net: ravb: Add PHY reset GPIO support

Add support for obtaining PHY reset GPIO from DT and toggling it
before configuring the PHY to put the PHY into defined state.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index 8db127ba06fa71077e9731d20947facb6cb32428..dc7a52534e5c86ba23b0a3238086cfe132d77947 100644 (file)
--- a/drivers/net/ravb.c
+++ b/drivers/net/ravb.c
@@ -18,6 +18,7 @@
 #include <linux/mii.h>
 #include <wait_bit.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 
 /* Registers */
 #define RAVB_REG_CCC           0x000
@@ -122,6 +123,7 @@ struct ravb_priv {
        struct mii_dev          *bus;
        void __iomem            *iobase;
        struct clk              clk;
+       struct gpio_desc        reset_gpio;
 };
 
 static inline void ravb_flush_dcache(u32 addr, u32 len)
@@ -302,6 +304,13 @@ static int ravb_phy_config(struct udevice *dev)
        struct phy_device *phydev;
        int mask = 0xffffffff, reg;
 
+       if (dm_gpio_is_valid(&eth->reset_gpio)) {
+               dm_gpio_set_value(&eth->reset_gpio, 1);
+               mdelay(20);
+               dm_gpio_set_value(&eth->reset_gpio, 0);
+               mdelay(1);
+       }
+
        phydev = phy_find_by_mask(eth->bus, mask, pdata->phy_interface);
        if (!phydev)
                return -ENODEV;
@@ -483,6 +492,9 @@ static int ravb_probe(struct udevice *dev)
        if (ret < 0)
                goto err_mdio_alloc;
 
+       gpio_request_by_name_nodev(dev_ofnode(dev), "reset-gpios", 0,
+                                  &eth->reset_gpio, GPIOD_IS_OUT);
+
        mdiodev = mdio_alloc();
        if (!mdiodev) {
                ret = -ENOMEM;
@@ -516,6 +528,7 @@ static int ravb_remove(struct udevice *dev)
        free(eth->phydev);
        mdio_unregister(eth->bus);
        mdio_free(eth->bus);
+       dm_gpio_free(dev, &eth->reset_gpio);
        unmap_physmem(eth->iobase, MAP_NOCACHE);
 
        return 0;