#include <asm/arch/cpu.h>
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
/* Information about a GPIO bank */
struct omap_gpio_platdata {
/*
* Other misc defines
*/
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
#define ATMEL_PIO_PORTS 3 /* these SoCs have 3 PIO */
#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
#endif
#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
#define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
#define gpio_status() gpio_info()
#endif
#define GPIO_NAME_SIZE 20
};
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
static const struct omap_gpio_platdata am33xx_gpio[] = {
{ 0, AM33XX_GPIO0_BASE },
{ 1, AM33XX_GPIO1_BASE },
#endif
#endif
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
static const struct gpio_bank gpio_bank_am33xx[] = {
{ (void *)AM33XX_GPIO0_BASE },
{ (void *)AM33XX_GPIO1_BASE },
static void omap3_invalidate_l2_cache_secure(void);
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#if !CONFIG_IS_ENABLED(OF_CONTROL)
/* Manually initialize GPIO banks when OF_CONTROL doesn't */
static const struct omap_gpio_platdata omap34xx_gpio[] = {
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
static struct gpio_bank gpio_bank_54xx[8] = {
{ (void *)OMAP54XX_GPIO1_BASE },
{ (void *)OMAP54XX_GPIO2_BASE },
return 0;
}
-#if IS_ENABLED(CONFIG_DM_GPIO)
+#if CONFIG_IS_ENABLED(DM_GPIO)
static void board_gpio_init(void)
{
/* TODO */
return 0;
}
-#if IS_ENABLED(CONFIG_DM_GPIO)
+#if CONFIG_IS_ENABLED(DM_GPIO)
static void board_gpio_init(void)
{
struct gpio_desc desc;
if TARGET_GW_VENTANA
+config DM_GPIO
+ default y
+
config SYS_BOARD
default "gw_ventana"
return 0;
}
-#if IS_ENABLED(CONFIG_DM_GPIO)
+#if CONFIG_IS_ENABLED(DM_GPIO)
static void board_gpio_init(void)
{
/* TODO */
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
CONFIG_SPL_OF_TRANSLATE=y
+# CONFIG_SPL_DM_GPIO is not set
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
particular GPIOs that they provide. The uclass interface
is defined in include/asm-generic/gpio.h.
+config SPL_DM_GPIO
+ bool "Enable Driver Model for GPIO drivers in SPL"
+ depends on DM_GPIO && SPL_DM && SPL_GPIO_SUPPORT
+ default y
+ help
+ Enable driver model for GPIO access in SPL. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
+
+config TPL_DM_GPIO
+ bool "Enable Driver Model for GPIO drivers in TPL"
+ depends on DM_GPIO && TPL_DM && TPL_GPIO_SUPPORT
+ default y
+ help
+ Enable driver model for GPIO access in TPL. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
+
config GPIO_HOG
bool "Enable GPIO hog support"
depends on DM_GPIO
obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o
obj-$(CONFIG_AXP_GPIO) += axp_gpio.o
endif
-obj-$(CONFIG_DM_GPIO) += gpio-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o
obj-$(CONFIG_$(SPL_)DM_PCA953X) += pca953x_gpio.o
+ifdef CONFIG_$(SPL_TPL_)GPIO
obj-$(CONFIG_DM_74X164) += 74x164_gpio.o
+endif
obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o
return 0;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
static bool at91_get_port_output(struct at91_port *at91_port, int offset)
{
u32 mask, val;
return 0;
}
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
/* Common GPIO API */
int gpio_request(unsigned gpio, const char *label)
}
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct at91_port_priv {
struct at91_port *regs;
return (readl(&port_base->pdsr) & mask) ? 1 : 0;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct atmel_pioctrl_data {
u32 nbanks;
#include "da8xx_gpio.h"
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
#include <asm/arch/hardware.h>
#include <asm/arch/davinci_misc.h>
_gpio_set_value(bank, gpio, value);
return 0;
}
-#ifndef CONFIG_DM_GPIO
+
+#if !CONFIG_IS_ENABLED(DM_GPIO)
void gpio_info(void)
{
return _gpio_set_value(bank, gpio, value);
}
-#else /* CONFIG_DM_GPIO */
+#else /* DM_GPIO */
static struct davinci_gpio *davinci_get_gpio_bank(struct udevice *dev, unsigned int offset)
{
#define MAX_NUM_GPIOS 144
#define GPIO_BIT(gp) ((gp) & 0x1F)
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
/* Information about a GPIO bank */
struct davinci_gpio_platdata {
struct gpio_regs *regs;
};
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
#define GPIO_TO_PORT(n) ((n) / 32)
/* GPIO port description */
}
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#include <fdtdec.h>
static int mxc_gpio_is_output(struct gpio_regs *regs, int offset)
{
return (bank << MXS_PAD_BANK_SHIFT) | (pin << MXS_PAD_PIN_SHIFT);
}
-#else /* CONFIG_DM_GPIO */
+#else /* DM_GPIO */
#include <dm.h>
#include <asm/gpio.h>
#include <dt-structs.h>
.ofdata_to_platdata = mxs_ofdata_to_platdata,
#endif
};
-#endif /* CONFIG_DM_GPIO */
+#endif /* DM_GPIO */
#define OMAP_GPIO_DIR_OUT 0
#define OMAP_GPIO_DIR_IN 1
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#define GPIO_PER_BANK 32
return (__raw_readl(reg) & (1 << gpio)) != 0;
}
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
static inline const struct gpio_bank *get_gpio_bank(int gpio)
{
#endif
};
-#endif /* CONFIG_DM_GPIO */
+#endif /* !DM_GPIO */
int gpio_count;
};
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
static int sunxi_gpio_output(u32 pin, u32 val)
{
u32 dat;
return -1;
return group * 32 + pin;
}
-#endif
+#endif /* DM_GPIO */
int sunxi_name_to_gpio_bank(const char *name)
{
return -1;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
/* TODO(sjg@chromium.org): Remove this function and use device tree */
int sunxi_name_to_gpio(const char *name)
{
.bind = gpio_sunxi_bind,
.probe = gpio_sunxi_probe,
};
-#endif
+#endif /* DM_GPIO */
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#include <asm/gpio.h>
#endif
return chip->offset_len;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
static void i2c_gpio_set_pin(struct gpio_desc *pin, int bit)
{
if (bit)
{
return -ENOSYS;
}
-#endif // CONFIG_DM_GPIO
+#endif /* DM_GPIO */
int i2c_deblock(struct udevice *bus)
{
static int pca954x_probe(struct udevice *dev)
{
- if (IS_ENABLED(CONFIG_DM_GPIO)) {
+ if (CONFIG_IS_ENABLED(DM_GPIO)) {
struct pca954x_priv *priv = dev_get_priv(dev);
int err;
static int pca954x_remove(struct udevice *dev)
{
- if (IS_ENABLED(CONFIG_DM_GPIO)) {
+ if (CONFIG_IS_ENABLED(DM_GPIO)) {
struct pca954x_priv *priv = dev_get_priv(dev);
if (dm_gpio_is_valid(&priv->gpio_mux_reset))
struct udevice *vqmmc_dev;
struct udevice *vmmc_dev;
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc cd_gpio;
struct gpio_desc wp_gpio;
#endif
return -ETIMEDOUT;
}
} else {
-#ifdef CONFIG_DM_GPIO
- if (dm_gpio_is_valid(&priv->wp_gpio) && dm_gpio_get_value(&priv->wp_gpio)) {
+#if CONFIG_IS_ENABLED(DM_GPIO)
+ if (dm_gpio_is_valid(&priv->wp_gpio) &&
+ dm_gpio_get_value(&priv->wp_gpio)) {
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
return -ETIMEDOUT;
}
#if CONFIG_IS_ENABLED(DM_MMC)
if (priv->non_removable)
return 1;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
if (dm_gpio_is_valid(&priv->cd_gpio))
return dm_gpio_get_value(&priv->cd_gpio);
#endif
priv->non_removable = 1;
} else {
priv->non_removable = 0;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
GPIOD_IS_IN);
#endif
priv->wp_enable = 1;
} else {
priv->wp_enable = 0;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio,
GPIOD_IS_IN);
#endif
{
int ret;
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
if (!gpio_is_valid(gpio))
return -1;
#endif
return ret;
}
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO)
+#if defined(CONFIG_DM_ETH) && CONFIG_IS_ENABLED(DM_GPIO)
static int dw_mdio_reset(struct mii_dev *bus)
{
struct udevice *dev = bus->priv;
bus->read = dw_mdio_read;
bus->write = dw_mdio_write;
snprintf(bus->name, sizeof(bus->name), "%s", name);
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO)
+#if defined(CONFIG_DM_ETH) && CONFIG_IS_ENABLED(DM_GPIO)
bus->reset = dw_mdio_reset;
#endif
int designware_eth_ofdata_to_platdata(struct udevice *dev)
{
struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct dw_eth_dev *priv = dev_get_priv(dev);
#endif
struct eth_pdata *pdata = &dw_pdata->eth_pdata;
const char *phy_mode;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
int reset_flags = GPIOD_IS_OUT;
#endif
int ret = 0;
pdata->max_speed = dev_read_u32_default(dev, "max-speed", 0);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
if (dev_read_bool(dev, "snps,reset-active-low"))
reset_flags |= GPIOD_ACTIVE_LOW;
#ifndef _DW_ETH_H
#define _DW_ETH_H
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#include <asm-generic/gpio.h>
#endif
#ifndef CONFIG_DM_ETH
struct eth_device *dev;
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
#endif
#ifdef CONFIG_CLK
return 0;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
/* FEC GPIO reset */
static void fec_gpio_reset(struct fec_priv *priv)
{
}
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
fec_gpio_reset(priv);
#endif
/* Reset chip. */
device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
ret = gpio_request_by_name(dev, "phy-reset-gpios", 0,
&priv->phy_reset_gpio, GPIOD_IS_OUT);
if (ret < 0)
#ifdef CONFIG_DM_REGULATOR
struct udevice *phy_supply;
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc phy_reset_gpio;
uint32_t reset_delay;
uint32_t reset_post_delay;
int init;
int phyaddr;
struct phy_device *phydev;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc phy_reset_gpio;
#endif
struct mii_dev *bus;
if (ret)
return ret;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
gpio_request_by_name(dev, "phy-reset-gpios", 0,
&pp->phy_reset_gpio, GPIOD_IS_OUT);
phy_interface_t phy_interface;
int phyaddr;
struct udevice *mdio_dev;
-#ifdef CONFIG_DM_GPIO
+ struct mii_dev *bus;
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc phy_reset_gpio;
struct gpio_desc phy_tx_disable_gpio;
#endif
return -EINVAL;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
gpio_request_by_name(dev, "phy-reset-gpios", 0,
&port->phy_reset_gpio, GPIOD_IS_OUT);
gpio_request_by_name(dev, "marvell,sfp-tx-disable-gpio", 0,
return 0;
}
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
/* Port GPIO initialization */
static void mvpp2_gpio_init(struct mvpp2_port *port)
{
}
mvpp2_port_power_up(port);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
mvpp2_gpio_init(port);
#endif
#include <net.h>
#include <reset.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#include <asm-generic/gpio.h>
#endif
struct clk ephy_clk;
struct reset_ctl tx_rst;
struct reset_ctl ephy_rst;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
#endif
};
return ret;
}
-#if defined(CONFIG_DM_GPIO)
+#if CONFIG_IS_ENABLED(DM_GPIO)
static int sun8i_mdio_reset(struct mii_dev *bus)
{
struct udevice *dev = bus->priv;
bus->write = sun8i_mdio_write;
snprintf(bus->name, sizeof(bus->name), name);
bus->priv = (void *)priv;
-#if defined(CONFIG_DM_GPIO)
+#if CONFIG_IS_ENABLED(DM_GPIO)
bus->reset = sun8i_mdio_reset;
#endif
const fdt32_t *reg;
int node = dev_of_offset(dev);
int offset = 0;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
int reset_flags = GPIOD_IS_OUT;
#endif
int ret;
printf("%s: Invalid RX delay value %d\n", __func__,
sun8i_pdata->rx_delay_ps);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
if (fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
"snps,reset-active-low"))
reset_flags |= GPIOD_ACTIVE_LOW;
{
struct pcie_advk *pcie = dev_get_priv(dev);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio,
}
#else
dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");
-#endif /* CONFIG_DM_GPIO */
+#endif /* DM_GPIO */
pcie->first_busno = dev->seq;
pcie->dev = pci_get_controller(dev);
struct pcie_dw_mvebu *pcie = dev_get_priv(dev);
struct udevice *ctlr = pci_get_controller(dev);
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
gpio_request_by_name(dev, "marvell,reset-gpio", 0, &reset_gpio,
}
#else
debug("PCIE Reset on GPIO support is missing\n");
-#endif /* CONFIG_DM_GPIO */
+#endif /* DM_GPIO */
pcie->first_busno = dev->seq;
#ifdef CONFIG_DM_SPI
#include <asm/arch/at91_spi.h>
#endif
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
#include <asm/gpio.h>
#endif
unsigned int freq; /* Default frequency */
unsigned int mode;
ulong bus_clk_rate;
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc cs_gpios[MAX_CS_COUNT];
#endif
};
static void atmel_spi_cs_activate(struct udevice *dev)
{
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct udevice *bus = dev_get_parent(dev);
struct atmel_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
static void atmel_spi_cs_deactivate(struct udevice *dev)
{
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct udevice *bus = dev_get_parent(dev);
struct atmel_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
bus_plat->regs = (struct at91_spi *)devfdt_get_addr(bus);
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
struct atmel_spi_priv *priv = dev_get_priv(bus);
int i;
static int request_gpio_cs(struct udevice *bus)
{
-#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD)
struct dw_spi_priv *priv = dev_get_priv(bus);
int ret;
*/
__weak void external_cs_manage(struct udevice *dev, bool on)
{
-#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD)
struct dw_spi_priv *priv = dev_get_priv(dev->parent);
if (!dm_gpio_is_valid(&priv->cs_gpio))
/* Use the TPM v2 stack */
priv->version = TPM_V2;
- if (IS_ENABLED(CONFIG_DM_GPIO)) {
+ if (CONFIG_IS_ENABLED(DM_GPIO)) {
struct gpio_desc reset_gpio;
ret = gpio_request_by_name(dev, "gpio-reset", 0,
#ifndef CONFIG_SPL_DM
#undef CONFIG_DM_SERIAL
-#undef CONFIG_DM_GPIO
#undef CONFIG_DM_I2C
#undef CONFIG_DM_SPI
#endif
#ifndef __AT91_SAMA5_COMMON_H
#define __AT91_SAMA5_COMMON_H
+#include <linux/kconfig.h>
+
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#endif
/* general purpose I/O */
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
#define CONFIG_AT91_GPIO
#endif
-
/*
* BOOTP options
*/
/* Driver Model */
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_GPIO
#define CONFIG_DM_THERMAL
#endif
#define CONFIG_SYS_I2C_SPEED 100000
#endif
+/* Note: This is incorrect and should move to Kconfig / defconfig */
#ifdef CONFIG_DM_GPIO
#define CONFIG_DM_74X164
#endif
ifndef CONFIG_SPL_DM
CONFIG_DM_SERIAL=
-CONFIG_DM_GPIO=
CONFIG_DM_I2C=
CONFIG_DM_SPI=
CONFIG_DM_SPI_FLASH=