arm, i.mx27: add support for magnesium board from projectiondesign
authorHeiko Schocher <hs@denx.de>
Fri, 5 Mar 2010 06:36:33 +0000 (07:36 +0100)
committertrix <trix@windriver.com>
Fri, 30 Apr 2010 10:23:23 +0000 (05:23 -0500)
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>
MAINTAINERS
MAKEALL
Makefile
board/logicpd/imx27lite/imx27lite.c
include/configs/imx27lite-common.h [new file with mode: 0644]
include/configs/imx27lite.h
include/configs/magnesium.h [new file with mode: 0644]

index a5d5835d6206f2b0478a0682e6c87c7f560d1d25..4e6d73511d53a7f28e01f7d024599c987819d5d0 100644 (file)
@@ -738,6 +738,10 @@ Jens Scharsig <esw@bus-elektronik.de>
 
        eb_cpux9k2      ARM920T (AT91RM9200 SoC)
 
+Heiko Schocher <hs@denx.de>
+
+       magnesium       i.MX27
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
        csb226          xscale
diff --git a/MAKEALL b/MAKEALL
index 34bc4a171b341d8eb06434e65b3c97a23f567a3a..e2bba1c57614d66283b657998ab8608676677b33 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -569,6 +569,7 @@ LIST_ARM9="                 \
        edb9315a                \
        imx27lite               \
        lpd7a400                \
+       magnesium               \
        mv88f6281gtw_ge         \
        mx1ads                  \
        mx1fs2                  \
index 25e3b8c51c7e3c35ffcaa6589d1fa32ae9f77329..9213ec2a92cdb9eb3ce65c859756361b6e4e78da 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2940,6 +2940,7 @@ davinci_dm365evm_config : unconfig
 davinci_dm6467evm_config :     unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
 
+magnesium_config       \
 imx27lite_config:      unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
 
index 63375d5da0cfa51d6623c2bd42776470b683d5f4..442741547bcce3c5e8a787ce4e02d647dfa213dc 100644 (file)
@@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init (void)
 {
        struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+       struct system_control_regs *sc_regs =
+               (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+#endif
 
        gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -43,9 +47,20 @@ int board_init (void)
                                &regs->port[PORTC].dr);
 #endif
 #ifdef CONFIG_MXC_MMC
+#if defined(CONFIG_MAGNESIUM)
+       mx27_sd1_init_pins();
+#else
        mx27_sd2_init_pins();
 #endif
+#endif
 
+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+       /*
+        * set in FMCR NF_FMS Bit(5) to 1
+        * (NAND Flash with 2 Kbyte page size)
+        */
+       writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
+#endif
        return 0;
 }
 
@@ -68,6 +83,7 @@ int dram_init (void)
 
 int checkboard(void)
 {
-       printf("LogicPD imx27lite\n");
+       puts ("Board: ");
+       puts(CONFIG_BOARDNAME);
        return 0;
 }
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
new file mode 100644 (file)
index 0000000..1da8602
--- /dev/null
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMX27LITE_COMMON_CONFIG_H
+#define __IMX27LITE_COMMON_CONFIG_H
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
+#define CONFIG_MX27
+#define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
+#define CONFIG_SYS_HZ          1000
+
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
+
+/*
+ * Lowlevel configuration
+ */
+#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
+               (ESDCFG_TRC(10) |       \
+               ESDCFG_TRCD(3) |        \
+               ESDCFG_TCAS(cas) |      \
+               ESDCFG_TRRD(1) |        \
+               ESDCFG_TRAS(5) |        \
+               ESDCFG_TWR |            \
+               ESDCFG_TMRD(2) |        \
+               ESDCFG_TRP(2) |         \
+               ESDCFG_TXP(3))
+
+#define SDRAM_ESDCTL_REGISTER_VAL      \
+               (ESDCTL_PRCT(0) |       \
+                ESDCTL_BL |            \
+                ESDCTL_PWDT(0) |       \
+                ESDCTL_SREFR(3) |      \
+                ESDCTL_DSIZ_32 |       \
+                ESDCTL_COL10 |         \
+                ESDCTL_ROW13 |         \
+                ESDCTL_SDE)
+
+#define SDRAM_ALL_VAL          0xf00
+
+#define SDRAM_MODE_REGISTER_VAL        0x33    /* BL: 8, CAS: 3 */
+#define SDRAM_EXT_MODE_REGISTER_VAL    0x1000000
+
+#define MPCTL0_VAL     0x1ef15d5
+
+#define SPCTL0_VAL     0x043a1c09
+
+#define CSCR_VAL       0x33f08107
+
+#define PCDR0_VAL      0x120470c3
+#define PCDR1_VAL      0x03030303
+#define PCCR0_VAL      0xffffffff
+#define PCCR1_VAL      0xfffffffc
+
+#define AIPI1_PSR0_VAL 0x20040304
+#define AIPI1_PSR1_VAL 0xdffbfcfb
+#define AIPI2_PSR0_VAL 0x07ffc200
+#define AIPI2_PSR1_VAL 0xffffffff
+
+/*
+ * Memory Info
+ */
+/* malloc() len */
+#define CONFIG_SYS_MALLOC_LEN          (0x10000 + 512 * 1024)
+/* reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE       128
+/* memtest start address */
+#define CONFIG_SYS_MEMTEST_START       0xA0000000
+#define CONFIG_SYS_MEMTEST_END         0xA1000000      /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE       (256 * 1024)    /* regular stack */
+#define PHYS_SDRAM_1           0xA0000000      /* DDR Start */
+#define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX27_UART1
+#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
+#define CONFIG_BAUDRATE                115200          /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION            1
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of flash banks */
+/* CS2 Base address */
+#define PHYS_FLASH_1                   0xc0000000
+/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT      (PHYS_FLASH_SIZE / \
+               CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         0x40000         /* Reserve 256KiB */
+#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR         0x1f
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * MTD
+ */
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           0xd8000000
+#define CONFIG_JFFS2_NAND
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * MTD partitions
+ */
+#define CONFIG_CMD_MTDPARTS
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
+               sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY       5
+
+#define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define xstr(s)        str(s)
+#define str(s) #s
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "netdev=eth0\0"                                                 \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "addtty=setenv bootargs ${bootargs}"                            \
+               " console=ttymxc0,${baudrate}\0"                        \
+       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
+       "addmisc=setenv bootargs ${bootargs}\0"                         \
+       "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"                 \
+       "kernel_addr_r=a0800000\0"                                      \
+       "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
+       "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
+       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
+               "run nfsargs addip addtty addmtd addmisc;"              \
+               "bootm\0"                                               \
+       "bootcmd=run net_nfs\0"                                 \
+       "load=tftp ${loadaddr} ${u-boot}\0"                             \
+       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)             \
+               " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)      \
+               " +${filesize};cp.b ${fileaddr} "                       \
+               xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"          \
+       "upd=run load update\0"                                         \
+       "mtdids=" MTDIDS_DEFAULT "\0"                                   \
+       "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
+
+#endif /* __IMX27LITE_COMMON_CONFIG_H */
index ee749ecd2f62938073e2c7001eec82516d2eab44..72f6e80ede967f6675823fb06b36fae7d26b3bc4 100644 (file)
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
 /*
  * SoC Configuration
  */
-#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
-#define CONFIG_MX27
 #define CONFIG_IMX27LITE
-#define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
-#define CONFIG_SYS_HZ          1000
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
-               (ESDCFG_TRC(10) |       \
-               ESDCFG_TRCD(3) |        \
-               ESDCFG_TCAS(cas) |      \
-               ESDCFG_TRRD(1) |        \
-               ESDCFG_TRAS(5) |        \
-               ESDCFG_TWR |            \
-               ESDCFG_TMRD(2) |        \
-               ESDCFG_TRP(2) |         \
-               ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL      \
-               (ESDCTL_PRCT(0) |       \
-                ESDCTL_BL |            \
-                ESDCTL_PWDT(0) |       \
-                ESDCTL_SREFR(3) |      \
-                ESDCTL_DSIZ_32 |       \
-                ESDCTL_COL10 |         \
-                ESDCTL_ROW13 |         \
-                ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL          0xf00
-
-#define SDRAM_MODE_REGISTER_VAL        0x33    /* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL    0x1000000
-
-#define MPCTL0_VAL     0x1ef15d5
-
-#define SPCTL0_VAL     0x043a1c09
-
-#define CSCR_VAL       0x33f08107
-
-#define PCDR0_VAL      0x120470c3
-#define PCDR1_VAL      0x03030303
-#define PCCR0_VAL      0xffffffff
-#define PCCR1_VAL      0xfffffffc
-
-#define AIPI1_PSR0_VAL 0x20040304
-#define AIPI1_PSR1_VAL 0xdffbfcfb
-#define AIPI2_PSR0_VAL 0x07ffc200
-#define AIPI2_PSR1_VAL 0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN          (0x10000 + 512 * 1024)
-/* reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       128
-/* memtest start address */
-#define CONFIG_SYS_MEMTEST_START       0xA0000000
-#define CONFIG_SYS_MEMTEST_END         0xA1000000      /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE       (256 * 1024)    /* regular stack */
-#define PHYS_SDRAM_1           0xA0000000      /* DDR Start */
-#define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
-#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_HOSTNAME                imx27
+#define CONFIG_BOARDNAME       "LogicPD imx27lite\n"
 
 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      1
-/* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION            1
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ       0x2000  /* 8KB sect size Intel Flash */
-/* end of flash */
 #define CONFIG_ENV_OFFSET              (PHYS_FLASH_SIZE - 0x20000)
-/* CS2 Base address */
-#define PHYS_FLASH_1                   0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-/* Flash size 2MB */
 #define PHYS_FLASH_SIZE                        0x200000
-#define CONFIG_SYS_MAX_FLASH_SECT      (PHYS_FLASH_SIZE / \
-               CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN         0x40000         /* Reserve 256KiB */
 #define CONFIG_ENV_SECT_SIZE           0x10000         /* Env sector Size */
-#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
-/* Address and size of Redundant Environment Sector    */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR         0x1f
-#define CONFIG_MII
-#define CONFIG_NET_MULTI
-
-/*
- * MTD
- */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-
-/*
- * NAND
- */
-#define CONFIG_NAND_MXC
-#define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 /*
  * SD/MMC
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
 #define CONFIG_MXC_MCI_REGS_BASE       0x10014000
-#define CONFIG_DOS_PARTITION
 
 /*
  * MTD partitions
  */
-#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT         "nor0=physmap-flash.0,nand0=mxc_nand.0"
 #define MTDPARTS_DEFAULT                       \
        "mtdparts="                             \
                        "22m(rootfs),"          \
                        "-(userfs)"
 
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
-#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
-               sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY       5
-
-#define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define xstr(s)        str(s)
-#define str(s) #s
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "netdev=eth0\0"                                                 \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs ${bootargs} "                            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
-       "addtty=setenv bootargs ${bootargs}"                            \
-               " console=ttymxc0,${baudrate}\0"                        \
-       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
-       "addmisc=setenv bootargs ${bootargs}\0"                         \
-       "u-boot=imx27/u-boot.bin\0"                                     \
-       "kernel_addr_r=a0800000\0"                                      \
-       "hostname=imx27\0"                                              \
-       "bootfile=imx27/uImage\0"                                       \
-       "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
-       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
-               "run nfsargs addip addtty addmtd addmisc;"              \
-               "bootm\0"                                               \
-       "bootcmd=run net_nfs\0"                                 \
-       "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)             \
-               " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)      \
-               " +${filesize};cp.b ${fileaddr} "                       \
-               xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"          \
-       "upd=run load update\0"                                         \
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
new file mode 100644 (file)
index 0000000..4fb7744
--- /dev/null
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MAGNESIUM
+#define CONFIG_HOSTNAME                magnesium
+#define CONFIG_BOARDNAME       "Projectiondesign magnesium\n"
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_SYS_FLASH_SECT_SZ       0x8000  /* 64KB sect size */
+#define CONFIG_ENV_OFFSET              (PHYS_FLASH_SIZE - 0x40000)
+#define PHYS_FLASH_SIZE                        0x800000
+#define CONFIG_ENV_SECT_SIZE           0x20000         /* Env sector Size */
+
+/*
+ * NAND
+ */
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MXC_MCI_REGS_BASE       0x10013000
+
+/*
+ * MTD partitions
+ */
+#define MTDIDS_DEFAULT         "nor0=physmap-flash.0,nand0=mxc_nand.0"
+#define MTDPARTS_DEFAULT                       \
+       "mtdparts="                             \
+               "physmap-flash.0:"              \
+                       "256k(U-Boot),"         \
+                       "7680k(user),"          \
+                       "128k(env1),"           \
+                       "128k(env2);"           \
+               "mxc_nand.0:"                   \
+                       "128k(IPL-SPL),"        \
+                       "4m(kernel),"           \
+                       "22m(rootfs),"          \
+                       "-(userfs)"
+
+#endif /* __CONFIG_H */