*/
#include <common.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
#include <asm/arch/clocks.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
#include <asm/utils.h>
-static inline u32 emif_num(u32 base)
+inline u32 emif_num(u32 base)
{
- if (base == OMAP44XX_EMIF1)
+ if (base == EMIF1_BASE)
return 1;
- else if (base == OMAP44XX_EMIF2)
+ else if (base == EMIF2_BASE)
return 2;
else
return 0;
}
+
static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
{
u32 mr;
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+ mr_addr |= cs << EMIF_REG_CS_SHIFT;
writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
if (omap_revision() == OMAP4430_ES2_0)
mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+ mr_addr |= cs << EMIF_REG_CS_SHIFT;
writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
}
u32 iodft;
iodft = readl(&emif->emif_iodft_tlgc);
- iodft |= OMAP44XX_REG_RESET_PHY_MASK;
+ iodft |= EMIF_REG_RESET_PHY_MASK;
writel(iodft, &emif->emif_iodft_tlgc);
}
* Enable refresh along with writing MR2
* Encoding of RL in MR2 is (RL - 2)
*/
- mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
+ mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
set_mr(base, cs, mr_addr, RL_FINAL - 2);
}
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
/* Not NVM */
- clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
+ clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
/*
* Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
* when EMIF_SDRAM_CONFIG register is written
*/
- setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+ setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
/*
* Set the SDRAM_CONFIG and PHY_CTRL for the
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
do_lpddr2_init(base, CS0);
- if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
+ if (regs->sdram_config & EMIF_REG_EBANK_MASK)
do_lpddr2_init(base, CS1);
writel(regs->sdram_config, &emif->emif_sdram_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
/* Enable refresh now */
- clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+ clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
}
-static void emif_update_timings(u32 base, const struct emif_regs *regs)
+void emif_update_timings(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- if (omap_revision() >= OMAP4460_ES1_0) {
+ if (omap_revision() == OMAP5430_ES1_0) {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
+ &emif->emif_l3_config);
+ } else if (omap_revision() >= OMAP4460_ES1_0) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
&emif->emif_l3_config);
} else {
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
-static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
-
/*
* Organization and refresh requirements for LPDDR2 devices of different
* types and densities. Derived from JESD209-2 section 2.4
{
u32 config_reg = 0;
- config_reg |= (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
+ config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT;
config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
- OMAP44XX_REG_IBANK_POS_SHIFT;
+ EMIF_REG_IBANK_POS_SHIFT;
- config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
+ config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT;
- config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
+ config_reg |= RL << EMIF_REG_CL_SHIFT;
config_reg |= addressing->row_sz[cs0_device->io_width] <<
- OMAP44XX_REG_ROWSIZE_SHIFT;
+ EMIF_REG_ROWSIZE_SHIFT;
- config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
+ config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT;
config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
- OMAP44XX_REG_EBANK_SHIFT;
+ EMIF_REG_EBANK_SHIFT;
config_reg |= addressing->col_sz[cs0_device->io_width] <<
- OMAP44XX_REG_PAGESIZE_SHIFT;
+ EMIF_REG_PAGESIZE_SHIFT;
return config_reg;
}
* division by 10000 to account for khz and x10 in t_REFI_us_x10
*/
val = addressing->t_REFI_us_x10 * freq_khz / 10000;
- ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
+ ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT;
return ref_ctrl;
}
{
u32 tim1 = 0, val = 0;
val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
+ tim1 |= val << EMIF_REG_T_WTR_SHIFT;
if (addressing->num_banks == BANKS8)
val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
else
val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
+ tim1 |= val << EMIF_REG_T_RRD_SHIFT;
val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
- tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
+ tim1 |= val << EMIF_REG_T_RC_SHIFT;
val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
+ tim1 |= val << EMIF_REG_T_RAS_SHIFT;
val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
+ tim1 |= val << EMIF_REG_T_WR_SHIFT;
val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
+ tim1 |= val << EMIF_REG_T_RCD_SHIFT;
val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
+ tim1 |= val << EMIF_REG_T_RP_SHIFT;
return tim1;
}
{
u32 tim2 = 0, val = 0;
val = max(min_tck->tCKE, timings->tCKE) - 1;
- tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
+ tim2 |= val << EMIF_REG_T_CKE_SHIFT;
val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
+ tim2 |= val << EMIF_REG_T_RTP_SHIFT;
/*
* tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
* same value
*/
val = ns_2_cycles(timings->tXSR) - 1;
- tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
- tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
+ tim2 |= val << EMIF_REG_T_XSRD_SHIFT;
+ tim2 |= val << EMIF_REG_T_XSNR_SHIFT;
val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
+ tim2 |= val << EMIF_REG_T_XP_SHIFT;
return tim2;
}
{
u32 tim3 = 0, val = 0;
val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
- tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
+ tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT;
val = ns_2_cycles(timings->tRFCab) - 1;
- tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
+ tim3 |= val << EMIF_REG_T_RFC_SHIFT;
val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
- tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
+ tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT;
val = ns_2_cycles(timings->tZQCS) - 1;
- tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
+ tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT;
val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
- tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
+ tim3 |= val << EMIF_REG_T_CKESR_SHIFT;
return tim3;
}
val =
EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
addressing->t_REFI_us_x10;
- zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
+ zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT;
- zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
+ zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT;
- zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
+ zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT;
- zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
+ zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT;
/*
* Assuming that two chipselects have a single calibration resistor
* that none of the boards today have calibration resistors per CS,
* it would be an unnecessary overhead.
*/
- zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
+ zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT;
- zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
+ zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT;
- zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
+ zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT;
return zq;
}
TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
if (is_derated)
interval *= 4;
- alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
+ alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT;
- alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
+ alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT;
- alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
+ alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT;
- alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
+ alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT;
- alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
+ alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT;
- alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
+ alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT;
return alert;
}
else
/*Maximum value in normal conditions - suggested by hw team */
val = 0x1FF;
- idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
+ idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT;
- idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
+ idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT;
return idle;
}
{
u32 phy = 0, val = 0;
- phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
+ phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT;
if (freq <= 100000000)
val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
else
val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
- phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+ phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
/* Other fields are constant magic values. Hardcode them together */
phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
- OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+ EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
return phy;
}
}
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
- .max_freq = 400000000,
- .RL = 6,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
- .max_freq = 333000000,
- .RL = 5,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
- .max_freq = 200000000,
- .RL = 3,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 20,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
-/*
- * Min tCK values specified by JESD209-2
- * Min tCK specifies the minimum duration of some AC timing parameters in terms
- * of the number of cycles. If the calculated number of cycles based on the
- * absolute time value is less than the min tCK value, min tCK value should
- * be used instead. This typically happens at low frequencies.
- */
-static const struct lpddr2_min_tck min_tck_jedec = {
- .tRL = 3,
- .tRP_AB = 3,
- .tRCD = 3,
- .tWR = 3,
- .tRAS_MIN = 3,
- .tRRD = 2,
- .tWTR = 2,
- .tXP = 2,
- .tRTP = 2,
- .tCKE = 3,
- .tCKESR = 3,
- .tFAW = 8
-};
-
-static const struct lpddr2_ac_timings const*
- jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
- &timings_jedec_200_mhz,
- &timings_jedec_333_mhz,
- &timings_jedec_400_mhz
-};
-
-static const struct lpddr2_device_timings jedec_default_timings = {
- .ac_timings = jedec_ac_timings,
- .min_tck = &min_tck_jedec
-};
-
-void emif_get_device_timings(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings)
-{
- /* Assume Identical devices on EMIF1 & EMIF2 */
- *cs0_device_timings = &jedec_default_timings;
- *cs1_device_timings = &jedec_default_timings;
-}
-#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
const char *get_lpddr2_type(u8 type_id)
{
struct lpddr2_device_details *lpddr2_dev_details)
{
u32 phy;
- u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
+ u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE;
+
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
if (!lpddr2_dev_details)
debug(">>do_sdram_init() %x\n", base);
in_sdram = running_from_sdram();
- emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
+ emif_nr = (base == EMIF1_BASE) ? 1 : 2;
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
emif_get_reg_dump(emif_nr, ®s);
debug("<<do_sdram_init() %x\n", base);
}
-static void emif_post_init_config(u32 base)
+void emif_post_init_config(u32 base)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 omap4_rev = omap_revision();
+ u32 omap_rev = omap_revision();
+
+ if (omap_rev == OMAP5430_ES1_0)
+ return;
/* reset phy on ES2.0 */
- if (omap4_rev == OMAP4430_ES2_0)
+ if (omap_rev == OMAP4430_ES2_0)
emif_reset_phy(base);
/* Put EMIF back in smart idle on ES1.0 */
- if (omap4_rev == OMAP4430_ES1_0)
+ if (omap_rev == OMAP4430_ES1_0)
writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
}
-static void dmm_init(u32 base)
+void dmm_init(u32 base)
{
const struct dmm_lisa_map_regs *lisa_map_regs;
if (emif1_size && emif2_size) {
mapped_size = min(emif1_size, emif2_size);
section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
- section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
+ section_map |= 0 << EMIF_SDRC_ADDR_SHIFT;
/* only MSB */
section_map |= (sys_addr >> 24) <<
- OMAP44XX_SYS_ADDR_SHIFT;
+ EMIF_SYS_ADDR_SHIFT;
section_map |= get_dmm_section_size_map(mapped_size * 2)
- << OMAP44XX_SYS_SIZE_SHIFT;
+ << EMIF_SYS_SIZE_SHIFT;
lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
emif1_size -= mapped_size;
emif2_size -= mapped_size;
if (emif1_size) {
section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
section_map |= get_dmm_section_size_map(emif1_size)
- << OMAP44XX_SYS_SIZE_SHIFT;
+ << EMIF_SYS_SIZE_SHIFT;
/* only MSB */
section_map |= (mapped_size >> 24) <<
- OMAP44XX_SDRC_ADDR_SHIFT;
+ EMIF_SDRC_ADDR_SHIFT;
/* only MSB */
- section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
+ section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT;
section_cnt--;
}
if (emif2_size) {
section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
section_map |= get_dmm_section_size_map(emif2_size) <<
- OMAP44XX_SYS_SIZE_SHIFT;
+ EMIF_SYS_SIZE_SHIFT;
/* only MSB */
- section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
+ section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT;
/* only MSB */
- section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
+ section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT;
section_cnt--;
}
if (omap_revision() >= OMAP4460_ES1_0) {
hw_lisa_map_regs =
- (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
+ (struct dmm_lisa_map_regs *)MA_BASE;
writel(lisa_map_regs->dmm_lisa_map_3,
&hw_lisa_map_regs->dmm_lisa_map_3);
bypass_dpll(&prcm->cm_clkmode_dpll_core);
- do_sdram_init(OMAP44XX_EMIF1);
- do_sdram_init(OMAP44XX_EMIF2);
+ do_sdram_init(EMIF1_BASE);
+ do_sdram_init(EMIF2_BASE);
if (!in_sdram) {
- dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
- emif_post_init_config(OMAP44XX_EMIF1);
- emif_post_init_config(OMAP44XX_EMIF2);
-
+ dmm_init(DMM_BASE);
+ emif_post_init_config(EMIF1_BASE);
+ emif_post_init_config(EMIF2_BASE);
}
/* for the shadow registers to take effect */
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
DECLARE_GLOBAL_DATA_PTR;
u32 omap_sdram_size(void)
{
u32 section, i, total_size = 0, size, addr;
+
for (i = 0; i < 4; i++) {
- section = __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4);
- addr = section & OMAP44XX_SYS_ADDR_MASK;
+ section = __raw_readl(DMM_BASE + i*4);
+ addr = section & EMIF_SYS_ADDR_MASK;
/* See if the address is valid */
- if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
- (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
- size = ((section & OMAP44XX_SYS_SIZE_MASK) >>
- OMAP44XX_SYS_SIZE_SHIFT);
- size = 1 << size;
- size *= SZ_16M;
+ if ((addr >= DRAM_ADDR_SPACE_START) &&
+ (addr < DRAM_ADDR_SPACE_END)) {
+ size = ((section & EMIF_SYS_SIZE_MASK) >>
+ EMIF_SYS_SIZE_SHIFT);
+ size = 1 << size;
+ size *= SZ_16M;
total_size += size;
}
}
+
return total_size;
}
COBJS += sdram_elpida.o
COBJS += hwinit.o
COBJS += clocks.o
+COBJS += emif.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
--- /dev/null
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
+ .max_freq = 400000000,
+ .RL = 6,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
+ .max_freq = 200000000,
+ .RL = 3,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 20,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+ jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_200_mhz,
+ &timings_jedec_400_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+ .ac_timings = jedec_ac_timings,
+ .min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Assume Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &jedec_default_timings;
+ *cs1_device_timings = &jedec_default_timings;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
#include <asm/arch/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
* MA 02111-1307 USA
*/
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
#include <asm/arch/sys_proto.h>
/*
--- /dev/null
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+ .max_freq = 532000000,
+ .RL = 8,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+ jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+ .ac_timings = jedec_ac_timings,
+ .min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Assume Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &jedec_default_timings;
+ *cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
--- /dev/null
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_532_mhz_1cs = {
+ .sdram_config_init = 0x80801aB2,
+ .sdram_config = 0x808022B2,
+ .ref_ctrl = 0x0000081A,
+ .sdram_tim1 = 0x772F6873,
+ .sdram_tim2 = 0x304A129A,
+ .sdram_tim3 = 0x02F7E45F,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x000B3215,
+ .temp_alert_config = 0x08000A05,
+ .emif_ddr_phy_ctlr_1_init = 0x0E38200D,
+ .emif_ddr_phy_ctlr_1 = 0x0E38200D
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+ *regs = &emif_regs_elpida_532_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+ __attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+ **dmm_lisa_regs)
+{
+ *dmm_lisa_regs = &lisa_map_4G_x_1_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+ __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+ .type = LPDDR2_TYPE_S4,
+ .density = LPDDR2_DENSITY_4Gb,
+ .io_width = LPDDR2_IO_WIDTH_32,
+ .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+{
+ /* EMIF1 & EMIF2 have identical configuration */
+ *cs0_device_details = elpida_4G_S4_details;
+
+ /* Nothing is conected on cs1 */
+ cs1_device_details = NULL;
+}
+
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+ __attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+ .max_freq = 532000000,
+ .RL = 8,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings elpida_4G_S4_timings = {
+ .ac_timings = elpida_ac_timings,
+ .min_tck = &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &elpida_4G_S4_timings;
+ *cs1_device_timings = NULL;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+ __attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
+++ /dev/null
-/*
- * OMAP44xx EMIF header
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Aneesh V <aneesh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EMIF_H_
-#define _EMIF_H_
-#include <asm/types.h>
-#include <common.h>
-
-/* Base address */
-#define OMAP44XX_EMIF1 0x4c000000
-#define OMAP44XX_EMIF2 0x4d000000
-
-/* Registers shifts and masks */
-
-/* EMIF_MOD_ID_REV */
-#define OMAP44XX_REG_SCHEME_SHIFT 30
-#define OMAP44XX_REG_SCHEME_MASK (0x3 << 30)
-#define OMAP44XX_REG_MODULE_ID_SHIFT 16
-#define OMAP44XX_REG_MODULE_ID_MASK (0xfff << 16)
-#define OMAP44XX_REG_RTL_VERSION_SHIFT 11
-#define OMAP44XX_REG_RTL_VERSION_MASK (0x1f << 11)
-#define OMAP44XX_REG_MAJOR_REVISION_SHIFT 8
-#define OMAP44XX_REG_MAJOR_REVISION_MASK (0x7 << 8)
-#define OMAP44XX_REG_MINOR_REVISION_SHIFT 0
-#define OMAP44XX_REG_MINOR_REVISION_MASK (0x3f << 0)
-
-/* STATUS */
-#define OMAP44XX_REG_BE_SHIFT 31
-#define OMAP44XX_REG_BE_MASK (1 << 31)
-#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT 30
-#define OMAP44XX_REG_DUAL_CLK_MODE_MASK (1 << 30)
-#define OMAP44XX_REG_FAST_INIT_SHIFT 29
-#define OMAP44XX_REG_FAST_INIT_MASK (1 << 29)
-#define OMAP44XX_REG_PHY_DLL_READY_SHIFT 2
-#define OMAP44XX_REG_PHY_DLL_READY_MASK (1 << 2)
-
-/* SDRAM_CONFIG */
-#define OMAP44XX_REG_SDRAM_TYPE_SHIFT 29
-#define OMAP44XX_REG_SDRAM_TYPE_MASK (0x7 << 29)
-#define OMAP44XX_REG_IBANK_POS_SHIFT 27
-#define OMAP44XX_REG_IBANK_POS_MASK (0x3 << 27)
-#define OMAP44XX_REG_DDR_TERM_SHIFT 24
-#define OMAP44XX_REG_DDR_TERM_MASK (0x7 << 24)
-#define OMAP44XX_REG_DDR2_DDQS_SHIFT 23
-#define OMAP44XX_REG_DDR2_DDQS_MASK (1 << 23)
-#define OMAP44XX_REG_DYN_ODT_SHIFT 21
-#define OMAP44XX_REG_DYN_ODT_MASK (0x3 << 21)
-#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT 20
-#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK (1 << 20)
-#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT 18
-#define OMAP44XX_REG_SDRAM_DRIVE_MASK (0x3 << 18)
-#define OMAP44XX_REG_CWL_SHIFT 16
-#define OMAP44XX_REG_CWL_MASK (0x3 << 16)
-#define OMAP44XX_REG_NARROW_MODE_SHIFT 14
-#define OMAP44XX_REG_NARROW_MODE_MASK (0x3 << 14)
-#define OMAP44XX_REG_CL_SHIFT 10
-#define OMAP44XX_REG_CL_MASK (0xf << 10)
-#define OMAP44XX_REG_ROWSIZE_SHIFT 7
-#define OMAP44XX_REG_ROWSIZE_MASK (0x7 << 7)
-#define OMAP44XX_REG_IBANK_SHIFT 4
-#define OMAP44XX_REG_IBANK_MASK (0x7 << 4)
-#define OMAP44XX_REG_EBANK_SHIFT 3
-#define OMAP44XX_REG_EBANK_MASK (1 << 3)
-#define OMAP44XX_REG_PAGESIZE_SHIFT 0
-#define OMAP44XX_REG_PAGESIZE_MASK (0x7 << 0)
-
-/* SDRAM_CONFIG_2 */
-#define OMAP44XX_REG_CS1NVMEN_SHIFT 30
-#define OMAP44XX_REG_CS1NVMEN_MASK (1 << 30)
-#define OMAP44XX_REG_EBANK_POS_SHIFT 27
-#define OMAP44XX_REG_EBANK_POS_MASK (1 << 27)
-#define OMAP44XX_REG_RDBNUM_SHIFT 4
-#define OMAP44XX_REG_RDBNUM_MASK (0x3 << 4)
-#define OMAP44XX_REG_RDBSIZE_SHIFT 0
-#define OMAP44XX_REG_RDBSIZE_MASK (0x7 << 0)
-
-/* SDRAM_REF_CTRL */
-#define OMAP44XX_REG_INITREF_DIS_SHIFT 31
-#define OMAP44XX_REG_INITREF_DIS_MASK (1 << 31)
-#define OMAP44XX_REG_SRT_SHIFT 29
-#define OMAP44XX_REG_SRT_MASK (1 << 29)
-#define OMAP44XX_REG_ASR_SHIFT 28
-#define OMAP44XX_REG_ASR_MASK (1 << 28)
-#define OMAP44XX_REG_PASR_SHIFT 24
-#define OMAP44XX_REG_PASR_MASK (0x7 << 24)
-#define OMAP44XX_REG_REFRESH_RATE_SHIFT 0
-#define OMAP44XX_REG_REFRESH_RATE_MASK (0xffff << 0)
-
-/* SDRAM_REF_CTRL_SHDW */
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT 0
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0)
-
-/* SDRAM_TIM_1 */
-#define OMAP44XX_REG_T_RP_SHIFT 25
-#define OMAP44XX_REG_T_RP_MASK (0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHIFT 21
-#define OMAP44XX_REG_T_RCD_MASK (0xf << 21)
-#define OMAP44XX_REG_T_WR_SHIFT 17
-#define OMAP44XX_REG_T_WR_MASK (0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHIFT 12
-#define OMAP44XX_REG_T_RAS_MASK (0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHIFT 6
-#define OMAP44XX_REG_T_RC_MASK (0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHIFT 3
-#define OMAP44XX_REG_T_RRD_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHIFT 0
-#define OMAP44XX_REG_T_WTR_MASK (0x7 << 0)
-
-/* SDRAM_TIM_1_SHDW */
-#define OMAP44XX_REG_T_RP_SHDW_SHIFT 25
-#define OMAP44XX_REG_T_RP_SHDW_MASK (0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHDW_SHIFT 21
-#define OMAP44XX_REG_T_RCD_SHDW_MASK (0xf << 21)
-#define OMAP44XX_REG_T_WR_SHDW_SHIFT 17
-#define OMAP44XX_REG_T_WR_SHDW_MASK (0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHDW_SHIFT 12
-#define OMAP44XX_REG_T_RAS_SHDW_MASK (0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHDW_SHIFT 6
-#define OMAP44XX_REG_T_RC_SHDW_MASK (0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHDW_SHIFT 3
-#define OMAP44XX_REG_T_RRD_SHDW_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_WTR_SHDW_MASK (0x7 << 0)
-
-/* SDRAM_TIM_2 */
-#define OMAP44XX_REG_T_XP_SHIFT 28
-#define OMAP44XX_REG_T_XP_MASK (0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHIFT 25
-#define OMAP44XX_REG_T_ODT_MASK (0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHIFT 16
-#define OMAP44XX_REG_T_XSNR_MASK (0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHIFT 6
-#define OMAP44XX_REG_T_XSRD_MASK (0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHIFT 3
-#define OMAP44XX_REG_T_RTP_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHIFT 0
-#define OMAP44XX_REG_T_CKE_MASK (0x7 << 0)
-
-/* SDRAM_TIM_2_SHDW */
-#define OMAP44XX_REG_T_XP_SHDW_SHIFT 28
-#define OMAP44XX_REG_T_XP_SHDW_MASK (0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHDW_SHIFT 25
-#define OMAP44XX_REG_T_ODT_SHDW_MASK (0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT 16
-#define OMAP44XX_REG_T_XSNR_SHDW_MASK (0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT 6
-#define OMAP44XX_REG_T_XSRD_SHDW_MASK (0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHDW_SHIFT 3
-#define OMAP44XX_REG_T_RTP_SHDW_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_CKE_SHDW_MASK (0x7 << 0)
-
-/* SDRAM_TIM_3 */
-#define OMAP44XX_REG_T_CKESR_SHIFT 21
-#define OMAP44XX_REG_T_CKESR_MASK (0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHIFT 15
-#define OMAP44XX_REG_ZQ_ZQCS_MASK (0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT 13
-#define OMAP44XX_REG_T_TDQSCKMAX_MASK (0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHIFT 4
-#define OMAP44XX_REG_T_RFC_MASK (0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHIFT 0
-#define OMAP44XX_REG_T_RAS_MAX_MASK (0xf << 0)
-
-/* SDRAM_TIM_3_SHDW */
-#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT 21
-#define OMAP44XX_REG_T_CKESR_SHDW_MASK (0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT 15
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT 13
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHDW_SHIFT 4
-#define OMAP44XX_REG_T_RFC_SHDW_MASK (0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK (0xf << 0)
-
-/* LPDDR2_NVM_TIM */
-#define OMAP44XX_REG_NVM_T_XP_SHIFT 28
-#define OMAP44XX_REG_NVM_T_XP_MASK (0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHIFT 24
-#define OMAP44XX_REG_NVM_T_WTR_MASK (0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHIFT 20
-#define OMAP44XX_REG_NVM_T_RP_MASK (0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHIFT 16
-#define OMAP44XX_REG_NVM_T_WRA_MASK (0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHIFT 8
-#define OMAP44XX_REG_NVM_T_RRD_MASK (0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT 0
-#define OMAP44XX_REG_NVM_T_RCDMIN_MASK (0xff << 0)
-
-/* LPDDR2_NVM_TIM_SHDW */
-#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT 28
-#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK (0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT 24
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT 20
-#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK (0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT 16
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK (0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT 8
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK (0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT 0
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0)
-
-/* PWR_MGMT_CTRL */
-#define OMAP44XX_REG_IDLEMODE_SHIFT 30
-#define OMAP44XX_REG_IDLEMODE_MASK (0x3 << 30)
-#define OMAP44XX_REG_PD_TIM_SHIFT 12
-#define OMAP44XX_REG_PD_TIM_MASK (0xf << 12)
-#define OMAP44XX_REG_DPD_EN_SHIFT 11
-#define OMAP44XX_REG_DPD_EN_MASK (1 << 11)
-#define OMAP44XX_REG_LP_MODE_SHIFT 8
-#define OMAP44XX_REG_LP_MODE_MASK (0x7 << 8)
-#define OMAP44XX_REG_SR_TIM_SHIFT 4
-#define OMAP44XX_REG_SR_TIM_MASK (0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHIFT 0
-#define OMAP44XX_REG_CS_TIM_MASK (0xf << 0)
-
-/* PWR_MGMT_CTRL_SHDW */
-#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT 8
-#define OMAP44XX_REG_PD_TIM_SHDW_MASK (0xf << 8)
-#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT 4
-#define OMAP44XX_REG_SR_TIM_SHDW_MASK (0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT 0
-#define OMAP44XX_REG_CS_TIM_SHDW_MASK (0xf << 0)
-
-/* LPDDR2_MODE_REG_DATA */
-#define OMAP44XX_REG_VALUE_0_SHIFT 0
-#define OMAP44XX_REG_VALUE_0_MASK (0x7f << 0)
-
-/* LPDDR2_MODE_REG_CFG */
-#define OMAP44XX_REG_CS_SHIFT 31
-#define OMAP44XX_REG_CS_MASK (1 << 31)
-#define OMAP44XX_REG_REFRESH_EN_SHIFT 30
-#define OMAP44XX_REG_REFRESH_EN_MASK (1 << 30)
-#define OMAP44XX_REG_ADDRESS_SHIFT 0
-#define OMAP44XX_REG_ADDRESS_MASK (0xff << 0)
-
-/* OCP_CONFIG */
-#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24
-#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24)
-#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20
-#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20)
-#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16
-#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16)
-#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0
-#define OMAP44XX_REG_PR_OLD_COUNT_MASK (0xff << 0)
-
-/* OCP_CFG_VAL_1 */
-#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT 30
-#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK (0x3 << 30)
-#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT 28
-#define OMAP44XX_REG_LL_BUS_WIDTH_MASK (0x3 << 28)
-#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT 8
-#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK (0xff << 8)
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT 0
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK (0xff << 0)
-
-/* OCP_CFG_VAL_2 */
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT 16
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK (0xff << 16)
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT 8
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK (0xff << 8)
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT 0
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0)
-
-/* IODFT_TLGC */
-#define OMAP44XX_REG_TLEC_SHIFT 16
-#define OMAP44XX_REG_TLEC_MASK (0xffff << 16)
-#define OMAP44XX_REG_MT_SHIFT 14
-#define OMAP44XX_REG_MT_MASK (1 << 14)
-#define OMAP44XX_REG_ACT_CAP_EN_SHIFT 13
-#define OMAP44XX_REG_ACT_CAP_EN_MASK (1 << 13)
-#define OMAP44XX_REG_OPG_LD_SHIFT 12
-#define OMAP44XX_REG_OPG_LD_MASK (1 << 12)
-#define OMAP44XX_REG_RESET_PHY_SHIFT 10
-#define OMAP44XX_REG_RESET_PHY_MASK (1 << 10)
-#define OMAP44XX_REG_MMS_SHIFT 8
-#define OMAP44XX_REG_MMS_MASK (1 << 8)
-#define OMAP44XX_REG_MC_SHIFT 4
-#define OMAP44XX_REG_MC_MASK (0x3 << 4)
-#define OMAP44XX_REG_PC_SHIFT 1
-#define OMAP44XX_REG_PC_MASK (0x7 << 1)
-#define OMAP44XX_REG_TM_SHIFT 0
-#define OMAP44XX_REG_TM_MASK (1 << 0)
-
-/* IODFT_CTRL_MISR_RSLT */
-#define OMAP44XX_REG_DQM_TLMR_SHIFT 16
-#define OMAP44XX_REG_DQM_TLMR_MASK (0x3ff << 16)
-#define OMAP44XX_REG_CTL_TLMR_SHIFT 0
-#define OMAP44XX_REG_CTL_TLMR_MASK (0x7ff << 0)
-
-/* IODFT_ADDR_MISR_RSLT */
-#define OMAP44XX_REG_ADDR_TLMR_SHIFT 0
-#define OMAP44XX_REG_ADDR_TLMR_MASK (0x1fffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_1 */
-#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_2 */
-#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_3 */
-#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_66_64_MASK (0x7 << 0)
-
-/* PERF_CNT_1 */
-#define OMAP44XX_REG_COUNTER1_SHIFT 0
-#define OMAP44XX_REG_COUNTER1_MASK (0xffffffff << 0)
-
-/* PERF_CNT_2 */
-#define OMAP44XX_REG_COUNTER2_SHIFT 0
-#define OMAP44XX_REG_COUNTER2_MASK (0xffffffff << 0)
-
-/* PERF_CNT_CFG */
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT 31
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK (1 << 31)
-#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT 30
-#define OMAP44XX_REG_CNTR2_REGION_EN_MASK (1 << 30)
-#define OMAP44XX_REG_CNTR2_CFG_SHIFT 16
-#define OMAP44XX_REG_CNTR2_CFG_MASK (0xf << 16)
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT 15
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK (1 << 15)
-#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT 14
-#define OMAP44XX_REG_CNTR1_REGION_EN_MASK (1 << 14)
-#define OMAP44XX_REG_CNTR1_CFG_SHIFT 0
-#define OMAP44XX_REG_CNTR1_CFG_MASK (0xf << 0)
-
-/* PERF_CNT_SEL */
-#define OMAP44XX_REG_MCONNID2_SHIFT 24
-#define OMAP44XX_REG_MCONNID2_MASK (0xff << 24)
-#define OMAP44XX_REG_REGION_SEL2_SHIFT 16
-#define OMAP44XX_REG_REGION_SEL2_MASK (0x3 << 16)
-#define OMAP44XX_REG_MCONNID1_SHIFT 8
-#define OMAP44XX_REG_MCONNID1_MASK (0xff << 8)
-#define OMAP44XX_REG_REGION_SEL1_SHIFT 0
-#define OMAP44XX_REG_REGION_SEL1_MASK (0x3 << 0)
-
-/* PERF_CNT_TIM */
-#define OMAP44XX_REG_TOTAL_TIME_SHIFT 0
-#define OMAP44XX_REG_TOTAL_TIME_MASK (0xffffffff << 0)
-
-/* READ_IDLE_CTRL */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT 16
-#define OMAP44XX_REG_READ_IDLE_LEN_MASK (0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT 0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0)
-
-/* READ_IDLE_CTRL_SHDW */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT 16
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0)
-
-/* IRQ_EOI */
-#define OMAP44XX_REG_EOI_SHIFT 0
-#define OMAP44XX_REG_EOI_MASK (1 << 0)
-
-/* IRQSTATUS_RAW_SYS */
-#define OMAP44XX_REG_DNV_SYS_SHIFT 2
-#define OMAP44XX_REG_DNV_SYS_MASK (1 << 2)
-#define OMAP44XX_REG_TA_SYS_SHIFT 1
-#define OMAP44XX_REG_TA_SYS_MASK (1 << 1)
-#define OMAP44XX_REG_ERR_SYS_SHIFT 0
-#define OMAP44XX_REG_ERR_SYS_MASK (1 << 0)
-
-/* IRQSTATUS_RAW_LL */
-#define OMAP44XX_REG_DNV_LL_SHIFT 2
-#define OMAP44XX_REG_DNV_LL_MASK (1 << 2)
-#define OMAP44XX_REG_TA_LL_SHIFT 1
-#define OMAP44XX_REG_TA_LL_MASK (1 << 1)
-#define OMAP44XX_REG_ERR_LL_SHIFT 0
-#define OMAP44XX_REG_ERR_LL_MASK (1 << 0)
-
-/* IRQSTATUS_SYS */
-
-/* IRQSTATUS_LL */
-
-/* IRQENABLE_SET_SYS */
-#define OMAP44XX_REG_EN_DNV_SYS_SHIFT 2
-#define OMAP44XX_REG_EN_DNV_SYS_MASK (1 << 2)
-#define OMAP44XX_REG_EN_TA_SYS_SHIFT 1
-#define OMAP44XX_REG_EN_TA_SYS_MASK (1 << 1)
-#define OMAP44XX_REG_EN_ERR_SYS_SHIFT 0
-#define OMAP44XX_REG_EN_ERR_SYS_MASK (1 << 0)
-
-/* IRQENABLE_SET_LL */
-#define OMAP44XX_REG_EN_DNV_LL_SHIFT 2
-#define OMAP44XX_REG_EN_DNV_LL_MASK (1 << 2)
-#define OMAP44XX_REG_EN_TA_LL_SHIFT 1
-#define OMAP44XX_REG_EN_TA_LL_MASK (1 << 1)
-#define OMAP44XX_REG_EN_ERR_LL_SHIFT 0
-#define OMAP44XX_REG_EN_ERR_LL_MASK (1 << 0)
-
-/* IRQENABLE_CLR_SYS */
-
-/* IRQENABLE_CLR_LL */
-
-/* ZQ_CONFIG */
-#define OMAP44XX_REG_ZQ_CS1EN_SHIFT 31
-#define OMAP44XX_REG_ZQ_CS1EN_MASK (1 << 31)
-#define OMAP44XX_REG_ZQ_CS0EN_SHIFT 30
-#define OMAP44XX_REG_ZQ_CS0EN_MASK (1 << 30)
-#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT 29
-#define OMAP44XX_REG_ZQ_DUALCALEN_MASK (1 << 29)
-#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT 28
-#define OMAP44XX_REG_ZQ_SFEXITEN_MASK (1 << 28)
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT 18
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18)
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT 16
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16)
-#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT 0
-#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK (0xffff << 0)
-
-/* TEMP_ALERT_CONFIG */
-#define OMAP44XX_REG_TA_CS1EN_SHIFT 31
-#define OMAP44XX_REG_TA_CS1EN_MASK (1 << 31)
-#define OMAP44XX_REG_TA_CS0EN_SHIFT 30
-#define OMAP44XX_REG_TA_CS0EN_MASK (1 << 30)
-#define OMAP44XX_REG_TA_SFEXITEN_SHIFT 28
-#define OMAP44XX_REG_TA_SFEXITEN_MASK (1 << 28)
-#define OMAP44XX_REG_TA_DEVWDT_SHIFT 26
-#define OMAP44XX_REG_TA_DEVWDT_MASK (0x3 << 26)
-#define OMAP44XX_REG_TA_DEVCNT_SHIFT 24
-#define OMAP44XX_REG_TA_DEVCNT_MASK (0x3 << 24)
-#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT 0
-#define OMAP44XX_REG_TA_REFINTERVAL_MASK (0x3fffff << 0)
-
-/* OCP_ERR_LOG */
-#define OMAP44XX_REG_MADDRSPACE_SHIFT 14
-#define OMAP44XX_REG_MADDRSPACE_MASK (0x3 << 14)
-#define OMAP44XX_REG_MBURSTSEQ_SHIFT 11
-#define OMAP44XX_REG_MBURSTSEQ_MASK (0x7 << 11)
-#define OMAP44XX_REG_MCMD_SHIFT 8
-#define OMAP44XX_REG_MCMD_MASK (0x7 << 8)
-#define OMAP44XX_REG_MCONNID_SHIFT 0
-#define OMAP44XX_REG_MCONNID_MASK (0xff << 0)
-
-/* DDR_PHY_CTRL_1 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT 4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHIFT 0
-#define OMAP44XX_REG_READ_LATENCY_MASK (0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_1_SHDW */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT 0
-#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK (0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_2 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT 0
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
-
-/* DMM */
-#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040
-
-/* Memory Adapter (4460 onwards) */
-#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040
-
-/* DMM_LISA_MAP */
-#define OMAP44XX_SYS_ADDR_SHIFT 24
-#define OMAP44XX_SYS_ADDR_MASK (0xff << 24)
-#define OMAP44XX_SYS_SIZE_SHIFT 20
-#define OMAP44XX_SYS_SIZE_MASK (0x7 << 20)
-#define OMAP44XX_SDRC_INTL_SHIFT 18
-#define OMAP44XX_SDRC_INTL_MASK (0x3 << 18)
-#define OMAP44XX_SDRC_ADDRSPC_SHIFT 16
-#define OMAP44XX_SDRC_ADDRSPC_MASK (0x3 << 16)
-#define OMAP44XX_SDRC_MAP_SHIFT 8
-#define OMAP44XX_SDRC_MAP_MASK (0x3 << 8)
-#define OMAP44XX_SDRC_ADDR_SHIFT 0
-#define OMAP44XX_SDRC_ADDR_MASK (0xff << 0)
-
-/* DMM_LISA_MAP fields */
-#define DMM_SDRC_MAP_UNMAPPED 0
-#define DMM_SDRC_MAP_EMIF1_ONLY 1
-#define DMM_SDRC_MAP_EMIF2_ONLY 2
-#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3
-
-#define DMM_SDRC_INTL_NONE 0
-#define DMM_SDRC_INTL_128B 1
-#define DMM_SDRC_INTL_256B 2
-#define DMM_SDRC_INTL_512 3
-
-#define DMM_SDRC_ADDR_SPC_SDRAM 0
-#define DMM_SDRC_ADDR_SPC_NVM 1
-#define DMM_SDRC_ADDR_SPC_INVALID 2
-
-#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\
- (DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\
- (CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT))
-
-#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-/* Trap for invalid TILER PAT entries */
-#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\
- (0 << OMAP44XX_SDRC_ADDR_SHIFT) |\
- (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\
- (0xFF << OMAP44XX_SYS_ADDR_SHIFT))
-
-
-/* Reg mapping structure */
-struct emif_reg_struct {
- u32 emif_mod_id_rev;
- u32 emif_status;
- u32 emif_sdram_config;
- u32 emif_lpddr2_nvm_config;
- u32 emif_sdram_ref_ctrl;
- u32 emif_sdram_ref_ctrl_shdw;
- u32 emif_sdram_tim_1;
- u32 emif_sdram_tim_1_shdw;
- u32 emif_sdram_tim_2;
- u32 emif_sdram_tim_2_shdw;
- u32 emif_sdram_tim_3;
- u32 emif_sdram_tim_3_shdw;
- u32 emif_lpddr2_nvm_tim;
- u32 emif_lpddr2_nvm_tim_shdw;
- u32 emif_pwr_mgmt_ctrl;
- u32 emif_pwr_mgmt_ctrl_shdw;
- u32 emif_lpddr2_mode_reg_data;
- u32 padding1[1];
- u32 emif_lpddr2_mode_reg_data_es2;
- u32 padding11[1];
- u32 emif_lpddr2_mode_reg_cfg;
- u32 emif_l3_config;
- u32 emif_l3_cfg_val_1;
- u32 emif_l3_cfg_val_2;
- u32 emif_iodft_tlgc;
- u32 padding2[7];
- u32 emif_perf_cnt_1;
- u32 emif_perf_cnt_2;
- u32 emif_perf_cnt_cfg;
- u32 emif_perf_cnt_sel;
- u32 emif_perf_cnt_tim;
- u32 padding3;
- u32 emif_read_idlectrl;
- u32 emif_read_idlectrl_shdw;
- u32 padding4;
- u32 emif_irqstatus_raw_sys;
- u32 emif_irqstatus_raw_ll;
- u32 emif_irqstatus_sys;
- u32 emif_irqstatus_ll;
- u32 emif_irqenable_set_sys;
- u32 emif_irqenable_set_ll;
- u32 emif_irqenable_clr_sys;
- u32 emif_irqenable_clr_ll;
- u32 padding5;
- u32 emif_zq_config;
- u32 emif_temp_alert_config;
- u32 emif_l3_err_log;
- u32 padding6[4];
- u32 emif_ddr_phy_ctrl_1;
- u32 emif_ddr_phy_ctrl_1_shdw;
- u32 emif_ddr_phy_ctrl_2;
-};
-
-struct dmm_lisa_map_regs {
- u32 dmm_lisa_map_0;
- u32 dmm_lisa_map_1;
- u32 dmm_lisa_map_2;
- u32 dmm_lisa_map_3;
-};
-
-#define CS0 0
-#define CS1 1
-/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
-#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */
-
-/*
- * The period of DDR clk is represented as numerator and denominator for
- * better accuracy in integer based calculations. However, if the numerator
- * and denominator are very huge there may be chances of overflow in
- * calculations. So, as a trade-off keep denominator(and consequently
- * numerator) within a limit sacrificing some accuracy - but not much
- * If denominator and numerator are already small (such as at 400 MHz)
- * no adjustment is needed
- */
-#define EMIF_PERIOD_DEN_LIMIT 1000
-/*
- * Maximum number of different frequencies supported by EMIF driver
- * Determines the number of entries in the pointer array for register
- * cache
- */
-#define EMIF_MAX_NUM_FREQUENCIES 6
-/*
- * Indices into the Addressing Table array.
- * One entry each for all the different types of devices with different
- * addressing schemes
- */
-#define ADDR_TABLE_INDEX64M 0
-#define ADDR_TABLE_INDEX128M 1
-#define ADDR_TABLE_INDEX256M 2
-#define ADDR_TABLE_INDEX512M 3
-#define ADDR_TABLE_INDEX1GS4 4
-#define ADDR_TABLE_INDEX2GS4 5
-#define ADDR_TABLE_INDEX4G 6
-#define ADDR_TABLE_INDEX8G 7
-#define ADDR_TABLE_INDEX1GS2 8
-#define ADDR_TABLE_INDEX2GS2 9
-#define ADDR_TABLE_INDEXMAX 10
-
-/* Number of Row bits */
-#define ROW_9 0
-#define ROW_10 1
-#define ROW_11 2
-#define ROW_12 3
-#define ROW_13 4
-#define ROW_14 5
-#define ROW_15 6
-#define ROW_16 7
-
-/* Number of Column bits */
-#define COL_8 0
-#define COL_9 1
-#define COL_10 2
-#define COL_11 3
-#define COL_7 4 /*Not supported by OMAP included for completeness */
-
-/* Number of Banks*/
-#define BANKS1 0
-#define BANKS2 1
-#define BANKS4 2
-#define BANKS8 3
-
-/* Refresh rate in micro seconds x 10 */
-#define T_REFI_15_6 156
-#define T_REFI_7_8 78
-#define T_REFI_3_9 39
-
-#define EBANK_CS1_DIS 0
-#define EBANK_CS1_EN 1
-
-/* Read Latency used by the device at reset */
-#define RL_BOOT 3
-/* Read Latency for the highest frequency you want to use */
-#define RL_FINAL 6
-
-/* Interleaving policies at EMIF level- between banks and Chip Selects */
-#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0
-#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3
-
-/*
- * Interleaving policy to be used
- * Currently set to MAX interleaving for better performance
- */
-#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
-
-/* State of the core voltage:
- * This is important for some parameters such as read idle control and
- * ZQ calibration timings. Timings are much stricter when voltage ramp
- * is happening compared to when the voltage is stable.
- * We need to calculate two sets of values for these parameters and use
- * them accordingly
- */
-#define LPDDR2_VOLTAGE_STABLE 0
-#define LPDDR2_VOLTAGE_RAMPING 1
-
-/* Length of the forced read idle period in terms of cycles */
-#define EMIF_REG_READ_IDLE_LEN_VAL 5
-
-/* Interval between forced 'read idles' */
-/* To be used when voltage is changed for DPS/DVFS - 1us */
-#define READ_IDLE_INTERVAL_DVFS (1*1000)
-/*
- * To be used when voltage is not scaled except by Smart Reflex
- * 50us - or maximum value will do
- */
-#define READ_IDLE_INTERVAL_NORMAL (50*1000)
-
-
-/*
- * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
- * be enough. This shoule be enough also in the case when voltage is changing
- * due to smart-reflex.
- */
-#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000)
-/*
- * If voltage is changing due to DVFS ZQCS should be performed more
- * often(every 50us)
- */
-#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50
-
-/* The interval between ZQCL commands as a multiple of ZQCS interval */
-#define REG_ZQ_ZQCL_MULT 4
-/* The interval between ZQINIT commands as a multiple of ZQCL interval */
-#define REG_ZQ_ZQINIT_MULT 3
-/* Enable ZQ Calibration on exiting Self-refresh */
-#define REG_ZQ_SFEXITEN_ENABLE 1
-/*
- * ZQ Calibration simultaneously on both chip-selects:
- * Needs one calibration resistor per CS
- * None of the boards that we know of have this capability
- * So disabled by default
- */
-#define REG_ZQ_DUALCALEN_DISABLE 0
-/*
- * Enable ZQ Calibration by default on CS0. If we are asked to program
- * the EMIF there will be something connected to CS0 for sure
- */
-#define REG_ZQ_CS0EN_ENABLE 1
-
-/* EMIF_PWR_MGMT_CTRL register */
-/* Low power modes */
-#define LP_MODE_DISABLE 0
-#define LP_MODE_CLOCK_STOP 1
-#define LP_MODE_SELF_REFRESH 2
-#define LP_MODE_PWR_DN 3
-
-/* REG_DPD_EN */
-#define DPD_DISABLE 0
-#define DPD_ENABLE 1
-
-/* Maximum delay before Low Power Modes */
-#define REG_CS_TIM 0xF
-#define REG_SR_TIM 0xF
-#define REG_PD_TIM 0xF
-
-/* EMIF_PWR_MGMT_CTRL register */
-#define EMIF_PWR_MGMT_CTRL (\
- ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\
- ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
- ((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\
- & OMAP44XX_REG_LP_MODE_MASK) |\
- ((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\
- & OMAP44XX_REG_DPD_EN_MASK))\
-
-#define EMIF_PWR_MGMT_CTRL_SHDW (\
- ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_CS_TIM_SHDW_MASK) |\
- ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_SR_TIM_SHDW_MASK) |\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_PD_TIM_SHDW_MASK) |\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_PD_TIM_SHDW_MASK))
-
-/* EMIF_L3_CONFIG register value */
-#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
-#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
-/*
- * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
- * All these fields have magic values dependent on frequency and
- * determined by PHY and DLL integration with EMIF. Setting the magic
- * values suggested by hw team.
- */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF
-#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41
-#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80
-#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF
-
-/*
-* MR1 value:
-* Burst length : 8
-* Burst type : sequential
-* Wrap : enabled
-* nWR : 3(default). EMIF does not do pre-charge.
-* : So nWR is don't care
-*/
-#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23
-
-/* MR2 */
-#define MR2_RL3_WL1 1
-#define MR2_RL4_WL2 2
-#define MR2_RL5_WL2 3
-#define MR2_RL6_WL3 4
-
-/* MR10: ZQ calibration codes */
-#define MR10_ZQ_ZQCS 0x56
-#define MR10_ZQ_ZQCL 0xAB
-#define MR10_ZQ_ZQINIT 0xFF
-#define MR10_ZQ_ZQRESET 0xC3
-
-/* TEMP_ALERT_CONFIG */
-#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */
-#define TEMP_ALERT_CONFIG_DEVCT_1 0
-#define TEMP_ALERT_CONFIG_DEVWDT_32 2
-
-/* MR16 value: refresh full array(no partial array self refresh) */
-#define MR16_REF_FULL_ARRAY 0
-
-/*
- * Maximum number of entries we keep in our array of timing tables
- * We need not keep all the speed bins supported by the device
- * We need to keep timing tables for only the speed bins that we
- * are interested in
- */
-#define MAX_NUM_SPEEDBINS 4
-
-/* LPDDR2 Densities */
-#define LPDDR2_DENSITY_64Mb 0
-#define LPDDR2_DENSITY_128Mb 1
-#define LPDDR2_DENSITY_256Mb 2
-#define LPDDR2_DENSITY_512Mb 3
-#define LPDDR2_DENSITY_1Gb 4
-#define LPDDR2_DENSITY_2Gb 5
-#define LPDDR2_DENSITY_4Gb 6
-#define LPDDR2_DENSITY_8Gb 7
-#define LPDDR2_DENSITY_16Gb 8
-#define LPDDR2_DENSITY_32Gb 9
-
-/* LPDDR2 type */
-#define LPDDR2_TYPE_S4 0
-#define LPDDR2_TYPE_S2 1
-#define LPDDR2_TYPE_NVM 2
-
-/* LPDDR2 IO width */
-#define LPDDR2_IO_WIDTH_32 0
-#define LPDDR2_IO_WIDTH_16 1
-#define LPDDR2_IO_WIDTH_8 2
-
-/* Mode register numbers */
-#define LPDDR2_MR0 0
-#define LPDDR2_MR1 1
-#define LPDDR2_MR2 2
-#define LPDDR2_MR3 3
-#define LPDDR2_MR4 4
-#define LPDDR2_MR5 5
-#define LPDDR2_MR6 6
-#define LPDDR2_MR7 7
-#define LPDDR2_MR8 8
-#define LPDDR2_MR9 9
-#define LPDDR2_MR10 10
-#define LPDDR2_MR11 11
-#define LPDDR2_MR16 16
-#define LPDDR2_MR17 17
-#define LPDDR2_MR18 18
-
-/* MR0 */
-#define LPDDR2_MR0_DAI_SHIFT 0
-#define LPDDR2_MR0_DAI_MASK 1
-#define LPDDR2_MR0_DI_SHIFT 1
-#define LPDDR2_MR0_DI_MASK (1 << 1)
-#define LPDDR2_MR0_DNVI_SHIFT 2
-#define LPDDR2_MR0_DNVI_MASK (1 << 2)
-
-/* MR4 */
-#define MR4_SDRAM_REF_RATE_SHIFT 0
-#define MR4_SDRAM_REF_RATE_MASK 7
-#define MR4_TUF_SHIFT 7
-#define MR4_TUF_MASK (1 << 7)
-
-/* MR4 SDRAM Refresh Rate field values */
-#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0
-#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1
-#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2
-#define SDRAM_TEMP_NOMINAL 0x3
-#define SDRAM_TEMP_RESERVED_4 0x4
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6
-#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7
-
-#define LPDDR2_MANUFACTURER_SAMSUNG 1
-#define LPDDR2_MANUFACTURER_QIMONDA 2
-#define LPDDR2_MANUFACTURER_ELPIDA 3
-#define LPDDR2_MANUFACTURER_ETRON 4
-#define LPDDR2_MANUFACTURER_NANYA 5
-#define LPDDR2_MANUFACTURER_HYNIX 6
-#define LPDDR2_MANUFACTURER_MOSEL 7
-#define LPDDR2_MANUFACTURER_WINBOND 8
-#define LPDDR2_MANUFACTURER_ESMT 9
-#define LPDDR2_MANUFACTURER_SPANSION 11
-#define LPDDR2_MANUFACTURER_SST 12
-#define LPDDR2_MANUFACTURER_ZMOS 13
-#define LPDDR2_MANUFACTURER_INTEL 14
-#define LPDDR2_MANUFACTURER_NUMONYX 254
-#define LPDDR2_MANUFACTURER_MICRON 255
-
-/* MR8 register fields */
-#define MR8_TYPE_SHIFT 0x0
-#define MR8_TYPE_MASK 0x3
-#define MR8_DENSITY_SHIFT 0x2
-#define MR8_DENSITY_MASK (0xF << 0x2)
-#define MR8_IO_WIDTH_SHIFT 0x6
-#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
-
-struct lpddr2_addressing {
- u8 num_banks;
- u8 t_REFI_us_x10;
- u8 row_sz[2]; /* One entry each for x32 and x16 */
- u8 col_sz[2]; /* One entry each for x32 and x16 */
-};
-
-/* Structure for timings from the DDR datasheet */
-struct lpddr2_ac_timings {
- u32 max_freq;
- u8 RL;
- u8 tRPab;
- u8 tRCD;
- u8 tWR;
- u8 tRASmin;
- u8 tRRD;
- u8 tWTRx2;
- u8 tXSR;
- u8 tXPx2;
- u8 tRFCab;
- u8 tRTPx2;
- u8 tCKE;
- u8 tCKESR;
- u8 tZQCS;
- u32 tZQCL;
- u32 tZQINIT;
- u8 tDQSCKMAXx2;
- u8 tRASmax;
- u8 tFAW;
-
-};
-
-/*
- * Min tCK values for some of the parameters:
- * If the calculated clock cycles for the respective parameter is
- * less than the corresponding min tCK value, we need to set the min
- * tCK value. This may happen at lower frequencies.
- */
-struct lpddr2_min_tck {
- u32 tRL;
- u32 tRP_AB;
- u32 tRCD;
- u32 tWR;
- u32 tRAS_MIN;
- u32 tRRD;
- u32 tWTR;
- u32 tXP;
- u32 tRTP;
- u8 tCKE;
- u32 tCKESR;
- u32 tFAW;
-};
-
-struct lpddr2_device_details {
- u8 type;
- u8 density;
- u8 io_width;
- u8 manufacturer;
-};
-
-struct lpddr2_device_timings {
- const struct lpddr2_ac_timings **ac_timings;
- const struct lpddr2_min_tck *min_tck;
-};
-
-/* Details of the devices connected to each chip-select of an EMIF instance */
-struct emif_device_details {
- const struct lpddr2_device_details *cs0_device_details;
- const struct lpddr2_device_details *cs1_device_details;
- const struct lpddr2_device_timings *cs0_device_timings;
- const struct lpddr2_device_timings *cs1_device_timings;
-};
-
-/*
- * Structure containing shadow of important registers in EMIF
- * The calculation function fills in this structure to be later used for
- * initialization and DVFS
- */
-struct emif_regs {
- u32 freq;
- u32 sdram_config_init;
- u32 sdram_config;
- u32 ref_ctrl;
- u32 sdram_tim1;
- u32 sdram_tim2;
- u32 sdram_tim3;
- u32 read_idle_ctrl;
- u32 zq_config;
- u32 temp_alert_config;
- u32 emif_ddr_phy_ctlr_1_init;
- u32 emif_ddr_phy_ctlr_1;
-};
-
-/* assert macros */
-#if defined(DEBUG)
-#define emif_assert(c) ({ if (!(c)) for (;;); })
-#else
-#define emif_assert(c) ({ if (0) hang(); })
-#endif
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
-#else
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details);
-void emif_get_device_timings(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings);
-#endif
-
-#endif
--- /dev/null
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <common.h>
+
+/* Base address */
+#define EMIF1_BASE 0x4c000000
+#define EMIF2_BASE 0x4d000000
+
+/* Registers shifts and masks */
+
+/* EMIF_MOD_ID_REV */
+#define EMIF_REG_SCHEME_SHIFT 30
+#define EMIF_REG_SCHEME_MASK (0x3 << 30)
+#define EMIF_REG_MODULE_ID_SHIFT 16
+#define EMIF_REG_MODULE_ID_MASK (0xfff << 16)
+#define EMIF_REG_RTL_VERSION_SHIFT 11
+#define EMIF_REG_RTL_VERSION_MASK (0x1f << 11)
+#define EMIF_REG_MAJOR_REVISION_SHIFT 8
+#define EMIF_REG_MAJOR_REVISION_MASK (0x7 << 8)
+#define EMIF_REG_MINOR_REVISION_SHIFT 0
+#define EMIF_REG_MINOR_REVISION_MASK (0x3f << 0)
+
+/* STATUS */
+#define EMIF_REG_BE_SHIFT 31
+#define EMIF_REG_BE_MASK (1 << 31)
+#define EMIF_REG_DUAL_CLK_MODE_SHIFT 30
+#define EMIF_REG_DUAL_CLK_MODE_MASK (1 << 30)
+#define EMIF_REG_FAST_INIT_SHIFT 29
+#define EMIF_REG_FAST_INIT_MASK (1 << 29)
+#define EMIF_REG_PHY_DLL_READY_SHIFT 2
+#define EMIF_REG_PHY_DLL_READY_MASK (1 << 2)
+
+/* SDRAM_CONFIG */
+#define EMIF_REG_SDRAM_TYPE_SHIFT 29
+#define EMIF_REG_SDRAM_TYPE_MASK (0x7 << 29)
+#define EMIF_REG_IBANK_POS_SHIFT 27
+#define EMIF_REG_IBANK_POS_MASK (0x3 << 27)
+#define EMIF_REG_DDR_TERM_SHIFT 24
+#define EMIF_REG_DDR_TERM_MASK (0x7 << 24)
+#define EMIF_REG_DDR2_DDQS_SHIFT 23
+#define EMIF_REG_DDR2_DDQS_MASK (1 << 23)
+#define EMIF_REG_DYN_ODT_SHIFT 21
+#define EMIF_REG_DYN_ODT_MASK (0x3 << 21)
+#define EMIF_REG_DDR_DISABLE_DLL_SHIFT 20
+#define EMIF_REG_DDR_DISABLE_DLL_MASK (1 << 20)
+#define EMIF_REG_SDRAM_DRIVE_SHIFT 18
+#define EMIF_REG_SDRAM_DRIVE_MASK (0x3 << 18)
+#define EMIF_REG_CWL_SHIFT 16
+#define EMIF_REG_CWL_MASK (0x3 << 16)
+#define EMIF_REG_NARROW_MODE_SHIFT 14
+#define EMIF_REG_NARROW_MODE_MASK (0x3 << 14)
+#define EMIF_REG_CL_SHIFT 10
+#define EMIF_REG_CL_MASK (0xf << 10)
+#define EMIF_REG_ROWSIZE_SHIFT 7
+#define EMIF_REG_ROWSIZE_MASK (0x7 << 7)
+#define EMIF_REG_IBANK_SHIFT 4
+#define EMIF_REG_IBANK_MASK (0x7 << 4)
+#define EMIF_REG_EBANK_SHIFT 3
+#define EMIF_REG_EBANK_MASK (1 << 3)
+#define EMIF_REG_PAGESIZE_SHIFT 0
+#define EMIF_REG_PAGESIZE_MASK (0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define EMIF_REG_CS1NVMEN_SHIFT 30
+#define EMIF_REG_CS1NVMEN_MASK (1 << 30)
+#define EMIF_REG_EBANK_POS_SHIFT 27
+#define EMIF_REG_EBANK_POS_MASK (1 << 27)
+#define EMIF_REG_RDBNUM_SHIFT 4
+#define EMIF_REG_RDBNUM_MASK (0x3 << 4)
+#define EMIF_REG_RDBSIZE_SHIFT 0
+#define EMIF_REG_RDBSIZE_MASK (0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define EMIF_REG_INITREF_DIS_SHIFT 31
+#define EMIF_REG_INITREF_DIS_MASK (1 << 31)
+#define EMIF_REG_SRT_SHIFT 29
+#define EMIF_REG_SRT_MASK (1 << 29)
+#define EMIF_REG_ASR_SHIFT 28
+#define EMIF_REG_ASR_MASK (1 << 28)
+#define EMIF_REG_PASR_SHIFT 24
+#define EMIF_REG_PASR_MASK (0x7 << 24)
+#define EMIF_REG_REFRESH_RATE_SHIFT 0
+#define EMIF_REG_REFRESH_RATE_MASK (0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT 0
+#define EMIF_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define EMIF_REG_T_RP_SHIFT 25
+#define EMIF_REG_T_RP_MASK (0xf << 25)
+#define EMIF_REG_T_RCD_SHIFT 21
+#define EMIF_REG_T_RCD_MASK (0xf << 21)
+#define EMIF_REG_T_WR_SHIFT 17
+#define EMIF_REG_T_WR_MASK (0xf << 17)
+#define EMIF_REG_T_RAS_SHIFT 12
+#define EMIF_REG_T_RAS_MASK (0x1f << 12)
+#define EMIF_REG_T_RC_SHIFT 6
+#define EMIF_REG_T_RC_MASK (0x3f << 6)
+#define EMIF_REG_T_RRD_SHIFT 3
+#define EMIF_REG_T_RRD_MASK (0x7 << 3)
+#define EMIF_REG_T_WTR_SHIFT 0
+#define EMIF_REG_T_WTR_MASK (0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define EMIF_REG_T_RP_SHDW_SHIFT 25
+#define EMIF_REG_T_RP_SHDW_MASK (0xf << 25)
+#define EMIF_REG_T_RCD_SHDW_SHIFT 21
+#define EMIF_REG_T_RCD_SHDW_MASK (0xf << 21)
+#define EMIF_REG_T_WR_SHDW_SHIFT 17
+#define EMIF_REG_T_WR_SHDW_MASK (0xf << 17)
+#define EMIF_REG_T_RAS_SHDW_SHIFT 12
+#define EMIF_REG_T_RAS_SHDW_MASK (0x1f << 12)
+#define EMIF_REG_T_RC_SHDW_SHIFT 6
+#define EMIF_REG_T_RC_SHDW_MASK (0x3f << 6)
+#define EMIF_REG_T_RRD_SHDW_SHIFT 3
+#define EMIF_REG_T_RRD_SHDW_MASK (0x7 << 3)
+#define EMIF_REG_T_WTR_SHDW_SHIFT 0
+#define EMIF_REG_T_WTR_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define EMIF_REG_T_XP_SHIFT 28
+#define EMIF_REG_T_XP_MASK (0x7 << 28)
+#define EMIF_REG_T_ODT_SHIFT 25
+#define EMIF_REG_T_ODT_MASK (0x7 << 25)
+#define EMIF_REG_T_XSNR_SHIFT 16
+#define EMIF_REG_T_XSNR_MASK (0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHIFT 6
+#define EMIF_REG_T_XSRD_MASK (0x3ff << 6)
+#define EMIF_REG_T_RTP_SHIFT 3
+#define EMIF_REG_T_RTP_MASK (0x7 << 3)
+#define EMIF_REG_T_CKE_SHIFT 0
+#define EMIF_REG_T_CKE_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define EMIF_REG_T_XP_SHDW_SHIFT 28
+#define EMIF_REG_T_XP_SHDW_MASK (0x7 << 28)
+#define EMIF_REG_T_ODT_SHDW_SHIFT 25
+#define EMIF_REG_T_ODT_SHDW_MASK (0x7 << 25)
+#define EMIF_REG_T_XSNR_SHDW_SHIFT 16
+#define EMIF_REG_T_XSNR_SHDW_MASK (0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHDW_SHIFT 6
+#define EMIF_REG_T_XSRD_SHDW_MASK (0x3ff << 6)
+#define EMIF_REG_T_RTP_SHDW_SHIFT 3
+#define EMIF_REG_T_RTP_SHDW_MASK (0x7 << 3)
+#define EMIF_REG_T_CKE_SHDW_SHIFT 0
+#define EMIF_REG_T_CKE_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define EMIF_REG_T_CKESR_SHIFT 21
+#define EMIF_REG_T_CKESR_MASK (0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHIFT 15
+#define EMIF_REG_ZQ_ZQCS_MASK (0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHIFT 13
+#define EMIF_REG_T_TDQSCKMAX_MASK (0x3 << 13)
+#define EMIF_REG_T_RFC_SHIFT 4
+#define EMIF_REG_T_RFC_MASK (0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHIFT 0
+#define EMIF_REG_T_RAS_MAX_MASK (0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define EMIF_REG_T_CKESR_SHDW_SHIFT 21
+#define EMIF_REG_T_CKESR_SHDW_MASK (0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT 15
+#define EMIF_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT 13
+#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13)
+#define EMIF_REG_T_RFC_SHDW_SHIFT 4
+#define EMIF_REG_T_RFC_SHDW_MASK (0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT 0
+#define EMIF_REG_T_RAS_MAX_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define EMIF_REG_NVM_T_XP_SHIFT 28
+#define EMIF_REG_NVM_T_XP_MASK (0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHIFT 24
+#define EMIF_REG_NVM_T_WTR_MASK (0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHIFT 20
+#define EMIF_REG_NVM_T_RP_MASK (0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHIFT 16
+#define EMIF_REG_NVM_T_WRA_MASK (0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHIFT 8
+#define EMIF_REG_NVM_T_RRD_MASK (0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHIFT 0
+#define EMIF_REG_NVM_T_RCDMIN_MASK (0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define EMIF_REG_NVM_T_XP_SHDW_SHIFT 28
+#define EMIF_REG_NVM_T_XP_SHDW_MASK (0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT 24
+#define EMIF_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHDW_SHIFT 20
+#define EMIF_REG_NVM_T_RP_SHDW_MASK (0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT 16
+#define EMIF_REG_NVM_T_WRA_SHDW_MASK (0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT 8
+#define EMIF_REG_NVM_T_RRD_SHDW_MASK (0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT 0
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define EMIF_REG_IDLEMODE_SHIFT 30
+#define EMIF_REG_IDLEMODE_MASK (0x3 << 30)
+#define EMIF_REG_PD_TIM_SHIFT 12
+#define EMIF_REG_PD_TIM_MASK (0xf << 12)
+#define EMIF_REG_DPD_EN_SHIFT 11
+#define EMIF_REG_DPD_EN_MASK (1 << 11)
+#define EMIF_REG_LP_MODE_SHIFT 8
+#define EMIF_REG_LP_MODE_MASK (0x7 << 8)
+#define EMIF_REG_SR_TIM_SHIFT 4
+#define EMIF_REG_SR_TIM_MASK (0xf << 4)
+#define EMIF_REG_CS_TIM_SHIFT 0
+#define EMIF_REG_CS_TIM_MASK (0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define EMIF_REG_PD_TIM_SHDW_SHIFT 8
+#define EMIF_REG_PD_TIM_SHDW_MASK (0xf << 8)
+#define EMIF_REG_SR_TIM_SHDW_SHIFT 4
+#define EMIF_REG_SR_TIM_SHDW_MASK (0xf << 4)
+#define EMIF_REG_CS_TIM_SHDW_SHIFT 0
+#define EMIF_REG_CS_TIM_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define EMIF_REG_VALUE_0_SHIFT 0
+#define EMIF_REG_VALUE_0_MASK (0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define EMIF_REG_CS_SHIFT 31
+#define EMIF_REG_CS_MASK (1 << 31)
+#define EMIF_REG_REFRESH_EN_SHIFT 30
+#define EMIF_REG_REFRESH_EN_MASK (1 << 30)
+#define EMIF_REG_ADDRESS_SHIFT 0
+#define EMIF_REG_ADDRESS_MASK (0xff << 0)
+
+/* OCP_CONFIG */
+#define EMIF_REG_SYS_THRESH_MAX_SHIFT 24
+#define EMIF_REG_SYS_THRESH_MAX_MASK (0xf << 24)
+#define EMIF_REG_MPU_THRESH_MAX_SHIFT 20
+#define EMIF_REG_MPU_THRESH_MAX_MASK (0xf << 20)
+#define EMIF_REG_LL_THRESH_MAX_SHIFT 16
+#define EMIF_REG_LL_THRESH_MAX_MASK (0xf << 16)
+#define EMIF_REG_PR_OLD_COUNT_SHIFT 0
+#define EMIF_REG_PR_OLD_COUNT_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define EMIF_REG_SYS_BUS_WIDTH_SHIFT 30
+#define EMIF_REG_SYS_BUS_WIDTH_MASK (0x3 << 30)
+#define EMIF_REG_LL_BUS_WIDTH_SHIFT 28
+#define EMIF_REG_LL_BUS_WIDTH_MASK (0x3 << 28)
+#define EMIF_REG_WR_FIFO_DEPTH_SHIFT 8
+#define EMIF_REG_WR_FIFO_DEPTH_MASK (0xff << 8)
+#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT 0
+#define EMIF_REG_CMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT 16
+#define EMIF_REG_RREG_FIFO_DEPTH_MASK (0xff << 16)
+#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT 8
+#define EMIF_REG_RSD_FIFO_DEPTH_MASK (0xff << 8)
+#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT 0
+#define EMIF_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* IODFT_TLGC */
+#define EMIF_REG_TLEC_SHIFT 16
+#define EMIF_REG_TLEC_MASK (0xffff << 16)
+#define EMIF_REG_MT_SHIFT 14
+#define EMIF_REG_MT_MASK (1 << 14)
+#define EMIF_REG_ACT_CAP_EN_SHIFT 13
+#define EMIF_REG_ACT_CAP_EN_MASK (1 << 13)
+#define EMIF_REG_OPG_LD_SHIFT 12
+#define EMIF_REG_OPG_LD_MASK (1 << 12)
+#define EMIF_REG_RESET_PHY_SHIFT 10
+#define EMIF_REG_RESET_PHY_MASK (1 << 10)
+#define EMIF_REG_MMS_SHIFT 8
+#define EMIF_REG_MMS_MASK (1 << 8)
+#define EMIF_REG_MC_SHIFT 4
+#define EMIF_REG_MC_MASK (0x3 << 4)
+#define EMIF_REG_PC_SHIFT 1
+#define EMIF_REG_PC_MASK (0x7 << 1)
+#define EMIF_REG_TM_SHIFT 0
+#define EMIF_REG_TM_MASK (1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define EMIF_REG_DQM_TLMR_SHIFT 16
+#define EMIF_REG_DQM_TLMR_MASK (0x3ff << 16)
+#define EMIF_REG_CTL_TLMR_SHIFT 0
+#define EMIF_REG_CTL_TLMR_MASK (0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define EMIF_REG_ADDR_TLMR_SHIFT 0
+#define EMIF_REG_ADDR_TLMR_MASK (0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define EMIF_REG_DATA_TLMR_31_0_SHIFT 0
+#define EMIF_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define EMIF_REG_DATA_TLMR_63_32_SHIFT 0
+#define EMIF_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define EMIF_REG_DATA_TLMR_66_64_SHIFT 0
+#define EMIF_REG_DATA_TLMR_66_64_MASK (0x7 << 0)
+
+/* PERF_CNT_1 */
+#define EMIF_REG_COUNTER1_SHIFT 0
+#define EMIF_REG_COUNTER1_MASK (0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define EMIF_REG_COUNTER2_SHIFT 0
+#define EMIF_REG_COUNTER2_MASK (0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT 31
+#define EMIF_REG_CNTR2_MCONNID_EN_MASK (1 << 31)
+#define EMIF_REG_CNTR2_REGION_EN_SHIFT 30
+#define EMIF_REG_CNTR2_REGION_EN_MASK (1 << 30)
+#define EMIF_REG_CNTR2_CFG_SHIFT 16
+#define EMIF_REG_CNTR2_CFG_MASK (0xf << 16)
+#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT 15
+#define EMIF_REG_CNTR1_MCONNID_EN_MASK (1 << 15)
+#define EMIF_REG_CNTR1_REGION_EN_SHIFT 14
+#define EMIF_REG_CNTR1_REGION_EN_MASK (1 << 14)
+#define EMIF_REG_CNTR1_CFG_SHIFT 0
+#define EMIF_REG_CNTR1_CFG_MASK (0xf << 0)
+
+/* PERF_CNT_SEL */
+#define EMIF_REG_MCONNID2_SHIFT 24
+#define EMIF_REG_MCONNID2_MASK (0xff << 24)
+#define EMIF_REG_REGION_SEL2_SHIFT 16
+#define EMIF_REG_REGION_SEL2_MASK (0x3 << 16)
+#define EMIF_REG_MCONNID1_SHIFT 8
+#define EMIF_REG_MCONNID1_MASK (0xff << 8)
+#define EMIF_REG_REGION_SEL1_SHIFT 0
+#define EMIF_REG_REGION_SEL1_MASK (0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define EMIF_REG_TOTAL_TIME_SHIFT 0
+#define EMIF_REG_TOTAL_TIME_MASK (0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define EMIF_REG_READ_IDLE_LEN_SHIFT 16
+#define EMIF_REG_READ_IDLE_LEN_MASK (0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT 0
+#define EMIF_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT 16
+#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0)
+
+/* IRQ_EOI */
+#define EMIF_REG_EOI_SHIFT 0
+#define EMIF_REG_EOI_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define EMIF_REG_DNV_SYS_SHIFT 2
+#define EMIF_REG_DNV_SYS_MASK (1 << 2)
+#define EMIF_REG_TA_SYS_SHIFT 1
+#define EMIF_REG_TA_SYS_MASK (1 << 1)
+#define EMIF_REG_ERR_SYS_SHIFT 0
+#define EMIF_REG_ERR_SYS_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define EMIF_REG_DNV_LL_SHIFT 2
+#define EMIF_REG_DNV_LL_MASK (1 << 2)
+#define EMIF_REG_TA_LL_SHIFT 1
+#define EMIF_REG_TA_LL_MASK (1 << 1)
+#define EMIF_REG_ERR_LL_SHIFT 0
+#define EMIF_REG_ERR_LL_MASK (1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define EMIF_REG_EN_DNV_SYS_SHIFT 2
+#define EMIF_REG_EN_DNV_SYS_MASK (1 << 2)
+#define EMIF_REG_EN_TA_SYS_SHIFT 1
+#define EMIF_REG_EN_TA_SYS_MASK (1 << 1)
+#define EMIF_REG_EN_ERR_SYS_SHIFT 0
+#define EMIF_REG_EN_ERR_SYS_MASK (1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define EMIF_REG_EN_DNV_LL_SHIFT 2
+#define EMIF_REG_EN_DNV_LL_MASK (1 << 2)
+#define EMIF_REG_EN_TA_LL_SHIFT 1
+#define EMIF_REG_EN_TA_LL_MASK (1 << 1)
+#define EMIF_REG_EN_ERR_LL_SHIFT 0
+#define EMIF_REG_EN_ERR_LL_MASK (1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define EMIF_REG_ZQ_CS1EN_SHIFT 31
+#define EMIF_REG_ZQ_CS1EN_MASK (1 << 31)
+#define EMIF_REG_ZQ_CS0EN_SHIFT 30
+#define EMIF_REG_ZQ_CS0EN_MASK (1 << 30)
+#define EMIF_REG_ZQ_DUALCALEN_SHIFT 29
+#define EMIF_REG_ZQ_DUALCALEN_MASK (1 << 29)
+#define EMIF_REG_ZQ_SFEXITEN_SHIFT 28
+#define EMIF_REG_ZQ_SFEXITEN_MASK (1 << 28)
+#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT 18
+#define EMIF_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18)
+#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT 16
+#define EMIF_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16)
+#define EMIF_REG_ZQ_REFINTERVAL_SHIFT 0
+#define EMIF_REG_ZQ_REFINTERVAL_MASK (0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define EMIF_REG_TA_CS1EN_SHIFT 31
+#define EMIF_REG_TA_CS1EN_MASK (1 << 31)
+#define EMIF_REG_TA_CS0EN_SHIFT 30
+#define EMIF_REG_TA_CS0EN_MASK (1 << 30)
+#define EMIF_REG_TA_SFEXITEN_SHIFT 28
+#define EMIF_REG_TA_SFEXITEN_MASK (1 << 28)
+#define EMIF_REG_TA_DEVWDT_SHIFT 26
+#define EMIF_REG_TA_DEVWDT_MASK (0x3 << 26)
+#define EMIF_REG_TA_DEVCNT_SHIFT 24
+#define EMIF_REG_TA_DEVCNT_MASK (0x3 << 24)
+#define EMIF_REG_TA_REFINTERVAL_SHIFT 0
+#define EMIF_REG_TA_REFINTERVAL_MASK (0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define EMIF_REG_MADDRSPACE_SHIFT 14
+#define EMIF_REG_MADDRSPACE_MASK (0x3 << 14)
+#define EMIF_REG_MBURSTSEQ_SHIFT 11
+#define EMIF_REG_MBURSTSEQ_MASK (0x7 << 11)
+#define EMIF_REG_MCMD_SHIFT 8
+#define EMIF_REG_MCMD_MASK (0x7 << 8)
+#define EMIF_REG_MCONNID_SHIFT 0
+#define EMIF_REG_MCONNID_MASK (0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT 4
+#define EMIF_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHIFT 0
+#define EMIF_REG_READ_LATENCY_MASK (0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHDW_SHIFT 0
+#define EMIF_REG_READ_LATENCY_SHDW_MASK (0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_2 */
+#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT 0
+#define EMIF_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
+
+/* DMM */
+#define DMM_BASE 0x4E000040
+
+/* Memory Adapter */
+#define MA_BASE 0x482AF040
+
+/* DMM_LISA_MAP */
+#define EMIF_SYS_ADDR_SHIFT 24
+#define EMIF_SYS_ADDR_MASK (0xff << 24)
+#define EMIF_SYS_SIZE_SHIFT 20
+#define EMIF_SYS_SIZE_MASK (0x7 << 20)
+#define EMIF_SDRC_INTL_SHIFT 18
+#define EMIF_SDRC_INTL_MASK (0x3 << 18)
+#define EMIF_SDRC_ADDRSPC_SHIFT 16
+#define EMIF_SDRC_ADDRSPC_MASK (0x3 << 16)
+#define EMIF_SDRC_MAP_SHIFT 8
+#define EMIF_SDRC_MAP_MASK (0x3 << 8)
+#define EMIF_SDRC_ADDR_SHIFT 0
+#define EMIF_SDRC_ADDR_MASK (0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED 0
+#define DMM_SDRC_MAP_EMIF1_ONLY 1
+#define DMM_SDRC_MAP_EMIF2_ONLY 2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3
+
+#define DMM_SDRC_INTL_NONE 0
+#define DMM_SDRC_INTL_128B 1
+#define DMM_SDRC_INTL_256B 2
+#define DMM_SDRC_INTL_512 3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM 0
+#define DMM_SDRC_ADDR_SPC_NVM 1
+#define DMM_SDRC_ADDR_SPC_INVALID 2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\
+ (DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\
+ (CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\
+ (0 << EMIF_SDRC_ADDR_SHIFT) |\
+ (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\
+ (0xFF << EMIF_SYS_ADDR_SHIFT))
+
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+ u32 emif_mod_id_rev;
+ u32 emif_status;
+ u32 emif_sdram_config;
+ u32 emif_lpddr2_nvm_config;
+ u32 emif_sdram_ref_ctrl;
+ u32 emif_sdram_ref_ctrl_shdw;
+ u32 emif_sdram_tim_1;
+ u32 emif_sdram_tim_1_shdw;
+ u32 emif_sdram_tim_2;
+ u32 emif_sdram_tim_2_shdw;
+ u32 emif_sdram_tim_3;
+ u32 emif_sdram_tim_3_shdw;
+ u32 emif_lpddr2_nvm_tim;
+ u32 emif_lpddr2_nvm_tim_shdw;
+ u32 emif_pwr_mgmt_ctrl;
+ u32 emif_pwr_mgmt_ctrl_shdw;
+ u32 emif_lpddr2_mode_reg_data;
+ u32 padding1[1];
+ u32 emif_lpddr2_mode_reg_data_es2;
+ u32 padding11[1];
+ u32 emif_lpddr2_mode_reg_cfg;
+ u32 emif_l3_config;
+ u32 emif_l3_cfg_val_1;
+ u32 emif_l3_cfg_val_2;
+ u32 emif_iodft_tlgc;
+ u32 padding2[7];
+ u32 emif_perf_cnt_1;
+ u32 emif_perf_cnt_2;
+ u32 emif_perf_cnt_cfg;
+ u32 emif_perf_cnt_sel;
+ u32 emif_perf_cnt_tim;
+ u32 padding3;
+ u32 emif_read_idlectrl;
+ u32 emif_read_idlectrl_shdw;
+ u32 padding4;
+ u32 emif_irqstatus_raw_sys;
+ u32 emif_irqstatus_raw_ll;
+ u32 emif_irqstatus_sys;
+ u32 emif_irqstatus_ll;
+ u32 emif_irqenable_set_sys;
+ u32 emif_irqenable_set_ll;
+ u32 emif_irqenable_clr_sys;
+ u32 emif_irqenable_clr_ll;
+ u32 padding5;
+ u32 emif_zq_config;
+ u32 emif_temp_alert_config;
+ u32 emif_l3_err_log;
+ u32 padding6[4];
+ u32 emif_ddr_phy_ctrl_1;
+ u32 emif_ddr_phy_ctrl_1_shdw;
+ u32 emif_ddr_phy_ctrl_2;
+};
+
+struct dmm_lisa_map_regs {
+ u32 dmm_lisa_map_0;
+ u32 dmm_lisa_map_1;
+ u32 dmm_lisa_map_2;
+ u32 dmm_lisa_map_3;
+};
+
+#define CS0 0
+#define CS1 1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT 1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES 6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M 0
+#define ADDR_TABLE_INDEX128M 1
+#define ADDR_TABLE_INDEX256M 2
+#define ADDR_TABLE_INDEX512M 3
+#define ADDR_TABLE_INDEX1GS4 4
+#define ADDR_TABLE_INDEX2GS4 5
+#define ADDR_TABLE_INDEX4G 6
+#define ADDR_TABLE_INDEX8G 7
+#define ADDR_TABLE_INDEX1GS2 8
+#define ADDR_TABLE_INDEX2GS2 9
+#define ADDR_TABLE_INDEXMAX 10
+
+/* Number of Row bits */
+#define ROW_9 0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8 0
+#define COL_9 1
+#define COL_10 2
+#define COL_11 3
+#define COL_7 4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6 156
+#define T_REFI_7_8 78
+#define T_REFI_3_9 39
+
+#define EBANK_CS1_DIS 0
+#define EBANK_CS1_EN 1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT 3
+/* Read Latency for the highest frequency you want to use */
+#ifdef CONFIG_OMAP54XX
+#define RL_FINAL 8
+#else
+#define RL_FINAL 6
+#endif
+
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE 0
+#define LPDDR2_VOLTAGE_RAMPING 1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL 5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS (1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL (50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT 4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT 3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE 1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE 0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE 1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE 0
+#define LP_MODE_CLOCK_STOP 1
+#define LP_MODE_SELF_REFRESH 2
+#define LP_MODE_PWR_DN 3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE 0
+#define DPD_ENABLE 1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM 0xF
+#define REG_SR_TIM 0xF
+#define REG_PD_TIM 0xF
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+ ((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
+ ((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+ ((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)\
+ & EMIF_REG_LP_MODE_MASK) |\
+ ((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\
+ & EMIF_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+ ((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\
+ & EMIF_REG_CS_TIM_SHDW_MASK) |\
+ ((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\
+ & EMIF_REG_SR_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+ & EMIF_REG_PD_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+ & EMIF_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0 0x0A300000
+
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF
+
+/*
+* MR1 value:
+* Burst length : 8
+* Burst type : sequential
+* Wrap : enabled
+* nWR : 3(default). EMIF does not do pre-charge.
+* : So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23
+
+/* MR2 */
+#define MR2_RL3_WL1 1
+#define MR2_RL4_WL2 2
+#define MR2_RL5_WL2 3
+#define MR2_RL6_WL3 4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS 0x56
+#define MR10_ZQ_ZQCL 0xAB
+#define MR10_ZQ_ZQINIT 0xFF
+#define MR10_ZQ_ZQRESET 0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1 0
+#define TEMP_ALERT_CONFIG_DEVWDT_32 2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY 0
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS 4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb 0
+#define LPDDR2_DENSITY_128Mb 1
+#define LPDDR2_DENSITY_256Mb 2
+#define LPDDR2_DENSITY_512Mb 3
+#define LPDDR2_DENSITY_1Gb 4
+#define LPDDR2_DENSITY_2Gb 5
+#define LPDDR2_DENSITY_4Gb 6
+#define LPDDR2_DENSITY_8Gb 7
+#define LPDDR2_DENSITY_16Gb 8
+#define LPDDR2_DENSITY_32Gb 9
+
+/* LPDDR2 type */
+#define LPDDR2_TYPE_S4 0
+#define LPDDR2_TYPE_S2 1
+#define LPDDR2_TYPE_NVM 2
+
+/* LPDDR2 IO width */
+#define LPDDR2_IO_WIDTH_32 0
+#define LPDDR2_IO_WIDTH_16 1
+#define LPDDR2_IO_WIDTH_8 2
+
+/* Mode register numbers */
+#define LPDDR2_MR0 0
+#define LPDDR2_MR1 1
+#define LPDDR2_MR2 2
+#define LPDDR2_MR3 3
+#define LPDDR2_MR4 4
+#define LPDDR2_MR5 5
+#define LPDDR2_MR6 6
+#define LPDDR2_MR7 7
+#define LPDDR2_MR8 8
+#define LPDDR2_MR9 9
+#define LPDDR2_MR10 10
+#define LPDDR2_MR11 11
+#define LPDDR2_MR16 16
+#define LPDDR2_MR17 17
+#define LPDDR2_MR18 18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT 0
+#define LPDDR2_MR0_DAI_MASK 1
+#define LPDDR2_MR0_DI_SHIFT 1
+#define LPDDR2_MR0_DI_MASK (1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT 2
+#define LPDDR2_MR0_DNVI_MASK (1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT 0
+#define MR4_SDRAM_REF_RATE_MASK 7
+#define MR4_TUF_SHIFT 7
+#define MR4_TUF_MASK (1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2
+#define SDRAM_TEMP_NOMINAL 0x3
+#define SDRAM_TEMP_RESERVED_4 0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG 1
+#define LPDDR2_MANUFACTURER_QIMONDA 2
+#define LPDDR2_MANUFACTURER_ELPIDA 3
+#define LPDDR2_MANUFACTURER_ETRON 4
+#define LPDDR2_MANUFACTURER_NANYA 5
+#define LPDDR2_MANUFACTURER_HYNIX 6
+#define LPDDR2_MANUFACTURER_MOSEL 7
+#define LPDDR2_MANUFACTURER_WINBOND 8
+#define LPDDR2_MANUFACTURER_ESMT 9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST 12
+#define LPDDR2_MANUFACTURER_ZMOS 13
+#define LPDDR2_MANUFACTURER_INTEL 14
+#define LPDDR2_MANUFACTURER_NUMONYX 254
+#define LPDDR2_MANUFACTURER_MICRON 255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT 0x0
+#define MR8_TYPE_MASK 0x3
+#define MR8_DENSITY_SHIFT 0x2
+#define MR8_DENSITY_MASK (0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT 0x6
+#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
+
+struct lpddr2_addressing {
+ u8 num_banks;
+ u8 t_REFI_us_x10;
+ u8 row_sz[2]; /* One entry each for x32 and x16 */
+ u8 col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+ u32 max_freq;
+ u8 RL;
+ u8 tRPab;
+ u8 tRCD;
+ u8 tWR;
+ u8 tRASmin;
+ u8 tRRD;
+ u8 tWTRx2;
+ u8 tXSR;
+ u8 tXPx2;
+ u8 tRFCab;
+ u8 tRTPx2;
+ u8 tCKE;
+ u8 tCKESR;
+ u8 tZQCS;
+ u32 tZQCL;
+ u32 tZQINIT;
+ u8 tDQSCKMAXx2;
+ u8 tRASmax;
+ u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+ u32 tRL;
+ u32 tRP_AB;
+ u32 tRCD;
+ u32 tWR;
+ u32 tRAS_MIN;
+ u32 tRRD;
+ u32 tWTR;
+ u32 tXP;
+ u32 tRTP;
+ u8 tCKE;
+ u32 tCKESR;
+ u32 tFAW;
+};
+
+struct lpddr2_device_details {
+ u8 type;
+ u8 density;
+ u8 io_width;
+ u8 manufacturer;
+};
+
+struct lpddr2_device_timings {
+ const struct lpddr2_ac_timings **ac_timings;
+ const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+ const struct lpddr2_device_details *cs0_device_details;
+ const struct lpddr2_device_details *cs1_device_details;
+ const struct lpddr2_device_timings *cs0_device_timings;
+ const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+ u32 freq;
+ u32 sdram_config_init;
+ u32 sdram_config;
+ u32 ref_ctrl;
+ u32 sdram_tim1;
+ u32 sdram_tim2;
+ u32 sdram_tim3;
+ u32 read_idle_ctrl;
+ u32 zq_config;
+ u32 temp_alert_config;
+ u32 emif_ddr_phy_ctlr_1_init;
+ u32 emif_ddr_phy_ctlr_1;
+};
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c) ({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c) ({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details);
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern u32 *const T_num;
+extern u32 *const T_den;
+extern u32 *const emif_sizes;
+#endif
+
+
+#endif
projects / oweals / u-boot.git / commitdiff