QONG: fix and update board config file

Fix flash memory map and other updates for QONG board:

- adjust/fix "kernel_addr" settings
- adjust/fix mtdparts NOR flash settings
- add mtdparts NAND flash mapping
- sort command list
- enable "setexpr" command
- enable ext2 support
- delete bogus comment

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/include/configs/qong.h b/include/configs/qong.h
index f26ced1d7f31c2be3ad8cf7c30f4684c1a415fee..426d90d7dea780b18609dd4ca345e7b14a364a1a 100644 (file)
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -102,6 +102,7 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #endif /* CONFIG_CMD_USB */
 
@@ -124,25 +125,16 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SPI
-#define CONFIG_CMD_DATE
-#define BOARD_LATE_INIT
 
-/*
- * You can compile in a MAC address and your custom net settings by using
- * the following syntax.
- *
- * #define CONFIG_ETHADDR              xx:xx:xx:xx:xx:xx
- * #define CONFIG_SERVERIP             <server ip>
- * #define CONFIG_IPADDR               <board ip>
- * #define CONFIG_GATEWAYIP            <gateway ip>
- * #define CONFIG_NETMASK              <your netmask>
- */
+#define BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY       5
 
@@ -164,7 +156,7 @@
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addmisc=setenv bootargs ${bootargs}\0"                         \
        "uboot_addr=A0000000\0"                                         \
-       "kernel_addr=A00A0000\0"                                        \
+       "kernel_addr=A00C0000\0"                                        \
        "ramdisk_addr=A0300000\0"                                       \
        "u-boot=qong/u-boot.bin\0"                                      \
        "kernel_addr_r=80800000\0"                                      \
@@ -296,10 +288,14 @@ extern int qong_nand_rdy(void *chip);
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT         "nor0=physmap-flash.0"
+#define MTDIDS_DEFAULT         "nor0=physmap-flash.0,"         \
+                               "nand0=gen_nand"
 #define MTDPARTS_DEFAULT       \
-       "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"     \
-       "128k(env2),2432k(kernel),13m(ramdisk),-(user)"
+       "mtdparts=physmap-flash.0:"                             \
+                       "512k(U-Boot),128k(env1),128k(env2),"   \
+                       "2304k(kernel),13m(ramdisk),-(user);"   \
+               "gen_nand:"                                     \
+                       "128m(nand)"
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0x80000000