+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=2010.03
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:= \
- http://mirror2.librecmc.org/sources \
- ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=
-PKG_TARGETS:=bin
-
-PKG_LICENSE:=GPL-2.0 GPL-2.0+
-PKG_LICENSE_FILES:=Licenses/README
-
-include $(INCLUDE_DIR)/package.mk
-
-define uboot/Default
- TITLE:=
- CONFIG:=
- IMAGE:=
-endef
-
-define uboot/nbg460n_550n_550nh
- TITLE:=U-boot for the NBG460N/550N/550NH routers
-endef
-
-UBOOTS:=nbg460n_550n_550nh
-
-define Package/uboot/template
-define Package/uboot-ar71xx-$(1)
- SECTION:=boot
- CATEGORY:=Boot Loaders
- TITLE:=$(2)
- DEPENDS:=@TARGET_ar71xx_generic
- URL:=http://www.denx.de/wiki/U-Boot
- DEFAULT:=y if (TARGET_ar71xx_generic_NBG_460N_550N_550NH || TARGET_ar71xx_generic_Default || CONFIG_TARGET_ar71xx_generic_Minimal)
- VARIANT:=$(1)
-endef
-endef
-
-define BuildUbootPackage
- $(eval $(uboot/Default))
- $(eval $(uboot/$(1)))
- $(call Package/uboot/template,$(1),$(TITLE))
-endef
-
-
-ifdef BUILD_VARIANT
-$(eval $(call uboot/$(BUILD_VARIANT)))
-UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),librecmc-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-endif
-
-define Build/Prepare
- $(call Build/Prepare/Default)
- $(CP) ./files/* $(PKG_BUILD_DIR)
- find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
-define Build/Configure
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(UBOOT_CONFIG)_config
-endef
-
-define Build/Compile
- $(MAKE) -C $(PKG_BUILD_DIR) \
- CROSS_COMPILE=$(TARGET_CROSS)
-endef
-
-define Package/uboot/install/template
-define Package/uboot-ar71xx-$(1)/install
- $(INSTALL_DIR) $$(1)
- $(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2)
-endef
-endef
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call Package/uboot/install/template,$(u),librecmc-$(BOARD)-$(SUBTARGET)-$(u)-u-boot.bin)) \
-)
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call BuildUbootPackage,$(u))) \
- $(eval $(call BuildPackage,uboot-ar71xx-$(u))) \
-)
+++ /dev/null
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS-y += $(BOARD).o
-SOBJS-y += lowlevel_init.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS-y))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-TEXT_BASE = 0x81E00000
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-
-
-
-.globl lowlevel_init
-/*
- All done by Bootbase, nothing to do
-*/
-lowlevel_init:
- jr ra
- nop
-
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/reboot.h>
-#include <asm/ar71xx.h>
-#include <asm/ar71xx_gpio.h>
-
-#define NBG460N_WAN_LED 19
-
-phys_size_t initdram(int board_type)
-{
- return (32*1024*1024);
-}
-
-int checkboard(void)
-{
- // Set pin 19 to 1, to stop WAN LED blinking
- ar71xx_setpindir(NBG460N_WAN_LED, 1);
- ar71xx_setpin(NBG460N_WAN_LED, 1);
-
- printf("U-boot on Zyxel NBG460N\n");
- return 0;
-}
-
-void _machine_restart(void)
-{
- for (;;) {
- writel((RESET_MODULE_FULL_CHIP | RESET_MODULE_DDR),
- KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
- readl(KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
- }
-}
-
-int board_eth_init(bd_t *bis)
-{
- char *phynames[] = {RTL8366_DEVNAME, RTL8366_DEVNAME};
- u16 phyids[] = {RTL8366_LANPHY_ID, RTL8366_WANPHY_ID};
- u16 phyfixed[] = {1, 0};
-
- if (ag71xx_register(bis, phynames, phyids, phyfixed) <= 0)
- return -1;
-
- if (rtl8366s_initialize())
- return -1;
-
- if (rtl8366_mii_register(bis))
- return -1;
-
- return 0;
-}
-
-int misc_init_r(void) {
- uint8_t macaddr[6];
- uint8_t enetaddr[6];
-
- debug("Testing mac addresses\n");
-
- memcpy(macaddr, (uint8_t *) CONFIG_ETHADDR_ADDR, 6);
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- debug("Setting eth0 mac addr to %pM\n", macaddr);
- eth_setenv_enetaddr("ethaddr", macaddr);
- }
-
- if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
- macaddr[5] += 1;
- debug("Setting eth1 mac addr to %pM\n", macaddr);
- eth_setenv_enetaddr("eth1addr", macaddr);
- }
-
- return 0;
-}
+++ /dev/null
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/addrspace.h>
-#include <asm/types.h>
-#include <config.h>
-#include <asm/ar71xx.h>
-
-#define REG_SIZE 4
-
-/* === END OF CONFIG === */
-
-/* register offset */
-#define OFS_RCV_BUFFER (0*REG_SIZE)
-#define OFS_TRANS_HOLD (0*REG_SIZE)
-#define OFS_SEND_BUFFER (0*REG_SIZE)
-#define OFS_INTR_ENABLE (1*REG_SIZE)
-#define OFS_INTR_ID (2*REG_SIZE)
-#define OFS_DATA_FORMAT (3*REG_SIZE)
-#define OFS_LINE_CONTROL (3*REG_SIZE)
-#define OFS_MODEM_CONTROL (4*REG_SIZE)
-#define OFS_RS232_OUTPUT (4*REG_SIZE)
-#define OFS_LINE_STATUS (5*REG_SIZE)
-#define OFS_MODEM_STATUS (6*REG_SIZE)
-#define OFS_RS232_INPUT (6*REG_SIZE)
-#define OFS_SCRATCH_PAD (7*REG_SIZE)
-
-#define OFS_DIVISOR_LSB (0*REG_SIZE)
-#define OFS_DIVISOR_MSB (1*REG_SIZE)
-
-#define UART16550_READ(y) readl(KSEG1ADDR(AR71XX_UART_BASE+y))
-#define UART16550_WRITE(x, z) writel(z, KSEG1ADDR((AR71XX_UART_BASE+x)))
-
-void
-ar71xx_sys_frequency(u32 *cpu_freq, u32 *ddr_freq, u32 *ahb_freq)
-{
-#ifndef CONFIG_AR91XX
- u32 pll, pll_div, cpu_div, ahb_div, ddr_div, freq;
-
- pll = readl(KSEG1ADDR(AR71XX_PLL_REG_CPU_CONFIG + AR71XX_PLL_BASE));
-
- pll_div =
- ((pll & AR71XX_PLL_DIV_MASK) >> AR71XX_PLL_DIV_SHIFT) + 1;
-
- cpu_div =
- ((pll & AR71XX_CPU_DIV_MASK) >> AR71XX_CPU_DIV_SHIFT) + 1;
-
- ddr_div =
- ((pll & AR71XX_DDR_DIV_MASK) >> AR71XX_DDR_DIV_SHIFT) + 1;
-
- ahb_div =
- (((pll & AR71XX_AHB_DIV_MASK) >> AR71XX_AHB_DIV_SHIFT) + 1)*2;
-
- freq = pll_div * 40000000;
-
- if (cpu_freq)
- *cpu_freq = freq/cpu_div;
-
- if (ddr_freq)
- *ddr_freq = freq/ddr_div;
-
- if (ahb_freq)
- *ahb_freq = (freq/cpu_div)/ahb_div;
-
-#else
- u32 pll, pll_div, ahb_div, ddr_div, freq;
-
- pll = readl(KSEG1ADDR(AR91XX_PLL_REG_CPU_CONFIG + AR71XX_PLL_BASE));
-
- pll_div =
- ((pll & AR91XX_PLL_DIV_MASK) >> AR91XX_PLL_DIV_SHIFT);
-
- ddr_div =
- ((pll & AR91XX_DDR_DIV_MASK) >> AR91XX_DDR_DIV_SHIFT) + 1;
-
- ahb_div =
- (((pll & AR91XX_AHB_DIV_MASK) >> AR91XX_AHB_DIV_SHIFT) + 1)*2;
-
- freq = pll_div * 5000000;
-
- if (cpu_freq)
- *cpu_freq = freq;
-
- if (ddr_freq)
- *ddr_freq = freq/ddr_div;
-
- if (ahb_freq)
- *ahb_freq = freq/ahb_div;
-#endif
-}
-
-
-int serial_init(void)
-{
- u32 div;
- u32 ahb_freq = 100000000;
-
- ar71xx_sys_frequency (0, 0, &ahb_freq);
- div = ahb_freq/(16 * CONFIG_BAUDRATE);
-
- // enable uart pins
-#ifndef CONFIG_AR91XX
- writel(AR71XX_GPIO_FUNC_UART_EN, KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_FUNC));
-#else
- writel(AR91XX_GPIO_FUNC_UART_EN, KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_FUNC));
-#endif
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- UART16550_WRITE(OFS_DIVISOR_LSB, (div & 0xff));
- UART16550_WRITE(OFS_DIVISOR_MSB, ((div >> 8) & 0xff));
-
- /* clear DIAB bit*/
- UART16550_WRITE(OFS_LINE_CONTROL, 0x00);
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, 0x3);
-
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- return 0;
-}
-
-int serial_tstc (void)
-{
- return(UART16550_READ(OFS_LINE_STATUS) & 0x1);
-}
-
-int serial_getc(void)
-{
- while(!serial_tstc());
-
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-void serial_putc(const char byte)
-{
- if (byte == '\n') serial_putc ('\r');
-
- while (((UART16550_READ(OFS_LINE_STATUS)) & 0x20) == 0x0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
-}
-
-void serial_setbrg (void)
-{
-}
-
-void serial_puts (const char *s)
-{
- while (*s)
- {
- serial_putc (*s++);
- }
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-
-#include <asm/ar71xx.h>
-
-#include "ag71xx.h"
-
-#ifdef AG71XX_DEBUG
-#define DBG(fmt,args...) printf(fmt ,##args)
-#else
-#define DBG(fmt,args...)
-#endif
-
-
-static struct ag71xx agtable[] = {
- {
- .mac_base = KSEG1ADDR(AR71XX_GE0_BASE),
- .mii_ctrl = KSEG1ADDR(AR71XX_MII_BASE + MII_REG_MII0_CTRL),
- .mii_if = CONFIG_AG71XX_MII0_IIF,
- } , {
- .mac_base = KSEG1ADDR(AR71XX_GE1_BASE),
- .mii_ctrl = KSEG1ADDR(AR71XX_MII_BASE + MII_REG_MII1_CTRL),
- .mii_if = CONFIG_AG71XX_MII1_IIF,
- }
-};
-
-static int ag71xx_ring_alloc(struct ag71xx_ring *ring, unsigned int size)
-{
- int err;
- int i;
- int rsize;
-
- ring->desc_size = sizeof(struct ag71xx_desc);
- if (ring->desc_size % (CONFIG_SYS_CACHELINE_SIZE)) {
- rsize = roundup(ring->desc_size, CONFIG_SYS_CACHELINE_SIZE);
- DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
- ring, ring->desc_size,
- rsize);
- ring->desc_size = rsize;
- }
-
- ring->descs_cpu = (u8 *) malloc((size * ring->desc_size)
- + CONFIG_SYS_CACHELINE_SIZE - 1);
- if (!ring->descs_cpu) {
- err = -1;
- goto err;
- }
- ring->descs_cpu = (u8 *) UNCACHED_SDRAM((((u32) ring->descs_cpu +
- CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1)));
- ring->descs_dma = (u8 *) virt_to_phys(ring->descs_cpu);
-
- ring->size = size;
-
- ring->buf = malloc(size * sizeof(*ring->buf));
- if (!ring->buf) {
- err = -1;
- goto err;
- }
- memset(ring->buf, 0, size * sizeof(*ring->buf));
-
- for (i = 0; i < size; i++) {
- ring->buf[i].desc =
- (struct ag71xx_desc *)&ring->descs_cpu[i * ring->desc_size];
- DBG("ag71xx: ring %p, desc %d at %p\n",
- ring, i, ring->buf[i].desc);
- }
-
- flush_cache( (u32) ring->buf, size * sizeof(*ring->buf));
-
- return 0;
-
- err:
- return err;
-}
-
-static void ag71xx_ring_tx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- int i;
-
- for (i = 0; i < AG71XX_TX_RING_SIZE; i++) {
- ring->buf[i].desc->next = (u32) virt_to_phys((ring->descs_dma +
- ring->desc_size * ((i + 1) % AG71XX_TX_RING_SIZE)));
-
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- ring->buf[i].skb = NULL;
- }
-
- ring->curr = 0;
-}
-
-static void ag71xx_ring_rx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int i;
-
- if (!ring->buf)
- return;
-
- for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
- ring->buf[i].desc->data = (u32) virt_to_phys(NetRxPackets[i]);
- flush_cache((u32) NetRxPackets[i], PKTSIZE_ALIGN);
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- }
-
- ring->curr = 0;
-}
-
-static int ag71xx_ring_rx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- unsigned int i;
-
- for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
- ring->buf[i].desc->next = (u32) virt_to_phys((ring->descs_dma +
- ring->desc_size * ((i + 1) % AG71XX_RX_RING_SIZE)));
-
- DBG("ag71xx: RX desc at %p, next is %08x\n",
- ring->buf[i].desc,
- ring->buf[i].desc->next);
- }
-
- for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
- ring->buf[i].desc->data = (u32) virt_to_phys(NetRxPackets[i]);
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- }
-
- ring->curr = 0;
-
- return 0;
-}
-
-static int ag71xx_rings_init(struct ag71xx *ag)
-{
- int ret;
-
- ret = ag71xx_ring_alloc(&ag->tx_ring, AG71XX_TX_RING_SIZE);
- if (ret)
- return ret;
-
- ag71xx_ring_tx_init(ag);
-
- ret = ag71xx_ring_alloc(&ag->rx_ring, AG71XX_RX_RING_SIZE);
- if (ret)
- return ret;
-
- ret = ag71xx_ring_rx_init(ag);
- return ret;
-}
-
-static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
-{
- uint32_t base = KSEG1ADDR(AR71XX_PLL_BASE);
- u32 t;
-
- t = readl(base + cfg_reg);
- t &= ~(3 << shift);
- t |= (2 << shift);
- writel(t, base + cfg_reg);
- udelay(100);
-
- writel(pll_val, base + pll_reg);
-
- t |= (3 << shift);
- writel(t, base + cfg_reg);
- udelay(100);
-
- t &= ~(3 << shift);
- writel(t, base + cfg_reg);
- udelay(100);
-
- debug("ar71xx: pll_reg %#x: %#x\n", (unsigned int)(base + pll_reg),
- readl(base + pll_reg));
-}
-
-static void ar91xx_set_pll_ge0(int speed)
-{
- //u32 val = ar71xx_get_eth_pll(0, speed);
- u32 pll_val;
-
- switch (speed) {
- case SPEED_10:
- pll_val = 0x00441099;
- break;
- case SPEED_100:
- pll_val = 0x13000a44;
- break;
- case SPEED_1000:
- pll_val = 0x1a000000;
- break;
- default:
- BUG();
- }
-
- ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK,
- pll_val, AR91XX_ETH0_PLL_SHIFT);
-}
-
-static void ar91xx_set_pll_ge1(int speed)
-{
- //u32 val = ar71xx_get_eth_pll(1, speed);
- u32 pll_val;
-
- switch (speed) {
- case SPEED_10:
- pll_val = 0x00441099;
- break;
- case SPEED_100:
- pll_val = 0x13000a44;
- break;
- case SPEED_1000:
- pll_val = 0x1a000000;
- break;
- default:
- BUG();
- }
-
- ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK,
- pll_val, AR91XX_ETH1_PLL_SHIFT);
-}
-
-static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
-{
- u32 t;
-
- t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
- | (((u32) mac[3]) << 8) | ((u32) mac[2]);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
-
- t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
-}
-
-static void ag71xx_dma_reset(struct ag71xx *ag)
-{
- u32 val;
- int i;
-
- DBG("%s: txdesc reg: 0x%08x rxdesc reg: 0x%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_TX_DESC),
- ag71xx_rr(ag, AG71XX_REG_RX_DESC));
-
- /* stop RX and TX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-
- /* clear descriptor addresses */
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, 0);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, 0);
-
- /* clear pending RX/TX interrupts */
- for (i = 0; i < 256; i++) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- }
-
- /* clear pending errors */
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
-
- val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (val)
- printf("%s: unable to clear DMA Rx status: %08x\n",
- ag->dev->name, val);
-
- val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
-
- /* mask out reserved bits */
- val &= ~0xff000000;
-
- if (val)
- printf("%s: unable to clear DMA Tx status: %08x\n",
- ag->dev->name, val);
-}
-
-static void ag71xx_halt(struct eth_device *dev)
-{
- struct ag71xx *ag = (struct ag71xx *) dev->priv;
-
- /* stop RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
-
- ag71xx_dma_reset(ag);
-}
-
-#define MAX_WAIT 1000
-
-static int ag71xx_send(struct eth_device *dev, volatile void *packet,
- int length)
-{
- struct ag71xx *ag = (struct ag71xx *) dev->priv;
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct ag71xx_desc *desc;
- int i;
-
- i = ring->curr % AG71XX_TX_RING_SIZE;
- desc = ring->buf[i].desc;
-
- if (!ag71xx_desc_empty(desc)) {
- printf("%s: tx buffer full\n", ag->dev->name);
- return 1;
- }
-
- flush_cache((u32) packet, length);
- desc->data = (u32) virt_to_phys(packet);
- desc->ctrl = (length & DESC_PKTLEN_M);
-
- DBG("%s: sending %#08x length %#08x\n",
- ag->dev->name, desc->data, desc->ctrl);
-
- ring->curr++;
- if (ring->curr >= AG71XX_TX_RING_SIZE){
- ring->curr = 0;
- }
-
- /* enable TX engine */
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
-
- for (i = 0; i < MAX_WAIT; i++)
- {
- if (ag71xx_desc_empty(desc))
- break;
- udelay(10);
- }
- if (i == MAX_WAIT) {
- printf("%s: tx timed out!\n", ag->dev->name);
- return -1;
- }
-
- /* disable TX engine */
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
- desc->data = 0;
- desc->ctrl = DESC_EMPTY;
-
- return 0;
-}
-
-static int ag71xx_recv(struct eth_device *dev)
-{
- struct ag71xx *ag = (struct ag71xx *) dev->priv;
- struct ag71xx_ring *ring = &ag->rx_ring;
-
- for (;;) {
- unsigned int i = ring->curr % AG71XX_RX_RING_SIZE;
- struct ag71xx_desc *desc = ring->buf[i].desc;
- int pktlen;
-
- if (ag71xx_desc_empty(desc))
- break;
-
- DBG("%s: rx packets, curr=%u\n", dev->name, ring->curr);
-
- pktlen = ag71xx_desc_pktlen(desc);
- pktlen -= ETH_FCS_LEN;
-
-
- NetReceive(NetRxPackets[i] , pktlen);
- flush_cache( (u32) NetRxPackets[i], PKTSIZE_ALIGN);
-
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- ring->curr++;
- if (ring->curr >= AG71XX_RX_RING_SIZE){
- ring->curr = 0;
- }
-
- }
-
- if ((ag71xx_rr(ag, AG71XX_REG_RX_CTRL) & RX_CTRL_RXE) == 0) {
- /* start RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
- }
-
- return 0;
-}
-
-#ifdef AG71XX_DEBUG
-static char *ag71xx_speed_str(struct ag71xx *ag)
-{
- switch (ag->speed) {
- case SPEED_1000:
- return "1000";
- case SPEED_100:
- return "100";
- case SPEED_10:
- return "10";
- }
-
- return "?";
-}
-#endif
-
-void ag71xx_link_adjust(struct ag71xx *ag)
-{
- u32 cfg2;
- u32 ifctl;
- u32 fifo5;
- u32 mii_speed;
-
- if (!ag->link) {
- DBG("%s: link down\n", ag->dev->name);
- return;
- }
-
- cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
- cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
- cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
-
- ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
- ifctl &= ~(MAC_IFCTL_SPEED);
-
- fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
- fifo5 &= ~FIFO_CFG5_BM;
-
- switch (ag->speed) {
- case SPEED_1000:
- mii_speed = MII_CTRL_SPEED_1000;
- cfg2 |= MAC_CFG2_IF_1000;
- fifo5 |= FIFO_CFG5_BM;
- break;
- case SPEED_100:
- mii_speed = MII_CTRL_SPEED_100;
- cfg2 |= MAC_CFG2_IF_10_100;
- ifctl |= MAC_IFCTL_SPEED;
- break;
- case SPEED_10:
- mii_speed = MII_CTRL_SPEED_10;
- cfg2 |= MAC_CFG2_IF_10_100;
- break;
- default:
- BUG();
- return;
- }
-
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
-
- if (ag->macNum == 0)
- ar91xx_set_pll_ge0(ag->speed);
- else
- ar91xx_set_pll_ge1(ag->speed);
-
- ag71xx_mii_ctrl_set_speed(ag, mii_speed);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
- ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
-
- DBG("%s: link up (%sMbps/%s duplex)\n",
- ag->dev->name,
- ag71xx_speed_str(ag),
- (1 == ag->duplex) ? "Full" : "Half");
-
- DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
-
- DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
-
- DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
- ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
- ag71xx_mii_ctrl_rr(ag));
-}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int ag71xx_getMiiSpeed(struct ag71xx *ag)
-{
- uint16_t phyreg, cap;
-
- if (miiphy_read(ag->phyname, ag->phyid,
- PHY_BMSR, &phyreg)) {
- puts("PHY_BMSR read failed, assuming no link\n");
- return -1;
- }
-
- if ((phyreg & PHY_BMSR_LS) == 0) {
- return -1;
- }
-
- if (miiphy_read(ag->phyname, ag->phyid,
- PHY_1000BTSR, &phyreg))
- return -1;
-
- if (phyreg & PHY_1000BTSR_1000FD) {
- ag->speed = SPEED_1000;
- ag->duplex = 1;
- } else if (phyreg & PHY_1000BTSR_1000HD) {
- ag->speed = SPEED_1000;
- ag->duplex = 0;
- } else {
- if (miiphy_read(ag->phyname, ag->phyid,
- PHY_ANAR, &cap))
- return -1;
-
- if (miiphy_read(ag->phyname, ag->phyid,
- PHY_ANLPAR, &phyreg))
- return -1;
-
- cap &= phyreg;
- if (cap & PHY_ANLPAR_TXFD) {
- ag->speed = SPEED_100;
- ag->duplex = 1;
- } else if (cap & PHY_ANLPAR_TX) {
- ag->speed = SPEED_100;
- ag->duplex = 0;
- } else if (cap & PHY_ANLPAR_10FD) {
- ag->speed = SPEED_10;
- ag->duplex = 1;
- } else {
- ag->speed = SPEED_10;
- ag->duplex = 0;
- }
- }
-
- ag->link = 1;
-
- return 0;
-}
-#endif
-
-static int ag71xx_hw_start(struct eth_device *dev, bd_t * bd)
-{
- struct ag71xx *ag = (struct ag71xx *) dev->priv;
-
- ag71xx_dma_reset(ag);
-
- ag71xx_ring_rx_clean(ag);
- ag71xx_ring_tx_init(ag);
-
- ag71xx_wr(ag, AG71XX_REG_TX_DESC,
- (u32) virt_to_phys(ag->tx_ring.descs_dma));
- ag71xx_wr(ag, AG71XX_REG_RX_DESC,
- (u32) virt_to_phys(ag->rx_ring.descs_dma));
-
- ag71xx_hw_set_macaddr(ag, ag->dev->enetaddr);
-
- if (ag->phyfixed) {
- ag->link = 1;
- ag->duplex = 1;
- ag->speed = SPEED_1000;
- } else {
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
- if (ag71xx_getMiiSpeed(ag))
- return -1;
-#else
- /* only fixed, without mii */
- return -1;
-#endif
-
- }
- ag71xx_link_adjust(ag);
-
- DBG("%s: txdesc reg: %#08x rxdesc reg: %#08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_TX_DESC),
- ag71xx_rr(ag, AG71XX_REG_RX_DESC));
-
- /* start RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
-
- return 0;
-}
-
-#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
-
-#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
- FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
- FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
- FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
- FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
- FIFO_CFG4_VT)
-
-#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
- FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
- FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
- FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
- FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
- FIFO_CFG5_17 | FIFO_CFG5_SF)
-
-static int ag71xx_hw_init(struct ag71xx *ag)
-{
- int ret = 0;
- uint32_t reg;
- uint32_t mask, mii_type;
-
- if (ag->macNum == 0) {
- mask = (RESET_MODULE_GE0_MAC | RESET_MODULE_GE0_PHY);
- mii_type = 0x13;
- } else {
- mask = (RESET_MODULE_GE1_MAC | RESET_MODULE_GE1_PHY);
- mii_type = 0x11;
- }
-
- // mac soft reset
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
- udelay(20);
-
- // device stop
- reg = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
- ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, reg | mask);
- udelay(100 * 1000);
-
- // device start
- reg = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
- ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, reg & ~mask);
- udelay(100 * 1000);
-
- /* setup MAC configuration registers */
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, (MAC_CFG1_RXE | MAC_CFG1_TXE));
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
- MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
-
- /* setup FIFO configuration register 0 */
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
-
- /* setup MII interface type */
- ag71xx_mii_ctrl_set_if(ag, ag->mii_if);
-
- /* setup mdio clock divisor */
- ag71xx_wr(ag, AG71XX_REG_MII_CFG, MII_CFG_CLK_DIV_20);
-
- /* setup FIFO configuration registers */
- ag71xx_sb(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
-
- ag71xx_dma_reset(ag);
-
- ret = ag71xx_rings_init(ag);
- if (ret)
- return -1;
-
- ag71xx_wr(ag, AG71XX_REG_TX_DESC,
- (u32) virt_to_phys(ag->tx_ring.descs_dma));
- ag71xx_wr(ag, AG71XX_REG_RX_DESC,
- (u32) virt_to_phys(ag->rx_ring.descs_dma));
-
- ag71xx_hw_set_macaddr(ag, ag->dev->enetaddr);
-
- return 0;
-}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#define AG71XX_MDIO_RETRY 1000
-#define AG71XX_MDIO_DELAY 5
-
-static inline struct ag71xx *ag71xx_name2mac(char *devname)
-{
- if (strcmp(devname, agtable[0].dev->name) == 0)
- return &agtable[0];
- else if (strcmp(devname, agtable[1].dev->name) == 0)
- return &agtable[1];
- else
- return NULL;
-}
-
-static inline void ag71xx_mdio_wr(struct ag71xx *ag, unsigned reg,
- u32 value)
-{
- uint32_t r;
-
- r = ag->mac_base + reg;
- writel(value, r);
-
- /* flush write */
- (void) readl(r);
-}
-
-static inline u32 ag71xx_mdio_rr(struct ag71xx *ag, unsigned reg)
-{
- return readl(ag->mac_base + reg);
-}
-
-static int ag71xx_mdio_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *val)
-{
- struct ag71xx *ag = ag71xx_name2mac(devname);
- uint16_t regData;
- int i;
-
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_READ);
-
- i = AG71XX_MDIO_RETRY;
- while (ag71xx_mdio_rr(ag, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
- if (i-- == 0) {
- printf("%s: mii_read timed out\n",
- ag->dev->name);
- return -1;
- }
- udelay(AG71XX_MDIO_DELAY);
- }
-
- regData = (uint16_t) ag71xx_mdio_rr(ag, AG71XX_REG_MII_STATUS) & 0xffff;
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
-
- DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, regData);
-
- if (val)
- *val = regData;
-
- return 0;
-}
-
-static int ag71xx_mdio_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short val)
-{
- struct ag71xx *ag = ag71xx_name2mac(devname);
- int i;
-
- if (ag == NULL)
- return 1;
-
- DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
-
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(ag, AG71XX_REG_MII_CTRL, val);
-
- i = AG71XX_MDIO_RETRY;
- while (ag71xx_mdio_rr(ag, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
- if (i-- == 0) {
- printf("%s: mii_write timed out\n",
- ag->dev->name);
- break;
- }
- udelay(AG71XX_MDIO_DELAY);
- }
-
- return 0;
-}
-#endif
-
-int ag71xx_register(bd_t * bis, char *phyname[], uint16_t phyid[], uint16_t phyfixed[])
-{
- int i, num = 0;
- u8 used_ports[MAX_AG71XX_DEVS] = CONFIG_AG71XX_PORTS;
-
- for (i = 0; i < MAX_AG71XX_DEVS; i++) {
- /*skip if port is configured not to use */
- if (used_ports[i] == 0)
- continue;
-
- agtable[i].dev = malloc(sizeof(struct eth_device));
- if (agtable[i].dev == NULL) {
- puts("malloc failed\n");
- return 0;
- }
- memset(agtable[i].dev, 0, sizeof(struct eth_device));
- sprintf(agtable[i].dev->name, "eth%d", i);
-
- agtable[i].dev->iobase = 0;
- agtable[i].dev->init = ag71xx_hw_start;
- agtable[i].dev->halt = ag71xx_halt;
- agtable[i].dev->send = ag71xx_send;
- agtable[i].dev->recv = ag71xx_recv;
- agtable[i].dev->priv = (void *) (&agtable[i]);
- agtable[i].macNum = i;
- eth_register(agtable[i].dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
- if ((phyname == NULL) || (phyid == NULL) || (phyfixed == NULL))
- return -1;
-
- agtable[i].phyname = strdup(phyname[i]);
- agtable[i].phyid = phyid[i];
- agtable[i].phyfixed = phyfixed[i];
-
- miiphy_register(agtable[i].dev->name, ag71xx_mdio_read,
- ag71xx_mdio_write);
-#endif
-
- if (ag71xx_hw_init(&agtable[i]))
- continue;
-
- num++;
- }
-
- return num;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __AG71XX_H
-#define __AG71XX_H
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#include <asm/ar71xx.h>
-
-// controller has 2 ports
-#define MAX_AG71XX_DEVS 2
-
-#define ETH_FCS_LEN 4
-
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-
-
-#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
-#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
-#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
-
-#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
-#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
-
-#define AG71XX_TX_FIFO_LEN 2048
-#define AG71XX_TX_MTU_LEN 1536
-#define AG71XX_RX_PKT_RESERVE 64
-#define AG71XX_RX_PKT_SIZE \
- (AG71XX_RX_PKT_RESERVE + ETH_HLEN + ETH_FRAME_LEN + ETH_FCS_LEN)
-
-#ifndef CONFIG_SYS_RX_ETH_BUFFER
-#define AG71XX_TX_RING_SIZE 4
-#define AG71XX_RX_RING_SIZE 4
-#else
-#define AG71XX_TX_RING_SIZE CONFIG_SYS_RX_ETH_BUFFER
-#define AG71XX_RX_RING_SIZE CONFIG_SYS_RX_ETH_BUFFER
-#endif
-
-#define AG71XX_TX_THRES_STOP (AG71XX_TX_RING_SIZE - 4)
-#define AG71XX_TX_THRES_WAKEUP \
- (AG71XX_TX_RING_SIZE - (AG71XX_TX_RING_SIZE / 4))
-
-
-
-
-struct ag71xx_desc {
- u32 data;
- u32 ctrl;
-#define DESC_EMPTY BIT(31)
-#define DESC_MORE BIT(24)
-#define DESC_PKTLEN_M 0xfff
- u32 next;
- u32 pad;
-} __attribute__((aligned(4)));
-
-struct ag71xx_buf {
- struct sk_buff *skb;
- struct ag71xx_desc *desc;
- dma_addr_t dma_addr;
- u32 pad;
-};
-
-struct ag71xx_ring {
- struct ag71xx_buf *buf;
- u8 *descs_cpu;
- u8 *descs_dma;
- unsigned int desc_size;
- unsigned int curr;
- unsigned int size;
-};
-
-struct ag71xx {
- uint32_t mac_base;
- uint32_t mii_ctrl;
-
- struct eth_device *dev;
-
- struct ag71xx_ring rx_ring;
- struct ag71xx_ring tx_ring;
-
- char *phyname;
- u16 phyid;
- u16 phyfixed;
- uint32_t link;
- uint32_t speed;
- int32_t duplex;
- uint32_t macNum;
- uint32_t mii_if;
-};
-
-void ag71xx_link_adjust(struct ag71xx *ag);
-
-int ag71xx_phy_connect(struct ag71xx *ag);
-void ag71xx_phy_disconnect(struct ag71xx *ag);
-void ag71xx_phy_start(struct ag71xx *ag);
-void ag71xx_phy_stop(struct ag71xx *ag);
-
-static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
-{
- return ((desc->ctrl & DESC_EMPTY) != 0);
-}
-
-static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
-{
- return (desc->ctrl & DESC_PKTLEN_M);
-}
-
-/* Register offsets */
-#define AG71XX_REG_MAC_CFG1 0x0000
-#define AG71XX_REG_MAC_CFG2 0x0004
-#define AG71XX_REG_MAC_IPG 0x0008
-#define AG71XX_REG_MAC_HDX 0x000c
-#define AG71XX_REG_MAC_MFL 0x0010
-#define AG71XX_REG_MII_CFG 0x0020
-#define AG71XX_REG_MII_CMD 0x0024
-#define AG71XX_REG_MII_ADDR 0x0028
-#define AG71XX_REG_MII_CTRL 0x002c
-#define AG71XX_REG_MII_STATUS 0x0030
-#define AG71XX_REG_MII_IND 0x0034
-#define AG71XX_REG_MAC_IFCTL 0x0038
-#define AG71XX_REG_MAC_ADDR1 0x0040
-#define AG71XX_REG_MAC_ADDR2 0x0044
-#define AG71XX_REG_FIFO_CFG0 0x0048
-#define AG71XX_REG_FIFO_CFG1 0x004c
-#define AG71XX_REG_FIFO_CFG2 0x0050
-#define AG71XX_REG_FIFO_CFG3 0x0054
-#define AG71XX_REG_FIFO_CFG4 0x0058
-#define AG71XX_REG_FIFO_CFG5 0x005c
-#define AG71XX_REG_FIFO_RAM0 0x0060
-#define AG71XX_REG_FIFO_RAM1 0x0064
-#define AG71XX_REG_FIFO_RAM2 0x0068
-#define AG71XX_REG_FIFO_RAM3 0x006c
-#define AG71XX_REG_FIFO_RAM4 0x0070
-#define AG71XX_REG_FIFO_RAM5 0x0074
-#define AG71XX_REG_FIFO_RAM6 0x0078
-#define AG71XX_REG_FIFO_RAM7 0x007c
-
-#define AG71XX_REG_TX_CTRL 0x0180
-#define AG71XX_REG_TX_DESC 0x0184
-#define AG71XX_REG_TX_STATUS 0x0188
-#define AG71XX_REG_RX_CTRL 0x018c
-#define AG71XX_REG_RX_DESC 0x0190
-#define AG71XX_REG_RX_STATUS 0x0194
-#define AG71XX_REG_INT_ENABLE 0x0198
-#define AG71XX_REG_INT_STATUS 0x019c
-
-#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
-#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
-#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
-#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
-#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
-#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
-#define MAC_CFG1_LB BIT(8) /* Loopback mode */
-#define MAC_CFG1_SR BIT(31) /* Soft Reset */
-
-#define MAC_CFG2_FDX BIT(0)
-#define MAC_CFG2_CRC_EN BIT(1)
-#define MAC_CFG2_PAD_CRC_EN BIT(2)
-#define MAC_CFG2_LEN_CHECK BIT(4)
-#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
-#define MAC_CFG2_IF_1000 BIT(9)
-#define MAC_CFG2_IF_10_100 BIT(8)
-
-#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
-#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
-#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
-#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
-#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
-#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
- | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
-
-#define FIFO_CFG0_ENABLE_SHIFT 8
-
-#define FIFO_CFG4_DE BIT(0) /* Drop Event */
-#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG4_FC BIT(2) /* False Carrier */
-#define FIFO_CFG4_CE BIT(3) /* Code Error */
-#define FIFO_CFG4_CR BIT(4) /* CRC error */
-#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
-#define FIFO_CFG4_LO BIT(6) /* Length out of range */
-#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
-#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
-#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
-#define FIFO_CFG4_DR BIT(10) /* Dribble */
-#define FIFO_CFG4_LE BIT(11) /* Long Event */
-#define FIFO_CFG4_CF BIT(12) /* Control Frame */
-#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
-#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
-#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
-#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
-#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
-
-#define FIFO_CFG5_DE BIT(0) /* Drop Event */
-#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG5_FC BIT(2) /* False Carrier */
-#define FIFO_CFG5_CE BIT(3) /* Code Error */
-#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
-#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
-#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
-#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
-#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
-#define FIFO_CFG5_DR BIT(9) /* Dribble */
-#define FIFO_CFG5_CF BIT(10) /* Control Frame */
-#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
-#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
-#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
-#define FIFO_CFG5_LE BIT(14) /* Long Event */
-#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
-#define FIFO_CFG5_16 BIT(16) /* unknown */
-#define FIFO_CFG5_17 BIT(17) /* unknown */
-#define FIFO_CFG5_SF BIT(18) /* Short Frame */
-#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
-
-#define AG71XX_INT_TX_PS BIT(0)
-#define AG71XX_INT_TX_UR BIT(1)
-#define AG71XX_INT_TX_BE BIT(3)
-#define AG71XX_INT_RX_PR BIT(4)
-#define AG71XX_INT_RX_OF BIT(6)
-#define AG71XX_INT_RX_BE BIT(7)
-
-#define MAC_IFCTL_SPEED BIT(16)
-
-#define MII_CFG_CLK_DIV_4 0
-#define MII_CFG_CLK_DIV_6 2
-#define MII_CFG_CLK_DIV_8 3
-#define MII_CFG_CLK_DIV_10 4
-#define MII_CFG_CLK_DIV_14 5
-#define MII_CFG_CLK_DIV_20 6
-#define MII_CFG_CLK_DIV_28 7
-#define MII_CFG_RESET BIT(31)
-
-#define MII_CMD_WRITE 0x0
-#define MII_CMD_READ 0x1
-#define MII_ADDR_SHIFT 8
-#define MII_IND_BUSY BIT(0)
-#define MII_IND_INVALID BIT(2)
-
-#define TX_CTRL_TXE BIT(0) /* Tx Enable */
-
-#define TX_STATUS_PS BIT(0) /* Packet Sent */
-#define TX_STATUS_UR BIT(1) /* Tx Underrun */
-#define TX_STATUS_BE BIT(3) /* Bus Error */
-
-#define RX_CTRL_RXE BIT(0) /* Rx Enable */
-
-#define RX_STATUS_PR BIT(0) /* Packet Received */
-#define RX_STATUS_OF BIT(2) /* Rx Overflow */
-#define RX_STATUS_BE BIT(3) /* Bus Error */
-
-#define MII_CTRL_IF_MASK 3
-#define MII_CTRL_SPEED_SHIFT 4
-#define MII_CTRL_SPEED_MASK 3
-#define MII_CTRL_SPEED_10 0
-#define MII_CTRL_SPEED_100 1
-#define MII_CTRL_SPEED_1000 2
-
-static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
-{
- __raw_writel(value, ag->mac_base + reg);
- /* flush write */
- (void) __raw_readl(ag->mac_base + reg);
-}
-
-static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
-{
- return __raw_readl(ag->mac_base + reg);
-}
-
-static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- uint32_t r;
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) | mask, r);
- /* flush write */
- (void)__raw_readl(r);
-}
-
-static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- uint32_t r;
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) & ~mask, r);
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value)
-{
- __raw_writel(value, ag->mii_ctrl);
-
- /* flush write */
- __raw_readl(ag->mii_ctrl);
-}
-
-static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag)
-{
- return __raw_readl(ag->mii_ctrl);
-}
-
-static void inline ag71xx_mii_ctrl_set_if(struct ag71xx *ag,
- unsigned int mii_if)
-{
- u32 t;
-
- t = ag71xx_mii_ctrl_rr(ag);
- t &= ~(MII_CTRL_IF_MASK);
- t |= (mii_if & MII_CTRL_IF_MASK);
- ag71xx_mii_ctrl_wr(ag, t);
-}
-
-static void inline ag71xx_mii_ctrl_set_speed(struct ag71xx *ag,
- unsigned int speed)
-{
- u32 t;
-
- t = ag71xx_mii_ctrl_rr(ag);
- t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT);
- t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT;
- ag71xx_mii_ctrl_wr(ag, t);
-}
-
-#ifdef CONFIG_AG71XX_AR8216_SUPPORT
-void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
-int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
- int pktlen);
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return ag71xx_get_pdata(ag)->has_ar8216;
-}
-#else
-static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb)
-{
-}
-
-static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb,
- int pktlen)
-{
- return 0;
-}
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return 0;
-}
-#endif
-
-#endif /* _AG71XX_H */
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef RTL8366_MII_H
-#define RTL8366_MII_H
-
-#define MII_CONTROL_REG 0
-#define MII_STATUS_REG 1
-#define MII_PHY_ID0 2
-#define MII_PHY_ID1 3
-#define MII_LOCAL_CAP 4
-#define MII_REMOTE_CAP 5
-#define MII_EXT_AUTONEG 6
-#define MII_LOCAL_NEXT_PAGE 7
-#define MII_REMOTE_NEXT_PAGE 8
-#define MII_GIGA_CONTROL 9
-#define MII_GIGA_STATUS 10
-#define MII_EXT_STATUS_REG 15
-
-/* Control register */
-#define MII_CONTROL_1000MBPS 6
-#define MII_CONTROL_COLL_TEST 7
-#define MII_CONTROL_FULLDUPLEX 8
-#define MII_CONTROL_RENEG 9
-#define MII_CONTROL_ISOLATE 10
-#define MII_CONTROL_POWERDOWN 11
-#define MII_CONTROL_AUTONEG 12
-#define MII_CONTROL_100MBPS 13
-#define MII_CONTROL_LOOPBACK 14
-#define MII_CONTROL_RESET 15
-
-/* Status/Extended status register */
-/* Basic status */
-#define MII_STATUS_CAPABILITY 0
-#define MII_STATUS_JABBER 1
-#define MII_STATUS_LINK_UP 2
-#define MII_STATUS_AUTONEG_ABLE 3
-#define MII_STATUS_REMOTE_FAULT 4
-#define MII_STATUS_AUTONEG_DONE 5
-#define MII_STATUS_NO_PREAMBLE 6
-#define MII_STATUS_RESERVED 7
-#define MII_STATUS_EXTENDED 8
-#define MII_STATUS_100_T2_HALF 9
-#define MII_STATUS_100_T2_FULL 10
-#define MII_STATUS_10_TX_HALF 11
-#define MII_STATUS_10_TX_FULL 12
-#define MII_STATUS_100_TX_HALF 13
-#define MII_STATUS_100_TX_FULL 14
-#define MII_STATUS_100_T4 15
-
-#define MII_GIGA_CONTROL_HALF 8
-#define MII_GIGA_CONTROL_FULL 9
-#define MII_GIGA_STATUS_HALF 10
-#define MII_GIGA_STATUS_FULL 11
-
-/* Extended status */
-#define MII_STATUS_1000_T_HALF 12
-#define MII_STATUS_1000_T_FULL 13
-#define MII_STATUS_1000_X_HALF 14
-#define MII_STATUS_1000_X_FULL 15
-
-/* Local/Remmote capability register */
-#define MII_CAP_10BASE_TX 5
-#define MII_CAP_10BASE_TX_FULL 6
-#define MII_CAP_100BASE_TX 7
-#define MII_CAP_100BASE_TX_FULL 8
-#define MII_CAP_100BASE_T4 9
-#define MII_CAP_SYMM_PAUSE 10
-#define MII_CAP_ASYMM_PAUSE 11
-#define MII_CAP_RESERVED 12
-#define MII_CAP_REMOTE_FAULT 13
-#define MII_CAP_ACKNOWLEDGE 14
-#define MII_CAP_NEXT_PAGE 15
-#define MII_CAP_IEEE_802_3 0x0001
-
-#define MII_LINK_MODE_MASK 0x1f
-
-#define REALTEK_RTL8366_CHIP_ID0 0x001C
-#define REALTEK_RTL8366_CHIP_ID1 0xC940
-#define REALTEK_RTL8366_CHIP_ID1_MP 0xC960
-
-#define REALTEK_MIN_PORT_ID 0
-#define REALTEK_MAX_PORT_ID 5
-#define REALTEK_MIN_PHY_ID REALTEK_MIN_PORT_ID
-#define REALTEK_MAX_PHY_ID 4
-#define REALTEK_CPU_PORT_ID REALTEK_MAX_PORT_ID
-#define REALTEK_PHY_PORT_MASK ((1<<(REALTEK_MAX_PHY_ID+1)) - (1<<REALTEK_MIN_PHY_ID))
-#define REALTEK_CPU_PORT_MASK (1<<REALTEK_CPU_PORT_ID)
-#define REALTEK_ALL_PORT_MASK (REALTEK_PHY_PORT_MASK | REALTEK_CPU_PORT_MASK)
-
-/* port ability */
-#define RTL8366S_PORT_ABILITY_BASE 0x0011
-
-/* port vlan control register */
-#define RTL8366S_PORT_VLAN_CTRL_BASE 0x0058
-
-/* port linking status */
-#define RTL8366S_PORT_LINK_STATUS_BASE 0x0060
-#define RTL8366S_PORT_STATUS_SPEED_BIT 0
-#define RTL8366S_PORT_STATUS_SPEED_MSK 0x0003
-#define RTL8366S_PORT_STATUS_DUPLEX_BIT 2
-#define RTL8366S_PORT_STATUS_DUPLEX_MSK 0x0004
-#define RTL8366S_PORT_STATUS_LINK_BIT 4
-#define RTL8366S_PORT_STATUS_LINK_MSK 0x0010
-#define RTL8366S_PORT_STATUS_TXPAUSE_BIT 5
-#define RTL8366S_PORT_STATUS_TXPAUSE_MSK 0x0020
-#define RTL8366S_PORT_STATUS_RXPAUSE_BIT 6
-#define RTL8366S_PORT_STATUS_RXPAUSE_MSK 0x0040
-#define RTL8366S_PORT_STATUS_AN_BIT 7
-#define RTL8366S_PORT_STATUS_AN_MSK 0x0080
-
-/* internal control */
-#define RTL8366S_RESET_CONTROL_REG 0x0100
-#define RTL8366S_RESET_QUEUE_BIT 2
-
-#define RTL8366S_CHIP_ID_REG 0x0105
-
-/* MAC control */
-#define RTL8366S_MAC_FORCE_CTRL0_REG 0x0F04
-#define RTL8366S_MAC_FORCE_CTRL1_REG 0x0F05
-
-
-/* PHY registers control */
-#define RTL8366S_PHY_ACCESS_CTRL_REG 0x8028
-#define RTL8366S_PHY_ACCESS_DATA_REG 0x8029
-
-#define RTL8366S_PHY_CTRL_READ 1
-#define RTL8366S_PHY_CTRL_WRITE 0
-
-#define RTL8366S_PHY_REG_MASK 0x1F
-#define RTL8366S_PHY_PAGE_OFFSET 5
-#define RTL8366S_PHY_PAGE_MASK (0x7<<5)
-#define RTL8366S_PHY_NO_OFFSET 9
-#define RTL8366S_PHY_NO_MASK (0x1F<<9)
-
-#define RTL8366S_PHY_NO_MAX 4
-#define RTL8366S_PHY_PAGE_MAX 7
-#define RTL8366S_PHY_ADDR_MAX 31
-
-/* cpu port control reg */
-#define RTL8366S_CPU_CTRL_REG 0x004F
-#define RTL8366S_CPU_DRP_BIT 14
-#define RTL8366S_CPU_DRP_MSK 0x4000
-#define RTL8366S_CPU_INSTAG_BIT 15
-#define RTL8366S_CPU_INSTAG_MSK 0x8000
-
-/* LED registers*/
-#define RTL8366S_LED_BLINK_REG 0x420
-#define RTL8366S_LED_BLINKRATE_BIT 0
-#define RTL8366S_LED_BLINKRATE_MSK 0x0007
-#define RTL8366S_LED_INDICATED_CONF_REG 0x421
-#define RTL8366S_LED_0_1_FORCE_REG 0x422
-#define RTL8366S_LED_2_3_FORCE_REG 0x423
-#define RTL8366S_LEDCONF_LEDFORCE 0x1F
-#define RTL8366S_LED_GROUP_MAX 4
-
-#define RTL8366S_GREEN_FEATURE_REG 0x000A
-#define RTL8366S_GREEN_FEATURE_TX_BIT 3
-#define RTL8366S_GREEN_FEATURE_TX_MSK 0x0008
-#define RTL8366S_GREEN_FEATURE_RX_BIT 4
-#define RTL8366S_GREEN_FEATURE_RX_MSK 0x0010
-
-#define RTL8366S_MODEL_ID_REG 0x5C
-#define RTL8366S_REV_ID_REG 0x5D
-#define RTL8366S_MODEL_8366SR 0x6027
-#define RTL8366S_MODEL_8366RB 0x5937
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <miiphy.h>
-#include MII_GPIOINCLUDE
-
-#include "rtl8366.h"
-
-#ifdef DEBUG_RTL8366
- #define DBG(fmt,args...) printf (fmt ,##args)
-#else
- #define DBG(fmt,args...)
-#endif
-
-
-//-------------------------------------------------------------------
-// Soft SMI functions
-//-------------------------------------------------------------------
-
-#define DELAY 2
-
-static void smi_init(void)
-{
- MII_SDAINPUT;
- MII_SCKINPUT;
-
- MII_SETSDA(1);
- MII_SETSCK(1);
-
- udelay(20);
-}
-
-static void smi_start(void)
-{
-/*
- * rtl8366 chip needs a extra clock with
- * SDA high before start condition
- */
-
- /* set gpio pins output */
- MII_SDAOUTPUT;
- MII_SCKOUTPUT;
- udelay(DELAY);
-
- /* set initial state: SCK:0, SDA:1 */
- MII_SETSCK(0);
- MII_SETSDA(1);
- udelay(DELAY);
-
- /* toggle clock */
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSCK(0);
- udelay(DELAY);
-
- /* start condition */
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSDA(0);
- udelay(DELAY);
- MII_SETSCK(0);
- udelay(DELAY);
- MII_SETSDA(1);
-}
-
-static void smi_stop(void)
-{
-/*
- * rtl8366 chip needs a extra clock with
- * SDA high after stop condition
- */
-
- /* stop condition */
- udelay(DELAY);
- MII_SETSDA(0);
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSDA(1);
- udelay(DELAY);
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSCK(0);
- udelay(DELAY);
-
- /* toggle clock */
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSCK(0);
- udelay(DELAY);
- MII_SETSCK(1);
-
- /* set gpio pins input */
- MII_SDAINPUT;
- MII_SCKINPUT;
-}
-
-static void smi_writeBits(uint32_t data, uint8_t length)
-{
- uint8_t test;
-
- for( ; length > 0; length--) {
- udelay(DELAY);
-
- /* output data */
- test = (((data & (1 << (length - 1))) != 0) ? 1 : 0);
- MII_SETSDA(test);
- udelay(DELAY);
-
- /* toogle clock */
- MII_SETSCK(1);
- udelay(DELAY);
- MII_SETSCK(0);
- }
-}
-
-static uint32_t smi_readBits(uint8_t length)
-{
- uint32_t ret;
-
- MII_SDAINPUT;
-
- for(ret = 0 ; length > 0; length--) {
- udelay(DELAY);
-
- ret <<= 1;
-
- /* toogle clock */
- MII_SETSCK(1);
- udelay(DELAY);
- ret |= MII_GETSDA;
- MII_SETSCK(0);
- }
-
- MII_SDAOUTPUT;
-
- return ret;
-}
-
-static int smi_waitAck(void)
-{
- uint32_t retry = 0;
-
- while (smi_readBits(1)) {
- if (retry++ == 5)
- return -1;
- }
-
- return 0;
-
-}
-
-static int smi_read(uint32_t reg, uint32_t *data)
-{
- uint32_t rawData;
-
- /* send start condition */
- smi_start();
- /* send CTRL1 code: 0b1010*/
- smi_writeBits(0x0a, 4);
- /* send CTRL2 code: 0b100 */
- smi_writeBits(0x04, 3);
- /* send READ command */
- smi_writeBits(0x01, 1);
-
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
-
- /* send address low */
- smi_writeBits(reg & 0xFF, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
- /* send address high */
- smi_writeBits((reg & 0xFF00) >> 8, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
-
- /* read data low */
- rawData = (smi_readBits(8) & 0xFF);
- /* send ACK */
- smi_writeBits(0, 1);
- /* read data high */
- rawData |= (smi_readBits(8) & 0xFF) << 8;
- /* send NACK */
- smi_writeBits(1, 1);
-
- /* send stop condition */
- smi_stop();
-
- if (data)
- *data = rawData;
-
- return 0;
-}
-
-static int smi_write(uint32_t reg, uint32_t data)
-{
- /* send start condition */
- smi_start();
- /* send CTRL1 code: 0b1010*/
- smi_writeBits(0x0a, 4);
- /* send CTRL2 code: 0b100 */
- smi_writeBits(0x04, 3);
- /* send WRITE command */
- smi_writeBits(0x00, 1);
-
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
-
- /* send address low */
- smi_writeBits(reg & 0xFF, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
- /* send address high */
- smi_writeBits((reg & 0xFF00) >> 8, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
-
- /* send data low */
- smi_writeBits(data & 0xFF, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
- /* send data high */
- smi_writeBits((data & 0xFF00) >> 8, 8);
- /* wait for ACK */
- if (smi_waitAck())
- return -1;
-
- /* send stop condition */
- smi_stop();
-
- return 0;
-}
-
-
-//-------------------------------------------------------------------
-// Switch register read / write functions
-//-------------------------------------------------------------------
-static int rtl8366_readRegister(uint32_t reg, uint16_t *data)
-{
- uint32_t regData;
-
- DBG("rtl8366: read register=%#04x, data=", reg);
-
- if (smi_read(reg, ®Data)) {
- printf("\nrtl8366 smi read failed!\n");
- return -1;
- }
-
- if (data)
- *data = regData;
-
- DBG("%#04x\n", regData);
-
- return 0;
-}
-
-static int rtl8366_writeRegister(uint32_t reg, uint16_t data)
-{
- DBG("rtl8366: write register=%#04x, data=%#04x\n", reg, data);
-
- if (smi_write(reg, data)) {
- printf("rtl8366 smi write failed!\n");
- return -1;
- }
-
- return 0;
-}
-
-static int rtl8366_setRegisterBit(uint32_t reg, uint32_t bitNum, uint32_t value)
-{
- uint16_t regData;
-
- if (bitNum >= 16)
- return -1;
-
- if (rtl8366_readRegister(reg, ®Data))
- return -1;
-
- if (value)
- regData |= (1 << bitNum);
- else
- regData &= ~(1 << bitNum);
-
- if (rtl8366_writeRegister(reg, regData))
- return -1;
-
- return 0;
-}
-
-//-------------------------------------------------------------------
-// MII PHY read / write functions
-//-------------------------------------------------------------------
-static int rtl8366_getPhyReg(uint32_t phyNum, uint32_t reg, uint16_t *data)
-{
- uint16_t phyAddr, regData;
-
- if (phyNum > RTL8366S_PHY_NO_MAX) {
- printf("rtl8366s: invalid phy number!\n");
- return -1;
- }
-
- if (phyNum > RTL8366S_PHY_ADDR_MAX) {
- printf("rtl8366s: invalid phy register number!\n");
- return -1;
- }
-
- if (rtl8366_writeRegister(RTL8366S_PHY_ACCESS_CTRL_REG,
- RTL8366S_PHY_CTRL_READ))
- return -1;
-
- phyAddr = 0x8000 | (1 << (phyNum + RTL8366S_PHY_NO_OFFSET))
- | (reg & RTL8366S_PHY_REG_MASK);
- if (rtl8366_writeRegister(phyAddr, 0))
- return -1;
-
- if (rtl8366_readRegister(RTL8366S_PHY_ACCESS_DATA_REG, ®Data))
- return -1;
-
- if (data)
- *data = regData;
-
- return 0;
-}
-
-static int rtl8366_setPhyReg(uint32_t phyNum, uint32_t reg, uint16_t data)
-{
- uint16_t phyAddr;
-
- if (phyNum > RTL8366S_PHY_NO_MAX) {
- printf("rtl8366s: invalid phy number!\n");
- return -1;
- }
-
- if (phyNum > RTL8366S_PHY_ADDR_MAX) {
- printf("rtl8366s: invalid phy register number!\n");
- return -1;
- }
-
- if (rtl8366_writeRegister(RTL8366S_PHY_ACCESS_CTRL_REG,
- RTL8366S_PHY_CTRL_WRITE))
- return -1;
-
- phyAddr = 0x8000 | (1 << (phyNum + RTL8366S_PHY_NO_OFFSET))
- | (reg & RTL8366S_PHY_REG_MASK);
- if (rtl8366_writeRegister(phyAddr, data))
- return -1;
-
- return 0;
-}
-
-static int rtl8366_miiread(char *devname, uchar phy_adr, uchar reg, ushort *data)
-{
- uint16_t regData;
-
- DBG("rtl8366_miiread: devname=%s, addr=%#02x, reg=%#02x\n",
- devname, phy_adr, reg);
-
- if (strcmp(devname, RTL8366_DEVNAME) != 0)
- return -1;
-
- if (rtl8366_getPhyReg(phy_adr, reg, ®Data)) {
- printf("rtl8366_miiread: write failed!\n");
- return -1;
- }
-
- if (data)
- *data = regData;
-
- return 0;
-}
-
-static int rtl8366_miiwrite(char *devname, uchar phy_adr, uchar reg, ushort data)
-{
- DBG("rtl8366_miiwrite: devname=%s, addr=%#02x, reg=%#02x, data=%#04x\n",
- devname, phy_adr, reg, data);
-
- if (strcmp(devname, RTL8366_DEVNAME) != 0)
- return -1;
-
- if (rtl8366_setPhyReg(phy_adr, reg, data)) {
- printf("rtl8366_miiwrite: write failed!\n");
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366_mii_register(bd_t *bis)
-{
- miiphy_register(strdup(RTL8366_DEVNAME), rtl8366_miiread,
- rtl8366_miiwrite);
-
- return 0;
-}
-
-
-//-------------------------------------------------------------------
-// Switch management functions
-//-------------------------------------------------------------------
-
-int rtl8366s_setGreenFeature(uint32_t tx, uint32_t rx)
-{
- if (rtl8366_setRegisterBit(RTL8366S_GREEN_FEATURE_REG,
- RTL8366S_GREEN_FEATURE_TX_BIT, tx))
- return -1;
-
- if (rtl8366_setRegisterBit(RTL8366S_GREEN_FEATURE_REG,
- RTL8366S_GREEN_FEATURE_RX_BIT, rx))
- return -1;
-
- return 0;
-}
-
-int rtl8366s_setPowerSaving(uint32_t phyNum, uint32_t enabled)
-{
- uint16_t regData;
-
- if (phyNum > RTL8366S_PHY_NO_MAX)
- return -1;
-
- if (rtl8366_getPhyReg(phyNum, 12, ®Data))
- return -1;
-
- if (enabled)
- regData |= (1 << 12);
- else
- regData &= ~(1 << 12);
-
- if (rtl8366_setPhyReg(phyNum, 12, regData))
- return -1;
-
- return 0;
-}
-
-int rtl8366s_setGreenEthernet(uint32_t greenFeature, uint32_t powerSaving)
-{
- uint32_t phyNum, i;
- uint16_t regData;
-
- const uint16_t greenSettings[][2] =
- {
- {0xBE5B,0x3500},
- {0xBE5C,0xB975},
- {0xBE5D,0xB9B9},
- {0xBE77,0xA500},
- {0xBE78,0x5A78},
- {0xBE79,0x6478}
- };
-
- if (rtl8366_readRegister(RTL8366S_MODEL_ID_REG, ®Data))
- return -1;
-
- switch (regData)
- {
- case 0x0000:
- for (i = 0; i < 6; i++) {
- if (rtl8366_writeRegister(RTL8366S_PHY_ACCESS_CTRL_REG, RTL8366S_PHY_CTRL_WRITE))
- return -1;
- if (rtl8366_writeRegister(greenSettings[i][0], greenSettings[i][1]))
- return -1;
- }
- break;
-
- case RTL8366S_MODEL_8366SR:
- if (rtl8366_writeRegister(RTL8366S_PHY_ACCESS_CTRL_REG, RTL8366S_PHY_CTRL_WRITE))
- return -1;
- if (rtl8366_writeRegister(greenSettings[0][0], greenSettings[0][1]))
- return -1;
- break;
-
- default:
- printf("rtl8366s_initChip: unsupported chip found!\n");
- return -1;
- }
-
- if (rtl8366s_setGreenFeature(greenFeature, powerSaving))
- return -1;
-
- for (phyNum = 0; phyNum <= RTL8366S_PHY_NO_MAX; phyNum++) {
- if (rtl8366s_setPowerSaving(phyNum, powerSaving))
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366s_setCPUPortMask(uint8_t port, uint32_t enabled)
-{
- if(port >= 6){
- printf("rtl8366s_setCPUPortMask: invalid port number\n");
- return -1;
- }
-
- return rtl8366_setRegisterBit(RTL8366S_CPU_CTRL_REG, port, enabled);
-}
-
-int rtl8366s_setCPUDisableInsTag(uint32_t enable)
-{
- return rtl8366_setRegisterBit(RTL8366S_CPU_CTRL_REG,
- RTL8366S_CPU_INSTAG_BIT, enable);
-}
-
-int rtl8366s_setCPUDropUnda(uint32_t enable)
-{
- return rtl8366_setRegisterBit(RTL8366S_CPU_CTRL_REG,
- RTL8366S_CPU_DRP_BIT, enable);
-}
-
-int rtl8366s_setCPUPort(uint8_t port, uint32_t noTag, uint32_t dropUnda)
-{
- uint32_t i;
-
- if(port >= 6){
- printf("rtl8366s_setCPUPort: invalid port number\n");
- return -1;
- }
-
- /* reset register */
- for(i = 0; i < 6; i++)
- {
- if(rtl8366s_setCPUPortMask(i, 0)){
- printf("rtl8366s_setCPUPort: rtl8366s_setCPUPortMask failed\n");
- return -1;
- }
- }
-
- if(rtl8366s_setCPUPortMask(port, 1)){
- printf("rtl8366s_setCPUPort: rtl8366s_setCPUPortMask failed\n");
- return -1;
- }
-
- if(rtl8366s_setCPUDisableInsTag(noTag)){
- printf("rtl8366s_setCPUPort: rtl8366s_setCPUDisableInsTag fail\n");
- return -1;
- }
-
- if(rtl8366s_setCPUDropUnda(dropUnda)){
- printf("rtl8366s_setCPUPort: rtl8366s_setCPUDropUnda fail\n");
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366s_setLedConfig(uint32_t ledNum, uint8_t config)
-{
- uint16_t regData;
-
- if(ledNum >= RTL8366S_LED_GROUP_MAX) {
- DBG("rtl8366s_setLedConfig: invalid led group\n");
- return -1;
- }
-
- if(config > RTL8366S_LEDCONF_LEDFORCE) {
- DBG("rtl8366s_setLedConfig: invalid led config\n");
- return -1;
- }
-
- if (rtl8366_readRegister(RTL8366S_LED_INDICATED_CONF_REG, ®Data)) {
- printf("rtl8366s_setLedConfig: failed to get led register!\n");
- return -1;
- }
-
- regData &= ~(0xF << (ledNum * 4));
- regData |= config << (ledNum * 4);
-
- if (rtl8366_writeRegister(RTL8366S_LED_INDICATED_CONF_REG, regData)) {
- printf("rtl8366s_setLedConfig: failed to set led register!\n");
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366s_getLedConfig(uint32_t ledNum, uint8_t *config)
-{
- uint16_t regData;
-
- if(ledNum >= RTL8366S_LED_GROUP_MAX) {
- DBG("rtl8366s_getLedConfig: invalid led group\n");
- return -1;
- }
-
- if (rtl8366_readRegister(RTL8366S_LED_INDICATED_CONF_REG, ®Data)) {
- printf("rtl8366s_getLedConfig: failed to get led register!\n");
- return -1;
- }
-
- if (config)
- *config = (regData >> (ledNum * 4)) & 0xF;
-
- return 0;
-}
-
-int rtl8366s_setLedForceValue(uint32_t group0, uint32_t group1,
- uint32_t group2, uint32_t group3)
-{
- uint16_t regData;
-
- regData = (group0 & 0x3F) | ((group1 & 0x3F) << 6);
- if (rtl8366_writeRegister(RTL8366S_LED_0_1_FORCE_REG, regData)) {
- printf("rtl8366s_setLedForceValue: failed to set led register!\n");
- return -1;
- }
-
- regData = (group2 & 0x3F) | ((group3 & 0x3F) << 6);
- if (rtl8366_writeRegister(RTL8366S_LED_2_3_FORCE_REG, regData)) {
- printf("rtl8366s_setLedForceValue: failed to set led register!\n");
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366s_initChip(void)
-{
- uint32_t ledGroup, i = 0;
- uint16_t regData;
- uint8_t ledData[RTL8366S_LED_GROUP_MAX];
- const uint16_t (*chipData)[2];
-
- const uint16_t chipB[][2] =
- {
- {0x0000, 0x0038},{0x8100, 0x1B37},{0xBE2E, 0x7B9F},{0xBE2B, 0xA4C8},
- {0xBE74, 0xAD14},{0xBE2C, 0xDC00},{0xBE69, 0xD20F},{0xBE3B, 0xB414},
- {0xBE24, 0x0000},{0xBE23, 0x00A1},{0xBE22, 0x0008},{0xBE21, 0x0120},
- {0xBE20, 0x1000},{0xBE24, 0x0800},{0xBE24, 0x0000},{0xBE24, 0xF000},
- {0xBE23, 0xDF01},{0xBE22, 0xDF20},{0xBE21, 0x101A},{0xBE20, 0xA0FF},
- {0xBE24, 0xF800},{0xBE24, 0xF000},{0x0242, 0x02BF},{0x0245, 0x02BF},
- {0x0248, 0x02BF},{0x024B, 0x02BF},{0x024E, 0x02BF},{0x0251, 0x02BF},
- {0x0230, 0x0A32},{0x0233, 0x0A32},{0x0236, 0x0A32},{0x0239, 0x0A32},
- {0x023C, 0x0A32},{0x023F, 0x0A32},{0x0254, 0x0A3F},{0x0255, 0x0064},
- {0x0256, 0x0A3F},{0x0257, 0x0064},{0x0258, 0x0A3F},{0x0259, 0x0064},
- {0x025A, 0x0A3F},{0x025B, 0x0064},{0x025C, 0x0A3F},{0x025D, 0x0064},
- {0x025E, 0x0A3F},{0x025F, 0x0064},{0x0260, 0x0178},{0x0261, 0x01F4},
- {0x0262, 0x0320},{0x0263, 0x0014},{0x021D, 0x9249},{0x021E, 0x0000},
- {0x0100, 0x0004},{0xBE4A, 0xA0B4},{0xBE40, 0x9C00},{0xBE41, 0x501D},
- {0xBE48, 0x3602},{0xBE47, 0x8051},{0xBE4C, 0x6465},{0x8000, 0x1F00},
- {0x8001, 0x000C},{0x8008, 0x0000},{0x8007, 0x0000},{0x800C, 0x00A5},
- {0x8101, 0x02BC},{0xBE53, 0x0005},{0x8E45, 0xAFE8},{0x8013, 0x0005},
- {0xBE4B, 0x6700},{0x800B, 0x7000},{0xBE09, 0x0E00},
- {0xFFFF, 0xABCD}
- };
-
- const uint16_t chipDefault[][2] =
- {
- {0x0242, 0x02BF},{0x0245, 0x02BF},{0x0248, 0x02BF},{0x024B, 0x02BF},
- {0x024E, 0x02BF},{0x0251, 0x02BF},
- {0x0254, 0x0A3F},{0x0256, 0x0A3F},{0x0258, 0x0A3F},{0x025A, 0x0A3F},
- {0x025C, 0x0A3F},{0x025E, 0x0A3F},
- {0x0263, 0x007C},{0x0100, 0x0004},
- {0xBE5B, 0x3500},{0x800E, 0x200F},{0xBE1D, 0x0F00},{0x8001, 0x5011},
- {0x800A, 0xA2F4},{0x800B, 0x17A3},{0xBE4B, 0x17A3},{0xBE41, 0x5011},
- {0xBE17, 0x2100},{0x8000, 0x8304},{0xBE40, 0x8304},{0xBE4A, 0xA2F4},
- {0x800C, 0xA8D5},{0x8014, 0x5500},{0x8015, 0x0004},{0xBE4C, 0xA8D5},
- {0xBE59, 0x0008},{0xBE09, 0x0E00},{0xBE36, 0x1036},{0xBE37, 0x1036},
- {0x800D, 0x00FF},{0xBE4D, 0x00FF},
- {0xFFFF, 0xABCD}
- };
-
- DBG("rtl8366s_initChip\n");
-
- /* save current led config and set to led force */
- for (ledGroup = 0; ledGroup < RTL8366S_LED_GROUP_MAX; ledGroup++) {
- if (rtl8366s_getLedConfig(ledGroup, &ledData[ledGroup]))
- return -1;
-
- if (rtl8366s_setLedConfig(ledGroup, RTL8366S_LEDCONF_LEDFORCE))
- return -1;
- }
-
- if (rtl8366s_setLedForceValue(0,0,0,0))
- return -1;
-
- if (rtl8366_readRegister(RTL8366S_MODEL_ID_REG, ®Data))
- return -1;
-
- switch (regData)
- {
- case 0x0000:
- chipData = chipB;
- break;
-
- case RTL8366S_MODEL_8366SR:
- chipData = chipDefault;
- break;
-
- default:
- printf("rtl8366s_initChip: unsupported chip found!\n");
- return -1;
- }
-
- DBG("rtl8366s_initChip: found %x chip\n", regData);
-
- while ((chipData[i][0] != 0xFFFF) && (chipData[i][1] != 0xABCD)) {
-
- /* phy settings*/
- if ((chipData[i][0] & 0xBE00) == 0xBE00) {
- if (rtl8366_writeRegister(RTL8366S_PHY_ACCESS_CTRL_REG,
- RTL8366S_PHY_CTRL_WRITE))
- return -1;
- }
-
- if (rtl8366_writeRegister(chipData[i][0], chipData[i][1]))
- return -1;
-
- i++;
- }
-
- /* chip needs some time */
- udelay(100 * 1000);
-
- /* restore led config */
- for (ledGroup = 0; ledGroup < RTL8366S_LED_GROUP_MAX; ledGroup++) {
- if (rtl8366s_setLedConfig(ledGroup, ledData[ledGroup]))
- return -1;
- }
-
- return 0;
-}
-
-int rtl8366s_initialize(void)
-{
- uint16_t regData;
-
- DBG("rtl8366s_initialize: start setup\n");
-
- smi_init();
-
- rtl8366_readRegister(RTL8366S_CHIP_ID_REG, ®Data);
- DBG("Realtek 8366SR switch ID %#04x\n", regData);
-
- if (regData != 0x8366) {
- printf("rtl8366s_initialize: found unsupported switch\n");
- return -1;
- }
-
- if (rtl8366s_initChip()) {
- printf("rtl8366s_initialize: init chip failed\n");
- return -1;
- }
-
- if (rtl8366s_setGreenEthernet(1, 1)) {
- printf("rtl8366s_initialize: set green ethernet failed\n");
- return -1;
- }
-
- /* Set port 5 noTag and don't dropUnda */
- if (rtl8366s_setCPUPort(5, 1, 0)) {
- printf("rtl8366s_initialize: set CPU port failed\n");
- return -1;
- }
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-
-#include <asm/addrspace.h>
-#include <asm/types.h>
-#include <asm/ar71xx.h>
-
-/*-----------------------------------------------------------------------
- * Definitions
- */
-
-#ifdef DEBUG_SPI
-#define PRINTD(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTD(fmt,args...)
-#endif
-
-struct ar71xx_spi_slave {
- struct spi_slave slave;
- unsigned int mode;
-};
-
-static inline struct ar71xx_spi_slave *to_ar71xx_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct ar71xx_spi_slave, slave);
-}
-
-/*=====================================================================*/
-/* Public Functions */
-/*=====================================================================*/
-
-/*-----------------------------------------------------------------------
- * Initialization
- */
-
-void spi_init()
-{
- PRINTD("ar71xx_spi: spi_init");
-
- // Init SPI Hardware, disable remap, set clock
- __raw_writel(0x43, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_CTRL));
-
- PRINTD(" ---> out\n");
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ar71xx_spi_slave *ss;
-
- PRINTD("ar71xx_spi: spi_setup_slave");
-
- if ((bus != 0) || (cs > 2))
- return NULL;
-
- ss = malloc(sizeof(struct ar71xx_spi_slave));
- if (!ss)
- return NULL;
-
- ss->slave.bus = bus;
- ss->slave.cs = cs;
- ss->mode = mode;
-
- /* TODO: Use max_hz to limit the SCK rate */
-
- PRINTD(" ---> out\n");
-
- return &ss->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ar71xx_spi_slave *ss = to_ar71xx_spi(slave);
-
- free(ss);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct ar71xx_spi_slave *ss = to_ar71xx_spi(slave);
- uint8_t *rx = din;
- const uint8_t *tx = dout;
- uint8_t curbyte, curbitlen, restbits;
- uint32_t bytes = bitlen / 8;
- uint32_t out;
- uint32_t in;
-
- PRINTD("ar71xx_spi: spi_xfer: slave:%p bitlen:%08x dout:%p din:%p flags:%08x\n", slave, bitlen, dout, din, flags);
-
- if (flags & SPI_XFER_BEGIN) {
- __raw_writel(SPI_FS_GPIO, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_FS));
- __raw_writel(SPI_IOC_CS_ALL, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_IOC));
- }
-
- restbits = (bitlen % 8);
- if (restbits != 0)
- bytes++;
-
- // enable chip select
- out = SPI_IOC_CS_ALL & ~(SPI_IOC_CS(slave->cs));
-
- while (bytes--) {
-
- curbyte = 0;
- if (tx) {
- curbyte = *tx++;
- }
-
- if (restbits != 0) {
- curbitlen = restbits;
- curbyte <<= 8 - restbits;
- } else {
- curbitlen = 8;
- }
-
- PRINTD("ar71xx_spi: sending: data:%02x length:%d\n", curbyte, curbitlen);
-
- /* clock starts at inactive polarity */
- for (curbyte <<= (8 - curbitlen); curbitlen; curbitlen--) {
-
- if (curbyte & (1 << 7))
- out |= SPI_IOC_DO;
- else
- out &= ~(SPI_IOC_DO);
-
- /* setup MSB (to slave) on trailing edge */
- __raw_writel(out, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_IOC));
-
- __raw_writel(out | SPI_IOC_CLK, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_IOC));
-
- curbyte <<= 1;
- }
-
- in = __raw_readl(KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_RDS));
- PRINTD("ar71xx_spi: received:%02x\n", in);
-
- if (rx) {
- if (restbits == 0) {
- *rx++ = in;
- } else {
- *rx++ = (in << (8 - restbits));
- }
- }
- }
-
- if (flags & SPI_XFER_END) {
- __raw_writel(SPI_IOC_CS(slave->cs), KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_IOC));
- __raw_writel(SPI_IOC_CS_ALL, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_IOC));
- __raw_writel(0, KSEG1ADDR(AR71XX_SPI_BASE + SPI_REG_FS));
- }
-
- PRINTD(" ---> out\n");
-
- return 0;
-}
+++ /dev/null
-/*
- * Atheros AR71xx SoC specific definitions
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_AR71XX_H
-#define __ASM_MACH_AR71XX_H
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-
-#ifndef __ASSEMBLER__
-
-#define BIT(x) (1<<(x))
-
-#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x08000000
-#define AR71XX_APB_BASE 0x18000000
-#define AR71XX_GE0_BASE 0x19000000
-#define AR71XX_GE0_SIZE 0x01000000
-#define AR71XX_GE1_BASE 0x1a000000
-#define AR71XX_GE1_SIZE 0x01000000
-#define AR71XX_EHCI_BASE 0x1b000000
-#define AR71XX_EHCI_SIZE 0x01000000
-#define AR71XX_OHCI_BASE 0x1c000000
-#define AR71XX_OHCI_SIZE 0x01000000
-#define AR7240_OHCI_BASE 0x1b000000
-#define AR7240_OHCI_SIZE 0x01000000
-#define AR71XX_SPI_BASE 0x1f000000
-#define AR71XX_SPI_SIZE 0x01000000
-
-#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
-#define AR71XX_DDR_CTRL_SIZE 0x10000
-#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000)
-#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
-#define AR71XX_UART_SIZE 0x10000
-#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-#define AR71XX_USB_CTRL_SIZE 0x10000
-#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
-#define AR71XX_GPIO_SIZE 0x10000
-#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-#define AR71XX_PLL_SIZE 0x10000
-#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
-#define AR71XX_RESET_SIZE 0x10000
-#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR71XX_MII_SIZE 0x10000
-#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000)
-#define AR71XX_SLIC_SIZE 0x10000
-#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000)
-#define AR71XX_DMA_SIZE 0x10000
-#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000)
-#define AR71XX_STEREO_SIZE 0x10000
-
-#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000)
-#define AR724X_PCI_CRP_SIZE 0x100
-
-#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000)
-#define AR724X_PCI_CTRL_SIZE 0x100
-
-#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
-#define AR91XX_WMAC_SIZE 0x30000
-
-#define AR71XX_MEM_SIZE_MIN 0x0200000
-#define AR71XX_MEM_SIZE_MAX 0x10000000
-
-#define AR71XX_CPU_IRQ_BASE 0
-#define AR71XX_MISC_IRQ_BASE 8
-#define AR71XX_MISC_IRQ_COUNT 8
-#define AR71XX_GPIO_IRQ_BASE 16
-#define AR71XX_GPIO_IRQ_COUNT 32
-#define AR71XX_PCI_IRQ_BASE 48
-#define AR71XX_PCI_IRQ_COUNT 8
-
-#define AR71XX_CPU_IRQ_IP2 (AR71XX_CPU_IRQ_BASE + 2)
-#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3)
-#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4)
-#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5)
-#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6)
-#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7)
-
-#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0)
-#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1)
-#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2)
-#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3)
-#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4)
-#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5)
-#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6)
-#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7)
-
-#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x))
-
-#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0)
-#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1)
-#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2)
-#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 4)
-
-extern u32 ar71xx_ahb_freq;
-extern u32 ar71xx_cpu_freq;
-extern u32 ar71xx_ddr_freq;
-
-enum ar71xx_soc_type {
- AR71XX_SOC_UNKNOWN,
- AR71XX_SOC_AR7130,
- AR71XX_SOC_AR7141,
- AR71XX_SOC_AR7161,
- AR71XX_SOC_AR7240,
- AR71XX_SOC_AR7241,
- AR71XX_SOC_AR7242,
- AR71XX_SOC_AR9130,
- AR71XX_SOC_AR9132
-};
-
-extern enum ar71xx_soc_type ar71xx_soc;
-
-/*
- * PLL block
- */
-#define AR71XX_PLL_REG_CPU_CONFIG 0x00
-#define AR71XX_PLL_REG_SEC_CONFIG 0x04
-#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10
-#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14
-
-#define AR71XX_PLL_DIV_SHIFT 3
-#define AR71XX_PLL_DIV_MASK 0x1f
-#define AR71XX_CPU_DIV_SHIFT 16
-#define AR71XX_CPU_DIV_MASK 0x3
-#define AR71XX_DDR_DIV_SHIFT 18
-#define AR71XX_DDR_DIV_MASK 0x3
-#define AR71XX_AHB_DIV_SHIFT 20
-#define AR71XX_AHB_DIV_MASK 0x7
-
-#define AR71XX_ETH0_PLL_SHIFT 17
-#define AR71XX_ETH1_PLL_SHIFT 19
-
-#define AR724X_PLL_REG_CPU_CONFIG 0x00
-#define AR724X_PLL_REG_PCIE_CONFIG 0x18
-
-#define AR724X_PLL_DIV_SHIFT 0
-#define AR724X_PLL_DIV_MASK 0x3ff
-#define AR724X_PLL_REF_DIV_SHIFT 10
-#define AR724X_PLL_REF_DIV_MASK 0xf
-#define AR724X_AHB_DIV_SHIFT 19
-#define AR724X_AHB_DIV_MASK 0x1
-#define AR724X_DDR_DIV_SHIFT 22
-#define AR724X_DDR_DIV_MASK 0x3
-
-#define AR91XX_PLL_REG_CPU_CONFIG 0x00
-#define AR91XX_PLL_REG_ETH_CONFIG 0x04
-#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14
-#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18
-
-#define AR91XX_PLL_DIV_SHIFT 0
-#define AR91XX_PLL_DIV_MASK 0x3ff
-#define AR91XX_DDR_DIV_SHIFT 22
-#define AR91XX_DDR_DIV_MASK 0x3
-#define AR91XX_AHB_DIV_SHIFT 19
-#define AR91XX_AHB_DIV_MASK 0x1
-
-#define AR91XX_ETH0_PLL_SHIFT 20
-#define AR91XX_ETH1_PLL_SHIFT 22
-
-// extern void __iomem *ar71xx_pll_base;
-
-// static inline void ar71xx_pll_wr(unsigned reg, u32 val)
-// {
- // __raw_writel(val, ar71xx_pll_base + reg);
-// }
-
-// static inline u32 ar71xx_pll_rr(unsigned reg)
-// {
- // return __raw_readl(ar71xx_pll_base + reg);
-// }
-
-/*
- * USB_CONFIG block
- */
-#define USB_CTRL_REG_FLADJ 0x00
-#define USB_CTRL_REG_CONFIG 0x04
-
-// extern void __iomem *ar71xx_usb_ctrl_base;
-
-// static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val)
-// {
- // __raw_writel(val, ar71xx_usb_ctrl_base + reg);
-// }
-
-// static inline u32 ar71xx_usb_ctrl_rr(unsigned reg)
-// {
- // return __raw_readl(ar71xx_usb_ctrl_base + reg);
-// }
-
-/*
- * GPIO block
- */
-#define GPIO_REG_OE 0x00
-#define GPIO_REG_IN 0x04
-#define GPIO_REG_OUT 0x08
-#define GPIO_REG_SET 0x0c
-#define GPIO_REG_CLEAR 0x10
-#define GPIO_REG_INT_MODE 0x14
-#define GPIO_REG_INT_TYPE 0x18
-#define GPIO_REG_INT_POLARITY 0x1c
-#define GPIO_REG_INT_PENDING 0x20
-#define GPIO_REG_INT_ENABLE 0x24
-#define GPIO_REG_FUNC 0x28
-
-#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-
-#define AR71XX_GPIO_COUNT 16
-
-#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-#define AR724X_GPIO_COUNT 18
-
-#define AR91XX_GPIO_FUNC_WMAC_LED_EN BIT(22)
-#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-#define AR91XX_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-#define AR91XX_GPIO_FUNC_I2S_MCKEN BIT(19)
-#define AR91XX_GPIO_FUNC_I2S1_EN BIT(18)
-#define AR91XX_GPIO_FUNC_I2S0_EN BIT(17)
-#define AR91XX_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-#define AR91XX_GPIO_FUNC_UART_EN BIT(8)
-#define AR91XX_GPIO_FUNC_USB_CLK_EN BIT(4)
-
-#define AR91XX_GPIO_COUNT 22
-
-// extern void __iomem *ar71xx_gpio_base;
-
-// static inline void ar71xx_gpio_wr(unsigned reg, u32 value)
-// {
- // __raw_writel(value, ar71xx_gpio_base + reg);
-// }
-
-// static inline u32 ar71xx_gpio_rr(unsigned reg)
-// {
- // return __raw_readl(ar71xx_gpio_base + reg);
-// }
-
-// void ar71xx_gpio_init(void) __init;
-// void ar71xx_gpio_function_enable(u32 mask);
-// void ar71xx_gpio_function_disable(u32 mask);
-// void ar71xx_gpio_function_setup(u32 set, u32 clear);
-
-/*
- * DDR_CTRL block
- */
-#define AR71XX_DDR_REG_PCI_WIN0 0x7c
-#define AR71XX_DDR_REG_PCI_WIN1 0x80
-#define AR71XX_DDR_REG_PCI_WIN2 0x84
-#define AR71XX_DDR_REG_PCI_WIN3 0x88
-#define AR71XX_DDR_REG_PCI_WIN4 0x8c
-#define AR71XX_DDR_REG_PCI_WIN5 0x90
-#define AR71XX_DDR_REG_PCI_WIN6 0x94
-#define AR71XX_DDR_REG_PCI_WIN7 0x98
-#define AR71XX_DDR_REG_FLUSH_GE0 0x9c
-#define AR71XX_DDR_REG_FLUSH_GE1 0xa0
-#define AR71XX_DDR_REG_FLUSH_USB 0xa4
-#define AR71XX_DDR_REG_FLUSH_PCI 0xa8
-
-#define AR724X_DDR_REG_FLUSH_GE0 0x7c
-#define AR724X_DDR_REG_FLUSH_GE1 0x80
-#define AR724X_DDR_REG_FLUSH_USB 0x84
-#define AR724X_DDR_REG_FLUSH_PCIE 0x88
-
-#define AR91XX_DDR_REG_FLUSH_GE0 0x7c
-#define AR91XX_DDR_REG_FLUSH_GE1 0x80
-#define AR91XX_DDR_REG_FLUSH_USB 0x84
-#define AR91XX_DDR_REG_FLUSH_WMAC 0x88
-
-#define PCI_WIN0_OFFS 0x10000000
-#define PCI_WIN1_OFFS 0x11000000
-#define PCI_WIN2_OFFS 0x12000000
-#define PCI_WIN3_OFFS 0x13000000
-#define PCI_WIN4_OFFS 0x14000000
-#define PCI_WIN5_OFFS 0x15000000
-#define PCI_WIN6_OFFS 0x16000000
-#define PCI_WIN7_OFFS 0x07000000
-
-// extern void __iomem *ar71xx_ddr_base;
-
-// static inline void ar71xx_ddr_wr(unsigned reg, u32 val)
-// {
- // __raw_writel(val, ar71xx_ddr_base + reg);
-// }
-
-// static inline u32 ar71xx_ddr_rr(unsigned reg)
-// {
- // return __raw_readl(ar71xx_ddr_base + reg);
-// }
-
-// void ar71xx_ddr_flush(u32 reg);
-
-/*
- * PCI block
- */
-#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000)
-#define AR71XX_PCI_CFG_SIZE 0x100
-
-#define PCI_REG_CRP_AD_CBE 0x00
-#define PCI_REG_CRP_WRDATA 0x04
-#define PCI_REG_CRP_RDDATA 0x08
-#define PCI_REG_CFG_AD 0x0c
-#define PCI_REG_CFG_CBE 0x10
-#define PCI_REG_CFG_WRDATA 0x14
-#define PCI_REG_CFG_RDDATA 0x18
-#define PCI_REG_PCI_ERR 0x1c
-#define PCI_REG_PCI_ERR_ADDR 0x20
-#define PCI_REG_AHB_ERR 0x24
-#define PCI_REG_AHB_ERR_ADDR 0x28
-
-#define PCI_CRP_CMD_WRITE 0x00010000
-#define PCI_CRP_CMD_READ 0x00000000
-#define PCI_CFG_CMD_READ 0x0000000a
-#define PCI_CFG_CMD_WRITE 0x0000000b
-
-#define PCI_IDSEL_ADL_START 17
-
-#define AR724X_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + 0x4000000)
-#define AR724X_PCI_CFG_SIZE 0x1000
-
-#define AR724X_PCI_REG_APP 0x00
-#define AR724X_PCI_REG_RESET 0x18
-#define AR724X_PCI_REG_INT_STATUS 0x4c
-#define AR724X_PCI_REG_INT_MASK 0x50
-
-#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0)
-#define AR724X_PCI_RESET_LINK_UP BIT(0)
-
-#define AR724X_PCI_INT_DEV0 BIT(14)
-
-/*
- * RESET block
- */
-#define AR71XX_RESET_REG_TIMER 0x00
-#define AR71XX_RESET_REG_TIMER_RELOAD 0x04
-#define AR71XX_RESET_REG_WDOG_CTRL 0x08
-#define AR71XX_RESET_REG_WDOG 0x0c
-#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10
-#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14
-#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18
-#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c
-#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20
-#define AR71XX_RESET_REG_RESET_MODULE 0x24
-#define AR71XX_RESET_REG_PERFC_CTRL 0x2c
-#define AR71XX_RESET_REG_PERFC0 0x30
-#define AR71XX_RESET_REG_PERFC1 0x34
-#define AR71XX_RESET_REG_REV_ID 0x90
-
-#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18
-#define AR91XX_RESET_REG_RESET_MODULE 0x1c
-#define AR91XX_RESET_REG_PERF_CTRL 0x20
-#define AR91XX_RESET_REG_PERFC0 0x24
-#define AR91XX_RESET_REG_PERFC1 0x28
-
-#define AR724X_RESET_REG_RESET_MODULE 0x1c
-
-#define WDOG_CTRL_LAST_RESET BIT(31)
-#define WDOG_CTRL_ACTION_MASK 3
-#define WDOG_CTRL_ACTION_NONE 0 /* no action */
-#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */
-#define WDOG_CTRL_ACTION_NMI 2 /* NMI */
-#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */
-
-#define MISC_INT_DMA BIT(7)
-#define MISC_INT_OHCI BIT(6)
-#define MISC_INT_PERFC BIT(5)
-#define MISC_INT_WDOG BIT(4)
-#define MISC_INT_UART BIT(3)
-#define MISC_INT_GPIO BIT(2)
-#define MISC_INT_ERROR BIT(1)
-#define MISC_INT_TIMER BIT(0)
-
-#define PCI_INT_CORE BIT(4)
-#define PCI_INT_DEV2 BIT(2)
-#define PCI_INT_DEV1 BIT(1)
-#define PCI_INT_DEV0 BIT(0)
-
-#define RESET_MODULE_EXTERNAL BIT(28)
-#define RESET_MODULE_FULL_CHIP BIT(24)
-#define RESET_MODULE_AMBA2WMAC BIT(22)
-#define RESET_MODULE_CPU_NMI BIT(21)
-#define RESET_MODULE_CPU_COLD BIT(20)
-#define RESET_MODULE_DMA BIT(19)
-#define RESET_MODULE_SLIC BIT(18)
-#define RESET_MODULE_STEREO BIT(17)
-#define RESET_MODULE_DDR BIT(16)
-#define RESET_MODULE_GE1_MAC BIT(13)
-#define RESET_MODULE_GE1_PHY BIT(12)
-#define RESET_MODULE_USBSUS_OVERRIDE BIT(10)
-#define RESET_MODULE_GE0_MAC BIT(9)
-#define RESET_MODULE_GE0_PHY BIT(8)
-#define RESET_MODULE_USB_OHCI_DLL BIT(6)
-#define RESET_MODULE_USB_HOST BIT(5)
-#define RESET_MODULE_USB_PHY BIT(4)
-#define RESET_MODULE_USB_OHCI_DLL_7240 BIT(3)
-#define RESET_MODULE_PCI_BUS BIT(1)
-#define RESET_MODULE_PCI_CORE BIT(0)
-
-#define AR724X_RESET_GE1_MDIO BIT(23)
-#define AR724X_RESET_GE0_MDIO BIT(22)
-#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10)
-#define AR724X_RESET_PCIE_PHY BIT(7)
-#define AR724X_RESET_PCIE BIT(6)
-
-#define REV_ID_MAJOR_MASK 0xfff0
-#define REV_ID_MAJOR_AR71XX 0x00a0
-#define REV_ID_MAJOR_AR913X 0x00b0
-#define REV_ID_MAJOR_AR7240 0x00c0
-#define REV_ID_MAJOR_AR7241 0x0100
-#define REV_ID_MAJOR_AR7242 0x1100
-
-#define AR71XX_REV_ID_MINOR_MASK 0x3
-#define AR71XX_REV_ID_MINOR_AR7130 0x0
-#define AR71XX_REV_ID_MINOR_AR7141 0x1
-#define AR71XX_REV_ID_MINOR_AR7161 0x2
-#define AR71XX_REV_ID_REVISION_MASK 0x3
-#define AR71XX_REV_ID_REVISION_SHIFT 2
-
-#define AR91XX_REV_ID_MINOR_MASK 0x3
-#define AR91XX_REV_ID_MINOR_AR9130 0x0
-#define AR91XX_REV_ID_MINOR_AR9132 0x1
-#define AR91XX_REV_ID_REVISION_MASK 0x3
-#define AR91XX_REV_ID_REVISION_SHIFT 2
-
-#define AR724X_REV_ID_REVISION_MASK 0x3
-
-// extern void __iomem *ar71xx_reset_base;
-
-static inline void ar71xx_reset_wr(unsigned reg, u32 val)
-{
- __raw_writel(val, KSEG1ADDR(AR71XX_RESET_BASE) + reg);
-}
-
-static inline u32 ar71xx_reset_rr(unsigned reg)
-{
- return __raw_readl(KSEG1ADDR(AR71XX_RESET_BASE) + reg);
-}
-
-// void ar71xx_device_stop(u32 mask);
-// void ar71xx_device_start(u32 mask);
-// int ar71xx_device_stopped(u32 mask);
-
-/*
- * SPI block
- */
-#define SPI_REG_FS 0x00 /* Function Select */
-#define SPI_REG_CTRL 0x04 /* SPI Control */
-#define SPI_REG_IOC 0x08 /* SPI I/O Control */
-#define SPI_REG_RDS 0x0c /* Read Data Shift */
-
-#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */
-
-#define SPI_CTRL_RD BIT(6) /* Remap Disable */
-#define SPI_CTRL_DIV_MASK 0x3f
-
-#define SPI_IOC_DO BIT(0) /* Data Out pin */
-#define SPI_IOC_CLK BIT(8) /* CLK pin */
-#define SPI_IOC_CS(n) BIT(16 + (n))
-#define SPI_IOC_CS0 SPI_IOC_CS(0)
-#define SPI_IOC_CS1 SPI_IOC_CS(1)
-#define SPI_IOC_CS2 SPI_IOC_CS(2)
-#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2)
-
-// void ar71xx_flash_acquire(void);
-// void ar71xx_flash_release(void);
-
-/*
- * MII_CTRL block
- */
-#define MII_REG_MII0_CTRL 0x00
-#define MII_REG_MII1_CTRL 0x04
-
-#define MII0_CTRL_IF_GMII 0
-#define MII0_CTRL_IF_MII 1
-#define MII0_CTRL_IF_RGMII 2
-#define MII0_CTRL_IF_RMII 3
-
-#define MII1_CTRL_IF_RGMII 0
-#define MII1_CTRL_IF_RMII 1
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* __ASM_MACH_AR71XX_H */
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _AR71XX_GPIO_H
-#define _AR71XX_GPIO_H
-
-#include <common.h>
-#include <asm/ar71xx.h>
-
-static inline void ar71xx_setpin(uint8_t pin, uint8_t state)
-{
- uint32_t reg = readl(KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OUT));
-
- if (state != 0) {
- reg |= (1 << pin);
- } else {
- reg &= ~(1 << pin);
- }
-
- writel(reg, KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OUT));
- readl(KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OUT));
-}
-
-static inline uint32_t ar71xx_getpin(uint8_t pin)
-{
- uint32_t reg = readl(KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_IN));
- return (((reg & (1 << pin)) != 0) ? 1 : 0);
-}
-
-static inline void ar71xx_setpindir(uint8_t pin, uint8_t direction)
-{
- uint32_t reg = readl(KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OE));
-
- if (direction != 0) {
- reg |= (1 << pin);
- } else {
- reg &= ~(1 << pin);
- }
-
- writel(reg, KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OE));
- readl(KSEG1ADDR(AR71XX_GPIO_BASE + GPIO_REG_OE));
-}
-
-
-#endif /* AR71XX_GPIO_H */
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Kurz <michi.kurz@googlemail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This file contains the configuration parameters for the zyxel nbg460n board. */
-
-#ifndef _NBG460N_CONFIG_H
-#define _NBG460N_CONFIG_H
-
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_AR71XX 1
-#define CONFIG_AR91XX 1
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_MIPS_TIMER_FREQ (400000000/2)
-
-/* Cache Configuration */
-#define CONFIG_SYS_DCACHE_SIZE 32768
-#define CONFIG_SYS_ICACHE_SIZE 65536
-#define CONFIG_SYS_CACHELINE_SIZE 32
-/* Cache lock for stack */
-#define CONFIG_SYS_INIT_SP_OFFSET 0x1000
-
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE)
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200}
-
-#define CONFIG_MISC_INIT_R
-
-/* SPI-Flash support */
-#define CONFIG_SPI_FLASH
-#define CONFIG_AR71XX_SPI
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SF_DEFAULT_HZ 25000000
-
-#define CONFIG_ENV_SPI_MAX_HZ 25000000
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_ADDR 0xbfc20000
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_SIZE 0x01000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 64
-#define CONFIG_SYS_FLASH_BASE 0xbfc00000
-
-/* Net support */
-#define CONFIG_ETHADDR_ADDR 0xbfc0fff8
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_AG71XX
-#define CONFIG_AG71XX_PORTS { 1, 1 }
-#define CONFIG_AG71XX_MII0_IIF MII0_CTRL_IF_RGMII
-#define CONFIG_AG71XX_MII1_IIF MII1_CTRL_IF_RGMII
-#define CONFIG_NET_MULTI
-#define CONFIG_IPADDR 192.168.1.254
-#define CONFIG_SERVERIP 192.168.1.42
-
-/* Switch support */
-#define CONFIG_MII
-#define CONFIG_RTL8366_MII
-#define RTL8366_PIN_SDA 16
-#define RTL8366_PIN_SCK 18
-#define MII_GPIOINCLUDE <asm/ar71xx_gpio.h>
-#define MII_SETSDA(x) ar71xx_setpin(RTL8366_PIN_SDA, x)
-#define MII_GETSDA ar71xx_getpin(RTL8366_PIN_SDA)
-#define MII_SETSCK(x) ar71xx_setpin(RTL8366_PIN_SCK, x)
-#define MII_SDAINPUT ar71xx_setpindir(RTL8366_PIN_SDA, 0)
-#define MII_SDAOUTPUT ar71xx_setpindir(RTL8366_PIN_SDA, 1)
-#define MII_SCKINPUT ar71xx_setpindir(RTL8366_PIN_SCK, 0)
-#define MII_SCKOUTPUT ar71xx_setpindir(RTL8366_PIN_SCK, 1)
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 rootfstype==squashfs,jffs2 noinitrd machtype=NBG460N"
-#define CONFIG_BOOTCOMMAND "bootm 0xbfc70000"
-#define CONFIG_LZMA
-
-
-/* Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SPI
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * 0x10000 + 128*1024, 0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CONFIG_SYS_LOAD_ADDR 0x80060000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80000800
-#define CONFIG_SYS_MEMTEST_END 0x81E00000
-
-#endif /* _NBG460N_CONFIG_H */
+++ /dev/null
-diff -ur u-boot-2010.03/cpu/mips/Makefile u-boot-nbg/cpu/mips/Makefile
---- u-boot-2010.03/cpu/mips/Makefile 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/cpu/mips/Makefile 2010-04-15 18:58:01.000000000 +0200
-@@ -33,6 +33,7 @@
- COBJS-$(CONFIG_INCA_IP) += asc_serial.o incaip_clock.o
- COBJS-$(CONFIG_PURPLE) += asc_serial.o
- COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
-+COBJS-$(CONFIG_AR71XX) += ar71xx_serial.o
-
- SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
- OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-diff -ur u-boot-2010.03/Makefile u-boot-nbg/Makefile
---- u-boot-2010.03/Makefile 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/Makefile 2010-04-11 23:31:29.000000000 +0200
-@@ -3455,6 +3455,13 @@
- @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
-
- #########################################################################
-+## MIPS32 AR71XX (24K)
-+#########################################################################
-+
-+nbg460n_550n_550nh_config : unconfig
-+ @$(MKCONFIG) -a nbg460n mips mips nbg460n zyxel
-+
-+#########################################################################
- ## MIPS64 5Kc
- #########################################################################
-
+++ /dev/null
-diff -ur u-boot-2010.03/drivers/spi/Makefile u-boot-nbg/drivers/spi/Makefile
---- u-boot-2010.03/drivers/spi/Makefile 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/drivers/spi/Makefile 2010-04-15 19:31:27.000000000 +0200
-@@ -25,6 +25,7 @@
-
- LIB := $(obj)libspi.a
-
-+COBJS-$(CONFIG_AR71XX_SPI) += ar71xx_spi.o
- COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
- COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
- COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+++ /dev/null
-diff -ur u-boot-2010.03/drivers/net/Makefile u-boot-nbg/drivers/net/Makefile
---- u-boot-2010.03/drivers/net/Makefile 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/drivers/net/Makefile 2010-04-19 23:30:01.000000000 +0200
-@@ -27,6 +27,7 @@
-
- COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
- COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
-+COBJS-$(CONFIG_AG71XX) += ag71xx.o
- COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
- COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
- COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
-diff -ur u-boot-2010.03/include/netdev.h u-boot-nbg/include/netdev.h
---- u-boot-2010.03/include/netdev.h 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/include/netdev.h 2010-05-02 11:30:58.000000000 +0200
-@@ -42,6 +42,7 @@
-
- /* Driver initialization prototypes */
- int au1x00_enet_initialize(bd_t*);
-+int ag71xx_register(bd_t * bis, char *phyname[], u16 phyid[], u16 phyfixed[]);
- int at91emac_register(bd_t *bis, unsigned long iobase);
- int bfin_EMAC_initialize(bd_t *bis);
- int cs8900_initialize(u8 dev_num, int base_addr);
+++ /dev/null
-diff -ur u-boot-2010.03/drivers/net/Makefile u-boot-nbg/drivers/net/Makefile
---- u-boot-2010.03/drivers/net/Makefile 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/drivers/net/Makefile 2010-04-19 23:30:01.000000000 +0200
-@@ -65,6 +65,7 @@
- COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
- COBJS-$(CONFIG_RTL8139) += rtl8139.o
- COBJS-$(CONFIG_RTL8169) += rtl8169.o
-+COBJS-$(CONFIG_RTL8366_MII) += phy/rtl8366_mii.o
- COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
- COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
- COBJS-$(CONFIG_SMC91111) += smc91111.o
-diff -ur u-boot-2010.03/include/netdev.h u-boot-nbg/include/netdev.h
---- u-boot-2010.03/include/netdev.h 2010-03-31 23:54:39.000000000 +0200
-+++ u-boot-nbg/include/netdev.h 2010-05-02 11:30:58.000000000 +0200
-@@ -175,5 +175,13 @@
-
- int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
- #endif /* CONFIG_MV88E61XX_SWITCH */
-+
-+#if defined(CONFIG_RTL8366_MII)
-+#define RTL8366_DEVNAME "rtl8366"
-+#define RTL8366_WANPHY_ID 4
-+#define RTL8366_LANPHY_ID -1
-+int rtl8366_mii_register(bd_t *bis);
-+int rtl8366s_initialize(void);
-+#endif
-
- #endif /* _NETDEV_H_ */
+++ /dev/null
---- a/include/compiler.h
-+++ b/include/compiler.h
-@@ -46,7 +46,7 @@ extern int errno;
- #ifdef __linux__
- # include <endian.h>
- # include <byteswap.h>
--#elif defined(__MACH__)
-+#elif defined(__MACH__) || defined(__FreeBSD__)
- # include <machine/endian.h>
- typedef unsigned long ulong;
- typedef unsigned int uint;
+++ /dev/null
---- a/config.mk
-+++ b/config.mk
-@@ -64,9 +64,17 @@ HOSTSTRIP = strip
- #
-
- ifeq ($(HOSTOS),darwin)
--HOSTCC = cc
--HOSTCFLAGS += -traditional-cpp
--HOSTLDFLAGS += -multiply_defined suppress
-+#get the major and minor product version (e.g. '10' and '6' for Snow Leopard)
-+DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
-+DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
-+
-+before-snow-leopard = $(shell if [ $(DARWIN_MAJOR_VERSION) -le 10 -a \
-+ $(DARWIN_MINOR_VERSION) -le 5 ] ; then echo "$(1)"; else echo "$(2)"; fi ;)
-+
-+# Snow Leopards build environment has no longer restrictions as described above
-+HOSTCC = $(call before-snow-leopard, "cc", "gcc")
-+HOSTCFLAGS += $(call before-snow-leopard, "-traditional-cpp")
-+HOSTLDFLAGS += $(call before-snow-leopard, "-multiply_defined suppress")
- else
- HOSTCC = gcc
- endif
+++ /dev/null
---- a/tools/os_support.c
-+++ b/tools/os_support.c
-@@ -23,6 +23,6 @@
- #ifdef __MINGW32__
- #include "mingw_support.c"
- #endif
--#ifdef __APPLE__
-+#if defined(__APPLE__) && __DARWIN_C_LEVEL < 200809L
- #include "getline.c"
- #endif
---- a/tools/os_support.h
-+++ b/tools/os_support.h
-@@ -28,7 +28,7 @@
- #include "mingw_support.h"
- #endif
-
--#ifdef __APPLE__
-+#if defined(__APPLE__) && __DARWIN_C_LEVEL < 200809L
- #include "getline.h"
- #endif
-
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -139,9 +139,7 @@ endif
-
- # The "tools" are needed early, so put this first
- # Don't include stuff already done in $(LIBS)
--SUBDIRS = tools \
-- examples/standalone \
-- examples/api
-+SUBDIRS = tools
-
- .PHONY : $(SUBDIRS)
-
+++ /dev/null
---- a/include/asm-mips/io.h
-+++ b/include/asm-mips/io.h
-@@ -118,12 +118,12 @@ static inline void set_io_port_base(unsi
- * Change virtual addresses to physical addresses and vv.
- * These are trivial on the 1:1 Linux/MIPS mapping
- */
--extern inline phys_addr_t virt_to_phys(volatile void * address)
-+static inline phys_addr_t virt_to_phys(volatile void * address)
- {
- return CPHYSADDR(address);
- }
-
--extern inline void * phys_to_virt(unsigned long address)
-+static inline void * phys_to_virt(unsigned long address)
- {
- return (void *)KSEG0ADDR(address);
- }
-@@ -131,12 +131,12 @@ extern inline void * phys_to_virt(unsign
- /*
- * IO bus memory addresses are also 1:1 with the physical address
- */
--extern inline unsigned long virt_to_bus(volatile void * address)
-+static inline unsigned long virt_to_bus(volatile void * address)
- {
- return CPHYSADDR(address);
- }
-
--extern inline void * bus_to_virt(unsigned long address)
-+static inline void * bus_to_virt(unsigned long address)
- {
- return (void *)KSEG0ADDR(address);
- }
-@@ -150,12 +150,12 @@ extern unsigned long isa_slot_offset;
- extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
-
- #if 0
--extern inline void *ioremap(unsigned long offset, unsigned long size)
-+static inline void *ioremap(unsigned long offset, unsigned long size)
- {
- return __ioremap(offset, size, _CACHE_UNCACHED);
- }
-
--extern inline void *ioremap_nocache(unsigned long offset, unsigned long size)
-+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
- {
- return __ioremap(offset, size, _CACHE_UNCACHED);
- }
-@@ -238,7 +238,7 @@ out:
- */
-
- #define __OUT1(s) \
--extern inline void __out##s(unsigned int value, unsigned int port) {
-+static inline void __out##s(unsigned int value, unsigned int port) {
-
- #define __OUT2(m) \
- __asm__ __volatile__ ("s" #m "\t%0,%1(%2)"
-@@ -252,7 +252,7 @@ __OUT1(s##c_p) __OUT2(m) : : "r" (__iosw
- SLOW_DOWN_IO; }
-
- #define __IN1(t,s) \
--extern __inline__ t __in##s(unsigned int port) { t _v;
-+static inline t __in##s(unsigned int port) { t _v;
-
- /*
- * Required nops will be inserted by the assembler
-@@ -267,7 +267,7 @@ __IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i
- __IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); }
-
- #define __INS1(s) \
--extern inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
-+static inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
-
- #define __INS2(m) \
- if (count) \
-@@ -295,7 +295,7 @@ __INS1(s##c) __INS2(m) \
- : "$1");}
-
- #define __OUTS1(s) \
--extern inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
-+static inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
-
- #define __OUTS2(m) \
- if (count) \
---- a/include/asm-mips/system.h
-+++ b/include/asm-mips/system.h
-@@ -23,7 +23,7 @@
- #include <linux/kernel.h>
- #endif
-
--extern __inline__ void
-+static inline void
- __sti(void)
- {
- __asm__ __volatile__(
-@@ -47,7 +47,7 @@ __sti(void)
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
--extern __inline__ void
-+static inline void
- __cli(void)
- {
- __asm__ __volatile__(
-@@ -208,7 +208,7 @@ do { \
- * For 32 and 64 bit operands we can take advantage of ll and sc.
- * FIXME: This doesn't work for R3000 machines.
- */
--extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
-+static inline unsigned long xchg_u32(volatile int * m, unsigned long val)
- {
- #ifdef CONFIG_CPU_HAS_LLSC
- unsigned long dummy;
+++ /dev/null
---- a/common/main.c
-+++ b/common/main.c
-@@ -47,8 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Board-specific Platform code can reimplement show_boot_progress () if needed
- */
--void inline __show_boot_progress (int val) {}
--void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-+void __attribute__((weak)) show_boot_progress(int val) {}
-
- #if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY)
- extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* for do_reset() prototype */
include $(TOPDIR)/rules.mk
PKG_NAME:=mkimage
-PKG_VERSION:=2014.10
+PKG_VERSION:=2014.10-librecmc
PKG_SOURCE:=u-boot-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=\
http://mirror2.librecmc.org/sources \
ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=3ddcaee2f05b7c464778112ec83664b5
+PKG_MD5SUM:=a4d242902687a4ee46fe8dabb5c0f12e
PKG_CAT:=bzcat
HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/u-boot-$(PKG_VERSION)
projects / librecmc / librecmc-fossil.git / commitdiff