ARM: omap3: am3517-evm: Add device tree and DM support
authorAdam Ford <aford173@gmail.com>
Wed, 20 Sep 2017 01:32:11 +0000 (20:32 -0500)
committerTom Rini <trini@konsulko.com>
Fri, 29 Sep 2017 18:07:54 +0000 (14:07 -0400)
With the device tree ported from Linux 4.13, this enables
Driver Model and Device Tree support for the am3517-evm

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
arch/arm/mach-omap2/omap3/Kconfig
board/logicpd/am3517evm/am3517evm.c
configs/am3517_evm_defconfig
include/configs/am3517_evm.h

index 11f5f058b9e0c4772da7fd90c06570d16ba070f5..4dbf9a27da8b046a0221dd5d287715e7c305f09d 100644 (file)
@@ -22,6 +22,11 @@ choice
 
 config TARGET_AM3517_EVM
        bool "AM3517 EVM"
+       select DM
+       select DM_SERIAL
+       select DM_GPIO
+       select DM_I2C
+       select DM_MMC
 
 config TARGET_MT_VENTOUX
        bool "TeeJet Mt.Ventoux"
index c18a5a3140b9323ce01535deabc0899d4e95d5d8..29f136a530686c95c553a0d0e05c4f5a436b2f75 100644 (file)
@@ -12,6 +12,8 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <ns16550.h>
 #include <asm/io.h>
 #include <asm/omap_musb.h>
 #include <asm/arch/am35x_def.h>
@@ -34,6 +36,22 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define AM3517_IP_SW_RESET     0x48002598
 #define CPGMACSS_SW_RST                (1 << 1)
+#define PHY_GPIO               30
+
+/* This is only needed until SPL gets OF support */
+#ifdef CONFIG_SPL_BUILD
+static const struct ns16550_platdata am3517_serial = {
+       .base = OMAP34XX_UART3,
+       .reg_shift = 2,
+       .clock = V_NS16550_CLK,
+       .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(am3517_uart) = {
+       "ns16550_serial",
+       &am3517_serial
+};
+#endif
 
 /*
  * Routine: board_init
@@ -113,30 +131,35 @@ int misc_init_r(void)
 
        am3517_evm_musb_init();
 
-       /* activate PHY reset */
-       gpio_direction_output(30, 0);
-       gpio_set_value(30, 0);
-
-       ctr  = 0;
-       do {
-               udelay(1000);
-               ctr++;
-       } while (ctr < 300);
-
-       /* deactivate PHY reset */
-       gpio_set_value(30, 1);
-
-       /* allow the PHY to stabilize and settle down */
-       ctr = 0;
-       do {
-               udelay(1000);
-               ctr++;
-       } while (ctr < 300);
-
-       /* ensure that the module is out of reset */
-       reset = readl(AM3517_IP_SW_RESET);
-       reset &= (~CPGMACSS_SW_RST);
-       writel(reset,AM3517_IP_SW_RESET);
+       if (gpio_request(PHY_GPIO, "gpio_30") == 0) {
+               /* activate PHY reset */
+               gpio_direction_output(PHY_GPIO, 0);
+               gpio_set_value(PHY_GPIO, 0);
+
+               ctr  = 0;
+               do {
+                       udelay(1000);
+                       ctr++;
+               } while (ctr < 300);
+
+               /* deactivate PHY reset */
+               gpio_set_value(PHY_GPIO, 1);
+
+               /* allow the PHY to stabilize and settle down */
+               ctr = 0;
+               do {
+                       udelay(1000);
+                       ctr++;
+               } while (ctr < 300);
+
+               /* ensure that the module is out of reset */
+               reset = readl(AM3517_IP_SW_RESET);
+               reset &= (~CPGMACSS_SW_RST);
+               writel(reset, AM3517_IP_SW_RESET);
+
+               /* Free requested GPIO */
+               gpio_free(PHY_GPIO);
+       }
 
        return 0;
 }
index 920c61c39174185812b121b38cbf9ac40d3b24fd..8ab018656d2ae588a16204495420aadb66d10e9e 100644 (file)
@@ -4,11 +4,14 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SYS_TEXT_BASE=0x80100000
 CONFIG_TI_COMMON_CMD_OPTIONS=y
 # CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_AM3517_EVM=y
 CONFIG_EMIF4=y
+CONFIG_DEFAULT_DEVICE_TREE="am3517-evm"
 CONFIG_BOOTDELAY=10
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_EXT_SUPPORT is not set
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_HUSH_PARSER=y
@@ -27,13 +30,12 @@ CONFIG_CMD_CACHE=y
 # CONFIG_CMD_TIME is not set
 CONFIG_CMD_UBI=y
 CONFIG_SPL_PARTITION_UUIDS=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_STORAGE=y
 # CONFIG_FAT_WRITE is not set
 CONFIG_BCH=y
-CONFIG_OF_LIBFDT=y
index 708a98f8270948e9edbe772528c1520e1e1061ef..adb33a9e3ead9621dd0e3c11ff95efcafc638229 100644 (file)
@@ -21,6 +21,7 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
+
 #define CONFIG_SYS_TEXT_BASE           0x80100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 /* Hardware drivers */
 
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX              3
-#define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
-#define CONFIG_SERIAL3                 3       /* UART3 on AM3517 EVM */
-
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
@@ -72,7 +63,6 @@
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* I2C */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 
 #define CONFIG_SPL_FRAMEWORK
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE           0x40200000
-#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
-                                        CONFIG_SPL_TEXT_BASE)
 
 #undef CONFIG_SPL_BSS_START_ADDR
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000