BOARDNAME:=Generic
-DEFAULT_PACKAGES += wpad-basic-mbedtls
+DEFAULT_PACKAGES += wpad-basic-wolfssl
define Target/Description
Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards.
TPLINK_HWID := 0x5348334c
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
- -uboot-envtools -wpad-basic-mbedtls
+ -uboot-envtools -wpad-basic-wolfssl
SUPPORTED_DEVICES += lan-turtle
endef
TARGET_DEVICES += hak5_lan-turtle
TPLINK_HWID := 0x5351524c
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
- -uboot-envtools -wpad-basic-mbedtls
+ -uboot-envtools -wpad-basic-wolfssl
SUPPORTED_DEVICES += packet-squirrel
endef
TARGET_DEVICES += hak5_packet-squirrel
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := ETG3-R
IMAGE_SIZE := 7680k
- DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic-mbedtls
+ DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic-wolfssl
DEFAULT := n
endef
TARGET_DEVICES += iodata_etg3-r
SOC := ar7161
DEVICE_VENDOR := jjPlus
DEVICE_MODEL := JA76PF2
- DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-basic-mbedtls -uboot-envtools fconfig kmod-hwmon-lm75
+ DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-basic-wolfssl -uboot-envtools fconfig kmod-hwmon-lm75
LOADER_TYPE := bin
LOADER_FLASH_OFFS := 0x60000
COMPILE := loader-$(1).bin
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT300
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut30x
- DEVICE_PACKAGES := -kmod-ath9k -uboot-envtools -wpad-basic-mbedtls kmod-usb2
+ DEVICE_PACKAGES := -kmod-ath9k -uboot-envtools -wpad-basic-wolfssl kmod-usb2
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
FEATURES += nand
-DEFAULT_PACKAGES += wpad-basic-mbedtls
+DEFAULT_PACKAGES += wpad-basic-wolfssl
define Target/Description
Firmware for boards using Qualcomm Atheros, MIPS-based SoCs
BOARDNAME:=Devices with small flash
FEATURES += low_mem small_flash
-DEFAULT_PACKAGES += wpad-basic-mbedtls
+DEFAULT_PACKAGES += wpad-basic-wolfssl
define Target/Description
Build firmware images for Atheros AR71xx/AR913x/AR934x based boards with small flash
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
DEVICE_PACKAGES := \
mkf2fs e2fsprogs kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
- wpad-basic-mbedtls kmod-ath9k partx-utils kmod-i2c-mux-pca954x \
+ wpad-basic-wolfssl kmod-ath9k partx-utils kmod-i2c-mux-pca954x \
kmod-leds-turris-omnia
IMAGES := $$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz omnia-medkit-$$(DEVICE_IMG_PREFIX)-initramfs.tar.gz
IMAGE/$$(DEVICE_IMG_PREFIX)-sysupgrade.img.gz := boot-scr | boot-img | sdcard-img | gzip | append-metadata
define Device/linksys
$(Device/NAND-128K)
DEVICE_VENDOR := Linksys
- DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-mbedtls
+ DEVICE_PACKAGES := kmod-mwlwifi wpad-basic-wolfssl
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi M1 Plus
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
- cypress-firmware-43430-sdio wpad-basic-mbedtls
+ cypress-firmware-43430-sdio wpad-basic-wolfssl
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-m1-plus
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO Air
DEVICE_PACKAGES := kmod-leds-gpio kmod-brcmfmac \
- brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
+ brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-neo-air
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R1
DEVICE_PACKAGES := kmod-usb-net-rtl8152 kmod-leds-gpio \
- kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
+ kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-wolfssl
SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-r1
DEVICE_MODEL := Lamobo R1
DEVICE_ALT0_VENDOR := Bananapi
DEVICE_ALT0_MODEL := BPi-R1
- DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-mbedtls
+ DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-wolfssl
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
SOC := sun7i-a20
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2 Berry
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
- cypress-firmware-43430-sdio wpad-basic-mbedtls
+ cypress-firmware-43430-sdio wpad-basic-wolfssl
SUPPORTED_DEVICES:=lemaker,bananapi-m2-berry
SOC := sun8i-v40
endef
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2 Ultra
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
- brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
+ brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
SUPPORTED_DEVICES:=lemaker,bananapi-m2-ultra
SOC := sun8i-r40
endef
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2+
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
- brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
+ brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
SOC := sun8i-h3
endef
TARGET_DEVICES += sinovoip_bananapi-m2-plus
kmod-sun4i-emac \
rtl8188eu-firmware \
swconfig \
- wpad-basic-mbedtls
+ wpad-basic-wolfssl
PRIORITY := 1
endef
include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += wpad-basic-mbedtls kmod-mac80211-hwsim mkf2fs e2fsprogs
+DEFAULT_PACKAGES += wpad-basic-wolfssl kmod-mac80211-hwsim mkf2fs e2fsprogs
endif
endif