+commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Fri Mar 13 11:40:10 2009 -0400
+
+ mpc83xx: Add bank configuration to FSL spd_sdram.c
+
+ The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
+ bank SDRAMs.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
+Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+Date: Fri Mar 13 08:58:14 2009 +0100
+
+ mpc83xx: correctly set encryption and I2C bus 0 clock
+
+ This patch makes sure the correct mask is applied when setting
+ the encryption and I2C bus 0 clock in SCCR.
+ Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
+ won't function.
+
+ Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Mar 12 19:30:50 2009 +0100
+
+ OMAP3: Add support for OMAP3 die ID
+
+ Read and store OMAP3 die ID in U-Boot environment.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Wed Mar 11 15:08:56 2009 -0400
+
+ MPC5200 FEC MII speed register
+
+ Set a non-zero speed in the MII register so that MII commands will work.
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+
+commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
+Author: Yusuke.Goda <goda.yusuke@renesas.com>
+Date: Fri Mar 13 16:08:18 2009 +0900
+
+ sh: ap325rxa: Change the wait cycle in the area 5
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 16:04:26 2009 +0900
+
+ sh: Fix cannot work rtl8139 on r2dplus
+
+ The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
+ registration.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Feb 27 18:35:41 2009 +0900
+
+ sh: Add netdev header fixing of warning/build
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ada9318252f51c2626e9837c623f9812b0308dea
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Mar 3 15:11:17 2009 +0900
+
+ sh: Add support 32-Bit Extended Address Mode to sh7785lcr
+
+ We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
+ for this mode. This command changes PMB for using 512MB system memory.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:42 2009 +0900
+
+ sh: Add some register value configurable to PCI of SH7780
+
+ Some register value was hardcoded for System memory size 128MB and
+ memory offset 0x08000000. This patch fixed the problem.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:52 2009 +0900
+
+ sh: Add system memory registration to PCI for SH4
+
+ It is necessary for some pci device driver.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b3061b40db691245a7bb9a55354b4edacbf3902d
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:55 2009 +0900
+
+ sh: Add value for PCI system memory registration of sh7785lcr
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6d84ae3956a6cd7aebd86f661130752594e60124
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Mar 3 15:11:08 2009 +0900
+
+ sh: Add macros for SH-4A 32-Bit Address Extended Mode
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Feb 3 13:35:05 2009 +0900
+
+ sh: use write{8,16,32} in ms7720se lowlevel_init
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Mon Mar 9 18:07:53 2009 -0500
+
+ tsec: report when there is no vendor specific PHY support
+
+ Commit af1c2b84 added a generic phy support, with an ID of zero
+ and a 32 bit mask; meaning that it will match on any PHY ID.
+
+ The problem is that there is a test that checked if a matching
+ PHY was found, and if not, it printed the non-matching ID.
+ But since there will always be a match (on the generic PHY,
+ worst case), this test will never trip.
+
+ In the case of a misconfigured PHY address, or of a PHY that
+ isn't explicitly supported outside of the generic support,
+ you will never see the ID of 0xffffffff, or the ID of the
+ real (but unsupported) chip. It will silently fall through
+ onto the generic support.
+
+ This change makes that test useful again, and ensures that
+ the selection of generic PHY support doesn't happen without
+ some sort of notice. It also makes it explicitly clear that
+ the generic PHY must be last in the PHY table.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit c279dfc10186ceba78d3862036f158750e86599a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 9 10:53:05 2009 +0100
+
+ SIMPC8313 board: fix out of tree building.
+
+ Fix typo in makefile which broke out of tree builds.
+
+ Also use expolicit "rm" instead of "ln -sf" which is known to be
+ unreliable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49b5aff491bd574935ecaf8545152066a25eff3d
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Mon Feb 23 10:53:13 2009 -0800
+
+ Add eTSEC 1/2 IO override control (corrected)
+
+ This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Mar 6 19:05:52 2009 -0600
+
+ fsl: Remove unnecessary debug printfs
+
+ These were left in accidentally, and are not really useful unless the
+ code is as broken as it was when it was being developed.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Feb 24 02:37:59 2009 -0600
+
+ Fix mpc85xx ddr-gen3 ddr_sdram_cfg.
+
+ Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
+ sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit a922fdb87af25c25c032424908dcf60fbf3250ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Feb 24 06:13:10 2009 +0100
+
+ PXA: timer use do_div and simplify it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 9 10:51:39 2009 +0100
+
+ SIMPC8313 board: fix out of tree building.
+
+ Fix typo in makefile which broke out of tree builds.
+
+ Also use expolicit "rm" instead of "ln -sf" which is known to be
+ unreliable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:51 2009 +0100
+
+ 8360, kmeter1: added bootcount feature.
+
+ add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.
+
+ The bootcounter uses 8 bytes from the muram,
+ because no other memory was found on this
+ CPU for the bootcount feature. So we must
+ correct the muram size in DTS before booting
+ Linux.
+
+ This feature is actual only implemented for
+ MPC8360, because not all 83xx CPU have qe,
+ and therefore no muram, which this feature
+ uses.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1e7ed2565031e01abc18c713030a0a9829c07684
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:48 2009 +0100
+
+ 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
+
+ old code implemented the QE_ENET10 errata only for Silicon
+ Revision 2.0. New code reads now the Silicon Revision
+ register and sets dependend on the Silicon Revision the
+ values as advised in the QE_ENET10 errata.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 605f78e34a3f0103693b891f2573edd352e7d495
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:44 2009 +0100
+
+ 83xx, kmeter1: updates for 2009.03
+
+ - HRCW update
+ HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
+ HRCWH_LALE_EARLY added
+ - DDR-SDRAM settings modified. This solves sporadically
+ problems with this memory.
+ - CS1 now 128 MB window size
+ - CS3 now 512 MB window size
+ - PRAM activated
+ - MTDPARTS_DEFAULT defined
+ - CONFIG_HOSTNAME added
+ - MONITOR_LEN now 384 KB
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 118cbe3c35c898f8d020b29d6dc180307cacf147
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:40 2009 +0100
+
+ 83xx, kmeter1: autodetect size of DDR II RAM
+
+ it is possible that some board variants have different DDR II
+ RAM sizes. So we autodetect the size of the assembled RAM.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:37 2009 +0100
+
+ 83xx, i2c: add mux support for fsl_i2c
+
+ This patch adds I2C mux support for the fsl_i2c driver. This
+ allows you to add "new" i2c busses, which are reached over
+ i2c muxes. For more infos, please look in the README and
+ search for CONFIG_I2C_MUX.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:34 2009 +0100
+
+ 83xx, kmeter1: add I2C, dtt, eeprom support
+
+ This patch adds I2C support for the Keymile kmeter1 board.
+ It uses the First I2C Controller from the CPU, for
+ accessing 4 temperature sensors, an eeprom with IVM data
+ and the booteeprom over a pca9547 mux.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit db1d72afd77287bc8577210f3f71ab249dcf146f
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:30 2009 +0100
+
+ i2c, dtt: move dtt_init () to board_init_r ()
+
+ In case where a board not uses CONFIG_POST, it is not
+ necessary to init the DTTs when running from flash.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b0055547f0246908b79cc300170d87380b69e18
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Feb 25 12:31:32 2009 +0800
+
+ 83xx: Fix some bugs in spd sdram code
+
+ 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
+ tRTP according to DDR2 JEDEC spec.
+ 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
+ 3. add the support of DDR2-533,667,800 DIMMs
+ 4. cpo
+ 5. make the AL to min to gain better performance.
+
+ The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
+ MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.
+
+ items 1, 2 and 5:
+ Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+ Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b7be63abec45858c044f0fbd6aeef524c4663f9b
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Wed Feb 4 18:27:49 2009 +0200
+
+ MPC8349ITX: several config issues fixed
+
+ The previous version rebooted forever with DDR bigger than 256MB.
+ Access the DS1339 RTC chip is on I2C1 bus.
+ Allow DHCP.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:39 2009 +0300
+
+ mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
+
+ The SerDes initialization should be finished before negating the reset
+ signal according to the reference manual. This isn't an issue on real
+ hardware, but we'd better stick to the specifications anyway.
+
+ Suggested-by: Liu Dave <DaveLiu@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Feb 25 12:28:32 2009 +0100
+
+ i2c, dtt: move dtt_init () to board_init_r ()
+
+ it is not necessary to init the DTTs so early,
+ so move this init to board_init_r ().
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 00cc5595a7caac8066b408774383a956c2e26797
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Feb 25 20:28:13 2009 +0100
+
+ lcd: Fix compilation warning in common/lcd.c
+
+ Fix following warning while compilation for mcc200 board:
+
+ lcd.c: In function 'lcd_display_bitmap':
+ lcd.c:625: warning: unused variable 'cmap'
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:11:24 2009 +1100
+
+ Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)
+
+ Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 23 10:29:47 2009 -0500
+
+ smc911x: split out useful defines/functions into local header
+
+ The smc911x driver has a lot of useful defines/functions which can be used
+ by pieces of code (such as example eeprom programmers). Rather than
+ forcing each place to duplicate these defines/functions, split them out
+ of the smdc911x driver into a local header.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+ CC: Guennadi Liakhovetski <lg@denx.de>
+ CC: Magnus Lilja <lilja.magnus@gmail.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Feb 24 10:44:02 2009 +0100
+
+ ARM: add an "eet" variant of the imx31_phycore board
+
+ The "eet" variant of the imx31_phycore board has an OLED display, using a
+ s6e63d6 display controller on the first SPI interface, using GPIO57 as a
+ chip-select for it. With this configuration you can display 256 colour BMP
+ images in 16-bit RGB (RGB565) LCD mode.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:57 2009 +0100
+
+ video: add an i.MX31 framebuffer driver
+
+ Add a driver for the Synchronous Display Controller and the Display
+ Interface on i.MX31, using IPU for DMA channel setup. So far only
+ displaying of bitmaps is supported, no text output.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit b245e65ee3c4cce3ccf008a21f4528239655876c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:53 2009 +0100
+
+ LCD: support 8bpp BMPs on 16bpp displays
+
+ This patch also simplifies some ifdefs in lcd.c, introduces a generic
+ vidinfo_t, which new drivers are encouraged to use and old drivers to switch
+ over to.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Feb 6 10:37:49 2009 +0100
+
+ Add 16bpp BMP support
+
+ This patch adds 16bpp BMP support to the common lcd code.
+
+ Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.
+
+ At the moment it's only been tested on the MIMC200 AVR32 board, but extending
+ this to other platforms should be a simple task !!
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit 689551c5ff1b394b88412f3df22144e79468d3a9
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:41 2009 +0100
+
+ A driver for the S6E63D6 SPI display controller from Samsung
+
+ This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
+ It only provides access to controller's registers so the client can freely
+ configure it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 13 09:26:40 2009 +0100
+
+ i.MX31: support GPIO as a chip-select in the mxc_spi driver
+
+ Some SPI devices have special requirements on chip-select handling.
+ With this patch we can use a GPIO as a chip-select and strictly follow
+ the SPI_XFER_BEGIN and SPI_XFER_END flags.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b30de3cccf8867566cd314e7c7033904afa5dc9d
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sat Feb 7 01:18:07 2009 +0100
+
+ i.MX31: add a simple gpio driver
+
+ This is a minimal driver, so far only managing output. It will
+ be used by the mxc_spi.c driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sat Feb 7 00:09:12 2009 +0100
+
+ i.MX31: fix SPI driver for shorter than 32 bit
+
+ Fix setting the SPI Control register, 8 and 16-bit transfers
+ and a wrong pointer in the free routine in the mxc_spi driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:52 2009 +0300
+
+ mpc83xx: MPC837XERDB: Add PCIe support
+
+ On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
+ slots. Let's support them.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:50 2009 +0300
+
+ mpc83xx: PCI: Fix hard-coded first_busno value
+
+ We should use pci_last_busno() in pci_init_bus(), otherwise we'll
+ erroneously re-use PCI0's first_busno for PCI1 hoses.
+
+ NOTE: The patch is untested. All MPC83xx FSL boards I have have
+ PCI1 in miniPCI form, for which I don't have any cards handy.
+
+ But looking in cpu/mpc85xx/pci.c:
+ ...
+ #ifdef CONFIG_MPC85XX_PCI2
+ hose = &pci_hose[1];
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+
+ And considering that we do the same for MPC83xx PCI-E support,
+ I think this patch is correct.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:46 2009 +0300
+
+ mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
+
+ This patch fixes copy-paste issue: pci_hose[0]'s first and last
+ busnos were used to fixup pci1's nodes.
+
+ We don't see this bug triggering only because Linux reenumerate
+ buses anyway.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b24a99f6666ac278ec9f9c1334518af828833d19
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:44 2009 +0300
+
+ mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
+
+ This patch fixes an issue in config space read accessors: we should
+ fill-in the value even if we fail (e.g. skipping devices), otherwise
+ CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:42 2009 +0300
+
+ mpc83xx: PCIe: Don't start bus enumeration at 0
+
+ Currently we assign first_busno = 0 for the first PCIe hose, but this
+ scheme won't work if we have ordinary PCI hose already registered (its
+ first_busno value is 0 too).
+
+ The old code worked fine only because we have PCI disabled on
+ MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
+ "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
+ But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
+ triggers.
+
+ So, to fix the issue, we should use pci_last_busno() + 1 for the
+ first_busno (i.e. last available busno).
+
+ Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc2a8c7751ddbae3116660064f446888538b93e9
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:41 2009 +0300
+
+ PCI: Add pci_last_busno() helper
+
+ This is just a handy routine that reports last PCI busno: we walk
+ down all the hoses and return last hose's last_busno.
+
+ Will be used by PCI/PCIe initialization code.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 23 13:56:51 2009 -0600
+
+ MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
+
+ Currently, we get 256MB as the default, but since all the 86xx
+ board configs define a 2G BAT mapping for RAM, raise default
+ to 2G.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Thu Feb 12 10:43:32 2009 -0600
+
+ mpc8641hpcn: Indicate 36-bit addr map in boot messages
+
+ If 36-bit addressing is enabled, print a message on the console
+ when we boot.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:38:52 2009 +0100
+
+ netloop: speed up NetLoop
+
+ NetLoop polls every cycle with getenv some environment variables.
+ This is horribly slow, especially when the environment is big.
+
+ This patch reads only the environment variables in NetLoop,
+ when they were changed.
+
+ Also moved the init part of the NetLoop function in a seperate
+ function.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Dec 22 02:56:07 2008 -0500
+
+ smc911x_eeprom: new example app for managing newer SMC parts
+
+ A forward port of the last version to work with the newer smc911x driver.
+ I only have a board with a LAN9218 part on it, so that is the only one
+ I've tested. But there isn't anything in this that would make it terribly
+ chip specific afaik.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+ CC: Guennadi Liakhovetski <lg@denx.de>
+ CC: Magnus Lilja <lilja.magnus@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
+Author: Pieter Henning <phenning@vastech.co.za>
+Date: Sun Feb 22 23:17:15 2009 -0800
+
+ Added Vitesse VSC8211 definitions to TSEC driver
+
+ Added the struct containing PHY settings for the Vitesse VSC8211 phy to
+ the phy_info list in tsec.c
+
+ Signed-off-by: Pieter Henning <phenning@vastech.co.za>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 32688e572ff96715b41420e9a7f280db6c399b65
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Feb 23 00:22:21 2009 +0100
+
+ Update CHANGELOG; Prepare 2009.03-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 80b827c2b78329c6503b271e43d9eb693d644710
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Feb 22 23:45:40 2009 +0100
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Feb 11 19:26:15 2009 +0100
+
+ 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Thu Feb 5 14:35:21 2009 +0200
+
+ mpc8349itx: allow SATA boot from the onboard SIL1334
+
+ This patch allows using of SATA devices connected
+ to the onboard PCI SIL1334 SATA controller.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit e1ac387f4645499746856adc1aeaa9787da2eca6
Author: Andy Fleming <afleming@freescale.com>
Date: Thu Oct 30 16:50:14 2008 -0500
projects / oweals / u-boot.git / commitdiff