watchdog: Kconfig: Sort entry alphabetically

To make adding new entry easier, sort Kconfig entries in
alphabetical order.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b01dbc446dfa1e351e6b19656efa9c6ed87666a2..7a8619f05cee22cd92cbce358e3b37dd32494c65 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -26,6 +26,13 @@ config BCM2835_WDT
          This provides basic infrastructure to support BCM2835/2836 watchdog
          hardware, with a max timeout of ~15secs.
 
+config IMX_WATCHDOG
+       bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
+       select HW_WATCHDOG
+       help
+          Select this to enable the IMX and LSCH2 of Layerscape watchdog
+          driver.
+
 config OMAP_WATCHDOG
        bool "TI OMAP watchdog driver"
        depends on ARCH_OMAP2PLUS
@@ -59,14 +66,6 @@ config WDT
          What exactly happens when the timer expires is up to a particular
          device/driver.
 
-config WDT_SANDBOX
-       bool "Enable Watchdog Timer support for Sandbox"
-       depends on SANDBOX && WDT
-       help
-         Enable Watchdog Timer support in Sandbox. This is a dummy device that
-         can be probed and supports all of the methods of WDT, but does not
-         really do anything.
-
 config WDT_ARMADA_37XX
        bool "Marvell Armada 37xx watchdog timer support"
        depends on WDT && ARMADA_3700
@@ -87,6 +86,13 @@ config WDT_ASPEED
          It currently does not support Boot Flash Addressing Mode Detection or
          Second Boot.
 
+config WDT_AT91
+       bool "AT91 watchdog timer support"
+       depends on WDT
+       help
+          Select this to enable Microchip watchdog timer, which can be found on
+          some AT91 devices.
+
 config WDT_BCM6345
        bool "BCM6345 watchdog timer support"
        depends on WDT && (ARCH_BMIPS || ARCH_BCM6858 || ARCH_BCM63158)
@@ -95,21 +101,6 @@ config WDT_BCM6345
          The watchdog timer is stopped when initialized.
          It performs full SoC reset.
 
-config WDT_ORION
-       bool "Orion watchdog timer support"
-       depends on WDT
-       select CLK
-       help
-          Select this to enable Orion watchdog timer, which can be found on some
-          Marvell Armada chips.
-
-config WDT_SP805
-       bool "SP805 watchdog timer support"
-       depends on WDT
-       help
-          Select this to enable SP805 watchdog timer, which can be found on some
-          nxp layerscape chips.
-
 config WDT_CDNS
        bool "Cadence watchdog timer support"
        depends on WDT
@@ -118,6 +109,20 @@ config WDT_CDNS
           Select this to enable Cadence watchdog timer, which can be found on some
           Xilinx Microzed Platform.
 
+config WDT_MPC8xx
+       bool "MPC8xx watchdog timer support"
+       depends on WDT && MPC8xx
+       select CONFIG_MPC8xx_WATCHDOG
+       help
+          Select this to enable mpc8xx watchdog timer
+
+config WDT_MT7621
+       bool "MediaTek MT7621 watchdog timer support"
+       depends on WDT && SOC_MT7628
+       help
+          Select this to enable Ralink / Mediatek watchdog timer,
+          which can be found on some MediaTek chips.
+
 config WDT_MTK
        bool "MediaTek watchdog timer support"
        depends on WDT && ARCH_MEDIATEK
@@ -126,39 +131,35 @@ config WDT_MTK
          The watchdog timer is stopped when initialized.
          It performs full SoC reset.
 
-config XILINX_TB_WATCHDOG
-       bool "Xilinx Axi watchdog timer support"
+config WDT_ORION
+       bool "Orion watchdog timer support"
        depends on WDT
-       imply WATCHDOG
+       select CLK
        help
-          Select this to enable Xilinx Axi watchdog timer, which can be found on some
-          Xilinx Microblaze Platforms.
+          Select this to enable Orion watchdog timer, which can be found on some
+          Marvell Armada chips.
 
-config IMX_WATCHDOG
-       bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
-       select HW_WATCHDOG
+config WDT_SANDBOX
+       bool "Enable Watchdog Timer support for Sandbox"
+       depends on SANDBOX && WDT
        help
-          Select this to enable the IMX and LSCH2 of Layerscape watchdog
-          driver.
+         Enable Watchdog Timer support in Sandbox. This is a dummy device that
+         can be probed and supports all of the methods of WDT, but does not
+         really do anything.
 
-config WDT_AT91
-       bool "AT91 watchdog timer support"
+config WDT_SP805
+       bool "SP805 watchdog timer support"
        depends on WDT
        help
-          Select this to enable Microchip watchdog timer, which can be found on
-          some AT91 devices.
-
-config WDT_MT7621
-       bool "MediaTek MT7621 watchdog timer support"
-       depends on WDT && SOC_MT7628
-       help
-          Select this to enable Ralink / Mediatek watchdog timer,
-          which can be found on some MediaTek chips.
+          Select this to enable SP805 watchdog timer, which can be found on some
+          nxp layerscape chips.
 
-config WDT_MPC8xx
-       bool "MPC8xx watchdog timer support"
-       depends on WDT && MPC8xx
+config XILINX_TB_WATCHDOG
+       bool "Xilinx Axi watchdog timer support"
+       depends on WDT
+       imply WATCHDOG
        help
-          Select this to enable mpc8xx watchdog timer
+          Select this to enable Xilinx Axi watchdog timer, which can be found on some
+          Xilinx Microblaze Platforms.
 
 endmenu