Move ipb_clk and pci_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
{126, 128}
};
- ipb = gd->ipb_clk;
+ ipb = gd->arch.ipb_clk;
for (i = 7; i >= 0; i--) {
for (j = 7; j >= 0; j--) {
scl = 2 * (scltap[j].scl2tap +
psdma->PtdCntrl |= 1;
/* Init timings : we use PIO mode 0 timings */
- period = 1000000000 / gd->ipb_clk; /* period in ns */
+ period = 1000000000 / gd->arch.ipb_clk; /* period in ns */
t0 = CALC_TIMING (600);
t2_8 = CALC_TIMING (290);
/* select clock sources */
psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
psc->sicr = 0;
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
unsigned long baseclk, div;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* set up UART divisor */
div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
val = *(vu_long *)MPC5XXX_CDM_CFG;
if (val & (1 << 8)) {
- gd->ipb_clk = gd->bus_clk / 2;
+ gd->arch.ipb_clk = gd->bus_clk / 2;
} else {
- gd->ipb_clk = gd->bus_clk;
+ gd->arch.ipb_clk = gd->bus_clk;
}
switch (val & 3) {
- case 0: gd->pci_clk = gd->ipb_clk; break;
- case 1: gd->pci_clk = gd->ipb_clk / 2; break;
- default: gd->pci_clk = gd->bus_clk / 4; break;
+ case 0:
+ gd->pci_clk = gd->arch.ipb_clk;
+ break;
+ case 1:
+ gd->pci_clk = gd->arch.ipb_clk / 2;
+ break;
+ default:
+ gd->pci_clk = gd->bus_clk / 4;
+ break;
}
return (0);
printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->ipb_clk),
+ strmhz(buf2, gd->arch.ipb_clk),
strmhz(buf3, gd->pci_clk)
);
return (0);
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
*/
- /* tbd - rtm */
- /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
- /* No MII for 7-wire mode */
+ /*
+ * tbd - rtm
+ * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
+ * No MII for 7-wire mode
+ */
fec->eth->mii_speed = 0x00000030;
}
#if defined(CONFIG_E500)
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
+#if defined(CONFIG_MPC5xxx)
+ unsigned long ipb_clk;
+#endif
};
/*
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
-#if defined(CONFIG_MPC5xxx)
- unsigned long ipb_clk;
-#endif
#if defined(CONFIG_MPC512X)
u32 ips_clk;
u32 csb_clk;
bd->bi_ipsfreq = gd->ips_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC5xxx)
- bd->bi_ipbfreq = gd->ipb_clk;
+ bd->bi_ipbfreq = gd->arch.ipb_clk;
bd->bi_pcifreq = gd->pci_clk;
#endif /* CONFIG_MPC5xxx */
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
/* select clock sources */
out_be16(&psc->psc_clock_select, 0);
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
out_be32(&psc->sicr, 0);
{
volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
- const u32 prescale = gd->ipb_clk / freq / 128;
+ const u32 prescale = gd->arch.ipb_clk / freq / 128;
const u32 count = 128;
const u32 width = 64;
freq = simple_strtol(argv[0], NULL, 0);
/* avoid zero prescale in buzzer_turn_on() */
- if (freq > gd->ipb_clk / 128) {
+ if (freq > gd->arch.ipb_clk / 128) {
printf("%dHz exceeds maximum (%ldHz)\n", freq,
- gd->ipb_clk / 128);
+ gd->arch.ipb_clk / 128);
} else if (!freq)
printf("Zero frequency is senseless\n");
else
/* select clock sources */
psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
+ baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
psc->sicr = 0;
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
if (fec->xcv_type != SEVENWIRE) {
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
#if (DEBUG & 0x3)
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
* and do not drop the Preamble.
+ * No MII for 7-wire mode
*/
- fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
}
dev->priv = (void *)fec;