obj-y += cpu.o
obj-y += iobp.o
obj-y += pch.o
+obj-y += pinctrl_broadwell.o
--- /dev/null
+/*
+ * Copyright (C) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <pch.h>
+#include <pci.h>
+#include <asm/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/gpio.h>
+#include <dt-bindings/gpio/x86-gpio.h>
+#include <dm/pinctrl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ MAX_GPIOS = 95,
+};
+
+#define PIRQ_SHIFT 16
+#define CONF_MASK 0xffff
+
+struct pin_info {
+ int node;
+ int phandle;
+ bool mode_gpio;
+ bool dir_input;
+ bool invert;
+ bool trigger_level;
+ bool output_high;
+ bool sense_disable;
+ bool owner_gpio;
+ bool route_smi;
+ bool irq_enable;
+ bool reset_rsmrst;
+ bool pirq_apic_route;
+};
+
+static int broadwell_pinctrl_read_configs(struct udevice *dev,
+ struct pin_info *conf, int max_pins)
+{
+ const void *blob = gd->fdt_blob;
+ int count = 0;
+ int node;
+
+ debug("%s: starting\n", __func__);
+ for (node = fdt_first_subnode(blob, dev->of_offset);
+ node > 0;
+ node = fdt_next_subnode(blob, node)) {
+ int phandle = fdt_get_phandle(blob, node);
+
+ if (!phandle)
+ continue;
+ if (count == max_pins)
+ return -ENOSPC;
+
+ /* We've found a new configuration */
+ memset(conf, '\0', sizeof(*conf));
+ conf->node = node;
+ conf->phandle = phandle;
+ conf->mode_gpio = fdtdec_get_bool(blob, node, "mode-gpio");
+ if (fdtdec_get_int(blob, node, "direction", -1) == PIN_INPUT)
+ conf->dir_input = true;
+ conf->invert = fdtdec_get_bool(blob, node, "invert");
+ if (fdtdec_get_int(blob, node, "trigger", -1) == TRIGGER_LEVEL)
+ conf->trigger_level = true;
+ if (fdtdec_get_int(blob, node, "output-value", -1) == 1)
+ conf->output_high = true;
+ conf->sense_disable = fdtdec_get_bool(blob, node,
+ "sense-disable");
+ if (fdtdec_get_int(blob, node, "owner", -1) == OWNER_GPIO)
+ conf->owner_gpio = true;
+ if (fdtdec_get_int(blob, node, "route", -1) == ROUTE_SMI)
+ conf->route_smi = true;
+ conf->irq_enable = fdtdec_get_bool(blob, node, "irq-enable");
+ conf->reset_rsmrst = fdtdec_get_bool(blob, node,
+ "reset-rsmrst");
+ if (fdtdec_get_int(blob, node, "pirq-apic", -1) ==
+ PIRQ_APIC_ROUTE)
+ conf->pirq_apic_route = true;
+ debug("config: phandle=%d\n", phandle);
+ count++;
+ conf++;
+ }
+ debug("%s: Found %d configurations\n", __func__, count);
+
+ return count;
+}
+
+static int broadwell_pinctrl_lookup_phandle(struct pin_info *conf,
+ int conf_count, int phandle)
+{
+ int i;
+
+ for (i = 0; i < conf_count; i++) {
+ if (conf[i].phandle == phandle)
+ return i;
+ }
+
+ return -ENOENT;
+}
+
+static int broadwell_pinctrl_read_pins(struct udevice *dev,
+ struct pin_info *conf, int conf_count, int gpio_conf[],
+ int num_gpios)
+{
+ const void *blob = gd->fdt_blob;
+ int count = 0;
+ int node;
+
+ for (node = fdt_first_subnode(blob, dev->of_offset);
+ node > 0;
+ node = fdt_next_subnode(blob, node)) {
+ int len, i;
+ const u32 *prop = fdt_getprop(blob, node, "config", &len);
+
+ if (!prop)
+ continue;
+
+ /* There are three cells per pin */
+ count = len / (sizeof(u32) * 3);
+ debug("Found %d GPIOs to configure\n", count);
+ for (i = 0; i < count; i++) {
+ uint gpio = fdt32_to_cpu(prop[i * 3]);
+ uint phandle = fdt32_to_cpu(prop[i * 3 + 1]);
+ int val;
+
+ if (gpio >= num_gpios) {
+ debug("%s: GPIO %d out of range\n", __func__,
+ gpio);
+ return -EDOM;
+ }
+ val = broadwell_pinctrl_lookup_phandle(conf, conf_count,
+ phandle);
+ if (val < 0) {
+ debug("%s: Cannot find phandle %d\n", __func__,
+ phandle);
+ return -EINVAL;
+ }
+ gpio_conf[gpio] = val |
+ fdt32_to_cpu(prop[i * 3 + 2]) << PIRQ_SHIFT;
+ }
+ }
+
+ return 0;
+}
+
+static void broadwell_pinctrl_commit(struct pch_lp_gpio_regs *regs,
+ struct pin_info *pin_info,
+ int gpio_conf[], int count)
+{
+ u32 owner_gpio[GPIO_BANKS] = {0};
+ u32 route_smi[GPIO_BANKS] = {0};
+ u32 irq_enable[GPIO_BANKS] = {0};
+ u32 reset_rsmrst[GPIO_BANKS] = {0};
+ u32 pirq2apic = 0;
+ int set, bit, gpio = 0;
+
+ for (gpio = 0; gpio < MAX_GPIOS; gpio++) {
+ int confnum = gpio_conf[gpio] & CONF_MASK;
+ struct pin_info *pin = &pin_info[confnum];
+ u32 val;
+
+ val = pin->mode_gpio << CONFA_MODE_SHIFT |
+ pin->dir_input << CONFA_DIR_SHIFT |
+ pin->invert << CONFA_INVERT_SHIFT |
+ pin->trigger_level << CONFA_TRIGGER_SHIFT |
+ pin->output_high << CONFA_OUTPUT_SHIFT;
+ outl(val, ®s->config[gpio].conf_a);
+ outl(pin->sense_disable << CONFB_SENSE_SHIFT,
+ ®s->config[gpio].conf_b);
+
+ /* Determine set and bit based on GPIO number */
+ set = gpio / GPIO_PER_BANK;
+ bit = gpio % GPIO_PER_BANK;
+
+ /* Apply settings to set specific bits */
+ owner_gpio[set] |= pin->owner_gpio << bit;
+ route_smi[set] |= pin->route_smi << bit;
+ irq_enable[set] |= pin->irq_enable << bit;
+ reset_rsmrst[set] |= pin->reset_rsmrst << bit;
+
+ /* PIRQ to IO-APIC map */
+ if (pin->pirq_apic_route)
+ pirq2apic |= gpio_conf[gpio] >> PIRQ_SHIFT;
+ debug("gpio %d: conf %d, mode_gpio %d, dir_input %d, output_high %d\n",
+ gpio, confnum, pin->mode_gpio, pin->dir_input,
+ pin->output_high);
+ }
+
+ for (set = 0; set < GPIO_BANKS; set++) {
+ outl(owner_gpio[set], ®s->own[set]);
+ outl(route_smi[set], ®s->gpi_route[set]);
+ outl(irq_enable[set], ®s->gpi_ie[set]);
+ outl(reset_rsmrst[set], ®s->rst_sel[set]);
+ }
+
+ outl(pirq2apic, ®s->pirq_to_ioxapic);
+}
+
+static int broadwell_pinctrl_probe(struct udevice *dev)
+{
+ struct pch_lp_gpio_regs *regs;
+ struct pin_info conf[12];
+ int gpio_conf[MAX_GPIOS];
+ struct udevice *pch;
+ int conf_count;
+ u32 gpiobase;
+ int ret;
+
+ ret = uclass_first_device(UCLASS_PCH, &pch);
+ if (ret)
+ return ret;
+ if (!pch)
+ return -ENODEV;
+ debug("%s: start\n", __func__);
+
+ /* Only init once, before relocation */
+ if (gd->flags & GD_FLG_RELOC)
+ return 0;
+
+ /*
+ * Get the memory/io base address to configure every pins.
+ * IOBASE is used to configure the mode/pads
+ * GPIOBASE is used to configure the direction and default value
+ */
+ ret = pch_get_gpio_base(pch, &gpiobase);
+ if (ret) {
+ debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
+ gpiobase);
+ return -EINVAL;
+ }
+
+ conf_count = broadwell_pinctrl_read_configs(dev, conf,
+ ARRAY_SIZE(conf));
+ if (conf_count < 0) {
+ debug("%s: Cannot read configs: err=%d\n", __func__, ret);
+ return conf_count;
+ }
+
+ /*
+ * Assume that pin settings are provided for every pin. Pins not
+ * mentioned will get the first config mentioned in the list.
+ */
+ ret = broadwell_pinctrl_read_pins(dev, conf, conf_count, gpio_conf,
+ MAX_GPIOS);
+ if (ret) {
+ debug("%s: Cannot read pin settings: err=%d\n", __func__, ret);
+ return ret;
+ }
+
+ regs = (struct pch_lp_gpio_regs *)gpiobase;
+ broadwell_pinctrl_commit(regs, conf, gpio_conf, ARRAY_SIZE(conf));
+
+ debug("%s: done\n", __func__);
+
+ return 0;
+}
+
+static const struct udevice_id broadwell_pinctrl_match[] = {
+ { .compatible = "intel,x86-broadwell-pinctrl",
+ .data = X86_SYSCON_PINCONF },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(broadwell_pinctrl) = {
+ .name = "broadwell_pinctrl",
+ .id = UCLASS_SYSCON,
+ .of_match = broadwell_pinctrl_match,
+ .probe = broadwell_pinctrl_probe,
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * From Coreboot src/soc/intel/broadwell/include/soc/gpio.h
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_GPIO
+#define __ASM_ARCH_GPIO
+
+#define GPIO_PER_BANK 32
+#define GPIO_BANKS 3
+
+struct broadwell_bank_platdata {
+ uint16_t base_addr;
+ const char *bank_name;
+ int bank;
+};
+
+/* PCH-LP GPIOBASE Registers */
+struct pch_lp_gpio_regs {
+ u32 own[GPIO_BANKS];
+ u32 reserved0;
+
+ u16 pirq_to_ioxapic;
+ u16 reserved1[3];
+ u32 blink;
+ u32 ser_blink;
+
+ u32 ser_blink_cmdsts;
+ u32 ser_blink_data;
+ u16 gpi_nmi_en;
+ u16 gpi_nmi_sts;
+ u32 reserved2;
+
+ u32 gpi_route[GPIO_BANKS];
+ u32 reserved3;
+
+ u32 reserved4[4];
+
+ u32 alt_gpi_smi_sts;
+ u32 alt_gpi_smi_en;
+ u32 reserved5[2];
+
+ u32 rst_sel[GPIO_BANKS];
+ u32 reserved6;
+
+ u32 reserved9[3];
+ u32 gpio_gc;
+
+ u32 gpi_is[GPIO_BANKS];
+ u32 reserved10;
+
+ u32 gpi_ie[GPIO_BANKS];
+ u32 reserved11;
+
+ u32 reserved12[24];
+
+ struct {
+ u32 conf_a;
+ u32 conf_b;
+ } config[GPIO_BANKS * GPIO_PER_BANK];
+};
+check_member(pch_lp_gpio_regs, gpi_ie[0], 0x90);
+check_member(pch_lp_gpio_regs, config[0], 0x100);
+
+enum {
+ CONFA_MODE_SHIFT = 0,
+ CONFA_MODE_GPIO = 1 << CONFA_MODE_SHIFT,
+
+ CONFA_DIR_SHIFT = 2,
+ CONFA_DIR_INPUT = 1 << CONFA_DIR_SHIFT,
+
+ CONFA_INVERT_SHIFT = 3,
+ CONFA_INVERT = 1 << CONFA_INVERT_SHIFT,
+
+ CONFA_TRIGGER_SHIFT = 4,
+ CONFA_TRIGGER_LEVEL = 1 << CONFA_TRIGGER_SHIFT,
+
+ CONFA_LEVEL_SHIFT = 30,
+ CONFA_LEVEL_HIGH = 1UL << CONFA_LEVEL_SHIFT,
+
+ CONFA_OUTPUT_SHIFT = 31,
+ CONFA_OUTPUT_HIGH = 1UL << CONFA_OUTPUT_SHIFT,
+
+ CONFB_SENSE_SHIFT = 2,
+ CONFB_SENSE_DISABLE = 1 << CONFB_SENSE_SHIFT,
+};
+
+#endif
--- /dev/null
+Intel x86 PINCTRL/GPIO controller
+
+Pin-muxing on broadwell devices can be described with a node for the PINCTRL
+master node and a set of child nodes for each required pin state on the SoC.
+These pin states use phandles and are referred to but a configuration section
+which lists all pins in the device.
+
+The PINCTRL master node requires the following properties:
+- compatible : "intel,x86-broadwell-pinctrl"
+
+Pin state nodes must be sub-nodes of the pinctrl master node. The must have
+a phandle. They can contain the following optional properties:
+- mode-gpio - forces the pin into GPIO mode
+- output-value - sets the default output value of the GPIO, 0 (low, default)
+ or 1 (high)
+- direction - sets the direction of the gpio, either PIN_INPUT (default)
+ or PIN_OUTPUT
+- invert - the input pin is inverted
+- trigger - sets the trigger type, either TRIGGER_EDGE (default) or
+ TRIGGER_LEVEL
+- sense-disable - the input state sense is disabled
+- owner 0 sets the owner of the pin, either OWNER_ACPI (default) or
+ ONWER_GPIO
+- route - sets whether the pin is routed, either PIRQ_APIC_MASK or
+ PIRQ_APIC_ROUTE
+- irq-enable - the interrupt is enabled
+- reset-rsmrst - the pin will only be reset by RSMRST
+- pirq-apic - the pin will be routed to the IOxAPIC
+
+The first pin state will be the default, so pins without a configuration will
+use that.
+
+The pin configuration node is also a sub-node of the pinctrl master node, but
+does not have a phandle. It has a single property:
+
+- config - configuration to use for each pin. Each entry has of 3 cells:
+ - GPIO number (0..94)
+ - phandle of configuration (above)
+ - interrupt number (0..15)
+
+ There should be one entry for each pin (i.e. 95 entries).
+ But missing pins will receive the default configuration.
+
+Example:
+
+pch_pinctrl {
+ compatible = "intel,x86-broadwell-pinctrl";
+
+ /* Put this first: it is the default */
+ gpio_unused: gpio-unused {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ owner = <OWNER_GPIO>;
+ sense-disable;
+ };
+
+ gpio_acpi_sci: acpi-sci {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ route = <ROUTE_SCI>;
+ };
+
+ gpio_acpi_smi: acpi-smi {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ invert;
+ route = <ROUTE_SMI>;
+ };
+
+ gpio_input: gpio-input {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ owner = <OWNER_GPIO>;
+ };
+
+ gpio_input_invert: gpio-input-invert {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ owner = <OWNER_GPIO>;
+ invert;
+ };
+
+ gpio_native: gpio-native {
+ };
+
+ gpio_out_high: gpio-out-high {
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <1>;
+ owner = <OWNER_GPIO>;
+ sense-disable;
+ };
+
+ gpio_out_low: gpio-out-low {
+ mode-gpio;
+ direction = <PIN_OUTPUT>;
+ output-value = <0>;
+ owner = <OWNER_GPIO>;
+ sense-disable;
+ };
+
+ gpio_pirq: gpio-pirq {
+ mode-gpio;
+ direction = <PIN_INPUT>;
+ owner = <OWNER_GPIO>;
+ pirq-apic = <PIRQ_APIC_ROUTE>;
+ };
+
+ soc_gpio@0 {
+ config =
+ <0 &gpio_unused 0>, /* unused */
+ <1 &gpio_unused 0>, /* unused */
+ <2 &gpio_unused 0>, /* unused */
+ <3 &gpio_unused 0>, /* unused */
+ <4 &gpio_native 0>, /* native: i2c0_sda_gpio4 */
+ <5 &gpio_native 0>, /* native: i2c0_scl_gpio5 */
+ <6 &gpio_native 0>, /* native: i2c1_sda_gpio6 */
+ <7 &gpio_native 0>, /* native: i2c1_scl_gpio7 */
+ <8 &gpio_acpi_sci 0>, /* pch_lte_wake_l */
+ <9 &gpio_input_invert 0>,/* trackpad_int_l (wake) */
+ <10 &gpio_acpi_sci 0>, /* pch_wlan_wake_l */
+ <11 &gpio_unused 0>, /* unused */
+ <12 &gpio_unused 0>, /* unused */
+ <13 &gpio_pirq 3>, /* trackpad_int_l (pirql) */
+ <14 &gpio_pirq 4>, /* touch_int_l (pirqm) */
+ <15 &gpio_unused 0>, /* unused (strap) */
+ <16 &gpio_input 0>, /* pch_wp */
+ <17 &gpio_unused 0>, /* unused */
+ <18 &gpio_unused 0>, /* unused */
+ <19 &gpio_unused 0>, /* unused */
+ <20 &gpio_native 0>, /* pcie_wlan_clkreq_l */
+ <21 &gpio_out_high 0>, /* pp3300_ssd_en */
+ <22 &gpio_unused 0>, /* unused */
+ <23 &gpio_out_low 0>, /* pp3300_autobahn_en */
+ <24 &gpio_unused 0>, /* unused */
+ <25 &gpio_input 0>, /* ec_in_rw */
+ <26 &gpio_unused 0>, /* unused */
+ <27 &gpio_acpi_sci 0>, /* pch_wake_l */
+ <28 &gpio_unused 0>, /* unused */
+ <29 &gpio_unused 0>, /* unused */
+ <30 &gpio_native 0>, /* native: pch_suswarn_l */
+ <31 &gpio_native 0>, /* native: acok_buf */
+ <32 &gpio_native 0>, /* native: lpc_clkrun_l */
+ <33 &gpio_native 0>, /* native: ssd_devslp */
+ <34 &gpio_acpi_smi 0>, /* ec_smi_l */
+ <35 &gpio_acpi_smi 0>, /* pch_nmi_dbg_l (route in nmi_en) */
+ <36 &gpio_acpi_sci 0>, /* ec_sci_l */
+ <37 &gpio_unused 0>, /* unused */
+ <38 &gpio_unused 0>, /* unused */
+ <39 &gpio_unused 0>, /* unused */
+ <40 &gpio_native 0>, /* native: pch_usb1_oc_l */
+ <41 &gpio_native 0>, /* native: pch_usb2_oc_l */
+ <42 &gpio_unused 0>, /* wlan_disable_l */
+ <43 &gpio_out_high 0>, /* pp1800_codec_en */
+ <44 &gpio_unused 0>, /* unused */
+ <45 &gpio_acpi_sci 0>, /* dsp_int - codec wake */
+ <46 &gpio_pirq 6>, /* hotword_det_l_3v3 (pirqo) - codec irq */
+ <47 &gpio_out_low 0>, /* ssd_reset_l */
+ <48 &gpio_unused 0>, /* unused */
+ <49 &gpio_unused 0>, /* unused */
+ <50 &gpio_unused 0>, /* unused */
+ <51 &gpio_unused 0>, /* unused */
+ <52 &gpio_input 0>, /* sim_det */
+ <53 &gpio_unused 0>, /* unused */
+ <54 &gpio_unused 0>, /* unused */
+ <55 &gpio_unused 0>, /* unused */
+ <56 &gpio_unused 0>, /* unused */
+ <57 &gpio_out_high 0>, /* codec_reset_l */
+ <58 &gpio_unused 0>, /* unused */
+ <59 &gpio_out_high 0>, /* lte_disable_l */
+ <60 &gpio_unused 0>, /* unused */
+ <61 &gpio_native 0>, /* native: pch_sus_stat */
+ <62 &gpio_native 0>, /* native: pch_susclk */
+ <63 &gpio_native 0>, /* native: pch_slp_s5_l */
+ <64 &gpio_unused 0>, /* unused */
+ <65 &gpio_input 0>, /* ram_id3 */
+ <66 &gpio_input 0>, /* ram_id3_old (strap) */
+ <67 &gpio_input 0>, /* ram_id0 */
+ <68 &gpio_input 0>, /* ram_id1 */
+ <69 &gpio_input 0>, /* ram_id2 */
+ <70 &gpio_unused 0>, /* unused */
+ <71 &gpio_native 0>, /* native: modphy_en */
+ <72 &gpio_unused 0>, /* unused */
+ <73 &gpio_unused 0>, /* unused */
+ <74 &gpio_unused 0>, /* unused */
+ <75 &gpio_unused 0>, /* unused */
+ <76 &gpio_unused 0>, /* unused */
+ <77 &gpio_unused 0>, /* unused */
+ <78 &gpio_unused 0>, /* unused */
+ <79 &gpio_unused 0>, /* unused */
+ <80 &gpio_unused 0>, /* unused */
+ <81 &gpio_unused 0>, /* unused */
+ <82 &gpio_native 0>, /* native: ec_rcin_l */
+ <83 &gpio_native 0>, /* gspi0_cs */
+ <84 &gpio_native 0>, /* gspi0_clk */
+ <85 &gpio_native 0>, /* gspi0_miso */
+ <86 &gpio_native 0>, /* gspi0_mosi (strap) */
+ <87 &gpio_unused 0>, /* unused */
+ <88 &gpio_unused 0>, /* unused */
+ <89 &gpio_out_high 0>, /* pp3300_sd_en */
+ <90 &gpio_unused 0>, /* unused */
+ <91 &gpio_unused 0>, /* unused */
+ <92 &gpio_unused 0>, /* unused */
+ <93 &gpio_unused 0>, /* unused */
+ <94 &gpio_unused 0 >; /* unused */
+ };
+};
#define PULL_STR_2K 0
#define PULL_STR_20K 2
+#define ROUTE_SCI 0
+#define ROUTE_SMI 1
+
+#define OWNER_ACPI 0
+#define OWNER_GPIO 1
+
+#define PIRQ_APIC_MASK 0
+#define PIRQ_APIC_ROUTE 1
+
+#define TRIGGER_EDGE 0
+#define TRIGGER_LEVEL 1
+
#endif
projects / oweals / u-boot.git / commitdiff