+#
+# Copyright (C) 2016 Piotr Dymacz <piotr@dymacz.pl>
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
SHELL = bash
-HOSTARCH := $(shell uname -m | \
- sed -e s/i.86/x86_32/ \
- -e s/sun4u/sparc64/ \
- -e s/arm.*/arm/ \
- -e s/sa110/arm/ \
- -e s/powerpc/ppc/ \
- -e s/macppc/ppc/)
+HOSTARCH := $(shell uname -m | \
+ sed -e s/i.86/x86_32/ \
+ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ \
+ -e s/sa110/arm/ \
+ -e s/powerpc/ppc/ \
+ -e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTOS
export HOSTARCH
-export BUILD_TOPDIR=$(PWD)
-export STAGING_DIR=$(BUILD_TOPDIR)/tmp
-
-# --------------------------------------------------------------------------
-# Define absolute path to your toolchain directory here, for example:
-#
-# export TOOLCHAIN_DIR:=/home/user/toolchain-mips_34kc_gcc-5.4.0_musl-1.1.15
+export BUILD_TOPDIR = $(PWD)
+export STAGING_DIR = $(BUILD_TOPDIR)/tmp
+export SOURCE_DIR = $(BUILD_TOPDIR)/u-boot
+export BIN_DIR = $(BUILD_TOPDIR)/bin
+export SUB_MAKE_CMD = $(MAKE) --silent --no-print-directory \
+ ARCH=mips V=1 SHELL=$(SHELL)
+
+# ==========================================================================
+# You can override some default configuration options below or pass them on
+# command line, for example:
+# make ... IMG_SIZE=256 IMG_LZMA=0 CROSS_COMPILE=...
+
+# Set to 1 if you want to build RAM-loadable image, without low level
+# initialization of the hardware (PLL/clocks, DRAM):
+# IMG_RAM =
+
+# You can change limit of the image size in KB with below option (image will
+# be filled up to the selected size with 0xFF):
+# IMG_SIZE =
+
+# If you don't want LZMA compressed image, set below option to 1 (by default
+# images for all targets are LZMA compressed):
+# IMG_LZMA =
+
+# Define _absolute_ path to your toolchain directory, for example:
+# export TOOLCHAIN_DIR:=/home/user/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.15
# export PATH:=$(TOOLCHAIN_DIR)/bin:$(PATH)
-# --------------------------------------------------------------------------
ifndef CROSS_COMPILE
-CROSS_COMPILE = mips-openwrt-linux-musl-
+ CROSS_COMPILE = mips-openwrt-linux-musl-
endif
export CROSS_COMPILE
-export MAKECMD=make --silent --no-print-directory ARCH=mips
+# ==========================================================================
+
+# =======================
+# CUSTOM HELPER FUNCTIONS
+# =======================
+
+define echo_green
+ echo -e "\e[92m$(1)\e[0m"
+endef
+
+define echo_red
+ echo -e "\e[91m$(1)\e[0m"
+endef
+
+define echo_blue
+ echo -e "\e[96m$(1)\e[0m"
+endef
+
+# $(1): size
+define img_size
+$(if $(IMG_SIZE),$(strip $(IMG_SIZE)),$(strip $(1)))
+endef
+
+# $(1): value
+define is_one
+$(if $(filter $(strip $(1)),1),1,0)
+endef
+
+# $(1): file extension
+define img_name
+u-boot_mod__$(shell date +"%Y%m%d")__$@$(if \
+$(filter $(IMG_RAM),1),__RAM-LOAD-ONLY)$(if $(1),.$(1))
+endef
+
+define md5_sum
+ $(call echo_green,Calculating MD5 sum for the final image...)
+
+ md5sum $(BIN_DIR)/$(call img_name,bin) | \
+ awk '{print $$1}' | \
+ tr -d '\n' > $(BIN_DIR)/$(call img_name).md5
+
+ echo ' *'$(call img_name,bin) >> $(BIN_DIR)/$(call img_name,md5)
+endef
+
+# $(1): size
+define padded_img
+ $(call echo_green,Preparing $(1) KB image padded with 0xFF...)
+ tr "\000" "\377" < /dev/zero | dd ibs=1k count=$(1) \
+ of=$(BIN_DIR)/$(call img_name,bin) 2> /dev/null
+endef
+
+define final_img
+ $(call echo_green,Preparing final image...)
+ dd if=$(BIN_DIR)/temp.bin of=$(BIN_DIR)/$(call img_name,bin) \
+ conv=notrunc 2> /dev/null
+
+ rm -f $(BIN_DIR)/temp.bin
+endef
+
+# $(1): path to image
+# $(2): size limit in KB
+define size_chk
+ $(call echo_green,Checking size of the image...)
+
+ if [ `wc -c < $(1)` -gt `echo $(2)*1024 | bc` ]; then \
+ echo; \
+ $(call echo_red, ======================); \
+ $(call echo_red, IMAGE SIZE IS TOO BIG!); \
+ $(call echo_red, ======================); \
+ echo; \
+ rm -f $(1); \
+ exit 1; \
+ fi;
+endef
+
+# $(1): filename of image to copy
+# $(2): image size limit (check if set)
+define copy_img
+ echo;
+ $(call echo_green,Copying compiled image...)
+
+ cp $(SOURCE_DIR)/$(strip $(1)).bin $(BIN_DIR)/temp.bin
+ $(if $(2),$(call size_chk,$(BIN_DIR)/temp.bin,$(2)))
+endef
+
+# $(1): size limit in KB
+# $(2): if set to 1, use LZMA
+# $(3): other parameters passed to subdir make
+define build
+ args="IMG_SIZE=$(call img_size,$(1)) \
+ IMG_LZMA=$(call is_one,$(2)) \
+ $(strip $(3))"; \
+ cd $(SOURCE_DIR) && \
+ $(SUB_MAKE_CMD) $@ $$args && \
+ $(SUB_MAKE_CMD) all $$args
+
+ $(if $(filter $(IMG_RAM),1),\
+ $(call copy_img,u-boot), \
+ $(if $(filter $(call is_one,$(2)),1), \
+ $(call copy_img,tuboot,$(call img_size,$(1))), \
+ $(call copy_img,u-boot,$(call img_size,$(1))) \
+ ) \
+ )
+
+ $(if $(filter $(IMG_RAM),1),,$(call padded_img,$(1)))
+ $(call final_img)
+ $(call md5_sum)
+ echo;
+ $(call echo_green,DONE!)
+ $(call echo_green,Image 'bin/$(call img_name,bin)' is ready!)
+
+ if [ "x$$IMG_RAM" = "x1" ]; then \
+ echo; \
+ $(call echo_blue, ================================); \
+ $(call echo_blue, THIS IMAGE IS ONLY FOR RAM LOAD!); \
+ $(call echo_blue, DO NOT WRITE IT INTO FLASH CHIP!); \
+ $(call echo_blue, ================================); \
+ echo; \
+ fi;
+endef
+
+# ===========================================
+# TARGETS IN ALPHABETICAL ORDER, SHARED FIRST
+# ===========================================
+
+COMMON_AR933X_TARGETS = \
+ gainstrong_oolite_v1_dev \
+ gl-innovations_gl-inet-6416 \
+ tp-link_tl-mr10u \
+ tp-link_tl-mr13u \
+ tp-link_tl-mr3020 \
+ tp-link_tl-mr3040 \
+ tp-link_tl-mr3220_v2 \
+ tp-link_tl-wr703n \
+ tp-link_tl-wr710n \
+ tp-link_tl-wr720n_v3_CN \
+ tp-link_tl-wr740n_v4
+
+$(COMMON_AR933X_TARGETS):
+ @$(call build,123,1)
+
+COMMON_ETHS27_TARGETS = \
+ tp-link_tl-mr3420_v2 \
+ tp-link_tl-wa830re_v2_tl-wa801nd_v2 \
+ tp-link_tl-wdr3500 \
+ tp-link_tl-wr802n \
+ tp-link_tl-wr820n_CN \
+ tp-link_tl-wr841n_v8 \
+ tp-link_tl-wr841n_v9
+
+$(COMMON_ETHS27_TARGETS):
+ @$(call build,123,1,ETH_CONFIG=_s27)
-# boot delay (time to autostart boot command)
-export CONFIG_BOOTDELAY=1
+8devices_carambola2:
+ @$(call build,256)
-# uncomment following line, to build RAM version images (without low level initialization)
-#export CONFIG_SKIP_LOWLEVEL_INIT=1
+d-link_dir-505:
+ @$(call build,64,1)
-tplink_mr3020: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr3020
-tplink_mr3020: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr3020: export COMPRESSED_UBOOT=1
-endif
-tplink_mr3020:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr3020_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr703n: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr703n
-tplink_wr703n: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr703n: export COMPRESSED_UBOOT=1
-endif
-tplink_wr703n:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr703n_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr720n_v3_CN: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr720n_v3_CN
-tplink_wr720n_v3_CN: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr720n_v3_CN: export COMPRESSED_UBOOT=1
-endif
-tplink_wr720n_v3_CN:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr720n_v3_CN_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr710n: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr710n
-tplink_wr710n: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr710n: export COMPRESSED_UBOOT=1
-endif
-tplink_wr710n:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr710n_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_mr3040: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr3040
-tplink_mr3040: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr3040: export COMPRESSED_UBOOT=1
-endif
-tplink_mr3040:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr3040_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_mr10u: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr10u
-tplink_mr10u: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr10u: export COMPRESSED_UBOOT=1
-endif
-tplink_mr10u:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr10u_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_mr13u: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr13u
-tplink_mr13u: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr13u: export COMPRESSED_UBOOT=1
-endif
-tplink_mr13u:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr13u_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr740n_v4: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr740n_v4
-tplink_wr740n_v4: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr740n_v4: export COMPRESSED_UBOOT=1
-endif
-tplink_wr740n_v4:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr740n_v4_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_mr3220_v2: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr3220_v2
-tplink_mr3220_v2: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr3220_v2: export COMPRESSED_UBOOT=1
-endif
-tplink_mr3220_v2:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr3220_v2_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wdr3600_43x0: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wdr3600-43x0
-tplink_wdr3600_43x0: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wdr3600_43x0: export COMPRESSED_UBOOT=1
-endif
-tplink_wdr3600_43x0: export ETH_CONFIG=_s17
-tplink_wdr3600_43x0:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wdr3600_43x0_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wdr3500: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wdr3500
-tplink_wdr3500: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wdr3500: export COMPRESSED_UBOOT=1
-endif
-tplink_wdr3500: export ETH_CONFIG=_s27
-tplink_wdr3500:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wdr3500_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_mr3420_v2: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-mr3420_v2
-tplink_mr3420_v2: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_mr3420_v2: export COMPRESSED_UBOOT=1
-endif
-tplink_mr3420_v2: export ETH_CONFIG=_s27
-tplink_mr3420_v2:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) mr3420_v2_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr841n_v8: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr841n_v8
-tplink_wr841n_v8: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr841n_v8: export COMPRESSED_UBOOT=1
-endif
-tplink_wr841n_v8: export ETH_CONFIG=_s27
-tplink_wr841n_v8:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr841n_v8_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr841n_v9: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr841n_v9
-tplink_wr841n_v9: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr841n_v9: export COMPRESSED_UBOOT=1
-endif
-tplink_wr841n_v9: export ETH_CONFIG=_s27
-tplink_wr841n_v9:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr841n_v9_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wa830re_v2_wa801nd_v2: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wa830re_v2_tl-wa801nd_v2
-tplink_wa830re_v2_wa801nd_v2: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wa830re_v2_wa801nd_v2: export COMPRESSED_UBOOT=1
-endif
-tplink_wa830re_v2_wa801nd_v2: export ETH_CONFIG=_s27
-tplink_wa830re_v2_wa801nd_v2:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wa830re_v2_wa801nd_v2_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr820n_CN: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr820n_CN
-tplink_wr820n_CN: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr820n_CN: export COMPRESSED_UBOOT=1
-endif
-tplink_wr820n_CN: export ETH_CONFIG=_s27
-tplink_wr820n_CN:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr820n_CN_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-tplink_wr802n: export UBOOT_FILE_NAME=uboot_for_tp-link_tl-wr802n
-tplink_wr802n: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-tplink_wr802n: export COMPRESSED_UBOOT=1
-endif
-tplink_wr802n: export ETH_CONFIG=_s27
-tplink_wr802n:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) wr802n_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-dlink_dir505: export UBOOT_FILE_NAME=uboot_for_d-link_dir-505
-dlink_dir505: export CONFIG_MAX_UBOOT_SIZE_KB=64
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-dlink_dir505: export COMPRESSED_UBOOT=1
-endif
-dlink_dir505:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) dir505_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-gs-oolite_v1_dev: export UBOOT_FILE_NAME=uboot_for_gs-oolite_v1_dev
-gs-oolite_v1_dev: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-gs-oolite_v1_dev: export COMPRESSED_UBOOT=1
-endif
-gs-oolite_v1_dev:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) gs_oolite_v1_dev_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
+dragino_v2_ms14:
+ @$(call build,192,1,DEVICE_VENDOR=dragino)
-8devices_carambola2: export UBOOT_FILE_NAME=uboot_for_8devices_carambola2
-8devices_carambola2: export CONFIG_MAX_UBOOT_SIZE_KB=256
-8devices_carambola2:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) carambola2_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
+tp-link_tl-wdr3600_tl-43x0:
+ @$(call build,123,1,ETH_CONFIG=_s17)
+
+unwireddevices_unwired-one:
+ @$(call build,128,1,DEVICE_VENDOR=SE)
+
+village-telco_mesh-potato_v2:
+ @$(call build,192,1,DEVICE_VENDOR=villagetelco)
-dragino_v2_ms14: export UBOOT_FILE_NAME=uboot_for_dragino_v2_ms14
-dragino_v2_ms14: export CONFIG_MAX_UBOOT_SIZE_KB=192
-dragino_v2_ms14: export DEVICE_VENDOR=dragino
-dragino_v2_ms14:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) dragino_v2_ms14_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-black_swift_board: export UBOOT_FILE_NAME=uboot_for_black_swift_board
-black_swift_board: export CONFIG_MAX_UBOOT_SIZE_KB=128
-black_swift_board: export COMPRESSED_UBOOT=1
-black_swift_board: export DEVICE_VENDOR=SE
-black_swift_board:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) black_swift_board_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-villagetelco_mp2: export UBOOT_FILE_NAME=uboot_for_villagetelco_mp2
-villagetelco_mp2: export CONFIG_MAX_UBOOT_SIZE_KB=192
-villagetelco_mp2: export DEVICE_VENDOR=villagetelco
-villagetelco_mp2:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) villagetelco_mp2_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-gl-inet: export UBOOT_FILE_NAME=uboot_for_gl-inet
-gl-inet: export CONFIG_MAX_UBOOT_SIZE_KB=123
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-gl-inet: export COMPRESSED_UBOOT=1
-endif
-gl-inet:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) gl-inet_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-wallys_dr531: export UBOOT_FILE_NAME=uboot_for_wallys_dr531
-wallys_dr531: export CONFIG_MAX_UBOOT_SIZE_KB=192
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-wallys_dr531: export COMPRESSED_UBOOT=1
-endif
-wallys_dr531: export ETH_CONFIG=_s27
wallys_dr531:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) dr531_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-zbtlink_zbt_we1526: export UBOOT_FILE_NAME=uboot_for_zbtlink_zbt-we1526
-zbtlink_zbt_we1526: export CONFIG_MAX_UBOOT_SIZE_KB=256
-zbtlink_zbt_we1526: export ETH_CONFIG=_s27
-zbtlink_zbt_we1526:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) zbt-we1526_config
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) ENDIANNESS=-EB V=1 all
- @make --no-print-directory show_size
-
-ifdef CONFIG_SKIP_LOWLEVEL_INIT
-show_size: export UBOOT_FILE_NAME_SUFFIX=__RAM
-endif
-show_size:
-ifdef COMPRESSED_UBOOT
- @cp $(BUILD_TOPDIR)/u-boot/tuboot.bin $(BUILD_TOPDIR)/bin/temp.bin
-else
- @cp $(BUILD_TOPDIR)/u-boot/u-boot.bin $(BUILD_TOPDIR)/bin/temp.bin
-endif
- @echo -ne "\e[32m"
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
- @echo "> Preparing $(CONFIG_MAX_UBOOT_SIZE_KB)KB file filled with 0xFF..."
- @`tr "\000" "\377" < /dev/zero | dd ibs=1k count=$(CONFIG_MAX_UBOOT_SIZE_KB) of=$(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin 2> /dev/null`
- @echo "> Copying U-Boot image..."
- @`dd if=$(BUILD_TOPDIR)/bin/temp.bin of=$(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin conv=notrunc 2> /dev/null`
- @`rm $(BUILD_TOPDIR)/bin/temp.bin`
-else
- @echo "> Copying U-Boot image..."
- @`mv $(BUILD_TOPDIR)/bin/temp.bin $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin`
-endif
- @echo "> U-Boot image ready, size:" `wc -c < $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin`" bytes"
- @`md5sum $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin | awk '{print $$1}' | tr -d '\n' > $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).md5`
- @`echo ' *'$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin >> $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).md5`
-# Do not check image size for RAM version
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
- @if [ "`wc -c < $(BUILD_TOPDIR)/bin/$(UBOOT_FILE_NAME)$(UBOOT_FILE_NAME_SUFFIX).bin`" -gt "`echo '$(CONFIG_MAX_UBOOT_SIZE_KB)*1024' | bc`" ]; then \
- echo -e "\e[31m\n**************************************************"; \
- echo "* WARNING: U-BOOT IMAGE SIZE IS TOO BIG! *"; \
- echo -e "**************************************************"; \
- fi;
-endif
- @echo -ne "\e[0m"
+ @$(call build,192,1,ETH_CONFIG=_s27)
+
+zbtlink_zbt-we1526:
+ @$(call build,256,1,ETH_CONFIG=_s27)
+
+# =============
+# CLEAN TARGETS
+# =============
clean:
- @cd $(BUILD_TOPDIR)/u-boot/ && $(MAKECMD) --no-print-directory distclean
- @rm -f $(BUILD_TOPDIR)/u-boot/httpd/fsdata.c
+ @cd $(SOURCE_DIR) && $(SUB_MAKE_CMD) distclean
+ @rm -f $(SOURCE_DIR)/httpd/fsdata.c
-clean_all: clean
- @echo -e "\e[32m> Removing all binary images...\e[0m"
- @rm -f $(BUILD_TOPDIR)/bin/*.bin
- @rm -f $(BUILD_TOPDIR)/bin/*.md5
+clean_all: clean
+ @$(call echo_green,Removing all binary images...)
+ @rm -f $(BIN_DIR)/*.bin
+ @rm -f $(BIN_DIR)/*.md5
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2016 Piotr Dymacz <piotr@dymacz.pl>
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2000-2006 Wolfgang Denk,
+# DENX Software Engineering, wd@denx.de.
#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# SPDX-License-Identifier: GPL-2.0
#
-SHELL = bash
-VERSION = 1
-PATCHLEVEL = 1
-SUBLEVEL = 4
-EXTRAVERSION = -$(shell git rev-parse --short=8 HEAD)
-ISREPODIRTY = $(shell if git diff-files | read dummy; then echo 1; else echo 0; fi)
-VERSION_FILE = include/version_autogenerated.h
+VERSION = 1
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION = -$(shell git rev-parse --short=8 HEAD)
+ISREPODIRTY = $(shell if git diff-files | read dummy; then echo 1; else echo 0; fi)
+VERSION_FILE = include/version_autogenerated.h
+
+MKCONFIG = $(BUILD_TOPDIR)/u-boot/mkconfig
+MKIMAGE = $(BUILD_TOPDIR)/u-boot/tools/mkimage
+LZMA = $(BUILD_TOPDIR)/host_util/$(HOSTOS)-$(HOSTARCH)/lzma
# Show in version string if we are not building from clean repository
-ifeq ($(ISREPODIRTY), 1)
-U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-dirty"
+ifeq ($(ISREPODIRTY),1)
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-dirty"
else
-U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-clean"
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-clean"
endif
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
-
-#########################################################################
+# ===============================================================
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
+TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
+export TOPDIR
-ifdef COMPRESSED_UBOOT
- ifndef CONFIG_SKIP_LOWLEVEL_INIT
-COMPRESSED_UBOOT = 1
-export export COMPRESSED_UBOOT
- endif
+# Some variables passed as arguments in cmd
+ifneq ($(IMG_SIZE),)
+ CONFIG_MAX_UBOOT_SIZE_KB = $(IMG_SIZE)
+ export CONFIG_MAX_UBOOT_SIZE_KB
endif
-ifeq (include/config.mk,$(wildcard include/config.mk))
-# load ARCH, BOARD, and CPU configuration
-include include/config.mk
-export ARCH CPU BOARD VENDOR SOC
-ifndef CROSS_COMPILE
-ifeq ($(HOSTARCH),ppc)
-CROSS_COMPILE =
-else
-ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
-endif
-ifeq ($(ARCH),arm)
-CROSS_COMPILE = arm-linux-
-endif
-ifeq ($(ARCH),i386)
-ifeq ($(HOSTARCH),i386)
-CROSS_COMPILE =
-else
-CROSS_COMPILE = i386-linux-
-endif
-endif
-ifeq ($(ARCH),mips)
-CROSS_COMPILE = mips-linux-
-endif
-ifeq ($(ARCH),nios)
-CROSS_COMPILE = nios-elf-
-endif
-ifeq ($(ARCH),nios2)
-CROSS_COMPILE = nios2-elf-
+ifeq ($(IMG_LZMA),1)
+ COMPRESSED_UBOOT = 1
+ export COMPRESSED_UBOOT
endif
-ifeq ($(ARCH),m68k)
-CROSS_COMPILE = m68k-elf-
+
+ifeq ($(IMG_RAM),1)
+ CONFIG_SKIP_LOWLEVEL_INIT = 1
+ export CONFIG_SKIP_LOWLEVEL_INIT
endif
-ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = mb-
+
+ifneq ($(DEVICE_VENDOR),)
+ DEVICE_VENDOR = $(DEVICE_VENDOR)
+ export DEVICE_VENDOR
endif
-ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-elf-
+
+# Never use LZMA compression
+# for a RAM version of image
+ifdef CONFIG_SKIP_LOWLEVEL_INIT
+ unexport COMPRESSED_UBOOT
+ COMPRESSED_UBOOT =
endif
+
+ifndef CROSS_COMPILE
+ $(error "CROSS_COMPILE is not defined!")
endif
+export CROSS_COMPILE
+
+ifndef STAGING_DIR
+ $(error "STAGING_DIR is not defined!")
endif
+export STAGING_DIR
-export CROSS_COMPILE
+# Endianness
+ifndef ENDIANNESS
+ ENDIANNESS=-EB
+endif
+export ENDIANNESS
+
+# =======================
+# CUSTOM HELPER FUNCTIONS
+# =======================
+
+define echo_green
+ echo -e "\e[92m$(1)\e[0m"
+endef
+
+define echo_red
+ echo -e "\e[91m$(1)\e[0m"
+endef
+
+define echo_yellow
+ echo -e "\e[93m$(1)\e[0m"
+endef
+
+define ih_name
+u-boot_mod $(if $(filter $(IMG_RAM),1),RAM,$(if $(filter $(IMG_LZMA),1),LZMA FLASH,FLASH)) image
+endef
+
+# $(1): define name
+# $(2): define value
+define define_add
+ len=$$((5 - ($$(expr length $(1))/8))); \
+ tab=`printf '%*s' "$$len" | tr ' ' "\t"`; \
+ echo -ne "#define $(strip $(1))$${tab}" >> include/config.h; \
+ echo -e '$(strip $(2))' >> include/config.h
+endef
+
+# $(1): define name
+define undef_add
+ echo -e '#undef $(strip $(1))' >> include/config.h
+endef
+
+# $(1): path
+define include_add
+ echo -e '#include <$(strip $(1))>' >> include/config.h
+endef
+
+# $(1): name
+define board_name
+$(if $(1),$(strip $(1)),OEM/Unknown)
+endef
+
+# $(1): size
+define flash_size
+$(if $(1),$(strip $(1)),4)
+endef
+
+# $(1): vendor, board name/model
+# $(2): default FLASH size in MB
+# $(3): reset button GPIO number
+# $(4): 1 if reset button is active low
+# $(5): SOC_TYPE
+define config_init
+ $(call echo_green,Preparing configuration for target: $@)
+ echo
+
+ $(call echo_yellow, Device vendor/model:\t$(call board_name,$(1)))
+ $(if $(DEVICE_VENDOR), \
+ $(call echo_yellow, Custom recovery web:\tyes ($(DEVICE_VENDOR))), \
+ $(call echo_yellow, Custom recovery web:\tno) \
+ )
+
+ $(if $(CONFIG_MAX_UBOOT_SIZE_KB), \
+ $(call echo_yellow, Image size limit:\t$(CONFIG_MAX_UBOOT_SIZE_KB) KB),
+ $(call echo_yellow, Image size limit:\tnot specified)
+ )
+
+ $(call echo_yellow, Default FLASH size:\t$(call flash_size,$(2)) MB)
+
+ $(if $(3),
+ $(call echo_yellow, GPIO reset button:\t$(strip $(3))), \
+ $(call echo_yellow, GPIO reset button:\tnot specified) \
+ )
+
+ $(if $(filter $(4),1),
+ $(call echo_yellow, Button active low:\tyes), \
+ $(call echo_yellow, Button active low:\tno) \
+ )
+
+ $(if $(filter $(COMPRESSED_UBOOT),1), \
+ $(call echo_yellow, LZMA compression:\tyes), \
+ $(call echo_yellow, LZMA compression:\tno) \
+ )
+
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call echo_yellow, RAM-loadable only:\tyes), \
+ $(call echo_yellow, RAM-loadable only:\tno) \
+ )
+
+ $(if $(3),$(call define_add,CONFIG_GPIO_RESET_BTN,$(strip $(3))))
+ $(if $(filter $(4),1),$(call define_add,CONFIG_GPIO_RESET_BTN_ACTIVE_LOW,1))
+ $(if $(CONFIG_MAX_UBOOT_SIZE_KB), \
+ $(call define_add,CONFIG_MAX_UBOOT_SIZE_KB,$(CONFIG_MAX_UBOOT_SIZE_KB))
+ )
+
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call define_add,CONFIG_SKIP_LOWLEVEL_INIT,1) \
+ )
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call undef_add,COMPRESSED_UBOOT) \
+ )
+
+ $(if $(5), \
+ $(call define_add,SOC_TYPE,$(5)) \
+ )
+
+ $(call define_add,CONFIG_BOARD_CUSTOM_STRING,"$(call board_name,$(1))")
+ $(call define_add,CONFIG_DEFAULT_FLASH_SIZE_IN_MB,$(call flash_size,$(2)))
+
+ echo
+endef
+
+# ===============================================================
+
+# First, check if configuration was done
+ifneq (include/config.mk, $(wildcard include/config.mk))
+all install u-boot u-boot.srec depend dep:
+ $(error "System was not configured!")
+else
+# Load ARCH, BOARD, and CPU configuration
+include include/config.mk
+export ARCH CPU BOARD VENDOR SOC
-# load other configuration
+# Load other configuration
include $(TOPDIR)/config.mk
-
-#########################################################################
+# ===============================================================
# U-Boot objects....order is important (i.e. start must be first)
-OBJS = cpu/$(CPU)/start.o
-
-ifdef COMPRESSED_UBOOT
- ifndef CONFIG_SKIP_LOWLEVEL_INIT
-OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
- endif
-endif
+OBJS = cpu/$(CPU)/start.o
LIBS = lib_generic/libgeneric.a
LIBS += common/libcommon.a
LIBS_SHARED = board/$(BOARDDIR)/lib$(BOARD).a
ifdef SOC
-LIBS_SHARED += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+ LIBS_SHARED += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
LIBS_SHARED += cpu/$(CPU)/lib$(CPU).a
ifdef COMPRESSED_UBOOT
- ifndef CONFIG_SKIP_LOWLEVEL_INIT
-LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
- endif
-endif
-
-PHONY_LIBS = $(LIBS) $(LIBS_SHARED)
-
-ifdef COMPRESSED_UBOOT
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-PHONY_LIBS = $(LIBS_BOOTSTRAP) $(LIBS_SHARED)
-endif
+ OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
+ LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
+ PHONY_LIBS = $(LIBS_BOOTSTRAP) $(LIBS_SHARED)
+else
+ PHONY_LIBS = $(LIBS) $(LIBS_SHARED)
endif
-
-.PHONY : $(PHONY_LIBS)
+.PHONY: $(PHONY_LIBS)
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
-SUBDIRS = tools
+SUBDIRS = tools
-.PHONY : $(SUBDIRS)
+.PHONY: $(SUBDIRS)
-#########################################################################
-#########################################################################
+# ===============================================================
ALL = u-boot.srec u-boot.bin System.map
ifdef COMPRESSED_UBOOT
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-all: $(ALL) tuboot.bin
-else
-all: $(ALL) u-boot.img
-endif
+all: $(ALL) tuboot.bin
else
-all: $(ALL) u-boot.img
+all: $(ALL) u-boot.img
endif
-u-boot.hex: u-boot
+u-boot.hex: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
-u-boot.srec: u-boot
+u-boot.srec: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
-u-boot.bin: u-boot
+u-boot.bin: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-u-boot.img: u-boot.bin
- @echo -e "\e[32m> Preparing U-Boot image \"u-boot.img\"...\e[0m"
- ./tools/mkimage -A $(ARCH) -T firmware -C none \
- -a $(TEXT_BASE) -e 0 \
- -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
- sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
- -d $< $@
+u-boot.img: u-boot.bin
+ @echo
+ $(call echo_green,Preparing regular U-Boot image $@...)
+ $(MKIMAGE) -A $(ARCH) -T firmware -C none -a $(TEXT_BASE) \
+ -e 0 -n '$(call ih_name)' -d $< $@
-u-boot.dis: u-boot
+u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LIBS_SHARED) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) $(LIBS_SHARED) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) $(LIBS_SHARED) --end-group $(PLATFORM_LIBS) \
- -Map u-boot.map -o u-boot
+u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LIBS_SHARED) $(LDSCRIPT)
+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) $(LIBS_SHARED) | \
+ sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p' | \
+ sort | uniq`; \
+ $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
+ --start-group $(LIBS) $(LIBS_SHARED) \
+ --end-group $(PLATFORM_LIBS) \
+ -Map u-boot.map -o u-boot
$(LIBS_SHARED):
$(MAKE) -C `dirname $@`
$(SUBDIRS):
$(MAKE) -C $@ all
+# For LZMA compressed image
ifdef COMPRESSED_UBOOT
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-LZMA = $(BUILD_TOPDIR)/host_util/$(HOSTOS)-$(HOSTARCH)/lzma
-
-tuboot.bin: System.map bootstrap.bin u-boot.lzimg
+tuboot.bin: System.map bootstrap.bin u-boot.lzimg
@cat bootstrap.bin > $@
@cat u-boot.lzimg >> $@
u-boot.lzimg: $(obj)u-boot.bin System.map
+ @echo
@rm -rf u-boot.bin.lzma
- $(LZMA) --best --keep $(obj)u-boot.bin
- @echo -e "\e[32m> Preparing compressed U-Boot image \"u-boot.lzimg\"...\e[0m"
- ./tools/mkimage -A mips -T firmware -C lzma \
- -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
- -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
- -n 'u-boot image' -d $(obj)u-boot.bin.lzma $@
-
-bootstrap.bin: bootstrap
+ @$(call echo_green,Compressing U-Boot image $<...)
+ @$(LZMA) --best --keep $(obj)u-boot.bin
+ $(call echo_green,Preparing LZMA compressed U-Boot image $@...)
+ $(MKIMAGE) -A $(ARCH) -T firmware -C lzma \
+ -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | \
+ awk '{ printf "%s", $$1 }') \
+ -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | \
+ awk '{ printf "%s", $$1 }') \
+ -n '$(call ih_name)' -d $(obj)u-boot.bin.lzma $@
+
+bootstrap.bin: bootstrap
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-bootstrap: depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LIBS_SHARED) $(LDSCRIPT_BOOTSTRAP)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
- --start-group $(LIBS_BOOTSTRAP) $(LIBS_SHARED) --end-group $(PLATFORM_LIBS) \
- -Map bootstrap.map -o bootstrap
+bootstrap: depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LIBS_SHARED) $(LDSCRIPT_BOOTSTRAP)
+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) | \
+ sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p' | \
+ sort | uniq`; \
+ $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
+ --start-group $(LIBS_BOOTSTRAP) $(LIBS_SHARED) \
+ --end-group $(PLATFORM_LIBS) \
+ -Map bootstrap.map -o bootstrap
$(LIBS_BOOTSTRAP):
$(MAKE) -C `dirname $@`
-endif
-endif
+endif # ifdef COMPRESSED_UBOOT
version:
- @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
- echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
- echo "\"" >> $(VERSION_FILE)
-
-gdbtools:
- $(MAKE) -C tools/gdb || exit 1
+ @echo -n "#define U_BOOT_VERSION \"U-Boot $(U_BOOT_VERSION)\"" > $(VERSION_FILE)
depend dep:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
-
-tags:
- ctags -w `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-
-etags:
- etags -a `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-
-System.map: u-boot
- @$(NM) $< | \
- grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
+ @for dir in $(SUBDIRS); do $(MAKE) -C $$dir .depend; done
-#########################################################################
-else
-all install u-boot u-boot.srec depend dep:
- @echo "System not configured - see README" >&2
- @ exit 1
-endif
+System.map: u-boot
+ @$(NM) $< | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ sort > System.map
+endif # include/config.mk
-#########################################################################
+# =====================
+# COMMON/SHARED TARGETS
+# =====================
unconfig:
+ @$(call echo_green,Removing configuration...)
@rm -f include/config.h include/config.mk board/*/config.tmp
-#========================================================================
-# MIPS
-#========================================================================
-#########################################################################
-## MIPS32 AR7100 (24K)
-#########################################################################
-common_config :
+config_common:
@ >include/config.h
- @echo "/* Temporary solution */" >> include/config.h
- @echo "/* AR933x */" >> include/config.h
- @echo "#define QCA_AR9330_SOC 0x00001" >> include/config.h
- @echo "#define QCA_AR9331_SOC 0x00002" >> include/config.h
- @echo "#define QCA_AR933X_SOC (QCA_AR9330_SOC | QCA_AR9331_SOC)" >> include/config.h
- @echo "/* AR934x */" >> include/config.h
- @echo "#define QCA_AR9341_SOC 0x00010" >> include/config.h
- @echo "#define QCA_AR9342_SOC 0x00020" >> include/config.h
- @echo "#define QCA_AR9344_SOC 0x00040" >> include/config.h
- @echo "#define QCA_AR934X_SOC (QCA_AR9341_SOC | QCA_AR9342_SOC | QCA_AR9344_SOC)" >> include/config.h
- @echo "/* QCA953x */" >> include/config.h
- @echo "#define QCA_QCA9531_SOC 0x00100" >> include/config.h
- @echo "#define QCA_QCA9533_SOC 0x00200" >> include/config.h
- @echo "#define QCA_QCA953X_SOC (QCA_QCA9531_SOC | QCA_QCA9533_SOC)" >> include/config.h
- @echo "/* QCA956x */" >> include/config.h
- @echo "#define QCA_QCA9561_SOC 0x01000" >> include/config.h
- @echo "#define QCA_QCA9563_SOC 0x02000" >> include/config.h
- @echo "#define QCA_QCA956X_SOC (QCA_QCA9561_SOC | QCA_QCA9563_SOC)" >> include/config.h
- @echo "/* QCA955x */" >> include/config.h
- @echo "#define QCA_QCA9557_SOC 0x10000" >> include/config.h
- @echo "#define QCA_QCA9558_SOC 0x20000" >> include/config.h
- @echo "#define QCA_QCA955X_SOC (QCA_QCA9557_SOC | QCA_QCA9558_SOC)" >> include/config.h
- @echo "" >> include/config.h
-
-ifdef CONFIG_BOOTDELAY
- @echo "#define CONFIG_BOOTDELAY "$(CONFIG_BOOTDELAY) >> include/config.h
-endif
-
-ifdef CONFIG_MAX_UBOOT_SIZE_KB
- @echo "#define CONFIG_MAX_UBOOT_SIZE_KB "$(CONFIG_MAX_UBOOT_SIZE_KB) >> include/config.h
-endif
-
-ifdef CONFIG_SKIP_LOWLEVEL_INIT
- @echo "#define CONFIG_SKIP_LOWLEVEL_INIT 1" >> include/config.h
- @echo "#undef COMPRESSED_UBOOT" >> include/config.h
-endif
-
- @echo "#define CONFIG_SILENT_CONSOLE 1" >> include/config.h
- @echo "#define CONFIG_DELAY_TO_AUTORUN_HTTPD 3" >> include/config.h
- @echo "#define CONFIG_DELAY_TO_AUTORUN_CONSOLE 5" >> include/config.h
- @echo "#define CONFIG_DELAY_TO_AUTORUN_NETCONSOLE 7" >> include/config.h
-
- # max delay time for button pressing
- @echo "#define CONFIG_MAX_BUTTON_PRESSING 10" >> include/config.h
-
- # don't show info about console (in, out, err...)
- @echo "#define CFG_CONSOLE_INFO_QUIET" >> include/config.h
-
-hornet_common_config : common_config
- @echo "#define SOC_TYPE QCA_AR933X_SOC" >> include/config.h
- @echo "#define CONFIG_MACH_HORNET 1" >> include/config.h
-
-wr703n_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR703N at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_WR703N_V1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR703N\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr720n_v3_CN_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR720N v3 CN at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_WR720N_V3 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR720N v3 CN\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr710n_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR710N at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_WR710N_V1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR710N\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3020_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR3020 at:' `date`.'\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_MR3020_V1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR3020\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3040_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR3040 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_MR3040_V1V2 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR3040\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr10u_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR10U at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_MR10U_V1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR10U\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr13u_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR13U at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_MR13U_V1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR13U\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr740n_v4_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR740N v4 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_WR740N_V4 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR74xN/D v4\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3220_v2_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR3220 v2 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_TPLINK_MR3220_V2 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR3220 v2\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-dir505_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for D-Link DIR-505 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_DLINK_DIR505_A1 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"D-Link DIR-505\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-gs_oolite_v1_dev_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for GS-Oolite v1 with dev board at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_GS_OOLITE_V1_DEV 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Gainstrong GS-Oolite v1\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-black_swift_board_config : unconfig hornet_common_config
- @echo '======= Configuring for Black Swift board (128K compressed) at:' `date` '======='
- @echo "#define CONFIG_FOR_BLACK_SWIFT_BOARD 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Black Swift board\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-carambola2_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for 8devices Carambola 2 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_8DEVICES_CARAMBOLA2 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"8devices Carambola2 v1\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-dragino_v2_ms14_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for Dragino Dragino v2 (MS14) at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_DRAGINO_V2 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define WEBFAILSAFE_DISABLE_ART_UPGRADE 1" >> include/config.h
- @echo "#define WEBFAILSAFE_DISABLE_UBOOT_UPGRADE 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Dragino v2 MS14\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-villagetelco_mp2_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for Village Telco Mesh Potato 2 at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_MESH_POTATO_V2 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define WEBFAILSAFE_DISABLE_ART_UPGRADE 1" >> include/config.h
- @echo "#define WEBFAILSAFE_DISABLE_UBOOT_UPGRADE 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Village Telco Mesh Potato 2\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-gl-inet_config : unconfig hornet_common_config
- @echo -e '\e[32m> Configuring for GL.iNet at:' `date` '\e[0m'
- @echo "#define CONFIG_FOR_GL_INET 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 11" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"GL.iNet\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wasp_common_config : common_config
- @echo "#define CONFIG_WASP 1" >> include/config.h
- @echo "#define CONFIG_WASP_SUPPORT 1" >> include/config.h
-
-wdr3600_43x0_config : unconfig wasp_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WDR3600/43x0 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_AR9344_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WDR3600_WDR43X0_V1 1" >> include/config.h
- @echo "#define CFG_ATHRS17_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 1" >> include/config.h
- @echo "#define CONFIG_PCI 1" >> include/config.h
- @echo "#define CFG_DUAL_PHY_SUPPORT 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 16" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WDR3600/43x0\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wdr3500_config : unconfig wasp_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WDR3500 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_AR9344_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WDR3500_V1 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define CONFIG_PCI 1" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 16" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WDR3500\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-mr3420_v2_config : unconfig wasp_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-MR3420 v2 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_AR9341_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_MR3420_V2 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 17" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-MR3420 v2\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wr841n_v8_config : unconfig wasp_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR841N/D v8 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_AR9341_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WR841N_V8 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 17" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR841N/D v8\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wa830re_v2_wa801nd_v2_config : unconfig wasp_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WA830RE/TL-WA801ND v2 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_AR9341_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WA830RE_V2_WA801ND_V2 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 17" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WA830RE/TL-WA801ND v2\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-ap143_common_config : common_config
- @echo "#define CONFIG_ATHEROS 1" >> include/config.h
- @echo "#define CONFIG_MACH_QCA953x 1" >> include/config.h
-
-dr531_config : unconfig ap143_common_config
- @echo -e '\e[32m> Configuring for Wallys DR531 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_QCA953X_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_WALLYS_DR531 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_ATH_GMAC_NMACS 2" >> include/config.h
- @echo "#define CONFIG_PCI 1" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 17" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Wallys DR531\"" >> include/config.h
-
- @./mkconfig -a ap143 mips mips ap143 ar7240 ar7240
-
-wr820n_CN_config : unconfig ap143_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR820N CN at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_QCA953X_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WR820N_CN 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_ATH_GMAC_NMACS 2" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 12" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR820N CN\"" >> include/config.h
-
- @./mkconfig -a ap143 mips mips ap143 ar7240 ar7240
-
-wr802n_config : unconfig ap143_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR802N at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_QCA953X_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WR802N 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_ATH_GMAC_NMACS 2" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 12" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR802N\"" >> include/config.h
-
- @./mkconfig -a ap143 mips mips ap143 ar7240 ar7240
-
-wr841n_v9_config : unconfig ap143_common_config
- @echo -e '\e[32m> Configuring for TP-Link TL-WR841N/D v9 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_QCA953X_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_TPLINK_WR841N_V9 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_ATH_GMAC_NMACS 2" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 12" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"TP-Link TL-WR841N/D v9\"" >> include/config.h
-
- @./mkconfig -a ap143 mips mips ap143 ar7240 ar7240
-
-zbt-we1526_config : unconfig ap143_common_config
- @echo -e '\e[32m> Configuring for Zbtlink ZBT-WE1526 at:' `date` '\e[0m'
- @echo "#define SOC_TYPE QCA_QCA953X_SOC" >> include/config.h
- @echo "#define CONFIG_FOR_ZBTLINK_ZBT_WE1526 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_ATH_GMAC_NMACS 2" >> include/config.h
- @echo "#define CONFIG_DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN 17" >> include/config.h
- @echo "#define CONFIG_GPIO_RESET_BTN_ACTIVE_LOW 1" >> include/config.h
- @echo "#define CONFIG_BOARD_CUSTOM_STRING \"Zbtlink ZBT-WE1526\"" >> include/config.h
-
- @./mkconfig -a ap143 mips mips ap143 ar7240 ar7240
-
-#########################################################################
-#########################################################################
-#########################################################################
+ @$(call include_add,soc/soc_list.h)
+ @$(call define_add,CONFIG_BOOTDELAY,1)
+ @$(call define_add,CONFIG_SILENT_CONSOLE,1)
+ @$(call define_add,CFG_CONSOLE_INFO_QUIET,1)
+ @$(call define_add,CONFIG_MAX_BUTTON_PRESSING,10)
+ @$(call define_add,CONFIG_DELAY_TO_AUTORUN_HTTPD,3)
+ @$(call define_add,CONFIG_DELAY_TO_AUTORUN_CONSOLE,5)
+ @$(call define_add,CONFIG_DELAY_TO_AUTORUN_NETCONSOLE,7)
+
+ar933x_common: unconfig config_common
+ @$(call define_add,CONFIG_MACH_HORNET,1)
+
+ar934x_common: unconfig config_common
+ @$(call define_add,CONFIG_WASP,1)
+ @$(call define_add,CONFIG_WASP_SUPPORT,1)
+
+qca953x_common: unconfig config_common
+ @$(call define_add,CONFIG_ATHEROS,1)
+ @$(call define_add,CONFIG_MACH_QCA953x,1)
+
+# =============================
+# TARGETS IN ALPHABETICAL ORDER
+# =============================
+
+8devices_carambola2: ar933x_common
+ @$(call config_init,8devices Carambola 2,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_8DEVICES_CARAMBOLA2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+d-link_dir-505: ar933x_common
+ @$(call config_init,D-Link DIR-505,8,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_DLINK_DIR505_A1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+dragino_v2_ms14: ar933x_common
+ @$(call config_init,Dragino v2 (MS14),16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_DRAGINO_V2,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_ART_UPGRADE,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_UBOOT_UPGRADE,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+gainstrong_oolite_v1_dev: ar933x_common
+ @$(call config_init,Gainstrong Oolite v1 (dev board),16,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GS_OOLITE_V1_DEV,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+gl-innovations_gl-inet-6416: ar933x_common
+ @$(call config_init,GL-Innovations GL.iNet 6416,8,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GL_INET,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr10u: ar933x_common
+ @$(call config_init,TP-Link TL-MR10U,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR10U_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr13u: ar933x_common
+ @$(call config_init,TP-Link TL-MR13U,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR13U_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3020: ar933x_common
+ @$(call config_init,TP-Link TL-MR3020,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3020_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3040: ar933x_common
+ @$(call config_init,TP-Link TL-MR3040,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3040_V1V2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3220_v2: ar933x_common
+ @$(call config_init,TP-Link TL-MR3220 v2,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3220_V2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3420_v2: ar934x_common
+ @$(call config_init,TP-Link TL-MR3420 v2,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3420_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wa830re_v2_tl-wa801nd_v2: ar934x_common
+ @$(call config_init,TP-Link TL-WA830RE/TL-WA801ND v2,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WA830RE_V2_WA801ND_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wdr3500: ar934x_common
+ @$(call config_init,TP-Link TL-WDR3500,8,16,1,QCA_AR9344_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WDR3500_V1,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wdr3600_tl-43x0: ar934x_common
+ @$(call config_init,TP-Link TL-WDR3600/43x0,8,16,1,QCA_AR9344_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WDR3600_WDR43X0_V1,1)
+ @$(call define_add,CFG_ATHRS17_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,1)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(call define_add,CFG_DUAL_PHY_SUPPORT,1)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wr703n: ar933x_common
+ @$(call config_init,TP-Link TL-WR703N,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR703N_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr710n: ar933x_common
+ @$(call config_init,TP-Link TL-WR710N,8,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR710N_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr720n_v3_CN: ar933x_common
+ @$(call config_init,TP-Link TL-WR720N v3 CN,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR720N_V3,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr740n_v4: ar933x_common
+ @$(call config_init,TP-Link TL-WR74xN/D v4,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR740N_V4,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr802n: qca953x_common
+ @$(call config_init,TP-Link TL-WR802N,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR802N,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr820n_CN: qca953x_common
+ @$(call config_init,TP-Link TL-WR820N CN,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR820N_CN,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr841n_v8: ar934x_common
+ @$(call config_init,TP-Link TL-WR841N/D v8,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V8,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wr841n_v9: qca953x_common
+ @$(call config_init,TP-Link TL-WR841N/D v9,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V9,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+unwireddevices_unwired-one: ar933x_common
+ @$(call config_init,Black Swift aka Unwired One,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_BLACK_SWIFT_BOARD,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+village-telco_mesh-potato_v2: ar933x_common
+ @$(call config_init,Village Telco Mesh Potato 2,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_MESH_POTATO_V2,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_ART_UPGRADE,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_UBOOT_UPGRADE,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+wallys_dr531: qca953x_common
+ @$(call config_init,Wallys DR531,8,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_WALLYS_DR531,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+zbtlink_zbt-we1526: qca953x_common
+ @$(call config_init,Zbtlink ZBT-WE1526,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_ZBTLINK_ZBT_WE1526,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+# =============
+# CLEAN TARGETS
+# =============
clean:
- @echo -e "\e[32m> Making $@...\e[0m"
+ @$(call echo_green,Making $@...)
@find . -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name .depend \) -print \
@rm -f lib_bootstrap/*.a
@rm -f bootstrap bootstrap.bin tuboot.bin u-boot.lzimg u-boot.bin.lzma bootstrap.map
-clobber: clean
- @echo -e "\e[32m> Making $@...\e[0m"
+clobber: clean
+ @$(call echo_green,Making $@...)
@find . -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- @rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
+ @rm -f $(OBJS) *.bak include/version_autogenerated.h
@rm -fr *.*~
@rm -f u-boot u-boot.map u-boot.hex $(ALL)
@rm -f tools/crc32.c tools/environment.c
- @rm -f cpu/mpc824x/bedbug_603e.c
@rm -f include/asm/proc include/asm/arch include/asm
-mrproper \
-distclean: clobber unconfig
-
-backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
- gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
-
-#########################################################################
+distclean: clobber unconfig
projects / oweals / u-boot_mod.git / commitdiff