ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods

Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/arch/arm/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f17b5a7ca9a3573b0491979617038..0fd7f2e24d9ca20bda5381f9156795352cd156e8 100644 (file)
--- a/arch/arm/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
-       phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
        clocks = <&clks IMX6QDL_CLK_ENET>,
                 <&clks IMX6QDL_CLK_ENET>,
                 <&clks IMX6QDL_CLK_ENET_REF>;
-       phy-mode = "rmii";
        status = "okay";
 };