CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC.
Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT,
Analog audio codec, touch screen controller, LED.
Add basic support including:
LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
bool "CompuLab CM-T3530 and CM-T3730 boards"
select SUPPORT_SPL
+config TARGET_CM_T3517
+ bool "CompuLab CM-T3517 boards"
+
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select SUPPORT_SPL
source "board/ti/sdp3430/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
+source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
--- /dev/null
+if TARGET_CM_T3517
+
+config SYS_BOARD
+ default "cm_t3517"
+
+config SYS_VENDOR
+ default "compulab"
+
+config SYS_CONFIG_NAME
+ default "cm_t3517"
+
+endif
--- /dev/null
+CM_T3517 BOARD
+M: Igor Grinberg <grinberg@compulab.co.il>
+S: Maintained
+F: board/compulab/cm_t3517/
+F: include/configs/cm_t3517.h
+F: configs/cm_t3517_defconfig
--- /dev/null
+#
+# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Authors: Igor Grinberg <grinberg@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cm_t3517.o mux.o
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <status_led.h>
+#include <mmc.h>
+#include <linux/compiler.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/am35x_def.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+
+#include "../common/common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T3517 board",
+ "NAND 128/512M",
+};
+
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ cl_print_pcb_info();
+ dieid_num_r();
+
+ return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T35_CD_GPIO 144
+#define SB_T35_WP_GPIO 59
+
+int board_mmc_init(bd_t *bis)
+{
+ return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO);
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+void set_muxconf_regs(void)
+{
+ /* SDRC */
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7));
+
+ /* GPMC */
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
+
+ /* SB-T35 SD/MMC WP GPIO59 */
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
+ /* SB-T35 Audio Enable GPIO61 */
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0));
+
+ /* UART3 Console */
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
+ /* RTC V3020 nCS GPIO163 */
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/
+
+ /* SB-T35 SD/MMC CD GPIO144 */
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/
+ /* WIFI nRESET GPIO145 */
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/
+
+ /* MMC1 */
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
+
+ /* I2C */
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
+
+ /* Green LED GPIO186 */
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/
+
+ /* RTC V3020 CS Enable GPIO160 */
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/
+
+ /* SYS_BOOT */
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/
+}
--- /dev/null
+CONFIG_SPL=n
++S:CONFIG_ARM=y
++S:CONFIG_OMAP34XX=y
++S:CONFIG_TARGET_CM_T3517=y
--- /dev/null
+/*
+ * (C) Copyright 2013 CompuLab, Ltd.
+ * Author: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * Configuration settings for the CompuLab CM-T3517 board
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_CM_T3517 /* working with CM-T3517 */
+#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+/*
+ * This is needed for the DMA stuff.
+ * Although the default iss 64, we still define it
+ * to be on the safe side once the default is changed.
+ */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ 0x4000
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+
+#define CONFIG_OMAP_GPIO
+
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
+ "1920k(u-boot),256k(u-boot-env),"\
+ "4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_GPIO
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_BUS 0
+#define CONFIG_I2C_MULTI_BUS
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access nand at */
+ /* CS0 */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
+ /* devices */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "baudrate=115200\0" \
+ "console=ttyO2,115200n8\0" \
+ "mpurate=auto\0" \
+ "vram=12M\0" \
+ "dvimode=1024x768MR-16@60\0" \
+ "defaultdisplay=dvi\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+ "mmcrootfstype=ext4\0" \
+ "nandroot=/dev/mtdblock4 rw\0" \
+ "nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 2a0000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD "no"
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "CM-T3517 # "
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
+
+/*
+ * AM3517 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define CONFIG_SYS_CS0_SIZE (256 << 20)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_NAND
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Status LED */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */
+#define GREEN_LED_DEV 0
+#define STATUS_LED_BIT GREEN_LED_GPIO
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT GREEN_LED_DEV
+
+/* GPIO banks */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
+#endif
+
+#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff