sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards
authorHans de Goede <hdegoede@redhat.com>
Thu, 31 Mar 2016 12:38:14 +0000 (14:38 +0200)
committerHans de Goede <hdegoede@redhat.com>
Thu, 31 Mar 2016 12:38:14 +0000 (14:38 +0200)
LDO3 and LDO4 are used to power port E resp. port G, which are exposed
on gpio headers, so enable them at 2.8V as specified in the schematic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
configs/A10-OLinuXino-Lime_defconfig
configs/A20-OLinuXino-Lime2_defconfig
configs/A20-OLinuXino-Lime_defconfig

index af96f5bd121554f101055e7e11c2aa3d4d919eaf..25b48d9cb5346cebd99ec8feb43692758c76dab2 100644 (file)
@@ -13,4 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y
index 62a83388bed0b45d24ddc6f953272b3f8f075a0d..419cdfb5ee1417993c478147c96cd20917b6595b 100644 (file)
@@ -15,4 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_CMD_GPIO=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y
index e27698d0dd7df055b4c1439b218550d726f16ef8..151a0a3d3a73391548f29599b56a4eed2d26f37e 100644 (file)
@@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y