fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP

Add PCIE analog parameters initialization values according to
latest ETP.

Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index df605712394891c037bf6d1ee4886601629bace8..3ac405a9be6ee44c87cb8139d255cf084ca028f1 100644 (file)
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -232,6 +232,8 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
                mask |= HPIPE_MISC_REFCLK_SEL_MASK;
                data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
        }
+       mask |= HPIPE_MISC_ICP_FORCE_MASK;
+       data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
        reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
        if (pcie_clk) { /* output */
                /* Set reference frequcency select - 0x2 for 25MHz*/
@@ -267,6 +269,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
        /* Set Maximal PHY Generation Setting(8Gbps) */
        mask = HPIPE_INTERFACE_GEN_MAX_MASK;
        data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
+       /* Bypass frame detection and sync detection for RX DATA */
+       mask = HPIPE_INTERFACE_DET_BYPASS_MASK;
+       data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET;
        /* Set Link Train Mode (Tx training control pins are used) */
        mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
        data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
@@ -351,9 +356,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
        data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
        reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
 
-       /* Force DFE resolution (use GEN table value) */
+       /* Use TX/RX training result for DFE */
        mask = HPIPE_DFE_RES_FORCE_MASK;
-       data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+       data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
        reg_set(hpipe_addr + HPIPE_DFE_REG0,  data, mask);
 
        /* Configure initial and final coefficient value for receiver */
@@ -379,9 +384,64 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
        data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
 
        mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
-       data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+       data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
        reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
 
+       /* Pattern lock lost timeout disable */
+       mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+       data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+       reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+       /* Configure DFE adaptations */
+       mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
+       data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
+       mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
+       data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
+       mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
+       data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
+       reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+       mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
+       data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
+       reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask);
+
+       /* Genration 2 setting 1*/
+       mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+       data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+       mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+       data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+       mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+       data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+       reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+       /* DFE enable */
+       mask = HPIPE_G2_DFE_RES_MASK;
+       data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
+       reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask);
+
+       /* Configure DFE Resolution */
+       mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
+       data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
+       reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+
+       /* VDD calibration control */
+       mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+       data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+       reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+       /* Set PLL Charge-pump Current Control */
+       mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
+       data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
+       reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask);
+
+       /* Set lane rqualization remote setting */
+       mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
+       data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
+       mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
+       data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
+       mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
+       data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
+       reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask);
+
        if (!is_end_point) {
                /* Set phy in root complex mode */
                mask = HPIPE_CFG_PHY_RC_EP_MASK;

diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h
index 5edd0adf6cf99366c83bbf6f68e86239d92b6429..fbceb2a403d70628366f0c8e1ee3c22b667a99a2 100644 (file)
--- a/drivers/phy/marvell/comphy_hpipe.h
+++ b/drivers/phy/marvell/comphy_hpipe.h
@@ -227,6 +227,9 @@
 #define HPIPE_INTERFACE_GEN_MAX_OFFSET         10
 #define HPIPE_INTERFACE_GEN_MAX_MASK           \
        (0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET      12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK                \
+       (0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
 #define HPIPE_INTERFACE_LINK_TRAIN_OFFSET      14
 #define HPIPE_INTERFACE_LINK_TRAIN_MASK                \
        (0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
@@ -444,6 +447,17 @@
 #define HPIPE_TX_TRAIN_PAT_SEL_MASK            \
        (0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET)
 
+#define HPIPE_CDR_CONTROL_REG                  0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET    12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK      \
+       (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET       9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK         \
+       (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET       6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK         \
+       (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+
 #define HPIPE_TX_TRAIN_CTRL_11_REG             0x438
 #define HPIPE_TX_STATUS_CHECK_MODE_OFFSET      6
 #define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK     \
@@ -481,7 +495,11 @@
        (0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET)
 
 #define HPIPE_G2_SETTINGS_3_REG                        0x448
-#define HPIPE_G2_SETTINGS_4_REG                        0x44C
+
+#define HPIPE_G2_SETTINGS_4_REG                        0x44c
+#define HPIPE_G2_DFE_RES_OFFSET                        8
+#define HPIPE_G2_DFE_RES_MASK                  \
+       (0x3 << HPIPE_G2_DFE_RES_OFFSET)
 
 #define HPIPE_G3_SETTING_3_REG                 0x450
 #define HPIPE_G3_FFE_CAP_SEL_OFFSET            0
@@ -510,6 +528,11 @@
 #define HPIPE_TX_PRESET_INDEX_MASK             \
        (0xf << HPIPE_TX_PRESET_INDEX_OFFSET)
 
+#define HPIPE_DFE_CONTROL_REG                  0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET      14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK                \
+       (0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
 #define HPIPE_DFE_CTRL_28_REG                  0x49C
 #define HPIPE_DFE_CTRL_28_PIPE4_OFFSET         7
 #define HPIPE_DFE_CTRL_28_PIPE4_MASK           \
@@ -520,6 +543,11 @@
 #define HPIPE_G1_SETTING_5_G1_ICP_MASK         \
        (0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
 
+#define HPIPE_G3_SETTING_5_REG                 0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET       0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK         \
+       (0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
 #define HPIPE_LANE_CONFIG0_REG                 0x600
 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET    0
 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK      \
@@ -542,6 +570,9 @@
 #define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET                0
 #define HPIPE_LANE_CFG4_DFE_CTRL_MASK          \
        (0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET      3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK                \
+       (0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
 #define HPIPE_LANE_CFG4_DFE_OVER_OFFSET                6
 #define HPIPE_LANE_CFG4_DFE_OVER_MASK          \
        (0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET)
@@ -559,6 +590,17 @@
 #define HPIPE_CFG_UPDATE_POLARITY_MASK         \
        (0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
 
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG       0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET        0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK  \
+       (0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET   1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK      \
+       (0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET        2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK  \
+       (0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
 #define HPIPE_RST_CLK_CTRL_REG                 0x704
 #define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET     0
 #define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK       \