This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
config TARGET_PM520
bool "Support PM520"
-config TARGET_TOTAL5200
- bool "Support Total5200"
-
config TARGET_V38B
bool "Support v38b"
source "board/munices/Kconfig"
source "board/phytec/pcm030/Kconfig"
source "board/pm520/Kconfig"
-source "board/total5200/Kconfig"
source "board/tqc/tqm5200/Kconfig"
source "board/v38b/Kconfig"
+++ /dev/null
-if TARGET_TOTAL5200
-
-config SYS_BOARD
- default "total5200"
-
-config SYS_CONFIG_NAME
- default "Total5200"
-
-endif
+++ /dev/null
-TOTAL5200 BOARD
-#M: -
-S: Maintained
-F: board/total5200/
-F: include/configs/Total5200.h
-F: configs/Total5200_defconfig
-F: configs/Total5200_lowboot_defconfig
-F: configs/Total5200_Rev2_defconfig
-F: configs/Total5200_Rev2_lowboot_defconfig
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := total5200.o sdram.o
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Micron MT48LC32M16A2-75 is compatible to:
- * - Infineon HYB39S512160AT-75
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x514F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-#include "sdram.h"
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000000 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- if (sdram_conf->ddr) {
- /* set mode register: extended mode */
- *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->emode;
- __asm__ volatile ("sync");
-
- /* set mode register: reset DLL */
- *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode | 0x04000000;
- __asm__ volatile ("sync");
- }
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000004 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode;
- __asm__ volatile ("sync");
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | hi_addr_bit;
- __asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
- ulong dramsize = 0;
- ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
- __asm__ volatile ("sync");
-
- if (sdram_conf->ddr) {
- /* set tap delay */
- *(vu_long *)MPC5XXX_CDM_PORCFG = sdram_conf->tapdelay;
- __asm__ volatile ("sync");
- }
-
- /* find RAM size using SDRAM CS0 only */
- mpc5xxx_sdram_start(sdram_conf, 0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- mpc5xxx_sdram_start(sdram_conf, 1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- mpc5xxx_sdram_start(sdram_conf, 0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
- }
-
- /* let SDRAM CS1 start right after CS0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
- /* find RAM size using SDRAM CS1 only */
- mpc5xxx_sdram_start(sdram_conf, 0);
- test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
- mpc5xxx_sdram_start(sdram_conf, 1);
- test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
- if (test1 > test2) {
- mpc5xxx_sdram_start(sdram_conf, 0);
- dramsize2 = test1;
- } else {
- dramsize2 = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize2 < (1 << 20)) {
- dramsize2 = 0;
- }
-
- /* set SDRAM CS1 size according to the amount of RAM found */
- if (dramsize2 > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
- | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
- if (dramsize2 >= 0x13) {
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- } else {
- dramsize2 = 0;
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize + dramsize2;
-}
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-typedef struct {
- ulong ddr;
- ulong mode;
- ulong emode;
- ulong control;
- ulong config1;
- ulong config2;
- ulong tapdelay;
-} sdram_conf_t;
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <netdev.h>
-
-#include "sdram.h"
-
-#if CONFIG_TOTAL5200_REV==2
-#include "mt48lc32m16a2-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-phys_size_t initdram (int board_type)
-{
- sdram_conf_t sdram_conf;
-
- sdram_conf.ddr = SDRAM_DDR;
- sdram_conf.mode = SDRAM_MODE;
- sdram_conf.emode = 0;
- sdram_conf.control = SDRAM_CONTROL;
- sdram_conf.config1 = SDRAM_CONFIG1;
- sdram_conf.config2 = SDRAM_CONFIG2;
- sdram_conf.tapdelay = 0;
- return mpc5xxx_sdram_init (&sdram_conf);
-}
-
-int checkboard (void)
-{
-#if CONFIG_TOTAL5200_REV==2
- puts ("Board: Total5200 Rev.2 ");
-#else
- puts ("Board: Total5200 ");
-#endif
-
- /*
- * Retrieve FPGA Revision.
- */
- printf ("(FPGA %08lX)\n", *(vu_long *) (CONFIG_SYS_FPGA_BASE + 0x400));
-
- /*
- * Take all peripherals in power-up mode.
- */
-#if CONFIG_TOTAL5200_REV==2
- *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x46) = 0x70;
-#else
- *(vu_long *) (CONFIG_SYS_CPLD_BASE + 0x400) = 0x70;
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-/* IRDA_1 aka PSC6_3 (pin C13) */
-#define GPIO_IRDA_1 0x20000000UL
-
-void init_ide_reset (void)
-{
- debug ("init_ide_reset\n");
-
- /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
- *(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
- *(vu_long *) MPC5XXX_GPIO_DIR |= GPIO_IRDA_1;
-}
-
-void ide_set_reset (int idereset)
-{
- debug ("ide_reset(%d)\n", idereset);
-
- if (idereset) {
- *(vu_long *) MPC5XXX_GPIO_DATA_O &= ~GPIO_IRDA_1;
- } else {
- *(vu_long *) MPC5XXX_GPIO_DATA_O |= GPIO_IRDA_1;
- }
-}
-#endif
-
-#ifdef CONFIG_VIDEO_SED13806
-#include <sed13806.h>
-
-#define DISPLAY_WIDTH 640
-#define DISPLAY_HEIGHT 480
-
-#ifdef CONFIG_VIDEO_SED13806_8BPP
-#error CONFIG_VIDEO_SED13806_8BPP not supported.
-#endif /* CONFIG_VIDEO_SED13806_8BPP */
-
-#ifdef CONFIG_VIDEO_SED13806_16BPP
-static const S1D_REGS init_regs [] =
-{
- {0x0001,0x00}, /* Miscellaneous Register */
- {0x01FC,0x00}, /* Display Mode Register */
- {0x0004,0x00}, /* General IO Pins Configuration Register 0 */
- {0x0005,0x00}, /* General IO Pins Configuration Register 1 */
- {0x0008,0x00}, /* General IO Pins Control Register 0 */
- {0x0009,0x00}, /* General IO Pins Control Register 1 */
- {0x0010,0x02}, /* Memory Clock Configuration Register */
- {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */
- {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */
- {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
- {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
- {0x0021,0x03}, /* DRAM Refresh Rate Register */
- {0x002A,0x00}, /* DRAM Timings Control Register 0 */
- {0x002B,0x01}, /* DRAM Timings Control Register 1 */
- {0x0020,0x80}, /* Memory Configuration Register */
- {0x0030,0x25}, /* Panel Type Register */
- {0x0031,0x00}, /* MOD Rate Register */
- {0x0032,0x4F}, /* LCD Horizontal Display Width Register */
- {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */
- {0x0035,0x01}, /* TFT FPLINE Start Position Register */
- {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
- {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */
- {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */
- {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */
- {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */
- {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
- {0x0040,0x05}, /* LCD Display Mode Register */
- {0x0041,0x00}, /* LCD Miscellaneous Register */
- {0x0042,0x00}, /* LCD Display Start Address Register 0 */
- {0x0043,0x00}, /* LCD Display Start Address Register 1 */
- {0x0044,0x00}, /* LCD Display Start Address Register 2 */
- {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */
- {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */
- {0x0048,0x00}, /* LCD Pixel Panning Register */
- {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
- {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
- {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
- {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
- {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
- {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
- {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
- {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
- {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
- {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
- {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
- {0x005B,0x10}, /* TV Output Control Register */
- {0x0060,0x05}, /* CRT/TV Display Mode Register */
- {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
- {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
- {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
- {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */
- {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */
- {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
- {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
- {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
- {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
- {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
- {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
- {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
- {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
- {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
- {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
- {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
- {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
- {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
- {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
- {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
- {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
- {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
- {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
- {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
- {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
- {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
- {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
- {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
- {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
- {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
- {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
- {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
- {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
- {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
- {0x0100,0x00}, /* BitBlt Control Register 0 */
- {0x0101,0x00}, /* BitBlt Control Register 1 */
- {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
- {0x0103,0x00}, /* BitBlt Operation Register */
- {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
- {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
- {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
- {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
- {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
- {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
- {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
- {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
- {0x0110,0x00}, /* BitBlt Width Register 0 */
- {0x0111,0x00}, /* BitBlt Width Register 1 */
- {0x0112,0x00}, /* BitBlt Height Register 0 */
- {0x0113,0x00}, /* BitBlt Height Register 1 */
- {0x0114,0x00}, /* BitBlt Background Color Register 0 */
- {0x0115,0x00}, /* BitBlt Background Color Register 1 */
- {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
- {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
- {0x01E0,0x00}, /* Look-Up Table Mode Register */
- {0x01E2,0x00}, /* Look-Up Table Address Register */
- {0x01E4,0x00}, /* Look-Up Table Data Register */
- {0x01F0,0x00}, /* Power Save Configuration Register */
- {0x01F1,0x00}, /* Power Save Status Register */
- {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
- {0x01FC,0x01}, /* Display Mode Register */
- {0, 0}
-};
-#endif /* CONFIG_VIDEO_SED13806_16BPP */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/* Return text to be printed besides the logo. */
-void video_get_info_str (int line_number, char *info)
-{
- if (line_number == 1) {
-#if CONFIG_TOTAL5200_REV==1
- strcpy (info, " Total5200");
-#elif CONFIG_TOTAL5200_REV==2
- strcpy (info, " Total5200 Rev.2");
-#else
-#error CONFIG_TOTAL5200_REV must be 1 or 2.
-#endif
- } else {
- info [0] = '\0';
- }
-}
-#endif
-
-/* Returns SED13806 base address. First thing called in the driver. */
-unsigned int board_video_init (void)
-{
- return CONFIG_SYS_LCD_BASE;
-}
-
-/* Called after initializing the SED13806 and before clearing the screen. */
-void board_validate_screen (unsigned int base)
-{
-}
-
-/* Return a pointer to the initialization sequence. */
-const S1D_REGS *board_get_regs (void)
-{
- return init_regs;
-}
-
-int board_get_width (void)
-{
- return DISPLAY_WIDTH;
-}
-
-int board_get_height (void)
-{
- return DISPLAY_HEIGHT;
-}
-
-#endif /* CONFIG_VIDEO_SED13806 */
-
-int board_eth_init(bd_t *bis)
-{
- cpu_eth_init(bis); /* Built in FEC comes first */
- return pci_eth_init(bis);
-}
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=2"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_TOTAL5200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=2,SYS_TEXT_BASE=0xFE000000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_TOTAL5200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=1"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_TOTAL5200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="TOTAL5200_REV=1,SYS_TEXT_BASE=0xFE000000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_TOTAL5200=y
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+Total5200 powerpc mpc5xxx - -
CATcenter powerpc ppc4xx - -
PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <andrea.marson@dave-tech.it>
P2020DS powerpc mpc85xx - -
*/
if (fec->xcv_type == SEVENWIRE) {
/* 10MBit with 7-wire operation */
-#if defined(CONFIG_TOTAL5200)
- /* 7-wire and USB2 on Ethernet */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000;
-#else /* !CONFIG_TOTAL5200 */
/* 7-wire only */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000;
-#endif /* CONFIG_TOTAL5200 */
} else {
/* 100MBit with MD operation */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000;
* Defines for the SED13806 driver
*/
#ifdef CONFIG_VIDEO_SED13806
-
-#ifndef CONFIG_TOTAL5200
#define VIDEO_FB_LITTLE_ENDIAN
-#endif
#define VIDEO_HW_RECTFILL
#define VIDEO_HW_BITBLT
#endif
#define writeByte(ptrReg,value) \
*(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
-#ifdef CONFIG_TOTAL5200
-#define writeWord(ptrReg,value) \
- (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = value)
-#else
#define writeWord(ptrReg,value) \
(*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
-#endif
GraphicDevice sed13806;
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Check valid setting of revision define.
- * Total5100 and Total5200 Rev.1 are identical except for the processor.
- */
-#if (CONFIG_TOTAL5200_REV!=1 && CONFIG_TOTAL5200_REV!=2)
-#error CONFIG_TOTAL5200_REV must be 1 or 2
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
-#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFFF00000 boot high (standard configuration)
- * 0xFE000000 boot low
- * 0x00100000 boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Video console
- */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_SED13806
-#define CONFIG_VIDEO_SED13806_16BPP
-
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-/* #define CONFIG_VIDEO_BMP_LOGO */
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_SPLASH_SCREEN
-
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1
-#define CONFIG_PCI_SCAN_SHOW 1
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-
-#define CONFIG_PCI_MEM_BUS 0x40000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x50000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_MII 1
-#define CONFIG_EEPRO100 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_NS8382X 1
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/* USB */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */
-# define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT \
- "setenv stdout serial;setenv stderr serial;" \
- "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- "bootfile=/tftpboot/MPC5200/uImage\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-/*
- * IPB Bus clocking configuration.
- */
-#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#if CONFIG_TOTAL5200_REV==2
-# define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START }
-#else
-# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
-#endif
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#if CONFIG_TOTAL5200_REV==1
-# define CONFIG_SYS_FLASH_BASE 0xFE000000
-# define CONFIG_SYS_FLASH_SIZE 0x02000000
-#elif CONFIG_TOTAL5200_REV==2
-# define CONFIG_SYS_FLASH_BASE 0xFA000000
-# define CONFIG_SYS_FLASH_SIZE 0x06000000
-#endif /* CONFIG_TOTAL5200_REV */
-
-#if defined(CONFIG_SYS_LOWBOOT)
-# define CONFIG_ENV_ADDR 0xFE040000
-#else /* CONFIG_SYS_LOWBOOT */
-# define CONFIG_ENV_ADDR 0xFFF40000
-#endif /* CONFIG_SYS_LOWBOOT */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x40000
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-#define CONFIG_SYS_MBAR 0xF0000000 /* 64 kB */
-#define CONFIG_SYS_FPGA_BASE 0xF0010000 /* 64 kB */
-#define CONFIG_SYS_CPLD_BASE 0xF0020000 /* 64 kB */
-#define CONFIG_SYS_LCD_BASE 0xF1000000 /* 4096 kB */
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_MPC5xxx_FEC_SEVENWIRE
-/* dummy, 7-wire FEC does not have phy address */
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * GPIO configuration
- *
- * CS1: SDRAM CS1 disabled, gpio_wkup_6 enabled 0
- * Reserved 0
- * ALTs: CAN1/2 on PSC2, SPI on PSC3 00
- * CS7: Interrupt GPIO on PSC3_5 0
- * CS8: Interrupt GPIO on PSC3_4 0
- * ATA: reset default, changed in ATA driver 00
- * IR_USB_CLK: IrDA/USB 48MHz clock gen. int., pin is GPIO 0
- * IRDA: reset default, changed in IrDA driver 000
- * ETHER: reset default, changed in Ethernet driver 0000
- * PCI_DIS: reset default, changed in PCI driver 0
- * USB_SE: reset default, changed in USB driver 0
- * USB: reset default, changed in USB driver 00
- * PSC3: SPI and UART functionality without CD 1100
- * Reserved 0
- * PSC2: CAN1/2 001
- * Reserved 0
- * PSC1: reset default, changed in AC'97 driver 000
- *
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000C10
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#if CONFIG_TOTAL5200_REV==1
-# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */
-# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
-# define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_CS0_SIZE 0x02000000 /* 32 MB */
-#else
-# define CONFIG_SYS_BOOTCS_START (CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE)
-# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */
-# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
-# define CONFIG_SYS_CS4_START (CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE)
-# define CONFIG_SYS_CS4_SIZE 0x02000000 /* 32 MB */
-# define CONFIG_SYS_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
-# define CONFIG_SYS_CS5_START CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_CS5_SIZE 0x02000000 /* 32 MB */
-# define CONFIG_SYS_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
-#endif
-
-#define CONFIG_SYS_CS1_START CONFIG_SYS_FPGA_BASE
-#define CONFIG_SYS_CS1_SIZE 0x00010000 /* 64 kB */
-#define CONFIG_SYS_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
-
-#define CONFIG_SYS_CS2_START CONFIG_SYS_LCD_BASE
-#define CONFIG_SYS_CS2_SIZE 0x00400000 /* 4096 kB */
-#define CONFIG_SYS_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
-
-#if CONFIG_TOTAL5200_REV==1
-# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE
-# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */
-# define CONFIG_SYS_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */
-#else
-# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE
-# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */
-# define CONFIG_SYS_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */
-#endif
-
-#define CONFIG_SYS_CS_BURST 0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00001000
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
- */
-
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_ATA_CS_ON_I2C2
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
-
-/* Interval between registers */
-#define CONFIG_SYS_ATA_STRIDE 4
-
-#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff