board: sama5d3_xplained: Enable early debug UART
authorWenyou Yang <wenyou.yang@atmel.com>
Fri, 14 Apr 2017 00:51:47 +0000 (08:51 +0800)
committerSimon Glass <sjg@chromium.org>
Sat, 15 Apr 2017 02:10:35 +0000 (20:10 -0600)
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
board/atmel/sama5d3_xplained/sama5d3_xplained.c
configs/sama5d3_xplained_mmc_defconfig
configs/sama5d3_xplained_nandflash_defconfig

index 15845ef2e7959b8a27f8746b4ba425607e1391a3..ba7f9f244342dd9779e2973bd4892005a97b5fef 100644 (file)
@@ -12,6 +12,7 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
+#include <debug_uart.h>
 #include <spl.h>
 #include <asm/arch/atmel_mpddrc.h>
 #include <asm/arch/at91_wdt.h>
@@ -65,12 +66,22 @@ static void sama5d3_xplained_mci0_hw_init(void)
 }
 #endif
 
-int board_early_init_f(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
 {
        at91_seriald_hw_init();
+}
+#endif
 
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+       debug_uart_init();
+#endif
        return 0;
 }
+#endif
 
 int board_init(void)
 {
index 921b6a2112401e170fec62ff212d9cd19e6783c6..d28d1d9a331a750164aab99462c29653b9eea5bf 100644 (file)
@@ -54,6 +54,12 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
index 042f6a78e736cbc657181cc22d45095e92b35975..8cc8169de5660c48d53a09954920f66e078fb7c8 100644 (file)
@@ -51,6 +51,12 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y