#!/usr/bin/env perl
# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# February 2011.
#
# Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~16.4 cycles per processed byte.
+# improvement on Cortex A8 core and ~15.4 cycles per processed byte.
+
+# September 2013.
+#
+# Add NEON implementation. On Cortex A8 it was measured to process one
+# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
+# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
+# code (meaning that latter performs sub-optimally, nothing was done
+# about it).
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
# if $i==15
str $inp,[sp,#17*4] @ make room for $t4
# endif
- mov $t0,$e,ror#$Sigma1[0]
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
add $a,$a,$t2 @ h+=Maj(a,b,c) from the past
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
rev $t1,$t1
- eor $t0,$t0,$e,ror#$Sigma1[1]
#else
@ ldrb $t1,[$inp,#3] @ $i
add $a,$a,$t2 @ h+=Maj(a,b,c) from the past
# if $i==15
str $inp,[sp,#17*4] @ make room for $t4
# endif
- mov $t0,$e,ror#$Sigma1[0]
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
orr $t1,$t1,$t2,lsl#24
- eor $t0,$t0,$e,ror#$Sigma1[1]
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
#endif
___
$code.=<<___;
add $h,$h,$t1 @ h+=X[i]
str $t1,[sp,#`$i%16`*4]
eor $t1,$f,$g
- eor $t0,$t0,$e,ror#$Sigma1[2] @ Sigma1(e)
+ add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e)
and $t1,$t1,$e
- add $h,$h,$t0 @ h+=Sigma1(e)
- eor $t1,$t1,$g @ Ch(e,f,g)
add $h,$h,$t2 @ h+=K256[i]
- mov $t0,$a,ror#$Sigma0[0]
+ eor $t1,$t1,$g @ Ch(e,f,g)
+ eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
add $h,$h,$t1 @ h+=Ch(e,f,g)
#if $i==31
and $t2,$t2,#0xff
eor $t2,$a,$b @ a^b, b^c in next round
ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx
#endif
- eor $t0,$t0,$a,ror#$Sigma0[1]
+ eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a)
and $t3,$t3,$t2 @ (b^c)&=(a^b)
add $d,$d,$h @ d+=h
- eor $t0,$t0,$a,ror#$Sigma0[2] @ Sigma0(a)
eor $t3,$t3,$b @ Maj(a,b,c)
- add $h,$h,$t0 @ h+=Sigma0(a)
+ add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a)
@ add $h,$h,$t3 @ h+=Maj(a,b,c)
___
($t2,$t3)=($t3,$t2);
ldr $t4,[sp,#`($i+9)%16`*4]
add $t2,$t2,$t0
- mov $t0,$e,ror#$Sigma1[0] @ from BODY_00_15
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15
add $t1,$t1,$t2
- eor $t0,$t0,$e,ror#$Sigma1[1] @ from BODY_00_15
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
add $t1,$t1,$t4 @ X[i]
___
&BODY_00_15(@_);
.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
.size K256,.-K256
+.word 0 @ terminator
+.LOPENSSL_armcap:
+.word OPENSSL_armcap_P-sha256_block_data_order
+.align 5
.global sha256_block_data_order
.type sha256_block_data_order,%function
sha256_block_data_order:
sub r3,pc,#8 @ sha256_block_data_order
add $len,$inp,$len,lsl#6 @ len to point at the end of inp
+#if __ARM_ARCH__>=7
+ ldr r12,.LOPENSSL_armcap
+ ldr r12,[r3,r12] @ OPENSSL_armcap_P
+ tst r12,#1
+ bne .LNEON
+#endif
stmdb sp!,{$ctx,$inp,$len,r4-r11,lr}
ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
- sub $Ktbl,r3,#256 @ K256
+ sub $Ktbl,r3,#256+32 @ K256
sub sp,sp,#16*4 @ alloca(X[16])
.Loop:
# if __ARM_ARCH__>=7
moveq pc,lr @ be binary compatible with V4, yet
bx lr @ interoperable with Thumb ISA:-)
#endif
+___
+######################################################################
+# NEON stuff
+#
+{{{
+my @X=map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
+my $Xfer=$t4;
+my $j=0;
+
+sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; }
+sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; }
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+sub Xupdate()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ &vext_8 ($T0,@X[0],@X[1],4); # X[1..4]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vext_8 ($T1,@X[2],@X[3],4); # X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T2,$T0,$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T1,$T0,$sigma0[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T2,$T0,32-$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T3,$T0,$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T1,$T1,$T2);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T3,$T0,32-$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T1,$T1,$T3); # sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4); # sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vld1_32 ("{$T0}","[$Ktbl,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4); # sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 ($T0,$T0,@X[0]);
+ while($#insns>=2) { eval(shift(@insns)); }
+ &vst1_32 ("{$T0}","[$Xfer,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vld1_32 ("{$T0}","[$Ktbl,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vrev32_8 (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 ($T0,$T0,@X[0]);
+ foreach (@insns) { eval; } # remaining instructions
+ &vst1_32 ("{$T0}","[$Xfer,:128]!");
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub body_00_15 () {
+ (
+ '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+ '&add ($h,$h,$t1)', # h+=X[i]+K[i]
+ '&eor ($t1,$f,$g)',
+ '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+ '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past
+ '&and ($t1,$t1,$e)',
+ '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e)
+ '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+ '&eor ($t1,$t1,$g)', # Ch(e,f,g)
+ '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e)
+ '&eor ($t2,$a,$b)', # a^b, b^c in next round
+ '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a)
+ '&add ($h,$h,$t1)', # h+=Ch(e,f,g)
+ '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'.
+ '&ldr ($t1,"[$Ktbl]") if ($j==15);'.
+ '&ldr ($t1,"[sp,#64]") if ($j==31)',
+ '&and ($t3,$t3,$t2)', # (b^c)&=(a^b)
+ '&add ($d,$d,$h)', # d+=h
+ '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a)
+ '&eor ($t3,$t3,$b)', # Maj(a,b,c)
+ '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+ )
+}
+
+$code.=<<___;
+#if __ARM_ARCH__>=7
+.fpu neon
+.align 4
+.LNEON:
+ stmdb sp!,{r4-r12,lr}
+
+ mov $t2,sp
+ sub sp,sp,#16*4+16 @ alloca
+ sub $Ktbl,r3,#256+32 @ K256
+ bic sp,sp,#15 @ align for 128-bit stores
+
+ vld1.8 {@X[0]},[$inp]!
+ vld1.8 {@X[1]},[$inp]!
+ vld1.8 {@X[2]},[$inp]!
+ vld1.8 {@X[3]},[$inp]!
+ vld1.32 {$T0},[$Ktbl,:128]!
+ vld1.32 {$T1},[$Ktbl,:128]!
+ vld1.32 {$T2},[$Ktbl,:128]!
+ vld1.32 {$T3},[$Ktbl,:128]!
+ vrev32.8 @X[0],@X[0] @ yes, even on
+ str $ctx,[sp,#64]
+ vrev32.8 @X[1],@X[1] @ big-endian
+ str $inp,[sp,#68]
+ mov $Xfer,sp
+ vrev32.8 @X[2],@X[2]
+ str $len,[sp,#72]
+ vrev32.8 @X[3],@X[3]
+ str $t2,[sp,#76] @ save original sp
+ vadd.i32 $T0,$T0,@X[0]
+ vadd.i32 $T1,$T1,@X[1]
+ vst1.32 {$T0},[$Xfer,:128]!
+ vadd.i32 $T2,$T2,@X[2]
+ vst1.32 {$T1},[$Xfer,:128]!
+ vadd.i32 $T3,$T3,@X[3]
+ vst1.32 {$T2},[$Xfer,:128]!
+ vst1.32 {$T3},[$Xfer,:128]!
+
+ ldmia $ctx,{$A-$H}
+ sub $Xfer,$Xfer,#64
+ ldr $t1,[sp,#0]
+ eor $t2,$t2,$t2
+ eor $t3,$B,$C
+ b .L_00_48
+
+.align 4
+.L_00_48:
+___
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+$code.=<<___;
+ teq $t1,#0 @ check for K256 terminator
+ ldr $t1,[sp,#0]
+ sub $Xfer,$Xfer,#64
+ bne .L_00_48
+
+ ldr $inp,[sp,#68]
+ ldr $t0,[sp,#72]
+ sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl
+ teq $inp,$t0
+ subeq $inp,$inp,#64 @ avoid SEGV
+ vld1.8 {@X[0]},[$inp]! @ load next input block
+ vld1.8 {@X[1]},[$inp]!
+ vld1.8 {@X[2]},[$inp]!
+ vld1.8 {@X[3]},[$inp]!
+ strne $inp,[sp,#68]
+ mov $Xfer,sp
+___
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+$code.=<<___;
+ ldr $t0,[$t1,#0]
+ add $A,$A,$t2 @ h+=Maj(a,b,c) from the past
+ ldr $t2,[$t1,#4]
+ ldr $t3,[$t1,#8]
+ ldr $t4,[$t1,#12]
+ add $A,$A,$t0 @ accumulate
+ ldr $t0,[$t1,#16]
+ add $B,$B,$t2
+ ldr $t2,[$t1,#20]
+ add $C,$C,$t3
+ ldr $t3,[$t1,#24]
+ add $D,$D,$t4
+ ldr $t4,[$t1,#28]
+ add $E,$E,$t0
+ str $A,[$t1],#4
+ add $F,$F,$t2
+ str $B,[$t1],#4
+ add $G,$G,$t3
+ str $C,[$t1],#4
+ add $H,$H,$t4
+ str $D,[$t1],#4
+ stmia $t1,{$E-$H}
+
+ movne $Xfer,sp
+ ldrne $t1,[sp,#0]
+ eorne $t2,$t2,$t2
+ ldreq sp,[sp,#76] @ restore original sp
+ eorne $t3,$B,$C
+ bne .L_00_48
+
+ ldmia sp!,{r4-r12,pc}
+#endif
+___
+}}}
+$code.=<<___;
.size sha256_block_data_order,.-sha256_block_data_order
-.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
+.asciz "SHA256 block transform for ARMv4
/NEON, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
+.comm OPENSSL_armcap_P,4,4
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
projects / oweals / openssl.git / commitdiff