igep0033: Rename to igep003x
authorLadislav Michl <ladis@linux-mips.org>
Sat, 1 Apr 2017 15:17:16 +0000 (17:17 +0200)
committerTom Rini <trini@konsulko.com>
Mon, 8 May 2017 15:57:26 +0000 (11:57 -0400)
Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034)
can use the same source files.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
17 files changed:
arch/arm/Kconfig
arch/arm/mach-omap2/am33xx/Kconfig
board/isee/igep0033/Kconfig [deleted file]
board/isee/igep0033/MAINTAINERS [deleted file]
board/isee/igep0033/Makefile [deleted file]
board/isee/igep0033/board.c [deleted file]
board/isee/igep0033/board.h [deleted file]
board/isee/igep0033/mux.c [deleted file]
board/isee/igep003x/Kconfig [new file with mode: 0644]
board/isee/igep003x/MAINTAINERS [new file with mode: 0644]
board/isee/igep003x/Makefile [new file with mode: 0644]
board/isee/igep003x/board.c [new file with mode: 0644]
board/isee/igep003x/board.h [new file with mode: 0644]
board/isee/igep003x/mux.c [new file with mode: 0644]
configs/am335x_igep0033_defconfig
include/configs/am335x_igep0033.h [deleted file]
include/configs/am335x_igep003x.h [new file with mode: 0644]

index 513a35fc4e999aadbd4e344a194cd14f85fae623..08480ac36d3e92048592a8ecce23362c2e3d5750 100644 (file)
@@ -1102,7 +1102,7 @@ source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
 source "board/imx31_phycore/Kconfig"
-source "board/isee/igep0033/Kconfig"
+source "board/isee/igep003x/Kconfig"
 source "board/olimex/mx23_olinuxino/Kconfig"
 source "board/phytec/pcm051/Kconfig"
 source "board/ppcag/bg0900/Kconfig"
index cf5d95a26d028e524208b994e97153a9d4f00187..387d488c47854cad85c0d50cbf53d2c074f11e92 100644 (file)
@@ -44,8 +44,8 @@ config TARGET_AM335X_BALTOS
        select DM_SERIAL
        select DM_GPIO
 
-config TARGET_AM335X_IGEP0033
-       bool "Support am335x_igep0033"
+config TARGET_AM335X_IGEP003X
+       bool "Support am335x_igep003x"
        select DM
        select DM_SERIAL
        select DM_GPIO
diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig
deleted file mode 100644 (file)
index e989e4b..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_AM335X_IGEP0033
-
-config SYS_BOARD
-       default "igep0033"
-
-config SYS_VENDOR
-       default "isee"
-
-config SYS_SOC
-       default "am33xx"
-
-config SYS_CONFIG_NAME
-       default "am335x_igep0033"
-
-endif
diff --git a/board/isee/igep0033/MAINTAINERS b/board/isee/igep0033/MAINTAINERS
deleted file mode 100644 (file)
index bd8a1f2..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-IGEP0033 BOARD
-M:     Enric Balletbo i Serra <eballetbo@gmail.com>
-S:     Maintained
-F:     board/isee/igep0033/
-F:     include/configs/am335x_igep0033.h
-F:     configs/am335x_igep0033_defconfig
diff --git a/board/isee/igep0033/Makefile b/board/isee/igep0033/Makefile
deleted file mode 100644 (file)
index fc985b4..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile
-#
-# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-y  += mux.o
-endif
-
-obj-y  += board.o
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
deleted file mode 100644 (file)
index 5fea7ff..0000000
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Board functions for IGEP COM AQUILA based boards
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include "board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifdef CONFIG_SPL_BUILD
-static const struct ddr_data ddr3_data = {
-       .datardsratio0 = K4B2G1646EBIH9_RD_DQS,
-       .datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
-       .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
-       .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-       .cmd0csratio = K4B2G1646EBIH9_RATIO,
-       .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-       .cmd1csratio = K4B2G1646EBIH9_RATIO,
-       .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-       .cmd2csratio = K4B2G1646EBIH9_RATIO,
-       .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-       .sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
-       .ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
-       .sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
-       .sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
-       .sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
-       .zq_config = K4B2G1646EBIH9_ZQ_CFG,
-       .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
-};
-
-#define OSC    (V_OSCK/1000000)
-const struct dpll_params dpll_ddr = {
-               400, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
-       return &dpll_ddr;
-}
-
-void set_uart_mux_conf(void)
-{
-       enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-       enable_board_pin_mux();
-}
-
-const struct ctrl_ioregs ioregs = {
-       .cm0ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
-       .cm1ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
-       .cm2ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
-       .dt0ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
-       .dt1ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
-};
-
-void sdram_init(void)
-{
-       config_ddr(400, &ioregs, &ddr3_data,
-                  &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-       gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-       gpmc_init();
-
-       return 0;
-}
-
-#if defined(CONFIG_DRIVER_TI_CPSW)
-static void cpsw_control(int enabled)
-{
-       /* VTP can be added here */
-
-       return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-       {
-               .slave_reg_ofs  = 0x208,
-               .sliver_reg_ofs = 0xd80,
-               .phy_addr       = 0,
-               .phy_if         = PHY_INTERFACE_MODE_RMII,
-       },
-};
-
-static struct cpsw_platform_data cpsw_data = {
-       .mdio_base              = CPSW_MDIO_BASE,
-       .cpsw_base              = CPSW_BASE,
-       .mdio_div               = 0xff,
-       .channels               = 8,
-       .cpdma_reg_ofs          = 0x800,
-       .slaves                 = 1,
-       .slave_data             = cpsw_slaves,
-       .ale_reg_ofs            = 0xd00,
-       .ale_entries            = 1024,
-       .host_port_reg_ofs      = 0x108,
-       .hw_stats_reg_ofs       = 0x900,
-       .bd_ram_ofs             = 0x2000,
-       .mac_control            = (1 << 5),
-       .control                = cpsw_control,
-       .host_port_num          = 0,
-       .version                = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-       int rv, ret = 0;
-       uint8_t mac_addr[6];
-       uint32_t mac_hi, mac_lo;
-
-       if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-               /* try reading mac address from efuse */
-               mac_lo = readl(&cdev->macid0l);
-               mac_hi = readl(&cdev->macid0h);
-               mac_addr[0] = mac_hi & 0xFF;
-               mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-               mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-               mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-               mac_addr[4] = mac_lo & 0xFF;
-               mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-               if (is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("ethaddr", mac_addr);
-       }
-
-       writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
-              &cdev->miisel);
-
-       rv = cpsw_register(&cpsw_data);
-       if (rv < 0)
-               printf("Error %d registering CPSW switch\n", rv);
-       else
-               ret += rv;
-
-       return ret;
-}
-#endif
diff --git a/board/isee/igep0033/board.h b/board/isee/igep0033/board.h
deleted file mode 100644 (file)
index a11d7ab..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * IGEP COM AQUILA boards information header
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * We must be able to enable uart0, for initial output. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
diff --git a/board/isee/igep0033/mux.c b/board/isee/igep0033/mux.c
deleted file mode 100644 (file)
index e862776..0000000
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "board.h"
-
-static struct module_pin_mux uart0_pin_mux[] = {
-       {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},  /* UART0_RXD */
-       {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},              /* UART0_TXD */
-       {-1},
-};
-
-static struct module_pin_mux mmc0_pin_mux[] = {
-       {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT3 */
-       {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT2 */
-       {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT1 */
-       {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT0 */
-       {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CLK */
-       {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CMD */
-       {OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)},           /* MMC0_CD */
-       {-1},
-};
-
-static struct module_pin_mux nand_pin_mux[] = {
-       {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD0 */
-       {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD1 */
-       {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD2 */
-       {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD3 */
-       {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD4 */
-       {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD5 */
-       {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD6 */
-       {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD7 */
-       {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-       {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},   /* NAND_WPN */
-       {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},              /* NAND_CS0 */
-       {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},  /* NAND_ADV_ALE */
-       {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},   /* NAND_OE */
-       {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},       /* NAND_WEN */
-       {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},  /* NAND_BE_CLE */
-       {-1},
-};
-
-static struct module_pin_mux rmii1_pin_mux[] = {
-       {OFFSET(mii1_txen), MODE(1)},                   /* RMII1_TXEN */
-       {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},       /* RMII1_RXERR */
-       {OFFSET(mii1_crs), MODE(1) | RXACTIVE},         /* RMII1_CRS_DV */
-       {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},        /* RMII1_RXD0 */
-       {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},        /* RMII1_RXD1 */
-       {OFFSET(mii1_txd0), MODE(1)},                   /* RMII1_TXD0 */
-       {OFFSET(mii1_txd1), MODE(1)},                   /* RMII1_TXD1 */
-       {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},     /* RMII1_REF_CLK */
-       {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},    /* MDIO_DATA */
-       {OFFSET(mdio_clk), MODE(0) | PULLUP_EN},        /* MDIO_CLK */
-       {-1},
-};
-
-void enable_uart0_pin_mux(void)
-{
-       configure_module_pin_mux(uart0_pin_mux);
-}
-
-/*
- * Do board-specific muxes.
- */
-void enable_board_pin_mux(void)
-{
-       /* NAND Flash */
-       configure_module_pin_mux(nand_pin_mux);
-       /* SD Card */
-       configure_module_pin_mux(mmc0_pin_mux);
-       /* Ethernet pinmux. */
-       configure_module_pin_mux(rmii1_pin_mux);
-}
diff --git a/board/isee/igep003x/Kconfig b/board/isee/igep003x/Kconfig
new file mode 100644 (file)
index 0000000..68a68fc
--- /dev/null
@@ -0,0 +1,15 @@
+if TARGET_AM335X_IGEP003X
+
+config SYS_BOARD
+       default "igep003x"
+
+config SYS_VENDOR
+       default "isee"
+
+config SYS_SOC
+       default "am33xx"
+
+config SYS_CONFIG_NAME
+       default "am335x_igep003x"
+
+endif
diff --git a/board/isee/igep003x/MAINTAINERS b/board/isee/igep003x/MAINTAINERS
new file mode 100644 (file)
index 0000000..748b189
--- /dev/null
@@ -0,0 +1,6 @@
+IGEP003X BOARD
+M:     Enric Balletbo i Serra <eballetbo@gmail.com>
+S:     Maintained
+F:     board/isee/igep003x/
+F:     include/configs/am335x_igep003x.h
+F:     configs/am335x_igep0033_defconfig
diff --git a/board/isee/igep003x/Makefile b/board/isee/igep003x/Makefile
new file mode 100644 (file)
index 0000000..fc985b4
--- /dev/null
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y  += mux.o
+endif
+
+obj-y  += board.o
diff --git a/board/isee/igep003x/board.c b/board/isee/igep003x/board.c
new file mode 100644 (file)
index 0000000..5fea7ff
--- /dev/null
@@ -0,0 +1,174 @@
+/*
+ * Board functions for IGEP COM AQUILA based boards
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ddr_data ddr3_data = {
+       .datardsratio0 = K4B2G1646EBIH9_RD_DQS,
+       .datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
+       .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
+       .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+       .cmd0csratio = K4B2G1646EBIH9_RATIO,
+       .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+       .cmd1csratio = K4B2G1646EBIH9_RATIO,
+       .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+       .cmd2csratio = K4B2G1646EBIH9_RATIO,
+       .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+       .sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
+       .ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
+       .sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
+       .sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
+       .sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
+       .zq_config = K4B2G1646EBIH9_ZQ_CFG,
+       .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
+};
+
+#define OSC    (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {
+               400, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+       return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
+       enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+       enable_board_pin_mux();
+}
+
+const struct ctrl_ioregs ioregs = {
+       .cm0ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
+       .cm1ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
+       .cm2ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
+       .dt0ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
+       .dt1ioctl               = K4B2G1646EBIH9_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+       config_ddr(400, &ioregs, &ddr3_data,
+                  &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+       gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+       gpmc_init();
+
+       return 0;
+}
+
+#if defined(CONFIG_DRIVER_TI_CPSW)
+static void cpsw_control(int enabled)
+{
+       /* VTP can be added here */
+
+       return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+       {
+               .slave_reg_ofs  = 0x208,
+               .sliver_reg_ofs = 0xd80,
+               .phy_addr       = 0,
+               .phy_if         = PHY_INTERFACE_MODE_RMII,
+       },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+       .mdio_base              = CPSW_MDIO_BASE,
+       .cpsw_base              = CPSW_BASE,
+       .mdio_div               = 0xff,
+       .channels               = 8,
+       .cpdma_reg_ofs          = 0x800,
+       .slaves                 = 1,
+       .slave_data             = cpsw_slaves,
+       .ale_reg_ofs            = 0xd00,
+       .ale_entries            = 1024,
+       .host_port_reg_ofs      = 0x108,
+       .hw_stats_reg_ofs       = 0x900,
+       .bd_ram_ofs             = 0x2000,
+       .mac_control            = (1 << 5),
+       .control                = cpsw_control,
+       .host_port_num          = 0,
+       .version                = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+       int rv, ret = 0;
+       uint8_t mac_addr[6];
+       uint32_t mac_hi, mac_lo;
+
+       if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+               /* try reading mac address from efuse */
+               mac_lo = readl(&cdev->macid0l);
+               mac_hi = readl(&cdev->macid0h);
+               mac_addr[0] = mac_hi & 0xFF;
+               mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+               mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+               mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+               mac_addr[4] = mac_lo & 0xFF;
+               mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+               if (is_valid_ethaddr(mac_addr))
+                       eth_setenv_enetaddr("ethaddr", mac_addr);
+       }
+
+       writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
+              &cdev->miisel);
+
+       rv = cpsw_register(&cpsw_data);
+       if (rv < 0)
+               printf("Error %d registering CPSW switch\n", rv);
+       else
+               ret += rv;
+
+       return ret;
+}
+#endif
diff --git a/board/isee/igep003x/board.h b/board/isee/igep003x/board.h
new file mode 100644 (file)
index 0000000..a11d7ab
--- /dev/null
@@ -0,0 +1,19 @@
+/*
+ * IGEP COM AQUILA boards information header
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/isee/igep003x/mux.c b/board/isee/igep003x/mux.c
new file mode 100644 (file)
index 0000000..e862776
--- /dev/null
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+       {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},  /* UART0_RXD */
+       {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},              /* UART0_TXD */
+       {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+       {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT3 */
+       {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT2 */
+       {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT1 */
+       {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT0 */
+       {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CLK */
+       {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CMD */
+       {OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)},           /* MMC0_CD */
+       {-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+       {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD0 */
+       {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD1 */
+       {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD2 */
+       {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD3 */
+       {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD4 */
+       {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD5 */
+       {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD6 */
+       {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},   /* NAND AD7 */
+       {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+       {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},   /* NAND_WPN */
+       {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},              /* NAND_CS0 */
+       {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},  /* NAND_ADV_ALE */
+       {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},   /* NAND_OE */
+       {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},       /* NAND_WEN */
+       {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},  /* NAND_BE_CLE */
+       {-1},
+};
+
+static struct module_pin_mux rmii1_pin_mux[] = {
+       {OFFSET(mii1_txen), MODE(1)},                   /* RMII1_TXEN */
+       {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},       /* RMII1_RXERR */
+       {OFFSET(mii1_crs), MODE(1) | RXACTIVE},         /* RMII1_CRS_DV */
+       {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},        /* RMII1_RXD0 */
+       {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},        /* RMII1_RXD1 */
+       {OFFSET(mii1_txd0), MODE(1)},                   /* RMII1_TXD0 */
+       {OFFSET(mii1_txd1), MODE(1)},                   /* RMII1_TXD1 */
+       {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},     /* RMII1_REF_CLK */
+       {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},    /* MDIO_DATA */
+       {OFFSET(mdio_clk), MODE(0) | PULLUP_EN},        /* MDIO_CLK */
+       {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+       configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+       /* NAND Flash */
+       configure_module_pin_mux(nand_pin_mux);
+       /* SD Card */
+       configure_module_pin_mux(mmc0_pin_mux);
+       /* Ethernet pinmux. */
+       configure_module_pin_mux(rmii1_pin_mux);
+}
index 27bd3f1884b2e80b8a213a2894ce10655745d910..3b9ed4385613a7fb7c3de4e06e20a770061a5f14 100644 (file)
@@ -4,7 +4,8 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_AM33XX=y
-CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_AM335X_IGEP003X=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
@@ -13,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0033"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
@@ -45,3 +47,4 @@ CONFIG_EFI_PARTITION=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+# CONFIG_GENERATE_SMBIOS_TABLE is not set
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
deleted file mode 100644 (file)
index 7ee8ea7..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __CONFIG_IGEP0033_H
-#define __CONFIG_IGEP0033_H
-
-#define CONFIG_NAND
-#include <configs/ti_am335x_common.h>
-
-/* Mach type */
-#define CONFIG_MACH_TYPE               MACH_TYPE_IGEP0033
-
-/* Clock defines */
-#define V_OSCK                         24000000  /* Clock output from T2 */
-#define V_SCLK                         (V_OSCK)
-
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
-
-/* Make the verbose messages from UBI stop printing */
-#define CONFIG_UBI_SILENCE_MSG
-#define CONFIG_UBIFS_SILENCE_MSG
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       DEFAULT_LINUX_BOOT_ENV \
-       "bootdir=/boot\0" \
-       "bootfile=zImage\0" \
-       "dtbfile=am335x-base0033.dtb\0" \
-       "console=ttyO0,115200n8\0" \
-       "mmcdev=0\0" \
-       "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext4 rootwait\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "${optargs} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
-               "bootenv=uEnv.txt\0" \
-       "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-       "importbootenv=echo Importing environment from mmc ...; " \
-               "env import -t ${loadaddr} ${filesize}\0" \
-       "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
-               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
-       "mmcboot=mmc dev ${mmcdev}; " \
-               "if mmc rescan; then " \
-                       "echo SD/MMC found on device ${mmcdev};" \
-                       "if run loadbootenv; then " \
-                               "echo Loaded environment from ${bootenv};" \
-                               "run importbootenv;" \
-                       "fi;" \
-                       "if test -n $uenvcmd; then " \
-                               "echo Running uenvcmd ...;" \
-                               "run uenvcmd;" \
-                       "fi;" \
-                       "if run mmcload; then " \
-                               "run mmcargs; " \
-                               "bootz ${loadaddr} - ${fdtaddr};" \
-                       "fi;" \
-               "fi;\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
-       "nandrootfstype=ubifs rootwait\0" \
-       "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
-               "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
-               "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
-       "nandargs=setenv bootargs console=${console} " \
-               "${optargs} " \
-               "root=${nandroot} " \
-               "rootfstype=${nandrootfstype} \0" \
-       "nandboot=echo Booting from nand ...; " \
-               "run nandargs; " \
-               "run nandload; " \
-               "bootz ${loadaddr} - ${fdtaddr} \0"
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-       "run mmcboot;" \
-       "run nandboot;"
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
-#define CONFIG_CONS_INDEX              1
-
-/* Ethernet support */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
-
-/* NAND support */
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_SYS_NAND_ONFI_DETECTION 1
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x180000 /* environment starts here */
-#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
-
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(spl),"\
-                                       "1m(uboot),256k(environment),"\
-                                       "-(filesystem)"
-
-/* SPL */
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
-                                        10, 11, 12, 13, 14, 15, 16, 17, \
-                                        18, 19, 20, 21, 22, 23, 24, 25, \
-                                        26, 27, 28, 29, 30, 31, 32, 33, \
-                                        34, 35, 36, 37, 38, 39, 40, 41, \
-                                        42, 43, 44, 45, 46, 47, 48, 49, \
-                                        50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-
-#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-
-#endif /* ! __CONFIG_IGEP0033_H */
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
new file mode 100644 (file)
index 0000000..cf47fcf
--- /dev/null
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_IGEP003X_H
+#define __CONFIG_IGEP003X_H
+
+#define CONFIG_NAND
+#include <configs/ti_am335x_common.h>
+
+/* Clock defines */
+#define V_OSCK                         24000000  /* Clock output from T2 */
+#define V_SCLK                         (V_OSCK)
+
+#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
+
+/* Make the verbose messages from UBI stop printing */
+#define CONFIG_UBI_SILENCE_MSG
+#define CONFIG_UBIFS_SILENCE_MSG
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       "bootdir=/boot\0" \
+       "bootfile=zImage\0" \
+       "dtbfile=am335x-base0033.dtb\0" \
+       "console=ttyO0,115200n8\0" \
+       "mmcdev=0\0" \
+       "mmcroot=/dev/mmcblk0p2 rw\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "root=${mmcroot} " \
+               "rootfstype=${mmcrootfstype}\0" \
+               "bootenv=uEnv.txt\0" \
+       "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+       "importbootenv=echo Importing environment from mmc ...; " \
+               "env import -t ${loadaddr} ${filesize}\0" \
+       "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
+               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
+       "mmcboot=mmc dev ${mmcdev}; " \
+               "if mmc rescan; then " \
+                       "echo SD/MMC found on device ${mmcdev};" \
+                       "if run loadbootenv; then " \
+                               "echo Loaded environment from ${bootenv};" \
+                               "run importbootenv;" \
+                       "fi;" \
+                       "if test -n $uenvcmd; then " \
+                               "echo Running uenvcmd ...;" \
+                               "run uenvcmd;" \
+                       "fi;" \
+                       "if run mmcload; then " \
+                               "run mmcargs; " \
+                               "bootz ${loadaddr} - ${fdtaddr};" \
+                       "fi;" \
+               "fi;\0" \
+       "mtdids=" MTDIDS_DEFAULT "\0" \
+       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
+       "nandrootfstype=ubifs rootwait\0" \
+       "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
+               "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
+               "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
+       "nandargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "root=${nandroot} " \
+               "rootfstype=${nandrootfstype} \0" \
+       "nandboot=echo Booting from nand ...; " \
+               "run nandargs; " \
+               "run nandload; " \
+               "bootz ${loadaddr} - ${fdtaddr} \0"
+#endif
+
+#define CONFIG_BOOTCOMMAND \
+       "run mmcboot;" \
+       "run nandboot;"
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
+#define CONFIG_CONS_INDEX              1
+
+/* Ethernet support */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+
+/* NAND support */
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_ONFI_DETECTION 1
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              0x180000 /* environment starts here */
+#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(spl),"\
+                                       "1m(uboot),256k(environment),"\
+                                       "-(filesystem)"
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
+
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
+                                        10, 11, 12, 13, 14, 15, 16, 17, \
+                                        18, 19, 20, 21, 22, 23, 24, 25, \
+                                        26, 27, 28, 29, 30, 31, 32, 33, \
+                                        34, 35, 36, 37, 38, 39, 40, 41, \
+                                        42, 43, 44, 45, 46, 47, 48, 49, \
+                                        50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       14
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
+
+#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+
+#endif /* ! __CONFIG_IGEP003X_H */