arm: copy_loop(): use scratch register

This patch uses r1 as scratch register for copy_loop(). Therefore we do
not longer need r7 for the storage of relocate_code()'s 'addr_moni' (the
destination address of relocation).
Therefore r7 can be used later on for other purposes.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 7b59619c1790b4c587cc72350808731a57b5e806..7e3b3104e9b985a1be945f0c8799ab8f2d2cdeb0 100644 (file)
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -187,13 +187,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -202,7 +202,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -211,7 +211,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -252,7 +252,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -281,7 +281,7 @@ jump_2_ram:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index ddfefd441cd59c272e6ffea68c5b03288fec4f40..5c1899311c57aac7c1d5756b1fc9631dd7c10fff 100644 (file)
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -241,13 +241,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -256,7 +256,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -265,7 +265,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -344,7 +344,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -373,7 +373,7 @@ _nand_boot: .word nand_boot
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index da0e61e6daa559494f9d712b443359bb4d0e24bc..e3d81597daaf5d4507a4d15db56f6c92fc76df68 100644 (file)
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -156,13 +156,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -171,7 +171,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -180,7 +180,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -221,7 +221,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -245,7 +245,7 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 69a54cb91f50096090cef591fcddf1cfad39be9e..b8d20d3b767e1ab1cbcd2fc38d8da91e9dbe00e9 100644 (file)
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -202,13 +202,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -217,7 +217,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -226,7 +226,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -267,7 +267,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -298,7 +298,7 @@ _nand_boot_ofs:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index a9b5e48f8eb0e894a6a636319d51eb2a87718a4b..6d6d8f85043541d88b143b164210b7a56e392ded 100644 (file)
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -193,13 +193,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -208,7 +208,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -217,7 +217,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -258,7 +258,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -289,7 +289,7 @@ _nand_boot_ofs:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index bf4988d42a24bc7a23d17606e2f05650b8e2697a..d3f563036ec4a9b084e3862999b4b10fa1abfcb9 100644 (file)
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -192,13 +192,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -207,7 +207,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -216,7 +216,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -257,7 +257,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -288,7 +288,7 @@ _nand_boot_ofs:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 80fee310752c1e5cb28bb0b096d5d78ca581c6c3..e3a84a1367885ceec2aff42c557155b13ea6b2a0 100644 (file)
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -164,13 +164,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -179,7 +179,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -188,7 +188,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -229,7 +229,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -255,7 +255,7 @@ _nand_boot: .word nand_boot
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 0e8a21b3d9f2c02b1bc17da75f78487c5b605d2c..752c2a5d1b20fb225383a9453e0b45d0886d346d 100644 (file)
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -160,13 +160,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -175,7 +175,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -184,7 +184,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -225,7 +225,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -256,7 +256,7 @@ _nand_boot_ofs:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index de9d1e2f364bf463cdb46d6977cb1d55d5bdf22a..fe982352f51e4b2f25ffc1c389c76d7e1a836bfb 100644 (file)
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -160,7 +160,6 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
@@ -170,6 +169,7 @@ stack_setup:
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        cmp     r0, r6
 #ifndef CONFIG_PRELOADER
        beq     jump_2_ram
@@ -177,7 +177,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -186,7 +186,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -225,7 +225,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -247,7 +247,7 @@ jump_2_ram:
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 75ee6775e283fe1c72ceb9c10cc452c081c580f7..61264008d3c423348f4bf6bb975b21673c17de44 100644 (file)
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -286,13 +286,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -301,7 +301,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -310,7 +310,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -351,7 +351,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -375,7 +375,7 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 2fa36141940ebc20dc996292b67ef7683f9669ea..e9af2631cdc135f5f2a459d3fed4dcd55e68201f 100644 (file)
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -173,13 +173,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -188,7 +188,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -197,7 +197,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -238,7 +238,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -259,7 +259,7 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 66479cb9574d3bfffd136b77a41feff618f8d956..7e1c6e62aa5e907a87d110241350f9c38adb6a41 100644 (file)
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -238,13 +238,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -254,7 +254,7 @@ stack_setup:
        stmfd sp!, {r0-r12}
 copy_loop:
        ldmia   r0!, {r3-r5, r7-r11}    /* copy from source address [r0]    */
-       stmia   r6!, {r3-r5, r7-r11}    /* copy to   target address [r1]    */
+       stmia   r1!, {r3-r5, r7-r11}    /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
        ldmfd sp!, {r0-r12}
@@ -264,7 +264,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -305,7 +305,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -333,7 +333,7 @@ _start_oneboot_ofs
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 5559431551dea5ca74e6b4f804c4470107e5026f..89e42b193702bd2f012420002719367e6ddefc04 100644 (file)
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -145,13 +145,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -160,7 +160,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -169,7 +169,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -210,7 +210,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -234,7 +234,7 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr
 

diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 4fb0b8b415c9db9cfa4987931320bb511b742917..a7696879830a498e87bd24929aff8b829c32c2ed 100644 (file)
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -149,13 +149,13 @@ relocate_code:
        mov     r4, r0  /* save addr_sp */
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
-       mov     r7, r2  /* save addr of destination */
 
        /* Set up the stack                                                 */
 stack_setup:
        mov     sp, r4
 
        adr     r0, _start
+       mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -164,7 +164,7 @@ stack_setup:
 
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
-       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       stmia   r1!, {r9-r10}           /* copy to   target address [r1]    */
        cmp     r0, r2                  /* until source end address [r2]    */
        blo     copy_loop
 
@@ -173,7 +173,7 @@ copy_loop:
         * fix .rel.dyn relocations
         */
        ldr     r0, _TEXT_BASE          /* r0 <- Text base */
-       sub     r9, r7, r0              /* r9 <- relocation offset */
+       sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
        ldr     r2, _rel_dyn_start_ofs  /* r2 <- rel dyn start ofs */
@@ -214,7 +214,7 @@ clear_bss:
        ldr     r0, _bss_start_ofs
        ldr     r1, _bss_end_ofs
        ldr     r3, _TEXT_BASE          /* Text base */
-       mov     r4, r7                  /* reloc addr */
+       mov     r4, r6                  /* reloc addr */
        add     r0, r0, r4
        add     r1, r1, r4
        mov     r2, #0x00000000         /* clear                            */
@@ -235,7 +235,7 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        add     lr, lr, r9
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
-       mov     r1, r7          /* dest_addr */
+       mov     r1, r6          /* dest_addr */
        /* jump to it ... */
        mov     pc, lr