include: configs: Enable DWC3 and DFU in AM43xx

Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled
support for DFU.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 7ccbf36b0b3b3bae2b2da96e43dc6016fb8399d3..6eb31e21201cafe01aaba3f5d02a09088065181f 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -109,6 +109,61 @@
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
 
+/* USB GADGET */
+#if !defined(CONFIG_SPL_BUILD) || \
+       (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT))
+#define CONFIG_USB_DWC3_PHY_OMAP
+#define CONFIG_USB_DWC3_OMAP
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_USB_GADGET_DUALSPEED
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+/* USB Device Firmware Update support */
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_RAM
+#define CONFIG_CMD_DFU
+
+#define CONFIG_DFU_MMC
+#define DFU_ALT_INFO_MMC \
+       "dfu_alt_info_mmc=" \
+       "boot part 0 1;" \
+       "rootfs part 0 2;" \
+       "MLO fat 0 1;" \
+       "spl-os-args fat 0 1;" \
+       "spl-os-image fat 0 1;" \
+       "u-boot.img fat 0 1;" \
+       "uEnv.txt fat 0 1\0"
+
+#define DFU_ALT_INFO_EMMC \
+       "dfu_alt_info_emmc=" \
+       "MLO raw 0x100 0x100 mmcpart 0;" \
+       "u-boot.img raw 0x300 0x1000 mmcpart 0\0"
+
+#define CONFIG_DFU_RAM
+#define DFU_ALT_INFO_RAM \
+       "dfu_alt_info_ram=" \
+       "kernel ram 0x80200000 0x4000000;" \
+       "fdt ram 0x80f80000 0x80000;" \
+       "ramdisk ram 0x81000000 0x4000000\0"
+
+#define DFUARGS \
+       "dfu_bufsiz=0x10000\0" \
+       DFU_ALT_INFO_MMC \
+       DFU_ALT_INFO_EMMC \
+       DFU_ALT_INFO_RAM
+#else
+#define DFUARGS
+#endif
+
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE           0x30000000
 #undef CONFIG_ENV_IS_IN_FAT
@@ -239,7 +294,8 @@
                "if test $board_name = AM43_IDK; then " \
                        "setenv fdtfile am437x-idk-evm.dtb; fi; " \
                "if test $fdtfile = undefined; then " \
-                       "echo WARNING: Could not determine device tree; fi; \0"
+                       "echo WARNING: Could not determine device tree; fi; \0" \
+       DFUARGS \
 
 #define CONFIG_BOOTCOMMAND \
        "run findfdt; " \