sunxi: ga10h: Enable both otg and regular usb host controllers
authorHans de Goede <hdegoede@redhat.com>
Wed, 17 Jun 2015 19:16:59 +0000 (21:16 +0200)
committerHans de Goede <hdegoede@redhat.com>
Sat, 25 Jul 2015 09:22:55 +0000 (11:22 +0200)
This allows using devices plugged into both ports of the tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
arch/arm/dts/sun8i-a23-a33.dtsi
arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
configs/ga10h_v1_1_defconfig

index 7abd0ae3143d74e1f9ba9b2638fc55353a306d7c..5cd2e92c1940ad1c0807d25d3adfb0c00ebf9af4 100644 (file)
                        #size-cells = <0>;
                };
 
+               ehci0: usb@01c1a000 {
+                       compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+                       reg = <0x01c1a000 0x100>;
+                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ahb1_gates 26>;
+                       resets = <&ahb1_rst 26>;
+                       status = "disabled";
+               };
+
+               ohci0: usb@01c1a400 {
+                       compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+                       reg = <0x01c1a400 0x100>;
+                       interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+                       resets = <&ahb1_rst 29>;
+                       status = "disabled";
+               };
+
                pio: pinctrl@01c20800 {
                        /* compatible gets set in SoC specific dtsi file */
                        reg = <0x01c20800 0x400>;
index 866703355b9c901cb2a2b3aaffe8dd764840d87a..da16343346407a6b8e9112527a5f12744be19dc8 100644 (file)
        };
 };
 
+&ehci0 {
+       status = "okay";
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
 &pio {
        mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
                allwinner,pins = "PB4";
index 3d75ecd1d3f932efe576d9fe54919dc635ce45b4..e766db4f6fd673913ab9cbc10b798137e147bda4 100644 (file)
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291
 CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -23,3 +24,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_EHCI_HCD=y