${LIST_86xx} \
"
-LIST_ppc=" \
+LIST_powerpc=" \
${LIST_5xx} \
${LIST_512x} \
${LIST_5xxx} \
${LIST_7xx} \
"
+# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
+# still using "ppc" instead of "powerpc"
+LIST_ppc=" \
+ ${LIST_powerpc} \
+"
+
#########################################################################
## StrongARM Systems
#########################################################################
#-----------------------------------------------------------------------
-#----- for now, just run PPC by default -----
-[ $# = 0 ] && set $LIST_ppc
+#----- for now, just run PowerPC by default -----
+[ $# = 0 ] && set $LIST_powerpc
#-----------------------------------------------------------------------
|microblaze \
|mips|mips_el \
|nios|nios2 \
- |ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
+ |ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
|sh|sh2|sh3|sh4 \
|sparc \
|x86|I486 \
#########################################################################
-ifeq ($(ARCH),powerpc)
-ARCH = ppc
-endif
-
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc86xx)
-LIBS += arch/ppc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/ppc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
#########################################################################
canmb_config: unconfig
- @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
+ @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi
PATI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
- @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc
BC3450_config: unconfig
- @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
+ @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450
cm5200_config: unconfig
- @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
+ @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200
cpci5200_config: unconfig
- @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
+ @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd
digsy_mtc_config \
digsy_mtc_LOWBOOT_config \
{ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
echo "... with RAMBOOT configuration" ; \
}
- @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+ @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
galaxy5200_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
+ @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200
hmi1001_config: unconfig
- @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
+ @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
jupiter_config: unconfig
- @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
+ @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
inka4x0_config: unconfig
- @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
+ @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0
ipek01_config: unconfig
- @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
+ @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01
lite5200b_config \
lite5200b_PM_config \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
- @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
@[ -z "$(findstring prs200,$@)" ] || \
{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
}
- @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
+ @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
mecp5200_config: unconfig
- @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
+ @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd
motionpro_config: unconfig
- @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
+ @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro
mucmc52_config: unconfig
- @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
+ @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52
munices_config: unconfig
- @$(MKCONFIG) munices ppc mpc5xxx munices
+ @$(MKCONFIG) munices powerpc mpc5xxx munices
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
- @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
+ @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision
MVSMR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/matrix_vision/mvsmr
- @$(MKCONFIG) $(@:_config=) ppc mpc5xxx mvsmr matrix_vision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision
o2dnt_config: unconfig
- @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
+ @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt
pcm030_config \
pcm030_LOWBOOT_config: unconfig
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
- @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
+ @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec
pf5200_config: unconfig
- @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
+ @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
$(XECHO) "... booting from 8-bit flash" ; \
}
- @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
+ @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520
smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
spieval_config: unconfig
- @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc
TB5200_B_config \
TB5200_config: unconfig
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
- @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
+ @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
Total5200_config \
Total5200_lowboot_config \
{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
- @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
+ @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
+ @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
uc101_config: unconfig
- @$(MKCONFIG) uc101 ppc mpc5xxx uc101
+ @$(MKCONFIG) uc101 powerpc mpc5xxx uc101
v38b_config: unconfig
- @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
+ @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b
#########################################################################
## MPC512x Systems
#########################################################################
aria_config: unconfig
- @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
+ @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx
mecp5123_config: unconfig
- @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
+ @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd
mpc5121ads_config \
mpc5121ads_rev2_config \
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
+ @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
- @$(MKCONFIG) -a Adder ppc mpc8xx adder
+ @$(MKCONFIG) -a Adder powerpc mpc8xx adder
AdderUSB_config: unconfig
- @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
+ @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder
ADS860_config \
FADS823_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads
AMX860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
c2mon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon
CCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent
ELPT860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX
EP88x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x
ESTEEM192E_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e
ETX094_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094
FLAGADM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
$(XECHO) "With reduced H/W feature set (SC)..." ; \
}
- @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
+ @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
GENIETV_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
GTH_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth
hermes_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes
HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
IAD210_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
- @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
+ @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
IP860_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm
kmsupx4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
KUP4K_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup
KUP4X_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup
LANTEC_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec
lwmon_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
MHPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
$(XECHO) "... Version 2" ; \
}
- @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
+ @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+ @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+ @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+ @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
@[ -z "$(findstring Rev2,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
- @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
+ @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650
NX823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
pcu_e_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens
QS850_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
QS823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
QS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc
quantum_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum
R360MPI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi
RBC823_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823
RPXClassic_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic
RPXlite_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
{ echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with ENV in NVRAM ..."; \
}
- @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
+ @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw
rmu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
RRvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
+ @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
spc1920_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920
SPD823TS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx
stxxtc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx
svm_sc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
uc100_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
acadia_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
+ @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
ADCIOP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd
alpr_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive
AP1000_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix
APC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd
AR405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd
ASH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd
bamboo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
bubinga_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc
CANBT_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd
# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
canyonlands_nand_config \
glacier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
CMS700_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
CPCI2DP_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd
CPCIISER4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray
csb272_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272
csb472_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472
DASA_SIM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd
dlvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys
DP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd
DU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd
DU440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd
ebony_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc
ERIC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric
fx12mm_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0xFFCB0000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
fx12mm_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/avnet/fx12mm/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/fx12mm/config.tmp
- @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+ @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
G2000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000
gdppc440etx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys
hcu4_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal
hcu5_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal
HH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd
HUB405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd
# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
+ @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
JSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse
KAREF_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst
katmai_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
korat_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
luan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc
lwmon5_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5
makalu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc
mcu25_config: unconfig
@mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal
METROBOX_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst
MIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
- @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
ML2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+ @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+ @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
neo_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys
ocotea_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd
p3p440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
PCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd
pcs440ep_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep
PIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl
PLU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd
PMC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd
PMC405DE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd
PMC440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
- @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
quad100hd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
redwood_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc
sbc405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405
sc3_config:unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
taihu_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
taishan_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0xFF1C0000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
VOH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd
VOM405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd
W7OLMC_config \
W7OLMG_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
- @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
+ @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc
WUH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd
xilinx-ppc405-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc405-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
> $(obj)board/xilinx/ppc405-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+ @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
xilinx-ppc440-generic_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/xilinx/ppc440-generic/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
- @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+ @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
XPEDITE1000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
+ @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
yucca_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc
zeus_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+ @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus
#########################################################################
## MPC8220 Systems
Alaska8220_config \
Yukon8220_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska
sorcery_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
#########################################################################
## MPC824x Systems
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000
barco_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco
BMW_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
debris_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin
eXalion_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon
kvme080_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac
- @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
+ @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
MOUSSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse
MUSENKI_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki
MVBLUE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue
OXC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc
PN62_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62
Sandpoint8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
sbc8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240
utx8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc
cogent_mpc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
ep8248_config \
ep8248E_config : unconfig
- @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
+ @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248
ep8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
ep82xxm_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm
gw8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260
hymod_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod
IDS8247_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247
IPHASE4539_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
+ @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan
mgcoge_config : unconfig
- @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
+ @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
- @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
+ @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
MPC8266ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
+ @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
+ @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826
PM828_config \
PM828_PCI_config \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
+ @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828
ppmc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
- @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
+ @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler
RPXsuper_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
rsdproto_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto
sacsng_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng
sbc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260
SCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
+ @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc
TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
+ @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
- @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+ @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
+ @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
kmeter1_config: unconfig
- @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+ @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+ @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
@if [ "$(findstring _NAND_,$@)" ] ; then \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+ @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
+ @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
- @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
+ @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+ @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
$(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
- @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
+ @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+ @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
MPC837XERDB_config: unconfig
- @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+ @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
MVBLM7_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
$(XECHO) -n "...Small Page NAND..." ; \
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
+ @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+ @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc
caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
+ @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
edb9301_config \
edb9302_config \
#########################################################################
ATUM8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548
MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
else \
$(XECHO) " host" ; \
fi
- @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
+ @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
+ @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
+ @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
+ @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
+ @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
P1011RDB_config \
P1011RDB_NAND_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
+ @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
PM854_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
PM856_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
+ @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
socrates_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
stxgp3_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx
stxssa_config \
stxssa_4M_config: unconfig
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
fi
- @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
+ @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
- @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+ @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
XPEDITE5200_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
XPEDITE5370_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes
#########################################################################
## MPC86xx Systems
#########################################################################
MPC8610HPCD_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale
MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
$(XECHO) "... enabling 36-bit physical addressing." ; \
fi
- @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
+ @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
sbc8641d_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
XPEDITE5170_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
+ @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
- @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
+ @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd
DB64360_config: unconfig
- @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
+ @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
- @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
+ @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
- @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
+ @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260
mpc7448hpc2_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
P3G4_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
+ @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2
ppmc7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
ZUMA_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
#========================================================================
# ARM
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
- @rm -f $(obj)arch/ppc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/lib Architecture specific library files
- /ppc Files generic to PowerPC architecture
+ /powerpc Files generic to PowerPC architecture
/cpu CPU specific files
/74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/mpc5xx Files specific to Freescale MPC5xx CPUs
the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx
- (arch/ppc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
+ (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
and so its address should therefore be cleared to 0 (See,
eg, MPC823e User's Manual p.16-473). So, set
CONFIG_SYS_I2C_SLAVE to 0.
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
- -30 arch/ppc/lib/board.c Fatal error, hang the system
+ -30 arch/powerpc/lib/board.c Fatal error, hang the system
-31 post/post.c POST test failed, detected by post_output_backlog()
-32 post/post.c POST test failed, detected by post_run_single()
CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
- Overrides the default PCI memory map in arch/ppc/cpu/mpc8260/pci.c if set.
+ Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set.
- CONFIG_PCI_DISABLE_PCIE:
Disable PCI-Express on systems where it is supported but not
(no, we don't intend to provide a full virtual machine interface to
Linux :-).
-But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).
+But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot).
Just make sure your machine specific header file (for instance
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
- > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \
+ > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \
> examples/uImage.TQM850L
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
needs more space in Flash, but boots much faster since it does not
need to be uncompressed:
- -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz
+ -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
- > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \
+ > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \
> examples/uImage.TQM850L-uncompressed
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
--- /dev/null
+/*
+ * (C) Copyright 2007 Semihalf
+ *
+ * Written by: Rafal Jaworowski <raj@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * This file contains routines that fetch data from PowerPC-dependent sources
+ * (bd_info etc.)
+ *
+ */
+
+#include <config.h>
+#include <linux/types.h>
+#include <api_public.h>
+
+#include <asm/u-boot.h>
+#include <asm/global_data.h>
+
+#include "api_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Important notice: handling of individual fields MUST be kept in sync with
+ * include/asm-ppc/u-boot.h and include/asm-ppc/global_data.h, so any changes
+ * need to reflect their current state and layout of structures involved!
+ */
+int platform_sys_info(struct sys_info *si)
+{
+ si->clk_bus = gd->bus_clk;
+ si->clk_cpu = gd->cpu_clk;
+
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) || \
+ defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#define bi_bar bi_immr_base
+#elif defined(CONFIG_MPC5xxx)
+#define bi_bar bi_mbar_base
+#elif defined(CONFIG_MPC83xx)
+#define bi_bar bi_immrbar
+#elif defined(CONFIG_MPC8220)
+#define bi_bar bi_mbar_base
+#endif
+
+#if defined(bi_bar)
+ si->bar = gd->bd->bi_bar;
+#undef bi_bar
+#else
+ si->bar = 0;
+#endif
+
+ platform_set_mr(si, gd->bd->bi_memstart, gd->bd->bi_memsize, MR_ATTR_DRAM);
+ platform_set_mr(si, gd->bd->bi_flashstart, gd->bd->bi_flashsize, MR_ATTR_FLASH);
+ platform_set_mr(si, gd->bd->bi_sramstart, gd->bd->bi_sramsize, MR_ATTR_SRAM);
+
+ return 1;
+}
+++ /dev/null
-/*
- * (C) Copyright 2007 Semihalf
- *
- * Written by: Rafal Jaworowski <raj@semihalf.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * This file contains routines that fetch data from PowerPC-dependent sources
- * (bd_info etc.)
- *
- */
-
-#include <config.h>
-#include <linux/types.h>
-#include <api_public.h>
-
-#include <asm/u-boot.h>
-#include <asm/global_data.h>
-
-#include "api_private.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Important notice: handling of individual fields MUST be kept in sync with
- * include/asm-ppc/u-boot.h and include/asm-ppc/global_data.h, so any changes
- * need to reflect their current state and layout of structures involved!
- */
-int platform_sys_info(struct sys_info *si)
-{
- si->clk_bus = gd->bus_clk;
- si->clk_cpu = gd->cpu_clk;
-
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) || \
- defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-#define bi_bar bi_immr_base
-#elif defined(CONFIG_MPC5xxx)
-#define bi_bar bi_mbar_base
-#elif defined(CONFIG_MPC83xx)
-#define bi_bar bi_immrbar
-#elif defined(CONFIG_MPC8220)
-#define bi_bar bi_mbar_base
-#endif
-
-#if defined(bi_bar)
- si->bar = gd->bd->bi_bar;
-#undef bi_bar
-#else
- si->bar = 0;
-#endif
-
- platform_set_mr(si, gd->bd->bi_memstart, gd->bd->bi_memsize, MR_ATTR_DRAM);
- platform_set_mr(si, gd->bd->bi_flashstart, gd->bd->bi_flashsize, MR_ATTR_FLASH);
- platform_set_mr(si, gd->bd->bi_sramstart, gd->bd->bi_sramsize, MR_ATTR_SRAM);
-
- return 1;
-}
--- /dev/null
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CROSS_COMPILE ?= ppc_8xx-
+
+STANDALONE_LOAD_ADDR = 0x40000
+
+PLATFORM_RELFLAGS += -mrelocatable
+PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
+PLATFORM_LDFLAGS += -n
+
+#
+# When cross-compiling on NetBSD, we have to define __PPC__ or else we
+# will pick up a va_list declaration that is incompatible with the
+# actual argument lists emitted by the compiler.
+#
+# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
+
+ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
+PLATFORM_CPPFLAGS+= -D__PPC__
+endif
+ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
+PLATFORM_CPPFLAGS+= -D__PPC__
+endif
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+SOBJS = cache.o kgdb.o io.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#include <config.h>
+#include <74xx_7xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+ mfspr r3,PVR
+ rlwinm r3,r3,16,16,31
+ cmpi 0,r3,1
+ beqlr /* for 601, do nothing */
+ /* 603/604 processor - use invalidate-all bit in HID0 */
+ mfspr r3,HID0
+ ori r3,r3,HID0_ICFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+ mfspr r3,HID0
+ ori r3,r3,HID0_DCFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_dcache)
+ lis r3,0
+ lis r5,CACHE_LINE_SIZE
+flush:
+ cmp 0,1,r3,r5
+ bge done
+ lwz r5,0(r3)
+ lis r5,CACHE_LINE_SIZE
+ addi r3,r3,0x4
+ b flush
+done:
+ blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+ mfspr r5,PVR
+ rlwinm r5,r5,16,16,31
+ cmpi 0,r5,1
+ beqlr /* for 601, do nothing */
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 2b
+ sync /* additional sync needed on g4 */
+ isync
+ blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5 /* align r3 down to cache line */
+ subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
+ add r4,r4,r5 /* r4 += cache_line_size-1 */
+ srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
+ beqlr /* if r4 == 0 return */
+ mtctr r4 /* ctr = r4 */
+
+ sync
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbf 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbf's to get to ram */
+ blr
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbi's to get to ram */
+ blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ * void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+ mfspr r5,PVR
+ rlwinm r5,r5,16,16,31
+ cmpi 0,r5,1
+ beqlr /* for 601, do nothing */
+ rlwinm r3,r3,0,0,19 /* Get page base address */
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+ mr r6,r3
+0: dcbst 0,r3 /* Write line to ram */
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 0b
+ sync
+ mtctr r4
+1: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ * void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+ mfspr r5,PVR
+ rlwinm r5,r5,16,16,31
+ cmpi 0,r5,1
+ beqlr /* for 601, do nothing */
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+1: icbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced). This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+ li r0,4096/CACHE_LINE_SIZE
+ mtctr r0
+1: dcbz 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+ mfspr r3, HID0
+ li r5, HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r5
+ ori r3, r3, HID0_ICE
+ ori r5, r3, HID0_ICFI
+ mtspr HID0, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+ mflr r4
+ bl invalidate_l1_instruction_cache /* uses r3 */
+ sync
+ mtlr r4
+ mfspr r3, HID0
+ li r5, 0
+ ori r5, r5, HID0_ICE
+ andc r3, r3, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_ICE
+ blr
+
+
+_GLOBAL(l1dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+ blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+#ifdef CONFIG_SYS_L2
+ mflr r5
+ bl l2cache_enable /* uses r3 and r4 */
+ sync
+ mtlr r5
+#endif
+ blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_dcache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+ mflr r4 /* save link register */
+ bl flush_dcache /* uses r3 and r5 */
+ sync
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ li r5, HID0_DCE|HID0_DCFI
+ andc r3, r3, r5 /* no enable, no invalidate */
+ mtspr HID0, r3
+ sync
+#ifdef CONFIG_SYS_L2
+ bl l2cache_disable_no_flush /* uses r3 */
+#endif
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_DCE
+ blr
+
+/*
+ * Invalidate L2 cache using L2I and polling L2IP or L2I
+ */
+_GLOBAL(l2cache_invalidate)
+ sync
+ mfspr r3, l2cr
+ oris r3, r3, L2CR_L2I@h
+ sync
+ mtspr l2cr, r3
+ sync
+ mfspr r3, PVR
+ sync
+ rlwinm r3, r3, 16,16,31
+ cmpli 0,r3,0x8000 /* 7451, 7441 */
+ beq 0,inv_7450
+ cmpli 0,r3,0x8001 /* 7455, 7445 */
+ beq 0,inv_7450
+ cmpli 0,r3,0x8002 /* 7457, 7447 */
+ beq 0,inv_7450
+ cmpli 0,r3,0x8003 /* 7447A */
+ beq 0,inv_7450
+ cmpli 0,r3,0x8004 /* 7448 */
+ beq 0,inv_7450
+invl2:
+ mfspr r3, l2cr
+ andi. r3, r3, L2CR_L2IP
+ bne invl2
+ /* turn off the global invalidate bit */
+ mfspr r3, l2cr
+ rlwinm r3, r3, 0, 11, 9
+ sync
+ mtspr l2cr, r3
+ sync
+ blr
+inv_7450:
+ mfspr r3, l2cr
+ andis. r3, r3, L2CR_L2I@h
+ bne inv_7450
+ blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+ mflr r4 /* save link register */
+ bl l2cache_invalidate /* uses r3 */
+ sync
+ lis r3, L2_ENABLE@h
+ ori r3, r3, L2_ENABLE@l
+ mtspr l2cr, r3
+ isync
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_dcache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+ mflr r4 /* save link register */
+ bl flush_dcache /* uses r3 and r5 */
+ sync
+ mtlr r4 /* restore link register */
+l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
+ lis r3, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ mtspr l2cr, r3
+ isync
+ blr
--- /dev/null
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -mstring
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * cpu.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ *
+ * more modifications by
+ * Josh Huber <huber@mclx.com>
+ * added support for the 74xx series of cpus
+ * added support for the 7xx series of cpus
+ * made the code a little less hard-coded, and more auto-detectish
+ */
+
+#include <common.h>
+#include <command.h>
+#include <74xx_7xx.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+#ifdef CONFIG_AMIGAONEG3SE
+#include "../board/MAI/AmigaOneG3SE/via686.h"
+#include "../board/MAI/AmigaOneG3SE/memio.h"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+cpu_t
+get_cpu_type(void)
+{
+ uint pvr = get_pvr();
+ cpu_t type;
+
+ type = CPU_UNKNOWN;
+
+ switch (PVR_VER(pvr)) {
+ case 0x000c:
+ type = CPU_7400;
+ break;
+ case 0x0008:
+ type = CPU_750;
+
+ if (((pvr >> 8) & 0xff) == 0x01) {
+ type = CPU_750CX; /* old CX (80100 and 8010x?)*/
+ } else if (((pvr >> 8) & 0xff) == 0x22) {
+ type = CPU_750CX; /* CX (82201,82202) and CXe (82214) */
+ } else if (((pvr >> 8) & 0xff) == 0x33) {
+ type = CPU_750CX; /* CXe (83311) */
+ } else if (((pvr >> 12) & 0xF) == 0x3) {
+ type = CPU_755;
+ }
+ break;
+
+ case 0x7000:
+ type = CPU_750FX;
+ break;
+
+ case 0x7002:
+ type = CPU_750GX;
+ break;
+
+ case 0x800C:
+ type = CPU_7410;
+ break;
+
+ case 0x8000:
+ type = CPU_7450;
+ break;
+
+ case 0x8001:
+ type = CPU_7455;
+ break;
+
+ case 0x8002:
+ type = CPU_7457;
+ break;
+
+ case 0x8003:
+ type = CPU_7447A;
+ break;
+
+ case 0x8004:
+ type = CPU_7448;
+ break;
+
+ default:
+ break;
+ }
+
+ return type;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if !defined(CONFIG_BAB7xx)
+int checkcpu (void)
+{
+ uint type = get_cpu_type();
+ uint pvr = get_pvr();
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+ char *str;
+
+ puts ("CPU: ");
+
+ switch (type) {
+ case CPU_750CX:
+ printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"",
+ (pvr>>8) & 0xf,
+ pvr & 0xf);
+ goto PR_CLK;
+
+ case CPU_750:
+ str = "750";
+ break;
+
+ case CPU_750FX:
+ str = "750FX";
+ break;
+
+ case CPU_750GX:
+ str = "750GX";
+ break;
+
+ case CPU_755:
+ str = "755";
+ break;
+
+ case CPU_7400:
+ str = "MPC7400";
+ break;
+
+ case CPU_7410:
+ str = "MPC7410";
+ break;
+
+ case CPU_7447A:
+ str = "MPC7447A";
+ break;
+
+ case CPU_7448:
+ str = "MPC7448";
+ break;
+
+ case CPU_7450:
+ str = "MPC7450";
+ break;
+
+ case CPU_7455:
+ str = "MPC7455";
+ break;
+
+ case CPU_7457:
+ str = "MPC7457";
+ break;
+
+ default:
+ printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
+ return -1;
+ }
+
+ printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF);
+PR_CLK:
+ printf (" @ %s MHz\n", strmhz(buf, clock));
+
+ return (0);
+}
+#endif
+/* these two functions are unimplemented currently [josh] */
+
+/* -------------------------------------------------------------------- */
+/* L1 i-cache */
+
+int
+checkicache(void)
+{
+ return 0; /* XXX */
+}
+
+/* -------------------------------------------------------------------- */
+/* L1 d-cache */
+
+int
+checkdcache(void)
+{
+ return 0; /* XXX */
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void
+soft_restart(unsigned long addr)
+{
+ /* SRR0 has system reset vector, SRR1 has default MSR value */
+ /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
+
+ __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
+ __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
+ __asm__ __volatile__ ("mtspr 27, 4");
+ __asm__ __volatile__ ("rfi");
+
+ while(1); /* not reached */
+}
+
+
+#if !defined(CONFIG_PCIPPC2) && \
+ !defined(CONFIG_BAB7xx) && \
+ !defined(CONFIG_ELPPC) && \
+ !defined(CONFIG_PPMC7XX)
+/* no generic way to do board reset. simply call soft_reset. */
+void
+do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr;
+ /* flush and disable I/D cache */
+ __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
+ __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
+ __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
+ __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("mtspr 1008, 4");
+ __asm__ __volatile__ ("isync");
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("mtspr 1008, 5");
+ __asm__ __volatile__ ("isync");
+ __asm__ __volatile__ ("sync");
+
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+ * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
+ * address. Better pick an address known to be invalid on your
+ * system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ soft_restart(addr);
+ while(1); /* not reached */
+}
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
+ */
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
+unsigned long get_tbclk(void)
+{
+ return (gd->bus_clk / 4);
+}
+#else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
+
+unsigned long get_tbclk (void)
+{
+ return CONFIG_SYS_BUS_HZ / 4;
+}
+#endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
+/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_WATCHDOG)
+#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
+void
+watchdog_reset(void)
+{
+
+}
+#endif /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_LIBFDT
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ fdt_fixup_ethernet(blob);
+}
+#endif
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * cpu_init.c - low level cpu init
+ *
+ * there's really nothing going on here yet. future work area?
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * there's basically nothing to do here since the memory controller
+ * isn't on the CPU in this case.
+ */
+void
+cpu_init_f (void)
+{
+ switch (get_cpu_type()) {
+ case CPU_7450:
+ case CPU_7455:
+ case CPU_7457:
+ case CPU_7447A:
+ case CPU_7448:
+ /* enable the timebase bit in HID0 */
+ set_hid0(get_hid0() | 0x4000000);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * interrupts.c - just enough support for the decrementer/timer
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <mpc8xx_irq.h>
+#include <asm/processor.h>
+#include <commproc.h>
+#include <command.h>
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+#if defined(DEBUG) && !defined(CONFIG_AMIGAONEG3SE)
+ printf("interrupt_init: GT main cause reg: %08x:%08x\n",
+ GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
+ GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
+ printf("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
+ GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
+ GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
+ GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
+ printf("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
+ GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
+ GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
+ GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
+ puts("interrupt_init: setting decrementer_count\n");
+#endif
+ *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void
+external_interrupt(struct pt_regs *regs)
+{
+ puts("external_interrupt (oops!)\n");
+}
+
+volatile ulong timestamp = 0;
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void
+timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void
+irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+
+}
+
+void
+irq_free_handler(int vec)
+{
+
+}
+
+/****************************************************************************/
+
+void
+do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+ puts("IRQ related functions are unimplemented currently.\n");
+}
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0(3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,0,r3
+ sync
+ blr
--- /dev/null
+/*
+ * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <74xx_7xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+
+ /*
+ * cache flushing routines for kgdb
+ */
+
+ .globl kgdb_flush_cache_all
+kgdb_flush_cache_all:
+ lis r3,0
+ addis r4,r0,0x0040
+kgdb_flush_loop:
+ lwz r5,0(r3)
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ cmp 0,0,r3,r4
+ bne kgdb_flush_loop
+ SYNC
+ mfspr r3,1008
+ ori r3,r3,0x8800
+ mtspr 1008,r3
+ sync
+ blr
+
+ .globl kgdb_flush_cache_range
+kgdb_flush_cache_range:
+ li r5,CONFIG_SYS_CACHELINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 2b
+ SYNC
+ blr
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_AMIGAONEG3SE
+#include "../board/MAI/AmigaOneG3SE/via686.h"
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern unsigned long get_board_bus_clk (void);
+
+static const int hid1_multipliers_x_10[] = {
+ 25, /* 0000 - 2.5x */
+ 75, /* 0001 - 7.5x */
+ 70, /* 0010 - 7x */
+ 10, /* 0011 - bypass */
+ 20, /* 0100 - 2x */
+ 65, /* 0101 - 6.5x */
+ 100, /* 0110 - 10x */
+ 45, /* 0111 - 4.5x */
+ 30, /* 1000 - 3x */
+ 55, /* 1001 - 5.5x */
+ 40, /* 1010 - 4x */
+ 50, /* 1011 - 5x */
+ 80, /* 1100 - 8x */
+ 60, /* 1101 - 6x */
+ 35, /* 1110 - 3.5x */
+ 0 /* 1111 - off */
+};
+
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+ 115, /* 00000 - 11.5x */
+ 170, /* 00001 - 17x */
+ 75, /* 00010 - 7.5x */
+ 150, /* 00011 - 15x */
+ 70, /* 00100 - 7x */
+ 180, /* 00101 - 18x */
+ 10, /* 00110 - bypass */
+ 200, /* 00111 - 20x */
+ 20, /* 01000 - 2x */
+ 210, /* 01001 - 21x */
+ 65, /* 01010 - 6.5x */
+ 130, /* 01011 - 13x */
+ 85, /* 01100 - 8.5x */
+ 240, /* 01101 - 24x */
+ 95, /* 01110 - 9.5x */
+ 90, /* 01111 - 9x */
+ 30, /* 10000 - 3x */
+ 105, /* 10001 - 10.5x */
+ 55, /* 10010 - 5.5x */
+ 110, /* 10011 - 11x */
+ 40, /* 10100 - 4x */
+ 100, /* 10101 - 10x */
+ 50, /* 10110 - 5x */
+ 120, /* 10111 - 12x */
+ 80, /* 11000 - 8x */
+ 140, /* 11001 - 14x */
+ 60, /* 11010 - 6x */
+ 160, /* 11011 - 16x */
+ 135, /* 11100 - 13.5x */
+ 280, /* 11101 - 28x */
+ 0, /* 11110 - off */
+ 125 /* 11111 - 12.5x */
+};
+
+static const int hid1_fx_multipliers_x_10[] = {
+ 00, /* 0000 - off */
+ 00, /* 0001 - off */
+ 10, /* 0010 - bypass */
+ 10, /* 0011 - bypass */
+ 20, /* 0100 - 2x */
+ 25, /* 0101 - 2.5x */
+ 30, /* 0110 - 3x */
+ 35, /* 0111 - 3.5x */
+ 40, /* 1000 - 4x */
+ 45, /* 1001 - 4.5x */
+ 50, /* 1010 - 5x */
+ 55, /* 1011 - 5.5x */
+ 60, /* 1100 - 6x */
+ 65, /* 1101 - 6.5x */
+ 70, /* 1110 - 7x */
+ 75, /* 1111 - 7.5 */
+ 80, /* 10000 - 8x */
+ 85, /* 10001 - 8.5x */
+ 90, /* 10010 - 9x */
+ 95, /* 10011 - 9.5x */
+ 100, /* 10100 - 10x */
+ 110, /* 10101 - 11x */
+ 120, /* 10110 - 12x */
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2)
+ *
+ * (Approx. GCLK frequency in Hz)
+ */
+
+int get_clocks (void)
+{
+ ulong clock = 0;
+
+#ifdef CONFIG_SYS_BUS_CLK
+ gd->bus_clk = CONFIG_SYS_BUS_CLK; /* bus clock is a fixed frequency */
+#else
+ gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
+#endif
+
+ /* calculate the clock frequency based upon the CPU type */
+ switch (get_cpu_type()) {
+ case CPU_7447A:
+ case CPU_7448:
+ case CPU_7455:
+ case CPU_7457:
+ /*
+ * Make sure division is done before multiplication to prevent 32-bit
+ * arithmetic overflows which will cause a negative number
+ */
+ clock = (gd->bus_clk / 10) *
+ hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
+ break;
+
+ case CPU_750GX:
+ case CPU_750FX:
+ clock = (gd->bus_clk / 10) *
+ hid1_fx_multipliers_x_10[get_hid1 () >> 27];
+ break;
+
+ case CPU_7450:
+ case CPU_740:
+ case CPU_740P:
+ case CPU_745:
+ case CPU_750CX:
+ case CPU_750:
+ case CPU_750P:
+ case CPU_755:
+ case CPU_7400:
+ case CPU_7410:
+ /*
+ * Make sure division is done before multiplication to prevent 32-bit
+ * arithmetic overflows which will cause a negative number
+ */
+ clock = (gd->bus_clk / 10) *
+ hid1_multipliers_x_10[get_hid1 () >> 28];
+ break;
+
+ case CPU_UNKNOWN:
+ printf ("get_gclk_freq(): unknown CPU type\n");
+ clock = 0;
+ return (1);
+ }
+
+ gd->cpu_clk = clock;
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright (C) 2001 Josh Huber <huber@mclx.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot - Startup Code for PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfff00100 and the code is executed
+ * from flash. The code is organized to be at an other address
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ */
+#include <config.h>
+#include <74xx_7xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if !defined(CONFIG_DB64360) && \
+ !defined(CONFIG_DB64460) && \
+ !defined(CONFIG_CPCI750) && \
+ !defined(CONFIG_P3Mx)
+#include <galileo/gt64260R.h>
+#endif
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+/* Machine Check and Recoverable Interr. */
+#define MSR_KERNEL ( MSR_ME | MSR_RI )
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+ sync
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+ sync
+
+ /* the boot code is located below the exception table */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* No FPU on MPC8xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ /*
+ * On the MPC8xx, this is a software emulation interrupt. It
+ * occurs for all unimplemented and illegal instructions.
+ */
+ STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x2000
+
+boot_cold:
+boot_warm:
+ /* disable everything */
+ li r0, 0
+ mtspr HID0, r0
+ sync
+ mtmsr 0
+ bl invalidate_bats
+ sync
+
+#ifdef CONFIG_SYS_L2
+ /* init the L2 cache */
+ addis r3, r0, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ sync
+ mtspr l2cr, r3
+#endif
+#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx)
+ .long 0x7e00066c
+ /*
+ * dssall instruction, gas doesn't have it yet
+ * ...for altivec, data stream stop all this probably
+ * isn't needed unless we warm (software) reboot U-Boot
+ */
+#endif
+
+#ifdef CONFIG_SYS_L2
+ /* invalidate the L2 cache */
+ bl l2cache_invalidate
+ sync
+#endif
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
+ /* do early init */
+ bl board_asm_init
+#endif
+
+ /*
+ * Calculate absolute address in FLASH and jump there
+ *------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*------------------------------------------------------*/
+
+ /* perform low-level init */
+ /* sdram init, galileo init, etc */
+ /* r3: NHR bit from HID0 */
+
+ /* setup the bats */
+ bl setup_bats
+ sync
+
+ /*
+ * Cache must be enabled here for stack-in-cache trick.
+ * This means we need to enable the BATS.
+ * This means:
+ * 1) for the EVB, original gt regs need to be mapped
+ * 2) need to have an IBAT for the 0xf region,
+ * we are running there!
+ * Cache should be turned on after BATs, since by default
+ * everything is write-through.
+ * The init-mem BAT can be reused after reloc. The old
+ * gt-regs BAT can be reused after board_init_f calls
+ * board_early_init_f (EVB only).
+ */
+#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
+ /* enable address translation */
+ bl enable_addr_trans
+ sync
+
+ /* enable and invalidate the data cache */
+ bl l1dcache_enable
+ sync
+#endif
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+ bl lock_ram_in_cache
+ sync
+#endif
+
+ /* set up the stack pointer in our newly created
+ * cache-ram (r1) */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ /* run low-level CPU init code (from Flash) */
+ bl cpu_init_f
+ sync
+
+ mr r3, r21
+
+ /* r3: BOOTFLAG */
+ /* run 1st part of board init code (from Flash) */
+ bl board_init_f
+ sync
+
+ /* NOTREACHED */
+
+ .globl invalidate_bats
+invalidate_bats:
+ /* invalidate BATs */
+ mtspr IBAT0U, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT3U, r0
+#ifdef CONFIG_HIGH_BATS
+ mtspr IBAT4U, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT7U, r0
+#endif
+ isync
+ mtspr DBAT0U, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT3U, r0
+#ifdef CONFIG_HIGH_BATS
+ mtspr DBAT4U, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT7U, r0
+#endif
+ isync
+ sync
+ blr
+
+ /* setup_bats - set them up to some initial state */
+ .globl setup_bats
+setup_bats:
+ addis r0, r0, 0x0000
+
+ /* IBAT 0 */
+ addis r4, r0, CONFIG_SYS_IBAT0L@h
+ ori r4, r4, CONFIG_SYS_IBAT0L@l
+ addis r3, r0, CONFIG_SYS_IBAT0U@h
+ ori r3, r3, CONFIG_SYS_IBAT0U@l
+ mtspr IBAT0L, r4
+ mtspr IBAT0U, r3
+ isync
+
+ /* DBAT 0 */
+ addis r4, r0, CONFIG_SYS_DBAT0L@h
+ ori r4, r4, CONFIG_SYS_DBAT0L@l
+ addis r3, r0, CONFIG_SYS_DBAT0U@h
+ ori r3, r3, CONFIG_SYS_DBAT0U@l
+ mtspr DBAT0L, r4
+ mtspr DBAT0U, r3
+ isync
+
+ /* IBAT 1 */
+ addis r4, r0, CONFIG_SYS_IBAT1L@h
+ ori r4, r4, CONFIG_SYS_IBAT1L@l
+ addis r3, r0, CONFIG_SYS_IBAT1U@h
+ ori r3, r3, CONFIG_SYS_IBAT1U@l
+ mtspr IBAT1L, r4
+ mtspr IBAT1U, r3
+ isync
+
+ /* DBAT 1 */
+ addis r4, r0, CONFIG_SYS_DBAT1L@h
+ ori r4, r4, CONFIG_SYS_DBAT1L@l
+ addis r3, r0, CONFIG_SYS_DBAT1U@h
+ ori r3, r3, CONFIG_SYS_DBAT1U@l
+ mtspr DBAT1L, r4
+ mtspr DBAT1U, r3
+ isync
+
+ /* IBAT 2 */
+ addis r4, r0, CONFIG_SYS_IBAT2L@h
+ ori r4, r4, CONFIG_SYS_IBAT2L@l
+ addis r3, r0, CONFIG_SYS_IBAT2U@h
+ ori r3, r3, CONFIG_SYS_IBAT2U@l
+ mtspr IBAT2L, r4
+ mtspr IBAT2U, r3
+ isync
+
+ /* DBAT 2 */
+ addis r4, r0, CONFIG_SYS_DBAT2L@h
+ ori r4, r4, CONFIG_SYS_DBAT2L@l
+ addis r3, r0, CONFIG_SYS_DBAT2U@h
+ ori r3, r3, CONFIG_SYS_DBAT2U@l
+ mtspr DBAT2L, r4
+ mtspr DBAT2U, r3
+ isync
+
+ /* IBAT 3 */
+ addis r4, r0, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ addis r3, r0, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+ isync
+
+ /* DBAT 3 */
+ addis r4, r0, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ addis r3, r0, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+ isync
+
+#ifdef CONFIG_HIGH_BATS
+ /* IBAT 4 */
+ addis r4, r0, CONFIG_SYS_IBAT4L@h
+ ori r4, r4, CONFIG_SYS_IBAT4L@l
+ addis r3, r0, CONFIG_SYS_IBAT4U@h
+ ori r3, r3, CONFIG_SYS_IBAT4U@l
+ mtspr IBAT4L, r4
+ mtspr IBAT4U, r3
+ isync
+
+ /* DBAT 4 */
+ addis r4, r0, CONFIG_SYS_DBAT4L@h
+ ori r4, r4, CONFIG_SYS_DBAT4L@l
+ addis r3, r0, CONFIG_SYS_DBAT4U@h
+ ori r3, r3, CONFIG_SYS_DBAT4U@l
+ mtspr DBAT4L, r4
+ mtspr DBAT4U, r3
+ isync
+
+ /* IBAT 5 */
+ addis r4, r0, CONFIG_SYS_IBAT5L@h
+ ori r4, r4, CONFIG_SYS_IBAT5L@l
+ addis r3, r0, CONFIG_SYS_IBAT5U@h
+ ori r3, r3, CONFIG_SYS_IBAT5U@l
+ mtspr IBAT5L, r4
+ mtspr IBAT5U, r3
+ isync
+
+ /* DBAT 5 */
+ addis r4, r0, CONFIG_SYS_DBAT5L@h
+ ori r4, r4, CONFIG_SYS_DBAT5L@l
+ addis r3, r0, CONFIG_SYS_DBAT5U@h
+ ori r3, r3, CONFIG_SYS_DBAT5U@l
+ mtspr DBAT5L, r4
+ mtspr DBAT5U, r3
+ isync
+
+ /* IBAT 6 */
+ addis r4, r0, CONFIG_SYS_IBAT6L@h
+ ori r4, r4, CONFIG_SYS_IBAT6L@l
+ addis r3, r0, CONFIG_SYS_IBAT6U@h
+ ori r3, r3, CONFIG_SYS_IBAT6U@l
+ mtspr IBAT6L, r4
+ mtspr IBAT6U, r3
+ isync
+
+ /* DBAT 6 */
+ addis r4, r0, CONFIG_SYS_DBAT6L@h
+ ori r4, r4, CONFIG_SYS_DBAT6L@l
+ addis r3, r0, CONFIG_SYS_DBAT6U@h
+ ori r3, r3, CONFIG_SYS_DBAT6U@l
+ mtspr DBAT6L, r4
+ mtspr DBAT6U, r3
+ isync
+
+ /* IBAT 7 */
+ addis r4, r0, CONFIG_SYS_IBAT7L@h
+ ori r4, r4, CONFIG_SYS_IBAT7L@l
+ addis r3, r0, CONFIG_SYS_IBAT7U@h
+ ori r3, r3, CONFIG_SYS_IBAT7U@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+ isync
+
+ /* DBAT 7 */
+ addis r4, r0, CONFIG_SYS_DBAT7L@h
+ ori r4, r4, CONFIG_SYS_DBAT7L@l
+ addis r3, r0, CONFIG_SYS_DBAT7U@h
+ ori r3, r3, CONFIG_SYS_DBAT7U@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+ isync
+#endif
+
+ /* bats are done, now invalidate the TLBs */
+
+ addis r3, 0, 0x0000
+ addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */
+
+ isync
+
+tlblp:
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmp 0, 0, r3, r5
+ blt tlblp
+
+ blr
+
+ .globl enable_addr_trans
+enable_addr_trans:
+ /* enable address translation */
+ mfmsr r5
+ ori r5, r5, (MSR_IR | MSR_DR)
+ mtmsr r5
+ isync
+ blr
+
+ .globl disable_addr_trans
+disable_addr_trans:
+ /* disable address translation */
+ mflr r4
+ mfmsr r3
+ andi. r0, r3, (MSR_IR | MSR_DR)
+ beqlr
+ andc r3, r3, r0
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+ .globl dc_read
+dc_read:
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*-----------------------------------------------------------------------*/
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+#ifdef CONFIG_ECC
+ bl board_relocate_rom
+ sync
+ mr r3, r10 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+#else
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+#endif
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+#ifdef CONFIG_ECC
+ bl board_init_ecc
+#endif
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+/* clear_bss: */
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+ mr r3, r10 /* Destination Address */
+#if defined(CONFIG_AMIGAONEG3SE) || \
+ defined(CONFIG_DB64360) || \
+ defined(CONFIG_DB64460) || \
+ defined(CONFIG_CPCI750) || \
+ defined(CONFIG_PPMC7XX) || \
+ defined(CONFIG_P3Mx)
+ mr r4, r9 /* Use RAM copy of the global data */
+#endif
+ bl after_reloc
+
+ /* not reached - end relocate_code */
+/*-----------------------------------------------------------------------*/
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ /* enable execptions from RAM vectors */
+ mfmsr r7
+ li r8,MSR_IP
+ andc r7,r7,r8
+ mtmsr r7
+
+ mtlr r4 /* restore link register */
+ blr
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+lock_ram_in_cache:
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1:
+ dcbz r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+
+ /* Lock the data cache */
+ mfspr r0, HID0
+ ori r0, r0, 0x1000
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1: icbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+
+ /* Unlock the data cache and invalidate it */
+ mfspr r0, HID0
+ li r3,0x1000
+ andc r0,r0,r3
+ li r3,0x0400
+ or r0,r0,r3
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_AMIGAONEG3SE
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#ifdef CONFIG_AMIGAONEG3SE
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+#else
+#define END_OF_MEM 0x02000000
+#endif
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void
+show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
+ " %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP:"
+ " %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ printf("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
+ int i, j;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+
+ p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0);
+ p -= 32;
+ for (i = 0; i < 256; i+=16) {
+ printf("%08x: ", (unsigned int)p+i);
+ for (j = 0; j < 16; j++) {
+ printf("%02x ", p[i+j]);
+ }
+ printf("\n");
+ }
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+#
+# (C) Copyright 2007-2009 DENX Software Engineering
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(OBJTREE)/board/freescale/common)
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+COBJS-y := cpu.o
+COBJS-y += traps.o
+COBJS-y += cpu_init.o
+COBJS-y += fixed_sdram.o
+COBJS-y += i2c.o
+COBJS-y += interrupts.o
+COBJS-y += iopin.o
+COBJS-y += serial.o
+COBJS-y += speed.o
+COBJS-${CONFIG_FSL_DIU_FB} += diu.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../../../board/freescale/common/fsl_diu_fb.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../../../board/freescale/common/fsl_logo_bmp.o
+COBJS-${CONFIG_CMD_IDE} += ide.o
+COBJS-${CONFIG_IIM} += iim.o
+COBJS-$(CONFIG_PCI) += pci.o
+
+COBJS := $(COBJS-y)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * needed for arch/powerpc/cpu/mpc512x/start.S
+ *
+ * These should be auto-generated
+ */
+#define LPCS0AW 0x0024
+#define SRAMBAR 0x00C4
+#define SWCRR 0x0904
+#define LPC_OFFSET 0x10000
+#define CS0_CONFIG 0x00000
+#define CS_CTRL 0x00020
+#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */
+
+#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
--- /dev/null
+#
+# (C) Copyright 2007-2009 DENX Software Engineering
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
+ -ffixed-r2 -msoft-float -mcpu=603e
+
+# Use default linker script.
+# A board port can override this setting in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc512x/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2007-2010 DENX Software Engineering
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC512x family.
+ *
+ * Derived from the MPC83xx code.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ ulong clock = gd->cpu_clk;
+ u32 pvr = get_pvr ();
+ u32 spridr = in_be32(&immr->sysconf.spridr);
+ char buf1[32], buf2[32];
+
+ puts ("CPU: ");
+
+ switch (spridr & 0xffff0000) {
+ case SPR_5121E:
+ puts ("MPC5121e ");
+ break;
+ default:
+ printf ("Unknown part ID %08x ", spridr & 0xffff0000);
+ }
+ printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr));
+
+ switch (pvr & 0xffff0000) {
+ case PVR_E300C4:
+ puts ("e300c4 ");
+ break;
+ default:
+ puts ("unknown ");
+ }
+ printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n",
+ strmhz(buf1, clock),
+ strmhz(buf2, gd->csb_clk),
+ gd->reset_status & 0xffff);
+ return 0;
+}
+
+
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~( MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Enable Reset Control Reg - "RSTE" is the magic word that let us go
+ */
+ out_be32(&immap->reset.rpr, 0x52535445);
+
+ /* Verify Reset Control Reg is enabled */
+ while (!(in_be32(&immap->reset.rcer) & RCER_CRE))
+ ;
+
+ printf ("Resetting the board.\n");
+ udelay(200);
+
+ /* Perform reset */
+ out_be32(&immap->reset.rcr, RCR_SWHR);
+
+ /* Unreached... */
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return tbclk;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ /* Reset watchdog */
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ out_be32(&immr->wdt.swsrr, 0x556c);
+ out_be32(&immr->wdt.swsrr, 0xaa39);
+
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif
+
+#ifdef CONFIG_OF_LIBFDT
+
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+/*
+ * fdt setup for old device trees
+ * fix up
+ * cpu clocks
+ * soc clocks
+ * ethernet addresses
+ */
+static void old_ft_cpu_setup(void *blob, bd_t *bd)
+{
+ /*
+ * avoid fixing up by path because that
+ * produces scary error messages
+ */
+ uchar enetaddr[6];
+
+ /*
+ * old device trees have ethernet nodes with
+ * device_type = "network"
+ */
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ do_fixup_by_prop(blob, "device_type", "network", 8,
+ "local-mac-address", enetaddr, 6, 0);
+ do_fixup_by_prop(blob, "device_type", "network", 8,
+ "address", enetaddr, 6, 0);
+ /*
+ * old device trees have soc nodes with
+ * device_type = "soc"
+ */
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_ipsfreq, 0);
+}
+#endif
+
+static void ft_clock_setup(void *blob, bd_t *bd)
+{
+ char *cpu_path = "/cpus/" OF_CPU;
+
+ /*
+ * fixup cpu clocks using path
+ */
+ do_fixup_by_path_u32(blob, cpu_path,
+ "timebase-frequency", OF_TBCLK, 1);
+ do_fixup_by_path_u32(blob, cpu_path,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_path_u32(blob, cpu_path,
+ "clock-frequency", bd->bi_intfreq, 1);
+ /*
+ * fixup soc clocks using compatible
+ */
+ do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
+ "bus-frequency", bd->bi_ipsfreq, 1);
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+ old_ft_cpu_setup(blob, bd);
+#endif
+ ft_clock_setup(blob, bd);
+#ifdef CONFIG_HAS_ETH0
+ fdt_fixup_ethernet(blob);
+#endif
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif
+
+#ifdef CONFIG_MPC512x_FEC
+/* Default initializations for FEC controllers. To override,
+ * create a board-specific function called:
+ * int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+ return mpc512x_fec_initialize(bis);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Derived from the MPC83xx code.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Set up the memory map, initialize registers,
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ u32 ips_div;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* system performance tweaking */
+
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
+ /* Arbiter pipeline depth */
+ out_be32(&im->arbiter.acr,
+ (im->arbiter.acr & ~ACR_PIPE_DEP) |
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT)
+ );
+#endif
+
+#ifdef CONFIG_SYS_ACR_RPTCNT
+ /* Arbiter repeat count */
+ out_be32(im->arbiter.acr,
+ (im->arbiter.acr & ~(ACR_RPTCNT)) |
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT)
+ );
+#endif
+
+ /* RSR - Reset Status Register - clear all status */
+ gd->reset_status = im->reset.rsr;
+ out_be32(&im->reset.rsr, ~RSR_RES);
+
+ /*
+ * RMR - Reset Mode Register - enable checkstop reset
+ */
+ out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT));
+
+ /* Set IPS-CSB divider: IPS = 1/2 CSB */
+ ips_div = in_be32(&im->clk.scfr[0]);
+ ips_div &= ~(SCFR1_IPS_DIV_MASK);
+ ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT;
+ out_be32(&im->clk.scfr[0], ips_div);
+
+ /*
+ * Enable Time Base/Decrementer
+ *
+ * NOTICE: TB needs to be enabled as early as possible in order to
+ * have udelay() working; if not enabled, usually leads to a hang, like
+ * during FLASH chip identification etc.
+ */
+ setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
+}
+
+int cpu_init_r (void)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include "../../../../board/freescale/common/fsl_diu_fb.h"
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+#include <stdio_dev.h>
+#include <video_fb.h>
+#endif
+
+#ifdef CONFIG_FSL_DIU_LOGO_BMP
+extern unsigned int FSL_Logo_BMP[];
+#else
+#define FSL_Logo_BMP NULL
+#endif
+
+static int xres, yres;
+
+void diu_set_pixel_clock(unsigned int pixclock)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile clk512x_t *clk = &immap->clk;
+ volatile unsigned int *clkdvdr = &clk->scfr[0];
+ unsigned long speed_ccb, temp, pixval;
+
+ speed_ccb = get_bus_freq(0) * 4;
+ temp = 1000000000/pixclock;
+ temp *= 1000;
+ pixval = speed_ccb / temp;
+ debug("DIU pixval = %lu\n", pixval);
+
+ /* Modify PXCLK in GUTS CLKDVDR */
+ debug("DIU: Current value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
+ temp = in_be32(clkdvdr) & 0xFFFFFF00;
+ out_be32(clkdvdr, temp | (pixval & 0xFF));
+ debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
+}
+
+char *valid_bmp(char *addr)
+{
+ unsigned long h_addr;
+
+ h_addr = simple_strtoul(addr, NULL, 16);
+ if (h_addr < CONFIG_SYS_FLASH_BASE ||
+ h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
+ printf("bmp addr %lx is not a valid flash address\n", h_addr);
+ return 0;
+ } else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
+ printf("bmp addr is not a bmp\n");
+ return 0;
+ } else
+ return (char *)h_addr;
+}
+
+int mpc5121_diu_init(void)
+{
+ unsigned int pixel_format;
+ char *bmp = NULL;
+ char *bmp_env;
+
+ xres = 1024;
+ yres = 768;
+ pixel_format = 0x88883316;
+
+ debug("mpc5121_diu_init\n");
+ bmp_env = getenv("diu_bmp_addr");
+ if (bmp_env) {
+ bmp = valid_bmp(bmp_env);
+ }
+ if (!bmp)
+ bmp = (char *)FSL_Logo_BMP;
+ return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
+}
+
+int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[])
+{
+ unsigned int addr;
+
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ if (!strncmp(argv[1], "init", 4)) {
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+ fsl_diu_clear_screen();
+ drv_video_init();
+#else
+ return mpc5121_diu_init();
+#endif
+ } else {
+ addr = simple_strtoul(argv[1], NULL, 16);
+ fsl_diu_clear_screen();
+ fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ diufb, CONFIG_SYS_MAXARGS, 1, mpc5121diu_init_show_bmp,
+ "Init or Display BMP file",
+ "init\n - initialize DIU\n"
+ "addr\n - display bmp at address 'addr'"
+ );
+
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+void *video_hw_init(void)
+{
+ GraphicDevice *pGD = (GraphicDevice *) &ctfb;
+ struct fb_info *info;
+
+ if (mpc5121_diu_init() < 0)
+ return NULL;
+
+ /* fill in Graphic device struct */
+ sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
+ xres, yres, 32, 64, 60);
+
+ pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
+ pGD->winSizeX = xres;
+ pGD->winSizeY = yres - info->logo_height;
+ pGD->plnSizeX = pGD->winSizeX;
+ pGD->plnSizeY = pGD->winSizeY;
+
+ pGD->gdfBytesPP = 4;
+ pGD->gdfIndex = GDF_32BIT_X888RGB;
+
+ pGD->isaBase = 0;
+ pGD->pciBase = 0;
+ pGD->memSize = info->screen_size - info->logo_size;
+
+ /* Cursor Start Address */
+ pGD->dprBase = 0;
+ pGD->vprBase = 0;
+ pGD->cprBase = 0;
+
+ return (void *)pGD;
+}
+
+/**
+ * Set the LUT
+ *
+ * @index: color number
+ * @r: red
+ * @b: blue
+ * @g: green
+ */
+void video_set_lut
+ (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
+{
+ return;
+}
+
+#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
--- /dev/null
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mpc512x.h>
+
+/*
+ * MDDRC Config Runtime Settings
+ */
+ddr512x_config_t default_mddrc_config = {
+ .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG,
+ .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
+ .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1,
+ .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2,
+};
+
+u32 default_init_seq[] = {
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_MICRON_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_EM2,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_EM2,
+ CONFIG_SYS_DDRCMD_EM3,
+ CONFIG_SYS_DDRCMD_EN_DLL,
+ CONFIG_SYS_MICRON_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_MICRON_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_OCD_DEFAULT,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_NOP
+};
+
+/*
+ * fixed sdram init:
+ * The board doesn't use memory modules that have serial presence
+ * detect or similar mechanism for discovery of the DRAM settings
+ */
+long int fixed_sdram(ddr512x_config_t *mddrc_config,
+ u32 *dram_init_seq, int seq_sz)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+ u32 i;
+
+ /* take default settings and init sequence if necessary */
+ if (mddrc_config == NULL)
+ mddrc_config = &default_mddrc_config;
+ if (dram_init_seq == NULL) {
+ dram_init_seq = default_init_seq;
+ seq_sz = sizeof(default_init_seq)/sizeof(u32);
+ }
+
+ /* Initialize IO Control */
+ out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
+
+ /* Initialize DDR Local Window */
+ out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
+ out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
+ sync_law(&im->sysconf.ddrlaw.ar);
+
+ /* DDR Enable */
+ out_be32(&im->mddrc.ddr_sys_config, MDDRC_SYS_CFG_EN);
+
+ /* Initialize DDR Priority Manager */
+ out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
+ out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
+ out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
+ out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
+ out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
+ out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
+ out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
+ out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
+ out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
+ out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
+ out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
+ out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
+ out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
+ out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
+ out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
+ out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
+ out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
+ out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
+ out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
+ out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
+ out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
+ out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
+ out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
+
+ /*
+ * Initialize MDDRC
+ * put MDDRC in CMD mode and
+ * set the max time between refreshes to 0 during init process
+ */
+ out_be32(&im->mddrc.ddr_sys_config,
+ mddrc_config->ddr_sys_config | MDDRC_SYS_CFG_CMD_MASK);
+ out_be32(&im->mddrc.ddr_time_config0,
+ mddrc_config->ddr_time_config0 & MDDRC_REFRESH_ZERO_MASK);
+ out_be32(&im->mddrc.ddr_time_config1,
+ mddrc_config->ddr_time_config1);
+ out_be32(&im->mddrc.ddr_time_config2,
+ mddrc_config->ddr_time_config2);
+
+ /* Initialize DDR with either default or supplied init sequence */
+ for (i = 0; i < seq_sz; i++)
+ out_be32(&im->mddrc.ddr_command, dram_init_seq[i]);
+
+ /* Start MDDRC */
+ out_be32(&im->mddrc.ddr_time_config0, mddrc_config->ddr_time_config0);
+ out_be32(&im->mddrc.ddr_sys_config, mddrc_config->ddr_sys_config);
+
+ return msize;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003 - 2009
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on the MPC5xxx code.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HARD_I2C
+
+#include <i2c.h>
+
+/* by default set I2C bus 0 active */
+static unsigned int bus_num __attribute__ ((section (".data"))) = 0;
+
+#define I2C_TIMEOUT 100
+#define I2C_RETRIES 3
+
+struct mpc512x_i2c_tap {
+ int scl2tap;
+ int tap2tap;
+};
+
+static int mpc_reg_in(volatile u32 *reg);
+static void mpc_reg_out(volatile u32 *reg, int val, int mask);
+static int wait_for_bb(void);
+static int wait_for_pin(int *status);
+static int do_address(uchar chip, char rdwr_flag);
+static int send_bytes(uchar chip, char *buf, int len);
+static int receive_bytes(uchar chip, char *buf, int len);
+static int mpc_get_fdr(int);
+
+static int mpc_reg_in (volatile u32 *reg)
+{
+ int ret = in_be32(reg) >> 24;
+
+ return ret;
+}
+
+static void mpc_reg_out (volatile u32 *reg, int val, int mask)
+{
+ if (!mask) {
+ out_be32(reg, val << 24);
+ } else {
+ clrsetbits_be32(reg, mask << 24, (val & mask) << 24);
+ }
+}
+
+static int wait_for_bb (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int timeout = I2C_TIMEOUT;
+ int status;
+
+ status = mpc_reg_in (®s->msr);
+
+ while (timeout-- && (status & I2C_BB)) {
+ volatile int temp;
+ mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
+ temp = mpc_reg_in (®s->mdr);
+ mpc_reg_out (®s->mcr, 0, I2C_STA);
+ mpc_reg_out (®s->mcr, 0, 0);
+ mpc_reg_out (®s->mcr, I2C_EN, 0);
+
+ udelay (1000);
+ status = mpc_reg_in (®s->msr);
+ }
+
+ return (status & I2C_BB);
+}
+
+static int wait_for_pin (int *status)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int timeout = I2C_TIMEOUT;
+
+ *status = mpc_reg_in (®s->msr);
+
+ while (timeout-- && !(*status & I2C_IF)) {
+ udelay (1000);
+ *status = mpc_reg_in (®s->msr);
+ }
+
+ if (!(*status & I2C_IF)) {
+ return -1;
+ }
+
+ mpc_reg_out (®s->msr, 0, I2C_IF);
+
+ return 0;
+}
+
+static int do_address (uchar chip, char rdwr_flag)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int status;
+
+ chip <<= 1;
+
+ if (rdwr_flag) {
+ chip |= 1;
+ }
+
+ mpc_reg_out (®s->mcr, I2C_TX, I2C_TX);
+ mpc_reg_out (®s->mdr, chip, 0);
+
+ if (wait_for_pin (&status)) {
+ return -2;
+ }
+
+ if (status & I2C_RXAK) {
+ return -3;
+ }
+
+ return 0;
+}
+
+static int send_bytes (uchar chip, char *buf, int len)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int wrcount;
+ int status;
+
+ for (wrcount = 0; wrcount < len; ++wrcount) {
+
+ mpc_reg_out (®s->mdr, buf[wrcount], 0);
+
+ if (wait_for_pin (&status)) {
+ break;
+ }
+
+ if (status & I2C_RXAK) {
+ break;
+ }
+
+ }
+
+ return !(wrcount == len);
+}
+
+static int receive_bytes (uchar chip, char *buf, int len)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int dummy = 1;
+ int rdcount = 0;
+ int status;
+ int i;
+
+ mpc_reg_out (®s->mcr, 0, I2C_TX);
+
+ for (i = 0; i < len; ++i) {
+ buf[rdcount] = mpc_reg_in (®s->mdr);
+
+ if (dummy) {
+ dummy = 0;
+ } else {
+ rdcount++;
+ }
+
+ if (wait_for_pin (&status)) {
+ return -4;
+ }
+ }
+
+ mpc_reg_out (®s->mcr, I2C_TXAK, I2C_TXAK);
+ buf[rdcount++] = mpc_reg_in (®s->mdr);
+
+ if (wait_for_pin (&status)) {
+ return -5;
+ }
+
+ mpc_reg_out (®s->mcr, 0, I2C_TXAK);
+
+ return 0;
+}
+
+/**************** I2C API ****************/
+
+void i2c_init (int speed, int saddr)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ int i;
+
+ for (i = 0; i < I2C_BUS_CNT; i++){
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[i];
+
+ mpc_reg_out (®s->mcr, 0, 0);
+
+ /* Set clock */
+ mpc_reg_out (®s->mfdr, mpc_get_fdr (speed), 0);
+ mpc_reg_out (®s->madr, saddr << 1, 0);
+
+ /* Enable module */
+ mpc_reg_out (®s->mcr, I2C_EN, I2C_INIT_MASK);
+ mpc_reg_out (®s->msr, 0, I2C_IF);
+ }
+
+ /* Disable interrupts */
+ out_be32(&im->i2c.icr, 0);
+
+ /* Turn off filters */
+ out_be32(&im->i2c.mifr, 0);
+}
+
+static int mpc_get_fdr (int speed)
+{
+ static int fdr = -1;
+
+ if (fdr == -1) {
+ ulong best_speed = 0;
+ ulong divider;
+ ulong ips, scl;
+ ulong bestmatch = 0xffffffffUL;
+ int best_i = 0, best_j = 0, i, j;
+ int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
+ struct mpc512x_i2c_tap scltap[] = {
+ {4, 1},
+ {4, 2},
+ {6, 4},
+ {6, 8},
+ {14, 16},
+ {30, 32},
+ {62, 64},
+ {126, 128}
+ };
+
+ ips = gd->ips_clk;
+ for (i = 7; i >= 0; i--) {
+ for (j = 7; j >= 0; j--) {
+ scl = 2 * (scltap[j].scl2tap +
+ (SCL_Tap[i] - 1) * scltap[j].tap2tap
+ + 2);
+ if (ips <= speed*scl) {
+ if ((speed*scl - ips) < bestmatch) {
+ bestmatch = speed*scl - ips;
+ best_i = i;
+ best_j = j;
+ best_speed = ips/scl;
+ }
+ }
+ }
+ }
+ divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
+ if (gd->flags & GD_FLG_RELOC) {
+ fdr = divider;
+ } else {
+ debug("%ld kHz, \n", best_speed / 1000);
+ return divider;
+ }
+ }
+
+ return fdr;
+}
+
+int i2c_probe (uchar chip)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ int i;
+
+ for (i = 0; i < I2C_RETRIES; i++) {
+ mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
+
+ if (! do_address (chip, 0)) {
+ mpc_reg_out (®s->mcr, 0, I2C_STA);
+ udelay (500);
+ break;
+ }
+
+ mpc_reg_out (®s->mcr, 0, I2C_STA);
+ udelay (500);
+ }
+
+ return (i == I2C_RETRIES);
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ char xaddr[4];
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb ()) {
+ printf ("i2c_read: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
+ if (do_address (chip, 0)) {
+ printf ("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, &xaddr[4-alen], alen)) {
+ printf ("i2c_read: send_bytes failed\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->mcr, I2C_RSTA, I2C_RSTA);
+ if (do_address (chip, 1)) {
+ printf ("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (receive_bytes (chip, (char *)buf, len)) {
+ printf ("i2c_read: receive_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+Done:
+ mpc_reg_out (®s->mcr, 0, I2C_STA);
+ return ret;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
+ char xaddr[4];
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb ()) {
+ printf ("i2c_write: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
+ if (do_address (chip, 0)) {
+ printf ("i2c_write: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, &xaddr[4-alen], alen)) {
+ printf ("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, (char *)buf, len)) {
+ printf ("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+Done:
+ mpc_reg_out (®s->mcr, 0, I2C_STA);
+ return ret;
+}
+
+int i2c_set_bus_num (unsigned int bus)
+{
+ if (bus >= I2C_BUS_CNT) {
+ return -1;
+ }
+ bus_num = bus;
+
+ return 0;
+}
+
+unsigned int i2c_get_bus_num (void)
+{
+ return bus_num;
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_IDE_RESET)
+
+void ide_set_reset (int idereset)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ debug ("ide_set_reset(%d)\n", idereset);
+
+ if (idereset) {
+ out_be32(&im->pata.pata_ata_control, 0);
+ } else {
+ out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B);
+ }
+ udelay(100);
+}
+
+void init_ide_reset (void)
+{
+ debug ("init_ide_reset\n");
+
+ /*
+ * Clear the reset bit to reset the interface
+ * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
+ */
+ ide_set_reset(1);
+
+ /* Assert the reset bit to enable the interface */
+ ide_set_reset(0);
+
+}
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+int ide_preinit (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ long t;
+ const struct {
+ short t0;
+ short t1;
+ short t2_8;
+ short t2_16;
+ short t2i;
+ short t4;
+ short t9;
+ short tA;
+ } pio_specs = {
+ .t0 = 600,
+ .t1 = 70,
+ .t2_8 = 290,
+ .t2_16 = 165,
+ .t2i = 0,
+ .t4 = 30,
+ .t9 = 20,
+ .tA = 50,
+ };
+ union {
+ u32 config;
+ struct {
+ u8 field1;
+ u8 field2;
+ u8 field3;
+ u8 field4;
+ }bytes;
+ } cfg;
+
+ debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
+ (u32)&im->pata);
+
+ /* Set the reset bit to 1 to enable the interface */
+ ide_set_reset(0);
+
+ /* Init timings : we use PIO mode 0 timings */
+ t = 1000000000 / gd->ips_clk; /* period in ns */
+ cfg.bytes.field1 = 3;
+ cfg.bytes.field2 = 3;
+ cfg.bytes.field3 = (pio_specs.t1 + t) / t;
+ cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
+
+ out_be32(&im->pata.pata_time1, cfg.config);
+
+ cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
+ cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
+ cfg.bytes.field3 = 1;
+ cfg.bytes.field4 = (pio_specs.t4 + t) / t;
+
+ out_be32(&im->pata.pata_time2, cfg.config);
+
+ cfg.config = in_be32(&im->pata.pata_time3);
+ cfg.bytes.field1 = (pio_specs.t9 + t) / t;
+
+ out_be32(&im->pata.pata_time3, cfg.config);
+
+ debug ("PATA preinit complete.\n");
+
+ return 0;
+}
+
+#endif /* defined(CONFIG_IDE_RESET) */
--- /dev/null
+/*
+ * Copyright 2008 Silicon Turnkey Express, Inc.
+ * Martha Marx <mmarx@silicontkx.com>
+ *
+ * ADS5121 IIM (Fusebox) Interface
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_CMD_FUSE
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static char cur_bank = '1';
+
+char *iim_err_msg(u32 err)
+{
+ static char *IIM_errs[] = {
+ "Parity Error in cache",
+ "Explicit Sense Cycle Error",
+ "Write to Locked Register Error",
+ "Read Protect Error",
+ "Override Protect Error",
+ "Write Protect Error"};
+
+ int i;
+
+ if (!err)
+ return "";
+ for (i = 1; i < 8; i++)
+ if (err & (1 << i))
+ printf("IIM - %s\n", IIM_errs[i-1]);
+ return "";
+}
+
+int in_range(int n, int min, int max, char *err, char *usg)
+{
+ if (n > max || n < min) {
+ printf(err);
+ printf("Usage:\n%s\n", usg);
+ return 0;
+ }
+ return 1;
+}
+
+int ads5121_fuse_read(int bank, int fstart, int num)
+{
+ iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
+ u32 *iim_fb, dummy;
+ int f, ctr;
+
+ out_be32(&iim->err, in_be32(&iim->err));
+ if (bank == 0)
+ iim_fb = (u32 *)&(iim->fbac0);
+ else
+ iim_fb = (u32 *)&(iim->fbac1);
+/* try a read to see if Read Protect is set */
+ dummy = in_be32(&iim_fb[0]);
+ if (in_be32(&iim->err) & IIM_ERR_RPE) {
+ printf("\tRead protect fuse is set\n");
+ out_be32(&iim->err, IIM_ERR_RPE);
+ return 0;
+ }
+ printf("Reading Bank %d cache\n", bank);
+ for (f = fstart, ctr = 0; num > 0; ctr++, num--, f++) {
+ if (ctr % 4 == 0)
+ printf("F%2d:", f);
+ printf("\t%#04x", (u8)(iim_fb[f]));
+ if (ctr % 4 == 3)
+ printf("\n");
+ }
+ if (ctr % 4 != 0)
+ printf("\n");
+}
+
+int ads5121_fuse_override(int bank, int f, u8 val)
+{
+ iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
+ u32 *iim_fb;
+ u32 iim_stat;
+ int i;
+
+ out_be32(&iim->err, in_be32(&iim->err));
+ if (bank == 0)
+ iim_fb = (u32 *)&(iim->fbac0);
+ else
+ iim_fb = (u32 *)&(iim->fbac1);
+/* try a read to see if Read Protect is set */
+ iim_stat = in_be32(&iim_fb[0]);
+ if (in_be32(&iim->err) & IIM_ERR_RPE) {
+ printf("Read protect fuse is set on bank %d;"
+ "Override protect may also be set\n", bank);
+ printf("An attempt will be made to override\n");
+ out_be32(&iim->err, IIM_ERR_RPE);
+ }
+ if (iim_stat & IIM_FBAC_FBOP) {
+ printf("Override protect fuse is set on bank %d\n", bank);
+ return 1;
+ }
+ if (f > IIM_FMAX) /* reset the entire bank */
+ for (i = 0; i < IIM_FMAX + 1; i++)
+ out_be32(&iim_fb[i], 0);
+ else
+ out_be32(&iim_fb[f], val);
+ return 0;
+}
+
+int ads5121_fuse_prog(cmd_tbl_t *cmdtp, int bank, char *fuseno_bitno)
+{
+ iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
+ int f, i, bitno;
+ u32 stat, err;
+
+ f = simple_strtol(fuseno_bitno, NULL, 10);
+ if (f == 0 && fuseno_bitno[0] != '0')
+ f = -1;
+ if (!in_range(f, 0, IIM_FMAX,
+ "<frow> must be between 0-31\n\n", cmdtp->usage))
+ return 1;
+ bitno = -1;
+ for (i = 0; i < 6; i++) {
+ if (fuseno_bitno[i] == '_') {
+ bitno = simple_strtol(&(fuseno_bitno[i+1]), NULL, 10);
+ if (bitno == 0 && fuseno_bitno[i+1] != '0')
+ bitno = -1;
+ break;
+ }
+ }
+ if (!in_range(bitno, 0, 7, "Bit number ranges from 0-7\n"
+ "Example of <frow_bitno>: \"18_4\" sets bit 4 of row 18\n",
+ cmdtp->usage))
+ return 1;
+ out_be32(&iim->err, in_be32(&iim->err));
+ out_be32(&iim->prg_p, IIM_PRG_P_SET);
+ out_be32(&iim->ua, IIM_SET_UA(bank, f));
+ out_be32(&iim->la, IIM_SET_LA(f, bitno));
+#ifdef DEBUG
+ printf("Programming disabled with DEBUG defined \n");
+ printf(""Set up to pro
+ printf("iim.ua = %x; iim.la = %x\n", iim->ua, iim->la);
+#else
+ out_be32(&iim->fctl, IIM_FCTL_PROG_PULSE | IIM_FCTL_PROG);
+ do
+ udelay(20);
+ while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
+ out_be32(&iim->prg_p, 0);
+ err = in_be32(&iim->err);
+ if (stat & IIM_STAT_PRGD) {
+ if (!(err & (IIM_ERR_WPE | IIM_ERR_WPE))) {
+ printf("Fuse is successfully set");
+ if (err)
+ printf(" - however there are other errors");
+ printf("\n");
+ }
+ iim->stat = 0;
+ }
+ if (err) {
+ iim_err_msg(err);
+ out_be32(&iim->err, in_be32(&iim->err));
+ }
+#endif
+}
+
+int ads5121_fuse_sense(int bank, int fstart, int num)
+{
+ iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
+ u32 iim_fbac;
+ u32 stat, err, err_hold = 0;
+ int f, ctr;
+
+ out_be32(&iim->err, in_be32(&iim->err));
+ if (bank == 0)
+ iim_fbac = in_be32(&iim->fbac0);
+ else
+ iim_fbac = in_be32(&iim->fbac1);
+ if (iim_fbac & IIM_FBAC_FBESP) {
+ printf("\tSense Protect disallows this operation\n");
+ out_be32(&iim->err, IIM_FBAC_FBESP);
+ return 1;
+ }
+ err = in_be32(&iim->err);
+ if (err) {
+ iim_err_msg(err);
+ err_hold |= err;
+ }
+ if (err & IIM_ERR_RPE)
+ printf("\tRead protect fuse is set; "
+ "Sense Protect may be set but will be attempted\n");
+ if (err)
+ out_be32(&iim->err, err);
+ printf("Sensing fuse(s) on Bank %d\n", bank);
+ for (f = fstart, ctr = 0; num > 0; ctr++, f++, num--) {
+ out_be32(&iim->ua, IIM_SET_UA(bank, f));
+ out_be32(&iim->la, IIM_SET_LA(f, 0));
+ out_be32(&iim->fctl, IIM_FCTL_ESNS_N);
+ do
+ udelay(20);
+ while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
+ err = in_be32(&iim->err);
+ if (err & IIM_ERR_SNSE) {
+ iim_err_msg(err);
+ out_be32(&iim->err, IIM_ERR_SNSE);
+ return 1;
+ }
+ if (stat & IIM_STAT_SNSD) {
+ out_be32(&iim->stat, 0);
+ if (ctr % 4 == 0)
+ printf("F%2d:", f);
+ printf("\t%#04x", (u8)iim->sdat);
+ if (ctr % 4 == 3)
+ printf("\n");
+ }
+ if (err) {
+ err_hold |= err;
+ out_be32(&iim->err, err);
+ }
+ }
+ if (ctr % 4 != 0)
+ printf("\n");
+ if (err_hold)
+ iim_err_msg(err_hold);
+
+ return 0;
+}
+
+int ads5121_fuse_stat(int bank)
+{
+ iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
+ u32 iim_fbac;
+ u32 err;
+
+ out_be32(&iim->err, in_be32(&iim->err));
+ if (bank == 0)
+ iim_fbac = in_be32(&iim->fbac0);
+ else
+ iim_fbac = in_be32(&iim->fbac1);
+ err = in_be32(&iim->err);
+ if (err)
+ iim_err_msg(err);
+ if (err & IIM_ERR_RPE || iim_fbac & IIM_FBAC_FBRP) {
+ if (iim_fbac == 0)
+ printf("Since protection settings can't be read - "
+ "try sensing fuse row 0;\n");
+ return 0;
+ }
+ if (iim_fbac & IIM_PROTECTION)
+ printf("Protection Fuses Bank %d = %#04x:\n", bank, iim_fbac);
+ else if (!(err & IIM_ERR_RPE))
+ printf("No Protection fuses are set\n");
+ if (iim_fbac & IIM_FBAC_FBWP)
+ printf("\tWrite Protect fuse is set\n");
+ if (iim_fbac & IIM_FBAC_FBOP)
+ printf("\tOverride Protect fuse is set\n");
+ if (iim_fbac & IIM_FBAC_FBESP)
+ printf("\tSense Protect Fuse is set\n");
+ out_be32(&iim->err, in_be32(&iim->err));
+
+ return 0;
+}
+
+int do_ads5121_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int frow, n, v, bank;
+
+ if (cur_bank == '0')
+ bank = 0;
+ else
+ bank = 1;
+
+ switch (argc) {
+ case 0:
+ case 1:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 2:
+ if (strncmp(argv[1], "stat", 4) == 0)
+ return ads5121_fuse_stat(bank);
+ if (strncmp(argv[1], "read", 4) == 0)
+ return ads5121_fuse_read(bank, 0, IIM_FMAX + 1);
+ if (strncmp(argv[1], "sense", 5) == 0)
+ return ads5121_fuse_sense(bank, 0, IIM_FMAX + 1);
+ if (strncmp(argv[1], "ovride", 6) == 0)
+ return ads5121_fuse_override(bank, IIM_FMAX + 1, 0);
+ if (strncmp(argv[1], "bank", 4) == 0) {
+ printf("Active Fuse Bank is %c\n", cur_bank);
+ return 0;
+ }
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 3:
+ if (strncmp(argv[1], "bank", 4) == 0) {
+ if (argv[2][0] == '0')
+ cur_bank = '0';
+ else if (argv[2][0] == '1')
+ cur_bank = '1';
+ else {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ printf("Setting Active Fuse Bank to %c\n", cur_bank);
+ return 0;
+ }
+ if (strncmp(argv[1], "prog", 4) == 0)
+ return ads5121_fuse_prog(cmdtp, bank, argv[2]);
+
+ frow = (int)simple_strtol(argv[2], NULL, 10);
+ if (frow == 0 && argv[2][0] != '0')
+ frow = -1;
+ if (!in_range(frow, 0, IIM_FMAX,
+ "<frow> must be between 0-31\n\n", cmdtp->usage))
+ return 1;
+ if (strncmp(argv[1], "read", 4) == 0)
+ return ads5121_fuse_read(bank, frow, 1);
+ if (strncmp(argv[1], "ovride", 6) == 0)
+ return ads5121_fuse_override(bank, frow, 0);
+ if (strncmp(argv[1], "sense", 5) == 0)
+ return ads5121_fuse_sense(bank, frow, 1);
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 4:
+ frow = (int)simple_strtol(argv[2], NULL, 10);
+ if (frow == 0 && argv[2][0] != '0')
+ frow = -1;
+ if (!in_range(frow, 0, IIM_FMAX,
+ "<frow> must be between 0-31\n\n", cmdtp->usage))
+ return 1;
+ if (strncmp(argv[1], "read", 4) == 0) {
+ n = (int)simple_strtol(argv[3], NULL, 10);
+ if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
+ "<frow>+<n> must be between 1-32\n\n",
+ cmdtp->usage))
+ return 1;
+ return ads5121_fuse_read(bank, frow, n);
+ }
+ if (strncmp(argv[1], "ovride", 6) == 0) {
+ v = (int)simple_strtol(argv[3], NULL, 10);
+ return ads5121_fuse_override(bank, frow, v);
+ }
+ if (strncmp(argv[1], "sense", 5) == 0) {
+ n = (int)simple_strtol(argv[3], NULL, 10);
+ if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
+ "<frow>+<n> must be between 1-32\n\n",
+ cmdtp->usage))
+ return 1;
+ return ads5121_fuse_sense(bank, frow, n);
+ }
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ default: /* at least 5 args */
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+}
+
+U_BOOT_CMD(
+ fuse, CONFIG_SYS_MAXARGS, 0, do_ads5121_fuse,
+ " - Read, Sense, Override or Program Fuses\n",
+ "bank <n> - sets active Fuse Bank to 0 or 1\n"
+ " no args shows current active bank\n"
+ "fuse stat - print active fuse bank's protection status\n"
+ "fuse read [<frow> [<n>]] - print <n> fuse rows starting at <frow>\n"
+ " no args to print entire bank's fuses\n"
+ "fuse ovride [<frow> [<v>]]- override fuses at <frow> with <v>\n"
+ " no <v> defaults to 0 for the row\n"
+ " no args resets entire bank to 0\n"
+ " NOTE - settings persist until hard reset\n"
+ "fuse sense [<frow>] - senses current fuse at <frow>\n"
+ " no args for entire bank\n"
+ "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n"
+ " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n"
+ " WARNING - this is permanent"
+);
+#endif /* CONFIG_CMD_FUSE */
--- /dev/null
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Derived from the MPC83xx code.
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
+
+ return 0;
+}
+
+/*
+ * Install and free an interrupt handler.
+ */
+void
+irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
+{
+}
+
+void irq_free_handler (int irq)
+{
+}
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+void iopin_initialize(iopin_t *ioregs_init, int len)
+{
+ short i, j, p;
+ u32 *reg;
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ reg = (u32 *)&(im->io_ctrl);
+
+ if (sizeof(ioregs_init) == 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or)
+ setbits_be32(reg + j, ioregs_init[i].val);
+ else
+ out_be32 (reg + j, ioregs_init[i].val);
+ }
+ }
+ return;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009-2010 DENX Software Engineering <wd@denx.de>
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
+
+static struct pci_controller pci_hose;
+
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile law512x_t *pci_law;
+ volatile pot512x_t *pci_pot;
+ volatile pcictrl512x_t *pci_ctrl;
+ volatile pciconf512x_t *pci_conf;
+ u16 reg16;
+ u32 reg32;
+ u32 dev;
+ int i;
+ struct pci_controller *hose;
+
+ /* Set PCI divider for 33MHz */
+ reg32 = in_be32(&im->clk.scfr[0]);
+ reg32 &= ~(SCFR1_PCI_DIV_MASK);
+ reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
+ out_be32(&im->clk.scfr[0], reg32);
+
+ clrsetbits_be32(&im->clk.scfr[0],
+ SCFR1_PCI_DIV_MASK,
+ SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT
+ );
+
+ pci_law = im->sysconf.pcilaw;
+ pci_pot = im->ios.pot;
+ pci_ctrl = &im->pci_ctrl;
+ pci_conf = &im->pci_conf;
+
+ hose = &pci_hose;
+
+ /*
+ * Release PCI RST Output signal
+ */
+ out_be32(&pci_ctrl->gcr, 0);
+ udelay(2000);
+ out_be32(&pci_ctrl->gcr, 1);
+
+ /* We need to wait at least a 1sec based on PCI specs */
+ for (i = 0; i < 1000; i++)
+ udelay(1000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR);
+ out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M);
+
+ out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR);
+ out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M);
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI mem space - prefetch */
+ out_be32(&pci_pot[0].potar,
+ (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK);
+ out_be32(&pci_pot[0].pobar,
+ (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK);
+ out_be32(&pci_pot[0].pocmr,
+ POCMR_EN | POCMR_PRE | POCMR_CM_256M);
+
+ /* PCI IO space */
+ out_be32(&pci_pot[1].potar,
+ (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK);
+ out_be32(&pci_pot[1].pobar,
+ (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK);
+ out_be32(&pci_pot[1].pocmr,
+ POCMR_EN | POCMR_IO | POCMR_CM_16M);
+
+ /* PCI mmio - non-prefetch mem space */
+ out_be32(&pci_pot[2].potar,
+ (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK);
+ out_be32(&pci_pot[2].pobar,
+ (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK);
+ out_be32(&pci_pot[2].pocmr,
+ POCMR_EN | POCMR_CM_256M);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ out_be32(&pci_ctrl[0].pitar1, 0x0);
+ out_be32(&pci_ctrl[0].pibar1, 0x0);
+ out_be32(&pci_ctrl[0].piebar1, 0x0);
+ out_be32(&pci_ctrl[0].piwar1,
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1));
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCI_MEM_BASE,
+ CONFIG_SYS_PCI_MEM_PHYS,
+ CONFIG_SYS_PCI_MEM_SIZE,
+ PCI_REGION_MEM|PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_SYS_PCI_MMIO_BASE,
+ CONFIG_SYS_PCI_MMIO_PHYS,
+ CONFIG_SYS_PCI_MMIO_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CONFIG_SYS_PCI_IO_BASE,
+ CONFIG_SYS_PCI_IO_PHYS,
+ CONFIG_SYS_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CONFIG_SYS_IMMR + 0x8300),
+ (CONFIG_SYS_IMMR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose.first_busno);
+ tmp[1] = cpu_to_be32(pci_hose.last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+ }
+}
+#endif /* CONFIG_OF_LIBFDT */
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based ont the MPC5200 PSC driver.
+ * Adapted for MPC512x by Jan Wrobel <wrr@semihalf.com>
+ */
+
+/*
+ * Minimal serial functions needed to use one of the PSC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PSC_CONSOLE)
+
+static void fifo_init (volatile psc512x_t *psc)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+
+ /* reset Rx & Tx fifo slice */
+ out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE);
+ out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE);
+
+ /* disable Tx & Rx FIFO interrupts */
+ out_be32(&psc->rfintmask, 0);
+ out_be32(&psc->tfintmask, 0);
+
+ out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16));
+ out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16));
+
+ /* enable Tx & Rx FIFO slice */
+ out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE);
+ out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE);
+
+ out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE);
+ __asm__ volatile ("sync");
+}
+
+void serial_setbrg(void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+ unsigned long baseclk, div;
+
+ /* calculate dividor for setting PSC CTUR and CTLR registers */
+ baseclk = (gd->ips_clk + 8) / 16;
+ div = (baseclk + (gd->baudrate / 2)) / gd->baudrate;
+
+ out_8(&psc->ctur, (div >> 8) & 0xff);
+ out_8(&psc->ctlr, div & 0xff); /* set baudrate */
+}
+
+int serial_init(void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ fifo_init (psc);
+
+ /* set MR register to point to MR1 */
+ out_8(&psc->command, PSC_SEL_MODE_REG_1);
+
+ /* disable Tx/Rx */
+ out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE);
+
+ /* choose the prescaler by 16 for the Tx/Rx clock generation */
+ out_be16(&psc->psc_clock_select, 0xdd00);
+
+ /* switch to UART mode */
+ out_be32(&psc->sicr, 0);
+
+ /* mode register points to mr1 */
+ /* configure parity, bit length and so on in mode register 1*/
+ out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
+ /* now, mode register points to mr2 */
+ out_8(&psc->mode, PSC_MODE_1_STOPBIT);
+
+ /* set baudrate */
+ serial_setbrg();
+
+ /* disable all interrupts */
+ out_be16(&psc->psc_imr, 0);
+
+ /* reset and enable Rx/Tx */
+ out_8(&psc->command, PSC_RST_RX);
+ out_8(&psc->command, PSC_RST_TX);
+ out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
+
+ return 0;
+}
+
+void serial_putc (const char c)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ if (c == '\n')
+ serial_putc ('\r');
+
+ /* Wait for last character to go. */
+ while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
+ ;
+
+ out_8(&psc->tfdata_8, c);
+}
+
+void serial_putc_raw (const char c)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ /* Wait for last character to go. */
+ while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
+ ;
+
+ out_8(&psc->tfdata_8, c);
+}
+
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ /* Wait for a character to arrive. */
+ while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY)
+ ;
+
+ return in_8(&psc->rfdata_8);
+}
+
+int serial_tstc (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY);
+}
+
+void serial_setrts(int s)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ if (s) {
+ /* Assert RTS (become LOW) */
+ out_8(&psc->op1, 0x1);
+ }
+ else {
+ /* Negate RTS (become HIGH) */
+ out_8(&psc->op0, 0x1);
+ }
+}
+
+int serial_getcts(void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+ return (in_8(&psc->ip) & 0x1) ? 0 : 1;
+}
+#endif /* CONFIG_PSC_CONSOLE */
--- /dev/null
+/*
+ * (C) Copyright 2000-2009
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on the MPC83xx code.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int spmf_mult[] = {
+ 68, 1, 12, 16,
+ 20, 24, 28, 32,
+ 36, 40, 44, 48,
+ 52, 56, 60, 64
+};
+
+static int cpmf_mult[][2] = {
+ {0, 1}, {0, 1}, /* 0 and 1 are not valid */
+ {1, 1}, {3, 2},
+ {2, 1}, {5, 2},
+ {3, 1}, {7, 2},
+ {0, 1}, {0, 1}, /* and all above 7 are not valid too */
+ {0, 1}, {0, 1},
+ {0, 1}, {0, 1},
+ {0, 1}, {0, 1}
+};
+
+static int sys_dividors[][2] = {
+ {2, 1}, {5, 2}, {3, 1}, {7, 2}, {4, 1},
+ {9, 2}, {5, 1}, {7, 1}, {6, 1}, {8, 1},
+ {9, 1}, {11, 1}, {10, 1}, {12, 1}, {13, 1},
+ {15, 1}, {14, 1}, {16, 1}, {17, 1}, {19, 1},
+ {18, 1}, {20, 1}, {21, 1}, {23, 1}, {22, 1},
+ {24, 1}, {25, 1}, {27, 1}, {26, 1}, {28, 1},
+ {29, 1}, {31, 1}, {30, 1}, {32, 1}, {33, 1}
+};
+
+int get_clocks (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u8 spmf;
+ u8 cpmf;
+ u8 sys_div;
+ u8 ips_div;
+ u8 pci_div;
+ u32 ref_clk = CONFIG_SYS_MPC512X_CLKIN;
+ u32 spll;
+ u32 sys_clk;
+ u32 core_clk;
+ u32 csb_clk;
+ u32 ips_clk;
+ u32 pci_clk;
+ u32 reg;
+
+ reg = in_be32(&im->sysconf.immrbar);
+ if ((reg & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ reg = in_be32(&im->clk.spmr);
+ spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
+ spll = ref_clk * spmf_mult[spmf];
+
+ reg = in_be32(&im->clk.scfr[1]);
+ sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT;
+ sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0];
+
+ csb_clk = sys_clk / 2;
+
+ reg = in_be32(&im->clk.spmr);
+ cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT;
+ core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1];
+
+ reg = in_be32(&im->clk.scfr[0]);
+ ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT;
+ if (ips_div != 0) {
+ ips_clk = csb_clk / ips_div;
+ } else {
+ /* in case we cannot get a sane IPS divisor, fail gracefully */
+ ips_clk = 0;
+ }
+
+ reg = in_be32(&im->clk.scfr[0]);
+ pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT;
+ if (pci_div != 0) {
+ pci_clk = csb_clk / pci_div;
+ } else {
+ /* in case we cannot get a sane IPS divisor, fail gracefully */
+ pci_clk = 333333;
+ }
+
+ gd->ips_clk = ips_clk;
+ gd->pci_clk = pci_clk;
+ gd->csb_clk = csb_clk;
+ gd->cpu_clk = core_clk;
+ gd->bus_clk = csb_clk;
+ return 0;
+
+}
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ return gd->csb_clk;
+}
+
+int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ char buf[32];
+
+ printf("Clock configuration:\n");
+ printf(" CPU: %-4s MHz\n", strmhz(buf, gd->cpu_clk));
+ printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+ printf(" IPS Bus: %-4s MHz\n", strmhz(buf, gd->ips_clk));
+ printf(" PCI: %-4s MHz\n", strmhz(buf, gd->pci_clk));
+ printf(" DDR: %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
+ return 0;
+}
+
+U_BOOT_CMD(clocks, 1, 0, do_clocks,
+ "print clock configuration",
+ " clocks"
+);
+
+int prt_mpc512x_clks (void)
+{
+ do_clocks (NULL, 0, 0, NULL);
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000-2009 Wolfgang Denk <wd@denx.de>
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on the MPC83xx code.
+ */
+
+/*
+ * U-Boot - Startup Code for MPC512x based Embedded Boards
+ */
+
+#include <config.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_521X 1 /* needed for Linux kernel header files*/
+
+#include <asm/immap_512x.h>
+#include "asm-offsets.h"
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING "MPC512X"
+#endif
+
+/*
+ * Floating Point enable, Machine Check and Recoverable Interr.
+ */
+#undef MSR_KERNEL
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/* Macros for manipulating CSx_START/STOP */
+#define START_REG(start) ((start) >> 16)
+#define STOP_REG(start, size) (((start) + (size) - 1) >> 16)
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * Magic number and version string
+ */
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii " ", CONFIG_IDENT_STRING, "\0"
+
+/*
+ * Vector Table
+ */
+ .text
+ . = EXC_OFF_SYS_RESET
+
+ .globl _start
+ /* Start from here after reset/power on */
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, UnknownException)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+/* Floating Point Unit unavailable exception */
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+/* Decrementer */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+/* Critical interrupt */
+ STD_EXCEPTION(0xa00, Critical, UnknownException)
+
+/* System Call */
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+/* Trace interrupt */
+ STD_EXCEPTION(0xd00, Trace, UnknownException)
+
+/* Performance Monitor interrupt */
+ STD_EXCEPTION(0xf00, PerfMon, UnknownException)
+
+/* Intruction Translation Miss */
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+
+/* Data Load Translation Miss */
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+
+/* Data Store Translation Miss */
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+
+/* Instruction Address Breakpoint */
+ STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException)
+
+/* System Management interrupt */
+ STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException)
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+boot_cold:
+ /* Save msr contents */
+ mfmsr r5
+
+ /* Set IMMR area to our preferred location */
+ lis r4, CONFIG_DEFAULT_IMMR@h
+ lis r3, CONFIG_SYS_IMMR@h
+ ori r3, r3, CONFIG_SYS_IMMR@l
+ stw r3, IMMRBAR(r4)
+ mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */
+
+ /* Initialise the machine */
+ bl cpu_early_init
+
+ /*
+ * Set up Local Access Windows:
+ *
+ * 1) Boot/CS0 (boot FLASH)
+ * 2) On-chip SRAM (initial stack purposes)
+ */
+
+ /* Boot CS/CS0 window range */
+ lis r3, CONFIG_SYS_IMMR@h
+ ori r3, r3, CONFIG_SYS_IMMR@l
+
+ lis r4, START_REG(CONFIG_SYS_FLASH_BASE)
+ ori r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)
+ stw r4, LPCS0AW(r3)
+
+ /*
+ * The SRAM window has a fixed size (256K), so only the start address
+ * is necessary
+ */
+ lis r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00
+ stw r4, SRAMBAR(r3)
+
+ /*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync
+ */
+ lwz r4, SRAMBAR(r3)
+ isync
+
+ /*
+ * Set configuration of the Boot/CS0, the SRAM window does not have a
+ * config register so no params can be set for it
+ */
+ lis r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h
+ ori r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l
+
+ lis r4, CONFIG_SYS_CS0_CFG@h
+ ori r4, r4, CONFIG_SYS_CS0_CFG@l
+ stw r4, CS0_CONFIG(r3)
+
+ /* Master enable all CS's */
+ lis r4, CS_CTRL_ME@h
+ ori r4, r4, CS_CTRL_ME@l
+ stw r4, CS_CTRL(r3)
+
+ lis r4, (CONFIG_SYS_MONITOR_BASE)@h
+ ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
+ addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r5
+ blr
+
+in_flash:
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable & stack humble */
+ /*------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ lis r3, CONFIG_SYS_IMMR@h
+ /* run low-level CPU init code (in Flash) */
+ bl cpu_init_f
+
+ /* r3: BOOTFLAG */
+ mr r3, r21
+ /* run 1st part of board init code (in Flash) */
+ bl board_init_f
+
+ /* NOTREACHED - board_init_f() does not return */
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/*
+ * This code initialises the machine, it expects original MSR contents to be in r5.
+ */
+cpu_early_init:
+ /* Initialize machine status; enable machine check interrupt */
+ /*-----------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */
+#endif
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */
+
+ lis r3, CONFIG_SYS_IMMR@h
+
+#if defined(CONFIG_WATCHDOG)
+ /* Initialise the watchdog and reset it */
+ /*--------------------------------------*/
+ lis r4, CONFIG_SYS_WATCHDOG_VALUE
+ ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+ stw r4, SWCRR(r3)
+
+ /* reset */
+ li r4, 0x556C
+ sth r4, SWSRR@l(r3)
+ li r4, 0x0
+ ori r4, r4, 0xAA39
+ sth r4, SWSRR@l(r3)
+#else
+ /* Disable the watchdog */
+ /*----------------------*/
+ lwz r4, SWCRR(r3)
+ /*
+ * Check to see if it's enabled for disabling: once disabled by s/w
+ * it's not possible to re-enable it
+ */
+ andi. r4, r4, 0x4
+ beq 1f
+ xor r4, r4, r4
+ stw r4, SWCRR(r3)
+1:
+#endif /* CONFIG_WATCHDOG */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*------------------------------------------------------*/
+ lis r3, CONFIG_SYS_HID0_INIT@h
+ ori r3, r3, CONFIG_SYS_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID0_FINAL@h
+ ori r3, r3, CONFIG_SYS_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID2@h
+ ori r3, r3, CONFIG_SYS_HID2@l
+ SYNC
+ mtspr HID2, r3
+ sync
+ blr
+
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ lis r4, 0
+ ori r4, r4, HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_DCE|HID0_DLOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_DCI
+ sync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*-------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
+ * + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* copy */
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+
+ addi r0,r5,3
+ srwi. r0,r0,2
+ mtctr r0
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* and compare */
+20: lwzu r20,4(r8)
+ lwzu r21,4(r7)
+ xor. r22, r20, r21
+ bne 30f
+ bdnz 20b
+ b 4f
+
+ /* compare failed */
+30: li r3, 0
+ blr
+
+2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_Trace - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Derived from the MPC83xx code.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware
+ * exceptions
+ */
+
+#include <common.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace (unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ puts ("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ putc ('\n');
+ printf ("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *) *sp;
+ }
+ putc ('\n');
+}
+
+void show_regs (struct pt_regs * regs)
+{
+ int i;
+
+ printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0,
+ regs->msr & MSR_IR ? 1 : 0,
+ regs->msr & MSR_DR ? 1 : 0);
+
+ putc ('\n');
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf ("GPR%02d: ", i);
+ }
+
+ printf ("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ putc ('\n');
+ }
+ }
+}
+
+
+void
+_exception (int signr, struct pt_regs *regs)
+{
+ show_regs (regs);
+ print_backtrace ((unsigned long *)regs->gpr[1]);
+ panic ("Exception at pc %lx signal %d", regs->nip,signr);
+}
+
+
+void
+MachineCheckException (struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ if ((fixup = search_exception_table (regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#ifdef CONFIG_CMD_KGDB
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ puts ("Machine check.\nCaused by (from msr): ");
+ printf ("regs %p ",regs);
+ switch (regs->msr & 0x00FF0000) {
+ case (0x80000000 >> 10):
+ puts ("Instruction cache parity signal\n");
+ break;
+ case (0x80000000 >> 11):
+ puts ("Data cache parity signal\n");
+ break;
+ case (0x80000000 >> 12):
+ puts ("Machine check signal\n");
+ break;
+ case (0x80000000 >> 13):
+ puts ("Transfer error ack signal\n");
+ break;
+ case (0x80000000 >> 14):
+ puts ("Data parity signal\n");
+ break;
+ case (0x80000000 >> 15):
+ puts ("Address parity signal\n");
+ break;
+ default:
+ puts ("Unknown values in msr\n");
+ }
+ show_regs (regs);
+ print_backtrace ((unsigned long *)regs->gpr[1]);
+
+ panic ("machine check");
+}
+
+void
+AlignmentException (struct pt_regs *regs)
+{
+#ifdef CONFIG_CMD_KGDB
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *)regs->gpr[1]);
+ panic ("Alignment Exception");
+}
+
+void
+ProgramCheckException (struct pt_regs *regs)
+{
+#ifdef CONFIG_CMD_KGDB
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *)regs->gpr[1]);
+ panic ("Program Check Exception");
+}
+
+void
+SoftEmuException (struct pt_regs *regs)
+{
+#ifdef CONFIG_CMD_KGDB
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *)regs->gpr[1]);
+ panic ("Software Emulation Exception");
+}
+
+
+void
+UnknownException (struct pt_regs *regs)
+{
+#ifdef CONFIG_CMD_KGDB
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception (0, regs);
+}
+
+#ifdef CONFIG_CMD_BEDBUG
+extern void do_bedbug_breakpoint (struct pt_regs *);
+#endif
+
+void
+DebugException (struct pt_regs *regs)
+{
+ printf ("Debugger trap at @ %lx\n", regs->nip );
+ show_regs (regs);
+#ifdef CONFIG_CMD_BEDBUG
+ do_bedbug_breakpoint (regs);
+#endif
+}
--- /dev/null
+/*
+ * (C) Copyright 2007 DENX Software Engineering.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc512x/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# File: arch/powerpc/cpu/mpc5xx/Makefile
+#
+# Discription: Makefile to build mpc5xx cpu configuration.
+# Will include top config.mk which itselfs
+# uses the definitions made in arch/powerpc/cpu/mpc5xx/config.mk
+#
+
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# File: config.mk
+#
+# Discription: compiler flags and make definitions
+#
+
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xx/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: cpu.c
+ *
+ * Discription: Some cpu specific function for watchdog,
+ * cpu version test, clock setting ...
+ *
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc5xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (defined(CONFIG_MPC555))
+# define ID_STR "MPC555/556"
+
+/*
+ * Check version of cpu with Processor Version Register (PVR)
+ */
+static int check_cpu_version (long clock, uint pvr, uint immr)
+{
+ char buf[32];
+ /* The highest 16 bits should be 0x0002 for a MPC555/556 */
+ if ((pvr >> 16) == 0x0002) {
+ printf (" " ID_STR " Version %x", (pvr >> 16));
+ printf (" at %s MHz:", strmhz (buf, clock));
+ } else {
+ printf ("Not supported cpu version");
+ return -1;
+ }
+ return 0;
+}
+#endif /* CONFIG_MPC555 */
+
+
+/*
+ * Check version of mpc5xx
+ */
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ uint pvr = get_pvr (); /* Retrieve PVR register */
+
+ puts ("CPU: ");
+
+ return check_cpu_version (clock, pvr, immr);
+}
+
+/*
+ * Called by macro WATCHDOG_RESET
+ */
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+
+/*
+ * Will clear software reset
+ */
+void reset_5xx_watchdog (volatile immap_t * immr)
+{
+ /* Use the MPC5xx Internal Watchdog */
+ immr->im_siu_conf.sc_swsr = 0x556c; /* Prevent SW time-out */
+ immr->im_siu_conf.sc_swsr = 0xaa39;
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+ volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
+ ulong oscclk, factor;
+
+ if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+ return (gd->cpu_clk / 16);
+ }
+
+ factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+
+ oscclk = gd->cpu_clk / factor;
+
+ if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ return (oscclk / 4);
+ }
+ return (oscclk / 16);
+}
+
+void dcache_enable (void)
+{
+ return;
+}
+
+void dcache_disable (void)
+{
+ return;
+}
+
+int dcache_status (void)
+{
+ return 0; /* always off */
+}
+
+/*
+ * Reset board
+ */
+int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_PATI)
+ volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
+ *addr = 1;
+#else
+ ulong addr;
+
+ /* Interrupts off, enable reset */
+ __asm__ volatile (" mtspr 81, %r0 \n\t"
+ " mfmsr %r3 \n\t"
+ " rlwinm %r31,%r3,0,25,23\n\t"
+ " mtmsr %r31 \n\t");
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*) (void)) addr) ();
+#endif /* #if defined(CONFIG_PATI) */
+ return 1;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: cpu_init.c
+ *
+ * Discription: Contains initialisation functions to setup
+ * the cpu properly
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <watchdog.h>
+
+/*
+ * Setup essential cpu registers to run
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+ volatile memctl5xx_t *memctl = &immr->im_memctl;
+ ulong reg;
+
+ /* SYPCR - contains watchdog control. This will enable watchdog */
+ /* if CONFIG_WATCHDOG is set */
+ immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+ reset_5xx_watchdog (immr);
+#endif
+
+ /* SIUMCR - contains debug pin configuration */
+ immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
+
+ /* Initialize timebase. Unlock TBSCRK */
+ immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+ immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
+
+ /* Full IMB bus speed */
+ immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
+
+ /* Time base and decrementer will be enables (TBE) */
+ /* in init_timebase() in time.c called from board_init_f(). */
+
+ /* Initialize the PIT. Unlock PISCRK */
+ immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+ immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+#if !defined(CONFIG_PATI)
+ /* PATI sest PLL in start.S */
+ /* PLL (CPU clock) settings */
+ immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+ /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+ * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+ * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
+ * field value.
+ */
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+ reg = CONFIG_SYS_PLPRCR; /* reset control bits */
+#else
+ reg = immr->im_clkrst.car_plprcr;
+ reg &= PLPRCR_MF_MSK; /* isolate MF field */
+ reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
+#endif
+ immr->im_clkrst.car_plprcr = reg;
+
+#endif /* !defined(CONFIG_PATI) */
+
+ /* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
+ immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+ reg = immr->im_clkrst.car_sccr;
+ reg &= SCCR_MASK;
+ reg |= CONFIG_SYS_SCCR;
+ immr->im_clkrst.car_sccr = reg;
+
+ /* Memory Controller */
+ memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+ memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+}
+
+/*
+ * Initialize higher level parts of cpu
+ */
+int cpu_init_r (void)
+{
+ /* Nothing to do at the moment */
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: interrupt.c
+ *
+ * Discription: Contains interrupt routines needed by U-Boot
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc5xx.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_PATI)
+/* PATI uses IRQs for PCI doorbell */
+#undef NR_IRQS
+#define NR_IRQS 16
+#endif
+
+struct interrupt_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ int count;
+};
+
+static struct interrupt_action irq_vecs[NR_IRQS];
+
+/*
+ * Initialise interrupts
+ */
+
+int interrupt_init_cpu (ulong *decrementer_count)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int vec;
+
+ /* Decrementer used here for status led */
+ *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
+
+ /* Disable all interrupts */
+ immr->im_siu_conf.sc_simask = 0;
+ for (vec=0; vec<NR_IRQS; vec++) {
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ irq_vecs[vec].count = 0;
+ }
+
+ return (0);
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int irq;
+ ulong simask, newmask;
+ ulong vec, v_bit;
+
+ /*
+ * read the SIVEC register and shift the bits down
+ * to get the irq number
+ */
+ vec = immr->im_siu_conf.sc_sivec;
+ irq = vec >> 26;
+ v_bit = 0x80000000UL >> irq;
+
+ /*
+ * Read Interrupt Mask Register and Mask Interrupts
+ */
+ simask = immr->im_siu_conf.sc_simask;
+ newmask = simask & (~(0xFFFF0000 >> irq));
+ immr->im_siu_conf.sc_simask = newmask;
+
+ if (!(irq & 0x1)) { /* External Interrupt ? */
+ ulong siel;
+
+ /*
+ * Read Interrupt Edge/Level Register
+ */
+ siel = immr->im_siu_conf.sc_siel;
+
+ if (siel & v_bit) { /* edge triggered interrupt ? */
+ /*
+ * Rewrite SIPEND Register to clear interrupt
+ */
+ immr->im_siu_conf.sc_sipend = v_bit;
+ }
+ }
+
+ if (irq_vecs[irq].handler != NULL) {
+ irq_vecs[irq].handler (irq_vecs[irq].arg);
+ } else {
+ printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
+ irq, vec);
+ /* turn off the bogus interrupt to avoid it from now */
+ simask &= ~v_bit;
+ }
+ /*
+ * Re-Enable old Interrupt Mask
+ */
+ immr->im_siu_conf.sc_simask = simask;
+}
+
+/*
+ * Install and free an interrupt handler
+ */
+void irq_install_handler (int vec, interrupt_handler_t * handler,
+ void *arg)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ /* SIU interrupt */
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("SIU interrupt %d 0x%x\n",
+ vec,
+ (uint) handler);
+ }
+ irq_vecs[vec].handler = handler;
+ irq_vecs[vec].arg = arg;
+ immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
+#if 0
+ printf ("Install SIU interrupt for vector %d ==> %p\n",
+ vec, handler);
+#endif
+}
+
+void irq_free_handler (int vec)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ /* SIU interrupt */
+#if 0
+ printf ("Free CPM interrupt for vector %d\n",
+ vec);
+#endif
+ immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+}
+
+/*
+ * Timer interrupt - gets called when bit 0 of DEC changes from
+ * 0. Decrementer is enabled with bit TBE in TBSCR.
+ */
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#if 0
+ printf ("*** Timer Interrupt *** ");
+#endif
+ /* Reset Timer Status Bit and Timers Interrupt Status */
+ immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+ __asm__ ("nop");
+ immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
+
+ return;
+}
+
+#if defined(CONFIG_CMD_IRQ)
+/*******************************************************************************
+ *
+ * irqinfo - print information about IRQs
+ *
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int vec;
+
+ printf ("\nInterrupt-Information:\n");
+ printf ("Nr Routine Arg Count\n");
+
+ for (vec=0; vec<NR_IRQS; vec++) {
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("%02d %08lx %08lx %d\n",
+ vec,
+ (ulong)irq_vecs[vec].handler,
+ (ulong)irq_vecs[vec].arg,
+ irq_vecs[vec].count);
+ }
+ }
+ return 0;
+}
+
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: serial.c
+ *
+ * Discription: Serial interface driver for SCI1 and SCI2.
+ * Since this code will be called from ROM use
+ * only non-static local variables.
+ *
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc5xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Local function prototypes
+ */
+
+static int ready_to_send(void);
+
+/*
+ * Minimal global serial functions needed to use one of the SCI modules.
+ */
+
+int serial_init (void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ serial_setbrg();
+
+#if defined(CONFIG_5xx_CONS_SCI1)
+ /* 10-Bit, 1 start bit, 8 data bit, no parity, 1 stop bit */
+ immr->im_qsmcm.qsmcm_scc1r1 = SCI_M_10;
+ immr->im_qsmcm.qsmcm_scc1r1 = SCI_TE | SCI_RE;
+#else
+ immr->im_qsmcm.qsmcm_scc2r1 = SCI_M_10;
+ immr->im_qsmcm.qsmcm_scc2r1 = SCI_TE | SCI_RE;
+#endif
+ return 0;
+}
+
+void serial_putc(const char c)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ /* Test for completition */
+ if(ready_to_send()) {
+#if defined(CONFIG_5xx_CONS_SCI1)
+ immr->im_qsmcm.qsmcm_sc1dr = (short)c;
+#else
+ immr->im_qsmcm.qsmcm_sc2dr = (short)c;
+#endif
+ if(c == '\n') {
+ if(ready_to_send());
+#if defined(CONFIG_5xx_CONS_SCI1)
+ immr->im_qsmcm.qsmcm_sc1dr = (short)'\r';
+#else
+ immr->im_qsmcm.qsmcm_sc2dr = (short)'\r';
+#endif
+ }
+ }
+}
+
+int serial_getc(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile short status;
+ unsigned char tmp;
+
+ /* New data ? */
+ do {
+#if defined(CONFIG_5xx_CONS_SCI1)
+ status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+ status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ reset_5xx_watchdog (immr);
+#endif
+ } while ((status & SCI_RDRF) == 0);
+
+ /* Read data */
+#if defined(CONFIG_5xx_CONS_SCI1)
+ tmp = (unsigned char)(immr->im_qsmcm.qsmcm_sc1dr & SCI_SCXDR_MK);
+#else
+ tmp = (unsigned char)( immr->im_qsmcm.qsmcm_sc2dr & SCI_SCXDR_MK);
+#endif
+ return tmp;
+}
+
+int serial_tstc()
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ short status;
+
+ /* New data character ? */
+#if defined(CONFIG_5xx_CONS_SCI1)
+ status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+ status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+ return (status & SCI_RDRF);
+}
+
+void serial_setbrg (void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ short scxbr;
+
+ /* Set baudrate */
+ scxbr = (gd->cpu_clk / (32 * gd->baudrate));
+#if defined(CONFIG_5xx_CONS_SCI1)
+ immr->im_qsmcm.qsmcm_scc1r0 = (scxbr & SCI_SCXBR_MK);
+#else
+ immr->im_qsmcm.qsmcm_scc2r0 = (scxbr & SCI_SCXBR_MK);
+#endif
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc(*s);
+ ++s;
+ }
+}
+
+int ready_to_send(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile short status;
+
+ do {
+#if defined(CONFIG_5xx_CONS_SCI1)
+ status = immr->im_qsmcm.qsmcm_sc1sr;
+#else
+ status = immr->im_qsmcm.qsmcm_sc2sr;
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ reset_5xx_watchdog (immr);
+#endif
+ } while ((status & SCI_TDRE) == 0);
+ return 1;
+
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: speed.c
+ *
+ * Discription: Provides cpu speed calculation
+ *
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Get cpu and bus clock
+ */
+int get_clocks (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#ifndef CONFIG_5xx_GCLK_FREQ
+ uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
+ uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
+ ulong vcoout;
+
+ vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
+ if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
+ gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
+ } else {
+ gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
+ }
+
+#else /* CONFIG_5xx_GCLK_FREQ */
+ gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
+#endif /* CONFIG_5xx_GCLK_FREQ */
+
+ if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
+ /* No Bus Divider active */
+ gd->bus_clk = gd->cpu_clk;
+ } else {
+ /* CLKOUT is GCLK / 2 */
+ gd->bus_clk = gd->cpu_clk / 2;
+ }
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ * <nboppuri@trinetcommunication.com>,
+ * <pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC5xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ * Ported to MPC5xx
+ * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/5xx_immap.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if defined(CONFIG_SPI)
+
+#undef DEBUG
+
+#define SPI_EEPROM_WREN 0x06
+#define SPI_EEPROM_RDSR 0x05
+#define SPI_EEPROM_READ 0x03
+#define SPI_EEPROM_WRITE 0x02
+
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+
+#endif /* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+
+void spi_init_f (void)
+{
+ int i;
+
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+ qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
+ qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
+
+ /* --------------------------------------------
+ * GPIO or per. Function
+ * PQSPAR[00] = 0 reserved
+ * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
+ * PQSPAR[02] = 0 [0x0000] -> GPIO
+ * PQSPAR[03] = 0 [0x0000] -> GPIO
+ * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
+ * PQSPAR[05] = 0 reseved
+ * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
+ * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
+ * -------------------------------------------- */
+ qsmcm->qsmcm_pqspar = 0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
+
+ /* --------------------------------------------
+ * DDRQS[00] = 0 reserved
+ * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
+ * DDRQS[02] = 0 [0x0000] -> GPIO Output
+ * DDRQS[03] = 0 [0x0000] -> GPIO Output
+ * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
+ * DDRQS[05] = 1 [0x0004] -> SPICLK Output
+ * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
+ * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
+ * -------------------------------------------- */
+ qsmcm->qsmcm_ddrqs = 0x7E;
+ /* --------------------------------------------
+ * Base state for used SPI CS pins, if base = 0 active must be 1
+ * PORTQS[00] = 0 reserved
+ * PORTQS[01] = 0 reserved
+ * PORTQS[02] = 0 reserved
+ * PORTQS[03] = 0 reserved
+ * PORTQS[04] = 0 [0x0000] RxD2
+ * PORTQS[05] = 1 [0x0400] TxD2
+ * PORTQS[06] = 0 [0x0000] RxD1
+ * PORTQS[07] = 1 [0x0100] TxD1
+ * PORTQS[08] = 0 reserved
+ * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
+ * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
+ * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
+ * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
+ * PORTQS[13] = 0 [0x0004] -> SPICLK Output
+ * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
+ * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
+ * -------------------------------------------- */
+ qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
+ /* --------------------------------------------
+ * Controll Register 0
+ * SPCR0[00] = 1 (0x8000) Master
+ * SPCR0[01] = 0 (0x0000) Wired-Or
+ * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
+ * SPCR0[06] = 0 (0x0000) Normal polarity
+ * SPCR0[07] = 0 (0x0000) Normal Clock Phase
+ * SPCR0[08..15] = 14 1.4MHz
+ */
+ qsmcm->qsmcm_spcr0=0xA00E;
+ /* --------------------------------------------
+ * Controll Register 1
+ * SPCR1[00] = 0 (0x0000) QSPI enabled
+ * SPCR1[1..7] = (0x7F00) Delay before Transfer
+ * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
+ */
+ qsmcm->qsmcm_spcr1=0x7F00;
+ /* --------------------------------------------
+ * Controll Register 2
+ * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
+ * SPCR2[01] = 0 (0x0000) No Wrap around
+ * SPCR2[02] = 0 (0x0000) Wrap to 0
+ * SPCR2[3..7] = (0x0000) End Queue pointer = 0
+ * SPCR2[8..10] = 0 (0x0000) reserved
+ * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
+ */
+ qsmcm->qsmcm_spcr2=0x0000;
+ /* --------------------------------------------
+ * Controll Register 3
+ * SPCR3[00..04] = 0 (0x0000) reserved
+ * SPCR3[05] = 0 (0x0000) Feedback disabled
+ * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
+ * SPCR3[07] = 0 (0x0000) Not halted
+ */
+ qsmcm->qsmcm_spcr3=0x00;
+ /* --------------------------------------------
+ * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
+ * SPCR3[08] = 1 (0x80) QSPI finished
+ * SPCR3[09] = 1 (0x40) Mode Fault Flag
+ * SPCR3[10] = 1 (0x20) HALTA
+ * SPCR3[11..15] = 0 (0x0000) Last executed command
+ */
+ qsmcm->qsmcm_spsr=0xE0;
+ /*-------------------------------------------
+ * Setup RAM
+ */
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ return;
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ * Dummy, all initializations have been done in spi_init_r
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+ return;
+
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i,dlen;
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */
+ spi_xfer(1);
+ i=0;
+ qsmcm->qsmcm_tranram[i++] = SPI_EEPROM_WRITE; /* WRITE memory array */
+ qsmcm->qsmcm_tranram[i++] = addr[0];
+ qsmcm->qsmcm_tranram[i++] = addr[1];
+
+ for(dlen=0;dlen<len;dlen++) {
+ qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
+ }
+ /* transmit it */
+ spi_xfer(i+dlen);
+ /* ignore received data */
+ for (i = 0; i < 1000; i++) {
+ qsmcm->qsmcm_tranram[0] = SPI_EEPROM_RDSR; /* read status */
+ qsmcm->qsmcm_tranram[1] = 0;
+ spi_xfer(2);
+ if (!(qsmcm->qsmcm_recram[1] & 1)) {
+ break;
+ }
+ udelay(1000);
+ }
+ if (i >= 1000) {
+ printf ("*** spi_write: Time out while writing!\n");
+ }
+ return len;
+}
+
+#define TRANSFER_LEN 16
+
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int index,i,newlen;
+ uchar newaddr[2];
+ int curraddr;
+
+ curraddr=(addr[alen-2]<<8)+addr[alen-1];
+ i=len;
+ index=0;
+ do {
+ newaddr[1]=(curraddr & 0xff);
+ newaddr[0]=((curraddr>>8) & 0xff);
+ if(i>TRANSFER_LEN) {
+ newlen=TRANSFER_LEN;
+ i-=TRANSFER_LEN;
+ }
+ else {
+ newlen=i;
+ i=0;
+ }
+ short_spi_write (newaddr, 2, &buffer[index], newlen);
+ index+=newlen;
+ curraddr+=newlen;
+ }while(i);
+ return (len);
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ i=0;
+ qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
+ qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
+ qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
+ spi_xfer(3 + len);
+ for(i=0;i<len;i++) {
+ *buffer++=(char)qsmcm->qsmcm_recram[i+3];
+ }
+ return len;
+}
+
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int index,i,newlen;
+ uchar newaddr[2];
+ int curraddr;
+
+ curraddr=(addr[alen-2]<<8)+addr[alen-1];
+ i=len;
+ index=0;
+ do {
+ newaddr[1]=(curraddr & 0xff);
+ newaddr[0]=((curraddr>>8) & 0xff);
+ if(i>TRANSFER_LEN) {
+ newlen=TRANSFER_LEN;
+ i-=TRANSFER_LEN;
+ }
+ else {
+ newlen=i;
+ i=0;
+ }
+ short_spi_read (newaddr, 2, &buffer[index], newlen);
+ index+=newlen;
+ curraddr+=newlen;
+ }while(i);
+ return (len);
+}
+
+/****************************************************************************
+ * Function: spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+ int i;
+ int tm;
+ ushort status;
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+ DPRINT (("*** spi_xfer entered count %d***\n",count));
+
+ /* Set CS for device */
+ for(i=0;i<(count-1);i++)
+ qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+
+ qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+ qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
+
+ DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
+
+ qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
+
+ /* start spi transfer */
+ DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+ qsmcm->qsmcm_spcr1 |= 0x8000; /* Start transmit */
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * -------------------------------- */
+ for (tm=0; tm<1000; ++tm) {
+ status=qsmcm->qsmcm_spcr1;
+ if((status & 0x8000)==0)
+ break;
+ udelay (1000);
+ }
+ if (tm >= 1000) {
+ printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+ }
+#ifdef DEBUG
+ printf ("\nspi_xfer: txbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_tranram, 32); /* dump of txbuf before transmit */
+ printf ("spi_xfer: rxbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_recram, 32); /* dump of rxbuf after transmit */
+ printf ("\nspi_xfer: commbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_comdram, 32); /* dump of txbuf before transmit */
+ printf ("\n");
+#endif
+
+ return count;
+}
+
+#endif /* CONFIG_SPI */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001, 2002 Wolfgang Denk <wd@denx.de>
+ * Copyright (C) 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * File: start.S
+ *
+ * Discription: startup code
+ *
+ */
+
+#include <config.h>
+#include <mpc5xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_5xx 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't have a MMU.
+*/
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ mfspr r3, 638
+ li r4, CONFIG_SYS_ISB /* Set ISB bit */
+ or r3, r3, r4
+ mtspr 638, r3
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x20
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+boot_warm:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*----------------------------------------------------------------------*/
+ li r3, MSR_KERNEL /* Set ME, RI flags */
+ mtmsr r3
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ /* Initialize debug port registers */
+ /*----------------------------------------------------------------------*/
+ xor r0, r0, r0 /* Clear R0 */
+ mtspr LCTRL1, r0 /* Initialize debug port regs */
+ mtspr LCTRL2, r0
+ mtspr COUNTA, r0
+ mtspr COUNTB, r0
+
+#if defined(CONFIG_PATI)
+ /* the external flash access on PATI fails if programming the PLL to 40MHz.
+ * Copy the PLL programming code to the internal RAM and execute it
+ *----------------------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+ lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
+ mtlr r4
+ addis r5,0,0x0
+ ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+ mtctr r5
+ addi r3, r3, -4
+ addi r4, r4, -4
+0:
+ lwzu r0,4(r3)
+ stwu r0,4(r4)
+ bdnz 0b /* copy loop */
+ blrl
+#endif
+
+ /*
+ * Calculate absolute address in FLASH and jump there
+ *----------------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+
+ /* Initialize some SPRs that are hard to access from C */
+ /*----------------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_IMMR@h /* Pass IMMR as arg1 to C routine */
+ lis r2, CONFIG_SYS_INIT_SP_ADDR@h
+ ori r1, r2, CONFIG_SYS_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
+ /* Note: R0 is still 0 here */
+ stwu r0, -4(r1) /* Clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /*
+ * Disable serialized ifetch and show cycles
+ * (i.e. set processor to normal mode) for maximum
+ * performance.
+ */
+
+ li r2, 0x0007
+ mtspr ICTRL, r2
+
+ /* Set up debug mode entry */
+
+ lis r2, CONFIG_SYS_DER@h
+ ori r2, r2, CONFIG_SYS_DER@l
+ mtspr DER, r2
+
+ /* Let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*----------------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (from Flash) */
+
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* FPU on MPC5xx available. We will use it later.
+ */
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ /* On the MPC8xx, this is a software emulation interrupt. It occurs
+ * for all unimplemented and illegal instructions.
+ */
+ STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = 0x2000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+
+/*
+ * unsigned int get_immr (unsigned int mask)
+ *
+ * return (mask ? (IMMR & mask) : IMMR);
+ */
+ .globl get_immr
+get_immr:
+ mr r4,r3 /* save mask */
+ mfspr r3, IMMR /* IMMR */
+ cmpwi 0,r4,0 /* mask != 0 ? */
+ beq 4f
+ and r3,r3,r4 /* IMMR & mask */
+4:
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer in SRAM */
+ mr r9, r4 /* Save copy of global data pointer in SRAM */
+ mr r10, r5 /* Save copy of monitor destination Address in SRAM */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* the the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 4f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+4: sync
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mtlr r4 /* restore link register */
+ blr
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
+ lis r3, (0x55ccaa33)@h
+ ori r3, r3, (0x55ccaa33)@l
+ stw r3, 0(r4)
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+ lis r3, CONFIG_SYS_PLPRCR@h
+ ori r3, r3, CONFIG_SYS_PLPRCR@l
+ stw r3, 0(r4)
+ addis r3,0,0x0
+ ori r3,r3,0xA000
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+ blr
+pll_prog_code_end:
+ nop
+ blr
+#endif
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x0001000
+
+
+/*
+ * Print stack backtrace
+ */
+void print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+/*
+ * Print current registers
+ */
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+/*
+ * General exception handler routine
+ */
+void _exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+/*
+ * Machine check exception handler routine
+ */
+void MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ printf("Machine check signal\n");
+ break;
+ case (0x80000000>>13):
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+/*
+ * Alignment exception handler routine
+ */
+void AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+/*
+ * Program check exception handler routine
+ */
+void ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+/*
+ * Software emulation exception handler routine
+ */
+void SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+/*
+ * Unknown exception handler routine
+ */
+void UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+/*
+ * Debug exception handler routine
+ */
+void DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
--- /dev/null
+/*
+ * (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ arch/powerpc/cpu/mpc5xx/start.o (.text)
+
+ *(.text)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+/* . = env_start;
+ .ppcenv :
+ {
+ common/env_embedded.o (.ppcenv)
+ }
+*/
+}
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+SOBJS = io.o firmware_sc_task_bestcomm.impl.o
+COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
+ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \
+ -mstring -mcpu=603e -mmultiple
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2000-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC5xxx CPUs
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <net.h>
+#include <mpc5xxx.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
+#if defined(CONFIG_OF_IDE_FIXUP)
+#include <ide.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+ uint svr, pvr;
+
+ puts ("CPU: ");
+
+ svr = get_svr();
+ pvr = get_pvr();
+
+ switch (pvr) {
+ case PVR_5200:
+ printf("MPC5200");
+ break;
+ case PVR_5200B:
+ printf("MPC5200B");
+ break;
+ default:
+ printf("Unknown MPC5xxx");
+ break;
+ }
+
+ printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
+ PVR_MAJ(pvr), PVR_MIN(pvr));
+ printf (" at %s MHz\n", strmhz (buf, clock));
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr;
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /* Charge the watchdog timer */
+ *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0x0001000f;
+ *(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */
+ while(1);
+
+ return 1;
+
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return (tbclk);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4;
+ char * cpu_path = "/cpus/" OF_CPU;
+#ifdef CONFIG_MPC5xxx_FEC
+ uchar enetaddr[6];
+ char * eth_path = "/" OF_SOC "/ethernet@3000";
+#endif
+
+ do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
+ do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
+ do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency",
+ bd->bi_busfreq*div, 1);
+#ifdef CONFIG_MPC5xxx_FEC
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ do_fixup_by_path(blob, eth_path, "mac-address", enetaddr, 6, 0);
+ do_fixup_by_path(blob, eth_path, "local-mac-address", enetaddr, 6, 0);
+#endif
+#if defined(CONFIG_OF_IDE_FIXUP)
+ if (!ide_device_present(0)) {
+ /* NO CF card detected -> delete ata node in DTS */
+ int nodeoffset = 0;
+ char nodename[] = "/soc5200@f0000000/ata@3a00";
+
+ nodeoffset = fdt_path_offset(blob, nodename);
+ if (nodeoffset >= 0) {
+ fdt_del_node(blob, nodeoffset);
+ } else {
+ printf("%s: cannot find %s node err:%s\n",
+ __func__, nodename, fdt_strerror(nodeoffset));
+ }
+ }
+
+#endif
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
+
+ *save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | a;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
+
+ if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+ return 0;
+ else
+ return (*save_addr & 0x0000ffff);
+}
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
+
+#ifdef CONFIG_MPC5xxx_FEC
+/* Default initializations for FEC controllers. To override,
+ * create a board-specific function called:
+ * int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+ return mpc5xxx_fec_initialize(bis);
+}
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+ reset_5xxx_watchdog();
+ if (re_enable) enable_interrupts();
+}
+
+void reset_5xxx_watchdog(void)
+{
+ volatile struct mpc5xxx_gpt *gpt0 =
+ (struct mpc5xxx_gpt *) MPC5XXX_GPT;
+
+ /* Trigger TIMER_0 by writing A5 to OCPW */
+ clrsetbits_be32(&gpt0->emsr, 0xff000000, 0xa5000000);
+}
+#endif /* CONFIG_WATCHDOG */
--- /dev/null
+/*
+ * (C) Copyright 2000-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <asm/io.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ */
+void cpu_init_f (void)
+{
+ volatile struct mpc5xxx_mmap_ctl *mm =
+ (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
+ volatile struct mpc5xxx_lpb *lpb =
+ (struct mpc5xxx_lpb *) MPC5XXX_LPB;
+ volatile struct mpc5xxx_gpio *gpio =
+ (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
+ volatile struct mpc5xxx_xlb *xlb =
+ (struct mpc5xxx_xlb *) MPC5XXX_XLBARB;
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+ volatile struct mpc5xxx_cdm *cdm =
+ (struct mpc5xxx_cdm *) MPC5XXX_CDM;
+#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
+#if defined(CONFIG_WATCHDOG)
+ volatile struct mpc5xxx_gpt *gpt0 =
+ (struct mpc5xxx_gpt *) MPC5XXX_GPT;
+#endif /* CONFIG_WATCHDOG */
+ unsigned long addecr = (1 << 25); /* Boot_CS */
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /*
+ * Memory Controller: configure chip selects and enable them
+ */
+#if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE)
+ out_be32(&mm->boot_start, START_REG(CONFIG_SYS_BOOTCS_START));
+ out_be32(&mm->boot_stop, STOP_REG(CONFIG_SYS_BOOTCS_START,
+ CONFIG_SYS_BOOTCS_SIZE));
+#endif
+#if defined(CONFIG_SYS_BOOTCS_CFG)
+ out_be32(&lpb->cs0_cfg, CONFIG_SYS_BOOTCS_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE)
+ out_be32(&mm->cs0_start, START_REG(CONFIG_SYS_CS0_START));
+ out_be32(&mm->cs0_stop, STOP_REG(CONFIG_SYS_CS0_START,
+ CONFIG_SYS_CS0_SIZE));
+ /* CS0 and BOOT_CS cannot be enabled at once. */
+ /* addecr |= (1 << 16); */
+#endif
+#if defined(CONFIG_SYS_CS0_CFG)
+ out_be32(&lpb->cs0_cfg, CONFIG_SYS_CS0_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE)
+ out_be32(&mm->cs1_start, START_REG(CONFIG_SYS_CS1_START));
+ out_be32(&mm->cs1_stop, STOP_REG(CONFIG_SYS_CS1_START,
+ CONFIG_SYS_CS1_SIZE));
+ addecr |= (1 << 17);
+#endif
+#if defined(CONFIG_SYS_CS1_CFG)
+ out_be32(&lpb->cs1_cfg, CONFIG_SYS_CS1_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE)
+ out_be32(&mm->cs2_start, START_REG(CONFIG_SYS_CS2_START));
+ out_be32(&mm->cs2_stop, STOP_REG(CONFIG_SYS_CS2_START,
+ CONFIG_SYS_CS2_SIZE));
+ addecr |= (1 << 18);
+#endif
+#if defined(CONFIG_SYS_CS2_CFG)
+ out_be32(&lpb->cs2_cfg, CONFIG_SYS_CS2_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE)
+ out_be32(&mm->cs3_start, START_REG(CONFIG_SYS_CS3_START));
+ out_be32(&mm->cs3_stop, STOP_REG(CONFIG_SYS_CS3_START,
+ CONFIG_SYS_CS3_SIZE));
+ addecr |= (1 << 19);
+#endif
+#if defined(CONFIG_SYS_CS3_CFG)
+ out_be32(&lpb->cs3_cfg, CONFIG_SYS_CS3_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE)
+ out_be32(&mm->cs4_start, START_REG(CONFIG_SYS_CS4_START));
+ out_be32(&mm->cs4_stop, STOP_REG(CONFIG_SYS_CS4_START,
+ CONFIG_SYS_CS4_SIZE));
+ addecr |= (1 << 20);
+#endif
+#if defined(CONFIG_SYS_CS4_CFG)
+ out_be32(&lpb->cs4_cfg, CONFIG_SYS_CS4_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE)
+ out_be32(&mm->cs5_start, START_REG(CONFIG_SYS_CS5_START));
+ out_be32(&mm->cs5_stop, STOP_REG(CONFIG_SYS_CS5_START,
+ CONFIG_SYS_CS5_SIZE));
+ addecr |= (1 << 21);
+#endif
+#if defined(CONFIG_SYS_CS5_CFG)
+ out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
+#endif
+
+ addecr |= 1;
+#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
+ out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
+ out_be32(&mm->cs6_stop, STOP_REG(CONFIG_SYS_CS6_START,
+ CONFIG_SYS_CS6_SIZE));
+ addecr |= (1 << 26);
+#endif
+#if defined(CONFIG_SYS_CS6_CFG)
+ out_be32(&lpb->cs6_cfg, CONFIG_SYS_CS6_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE)
+ out_be32(&mm->cs7_start, START_REG(CONFIG_SYS_CS7_START));
+ out_be32(&mm->cs7_stop, STOP_REG(CONFIG_SYS_CS7_START,
+ CONFIG_SYS_CS7_SIZE));
+ addecr |= (1 << 27);
+#endif
+#if defined(CONFIG_SYS_CS7_CFG)
+ out_be32(&lpb->cs7_cfg, CONFIG_SYS_CS7_CFG);
+#endif
+
+#if defined(CONFIG_SYS_CS_BURST)
+ out_be32(&lpb->cs_burst, CONFIG_SYS_CS_BURST);
+#endif
+#if defined(CONFIG_SYS_CS_DEADCYCLE)
+ out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
+#endif
+
+ /* Enable chip selects */
+ out_be32(&mm->ipbi_ws_ctrl, addecr);
+ out_be32(&lpb->cs_ctrl, (1 << 24));
+
+ /* Setup pin multiplexing */
+#if defined(CONFIG_SYS_GPS_PORT_CONFIG)
+ out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
+#endif
+
+ /* enable timebase */
+ setbits_be32(&xlb->config, (1 << 13));
+
+ /* Enable snooping for RAM */
+ setbits_be32(&xlb->config, (1 << 15));
+ out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
+
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+ /* Motorola reports IPB should better run at 133 MHz. */
+ setbits_be32(&mm->ipbi_ws_ctrl, 1);
+ /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
+ addecr = in_be32(&cdm->cfg);
+ addecr &= ~0x103;
+# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
+ /* pci_clk_sel = 0x01 -> IPB_CLK/2 */
+ addecr |= 0x01;
+# else
+ /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
+ addecr |= 0x02;
+# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
+ out_be32(&cdm->cfg, addecr);
+#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
+ /* Configure the XLB Arbiter */
+ out_be32(&xlb->master_pri_enable, 0xff);
+ out_be32(&xlb->master_priority, 0x11111111);
+
+#if defined(CONFIG_SYS_XLB_PIPELINING)
+ /* Enable piplining */
+ clrbits_be32(&xlb->config, (1 << 31));
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ /* Charge the watchdog timer - prescaler = 64k, count = 64k*/
+ out_be32(&gpt0->cir, 0x0000ffff);
+ out_be32(&gpt0->emsr, 0x9004); /* wden|ce|timer_ms */
+
+ reset_5xxx_watchdog();
+#endif /* CONFIG_WATCHDOG */
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+ volatile struct mpc5xxx_intr *intr =
+ (struct mpc5xxx_intr *) MPC5XXX_ICTL;
+
+ /* mask all interrupts */
+ out_be32(&intr->per_mask, 0xffffff00);
+ setbits_be32(&intr->main_mask, 0x0001ffff);
+ clrbits_be32(&intr->ctrl, 0x00000f00);
+ /* route critical ints to normal ints */
+ setbits_be32(&intr->ctrl, 0x00000001);
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC5xxx_FEC)
+ /* load FEC microcode */
+ loadtask(0, 2);
+#endif
+
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (C) 2001, Software Center, Motorola China.
+ *
+ * This file contains microcode for the FEC controller of the MPC5200 CPU.
+ */
+
+#include <config.h>
+
+/* sas/sccg, gas target */
+.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
+.section smartdmaTaskTable,"aw",@progbits /* Task tables */
+.align 9
+.globl taskTable
+taskTable:
+.globl scEthernetRecv_Entry
+scEthernetRecv_Entry: /* Task 0 */
+.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
+.long scEthernetRecv_TDT - taskTable + 0x000000a4
+.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
+.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
+.long 0x00000000
+.long 0x00000000
+.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
+.long CONFIG_SYS_MBAR
+.globl scEthernetXmit_Entry
+scEthernetXmit_Entry: /* Task 1 */
+.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
+.long scEthernetXmit_TDT - taskTable + 0x000000d0
+.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
+.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
+.long 0x00000000
+.long 0x00000000
+.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
+.long CONFIG_SYS_MBAR
+
+
+.globl scEthernetRecv_TDT
+scEthernetRecv_TDT: /* Task 0 Descriptor Table */
+.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
+.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */
+.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
+.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
+.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x010cf04c /* 0020: DRD2B1: var4 = EU3(); EU3(var1,var12) */
+.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
+.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
+.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x018cf04e /* 0030: DRD2B1: var6 = EU3(); EU3(var1,var14) */
+.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x020cf04f /* 0038: DRD2B1: var8 = EU3(); EU3(var1,var15) */
+.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
+.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */
+.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
+.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */
+.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
+.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */
+.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
+.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
+.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */
+.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
+.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
+.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
+.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
+.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
+.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
+.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
+.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
+.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
+.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
+.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x080cf04c /* 00A0: DRD2B1: idx0 = EU3(); EU3(var1,var12) */
+.long 0x000001f8 /* 00A4(:0): NOP */
+
+
+.globl scEthernetXmit_TDT
+scEthernetXmit_TDT: /* Task 1 Descriptor Table */
+.long 0x80024800 /* 0000: LCDEXT: idx0 = 0xf0008800; ; */
+.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
+.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
+.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
+.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x024cf04d /* 0020: DRD2B1: var9 = EU3(); EU3(var1,var13) */
+.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
+.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */
+.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
+.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x010cf04e /* 0034: DRD2B1: var4 = EU3(); EU3(var1,var14) */
+.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x014cf04f /* 003C: DRD2B1: var5 = EU3(); EU3(var1,var15) */
+.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x028cf050 /* 0044: DRD2B1: var10 = EU3(); EU3(var1,var16) */
+.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x018cf051 /* 004C: DRD2B1: var6 = EU3(); EU3(var1,var17) */
+.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x01ccf0a1 /* 0058: DRD2B1: var7 = EU3(); EU3(var2,idx1) */
+.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
+.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
+.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
+.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */
+.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
+.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
+.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */
+.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
+.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
+.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
+.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x60000001 /* 0088: DRD2A: EU0=0 EU1=0 EU2=0 EU3=1 EXT init=0 WS=0 RS=0 */
+.long 0x0c4cfc4d /* 008C: DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
+.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
+.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
+.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
+.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
+.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
+.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
+.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
+.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
+.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x080cf04d /* 00CC: DRD2B1: idx0 = EU3(); EU3(var1,var13) */
+.long 0x000001f8 /* 00D0(:0): NOP */
+
+.align 8
+
+.globl scEthernetRecv_VarTab
+scEthernetRecv_VarTab: /* Task 0 Variable Table */
+.long 0x00000000 /* var[0] */
+.long 0x00000000 /* var[1] */
+.long 0x00000000 /* var[2] */
+.long 0x00000000 /* var[3] */
+.long 0x00000000 /* var[4] */
+.long 0x00000000 /* var[5] */
+.long 0x00000000 /* var[6] */
+.long 0x00000000 /* var[7] */
+.long 0x00000000 /* var[8] */
+.long (CONFIG_SYS_MBAR + 0x8800) /* var[9] */
+.long 0x00000008 /* var[10] */
+.long 0x0000000c /* var[11] */
+.long 0x80000000 /* var[12] */
+.long 0x00000000 /* var[13] */
+.long 0x10000000 /* var[14] */
+.long 0x20000000 /* var[15] */
+.long 0x000005e4 /* var[16] */
+.long 0x0000000e /* var[17] */
+.long 0x000005e0 /* var[18] */
+.long 0x00000004 /* var[19] */
+.long 0x00000000 /* var[20] */
+.long 0x00000000 /* var[21] */
+.long 0x00000000 /* var[22] */
+.long 0x00000000 /* var[23] */
+.long 0x00000000 /* inc[0] */
+.long 0x60000000 /* inc[1] */
+.long 0x20000001 /* inc[2] */
+.long 0x80000000 /* inc[3] */
+.long 0x40000000 /* inc[4] */
+.long 0x00000000 /* inc[5] */
+.long 0x00000000 /* inc[6] */
+.long 0x00000000 /* inc[7] */
+
+.align 8
+
+.globl scEthernetXmit_VarTab
+scEthernetXmit_VarTab: /* Task 1 Variable Table */
+.long 0x00000000 /* var[0] */
+.long 0x00000000 /* var[1] */
+.long 0x00000000 /* var[2] */
+.long 0x00000000 /* var[3] */
+.long 0x00000000 /* var[4] */
+.long 0x00000000 /* var[5] */
+.long 0x00000000 /* var[6] */
+.long 0x00000000 /* var[7] */
+.long 0x00000000 /* var[8] */
+.long 0x00000000 /* var[9] */
+.long 0x00000000 /* var[10] */
+.long (CONFIG_SYS_MBAR + 0x8800) /* var[11] */
+.long 0x00000000 /* var[12] */
+.long 0x80000000 /* var[13] */
+.long 0x10000000 /* var[14] */
+.long 0x08000000 /* var[15] */
+.long 0x20000000 /* var[16] */
+.long 0x0000ffff /* var[17] */
+.long 0xffffffff /* var[18] */
+.long 0x00000008 /* var[19] */
+.long 0x00000000 /* var[20] */
+.long 0x00000000 /* var[21] */
+.long 0x00000000 /* var[22] */
+.long 0x00000000 /* var[23] */
+.long 0x00000000 /* inc[0] */
+.long 0x60000000 /* inc[1] */
+.long 0x40000000 /* inc[2] */
+.long 0x4000ffff /* inc[3] */
+.long 0xe0000001 /* inc[4] */
+.long 0x80000000 /* inc[5] */
+.long 0x00000000 /* inc[6] */
+.long 0x00000000 /* inc[7] */
+
+.align 8
+
+.globl scEthernetRecv_FDT
+scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x21800000 /* and(), EU# 3 */
+.long 0x21400000 /* andn(), EU# 3 */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+
+.align 8
+
+.globl scEthernetXmit_FDT
+scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x21800000 /* and(), EU# 3 */
+.long 0x21400000 /* andn(), EU# 3 */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+
+
+.globl scEthernetRecv_CSave
+scEthernetRecv_CSave: /* Task 0 context save space */
+.space 128, 0x0
+
+
+.globl scEthernetXmit_CSave
+scEthernetXmit_CSave: /* Task 1 context save space */
+.space 128, 0x0
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HARD_I2C
+
+#include <mpc5xxx.h>
+#include <i2c.h>
+
+#if (CONFIG_SYS_I2C_MODULE == 2)
+#define I2C_BASE MPC5XXX_I2C2
+#elif (CONFIG_SYS_I2C_MODULE == 1)
+#define I2C_BASE MPC5XXX_I2C1
+#else
+#error CONFIG_SYS_I2C_MODULE is not properly configured
+#endif
+
+#define I2C_TIMEOUT 6667
+#define I2C_RETRIES 3
+
+struct mpc5xxx_i2c_tap {
+ int scl2tap;
+ int tap2tap;
+};
+
+static int mpc_reg_in (volatile u32 *reg);
+static void mpc_reg_out (volatile u32 *reg, int val, int mask);
+static int wait_for_bb (void);
+static int wait_for_pin (int *status);
+static int do_address (uchar chip, char rdwr_flag);
+static int send_bytes (uchar chip, char *buf, int len);
+static int receive_bytes (uchar chip, char *buf, int len);
+static int mpc_get_fdr (int);
+
+static int mpc_reg_in(volatile u32 *reg)
+{
+ int ret = *reg >> 24;
+ __asm__ __volatile__ ("eieio");
+ return ret;
+}
+
+static void mpc_reg_out(volatile u32 *reg, int val, int mask)
+{
+ int tmp;
+
+ if (!mask) {
+ *reg = val << 24;
+ } else {
+ tmp = mpc_reg_in(reg);
+ *reg = ((tmp & ~mask) | (val & mask)) << 24;
+ }
+ __asm__ __volatile__ ("eieio");
+
+ return;
+}
+
+static int wait_for_bb(void)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int timeout = I2C_TIMEOUT;
+ int status;
+
+ status = mpc_reg_in(®s->msr);
+
+ while (timeout-- && (status & I2C_BB)) {
+#if 1
+ volatile int temp;
+ mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
+ temp = mpc_reg_in(®s->mdr);
+ mpc_reg_out(®s->mcr, 0, I2C_STA);
+ mpc_reg_out(®s->mcr, 0, 0);
+ mpc_reg_out(®s->mcr, I2C_EN, 0);
+#endif
+ udelay(15);
+ status = mpc_reg_in(®s->msr);
+ }
+
+ return (status & I2C_BB);
+}
+
+static int wait_for_pin(int *status)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int timeout = I2C_TIMEOUT;
+
+ *status = mpc_reg_in(®s->msr);
+
+ while (timeout-- && !(*status & I2C_IF)) {
+ udelay(15);
+ *status = mpc_reg_in(®s->msr);
+ }
+
+ if (!(*status & I2C_IF)) {
+ return -1;
+ }
+
+ mpc_reg_out(®s->msr, 0, I2C_IF);
+
+ return 0;
+}
+
+static int do_address(uchar chip, char rdwr_flag)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int status;
+
+ chip <<= 1;
+
+ if (rdwr_flag) {
+ chip |= 1;
+ }
+
+ mpc_reg_out(®s->mcr, I2C_TX, I2C_TX);
+ mpc_reg_out(®s->mdr, chip, 0);
+
+ if (wait_for_pin(&status)) {
+ return -2;
+ }
+
+ if (status & I2C_RXAK) {
+ return -3;
+ }
+
+ return 0;
+}
+
+static int send_bytes(uchar chip, char *buf, int len)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int wrcount;
+ int status;
+
+ for (wrcount = 0; wrcount < len; ++wrcount) {
+
+ mpc_reg_out(®s->mdr, buf[wrcount], 0);
+
+ if (wait_for_pin(&status)) {
+ break;
+ }
+
+ if (status & I2C_RXAK) {
+ break;
+ }
+
+ }
+
+ return !(wrcount == len);
+}
+
+static int receive_bytes(uchar chip, char *buf, int len)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int dummy = 1;
+ int rdcount = 0;
+ int status;
+ int i;
+
+ mpc_reg_out(®s->mcr, 0, I2C_TX);
+
+ for (i = 0; i < len; ++i) {
+ buf[rdcount] = mpc_reg_in(®s->mdr);
+
+ if (dummy) {
+ dummy = 0;
+ } else {
+ rdcount++;
+ }
+
+
+ if (wait_for_pin(&status)) {
+ return -4;
+ }
+ }
+
+ mpc_reg_out(®s->mcr, I2C_TXAK, I2C_TXAK);
+ buf[rdcount++] = mpc_reg_in(®s->mdr);
+
+ if (wait_for_pin(&status)) {
+ return -5;
+ }
+
+ mpc_reg_out(®s->mcr, 0, I2C_TXAK);
+
+ return 0;
+}
+
+#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
+
+#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
+#define FDR432(x) (u8) ((x & 0x1C) >> 2)
+/*
+ * Reset any i2c devices that may have been interrupted during a system reset.
+ * Normally this would be accomplished by clocking the line until SCL and SDA
+ * are released and then sending a start condtiion (From an Atmel datasheet).
+ * There is no direct access to the i2c pins so instead create start commands
+ * through the i2c interface. Send a start command then delay for the SDA Hold
+ * time, repeat this by disabling/enabling the bus a total of 9 times.
+ */
+static void send_reset(void)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int i;
+ u32 delay;
+ u8 fdr;
+ int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
+ struct mpc5xxx_i2c_tap scltap[] = {
+ {4, 1},
+ {4, 2},
+ {6, 4},
+ {6, 8},
+ {14, 16},
+ {30, 32},
+ {62, 64},
+ {126, 128}
+ };
+
+ fdr = (u8)mpc_reg_in(®s->mfdr);
+
+ delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
+ scltap[FDR432(fdr)].tap2tap) + 3;
+
+ for (i = 0; i < 9; i++) {
+ mpc_reg_out(®s->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
+ udelay(delay);
+ mpc_reg_out(®s->mcr, 0, I2C_INIT_MASK);
+ udelay(delay);
+ }
+
+ mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
+}
+#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
+
+/**************** I2C API ****************/
+
+void i2c_init(int speed, int saddr)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+
+ mpc_reg_out(®s->mcr, 0, 0);
+ mpc_reg_out(®s->madr, saddr << 1, 0);
+
+ /* Set clock
+ */
+ mpc_reg_out(®s->mfdr, mpc_get_fdr(speed), 0);
+
+ /* Enable module
+ */
+ mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
+ mpc_reg_out(®s->msr, 0, I2C_IF);
+
+#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
+ send_reset();
+#endif
+ return;
+}
+
+static int mpc_get_fdr(int speed)
+{
+ static int fdr = -1;
+
+ if (fdr == -1) {
+ ulong best_speed = 0;
+ ulong divider;
+ ulong ipb, scl;
+ ulong bestmatch = 0xffffffffUL;
+ int best_i = 0, best_j = 0, i, j;
+ int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
+ struct mpc5xxx_i2c_tap scltap[] = {
+ {4, 1},
+ {4, 2},
+ {6, 4},
+ {6, 8},
+ {14, 16},
+ {30, 32},
+ {62, 64},
+ {126, 128}
+ };
+
+ ipb = gd->ipb_clk;
+ for (i = 7; i >= 0; i--) {
+ for (j = 7; j >= 0; j--) {
+ scl = 2 * (scltap[j].scl2tap +
+ (SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
+ if (ipb <= speed*scl) {
+ if ((speed*scl - ipb) < bestmatch) {
+ bestmatch = speed*scl - ipb;
+ best_i = i;
+ best_j = j;
+ best_speed = ipb/scl;
+ }
+ }
+ }
+ }
+ divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
+ if (gd->flags & GD_FLG_RELOC) {
+ fdr = divider;
+ } else {
+ if (gd->have_console)
+ printf("%ld kHz, ", best_speed / 1000);
+ return divider;
+ }
+ }
+
+ return fdr;
+}
+
+int i2c_probe(uchar chip)
+{
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int i;
+
+ for (i = 0; i < I2C_RETRIES; i++) {
+ mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
+
+ if (! do_address(chip, 0)) {
+ mpc_reg_out(®s->mcr, 0, I2C_STA);
+ udelay(500);
+ break;
+ }
+
+ mpc_reg_out(®s->mcr, 0, I2C_STA);
+ udelay(500);
+ }
+
+ return (i == I2C_RETRIES);
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ char xaddr[4];
+ struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb()) {
+ if (gd->have_console)
+ printf("i2c_read: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
+ if (do_address(chip, 0)) {
+ if (gd->have_console)
+ printf("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes(chip, &xaddr[4-alen], alen)) {
+ if (gd->have_console)
+ printf("i2c_read: send_bytes failed\n");
+ goto Done;
+ }
+
+ mpc_reg_out(®s->mcr, I2C_RSTA, I2C_RSTA);
+ if (do_address(chip, 1)) {
+ if (gd->have_console)
+ printf("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (receive_bytes(chip, (char *)buf, len)) {
+ if (gd->have_console)
+ printf("i2c_read: receive_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+Done:
+ mpc_reg_out(®s->mcr, 0, I2C_STA);
+ return ret;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ char xaddr[4];
+ struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb()) {
+ if (gd->have_console)
+ printf("i2c_write: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
+ if (do_address(chip, 0)) {
+ if (gd->have_console)
+ printf("i2c_write: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes(chip, &xaddr[4-alen], alen)) {
+ if (gd->have_console)
+ printf("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ if (send_bytes(chip, (char *)buf, len)) {
+ if (gd->have_console)
+ printf("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+Done:
+ mpc_reg_out(®s->mcr, 0, I2C_STA);
+ return ret;
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Pierre AUBERT, Staubli Faverges, <p.aubert@staubli.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Init is derived from Linux code.
+ */
+#include <common.h>
+
+#if defined(CONFIG_CMD_IDE)
+#include <mpc5xxx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+#ifdef CONFIG_IDE_RESET
+extern void init_ide_reset (void);
+#endif
+
+int ide_preinit (void)
+{
+ long period, t0, t1, t2_8, t2_16, t4, ta;
+ vu_long reg;
+ struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
+
+ reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG;
+#if defined(CONFIG_SYS_ATA_CS_ON_I2C2)
+ /* ATA cs0/1 on i2c2 clk/io */
+ reg = (reg & ~0x03000000ul) | 0x02000000ul;
+#elif defined(CONFIG_SYS_ATA_CS_ON_TIMER01)
+ /* ATA cs0/1 on Timer 0/1 */
+ reg = (reg & ~0x03000000ul) | 0x03000000ul;
+#else
+ /* ATA cs0/1 on Local Plus cs4/5 */
+ reg = (reg & ~0x03000000ul) | 0x01000000ul;
+#endif /* CONFIG_TOTAL5200 */
+ *(vu_long *) MPC5XXX_GPS_PORT_CONFIG = reg;
+
+ /* All sample codes do that... */
+ *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0;
+
+#if defined(CONFIG_UC101)
+ /* Configure and reset host */
+ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG =
+ MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
+ udelay (10);
+ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0;
+#else
+ /* Configure and reset host */
+ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY |
+ MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
+ udelay (10);
+ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY;
+#endif
+
+ /* Disable prefetch on Commbus */
+ psdma->PtdCntrl |= 1;
+
+ /* Init timings : we use PIO mode 0 timings */
+ period = 1000000000 / gd->ipb_clk; /* period in ns */
+
+ t0 = CALC_TIMING (600);
+ t2_8 = CALC_TIMING (290);
+ t2_16 = CALC_TIMING (165);
+ reg = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8);
+ *(vu_long *) MPC5XXX_ATA_PIO1 = reg;
+
+ t4 = CALC_TIMING (30);
+ t1 = CALC_TIMING (70);
+ ta = CALC_TIMING (35);
+ reg = (t4 << 24) | (t1 << 16) | (ta << 8);
+
+ *(vu_long *) MPC5XXX_ATA_PIO2 = reg;
+
+#ifdef CONFIG_IDE_RESET
+ init_ide_reset ();
+#endif /* CONFIG_IDE_RESET */
+
+ return (0);
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de
+ *
+ * (C) Copyright -2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* this section was ripped out of arch/powerpc/syslib/mpc52xx_pic.c in the
+ * Linux 2.6 source with the following copyright.
+ *
+ * Based on (well, mostly copied from) the code from the 2.4 kernel by
+ * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <command.h>
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+static struct irq_action irq_handlers[NR_IRQS];
+
+static struct mpc5xxx_intr *intr;
+static struct mpc5xxx_sdma *sdma;
+
+static void mpc5xxx_ic_disable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << 11);
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1)));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE);
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_enable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << 11;
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << (10 - (irq - MPC5XXX_IRQ1));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_ack(unsigned int irq)
+{
+ u32 val;
+
+ /*
+ * Only some irqs are reset here, others in interrupting hardware.
+ */
+
+ switch (irq) {
+ case MPC5XXX_IRQ0:
+ val = in_be32(&intr->ctrl);
+ val |= 0x08000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_CCS_IRQ:
+ val = in_be32(&intr->enc_status);
+ val |= 0x00000400;
+ out_be32(&intr->enc_status, val);
+ break;
+ case MPC5XXX_IRQ1:
+ val = in_be32(&intr->ctrl);
+ val |= 0x04000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ2:
+ val = in_be32(&intr->ctrl);
+ val |= 0x02000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ3:
+ val = in_be32(&intr->ctrl);
+ val |= 0x01000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ default:
+ if (irq >= MPC5XXX_SDMA_IRQ_BASE
+ && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) {
+ out_be32(&sdma->IntPend,
+ 1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ }
+ break;
+ }
+}
+
+static void mpc5xxx_ic_disable_and_ack(unsigned int irq)
+{
+ mpc5xxx_ic_disable(irq);
+ mpc5xxx_ic_ack(irq);
+}
+
+static void mpc5xxx_ic_end(unsigned int irq)
+{
+ mpc5xxx_ic_enable(irq);
+}
+
+void mpc5xxx_init_irq(void)
+{
+ u32 intr_ctrl;
+
+ /* Remap the necessary zones */
+ intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
+ sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA);
+
+ /* Disable all interrupt sources. */
+ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
+ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
+ out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
+ out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
+ 0x00ff0000 | /* IRQ 0-3 level sensitive low active */
+ 0x00001000 | /* MEE master external enable */
+ 0x00000000 | /* 0 means disable IRQ 0-3 */
+ 0x00000001; /* CEb route critical normally */
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Zero a bunch of the priority settings. */
+ out_be32(&intr->per_pri1, 0);
+ out_be32(&intr->per_pri2, 0);
+ out_be32(&intr->per_pri3, 0);
+ out_be32(&intr->main_pri1, 0);
+ out_be32(&intr->main_pri2, 0);
+}
+
+int mpc5xxx_get_irq(struct pt_regs *regs)
+{
+ u32 status;
+ int irq = -1;
+
+ status = in_be32(&intr->enc_status);
+
+ if (status & 0x00000400) { /* critical */
+ irq = (status >> 8) & 0x3;
+ if (irq == 2) /* high priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_CRIT_IRQ_BASE;
+ } else if (status & 0x00200000) { /* main */
+ irq = (status >> 16) & 0x1f;
+ if (irq == 4) /* low priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_MAIN_IRQ_BASE;
+ } else if (status & 0x20000000) { /* peripheral */
+ peripheral:
+ irq = (status >> 24) & 0x1f;
+ if (irq == 0) { /* bestcomm */
+ status = in_be32(&sdma->IntPend);
+ irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1;
+ } else
+ irq += MPC5XXX_PERP_IRQ_BASE;
+ }
+
+ return irq;
+}
+
+/****************************************************************************/
+
+int interrupt_init_cpu(ulong * decrementer_count)
+{
+ *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+ mpc5xxx_init_irq();
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+ int irq, unmask = 1;
+
+ irq = mpc5xxx_get_irq(regs);
+
+ mpc5xxx_ic_disable_and_ack(irq);
+
+ enable_interrupts();
+
+ if (irq_handlers[irq].handler != NULL)
+ (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
+ else {
+ printf("\nBogus External Interrupt IRQ %d\n", irq);
+ /*
+ * turn off the bogus interrupt, otherwise it
+ * might repeat forever
+ */
+ unmask = 0;
+ }
+
+ if (unmask)
+ mpc5xxx_ic_end(irq);
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ if (irq_handlers[irq].handler != NULL)
+ printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ mpc5xxx_ic_enable(irq);
+}
+
+void irq_free_handler(int irq)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ mpc5xxx_ic_disable(irq);
+
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
+}
+
+/****************************************************************************/
+
+#if defined(CONFIG_CMD_IRQ)
+void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ int irq, re_enable;
+ u32 intr_ctrl;
+ char *irq_config[] = { "level sensitive, active high",
+ "edge sensitive, rising active edge",
+ "edge sensitive, falling active edge",
+ "level sensitive, active low"
+ };
+
+ re_enable = disable_interrupts();
+
+ intr_ctrl = in_be32(&intr->ctrl);
+ printf("Interrupt configuration:\n");
+
+ for (irq = 0; irq <= 3; irq++) {
+ printf("IRQ%d: %s\n", irq,
+ irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]);
+ }
+
+ puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_handlers[irq].handler != NULL)
+ printf("%02d %08lx %08lx %ld\n", irq,
+ (ulong) irq_handlers[irq].handler,
+ (ulong) irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+
+ if (re_enable)
+ enable_interrupts();
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0(3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,0,r3
+ sync
+ blr
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on code
+ * (C) Copyright Motorola, Inc., 2000
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+/* BestComm/SmartComm microcode */
+extern int taskTable;
+
+void loadtask(int basetask, int tasks)
+{
+ int *sram = (int *)MPC5XXX_SRAM;
+ int *task_org = &taskTable;
+ unsigned int start, offset, end;
+ int i;
+
+#ifdef DEBUG
+ printf("basetask = %d, tasks = %d\n", basetask, tasks);
+ printf("task_org = 0x%08x\n", (unsigned int)task_org);
+#endif
+
+ /* setup TaskBAR register */
+ *(vu_long *)MPC5XXX_SDMA = MPC5XXX_SRAM;
+
+ /* relocate task table entries */
+ offset = (unsigned int)sram;
+ for (i = basetask; i < basetask + tasks; i++) {
+ sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
+ sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
+ sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
+ sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
+ sram[i * 8 + 4] = task_org[i * 8 + 4];
+ sram[i * 8 + 5] = task_org[i * 8 + 5];
+ sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
+ sram[i * 8 + 7] = task_org[i * 8 + 7];
+ }
+
+ /* relocate task descriptors */
+ start = (sram[basetask * 8] - (unsigned int)sram);
+ end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int)sram);
+
+#ifdef DEBUG
+ printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
+#endif
+
+ start /= 4;
+ end /= 4;
+ for (i = start; i <= end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ /* relocate variables */
+ start = (sram[basetask * 8 + 2] - (unsigned int)sram);
+ end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 - (unsigned int)sram);
+ start /= 4;
+ end /= 4;
+ for (i = start; i < end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ /* relocate function decriptors */
+ start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int)sram);
+ end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 - (unsigned int)sram);
+ start /= 4;
+ end /= 4;
+ for (i = start; i < end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ asm volatile ("sync");
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_PCI)
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <mpc5xxx.h>
+
+/* System RAM mapped over PCI */
+#define CONFIG_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_MEMORY_SIZE (1024 * 1024 * 1024)
+
+/* PCIIWCR bit fields */
+#define IWCR_MEM (0 << 3)
+#define IWCR_IO (1 << 3)
+#define IWCR_READ (0 << 1)
+#define IWCR_READLINE (1 << 1)
+#define IWCR_READMULT (2 << 1)
+#define IWCR_EN (1 << 0)
+
+static int mpc5200_read_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32* value)
+{
+ *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
+ eieio();
+ udelay(10);
+#if (defined CONFIG_PF5200 || defined CONFIG_CPCI5200)
+ if (dev & 0x00ff0000) {
+ u32 val;
+ val = in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+2));
+ udelay(10);
+ val = val << 16;
+ val |= in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+0));
+ *value = val;
+ } else {
+ *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
+ }
+ udelay(10);
+#else
+ *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
+#endif
+ eieio();
+ *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
+ udelay(10);
+ return 0;
+}
+
+static int mpc5200_write_config_dword(struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
+{
+ *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
+ eieio();
+ udelay(10);
+ out_le32((volatile u32 *)CONFIG_PCI_IO_PHYS, value);
+ eieio();
+ *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
+ udelay(10);
+ return 0;
+}
+
+void pci_mpc5xxx_init (struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEMORY_BUS,
+ CONFIG_PCI_MEMORY_PHYS,
+ CONFIG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_register_hose(hose);
+
+ /* GPIO Multiplexing - enable PCI */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~(1 << 15);
+
+ /* Set host bridge as pci master and enable memory decoding */
+ *(vu_long *)MPC5XXX_PCI_CMD |=
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+
+ /* Set maximum latency timer */
+ *(vu_long *)MPC5XXX_PCI_CFG |= (0xf800);
+
+ /* Set cache line size */
+ *(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) |
+ (CONFIG_SYS_CACHELINE_SIZE / 4);
+
+ /* Map MBAR to PCI space */
+ *(vu_long *)MPC5XXX_PCI_BAR0 = CONFIG_SYS_MBAR;
+ *(vu_long *)MPC5XXX_PCI_TBATR0 = CONFIG_SYS_MBAR | 1;
+
+ /* Map RAM to PCI space */
+ *(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
+ *(vu_long *)MPC5XXX_PCI_TBATR1 = CONFIG_PCI_MEMORY_PHYS | 1;
+
+ /* Park XLB on PCI */
+ *(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~((7 << 8) | (3 << 5));
+ *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (3 << 8) | (3 << 5);
+
+ /* Disable interrupts from PCI controller */
+ *(vu_long *)MPC5XXX_PCI_GSCR &= ~(7 << 12);
+ *(vu_long *)MPC5XXX_PCI_ICR &= ~(7 << 24);
+
+ /* Set PCI retry counter to 0 = infinite retry. */
+ /* The default of 255 is too short for slow devices. */
+ *(vu_long *)MPC5XXX_PCI_ICR &= 0xFFFFFF00;
+
+ /* Disable initiator windows */
+ *(vu_long *)MPC5XXX_PCI_IWCR = 0;
+
+ /* Map PCI memory to physical space */
+ *(vu_long *)MPC5XXX_PCI_IW0BTAR = CONFIG_PCI_MEM_PHYS |
+ (((CONFIG_PCI_MEM_SIZE - 1) >> 8) & 0x00ff0000) |
+ (CONFIG_PCI_MEM_BUS >> 16);
+ *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_MEM | IWCR_READ | IWCR_EN) << 24;
+
+ /* Map PCI I/O to physical space */
+ *(vu_long *)MPC5XXX_PCI_IW1BTAR = CONFIG_PCI_IO_PHYS |
+ (((CONFIG_PCI_IO_SIZE - 1) >> 8) & 0x00ff0000) |
+ (CONFIG_PCI_IO_BUS >> 16);
+ *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_IO | IWCR_READ | IWCR_EN) << 16;
+
+ /* Reset the PCI bus */
+ *(vu_long *)MPC5XXX_PCI_GSCR |= 1;
+ udelay(1000);
+ *(vu_long *)MPC5XXX_PCI_GSCR &= ~1;
+ udelay(1000);
+
+ pci_set_ops(hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ mpc5200_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ mpc5200_write_config_dword);
+
+ udelay(1000);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCI */
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
+ * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the
+ * Linux/PPC sources (m8260_tty.c had no copyright info in it).
+ *
+ * Martin Krause, 8 Jun 2006
+ * Added CONFIG_SERIAL_MULTI support
+ */
+
+/*
+ * Minimal serial functions needed to use one of the PSC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PSC_CONSOLE)
+
+#if CONFIG_PSC_CONSOLE == 1
+#define PSC_BASE MPC5XXX_PSC1
+#elif CONFIG_PSC_CONSOLE == 2
+#define PSC_BASE MPC5XXX_PSC2
+#elif CONFIG_PSC_CONSOLE == 3
+#define PSC_BASE MPC5XXX_PSC3
+#elif CONFIG_PSC_CONSOLE == 4
+#define PSC_BASE MPC5XXX_PSC4
+#elif CONFIG_PSC_CONSOLE == 5
+#define PSC_BASE MPC5XXX_PSC5
+#elif CONFIG_PSC_CONSOLE == 6
+#define PSC_BASE MPC5XXX_PSC6
+#else
+#error CONFIG_PSC_CONSOLE must be in 1 ... 6
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI) && !defined(CONFIG_PSC_CONSOLE2)
+#error you must define CONFIG_PSC_CONSOLE2 if CONFIG_SERIAL_MULTI is set
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+#if CONFIG_PSC_CONSOLE2 == 1
+#define PSC_BASE2 MPC5XXX_PSC1
+#elif CONFIG_PSC_CONSOLE2 == 2
+#define PSC_BASE2 MPC5XXX_PSC2
+#elif CONFIG_PSC_CONSOLE2 == 3
+#define PSC_BASE2 MPC5XXX_PSC3
+#elif CONFIG_PSC_CONSOLE2 == 4
+#define PSC_BASE2 MPC5XXX_PSC4
+#elif CONFIG_PSC_CONSOLE2 == 5
+#define PSC_BASE2 MPC5XXX_PSC5
+#elif CONFIG_PSC_CONSOLE2 == 6
+#define PSC_BASE2 MPC5XXX_PSC6
+#else
+#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6
+#endif
+#endif /* CONFIG_SERIAL_MULTI */
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_init_dev (unsigned long dev_base)
+#else
+int serial_init (void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+ unsigned long baseclk;
+ int div;
+
+ /* reset PSC */
+ psc->command = PSC_SEL_MODE_REG_1;
+
+ /* select clock sources */
+ psc->psc_clock_select = 0;
+ baseclk = (gd->ipb_clk + 16) / 32;
+
+ /* switch to UART mode */
+ psc->sicr = 0;
+
+ /* configure parity, bit length and so on */
+ psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
+ psc->mode = PSC_MODE_ONE_STOP;
+
+ /* set up UART divisor */
+ div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
+ psc->ctur = (div >> 8) & 0xff;
+ psc->ctlr = div & 0xff;
+
+ /* disable all interrupts */
+ psc->psc_imr = 0;
+
+ /* reset and enable Rx/Tx */
+ psc->command = PSC_RST_RX;
+ psc->command = PSC_RST_TX;
+ psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
+
+ return (0);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_dev (unsigned long dev_base, const char c)
+#else
+void serial_putc(const char c)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ if (c == '\n')
+#if defined(CONFIG_SERIAL_MULTI)
+ serial_putc_dev (dev_base, '\r');
+#else
+ serial_putc('\r');
+#endif
+
+ /* Wait for last character to go. */
+ while (!(psc->psc_status & PSC_SR_TXEMP))
+ ;
+
+ psc->psc_buffer_8 = c;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_raw_dev(unsigned long dev_base, const char c)
+#else
+void serial_putc_raw(const char c)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+ /* Wait for last character to go. */
+ while (!(psc->psc_status & PSC_SR_TXEMP))
+ ;
+
+ psc->psc_buffer_8 = c;
+}
+
+
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_puts_dev (unsigned long dev_base, const char *s)
+#else
+void serial_puts (const char *s)
+#endif
+{
+ while (*s) {
+#if defined(CONFIG_SERIAL_MULTI)
+ serial_putc_dev (dev_base, *s++);
+#else
+ serial_putc (*s++);
+#endif
+ }
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getc_dev (unsigned long dev_base)
+#else
+int serial_getc(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ /* Wait for a character to arrive. */
+ while (!(psc->psc_status & PSC_SR_RXRDY))
+ ;
+
+ return psc->psc_buffer_8;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_tstc_dev (unsigned long dev_base)
+#else
+int serial_tstc(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ return (psc->psc_status & PSC_SR_RXRDY);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_setbrg_dev (unsigned long dev_base)
+#else
+void serial_setbrg(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+ unsigned long baseclk, div;
+
+ baseclk = (gd->ipb_clk + 16) / 32;
+
+ /* set up UART divisor */
+ div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
+ psc->ctur = (div >> 8) & 0xFF;
+ psc->ctlr = div & 0xff;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_setrts_dev (unsigned long dev_base, int s)
+#else
+void serial_setrts(int s)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ if (s) {
+ /* Assert RTS (become LOW) */
+ psc->op1 = 0x1;
+ }
+ else {
+ /* Negate RTS (become HIGH) */
+ psc->op0 = 0x1;
+ }
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getcts_dev (unsigned long dev_base)
+#else
+int serial_getcts(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ return (psc->ip & 0x1) ? 0 : 1;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial0_init(void)
+{
+ return (serial_init_dev(PSC_BASE));
+}
+
+int serial1_init(void)
+{
+ return (serial_init_dev(PSC_BASE2));
+}
+void serial0_setbrg (void)
+{
+ serial_setbrg_dev(PSC_BASE);
+}
+void serial1_setbrg (void)
+{
+ serial_setbrg_dev(PSC_BASE2);
+}
+
+void serial0_putc(const char c)
+{
+ serial_putc_dev(PSC_BASE,c);
+}
+
+void serial1_putc(const char c)
+{
+ serial_putc_dev(PSC_BASE2, c);
+}
+void serial0_puts(const char *s)
+{
+ serial_puts_dev(PSC_BASE, s);
+}
+
+void serial1_puts(const char *s)
+{
+ serial_puts_dev(PSC_BASE2, s);
+}
+
+int serial0_getc(void)
+{
+ return(serial_getc_dev(PSC_BASE));
+}
+
+int serial1_getc(void)
+{
+ return(serial_getc_dev(PSC_BASE2));
+}
+int serial0_tstc(void)
+{
+ return (serial_tstc_dev(PSC_BASE));
+}
+
+int serial1_tstc(void)
+{
+ return (serial_tstc_dev(PSC_BASE2));
+}
+
+struct serial_device serial0_device =
+{
+ "serial0",
+ "UART0",
+ serial0_init,
+ serial0_setbrg,
+ serial0_getc,
+ serial0_tstc,
+ serial0_putc,
+ serial0_puts,
+};
+
+struct serial_device serial1_device =
+{
+ "serial1",
+ "UART1",
+ serial1_init,
+ serial1_setbrg,
+ serial1_getc,
+ serial1_tstc,
+ serial1_putc,
+ serial1_puts,
+};
+#endif /* CONFIG_SERIAL_MULTI */
+
+#endif /* CONFIG_PSC_CONSOLE */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+
+/* Bus-to-Core Multipliers */
+
+static int bus2core[] = {
+ 3, 2, 2, 2, 4, 4, 5, 9,
+ 6, 11, 8, 10, 3, 12, 7, 0,
+ 6, 5, 13, 2, 14, 4, 15, 9,
+ 0, 11, 8, 10, 16, 12, 7, 0
+};
+/* ------------------------------------------------------------------------- */
+
+/*
+ *
+ */
+
+int get_clocks (void)
+{
+ ulong val, vco;
+
+#if !defined(CONFIG_SYS_MPC5XXX_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_SYS_MPC5XXX_CLKIN
+#endif
+
+ val = *(vu_long *)MPC5XXX_CDM_PORCFG;
+ if (val & (1 << 6)) {
+ vco = CONFIG_SYS_MPC5XXX_CLKIN * 12;
+ } else {
+ vco = CONFIG_SYS_MPC5XXX_CLKIN * 16;
+ }
+ if (val & (1 << 5)) {
+ gd->bus_clk = vco / 8;
+ } else {
+ gd->bus_clk = vco / 4;
+ }
+ gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 2;
+
+ val = *(vu_long *)MPC5XXX_CDM_CFG;
+ if (val & (1 << 8)) {
+ gd->ipb_clk = gd->bus_clk / 2;
+ } else {
+ gd->ipb_clk = gd->bus_clk;
+ }
+ switch (val & 3) {
+ case 0: gd->pci_clk = gd->ipb_clk; break;
+ case 1: gd->pci_clk = gd->ipb_clk / 2; break;
+ default: gd->pci_clk = gd->bus_clk / 4; break;
+ }
+
+ return (0);
+}
+
+int prt_mpc5xxx_clks (void)
+{
+ char buf1[32], buf2[32], buf3[32];
+
+ printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
+ strmhz(buf1, gd->bus_clk),
+ strmhz(buf2, gd->ipb_clk),
+ strmhz(buf3, gd->pci_clk)
+ );
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC5xxx CPUs
+ */
+#include <config.h>
+#include <mpc5xxx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+/* Floating Point enable, Machine Check and Recoverable Interr. */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * Version string
+ */
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+/*
+ * Exception vectors
+ */
+ .text
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On */
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+boot_warm:
+ mfmsr r5 /* save msr contents */
+
+ /* Move CSBoot and adjust instruction pointer */
+ /*--------------------------------------------------------------*/
+
+#if defined(CONFIG_SYS_LOWBOOT)
+# if defined(CONFIG_SYS_RAMBOOT)
+# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
+# endif /* CONFIG_SYS_RAMBOOT */
+ lis r4, CONFIG_SYS_DEFAULT_MBAR@h
+ lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
+ ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
+ stw r3, 0x4(r4) /* CS0 start */
+ lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
+ ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
+ stw r3, 0x8(r4) /* CS0 stop */
+ lis r3, 0x02010000@h
+ ori r3, r3, 0x02010000@l
+ stw r3, 0x54(r4) /* CS0 and Boot enable */
+
+ lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
+ ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
+ mtlr r3
+ blr
+
+lowboot_reentry:
+ lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
+ ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
+ stw r3, 0x4c(r4) /* Boot start */
+ lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
+ ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
+ stw r3, 0x50(r4) /* Boot stop */
+ lis r3, 0x02000001@h
+ ori r3, r3, 0x02000001@l
+ stw r3, 0x54(r4) /* Boot enable, CS0 disable */
+#endif /* CONFIG_SYS_LOWBOOT */
+
+#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
+ lis r3, CONFIG_SYS_MBAR@h
+ ori r3, r3, CONFIG_SYS_MBAR@l
+ /* MBAR is mirrored into the MBAR SPR */
+ mtspr MBAR,r3
+ rlwinm r3, r3, 16, 16, 31
+ lis r4, CONFIG_SYS_DEFAULT_MBAR@h
+ stw r3, 0(r4)
+#endif /* CONFIG_SYS_DEFAULT_MBAR */
+
+ /* Initialise the MPC5xxx processor core */
+ /*--------------------------------------------------------------*/
+
+ bl init_5xxx_core
+
+ /* initialize some things that are hard to access from C */
+ /*--------------------------------------------------------------*/
+
+ /* set up stack in on-chip SRAM */
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+ ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*--------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (in Flash)*/
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/*
+ * This code initialises the MPC5xxx processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+
+ .globl init_5xx_core
+init_5xxx_core:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*--------------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*--------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_HID0_INIT@h
+ ori r3, r3, CONFIG_SYS_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID0_FINAL@h
+ ori r3, r3, CONFIG_SYS_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ /* clear all BAT's */
+ /*--------------------------------------------------------------*/
+
+ li r0, 0
+ mtspr DBAT0U, r0
+ mtspr DBAT0L, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT1L, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT2L, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT3L, r0
+ mtspr DBAT4U, r0
+ mtspr DBAT4L, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT5L, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT6L, r0
+ mtspr DBAT7U, r0
+ mtspr DBAT7L, r0
+ mtspr IBAT0U, r0
+ mtspr IBAT0L, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT1L, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT2L, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT3L, r0
+ mtspr IBAT4U, r0
+ mtspr IBAT4L, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT5L, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT6L, r0
+ mtspr IBAT7U, r0
+ mtspr IBAT7L, r0
+ SYNC
+
+ /* invalidate all tlb's */
+ /* */
+ /* From the 603e User Manual: "The 603e provides the ability to */
+ /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
+ /* instruction invalidates the TLB entry indexed by the EA, and */
+ /* operates on both the instruction and data TLBs simultaneously*/
+ /* invalidating four TLB entries (both sets in each TLB). The */
+ /* index corresponds to bits 15-19 of the EA. To invalidate all */
+ /* entries within both TLBs, 32 tlbie instructions should be */
+ /* issued, incrementing this field by one each time." */
+ /* */
+ /* "Note that the tlbia instruction is not implemented on the */
+ /* 603e." */
+ /* */
+ /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
+ /* incrementing by 0x1000 each time. The code below is sort of */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
+ /* */
+ /*--------------------------------------------------------------*/
+
+ li r3, 32
+ mtctr r3
+ li r3, 0
+1: tlbie r3
+ addi r3, r3, 0x1000
+ bdnz 1b
+ SYNC
+
+ /* Done! */
+ /*--------------------------------------------------------------*/
+
+ blr
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ lis r4, 0
+ ori r4, r4, HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_DCE
+ lis r4, 0
+ ori r4, r4, HID0_DLOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_DCI
+ sync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_DCE|HID0_DLOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_DCI
+ sync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
+ blr
+
+ .globl get_svr
+get_svr:
+ mfspr r3, SVR
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
+ rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 9f
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
+ rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 7f
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ",regs);
+ /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
+ switch( regs->msr & 0x000F0000)
+ {
+ case (0x80000000>>12) :
+ printf("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13) :
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14) :
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000>>15) :
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text)
+ lib/crc32.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.ppcenv)
+
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
+
+#include <mpc5xxx.h>
+
+int usb_cpu_init(void)
+{
+ /* Set the USB Clock */
+ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
+
+#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
+ /* remove all PSC3 USB bits first before ORing in ours */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
+#else
+ /* remove all USB bits first before ORing in ours */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
+#endif
+ /* Activate USB port */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
+
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the MPC5200.
+ *
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#include <mpc5xxx.h>
+
+#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+ (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define readl(a) (*((volatile u32 *)(a)))
+#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+#define ohci_cpu_to_le16(x) (x)
+#define ohci_cpu_to_le32(x) (x)
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = readl (&hc->regs->roothub.register); \
+ if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = readl (&hc->regs->roothub.register); \
+ temp; })
+
+static u32 roothub_a (struct ohci *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+ { return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+ { return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+ int i;
+ int last;
+ struct td * td;
+
+ last = urb->length - 1;
+ if (last >= 0) {
+ for (i = 0; i <= last; i++) {
+ td = urb->td[i];
+ if (td) {
+ td->usb_dev = NULL;
+ urb->td[i] = NULL;
+ }
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, char * str, int small)
+{
+ urb_priv_t * purb = &urb_priv;
+
+ dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+ str,
+ sohci_get_current_frame_number (dev),
+ usb_pipedevice (pipe),
+ usb_pipeendpoint (pipe),
+ usb_pipeout (pipe)? 'O': 'I',
+ usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+ (usb_pipecontrol (pipe)? "CTRL": "BULK"),
+ purb->actual_length,
+ transfer_len, dev->status);
+#ifdef OHCI_VERBOSE_DEBUG
+ if (!small) {
+ int i, len;
+
+ if (usb_pipecontrol (pipe)) {
+ printf (__FILE__ ": cmd(8):");
+ for (i = 0; i < 8 ; i++)
+ printf (" %02x", ((__u8 *) setup) [i]);
+ printf ("\n");
+ }
+ if (transfer_len > 0 && buffer) {
+ printf (__FILE__ ": data(%d/%d):",
+ purb->actual_length,
+ transfer_len);
+ len = usb_pipeout (pipe)?
+ transfer_len: purb->actual_length;
+ for (i = 0; i < 16 && i < len; i++)
+ printf (" %02x", ((__u8 *) buffer) [i]);
+ printf ("%s\n", i < len? "...": "");
+ }
+ }
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+ int i, j;
+ __u32 * ed_p;
+ for (i= 0; i < 32; i++) {
+ j = 5;
+ ed_p = &(ohci->hcca->int_table [i]);
+ if (*ed_p == 0)
+ continue;
+ printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+ while (*ed_p != 0 && j--) {
+ ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
+ printf (" ed: %4x;", ed->hwINFO);
+ ed_p = &ed->hwNextED;
+ }
+ printf ("\n");
+ }
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+ dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+ label,
+ mask,
+ (mask & OHCI_INTR_MIE) ? " MIE" : "",
+ (mask & OHCI_INTR_OC) ? " OC" : "",
+ (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+ (mask & OHCI_INTR_FNO) ? " FNO" : "",
+ (mask & OHCI_INTR_UE) ? " UE" : "",
+ (mask & OHCI_INTR_RD) ? " RD" : "",
+ (mask & OHCI_INTR_SF) ? " SF" : "",
+ (mask & OHCI_INTR_WDH) ? " WDH" : "",
+ (mask & OHCI_INTR_SO) ? " SO" : ""
+ );
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+ ed_t *edp = (ed_t *)value;
+
+ if (value) {
+ dbg ("%s %08x", label, value);
+ dbg ("%08x", edp->hwINFO);
+ dbg ("%08x", edp->hwTailP);
+ dbg ("%08x", edp->hwHeadP);
+ dbg ("%08x", edp->hwNextED);
+ }
+}
+
+static char * hcfs2string (int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET: return "reset";
+ case OHCI_USB_RESUME: return "resume";
+ case OHCI_USB_OPER: return "operational";
+ case OHCI_USB_SUSPEND: return "suspend";
+ }
+ return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+ struct ohci_regs *regs = controller->regs;
+ __u32 temp;
+
+ temp = readl (®s->revision) & 0xff;
+ if (temp != 0x10)
+ dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+ temp = readl (®s->control);
+ dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+ (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+ (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+ (temp & OHCI_CTRL_IR) ? " IR" : "",
+ hcfs2string (temp & OHCI_CTRL_HCFS),
+ (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+ (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+ (temp & OHCI_CTRL_IE) ? " IE" : "",
+ (temp & OHCI_CTRL_PLE) ? " PLE" : "",
+ temp & OHCI_CTRL_CBSR
+ );
+
+ temp = readl (®s->cmdstatus);
+ dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+ (temp & OHCI_SOC) >> 16,
+ (temp & OHCI_OCR) ? " OCR" : "",
+ (temp & OHCI_BLF) ? " BLF" : "",
+ (temp & OHCI_CLF) ? " CLF" : "",
+ (temp & OHCI_HCR) ? " HCR" : ""
+ );
+
+ ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
+ ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
+
+ maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
+
+ maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
+ maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
+
+ maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
+ maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
+
+ maybe_print_eds ("donehead", readl (®s->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+ __u32 temp, ndp, i;
+
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+
+ if (verbose) {
+ dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+ ((temp & RH_A_POTPGT) >> 24) & 0xff,
+ (temp & RH_A_NOCP) ? " NOCP" : "",
+ (temp & RH_A_OCPM) ? " OCPM" : "",
+ (temp & RH_A_DT) ? " DT" : "",
+ (temp & RH_A_NPS) ? " NPS" : "",
+ (temp & RH_A_PSM) ? " PSM" : "",
+ ndp
+ );
+ temp = roothub_b (controller);
+ dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+ temp,
+ (temp & RH_B_PPCM) >> 16,
+ (temp & RH_B_DR)
+ );
+ temp = roothub_status (controller);
+ dbg ("roothub.status: %08x%s%s%s%s%s%s",
+ temp,
+ (temp & RH_HS_CRWE) ? " CRWE" : "",
+ (temp & RH_HS_OCIC) ? " OCIC" : "",
+ (temp & RH_HS_LPSC) ? " LPSC" : "",
+ (temp & RH_HS_DRWE) ? " DRWE" : "",
+ (temp & RH_HS_OCI) ? " OCI" : "",
+ (temp & RH_HS_LPS) ? " LPS" : ""
+ );
+ }
+
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+ i,
+ temp,
+ (temp & RH_PS_PRSC) ? " PRSC" : "",
+ (temp & RH_PS_OCIC) ? " OCIC" : "",
+ (temp & RH_PS_PSSC) ? " PSSC" : "",
+ (temp & RH_PS_PESC) ? " PESC" : "",
+ (temp & RH_PS_CSC) ? " CSC" : "",
+
+ (temp & RH_PS_LSDA) ? " LSDA" : "",
+ (temp & RH_PS_PPS) ? " PPS" : "",
+ (temp & RH_PS_PRS) ? " PRS" : "",
+ (temp & RH_PS_POCI) ? " POCI" : "",
+ (temp & RH_PS_PSS) ? " PSS" : "",
+
+ (temp & RH_PS_PES) ? " PES" : "",
+ (temp & RH_PS_CCS) ? " CCS" : ""
+ );
+ }
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+ dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+ /* dumps some of the state we know about */
+ ohci_dump_status (controller);
+ if (verbose)
+ ep_print_int_eds (controller, "hcca");
+ dbg ("hcca frame #%04x", controller->hcca->frame_no);
+ ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ ohci_t *ohci;
+ ed_t * ed;
+ urb_priv_t *purb_priv;
+ int i, size = 0;
+
+ ohci = &gohci;
+
+ /* when controller's hung, permit only roothub cleanup attempts
+ * such as powering down ports */
+ if (ohci->disabled) {
+ err("sohci_submit_job: EPIPE");
+ return -1;
+ }
+
+ /* if we have an unfinished URB from previous transaction let's
+ * fail and scream as quickly as possible so as not to corrupt
+ * further communication */
+ if (!urb_finished) {
+ err("sohci_submit_job: URB NOT FINISHED");
+ return -1;
+ }
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb_finished = 0;
+
+ /* every endpoint has a ed, locate and fill it */
+ if (!(ed = ep_add_ed (dev, pipe))) {
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+
+ /* for the private part of the URB we need the number of TDs (size) */
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK: /* one TD for every 4096 Byte */
+ size = (transfer_len - 1) / 4096 + 1;
+ break;
+ case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+ size = (transfer_len == 0)? 2:
+ (transfer_len - 1) / 4096 + 3;
+ break;
+ }
+
+ if (size >= (N_URB_TD - 1)) {
+ err("need %d TDs, only have %d", size, N_URB_TD);
+ return -1;
+ }
+ purb_priv = &urb_priv;
+ purb_priv->pipe = pipe;
+
+ /* fill the private part of the URB */
+ purb_priv->length = size;
+ purb_priv->ed = ed;
+ purb_priv->actual_length = 0;
+
+ /* allocate the TDs */
+ /* note that td[0] was allocated in ep_add_ed */
+ for (i = 0; i < size; i++) {
+ purb_priv->td[i] = td_alloc (dev);
+ if (!purb_priv->td[i]) {
+ purb_priv->length = i;
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+ }
+
+ if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: EINVAL");
+ return -1;
+ }
+
+ /* link the ed into a chain if is not already */
+ if (ed->state != ED_OPER)
+ ep_link (ohci, ed);
+
+ /* fill the TDs and link it to the ed */
+ td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+ ohci_t *ohci = &gohci;
+
+ return ohci_cpu_to_le16 (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->state = ED_OPER;
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ed->hwNextED = 0;
+ if (ohci->ed_controltail == NULL) {
+ writel (ed, &ohci->regs->ed_controlhead);
+ } else {
+ ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_controltail;
+ if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_controltail = edi;
+ break;
+
+ case PIPE_BULK:
+ ed->hwNextED = 0;
+ if (ohci->ed_bulktail == NULL) {
+ writel (ed, &ohci->regs->ed_bulkhead);
+ } else {
+ ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_bulktail;
+ if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_bulktail = edi;
+ break;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_controltail == ed) {
+ ohci->ed_controltail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_BULK:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_bulktail == ed) {
+ ohci->ed_bulktail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+ }
+ ed->state = ED_UNLINK;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+ td_t *td;
+ ed_t *ed_ret;
+ volatile ed_t *ed;
+
+ ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+ (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+ if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+ err("ep_add_ed: pending delete");
+ /* pending delete request */
+ return NULL;
+ }
+
+ if (ed->state == ED_NEW) {
+ ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
+ /* dummy td; end of td list for ed */
+ td = td_alloc (usb_dev);
+ ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
+ ed->hwHeadP = ed->hwTailP;
+ ed->state = ED_UNLINK;
+ ed->type = usb_pipetype (pipe);
+ ohci_dev.ed_cnt++;
+ }
+
+ ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
+ | usb_pipeendpoint (pipe) << 7
+ | (usb_pipeisoc (pipe)? 0x8000: 0)
+ | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+ | usb_pipeslow (pipe) << 13
+ | usb_maxpacket (usb_dev, pipe) << 16);
+
+ return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+ void *data, int len,
+ struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+ volatile td_t *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+ int i;
+#endif
+
+ if (index > urb_priv->length) {
+ err("index > length");
+ return;
+ }
+ /* use this td as the next dummy */
+ td_pt = urb_priv->td [index];
+ td_pt->hwNextTD = 0;
+
+ /* fill the old dummy TD */
+ td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
+
+ td->ed = urb_priv->ed;
+ td->next_dl_td = NULL;
+ td->index = index;
+ td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+ if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
+ for (i = 0; i < len; i++)
+ printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+ printf("\n");
+ }
+#endif
+ if (!len)
+ data = 0;
+
+ td->hwINFO = ohci_cpu_to_le32 (info);
+ td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
+ if (data)
+ td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
+ else
+ td->hwBE = 0;
+ td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
+
+ /* append to queue */
+ td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+ ohci_t *ohci = &gohci;
+ int data_len = transfer_len;
+ void *data;
+ int cnt = 0;
+ __u32 info = 0;
+ unsigned int toggle = 0;
+
+ /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+ toggle = TD_T_TOGGLE;
+ } else {
+ toggle = TD_T_DATA0;
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+ }
+ urb->td_cnt = 0;
+ if (data_len)
+ data = buffer;
+ else
+ data = 0;
+
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK:
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+ while(data_len > 4096) {
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+ data += 4096; data_len -= 4096; cnt++;
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+ cnt++;
+
+ if (!ohci->sleeping)
+ writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+ break;
+
+ case PIPE_CONTROL:
+ info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+ td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+ if (data_len > 0) {
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+ /* NOTE: mishandles transfers >8K, some >4K */
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+ td_fill (ohci, info, data, 0, dev, cnt++, urb);
+ if (!ohci->sleeping)
+ writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+ break;
+ }
+ if (urb->length != cnt)
+ dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+ __u32 tdINFO, tdBE, tdCBP;
+ urb_priv_t *lurb_priv = &urb_priv;
+
+ tdINFO = ohci_cpu_to_le32 (td->hwINFO);
+ tdBE = ohci_cpu_to_le32 (td->hwBE);
+ tdCBP = ohci_cpu_to_le32 (td->hwCBP);
+
+
+ if (!(usb_pipecontrol(lurb_priv->pipe) &&
+ ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+ if (tdBE != 0) {
+ if (td->hwCBP == 0)
+ lurb_priv->actual_length += tdBE - td->data + 1;
+ else
+ lurb_priv->actual_length += tdCBP - td->data;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+ __u32 td_list_hc;
+ td_t *td_rev = NULL;
+ td_t *td_list = NULL;
+ urb_priv_t *lurb_priv = NULL;
+
+ td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
+ ohci->hcca->done_head = 0;
+
+ while (td_list_hc) {
+ td_list = (td_t *)td_list_hc;
+
+ if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
+ lurb_priv = &urb_priv;
+ dbg(" USB-error/status: %x : %p",
+ TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
+ if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
+ if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+ td_list->ed->hwHeadP =
+ (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
+ (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
+ lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+ } else
+ td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
+ }
+ td_list->hwNextTD = 0;
+ }
+
+ td_list->next_dl_td = td_rev;
+ td_rev = td_list;
+ td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
+ }
+ return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+ td_t *td_list_next = NULL;
+ ed_t *ed;
+ int cc = 0;
+ int stat = 0;
+ /* urb_t *urb; */
+ urb_priv_t *lurb_priv;
+ __u32 tdINFO, edHeadP, edTailP;
+
+ while (td_list) {
+ td_list_next = td_list->next_dl_td;
+
+ lurb_priv = &urb_priv;
+ tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
+
+ ed = td_list->ed;
+
+ dl_transfer_length(td_list);
+
+ /* error code of transfer */
+ cc = TD_CC_GET (tdINFO);
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+ if ((ed->state & (ED_OPER | ED_UNLINK))
+ && (lurb_priv->state != URB_DEL)) {
+ dbg("ConditionCode %#x", cc);
+ stat = cc_to_error[cc];
+ urb_finished = 1;
+ }
+ }
+
+ if (ed->state != ED_NEW) {
+ edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
+ edTailP = ohci_cpu_to_le32 (ed->hwTailP);
+
+ /* unlink eds if they are not busy */
+ if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+ ep_unlink (ohci, ed);
+ }
+
+ td_list = td_list_next;
+ }
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'O', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x) len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT roothub_status(&gohci)
+#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+ __u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) &&
+ ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ void * data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u32 datab[4];
+ __u8 *data_buf = (__u8 *)datab;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#endif
+ if (usb_pipeint(pipe)) {
+ info("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = m16_swap (cmd->value);
+ wIndex = m16_swap (cmd->index);
+ wLength = m16_swap (cmd->length);
+
+ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+ dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(__u16 *) data_buf = m16_swap (1); OK (2);
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (
+ RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+ OK (4);
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL): OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ OK(0);
+ case (RH_C_HUB_OVER_CURRENT):
+ WR_RH_STAT(RH_HS_OCIC); OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+ case (RH_C_PORT_CONNECTION):
+ WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+ case (RH_C_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+ case (RH_C_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+ case (RH_C_PORT_OVER_CURRENT):
+ WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+ case (RH_C_PORT_RESET):
+ WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+ case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PRS);
+ OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+ case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PES );
+ OK (0);
+ }
+ break;
+
+ case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des; OK(len);
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des; OK(len);
+ case (0x03): /* string descriptors */
+ if(wValue==0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ OK(len);
+ }
+ if(wValue==0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ OK(len);
+ }
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = roothub_a (&gohci);
+
+ data_buf [0] = 9; /* min length; */
+ data_buf [1] = 0x29;
+ data_buf [2] = temp & RH_A_NDP;
+ data_buf [3] = 0;
+ if (temp & RH_A_PSM) /* per-port power switching? */
+ data_buf [3] |= 0x1;
+ if (temp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf [3] |= 0x10;
+ else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
+ data_buf [3] |= 0x8;
+
+ /* corresponds to data_buf[4-7] */
+ datab [1] = 0;
+ data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+ temp = roothub_b (&gohci);
+ data_buf [7] = temp & RH_B_DR;
+ if (data_buf [2] < 7) {
+ data_buf [8] = 0xff;
+ } else {
+ data_buf [0] += 2;
+ data_buf [8] = (temp & RH_B_DR) >> 8;
+ data_buf [10] = data_buf [9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf [0], wLength));
+ OK (len);
+ }
+
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+
+ default:
+ dbg ("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+
+ len = min_t(int, len, leni);
+ if (data != data_buf)
+ memcpy (data, data_buf, len);
+ dev->act_len = len;
+ dev->status = stat;
+
+#ifdef DEBUG
+ if (transfer_len)
+ urb_priv.actual_length = transfer_len;
+ pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#endif
+
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ int stat = 0;
+ int maxsize = usb_maxpacket(dev, pipe);
+ int timeout;
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_common_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+
+ if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+ err("sohci_submit_job failed");
+ return -1;
+ }
+
+ /* allow more time for a BULK device to react - some are slow */
+#define BULK_TO 5000 /* timeout in milliseconds */
+ if (usb_pipebulk(pipe))
+ timeout = BULK_TO;
+ else
+ timeout = 100;
+
+ /* wait for it to complete */
+ for (;;) {
+ /* check whether the controller is done */
+ stat = hc_interrupt();
+ if (stat < 0) {
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+ /* 0xff is returned for an SF-interrupt */
+ break;
+ }
+
+ if (--timeout) {
+ wait_ms(1);
+ if (!urb_finished)
+ dbg("\%");
+
+ } else {
+ err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ stat = USB_ST_CRC_ERR;
+ urb_finished = 1;
+ break;
+ }
+ }
+#if 0
+ /* we got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+ got_rhsc = 0;
+ /* abuse timeout */
+ timeout = rh_check_port_status(&gohci);
+ if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+ /* the called routine adds 1 to the passed value */
+ usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+ /*
+ * XXX
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+#endif
+
+ dev->status = stat;
+ dev->act_len = transfer_len;
+
+#ifdef DEBUG
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#endif
+
+ /* free TDs in urb_priv */
+ urb_free_priv (&urb_priv);
+ return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ info("submit_bulk_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ int maxsize = usb_maxpacket(dev, pipe);
+
+ info("submit_control_msg");
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_control_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+ gohci.rh.dev = dev;
+ /* root hub - redirect */
+ return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+
+ return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ info("submit_int_msg");
+ return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+ int timeout = 30;
+ int smm_timeout = 50; /* 0,5 sec */
+
+ if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+ writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+ info("USB HC TakeOver from SMM");
+ while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+ wait_ms (10);
+ if (--smm_timeout == 0) {
+ err("USB HC TakeOver failed!");
+ return -1;
+ }
+ }
+ }
+
+ /* Disable HC interrupts */
+ writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+ dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+ ohci->slot_name,
+ readl (&ohci->regs->control));
+
+ /* Reset USB (needed by some controllers) */
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* HC Reset requires max 10 us delay */
+ writel (OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ if (--timeout == 0) {
+ err("USB HC reset timed out!");
+ return -1;
+ }
+ udelay (1);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+ __u32 mask;
+ unsigned int fminterval;
+
+ ohci->disabled = 1;
+
+ /* Tell the controller where the control and bulk lists are
+ * The lists are empty now. */
+
+ writel (0, &ohci->regs->ed_controlhead);
+ writel (0, &ohci->regs->ed_bulkhead);
+
+ writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+ fminterval = 0x2edf;
+ writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+ writel (fminterval, &ohci->regs->fminterval);
+ writel (0x628, &ohci->regs->lsthresh);
+
+ /* start controller operations */
+ ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci->disabled = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* disable all interrupts */
+ mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+ OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+ OHCI_INTR_OC | OHCI_INTR_MIE);
+ writel (mask, &ohci->regs->intrdisable);
+ /* clear all interrupts */
+ mask &= ~OHCI_INTR_MIE;
+ writel (mask, &ohci->regs->intrstatus);
+ /* Choose the interrupts we care about now - but w/o MIE */
+ mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+ writel (mask, &ohci->regs->intrenable);
+
+#ifdef OHCI_USE_NPS
+ /* required for AMD-756 and some Mac platforms */
+ writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+ &ohci->regs->roothub.a);
+ writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+ /* POTPGT delay is bits 24-31, in 2 ms units. */
+ mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+ /* connect the virtual root hub */
+ ohci->rh.devnum = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+ ohci_t *ohci = &gohci;
+ struct ohci_regs *regs = ohci->regs;
+ int ints;
+ int stat = -1;
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
+
+ ints = OHCI_INTR_WDH;
+
+ } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+
+ } else if ((ints &= readl (®s->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+
+ /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+ if (ints & OHCI_INTR_RHSC) {
+ got_rhsc = 1;
+ stat = 0xff;
+ }
+
+ if (ints & OHCI_INTR_UE) {
+ ohci->disabled++;
+ err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+ ohci->slot_name);
+ /* e.g. due to PCI Master/Target Abort */
+
+#ifdef DEBUG
+ ohci_dump (ohci, 1);
+#endif
+ /* FIXME: be optimistic, hope that bug won't repeat often. */
+ /* Make some non-interrupt context restart the controller. */
+ /* Count and limit the retries though; either hardware or */
+ /* software errors can go forever... */
+ hc_reset (ohci);
+ return -1;
+ }
+
+ if (ints & OHCI_INTR_WDH) {
+ writel (OHCI_INTR_WDH, ®s->intrdisable);
+ stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+ writel (OHCI_INTR_WDH, ®s->intrenable);
+ }
+
+ if (ints & OHCI_INTR_SO) {
+ dbg("USB Schedule overrun\n");
+ writel (OHCI_INTR_SO, ®s->intrenable);
+ stat = -1;
+ }
+
+ /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
+ if (ints & OHCI_INTR_SF) {
+ unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
+ wait_ms(1);
+ writel (OHCI_INTR_SF, ®s->intrdisable);
+ if (ohci->ed_rm_list[frame] != NULL)
+ writel (OHCI_INTR_SF, ®s->intrenable);
+ stat = 0xff;
+ }
+
+ writel (ints, ®s->intrstatus);
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+ dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+ if (!ohci->disabled)
+ hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+
+ /* Set the USB Clock */
+ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
+
+#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
+ /* remove all PSC3 USB bits first before ORing in ours */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
+#else
+ /* remove all USB bits first before ORing in ours */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
+#endif
+ /* Activate USB port */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
+
+ memset (&gohci, 0, sizeof (ohci_t));
+ memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+ /* align the storage */
+ if ((__u32)&ghcca[0] & 0xff) {
+ err("HCCA not aligned!!");
+ return -1;
+ }
+ phcca = &ghcca[0];
+ info("aligned ghcca %p", phcca);
+ memset(&ohci_dev, 0, sizeof(struct ohci_device));
+ if ((__u32)&ohci_dev.ed[0] & 0x7) {
+ err("EDs not aligned!!");
+ return -1;
+ }
+ memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+ if ((__u32)gtd & 0x7) {
+ err("TDs not aligned!!");
+ return -1;
+ }
+ ptd = gtd;
+ gohci.hcca = phcca;
+ memset (phcca, 0, sizeof (struct ohci_hcca));
+
+ gohci.disabled = 1;
+ gohci.sleeping = 0;
+ gohci.irq = -1;
+ gohci.regs = (struct ohci_regs *)MPC5XXX_USB;
+
+ gohci.flags = 0;
+ gohci.slot_name = "mpc5200";
+
+ if (hc_reset (&gohci) < 0) {
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+ if (hc_start (&gohci) < 0) {
+ err ("can't start usb-%s", gohci.slot_name);
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+#ifdef DEBUG
+ ohci_dump (&gohci, 1);
+#endif
+ ohci_inited = 1;
+ urb_finished = 1;
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ /* this gets called really early - before the controller has */
+ /* even been initialized! */
+ if (!ohci_inited)
+ return 0;
+ /* TODO release any interrupts, etc. */
+ /* call hc_release_ohci() here ? */
+ hc_reset (&gohci);
+ return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
+#define ED_OPER 0x02
+#define ED_DEL 0x04
+#define ED_URB_DEL 0x08
+
+/* usb_ohci_ed */
+struct ed {
+ __u32 hwINFO;
+ __u32 hwTailP;
+ __u32 hwHeadP;
+ __u32 hwNextED;
+
+ struct ed *ed_prev;
+ __u8 int_period;
+ __u8 int_branch;
+ __u8 int_load;
+ __u8 int_interval;
+ __u8 state;
+ __u8 type;
+ __u16 last_iso;
+ struct ed *ed_rm_list;
+
+ struct usb_device *usb_dev;
+ __u32 unused[3];
+} __attribute__((aligned(16)));
+typedef struct ed ed_t;
+
+
+/* TD info field */
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
+
+
+#define MAXPSW 1
+
+struct td {
+ __u32 hwINFO;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
+ struct usb_device *usb_dev;
+ int transfer_len;
+ __u32 data;
+
+ __u32 unused2[2];
+} __attribute__((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP (1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of. It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32 /* part of the OHCI standard */
+struct ohci_hcca {
+ __u32 int_table[NUM_INTS]; /* Interrupt ED table */
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+ __u32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc[116];
+} __attribute__((aligned(256)));
+
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region. This is Memory Mapped I/O. You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+ /* control and status registers */
+ __u32 revision;
+ __u32 control;
+ __u32 cmdstatus;
+ __u32 intrstatus;
+ __u32 intrenable;
+ __u32 intrdisable;
+ /* memory pointers */
+ __u32 hcca;
+ __u32 ed_periodcurrent;
+ __u32 ed_controlhead;
+ __u32 ed_controlcurrent;
+ __u32 ed_bulkhead;
+ __u32 ed_bulkcurrent;
+ __u32 donehead;
+ /* frame counters */
+ __u32 fminterval;
+ __u32 fmremaining;
+ __u32 fmnumber;
+ __u32 periodicstart;
+ __u32 lsthresh;
+ /* Root hub ports */
+ struct ohci_roothub_regs {
+ __u32 a;
+ __u32 b;
+ __u32 status;
+ __u32 portstatus[MAX_ROOT_PORTS];
+ } roothub;
+} __attribute__((aligned(32)));
+
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *dev; /* was urb */
+ void *int_addr;
+ int send;
+ int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct
+{
+ ed_t *ed;
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
+ int state;
+ unsigned long pipe;
+ int actual_length;
+ td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+
+typedef struct ohci {
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma;*/
+
+ int irq;
+ int disabled; /* e.g. got a UE, we're hung */
+ int sleeping;
+ unsigned long flags; /* for HC bugs */
+
+ struct ohci_regs *regs; /* OHCI controller's memory */
+
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
+ int intrstatus;
+ __u32 hc_control; /* copy of the hc control reg */
+ struct usb_device *dev[32];
+ struct virt_root_hub rh;
+
+ const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+ ed_t ed[NUM_EDS];
+ int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD+1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *
+td_alloc (struct usb_device *usb_dev)
+{
+ int i;
+ struct td *td;
+
+ td = NULL;
+ for (i = 0; i < NUM_TD; i++)
+ {
+ if (ptd[i].usb_dev == NULL)
+ {
+ td = &ptd[i];
+ td->usb_dev = usb_dev;
+ break;
+ }
+ }
+
+ return td;
+}
+
+static inline void
+ed_free (struct ed *ed)
+{
+ ed->usb_dev = NULL;
+}
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+SOBJS = io.o fec_dma_tasks.o
+COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
+ interrupts.o loadtask.o speed.o \
+ traps.o uart.o pci.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
+ -mstring -mcpu=603e -mmultiple
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8220/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC8220 CPUs
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8220.h>
+#include <netdev.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+
+ puts ("CPU: ");
+
+ printf (CPU_ID_STR);
+
+ printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
+
+ printf (" at %s MHz\n", strmhz (buf, clock));
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR;
+ ulong msr;
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /* Charge the watchdog timer */
+ gptmr->Prescl = 10;
+ gptmr->Count = 1;
+
+ gptmr->Mode = GPT_TMS_SGPIO;
+
+ gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE;
+
+ return 1;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return (tbclk);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_MPC8220_FEC)
+ mpc8220_fec_initialize(bis);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ */
+void cpu_init_f (void)
+{
+ volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
+ volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
+ volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* Clear all port configuration */
+ portcfg->pcfg0 = 0;
+ portcfg->pcfg1 = 0;
+ portcfg->pcfg2 = 0;
+ portcfg->pcfg3 = 0;
+ portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
+ portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
+
+ /*
+ * Flexbus Controller: configure chip selects and enable them
+ */
+#if defined (CONFIG_SYS_CS0_BASE)
+ flexbus->csar0 = CONFIG_SYS_CS0_BASE;
+
+/* Sorcery-C can hang-up after CTRL reg initialization */
+#if defined (CONFIG_SYS_CS0_CTRL)
+ flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
+#endif
+ flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CONFIG_SYS_CS1_BASE)
+ flexbus->csar1 = CONFIG_SYS_CS1_BASE;
+ flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
+ flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CONFIG_SYS_CS2_BASE)
+ flexbus->csar2 = CONFIG_SYS_CS2_BASE;
+ flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
+ flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CONFIG_SYS_CS3_BASE)
+ flexbus->csar3 = CONFIG_SYS_CS3_BASE;
+ flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
+ flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CONFIG_SYS_CS4_BASE)
+ flexbus->csar4 = CONFIG_SYS_CS4_BASE;
+ flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
+ flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+#if defined (CONFIG_SYS_CS5_BASE)
+ flexbus->csar5 = CONFIG_SYS_CS5_BASE;
+ flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
+ flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
+ portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
+ __asm__ volatile ("sync");
+#endif
+
+ /* This section of the code cannot place in cpu_init_r(),
+ it will cause the system to hang */
+ /* enable timebase */
+ xlbarb->addrTenTimeOut = 0x1000;
+ xlbarb->dataTenTimeOut = 0x1000;
+ xlbarb->busActTimeOut = 0x2000;
+
+ xlbarb->config = 0x00002000;
+
+ /* Master Priority Enable */
+ xlbarb->mastPriority = 0;
+ xlbarb->mastPriEn = 0xff;
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+ /* this may belongs to disable interrupt section */
+ /* mask all interrupts */
+ *(vu_long *) 0xf0000700 = 0xfffffc00;
+ *(vu_long *) 0xf0000714 |= 0x0001ffff;
+ *(vu_long *) 0xf0000710 &= ~0x00000f00;
+
+ /* route critical ints to normal ints */
+ *(vu_long *) 0xf0000710 |= 0x00000001;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
+ /* load FEC microcode */
+ loadtask (0, 2);
+#endif
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on code
+ * (C) Copyright Motorola, Inc., 2000
+ *
+ * MPC8220 dma header file
+ */
+
+#ifndef __MPC8220_DMA_H
+#define __MPC8220_DMA_H
+
+#include <common.h>
+#include <mpc8220.h>
+
+/* Task number assignment */
+#define FEC_RECV_TASK_NO 0
+#define FEC_XMIT_TASK_NO 1
+
+/*---------------------------------------------------------------------
+ * Stuff for Ethernet Tx/Rx tasks
+ *---------------------------------------------------------------------
+ */
+
+/* Layout of Ethernet controller Parameter SRAM area:
+ * ----------------------------------------------------------------
+ * 0x00: TBD_BASE, base address of TX BD ring
+ * 0x04: TBD_NEXT, address of next TX BD to be processed
+ * 0x08: RBD_BASE, base address of RX BD ring
+ * 0x0C: RBD_NEXT, address of next RX BD to be processed
+ * ---------------------------------------------------------------
+ * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
+ */
+
+/* base address of SRAM area to store parameters used by Ethernet tasks */
+#define FEC_PARAM_BASE (MMAP_SRAM + 0x5b00)
+
+/* base address of SRAM area for buffer descriptors */
+#define FEC_BD_BASE (MMAP_SRAM + 0x5b20)
+
+/*---------------------------------------------------------------------
+ * common shortcuts used by driver C code
+ *---------------------------------------------------------------------
+ */
+
+/* Disable SmartDMA task */
+#define DMA_TASK_DISABLE(tasknum) \
+{ \
+ volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \
+ *tcr = (*tcr) & (~0x8000); \
+}
+
+/* Enable SmartDMA task */
+#define DMA_TASK_ENABLE(tasknum) \
+{ \
+ volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\
+ *tcr = (*tcr) | 0x8000; \
+}
+
+/* Clear interrupt pending bits */
+#define DMA_CLEAR_IEVENT(tasknum) \
+{ \
+ struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA; \
+ dma->IntPend = (1 << tasknum); \
+}
+
+#endif /* __MPC8220_DMA_H */
--- /dev/null
+/*
+ * (C) Copyright 2004, Freescale, Inc
+ * TsiChung Liew, Tsi-Chung.Liew@freescale.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+DESCRIPTION
+Read Dram spd and base on its information to calculate the memory size,
+characteristics to initialize the dram on MPC8220
+*/
+
+#include <common.h>
+#include <mpc8220.h>
+#include "i2cCore.h"
+#include "dramSetup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
+#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
+#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
+
+int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
+{
+ int i;
+
+ for (i = 0; i < I2C_POLL_COUNT; i++) {
+ if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
+ return (OK);
+ }
+
+ return (ERROR);
+}
+
+int spd_clear (volatile i2c8220_t * pi2c)
+{
+ pi2c->adr = 0;
+ pi2c->fdr = 0;
+ pi2c->cr = 0;
+ pi2c->sr = 0;
+
+ return (OK);
+}
+
+int spd_stop (volatile i2c8220_t * pi2c)
+{
+ pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
+ if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
+ return ERROR;
+
+ return (OK);
+}
+
+int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
+{
+ pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
+ *readb = pi2c->dr; /* Read a byte */
+
+ /*
+ Set I2C_CTRL_TXAK will cause Transfer pending and
+ set I2C_CTRL_STA will cause Interrupt pending
+ */
+ if (*index != 2) {
+ if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
+ return ERROR;
+ }
+
+ if (*index != 1) {
+ if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
+ return ERROR;
+ }
+
+ return (OK);
+}
+
+int readSpdData (u8 * spdData)
+{
+ volatile i2c8220_t *pi2cReg;
+ volatile pcfg8220_t *pcfg;
+ u8 slvAdr = DRAM_SPD;
+ u8 Tmp;
+ int Length = SPD_SIZE;
+ int i = 0;
+
+ /* Enable Port Configuration for SDA and SDL signals */
+ pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
+ __asm__ ("sync");
+ pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
+ __asm__ ("sync");
+
+ /* Points the structure to I2c mbar memory offset */
+ pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
+
+
+ /* Clear FDR, ADR, SR and CR reg */
+ pi2cReg->adr = 0;
+ pi2cReg->fdr = 0;
+ pi2cReg->cr = 0;
+ pi2cReg->sr = 0;
+
+ /* Set for fix XLB Bus Frequency */
+ switch (gd->bus_clk) {
+ case 60000000:
+ pi2cReg->fdr = 0x15;
+ break;
+ case 70000000:
+ pi2cReg->fdr = 0x16;
+ break;
+ case 80000000:
+ pi2cReg->fdr = 0x3a;
+ break;
+ case 90000000:
+ pi2cReg->fdr = 0x17;
+ break;
+ case 100000000:
+ pi2cReg->fdr = 0x3b;
+ break;
+ case 110000000:
+ pi2cReg->fdr = 0x18;
+ break;
+ case 120000000:
+ pi2cReg->fdr = 0x19;
+ break;
+ case 130000000:
+ pi2cReg->fdr = 0x1a;
+ break;
+ }
+
+ pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
+
+ pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
+
+ /*
+ The I2C bus should be in Idle state. If the bus is busy,
+ clear the STA bit in control register
+ */
+ if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
+ if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
+ pi2cReg->cr &= ~I2C_CTL_STA;
+
+ /* Check again if it is still busy, return error if found */
+ if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
+ return ERROR;
+ }
+
+ pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
+ pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
+
+ if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
+ return ERROR;
+
+
+ /* Write slave address */
+ pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
+ pi2cReg->dr = slvAdr; /* Write a byte */
+
+ if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+ if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+
+ /* Issue the offset to start */
+ pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
+ pi2cReg->dr = 0; /* Write a byte */
+
+ if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+ if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+
+ /* Set repeat start */
+ pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
+
+ pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
+ pi2cReg->dr = slvAdr | 1; /* Write a byte */
+
+ if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+ if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+ if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
+ return ERROR;
+
+ pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
+
+ if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
+ return ERROR;
+
+ /* Dummy Read */
+ if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
+ spd_stop (pi2cReg);
+ return ERROR;
+ }
+
+ i = 0;
+ while (Length) {
+ if (Length == 2)
+ pi2cReg->cr |= I2C_CTL_TXAK;
+
+ if (Length == 1)
+ pi2cReg->cr &= ~I2C_CTL_STA;
+
+ if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
+ return spd_stop (pi2cReg);
+ }
+ i++;
+ Length--;
+ spdData++;
+ }
+
+ /* Stop the service */
+ spd_stop (pi2cReg);
+
+ return OK;
+}
+
+int getBankInfo (int bank, draminfo_t * pBank)
+{
+ int status;
+ int checksum;
+ int count;
+ u8 spdData[SPD_SIZE];
+
+
+ if (bank > 2 || pBank == 0) {
+ /* illegal values */
+ return (-42);
+ }
+
+ status = readSpdData (&spdData[0]);
+ if (status < 0)
+ return (-1);
+
+ /* check the checksum */
+ for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
+ checksum += spdData[count];
+
+ checksum = checksum - ((checksum / 256) * 256);
+
+ if (checksum != spdData[LOC_CHECKSUM])
+ return (-2);
+
+ /* Get the memory type */
+ if (!
+ ((spdData[LOC_TYPE] == TYPE_DDR)
+ || (spdData[LOC_TYPE] == TYPE_SDR)))
+ /* not one of the types we support */
+ return (-3);
+
+ pBank->type = spdData[LOC_TYPE];
+
+ /* Set logical banks */
+ pBank->banks = spdData[LOC_LOGICAL_BANKS];
+
+ /* Check that we have enough physical banks to cover the bank we are
+ * figuring out. Odd-numbered banks correspond to the second bank
+ * on the device.
+ */
+ if (bank & 1) {
+ /* Second bank of a "device" */
+ if (spdData[LOC_PHYS_BANKS] < 2)
+ /* this bank doesn't exist on the "device" */
+ return (-4);
+
+ if (spdData[LOC_ROWS] & 0xf0)
+ /* Two asymmetric banks */
+ pBank->rows = spdData[LOC_ROWS] >> 4;
+ else
+ pBank->rows = spdData[LOC_ROWS];
+
+ if (spdData[LOC_COLS] & 0xf0)
+ /* Two asymmetric banks */
+ pBank->cols = spdData[LOC_COLS] >> 4;
+ else
+ pBank->cols = spdData[LOC_COLS];
+ } else {
+ /* First bank of a "device" */
+ pBank->rows = spdData[LOC_ROWS];
+ pBank->cols = spdData[LOC_COLS];
+ }
+
+ pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
+ pBank->bursts = spdData[LOC_BURSTS];
+ pBank->CAS = spdData[LOC_CAS];
+ pBank->CS = spdData[LOC_CS];
+ pBank->WE = spdData[LOC_WE];
+ pBank->Trp = spdData[LOC_Trp];
+ pBank->Trcd = spdData[LOC_Trcd];
+ pBank->buffered = spdData[LOC_Buffered] & 1;
+ pBank->refresh = spdData[LOC_REFRESH];
+
+ return (0);
+}
+
+
+/* checkMuxSetting -- given a row/column device geometry, return a mask
+ * of the valid DRAM controller addr_mux settings for
+ * that geometry.
+ *
+ * Arguments: u8 rows: number of row addresses in this device
+ * u8 columns: number of column addresses in this device
+ *
+ * Returns: a mask of the allowed addr_mux settings for this
+ * geometry. Each bit in the mask represents a
+ * possible addr_mux settings (for example, the
+ * (1<<2) bit in the mask represents the 0b10 setting)/
+ *
+ */
+u8 checkMuxSetting (u8 rows, u8 columns)
+{
+ muxdesc_t *pIdx, *pMux;
+ u8 mask;
+ int lrows, lcolumns;
+ u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
+
+ /* Setup MuxDescriptor in SRAM space */
+ /* MUXDESC AddressRuns [] = {
+ { 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
+ { 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
+ { 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
+ { 0xff } / list terminator /
+ }; */
+
+ pIdx = (muxdesc_t *) & mux[0];
+
+ /* Check rows x columns against each possible address mux setting */
+ for (pMux = pIdx, mask = 0;; pMux++) {
+ lrows = rows;
+ lcolumns = columns;
+
+ if (pMux->MuxValue == 0xff)
+ break; /* end of list */
+
+ /* For a given mux setting, since we want all the memory in a
+ * device to be contiguous, we want the device "use up" the
+ * address lines such that there are no extra column or row
+ * address lines on the device.
+ */
+
+ lcolumns -= pMux->Columns;
+ if (lcolumns < 0)
+ /* Not enough columns to get to the rows */
+ continue;
+
+ lrows -= pMux->Rows;
+ if (lrows > 0)
+ /* we have extra rows left -- can't do that! */
+ continue;
+
+ /* At this point, we either have to have used up all the
+ * rows or we have to have no columns left.
+ */
+
+ if (lcolumns != 0 && lrows != 0)
+ /* rows AND columns are left. Bad! */
+ continue;
+
+ lcolumns -= pMux->MoreColumns;
+
+ if (lcolumns <= 0)
+ mask |= (1 << pMux->MuxValue);
+ }
+
+ return (mask);
+}
+
+
+u32 dramSetup (void)
+{
+ draminfo_t DramInfo[TOTAL_BANK];
+ draminfo_t *pDramInfo;
+ u32 size, temp, cfg_value, mode_value, refresh;
+ u8 *ptr;
+ u8 bursts, Trp, Trcd, type, buffered;
+ u8 muxmask, rows, columns;
+ int count, banknum;
+ u32 *prefresh, *pIdx;
+ u32 refrate[8] = { 15625, 3900, 7800, 31300,
+ 62500, 125000, 0xffffffff, 0xffffffff
+ };
+ volatile sysconf8220_t *sysconf;
+ volatile memctl8220_t *memctl;
+
+ sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
+ memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
+
+ /* Set everything in the descriptions to zero */
+ ptr = (u8 *) & DramInfo[0];
+ for (count = 0; count < sizeof (DramInfo); count++)
+ *ptr++ = 0;
+
+ for (banknum = 0; banknum < TOTAL_BANK; banknum++)
+ sysconf->cscfg[banknum];
+
+ /* Descriptions of row/column address muxing for various
+ * addr_mux settings.
+ */
+
+ pIdx = prefresh = (u32 *) & refrate[0];
+
+ /* Get all the info for all three logical banks */
+ bursts = 0xff;
+ Trp = 0;
+ Trcd = 0;
+ type = 0;
+ buffered = 0xff;
+ refresh = 0xffffffff;
+ muxmask = 0xff;
+
+ /* Two bank, CS0 and CS1 */
+ for (banknum = 0, pDramInfo = &DramInfo[0];
+ banknum < TOTAL_BANK; banknum++, pDramInfo++) {
+ pDramInfo->ordinal = banknum; /* initial sorting */
+ if (getBankInfo (banknum, pDramInfo) < 0)
+ continue;
+
+ /* get cumulative parameters of all three banks */
+ if (type && pDramInfo->type != type)
+ return 0;
+
+ type = pDramInfo->type;
+ rows = pDramInfo->rows;
+ columns = pDramInfo->cols;
+
+ /* This chip only supports 13 DRAM memory lines, but some devices
+ * have 14 rows. To deal with this, ignore the 14th address line
+ * by limiting the number of rows (and columns) to 13. This will
+ * mean that for 14-row devices we will only be able to use
+ * half of the memory, but it's better than nothing.
+ */
+ if (rows > 13)
+ rows = 13;
+ if (columns > 13)
+ columns = 13;
+
+ pDramInfo->size =
+ ((1 << (rows + columns)) * pDramInfo->width);
+ pDramInfo->size *= pDramInfo->banks;
+ pDramInfo->size >>= 3;
+
+ /* figure out which addr_mux configurations will support this device */
+ muxmask &= checkMuxSetting (rows, columns);
+ if (muxmask == 0)
+ return 0;
+
+ buffered = pDramInfo->buffered;
+ bursts &= pDramInfo->bursts; /* union of all bursts */
+ if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
+ Trp = pDramInfo->Trp;
+
+ if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
+ Trcd = pDramInfo->Trcd;
+
+ prefresh = pIdx;
+ /* worst case (shortest) Refresh period */
+ if (refresh > prefresh[pDramInfo->refresh & 7])
+ refresh = prefresh[pDramInfo->refresh & 7];
+
+ } /* for loop */
+
+
+ /* We only allow a burst length of 8! */
+ if (!(bursts & 8))
+ bursts = 8;
+
+ /* Sort the devices. In order to get each chip select region
+ * aligned properly, put the biggest device at the lowest address.
+ * A simple bubble sort will do the trick.
+ */
+ for (banknum = 0, pDramInfo = &DramInfo[0];
+ banknum < TOTAL_BANK; banknum++, pDramInfo++) {
+ int i;
+
+ for (i = 0; i < TOTAL_BANK; i++) {
+ if (pDramInfo->size < DramInfo[i].size &&
+ pDramInfo->ordinal < DramInfo[i].ordinal) {
+ /* If the current bank is smaller, but if the ordinal is also
+ * smaller, swap the ordinals
+ */
+ u8 temp8;
+
+ temp8 = DramInfo[i].ordinal;
+ DramInfo[i].ordinal = pDramInfo->ordinal;
+ pDramInfo->ordinal = temp8;
+ }
+ }
+ }
+
+
+ /* Now figure out the base address for each bank. While
+ * we're at it, figure out how much memory there is.
+ *
+ */
+ size = 0;
+ for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
+ int i;
+
+ for (i = 0; i < TOTAL_BANK; i++) {
+ if (DramInfo[i].ordinal == banknum
+ && DramInfo[i].size != 0) {
+ DramInfo[i].base = size;
+ size += DramInfo[i].size;
+ }
+ }
+ }
+
+ /* Set up the Drive Strength register */
+ sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
+
+ /* ********************** Cfg 1 ************************* */
+
+ /* Set the single read to read/write/precharge delay */
+ cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
+
+ /* Set the single write to read/write/precharge delay.
+ * This may or may not be correct. The controller spec
+ * says "tWR", but "tWR" does not appear in the SPD. It
+ * always seems to be 15nsec for the class of device we're
+ * using, which turns out to be 2 clock cycles at 133MHz,
+ * so that's what we're going to use.
+ *
+ * HOWEVER, because of a bug in the controller, for DDR
+ * we need to set this to be the same as the value
+ * calculated for bwt2rwp.
+ */
+ cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
+
+ /* Set the Read CAS latency. We're going to use a CL of
+ * 2.5 for DDR and 2 SDR.
+ */
+ cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
+
+
+ /* Set the Active to Read/Write delay. This depends
+ * on Trcd which is reported as nanoseconds times 4.
+ * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
+ * which gives us a dimensionless quantity. Play games with
+ * the divisions so we don't run out of dynamic ranges.
+ */
+ /* account for megaherz and the times 4 */
+ temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
+
+ /* account for nanoseconds and round up, with a minimum value of 2 */
+ temp = ((temp + 999) / 1000) - 1;
+ if (temp < 2)
+ temp = 2;
+
+ cfg_value |= CFG1_ACT2WR (temp);
+
+ /* Set the precharge to active delay. This depends
+ * on Trp which is reported as nanoseconds times 4.
+ * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
+ * which gives us a dimensionless quantity. Play games with
+ * the divisions so we don't run out of dynamic ranges.
+ */
+ /* account for megaherz and the times 4 */
+ temp = (Trp * (gd->bus_clk / 1000000)) / 4;
+
+ /* account for nanoseconds and round up, then subtract 1, with a
+ * minumum value of 1 and a maximum value of 7.
+ */
+ temp = (((temp + 999) / 1000) - 1) & 7;
+ if (temp < 1)
+ temp = 1;
+
+ cfg_value |= CFG1_PRE2ACT (temp);
+
+ /* Set refresh to active delay. This depends
+ * on Trfc which is not reported in the SPD.
+ * We'll use a nominal value of 75nsec which is
+ * what the controller spec uses.
+ */
+ temp = (75 * (gd->bus_clk / 1000000));
+ /* account for nanoseconds and round up, then subtract 1 */
+ cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
+
+ /* Set the write latency, using the values given in the controller spec */
+ cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
+ memctl->cfg1 = cfg_value; /* cfg 1 */
+ asm volatile ("sync");
+
+
+ /* ********************** Cfg 2 ************************* */
+
+ /* Set the burst read to read/precharge delay */
+ cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
+
+ /* Set the burst write to read/precharge delay. Semi-magic numbers
+ * based on the controller spec recommendations, assuming tWR is
+ * two clock cycles.
+ */
+ cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
+
+ /* Set the Burst read to write delay. Semi-magic numbers
+ * based on the DRAM controller documentation.
+ */
+ cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
+
+ /* Set the burst length -- must be 8!! Well, 7, actually, becuase
+ * it's burst lenght minus 1.
+ */
+ cfg_value |= CFG2_BURSTLEN (7);
+ memctl->cfg2 = cfg_value; /* cfg 2 */
+ asm volatile ("sync");
+
+
+ /* ********************** mode ************************* */
+
+ /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
+ * disable automatic refresh.
+ */
+ cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
+ ((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
+
+ /* Set the address mux based on whichever setting(s) is/are common
+ * to all the devices we have. If there is more than one, choose
+ * one arbitrarily.
+ */
+ if (muxmask & 0x4)
+ cfg_value |= CTL_ADDRMUX (2);
+ else if (muxmask & 0x2)
+ cfg_value |= CTL_ADDRMUX (1);
+ else
+ cfg_value |= CTL_ADDRMUX (0);
+
+ /* Set the refresh interval. */
+ temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
+ cfg_value |= CTL_REFRESH_INTERVAL (temp);
+
+ /* Set buffered/non-buffered memory */
+ if (buffered)
+ cfg_value |= CTL_BUFFERED;
+
+ memctl->ctrl = cfg_value; /* ctrl */
+ asm volatile ("sync");
+
+ if (type == TYPE_DDR) {
+ /* issue precharge all */
+ temp = cfg_value | CTL_PRECHARGE_CMD;
+ memctl->ctrl = temp; /* ctrl */
+ asm volatile ("sync");
+ }
+
+
+ /* Set up mode value for CAS latency */
+#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
+ mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
+ MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
+#else
+ mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
+ MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
+#endif
+ asm volatile ("sync");
+
+ /* Write Extended Mode - enable DLL */
+ if (type == TYPE_DDR) {
+ temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
+ MODE_X_DS_NORMAL | MODE_CMD;
+ memctl->mode = (temp >> 16); /* mode */
+ asm volatile ("sync");
+
+ /* Write Mode - reset DLL, set CAS latency */
+ temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
+ memctl->mode = (temp >> 16); /* mode */
+ asm volatile ("sync");
+ }
+
+ /* Program the chip selects. */
+ for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
+ if (DramInfo[banknum].size != 0) {
+ u32 mask;
+ int i;
+
+ for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
+ if (DramInfo[banknum].size & mask)
+ break;
+ }
+ temp = (DramInfo[banknum].base & 0xfff00000) | (i -
+ 1);
+
+ sysconf->cscfg[banknum] = temp;
+ asm volatile ("sync");
+ }
+ }
+
+ /* Wait for DLL lock */
+ udelay (200);
+
+ temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
+ memctl->ctrl = temp; /* ctrl */
+ asm volatile ("sync");
+
+ temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
+ memctl->ctrl = temp; /* ctrl */
+ asm volatile ("sync");
+
+ memctl->ctrl = temp; /* ctrl */
+ asm volatile ("sync");
+
+ /* Write Mode - DLL normal */
+ temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
+ memctl->mode = (temp >> 16); /* mode */
+ asm volatile ("sync");
+
+ /* Enable refresh, enable DQS's (if DDR), and lock the control register */
+ cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
+ cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
+
+ if (type == TYPE_DDR)
+ cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
+
+ memctl->ctrl = cfg_value; /* ctrl */
+ asm volatile ("sync");
+
+ return size;
+}
--- /dev/null
+/*
+ * dramSetup.h
+ *
+ * Prototypes, etc. for the Motorola MPC8220
+ * embedded cpu chips
+ *
+ * 2004 (c) Freescale, Inc.
+ * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __INCdramsetuph
+#define __INCdramsetuph
+#ifndef __ASSEMBLY__
+/* Where various things are in the SPD */
+#define LOC_TYPE 2
+#define LOC_CHECKSUM 63
+#define LOC_PHYS_BANKS 5
+#define LOC_LOGICAL_BANKS 17
+#define LOC_ROWS 3
+#define LOC_COLS 4
+#define LOC_WIDTH_HIGH 7
+#define LOC_WIDTH_LOW 6
+#define LOC_REFRESH 12
+#define LOC_BURSTS 16
+#define LOC_CAS 18
+#define LOC_CS 19
+#define LOC_WE 20
+#define LOC_Tcyc 9
+#define LOC_Tac 10
+#define LOC_Trp 27
+#define LOC_Trrd 28
+#define LOC_Trcd 29
+#define LOC_Tras 30
+#define LOC_Buffered 21
+/* Types of memory the SPD can tell us about.
+ * We can actually only use SDRAM and DDR.
+ */
+#define TYPE_DRAM 1 /* plain old dram */
+#define TYPE_EDO 2 /* EDO dram */
+#define TYPE_Nibble 3 /* serial nibble memory */
+#define TYPE_SDR 4 /* SDRAM */
+#define TYPE_ROM 5 /* */
+#define TYPE_SGRRAM 6 /* graphics memory */
+#define TYPE_DDR 7 /* DDR sdram */
+#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */
+#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */
+#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */
+#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */
+#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */
+#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */
+#define DRIVE_STRENGTH_HIGH 0
+#define DRIVE_STRENGTH_MED 1
+#define DRIVE_STRENGTH_LOW 2
+#define DRIVE_STRENGTH_OFF 3
+
+#define OK 0
+#define ERROR -1
+/* Structure to hold information about address muxing. */
+ typedef struct tagMuxDescriptor {
+ u8 MuxValue;
+ u8 Columns;
+ u8 Rows;
+ u8 MoreColumns;
+} muxdesc_t;
+
+/* Structure to define one physical bank of
+ * memory. Note that dram size in bytes is
+ * (2^^(rows+columns)) * width * banks / 8
+*/
+typedef struct tagDramInfo {
+ u32 size; /* size in bytes */
+ u32 base; /* base address */
+ u8 ordinal; /* where in the memory map will we put this */
+ u8 type;
+ u8 rows;
+ u8 cols;
+ u16 width; /* width of each chip in bits */
+ u8 banks; /* number of chips, aka logical banks */
+ u8 bursts; /* bit-encoded allowable burst length */
+ u8 CAS; /* bit-encoded CAS latency values */
+ u8 CS; /* bit-encoded CS latency values */
+ u8 WE; /* bit-encoded WE latency values */
+ u8 Trp; /* bit-encoded row precharge time */
+ u8 Trcd; /* bit-encoded RAS to CAS delay */
+ u8 buffered; /* buffered or not */
+ u8 refresh; /* encoded refresh rate */
+} draminfo_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __INCdramsetuph */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.c,
+ * (C) Copyright Motorola, Inc., 2000
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include "dma.h"
+#include "fec.h"
+
+#undef DEBUG
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_MPC8220_FEC)
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#ifdef DEBUG
+static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
+static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
+#endif /* DEBUG */
+
+#ifdef DEBUG
+static u32 local_crc32 (char *string, unsigned int crc_value, int len);
+#endif
+
+typedef struct {
+ u8 data[1500]; /* actual data */
+ int length; /* actual length */
+ int used; /* buffer in use or not */
+ u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
+} NBUF;
+
+int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
+int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);
+
+/********************************************************************/
+#ifdef DEBUG
+static void mpc8220_fec_phydump (char *devname)
+{
+ u16 phyStatus, i;
+ u8 phyAddr = CONFIG_PHY_ADDR;
+ u8 reg_mask[] = {
+#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
+ /* regs to print: 0...7, 16...19, 21, 23, 24 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+#else
+ /* regs to print: 0...8, 16...20 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+#endif
+ };
+
+ for (i = 0; i < 32; i++) {
+ if (reg_mask[i]) {
+ miiphy_read (devname, phyAddr, i, &phyStatus);
+ printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
+ }
+ }
+}
+#endif
+
+/********************************************************************/
+static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
+{
+ int ix;
+ char *data;
+ static int once = 0;
+
+ for (ix = 0; ix < FEC_RBD_NUM; ix++) {
+ if (!once) {
+ data = (char *) malloc (FEC_MAX_PKT_SIZE);
+ if (data == NULL) {
+ printf ("RBD INIT FAILED\n");
+ return -1;
+ }
+ fec->rbdBase[ix].dataPointer = (u32) data;
+ }
+ fec->rbdBase[ix].status = FEC_RBD_EMPTY;
+ fec->rbdBase[ix].dataLength = 0;
+ }
+ once++;
+
+ /*
+ * have the last RBD to close the ring
+ */
+ fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
+ fec->rbdIndex = 0;
+
+ return 0;
+}
+
+/********************************************************************/
+static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
+{
+ int ix;
+
+ for (ix = 0; ix < FEC_TBD_NUM; ix++) {
+ fec->tbdBase[ix].status = 0;
+ }
+
+ /*
+ * Have the last TBD to close the ring
+ */
+ fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
+
+ /*
+ * Initialize some indices
+ */
+ fec->tbdIndex = 0;
+ fec->usedTbdIndex = 0;
+ fec->cleanTbdNum = FEC_TBD_NUM;
+}
+
+/********************************************************************/
+static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
+{
+ /*
+ * Reset buffer descriptor as empty
+ */
+ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
+ pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
+ else
+ pRbd->status = FEC_RBD_EMPTY;
+
+ pRbd->dataLength = 0;
+
+ /*
+ * Now, we have an empty RxBD, restart the SmartDMA receive task
+ */
+ DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
+
+ /*
+ * Increment BD count
+ */
+ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
+}
+
+/********************************************************************/
+static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
+{
+ FEC_TBD *pUsedTbd;
+
+#ifdef DEBUG
+ printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
+ fec->cleanTbdNum, fec->usedTbdIndex);
+#endif
+
+ /*
+ * process all the consumed TBDs
+ */
+ while (fec->cleanTbdNum < FEC_TBD_NUM) {
+ pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
+ if (pUsedTbd->status & FEC_TBD_READY) {
+#ifdef DEBUG
+ printf ("Cannot clean TBD %d, in use\n",
+ fec->cleanTbdNum);
+#endif
+ return;
+ }
+
+ /*
+ * clean this buffer descriptor
+ */
+ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
+ pUsedTbd->status = FEC_TBD_WRAP;
+ else
+ pUsedTbd->status = 0;
+
+ /*
+ * update some indeces for a correct handling of the TBD ring
+ */
+ fec->cleanTbdNum++;
+ fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
+ }
+}
+
+/********************************************************************/
+static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
+{
+ u8 currByte; /* byte for which to compute the CRC */
+ int byte; /* loop - counter */
+ int bit; /* loop - counter */
+ u32 crc = 0xffffffff; /* initial value */
+
+ /*
+ * The algorithm used is the following:
+ * we loop on each of the six bytes of the provided address,
+ * and we compute the CRC by left-shifting the previous
+ * value by one position, so that each bit in the current
+ * byte of the address may contribute the calculation. If
+ * the latter and the MSB in the CRC are different, then
+ * the CRC value so computed is also ex-ored with the
+ * "polynomium generator". The current byte of the address
+ * is also shifted right by one bit at each iteration.
+ * This is because the CRC generatore in hardware is implemented
+ * as a shift-register with as many ex-ores as the radixes
+ * in the polynomium. This suggests that we represent the
+ * polynomiumm itself as a 32-bit constant.
+ */
+ for (byte = 0; byte < 6; byte++) {
+ currByte = mac[byte];
+ for (bit = 0; bit < 8; bit++) {
+ if ((currByte & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ currByte >>= 1;
+ }
+ }
+
+ crc = crc >> 26;
+
+ /*
+ * Set individual hash table register
+ */
+ if (crc >= 32) {
+ fec->eth->iaddr1 = (1 << (crc - 32));
+ fec->eth->iaddr2 = 0;
+ } else {
+ fec->eth->iaddr1 = 0;
+ fec->eth->iaddr2 = (1 << crc);
+ }
+
+ /*
+ * Set physical address
+ */
+ fec->eth->paddr1 =
+ (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
+ fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+}
+
+/********************************************************************/
+static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
+{
+ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
+ struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
+ const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
+
+#ifdef DEBUG
+ printf ("mpc8220_fec_init... Begin\n");
+#endif
+
+ /*
+ * Initialize RxBD/TxBD rings
+ */
+ mpc8220_fec_rbd_init (fec);
+ mpc8220_fec_tbd_init (fec);
+
+ /*
+ * Set up Pin Muxing for FEC 1
+ */
+ *(vu_long *) MMAP_PCFG = 0;
+ *(vu_long *) (MMAP_PCFG + 4) = 0;
+ /*
+ * Clear FEC-Lite interrupt event register(IEVENT)
+ */
+ fec->eth->ievent = 0xffffffff;
+
+ /*
+ * Set interrupt mask register
+ */
+ fec->eth->imask = 0x00000000;
+
+ /*
+ * Set FEC-Lite receive control register(R_CNTRL):
+ */
+ if (fec->xcv_type == SEVENWIRE) {
+ /*
+ * Frame length=1518; 7-wire mode
+ */
+ fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
+ } else {
+ /*
+ * Frame length=1518; MII mode;
+ */
+ fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
+ }
+
+ fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+ * and do not drop the Preamble.
+ */
+ /* tbd - rtm */
+ /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
+ /* No MII for 7-wire mode */
+ fec->eth->mii_speed = 0x00000030;
+ }
+
+ /*
+ * Set Opcode/Pause Duration Register
+ */
+ fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */
+
+ /*
+ * Set Rx FIFO alarm and granularity value
+ */
+ fec->eth->rfifo_cntrl = 0x0c000000;
+ fec->eth->rfifo_alarm = 0x0000030c;
+#ifdef DEBUG
+ if (fec->eth->rfifo_status & 0x00700000) {
+ printf ("mpc8220_fec_init() RFIFO error\n");
+ }
+#endif
+
+ /*
+ * Set Tx FIFO granularity value
+ */
+ /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
+ fec->eth->tfifo_cntrl = 0x0e000000;
+#ifdef DEBUG
+ printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
+ printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
+#endif
+
+ /*
+ * Set transmit fifo watermark register(X_WMRK), default = 64
+ */
+ fec->eth->tfifo_alarm = 0x00000080;
+ fec->eth->x_wmrk = 0x2;
+
+ /*
+ * Set individual address filter for unicast address
+ * and set physical address registers.
+ */
+ mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
+
+ /*
+ * Set multicast address filter
+ */
+ fec->eth->gaddr1 = 0x00000000;
+ fec->eth->gaddr2 = 0x00000000;
+
+ /*
+ * Turn ON cheater FSM: ????
+ */
+ fec->eth->xmit_fsm = 0x03000000;
+
+#if 1
+/*#if defined(CONFIG_MPC5200)*/
+ /*
+ * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+ * work w/ the current receive task.
+ */
+ dma->PtdCntrl |= 0x00000001;
+#endif
+
+ /*
+ * Set priority of different initiators
+ */
+ dma->IPR0 = 7; /* always */
+ dma->IPR3 = 6; /* Eth RX */
+ dma->IPR4 = 5; /* Eth Tx */
+
+ /*
+ * Clear SmartDMA task interrupt pending bits
+ */
+ DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
+
+ /*
+ * Initialize SmartDMA parameters stored in SRAM
+ */
+ *(int *) FEC_TBD_BASE = (int) fec->tbdBase;
+ *(int *) FEC_RBD_BASE = (int) fec->rbdBase;
+ *(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
+ *(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
+
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Initialize PHY(LXT971A):
+ *
+ * Generally, on power up, the LXT971A reads its configuration
+ * pins to check for forced operation, If not cofigured for
+ * forced operation, it uses auto-negotiation/parallel detection
+ * to automatically determine line operating conditions.
+ * If the PHY device on the other side of the link supports
+ * auto-negotiation, the LXT971A auto-negotiates with it
+ * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
+ * support auto-negotiation, the LXT971A automatically detects
+ * the presence of either link pulses(10Mbps PHY) or Idle
+ * symbols(100Mbps) and sets its operating conditions accordingly.
+ *
+ * When auto-negotiation is controlled by software, the following
+ * steps are recommended.
+ *
+ * Note:
+ * The physical address is dependent on hardware configuration.
+ *
+ */
+ int timeout = 1;
+ u16 phyStatus;
+
+ /*
+ * Reset PHY, then delay 300ns
+ */
+ miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
+ udelay (1000);
+
+ if (fec->xcv_type == MII10) {
+ /*
+ * Force 10Base-T, FDX operation
+ */
+#ifdef DEBUG
+ printf ("Forcing 10 Mbps ethernet link... ");
+#endif
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+ /*
+ miiphy_write(fec, phyAddr, 0x0, 0x0100);
+ */
+ miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
+
+ timeout = 20;
+ do { /* wait for link status to go down */
+ udelay (10000);
+ if ((timeout--) == 0) {
+#ifdef DEBUG
+ printf ("hmmm, should not have waited...");
+#endif
+ break;
+ }
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+#ifdef DEBUG
+ printf ("=");
+#endif
+ } while ((phyStatus & 0x0004)); /* !link up */
+
+ timeout = 1000;
+ do { /* wait for link status to come back up */
+ udelay (10000);
+ if ((timeout--) == 0) {
+ printf ("failed. Link is down.\n");
+ break;
+ }
+ miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
+#ifdef DEBUG
+ printf ("+");
+#endif
+ } while (!(phyStatus & 0x0004)); /* !link up */
+
+#ifdef DEBUG
+ printf ("done.\n");
+#endif
+ } else { /* MII100 */
+ /*
+ * Set the auto-negotiation advertisement register bits
+ */
+ miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
+
+ /*
+ * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
+ */
+ miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
+
+ /*
+ * Wait for AN completion
+ */
+ timeout = 5000;
+ do {
+ udelay (1000);
+
+ if ((timeout--) == 0) {
+#ifdef DEBUG
+ printf ("PHY auto neg 0 failed...\n");
+#endif
+ return -1;
+ }
+
+ if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
+ 0) {
+#ifdef DEBUG
+ printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
+#endif
+ return -1;
+ }
+ } while (!(phyStatus & 0x0004));
+
+#ifdef DEBUG
+ printf ("PHY auto neg complete! \n");
+#endif
+ }
+
+ }
+
+ /*
+ * Enable FEC-Lite controller
+ */
+ fec->eth->ecntrl |= 0x00000006;
+
+#ifdef DEBUG
+ if (fec->xcv_type != SEVENWIRE)
+ mpc8220_fec_phydump (dev->name);
+#endif
+
+ /*
+ * Enable SmartDMA receive task
+ */
+ DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
+
+#ifdef DEBUG
+ printf ("mpc8220_fec_init... Done \n");
+#endif
+
+ return 1;
+}
+
+/********************************************************************/
+static void mpc8220_fec_halt (struct eth_device *dev)
+{
+ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
+ int counter = 0xffff;
+
+#ifdef DEBUG
+ if (fec->xcv_type != SEVENWIRE)
+ mpc8220_fec_phydump (dev->name);
+#endif
+
+ /*
+ * mask FEC chip interrupts
+ */
+ fec->eth->imask = 0;
+
+ /*
+ * issue graceful stop command to the FEC transmitter if necessary
+ */
+ fec->eth->x_cntrl |= 0x00000001;
+
+ /*
+ * wait for graceful stop to register
+ */
+ while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
+
+ /*
+ * Disable SmartDMA tasks
+ */
+ DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
+ DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
+
+ /*
+ * Disable the Ethernet Controller
+ */
+ fec->eth->ecntrl &= 0xfffffffd;
+
+ /*
+ * Clear FIFO status registers
+ */
+ fec->eth->rfifo_status &= 0x00700000;
+ fec->eth->tfifo_status &= 0x00700000;
+
+ fec->eth->reset_cntrl = 0x01000000;
+
+ /*
+ * Issue a reset command to the FEC chip
+ */
+ fec->eth->ecntrl |= 0x1;
+
+ /*
+ * wait at least 16 clock cycles
+ */
+ udelay (10);
+
+#ifdef DEBUG
+ printf ("Ethernet task stopped\n");
+#endif
+}
+
+#ifdef DEBUG
+/********************************************************************/
+
+static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
+{
+ u16 phyAddr = CONFIG_PHY_ADDR;
+ u16 phyStatus;
+
+ if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
+ || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
+
+ miiphy_read (devname, phyAddr, 0x1, &phyStatus);
+ printf ("\nphyStatus: 0x%04x\n", phyStatus);
+ printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
+ printf ("ievent: 0x%08x\n", fec->eth->ievent);
+ printf ("x_status: 0x%08x\n", fec->eth->x_status);
+ printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
+
+ printf (" control 0x%08x\n", fec->eth->tfifo_cntrl);
+ printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
+ printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
+ printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm);
+ printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
+ printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
+ }
+}
+
+static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
+{
+ u16 phyAddr = CONFIG_PHY_ADDR;
+ u16 phyStatus;
+
+ if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
+ || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
+
+ miiphy_read (devname, phyAddr, 0x1, &phyStatus);
+ printf ("\nphyStatus: 0x%04x\n", phyStatus);
+ printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
+ printf ("ievent: 0x%08x\n", fec->eth->ievent);
+ printf ("x_status: 0x%08x\n", fec->eth->x_status);
+ printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
+
+ printf (" control 0x%08x\n", fec->eth->rfifo_cntrl);
+ printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
+ printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
+ printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm);
+ printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
+ printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
+ }
+}
+#endif /* DEBUG */
+
+/********************************************************************/
+
+static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
+ int data_length)
+{
+ /*
+ * This routine transmits one frame. This routine only accepts
+ * 6-byte Ethernet addresses.
+ */
+ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
+ FEC_TBD *pTbd;
+
+#ifdef DEBUG
+ printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
+ tfifo_print (dev->name, fec);
+#endif
+
+ /*
+ * Clear Tx BD ring at first
+ */
+ mpc8220_fec_tbd_scrub (fec);
+
+ /*
+ * Check for valid length of data.
+ */
+ if ((data_length > 1500) || (data_length <= 0)) {
+ return -1;
+ }
+
+ /*
+ * Check the number of vacant TxBDs.
+ */
+ if (fec->cleanTbdNum < 1) {
+#ifdef DEBUG
+ printf ("No available TxBDs ...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * Get the first TxBD to send the mac header
+ */
+ pTbd = &fec->tbdBase[fec->tbdIndex];
+ pTbd->dataLength = data_length;
+ pTbd->dataPointer = (u32) eth_data;
+ pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
+ fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
+
+#ifdef DEBUG
+ printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
+#endif
+
+ /*
+ * Kick the MII i/f
+ */
+ if (fec->xcv_type != SEVENWIRE) {
+ u16 phyStatus;
+
+ miiphy_read (dev->name, 0, 0x1, &phyStatus);
+ }
+
+ /*
+ * Enable SmartDMA transmit task
+ */
+
+#ifdef DEBUG
+ tfifo_print (dev->name, fec);
+#endif
+
+ DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
+
+#ifdef DEBUG
+ tfifo_print (dev->name, fec);
+#endif
+
+#ifdef DEBUG
+ printf ("+");
+#endif
+
+ fec->cleanTbdNum -= 1;
+
+#ifdef DEBUG
+ printf ("smartDMA ethernet Tx task enabled\n");
+#endif
+ /*
+ * wait until frame is sent .
+ */
+ while (pTbd->status & FEC_TBD_READY) {
+ udelay (10);
+#ifdef DEBUG
+ printf ("TDB status = %04x\n", pTbd->status);
+#endif
+ }
+
+ return 0;
+}
+
+
+/********************************************************************/
+static int mpc8220_fec_recv (struct eth_device *dev)
+{
+ /*
+ * This command pulls one frame from the card
+ */
+ mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
+ FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
+ unsigned long ievent;
+ int frame_length, len = 0;
+ NBUF *frame;
+
+#ifdef DEBUG
+ printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
+ printf ("-");
+#endif
+
+ /*
+ * Check if any critical events have happened
+ */
+ ievent = fec->eth->ievent;
+ fec->eth->ievent = ievent;
+ if (ievent & 0x20060000) {
+ /* BABT, Rx/Tx FIFO errors */
+ mpc8220_fec_halt (dev);
+ mpc8220_fec_init (dev, NULL);
+ return 0;
+ }
+ if (ievent & 0x80000000) {
+ /* Heartbeat error */
+ fec->eth->x_cntrl |= 0x00000001;
+ }
+ if (ievent & 0x10000000) {
+ /* Graceful stop complete */
+ if (fec->eth->x_cntrl & 0x00000001) {
+ mpc8220_fec_halt (dev);
+ fec->eth->x_cntrl &= ~0x00000001;
+ mpc8220_fec_init (dev, NULL);
+ }
+ }
+
+ if (!(pRbd->status & FEC_RBD_EMPTY)) {
+ if ((pRbd->status & FEC_RBD_LAST)
+ && !(pRbd->status & FEC_RBD_ERR)
+ && ((pRbd->dataLength - 4) > 14)) {
+
+ /*
+ * Get buffer address and size
+ */
+ frame = (NBUF *) pRbd->dataPointer;
+ frame_length = pRbd->dataLength - 4;
+
+#if (0)
+ {
+ int i;
+
+ printf ("recv data hdr:");
+ for (i = 0; i < 14; i++)
+ printf ("%x ", *(frame->head + i));
+ printf ("\n");
+ }
+#endif
+ /*
+ * Fill the buffer and pass it to upper layers
+ */
+/* memcpy(buff, frame->head, 14);
+ memcpy(buff + 14, frame->data, frame_length);*/
+ NetReceive ((volatile uchar *) pRbd->dataPointer,
+ frame_length);
+ len = frame_length;
+ }
+ /*
+ * Reset buffer descriptor as empty
+ */
+ mpc8220_fec_rbd_clean (fec, pRbd);
+ }
+ DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
+ return len;
+}
+
+
+/********************************************************************/
+int mpc8220_fec_initialize (bd_t * bis)
+{
+ mpc8220_fec_priv *fec;
+
+#ifdef CONFIG_HAS_ETH1
+ mpc8220_fec_priv *fec2;
+#endif
+ struct eth_device *dev;
+ char *tmp, *end;
+ char env_enetaddr[6];
+
+#ifdef CONFIG_HAS_ETH1
+ char env_enet1addr[6];
+#endif
+ int i;
+
+ fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
+ dev = (struct eth_device *) malloc (sizeof (*dev));
+ memset (dev, 0, sizeof *dev);
+
+ fec->eth = (ethernet_regs *) MMAP_FEC1;
+#ifdef CONFIG_HAS_ETH1
+ fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
+ fec2->eth = (ethernet_regs *) MMAP_FEC2;
+#endif
+ fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
+ fec->rbdBase =
+ (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
+ fec->xcv_type = MII100;
+
+ dev->priv = (void *) fec;
+ dev->iobase = MMAP_FEC1;
+ dev->init = mpc8220_fec_init;
+ dev->halt = mpc8220_fec_halt;
+ dev->send = mpc8220_fec_send;
+ dev->recv = mpc8220_fec_recv;
+
+ sprintf (dev->name, "FEC ETHERNET");
+ eth_register (dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register (dev->name,
+ fec8220_miiphy_read, fec8220_miiphy_write);
+#endif
+
+ /*
+ * Try to set the mac address now. The fec mac address is
+ * a garbage after reset. When not using fec for booting
+ * the Linux fec driver will try to work with this garbage.
+ */
+ tmp = getenv ("ethaddr");
+ if (tmp) {
+ for (i = 0; i < 6; i++) {
+ env_enetaddr[i] =
+ tmp ? simple_strtoul (tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end + 1 : end;
+ }
+ mpc8220_fec_set_hwaddr (fec, env_enetaddr);
+ }
+#ifdef CONFIG_HAS_ETH1
+ tmp = getenv ("eth1addr");
+ if (tmp) {
+ for (i = 0; i < 6; i++) {
+ env_enet1addr[i] =
+ tmp ? simple_strtoul (tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end + 1 : end;
+ }
+ mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
+ }
+#endif
+
+ return 1;
+}
+
+/* MII-interface related functions */
+/********************************************************************/
+int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
+{
+ ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
+ u32 reg; /* convenient holder for the PHY register */
+ u32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ /*
+ * reading from any PHY's register is done by properly
+ * programming the FEC's MII data register.
+ */
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data =
+ (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
+ | reg);
+
+ /*
+ * wait for the related interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000)));
+
+ if (timeout == 0) {
+#ifdef DEBUG
+ printf ("Read MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear mii interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ /*
+ * it's now safe to read the PHY's register
+ */
+ *retVal = (u16) eth->mii_data;
+
+ return 0;
+}
+
+/********************************************************************/
+int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
+{
+ ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
+ u32 reg; /* convenient holder for the PHY register */
+ u32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
+ FEC_MII_DATA_TA | phy | reg | data);
+
+ /*
+ * wait for the MII interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000)));
+
+ if (timeout == 0) {
+#ifdef DEBUG
+ printf ("Write MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear MII interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ return 0;
+}
+
+#ifdef DEBUG
+static u32 local_crc32 (char *string, unsigned int crc_value, int len)
+{
+ int i;
+ char c;
+ unsigned int crc, count;
+
+ /*
+ * crc32 algorithm
+ */
+ /*
+ * crc = 0xffffffff; * The initialized value should be 0xffffffff
+ */
+ crc = crc_value;
+
+ for (i = len; --i >= 0;) {
+ c = *string++;
+ for (count = 0; count < 8; count++) {
+ if ((c & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ c >>= 1;
+ }
+ }
+
+ /*
+ * In big endian system, do byte swaping for crc value
+ */
+ return crc;
+}
+#endif /* DEBUG */
+
+#endif /* CONFIG_MPC8220_FEC */
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.h
+ * (C) Copyright Motorola, Inc., 2000
+ *
+ * odin ethernet header file
+ */
+
+#ifndef __MPC8220_FEC_H
+#define __MPC8220_FEC_H
+
+#include <common.h>
+#include <mpc8220.h>
+#include "dma.h"
+
+typedef struct ethernet_register_set {
+
+/* [10:2]addr = 00 */
+
+/* Control and status Registers (offset 000-1FF) */
+
+ volatile u32 fec_id; /* MBAR_ETH + 0x000 */
+ volatile u32 ievent; /* MBAR_ETH + 0x004 */
+ volatile u32 imask; /* MBAR_ETH + 0x008 */
+
+ volatile u32 RES0[1]; /* MBAR_ETH + 0x00C */
+ volatile u32 r_des_active; /* MBAR_ETH + 0x010 */
+ volatile u32 x_des_active; /* MBAR_ETH + 0x014 */
+ volatile u32 r_des_active_cl; /* MBAR_ETH + 0x018 */
+ volatile u32 x_des_active_cl; /* MBAR_ETH + 0x01C */
+ volatile u32 ivent_set; /* MBAR_ETH + 0x020 */
+ volatile u32 ecntrl; /* MBAR_ETH + 0x024 */
+
+ volatile u32 RES1[6]; /* MBAR_ETH + 0x028-03C */
+ volatile u32 mii_data; /* MBAR_ETH + 0x040 */
+ volatile u32 mii_speed; /* MBAR_ETH + 0x044 */
+ volatile u32 mii_status; /* MBAR_ETH + 0x048 */
+
+ volatile u32 RES2[5]; /* MBAR_ETH + 0x04C-05C */
+ volatile u32 mib_data; /* MBAR_ETH + 0x060 */
+ volatile u32 mib_control; /* MBAR_ETH + 0x064 */
+
+ volatile u32 RES3[6]; /* MBAR_ETH + 0x068-7C */
+ volatile u32 r_activate; /* MBAR_ETH + 0x080 */
+ volatile u32 r_cntrl; /* MBAR_ETH + 0x084 */
+ volatile u32 r_hash; /* MBAR_ETH + 0x088 */
+ volatile u32 r_data; /* MBAR_ETH + 0x08C */
+ volatile u32 ar_done; /* MBAR_ETH + 0x090 */
+ volatile u32 r_test; /* MBAR_ETH + 0x094 */
+ volatile u32 r_mib; /* MBAR_ETH + 0x098 */
+ volatile u32 r_da_low; /* MBAR_ETH + 0x09C */
+ volatile u32 r_da_high; /* MBAR_ETH + 0x0A0 */
+
+ volatile u32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */
+ volatile u32 x_activate; /* MBAR_ETH + 0x0C0 */
+ volatile u32 x_cntrl; /* MBAR_ETH + 0x0C4 */
+ volatile u32 backoff; /* MBAR_ETH + 0x0C8 */
+ volatile u32 x_data; /* MBAR_ETH + 0x0CC */
+ volatile u32 x_status; /* MBAR_ETH + 0x0D0 */
+ volatile u32 x_mib; /* MBAR_ETH + 0x0D4 */
+ volatile u32 x_test; /* MBAR_ETH + 0x0D8 */
+ volatile u32 fdxfc_da1; /* MBAR_ETH + 0x0DC */
+ volatile u32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */
+ volatile u32 paddr1; /* MBAR_ETH + 0x0E4 */
+ volatile u32 paddr2; /* MBAR_ETH + 0x0E8 */
+ volatile u32 op_pause; /* MBAR_ETH + 0x0EC */
+
+ volatile u32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */
+ volatile u32 instr_reg; /* MBAR_ETH + 0x100 */
+ volatile u32 context_reg; /* MBAR_ETH + 0x104 */
+ volatile u32 test_cntrl; /* MBAR_ETH + 0x108 */
+ volatile u32 acc_reg; /* MBAR_ETH + 0x10C */
+ volatile u32 ones; /* MBAR_ETH + 0x110 */
+ volatile u32 zeros; /* MBAR_ETH + 0x114 */
+ volatile u32 iaddr1; /* MBAR_ETH + 0x118 */
+ volatile u32 iaddr2; /* MBAR_ETH + 0x11C */
+ volatile u32 gaddr1; /* MBAR_ETH + 0x120 */
+ volatile u32 gaddr2; /* MBAR_ETH + 0x124 */
+ volatile u32 random; /* MBAR_ETH + 0x128 */
+ volatile u32 rand1; /* MBAR_ETH + 0x12C */
+ volatile u32 tmp; /* MBAR_ETH + 0x130 */
+
+ volatile u32 RES6[3]; /* MBAR_ETH + 0x134-13C */
+ volatile u32 fifo_id; /* MBAR_ETH + 0x140 */
+ volatile u32 x_wmrk; /* MBAR_ETH + 0x144 */
+ volatile u32 fcntrl; /* MBAR_ETH + 0x148 */
+ volatile u32 r_bound; /* MBAR_ETH + 0x14C */
+ volatile u32 r_fstart; /* MBAR_ETH + 0x150 */
+ volatile u32 r_count; /* MBAR_ETH + 0x154 */
+ volatile u32 r_lag; /* MBAR_ETH + 0x158 */
+ volatile u32 r_read; /* MBAR_ETH + 0x15C */
+ volatile u32 r_write; /* MBAR_ETH + 0x160 */
+ volatile u32 x_count; /* MBAR_ETH + 0x164 */
+ volatile u32 x_lag; /* MBAR_ETH + 0x168 */
+ volatile u32 x_retry; /* MBAR_ETH + 0x16C */
+ volatile u32 x_write; /* MBAR_ETH + 0x170 */
+ volatile u32 x_read; /* MBAR_ETH + 0x174 */
+
+ volatile u32 RES7[2]; /* MBAR_ETH + 0x178-17C */
+ volatile u32 fm_cntrl; /* MBAR_ETH + 0x180 */
+ volatile u32 rfifo_data; /* MBAR_ETH + 0x184 */
+ volatile u32 rfifo_status; /* MBAR_ETH + 0x188 */
+ volatile u32 rfifo_cntrl; /* MBAR_ETH + 0x18C */
+ volatile u32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */
+ volatile u32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */
+ volatile u32 rfifo_alarm; /* MBAR_ETH + 0x198 */
+ volatile u32 rfifo_rdptr; /* MBAR_ETH + 0x19C */
+ volatile u32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */
+ volatile u32 tfifo_data; /* MBAR_ETH + 0x1A4 */
+ volatile u32 tfifo_status; /* MBAR_ETH + 0x1A8 */
+ volatile u32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */
+ volatile u32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */
+ volatile u32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */
+ volatile u32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */
+ volatile u32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */
+ volatile u32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */
+
+ volatile u32 reset_cntrl; /* MBAR_ETH + 0x1C4 */
+ volatile u32 xmit_fsm; /* MBAR_ETH + 0x1C8 */
+
+ volatile u32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */
+ volatile u32 rdes_data0; /* MBAR_ETH + 0x1D8 */
+ volatile u32 rdes_data1; /* MBAR_ETH + 0x1DC */
+ volatile u32 r_length; /* MBAR_ETH + 0x1E0 */
+ volatile u32 x_length; /* MBAR_ETH + 0x1E4 */
+ volatile u32 x_addr; /* MBAR_ETH + 0x1E8 */
+ volatile u32 cdes_data; /* MBAR_ETH + 0x1EC */
+ volatile u32 status; /* MBAR_ETH + 0x1F0 */
+ volatile u32 dma_control; /* MBAR_ETH + 0x1F4 */
+ volatile u32 des_cmnd; /* MBAR_ETH + 0x1F8 */
+ volatile u32 data; /* MBAR_ETH + 0x1FC */
+
+ /* MIB COUNTERS (Offset 200-2FF) */
+
+ volatile u32 rmon_t_drop; /* MBAR_ETH + 0x200 */
+ volatile u32 rmon_t_packets; /* MBAR_ETH + 0x204 */
+ volatile u32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
+ volatile u32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
+ volatile u32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
+ volatile u32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
+ volatile u32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
+ volatile u32 rmon_t_frag; /* MBAR_ETH + 0x21C */
+ volatile u32 rmon_t_jab; /* MBAR_ETH + 0x220 */
+ volatile u32 rmon_t_col; /* MBAR_ETH + 0x224 */
+ volatile u32 rmon_t_p64; /* MBAR_ETH + 0x228 */
+ volatile u32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
+ volatile u32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
+ volatile u32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
+ volatile u32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
+ volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */
+ volatile u32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
+ volatile u32 rmon_t_octets; /* MBAR_ETH + 0x244 */
+ volatile u32 ieee_t_drop; /* MBAR_ETH + 0x248 */
+ volatile u32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
+ volatile u32 ieee_t_1col; /* MBAR_ETH + 0x250 */
+ volatile u32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
+ volatile u32 ieee_t_def; /* MBAR_ETH + 0x258 */
+ volatile u32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
+ volatile u32 ieee_t_excol; /* MBAR_ETH + 0x260 */
+ volatile u32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
+ volatile u32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
+ volatile u32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
+ volatile u32 t_fdxfc; /* MBAR_ETH + 0x270 */
+ volatile u32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
+
+ volatile u32 RES9[2]; /* MBAR_ETH + 0x278-27C */
+ volatile u32 rmon_r_drop; /* MBAR_ETH + 0x280 */
+ volatile u32 rmon_r_packets; /* MBAR_ETH + 0x284 */
+ volatile u32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
+ volatile u32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
+ volatile u32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
+ volatile u32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
+ volatile u32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
+ volatile u32 rmon_r_frag; /* MBAR_ETH + 0x29C */
+ volatile u32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
+
+ volatile u32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
+
+ volatile u32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
+ volatile u32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
+ volatile u32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
+ volatile u32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
+ volatile u32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
+ volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */
+ volatile u32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
+ volatile u32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
+ volatile u32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
+ volatile u32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
+ volatile u32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
+ volatile u32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
+ volatile u32 r_macerr; /* MBAR_ETH + 0x2D8 */
+ volatile u32 r_fdxfc; /* MBAR_ETH + 0x2DC */
+ volatile u32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
+
+ volatile u32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */
+
+ volatile u32 RES11[64]; /* MBAR_ETH + 0x300-3FF */
+} ethernet_regs;
+
+/* Receive & Transmit Buffer Descriptor definitions */
+typedef struct BufferDescriptor {
+ u16 status;
+ u16 dataLength;
+ u32 dataPointer;
+} FEC_RBD;
+
+typedef struct {
+ u16 status;
+ u16 dataLength;
+ u32 dataPointer;
+} FEC_TBD;
+
+/* private structure */
+typedef enum {
+ SEVENWIRE, /* 7-wire */
+ MII10, /* MII 10Mbps */
+ MII100 /* MII 100Mbps */
+} xceiver_type;
+
+typedef struct {
+ ethernet_regs *eth;
+ xceiver_type xcv_type; /* transceiver type */
+ FEC_RBD *rbdBase; /* RBD ring */
+ FEC_TBD *tbdBase; /* TBD ring */
+ u16 rbdIndex; /* next receive BD to read */
+ u16 tbdIndex; /* next transmit BD to send */
+ u16 usedTbdIndex; /* next transmit BD to clean */
+ u16 cleanTbdNum; /* the number of available transmit BDs */
+} mpc8220_fec_priv;
+
+/* Ethernet parameter area */
+#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00)
+#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04)
+#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08)
+#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c)
+
+/* BD Numer definitions */
+#define FEC_TBD_NUM 48 /* The user can adjust this value */
+#define FEC_RBD_NUM 32 /* The user can adjust this value */
+
+/* packet size limit */
+#define FEC_MAX_PKT_SIZE 1536
+
+/* RBD bits definitions */
+#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
+#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_RBD_INT 0x1000 /* Interrupt */
+#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
+#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
+#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
+#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
+#define FEC_RBD_LG 0x0020 /* Frame length violation */
+#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
+#define FEC_RBD_SH 0x0008 /* Short frame */
+#define FEC_RBD_CR 0x0004 /* CRC error */
+#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
+#define FEC_RBD_TR 0x0001 /* Frame is truncated */
+#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
+ FEC_RBD_OV | FEC_RBD_TR)
+
+/* TBD bits definitions */
+#define FEC_TBD_READY 0x8000 /* Buffer is ready */
+#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_TBD_INT 0x1000 /* Interrupt */
+#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
+#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
+#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
+
+/* MII-related definitios */
+#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
+#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
+#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
+#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
+#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
+#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
+#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
+
+#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
+#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
+
+#endif /* __MPC8220_FEC_H */
--- /dev/null
+/*
+ * Copyright (C) 2004, Freescale Semiconductor, Inc.
+ *
+ * This file contains microcode for the FEC controller of the MPC8220.
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_MPC8220)
+
+/* sas/sccg, gas target */
+.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
+.section smartdmaTaskTable,"aw",@progbits /* Task tables */
+.align 9
+.globl taskTable
+taskTable:
+.globl scEthernetRecv_Entry
+scEthernetRecv_Entry: /* Task 0 */
+.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
+.long scEthernetRecv_TDT - taskTable + 0x00000094
+.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
+.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
+.long 0x00000000
+.long 0x00000000
+.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
+.long 0xf0000000
+.globl scEthernetXmit_Entry
+scEthernetXmit_Entry: /* Task 1 */
+.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
+.long scEthernetXmit_TDT - taskTable + 0x000000e0
+.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
+.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
+.long 0x00000000
+.long 0x00000000
+.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
+.long 0xf0000000
+
+
+.globl scEthernetRecv_TDT
+scEthernetRecv_TDT: /* Task 0 Descriptor Table */
+.long 0xc4c50000 /* 0000(153): LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
+.long 0x84c5e000 /* 0004(153): LCD: idx1 = var9 + var11; ; idx1 += inc0 */
+.long 0x10001f08 /* 0008(156): DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x10000380 /* 000C(157): DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f88 /* 0010(158): DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
+.long 0x81980000 /* 0014(162): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
+.long 0x10000780 /* 0018(164): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 001C(165): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x010cf04c /* 0020(165): DRD2B1: var4 = EU3(); EU3(var1,var12) */
+.long 0x82180349 /* 0024(169): LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
+.long 0x81c68004 /* 0028(172): LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
+.long 0x70000000 /* 002C(174): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x018cf04e /* 0030(174): DRD2B1: var6 = EU3(); EU3(var1,var14) */
+.long 0x70000000 /* 0034(175): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x020cf04f /* 0038(175): DRD2B1: var8 = EU3(); EU3(var1,var15) */
+.long 0x00000b88 /* 003C(176): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
+.long 0x80025184 /* 0040(205): LCDEXT: idx1 = 0xf0009184; ; */
+.long 0x86810412 /* 0044(205): LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */
+.long 0x0200cf88 /* 0048(209): DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */
+.long 0x80025184 /* 004C(217): LCDEXT: idx1 = 0xf0009184; ; */
+.long 0x8681845b /* 0050(217): LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */
+.long 0x0000cf88 /* 0054(221): DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */
+.long 0xc31883a4 /* 0058(225): LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */
+.long 0x80190000 /* 005C(225): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+.long 0x04008468 /* 0060(227): DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
+.long 0xc4038360 /* 0064(232): LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */
+.long 0x81c50000 /* 0068(233): LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
+.long 0x1000cb18 /* 006C(235): DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f18 /* 0070(236): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
+.long 0xc418836d /* 0074(238): LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */
+.long 0x83990000 /* 0078(238): LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
+.long 0x10000c00 /* 007C(240): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x0000c800 /* 0080(241): DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
+.long 0x81988000 /* 0084(245): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x10000788 /* 0088(247): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 008C(248): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x080cf04c /* 0090(248): DRD2B1: idx0 = EU3(); EU3(var1,var12) */
+.long 0x000001f8 /* 0094(:0): NOP */
+
+
+.globl scEthernetXmit_TDT
+scEthernetXmit_TDT: /* Task 1 Descriptor Table */
+.long 0x80095b00 /* 0000(280): LCDEXT: idx0 = 0xf0025b00; ; */
+.long 0x85c60004 /* 0004(280): LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
+.long 0x10002308 /* 0008(283): DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x10000f88 /* 000C(284): DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000380 /* 0010(285): DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
+.long 0x81980000 /* 0014(288): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
+.long 0x10000780 /* 0018(290): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 001C(291): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x024cf04d /* 0020(291): DRD2B1: var9 = EU3(); EU3(var1,var13) */
+.long 0x84980309 /* 0024(294): LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
+.long 0xc0004003 /* 0028(297): LCDEXT: idx1 = 0x00000003; ; */
+.long 0x81c60004 /* 002C(297): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
+.long 0x70000000 /* 0030(299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x010cf04e /* 0034(299): DRD2B1: var4 = EU3(); EU3(var1,var14) */
+.long 0x70000000 /* 0038(300): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x014cf04f /* 003C(300): DRD2B1: var5 = EU3(); EU3(var1,var15) */
+.long 0x70000000 /* 0040(301): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x028cf050 /* 0044(301): DRD2B1: var10 = EU3(); EU3(var1,var16) */
+.long 0x70000000 /* 0048(302): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
+.long 0x018cf051 /* 004C(302): DRD2B1: var6 = EU3(); EU3(var1,var17) */
+.long 0x10000b90 /* 0050(303): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 0054(304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x01ccf0a1 /* 0058(304): DRD2B1: var7 = EU3(); EU3(var2,idx1) */
+.long 0xc2988312 /* 005C(308): LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
+.long 0x83490000 /* 0060(308): LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
+.long 0x00001b10 /* 0064(310): DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
+.long 0x800251a4 /* 0068(315): LCDEXT: idx1 = 0xf00091a4; ; */
+.long 0xc30104dc /* 006C(315): LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */
+.long 0x839a032d /* 0070(316): LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */
+.long 0x0220c798 /* 0074(321): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */
+.long 0x800251a4 /* 0078(329): LCDEXT: idx1 = 0xf00091a4; ; */
+.long 0x99198337 /* 007C(329): LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */
+.long 0x022ac798 /* 0080(333): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */
+.long 0x800251a4 /* 0084(350): LCDEXT: idx1 = 0xf00091a4; ; */
+.long 0xc1430000 /* 0088(350): LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
+.long 0x82998312 /* 008C(351): LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
+.long 0x0a2ac790 /* 0090(354): DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */
+.long 0x81988000 /* 0094(359): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x60000002 /* 0098(361): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
+.long 0x0c4cfc4d /* 009C(361): DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
+.long 0xc21883ad /* 00A0(365): LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
+.long 0x80190000 /* 00A4(365): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
+.long 0x04008460 /* 00A8(367): DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
+.long 0xc4052305 /* 00AC(371): LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
+.long 0x81ca0000 /* 00B0(372): LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */
+.long 0x1000c718 /* 00B4(374): DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00000f18 /* 00B8(375): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
+.long 0xc4188000 /* 00BC(378): LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
+.long 0x85190312 /* 00C0(378): LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
+.long 0x10000c00 /* 00C4(380): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x1000c400 /* 00C8(381): DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x00008860 /* 00CC(382): DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
+.long 0x81988000 /* 00D0(386): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
+.long 0x10000788 /* 00D4(388): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
+.long 0x60000000 /* 00D8(389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
+.long 0x080cf04d /* 00DC(389): DRD2B1: idx0 = EU3(); EU3(var1,var13) */
+.long 0x000001f8 /* 00E0(:0): NOP */
+
+.align 8
+
+.globl scEthernetRecv_VarTab
+scEthernetRecv_VarTab: /* Task 0 Variable Table */
+.long 0x00000000 /* var[0] */
+.long 0x00000000 /* var[1] */
+.long 0x00000000 /* var[2] */
+.long 0x00000000 /* var[3] */
+.long 0x00000000 /* var[4] */
+.long 0x00000000 /* var[5] */
+.long 0x00000000 /* var[6] */
+.long 0x00000000 /* var[7] */
+.long 0x00000000 /* var[8] */
+.long 0xf0025b00 /* var[9] */
+.long 0x00000008 /* var[10] */
+.long 0x0000000c /* var[11] */
+.long 0x80000000 /* var[12] */
+.long 0x00000000 /* var[13] */
+.long 0x10000000 /* var[14] */
+.long 0x20000000 /* var[15] */
+.long 0x00000800 /* var[16] */
+.long 0x00000001 /* var[17] */
+.long 0x00000000 /* var[18] */
+.long 0x00000000 /* var[19] */
+.long 0x00000000 /* var[20] */
+.long 0x00000000 /* var[21] */
+.long 0x00000000 /* var[22] */
+.long 0x00000000 /* var[23] */
+.long 0x00000000 /* inc[0] */
+.long 0x60000000 /* inc[1] */
+.long 0x20000004 /* inc[2] */
+.long 0x20000001 /* inc[3] */
+.long 0x80000000 /* inc[4] */
+.long 0x40000000 /* inc[5] */
+.long 0x00000000 /* inc[6] */
+.long 0x00000000 /* inc[7] */
+
+.align 8
+
+.globl scEthernetXmit_VarTab
+scEthernetXmit_VarTab: /* Task 1 Variable Table */
+.long 0x00000000 /* var[0] */
+.long 0x00000000 /* var[1] */
+.long 0x00000000 /* var[2] */
+.long 0x00000000 /* var[3] */
+.long 0x00000000 /* var[4] */
+.long 0x00000000 /* var[5] */
+.long 0x00000000 /* var[6] */
+.long 0x00000000 /* var[7] */
+.long 0x00000000 /* var[8] */
+.long 0x00000000 /* var[9] */
+.long 0x00000000 /* var[10] */
+.long 0xf0025b00 /* var[11] */
+.long 0x00000000 /* var[12] */
+.long 0x80000000 /* var[13] */
+.long 0x10000000 /* var[14] */
+.long 0x08000000 /* var[15] */
+.long 0x20000000 /* var[16] */
+.long 0x0000ffff /* var[17] */
+.long 0xffffffff /* var[18] */
+.long 0x00000004 /* var[19] */
+.long 0x00000008 /* var[20] */
+.long 0x00000000 /* var[21] */
+.long 0x00000000 /* var[22] */
+.long 0x00000000 /* var[23] */
+.long 0x00000000 /* inc[0] */
+.long 0x60000000 /* inc[1] */
+.long 0x40000000 /* inc[2] */
+.long 0xc000fffc /* inc[3] */
+.long 0xe0000004 /* inc[4] */
+.long 0x80000000 /* inc[5] */
+.long 0x4000ffff /* inc[6] */
+.long 0xe0000001 /* inc[7] */
+
+.align 8
+
+.globl scEthernetRecv_FDT
+scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x21800000 /* and(), EU# 3 */
+.long 0x21e00000 /* or(), EU# 3 */
+.long 0x21400000 /* andn(), EU# 3 */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+
+.align 8
+
+.globl scEthernetXmit_FDT
+scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x21800000 /* and(), EU# 3 */
+.long 0x21e00000 /* or(), EU# 3 */
+.long 0x21400000 /* andn(), EU# 3 */
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+.long 0x00000000
+
+
+.globl scEthernetRecv_CSave
+scEthernetRecv_CSave: /* Task 0 context save space */
+.space 128, 0x0
+
+
+.globl scEthernetXmit_CSave
+scEthernetXmit_CSave: /* Task 1 context save space */
+.space 128, 0x0
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004, Freescale, Inc
+ * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HARD_I2C
+
+#include <mpc8220.h>
+#include <i2c.h>
+
+typedef struct mpc8220_i2c {
+ volatile u32 adr; /* I2Cn + 0x00 */
+ volatile u32 fdr; /* I2Cn + 0x04 */
+ volatile u32 cr; /* I2Cn + 0x08 */
+ volatile u32 sr; /* I2Cn + 0x0C */
+ volatile u32 dr; /* I2Cn + 0x10 */
+} i2c_t;
+
+/* I2Cn control register bits */
+#define I2C_EN 0x80
+#define I2C_IEN 0x40
+#define I2C_STA 0x20
+#define I2C_TX 0x10
+#define I2C_TXAK 0x08
+#define I2C_RSTA 0x04
+#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
+
+/* I2Cn status register bits */
+#define I2C_CF 0x80
+#define I2C_AAS 0x40
+#define I2C_BB 0x20
+#define I2C_AL 0x10
+#define I2C_SRW 0x04
+#define I2C_IF 0x02
+#define I2C_RXAK 0x01
+
+#define I2C_TIMEOUT 100
+#define I2C_RETRIES 1
+
+struct mpc8220_i2c_tap {
+ int scl2tap;
+ int tap2tap;
+};
+
+static int mpc_reg_in (volatile u32 * reg);
+static void mpc_reg_out (volatile u32 * reg, int val, int mask);
+static int wait_for_bb (void);
+static int wait_for_pin (int *status);
+static int do_address (uchar chip, char rdwr_flag);
+static int send_bytes (uchar chip, char *buf, int len);
+static int receive_bytes (uchar chip, char *buf, int len);
+static int mpc_get_fdr (int);
+
+static int mpc_reg_in (volatile u32 * reg)
+{
+ int ret;
+ ret = *reg >> 24;
+ __asm__ __volatile__ ("eieio");
+ return ret;
+}
+
+static void mpc_reg_out (volatile u32 * reg, int val, int mask)
+{
+ int tmp;
+
+ if (!mask) {
+ *reg = val << 24;
+ } else {
+ tmp = mpc_reg_in (reg);
+ *reg = ((tmp & ~mask) | (val & mask)) << 24;
+ }
+ __asm__ __volatile__ ("eieio");
+
+ return;
+}
+
+static int wait_for_bb (void)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int timeout = I2C_TIMEOUT;
+ int status;
+
+ status = mpc_reg_in (®s->sr);
+
+ while (timeout-- && (status & I2C_BB)) {
+#if 1
+ volatile int temp;
+
+ mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
+ temp = mpc_reg_in (®s->dr);
+ mpc_reg_out (®s->cr, 0, I2C_STA);
+ mpc_reg_out (®s->cr, 0, 0);
+ mpc_reg_out (®s->cr, I2C_EN, 0);
+#endif
+ udelay (1000);
+ status = mpc_reg_in (®s->sr);
+ }
+
+ return (status & I2C_BB);
+}
+
+static int wait_for_pin (int *status)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int timeout = I2C_TIMEOUT;
+
+ *status = mpc_reg_in (®s->sr);
+
+ while (timeout-- && !(*status & I2C_IF)) {
+ udelay (1000);
+ *status = mpc_reg_in (®s->sr);
+ }
+
+ if (!(*status & I2C_IF)) {
+ return -1;
+ }
+
+ mpc_reg_out (®s->sr, 0, I2C_IF);
+ return 0;
+}
+
+static int do_address (uchar chip, char rdwr_flag)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int status;
+
+ chip <<= 1;
+
+ if (rdwr_flag)
+ chip |= 1;
+
+ mpc_reg_out (®s->cr, I2C_TX, I2C_TX);
+ mpc_reg_out (®s->dr, chip, 0);
+
+ if (wait_for_pin (&status))
+ return -2;
+ if (status & I2C_RXAK)
+ return -3;
+ return 0;
+}
+
+static int send_bytes (uchar chip, char *buf, int len)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int wrcount;
+ int status;
+
+ for (wrcount = 0; wrcount < len; ++wrcount) {
+
+ mpc_reg_out (®s->dr, buf[wrcount], 0);
+
+ if (wait_for_pin (&status))
+ break;
+
+ if (status & I2C_RXAK)
+ break;
+
+ }
+
+ return !(wrcount == len);
+ return 0;
+}
+
+static int receive_bytes (uchar chip, char *buf, int len)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int dummy = 1;
+ int rdcount = 0;
+ int status;
+ int i;
+
+ mpc_reg_out (®s->cr, 0, I2C_TX);
+
+ for (i = 0; i < len; ++i) {
+ buf[rdcount] = mpc_reg_in (®s->dr);
+
+ if (dummy)
+ dummy = 0;
+ else
+ rdcount++;
+
+ if (wait_for_pin (&status))
+ return -4;
+ }
+
+ mpc_reg_out (®s->cr, I2C_TXAK, I2C_TXAK);
+ buf[rdcount++] = mpc_reg_in (®s->dr);
+
+ if (wait_for_pin (&status))
+ return -5;
+
+ mpc_reg_out (®s->cr, 0, I2C_TXAK);
+ return 0;
+}
+
+/**************** I2C API ****************/
+
+void i2c_init (int speed, int saddr)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+
+ mpc_reg_out (®s->cr, 0, 0);
+ mpc_reg_out (®s->adr, saddr << 1, 0);
+
+ /* Set clock
+ */
+ mpc_reg_out (®s->fdr, mpc_get_fdr (speed), 0);
+
+ /* Enable module
+ */
+ mpc_reg_out (®s->cr, I2C_EN, I2C_INIT_MASK);
+ mpc_reg_out (®s->sr, 0, I2C_IF);
+ return;
+}
+
+static int mpc_get_fdr (int speed)
+{
+ static int fdr = -1;
+
+ if (fdr == -1) {
+ ulong best_speed = 0;
+ ulong divider;
+ ulong ipb, scl;
+ ulong bestmatch = 0xffffffffUL;
+ int best_i = 0, best_j = 0, i, j;
+ int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 };
+ struct mpc8220_i2c_tap scltap[] = {
+ {4, 1},
+ {4, 2},
+ {6, 4},
+ {6, 8},
+ {14, 16},
+ {30, 32},
+ {62, 64},
+ {126, 128}
+ };
+
+ ipb = gd->bus_clk;
+ for (i = 7; i >= 0; i--) {
+ for (j = 7; j >= 0; j--) {
+ scl = 2 * (scltap[j].scl2tap +
+ (SCL_Tap[i] -
+ 1) * scltap[j].tap2tap + 2);
+ if (ipb <= speed * scl) {
+ if ((speed * scl - ipb) < bestmatch) {
+ bestmatch = speed * scl - ipb;
+ best_i = i;
+ best_j = j;
+ best_speed = ipb / scl;
+ }
+ }
+ }
+ }
+ divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
+ if (gd->flags & GD_FLG_RELOC) {
+ fdr = divider;
+ } else {
+ printf ("%ld kHz, ", best_speed / 1000);
+ return divider;
+ }
+ }
+
+ return fdr;
+}
+
+int i2c_probe (uchar chip)
+{
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int i;
+
+ for (i = 0; i < I2C_RETRIES; i++) {
+ mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
+
+ if (!do_address (chip, 0)) {
+ mpc_reg_out (®s->cr, 0, I2C_STA);
+ break;
+ }
+
+ mpc_reg_out (®s->cr, 0, I2C_STA);
+ udelay (50);
+ }
+
+ return (i == I2C_RETRIES);
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len)
+{
+ uchar xaddr[4];
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb ()) {
+ printf ("i2c_read: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
+ if (do_address (chip, 0)) {
+ printf ("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
+ printf ("i2c_read: send_bytes failed\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->cr, I2C_RSTA, I2C_RSTA);
+ if (do_address (chip, 1)) {
+ printf ("i2c_read: failed to address chip\n");
+ goto Done;
+ }
+
+ if (receive_bytes (chip, (char *)buf, len)) {
+ printf ("i2c_read: receive_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+ Done:
+ mpc_reg_out (®s->cr, 0, I2C_STA);
+ return ret;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
+{
+ uchar xaddr[4];
+ i2c_t *regs = (i2c_t *) MMAP_I2C;
+ int ret = -1;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+ if (wait_for_bb ()) {
+ printf ("i2c_write: bus is busy\n");
+ goto Done;
+ }
+
+ mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
+ if (do_address (chip, 0)) {
+ printf ("i2c_write: failed to address chip\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
+ printf ("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ if (send_bytes (chip, (char *)buf, len)) {
+ printf ("i2c_write: send_bytes failed\n");
+ goto Done;
+ }
+
+ ret = 0;
+ Done:
+ mpc_reg_out (®s->cr, 0, I2C_STA);
+ return ret;
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/* I2cCore.c - MPC8220 PPC I2C Library */
+
+/* Copyright 2004 Freescale Semiconductor, Inc. */
+
+/*
+modification history
+--------------------
+01c,29jun04,tcl 1.3 removed CR. Added two bytes offset support.
+01b,19jan04,tcl 1.2 removed i2cMsDelay and sysDecGet. renamed i2cMsDelay
+ back to sysMsDelay
+01a,19jan04,tcl 1.1 created and seperated from i2c.c
+*/
+
+/*
+DESCRIPTION
+This file contain I2C low level handling library functions
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <vxWorks.h>
+#include <sysLib.h>
+#include <iosLib.h>
+#include <logLib.h>
+#include <tickLib.h>
+
+/* BSP Includes */
+#include "config.h"
+#include "mpc8220.h"
+#include "i2cCore.h"
+
+#ifdef DEBUG_I2CCORE
+int I2CCDbg = 0;
+#endif
+
+#define ABS(x) ((x < 0)? -x : x)
+
+char *I2CERR[16] = {
+ "Transfer in Progress\n", /* 0 */
+ "Transfer complete\n",
+ "Not Addressed\n", /* 2 */
+ "Addressed as a slave\n",
+ "Bus is Idle\n", /* 4 */
+ "Bus is busy\n",
+ "Arbitration Lost\n", /* 6 */
+ "Arbitration on Track\n",
+ "Slave receive, master writing to slave\n", /* 8 */
+ "Slave transmit, master reading from slave\n",
+ "Interrupt is pending\n", /* 10 */
+ "Interrupt complete\n",
+ "Acknowledge received\n", /* 12 */
+ "No acknowledge received\n",
+ "Unknown status\n", /* 14 */
+ "\n"
+};
+
+/******************************************************************************
+ *
+ * chk_status - Check I2C status bit
+ *
+ * RETURNS: OK, or ERROR if the bit encounter
+ *
+ */
+
+STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse)
+{
+ int i, status = 0;
+
+ for (i = 0; i < I2C_POLL_COUNT; i++) {
+ if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
+ return (OK);
+ }
+
+ I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n",
+ pi2c->sr, sta_bit, truefalse, 0, 0, 0));
+
+ if (i == I2C_POLL_COUNT) {
+ switch (sta_bit) {
+ case I2C_STA_CF:
+ status = 0;
+ break;
+ case I2C_STA_AAS:
+ status = 2;
+ break;
+ case I2C_STA_BB:
+ status = 4;
+ break;
+ case I2C_STA_AL:
+ status = 6;
+ break;
+ case I2C_STA_SRW:
+ status = 8;
+ break;
+ case I2C_STA_IF:
+ status = 10;
+ break;
+ case I2C_STA_RXAK:
+ status = 12;
+ break;
+ default:
+ status = 14;
+ break;
+ }
+
+ if (!truefalse)
+ status++;
+
+ I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0));
+ I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0));
+ }
+
+ return (ERROR);
+}
+
+/******************************************************************************
+ *
+ * I2C Enable - Enable the I2C Controller
+ *
+ */
+STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet)
+{
+ int fdr = pi2cSet->bit_rate;
+ UINT8 adr = pi2cSet->i2c_adr;
+
+ I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0));
+
+ i2c_clear (pi2c); /* Clear FDR, ADR, SR and CR reg */
+
+ SetI2cFDR (pi2c, fdr); /* Frequency */
+ pi2c->adr = adr;
+
+ pi2c->cr = I2C_CTL_EN; /* Set Enable */
+
+ /*
+ The I2C bus should be in Idle state. If the bus is busy,
+ clear the STA bit in control register
+ */
+ if (chk_status (pi2c, I2C_STA_BB, 0) != OK) {
+ if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
+ pi2c->cr &= ~I2C_CTL_STA;
+
+ /* Check again if it is still busy, return error if found */
+ if (chk_status (pi2c, I2C_STA_BB, 1) == OK)
+ return ERROR;
+ }
+
+ return (OK);
+}
+
+/******************************************************************************
+ *
+ * I2C Disable - Disable the I2C Controller
+ *
+ */
+STATUS i2c_disable (PSI2C pi2c)
+{
+ i2c_clear (pi2c);
+
+ pi2c->cr &= I2C_CTL_EN; /* Disable I2c */
+
+ if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
+ pi2c->cr &= ~I2C_CTL_STA;
+
+ if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
+ return ERROR;
+
+ return (OK);
+}
+
+/******************************************************************************
+ *
+ * I2C Clear - Clear the I2C Controller
+ *
+ */
+STATUS i2c_clear (PSI2C pi2c)
+{
+ pi2c->adr = 0;
+ pi2c->fdr = 0;
+ pi2c->cr = 0;
+ pi2c->sr = 0;
+
+ return (OK);
+}
+
+
+STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet)
+{
+#ifdef TWOBYTES
+ UINT16 ByteOffset = pi2cSet->str_adr;
+#else
+ UINT8 ByteOffset = pi2cSet->str_adr;
+#endif
+#if 1
+ UINT8 tmp = 0;
+#endif
+ UINT8 Addr = pi2cSet->slv_adr;
+
+ pi2c->cr |= I2C_CTL_STA; /* Generate start signal */
+
+ if (chk_status (pi2c, I2C_STA_BB, 1) != OK)
+ return ERROR;
+
+ /* Write slave address */
+ if (i2c_writebyte (pi2c, &Addr) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+#ifdef TWOBYTES
+# if 0
+ /* Issue the offset to start */
+ if (i2c_write2byte (pi2c, &ByteOffset) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+#endif
+ tmp = (ByteOffset >> 8) & 0xff;
+ if (i2c_writebyte (pi2c, &tmp) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+ tmp = ByteOffset & 0xff;
+ if (i2c_writebyte (pi2c, &tmp) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+#else
+ if (i2c_writebyte (pi2c, &ByteOffset) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+#endif
+
+ return (OK);
+}
+
+STATUS i2c_stop (PSI2C pi2c)
+{
+ pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
+ if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
+ return ERROR;
+
+ return (OK);
+}
+
+/******************************************************************************
+ *
+ * Read Len bytes to the location pointed to by *Data from the device
+ * with address Addr.
+ */
+int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
+{
+ int i = 0;
+ UINT8 Tmp;
+
+/* UINT8 ByteOffset = pi2cSet->str_adr; not used? */
+ UINT8 Addr = pi2cSet->slv_adr;
+ int Length = pi2cSet->xfer_size;
+
+ I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n",
+ Addr, (int) Data, Length, ByteOffset, 0, 0));
+
+ if (pi2c->sr & I2C_STA_AL) { /* Check if Arbitration lost */
+ I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
+ pi2c->sr &= ~I2C_STA_AL; /* Clear Arbitration status bit */
+ return ERROR;
+ }
+
+ pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
+
+ if (i2c_start (pi2c, pi2cSet) == ERROR)
+ return ERROR;
+
+ pi2c->cr |= I2C_CTL_RSTA; /* Repeat Start */
+
+ Tmp = Addr | 1;
+
+ if (i2c_writebyte (pi2c, &Tmp) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+
+ if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
+ return ERROR;
+
+ pi2c->cr &= ~I2C_CTL_TX; /* Set receive mode */
+
+ if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
+ return ERROR;
+
+ /* Dummy Read */
+ if (i2c_readbyte (pi2c, &Tmp, &i) != OK) {
+ i2c_stop (pi2c); /* Disable I2c */
+ return ERROR;
+ }
+
+ i = 0;
+ while (Length) {
+ if (Length == 2)
+ pi2c->cr |= I2C_CTL_TXAK;
+
+ if (Length == 1)
+ pi2c->cr &= ~I2C_CTL_STA;
+
+ if (i2c_readbyte (pi2c, Data, &Length) != OK) {
+ return i2c_stop (pi2c);
+ }
+ i++;
+ Length--;
+ Data++;
+ }
+
+ if (i2c_stop (pi2c) == ERROR)
+ return ERROR;
+
+ return i;
+}
+
+STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
+{
+ int Length = pi2cSet->xfer_size;
+
+#ifdef TWOBYTES
+ UINT16 ByteOffset = pi2cSet->str_adr;
+#else
+ UINT8 ByteOffset = pi2cSet->str_adr;
+#endif
+ int j, k;
+
+ I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0));
+
+ if (pi2c->sr & I2C_STA_AL) {
+ /* Check if arbitration lost */
+ I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
+ pi2c->sr &= ~I2C_STA_AL; /* Clear the condition */
+ return ERROR;
+ }
+
+ pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
+
+ /* Do the not even offset first */
+ if ((ByteOffset % 8) != 0) {
+ int remain;
+
+ if (Length > 8) {
+ remain = 8 - (ByteOffset % 8);
+ Length -= remain;
+
+ pi2cSet->str_adr = ByteOffset;
+
+ if (i2c_start (pi2c, pi2cSet) == ERROR)
+ return ERROR;
+
+ for (j = ByteOffset; j < remain; j++) {
+ if (i2c_writebyte (pi2c, Data++) != OK)
+ return ERROR;
+ }
+
+ if (i2c_stop (pi2c) == ERROR)
+ return ERROR;
+
+ sysMsDelay (32);
+
+ /* Update the new ByteOffset */
+ ByteOffset += remain;
+ }
+ }
+
+ for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) {
+ if ((j % 8) == 0) {
+ pi2cSet->str_adr = j;
+ if (i2c_start (pi2c, pi2cSet) == ERROR)
+ return ERROR;
+ }
+
+ k++;
+
+ if (i2c_writebyte (pi2c, Data++) != OK)
+ return ERROR;
+
+ if ((j == (Length - 1)) || ((k % 8) == 0)) {
+ if (i2c_stop (pi2c) == ERROR)
+ return ERROR;
+
+ sysMsDelay (50);
+ }
+
+ }
+
+ return k;
+}
+
+STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index)
+{
+ pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
+ *readb = pi2c->dr; /* Read a byte */
+
+ /*
+ Set I2C_CTRL_TXAK will cause Transfer pending and
+ set I2C_CTRL_STA will cause Interrupt pending
+ */
+ if (*index != 2) {
+ if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
+ return ERROR;
+ }
+
+ if (*index != 1) {
+ if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
+ return ERROR;
+ }
+
+ return (OK);
+}
+
+
+STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb)
+{
+ pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt */
+ pi2c->dr = *writeb; /* Write a byte */
+
+ if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
+ return ERROR;
+
+ if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
+ return ERROR;
+
+ return OK;
+}
+
+STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
+{
+ UINT8 data;
+
+ data = (UINT8) ((*writeb >> 8) & 0xff);
+ if (i2c_writebyte (pi2c, &data) != OK)
+ return ERROR;
+ data = (UINT8) (*writeb & 0xff);
+ if (i2c_writebyte (pi2c, &data) != OK)
+ return ERROR;
+ return OK;
+}
+
+/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
+FDR FDR scl sda scl2tap2
+510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5
+000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0
+000 001 9 3 4 2 44 Clocks 11 Clocks 758 KHz 0 0 1 0 0 0
+000 010 9 3 6 4 80 Clocks 17 Clocks 417 KHz 0 0 0 1 0 0
+000 011 9 3 6 8 144 Clocks 25 Clocks 231 KHz 0 0 1 1 0 0
+000 100 9 3 14 16 288 Clocks 49 Clocks 116 KHz 0 0 0 0 1 0
+000 101 9 3 30 32 576 Clocks 97 Clocks 58 KHz 0 0 1 0 1 0
+000 110 9 3 62 64 1152 Clocks 193 Clocks 29 KHz 0 0 0 1 1 0
+000 111 9 3 126 128 2304 Clocks 385 Clocks 14 KHz 0 0 1 1 1 0
+001 000 10 3 4 1 30 Clocks 9 Clocks 1111 KHz1 0 0 0 0 0
+001 001 10 3 4 2 48 Clocks 11 Clocks 694 KHz 1 0 1 0 0 0
+001 010 10 3 6 4 88 Clocks 17 Clocks 379 KHz 1 0 0 1 0 0
+001 011 10 3 6 8 160 Clocks 25 Clocks 208 KHz 1 0 1 1 0 0
+001 100 10 3 14 16 320 Clocks 49 Clocks 104 KHz 1 0 0 0 1 0
+001 101 10 3 30 32 640 Clocks 97 Clocks 52 KHz 1 0 1 0 1 0
+001 110 10 3 62 64 1280 Clocks 193 Clocks 26 KHz 1 0 0 1 1 0
+001 111 10 3 126 128 2560 Clocks 385 Clocks 13 KHz 1 0 1 1 1 0
+010 000 12 4 4 1 34 Clocks 10 Clocks 980 KHz 0 1 0 0 0 0
+010 001 12 4 4 2 56 Clocks 13 Clocks 595 KHz 0 1 1 0 0 0
+010 010 12 4 6 4 104 Clocks 21 Clocks 321 KHz 0 1 0 1 0 0
+010 011 12 4 6 8 192 Clocks 33 Clocks 174 KHz 0 1 1 1 0 0
+010 100 12 4 14 16 384 Clocks 65 Clocks 87 KHz 0 1 0 0 1 0
+010 101 12 4 30 32 768 Clocks 129 Clocks 43 KHz 0 1 1 0 1 0
+010 110 12 4 62 64 1536 Clocks 257 Clocks 22 KHz 0 1 0 1 1 0
+010 111 12 4 126 128 3072 Clocks 513 Clocks 11 KHz 0 1 1 1 1 0
+011 000 15 4 4 1 40 Clocks 10 Clocks 833 KHz 1 1 0 0 0 0
+011 001 15 4 4 2 68 Clocks 13 Clocks 490 KHz 1 1 1 0 0 0
+011 010 15 4 6 4 128 Clocks 21 Clocks 260 KHz 1 1 0 1 0 0
+011 011 15 4 6 8 240 Clocks 33 Clocks 139 KHz 1 1 1 1 0 0
+011 100 15 4 14 16 480 Clocks 65 Clocks 69 KHz 1 1 0 0 1 0
+011 101 15 4 30 32 960 Clocks 129 Clocks 35 KHz 1 1 1 0 1 0
+011 110 15 4 62 64 1920 Clocks 257 Clocks 17 KHz 1 1 0 1 1 0
+011 111 15 4 126 128 3840 Clocks 513 Clocks 9 KHz 1 1 1 1 1 0
+100 000 5 1 4 1 20 Clocks 7 Clocks 1667 KHz 0 0 0 0 0 1
+100 001 5 1 4 2 28 Clocks 7 Clocks 1190 KHz 0 0 1 0 0 1
+100 010 5 1 6 4 48 Clocks 9 Clocks 694 KHz 0 0 0 1 0 1
+100 011 5 1 6 8 80 Clocks 9 Clocks 417 KHz 0 0 1 1 0 1
+100 100 5 1 14 16 160 Clocks 17 Clocks 208 KHz 0 0 0 0 1 1
+100 101 5 1 30 32 320 Clocks 33 Clocks 104 KHz 0 0 1 0 1 1
+100 110 5 1 62 64 640 Clocks 65 Clocks 52 KHz 0 0 0 1 1 1
+100 111 5 1 126 128 1280 Clocks 129 Clocks 26 KHz 0 0 1 1 1 1
+101 000 6 1 4 1 22 Clocks 7 Clocks 1515 KHz 1 0 0 0 0 1
+101 001 6 1 4 2 32 Clocks 7 Clocks 1042 KHz 1 0 1 0 0 1
+101 010 6 1 6 4 56 Clocks 9 Clocks 595 KHz 1 0 0 1 0 1
+101 011 6 1 6 8 96 Clocks 9 Clocks 347 KHz 1 0 1 1 0 1
+101 100 6 1 14 16 192 Clocks 17 Clocks 174 KHz 1 0 0 0 1 1
+101 101 6 1 30 32 384 Clocks 33 Clocks 87 KHz 1 0 1 0 1 1
+101 110 6 1 62 64 768 Clocks 65 Clocks 43 KHz 1 0 0 1 1 1
+101 111 6 1 126 128 1536 Clocks 129 Clocks 22 KHz 1 0 1 1 1 1
+110 000 7 2 4 1 24 Clocks 8 Clocks 1389 KHz 0 1 0 0 0 1
+110 001 7 2 4 2 36 Clocks 9 Clocks 926 KHz 0 1 1 0 0 1
+110 010 7 2 6 4 64 Clocks 13 Clocks 521 KHz 0 1 0 1 0 1
+110 011 7 2 6 8 112 Clocks 17 Clocks 298 KHz 0 1 1 1 0 1
+110 100 7 2 14 16 224 Clocks 33 Clocks 149 KHz 0 1 0 0 1 1
+110 101 7 2 30 32 448 Clocks 65 Clocks 74 KHz 0 1 1 0 1 1
+110 110 7 2 62 64 896 Clocks 129 Clocks 37 KHz 0 1 0 1 1 1
+110 111 7 2 126 128 1792 Clocks 257 Clocks 19 KHz 0 1 1 1 1 1
+111 000 8 2 4 1 26 Clocks 8 Clocks 1282 KHz 1 1 0 0 0 1
+111 001 8 2 4 2 40 Clocks 9 Clocks 833 KHz 1 1 1 0 0 1
+111 010 8 2 6 4 72 Clocks 13 Clocks 463 KHz 1 1 0 1 0 1
+111 011 8 2 6 8 128 Clocks 17 Clocks 260 KHz 1 1 1 1 0 1
+111 100 8 2 14 16 256 Clocks 33 Clocks 130 KHz 1 1 0 0 1 1
+111 101 8 2 30 32 512 Clocks 65 Clocks 65 KHz 1 1 1 0 1 1
+111 110 8 2 62 64 1024 Clocks 129 Clocks 33 KHz 1 1 0 1 1 1
+111 111 8 2 126 128 2048 Clocks 257 Clocks 16 KHz 1 1 1 1 1 1
+*/
+STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate)
+{
+/* Constants */
+ const UINT8 div_hold[8][3] = { {9, 3}, {10, 3},
+ {12, 4}, {15, 4},
+ {5, 1}, {6, 1},
+ {7, 2}, {8, 2}
+ };
+
+ const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2},
+ {6, 4}, {6, 8},
+ {14, 16}, {30, 32},
+ {62, 64}, {126, 128}
+ };
+
+ UINT8 mfdr_bits;
+
+ int i = 0;
+ int j = 0;
+
+ int Diff, min;
+ int WhichFreq, iRec, jRec;
+ int SCL_Period;
+ int SCL_Hold;
+ int I2C_Freq;
+
+ I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n",
+ bitrate, (int) pi2cRegs, 0, 0, 0, 0));
+
+ if (bitrate < 0) {
+ I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0));
+ return ERROR;
+ }
+
+ /* Initialize */
+ mfdr_bits = 0;
+ min = 0x7fffffff;
+ WhichFreq = iRec = jRec = 0;
+
+ for (i = 0; i < 8; i++) {
+ for (j = 0; j < 8; j++) {
+ /* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2)
+ * SCL Hold = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3
+ * Bit Rate (I2C Freq) = System Freq / SCL Period
+ */
+ SCL_Period =
+ 2 * (scl_tap[i][0] +
+ ((div_hold[j][0] - 1) * scl_tap[i][1]) +
+ 2);
+
+ /* Now get the I2C Freq */
+ I2C_Freq = DEV_CLOCK_FREQ / SCL_Period;
+
+ /* Take equal or slower */
+ if (I2C_Freq > bitrate)
+ continue;
+
+ /* Take the differences */
+ Diff = I2C_Freq - bitrate;
+
+ Diff = ABS (Diff);
+
+ /* Find the closer value */
+ if (Diff < min) {
+ min = Diff;
+ WhichFreq = I2C_Freq;
+ iRec = i;
+ jRec = j;
+ }
+
+ I2CCDBG (L2,
+ ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n",
+ i, j, I2C_Freq, Diff, min, 0));
+ }
+ }
+
+ SCL_Period =
+ 2 * (scl_tap[iRec][0] +
+ ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2);
+
+ I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n",
+ min, WhichFreq, iRec, jRec, 0, 0));
+ I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n",
+ scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1],
+ 0, 0, 0));
+
+ /* This may no require */
+ SCL_Hold =
+ scl_tap[iRec][0] +
+ ((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3;
+ I2CCDBG (L2,
+ ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0,
+ 0, 0, 0));
+
+ I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
+
+ /* FDR 4,3,2 */
+ if ((iRec & 1) == 1)
+ mfdr_bits |= 0x04; /* FDR 2 */
+ if ((iRec & 2) == 2)
+ mfdr_bits |= 0x08; /* FDR 3 */
+ if ((iRec & 4) == 4)
+ mfdr_bits |= 0x10; /* FDR 4 */
+ /* FDR 5,1,0 */
+ if ((jRec & 1) == 1)
+ mfdr_bits |= 0x01; /* FDR 0 */
+ if ((jRec & 2) == 2)
+ mfdr_bits |= 0x02; /* FDR 1 */
+ if ((jRec & 4) == 4)
+ mfdr_bits |= 0x20; /* FDR 5 */
+
+ I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
+
+ pi2cRegs->fdr = mfdr_bits;
+
+ return OK;
+}
--- /dev/null
+/*
+ * i2cCore.h
+ *
+ * Prototypes, etc. for the Motorola MPC8220
+ * embedded cpu chips
+ *
+ * 2004 (c) Freescale, Inc.
+ * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __INCi2ccoreh
+#define __INCi2ccoreh
+#ifndef __ASSEMBLY__
+/* device types */
+#define I2C_DEVICE_TYPE_EEPROM 0
+#define I2C_EEPROM_ADRS 0xa0
+#define I2C_CTRL_ADRS I2C_EEPROM_ADRS
+#define EEPROM_ADDR0 0xA2 /* on Dimm SPD eeprom */
+#define EEPROM_ADDR1 0xA4 /* on Board SPD eeprom */
+#define EEPROM_ADDR2 0xD2 /* non-standard eeprom - clock generator */
+/* Control Register */
+#define I2C_CTL_EN 0x80 /* I2C Enable */
+#define I2C_CTL_IEN 0x40 /* I2C Interrupt Enable */
+#define I2C_CTL_STA 0x20 /* Master/Slave Mode select */
+#define I2C_CTL_TX 0x10 /* Transmit/Receive Mode Select */
+#define I2C_CTL_TXAK 0x08 /* Transmit Acknowledge Enable */
+#define I2C_CTL_RSTA 0x04 /* Repeat Start */
+/* Status Register */
+#define I2C_STA_CF 0x80 /* Data Transfer */
+#define I2C_STA_AAS 0x40 /* Adressed As Slave */
+#define I2C_STA_BB 0x20 /* Bus Busy */
+#define I2C_STA_AL 0x10 /* Arbitration Lost */
+#define I2C_STA_SRW 0x04 /* Slave Read/Write */
+#define I2C_STA_IF 0x02 /* I2C Interrupt */
+#define I2C_STA_RXAK 0x01 /* Receive Acknowledge */
+/* Interrupt Contol Register */
+#define I2C_INT_BNBE2 0x80 /* Bus Not Busy Enable 2 */
+#define I2C_INT_TE2 0x40 /* Transmit Enable 2 */
+#define I2C_INT_RE2 0x20 /* Receive Enable 2 */
+#define I2C_INT_IE2 0x10 /* Interrupt Enable 2 */
+#define I2C_INT_BNBE1 0x08 /* Bus Not Busy Enable 1 */
+#define I2C_INT_TE1 0x04 /* Transmit Enable 1 */
+#define I2C_INT_RE1 0x02 /* Receive Enable 1 */
+#define I2C_INT_IE1 0x01 /* Interrupt Enable 1 */
+#define I2C_POLL_COUNT 0x100000
+#define I2C_ENABLE 0x00000001
+#define I2C_DISABLE 0x00000002
+#define I2C_START 0x00000004
+#define I2C_REPSTART 0x00000008
+#define I2C_STOP 0x00000010
+#define I2C_BITRATE 0x00000020
+#define I2C_SLAVEADR 0x00000040
+#define I2C_STARTADR 0x00000080
+#undef TWOBYTES
+typedef struct i2c_settings {
+ /* Device settings */
+ int bit_rate; /* Device bit rate */
+ u8 i2c_adr; /* I2C address */
+ u8 slv_adr; /* Slave address */
+#ifdef TWOBYTES
+ u16 str_adr; /* Start address */
+#else
+ u8 str_adr; /* Start address */
+#endif
+ int xfer_size; /* Transfer Size */
+
+ int bI2c_en; /* Enable or Disable */
+ int cmdFlag; /* I2c Command Flags */
+} i2cset_t;
+
+/*
+int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse);
+int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet);
+int i2c_disable(PSI2C pi2c);
+int i2c_start(PSI2C pi2c, PI2CSET pi2cSet);
+int i2c_stop(PSI2C pi2c);
+int i2c_clear(PSI2C pi2c);
+int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
+int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
+int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index);
+int i2c_writebyte(PSI2C pi2c, u8 *writeb);
+int SetI2cFDR( PSI2C pi2cRegs, int bitrate );
+*/
+#endif /* __ASSEMBLY__ */
+
+#endif /* __INCi2ccoreh */
--- /dev/null
+/*
+ * (C) Copyright -2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * interrupts.c - just enough support for the decrementer/timer
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+
+int interrupt_init_cpu (ulong * decrementer_count)
+{
+ *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+ puts ("external_interrupt (oops!)\n");
+}
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
+{
+
+}
+
+void irq_free_handler (int vec)
+{
+
+}
+
+/****************************************************************************/
+
+void
+do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ puts ("IRQ related functions are unimplemented currently.\n");
+}
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0(3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,0,r3
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0(r3)
+ sync
+ blr
+
+/* ------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/* ------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,0,r3
+ sync
+ blr
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on code
+ * (C) Copyright Motorola, Inc., 2000
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+
+/* Multichannel DMA microcode */
+extern int taskTable;
+
+void loadtask (int basetask, int tasks)
+{
+ int *sram = (int *) (MMAP_SRAM + 512);
+ int *task_org = &taskTable;
+ unsigned int start, offset, end;
+ int i;
+
+#ifdef DEBUG
+ printf ("basetask = %d, tasks = %d\n", basetask, tasks);
+ printf ("task_org = 0x%08x\n", (unsigned int) task_org);
+#endif
+
+ /* setup TaskBAR register */
+ *(vu_long *) MMAP_DMA = (MMAP_SRAM + 512);
+
+ /* relocate task table entries */
+ offset = (unsigned int) sram;
+ for (i = basetask; i < basetask + tasks; i++) {
+ sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
+ sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
+ sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
+ sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
+ sram[i * 8 + 4] = task_org[i * 8 + 4];
+ sram[i * 8 + 5] = task_org[i * 8 + 5];
+ sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
+ sram[i * 8 + 7] = task_org[i * 8 + 7];
+ }
+
+ /* relocate task descriptors */
+ start = (sram[basetask * 8] - (unsigned int) sram);
+ end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram);
+
+#ifdef DEBUG
+ printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
+#endif
+
+ start /= 4;
+ end /= 4;
+ for (i = start; i <= end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ /* relocate variables */
+ start = (sram[basetask * 8 + 2] - (unsigned int) sram);
+ end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 -
+ (unsigned int) sram);
+ start /= 4;
+ end /= 4;
+ for (i = start; i < end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ /* relocate function decriptors */
+ start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram);
+ end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 -
+ (unsigned int) sram);
+ start /= 4;
+ end /= 4;
+ for (i = start; i < end; i++) {
+ sram[i] = task_org[i];
+ }
+
+ asm volatile ("sync");
+}
--- /dev/null
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI Configuration space access support for MPC8220 PCI Bridge
+ */
+#include <common.h>
+#include <mpc8220.h>
+#include <pci.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+
+/* System RAM mapped over PCI */
+#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
+
+#define cfg_read(val, addr, type, op) *val = op((type)(addr));
+#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
+
+#define PCI_OP(rw, size, type, op, mask) \
+int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ u32 addr = 0; \
+ u16 cfg_type = 0; \
+ addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
+ out_be32(hose->cfg_addr, addr); \
+ __asm__ __volatile__("sync"); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
+ out_be32(hose->cfg_addr, addr & 0x7fffffff); \
+ __asm__ __volatile__("sync"); \
+ return 0; \
+}
+
+PCI_OP(read, byte, u8 *, in_8, 3)
+PCI_OP(read, word, u16 *, in_le16, 2)
+PCI_OP(write, byte, u8, out_8, 3)
+PCI_OP(write, word, u16, out_le16, 2)
+PCI_OP(write, dword, u32, out_le32, 0)
+
+int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
+ int offset, u32 *val)
+{
+ u32 addr;
+ u32 tmpv;
+ u32 mask = 2; /* word access */
+ /* Read lower 16 bits */
+ addr = ((offset & 0xfc) | (dev) | 0x80000000);
+ out_be32(hose->cfg_addr, addr);
+ __asm__ __volatile__("sync");
+ *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
+ out_be32(hose->cfg_addr, addr & 0x7fffffff);
+ __asm__ __volatile__("sync");
+
+ /* Read upper 16 bits */
+ offset += 2;
+ addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
+ out_be32(hose->cfg_addr, addr);
+ __asm__ __volatile__("sync");
+ tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
+ out_be32(hose->cfg_addr, addr & 0x7fffffff);
+ __asm__ __volatile__("sync");
+
+ /* combine results into dword value */
+ *val = (tmpv << 16) | *val;
+
+ return 0;
+}
+
+void
+pci_mpc8220_init(struct pci_controller *hose)
+{
+ u32 win0, win1, win2;
+ volatile mpc8220_xcpci_t *xcpci =
+ (volatile mpc8220_xcpci_t *) MMAP_XCPCI;
+
+ volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
+
+ win0 = (u32) CONFIG_PCI_MEM_PHYS;
+ win1 = (u32) CONFIG_PCI_IO_PHYS;
+ win2 = (u32) CONFIG_PCI_CFG_PHYS;
+
+ /* Assert PCI reset */
+ out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
+
+ /* Disable prefetching but read-multiples will still prefetch */
+ out_be32 (&xcpci->target_ctrl, 0x00000000);
+
+ /* Initiator windows */
+ out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000);
+ out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
+ out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
+
+ out_be32 (&xcpci->init_win_cfg,
+ PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
+ PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
+ PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
+
+ out_be32 (&xcpci->init_ctrl, 0x00000000);
+
+ /* Enable bus master and mem access */
+ out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
+
+ /* Cache line size and master latency */
+ out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
+
+ out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
+ out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
+
+ out_be32 (&xcpci->target_bar0,
+ PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
+ out_be32 (&xcpci->target_bar1,
+ PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
+
+ /* Deassert reset bit */
+ out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
+
+ /* Enable PCI bus master support */
+ /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
+ PCIREQ2, PCIGNT2 */
+ out_be32((volatile u32 *)&portcfg->pcfg3,
+ (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
+ out_be32((volatile u32 *)&portcfg->pcfg3,
+ (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ CONFIG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 3;
+
+ hose->cfg_addr = &(xcpci->cfg_adr);
+ hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
+
+ pci_set_ops(hose,
+ mpc8220_pci_read_config_byte,
+ mpc8220_pci_read_config_word,
+ mpc8220_pci_read_config_dword,
+ mpc8220_pci_write_config_byte,
+ mpc8220_pci_write_config_word,
+ mpc8220_pci_write_config_dword);
+
+ /* Hose scan */
+ pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan(hose);
+
+ out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
+ out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
+}
+
+#endif /* CONFIG_PCI */
--- /dev/null
+/*
+ * (C) Copyright 2004, Freescale, Inc
+ * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+typedef struct pllmultiplier {
+ u8 hid1;
+ int multi;
+ int vco_div;
+} pllcfg_t;
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ *
+ */
+
+int get_clocks (void)
+{
+ pllcfg_t bus2core[] = {
+ {0x02, 2, 8}, /* 1 */
+ {0x01, 2, 4},
+ {0x0C, 3, 8}, /* 1.5 */
+ {0x00, 3, 4},
+ {0x18, 3, 2},
+ {0x05, 4, 4}, /* 2 */
+ {0x04, 4, 2},
+ {0x11, 5, 4}, /* 2.5 */
+ {0x06, 5, 2},
+ {0x10, 6, 4}, /* 3 */
+ {0x08, 6, 2},
+ {0x0E, 7, 2}, /* 3.5 */
+ {0x0A, 8, 2}, /* 4 */
+ {0x07, 9, 2}, /* 4.5 */
+ {0x0B, 10, 2}, /* 5 */
+ {0x09, 11, 2}, /* 5.5 */
+ {0x0D, 12, 2}, /* 6 */
+ {0x12, 13, 2}, /* 6.5 */
+ {0x14, 14, 2}, /* 7 */
+ {0x16, 15, 2}, /* 7.5 */
+ {0x1C, 16, 2} /* 8 */
+ };
+ u32 hid1;
+ int i, size, pci2bus;
+
+#if !defined(CONFIG_SYS_MPC8220_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
+#endif
+
+ gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
+
+ /* Read XLB to PCI(INP) clock multiplier */
+ pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
+ PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
+
+ /* XLB bus clock */
+ gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
+
+ /* PCI clock is same as input clock */
+ gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
+
+ /* FlexBus is temporary set as the same as input clock */
+ /* will do dynamic in the future */
+ gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
+
+ /* CPU Clock - Read HID1 */
+ asm volatile ("mfspr %0, 1009":"=r" (hid1):);
+
+ size = sizeof (bus2core) / sizeof (pllcfg_t);
+
+ hid1 >>= 27;
+
+ for (i = 0; i < size; i++)
+ if (hid1 == bus2core[i].hid1) {
+ gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
+ gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
+ break;
+ }
+
+ /* hardcoded 81MHz for now */
+ gd->pev_clk = 81000000;
+
+ return (0);
+}
+
+int prt_mpc8220_clks (void)
+{
+ char buf1[32], buf2[32], buf3[32], buf4[32];
+
+ printf (" Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
+ strmhz(buf1, gd->bus_clk),
+ strmhz(buf2, gd->cpu_clk),
+ strmhz(buf3, gd->pci_clk),
+ strmhz(buf4, gd->vco_clk)
+ );
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC8220 CPUs
+ */
+#include <config.h>
+#include <mpc8220.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+/* Floating Point enable, Machine Check and Recoverable Interr. */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * Version string
+ */
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+/*
+ * Exception vectors
+ */
+ .text
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On */
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+boot_warm:
+ mfmsr r5 /* save msr contents */
+
+ /* replace default MBAR base address from 0x80000000
+ to 0xf0000000 */
+
+#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
+ lis r3, CONFIG_SYS_MBAR@h
+ ori r3, r3, CONFIG_SYS_MBAR@l
+
+ /* MBAR is mirrored into the MBAR SPR */
+ mtspr MBAR,r3
+ mtspr SPRN_SPRG7W,r3
+ lis r4, CONFIG_SYS_DEFAULT_MBAR@h
+ stw r3, 0(r4)
+#endif /* CONFIG_SYS_DEFAULT_MBAR */
+
+ /* Initialise the MPC8220 processor core */
+ /*--------------------------------------------------------------*/
+
+ bl init_8220_core
+
+ /* initialize some things that are hard to access from C */
+ /*--------------------------------------------------------------*/
+
+ /* set up stack in on-chip SRAM */
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+ ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*--------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (in Flash)*/
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/*
+ * This code initialises the MPC8220 processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+
+ .globl init_8220_core
+init_8220_core:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*--------------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*--------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_HID0_INIT@h
+ ori r3, r3, CONFIG_SYS_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID0_FINAL@h
+ ori r3, r3, CONFIG_SYS_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ /* Enable Extra BATs */
+ mfspr r3, 1011 /* HID2 */
+ lis r4, 0x0004
+ ori r4, r4, 0x0000
+ or r4, r4, r3
+ mtspr 1011, r4
+ sync
+
+ /* clear all BAT's */
+ /*--------------------------------------------------------------*/
+
+ li r0, 0
+ mtspr DBAT0U, r0
+ mtspr DBAT0L, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT1L, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT2L, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT3L, r0
+ mtspr DBAT4U, r0
+ mtspr DBAT4L, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT5L, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT6L, r0
+ mtspr DBAT7U, r0
+ mtspr DBAT7L, r0
+ mtspr IBAT0U, r0
+ mtspr IBAT0L, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT1L, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT2L, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT3L, r0
+ mtspr IBAT4U, r0
+ mtspr IBAT4L, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT5L, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT6L, r0
+ mtspr IBAT7U, r0
+ mtspr IBAT7L, r0
+ SYNC
+
+ /* invalidate all tlb's */
+ /* */
+ /* From the 603e User Manual: "The 603e provides the ability to */
+ /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
+ /* instruction invalidates the TLB entry indexed by the EA, and */
+ /* operates on both the instruction and data TLBs simultaneously*/
+ /* invalidating four TLB entries (both sets in each TLB). The */
+ /* index corresponds to bits 15-19 of the EA. To invalidate all */
+ /* entries within both TLBs, 32 tlbie instructions should be */
+ /* issued, incrementing this field by one each time." */
+ /* */
+ /* "Note that the tlbia instruction is not implemented on the */
+ /* 603e." */
+ /* */
+ /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
+ /* incrementing by 0x1000 each time. The code below is sort of */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
+ /* */
+ /*--------------------------------------------------------------*/
+
+ li r3, 32
+ mtctr r3
+ li r3, 0
+1: tlbie r3
+ addi r3, r3, 0x1000
+ bdnz 1b
+ SYNC
+
+ /* Done! */
+ /*--------------------------------------------------------------*/
+
+ blr
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ lis r4, 0
+ ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */
+ rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
+
+ /*
+ * The setting of the instruction cache enable (ICE) bit must be
+ * preceded by an isync instruction to prevent the cache from being
+ * enabled or disabled while an instruction access is in progress.
+ */
+ isync
+ mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
+ mtspr HID0, r3 /* using 2 consec instructions */
+ isync
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ rlwinm r3, r3, 0, 17, 15 /* clear the ICE bit */
+ mtspr HID0, r3
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ lis r4, 0
+ ori r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit */
+ rlwinm r3, r4, 0, 22, 20 /* clear the DCFI bit */
+
+ /* Enable address translation in MSR bit */
+ mfmsr r5
+ ori r5, r5, 0x
+
+
+ /*
+ * The setting of the instruction cache enable (ICE) bit must be
+ * preceded by an isync instruction to prevent the cache from being
+ * enabled or disabled while an instruction access is in progress.
+ */
+ isync
+ mtspr HID0, r4 /* Enable Data Cache & Inval cache*/
+ mtspr HID0, r3 /* using 2 consec instructions */
+ isync
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ rlwinm r3, r3, 0, 18, 16 /* clear the DCE bit */
+ mtspr HID0, r3
+ isync
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
+ rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 9f
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
+ rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 7f
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table (unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+void print_backtrace (unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf ("Call backtrace: ");
+ while (sp) {
+ if ((uint) sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf ("\n");
+ printf ("%08lX ", i);
+ if (cnt > 32)
+ break;
+ sp = (unsigned long *) *sp;
+ }
+ printf ("\n");
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ int i;
+
+ printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr,
+ regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
+ regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
+
+ printf ("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf ("GPR%02d: ", i);
+ }
+
+ printf ("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ printf ("\n");
+ }
+ }
+}
+
+
+void _exception (int signr, struct pt_regs *regs)
+{
+ show_regs (regs);
+ print_backtrace ((unsigned long *) regs->gpr[1]);
+ panic ("Exception in kernel pc %lx signal %d", regs->nip, signr);
+}
+
+void MachineCheckException (struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table (regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler
+ && (*debugger_exception_handler) (regs))
+ return;
+#endif
+
+ printf ("Machine check in kernel mode.\n");
+ printf ("Caused by (from msr): ");
+ printf ("regs %p ", regs);
+ /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
+ switch (regs->msr & 0x000F0000) {
+ case (0x80000000 >> 12):
+ printf ("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000 >> 13):
+ printf ("Transfer error ack signal\n");
+ break;
+ case (0x80000000 >> 14):
+ printf ("Data parity signal\n");
+ break;
+ case (0x80000000 >> 15):
+ printf ("Address parity signal\n");
+ break;
+ default:
+ printf ("Unknown values in msr\n");
+ }
+ show_regs (regs);
+ print_backtrace ((unsigned long *) regs->gpr[1]);
+ panic ("machine check");
+}
+
+void AlignmentException (struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler
+ && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *) regs->gpr[1]);
+ panic ("Alignment Exception");
+}
+
+void ProgramCheckException (struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler
+ && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *) regs->gpr[1]);
+ panic ("Program Check Exception");
+}
+
+void SoftEmuException (struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler
+ && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs (regs);
+ print_backtrace ((unsigned long *) regs->gpr[1]);
+ panic ("Software Emulation Exception");
+}
+
+
+void UnknownException (struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler
+ && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception (0, regs);
+}
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint (struct pt_regs *);
+#endif
+
+void DebugException (struct pt_regs *regs)
+{
+
+ printf ("Debugger trap at @ %lx\n", regs->nip);
+ show_regs (regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint (regs);
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int addr_probe (uint * addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__ ("1: lwz %0,0(%1)\n"
+ " eieio\n"
+ " li %0,0\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: li %0,-1\n"
+ " b 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 2\n"
+ " .long 1b,3b\n"
+ ".text":"=r" (retval):"r" (addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc8220/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2004, Freescale, Inc
+ * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Minimal serial functions needed to use one of the PSC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <mpc8220.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PSC_BASE MMAP_PSC1
+
+#if defined(CONFIG_PSC_CONSOLE)
+int serial_init (void)
+{
+ volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
+ u32 counter;
+
+ /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
+ psc->cr = 0;
+ psc->ipcr_acr = 0;
+ psc->isr_imr = 0;
+
+ /* write to CSR: RX/TX baud rate from timers */
+ psc->sr_csr = 0xdd000000;
+
+ psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1;
+
+ /* Setting up BaudRate */
+ counter = ((gd->bus_clk / gd->baudrate)) >> 5;
+ counter++;
+
+ /* write to CTUR: divide counter upper byte */
+ psc->ctur = ((counter & 0xff00) << 16);
+ /* write to CTLR: divide counter lower byte */
+ psc->ctlr = ((counter & 0x00ff) << 24);
+
+ psc->cr = PSC_CR_RST_RX_CMD;
+ psc->cr = PSC_CR_RST_TX_CMD;
+ psc->cr = PSC_CR_RST_ERR_STS_CMD;
+ psc->cr = PSC_CR_RST_BRK_INT_CMD;
+ psc->cr = PSC_CR_RST_MR_PTR_CMD;
+
+ psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
+ return (0);
+}
+
+void serial_putc (const char c)
+{
+ volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
+
+ if (c == '\n')
+ serial_putc ('\r');
+
+ /* Wait for last character to go. */
+ while (!(psc->sr_csr & PSC_SR_TXRDY));
+
+ psc->xmitbuf[0] = c;
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc (void)
+{
+ volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
+
+ /* Wait for a character to arrive. */
+ while (!(psc->sr_csr & PSC_SR_RXRDY));
+ return psc->xmitbuf[2];
+}
+
+int serial_tstc (void)
+{
+ volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
+
+ return (psc->sr_csr & PSC_SR_RXRDY);
+}
+
+void serial_setbrg (void)
+{
+ volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
+ u32 counter;
+
+ counter = ((gd->bus_clk / gd->baudrate)) >> 5;
+ counter++;
+
+ /* write to CTUR: divide counter upper byte */
+ psc->ctur = ((counter & 0xff00) << 16);
+ /* write to CTLR: divide counter lower byte */
+ psc->ctlr = ((counter & 0x00ff) << 24);
+
+ psc->cr = PSC_CR_RST_RX_CMD;
+ psc->cr = PSC_CR_RST_TX_CMD;
+
+ psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
+}
+#endif /* CONFIG_PSC_CONSOLE */
--- /dev/null
+/bedbug_603e.c
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)drivers/epic)
+$(shell mkdir -p $(obj)drivers/i2c)
+endif
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
+ drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
+COBJS_LN = bedbug_603e.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+$(obj)bedbug_603e.c:
+ ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc824x/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <mpc824x.h>
+#include <common.h>
+#include <command.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ unsigned int pvr = get_pvr ();
+ unsigned int version = pvr >> 16;
+ unsigned char revision;
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+
+ puts ("CPU: ");
+
+ switch (version) {
+ case CPU_TYPE_8240:
+ puts ("MPC8240");
+ break;
+
+ case CPU_TYPE_8245:
+ puts ("MPC8245");
+ break;
+
+ default:
+ return -1; /*not valid for this source */
+ }
+
+ CONFIG_READ_BYTE (REVID, revision);
+
+ if (revision) {
+ printf (" Revision %d.%d",
+ (revision & 0xf0) >> 4,
+ (revision & 0x0f));
+ } else {
+ return -1; /* no valid CPU revision info */
+ }
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ puts ("\n");
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache */
+
+int checkicache (void)
+{
+ /*TODO*/
+ return 128 * 4 * 32;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache */
+
+int checkdcache (void)
+{
+ /*TODO*/
+ return 128 * 4 * 32;
+
+};
+
+/*------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr, addr;
+
+ /* Interrupts and MMU off */
+ __asm__ ("mtspr 81, 0");
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~0x1030;
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+ * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
+ * address. Better pick an address known to be invalid on
+ * your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ * This is the sys_logic_clk (memory bus) divided by 4
+ */
+unsigned long get_tbclk (void)
+{
+ return ((get_bus_freq (0) + 2L) / 4L);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * The MPC824x has an integrated PCI controller known as the MPC107.
+ * The following are MPC107 Bridge Controller and PCI Support functions
+ *
+ */
+
+/*
+ * This procedure reads a 32-bit address MPC107 register, and returns
+ * a 32 bit value. It swaps the address to little endian before
+ * writing it to config address, and swaps the value to big endian
+ * before returning to the caller.
+ */
+unsigned int mpc824x_mpc107_getreg (unsigned int regNum)
+{
+ unsigned int temp;
+
+ /* swap the addr. to little endian */
+ *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
+ temp = *(volatile unsigned int *) CHRP_REG_DATA;
+ return PCISWAP (temp); /* swap the data upon return */
+}
+
+/*
+ * This procedure writes a 32-bit address MPC107 register. It swaps
+ * the address to little endian before writing it to config address.
+ */
+
+void mpc824x_mpc107_setreg (unsigned int regNum, unsigned int regVal)
+{
+ /* swap the addr. to little endian */
+ *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
+ *(volatile unsigned int *) CHRP_REG_DATA = PCISWAP (regVal);
+ return;
+}
+
+
+/*
+ * Write a byte (8 bits) to a memory location.
+ */
+void mpc824x_mpc107_write8 (unsigned int addr, unsigned char data)
+{
+ *(unsigned char *) addr = data;
+ __asm__ ("sync");
+}
+
+/*
+ * Write a word (16 bits) to a memory location after the value
+ * has been byte swapped (big to little endian or vice versa)
+ */
+
+void mpc824x_mpc107_write16 (unsigned int address, unsigned short data)
+{
+ *(volatile unsigned short *) address = BYTE_SWAP_16_BIT (data);
+ __asm__ ("sync");
+}
+
+/*
+ * Write a long word (32 bits) to a memory location after the value
+ * has been byte swapped (big to little endian or vice versa)
+ */
+
+void mpc824x_mpc107_write32 (unsigned int address, unsigned int data)
+{
+ *(volatile unsigned int *) address = LONGSWAP (data);
+ __asm__ ("sync");
+}
+
+/*
+ * Read a byte (8 bits) from a memory location.
+ */
+unsigned char mpc824x_mpc107_read8 (unsigned int addr)
+{
+ return *(volatile unsigned char *) addr;
+}
+
+
+/*
+ * Read a word (16 bits) from a memory location, and byte swap the
+ * value before returning to the caller.
+ */
+unsigned short mpc824x_mpc107_read16 (unsigned int address)
+{
+ unsigned short retVal;
+
+ retVal = BYTE_SWAP_16_BIT (*(unsigned short *) address);
+ return retVal;
+}
+
+
+/*
+ * Read a long word (32 bits) from a memory location, and byte
+ * swap the value before returning to the caller.
+ */
+unsigned int mpc824x_mpc107_read32 (unsigned int address)
+{
+ unsigned int retVal;
+
+ retVal = LONGSWAP (*(unsigned int *) address);
+ return (retVal);
+}
+
+
+/*
+ * Read a register in the Embedded Utilities Memory Block address
+ * space.
+ * Input: regNum - register number + utility base address. Example,
+ * the base address of EPIC is 0x40000, the register number
+ * being passed is 0x40000+the address of the target register.
+ * (See epic.h for register addresses).
+ * Output: The 32 bit little endian value of the register.
+ */
+
+unsigned int mpc824x_eummbar_read (unsigned int regNum)
+{
+ unsigned int temp;
+
+ temp = *(volatile unsigned int *) (EUMBBAR_VAL + regNum);
+ temp = PCISWAP (temp);
+ return temp;
+}
+
+
+/*
+ * Write a value to a register in the Embedded Utilities Memory
+ * Block address space.
+ * Input: regNum - register number + utility base address. Example,
+ * the base address of EPIC is 0x40000, the register
+ * number is 0x40000+the address of the target register.
+ * (See epic.h for register addresses).
+ * regVal - value to be written to the register.
+ */
+
+void mpc824x_eummbar_write (unsigned int regNum, unsigned int regVal)
+{
+ *(volatile unsigned int *) (EUMBBAR_VAL + regNum) = PCISWAP (regVal);
+ return;
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <mpc824x.h>
+
+#ifndef CONFIG_SYS_BANK0_ROW
+#define CONFIG_SYS_BANK0_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK1_ROW
+#define CONFIG_SYS_BANK1_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK2_ROW
+#define CONFIG_SYS_BANK2_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK3_ROW
+#define CONFIG_SYS_BANK3_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK4_ROW
+#define CONFIG_SYS_BANK4_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK5_ROW
+#define CONFIG_SYS_BANK5_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK6_ROW
+#define CONFIG_SYS_BANK6_ROW 0
+#endif
+#ifndef CONFIG_SYS_BANK7_ROW
+#define CONFIG_SYS_BANK7_ROW 0
+#endif
+#ifndef CONFIG_SYS_DBUS_SIZE2
+#define CONFIG_SYS_DBUS_SIZE2 0
+#endif
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ */
+void
+cpu_init_f (void)
+{
+/* MOUSSE board is initialized in asm */
+#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
+ register unsigned long val;
+ CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
+/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
+
+#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62)
+/* Why is this here, you ask? Try, just try setting 0x8000
+ * in PCIACR with CONFIG_WRITE_HALFWORD()
+ * this one was a stumper, and we are annoyed
+ */
+
+#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
+ __asm__ __volatile__(" \
+ stw %2,0(%0)\n \
+ sync\n \
+ sth %3,2(%1)\n \
+ sync\n \
+ " \
+ : /* no output */ \
+ : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
+ "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
+ );
+
+ M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
+#endif
+
+ CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
+ CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
+ /*
+ * Note that although this bit is cleared after a hard reset, it
+ * must be explicitly set and then cleared by software during
+ * initialization in order to guarantee correct operation of the
+ * DLL and the SDRAM_CLK[0:3] signals (if they are used).
+ */
+ CONFIG_READ_BYTE (AMBOR, val);
+ CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
+ CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
+ CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
+#ifdef CONFIG_MPC8245
+ /* silicon bug 28 MPC8245 */
+ CONFIG_READ_BYTE(AMBOR,val);
+ CONFIG_WRITE_BYTE(AMBOR,val|0x1);
+
+#if 0
+ /*
+ * The following bug only affects older (XPC8245) processors.
+ * DMA transfers initiated by external devices get corrupted due
+ * to a hardware scheduling problem.
+ *
+ * The effect is:
+ * when transferring X words, the first 32 words are transferred
+ * OK, the next 3 x 32 words are 'old' data (from previous DMA)
+ * while the rest of the X words is xferred fine.
+ *
+ * Disabling 3 of the 4 32 word hardware buffers solves the problem
+ * with no significant performance loss.
+ */
+
+ CONFIG_READ_BYTE(PCMBCR,val);
+ /* in order not to corrupt data which is being read over the PCI bus
+ * with the PPC as slave, we need to reduce the number of PCMRBs to 1,
+ * 4.11 in the processor user manual
+ * */
+
+#if 1
+ CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
+#else
+ CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
+ CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
+ /* default, 4 PCMRBs are used */
+#endif
+#endif
+#endif
+
+ CONFIG_READ_WORD(PICR1, val);
+#if defined(CONFIG_MPC8240)
+ CONFIG_WRITE_WORD( PICR1,
+ (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
+ PIRC1_MSK | PICR1_PROC_TYPE_603E |
+ PICR1_FLASH_WR_EN | PICR1_MCP_EN |
+ PICR1_CF_DPARK | PICR1_EN_PCS |
+ PICR1_CF_APARK );
+#elif defined(CONFIG_MPC8245)
+ CONFIG_WRITE_WORD( PICR1,
+ (val & (PICR1_RCS0)) |
+ PICR1_PROC_TYPE_603E |
+ PICR1_FLASH_WR_EN | PICR1_MCP_EN |
+ PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
+ PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+
+ CONFIG_READ_WORD(PICR2, val);
+ val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
+#ifndef CONFIG_PN62
+ val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
+#endif
+ CONFIG_WRITE_WORD(PICR2, val);
+
+ CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
+#ifndef CONFIG_SYS_RAMBOOT
+ CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
+ (CONFIG_SYS_BANK0_ROW) |
+ (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
+ (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
+ (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
+ (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
+ (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
+ (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
+ (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
+ (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
+#endif
+
+#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
+ CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
+ CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
+ CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
+#else
+ CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
+#endif
+
+#if defined(CONFIG_MPC8240)
+ CONFIG_WRITE_WORD(MCCR3,
+ (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+ (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
+ (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT));
+#elif defined(CONFIG_MPC8245)
+ CONFIG_WRITE_WORD(MCCR3,
+ (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+ (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+
+/* this is gross. We think these should all be the same, and various boards
+ * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
+ * its not set, we define it to zero in this file
+ */
+#if defined(CONFIG_CU824) || defined(CONFIG_PN62)
+ CONFIG_WRITE_WORD(MCCR4,
+ (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+ (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+ MCCR4_BIT21 |
+ (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+ ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+ (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
+ CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
+ (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
+ (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
+#elif defined(CONFIG_MPC8240)
+ CONFIG_WRITE_WORD(MCCR4,
+ (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+ (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+ MCCR4_BIT21 |
+ (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+ ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+ (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
+ (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
+ (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
+#elif defined(CONFIG_MPC8245)
+ CONFIG_READ_WORD(MCCR1, val);
+ val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
+
+ CONFIG_WRITE_WORD(MCCR4,
+ (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+ (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+ (CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
+ (CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
+ (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+ ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+ (CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
+ (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
+ (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
+ (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
+ (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+
+ CONFIG_WRITE_WORD(MSAR1,
+ ( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+ (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(EMSAR1,
+ ( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+ (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(MSAR2,
+ ( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+ (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(EMSAR2,
+ ( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+ (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(MEAR1,
+ ( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+ (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(EMEAR1,
+ ( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+ (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(MEAR2,
+ ( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+ (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+ CONFIG_WRITE_WORD(EMEAR2,
+ ( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+ (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+ (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+ (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+
+ CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
+#ifdef CONFIG_SYS_DLL_MAX_DELAY
+ CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */
+#endif
+#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
+ CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
+#endif
+#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
+ CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */
+#endif /* setup & hold time */
+
+ CONFIG_WRITE_BYTE(MBER,
+ CONFIG_SYS_BANK0_ENABLE |
+ (CONFIG_SYS_BANK1_ENABLE << 1) |
+ (CONFIG_SYS_BANK2_ENABLE << 2) |
+ (CONFIG_SYS_BANK3_ENABLE << 3) |
+ (CONFIG_SYS_BANK4_ENABLE << 4) |
+ (CONFIG_SYS_BANK5_ENABLE << 5) |
+ (CONFIG_SYS_BANK6_ENABLE << 6) |
+ (CONFIG_SYS_BANK7_ENABLE << 7));
+
+#ifdef CONFIG_SYS_PGMAX
+ CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
+#endif
+
+ /* ! Wait 200us before initialize other registers */
+ /*FIXME: write a decent udelay wait */
+ __asm__ __volatile__(
+ " mtctr %0 \n \
+ 0: bdnz 0b\n"
+ :
+ : "r" (0x10000));
+
+ CONFIG_READ_WORD(MCCR1, val);
+ CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
+ __asm__ __volatile__("eieio");
+
+#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
+}
+
+
+#ifdef CONFIG_MOUSSE
+#ifdef INCLUDE_MPC107_REPORT
+struct MPC107_s {
+ unsigned int iobase;
+ char desc[120];
+} MPC107Regs[] = {
+ { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" },
+ { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" },
+ { BMC_BASE + 0x08, "MPC107 Revision" },
+ { BMC_BASE + 0x0C, "MPC107 Cache Line Size" },
+ { BMC_BASE + 0x10, "MPC107 LMBAR" },
+ { BMC_BASE + 0x14, "MPC824x PCSR" },
+ { BMC_BASE + 0xA8, "MPC824x PICR1" },
+ { BMC_BASE + 0xAC, "MPC824x PICR2" },
+ { BMC_BASE + 0x46, "MPC824x PACR" },
+ { BMC_BASE + 0x310, "MPC824x ITWR" },
+ { BMC_BASE + 0x300, "MPC824x OMBAR" },
+ { BMC_BASE + 0x308, "MPC824x OTWR" },
+ { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" },
+ { BMC_BASE + 0x78, "MPC107 EUMBAR" },
+ { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" },
+ { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" },
+ { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
+ { BMC_BASE + 0xE0, "MPC107 AMBOR Register" },
+ { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" },
+ { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" },
+ { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" },
+ { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" },
+};
+#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
+#endif /* INCLUDE_MPC107_REPORT */
+#endif /* CONFIG_MOUSSE */
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+#ifdef CONFIG_MOUSSE
+#ifdef INCLUDE_MPC107_REPORT
+ unsigned int tmp = 0, i;
+#endif
+ /*
+ * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
+ * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
+ * be accessed.
+ */
+
+#ifdef CONFIG_MPC8240 /* only on MPC8240 */
+ mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
+ /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
+ mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
+#endif
+
+
+#ifdef INCLUDE_MPC107_REPORT
+ /* Check MPC824x PCI Device and Vendor ID */
+ while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
+ printf (" MPC107: offset=0x%x, val = 0x%x\n",
+ BMC_BASE,
+ tmp);
+ }
+
+ for (i = 0; i < N_MPC107_Regs; i++) {
+ printf (" 0x%x/%s = 0x%x\n",
+ MPC107Regs[i].iobase,
+ MPC107Regs[i].desc,
+ mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
+ }
+
+ printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
+ printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
+ printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
+ printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
+ printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
+ printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
+ printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
+ printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
+ printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
+ printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
+ printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
+ printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
+ printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
+ printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
+ printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
+ printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
+#endif /* INCLUDE_MPC107_REPORT */
+#endif /* CONFIG_MOUSSE */
+ return (0);
+}
--- /dev/null
+#include "epic/epic.h"
--- /dev/null
+CONTENT:
+
+ epic.h
+ epic1.c
+ epic2.s
+
+WHAT ARE THESE FILES:
+
+These files contain MPC8240 (Kahlua) EPIC
+driver routines. The driver routines are not
+written for any specific operating system.
+They serves the purpose of code sample, and
+jump-start for using the MPC8240 EPIC unit.
+
+For the reason of correctness of C language
+syntax, these files are compiled by Metaware
+C compiler and assembler.
+
+ENDIAN NOTATION:
+
+The algorithm is designed for big-endian mode,
+software is responsible for byte swapping.
+
+USAGE:
+
+1. The host system that is running on MPC8240
+ shall link the files listed here. The memory
+ location of driver routines shall take into
+ account of that driver routines need to run
+ in supervisor mode and they process external
+ interrupts.
+
+ The routine epic_exception shall be called by
+ exception vector at location 0x500, i.e.,
+ 603e core external exception vector.
+
+2. The host system is responsible for configuring
+ the MPC8240 including Embedded Utilities Memory
+ Block. All EPIC driver functions require the
+ content of Embedded Utilities Memory Block
+ Base Address Register, EUMBBAR, as the first
+ parameter.
+
+3. Before EPIC unit of MPC8240 can be used,
+ initialize EPIC unit by calling epicInit
+ with the corresponding parameters.
+
+ The initialization shall disable the 603e
+ core External Exception by calling CoreExtIntDisable( ).
+ Next, call epicInit( ). Last, enable the 603e core
+ External Exception by calling CoreExtIntEnable( ).
+
+4. After EPIC unit has been successfully initialized,
+ epicIntSourceSet( ) shall be used to register each
+ external interrupt source. Anytime, an external
+ interrupt source can be disabled or enabled by
+ calling corresponding function, epicIntDisable( ),
+ or epicIntEnable( ).
+
+ Global Timers' resource, base count and frequency,
+ can be changed by calling epicTmFrequencySet( )
+ and epicTmBaseSet( ).
+
+ To stop counting a specific global timer, use
+ the function, epicTmInhibit while epicTmEnable
+ can be used to start counting a timer.
+
+5. To mask a set of external interrupts that are
+ are certain level below, epicIntPrioritySet( )
+ can be used. For example, if the processor's
+ current task priority register is set to 0x7,
+ only interrupts of priority 0x8 or higher will
+ be passed to the processor.
+
+ Be careful when using this function. It may
+ corrupt the current interrupt pending, selector,
+ and request registers, resulting an invalid vetor.
+
+ After enabling an interrupt, disable it may also
+ cause an invalid vector. User may consider using
+ the spurious vector interrupt service routine to
+ handle this case.
+
+6. The EPIC driver routines contains a set
+ of utilities, Set and Get, for host system
+ to query and modify the desired EPIC source
+ registers.
+
+7. Each external interrupt source shall register
+ its interrupt service routine. The routine
+ shall contain all interrupt source specific
+ processes and keep as short as possible.
+
+ Special customized end of interrupt routine
+ is optional. If it is needed, it shall contain
+ the external interrupt source specific end of
+ interrupt process.
+
+ External interrupt exception vector at 0x500
+ shall always call the epicEOI just before
+ rfi instruction. Refer to the routine,
+ epic_exception, for a code sample.
--- /dev/null
+/*********************************************************************
+ * mpc8240epic.h - EPIC module of the MPC8240 micro-controller
+ *
+ * Copyrigh 1999 Motorola Inc.
+ *
+ * Modification History:
+ * =====================
+ * 01a,04Feb99,My Created.
+ * 15Nov200, robt -modified to use in U-Boot
+ *
+*/
+
+#ifndef __INCEPICh
+#define __INCEPICh
+
+#define ULONG unsigned long
+#define MAXVEC 20
+#define MAXIRQ 5 /* IRQs */
+#define EPIC_DIRECT_IRQ 0 /* Direct interrupt type */
+
+/* EPIC register addresses */
+
+#define EPIC_EUMBBAR 0x40000 /* EUMBBAR of EPIC */
+#define EPIC_FEATURES_REG (EPIC_EUMBBAR + 0x01000)/* Feature reporting */
+#define EPIC_GLOBAL_REG (EPIC_EUMBBAR + 0x01020)/* Global config. */
+#define EPIC_INT_CONF_REG (EPIC_EUMBBAR + 0x01030)/* Interrupt config. */
+#define EPIC_VENDOR_ID_REG (EPIC_EUMBBAR + 0x01080)/* Vendor id */
+#define EPIC_PROC_INIT_REG (EPIC_EUMBBAR + 0x01090)/* Processor init. */
+#define EPIC_SPUR_VEC_REG (EPIC_EUMBBAR + 0x010e0)/* Spurious vector */
+#define EPIC_TM_FREQ_REG (EPIC_EUMBBAR + 0x010f0)/* Timer Frequency */
+
+#define EPIC_TM0_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01100)/* Gbl TM0 Cur. Count*/
+#define EPIC_TM0_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01110)/* Gbl TM0 Base Count*/
+#define EPIC_TM0_VEC_REG (EPIC_EUMBBAR + 0x01120)/* Gbl TM0 Vector Pri*/
+#define EPIC_TM0_DES_REG (EPIC_EUMBBAR + 0x01130)/* Gbl TM0 Dest. */
+
+#define EPIC_TM1_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01140)/* Gbl TM1 Cur. Count*/
+#define EPIC_TM1_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01150)/* Gbl TM1 Base Count*/
+#define EPIC_TM1_VEC_REG (EPIC_EUMBBAR + 0x01160)/* Gbl TM1 Vector Pri*/
+#define EPIC_TM1_DES_REG (EPIC_EUMBBAR + 0x01170)/* Gbl TM1 Dest. */
+
+#define EPIC_TM2_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01180)/* Gbl TM2 Cur. Count*/
+#define EPIC_TM2_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01190)/* Gbl TM2 Base Count*/
+#define EPIC_TM2_VEC_REG (EPIC_EUMBBAR + 0x011a0)/* Gbl TM2 Vector Pri*/
+#define EPIC_TM2_DES_REG (EPIC_EUMBBAR + 0x011b0)/* Gbl TM2 Dest */
+
+#define EPIC_TM3_CUR_COUNT_REG (EPIC_EUMBBAR + 0x011c0)/* Gbl TM3 Cur. Count*/
+#define EPIC_TM3_BASE_COUNT_REG (EPIC_EUMBBAR + 0x011d0)/* Gbl TM3 Base Count*/
+#define EPIC_TM3_VEC_REG (EPIC_EUMBBAR + 0x011e0)/* Gbl TM3 Vector Pri*/
+#define EPIC_TM3_DES_REG (EPIC_EUMBBAR + 0x011f0)/* Gbl TM3 Dest. */
+
+#define EPIC_EX_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Ext. Int. Sr0 Des */
+#define EPIC_EX_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Ext. Int. Sr0 Vect*/
+#define EPIC_EX_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Ext. Int. Sr1 Des */
+#define EPIC_EX_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Ext. Int. Sr1 Vect*/
+#define EPIC_EX_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Ext. Int. Sr2 Des */
+#define EPIC_EX_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Ext. Int. Sr2 Vect*/
+#define EPIC_EX_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Ext. Int. Sr3 Des */
+#define EPIC_EX_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Ext. Int. Sr3 Vect*/
+#define EPIC_EX_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Ext. Int. Sr4 Des */
+#define EPIC_EX_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Ext. Int. Sr4 Vect*/
+
+#define EPIC_SR_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Sr. Int. Sr0 Des */
+#define EPIC_SR_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Sr. Int. Sr0 Vect */
+#define EPIC_SR_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Sr. Int. Sr1 Des */
+#define EPIC_SR_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Sr. Int. Sr1 Vect.*/
+#define EPIC_SR_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Sr. Int. Sr2 Des */
+#define EPIC_SR_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Sr. Int. Sr2 Vect.*/
+#define EPIC_SR_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Sr. Int. Sr3 Des */
+#define EPIC_SR_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Sr. Int. Sr3 Vect.*/
+#define EPIC_SR_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Sr. Int. Sr4 Des */
+#define EPIC_SR_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Sr. Int. Sr4 Vect.*/
+
+#define EPIC_SR_INT5_VEC_REG (EPIC_EUMBBAR + 0x102a0)/* Sr. Int. Sr5 Des */
+#define EPIC_SR_INT5_DES_REG (EPIC_EUMBBAR + 0x102b0)/* Sr. Int. Sr5 Vect.*/
+#define EPIC_SR_INT6_VEC_REG (EPIC_EUMBBAR + 0x102c0)/* Sr. Int. Sr6 Des */
+#define EPIC_SR_INT6_DES_REG (EPIC_EUMBBAR + 0x102d0)/* Sr. Int. Sr6 Vect.*/
+#define EPIC_SR_INT7_VEC_REG (EPIC_EUMBBAR + 0x102e0)/* Sr. Int. Sr7 Des */
+#define EPIC_SR_INT7_DES_REG (EPIC_EUMBBAR + 0x102f0)/* Sr. Int. Sr7 Vect.*/
+#define EPIC_SR_INT8_VEC_REG (EPIC_EUMBBAR + 0x10300)/* Sr. Int. Sr8 Des */
+#define EPIC_SR_INT8_DES_REG (EPIC_EUMBBAR + 0x10310)/* Sr. Int. Sr8 Vect.*/
+#define EPIC_SR_INT9_VEC_REG (EPIC_EUMBBAR + 0x10320)/* Sr. Int. Sr9 Des */
+#define EPIC_SR_INT9_DES_REG (EPIC_EUMBBAR + 0x10330)/* Sr. Int. Sr9 Vect.*/
+
+#define EPIC_SR_INT10_VEC_REG (EPIC_EUMBBAR + 0x10340)/* Sr. Int. Sr10 Des */
+#define EPIC_SR_INT10_DES_REG (EPIC_EUMBBAR + 0x10350)/* Sr. Int. Sr10 Vect*/
+#define EPIC_SR_INT11_VEC_REG (EPIC_EUMBBAR + 0x10360)/* Sr. Int. Sr11 Des */
+#define EPIC_SR_INT11_DES_REG (EPIC_EUMBBAR + 0x10370)/* Sr. Int. Sr11 Vect*/
+#define EPIC_SR_INT12_VEC_REG (EPIC_EUMBBAR + 0x10380)/* Sr. Int. Sr12 Des */
+#define EPIC_SR_INT12_DES_REG (EPIC_EUMBBAR + 0x10390)/* Sr. Int. Sr12 Vect*/
+#define EPIC_SR_INT13_VEC_REG (EPIC_EUMBBAR + 0x103a0)/* Sr. Int. Sr13 Des */
+#define EPIC_SR_INT13_DES_REG (EPIC_EUMBBAR + 0x103b0)/* Sr. Int. Sr13 Vect*/
+#define EPIC_SR_INT14_VEC_REG (EPIC_EUMBBAR + 0x103c0)/* Sr. Int. Sr14 Des */
+#define EPIC_SR_INT14_DES_REG (EPIC_EUMBBAR + 0x103d0)/* Sr. Int. Sr14 Vect*/
+#define EPIC_SR_INT15_VEC_REG (EPIC_EUMBBAR + 0x103e0)/* Sr. Int. Sr15 Des */
+#define EPIC_SR_INT15_DES_REG (EPIC_EUMBBAR + 0x103f0)/* Sr. Int. Sr15 Vect*/
+
+#define EPIC_I2C_INT_VEC_REG (EPIC_EUMBBAR + 0x11020)/* I2C Int. Vect Pri.*/
+#define EPIC_I2C_INT_DES_REG (EPIC_EUMBBAR + 0x11030)/* I2C Int. Dest */
+#define EPIC_DMA0_INT_VEC_REG (EPIC_EUMBBAR + 0x11040)/* DMA0 Int. Vect Pri*/
+#define EPIC_DMA0_INT_DES_REG (EPIC_EUMBBAR + 0x11050)/* DMA0 Int. Dest */
+#define EPIC_DMA1_INT_VEC_REG (EPIC_EUMBBAR + 0x11060)/* DMA1 Int. Vect Pri*/
+#define EPIC_DMA1_INT_DES_REG (EPIC_EUMBBAR + 0x11070)/* DMA1 Int. Dest */
+#define EPIC_MSG_INT_VEC_REG (EPIC_EUMBBAR + 0x110c0)/* Msg Int. Vect Pri*/
+#define EPIC_MSG_INT_DES_REG (EPIC_EUMBBAR + 0x110d0)/* Msg Int. Dest */
+
+#define EPIC_PROC_CTASK_PRI_REG (EPIC_EUMBBAR + 0x20080)/* Proc. current task*/
+#define EPIC_PROC_INT_ACK_REG (EPIC_EUMBBAR + 0x200a0)/* Int. acknowledge */
+#define EPIC_PROC_EOI_REG (EPIC_EUMBBAR + 0x200b0)/* End of interrupt */
+
+#define EPIC_VEC_PRI_MASK 0x80000000 /* Mask Interrupt bit in IVPR */
+#define EPIC_VEC_PRI_DFLT_PRI 8 /* Interrupt Priority in IVPR */
+
+/* Error code */
+
+#define OK 0
+#define ERROR -1
+
+/* function prototypes */
+
+void epicVendorId( unsigned int *step,
+ unsigned int *devId,
+ unsigned int *venId
+ );
+void epicFeatures( unsigned int *noIRQs,
+ unsigned int *noCPUs,
+ unsigned int *VerId );
+extern void epicInit( unsigned int IRQType, unsigned int clkRatio);
+ULONG sysEUMBBARRead ( ULONG regNum );
+void sysEUMBBARWrite ( ULONG regNum, ULONG regVal);
+extern void epicTmFrequencySet( unsigned int frq );
+extern unsigned int epicTmFrequencyGet(void);
+extern unsigned int epicTmBaseSet( ULONG srcAddr,
+ unsigned int cnt,
+ unsigned int inhibit );
+extern unsigned int epicTmBaseGet ( ULONG srcAddr, unsigned int *val );
+extern unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val );
+extern unsigned int epicTmInhibit( unsigned int timer );
+extern unsigned int epicTmEnable( ULONG srcAdr );
+extern void CoreExtIntEnable(void); /* Enable 603e external interrupts */
+extern void CoreExtIntDisable(void); /* Disable 603e external interrupts */
+extern unsigned char epicIntTaskGet(void);
+extern void epicIntTaskSet( unsigned char val );
+extern unsigned int epicIntAck(void);
+extern void epicSprSet( unsigned int eumbbar, unsigned char );
+extern void epicConfigGet( unsigned int *clkRatio,
+ unsigned int *serEnable );
+extern void SrcVecTableInit(void);
+extern unsigned int epicModeGet(void);
+extern void epicIntEnable(int Vect);
+extern void epicIntDisable(int Vect);
+extern int epicIntSourceConfig(int Vect, int Polarity, int Sense, int Prio);
+extern unsigned int epicIntAck(void);
+extern void epicEOI(void);
+extern int epicCurTaskPrioSet(int Vect);
+
+struct SrcVecTable
+ {
+ ULONG srcAddr;
+ char srcName[40];
+ };
+
+#endif /* EPIC_H */
--- /dev/null
+/**************************************************
+ *
+ * copyright @ motorola, 1999
+ *
+ *************************************************/
+#include <mpc824x.h>
+#include <common.h>
+#include "epic.h"
+
+
+#define PRINT(format, args...) printf(format , ## args)
+
+typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */
+struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */
+ {
+ { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"},
+ { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"},
+ { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"},
+ { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"},
+ { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"},
+
+ { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"},
+ { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"},
+ { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"},
+ { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"},
+ { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"},
+ { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"},
+ { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"},
+ { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"},
+ { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"},
+ { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"},
+ { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"},
+
+ { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"},
+ { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"},
+ { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"},
+ { EPIC_MSG_INT_VEC_REG, "Internal Message Source"},
+ };
+
+VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */
+
+
+/****************************************************************************
+* epicInit - Initialize the EPIC registers
+*
+* This routine resets the Global Configuration Register, thus it:
+* - Disables all interrupts
+* - Sets epic registers to reset values
+* - Sets the value of the Processor Current Task Priority to the
+* highest priority (0xF).
+* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass
+* Through or 8259 compatible mode).
+*
+* If IRQType (input) is Direct IRQs:
+* - IRQType is written to the SIE bit of the EPIC Interrupt
+* Configuration register (ICR).
+* - clkRatio is ignored.
+* If IRQType is Serial IRQs:
+* - both IRQType and clkRatio will be written to the ICR register
+*/
+
+void epicInit
+ (
+ unsigned int IRQType, /* Direct or Serial */
+ unsigned int clkRatio /* Clk Ratio for Serial IRQs */
+ )
+ {
+ ULONG tmp;
+
+ tmp = sysEUMBBARRead(EPIC_GLOBAL_REG);
+ tmp |= 0xa0000000; /* Set the Global Conf. register */
+ sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp);
+ /*
+ * Wait for EPIC to reset - CLH
+ */
+ while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1);
+ sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000);
+ tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */
+
+ if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */
+ sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff);
+ else /* Serial mode */
+ {
+ tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */
+ sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp);
+ }
+
+ while (epicIntAck() != 0xff) /* Clear all pending interrupts */
+ epicEOI();
+}
+
+/****************************************************************************
+ * epicIntEnable - Enable an interrupt source
+ *
+ * This routine clears the mask bit of an external, an internal or
+ * a Timer register to enable the interrupt.
+ *
+ * RETURNS: None
+ */
+void epicIntEnable(int intVec)
+{
+ ULONG tmp;
+ ULONG srAddr;
+
+ srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */
+ tmp = sysEUMBBARRead(srAddr);
+ tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */
+ tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */
+ tmp |= intVec; /* Set Vector number */
+ sysEUMBBARWrite(srAddr, tmp);
+
+ return;
+ }
+
+/****************************************************************************
+ * epicIntDisable - Disable an interrupt source
+ *
+ * This routine sets the mask bit of an external, an internal or
+ * a Timer register to disable the interrupt.
+ *
+ * RETURNS: OK or ERROR
+ *
+ */
+
+void epicIntDisable
+ (
+ int intVec /* Interrupt vector number */
+ )
+ {
+
+ ULONG tmp, srAddr;
+
+ srAddr = SrcVecTable[intVec].srcAddr;
+ tmp = sysEUMBBARRead(srAddr);
+ tmp |= 0x80000000; /* Set the mask bit */
+ sysEUMBBARWrite(srAddr, tmp);
+ return;
+ }
+
+/****************************************************************************
+ * epicIntSourceConfig - Set properties of an interrupt source
+ *
+ * This function sets interrupt properites (Polarity, Sense, Interrupt
+ * Prority, and Interrupt Vector) of an Interrupt Source. The properties
+ * can be set when the current source is not in-request or in-service,
+ * which is determined by the Activity bit. This routine return ERROR
+ * if the the Activity bit is 1 (in-request or in-service).
+ *
+ * This function assumes that the Source Vector/Priority register (input)
+ * is a valid address.
+ *
+ * RETURNS: OK or ERROR
+ */
+
+int epicIntSourceConfig
+ (
+ int Vect, /* interrupt source vector number */
+ int Polarity, /* interrupt source polarity */
+ int Sense, /* interrupt source Sense */
+ int Prio /* interrupt source priority */
+ )
+
+ {
+ ULONG tmp, newVal;
+ ULONG actBit, srAddr;
+
+ srAddr = SrcVecTable[Vect].srcAddr;
+ tmp = sysEUMBBARRead(srAddr);
+ actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */
+ if (actBit == 1)
+ return ERROR;
+
+ tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */
+ newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect;
+ sysEUMBBARWrite(srAddr, tmp | newVal );
+ return (OK);
+ }
+
+/****************************************************************************
+ * epicIntAck - acknowledge an interrupt
+ *
+ * This function reads the Interrupt acknowldge register and return
+ * the vector number of the highest pending interrupt.
+ *
+ * RETURNS: Interrupt Vector number.
+ */
+
+unsigned int epicIntAck(void)
+{
+ return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG ));
+}
+
+/****************************************************************************
+ * epicEOI - signal an end of interrupt
+ *
+ * This function writes 0x0 to the EOI register to signal end of interrupt.
+ * It is usually called after an interrupt routine is served.
+ *
+ * RETURNS: None
+ */
+
+void epicEOI(void)
+ {
+ sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0);
+ }
+
+/****************************************************************************
+ * epicCurTaskPrioSet - sets the priority of the Processor Current Task
+ *
+ * This function should be called after epicInit() to lower the priority
+ * of the processor current task.
+ *
+ * RETURNS: OK or ERROR
+ */
+
+int epicCurTaskPrioSet
+ (
+ int prioNum /* New priority value */
+ )
+ {
+
+ if ( (prioNum < 0) || (prioNum > 0xF))
+ return ERROR;
+ sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum);
+ return OK;
+ }
+
+
+/************************************************************************
+ * function: epicIntTaskGet
+ *
+ * description: Get value of processor current interrupt task priority register
+ *
+ * note:
+ ***********************************************************************/
+unsigned char epicIntTaskGet()
+{
+ /* get the interrupt task priority register */
+ ULONG reg;
+ unsigned char rec;
+
+ reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG );
+ rec = ( reg & 0x0F );
+ return rec;
+}
+
+
+/**************************************************************
+ * function: epicISR
+ *
+ * description: EPIC service routine called by the core exception
+ * at 0x500
+ *
+ * note:
+ **************************************************************/
+unsigned int epicISR(void)
+{
+ return 0;
+}
+
+
+/************************************************************
+ * function: epicModeGet
+ *
+ * description: query EPIC mode, return 0 if pass through mode
+ * return 1 if mixed mode
+ *
+ * note:
+ *************************************************************/
+unsigned int epicModeGet(void)
+{
+ ULONG val;
+
+ val = sysEUMBBARRead( EPIC_GLOBAL_REG );
+ return (( val & 0x20000000 ) >> 29);
+}
+
+
+/*********************************************
+ * function: epicConfigGet
+ *
+ * description: Get the EPIC interrupt Configuration
+ * return 0 if not error, otherwise return 1
+ *
+ * note:
+ ********************************************/
+void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable)
+{
+ ULONG val;
+
+ val = sysEUMBBARRead( EPIC_INT_CONF_REG );
+ *clkRatio = ( val & 0x70000000 ) >> 28;
+ *serEnable = ( val & 0x8000000 ) >> 27;
+}
+
+
+/*******************************************************************
+ * sysEUMBBARRead - Read a 32-bit EUMBBAR register
+ *
+ * This routine reads the content of a register in the Embedded
+ * Utilities Memory Block, and swaps to big endian before returning
+ * the value.
+ *
+ * RETURNS: The content of the specified EUMBBAR register.
+ */
+
+ULONG sysEUMBBARRead
+ (
+ ULONG regNum
+ )
+ {
+ ULONG temp;
+
+ temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
+ return ( LONGSWAP(temp));
+ }
+
+/*******************************************************************
+ * sysEUMBBARWrite - Write a 32-bit EUMBBAR register
+ *
+ * This routine swaps the value to little endian then writes it to
+ * a register in the Embedded Utilities Memory Block address space.
+ *
+ * RETURNS: N/A
+ */
+
+void sysEUMBBARWrite
+ (
+ ULONG regNum, /* EUMBBAR register address */
+ ULONG regVal /* Value to be written */
+ )
+ {
+
+ *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
+ return ;
+ }
+
+
+/********************************************************
+ * function: epicVendorId
+ *
+ * description: return the EPIC Vendor Identification
+ * register:
+ *
+ * siliccon version, device id, and vendor id
+ *
+ * note:
+ ********************************************************/
+void epicVendorId
+ (
+ unsigned int *step,
+ unsigned int *devId,
+ unsigned int *venId
+ )
+ {
+ ULONG val;
+ val = sysEUMBBARRead( EPIC_VENDOR_ID_REG );
+ *step = ( val & 0x00FF0000 ) >> 16;
+ *devId = ( val & 0x0000FF00 ) >> 8;
+ *venId = ( val & 0x000000FF );
+ }
+
+/**************************************************
+ * function: epicFeatures
+ *
+ * description: return the number of IRQ supported,
+ * number of CPU, and the version of the
+ * OpenEPIC
+ *
+ * note:
+ *************************************************/
+void epicFeatures
+ (
+ unsigned int *noIRQs,
+ unsigned int *noCPUs,
+ unsigned int *verId
+ )
+ {
+ ULONG val;
+
+ val = sysEUMBBARRead( EPIC_FEATURES_REG );
+ *noIRQs = ( val & 0x07FF0000 ) >> 16;
+ *noCPUs = ( val & 0x00001F00 ) >> 8;
+ *verId = ( val & 0x000000FF );
+}
+
+
+/*********************************************************
+ * function: epciTmFrequncySet
+ *
+ * description: Set the timer frequency reporting register
+ ********************************************************/
+void epicTmFrequencySet( unsigned int frq )
+{
+ sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq);
+}
+
+/*******************************************************
+ * function: epicTmFrequncyGet
+ *
+ * description: Get the current value of the Timer Frequency
+ * Reporting register
+ *
+ ******************************************************/
+unsigned int epicTmFrequencyGet(void)
+{
+ return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ;
+}
+
+
+/****************************************************
+ * function: epicTmBaseSet
+ *
+ * description: Set the #n global timer base count register
+ * return 0 if no error, otherwise return 1.
+ *
+ * note:
+ ****************************************************/
+unsigned int epicTmBaseSet
+ (
+ ULONG srcAddr, /* Address of the Timer Base register */
+ unsigned int cnt, /* Base count */
+ unsigned int inhibit /* 1 - count inhibit */
+ )
+{
+
+ unsigned int val = 0x80000000;
+ /* First inhibit counting the timer */
+ sysEUMBBARWrite(srcAddr, val) ;
+
+ /* set the new value */
+ val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31);
+ sysEUMBBARWrite(srcAddr, val) ;
+ return 0;
+}
+
+/***********************************************************************
+ * function: epicTmBaseGet
+ *
+ * description: Get the current value of the global timer base count register
+ * return 0 if no error, otherwise return 1.
+ *
+ * note:
+ ***********************************************************************/
+unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val )
+{
+ *val = sysEUMBBARRead( srcAddr );
+ *val = *val & 0x7fffffff;
+ return 0;
+}
+
+/***********************************************************
+ * function: epicTmCountGet
+ *
+ * description: Get the value of a given global timer
+ * current count register
+ * return 0 if no error, otherwise return 1
+ * note:
+ **********************************************************/
+unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val )
+{
+ *val = sysEUMBBARRead( srcAddr );
+ *val = *val & 0x7fffffff;
+ return 0;
+}
+
+
+/***********************************************************
+ * function: epicTmInhibit
+ *
+ * description: Stop counting of a given global timer
+ * return 0 if no error, otherwise return 1
+ *
+ * note:
+ ***********************************************************/
+unsigned int epicTmInhibit( unsigned int srcAddr )
+{
+ ULONG val;
+
+ val = sysEUMBBARRead( srcAddr );
+ val |= 0x80000000;
+ sysEUMBBARWrite( srcAddr, val );
+ return 0;
+}
+
+/******************************************************************
+ * function: epicTmEnable
+ *
+ * description: Enable counting of a given global timer
+ * return 0 if no error, otherwise return 1
+ *
+ * note:
+ *****************************************************************/
+unsigned int epicTmEnable( ULONG srcAddr )
+{
+ ULONG val;
+
+ val = sysEUMBBARRead( srcAddr );
+ val &= 0x7fffffff;
+ sysEUMBBARWrite( srcAddr, val );
+ return 0;
+}
+
+void epicSourcePrint(int Vect)
+ {
+ ULONG srcVal;
+
+ srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr);
+ PRINT("%s\n", SrcVecTable[Vect].srcName);
+ PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr);
+ PRINT("Vector = %ld\n", (srcVal & 0x000000FF) );
+ PRINT("Mask = %ld\n", srcVal >> 31);
+ PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30);
+ PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23);
+ PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22);
+ PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16);
+ }
--- /dev/null
+/**************************************
+ *
+ * copyright @ Motorola, 1999
+ *
+ **************************************/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+
+/*********************************************
+ * function: CoreExtIntEnable
+ *
+ * description: Enable 603e core external interrupt
+ *
+ * note: mtmsr is context-synchronization
+ **********************************************/
+ .text
+ .align 2
+ .global CoreExtIntEnable
+CoreExtIntEnable:
+ mfmsr r3
+
+ ori r3,r3,0x8000 /* enable external interrupt */
+ mtmsr r3
+
+ bclr 20, 0
+
+/*******************************************
+ * function: CoreExtIntDisable
+ *
+ * description: Disable 603e core external interrupt
+ *
+ * note:
+ *******************************************/
+ .text
+ .align 2
+ .global CoreExtIntDisable
+CoreExtIntDisable:
+ mfmsr r4
+
+ xor r3,r3,r3
+ or r3,r3,r4
+
+ andis. r4,r4,0xffff
+ andi. r3,r3,0x7fff /* disable external interrupt */
+
+ or r3,r3,r4
+ mtmsr r3
+
+ bclr 20, 0
+
+/*********************************************************
+ * function: epicEOI
+ *
+ * description: signal the EOI and restore machine status
+ * Input: r3 - value of eumbbar
+ * Output: r3 - value of eumbbar
+ * r4 - ISR vector value
+ * note:
+ ********************************************************/
+ .text
+ .align 2
+ .global epicEOI
+epicEOI:
+ lis r5,0x0006 /* Build End Of Interrupt Register offset */
+ ori r5,r5,0x00b0
+ xor r7,r7,r7 /* Clear r7 */
+ stwbrx r7,r5,r3 /* Save r7, writing to this register will
+ * intidate the end of processing the
+ * highest interrupt.
+ */
+ sync
+
+ /* ---RESTORE MACHINE STATE */
+ mfmsr r13 /* Clear Recoverable Interrupt bit in MSR */
+ or r7,r7,r13
+
+ andis. r7,r7,0xffff
+ andi. r13,r13,0x7ffd /* (and disable interrupts) */
+ or r13,r13,r7
+ mtmsr r13
+
+ lwz r13,0x1c(r1) /* pull ctr */
+ mtctr r13
+
+ lwz r13,0x18(r1) /* pull xer */
+ mtctr r13
+
+ lwz r13,0x14(r1) /* pull lr */
+ mtctr r13
+
+ lwz r13,0x10(r1) /* Pull SRR1 from stack */
+ mtspr SRR1,r13 /* Restore SRR1 */
+
+ lwz r13,0xc(r1) /* Pull SRR0 from stack */
+ mtspr SRR0,r13 /* Restore SRR0 */
+
+ lwz r13,0x8(r1) /* Pull User stack pointer from stack */
+ mtspr SPRG1,r13 /* Restore SPRG1 */
+
+ lwz r4,0x4(r1) /* vector value */
+ lwz r3,0x0(r1) /* eumbbar */
+ sync
+
+ addi r1,r1,0x20 /* Deallocate stack */
+ mtspr SPRG0,r1 /* Save updated Supervisor stack pointer */
+ mfspr r1,SPRG1 /* Restore User stack pointer */
+
+ bclr 20,0
+
+/***********************************************************
+ * function: exception routine called by exception vector
+ * at 0x500, external interrupt
+ *
+ * description: Kahlua EPIC controller
+ *
+ * input: r3 - content of eumbbar
+ * output: r3 - ISR return value
+ * r4 - Interrupt vector number
+ * note:
+ ***********************************************************/
+
+ .text
+ .align 2
+ .global epic_exception
+
+epic_exception:
+
+ /*---SAVE MACHINE STATE TO A STACK */
+ mtspr SPRG1,r1 /* Save User stack pointer to SPRG1 */
+ mfspr r1,SPRG0 /* Load Supervisor stack pointer into r1 */
+
+ stwu r3,-0x20(r1) /* Push the value of eumbbar onto stack */
+
+ mfspr r3,SPRG1 /* Push User stack pointer onto stack */
+ stw r3,0x8(r1)
+ mfspr r3,SRR0 /* Push SRR0 onto stack */
+ stw r1,0xc(r1)
+ mfspr r3,SRR1 /* Push SRR1 onto stack */
+ stw r3,0x10(r1)
+ mflr r3
+ stw r3,0x14(r1) /* Push LR */
+ mfxer r3
+ stw r3,0x18(r1) /* Push Xer */
+ mfctr r3
+ stw r3,0x1c(r1) /* Push CTR */
+
+ mtspr SPRG0,r1 /* Save updated Supervisor stack pointer
+ * value to SPRG0
+ */
+ mfmsr r3
+ ori r3,r3,0x0002 /* Set Recoverable Interrupt bit in MSR */
+ mtmsr r3
+
+ /* ---READ IN THE EUMBAR REGISTER */
+ lwz r6,0(r1) /* this is eumbbar */
+ sync
+
+ /* ---READ EPIC REGISTER: PROCESSOR INTERRUPT ACKNOWLEDGE REGISTER */
+ lis r5,0x0006 /* Build Interrupt Acknowledge Register
+ * offset
+ */
+ ori r5,r5,0x00a0
+ lwbrx r7,r5,r6 /* Load interrupt vector into r7 */
+ sync
+
+ /* --MASK OFF ALL BITS EXCEPT THE VECTOR */
+ xor r3,r3,r3
+ xor r4,r4,r4
+ or r3, r3, r6 /* eumbbar in r3 */
+ andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
+
+ stw r4,0x04(r1) /* save the vector value */
+
+ lis r5,epicISR@ha
+ ori r5,r5,epicISR@l
+ mtlr r5
+ blrl
+
+ xor r30,r30,r30
+ or r30,r30,r3 /* save the r3 which containts the return value from epicISR */
+
+ /* ---READ IN THE EUMBAR REGISTER */
+ lwz r3,0(r1)
+ sync
+
+ lis r5,epicEOI@ha
+ ori r5,r5,epicEOI@l
+ mtlr r5
+ blrl
+
+ xor r3,r3,r3
+ or r3,r3,r30 /* restore the ISR return value */
+
+ bclr 20,0
--- /dev/null
+/**************************************
+ *
+ * copyright @ Motorola, 1999
+ *
+ *
+ * This file contains two commonly used
+ * lower level utility routines.
+ *
+ * The utility routines are also in other
+ * Kahlua device driver libraries. The
+ * need to be linked in only once.
+ **************************************/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+/**********************************************************
+ * function: load_runtime_reg
+ *
+ * input: r3 - value of eumbbar
+ * r4 - register offset in embedded utility space
+ *
+ * output: r3 - register content
+ **********************************************************/
+ .text
+ .align 2
+ .global load_runtime_reg
+
+load_runtime_reg:
+
+ xor r5,r5,r5
+ or r5,r5,r3 /* save eumbbar */
+
+ lwbrx r3,r4,r5
+ sync
+
+ bclr 20, 0
+
+/****************************************************************
+ * function: store_runtime_reg
+ *
+ * input: r3 - value of eumbbar
+ * r4 - register offset in embedded utility space
+ * r5 - new value to be stored
+ *
+ ****************************************************************/
+ .text
+ .align 2
+ .global store_runtime_reg
+store_runtime_reg:
+
+ xor r0,r0,r0
+
+ stwbrx r5, r4, r3
+ sync
+
+ bclr 20,0
--- /dev/null
+/* Copyright Motorola, Inc. 1993, 1994
+ ALL RIGHTS RESERVED
+
+ You are hereby granted a copyright license to use, modify, and
+ distribute the SOFTWARE so long as this entire notice is retained
+ without alteration in any modified and/or redistributed versions,
+ and that such modified versions are clearly identified as such.
+ No licenses are granted by implication, estoppel or otherwise under
+ any patents or trademarks of Motorola, Inc.
+
+ The SOFTWARE is provided on an "AS IS" basis and without warranty.
+ To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
+ ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
+ WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
+ PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
+ REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
+ THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
+
+ To the maximum extent permitted by applicable law, IN NO EVENT SHALL
+ MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
+ (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
+ BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
+ INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
+ INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility
+ for the maintenance and support of the SOFTWARE.
+
+*/
+
+
+#include "config.h"
+
+/*
+ 1 2 3 4 5 6 7 8
+01234567890123456789012345678901234567890123456789012345678901234567890123456789
+*/
+/* List define statements here */
+
+/* These are for all the toolboxes and functions to use. These will help
+to standardize the error handling in the current project */
+
+ /* this is the "data type" for the error
+ messages in the system */
+#define STATUS unsigned int
+
+ /* this is a success status code */
+#define SUCCESS 1
+
+ /* likewise this is failure */
+#define FAILURE 0
+
+#define NUM_ERRORS 47
+
+/* This first section of "defines" are for error codes ONLY. The called
+ routine will return one of these error codes to the caller. If the final
+ returned code is "VALID", then everything is a-okay. However, if one
+ of the functions returns a non-valid status, that error code should be
+ propogated back to all the callers. At the end, the last caller will
+ call an error_processing function, and send in the status which was
+ returned. It's up to the error_processing function to determine which
+ error occured (as indicated by the status), and print an appropriate
+ message back to the user.
+*/
+/*----------------------------------------------------------------------*/
+/* these are specifically for the parser routines */
+
+#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
+#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
+#define ILLEGAL_RD_STAGE 0xfb02 /* cannot specify reg. family in range*/
+#define ILLEGAL_REG_FAMILY 0xfb03 /* "cannot specify a range of special
+ or miscellaneous registers"*/
+#define RANGE_CROSS_FAMILY 0xfb04 /* "cannot specify a range across
+ register families" */
+#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
+#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
+#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
+#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
+#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
+#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
+
+
+/*----------------------------------------------------------------------*/
+/* these are for the error checking toolbox */
+
+#define INVALID 0xfd00 /* NOT valid */
+#define VALID 0xfd01 /* valid */
+
+ /* This error is found in the fcn:
+ is_right_size_input() to indicate
+ that the input was not 8 characters
+ long. */
+#define INVALID_SIZE 0xfd02
+
+ /* This error is found in the fcn:
+ is_valid_address_range() to indicate
+ that the address given falls outside
+ of valid memory defined by MEM_START
+ to MEM_END.
+ */
+#define OUT_OF_BOUNDS_ADDRESS 0xfd03
+
+ /* This error is found in the fcn:
+ is_valid_hex_input() to indicate that
+ one of more of the characters entered
+ are not valid hex characters. Valid
+ hex characters are 0-9, A-F, a-f.
+ */
+#define INVALID_HEX_INPUT 0xfd04
+
+ /* This error is found in the fcn:
+ is_valid_register_number() to indicate
+ that a given register does not exist.
+ */
+#define REG_NOT_READABLE 0xfd05
+
+ /* This error is found in the fcn:
+ is_word_aligned_address() to indicate
+ that the given address is not word-
+ aligned. A word-aligned address ends
+ in 0x0,0x4,0x8,0xc.
+ */
+#define NOT_WORD_ALIGNED 0xfd07
+
+ /* This error is found in the fcn:
+ is_valid_address_range() to indicate
+ that the starting address is greater
+ than the ending address.
+ */
+#define REVERSED_ADDRESS 0xfd08
+
+ /* this error tells us that the address
+ specified as the destination is within
+ the source addresses */
+#define RANGE_OVERLAP 0xfd09
+
+
+#define ERROR 0xfd0a /* An error occured */
+#define INVALID_PARAM 0xfd0b /* "invalid input parameter " */
+
+
+#define INVALID_FLAG 0xfd0c /* invalid flag */
+
+/*----------------------------------------------------------------------*/
+/* these are for the getarg toolbox */
+
+#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
+#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
+
+
+/*----------------------------------------------------------------------*/
+/* these are for the tokenizer toolbox */
+
+#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
+#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
+#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
+#define INVALID_STRING 0xFF03 /* unable to extract string from input */
+#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
+#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
+#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
+#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
+#define NO_OPEN_IBS 0xFF08 /* "no open input buffers" */
+
+
+/* these are for the read from screen toolbox */
+
+#define RESERVED_WORD 0xFC00 /* used a reserved word as an arguement*/
+
+
+/* these are for the breakpoint routines */
+
+#define FULL_BPDS 0xFA00 /* breakpoint data structure is full */
+
+
+/* THESE are for the downloader */
+
+#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
+#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
+#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
+#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
+
+
+/* these are for the compression and decompression stuff */
+
+#define COMP_UNK_CHARACTER 0xf800 /* "unknown compressed character " */
+
+#define COMP_UNKNOWN_STATE 0xf801 /* "unknown binary state" */
+
+#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
+
+
+/* these are for the DUART handling things */
+
+ /* "unrecognized serial port configuration" */
+#define UNKNOWN_PORT_STATE 0xf700
+
+
+/* these are for the register toolbox */
+
+ /* "cannot find register in special
+ purpose register file " */
+#define SPR_NOT_FOUND 0xf600
+
+
+/* these are for the duart specific stuff */
+
+ /* "transparent mode needs access to
+ two serial ports" */
+#define TM_NEEDS_BOTH_PORTS 0xf500
+
+
+/*----------------------------------------------------------------------*/
+/* these are specifically for the flash routines */
+#define FLASH_ERROR 0xf100 /* general flash error */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gleb Natapov <gnatapov@mrv.com>
+ * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
+ *
+ * Hardware I2C driver for MPC107 PCI bridge.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#undef I2CDBG
+
+#ifdef CONFIG_HARD_I2C
+#include <i2c.h>
+
+#define TIMEOUT (CONFIG_SYS_HZ/4)
+
+#define I2C_Addr ((unsigned *)(CONFIG_SYS_EUMB_ADDR + 0x3000))
+
+#define I2CADR &I2C_Addr[0]
+#define I2CFDR &I2C_Addr[1]
+#define I2CCCR &I2C_Addr[2]
+#define I2CCSR &I2C_Addr[3]
+#define I2CCDR &I2C_Addr[4]
+
+#define MPC107_CCR_MEN 0x80
+#define MPC107_CCR_MIEN 0x40
+#define MPC107_CCR_MSTA 0x20
+#define MPC107_CCR_MTX 0x10
+#define MPC107_CCR_TXAK 0x08
+#define MPC107_CCR_RSTA 0x04
+
+#define MPC107_CSR_MCF 0x80
+#define MPC107_CSR_MAAS 0x40
+#define MPC107_CSR_MBB 0x20
+#define MPC107_CSR_MAL 0x10
+#define MPC107_CSR_SRW 0x04
+#define MPC107_CSR_MIF 0x02
+#define MPC107_CSR_RXAK 0x01
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+/* taken from linux include/asm-ppc/io.h */
+inline unsigned in_le32 (volatile unsigned *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__ ("lwbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync":"=r" (ret): "r" (addr), "m" (*addr));
+ return ret;
+}
+
+inline void out_le32 (volatile unsigned *addr, int val)
+{
+ __asm__ __volatile__ ("stwbrx %1,0,%2; eieio":"=m" (*addr):"r" (val),
+ "r" (addr));
+}
+
+#define writel(val, addr) out_le32(addr, val)
+#define readl(addr) in_le32(addr)
+
+void i2c_init (int speed, int slaveadd)
+{
+ /* stop I2C controller */
+ writel (0x0, I2CCCR);
+ /* set clock */
+ writel (0x1020, I2CFDR);
+ /* write slave address */
+ writel (slaveadd, I2CADR);
+ /* clear status register */
+ writel (0x0, I2CCSR);
+ /* start I2C controller */
+ writel (MPC107_CCR_MEN, I2CCCR);
+
+ return;
+}
+
+static __inline__ int i2c_wait4bus (void)
+{
+ ulong timeval = get_timer (0);
+
+ while (readl (I2CCSR) & MPC107_CSR_MBB)
+ if (get_timer (timeval) > TIMEOUT)
+ return -1;
+
+ return 0;
+}
+
+static __inline__ int i2c_wait (int write)
+{
+ u32 csr;
+ ulong timeval = get_timer (0);
+
+ do {
+ csr = readl (I2CCSR);
+
+ if (!(csr & MPC107_CSR_MIF))
+ continue;
+
+ writel (0x0, I2CCSR);
+
+ if (csr & MPC107_CSR_MAL) {
+#ifdef I2CDBG
+ printf ("i2c_wait: MAL\n");
+#endif
+ return -1;
+ }
+
+ if (!(csr & MPC107_CSR_MCF)) {
+#ifdef I2CDBG
+ printf ("i2c_wait: unfinished\n");
+#endif
+ return -1;
+ }
+
+ if (write == I2C_WRITE && (csr & MPC107_CSR_RXAK)) {
+#ifdef I2CDBG
+ printf ("i2c_wait: No RXACK\n");
+#endif
+ return -1;
+ }
+
+ return 0;
+ } while (get_timer (timeval) < TIMEOUT);
+
+#ifdef I2CDBG
+ printf ("i2c_wait: timed out\n");
+#endif
+ return -1;
+}
+
+static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+ writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX |
+ (rsta ? MPC107_CCR_RSTA : 0), I2CCCR);
+
+ writel ((dev << 1) | dir, I2CCDR);
+
+ if (i2c_wait (I2C_WRITE) < 0)
+ return 0;
+
+ return 1;
+}
+
+static __inline__ int __i2c_write (u8 * data, int length)
+{
+ int i;
+
+ writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX, I2CCCR);
+
+ for (i = 0; i < length; i++) {
+ writel (data[i], I2CCDR);
+
+ if (i2c_wait (I2C_WRITE) < 0)
+ break;
+ }
+
+ return i;
+}
+
+static __inline__ int __i2c_read (u8 * data, int length)
+{
+ int i;
+
+ writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
+ ((length == 1) ? MPC107_CCR_TXAK : 0), I2CCCR);
+
+ /* dummy read */
+ readl (I2CCDR);
+
+ for (i = 0; i < length; i++) {
+ if (i2c_wait (I2C_READ) < 0)
+ break;
+
+ /* Generate ack on last next to last byte */
+ if (i == length - 2)
+ writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
+ MPC107_CCR_TXAK, I2CCCR);
+
+ /* Generate stop on last byte */
+ if (i == length - 1)
+ writel (MPC107_CCR_MEN | MPC107_CCR_TXAK, I2CCCR);
+
+ data[i] = readl (I2CCDR);
+ }
+
+ return i;
+}
+
+int i2c_read (u8 dev, uint addr, int alen, u8 * data, int length)
+{
+ int i = 0;
+ u8 *a = (u8 *) & addr;
+
+ if (i2c_wait4bus () < 0)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write (&a[4 - alen], alen) != alen)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_READ, 1) == 0)
+ goto exit;
+
+ i = __i2c_read (data, length);
+
+exit:
+ writel (MPC107_CCR_MEN, I2CCCR);
+
+ return !(i == length);
+}
+
+int i2c_write (u8 dev, uint addr, int alen, u8 * data, int length)
+{
+ int i = 0;
+ u8 *a = (u8 *) & addr;
+
+ if (i2c_wait4bus () < 0)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write (&a[4 - alen], alen) != alen)
+ goto exit;
+
+ i = __i2c_write (data, length);
+
+exit:
+ writel (MPC107_CCR_MEN, I2CCCR);
+
+ return !(i == length);
+}
+
+int i2c_probe (uchar chip)
+{
+ int tmp;
+
+ /*
+ * Try to read the first location of the chip. The underlying
+ * driver doesn't appear to support sending just the chip address
+ * and looking for an <ACK> back.
+ */
+ udelay (10000);
+ return i2c_read (chip, 0, 1, (uchar *) &tmp, 1);
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+#ifndef I2C_EXPORT_H
+#define I2C_EXPORT_H
+
+/****************************************************
+ *
+ * Copyright Motrola 1999
+ *
+ ****************************************************/
+
+/* These are the defined return values for the I2C_do_transaction function.
+ * Any non-zero value indicates failure. Failure modes can be added for
+ * more detailed error reporting.
+ */
+typedef enum _i2c_status
+{
+ I2C_SUCCESS = 0,
+ I2C_ERROR,
+} I2C_Status;
+
+/* These are the defined tasks for I2C_do_transaction.
+ * Modes for SLAVE_RCV and SLAVE_XMIT will be added.
+ */
+typedef enum _i2c_transaction_mode
+{
+ I2C_MASTER_RCV = 0,
+ I2C_MASTER_XMIT = 1,
+} I2C_TRANSACTION_MODE;
+
+typedef enum _i2c_interrupt_mode
+{
+ I2C_INT_DISABLE = 0,
+ I2C_INT_ENABLE = 1,
+} I2C_INTERRUPT_MODE;
+
+typedef enum _i2c_stop
+{
+ I2C_NO_STOP = 0,
+ I2C_STOP = 1,
+} I2C_STOP_MODE;
+
+typedef enum _i2c_restart
+{
+ I2C_NO_RESTART = 0,
+ I2C_RESTART = 1,
+} I2C_RESTART_MODE;
+
+/******************** App. API ********************
+ * The application API is for user level application
+ * to use the functionality provided by I2C driver.
+ * This is a "generic" I2C interface, it should contain
+ * nothing specific to the Kahlua implementation.
+ * Only the generic functions are exported by the library.
+ *
+ * Note: Its App.s responsibility to swap the data
+ * byte. In our API, we just transfer whatever
+ * we are given
+ **************************************************/
+
+
+/* Initialize I2C unit with the following:
+ * driver's slave address
+ * interrupt enabled
+ * optional pointer to application layer print function
+ *
+ * These parameters may be added:
+ * desired clock rate
+ * digital filter frequency sampling rate
+ *
+ * This function must be called before I2C unit can be used.
+ */
+extern I2C_Status I2C_Initialize(
+ unsigned char addr, /* driver's I2C slave address */
+ I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt
+ * 0 - disable I2C interrupt
+ */
+ int (*app_print_function)(char *,...)); /* pointer to optional "printf"
+ * provided by application
+ */
+
+/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV
+ * are implemented. Both are only in polling mode.
+ *
+ * en_int controls interrupt/polling mode
+ * act is the type of transaction
+ * addr is the I2C address of the slave device
+ * len is the length of data to send or receive
+ * buffer is the address of the data buffer
+ * stop = I2C_NO_STOP, don't signal STOP at end of transaction
+ * I2C_STOP, signal STOP at end of transaction
+ * retry is the timeout retry value, currently ignored
+ * rsta = I2C_NO_RESTART, this is not continuation of existing transaction
+ * I2C_RESTART, this is a continuation of existing transaction
+ */
+extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int,
+ I2C_TRANSACTION_MODE act,
+ unsigned char i2c_addr,
+ unsigned char data_addr,
+ int len,
+ char *buffer,
+ I2C_STOP_MODE stop,
+ int retry,
+ I2C_RESTART_MODE rsta);
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <asm/pci_io.h>
+#include <commproc.h>
+#include "drivers/epic.h"
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ *decrementer_count = (get_bus_freq (0) / 4) / CONFIG_SYS_HZ;
+
+ /*
+ * It's all broken at the moment and I currently don't need
+ * interrupts. If you want to fix it, have a look at the epic
+ * drivers in dink32 v12. They do everthing and Motorola said
+ * I could use the dink source in this project as long as
+ * copyright notices remain intact.
+ */
+
+ epicInit (EPIC_DIRECT_IRQ, 0);
+ /* EPIC won't generate INT unless Current Task Pri < 15 */
+ epicCurTaskPrioSet(0);
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+ register unsigned long temp;
+
+ pci_readl (CONFIG_SYS_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
+ sync (); /* i'm not convinced this is needed, but dink source has it */
+ temp &= 0xff; /*get vector */
+
+ /*TODO: handle them -... */
+ epicEOI ();
+}
+
+/****************************************************************************/
+
+/*
+ * blank int handlers.
+ */
+
+void
+irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
+{
+}
+
+void irq_free_handler (int vec)
+{
+
+}
+
+/*TODO: some handlers for winbond and 87308 interrupts
+ and what about generic pci inteerupts?
+ vga?
+ */
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
--- /dev/null
+/*
+ * arch/powerpc/kernel/mpc10x_common.c
+ *
+ * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
+ * Mem ctlr, EPIC, etc.
+ *
+ * Author: Mark A. Greer
+ * mgreer@mvista.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <mpc824x.h>
+
+void pci_mpc824x_init (struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System memory space */
+ pci_set_region(hose->regions + 0,
+ CHRP_PCI_MEMORY_BUS,
+ CHRP_PCI_MEMORY_PHYS,
+ CHRP_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CHRP_PCI_MEM_BUS,
+ CHRP_PCI_MEM_PHYS,
+ CHRP_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* ISA/PCI memory space */
+ pci_set_region(hose->regions + 2,
+ CHRP_ISA_MEM_BUS,
+ CHRP_ISA_MEM_PHYS,
+ CHRP_ISA_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + 3,
+ CHRP_PCI_IO_BUS,
+ CHRP_PCI_IO_PHYS,
+ CHRP_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* ISA/PCI I/O space */
+ pci_set_region(hose->regions + 4,
+ CHRP_ISA_IO_BUS,
+ CHRP_ISA_IO_PHYS,
+ CHRP_ISA_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 5;
+
+ pci_setup_indirect(hose,
+ CHRP_REG_ADDR,
+ CHRP_REG_DATA);
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Gregory E. Allen, gallen@arlut.utexas.edu
+ * Applied Research Laboratories, The University of Texas at Austin
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency on
+ * PCI_SYNC_IN .
+ *
+ * CONFIG_PLL_PCI_TO_MEM_MULTIPLIER is only required on MPC8240
+ * boards. It should be defined as the PCI to Memory Multiplier as
+ * documented in the MPC8240 Hardware Specs.
+ *
+ * Other mpc824x boards don't need CONFIG_PLL_PCI_TO_MEM_MULTIPLIER
+ * because they can determine it from the PCR.
+ *
+ * Gary Milliorn <gary.milliorn@motorola.com> (who should know since
+ * he designed the Sandpoint) told us that the PCR is not in all revs
+ * of the MPC8240 CPU, so it's not guaranteeable and we cannot do
+ * away with CONFIG_PLL_PCI_TO_MEM_MULTIPLIER altogether.
+ */
+/* ------------------------------------------------------------------------- */
+
+/* This gives the PCI to Memory multiplier times 10 */
+/* The index is the value of PLL_CFG[0:4] */
+/* This is documented in the MPC8240/5 Hardware Specs */
+
+short pll_pci_to_mem_multiplier[] = {
+#if defined(CONFIG_MPC8240)
+ 30, 30, 10, 10, 20, 10, 0, 10,
+ 10, 0, 20, 0, 20, 0, 20, 0,
+ 30, 0, 15, 0, 20, 0, 20, 0,
+ 25, 0, 10, 0, 15, 15, 0, 0,
+#elif defined(CONFIG_MPC8245)
+ 30, 30, 10, 10, 20, 10, 10, 10,
+ 10, 20, 20, 15, 20, 15, 20, 30,
+ 30, 40, 15, 40, 20, 25, 20, 40,
+ 25, 20, 10, 20, 15, 15, 15, 0,
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+};
+
+#define CU824_PLL_STATE_REG 0xFE80002F
+#define PCR 0x800000E2
+
+/* ------------------------------------------------------------------------- */
+
+/* compute the memory bus clock frequency */
+ulong get_bus_freq (ulong dummy)
+{
+ unsigned char pll_cfg;
+#if defined(CONFIG_MPC8240) && !defined(CONFIG_CU824)
+ return (CONFIG_SYS_CLK_FREQ) * (CONFIG_PLL_PCI_TO_MEM_MULTIPLIER);
+#elif defined(CONFIG_CU824)
+ pll_cfg = *(volatile unsigned char *) (CU824_PLL_STATE_REG);
+ pll_cfg &= 0x1f;
+#else
+ CONFIG_READ_BYTE(PCR, pll_cfg);
+ pll_cfg = (pll_cfg >> 3) & 0x1f;
+#endif
+ return ((CONFIG_SYS_CLK_FREQ) * pll_pci_to_mem_multiplier[pll_cfg] + 5) / 10;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/* This gives the Memory to CPU Core multiplier times 10 */
+/* The index is the value of PLLRATIO in HID1 */
+/* This is documented in the MPC8240 Hardware Specs */
+/* This is not documented for MPC8245 ? FIXME */
+short pllratio_to_factor[] = {
+ 0, 0, 0, 10, 20, 20, 25, 45,
+ 30, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 10, 0, 0, 0, 45,
+ 30, 0, 40, 0, 0, 0, 35, 0,
+};
+
+/* compute the CPU and memory bus clock frequencies */
+int get_clocks (void)
+{
+ uint hid1 = mfspr(HID1);
+ hid1 = (hid1 >> (32-5)) & 0x1f;
+ gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
+ / 10;
+ gd->bus_clk = get_bus_freq(0);
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot - Startup Code for PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0x00000100 and the code is executed
+ * from flash. The code is organized to be at an other address
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memorymap.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <config.h>
+#include <mpc824x.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+/* FP, Machine Check and Recoverable Interr. */
+#define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI )
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+#if defined(CONFIG_FADS)
+ GOT_ENTRY(environment)
+#endif
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+boot_warm:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*----------------------------------------------------------------------*/
+ li r3, MSR_KERNEL /* Set FP, ME, RI flags */
+ mtmsr r3
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ addis r0,0,0x0000 /* lets make sure that r0 is really 0 */
+ mtspr HID0, r0 /* disable I and D caches */
+
+ mfspr r3, ICR /* clear Interrupt Cause Register */
+
+ mfmsr r3 /* turn off address translation */
+ addis r4,0,0xffff
+ ori r4,r4,0xffcf
+ and r3,r3,r4
+ mtmsr r3
+ isync
+ sync /* the MMU should be off... */
+
+
+in_flash:
+#if defined(CONFIG_BMW)
+ bl early_init_f /* Must be ASM: no stack yet! */
+#endif
+ /*
+ * Setup BATs - cannot be done in C since we don't have a stack yet
+ */
+ bl setup_bats
+
+ /* Enable MMU.
+ */
+ mfmsr r3
+ ori r3, r3, (MSR_IR | MSR_DR)
+ mtmsr r3
+#if !defined(CONFIG_BMW)
+ /* Enable and invalidate data cache.
+ */
+ mfspr r3, HID0
+ mr r2, r3
+ ori r3, r3, HID0_DCE | HID0_DCI
+ ori r2, r2, HID0_DCE
+ sync
+ mtspr HID0, r3
+ mtspr HID0, r2
+ sync
+
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+ li r2, 128
+ mtctr r2
+1:
+ dcbz r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+
+ /* Lock way0 in data cache.
+ */
+ mfspr r3, 1011
+ lis r2, 0xffff
+ ori r2, r2, 0xff1f
+ and r3, r3, r2
+ ori r3, r3, 0x0080
+ sync
+ mtspr 1011, r3
+#endif /* !CONFIG_BMW */
+ /*
+ * Thisk the stack pointer *somewhere* sensible. Doesnt
+ * matter much where as we'll move it when we relocate
+ */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*----------------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (from Flash) */
+
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException)
+
+/* Instruction Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = EXC_OFF_ALIGN
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = EXC_OFF_PROGRAM
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* No FPU on MPC8xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+ STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException)
+
+ STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException)
+ STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
+ STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
+ STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
+ STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
+ STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+ STD_EXCEPTION(0x1c00, ReservedC, UnknownException)
+ STD_EXCEPTION(0x1d00, ReservedD, UnknownException)
+ STD_EXCEPTION(0x1e00, ReservedE, UnknownException)
+ STD_EXCEPTION(0x1f00, ReservedF, UnknownException)
+
+ STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException)
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+#if 0
+ andi. r23,r23,MSR_PR
+ mfspr r23,SPRG3 /* if from user, fix up tss.regs */
+ beq 2f
+ addi r24,r1,STACK_FRAME_OVERHEAD
+ stw r24,PT_REGS(r23)
+2: addi r2,r23,-TSS /* set r2 to current */
+ tovirt(r2,r2,r23)
+#endif
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+#if 0
+ addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
+ cmplw 0,r1,r2
+ cmplw 1,r1,r24
+ crand 1,1,4
+ bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
+#endif
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ ori r20,r20,0x30 /* enable IR, DR */
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/* Cache functions.
+*/
+ .globl icache_enable
+icache_enable:
+ mfspr r5,HID0 /* turn on the I cache. */
+ ori r5,r5,0x8800 /* Instruction cache only! */
+ addis r6,0,0xFFFF
+ ori r6,r6,0xF7FF
+ and r6,r5,r6 /* clear the invalidate bit */
+ sync
+ mtspr HID0,r5
+ mtspr HID0,r6
+ isync
+ sync
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r5,HID0
+ addis r6,0,0xFFFF
+ ori r6,r6,0x7FFF
+ and r5,r5,r6
+ sync
+ mtspr HID0,r5
+ isync
+ sync
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ srwi r3, r3, 15 /* >>15 & 1=> select bit 16 */
+ andi. r3, r3, 1
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r5,HID0 /* turn on the D cache. */
+ ori r5,r5,0x4400 /* Data cache only! */
+ mfspr r4, PVR /* read PVR */
+ srawi r3, r4, 16 /* shift off the least 16 bits */
+ cmpi 0, 0, r3, 0xC /* Check for Max pvr */
+ bne NotMax
+ ori r5,r5,0x0040 /* setting the DCFA bit, for Max rev 1 errata */
+NotMax:
+ addis r6,0,0xFFFF
+ ori r6,r6,0xFBFF
+ and r6,r5,r6 /* clear the invalidate bit */
+ sync
+ mtspr HID0,r5
+ mtspr HID0,r6
+ isync
+ sync
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r5,HID0
+ addis r6,0,0xFFFF
+ ori r6,r6,0xBFFF
+ and r5,r5,r6
+ sync
+ mtspr HID0,r5
+ isync
+ sync
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ srwi r3, r3, 14 /* >>14 & 1=> select bit 17 */
+ andi. r3, r3, 1
+ blr
+
+ .globl dc_read
+dc_read:
+/*TODO : who uses this, what should it do?
+*/
+ blr
+
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+#ifdef CONFIG_SYS_RAMBOOT
+ lis r4, CONFIG_SYS_SDRAM_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_SDRAM_BASE@l
+#else
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+#endif
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* the the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+4:
+#if !defined(CONFIG_BMW)
+/* Unlock the data cache and invalidate locked area */
+ xor r0, r0, r0
+ mtspr 1011, r0
+ lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
+ li r0, 128
+ mtctr r0
+41:
+ dcbi r0, r4
+ addi r4, r4, 32
+ bdnz 41b
+#endif
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+ cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ blt 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mtlr r4 /* restore link register */
+ blr
+
+ /* Setup the BAT registers.
+ */
+setup_bats:
+ lis r4, CONFIG_SYS_IBAT0L@h
+ ori r4, r4, CONFIG_SYS_IBAT0L@l
+ lis r3, CONFIG_SYS_IBAT0U@h
+ ori r3, r3, CONFIG_SYS_IBAT0U@l
+ mtspr IBAT0L, r4
+ mtspr IBAT0U, r3
+ isync
+
+ lis r4, CONFIG_SYS_DBAT0L@h
+ ori r4, r4, CONFIG_SYS_DBAT0L@l
+ lis r3, CONFIG_SYS_DBAT0U@h
+ ori r3, r3, CONFIG_SYS_DBAT0U@l
+ mtspr DBAT0L, r4
+ mtspr DBAT0U, r3
+ isync
+
+ lis r4, CONFIG_SYS_IBAT1L@h
+ ori r4, r4, CONFIG_SYS_IBAT1L@l
+ lis r3, CONFIG_SYS_IBAT1U@h
+ ori r3, r3, CONFIG_SYS_IBAT1U@l
+ mtspr IBAT1L, r4
+ mtspr IBAT1U, r3
+ isync
+
+ lis r4, CONFIG_SYS_DBAT1L@h
+ ori r4, r4, CONFIG_SYS_DBAT1L@l
+ lis r3, CONFIG_SYS_DBAT1U@h
+ ori r3, r3, CONFIG_SYS_DBAT1U@l
+ mtspr DBAT1L, r4
+ mtspr DBAT1U, r3
+ isync
+
+ lis r4, CONFIG_SYS_IBAT2L@h
+ ori r4, r4, CONFIG_SYS_IBAT2L@l
+ lis r3, CONFIG_SYS_IBAT2U@h
+ ori r3, r3, CONFIG_SYS_IBAT2U@l
+ mtspr IBAT2L, r4
+ mtspr IBAT2U, r3
+ isync
+
+ lis r4, CONFIG_SYS_DBAT2L@h
+ ori r4, r4, CONFIG_SYS_DBAT2L@l
+ lis r3, CONFIG_SYS_DBAT2U@h
+ ori r3, r3, CONFIG_SYS_DBAT2U@l
+ mtspr DBAT2L, r4
+ mtspr DBAT2U, r3
+ isync
+
+ lis r4, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ lis r3, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+ isync
+
+ lis r4, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ lis r3, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+ isync
+
+ /* Invalidate TLBs.
+ * -> for (val = 0; val < 0x20000; val+=0x1000)
+ * -> tlbie(val);
+ */
+ lis r3, 0
+ lis r5, 2
+
+1:
+ tlbie r3
+ addi r3, r3, 0x1000
+ cmp 0, 0, r3, r5
+ blt 1b
+
+ blr
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x00400000
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ printf("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2001-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc824x/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o kgdb.o
+COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
+ interrupts.o ether_fcc.o i2c.o commproc.o \
+ bedbug_603e.o pci.o spi.o
+
+COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
+
+COBJS += $(COBJS-y)
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Bedbug Functions specific to the MPC603e core
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <bedbug/type.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/regs.h>
+#include <bedbug/ppc.h>
+
+#if defined(CONFIG_CMD_BEDBUG) \
+ && (defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260))
+
+#define MAX_BREAK_POINTS 1
+
+extern CPU_DEBUG_CTX bug_ctx;
+
+void bedbug603e_init __P((void));
+void bedbug603e_do_break __P((cmd_tbl_t*,int,int,char*[]));
+void bedbug603e_break_isr __P((struct pt_regs*));
+int bedbug603e_find_empty __P((void));
+int bedbug603e_set __P((int,unsigned long));
+int bedbug603e_clear __P((int));
+
+\f
+/* ======================================================================
+ * Initialize the global bug_ctx structure for the processor. Clear all
+ * of the breakpoints.
+ * ====================================================================== */
+
+void bedbug603e_init( void )
+{
+ int i;
+ /* -------------------------------------------------- */
+
+ bug_ctx.hw_debug_enabled = 0;
+ bug_ctx.stopped = 0;
+ bug_ctx.current_bp = 0;
+ bug_ctx.regs = NULL;
+
+ bug_ctx.do_break = bedbug603e_do_break;
+ bug_ctx.break_isr = bedbug603e_break_isr;
+ bug_ctx.find_empty = bedbug603e_find_empty;
+ bug_ctx.set = bedbug603e_set;
+ bug_ctx.clear = bedbug603e_clear;
+
+ for( i = 1; i <= MAX_BREAK_POINTS; ++i )
+ (*bug_ctx.clear)( i );
+
+ puts ("BEDBUG:ready\n");
+ return;
+} /* bedbug_init_breakpoints */
+
+
+\f
+/* ======================================================================
+ * Set/clear/show the hardware breakpoint for the 603e. The "off"
+ * string will disable a specific breakpoint. The "show" string will
+ * display the current breakpoints. Otherwise an address will set a
+ * breakpoint at that address. Setting a breakpoint uses the CPU-specific
+ * set routine which will assign a breakpoint number.
+ * ====================================================================== */
+
+void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
+ char *argv[])
+{
+ long addr; /* Address to break at */
+ int which_bp; /* Breakpoint number */
+ /* -------------------------------------------------- */
+
+ if (argc < 2)
+ {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ /* Turn off a breakpoint */
+
+ if( strcmp( argv[ 1 ], "off" ) == 0 )
+ {
+ if( bug_ctx.hw_debug_enabled == 0 )
+ {
+ puts ( "No breakpoints enabled\n" );
+ return;
+ }
+
+ which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
+
+ if( bug_ctx.clear )
+ (*bug_ctx.clear)( which_bp );
+
+ printf( "Breakpoint %d removed\n", which_bp );
+ return;
+ }
+
+ /* Show a list of breakpoints */
+
+ if( strcmp( argv[ 1 ], "show" ) == 0 )
+ {
+ for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
+ {
+
+ addr = GET_IABR();
+
+ printf( "Breakpoint [%d]: ", which_bp );
+ if( (addr & 0x00000002) == 0 )
+ puts ( "NOT SET\n" );
+ else
+ disppc( (unsigned char *)(addr & 0xFFFFFFFC), 0, 1, bedbug_puts, F_RADHEX );
+ }
+ return;
+ }
+
+ /* Set a breakpoint at the address */
+
+ if(!(( isdigit( argv[ 1 ][ 0 ] )) ||
+ (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) ||
+ (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' ))))
+ {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ addr = simple_strtoul( argv[ 1 ], NULL, 16 );
+
+ if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
+ {
+ printf( "Breakpoint [%d]: ", which_bp );
+ disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+ }
+
+ return;
+} /* bedbug603e_do_break */
+
+
+\f
+/* ======================================================================
+ * Handle a breakpoint. Enter a mini main loop. Stay in the loop until
+ * the stopped flag in the debug context is cleared.
+ * ====================================================================== */
+
+void bedbug603e_break_isr( struct pt_regs *regs )
+{
+ unsigned long addr; /* Address stopped at */
+ /* -------------------------------------------------- */
+
+ bug_ctx.current_bp = 1;
+ addr = GET_IABR() & 0xFFFFFFFC;
+
+ bedbug_main_loop( addr, regs );
+ return;
+} /* bedbug603e_break_isr */
+
+
+\f
+/* ======================================================================
+ * See if the hardware breakpoint is available.
+ * ====================================================================== */
+
+int bedbug603e_find_empty( void )
+{
+ /* -------------------------------------------------- */
+
+ if( (GET_IABR() && 0x00000002) == 0 )
+ return 1;
+
+ return 0;
+} /* bedbug603e_find_empty */
+
+
+\f
+/* ======================================================================
+ * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
+ * number, otherwise reassign the given breakpoint. If hardware debugging
+ * is not enabled, then turn it on via the MSR and DBCR0. Set the break
+ * address in the IABR register.
+ * ====================================================================== */
+
+int bedbug603e_set( int which_bp, unsigned long addr )
+{
+ /* -------------------------------------------------- */
+
+ if(( addr & 0x00000003 ) != 0 )
+ {
+ puts ( "Breakpoints must be on a 32 bit boundary\n" );
+ return 0;
+ }
+
+ /* Only look if which_bp == 0, else use which_bp */
+ if(( bug_ctx.find_empty ) && ( !which_bp ) &&
+ ( which_bp = (*bug_ctx.find_empty)()) == 0 )
+ {
+ puts ( "All breakpoints in use\n" );
+ return 0;
+ }
+
+ if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
+ {
+ printf( "Invalid break point # %d\n", which_bp );
+ return 0;
+ }
+
+ if( ! bug_ctx.hw_debug_enabled )
+ {
+ bug_ctx.hw_debug_enabled = 1;
+ }
+
+ SET_IABR( addr | 0x00000002 );
+
+ return which_bp;
+} /* bedbug603e_set */
+
+
+\f
+/* ======================================================================
+ * Disable a specific breakoint by setting the IABR register to zero.
+ * ====================================================================== */
+
+int bedbug603e_clear( int which_bp )
+{
+ /* -------------------------------------------------- */
+
+ if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
+ {
+ printf( "Invalid break point # (%d)\n", which_bp );
+ return -1;
+ }
+
+ SET_IABR( 0 );
+
+ return 0;
+} /* bedbug603e_clear */
+
+
+/* ====================================================================== */
+#endif
--- /dev/null
+/*
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
+ * copyright notice:
+ *
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <common.h>
+#include <asm/cpm_8260.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void
+m8260_cpm_reset(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ulong count;
+
+ /* Reclaim the DP memory for our use.
+ */
+ gd->dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+
+ /*
+ * Reset CPM
+ */
+ immr->im_cpm.cp_cpcr = CPM_CR_RST;
+ count = 0;
+ do { /* Spin until command processed */
+ __asm__ __volatile__ ("eieio");
+ } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
+
+#ifdef CONFIG_HARD_I2C
+ *((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
+#endif
+}
+
+/* Allocate some memory from the dual ported ram.
+ * To help protocols with object alignment restrictions, we do that
+ * if they ask.
+ */
+uint
+m8260_cpm_dpalloc(uint size, uint align)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ align_mask = align - 1;
+ savebase = gd->dp_alloc_base;
+
+ if ((off = (gd->dp_alloc_base & align_mask)) != 0)
+ gd->dp_alloc_base += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += align - off;
+
+ if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
+ gd->dp_alloc_base = savebase;
+ panic("m8260_cpm_dpalloc: ran out of dual port ram!");
+ }
+
+ retloc = gd->dp_alloc_base;
+ gd->dp_alloc_base += size;
+
+ memset((void *)&immr->im_dprambase[retloc], 0, size);
+
+ return(retloc);
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8260_cpm_hostalloc(uint size, uint align)
+{
+ /* the host might not even have RAM yet - just use dual port RAM */
+ return (m8260_cpm_dpalloc(size, align));
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK gd->brg_clk
+#define BRG_UART_CLK (BRG_INT_CLK / 16)
+
+/* This function is used by UARTs, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+m8260_cpm_setbrg(uint brg, uint rate)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+ uint cd = BRG_UART_CLK / rate;
+
+ if ((BRG_UART_CLK % rate) < (rate / 2))
+ cd--;
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (cd << 1) | CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+m8260_cpm_fastbrg(uint brg, uint rate, int div16)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (div16)
+ *bp |= CPM_BRG_DIV16;
+}
+
+/* This function is used to set baud rate generators using an external
+ * clock source and 16x oversampling.
+ */
+
+void
+m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (pinsel == 0)
+ *bp |= CPM_BRG_EXTC_CLK3_9;
+ else
+ *bp |= CPM_BRG_EXTC_CLK5_15;
+}
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+void post_word_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
+
+ *save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
+
+ return *save_addr;
+}
+
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
+
+ save_addr[0] = a;
+ save_addr[1] = BOOTCOUNT_MAGIC;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
+
+ if (save_addr[1] != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return save_addr[0];
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \
+ -mstring -mcpu=603e -mmultiple
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8260/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * modified by
+ * Wolfgang Denk <wd@denx.de>
+ *
+ * modified for 8260 by
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * added 8260 masks by
+ * Marius Groeger <mag@sysgo.de>
+ *
+ * added HiP7 (824x/827x/8280) processors support by
+ * Yuli Barcohen <yuli@arabellasw.com>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8260.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/cpm_8260.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_GET_CPU_STR_F)
+extern int get_cpu_str_f (char *buf);
+#endif
+
+int checkcpu (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ ulong clock = gd->cpu_clk;
+ uint pvr = get_pvr ();
+ uint immr, rev, m, k;
+ char buf[32];
+
+ puts ("CPU: ");
+
+ switch (pvr) {
+ case PVR_8260:
+ case PVR_8260_HIP3:
+ k = 3;
+ break;
+ case PVR_8260_HIP4:
+ k = 4;
+ break;
+ case PVR_8260_HIP7R1:
+ case PVR_8260_HIP7RA:
+ case PVR_8260_HIP7:
+ k = 7;
+ break;
+ default:
+ return -1; /* whoops! not an MPC8260 */
+ }
+ rev = pvr & 0xff;
+
+ immr = immap->im_memctl.memc_immr;
+ if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR)
+ return -1; /* whoops! someone moved the IMMR */
+
+#if defined(CONFIG_GET_CPU_STR_F)
+ get_cpu_str_f (buf);
+ printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev);
+#else
+ printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
+#endif
+
+ /*
+ * the bottom 16 bits of the immr are the Part Number and Mask Number
+ * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the
+ * RISC Microcode Revision Number (13-10).
+ * For the 8260, Motorola doesn't include the Microcode Revision
+ * in the mask.
+ */
+ m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
+ k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]);
+
+ switch (m) {
+ case 0x0000:
+ puts ("0.2 2J24M");
+ break;
+ case 0x0010:
+ puts ("A.0 K22A");
+ break;
+ case 0x0011:
+ puts ("A.1 1K22A-XC");
+ break;
+ case 0x0001:
+ puts ("B.1 1K23A");
+ break;
+ case 0x0021:
+ puts ("B.2 2K23A-XC");
+ break;
+ case 0x0023:
+ puts ("B.3 3K23A");
+ break;
+ case 0x0024:
+ puts ("C.2 6K23A");
+ break;
+ case 0x0060:
+ puts ("A.0(A) 2K25A");
+ break;
+ case 0x0062:
+ puts ("B.1 4K25A");
+ break;
+ case 0x0064:
+ puts ("C.0 5K25A");
+ break;
+ case 0x0A00:
+ puts ("0.0 0K49M");
+ break;
+ case 0x0A01:
+ puts ("0.1 1K49M");
+ break;
+ case 0x0A10:
+ puts ("1.0 1K49M");
+ break;
+ case 0x0C00:
+ puts ("0.0 0K50M");
+ break;
+ case 0x0C10:
+ puts ("1.0 1K50M");
+ break;
+ case 0x0D00:
+ puts ("0.0 0K50M");
+ break;
+ case 0x0D10:
+ puts ("1.0 1K50M");
+ break;
+ default:
+ printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
+ break;
+ }
+
+ printf (") at %s MHz\n", strmhz (buf, clock));
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+/* configures a UPM by writing into the UPM RAM array */
+/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */
+/* NOTE: the physical address chosen must not overlap into any other area */
+/* mapped by the memory controller because bank 11 has the lowest priority */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */
+ uint i;
+
+ /* first set up bank 11 to reference the correct UPM at a dummy address */
+
+ memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */
+
+ switch (upm) {
+
+ case UPMA:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA |
+ BRx_V;
+ memctl->memc_mamr = MxMR_OP_WARR;
+ break;
+
+ case UPMB:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB |
+ BRx_V;
+ memctl->memc_mbmr = MxMR_OP_WARR;
+ break;
+
+ case UPMC:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC |
+ BRx_V;
+ memctl->memc_mcmr = MxMR_OP_WARR;
+ break;
+
+ default:
+ panic ("upmconfig passed invalid UPM number (%u)\n", upm);
+ break;
+
+ }
+
+ /*
+ * at this point, the dummy address is set up to access the selected UPM,
+ * the MAD pointer is zero, and the MxMR OP is set for writing to RAM
+ *
+ * now we simply load the mdr with each word and poke the dummy address.
+ * the MAD is incremented on each access.
+ */
+
+ for (i = 0; i < size; i++) {
+ memctl->memc_mdr = table[i];
+ *dummy = 0;
+ }
+
+ /* now kill bank 11 */
+ memctl->memc_br11 = 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if !defined(CONFIG_HAVE_OWN_RESET)
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr, addr;
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
+ * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+
+}
+#endif /* CONFIG_HAVE_OWN_RESET */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return (tbclk);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
+void ft_cpu_setup (void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob);
+#endif
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", OF_TBCLK, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* CONFIG_OF_LIBFDT */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_ETHER_ON_FCC)
+ fec_initialize(bis);
+#endif
+#if defined(CONFIG_ETHER_ON_SCC)
+ mpc82xx_scc_enet_initialize(bis);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+#include <ioports.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
+extern unsigned long board_get_cpu_clk_f (void);
+#endif
+
+static void config_8260_ioports (volatile immap_t * immr)
+{
+ int portnum;
+
+ for (portnum = 0; portnum < 4; portnum++) {
+ uint pmsk = 0,
+ ppar = 0,
+ psor = 0,
+ pdir = 0,
+ podr = 0,
+ pdat = 0;
+ iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
+ iop_conf_t *eiopc = iopc + 32;
+ uint msk = 1;
+
+ /*
+ * NOTE:
+ * index 0 refers to pin 31,
+ * index 31 refers to pin 0
+ */
+ while (iopc < eiopc) {
+ if (iopc->conf) {
+ pmsk |= msk;
+ if (iopc->ppar)
+ ppar |= msk;
+ if (iopc->psor)
+ psor |= msk;
+ if (iopc->pdir)
+ pdir |= msk;
+ if (iopc->podr)
+ podr |= msk;
+ if (iopc->pdat)
+ pdat |= msk;
+ }
+
+ msk <<= 1;
+ iopc++;
+ }
+
+ if (pmsk != 0) {
+ volatile ioport_t *iop = ioport_addr (immr, portnum);
+ uint tpmsk = ~pmsk;
+
+ /*
+ * the (somewhat confused) paragraph at the
+ * bottom of page 35-5 warns that there might
+ * be "unknown behaviour" when programming
+ * PSORx and PDIRx, if PPARx = 1, so I
+ * decided this meant I had to disable the
+ * dedicated function first, and enable it
+ * last.
+ */
+ iop->ppar &= tpmsk;
+ iop->psor = (iop->psor & tpmsk) | psor;
+ iop->podr = (iop->podr & tpmsk) | podr;
+ iop->pdat = (iop->pdat & tpmsk) | pdat;
+ iop->pdir = (iop->pdir & tpmsk) | pdir;
+ iop->ppar |= ppar;
+ }
+ }
+}
+
+#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask))
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
+ uint sccr;
+#endif
+#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
+ unsigned long cpu_clk;
+#endif
+ volatile memctl8260_t *memctl = &immr->im_memctl;
+ extern void m8260_cpm_reset (void);
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* RSR - Reset Status Register - clear all status (5-4) */
+ gd->reset_status = immr->im_clkrst.car_rsr;
+ immr->im_clkrst.car_rsr = RSR_ALLBITS;
+
+ /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
+ immr->im_clkrst.car_rmr = CONFIG_SYS_RMR;
+
+ /* BCR - Bus Configuration Register (4-25) */
+#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE)
+ if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
+ immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010);
+ } else {
+ immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010);
+ }
+#else
+ immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR;
+#endif
+
+ /* SIUMCR - contains debug pin configuration (4-31) */
+#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH)
+ cpu_clk = board_get_cpu_clk_f ();
+ if (cpu_clk >= 100000000) {
+ immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000);
+ } else {
+ immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000);
+ }
+#else
+ immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
+#endif
+
+ config_8260_ioports (immr);
+
+ /* initialize time counter status and control register (4-40) */
+ immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC;
+
+ /* initialize the PIT (4-42) */
+ immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
+ /* System clock control register (9-8) */
+ sccr = immr->im_clkrst.car_sccr &
+ (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
+ immr->im_clkrst.car_sccr = sccr |
+ (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
+#endif /* !CONFIG_COGENT */
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CONFIG_SYS_OR0_REMAP)
+ memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+ memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
+#endif
+
+ /* now restrict to preliminary range */
+ /* the PS came from the HRCW, don´t change it */
+ memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
+ memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+ memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
+ memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
+ memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM)
+ memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM;
+ memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM)
+ memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM;
+ memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM)
+ memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM;
+ memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM)
+ memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM;
+ memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM;
+#endif
+
+ m8260_cpm_reset ();
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+ volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
+
+ immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
+
+ return (0);
+}
+
+/*
+ * print out the reason for the reset
+ */
+int prt_8260_rsr (void)
+{
+ static struct {
+ ulong mask;
+ char *desc;
+ } bits[] = {
+ {
+ RSR_JTRS, "JTAG"}, {
+ RSR_CSRS, "Check Stop"}, {
+ RSR_SWRS, "Software Watchdog"}, {
+ RSR_BMRS, "Bus Monitor"}, {
+ RSR_ESRS, "External Soft"}, {
+ RSR_EHRS, "External Hard"}
+ };
+ static int n = sizeof bits / sizeof bits[0];
+ ulong rsr = gd->reset_status;
+ int i;
+ char *sep;
+
+ puts (CPU_ID_STR " Reset Status:");
+
+ sep = " ";
+ for (i = 0; i < n; i++)
+ if (rsr & bits[i].mask) {
+ printf ("%s%s", sep, bits[i].desc);
+ sep = ", ";
+ }
+
+ puts ("\n\n");
+ return (0);
+}
--- /dev/null
+/*
+ * MPC8260 FCC Fast Ethernet
+ *
+ * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8260 FCC Fast Ethernet
+ * Basic ET HW initialization and packet RX/TX routines
+ *
+ * This code will not perform the IO port configuration. This should be
+ * done in the iop_conf_t structure specific for the board.
+ *
+ * TODO:
+ * add a PHY driver to do the negotiation
+ * reflect negotiation results in FPSMR
+ * look for ways to configure the board specific stuff elsewhere, eg.
+ * config_xxx.h or the board directory
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/cpm_8260.h>
+#include <mpc8260.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
+ defined(CONFIG_NET_MULTI)
+
+static struct ether_fcc_info_s
+{
+ int ether_index;
+ int proff_enet;
+ ulong cpm_cr_enet_sblock;
+ ulong cpm_cr_enet_page;
+ ulong cmxfcr_mask;
+ ulong cmxfcr_value;
+}
+ ether_fcc_info[] =
+{
+#ifdef CONFIG_ETHER_ON_FCC1
+{
+ 0,
+ PROFF_FCC1,
+ CPM_CR_FCC1_SBLOCK,
+ CPM_CR_FCC1_PAGE,
+ CONFIG_SYS_CMXFCR_MASK1,
+ CONFIG_SYS_CMXFCR_VALUE1
+},
+#endif
+
+#ifdef CONFIG_ETHER_ON_FCC2
+{
+ 1,
+ PROFF_FCC2,
+ CPM_CR_FCC2_SBLOCK,
+ CPM_CR_FCC2_PAGE,
+ CONFIG_SYS_CMXFCR_MASK2,
+ CONFIG_SYS_CMXFCR_VALUE2
+},
+#endif
+
+#ifdef CONFIG_ETHER_ON_FCC3
+{
+ 2,
+ PROFF_FCC3,
+ CPM_CR_FCC3_SBLOCK,
+ CPM_CR_FCC3_PAGE,
+ CONFIG_SYS_CMXFCR_MASK3,
+ CONFIG_SYS_CMXFCR_VALUE3
+},
+#endif
+};
+
+/*---------------------------------------------------------------------*/
+
+/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
+#define PKT_MAXDMA_SIZE 1520
+
+/* The FCC stores dest/src/type, data, and checksum for receive packets. */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+
+/* Maximum input buffer size. Must be a multiple of 32. */
+#define PKT_MAXBLR_SIZE 1536
+
+#define TOUT_LOOP 1000000
+
+#define TX_BUF_CNT 2
+#ifdef __GNUC__
+static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8)));
+#else
+#error "txbuf must be 64-bit aligned"
+#endif
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FCC Ethernet Tx and Rx buffer descriptors.
+ * Provide for Double Buffering
+ * Note: PKTBUFSRX is defined in net.h
+ */
+
+typedef volatile struct rtxbd {
+ cbd_t rxbd[PKTBUFSRX];
+ cbd_t txbd[TX_BUF_CNT];
+} RTXBD;
+
+/* Good news: the FCC supports external BDs! */
+#ifdef __GNUC__
+static RTXBD rtx __attribute__ ((aligned(8)));
+#else
+#error "rtx must be 64-bit aligned"
+#endif
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int i;
+ int result = 0;
+
+ if (length <= 0) {
+ printf("fec: bad packet size: %d\n", length);
+ goto out;
+ }
+
+ for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ puts ("fec: tx buffer not ready\n");
+ goto out;
+ }
+ }
+
+ rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx.txbd[txIdx].cbd_datlen = length;
+ rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
+ BD_ENET_TX_WRAP);
+
+ for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ puts ("fec: tx error\n");
+ goto out;
+ }
+ }
+
+#ifdef ET_DEBUG
+ printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc);
+#endif
+
+ /* return only status bits */
+ result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
+
+out:
+ return result;
+}
+
+static int fec_recv(struct eth_device* dev)
+{
+ int length;
+
+ for (;;)
+ {
+ if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+ length = rtx.rxbd[rxIdx].cbd_datlen;
+
+ if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
+ printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
+ }
+ else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ }
+
+
+ /* Give the buffer back to the FCC. */
+ rtx.rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ }
+ else {
+ rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+ }
+ return length;
+}
+
+
+static int fec_init(struct eth_device* dev, bd_t *bis)
+{
+ struct ether_fcc_info_s * info = dev->priv;
+ int i;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8260_t *cp = &(immr->im_cpm);
+ fcc_enet_t *pram_ptr;
+ unsigned long mem_addr;
+
+#if 0
+ mii_discover_phy();
+#endif
+
+ /* 28.9 - (1-2): ioports have been set up already */
+
+ /* 28.9 - (3): connect FCC's tx and rx clocks */
+ immr->im_cpmux.cmx_uar = 0;
+ immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) |
+ info->cmxfcr_value;
+
+ /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
+ immr->im_fcc[info->ether_index].fcc_gfmr =
+ FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+
+ /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */
+ immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
+
+ /* 28.9 - (6): FDSR: Ethernet Syn */
+ immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555;
+
+ /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
+ rxIdx = 0;
+ txIdx = 0;
+
+ /* Setup Receiver Buffer Descriptors */
+ for (i = 0; i < PKTBUFSRX; i++)
+ {
+ rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx.rxbd[i].cbd_datlen = 0;
+ rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
+ }
+ rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /* Setup Ethernet Transmitter Buffer Descriptors */
+ for (i = 0; i < TX_BUF_CNT; i++)
+ {
+ rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ rtx.txbd[i].cbd_datlen = 0;
+ rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
+ }
+ rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* 28.9 - (7): initialise parameter ram */
+ pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]);
+
+ /* clear whole structure to make sure all reserved fields are zero */
+ memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
+
+ /*
+ * common Parameter RAM area
+ *
+ * Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ */
+ mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
+ pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
+ pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
+ /*
+ * Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ */
+ pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
+ pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
+ CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
+ pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
+ pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
+ CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
+ pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
+
+ /* protocol-specific area */
+ pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
+ pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
+ pram_ptr->fen_retlim = 15; /* Retry limit threshold */
+ pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
+ /*
+ * Set Ethernet station address.
+ *
+ * This is supplied in the board information structure, so we
+ * copy that into the controller.
+ * So, far we have only been given one Ethernet address. We make
+ * it unique by setting a few bits in the upper byte of the
+ * non-static part of the address.
+ */
+#define ea eth_get_dev()->enetaddr
+ pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+ pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
+ /* pad pointer. use tiptr since we don't need a specific padding char */
+ pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
+ pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */
+ pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */
+ pram_ptr->fen_rfthr = 1;
+ pram_ptr->fen_rfcnt = 1;
+#if 0
+ printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n",
+ pram_ptr->fen_genfcc.fcc_rbase);
+ printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n",
+ pram_ptr->fen_genfcc.fcc_tbase);
+#endif
+
+ /* 28.9 - (8): clear out events in FCCE */
+ immr->im_fcc[info->ether_index].fcc_fcce = ~0x0;
+
+ /* 28.9 - (9): FCCM: mask all events */
+ immr->im_fcc[info->ether_index].fcc_fccm = 0;
+
+ /* 28.9 - (10-12): we don't use ethernet interrupts */
+
+ /* 28.9 - (13)
+ *
+ * Let's re-initialize the channel now. We have to do it later
+ * than the manual describes because we have just now finished
+ * the BD initialization.
+ */
+ cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
+ info->cpm_cr_enet_sblock,
+ 0x0c,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cp_cpcr & CPM_CR_FLG);
+
+ /* 28.9 - (14): enable tx/rx in gfmr */
+ immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+
+ return 1;
+}
+
+static void fec_halt(struct eth_device* dev)
+{
+ struct ether_fcc_info_s * info = dev->priv;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ /* write GFMR: disable tx/rx */
+ immr->im_fcc[info->ether_index].fcc_gfmr &=
+ ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+}
+
+int fec_initialize(bd_t *bis)
+{
+ struct eth_device* dev;
+ int i;
+
+ for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
+ {
+ dev = (struct eth_device*) malloc(sizeof *dev);
+ memset(dev, 0, sizeof *dev);
+
+ sprintf(dev->name, "FCC%d ETHERNET",
+ ether_fcc_info[i].ether_index + 1);
+ dev->priv = ðer_fcc_info[i];
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ eth_register(dev);
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
+ && defined(CONFIG_BITBANGMII)
+ miiphy_register(dev->name,
+ bb_miiphy_read, bb_miiphy_write);
+#endif
+ }
+
+ return 1;
+}
+
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+
+#define ELBT_BUFSZ 1024 /* must be multiple of 32 */
+
+#define ELBT_CRCSZ 4
+
+#define ELBT_NRXBD 4 /* must be at least 2 */
+#define ELBT_NTXBD 4
+
+#define ELBT_MAXRXERR 32
+#define ELBT_MAXTXERR 32
+
+#define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */
+
+typedef
+ struct {
+ uint off;
+ char *lab;
+ }
+elbt_prdesc;
+
+typedef
+ struct {
+ uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl;
+ uint badsrc, badtyp, badlen, badbit;
+ }
+elbt_rxeacc;
+
+static elbt_prdesc rxeacc_descs[] = {
+ { offsetof(elbt_rxeacc, _l), "Not Last in Frame" },
+ { offsetof(elbt_rxeacc, _f), "Not First in Frame" },
+ { offsetof(elbt_rxeacc, m), "Address Miss" },
+ { offsetof(elbt_rxeacc, bc), "Broadcast Address" },
+ { offsetof(elbt_rxeacc, mc), "Multicast Address" },
+ { offsetof(elbt_rxeacc, lg), "Frame Length Violation"},
+ { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" },
+ { offsetof(elbt_rxeacc, sh), "Short Frame" },
+ { offsetof(elbt_rxeacc, cr), "CRC Error" },
+ { offsetof(elbt_rxeacc, ov), "Overrun" },
+ { offsetof(elbt_rxeacc, cl), "Collision" },
+ { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" },
+ { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" },
+ { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" },
+ { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" },
+};
+static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]);
+
+typedef
+ struct {
+ uint def, hb, lc, rl, rc, un, csl;
+ }
+elbt_txeacc;
+
+static elbt_prdesc txeacc_descs[] = {
+ { offsetof(elbt_txeacc, def), "Defer Indication" },
+ { offsetof(elbt_txeacc, hb), "Heartbeat" },
+ { offsetof(elbt_txeacc, lc), "Late Collision" },
+ { offsetof(elbt_txeacc, rl), "Retransmission Limit" },
+ { offsetof(elbt_txeacc, rc), "Retry Count" },
+ { offsetof(elbt_txeacc, un), "Underrun" },
+ { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" },
+};
+static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]);
+
+typedef
+ struct {
+ uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ];
+ uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ];
+ cbd_t rxbd[ELBT_NRXBD];
+ cbd_t txbd[ELBT_NTXBD];
+ enum { Idle, Running, Closing, Closed } state;
+ int proff, page, sblock;
+ uint clstime, nsent, ntxerr, nrcvd, nrxerr;
+ ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR];
+ elbt_rxeacc rxeacc;
+ elbt_txeacc txeacc;
+ } __attribute__ ((aligned(8)))
+elbt_chan;
+
+static uchar patbytes[ELBT_NTXBD] = {
+ 0xff, 0xaa, 0x55, 0x00
+};
+static uint patwords[ELBT_NTXBD] = {
+ 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000
+};
+
+#ifdef __GNUC__
+static elbt_chan elbt_chans[3] __attribute__ ((aligned(8)));
+#else
+#error "elbt_chans must be 64-bit aligned"
+#endif
+
+#define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005)
+
+static elbt_prdesc epram_descs[] = {
+ { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" },
+ { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" },
+ { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" },
+ { offsetof(fcc_enet_t, fen_octc), "Octets" },
+ { offsetof(fcc_enet_t, fen_colc), "Collisions" },
+ { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" },
+ { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" },
+ { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" },
+ { offsetof(fcc_enet_t, fen_frgc), "Fragments" },
+ { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" },
+ { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" },
+ { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" },
+ { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" },
+ { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" },
+ { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" },
+ { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" },
+ { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"},
+};
+static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]);
+
+/*
+ * given an elbt_prdesc array and an array of base addresses, print
+ * each prdesc down the screen with the values fetched from each
+ * base address across the screen
+ */
+static void
+print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase)
+{
+ elbt_prdesc *dp = descs, *edp = dp + ndesc;
+ int i;
+
+ printf ("%32s", "");
+
+ for (i = 0; i < nbase; i++)
+ printf (" Channel %d", i);
+
+ putc ('\n');
+
+ while (dp < edp) {
+
+ printf ("%-32s", dp->lab);
+
+ for (i = 0; i < nbase; i++) {
+ uint val = *(uint *)(bases[i] + dp->off);
+
+ printf (" %10u", val);
+ }
+
+ putc ('\n');
+
+ dp++;
+ }
+}
+
+/*
+ * return number of bits that are set in a value; value contains
+ * nbits (right-justified) bits.
+ */
+static uint __inline__
+nbs (uint value, uint nbits)
+{
+ uint cnt = 0;
+#if 1
+ uint pos = sizeof (uint) * 8;
+
+ __asm__ __volatile__ ("\
+ mtctr %2\n\
+1: rlwnm. %2,%1,%4,31,31\n\
+ beq 2f\n\
+ addi %0,%0,1\n\
+2: subi %4,%4,1\n\
+ bdnz 1b"
+ : "=r"(cnt)
+ : "r"(value), "r"(nbits), "r"(cnt), "r"(pos)
+ : "ctr", "cc" );
+#else
+ uint mask = 1;
+
+ do {
+ if (value & mask)
+ cnt++;
+ mask <<= 1;
+ } while (--nbits);
+#endif
+
+ return (cnt);
+}
+
+static ulong
+badbits (uchar *bp, int n, ulong pat)
+{
+ ulong *lp, cnt = 0;
+ int nl;
+
+ while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) {
+ uchar diff;
+
+ diff = *bp++ ^ (uchar)pat;
+
+ if (diff)
+ cnt += nbs ((ulong)diff, 8);
+
+ n--;
+ }
+
+ lp = (ulong *)bp;
+ nl = n / sizeof (ulong);
+ n -= nl * sizeof (ulong);
+
+ while (nl > 0) {
+ ulong diff;
+
+ diff = *lp++ ^ pat;
+
+ if (diff)
+ cnt += nbs (diff, 32);
+
+ nl--;
+ }
+
+ bp = (uchar *)lp;
+
+ while (n > 0) {
+ uchar diff;
+
+ diff = *bp++ ^ (uchar)pat;
+
+ if (diff)
+ cnt += nbs ((ulong)diff, 8);
+
+ n--;
+ }
+
+ return (cnt);
+}
+
+static inline unsigned short
+swap16 (unsigned short x)
+{
+ return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
+}
+
+/* broadcast is not an error - we send them like that */
+#define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC)
+
+void
+eth_loopback_test (void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8260_t *cp = &(immr->im_cpm);
+ int c, nclosed;
+ ulong runtime, nmsec;
+ uchar *bases[3];
+
+ puts ("FCC Ethernet External loopback test\n");
+
+ eth_getenv_enetaddr("ethaddr", NetOurEther);
+
+ /*
+ * global initialisations for all FCC channels
+ */
+
+ /* 28.9 - (1-2): ioports have been set up already */
+
+#if defined(CONFIG_HYMOD)
+ /*
+ * Attention: this is board-specific
+ * 0, FCC1
+ * 1, FCC2
+ * 2, FCC3
+ */
+# define FCC_START_LOOP 0
+# define FCC_END_LOOP 2
+
+ /*
+ * Attention: this is board-specific
+ * - FCC1 Rx-CLK is CLK10
+ * - FCC1 Tx-CLK is CLK11
+ * - FCC2 Rx-CLK is CLK13
+ * - FCC2 Tx-CLK is CLK14
+ * - FCC3 Rx-CLK is CLK15
+ * - FCC3 Tx-CLK is CLK16
+ */
+
+ /* 28.9 - (3): connect FCC's tx and rx clocks */
+ immr->im_cpmux.cmx_uar = 0;
+ immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
+ CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
+ CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
+#elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
+ /*
+ * Attention: this is board-specific
+ * 1, FCC2
+ */
+# define FCC_START_LOOP 1
+# define FCC_END_LOOP 1
+
+ /*
+ * Attention: this is board-specific
+ * - FCC2 Rx-CLK is CLK13
+ * - FCC2 Tx-CLK is CLK14
+ */
+
+ /* 28.9 - (3): connect FCC's tx and rx clocks */
+ immr->im_cpmux.cmx_uar = 0;
+ immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
+#else
+#error "eth_loopback_test not supported on your board"
+#endif
+
+ puts ("Initialise FCC channels:");
+
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
+ elbt_chan *ecp = &elbt_chans[c];
+ volatile fcc_t *fcp = &immr->im_fcc[c];
+ volatile fcc_enet_t *fpp;
+ int i;
+ ulong addr;
+
+ /*
+ * initialise channel data
+ */
+
+ printf (" %d", c);
+
+ memset ((void *)ecp, 0, sizeof (*ecp));
+
+ ecp->state = Idle;
+
+ switch (c) {
+
+ case 0: /* FCC1 */
+ ecp->proff = PROFF_FCC1;
+ ecp->page = CPM_CR_FCC1_PAGE;
+ ecp->sblock = CPM_CR_FCC1_SBLOCK;
+ break;
+
+ case 1: /* FCC2 */
+ ecp->proff = PROFF_FCC2;
+ ecp->page = CPM_CR_FCC2_PAGE;
+ ecp->sblock = CPM_CR_FCC2_SBLOCK;
+ break;
+
+ case 2: /* FCC3 */
+ ecp->proff = PROFF_FCC3;
+ ecp->page = CPM_CR_FCC3_PAGE;
+ ecp->sblock = CPM_CR_FCC3_SBLOCK;
+ break;
+ }
+
+ /*
+ * set up tx buffers and bds
+ */
+
+ for (i = 0; i < ELBT_NTXBD; i++) {
+ cbd_t *bdp = &ecp->txbd[i];
+ uchar *bp = &ecp->txbufs[i][0];
+
+ bdp->cbd_bufaddr = (uint)bp;
+ /* room for crc */
+ bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ;
+ bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
+ BD_ENET_TX_LAST | BD_ENET_TX_TC;
+
+ memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
+ NetSetEther (bp, NetBcastAddr, 0x8000);
+ }
+ ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /*
+ * set up rx buffers and bds
+ */
+
+ for (i = 0; i < ELBT_NRXBD; i++) {
+ cbd_t *bdp = &ecp->rxbd[i];
+ uchar *bp = &ecp->rxbufs[i][0];
+
+ bdp->cbd_bufaddr = (uint)bp;
+ bdp->cbd_datlen = 0;
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+
+ memset ((void *)bp, 0, ELBT_BUFSZ);
+ }
+ ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * set up the FCC channel hardware
+ */
+
+ /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
+ fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+
+ /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */
+ fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \
+ FCC_PSMR_ENCRC | FCC_PSMR_PRO | \
+ FCC_PSMR_MON | FCC_PSMR_RSH;
+
+ /* 28.9 - (6): FDSR: Ethernet Syn */
+ fcp->fcc_fdsr = 0xD555;
+
+ /* 29.9 - (7): initialise parameter ram */
+ fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]);
+
+ /* clear whole struct to make sure all resv fields are zero */
+ memset ((void *)fpp, 0, sizeof (fcc_enet_t));
+
+ /*
+ * common Parameter RAM area
+ *
+ * Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ */
+ addr = CPM_FCC_SPECIAL_BASE + (c * 64);
+ fpp->fen_genfcc.fcc_riptr = addr;
+ fpp->fen_genfcc.fcc_tiptr = addr + 32;
+
+ /*
+ * Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ * buffers are in 60x bus memory.
+ */
+ fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
+ fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
+ fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]);
+ fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
+ fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]);
+
+ /* protocol-specific area */
+ fpp->fen_cmask = 0xdebb20e3; /* CRC mask */
+ fpp->fen_cpres = 0xffffffff; /* CRC preset */
+ fpp->fen_retlim = 15; /* Retry limit threshold */
+ fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */
+
+ /*
+ * Set Ethernet station address.
+ *
+ * This is supplied in the board information structure, so we
+ * copy that into the controller.
+ * So, far we have only been given one Ethernet address. We use
+ * the same address for all channels
+ */
+#define ea NetOurEther
+ fpp->fen_paddrh = (ea[5] << 8) + ea[4];
+ fpp->fen_paddrm = (ea[3] << 8) + ea[2];
+ fpp->fen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+ fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
+ /*
+ * pad pointer. use tiptr since we don't need
+ * a specific padding char
+ */
+ fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr;
+ fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */
+ fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */
+ fpp->fen_rfthr = 1;
+ fpp->fen_rfcnt = 1;
+
+ /* 28.9 - (8): clear out events in FCCE */
+ fcp->fcc_fcce = ~0x0;
+
+ /* 28.9 - (9): FCCM: mask all events */
+ fcp->fcc_fccm = 0;
+
+ /* 28.9 - (10-12): we don't use ethernet interrupts */
+
+ /* 28.9 - (13)
+ *
+ * Let's re-initialize the channel now. We have to do it later
+ * than the manual describes because we have just now finished
+ * the BD initialization.
+ */
+ cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \
+ 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cp_cpcr & CPM_CR_FLG);
+ }
+
+ puts (" done\nStarting test... (Ctrl-C to Finish)\n");
+
+ /*
+ * Note: don't want serial output from here until the end of the
+ * test - the delays would probably stuff things up.
+ */
+
+ clear_ctrlc ();
+ runtime = get_timer (0);
+
+ do {
+ nclosed = 0;
+
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
+ volatile fcc_t *fcp = &immr->im_fcc[c];
+ elbt_chan *ecp = &elbt_chans[c];
+ int i;
+
+ switch (ecp->state) {
+
+ case Idle:
+ /*
+ * set the channel Running ...
+ */
+
+ /* 28.9 - (14): enable tx/rx in gfmr */
+ fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+
+ ecp->state = Running;
+ break;
+
+ case Running:
+ /*
+ * (while Running only) check for
+ * termination of the test
+ */
+
+ (void)ctrlc ();
+
+ if (had_ctrlc ()) {
+ /*
+ * initiate a "graceful stop transmit"
+ * on the channel
+ */
+ cp->cp_cpcr = mk_cr_cmd (ecp->page, \
+ ecp->sblock, 0x0c, \
+ CPM_CR_GRACEFUL_STOP_TX) | \
+ CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cp_cpcr & CPM_CR_FLG);
+
+ ecp->clstime = get_timer (0);
+ ecp->state = Closing;
+ }
+ /* fall through ... */
+
+ case Closing:
+ /*
+ * (while Running or Closing) poll the channel:
+ * - check for any non-READY tx buffers and
+ * make them ready
+ * - check for any non-EMPTY rx buffers and
+ * check that they were received correctly,
+ * adjust counters etc, then make empty
+ */
+
+ for (i = 0; i < ELBT_NTXBD; i++) {
+ cbd_t *bdp = &ecp->txbd[i];
+ ushort sc = bdp->cbd_sc;
+
+ if ((sc & BD_ENET_TX_READY) != 0)
+ continue;
+
+ /*
+ * this frame has finished
+ * transmitting
+ */
+ ecp->nsent++;
+
+ if (sc & BD_ENET_TX_STATS) {
+ ulong n;
+
+ /*
+ * we had an error on
+ * the transmission
+ */
+ n = ecp->ntxerr++;
+ if (n < ELBT_MAXTXERR)
+ ecp->txerrs[n] = sc;
+
+ if (sc & BD_ENET_TX_DEF)
+ ecp->txeacc.def++;
+ if (sc & BD_ENET_TX_HB)
+ ecp->txeacc.hb++;
+ if (sc & BD_ENET_TX_LC)
+ ecp->txeacc.lc++;
+ if (sc & BD_ENET_TX_RL)
+ ecp->txeacc.rl++;
+ if (sc & BD_ENET_TX_RCMASK)
+ ecp->txeacc.rc++;
+ if (sc & BD_ENET_TX_UN)
+ ecp->txeacc.un++;
+ if (sc & BD_ENET_TX_CSL)
+ ecp->txeacc.csl++;
+
+ bdp->cbd_sc &= \
+ ~BD_ENET_TX_STATS;
+ }
+
+ if (ecp->state == Closing)
+ ecp->clstime = get_timer (0);
+
+ /* make it ready again */
+ bdp->cbd_sc |= BD_ENET_TX_READY;
+ }
+
+ for (i = 0; i < ELBT_NRXBD; i++) {
+ cbd_t *bdp = &ecp->rxbd[i];
+ ushort sc = bdp->cbd_sc, mask;
+
+ if ((sc & BD_ENET_RX_EMPTY) != 0)
+ continue;
+
+ /* we have a new frame in this buffer */
+ ecp->nrcvd++;
+
+ mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST;
+ if ((sc & mask) != mask) {
+ /* somethings wrong here ... */
+ if (!(sc & BD_ENET_RX_LAST))
+ ecp->rxeacc._l++;
+ if (!(sc & BD_ENET_RX_FIRST))
+ ecp->rxeacc._f++;
+ }
+
+ if (sc & BD_ENET_RX_ERRS) {
+ ulong n;
+
+ /*
+ * we had some sort of error
+ * on the frame
+ */
+ n = ecp->nrxerr++;
+ if (n < ELBT_MAXRXERR)
+ ecp->rxerrs[n] = sc;
+
+ if (sc & BD_ENET_RX_MISS)
+ ecp->rxeacc.m++;
+ if (sc & BD_ENET_RX_BC)
+ ecp->rxeacc.bc++;
+ if (sc & BD_ENET_RX_MC)
+ ecp->rxeacc.mc++;
+ if (sc & BD_ENET_RX_LG)
+ ecp->rxeacc.lg++;
+ if (sc & BD_ENET_RX_NO)
+ ecp->rxeacc.no++;
+ if (sc & BD_ENET_RX_SH)
+ ecp->rxeacc.sh++;
+ if (sc & BD_ENET_RX_CR)
+ ecp->rxeacc.cr++;
+ if (sc & BD_ENET_RX_OV)
+ ecp->rxeacc.ov++;
+ if (sc & BD_ENET_RX_CL)
+ ecp->rxeacc.cl++;
+
+ bdp->cbd_sc &= \
+ ~BD_ENET_RX_ERRS;
+ }
+ else {
+ ushort datlen = bdp->cbd_datlen;
+ Ethernet_t *ehp;
+ ushort prot;
+ int ours, tb, n, nbytes;
+
+ ehp = (Ethernet_t *) \
+ &ecp->rxbufs[i][0];
+
+ ours = memcmp (ehp->et_src, \
+ NetOurEther, 6);
+
+ prot = swap16 (ehp->et_protlen);
+ tb = prot & 0x8000;
+ n = prot & 0x7fff;
+
+ nbytes = ELBT_BUFSZ - \
+ offsetof (Ethernet_t, \
+ et_dsap) - \
+ ELBT_CRCSZ;
+
+ /* check the frame is correct */
+ if (datlen != ELBT_BUFSZ)
+ ecp->rxeacc.badlen++;
+ else if (!ours)
+ ecp->rxeacc.badsrc++;
+ else if (!tb || n >= ELBT_NTXBD)
+ ecp->rxeacc.badtyp++;
+ else {
+ ulong patword = \
+ patwords[n];
+ uint nbb;
+
+ nbb = badbits ( \
+ &ehp->et_dsap, \
+ nbytes, \
+ patword);
+
+ ecp->rxeacc.badbit += \
+ nbb;
+ }
+ }
+
+ if (ecp->state == Closing)
+ ecp->clstime = get_timer (0);
+
+ /* make it empty again */
+ bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+ }
+
+ if (ecp->state != Closing)
+ break;
+
+ /*
+ * (while Closing) check to see if
+ * waited long enough
+ */
+
+ if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) {
+ /* write GFMR: disable tx/rx */
+ fcp->fcc_gfmr &= \
+ ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ ecp->state = Closed;
+ }
+
+ break;
+
+ case Closed:
+ nclosed++;
+ break;
+ }
+ }
+
+ } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
+
+ runtime = get_timer (runtime);
+ if (runtime <= ELBT_CLSWAIT) {
+ printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n",
+ runtime, ELBT_CLSWAIT);
+ return;
+ }
+ nmsec = runtime - ELBT_CLSWAIT;
+
+ printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n",
+ nmsec, ELBT_CLSWAIT);
+
+ /*
+ * now print stats
+ */
+
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
+ elbt_chan *ecp = &elbt_chans[c];
+ uint rxpps, txpps, nerr;
+
+ rxpps = (ecp->nrcvd * 1000) / nmsec;
+ txpps = (ecp->nsent * 1000) / nmsec;
+
+ printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), "
+ "%d sent (%d pps, %d txerrs)\n\n", c,
+ ecp->nrcvd, rxpps, ecp->nrxerr,
+ ecp->nsent, txpps, ecp->ntxerr);
+
+ if ((nerr = ecp->nrxerr) > 0) {
+ ulong i;
+
+ printf ("\tFirst %d rx errs:", nerr);
+ for (i = 0; i < nerr; i++)
+ printf (" %04x", ecp->rxerrs[i]);
+ putc ('\n');
+ }
+
+ if ((nerr = ecp->ntxerr) > 0) {
+ ulong i;
+
+ printf ("\tFirst %d tx errs:", nerr);
+ for (i = 0; i < nerr; i++)
+ printf (" %04x", ecp->txerrs[i]);
+ putc ('\n');
+ }
+ }
+
+ puts ("Receive Error Counts:\n");
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
+ bases[c] = (uchar *)&elbt_chans[c].rxeacc;
+ print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
+
+ puts ("\nTransmit Error Counts:\n");
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
+ bases[c] = (uchar *)&elbt_chans[c].txeacc;
+ print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
+
+ puts ("\nRMON(-like) Counters:\n");
+ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
+ bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
+ print_desc (epram_descs, epram_ndesc, bases, 3);
+}
+
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+#endif
--- /dev/null
+/*
+ * MPC8260 SCC Ethernet
+ *
+ * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright (c) 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * Modified so that it plays nicely when more than one ETHERNET interface
+ * is in use a la ether_fcc.c.
+ * (C) Copyright 2008
+ * DENX Software Engineerin GmbH
+ * Gary Jennejohn <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/cpm_8260.h>
+#include <mpc8260.h>
+#include <malloc.h>
+#include <net.h>
+#include <command.h>
+#include <config.h>
+
+#ifndef CONFIG_NET_MULTI
+#error "CONFIG_NET_MULTI must be defined."
+#endif
+
+#if (CONFIG_ETHER_INDEX == 1)
+# define PROFF_ENET PROFF_SCC1
+# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE
+# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK
+# define CMXSCR_MASK (CMXSCR_SC1 |\
+ CMXSCR_RS1CS_MSK |\
+ CMXSCR_TS1CS_MSK)
+
+#elif (CONFIG_ETHER_INDEX == 2)
+# define PROFF_ENET PROFF_SCC2
+# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE
+# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK
+# define CMXSCR_MASK (CMXSCR_SC2 |\
+ CMXSCR_RS2CS_MSK |\
+ CMXSCR_TS2CS_MSK)
+
+#elif (CONFIG_ETHER_INDEX == 3)
+# define PROFF_ENET PROFF_SCC3
+# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE
+# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK
+# define CMXSCR_MASK (CMXSCR_SC3 |\
+ CMXSCR_RS3CS_MSK |\
+ CMXSCR_TS3CS_MSK)
+#elif (CONFIG_ETHER_INDEX == 4)
+# define PROFF_ENET PROFF_SCC4
+# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE
+# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK
+# define CMXSCR_MASK (CMXSCR_SC4 |\
+ CMXSCR_RS4CS_MSK |\
+ CMXSCR_TS4CS_MSK)
+
+#endif
+
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#if !defined(CONFIG_SYS_SCC_TOUT_LOOP)
+ #define CONFIG_SYS_SCC_TOUT_LOOP 1000000
+#endif
+
+static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+
+static int sec_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ int i;
+ int result = 0;
+
+ if (length <= 0) {
+ printf("scc: bad packet size: %d\n", length);
+ goto out;
+ }
+
+ for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
+ puts ("scc: tx buffer not ready\n");
+ goto out;
+ }
+ }
+
+ rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
+ BD_ENET_TX_WRAP);
+
+ for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
+ puts ("scc: tx error\n");
+ goto out;
+ }
+ }
+
+ /* return only status bits */
+ result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
+
+ out:
+ return result;
+}
+
+
+static int sec_rx(struct eth_device *dev)
+{
+ int length;
+
+ for (;;)
+ {
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
+ {
+ printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
+ }
+ else
+ {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ }
+
+
+ /* Give the buffer back to the SCC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
+ BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ }
+ else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+ }
+ return length;
+}
+
+/**************************************************************
+ *
+ * SCC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+static int sec_init(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ scc_enet_t *pram_ptr;
+ uint dpaddr;
+ uchar ea[6];
+
+ rxIdx = 0;
+ txIdx = 0;
+
+ /*
+ * Assign static pointer to BD area.
+ * Avoid exhausting DPRAM, which would cause a panic.
+ */
+ if (rtx == NULL) {
+ dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
+ rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
+ }
+
+ /* 24.21 - (1-3): ioports have been set up already */
+
+ /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
+ immr->im_cpmux.cmx_uar = 0;
+ immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
+ CONFIG_SYS_CMXSCR_VALUE);
+
+
+ /* 24.21 (6) write RBASE and TBASE to parameter RAM */
+ pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]);
+ pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]);
+ pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]);
+
+ pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */
+ pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */
+
+ pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */
+
+ pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
+ pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
+
+
+ /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
+ while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
+ CPM_CR_ENET_SBLOCK,
+ 0x0c,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ /* 24.21 - (8-18): Set up parameter RAM */
+ pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
+ pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */
+ pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
+
+ pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
+
+ pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
+
+ pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
+ pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
+
+ pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
+ pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
+
+ pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
+ pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
+ pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
+ pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
+
+ eth_getenv_enetaddr("ethaddr", ea);
+ pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+
+ pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
+
+ pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
+ pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
+ pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
+ pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
+
+ pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
+ pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
+ pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
+
+ /* 24.21 - (19): Initialize RxBD */
+ for (i = 0; i < PKTBUFSRX; i++)
+ {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
+ }
+
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /* 24.21 - (20): Initialize TxBD */
+ for (i = 0; i < TX_BUF_CNT; i++)
+ {
+ rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
+ BD_ENET_TX_LAST |
+ BD_ENET_TX_TC);
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
+ }
+
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* 24.21 - (21): Write 0xffff to SCCE */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0);
+
+ /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
+ SCCE_ENET_RXF |
+ SCCE_ENET_TXB);
+
+ /* 24.21 - (23): we don't use ethernet interrupts */
+
+ /* 24.21 - (24): Clear GSMR_H to enable normal operations */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0;
+
+ /* 24.21 - (25): Clear GSMR_L to enable normal operations */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI |
+ SCC_GSMRL_TPL_48 |
+ SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
+
+ /* 24.21 - (26): Initialize DSR */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
+
+ /* 24.21 - (27): Initialize PSMR2
+ *
+ * Settings:
+ * CRC = 32-Bit CCITT
+ * NIB = Begin searching for SFD 22 bits after RENA
+ * FDE = Full Duplex Enable
+ * BRO = Reject broadcast packets
+ * PROMISCOUS = Catch all packets regardless of dest. MAC adress
+ */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC |
+ SCC_PSMR_NIB22 |
+#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
+ SCC_PSMR_FDE |
+#endif
+#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
+ SCC_PSMR_BRO |
+#endif
+#if defined(CONFIG_SCC_ENET_PROMISCOUS)
+ SCC_PSMR_PRO |
+#endif
+ 0;
+
+ /* 24.21 - (28): Write to GSMR_L to enable SCC */
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
+ SCC_GSMRL_ENT);
+
+ return 0;
+}
+
+
+static void sec_halt(struct eth_device *dev)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
+ SCC_GSMRL_ENT);
+}
+
+#if 0
+static void sec_restart(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
+ SCC_GSMRL_ENT);
+}
+#endif
+
+int mpc82xx_scc_enet_initialize(bd_t *bis)
+{
+ struct eth_device *dev;
+
+ dev = (struct eth_device *) malloc(sizeof *dev);
+ memset(dev, 0, sizeof *dev);
+
+ sprintf(dev->name, "SCC ETHERNET");
+ dev->init = sec_init;
+ dev->halt = sec_halt;
+ dev->send = sec_send;
+ dev->recv = sec_rx;
+
+ eth_register(dev);
+
+ return 1;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_HARD_I2C)
+
+#include <asm/cpm_8260.h>
+#include <i2c.h>
+
+/* define to enable debug messages */
+#undef DEBUG_I2C
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+/* uSec to wait between polls of the i2c */
+#define DELAY_US 100
+/* uSec to wait for the CPM to start processing the buffer */
+#define START_DELAY_US 1000
+
+/*
+ * tx/rx per-byte timeout: we delay DELAY_US uSec between polls so the
+ * timeout will be (tx_length + rx_length) * DELAY_US * TOUT_LOOP
+ */
+#define TOUT_LOOP 5
+
+/*-----------------------------------------------------------------------
+ * Set default values
+ */
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+typedef void (*i2c_ecb_t)(int, int, void *); /* error callback function */
+
+/* This structure keeps track of the bd and buffer space usage. */
+typedef struct i2c_state {
+ int rx_idx; /* index to next free Rx BD */
+ int tx_idx; /* index to next free Tx BD */
+ void *rxbd; /* pointer to next free Rx BD */
+ void *txbd; /* pointer to next free Tx BD */
+ int tx_space; /* number of Tx bytes left */
+ unsigned char *tx_buf; /* pointer to free Tx area */
+ i2c_ecb_t err_cb; /* error callback function */
+ void *cb_data; /* private data to be passed */
+} i2c_state_t;
+
+/* flags for i2c_send() and i2c_receive() */
+#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
+#define I2CF_START_COND 0x02 /* tx: generate start condition */
+#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
+
+/* return codes */
+#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */
+#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */
+#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */
+#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/receive */
+#define I2CERR_IO_ERROR 5 /* had an error during comms */
+
+/* error callback flags */
+#define I2CECB_RX_ERR 0x10 /* this is a receive error */
+#define I2CECB_RX_OV 0x02 /* receive overrun error */
+#define I2CECB_RX_MASK 0x0f /* mask for error bits */
+#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
+#define I2CECB_TX_CL 0x01 /* transmit collision error */
+#define I2CECB_TX_UN 0x02 /* transmit underflow error */
+#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
+#define I2CECB_TX_MASK 0x0f /* mask for error bits */
+#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
+
+#define ERROR_I2C_NONE 0
+#define ERROR_I2C_LENGTH 1
+
+#define I2C_WRITE_BIT 0x00
+#define I2C_READ_BIT 0x01
+
+#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
+
+
+#define NUM_RX_BDS 4
+#define NUM_TX_BDS 4
+#define MAX_TX_SPACE 256
+
+typedef struct I2C_BD
+{
+ unsigned short status;
+ unsigned short length;
+ unsigned char *addr;
+} I2C_BD;
+#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
+
+#define BD_I2C_TX_CL 0x0001 /* collision error */
+#define BD_I2C_TX_UN 0x0002 /* underflow error */
+#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
+#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
+
+#define BD_I2C_RX_ERR BD_SC_OV
+
+#ifdef DEBUG_I2C
+#define PRINTD(x) printf x
+#else
+#define PRINTD(x)
+#endif
+
+/*
+ * Returns the best value of I2BRG to meet desired clock speed of I2C with
+ * input parameters (clock speed, filter, and predivider value).
+ * It returns computer speed value and the difference between it and desired
+ * speed.
+ */
+static inline int
+i2c_roundrate(int hz, int speed, int filter, int modval,
+ int *brgval, int *totspeed)
+{
+ int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
+
+ PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
+ hz, speed, filter, modval));
+
+ div = moddiv * speed;
+ brgdiv = (hz + div - 1) / div;
+
+ PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
+
+ *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
+
+ if ((*brgval < 0) || (*brgval > 255)) {
+ PRINTD(("\t\trejected brgval=%d\n", *brgval));
+ return -1;
+ }
+
+ brgdiv = 2 * (*brgval + 3 + (2 * filter));
+ div = moddiv * brgdiv ;
+ *totspeed = hz / div;
+
+ PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
+
+ return 0;
+}
+
+/*
+ * Sets the I2C clock predivider and divider to meet required clock speed.
+ */
+static int i2c_setrate(int hz, int speed)
+{
+ immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
+ int brgval,
+ modval, /* 0-3 */
+ bestspeed_diff = speed,
+ bestspeed_brgval=0,
+ bestspeed_modval=0,
+ bestspeed_filter=0,
+ totspeed,
+ filter = 0; /* Use this fixed value */
+
+ for (modval = 0; modval < 4; modval++)
+ {
+ if (i2c_roundrate (hz, speed, filter, modval, &brgval, &totspeed) == 0)
+ {
+ int diff = speed - totspeed ;
+
+ if ((diff >= 0) && (diff < bestspeed_diff))
+ {
+ bestspeed_diff = diff ;
+ bestspeed_modval = modval;
+ bestspeed_brgval = brgval;
+ bestspeed_filter = filter;
+ }
+ }
+ }
+
+ PRINTD(("[I2C] Best is:\n"));
+ PRINTD(("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
+ hz, speed,
+ bestspeed_filter, bestspeed_modval, bestspeed_brgval,
+ bestspeed_diff));
+
+ i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
+ i2c->i2c_i2brg = bestspeed_brgval & 0xff;
+
+ PRINTD(("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, i2c->i2c_i2brg));
+
+ return 1 ;
+}
+
+void i2c_init(int speed, int slaveadd)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
+ volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
+ volatile iic_t *iip;
+ ulong rbase, tbase;
+ volatile I2C_BD *rxbd, *txbd;
+ uint dpaddr;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
+ dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
+ if (dpaddr == 0) {
+ /* need to allocate dual port ram */
+ dpaddr = m8260_cpm_dpalloc(64 +
+ (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
+ MAX_TX_SPACE, 64);
+ *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])) = dpaddr;
+ }
+
+ /*
+ * initialise data in dual port ram:
+ *
+ * dpaddr -> parameter ram (64 bytes)
+ * rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
+ * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
+ * tx buffer (MAX_TX_SPACE bytes)
+ */
+
+ iip = (iic_t *)&immap->im_dprambase[dpaddr];
+ memset((void*)iip, 0, sizeof(iic_t));
+
+ rbase = dpaddr + 64;
+ tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
+
+ /* Disable interrupts */
+ i2c->i2c_i2mod = 0x00;
+ i2c->i2c_i2cmr = 0x00;
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2add = slaveadd;
+
+ /*
+ * Set the I2C BRG Clock division factor from desired i2c rate
+ * and current CPU rate (we assume sccr dfbgr field is 0;
+ * divide BRGCLK by 1)
+ */
+ PRINTD(("[I2C] Setting rate...\n"));
+ i2c_setrate (gd->brg_clk, CONFIG_SYS_I2C_SPEED) ;
+
+ /* Set I2C controller in master mode */
+ i2c->i2c_i2com = 0x01;
+
+ /* Initialize Tx/Rx parameters */
+ iip->iic_rbase = rbase;
+ iip->iic_tbase = tbase;
+ rxbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_rbase]);
+ txbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_tbase]);
+
+ PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
+ PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
+ PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ /* Set big endian byte order */
+ iip->iic_tfcr = 0x10;
+ iip->iic_rfcr = 0x10;
+
+ /* Set maximum receive size. */
+ iip->iic_mrblr = I2C_RXTX_LEN;
+
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE,
+ CPM_CR_I2C_SBLOCK,
+ 0x00,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cp_cpcr & CPM_CR_FLG);
+
+ /* Clear events and interrupts */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2cmr = 0x00;
+}
+
+static
+void i2c_newio(i2c_state_t *state)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile iic_t *iip;
+ uint dpaddr;
+
+ PRINTD(("[I2C] i2c_newio\n"));
+
+ dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
+ iip = (iic_t *)&immap->im_dprambase[dpaddr];
+ state->rx_idx = 0;
+ state->tx_idx = 0;
+ state->rxbd = (void*)&immap->im_dprambase[iip->iic_rbase];
+ state->txbd = (void*)&immap->im_dprambase[iip->iic_tbase];
+ state->tx_space = MAX_TX_SPACE;
+ state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
+ state->err_cb = NULL;
+ state->cb_data = NULL;
+
+ PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
+ PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
+
+ /* clear the buffer memory */
+ memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
+}
+
+static
+int i2c_send(i2c_state_t *state,
+ unsigned char address,
+ unsigned char secondary_address,
+ unsigned int flags,
+ unsigned short size,
+ unsigned char *dataout)
+{
+ volatile I2C_BD *txbd;
+ int i,j;
+
+ PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
+ address, secondary_address, flags, size));
+
+ /* trying to send message larger than BD */
+ if (size > I2C_RXTX_LEN)
+ return I2CERR_MSG_TOO_LONG;
+
+ /* no more free bds */
+ if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
+ return I2CERR_NO_BUFFERS;
+
+ txbd = (I2C_BD *)state->txbd;
+ txbd->addr = state->tx_buf;
+
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ if (flags & I2CF_START_COND)
+ {
+ PRINTD(("[I2C] Formatting addresses...\n"));
+ if (flags & I2CF_ENABLE_SECONDARY)
+ {
+ txbd->length = size + 2; /* Length of message plus dest addresses */
+ txbd->addr[0] = address << 1;
+ txbd->addr[1] = secondary_address;
+ i = 2;
+ }
+ else
+ {
+ txbd->length = size + 1; /* Length of message plus dest address */
+ txbd->addr[0] = address << 1; /* Write destination address to BD */
+ i = 1;
+ }
+ }
+ else
+ {
+ txbd->length = size; /* Length of message */
+ i = 0;
+ }
+
+ /* set up txbd */
+ txbd->status = BD_SC_READY;
+ if (flags & I2CF_START_COND)
+ txbd->status |= BD_I2C_TX_START;
+ if (flags & I2CF_STOP_COND)
+ txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+
+ /* Copy data to send into buffer */
+ PRINTD(("[I2C] copy data...\n"));
+ for(j = 0; j < size; i++, j++)
+ txbd->addr[i] = dataout[j];
+
+ PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ txbd->length,
+ txbd->status,
+ txbd->addr[0],
+ txbd->addr[1]));
+
+ /* advance state */
+ state->tx_buf += txbd->length;
+ state->tx_space -= txbd->length;
+ state->tx_idx++;
+ state->txbd = (void*)(txbd + 1);
+
+ return 0;
+}
+
+static
+int i2c_receive(i2c_state_t *state,
+ unsigned char address,
+ unsigned char secondary_address,
+ unsigned int flags,
+ unsigned short size_to_expect,
+ unsigned char *datain)
+{
+ volatile I2C_BD *rxbd, *txbd;
+
+ PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
+
+ /* Expected to receive too much */
+ if (size_to_expect > I2C_RXTX_LEN)
+ return I2CERR_MSG_TOO_LONG;
+
+ /* no more free bds */
+ if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
+ || state->tx_space < 2)
+ return I2CERR_NO_BUFFERS;
+
+ rxbd = (I2C_BD *)state->rxbd;
+ txbd = (I2C_BD *)state->txbd;
+
+ PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ txbd->addr = state->tx_buf;
+
+ /* set up TXBD for destination address */
+ if (flags & I2CF_ENABLE_SECONDARY)
+ {
+ txbd->length = 2;
+ txbd->addr[0] = address << 1; /* Write data */
+ txbd->addr[1] = secondary_address; /* Internal address */
+ txbd->status = BD_SC_READY;
+ }
+ else
+ {
+ txbd->length = 1 + size_to_expect;
+ txbd->addr[0] = (address << 1) | 0x01;
+ txbd->status = BD_SC_READY;
+ memset(&txbd->addr[1], 0, txbd->length);
+ }
+
+ /* set up rxbd for reception */
+ rxbd->status = BD_SC_EMPTY;
+ rxbd->length = size_to_expect;
+ rxbd->addr = datain;
+
+ txbd->status |= BD_I2C_TX_START;
+ if (flags & I2CF_STOP_COND)
+ {
+ txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+ rxbd->status |= BD_SC_WRAP;
+ }
+
+ PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ txbd->length,
+ txbd->status,
+ txbd->addr[0],
+ txbd->addr[1]));
+ PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ rxbd->length,
+ rxbd->status,
+ rxbd->addr[0],
+ rxbd->addr[1]));
+
+ /* advance state */
+ state->tx_buf += txbd->length;
+ state->tx_space -= txbd->length;
+ state->tx_idx++;
+ state->txbd = (void*)(txbd + 1);
+ state->rx_idx++;
+ state->rxbd = (void*)(rxbd + 1);
+
+ return 0;
+}
+
+
+static
+int i2c_doio(i2c_state_t *state)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile iic_t *iip;
+ volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
+ volatile I2C_BD *txbd, *rxbd;
+ int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
+ uint dpaddr;
+
+ PRINTD(("[I2C] i2c_doio\n"));
+
+ if (state->tx_idx <= 0 && state->rx_idx <= 0) {
+ PRINTD(("[I2C] No I/O is queued\n"));
+ return I2CERR_QUEUE_EMPTY;
+ }
+
+ dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
+ iip = (iic_t *)&immap->im_dprambase[dpaddr];
+ iip->iic_rbptr = iip->iic_rbase;
+ iip->iic_tbptr = iip->iic_tbase;
+
+ /* Enable I2C */
+ PRINTD(("[I2C] Enabling I2C...\n"));
+ i2c->i2c_i2mod |= 0x01;
+
+ /* Begin transmission */
+ i2c->i2c_i2com |= 0x80;
+
+ /* Loop until transmit & receive completed */
+
+ if ((n = state->tx_idx) > 0) {
+
+ txbd = ((I2C_BD*)state->txbd) - n;
+ for (i = 0; i < n; i++) {
+ txtimeo += TOUT_LOOP * txbd->length;
+ txbd++;
+ }
+
+ txbd--; /* wait until last in list is done */
+
+ PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
+
+ udelay(START_DELAY_US); /* give it time to start */
+ while((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) {
+ udelay(DELAY_US);
+ if (ctrlc())
+ return (-1);
+ __asm__ __volatile__ ("eieio");
+ }
+ }
+
+ if (txcnt < txtimeo && (n = state->rx_idx) > 0) {
+
+ rxbd = ((I2C_BD*)state->rxbd) - n;
+ for (i = 0; i < n; i++) {
+ rxtimeo += TOUT_LOOP * rxbd->length;
+ rxbd++;
+ }
+
+ rxbd--; /* wait until last in list is done */
+
+ PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
+
+ udelay(START_DELAY_US); /* give it time to start */
+ while((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) {
+ udelay(DELAY_US);
+ if (ctrlc())
+ return (-1);
+ __asm__ __volatile__ ("eieio");
+ }
+ }
+
+ /* Turn off I2C */
+ i2c->i2c_i2mod &= ~0x01;
+
+ if ((n = state->tx_idx) > 0) {
+ for (i = 0; i < n; i++) {
+ txbd = ((I2C_BD*)state->txbd) - (n - i);
+ if ((b = txbd->status & BD_I2C_TX_ERR) != 0) {
+ if (state->err_cb != NULL)
+ (*state->err_cb)(I2CECB_TX_ERR|b, i,
+ state->cb_data);
+ if (rc == 0)
+ rc = I2CERR_IO_ERROR;
+ }
+ }
+ }
+
+ if ((n = state->rx_idx) > 0) {
+ for (i = 0; i < n; i++) {
+ rxbd = ((I2C_BD*)state->rxbd) - (n - i);
+ if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) {
+ if (state->err_cb != NULL)
+ (*state->err_cb)(I2CECB_RX_ERR|b, i,
+ state->cb_data);
+ if (rc == 0)
+ rc = I2CERR_IO_ERROR;
+ }
+ }
+ }
+
+ if ((txtimeo > 0 && txcnt >= txtimeo) || \
+ (rxtimeo > 0 && rxcnt >= rxtimeo)) {
+ if (state->err_cb != NULL)
+ (*state->err_cb)(I2CECB_TIMEOUT, -1, state->cb_data);
+ if (rc == 0)
+ rc = I2CERR_TIMEOUT;
+ }
+
+ return (rc);
+}
+
+static void
+i2c_probe_callback(int flags, int xnum, void *data)
+{
+ /*
+ * the only acceptable errors are a transmit NAK or a receive
+ * overrun - tx NAK means the device does not exist, rx OV
+ * means the device must have responded to the slave address
+ * even though the transfer failed
+ */
+ if (flags == (I2CECB_TX_ERR|I2CECB_TX_NAK))
+ *(int *)data |= 1;
+ if (flags == (I2CECB_RX_ERR|I2CECB_RX_OV))
+ *(int *)data |= 2;
+}
+
+int
+i2c_probe(uchar chip)
+{
+ i2c_state_t state;
+ int rc, err_flag;
+ uchar buf[1];
+
+ i2c_newio(&state);
+
+ state.err_cb = i2c_probe_callback;
+ state.cb_data = (void *) &err_flag;
+ err_flag = 0;
+
+ rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
+
+ if (rc != 0)
+ return (rc); /* probe failed */
+
+ rc = i2c_doio(&state);
+
+ if (rc == 0)
+ return (0); /* device exists - read succeeded */
+
+ if (rc == I2CERR_TIMEOUT)
+ return (-1); /* device does not exist - timeout */
+
+ if (rc != I2CERR_IO_ERROR || err_flag == 0)
+ return (rc); /* probe failed */
+
+ if (err_flag & 1)
+ return (-1); /* device does not exist - had transmit NAK */
+
+ return (0); /* device exists - had receive overrun */
+}
+
+
+int
+i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ i2c_state_t state;
+ uchar xaddr[4];
+ int rc;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
+ * and the extra bits end up in the "chip address" bit slots.
+ * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
+ * chips.
+ *
+ * Note that we consider the length of the address field to still
+ * be one byte because the extra address bits are hidden in the
+ * chip address.
+ */
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ i2c_newio(&state);
+
+ rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+ if (rc != 0) {
+ printf("i2c_read: i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
+ if (rc != 0) {
+ printf("i2c_read: i2c_receive failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_doio(&state);
+ if (rc != 0) {
+ printf("i2c_read: i2c_doio failed (%d)\n", rc);
+ return 1;
+ }
+ return 0;
+}
+
+int
+i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ i2c_state_t state;
+ uchar xaddr[4];
+ int rc;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
+ * and the extra bits end up in the "chip address" bit slots.
+ * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
+ * chips.
+ *
+ * Note that we consider the length of the address field to still
+ * be one byte because the extra address bits are hidden in the
+ * chip address.
+ */
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ i2c_newio(&state);
+
+ rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+ if (rc != 0) {
+ printf("i2c_write: first i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
+ if (rc != 0) {
+ printf("i2c_write: second i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_doio(&state);
+ if (rc != 0) {
+ printf("i2c_write: i2c_doio failed (%d)\n", rc);
+ return 1;
+ }
+ return 0;
+}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+ if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+ i2c_bus_num = bus;
+ } else {
+ int ret;
+
+ ret = i2x_mux_select_mux(bus);
+ if (ret == 0)
+ i2c_bus_num = bus;
+ else
+ return ret;
+ }
+#else
+ if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+ return -1;
+ i2c_bus_num = bus;
+#endif
+ return 0;
+}
+
+#endif /* CONFIG_I2C_MULTI_BUS */
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc8260.h>
+#include <mpc8260_irq.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/****************************************************************************/
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+static struct irq_action irq_handlers[NR_IRQS];
+
+static ulong ppc_cached_irq_mask[NR_MASK_WORDS];
+
+/****************************************************************************/
+/* this section was ripped out of arch/powerpc/kernel/ppc8260_pic.c in the */
+/* Linux/PPC 2.4.x source. There was no copyright notice in that file. */
+
+/* The 8260 internal interrupt controller. It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+static u_char irq_to_siureg[] = {
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static u_char irq_to_siubit[] = {
+ 31, 16, 17, 18, 19, 20, 21, 22,
+ 23, 24, 25, 26, 27, 28, 29, 30,
+ 29, 30, 16, 17, 18, 19, 20, 21,
+ 22, 23, 24, 25, 26, 27, 28, 31,
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 15, 14, 13, 12, 11, 10, 9, 8,
+ 7, 6, 5, 4, 3, 2, 1, 0
+};
+
+static void m8260_mask_irq (unsigned int irq_nr)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int bit, word;
+ volatile uint *simr;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(immr->im_intctl.ic_simrh);
+ ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
+ simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void m8260_unmask_irq (unsigned int irq_nr)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int bit, word;
+ volatile uint *simr;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(immr->im_intctl.ic_simrh);
+ ppc_cached_irq_mask[word] |= (1 << (31 - bit));
+ simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void m8260_mask_and_ack (unsigned int irq_nr)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int bit, word;
+ volatile uint *simr, *sipnr;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(immr->im_intctl.ic_simrh);
+ sipnr = &(immr->im_intctl.ic_sipnrh);
+ ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
+ simr[word] = ppc_cached_irq_mask[word];
+ sipnr[word] = 1 << (31 - bit);
+}
+
+static int m8260_get_irq (struct pt_regs *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int irq;
+ unsigned long bits;
+
+ /* For MPC8260, read the SIVEC register and shift the bits down
+ * to get the irq number. */
+ bits = immr->im_intctl.ic_sivec;
+ irq = bits >> 26;
+ return irq;
+}
+
+/* end of code ripped out of arch/powerpc/kernel/ppc8260_pic.c */
+/****************************************************************************/
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
+
+ /* Initialize the default interrupt mapping priorities */
+ immr->im_intctl.ic_sicr = 0;
+ immr->im_intctl.ic_siprr = 0x05309770;
+ immr->im_intctl.ic_scprrh = 0x05309770;
+ immr->im_intctl.ic_scprrl = 0x05309770;
+
+ /* disable all interrupts and clear all pending bits */
+ immr->im_intctl.ic_simrh = ppc_cached_irq_mask[0] = 0;
+ immr->im_intctl.ic_simrl = ppc_cached_irq_mask[1] = 0;
+ immr->im_intctl.ic_sipnrh = 0xffffffff;
+ immr->im_intctl.ic_sipnrl = 0xffffffff;
+
+#ifdef CONFIG_HYMOD
+ /*
+ * ensure all external interrupt sources default to trigger on
+ * high-to-low transition (i.e. edge triggered active low)
+ */
+ immr->im_intctl.ic_siexr = -1;
+#endif
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+ int irq, unmask = 1;
+
+ irq = m8260_get_irq (regs);
+
+ m8260_mask_and_ack (irq);
+
+ enable_interrupts ();
+
+ if (irq_handlers[irq].handler != NULL)
+ (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
+ else {
+ printf ("\nBogus External Interrupt IRQ %d\n", irq);
+ /*
+ * turn off the bogus interrupt, otherwise it
+ * might repeat forever
+ */
+ unmask = 0;
+ }
+
+ if (unmask)
+ m8260_unmask_irq (irq);
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free an interrupt handler.
+ */
+
+void
+irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf ("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ if (irq_handlers[irq].handler != NULL)
+ printf ("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ m8260_unmask_irq (irq);
+}
+
+void irq_free_handler (int irq)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf ("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ m8260_mask_irq (irq);
+
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
+}
+
+/****************************************************************************/
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+#if defined(CONFIG_CMD_IRQ)
+
+/* ripped this out of ppc4xx/interrupts.c */
+
+/*******************************************************************************
+*
+* irqinfo - print information about PCI devices
+*
+*/
+void
+do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ int irq, re_enable;
+
+ re_enable = disable_interrupts ();
+
+ puts ("\nInterrupt-Information:\n"
+ "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < 32; irq++)
+ if (irq_handlers[irq].handler != NULL)
+ printf ("%02d %08lx %08lx %ld\n", irq,
+ (ulong) irq_handlers[irq].handler,
+ (ulong) irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+
+ if (re_enable)
+ enable_interrupts ();
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <mpc8260.h>
+#include <version.h>
+
+#define CONFIG_8260 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+
+ /*
+ * cache flushing routines for kgdb
+ */
+
+ .globl kgdb_flush_cache_all
+kgdb_flush_cache_all:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICFI|HID0_DCI /* Invalidate All */
+ SYNC
+ mtspr HID0, r3
+ blr
+
+ .globl kgdb_flush_cache_range
+kgdb_flush_cache_range:
+ li r5,CONFIG_SYS_CACHELINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 2b
+ SYNC
+ blr
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * Added support for PCI bridge on MPC8272ADS
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <pci.h>
+#include <mpc8260.h>
+#include <asm/m8260_pci.h>
+#include <asm/io.h>
+#ifdef CONFIG_OF_LIBFDT
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
+ * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
+ *
+ * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
+ * PCI Mem with prefetch
+ *
+ * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
+ * PCI Mem w/o prefetch
+ *
+ * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
+ * 32-bit PCI IO
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
+ * MPC826x local memory
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
+#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
+#else
+#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
+#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#else
+#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
+#endif
+
+#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
+#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+ PICMR_PREFETCH_EN)
+#else
+#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
+#endif
+
+/*
+ * These are the windows that allow the CPU to access PCI address space.
+ * All three PCI master windows, which allow the CPU to access PCI
+ * prefetch, non prefetch, and IO space (see below), must all fit within
+ * these windows.
+ */
+
+/* PCIBR0 */
+#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
+#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
+#else
+#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCIMSK0_MASK
+#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+#else
+#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK
+#endif
+
+/* PCIBR1 */
+#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
+#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
+#else
+#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCIMSK1_MASK
+#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
+#else
+#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK
+#endif
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
+#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#else
+#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
+#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#else
+#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
+#endif
+
+#ifndef CONFIG_SYS_CPU_PCI_MEM_START
+#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#else
+#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
+#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
+#else
+#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
+#endif
+
+#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
+#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+#else
+#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
+#endif
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#else
+#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#else
+#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
+#endif
+
+#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
+#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#else
+#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
+#else
+#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
+#endif
+
+#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
+#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+#else
+#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
+#endif
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the third set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#else
+#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#else
+#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
+#endif
+
+#ifndef CONFIG_SYS_CPU_PCI_IO_START
+#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#else
+#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
+#endif
+
+#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#else
+#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
+#endif
+
+#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
+#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
+#else
+#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
+#endif
+
+/* PCI bus configuration registers.
+ */
+
+#define PCI_CLASS_BRIDGE_CTLR 0x06
+
+
+static inline void pci_outl (u32 addr, u32 data)
+{
+ *(volatile u32 *) addr = cpu_to_le32 (data);
+}
+
+void pci_mpc8250_init (struct pci_controller *hose)
+{
+ u16 tempShort;
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ pci_dev_t host_devno = PCI_BDF (0, 0, 0);
+
+ pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
+ CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);
+
+ /*
+ * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
+ */
+#ifdef CONFIG_MPC8266ADS
+ immap->im_siu_conf.sc_siumcr =
+ (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
+ | SIUMCR_LBPC01;
+#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
+/* nothing to do for this board here */
+#elif defined CONFIG_MPC8272
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_BBD &
+ ~SIUMCR_ESE &
+ ~SIUMCR_PBSE &
+ ~SIUMCR_CDIS &
+ ~SIUMCR_DPPC11 &
+ ~SIUMCR_L2CPC11 &
+ ~SIUMCR_LBPC11 &
+ ~SIUMCR_APPC11 &
+ ~SIUMCR_CS10PC11 &
+ ~SIUMCR_BCTLC11 &
+ ~SIUMCR_MMR11)
+ | SIUMCR_DPPC11
+ | SIUMCR_L2CPC01
+ | SIUMCR_LBPC00
+ | SIUMCR_APPC10
+ | SIUMCR_CS10PC00
+ | SIUMCR_BCTLC00
+ | SIUMCR_MMR11;
+#elif defined(CONFIG_TQM8272)
+/* nothing to do for this Board here */
+#else
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_LBPC11 &
+ ~SIUMCR_CS10PC11 &
+ ~SIUMCR_LBPC11) |
+ SIUMCR_LBPC01 |
+ SIUMCR_CS10PC01 |
+ SIUMCR_APPC10;
+#endif
+
+ /* Make PCI lowest priority */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved */
+ immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
+
+ /* Park bus on core while modifying PCI Bus accesses */
+ immap->im_siu_conf.sc_ppc_acr = 0x6;
+
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+ immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
+ immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
+
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+ immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
+ immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
+#endif
+
+ /* Release PCI RST (by default the PCI RST signal is held low) */
+ immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
+
+ /* give it some time */
+ {
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+ /* Give the PCI cards more time to initialize before query
+ This might be good for other boards also
+ */
+ int i;
+
+ for (i = 0; i < 1000; ++i)
+#endif
+ udelay (1000);
+ }
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ * space. This window is set up using the first set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ * space. This window is set up using the second set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI IO space. This window
+ * is set up using the third set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+ immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
+ immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
+ immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /* See above for description - puts PCI request as highest priority */
+#ifdef CONFIG_MPC8272
+ immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
+#else
+ immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
+#endif
+
+ /* Park the bus on the PCI */
+ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Host mode - specify the bridge as a host-PCI bridge */
+
+ pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
+ PCI_CLASS_BRIDGE_CTLR);
+
+ /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+ pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
+ pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
+ tempShort | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+
+ /* do some bridge init, should be done on all 8260 based bridges */
+ pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
+ 0x08);
+ pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
+ 0xF8);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System memory space */
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
+ pci_set_region (hose->regions + 0,
+ PCI_SLV_MEM_BUS,
+ PCI_SLV_MEM_LOCAL,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+#else
+ pci_set_region (hose->regions + 0,
+ CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_BASE,
+ 0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+#endif
+
+ /* PCI memory space */
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEMIO_BUS,
+ PCI_MSTR_MEMIO_LOCAL,
+ PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
+#else
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEM_BUS,
+ PCI_MSTR_MEM_LOCAL,
+ PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
+#endif
+
+ /* PCI I/O space */
+ pci_set_region (hose->regions + 2,
+ PCI_MSTR_IO_BUS,
+ PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_register_hose (hose);
+ /* Mask off master abort machine checks */
+ immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
+ eieio ();
+
+ hose->last_busno = pci_hose_scan (hose);
+
+
+ /* clear the error in the error status register */
+ immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
+
+ /* unmask master abort machine checks */
+ immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
+ "clock-frequency", gd->pci_clk, 1);
+}
+#endif
+
+#endif /* CONFIG_PCI */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
+ */
+
+/*
+ * Minimal serial functions needed to use one of the SCC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CONS_ON_SCC)
+
+#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
+
+#define SCC_INDEX 0
+#define PROFF_SCC PROFF_SCC1
+#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
+ CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
+
+#define SCC_INDEX 1
+#define PROFF_SCC PROFF_SCC2
+#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
+ CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
+
+#define SCC_INDEX 2
+#define PROFF_SCC PROFF_SCC3
+#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
+ CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
+
+#define SCC_INDEX 3
+#define PROFF_SCC PROFF_SCC4
+#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
+ CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
+
+#else
+
+#error "console not correctly defined"
+
+#endif
+
+int serial_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8260_t *cp = &(im->im_cpm);
+ uint dpaddr;
+
+ /* initialize pointers to SCC */
+
+ sp = (scc_t *) &(im->im_scc[SCC_INDEX]);
+ up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* put the SCC channel into NMSI (non multiplexd serial interface)
+ * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
+ */
+ im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr&~CMXSCR_MASK)|CMXSCR_VALUE;
+
+ /* Set up the baud rate generator.
+ */
+ serial_setbrg ();
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf+2);
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+ tbdf->cbd_sc = BD_SC_WRAP;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+ up->scc_genscc.scc_rfcr = CPMFCR_EB;
+ up->scc_genscc.scc_tfcr = CPMFCR_EB;
+ up->scc_genscc.scc_mrblr = 1;
+ up->scc_maxidl = 0;
+ up->scc_brkcr = 1;
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
+ up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->scc_sccm = 0;
+ sp->scc_scce = 0xffff;
+
+ /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
+ */
+ sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
+ sp->scc_gsmrl = \
+ SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
+
+ /* Set CTS flow control, 1 stop bit, 8 bit character length,
+ * normal async UART mode, no parity
+ */
+ sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
+
+ /* execute the "Init Rx and Tx params" CP command.
+ */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
+
+ return (0);
+}
+
+void
+serial_setbrg (void)
+{
+#if defined(CONFIG_CONS_USE_EXTC)
+ m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
+ CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
+#else
+ m8260_cpm_setbrg(SCC_INDEX, gd->baudrate);
+#endif
+}
+
+void
+serial_putc(const char c)
+{
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf;
+ volatile immap_t *im;
+
+ if (c == '\n')
+ serial_putc ('\r');
+
+ im = (immap_t *)CONFIG_SYS_IMMR;
+ up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+ tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
+
+ /* Wait for last character to go.
+ */
+ while (tbdf->cbd_sc & BD_SC_READY)
+ ;
+
+ /* Load the character into the transmit buffer.
+ */
+ *(volatile char *)tbdf->cbd_bufaddr = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int
+serial_getc(void)
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im;
+ unsigned char c;
+
+ im = (immap_t *)CONFIG_SYS_IMMR;
+ up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+ rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+ /* Wait for character to show up.
+ */
+ while (rbdf->cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* Grab the char and clear the buffer again.
+ */
+ c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+int
+serial_tstc()
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im;
+
+ im = (immap_t *)CONFIG_SYS_IMMR;
+ up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+ rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+ return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
+}
+
+#endif /* CONFIG_CONS_ON_SCC */
+
+#if defined(CONFIG_KGDB_ON_SCC)
+
+#if defined(CONFIG_CONS_ON_SCC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
+#error Whoops! serial console and kgdb are on the same scc serial port
+#endif
+
+#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SCC1 */
+
+#define KGDB_SCC_INDEX 0
+#define KGDB_PROFF_SCC PROFF_SCC1
+#define KGDB_CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
+ CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define KGDB_CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
+#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SCC2 */
+
+#define KGDB_SCC_INDEX 1
+#define KGDB_PROFF_SCC PROFF_SCC2
+#define KGDB_CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
+ CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
+#define KGDB_CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
+#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 3 /* KGDB Port on SCC3 */
+
+#define KGDB_SCC_INDEX 2
+#define KGDB_PROFF_SCC PROFF_SCC3
+#define KGDB_CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
+ CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
+#define KGDB_CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
+#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 4 /* KGDB Port on SCC4 */
+
+#define KGDB_SCC_INDEX 3
+#define KGDB_PROFF_SCC PROFF_SCC4
+#define KGDB_CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
+ CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
+#define KGDB_CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
+#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
+
+#else
+
+#error "kgdb serial port not correctly defined"
+
+#endif
+
+void
+kgdb_serial_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8260_t *cp = &(im->im_cpm);
+ uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
+ char *s, *e;
+
+ if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
+ ulong rate = simple_strtoul(s, &e, 10);
+ if (e > s && *e == '\0')
+ speed = rate;
+ }
+
+ /* initialize pointers to SCC */
+
+ sp = (scc_t *) &(im->im_scc[KGDB_SCC_INDEX]);
+ up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* put the SCC channel into NMSI (non multiplexd serial interface)
+ * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
+ */
+ im->im_cpmux.cmx_scr = \
+ (im->im_cpmux.cmx_scr & ~KGDB_CMXSCR_MASK) | KGDB_CMXSCR_VALUE;
+
+ /* Set up the baud rate generator.
+ */
+#if defined(CONFIG_KGDB_USE_EXTC)
+ m8260_cpm_extcbrg(KGDB_SCC_INDEX, speed,
+ CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
+#else
+ m8260_cpm_setbrg(KGDB_SCC_INDEX, speed);
+#endif
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf+2);
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+ tbdf->cbd_sc = BD_SC_WRAP;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+ up->scc_genscc.scc_rfcr = CPMFCR_EB;
+ up->scc_genscc.scc_tfcr = CPMFCR_EB;
+ up->scc_genscc.scc_mrblr = 1;
+ up->scc_maxidl = 0;
+ up->scc_brkcr = 1;
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
+ up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->scc_sccm = 0;
+ sp->scc_scce = 0xffff;
+
+ /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
+ */
+ sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
+ sp->scc_gsmrl = \
+ SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
+
+ /* Set CTS flow control, 1 stop bit, 8 bit character length,
+ * normal async UART mode, no parity
+ */
+ sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
+
+ /* execute the "Init Rx and Tx params" CP command.
+ */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SCC_PAGE, KGDB_CPM_CR_SCC_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
+
+ printf("SCC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
+}
+
+void
+putDebugChar(const char c)
+{
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf;
+ volatile immap_t *im;
+
+ if (c == '\n')
+ putDebugChar ('\r');
+
+ im = (immap_t *)CONFIG_SYS_IMMR;
+ up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+ tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
+
+ /* Wait for last character to go.
+ */
+ while (tbdf->cbd_sc & BD_SC_READY)
+ ;
+
+ /* Load the character into the transmit buffer.
+ */
+ *(volatile char *)tbdf->cbd_bufaddr = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+putDebugStr (const char *s)
+{
+ while (*s) {
+ putDebugChar (*s++);
+ }
+}
+
+int
+getDebugChar(void)
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im;
+ unsigned char c;
+
+ im = (immap_t *)CONFIG_SYS_IMMR;
+ up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+ rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+ /* Wait for character to show up.
+ */
+ while (rbdf->cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* Grab the char and clear the buffer again.
+ */
+ c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+void
+kgdb_interruptible(int yes)
+{
+ return;
+}
+
+#endif /* CONFIG_KGDB_ON_SCC */
--- /dev/null
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
+ * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the
+ * Linux/PPC sources (m8260_tty.c had no copyright info in it).
+ */
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CONS_ON_SMC)
+
+#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */
+
+#define SMC_INDEX 0
+#define PROFF_SMC_BASE PROFF_SMC1_BASE
+#define PROFF_SMC PROFF_SMC1
+#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
+#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
+#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
+#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
+
+#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */
+
+#define SMC_INDEX 1
+#define PROFF_SMC_BASE PROFF_SMC2_BASE
+#define PROFF_SMC PROFF_SMC2
+#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
+#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
+#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
+#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
+
+#else
+
+#error "console not correctly defined"
+
+#endif
+
+#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
+#define CONFIG_SYS_SMC_RXBUFLEN 1
+#define CONFIG_SYS_MAXIDLE 0
+#else
+#if !defined(CONFIG_SYS_MAXIDLE)
+#error "you must define CONFIG_SYS_MAXIDLE"
+#endif
+#endif
+
+typedef volatile struct serialbuffer {
+ cbd_t rxbd; /* Rx BD */
+ cbd_t txbd; /* Tx BD */
+ uint rxindex; /* index for next character to read */
+ volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
+ volatile uchar txbuf; /* tx buffers */
+} serialbuffer_t;
+
+/* map rs_table index to baud rate generator index */
+static unsigned char brg_map[] = {
+ 6, /* BRG7 for SMC1 */
+ 7, /* BRG8 for SMC2 */
+ 0, /* BRG1 for SCC1 */
+ 1, /* BRG1 for SCC2 */
+ 2, /* BRG1 for SCC3 */
+ 3, /* BRG1 for SCC4 */
+};
+
+int serial_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile cpm8260_t *cp = &(im->im_cpm);
+ uint dpaddr;
+ volatile serialbuffer_t *rtx;
+
+ /* initialize pointers to SMC */
+
+ sp = (smc_t *) &(im->im_smc[SMC_INDEX]);
+ *(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC;
+ up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
+
+ /* Disable transmitter/receiver. */
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ /* allocate size of struct serialbuffer with bd rx/tx,
+ * buffer rx/tx and rx index
+ */
+ dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16);
+
+ rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr];
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
+ rtx->rxbd.cbd_sc = 0;
+
+ rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
+ rtx->txbd.cbd_sc = 0;
+
+ /* Set up the uart parameters in the parameter ram. */
+ up->smc_rbase = dpaddr;
+ up->smc_tbase = dpaddr+sizeof(cbd_t);
+ up->smc_rfcr = CPMFCR_EB;
+ up->smc_tfcr = CPMFCR_EB;
+ up->smc_brklen = 0;
+ up->smc_brkec = 0;
+ up->smc_brkcr = 0;
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Mask all interrupts and remove anything pending. */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ /* put the SMC channel into NMSI (non multiplexd serial interface)
+ * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
+ */
+ im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE;
+
+ /* Set up the baud rate generator. */
+ serial_setbrg ();
+
+ /* Make the first buffer the only buffer. */
+ rtx->txbd.cbd_sc |= BD_SC_WRAP;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* single/multi character receive. */
+ up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
+ up->smc_maxidl = CONFIG_SYS_MAXIDLE;
+ rtx->rxindex = 0;
+
+ /* Initialize Tx/Rx parameters. */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver. */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+
+ return (0);
+}
+
+void
+serial_setbrg (void)
+{
+#if defined(CONFIG_CONS_USE_EXTC)
+ m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
+ CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
+#else
+ m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate);
+#endif
+}
+
+void
+serial_putc(const char c)
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile serialbuffer_t *rtx;
+
+ if (c == '\n')
+ serial_putc ('\r');
+
+ up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
+
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
+
+ /* Wait for last character to go. */
+ while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY)
+ ;
+ rtx->txbuf = c;
+ rtx->txbd.cbd_datlen = 1;
+ rtx->txbd.cbd_sc |= BD_SC_READY;
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int
+serial_getc(void)
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile serialbuffer_t *rtx;
+ unsigned char c;
+
+ up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
+
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
+
+ /* Wait for character to show up. */
+ while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* the characters are read one by one,
+ * use the rxindex to know the next char to deliver
+ */
+ c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex);
+ rtx->rxindex++;
+
+ /* check if all char are readout, then make prepare for next receive */
+ if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
+ rtx->rxindex = 0;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
+ }
+ return(c);
+}
+
+int
+serial_tstc()
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile serialbuffer_t *rtx;
+
+ up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
+
+ return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
+}
+
+#endif /* CONFIG_CONS_ON_SMC */
+
+#if defined(CONFIG_KGDB_ON_SMC)
+
+#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
+#error Whoops! serial console and kgdb are on the same smc serial port
+#endif
+
+#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */
+
+#define KGDB_SMC_INDEX 0
+#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE
+#define KGDB_PROFF_SMC PROFF_SMC1
+#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
+#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
+#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
+#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
+
+#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */
+
+#define KGDB_SMC_INDEX 1
+#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE
+#define KGDB_PROFF_SMC PROFF_SMC2
+#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
+#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
+#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
+#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
+
+#else
+
+#error "console not correctly defined"
+
+#endif
+
+void
+kgdb_serial_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8260_t *cp = &(im->im_cpm);
+ uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
+ char *s, *e;
+
+ if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
+ ulong rate = simple_strtoul(s, &e, 10);
+ if (e > s && *e == '\0')
+ speed = rate;
+ }
+
+ /* initialize pointers to SMC */
+
+ sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]);
+ *(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC;
+ up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
+
+ /* Disable transmitter/receiver. */
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf+2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the uart parameters in the parameter ram. */
+ up->smc_rbase = dpaddr;
+ up->smc_tbase = dpaddr+sizeof(cbd_t);
+ up->smc_rfcr = CPMFCR_EB;
+ up->smc_tfcr = CPMFCR_EB;
+ up->smc_brklen = 0;
+ up->smc_brkec = 0;
+ up->smc_brkcr = 0;
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Mask all interrupts and remove anything pending. */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ /* put the SMC channel into NMSI (non multiplexd serial interface)
+ * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
+ */
+ im->im_cpmux.cmx_smr =
+ (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE;
+
+ /* Set up the baud rate generator. */
+#if defined(CONFIG_KGDB_USE_EXTC)
+ m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed,
+ CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
+#else
+ m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed);
+#endif
+
+ /* Make the first buffer the only buffer. */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Single character receive. */
+ up->smc_mrblr = 1;
+ up->smc_maxidl = 0;
+
+ /* Initialize Tx/Rx parameters. */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver. */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+
+ printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
+}
+
+void
+putDebugChar(const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ if (c == '\n')
+ putDebugChar ('\r');
+
+ up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
+
+ tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
+
+ /* Wait for last character to go. */
+ buf = (char *)tbdf->cbd_bufaddr;
+ while (tbdf->cbd_sc & BD_SC_READY)
+ ;
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+putDebugStr (const char *s)
+{
+ while (*s) {
+ putDebugChar (*s++);
+ }
+}
+
+int
+getDebugChar(void)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ unsigned char c;
+
+ up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
+
+ rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
+
+ /* Wait for character to show up. */
+ buf = (unsigned char *)rbdf->cbd_bufaddr;
+ while (rbdf->cbd_sc & BD_SC_EMPTY)
+ ;
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return(c);
+}
+
+void
+kgdb_interruptible(int yes)
+{
+ return;
+}
+
+#endif /* CONFIG_KGDB_ON_SMC */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
+extern unsigned long board_get_cpu_clk_f (void);
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+
+/* Bus-to-Core Multiplier */
+#define _1x 2
+#define _1_5x 3
+#define _2x 4
+#define _2_5x 5
+#define _3x 6
+#define _3_5x 7
+#define _4x 8
+#define _4_5x 9
+#define _5x 10
+#define _5_5x 11
+#define _6x 12
+#define _6_5x 13
+#define _7x 14
+#define _7_5x 15
+#define _8x 16
+#define _byp -1
+#define _off -2
+#define _unk -3
+
+typedef struct {
+ int b2c_mult;
+ int vco_div;
+ char *freq_60x;
+ char *freq_core;
+} corecnf_t;
+
+/*
+ * this table based on "Errata to MPC8260 PowerQUICC II User's Manual",
+ * Rev. 1, 8/2000, page 10.
+ */
+corecnf_t corecnf_tab[] = {
+ { _1_5x, 4, " 33-100", " 33-100" }, /* 0x00 */
+ { _1x, 4, " 50-150", " 50-150" }, /* 0x01 */
+ { _1x, 8, " 25-75 ", " 25-75 " }, /* 0x02 */
+ { _byp, -1, " ?-? ", " ?-? " }, /* 0x03 */
+ { _2x, 2, " 50-150", "100-300" }, /* 0x04 */
+ { _2x, 4, " 25-75 ", " 50-150" }, /* 0x05 */
+ { _2_5x, 2, " 40-120", "100-240" }, /* 0x06 */
+ { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x07 */
+ { _3x, 2, " 33-100", "100-300" }, /* 0x08 */
+ { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x09 */
+ { _4x, 2, " 25-75 ", "100-300" }, /* 0x0A */
+ { _5x, 2, " 20-60 ", "100-300" }, /* 0x0B */
+ { _1_5x, 8, " 16-50 ", " 16-50 " }, /* 0x0C */
+ { _6x, 2, " 16-50 ", "100-300" }, /* 0x0D */
+ { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x0E */
+ { _off, -1, " ?-? ", " ?-? " }, /* 0x0F */
+ { _3x, 4, " 16-50 ", " 50-150" }, /* 0x10 */
+ { _2_5x, 4, " 20-60 ", " 50-120" }, /* 0x11 */
+ { _6_5x, 2, " 15-46 ", "100-300" }, /* 0x12 */
+ { _byp, -1, " ?-? ", " ?-? " }, /* 0x13 */
+ { _7x, 2, " 14-43 ", "100-300" }, /* 0x14 */
+ { _2x, 4, " 25-75 ", " 50-150" }, /* 0x15 */
+ { _7_5x, 2, " 13-40 ", "100-300" }, /* 0x16 */
+ { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x17 */
+ { _unk, -1, " ?-? ", " ?-? " }, /* 0x18 */
+ { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x19 */
+ { _4x, 2, " 25-75 ", "100-300" }, /* 0x1A */
+ { _5x, 2, " 20-60 ", "100-300" }, /* 0x1B */
+ { _8x, 2, " 12-38 ", "100-300" }, /* 0x1C */
+ { _6x, 2, " 16-50 ", "100-300" }, /* 0x1D */
+ { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x1E */
+ { _off, -1, " ?-? ", " ?-? " }, /* 0x1F */
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ *
+ */
+
+int get_clocks (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ ulong clkin;
+ ulong sccr, dfbrg;
+ ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
+ corecnf_t *cp;
+
+#if !defined(CONFIG_8260_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_8260_CLKIN
+#else
+#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
+ clkin = board_get_cpu_clk_f ();
+#else
+ clkin = CONFIG_8260_CLKIN;
+#endif
+#endif
+
+ sccr = immap->im_clkrst.car_sccr;
+ dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
+
+ scmr = immap->im_clkrst.car_scmr;
+ corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
+ cp = &corecnf_tab[corecnf];
+
+ busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+ cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
+
+ /* HiP7, HiP7 Rev01, HiP7 RevA */
+ if ((get_pvr () == PVR_8260_HIP7) ||
+ (get_pvr () == PVR_8260_HIP7R1) ||
+ (get_pvr () == PVR_8260_HIP7RA)) {
+ pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
+ gd->vco_out = clkin * (pllmf + 1);
+ } else { /* HiP3, HiP4 */
+ pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+ plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+ gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ }
+#if 0
+ if (gd->vco_out / (busdf + 1) != clkin) {
+ /* aaarrrggghhh!!! */
+ return (1);
+ }
+#endif
+
+ gd->cpm_clk = gd->vco_out / 2;
+ gd->bus_clk = clkin;
+ gd->scc_clk = gd->vco_out / 4;
+ gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+
+ if (cp->b2c_mult > 0) {
+ gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
+ } else {
+ gd->cpu_clk = clkin;
+ }
+
+#ifdef CONFIG_PCI
+ gd->pci_clk = clkin;
+
+ if (sccr & SCCR_PCI_MODE) {
+ uint pci_div;
+ uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
+
+ if (sccr & SCCR_PCI_MODCK) {
+ pci_div = 2;
+ if (pcidf == 9) {
+ pci_div *= 5;
+ } else if (pcidf == 0xB) {
+ pci_div *= 6;
+ } else {
+ pci_div *= (pcidf + 1);
+ }
+ } else {
+ pci_div = pcidf + 1;
+ }
+
+ gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
+ }
+#endif
+
+ return (0);
+}
+
+int prt_8260_clks (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ ulong sccr, dfbrg;
+ ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
+ corecnf_t *cp;
+
+ sccr = immap->im_clkrst.car_sccr;
+ dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
+
+ scmr = immap->im_clkrst.car_scmr;
+ corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
+ busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+ cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
+ plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+ pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+ pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
+
+ cp = &corecnf_tab[corecnf];
+
+ puts (CPU_ID_STR " Clock Configuration\n - Bus-to-Core Mult ");
+
+ switch (cp->b2c_mult) {
+ case _byp:
+ puts ("BYPASS");
+ break;
+
+ case _off:
+ puts ("OFF");
+ break;
+
+ case _unk:
+ puts ("UNKNOWN");
+ break;
+
+ default:
+ printf ("%d%sx",
+ cp->b2c_mult / 2,
+ (cp->b2c_mult % 2) ? ".5" : "");
+ break;
+ }
+
+ printf (", VCO Div %d, 60x Bus Freq %s, Core Freq %s\n",
+ cp->vco_div, cp->freq_60x, cp->freq_core);
+
+ printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, "
+ "plldf %ld, pllmf %ld, pcidf %ld\n",
+ dfbrg, corecnf, busdf, cpmdf,
+ plldf, pllmf, pcidf);
+
+ printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
+ gd->vco_out, gd->scc_clk, gd->brg_clk);
+
+ printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
+ gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
+#ifdef CONFIG_PCI
+ printf (" - pci_clk %10ld\n", gd->pci_clk);
+#endif
+ putc ('\n');
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*-----------------------------------------------------------------------
+ * Timer value for timer 2, ICLK = 10
+ *
+ * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
+ * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
+ *
+ * SPEED_FCOUNT2 timer 2 counting frequency
+ * GCLK CPU clock
+ * SPEED_TMR2_PS prescaler
+ */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+
+/*-----------------------------------------------------------------------
+ * Timer value for PIT
+ *
+ * PIT_TIME = SPEED_PITC / PITRTCLK
+ * PITRTCLK = 8192
+ */
+#define SPEED_PITC (82 << 16) /* start counting from 82 */
+
+/*
+ * The new value for PTA is calculated from
+ *
+ * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock !)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ * DFBRG For normal mode (no clock reduction) always 0
+ * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
+ * NCS Number of SDRAM banks (chip selects) on this UPM.
+ */
--- /dev/null
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ * <nboppuri@trinetcommunication.com>,
+ * <pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8260 CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ */
+
+#include <common.h>
+#include <asm/cpm_8260.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if defined(CONFIG_SPI)
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef DEBUG
+
+#define SPI_EEPROM_WREN 0x06
+#define SPI_EEPROM_RDSR 0x05
+#define SPI_EEPROM_READ 0x03
+#define SPI_EEPROM_WRITE 0x02
+
+/* ---------------------------------------------------------------
+ * Offset for initial SPI buffers in DPRAM:
+ * We need a 520 byte scratch DPRAM area to use at an early stage.
+ * It is used between the two initialization calls (spi_init_f()
+ * and spi_init_r()).
+ * The value 0x2000 makes it far enough from the start of the data
+ * area (as well as from the stack pointer).
+ * --------------------------------------------------------------- */
+#ifndef CONFIG_SYS_SPI_INIT_OFFSET
+#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000
+#endif
+
+#define CPM_SPI_BASE 0x100
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+
+#endif /* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+#define MAX_BUFFER 0x104
+
+/* ----------------------------------------------------------------------
+ * Initially we place the RX and TX buffers at a fixed location in DPRAM!
+ * ---------------------------------------------------------------------- */
+static uchar *rxbuf =
+ (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
+ [CONFIG_SYS_SPI_INIT_OFFSET];
+static uchar *txbuf =
+ (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
+ [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_f (void)
+{
+ unsigned int dpaddr;
+
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cpm8260_t *cp;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cp = (cpm8260_t *) &immr->im_cpm;
+
+ *(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
+ spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
+
+/* 1 */
+ /* ------------------------------------------------
+ * Initialize Port D SPI pins
+ * (we are only in Master Mode !)
+ * ------------------------------------------------ */
+
+ /* --------------------------------------------
+ * GPIO or per. Function
+ * PPARD[16] = 1 [0x00008000] (SPIMISO)
+ * PPARD[17] = 1 [0x00004000] (SPIMOSI)
+ * PPARD[18] = 1 [0x00002000] (SPICLK)
+ * PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM)
+ * -------------------------------------------- */
+ immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */
+ immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */
+
+ /* ----------------------------------------------
+ * In/Out or per. Function 0/1
+ * PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO
+ * PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI
+ * PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK
+ * PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM
+ * ---------------------------------------------- */
+ immr->im_ioport.iop_pdird &= ~0x0000E000;
+ immr->im_ioport.iop_pdird |= 0x00080000;
+
+ /* ----------------------------------------------
+ * special option reg.
+ * PSORD[16] = 1 [0x00008000] -> SPIMISO
+ * PSORD[17] = 1 [0x00004000] -> SPIMOSI
+ * PSORD[18] = 1 [0x00002000] -> SPICLK
+ * ---------------------------------------------- */
+ immr->im_ioport.iop_psord |= 0x0000E000;
+
+ /* Initialize the parameter ram.
+ * We need to make sure many things are initialized to zero
+ */
+ spi->spi_rstate = 0;
+ spi->spi_rdp = 0;
+ spi->spi_rbptr = 0;
+ spi->spi_rbc = 0;
+ spi->spi_rxtmp = 0;
+ spi->spi_tstate = 0;
+ spi->spi_tdp = 0;
+ spi->spi_tbptr = 0;
+ spi->spi_tbc = 0;
+ spi->spi_txtmp = 0;
+
+ /* Allocate space for one transmit and one receive buffer
+ * descriptor in the DP ram
+ */
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ dpaddr = m8260_cpm_dpalloc (sizeof(cbd_t)*2, 8);
+#else
+ dpaddr = CPM_SPI_BASE;
+#endif
+
+/* 3 */
+ /* Set up the SPI parameters in the parameter ram */
+ spi->spi_rbase = dpaddr;
+ spi->spi_tbase = dpaddr + sizeof (cbd_t);
+
+ /***********IMPORTANT******************/
+
+ /*
+ * Setting transmit and receive buffer descriptor pointers
+ * initially to rbase and tbase. Only the microcode patches
+ * documentation talks about initializing this pointer. This
+ * is missing from the sample I2C driver. If you dont
+ * initialize these pointers, the kernel hangs.
+ */
+ spi->spi_rbptr = spi->spi_rbase;
+ spi->spi_tbptr = spi->spi_tbase;
+
+/* 4 */
+ /* Init SPI Tx + Rx Parameters */
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+
+/* 6 */
+ /* Set to big endian. */
+ spi->spi_tfcr = CPMFCR_EB;
+ spi->spi_rfcr = CPMFCR_EB;
+
+/* 7 */
+ /* Set maximum receive size. */
+ spi->spi_mrblr = MAX_BUFFER;
+
+/* 8 + 9 */
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
+ rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
+
+ tbdf->cbd_sc &= ~BD_SC_READY;
+ rbdf->cbd_sc &= ~BD_SC_EMPTY;
+
+ /* Set the bd's rx and tx buffer address pointers */
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+/* 10 + 11 */
+ immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
+ immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
+
+
+ return;
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ *
+ * Description: Init SPI-Controller (RAM part) -
+ * The malloc engine is ready and we can move our buffers to
+ * normal RAM
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cpm8260_t *cp;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cp = (cpm8260_t *) &immr->im_cpm;
+
+ spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
+
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
+ rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
+
+ /* Allocate memory for RX and TX buffers */
+ rxbuf = (uchar *) malloc (MAX_BUFFER);
+ txbuf = (uchar *) malloc (MAX_BUFFER);
+
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+ return;
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ *txbuf = SPI_EEPROM_WREN; /* write enable */
+ spi_xfer(1);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
+ memcpy(alen + txbuf, buffer, len);
+ spi_xfer(alen + len);
+ /* ignore received data */
+ for (i = 0; i < 1000; i++) {
+ *txbuf = SPI_EEPROM_RDSR; /* read status */
+ txbuf[1] = 0;
+ spi_xfer(2);
+ if (!(rxbuf[1] & 1)) {
+ break;
+ }
+ udelay(1000);
+ }
+ if (i >= 1000) {
+ printf ("*** spi_write: Time out while writing!\n");
+ }
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_READ; /* READ memory array */
+
+ /*
+ * There is a bug in 860T (?) that cuts the last byte of input
+ * if we're reading into DPRAM. The solution we choose here is
+ * to always read len+1 bytes (we have one extra byte at the
+ * end of the buffer).
+ */
+ spi_xfer(alen + len + 1);
+ memcpy(buffer, alen + rxbuf, len);
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+ volatile immap_t *immr;
+ volatile cpm8260_t *cp;
+ volatile spi_t *spi;
+ cbd_t *tbdf, *rbdf;
+ int tm;
+
+ DPRINT (("*** spi_xfer entered ***\n"));
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cp = (cpm8260_t *) &immr->im_cpm;
+
+ spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
+
+ tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
+ rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
+
+ /* Board-specific: Set CS for device (ATC EEPROM) */
+ immr->im_ioport.iop_pdatd &= ~0x00080000;
+
+ /* Setting tx bd status and data length */
+ tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
+ tbdf->cbd_datlen = count;
+
+ DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
+ tbdf->cbd_datlen));
+
+ /* Setting rx bd status and data length */
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ rbdf->cbd_datlen = 0; /* rx length has no significance */
+
+ immr->im_spi.spi_spmode = SPMODE_REV |
+ SPMODE_MSTR |
+ SPMODE_EN |
+ SPMODE_LEN(8) | /* 8 Bits per char */
+ SPMODE_PM(0x8) ; /* medium speed */
+ immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
+ immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
+
+ /* start spi transfer */
+ DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+ immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * -------------------------------- */
+ for (tm=0; tm<1000; ++tm) {
+ if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */
+ DPRINT (("*** spi_xfer: Tx buffer empty\n"));
+ break;
+ }
+ if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
+ DPRINT (("*** spi_xfer: Tx BD done\n"));
+ break;
+ }
+ udelay (1000);
+ }
+ if (tm >= 1000) {
+ printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+ }
+ DPRINT (("*** spi_xfer: ... transfer ended\n"));
+
+#ifdef DEBUG
+ printf ("\nspi_xfer: txbuf after xfer\n");
+ memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
+ printf ("spi_xfer: rxbuf after xfer\n");
+ memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
+ printf ("\n");
+#endif
+
+ /* Clear CS for device */
+ immr->im_ioport.iop_pdatd |= 0x00080000;
+
+ return count;
+}
+#endif /* CONFIG_SPI */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards
+ */
+#include <config.h>
+#include <mpc8260.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_8260 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+/* Floating Point enable, Machine Check and Recoverable Interr. */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+#if defined(CONFIG_HYMOD)
+ GOT_ENTRY(environment)
+#endif
+ END_GOT
+
+/*
+ * Version string - must be in data segment because MPC8260 uses the first
+ * 256 bytes for the Hard Reset Configuration Word table (see below).
+ * Similarly, can't have the U-Boot Magic Number as the first thing in
+ * the image - don't know how this will affect the image tools, but I guess
+ * I'll find out soon
+ */
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+/*
+ * Hard Reset Configuration Word (HRCW) table
+ *
+ * The Hard Reset Configuration Word (HRCW) sets a number of useful things
+ * such as whether there is an external memory controller, whether the
+ * PowerPC core is disabled (i.e. only the communications processor is
+ * active, accessed by another CPU on the bus), whether using external
+ * arbitration, external bus mode, boot port size, core initial prefix,
+ * internal space base, boot memory space, etc.
+ *
+ * These things dictate where the processor begins execution, where the
+ * boot ROM appears in memory, the memory controller setup when access
+ * boot ROM, etc. The HRCW is *extremely* important.
+ *
+ * The HRCW is read from the bus during reset. One CPU on the bus will
+ * be a hard reset configuration master, any others will be hard reset
+ * configuration slaves. The master reads eight HRCWs from flash during
+ * reset - the first it uses for itself, the other 7 it communicates to
+ * up to 7 configuration slaves by some complicated mechanism, which is
+ * not really important here.
+ *
+ * The configuration master performs 32 successive reads starting at address
+ * 0 and incrementing by 8 each read (i.e. on 64 bit boundaries) but only 8
+ * bits is read, and always from byte lane D[0-7] (so that port size of the
+ * boot device does not matter). The first four reads form the 32 bit HRCW
+ * for the master itself. The second four reads form the HRCW for the first
+ * slave, and so on, up to seven slaves. The 32 bit HRCW is formed by
+ * concatenating the four bytes, with the first read placed in byte 0 (the
+ * most significant byte), and so on with the fourth read placed in byte 3
+ * (the least significant byte).
+ */
+#define _HRCW_TABLE_ENTRY(w) \
+ .fill 8,1,(((w)>>24)&0xff); \
+ .fill 8,1,(((w)>>16)&0xff); \
+ .fill 8,1,(((w)>> 8)&0xff); \
+ .fill 8,1,(((w) )&0xff)
+ .text
+ .globl _hrcw_table
+_hrcw_table:
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7)
+/*
+ * After configuration, a system reset exception is executed using the
+ * vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP]
+ * is 0, the base address is 0x00000000. If MSR[IP] is 1, the base address
+ * is 0xfff00000. In the case of a Power On Reset or Hard Reset, the value
+ * of MSR[IP] is determined by the CIP field in the HRCW.
+ *
+ * Other bits in the HRCW set up the Base Address and Port Size in BR0.
+ * This determines the location of the boot ROM (flash or EPROM) in the
+ * processor's address space at boot time. As long as the HRCW is set up
+ * so that we eventually end up executing the code below when the processor
+ * executes the reset exception, the actual values used should not matter.
+ *
+ * Once we have got here, the address mask in OR0 is cleared so that the
+ * bottom 32K of the boot ROM is effectively repeated all throughout the
+ * processor's address space, after which we can jump to the absolute
+ * address at which the boot ROM was linked at compile time, and proceed
+ * to initialise the memory controller without worrying if the rug will be
+ * pulled out from under us, so to speak (it will be fine as long as we
+ * configure BR0 with the same boot ROM link address).
+ */
+ . = EXC_OFF_SYS_RESET
+
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
+ lis r3, CONFIG_SYS_DEFAULT_IMMR@h
+ nop
+ lwz r4, 0(r3)
+ nop
+ rlwinm r4, r4, 0, 8, 5
+ nop
+ oris r4, r4, 0x0200
+ nop
+ stw r4, 0(r3)
+ nop
+#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
+boot_warm:
+ mfmsr r5 /* save msr contents */
+
+#if defined(CONFIG_COGENT)
+ /* this is what the cogent EPROM does */
+ li r0, 0
+ mtmsr r0
+ isync
+ bl cogent_init_8260
+#endif /* CONFIG_COGENT */
+
+#if defined(CONFIG_SYS_DEFAULT_IMMR)
+ lis r3, CONFIG_SYS_IMMR@h
+ ori r3, r3, CONFIG_SYS_IMMR@l
+ lis r4, CONFIG_SYS_DEFAULT_IMMR@h
+ stw r3, 0x1A8(r4)
+#endif /* CONFIG_SYS_DEFAULT_IMMR */
+
+ /* Initialise the MPC8260 processor core */
+ /*--------------------------------------------------------------*/
+
+ bl init_8260_core
+
+#ifndef CONFIG_SYS_RAMBOOT
+ /* When booting from ROM (Flash or EPROM), clear the */
+ /* Address Mask in OR0 so ROM appears everywhere */
+ /*--------------------------------------------------------------*/
+
+ lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
+ lwz r4, IM_OR0@l(r3)
+ li r5, 0x7fff
+ and r4, r4, r5
+ stw r4, IM_OR0@l(r3)
+
+ /* Calculate absolute address in FLASH and jump there */
+ /*--------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+#endif /* CONFIG_SYS_RAMBOOT */
+
+ /* initialize some things that are hard to access from C */
+ /*--------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_IMMR@h /* set up stack in internal DPRAM */
+ ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*--------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (in Flash)*/
+
+#ifdef DEBUG
+ bl init_debug /* set up debugging stuff */
+#endif
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+#if defined(CONFIG_COGENT)
+
+/*
+ * This code initialises the MPC8260 processor core
+ * (conforms to PowerPC 603e spec)
+ */
+
+ .globl cogent_init_8260
+cogent_init_8260:
+
+ /* Taken from page 14 of CMA282 manual */
+ /*--------------------------------------------------------------*/
+
+ lis r4, (CONFIG_SYS_IMMR+IM_REGBASE)@h
+ lis r3, CONFIG_SYS_IMMR@h
+ stw r3, IM_IMMR@l(r4)
+ lwz r3, IM_IMMR@l(r4)
+ stw r3, 0(r0)
+ lis r3, CONFIG_SYS_SYPCR@h
+ ori r3, r3, CONFIG_SYS_SYPCR@l
+ stw r3, IM_SYPCR@l(r4)
+ lwz r3, IM_SYPCR@l(r4)
+ stw r3, 4(r0)
+ lis r3, CONFIG_SYS_SCCR@h
+ ori r3, r3, CONFIG_SYS_SCCR@l
+ stw r3, IM_SCCR@l(r4)
+ lwz r3, IM_SCCR@l(r4)
+ stw r3, 8(r0)
+
+ /* the rest of this was disassembled from the */
+ /* EPROM code that came with my CMA282 CPU module */
+ /*--------------------------------------------------------------*/
+
+ lis r1, 0x1234
+ ori r1, r1, 0x5678
+ stw r1, 0x20(r0)
+ lwz r1, 0x20(r0)
+ stw r1, 0x24(r0)
+ lwz r1, 0x24(r0)
+ lis r3, 0x0e80
+ ori r3, r3, 0
+ stw r1, 4(r3)
+ lwz r1, 4(r3)
+
+ /* Done! */
+ /*--------------------------------------------------------------*/
+
+ blr
+
+#endif /* CONFIG_COGENT */
+
+/*
+ * This code initialises the MPC8260 processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+
+ .globl init_8260_core
+init_8260_core:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*--------------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ /* Initialise the SYPCR early, and reset the watchdog (if req) */
+ /*--------------------------------------------------------------*/
+
+ lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
+#if !defined(CONFIG_COGENT)
+ lis r4, CONFIG_SYS_SYPCR@h
+ ori r4, r4, CONFIG_SYS_SYPCR@l
+ stw r4, IM_SYPCR@l(r3)
+#endif /* !CONFIG_COGENT */
+#if defined(CONFIG_WATCHDOG)
+ li r4, 21868 /* = 0x556c */
+ sth r4, IM_SWSR@l(r3)
+ li r4, -21959 /* = 0xaa39 */
+ sth r4, IM_SWSR@l(r3)
+#endif /* CONFIG_WATCHDOG */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*--------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_HID0_INIT@h
+ ori r3, r3, CONFIG_SYS_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID0_FINAL@h
+ ori r3, r3, CONFIG_SYS_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID2@h
+ ori r3, r3, CONFIG_SYS_HID2@l
+ mtspr HID2, r3
+
+ /* clear all BAT's */
+ /*--------------------------------------------------------------*/
+
+ li r0, 0
+ mtspr DBAT0U, r0
+ mtspr DBAT0L, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT1L, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT2L, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT3L, r0
+ mtspr IBAT0U, r0
+ mtspr IBAT0L, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT1L, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT2L, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT3L, r0
+ SYNC
+
+ /* invalidate all tlb's */
+ /* */
+ /* From the 603e User Manual: "The 603e provides the ability to */
+ /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
+ /* instruction invalidates the TLB entry indexed by the EA, and */
+ /* operates on both the instruction and data TLBs simultaneously*/
+ /* invalidating four TLB entries (both sets in each TLB). The */
+ /* index corresponds to bits 15-19 of the EA. To invalidate all */
+ /* entries within both TLBs, 32 tlbie instructions should be */
+ /* issued, incrementing this field by one each time." */
+ /* */
+ /* "Note that the tlbia instruction is not implemented on the */
+ /* 603e." */
+ /* */
+ /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
+ /* incrementing by 0x1000 each time. The code below is sort of */
+ /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
+ /* */
+ /*--------------------------------------------------------------*/
+
+ li r3, 32
+ mtctr r3
+ li r3, 0
+1: tlbie r3
+ addi r3, r3, 0x1000
+ bdnz 1b
+ SYNC
+
+ /* Done! */
+ /*--------------------------------------------------------------*/
+
+ blr
+
+#ifdef DEBUG
+
+/*
+ * initialise things related to debugging.
+ *
+ * must be called after the global offset table (GOT) is initialised
+ * (GET_GOT) and after cpu_init_f() has executed.
+ */
+
+ .globl init_debug
+init_debug:
+
+ lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
+
+ /* Quick and dirty hack to enable the RAM and copy the */
+ /* vectors so that we can take exceptions. */
+ /*--------------------------------------------------------------*/
+ /* write Memory Refresh Prescaler */
+ li r4, CONFIG_SYS_MPTPR
+ sth r4, IM_MPTPR@l(r3)
+ /* write 60x Refresh Timer */
+ li r4, CONFIG_SYS_PSRT
+ stb r4, IM_PSRT@l(r3)
+ /* init the 60x SDRAM Mode Register */
+ lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h
+ ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l
+ stw r4, IM_PSDMR@l(r3)
+ /* write Precharge All Banks command */
+ lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h
+ ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l
+ stw r4, IM_PSDMR@l(r3)
+ stb r0, 0(0)
+ /* write eight CBR Refresh commands */
+ lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h
+ ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l
+ stw r4, IM_PSDMR@l(r3)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ stb r0, 0(0)
+ /* write Mode Register Write command */
+ lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h
+ ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l
+ stw r4, IM_PSDMR@l(r3)
+ stb r0, 0(0)
+ /* write Normal Operation command and enable Refresh */
+ lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
+ ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
+ stw r4, IM_PSDMR@l(r3)
+ stb r0, 0(0)
+ /* RAM should now be operational */
+
+#define VEC_WRD_CNT ((_end_of_vectors - _start + EXC_OFF_SYS_RESET) / 4)
+ mflr r3
+ GET_GOT
+ mtlr r3
+ lwz r3, GOT(_end_of_vectors)
+ rlwinm r4, r3, 0, 18, 31 /* _end_of_vectors & 0x3FFF */
+ lis r5, VEC_WRD_CNT@h
+ ori r5, r5, VEC_WRD_CNT@l
+ mtctr r5
+1:
+ lwzu r5, -4(r3)
+ stwu r5, -4(r4)
+ bdnz 1b
+
+ /* Load the Instruction Address Breakpoint Register (IABR). */
+ /* */
+ /* The address to load is stored in the first word of dual port */
+ /* ram and should be preserved while the power is on, so you */
+ /* can plug addresses into that location then reset the cpu and */
+ /* this code will load that address into the IABR after the */
+ /* reset. */
+ /* */
+ /* When the program counter matches the contents of the IABR, */
+ /* an exception is generated (before the instruction at that */
+ /* location completes). The vector for this exception is 0x1300 */
+ /*--------------------------------------------------------------*/
+ lis r3, CONFIG_SYS_IMMR@h
+ lwz r3, 0(r3)
+ mtspr IABR, r3
+
+ /* Set the entire dual port RAM (where the initial stack */
+ /* resides) to a known value - makes it easier to see where */
+ /* the stack has been written */
+ /*--------------------------------------------------------------*/
+ lis r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h
+ ori r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l
+ li r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4)
+ mtctr r4
+ lis r4, 0xdeadbeaf@h
+ ori r4, r4, 0xdeadbeaf@l
+1:
+ stwu r4, -4(r3)
+ bdnz 1b
+
+ /* Done! */
+ /*--------------------------------------------------------------*/
+
+ blr
+#endif
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ lis r4, 0
+ ori r4, r4, HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_DCE
+ lis r4, 0
+ ori r4, r4, HID0_DLOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_DCI
+ sync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_DCE|HID0_DLOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_DCI
+ sync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
+ rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 9f
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
+ rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
+ cmpwi r7,0
+ beq 7f
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+#if defined(CONFIG_HYMOD)
+ /*
+ * For HYMOD - the environment is the very last item in flash.
+ * The real .bss stops just before environment starts, so only
+ * clear up to that point.
+ *
+ * taken from mods for FADS board
+ */
+ lwz r4,GOT(environment)
+#else
+ lwz r4,GOT(_end)
+#endif
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+#include <asm/m8260_pci.h>
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ puts ("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ putc ('\n');
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ putc ('\n');
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ putc ('\n');
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ putc ('\n');
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+#ifdef CONFIG_PCI
+void dump_pci (void)
+{
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ printf ("PCI: err status %x err mask %x err ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_esr),
+ le32_to_cpu (immap->im_pci.pci_emr),
+ le32_to_cpu (immap->im_pci.pci_ecr));
+ printf (" error address %x error data %x ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_eacr),
+ le32_to_cpu (immap->im_pci.pci_edcr),
+ le32_to_cpu (immap->im_pci.pci_eccr));
+
+}
+#endif
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+#ifdef CONFIG_PCI
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+#ifdef DEBUG
+ dump_pci();
+#endif
+ /* clear the error in the error status register */
+ if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+ immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
+ return;
+ }
+#endif
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ puts ("Machine check in kernel mode.\n"
+ "Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ puts ("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ puts ("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ puts ("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ puts ("Address parity signal\n");
+ break;
+ default:
+ puts ("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+#ifdef CONFIG_PCI
+ dump_pci();
+#endif
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2001-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+
+COBJS-y += traps.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += speed.o
+COBJS-y += interrupts.o
+COBJS-y += spd_sdram.o
+COBJS-y += ecc.o
+COBJS-$(CONFIG_QE) += qe_io.o
+COBJS-$(CONFIG_FSL_SERDES) += serdes.o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS-$(CONFIG_PCIE) += pcie.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+COBJS := $(COBJS-y)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
+ -ffixed-r2 -msoft-float
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc83xx/u-boot.lds
--- /dev/null
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC83xx family.
+ *
+ * Derived from the MPC8260 and MPC85xx.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc83xx.h>
+#include <asm/processor.h>
+#include <libfdt.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+#include <asm/immap_qe.h>
+#include <asm/io.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu(void)
+{
+ volatile immap_t *immr;
+ ulong clock = gd->cpu_clk;
+ u32 pvr = get_pvr();
+ u32 spridr;
+ char buf[32];
+ int i;
+
+ const struct cpu_type {
+ char name[15];
+ u32 partid;
+ } cpu_type_list [] = {
+ CPU_TYPE_ENTRY(8311),
+ CPU_TYPE_ENTRY(8313),
+ CPU_TYPE_ENTRY(8314),
+ CPU_TYPE_ENTRY(8315),
+ CPU_TYPE_ENTRY(8321),
+ CPU_TYPE_ENTRY(8323),
+ CPU_TYPE_ENTRY(8343),
+ CPU_TYPE_ENTRY(8347_TBGA_),
+ CPU_TYPE_ENTRY(8347_PBGA_),
+ CPU_TYPE_ENTRY(8349),
+ CPU_TYPE_ENTRY(8358_TBGA_),
+ CPU_TYPE_ENTRY(8358_PBGA_),
+ CPU_TYPE_ENTRY(8360),
+ CPU_TYPE_ENTRY(8377),
+ CPU_TYPE_ENTRY(8378),
+ CPU_TYPE_ENTRY(8379),
+ };
+
+ immr = (immap_t *)CONFIG_SYS_IMMR;
+
+ puts("CPU: ");
+
+ switch (pvr & 0xffff0000) {
+ case PVR_E300C1:
+ printf("e300c1, ");
+ break;
+
+ case PVR_E300C2:
+ printf("e300c2, ");
+ break;
+
+ case PVR_E300C3:
+ printf("e300c3, ");
+ break;
+
+ case PVR_E300C4:
+ printf("e300c4, ");
+ break;
+
+ default:
+ printf("Unknown core, ");
+ }
+
+ spridr = immr->sysconf.spridr;
+
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+ if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
+ puts("MPC");
+ puts(cpu_type_list[i].name);
+ if (IS_E_PROCESSOR(spridr))
+ puts("E");
+ if (REVID_MAJOR(spridr) >= 2)
+ puts("A");
+ printf(", Rev: %d.%d", REVID_MAJOR(spridr),
+ REVID_MINOR(spridr));
+ break;
+ }
+
+ if (i == ARRAY_SIZE(cpu_type_list))
+ printf("(SPRIDR %08x unknown), ", spridr);
+
+ printf(" at %s MHz, ", strmhz(buf, clock));
+
+ printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
+
+ return 0;
+}
+
+
+/*
+ * Program a UPM with the code supplied in the table.
+ *
+ * The 'dummy' variable is used to increment the MAD. 'dummy' is
+ * supposed to be a pointer to the memory of the device being
+ * programmed by the UPM. The data in the MDR is written into
+ * memory and the MAD is incremented every time there's a write
+ * to 'dummy'. Unfortunately, the current prototype for this
+ * function doesn't allow for passing the address of this
+ * device, and changing the prototype will break a number lots
+ * of other code, so we need to use a round-about way of finding
+ * the value for 'dummy'.
+ *
+ * The value can be extracted from the base address bits of the
+ * Base Register (BR) associated with the specific UPM. To find
+ * that BR, we need to scan all 8 BRs until we find the one that
+ * has its MSEL bits matching the UPM we want. Once we know the
+ * right BR, we can extract the base address bits from it.
+ *
+ * The MxMR and the BR and OR of the chosen bank should all be
+ * configured before calling this function.
+ *
+ * Parameters:
+ * upm: 0=UPMA, 1=UPMB, 2=UPMC
+ * table: Pointer to an array of values to program
+ * size: Number of elements in the array. Must be 64 or less.
+ */
+void upmconfig (uint upm, uint *table, uint size)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile fsl_lbus_t *lbus = &immap->lbus;
+ volatile uchar *dummy = NULL;
+ const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
+ volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
+ uint i;
+
+ /* Scan all the banks to determine the base address of the device */
+ for (i = 0; i < 8; i++) {
+ if ((lbus->bank[i].br & BR_MSEL) == msel) {
+ dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+ break;
+ }
+ }
+
+ if (!dummy) {
+ printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+ hang();
+ }
+
+ /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
+ *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
+
+ for (i = 0; i < size; i++) {
+ lbus->mdr = table[i];
+ __asm__ __volatile__ ("sync");
+ *dummy = 0; /* Write the value to memory and increment MAD */
+ __asm__ __volatile__ ("sync");
+ while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
+ }
+
+ /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
+ *mxmr &= 0xCFFFFFC0;
+}
+
+
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr;
+#ifndef MPC83xx_RESET
+ ulong addr;
+#endif
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ puts("Resetting the board.\n");
+
+#ifdef MPC83xx_RESET
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~( MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /* enable Reset Control Reg */
+ immap->reset.rpr = 0x52535445;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* confirm Reset Control Reg is enabled */
+ while(!((immap->reset.rcer) & RCER_CRE));
+
+ udelay(200);
+
+ /* perform reset, only one bit */
+ immap->reset.rcr = RCR_SWHR;
+
+#else /* ! MPC83xx_RESET */
+
+ immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+ addr = CONFIG_SYS_RESET_ADDRESS;
+
+ ((void (*)(void)) addr) ();
+#endif /* MPC83xx_RESET */
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+
+unsigned long get_tbclk(void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return tbclk;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts();
+
+ /* Reset the 83xx watchdog */
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ immr->wdt.swsrr = 0x556c;
+ immr->wdt.swsrr = 0xaa39;
+
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_UEC_ETH)
+ uec_standard_init(bis);
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+ tsec_standard_init(bis);
+#endif
+ return 0;
+}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+#if !defined(CONFIG_MPC8360)
+#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
+#endif
+
+#if !defined(CONFIG_BOOTCOUNT_ADDR)
+#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
+#endif
+
+#include <asm/io.h>
+
+void bootcount_store (ulong a)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+ out_be32 (reg, a);
+ out_be32 (reg + 4, BOOTCOUNT_MAGIC);
+}
+
+ulong bootcount_load (void)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+
+ if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return in_be32 (reg);
+}
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
--- /dev/null
+/*
+ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <ioports.h>
+#include <asm/io.h>
+#ifdef CONFIG_USB_EHCI_FSL
+#include <usb/ehci-fsl.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+ int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+ u8 port, pin;
+ int dir, open_drain, assign;
+ int i;
+
+ for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+ port = qe_iop_conf_tab[i].port;
+ pin = qe_iop_conf_tab[i].pin;
+ dir = qe_iop_conf_tab[i].dir;
+ open_drain = qe_iop_conf_tab[i].open_drain;
+ assign = qe_iop_conf_tab[i].assign;
+ qe_config_iopin(port, pin, dir, open_drain, assign);
+ }
+}
+#endif
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ __be32 acr_mask =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (ACR_PARKM << ACR_PARKM_SHIFT) |
+#endif
+ 0;
+ __be32 acr_val =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
+ (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
+ (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_mask =
+#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
+ (SPCR_OPT << SPCR_OPT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_val =
+#ifdef CONFIG_SYS_SPCR_OPT
+ (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
+#endif
+ 0;
+ __be32 sccr_mask =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (SCCR_PCICM << SCCR_PCICM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+ __be32 sccr_val =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+ __be32 lcrr_mask =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
+ LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ LCRR_CLKDIV |
+#endif
+ 0;
+ __be32 lcrr_val =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ CONFIG_SYS_LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC
+ CONFIG_SYS_LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ CONFIG_SYS_LCRR_CLKDIV |
+#endif
+ 0;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* system performance tweaking */
+ clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
+
+ clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
+
+ clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
+
+ /* RSR - Reset Status Register - clear all status (4.6.1.3) */
+ gd->reset_status = __raw_readl(&im->reset.rsr);
+ __raw_writel(~(RSR_RES), &im->reset.rsr);
+
+ /* AER - Arbiter Event Register - store status */
+ gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
+ gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
+
+ /*
+ * RMR - Reset Mode Register
+ * contains checkstop reset enable (4.6.1.4)
+ */
+ __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
+
+ /* LCRR - Clock Ratio Register (10.3.1.16)
+ * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
+ */
+ clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
+ __raw_readl(&im->lbus.lcrr);
+ isync();
+
+ /* Enable Time Base & Decrementer ( so we will have udelay() )*/
+ setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
+
+ /* System General Purpose Register */
+#ifdef CONFIG_SYS_SICRH
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
+ /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
+ __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
+ &im->sysconf.sicrh);
+#else
+ __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
+#endif
+#endif
+#ifdef CONFIG_SYS_SICRL
+ __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
+#endif
+#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
+ __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
+#endif
+#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
+ __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
+#endif
+
+#ifdef CONFIG_QE
+ /* Config QE ioports */
+ config_qe_ioports();
+#endif
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CONFIG_SYS_BR0_PRELIM) \
+ && defined(CONFIG_SYS_OR0_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
+ im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
+ im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
+ im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
+ im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
+#else
+#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
+#endif
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
+ im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
+ im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
+ im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
+ im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
+ im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
+ im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
+ im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
+ im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
+ im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
+ im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
+ im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
+ im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
+ im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
+ im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
+ im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
+ im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
+ im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
+ im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
+#endif
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
+ im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
+#endif
+#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
+ im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
+ im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
+#endif
+#ifdef CONFIG_SYS_GPIO1_PRELIM
+ im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
+ im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
+#endif
+#ifdef CONFIG_SYS_GPIO2_PRELIM
+ im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
+ im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
+#endif
+#ifdef CONFIG_USB_EHCI_FSL
+#ifndef CONFIG_MPC834x
+ uint32_t temp;
+ struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
+
+ /* Configure interface. */
+ setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
+
+ /* Wait for clock to stabilize */
+ do {
+ temp = __raw_readl(&ehci->control);
+ udelay(1000);
+ } while (!(temp & PHY_CLK_VALID));
+#endif
+#endif
+}
+
+int cpu_init_r (void)
+{
+#ifdef CONFIG_QE
+ uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
+
+ qe_init(qe_base);
+ qe_reset();
+#endif
+ return 0;
+}
+
+/*
+ * Print out the bus arbiter event
+ */
+#if defined(CONFIG_DISPLAY_AER_FULL)
+static int print_83xx_arb_event(int force)
+{
+ static char* event[] = {
+ "Address Time Out",
+ "Data Time Out",
+ "Address Only Transfer Type",
+ "External Control Word Transfer Type",
+ "Reserved Transfer Type",
+ "Transfer Error",
+ "reserved",
+ "reserved"
+ };
+ static char* master[] = {
+ "e300 Core Data Transaction",
+ "reserved",
+ "e300 Core Instruction Fetch",
+ "reserved",
+ "TSEC1",
+ "TSEC2",
+ "USB MPH",
+ "USB DR",
+ "Encryption Core",
+ "I2C Boot Sequencer",
+ "JTAG",
+ "reserved",
+ "eSDHC",
+ "PCI1",
+ "PCI2",
+ "DMA",
+ "QUICC Engine 00",
+ "QUICC Engine 01",
+ "QUICC Engine 10",
+ "QUICC Engine 11",
+ "reserved",
+ "reserved",
+ "reserved",
+ "reserved",
+ "SATA1",
+ "SATA2",
+ "SATA3",
+ "SATA4",
+ "reserved",
+ "PCI Express 1",
+ "PCI Express 2",
+ "TDM-DMAC"
+ };
+ static char *transfer[] = {
+ "Address-only, Clean Block",
+ "Address-only, lwarx reservation set",
+ "Single-beat or Burst write",
+ "reserved",
+ "Address-only, Flush Block",
+ "reserved",
+ "Burst write",
+ "reserved",
+ "Address-only, sync",
+ "Address-only, tlbsync",
+ "Single-beat or Burst read",
+ "Single-beat or Burst read",
+ "Address-only, Kill Block",
+ "Address-only, icbi",
+ "Burst read",
+ "reserved",
+ "Address-only, eieio",
+ "reserved",
+ "Single-beat write",
+ "reserved",
+ "ecowx - Illegal single-beat write",
+ "reserved",
+ "reserved",
+ "reserved",
+ "Address-only, TLB Invalidate",
+ "reserved",
+ "Single-beat or Burst read",
+ "reserved",
+ "eciwx - Illegal single-beat read",
+ "reserved",
+ "Burst read",
+ "reserved"
+ };
+
+ int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
+ >> AEATR_EVENT_SHIFT;
+ int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
+ >> AEATR_MSTR_ID_SHIFT;
+ int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
+ >> AEATR_TBST_SHIFT;
+ int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
+ >> AEATR_TSIZE_SHIFT;
+ int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
+ >> AEATR_TTYPE_SHIFT;
+
+ if (!force && !gd->arbiter_event_address)
+ return 0;
+
+ puts("Arbiter Event Status:\n");
+ printf(" Event Address: 0x%08lX\n", gd->arbiter_event_address);
+ printf(" Event Type: 0x%1x = %s\n", etype, event[etype]);
+ printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]);
+ printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize,
+ tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
+ printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
+
+ return gd->arbiter_event_address;
+}
+
+#elif defined(CONFIG_DISPLAY_AER_BRIEF)
+
+static int print_83xx_arb_event(int force)
+{
+ if (!force && !gd->arbiter_event_address)
+ return 0;
+
+ printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
+ gd->arbiter_event_attributes, gd->arbiter_event_address);
+
+ return gd->arbiter_event_address;
+}
+#endif /* CONFIG_DISPLAY_AER_xxxx */
+
+/*
+ * Figure out the cause of the reset
+ */
+int prt_83xx_rsr(void)
+{
+ static struct {
+ ulong mask;
+ char *desc;
+ } bits[] = {
+ {
+ RSR_SWSR, "Software Soft"}, {
+ RSR_SWHR, "Software Hard"}, {
+ RSR_JSRS, "JTAG Soft"}, {
+ RSR_CSHR, "Check Stop"}, {
+ RSR_SWRS, "Software Watchdog"}, {
+ RSR_BMRS, "Bus Monitor"}, {
+ RSR_SRS, "External/Internal Soft"}, {
+ RSR_HRS, "External/Internal Hard"}
+ };
+ static int n = sizeof bits / sizeof bits[0];
+ ulong rsr = gd->reset_status;
+ int i;
+ char *sep;
+
+ puts("Reset Status:");
+
+ sep = " ";
+ for (i = 0; i < n; i++)
+ if (rsr & bits[i].mask) {
+ printf("%s%s", sep, bits[i].desc);
+ sep = ", ";
+ }
+ puts("\n");
+
+#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
+ print_83xx_arb_event(rsr & RSR_BMRS);
+#endif
+ puts("\n");
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on the contribution of Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <command.h>
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+void ecc_print_status(void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+
+ printf("\nECC mode: %s\n\n",
+ (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+ /* Interrupts */
+ printf("Memory Error Interrupt Enable:\n");
+ printf(" Multiple-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+ printf(" Single-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+ printf(" Memory Select Error Interrupt Enable: %d\n\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+ /* Error disable */
+ printf("Memory Error Disable:\n");
+ printf(" Multiple-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+ printf(" Sinle-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+ printf(" Memory Select Error Disable: %d\n\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+ /* Error injection */
+ printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
+ ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+ printf("Memory Data Path Error Injection Mask ECC:\n");
+ printf(" ECC Mirror Byte: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+ printf(" ECC Injection Enable: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+ printf(" ECC Error Injection Mask: 0x%02x\n\n",
+ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+ /* SBE counter/threshold */
+ printf("Memory Single-Bit Error Management (0..255):\n");
+ printf(" Single-Bit Error Threshold: %d\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+ printf(" Single-Bit Error Counter: %d\n\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+ /* Error detect */
+ printf("Memory Error Detect:\n");
+ printf(" Multiple Memory Errors: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+ printf(" Multiple-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+ printf(" Single-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+ printf(" Memory Select Error: %d\n\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+ /* Capture data */
+ printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
+ ddr->capture_data_hi, ddr->capture_data_lo);
+ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+ ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+ printf("Memory Error Attributes Capture:\n");
+ printf(" Data Beat Number: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+ ECC_CAPT_ATTR_BNUM_SHIFT);
+ printf(" Transaction Size: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+ ECC_CAPT_ATTR_TSIZ_SHIFT);
+ printf(" Transaction Source: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+ ECC_CAPT_ATTR_TSRC_SHIFT);
+ printf(" Transaction Type: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+ ECC_CAPT_ATTR_TTYP_SHIFT);
+ printf(" Error Information Valid: %d\n\n",
+ ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile u32 val;
+ u64 *addr;
+ u32 count;
+ register u64 *i;
+ u32 ret[2];
+ u32 pattern[2];
+ u32 writeback[2];
+
+ /* The pattern is written into memory to generate error */
+ pattern[0] = 0xfedcba98UL;
+ pattern[1] = 0x76543210UL;
+
+ /* After injecting error, re-initialize the memory with the value */
+ writeback[0] = 0x01234567UL;
+ writeback[1] = 0x89abcdefUL;
+
+ if (argc > 4) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "status") == 0) {
+ ecc_print_status();
+ return 0;
+ } else if (strcmp(argv[1], "captureclear") == 0) {
+ ddr->capture_address = 0;
+ ddr->capture_data_hi = 0;
+ ddr->capture_data_lo = 0;
+ ddr->capture_ecc = 0;
+ ddr->capture_attributes = 0;
+ return 0;
+ }
+ }
+ if (argc == 3) {
+ if (strcmp(argv[1], "sbecnt") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "sbethr") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "errdisable") == 0) {
+ val = ddr->err_disable;
+
+ if (strcmp(argv[2], "+sbe") == 0) {
+ val |= ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "+mbe") == 0) {
+ val |= ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "+mse") == 0) {
+ val |= ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "+all") == 0) {
+ val |= (ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else if (strcmp(argv[2], "-sbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "-mbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "-mse") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "-all") == 0) {
+ val &= ~(ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else {
+ printf("Incorrect err_disable field\n");
+ return 1;
+ }
+
+ ddr->err_disable = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "errdetectclr") == 0) {
+ val = ddr->err_detect;
+
+ if (strcmp(argv[2], "mme") == 0) {
+ val |= ECC_ERROR_DETECT_MME;
+ } else if (strcmp(argv[2], "sbe") == 0) {
+ val |= ECC_ERROR_DETECT_SBE;
+ } else if (strcmp(argv[2], "mbe") == 0) {
+ val |= ECC_ERROR_DETECT_MBE;
+ } else if (strcmp(argv[2], "mse") == 0) {
+ val |= ECC_ERROR_DETECT_MSE;
+ } else if (strcmp(argv[2], "all") == 0) {
+ val |= (ECC_ERROR_DETECT_MME |
+ ECC_ERROR_DETECT_MBE |
+ ECC_ERROR_DETECT_SBE |
+ ECC_ERROR_DETECT_MSE);
+ } else {
+ printf("Incorrect err_detect field\n");
+ return 1;
+ }
+
+ ddr->err_detect = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatahi") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_hi = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatalo") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_lo = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectecc") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+ if (val > 0xff) {
+ printf("Incorrect ECC inject mask, "
+ "should be 0x00..0xff\n");
+ return 1;
+ }
+ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ } else if (strcmp(argv[1], "inject") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EIEN;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EIEN;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "mirror") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EMB;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EMB;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ }
+ }
+ if (argc == 4) {
+ if (strcmp(argv[1], "testdw") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ ppcDWstore((u32 *) i, pattern);
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* read data, this generates ECC error */
+ ppcDWload((u32 *) i, ret);
+ __asm__ __volatile__("sync");
+
+ /* re-initialize memory, double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ if (strcmp(argv[1], "testword") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ *(u32 *) i = 0xfedcba98UL;
+ __asm__ __volatile__("sync");
+
+ /* sub double word write,
+ * bus will read-modify-write,
+ * generates ECC error */
+ *((u32 *) i + 1) = 0x76543210UL;
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* re-initialize memory,
+ * double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ }
+ cmd_usage(cmdtp);
+ return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+ "support for DDR ECC features",
+ "status - print out status info\n"
+ "ecc captureclear - clear capture regs data\n"
+ "ecc sbecnt <val> - set Single-Bit Error counter\n"
+ "ecc sbethr <val> - set Single-Bit Threshold\n"
+ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
+ " [-|+]sbe - Single-Bit Error\n"
+ " [-|+]mbe - Multiple-Bit Error\n"
+ " [-|+]mse - Memory Select Error\n"
+ " [-|+]all - all errors\n"
+ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+ " mme - Multiple Memory Errors\n"
+ " sbe - Single-Bit Error\n"
+ " mbe - Multiple-Bit Error\n"
+ " mse - Memory Select Error\n"
+ " all - all errors\n"
+ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
+ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
+ "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
+ "ecc inject <en|dis> - enable/disable error injection\n"
+ "ecc mirror <en|dis> - enable/disable mirror byte\n"
+ "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with double word access\n"
+ " - disables injects\n"
+ " - reads pattern back with double word access, generates error\n"
+ " - re-inits memory\n"
+ "ecc testword <addr> <cnt> - test mem region with word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with word access\n"
+ " - writes pattern with word access, generates error\n"
+ " - disables injects\n" " - re-inits memory");
+#endif
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+
+extern void ft_qe_setup(void *blob);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+
+void fdt_fixup_muram (void *blob)
+{
+ ulong data[2];
+
+ data[0] = 0;
+ data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
+ do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
+ data, sizeof (data), 0);
+}
+#endif
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ int spridr = immr->sysconf.spridr;
+
+ /*
+ * delete crypto node if not on an E-processor
+ * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
+ * EA revisions got the SEC uprevved to 2.4 but since the default device
+ * tree contains SEC 2.0 properties we uprev them here.
+ */
+ if (!IS_E_PROCESSOR(spridr))
+ fdt_fixup_crypto_node(blob, 0);
+ else if (IS_E_PROCESSOR(spridr) &&
+ (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
+ SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
+ REVID_MAJOR(spridr) >= 2)
+ fdt_fixup_crypto_node(blob, 0x0204);
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
+ defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
+ fdt_fixup_ethernet(blob);
+#ifdef CONFIG_MPC8313
+ /*
+ * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
+ * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
+ * so if on Rev. 2 (and higher) h/w, we fix them up here
+ */
+ if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
+ int nodeoffset, path;
+ const char *prop;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+ }
+ }
+#endif
+#endif
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", (bd->bi_busfreq / 4), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", gd->core_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,soc",
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,soc",
+ "clock-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,immr",
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,immr",
+ "clock-frequency", bd->bi_busfreq, 1);
+#ifdef CONFIG_QE
+ ft_qe_setup(blob);
+#endif
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+ fdt_fixup_muram (blob);
+#endif
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc83xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
+
+ /* Enable e300 time base */
+
+ immr->sysconf.spcr |= 0x00400000;
+
+ return 0;
+}
+
+
+/*
+ * Handle external interrupts
+ */
+
+void external_interrupt (struct pt_regs *regs)
+{
+}
+
+
+/*
+ * Install and free an interrupt handler.
+ */
+
+void
+irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
+{
+}
+
+
+void irq_free_handler (int irq)
+{
+}
+
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+
+#if defined(CONFIG_CMD_IRQ)
+
+/* ripped this out of ppc4xx/interrupts.c */
+
+/*
+ * irqinfo - print information about PCI devices
+ */
+
+void
+do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ int i;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ for (i = 0; i < sizeof(gd_t); i++)
+ ((char *)gd)[i] = 0;
+
+ /* system performance tweaking */
+
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
+ /* Arbiter pipeline depth */
+ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CONFIG_SYS_ACR_RPTCNT
+ /* Arbiter repeat count */
+ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#endif
+
+#ifdef CONFIG_SYS_SPCR_OPT
+ /* Optimize transactions between CSB and other devices */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
+ (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
+#endif
+
+ /* Enable Time Base & Decrimenter (so we will have udelay()) */
+ im->sysconf.spcr |= SPCR_TBEN;
+
+ /* DDR control driver register */
+#ifdef CONFIG_SYS_DDRCDR
+ im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
+#endif
+ /* Output buffer impedance register */
+#ifdef CONFIG_SYS_OBIR
+ im->sysconf.obir = CONFIG_SYS_OBIR;
+#endif
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_OR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
+ im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
+ im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
+ im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
+ im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
+#else
+#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
+#endif
+}
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk(void)
+{
+ return (gd->bus_clk + 3L) / 4L;
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
--- /dev/null
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>,
+ * with some bits from older board-specific PCI initialization.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+#include <asm/mpc8349_pci.h>
+
+#define MAX_BUSES 2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_controller pci_hose[MAX_BUSES];
+static int pci_num_buses;
+
+static void pci_init_bus(int bus, struct pci_region *reg)
+{
+ volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile pot83xx_t *pot = immr->ios.pot;
+ volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
+ struct pci_controller *hose = &pci_hose[bus];
+ u32 dev;
+ u16 reg16;
+ int i;
+
+ if (bus == 1)
+ pot += 3;
+
+ /* Setup outbound translation windows */
+ for (i = 0; i < 3; i++, reg++, pot++) {
+ if (reg->size == 0)
+ break;
+
+ hose->regions[i] = *reg;
+ hose->region_count++;
+
+ pot->potar = reg->bus_start >> 12;
+ pot->pobar = reg->phys_start >> 12;
+ pot->pocmr = ~(reg->size - 1) >> 12;
+
+ if (reg->flags & PCI_REGION_IO)
+ pot->pocmr |= POCMR_IO;
+#ifdef CONFIG_83XX_PCI_STREAMING
+ else if (reg->flags & PCI_REGION_PREFETCH)
+ pot->pocmr |= POCMR_SE;
+#endif
+
+ if (bus == 1)
+ pot->pocmr |= POCMR_DST;
+
+ pot->pocmr |= POCMR_EN;
+ }
+
+ /* Point inbound translation at RAM */
+ pci_ctrl->pitar1 = 0;
+ pci_ctrl->pibar1 = 0;
+ pci_ctrl->piebar1 = 0;
+ pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = 0;
+ hose->regions[i].phys_start = 0;
+ hose->regions[i].size = gd->ram_size;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
+
+ hose->first_busno = pci_last_busno() + 1;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
+ CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+#ifndef CONFIG_PCISLAVE
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+
+/*
+ * The caller must have already set OCCR, and the PCI_LAW BARs
+ * must have been set to cover all of the requested regions.
+ *
+ * If fewer than three regions are requested, then the region
+ * list is terminated with a region of size 0.
+ */
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+ volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+ int i;
+
+ if (num_buses > MAX_BUSES) {
+ printf("%d PCI buses requsted, %d supported\n",
+ num_buses, MAX_BUSES);
+
+ num_buses = MAX_BUSES;
+ }
+
+ pci_num_buses = num_buses;
+
+ /*
+ * Release PCI RST Output signal.
+ * Power on to RST high must be at least 100 ms as per PCI spec.
+ * On warm boots only 1 ms is required.
+ */
+ udelay(warmboot ? 1000 : 100000);
+
+ for (i = 0; i < num_buses; i++)
+ immr->pci_ctrl[i].gcr = 1;
+
+ /*
+ * RST high to first config access must be at least 2^25 cycles
+ * as per PCI spec. This could be cut in half if we know we're
+ * running at 66MHz. This could be insufficiently long if we're
+ * running the PCI bus at significantly less than 33MHz.
+ */
+ udelay(1020000);
+
+ for (i = 0; i < num_buses; i++)
+ pci_init_bus(i, reg[i]);
+}
+
+#ifdef CONFIG_PCISLAVE
+
+#define PCI_FUNCTION_CONFIG 0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Unlock the configuration bit so that the host system can begin booting
+ *
+ * This should be used after you have:
+ * 1) Called mpc83xx_pci_init()
+ * 2) Set up your inbound translation windows to the appropriate size
+ */
+void mpc83xx_pcislave_unlock(int bus)
+{
+ struct pci_controller *hose = &pci_hose[bus];
+ u32 dev;
+ u16 reg16;
+
+ /* Unlock configuration lock in PCI function configuration register */
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16);
+ reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+ pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
+
+ /* The configuration bit is now unlocked, so we can scan the bus */
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ if (pci_num_buses < 1)
+ return;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+
+ if (pci_num_buses < 2)
+ return;
+
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+ }
+}
+#endif /* CONFIG_OF_LIBFDT */
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
+ *
+ * Authors: Tony Li <tony.li@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <mpc83xx.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PCIE_MAX_BUSES 2
+
+#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
+
+static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
+{
+ int bus = PCI_BUS(dev) - hose->first_busno;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ pex83xx_t *pex = &immr->pciexp[bus];
+ struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
+ u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
+ u32 dev_base = bus << 24 | devfn << 16;
+
+ if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
+ return -1;
+ /*
+ * Workaround for the HW bug: for Type 0 configure transactions the
+ * PCI-E controller does not check the device number bits and just
+ * assumes that the device number bits are 0.
+ */
+ if (devfn & 0xf8)
+ return -1;
+
+ out_le32(&out_win->tarl, dev_base);
+ return 0;
+}
+
+#define cfg_read(val, addr, type, op) \
+ do { *val = op((type)(addr)); } while (0)
+#define cfg_write(val, addr, type, op) \
+ do { op((type *)(addr), (val)); } while (0)
+
+#define cfg_read_err(val) do { *val = -1; } while (0)
+#define cfg_write_err(val) do { } while (0)
+
+#define PCIE_OP(rw, size, type, op) \
+static int pcie_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, \
+ type val) \
+{ \
+ int ret; \
+ \
+ ret = mpc83xx_pcie_remap_cfg(hose, dev); \
+ if (ret) { \
+ cfg_##rw##_err(val); \
+ return ret; \
+ } \
+ cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \
+ return 0; \
+}
+
+PCIE_OP(read, byte, u8 *, in_8)
+PCIE_OP(read, word, u16 *, in_le16)
+PCIE_OP(read, dword, u32 *, in_le32)
+PCIE_OP(write, byte, u8, out_8)
+PCIE_OP(write, word, u16, out_le16)
+PCIE_OP(write, dword, u32, out_le32)
+
+static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
+ u8 link)
+{
+ extern void disable_addr_trans(void); /* start.S */
+ static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
+ struct pci_controller *hose = &pcie_hose[bus];
+ int i;
+
+ /*
+ * There are no spare BATs to remap all PCI-E windows for U-Boot, so
+ * disable translations. In general, this is not great solution, and
+ * that's why we don't register PCI-E hoses by default.
+ */
+ disable_addr_trans();
+
+ for (i = 0; i < 2; i++, reg++) {
+ if (reg->size == 0)
+ break;
+
+ hose->regions[i] = *reg;
+ hose->region_count++;
+ }
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = 0;
+ hose->regions[i].phys_start = 0;
+ hose->regions[i].size = gd->ram_size;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = CONFIG_SYS_IMMR;
+ hose->regions[i].phys_start = CONFIG_SYS_IMMR;
+ hose->regions[i].size = 0x100000;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
+
+ hose->first_busno = pci_last_busno() + 1;
+ hose->last_busno = 0xff;
+
+ if (bus == 0)
+ hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE;
+ else
+ hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ if (!link)
+ hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
+
+ pci_register_hose(hose);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#else
+
+static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
+ u8 link) {}
+
+#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
+
+static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ pex83xx_t *pex = &immr->pciexp[bus];
+ struct pex_outbound_window *out_win;
+ struct pex_inbound_window *in_win;
+ void *hose_cfg_base;
+ unsigned int ram_sz;
+ unsigned int barl;
+ unsigned int tar;
+ u16 reg16;
+ int i;
+
+ /* Enable pex csb bridge inbound & outbound transactions */
+ out_le32(&pex->bridge.pex_csb_ctrl,
+ in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
+ PEX_CSB_CTRL_IBPIOE);
+
+ /* Enable bridge outbound */
+ out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
+ PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
+ PEX_CSB_OBCTRL_CFGWE);
+
+ out_win = &pex->bridge.pex_outbound_win[0];
+ if (bus) {
+ out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
+ CONFIG_SYS_PCIE2_CFG_SIZE);
+ out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE);
+ } else {
+ out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
+ CONFIG_SYS_PCIE1_CFG_SIZE);
+ out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE);
+ }
+ out_le32(&out_win->tarl, 0);
+ out_le32(&out_win->tarh, 0);
+
+ for (i = 0; i < 2; i++, reg++) {
+ u32 ar;
+
+ if (reg->size == 0)
+ break;
+
+ out_win = &pex->bridge.pex_outbound_win[i + 1];
+ out_le32(&out_win->bar, reg->phys_start);
+ out_le32(&out_win->tarl, reg->bus_start);
+ out_le32(&out_win->tarh, 0);
+ ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
+ if (reg->flags & PCI_REGION_IO)
+ ar |= PEX_OWAR_TYPE_IO;
+ else
+ ar |= PEX_OWAR_TYPE_MEM;
+ out_le32(&out_win->ar, ar);
+ }
+
+ out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
+
+ ram_sz = gd->ram_size;
+ barl = 0;
+ tar = 0;
+ i = 0;
+ while (ram_sz > 0) {
+ in_win = &pex->bridge.pex_inbound_win[i];
+ out_le32(&in_win->barl, barl);
+ out_le32(&in_win->barh, 0x0);
+ out_le32(&in_win->tar, tar);
+ if (ram_sz >= 0x10000000) {
+ /* The maxium windows size is 256M */
+ out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
+ PEX_IWAR_TYPE_PF | 0x0FFFF000);
+ barl += 0x10000000;
+ tar += 0x10000000;
+ ram_sz -= 0x10000000;
+ } else {
+ /* The UM is not clear here.
+ * So, round up to even Mb boundary */
+
+ ram_sz = ram_sz >> (20 +
+ ((ram_sz & 0xFFFFF) ? 1 : 0));
+ if (!(ram_sz % 2))
+ ram_sz -= 1;
+ out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
+ PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
+ ram_sz = 0;
+ }
+ i++;
+ }
+
+ in_win = &pex->bridge.pex_inbound_win[i];
+ out_le32(&in_win->barl, CONFIG_SYS_IMMR);
+ out_le32(&in_win->barh, 0);
+ out_le32(&in_win->tar, CONFIG_SYS_IMMR);
+ out_le32(&in_win->ar, PEX_IWAR_EN |
+ PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
+
+ /* Enable the host virtual INTX interrupts */
+ out_le32(&pex->bridge.pex_int_axi_misc_enb,
+ in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
+
+ /* Hose configure header is memory-mapped */
+ hose_cfg_base = (void *)pex;
+
+ get_clocks();
+ /* Configure the PCIE controller core clock ratio */
+ out_le32(hose_cfg_base + PEX_GCLK_RATIO,
+ (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
+ / 333);
+ udelay(1000000);
+
+ /* Do Type 1 bridge configuration */
+ out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
+ out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
+ out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ out_le16(hose_cfg_base + PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
+ out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
+ out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
+
+ printf("PCIE%d: ", bus);
+
+ reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
+ if (reg16 >= PCI_LTSSM_L0)
+ printf("link\n");
+ else
+ printf("No link\n");
+
+ mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
+}
+
+/*
+ * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
+ * must have been set to cover all of the requested regions.
+ */
+void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+ int i;
+
+ /*
+ * Release PCI RST Output signal.
+ * Power on to RST high must be at least 100 ms as per PCI spec.
+ * On warm boots only 1 ms is required.
+ */
+ udelay(warmboot ? 1000 : 100000);
+
+ for (i = 0; i < num_buses; i++)
+ mpc83xx_pcie_init_bus(i, reg[i]);
+}
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_83xx.h"
+
+#define NUM_OF_PINS 32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+ u32 pin_2bit_mask;
+ u32 pin_2bit_dir;
+ u32 pin_2bit_assign;
+ u32 pin_1bit_mask;
+ u32 tmp_val;
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio;
+
+ /* Caculate pin location and 2bit mask and dir */
+ pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+ pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Setup the direction */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+ in_be32(&par_io->ioport[port].dir2) :
+ in_be32(&par_io->ioport[port].dir1);
+
+ if (pin > (NUM_OF_PINS/2) -1) {
+ out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
+ }
+
+ /* Calculate pin location for 1bit mask */
+ pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+ /* Setup the open drain */
+ tmp_val = in_be32(&par_io->ioport[port].podr);
+ if (open_drain) {
+ out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
+ }
+
+ /* Setup the assignment */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+ in_be32(&par_io->ioport[port].ppar2):
+ in_be32(&par_io->ioport[port].ppar1);
+ pin_2bit_assign = (u32)(assign
+ << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS/2) - 1) {
+ out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
+ } else {
+ out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
+ }
+}
--- /dev/null
+/*
+ * Freescale SerDes initialization routine
+ *
+ * Copyright (C) 2007 Freescale Semicondutor, Inc.
+ * Copyright (C) 2008 MontaVista Software, Inc.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+
+/* SerDes registers */
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_DPP_1V2 0x00008800
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_PLLBW 0x00000040
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_VDD_1V2 0x00800000
+#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
+#define FSL_SRDSCR2_SEIC_SATA 0x00001414
+#define FSL_SRDSCR2_SEIC_PEX 0x00001010
+#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_KFR_SATA 0x10100000
+#define FSL_SRDSCR3_KPH_SATA 0x04040000
+#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
+#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
+#define FSL_SRDSCR4_OFFS 0x10
+#define FSL_SRDSCR4_PROT_SATA 0x00000808
+#define FSL_SRDSCR4_PROT_PEX 0x00000101
+#define FSL_SRDSCR4_PROT_SGMII 0x00000505
+#define FSL_SRDSCR4_PLANE_X2 0x01000000
+#define FSL_SRDSRSTCTL_OFFS 0x20
+#define FSL_SRDSRSTCTL_RST 0x80000000
+#define FSL_SRDSRSTCTL_SATA_RESET 0xf
+
+void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
+{
+ void *regs = (void *)CONFIG_SYS_IMMR + offset;
+ u32 tmp;
+
+ /* 1.0V corevdd */
+ if (vdd) {
+ /* DPPE/DPPA = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_DPP_1V2;
+ out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
+
+ /* VDD = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_VDD_1V2;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+ }
+
+ /* protocol specific configuration */
+ switch (proto) {
+ case FSL_SERDES_PROTO_SATA:
+ /* Set and clear reset bits */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+ udelay(1000);
+ tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SATA;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
+ FSL_SRDSCR3_SDFM_SATA_PEX |
+ FSL_SRDSCR3_SDTXL_SATA;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ case FSL_SERDES_PROTO_PEX:
+ case FSL_SERDES_PROTO_PEX_X2:
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp |= FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_PEX;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
+ if (proto == FSL_SERDES_PROTO_PEX_X2)
+ tmp |= FSL_SRDSCR4_PLANE_X2;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ case FSL_SERDES_PROTO_SGMII:
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SGMII;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, 0);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+ break;
+ default:
+ return;
+ }
+
+ /* Do a software reset */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_RST;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+}
--- /dev/null
+/*
+ * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <spd.h>
+#include <asm/mmu.h>
+#include <spd_sdram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_add_ram_info(int use_default)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ char buf[32];
+
+ printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
+ >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
+
+ if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
+ puts(", 32-bit");
+ else
+ puts(", 64-bit");
+
+ if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
+ puts(", ECC on");
+ else
+ puts(", ECC off");
+
+ printf(", %s MHz)", strmhz(buf, gd->mem_clk));
+
+#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
+ puts("\nSDRAM: ");
+ print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
+#endif
+}
+
+#ifdef CONFIG_SPD_EEPROM
+#ifndef CONFIG_SYS_READ_SPD
+#define CONFIG_SYS_READ_SPD i2c_read
+#endif
+
+/*
+ * Convert picoseconds into clock cycles (rounding up if needed).
+ */
+int
+picos_to_clk(int picos)
+{
+ unsigned int mem_bus_clk;
+ int clks;
+
+ mem_bus_clk = gd->mem_clk >> 1;
+ clks = picos / (1000000000 / (mem_bus_clk / 1000));
+ if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
+ clks++;
+
+ return clks;
+}
+
+unsigned int banksize(unsigned char row_dens)
+{
+ return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
+}
+
+int read_spd(uint addr)
+{
+ return ((int) addr);
+}
+
+#undef SPD_DEBUG
+#ifdef SPD_DEBUG
+static void spd_debug(spd_eeprom_t *spd)
+{
+ printf ("\nDIMM type: %-18.18s\n", spd->mpart);
+ printf ("SPD size: %d\n", spd->info_size);
+ printf ("EEPROM size: %d\n", 1 << spd->chip_size);
+ printf ("Memory type: %d\n", spd->mem_type);
+ printf ("Row addr: %d\n", spd->nrow_addr);
+ printf ("Column addr: %d\n", spd->ncol_addr);
+ printf ("# of rows: %d\n", spd->nrows);
+ printf ("Row density: %d\n", spd->row_dens);
+ printf ("# of banks: %d\n", spd->nbanks);
+ printf ("Data width: %d\n",
+ 256 * spd->dataw_msb + spd->dataw_lsb);
+ printf ("Chip width: %d\n", spd->primw);
+ printf ("Refresh rate: %02X\n", spd->refresh);
+ printf ("CAS latencies: %02X\n", spd->cas_lat);
+ printf ("Write latencies: %02X\n", spd->write_lat);
+ printf ("tRP: %d\n", spd->trp);
+ printf ("tRCD: %d\n", spd->trcd);
+ printf ("\n");
+}
+#endif /* SPD_DEBUG */
+
+long int spd_sdram()
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
+ spd_eeprom_t spd;
+ unsigned int n_ranks;
+ unsigned int odt_rd_cfg, odt_wr_cfg;
+ unsigned char twr_clk, twtr_clk;
+ unsigned int sdram_type;
+ unsigned int memsize;
+ unsigned int law_size;
+ unsigned char caslat, caslat_ctrl;
+ unsigned int trfc, trfc_clk, trfc_low, trfc_high;
+ unsigned int trcd_clk, trtp_clk;
+ unsigned char cke_min_clk;
+ unsigned char add_lat, wr_lat;
+ unsigned char wr_data_delay;
+ unsigned char four_act;
+ unsigned char cpo;
+ unsigned char burstlen;
+ unsigned char odt_cfg, mode_odt_enable;
+ unsigned int max_bus_clk;
+ unsigned int max_data_rate, effective_data_rate;
+ unsigned int ddrc_clk;
+ unsigned int refresh_clk;
+ unsigned int sdram_cfg;
+ unsigned int ddrc_ecc_enable;
+ unsigned int pvr = get_pvr();
+
+ /*
+ * First disable the memory controller (could be enabled
+ * by the debugger)
+ */
+ clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
+ sync();
+ isync();
+
+ /* Read SPD parameters with I2C */
+ CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
+#ifdef SPD_DEBUG
+ spd_debug(&spd);
+#endif
+ /* Check the memory type */
+ if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
+ debug("DDR: Module mem type is %02X\n", spd.mem_type);
+ return 0;
+ }
+
+ /* Check the number of physical bank */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ n_ranks = spd.nrows;
+ } else {
+ n_ranks = (spd.nrows & 0x7) + 1;
+ }
+
+ if (n_ranks > 2) {
+ printf("DDR: The number of physical bank is %02X\n", n_ranks);
+ return 0;
+ }
+
+ /* Check if the number of row of the module is in the range of DDRC */
+ if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
+ printf("DDR: Row number is out of range of DDRC, row=%02X\n",
+ spd.nrow_addr);
+ return 0;
+ }
+
+ /* Check if the number of col of the module is in the range of DDRC */
+ if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+ printf("DDR: Col number is out of range of DDRC, col=%02X\n",
+ spd.ncol_addr);
+ return 0;
+ }
+
+#ifdef CONFIG_SYS_DDRCDR_VALUE
+ /*
+ * Adjust DDR II IO voltage biasing. It just makes it work.
+ */
+ if(spd.mem_type == SPD_MEMTYPE_DDR2) {
+ immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
+ }
+ udelay(50000);
+#endif
+
+ /*
+ * ODT configuration recommendation from DDR Controller Chapter.
+ */
+ odt_rd_cfg = 0; /* Never assert ODT */
+ odt_wr_cfg = 0; /* Never assert ODT */
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ odt_wr_cfg = 1; /* Assert ODT on writes to CSn */
+ }
+
+ /* Setup DDR chip select register */
+#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
+ ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ ddr->cs_config[0] = ( 1 << 31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | ((spd.nbanks == 8 ? 1 : 0) << 14)
+ | ((spd.nrow_addr - 12) << 8)
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+ debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+ if (n_ranks == 2) {
+ ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+ | ((banksize(spd.row_dens) >> 23) - 1) );
+ ddr->cs_config[1] = ( 1<<31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | ((spd.nbanks == 8 ? 1 : 0) << 14)
+ | ((spd.nrow_addr - 12) << 8)
+ | (spd.ncol_addr - 8) );
+ debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+ debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+ }
+
+#else
+ ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ ddr->cs_config[2] = ( 1 << 31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | ((spd.nbanks == 8 ? 1 : 0) << 14)
+ | ((spd.nrow_addr - 12) << 8)
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
+ debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
+
+ if (n_ranks == 2) {
+ ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
+ | ((banksize(spd.row_dens) >> 23) - 1) );
+ ddr->cs_config[3] = ( 1<<31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | ((spd.nbanks == 8 ? 1 : 0) << 14)
+ | ((spd.nrow_addr - 12) << 8)
+ | (spd.ncol_addr - 8) );
+ debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
+ debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
+ }
+#endif
+
+ /*
+ * Figure out memory size in Megabytes.
+ */
+ memsize = n_ranks * banksize(spd.row_dens) / 0x100000;
+
+ /*
+ * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
+ */
+ law_size = 19 + __ilog2(memsize);
+
+ /*
+ * Set up LAWBAR for all of DDR.
+ */
+ ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
+ ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
+ debug("DDR:bar=0x%08x\n", ecm->bar);
+ debug("DDR:ar=0x%08x\n", ecm->ar);
+
+ /*
+ * Find the largest CAS by locating the highest 1 bit
+ * in the spd.cas_lat field. Translate it to a DDR
+ * controller field value:
+ *
+ * CAS Lat DDR I DDR II Ctrl
+ * Clocks SPD Bit SPD Bit Value
+ * ------- ------- ------- -----
+ * 1.0 0 0001
+ * 1.5 1 0010
+ * 2.0 2 2 0011
+ * 2.5 3 0100
+ * 3.0 4 3 0101
+ * 3.5 5 0110
+ * 4.0 6 4 0111
+ * 4.5 1000
+ * 5.0 5 1001
+ */
+ caslat = __ilog2(spd.cas_lat);
+ if ((spd.mem_type == SPD_MEMTYPE_DDR)
+ && (caslat > 6)) {
+ printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
+ return 0;
+ } else if (spd.mem_type == SPD_MEMTYPE_DDR2
+ && (caslat < 2 || caslat > 5)) {
+ printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
+ spd.cas_lat);
+ return 0;
+ }
+ debug("DDR: caslat SPD bit is %d\n", caslat);
+
+ max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+ + (spd.clk_cycle & 0x0f));
+ max_data_rate = max_bus_clk * 2;
+
+ debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
+
+ ddrc_clk = gd->mem_clk / 1000000;
+ effective_data_rate = 0;
+
+ if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
+ if (spd.cas_lat & 0x08)
+ caslat = 3;
+ else
+ caslat = 4;
+ if (ddrc_clk <= 460 && ddrc_clk > 350)
+ effective_data_rate = 400;
+ else if (ddrc_clk <=350 && ddrc_clk > 280)
+ effective_data_rate = 333;
+ else if (ddrc_clk <= 280 && ddrc_clk > 230)
+ effective_data_rate = 266;
+ else
+ effective_data_rate = 200;
+ } else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
+ if (ddrc_clk <= 460 && ddrc_clk > 350) {
+ /* DDR controller clk at 350~460 */
+ effective_data_rate = 400; /* 5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ if (spd.clk_cycle2 == 0x60)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ if (spd.clk_cycle3 == 0x75)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0x75)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle3 == 0xa0)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0xa0)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ }
+ } else if (max_data_rate >= 323) { /* it is DDR 333 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ if (spd.clk_cycle2 == 0x75)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle3 == 0xa0)
+ caslat = caslat - 2;
+ else if (spd.clk_cycle2 == 0xa0)
+ caslat = caslat - 1;
+ else
+ caslat = caslat;
+ }
+ } else if (max_data_rate >= 256) { /* it is DDR 266 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDR controller clk at 280~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ if (spd.clk_cycle2 == 0xa0)
+ caslat = caslat - 1;
+ }
+ } else if (max_data_rate >= 190) { /* it is DDR 200 */
+ if (ddrc_clk <= 350 && ddrc_clk > 230) {
+ /* DDR controller clk at 230~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDR controller clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ caslat = caslat;
+ }
+ }
+
+ debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
+ debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
+
+ /*
+ * Errata DDR6 work around: input enable 2 cycles earlier.
+ * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+ */
+ if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
+ if (caslat == 2)
+ ddr->debug_reg = 0x201c0000; /* CL=2 */
+ else if (caslat == 3)
+ ddr->debug_reg = 0x202c0000; /* CL=2.5 */
+ else if (caslat == 4)
+ ddr->debug_reg = 0x202c0000; /* CL=3.0 */
+
+ __asm__ __volatile__ ("sync");
+
+ debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
+ }
+
+ /*
+ * Convert caslat clocks to DDR controller value.
+ * Force caslat_ctrl to be DDR Controller field-sized.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ caslat_ctrl = (caslat + 1) & 0x07;
+ } else {
+ caslat_ctrl = (2 * caslat - 1) & 0x0f;
+ }
+
+ debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
+ debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
+ caslat, caslat_ctrl);
+
+ /*
+ * Timing Config 0.
+ * Avoid writing for DDR I.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ unsigned char taxpd_clk = 8; /* By the book. */
+ unsigned char tmrd_clk = 2; /* By the book. */
+ unsigned char act_pd_exit = 2; /* Empirical? */
+ unsigned char pre_pd_exit = 6; /* Empirical? */
+
+ ddr->timing_cfg_0 = (0
+ | ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */
+ | ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */
+ | ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */
+ | ((tmrd_clk & 0xf) << 0) /* MRS_CYC */
+ );
+ debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+ }
+
+ /*
+ * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
+ * use conservative value.
+ * For DDR II, they are bytes 36 and 37, in quarter nanos.
+ */
+
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ twr_clk = 3; /* Clocks */
+ twtr_clk = 1; /* Clocks */
+ } else {
+ twr_clk = picos_to_clk(spd.twr * 250);
+ twtr_clk = picos_to_clk(spd.twtr * 250);
+ if (twtr_clk < 2)
+ twtr_clk = 2;
+ }
+
+ /*
+ * Calculate Trfc, in picos.
+ * DDR I: Byte 42 straight up in ns.
+ * DDR II: Byte 40 and 42 swizzled some, in ns.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ trfc = spd.trfc * 1000; /* up to ps */
+ } else {
+ unsigned int byte40_table_ps[8] = {
+ 0,
+ 250,
+ 330,
+ 500,
+ 660,
+ 750,
+ 0,
+ 0
+ };
+
+ trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
+ + byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
+ }
+ trfc_clk = picos_to_clk(trfc);
+
+ /*
+ * Trcd, Byte 29, from quarter nanos to ps and clocks.
+ */
+ trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
+
+ /*
+ * Convert trfc_clk to DDR controller fields. DDR I should
+ * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
+ * 83xx controller has an extended REFREC field of three bits.
+ * The controller automatically adds 8 clocks to this value,
+ * so preadjust it down 8 first before splitting it up.
+ */
+ trfc_low = (trfc_clk - 8) & 0xf;
+ trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
+
+ ddr->timing_cfg_1 =
+ (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | /* PRETOACT */
+ ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
+ (trcd_clk << 20 ) | /* ACTTORW */
+ (caslat_ctrl << 16 ) | /* CASLAT */
+ (trfc_low << 12 ) | /* REFEC */
+ ((twr_clk & 0x07) << 8) | /* WRRREC */
+ ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | /* ACTTOACT */
+ ((twtr_clk & 0x07) << 0) /* WRTORD */
+ );
+
+ /*
+ * Additive Latency
+ * For DDR I, 0.
+ * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
+ * which comes from Trcd, and also note that:
+ * add_lat + caslat must be >= 4
+ */
+ add_lat = 0;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2
+ && (odt_wr_cfg || odt_rd_cfg)
+ && (caslat < 4)) {
+ add_lat = 4 - caslat;
+ if ((add_lat + caslat) < 4) {
+ add_lat = 0;
+ }
+ }
+
+ /*
+ * Write Data Delay
+ * Historically 0x2 == 4/8 clock delay.
+ * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
+ */
+ wr_data_delay = 2;
+
+ /*
+ * Write Latency
+ * Read to Precharge
+ * Minimum CKE Pulse Width.
+ * Four Activate Window
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ /*
+ * This is a lie. It should really be 1, but if it is
+ * set to 1, bits overlap into the old controller's
+ * otherwise unused ACSM field. If we leave it 0, then
+ * the HW will magically treat it as 1 for DDR 1. Oh Yea.
+ */
+ wr_lat = 0;
+
+ trtp_clk = 2; /* By the book. */
+ cke_min_clk = 1; /* By the book. */
+ four_act = 1; /* By the book. */
+
+ } else {
+ wr_lat = caslat - 1;
+
+ /* Convert SPD value from quarter nanos to picos. */
+ trtp_clk = picos_to_clk(spd.trtp * 250);
+ if (trtp_clk < 2)
+ trtp_clk = 2;
+ trtp_clk += add_lat;
+
+ cke_min_clk = 3; /* By the book. */
+ four_act = picos_to_clk(37500); /* By the book. 1k pages? */
+ }
+
+ /*
+ * Empirically set ~MCAS-to-preamble override for DDR 2.
+ * Your milage will vary.
+ */
+ cpo = 0;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ if (effective_data_rate == 266) {
+ cpo = 0x4; /* READ_LAT + 1/2 */
+ } else if (effective_data_rate == 333) {
+ cpo = 0x6; /* READ_LAT + 1 */
+ } else if (effective_data_rate == 400) {
+ cpo = 0x7; /* READ_LAT + 5/4 */
+ } else {
+ /* Automatic calibration */
+ cpo = 0x1f;
+ }
+ }
+
+ ddr->timing_cfg_2 = (0
+ | ((add_lat & 0x7) << 28) /* ADD_LAT */
+ | ((cpo & 0x1f) << 23) /* CPO */
+ | ((wr_lat & 0x7) << 19) /* WR_LAT */
+ | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
+ | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
+ | ((cke_min_clk & 0x7) << 6) /* CKE_PLS */
+ | ((four_act & 0x1f) << 0) /* FOUR_ACT */
+ );
+
+ debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
+ debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
+
+ /* Check DIMM data bus width */
+ if (spd.dataw_lsb < 64) {
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ else
+ burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
+ debug("\n DDR DIMM: data bus width is 32 bit");
+ } else {
+ burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
+ debug("\n DDR DIMM: data bus width is 64 bit");
+ }
+
+ /* Is this an ECC DDR chip? */
+ if (spd.config == 0x02)
+ debug(" with ECC\n");
+ else
+ debug(" without ECC\n");
+
+ /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
+ Burst type is sequential
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ switch (caslat) {
+ case 1:
+ ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+ break;
+ case 2:
+ ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
+ break;
+ case 3:
+ ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
+ break;
+ case 4:
+ ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
+ break;
+ default:
+ printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
+ return 0;
+ }
+ } else {
+ mode_odt_enable = 0x0; /* Default disabled */
+ if (odt_wr_cfg || odt_rd_cfg) {
+ /*
+ * Bits 6 and 2 in Extended MRS(1)
+ * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
+ * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
+ */
+ mode_odt_enable = 0x40; /* 150 Ohm */
+ }
+
+ ddr->sdram_mode =
+ (0
+ | (1 << (16 + 10)) /* DQS Differential disable */
+ | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
+ | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
+ | ((twr_clk - 1) << 9) /* Write Recovery Autopre */
+ | (caslat << 4) /* caslat */
+ | (burstlen << 0) /* Burst length */
+ );
+ }
+ debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
+
+ /*
+ * Clear EMRS2 and EMRS3.
+ */
+ ddr->sdram_mode2 = 0;
+ debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
+
+ switch (spd.refresh) {
+ case 0x00:
+ case 0x80:
+ refresh_clk = picos_to_clk(15625000);
+ break;
+ case 0x01:
+ case 0x81:
+ refresh_clk = picos_to_clk(3900000);
+ break;
+ case 0x02:
+ case 0x82:
+ refresh_clk = picos_to_clk(7800000);
+ break;
+ case 0x03:
+ case 0x83:
+ refresh_clk = picos_to_clk(31300000);
+ break;
+ case 0x04:
+ case 0x84:
+ refresh_clk = picos_to_clk(62500000);
+ break;
+ case 0x05:
+ case 0x85:
+ refresh_clk = picos_to_clk(125000000);
+ break;
+ default:
+ refresh_clk = 0x512;
+ break;
+ }
+
+ /*
+ * Set BSTOPRE to 0x100 for page mode
+ * If auto-charge is used, set BSTOPRE = 0
+ */
+ ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
+ debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
+
+ /*
+ * SDRAM Cfg 2
+ */
+ odt_cfg = 0;
+#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
+ if (odt_rd_cfg | odt_wr_cfg) {
+ odt_cfg = 0x2; /* ODT to IOs during reads */
+ }
+#endif
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ ddr->sdram_cfg2 = (0
+ | (0 << 26) /* True DQS */
+ | (odt_cfg << 21) /* ODT only read */
+ | (1 << 12) /* 1 refresh at a time */
+ );
+
+ debug("DDR: sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg2);
+ }
+
+#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */
+ ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
+#endif
+ debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
+
+ asm("sync;isync");
+
+ udelay(600);
+
+ /*
+ * Figure out the settings for the sdram_cfg register. Build up
+ * the value in 'sdram_cfg' before writing since the write into
+ * the register will actually enable the memory controller, and all
+ * settings must be done before enabling.
+ *
+ * sdram_cfg[0] = 1 (ddr sdram logic enable)
+ * sdram_cfg[1] = 1 (self-refresh-enable)
+ * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
+ * 010 DDR 1 SDRAM
+ * 011 DDR 2 SDRAM
+ * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
+ * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
+ else
+ sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
+
+ sdram_cfg = (0
+ | SDRAM_CFG_MEM_EN /* DDR enable */
+ | SDRAM_CFG_SREN /* Self refresh */
+ | sdram_type /* SDRAM type */
+ );
+
+ /* sdram_cfg[3] = RD_EN - registered DIMM enable */
+ if (spd.mod_attr & 0x02)
+ sdram_cfg |= SDRAM_CFG_RD_EN;
+
+ /* The DIMM is 32bit width */
+ if (spd.dataw_lsb < 64) {
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2)
+ sdram_cfg |= SDRAM_CFG_32_BE;
+ }
+
+ ddrc_ecc_enable = 0;
+
+#if defined(CONFIG_DDR_ECC)
+ /* Enable ECC with sdram_cfg[2] */
+ if (spd.config == 0x02) {
+ sdram_cfg |= 0x20000000;
+ ddrc_ecc_enable = 1;
+ /* disable error detection */
+ ddr->err_disable = ~ECC_ERROR_ENABLE;
+ /* set single bit error threshold to maximum value,
+ * reset counter to zero */
+ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+ (0 << ECC_ERROR_MAN_SBEC_SHIFT);
+ }
+
+ debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+ debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
+#endif
+ debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
+
+#if defined(CONFIG_DDR_2T_TIMING)
+ /*
+ * Enable 2T timing by setting sdram_cfg[16].
+ */
+ sdram_cfg |= SDRAM_CFG_2T_EN;
+#endif
+ /* Enable controller, and GO! */
+ ddr->sdram_cfg = sdram_cfg;
+ asm("sync;isync");
+ udelay(500);
+
+ debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
+ return memsize; /*in MBytes*/
+}
+#endif /* CONFIG_SPD_EEPROM */
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+/*
+ * Use timebase counter, get_timer() is not availabe
+ * at this point of initialization yet.
+ */
+static __inline__ unsigned long get_tbms (void)
+{
+ unsigned long tbl;
+ unsigned long tbu1, tbu2;
+ unsigned long ms;
+ unsigned long long tmp;
+
+ ulong tbclk = get_tbclk();
+
+ /* get the timebase ticks */
+ do {
+ asm volatile ("mftbu %0":"=r" (tbu1):);
+ asm volatile ("mftb %0":"=r" (tbl):);
+ asm volatile ("mftbu %0":"=r" (tbu2):);
+ } while (tbu1 != tbu2);
+
+ /* convert ticks to ms */
+ tmp = (unsigned long long)(tbu1);
+ tmp = (tmp << 32);
+ tmp += (unsigned long long)(tbl);
+ ms = tmp/(tbclk/1000);
+
+ return ms;
+}
+
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+void ddr_enable_ecc(unsigned int dram_size)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ddr83xx_t *ddr= &immap->ddr;
+ unsigned long t_start, t_end;
+ register u64 *p;
+ register uint size;
+ unsigned int pattern[2];
+
+ icache_enable();
+ t_start = get_tbms();
+ pattern[0] = 0xdeadbeef;
+ pattern[1] = 0xdeadbeef;
+
+#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
+ dma_meminit(pattern[0], dram_size);
+#else
+ debug("ddr init: CPU FP write method\n");
+ size = dram_size;
+ for (p = 0; p < (u64*)(size); p++) {
+ ppcDWstore((u32*)p, pattern);
+ }
+ __asm__ __volatile__ ("sync");
+#endif
+
+ t_end = get_tbms();
+ icache_disable();
+
+ debug("\nREADY!!\n");
+ debug("ddr init duration: %ld ms\n", t_end - t_start);
+
+ /* Clear All ECC Errors */
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
+ ddr->err_detect |= ECC_ERROR_DETECT_MME;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
+ ddr->err_detect |= ECC_ERROR_DETECT_MBE;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
+ ddr->err_detect |= ECC_ERROR_DETECT_SBE;
+ if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
+ ddr->err_detect |= ECC_ERROR_DETECT_MSE;
+
+ /* Disable ECC-Interrupts */
+ ddr->err_int_en &= ECC_ERR_INT_DISABLE;
+
+ /* Enable errors for ECC */
+ ddr->err_disable &= ECC_ERROR_ENABLE;
+
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+}
+#endif /* CONFIG_DDR_ECC */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <command.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ----------------------------------------------------------------- */
+
+typedef enum {
+ _unk,
+ _off,
+ _byp,
+ _x8,
+ _x4,
+ _x2,
+ _x1,
+ _1x,
+ _1_5x,
+ _2x,
+ _2_5x,
+ _3x
+} mult_t;
+
+typedef struct {
+ mult_t core_csb_ratio;
+ mult_t vco_divider;
+} corecnf_t;
+
+corecnf_t corecnf_tab[] = {
+ {_byp, _byp}, /* 0x00 */
+ {_byp, _byp}, /* 0x01 */
+ {_byp, _byp}, /* 0x02 */
+ {_byp, _byp}, /* 0x03 */
+ {_byp, _byp}, /* 0x04 */
+ {_byp, _byp}, /* 0x05 */
+ {_byp, _byp}, /* 0x06 */
+ {_byp, _byp}, /* 0x07 */
+ {_1x, _x2}, /* 0x08 */
+ {_1x, _x4}, /* 0x09 */
+ {_1x, _x8}, /* 0x0A */
+ {_1x, _x8}, /* 0x0B */
+ {_1_5x, _x2}, /* 0x0C */
+ {_1_5x, _x4}, /* 0x0D */
+ {_1_5x, _x8}, /* 0x0E */
+ {_1_5x, _x8}, /* 0x0F */
+ {_2x, _x2}, /* 0x10 */
+ {_2x, _x4}, /* 0x11 */
+ {_2x, _x8}, /* 0x12 */
+ {_2x, _x8}, /* 0x13 */
+ {_2_5x, _x2}, /* 0x14 */
+ {_2_5x, _x4}, /* 0x15 */
+ {_2_5x, _x8}, /* 0x16 */
+ {_2_5x, _x8}, /* 0x17 */
+ {_3x, _x2}, /* 0x18 */
+ {_3x, _x4}, /* 0x19 */
+ {_3x, _x8}, /* 0x1A */
+ {_3x, _x8}, /* 0x1B */
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ *
+ */
+int get_clocks(void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 pci_sync_in;
+ u8 spmf;
+ u8 clkin_div;
+ u32 sccr;
+ u32 corecnf_tab_index;
+ u8 corepll;
+ u32 lcrr;
+
+ u32 csb_clk;
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+ u32 tsec1_clk;
+ u32 tsec2_clk;
+ u32 usbdr_clk;
+#endif
+#ifdef CONFIG_MPC834x
+ u32 usbmph_clk;
+#endif
+ u32 core_clk;
+ u32 i2c1_clk;
+#if !defined(CONFIG_MPC832x)
+ u32 i2c2_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837x)
+ u32 sdhc_clk;
+#endif
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 mem_clk;
+#if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+ u32 qepmf;
+ u32 qepdf;
+ u32 qe_clk;
+ u32 brg_clk;
+#endif
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
+
+ if (im->reset.rcwh & HRCWH_PCI_HOST) {
+#if defined(CONFIG_83XX_CLKIN)
+ pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
+ } else {
+#if defined(CONFIG_83XX_PCICLK)
+ pci_sync_in = CONFIG_83XX_PCICLK;
+#else
+ pci_sync_in = 0xDEADBEEF;
+#endif
+ }
+
+ spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
+ csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
+
+ sccr = im->clk.sccr;
+
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+ switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
+ case 0:
+ tsec1_clk = 0;
+ break;
+ case 1:
+ tsec1_clk = csb_clk;
+ break;
+ case 2:
+ tsec1_clk = csb_clk / 2;
+ break;
+ case 3:
+ tsec1_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TSEC1CM value */
+ return -2;
+ }
+
+ switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+ case 0:
+ usbdr_clk = 0;
+ break;
+ case 1:
+ usbdr_clk = csb_clk;
+ break;
+ case 2:
+ usbdr_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbdr_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBDRCM value */
+ return -3;
+ }
+#endif
+
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
+ case 0:
+ tsec2_clk = 0;
+ break;
+ case 1:
+ tsec2_clk = csb_clk;
+ break;
+ case 2:
+ tsec2_clk = csb_clk / 2;
+ break;
+ case 3:
+ tsec2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TSEC2CM value */
+ return -4;
+ }
+#elif defined(CONFIG_MPC8313)
+ tsec2_clk = tsec1_clk;
+
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
+#endif
+
+#if defined(CONFIG_MPC834x)
+ switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
+ case 0:
+ usbmph_clk = 0;
+ break;
+ case 1:
+ usbmph_clk = csb_clk;
+ break;
+ case 2:
+ usbmph_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbmph_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBMPHCM value */
+ return -5;
+ }
+
+ if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
+ /* if USB MPH clock is not disabled and
+ * USB DR clock is not disabled then
+ * USB MPH & USB DR must have the same rate
+ */
+ return -6;
+ }
+#endif
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -7;
+ }
+
+#if defined(CONFIG_MPC837x)
+ switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
+ case 0:
+ sdhc_clk = 0;
+ break;
+ case 1:
+ sdhc_clk = csb_clk;
+ break;
+ case 2:
+ sdhc_clk = csb_clk / 2;
+ break;
+ case 3:
+ sdhc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SDHCCM value */
+ return -8;
+ }
+#endif
+#if defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
+ case 0:
+ tdm_clk = 0;
+ break;
+ case 1:
+ tdm_clk = csb_clk;
+ break;
+ case 2:
+ tdm_clk = csb_clk / 2;
+ break;
+ case 3:
+ tdm_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TDMCM value */
+ return -8;
+ }
+#endif
+
+#if defined(CONFIG_MPC834x)
+ i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
+ i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832x)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831x)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837x)
+ i2c1_clk = sdhc_clk;
+#endif
+#if !defined(CONFIG_MPC832x)
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+#endif
+
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+ switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
+ case 0:
+ pciexp1_clk = 0;
+ break;
+ case 1:
+ pciexp1_clk = csb_clk;
+ break;
+ case 2:
+ pciexp1_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp1_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP1CM value */
+ return -9;
+ }
+
+ switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+ case 0:
+ pciexp2_clk = 0;
+ break;
+ case 1:
+ pciexp2_clk = csb_clk;
+ break;
+ case 2:
+ pciexp2_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP2CM value */
+ return -10;
+ }
+#endif
+
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+ case 0:
+ sata_clk = 0;
+ break;
+ case 1:
+ sata_clk = csb_clk;
+ break;
+ case 2:
+ sata_clk = csb_clk / 2;
+ break;
+ case 3:
+ sata_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SATACM value */
+ return -11;
+ }
+#endif
+
+ lbiu_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+ lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+ switch (lcrr) {
+ case 2:
+ case 4:
+ case 8:
+ lclk_clk = lbiu_clk / lcrr;
+ break;
+ default:
+ /* unknown lcrr */
+ return -12;
+ }
+
+ mem_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
+ corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
+#if defined(CONFIG_MPC8360)
+ mem_sec_clk = csb_clk * (1 +
+ ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
+#endif
+
+ corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
+ if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
+ /* corecnf_tab_index is too high, possibly worng value */
+ return -11;
+ }
+ switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
+ case _byp:
+ case _x1:
+ case _1x:
+ core_clk = csb_clk;
+ break;
+ case _1_5x:
+ core_clk = (3 * csb_clk) / 2;
+ break;
+ case _2x:
+ core_clk = 2 * csb_clk;
+ break;
+ case _2_5x:
+ core_clk = (5 * csb_clk) / 2;
+ break;
+ case _3x:
+ core_clk = 3 * csb_clk;
+ break;
+ default:
+ /* unkown core to csb ratio */
+ return -13;
+ }
+
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+ qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
+ qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
+ qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
+ brg_clk = qe_clk / 2;
+#endif
+
+ gd->csb_clk = csb_clk;
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+ gd->tsec1_clk = tsec1_clk;
+ gd->tsec2_clk = tsec2_clk;
+ gd->usbdr_clk = usbdr_clk;
+#endif
+#if defined(CONFIG_MPC834x)
+ gd->usbmph_clk = usbmph_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ gd->tdm_clk = tdm_clk;
+#endif
+#if defined(CONFIG_MPC837x)
+ gd->sdhc_clk = sdhc_clk;
+#endif
+ gd->core_clk = core_clk;
+ gd->i2c1_clk = i2c1_clk;
+#if !defined(CONFIG_MPC832x)
+ gd->i2c2_clk = i2c2_clk;
+#endif
+ gd->enc_clk = enc_clk;
+ gd->lbiu_clk = lbiu_clk;
+ gd->lclk_clk = lclk_clk;
+ gd->mem_clk = mem_clk;
+#if defined(CONFIG_MPC8360)
+ gd->mem_sec_clk = mem_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+ gd->qe_clk = qe_clk;
+ gd->brg_clk = brg_clk;
+#endif
+#if defined(CONFIG_MPC837x)
+ gd->pciexp1_clk = pciexp1_clk;
+ gd->pciexp2_clk = pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ gd->sata_clk = sata_clk;
+#endif
+ gd->pci_clk = pci_sync_in;
+ gd->cpu_clk = gd->core_clk;
+ gd->bus_clk = gd->csb_clk;
+ return 0;
+
+}
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq(ulong dummy)
+{
+ return gd->csb_clk;
+}
+
+int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ char buf[32];
+
+ printf("Clock configuration:\n");
+ printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
+ printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+ printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
+ printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
+#endif
+ printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
+ printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+ printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
+#if defined(CONFIG_MPC8360)
+ printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
+#endif
+ printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+ printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
+#if !defined(CONFIG_MPC832x)
+ printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
+#endif
+#if defined(CONFIG_MPC8315)
+ printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
+#endif
+#if defined(CONFIG_MPC837x)
+ printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
+#endif
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+ printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
+ printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
+ printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#endif
+#if defined(CONFIG_MPC834x)
+ printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
+#endif
+#if defined(CONFIG_MPC837x)
+ printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
+ printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
+#endif
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
+#endif
+ return 0;
+}
+
+U_BOOT_CMD(clocks, 1, 0, do_clocks,
+ "print clock configuration",
+ " clocks"
+);
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
+ */
+
+#include <config.h>
+#include <mpc83xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING "MPC83XX"
+#endif
+
+/* We don't want the MMU yet.
+ */
+#undef MSR_KERNEL
+
+/*
+ * Floating Point enable, Machine Check and Recoverable Interr.
+ */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
+#define CONFIG_SYS_FLASHBOOT
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(__bss_start)
+ GOT_ENTRY(_end)
+
+#ifndef CONFIG_NAND_SPL
+ GOT_ENTRY(_FIXUP_TABLE_)
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+#endif
+ END_GOT
+
+/*
+ * The Hard Reset Configuration Word (HRCW) table is in the first 64
+ * (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
+ * times so the processor can fetch it out of flash whether the flash
+ * is 8, 16, 32, or 64 bits wide (hardware trickery).
+ */
+ .text
+#define _HRCW_TABLE_ENTRY(w) \
+ .fill 8,1,(((w)>>24)&0xff); \
+ .fill 8,1,(((w)>>16)&0xff); \
+ .fill 8,1,(((w)>> 8)&0xff); \
+ .fill 8,1,(((w) )&0xff)
+
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
+ _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
+
+/*
+ * Magic number and version string - put it after the HRCW since it
+ * cannot be first in flash like it is in many other processors.
+ */
+ .long 0x27051956 /* U-Boot Magic Number */
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii " ", CONFIG_IDENT_STRING, "\0"
+
+ .align 2
+
+ .globl enable_addr_trans
+enable_addr_trans:
+ /* enable address translation */
+ mfmsr r5
+ ori r5, r5, (MSR_IR | MSR_DR)
+ mtmsr r5
+ isync
+ blr
+
+ .globl disable_addr_trans
+disable_addr_trans:
+ /* disable address translation */
+ mflr r4
+ mfmsr r3
+ andi. r0, r3, (MSR_IR | MSR_DR)
+ beqlr
+ andc r3, r3, r0
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+ .globl ppcDWstore
+ppcDWstore:
+ lfd 1, 0(r4)
+ stfd 1, 0(r3)
+ blr
+
+ .globl ppcDWload
+ppcDWload:
+ lfd 1, 0(r3)
+ stfd 1, 0(r4)
+ blr
+
+#ifndef CONFIG_DEFAULT_IMMR
+#error CONFIG_DEFAULT_IMMR must be defined
+#endif /* CONFIG_SYS_DEFAULT_IMMR */
+#ifndef CONFIG_SYS_IMMR
+#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
+#endif /* CONFIG_SYS_IMMR */
+
+/*
+ * After configuration, a system reset exception is executed using the
+ * vector at offset 0x100 relative to the base set by MSR[IP]. If
+ * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
+ * base address is 0xfff00000. In the case of a Power On Reset or Hard
+ * Reset, the value of MSR[IP] is determined by the CIP field in the
+ * HRCW.
+ *
+ * Other bits in the HRCW set up the Base Address and Port Size in BR0.
+ * This determines the location of the boot ROM (flash or EPROM) in the
+ * processor's address space at boot time. As long as the HRCW is set up
+ * so that we eventually end up executing the code below when the
+ * processor executes the reset exception, the actual values used should
+ * not matter.
+ *
+ * Once we have got here, the address mask in OR0 is cleared so that the
+ * bottom 32K of the boot ROM is effectively repeated all throughout the
+ * processor's address space, after which we can jump to the absolute
+ * address at which the boot ROM was linked at compile time, and proceed
+ * to initialise the memory controller without worrying if the rug will
+ * be pulled out from under us, so to speak (it will be fine as long as
+ * we configure BR0 with the same boot ROM link address).
+ */
+ . = EXC_OFF_SYS_RESET
+
+ .globl _start
+_start: /* time t 0 */
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+
+boot_cold: /* time t 3 */
+ lis r4, CONFIG_DEFAULT_IMMR@h
+ nop
+boot_warm: /* time t 5 */
+ mfmsr r5 /* save msr contents */
+
+ /* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
+ bl 1f
+1: mflr r7
+
+ lis r3, CONFIG_SYS_IMMR@h
+ ori r3, r3, CONFIG_SYS_IMMR@l
+
+ lwz r6, IMMRBAR(r4)
+ isync
+
+ stw r3, IMMRBAR(r4)
+ lwz r6, 0(r7) /* Arbitrary external load */
+ isync
+
+ lwz r6, IMMRBAR(r3)
+ isync
+
+ /* Initialise the E300 processor core */
+ /*------------------------------------------*/
+
+#ifdef CONFIG_NAND_SPL
+ /* The FCM begins execution after only the first page
+ * is loaded. Wait for the rest before branching
+ * to another flash page.
+ */
+1: lwz r6, 0x50b0(r3)
+ andi. r6, r6, 1
+ beq 1b
+#endif
+
+ bl init_e300_core
+
+#ifdef CONFIG_SYS_FLASHBOOT
+
+ /* Inflate flash location so it appears everywhere, calculate */
+ /* the absolute address in final location of the FLASH, jump */
+ /* there and deflate the flash size back to minimal size */
+ /*------------------------------------------------------------*/
+ bl map_flash_by_law1
+ lis r4, (CONFIG_SYS_MONITOR_BASE)@h
+ ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
+ addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r5
+ blr
+in_flash:
+#if 1 /* Remapping flash with LAW0. */
+ bl remap_flash_by_law0
+#endif
+#endif /* CONFIG_SYS_FLASHBOOT */
+
+ /* setup the bats */
+ bl setup_bats
+ sync
+
+ /*
+ * Cache must be enabled here for stack-in-cache trick.
+ * This means we need to enable the BATS.
+ * This means:
+ * 1) for the EVB, original gt regs need to be mapped
+ * 2) need to have an IBAT for the 0xf region,
+ * we are running there!
+ * Cache should be turned on after BATs, since by default
+ * everything is write-through.
+ * The init-mem BAT can be reused after reloc. The old
+ * gt-regs BAT can be reused after board_init_f calls
+ * board_early_init_f (EVB only).
+ */
+ /* enable address translation */
+ bl enable_addr_trans
+ sync
+
+ /* enable the data cache */
+ bl dcache_enable
+ sync
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+ bl lock_ram_in_cache
+ sync
+#endif
+
+ /* set up the stack pointer in our newly created
+ * cache-ram (r1) */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable & stack humble */
+ /*------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ lis r3, CONFIG_SYS_IMMR@h
+ /* run low-level CPU init code (in Flash)*/
+ bl cpu_init_f
+
+ /* r3: BOOTFLAG */
+ mr r3, r21
+ /* run 1st part of board init code (in Flash)*/
+ bl board_init_f
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+#ifndef FIXME
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+#endif
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+#endif /* !CONFIG_NAND_SPL */
+
+/*
+ * This code initialises the E300 processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+ .globl init_e300_core
+init_e300_core: /* time t 10 */
+ /* Initialize machine status; enable machine check interrupt */
+ /*-----------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+
+ lis r3, CONFIG_SYS_IMMR@h
+#if defined(CONFIG_WATCHDOG)
+ /* Initialise the Wathcdog values and reset it (if req) */
+ /*------------------------------------------------------*/
+ lis r4, CONFIG_SYS_WATCHDOG_VALUE
+ ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+ stw r4, SWCRR(r3)
+
+ /* and reset it */
+
+ li r4, 0x556C
+ sth r4, SWSRR@l(r3)
+ li r4, -0x55C7
+ sth r4, SWSRR@l(r3)
+#else
+ /* Disable Wathcdog */
+ /*-------------------*/
+ lwz r4, SWCRR(r3)
+ /* Check to see if its enabled for disabling
+ once disabled by SW you can't re-enable */
+ andi. r4, r4, 0x4
+ beq 1f
+ xor r4, r4, r4
+ stw r4, SWCRR(r3)
+1:
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_MASK_AER_AO)
+ /* Write the Arbiter Event Enable to mask Address Only traps. */
+ /* This prevents the dcbz instruction from being trapped when */
+ /* HID0_ABE Address Broadcast Enable is set and the MEMORY */
+ /* COHERENCY bit is set in the WIMG bits, which is often */
+ /* needed for PCI operation. */
+ lwz r4, 0x0808(r3)
+ rlwinm r0, r4, 0, ~AER_AO
+ stw r0, 0x0808(r3)
+#endif /* CONFIG_MASK_AER_AO */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /* - force invalidation of data and instruction caches */
+ /*------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_HID0_INIT@h
+ ori r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID0_FINAL@h
+ ori r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CONFIG_SYS_HID2@h
+ ori r3, r3, CONFIG_SYS_HID2@l
+ SYNC
+ mtspr HID2, r3
+
+ /* Done! */
+ /*------------------------------*/
+ blr
+
+ /* setup_bats - set them up to some initial state */
+ .globl setup_bats
+setup_bats:
+ addis r0, r0, 0x0000
+
+ /* IBAT 0 */
+ addis r4, r0, CONFIG_SYS_IBAT0L@h
+ ori r4, r4, CONFIG_SYS_IBAT0L@l
+ addis r3, r0, CONFIG_SYS_IBAT0U@h
+ ori r3, r3, CONFIG_SYS_IBAT0U@l
+ mtspr IBAT0L, r4
+ mtspr IBAT0U, r3
+
+ /* DBAT 0 */
+ addis r4, r0, CONFIG_SYS_DBAT0L@h
+ ori r4, r4, CONFIG_SYS_DBAT0L@l
+ addis r3, r0, CONFIG_SYS_DBAT0U@h
+ ori r3, r3, CONFIG_SYS_DBAT0U@l
+ mtspr DBAT0L, r4
+ mtspr DBAT0U, r3
+
+ /* IBAT 1 */
+ addis r4, r0, CONFIG_SYS_IBAT1L@h
+ ori r4, r4, CONFIG_SYS_IBAT1L@l
+ addis r3, r0, CONFIG_SYS_IBAT1U@h
+ ori r3, r3, CONFIG_SYS_IBAT1U@l
+ mtspr IBAT1L, r4
+ mtspr IBAT1U, r3
+
+ /* DBAT 1 */
+ addis r4, r0, CONFIG_SYS_DBAT1L@h
+ ori r4, r4, CONFIG_SYS_DBAT1L@l
+ addis r3, r0, CONFIG_SYS_DBAT1U@h
+ ori r3, r3, CONFIG_SYS_DBAT1U@l
+ mtspr DBAT1L, r4
+ mtspr DBAT1U, r3
+
+ /* IBAT 2 */
+ addis r4, r0, CONFIG_SYS_IBAT2L@h
+ ori r4, r4, CONFIG_SYS_IBAT2L@l
+ addis r3, r0, CONFIG_SYS_IBAT2U@h
+ ori r3, r3, CONFIG_SYS_IBAT2U@l
+ mtspr IBAT2L, r4
+ mtspr IBAT2U, r3
+
+ /* DBAT 2 */
+ addis r4, r0, CONFIG_SYS_DBAT2L@h
+ ori r4, r4, CONFIG_SYS_DBAT2L@l
+ addis r3, r0, CONFIG_SYS_DBAT2U@h
+ ori r3, r3, CONFIG_SYS_DBAT2U@l
+ mtspr DBAT2L, r4
+ mtspr DBAT2U, r3
+
+ /* IBAT 3 */
+ addis r4, r0, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ addis r3, r0, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+
+ /* DBAT 3 */
+ addis r4, r0, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ addis r3, r0, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+
+#ifdef CONFIG_HIGH_BATS
+ /* IBAT 4 */
+ addis r4, r0, CONFIG_SYS_IBAT4L@h
+ ori r4, r4, CONFIG_SYS_IBAT4L@l
+ addis r3, r0, CONFIG_SYS_IBAT4U@h
+ ori r3, r3, CONFIG_SYS_IBAT4U@l
+ mtspr IBAT4L, r4
+ mtspr IBAT4U, r3
+
+ /* DBAT 4 */
+ addis r4, r0, CONFIG_SYS_DBAT4L@h
+ ori r4, r4, CONFIG_SYS_DBAT4L@l
+ addis r3, r0, CONFIG_SYS_DBAT4U@h
+ ori r3, r3, CONFIG_SYS_DBAT4U@l
+ mtspr DBAT4L, r4
+ mtspr DBAT4U, r3
+
+ /* IBAT 5 */
+ addis r4, r0, CONFIG_SYS_IBAT5L@h
+ ori r4, r4, CONFIG_SYS_IBAT5L@l
+ addis r3, r0, CONFIG_SYS_IBAT5U@h
+ ori r3, r3, CONFIG_SYS_IBAT5U@l
+ mtspr IBAT5L, r4
+ mtspr IBAT5U, r3
+
+ /* DBAT 5 */
+ addis r4, r0, CONFIG_SYS_DBAT5L@h
+ ori r4, r4, CONFIG_SYS_DBAT5L@l
+ addis r3, r0, CONFIG_SYS_DBAT5U@h
+ ori r3, r3, CONFIG_SYS_DBAT5U@l
+ mtspr DBAT5L, r4
+ mtspr DBAT5U, r3
+
+ /* IBAT 6 */
+ addis r4, r0, CONFIG_SYS_IBAT6L@h
+ ori r4, r4, CONFIG_SYS_IBAT6L@l
+ addis r3, r0, CONFIG_SYS_IBAT6U@h
+ ori r3, r3, CONFIG_SYS_IBAT6U@l
+ mtspr IBAT6L, r4
+ mtspr IBAT6U, r3
+
+ /* DBAT 6 */
+ addis r4, r0, CONFIG_SYS_DBAT6L@h
+ ori r4, r4, CONFIG_SYS_DBAT6L@l
+ addis r3, r0, CONFIG_SYS_DBAT6U@h
+ ori r3, r3, CONFIG_SYS_DBAT6U@l
+ mtspr DBAT6L, r4
+ mtspr DBAT6U, r3
+
+ /* IBAT 7 */
+ addis r4, r0, CONFIG_SYS_IBAT7L@h
+ ori r4, r4, CONFIG_SYS_IBAT7L@l
+ addis r3, r0, CONFIG_SYS_IBAT7U@h
+ ori r3, r3, CONFIG_SYS_IBAT7U@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+
+ /* DBAT 7 */
+ addis r4, r0, CONFIG_SYS_DBAT7L@h
+ ori r4, r4, CONFIG_SYS_DBAT7L@l
+ addis r3, r0, CONFIG_SYS_DBAT7U@h
+ ori r3, r3, CONFIG_SYS_DBAT7U@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+#endif
+
+ isync
+
+ /* invalidate all tlb's
+ *
+ * From the 603e User Manual: "The 603e provides the ability to
+ * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
+ * instruction invalidates the TLB entry indexed by the EA, and
+ * operates on both the instruction and data TLBs simultaneously
+ * invalidating four TLB entries (both sets in each TLB). The
+ * index corresponds to bits 15-19 of the EA. To invalidate all
+ * entries within both TLBs, 32 tlbie instructions should be
+ * issued, incrementing this field by one each time."
+ *
+ * "Note that the tlbia instruction is not implemented on the
+ * 603e."
+ *
+ * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
+ * incrementing by 0x1000 each time. The code below is sort of
+ * based on code in "flush_tlbs" from arch/powerpc/kernel/head.S
+ *
+ */
+ lis r3, 0
+ lis r5, 2
+
+1:
+ tlbie r3
+ addi r3, r3, 0x1000
+ cmp 0, 0, r3, r5
+ blt 1b
+
+ blr
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ li r4, HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r4
+ isync
+ mtspr HID0, r3 /* clears invalidate, enable and lock */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ ori r3, r3, HID0_DCE
+ sync
+ mtspr HID0, r3 /* enable, no invalidate */
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mflr r4
+ bl flush_dcache /* uses r3 and r5 */
+ mfspr r3, HID0
+ li r5, HID0_DCE|HID0_DLOCK
+ andc r3, r3, r5
+ ori r5, r3, HID0_DCFI
+ sync
+ mtspr HID0, r5 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ mtlr r4
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
+ blr
+
+ .globl flush_dcache
+flush_dcache:
+ lis r3, 0
+ lis r5, CONFIG_SYS_CACHELINE_SIZE
+1: cmp 0, 1, r3, r5
+ bge 2f
+ lwz r5, 0(r3)
+ lis r5, CONFIG_SYS_CACHELINE_SIZE
+ addi r3, r3, 0x4
+ b 1b
+2: blr
+
+/*-------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__bss_start)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
+ * + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* copy */
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+
+ addi r0,r5,3
+ srwi. r0,r0,2
+ mtctr r0
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* and compare */
+20: lwzu r20,4(r8)
+ lwzu r21,4(r7)
+ xor. r22, r20, r21
+ bne 30f
+ bdnz 20b
+ b 4f
+
+ /* compare failed */
+30: li r3, 0
+ blr
+
+2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+#ifndef CONFIG_NAND_SPL
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+#endif
+
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+#if defined(CONFIG_HYMOD)
+ /*
+ * For HYMOD - the environment is the very last item in flash.
+ * The real .bss stops just before environment starts, so only
+ * clear up to that point.
+ *
+ * taken from mods for FADS board
+ */
+ lwz r4,GOT(environment)
+#else
+ lwz r4,GOT(_end)
+#endif
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+#ifndef CONFIG_NAND_SPL
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
+
+#endif /* !CONFIG_NAND_SPL */
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+lock_ram_in_cache:
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1:
+ dcbz r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+
+ /* Lock the data cache */
+ mfspr r0, HID0
+ ori r0, r0, HID0_DLOCK
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+
+#ifndef CONFIG_NAND_SPL
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1: icbi r0, r3
+ dcbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+
+ /* Unlock the data cache and invalidate it */
+ mfspr r3, HID0
+ li r5, HID0_DLOCK|HID0_DCFI
+ andc r3, r3, r5 /* no invalidate, unlock */
+ ori r5, r3, HID0_DCFI /* invalidate, unlock */
+ sync
+ mtspr HID0, r5 /* invalidate, unlock */
+ sync
+ mtspr HID0, r3 /* no invalidate, unlock */
+ blr
+#endif /* !CONFIG_NAND_SPL */
+#endif /* CONFIG_SYS_INIT_RAM_LOCK */
+
+#ifdef CONFIG_SYS_FLASHBOOT
+map_flash_by_law1:
+ /* When booting from ROM (Flash or EPROM), clear the */
+ /* Address Mask in OR0 so ROM appears everywhere */
+ /*----------------------------------------------------*/
+ lis r3, (CONFIG_SYS_IMMR)@h /* r3 <= CONFIG_SYS_IMMR */
+ lwz r4, OR0@l(r3)
+ li r5, 0x7fff /* r5 <= 0x00007FFFF */
+ and r4, r4, r5
+ stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
+
+ /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
+ * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
+ * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
+ * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
+ * 0xFF800. From the hard resetting to here, the processor fetched and
+ * executed the instructions one by one. There is not absolutely
+ * jumping happened. Laterly, the u-boot code has to do an absolutely
+ * jumping to tell the CPU instruction fetching component what the
+ * u-boot TEXT base address is. Because the TEXT base resides in the
+ * boot ROM memory space, to garantee the code can run smoothly after
+ * that jumping, we must map in the entire boot ROM by Local Access
+ * Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
+ * address for boot ROM, such as 0xFE000000. In this case, the default
+ * LBIU Local Access Widow 0 will not cover this memory space. So, we
+ * need another window to map in it.
+ */
+ lis r4, (CONFIG_SYS_FLASH_BASE)@h
+ ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
+ stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
+
+ /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CONFIG_SYS_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+
+ stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ blr
+
+ /* Though all the LBIU Local Access Windows and LBC Banks will be
+ * initialized in the C code, we'd better configure boot ROM's
+ * window 0 and bank 0 correctly at here.
+ */
+remap_flash_by_law0:
+ /* Initialize the BR0 with the boot ROM starting address. */
+ lwz r4, BR0(r3)
+ li r5, 0x7FFF
+ and r4, r4, r5
+ lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
+ ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
+ or r5, r5, r4
+ stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
+
+ lwz r4, OR0(r3)
+ lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
+ or r4, r4, r5
+ stw r4, OR0(r3)
+
+ lis r4, (CONFIG_SYS_FLASH_BASE)@h
+ ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
+ stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
+
+ /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CONFIG_SYS_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
+
+
+ xor r4, r4, r4
+ stw r4, LBLAWBAR1(r3)
+ stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
+ blr
+#endif /* CONFIG_SYS_FLASHBOOT */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware
+ * exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+#include <asm/mpc8349_pci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ puts ("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ putc ('\n');
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ putc ('\n');
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ putc ('\n');
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ putc ('\n');
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+#ifdef CONFIG_PCI
+void dump_pci (void)
+{
+/*
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ printf ("PCI: err status %x err mask %x err ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_esr),
+ le32_to_cpu (immap->im_pci.pci_emr),
+ le32_to_cpu (immap->im_pci.pci_ecr));
+ printf (" error address %x error data %x ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_eacr),
+ le32_to_cpu (immap->im_pci.pci_edcr),
+ le32_to_cpu (immap->im_pci.pci_eccr));
+*/
+}
+#endif
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+#ifdef CONFIG_PCI
+#if 0
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+#ifdef DEBUG
+ dump_pci();
+#endif
+ /* clear the error in the error status register */
+ if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+ immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
+ return;
+ }
+#endif
+#endif /* CONFIG_PCI */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ puts ("Machine check in kernel mode.\n"
+ "Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ puts ("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ puts ("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ puts ("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ puts ("Address parity signal\n");
+ break;
+ default:
+ puts ("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+#ifdef CONFIG_PCI
+ dump_pci();
+#endif
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ arch/powerpc/cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2002,2003 Motorola Inc.
+# Xianghua Xiao,X.Xiao@motorola.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o resetvec.o
+SOBJS-$(CONFIG_MP) += release.o
+SOBJS = $(SOBJS-y)
+
+COBJS-$(CONFIG_CPM2) += commproc.o
+
+# supports ddr1
+COBJS-$(CONFIG_MPC8540) += ddr-gen1.o
+COBJS-$(CONFIG_MPC8560) += ddr-gen1.o
+COBJS-$(CONFIG_MPC8541) += ddr-gen1.o
+COBJS-$(CONFIG_MPC8555) += ddr-gen1.o
+
+# supports ddr1/2
+COBJS-$(CONFIG_MPC8548) += ddr-gen2.o
+COBJS-$(CONFIG_MPC8568) += ddr-gen2.o
+COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
+
+# supports ddr1/2/3
+COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
+COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
+COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
+COBJS-$(CONFIG_P1011) += ddr-gen3.o
+COBJS-$(CONFIG_P1012) += ddr-gen3.o
+COBJS-$(CONFIG_P1013) += ddr-gen3.o
+COBJS-$(CONFIG_P1020) += ddr-gen3.o
+COBJS-$(CONFIG_P1021) += ddr-gen3.o
+COBJS-$(CONFIG_P1022) += ddr-gen3.o
+COBJS-$(CONFIG_P2010) += ddr-gen3.o
+COBJS-$(CONFIG_P2020) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
+
+COBJS-$(CONFIG_CPM2) += ether_fcc.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_MP) += mp.o
+COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS-$(CONFIG_QE) += qe_io.o
+COBJS-$(CONFIG_CPM2) += serial_scc.o
+
+COBJS = $(COBJS-y)
+COBJS += cpu.o
+COBJS += cpu_init.o
+COBJS += cpu_init_early.o
+COBJS += interrupts.o
+COBJS += speed.o
+COBJS += tlb.o
+COBJS += traps.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Adapted for Motorola MPC8560 chips
+ * Xianghua Xiao <x.xiao@motorola.com>
+ *
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
+ * copyright notice:
+ *
+ * General Purpose functions for the global management of the
+ * 8220 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ * Copyright (c) 2003 Motorola,Inc.
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <common.h>
+#include <asm/cpm_85xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * because we have stack and init data in dual port ram
+ * we must reduce the size
+ */
+#undef CPM_DATAONLY_SIZE
+#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+
+void
+m8560_cpm_reset(void)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile ulong count;
+
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Reclaim the DP memory for our use.
+ */
+ gd->dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+
+ /*
+ * Reset CPM
+ */
+ cpm->im_cpm_cp.cpcr = CPM_CR_RST;
+ count = 0;
+ do { /* Spin until command processed */
+ __asm__ __volatile__ ("eieio");
+ } while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
+}
+
+/* Allocate some memory from the dual ported ram.
+ * To help protocols with object alignment restrictions, we do that
+ * if they ask.
+ */
+uint
+m8560_cpm_dpalloc(uint size, uint align)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ align_mask = align - 1;
+ savebase = gd->dp_alloc_base;
+
+ if ((off = (gd->dp_alloc_base & align_mask)) != 0)
+ gd->dp_alloc_base += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += align - off;
+
+ if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
+ gd->dp_alloc_base = savebase;
+ panic("m8560_cpm_dpalloc: ran out of dual port ram!");
+ }
+
+ retloc = gd->dp_alloc_base;
+ gd->dp_alloc_base += size;
+
+ memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
+
+ return(retloc);
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8560_cpm_hostalloc(uint size, uint align)
+{
+ /* the host might not even have RAM yet - just use dual port RAM */
+ return (m8560_cpm_dpalloc(size, align));
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK gd->brg_clk
+#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+m8560_cpm_setbrg(uint brg, uint rate)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
+ }
+ else {
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+m8560_cpm_fastbrg(uint brg, uint rate, int div16)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
+ }
+ else {
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (div16)
+ *bp |= CPM_BRG_DIV16;
+}
+
+/* This function is used to set baud rate generators using an external
+ * clock source and 16x oversampling.
+ */
+
+void
+m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile uint *bp;
+
+ if (brg < 4) {
+ bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
+ }
+ else {
+ bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (pinsel == 0)
+ *bp |= CPM_BRG_EXTC_CLK3_9;
+ else
+ *bp |= CPM_BRG_EXTC_CLK5_15;
+}
+
+#ifdef CONFIG_POST
+
+void post_word_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
+
+ *save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
+
+ return *save_addr;
+}
+
+#endif /* CONFIG_POST */
--- /dev/null
+#
+# (C) Copyright 2002,2003 Motorola Inc.
+# Xianghua Xiao, X.Xiao@motorola.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
+
+# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
+# see "[PATCH,rs6000] make -mno-spe work as expected" on
+# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
+PLATFORM_CPPFLAGS +=$(call cc-option,-mspe=yes)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc85xx/u-boot.lds
--- /dev/null
+/*
+ * Copyright 2004,2007-2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2002, 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <fsl_esdhc.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ sys_info_t sysinfo;
+ uint pvr, svr;
+ uint fam;
+ uint ver;
+ uint major, minor;
+ struct cpu_type *cpu;
+ char buf1[32], buf2[32];
+#ifdef CONFIG_DDR_CLK_FREQ
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#else
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+#endif
+#else
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = 0;
+#else
+ u32 ddr_ratio = 0;
+#endif
+#endif /* CONFIG_DDR_CLK_FREQ */
+ int i;
+
+ svr = get_svr();
+ major = SVR_MAJ(svr);
+#ifdef CONFIG_MPC8536
+ major &= 0x7; /* the msb of this nibble is a mfg code */
+#endif
+ minor = SVR_MIN(svr);
+
+ if (cpu_numcores() > 1) {
+#ifndef CONFIG_MP
+ puts("Unicore software on multiprocessor system!!\n"
+ "To enable mutlticore build define CONFIG_MP\n");
+#endif
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ printf("CPU%d: ", pic->whoami);
+ } else {
+ puts("CPU: ");
+ }
+
+ cpu = gd->cpu;
+
+ puts(cpu->name);
+ if (IS_E_PROCESSOR(svr))
+ puts("E");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+ pvr = get_pvr();
+ fam = PVR_FAM(pvr);
+ ver = PVR_VER(pvr);
+ major = PVR_MAJ(pvr);
+ minor = PVR_MIN(pvr);
+
+ printf("Core: ");
+ switch (fam) {
+ case PVR_FAM(PVR_85xx):
+ puts("E500");
+ break;
+ default:
+ puts("Unknown");
+ break;
+ }
+
+ if (PVR_MEM(pvr) == 0x03)
+ puts("MC");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+
+ get_sys_info(&sysinfo);
+
+ puts("Clock Configuration:");
+ for (i = 0; i < cpu_numcores(); i++) {
+ if (!(i & 3))
+ printf ("\n ");
+ printf("CPU%d:%-4s MHz, ",
+ i,strmhz(buf1, sysinfo.freqProcessor[i]));
+ }
+ printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+
+#ifdef CONFIG_FSL_CORENET
+ if (ddr_sync == 1) {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ } else {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ }
+#else
+ switch (ddr_ratio) {
+ case 0x0:
+ printf(" DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ case 0x7:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ default:
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ break;
+ }
+#endif
+
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ } else {
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freqLocalBus);
+ }
+
+#ifdef CONFIG_CPM2
+ printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+#endif
+
+#ifdef CONFIG_QE
+ printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
+ printf(" FMAN%d: %s MHz\n", i,
+ strmhz(buf1, sysinfo.freqFMan[i]));
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+#endif
+
+ puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+/* Everything after the first generation of PQ3 parts has RSTCR */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
+ unsigned long val, msr;
+
+ /*
+ * Initiate hard reset in debug control register DBCR0
+ * Make sure MSR[DE] = 1. This only resets the core.
+ */
+ msr = mfmsr ();
+ msr |= MSR_DE;
+ mtmsr (msr);
+
+ val = mfspr(DBCR0);
+ val |= 0x70000000;
+ mtspr(DBCR0,val);
+#else
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */
+ udelay(100);
+#endif
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+#ifdef CONFIG_FSL_CORENET
+ return (gd->bus_clk + 8) / 16;
+#else
+ return (gd->bus_clk + 4UL)/8UL;
+#endif
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void
+watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+ reset_85xx_watchdog();
+ if (re_enable) enable_interrupts();
+}
+
+void
+reset_85xx_watchdog(void)
+{
+ /*
+ * Clear TSR(WIS) bit by writing 1
+ */
+ unsigned long val;
+ val = mfspr(SPRN_TSR);
+ val |= TSR_WIS;
+ mtspr(SPRN_TSR, val);
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
+ */
+void upmconfig (uint upm, uint * table, uint size)
+{
+ int i, mdr, mad, old_mad = 0;
+ volatile u32 *mxmr;
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ volatile u32 *brp,*orp;
+ volatile u8* dummy = NULL;
+ int upmmask;
+
+ switch (upm) {
+ case UPMA:
+ mxmr = &lbc->mamr;
+ upmmask = BR_MS_UPMA;
+ break;
+ case UPMB:
+ mxmr = &lbc->mbmr;
+ upmmask = BR_MS_UPMB;
+ break;
+ case UPMC:
+ mxmr = &lbc->mcmr;
+ upmmask = BR_MS_UPMC;
+ break;
+ default:
+ printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
+ hang();
+ }
+
+ /* Find the address for the dummy write transaction */
+ for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
+ i++, brp += 2, orp += 2) {
+
+ /* Look for a valid BR with selected UPM */
+ if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
+ dummy = (volatile u8*)(in_be32(brp) & BR_BA);
+ break;
+ }
+ }
+
+ if (i == 8) {
+ printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+ hang();
+ }
+
+ for (i = 0; i < size; i++) {
+ /* 1 */
+ out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
+ /* 2 */
+ out_be32(&lbc->mdr, table[i]);
+ /* 3 */
+ mdr = in_be32(&lbc->mdr);
+ /* 4 */
+ *(volatile u8 *)dummy = 0;
+ /* 5 */
+ do {
+ mad = in_be32(mxmr) & MxMR_MAD_MSK;
+ } while (mad <= old_mad && !(!mad && i == (size-1)));
+ old_mad = mad;
+ }
+ out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
+}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}
--- /dev/null
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2003 Motorola Inc.
+ * Modified by Xianghua Xiao, X.Xiao@motorola.com
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/processor.h>
+#include <ioports.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_MPC8536
+extern void fsl_serdes_init(void);
+#endif
+
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+ int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+ u8 port, pin;
+ int dir, open_drain, assign;
+ int i;
+
+ for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+ port = qe_iop_conf_tab[i].port;
+ pin = qe_iop_conf_tab[i].pin;
+ dir = qe_iop_conf_tab[i].dir;
+ open_drain = qe_iop_conf_tab[i].open_drain;
+ assign = qe_iop_conf_tab[i].assign;
+ qe_config_iopin(port, pin, dir, open_drain, assign);
+ }
+}
+#endif
+
+#ifdef CONFIG_CPM2
+void config_8560_ioports (volatile ccsr_cpm_t * cpm)
+{
+ int portnum;
+
+ for (portnum = 0; portnum < 4; portnum++) {
+ uint pmsk = 0,
+ ppar = 0,
+ psor = 0,
+ pdir = 0,
+ podr = 0,
+ pdat = 0;
+ iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
+ iop_conf_t *eiopc = iopc + 32;
+ uint msk = 1;
+
+ /*
+ * NOTE:
+ * index 0 refers to pin 31,
+ * index 31 refers to pin 0
+ */
+ while (iopc < eiopc) {
+ if (iopc->conf) {
+ pmsk |= msk;
+ if (iopc->ppar)
+ ppar |= msk;
+ if (iopc->psor)
+ psor |= msk;
+ if (iopc->pdir)
+ pdir |= msk;
+ if (iopc->podr)
+ podr |= msk;
+ if (iopc->pdat)
+ pdat |= msk;
+ }
+
+ msk <<= 1;
+ iopc++;
+ }
+
+ if (pmsk != 0) {
+ volatile ioport_t *iop = ioport_addr (cpm, portnum);
+ uint tpmsk = ~pmsk;
+
+ /*
+ * the (somewhat confused) paragraph at the
+ * bottom of page 35-5 warns that there might
+ * be "unknown behaviour" when programming
+ * PSORx and PDIRx, if PPARx = 1, so I
+ * decided this meant I had to disable the
+ * dedicated function first, and enable it
+ * last.
+ */
+ iop->ppar &= tpmsk;
+ iop->psor = (iop->psor & tpmsk) | psor;
+ iop->podr = (iop->podr & tpmsk) | podr;
+ iop->pdat = (iop->pdat & tpmsk) | pdat;
+ iop->pdir = (iop->pdir & tpmsk) | pdir;
+ iop->ppar |= ppar;
+ }
+ }
+}
+#endif
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map
+ * initialize a bunch of registers
+ */
+
+#ifdef CONFIG_FSL_CORENET
+static void corenet_tb_init(void)
+{
+ volatile ccsr_rcpm_t *rcpm =
+ (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
+ volatile ccsr_pic_t *pic =
+ (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ u32 whoami = in_be32(&pic->whoami);
+
+ /* Enable the timebase register for this core */
+ out_be32(&rcpm->ctbenrl, (1 << whoami));
+}
+#endif
+
+void cpu_init_f (void)
+{
+ volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ extern void m8560_cpm_reset (void);
+#ifdef CONFIG_MPC8548
+ ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+ uint svr = get_svr();
+
+ /*
+ * CPU2 errata workaround: A core hang possible while executing
+ * a msync instruction and a snoopable transaction from an I/O
+ * master tagged to make quick forward progress is present.
+ * Fixed in silicon rev 2.1.
+ */
+ if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
+ out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
+#endif
+
+ disable_tlb(14);
+ disable_tlb(15);
+
+#ifdef CONFIG_CPM2
+ config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
+#endif
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+#if defined(CONFIG_SYS_OR0_REMAP)
+ memctl->or0 = CONFIG_SYS_OR0_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+ memctl->or1 = CONFIG_SYS_OR1_REMAP;
+#endif
+
+ /* now restrict to preliminary range */
+ /* if cs1 is already set via debugger, leave cs0/cs1 alone */
+ if (! memctl->br1 & 1) {
+#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
+ memctl->br0 = CONFIG_SYS_BR0_PRELIM;
+ memctl->or0 = CONFIG_SYS_OR0_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ memctl->or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+ }
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ memctl->or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ memctl->or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ memctl->or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->br4 = CONFIG_SYS_BR4_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ memctl->or5 = CONFIG_SYS_OR5_PRELIM;
+ memctl->br5 = CONFIG_SYS_BR5_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ memctl->or6 = CONFIG_SYS_OR6_PRELIM;
+ memctl->br6 = CONFIG_SYS_BR6_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ memctl->or7 = CONFIG_SYS_OR7_PRELIM;
+ memctl->br7 = CONFIG_SYS_BR7_PRELIM;
+#endif
+
+#if defined(CONFIG_CPM2)
+ m8560_cpm_reset();
+#endif
+#ifdef CONFIG_QE
+ /* Config QE ioports */
+ config_qe_ioports();
+#endif
+#if defined(CONFIG_MPC8536)
+ fsl_serdes_init();
+#endif
+#if defined(CONFIG_FSL_DMA)
+ dma_init();
+#endif
+#ifdef CONFIG_FSL_CORENET
+ corenet_tb_init();
+#endif
+ init_used_tlb_cams();
+}
+
+
+/*
+ * Initialize L2 as cache.
+ *
+ * The newer 8548, etc, parts have twice as much cache, but
+ * use the same bit-encoding as the older 8555, etc, parts.
+ *
+ */
+
+int cpu_init_r(void)
+{
+ puts ("L2: ");
+
+#if defined(CONFIG_L2_CACHE)
+ volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ volatile uint cache_ctl;
+ uint svr, ver;
+ uint l2srbar;
+ u32 l2siz_field;
+
+ svr = get_svr();
+ ver = SVR_SOC_VER(svr);
+
+ asm("msync;isync");
+ cache_ctl = l2cache->l2ctl;
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ if (cache_ctl & MPC85xx_L2CTL_L2E) {
+ /* Clear L2 SRAM memory-mapped base address */
+ out_be32(&l2cache->l2srbar0, 0x0);
+ out_be32(&l2cache->l2srbar1, 0x0);
+
+ /* set MBECCDIS=0, SBECCDIS=0 */
+ clrbits_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC |
+ MPC85xx_L2ERRDIS_SBECC));
+
+ /* set L2E=0, L2SRAM=0 */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ }
+#endif
+
+ l2siz_field = (cache_ctl >> 28) & 0x3;
+
+ switch (l2siz_field) {
+ case 0x0:
+ printf(" unknown size (0x%08x)\n", cache_ctl);
+ return -1;
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("128 KB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ cache_ctl = 0xc4000000;
+ } else {
+ puts("256 KB ");
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("256 KB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ cache_ctl = 0xc8000000;
+ } else {
+ puts ("512 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
+ }
+ break;
+ case 0x3:
+ puts("1024 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
+ break;
+ }
+
+ if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
+ puts("already enabled");
+ l2srbar = l2cache->l2srbar0;
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+ if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
+ && l2srbar >= CONFIG_SYS_FLASH_BASE) {
+ l2srbar = CONFIG_SYS_INIT_L2_ADDR;
+ l2cache->l2srbar0 = l2srbar;
+ printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
+ }
+#endif /* CONFIG_SYS_INIT_L2_ADDR */
+ puts("\n");
+ } else {
+ asm("msync;isync");
+ l2cache->l2ctl = cache_ctl; /* invalidate & enable */
+ asm("msync;isync");
+ puts("enabled\n");
+ }
+#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+ u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+
+ /* invalidate the L2 cache */
+ mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
+ while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
+ ;
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ mtspr(SPRN_L2CSR1, (32 + 1));
+#endif
+
+ /* enable the cache */
+ mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
+
+ if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
+ while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
+ ;
+ printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+ }
+#else
+ puts("disabled\n");
+#endif
+#ifdef CONFIG_QE
+ uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+ qe_init(qe_base);
+ qe_reset();
+#endif
+
+#if defined(CONFIG_MP)
+ setup_mp();
+#endif
+ return 0;
+}
+
+extern void setup_ivors(void);
+
+void arch_preboot_os(void)
+{
+ u32 msr;
+
+ /*
+ * We are changing interrupt offsets and are about to boot the OS so
+ * we need to make sure we disable all async interrupts. EE is already
+ * disabled by the time we get called.
+ */
+ msr = mfmsr();
+ msr &= ~(MSR_ME|MSR_CE|MSR_DE);
+ mtmsr(msr);
+
+ setup_ivors();
+}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+#ifdef CONFIG_FSL_CORENET
+static void setup_ccsrbar(void)
+{
+ u32 temp;
+ volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
+ volatile ccsr_local_t *ccm;
+
+ /*
+ * We can't call set_law() because we haven't moved
+ * CCSR yet.
+ */
+ ccm = (void *)ccsr_virt;
+
+ out_be32(&ccm->law[0].lawbarh,
+ (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
+ out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
+ out_be32(&ccm->law[0].lawar,
+ LAW_EN | (0x1e << 20) | LAW_SIZE_4K);
+
+ in_be32((u32 *)(ccsr_virt + 0));
+ in_be32((u32 *)(ccsr_virt + 1));
+ isync();
+
+ ccm = (void *)CONFIG_SYS_CCSRBAR;
+ /* Now use the temporary LAW to move CCSR */
+ out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
+ out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
+ out_be32(&ccm->ccsrar, CCSRAR_C);
+ temp = in_be32(&ccm->ccsrar);
+ disable_law(0);
+}
+#else
+static void setup_ccsrbar(void)
+{
+ u32 temp;
+ volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
+
+ temp = in_be32(ccsr_virt);
+ out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
+ temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
+}
+#endif
+#endif
+
+/* We run cpu_init_early_f in AS = 1 */
+void cpu_init_early_f(void)
+{
+ u32 mas0, mas1, mas2, mas3, mas7;
+ int i;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /*
+ * Clear initial global data
+ * we don't use memset so we can share this code with NAND_SPL
+ */
+ for (i = 0; i < sizeof(gd_t); i++)
+ ((char *)gd)[i] = 0;
+
+ mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0);
+ mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+ mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
+ mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
+
+ write_tlb(mas0, mas1, mas2, mas3, mas7);
+
+ /* set up CCSR if we want it moved */
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+ mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
+ /* mas1 is the same as above */
+ mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
+ mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
+
+ write_tlb(mas0, mas1, mas2, mas3, mas7);
+
+ setup_ccsrbar();
+#endif
+
+ init_laws();
+ invalidate_tlb(0);
+ init_tlbs();
+}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+void cpu_init_f(void)
+{
+ ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+
+ /*
+ * LCRR - Clock Ratio Register - set up local bus timing
+ * when needed
+ */
+ out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
+
+#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
+ out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
+ out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
+#else
+#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ char *l2srbar;
+ int i;
+
+ out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
+
+ /* set MBECCDIS=1, SBECCDIS=1 */
+ out_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
+
+ /* set L2E=1 & L2SRAM=001 */
+ out_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
+
+ /* Initialize L2 SRAM to zero */
+ l2srbar = (char *)CONFIG_SYS_INIT_L2_ADDR;
+ for (i = 0; i < CONFIG_SYS_L2_SIZE; i++)
+ l2srbar[i] = 0;
+#endif
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+
+ if (ctrl_num != 0) {
+ printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+ return;
+ }
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i == 0) {
+ out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+ } else if (i == 1) {
+ out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+ } else if (i == 2) {
+ out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+ } else if (i == 3) {
+ out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs3_config, regs->cs[i].config);
+ }
+ }
+
+ out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+ out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
+ out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+#endif
+
+ /*
+ * 200 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ */
+ udelay(200);
+ asm volatile("sync;isync");
+
+ out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+ asm("sync;isync;msync");
+ udelay(500);
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+
+void
+ddr_enable_ecc(unsigned int dram_size)
+{
+ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+ dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
+
+ /*
+ * Enable errors for ECC.
+ */
+ debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
+ ddr->err_disable = 0x00000000;
+ asm("sync;isync;msync");
+ debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
+}
+
+#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+
+ if (ctrl_num) {
+ printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+ return;
+ }
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i == 0) {
+ out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+ } else if (i == 1) {
+ out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+ } else if (i == 2) {
+ out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+ } else if (i == 3) {
+ out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs3_config, regs->cs[i].config);
+ }
+ }
+
+ out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+ out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+ out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+ out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+ out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+ out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+ /*
+ * 200 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ */
+ udelay(200);
+ asm volatile("sync;isync");
+
+ out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+ /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
+ while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+ udelay(10000); /* throttle polling rate */
+ }
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ volatile ccsr_ddr_t *ddr;
+ u32 temp_sdram_cfg;
+
+ switch (ctrl_num) {
+ case 0:
+ ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ break;
+ case 1:
+ ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ break;
+ default:
+ printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+ return;
+ }
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i == 0) {
+ out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs0_config, regs->cs[i].config);
+ out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
+
+ } else if (i == 1) {
+ out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs1_config, regs->cs[i].config);
+ out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
+
+ } else if (i == 2) {
+ out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs2_config, regs->cs[i].config);
+ out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
+
+ } else if (i == 3) {
+ out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs3_config, regs->cs[i].config);
+ out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
+ }
+ }
+
+ out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+ out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+ out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+ out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+ out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+ out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+ out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
+ out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
+ out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+ out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
+ out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
+ out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
+
+ /* Set, but do not enable the memory */
+ temp_sdram_cfg = regs->ddr_sdram_cfg;
+ temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
+ out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
+ /*
+ * For 8572 DDR1 erratum - DDR controller may enter illegal state
+ * when operatiing in 32-bit bus mode with 4-beat bursts,
+ * This erratum does not affect DDR3 mode, only for DDR2 mode.
+ */
+#ifdef CONFIG_MPC8572
+ if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
+ && in_be32(&ddr->sdram_cfg) & 0x80000) {
+ /* set DEBUG_1[31] */
+ u32 temp = in_be32(&ddr->debug_1);
+ out_be32(&ddr->debug_1, temp | 1);
+ }
+#endif
+
+ /*
+ * 500 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ * DDR2 need 200 us, and DDR3 need 500 us from spec,
+ * we choose the max, that is 500 us for all of case.
+ */
+ udelay(500);
+ asm volatile("sync;isync");
+
+ /* Let the controller go */
+ temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
+ out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+
+ /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
+ while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+ udelay(10000); /* throttle polling rate */
+ }
+}
--- /dev/null
+/*
+ * MPC8560 FCC Fast Ethernet
+ * Copyright (c) 2003 Motorola,Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8560 FCC Fast Ethernet
+ * Basic ET HW initialization and packet RX/TX routines
+ *
+ * This code will not perform the IO port configuration. This should be
+ * done in the iop_conf_t structure specific for the board.
+ *
+ * TODO:
+ * add a PHY driver to do the negotiation
+ * reflect negotiation results in FPSMR
+ * look for ways to configure the board specific stuff elsewhere, eg.
+ * config_xxx.h or the board directory
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/cpm_85xx.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+#endif
+
+#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
+ defined(CONFIG_NET_MULTI)
+
+static struct ether_fcc_info_s
+{
+ int ether_index;
+ int proff_enet;
+ ulong cpm_cr_enet_sblock;
+ ulong cpm_cr_enet_page;
+ ulong cmxfcr_mask;
+ ulong cmxfcr_value;
+}
+ ether_fcc_info[] =
+{
+#ifdef CONFIG_ETHER_ON_FCC1
+{
+ 0,
+ PROFF_FCC1,
+ CPM_CR_FCC1_SBLOCK,
+ CPM_CR_FCC1_PAGE,
+ CONFIG_SYS_CMXFCR_MASK1,
+ CONFIG_SYS_CMXFCR_VALUE1
+},
+#endif
+
+#ifdef CONFIG_ETHER_ON_FCC2
+{
+ 1,
+ PROFF_FCC2,
+ CPM_CR_FCC2_SBLOCK,
+ CPM_CR_FCC2_PAGE,
+ CONFIG_SYS_CMXFCR_MASK2,
+ CONFIG_SYS_CMXFCR_VALUE2
+},
+#endif
+
+#ifdef CONFIG_ETHER_ON_FCC3
+{
+ 2,
+ PROFF_FCC3,
+ CPM_CR_FCC3_SBLOCK,
+ CPM_CR_FCC3_PAGE,
+ CONFIG_SYS_CMXFCR_MASK3,
+ CONFIG_SYS_CMXFCR_VALUE3
+},
+#endif
+};
+
+/*---------------------------------------------------------------------*/
+
+/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
+#define PKT_MAXDMA_SIZE 1520
+
+/* The FCC stores dest/src/type, data, and checksum for receive packets. */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+
+/* Maximum input buffer size. Must be a multiple of 32. */
+#define PKT_MAXBLR_SIZE 1536
+
+#define TOUT_LOOP 1000000
+
+#define TX_BUF_CNT 2
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FCC Ethernet Tx and Rx buffer descriptors.
+ * Provide for Double Buffering
+ * Note: PKTBUFSRX is defined in net.h
+ */
+
+typedef volatile struct rtxbd {
+ cbd_t rxbd[PKTBUFSRX];
+ cbd_t txbd[TX_BUF_CNT];
+} RTXBD;
+
+/* Good news: the FCC supports external BDs! */
+#ifdef __GNUC__
+static RTXBD rtx __attribute__ ((aligned(8)));
+#else
+#error "rtx must be 64-bit aligned"
+#endif
+
+#undef ET_DEBUG
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int i = 0;
+ int result = 0;
+
+ if (length <= 0) {
+ printf("fec: bad packet size: %d\n", length);
+ goto out;
+ }
+
+ for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ printf("fec: tx buffer not ready\n");
+ goto out;
+ }
+ }
+
+ rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx.txbd[txIdx].cbd_datlen = length;
+ rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \
+ BD_ENET_TX_TC | BD_ENET_TX_PAD);
+
+ for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+ if (i >= TOUT_LOOP) {
+ printf("fec: tx error\n");
+ goto out;
+ }
+ }
+
+#ifdef ET_DEBUG
+ printf("cycles: 0x%x txIdx=0x%04x status: 0x%04x\n", i, txIdx,rtx.txbd[txIdx].cbd_sc);
+ printf("packets at 0x%08x, length_in_bytes=0x%x\n",(uint)packet,length);
+ for(i=0;i<(length/16 + 1);i++) {
+ printf("%08x %08x %08x %08x\n",*((uint *)rtx.txbd[txIdx].cbd_bufaddr+i*4),\
+ *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 1),*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 2), \
+ *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 3));
+ }
+#endif
+
+ /* return only status bits */
+ result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+out:
+ return result;
+}
+
+static int fec_recv(struct eth_device* dev)
+{
+ int length;
+
+ for (;;)
+ {
+ if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+ length = rtx.rxbd[rxIdx].cbd_datlen;
+
+ if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
+ printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
+ }
+ else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ }
+
+
+ /* Give the buffer back to the FCC. */
+ rtx.rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ }
+ else {
+ rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+ }
+ return length;
+}
+
+
+static int fec_init(struct eth_device* dev, bd_t *bis)
+{
+ struct ether_fcc_info_s * info = dev->priv;
+ int i;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
+ fcc_enet_t *pram_ptr;
+ unsigned long mem_addr;
+
+#if 0
+ mii_discover_phy();
+#endif
+
+ /* 28.9 - (1-2): ioports have been set up already */
+
+ /* 28.9 - (3): connect FCC's tx and rx clocks */
+ cpm->im_cpm_mux.cmxuar = 0; /* ATM */
+ cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
+ info->cmxfcr_value;
+
+ /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ } else if (info->ether_index == 1) {
+ cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ } else if (info->ether_index == 2) {
+ cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+ }
+
+ /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
+ } else if (info->ether_index == 1){
+ cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
+ } else if (info->ether_index == 2){
+ cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
+ }
+
+ /* 28.9 - (6): FDSR: Ethernet Syn */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.fdsr = 0xD555;
+ } else if (info->ether_index == 1) {
+ cpm->im_cpm_fcc2.fdsr = 0xD555;
+ } else if (info->ether_index == 2) {
+ cpm->im_cpm_fcc3.fdsr = 0xD555;
+ }
+
+ /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
+ rxIdx = 0;
+ txIdx = 0;
+
+ /* Setup Receiver Buffer Descriptors */
+ for (i = 0; i < PKTBUFSRX; i++)
+ {
+ rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx.rxbd[i].cbd_datlen = 0;
+ rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
+ }
+ rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /* Setup Ethernet Transmitter Buffer Descriptors */
+ for (i = 0; i < TX_BUF_CNT; i++)
+ {
+ rtx.txbd[i].cbd_sc = 0;
+ rtx.txbd[i].cbd_datlen = 0;
+ rtx.txbd[i].cbd_bufaddr = 0;
+ }
+ rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* 28.9 - (7): initialize parameter ram */
+ pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
+
+ /* clear whole structure to make sure all reserved fields are zero */
+ memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
+
+ /*
+ * common Parameter RAM area
+ *
+ * Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ * CPM_FCC_SPECIAL_BASE: 0xB000 for MPC8540, MPC8560
+ * 0x9000 for MPC8541, MPC8555
+ */
+ mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
+ pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
+ pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
+ /*
+ * Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ */
+ pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */
+ /* localbus SDRAM should be preferred */
+ pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
+ CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
+ pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
+ pram_ptr->fen_genfcc.fcc_rbdstat = 0;
+ pram_ptr->fen_genfcc.fcc_rbdlen = 0;
+ pram_ptr->fen_genfcc.fcc_rdptr = 0;
+ /* localbus SDRAM should be preferred */
+ pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
+ CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
+ pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
+ pram_ptr->fen_genfcc.fcc_tbdstat = 0;
+ pram_ptr->fen_genfcc.fcc_tbdlen = 0;
+ pram_ptr->fen_genfcc.fcc_tdptr = 0;
+
+ /* protocol-specific area */
+ pram_ptr->fen_statbuf = 0x0;
+ pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
+ pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
+ pram_ptr->fen_crcec = 0;
+ pram_ptr->fen_alec = 0;
+ pram_ptr->fen_disfc = 0;
+ pram_ptr->fen_retlim = 15; /* Retry limit threshold */
+ pram_ptr->fen_retcnt = 0;
+ pram_ptr->fen_pper = 0;
+ pram_ptr->fen_boffcnt = 0;
+ pram_ptr->fen_gaddrh = 0;
+ pram_ptr->fen_gaddrl = 0;
+ pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
+ /*
+ * Set Ethernet station address.
+ *
+ * This is supplied in the board information structure, so we
+ * copy that into the controller.
+ * So far we have only been given one Ethernet address. We make
+ * it unique by setting a few bits in the upper byte of the
+ * non-static part of the address.
+ */
+#define ea eth_get_dev()->enetaddr
+ pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+ pram_ptr->fen_ibdcount = 0;
+ pram_ptr->fen_ibdstart = 0;
+ pram_ptr->fen_ibdend = 0;
+ pram_ptr->fen_txlen = 0;
+ pram_ptr->fen_iaddrh = 0; /* disable hash */
+ pram_ptr->fen_iaddrl = 0;
+ pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register: 64 */
+ /* pad pointer. use tiptr since we don't need a specific padding char */
+ pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
+ pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length:1520 */
+ pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length:1520 */
+
+#if defined(ET_DEBUG)
+ printf("parm_ptr(0xff788500) = %p\n",pram_ptr);
+ printf("pram_ptr->fen_genfcc.fcc_rbase %08x\n",
+ pram_ptr->fen_genfcc.fcc_rbase);
+ printf("pram_ptr->fen_genfcc.fcc_tbase %08x\n",
+ pram_ptr->fen_genfcc.fcc_tbase);
+#endif
+
+ /* 28.9 - (8)(9): clear out events in FCCE */
+ /* 28.9 - (9): FCCM: mask all events */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.fcce = ~0x0;
+ cpm->im_cpm_fcc1.fccm = 0;
+ } else if (info->ether_index == 1) {
+ cpm->im_cpm_fcc2.fcce = ~0x0;
+ cpm->im_cpm_fcc2.fccm = 0;
+ } else if (info->ether_index == 2) {
+ cpm->im_cpm_fcc3.fcce = ~0x0;
+ cpm->im_cpm_fcc3.fccm = 0;
+ }
+
+ /* 28.9 - (10-12): we don't use ethernet interrupts */
+
+ /* 28.9 - (13)
+ *
+ * Let's re-initialize the channel now. We have to do it later
+ * than the manual describes because we have just now finished
+ * the BD initialization.
+ */
+ cp->cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
+ info->cpm_cr_enet_sblock,
+ 0x0c,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cpcr & CPM_CR_FLG);
+
+ /* 28.9 - (14): enable tx/rx in gfmr */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ } else if (info->ether_index == 1) {
+ cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ } else if (info->ether_index == 2) {
+ cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+ }
+
+ return 1;
+}
+
+static void fec_halt(struct eth_device* dev)
+{
+ struct ether_fcc_info_s * info = dev->priv;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+
+ /* write GFMR: disable tx/rx */
+ if(info->ether_index == 0) {
+ cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ } else if(info->ether_index == 1) {
+ cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ } else if(info->ether_index == 2) {
+ cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+ }
+}
+
+int fec_initialize(bd_t *bis)
+{
+ struct eth_device* dev;
+ int i;
+
+ for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
+ {
+ dev = (struct eth_device*) malloc(sizeof *dev);
+ memset(dev, 0, sizeof *dev);
+
+ sprintf(dev->name, "FCC%d ETHERNET",
+ ether_fcc_info[i].ether_index + 1);
+ dev->priv = ðer_fcc_info[i];
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ eth_register(dev);
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
+ && defined(CONFIG_BITBANGMII)
+ miiphy_register(dev->name,
+ bb_miiphy_read, bb_miiphy_write);
+#endif
+ }
+
+ return 1;
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <linux/ctype.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_qe_setup(void *blob);
+extern void ft_fixup_num_cores(void *blob);
+
+#ifdef CONFIG_MP
+#include "mp.h"
+
+void ft_fixup_cpu(void *blob, u64 memory_limit)
+{
+ int off;
+ ulong spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg();
+ u32 id = get_my_id();
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+
+ if (reg) {
+ if (*reg == id) {
+ fdt_setprop_string(blob, off, "status", "okay");
+ } else {
+ u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
+ val = cpu_to_fdt32(val);
+ fdt_setprop_string(blob, off, "status",
+ "disabled");
+ fdt_setprop_string(blob, off, "enable-method",
+ "spin-table");
+ fdt_setprop(blob, off, "cpu-release-addr",
+ &val, sizeof(val));
+ }
+ } else {
+ printf ("cpu NULL\n");
+ }
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ /* Reserve the boot page so OSes dont use it */
+ if ((u64)bootpg < memory_limit) {
+ off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
+ if (off < 0)
+ printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ }
+}
+#endif
+
+#define ft_fixup_l3cache(x, y)
+
+#if defined(CONFIG_L2_CACHE)
+/* return size in kilobytes */
+static inline u32 l2cache_size(void)
+{
+ volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
+ u32 ver = SVR_SOC_VER(get_svr());
+
+ switch (l2siz_field) {
+ case 0x0:
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 128;
+ else
+ return 256;
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 256;
+ else
+ return 512;
+ break;
+ case 0x3:
+ return 1024;
+ break;
+ }
+
+ return 0;
+}
+
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int len, off;
+ u32 *ph;
+ struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
+ char compat_buf[38];
+
+ const u32 line_size = 32;
+ const u32 num_ways = 8;
+ const u32 size = l2cache_size() * 1024;
+ const u32 num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ if (off < 0) {
+ debug("no cpu node fount\n");
+ return;
+ }
+
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ return ;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, *ph);
+ if (off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+
+ if (cpu) {
+ if (isdigit(cpu->name[0]))
+ len = sprintf(compat_buf,
+ "fsl,mpc%s-l2-cache-controller", cpu->name);
+ else
+ len = sprintf(compat_buf,
+ "fsl,%c%s-l2-cache-controller",
+ tolower(cpu->name[0]), cpu->name + 1);
+
+ sprintf(&compat_buf[len + 1], "cache");
+ }
+ fdt_setprop(blob, off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-size", size);
+ fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, off, "cache-level", 2);
+ fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
+
+ /* we dont bother w/L3 since no platform of this type has one */
+}
+#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int off, l2_off, l3_off = -1;
+ u32 *ph;
+ u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+ u32 size, line_size, num_ways, num_sets;
+
+ size = (l2cfg0 & 0x3fff) * 64 * 1024;
+ num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
+ line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
+ num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off != -FDT_ERR_NOTFOUND) {
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ goto next;
+ }
+
+ l2_off = fdt_node_offset_by_phandle(blob, *ph);
+ if (l2_off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ goto next;
+ }
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+ (*reg * 2) + 32 + 1);
+ }
+#endif
+
+ fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, l2_off, "cache-size", size);
+ fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, l2_off, "cache-level", 2);
+ fdt_setprop(blob, l2_off, "compatible", "cache", 6);
+
+ if (l3_off < 0) {
+ ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ goto next;
+ }
+ l3_off = *ph;
+ }
+next:
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+ if (l3_off > 0) {
+ l3_off = fdt_node_offset_by_phandle(blob, l3_off);
+ if (l3_off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+ ft_fixup_l3cache(blob, l3_off);
+ }
+}
+#else
+#define ft_fixup_l2cache(x)
+#endif
+
+static inline void ft_fixup_cache(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 l1cfg0 = mfspr(SPRN_L1CFG0);
+ u32 l1cfg1 = mfspr(SPRN_L1CFG1);
+ u32 isize, iline_size, inum_sets, inum_ways;
+ u32 dsize, dline_size, dnum_sets, dnum_ways;
+
+ /* d-side config */
+ dsize = (l1cfg0 & 0x7ff) * 1024;
+ dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
+ dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
+ dnum_sets = dsize / (dline_size * dnum_ways);
+
+ fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-size", dsize);
+ fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ if (reg)
+ fdt_setprop_cell(blob, off, "cache-stash-id",
+ (*reg * 2) + 32 + 0);
+ }
+#endif
+
+ /* i-side config */
+ isize = (l1cfg1 & 0x7ff) * 1024;
+ inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
+ iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
+ inum_sets = isize / (iline_size * inum_ways);
+
+ fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-size", isize);
+ fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
+
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ ft_fixup_l2cache(blob);
+}
+
+
+void fdt_add_enet_stashing(void *fdt)
+{
+ do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
+
+ do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
+
+ do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
+}
+
+#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
+static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
+{
+ const char *path = fdt_get_alias(blob, alias);
+
+ int off = fdt_path_offset(blob, path);
+
+ if (off >= 0) {
+ off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
+ if (off > 0)
+ printf("WARNING enable to set clock-frequency "
+ "for %s: %s\n", alias, fdt_strerror(off));
+ }
+}
+
+static void ft_fixup_dpaa_clks(void *blob)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ ft_fixup_clks(blob, "pme", sysinfo.freqPME);
+#endif
+}
+#else
+#define ft_fixup_dpaa_clks(x)
+#endif
+
+#ifdef CONFIG_QE
+static void ft_fixup_qe_snum(void *blob)
+{
+ unsigned int svr;
+
+ svr = mfspr(SPRN_SVR);
+ if (SVR_SOC_VER(svr) == SVR_8569_E) {
+ if(IS_SVR_REV(svr, 1, 0))
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "fsl,qe-num-snums", 46, 1);
+ else
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "fsl,qe-num-snums", 76, 1);
+ }
+}
+#endif
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ int off;
+ int val;
+ sys_info_t sysinfo;
+
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(get_svr()))
+ fdt_fixup_crypto_node(blob, 0);
+
+ fdt_fixup_ethernet(blob);
+
+ fdt_add_enet_stashing(blob);
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", get_tbclk(), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ get_sys_info(&sysinfo);
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+ val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+ fdt_setprop(blob, off, "clock-frequency", &val, 4);
+ off = fdt_node_offset_by_prop_value(blob, off, "device_type",
+ "cpu", 4);
+ }
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
+ "bus-frequency", gd->lbc_clk, 1);
+ do_fixup_by_compat_u32(blob, "fsl,elbc",
+ "bus-frequency", gd->lbc_clk, 1);
+#ifdef CONFIG_QE
+ ft_qe_setup(blob);
+ ft_fixup_qe_snum(blob);
+#endif
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+ "current-speed", bd->bi_baudrate, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#ifdef CONFIG_MP
+ ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
+#endif
+ ft_fixup_num_cores(blob);
+
+ ft_fixup_cache(blob);
+
+#if defined(CONFIG_FSL_ESDHC)
+ fdt_fixup_esdhc(blob, bd);
+#endif
+
+ ft_fixup_dpaa_clks(blob);
+}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Kumar Gala <kumar.gala@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is intended to be included by other asm code since
+ * we will want to execute this on both the primary core when
+ * it does a bootm and the secondary core's that get released
+ * out of the spin table */
+
+#define SET_IVOR(vector_number, vector_offset) \
+ li r3,vector_offset@l; \
+ mtspr SPRN_IVOR##vector_number,r3;
+
+#define SET_GIVOR(vector_number, vector_offset) \
+ li r3,vector_offset@l; \
+ mtspr SPRN_GIVOR##vector_number,r3;
+
+ SET_IVOR(0, 0x020) /* Critical Input */
+ SET_IVOR(1, 0x000) /* Machine Check */
+ SET_IVOR(2, 0x060) /* Data Storage */
+ SET_IVOR(3, 0x080) /* Instruction Storage */
+ SET_IVOR(4, 0x0a0) /* External Input */
+ SET_IVOR(5, 0x0c0) /* Alignment */
+ SET_IVOR(6, 0x0e0) /* Program */
+ SET_IVOR(7, 0x100) /* FP Unavailable */
+ SET_IVOR(8, 0x120) /* System Call */
+ SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
+ SET_IVOR(10, 0x160) /* Decrementer */
+ SET_IVOR(11, 0x180) /* Fixed Interval Timer */
+ SET_IVOR(12, 0x1a0) /* Watchdog Timer */
+ SET_IVOR(13, 0x1c0) /* Data TLB Error */
+ SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+ SET_IVOR(15, 0x040) /* Debug */
+
+/* e500v1 & e500v2 only */
+#ifndef CONFIG_E500MC
+ SET_IVOR(32, 0x200) /* SPE Unavailable */
+ SET_IVOR(33, 0x220) /* Embedded FP Data */
+ SET_IVOR(34, 0x240) /* Embedded FP Round */
+#endif
+
+ SET_IVOR(35, 0x260) /* Performance monitor */
+
+/* e500mc only */
+#ifdef CONFIG_E500MC
+ SET_IVOR(36, 0x280) /* Processor doorbell */
+ SET_IVOR(37, 0x2a0) /* Processor doorbell critical */
+ SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */
+ SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */
+ SET_IVOR(40, 0x300) /* Hypervisor system call */
+ SET_IVOR(41, 0x320) /* Hypervisor Priviledge */
+
+ SET_GIVOR(2, 0x060) /* Guest Data Storage */
+ SET_GIVOR(3, 0x080) /* Guest Instruction Storage */
+ SET_GIVOR(4, 0x0a0) /* Guest External Input */
+ SET_GIVOR(8, 0x120) /* Guest System Call */
+ SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */
+ SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+int interrupt_init_cpu(unsigned int *decrementer_count)
+{
+ ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC85xx_PIC_ADDR;
+
+ out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
+ while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
+ ;
+ out_be32(&pic->gcr, MPC85xx_PICGCR_M);
+ in_be32(&pic->gcr);
+
+ *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+ /* PIE is same as DIE, dec interrupt enable */
+ mtspr(SPRN_TCR, TCR_PIE);
+
+#ifdef CONFIG_INTERRUPTS
+ pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
+ debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
+
+ pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
+ debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
+
+ pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
+ debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
+
+#ifdef CONFIG_PCI1
+ pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
+ debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
+#endif
+#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
+ pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
+ debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
+#endif
+#ifdef CONFIG_PCIE1
+ pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
+ debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
+#endif
+#ifdef CONFIG_PCIE3
+ pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
+ debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
+#endif
+
+ pic->ctpr=0; /* 40080 clear current task priority register */
+#endif
+
+ return (0);
+}
+
+/* Install and free a interrupt handler. Not implemented yet. */
+
+void
+irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+ return;
+}
+
+void
+irq_free_handler(int vec)
+{
+ return;
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* PIS is same as DIS, dec interrupt status */
+ mtspr(SPRN_TSR, TSR_PIS);
+}
+
+#if defined(CONFIG_CMD_IRQ)
+/* irqinfo - print information about PCI devices,not implemented. */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ioports.h>
+#include <lmb.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 get_my_id()
+{
+ return mfspr(SPRN_PIR);
+}
+
+int cpu_reset(int nr)
+{
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ out_be32(&pic->pir, 1 << nr);
+ /* the dummy read works around an errata on early 85xx MP PICs */
+ (void)in_be32(&pic->pir);
+ out_be32(&pic->pir, 0x0);
+
+ return 0;
+}
+
+int cpu_status(int nr)
+{
+ u32 *table, id = get_my_id();
+
+ if (nr == id) {
+ table = (u32 *)get_spin_virt_addr();
+ printf("table base @ 0x%p\n", table);
+ } else {
+ table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ printf("Running on cpu %d\n", id);
+ printf("\n");
+ printf("table @ 0x%p\n", table);
+ printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
+ printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
+ printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_CORENET
+int cpu_disable(int nr)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->coredisrl, 1 << nr);
+
+ return 0;
+}
+#else
+int cpu_disable(int nr)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ switch (nr) {
+ case 0:
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
+ break;
+ case 1:
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
+ break;
+ default:
+ printf("Invalid cpu number for disable %d\n", nr);
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
+static u8 boot_entry_map[4] = {
+ 0,
+ BOOT_ENTRY_PIR,
+ BOOT_ENTRY_R3_LOWER,
+ BOOT_ENTRY_R6_LOWER,
+};
+
+int cpu_release(int nr, int argc, char *argv[])
+{
+ u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u64 boot_addr;
+
+ if (nr == get_my_id()) {
+ printf("Invalid to release the boot core.\n\n");
+ return 1;
+ }
+
+ if (argc != 4) {
+ printf("Invalid number of arguments to release.\n\n");
+ return 1;
+ }
+
+ boot_addr = simple_strtoull(argv[0], NULL, 16);
+
+ /* handle pir, r3, r6 */
+ for (i = 1; i < 4; i++) {
+ if (argv[i][0] != '-') {
+ u8 entry = boot_entry_map[i];
+ val = simple_strtoul(argv[i], NULL, 16);
+ table[entry] = val;
+ }
+ }
+
+ table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
+
+ /* ensure all table updates complete before final address write */
+ eieio();
+
+ table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
+
+ return 0;
+}
+
+u32 determine_mp_bootpg(void)
+{
+ /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
+ if ((u64)gd->ram_size > 0xfffff000)
+ return (0xfffff000);
+
+ return (gd->ram_size - 4096);
+}
+
+ulong get_spin_phys_addr(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __spin_table;
+
+ return (determine_mp_bootpg() +
+ (ulong)&__spin_table - (ulong)&__secondary_start_page);
+}
+
+ulong get_spin_virt_addr(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __spin_table;
+
+ return (CONFIG_BPTR_VIRT_ADDR +
+ (ulong)&__spin_table - (ulong)&__secondary_start_page);
+}
+
+#ifdef CONFIG_FSL_CORENET
+static void plat_mp_up(unsigned long bootpg)
+{
+ u32 up, cpu_up_mask, whoami;
+ u32 *table = (u32 *)get_spin_virt_addr();
+ volatile ccsr_gur_t *gur;
+ volatile ccsr_local_t *ccm;
+ volatile ccsr_rcpm_t *rcpm;
+ volatile ccsr_pic_t *pic;
+ int timeout = 10;
+ u32 nr_cpus;
+ struct law_entry e;
+
+ gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
+ rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
+ pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+
+ nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
+
+ whoami = in_be32(&pic->whoami);
+ cpu_up_mask = 1 << whoami;
+ out_be32(&ccm->bstrl, bootpg);
+
+ e = find_law(bootpg);
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+
+ /* readback to sync write */
+ in_be32(&ccm->bstrar);
+
+ /* disable time base at the platform */
+ out_be32(&rcpm->ctbenrl, cpu_up_mask);
+
+ /* release the hounds */
+ up = ((1 << nr_cpus) - 1);
+ out_be32(&gur->brrl, up);
+
+ /* wait for everyone */
+ while (timeout) {
+ int i;
+ for (i = 0; i < nr_cpus; i++) {
+ if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
+ cpu_up_mask |= (1 << i);
+ };
+
+ if ((cpu_up_mask & up) == up)
+ break;
+
+ udelay(100);
+ timeout--;
+ }
+
+ if (timeout == 0)
+ printf("CPU up timeout. CPU up mask is %x should be %x\n",
+ cpu_up_mask, up);
+
+ /* enable time base at the platform */
+ out_be32(&rcpm->ctbenrl, 0);
+ mtspr(SPRN_TBWU, 0);
+ mtspr(SPRN_TBWL, 0);
+ out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Disabling Boot Page Translation allows the memory region 0xfffff000
+ * to 0xffffffff to be used normally. Leaving Boot Page Translation
+ * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+ * unusable for normal operation but it does allow OSes to easily
+ * reset a processor core to put it back into U-Boot's spinloop.
+ */
+ clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
+}
+#else
+static void plat_mp_up(unsigned long bootpg)
+{
+ u32 up, cpu_up_mask, whoami;
+ u32 *table = (u32 *)get_spin_virt_addr();
+ volatile u32 bpcr;
+ volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ u32 devdisr;
+ int timeout = 10;
+
+ whoami = in_be32(&pic->whoami);
+ out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
+
+ /* disable time base at the platform */
+ devdisr = in_be32(&gur->devdisr);
+ if (whoami)
+ devdisr |= MPC85xx_DEVDISR_TB0;
+ else
+ devdisr |= MPC85xx_DEVDISR_TB1;
+ out_be32(&gur->devdisr, devdisr);
+
+ /* release the hounds */
+ up = ((1 << cpu_numcores()) - 1);
+ bpcr = in_be32(&ecm->eebpcr);
+ bpcr |= (up << 24);
+ out_be32(&ecm->eebpcr, bpcr);
+ asm("sync; isync; msync");
+
+ cpu_up_mask = 1 << whoami;
+ /* wait for everyone */
+ while (timeout) {
+ int i;
+ for (i = 0; i < cpu_numcores(); i++) {
+ if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
+ cpu_up_mask |= (1 << i);
+ };
+
+ if ((cpu_up_mask & up) == up)
+ break;
+
+ udelay(100);
+ timeout--;
+ }
+
+ if (timeout == 0)
+ printf("CPU up timeout. CPU up mask is %x should be %x\n",
+ cpu_up_mask, up);
+
+ /* enable time base at the platform */
+ if (whoami)
+ devdisr |= MPC85xx_DEVDISR_TB1;
+ else
+ devdisr |= MPC85xx_DEVDISR_TB0;
+ out_be32(&gur->devdisr, devdisr);
+ mtspr(SPRN_TBWU, 0);
+ mtspr(SPRN_TBWL, 0);
+
+ devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
+ out_be32(&gur->devdisr, devdisr);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+ /*
+ * Disabling Boot Page Translation allows the memory region 0xfffff000
+ * to 0xffffffff to be used normally. Leaving Boot Page Translation
+ * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+ * unusable for normal operation but it does allow OSes to easily
+ * reset a processor core to put it back into U-Boot's spinloop.
+ */
+ clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
+}
+#endif
+
+void cpu_mp_lmb_reserve(struct lmb *lmb)
+{
+ u32 bootpg = determine_mp_bootpg();
+
+ lmb_reserve(lmb, bootpg, 4096);
+}
+
+void setup_mp(void)
+{
+ extern ulong __secondary_start_page;
+ extern ulong __bootpg_addr;
+ ulong fixup = (ulong)&__secondary_start_page;
+ u32 bootpg = determine_mp_bootpg();
+
+ /* Store the bootpg's SDRAM address for use by secondary CPU cores */
+ __bootpg_addr = bootpg;
+
+ /* look for the tlb covering the reset page, there better be one */
+ int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+
+ /* we found a match */
+ if (i != -1) {
+ /* map reset page to bootpg so we can copy code there */
+ disable_tlb(i);
+
+ set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
+ 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
+
+ memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
+
+ plat_mp_up(bootpg);
+ } else {
+ puts("WARNING: No reset page TLB. "
+ "Skipping secondary core setup\n");
+ }
+}
--- /dev/null
+#ifndef __MPC85XX_MP_H_
+#define __MPC85XX_MP_H_
+
+#include <asm/mp.h>
+
+ulong get_spin_phys_addr(void);
+ulong get_spin_virt_addr(void);
+u32 get_my_id(void);
+
+#define BOOT_ENTRY_ADDR_UPPER 0
+#define BOOT_ENTRY_ADDR_LOWER 1
+#define BOOT_ENTRY_R3_UPPER 2
+#define BOOT_ENTRY_R3_LOWER 3
+#define BOOT_ENTRY_RESV 4
+#define BOOT_ENTRY_PIR 5
+#define BOOT_ENTRY_R6_UPPER 6
+#define BOOT_ENTRY_R6_LOWER 7
+#define NUM_BOOT_ENTRY 8
+#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008 Freescale Semicondutor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+
+/* PORDEVSR register */
+#define GUTS_PORDEVSR_OFFS 0xc
+#define GUTS_PORDEVSR_SERDES2_IO_SEL 0x38000000
+#define GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT 27
+
+/* SerDes CR0 register */
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_TXEQA_MASK 0x00007000
+#define FSL_SRDSCR0_TXEQA_SGMII 0x00004000
+#define FSL_SRDSCR0_TXEQA_SATA 0x00001000
+#define FSL_SRDSCR0_TXEQE_MASK 0x00000700
+#define FSL_SRDSCR0_TXEQE_SGMII 0x00000400
+#define FSL_SRDSCR0_TXEQE_SATA 0x00000100
+
+/* SerDes CR1 register */
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_LANEA_MASK 0x80200000
+#define FSL_SRDSCR1_LANEA_OFF 0x80200000
+#define FSL_SRDSCR1_LANEE_MASK 0x08020000
+#define FSL_SRDSCR1_LANEE_OFF 0x08020000
+
+/* SerDes CR2 register */
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_EICA_MASK 0x00001f00
+#define FSL_SRDSCR2_EICA_SGMII 0x00000400
+#define FSL_SRDSCR2_EICA_SATA 0x00001400
+#define FSL_SRDSCR2_EICE_MASK 0x0000001f
+#define FSL_SRDSCR2_EICE_SGMII 0x00000004
+#define FSL_SRDSCR2_EICE_SATA 0x00000014
+
+/* SerDes CR3 register */
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_LANEA_MASK 0x3f000700
+#define FSL_SRDSCR3_LANEA_SGMII 0x00000000
+#define FSL_SRDSCR3_LANEA_SATA 0x15000500
+#define FSL_SRDSCR3_LANEE_MASK 0x003f0007
+#define FSL_SRDSCR3_LANEE_SGMII 0x00000000
+#define FSL_SRDSCR3_LANEE_SATA 0x00150005
+
+void fsl_serdes_init(void)
+{
+ void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
+ u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
+ u32 srds2_io_sel;
+ u32 tmp;
+
+ /* parse the SRDS2_IO_SEL of PORDEVSR */
+ srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
+ >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
+
+ switch (srds2_io_sel) {
+ case 1: /* Lane A - SATA1, Lane E - SATA2 */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SATA;
+ tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
+ tmp |= FSL_SRDSCR0_TXEQE_SATA;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SATA;
+ tmp &= ~FSL_SRDSCR2_EICE_MASK;
+ tmp |= FSL_SRDSCR2_EICE_SATA;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SATA;
+ tmp &= ~FSL_SRDSCR3_LANEE_MASK;
+ tmp |= FSL_SRDSCR3_LANEE_SATA;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 3: /* Lane A - SATA1, Lane E - disabled */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SATA;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SATA;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SATA;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 4: /* Lane A - eTSEC1 SGMII, Lane E - eTSEC3 SGMII */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SGMII;
+ tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
+ tmp |= FSL_SRDSCR0_TXEQE_SGMII;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SGMII;
+ tmp &= ~FSL_SRDSCR2_EICE_MASK;
+ tmp |= FSL_SRDSCR2_EICE_SGMII;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SGMII;
+ tmp &= ~FSL_SRDSCR3_LANEE_MASK;
+ tmp |= FSL_SRDSCR3_LANEE_SGMII;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 6: /* Lane A - eTSEC1 SGMII, Lane E - disabled */
+ /* CR 0 */
+ tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
+ tmp |= FSL_SRDSCR0_TXEQA_SGMII;
+ out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ /* CR 2 */
+ tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_EICA_MASK;
+ tmp |= FSL_SRDSCR2_EICA_SGMII;
+ out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
+ /* CR 3 */
+ tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
+ tmp &= ~FSL_SRDSCR3_LANEA_MASK;
+ tmp |= FSL_SRDSCR3_LANEA_SGMII;
+ out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
+ break;
+ case 7: /* Lane A - disabled, Lane E - disabled */
+ /* CR 1 */
+ tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_LANEA_MASK;
+ tmp |= FSL_SRDSCR1_LANEA_OFF;
+ tmp &= ~FSL_SRDSCR1_LANEE_MASK;
+ tmp |= FSL_SRDSCR1_LANEE_OFF;
+ out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
+ break;
+ default:
+ break;
+ }
+}
--- /dev/null
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI Configuration space access support for MPC85xx PCI Bridge
+ */
+#include <common.h>
+#include <asm/cpm_85xx.h>
+#include <pci.h>
+
+#if !defined(CONFIG_FSL_PCI_INIT)
+
+#ifndef CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI1_IO_BUS
+#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_MEM_BUS
+#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_IO_BUS
+#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
+#endif
+
+static struct pci_controller *pci_hose;
+
+void
+pci_mpc85xx_init(struct pci_controller *board_hose)
+{
+ u16 reg16;
+ u32 dev;
+
+ volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
+#ifdef CONFIG_MPC85XX_PCI2
+ volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
+#endif
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct pci_controller * hose;
+
+ pci_hose = board_hose;
+
+ hose = &pci_hose[0];
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose,
+ (CONFIG_SYS_IMMR+0x8000),
+ (CONFIG_SYS_IMMR+0x8004));
+
+ /*
+ * Hose scan.
+ */
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
+ /* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ printf("PCI-X will only work at 66 MHz\n");
+
+ reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+ pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
+ }
+
+ pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
+ pcix->potear1 = 0x00000000;
+ pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
+ pcix->powbear1 = 0x00000000;
+ pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
+
+ pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
+ pcix->potear2 = 0x00000000;
+ pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
+ pcix->powbear2 = 0x00000000;
+ pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
+
+ pcix->pitar1 = 0x00000000;
+ pcix->piwbar1 = 0x00000000;
+ pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+ pcix->powar3 = 0;
+ pcix->powar4 = 0;
+ pcix->piwar2 = 0;
+ pcix->piwar3 = 0;
+
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCI1_MEM_BUS,
+ CONFIG_SYS_PCI1_MEM_PHYS,
+ CONFIG_SYS_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1,
+ CONFIG_SYS_PCI1_IO_BUS,
+ CONFIG_SYS_PCI1_IO_PHYS,
+ CONFIG_SYS_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ pci_register_hose(hose);
+
+#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
+ /*
+ * This is a SW workaround for an apparent HW problem
+ * in the PCI controller on the MPC85555/41 CDS boards.
+ * The first config cycle must be to a valid, known
+ * device on the PCI bus in order to trick the PCI
+ * controller state machine into a known valid state.
+ * Without this, the first config cycle has the chance
+ * of hanging the controller permanently, just leaving
+ * it in a semi-working state, or leaving it working.
+ *
+ * Pick on the Tundra, Device 17, to get it right.
+ */
+ {
+ u8 header_type;
+
+ pci_hose_read_config_byte(hose,
+ PCI_BDF(0,BRIDGE_ID,0),
+ PCI_HEADER_TYPE,
+ &header_type);
+ }
+#endif
+
+ hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC85XX_PCI2
+ hose = &pci_hose[1];
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+ hose->last_busno = 0xff;
+
+ pci_setup_indirect(hose,
+ (CONFIG_SYS_IMMR+0x9000),
+ (CONFIG_SYS_IMMR+0x9004));
+
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+ pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
+ pcix2->potear1 = 0x00000000;
+ pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear1 = 0x00000000;
+ pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
+
+ pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
+ pcix2->potear2 = 0x00000000;
+ pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
+ pcix2->powbear2 = 0x00000000;
+ pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
+
+ pcix2->pitar1 = 0x00000000;
+ pcix2->piwbar1 = 0x00000000;
+ pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+ pcix2->powar3 = 0;
+ pcix2->powar4 = 0;
+ pcix2->piwar2 = 0;
+ pcix2->piwar3 = 0;
+
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCI2_MEM_BUS,
+ CONFIG_SYS_PCI2_MEM_PHYS,
+ CONFIG_SYS_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1,
+ CONFIG_SYS_PCI2_IO_BUS,
+ CONFIG_SYS_PCI2_IO_PHYS,
+ CONFIG_SYS_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 2;
+
+ /*
+ * Hose scan.
+ */
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+#endif /* !CONFIG_FSL_PCI_INIT */
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_85xx.h"
+
+#if defined(CONFIG_QE)
+#define NUM_OF_PINS 32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+ u32 pin_2bit_mask;
+ u32 pin_2bit_dir;
+ u32 pin_2bit_assign;
+ u32 pin_1bit_mask;
+ u32 tmp_val;
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile par_io_t *par_io = (volatile par_io_t *)
+ &(gur->qe_par_io);
+
+ /* Caculate pin location and 2bit mask and dir */
+ pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+ pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Setup the direction */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+ in_be32(&par_io[port].cpdir2) :
+ in_be32(&par_io[port].cpdir1);
+
+ if (pin > (NUM_OF_PINS/2) -1) {
+ out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val);
+ } else {
+ out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val);
+ }
+
+ /* Calculate pin location for 1bit mask */
+ pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+ /* Setup the open drain */
+ tmp_val = in_be32(&par_io[port].cpodr);
+ if (open_drain)
+ out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val);
+ else
+ out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val);
+
+ /* Setup the assignment */
+ tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+ in_be32(&par_io[port].cppar2):
+ in_be32(&par_io[port].cppar1);
+ pin_2bit_assign = (u32)(assign
+ << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+ /* Clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS/2) - 1) {
+ out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val);
+ } else {
+ out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val);
+ out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val);
+ }
+}
+
+#endif /* CONFIG_QE */
--- /dev/null
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Kumar Gala <kumar.gala@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <mpc85xx.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* To boot secondary cpus, we need a place for them to start up.
+ * Normally, they start at 0xfffffffc, but that's usually the
+ * firmware, and we don't want to have to run the firmware again.
+ * Instead, the primary cpu will set the BPTR to point here to
+ * this page. We then set up the core, and head to
+ * start_secondary. Note that this means that the code below
+ * must never exceed 1023 instructions (the branch at the end
+ * would then be the 1024th).
+ */
+ .globl __secondary_start_page
+ .align 12
+__secondary_start_page:
+/* First do some preliminary setup */
+ lis r3, HID0_EMCP@h /* enable machine check */
+#ifndef CONFIG_E500MC
+ ori r3,r3,HID0_TBEN@l /* enable Timebase */
+#endif
+#ifdef CONFIG_PHYS_64BIT
+ ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */
+#endif
+ mtspr SPRN_HID0,r3
+
+#ifndef CONFIG_E500MC
+ li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r0,PVR
+ andi. r0,r0,0xff
+ cmpwi r0,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r3, r3, HID1_MBDD@l
+1:
+ mtspr SPRN_HID1,r3
+#endif
+
+ /* Enable branch prediction */
+ lis r3,BUCSR_ENABLE@h
+ ori r3,r3,BUCSR_ENABLE@l
+ mtspr SPRN_BUCSR,r3
+
+ /* Ensure TB is 0 */
+ li r3,0
+ mttbl r3
+ mttbu r3
+
+ /* Enable/invalidate the I-Cache */
+ lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+ ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+ mtspr SPRN_L1CSR1,r2
+1:
+ mfspr r3,SPRN_L1CSR1
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+ ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+ mtspr SPRN_L1CSR1,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR1
+ andi. r1,r3,L1CSR1_ICE@l
+ beq 2b
+
+ /* Enable/invalidate the D-Cache */
+ lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+ ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+ mtspr SPRN_L1CSR0,r2
+1:
+ mfspr r3,SPRN_L1CSR0
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+ ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+ mtspr SPRN_L1CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR0
+ andi. r1,r3,L1CSR0_DCE@l
+ beq 2b
+
+#define toreset(x) (x - __secondary_start_page + 0xfffff000)
+
+ /* get our PIR to figure out our table entry */
+ lis r3,toreset(__spin_table)@h
+ ori r3,r3,toreset(__spin_table)@l
+
+ /* r10 has the base address for the entry */
+ mfspr r0,SPRN_PIR
+#ifdef CONFIG_E500MC
+ rlwinm r4,r0,27,27,31
+#else
+ mr r4,r0
+#endif
+ slwi r8,r4,5
+ add r10,r3,r8
+
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
+#ifdef CONFIG_BACKSIDE_L2_CACHE
+ /* Enable/invalidate the L2 cache */
+ msync
+ lis r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ mtspr SPRN_L2CSR0,r2
+1:
+ mfspr r3,SPRN_L2CSR0
+ and. r1,r3,r2
+ bne 1b
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L2 (1) */
+ addi r3,r8,1
+ mtspr SPRN_L2CSR1,r3
+#endif
+
+ lis r3,CONFIG_SYS_INIT_L2CSR0@h
+ ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l
+ mtspr SPRN_L2CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L2CSR0
+ andis. r1,r3,L2CSR0_L2E@h
+ beq 2b
+#endif
+
+#define EPAPR_MAGIC (0x45504150)
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_R6_UPPER 24
+#define ENTRY_R6_LOWER 28
+#define ENTRY_SIZE 32
+
+ /* setup the entry */
+ li r3,0
+ li r8,1
+ stw r0,ENTRY_PIR(r10)
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r8,ENTRY_ADDR_LOWER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_R6_UPPER(r10)
+ stw r3,ENTRY_R6_LOWER(r10)
+
+ /* load r13 with the address of the 'bootpg' in SDRAM */
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r13,0(r13)
+
+ /* setup mapping for AS = 1, and jump there */
+ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
+ mtspr SPRN_MAS0,r11
+ lis r11,(MAS1_VALID|MAS1_IPROT)@h
+ ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+ mtspr SPRN_MAS1,r11
+ oris r11,r13,(MAS2_I|MAS2_G)@h
+ ori r11,r13,(MAS2_I|MAS2_G)@l
+ mtspr SPRN_MAS2,r11
+ oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
+ ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
+ mtspr SPRN_MAS3,r11
+ tlbwe
+
+ bl 1f
+1: mflr r11
+ /*
+ * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
+ * this mask to fixup the cpu spin table and the address that we want
+ * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
+ * bootpg is at 0x7ffff000 in SDRAM.
+ */
+ ori r13,r13,0xfff
+ and r11, r11, r13
+ and r10, r10, r13
+
+ addi r11,r11,(2f-1b)
+ mfmsr r13
+ ori r12,r13,MSR_IS|MSR_DS@l
+
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+ rfi
+
+ /* spin waiting for addr */
+2:
+ lwz r4,ENTRY_ADDR_LOWER(r10)
+ andi. r11,r4,1
+ bne 2b
+ isync
+
+ /* setup IVORs to match fixed offsets */
+#include "fixed_ivor.S"
+
+ /* get the upper bits of the addr */
+ lwz r11,ENTRY_ADDR_UPPER(r10)
+
+ /* setup branch addr */
+ mtspr SPRN_SRR0,r4
+
+ /* mark the entry as released */
+ li r8,3
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
+ /* mask by ~64M to setup our tlb we will jump to */
+ rlwinm r12,r4,0,0,5
+
+ /* setup r3, r4, r5, r6, r7, r8, r9 */
+ lwz r3,ENTRY_R3_LOWER(r10)
+ li r4,0
+ li r5,0
+ lwz r6,ENTRY_R6_LOWER(r10)
+ lis r7,(64*1024*1024)@h
+ li r8,0
+ li r9,0
+
+ /* load up the pir */
+ lwz r0,ENTRY_PIR(r10)
+ mtspr SPRN_PIR,r0
+ mfspr r0,SPRN_PIR
+ stw r0,ENTRY_PIR(r10)
+
+ mtspr IVPR,r12
+/*
+ * Coming here, we know the cpu has one TLB mapping in TLB1[0]
+ * which maps 0xfffff000-0xffffffff one-to-one. We set up a
+ * second mapping that maps addr 1:1 for 64M, and then we jump to
+ * addr
+ */
+ lis r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
+ mtspr SPRN_MAS0,r10
+ lis r10,(MAS1_VALID|MAS1_IPROT)@h
+ ori r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
+ mtspr SPRN_MAS1,r10
+ /* WIMGE = 0b00000 for now */
+ mtspr SPRN_MAS2,r12
+ ori r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
+ mtspr SPRN_MAS3,r12
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr SPRN_MAS7,r11
+#endif
+ tlbwe
+
+/* Now we have another mapping for this page, so we jump to that
+ * mapping
+ */
+ mtspr SPRN_SRR1,r13
+ rfi
+
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .align L1_CACHE_SHIFT
+ .globl __spin_table
+__spin_table:
+ .space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
--- /dev/null
+ .section .resetvec,"ax"
+ b _start_e500
--- /dev/null
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ * Modified based on 8260 for 8560.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
+ */
+
+/*
+ * Minimal serial functions needed to use one of the SCC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <asm/cpm_85xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CONS_ON_SCC)
+
+#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
+
+#define SCC_INDEX 0
+#define PROFF_SCC PROFF_SCC1
+#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
+ CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
+
+#define SCC_INDEX 1
+#define PROFF_SCC PROFF_SCC2
+#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
+ CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
+
+#define SCC_INDEX 2
+#define PROFF_SCC PROFF_SCC3
+#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
+ CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
+
+#define SCC_INDEX 3
+#define PROFF_SCC PROFF_SCC4
+#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
+ CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
+#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
+#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
+#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
+
+#else
+
+#error "console not correctly defined"
+
+#endif
+
+int serial_init (void)
+{
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ volatile ccsr_cpm_scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
+ uint dpaddr;
+
+ /* initialize pointers to SCC */
+
+ sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+
+ /* Disable transmitter/receiver.
+ */
+ sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* put the SCC channel into NMSI (non multiplexd serial interface)
+ * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
+ */
+ cpm->im_cpm_mux.cmxscr = \
+ (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
+
+ /* Set up the baud rate generator.
+ */
+ serial_setbrg ();
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
+ rbdf->cbd_bufaddr = (uint) (rbdf+2);
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+ tbdf->cbd_sc = BD_SC_WRAP;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+ up->scc_genscc.scc_rfcr = CPMFCR_EB;
+ up->scc_genscc.scc_tfcr = CPMFCR_EB;
+ up->scc_genscc.scc_mrblr = 1;
+ up->scc_maxidl = 0;
+ up->scc_brkcr = 1;
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
+ up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->sccm = 0;
+ sp->scce = 0xffff;
+
+ /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
+ */
+ sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
+ sp->gsmrl = \
+ SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
+
+ /* Set CTS no flow control, 1 stop bit, 8 bit character length,
+ * normal async UART mode, no parity
+ */
+ sp->psmr = SCU_PSMR_CL;
+
+ /* execute the "Init Rx and Tx params" CP command.
+ */
+
+ while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+ 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
+
+ return (0);
+}
+
+void
+serial_setbrg (void)
+{
+#if defined(CONFIG_CONS_USE_EXTC)
+ m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
+ CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
+#else
+ m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
+#endif
+}
+
+void
+serial_putc(const char c)
+{
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+
+ if (c == '\n')
+ serial_putc ('\r');
+
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
+
+ /* Wait for last character to go.
+ */
+ while (tbdf->cbd_sc & BD_SC_READY)
+ ;
+
+ /* Load the character into the transmit buffer.
+ */
+ *(volatile char *)tbdf->cbd_bufaddr = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int
+serial_getc(void)
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ unsigned char c;
+
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
+
+ /* Wait for character to show up.
+ */
+ while (rbdf->cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* Grab the char and clear the buffer again.
+ */
+ c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+int
+serial_tstc()
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+
+ up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
+ rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
+
+ return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
+}
+
+#endif /* CONFIG_CONS_ON_SCC */
--- /dev/null
+/*
+ * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc_asm.tmpl>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* --------------------------------------------------------------- */
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_CORENET
+ volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
+
+ const u8 core_cplx_PLL[16] = {
+ [ 0] = 0, /* CC1 PPL / 1 */
+ [ 1] = 0, /* CC1 PPL / 2 */
+ [ 2] = 0, /* CC1 PPL / 4 */
+ [ 4] = 1, /* CC2 PPL / 1 */
+ [ 5] = 1, /* CC2 PPL / 2 */
+ [ 6] = 1, /* CC2 PPL / 4 */
+ [ 8] = 2, /* CC3 PPL / 1 */
+ [ 9] = 2, /* CC3 PPL / 2 */
+ [10] = 2, /* CC3 PPL / 4 */
+ [12] = 3, /* CC4 PPL / 1 */
+ [13] = 3, /* CC4 PPL / 2 */
+ [14] = 3, /* CC4 PPL / 4 */
+ };
+
+ const u8 core_cplx_PLL_div[16] = {
+ [ 0] = 1, /* CC1 PPL / 1 */
+ [ 1] = 2, /* CC1 PPL / 2 */
+ [ 2] = 4, /* CC1 PPL / 4 */
+ [ 4] = 1, /* CC2 PPL / 1 */
+ [ 5] = 2, /* CC2 PPL / 2 */
+ [ 6] = 4, /* CC2 PPL / 4 */
+ [ 8] = 1, /* CC3 PPL / 1 */
+ [ 9] = 2, /* CC3 PPL / 2 */
+ [10] = 4, /* CC3 PPL / 4 */
+ [12] = 1, /* CC4 PPL / 1 */
+ [13] = 2, /* CC4 PPL / 2 */
+ [14] = 4, /* CC4 PPL / 4 */
+ };
+ uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
+ unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+ sysInfo->freqSystemBus = sysclk;
+ sysInfo->freqDDRBus = sysclk;
+ freqCC_PLL[0] = sysclk;
+ freqCC_PLL[1] = sysclk;
+ freqCC_PLL[2] = sysclk;
+ freqCC_PLL[3] = sysclk;
+
+ sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+ sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0x1f);
+ freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
+ freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
+ freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
+ freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
+
+ rcw_tmp = in_be32(&gur->rcwsr[3]);
+ for (i = 0; i < cpu_numcores(); i++) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[i] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
+
+#define PME_CLK_SEL 0x80000000
+#define FM1_CLK_SEL 0x40000000
+#define FM2_CLK_SEL 0x20000000
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ if (rcw_tmp & PME_CLK_SEL)
+ sysInfo->freqPME = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ if (rcw_tmp & FM1_CLK_SEL)
+ sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+#if (CONFIG_SYS_NUM_FMAN) == 2
+ if (rcw_tmp & FM2_CLK_SEL)
+ sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+#endif
+#endif
+
+#else
+ uint plat_ratio,e500_ratio,half_freqSystemBus;
+ uint lcrr_div;
+ int i;
+#ifdef CONFIG_QE
+ u32 qe_ratio;
+#endif
+
+ plat_ratio = (gur->porpllsr) & 0x0000003e;
+ plat_ratio >>= 1;
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+
+ /* Divide before multiply to avoid integer
+ * overflow for processor speeds above 2GHz */
+ half_freqSystemBus = sysInfo->freqSystemBus/2;
+ for (i = 0; i < cpu_numcores(); i++) {
+ e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
+ sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+ }
+
+ /* Note: freqDDRBus is the MCLK frequency, not the data rate. */
+ sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+
+#ifdef CONFIG_DDR_CLK_FREQ
+ {
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+ if (ddr_ratio != 0x7)
+ sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+ }
+#endif
+#endif
+
+#ifdef CONFIG_QE
+ qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
+ >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
+ sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
+#endif
+
+#if defined(CONFIG_SYS_LBC_LCRR)
+ /* We will program LCRR to this value later */
+ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
+#else
+ {
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
+ }
+#endif
+ if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
+#if defined(CONFIG_FSL_CORENET)
+ /* If this is corenet based SoC, bit-representation
+ * for four times the clock divider values.
+ */
+ lcrr_div *= 4;
+#elif !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
+ !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
+ /*
+ * Yes, the entire PQ38 family use the same
+ * bit-representation for twice the clock divider values.
+ */
+ lcrr_div *= 2;
+#endif
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+ } else {
+ /* In case anyone cares what the unknown value is */
+ sysInfo->freqLocalBus = lcrr_div;
+ }
+}
+
+
+int get_clocks (void)
+{
+ sys_info_t sys_info;
+#ifdef CONFIG_MPC8544
+ volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#endif
+#if defined(CONFIG_CPM2)
+ volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
+ uint sccr, dfbrg;
+
+ /* set VCO = 4 * BRG */
+ cpm->im_cpm_intctl.sccr &= 0xfffffffc;
+ sccr = cpm->im_cpm_intctl.sccr;
+ dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
+#endif
+ get_sys_info (&sys_info);
+ gd->cpu_clk = sys_info.freqProcessor[0];
+ gd->bus_clk = sys_info.freqSystemBus;
+ gd->mem_clk = sys_info.freqDDRBus;
+ gd->lbc_clk = sys_info.freqLocalBus;
+
+#ifdef CONFIG_QE
+ gd->qe_clk = sys_info.freqQE;
+ gd->brg_clk = gd->qe_clk / 2;
+#endif
+ /*
+ * The base clock for I2C depends on the actual SOC. Unfortunately,
+ * there is no pattern that can be used to determine the frequency, so
+ * the only choice is to look up the actual SOC number and use the value
+ * for that SOC. This information is taken from application note
+ * AN2919.
+ */
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
+ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
+ gd->i2c1_clk = sys_info.freqSystemBus;
+#elif defined(CONFIG_MPC8544)
+ /*
+ * On the 8544, the I2C clock is the same as the SEC clock. This can be
+ * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
+ * 4.4.3.3 of the 8544 RM. Note that this might actually work for all
+ * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
+ * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
+ */
+ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
+ gd->i2c1_clk = sys_info.freqSystemBus / 3;
+ else
+ gd->i2c1_clk = sys_info.freqSystemBus / 2;
+#else
+ /* Most 85xx SOCs use CCB/2, so this is the default behavior. */
+ gd->i2c1_clk = sys_info.freqSystemBus / 2;
+#endif
+ gd->i2c2_clk = gd->i2c1_clk;
+
+#if defined(CONFIG_FSL_ESDHC)
+#ifdef CONFIG_MPC8569
+ gd->sdhc_clk = gd->bus_clk;
+#else
+ gd->sdhc_clk = gd->bus_clk / 2;
+#endif
+#endif /* defined(CONFIG_FSL_ESDHC) */
+
+#if defined(CONFIG_CPM2)
+ gd->vco_out = 2*sys_info.freqSystemBus;
+ gd->cpm_clk = gd->vco_out / 2;
+ gd->scc_clk = gd->vco_out / 4;
+ gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+#endif
+
+ if(gd->cpu_clk != 0) return (0);
+ else return (1);
+}
+
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ return gd->bus_clk;
+}
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq (ulong dummy)
+{
+ return gd->mem_clk;
+}
--- /dev/null
+/*
+ * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2003 Motorola,Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards
+ *
+ * The processor starts at 0xfffffffc and the code is first executed in the
+ * last 4K page(0xfffff000-0xffffffff) in flash/rom.
+ *
+ */
+
+#include <config.h>
+#include <mpc85xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+#ifndef CONFIG_NAND_SPL
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+#endif
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * e500 Startup -- after reset only the last 4KB of the effective
+ * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
+ * section is located at THIS LAST page and basically does three
+ * things: clear some registers, set up exception tables and
+ * add more TLB entries for 'larger spaces'(e.g. the boot rom) to
+ * continue the boot procedure.
+
+ * Once the boot rom is mapped by TLB entries we can proceed
+ * with normal startup.
+ *
+ */
+
+ .section .bootpg,"ax"
+ .globl _start_e500
+
+_start_e500:
+
+/* clear registers/arrays not reset by hardware */
+
+ /* L1 */
+ li r0,2
+ mtspr L1CSR0,r0 /* invalidate d-cache */
+ mtspr L1CSR1,r0 /* invalidate i-cache */
+
+ mfspr r1,DBSR
+ mtspr DBSR,r1 /* Clear all valid bits */
+
+ /*
+ * Enable L1 Caches early
+ *
+ */
+
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ li r2,(32 + 0)
+ mtspr L1CSR2,r2
+#endif
+
+ /* Enable/invalidate the I-Cache */
+ lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+ ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+ mtspr SPRN_L1CSR1,r2
+1:
+ mfspr r3,SPRN_L1CSR1
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+ ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+ mtspr SPRN_L1CSR1,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR1
+ andi. r1,r3,L1CSR1_ICE@l
+ beq 2b
+
+ /* Enable/invalidate the D-Cache */
+ lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+ ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+ mtspr SPRN_L1CSR0,r2
+1:
+ mfspr r3,SPRN_L1CSR0
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+ ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+ mtspr SPRN_L1CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR0
+ andi. r1,r3,L1CSR0_DCE@l
+ beq 2b
+
+ /* Setup interrupt vectors */
+ lis r1,TEXT_BASE@h
+ mtspr IVPR,r1
+
+ li r1,0x0100
+ mtspr IVOR0,r1 /* 0: Critical input */
+ li r1,0x0200
+ mtspr IVOR1,r1 /* 1: Machine check */
+ li r1,0x0300
+ mtspr IVOR2,r1 /* 2: Data storage */
+ li r1,0x0400
+ mtspr IVOR3,r1 /* 3: Instruction storage */
+ li r1,0x0500
+ mtspr IVOR4,r1 /* 4: External interrupt */
+ li r1,0x0600
+ mtspr IVOR5,r1 /* 5: Alignment */
+ li r1,0x0700
+ mtspr IVOR6,r1 /* 6: Program check */
+ li r1,0x0800
+ mtspr IVOR7,r1 /* 7: floating point unavailable */
+ li r1,0x0900
+ mtspr IVOR8,r1 /* 8: System call */
+ /* 9: Auxiliary processor unavailable(unsupported) */
+ li r1,0x0a00
+ mtspr IVOR10,r1 /* 10: Decrementer */
+ li r1,0x0b00
+ mtspr IVOR11,r1 /* 11: Interval timer */
+ li r1,0x0c00
+ mtspr IVOR12,r1 /* 12: Watchdog timer */
+ li r1,0x0d00
+ mtspr IVOR13,r1 /* 13: Data TLB error */
+ li r1,0x0e00
+ mtspr IVOR14,r1 /* 14: Instruction TLB error */
+ li r1,0x0f00
+ mtspr IVOR15,r1 /* 15: Debug */
+
+ /* Clear and set up some registers. */
+ li r0,0x0000
+ lis r1,0xffff
+ mtspr DEC,r0 /* prevent dec exceptions */
+ mttbl r0 /* prevent fit & wdt exceptions */
+ mttbu r0
+ mtspr TSR,r1 /* clear all timer exception status */
+ mtspr TCR,r0 /* disable all */
+ mtspr ESR,r0 /* clear exception syndrome register */
+ mtspr MCSR,r0 /* machine check syndrome register */
+ mtxer r0 /* clear integer exception register */
+
+#ifdef CONFIG_SYS_BOOK3E_HV
+ mtspr MAS8,r0 /* make sure MAS8 is clear */
+#endif
+
+ /* Enable Time Base and Select Time Base Clock */
+ lis r0,HID0_EMCP@h /* Enable machine check */
+#if defined(CONFIG_ENABLE_36BIT_PHYS)
+ ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
+#endif
+#ifndef CONFIG_E500MC
+ ori r0,r0,HID0_TBEN@l /* Enable Timebase */
+#endif
+ mtspr HID0,r0
+
+#ifndef CONFIG_E500MC
+ li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r3,PVR
+ andi. r3,r3, 0xff
+ cmpwi r3,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r0, r0, HID1_MBDD@l
+1:
+ mtspr HID1,r0
+#endif
+
+ /* Enable Branch Prediction */
+#if defined(CONFIG_BTB)
+ lis r0,BUCSR_ENABLE@h
+ ori r0,r0,BUCSR_ENABLE@l
+ mtspr SPRN_BUCSR,r0
+#endif
+
+#if defined(CONFIG_SYS_INIT_DBCR)
+ lis r1,0xffff
+ ori r1,r1,0xffff
+ mtspr DBSR,r1 /* Clear all status bits */
+ lis r0,CONFIG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */
+ ori r0,r0,CONFIG_SYS_INIT_DBCR@l
+ mtspr DBCR0,r0
+#endif
+
+#ifdef CONFIG_MPC8569
+#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
+#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
+
+ /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
+ * use address space which is more than 12bits, and it must be done in
+ * the 4K boot page. So we set this bit here.
+ */
+
+ /* create a temp mapping TLB0[0] for LBCR */
+ lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
+
+ lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* Set LBCR register */
+ lis r4,CONFIG_SYS_LBCR_ADDR@h
+ ori r4,r4,CONFIG_SYS_LBCR_ADDR@l
+
+ lis r5,CONFIG_SYS_LBC_LBCR@h
+ ori r5,r5,CONFIG_SYS_LBC_LBCR@l
+ stw r5,0(r4)
+ isync
+
+ /* invalidate this temp TLB */
+ lis r4,CONFIG_SYS_LBC_ADDR@h
+ ori r4,r4,CONFIG_SYS_LBC_ADDR@l
+ tlbivax 0,r4
+ isync
+
+#endif /* CONFIG_MPC8569 */
+
+ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+
+#ifndef CONFIG_SYS_RAMBOOT
+ /* create a temp mapping in AS=1 to the 4M boot window */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
+
+ /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
+ lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+ /*
+ * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+ * image has been relocated to TEXT_BASE on the second stage.
+ */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* create a temp mapping in AS=1 to the stack */
+ lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
+
+ lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ lis r6,MSR_IS|MSR_DS@h
+ ori r6,r6,MSR_IS|MSR_DS@l
+ lis r7,switch_as@h
+ ori r7,r7,switch_as@l
+
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+
+switch_as:
+/* L1 DCache is used for initial RAM */
+
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+ mfspr r2, L1CFG0
+ andi. r2, r2, 0x1ff
+ /* cache size * 1024 / (2 * L1 line size) */
+ slwi r2, r2, (10 - 1 - L1_CACHE_SHIFT)
+ mtctr r2
+ li r0,0
+1:
+ dcbz r0,r3
+ dcbtls 0,r0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+
+ /* Jump out the last 4K page and continue to 'normal' start */
+#ifdef CONFIG_SYS_RAMBOOT
+ b _start_cont
+#else
+ /* Calculate absolute address in FLASH and jump there */
+ /*--------------------------------------------------------------*/
+ lis r3,CONFIG_SYS_MONITOR_BASE@h
+ ori r3,r3,CONFIG_SYS_MONITOR_BASE@l
+ addi r3,r3,_start_cont - _start + _START_OFFSET
+ mtlr r3
+ blr
+#endif
+
+ .text
+ .globl _start
+_start:
+ .long 0x27051956 /* U-BOOT Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ .align 4
+ .globl _start_cont
+_start_cont:
+ /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
+ lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
+
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0,RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+
+ GET_GOT
+ bl cpu_init_early_f
+
+ /* switch back to AS = 0 */
+ lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
+ ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
+ mtmsr r3
+ isync
+
+ bl cpu_init_f
+ bl board_init_f
+ isync
+
+#ifndef CONFIG_NAND_SPL
+ . = EXC_OFF_SYS_RESET
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+ CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
+
+/* Machine check */
+ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x0300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x0400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
+
+/* Alignment exception. */
+ . = 0x0600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x0700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* No FPU on MPC85xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
+
+ . = 0x0900
+/*
+ * r0 - SYSCALL number
+ * r3-... arguments
+ */
+SystemCall:
+ addis r11,r0,0 /* get functions table addr */
+ ori r11,r11,0 /* Note: this code is patched in trap_init */
+ addis r12,r0,0 /* get number of functions */
+ ori r12,r12,0
+
+ cmplw 0,r0,r12
+ bge 1f
+
+ rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
+ add r11,r11,r0
+ lwz r11,0(r11)
+
+ li r20,0xd00-4 /* Get stack pointer */
+ lwz r12,0(r20)
+ subi r12,r12,12 /* Adjust stack pointer */
+ li r0,0xc00+_end_back-SystemCall
+ cmplw 0,r0,r12 /* Check stack overflow */
+ bgt 1f
+ stw r12,0(r20)
+
+ mflr r0
+ stw r0,0(r12)
+ mfspr r0,SRR0
+ stw r0,4(r12)
+ mfspr r0,SRR1
+ stw r0,8(r12)
+
+ li r12,0xc00+_back-SystemCall
+ mtlr r12
+ mtspr SRR0,r11
+
+1: SYNC
+ rfi
+_back:
+
+ mfmsr r11 /* Disable interrupts */
+ li r12,0
+ ori r12,r12,MSR_EE
+ andc r11,r11,r12
+ SYNC /* Some chip revs need this... */
+ mtmsr r11
+ SYNC
+
+ li r12,0xd00-4 /* restore regs */
+ lwz r12,0(r12)
+
+ lwz r11,0(r12)
+ mtlr r11
+ lwz r11,4(r12)
+ mtspr SRR0,r11
+ lwz r11,8(r12)
+ mtspr SRR1,r11
+
+ addi r12,r12,12 /* Adjust stack pointer */
+ li r20,0xd00-4
+ stw r12,0(r20)
+
+ SYNC
+ rfi
+_end_back:
+
+ STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
+ STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
+
+ STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
+
+ CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = . + (0x100 - ( . & 0xff )) /* align for debug */
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+crit_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_CSRR0,r2
+ mtspr SPRN_CSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfci
+
+mck_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_MCSRR0,r2
+ mtspr SPRN_MCSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfmci
+
+/* Cache functions.
+*/
+.globl invalidate_icache
+invalidate_icache:
+ mfspr r0,L1CSR1
+ ori r0,r0,L1CSR1_ICFI
+ msync
+ isync
+ mtspr L1CSR1,r0
+ isync
+ blr /* entire I cache */
+
+.globl invalidate_dcache
+invalidate_dcache:
+ mfspr r0,L1CSR0
+ ori r0,r0,L1CSR0_DCFI
+ msync
+ isync
+ mtspr L1CSR0,r0
+ isync
+ blr
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ mfspr r4,L1CSR1
+ ori r4,r4,0x0001
+ oris r4,r4,0x0001
+ mtspr L1CSR1,r4
+ isync
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r0,L1CSR1
+ lis r3,0
+ ori r3,r3,L1CSR1_ICE
+ andc r0,r0,r3
+ mtspr L1CSR1,r0
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3,L1CSR1
+ andi. r3,r3,L1CSR1_ICE
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ mfspr r0,L1CSR0
+ ori r0,r0,0x0001
+ oris r0,r0,0x0001
+ msync
+ isync
+ mtspr L1CSR0,r0
+ isync
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3,L1CSR0
+ lis r4,0
+ ori r4,r4,L1CSR0_DCE
+ andc r3,r3,r4
+ mtspr L1CSR0,r0
+ isync
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3,L1CSR0
+ andi. r3,r3,L1CSR0_DCE
+ blr
+
+ .globl get_pir
+get_pir:
+ mfspr r3,PIR
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3,PVR
+ blr
+
+ .globl get_svr
+get_svr:
+ mfspr r3,SVR
+ blr
+
+ .globl wr_tcr
+wr_tcr:
+ mtspr TCR,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ sync
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+#endif /* !CONFIG_NAND_SPL */
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void write_tlb(mas0, mas1, mas2, mas3, mas7)
+ */
+ .globl write_tlb
+write_tlb:
+ mtspr MAS0,r3
+ mtspr MAS1,r4
+ mtspr MAS2,r5
+ mtspr MAS3,r6
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr MAS7,r7
+#endif
+ li r3,0
+#ifdef CONFIG_SYS_BOOK3E_HV
+ mtspr MAS8,r3
+#endif
+ isync
+ tlbwe
+ msync
+ isync
+ blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1,r3 /* Set new stack pointer */
+ mr r9,r4 /* Save copy of Init Data pointer */
+ mr r10,r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3,r5 /* Destination Address */
+ lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4,r4,CONFIG_SYS_MONITOR_BASE@l
+ lwz r5,GOT(__init_end)
+ sub r5,r5,r4
+ li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15,r10,r4
+
+ /* First our own GOT */
+ add r12,r12,r15
+ /* the the one used by the C code */
+ add r30,r30,r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+ /*
+ * Re-point the IVPR at RAM
+ */
+ mtspr IVPR,r10
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0,r10,in_ram - _start + _START_OFFSET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+ .globl in_ram
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0,r3,r4
+ beq 6f
+
+ li r0,0
+5:
+ stw r0,0(r3)
+ addi r3,r3,4
+ cmplw 0,r3,r4
+ bne 5b
+6:
+
+ mr r3,r9 /* Init Data pointer */
+ mr r4,r10 /* Destination Address */
+ bl board_init_r
+
+#ifndef CONFIG_NAND_SPL
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7,GOT(_start_of_vectors)
+ lwz r8,GOT(_end_of_vectors)
+
+ li r9,0x100 /* reset vector always at 0x100 */
+
+ cmplw 0,r7,r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0,0(r7)
+ stw r0,0(r9)
+ addi r7,r7,4
+ addi r9,r9,4
+ cmplw 0,r7,r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7,.L_CriticalInput - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_MachineCheck - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_DataStorage - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_InstStorage - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_ExtInterrupt - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_Alignment - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_ProgramCheck - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_FPUnavailable - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_Decrementer - _start + _START_OFFSET
+ bl trap_reloc
+ li r7,.L_IntervalTimer - _start + _START_OFFSET
+ li r8,_end_of_vectors - _start + _START_OFFSET
+2:
+ bl trap_reloc
+ addi r7,r7,0x100 /* next exception vector */
+ cmplw 0,r7,r8
+ blt 2b
+
+ lis r7,0x0
+ mtspr IVPR,r7
+
+ mtlr r4 /* restore link register */
+ blr
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
+ ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
+ mfspr r4,L1CFG0
+ andi. r4,r4,0x1ff
+ slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
+ mtctr r4
+1: dcbi r0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+ sync
+
+ /* Invalidate the TLB entries for the cache */
+ lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ addi r3,r3,0x1000
+ tlbivax 0,r3
+ isync
+ blr
+
+.globl flush_dcache
+flush_dcache:
+ mfspr r3,SPRN_L1CFG0
+
+ rlwinm r5,r3,9,3 /* Extract cache block size */
+ twlgti r5,1 /* Only 32 and 64 byte cache blocks
+ * are currently defined.
+ */
+ li r4,32
+ subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
+ * log2(number of ways)
+ */
+ slw r5,r4,r5 /* r5 = cache block size */
+
+ rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
+ mulli r7,r7,13 /* An 8-way cache will require 13
+ * loads per set.
+ */
+ slw r7,r7,r6
+
+ /* save off HID0 and set DCFA */
+ mfspr r8,SPRN_HID0
+ ori r9,r8,HID0_DCFA@l
+ mtspr SPRN_HID0,r9
+ isync
+
+ lis r4,0
+ mtctr r7
+
+1: lwz r3,0(r4) /* Load... */
+ add r4,r4,r5
+ bdnz 1b
+
+ msync
+ lis r4,0
+ mtctr r7
+
+1: dcbf 0,r4 /* ...and flush. */
+ add r4,r4,r5
+ bdnz 1b
+
+ /* restore HID0 */
+ mtspr SPRN_HID0,r8
+ isync
+
+ blr
+
+.globl setup_ivors
+setup_ivors:
+
+#include "fixed_ivor.S"
+ blr
+#endif /* !CONFIG_NAND_SPL */
--- /dev/null
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void invalidate_tlb(u8 tlb)
+{
+ if (tlb == 0)
+ mtspr(MMUCSR0, 0x4);
+ if (tlb == 1)
+ mtspr(MMUCSR0, 0x2);
+}
+
+void init_tlbs(void)
+{
+ int i;
+
+ for (i = 0; i < num_tlb_entries; i++) {
+ write_tlb(tlb_table[i].mas0,
+ tlb_table[i].mas1,
+ tlb_table[i].mas2,
+ tlb_table[i].mas3,
+ tlb_table[i].mas7);
+ }
+
+ return ;
+}
+
+#ifndef CONFIG_NAND_SPL
+static inline void use_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] |= (1 << bit);
+}
+
+static inline void free_tlb_cam(u8 idx)
+{
+ int i = idx / 32;
+ int bit = idx % 32;
+
+ gd->used_tlb_cams[i] &= ~(1 << bit);
+}
+
+void init_used_tlb_cams(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
+ gd->used_tlb_cams[i] = 0;
+
+ /* walk all the entries */
+ for (i = 0; i < num_cam; i++) {
+ u32 _mas1;
+
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
+
+ asm volatile("tlbre;isync");
+ _mas1 = mfspr(MAS1);
+
+ /* if the entry isn't valid skip it */
+ if ((_mas1 & MAS1_VALID))
+ use_tlb_cam(i);
+ }
+}
+
+int find_free_tlbcam(void)
+{
+ int i;
+ u32 idx;
+
+ for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
+ idx = ffz(gd->used_tlb_cams[i]);
+
+ if (idx != 32)
+ break;
+ }
+
+ idx += i * 32;
+
+ if (idx >= CONFIG_SYS_NUM_TLBCAMS)
+ return -1;
+
+ return idx;
+}
+
+void set_tlb(u8 tlb, u32 epn, u64 rpn,
+ u8 perms, u8 wimge,
+ u8 ts, u8 esel, u8 tsize, u8 iprot)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ if (tlb == 1)
+ use_tlb_cam(esel);
+
+ _mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
+ _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
+ _mas2 = FSL_BOOKE_MAS2(epn, wimge);
+ _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
+ _mas7 = FSL_BOOKE_MAS7(rpn);
+
+ write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
+
+#ifdef CONFIG_ADDR_MAP
+ if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
+ addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
+#endif
+}
+
+void disable_tlb(u8 esel)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ free_tlb_cam(esel);
+
+ _mas0 = FSL_BOOKE_MAS0(1, esel, 0);
+ _mas1 = 0;
+ _mas2 = 0;
+ _mas3 = 0;
+ _mas7 = 0;
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr(MAS7, _mas7);
+#endif
+ asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+ if (gd->flags & GD_FLG_RELOC)
+ addrmap_set_entry(0, 0, 0, esel);
+#endif
+}
+
+static void tlbsx (const volatile unsigned *addr)
+{
+ __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
+}
+
+/* return -1 if we didn't find anything */
+int find_tlb_idx(void *addr, u8 tlbsel)
+{
+ u32 _mas0, _mas1;
+
+ /* zero out Search PID, AS */
+ mtspr(MAS6, 0);
+
+ tlbsx(addr);
+
+ _mas0 = mfspr(MAS0);
+ _mas1 = mfspr(MAS1);
+
+ /* we found something, and its in the TLB we expect */
+ if ((MAS1_VALID & _mas1) &&
+ (MAS0_TLBSEL(tlbsel) == (_mas0 & MAS0_TLBSEL_MSK))) {
+ return ((_mas0 & MAS0_ESEL_MSK) >> 16);
+ }
+
+ return -1;
+}
+
+#ifdef CONFIG_ADDR_MAP
+void init_addr_map(void)
+{
+ int i;
+ unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+ /* walk all the entries */
+ for (i = 0; i < num_cam; i++) {
+ unsigned long epn;
+ u32 tsize, _mas1;
+ phys_addr_t rpn;
+
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
+
+ asm volatile("tlbre;isync");
+ _mas1 = mfspr(MAS1);
+
+ /* if the entry isn't valid skip it */
+ if (!(_mas1 & MAS1_VALID))
+ continue;
+
+ tsize = (_mas1 >> 8) & 0xf;
+ epn = mfspr(MAS2) & MAS2_EPN;
+ rpn = mfspr(MAS3) & MAS3_RPN;
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ rpn |= ((phys_addr_t)mfspr(MAS7)) << 32;
+#endif
+
+ addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i);
+ }
+
+ return ;
+}
+#endif
+
+unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
+{
+ int i;
+ unsigned int tlb_size;
+ unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
+ unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+ u64 size, memsize = (u64)memsize_in_meg << 20;
+
+ size = min(memsize, CONFIG_MAX_MEM_MAPPED);
+
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
+
+ for (i = 0; size && i < 8; i++) {
+ int ram_tlb_index = find_free_tlbcam();
+ u32 camsize = __ilog2_u64(size) & ~1U;
+ u32 align = __ilog2(ram_tlb_address) & ~1U;
+
+ if (ram_tlb_index == -1)
+ break;
+
+ if (align == -2) align = max_cam;
+ if (camsize > align)
+ camsize = align;
+
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ tlb_size = (camsize - 10) / 2;
+
+ set_tlb(1, ram_tlb_address, ram_tlb_address,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, ram_tlb_index, tlb_size, 1);
+
+ size -= 1ULL << camsize;
+ memsize -= 1ULL << camsize;
+ ram_tlb_address += 1UL << camsize;
+ }
+
+ if (memsize)
+ print_size(memsize, " left unmapped\n");
+
+ /*
+ * Confirm that the requested amount of memory was mapped.
+ */
+ return memsize_in_meg;
+}
+#endif /* !CONFIG_NAND_SPL */
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright 2007 Freescale Semiconductor.
+ * Copyright (C) 2003 Motorola
+ * Modified by Xianghua Xiao(x.xiao@motorola.com)
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
+
+static __inline__ void set_tsr(unsigned long val)
+{
+ asm volatile("mtspr 0x150, %0" : : "r" (val));
+}
+
+static __inline__ unsigned long get_esr(void)
+{
+ unsigned long val;
+ asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
+ return val;
+}
+
+#define ESR_MCI 0x80000000
+#define ESR_PIL 0x08000000
+#define ESR_PPR 0x04000000
+#define ESR_PTR 0x02000000
+#define ESR_DST 0x00800000
+#define ESR_DIZ 0x00400000
+#define ESR_U0F 0x00008000
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+CritcalInputException(struct pt_regs *regs)
+{
+ panic("Critical Input Exception");
+}
+
+int machinecheck_count = 0;
+int machinecheck_error = 0;
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+ unsigned int mcsr, mcsrr0, mcsrr1, mcar;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+ mcsrr0 = mfspr(SPRN_MCSRR0);
+ mcsrr1 = mfspr(SPRN_MCSRR1);
+ mcsr = mfspr(SPRN_MCSR);
+ mcar = mfspr(SPRN_MCAR);
+
+ machinecheck_count++;
+ machinecheck_error=1;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from mcsr): ");
+ printf("mcsr = 0x%08x\n", mcsr);
+ if (mcsr & 0x80000000)
+ printf("Machine check input pin\n");
+ if (mcsr & 0x40000000)
+ printf("Instruction cache parity error\n");
+ if (mcsr & 0x20000000)
+ printf("Data cache push parity error\n");
+ if (mcsr & 0x10000000)
+ printf("Data cache parity error\n");
+ if (mcsr & 0x00000080)
+ printf("Bus instruction address error\n");
+ if (mcsr & 0x00000040)
+ printf("Bus Read address error\n");
+ if (mcsr & 0x00000020)
+ printf("Bus Write address error\n");
+ if (mcsr & 0x00000010)
+ printf("Bus Instruction data bus error\n");
+ if (mcsr & 0x00000008)
+ printf("Bus Read data bus error\n");
+ if (mcsr & 0x00000004)
+ printf("Bus Write bus error\n");
+ if (mcsr & 0x00000002)
+ printf("Bus Instruction parity error\n");
+ if (mcsr & 0x00000001)
+ printf("Bus Read parity error\n");
+
+ show_regs(regs);
+ printf("MCSR=0x%08x \tMCSRR0=0x%08x \nMCSRR1=0x%08x \tMCAR=0x%08x\n",
+ mcsr, mcsrr0, mcsrr1, mcar);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ if (machinecheck_count > 10) {
+ panic("machine check count too high\n");
+ }
+
+ if (machinecheck_count > 1) {
+ regs->nip += 4; /* skip offending instruction */
+ printf("Skipping current instr, Returning to 0x%08lx\n",
+ regs->nip);
+ } else {
+ printf("Returning back to 0x%08lx\n",regs->nip);
+ }
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ long esr_val;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+
+ esr_val = get_esr();
+ if( esr_val & ESR_PIL )
+ printf( "** Illegal Instruction **\n" );
+ else if( esr_val & ESR_PPR )
+ printf( "** Privileged Instruction **\n" );
+ else if( esr_val & ESR_PTR )
+ printf( "** Trap Instruction **\n" );
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+PITException(struct pt_regs *regs)
+{
+ /*
+ * Reset PIT interrupt
+ */
+ set_tsr(0x0c000000);
+
+ /*
+ * Call timer_interrupt routine in interrupts.c
+ */
+ timer_interrupt(NULL);
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+void
+ExtIntException(struct pt_regs *regs)
+{
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+
+ uint vect;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
+ regs->nip, regs->msr, regs->trap);
+ vect = pic->iack0;
+ printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect);
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+}
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ *(.got1)
+ } :text
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } :text
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ .bootpg ADDR(.text) - 0x1000 :
+ {
+ arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
+ } :text = 0xffff
+
+ . = ADDR(.text) + 0x80000;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ } :bss
+
+ . = ALIGN(4);
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ *
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ . = 0xfff00000;
+ .text : {
+ *(.text)
+ }
+ _etext = .;
+
+ .reloc : {
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ . = ALIGN(8);
+ .data : {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+
+ . = ALIGN(8);
+ __init_begin = .;
+ __init_end = .;
+
+ .resetvec ADDR(.text) + 0xffc : {
+ *(.resetvec)
+ } = 0xffff
+
+ __bss_start = .;
+ .bss : {
+ *(.sbss)
+ *(.bss)
+ }
+ _end = .;
+}
+ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big");
--- /dev/null
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ *(.got1)
+ } :text
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } :text
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ .bootpg RESET_VECTOR_ADDRESS - 0xffc :
+ {
+ arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
+ } :text = 0xffff
+
+ .resetvec RESET_VECTOR_ADDRESS :
+ {
+ *(.resetvec)
+ } :text = 0xffff
+
+ . = RESET_VECTOR_ADDRESS + 0x4;
+
+ /*
+ * Make sure that the bss segment isn't linked at 0x0, otherwise its
+ * address won't be updated during relocation fixups. Note that
+ * this is a temporary fix. Code to dynamically the fixup the bss
+ * location will be added in the future. When the bss relocation
+ * fixup code is present this workaround should be removed.
+ */
+#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
+ . |= 0x10;
+#endif
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ } :bss
+
+ . = ALIGN(4);
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+#
+# Copyright 2007 Freescale Semiconductor, Inc.
+# (C) Copyright 2002,2003 Motorola Inc.
+# Xianghua Xiao,X.Xiao@motorola.com
+#
+# (C) Copyright 2004 Freescale Semiconductor. (MC86xx Port)
+# Jeff Brown
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+
+SOBJS-y += cache.o
+SOBJS-$(CONFIG_MP) += release.o
+
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+# 8610 & 8641 are identical w/regards to DDR
+COBJS-$(CONFIG_MPC8610) += ddr-8641.o
+COBJS-$(CONFIG_MPC8641) += ddr-8641.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-y += interrupts.o
+COBJS-$(CONFIG_MP) += mp.o
+COBJS-y += speed.o
+COBJS-y += traps.o
+
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(ASOBJS) $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Most of this code is taken from 74xx_7xx/cache.S
+ * and then cleaned up a bit
+ */
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+ /* use invalidate-all bit in HID0 */
+ mfspr r3,HID0
+ ori r3,r3,HID0_ICFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+ mfspr r3,HID0
+ ori r3,r3,HID0_DCFI
+ mtspr HID0,r3
+ isync
+ blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_dcache)
+ lis r3,0
+ lis r5,CACHE_LINE_SIZE
+flush:
+ cmp 0,1,r3,r5
+ bge done
+ lwz r5,0(r3)
+ lis r5,CACHE_LINE_SIZE
+ addi r3,r3,0x4
+ b flush
+done:
+ blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 2b
+ sync /* additional sync needed on g4 */
+ isync
+ blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5 /* align r3 down to cache line */
+ subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
+ add r4,r4,r5 /* r4 += cache_line_size-1 */
+ srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
+ beqlr /* if r4 == 0 return */
+ mtctr r4 /* ctr = r4 */
+
+ sync
+1: dcbst 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbf 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbf's to get to ram */
+ blr
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+ li r5,CACHE_LINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,LG_CACHE_LINE_SIZE
+ beqlr
+ mtctr r4
+
+ sync
+1: dcbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbi's to get to ram */
+ blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ * void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+ rlwinm r3,r3,0,0,19 /* Get page base address */
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+ mr r6,r3
+0: dcbst 0,r3 /* Write line to ram */
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 0b
+ sync
+ mtctr r4
+1: icbi 0,r6
+ addi r6,r6,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ * void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+ li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
+ mtctr r4
+1: icbi 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ sync
+ isync
+ blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced). This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+ li r0,4096/CACHE_LINE_SIZE
+ mtctr r0
+1: dcbz 0,r3
+ addi r3,r3,CACHE_LINE_SIZE
+ bdnz 1b
+ blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+ mfspr r3, HID0
+ li r5, HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r5
+ ori r3, r3, HID0_ICE
+ ori r5, r3, HID0_ICFI
+ mtspr HID0, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+ mflr r4
+ bl invalidate_l1_instruction_cache /* uses r3 */
+ sync
+ mtlr r4
+ mfspr r3, HID0
+ li r5, 0
+ ori r5, r5, HID0_ICE
+ andc r3, r3, r5
+ mtspr HID0, r3
+ isync
+ blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_ICE
+ blr
+
+
+_GLOBAL(l1dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+ blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+#ifdef CONFIG_SYS_L2
+ mflr r5
+ bl l2cache_enable /* uses r3 and r4 */
+ sync
+ mtlr r5
+#endif
+ blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_dcache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+ mflr r4 /* save link register */
+ bl flush_dcache /* uses r3 and r5 */
+ sync
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ li r5, HID0_DCE|HID0_DCFI
+ andc r3, r3, r5 /* no enable, no invalidate */
+ mtspr HID0, r3
+ sync
+#ifdef CONFIG_SYS_L2
+ bl l2cache_disable_no_flush /* uses r3 */
+#endif
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+ mfspr r3, HID0
+ andi. r3, r3, HID0_DCE
+ blr
+
+/*
+ * Invalidate L2 cache using L2I, assume L2 is enabled
+ */
+_GLOBAL(l2cache_invalidate)
+ mfspr r3, l2cr
+ rlwinm. r3, r3, 0, 0, 0
+ beq 1f
+
+ mfspr r3, l2cr
+ rlwinm r3, r3, 0, 1, 31
+
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
+ sync
+ mtspr l2cr, r3
+ sync
+1: mfspr r3, l2cr
+ oris r3, r3, L2CR_L2I@h
+ mtspr l2cr, r3
+
+invl2:
+ mfspr r3, l2cr
+ andis. r3, r3, L2CR_L2I@h
+ bne invl2
+ blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+ mflr r4 /* save link register */
+ bl l2cache_invalidate /* uses r3 */
+ sync
+ lis r3, L2_ENABLE@h
+ ori r3, r3, L2_ENABLE@l
+ mtspr l2cr, r3
+ isync
+ mtlr r4 /* restore link register */
+ blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_dcache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+ mflr r4 /* save link register */
+ bl flush_dcache /* uses r3 and r5 */
+ sync
+ mtlr r4 /* restore link register */
+l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
+ lis r3, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ mtspr l2cr, r3
+ isync
+ blr
--- /dev/null
+#
+# (C) Copyright 2004 Freescale Semiconductor.
+# Jeff Brown
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -ffixed-r2 -mstring
+PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
--- /dev/null
+/*
+ * Copyright 2006,2009-2010 Freescale Semiconductor, Inc.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <mpc86xx.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Default board reset function
+ */
+static void
+__board_reset(void)
+{
+ /* Do nothing */
+}
+void board_reset(void) __attribute__((weak, alias("__board_reset")));
+
+
+int
+checkcpu(void)
+{
+ sys_info_t sysinfo;
+ uint pvr, svr;
+ uint ver;
+ uint major, minor;
+ char buf1[32], buf2[32];
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ struct cpu_type *cpu;
+ uint msscr0 = mfspr(MSSCR0);
+
+ svr = get_svr();
+ ver = SVR_SOC_VER(svr);
+ major = SVR_MAJ(svr);
+ minor = SVR_MIN(svr);
+
+ if (cpu_numcores() > 1) {
+#ifndef CONFIG_MP
+ puts("Unicore software on multiprocessor system!!\n"
+ "To enable mutlticore build define CONFIG_MP\n");
+#endif
+ }
+ puts("CPU: ");
+
+ cpu = gd->cpu;
+
+ puts(cpu->name);
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+ puts("Core: ");
+
+ pvr = get_pvr();
+ ver = PVR_E600_VER(pvr);
+ major = PVR_E600_MAJ(pvr);
+ minor = PVR_E600_MIN(pvr);
+
+ printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
+ if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
+ puts("\n Core1Translation Enabled");
+ debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+
+ get_sys_info(&sysinfo);
+
+ puts("Clock Configuration:\n");
+ printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
+ printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+ printf(" DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, sysinfo.freqSystemBus / 2),
+ strmhz(buf2, sysinfo.freqSystemBus));
+
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ } else {
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freqLocalBus);
+ }
+
+ puts("L1: D-cache 32 KB enabled\n");
+ puts(" I-cache 32 KB enabled\n");
+
+ puts("L2: ");
+ if (get_l2cr() & 0x80000000) {
+#if defined(CONFIG_MPC8610)
+ puts("256");
+#elif defined(CONFIG_MPC8641)
+ puts("512");
+#endif
+ puts(" KB enabled\n");
+ } else {
+ puts("Disabled\n");
+ }
+
+ return 0;
+}
+
+
+void
+do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+
+ /* Attempt board-specific reset */
+ board_reset();
+
+ /* Next try asserting HRESET_REQ */
+ out_be32(&gur->rstcr, MPC86xx_RSTCR_HRST_REQ);
+
+ while (1)
+ ;
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long
+get_tbclk(void)
+{
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+ return (sys_info.freqSystemBus + 3L) / 4L;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void
+watchdog_reset(void)
+{
+#if defined(CONFIG_MPC8610)
+ /*
+ * This actually feed the hard enabled watchdog.
+ */
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ccsr_wdt_t *wdt = &immap->im_wdt;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ u32 tmp = gur->pordevsr;
+
+ if (tmp & 0x4000) {
+ wdt->swsrr = 0x556c;
+ wdt->swsrr = 0xaa39;
+ }
+#endif
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Print out the state of various machine registers.
+ * Currently prints out LAWs, BR0/OR0, and BATs
+ */
+void mpc86xx_reginfo(void)
+{
+ immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ ccsr_lbc_t *lbc = &immap->im_lbc;
+
+ print_bats();
+ print_laws();
+
+ printf ("Local Bus Controller Registers\n"
+ "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
+ printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
+ printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
+ printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
+ printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
+ printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
+ printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
+ printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
+
+}
+
+/*
+ * Set the DDR BATs to reflect the actual size of DDR.
+ *
+ * dram_size is the actual size of DDR, in bytes
+ *
+ * Note: we assume that CONFIG_MAX_MEM_MAPPED is 2G or smaller as we only
+ * are using a single BAT to cover DDR.
+ *
+ * If this is not true, (e.g. CONFIG_MAX_MEM_MAPPED is 2GB but HID0_XBSEN
+ * is not defined) then we might have a situation where U-Boot will attempt
+ * to relocated itself outside of the region mapped by DBAT0.
+ * This will cause a machine check.
+ *
+ * Currently we are limited to power of two sized DDR since we only use a
+ * single bat. If a non-power of two size is used that is less than
+ * CONFIG_MAX_MEM_MAPPED u-boot will crash.
+ *
+ */
+void setup_ddr_bat(phys_addr_t dram_size)
+{
+ unsigned long batu, bl;
+
+ bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED));
+
+ if (BATU_SIZE(bl) != dram_size) {
+ u64 sz = (u64)dram_size - BATU_SIZE(bl);
+ print_size(sz, " left unmapped\n");
+ }
+
+ batu = bl | BATU_VS | BATU_VP;
+ write_bat(DBAT0, batu, CONFIG_SYS_DBAT0L);
+ write_bat(IBAT0, batu, CONFIG_SYS_IBAT0L);
+}
--- /dev/null
+/*
+ * Copyright 2004,2009 Freescale Semiconductor, Inc.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * cpu_init.c - low level cpu init
+ */
+
+#include <config.h>
+#include <common.h>
+#include <mpc86xx.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
+#include <asm/mp.h>
+
+void setup_bats(void);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map
+ * initialize a bunch of registers
+ */
+
+void cpu_init_f(void)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+#ifdef CONFIG_FSL_LAW
+ init_laws();
+#endif
+
+ setup_bats();
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CONFIG_SYS_OR0_REMAP)
+ memctl->or0 = CONFIG_SYS_OR0_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+ memctl->or1 = CONFIG_SYS_OR1_REMAP;
+#endif
+
+ /* now restrict to preliminary range */
+#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
+ memctl->br0 = CONFIG_SYS_BR0_PRELIM;
+ memctl->or0 = CONFIG_SYS_OR0_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ memctl->or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ memctl->or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ memctl->or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ memctl->or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->br4 = CONFIG_SYS_BR4_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ memctl->or5 = CONFIG_SYS_OR5_PRELIM;
+ memctl->br5 = CONFIG_SYS_BR5_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ memctl->or6 = CONFIG_SYS_OR6_PRELIM;
+ memctl->br6 = CONFIG_SYS_BR6_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ memctl->or7 = CONFIG_SYS_OR7_PRELIM;
+ memctl->br7 = CONFIG_SYS_BR7_PRELIM;
+#endif
+#if defined(CONFIG_FSL_DMA)
+ dma_init();
+#endif
+
+ /* enable the timebase bit in HID0 */
+ set_hid0(get_hid0() | 0x4000000);
+
+ /* enable EMCP, SYNCBE | ABE bits in HID1 */
+ set_hid1(get_hid1() | 0x80000C00);
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+#if defined(CONFIG_MP)
+ setup_mp();
+#endif
+ return 0;
+}
+
+/* Set up BAT registers */
+void setup_bats(void)
+{
+#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L)
+ write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L);
+#endif
+#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
+ write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L);
+#endif
+ write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L);
+ write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L);
+ write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L);
+ write_bat(IBAT2, CONFIG_SYS_IBAT2U, CONFIG_SYS_IBAT2L);
+ write_bat(DBAT3, CONFIG_SYS_DBAT3U, CONFIG_SYS_DBAT3L);
+ write_bat(IBAT3, CONFIG_SYS_IBAT3U, CONFIG_SYS_IBAT3L);
+ write_bat(DBAT4, CONFIG_SYS_DBAT4U, CONFIG_SYS_DBAT4L);
+ write_bat(IBAT4, CONFIG_SYS_IBAT4U, CONFIG_SYS_IBAT4L);
+ write_bat(DBAT5, CONFIG_SYS_DBAT5U, CONFIG_SYS_DBAT5L);
+ write_bat(IBAT5, CONFIG_SYS_IBAT5U, CONFIG_SYS_IBAT5L);
+ write_bat(DBAT6, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
+ write_bat(IBAT6, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
+ write_bat(DBAT7, CONFIG_SYS_DBAT7U, CONFIG_SYS_DBAT7L);
+ write_bat(IBAT7, CONFIG_SYS_IBAT7U, CONFIG_SYS_IBAT7L);
+
+ return;
+}
+
+#ifdef CONFIG_ADDR_MAP
+/* Initialize address mapping array */
+void init_addr_map(void)
+{
+ int i;
+ ppc_bat_t bat = DBAT0;
+ phys_size_t size;
+ unsigned long upper, lower;
+
+ for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++, bat++) {
+ if (read_bat(bat, &upper, &lower) != -1) {
+ if (!BATU_VALID(upper))
+ size = 0;
+ else
+ size = BATU_SIZE(upper);
+ addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
+ size, i);
+ }
+#ifdef CONFIG_HIGH_BATS
+ /* High bats are not contiguous with low BAT numbers */
+ if (bat == DBAT3)
+ bat = DBAT4 - 1;
+#endif
+ }
+}
+#endif
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ volatile ccsr_ddr_t *ddr;
+
+ switch (ctrl_num) {
+ case 0:
+ ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
+ break;
+ case 1:
+ ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
+ break;
+ default:
+ printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+ return;
+ }
+
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i == 0) {
+ out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+ } else if (i == 1) {
+ out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+ } else if (i == 2) {
+ out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+ } else if (i == 3) {
+ out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+ out_be32(&ddr->cs3_config, regs->cs[i].config);
+ }
+ }
+
+ out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+ out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+ out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+ out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl);
+ out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+ out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+ debug("before go\n");
+
+ /*
+ * 200 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ */
+ udelay(200);
+ asm volatile("sync;isync");
+
+ out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+ /*
+ * Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done
+ */
+ while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+ udelay(10000); /* throttle polling rate */
+ }
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/mp.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_fixup_num_cores(void *blob);
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_MP
+ int off;
+ u32 bootpg = determine_mp_bootpg();
+#endif
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+#if defined(CONFIG_MPC8641)
+ do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
+ "bus-frequency", gd->lbc_clk, 1);
+#endif
+ do_fixup_by_compat_u32(blob, "fsl,elbc",
+ "bus-frequency", gd->lbc_clk, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
+ || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob);
+#endif
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+#ifdef CONFIG_MP
+ /* Reserve the boot page so OSes dont use it */
+ off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
+ if (off < 0)
+ printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+#endif
+ ft_fixup_num_cores(blob);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2004, 2007 Freescale Semiconductor. (MPC86xx Port)
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc86xx.h>
+#include <command.h>
+#include <asm/processor.h>
+
+int interrupt_init_cpu(unsigned long *decrementer_count)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ccsr_pic_t *pic = &immr->im_pic;
+
+ pic->gcr = MPC86xx_PICGCR_RST;
+ while (pic->gcr & MPC86xx_PICGCR_RST)
+ ;
+ pic->gcr = MPC86xx_PICGCR_MODE;
+
+ *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+ debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
+ (get_tbclk() / 1000000),
+ *decrementer_count);
+
+#ifdef CONFIG_INTERRUPTS
+
+ pic->iivpr1 = 0x810001; /* 50220 enable mcm interrupts */
+ debug("iivpr1@%x = %x\n", &pic->iivpr1, pic->iivpr1);
+
+ pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
+ debug("iivpr2@%x = %x\n", &pic->iivpr2, pic->iivpr2);
+
+ pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
+ debug("iivpr3@%x = %x\n", &pic->iivpr3, pic->iivpr3);
+
+#if defined(CONFIG_PCI1) || defined(CONFIG_PCIE1)
+ pic->iivpr8 = 0x810008; /* enable pcie1 interrupts */
+ debug("iivpr8@%x = %x\n", &pic->iivpr8, pic->iivpr8);
+#endif
+#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
+ pic->iivpr9 = 0x810009; /* enable pcie2 interrupts */
+ debug("iivpr9@%x = %x\n", &pic->iivpr9, pic->iivpr9);
+#endif
+
+ pic->ctpr = 0; /* 40080 clear current task priority register */
+#endif
+
+ return 0;
+}
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* nothing to do here */
+}
+
+/*
+ * Install and free a interrupt handler. Not implemented yet.
+ */
+void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+}
+
+void irq_free_handler(int vec)
+{
+}
+
+/*
+ * irqinfo - print information about PCI devices,not implemented.
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ return 0;
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+ puts("external_interrupt (oops!)\n");
+}
--- /dev/null
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <ioports.h>
+#include <lmb.h>
+#include <asm/io.h>
+#include <asm/mp.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cpu_reset(int nr)
+{
+ /* dummy function so common/cmd_mp.c will build
+ * should be implemented in the future, when cpu_release()
+ * is supported. Be aware there may be a similiar bug
+ * as exists on MPC85xx w/its PIC having a timing window
+ * associated to resetting the core */
+ return 1;
+}
+
+int cpu_status(int nr)
+{
+ /* dummy function so common/cmd_mp.c will build */
+ return 0;
+}
+
+int cpu_disable(int nr)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+
+ switch (nr) {
+ case 0:
+ setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU0);
+ break;
+ case 1:
+ setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU1);
+ break;
+ default:
+ printf("Invalid cpu number for disable %d\n", nr);
+ return 1;
+ }
+
+ return 0;
+}
+
+int cpu_release(int nr, int argc, char *argv[])
+{
+ /* dummy function so common/cmd_mp.c will build
+ * should be implemented in the future */
+ return 1;
+}
+
+u32 determine_mp_bootpg(void)
+{
+ /* if we have 4G or more of memory, put the boot page at 4Gb-1M */
+ if ((u64)gd->ram_size > 0xfffff000)
+ return (0xfff00000);
+
+ return (gd->ram_size - (1024 * 1024));
+}
+
+void cpu_mp_lmb_reserve(struct lmb *lmb)
+{
+ u32 bootpg = determine_mp_bootpg();
+
+ /* tell u-boot we stole a page */
+ lmb_reserve(lmb, bootpg, 4096);
+}
+
+/*
+ * Copy the code for other cpus to execute into an
+ * aligned location accessible via BPTR
+ */
+void setup_mp(void)
+{
+ extern ulong __secondary_start_page;
+ ulong fixup = (ulong)&__secondary_start_page;
+ u32 bootpg = determine_mp_bootpg();
+ u32 bootpg_va;
+
+ if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
+ /* We're not covered by the DDR mapping, set up BAT */
+ write_bat(DBAT7, CONFIG_SYS_SCRATCH_VA | BATU_BL_128K |
+ BATU_VS | BATU_VP,
+ bootpg | BATL_PP_RW | BATL_MEMCOHERENCE);
+ bootpg_va = CONFIG_SYS_SCRATCH_VA;
+ } else {
+ bootpg_va = bootpg;
+ }
+
+ memcpy((void *)bootpg_va, (void *)fixup, 4096);
+ flush_cache(bootpg_va, 4096);
+
+ /* remove the temporary BAT mapping */
+ if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE)
+ write_bat(DBAT7, 0, 0);
+
+ /* If the physical location of bootpg is not at fff00000, set BPTR */
+ if (bootpg != 0xfff00000)
+ out_be32((uint *)(CONFIG_SYS_CCSRBAR + 0x20), 0x80000000 |
+ (bootpg >> 12));
+}
--- /dev/null
+/*
+ * Copyright 2004, 2007, 2008 Freescale Semiconductor.
+ * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* If this is a multi-cpu system then we need to handle the
+ * 2nd cpu. The assumption is that the 2nd cpu is being
+ * held in boot holdoff mode until the 1st cpu unlocks it
+ * from Linux. We'll do some basic cpu init and then pass
+ * it to the Linux Reset Vector.
+ * Sri: Much of this initialization is not required. Linux
+ * rewrites the bats, and the sprs and also enables the L1 cache.
+ *
+ * Core 0 must copy this to a 1M aligned region and set BPTR
+ * to point to it.
+ */
+ .align 12
+.globl __secondary_start_page
+__secondary_start_page:
+ .space 0x100 /* space over to reset vector loc */
+ mfspr r0, MSSCR0
+ andi. r0, r0, 0x0020
+ rlwinm r0,r0,27,31,31
+ mtspr PIR, r0
+
+ /* Invalidate BATs */
+ li r0, 0
+ mtspr IBAT0U, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT4U, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT7U, r0
+ isync
+ mtspr DBAT0U, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT4U, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT7U, r0
+ isync
+ sync
+
+ /* enable extended addressing */
+ mfspr r0, HID0
+ lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
+ ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
+ mtspr HID0, r0
+ sync
+ isync
+
+#ifdef CONFIG_SYS_L2
+ /* init the L2 cache */
+ addis r3, r0, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ sync
+ mtspr l2cr, r3
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
+ /* invalidate the L2 cache */
+ mfspr r3, l2cr
+ rlwinm. r3, r3, 0, 0, 0
+ beq 1f
+
+ mfspr r3, l2cr
+ rlwinm r3, r3, 0, 1, 31
+
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
+ sync
+ mtspr l2cr, r3
+ sync
+1: mfspr r3, l2cr
+ oris r3, r3, L2CR_L2I@h
+ mtspr l2cr, r3
+
+invl2:
+ mfspr r3, l2cr
+ andis. r3, r3, L2CR_L2I@h
+ bne invl2
+ sync
+#endif
+
+ /* enable and invalidate the data cache */
+ mfspr r3, HID0
+ li r5, HID0_DCFI|HID0_DLOCK
+ andc r3, r3, r5
+ mtspr HID0, r3 /* no invalidate, unlock */
+ ori r3, r3, HID0_DCE
+ ori r5, r3, HID0_DCFI
+ mtspr HID0, r5 /* enable + invalidate */
+ mtspr HID0, r3 /* enable */
+ sync
+#ifdef CONFIG_SYS_L2
+ sync
+ lis r3, L2_ENABLE@h
+ ori r3, r3, L2_ENABLE@l
+ mtspr l2cr, r3
+ isync
+ sync
+#endif
+
+ /* enable and invalidate the instruction cache*/
+ mfspr r3, HID0
+ li r5, HID0_ICFI|HID0_ILOCK
+ andc r3, r3, r5
+ ori r3, r3, HID0_ICE
+ ori r5, r3, HID0_ICFI
+ mtspr HID0, r5
+ mtspr HID0, r3
+ isync
+ sync
+
+ /* TBEN in HID0 */
+ mfspr r4, HID0
+ oris r4, r4, 0x0400
+ mtspr HID0, r4
+ sync
+ isync
+
+ /* MCP|SYNCBE|ABE in HID1 */
+ mfspr r4, HID1
+ oris r4, r4, 0x8000
+ ori r4, r4, 0x0C00
+ mtspr HID1, r4
+ sync
+ isync
+
+ lis r3, CONFIG_LINUX_RESET_VEC@h
+ ori r3, r3, CONFIG_LINUX_RESET_VEC@l
+ mtlr r3
+ blr
+
+ /* Never Returns, Running in Linux Now */
--- /dev/null
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc86xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+
+void get_sys_info(sys_info_t *sysInfo)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint plat_ratio, e600_ratio;
+ uint lcrr_div;
+
+ plat_ratio = (gur->porpllsr) & 0x0000003e;
+ plat_ratio >>= 1;
+
+ switch (plat_ratio) {
+ case 0x0:
+ sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
+ break;
+ case 0x02:
+ case 0x03:
+ case 0x04:
+ case 0x05:
+ case 0x06:
+ case 0x08:
+ case 0x09:
+ case 0x0a:
+ case 0x0c:
+ case 0x10:
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+ break;
+ default:
+ sysInfo->freqSystemBus = 0;
+ break;
+ }
+
+ e600_ratio = (gur->porpllsr) & 0x003f0000;
+ e600_ratio >>= 16;
+
+ switch (e600_ratio) {
+ case 0x10:
+ sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
+ break;
+ case 0x19:
+ sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
+ break;
+ case 0x20:
+ sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
+ break;
+ case 0x39:
+ sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
+ break;
+ case 0x28:
+ sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
+ break;
+ case 0x1d:
+ sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
+ break;
+ default:
+ sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
+ break;
+ }
+
+#if defined(CONFIG_SYS_LBC_LCRR)
+ /* We will program LCRR to this value later */
+ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
+#else
+ {
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
+ }
+#endif
+ if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
+ } else {
+ /* In case anyone cares what the unknown value is */
+ sysInfo->freqLocalBus = lcrr_div;
+ }
+}
+
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2)
+ * (Approx. GCLK frequency in Hz)
+ */
+
+int get_clocks(void)
+{
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+ gd->cpu_clk = sys_info.freqProcessor;
+ gd->bus_clk = sys_info.freqSystemBus;
+ gd->lbc_clk = sys_info.freqLocalBus;
+
+ /*
+ * The base clock for I2C depends on the actual SOC. Unfortunately,
+ * there is no pattern that can be used to determine the frequency, so
+ * the only choice is to look up the actual SOC number and use the value
+ * for that SOC. This information is taken from application note
+ * AN2919.
+ */
+#ifdef CONFIG_MPC8610
+ gd->i2c1_clk = sys_info.freqSystemBus;
+#else
+ gd->i2c1_clk = sys_info.freqSystemBus / 2;
+#endif
+ gd->i2c2_clk = gd->i2c1_clk;
+
+ if (gd->cpu_clk != 0)
+ return 0;
+ else
+ return 1;
+}
+
+
+/*
+ * get_bus_freq
+ * Return system bus freq in Hz
+ */
+
+ulong get_bus_freq(ulong dummy)
+{
+ ulong val;
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+ val = sys_info.freqSystemBus;
+
+ return val;
+}
--- /dev/null
+/*
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfff00100 and the code is executed
+ * from flash. The code is organized to be at an other address
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ */
+#include <config.h>
+#include <mpc86xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/*
+ * Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions
+ */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+ sync
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+ sync
+
+ /* the boot code is located below the exception table */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+ STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x2000
+
+boot_cold:
+boot_warm:
+ /*
+ * NOTE: Only Cpu 0 will ever come here. Other cores go to an
+ * address specified by the BPTR
+ */
+1:
+#ifdef CONFIG_SYS_RAMBOOT
+ /* disable everything */
+ li r0, 0
+ mtspr HID0, r0
+ sync
+ mtmsr 0
+#endif
+
+ /* Invalidate BATs */
+ bl invalidate_bats
+ sync
+ /* Invalidate all of TLB before MMU turn on */
+ bl clear_tlbs
+ sync
+
+#ifdef CONFIG_SYS_L2
+ /* init the L2 cache */
+ lis r3, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ mtspr l2cr, r3
+ /* invalidate the L2 cache */
+ bl l2cache_invalidate
+ sync
+#endif
+
+ /*
+ * Calculate absolute address in FLASH and jump there
+ *------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*------------------------------------------------------*/
+ /* perform low-level init */
+
+ /* enable extended addressing */
+ bl enable_ext_addr
+
+ /* setup the bats */
+ bl early_bats
+
+ /*
+ * Cache must be enabled here for stack-in-cache trick.
+ * This means we need to enable the BATS.
+ * Cache should be turned on after BATs, since by default
+ * everything is write-through.
+ */
+
+ /* enable address translation */
+ mfmsr r5
+ ori r5, r5, (MSR_IR | MSR_DR)
+ lis r3,addr_trans_enabled@h
+ ori r3, r3, addr_trans_enabled@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r5
+ rfi
+
+addr_trans_enabled:
+ /* enable and invalidate the data cache */
+/* bl l1dcache_enable */
+ bl dcache_enable
+ sync
+
+#if 1
+ bl icache_enable
+#endif
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+ bl lock_ram_in_cache
+ sync
+#endif
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ bl setup_ccsrbar
+#endif
+
+ /* set up the stack pointer in our newly created
+ * cache-ram (r1) */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ /* run low-level CPU init code (from Flash) */
+ bl cpu_init_f
+ sync
+
+#ifdef RUN_DIAG
+
+ /* Load PX_AUX register address in r4 */
+ lis r4, PIXIS_BASE@h
+ ori r4, r4, 0x6
+ /* Load contents of PX_AUX in r3 bits 24 to 31*/
+ lbz r3, 0(r4)
+
+ /* Mask and obtain the bit in r3 */
+ rlwinm. r3, r3, 0, 24, 24
+ /* If not zero, jump and continue with u-boot */
+ bne diag_done
+
+ /* Load back contents of PX_AUX in r3 bits 24 to 31 */
+ lbz r3, 0(r4)
+ /* Set the MSB of the register value */
+ ori r3, r3, 0x80
+ /* Write value in r3 back to PX_AUX */
+ stb r3, 0(r4)
+
+ /* Get the address to jump to in r3*/
+ lis r3, CONFIG_SYS_DIAG_ADDR@h
+ ori r3, r3, CONFIG_SYS_DIAG_ADDR@l
+
+ /* Load the LR with the branch address */
+ mtlr r3
+
+ /* Branch to diagnostic */
+ blr
+
+diag_done:
+#endif
+
+/* bl l2cache_enable */
+ mr r3, r21
+
+ /* r3: BOOTFLAG */
+ /* run 1st part of board init code (from Flash) */
+ bl board_init_f
+ sync
+
+ /* NOTREACHED */
+
+ .globl invalidate_bats
+invalidate_bats:
+
+ li r0, 0
+ /* invalidate BATs */
+ mtspr IBAT0U, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT4U, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT7U, r0
+
+ isync
+ mtspr DBAT0U, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT4U, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT7U, r0
+
+ isync
+ sync
+ blr
+
+/*
+ * early_bats:
+ *
+ * Set up bats needed early on - this is usually the BAT for the
+ * stack-in-cache, the Flash, and CCSR space
+ */
+ .globl early_bats
+early_bats:
+ /* IBAT 3 */
+ lis r4, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ lis r3, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+ isync
+
+ /* DBAT 3 */
+ lis r4, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ lis r3, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+ isync
+
+ /* IBAT 5 */
+ lis r4, CONFIG_SYS_IBAT5L@h
+ ori r4, r4, CONFIG_SYS_IBAT5L@l
+ lis r3, CONFIG_SYS_IBAT5U@h
+ ori r3, r3, CONFIG_SYS_IBAT5U@l
+ mtspr IBAT5L, r4
+ mtspr IBAT5U, r3
+ isync
+
+ /* DBAT 5 */
+ lis r4, CONFIG_SYS_DBAT5L@h
+ ori r4, r4, CONFIG_SYS_DBAT5L@l
+ lis r3, CONFIG_SYS_DBAT5U@h
+ ori r3, r3, CONFIG_SYS_DBAT5U@l
+ mtspr DBAT5L, r4
+ mtspr DBAT5U, r3
+ isync
+
+ /* IBAT 6 */
+ lis r4, CONFIG_SYS_IBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_IBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
+ mtspr IBAT6L, r4
+ mtspr IBAT6U, r3
+ isync
+
+ /* DBAT 6 */
+ lis r4, CONFIG_SYS_DBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_DBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
+ mtspr DBAT6L, r4
+ mtspr DBAT6U, r3
+ isync
+
+#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ /* IBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+ isync
+
+ /* DBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+ isync
+#endif
+ blr
+
+ .globl clear_tlbs
+clear_tlbs:
+ addis r3, 0, 0x0000
+ addis r5, 0, 0x4
+ isync
+tlblp:
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmp 0, 0, r3, r5
+ blt tlblp
+ blr
+
+ .globl disable_addr_trans
+disable_addr_trans:
+ /* disable address translation */
+ mflr r4
+ mfmsr r3
+ andi. r0, r3, (MSR_IR | MSR_DR)
+ beqlr
+ andc r3, r3, r0
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+ .globl dc_read
+dc_read:
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+ .globl get_svr
+get_svr:
+ mfspr r3, SVR
+ blr
+
+
+/*
+ * Function: in8
+ * Description: Input 8 bits
+ */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*
+ * Function: out8
+ * Description: Output 8 bits
+ */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out16
+ * Description: Output 16 bits
+ */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out16r
+ * Description: Byte reverse and output 16 bits
+ */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ blr
+
+/*
+ * Function: out32
+ * Description: Output 32 bits
+ */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out32r
+ * Description: Byte reverse and output 32 bits
+ */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ blr
+
+/*
+ * Function: in16
+ * Description: Input 16 bits
+ */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*
+ * Function: in16r
+ * Description: Input 16 bits and byte reverse
+ */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*
+ * Function: in32
+ * Description: Input 32 bits
+ */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/*
+ * Function: in32r
+ * Description: Input 32 bits and byte reverse
+ */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+/* clear_bss: */
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+ mr r3, r9 /* Init Date pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /* not reached - end relocate_code */
+/*-----------------------------------------------------------------------*/
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ /* enable execptions from RAM vectors */
+ mfmsr r7
+ li r8,MSR_IP
+ andc r7,r7,r8
+ ori r7,r7,MSR_ME /* Enable Machine Check */
+ mtmsr r7
+
+ mtlr r4 /* restore link register */
+ blr
+
+.globl enable_ext_addr
+enable_ext_addr:
+ mfspr r0, HID0
+ lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
+ ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
+ mtspr HID0, r0
+ sync
+ isync
+ blr
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+.globl setup_ccsrbar
+setup_ccsrbar:
+ /* Special sequence needed to update CCSRBAR itself */
+ lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
+ ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
+
+ lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ srwi r5,r5,12
+ li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ rlwimi r5,r6,20,8,11
+ stw r5, 0(r4) /* Store physical value of CCSR */
+ isync
+
+ lis r5, TEXT_BASE@h
+ ori r5,r5,TEXT_BASE@l
+ lwz r5, 0(r5)
+ isync
+
+ /* Use VA of CCSR to do read */
+ lis r3, CONFIG_SYS_CCSRBAR@h
+ lwz r5, CONFIG_SYS_CCSRBAR@l(r3)
+ isync
+
+ blr
+#endif
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+lock_ram_in_cache:
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1:
+ dcbz r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+#if 1
+/* Lock the data cache */
+ mfspr r0, HID0
+ ori r0, r0, 0x1000
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#if 0
+ /* Lock the first way of the data cache */
+ mfspr r0, LDSTCR
+ ori r0, r0, 0x0080
+#if defined(CONFIG_ALTIVEC)
+ dssall
+#endif
+ sync
+ mtspr LDSTCR, r0
+ sync
+ isync
+ blr
+#endif
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1: icbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+#if 1
+/* Unlock the data cache and invalidate it */
+ mfspr r0, HID0
+ li r3,0x1000
+ andc r0,r0,r3
+ li r3,0x0400
+ or r0,r0,r3
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#if 0
+ /* Unlock the first way of the data cache */
+ mfspr r0, LDSTCR
+ li r3,0x0080
+ andc r0,r0,r3
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
+ sync
+ mtspr LDSTCR, r0
+ sync
+ isync
+ li r3,0x0400
+ or r0,r0,r3
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#endif
--- /dev/null
+/*
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint) sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32)
+ break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void
+show_regs(struct pt_regs *regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
+ " %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP:"
+ " %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr & MSR_EE ? 1 : 0,
+ regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,
+ regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0,
+ regs->msr & MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ", regs);
+ switch ( regs->msr & 0x001F0000) {
+ case (0x80000000>>11):
+ printf("MSS error. MSSSR0: %08x\n", mfspr(SPRN_MSSSR0));
+ break;
+ case (0x80000000>>12):
+ printf("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000 >> 13):
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000 >> 14):
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000 >> 15):
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
+ int i, j;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs(regs);
+
+ p = (unsigned char *)((unsigned long)p & 0xFFFFFFE0);
+ p -= 32;
+ for (i = 0; i < 256; i += 16) {
+ printf("%08x: ", (unsigned int)p + i);
+ for (j = 0; j < 16; j++) {
+ printf("%02x ", p[i + j]);
+ }
+ printf("\n");
+ }
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+ return;
+#endif
+ printf("UnknownException regs@%lx\n", (ulong)regs);
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+/*
+ * Probe an address by reading.
+ * If not present, return -1,
+ * otherwise return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+ return 0;
+}
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# CFLAGS += -DET_DEBUG
+
+LIB = $(obj)lib$(CPU).a
+
+START-y += start.o
+START-y += kgdb.o
+COBJS-y += bedbug_860.o
+COBJS-y += commproc.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += fec.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-y += i2c.o
+COBJS-y += interrupts.o
+COBJS-y += lcd.o
+COBJS-y += scc.o
+COBJS-y += serial.o
+COBJS-y += speed.o
+COBJS-y += spi.o
+COBJS-y += traps.o
+COBJS-y += upatch.o
+COBJS-y += video.o
+SOBJS-y += plprcr_write.o
+
+SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START-y))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Bedbug Functions specific to the MPC860 chip
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/regs.h>
+#include <bedbug/ppc.h>
+#include <bedbug/type.h>
+
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
+
+#define MAX_BREAK_POINTS 2
+
+extern CPU_DEBUG_CTX bug_ctx;
+
+void bedbug860_init __P((void));
+void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*[]));
+void bedbug860_break_isr __P((struct pt_regs*));
+int bedbug860_find_empty __P((void));
+int bedbug860_set __P((int,unsigned long));
+int bedbug860_clear __P((int));
+
+\f
+/* ======================================================================
+ * Initialize the global bug_ctx structure for the MPC860. Clear all
+ * of the breakpoints.
+ * ====================================================================== */
+
+void bedbug860_init( void )
+{
+ int i;
+ /* -------------------------------------------------- */
+
+ bug_ctx.hw_debug_enabled = 0;
+ bug_ctx.stopped = 0;
+ bug_ctx.current_bp = 0;
+ bug_ctx.regs = NULL;
+
+ bug_ctx.do_break = bedbug860_do_break;
+ bug_ctx.break_isr = bedbug860_break_isr;
+ bug_ctx.find_empty = bedbug860_find_empty;
+ bug_ctx.set = bedbug860_set;
+ bug_ctx.clear = bedbug860_clear;
+
+ for( i = 1; i <= MAX_BREAK_POINTS; ++i )
+ (*bug_ctx.clear)( i );
+
+ puts ("BEDBUG:ready\n");
+ return;
+} /* bedbug_init_breakpoints */
+
+
+\f
+/* ======================================================================
+ * Set/clear/show one of the hardware breakpoints for the 860. The "off"
+ * string will disable a specific breakpoint. The "show" string will
+ * display the current breakpoints. Otherwise an address will set a
+ * breakpoint at that address. Setting a breakpoint uses the CPU-specific
+ * set routine which will assign a breakpoint number.
+ * ====================================================================== */
+
+void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
+ char *argv[])
+{
+ long addr = 0; /* Address to break at */
+ int which_bp; /* Breakpoint number */
+ /* -------------------------------------------------- */
+
+ if (argc < 2)
+ {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ /* Turn off a breakpoint */
+
+ if( strcmp( argv[ 1 ], "off" ) == 0 )
+ {
+ if( bug_ctx.hw_debug_enabled == 0 )
+ {
+ printf( "No breakpoints enabled\n" );
+ return;
+ }
+
+ which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
+
+ if( bug_ctx.clear )
+ (*bug_ctx.clear)( which_bp );
+
+ printf( "Breakpoint %d removed\n", which_bp );
+ return;
+ }
+
+ /* Show a list of breakpoints */
+
+ if( strcmp( argv[ 1 ], "show" ) == 0 )
+ {
+ for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
+ {
+
+ switch( which_bp )
+ {
+ case 1: addr = GET_CMPA(); break;
+ case 2: addr = GET_CMPB(); break;
+ case 3: addr = GET_CMPC(); break;
+ case 4: addr = GET_CMPD(); break;
+ }
+
+ printf( "Breakpoint [%d]: ", which_bp );
+ if( addr == 0 )
+ printf( "NOT SET\n" );
+ else
+ disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+ }
+ return;
+ }
+
+ /* Set a breakpoint at the address */
+
+ if( !isdigit( argv[ 1 ][ 0 ]))
+ {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
+
+ if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
+ {
+ printf( "Breakpoint [%d]: ", which_bp );
+ disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+ }
+
+ return;
+} /* bedbug860_do_break */
+
+
+\f
+/* ======================================================================
+ * Handle a breakpoint. First determine which breakpoint was hit by
+ * looking at the DeBug Status Register (DBSR), clear the breakpoint
+ * and enter a mini main loop. Stay in the loop until the stopped flag
+ * in the debug context is cleared.
+ * ====================================================================== */
+
+void bedbug860_break_isr( struct pt_regs *regs )
+{
+ unsigned long addr; /* Address stopped at */
+ unsigned long cause; /* Address stopped at */
+ /* -------------------------------------------------- */
+
+ cause = GET_ICR();
+
+ if( !(cause & 0x00000004)) {
+ printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
+ return;
+ }
+
+ addr = regs->nip;
+
+ if( addr == GET_CMPA() )
+ {
+ bug_ctx.current_bp = 1;
+ }
+ else if( addr == GET_CMPB() )
+ {
+ bug_ctx.current_bp = 2;
+ }
+ else if( addr == GET_CMPC() )
+ {
+ bug_ctx.current_bp = 3;
+ }
+ else if( addr == GET_CMPD() )
+ {
+ bug_ctx.current_bp = 4;
+ }
+
+ bedbug_main_loop( addr, regs );
+ return;
+} /* bedbug860_break_isr */
+
+
+\f
+/* ======================================================================
+ * Look through all of the hardware breakpoints available to see if one
+ * is unused.
+ * ====================================================================== */
+
+int bedbug860_find_empty( void )
+{
+ /* -------------------------------------------------- */
+
+ if( GET_CMPA() == 0 )
+ return 1;
+
+ if( GET_CMPB() == 0 )
+ return 2;
+
+ if( GET_CMPC() == 0 )
+ return 3;
+
+ if( GET_CMPD() == 0 )
+ return 4;
+
+ return 0;
+} /* bedbug860_find_empty */
+
+
+\f
+/* ======================================================================
+ * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
+ * number, otherwise reassign the given breakpoint. If hardware debugging
+ * is not enabled, then turn it on via the MSR and DBCR0. Set the break
+ * address in the appropriate IACx register and enable proper address
+ * beakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug860_set( int which_bp, unsigned long addr )
+{
+ /* -------------------------------------------------- */
+
+ /* Only look if which_bp == 0, else use which_bp */
+ if(( bug_ctx.find_empty ) && ( !which_bp ) &&
+ ( which_bp = (*bug_ctx.find_empty)()) == 0 )
+ {
+ printf( "All breakpoints in use\n" );
+ return 0;
+ }
+
+ if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
+ {
+ printf( "Invalid break point # %d\n", which_bp );
+ return 0;
+ }
+
+ if( ! bug_ctx.hw_debug_enabled )
+ {
+ bug_ctx.hw_debug_enabled = 1;
+ SET_DER( GET_DER() | 0x00000004 );
+ }
+
+ switch( which_bp )
+ {
+ case 1:
+ SET_CMPA( addr );
+ SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
+ break;
+
+ case 2:
+ SET_CMPB( addr );
+ SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
+ break;
+
+ case 3:
+ SET_CMPC( addr );
+ SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
+ break;
+
+ case 4:
+ SET_CMPD( addr );
+ SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
+ break;
+ }
+
+ return which_bp;
+} /* bedbug860_set */
+
+
+\f
+/* ======================================================================
+ * Disable a specific breakoint by setting the appropriate IACx register
+ * to zero and claring the instruction address breakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug860_clear( int which_bp )
+{
+ /* -------------------------------------------------- */
+
+ if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
+ {
+ printf( "Invalid break point # (%d)\n", which_bp );
+ return -1;
+ }
+
+ switch( which_bp )
+ {
+ case 1:
+ SET_CMPA( 0 );
+ SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
+ break;
+
+ case 2:
+ SET_CMPB( 0 );
+ SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
+ break;
+
+ case 3:
+ SET_CMPC( 0 );
+ SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
+ break;
+
+ case 4:
+ SET_CMPD( 0 );
+ SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
+ break;
+ }
+
+ return 0;
+} /* bedbug860_clear */
+
+
+/* ====================================================================== */
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+
+int dpram_init (void)
+{
+ /* Reclaim the DP memory for our use. */
+ gd->dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
+
+ return (0);
+}
+
+/* Allocate some memory from the dual ported ram. We may want to
+ * enforce alignment restrictions, but right now everyone is a good
+ * citizen.
+ */
+uint dpram_alloc (uint size)
+{
+ uint addr = gd->dp_alloc_base;
+
+ if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
+ return (CPM_DP_NOSPACE);
+
+ gd->dp_alloc_base += size;
+
+ return addr;
+}
+
+uint dpram_base (void)
+{
+ return gd->dp_alloc_base;
+}
+
+/* Allocate some memory from the dual ported ram. We may want to
+ * enforce alignment restrictions, but right now everyone is a good
+ * citizen.
+ */
+uint dpram_alloc_align (uint size, uint align)
+{
+ uint addr, mask = align - 1;
+
+ addr = (gd->dp_alloc_base + mask) & ~mask;
+
+ if ((addr + size) >= gd->dp_alloc_top)
+ return (CPM_DP_NOSPACE);
+
+ gd->dp_alloc_base = addr + size;
+
+ return addr;
+}
+
+uint dpram_base_align (uint align)
+{
+ uint mask = align - 1;
+
+ return (gd->dp_alloc_base + mask) & ~mask;
+}
+#endif /* CONFIG_SYS_ALLOC_DPRAM */
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+void post_word_store (ulong a)
+{
+ volatile void *save_addr =
+ ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
+
+ *(volatile ulong *) save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile void *save_addr =
+ ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
+
+ return *(volatile ulong *) save_addr;
+}
+
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
+ CPM_BOOTCOUNT_ADDR );
+
+ save_addr[0] = a;
+ save_addr[1] = BOOTCOUNT_MAGIC;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
+ CPM_BOOTCOUNT_ADDR );
+
+ if (save_addr[1] != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return save_addr[0];
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * m8xx.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <netdev.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static char *cpu_warning = "\n " \
+ "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
+
+#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
+ !defined(CONFIG_MPC862))
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ char *id_str =
+# if defined(CONFIG_MPC855)
+ "PC855";
+# elif defined(CONFIG_MPC860P)
+ "PC860P";
+# else
+ NULL;
+# endif
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 860 */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+ suf = "";
+
+ /*
+ * Some boards use sockets so different CPUs can be used.
+ * We have to check chip version in run time.
+ */
+ switch (k) {
+ case 0x00020001: pre = 'P'; break;
+ case 0x00030001: break;
+ case 0x00120003: suf = "A"; break;
+ case 0x00130003: suf = "A3"; break;
+
+ case 0x00200004: suf = "B"; break;
+
+ case 0x00300004: suf = "C"; break;
+ case 0x00310004: suf = "C1"; m = 1; break;
+
+ case 0x00200064: mid = "SR"; suf = "B"; break;
+ case 0x00300065: mid = "SR"; suf = "C"; break;
+ case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
+ case 0x05010000: suf = "D3"; m = 1; break;
+ case 0x05020000: suf = "D4"; m = 1; break;
+ /* this value is not documented anywhere */
+ case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+ /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+ case 0x08010004: /* Rev. A.0 */
+ suf = "A";
+ /* fall through */
+ case 0x08000003: /* Rev. 0.3 */
+ pre = 'M'; m = 1;
+ if (id_str == NULL)
+ id_str =
+# if defined(CONFIG_MPC852T)
+ "PC852T";
+# elif defined(CONFIG_MPC859T)
+ "PC859T";
+# elif defined(CONFIG_MPC859DSL)
+ "PC859DSL";
+# elif defined(CONFIG_MPC866T)
+ "PC866T";
+# else
+ "PC866x"; /* Unknown chip from MPC866 family */
+# endif
+ break;
+ case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
+ if (id_str == NULL)
+ id_str = "PC885"; /* 870/875/880/885 */
+ break;
+
+ default: suf = NULL; break;
+ }
+
+ if (id_str == NULL)
+ id_str = "PC86x"; /* Unknown 86x chip */
+ if (suf)
+ printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
+ else
+ printf ("unknown M%s (0x%08x)", id_str, k);
+
+
+#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
+ printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
+ strmhz (buf, clock),
+ CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
+ ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
+ CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
+ ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
+ );
+#else
+ printf (" at %s MHz: ", strmhz (buf, clock));
+#endif
+ printf ("%u kB I-Cache %u kB D-Cache",
+ checkicache () >> 10,
+ checkdcache () >> 10
+ );
+
+ /* do we have a FEC (860T/P or 852/859/866/885)? */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+#ifdef DEBUG
+ if(clock != measure_gclk()) {
+ printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
+ }
+#endif
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC862)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+
+ /* this value is not documented anywhere */
+ case 0x06000000: mid = "P"; suf = "0"; break;
+ case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
+ case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
+ default: suf = NULL; break;
+ }
+
+#ifndef CONFIG_MPC857
+ if (suf)
+ printf ("%cPC862%sZPnn%s", pre, mid, suf);
+ else
+ printf ("unknown MPC862 (0x%08x)", k);
+#else
+ if (suf)
+ printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
+ else
+ printf ("unknown MPC857 (0x%08x)", k);
+#endif
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 862T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC823)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+ /* MPC823 */
+ case 0x20000000: suf = "0"; break;
+ case 0x20010000: suf = "0.1"; break;
+ case 0x20020000: suf = "Z2/3"; break;
+ case 0x20020001: suf = "Z3"; break;
+ case 0x21000000: suf = "A"; break;
+ case 0x21010000: suf = "B"; m = 1; break;
+ case 0x21010001: suf = "B2"; m = 1; break;
+ /* MPC823E */
+ case 0x24010000: suf = NULL;
+ puts ("PPC823EZTnnB2");
+ m = 1;
+ break;
+ default:
+ suf = NULL;
+ printf ("unknown MPC823 (0x%08x)", k);
+ break;
+ }
+ if (suf)
+ printf ("PPC823ZTnn%s", suf);
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 860T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ puts (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC850)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+ case 0x20020001:
+ printf ("XPC850xxZT");
+ break;
+ case 0x21000065:
+ printf ("XPC850xxZTA");
+ break;
+ case 0x21010067:
+ printf ("XPC850xxZTB");
+ m = 1;
+ break;
+ case 0x21020068:
+ printf ("XPC850xxZTC");
+ m = 1;
+ break;
+ default:
+ printf ("unknown MPC850 (0x%08x)", k);
+ }
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 850T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+#else
+#error CPU undefined
+#endif
+/* ------------------------------------------------------------------------- */
+
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ uint pvr = get_pvr ();
+
+ puts ("CPU: ");
+
+ /* 850 has PARTNUM 20 */
+ /* 801 has PARTNUM 10 */
+ return check_CPU (clock, pvr, immr);
+}
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
+
+int checkicache (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_ic_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP86x
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+ wr_ic_cst (IDC_DISABLE);
+ __asm__ volatile ("isync");
+
+ while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
+ wr_ic_adr (k);
+ wr_ic_cst (IDC_LDLCK);
+ __asm__ volatile ("isync");
+
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_ic_cst (IDC_ENABLE);
+ else
+ wr_ic_cst (IDC_DISABLE);
+
+ __asm__ volatile ("isync");
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
+/* call with cache disabled */
+
+int checkdcache (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_dc_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP86x
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+ wr_dc_cst (IDC_DISABLE);
+
+ while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
+ wr_dc_adr (k);
+ wr_dc_cst (IDC_LDLCK);
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_dc_cst (IDC_ENABLE);
+ else
+ wr_dc_cst (IDC_DISABLE);
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+ uint i;
+ uint addr = 0;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ for (i = 0; i < size; i++) {
+ memctl->memc_mdr = table[i]; /* (16-15) */
+ memctl->memc_mcr = addr | upm; /* (16-16) */
+ addr++;
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifndef CONFIG_LWMON
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr, addr;
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ volatile ("mtspr 81, 0");
+ __asm__ volatile ("mfmsr %0":"=r" (msr));
+
+ msr &= ~0x1030;
+ __asm__ volatile ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
+ * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+}
+
+#else /* CONFIG_LWMON */
+
+/*
+ * On the LWMON board, the MCLR reset input of the PIC's on the board
+ * uses a 47K/1n RC combination which has a 47us time constant. The
+ * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
+ * and thus too short to reset the external hardware. So we use the
+ * watchdog to reset the board.
+ */
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ /* prevent triggering the watchdog */
+ disable_interrupts ();
+
+ /* make sure the watchdog is running */
+ reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+
+ /* wait for watchdog reset */
+ while (1) {};
+
+ /* NOTREACHED */
+ return 1;
+}
+
+#endif /* CONFIG_LWMON */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ * See sections 14.2 and 14.6 of the User's Manual
+ */
+unsigned long get_tbclk (void)
+{
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
+ ulong oscclk, factor, pll;
+
+ if (immap->im_clkrst.car_sccr & SCCR_TBS) {
+ return (gd->cpu_clk / 16);
+ }
+
+ pll = immap->im_clkrst.car_plprcr;
+
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+
+ /*
+ * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
+ * factor is calculated as follows:
+ *
+ * MFN
+ * MFI + -------
+ * MFD + 1
+ * factor = -----------------
+ * (PDF + 1) * 2^S
+ *
+ * For older chips, it's just MF field of PLPRCR plus one.
+ */
+ if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+ factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
+ (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
+ } else {
+ factor = PLPRCR_val(MF)+1;
+ }
+
+ oscclk = gd->cpu_clk / factor;
+
+ if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ return (oscclk / 4);
+ }
+ return (oscclk / 16);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
+
+void reset_8xx_watchdog (volatile immap_t * immr)
+{
+# if defined(CONFIG_LWMON)
+ /*
+ * The LWMON board uses a MAX6301 Watchdog
+ * with the trigger pin connected to port PA.7
+ *
+ * (The old board version used a MAX706TESA Watchdog, which
+ * had to be handled exactly the same.)
+ */
+# define WATCHDOG_BIT 0x0100
+ immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
+ immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
+ immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
+
+ immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
+# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+ /*
+ * The KUP4 boards uses a TPS3705 Watchdog
+ * with the trigger pin connected to port PA.5
+ */
+# define WATCHDOG_BIT 0x0400
+ immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
+ immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
+ immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
+
+ immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
+# else
+ /*
+ * All other boards use the MPC8xx Internal Watchdog
+ */
+ immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
+ immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
+# endif /* CONFIG_LWMON */
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
+ scc_initialize(bis);
+#endif
+#if defined(FEC_ENET)
+ fec_initialize(bis);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#include <mpc8xx.h>
+#include <commproc.h>
+
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+ defined(CONFIG_SYS_SMC_UCODE_PATCH)
+void cpm_load_patch (volatile immap_t * immr);
+#endif
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+#ifndef CONFIG_MBX
+ volatile memctl8xx_t *memctl = &immr->im_memctl;
+# ifdef CONFIG_SYS_PLPRCR
+ ulong mfmask;
+# endif
+#endif
+ ulong reg;
+
+ /* SYPCR - contains watchdog control (11-9) */
+
+ immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+ reset_8xx_watchdog (immr);
+#endif /* CONFIG_WATCHDOG */
+
+ /* SIUMCR - contains debug pin configuration (11-6) */
+#ifndef CONFIG_SVM_SC8xx
+ immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
+#else
+ immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
+#endif
+ /* initialize timebase status and control register (11-26) */
+ /* unlock TBSCRK */
+
+ immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+ immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
+
+ /* initialize the PIT (11-31) */
+
+ immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+ immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+ /* System integration timers. Don't change EBDF! (15-27) */
+
+ immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+ reg = immr->im_clkrst.car_sccr;
+ reg &= SCCR_MASK;
+ reg |= CONFIG_SYS_SCCR;
+ immr->im_clkrst.car_sccr = reg;
+
+ /* PLL (CPU clock) settings (15-30) */
+
+ immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+#ifndef CONFIG_MBX /* MBX board does things different */
+
+ /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+ * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+ * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
+ * field value.
+ *
+ * For newer (starting MPC866) chips PLPRCR layout is different.
+ */
+#ifdef CONFIG_SYS_PLPRCR
+ if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
+ mfmask = PLPRCR_MFACT_MSK;
+ else
+ mfmask = PLPRCR_MF_MSK;
+
+ if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
+ reg = CONFIG_SYS_PLPRCR; /* reset control bits */
+ else {
+ reg = immr->im_clkrst.car_plprcr;
+ reg &= mfmask; /* isolate MF-related fields */
+ reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
+ }
+ immr->im_clkrst.car_plprcr = reg;
+#endif
+
+ /*
+ * Memory Controller:
+ */
+
+ /* perform BR0 reset that MPC850 Rev. A can't guarantee */
+ reg = memctl->memc_br0;
+ reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
+ reg |= BR_V; /* then add just the "Bank Valid" bit */
+ memctl->memc_br0 = reg;
+
+ /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+ * preliminary addresses - these have to be modified later
+ * when FLASH size has been determined
+ *
+ * Depending on the size of the memory region defined by
+ * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
+ * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
+ * map CONFIG_SYS_MONITOR_BASE.
+ *
+ * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
+ * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
+ *
+ * If BR0 wasn't loaded with address base 0xff000000, then BR0's
+ * base address remains as 0x00000000. However, the address mask
+ * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
+ * into the Bank0.
+ *
+ * This is why CONFIG_IVMS8 and similar boards must load BR0 with
+ * CONFIG_SYS_BR0_PRELIM in advance.
+ *
+ * [Thanks to Michael Liao for this explanation.
+ * I owe him a free beer. - wd]
+ */
+
+#if defined(CONFIG_GTH) || \
+ defined(CONFIG_HERMES) || \
+ defined(CONFIG_ICU862) || \
+ defined(CONFIG_IP860) || \
+ defined(CONFIG_IVML24) || \
+ defined(CONFIG_IVMS8) || \
+ defined(CONFIG_LWMON) || \
+ defined(CONFIG_MHPC) || \
+ defined(CONFIG_PCU_E) || \
+ defined(CONFIG_R360MPI) || \
+ defined(CONFIG_RMU) || \
+ defined(CONFIG_RPXCLASSIC) || \
+ defined(CONFIG_RPXLITE) || \
+ defined(CONFIG_SPC1920) || \
+ defined(CONFIG_SPD823TS)
+
+ memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR0_REMAP)
+ memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+ memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR5_REMAP)
+ memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
+#endif
+
+ /* now restrict to preliminary range */
+ memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+ memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
+ memctl->memc_br0 = 0;
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+ memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+ memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+ memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+ memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
+ memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+ memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
+ memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
+#endif
+
+#endif /* ! CONFIG_MBX */
+
+ /*
+ * Reset CPM
+ */
+ immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+#ifdef CONFIG_MBX
+ /*
+ * on the MBX, things are a little bit different:
+ * - we need to read the VPD to get board information
+ * - the plprcr is set up dynamically
+ * - the memory controller is set up dynamically
+ */
+ mbx_init ();
+#endif /* CONFIG_MBX */
+
+#ifdef CONFIG_RPXCLASSIC
+ rpxclassic_init ();
+#endif
+
+#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
+ rpxlite_init ();
+#endif
+
+#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
+ /* write config value */
+ immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
+#endif
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+ defined(CONFIG_SYS_SMC_UCODE_PATCH)
+ cpm_load_patch (immr); /* load mpc8xx microcode patch */
+#endif
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
+ bd_t *bd = gd->bd;
+ volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
+#endif
+
+#ifdef CONFIG_SYS_RTCSC
+ /* Unlock RTSC register */
+ immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
+ /* write config value */
+ immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
+#endif
+
+#ifdef CONFIG_SYS_RMDS
+ /* write config value */
+ immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
+#endif
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright 2008 (C) Bryan O'Donoghue
+ *
+ * Code copied & edited from Freescale mpc85xx stuff.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", get_tbclk(), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
+ gd->brg_clk, 1);
+
+ /* Fixup ethernet MAC addresses */
+ fdt_fixup_ethernet(blob);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <commproc.h>
+#include <net.h>
+#include <command.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#undef ET_DEBUG
+
+#if defined(CONFIG_CMD_NET) && \
+ (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
+
+/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
+#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
+#define CONFIG_ETHER_ON_FEC1 1
+#endif
+
+/* define WANT_MII when MII support is required */
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
+#define WANT_MII
+#else
+#undef WANT_MII
+#endif
+
+#if defined(WANT_MII)
+#include <miiphy.h>
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#endif
+
+#if defined(CONFIG_RMII) && !defined(WANT_MII)
+#error RMII support is unusable without a working PHY.
+#endif
+
+#ifdef CONFIG_SYS_DISCOVER_PHY
+static int mii_discover_phy(struct eth_device *dev);
+#endif
+
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value);
+int fec8xx_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value);
+
+static struct ether_fcc_info_s
+{
+ int ether_index;
+ int fecp_offset;
+ int phy_addr;
+ int actual_phy_addr;
+ int initialized;
+}
+ ether_fcc_info[] = {
+#if defined(CONFIG_ETHER_ON_FEC1)
+ {
+ 0,
+ offsetof(immap_t, im_cpm.cp_fec1),
+#if defined(CONFIG_FEC1_PHY)
+ CONFIG_FEC1_PHY,
+#else
+ -1, /* discover */
+#endif
+ -1,
+ 0,
+
+ },
+#endif
+#if defined(CONFIG_ETHER_ON_FEC2)
+ {
+ 1,
+ offsetof(immap_t, im_cpm.cp_fec2),
+#if defined(CONFIG_FEC2_PHY)
+ CONFIG_FEC2_PHY,
+#else
+ -1,
+#endif
+ -1,
+ 0,
+ },
+#endif
+};
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+#ifdef __GNUC__
+static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
+#else
+#error txbuf must be aligned.
+#endif
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx = NULL;
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length);
+static int fec_recv(struct eth_device* dev);
+static int fec_init(struct eth_device* dev, bd_t * bd);
+static void fec_halt(struct eth_device* dev);
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+static void __mii_init(void);
+#endif
+
+int fec_initialize(bd_t *bis)
+{
+ struct eth_device* dev;
+ struct ether_fcc_info_s *efis;
+ int i;
+
+ for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) {
+
+ dev = malloc(sizeof(*dev));
+ if (dev == NULL)
+ hang();
+
+ memset(dev, 0, sizeof(*dev));
+
+ /* for FEC1 make sure that the name of the interface is the same
+ as the old one for compatibility reasons */
+ if (i == 0) {
+ sprintf (dev->name, "FEC ETHERNET");
+ } else {
+ sprintf (dev->name, "FEC%d ETHERNET",
+ ether_fcc_info[i].ether_index + 1);
+ }
+
+ efis = ðer_fcc_info[i];
+
+ /*
+ * reset actual phy addr
+ */
+ efis->actual_phy_addr = -1;
+
+ dev->priv = efis;
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name,
+ fec8xx_miiphy_read, fec8xx_miiphy_write);
+#endif
+ }
+ return 1;
+}
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int j, rc;
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j>=TOUT_LOOP) {
+ printf("TX not ready\n");
+ }
+
+ rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
+ __asm__ ("eieio");
+
+ /* Activate transmit Buffer Descriptor polling */
+ fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
+
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+#if defined(CONFIG_ICU862)
+ udelay(10);
+#else
+ udelay(1);
+#endif
+ j++;
+ }
+ if (j>=TOUT_LOOP) {
+ printf("TX timeout\n");
+ }
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
+ __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
+ (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
+#endif
+ /* return only status bits */;
+ rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+ return rc;
+}
+
+static int fec_recv (struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile fec_t *fecp =
+ (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
+ int length;
+
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+ printf ("%s[%d] err: %x\n",
+ __FUNCTION__, __LINE__,
+ rtx->rxbd[rxIdx].cbd_sc);
+#endif
+ } else {
+ volatile uchar *rx = NetRxPackets[rxIdx];
+
+ length -= 4;
+
+#if defined(CONFIG_CMD_CDP)
+ if ((rx[0] & 1) != 0
+ && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
+ && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
+ rx = NULL;
+#endif
+ /*
+ * Pass the packet up to the protocol layers.
+ */
+ if (rx != NULL)
+ NetReceive (rx, length);
+ }
+
+ /* Give the buffer back to the FEC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+ __asm__ ("eieio");
+
+ /* Try to fill Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+ }
+
+ return length;
+}
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+#define FEC_RESET_DELAY 50
+
+#if defined(CONFIG_RMII)
+
+static inline void fec_10Mbps(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ int fecidx = efis->ether_index;
+ uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
+
+ if ((unsigned int)fecidx >= 2)
+ hang();
+
+ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask;
+}
+
+static inline void fec_100Mbps(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ int fecidx = efis->ether_index;
+ uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
+
+ if ((unsigned int)fecidx >= 2)
+ hang();
+
+ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
+}
+
+#endif
+
+static inline void fec_full_duplex(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
+}
+
+static inline void fec_half_duplex(struct eth_device *dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+
+ fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
+}
+
+static void fec_pin_init(int fecidx)
+{
+ bd_t *bd = gd->bd;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile fec_t *fecp;
+
+ /*
+ * only two FECs please
+ */
+ if ((unsigned int)fecidx >= 2)
+ hang();
+
+ if (fecidx == 0)
+ fecp = &immr->im_cpm.cp_fec1;
+ else
+ fecp = &immr->im_cpm.cp_fec2;
+
+ /*
+ * Set MII speed to 2.5 MHz or slightly below.
+ * * According to the MPC860T (Rev. D) Fast ethernet controller user
+ * * manual (6.2.14),
+ * * the MII management interface clock must be less than or equal
+ * * to 2.5 MHz.
+ * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+ * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
+ *
+ * All MII configuration is done via FEC1 registers:
+ */
+ immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
+
+#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
+ /* our PHYs are the limit at 2.5 MHz */
+ fecp->fec_mii_speed <<= 1;
+#endif
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
+ /* use MDC for MII */
+ immr->im_ioport.iop_pdpar |= 0x0080;
+ immr->im_ioport.iop_pddir &= ~0x0080;
+#endif
+
+ if (fecidx == 0) {
+#if defined(CONFIG_ETHER_ON_FEC1)
+
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
+
+#if !defined(CONFIG_RMII)
+
+ immr->im_ioport.iop_papar |= 0xf830;
+ immr->im_ioport.iop_padir |= 0x0830;
+ immr->im_ioport.iop_padir &= ~0xf000;
+
+ immr->im_cpm.cp_pbpar |= 0x00001001;
+ immr->im_cpm.cp_pbdir &= ~0x00001001;
+
+ immr->im_ioport.iop_pcpar |= 0x000c;
+ immr->im_ioport.iop_pcdir &= ~0x000c;
+
+ immr->im_cpm.cp_pepar |= 0x00000003;
+ immr->im_cpm.cp_pedir |= 0x00000003;
+ immr->im_cpm.cp_peso &= ~0x00000003;
+
+ immr->im_cpm.cp_cptr &= ~0x00000100;
+
+#else
+
+#if !defined(CONFIG_FEC1_PHY_NORXERR)
+ immr->im_ioport.iop_papar |= 0x1000;
+ immr->im_ioport.iop_padir &= ~0x1000;
+#endif
+ immr->im_ioport.iop_papar |= 0xe810;
+ immr->im_ioport.iop_padir |= 0x0810;
+ immr->im_ioport.iop_padir &= ~0xe000;
+
+ immr->im_cpm.cp_pbpar |= 0x00000001;
+ immr->im_cpm.cp_pbdir &= ~0x00000001;
+
+ immr->im_cpm.cp_cptr |= 0x00000100;
+ immr->im_cpm.cp_cptr &= ~0x00000050;
+
+#endif /* !CONFIG_RMII */
+
+#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+ /*
+ * Configure all of port D for MII.
+ */
+ immr->im_ioport.iop_pdpar = 0x1fff;
+
+ /*
+ * Bits moved from Rev. D onward
+ */
+ if ((get_immr(0) & 0xffff) < 0x0501)
+ immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
+ else
+ immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
+#else
+ /*
+ * Configure port A for MII.
+ */
+
+#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
+
+ /*
+ * On the ICU862 board the MII-MDC pin is routed to PD8 pin
+ * * of CPU, so for this board we need to configure Utopia and
+ * * enable PD8 to MII-MDC function
+ */
+ immr->im_ioport.iop_pdpar |= 0x4080;
+#endif
+
+ /*
+ * Has Utopia been configured?
+ */
+ if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
+ /*
+ * YES - Use MUXED mode for UTOPIA bus.
+ * This frees Port A for use by MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode &= ~0x80;
+ } else {
+ /*
+ * NO - set SPLIT mode for UTOPIA bus.
+ *
+ * This doesn't really effect UTOPIA (which isn't
+ * enabled anyway) but just tells the 862
+ * to use port A for MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode |= 0x80;
+ }
+#endif /* !defined(CONFIG_ICU862) */
+
+#endif /* CONFIG_ETHER_ON_FEC1 */
+ } else if (fecidx == 1) {
+
+#if defined(CONFIG_ETHER_ON_FEC2)
+
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
+
+#if !defined(CONFIG_RMII)
+ immr->im_cpm.cp_pepar |= 0x0003fffc;
+ immr->im_cpm.cp_pedir |= 0x0003fffc;
+ immr->im_cpm.cp_peso &= ~0x000087fc;
+ immr->im_cpm.cp_peso |= 0x00037800;
+
+ immr->im_cpm.cp_cptr &= ~0x00000080;
+#else
+
+#if !defined(CONFIG_FEC2_PHY_NORXERR)
+ immr->im_cpm.cp_pepar |= 0x00000010;
+ immr->im_cpm.cp_pedir |= 0x00000010;
+ immr->im_cpm.cp_peso &= ~0x00000010;
+#endif
+ immr->im_cpm.cp_pepar |= 0x00039620;
+ immr->im_cpm.cp_pedir |= 0x00039620;
+ immr->im_cpm.cp_peso |= 0x00031000;
+ immr->im_cpm.cp_peso &= ~0x00008620;
+
+ immr->im_cpm.cp_cptr |= 0x00000080;
+ immr->im_cpm.cp_cptr &= ~0x00000028;
+#endif /* CONFIG_RMII */
+
+#endif /* CONFIG_MPC885_FAMILY */
+
+#endif /* CONFIG_ETHER_ON_FEC2 */
+
+ }
+}
+
+static int fec_reset(volatile fec_t *fecp)
+{
+ int i;
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY)
+ return -1;
+
+ return 0;
+}
+
+static int fec_init (struct eth_device *dev, bd_t * bd)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile fec_t *fecp =
+ (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
+ int i;
+
+ if (efis->ether_index == 0) {
+#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
+#if defined(CONFIG_MPC885ADS)
+ *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
+#else
+ /* configure FADS for fast (FEC) ethernet, half-duplex */
+ /* The LXT970 needs about 50ms to recover from reset, so
+ * wait for it by discovering the PHY before leaving eth_init().
+ */
+ {
+ volatile uint *bcsr4 = (volatile uint *) BCSR4;
+
+ *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
+ | (BCSR4_FETHCFG0 | BCSR4_FETHFDE |
+ BCSR4_FETHRST);
+
+ /* reset the LXT970 PHY */
+ *bcsr4 &= ~BCSR4_FETHRST;
+ udelay (10);
+ *bcsr4 |= BCSR4_FETHRST;
+ udelay (10);
+ }
+#endif /* CONFIG_MPC885ADS */
+#endif /* CONFIG_FADS */
+ }
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ /* the MII interface is connected to FEC1
+ * so for the miiphy_xxx function to work we must
+ * call mii_init since fec_halt messes the thing up
+ */
+ if (efis->ether_index != 0)
+ __mii_init();
+#endif
+
+ if (fec_reset(fecp) < 0)
+ printf ("FEC_RESET_DELAY timeout\n");
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt
+ */
+ fecp->fec_ievent = 0xffc0;
+
+ /* No need to set the IVEC register */
+
+ /* Set station address
+ */
+#define ea dev->enetaddr
+ fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
+ fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
+#undef ea
+
+#if defined(CONFIG_CMD_CDP)
+ /*
+ * Turn on multicast address hash table
+ */
+ fecp->fec_hash_table_high = 0xffffffff;
+ fecp->fec_hash_table_low = 0xffffffff;
+#else
+ /* Clear multicast address hash table
+ */
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
+
+ /* Set maximum receive buffer size.
+ */
+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+
+ /* Set maximum frame length
+ */
+ fecp->fec_r_hash = PKT_MAXBUF_SIZE;
+
+ /*
+ * Setup Buffers and Buffer Desriptors
+ */
+ rxIdx = 0;
+ txIdx = 0;
+
+ if (!rtx) {
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+ dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
+#endif
+ }
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Last, Tx CRC
+ */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* Set receive and transmit descriptor base
+ */
+ fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
+ fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
+
+ /* Enable MII mode
+ */
+#if 0 /* Full duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
+ fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
+#else /* Half duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl = 0;
+#endif
+
+ /* Enable big endian and don't care about SDMA FC.
+ */
+ fecp->fec_fun_code = 0x78000000;
+
+ /*
+ * Setup the pin configuration of the FEC
+ */
+ fec_pin_init (efis->ether_index);
+
+ rxIdx = 0;
+ txIdx = 0;
+
+ /*
+ * Now enable the transmit and receive processing
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+
+ if (efis->phy_addr == -1) {
+#ifdef CONFIG_SYS_DISCOVER_PHY
+ /*
+ * wait for the PHY to wake up after reset
+ */
+ efis->actual_phy_addr = mii_discover_phy (dev);
+
+ if (efis->actual_phy_addr == -1) {
+ printf ("Unable to discover phy!\n");
+ return -1;
+ }
+#else
+ efis->actual_phy_addr = -1;
+#endif
+ } else {
+ efis->actual_phy_addr = efis->phy_addr;
+ }
+
+#if defined(CONFIG_MII) && defined(CONFIG_RMII)
+ /*
+ * adapt the RMII speed to the speed of the phy
+ */
+ if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
+ fec_100Mbps (dev);
+ } else {
+ fec_10Mbps (dev);
+ }
+#endif
+
+#if defined(CONFIG_MII)
+ /*
+ * adapt to the half/full speed settings
+ */
+ if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
+ fec_full_duplex (dev);
+ } else {
+ fec_half_duplex (dev);
+ }
+#endif
+
+ /* And last, try to fill Rx Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+
+ efis->initialized = 1;
+
+ return 0;
+}
+
+
+static void fec_halt(struct eth_device* dev)
+{
+ struct ether_fcc_info_s *efis = dev->priv;
+ volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
+ int i;
+
+ /* avoid halt if initialized; mii gets stuck otherwise */
+ if (!efis->initialized)
+ return;
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf ("FEC_RESET_DELAY timeout\n");
+ return;
+ }
+
+ efis->initialized = 0;
+}
+
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+
+/* Make MII read/write commands for the FEC.
+*/
+
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
+
+/* PHY identification
+ */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
+#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
+
+/* send command to phy using mii, wait for result */
+static uint
+mii_send(uint mii_cmd)
+{
+ uint mii_reply;
+ volatile fec_t *ep;
+ int cnt;
+
+ ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
+
+ ep->fec_mii_data = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ cnt = 0;
+ while (!(ep->fec_ievent & FEC_ENET_MII)) {
+ if (++cnt > 1000) {
+ printf("mii_send STUCK!\n");
+ break;
+ }
+ }
+ mii_reply = ep->fec_mii_data; /* result from phy */
+ ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
+#if 0
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
+#endif
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif
+
+#if defined(CONFIG_SYS_DISCOVER_PHY)
+static int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ uint phyno;
+ int pass;
+ uint phytype;
+ int phyaddr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type ", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype |= mii_send(mk_mii_read(phyno,
+ PHY_PHYIDR1)) << 16;
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ",phyno,pass);
+ switch (phytype & 0xfffffff0) {
+ case PHY_ID_LXT970:
+ printf("LXT970\n");
+ break;
+ case PHY_ID_LXT971:
+ printf("LXT971\n");
+ break;
+ case PHY_ID_82555:
+ printf("82555\n");
+ break;
+ case PHY_ID_QS6612:
+ printf("QS6612\n");
+ break;
+ case PHY_ID_AMD79C784:
+ printf("AMD79C784\n");
+ break;
+ case PHY_ID_LSI80225B:
+ printf("LSI L80225/B\n");
+ break;
+ case PHY_ID_DM9161:
+ printf("Davicom DM9161\n");
+ break;
+ case PHY_ID_KSM8995M:
+ printf("MICREL KS8995M\n");
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0) {
+ printf("No PHY device found.\n");
+ }
+ return phyaddr;
+}
+#endif /* CONFIG_SYS_DISCOVER_PHY */
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
+
+/****************************************************************************
+ * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+static void __mii_init(void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+ if (fec_reset(fecp) < 0)
+ printf ("FEC_RESET_DELAY timeout\n");
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt
+ */
+ fecp->fec_ievent = 0xffc0;
+
+ /* Now enable the transmit and receive processing
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+}
+
+void mii_init (void)
+{
+ int i;
+
+ __mii_init();
+
+ /* Setup the pin configuration of the FEC(s)
+ */
+ for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
+ fec_pin_init(ether_fcc_info[i].ether_index);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", *value);
+#endif
+ return 0;
+}
+
+int fec8xx_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ short rdreg; /* register working value */
+#ifdef MII_DEBUG
+ printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", value);
+#endif
+ return 0;
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _FEC_H_
+#define _FEC_H_
+
+
+#endif /* _FEC_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#include <commproc.h>
+#include <i2c.h>
+#ifdef CONFIG_LWMON
+#include <watchdog.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* define to enable debug messages */
+#undef DEBUG_I2C
+
+/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
+#define TOUT_LOOP 1000000
+
+#define NUM_RX_BDS 4
+#define NUM_TX_BDS 4
+#define MAX_TX_SPACE 256
+#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
+
+typedef struct I2C_BD
+{
+ unsigned short status;
+ unsigned short length;
+ unsigned char *addr;
+} I2C_BD;
+#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
+
+#define BD_I2C_TX_CL 0x0001 /* collision error */
+#define BD_I2C_TX_UN 0x0002 /* underflow error */
+#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
+#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
+
+#define BD_I2C_RX_ERR BD_SC_OV
+
+typedef void (*i2c_ecb_t)(int, int); /* error callback function */
+
+/* This structure keeps track of the bd and buffer space usage. */
+typedef struct i2c_state {
+ int rx_idx; /* index to next free Rx BD */
+ int tx_idx; /* index to next free Tx BD */
+ void *rxbd; /* pointer to next free Rx BD */
+ void *txbd; /* pointer to next free Tx BD */
+ int tx_space; /* number of Tx bytes left */
+ unsigned char *tx_buf; /* pointer to free Tx area */
+ i2c_ecb_t err_cb; /* error callback function */
+} i2c_state_t;
+
+
+/* flags for i2c_send() and i2c_receive() */
+#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
+#define I2CF_START_COND 0x02 /* tx: generate start condition */
+#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
+
+/* return codes */
+#define I2CERR_NO_BUFFERS 0x01 /* no more BDs or buffer space */
+#define I2CERR_MSG_TOO_LONG 0x02 /* tried to send/receive to much data */
+#define I2CERR_TIMEOUT 0x03 /* timeout in i2c_doio() */
+#define I2CERR_QUEUE_EMPTY 0x04 /* i2c_doio called without send/receive */
+
+/* error callback flags */
+#define I2CECB_RX_ERR 0x10 /* this is a receive error */
+#define I2CECB_RX_ERR_OV 0x02 /* receive overrun error */
+#define I2CECB_RX_MASK 0x0f /* mask for error bits */
+#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
+#define I2CECB_TX_CL 0x01 /* transmit collision error */
+#define I2CECB_TX_UN 0x02 /* transmit underflow error */
+#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
+#define I2CECB_TX_MASK 0x0f /* mask for error bits */
+#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
+
+#ifdef DEBUG_I2C
+#define PRINTD(x) printf x
+#else
+#define PRINTD(x)
+#endif
+
+/*
+ * Returns the best value of I2BRG to meet desired clock speed of I2C with
+ * input parameters (clock speed, filter, and predivider value).
+ * It returns computer speed value and the difference between it and desired
+ * speed.
+ */
+static inline int
+i2c_roundrate(int hz, int speed, int filter, int modval,
+ int *brgval, int *totspeed)
+{
+ int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
+
+ PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
+ hz, speed, filter, modval));
+
+ div = moddiv * speed;
+ brgdiv = (hz + div - 1) / div;
+
+ PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
+
+ *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
+
+ if ((*brgval < 0) || (*brgval > 255)) {
+ PRINTD(("\t\trejected brgval=%d\n", *brgval));
+ return -1;
+ }
+
+ brgdiv = 2 * (*brgval + 3 + (2 * filter));
+ div = moddiv * brgdiv ;
+ *totspeed = hz / div;
+
+ PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
+
+ return 0;
+}
+
+/*
+ * Sets the I2C clock predivider and divider to meet required clock speed.
+ */
+static int
+i2c_setrate (int hz, int speed)
+{
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
+ int brgval,
+ modval, /* 0-3 */
+ bestspeed_diff = speed,
+ bestspeed_brgval = 0,
+ bestspeed_modval = 0,
+ bestspeed_filter = 0,
+ totspeed,
+ filter = 0; /* Use this fixed value */
+
+ for (modval = 0; modval < 4; modval++) {
+ if (i2c_roundrate(hz,speed,filter,modval,&brgval,&totspeed) == 0) {
+ int diff = speed - totspeed;
+
+ if ((diff >= 0) && (diff < bestspeed_diff)) {
+ bestspeed_diff = diff;
+ bestspeed_modval = modval;
+ bestspeed_brgval = brgval;
+ bestspeed_filter = filter;
+ }
+ }
+ }
+
+ PRINTD (("[I2C] Best is:\n"));
+ PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
+ hz,
+ speed,
+ bestspeed_filter,
+ bestspeed_modval,
+ bestspeed_brgval,
+ bestspeed_diff));
+
+ i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
+ i2c->i2c_i2brg = bestspeed_brgval & 0xff;
+
+ PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
+ i2c->i2c_i2brg));
+
+ return 1;
+}
+
+void
+i2c_init(int speed, int slaveaddr)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+ volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
+ volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+ ulong rbase, tbase;
+ volatile I2C_BD *rxbd, *txbd;
+ uint dpaddr;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
+ iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#else
+ /* Disable relocation */
+ iip->iic_rpbase = 0;
+#endif
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ dpaddr = iip->iic_rbase;
+ if (dpaddr == 0) {
+ /* need to allocate dual port ram */
+ dpaddr = dpram_alloc_align(
+ (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
+ MAX_TX_SPACE, 8);
+ }
+#else
+ dpaddr = CPM_I2C_BASE;
+#endif
+
+ /*
+ * initialise data in dual port ram:
+ *
+ * dpaddr->rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
+ * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
+ * tx buffer (MAX_TX_SPACE bytes)
+ */
+
+ rbase = dpaddr;
+ tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
+
+ /* Initialize Port B I2C pins. */
+ cp->cp_pbpar |= 0x00000030;
+ cp->cp_pbdir |= 0x00000030;
+ cp->cp_pbodr |= 0x00000030;
+
+ /* Disable interrupts */
+ i2c->i2c_i2mod = 0x00;
+ i2c->i2c_i2cmr = 0x00;
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2add = slaveaddr;
+
+ /*
+ * Set the I2C BRG Clock division factor from desired i2c rate
+ * and current CPU rate (we assume sccr dfbgr field is 0;
+ * divide BRGCLK by 1)
+ */
+ PRINTD(("[I2C] Setting rate...\n"));
+ i2c_setrate (gd->cpu_clk, CONFIG_SYS_I2C_SPEED) ;
+
+ /* Set I2C controller in master mode */
+ i2c->i2c_i2com = 0x01;
+
+ /* Set SDMA bus arbitration level to 5 (SDCR) */
+ immap->im_siu_conf.sc_sdcr = 0x0001 ;
+
+ /* Initialize Tx/Rx parameters */
+ iip->iic_rbase = rbase;
+ iip->iic_tbase = tbase;
+ rxbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_rbase]);
+ txbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_tbase]);
+
+ PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
+ PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
+ PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ /* Set big endian byte order */
+ iip->iic_tfcr = 0x10;
+ iip->iic_rfcr = 0x10;
+
+ /* Set maximum receive size. */
+ iip->iic_mrblr = I2C_RXTX_LEN;
+
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
+ /*
+ * Initialize required parameters if using microcode patch.
+ */
+ iip->iic_rbptr = iip->iic_rbase;
+ iip->iic_tbptr = iip->iic_tbase;
+ iip->iic_rstate = 0;
+ iip->iic_tstate = 0;
+#else
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ do {
+ __asm__ __volatile__ ("eieio");
+ } while (cp->cp_cpcr & CPM_CR_FLG);
+#endif
+
+ /* Clear events and interrupts */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2cmr = 0x00;
+}
+
+static void
+i2c_newio(i2c_state_t *state)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+ volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+
+ PRINTD(("[I2C] i2c_newio\n"));
+
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
+ iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+ state->rx_idx = 0;
+ state->tx_idx = 0;
+ state->rxbd = (void*)&cp->cp_dpmem[iip->iic_rbase];
+ state->txbd = (void*)&cp->cp_dpmem[iip->iic_tbase];
+ state->tx_space = MAX_TX_SPACE;
+ state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
+ state->err_cb = NULL;
+
+ PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
+ PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
+
+ /* clear the buffer memory */
+ memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
+}
+
+static int
+i2c_send(i2c_state_t *state,
+ unsigned char address,
+ unsigned char secondary_address,
+ unsigned int flags,
+ unsigned short size,
+ unsigned char *dataout)
+{
+ volatile I2C_BD *txbd;
+ int i,j;
+
+ PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
+ address, secondary_address, flags, size));
+
+ /* trying to send message larger than BD */
+ if (size > I2C_RXTX_LEN)
+ return I2CERR_MSG_TOO_LONG;
+
+ /* no more free bds */
+ if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
+ return I2CERR_NO_BUFFERS;
+
+ txbd = (I2C_BD *)state->txbd;
+ txbd->addr = state->tx_buf;
+
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ if (flags & I2CF_START_COND) {
+ PRINTD(("[I2C] Formatting addresses...\n"));
+ if (flags & I2CF_ENABLE_SECONDARY) {
+ txbd->length = size + 2; /* Length of msg + dest addr */
+ txbd->addr[0] = address << 1;
+ txbd->addr[1] = secondary_address;
+ i = 2;
+ } else {
+ txbd->length = size + 1; /* Length of msg + dest addr */
+ txbd->addr[0] = address << 1; /* Write dest addr to BD */
+ i = 1;
+ }
+ } else {
+ txbd->length = size; /* Length of message */
+ i = 0;
+ }
+
+ /* set up txbd */
+ txbd->status = BD_SC_READY;
+ if (flags & I2CF_START_COND)
+ txbd->status |= BD_I2C_TX_START;
+ if (flags & I2CF_STOP_COND)
+ txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+
+ /* Copy data to send into buffer */
+ PRINTD(("[I2C] copy data...\n"));
+ for(j = 0; j < size; i++, j++)
+ txbd->addr[i] = dataout[j];
+
+ PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ txbd->length,
+ txbd->status,
+ txbd->addr[0],
+ txbd->addr[1]));
+
+ /* advance state */
+ state->tx_buf += txbd->length;
+ state->tx_space -= txbd->length;
+ state->tx_idx++;
+ state->txbd = (void*)(txbd + 1);
+
+ return 0;
+}
+
+static int
+i2c_receive(i2c_state_t *state,
+ unsigned char address,
+ unsigned char secondary_address,
+ unsigned int flags,
+ unsigned short size_to_expect,
+ unsigned char *datain)
+{
+ volatile I2C_BD *rxbd, *txbd;
+
+ PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
+
+ /* Expected to receive too much */
+ if (size_to_expect > I2C_RXTX_LEN)
+ return I2CERR_MSG_TOO_LONG;
+
+ /* no more free bds */
+ if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
+ || state->tx_space < 2)
+ return I2CERR_NO_BUFFERS;
+
+ rxbd = (I2C_BD *)state->rxbd;
+ txbd = (I2C_BD *)state->txbd;
+
+ PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+ PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+ txbd->addr = state->tx_buf;
+
+ /* set up TXBD for destination address */
+ if (flags & I2CF_ENABLE_SECONDARY) {
+ txbd->length = 2;
+ txbd->addr[0] = address << 1; /* Write data */
+ txbd->addr[1] = secondary_address; /* Internal address */
+ txbd->status = BD_SC_READY;
+ } else {
+ txbd->length = 1 + size_to_expect;
+ txbd->addr[0] = (address << 1) | 0x01;
+ txbd->status = BD_SC_READY;
+ memset(&txbd->addr[1], 0, txbd->length);
+ }
+
+ /* set up rxbd for reception */
+ rxbd->status = BD_SC_EMPTY;
+ rxbd->length = size_to_expect;
+ rxbd->addr = datain;
+
+ txbd->status |= BD_I2C_TX_START;
+ if (flags & I2CF_STOP_COND) {
+ txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+ rxbd->status |= BD_SC_WRAP;
+ }
+
+ PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ txbd->length,
+ txbd->status,
+ txbd->addr[0],
+ txbd->addr[1]));
+ PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+ rxbd->length,
+ rxbd->status,
+ rxbd->addr[0],
+ rxbd->addr[1]));
+
+ /* advance state */
+ state->tx_buf += txbd->length;
+ state->tx_space -= txbd->length;
+ state->tx_idx++;
+ state->txbd = (void*)(txbd + 1);
+ state->rx_idx++;
+ state->rxbd = (void*)(rxbd + 1);
+
+ return 0;
+}
+
+
+static int i2c_doio(i2c_state_t *state)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+ volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+ volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
+ volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+ volatile I2C_BD *txbd, *rxbd;
+ volatile int j = 0;
+
+ PRINTD(("[I2C] i2c_doio\n"));
+
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
+ iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+
+ if (state->tx_idx <= 0 && state->rx_idx <= 0) {
+ PRINTD(("[I2C] No I/O is queued\n"));
+ return I2CERR_QUEUE_EMPTY;
+ }
+
+ iip->iic_rbptr = iip->iic_rbase;
+ iip->iic_tbptr = iip->iic_tbase;
+
+ /* Enable I2C */
+ PRINTD(("[I2C] Enabling I2C...\n"));
+ i2c->i2c_i2mod |= 0x01;
+
+ /* Begin transmission */
+ i2c->i2c_i2com |= 0x80;
+
+ /* Loop until transmit & receive completed */
+
+ if (state->tx_idx > 0) {
+ txbd = ((I2C_BD*)state->txbd) - 1;
+ PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
+ while((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
+ if (ctrlc()) {
+ return (-1);
+ }
+ __asm__ __volatile__ ("eieio");
+ }
+ }
+
+ if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
+ rxbd = ((I2C_BD*)state->rxbd) - 1;
+ PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
+ while((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
+ if (ctrlc()) {
+ return (-1);
+ }
+ __asm__ __volatile__ ("eieio");
+ }
+ }
+
+ /* Turn off I2C */
+ i2c->i2c_i2mod &= ~0x01;
+
+ if (state->err_cb != NULL) {
+ int n, i, b;
+
+ /*
+ * if we have an error callback function, look at the
+ * error bits in the bd status and pass them back
+ */
+
+ if ((n = state->tx_idx) > 0) {
+ for (i = 0; i < n; i++) {
+ txbd = ((I2C_BD*)state->txbd) - (n - i);
+ if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
+ (*state->err_cb)(I2CECB_TX_ERR|b, i);
+ }
+ }
+
+ if ((n = state->rx_idx) > 0) {
+ for (i = 0; i < n; i++) {
+ rxbd = ((I2C_BD*)state->rxbd) - (n - i);
+ if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
+ (*state->err_cb)(I2CECB_RX_ERR|b, i);
+ }
+ }
+
+ if (j >= TOUT_LOOP)
+ (*state->err_cb)(I2CECB_TIMEOUT, 0);
+ }
+
+ return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0;
+}
+
+static int had_tx_nak;
+
+static void
+i2c_test_callback(int flags, int xnum)
+{
+ if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
+ had_tx_nak = 1;
+}
+
+int i2c_probe(uchar chip)
+{
+ i2c_state_t state;
+ int rc;
+ uchar buf[1];
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ i2c_newio(&state);
+
+ state.err_cb = i2c_test_callback;
+ had_tx_nak = 0;
+
+ rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
+
+ if (rc != 0)
+ return (rc);
+
+ rc = i2c_doio(&state);
+
+ if ((rc != 0) && (rc != I2CERR_TIMEOUT))
+ return (rc);
+
+ return (had_tx_nak);
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ i2c_state_t state;
+ uchar xaddr[4];
+ int rc;
+
+#ifdef CONFIG_LWMON
+ WATCHDOG_RESET();
+#endif
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones like
+ * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
+ * extra bits end up in the "chip address" bit slots. This makes
+ * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to still
+ * be one byte because the extra address bits are hidden in the
+ * chip address.
+ */
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ i2c_newio(&state);
+
+ rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_read: i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_read: i2c_receive failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_doio(&state);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_read: i2c_doio failed (%d)\n", rc);
+ return 1;
+ }
+ return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ i2c_state_t state;
+ uchar xaddr[4];
+ int rc;
+
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones like
+ * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
+ * extra bits end up in the "chip address" bit slots. This makes
+ * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to still
+ * be one byte because the extra address bits are hidden in the
+ * chip address.
+ */
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ i2c_newio(&state);
+
+ rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_write: first i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_write: second i2c_send failed (%d)\n", rc);
+ return 1;
+ }
+
+ rc = i2c_doio(&state);
+ if (rc != 0) {
+ if (gd->have_console)
+ printf("i2c_write: i2c_doio failed (%d)\n", rc);
+ return 1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <mpc8xx_irq.h>
+#include <asm/processor.h>
+#include <commproc.h>
+
+/************************************************************************/
+
+/*
+ * CPM interrupt vector functions.
+ */
+struct interrupt_action {
+ interrupt_handler_t *handler;
+ void *arg;
+};
+
+static struct interrupt_action cpm_vecs[CPMVEC_NR];
+static struct interrupt_action irq_vecs[NR_IRQS];
+
+static void cpm_interrupt_init (void);
+static void cpm_interrupt (void *regs);
+
+/************************************************************************/
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
+
+ /* disable all interrupts */
+ immr->im_siu_conf.sc_simask = 0;
+
+ /* Configure CPM interrupts */
+ cpm_interrupt_init ();
+
+ return (0);
+}
+
+/************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt (struct pt_regs *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int irq;
+ ulong simask, newmask;
+ ulong vec, v_bit;
+
+ /*
+ * read the SIVEC register and shift the bits down
+ * to get the irq number
+ */
+ vec = immr->im_siu_conf.sc_sivec;
+ irq = vec >> 26;
+ v_bit = 0x80000000UL >> irq;
+
+ /*
+ * Read Interrupt Mask Register and Mask Interrupts
+ */
+ simask = immr->im_siu_conf.sc_simask;
+ newmask = simask & (~(0xFFFF0000 >> irq));
+ immr->im_siu_conf.sc_simask = newmask;
+
+ if (!(irq & 0x1)) { /* External Interrupt ? */
+ ulong siel;
+
+ /*
+ * Read Interrupt Edge/Level Register
+ */
+ siel = immr->im_siu_conf.sc_siel;
+
+ if (siel & v_bit) { /* edge triggered interrupt ? */
+ /*
+ * Rewrite SIPEND Register to clear interrupt
+ */
+ immr->im_siu_conf.sc_sipend = v_bit;
+ }
+ }
+
+ if (irq_vecs[irq].handler != NULL) {
+ irq_vecs[irq].handler (irq_vecs[irq].arg);
+ } else {
+ printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
+ irq, vec);
+ /* turn off the bogus interrupt to avoid it from now */
+ simask &= ~v_bit;
+ }
+ /*
+ * Re-Enable old Interrupt Mask
+ */
+ immr->im_siu_conf.sc_simask = simask;
+}
+
+/************************************************************************/
+
+/*
+ * CPM interrupt handler
+ */
+static void cpm_interrupt (void *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ uint vec;
+
+ /*
+ * Get the vector by setting the ACK bit
+ * and then reading the register.
+ */
+ immr->im_cpic.cpic_civr = 1;
+ vec = immr->im_cpic.cpic_civr;
+ vec >>= 11;
+
+ if (cpm_vecs[vec].handler != NULL) {
+ (*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
+ } else {
+ immr->im_cpic.cpic_cimr &= ~(1 << vec);
+ printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
+ }
+ /*
+ * After servicing the interrupt,
+ * we have to remove the status indicator.
+ */
+ immr->im_cpic.cpic_cisr |= (1 << vec);
+}
+
+/*
+ * The CPM can generate the error interrupt when there is a race
+ * condition between generating and masking interrupts. All we have
+ * to do is ACK it and return. This is a no-op function so we don't
+ * need any special tests in the interrupt handler.
+ */
+static void cpm_error_interrupt (void *dummy)
+{
+}
+
+/************************************************************************/
+/*
+ * Install and free an interrupt handler
+ */
+void irq_install_handler (int vec, interrupt_handler_t * handler,
+ void *arg)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ if ((vec & CPMVEC_OFFSET) != 0) {
+ /* CPM interrupt */
+ vec &= 0xffff;
+ if (cpm_vecs[vec].handler != NULL) {
+ printf ("CPM interrupt 0x%x replacing 0x%x\n",
+ (uint) handler,
+ (uint) cpm_vecs[vec].handler);
+ }
+ cpm_vecs[vec].handler = handler;
+ cpm_vecs[vec].arg = arg;
+ immr->im_cpic.cpic_cimr |= (1 << vec);
+#if 0
+ printf ("Install CPM interrupt for vector %d ==> %p\n",
+ vec, handler);
+#endif
+ } else {
+ /* SIU interrupt */
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
+ vec,
+ (uint) handler,
+ (uint) cpm_vecs[vec].handler);
+ }
+ irq_vecs[vec].handler = handler;
+ irq_vecs[vec].arg = arg;
+ immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
+#if 0
+ printf ("Install SIU interrupt for vector %d ==> %p\n",
+ vec, handler);
+#endif
+ }
+}
+
+void irq_free_handler (int vec)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ if ((vec & CPMVEC_OFFSET) != 0) {
+ /* CPM interrupt */
+ vec &= 0xffff;
+#if 0
+ printf ("Free CPM interrupt for vector %d ==> %p\n",
+ vec, cpm_vecs[vec].handler);
+#endif
+ immr->im_cpic.cpic_cimr &= ~(1 << vec);
+ cpm_vecs[vec].handler = NULL;
+ cpm_vecs[vec].arg = NULL;
+ } else {
+ /* SIU interrupt */
+#if 0
+ printf ("Free CPM interrupt for vector %d ==> %p\n",
+ vec, cpm_vecs[vec].handler);
+#endif
+ immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ }
+}
+
+/************************************************************************/
+
+static void cpm_interrupt_init (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ /*
+ * Initialize the CPM interrupt controller.
+ */
+
+ immr->im_cpic.cpic_cicr =
+ (CICR_SCD_SCC4 |
+ CICR_SCC_SCC3 |
+ CICR_SCB_SCC2 |
+ CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
+
+ immr->im_cpic.cpic_cimr = 0;
+
+ /*
+ * Install the error handler.
+ */
+ irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
+
+ immr->im_cpic.cpic_cicr |= CICR_IEN;
+
+ /*
+ * Install the cpm interrupt handler
+ */
+ irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
+}
+
+/************************************************************************/
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#if 0
+ printf ("*** Timer Interrupt *** ");
+#endif
+ /* Reset Timer Expired and Timers Interrupt Status */
+ immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+ __asm__ ("nop");
+ /*
+ Clear TEXPS (and TMIST on older chips). SPLSS (on older
+ chips) is cleared too.
+
+ Bitwise OR is a read-modify-write operation so ALL bits
+ which are cleared by writing `1' would be cleared by
+ operations like
+
+ immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
+
+ The same can be achieved by simple writing of the PLPRCR
+ to itself. If a bit value should be preserved, read the
+ register, ZERO the bit and write, not OR, the result back.
+ */
+ immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
+}
+
+/************************************************************************/
--- /dev/null
+/*
+ * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <version.h>
+
+#define CONFIG_8xx 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+
+ /*
+ * cache flushing routines for kgdb
+ */
+
+ .globl kgdb_flush_cache_all
+kgdb_flush_cache_all:
+ lis r3, IDC_INVALL@h
+ mtspr DC_CST, r3
+ sync
+ lis r3, IDC_INVALL@h
+ mtspr IC_CST, r3
+ SYNC
+ blr
+
+ .globl kgdb_flush_cache_range
+kgdb_flush_cache_range:
+ li r5,CONFIG_SYS_CACHELINE_SIZE-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
+ bdnz 2b
+ SYNC
+ blr
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2001-2002
+ * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************/
+/* ** HEADER FILES */
+/************************************************************************/
+
+/* #define DEBUG */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#include <version.h>
+#include <stdarg.h>
+#include <lcdvideo.h>
+#include <linux/types.h>
+#include <stdio_dev.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+#include <lcd.h>
+
+#ifdef CONFIG_LCD
+
+/************************************************************************/
+/* ** CONFIG STUFF -- should be moved to board config file */
+/************************************************************************/
+#ifndef CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
+#endif
+
+#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
+#undef CONFIG_LCD_LOGO
+#undef CONFIG_LCD_INFO
+#endif
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_KYOCERA_KCS057QV1AJ
+/*
+ * Kyocera KCS057QV1AJ-G23. Passive, color, single scan.
+ */
+#define LCD_BPP LCD_COLOR4
+
+vidinfo_t panel_info = {
+ 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
+ LCD_BPP, 1, 0, 1, 0, 5, 0, 0, 0
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_KYOCERA_KCS057QV1AJ */
+/*----------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_HITACHI_SP19X001_Z1A
+/*
+ * Hitachi SP19X001-. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
+ LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_HITACHI_SP19X001_Z1A */
+/*----------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_NEC_NL6448AC33
+/*
+ * NEC NL6448AC33-18. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 144, 2, 0, 33
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_NEC_NL6448AC33 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_NEC_NL6448BC20
+/*
+ * NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 144, 2, 0, 33
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_NEC_NL6448BC20 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_NEC_NL6448BC33_54
+/*
+ * NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 144, 2, 0, 33
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_NEC_NL6448BC33_54 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_SHARP_LQ104V7DS01
+/*
+ * SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
+ 3, 0, 0, 1, 1, 25, 1, 0, 33
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_SHARP_LQ104V7DS01 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_SHARP_16x9
+/*
+ * Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am
+ * not sure what it is.......
+ */
+vidinfo_t panel_info = {
+ 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 15, 4, 0, 3
+};
+#endif /* CONFIG_SHARP_16x9 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_SHARP_LQ057Q3DC02
+/*
+ * Sharp LQ057Q3DC02 display. Active, color, single scan.
+ */
+#undef LCD_DF
+#define LCD_DF 12
+
+vidinfo_t panel_info = {
+ 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 15, 4, 0, 3
+ /* wbl, vpw, lcdac, wbf */
+};
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#endif /* CONFIG_SHARP_LQ057Q3DC02 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_SHARP_LQ64D341
+/*
+ * Sharp LQ64D341 display, 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 128, 16, 0, 32
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_SHARP_LQ64D341 */
+
+#ifdef CONFIG_SHARP_LQ065T9DR51U
+/*
+ * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 248, 4, 0, 35
+ /* wbl, vpw, lcdac, wbf */
+};
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#endif /* CONFIG_SHARP_LQ065T9DR51U */
+
+#ifdef CONFIG_SHARP_LQ084V1DG21
+/*
+ * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
+ 3, 0, 0, 1, 1, 160, 3, 0, 48
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_SHARP_LQ084V1DG21 */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_HLD1045
+/*
+ * HLD1045 display, 640x480. Active, color, single scan.
+ */
+vidinfo_t panel_info = {
+ 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 160, 3, 0, 48
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_HLD1045 */
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_PRIMEVIEW_V16C6448AC
+/*
+ * Prime View V16C6448AC
+ */
+vidinfo_t panel_info = {
+ 640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
+ 3, 0, 0, 1, 1, 144, 2, 0, 35
+ /* wbl, vpw, lcdac, wbf */
+};
+#endif /* CONFIG_PRIMEVIEW_V16C6448AC */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_OPTREX_BW
+/*
+ * Optrex CBL50840-2 NF-FW 99 22 M5
+ * or
+ * Hitachi LMG6912RPFC-00T
+ * or
+ * Hitachi SP14Q002
+ *
+ * 320x240. Black & white.
+ */
+#define OPTREX_BPP 0 /* 0 - monochrome, 1 bpp */
+ /* 1 - 4 grey levels, 2 bpp */
+ /* 2 - 16 grey levels, 4 bpp */
+vidinfo_t panel_info = {
+ 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
+ OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
+};
+#endif /* CONFIG_OPTREX_BW */
+
+/*-----------------------------------------------------------------*/
+#ifdef CONFIG_EDT32F10
+/*
+ * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
+ */
+#define LCD_BPP LCD_MONOCHROME
+#define LCD_DF 10
+
+vidinfo_t panel_info = {
+ 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
+ LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0
+};
+#endif
+/*----------------------------------------------------------------------*/
+
+
+int lcd_line_length;
+
+int lcd_color_fg;
+int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+/************************************************************************/
+
+void lcd_ctrl_init (void *lcdbase);
+void lcd_enable (void);
+#if LCD_BPP == LCD_COLOR8
+void lcd_setcolreg (ushort regno,
+ ushort red, ushort green, ushort blue);
+#endif
+#if LCD_BPP == LCD_MONOCHROME
+void lcd_initcolregs (void);
+#endif
+
+#if defined(CONFIG_RBC823)
+void lcd_disable (void);
+#endif
+
+/************************************************************************/
+
+/************************************************************************/
+/* ----------------- chipset specific functions ----------------------- */
+/************************************************************************/
+
+/*
+ * Calculate fb size for VIDEOLFB_ATAG.
+ */
+ulong calc_fbsize (void)
+{
+ ulong size;
+ int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
+
+ size = line_length * panel_info.vl_row;
+
+ return size;
+}
+
+void lcd_ctrl_init (void *lcdbase)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile lcd823_t *lcdp = &immr->im_lcd;
+
+ uint lccrtmp;
+ uint lchcr_hpc_tmp;
+
+ /* Initialize the LCD control register according to the LCD
+ * parameters defined. We do everything here but enable
+ * the controller.
+ */
+
+#ifdef CONFIG_RPXLITE
+ /* This is special for RPXlite_DW Software Development Platform **[Sam]** */
+ panel_info.vl_dp = CONFIG_SYS_LOW;
+#endif
+
+ lccrtmp = LCDBIT (LCCR_BNUM_BIT,
+ (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
+
+ lccrtmp |= LCDBIT (LCCR_CLKP_BIT, panel_info.vl_clkp) |
+ LCDBIT (LCCR_OEP_BIT, panel_info.vl_oep) |
+ LCDBIT (LCCR_HSP_BIT, panel_info.vl_hsp) |
+ LCDBIT (LCCR_VSP_BIT, panel_info.vl_vsp) |
+ LCDBIT (LCCR_DP_BIT, panel_info.vl_dp) |
+ LCDBIT (LCCR_BPIX_BIT, panel_info.vl_bpix) |
+ LCDBIT (LCCR_LBW_BIT, panel_info.vl_lbw) |
+ LCDBIT (LCCR_SPLT_BIT, panel_info.vl_splt) |
+ LCDBIT (LCCR_CLOR_BIT, panel_info.vl_clor) |
+ LCDBIT (LCCR_TFT_BIT, panel_info.vl_tft);
+
+#if 0
+ lccrtmp |= ((SIU_LEVEL5 / 2) << 12);
+ lccrtmp |= LCCR_EIEN;
+#endif
+
+ lcdp->lcd_lccr = lccrtmp;
+ lcdp->lcd_lcsr = 0xFF; /* Clear pending interrupts */
+
+ /* Initialize LCD controller bus priorities.
+ */
+#ifdef CONFIG_RBC823
+ immr->im_siu_conf.sc_sdcr = (immr->im_siu_conf.sc_sdcr & ~0x0f) | 1; /* RAID = 01, LAID = 00 */
+#else
+ immr->im_siu_conf.sc_sdcr &= ~0x0f; /* RAID = LAID = 0 */
+
+ /* set SHFT/CLOCK division factor 4
+ * This needs to be set based upon display type and processor
+ * speed. The TFT displays run about 20 to 30 MHz.
+ * I was running 64 MHz processor speed.
+ * The value for this divider must be chosen so the result is
+ * an integer of the processor speed (i.e., divide by 3 with
+ * 64 MHz would be bad).
+ */
+ immr->im_clkrst.car_sccr &= ~0x1F;
+ immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
+
+#endif /* CONFIG_RBC823 */
+
+#if defined(CONFIG_RBC823)
+ /* Enable LCD on port D.
+ */
+ immr->im_ioport.iop_pddat &= 0x0300;
+ immr->im_ioport.iop_pdpar |= 0x1CFF;
+ immr->im_ioport.iop_pddir |= 0x1CFF;
+
+ /* Configure LCD_ON, VEE_ON, CCFL_ON on port B.
+ */
+ immr->im_cpm.cp_pbdat &= ~0x00005001;
+ immr->im_cpm.cp_pbpar &= ~0x00005001;
+ immr->im_cpm.cp_pbdir |= 0x00005001;
+#elif !defined(CONFIG_EDT32F10)
+ /* Enable LCD on port D.
+ */
+ immr->im_ioport.iop_pdpar |= 0x1FFF;
+ immr->im_ioport.iop_pddir |= 0x1FFF;
+
+ /* Enable LCD_A/B/C on port B.
+ */
+ immr->im_cpm.cp_pbpar |= 0x00005001;
+ immr->im_cpm.cp_pbdir |= 0x00005001;
+#else
+ /* Enable LCD on port D.
+ */
+ immr->im_ioport.iop_pdpar |= 0x1DFF;
+ immr->im_ioport.iop_pdpar &= ~0x0200;
+ immr->im_ioport.iop_pddir |= 0x1FFF;
+ immr->im_ioport.iop_pddat |= 0x0200;
+#endif
+
+ /* Load the physical address of the linear frame buffer
+ * into the LCD controller.
+ * BIG NOTE: This has to be modified to load A and B depending
+ * upon the split mode of the LCD.
+ */
+ lcdp->lcd_lcfaa = (ulong)lcd_base;
+ lcdp->lcd_lcfba = (ulong)lcd_base;
+
+ /* MORE HACKS...This must be updated according to 823 manual
+ * for different panels.
+ * Udi Finkelstein - done - see below:
+ * Note: You better not try unsupported combinations such as
+ * 4-bit wide passive dual scan LCD at 4/8 Bit color.
+ */
+ lchcr_hpc_tmp =
+ (panel_info.vl_col *
+ (panel_info.vl_tft ? 8 :
+ (((2 - panel_info.vl_lbw) << /* 4 bit=2, 8-bit = 1 */
+ /* use << to mult by: single scan = 1, dual scan = 2 */
+ panel_info.vl_splt) *
+ (panel_info.vl_bpix | 1)))) >> 3; /* 2/4 BPP = 1, 8/16 BPP = 3 */
+
+ lcdp->lcd_lchcr = LCHCR_BO |
+ LCDBIT (LCHCR_AT_BIT, 4) |
+ LCDBIT (LCHCR_HPC_BIT, lchcr_hpc_tmp) |
+ panel_info.vl_wbl;
+
+ lcdp->lcd_lcvcr = LCDBIT (LCVCR_VPW_BIT, panel_info.vl_vpw) |
+ LCDBIT (LCVCR_LCD_AC_BIT, panel_info.vl_lcdac) |
+ LCDBIT (LCVCR_VPC_BIT, panel_info.vl_row) |
+ panel_info.vl_wbf;
+
+}
+
+/*----------------------------------------------------------------------*/
+
+#ifdef NOT_USED_SO_FAR
+static void
+lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = &(immr->im_cpm);
+ unsigned short colreg, *cmap_ptr;
+
+ cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
+
+ colreg = *cmap_ptr;
+#ifdef CONFIG_SYS_INVERT_COLORS
+ colreg ^= 0x0FFF;
+#endif
+
+ *red = (colreg >> 8) & 0x0F;
+ *green = (colreg >> 4) & 0x0F;
+ *blue = colreg & 0x0F;
+}
+#endif /* NOT_USED_SO_FAR */
+
+/*----------------------------------------------------------------------*/
+
+#if LCD_BPP == LCD_COLOR8
+void
+lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = &(immr->im_cpm);
+ unsigned short colreg, *cmap_ptr;
+
+ cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
+
+ colreg = ((red & 0x0F) << 8) |
+ ((green & 0x0F) << 4) |
+ (blue & 0x0F) ;
+#ifdef CONFIG_SYS_INVERT_COLORS
+ colreg ^= 0x0FFF;
+#endif
+ *cmap_ptr = colreg;
+
+ debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
+ regno, &(cp->lcd_cmap[regno * 2]),
+ red, green, blue,
+ cp->lcd_cmap[ regno * 2 ], cp->lcd_cmap[(regno * 2) + 1]);
+}
+#endif /* LCD_COLOR8 */
+
+/*----------------------------------------------------------------------*/
+
+#if LCD_BPP == LCD_MONOCHROME
+static
+void lcd_initcolregs (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = &(immr->im_cpm);
+ ushort regno;
+
+ for (regno = 0; regno < 16; regno++) {
+ cp->lcd_cmap[regno * 2] = 0;
+ cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
+ }
+}
+#endif
+
+/*----------------------------------------------------------------------*/
+
+void lcd_enable (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile lcd823_t *lcdp = &immr->im_lcd;
+
+ /* Enable the LCD panel */
+#ifndef CONFIG_RBC823
+ immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */
+#endif
+ lcdp->lcd_lccr |= LCCR_PON;
+
+#ifdef CONFIG_V37
+ /* Turn on display backlight */
+ immr->im_cpm.cp_pbpar |= 0x00008000;
+ immr->im_cpm.cp_pbdir |= 0x00008000;
+#elif defined(CONFIG_RBC823)
+ /* Turn on display backlight */
+ immr->im_cpm.cp_pbdat |= 0x00004000;
+#endif
+
+#if defined(CONFIG_LWMON)
+ { uchar c = pic_read (0x60);
+#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
+ /* Enable LCD later in sysmon test, only if temperature is OK */
+#else
+ c |= 0x07; /* Power on CCFL, Enable CCFL, Chip Enable LCD */
+#endif
+ pic_write (0x60, c);
+ }
+#endif /* CONFIG_LWMON */
+
+#if defined(CONFIG_R360MPI)
+ {
+ extern void r360_i2c_lcd_write (uchar data0, uchar data1);
+ unsigned long bgi, ctr;
+ char *p;
+
+ if ((p = getenv("lcdbgi")) != NULL) {
+ bgi = simple_strtoul (p, 0, 10) & 0xFFF;
+ } else {
+ bgi = 0xFFF;
+ }
+
+ if ((p = getenv("lcdctr")) != NULL) {
+ ctr = simple_strtoul (p, 0, 10) & 0xFFF;
+ } else {
+ ctr=0x7FF;
+ }
+
+ r360_i2c_lcd_write(0x10, 0x01);
+ r360_i2c_lcd_write(0x20, 0x01);
+ r360_i2c_lcd_write(0x30 | ((bgi>>8) & 0xF), bgi & 0xFF);
+ r360_i2c_lcd_write(0x40 | ((ctr>>8) & 0xF), ctr & 0xFF);
+ }
+#endif /* CONFIG_R360MPI */
+#ifdef CONFIG_RBC823
+ udelay(200000); /* wait 200ms */
+ /* Turn VEE_ON first */
+ immr->im_cpm.cp_pbdat |= 0x00000001;
+ udelay(200000); /* wait 200ms */
+ /* Now turn on LCD_ON */
+ immr->im_cpm.cp_pbdat |= 0x00001000;
+#endif
+#ifdef CONFIG_RRVISION
+ debug ("PC4->Output(1): enable LVDS\n");
+ debug ("PC5->Output(0): disable PAL clock\n");
+ immr->im_ioport.iop_pddir |= 0x1000;
+ immr->im_ioport.iop_pcpar &= ~(0x0C00);
+ immr->im_ioport.iop_pcdir |= 0x0C00 ;
+ immr->im_ioport.iop_pcdat |= 0x0800 ;
+ immr->im_ioport.iop_pcdat &= ~(0x0400);
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immr->im_ioport.iop_pdpar,
+ immr->im_ioport.iop_pddir,
+ immr->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immr->im_ioport.iop_pcpar,
+ immr->im_ioport.iop_pcdir,
+ immr->im_ioport.iop_pcdat);
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+#if defined (CONFIG_RBC823)
+void lcd_disable (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile lcd823_t *lcdp = &immr->im_lcd;
+
+#if defined(CONFIG_LWMON)
+ { uchar c = pic_read (0x60);
+ c &= ~0x07; /* Power off CCFL, Disable CCFL, Chip Disable LCD */
+ pic_write (0x60, c);
+ }
+#elif defined(CONFIG_R360MPI)
+ {
+ extern void r360_i2c_lcd_write (uchar data0, uchar data1);
+
+ r360_i2c_lcd_write(0x10, 0x00);
+ r360_i2c_lcd_write(0x20, 0x00);
+ r360_i2c_lcd_write(0x30, 0x00);
+ r360_i2c_lcd_write(0x40, 0x00);
+ }
+#endif /* CONFIG_LWMON */
+ /* Disable the LCD panel */
+ lcdp->lcd_lccr &= ~LCCR_PON;
+#ifdef CONFIG_RBC823
+ /* Turn off display backlight, VEE and LCD_ON */
+ immr->im_cpm.cp_pbdat &= ~0x00005001;
+#else
+ immr->im_siu_conf.sc_sdcr &= ~(1 << (31 - 25)); /* LAM = 0 */
+#endif /* CONFIG_RBC823 */
+}
+#endif /* NOT_USED_SO_FAR || CONFIG_RBC823 */
+
+
+/************************************************************************/
+
+#endif /* CONFIG_LCD */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <mpc8xx.h>
+#include <ppc_asm.tmpl>
+#include <asm/cache.h>
+
+#define CACHE_CMD_ENABLE 0x02000000
+#define CACHE_CMD_DISABLE 0x04000000
+#define CACHE_CMD_LOAD_LOCK 0x06000000
+#define CACHE_CMD_UNLOCK_LINE 0x08000000
+#define CACHE_CMD_UNLOCK_ALL 0x0A000000
+#define CACHE_CMD_INVALIDATE 0x0C000000
+#define SPEED_PLPRCR_WAIT_5CYC 150
+#define _CACHE_ALIGN_SIZE 16
+
+
+ .text
+ .align 2
+ .globl plprcr_write_866
+
+/*
+ * void plprcr_write_866 (long plprcr)
+ * Write PLPRCR, including workaround for device errata SIU4 and SIU9.
+ */
+
+plprcr_write_866:
+ mfspr r10, LR /* save the Link Register value */
+
+ /* turn instruction cache on (no MMU required for instructions)
+ */
+ lis r4, CACHE_CMD_ENABLE@h
+ ori r4, r4, CACHE_CMD_ENABLE@l
+ mtspr IC_CST, r4
+ isync
+
+ /* clear IC_CST error bits
+ */
+ mfspr r4, IC_CST
+
+ bl plprcr_here
+
+plprcr_here:
+ mflr r5
+
+ /* calculate relocation offset
+ */
+ lis r4, plprcr_here@h
+ ori r4, r4, plprcr_here@l
+ sub r5, r5, r4
+
+ /* calculate first address of this function
+ */
+ lis r6, plprcr_write_866@h
+ ori r6, r6, plprcr_write_866@l
+ add r6, r6, r5
+
+ /* calculate end address of this function
+ */
+ lis r7, plprcr_end@h
+ ori r7, r7, plprcr_end@l
+ add r7, r7, r5
+
+ /* load and lock code addresses
+ */
+ mr r5, r6
+
+plprcr_loop:
+ mtspr IC_ADR, r5
+ addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */
+
+ lis r4, CACHE_CMD_LOAD_LOCK@h
+ ori r4, r4, CACHE_CMD_LOAD_LOCK@l
+ mtspr IC_CST, r4
+ isync
+
+ cmpw r5, r7
+ blt plprcr_loop
+
+ /* IC_CST error bits not evaluated
+ */
+
+ /* switch PLPRCR
+ */
+ mfspr r4, IMMR /* read IMMR */
+ rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */
+
+ /* write sequence according to MPC866 Errata
+ */
+ stw r3, PLPRCR(r4)
+ isync
+
+ lis r3, SPEED_PLPRCR_WAIT_5CYC@h
+ ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
+
+plprcr_wait:
+ cmpwi r3, 0
+ beq plprcr_wait_end
+ nop
+ subi r3, r3, 1
+ b plprcr_wait
+
+plprcr_wait_end:
+
+ /* unlock instruction cache but leave it enabled
+ */
+ lis r4, CACHE_CMD_UNLOCK_ALL@h
+ ori r4, r4, CACHE_CMD_UNLOCK_ALL@l
+ mtspr IC_CST, r4
+ isync
+
+ mtspr LR, r10 /* restore original Link Register value */
+ blr
+
+plprcr_end:
--- /dev/null
+/*
+ * File: scc.c
+ * Description:
+ * Basic ET HW initialization and packet RX/TX routines
+ *
+ * NOTE <<<IMPORTANT: PLEASE READ>>>:
+ * Do not cache Rx/Tx buffers!
+ */
+
+/*
+ * MPC823 <-> MC68160 Connections:
+ *
+ * Setup MPC823 to work with MC68160 Enhanced Ethernet
+ * Serial Tranceiver as follows:
+ *
+ * MPC823 Signal MC68160 Comments
+ * ------ ------ ------- --------
+ * PA-12 ETHTX --------> TX Eth. Port Transmit Data
+ * PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
+ * PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
+ * PA-13 ETHRX <-------- RX Eth. Port Receive Data
+ * PC-8 E_RENA <-------- RENA Eth. Receive Enable
+ * PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
+ * PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
+ *
+ * FADS Board Signal MC68160 Comments
+ * ----------------- ------- --------
+ * (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
+ * (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
+ * (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
+ * (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <commproc.h>
+#include <net.h>
+#include <command.h>
+
+#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+static int scc_send(struct eth_device* dev, volatile void *packet, int length);
+static int scc_recv(struct eth_device* dev);
+static int scc_init (struct eth_device* dev, bd_t * bd);
+static void scc_halt(struct eth_device* dev);
+
+int scc_initialize(bd_t *bis)
+{
+ struct eth_device* dev;
+
+ dev = (struct eth_device*) malloc(sizeof *dev);
+ memset(dev, 0, sizeof *dev);
+
+ sprintf(dev->name, "SCC ETHERNET");
+ dev->iobase = 0;
+ dev->priv = 0;
+ dev->init = scc_init;
+ dev->halt = scc_halt;
+ dev->send = scc_send;
+ dev->recv = scc_recv;
+
+ eth_register(dev);
+
+ return 1;
+}
+
+static int scc_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int i, j=0;
+#if 0
+ volatile char *in, *out;
+#endif
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+#if 0
+ while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
+ out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
+ in = packet;
+ for(i = 0; i < length; i++) {
+ *out++ = *in++;
+ }
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
+ while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
+
+#ifdef ET_DEBUG
+ printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
+#endif
+ i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
+
+ /* wrap around buffer index when necessary */
+ if (txIdx >= TX_BUF_CNT) txIdx = 0;
+#endif
+
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j>=TOUT_LOOP) printf("TX not ready\n");
+ rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j>=TOUT_LOOP) printf("TX timeout\n");
+#ifdef ET_DEBUG
+ printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
+#endif
+ i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
+ return i;
+}
+
+static int scc_recv (struct eth_device *dev)
+{
+ int length;
+
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+ printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
+#endif
+ } else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[rxIdx], length - 4);
+ }
+
+
+ /* Give the buffer back to the SCC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+ }
+ return length;
+}
+
+/**************************************************************
+ *
+ * SCC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+static int scc_init (struct eth_device *dev, bd_t * bis)
+{
+
+ int i;
+ scc_enet_t *pram_ptr;
+
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#if defined(CONFIG_LWMON)
+ reset_phy();
+#endif
+
+#ifdef CONFIG_FADS
+#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
+ /* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
+ *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#else
+ *((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif
+#endif
+
+ pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
+
+ rxIdx = 0;
+ txIdx = 0;
+
+ if (!rtx) {
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+ dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+ }
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+ /* Configure port A pins for Txd and Rxd.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+ /* Configure port B pins for Txd and Rxd.
+ */
+ immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+ /* Configure port C pins to disable External Loopback
+ */
+ immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
+ immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port A for TCLK and RCLK.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+ /*
+ * Configure Serial Interface clock routing -- see section 16.7.5.3
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+
+ immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
+ immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
+
+
+ /*
+ * Initialize SDCR -- see section 16.9.23.7
+ * SDMA configuration register
+ */
+ immr->im_siu_conf.sc_sdcr = 0x01;
+
+
+ /*
+ * Setup SCC Ethernet Parameter RAM
+ */
+
+ pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
+ pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
+
+ pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
+
+ pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
+ pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
+
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
+ */
+
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc =
+ (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /*
+ * Enter Command: Initialize Rx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Ethernet Specific Parameter RAM
+ * see table 13-16, pg. 660,
+ * pg. 681 (example with suggested settings)
+ */
+
+ pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
+ pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
+ pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
+ pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
+ pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
+ pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
+
+ pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
+ pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
+ pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
+
+ pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
+ pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
+
+ pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
+ pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
+ pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
+ pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
+
+#define ea eth_get_dev()->enetaddr
+ pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+ pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
+ pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
+ pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
+ pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
+ pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
+ pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
+ pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
+ pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
+
+ /*
+ * Enter Command: Initialize Tx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Mask all Events in SCCM - we use polling mode
+ */
+ immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
+
+ /*
+ * Clear Events in SCCE -- Clear bits by writing 1's
+ */
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
+
+
+ /*
+ * Initialize GSMR High 32-Bits
+ * Settings: Normal Mode
+ */
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
+
+ /*
+ * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
+ * Settings:
+ * TCI = Invert
+ * TPL = 48 bits
+ * TPP = Repeating 10's
+ * MODE = Ethernet
+ */
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
+ SCC_GSMRL_TPL_48 |
+ SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
+
+ /*
+ * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
+ */
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
+
+ /*
+ * Initialize the PSMR
+ * Settings:
+ * CRC = 32-Bit CCITT
+ * NIB = Begin searching for SFD 22 bits after RENA
+ * FDE = Full Duplex Enable
+ * LPB = Loopback Enable (Needed when FDE is set)
+ * BRO = Reject broadcast packets
+ * PROMISCOUS = Catch all packets regardless of dest. MAC adress
+ */
+ immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
+ SCC_PSMR_NIB22 |
+#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
+ SCC_PSMR_FDE | SCC_PSMR_LPB |
+#endif
+#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
+ SCC_PSMR_BRO |
+#endif
+#if defined(CONFIG_SCC_ENET_PROMISCOUS)
+ SCC_PSMR_PRO |
+#endif
+ 0;
+
+ /*
+ * Configure Ethernet TENA Signal
+ */
+
+#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
+ immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
+ immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
+ immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
+ immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
+#endif
+
+#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
+ /*
+ * Port C is used to control the PHY,MC68160.
+ */
+ immr->im_ioport.iop_pcdir |=
+ (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
+ immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif /* MPC860ADS */
+
+#if defined(CONFIG_AMX860)
+ /*
+ * Port B is used to control the PHY,MC68160.
+ */
+ immr->im_cpm.cp_pbdir |=
+ (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
+
+ immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
+ immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
+ immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
+#endif /* AMX860 */
+
+#ifdef CONFIG_RPXCLASSIC
+ *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
+ *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
+#endif
+
+#ifdef CONFIG_RPXLITE
+ *((uchar *) BCSR0) |= BCSR0_ETHEN;
+#endif
+
+#if defined(CONFIG_QS860T)
+ /*
+ * PB27=FDE-, set output low for full duplex
+ * PB26=Link Test Enable, normally high output
+ */
+ immr->im_cpm.cp_pbdir |= 0x00000030;
+ immr->im_cpm.cp_pbdat |= 0x00000020;
+ immr->im_cpm.cp_pbdat &= ~0x00000010;
+#endif /* QS860T */
+
+#ifdef CONFIG_MBX
+ board_ether_init ();
+#endif
+
+#if defined(CONFIG_NETVIA)
+#if defined(PA_ENET_PDN)
+ immr->im_ioport.iop_papar &= ~PA_ENET_PDN;
+ immr->im_ioport.iop_padir |= PA_ENET_PDN;
+ immr->im_ioport.iop_padat |= PA_ENET_PDN;
+#elif defined(PB_ENET_PDN)
+ immr->im_cpm.cp_pbpar &= ~PB_ENET_PDN;
+ immr->im_cpm.cp_pbdir |= PB_ENET_PDN;
+ immr->im_cpm.cp_pbdat |= PB_ENET_PDN;
+#elif defined(PC_ENET_PDN)
+ immr->im_ioport.iop_pcpar &= ~PC_ENET_PDN;
+ immr->im_ioport.iop_pcdir |= PC_ENET_PDN;
+ immr->im_ioport.iop_pcdat |= PC_ENET_PDN;
+#elif defined(PD_ENET_PDN)
+ immr->im_ioport.iop_pdpar &= ~PD_ENET_PDN;
+ immr->im_ioport.iop_pddir |= PD_ENET_PDN;
+ immr->im_ioport.iop_pddat |= PD_ENET_PDN;
+#endif
+#endif
+
+ /*
+ * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
+ */
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
+ (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /*
+ * Work around transmit problem with first eth packet
+ */
+#if defined (CONFIG_FADS)
+ udelay (10000); /* wait 10 ms */
+#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+ udelay (100000); /* wait 100 ms */
+#endif
+
+ return 1;
+}
+
+
+static void scc_halt (struct eth_device *dev)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+}
+
+#if 0
+void restart (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
+ (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+#endif
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <command.h>
+#include <serial.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
+
+#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
+#define SMC_INDEX 0
+#define PROFF_SMC PROFF_SMC1
+#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
+
+#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
+#define SMC_INDEX 1
+#define PROFF_SMC PROFF_SMC2
+#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
+
+#endif /* CONFIG_8xx_CONS_SMCx */
+
+#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
+#define SCC_INDEX 0
+#define PROFF_SCC PROFF_SCC1
+#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
+
+#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
+#define SCC_INDEX 1
+#define PROFF_SCC PROFF_SCC2
+#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
+
+#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
+#define SCC_INDEX 2
+#define PROFF_SCC PROFF_SCC3
+#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
+
+#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
+#define SCC_INDEX 3
+#define PROFF_SCC PROFF_SCC4
+#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
+
+#endif /* CONFIG_8xx_CONS_SCCx */
+
+#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
+#define CONFIG_SYS_SMC_RXBUFLEN 1
+#define CONFIG_SYS_MAXIDLE 0
+#else
+#if !defined(CONFIG_SYS_MAXIDLE)
+#error "you must define CONFIG_SYS_MAXIDLE"
+#endif
+#endif
+
+typedef volatile struct serialbuffer {
+ cbd_t rxbd; /* Rx BD */
+ cbd_t txbd; /* Tx BD */
+ uint rxindex; /* index for next character to read */
+ volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
+ volatile uchar txbuf; /* tx buffers */
+} serialbuffer_t;
+
+static void serial_setdivisor(volatile cpm8xx_t *cp)
+{
+ int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
+
+ if(divisor/16>0x1000) {
+ /* bad divisor, assume 50MHz clock and 9600 baud */
+ divisor=(50*1000*1000 + 8*9600)/16/9600;
+ }
+
+#ifdef CONFIG_SYS_BRGCLK_PRESCALE
+ divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
+#endif
+
+ if(divisor<=0x1000) {
+ cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
+ } else {
+ cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
+ }
+}
+
+#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+static void smc_setbrg (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+
+ /* Set up the baud rate generator.
+ * See 8xx_io/commproc.c for details.
+ *
+ * Wire BRG1 to SMCx
+ */
+
+ cp->cp_simode = 0x00000000;
+
+ serial_setdivisor(cp);
+}
+
+static int smc_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
+ volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
+#endif
+ uint dpaddr;
+ volatile serialbuffer_t *rtx;
+
+ /* initialize pointers to SMC */
+
+ sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
+ up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
+#else
+ /* Disable relocation */
+ up->smc_rpbase = 0;
+#endif
+
+ /* Disable transmitter/receiver. */
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* Enable SDMA. */
+ im->im_siu_conf.sc_sdcr = 1;
+
+ /* clear error conditions */
+#ifdef CONFIG_SYS_SDSR
+ im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
+#else
+ im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+ /* clear SDMA interrupt mask */
+#ifdef CONFIG_SYS_SDMR
+ im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
+#else
+ im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+#if defined(CONFIG_8xx_CONS_SMC1)
+ /* Use Port B for SMC1 instead of other functions. */
+ cp->cp_pbpar |= 0x000000c0;
+ cp->cp_pbdir &= ~0x000000c0;
+ cp->cp_pbodr &= ~0x000000c0;
+#else /* CONFIG_8xx_CONS_SMC2 */
+# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
+ /* Use Port A for SMC2 instead of other functions. */
+ ip->iop_papar |= 0x00c0;
+ ip->iop_padir &= ~0x00c0;
+ ip->iop_paodr &= ~0x00c0;
+# else /* must be a 860 then */
+ /* Use Port B for SMC2 instead of other functions.
+ */
+ cp->cp_pbpar |= 0x00000c00;
+ cp->cp_pbdir &= ~0x00000c00;
+ cp->cp_pbodr &= ~0x00000c00;
+# endif
+#endif
+
+#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
+ /* Enable RS232 */
+#if defined(CONFIG_8xx_CONS_SMC1)
+ *((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
+#else
+ *((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
+#endif
+#endif /* CONFIG_FADS */
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+ /* Enable Monitor Port Transceiver */
+ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
+#endif /* CONFIG_RPXLITE */
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ /* allocate
+ * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
+ */
+ dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
+#else
+ dpaddr = CPM_SERIAL_BASE ;
+#endif
+
+ rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * For now, this address seems OK, but it may have to
+ * change with newer versions of the firmware.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
+ rtx->rxbd.cbd_sc = 0;
+
+ rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
+ rtx->txbd.cbd_sc = 0;
+
+ /* Set up the uart parameters in the parameter ram. */
+ up->smc_rbase = dpaddr;
+ up->smc_tbase = dpaddr+sizeof(cbd_t);
+ up->smc_rfcr = SMC_EB;
+ up->smc_tfcr = SMC_EB;
+#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
+ up->smc_rbptr = up->smc_rbase;
+ up->smc_tbptr = up->smc_tbase;
+ up->smc_rstate = 0;
+ up->smc_tstate = 0;
+#endif
+
+#if defined(CONFIG_MBX)
+ board_serial_init();
+#endif /* CONFIG_MBX */
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
+ /* clock source is PLD */
+
+ /* set freq to 19200 Baud */
+ *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
+ /* configure clk4 as input */
+ im->im_ioport.iop_pdpar |= 0x800;
+ im->im_ioport.iop_pddir &= ~0x800;
+
+ cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
+#else
+ /* Set up the baud rate generator */
+ smc_setbrg ();
+#endif
+
+ /* Make the first buffer the only buffer. */
+ rtx->txbd.cbd_sc |= BD_SC_WRAP;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* single/multi character receive. */
+ up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
+ up->smc_maxidl = CONFIG_SYS_MAXIDLE;
+ rtx->rxindex = 0;
+
+ /* Initialize Tx/Rx parameters. */
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver. */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+
+ return (0);
+}
+
+static void
+smc_putc(const char c)
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ volatile serialbuffer_t *rtx;
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (gd->be_quiet)
+ return;
+#endif
+
+ if (c == '\n')
+ smc_putc ('\r');
+
+ up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
+
+ rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
+
+ /* Wait for last character to go. */
+ rtx->txbuf = c;
+ rtx->txbd.cbd_datlen = 1;
+ rtx->txbd.cbd_sc |= BD_SC_READY;
+ __asm__("eieio");
+
+ while (rtx->txbd.cbd_sc & BD_SC_READY) {
+ WATCHDOG_RESET ();
+ __asm__("eieio");
+ }
+}
+
+static void
+smc_puts (const char *s)
+{
+ while (*s) {
+ smc_putc (*s++);
+ }
+}
+
+static int
+smc_getc(void)
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ volatile serialbuffer_t *rtx;
+ unsigned char c;
+
+ up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
+ rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
+
+ /* Wait for character to show up. */
+ while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
+ WATCHDOG_RESET ();
+
+ /* the characters are read one by one,
+ * use the rxindex to know the next char to deliver
+ */
+ c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
+ rtx->rxindex++;
+
+ /* check if all char are readout, then make prepare for next receive */
+ if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
+ rtx->rxindex = 0;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
+ }
+ return(c);
+}
+
+static int
+smc_tstc(void)
+{
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ volatile serialbuffer_t *rtx;
+
+ up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
+
+ rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
+
+ return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
+}
+
+struct serial_device serial_smc_device =
+{
+ "serial_smc",
+ "SMC",
+ smc_init,
+ smc_setbrg,
+ smc_getc,
+ smc_tstc,
+ smc_putc,
+ smc_puts,
+};
+
+#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
+
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
+ defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+
+static void
+scc_setbrg (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+
+ /* Set up the baud rate generator.
+ * See 8xx_io/commproc.c for details.
+ *
+ * Wire BRG1 to SCCx
+ */
+
+ cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
+
+ serial_setdivisor(cp);
+}
+
+static int scc_init (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ uint dpaddr;
+#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
+ volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
+#endif
+
+ /* initialize pointers to SCC */
+
+ sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
+ up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
+
+#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
+ { /* Disable Ethernet, enable Serial */
+ uchar c;
+
+ c = pic_read (0x61);
+ c &= ~0x40; /* enable COM3 */
+ c |= 0x80; /* disable Ethernet */
+ pic_write (0x61, c);
+
+ /* enable RTS2 */
+ cp->cp_pbpar |= 0x2000;
+ cp->cp_pbdat |= 0x2000;
+ cp->cp_pbdir |= 0x2000;
+ }
+#endif /* CONFIG_LWMON */
+
+ /* Disable transmitter/receiver. */
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
+ /*
+ * The MPC850 has SCC3 on Port B
+ */
+ cp->cp_pbpar |= 0x06;
+ cp->cp_pbdir &= ~0x06;
+ cp->cp_pbodr &= ~0x06;
+
+#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
+ /*
+ * Standard configuration for SCC's is on Part A
+ */
+ ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
+ ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
+ ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
+#else
+ /*
+ * The IP860 has SCC3 and SCC4 on Port D
+ */
+ ip->iop_pdpar |= ((3 << (2 * SCC_INDEX)));
+#endif
+
+ /* Allocate space for two buffer descriptors in the DP ram. */
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
+#else
+ dpaddr = CPM_SERIAL2_BASE ;
+#endif
+
+ /* Enable SDMA. */
+ im->im_siu_conf.sc_sdcr = 0x0001;
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+ rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf+2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the baud rate generator. */
+ scc_setbrg ();
+
+ /* Set up the uart parameters in the parameter ram. */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+
+ /* Initialize Tx/Rx parameters. */
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
+ up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
+
+ up->scc_genscc.scc_mrblr = 1; /* Single character receive */
+ up->scc_maxidl = 0; /* disable max idle */
+ up->scc_brkcr = 1; /* send one break character on stop TX */
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = 0x8000;
+ up->scc_char2 = 0x8000;
+ up->scc_char3 = 0x8000;
+ up->scc_char4 = 0x8000;
+ up->scc_char5 = 0x8000;
+ up->scc_char6 = 0x8000;
+ up->scc_char7 = 0x8000;
+ up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Set low latency / small fifo. */
+ sp->scc_gsmrh = SCC_GSMRH_RFW;
+
+ /* Set SCC(x) clock mode to 16x
+ * See 8xx_io/commproc.c for details.
+ *
+ * Wire BRG1 to SCCn
+ */
+
+ /* Set UART mode, clock divider 16 on Tx and Rx */
+ sp->scc_gsmrl &= ~0xF;
+ sp->scc_gsmrl |=
+ (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ sp->scc_psmr = 0;
+ sp->scc_psmr |= SCU_PSMR_CL;
+
+ /* Mask all interrupts and remove anything pending. */
+ sp->scc_sccm = 0;
+ sp->scc_scce = 0xffff;
+ sp->scc_dsr = 0x7e7e;
+ sp->scc_psmr = 0x3000;
+
+ /* Make the first buffer the only buffer. */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Enable transmitter/receiver. */
+ sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ return (0);
+}
+
+static void
+scc_putc(const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (gd->be_quiet)
+ return;
+#endif
+
+ if (c == '\n')
+ scc_putc ('\r');
+
+ up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
+
+ tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
+
+ /* Wait for last character to go. */
+
+ buf = (char *)tbdf->cbd_bufaddr;
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+ __asm__("eieio");
+
+ while (tbdf->cbd_sc & BD_SC_READY) {
+ __asm__("eieio");
+ WATCHDOG_RESET ();
+ }
+}
+
+static void
+scc_puts (const char *s)
+{
+ while (*s) {
+ scc_putc (*s++);
+ }
+}
+
+static int
+scc_getc(void)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ unsigned char c;
+
+ up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
+
+ rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+ /* Wait for character to show up. */
+ buf = (unsigned char *)rbdf->cbd_bufaddr;
+
+ while (rbdf->cbd_sc & BD_SC_EMPTY)
+ WATCHDOG_RESET ();
+
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return(c);
+}
+
+static int
+scc_tstc(void)
+{
+ volatile cbd_t *rbdf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+ up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
+
+ rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+ return(!(rbdf->cbd_sc & BD_SC_EMPTY));
+}
+
+struct serial_device serial_scc_device =
+{
+ "serial_scc",
+ "SCC",
+ scc_init,
+ scc_setbrg,
+ scc_getc,
+ scc_tstc,
+ scc_putc,
+ scc_puts,
+};
+
+#endif /* CONFIG_8xx_CONS_SCCx */
+
+#ifdef CONFIG_MODEM_SUPPORT
+void disable_putc(void)
+{
+ gd->be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+ gd->be_quiet = 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+
+void
+kgdb_serial_init(void)
+{
+ int i = -1;
+
+ if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ {
+#if defined(CONFIG_8xx_CONS_SMC1)
+ i = 1;
+#elif defined(CONFIG_8xx_CONS_SMC2)
+ i = 2;
+#endif
+ }
+ else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ {
+#if defined(CONFIG_8xx_CONS_SCC1)
+ i = 1;
+#elif defined(CONFIG_8xx_CONS_SCC2)
+ i = 2;
+#elif defined(CONFIG_8xx_CONS_SCC3)
+ i = 3;
+#elif defined(CONFIG_8xx_CONS_SCC4)
+ i = 4;
+#endif
+ }
+
+ if (i >= 0)
+ {
+ serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
+ }
+}
+
+void
+putDebugChar (int c)
+{
+ serial_putc (c);
+}
+
+void
+putDebugStr (const char *str)
+{
+ serial_puts (str);
+}
+
+int
+getDebugChar (void)
+{
+ return serial_getc();
+}
+
+void
+kgdb_interruptible (int yes)
+{
+ return;
+}
+#endif
+
+#endif /* CONFIG_8xx_CONS_NONE */
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
+
+#define PITC_SHIFT 16
+#define PITR_SHIFT 16
+/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
+#define SPEED_PIT_COUNTS 58
+#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
+#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
+
+/* Access functions for the Machine State Register */
+static __inline__ unsigned long get_msr(void)
+{
+ unsigned long msr;
+
+ asm volatile("mfmsr %0" : "=r" (msr) :);
+ return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+ asm volatile("mtmsr %0" : : "r" (msr));
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2),
+ * also determine bus clock speed (checking bus divider factor)
+ *
+ * (Approx. GCLK frequency in Hz)
+ *
+ * Initializes timer 2 and PIT, but disables them before return.
+ * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
+ *
+ * When measuring the CPU clock against the PIT, we count cpu clocks
+ * for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
+ * These strange values for the timing interval and prescaling are used
+ * because the formula for the CPU clock is:
+ *
+ * CPU clock = count * (177 * (8192 / 58))
+ *
+ * = count * 24999.7241
+ *
+ * which is very close to
+ *
+ * = count * 25000
+ *
+ * Since the count gives the CPU clock divided by 25000, we can get
+ * the CPU clock rounded to the nearest 0.1 MHz by
+ *
+ * CPU clock = ((count + 2) / 4) * 100000;
+ *
+ * The rounding is important since the measurement is sometimes going
+ * to be high or low by 0.025 MHz, depending on exactly how the clocks
+ * and counters interact. By rounding we get the exact answer for any
+ * CPU clock that is an even multiple of 0.1 MHz.
+ */
+
+unsigned long measure_gclk(void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
+ ulong timer2_val;
+ ulong msr_val;
+
+#ifdef CONFIG_SYS_8XX_XIN
+ /* dont use OSCM, only use EXTCLK/512 */
+ immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
+#else
+ immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
+#endif
+
+ /* Reset + Stop Timer 2, no cascading
+ */
+ timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
+
+ /* Keep stopped, halt in debug mode
+ */
+ timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
+
+ /* Timer 2 setup:
+ * Output ref. interrupt disable, int. clock
+ * Prescale by 177. Note that prescaler divides by value + 1
+ * so we must subtract 1 here.
+ */
+ timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
+
+ timerp->cpmt_tcn2 = 0; /* reset state */
+ timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
+
+ /*
+ * PIT setup:
+ *
+ * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
+ * so the count value would be SPEED_PITC_COUNTS - 1.
+ * But there would be an uncertainty in the start time of 1/4
+ * count since when we enable the PIT the count is not
+ * synchronized to the 32768 Hz oscillator. The trick here is
+ * to start the count higher and wait until the PIT count
+ * changes to the required value before starting timer 2.
+ *
+ * One count high should be enough, but occasionally the start
+ * is off by 1 or 2 counts of 32768 Hz. With the start value
+ * set two counts high it seems very reliable.
+ */
+
+ immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
+ immr->im_sit.sit_pitc = SPEED_PITC_INIT;
+
+ immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+ immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+ /*
+ * Start measurement - disable interrupts, just in case
+ */
+ msr_val = get_msr ();
+ set_msr (msr_val & ~MSR_EE);
+
+ immr->im_sit.sit_piscr |= PISCR_PTE;
+
+ /* spin until get exact count when we want to start */
+ while (immr->im_sit.sit_pitr > SPEED_PITC);
+
+ timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
+ while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
+ timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
+
+ /* re-enable external interrupts if they were on */
+ set_msr (msr_val);
+
+ /* Disable timer and PIT
+ */
+ timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
+
+ timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
+ immr->im_sit.sit_piscr &= ~PISCR_PTE;
+
+#if defined(CONFIG_SYS_8XX_XIN)
+ /* not using OSCM, using XIN, so scale appropriately */
+ return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
+#else
+ return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
+#endif
+}
+
+#endif
+
+void get_brgclk(uint sccr)
+{
+ uint divider = 0;
+
+ switch((sccr&SCCR_DFBRG11)>>11){
+ case 0:
+ divider = 1;
+ break;
+ case 1:
+ divider = 4;
+ break;
+ case 2:
+ divider = 16;
+ break;
+ case 3:
+ divider = 64;
+ break;
+ }
+ gd->brg_clk = gd->cpu_clk/divider;
+}
+
+#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
+
+/*
+ * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
+ * or (if it is not defined) measure_gclk() (which uses the ref clock)
+ * from above.
+ */
+int get_clocks (void)
+{
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint sccr = immap->im_clkrst.car_sccr;
+ /*
+ * If for some reason measuring the gclk frequency won't
+ * work, we return the hardwired value.
+ * (For example, the cogent CMA286-60 CPU module has no
+ * separate oscillator for PITRTCLK)
+ */
+#if defined(CONFIG_8xx_GCLK_FREQ)
+ gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
+#elif defined(CONFIG_8xx_OSCLK)
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+ uint pll = immap->im_clkrst.car_plprcr;
+ uint clk;
+
+ if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+ clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
+ (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
+ (1<<PLPRCR_val(S));
+ } else {
+ clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
+ }
+ if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
+ gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
+ } else { /* High frequency division factor is used */
+ gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
+ }
+#else
+ gd->cpu_clk = measure_gclk();
+#endif /* CONFIG_8xx_GCLK_FREQ */
+
+ if ((sccr & SCCR_EBDF11) == 0) {
+ /* No Bus Divider active */
+ gd->bus_clk = gd->cpu_clk;
+ } else {
+ /* The MPC8xx has only one BDF: half clock speed */
+ gd->bus_clk = gd->cpu_clk / 2;
+ }
+
+ get_brgclk(sccr);
+
+ return (0);
+}
+
+#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
+
+static long init_pll_866 (long clk);
+
+/* This function sets up PLL (init_pll_866() is called) and
+ * fills gd->cpu_clk and gd->bus_clk according to the environment
+ * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
+ * contains invalid value).
+ * This functions requires an MPC866 or newer series CPU.
+ */
+int get_clocks_866 (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ char tmp[64];
+ long cpuclk = 0;
+ long sccr_reg;
+
+ if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0)
+ cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
+
+ if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
+ cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
+
+ gd->cpu_clk = init_pll_866 (cpuclk);
+#if defined(CONFIG_SYS_MEASURE_CPUCLK)
+ gd->cpu_clk = measure_gclk ();
+#endif
+
+ get_brgclk(immr->im_clkrst.car_sccr);
+
+ /* if cpu clock <= 66 MHz then set bus division factor to 1,
+ * otherwise set it to 2
+ */
+ sccr_reg = immr->im_clkrst.car_sccr;
+ sccr_reg &= ~SCCR_EBDF11;
+
+ if (gd->cpu_clk <= 66000000) {
+ sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
+ gd->bus_clk = gd->cpu_clk;
+ } else {
+ sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */
+ gd->bus_clk = gd->cpu_clk / 2;
+ }
+ immr->im_clkrst.car_sccr = sccr_reg;
+
+ return (0);
+}
+
+/* Adjust sdram refresh rate to actual CPU clock.
+ */
+int sdram_adjust_866 (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ long mamr;
+
+ mamr = immr->im_memctl.memc_mamr;
+ mamr &= ~MAMR_PTA_MSK;
+ mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
+ immr->im_memctl.memc_mamr = mamr;
+
+ return (0);
+}
+
+/* Configure PLL for MPC866/859/885 CPU series
+ * PLL multiplication factor is set to the value nearest to the desired clk,
+ * assuming a oscclk of 10 MHz.
+ */
+static long init_pll_866 (long clk)
+{
+ extern void plprcr_write_866 (long);
+
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ long n, plprcr;
+ char mfi, mfn, mfd, s, pdf;
+ long step_mfi, step_mfn;
+
+ if (clk < 20000000) {
+ clk *= 2;
+ pdf = 1;
+ } else {
+ pdf = 0;
+ }
+
+ if (clk < 40000000) {
+ s = 2;
+ step_mfi = CONFIG_8xx_OSCLK / 4;
+ mfd = 7;
+ step_mfn = CONFIG_8xx_OSCLK / 30;
+ } else if (clk < 80000000) {
+ s = 1;
+ step_mfi = CONFIG_8xx_OSCLK / 2;
+ mfd = 14;
+ step_mfn = CONFIG_8xx_OSCLK / 30;
+ } else {
+ s = 0;
+ step_mfi = CONFIG_8xx_OSCLK;
+ mfd = 29;
+ step_mfn = CONFIG_8xx_OSCLK / 30;
+ }
+
+ /* Calculate integer part of multiplication factor
+ */
+ n = clk / step_mfi;
+ mfi = (char)n;
+
+ /* Calculate numerator of fractional part of multiplication factor
+ */
+ n = clk - (n * step_mfi);
+ mfn = (char)(n / step_mfn);
+
+ /* Calculate effective clk
+ */
+ n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
+
+ immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+ plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
+ | PLPRCR_MFD_MSK | PLPRCR_S_MSK
+ | PLPRCR_MFI_MSK | PLPRCR_DBRMO
+ | PLPRCR_PDF_MSK))
+ | (mfn << PLPRCR_MFN_SHIFT)
+ | (mfd << PLPRCR_MFD_SHIFT)
+ | (s << PLPRCR_S_SHIFT)
+ | (mfi << PLPRCR_MFI_SHIFT)
+ | (pdf << PLPRCR_PDF_SHIFT);
+
+ if( (mfn > 0) && ((mfd / mfn) > 10) )
+ plprcr |= PLPRCR_DBRMO;
+
+ plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */
+ immr->im_clkrstk.cark_plprcrk = 0x00000000;
+
+ return (n);
+}
+
+#endif /* CONFIG_8xx_CPUCLK_DEFAULT */
+
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+ && !defined(CONFIG_TQM885D)
+/*
+ * Adjust sdram refresh rate to actual CPU clock
+ * and set timebase source according to actual CPU clock
+ */
+int adjust_sdram_tbs_8xx (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ long mamr;
+ long sccr;
+
+ mamr = immr->im_memctl.memc_mamr;
+ mamr &= ~MAMR_PTA_MSK;
+ mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
+ immr->im_memctl.memc_mamr = mamr;
+
+ if (gd->cpu_clk < 67000000) {
+ sccr = immr->im_clkrst.car_sccr;
+ sccr |= SCCR_TBS;
+ immr->im_clkrst.car_sccr = sccr;
+ }
+
+ return (0);
+}
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ * <nboppuri@trinetcommunication.com>,
+ * <pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <serial.h>
+
+#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef DEBUG
+
+#define SPI_EEPROM_WREN 0x06
+#define SPI_EEPROM_RDSR 0x05
+#define SPI_EEPROM_READ 0x03
+#define SPI_EEPROM_WRITE 0x02
+
+/* ---------------------------------------------------------------
+ * Offset for initial SPI buffers in DPRAM:
+ * We need a 520 byte scratch DPRAM area to use at an early stage.
+ * It is used between the two initialization calls (spi_init_f()
+ * and spi_init_r()).
+ * The value 0xb00 makes it far enough from the start of the data
+ * area (as well as from the stack pointer).
+ * --------------------------------------------------------------- */
+#ifndef CONFIG_SYS_SPI_INIT_OFFSET
+#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
+#endif
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+
+#endif /* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+#define MAX_BUFFER 0x104
+
+/* ----------------------------------------------------------------------
+ * Initially we place the RX and TX buffers at a fixed location in DPRAM!
+ * ---------------------------------------------------------------------- */
+static uchar *rxbuf =
+ (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+ [CONFIG_SYS_SPI_INIT_OFFSET];
+static uchar *txbuf =
+ (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+ [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_f (void)
+{
+ unsigned int dpaddr;
+
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cpic8xx_t *cpi;
+ volatile cpm8xx_t *cp;
+ volatile iop8xx_t *iop;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cpi = (cpic8xx_t *)&immr->im_cpic;
+ iop = (iop8xx_t *) &immr->im_ioport;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+/* 1 */
+ /* ------------------------------------------------
+ * Initialize Port B SPI pins -> page 34-8 MPC860UM
+ * (we are only in Master Mode !)
+ * ------------------------------------------------ */
+
+ /* --------------------------------------------
+ * GPIO or per. Function
+ * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
+ * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
+ * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
+ * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
+ * -------------------------------------------- */
+ cp->cp_pbpar |= 0x0000000E; /* set bits */
+ cp->cp_pbpar &= ~0x00000001; /* reset bit */
+
+ /* ----------------------------------------------
+ * In/Out or per. Function 0/1
+ * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
+ * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
+ * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
+ * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
+ * ---------------------------------------------- */
+ cp->cp_pbdir |= 0x0000000F;
+
+ /* ----------------------------------------------
+ * open drain or active output
+ * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
+ * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
+ * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
+ * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
+ * ---------------------------------------------- */
+
+ cp->cp_pbodr |= 0x00000008;
+ cp->cp_pbodr &= ~0x00000007;
+
+ /* Initialize the parameter ram.
+ * We need to make sure many things are initialized to zero
+ */
+ spi->spi_rstate = 0;
+ spi->spi_rdp = 0;
+ spi->spi_rbptr = 0;
+ spi->spi_rbc = 0;
+ spi->spi_rxtmp = 0;
+ spi->spi_tstate = 0;
+ spi->spi_tdp = 0;
+ spi->spi_tbptr = 0;
+ spi->spi_tbc = 0;
+ spi->spi_txtmp = 0;
+
+ /* Allocate space for one transmit and one receive buffer
+ * descriptor in the DP ram
+ */
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
+#else
+ dpaddr = CPM_SPI_BASE;
+#endif
+
+/* 3 */
+ /* Set up the SPI parameters in the parameter ram */
+ spi->spi_rbase = dpaddr;
+ spi->spi_tbase = dpaddr + sizeof (cbd_t);
+
+ /***********IMPORTANT******************/
+
+ /*
+ * Setting transmit and receive buffer descriptor pointers
+ * initially to rbase and tbase. Only the microcode patches
+ * documentation talks about initializing this pointer. This
+ * is missing from the sample I2C driver. If you dont
+ * initialize these pointers, the kernel hangs.
+ */
+ spi->spi_rbptr = spi->spi_rbase;
+ spi->spi_tbptr = spi->spi_tbase;
+
+/* 4 */
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+ /*
+ * Initialize required parameters if using microcode patch.
+ */
+ spi->spi_rstate = 0;
+ spi->spi_tstate = 0;
+#else
+ /* Init SPI Tx + Rx Parameters */
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+#endif /* CONFIG_SYS_SPI_UCODE_PATCH */
+
+/* 5 */
+ /* Set SDMA configuration register */
+ immr->im_siu_conf.sc_sdcr = 0x0001;
+
+/* 6 */
+ /* Set to big endian. */
+ spi->spi_tfcr = SMC_EB;
+ spi->spi_rfcr = SMC_EB;
+
+/* 7 */
+ /* Set maximum receive size. */
+ spi->spi_mrblr = MAX_BUFFER;
+
+/* 8 + 9 */
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ tbdf->cbd_sc &= ~BD_SC_READY;
+ rbdf->cbd_sc &= ~BD_SC_EMPTY;
+
+ /* Set the bd's rx and tx buffer address pointers */
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+/* 10 + 11 */
+ cp->cp_spim = 0; /* Mask all SPI events */
+ cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
+
+ return;
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ *
+ * Description: Init SPI-Controller (RAM part) -
+ * The malloc engine is ready and we can move our buffers to
+ * normal RAM
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+ volatile cpm8xx_t *cp;
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ /* Allocate memory for RX and TX buffers */
+ rxbuf = (uchar *) malloc (MAX_BUFFER);
+ txbuf = (uchar *) malloc (MAX_BUFFER);
+
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+ return;
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ *txbuf = SPI_EEPROM_WREN; /* write enable */
+ spi_xfer(1);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
+ memcpy(alen + txbuf, buffer, len);
+ spi_xfer(alen + len);
+ /* ignore received data */
+ for (i = 0; i < 1000; i++) {
+ *txbuf = SPI_EEPROM_RDSR; /* read status */
+ txbuf[1] = 0;
+ spi_xfer(2);
+ if (!(rxbuf[1] & 1)) {
+ break;
+ }
+ udelay(1000);
+ }
+ if (i >= 1000) {
+ printf ("*** spi_write: Time out while writing!\n");
+ }
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_READ; /* READ memory array */
+
+ /*
+ * There is a bug in 860T (?) that cuts the last byte of input
+ * if we're reading into DPRAM. The solution we choose here is
+ * to always read len+1 bytes (we have one extra byte at the
+ * end of the buffer).
+ */
+ spi_xfer(alen + len + 1);
+ memcpy(buffer, alen + rxbuf, len);
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+ volatile immap_t *immr;
+ volatile cpm8xx_t *cp;
+ volatile spi_t *spi;
+ cbd_t *tbdf, *rbdf;
+ ushort loop;
+ int tm;
+
+ DPRINT (("*** spi_xfer entered ***\n"));
+
+ immr = (immap_t *) CONFIG_SYS_IMMR;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ /* Set CS for device */
+ cp->cp_pbdat &= ~0x0001;
+
+ /* Setting tx bd status and data length */
+ tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
+ tbdf->cbd_datlen = count;
+
+ DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
+ tbdf->cbd_datlen));
+
+ /* Setting rx bd status and data length */
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ rbdf->cbd_datlen = 0; /* rx length has no significance */
+
+ loop = cp->cp_spmode & SPMODE_LOOP;
+ cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
+ loop |
+ SPMODE_REV |
+ SPMODE_MSTR |
+ SPMODE_EN |
+ SPMODE_LEN(8) | /* 8 Bits per char */
+ SPMODE_PM(0x8) ; /* medium speed */
+ cp->cp_spim = 0; /* Mask all SPI events */
+ cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
+
+ /* start spi transfer */
+ DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+ cp->cp_spcom |= SPI_STR; /* Start transmit */
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * -------------------------------- */
+ for (tm=0; tm<1000; ++tm) {
+ if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
+ DPRINT (("*** spi_xfer: Tx buffer empty\n"));
+ break;
+ }
+ if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
+ DPRINT (("*** spi_xfer: Tx BD done\n"));
+ break;
+ }
+ udelay (1000);
+ }
+ if (tm >= 1000) {
+ printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+ }
+ DPRINT (("*** spi_xfer: ... transfer ended\n"));
+
+#ifdef DEBUG
+ printf ("\nspi_xfer: txbuf after xfer\n");
+ memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
+ printf ("spi_xfer: rxbuf after xfer\n");
+ memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
+ printf ("\n");
+#endif
+
+ /* Clear CS for device */
+ cp->cp_pbdat |= 0x0001;
+
+ return count;
+}
+#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
+
+/*
+ * SPI test
+ *
+ * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
+ * The interface is configured accordingly and several packets
+ * are transfered. The configurable test parameters are:
+ * TEST_MIN_LENGTH - minimum size of packet to transfer
+ * TEST_MAX_LENGTH - maximum size of packet to transfer
+ * TEST_NUM - number of tests
+ */
+
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
+
+#define TEST_MIN_LENGTH 1
+#define TEST_MAX_LENGTH MAX_BUFFER
+#define TEST_NUM 1
+
+static void packet_fill (char * packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 0; i < length; i++)
+ {
+ packet[i] = c++;
+ }
+}
+
+static int packet_check (char * packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 0; i < length; i++) {
+ if (packet[i] != c++) return -1;
+ }
+
+ return 0;
+}
+
+int spi_post_test (int flags)
+{
+ int res = -1;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
+ int i;
+ int l;
+
+ spi_init_f ();
+ spi_init_r ();
+
+ cp->cp_spmode |= SPMODE_LOOP;
+
+ for (i = 0; i < TEST_NUM; i++) {
+ for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
+ packet_fill ((char *)txbuf, l);
+
+ spi_xfer (l);
+
+ if (packet_check ((char *)rxbuf, l) < 0) {
+ goto Done;
+ }
+ }
+ }
+
+ res = 0;
+
+ Done:
+
+ cp->cp_spmode &= ~SPMODE_LOOP;
+
+ /*
+ * SCC2 parameter RAM space overlaps
+ * the SPI parameter RAM space. So we need to restore
+ * the SCC2 configuration if it is used by UART.
+ */
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
+
+ if (res != 0) {
+ post_log ("SPI test failed\n");
+ }
+
+ return res;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* U-Boot - Startup Code for PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0x00000100 and the code is executed
+ * from flash. The code is organized to be at an other address
+ * in memory, but as long we don't jump around before relocating,
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memory map.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <config.h>
+#include <mpc8xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define CONFIG_8xx 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
+ mtspr 638, r3
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+boot_cold:
+boot_warm:
+
+ /* Initialize machine status; enable machine check interrupt */
+ /*----------------------------------------------------------------------*/
+ li r3, MSR_KERNEL /* Set ME, RI flags */
+ mtmsr r3
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+ mfspr r3, ICR /* clear Interrupt Cause Register */
+
+ /* Initialize debug port registers */
+ /*----------------------------------------------------------------------*/
+ xor r0, r0, r0 /* Clear R0 */
+ mtspr LCTRL1, r0 /* Initialize debug port regs */
+ mtspr LCTRL2, r0
+ mtspr COUNTA, r0
+ mtspr COUNTB, r0
+
+ /* Reset the caches */
+ /*----------------------------------------------------------------------*/
+
+ mfspr r3, IC_CST /* Clear error bits */
+ mfspr r3, DC_CST
+
+ lis r3, IDC_UNALL@h /* Unlock all */
+ mtspr IC_CST, r3
+ mtspr DC_CST, r3
+
+ lis r3, IDC_INVALL@h /* Invalidate all */
+ mtspr IC_CST, r3
+ mtspr DC_CST, r3
+
+ lis r3, IDC_DISABLE@h /* Disable data cache */
+ mtspr DC_CST, r3
+
+#if !defined(CONFIG_SYS_DELAYED_ICACHE)
+ /* On IP860 and PCU E,
+ * we cannot enable IC yet
+ */
+ lis r3, IDC_ENABLE@h /* Enable instruction cache */
+#endif
+ mtspr IC_CST, r3
+
+ /* invalidate all tlb's */
+ /*----------------------------------------------------------------------*/
+
+ tlbia
+ isync
+
+ /*
+ * Calculate absolute address in FLASH and jump there
+ *----------------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+
+ /* initialize some SPRs that are hard to access from C */
+ /*----------------------------------------------------------------------*/
+
+ lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */
+ ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
+ /* Note: R0 is still 0 here */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ /*
+ * Disable serialized ifetch and show cycles
+ * (i.e. set processor to normal mode).
+ * This is also a silicon bug workaround, see errata
+ */
+
+ li r2, 0x0007
+ mtspr ICTRL, r2
+
+ /* Set up debug mode entry */
+
+ lis r2, CONFIG_SYS_DER@h
+ ori r2, r2, CONFIG_SYS_DER@l
+ mtspr DER, r2
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*----------------------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ mr r3, r21
+ /* r3: BOOTFLAG */
+ bl board_init_f /* run 1st part of board init code (from Flash) */
+
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. "Never" generated on the 860. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ /* No FPU on MPC8xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ /* On the MPC8xx, this is a software emulation interrupt. It occurs
+ * for all unimplemented and illegal instructions.
+ */
+ STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = 0x2000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/* Cache functions.
+*/
+ .globl icache_enable
+icache_enable:
+ SYNC
+ lis r3, IDC_INVALL@h
+ mtspr IC_CST, r3
+ lis r3, IDC_ENABLE@h
+ mtspr IC_CST, r3
+ blr
+
+ .globl icache_disable
+icache_disable:
+ SYNC
+ lis r3, IDC_DISABLE@h
+ mtspr IC_CST, r3
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, IC_CST
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+#if 0
+ SYNC
+#endif
+#if 1
+ lis r3, 0x0400 /* Set cache mode with MMU off */
+ mtspr MD_CTR, r3
+#endif
+
+ lis r3, IDC_INVALL@h
+ mtspr DC_CST, r3
+#if 0
+ lis r3, DC_SFWT@h
+ mtspr DC_CST, r3
+#endif
+ lis r3, IDC_ENABLE@h
+ mtspr DC_CST, r3
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ SYNC
+ lis r3, IDC_DISABLE@h
+ mtspr DC_CST, r3
+ lis r3, IDC_INVALL@h
+ mtspr DC_CST, r3
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, DC_CST
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dc_read
+dc_read:
+ mtspr DC_ADR, r3
+ mfspr r3, DC_DAT
+ blr
+
+/*
+ * unsigned int get_immr (unsigned int mask)
+ *
+ * return (mask ? (IMMR & mask) : IMMR);
+ */
+ .globl get_immr
+get_immr:
+ mr r4,r3 /* save mask */
+ mfspr r3, IMMR /* IMMR */
+ cmpwi 0,r4,0 /* mask != 0 ? */
+ beq 4f
+ and r3,r3,r4 /* IMMR & mask */
+4:
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+
+ .globl wr_ic_cst
+wr_ic_cst:
+ mtspr IC_CST, r3
+ blr
+
+ .globl rd_ic_cst
+rd_ic_cst:
+ mfspr r3, IC_CST
+ blr
+
+ .globl wr_ic_adr
+wr_ic_adr:
+ mtspr IC_ADR, r3
+ blr
+
+
+ .globl wr_dc_cst
+wr_dc_cst:
+ mtspr DC_CST, r3
+ blr
+
+ .globl rd_dc_cst
+rd_dc_cst:
+ mfspr r3, DC_CST
+ blr
+
+ .globl wr_dc_adr
+wr_dc_adr:
+ mtspr DC_ADR, r3
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mtlr r4 /* restore link register */
+ blr
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM 0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0)
+ {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7)
+ {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ printf("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ printf("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ printf("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ printf("Address parity signal\n");
+ break;
+ default:
+ printf("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+#include <common.h>
+#include <commproc.h>
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+ defined(CONFIG_SYS_SMC_UCODE_PATCH)
+
+static void UcodeCopy (volatile cpm8xx_t *cpm);
+
+void cpm_load_patch (volatile immap_t *immr)
+{
+ immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
+
+ UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+ {
+ volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
+ /* Activate the microcode per the instructions in the microcode manual */
+ /* NOTE: We're only relocating the SPI parameters (not I2C). */
+ immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
+ immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
+ spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
+ }
+#endif
+
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
+ {
+ volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
+ /* Activate the microcode per the instructions in the microcode manual */
+ /* NOTE: We're only relocating the I2C parameters (not SPI). */
+ immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
+ immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
+ iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
+ }
+#endif
+
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ {
+ volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
+ /* Activate the microcode per the instructions in the microcode manual */
+ /* NOTE: We're only relocating the SMC parameters. */
+ immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
+ immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
+ up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
+ }
+#endif
+
+ /*
+ * Enable DPRAM microcode to execute from the first 512 bytes
+ * and a 256 byte extension of DPRAM.
+ */
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
+ immr->im_cpm.cp_rccr |= 0x0002;
+#else
+ immr->im_cpm.cp_rccr |= 0x0001;
+#endif
+}
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
+static ulong patch_2000[] = {
+ 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
+ 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
+ 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
+ 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
+ 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
+ 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
+ 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
+ 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
+ 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
+ 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
+ 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
+ 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
+ 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
+ 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
+ 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
+ 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
+ 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
+ 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
+ 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
+ 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
+ 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
+ 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
+ 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
+ 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
+ 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
+ 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
+ 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
+ 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
+ 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
+ 0x7FBDB081, 0x5F8147F8,
+};
+
+static ulong patch_2F00[] = {
+ 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
+ 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
+ 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
+ 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
+ 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
+ 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
+ 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
+ 0x19797937, 0x69350000,
+};
+#else
+
+static ulong patch_2000[] = {
+ 0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
+ 0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
+ 0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
+ 0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
+ 0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
+ 0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
+ 0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
+ 0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
+ 0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
+ 0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
+ 0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
+ 0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
+ 0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
+ 0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
+ 0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
+ 0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
+ 0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
+ 0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
+ 0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
+ 0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
+ 0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
+ 0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
+ 0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
+ 0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
+ 0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
+ 0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
+ 0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
+ 0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
+ 0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
+ 0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
+ 0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
+ 0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
+ 0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
+ 0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
+ 0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
+ 0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
+ 0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
+ 0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
+ 0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
+ 0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
+ 0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
+ 0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
+ 0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
+ 0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
+ 0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
+ 0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
+ 0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
+ 0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
+ 0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
+ 0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
+ 0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
+ 0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
+ 0xe2bb2ff9, 0x6079e2bb,
+};
+
+static ulong patch_2F00[] = {
+ 0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
+ 0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
+ 0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
+ 0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
+ 0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
+ 0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
+ 0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
+ 0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
+ 0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
+ 0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
+ 0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
+ 0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
+ 0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
+ 0xf22f0000,
+};
+#endif
+
+static void UcodeCopy (volatile cpm8xx_t *cpm)
+{
+ vu_long *p;
+ int i;
+
+ p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
+ for (i=0; i < sizeof(patch_2000)/4; ++i) {
+ p[i] = patch_2000[i];
+ }
+
+ p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
+ for (i=0; i < sizeof(patch_2F00)/4; ++i) {
+ p[i] = patch_2F00[i];
+ }
+}
+
+#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ * (C) Copyright 2002
+ * Wolfgang Denk, wd@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+/************************************************************************/
+/* ** HEADER FILES */
+/************************************************************************/
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <version.h>
+#include <timestamp.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <stdio_dev.h>
+
+#ifdef CONFIG_VIDEO
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/************************************************************************/
+/* ** DEBUG SETTINGS */
+/************************************************************************/
+
+#if 0
+#define VIDEO_DEBUG_COLORBARS /* Force colorbars output */
+#endif
+
+/************************************************************************/
+/* ** VIDEO MODE SETTINGS */
+/************************************************************************/
+
+#if 0
+#define VIDEO_MODE_EXTENDED /* Allow screen size bigger than visible area */
+#define VIDEO_MODE_NTSC
+#endif
+
+#define VIDEO_MODE_PAL
+
+#if 0
+#define VIDEO_BLINK /* This enables cursor blinking (under construction) */
+#endif
+
+#define VIDEO_INFO /* Show U-Boot information */
+#define VIDEO_INFO_X VIDEO_LOGO_WIDTH+8
+#define VIDEO_INFO_Y 16
+
+/************************************************************************/
+/* ** VIDEO ENCODER CONSTANTS */
+/************************************************************************/
+
+#ifdef CONFIG_VIDEO_ENCODER_AD7176
+
+#include <video_ad7176.h> /* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C 1
+#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7176_ADDR
+#endif
+
+#ifdef CONFIG_VIDEO_ENCODER_AD7177
+
+#include <video_ad7177.h> /* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C 1
+#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7177_ADDR
+#endif
+
+#ifdef CONFIG_VIDEO_ENCODER_AD7179
+
+#include <video_ad7179.h> /* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C 1
+#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7179_ADDR
+#endif
+
+/************************************************************************/
+/* ** VIDEO MODE CONSTANTS */
+/************************************************************************/
+
+#ifdef VIDEO_MODE_EXTENDED
+#define VIDEO_COLS VIDEO_ACTIVE_COLS
+#define VIDEO_ROWS VIDEO_ACTIVE_ROWS
+#else
+#define VIDEO_COLS VIDEO_VISIBLE_COLS
+#define VIDEO_ROWS VIDEO_VISIBLE_ROWS
+#endif
+
+#define VIDEO_PIXEL_SIZE (VIDEO_MODE_BPP/8)
+#define VIDEO_SIZE (VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Total size of buffer */
+#define VIDEO_PIX_BLOCKS (VIDEO_SIZE >> 2) /* Number of ints */
+#define VIDEO_LINE_LEN (VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Number of bytes per line */
+#define VIDEO_BURST_LEN (VIDEO_COLS/8)
+
+#ifdef VIDEO_MODE_YUYV
+#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
+#else
+#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
+#endif
+
+/************************************************************************/
+/* ** FONT AND LOGO DATA */
+/************************************************************************/
+
+#include <video_font.h> /* Get font data, width and height */
+
+#ifdef CONFIG_VIDEO_LOGO
+#include <video_logo.h> /* Get logo data, width and height */
+
+#define VIDEO_LOGO_WIDTH DEF_U_BOOT_LOGO_WIDTH
+#define VIDEO_LOGO_HEIGHT DEF_U_BOOT_LOGO_HEIGHT
+#define VIDEO_LOGO_ADDR &u_boot_logo
+#endif
+
+/************************************************************************/
+/* ** VIDEO CONTROLLER CONSTANTS */
+/************************************************************************/
+
+/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */
+
+#define VIDEO_VCCR_VON 0 /* Video controller ON */
+#define VIDEO_VCCR_CSRC 1 /* Clock source */
+#define VIDEO_VCCR_PDF 13 /* Pixel display format */
+#define VIDEO_VCCR_IEN 11 /* Interrupt enable */
+
+/* VSR - VIDEO STATUS REGISTER */
+
+#define VIDEO_VSR_CAS 6 /* Active set */
+#define VIDEO_VSR_EOF 0 /* End of frame */
+
+/* VCMR - VIDEO COMMAND REGISTER */
+
+#define VIDEO_VCMR_BD 0 /* Blank display */
+#define VIDEO_VCMR_ASEL 1 /* Active set selection */
+
+/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */
+
+#define VIDEO_BCSR4_RESET_BIT 21 /* BCSR4 - Extern video encoder reset */
+#define VIDEO_BCSR4_EXTCLK_BIT 22 /* BCSR4 - Extern clock enable */
+#define VIDEO_BCSR4_VIDLED_BIT 23 /* BCSR4 - Video led disable */
+
+/************************************************************************/
+/* ** CONSOLE CONSTANTS */
+/************************************************************************/
+
+#ifdef CONFIG_VIDEO_LOGO
+#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
+#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
+#else
+#define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT)
+#endif
+
+#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
+#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
+#define CONSOLE_ROW_FIRST (video_console_address)
+#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
+#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
+#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
+#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
+
+/*
+ * Simple color definitions
+ */
+#define CONSOLE_COLOR_BLACK 0
+#define CONSOLE_COLOR_RED 1
+#define CONSOLE_COLOR_GREEN 2
+#define CONSOLE_COLOR_YELLOW 3
+#define CONSOLE_COLOR_BLUE 4
+#define CONSOLE_COLOR_MAGENTA 5
+#define CONSOLE_COLOR_CYAN 6
+#define CONSOLE_COLOR_GREY 13
+#define CONSOLE_COLOR_GREY2 14
+#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
+
+/************************************************************************/
+/* ** BITOPS MACROS */
+/************************************************************************/
+
+#define HISHORT(i) ((i >> 16)&0xffff)
+#define LOSHORT(i) (i & 0xffff)
+#define HICHAR(s) ((i >> 8)&0xff)
+#define LOCHAR(s) (i & 0xff)
+#define HI(c) ((c >> 4)&0xf)
+#define LO(c) (c & 0xf)
+#define SWAPINT(i) (HISHORT(i) | (LOSHORT(i) << 16))
+#define SWAPSHORT(s) (HICHAR(s) | (LOCHAR(s) << 8))
+#define SWAPCHAR(c) (HI(c) | (LO(c) << 4))
+#define BITMASK(b) (1 << (b))
+#define GETBIT(v,b) (((v) & BITMASK(b)) > 0)
+#define SETBIT(v,b,d) (v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b)))
+
+/************************************************************************/
+/* ** STRUCTURES */
+/************************************************************************/
+
+typedef struct {
+ unsigned char V, Y1, U, Y2;
+} tYUYV;
+
+/* This structure is based on the Video Ram in the MPC823. */
+typedef struct VRAM {
+ unsigned hx:2, /* Horizontal sync */
+ vx:2, /* Vertical sync */
+ fx:2, /* Frame */
+ bx:2, /* Blank */
+ res1:6, /* Reserved */
+ vds:2, /* Video Data Select */
+ inter:1, /* Interrupt */
+ res2:2, /* Reserved */
+ lcyc:11, /* Loop/video cycles */
+ lp:1, /* Loop start/end */
+ lst:1; /* Last entry */
+} VRAM;
+
+/************************************************************************/
+/* ** VARIABLES */
+/************************************************************************/
+
+static int
+ video_panning_range_x = 0, /* Video mode invisible pixels x range */
+ video_panning_range_y = 0, /* Video mode invisible pixels y range */
+ video_panning_value_x = 0, /* Video mode x panning value (absolute) */
+ video_panning_value_y = 0, /* Video mode y panning value (absolute) */
+ video_panning_factor_x = 0, /* Video mode x panning value (-127 +127) */
+ video_panning_factor_y = 0, /* Video mode y panning value (-127 +127) */
+ console_col = 0, /* Cursor col */
+ console_row = 0, /* Cursor row */
+ video_palette[16]; /* Our palette */
+
+static const int video_font_draw_table[] =
+ { 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff };
+
+static char
+ video_color_fg = 0, /* Current fg color index (0-15) */
+ video_color_bg = 0, /* Current bg color index (0-15) */
+ video_enable = 0; /* Video has been initialized? */
+
+static void
+ *video_fb_address, /* Frame buffer address */
+ *video_console_address; /* Console frame buffer start address */
+
+/************************************************************************/
+/* ** MEMORY FUNCTIONS (32bit) */
+/************************************************************************/
+
+static void memsetl (int *p, int c, int v)
+{
+ while (c--)
+ *(p++) = v;
+}
+
+static void memcpyl (int *d, int *s, int c)
+{
+ while (c--)
+ *(d++) = *(s++);
+}
+
+/************************************************************************/
+/* ** VIDEO DRAWING AND COLOR FUNCTIONS */
+/************************************************************************/
+
+static int video_maprgb (int r, int g, int b)
+{
+#ifdef VIDEO_MODE_YUYV
+ unsigned int pR, pG, pB;
+ tYUYV YUYV;
+ unsigned int *ret = (unsigned int *) &YUYV;
+
+ /* Transform (0-255) components to (0-100) */
+
+ pR = r * 100 / 255;
+ pG = g * 100 / 255;
+ pB = b * 100 / 255;
+
+ /* Calculate YUV values (0-255) from RGB beetween 0-100 */
+
+ YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
+ YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
+ YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
+ return *ret;
+#endif
+#ifdef VIDEO_MODE_RGB
+ return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3);
+#endif
+}
+
+static void video_setpalette (int color, int r, int g, int b)
+{
+ color &= 0xf;
+
+ video_palette[color] = video_maprgb (r, g, b);
+
+ /* Swap values if our panning offset is odd */
+ if (video_panning_value_x & 1)
+ video_palette[color] = SWAPINT (video_palette[color]);
+}
+
+static void video_fill (int color)
+{
+ memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color);
+}
+
+static void video_setfgcolor (int i)
+{
+ video_color_fg = i & 0xf;
+}
+
+static void video_setbgcolor (int i)
+{
+ video_color_bg = i & 0xf;
+}
+
+static int video_pickcolor (int i)
+{
+ return video_palette[i & 0xf];
+}
+
+/* Absolute console plotting functions */
+
+#ifdef VIDEO_BLINK
+static void video_revchar (int xx, int yy)
+{
+ int rows;
+ u8 *dest;
+
+ dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2;
+
+ for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) {
+ switch (VIDEO_FONT_WIDTH) {
+ case 16:
+ ((u32 *) dest)[6] ^= 0xffffffff;
+ ((u32 *) dest)[7] ^= 0xffffffff;
+ /* FALL THROUGH */
+ case 12:
+ ((u32 *) dest)[4] ^= 0xffffffff;
+ ((u32 *) dest)[5] ^= 0xffffffff;
+ /* FALL THROUGH */
+ case 8:
+ ((u32 *) dest)[2] ^= 0xffffffff;
+ ((u32 *) dest)[3] ^= 0xffffffff;
+ /* FALL THROUGH */
+ case 4:
+ ((u32 *) dest)[0] ^= 0xffffffff;
+ ((u32 *) dest)[1] ^= 0xffffffff;
+ }
+ }
+}
+#endif
+
+static void video_drawchars (int xx, int yy, unsigned char *s, int count)
+{
+ u8 *cdat, *dest, *dest0;
+ int rows, offset, c;
+ u32 eorx, fgx, bgx;
+
+ offset = yy * VIDEO_LINE_LEN + xx * 2;
+ dest0 = video_fb_address + offset;
+
+ fgx = video_pickcolor (video_color_fg);
+ bgx = video_pickcolor (video_color_bg);
+
+ if (xx & 1) {
+ fgx = SWAPINT (fgx);
+ bgx = SWAPINT (bgx);
+ }
+
+ eorx = fgx ^ bgx;
+
+ switch (VIDEO_FONT_WIDTH) {
+ case 4:
+ case 8:
+ while (count--) {
+ c = *s;
+ cdat = video_fontdata + c * VIDEO_FONT_HEIGHT;
+ for (rows = VIDEO_FONT_HEIGHT, dest = dest0;
+ rows--;
+ dest += VIDEO_LINE_LEN) {
+ u8 bits = *cdat++;
+
+ ((u32 *) dest)[0] =
+ (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
+ ((u32 *) dest)[1] =
+ (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
+ if (VIDEO_FONT_WIDTH == 8) {
+ ((u32 *) dest)[2] =
+ (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
+ ((u32 *) dest)[3] =
+ (video_font_draw_table[bits & 3] & eorx) ^ bgx;
+ }
+ }
+ dest0 += VIDEO_FONT_WIDTH * 2;
+ s++;
+ }
+ break;
+ case 12:
+ case 16:
+ while (count--) {
+ cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1);
+ for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--;
+ dest += VIDEO_LINE_LEN) {
+ u8 bits = *cdat++;
+
+ ((u32 *) dest)[0] =
+ (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
+ ((u32 *) dest)[1] =
+ (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
+ ((u32 *) dest)[2] =
+ (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
+ ((u32 *) dest)[3] =
+ (video_font_draw_table[bits & 3] & eorx) ^ bgx;
+ bits = *cdat++;
+ ((u32 *) dest)[4] =
+ (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
+ ((u32 *) dest)[5] =
+ (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
+ if (VIDEO_FONT_WIDTH == 16) {
+ ((u32 *) dest)[6] =
+ (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
+ ((u32 *) dest)[7] =
+ (video_font_draw_table[bits & 3] & eorx) ^ bgx;
+ }
+ }
+ s++;
+ dest0 += VIDEO_FONT_WIDTH * 2;
+ }
+ break;
+ }
+}
+
+static inline void video_drawstring (int xx, int yy, char *s)
+{
+ video_drawchars (xx, yy, (unsigned char *)s, strlen (s));
+}
+
+/* Relative to console plotting functions */
+
+static void video_putchars (int xx, int yy, unsigned char *s, int count)
+{
+#ifdef CONFIG_VIDEO_LOGO
+ video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count);
+#else
+ video_drawchars (xx, yy, s, count);
+#endif
+}
+
+static void video_putchar (int xx, int yy, unsigned char c)
+{
+#ifdef CONFIG_VIDEO_LOGO
+ video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
+#else
+ video_drawchars (xx, yy, &c, 1);
+#endif
+}
+
+static inline void video_putstring (int xx, int yy, unsigned char *s)
+{
+ video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s));
+}
+
+/************************************************************************/
+/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
+/************************************************************************/
+
+#if !defined(CONFIG_RRVISION)
+static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
+{
+ int i;
+
+ for (i = 0; i < entries; i++) {
+ dest[i] = source[i]; /* Copy the entire record */
+ dest[i].fx = (!dest[i].fx) * 3; /* Negate field bit */
+ }
+
+ dest[0].lcyc++; /* Add a cycle to the first entry */
+ dest[entries - 1].lst = 1; /* Set end of ram entries */
+}
+#endif
+
+static void inline video_mode_addentry (VRAM * vr,
+ int Hx, int Vx, int Fx, int Bx,
+ int VDS, int INT, int LCYC, int LP, int LST)
+{
+ vr->hx = Hx;
+ vr->vx = Vx;
+ vr->fx = Fx;
+ vr->bx = Bx;
+ vr->vds = VDS;
+ vr->inter = INT;
+ vr->lcyc = LCYC;
+ vr->lp = LP;
+ vr->lst = LST;
+}
+
+#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
+
+static int video_mode_generate (void)
+{
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ VRAM *vr = (VRAM *) (((void *) immap) + 0xb00); /* Pointer to the VRAM table */
+ int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
+
+ /* CHECKING PARAMETERS */
+
+ if (video_panning_factor_y < -128)
+ video_panning_factor_y = -128;
+
+ if (video_panning_factor_y > 128)
+ video_panning_factor_y = 128;
+
+ if (video_panning_factor_x < -128)
+ video_panning_factor_x = -128;
+
+ if (video_panning_factor_x > 128)
+ video_panning_factor_x = 128;
+
+ /* Setting panning */
+
+ DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2;
+ DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2;
+
+ video_panning_value_x = (video_panning_factor_x + 128) * DX / 256;
+ video_panning_value_y = (video_panning_factor_y + 128) * DY / 256;
+
+ /* We assume these are burst units (multiplied by 2, we need it pari) */
+ X1 = video_panning_value_x & 0xfffe;
+ X2 = DX - X1;
+
+ /* We assume these are field line units (divided by 2, we need it pari) */
+ Y1 = video_panning_value_y & 0xfffe;
+ Y2 = DY - Y1;
+
+ debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
+ X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
+
+#ifdef VIDEO_MODE_NTSC
+/*
+ * Hx Vx Fx Bx VDS INT LCYC LP LST
+ *
+ * Retrace blanking
+ */
+ ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
+/*
+ * Vertical blanking
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
+/*
+ * Odd field active area (TOP)
+ */
+ if (Y1 > 0) {
+ ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
+ }
+/*
+ * Odd field active area
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
+
+ if (X2 > 0)
+ ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0);
+
+ ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
+
+/*
+ * Odd field active area (BOTTOM)
+ */
+ if (Y1 > 0) {
+ ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
+ }
+/*
+ * Vertical blanking
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
+/*
+ * Vertical blanking
+ */
+ ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
+/*
+ * Even field active area (TOP)
+ */
+ if (Y1 > 0) {
+ ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
+ }
+/*
+ * Even field active area (CENTER)
+ */
+ ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0);
+ ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
+
+ if (X2 > 0)
+ ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0);
+
+ ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
+/*
+ * Even field active area (BOTTOM)
+ */
+ if (Y1 > 0) {
+ ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
+ ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
+ }
+/*
+ * Vertical blanking
+ */
+ ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1);
+#endif
+
+#ifdef VIDEO_MODE_PAL
+
+#if defined(CONFIG_RRVISION)
+
+#define HPW 160 /* horizontal pulse width (was 139) */
+#define VPW 2 /* vertical pulse width */
+#define HBP 104 /* horizontal back porch (was 112) */
+#define VBP 19 /* vertical back porch (was 19) */
+#define VID_R 240 /* number of rows */
+
+ debug ("[VIDEO CTRL] Starting to add controller entries...");
+/*
+ * Even field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+/*
+ * Odd field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+
+ debug ("done\n");
+
+#else /* !CONFIG_RRVISION */
+
+/*
+ * Hx Vx Fx Bx VDS INT LCYC LP LST
+ *
+ * vertical; blanking
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
+/*
+ * active area (TOP)
+ */
+ if (Y1 > 0) {
+ ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); /* 11? */
+ ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
+ }
+/*
+ * field active area (CENTER)
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0); /* 265? */
+ ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
+
+ if (X2 > 0)
+ ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0);
+
+ ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
+/*
+ * field active area (BOTTOM)
+ */
+ if (Y2 > 0) {
+ ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); /* 12? */
+ ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
+ }
+/*
+ * field vertical; blanking
+ */
+ ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
+ ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
+/*
+ * Create the other field (like this, but whit other field selected,
+ * one more cycle loop and a last identifier)
+ */
+ video_mode_dupefield (vr, &vr[entry], entry);
+#endif /* CONFIG_RRVISION */
+
+#endif /* VIDEO_MODE_PAL */
+
+ /* See what FIFO are we using */
+ fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
+
+ /* Set number of lines and burst (only one frame for now) */
+ if (fifo) {
+ immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN |
+ (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
+ } else {
+ immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN |
+ (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
+ }
+
+ SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo);
+
+/*
+ * Wait until changes are applied (not done)
+ * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ;
+ */
+
+ /* Return number of VRAM entries */
+ return entry * 2;
+}
+
+static void video_encoder_init (void)
+{
+#ifdef VIDEO_I2C
+ int rc;
+
+ /* Initialize the I2C */
+ debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+#ifdef CONFIG_FADS
+ /* Reset ADV7176 chip */
+ debug ("[VIDEO ENCODER] Resetting encoder...\n");
+ (*(int *) BCSR4) &= ~(1 << 21);
+
+ /* Wait for 5 ms inside the reset */
+ debug ("[VIDEO ENCODER] Waiting for encoder reset...\n");
+ udelay (5000);
+
+ /* Take ADV7176 out of reset */
+ (*(int *) BCSR4) |= 1 << 21;
+
+ /* Wait for 5 ms after the reset */
+ udelay (5000);
+#endif /* CONFIG_FADS */
+
+ /* Send configuration */
+#ifdef DEBUG
+ {
+ int i;
+
+ puts ("[VIDEO ENCODER] Configuring the encoder...\n");
+
+ printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ",
+ sizeof(video_encoder_data),
+ (ulong)video_encoder_data,
+ (ulong)VIDEO_I2C_ADDR);
+ for (i=0; i<sizeof(video_encoder_data); ++i) {
+ printf(" %02X", video_encoder_data[i]);
+ }
+ putc ('\n');
+ }
+#endif /* DEBUG */
+
+ if ((rc = i2c_write (VIDEO_I2C_ADDR, 0, 1,
+ video_encoder_data,
+ sizeof(video_encoder_data))) != 0) {
+ printf ("i2c_send error: rc=%d\n", rc);
+ return;
+ }
+#endif /* VIDEO_I2C */
+ return;
+}
+
+static void video_ctrl_init (void *memptr)
+{
+ immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ video_fb_address = memptr;
+
+ /* Set background */
+ debug ("[VIDEO CTRL] Setting background color...\n");
+ immap->im_vid.vid_vbcb = VIDEO_BG_COL;
+
+ /* Show the background */
+ debug ("[VIDEO CTRL] Forcing background...\n");
+ SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1);
+
+ /* Turn off video controller */
+ debug ("[VIDEO CTRL] Turning off video controller...\n");
+ SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
+
+#ifdef CONFIG_FADS
+ /* Turn on Video Port LED */
+ debug ("[VIDEO CTRL] Turning off video port led...\n");
+ SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 1);
+
+ /* Disable internal clock */
+ debug ("[VIDEO CTRL] Disabling internal clock...\n");
+ SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 0);
+#endif
+
+ /* Generate and make active a new video mode */
+ debug ("[VIDEO CTRL] Generating video mode...\n");
+ video_mode_generate ();
+
+ /* Start of frame buffer (even and odd frame, to make it working with */
+ /* any selected active set) */
+ debug ("[VIDEO CTRL] Setting frame buffer address...\n");
+ immap->im_vid.vid_vfaa1 =
+ immap->im_vid.vid_vfaa0 = (u32) video_fb_address;
+ immap->im_vid.vid_vfba1 =
+ immap->im_vid.vid_vfba0 =
+ (u32) video_fb_address + VIDEO_LINE_LEN;
+
+ /* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */
+ debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n");
+ immap->im_vid.vid_vccr = 0x2042;
+
+ /* Configure port pins */
+ debug ("[VIDEO CTRL] Configuring input/output pins...\n");
+ immap->im_ioport.iop_pdpar = 0x1fff;
+ immap->im_ioport.iop_pddir = 0x0000;
+
+#ifdef CONFIG_FADS
+ /* Turn on Video Port Clock - ONLY AFTER SET VCCR TO ENABLE EXTERNAL CLOCK */
+ debug ("[VIDEO CTRL] Turning on video clock...\n");
+ SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 1);
+
+ /* Turn on Video Port LED */
+ debug ("[VIDEO CTRL] Turning on video port led...\n");
+ SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
+#endif
+#ifdef CONFIG_RRVISION
+ debug ("PC5->Output(1): enable PAL clock");
+ immap->im_ioport.iop_pcpar &= ~(0x0400);
+ immap->im_ioport.iop_pcdir |= 0x0400 ;
+ immap->im_ioport.iop_pcdat |= 0x0400 ;
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immap->im_ioport.iop_pdpar,
+ immap->im_ioport.iop_pddir,
+ immap->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immap->im_ioport.iop_pcpar,
+ immap->im_ioport.iop_pcdir,
+ immap->im_ioport.iop_pcdat);
+#endif /* CONFIG_RRVISION */
+
+ /* Blanking the screen. */
+ debug ("[VIDEO CTRL] Blanking the screen...\n");
+ video_fill (VIDEO_BG_COL);
+
+ /*
+ * Turns on Aggressive Mode. Normally, turning on the caches
+ * will cause the screen to flicker when the caches try to
+ * fill. This gives the FIFO's for the Video Controller
+ * higher priority and prevents flickering because of
+ * underrun. This may still be an issue when using FLASH,
+ * since accessing data from Flash is so slow.
+ */
+ debug ("[VIDEO CTRL] Turning on aggressive mode...\n");
+ immap->im_siu_conf.sc_sdcr = 0x40;
+
+ /* Turn on video controller */
+ debug ("[VIDEO CTRL] Turning on video controller...\n");
+ SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1);
+
+ /* Show the display */
+ debug ("[VIDEO CTRL] Enabling the video...\n");
+ SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0);
+}
+
+/************************************************************************/
+/* ** CONSOLE FUNCTIONS */
+/************************************************************************/
+
+static void console_scrollup (void)
+{
+ /* Copy up rows ignoring the first one */
+ memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2);
+
+ /* Clear the last one */
+ memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL);
+}
+
+static inline void console_back (void)
+{
+ console_col--;
+
+ if (console_col < 0) {
+ console_col = CONSOLE_COLS - 1;
+ console_row--;
+ if (console_row < 0)
+ console_row = 0;
+ }
+
+ video_putchar ( console_col * VIDEO_FONT_WIDTH,
+ console_row * VIDEO_FONT_HEIGHT, ' ');
+}
+
+static inline void console_newline (void)
+{
+ console_row++;
+ console_col = 0;
+
+ /* Check if we need to scroll the terminal */
+ if (console_row >= CONSOLE_ROWS) {
+ /* Scroll everything up */
+ console_scrollup ();
+
+ /* Decrement row number */
+ console_row--;
+ }
+}
+
+void video_putc (const char c)
+{
+ if (!video_enable) {
+ serial_putc (c);
+ return;
+ }
+
+ switch (c) {
+ case 13: /* Simply ignore this */
+ break;
+
+ case '\n': /* Next line, please */
+ console_newline ();
+ break;
+
+ case 9: /* Tab (8 chars alignment) */
+ console_col |= 0x0008; /* Next 8 chars boundary */
+ console_col &= ~0x0007; /* Set this bit to zero */
+
+ if (console_col >= CONSOLE_COLS)
+ console_newline ();
+ break;
+
+ case 8: /* Eat last character */
+ console_back ();
+ break;
+
+ default: /* Add to the console */
+ video_putchar ( console_col * VIDEO_FONT_WIDTH,
+ console_row * VIDEO_FONT_HEIGHT, c);
+ console_col++;
+ /* Check if we need to go to next row */
+ if (console_col >= CONSOLE_COLS)
+ console_newline ();
+ }
+}
+
+void video_puts (const char *s)
+{
+ int count = strlen (s);
+
+ if (!video_enable)
+ while (count--)
+ serial_putc (*s++);
+ else
+ while (count--)
+ video_putc (*s++);
+}
+
+/************************************************************************/
+/* ** CURSOR BLINKING FUNCTIONS */
+/************************************************************************/
+
+#ifdef VIDEO_BLINK
+
+#define BLINK_TIMER_ID 0
+#define BLINK_TIMER_HZ 2
+
+static unsigned char blink_enabled = 0;
+static timer_t blink_timer;
+
+static void blink_update (void)
+{
+ static int blink_row = -1, blink_col = -1, blink_old = 0;
+
+ /* Check if we have a new position to invert */
+ if ((console_row != blink_row) || (console_col != blink_col)) {
+ /* Check if we need to reverse last character */
+ if (blink_old)
+ video_revchar ( blink_col * VIDEO_FONT_WIDTH,
+ (blink_row
+#ifdef CONFIG_VIDEO_LOGO
+ + VIDEO_LOGO_HEIGHT
+#endif
+ ) * VIDEO_FONT_HEIGHT);
+
+ /* Update values */
+ blink_row = console_row;
+ blink_col = console_col;
+ blink_old = 0;
+ }
+
+/* Reverse this character */
+ blink_old = !blink_old;
+ video_revchar ( console_col * VIDEO_FONT_WIDTH,
+ (console_row
+#ifdef CONFIG_VIDEO_LOGO
+ + VIDEO_LOGO_HEIGHT
+#endif
+ ) * VIDEO_FONT_HEIGHT);
+
+}
+
+/*
+ * Handler for blinking cursor
+ */
+static void blink_handler (void *arg)
+{
+/* Blink */
+ blink_update ();
+/* Ack the timer */
+ timer_ack (&blink_timer);
+}
+
+int blink_set (int blink)
+{
+ int ret = blink_enabled;
+
+ if (blink)
+ timer_enable (&blink_timer);
+ else
+ timer_disable (&blink_timer);
+
+ blink_enabled = blink;
+
+ return ret;
+}
+
+static inline void blink_close (void)
+{
+ timer_close (&blink_timer);
+}
+
+static inline void blink_init (void)
+{
+ timer_init (&blink_timer,
+ BLINK_TIMER_ID, BLINK_TIMER_HZ,
+ blink_handler);
+}
+#endif
+
+/************************************************************************/
+/* ** LOGO PLOTTING FUNCTIONS */
+/************************************************************************/
+
+#ifdef CONFIG_VIDEO_LOGO
+void easylogo_plot (fastimage_t * image, void *screen, int width, int x,
+ int y)
+{
+ int skip = width - image->width, xcount, ycount = image->height;
+
+#ifdef VIDEO_MODE_YUYV
+ ushort *source = (ushort *) image->data;
+ ushort *dest = (ushort *) screen + y * width + x;
+
+ while (ycount--) {
+ xcount = image->width;
+ while (xcount--)
+ *dest++ = *source++;
+ dest += skip;
+ }
+#endif
+#ifdef VIDEO_MODE_RGB
+ unsigned char
+ *source = (unsigned short *) image->data,
+ *dest = (unsigned short *) screen + ((y * width) + x) * 3;
+
+ while (ycount--) {
+ xcount = image->width * 3;
+ memcpy (dest, source, xcount);
+ source += xcount;
+ dest += ycount;
+ }
+#endif
+}
+
+static void *video_logo (void)
+{
+ u16 *screen = video_fb_address, width = VIDEO_COLS;
+#ifdef VIDEO_INFO
+# ifndef CONFIG_FADS
+ char temp[32];
+# endif
+ char info[80];
+#endif /* VIDEO_INFO */
+
+ easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
+
+#ifdef VIDEO_INFO
+ sprintf (info, "%s (%s - %s) ",
+ U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
+
+ sprintf (info, "(C) 2002 DENX Software Engineering");
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
+ info);
+
+ sprintf (info, " Wolfgang DENK, wd@denx.de");
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
+ info);
+#ifndef CONFIG_FADS /* all normal boards */
+ /* leave one blank line */
+
+ sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
+ strmhz(temp, gd->cpu_clk),
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
+ info);
+#else /* FADS :-( */
+ sprintf (info, "MPC823 CPU at 50 MHz on FADS823 board");
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
+ info);
+
+ sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
+ video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
+ info);
+#endif
+#endif
+
+ return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;
+}
+#endif
+
+/************************************************************************/
+/* ** VIDEO HIGH-LEVEL FUNCTIONS */
+/************************************************************************/
+
+static int video_init (void *videobase)
+{
+ /* Initialize the encoder */
+ debug ("[VIDEO] Initializing video encoder...\n");
+ video_encoder_init ();
+
+ /* Initialize the video controller */
+ debug ("[VIDEO] Initializing video controller at %08x...\n",
+ (int) videobase);
+ video_ctrl_init (videobase);
+
+ /* Setting the palette */
+ video_setpalette (CONSOLE_COLOR_BLACK, 0, 0, 0);
+ video_setpalette (CONSOLE_COLOR_RED, 0xFF, 0, 0);
+ video_setpalette (CONSOLE_COLOR_GREEN, 0, 0xFF, 0);
+ video_setpalette (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0);
+ video_setpalette (CONSOLE_COLOR_BLUE, 0, 0, 0xFF);
+ video_setpalette (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF);
+ video_setpalette (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF);
+ video_setpalette (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA);
+ video_setpalette (CONSOLE_COLOR_GREY2, 0xF8, 0xF8, 0xF8);
+ video_setpalette (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF);
+
+#ifndef CONFIG_SYS_WHITE_ON_BLACK
+ video_setfgcolor (CONSOLE_COLOR_BLACK);
+ video_setbgcolor (CONSOLE_COLOR_GREY2);
+#else
+ video_setfgcolor (CONSOLE_COLOR_GREY2);
+ video_setbgcolor (CONSOLE_COLOR_BLACK);
+#endif /* CONFIG_SYS_WHITE_ON_BLACK */
+
+#ifdef CONFIG_VIDEO_LOGO
+ /* Paint the logo and retrieve tv base address */
+ debug ("[VIDEO] Drawing the logo...\n");
+ video_console_address = video_logo ();
+#else
+ video_console_address = video_fb_address;
+#endif
+
+#ifdef VIDEO_BLINK
+ /* Enable the blinking (under construction) */
+ blink_init ();
+ blink_set (0); /* To Fix! */
+#endif
+
+ /* Initialize the console */
+ console_col = 0;
+ console_row = 0;
+ video_enable = 1;
+
+#ifdef VIDEO_MODE_PAL
+# define VIDEO_MODE_TMP1 "PAL"
+#endif
+#ifdef VIDEO_MODE_NTSC
+# define VIDEO_MODE_TMP1 "NTSC"
+#endif
+#ifdef VIDEO_MODE_YUYV
+# define VIDEO_MODE_TMP2 "YCbYCr"
+#endif
+#ifdef VIDEO_MODE_RGB
+# define VIDEO_MODE_TMP2 "RGB"
+#endif
+ debug ( VIDEO_MODE_TMP1
+ " %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n",
+ VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP,
+ VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS);
+ return 0;
+}
+
+int drv_video_init (void)
+{
+ int error, devices = 1;
+
+ struct stdio_dev videodev;
+
+ video_init ((void *)(gd->fb_base)); /* Video initialization */
+
+/* Device initialization */
+
+ memset (&videodev, 0, sizeof (videodev));
+
+ strcpy (videodev.name, "video");
+ videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
+ videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */
+ videodev.putc = video_putc; /* 'putc' function */
+ videodev.puts = video_puts; /* 'puts' function */
+
+ error = stdio_register (&videodev);
+
+ return (error == 0) ? devices : error;
+}
+
+/************************************************************************/
+/* ** ROM capable initialization part - needed to reserve FB memory */
+/************************************************************************/
+
+/*
+ * This is called early in the system initialization to grab memory
+ * for the video controller.
+ * Returns new address for monitor, after reserving video buffer memory
+ *
+ * Note that this is running from ROM, so no write access to global data.
+ */
+ulong video_setmem (ulong addr)
+{
+ /* Allocate pages for the frame buffer. */
+ addr -= VIDEO_SIZE;
+
+ debug ("Reserving %dk for Video Framebuffer at: %08lx\n",
+ VIDEO_SIZE>>10, addr);
+
+ return (addr);
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+
+#ifdef CONFIG_WL_4PPM_KEYBOARD
+
+/* WIP: Wireless keyboard on SMC
+ */
+int drv_wlkbd_init (void)
+{
+ return 0 ;
+}
+
+#endif /* CONFIG_WL_4PPM_KEYBOARD */
--- /dev/null
+#
+# Copyright 2009 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# Version 2 as published by the Free Software Foundation.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib8xxx.a
+
+COBJS-y += cpu.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_PCI) += pci_cfg.o
+
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
--- /dev/null
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * cpu specific common code for 85xx/86xx processors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct cpu_type cpu_type_list [] = {
+#if defined(CONFIG_MPC85xx)
+ CPU_TYPE_ENTRY(8533, 8533, 1),
+ CPU_TYPE_ENTRY(8533, 8533_E, 1),
+ CPU_TYPE_ENTRY(8535, 8535, 1),
+ CPU_TYPE_ENTRY(8535, 8535_E, 1),
+ CPU_TYPE_ENTRY(8536, 8536, 1),
+ CPU_TYPE_ENTRY(8536, 8536_E, 1),
+ CPU_TYPE_ENTRY(8540, 8540, 1),
+ CPU_TYPE_ENTRY(8541, 8541, 1),
+ CPU_TYPE_ENTRY(8541, 8541_E, 1),
+ CPU_TYPE_ENTRY(8543, 8543, 1),
+ CPU_TYPE_ENTRY(8543, 8543_E, 1),
+ CPU_TYPE_ENTRY(8544, 8544, 1),
+ CPU_TYPE_ENTRY(8544, 8544_E, 1),
+ CPU_TYPE_ENTRY(8545, 8545, 1),
+ CPU_TYPE_ENTRY(8545, 8545_E, 1),
+ CPU_TYPE_ENTRY(8547, 8547_E, 1),
+ CPU_TYPE_ENTRY(8548, 8548, 1),
+ CPU_TYPE_ENTRY(8548, 8548_E, 1),
+ CPU_TYPE_ENTRY(8555, 8555, 1),
+ CPU_TYPE_ENTRY(8555, 8555_E, 1),
+ CPU_TYPE_ENTRY(8560, 8560, 1),
+ CPU_TYPE_ENTRY(8567, 8567, 1),
+ CPU_TYPE_ENTRY(8567, 8567_E, 1),
+ CPU_TYPE_ENTRY(8568, 8568, 1),
+ CPU_TYPE_ENTRY(8568, 8568_E, 1),
+ CPU_TYPE_ENTRY(8569, 8569, 1),
+ CPU_TYPE_ENTRY(8569, 8569_E, 1),
+ CPU_TYPE_ENTRY(8572, 8572, 2),
+ CPU_TYPE_ENTRY(8572, 8572_E, 2),
+ CPU_TYPE_ENTRY(P1011, P1011, 1),
+ CPU_TYPE_ENTRY(P1011, P1011_E, 1),
+ CPU_TYPE_ENTRY(P1012, P1012, 1),
+ CPU_TYPE_ENTRY(P1012, P1012_E, 1),
+ CPU_TYPE_ENTRY(P1013, P1013, 1),
+ CPU_TYPE_ENTRY(P1013, P1013_E, 1),
+ CPU_TYPE_ENTRY(P1020, P1020, 2),
+ CPU_TYPE_ENTRY(P1020, P1020_E, 2),
+ CPU_TYPE_ENTRY(P1021, P1021, 2),
+ CPU_TYPE_ENTRY(P1021, P1021_E, 2),
+ CPU_TYPE_ENTRY(P1022, P1022, 2),
+ CPU_TYPE_ENTRY(P1022, P1022_E, 2),
+ CPU_TYPE_ENTRY(P2010, P2010, 1),
+ CPU_TYPE_ENTRY(P2010, P2010_E, 1),
+ CPU_TYPE_ENTRY(P2020, P2020, 2),
+ CPU_TYPE_ENTRY(P2020, P2020_E, 2),
+ CPU_TYPE_ENTRY(P4040, P4040, 4),
+ CPU_TYPE_ENTRY(P4040, P4040_E, 4),
+ CPU_TYPE_ENTRY(P4080, P4080, 8),
+ CPU_TYPE_ENTRY(P4080, P4080_E, 8),
+#elif defined(CONFIG_MPC86xx)
+ CPU_TYPE_ENTRY(8610, 8610, 1),
+ CPU_TYPE_ENTRY(8641, 8641, 2),
+ CPU_TYPE_ENTRY(8641D, 8641D, 2),
+#endif
+};
+
+struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 1);
+
+struct cpu_type *identify_cpu(u32 ver)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) {
+ if (cpu_type_list[i].soc_ver == ver)
+ return &cpu_type_list[i];
+ }
+ return &cpu_type_unknown;
+}
+
+int cpu_numcores() {
+ struct cpu_type *cpu;
+ cpu = gd->cpu;
+ return cpu->num_cores;
+}
+
+int probecpu (void)
+{
+ uint svr;
+ uint ver;
+
+ svr = get_svr();
+ ver = SVR_SOC_VER(svr);
+
+ gd->cpu = identify_cpu(ver);
+
+ return 0;
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_ETHER_ON_FCC)
+ fec_initialize(bis);
+#endif
+
+#if defined(CONFIG_UEC_ETH)
+ uec_standard_init(bis);
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
+ tsec_standard_init(bis);
+#endif
+
+ return 0;
+}
--- /dev/null
+#
+# Copyright 2008 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# Version 2 as published by the Free Software Foundation.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libddr.a
+
+COBJS-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
+ lc_common_dimm_params.o
+COBJS-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o
+
+COBJS-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \
+ lc_common_dimm_params.o
+COBJS-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o
+
+COBJS-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \
+ lc_common_dimm_params.o
+COBJS-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o
+
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef COMMON_TIMING_PARAMS_H
+#define COMMON_TIMING_PARAMS_H
+
+typedef struct {
+ /* parameters to constrict */
+
+ unsigned int tCKmin_X_ps;
+ unsigned int tCKmax_ps;
+ unsigned int tCKmax_max_ps;
+ unsigned int tRCD_ps;
+ unsigned int tRP_ps;
+ unsigned int tRAS_ps;
+
+ unsigned int tWR_ps; /* maximum = 63750 ps */
+ unsigned int tWTR_ps; /* maximum = 63750 ps */
+ unsigned int tRFC_ps; /* maximum = 255 ns + 256 ns + .75 ns
+ = 511750 ps */
+
+ unsigned int tRRD_ps; /* maximum = 63750 ps */
+ unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
+
+ unsigned int refresh_rate_ps;
+
+ unsigned int tIS_ps; /* byte 32, spd->ca_setup */
+ unsigned int tIH_ps; /* byte 33, spd->ca_hold */
+ unsigned int tDS_ps; /* byte 34, spd->data_setup */
+ unsigned int tDH_ps; /* byte 35, spd->data_hold */
+ unsigned int tRTP_ps; /* byte 38, spd->trtp */
+ unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
+ unsigned int tQHS_ps; /* byte 45, spd->tqhs */
+
+ unsigned int ndimms_present;
+ unsigned int lowest_common_SPD_caslat;
+ unsigned int highest_common_derated_caslat;
+ unsigned int additive_latency;
+ unsigned int all_DIMMs_burst_lengths_bitmask;
+ unsigned int all_DIMMs_registered;
+ unsigned int all_DIMMs_unbuffered;
+ unsigned int all_DIMMs_ECC_capable;
+
+ unsigned long long total_mem;
+ unsigned long long base_address;
+} common_timing_params_t;
+
+#endif
--- /dev/null
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+extern unsigned int picos_to_mclk(unsigned int picos);
+/*
+ * Determine Rtt value.
+ *
+ * This should likely be either board or controller specific.
+ *
+ * Rtt(nominal) - DDR2:
+ * 0 = Rtt disabled
+ * 1 = 75 ohm
+ * 2 = 150 ohm
+ * 3 = 50 ohm
+ * Rtt(nominal) - DDR3:
+ * 0 = Rtt disabled
+ * 1 = 60 ohm
+ * 2 = 120 ohm
+ * 3 = 40 ohm
+ * 4 = 20 ohm
+ * 5 = 30 ohm
+ *
+ * FIXME: Apparently 8641 needs a value of 2
+ * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
+ *
+ * FIXME: There was some effort down this line earlier:
+ *
+ * unsigned int i;
+ * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
+ * if (popts->dimmslot[i].num_valid_cs
+ * && (popts->cs_local_opts[2*i].odt_rd_cfg
+ * || popts->cs_local_opts[2*i].odt_wr_cfg)) {
+ * rtt = 2;
+ * break;
+ * }
+ * }
+ */
+static inline int fsl_ddr_get_rtt(void)
+{
+ int rtt;
+
+#if defined(CONFIG_FSL_DDR1)
+ rtt = 0;
+#elif defined(CONFIG_FSL_DDR2)
+ rtt = 3;
+#else
+ rtt = 0;
+#endif
+
+ return rtt;
+}
+
+/*
+ * compute the CAS write latency according to DDR3 spec
+ * CWL = 5 if tCK >= 2.5ns
+ * 6 if 2.5ns > tCK >= 1.875ns
+ * 7 if 1.875ns > tCK >= 1.5ns
+ * 8 if 1.5ns > tCK >= 1.25ns
+ */
+static inline unsigned int compute_cas_write_latency(void)
+{
+ unsigned int cwl;
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+
+ if (mclk_ps >= 2500)
+ cwl = 5;
+ else if (mclk_ps >= 1875)
+ cwl = 6;
+ else if (mclk_ps >= 1500)
+ cwl = 7;
+ else if (mclk_ps >= 1250)
+ cwl = 8;
+ else
+ cwl = 8;
+ return cwl;
+}
+
+/* Chip Select Configuration (CSn_CONFIG) */
+static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
+{
+ unsigned int cs_n_en = 0; /* Chip Select enable */
+ unsigned int intlv_en = 0; /* Memory controller interleave enable */
+ unsigned int intlv_ctl = 0; /* Interleaving control */
+ unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
+ unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
+ unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
+ unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
+ unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
+ unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
+
+ /* Compute CS_CONFIG only for existing ranks of each DIMM. */
+ if ((((i&1) == 0)
+ && (dimm_params[i/2].n_ranks == 1))
+ || (dimm_params[i/2].n_ranks == 2)) {
+ unsigned int n_banks_per_sdram_device;
+ cs_n_en = 1;
+ if (i == 0) {
+ /* These fields only available in CS0_CONFIG */
+ intlv_en = popts->memctl_interleaving;
+ intlv_ctl = popts->memctl_interleaving_mode;
+ }
+ ap_n_en = popts->cs_local_opts[i].auto_precharge;
+ odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
+ odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
+ n_banks_per_sdram_device
+ = dimm_params[i/2].n_banks_per_sdram_device;
+ ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
+ row_bits_cs_n = dimm_params[i/2].n_row_addr - 12;
+ col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
+ }
+
+ ddr->cs[i].config = (0
+ | ((cs_n_en & 0x1) << 31)
+ | ((intlv_en & 0x3) << 29)
+ | ((intlv_ctl & 0xf) << 24)
+ | ((ap_n_en & 0x1) << 23)
+
+ /* XXX: some implementation only have 1 bit starting at left */
+ | ((odt_rd_cfg & 0x7) << 20)
+
+ /* XXX: Some implementation only have 1 bit starting at left */
+ | ((odt_wr_cfg & 0x7) << 16)
+
+ | ((ba_bits_cs_n & 0x3) << 14)
+ | ((row_bits_cs_n & 0x7) << 8)
+ | ((col_bits_cs_n & 0x7) << 0)
+ );
+ debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
+}
+
+/* Chip Select Configuration 2 (CSn_CONFIG_2) */
+/* FIXME: 8572 */
+static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int pasr_cfg = 0; /* Partial array self refresh config */
+
+ ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
+ debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
+}
+
+/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
+
+#if !defined(CONFIG_FSL_DDR1)
+/*
+ * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
+ *
+ * Avoid writing for DDR I. The new PQ38 DDR controller
+ * dreams up non-zero default values to be backwards compatible.
+ */
+static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
+ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
+ /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
+ unsigned char trrt_mclk = 0; /* Read-to-read turnaround */
+ unsigned char twwt_mclk = 0; /* Write-to-write turnaround */
+
+ /* Active powerdown exit timing (tXARD and tXARDS). */
+ unsigned char act_pd_exit_mclk;
+ /* Precharge powerdown exit timing (tXP). */
+ unsigned char pre_pd_exit_mclk;
+ /* Precharge powerdown exit timing (tAXPD). */
+ unsigned char taxpd_mclk;
+ /* Mode register set cycle time (tMRD). */
+ unsigned char tmrd_mclk;
+
+#if defined(CONFIG_FSL_DDR3)
+ /*
+ * (tXARD and tXARDS). Empirical?
+ * The DDR3 spec has not tXARD,
+ * we use the tXP instead of it.
+ * tXP=max(3nCK, 7.5ns) for DDR3.
+ * spec has not the tAXPD, we use
+ * tAXPD=8, need design to confirm.
+ */
+ int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
+ act_pd_exit_mclk = picos_to_mclk(tXP);
+ /* Mode register MR0[A12] is '1' - fast exit */
+ pre_pd_exit_mclk = act_pd_exit_mclk;
+ taxpd_mclk = 8;
+ tmrd_mclk = 4;
+#else /* CONFIG_FSL_DDR2 */
+ /*
+ * (tXARD and tXARDS). Empirical?
+ * tXARD = 2 for DDR2
+ * tXP=2
+ * tAXPD=8
+ */
+ act_pd_exit_mclk = 2;
+ pre_pd_exit_mclk = 2;
+ taxpd_mclk = 8;
+ tmrd_mclk = 2;
+#endif
+
+ ddr->timing_cfg_0 = (0
+ | ((trwt_mclk & 0x3) << 30) /* RWT */
+ | ((twrt_mclk & 0x3) << 28) /* WRT */
+ | ((trrt_mclk & 0x3) << 26) /* RRT */
+ | ((twwt_mclk & 0x3) << 24) /* WWT */
+ | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */
+ | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */
+ | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */
+ | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */
+ );
+ debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+}
+#endif /* defined(CONFIG_FSL_DDR2) */
+
+/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
+static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency)
+{
+ /* Extended Activate to precharge interval (tRAS) */
+ unsigned int ext_acttopre = 0;
+ unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */
+ unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
+ unsigned int cntl_adj = 0; /* Control Adjust */
+
+ /* If the tRAS > 19 MCLK, we use the ext mode */
+ if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13)
+ ext_acttopre = 1;
+
+ ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
+
+ /* If the CAS latency more than 8, use the ext mode */
+ if (cas_latency > 8)
+ ext_caslat = 1;
+
+ ddr->timing_cfg_3 = (0
+ | ((ext_acttopre & 0x1) << 24)
+ | ((ext_refrec & 0xF) << 16)
+ | ((ext_caslat & 0x1) << 12)
+ | ((cntl_adj & 0x7) << 0)
+ );
+ debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
+}
+
+/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
+static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency)
+{
+ /* Precharge-to-activate interval (tRP) */
+ unsigned char pretoact_mclk;
+ /* Activate to precharge interval (tRAS) */
+ unsigned char acttopre_mclk;
+ /* Activate to read/write interval (tRCD) */
+ unsigned char acttorw_mclk;
+ /* CASLAT */
+ unsigned char caslat_ctrl;
+ /* Refresh recovery time (tRFC) ; trfc_low */
+ unsigned char refrec_ctrl;
+ /* Last data to precharge minimum interval (tWR) */
+ unsigned char wrrec_mclk;
+ /* Activate-to-activate interval (tRRD) */
+ unsigned char acttoact_mclk;
+ /* Last write data pair to read command issue interval (tWTR) */
+ unsigned char wrtord_mclk;
+
+ pretoact_mclk = picos_to_mclk(common_dimm->tRP_ps);
+ acttopre_mclk = picos_to_mclk(common_dimm->tRAS_ps);
+ acttorw_mclk = picos_to_mclk(common_dimm->tRCD_ps);
+
+ /*
+ * Translate CAS Latency to a DDR controller field value:
+ *
+ * CAS Lat DDR I DDR II Ctrl
+ * Clocks SPD Bit SPD Bit Value
+ * ------- ------- ------- -----
+ * 1.0 0 0001
+ * 1.5 1 0010
+ * 2.0 2 2 0011
+ * 2.5 3 0100
+ * 3.0 4 3 0101
+ * 3.5 5 0110
+ * 4.0 4 0111
+ * 4.5 1000
+ * 5.0 5 1001
+ */
+#if defined(CONFIG_FSL_DDR1)
+ caslat_ctrl = (cas_latency + 1) & 0x07;
+#elif defined(CONFIG_FSL_DDR2)
+ caslat_ctrl = 2 * cas_latency - 1;
+#else
+ /*
+ * if the CAS latency more than 8 cycle,
+ * we need set extend bit for it at
+ * TIMING_CFG_3[EXT_CASLAT]
+ */
+ if (cas_latency > 8)
+ cas_latency -= 8;
+ caslat_ctrl = 2 * cas_latency - 1;
+#endif
+
+ refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8;
+ wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps);
+ if (popts->OTF_burst_chop_en)
+ wrrec_mclk += 2;
+
+ acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps);
+ /*
+ * JEDEC has min requirement for tRRD
+ */
+#if defined(CONFIG_FSL_DDR3)
+ if (acttoact_mclk < 4)
+ acttoact_mclk = 4;
+#endif
+ wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps);
+ /*
+ * JEDEC has some min requirements for tWTR
+ */
+#if defined(CONFIG_FSL_DDR2)
+ if (wrtord_mclk < 2)
+ wrtord_mclk = 2;
+#elif defined(CONFIG_FSL_DDR3)
+ if (wrtord_mclk < 4)
+ wrtord_mclk = 4;
+#endif
+ if (popts->OTF_burst_chop_en)
+ wrtord_mclk += 2;
+
+ ddr->timing_cfg_1 = (0
+ | ((pretoact_mclk & 0x0F) << 28)
+ | ((acttopre_mclk & 0x0F) << 24)
+ | ((acttorw_mclk & 0xF) << 20)
+ | ((caslat_ctrl & 0xF) << 16)
+ | ((refrec_ctrl & 0xF) << 12)
+ | ((wrrec_mclk & 0x0F) << 8)
+ | ((acttoact_mclk & 0x07) << 4)
+ | ((wrtord_mclk & 0x07) << 0)
+ );
+ debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
+}
+
+/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
+static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
+{
+ /* Additive latency */
+ unsigned char add_lat_mclk;
+ /* CAS-to-preamble override */
+ unsigned short cpo;
+ /* Write latency */
+ unsigned char wr_lat;
+ /* Read to precharge (tRTP) */
+ unsigned char rd_to_pre;
+ /* Write command to write data strobe timing adjustment */
+ unsigned char wr_data_delay;
+ /* Minimum CKE pulse width (tCKE) */
+ unsigned char cke_pls;
+ /* Window for four activates (tFAW) */
+ unsigned short four_act;
+
+ /* FIXME add check that this must be less than acttorw_mclk */
+ add_lat_mclk = additive_latency;
+ cpo = popts->cpo_override;
+
+#if defined(CONFIG_FSL_DDR1)
+ /*
+ * This is a lie. It should really be 1, but if it is
+ * set to 1, bits overlap into the old controller's
+ * otherwise unused ACSM field. If we leave it 0, then
+ * the HW will magically treat it as 1 for DDR 1. Oh Yea.
+ */
+ wr_lat = 0;
+#elif defined(CONFIG_FSL_DDR2)
+ wr_lat = cas_latency - 1;
+#else
+ wr_lat = compute_cas_write_latency();
+#endif
+
+ rd_to_pre = picos_to_mclk(common_dimm->tRTP_ps);
+ /*
+ * JEDEC has some min requirements for tRTP
+ */
+#if defined(CONFIG_FSL_DDR2)
+ if (rd_to_pre < 2)
+ rd_to_pre = 2;
+#elif defined(CONFIG_FSL_DDR3)
+ if (rd_to_pre < 4)
+ rd_to_pre = 4;
+#endif
+ if (additive_latency)
+ rd_to_pre += additive_latency;
+ if (popts->OTF_burst_chop_en)
+ rd_to_pre += 2; /* according to UM */
+
+ wr_data_delay = popts->write_data_delay;
+ cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
+ four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
+
+ ddr->timing_cfg_2 = (0
+ | ((add_lat_mclk & 0xf) << 28)
+ | ((cpo & 0x1f) << 23)
+ | ((wr_lat & 0xf) << 19)
+ | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT)
+ | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT)
+ | ((cke_pls & 0x7) << 6)
+ | ((four_act & 0x3f) << 0)
+ );
+ debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
+}
+
+/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
+static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
+{
+ unsigned int mem_en; /* DDR SDRAM interface logic enable */
+ unsigned int sren; /* Self refresh enable (during sleep) */
+ unsigned int ecc_en; /* ECC enable. */
+ unsigned int rd_en; /* Registered DIMM enable */
+ unsigned int sdram_type; /* Type of SDRAM */
+ unsigned int dyn_pwr; /* Dynamic power management mode */
+ unsigned int dbw; /* DRAM dta bus width */
+ unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */
+ unsigned int ncap = 0; /* Non-concurrent auto-precharge */
+ unsigned int threeT_en; /* Enable 3T timing */
+ unsigned int twoT_en; /* Enable 2T timing */
+ unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */
+ unsigned int x32_en = 0; /* x32 enable */
+ unsigned int pchb8 = 0; /* precharge bit 8 enable */
+ unsigned int hse; /* Global half strength override */
+ unsigned int mem_halt = 0; /* memory controller halt */
+ unsigned int bi = 0; /* Bypass initialization */
+
+ mem_en = 1;
+ sren = popts->self_refresh_in_sleep;
+ if (common_dimm->all_DIMMs_ECC_capable) {
+ /* Allow setting of ECC only if all DIMMs are ECC. */
+ ecc_en = popts->ECC_mode;
+ } else {
+ ecc_en = 0;
+ }
+
+ rd_en = (common_dimm->all_DIMMs_registered
+ && !common_dimm->all_DIMMs_unbuffered);
+
+ sdram_type = CONFIG_FSL_SDRAM_TYPE;
+
+ dyn_pwr = popts->dynamic_power;
+ dbw = popts->data_bus_width;
+ /* 8-beat burst enable DDR-III case
+ * we must clear it when use the on-the-fly mode,
+ * must set it when use the 32-bits bus mode.
+ */
+ if (sdram_type == SDRAM_TYPE_DDR3) {
+ if (popts->burst_length == DDR_BL8)
+ eight_be = 1;
+ if (popts->burst_length == DDR_OTF)
+ eight_be = 0;
+ if (dbw == 0x1)
+ eight_be = 1;
+ }
+
+ threeT_en = popts->threeT_en;
+ twoT_en = popts->twoT_en;
+ ba_intlv_ctl = popts->ba_intlv_ctl;
+ hse = popts->half_strength_driver_enable;
+
+ ddr->ddr_sdram_cfg = (0
+ | ((mem_en & 0x1) << 31)
+ | ((sren & 0x1) << 30)
+ | ((ecc_en & 0x1) << 29)
+ | ((rd_en & 0x1) << 28)
+ | ((sdram_type & 0x7) << 24)
+ | ((dyn_pwr & 0x1) << 21)
+ | ((dbw & 0x3) << 19)
+ | ((eight_be & 0x1) << 18)
+ | ((ncap & 0x1) << 17)
+ | ((threeT_en & 0x1) << 16)
+ | ((twoT_en & 0x1) << 15)
+ | ((ba_intlv_ctl & 0x7F) << 8)
+ | ((x32_en & 0x1) << 5)
+ | ((pchb8 & 0x1) << 4)
+ | ((hse & 0x1) << 3)
+ | ((mem_halt & 0x1) << 1)
+ | ((bi & 0x1) << 0)
+ );
+ debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
+}
+
+/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
+static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned int frc_sr = 0; /* Force self refresh */
+ unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
+ unsigned int dll_rst_dis; /* DLL reset disable */
+ unsigned int dqs_cfg; /* DQS configuration */
+ unsigned int odt_cfg; /* ODT configuration */
+ unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
+ unsigned int ap_en; /* Address Parity Enable */
+ unsigned int d_init; /* DRAM data initialization */
+ unsigned int rcw_en = 0; /* Register Control Word Enable */
+ unsigned int md_en = 0; /* Mirrored DIMM Enable */
+
+ dll_rst_dis = 1; /* Make this configurable */
+ dqs_cfg = popts->DQS_config;
+ if (popts->cs_local_opts[0].odt_rd_cfg
+ || popts->cs_local_opts[0].odt_wr_cfg) {
+ /* FIXME */
+ odt_cfg = 2;
+ } else {
+ odt_cfg = 0;
+ }
+
+ num_pr = 1; /* Make this configurable */
+
+ /*
+ * 8572 manual says
+ * {TIMING_CFG_1[PRETOACT]
+ * + [DDR_SDRAM_CFG_2[NUM_PR]
+ * * ({EXT_REFREC || REFREC} + 8 + 2)]}
+ * << DDR_SDRAM_INTERVAL[REFINT]
+ */
+#if defined(CONFIG_FSL_DDR3)
+ obc_cfg = popts->OTF_burst_chop_en;
+#else
+ obc_cfg = 0;
+#endif
+
+ ap_en = 0; /* Make this configurable? */
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /* Use the DDR controller to auto initialize memory. */
+ d_init = 1;
+ ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
+ debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
+#else
+ /* Memory will be initialized via DMA, or not at all. */
+ d_init = 0;
+#endif
+
+#if defined(CONFIG_FSL_DDR3)
+ md_en = popts->mirrored_dimm;
+#endif
+ ddr->ddr_sdram_cfg_2 = (0
+ | ((frc_sr & 0x1) << 31)
+ | ((sr_ie & 0x1) << 30)
+ | ((dll_rst_dis & 0x1) << 29)
+ | ((dqs_cfg & 0x3) << 26)
+ | ((odt_cfg & 0x3) << 21)
+ | ((num_pr & 0xf) << 12)
+ | ((obc_cfg & 0x1) << 6)
+ | ((ap_en & 0x1) << 5)
+ | ((d_init & 0x1) << 4)
+ | ((rcw_en & 0x1) << 2)
+ | ((md_en & 0x1) << 0)
+ );
+ debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
+}
+
+/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
+static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
+ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
+
+#if defined(CONFIG_FSL_DDR3)
+ unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
+ unsigned int srt = 0; /* self-refresh temerature, normal range */
+ unsigned int asr = 0; /* auto self-refresh disable */
+ unsigned int cwl = compute_cas_write_latency() - 5;
+ unsigned int pasr = 0; /* partial array self refresh disable */
+
+ if (popts->rtt_override)
+ rtt_wr = popts->rtt_wr_override_value;
+
+ esdmode2 = (0
+ | ((rtt_wr & 0x3) << 9)
+ | ((srt & 0x1) << 7)
+ | ((asr & 0x1) << 6)
+ | ((cwl & 0x7) << 3)
+ | ((pasr & 0x7) << 0));
+#endif
+ ddr->ddr_sdram_mode_2 = (0
+ | ((esdmode2 & 0xFFFF) << 16)
+ | ((esdmode3 & 0xFFFF) << 0)
+ );
+ debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
+}
+
+/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
+static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
+{
+ unsigned int refint; /* Refresh interval */
+ unsigned int bstopre; /* Precharge interval */
+
+ refint = picos_to_mclk(common_dimm->refresh_rate_ps);
+
+ bstopre = popts->bstopre;
+
+ /* refint field used 0x3FFF in earlier controllers */
+ ddr->ddr_sdram_interval = (0
+ | ((refint & 0xFFFF) << 16)
+ | ((bstopre & 0x3FFF) << 0)
+ );
+ debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
+}
+
+#if defined(CONFIG_FSL_DDR3)
+/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
+static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
+{
+ unsigned short esdmode; /* Extended SDRAM mode */
+ unsigned short sdmode; /* SDRAM mode */
+
+ /* Mode Register - MR1 */
+ unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */
+ unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */
+ unsigned int rtt;
+ unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */
+ unsigned int al = 0; /* Posted CAS# additive latency (AL) */
+ unsigned int dic = 1; /* Output driver impedance, 34ohm */
+ unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
+ 1=Disable (Test/Debug) */
+
+ /* Mode Register - MR0 */
+ unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */
+ unsigned int wr; /* Write Recovery */
+ unsigned int dll_rst; /* DLL Reset */
+ unsigned int mode; /* Normal=0 or Test=1 */
+ unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
+ /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
+ unsigned int bt;
+ unsigned int bl; /* BL: Burst Length */
+
+ unsigned int wr_mclk;
+
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+
+ rtt = fsl_ddr_get_rtt();
+ if (popts->rtt_override)
+ rtt = popts->rtt_override_value;
+
+ if (additive_latency == (cas_latency - 1))
+ al = 1;
+ if (additive_latency == (cas_latency - 2))
+ al = 2;
+
+ /*
+ * The esdmode value will also be used for writing
+ * MR1 during write leveling for DDR3, although the
+ * bits specifically related to the write leveling
+ * scheme will be handled automatically by the DDR
+ * controller. so we set the wrlvl_en = 0 here.
+ */
+ esdmode = (0
+ | ((qoff & 0x1) << 12)
+ | ((tdqs_en & 0x1) << 11)
+ | ((rtt & 0x4) << 7) /* rtt field is split */
+ | ((wrlvl_en & 0x1) << 7)
+ | ((rtt & 0x2) << 5) /* rtt field is split */
+ | ((dic & 0x2) << 4) /* DIC field is split */
+ | ((al & 0x3) << 3)
+ | ((rtt & 0x1) << 2) /* rtt field is split */
+ | ((dic & 0x1) << 1) /* DIC field is split */
+ | ((dll_en & 0x1) << 0)
+ );
+
+ /*
+ * DLL control for precharge PD
+ * 0=slow exit DLL off (tXPDLL)
+ * 1=fast exit DLL on (tXP)
+ */
+ dll_on = 1;
+ wr_mclk = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps;
+ if (wr_mclk >= 12)
+ wr = 6;
+ else if (wr_mclk >= 9)
+ wr = 5;
+ else
+ wr = wr_mclk - 4;
+ dll_rst = 0; /* dll no reset */
+ mode = 0; /* normal mode */
+
+ /* look up table to get the cas latency bits */
+ if (cas_latency >= 5 && cas_latency <= 11) {
+ unsigned char cas_latency_table[7] = {
+ 0x2, /* 5 clocks */
+ 0x4, /* 6 clocks */
+ 0x6, /* 7 clocks */
+ 0x8, /* 8 clocks */
+ 0xa, /* 9 clocks */
+ 0xc, /* 10 clocks */
+ 0xe /* 11 clocks */
+ };
+ caslat = cas_latency_table[cas_latency - 5];
+ }
+ bt = 0; /* Nibble sequential */
+
+ switch (popts->burst_length) {
+ case DDR_BL8:
+ bl = 0;
+ break;
+ case DDR_OTF:
+ bl = 1;
+ break;
+ case DDR_BC4:
+ bl = 2;
+ break;
+ default:
+ printf("Error: invalid burst length of %u specified. "
+ " Defaulting to on-the-fly BC4 or BL8 beats.\n",
+ popts->burst_length);
+ bl = 1;
+ break;
+ }
+
+ sdmode = (0
+ | ((dll_on & 0x1) << 12)
+ | ((wr & 0x7) << 9)
+ | ((dll_rst & 0x1) << 8)
+ | ((mode & 0x1) << 7)
+ | (((caslat >> 1) & 0x7) << 4)
+ | ((bt & 0x1) << 3)
+ | ((bl & 0x3) << 0)
+ );
+
+ ddr->ddr_sdram_mode = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+
+ debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
+}
+
+#else /* !CONFIG_FSL_DDR3 */
+
+/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
+static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
+{
+ unsigned short esdmode; /* Extended SDRAM mode */
+ unsigned short sdmode; /* SDRAM mode */
+
+ /*
+ * FIXME: This ought to be pre-calculated in a
+ * technology-specific routine,
+ * e.g. compute_DDR2_mode_register(), and then the
+ * sdmode and esdmode passed in as part of common_dimm.
+ */
+
+ /* Extended Mode Register */
+ unsigned int mrs = 0; /* Mode Register Set */
+ unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */
+ unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */
+ unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */
+ unsigned int ocd = 0; /* 0x0=OCD not supported,
+ 0x7=OCD default state */
+ unsigned int rtt;
+ unsigned int al; /* Posted CAS# additive latency (AL) */
+ unsigned int ods = 0; /* Output Drive Strength:
+ 0 = Full strength (18ohm)
+ 1 = Reduced strength (4ohm) */
+ unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
+ 1=Disable (Test/Debug) */
+
+ /* Mode Register (MR) */
+ unsigned int mr; /* Mode Register Definition */
+ unsigned int pd; /* Power-Down Mode */
+ unsigned int wr; /* Write Recovery */
+ unsigned int dll_res; /* DLL Reset */
+ unsigned int mode; /* Normal=0 or Test=1 */
+ unsigned int caslat = 0;/* CAS# latency */
+ /* BT: Burst Type (0=Sequential, 1=Interleaved) */
+ unsigned int bt;
+ unsigned int bl; /* BL: Burst Length */
+
+#if defined(CONFIG_FSL_DDR2)
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+#endif
+
+ rtt = fsl_ddr_get_rtt();
+
+ al = additive_latency;
+
+ esdmode = (0
+ | ((mrs & 0x3) << 14)
+ | ((outputs & 0x1) << 12)
+ | ((rdqs_en & 0x1) << 11)
+ | ((dqs_en & 0x1) << 10)
+ | ((ocd & 0x7) << 7)
+ | ((rtt & 0x2) << 5) /* rtt field is split */
+ | ((al & 0x7) << 3)
+ | ((rtt & 0x1) << 2) /* rtt field is split */
+ | ((ods & 0x1) << 1)
+ | ((dll_en & 0x1) << 0)
+ );
+
+ mr = 0; /* FIXME: CHECKME */
+
+ /*
+ * 0 = Fast Exit (Normal)
+ * 1 = Slow Exit (Low Power)
+ */
+ pd = 0;
+
+#if defined(CONFIG_FSL_DDR1)
+ wr = 0; /* Historical */
+#elif defined(CONFIG_FSL_DDR2)
+ wr = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps - 1;
+#endif
+ dll_res = 0;
+ mode = 0;
+
+#if defined(CONFIG_FSL_DDR1)
+ if (1 <= cas_latency && cas_latency <= 4) {
+ unsigned char mode_caslat_table[4] = {
+ 0x5, /* 1.5 clocks */
+ 0x2, /* 2.0 clocks */
+ 0x6, /* 2.5 clocks */
+ 0x3 /* 3.0 clocks */
+ };
+ caslat = mode_caslat_table[cas_latency - 1];
+ } else {
+ printf("Warning: unknown cas_latency %d\n", cas_latency);
+ }
+#elif defined(CONFIG_FSL_DDR2)
+ caslat = cas_latency;
+#endif
+ bt = 0;
+
+ switch (popts->burst_length) {
+ case DDR_BL4:
+ bl = 2;
+ break;
+ case DDR_BL8:
+ bl = 3;
+ break;
+ default:
+ printf("Error: invalid burst length of %u specified. "
+ " Defaulting to 4 beats.\n",
+ popts->burst_length);
+ bl = 2;
+ break;
+ }
+
+ sdmode = (0
+ | ((mr & 0x3) << 14)
+ | ((pd & 0x1) << 12)
+ | ((wr & 0x7) << 9)
+ | ((dll_res & 0x1) << 8)
+ | ((mode & 0x1) << 7)
+ | ((caslat & 0x7) << 4)
+ | ((bt & 0x1) << 3)
+ | ((bl & 0x7) << 0)
+ );
+
+ ddr->ddr_sdram_mode = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+ debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
+}
+#endif
+
+/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
+static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int init_value; /* Initialization value */
+
+ init_value = 0xDEADBEEF;
+ ddr->ddr_data_init = init_value;
+}
+
+/*
+ * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
+ * The old controller on the 8540/60 doesn't have this register.
+ * Hope it's OK to set it (to 0) anyway.
+ */
+static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned int clk_adjust; /* Clock adjust */
+
+ clk_adjust = popts->clk_adjust;
+ ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
+}
+
+/* DDR Initialization Address (DDR_INIT_ADDR) */
+static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int init_addr = 0; /* Initialization address */
+
+ ddr->ddr_init_addr = init_addr;
+}
+
+/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
+static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int uia = 0; /* Use initialization address */
+ unsigned int init_ext_addr = 0; /* Initialization address */
+
+ ddr->ddr_init_ext_addr = (0
+ | ((uia & 0x1) << 31)
+ | (init_ext_addr & 0xF)
+ );
+}
+
+/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
+static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
+ unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
+ unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
+ unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
+ unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
+
+#if defined(CONFIG_FSL_DDR3)
+ if (popts->burst_length == DDR_BL8) {
+ /* We set BL/2 for fixed BL8 */
+ rrt = 0; /* BL/2 clocks */
+ wwt = 0; /* BL/2 clocks */
+ } else {
+ /* We need to set BL/2 + 2 to BC4 and OTF */
+ rrt = 2; /* BL/2 + 2 clocks */
+ wwt = 2; /* BL/2 + 2 clocks */
+ }
+ dll_lock = 1; /* tDLLK = 512 clocks from spec */
+#endif
+ ddr->timing_cfg_4 = (0
+ | ((rwt & 0xf) << 28)
+ | ((wrt & 0xf) << 24)
+ | ((rrt & 0xf) << 20)
+ | ((wwt & 0xf) << 16)
+ | (dll_lock & 0x3)
+ );
+ debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
+}
+
+/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
+static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rodt_on = 0; /* Read to ODT on */
+ unsigned int rodt_off = 0; /* Read to ODT off */
+ unsigned int wodt_on = 0; /* Write to ODT on */
+ unsigned int wodt_off = 0; /* Write to ODT off */
+
+#if defined(CONFIG_FSL_DDR3)
+ rodt_on = 3; /* 2 clocks */
+ rodt_off = 4; /* 4 clocks */
+ wodt_on = 2; /* 1 clocks */
+ wodt_off = 4; /* 4 clocks */
+#endif
+
+ ddr->timing_cfg_5 = (0
+ | ((rodt_on & 0x1f) << 24)
+ | ((rodt_off & 0x7) << 20)
+ | ((wodt_on & 0x1f) << 12)
+ | ((wodt_off & 0x7) << 8)
+ );
+ debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
+}
+
+/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
+static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en)
+{
+ unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
+ /* Normal Operation Full Calibration Time (tZQoper) */
+ unsigned int zqoper = 0;
+ /* Normal Operation Short Calibration Time (tZQCS) */
+ unsigned int zqcs = 0;
+
+ if (zq_en) {
+ zqinit = 9; /* 512 clocks */
+ zqoper = 8; /* 256 clocks */
+ zqcs = 6; /* 64 clocks */
+ }
+
+ ddr->ddr_zq_cntl = (0
+ | ((zq_en & 0x1) << 31)
+ | ((zqinit & 0xF) << 24)
+ | ((zqoper & 0xF) << 16)
+ | ((zqcs & 0xF) << 8)
+ );
+}
+
+/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
+static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
+ const memctl_options_t *popts)
+{
+ /*
+ * First DQS pulse rising edge after margining mode
+ * is programmed (tWL_MRD)
+ */
+ unsigned int wrlvl_mrd = 0;
+ /* ODT delay after margining mode is programmed (tWL_ODTEN) */
+ unsigned int wrlvl_odten = 0;
+ /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
+ unsigned int wrlvl_dqsen = 0;
+ /* WRLVL_SMPL: Write leveling sample time */
+ unsigned int wrlvl_smpl = 0;
+ /* WRLVL_WLR: Write leveling repeition time */
+ unsigned int wrlvl_wlr = 0;
+ /* WRLVL_START: Write leveling start time */
+ unsigned int wrlvl_start = 0;
+
+ /* suggest enable write leveling for DDR3 due to fly-by topology */
+ if (wrlvl_en) {
+ /* tWL_MRD min = 40 nCK, we set it 64 */
+ wrlvl_mrd = 0x6;
+ /* tWL_ODTEN 128 */
+ wrlvl_odten = 0x7;
+ /* tWL_DQSEN min = 25 nCK, we set it 32 */
+ wrlvl_dqsen = 0x5;
+ /*
+ * Write leveling sample time at least need 6 clocks
+ * higher than tWLO to allow enough time for progagation
+ * delay and sampling the prime data bits.
+ */
+ wrlvl_smpl = 0xf;
+ /*
+ * Write leveling repetition time
+ * at least tWLO + 6 clocks clocks
+ * we set it 32
+ */
+ wrlvl_wlr = 0x5;
+ /*
+ * Write leveling start time
+ * The value use for the DQS_ADJUST for the first sample
+ * when write leveling is enabled.
+ */
+ wrlvl_start = 0x8;
+ /*
+ * Override the write leveling sample and start time
+ * according to specific board
+ */
+ if (popts->wrlvl_override) {
+ wrlvl_smpl = popts->wrlvl_sample;
+ wrlvl_start = popts->wrlvl_start;
+ }
+ }
+
+ ddr->ddr_wrlvl_cntl = (0
+ | ((wrlvl_en & 0x1) << 31)
+ | ((wrlvl_mrd & 0x7) << 24)
+ | ((wrlvl_odten & 0x7) << 20)
+ | ((wrlvl_dqsen & 0x7) << 16)
+ | ((wrlvl_smpl & 0xf) << 12)
+ | ((wrlvl_wlr & 0x7) << 8)
+ | ((wrlvl_start & 0x1F) << 0)
+ );
+}
+
+/* DDR Self Refresh Counter (DDR_SR_CNTR) */
+static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
+{
+ /* Self Refresh Idle Threshold */
+ ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
+}
+
+/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */
+static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */
+ unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */
+ unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */
+ unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */
+ unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */
+ unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */
+ unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */
+ unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */
+
+ ddr->ddr_sdram_rcw_1 = (0
+ | ((rcw0 & 0xF) << 28)
+ | ((rcw1 & 0xF) << 24)
+ | ((rcw2 & 0xF) << 20)
+ | ((rcw3 & 0xF) << 16)
+ | ((rcw4 & 0xF) << 12)
+ | ((rcw5 & 0xF) << 8)
+ | ((rcw6 & 0xF) << 4)
+ | ((rcw7 & 0xF) << 0)
+ );
+}
+
+/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */
+static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */
+ unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */
+ unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */
+ unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */
+ unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */
+ unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */
+ unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */
+ unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */
+
+ ddr->ddr_sdram_rcw_2 = (0
+ | ((rcw8 & 0xF) << 28)
+ | ((rcw9 & 0xF) << 24)
+ | ((rcw10 & 0xF) << 20)
+ | ((rcw11 & 0xF) << 16)
+ | ((rcw12 & 0xF) << 12)
+ | ((rcw13 & 0xF) << 8)
+ | ((rcw14 & 0xF) << 4)
+ | ((rcw15 & 0xF) << 0)
+ );
+}
+
+unsigned int
+check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int res = 0;
+
+ /*
+ * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
+ * not set at the same time.
+ */
+ if (ddr->ddr_sdram_cfg & 0x10000000
+ && ddr->ddr_sdram_cfg & 0x00008000) {
+ printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
+ " should not be set at the same time.\n");
+ res++;
+ }
+
+ return res;
+}
+
+unsigned int
+compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ const dimm_params_t *dimm_params,
+ unsigned int dbw_cap_adj)
+{
+ unsigned int i;
+ unsigned int cas_latency;
+ unsigned int additive_latency;
+ unsigned int sr_it;
+ unsigned int zq_en;
+ unsigned int wrlvl_en;
+
+ memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
+
+ if (common_dimm == NULL) {
+ printf("Error: subset DIMM params struct null pointer\n");
+ return 1;
+ }
+
+ /*
+ * Process overrides first.
+ *
+ * FIXME: somehow add dereated caslat to this
+ */
+ cas_latency = (popts->cas_latency_override)
+ ? popts->cas_latency_override_value
+ : common_dimm->lowest_common_SPD_caslat;
+
+ additive_latency = (popts->additive_latency_override)
+ ? popts->additive_latency_override_value
+ : common_dimm->additive_latency;
+
+ sr_it = (popts->auto_self_refresh_en)
+ ? popts->sr_it
+ : 0;
+ /* ZQ calibration */
+ zq_en = (popts->zq_en) ? 1 : 0;
+ /* write leveling */
+ wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
+
+ /* Chip Select Memory Bounds (CSn_BNDS) */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ unsigned long long ea = 0, sa = 0;
+
+ if (popts->ba_intlv_ctl && (i > 0) &&
+ ((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) {
+ /* Don't set up boundaries for other CS
+ * other than CS0, if bank interleaving
+ * is enabled and not CS2+CS3 interleaved.
+ * But we need to set the ODT_RD_CFG and
+ * ODT_WR_CFG for CS1_CONFIG here.
+ */
+ set_csn_config(i, ddr, popts, dimm_params);
+ break;
+ }
+
+ if (dimm_params[i/2].n_ranks == 0) {
+ debug("Skipping setup of CS%u "
+ "because n_ranks on DIMM %u is 0\n", i, i/2);
+ continue;
+ }
+ if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
+ /*
+ * This works superbank 2CS
+ * There are 2 memory controllers configured
+ * identically, memory is interleaved between them,
+ * and each controller uses rank interleaving within
+ * itself. Therefore the starting and ending address
+ * on each controller is twice the amount present on
+ * each controller.
+ */
+ unsigned long long rank_density
+ = dimm_params[0].capacity;
+ ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
+ }
+ else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
+ /*
+ * If memory interleaving between controllers is NOT
+ * enabled, the starting address for each memory
+ * controller is distinct. However, because rank
+ * interleaving is enabled, the starting and ending
+ * addresses of the total memory on that memory
+ * controller needs to be programmed into its
+ * respective CS0_BNDS.
+ */
+ unsigned long long rank_density
+ = dimm_params[i/2].rank_density;
+ switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+ case FSL_DDR_CS0_CS1_CS2_CS3:
+ /* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
+ * needs to be set.
+ */
+ sa = common_dimm->base_address;
+ ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
+ break;
+ case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+ /* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
+ * and CS2_CNDS need to be set.
+ */
+ if (!(i&1)) {
+ sa = dimm_params[i/2].base_address;
+ ea = sa + (i * (rank_density >>
+ dbw_cap_adj)) - 1;
+ }
+ break;
+ case FSL_DDR_CS0_CS1:
+ /* CS0+CS1 interleaving, CS0_CNDS needs
+ * to be set
+ */
+ sa = common_dimm->base_address;
+ ea = sa + (2 * (rank_density >> dbw_cap_adj))-1;
+ break;
+ case FSL_DDR_CS2_CS3:
+ /* CS2+CS3 interleaving*/
+ if (i == 2) {
+ sa = dimm_params[i/2].base_address;
+ ea = sa + (2 * (rank_density >>
+ dbw_cap_adj)) - 1;
+ }
+ break;
+ default: /* No bank(chip-select) interleaving */
+ break;
+ }
+ }
+ else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
+ /*
+ * Only the rank on CS0 of each memory controller may
+ * be used if memory controller interleaving is used
+ * without rank interleaving within each memory
+ * controller. However, the ending address programmed
+ * into each CS0 must be the sum of the amount of
+ * memory in the two CS0 ranks.
+ */
+ if (i == 0) {
+ unsigned long long rank_density
+ = dimm_params[0].rank_density;
+ ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
+ }
+
+ }
+ else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) {
+ /*
+ * No rank interleaving and no memory controller
+ * interleaving.
+ */
+ unsigned long long rank_density
+ = dimm_params[i/2].rank_density;
+ sa = dimm_params[i/2].base_address;
+ ea = sa + (rank_density >> dbw_cap_adj) - 1;
+ if (i&1) {
+ if ((dimm_params[i/2].n_ranks == 1)) {
+ /* Odd chip select, single-rank dimm */
+ sa = 0;
+ ea = 0;
+ } else {
+ /* Odd chip select, dual-rank DIMM */
+ sa += rank_density >> dbw_cap_adj;
+ ea += rank_density >> dbw_cap_adj;
+ }
+ }
+ }
+
+ sa >>= 24;
+ ea >>= 24;
+
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16) /* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+
+ debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
+ set_csn_config(i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
+ }
+
+#if !defined(CONFIG_FSL_DDR1)
+ set_timing_cfg_0(ddr);
+#endif
+
+ set_timing_cfg_3(ddr, common_dimm, cas_latency);
+ set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
+ set_timing_cfg_2(ddr, popts, common_dimm,
+ cas_latency, additive_latency);
+
+ set_ddr_sdram_cfg(ddr, popts, common_dimm);
+
+ set_ddr_sdram_cfg_2(ddr, popts);
+ set_ddr_sdram_mode(ddr, popts, common_dimm,
+ cas_latency, additive_latency);
+ set_ddr_sdram_mode_2(ddr, popts);
+ set_ddr_sdram_interval(ddr, popts, common_dimm);
+ set_ddr_data_init(ddr);
+ set_ddr_sdram_clk_cntl(ddr, popts);
+ set_ddr_init_addr(ddr);
+ set_ddr_init_ext_addr(ddr);
+ set_timing_cfg_4(ddr, popts);
+ set_timing_cfg_5(ddr);
+
+ set_ddr_zq_cntl(ddr, zq_en);
+ set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
+
+ set_ddr_sr_cntr(ddr, sr_it);
+
+ set_ddr_sdram_rcw_1(ddr);
+ set_ddr_sdram_rcw_2(ddr);
+
+ return check_fsl_memctl_config_regs(ddr);
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef FSL_DDR_MAIN_H
+#define FSL_DDR_MAIN_H
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+#include "common_timing_params.h"
+
+/*
+ * Bind the main DDR setup driver's generic names
+ * to this specific DDR technology.
+ */
+static __inline__ int
+compute_dimm_parameters(const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
+{
+ return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
+}
+
+/*
+ * Data Structures
+ *
+ * All data structures have to be on the stack
+ */
+#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
+
+typedef struct {
+ generic_spd_eeprom_t
+ spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
+ struct dimm_params_s
+ dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
+ memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
+ common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
+ fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
+} fsl_ddr_info_t;
+
+/* Compute steps */
+#define STEP_GET_SPD (1 << 0)
+#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
+#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
+#define STEP_GATHER_OPTS (1 << 3)
+#define STEP_ASSIGN_ADDRESSES (1 << 4)
+#define STEP_COMPUTE_REGS (1 << 5)
+#define STEP_PROGRAM_REGS (1 << 6)
+#define STEP_ALL 0xFFF
+
+extern unsigned long long
+fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step);
+
+extern const char * step_to_string(unsigned int step);
+
+extern unsigned int
+compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ const dimm_params_t *dimm_parameters,
+ unsigned int dbw_capacity_adjust);
+extern unsigned int
+compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+ common_timing_params_t *outpdimm,
+ unsigned int number_of_dimms);
+extern unsigned int populate_memctl_options(int all_DIMMs_registered,
+ memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num);
+
+extern unsigned int mclk_to_picos(unsigned int mclk);
+extern unsigned int get_memory_clk_period_ps(void);
+extern unsigned int picos_to_mclk(unsigned int picos);
+
+#endif
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ * DDR I DDR II
+ * Bit Size Size
+ * --- ----- ------
+ * 7 high 512MB 512MB
+ * 6 256MB 256MB
+ * 5 128MB 128MB
+ * 4 64MB 16GB
+ * 3 32MB 8GB
+ * 2 16MB 4GB
+ * 1 2GB 2GB
+ * 0 low 1GB 1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ */
+
+static unsigned long long
+compute_ranksize(unsigned int mem_type, unsigned char row_dens)
+{
+ unsigned long long bsize;
+
+ /* Bottom 2 bits up to the top. */
+ bsize = ((row_dens >> 2) | ((row_dens & 3) << 6));
+ bsize <<= 24ULL;
+ debug("DDR: DDR I rank density = 0x%08x\n", bsize);
+
+ return bsize;
+}
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II. No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+static unsigned int
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
+{
+ /* Table look up the lower nibble, allow DDR I & II. */
+ unsigned int tenths_ps[16] = {
+ 0,
+ 100,
+ 200,
+ 300,
+ 400,
+ 500,
+ 600,
+ 700,
+ 800,
+ 900,
+ 250, /* This and the next 3 entries valid ... */
+ 330, /* ... only for tCK calculations. */
+ 660,
+ 750,
+ 0, /* undefined */
+ 0 /* undefined */
+ };
+
+ unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+ unsigned int tenth_ns = spd_val & 0x0F;
+ unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+ return ps;
+}
+
+static unsigned int
+convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
+{
+ unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
+ unsigned int hundredth_ns = spd_val & 0x0F;
+ unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
+
+ return ps;
+}
+
+static unsigned int byte40_table_ps[8] = {
+ 0,
+ 250,
+ 330,
+ 500,
+ 660,
+ 750,
+ 0, /* supposed to be RFC, but not sure what that means */
+ 0 /* Undefined */
+};
+
+static unsigned int
+compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
+{
+ unsigned int trfc_ps;
+
+ trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
+ + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
+
+ return trfc_ps;
+}
+
+static unsigned int
+compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
+{
+ unsigned int trc_ps;
+
+ trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
+
+ return trc_ps;
+}
+
+/*
+ * tCKmax from DDR I SPD Byte 43
+ *
+ * Bits 7:2 == whole ns
+ * Bits 1:0 == quarter ns
+ * 00 == 0.00 ns
+ * 01 == 0.25 ns
+ * 10 == 0.50 ns
+ * 11 == 0.75 ns
+ *
+ * Returns picoseconds.
+ */
+static unsigned int
+compute_tckmax_from_spd_ps(unsigned int byte43)
+{
+ return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250;
+}
+
+/*
+ * Determine Refresh Rate. Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+static unsigned int
+determine_refresh_rate_ps(const unsigned int spd_refresh)
+{
+ unsigned int refresh_time_ps[8] = {
+ 15625000, /* 0 Normal 1.00x */
+ 3900000, /* 1 Reduced .25x */
+ 7800000, /* 2 Extended .50x */
+ 31300000, /* 3 Extended 2.00x */
+ 62500000, /* 4 Extended 4.00x */
+ 125000000, /* 5 Extended 8.00x */
+ 15625000, /* 6 Normal 1.00x filler */
+ 15625000, /* 7 Normal 1.00x filler */
+ };
+
+ return refresh_time_ps[spd_refresh & 0x7];
+}
+
+/*
+ * The purpose of this function is to compute a suitable
+ * CAS latency given the DRAM clock period. The SPD only
+ * defines at most 3 CAS latencies. Typically the slower in
+ * frequency the DIMM runs at, the shorter its CAS latency can be.
+ * If the DIMM is operating at a sufficiently low frequency,
+ * it may be able to run at a CAS latency shorter than the
+ * shortest SPD-defined CAS latency.
+ *
+ * If a CAS latency is not found, 0 is returned.
+ *
+ * Do this by finding in the standard speed bin table the longest
+ * tCKmin that doesn't exceed the value of mclk_ps (tCK).
+ *
+ * An assumption made is that the SDRAM device allows the
+ * CL to be programmed for a value that is lower than those
+ * advertised by the SPD. This is not always the case,
+ * as those modes not defined in the SPD are optional.
+ *
+ * CAS latency de-rating based upon values JEDEC Standard No. 79-E
+ * Table 11.
+ *
+ * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2
+ */
+ /* CL2.0 CL2.5 CL3.0 */
+unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 };
+
+unsigned int
+compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
+{
+ const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins);
+ unsigned int lowest_tCKmin_found = 0;
+ unsigned int lowest_tCKmin_CL = 0;
+ unsigned int i;
+
+ debug("mclk_ps = %u\n", mclk_ps);
+
+ for (i = 0; i < num_speed_bins; i++) {
+ unsigned int x = ddr1_speed_bins[i];
+ debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
+ i, x, lowest_tCKmin_found);
+ if (x && lowest_tCKmin_found <= x && x <= mclk_ps) {
+ lowest_tCKmin_found = x;
+ lowest_tCKmin_CL = i + 1;
+ }
+ }
+
+ debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
+
+ return lowest_tCKmin_CL;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR1 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ * FIXME: use #define for the retvals
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
+{
+ unsigned int retval;
+
+ if (spd->mem_type) {
+ if (spd->mem_type != SPD_MEMTYPE_DDR) {
+ printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number);
+ return 1;
+ }
+ } else {
+ memset(pdimm, 0, sizeof(dimm_params_t));
+ return 1;
+ }
+
+ retval = ddr1_spd_check(spd);
+ if (retval) {
+ printf("DIMM %u: failed checksum\n", dimm_number);
+ return 2;
+ }
+
+ /*
+ * The part name in ASCII in the SPD EEPROM is not null terminated.
+ * Guarantee null termination here by presetting all bytes to 0
+ * and copying the part name in ASCII from the SPD onto it
+ */
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+ /* DIMM organization parameters */
+ pdimm->n_ranks = spd->nrows;
+ pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens);
+ pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+ pdimm->data_width = spd->dataw_lsb;
+ pdimm->primary_sdram_width = spd->primw;
+ pdimm->ec_sdram_width = spd->ecw;
+
+ /*
+ * FIXME: Need to determine registered_dimm status.
+ * 1 == register buffered
+ * 0 == unbuffered
+ */
+ pdimm->registered_dimm = 0; /* unbuffered */
+
+ /* SDRAM device parameters */
+ pdimm->n_row_addr = spd->nrow_addr;
+ pdimm->n_col_addr = spd->ncol_addr;
+ pdimm->n_banks_per_sdram_device = spd->nbanks;
+ pdimm->edc_config = spd->config;
+ pdimm->burst_lengths_bitmask = spd->burstl;
+ pdimm->row_density = spd->bank_dens;
+
+ /*
+ * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+ * The SPD clk_cycle field (tCKmin) is measured in tenths of
+ * nanoseconds and represented as BCD.
+ */
+ pdimm->tCKmin_X_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
+ pdimm->tCKmin_X_minus_1_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
+ pdimm->tCKmin_X_minus_2_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
+
+ pdimm->tCKmax_ps = compute_tckmax_from_spd_ps(spd->tckmax);
+
+ /*
+ * Compute CAS latencies defined by SPD
+ * The SPD caslat_X should have at least 1 and at most 3 bits set.
+ *
+ * If cas_lat after masking is 0, the __ilog2 function returns
+ * 255 into the variable. This behavior is abused once.
+ */
+ pdimm->caslat_X = __ilog2(spd->cas_lat);
+ pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
+ & ~(1 << pdimm->caslat_X));
+ pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
+ & ~(1 << pdimm->caslat_X)
+ & ~(1 << pdimm->caslat_X_minus_1));
+
+ /* Compute CAS latencies below that defined by SPD */
+ pdimm->caslat_lowest_derated
+ = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
+
+ /* Compute timing parameters */
+ pdimm->tRCD_ps = spd->trcd * 250;
+ pdimm->tRP_ps = spd->trp * 250;
+ pdimm->tRAS_ps = spd->tras * 1000;
+
+ pdimm->tWR_ps = mclk_to_picos(3);
+ pdimm->tWTR_ps = mclk_to_picos(1);
+ pdimm->tRFC_ps = compute_trfc_ps_from_spd(0, spd->trfc);
+
+ pdimm->tRRD_ps = spd->trrd * 250;
+ pdimm->tRC_ps = compute_trc_ps_from_spd(0, spd->trc);
+
+ pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
+
+ pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
+ pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
+ pdimm->tDS_ps
+ = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
+ pdimm->tDH_ps
+ = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
+
+ pdimm->tRTP_ps = mclk_to_picos(2); /* By the book. */
+ pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
+ pdimm->tQHS_ps = spd->tqhs * 10;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ * DDR I DDR II
+ * Bit Size Size
+ * --- ----- ------
+ * 7 high 512MB 512MB
+ * 6 256MB 256MB
+ * 5 128MB 128MB
+ * 4 64MB 16GB
+ * 3 32MB 8GB
+ * 2 16MB 4GB
+ * 1 2GB 2GB
+ * 0 low 1GB 1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ *
+ */
+static unsigned long long
+compute_ranksize(unsigned int mem_type, unsigned char row_dens)
+{
+ unsigned long long bsize;
+
+ /* Bottom 5 bits up to the top. */
+ bsize = ((row_dens >> 5) | ((row_dens & 31) << 3));
+ bsize <<= 27ULL;
+ debug("DDR: DDR II rank density = 0x%08x\n", bsize);
+
+ return bsize;
+}
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II. No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+static unsigned int
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
+{
+ /* Table look up the lower nibble, allow DDR I & II. */
+ unsigned int tenths_ps[16] = {
+ 0,
+ 100,
+ 200,
+ 300,
+ 400,
+ 500,
+ 600,
+ 700,
+ 800,
+ 900,
+ 250, /* This and the next 3 entries valid ... */
+ 330, /* ... only for tCK calculations. */
+ 660,
+ 750,
+ 0, /* undefined */
+ 0 /* undefined */
+ };
+
+ unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+ unsigned int tenth_ns = spd_val & 0x0F;
+ unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+ return ps;
+}
+
+static unsigned int
+convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
+{
+ unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
+ unsigned int hundredth_ns = spd_val & 0x0F;
+ unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
+
+ return ps;
+}
+
+static unsigned int byte40_table_ps[8] = {
+ 0,
+ 250,
+ 330,
+ 500,
+ 660,
+ 750,
+ 0, /* supposed to be RFC, but not sure what that means */
+ 0 /* Undefined */
+};
+
+static unsigned int
+compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
+{
+ unsigned int trfc_ps;
+
+ trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
+ + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
+
+ return trfc_ps;
+}
+
+static unsigned int
+compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
+{
+ unsigned int trc_ps;
+
+ trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
+
+ return trc_ps;
+}
+
+/*
+ * Determine Refresh Rate. Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+static unsigned int
+determine_refresh_rate_ps(const unsigned int spd_refresh)
+{
+ unsigned int refresh_time_ps[8] = {
+ 15625000, /* 0 Normal 1.00x */
+ 3900000, /* 1 Reduced .25x */
+ 7800000, /* 2 Extended .50x */
+ 31300000, /* 3 Extended 2.00x */
+ 62500000, /* 4 Extended 4.00x */
+ 125000000, /* 5 Extended 8.00x */
+ 15625000, /* 6 Normal 1.00x filler */
+ 15625000, /* 7 Normal 1.00x filler */
+ };
+
+ return refresh_time_ps[spd_refresh & 0x7];
+}
+
+/*
+ * The purpose of this function is to compute a suitable
+ * CAS latency given the DRAM clock period. The SPD only
+ * defines at most 3 CAS latencies. Typically the slower in
+ * frequency the DIMM runs at, the shorter its CAS latency can.
+ * be. If the DIMM is operating at a sufficiently low frequency,
+ * it may be able to run at a CAS latency shorter than the
+ * shortest SPD-defined CAS latency.
+ *
+ * If a CAS latency is not found, 0 is returned.
+ *
+ * Do this by finding in the standard speed bin table the longest
+ * tCKmin that doesn't exceed the value of mclk_ps (tCK).
+ *
+ * An assumption made is that the SDRAM device allows the
+ * CL to be programmed for a value that is lower than those
+ * advertised by the SPD. This is not always the case,
+ * as those modes not defined in the SPD are optional.
+ *
+ * CAS latency de-rating based upon values JEDEC Standard No. 79-2C
+ * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS,
+ * and tRC for corresponding bin"
+ *
+ * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
+ * Not certain if any good value exists for CL=2
+ */
+ /* CL2 CL3 CL4 CL5 CL6 */
+unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500 };
+
+unsigned int
+compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
+{
+ const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins);
+ unsigned int lowest_tCKmin_found = 0;
+ unsigned int lowest_tCKmin_CL = 0;
+ unsigned int i;
+
+ debug("mclk_ps = %u\n", mclk_ps);
+
+ for (i = 0; i < num_speed_bins; i++) {
+ unsigned int x = ddr2_speed_bins[i];
+ debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
+ i, x, lowest_tCKmin_found);
+ if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) {
+ lowest_tCKmin_found = x;
+ lowest_tCKmin_CL = i + 2;
+ }
+ }
+
+ debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
+
+ return lowest_tCKmin_CL;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR2 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ * FIXME: use #define for the retvals
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
+{
+ unsigned int retval;
+
+ if (spd->mem_type) {
+ if (spd->mem_type != SPD_MEMTYPE_DDR2) {
+ printf("DIMM %u: is not a DDR2 SPD.\n", dimm_number);
+ return 1;
+ }
+ } else {
+ memset(pdimm, 0, sizeof(dimm_params_t));
+ return 1;
+ }
+
+ retval = ddr2_spd_check(spd);
+ if (retval) {
+ printf("DIMM %u: failed checksum\n", dimm_number);
+ return 2;
+ }
+
+ /*
+ * The part name in ASCII in the SPD EEPROM is not null terminated.
+ * Guarantee null termination here by presetting all bytes to 0
+ * and copying the part name in ASCII from the SPD onto it
+ */
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+ /* DIMM organization parameters */
+ pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1;
+ pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens);
+ pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+ pdimm->data_width = spd->dataw;
+ pdimm->primary_sdram_width = spd->primw;
+ pdimm->ec_sdram_width = spd->ecw;
+
+ /* FIXME: what about registered SO-DIMM? */
+ switch (spd->dimm_type) {
+ case 0x01: /* RDIMM */
+ case 0x10: /* Mini-RDIMM */
+ pdimm->registered_dimm = 1; /* register buffered */
+ break;
+
+ case 0x02: /* UDIMM */
+ case 0x04: /* SO-DIMM */
+ case 0x08: /* Micro-DIMM */
+ case 0x20: /* Mini-UDIMM */
+ pdimm->registered_dimm = 0; /* unbuffered */
+ break;
+
+ default:
+ printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
+ return 1;
+ break;
+ }
+
+ /* SDRAM device parameters */
+ pdimm->n_row_addr = spd->nrow_addr;
+ pdimm->n_col_addr = spd->ncol_addr;
+ pdimm->n_banks_per_sdram_device = spd->nbanks;
+ pdimm->edc_config = spd->config;
+ pdimm->burst_lengths_bitmask = spd->burstl;
+ pdimm->row_density = spd->rank_dens;
+
+ /*
+ * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+ * The SPD clk_cycle field (tCKmin) is measured in tenths of
+ * nanoseconds and represented as BCD.
+ */
+ pdimm->tCKmin_X_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
+ pdimm->tCKmin_X_minus_1_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
+ pdimm->tCKmin_X_minus_2_ps
+ = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
+
+ pdimm->tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax);
+
+ /*
+ * Compute CAS latencies defined by SPD
+ * The SPD caslat_X should have at least 1 and at most 3 bits set.
+ *
+ * If cas_lat after masking is 0, the __ilog2 function returns
+ * 255 into the variable. This behavior is abused once.
+ */
+ pdimm->caslat_X = __ilog2(spd->cas_lat);
+ pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
+ & ~(1 << pdimm->caslat_X));
+ pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
+ & ~(1 << pdimm->caslat_X)
+ & ~(1 << pdimm->caslat_X_minus_1));
+
+ /* Compute CAS latencies below that defined by SPD */
+ pdimm->caslat_lowest_derated
+ = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
+
+ /* Compute timing parameters */
+ pdimm->tRCD_ps = spd->trcd * 250;
+ pdimm->tRP_ps = spd->trp * 250;
+ pdimm->tRAS_ps = spd->tras * 1000;
+
+ pdimm->tWR_ps = spd->twr * 250;
+ pdimm->tWTR_ps = spd->twtr * 250;
+ pdimm->tRFC_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc);
+
+ pdimm->tRRD_ps = spd->trrd * 250;
+ pdimm->tRC_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc);
+
+ pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
+
+ pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
+ pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
+ pdimm->tDS_ps
+ = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
+ pdimm->tDH_ps
+ = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
+
+ pdimm->tRTP_ps = spd->trtp * 250;
+ pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
+ pdimm->tQHS_ps = spd->tqhs * 10;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * calculate the organization and timing parameter
+ * from ddr3 spd, please refer to the spec
+ * JEDEC standard No.21-C 4_01_02_11R18.pdf
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * each rank size =
+ * sdram capacity(bit) / 8 * primary bus width / sdram width
+ *
+ * where: sdram capacity = spd byte4[3:0]
+ * primary bus width = spd byte8[2:0]
+ * sdram width = spd byte7[2:0]
+ *
+ * SPD byte4 - sdram density and banks
+ * bit[3:0] size(bit) size(byte)
+ * 0000 256Mb 32MB
+ * 0001 512Mb 64MB
+ * 0010 1Gb 128MB
+ * 0011 2Gb 256MB
+ * 0100 4Gb 512MB
+ * 0101 8Gb 1GB
+ * 0110 16Gb 2GB
+ *
+ * SPD byte8 - module memory bus width
+ * bit[2:0] primary bus width
+ * 000 8bits
+ * 001 16bits
+ * 010 32bits
+ * 011 64bits
+ *
+ * SPD byte7 - module organiztion
+ * bit[2:0] sdram device width
+ * 000 4bits
+ * 001 8bits
+ * 010 16bits
+ * 011 32bits
+ *
+ */
+static unsigned long long
+compute_ranksize(const ddr3_spd_eeprom_t *spd)
+{
+ unsigned long long bsize;
+
+ int nbit_sdram_cap_bsize = 0;
+ int nbit_primary_bus_width = 0;
+ int nbit_sdram_width = 0;
+
+ if ((spd->density_banks & 0xf) < 7)
+ nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
+ if ((spd->bus_width & 0x7) < 4)
+ nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
+ if ((spd->organization & 0x7) < 4)
+ nbit_sdram_width = (spd->organization & 0x7) + 2;
+
+ bsize = 1ULL << (nbit_sdram_cap_bsize - 3
+ + nbit_primary_bus_width - nbit_sdram_width);
+
+ debug("DDR: DDR III rank density = 0x%16lx\n", bsize);
+
+ return bsize;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR3 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
+{
+ unsigned int retval;
+ unsigned int mtb_ps;
+
+ if (spd->mem_type) {
+ if (spd->mem_type != SPD_MEMTYPE_DDR3) {
+ printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
+ return 1;
+ }
+ } else {
+ memset(pdimm, 0, sizeof(dimm_params_t));
+ return 1;
+ }
+
+ retval = ddr3_spd_check(spd);
+ if (retval) {
+ printf("DIMM %u: failed checksum\n", dimm_number);
+ return 2;
+ }
+
+ /*
+ * The part name in ASCII in the SPD EEPROM is not null terminated.
+ * Guarantee null termination here by presetting all bytes to 0
+ * and copying the part name in ASCII from the SPD onto it
+ */
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+ /* DIMM organization parameters */
+ pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
+ pdimm->rank_density = compute_ranksize(spd);
+ pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+ pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
+ if ((spd->bus_width >> 3) & 0x3)
+ pdimm->ec_sdram_width = 8;
+ else
+ pdimm->ec_sdram_width = 0;
+ pdimm->data_width = pdimm->primary_sdram_width
+ + pdimm->ec_sdram_width;
+
+ switch (spd->module_type & 0xf) {
+ case 0x01: /* RDIMM */
+ case 0x05: /* Mini-RDIMM */
+ pdimm->registered_dimm = 1; /* register buffered */
+ break;
+
+ case 0x02: /* UDIMM */
+ case 0x03: /* SO-DIMM */
+ case 0x04: /* Micro-DIMM */
+ case 0x06: /* Mini-UDIMM */
+ pdimm->registered_dimm = 0; /* unbuffered */
+ break;
+
+ default:
+ printf("unknown dimm_type 0x%02X\n", spd->module_type);
+ return 1;
+ }
+
+ /* SDRAM device parameters */
+ pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
+ pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
+ pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
+
+ /*
+ * The SPD spec has not the ECC bit,
+ * We consider the DIMM as ECC capability
+ * when the extension bus exist
+ */
+ if (pdimm->ec_sdram_width)
+ pdimm->edc_config = 0x02;
+ else
+ pdimm->edc_config = 0x00;
+
+ /*
+ * The SPD spec has not the burst length byte
+ * but DDR3 spec has nature BL8 and BC4,
+ * BL8 -bit3, BC4 -bit2
+ */
+ pdimm->burst_lengths_bitmask = 0x0c;
+ pdimm->row_density = __ilog2(pdimm->rank_density);
+
+ /* MTB - medium timebase
+ * The unit in the SPD spec is ns,
+ * We convert it to ps.
+ * eg: MTB = 0.125ns (125ps)
+ */
+ mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
+ pdimm->mtb_ps = mtb_ps;
+
+ /*
+ * sdram minimum cycle time
+ * we assume the MTB is 0.125ns
+ * eg:
+ * tCK_min=15 MTB (1.875ns) ->DDR3-1066
+ * =12 MTB (1.5ns) ->DDR3-1333
+ * =10 MTB (1.25ns) ->DDR3-1600
+ */
+ pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
+
+ /*
+ * CAS latency supported
+ * bit4 - CL4
+ * bit5 - CL5
+ * bit18 - CL18
+ */
+ pdimm->caslat_X = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
+
+ /*
+ * min CAS latency time
+ * eg: tAA_min =
+ * DDR3-800D 100 MTB (12.5ns)
+ * DDR3-1066F 105 MTB (13.125ns)
+ * DDR3-1333H 108 MTB (13.5ns)
+ * DDR3-1600H 90 MTB (11.25ns)
+ */
+ pdimm->tAA_ps = spd->tAA_min * mtb_ps;
+
+ /*
+ * min write recovery time
+ * eg:
+ * tWR_min = 120 MTB (15ns) -> all speed grades.
+ */
+ pdimm->tWR_ps = spd->tWR_min * mtb_ps;
+
+ /*
+ * min RAS to CAS delay time
+ * eg: tRCD_min =
+ * DDR3-800 100 MTB (12.5ns)
+ * DDR3-1066F 105 MTB (13.125ns)
+ * DDR3-1333H 108 MTB (13.5ns)
+ * DDR3-1600H 90 MTB (11.25)
+ */
+ pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
+
+ /*
+ * min row active to row active delay time
+ * eg: tRRD_min =
+ * DDR3-800(1KB page) 80 MTB (10ns)
+ * DDR3-1333(1KB page) 48 MTB (6ns)
+ */
+ pdimm->tRRD_ps = spd->tRRD_min * mtb_ps;
+
+ /*
+ * min row precharge delay time
+ * eg: tRP_min =
+ * DDR3-800D 100 MTB (12.5ns)
+ * DDR3-1066F 105 MTB (13.125ns)
+ * DDR3-1333H 108 MTB (13.5ns)
+ * DDR3-1600H 90 MTB (11.25ns)
+ */
+ pdimm->tRP_ps = spd->tRP_min * mtb_ps;
+
+ /* min active to precharge delay time
+ * eg: tRAS_min =
+ * DDR3-800D 300 MTB (37.5ns)
+ * DDR3-1066F 300 MTB (37.5ns)
+ * DDR3-1333H 288 MTB (36ns)
+ * DDR3-1600H 280 MTB (35ns)
+ */
+ pdimm->tRAS_ps = (((spd->tRAS_tRC_ext & 0xf) << 8) | spd->tRAS_min_lsb)
+ * mtb_ps;
+ /*
+ * min active to actice/refresh delay time
+ * eg: tRC_min =
+ * DDR3-800D 400 MTB (50ns)
+ * DDR3-1066F 405 MTB (50.625ns)
+ * DDR3-1333H 396 MTB (49.5ns)
+ * DDR3-1600H 370 MTB (46.25ns)
+ */
+ pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
+ * mtb_ps;
+ /*
+ * min refresh recovery delay time
+ * eg: tRFC_min =
+ * 512Mb 720 MTB (90ns)
+ * 1Gb 880 MTB (110ns)
+ * 2Gb 1280 MTB (160ns)
+ */
+ pdimm->tRFC_ps = ((spd->tRFC_min_msb << 8) | spd->tRFC_min_lsb)
+ * mtb_ps;
+ /*
+ * min internal write to read command delay time
+ * eg: tWTR_min = 40 MTB (7.5ns) - all speed bins.
+ * tWRT is at least 4 mclk independent of operating freq.
+ */
+ pdimm->tWTR_ps = spd->tWTR_min * mtb_ps;
+
+ /*
+ * min internal read to precharge command delay time
+ * eg: tRTP_min = 40 MTB (7.5ns) - all speed bins.
+ * tRTP is at least 4 mclk independent of operating freq.
+ */
+ pdimm->tRTP_ps = spd->tRTP_min * mtb_ps;
+
+ /*
+ * Average periodic refresh interval
+ * tREFI = 7.8 us at normal temperature range
+ * = 3.9 us at ext temperature range
+ */
+ pdimm->refresh_rate_ps = 7800000;
+
+ /*
+ * min four active window delay time
+ * eg: tFAW_min =
+ * DDR3-800(1KB page) 320 MTB (40ns)
+ * DDR3-1066(1KB page) 300 MTB (37.5ns)
+ * DDR3-1333(1KB page) 240 MTB (30ns)
+ * DDR3-1600(1KB page) 240 MTB (30ns)
+ */
+ pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
+ * mtb_ps;
+
+ /*
+ * We need check the address mirror for unbuffered DIMM
+ * If SPD indicate the address map mirror, The DDR controller
+ * need care it.
+ */
+ if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
+ (spd->module_type == SPD_MODULETYPE_SODIMM) ||
+ (spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
+ (spd->module_type == SPD_MODULETYPE_MINIUDIMM))
+ pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+unsigned int
+compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
+ common_timing_params_t *outpdimm,
+ unsigned int number_of_dimms)
+{
+ unsigned int i;
+ unsigned int tAAmin_ps = 0;
+ unsigned int tCKmin_X_ps = 0;
+ unsigned int common_caslat;
+ unsigned int caslat_actual;
+ unsigned int retry = 16;
+ unsigned int tmp;
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+
+ /* compute the common CAS latency supported between slots */
+ tmp = dimm_params[0].caslat_X;
+ for (i = 1; i < number_of_dimms; i++)
+ tmp &= dimm_params[i].caslat_X;
+ common_caslat = tmp;
+
+ /* compute the max tAAmin tCKmin between slots */
+ for (i = 0; i < number_of_dimms; i++) {
+ tAAmin_ps = max(tAAmin_ps, dimm_params[i].tAA_ps);
+ tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
+ }
+ /* validate if the memory clk is in the range of dimms */
+ if (mclk_ps < tCKmin_X_ps) {
+ printf("The DIMM max tCKmin is %d ps,"
+ "doesn't support the MCLK cycle %d ps\n",
+ tCKmin_X_ps, mclk_ps);
+ return 1;
+ }
+ /* determine the acutal cas latency */
+ caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
+ /* check if the dimms support the CAS latency */
+ while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
+ caslat_actual++;
+ retry--;
+ }
+ /* once the caculation of caslat_actual is completed
+ * we must verify that this CAS latency value does not
+ * exceed tAAmax, which is 20 ns for all DDR3 speed grades
+ */
+ if (caslat_actual * mclk_ps > 20000) {
+ printf("The choosen cas latency %d is too large\n",
+ caslat_actual);
+ return 1;
+ }
+ outpdimm->lowest_common_SPD_caslat = caslat_actual;
+
+ return 0;
+}
+
+/*
+ * compute_lowest_common_dimm_parameters()
+ *
+ * Determine the worst-case DIMM timing parameters from the set of DIMMs
+ * whose parameters have been computed into the array pointed to
+ * by dimm_params.
+ */
+unsigned int
+compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+ common_timing_params_t *outpdimm,
+ unsigned int number_of_dimms)
+{
+ unsigned int i;
+
+ unsigned int tCKmin_X_ps = 0;
+ unsigned int tCKmax_ps = 0xFFFFFFFF;
+ unsigned int tCKmax_max_ps = 0;
+ unsigned int tRCD_ps = 0;
+ unsigned int tRP_ps = 0;
+ unsigned int tRAS_ps = 0;
+ unsigned int tWR_ps = 0;
+ unsigned int tWTR_ps = 0;
+ unsigned int tRFC_ps = 0;
+ unsigned int tRRD_ps = 0;
+ unsigned int tRC_ps = 0;
+ unsigned int refresh_rate_ps = 0;
+ unsigned int tIS_ps = 0;
+ unsigned int tIH_ps = 0;
+ unsigned int tDS_ps = 0;
+ unsigned int tDH_ps = 0;
+ unsigned int tRTP_ps = 0;
+ unsigned int tDQSQ_max_ps = 0;
+ unsigned int tQHS_ps = 0;
+
+ unsigned int temp1, temp2;
+ unsigned int additive_latency = 0;
+#if !defined(CONFIG_FSL_DDR3)
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+ unsigned int lowest_good_caslat;
+ unsigned int not_ok;
+
+ debug("using mclk_ps = %u\n", mclk_ps);
+#endif
+
+ temp1 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ /*
+ * If there are no ranks on this DIMM,
+ * it probably doesn't exist, so skip it.
+ */
+ if (dimm_params[i].n_ranks == 0) {
+ temp1++;
+ continue;
+ }
+
+ /*
+ * Find minimum tCKmax_ps to find fastest slow speed,
+ * i.e., this is the slowest the whole system can go.
+ */
+ tCKmax_ps = min(tCKmax_ps, dimm_params[i].tCKmax_ps);
+
+ /* Either find maximum value to determine slowest
+ * speed, delay, time, period, etc */
+ tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
+ tCKmax_max_ps = max(tCKmax_max_ps, dimm_params[i].tCKmax_ps);
+ tRCD_ps = max(tRCD_ps, dimm_params[i].tRCD_ps);
+ tRP_ps = max(tRP_ps, dimm_params[i].tRP_ps);
+ tRAS_ps = max(tRAS_ps, dimm_params[i].tRAS_ps);
+ tWR_ps = max(tWR_ps, dimm_params[i].tWR_ps);
+ tWTR_ps = max(tWTR_ps, dimm_params[i].tWTR_ps);
+ tRFC_ps = max(tRFC_ps, dimm_params[i].tRFC_ps);
+ tRRD_ps = max(tRRD_ps, dimm_params[i].tRRD_ps);
+ tRC_ps = max(tRC_ps, dimm_params[i].tRC_ps);
+ tIS_ps = max(tIS_ps, dimm_params[i].tIS_ps);
+ tIH_ps = max(tIH_ps, dimm_params[i].tIH_ps);
+ tDS_ps = max(tDS_ps, dimm_params[i].tDS_ps);
+ tDH_ps = max(tDH_ps, dimm_params[i].tDH_ps);
+ tRTP_ps = max(tRTP_ps, dimm_params[i].tRTP_ps);
+ tQHS_ps = max(tQHS_ps, dimm_params[i].tQHS_ps);
+ refresh_rate_ps = max(refresh_rate_ps,
+ dimm_params[i].refresh_rate_ps);
+
+ /*
+ * Find maximum tDQSQ_max_ps to find slowest.
+ *
+ * FIXME: is finding the slowest value the correct
+ * strategy for this parameter?
+ */
+ tDQSQ_max_ps = max(tDQSQ_max_ps, dimm_params[i].tDQSQ_max_ps);
+ }
+
+ outpdimm->ndimms_present = number_of_dimms - temp1;
+
+ if (temp1 == number_of_dimms) {
+ debug("no dimms this memory controller\n");
+ return 0;
+ }
+
+ outpdimm->tCKmin_X_ps = tCKmin_X_ps;
+ outpdimm->tCKmax_ps = tCKmax_ps;
+ outpdimm->tCKmax_max_ps = tCKmax_max_ps;
+ outpdimm->tRCD_ps = tRCD_ps;
+ outpdimm->tRP_ps = tRP_ps;
+ outpdimm->tRAS_ps = tRAS_ps;
+ outpdimm->tWR_ps = tWR_ps;
+ outpdimm->tWTR_ps = tWTR_ps;
+ outpdimm->tRFC_ps = tRFC_ps;
+ outpdimm->tRRD_ps = tRRD_ps;
+ outpdimm->tRC_ps = tRC_ps;
+ outpdimm->refresh_rate_ps = refresh_rate_ps;
+ outpdimm->tIS_ps = tIS_ps;
+ outpdimm->tIH_ps = tIH_ps;
+ outpdimm->tDS_ps = tDS_ps;
+ outpdimm->tDH_ps = tDH_ps;
+ outpdimm->tRTP_ps = tRTP_ps;
+ outpdimm->tDQSQ_max_ps = tDQSQ_max_ps;
+ outpdimm->tQHS_ps = tQHS_ps;
+
+ /* Determine common burst length for all DIMMs. */
+ temp1 = 0xff;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ temp1 &= dimm_params[i].burst_lengths_bitmask;
+ }
+ }
+ outpdimm->all_DIMMs_burst_lengths_bitmask = temp1;
+
+ /* Determine if all DIMMs registered buffered. */
+ temp1 = temp2 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ if (dimm_params[i].registered_dimm)
+ temp1 = 1;
+ if (!dimm_params[i].registered_dimm)
+ temp2 = 1;
+ }
+ }
+
+ outpdimm->all_DIMMs_registered = 0;
+ if (temp1 && !temp2) {
+ outpdimm->all_DIMMs_registered = 1;
+ }
+
+ outpdimm->all_DIMMs_unbuffered = 0;
+ if (!temp1 && temp2) {
+ outpdimm->all_DIMMs_unbuffered = 1;
+ }
+
+ /* CHECKME: */
+ if (!outpdimm->all_DIMMs_registered
+ && !outpdimm->all_DIMMs_unbuffered) {
+ printf("ERROR: Mix of registered buffered and unbuffered "
+ "DIMMs detected!\n");
+ }
+
+#if defined(CONFIG_FSL_DDR3)
+ if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
+ return 1;
+#else
+ /*
+ * Compute a CAS latency suitable for all DIMMs
+ *
+ * Strategy for SPD-defined latencies: compute only
+ * CAS latency defined by all DIMMs.
+ */
+
+ /*
+ * Step 1: find CAS latency common to all DIMMs using bitwise
+ * operation.
+ */
+ temp1 = 0xFF;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ temp2 = 0;
+ temp2 |= 1 << dimm_params[i].caslat_X;
+ temp2 |= 1 << dimm_params[i].caslat_X_minus_1;
+ temp2 |= 1 << dimm_params[i].caslat_X_minus_2;
+ /*
+ * FIXME: If there was no entry for X-2 (X-1) in
+ * the SPD, then caslat_X_minus_2
+ * (caslat_X_minus_1) contains either 255 or
+ * 0xFFFFFFFF because that's what the glorious
+ * __ilog2 function returns for an input of 0.
+ * On 32-bit PowerPC, left shift counts with bit
+ * 26 set (that the value of 255 or 0xFFFFFFFF
+ * will have), cause the destination register to
+ * be 0. That is why this works.
+ */
+ temp1 &= temp2;
+ }
+ }
+
+ /*
+ * Step 2: check each common CAS latency against tCK of each
+ * DIMM's SPD.
+ */
+ lowest_good_caslat = 0;
+ temp2 = 0;
+ while (temp1) {
+ not_ok = 0;
+ temp2 = __ilog2(temp1);
+ debug("checking common caslat = %u\n", temp2);
+
+ /* Check if this CAS latency will work on all DIMMs at tCK. */
+ for (i = 0; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks) {
+ continue;
+ }
+ if (dimm_params[i].caslat_X == temp2) {
+ if (mclk_ps >= dimm_params[i].tCKmin_X_ps) {
+ debug("CL = %u ok on DIMM %u at tCK=%u"
+ " ps with its tCKmin_X_ps of %u\n",
+ temp2, i, mclk_ps,
+ dimm_params[i].tCKmin_X_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+
+ if (dimm_params[i].caslat_X_minus_1 == temp2) {
+ unsigned int tCKmin_X_minus_1_ps
+ = dimm_params[i].tCKmin_X_minus_1_ps;
+ if (mclk_ps >= tCKmin_X_minus_1_ps) {
+ debug("CL = %u ok on DIMM %u at "
+ "tCK=%u ps with its "
+ "tCKmin_X_minus_1_ps of %u\n",
+ temp2, i, mclk_ps,
+ tCKmin_X_minus_1_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+
+ if (dimm_params[i].caslat_X_minus_2 == temp2) {
+ unsigned int tCKmin_X_minus_2_ps
+ = dimm_params[i].tCKmin_X_minus_2_ps;
+ if (mclk_ps >= tCKmin_X_minus_2_ps) {
+ debug("CL = %u ok on DIMM %u at "
+ "tCK=%u ps with its "
+ "tCKmin_X_minus_2_ps of %u\n",
+ temp2, i, mclk_ps,
+ tCKmin_X_minus_2_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+ }
+
+ if (!not_ok) {
+ lowest_good_caslat = temp2;
+ }
+
+ temp1 &= ~(1 << temp2);
+ }
+
+ debug("lowest common SPD-defined CAS latency = %u\n",
+ lowest_good_caslat);
+ outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
+
+
+ /*
+ * Compute a common 'de-rated' CAS latency.
+ *
+ * The strategy here is to find the *highest* dereated cas latency
+ * with the assumption that all of the DIMMs will support a dereated
+ * CAS latency higher than or equal to their lowest dereated value.
+ */
+ temp1 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
+ }
+ outpdimm->highest_common_derated_caslat = temp1;
+ debug("highest common dereated CAS latency = %u\n", temp1);
+#endif /* #if defined(CONFIG_FSL_DDR3) */
+
+ /* Determine if all DIMMs ECC capable. */
+ temp1 = 1;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks && dimm_params[i].edc_config != 2) {
+ temp1 = 0;
+ break;
+ }
+ }
+ if (temp1) {
+ debug("all DIMMs ECC capable\n");
+ } else {
+ debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
+ }
+ outpdimm->all_DIMMs_ECC_capable = temp1;
+
+#ifndef CONFIG_FSL_DDR3
+ /* FIXME: move to somewhere else to validate. */
+ if (mclk_ps > tCKmax_max_ps) {
+ printf("Warning: some of the installed DIMMs "
+ "can not operate this slowly.\n");
+ return 1;
+ }
+#endif
+ /*
+ * Compute additive latency.
+ *
+ * For DDR1, additive latency should be 0.
+ *
+ * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
+ * which comes from Trcd, and also note that:
+ * add_lat + caslat must be >= 4
+ *
+ * For DDR3, we use the AL=0
+ *
+ * When to use additive latency for DDR2:
+ *
+ * I. Because you are using CL=3 and need to do ODT on writes and
+ * want functionality.
+ * 1. Are you going to use ODT? (Does your board not have
+ * additional termination circuitry for DQ, DQS, DQS_,
+ * DM, RDQS, RDQS_ for x4/x8 configs?)
+ * 2. If so, is your lowest supported CL going to be 3?
+ * 3. If so, then you must set AL=1 because
+ *
+ * WL >= 3 for ODT on writes
+ * RL = AL + CL
+ * WL = RL - 1
+ * ->
+ * WL = AL + CL - 1
+ * AL + CL - 1 >= 3
+ * AL + CL >= 4
+ * QED
+ *
+ * RL >= 3 for ODT on reads
+ * RL = AL + CL
+ *
+ * Since CL aren't usually less than 2, AL=0 is a minimum,
+ * so the WL-derived AL should be the -- FIXME?
+ *
+ * II. Because you are using auto-precharge globally and want to
+ * use additive latency (posted CAS) to get more bandwidth.
+ * 1. Are you going to use auto-precharge mode globally?
+ *
+ * Use addtivie latency and compute AL to be 1 cycle less than
+ * tRCD, i.e. the READ or WRITE command is in the cycle
+ * immediately following the ACTIVATE command..
+ *
+ * III. Because you feel like it or want to do some sort of
+ * degraded-performance experiment.
+ * 1. Do you just want to use additive latency because you feel
+ * like it?
+ *
+ * Validation: AL is less than tRCD, and within the other
+ * read-to-precharge constraints.
+ */
+
+ additive_latency = 0;
+
+#if defined(CONFIG_FSL_DDR2)
+ if (lowest_good_caslat < 4) {
+ additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
+ if (mclk_to_picos(additive_latency) > tRCD_ps) {
+ additive_latency = picos_to_mclk(tRCD_ps);
+ debug("setting additive_latency to %u because it was "
+ " greater than tRCD_ps\n", additive_latency);
+ }
+ }
+
+#elif defined(CONFIG_FSL_DDR3)
+ /*
+ * The system will not use the global auto-precharge mode.
+ * However, it uses the page mode, so we set AL=0
+ */
+ additive_latency = 0;
+#endif
+
+ /*
+ * Validate additive latency
+ * FIXME: move to somewhere else to validate
+ *
+ * AL <= tRCD(min)
+ */
+ if (mclk_to_picos(additive_latency) > tRCD_ps) {
+ printf("Error: invalid additive latency exceeds tRCD(min).\n");
+ return 1;
+ }
+
+ /*
+ * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
+ * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
+ * ADD_LAT (the register) must be set to a value less
+ * than ACTTORW if WL = 1, then AL must be set to 1
+ * RD_TO_PRE (the register) must be set to a minimum
+ * tRTP + AL if AL is nonzero
+ */
+
+ /*
+ * Additive latency will be applied only if the memctl option to
+ * use it.
+ */
+ outpdimm->additive_latency = additive_latency;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+extern void fsl_ddr_set_lawbar(
+ const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num);
+
+/* processor specific function */
+extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num);
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+ unsigned int ctrl_num);
+
+/*
+ * ASSUMPTIONS:
+ * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
+ * - Same memory data bus width on all controllers
+ *
+ * NOTES:
+ *
+ * The memory controller and associated documentation use confusing
+ * terminology when referring to the orgranization of DRAM.
+ *
+ * Here is a terminology translation table:
+ *
+ * memory controller/documention |industry |this code |signals
+ * -------------------------------|-----------|-----------|-----------------
+ * physical bank/bank |rank |rank |chip select (CS)
+ * logical bank/sub-bank |bank |bank |bank address (BA)
+ * page/row |row |page |row address
+ * ??? |column |column |column address
+ *
+ * The naming confusion is further exacerbated by the descriptions of the
+ * memory controller interleaving feature, where accesses are interleaved
+ * _BETWEEN_ two seperate memory controllers. This is configured only in
+ * CS0_CONFIG[INTLV_CTL] of each memory controller.
+ *
+ * memory controller documentation | number of chip selects
+ * | per memory controller supported
+ * --------------------------------|-----------------------------------------
+ * cache line interleaving | 1 (CS0 only)
+ * page interleaving | 1 (CS0 only)
+ * bank interleaving | 1 (CS0 only)
+ * superbank interleraving | depends on bank (chip select)
+ * | interleraving [rank interleaving]
+ * | mode used on every memory controller
+ *
+ * Even further confusing is the existence of the interleaving feature
+ * _WITHIN_ each memory controller. The feature is referred to in
+ * documentation as chip select interleaving or bank interleaving,
+ * although it is configured in the DDR_SDRAM_CFG field.
+ *
+ * Name of field | documentation name | this code
+ * -----------------------------|-----------------------|------------------
+ * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving
+ * | interleaving
+ */
+
+#ifdef DEBUG
+const char *step_string_tbl[] = {
+ "STEP_GET_SPD",
+ "STEP_COMPUTE_DIMM_PARMS",
+ "STEP_COMPUTE_COMMON_PARMS",
+ "STEP_GATHER_OPTS",
+ "STEP_ASSIGN_ADDRESSES",
+ "STEP_COMPUTE_REGS",
+ "STEP_PROGRAM_REGS",
+ "STEP_ALL"
+};
+
+const char * step_to_string(unsigned int step) {
+
+ unsigned int s = __ilog2(step);
+
+ if ((1 << s) != step)
+ return step_string_tbl[7];
+
+ return step_string_tbl[s];
+}
+#endif
+
+int step_assign_addresses(fsl_ddr_info_t *pinfo,
+ unsigned int dbw_cap_adj[],
+ unsigned int *memctl_interleaving,
+ unsigned int *rank_interleaving)
+{
+ int i, j;
+
+ /*
+ * If a reduced data width is requested, but the SPD
+ * specifies a physically wider device, adjust the
+ * computed dimm capacities accordingly before
+ * assigning addresses.
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ unsigned int found = 0;
+
+ switch (pinfo->memctl_opts[i].data_bus_width) {
+ case 2:
+ /* 16-bit */
+ printf("can't handle 16-bit mode yet\n");
+ break;
+
+ case 1:
+ /* 32-bit */
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned int dw;
+ dw = pinfo->dimm_params[i][j].data_width;
+ if (pinfo->dimm_params[i][j].n_ranks
+ && (dw == 72 || dw == 64)) {
+ /*
+ * FIXME: can't really do it
+ * like this because this just
+ * further reduces the memory
+ */
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbw_cap_adj[i] = 1;
+ }
+ break;
+
+ case 0:
+ /* 64-bit */
+ break;
+
+ default:
+ printf("unexpected data bus width "
+ "specified controller %u\n", i);
+ return 1;
+ }
+ }
+
+ /*
+ * Check if all controllers are configured for memory
+ * controller interleaving.
+ */
+ j = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (pinfo->memctl_opts[i].memctl_interleaving) {
+ j++;
+ }
+ }
+ if (j == 2)
+ *memctl_interleaving = 1;
+
+ /* Check that all controllers are rank interleaving. */
+ j = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (pinfo->memctl_opts[i].ba_intlv_ctl) {
+ j++;
+ }
+ }
+ if (j == 2)
+ *rank_interleaving = 1;
+
+ if (*memctl_interleaving) {
+ unsigned long long addr, total_mem_per_ctlr = 0;
+ /*
+ * If interleaving between memory controllers,
+ * make each controller start at a base address
+ * of 0.
+ *
+ * Also, if bank interleaving (chip select
+ * interleaving) is enabled on each memory
+ * controller, CS0 needs to be programmed to
+ * cover the entire memory range on that memory
+ * controller
+ *
+ * Bank interleaving also implies that each
+ * addressed chip select is identical in size.
+ */
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ addr = 0;
+ pinfo->common_timing_params[i].base_address = 0ull;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned long long cap
+ = pinfo->dimm_params[i][j].capacity;
+
+ pinfo->dimm_params[i][j].base_address = addr;
+ addr += cap >> dbw_cap_adj[i];
+ total_mem_per_ctlr += cap >> dbw_cap_adj[i];
+ }
+ }
+ pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
+ } else {
+ /*
+ * Simple linear assignment if memory
+ * controllers are not interleaved.
+ */
+ unsigned long long cur_memsize = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ u64 total_mem_per_ctlr = 0;
+ pinfo->common_timing_params[i].base_address =
+ cur_memsize;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ /* Compute DIMM base addresses. */
+ unsigned long long cap =
+ pinfo->dimm_params[i][j].capacity;
+ pinfo->dimm_params[i][j].base_address =
+ cur_memsize;
+ cur_memsize += cap >> dbw_cap_adj[i];
+ total_mem_per_ctlr += cap >> dbw_cap_adj[i];
+ }
+ pinfo->common_timing_params[i].total_mem =
+ total_mem_per_ctlr;
+ }
+ }
+
+ return 0;
+}
+
+unsigned long long
+fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
+{
+ unsigned int i, j;
+ unsigned int all_controllers_memctl_interleaving = 0;
+ unsigned int all_controllers_rank_interleaving = 0;
+ unsigned long long total_mem = 0;
+
+ fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
+ common_timing_params_t *timing_params = pinfo->common_timing_params;
+
+ /* data bus width capacity adjust shift amount */
+ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ dbw_capacity_adjust[i] = 0;
+ }
+
+ debug("starting at step %u (%s)\n",
+ start_step, step_to_string(start_step));
+
+ switch (start_step) {
+ case STEP_GET_SPD:
+ /* STEP 1: Gather all DIMM SPD data */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
+ }
+
+ case STEP_COMPUTE_DIMM_PARMS:
+ /* STEP 2: Compute DIMM parameters from SPD data */
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned int retval;
+ generic_spd_eeprom_t *spd =
+ &(pinfo->spd_installed_dimms[i][j]);
+ dimm_params_t *pdimm =
+ &(pinfo->dimm_params[i][j]);
+
+ retval = compute_dimm_parameters(spd, pdimm, i);
+ if (retval == 2) {
+ printf("Error: compute_dimm_parameters"
+ " non-zero returned FATAL value "
+ "for memctl=%u dimm=%u\n", i, j);
+ return 0;
+ }
+ if (retval) {
+ debug("Warning: compute_dimm_parameters"
+ " non-zero return value for memctl=%u "
+ "dimm=%u\n", i, j);
+ }
+ }
+ }
+
+ case STEP_COMPUTE_COMMON_PARMS:
+ /*
+ * STEP 3: Compute a common set of timing parameters
+ * suitable for all of the DIMMs on each memory controller
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Computing lowest common DIMM"
+ " parameters for memctl=%u\n", i);
+ compute_lowest_common_dimm_parameters(
+ pinfo->dimm_params[i],
+ &timing_params[i],
+ CONFIG_DIMM_SLOTS_PER_CTLR);
+ }
+
+ case STEP_GATHER_OPTS:
+ /* STEP 4: Gather configuration requirements from user */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Reloading memory controller "
+ "configuration options for memctl=%u\n", i);
+ /*
+ * This "reloads" the memory controller options
+ * to defaults. If the user "edits" an option,
+ * next_step points to the step after this,
+ * which is currently STEP_ASSIGN_ADDRESSES.
+ */
+ populate_memctl_options(
+ timing_params[i].all_DIMMs_registered,
+ &pinfo->memctl_opts[i],
+ pinfo->dimm_params[i], i);
+ }
+
+ case STEP_ASSIGN_ADDRESSES:
+ /* STEP 5: Assign addresses to chip selects */
+ step_assign_addresses(pinfo,
+ dbw_capacity_adjust,
+ &all_controllers_memctl_interleaving,
+ &all_controllers_rank_interleaving);
+
+ case STEP_COMPUTE_REGS:
+ /* STEP 6: compute controller register values */
+ debug("FSL Memory ctrl cg register computation\n");
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (timing_params[i].ndimms_present == 0) {
+ memset(&ddr_reg[i], 0,
+ sizeof(fsl_ddr_cfg_regs_t));
+ continue;
+ }
+
+ compute_fsl_memctl_config_regs(
+ &pinfo->memctl_opts[i],
+ &ddr_reg[i], &timing_params[i],
+ pinfo->dimm_params[i],
+ dbw_capacity_adjust[i]);
+ }
+
+ default:
+ break;
+ }
+
+ /* Compute the total amount of memory. */
+
+ /*
+ * If bank interleaving but NOT memory controller interleaving
+ * CS_BNDS describe the quantity of memory on each memory
+ * controller, so the total is the sum across.
+ */
+ if (!all_controllers_memctl_interleaving
+ && all_controllers_rank_interleaving) {
+ total_mem = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ total_mem += timing_params[i].total_mem;
+ }
+
+ } else {
+ /*
+ * Compute the amount of memory available just by
+ * looking for the highest valid CSn_BNDS value.
+ * This allows us to also experiment with using
+ * only CS0 when using dual-rank DIMMs.
+ */
+ unsigned int max_end = 0;
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
+ fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
+ if (reg->cs[j].config & 0x80000000) {
+ unsigned int end;
+ end = reg->cs[j].bnds & 0xFFF;
+ if (end > max_end) {
+ max_end = end;
+ }
+ }
+ }
+ }
+
+ total_mem = 1 + (((unsigned long long)max_end << 24ULL)
+ | 0xFFFFFFULL);
+ }
+
+ return total_mem;
+}
+
+/*
+ * fsl_ddr_sdram() -- this is the main function to be called by
+ * initdram() in the board file.
+ *
+ * It returns amount of memory configured in bytes.
+ */
+phys_size_t fsl_ddr_sdram(void)
+{
+ unsigned int i;
+ unsigned int memctl_interleaved;
+ unsigned long long total_memory;
+ fsl_ddr_info_t info;
+
+ /* Reset info structure. */
+ memset(&info, 0, sizeof(fsl_ddr_info_t));
+
+ /* Compute it once normally. */
+ total_memory = fsl_ddr_compute(&info, STEP_GET_SPD);
+
+ /* Check for memory controller interleaving. */
+ memctl_interleaved = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ memctl_interleaved +=
+ info.memctl_opts[i].memctl_interleaving;
+ }
+
+ if (memctl_interleaved) {
+ if (memctl_interleaved == CONFIG_NUM_DDR_CONTROLLERS) {
+ debug("memctl interleaving\n");
+ /*
+ * Change the meaning of memctl_interleaved
+ * to be "boolean".
+ */
+ memctl_interleaved = 1;
+ } else {
+ printf("Warning: memctl interleaving not "
+ "properly configured on all controllers\n");
+ memctl_interleaved = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+ info.memctl_opts[i].memctl_interleaving = 0;
+ debug("Recomputing with memctl_interleaving off.\n");
+ total_memory = fsl_ddr_compute(&info,
+ STEP_ASSIGN_ADDRESSES);
+ }
+ }
+
+ /* Program configuration registers. */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Programming controller %u\n", i);
+ if (info.common_timing_params[i].ndimms_present == 0) {
+ debug("No dimms present on controller %u; "
+ "skipping programming\n", i);
+ continue;
+ }
+
+ fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i);
+ }
+
+ if (memctl_interleaved) {
+ const unsigned int ctrl_num = 0;
+
+ /* Only set LAWBAR1 if memory controller interleaving is on. */
+ fsl_ddr_set_lawbar(&info.common_timing_params[0],
+ memctl_interleaved, ctrl_num);
+ } else {
+ /*
+ * Memory controller interleaving is NOT on;
+ * set each lawbar individually.
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ 0, i);
+ }
+ }
+
+ debug("total_memory = %llu\n", total_memory);
+
+#if !defined(CONFIG_PHYS_64BIT)
+ /* Check for 4G or more. Bad. */
+ if (total_memory >= (1ull << 32)) {
+ printf("Detected %lld MB of memory\n", total_memory >> 20);
+ printf("This U-Boot only supports < 4G of DDR\n");
+ printf("You could rebuild it with CONFIG_PHYS_64BIT\n");
+ total_memory = CONFIG_MAX_MEM_MAPPED;
+ }
+#endif
+
+ return total_memory;
+}
--- /dev/null
+/*
+ * Copyright 2008, 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num);
+
+unsigned int populate_memctl_options(int all_DIMMs_registered,
+ memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ const char *p;
+
+ /* Chip select options. */
+
+ /* Pick chip-select local options. */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ /* If not DDR2, odt_rd_cfg and odt_wr_cfg need to be 0. */
+
+ /* only for single CS? */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+
+ popts->cs_local_opts[i].odt_wr_cfg = 1;
+ popts->cs_local_opts[i].auto_precharge = 0;
+ }
+
+ /* Pick interleaving mode. */
+
+ /*
+ * 0 = no interleaving
+ * 1 = interleaving between 2 controllers
+ */
+ popts->memctl_interleaving = 0;
+
+ /*
+ * 0 = cacheline
+ * 1 = page
+ * 2 = (logical) bank
+ * 3 = superbank (only if CS interleaving is enabled)
+ */
+ popts->memctl_interleaving_mode = 0;
+
+ /*
+ * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
+ * 1: page: bit to the left of the column bits selects the memctl
+ * 2: bank: bit to the left of the bank bits selects the memctl
+ * 3: superbank: bit to the left of the chip select selects the memctl
+ *
+ * NOTE: ba_intlv (rank interleaving) is independent of memory
+ * controller interleaving; it is only within a memory controller.
+ * Must use superbank interleaving if rank interleaving is used and
+ * memory controller interleaving is enabled.
+ */
+
+ /*
+ * 0 = no
+ * 0x40 = CS0,CS1
+ * 0x20 = CS2,CS3
+ * 0x60 = CS0,CS1 + CS2,CS3
+ * 0x04 = CS0,CS1,CS2,CS3
+ */
+ popts->ba_intlv_ctl = 0;
+
+ /* Memory Organization Parameters */
+ popts->registered_dimm_en = all_DIMMs_registered;
+
+ /* Operational Mode Paramters */
+
+ /* Pick ECC modes */
+#ifdef CONFIG_DDR_ECC
+ popts->ECC_mode = 1; /* 0 = disabled, 1 = enabled */
+#else
+ popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */
+#endif
+ popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
+
+ /*
+ * Choose DQS config
+ * 0 for DDR1
+ * 1 for DDR2
+ */
+#if defined(CONFIG_FSL_DDR1)
+ popts->DQS_config = 0;
+#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
+ popts->DQS_config = 1;
+#endif
+
+ /* Choose self-refresh during sleep. */
+ popts->self_refresh_in_sleep = 1;
+
+ /* Choose dynamic power management mode. */
+ popts->dynamic_power = 0;
+
+ /* 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */
+ popts->data_bus_width = 0;
+
+ /* Choose burst length. */
+#if defined(CONFIG_FSL_DDR3)
+#if defined(CONFIG_E500MC)
+ popts->OTF_burst_chop_en = 0; /* on-the-fly burst chop disable */
+ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
+#else
+ popts->OTF_burst_chop_en = 1; /* on-the-fly burst chop */
+ popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
+#endif
+#else
+ popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
+#endif
+
+ /* Choose ddr controller address mirror mode */
+#if defined(CONFIG_FSL_DDR3)
+ popts->mirrored_dimm = pdimm[0].mirrored_dimm;
+#endif
+
+ /* Global Timing Parameters. */
+ debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
+
+ /* Pick a caslat override. */
+ popts->cas_latency_override = 0;
+ popts->cas_latency_override_value = 3;
+ if (popts->cas_latency_override) {
+ debug("using caslat override value = %u\n",
+ popts->cas_latency_override_value);
+ }
+
+ /* Decide whether to use the computed derated latency */
+ popts->use_derated_caslat = 0;
+
+ /* Choose an additive latency. */
+ popts->additive_latency_override = 0;
+ popts->additive_latency_override_value = 3;
+ if (popts->additive_latency_override) {
+ debug("using additive latency override value = %u\n",
+ popts->additive_latency_override_value);
+ }
+
+ /*
+ * 2T_EN setting
+ *
+ * Factors to consider for 2T_EN:
+ * - number of DIMMs installed
+ * - number of components, number of active ranks
+ * - how much time you want to spend playing around
+ */
+ popts->twoT_en = 0;
+ popts->threeT_en = 0;
+
+ /*
+ * BSTTOPRE precharge interval
+ *
+ * Set this to 0 for global auto precharge
+ *
+ * FIXME: Should this be configured in picoseconds?
+ * Why it should be in ps: better understanding of this
+ * relative to actual DRAM timing parameters such as tRAS.
+ * e.g. tRAS(min) = 40 ns
+ */
+ popts->bstopre = 0x100;
+
+ /* Minimum CKE pulse width -- tCKE(MIN) */
+ popts->tCKE_clock_pulse_width_ps
+ = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
+
+ /*
+ * Window for four activates -- tFAW
+ *
+ * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
+ * FIXME: varies depending upon number of column addresses or data
+ * FIXME: width, was considering looking at pdimm->primary_sdram_width
+ */
+#if defined(CONFIG_FSL_DDR1)
+ popts->tFAW_window_four_activates_ps = mclk_to_picos(1);
+
+#elif defined(CONFIG_FSL_DDR2)
+ /*
+ * x4/x8; some datasheets have 35000
+ * x16 wide columns only? Use 50000?
+ */
+ popts->tFAW_window_four_activates_ps = 37500;
+
+#elif defined(CONFIG_FSL_DDR3)
+ popts->tFAW_window_four_activates_ps = pdimm[0].tFAW_ps;
+#endif
+ popts->zq_en = 0;
+ popts->wrlvl_en = 0;
+#if defined(CONFIG_FSL_DDR3)
+ /*
+ * due to ddr3 dimm is fly-by topology
+ * we suggest to enable write leveling to
+ * meet the tQDSS under different loading.
+ */
+ popts->wrlvl_en = 1;
+ popts->wrlvl_override = 0;
+#endif
+
+ /*
+ * Check interleaving configuration from environment.
+ * Please refer to doc/README.fsl-ddr for the detail.
+ *
+ * If memory controller interleaving is enabled, then the data
+ * bus widths must be programmed identically for the 2 memory
+ * controllers.
+ *
+ * XXX: Attempt to set both controllers to the same chip select
+ * interleaving mode. It will do a best effort to get the
+ * requested ranks interleaved together such that the result
+ * should be a subset of the requested configuration.
+ */
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ if ((p = getenv("memctl_intlv_ctl")) != NULL) {
+ if (pdimm[0].n_ranks == 0) {
+ printf("There is no rank on CS0. Because only rank on "
+ "CS0 and ranks chip-select interleaved with CS0"
+ " are controller interleaved, force non memory "
+ "controller interleaving\n");
+ popts->memctl_interleaving = 0;
+ } else {
+ popts->memctl_interleaving = 1;
+ if (strcmp(p, "cacheline") == 0)
+ popts->memctl_interleaving_mode =
+ FSL_DDR_CACHE_LINE_INTERLEAVING;
+ else if (strcmp(p, "page") == 0)
+ popts->memctl_interleaving_mode =
+ FSL_DDR_PAGE_INTERLEAVING;
+ else if (strcmp(p, "bank") == 0)
+ popts->memctl_interleaving_mode =
+ FSL_DDR_BANK_INTERLEAVING;
+ else if (strcmp(p, "superbank") == 0)
+ popts->memctl_interleaving_mode =
+ FSL_DDR_SUPERBANK_INTERLEAVING;
+ else
+ popts->memctl_interleaving_mode =
+ simple_strtoul(p, NULL, 0);
+ }
+ }
+#endif
+
+ if( ((p = getenv("ba_intlv_ctl")) != NULL) &&
+ (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
+ if (strcmp(p, "cs0_cs1") == 0)
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
+ else if (strcmp(p, "cs2_cs3") == 0)
+ popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
+ else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0)
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
+ else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0)
+ popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0);
+
+ switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+ case FSL_DDR_CS0_CS1_CS2_CS3:
+ case FSL_DDR_CS0_CS1:
+ if (pdimm[0].n_ranks != 2) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(chip-select) for "
+ "CS0+CS1, force non-interleaving!\n");
+ }
+ break;
+ case FSL_DDR_CS2_CS3:
+ if (pdimm[1].n_ranks !=2){
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(CS) for CS2+CS3, "
+ "force non-interleaving!\n");
+ }
+ break;
+ case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+ if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) {
+ popts->ba_intlv_ctl = 0;
+ printf("Not enough bank(CS) for CS0+CS1 or "
+ "CS2+CS3, force non-interleaving!\n");
+ }
+ break;
+ default:
+ popts->ba_intlv_ctl = 0;
+ break;
+ }
+ }
+
+ fsl_ddr_board_options(popts, pdimm, ctrl_num);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+
+#include "ddr.h"
+
+unsigned int fsl_ddr_get_mem_data_rate(void);
+
+/*
+ * Round mclk_ps to nearest 10 ps in memory controller code.
+ *
+ * If an imprecise data rate is too high due to rounding error
+ * propagation, compute a suitably rounded mclk_ps to compute
+ * a working memory controller configuration.
+ */
+unsigned int get_memory_clk_period_ps(void)
+{
+ unsigned int mclk_ps;
+
+ mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate();
+ /* round to nearest 10 ps */
+ return 10 * ((mclk_ps + 5) / 10);
+}
+
+/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
+unsigned int picos_to_mclk(unsigned int picos)
+{
+ const unsigned long long ULL_2e12 = 2000000000000ULL;
+ const unsigned long long ULL_8Fs = 0xFFFFFFFFULL;
+ unsigned long long clks;
+ unsigned long long clks_temp;
+
+ if (!picos)
+ return 0;
+
+ clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos;
+ clks_temp = clks;
+ clks = clks / ULL_2e12;
+ if (clks_temp % ULL_2e12) {
+ clks++;
+ }
+
+ if (clks > ULL_8Fs) {
+ clks = ULL_8Fs;
+ }
+
+ return (unsigned int) clks;
+}
+
+unsigned int mclk_to_picos(unsigned int mclk)
+{
+ return get_memory_clk_period_ps() * mclk;
+}
+
+void
+__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num)
+{
+ unsigned long long base = memctl_common_params->base_address;
+ unsigned long long size = memctl_common_params->total_mem;
+
+ /*
+ * If no DIMMs on this controller, do not proceed any further.
+ */
+ if (!memctl_common_params->ndimms_present) {
+ return;
+ }
+
+#if !defined(CONFIG_PHYS_64BIT)
+ if (base >= CONFIG_MAX_MEM_MAPPED)
+ return;
+ if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
+ size = CONFIG_MAX_MEM_MAPPED - base;
+#endif
+
+ if (ctrl_num == 0) {
+ /*
+ * Set up LAW for DDR controller 1 space.
+ */
+ unsigned int lawbar1_target_id = memctl_interleaved
+ ? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
+
+ if (set_ddr_laws(base, size, lawbar1_target_id) < 0) {
+ printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__,
+ memctl_interleaved);
+ return ;
+ }
+ } else if (ctrl_num == 1) {
+ if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) {
+ printf("%s: ERROR (ctrl #1)\n", __func__);
+ return ;
+ }
+ } else {
+ printf("%s: unexpected DDR controller number (%u)\n", __func__,
+ ctrl_num);
+ }
+}
+
+__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
+fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num);
+
+void board_add_ram_info(int use_default)
+{
+#if defined(CONFIG_MPC85xx)
+ volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+#elif defined(CONFIG_MPC86xx)
+ volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ uint32_t cs0_config = in_be32(&ddr->cs0_config);
+#endif
+ uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
+ int cas_lat;
+
+ puts(" (DDR");
+ switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
+ SDRAM_CFG_SDRAM_TYPE_SHIFT) {
+ case SDRAM_TYPE_DDR1:
+ puts("1");
+ break;
+ case SDRAM_TYPE_DDR2:
+ puts("2");
+ break;
+ case SDRAM_TYPE_DDR3:
+ puts("3");
+ break;
+ default:
+ puts("?");
+ break;
+ }
+
+ if (sdram_cfg & SDRAM_CFG_32_BE)
+ puts(", 32-bit");
+ else
+ puts(", 64-bit");
+
+ /* Calculate CAS latency based on timing cfg values */
+ cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
+ if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1)
+ cas_lat += (8 << 1);
+ printf(", CL=%d", cas_lat >> 1);
+ if (cas_lat & 0x1)
+ puts(".5");
+
+ if (sdram_cfg & SDRAM_CFG_ECC_EN)
+ puts(", ECC on)");
+ else
+ puts(", ECC off)");
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ if (cs0_config & 0x20000000) {
+ puts("\n");
+ puts(" DDR Controller Interleaving Mode: ");
+
+ switch ((cs0_config >> 24) & 0xf) {
+ case FSL_DDR_CACHE_LINE_INTERLEAVING:
+ puts("cache line");
+ break;
+ case FSL_DDR_PAGE_INTERLEAVING:
+ puts("page");
+ break;
+ case FSL_DDR_BANK_INTERLEAVING:
+ puts("bank");
+ break;
+ case FSL_DDR_SUPERBANK_INTERLEAVING:
+ puts("super-bank");
+ break;
+ default:
+ puts("invalid");
+ break;
+ }
+ }
+#endif
+
+ if ((sdram_cfg >> 8) & 0x7f) {
+ puts("\n");
+ puts(" DDR Chip-Select Interleaving Mode: ");
+ switch(sdram_cfg >> 8 & 0x7f) {
+ case FSL_DDR_CS0_CS1_CS2_CS3:
+ puts("CS0+CS1+CS2+CS3");
+ break;
+ case FSL_DDR_CS0_CS1:
+ puts("CS0+CS1");
+ break;
+ case FSL_DDR_CS2_CS3:
+ puts("CS2+CS3");
+ break;
+ case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+ puts("CS0+CS1 and CS2+CS3");
+ break;
+ default:
+ puts("invalid");
+ break;
+ }
+ }
+}
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * cpu specific common code for 85xx/86xx processors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_fixup_num_cores(void *blob) {
+ int off, num_cores, del_cores;
+
+ del_cores = 0;
+ num_cores = cpu_numcores();
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+
+ /* if we find a cpu node outside of what we expect delete it
+ * and reset the offset back to the start since we can't
+ * trust the offsets anymore
+ */
+ if (*reg > num_cores-1) {
+ fdt_del_node(blob, off);
+ del_cores++;
+ off = -1;
+ }
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+ debug ("%x core system found\n", num_cores);
+ debug ("deleted %d extra core entry entries from device tree\n",
+ del_cores);
+}
--- /dev/null
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <pci.h>
+
+struct pci_info {
+ u32 cfg;
+};
+
+/* The cfg field is a bit mask in which each bit represents the value of
+ * cfg_IO_ports[] signal and the bit is set if the interface would be
+ * enabled based on the value of cfg_IO_ports[] signal
+ *
+ * On MPC86xx/PQ3 based systems:
+ * we extract cfg_IO_ports from GUTS register PORDEVSR
+ *
+ * cfg_IO_ports only exist on systems w/PCIe (we set cfg 0 for systems
+ * without PCIe)
+ */
+
+#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8560)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI] = {
+ .cfg = 0,
+ },
+};
+#elif defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI] = {
+ .cfg = 0,
+ },
+};
+#elif defined(CONFIG_MPC8536)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI] = {
+ .cfg = 0,
+ },
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 7),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 5) | (1 << 7),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 7),
+ },
+};
+#elif defined(CONFIG_MPC8544)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI] = {
+ .cfg = 0,
+ },
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
+ (1 << 6) | (1 << 7),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 6) | (1 << 7),
+ },
+};
+#elif defined(CONFIG_MPC8548)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI_1] = {
+ .cfg = 0,
+ },
+ [LAW_TRGT_IF_PCI_2] = {
+ .cfg = 0,
+ },
+ /* PCI_2 is always host and we dont use iosel to determine enable/disable */
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 3) | (1 << 4) | (1 << 7),
+ },
+};
+#elif defined(CONFIG_MPC8568)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI] = {
+ .cfg = 0,
+ },
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 3) | (1 << 4) | (1 << 7),
+ },
+};
+#elif defined(CONFIG_MPC8569)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
+ (1 << 8) | (1 << 0xc) | (1 << 0xf),
+ },
+};
+#elif defined(CONFIG_MPC8572)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 2) | (1 << 3) | (1 << 7) |
+ (1 << 0xb) | (1 << 0xc) | (1 << 0xf),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 3) | (1 << 7),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 7),
+ },
+};
+#elif defined(CONFIG_MPC8610)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCI_1] = {
+ .cfg = 0,
+ },
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 1) | (1 << 4),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 0) | (1 << 4),
+ },
+};
+#elif defined(CONFIG_MPC8641)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) |
+ (1 << 7) | (1 << 0xe) | (1 << 0xf),
+ },
+};
+#elif defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
+ defined(CONFIG_P1012) || defined(CONFIG_P1021)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 0) | (1 << 6) | (1 << 0xe) | (1 << 0xf),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 0xe),
+ },
+};
+#elif defined(CONFIG_P1013) || defined(CONFIG_P1022)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xa) |
+ (1 << 0xb) | (1 << 0xd) | (1 << 0xe) |
+ (1 << 0xf) | (1 << 0x15) | (1 << 0x16) |
+ (1 << 0x17) | (1 << 0x18) | (1 << 0x19) |
+ (1 << 0x1a) | (1 << 0x1b) | (1 << 0x1c) |
+ (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) |
+ (1 << 9) | (1 << 0xa) | (1 << 0xb) | (1 << 0xd) |
+ (1 << 0x15) | (1 << 0x16) | (1 << 0x17) |
+ (1 << 0x18) | (1 << 0x1c),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xd) |
+ (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | (1 << 0x18) |
+ (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b),
+ },
+};
+#elif defined(CONFIG_P2010) || defined(CONFIG_P2020)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6) |
+ (1 << 0xd) | (1 << 0xe) | (1 << 0xf),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 2) | (1 << 0xe),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 2) | (1 << 4),
+ },
+};
+#elif defined(CONFIG_FSL_CORENET)
+#else
+#error Need to define pci_config_info for processor
+#endif
+
+#ifndef CONFIG_FSL_CORENET
+int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel)
+{
+ return ((1 << io_sel) & pci_config_info[trgt].cfg);
+}
+#endif
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c
+ * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
+ * SDRAM controller. Those are all current 405 PPC's.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
+
+/*
+ * Set default values
+ */
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+#define ONE_BILLION 1000000000
+
+#define SDRAM0_CFG_DCE 0x80000000
+#define SDRAM0_CFG_SRE 0x40000000
+#define SDRAM0_CFG_PME 0x20000000
+#define SDRAM0_CFG_MEMCHK 0x10000000
+#define SDRAM0_CFG_REGEN 0x08000000
+#define SDRAM0_CFG_ECCDD 0x00400000
+#define SDRAM0_CFG_EMDULR 0x00200000
+#define SDRAM0_CFG_DRW_SHIFT (31-6)
+#define SDRAM0_CFG_BRPF_SHIFT (31-8)
+
+#define SDRAM0_TR_CASL_SHIFT (31-8)
+#define SDRAM0_TR_PTA_SHIFT (31-13)
+#define SDRAM0_TR_CTP_SHIFT (31-15)
+#define SDRAM0_TR_LDF_SHIFT (31-17)
+#define SDRAM0_TR_RFTA_SHIFT (31-29)
+#define SDRAM0_TR_RCD_SHIFT (31-31)
+
+#define SDRAM0_RTR_SHIFT (31-15)
+#define SDRAM0_ECCCFG_SHIFT (31-11)
+
+/* SDRAM0_CFG enable macro */
+#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
+
+#define SDRAM0_BXCR_SZ_MASK 0x000e0000
+#define SDRAM0_BXCR_AM_MASK 0x0000e000
+
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
+
+#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+
+#ifdef CONFIG_SPDDRAM_SILENT
+# define SPD_ERR(x) do { return 0; } while (0)
+#else
+# define SPD_ERR(x) do { printf(x); return(0); } while (0)
+#endif
+
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/* function prototypes */
+int spd_read(uint addr);
+
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * Input: null for default I2C spd functions or a pointer to a custom function
+ * returning spd_data.
+ */
+
+long int spd_sdram(int(read_spd)(uint addr))
+{
+ int tmp,row,col;
+ int total_size,bank_size,bank_code;
+ int ecc_on;
+ int mode;
+ int bank_cnt;
+
+ int sdram0_pmit=0x07c00000;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ int sdram0_besr0 = -1;
+ int sdram0_besr1 = -1;
+ int sdram0_eccesr = -1;
+#endif
+ int sdram0_ecccfg;
+
+ int sdram0_rtr=0;
+ int sdram0_tr=0;
+
+ int sdram0_b0cr;
+ int sdram0_b1cr;
+ int sdram0_b2cr;
+ int sdram0_b3cr;
+
+ int sdram0_cfg=0;
+
+ int t_rp;
+ int t_rcd;
+ int t_ras;
+ int t_rc;
+ int min_cas;
+
+ PPC4xx_SYS_INFO sys_info;
+ unsigned long bus_period_x_10;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ if (read_spd == 0){
+ read_spd=spd_read;
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ }
+
+ /* Make shure we are using SDRAM */
+ if (read_spd(2) != 0x04) {
+ SPD_ERR("SDRAM - non SDRAM memory module found\n");
+ }
+
+ /* ------------------------------------------------------------------
+ * configure memory timing register
+ *
+ * data from DIMM:
+ * 27 IN Row Precharge Time ( t RP)
+ * 29 MIN RAS to CAS Delay ( t RCD)
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * -------------------------------------------------------------------*/
+
+ /*
+ * first figure out which cas latency mode to use
+ * use the min supported mode
+ */
+
+ tmp = read_spd(127) & 0x6;
+ if (tmp == 0x02) { /* only cas = 2 supported */
+ min_cas = 2;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
+ min_cas = 3;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+ min_cas = 2;
+/* t_ck = read_spd(23); */
+/* t_ac = read_spd(24); */
+ } else {
+ SPD_ERR("SDRAM - unsupported CAS latency \n");
+ }
+
+ /* get some timing values, t_rp,t_rcd,t_ras,t_rc
+ */
+ t_rp = read_spd(27);
+ t_rcd = read_spd(29);
+ t_ras = read_spd(30);
+ t_rc = t_ras + t_rp;
+
+ /* The following timing calcs subtract 1 before deviding.
+ * this has effect of using ceiling instead of floor rounding,
+ * and also subtracting 1 to convert number to reg value
+ */
+ /* set up CASL */
+ sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+ /* set up PTA */
+ sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+ /* set up CTP */
+ tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+ if (tmp < 1)
+ tmp = 1;
+ sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+ /* set LDF = 2 cycles, reg value = 1 */
+ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+ /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+ tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+ if (tmp < 0)
+ tmp = 0;
+ if (tmp > 6)
+ tmp = 6;
+ sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
+ /* set RCD = t_rcd/bus_period*/
+ sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+
+
+ /*------------------------------------------------------------------
+ * configure RTR register
+ * -------------------------------------------------------------------*/
+ row = read_spd(3);
+ col = read_spd(4);
+ tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+ switch (tmp) {
+ case 0x00:
+ tmp = 15625;
+ break;
+ case 0x01:
+ tmp = 15625 / 4;
+ break;
+ case 0x02:
+ tmp = 15625 / 2;
+ break;
+ case 0x03:
+ tmp = 15625 * 2;
+ break;
+ case 0x04:
+ tmp = 15625 * 4;
+ break;
+ case 0x05:
+ tmp = 15625 * 8;
+ break;
+ default:
+ SPD_ERR("SDRAM - Bad refresh period \n");
+ }
+ /* convert from nsec to bus cycles */
+ tmp = (tmp * 10) / bus_period_x_10;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
+
+ /*------------------------------------------------------------------
+ * determine the number of banks used
+ * -------------------------------------------------------------------*/
+ /* byte 7:6 is module data width */
+ if (read_spd(7) != 0)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ tmp = read_spd(6);
+ if (tmp < 32)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ else if (tmp < 64)
+ bank_cnt = 1; /* one bank per sdram side */
+ else if (tmp < 73)
+ bank_cnt = 2; /* need two banks per side */
+ else if (tmp < 161)
+ bank_cnt = 4; /* need four banks per side */
+ else
+ SPD_ERR("SDRAM - unsupported module width\n");
+
+ /* byte 5 is the module row count (refered to as dimm "sides") */
+ tmp = read_spd(5);
+ if (tmp == 1)
+ ;
+ else if (tmp==2)
+ bank_cnt *= 2;
+ else if (tmp==4)
+ bank_cnt *= 4;
+ else
+ bank_cnt = 8; /* 8 is an error code */
+
+ if (bank_cnt > 4) /* we only have 4 banks to work with */
+ SPD_ERR("SDRAM - unsupported module rows for this width\n");
+
+ /* now check for ECC ability of module. We only support ECC
+ * on 32 bit wide devices with 8 bit ECC.
+ */
+ if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+ sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+ ecc_on = 1;
+ } else {
+ sdram0_ecccfg = 0;
+ ecc_on = 0;
+ }
+
+ /*------------------------------------------------------------------
+ * calculate total size
+ * -------------------------------------------------------------------*/
+ /* calculate total size and do sanity check */
+ tmp = read_spd(31);
+ total_size = 1 << 22; /* total_size = 4MB */
+ /* now multiply 4M by the smallest device row density */
+ /* note that we don't support asymetric rows */
+ while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+ total_size = total_size << 1;
+ tmp = tmp >> 1;
+ }
+ total_size *= read_spd(5); /* mult by module rows (dimm sides) */
+
+ /*------------------------------------------------------------------
+ * map rows * cols * banks to a mode
+ * -------------------------------------------------------------------*/
+
+ switch (row) {
+ case 11:
+ switch (col) {
+ case 8:
+ mode=4; /* mode 5 */
+ break;
+ case 9:
+ case 10:
+ mode=0; /* mode 1 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 12:
+ switch (col) {
+ case 8:
+ mode=3; /* mode 4 */
+ break;
+ case 9:
+ case 10:
+ mode=1; /* mode 2 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 13:
+ switch (col) {
+ case 8:
+ mode=5; /* mode 6 */
+ break;
+ case 9:
+ case 10:
+ if (read_spd(17) == 2)
+ mode = 6; /* mode 7 */
+ else
+ mode = 2; /* mode 3 */
+ break;
+ case 11:
+ mode = 2; /* mode 3 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+
+ /*------------------------------------------------------------------
+ * using the calculated values, compute the bank
+ * config register values.
+ * -------------------------------------------------------------------*/
+ sdram0_b1cr = 0;
+ sdram0_b2cr = 0;
+ sdram0_b3cr = 0;
+
+ /* compute the size of each bank */
+ bank_size = total_size / bank_cnt;
+ /* convert bank size to bank size code for ppc4xx
+ by takeing log2(bank_size) - 22 */
+ tmp = bank_size; /* start with tmp = bank_size */
+ bank_code = 0; /* and bank_code = 0 */
+ while (tmp > 1) { /* this takes log2 of tmp */
+ bank_code++; /* and stores result in bank_code */
+ tmp = tmp >> 1;
+ } /* bank_code is now log2(bank_size) */
+ bank_code -= 22; /* subtract 22 to get the code */
+
+ tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+ sdram0_b0cr = (bank_size * 0) | tmp;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
+#else
+ /* PPC405EP chip only supports two SDRAM banks */
+ if (bank_cnt > 1)
+ sdram0_b1cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ total_size = 2 * bank_size;
+#endif
+
+ /*
+ * enable sdram controller DCE=1
+ * enable burst read prefetch to 32 bytes BRPF=2
+ * leave other functions off
+ */
+
+ /*------------------------------------------------------------------
+ * now that we've done our calculations, we are ready to
+ * program all the registers.
+ * -------------------------------------------------------------------*/
+
+ /* disable memcontroller so updates work */
+ mtsdram(SDRAM0_CFG, 0);
+
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram(SDRAM0_BESR0, sdram0_besr0);
+ mtsdram(SDRAM0_BESR1, sdram0_besr1);
+ mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
+ mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
+#endif
+ mtsdram(SDRAM0_RTR, sdram0_rtr);
+ mtsdram(SDRAM0_PMIT, sdram0_pmit);
+ mtsdram(SDRAM0_B0CR, sdram0_b0cr);
+ mtsdram(SDRAM0_B1CR, sdram0_b1cr);
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram(SDRAM0_B2CR, sdram0_b2cr);
+ mtsdram(SDRAM0_B3CR, sdram0_b3cr);
+#endif
+ mtsdram(SDRAM0_TR, sdram0_tr);
+
+ /* SDRAM have a power on delay, 500 micro should do */
+ udelay(500);
+ sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
+ if (ecc_on)
+ sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+ mtsdram(SDRAM0_CFG, sdram0_cfg);
+
+ return (total_size);
+}
+
+int spd_read(uint addr)
+{
+ uchar data[2];
+
+ if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
+ return (int)data[0];
+ else
+ return 0;
+}
+
+#endif /* CONFIG_SPD_EEPROM */
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c
+ * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
+ * DDR controller. Those are 440GP/GX/EP/GR.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+#include <asm/mmu.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR))
+
+/*
+ * Set default values
+ */
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+#define ONE_BILLION 1000000000
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+/*-----------------------------------------------------------------------------+
+ | General Definition
+ +-----------------------------------------------------------------------------*/
+#define DEFAULT_SPD_ADDR1 0x53
+#define DEFAULT_SPD_ADDR2 0x52
+#define MAXBANKS 4 /* at most 4 dimm banks */
+#define MAX_SPD_BYTES 256
+#define NUMHALFCYCLES 4
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define MAXBXCR 4
+#define TRUE 1
+#define FALSE 0
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+/* bank_parms is used to sort the bank sizes by descending order */
+struct bank_param {
+ unsigned long cr;
+ unsigned long bank_size_bytes;
+};
+
+typedef struct bank_param BANKPARMS;
+
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+extern const unsigned char cfg_simulate_spd_eeprom[128];
+#endif
+
+static unsigned char spd_read(uchar chip, uint addr);
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr1(void);
+
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * BUG: Don't handle ECC memory
+ * BUG: A few values in the TR register is currently hardcoded
+ */
+long int spd_sdram(void) {
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+ unsigned long total_size;
+ unsigned long cfg0;
+ unsigned long mcsts;
+ unsigned long num_dimm_banks; /* on board dimm banks */
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*
+ * Read the SPD information using I2C interface. Check to see if the
+ * DIMM slots are populated.
+ */
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the memory type for the dimms plugged.
+ */
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the voltage type for the dimms plugged.
+ */
+ check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+ mtsdr(SDR0_SRST, 0x00000000);
+#endif
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG0)
+ */
+ program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG1)
+ */
+ program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM refresh register (SDRAM0_RTR)
+ */
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM Timing Register 0 (SDRAM0_TR0)
+ */
+ program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program the BxCR registers to find out total sdram installed
+ */
+ total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+ num_dimm_banks);
+
+#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
+ /* and program tlb entries for this size (dynamic) */
+ program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
+#endif
+
+ /*
+ * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+ */
+ mtsdram(SDRAM0_CLKTR, 0x40000000);
+
+ /*
+ * delay to ensure 200 usec has elapsed
+ */
+ udelay(400);
+
+ /*
+ * enable the memory controller
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+ mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
+
+ /*
+ * wait for SDRAM_CFG0_DC_EN to complete
+ */
+ while (1) {
+ mfsdram(SDRAM0_MCSTS, mcsts);
+ if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
+ break;
+ }
+
+ /*
+ * program SDRAM Timing Register 1, adding some delays
+ */
+ program_tr1();
+
+#ifdef CONFIG_DDR_ECC
+ /*
+ * If ecc is enabled, initialize the parity bits.
+ */
+ ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
+#endif
+
+ return total_size;
+}
+
+static unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+ if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
+ /*
+ * Onboard spd eeprom requested -> simulate values
+ */
+ return cfg_simulate_spd_eeprom[addr];
+ }
+#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
+
+ if (i2c_probe(chip) == 0) {
+ if (i2c_read(chip, addr, 1, data, 1) == 0) {
+ return data[0];
+ }
+ }
+
+ return 0;
+}
+
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated\n", dimm_num);
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+}
+
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned char dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 7:
+ debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+ break;
+ default:
+ printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+ dimm_num);
+ printf("Only DDR SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+}
+
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (voltage_type != 0x04) {
+ printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+ dimm_num);
+ spd_ddr_init_hang ();
+ } else {
+ debug("DIMM %lu voltage level supported.\n", dimm_num);
+ }
+ break;
+ }
+ }
+}
+
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long cfg0;
+ unsigned long ecc_enabled;
+ unsigned char ecc;
+ unsigned char attributes;
+ unsigned long data_width;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+
+ /*
+ * clear bits
+ */
+ cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+ SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+ SDRAM_CFG0_DMWD_MASK |
+ SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+
+
+ /*
+ * FIXME: assume the DDR SDRAMs in both banks are the same
+ */
+ ecc_enabled = TRUE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) {
+ ecc_enabled = FALSE;
+ }
+
+ /*
+ * program Registered DIMM Enable
+ */
+ attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+ if ((attributes & 0x02) != 0x00) {
+ cfg0 |= SDRAM_CFG0_RDEN;
+ }
+
+ /*
+ * program DDR SDRAM Data Width
+ */
+ data_width =
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+ if (data_width == 64 || data_width == 72) {
+ dimm_64bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_64;
+ } else if (data_width == 32 || data_width == 40) {
+ dimm_32bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_32;
+ } else {
+ printf("WARNING: DIMM with datawidth of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+ spd_ddr_init_hang ();
+ }
+ break;
+ }
+ }
+
+ /*
+ * program Memory Data Error Checking
+ */
+ if (ecc_enabled == TRUE) {
+ cfg0 |= SDRAM_CFG0_MCHK_GEN;
+ } else {
+ cfg0 |= SDRAM_CFG0_MCHK_NON;
+ }
+
+ /*
+ * program Page Management Unit (0 == enabled)
+ */
+ cfg0 &= ~SDRAM_CFG0_PMUD;
+
+ /*
+ * program Memory Controller Options 0
+ * Note: DCEN must be enabled after all DDR SDRAM controller
+ * configuration registers get initialized.
+ */
+ mtsdram(SDRAM0_CFG0, cfg0);
+}
+
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long cfg1;
+ mfsdram(SDRAM0_CFG1, cfg1);
+
+ /*
+ * Self-refresh exit, disable PM
+ */
+ cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+
+ /*
+ * program Memory Controller Options 1
+ */
+ mtsdram(SDRAM0_CFG1, cfg1);
+}
+
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bus_period_x_10;
+ unsigned long refresh_rate = 0;
+ unsigned char refresh_rate_type;
+ unsigned long refresh_interval;
+ unsigned long sdram_rtr;
+ PPC4xx_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+ switch (refresh_rate_type) {
+ case 0x00:
+ refresh_rate = 15625;
+ break;
+ case 0x01:
+ refresh_rate = 15625/4;
+ break;
+ case 0x02:
+ refresh_rate = 15625/2;
+ break;
+ case 0x03:
+ refresh_rate = 15626*2;
+ break;
+ case 0x04:
+ refresh_rate = 15625*4;
+ break;
+ case 0x05:
+ refresh_rate = 15625*8;
+ break;
+ default:
+ printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+ dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n");
+ break;
+ }
+
+ break;
+ }
+ }
+
+ refresh_interval = refresh_rate * 10 / bus_period_x_10;
+ sdram_rtr = (refresh_interval & 0x3ff8) << 16;
+
+ /*
+ * program Refresh Timer Register (SDRAM0_RTR)
+ */
+ mtsdram(SDRAM0_RTR, sdram_rtr);
+}
+
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tr0;
+ unsigned char wcsbc;
+ unsigned char t_rp_ns;
+ unsigned char t_rcd_ns;
+ unsigned char t_ras_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_rcd_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rfc_clk;
+ unsigned long plb_check;
+ unsigned char cas_bit;
+ unsigned long cas_index;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned long cycle_time_ns_x_10[3];
+ unsigned long tcyc_3_0_ns_x_10;
+ unsigned long tcyc_2_5_ns_x_10;
+ unsigned long tcyc_2_0_ns_x_10;
+ unsigned long tcyc_reg;
+ unsigned long bus_period_x_10;
+ PPC4xx_SYS_INFO sys_info;
+ unsigned long residue;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(SDRAM0_TR0, tr0);
+ tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+ SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+ SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+ SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+
+ /*
+ * initialization
+ */
+ wcsbc = 0;
+ t_rp_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ tcyc_2_0_ns_x_10 = 0;
+ tcyc_2_5_ns_x_10 = 0;
+ tcyc_3_0_ns_x_10 = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+ t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+ t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+ t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+ dimm_num);
+ spd_ddr_init_hang ();
+ }
+
+ cycle_time_ns_x_10[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+ }
+
+ cas_index = 0;
+
+ if ((cas_bit & 0x80) != 0) {
+ cas_index += 3;
+ } else if ((cas_bit & 0x40) != 0) {
+ cas_index += 2;
+ } else if ((cas_bit & 0x20) != 0) {
+ cas_index += 1;
+ }
+
+ if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+ tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+ tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+ tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_0_available = FALSE;
+ }
+
+ break;
+ }
+ }
+
+ /*
+ * Program SD_WR and SD_WCSBC fields
+ */
+ tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
+ switch (wcsbc) {
+ case 0:
+ tr0 |= SDRAM_TR0_SDWD_0_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDWD_1_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CASL field
+ */
+ if ((cas_2_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+ } else if ((cas_2_5_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+ } else if ((cas_3_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+ } else {
+ printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+ printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * Calculate Trp in clock cycles and round up if necessary
+ * Program SD_PTA field
+ */
+ t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rp_clk++;
+ }
+ switch ((unsigned long)t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDPA_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDPA_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDPA_4_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CTP field
+ */
+ t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+ plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+ if (sys_info.freqPLB != plb_check) {
+ t_ras_rcd_clk++;
+ }
+ switch (t_ras_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDCP_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDCP_3_CLK;
+ break;
+ case 4:
+ tr0 |= SDRAM_TR0_SDCP_4_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDCP_5_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_LDF field
+ */
+ tr0 |= SDRAM_TR0_SDLD_2_CLK;
+
+ /*
+ * Program SD_RFTA field
+ * FIXME tRFC hardcoded as 75 nanoseconds
+ */
+ t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+ residue = sys_info.freqPLB % (ONE_BILLION / 75);
+ if (residue >= (ONE_BILLION / 150)) {
+ t_rfc_clk++;
+ }
+ switch (t_rfc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ tr0 |= SDRAM_TR0_SDRA_6_CLK;
+ break;
+ case 7:
+ tr0 |= SDRAM_TR0_SDRA_7_CLK;
+ break;
+ case 8:
+ tr0 |= SDRAM_TR0_SDRA_8_CLK;
+ break;
+ case 9:
+ tr0 |= SDRAM_TR0_SDRA_9_CLK;
+ break;
+ case 10:
+ tr0 |= SDRAM_TR0_SDRA_10_CLK;
+ break;
+ case 11:
+ tr0 |= SDRAM_TR0_SDRA_11_CLK;
+ break;
+ case 12:
+ tr0 |= SDRAM_TR0_SDRA_12_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRA_13_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_RCD field
+ */
+ t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rcd_clk++;
+ }
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDRD_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDRD_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRD_4_CLK;
+ break;
+ }
+
+ debug("tr0: %x\n", tr0);
+ mtsdram(SDRAM0_TR0, tr0);
+}
+
+static int short_mem_test(void)
+{
+ unsigned long i, j;
+ unsigned long bxcr_num;
+ unsigned long *membase;
+ const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
+ if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+ /* Bank is enabled */
+ membase = (unsigned long*)
+ (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
+
+ /*
+ * Run the short memory test
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ /* printf("bank enabled base:%x\n", &membase[j]); */
+ membase[j] = test[i][j];
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((unsigned long)&(membase[j]));
+ return 0;
+ }
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ if (j < NUMMEMWORDS)
+ return 0;
+ }
+
+ /*
+ * see if the rdclt value passed
+ */
+ if (i < NUMMEMTESTS)
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void program_tr1(void)
+{
+ unsigned long tr0;
+ unsigned long tr1;
+ unsigned long cfg0;
+ unsigned long ecc_temp;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long k;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ unsigned long rdclt;
+ unsigned long rdclt_offset;
+ long max_start;
+ long max_end;
+ long rdclt_average;
+ unsigned char window_found;
+ unsigned char fail_found;
+ unsigned char pass_found;
+ PPC4xx_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(SDRAM0_TR1, tr1);
+ tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+ SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+
+ mfsdram(SDRAM0_TR0, tr0);
+ if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+ (sys_info.freqPLB > 100000000)) {
+ tr1 |= SDRAM_TR1_RDSS_TR2;
+ tr1 |= SDRAM_TR1_RDSL_STAGE3;
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDSS_TR1;
+ tr1 |= SDRAM_TR1_RDSL_STAGE2;
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * save CFG0 ECC setting to a temporary variable and turn ECC off
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+ ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(SDRAM0_DLYCAL, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ rdclt_offset = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+ debug("Starting memory test ");
+
+ for (k = 0; k < NUMHALFCYCLES; k++) {
+ for (rdclt = 0; rdclt < dly_val; rdclt++) {
+ /*
+ * Set the timing reg for the test.
+ */
+ mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0) {
+ current_start = rdclt_offset + rdclt;
+ }
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rdclt_offset + rdclt;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val>>2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ debug(".");
+
+ if (window_found == TRUE) {
+ break;
+ }
+
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ rdclt_offset += dly_val;
+ }
+ debug("\n");
+
+ /*
+ * make sure we find the window
+ */
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * restore the orignal ECC setting
+ */
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+
+ /*
+ * set the SDRAM TR1 RDCD value
+ */
+ tr1 &= ~SDRAM_TR1_RDCD_MASK;
+ if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * set the SDRAM TR1 RDCLT value
+ */
+ tr1 &= ~SDRAM_TR1_RDCT_MASK;
+ while (max_end >= (dly_val << 1)) {
+ max_end -= (dly_val << 1);
+ max_start -= (dly_val << 1);
+ }
+
+ rdclt_average = ((max_start + max_end) >> 1);
+
+ if (rdclt_average < 0) {
+ rdclt_average = 0;
+ }
+
+ if (rdclt_average >= dly_val) {
+ rdclt_average -= dly_val;
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ }
+ tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+
+ debug("tr1: %x\n", tr1);
+
+ /*
+ * program SDRAM Timing Register 1 TR1
+ */
+ mtsdram(SDRAM0_TR1, tr1);
+}
+
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bank_base_addr;
+ unsigned long cr;
+ unsigned long i;
+ unsigned long j;
+ unsigned long temp;
+ unsigned char num_row_addr;
+ unsigned char num_col_addr;
+ unsigned char num_banks;
+ unsigned char bank_size_id;
+ unsigned long ctrl_bank_num[MAXBANKS];
+ unsigned long bx_cr_num;
+ unsigned long largest_size_index;
+ unsigned long largest_size;
+ unsigned long current_size_index;
+ BANKPARMS bank_parms[MAXBXCR];
+ unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
+ unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
+
+ /*
+ * Set the BxCR regs. First, wipe out the bank config registers.
+ */
+ for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
+ mtdcr(SDRAM0_CFGDATA, 0x00000000);
+ bank_parms[bx_cr_num].bank_size_bytes = 0;
+ }
+
+#ifdef CONFIG_BAMBOO
+ /*
+ * This next section is hardware dependent and must be programmed
+ * to match the hardware. For bamboo, the following holds...
+ * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
+ * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
+ * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
+ * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
+ * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
+ */
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 1;
+ ctrl_bank_num[2] = 3;
+#else
+ /*
+ * Ocotea, Ebony and the other IBM/AMCC eval boards have
+ * 2 DIMM slots with each max 2 banks
+ */
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 2;
+#endif
+
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CONFIG_SYS_SDRAM_BASE;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+ debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
+ num_row_addr, num_col_addr, num_banks);
+
+ /*
+ * Set the SDRAM0_BxCR regs
+ */
+ cr = 0;
+ switch (bank_size_id) {
+ case 0x02:
+ cr |= SDRAM_BXCR_SDSZ_8;
+ break;
+ case 0x04:
+ cr |= SDRAM_BXCR_SDSZ_16;
+ break;
+ case 0x08:
+ cr |= SDRAM_BXCR_SDSZ_32;
+ break;
+ case 0x10:
+ cr |= SDRAM_BXCR_SDSZ_64;
+ break;
+ case 0x20:
+ cr |= SDRAM_BXCR_SDSZ_128;
+ break;
+ case 0x40:
+ cr |= SDRAM_BXCR_SDSZ_256;
+ break;
+ case 0x80:
+ cr |= SDRAM_BXCR_SDSZ_512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ bank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ switch (num_col_addr) {
+ case 0x08:
+ cr |= SDRAM_BXCR_SDAM_1;
+ break;
+ case 0x09:
+ cr |= SDRAM_BXCR_SDAM_2;
+ break;
+ case 0x0A:
+ cr |= SDRAM_BXCR_SDAM_3;
+ break;
+ case 0x0B:
+ cr |= SDRAM_BXCR_SDAM_4;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * enable the bank
+ */
+ cr |= SDRAM_BXCR_SDBE;
+
+ for (i = 0; i < num_banks; i++) {
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
+ (4 << 20) * bank_size_id;
+ bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
+ debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
+ dimm_num, i, ctrl_bank_num[dimm_num]+i,
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
+ }
+ }
+ }
+
+ /* Initialize sort tables */
+ for (i = 0; i < MAXBXCR; i++) {
+ sorted_bank_num[i] = i;
+ sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
+ }
+
+ for (i = 0; i < MAXBXCR-1; i++) {
+ largest_size = sorted_bank_size[i];
+ largest_size_index = 255;
+
+ /* Find the largest remaining value */
+ for (j = i + 1; j < MAXBXCR; j++) {
+ if (sorted_bank_size[j] > largest_size) {
+ /* Save largest remaining value and its index */
+ largest_size = sorted_bank_size[j];
+ largest_size_index = j;
+ }
+ }
+
+ if (largest_size_index != 255) {
+ /* Swap the current and largest values */
+ current_size_index = sorted_bank_num[largest_size_index];
+ sorted_bank_size[largest_size_index] = sorted_bank_size[i];
+ sorted_bank_size[i] = largest_size;
+ sorted_bank_num[largest_size_index] = sorted_bank_num[i];
+ sorted_bank_num[i] = current_size_index;
+ }
+ }
+
+ /* Set the SDRAM0_BxCR regs thanks to sort tables */
+ for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
+ temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
+ SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
+ temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
+ bank_parms[sorted_bank_num[bx_cr_num]].cr;
+ mtdcr(SDRAM0_CFGDATA, temp);
+ bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
+ debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
+ }
+ }
+
+ return(bank_base_addr);
+}
+#endif /* CONFIG_SPD_EEPROM */
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405: 405EX(r)
+ * 440/460: 440SP/440SPe/460EX/460GT
+ *
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+
+ * (C) Copyright 2007-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+
+#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ mfsdram(SDRAM_##mnemonic, data); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
+#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ data = mfdcr(SDRAM_##mnemonic); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
+#if defined(CONFIG_440)
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
+ * memory region. Right now the cache should still be disabled in U-Boot
+ * because of the EMAC driver, that need its buffer descriptor to be located
+ * in non cached memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+/* enable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE 0
+#else
+/* disable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+#endif /* CONFIG_4xx_DCACHE */
+
+void dcbz_area(u32 start_address, u32 num_bytes);
+#endif /* CONFIG_440 */
+
+#define MAXRANKS 4
+#define MAXBXCF 4
+
+#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#if !defined(CONFIG_NAND_SPL)
+/*-----------------------------------------------------------------------------+
+ * sdram_memsize
+ *-----------------------------------------------------------------------------*/
+phys_size_t sdram_memsize(void)
+{
+ phys_size_t mem_size;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ unsigned long mb0cf;
+ unsigned long sdsz;
+ unsigned long i;
+
+ mem_size = 0;
+
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+ mfsdram(SDRAM_MCSTAT, mcstat);
+
+ /* DDR controller must be enabled and not in self-refresh. */
+ /* Otherwise memsize is zero. */
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+ for (i = 0; i < MAXBXCF; i++) {
+ mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
+ /* Banks enabled */
+ if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+#if defined(CONFIG_440)
+ sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
+#else
+ sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK;
+#endif
+ switch(sdsz) {
+ case SDRAM_RXBAS_SDSZ_8:
+ mem_size+=8;
+ break;
+ case SDRAM_RXBAS_SDSZ_16:
+ mem_size+=16;
+ break;
+ case SDRAM_RXBAS_SDSZ_32:
+ mem_size+=32;
+ break;
+ case SDRAM_RXBAS_SDSZ_64:
+ mem_size+=64;
+ break;
+ case SDRAM_RXBAS_SDSZ_128:
+ mem_size+=128;
+ break;
+ case SDRAM_RXBAS_SDSZ_256:
+ mem_size+=256;
+ break;
+ case SDRAM_RXBAS_SDSZ_512:
+ mem_size+=512;
+ break;
+ case SDRAM_RXBAS_SDSZ_1024:
+ mem_size+=1024;
+ break;
+ case SDRAM_RXBAS_SDSZ_2048:
+ mem_size+=2048;
+ break;
+ case SDRAM_RXBAS_SDSZ_4096:
+ mem_size+=4096;
+ break;
+ default:
+ printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
+ , sdsz);
+ mem_size=0;
+ break;
+ }
+ }
+ }
+ }
+
+ return mem_size << 20;
+}
+
+/*-----------------------------------------------------------------------------+
+ * is_ecc_enabled
+ *-----------------------------------------------------------------------------*/
+static unsigned long is_ecc_enabled(void)
+{
+ unsigned long val;
+
+ mfsdram(SDRAM_MCOPT1, val);
+
+ return SDRAM_MCOPT1_MCHK_CHK_DECODE(val);
+}
+
+/*-----------------------------------------------------------------------------+
+ * board_add_ram_info
+ *-----------------------------------------------------------------------------*/
+void board_add_ram_info(int use_default)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ u32 val;
+
+ if (is_ecc_enabled())
+ puts(" (ECC");
+ else
+ puts(" (ECC not");
+
+ get_sys_info(&board_cfg);
+
+#if defined(CONFIG_405EX)
+ val = board_cfg.freqPLB;
+#else
+ mfsdr(SDR0_DDR0, val);
+ val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1);
+#endif
+ printf(" enabled, %d MHz", (val * 2) / 1000000);
+
+ mfsdram(SDRAM_MMODE, val);
+ val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
+ printf(", CL%d)", val);
+}
+#endif /* !CONFIG_NAND_SPL */
+
+#if defined(CONFIG_SPD_EEPROM)
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define SDRAM_DDR1 1
+#define SDRAM_DDR2 2
+#define SDRAM_NONE 0
+
+#define MAXDIMMS 2
+#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
+
+#define ONE_BILLION 1000000000
+
+#define CMD_NOP (7 << 19)
+#define CMD_PRECHARGE (2 << 19)
+#define CMD_REFRESH (1 << 19)
+#define CMD_EMR (0 << 19)
+#define CMD_READ (5 << 19)
+#define CMD_WRITE (4 << 19)
+
+#define SELECT_MR (0 << 16)
+#define SELECT_EMR (1 << 16)
+#define SELECT_EMR2 (2 << 16)
+#define SELECT_EMR3 (3 << 16)
+
+/* MR */
+#define DLL_RESET 0x00000100
+
+#define WRITE_RECOV_2 (1 << 9)
+#define WRITE_RECOV_3 (2 << 9)
+#define WRITE_RECOV_4 (3 << 9)
+#define WRITE_RECOV_5 (4 << 9)
+#define WRITE_RECOV_6 (5 << 9)
+
+#define BURST_LEN_4 0x00000002
+
+/* EMR */
+#define ODT_0_OHM 0x00000000
+#define ODT_50_OHM 0x00000044
+#define ODT_75_OHM 0x00000004
+#define ODT_150_OHM 0x00000040
+
+#define ODS_FULL 0x00000000
+#define ODS_REDUCED 0x00000002
+#define OCD_CALIB_DEF 0x00000380
+
+/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
+#define ODT_EB0R (0x80000000 >> 8)
+#define ODT_EB0W (0x80000000 >> 7)
+#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
+#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
+#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
+
+/* Defines for the Read Cycle Delay test */
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define NUMLOOPS 64 /* memory test loops */
+
+/*
+ * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ * To support such configurations, we "only" map the first 2GB via the TLB's. We
+ * need some free virtual address space for the remaining peripherals like, SoC
+ * devices, FLASH etc.
+ *
+ * Note that ECC is currently not supported on configurations with more than 2GB
+ * SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ * the ECC parity byte of the remaining area can't be written.
+ */
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+
+/* Private Structure Definitions */
+
+/* enum only to ease code for cas latency setting */
+typedef enum ddr_cas_id {
+ DDR_CAS_2 = 20,
+ DDR_CAS_2_5 = 25,
+ DDR_CAS_3 = 30,
+ DDR_CAS_4 = 40,
+ DDR_CAS_5 = 50
+} ddr_cas_id_t;
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery);
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas,
+ int write_recovery);
+#ifdef CONFIG_DDR_ECC
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value);
+#endif
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+static void test(void);
+#else
+static void DQS_calibration_process(void);
+#endif
+#endif
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+ if (i2c_probe(chip) == 0)
+ if (i2c_read(chip, addr, 1, data, 1) == 0)
+ return data[0];
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space. It is important that the routine does not require .sbss, .bss or
+ * .data sections. It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures SDRAM memory banks for DDR operation.
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned char spd0[MAX_SPD_BYTES];
+ unsigned char spd1[MAX_SPD_BYTES];
+ unsigned char *dimm_spd[MAXDIMMS];
+ unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
+ unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned long val;
+ ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
+ int write_recovery;
+ phys_size_t dram_size = 0;
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*------------------------------------------------------------------
+ * Set up an array of SPD matrixes.
+ *-----------------------------------------------------------------*/
+ dimm_spd[0] = spd0;
+ dimm_spd[1] = spd1;
+
+ /*------------------------------------------------------------------
+ * Reset the DDR-SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdr(SDR0_SRST, (0x80000000 >> 10));
+ mtsdr(SDR0_SRST, 0x00000000);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*------------------------------------------------------------------
+ * Clear out the serial presence detect buffers.
+ * Perform IIC reads from the dimm. Fill in the spds.
+ * Check to see if the dimm slots are populated
+ *-----------------------------------------------------------------*/
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the memory type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the frequency supported for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the total rank number.
+ *-----------------------------------------------------------------*/
+ check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the voltage type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Except Enabling of the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val &
+ ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
+ SDRAM_MCOPT2_ISIE_MASK))
+ | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
+ SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
+ SDRAM_MCOPT2_ISIE_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 1 register
+ * Note: Does not enable the memory controller.
+ *-----------------------------------------------------------------*/
+ program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM refresh register.
+ *-----------------------------------------------------------------*/
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM mode register.
+ *-----------------------------------------------------------------*/
+ program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ &selected_cas, &write_recovery);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_WRDTR, val);
+ mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Clock Timing Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CLKTR, val);
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+ ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
+
+ /*------------------------------------------------------------------
+ * Program the BxCF registers.
+ *-----------------------------------------------------------------*/
+ program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM timing registers.
+ *-----------------------------------------------------------------*/
+ program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the Extended Mode register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MEMODE, val);
+ mtsdram(SDRAM_MEMODE,
+ (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
+ SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
+ (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
+ | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program Initialization preload registers.
+ *-----------------------------------------------------------------*/
+ program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ selected_cas, write_recovery);
+
+ /*------------------------------------------------------------------
+ * Delay to ensure 200usec have elapsed since reset.
+ *-----------------------------------------------------------------*/
+ udelay(400);
+
+ /*------------------------------------------------------------------
+ * Set the memory queue core base addr.
+ *-----------------------------------------------------------------*/
+ program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Enable the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
+ SDRAM_MCOPT2_IPTR_EXECUTE);
+
+ /*------------------------------------------------------------------
+ * Wait for IPTR_EXECUTE init sequence to complete.
+ *-----------------------------------------------------------------*/
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
+
+ /* enable the controller only after init sequence completes */
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
+
+ /* Make sure delay-line calibration is done before proceeding */
+ do {
+ mfsdram(SDRAM_DLCR, val);
+ } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
+
+ /* get installed memory size */
+ dram_size = sdram_memsize();
+
+ /*
+ * Limit size to 2GB
+ */
+ if (dram_size > CONFIG_MAX_MEM_MAPPED)
+ dram_size = CONFIG_MAX_MEM_MAPPED;
+
+ /* and program tlb entries for this size (dynamic) */
+
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, dram_size, 0);
+
+ /*------------------------------------------------------------------
+ * DQS calibration.
+ *-----------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ DQS_autocalibration();
+#else
+ program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+ /*------------------------------------------------------------------
+ * If ecc is enabled, initialize the parity bits.
+ *-----------------------------------------------------------------*/
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
+#endif
+
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, dram_size);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+ ppc4xx_ibm_ddr2_register_dump();
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ return sdram_memsize();
+}
+
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ debug("\nspd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], num_of_bytes);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ debug("spd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], total_size);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated\n", dimm_num);
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+}
+
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that they
+ * really are DDR specific DIMMs.
+ *-----------------------------------------------------------------*/
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 1:
+ printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
+ "slot %d.\n", (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 2:
+ printf("ERROR: EDO DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 3:
+ printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 4:
+ printf("ERROR: SDRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 5:
+ printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 6:
+ printf("ERROR: SGRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 7:
+ debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR1;
+ break;
+ case 8:
+ debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR2;
+ break;
+ default:
+ printf("ERROR: Unknown DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+ for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
+ if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
+ && (dimm_populated[dimm_num] != SDRAM_NONE)
+ && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
+ printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
+ spd_ddr_init_hang ();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tcyc_reg;
+ unsigned long cycle_time;
+ unsigned long calc_cycle_time;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ PPC4xx_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*
+ * calc_cycle_time is calculated from DDR frequency set by board/chip
+ * and is expressed in multiple of 10 picoseconds
+ * to match the way DIMM cycle time is calculated below.
+ */
+ calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ /*
+ * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
+ * the higher order nibble (bits 4-7) designates the cycle time
+ * to a granularity of 1ns;
+ * the value presented by the lower order nibble (bits 0-3)
+ * has a granularity of .1ns and is added to the value designated
+ * by the higher nibble. In addition, four lines of the lower order
+ * nibble are assigned to support +.25,+.33, +.66 and +.75.
+ */
+ /* Convert from hex to decimal */
+ if ((tcyc_reg & 0x0F) == 0x0D)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ else if ((tcyc_reg & 0x0F) == 0x0C)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
+ else if ((tcyc_reg & 0x0F) == 0x0B)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
+ else if ((tcyc_reg & 0x0F) == 0x0A)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
+ else
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+ debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
+
+ if (cycle_time > (calc_cycle_time + 10)) {
+ /*
+ * the provided sdram cycle_time is too small
+ * for the available DIMM cycle_time.
+ * The additionnal 100ps is here to accept a small incertainty.
+ */
+ printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+ "slot %d \n while calculated cycle time is %d ps.\n",
+ (unsigned int)(cycle_time*10),
+ (unsigned int)dimm_num,
+ (unsigned int)(calc_cycle_time*10));
+ printf("Replace the DIMM, or change DDR frequency via "
+ "strapping bits.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies two
+ * ranks/banks maximum are availables.
+ *-----------------------------------------------------------------*/
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_rank;
+ unsigned long total_rank = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ dimm_rank = (dimm_rank & 0x0F) +1;
+ else
+ dimm_rank = dimm_rank & 0x0F;
+
+
+ if (dimm_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with %lu ranks in "
+ "slot %lu is not supported.\n", dimm_rank, dimm_num);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ } else
+ total_rank += dimm_rank;
+ }
+ if (total_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with a total of %d ranks "
+ "for all slots.\n", (unsigned int)total_rank);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Remove one of the DIMM modules.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * only support 2.5V modules.
+ * This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ switch (voltage_type) {
+ case 0x00:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 5.0 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x01:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is LVTTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x02:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 1.5 Volt.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x03:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 3.3 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x04:
+ /* 2.5 Voltage only for DDR1 */
+ break;
+ case 0x05:
+ /* 1.8 Voltage only for DDR2 */
+ break;
+ default:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_copt1.
+ *-----------------------------------------------------------------------------*/
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long mcopt1;
+ unsigned long ecc_enabled;
+ unsigned long ecc = 0;
+ unsigned long data_width = 0;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+ unsigned long registered = 0;
+ unsigned long attribute = 0;
+ unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ unsigned long bankcount;
+ unsigned long ddrtype;
+ unsigned long val;
+
+#ifdef CONFIG_DDR_ECC
+ ecc_enabled = TRUE;
+#else
+ ecc_enabled = FALSE;
+#endif
+ dimm_32bit = FALSE;
+ dimm_64bit = FALSE;
+ buf0 = FALSE;
+ buf1 = FALSE;
+
+ /*------------------------------------------------------------------
+ * Set memory controller options reg 1, SDRAM_MCOPT1.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, val);
+ mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
+ SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
+ SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
+ SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
+ SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
+ SDRAM_MCOPT1_DREF_MASK);
+
+ mcopt1 |= SDRAM_MCOPT1_QDEP;
+ mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
+ mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ /* test ecc support */
+ ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) /* ecc not supported */
+ ecc_enabled = FALSE;
+
+ /* test bank count */
+ bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
+ if (bankcount == 0x04) /* bank count = 4 */
+ mcopt1 |= SDRAM_MCOPT1_4_BANKS;
+ else /* bank count = 8 */
+ mcopt1 |= SDRAM_MCOPT1_8_BANKS;
+
+ /* test DDR type */
+ ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
+ /* test for buffered/unbuffered, registered, differential clocks */
+ registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
+ attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
+
+ /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ if (dimm_num == 0) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) { /* DDR2 always buffered */
+ /* TODO: what about above comments ? */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ } else {
+ /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf0 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ }
+ }
+ }
+ else if (dimm_num == 1) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) {
+ /* DDR2 always buffered */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ } else {
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf1 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ }
+ }
+ }
+
+ /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
+ data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
+
+ switch (data_width) {
+ case 72:
+ case 64:
+ dimm_64bit = TRUE;
+ break;
+ case 40:
+ case 32:
+ dimm_32bit = TRUE;
+ break;
+ default:
+ printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
+ break;
+ }
+ }
+ }
+
+ /* verify matching properties */
+ if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
+ if (buf0 != buf1) {
+ printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
+ printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
+ spd_ddr_init_hang ();
+ }
+ else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_64;
+ } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_32;
+ } else {
+ printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ if (ecc_enabled == TRUE)
+ mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
+ else
+ mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
+
+ mtsdram(SDRAM_MCOPT1, mcopt1);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_codt.
+ *-----------------------------------------------------------------------------*/
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long codt;
+ unsigned long modt0 = 0;
+ unsigned long modt1 = 0;
+ unsigned long modt2 = 0;
+ unsigned long modt3 = 0;
+ unsigned char dimm_num;
+ unsigned char dimm_rank;
+ unsigned char total_rank = 0;
+ unsigned char total_dimm = 0;
+ unsigned char dimm_type = 0;
+ unsigned char firstSlot = 0;
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CODT, codt);
+ codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END);
+ codt |= SDRAM_CODT_IO_NMODE;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
+ dimm_rank = (dimm_rank & 0x0F) + 1;
+ dimm_type = SDRAM_DDR2;
+ } else {
+ dimm_rank = dimm_rank & 0x0F;
+ dimm_type = SDRAM_DDR1;
+ }
+
+ total_rank += dimm_rank;
+ total_dimm++;
+ if ((dimm_num == 0) && (total_dimm == 1))
+ firstSlot = TRUE;
+ else
+ firstSlot = FALSE;
+ }
+ }
+ if (dimm_type == SDRAM_DDR2) {
+ codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
+ if ((total_dimm == 1) && (firstSlot == TRUE)) {
+ if (total_rank == 1) { /* PUUU */
+ codt |= CALC_ODT_R(0);
+ modt0 = CALC_ODT_W(0);
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) { /* PPUU */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
+ modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
+ if (total_rank == 1) { /* UUPU */
+ codt |= CALC_ODT_R(2);
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_W(2);
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) { /* UUPP */
+ codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
+ modt3 = 0x00000000;
+ }
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2) { /* PUPU */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
+ modt0 = CALC_ODT_RW(2);
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_RW(0);
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 4) { /* PPPP */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
+ CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
+ modt3 = 0x00000000;
+ }
+ }
+ } else {
+ codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+
+ if (total_dimm == 1) {
+ if (total_rank == 1)
+ codt |= 0x00800000;
+ if (total_rank == 2)
+ codt |= 0x02800000;
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2)
+ codt |= 0x08800000;
+ if (total_rank == 4)
+ codt |= 0x2a800000;
+ }
+ }
+
+ debug("nb of dimm %d\n", total_dimm);
+ debug("nb of rank %d\n", total_rank);
+ if (total_dimm == 1)
+ debug("dimm in slot %d\n", firstSlot);
+
+ mtsdram(SDRAM_CODT, codt);
+ mtsdram(SDRAM_MODT0, modt0);
+ mtsdram(SDRAM_MODT1, modt1);
+ mtsdram(SDRAM_MODT2, modt2);
+ mtsdram(SDRAM_MODT3, modt3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_initplr.
+ *-----------------------------------------------------------------------------*/
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas,
+ int write_recovery)
+{
+ u32 cas = 0;
+ u32 odt = 0;
+ u32 ods = 0;
+ u32 mr;
+ u32 wr;
+ u32 emr;
+ u32 emr2;
+ u32 emr3;
+ int dimm_num;
+ int total_dimm = 0;
+
+ /******************************************************
+ ** Assumption: if more than one DIMM, all DIMMs are the same
+ ** as already checked in check_memory_type
+ ******************************************************/
+
+ if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
+ mtsdram(SDRAM_INITPLR0, 0x81B80000);
+ mtsdram(SDRAM_INITPLR1, 0x81900400);
+ mtsdram(SDRAM_INITPLR2, 0x81810000);
+ mtsdram(SDRAM_INITPLR3, 0xff800162);
+ mtsdram(SDRAM_INITPLR4, 0x81900400);
+ mtsdram(SDRAM_INITPLR5, 0x86080000);
+ mtsdram(SDRAM_INITPLR6, 0x86080000);
+ mtsdram(SDRAM_INITPLR7, 0x81000062);
+ } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
+ switch (selected_cas) {
+ case DDR_CAS_3:
+ cas = 3 << 4;
+ break;
+ case DDR_CAS_4:
+ cas = 4 << 4;
+ break;
+ case DDR_CAS_5:
+ cas = 5 << 4;
+ break;
+ default:
+ printf("ERROR: ucode error on selected_cas value %d", selected_cas);
+ spd_ddr_init_hang ();
+ break;
+ }
+
+#if 0
+ /*
+ * ToDo - Still a problem with the write recovery:
+ * On the Corsair CM2X512-5400C4 module, setting write recovery
+ * in the INITPLR reg to the value calculated in program_mode()
+ * results in not correctly working DDR2 memory (crash after
+ * relocation).
+ *
+ * So for now, set the write recovery to 3. This seems to work
+ * on the Corair module too.
+ *
+ * 2007-03-01, sr
+ */
+ switch (write_recovery) {
+ case 3:
+ wr = WRITE_RECOV_3;
+ break;
+ case 4:
+ wr = WRITE_RECOV_4;
+ break;
+ case 5:
+ wr = WRITE_RECOV_5;
+ break;
+ case 6:
+ wr = WRITE_RECOV_6;
+ break;
+ default:
+ printf("ERROR: write recovery not support (%d)", write_recovery);
+ spd_ddr_init_hang ();
+ break;
+ }
+#else
+ wr = WRITE_RECOV_3; /* test-only, see description above */
+#endif
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ total_dimm++;
+ if (total_dimm == 1) {
+ odt = ODT_150_OHM;
+ ods = ODS_FULL;
+ } else if (total_dimm == 2) {
+ odt = ODT_75_OHM;
+ ods = ODS_REDUCED;
+ } else {
+ printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
+ spd_ddr_init_hang ();
+ }
+
+ mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
+ emr = CMD_EMR | SELECT_EMR | odt | ods;
+ emr2 = CMD_EMR | SELECT_EMR2;
+ emr3 = CMD_EMR | SELECT_EMR3;
+ /* NOP - Wait 106 MemClk cycles */
+ mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
+ SDRAM_INITPLR_IMWT_ENCODE(106));
+ udelay(1000);
+ /* precharge 4 MemClk cycles */
+ mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+ SDRAM_INITPLR_IMWT_ENCODE(4));
+ /* EMR2 - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR3 - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* MR w/ DLL reset - 200 cycle wait for DLL reset */
+ mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
+ SDRAM_INITPLR_IMWT_ENCODE(200));
+ udelay(1000);
+ /* precharge 4 MemClk cycles */
+ mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+ SDRAM_INITPLR_IMWT_ENCODE(4));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
+ SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
+ /* EMR OCD Exit */
+ mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ } else {
+ printf("ERROR: ucode error as unknown DDR type in program_initplr");
+ spd_ddr_init_hang ();
+ }
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_MMODE register.
+ * the selected_cas is an output parameter, that will be passed
+ * by caller to call the above program_initplr( )
+ *-----------------------------------------------------------------*/
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_wr_ns;
+ unsigned long t_wr_clk;
+ unsigned long cas_bit;
+ unsigned long cas_index;
+ unsigned long sdram_freq;
+ unsigned long ddr_check;
+ unsigned long mmode;
+ unsigned long tcyc_reg;
+ unsigned long cycle_2_0_clk;
+ unsigned long cycle_2_5_clk;
+ unsigned long cycle_3_0_clk;
+ unsigned long cycle_4_0_clk;
+ unsigned long cycle_5_0_clk;
+ unsigned long max_2_0_tcyc_ns_x_100;
+ unsigned long max_2_5_tcyc_ns_x_100;
+ unsigned long max_3_0_tcyc_ns_x_100;
+ unsigned long max_4_0_tcyc_ns_x_100;
+ unsigned long max_5_0_tcyc_ns_x_100;
+ unsigned long cycle_time_ns_x_100[3];
+ PPC4xx_SYS_INFO board_cfg;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned char cas_4_0_available;
+ unsigned char cas_5_0_available;
+ unsigned long sdr_ddrpll;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
+ debug("sdram_freq=%lu\n", sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_wr_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ cas_4_0_available = TRUE;
+ cas_5_0_available = TRUE;
+ max_2_0_tcyc_ns_x_100 = 10;
+ max_2_5_tcyc_ns_x_100 = 10;
+ max_3_0_tcyc_ns_x_100 = 10;
+ max_4_0_tcyc_ns_x_100 = 10;
+ max_5_0_tcyc_ns_x_100 = 10;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+ debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
+
+ /* For a particular DIMM, grab the three CAS values it supports */
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ if ((tcyc_reg & 0x0F) == 0x0D) {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ } else {
+ printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
+ "in slot %d\n", (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ }
+ } else {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+ }
+ debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
+ cycle_time_ns_x_100[cas_index]);
+ }
+
+ /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
+ /* supported for a particular DIMM. */
+ cas_index = 0;
+
+ if (sdram_ddr1) {
+ /*
+ * DDR devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
+ */
+ if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_0_available = FALSE;
+ }
+ } else {
+ /*
+ * DDR2 devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
+ */
+ if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_5_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+ }
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM mode, SDRAM_MMODE
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MMODE, mmode);
+ mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
+
+ /* add 10 here because of rounding problems */
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
+ cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
+ debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
+ *selected_cas = DDR_CAS_2;
+ } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
+ *selected_cas = DDR_CAS_2_5;
+ } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
+ spd_ddr_init_hang ();
+ }
+ } else { /* DDR2 */
+ debug("cas_3_0_available=%d\n", cas_3_0_available);
+ debug("cas_4_0_available=%d\n", cas_4_0_available);
+ debug("cas_5_0_available=%d\n", cas_5_0_available);
+ if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
+ *selected_cas = DDR_CAS_4;
+ } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
+ *selected_cas = DDR_CAS_5;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
+ printf("cas3=%d cas4=%d cas5=%d\n",
+ cas_3_0_available, cas_4_0_available, cas_5_0_available);
+ printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
+ sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if (sdram_ddr1 == TRUE)
+ mmode |= SDRAM_MMODE_WR_DDR1;
+ else {
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ t_wr_ns = max(t_wr_ns,
+ spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
+ if (sdram_freq != ddr_check)
+ t_wr_clk++;
+
+ switch (t_wr_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
+ break;
+ case 4:
+ mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
+ break;
+ case 5:
+ mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
+ break;
+ default:
+ mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
+ break;
+ }
+ *write_recovery = t_wr_clk;
+ }
+
+ debug("CAS latency = %d\n", *selected_cas);
+ debug("Write recovery = %d\n", *write_recovery);
+
+ mtsdram(SDRAM_MMODE, mmode);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_rtr.
+ *-----------------------------------------------------------------------------*/
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ unsigned long max_refresh_rate;
+ unsigned long dimm_num;
+ unsigned long refresh_rate_type;
+ unsigned long refresh_rate;
+ unsigned long rint;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ unsigned long val;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Refresh Timing Register, SDRAM_RTR
+ *-----------------------------------------------------------------*/
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ max_refresh_rate = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+
+ refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
+ refresh_rate_type &= 0x7F;
+ switch (refresh_rate_type) {
+ case 0:
+ refresh_rate = 15625;
+ break;
+ case 1:
+ refresh_rate = 3906;
+ break;
+ case 2:
+ refresh_rate = 7812;
+ break;
+ case 3:
+ refresh_rate = 31250;
+ break;
+ case 4:
+ refresh_rate = 62500;
+ break;
+ case 5:
+ refresh_rate = 125000;
+ break;
+ default:
+ refresh_rate = 0;
+ printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
+ (unsigned int)dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+
+ max_refresh_rate = max(max_refresh_rate, refresh_rate);
+ }
+ }
+
+ rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
+ mfsdram(SDRAM_RTR, val);
+ mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
+ (SDRAM_RTR_RINT_ENCODE(rint)));
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_TRx registers.
+ *-----------------------------------------------------------------*/
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_rp_ns;
+ unsigned long t_rcd_ns;
+ unsigned long t_rrd_ns;
+ unsigned long t_ras_ns;
+ unsigned long t_rc_ns;
+ unsigned long t_rfc_ns;
+ unsigned long t_wpc_ns;
+ unsigned long t_wtr_ns;
+ unsigned long t_rpc_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rrd_clk;
+ unsigned long t_ras_clk;
+ unsigned long t_rc_clk;
+ unsigned long t_rfc_clk;
+ unsigned long t_wpc_clk;
+ unsigned long t_wtr_clk;
+ unsigned long t_rpc_clk;
+ unsigned long sdtr1, sdtr2, sdtr3;
+ unsigned long ddr_check;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+
+ PPC4xx_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_rp_ns = 0;
+ t_rrd_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ t_rc_ns = 0;
+ t_rfc_ns = 0;
+ t_wpc_ns = 0;
+ t_wtr_ns = 0;
+ t_rpc_ns = 0;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR2)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 1, SDRAM_TR1
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR1, sdtr1);
+ sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
+ SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
+
+ /* default values */
+ sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
+
+ /* normal operations */
+ sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
+
+ mtsdram(SDRAM_SDTR1, sdtr1);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 2, SDRAM_TR2
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR2, sdtr2);
+ sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
+ SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
+ SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
+ SDRAM_SDTR2_RRD_MASK);
+
+ /*
+ * convert t_rcd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
+ if (sdram_freq != ddr_check)
+ t_rcd_clk++;
+
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
+ break;
+ }
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if (sdram_freq < 200000000) {
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ } else {
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ }
+ } else { /* DDR2 */
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ }
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
+ if (sdram_freq != ddr_check)
+ t_wpc_clk++;
+
+ switch (t_wpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
+ if (sdram_freq != ddr_check)
+ t_wtr_clk++;
+
+ switch (t_wtr_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
+ if (sdram_freq != ddr_check)
+ t_rpc_clk++;
+
+ switch (t_rpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
+ break;
+ }
+ }
+
+ /* default value */
+ sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
+
+ /*
+ * convert t_rrd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
+ if (sdram_freq != ddr_check)
+ t_rrd_clk++;
+
+ if (t_rrd_clk == 3)
+ sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
+ else
+ sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
+
+ /*
+ * convert t_rp from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
+ if (sdram_freq != ddr_check)
+ t_rp_clk++;
+
+ switch (t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
+ break;
+ case 6:
+ sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
+ break;
+ }
+
+ mtsdram(SDRAM_SDTR2, sdtr2);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 3, SDRAM_TR3
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR3, sdtr3);
+ sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
+ SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
+
+ /*
+ * convert t_ras from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
+ if (sdram_freq != ddr_check)
+ t_ras_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
+
+ /*
+ * convert t_rc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
+ if (sdram_freq != ddr_check)
+ t_rc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
+
+ /* default xcs value */
+ sdtr3 |= SDRAM_SDTR3_XCS;
+
+ /*
+ * convert t_rfc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
+ if (sdram_freq != ddr_check)
+ t_rfc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
+
+ mtsdram(SDRAM_SDTR3, sdtr3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_bxcf.
+ *-----------------------------------------------------------------------------*/
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long num_col_addr;
+ unsigned long num_ranks;
+ unsigned long num_banks;
+ unsigned long mode;
+ unsigned long ind_rank;
+ unsigned long ind;
+ unsigned long ind_bank;
+ unsigned long bank_0_populated;
+
+ /*------------------------------------------------------------------
+ * Set the BxCF regs. First, wipe out the bank config registers.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_MB0CF, 0x00000000);
+ mtsdram(SDRAM_MB1CF, 0x00000000);
+ mtsdram(SDRAM_MB2CF, 0x00000000);
+ mtsdram(SDRAM_MB3CF, 0x00000000);
+
+ mode = SDRAM_BXCF_M_BE_ENABLE;
+
+ bank_0_populated = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) +1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
+
+ for (ind_bank = 0; ind_bank < 2; ind_bank++) {
+ if (num_banks == 4)
+ ind = 0;
+ else
+ ind = 5 << 8;
+ switch (num_col_addr) {
+ case 0x08:
+ mode |= (SDRAM_BXCF_M_AM_0 + ind);
+ break;
+ case 0x09:
+ mode |= (SDRAM_BXCF_M_AM_1 + ind);
+ break;
+ case 0x0A:
+ mode |= (SDRAM_BXCF_M_AM_2 + ind);
+ break;
+ case 0x0B:
+ mode |= (SDRAM_BXCF_M_AM_3 + ind);
+ break;
+ case 0x0C:
+ mode |= (SDRAM_BXCF_M_AM_4 + ind);
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", (unsigned int)num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
+ bank_0_populated = 1;
+
+ for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
+ mtsdram(SDRAM_MB0CF +
+ ((dimm_num + bank_0_populated + ind_rank) << 2),
+ mode);
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * program memory queue.
+ *-----------------------------------------------------------------*/
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ phys_size_t rank_base_addr;
+ unsigned long rank_reg;
+ phys_size_t rank_size_bytes;
+ unsigned long rank_size_id;
+ unsigned long num_ranks;
+ unsigned long baseadd_size;
+ unsigned long i;
+ unsigned long bank_0_populated = 0;
+ phys_size_t total_size = 0;
+
+ /*------------------------------------------------------------------
+ * Reset the rank_base_address.
+ *-----------------------------------------------------------------*/
+ rank_reg = SDRAM_R0BAS;
+
+ rank_base_addr = 0x00000000;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) + 1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+ /*------------------------------------------------------------------
+ * Set the sizes
+ *-----------------------------------------------------------------*/
+ baseadd_size = 0;
+ switch (rank_size_id) {
+ case 0x01:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
+ total_size = 1024;
+ break;
+ case 0x02:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
+ total_size = 2048;
+ break;
+ case 0x04:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
+ total_size = 4096;
+ break;
+ case 0x08:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_32;
+ total_size = 32;
+ break;
+ case 0x10:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_64;
+ total_size = 64;
+ break;
+ case 0x20:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_128;
+ total_size = 128;
+ break;
+ case 0x40:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_256;
+ total_size = 256;
+ break;
+ case 0x80:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_512;
+ total_size = 512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ (unsigned int)rank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+ rank_size_bytes = total_size << 20;
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
+ bank_0_populated = 1;
+
+ for (i = 0; i < num_ranks; i++) {
+ mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
+ (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
+ baseadd_size));
+ rank_base_addr += rank_size_bytes;
+ }
+ }
+ }
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * Enable high bandwidth access
+ * This is currently not used, but with this setup
+ * it is possible to use it later on in e.g. the Linux
+ * EMAC driver for performance gain.
+ */
+ mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
+
+ /*
+ * Set optimal value for Memory Queue HB/LL Configuration registers
+ */
+ mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
+ SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
+ SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
+ mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
+ SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
+ SDRAM_CONF1LL_RPLM);
+ mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
+#endif
+}
+
+#ifdef CONFIG_DDR_ECC
+/*-----------------------------------------------------------------------------+
+ * program_ecc.
+ *-----------------------------------------------------------------------------*/
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value)
+{
+ unsigned long dimm_num;
+ unsigned long ecc;
+
+ ecc = 0;
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ }
+ if (ecc == 0)
+ return;
+
+ do_program_ecc(tlb_word2_i_value);
+}
+#endif
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+/*-----------------------------------------------------------------------------+
+ * program_DQS_calibration.
+ *-----------------------------------------------------------------------------*/
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long val;
+
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+ mtsdram(SDRAM_RQDC, 0x80000037);
+ mtsdram(SDRAM_RDCC, 0x40000000);
+ mtsdram(SDRAM_RFDC, 0x000001DF);
+
+ test();
+#else
+ /*------------------------------------------------------------------
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ *-----------------------------------------------------------------*/
+
+ mfsdram(SDRAM_RDCC, val);
+ mtsdram(SDRAM_RDCC,
+ (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
+ | SDRAM_RDCC_RSAE_ENABLE);
+
+ /*------------------------------------------------------------------
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
+
+ /*------------------------------------------------------------------
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ * Set RFOS to 1/4 of memclk cycle (0x3f)
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_RFDC, val);
+ mtsdram(SDRAM_RFDC,
+ (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
+ SDRAM_RFDC_RFFD_MASK))
+ | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
+ SDRAM_RFDC_RFFD_ENCODE(0)));
+
+ DQS_calibration_process();
+#endif
+}
+
+static int short_mem_test(void)
+{
+ u32 *membase;
+ u32 bxcr_num;
+ u32 bxcf;
+ int i;
+ int j;
+ phys_size_t base_addr;
+ u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+ int l;
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
+
+ /* Banks enabled */
+ if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+ /* Bank is enabled */
+
+ /*
+ * Only run test on accessable memory (below 2GB)
+ */
+ base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
+ if (base_addr >= CONFIG_MAX_MEM_MAPPED)
+ continue;
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ membase = (u32 *)(u32)base_addr;
+
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (l=0; l<NUMLOOPS; l++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ return 0;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ }
+ }
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ return 1;
+}
+
+#ifndef HARD_CODED_DQS
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void DQS_calibration_process(void)
+{
+ unsigned long rfdc_reg;
+ unsigned long rffd;
+ unsigned long val;
+ long rffd_average;
+ long max_start;
+ long min_end;
+ unsigned long begin_rqfd[MAXRANKS];
+ unsigned long begin_rffd[MAXRANKS];
+ unsigned long end_rqfd[MAXRANKS];
+ unsigned long end_rffd[MAXRANKS];
+ char window_found;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ long max_end;
+ unsigned char fail_found;
+ unsigned char pass_found;
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ u32 rqdc_reg;
+ u32 rqfd;
+ u32 rqfd_start;
+ u32 rqfd_average;
+ int loopi = 0;
+ char str[] = "Auto calibration -";
+ char slash[] = "\\|/-\\|/-";
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+
+ /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
+ rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
+
+ puts(str);
+
+calibration_loop:
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
+#else /* CONFIG_DDR_RQDC_FIXED */
+ /*
+ * On Katmai the complete auto-calibration somehow doesn't seem to
+ * produce the best results, meaning optimal values for RQFD/RFFD.
+ * This was discovered by GDA using a high bandwidth scope,
+ * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ * so now on Katmai "only" RFFD is auto-calibrated.
+ */
+ mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ max_start = 0;
+ min_end = 0;
+ begin_rqfd[0] = 0;
+ begin_rffd[0] = 0;
+ begin_rqfd[1] = 0;
+ begin_rffd[1] = 0;
+ end_rqfd[0] = 0;
+ end_rffd[0] = 0;
+ end_rqfd[1] = 0;
+ end_rffd[1] = 0;
+ window_found = FALSE;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(SDRAM_DLCR, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rffd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rffd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val >> 2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ } /* for rffd */
+
+ /*------------------------------------------------------------------
+ * Set the average RFFD value
+ *-----------------------------------------------------------------*/
+ rffd_average = ((max_start + max_end) >> 1);
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+ /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rqfd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rqfd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+
+ rqfd_average = ((max_start + max_end) >> 1);
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+ /* try again from with a different RQFD start value */
+ rqfd_start++;
+ goto calibration_loop;
+ }
+
+ printf("\nERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ ppc4xx_ibm_ddr2_register_dump();
+ spd_ddr_init_hang ();
+ }
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ mtsdram(SDRAM_RQDC,
+ (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ blank_string(strlen(str));
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ /*
+ * Now complete RDSS configuration as mentioned on page 7 of the AMCC
+ * PowerPC440SP/SPe DDR2 application note:
+ * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+ */
+ mfsdram(SDRAM_RTSR, val);
+ if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
+ mfsdram(SDRAM_RDCC, val);
+ if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
+ val += 0x40000000;
+ mtsdram(SDRAM_RDCC, val);
+ }
+ }
+
+ mfsdram(SDRAM_DLCR, val);
+ debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RQDC, val);
+ debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RFDC, val);
+ debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RDCC, val);
+ debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+}
+#else /* calibration test with hardvalues */
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void test(void)
+{
+ unsigned long dimm_num;
+ unsigned long ecc_temp;
+ unsigned long i, j;
+ unsigned long *membase;
+ unsigned long bxcf[MAXRANKS];
+ unsigned long val;
+ char window_found;
+ char begin_found[MAXDIMMS];
+ char end_found[MAXDIMMS];
+ char search_end[MAXDIMMS];
+ unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, ecc_temp);
+ ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
+ SDRAM_MCOPT1_MCHK_NON);
+
+ window_found = FALSE;
+ begin_found[0] = FALSE;
+ end_found[0] = FALSE;
+ search_end[0] = FALSE;
+ begin_found[1] = FALSE;
+ end_found[1] = FALSE;
+ search_end[1] = FALSE;
+
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
+
+ /* Banks enabled */
+ if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+
+ /* Bank is enabled */
+ membase =
+ (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ break;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ if (j < NUMMEMWORDS)
+ break;
+ }
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (i < NUMMEMTESTS) {
+ if ((end_found[dimm_num] == FALSE) &&
+ (search_end[dimm_num] == TRUE)) {
+ end_found[dimm_num] = TRUE;
+ }
+ if ((end_found[0] == TRUE) &&
+ (end_found[1] == TRUE))
+ break;
+ } else {
+ if (begin_found[dimm_num] == FALSE) {
+ begin_found[dimm_num] = TRUE;
+ search_end[dimm_num] = TRUE;
+ }
+ }
+ } else {
+ begin_found[dimm_num] = TRUE;
+ end_found[dimm_num] = TRUE;
+ }
+ }
+
+ if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
+ window_found = TRUE;
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*------------------------------------------------------------------
+ * Restore the ECC variable to what it originally was
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_MCOPT1,
+ (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
+ | ecc_temp);
+}
+#endif /* !HARD_CODED_DQS */
+#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+#else /* CONFIG_SPD_EEPROM */
+
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
+ * The configuration is performed using static, compile-
+ * time parameters.
+ * Configures the PPC405EX(r) and PPC460EX/GT
+ *---------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ /*
+ * Only run this SDRAM init code once. For NAND booting
+ * targets like Kilauea, we call initdram() early from the
+ * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
+ * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
+ * which calls initdram() again. This time the controller
+ * mustn't be reconfigured again since we're already running
+ * from SDRAM.
+ */
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ unsigned long val;
+
+#if defined(CONFIG_440)
+ mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
+ mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
+ mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
+ mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
+ mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
+ mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
+ mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
+ mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
+#endif
+
+ /* Set Memory Bank Configuration Registers */
+
+ mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
+ mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
+ mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
+ mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
+
+ /* Set Memory Clock Timing Register */
+
+ mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
+
+ /* Set Refresh Time Register */
+
+ mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
+
+ /* Set SDRAM Timing Registers */
+
+ mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
+ mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
+ mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
+
+ /* Set Mode and Extended Mode Registers */
+
+ mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
+ mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
+
+ /* Set Memory Controller Options 1 Register */
+
+ mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
+
+ /* Set Manual Initialization Control Registers */
+
+ mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
+ mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
+ mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
+ mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
+ mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
+ mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
+ mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
+ mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
+ mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
+ mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
+ mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
+ mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
+ mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
+ mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
+ mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
+ mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
+
+ /* Set On-Die Termination Registers */
+
+ mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
+ mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
+ mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
+
+ /* Set Write Timing Register */
+
+ mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
+
+ /*
+ * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
+ * SDRAM0_MCOPT2[IPTR] = 1
+ */
+
+ mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
+ SDRAM_MCOPT2_IPTR_EXECUTE));
+
+ /*
+ * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
+ * completion of initialization.
+ */
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
+
+ /* Set Delay Control Registers */
+
+ mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
+ mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
+ mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
+#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+ /*
+ * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
+ */
+
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
+
+#if defined(CONFIG_440)
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
+#endif
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*------------------------------------------------------------------
+ | DQS calibration.
+ +-----------------------------------------------------------------*/
+ DQS_autocalibration();
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+#if defined(CONFIG_DDR_ECC)
+ do_program_ecc(0);
+#endif /* defined(CONFIG_DDR_ECC) */
+
+#if defined(CONFIG_440)
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
+#endif
+
+ ppc4xx_ibm_ddr2_register_dump();
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
+}
+#endif /* CONFIG_SPD_EEPROM */
+
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_440)
+u32 mfdcr_any(u32 dcr)
+{
+ u32 val;
+
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ val = mfdcr(SDRAM_R0BAS + 0);
+ break;
+ case SDRAM_R0BAS + 1:
+ val = mfdcr(SDRAM_R0BAS + 1);
+ break;
+ case SDRAM_R0BAS + 2:
+ val = mfdcr(SDRAM_R0BAS + 2);
+ break;
+ case SDRAM_R0BAS + 3:
+ val = mfdcr(SDRAM_R0BAS + 3);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ val = 0; /* just to satisfy the compiler */
+ }
+
+ return val;
+}
+
+void mtdcr_any(u32 dcr, u32 val)
+{
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ mtdcr(SDRAM_R0BAS + 0, val);
+ break;
+ case SDRAM_R0BAS + 1:
+ mtdcr(SDRAM_R0BAS + 1, val);
+ break;
+ case SDRAM_R0BAS + 2:
+ mtdcr(SDRAM_R0BAS + 2, val);
+ break;
+ case SDRAM_R0BAS + 3:
+ mtdcr(SDRAM_R0BAS + 3, val);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ }
+}
+#endif /* defined(CONFIG_440) */
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+
+inline void ppc4xx_ibm_ddr2_register_dump(void)
+{
+#if defined(DEBUG)
+ printf("\nPPC4xx IBM DDR2 Register Dump:\n");
+
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
+#endif /* (defined(CONFIG_440SP) || ... */
+#if defined(CONFIG_405EX)
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
+#endif /* defined(CONFIG_405EX) */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
+ /*
+ * OPART is only used as a trigger register.
+ *
+ * No data is contained in this register, and reading or writing
+ * to is can cause bad things to happen (hangs). Just skip it and
+ * report "N/A".
+ */
+ printf("%20s = N/A\n", "SDRAM_OPART");
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
+#endif /* defined(DEBUG) */
+}
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405: 405EX
+ * 440/460: 440SP/440SPe/460EX/460GT/460SX
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Adam Graham <agraham@amcc.com>
+ *
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#undef DEBUG
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+
+/*
+ * Only compile the DDR auto-calibration code for NOR boot and
+ * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+
+#define MAXBXCF 4
+#define SDRAM_RXBAS_SHIFT_1M 20
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+#define NUMMEMTESTS 24
+#else
+#define NUMMEMTESTS 8
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+#define NUMLOOPS 1 /* configure as you deem approporiate */
+#define NUMMEMWORDS 16
+
+#define SDRAM_RDCC_RDSS_VAL(n) SDRAM_RDCC_RDSS_DECODE(ddr_rdss_opt(n))
+
+/* Private Structure Definitions */
+
+struct autocal_regs {
+ u32 rffd;
+ u32 rqfd;
+};
+
+struct ddrautocal {
+ u32 rffd;
+ u32 rffd_min;
+ u32 rffd_max;
+ u32 rffd_size;
+ u32 rqfd;
+ u32 rqfd_size;
+ u32 rdcc;
+ u32 flags;
+};
+
+struct sdram_timing {
+ u32 wrdtr;
+ u32 clktr;
+};
+
+struct sdram_timing_clks {
+ u32 wrdtr;
+ u32 clktr;
+ u32 rdcc;
+ u32 flags;
+};
+
+struct autocal_clks {
+ struct sdram_timing_clks clocks;
+ struct ddrautocal autocal;
+};
+
+/*--------------------------------------------------------------------------+
+ * Prototypes
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+static u32 DQS_calibration_methodA(struct ddrautocal *);
+static u32 program_DQS_calibration_methodA(struct ddrautocal *);
+#else
+static u32 DQS_calibration_methodB(struct ddrautocal *);
+static u32 program_DQS_calibration_methodB(struct ddrautocal *);
+#endif
+static int short_mem_test(u32 *);
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+ hang();
+}
+void
+spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+#endif /* defined(CONFIG_SPD_EEPROM) */
+
+ulong __ddr_scan_option(ulong default_val)
+{
+ return default_val;
+}
+ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
+
+u32 __ddr_rdss_opt(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt")));
+
+
+static u32 *get_membase(int bxcr_num)
+{
+ ulong bxcf;
+ u32 *membase;
+
+#if defined(SDRAM_R0BAS)
+ /* BAS from Memory Queue rank reg. */
+ membase =
+ (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+ bxcf = 0; /* just to satisfy the compiler */
+#else
+ /* BAS from SDRAM_MBxCF mem rank reg. */
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+ membase = (u32 *)((bxcf & 0xfff80000) << 3);
+#endif
+
+ return membase;
+}
+
+static inline void ecc_clear_status_reg(void)
+{
+ mtsdram(SDRAM_ECCES, 0xffffffff);
+#if defined(SDRAM_R0BAS)
+ mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
+#endif
+}
+
+/*
+ * Reset and relock memory DLL after SDRAM_CLKTR change
+ */
+static inline void relock_memory_DLL(void)
+{
+ u32 reg;
+
+ mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
+
+ do {
+ mfsdram(SDRAM_MCSTAT, reg);
+ } while (!(reg & SDRAM_MCSTAT_MIC_COMP));
+
+ mfsdram(SDRAM_MCOPT2, reg);
+ mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
+}
+
+static int ecc_check_status_reg(void)
+{
+ u32 ecc_status;
+
+ /*
+ * Compare suceeded, now check
+ * if got ecc error. If got an
+ * ecc error, then don't count
+ * this as a passing value
+ */
+ mfsdram(SDRAM_ECCES, ecc_status);
+ if (ecc_status != 0x00000000) {
+ /* clear on error */
+ ecc_clear_status_reg();
+ /* ecc check failure */
+ return 0;
+ }
+ ecc_clear_status_reg();
+ sync();
+
+ return 1;
+}
+
+/* return 1 if passes, 0 if fail */
+static int short_mem_test(u32 *base_address)
+{
+ int i, j, l;
+ u32 ecc_mode = 0;
+
+ ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
+ /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+ /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
+ /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
+ /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
+ /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
+ /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
+ /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
+ /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
+ /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
+ /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
+ /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
+ /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
+ /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
+ /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
+ /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
+ /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
+ /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+ };
+
+ mfsdram(SDRAM_MCOPT1, ecc_mode);
+ if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
+ SDRAM_MCOPT1_MCHK_CHK_REP) {
+ ecc_clear_status_reg();
+ sync();
+ ecc_mode = 1;
+ } else {
+ ecc_mode = 0;
+ }
+
+ /*
+ * Run the short memory test.
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ base_address[j] = test[i][j];
+ ppcDcbf((ulong)&(base_address[j]));
+ }
+ sync();
+ iobarrier_rw();
+ for (l = 0; l < NUMLOOPS; l++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (base_address[j] != test[i][j]) {
+ ppcDcbf((u32)&(base_address[j]));
+ return 0;
+ } else {
+ if (ecc_mode) {
+ if (!ecc_check_status_reg())
+ return 0;
+ }
+ }
+ ppcDcbf((u32)&(base_address[j]));
+ } /* for (j = 0; j < NUMMEMWORDS; j++) */
+ sync();
+ iobarrier_rw();
+ } /* for (l=0; l<NUMLOOPS; l++) */
+ }
+
+ return 1;
+}
+
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodA.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
+{
+ u32 pass_result = 0;
+
+#ifdef DEBUG
+ ulong temp;
+
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+ pass_result = DQS_calibration_methodA(ddrcal);
+
+ return pass_result;
+}
+
+/*
+ * DQS_calibration_methodA()
+ *
+ * Autocalibration Method A
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
+ * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD
+ * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * DQS_Valid_Window[i] = 1; RQDC.RQFD
+ * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD
+ * }
+ * }
+ * }
+ */
+static u32 DQS_calibration_methodA(struct ddrautocal *cal)
+{
+ ulong rfdc_reg;
+ ulong rffd;
+
+ ulong rqdc_reg;
+ ulong rqfd;
+
+ u32 *membase;
+ ulong bxcf;
+ int rqfd_average;
+ int bxcr_num;
+ int rffd_average;
+ int pass;
+ u32 passed = 0;
+
+ int in_window;
+ struct autocal_regs curr_win_min;
+ struct autocal_regs curr_win_max;
+ struct autocal_regs best_win_min;
+ struct autocal_regs best_win_max;
+ struct autocal_regs loop_win_min;
+ struct autocal_regs loop_win_max;
+
+#ifdef DEBUG
+ ulong temp;
+#endif
+ ulong rdcc;
+
+ char slash[] = "\\|/-\\|/-";
+ int loopi = 0;
+
+ /* start */
+ in_window = 0;
+
+ memset(&curr_win_min, 0, sizeof(curr_win_min));
+ memset(&curr_win_max, 0, sizeof(curr_win_max));
+ memset(&best_win_min, 0, sizeof(best_win_min));
+ memset(&best_win_max, 0, sizeof(best_win_max));
+ memset(&loop_win_min, 0, sizeof(loop_win_min));
+ memset(&loop_win_max, 0, sizeof(loop_win_max));
+
+ rdcc = 0;
+
+ /*
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ */
+ mtsdram(SDRAM_RDCC,
+ ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
+ mfsdram(SDRAM_RTSR, temp);
+ debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
+ mfsdram(SDRAM_FCSR, temp);
+ debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ */
+ mtsdram(SDRAM_RQDC,
+ SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RQDC, temp);
+ debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ */
+ mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+ SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RFDC, temp);
+ debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
+#endif
+
+ putc(' ');
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+ curr_win_min.rffd = 0;
+ curr_win_max.rffd = 0;
+ in_window = 0;
+
+ for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC,
+ rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass = short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcr_num */
+
+ /* If this value passed update RFFD windows */
+ if (pass && !in_window) { /* at the start of window */
+ in_window = 1;
+ curr_win_min.rffd = curr_win_max.rffd = rffd;
+ curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
+ mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
+ } else if (!pass && in_window) { /* at end of window */
+ in_window = 0;
+ } else if (pass && in_window) { /* within the window */
+ curr_win_max.rffd = rffd;
+ curr_win_max.rqfd = rqfd;
+ }
+ /* else if (!pass && !in_window)
+ skip - no pass, not currently in a window */
+
+ if (in_window) {
+ if ((curr_win_max.rffd - curr_win_min.rffd) >
+ (best_win_max.rffd - best_win_min.rffd)) {
+ best_win_min.rffd = curr_win_min.rffd;
+ best_win_max.rffd = curr_win_max.rffd;
+
+ best_win_min.rqfd = curr_win_min.rqfd;
+ best_win_max.rqfd = curr_win_max.rqfd;
+ cal->rdcc = rdcc;
+ }
+ passed = 1;
+ }
+ } /* RFDC.RFFD */
+
+ /*
+ * save-off the best window results of the RFDC.RFFD
+ * for this RQDC.RQFD setting
+ */
+ /*
+ * if (just ended RFDC.RFDC loop pass window) >
+ * (prior RFDC.RFFD loop pass window)
+ */
+ if ((best_win_max.rffd - best_win_min.rffd) >
+ (loop_win_max.rffd - loop_win_min.rffd)) {
+ loop_win_min.rffd = best_win_min.rffd;
+ loop_win_max.rffd = best_win_max.rffd;
+ loop_win_min.rqfd = rqfd;
+ loop_win_max.rqfd = rqfd;
+ debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
+ "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
+ loop_win_min.rqfd, loop_win_max.rqfd,
+ loop_win_min.rffd, loop_win_max.rffd);
+ }
+ } /* RQDC.RQFD */
+
+ putc('\b');
+
+ debug("\n");
+
+ if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
+ (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
+ (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
+ passed = 0;
+ }
+
+ /*
+ * Need to program RQDC before RFDC.
+ */
+ debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
+ debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
+ rqfd_average = loop_win_max.rqfd;
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
+ debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
+ rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+ debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+ /* if something passed, then return the size of the largest window */
+ if (passed != 0) {
+ passed = loop_win_max.rffd - loop_win_min.rffd;
+ cal->rqfd = rqfd_average;
+ cal->rffd = rffd_average;
+ cal->rffd_min = loop_win_min.rffd;
+ cal->rffd_max = loop_win_max.rffd;
+ }
+
+ return (u32)passed;
+}
+
+#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
+{
+ u32 pass_result = 0;
+
+#ifdef DEBUG
+ ulong temp;
+#endif
+
+ /*
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ */
+ mtsdram(SDRAM_RDCC,
+ ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ */
+ mtsdram(SDRAM_RQDC,
+#if defined(CONFIG_DDR_RQDC_START_VAL)
+ SDRAM_RQDC_RQDE_ENABLE |
+ SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
+#else
+ SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
+#endif
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RQDC, temp);
+ debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ */
+ mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+ SDRAM_RFDC_RFOS_ENCODE(0) |
+ SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RFDC, temp);
+ debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
+#endif
+
+ pass_result = DQS_calibration_methodB(ddrcal);
+
+ return pass_result;
+}
+
+/*
+ * DQS_calibration_methodB()
+ *
+ * Autocalibration Method B
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
+ * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
+ *
+ * for (j = 0; j < Entire Feedback Range; j++) {
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * FDBK_Valid_Window[j] = 1;
+ * }
+ * }
+ *
+ * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
+ *
+ * for (i = 0; i < Entire DQS Range; i++) {
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * DQS_Valid_Window[i] = 1;
+ * }
+ * }
+ *
+ * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
+ */
+/*-----------------------------------------------------------------------------+
+| DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 DQS_calibration_methodB(struct ddrautocal *cal)
+{
+ ulong rfdc_reg;
+ ulong rffd;
+
+ ulong rqdc_reg;
+ ulong rqfd;
+
+ ulong rdcc;
+
+ u32 *membase;
+ ulong bxcf;
+ int rqfd_average;
+ int bxcr_num;
+ int rffd_average;
+ int pass;
+ uint passed = 0;
+
+ int in_window;
+ u32 curr_win_min, curr_win_max;
+ u32 best_win_min, best_win_max;
+ u32 size = 0;
+
+ /*------------------------------------------------------------------
+ | Test to determine the best read clock delay tuning bits.
+ |
+ | Before the DDR controller can be used, the read clock delay needs to
+ | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ | This value cannot be hardcoded into the program because it changes
+ | depending on the board's setup and environment.
+ | To do this, all delay values are tested to see if they
+ | work or not. By doing this, you get groups of fails with groups of
+ | passing values. The idea is to find the start and end of a passing
+ | window and take the center of it to use as the read clock delay.
+ |
+ | A failure has to be seen first so that when we hit a pass, we know
+ | that it is truely the start of the window. If we get passing values
+ | to start off with, we don't know if we are at the start of the window
+ |
+ | The code assumes that a failure will always be found.
+ | If a failure is not found, there is no easy way to get the middle
+ | of the passing window. I guess we can pretty much pick any value
+ | but some values will be better than others. Since the lowest speed
+ | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ | from experimentation it is safe to say you will always have a failure
+ +-----------------------------------------------------------------*/
+
+ debug("\n\n");
+
+ in_window = 0;
+ rdcc = 0;
+
+ curr_win_min = curr_win_max = 0;
+ best_win_min = best_win_max = 0;
+ for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ pass = 1;
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass &= short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ /* If this value passed */
+ if (pass && !in_window) { /* start of passing window */
+ in_window = 1;
+ curr_win_min = curr_win_max = rffd;
+ mfsdram(SDRAM_RDCC, rdcc); /* record this value */
+ } else if (!pass && in_window) { /* end passing window */
+ in_window = 0;
+ } else if (pass && in_window) { /* within the passing window */
+ curr_win_max = rffd;
+ }
+
+ if (in_window) {
+ if ((curr_win_max - curr_win_min) >
+ (best_win_max - best_win_min)) {
+ best_win_min = curr_win_min;
+ best_win_max = curr_win_max;
+ cal->rdcc = rdcc;
+ }
+ passed = 1;
+ }
+ } /* for rffd */
+
+ if ((best_win_min == 0) && (best_win_max == 0))
+ passed = 0;
+ else
+ size = best_win_max - best_win_min;
+
+ debug("RFFD Min: 0x%x\n", best_win_min);
+ debug("RFFD Max: 0x%x\n", best_win_max);
+ rffd_average = ((best_win_min + best_win_max) / 2);
+
+ cal->rffd_min = best_win_min;
+ cal->rffd_max = best_win_max;
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+ rffd = rffd_average;
+ in_window = 0;
+
+ curr_win_min = curr_win_max = 0;
+ best_win_min = best_win_max = 0;
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ pass = 1;
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass &= short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ /* If this value passed */
+ if (pass && !in_window) {
+ in_window = 1;
+ curr_win_min = curr_win_max = rqfd;
+ } else if (!pass && in_window) {
+ in_window = 0;
+ } else if (pass && in_window) {
+ curr_win_max = rqfd;
+ }
+
+ if (in_window) {
+ if ((curr_win_max - curr_win_min) >
+ (best_win_max - best_win_min)) {
+ best_win_min = curr_win_min;
+ best_win_max = curr_win_max;
+ }
+ passed = 1;
+ }
+ } /* for rqfd */
+
+ if ((best_win_min == 0) && (best_win_max == 0))
+ passed = 0;
+
+ debug("RQFD Min: 0x%x\n", best_win_min);
+ debug("RQFD Max: 0x%x\n", best_win_max);
+ rqfd_average = ((best_win_min + best_win_max) / 2);
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+
+ /*
+ * Need to program RQDC before RFDC. The value is read above.
+ * That is the reason why auto cal not work.
+ * See, comments below.
+ */
+ mtsdram(SDRAM_RQDC, rqdc_reg);
+ mtsdram(SDRAM_RFDC, rfdc_reg);
+
+ debug("RQDC: 0x%08X\n", rqdc_reg);
+ debug("RFDC: 0x%08X\n", rfdc_reg);
+
+ /* if something passed, then return the size of the largest window */
+ if (passed != 0) {
+ passed = size;
+ cal->rqfd = rqfd_average;
+ cal->rffd = rffd_average;
+ }
+
+ return (uint)passed;
+}
+#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*
+ * Default table for DDR auto-calibration of all
+ * possible WRDTR and CLKTR values.
+ * Table format is:
+ * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
+ *
+ * Table is terminated with {-1, -1} value pair.
+ *
+ * Board vendors can specify their own board specific subset of
+ * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
+ * pairs via a board defined ddr_scan_option() function.
+ */
+struct sdram_timing full_scan_options[] = {
+ {0, 0}, {0, 1}, {0, 2}, {0, 3},
+ {1, 0}, {1, 1}, {1, 2}, {1, 3},
+ {2, 0}, {2, 1}, {2, 2}, {2, 3},
+ {3, 0}, {3, 1}, {3, 2}, {3, 3},
+ {4, 0}, {4, 1}, {4, 2}, {4, 3},
+ {5, 0}, {5, 1}, {5, 2}, {5, 3},
+ {6, 0}, {6, 1}, {6, 2}, {6, 3},
+ {-1, -1}
+};
+
+/*---------------------------------------------------------------------------+
+| DQS_calibration.
++----------------------------------------------------------------------------*/
+u32 DQS_autocalibration(void)
+{
+ u32 wdtr;
+ u32 clkp;
+ u32 result = 0;
+ u32 best_result = 0;
+ u32 best_rdcc;
+ struct ddrautocal ddrcal;
+ struct autocal_clks tcal;
+ ulong rfdc_reg;
+ ulong rqdc_reg;
+ u32 val;
+ int verbose_lvl = 0;
+ char *str;
+ char slash[] = "\\|/-\\|/-";
+ int loopi = 0;
+ struct sdram_timing *scan_list;
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+ int i;
+ char tmp[64]; /* long enough for environment variables */
+#endif
+
+ memset(&tcal, 0, sizeof(tcal));
+
+ ddr_scan_option((ulong)full_scan_options);
+
+ scan_list =
+ (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
+
+ mfsdram(SDRAM_MCOPT1, val);
+ if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
+ str = "ECC Auto calibration -";
+ else
+ str = "Auto calibration -";
+
+ puts(str);
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+ i = getenv_r("autocalib", tmp, sizeof(tmp));
+ if (i < 0)
+ strcpy(tmp, CONFIG_AUTOCALIB);
+
+ if (strcmp(tmp, "final") == 0) {
+ /* display the final autocalibration results only */
+ verbose_lvl = 1;
+ } else if (strcmp(tmp, "loop") == 0) {
+ /* display summary autocalibration info per iteration */
+ verbose_lvl = 2;
+ } else if (strcmp(tmp, "display") == 0) {
+ /* display full debug autocalibration window info. */
+ verbose_lvl = 3;
+ }
+#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+ best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
+
+ while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
+ wdtr = scan_list->wrdtr;
+ clkp = scan_list->clktr;
+
+ mfsdram(SDRAM_WRDTR, val);
+ val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
+ mtsdram(SDRAM_WRDTR, (val |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
+
+ mtsdram(SDRAM_CLKTR, clkp << 30);
+
+ relock_memory_DLL();
+
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+#ifdef DEBUG
+ debug("\n");
+ debug("*** --------------\n");
+ mfsdram(SDRAM_WRDTR, val);
+ debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
+ mfsdram(SDRAM_CLKTR, val);
+ debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
+#endif
+
+ debug("\n");
+ if (verbose_lvl > 2) {
+ printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
+ printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
+ }
+
+ memset(&ddrcal, 0, sizeof(ddrcal));
+
+ /*
+ * DQS calibration.
+ */
+ /*
+ * program_DQS_calibration_method[A|B]() returns 0 if no
+ * passing RFDC.[RFFD] window is found or returns the size
+ * of the best passing window; in the case of a found passing
+ * window, the ddrcal will contain the values of the best
+ * window RQDC.[RQFD] and RFDC.[RFFD].
+ */
+
+ /*
+ * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
+ * Default is methodB.
+ * Defined the autocalibration method in the board specific
+ * header file.
+ * Please see include/configs/kilauea.h for an example for
+ * a board specific implementation.
+ */
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+ result = program_DQS_calibration_methodA(&ddrcal);
+#else
+ result = program_DQS_calibration_methodB(&ddrcal);
+#endif
+
+ sync();
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ val = ddrcal.rdcc; /* RDCC from the best passing window */
+
+ udelay(100);
+
+ if (verbose_lvl > 1) {
+ char *tstr;
+ switch ((val >> 30)) {
+ case 0:
+ if (result != 0)
+ tstr = "T1";
+ else
+ tstr = "N/A";
+ break;
+ case 1:
+ tstr = "T2";
+ break;
+ case 2:
+ tstr = "T3";
+ break;
+ case 3:
+ tstr = "T4";
+ break;
+ default:
+ tstr = "unknown";
+ break;
+ }
+ printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
+ "max-min(0x%04x)(0x%04x), RDCC: %s\n",
+ wdtr, clkp, result, best_result,
+ ddrcal.rffd_min, ddrcal.rffd_max, tstr);
+ }
+
+ /*
+ * The DQS calibration "result" is either "0"
+ * if no passing window was found, or is the
+ * size of the RFFD passing window.
+ */
+ /*
+ * want the lowest Read Sample Cycle Select
+ */
+ val = SDRAM_RDCC_RDSS_DECODE(val);
+ debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
+ val, best_rdcc);
+
+ if ((result != 0) &&
+ (val >= SDRAM_RDCC_RDSS_VAL(SDRAM_RDCC_RDSS_T2))) {
+ if (((result == best_result) && (val < best_rdcc)) ||
+ ((result > best_result) && (val <= best_rdcc))) {
+ tcal.autocal.flags = 1;
+ debug("*** (%d)(%d) result passed window "
+ "size: 0x%08x, rqfd = 0x%08x, "
+ "rffd = 0x%08x, rdcc = 0x%08x\n",
+ wdtr, clkp, result, ddrcal.rqfd,
+ ddrcal.rffd, ddrcal.rdcc);
+
+ /*
+ * Save the SDRAM_WRDTR and SDRAM_CLKTR
+ * settings for the largest returned
+ * RFFD passing window size.
+ */
+ best_rdcc = val;
+ tcal.clocks.wrdtr = wdtr;
+ tcal.clocks.clktr = clkp;
+ tcal.clocks.rdcc = SDRAM_RDCC_RDSS_ENCODE(val);
+ tcal.autocal.rqfd = ddrcal.rqfd;
+ tcal.autocal.rffd = ddrcal.rffd;
+ best_result = result;
+
+ if (verbose_lvl > 2) {
+ printf("** (%d)(%d) "
+ "best result: 0x%04x\n",
+ wdtr, clkp,
+ best_result);
+ printf("** (%d)(%d) "
+ "best WRDTR: 0x%04x\n",
+ wdtr, clkp,
+ tcal.clocks.wrdtr);
+ printf("** (%d)(%d) "
+ "best CLKTR: 0x%04x\n",
+ wdtr, clkp,
+ tcal.clocks.clktr);
+ printf("** (%d)(%d) "
+ "best RQDC: 0x%04x\n",
+ wdtr, clkp,
+ tcal.autocal.rqfd);
+ printf("** (%d)(%d) "
+ "best RFDC: 0x%04x\n",
+ wdtr, clkp,
+ tcal.autocal.rffd);
+ printf("** (%d)(%d) "
+ "best RDCC: 0x%08x\n",
+ wdtr, clkp,
+ (u32)tcal.clocks.rdcc);
+ mfsdram(SDRAM_RTSR, val);
+ printf("** (%d)(%d) best "
+ "loop RTSR: 0x%08x\n",
+ wdtr, clkp, val);
+ mfsdram(SDRAM_FCSR, val);
+ printf("** (%d)(%d) best "
+ "loop FCSR: 0x%08x\n",
+ wdtr, clkp, val);
+ }
+ }
+ } /* if ((result != 0) && (val >= (ddr_rdss_opt()))) */
+ scan_list++;
+ } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
+
+ if (tcal.autocal.flags == 1) {
+ if (verbose_lvl > 0) {
+ printf("*** --------------\n");
+ printf("*** best_result window size: %d\n",
+ best_result);
+ printf("*** best_result WRDTR: 0x%04x\n",
+ tcal.clocks.wrdtr);
+ printf("*** best_result CLKTR: 0x%04x\n",
+ tcal.clocks.clktr);
+ printf("*** best_result RQFD: 0x%04x\n",
+ tcal.autocal.rqfd);
+ printf("*** best_result RFFD: 0x%04x\n",
+ tcal.autocal.rffd);
+ printf("*** best_result RDCC: 0x%04x\n",
+ tcal.clocks.rdcc);
+ printf("*** --------------\n");
+ printf("\n");
+ }
+
+ /*
+ * if got best passing result window, then lock in the
+ * best CLKTR, WRDTR, RQFD, and RFFD values
+ */
+ mfsdram(SDRAM_WRDTR, val);
+ mtsdram(SDRAM_WRDTR, (val &
+ ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
+ (tcal.clocks.wrdtr << 25)));
+
+ mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
+
+ relock_memory_DLL();
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg |
+ SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
+ rqdc_reg);
+
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC, rfdc_reg |
+ SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
+ rfdc_reg);
+ mfsdram(SDRAM_RDCC, val);
+ debug("*** SDRAM_RDCC 0x%08x\n", val);
+ } else {
+ /*
+ * no valid windows were found
+ */
+ printf("DQS memory calibration window can not be determined, "
+ "terminating u-boot.\n");
+ ppc4xx_ibm_ddr2_register_dump();
+ spd_ddr_init_hang();
+ }
+
+ blank_string(strlen(str));
+
+ return 0;
+}
+#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+u32 DQS_autocalibration(void)
+{
+ return 0;
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
--- /dev/null
+/*-----------------------------------------------------------------------------+
+ * This source code is dual-licensed. You may use it under the terms of
+ * the GNU General Public license version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+ *
+ * File Name: 405gp_pci.c
+ *
+ * Function: Initialization code for the 405GP PCI Configuration regs.
+ *
+ * Author: Mark Game
+ *
+ * Change Activity-
+ *
+ * Date Description of Change BY
+ * --------- --------------------- ---
+ * 09-Sep-98 Created MCG
+ * 02-Nov-98 Removed External arbiter selected message JWB
+ * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB
+ * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG
+ * from (0 to n) to (1 to n).
+ * 17-May-99 Port to Walnut JWB
+ * 17-Jun-99 Updated for VGA support JWB
+ * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB
+ * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG
+ * target latency timer values are not supported).
+ * Should be fixed in pass 2.
+ * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB
+ * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
+ * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
+ * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
+ * really required after a reset since PMMxMAs are already
+ * disabled but is a good practice nonetheless. JWB
+ * 12-Jun-01 stefan.roese@esd-electronics.com
+ * - PCI host/adapter handling reworked
+ * 09-Jul-01 stefan.roese@esd-electronics.com
+ * - PCI host now configures from device 0 (not 1) to max_dev,
+ * (host configures itself)
+ * - On CPCI-405 pci base address and size is generated from
+ * SDRAM and FLASH size (CFG regs not used anymore)
+ * - Some minor changes for CPCI-405-A (adapter version)
+ * 14-Sep-01 stefan.roese@esd-electronics.com
+ * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
+ * 28-Sep-01 stefan.roese@esd-electronics.com
+ * - Changed pci master configuration for linux compatibility
+ * (no need for bios_fixup() anymore)
+ * 26-Feb-02 stefan.roese@esd-electronics.com
+ * - Bug fixed in pci configuration (Andrew May)
+ * - Removed pci class code init for CPCI405 board
+ * 15-May-02 stefan.roese@esd-electronics.com
+ * - New vga device handling
+ * 29-May-02 stefan.roese@esd-electronics.com
+ * - PCI class code init added (if defined)
+ *----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <asm/4xx_pci.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#ifdef CONFIG_PCI
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+
+#if defined(CONFIG_PMC405)
+ushort pmc405_pci_subsys_deviceid(void);
+#endif
+
+/*#define DEBUG*/
+
+/*
+ * Board-specific pci initialization
+ * Platform code can reimplement pci_pre_init() if needed
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+#if defined(CONFIG_405EP)
+ /*
+ * Enable the internal PCI arbiter by default.
+ *
+ * On 405EP CPUs the internal arbiter can be controlled
+ * by the I2C strapping EEPROM. If you want to do so
+ * or if you want to disable the arbiter pci_pre_init()
+ * must be reimplemented without enabling the arbiter.
+ * The arbiter is enabled in this place because of
+ * compatibility reasons.
+ */
+ mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
+ return 1;
+}
+int pci_pre_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_pre_init")));
+
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+ if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
+ return 1;
+#elif defined (CONFIG_405EP)
+ if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
+ return 1;
+#endif
+ return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
+
+/*-----------------------------------------------------------------------------+
+ * pci_init. Initializes the 405GP PCI Configuration regs.
+ *-----------------------------------------------------------------------------*/
+void pci_405gp_init(struct pci_controller *hose)
+{
+ int i, reg_num = 0;
+ bd_t *bd = gd->bd;
+
+ unsigned short temp_short;
+ unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+ char *ptmla_str, *ptmms_str;
+#endif
+ unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+ unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
+#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
+ unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
+ unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
+ unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
+ unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
+#else
+ unsigned long pmmla[3] = {0x80000000, 0,0};
+ unsigned long pmmma[3] = {0xC0000001, 0,0};
+ unsigned long pmmpcila[3] = {0x80000000, 0,0};
+ unsigned long pmmpciha[3] = {0x00000000, 0,0};
+#endif
+#ifdef CONFIG_PCI_PNP
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ char *s;
+#endif
+#endif
+
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+ ptmla_str = getenv("ptm1la");
+ ptmms_str = getenv("ptm1ms");
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
+ ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
+ }
+
+ ptmla_str = getenv("ptm2la");
+ ptmms_str = getenv("ptm2ms");
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
+ ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
+ }
+#endif
+
+ /*
+ * Register the hose
+ */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* ISA/PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ MIN_PCI_PCI_IOADDR,
+ MIN_PLB_PCI_IOADDR,
+ 0x10000,
+ PCI_REGION_IO);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ 0x00800000,
+ 0xe8800000,
+ 0x03800000,
+ PCI_REGION_IO);
+
+ reg_num = 2;
+
+ /* Memory spaces */
+ for (i=0; i<2; i++)
+ if (ptmms[i] & 1)
+ {
+ if (!i) hose->pci_fb = hose->regions + reg_num;
+
+ pci_set_region(hose->regions + reg_num++,
+ ptmpcila[i], ptmla[i],
+ ~(ptmms[i] & 0xfffff000) + 1,
+ PCI_REGION_MEM |
+ PCI_REGION_SYS_MEMORY);
+ }
+
+ /* PCI memory spaces */
+ for (i=0; i<3; i++)
+ if (pmmma[i] & 1)
+ {
+ pci_set_region(hose->regions + reg_num++,
+ pmmpcila[i], pmmla[i],
+ ~(pmmma[i] & 0xfffff000) + 1,
+ PCI_REGION_MEM);
+ }
+
+ hose->region_count = reg_num;
+
+ pci_setup_indirect(hose,
+ PCICFGADR,
+ PCICFGDATA);
+
+ if (hose->pci_fb)
+ pciauto_region_init(hose->pci_fb);
+
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init(hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+
+ pci_register_hose(hose);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Master configuration.
+ * Map one 512 MB range of PLB/processor addresses to PCI memory space.
+ * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
+ out32r(PMM0LA, pmmla[0]);
+ out32r(PMM0PCILA, pmmpcila[0]);
+ out32r(PMM0PCIHA, pmmpciha[0]);
+ out32r(PMM0MA, pmmma[0]);
+
+ /*--------------------------------------------------------------------------+
+ * PMM1 is not used. Initialize them to zero.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM1MA, (pmmma[1]&~0x1));
+ out32r(PMM1LA, pmmla[1]);
+ out32r(PMM1PCILA, pmmpcila[1]);
+ out32r(PMM1PCIHA, pmmpciha[1]);
+ out32r(PMM1MA, pmmma[1]);
+
+ /*--------------------------------------------------------------------------+
+ * PMM2 is not used. Initialize them to zero.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM2MA, (pmmma[2]&~0x1));
+ out32r(PMM2LA, pmmla[2]);
+ out32r(PMM2PCILA, pmmpcila[2]);
+ out32r(PMM2PCIHA, pmmpciha[2]);
+ out32r(PMM2MA, pmmma[2]);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Target configuration. (PTM1)
+ * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
+ *--------------------------------------------------------------------------*/
+ out32r(PTM1LA, ptmla[0]); /* insert address */
+ out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Target configuration. (PTM2)
+ *--------------------------------------------------------------------------*/
+ out32r(PTM2LA, ptmla[1]); /* insert address */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
+
+ if (ptmms[1] == 0)
+ {
+ out32r(PTM2MS, 0x00000001); /* set enable bit */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
+ out32r(PTM2MS, 0x00000000); /* disable */
+ }
+ else
+ {
+ out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */
+ }
+
+ /*
+ * Insert Subsystem Vendor and Device ID
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+#ifdef CONFIG_CPCI405
+ if (is_pci_host(hose))
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+ else
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
+#else
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+#endif
+
+ /*
+ * Insert Class-code
+ */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+ pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
+
+ /*--------------------------------------------------------------------------+
+ * If PCI speed = 66MHz, set 66MHz capable bit.
+ *--------------------------------------------------------------------------*/
+ if (bd->bi_pci_busfreq >= 66000000) {
+ pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
+ }
+
+#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ if (is_pci_host(hose) ||
+ (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+ {
+ /*--------------------------------------------------------------------------+
+ * Write the 405GP PCI Configuration regs.
+ * Enable 405GP to be a master on the PCI bus (PMM).
+ * Enable 405GP to act as a PCI memory target (PTM).
+ *--------------------------------------------------------------------------*/
+ pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ }
+#endif
+
+#if defined(CONFIG_405EP)
+ /*
+ * on ppc405ep vendor/device id is not set
+ * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+ * are the correct values.
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
+#endif
+
+ /*
+ * Set HCE bit (Host Configuration Enabled)
+ */
+ pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
+
+#ifdef CONFIG_PCI_PNP
+ /*--------------------------------------------------------------------------+
+ * Scan the PCI bus and configure devices found.
+ *--------------------------------------------------------------------------*/
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ if (is_pci_host(hose) ||
+ (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+ {
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ hose->last_busno = pci_hose_scan(hose);
+ }
+#endif /* CONFIG_PCI_PNP */
+
+}
+
+/*
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
+ * be set as an Adapter.
+ *
+ * I (Andrew May) don't know what we should do here, but I don't want
+ * the auto setup of a PCI device disabling what is done pci_405gp_init
+ * as has happened before.
+ */
+void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *entry)
+{
+#ifdef DEBUG
+ printf("405gp_setup_bridge\n");
+#endif
+}
+
+/*
+ *
+ */
+
+void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char int_line = 0xff;
+
+ /*
+ * Write pci interrupt line register (cpci405 specific)
+ */
+ switch (PCI_DEV(dev) & 0x03)
+ {
+ case 0:
+ int_line = 27 + 2;
+ break;
+ case 1:
+ int_line = 27 + 3;
+ break;
+ case 2:
+ int_line = 27 + 0;
+ break;
+ case 3:
+ int_line = 27 + 1;
+ break;
+ }
+
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *entry)
+{
+ unsigned int cmdstat = 0;
+
+ pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+
+ /* always enable io space on vga boards */
+ pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+ cmdstat |= PCI_COMMAND_IO;
+ pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+}
+
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
+
+/*
+ *As is these functs get called out of flash Not a horrible
+ *thing, but something to keep in mind. (no statics?)
+ */
+static struct pci_config_table pci_405gp_config_table[] = {
+/*if VendID is 0 it terminates the table search (ie Walnut)*/
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+ {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
+#endif
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+ { }
+};
+
+static struct pci_controller hose = {
+ fixup_irq: pci_405gp_fixup_irq,
+ config_table: pci_405gp_config_table,
+};
+
+void pci_init_board(void)
+{
+ /*we want the ptrs to RAM not flash (ie don't use init list)*/
+ hose.fixup_irq = pci_405gp_fixup_irq;
+ hose.config_table = pci_405gp_config_table;
+ pci_405gp_init(&hose);
+}
+
+#endif
+
+#endif /* CONFIG_405GP */
+
+/*-----------------------------------------------------------------------------+
+ * CONFIG_440
+ *-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440)
+
+static struct pci_controller ppc440_hose = {0};
+
+/*
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ * Weak default implementation: "Normal" boards implement the PCI
+ * host functionality. This can be overridden for PCI adapter boards.
+ */
+int __is_pci_host(struct pci_controller *hose)
+{
+ return 1;
+}
+int is_pci_host(struct pci_controller *hose)
+ __attribute__((weak, alias("__is_pci_host")));
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX)
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+void __pci_target_init(struct pci_controller *hose)
+{
+ /*
+ * Set up Direct MMIO registers
+ */
+
+ /*
+ * PowerPC440 EP PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ /* PMM0 Mask/Attribute - disabled b4 setting */
+ out_le32((void *)PCIL0_PMM0MA, 0x00000000);
+ /* PMM0 Local Address */
+ out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
+ /* PMM0 PCI Low Address */
+ out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
+ /* PMM0 PCI High Address */
+ out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
+ /* 512M + No prefetching, and enable region */
+ out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
+
+ /* PMM1 Mask/Attribute - disabled b4 setting */
+ out_le32((void *)PCIL0_PMM1MA, 0x00000000);
+ /* PMM1 Local Address */
+ out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
+ /* PMM1 PCI Low Address */
+ out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
+ /* PMM1 PCI High Address */
+ out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
+ /* 512M + No prefetching, and enable region */
+ out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
+
+ out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */
+ out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */
+ out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*
+ * Set up Configuration registers
+ */
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+/*
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+ u32 reg;
+
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
+ mfsdr(SD0_AMP1, reg);
+ mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB3_ACR);
+ mtdcr(PLB3_ACR, reg | 0x80000000);
+
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
+ mfsdr(SD0_AMP0, reg);
+ mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB4_ACR) | 0xa0000000;
+ mtdcr(PLB4_ACR, reg);
+
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
+ /* Segment0 */
+ reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+ reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+ mtdcr(PLB0_ACR, reg);
+
+ /* Segment1 */
+ reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+ reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+ mtdcr(PLB1_ACR, reg);
+
+#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
+ hose->fixup_irq = board_pci_fixup_irq;
+#endif
+
+ return 1;
+}
+
+#else /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void __pci_target_init(struct pci_controller * hose)
+{
+ /*
+ * Disable everything
+ */
+ out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
+ out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
+ out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
+ out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
+
+ /*
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options do not support sizes such as 128/256 MB.
+ */
+ out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+ out_le32((void *)PCIL0_PIM0LAH, 0);
+ out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
+ out_le32((void *)PCIL0_BAR0, 0);
+
+ /*
+ * Program the board's subsystem id/vendor id
+ */
+ out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+ out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int __pci_pre_init(struct pci_controller *hose)
+{
+ /*
+ * This board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ */
+ if (!pci_arbiter_enabled()) {
+ printf("PCI: PCI Arbiter disabled!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+#endif /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose)
+ __attribute__((weak, alias("__pci_target_init")));
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int pci_pre_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_pre_init")));
+
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+void __pci_master_init(struct pci_controller *hose)
+{
+ u16 reg;
+
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
+ pci_read_config_word(0, PCI_COMMAND, ®);
+ pci_write_config_word(0, PCI_COMMAND, reg |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+void pci_master_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_master_init")));
+#endif /* CONFIG_SYS_PCI_MASTER_INIT */
+
+int pci_440_init (struct pci_controller *hose)
+{
+ int reg_num = 0;
+
+#ifndef CONFIG_DISABLE_PISE_TEST
+ /*--------------------------------------------------------------------------+
+ * The PCI initialization sequence enable bit must be set ... if not abort
+ * pci setup since updating the bit requires chip reset.
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ unsigned long strap;
+
+ mfsdr(SDR0_SDSTP1,strap);
+ if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+#elif defined(CONFIG_440GP)
+ unsigned long strap;
+
+ strap = mfdcr(CPC0_STRP1);
+ if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
+ printf("PCI: CPC0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+#endif
+#endif /* CONFIG_DISABLE_PISE_TEST */
+
+ /*--------------------------------------------------------------------------+
+ * PCI controller init
+ *--------------------------------------------------------------------------*/
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ 0x00000000,
+ PCIL0_IOBASE,
+ 0x10000,
+ PCI_REGION_IO);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + reg_num++,
+ CONFIG_SYS_PCI_TARGBASE,
+ CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+ CONFIG_SYS_PCI_MEMSIZE,
+#else
+ 0x10000000,
+#endif
+ PCI_REGION_MEM );
+
+#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
+ defined(CONFIG_PCI_SYS_MEM_SIZE)
+ /* System memory space */
+ pci_set_region(hose->regions + reg_num++,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ CONFIG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
+#endif
+
+ hose->region_count = reg_num;
+
+ pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
+
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init(hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+
+ pci_register_hose( hose );
+
+ /*--------------------------------------------------------------------------+
+ * PCI target init
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+ pci_target_init(hose); /* Let board setup pci target */
+#else
+ out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
+ out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
+ out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
+#elif defined(PCIL0_BRDGOPT1)
+ out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
+ out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */
+#endif
+
+ /*--------------------------------------------------------------------------+
+ * PCI master init: default is one 256MB region for PCI memory:
+ * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+ pci_master_init(hose); /* Let board setup pci master */
+#else
+ out32r( PCIL0_POM0SA, 0 ); /* disable */
+ out32r( PCIL0_POM1SA, 0 ); /* disable */
+ out32r( PCIL0_POM2SA, 0 ); /* disable */
+#if defined(CONFIG_440SPE)
+ out32r( PCIL0_POM0LAL, 0x10000000 );
+ out32r( PCIL0_POM0LAH, 0x0000000c );
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ out32r( PCIL0_POM0LAL, 0x20000000 );
+ out32r( PCIL0_POM0LAH, 0x0000000c );
+#else
+ out32r( PCIL0_POM0LAL, 0x00000000 );
+ out32r( PCIL0_POM0LAH, 0x00000003 );
+#endif
+ out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
+ out32r( PCIL0_POM0PCIAH, 0x00000000 );
+ out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
+ out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
+#endif
+
+ /*--------------------------------------------------------------------------+
+ * PCI host configuration -- we don't make any assumptions here ... the
+ * _board_must_indicate_ what to do -- there's just too many runtime
+ * scenarios in environments like cPCI, PPMC, etc. to make a determination
+ * based on hard-coded values or state of arbiter enable.
+ *--------------------------------------------------------------------------*/
+ if (is_pci_host(hose)) {
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+ out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
+#endif
+ hose->last_busno = pci_hose_scan(hose);
+ }
+ return hose->last_busno;
+}
+
+void pci_init_board(void)
+{
+ int busno;
+
+ busno = pci_440_init (&ppc440_hose);
+#if (defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
+ !defined(CONFIG_PCI_DISABLE_PCIE)
+ pcie_setup_hoses(busno + 1);
+#endif
+}
+
+#endif /* CONFIG_440 */
+
+#if defined(CONFIG_405EX)
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ pcie_setup_hoses(0);
+}
+#endif /* CONFIG_405EX */
+
+#endif /* CONFIG_PCI */
--- /dev/null
+/*
+ * (C) Copyright 2006 - 2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <pci.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
+ defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
+
+#include <asm/4xx_pcie.h>
+
+enum {
+ PTYPE_ENDPOINT = 0x0,
+ PTYPE_LEGACY_ENDPOINT = 0x1,
+ PTYPE_ROOT_PORT = 0x4,
+
+ LNKW_X1 = 0x1,
+ LNKW_X4 = 0x4,
+ LNKW_X8 = 0x8
+};
+
+static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
+
+/*
+ * Per default, all cards are present, so we need to check if the
+ * link comes up.
+ */
+int __board_pcie_card_present(int port)
+{
+ return 1;
+}
+int board_pcie_card_present(int port)
+ __attribute__((weak, alias("__board_pcie_card_present")));
+
+/*
+ * Some boards have runtime detection of the first and last PCIe
+ * slot used, so let's provide weak default functions for the
+ * common version.
+ */
+int __board_pcie_first(void)
+{
+ return 0;
+}
+int board_pcie_first(void)
+ __attribute__((weak, alias("__board_pcie_first")));
+
+int __board_pcie_last(void)
+{
+ return CONFIG_SYS_PCIE_NR_PORTS - 1;
+}
+int board_pcie_last(void)
+ __attribute__((weak, alias("__board_pcie_last")));
+
+void __board_pcie_setup_port(int port, int rootpoint)
+{
+ /* noting in this weak default implementation */
+}
+void board_pcie_setup_port(int port, int rootpoint)
+ __attribute__((weak, alias("__board_pcie_setup_port")));
+
+void pcie_setup_hoses(int busno)
+{
+ struct pci_controller *hose;
+ int i, bus;
+ int ret = 0;
+ char *env;
+ unsigned int delay;
+ int first = board_pcie_first();
+ int last = board_pcie_last();
+
+ /*
+ * Assume we're called after the PCI(X) hose(s) are initialized,
+ * which takes bus ID 0... and therefore start numbering PCIe's
+ * from the next number.
+ */
+ bus = busno;
+
+ for (i = first; i <= last; i++) {
+ /*
+ * Some boards (e.g. Katmai) can detects via hardware
+ * if a PCIe card is plugged, so let's check this.
+ */
+ if (!board_pcie_card_present(i))
+ continue;
+
+ if (is_end_point(i)) {
+ board_pcie_setup_port(i, 0);
+ ret = ppc4xx_init_pcie_endport(i);
+ } else {
+ board_pcie_setup_port(i, 1);
+ ret = ppc4xx_init_pcie_rootport(i);
+ }
+ if (ret == -ENODEV)
+ continue;
+ if (ret) {
+ printf("PCIE%d: initialization as %s failed\n", i,
+ is_end_point(i) ? "endpoint" : "root-complex");
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ hose->current_busno = bus;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+ if (is_end_point(i)) {
+ ppc4xx_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+ } else {
+ ppc4xx_setup_pcie_rootpoint(hose, i);
+ env = getenv ("pciscandelay");
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
+ if (delay > 5)
+ printf("Warning, expect noticable delay before "
+ "PCIe scan due to 'pciscandelay' value!\n");
+ mdelay(delay * 1000);
+ }
+
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
+ }
+ }
+}
+
+static int validate_endpoint(struct pci_controller *hose)
+{
+ if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
+ return (is_end_point(0));
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
+ return (is_end_point(1));
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
+ return (is_end_point(2));
+#endif
+
+ return 0;
+}
+
+static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
+{
+ u8 *base = (u8*)hose->cfg_data;
+
+ /* use local configuration space for the first bus */
+ if (PCI_BUS(devfn) == 0) {
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
+#endif
+ }
+
+ return base;
+}
+
+static void pcie_dmer_disable(void)
+{
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
+#endif
+}
+
+static void pcie_dmer_enable(void)
+{
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
+#endif
+}
+
+static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
+ int offset, int len, u32 *val) {
+
+ u8 *address;
+ *val = 0;
+
+ if (validate_endpoint(hose))
+ return 0; /* No upstream config access */
+
+ /*
+ * Bus numbers are relative to hose->first_busno
+ */
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+ /*
+ * NOTICE: configuration space ranges are currenlty mapped only for
+ * the first 16 buses, so such limit must be imposed. In case more
+ * buses are required the TLB settings in board/amcc/<board>/init.S
+ * need to be altered accordingly (one bus takes 1 MB of memory space).
+ */
+ if (PCI_BUS(devfn) >= 16)
+ return 0;
+
+ /*
+ * Only single device/single function is supported for the primary and
+ * secondary buses of the 440SPe host bridge.
+ */
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
+ offset += devfn << 4;
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ pcie_dmer_disable ();
+
+ debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
+ switch (len) {
+ case 1:
+ *val = in_8(hose->cfg_data + offset);
+ break;
+ case 2:
+ *val = in_le16((u16 *)(hose->cfg_data + offset));
+ break;
+ default:
+ *val = in_le32((u32*)(hose->cfg_data + offset));
+ break;
+ }
+
+ pcie_dmer_enable ();
+
+ return 0;
+}
+
+static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
+ int offset, int len, u32 val) {
+
+ u8 *address;
+
+ if (validate_endpoint(hose))
+ return 0; /* No upstream config access */
+
+ /*
+ * Bus numbers are relative to hose->first_busno
+ */
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+ /*
+ * Same constraints as in pcie_read_config().
+ */
+ if (PCI_BUS(devfn) >= 16)
+ return 0;
+
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
+ offset += devfn << 4;
+
+ /*
+ * Suppress MCK exceptions, similar to pcie_read_config()
+ */
+ pcie_dmer_disable ();
+
+ switch (len) {
+ case 1:
+ out_8(hose->cfg_data + offset, val);
+ break;
+ case 2:
+ out_le16((u16 *)(hose->cfg_data + offset), val);
+ break;
+ default:
+ out_le32((u32 *)(hose->cfg_data + offset), val);
+ break;
+ }
+
+ pcie_dmer_enable ();
+
+ return 0;
+}
+
+int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 1, &v);
+ *val = (u8)v;
+ return rv;
+}
+
+int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 2, &v);
+ *val = (u16)v;
+ return rv;
+}
+
+int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 3, &v);
+ *val = (u32)v;
+ return rv;
+}
+
+int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,1,val);
+}
+
+int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
+}
+
+int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
+}
+
+#if defined(CONFIG_440SPE)
+static void ppc4xx_setup_utl(u32 port) {
+
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+ break;
+
+ case 2:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+ break;
+ }
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+}
+
+static int check_error(void)
+{
+ u32 valPE0, valPE1, valPE2;
+ int err = 0;
+
+ /* SDR0_PEGPLLLCT1 reset */
+ if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
+ printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
+
+ valPE0 = SDR_READ(PESDR0_RCSSET);
+ valPE1 = SDR_READ(PESDR1_RCSSET);
+ valPE2 = SDR_READ(PESDR2_RCSSET);
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & 0x01000000) ||
+ !(valPE1 & 0x01000000) ||
+ !(valPE2 & 0x01000000)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & 0x00010000) ||
+ !(valPE1 & 0x00010000) ||
+ !(valPE2 & 0x00010000)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & 0x00001000) ||
+ (valPE1 & 0x00001000) ||
+ (valPE2 & 0x00001000)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & 0x10000000) ||
+ (valPE1 & 0x10000000) ||
+ (valPE2 & 0x10000000)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & 0x00100000) ||
+ (valPE1 & 0x00100000) ||
+ (valPE2 & 0x00100000)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET shutdown */
+ if ((valPE0 & 0x00000100) ||
+ (valPE1 & 0x00000100) ||
+ (valPE2 & 0x00000100)) {
+ printf("PCIE: SDR0_PExRCSSET shutdown error\n");
+ err = -1;
+ }
+ return err;
+}
+
+/*
+ * Initialize PCI Express core
+ */
+int ppc4xx_init_pcie(void)
+{
+ int time_out = 20;
+
+ /* Set PLL clock receiver to LVPECL */
+ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+ if (check_error()) {
+ printf("ERROR: failed to set PCIe reference clock receiver --"
+ "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
+
+ return -1;
+ }
+
+ /* Did resistance calibration work? */
+ if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
+ printf("ERROR: PCIe resistance calibration failed --"
+ "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
+
+ return -1;
+ }
+ /* De-assert reset of PCIe PLL, wait for lock */
+ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+ udelay(300); /* 300 uS is maximum time lock should take */
+
+ while (time_out) {
+ if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
+ time_out--;
+ udelay(20); /* Wait 20 uS more if needed */
+ } else
+ break;
+ }
+ if (!time_out) {
+ printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
+ "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
+
+ return -1;
+ }
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+static void ppc4xx_setup_utl(u32 port)
+{
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
+ + 0x1000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+ break;
+ }
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
+}
+
+/*
+ * TODO: double check PCI express SDR based on the latest user manual
+ * Some registers specified here no longer exist.. has to be
+ * updated based on the final EAS spec.
+ */
+static int check_error(void)
+{
+ u32 valPE0, valPE1;
+ int err = 0;
+
+ valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
+ valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual
+ * TODO: double check PE SDR PLL Register with the updated user manual.
+ */
+int ppc4xx_init_pcie(void)
+{
+ if (check_error())
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX)
+static void ppc4xx_setup_utl(u32 port)
+{
+ u32 utl_base;
+
+ /*
+ * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+
+ break;
+ }
+ utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
+ out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
+ out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
+ out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
+ out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
+
+ out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
+ out_be32((u32 *)(utl_base + PEUTL_RCSTA),
+ in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
+}
+
+int ppc4xx_init_pcie(void)
+{
+ /*
+ * Nothing to do on 405EX
+ */
+ return 0;
+}
+#endif /* CONFIG_405EX */
+
+/*
+ * Board-specific pcie initialization
+ * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
+ */
+
+/*
+ * Initialize various parts of the PCI Express core for our port:
+ *
+ * - Set as a root port and enable max width
+ * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+ * - Set up UTL configuration.
+ * - Increase SERDES drive strength to levels suggested by AMCC.
+ * - De-assert RSTPYN, RSTDL and RSTGU.
+ *
+ * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
+ * with default setting 0x11310000. The register has new fields,
+ * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+ * hang.
+ */
+#if defined(CONFIG_440SPE)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val = 1 << 24;
+ u32 utlset1;
+
+ if (rootport) {
+ val = PTYPE_ROOT_PORT << 20;
+ utlset1 = 0x21222222;
+ } else {
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ utlset1 = 0x20222222;
+ }
+
+ if (port == 0)
+ val |= LNKW_X8 << 12;
+ else
+ val |= LNKW_X4 << 12;
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ if (!ppc440spe_revB())
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
+ SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
+ if (port == 0) {
+ SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+ }
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (rootport)
+ val = PTYPE_ROOT_PORT << 20;
+ else
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+
+ if (port == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
+
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR0_L0DRV, 0x00000130);
+ SDR_WRITE(PESDR0_L0CLK, 0x00000006);
+
+ SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L0DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L1DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L2DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L3DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L0CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L1CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L2CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L3CLK, 0x00000006);
+
+ SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_405EX)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val;
+
+ if (rootport)
+ val = 0x00401000;
+ else
+ val = 0x00101000;
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
+ SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
+ SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
+
+ /* Assert the PE0_PHY reset */
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
+ udelay(1000);
+
+ /* deassert the PE0_hotreset */
+ if (is_end_point(port))
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
+ else
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
+
+ /* poll for phy !reset */
+ while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
+ ;
+
+ /* deassert the PE0_gpl_utl_reset */
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
+
+ if (port == 0)
+ mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
+ else
+ mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
+
+ return 0;
+}
+#endif /* CONFIG_405EX */
+
+int ppc4xx_init_pcie_port_hw(int port, int rootport)
+__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
+
+/*
+ * We map PCI Express configuration access into the 512MB regions
+ *
+ * NOTICE: revB is very strict about PLB real addressess and ranges to
+ * be mapped for config space; it seems to only work with d_nnnn_nnnn
+ * range (hangs the core upon config transaction attempts when set
+ * otherwise) while revA uses c_nnnn_nnnn.
+ *
+ * For 440SPe revA:
+ * PCIE0: 0xc_4000_0000
+ * PCIE1: 0xc_8000_0000
+ * PCIE2: 0xc_c000_0000
+ *
+ * For 440SPe revB:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ * PCIE2: 0xd_4000_0000
+ *
+ * For 405EX:
+ * PCIE0: 0xa000_0000
+ * PCIE1: 0xc000_0000
+ *
+ * For 460EX/GT:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ */
+static inline u64 ppc4xx_get_cfgaddr(int port)
+{
+#if defined(CONFIG_405EX)
+ if (port == 0)
+ return (u64)CONFIG_SYS_PCIE0_CFGBASE;
+ else
+ return (u64)CONFIG_SYS_PCIE1_CFGBASE;
+#endif
+#if defined(CONFIG_440SPE)
+ if (ppc440spe_revB()) {
+ switch (port) {
+ default: /* to satisfy compiler */
+ case 0:
+ return 0x0000000d00000000ULL;
+ case 1:
+ return 0x0000000d20000000ULL;
+ case 2:
+ return 0x0000000d40000000ULL;
+ }
+ } else {
+ switch (port) {
+ default: /* to satisfy compiler */
+ case 0:
+ return 0x0000000c40000000ULL;
+ case 1:
+ return 0x0000000c80000000ULL;
+ case 2:
+ return 0x0000000cc0000000ULL;
+ }
+ }
+#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ if (port == 0)
+ return 0x0000000d00000000ULL;
+ else
+ return 0x0000000d20000000ULL;
+#endif
+}
+
+/*
+ * 4xx boards as endpoint and root point setup
+ * and
+ * testing inbound and out bound windows
+ *
+ * 4xx boards can be plugged into another 4xx boards or you can get PCI-E
+ * cable which can be used to setup loop back from one port to another port.
+ * Please rememeber that unless there is a endpoint plugged in to root port it
+ * will not initialize. It is the same in case of endpoint , unless there is
+ * root port attached it will not initialize.
+ *
+ * In this release of software all the PCI-E ports are configured as either
+ * endpoint or rootpoint.In future we will have support for selective ports
+ * setup as endpoint and root point in single board.
+ *
+ * Once your board came up as root point , you can verify by reading
+ * /proc/bus/pci/devices. Where you can see the configuration registers
+ * of endpoint device attached to the port.
+ *
+ * Enpoint cofiguration can be verified by connecting 4xx board to any
+ * host or another 4xx board. Then try to scan the device. In case of
+ * linux use "lspci" or appripriate os command.
+ *
+ * How do I verify the inbound and out bound windows ? (4xx to 4xx)
+ * in this configuration inbound and outbound windows are setup to access
+ * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ * This is waere your POM(PLB out bound memory window) mapped. then
+ * read the data from other 4xx board's u-boot prompt at address
+ * 0x9000 0000(SRAM). Data should match.
+ * In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ * data at 0x9000 0000(SRAM).Data should match.
+ */
+int ppc4xx_init_pcie_port(int port, int rootport)
+{
+ static int core_init;
+ volatile u32 val = 0;
+ int attempts;
+ u64 addr;
+ u32 low, high;
+
+ if (!core_init) {
+ if (ppc4xx_init_pcie())
+ return -1;
+ ++core_init;
+ }
+
+ /*
+ * Initialize various parts of the PCI Express core for our port
+ */
+ ppc4xx_init_pcie_port_hw(port, rootport);
+
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ */
+ mdelay(100);
+
+ val = SDR_READ(SDRN_PESDR_RCSSTS(port));
+ if (val & (1 << 20)) {
+ printf("PCIE%d: PGRST failed %08x\n", port, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = SDR_READ(SDRN_PESDR_LOOP(port));
+ if (!(val & 0x00001000)) {
+ printf("PCIE%d: link is not up.\n", port);
+ return -ENODEV;
+ }
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ */
+ if (!ppc440spe_revB())
+ ppc4xx_setup_utl(port);
+
+ /*
+ * We map PCI Express configuration access into the 512MB regions
+ */
+ addr = ppc4xx_get_cfgaddr(port);
+ low = U64_TO_U32_LOW(addr);
+ high = U64_TO_U32_HIGH(addr);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+ break;
+#endif
+ }
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE%d: VC0 not active\n", port);
+ return -1;
+ }
+ mdelay(1000);
+ }
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
+ mdelay(100);
+
+ return 0;
+}
+
+int ppc4xx_init_pcie_rootport(int port)
+{
+ return ppc4xx_init_pcie_port(port, 1);
+}
+
+int ppc4xx_init_pcie_endport(int port)
+{
+ return ppc4xx_init_pcie_port(port, 0);
+}
+
+void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ volatile void *rmbase = NULL;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
+ break;
+#endif
+ }
+
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
+ in_le32(mbase + PECFG_POM0LAL));
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
+ break;
+#endif
+ }
+
+ /* Set up 4GB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
+ out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAL, 0);
+ out_le32(mbase + PECFG_PIM0LAH, 0);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Set Device and Vendor Id */
+ out_le16(mbase + 0x200, 0xaaa0 + port);
+ out_le16(mbase + 0x202, 0xbed0 + port);
+
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printf("PCIE%d: successfully set as root-complex\n", port);
+}
+
+int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ int attempts = 0;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
+ break;
+#if defined(CONFIG_SYS_PCIE2_CFGBASE)
+ case 2:
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
+ break;
+#endif
+ }
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+ out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+#endif
+ }
+
+ /* Set up 64MB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
+ out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
+
+ /* Setup BAR0 */
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
+ out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+ /* Disable BAR1 & BAR2 */
+ out_le32(mbase + PECFG_BAR1MPA, 0);
+ out_le32(mbase + PECFG_BAR2HMPA, 0);
+ out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
+ out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
+
+ /* Set Class Code to Processor/PPC */
+ out_le32(mbase + 0x208, 0x0b200001);
+
+ attempts = 10;
+ while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE%d: BME not active\n", port);
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ printf("PCIE%d: successfully set as endpoint\n", port);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE && CONFIG_PCI */
--- /dev/null
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This source code is dual-licensed. You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <watchdog.h>
+#include <ppc4xx.h>
+
+#ifdef CONFIG_SERIAL_MULTI
+#include <serial.h>
+#endif
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+#include <malloc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_440)
+
+#if defined(CONFIG_440)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
+#else
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
+#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
+#endif
+
+#if defined(CONFIG_440GP)
+#define CR0_MASK 0x3fff0000
+#define CR0_EXTCLK_ENA 0x00600000
+#define CR0_UDIV_POS 16
+#define UDIV_SUBTRACT 1
+#define UART0_SDR CPC0_CR0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR SDR0_UART0
+#define UART1_SDR SDR0_UART1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART2_SDR SDR0_UART2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART3_SDR SDR0_UART3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define UCR0_MASK 0x0000007f
+#define UCR1_MASK 0x00007f00
+#define UCR0_UDIV_POS 0
+#define UCR1_UDIV_POS 8
+#define UDIV_MAX 127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE 0xef600200
+#define UART1_BASE 0xef600300
+#define CR0_MASK 0x000000ff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR SDR0_UART0
+#define UART1_SDR SDR0_UART1
+#else /* CONFIG_405GP || CONFIG_405CR */
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define CR0_MASK 0x00001fff
+#define CR0_EXTCLK_ENA 0x000000c0
+#define CR0_UDIV_POS 1
+#define UDIV_MAX 32
+#endif
+
+/* using serial port 0 or 1 as U-Boot console ? */
+#if defined(CONFIG_UART1_CONSOLE)
+#define ACTING_UART0_BASE UART1_BASE
+#define ACTING_UART1_BASE UART0_BASE
+#else
+#define ACTING_UART0_BASE UART0_BASE
+#define ACTING_UART1_BASE UART1_BASE
+#endif
+
+#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+#error "External serial clock not supported on AMCC PPC405EP!"
+#endif
+
+#define UART_RBR 0x00
+#define UART_THR 0x00
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/*-----------------------------------------------------------------------------+
+ | Line Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncLSRDataReady1 0x01
+#define asyncLSROverrunError1 0x02
+#define asyncLSRParityError1 0x04
+#define asyncLSRFramingError1 0x08
+#define asyncLSRBreakInterrupt1 0x10
+#define asyncLSRTxHoldEmpty1 0x20
+#define asyncLSRTxShiftEmpty1 0x40
+#define asyncLSRRxFifoError1 0x80
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+/*-----------------------------------------------------------------------------+
+ | Fifo
+ +-----------------------------------------------------------------------------*/
+typedef struct {
+ char *rx_buffer;
+ ulong rx_put;
+ ulong rx_get;
+} serial_buffer_t;
+
+volatile static serial_buffer_t buf_info;
+#endif
+
+static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
+{
+ PPC4xx_SYS_INFO sys_info;
+ u8 val;
+
+ get_sys_info(&sys_info);
+
+ /* Correct UART frequency in bd-info struct now that
+ * the UART divisor is available
+ */
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+#else
+ gd->uart_clk = sys_info.freqUART / udiv;
+#endif
+
+ out_8((u8 *)base + UART_LCR, 0x80); /* set DLAB bit */
+ out_8((u8 *)base + UART_DLL, bdiv); /* set baudrate divisor */
+ out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out_8((u8 *)base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out_8((u8 *)base + UART_FCR, 0x00); /* disable FIFO */
+ out_8((u8 *)base + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in_8((u8 *)base + UART_LSR); /* clear line status */
+ val = in_8((u8 *)base + UART_RBR); /* read receive buffer */
+ out_8((u8 *)base + UART_SCR, 0x00); /* set scratchpad */
+ out_8((u8 *)base + UART_IER, 0x00); /* set interrupt enable reg */
+}
+
+#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
+ !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+static void serial_divs (int baudrate, unsigned long *pudiv,
+ unsigned short *pbdiv)
+{
+ sys_info_t sysinfo;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long i;
+ unsigned long est; /* current estimate */
+
+ get_sys_info(&sysinfo);
+
+ udiv = 32; /* Assume lowest possible serial clk */
+ div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+ umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
+ diff = 32; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (32) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 32; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+
+ *pudiv = udiv;
+ *pbdiv = div / udiv;
+}
+
+#elif defined(CONFIG_405EZ)
+
+static void serial_divs (int baudrate, unsigned long *pudiv,
+ unsigned short *pbdiv)
+{
+ sys_info_t sysinfo;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long i;
+ unsigned long est; /* current estimate */
+ unsigned long plloutb;
+ unsigned long cpr_pllc;
+ u32 reg;
+
+ /* check the pll feedback source */
+ mfcpr(CPR0_PLLC, cpr_pllc);
+
+ get_sys_info(&sysinfo);
+
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
+ sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
+ udiv = 256; /* Assume lowest possible serial clk */
+ div = plloutb / (16 * baudrate); /* total divisor */
+ umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
+ diff = 256; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (256) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 256; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+
+ *pudiv = udiv;
+ mfcpr(CPC0_PERD0, reg);
+ reg &= ~0x0000ffff;
+ reg |= ((udiv - 0) << 8) | (udiv - 0);
+ mtcpr(CPC0_PERD0, reg);
+ *pbdiv = div / udiv;
+}
+#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+#if defined(CONFIG_440)
+int serial_init_dev(unsigned long base)
+{
+ unsigned long reg;
+ unsigned long udiv;
+ unsigned short bdiv;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ unsigned long tmp;
+#endif
+
+ MFREG(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ /* For 440, the cpu clock is on divider chain A, UART on divider
+ * chain B ... so cpu clock is irrelevant. Get the "optimized"
+ * values that are subject to the 1/2 opb clock constraint
+ */
+ serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
+#endif
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
+#endif
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
+#endif
+
+ serial_init_common(base, udiv, bdiv);
+
+ return (0);
+}
+
+#else /* !defined(CONFIG_440) */
+
+int serial_init_dev (unsigned long base)
+{
+ unsigned long reg;
+ unsigned long tmp;
+ unsigned long clk;
+ unsigned long udiv;
+ unsigned short bdiv;
+
+#ifdef CONFIG_405EX
+ clk = tmp = 0;
+ mfsdr(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+#endif
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ mtsdr(UART0_SDR, reg);
+
+#if defined(UART1_SDR)
+ mtsdr(UART1_SDR, reg);
+#endif
+
+#elif defined(CONFIG_405EZ)
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+ clk = tmp = reg = 0;
+#else
+#ifdef CONFIG_405EP
+ reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
+ clk = gd->cpu_clk;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+ reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
+ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
+ mtdcr (CPC0_UCR, reg);
+#else /* CONFIG_405EP */
+ reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+ udiv = 1;
+ reg |= CR0_EXTCLK_ENA;
+#else
+ clk = gd->cpu_clk;
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
+ udiv = 31; /* Errata 59: stuck at 31 */
+#else
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+#endif
+#endif
+ reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
+ mtdcr (CPC0_CR0, reg);
+#endif /* CONFIG_405EP */
+ tmp = gd->baudrate * udiv * 16;
+ bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EX */
+
+ serial_init_common(base, udiv, bdiv);
+
+ return (0);
+}
+
+#endif /* if defined(CONFIG_440) */
+
+void serial_setbrg_dev(unsigned long base)
+{
+ serial_init_dev(base);
+}
+
+void serial_putc_dev(unsigned long base, const char c)
+{
+ int i;
+
+ if (c == '\n')
+ serial_putc_dev(base, '\r');
+
+ /* check THRE bit, wait for transmiter available */
+ for (i = 1; i < 3500; i++) {
+ if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
+ break;
+ udelay (100);
+ }
+
+ out_8((u8 *)base + UART_THR, c); /* put character out */
+}
+
+void serial_puts_dev (unsigned long base, const char *s)
+{
+ while (*s)
+ serial_putc_dev (base, *s++);
+}
+
+int serial_getc_dev (unsigned long base)
+{
+ unsigned char status = 0;
+
+ while (1) {
+#if defined(CONFIG_HW_WATCHDOG)
+ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
+#endif /* CONFIG_HW_WATCHDOG */
+
+ status = in_8((u8 *)base + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ break;
+
+ if ((status & ( asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)base + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+ }
+
+ return (0x000000ff & (int) in_8((u8 *)base));
+}
+
+int serial_tstc_dev (unsigned long base)
+{
+ unsigned char status;
+
+ status = in_8((u8 *)base + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ return (1);
+
+ if ((status & ( asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)base + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+
+void serial_isr (void *arg)
+{
+ int space;
+ int c;
+ const int rx_get = buf_info.rx_get;
+ int rx_put = buf_info.rx_put;
+
+ if (rx_get <= rx_put)
+ space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+ else
+ space = rx_get - rx_put;
+
+ while (serial_tstc_dev (ACTING_UART0_BASE)) {
+ c = serial_getc_dev (ACTING_UART0_BASE);
+ if (space) {
+ buf_info.rx_buffer[rx_put++] = c;
+ space--;
+ }
+ if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
+ rx_put = 0;
+ if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
+ /* Stop flow by setting RTS inactive */
+ out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
+ (0xFF ^ 0x02));
+ }
+ }
+ buf_info.rx_put = rx_put;
+}
+
+void serial_buffered_init (void)
+{
+ serial_puts ("Switching to interrupt driven serial input mode.\n");
+ buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
+ buf_info.rx_put = 0;
+ buf_info.rx_get = 0;
+
+ if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
+ serial_puts ("Check CTS signal present on serial port: OK.\n");
+ else
+ serial_puts ("WARNING: CTS signal not present on serial port.\n");
+
+ irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
+ serial_isr /*interrupt_handler_t *handler */ ,
+ (void *) &buf_info /*void *arg */ );
+
+ /* Enable "RX Data Available" Interrupt on UART */
+ out_8(ACTING_UART0_BASE + UART_IER, 0x01);
+ /* Set DTR active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
+ /* Start flow by setting RTS active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
+ /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
+ out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
+}
+
+void serial_buffered_putc (const char c)
+{
+ /* Wait for CTS */
+#if defined(CONFIG_HW_WATCHDOG)
+ while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
+ WATCHDOG_RESET ();
+#else
+ while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
+#endif
+ serial_putc (c);
+}
+
+void serial_buffered_puts (const char *s)
+{
+ serial_puts (s);
+}
+
+int serial_buffered_getc (void)
+{
+ int space;
+ int c;
+ int rx_get = buf_info.rx_get;
+ int rx_put;
+
+#if defined(CONFIG_HW_WATCHDOG)
+ while (rx_get == buf_info.rx_put)
+ WATCHDOG_RESET ();
+#else
+ while (rx_get == buf_info.rx_put);
+#endif
+ c = buf_info.rx_buffer[rx_get++];
+ if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
+ rx_get = 0;
+ buf_info.rx_get = rx_get;
+
+ rx_put = buf_info.rx_put;
+ if (rx_get <= rx_put)
+ space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+ else
+ space = rx_get - rx_put;
+
+ if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
+ /* Start flow by setting RTS active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
+ }
+
+ return c;
+}
+
+int serial_buffered_tstc (void)
+{
+ return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
+}
+
+#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
+
+#if defined(CONFIG_CMD_KGDB)
+/*
+ AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
+ number 0 or number 1
+ - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
+ configuration has been already done
+ - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
+ configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
+*/
+#if (CONFIG_KGDB_SER_INDEX & 2)
+void kgdb_serial_init (void)
+{
+ u8 val;
+ u16 br_reg;
+
+ get_clocks ();
+ br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
+ 5) / 10;
+ /*
+ * Init onboard 16550 UART
+ */
+ out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
+ out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
+ out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
+ out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR); /* clear line status */
+ val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
+ out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+}
+
+void putDebugChar (const char c)
+{
+ if (c == '\n')
+ serial_putc ('\r');
+
+ out_8((u8 *)ACTING_UART1_BASE + UART_THR, c); /* put character out */
+
+ /* check THRE bit, wait for transfer done */
+ while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
+}
+
+void putDebugStr (const char *s)
+{
+ while (*s)
+ serial_putc (*s++);
+}
+
+int getDebugChar (void)
+{
+ unsigned char status = 0;
+
+ while (1) {
+ status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ break;
+
+ if ((status & (asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+ }
+
+ return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+
+#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
+
+void kgdb_serial_init (void)
+{
+ serial_printf ("[on serial] ");
+}
+
+void putDebugChar (int c)
+{
+ serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+ serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+ return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
+#endif
+
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial0_init(void)
+{
+ return (serial_init_dev(UART0_BASE));
+}
+
+int serial1_init(void)
+{
+ return (serial_init_dev(UART1_BASE));
+}
+
+void serial0_setbrg (void)
+{
+ serial_setbrg_dev(UART0_BASE);
+}
+
+void serial1_setbrg (void)
+{
+ serial_setbrg_dev(UART1_BASE);
+}
+
+void serial0_putc(const char c)
+{
+ serial_putc_dev(UART0_BASE,c);
+}
+
+void serial1_putc(const char c)
+{
+ serial_putc_dev(UART1_BASE, c);
+}
+
+void serial0_puts(const char *s)
+{
+ serial_puts_dev(UART0_BASE, s);
+}
+
+void serial1_puts(const char *s)
+{
+ serial_puts_dev(UART1_BASE, s);
+}
+
+int serial0_getc(void)
+{
+ return(serial_getc_dev(UART0_BASE));
+}
+
+int serial1_getc(void)
+{
+ return(serial_getc_dev(UART1_BASE));
+}
+
+int serial0_tstc(void)
+{
+ return (serial_tstc_dev(UART0_BASE));
+}
+
+int serial1_tstc(void)
+{
+ return (serial_tstc_dev(UART1_BASE));
+}
+
+struct serial_device serial0_device =
+{
+ "serial0",
+ "UART0",
+ serial0_init,
+ serial0_setbrg,
+ serial0_getc,
+ serial0_tstc,
+ serial0_putc,
+ serial0_puts,
+};
+
+struct serial_device serial1_device =
+{
+ "serial1",
+ "UART1",
+ serial1_init,
+ serial1_setbrg,
+ serial1_getc,
+ serial1_tstc,
+ serial1_putc,
+ serial1_puts,
+};
+#else
+/*
+ * Wrapper functions
+ */
+int serial_init(void)
+{
+ return serial_init_dev(ACTING_UART0_BASE);
+}
+
+void serial_setbrg(void)
+{
+ serial_setbrg_dev(ACTING_UART0_BASE);
+}
+
+void serial_putc(const char c)
+{
+ serial_putc_dev(ACTING_UART0_BASE, c);
+}
+
+void serial_puts(const char *s)
+{
+ serial_puts_dev(ACTING_UART0_BASE, s);
+}
+
+int serial_getc(void)
+{
+ return serial_getc_dev(ACTING_UART0_BASE);
+}
+
+int serial_tstc(void)
+{
+ return serial_tstc_dev(ACTING_UART0_BASE);
+}
+#endif /* CONFIG_SERIAL_MULTI */
+
+#endif /* CONFIG_405GP || CONFIG_405CR */
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START := resetvec.o
+START += start.o
+
+SOBJS := cache.o
+SOBJS += dcr.o
+SOBJS += kgdb.o
+
+COBJS := 40x_spd_sdram.o
+
+COBJS += 44x_spd_ddr.o
+COBJS += 44x_spd_ddr2.o
+ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+COBJS += 4xx_ibm_ddr2_autocalib.o
+endif
+COBJS += 4xx_pci.o
+COBJS += 4xx_pcie.o
+COBJS += bedbug_405.o
+ifdef CONFIG_CMD_CHIP_CONFIG
+COBJS += cmd_chip_config.o
+endif
+COBJS += commproc.o
+COBJS += cpu.o
+COBJS += cpu_init.o
+COBJS += denali_data_eye.o
+COBJS += denali_spd_ddr2.o
+COBJS += ecc.o
+COBJS += fdt.o
+COBJS += interrupts.o
+COBJS += iop480_uart.o
+ifdef CONFIG_CMD_REGINFO
+COBJS += reginfo.o
+endif
+COBJS += sdram.o
+COBJS += speed.o
+COBJS += tlb.o
+COBJS += traps.o
+COBJS += usb.o
+COBJS += usb_ohci.o
+COBJS += usbdev.o
+ifndef CONFIG_XILINX_440
+COBJS += 4xx_uart.o
+COBJS += gpio.o
+COBJS += miiphy.o
+COBJS += uic.o
+else
+COBJS += xilinx_irq.o
+endif
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Bedbug Functions specific to the PPC405 chip
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <bedbug/type.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/regs.h>
+#include <bedbug/ppc.h>
+
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
+
+#define MAX_BREAK_POINTS 4
+
+extern CPU_DEBUG_CTX bug_ctx;
+
+void bedbug405_init __P ((void));
+void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
+void bedbug405_break_isr __P ((struct pt_regs *));
+int bedbug405_find_empty __P ((void));
+int bedbug405_set __P ((int, unsigned long));
+int bedbug405_clear __P ((int));
+\f
+
+/* ======================================================================
+ * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
+ * of the breakpoints.
+ * ====================================================================== */
+
+void bedbug405_init (void)
+{
+ int i;
+
+ /* -------------------------------------------------- */
+
+ bug_ctx.hw_debug_enabled = 0;
+ bug_ctx.stopped = 0;
+ bug_ctx.current_bp = 0;
+ bug_ctx.regs = NULL;
+
+ bug_ctx.do_break = bedbug405_do_break;
+ bug_ctx.break_isr = bedbug405_break_isr;
+ bug_ctx.find_empty = bedbug405_find_empty;
+ bug_ctx.set = bedbug405_set;
+ bug_ctx.clear = bedbug405_clear;
+
+ for (i = 1; i <= MAX_BREAK_POINTS; ++i)
+ (*bug_ctx.clear) (i);
+
+ puts ("BEDBUG:ready\n");
+ return;
+} /* bedbug_init_breakpoints */
+\f
+
+
+/* ======================================================================
+ * Set/clear/show one of the hardware breakpoints for the 405. The "off"
+ * string will disable a specific breakpoint. The "show" string will
+ * display the current breakpoints. Otherwise an address will set a
+ * breakpoint at that address. Setting a breakpoint uses the CPU-specific
+ * set routine which will assign a breakpoint number.
+ * ====================================================================== */
+
+void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ long addr = 0; /* Address to break at */
+ int which_bp; /* Breakpoint number */
+
+ /* -------------------------------------------------- */
+
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ /* Turn off a breakpoint */
+
+ if (strcmp (argv[1], "off") == 0) {
+ if (bug_ctx.hw_debug_enabled == 0) {
+ printf ("No breakpoints enabled\n");
+ return;
+ }
+
+ which_bp = simple_strtoul (argv[2], NULL, 10);
+
+ if (bug_ctx.clear)
+ (*bug_ctx.clear) (which_bp);
+
+ printf ("Breakpoint %d removed\n", which_bp);
+ return;
+ }
+
+ /* Show a list of breakpoints */
+
+ if (strcmp (argv[1], "show") == 0) {
+ for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {
+
+ switch (which_bp) {
+ case 1:
+ addr = GET_IAC1 ();
+ break;
+ case 2:
+ addr = GET_IAC2 ();
+ break;
+ case 3:
+ addr = GET_IAC3 ();
+ break;
+ case 4:
+ addr = GET_IAC4 ();
+ break;
+ }
+
+ printf ("Breakpoint [%d]: ", which_bp);
+ if (addr == 0)
+ printf ("NOT SET\n");
+ else
+ disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
+ F_RADHEX);
+ }
+ return;
+ }
+
+ /* Set a breakpoint at the address */
+
+ if (!isdigit (argv[1][0])) {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;
+
+ if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
+ printf ("Breakpoint [%d]: ", which_bp);
+ disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
+ }
+
+ return;
+} /* bedbug405_do_break */
+\f
+
+
+/* ======================================================================
+ * Handle a breakpoint. First determine which breakpoint was hit by
+ * looking at the DeBug Status Register (DBSR), clear the breakpoint
+ * and enter a mini main loop. Stay in the loop until the stopped flag
+ * in the debug context is cleared.
+ * ====================================================================== */
+
+void bedbug405_break_isr (struct pt_regs *regs)
+{
+ unsigned long dbsr_val; /* Value of the DBSR */
+ unsigned long addr = 0; /* Address stopped at */
+
+ /* -------------------------------------------------- */
+
+ dbsr_val = GET_DBSR ();
+
+ if (dbsr_val & DBSR_IA1) {
+ bug_ctx.current_bp = 1;
+ addr = GET_IAC1 ();
+ SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA2) {
+ bug_ctx.current_bp = 2;
+ addr = GET_IAC2 ();
+ SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA3) {
+ bug_ctx.current_bp = 3;
+ addr = GET_IAC3 ();
+ SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA4) {
+ bug_ctx.current_bp = 4;
+ addr = GET_IAC4 ();
+ SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
+ }
+
+ bedbug_main_loop (addr, regs);
+ return;
+} /* bedbug405_break_isr */
+\f
+
+
+/* ======================================================================
+ * Look through all of the hardware breakpoints available to see if one
+ * is unused.
+ * ====================================================================== */
+
+int bedbug405_find_empty (void)
+{
+ /* -------------------------------------------------- */
+
+ if (GET_IAC1 () == 0)
+ return 1;
+
+ if (GET_IAC2 () == 0)
+ return 2;
+
+ if (GET_IAC3 () == 0)
+ return 3;
+
+ if (GET_IAC4 () == 0)
+ return 4;
+
+ return 0;
+} /* bedbug405_find_empty */
+\f
+
+
+/* ======================================================================
+ * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
+ * number, otherwise reassign the given breakpoint. If hardware debugging
+ * is not enabled, then turn it on via the MSR and DBCR0. Set the break
+ * address in the appropriate IACx register and enable proper address
+ * beakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug405_set (int which_bp, unsigned long addr)
+{
+ /* -------------------------------------------------- */
+
+ /* Only look if which_bp == 0, else use which_bp */
+ if ((bug_ctx.find_empty) && (!which_bp) &&
+ (which_bp = (*bug_ctx.find_empty) ()) == 0) {
+ printf ("All breakpoints in use\n");
+ return 0;
+ }
+
+ if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
+ printf ("Invalid break point # %d\n", which_bp);
+ return 0;
+ }
+
+ if (!bug_ctx.hw_debug_enabled) {
+ SET_MSR (GET_MSR () | 0x200); /* set MSR[ DE ] */
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
+ bug_ctx.hw_debug_enabled = 1;
+ }
+
+ switch (which_bp) {
+ case 1:
+ SET_IAC1 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
+ break;
+
+ case 2:
+ SET_IAC2 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
+ break;
+
+ case 3:
+ SET_IAC3 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
+ break;
+
+ case 4:
+ SET_IAC4 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
+ break;
+ }
+
+ return which_bp;
+} /* bedbug405_set */
+\f
+
+
+/* ======================================================================
+ * Disable a specific breakoint by setting the appropriate IACx register
+ * to zero and claring the instruction address breakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug405_clear (int which_bp)
+{
+ /* -------------------------------------------------- */
+
+ if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
+ printf ("Invalid break point # (%d)\n", which_bp);
+ return -1;
+ }
+
+ switch (which_bp) {
+ case 1:
+ SET_IAC1 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
+ break;
+
+ case 2:
+ SET_IAC2 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
+ break;
+
+ case 3:
+ SET_IAC3 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
+ break;
+
+ case 4:
+ SET_IAC4 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
+ break;
+ }
+
+ return 0;
+} /* bedbug405_clear */
+
+
+/* ====================================================================== */
+#endif
--- /dev/null
+/*
+ * This file contains miscellaneous low-level functions.
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <config.h>
+#include <config.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/*
+ * Flush instruction cache.
+ */
+_GLOBAL(invalidate_icache)
+ iccci r0,r0
+ isync
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,L1_CACHE_BYTES
+ bdnz 2b
+ sync /* additional sync needed on g4 */
+ isync
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbf 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbi 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbi's to get to ram */
+ blr
+
+/*
+ * 40x cores have 8K or 16K dcache and 32 byte line size.
+ * 44x has a 32K dcache and 32 byte line size.
+ * 8xx has 1, 2, 4, 8K variants.
+ * For now, cover the worst case of the 44x.
+ * Must be called with external interrupts disabled.
+ */
+#define CACHE_NWAYS 64
+#define CACHE_NLINES 32
+
+_GLOBAL(flush_dcache)
+ li r4,(2 * CACHE_NWAYS * CACHE_NLINES)
+ mtctr r4
+ lis r5,0
+1: lwz r3,0(r5) /* Load one word from every line */
+ addi r5,r5,L1_CACHE_BYTES
+ bdnz 1b
+ sync
+ blr
+
+_GLOBAL(invalidate_dcache)
+ addi r6,0,0x0000 /* clear GPR 6 */
+ /* Do loop for # of dcache congruence classes. */
+ lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
+ ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6,L1_CACHE_BYTES /* bump to next line */
+ bdnz ..dcloop
+ sync
+ blr
+
+/*
+ * Cache functions.
+ *
+ * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
+ * although for some cache-ralated calls stubs have to be provided to satisfy
+ * symbols resolution.
+ * Icache-related functions are used in POST framework.
+ *
+ */
+#ifdef CONFIG_440
+
+ .globl dcache_disable
+ .globl dcache_enable
+ .globl icache_disable
+ .globl icache_enable
+dcache_disable:
+dcache_enable:
+icache_disable:
+icache_enable:
+ blr
+
+ .globl dcache_status
+ .globl icache_status
+dcache_status:
+icache_status:
+ mr r3, 0
+ blr
+
+#else /* CONFIG_440 */
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ addis r3,r0, 0xc000 /* set bit 0 */
+ mticcr r3
+ blr
+
+ .globl icache_disable
+icache_disable:
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mticcr r3
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mficcr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mflr r8
+ bl flush_dcache
+ mtlr r8
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfdccr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+#endif /* CONFIG_440 */
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/ppc4xx_config.h>
+#include <asm/io.h>
+
+static void print_configs(int cur_config_nr)
+{
+ int i;
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ printf("%-16s - %s", ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+ if (i == cur_config_nr)
+ printf(" ***");
+ printf("\n");
+ }
+
+}
+
+static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ int ret;
+ int cur_config_nr = -1;
+ u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
+
+ /*
+ * First switch to correct I2C bus. This is I2C bus 0
+ * for all currently available 4xx derivats.
+ */
+ I2C_SET_BUS(0);
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ if (ret) {
+ printf("Error reading EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ /*
+ * Search the current configuration
+ */
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ if (memcmp(cur_config, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
+ cur_config_nr = i;
+ }
+
+ if (cur_config_nr == -1) {
+ printf("Warning: The I2C bootstrap values don't match any"
+ " of the available options!\n");
+ printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
+ printf("%02x ", cur_config[i]);
+ }
+ printf("\n");
+ }
+
+ if (argc < 2) {
+ printf("Available configurations (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ print_configs(cur_config_nr);
+ return 0;
+ }
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ /*
+ * Search for configuration name/label
+ */
+ if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
+ printf("Using configuration:\n%-16s - %s\n",
+ ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ if (ret) {
+ printf("Error updating EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ printf("done (dump via 'i2c md %x 0.1 %x')\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+ printf("Reset the board for the changes to"
+ " take effect\n");
+ return 0;
+ }
+ }
+
+ printf("Configuration %s not found!\n", argv[1]);
+ print_configs(cur_config_nr);
+ return -1;
+}
+
+U_BOOT_CMD(
+ chip_config, 2, 0, do_chip_config,
+ "program the I2C bootstrap EEPROM",
+ "[config-label]"
+);
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Atapted for ppc4XX by Denis Peter
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+#if defined(CONFIG_SYS_POST_WORD_ADDR)
+# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
+#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
+# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
+#endif
+
+void post_word_store (ulong a)
+{
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ out_be32(save_addr, a);
+}
+
+ulong post_word_load (void)
+{
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ return in_be32(save_addr);
+}
+
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
+
+ save_addr[0] = a;
+ save_addr[1] = BOOTCOUNT_MAGIC;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
+
+ if (save_addr[1] != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return save_addr[0];
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_440,$(is440)))
+PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
+else
+PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
+endif
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/ppc4xx/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_reset(void);
+
+/*
+ * To provide an interface to detect CPU number for boards that support
+ * more then one CPU, we implement the "weak" default functions here.
+ *
+ * Returns CPU number
+ */
+int __get_cpu_num(void)
+{
+ return NA_OR_UNKNOWN_CPU;
+}
+int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+
+#if defined(CONFIG_PCI)
+#if defined(CONFIG_405GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define PCI_ASYNC
+
+static int pci_async_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ unsigned long val;
+
+ mfsdr(SDR0_SDSTP1, val);
+ return (val & SDR0_SDSTP1_PAME_MASK);
+#endif
+}
+#endif
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+ !defined(CONFIG_405) && !defined(CONFIG_405EX)
+int pci_arbiter_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
+#endif
+
+#if defined(CONFIG_405EP)
+ return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
+#endif
+
+#if defined(CONFIG_440GP)
+ return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ unsigned long val;
+
+ mfsdr(SDR0_XCR, val);
+ return (val & 0x80000000);
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ unsigned long val;
+
+ mfsdr(SDR0_PCI0, val);
+ return (val & 0x80000000);
+#endif
+}
+#endif
+
+#if defined(CONFIG_405EP)
+#define I2C_BOOTROM
+
+static int i2c_bootrom_enabled(void)
+{
+#if defined(CONFIG_405EP)
+ return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
+#else
+ unsigned long val;
+
+ mfsdr(SDR0_SDCS0, val);
+ return (val & SDR0_SDCS_SDD);
+#endif
+}
+#endif
+
+#if defined(CONFIG_440GX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (16 bits)",
+ "EBC (8 bits)",
+ "EBC (32 bits)",
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "Reserved",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PINSTP_SHIFT 30
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "NAND (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "PCI",
+ "PCI",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
+#endif
+
+#if defined(CONFIG_460SX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (32 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
+#endif
+
+#if defined(CONFIG_405EZ)
+#define SDR0_PINSTP_SHIFT 28
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "SPI (fast)",
+ "NAND (512 page, 4 addr cycle)",
+ "I2C (Addr 0x50)",
+ "EBC (32 bits)",
+ "I2C (Addr 0x50)",
+ "NAND (2K page, 5 addr cycle)",
+ "I2C (Addr 0x50)",
+ "EBC (16 bits)",
+ "Reserved",
+ "NAND (2K page, 4 addr cycle)",
+ "I2C (Addr 0x50)",
+ "NAND (512 page, 3 addr cycle)",
+ "I2C (Addr 0x50)",
+ "SPI (slow)",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
+ 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
+#endif
+
+#if defined(CONFIG_405EX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)",
+ "EBC (8 bits)",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(SDR0_PINSTP_SHIFT)
+static int bootstrap_option(void)
+{
+ unsigned long val;
+
+ mfsdr(SDR0_PINSTP, val);
+ return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
+}
+#endif /* SDR0_PINSTP_SHIFT */
+
+
+#if defined(CONFIG_440)
+static int do_chip_reset (unsigned long sys0, unsigned long sys1)
+{
+ /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
+ * reset.
+ */
+ mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */
+ mtdcr (CPC0_SYS0, sys0);
+ mtdcr (CPC0_SYS1, sys1);
+ mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */
+ mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
+
+ return 1;
+}
+#endif
+
+
+int checkcpu (void)
+{
+#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
+ uint pvr = get_pvr();
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 reg;
+#endif
+
+#if !defined(CONFIG_IOP480)
+ char addstr[64] = "";
+ sys_info_t sys_info;
+ int cpu_num;
+
+ cpu_num = get_cpu_num();
+ if (cpu_num >= 0)
+ printf("CPU%d: ", cpu_num);
+ else
+ puts("CPU: ");
+
+ get_sys_info(&sys_info);
+
+#if defined(CONFIG_XILINX_440)
+ puts("IBM PowerPC 4");
+#else
+ puts("AMCC PowerPC 4");
+#endif
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX)
+ puts("05");
+#endif
+#if defined(CONFIG_440)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ puts("60");
+#else
+ puts("40");
+#endif
+#endif
+
+ switch (pvr) {
+ case PVR_405GP_RB:
+ puts("GP Rev. B");
+ break;
+
+ case PVR_405GP_RC:
+ puts("GP Rev. C");
+ break;
+
+ case PVR_405GP_RD:
+ puts("GP Rev. D");
+ break;
+
+#ifdef CONFIG_405GP
+ case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
+ puts("GP Rev. E");
+ break;
+#endif
+
+ case PVR_405CR_RA:
+ puts("CR Rev. A");
+ break;
+
+ case PVR_405CR_RB:
+ puts("CR Rev. B");
+ break;
+
+#ifdef CONFIG_405CR
+ case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
+ puts("CR Rev. C");
+ break;
+#endif
+
+ case PVR_405GPR_RB:
+ puts("GPr Rev. B");
+ break;
+
+ case PVR_405EP_RB:
+ puts("EP Rev. B");
+ break;
+
+ case PVR_405EZ_RA:
+ puts("EZ Rev. A");
+ break;
+
+ case PVR_405EX1_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RA:
+ puts("EXr Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EX1_RC:
+ puts("EX Rev. C");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EX2_RC:
+ puts("EX Rev. C");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EXR1_RC:
+ puts("EXr Rev. C");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RC:
+ puts("EXr Rev. C");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EX1_RD:
+ puts("EX Rev. D");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EX2_RD:
+ puts("EX Rev. D");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EXR1_RD:
+ puts("EXr Rev. D");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RD:
+ puts("EXr Rev. D");
+ strcpy(addstr, "No Security support");
+ break;
+
+#if defined(CONFIG_440)
+ case PVR_440GP_RB:
+ puts("GP Rev. B");
+ /* See errata 1.12: CHIP_4 */
+ if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
+ (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
+ puts ( "\n\t CPC0_SYSx DCRs corrupted. "
+ "Resetting chip ...\n");
+ udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
+ do_chip_reset ( mfdcr(CPC0_STRP0),
+ mfdcr(CPC0_STRP1) );
+ }
+ break;
+
+ case PVR_440GP_RC:
+ puts("GP Rev. C");
+ break;
+
+ case PVR_440GX_RA:
+ puts("GX Rev. A");
+ break;
+
+ case PVR_440GX_RB:
+ puts("GX Rev. B");
+ break;
+
+ case PVR_440GX_RC:
+ puts("GX Rev. C");
+ break;
+
+ case PVR_440GX_RF:
+ puts("GX Rev. F");
+ break;
+
+ case PVR_440EP_RA:
+ puts("EP Rev. A");
+ break;
+
+#ifdef CONFIG_440EP
+ case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
+ puts("EP Rev. B");
+ break;
+
+ case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */
+ puts("EP Rev. C");
+ break;
+#endif /* CONFIG_440EP */
+
+#ifdef CONFIG_440GR
+ case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
+ puts("GR Rev. A");
+ break;
+
+ case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */
+ puts("GR Rev. B");
+ break;
+#endif /* CONFIG_440GR */
+#endif /* CONFIG_440 */
+
+#ifdef CONFIG_440EPX
+ case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("EPx Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("EPx Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+#endif /* CONFIG_440EPX */
+
+#ifdef CONFIG_440GRX
+ case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("GRx Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("GRx Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+#endif /* CONFIG_440GRX */
+
+ case PVR_440SP_6_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SP_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SP_6_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SP_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SPe_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SPe_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ case PVR_460EX_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460EX_SE_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460EX_RB:
+ puts("EX Rev. B");
+ mfsdr(SDR0_ECID3, reg);
+ if (reg & 0x00100000)
+ strcpy(addstr, "No Security/Kasumi support");
+ else
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460GT_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460GT_SE_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460GT_RB:
+ puts("GT Rev. B");
+ mfsdr(SDR0_ECID3, reg);
+ if (reg & 0x00100000)
+ strcpy(addstr, "No Security/Kasumi support");
+ else
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+#endif
+
+ case PVR_460SX_RA:
+ puts("SX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460SX_RA_V1:
+ puts("SX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_460GX_RA:
+ puts("GX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460GX_RA_V1:
+ puts("GX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_VIRTEX5:
+ puts("x5 VIRTEX5");
+ break;
+
+ default:
+ printf (" UNKNOWN (PVR=%08x)", pvr);
+ break;
+ }
+
+ printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
+ strmhz(buf, clock),
+ sys_info.freqPLB / 1000000,
+ get_OPB_freq() / 1000000,
+ sys_info.freqEBC / 1000000);
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+ printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
+#endif
+ printf(")\n");
+
+ if (addstr[0] != 0)
+ printf(" %s\n", addstr);
+
+#if defined(I2C_BOOTROM)
+ printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#endif /* I2C_BOOTROM */
+#if defined(SDR0_PINSTP_SHIFT)
+ printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
+ printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
+#ifdef CONFIG_NAND_U_BOOT
+ puts(", booting from NAND");
+#endif /* CONFIG_NAND_U_BOOT */
+ putc('\n');
+#endif /* SDR0_PINSTP_SHIFT */
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
+ printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
+#endif
+
+#if defined(CONFIG_PCI) && defined(PCI_ASYNC)
+ if (pci_async_enabled()) {
+ printf (", PCI async ext clock used");
+ } else {
+ printf (", PCI sync clock at %lu MHz",
+ sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
+ }
+#endif
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
+ putc('\n');
+#endif
+
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
+ printf (" 16 kB I-Cache 16 kB D-Cache");
+#elif defined(CONFIG_440)
+ printf (" 32 kB I-Cache 32 kB D-Cache");
+#else
+ printf (" 16 kB I-Cache %d kB D-Cache",
+ ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
+#endif
+#endif /* !defined(CONFIG_IOP480) */
+
+#if defined(CONFIG_IOP480)
+ printf ("PLX IOP480 (PVR=%08x)", pvr);
+ printf (" at %s MHz:", strmhz(buf, clock));
+ printf (" %u kB I-Cache", 4);
+ printf (" %u kB D-Cache", 2);
+#endif
+
+#endif /* !defined(CONFIG_405) */
+
+ putc ('\n');
+
+ return 0;
+}
+
+int ppc440spe_revB() {
+ unsigned int pvr;
+
+ pvr = get_pvr();
+ if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
+ return 1;
+ else
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_BOARD_RESET)
+ board_reset();
+#else
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
+#else
+ /*
+ * Initiate system reset in debug control register DBCR
+ */
+ mtspr(SPRN_DBCR0, 0x30000000);
+#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
+#endif /* defined(CONFIG_BOARD_RESET) */
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+#if !defined(CONFIG_IOP480)
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+ return (sys_info.freqProcessor);
+#else
+ return (66000000);
+#endif
+
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+ reset_4xx_watchdog();
+ if (re_enable) enable_interrupts();
+}
+
+void reset_4xx_watchdog(void)
+{
+ /*
+ * Clear TSR(WIS) bit
+ */
+ mtspr(SPRN_TSR, 0x40000000);
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_PPC4xx_EMAC)
+ ppc_4xx_eth_initialize(bis);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <ppc4xx_enet.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG 0
+#endif
+
+void reconfigure_pll(u32 new_cpu_freq)
+{
+#if defined(CONFIG_440EPX)
+ int reset_needed = 0;
+ u32 reg, temp;
+ u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
+ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
+ fbdv, target_fbdv, lfbdv, target_lfbdv,
+ perdv0, target_perdv0, /* CLK_PERD */
+ spcid0, target_spcid0; /* CLK_SPCID */
+
+ /* Reconfigure clocks if necessary.
+ * See PPC440EPx User's Manual, sections 8.2 and 14 */
+ if (new_cpu_freq == 667) {
+ target_prbdv0 = 2;
+ target_fwdva = 2;
+ target_fwdvb = 4;
+ target_fbdv = 20;
+ target_lfbdv = 1;
+ target_perdv0 = 4;
+ target_spcid0 = 4;
+
+ mfcpr(CPR0_PRIMBD0, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+ if (prbdv0 != target_prbdv0) {
+ reg &= ~PRBDV_MASK;
+ reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
+ mtcpr(CPR0_PRIMBD0, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PLLD, reg);
+
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdva = temp ? temp : 16;
+
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdvb = temp ? temp : 8;
+
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+
+ if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
+ ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
+ ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
+ (target_lfbdv == 64 ? 0 : target_lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PERD, reg);
+ perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
+ if (perdv0 != target_perdv0) {
+ reg &= ~CPR0_PERD_PERDV0_MASK;
+ reg |= (target_perdv0 << 24);
+ mtcpr(CPR0_PERD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
+ spcid0 = temp ? temp : 4;
+ if (spcid0 != target_spcid0) {
+ reg &= ~CPR0_SPCID_SPCIDV0_MASK;
+ reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
+ mtcpr(CPR0_SPCID, reg);
+ reset_needed = 1;
+ }
+ }
+
+ /* Get current value of FWDVA.*/
+ mfcpr(CPR0_PLLD, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+
+ /*
+ * Check to see if FWDVA has been set to value of 1. if it has we must
+ * modify it.
+ */
+ if (temp == 1) {
+ mfcpr(CPR0_PLLD, reg);
+ /* Get current value of fbdv. */
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+ /* Get current value of lfbdv. */
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+ /*
+ * Load register that contains current boot strapping option.
+ */
+ mfcpr(CPR0_ICFG, reg);
+ /* Shift strapping option into low 3 bits.*/
+ reg = (reg >> 28);
+
+ if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
+ (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+ /*
+ * Get current value of FWDVA. Assign current FWDVA to
+ * new FWDVB.
+ */
+ mfcpr(CPR0_PLLD, reg);
+ target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdvb = target_fwdvb ? target_fwdvb : 8;
+ /*
+ * Get current value of FWDVB. Assign current FWDVB to
+ * new FWDVA.
+ */
+ target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdva = target_fwdva ? target_fwdva : 16;
+ /*
+ * Update CPR0_PLLD with switched FWDVA and FWDVB.
+ */
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
+ ((fwdvb == 8 ? 0 : fwdvb) << 8) |
+ ((fbdv == 32 ? 0 : fbdv) << 24) |
+ (lfbdv == 64 ? 0 : lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ /* Acknowledge that a reset is required. */
+ reset_needed = 1;
+ }
+ }
+
+ if (reset_needed) {
+ /*
+ * Set reload inhibit so configuration will persist across
+ * processor resets
+ */
+ mfcpr(CPR0_ICFG, reg);
+ reg &= ~CPR0_ICFG_RLI_MASK;
+ reg |= 1 << 31;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* Reset processor if configuration changed */
+ __asm__ __volatile__ ("sync; isync");
+ mtspr(SPRN_DBCR0, 0x20000000);
+ }
+#endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Reconfigure PLL if necessary,
+ * set up the memory map,
+ * initialize a bunch of registers
+ */
+void
+cpu_init_f (void)
+{
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
+ u32 val;
+#endif
+
+ reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
+
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ /*
+ * GPIO0 setup (select GPIO or alternate function)
+ */
+#if defined(CONFIG_SYS_GPIO0_OR)
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
+#endif
+#if defined(CONFIG_SYS_GPIO0_ODR)
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
+#endif
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
+#endif
+#if defined (CONFIG_SYS_GPIO0_TCR)
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
+#endif
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
+
+#if defined (CONFIG_405EP)
+ /*
+ * Set EMAC noise filter bits
+ */
+ mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ gpio_set_chip_configuration();
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
+
+ /*
+ * External Bus Controller (EBC) Setup
+ */
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405))
+ /*
+ * Move the next instructions into icache, since these modify the flash
+ * we are running from!
+ */
+ asm volatile(" bl 0f" ::: "lr");
+ asm volatile("0: mflr 3" ::: "r3");
+ asm volatile(" addi 4, 0, 14" ::: "r4");
+ asm volatile(" mtctr 4" ::: "ctr");
+ asm volatile("1: icbt 0, 3");
+ asm volatile(" addi 3, 3, 32" ::: "r3");
+ asm volatile(" bdnz 1b" ::: "ctr", "cr0");
+ asm volatile(" addis 3, 0, 0x0" ::: "r3");
+ asm volatile(" ori 3, 3, 0xA000" ::: "r3");
+ asm volatile(" mtctr 3" ::: "ctr");
+ asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
+#endif
+
+ mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
+ mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+ mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
+ mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+ mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
+ mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+ mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
+ mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+ mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
+ mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+ mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
+ mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+ mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
+ mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+ mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
+ mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
+#endif
+
+#if defined (CONFIG_SYS_EBC_CFG)
+ mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ val = mfspr(tcr);
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ val |= 0xb8000000; /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+ val |= 0xb0000000; /* generate system reset after 1.34 seconds */
+#else
+ val |= 0xf0000000; /* generate system reset after 2.684 seconds */
+#endif
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ val &= ~0x30000000; /* clear WRC bits */
+ val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+#endif
+ mtspr(tcr, val);
+
+ val = mfspr(tsr);
+ val |= 0x80000000; /* enable watchdog timer */
+ mtspr(tsr, val);
+
+ reset_4xx_watchdog();
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
+ */
+ mfsdr(SDR0_MFR, val);
+ val &= ~0x10000000;
+ mtsdr(SDR0_MFR,val);
+#endif /* CONFIG_440GX */
+
+#if defined(CONFIG_460EX)
+ /*
+ * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
+ * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
+ * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
+ */
+ mfsdr(SDR0_AHB_CFG, val);
+ val |= 0x80;
+ val &= ~0x40;
+ mtsdr(SDR0_AHB_CFG, val);
+ mfsdr(SDR0_USB2HOST_CFG, val);
+ val &= ~0xf00;
+ val |= 0x400;
+ mtsdr(SDR0_USB2HOST_CFG, val);
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
+ */
+ mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
+ PLB0_ACR_RDP_4DEEP);
+ mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
+ PLB1_ACR_RDP_4DEEP);
+#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+#if defined(CONFIG_405GP)
+ uint pvr = get_pvr();
+
+ /*
+ * Set edge conditioning circuitry on PPC405GPr
+ * for compatibility to existing PPC405GP designs.
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ mtdcr(CPC0_ECR, 0x60606000);
+ }
+#endif /* defined(CONFIG_405GP) */
+
+ return 0;
+}
+
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+/*
+ * 440EP(x)/GR(x) PCI async/sync clocking restriction:
+ *
+ * In asynchronous PCI mode, the synchronous PCI clock must meet
+ * certain requirements. The following equation describes the
+ * relationship that must be maintained between the asynchronous PCI
+ * clock and synchronous PCI clock. Select an appropriate PCI:PLB
+ * ratio to maintain the relationship:
+ *
+ * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
+ */
+static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
+{
+ if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
+ return 0;
+ else
+ return 1;
+}
+
+int ppc4xx_pci_sync_clock_config(u32 async)
+{
+ sys_info_t sys_info;
+ u32 sync;
+ int div;
+ u32 reg;
+ u32 spcid_val[] = {
+ CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
+ CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
+
+ get_sys_info(&sys_info);
+ sync = sys_info.freqPCI;
+
+ /*
+ * First check if the equation above is met
+ */
+ if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
+ /*
+ * Reconfigure PCI sync clock to meet the equation.
+ * Start with highest possible PCI sync frequency
+ * (divider 1).
+ */
+ for (div = 1; div <= 4; div++) {
+ sync = sys_info.freqPLB / div;
+ if (ppc4xx_pci_sync_clock_ok(sync, async))
+ break;
+ }
+
+ if (div <= 4) {
+ mtcpr(CPR0_SPCID, spcid_val[div]);
+
+ mfcpr(CPR0_ICFG, reg);
+ reg |= CPR0_ICFG_RLI_MASK;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* do chip reset */
+ mtspr(SPRN_DBCR0, 0x20000000);
+ } else {
+ /* Impossible to configure the PCI sync clock */
+ return -1;
+ }
+ }
+
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+
+#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
+
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define _ASMLANGUAGE
+
+/*****************************************************************************
+ *
+ * XXX - DANGER
+ * These routines make use of self modifying code. DO NOT CALL THEM
+ * UNTIL THEY ARE RELOCATED TO RAM. Additionally, I do not
+ * recommend them for use in anything other than an interactive
+ * debugging environment. This is mainly due to performance reasons.
+ *
+ ****************************************************************************/
+
+/*
+ * static void _create_MFDCR(unsigned short dcrn)
+ *
+ * Builds a 'mfdcr' instruction for get_dcr
+ * function.
+ */
+ .section ".text"
+ .align 2
+ .type _create_MFDCR,@function
+_create_MFDCR:
+ /*
+ * Build up a 'mfdcr' instruction formatted as follows:
+ *
+ * OPCD | RT | DCRF | XO | CR |
+ * ---------------|--------------|--------------|----|
+ * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
+ * | | DCRN | | |
+ * 31 | %r3 | (5..9|0..4) | 323 | 0 |
+ *
+ * Where:
+ * OPCD = opcode - 31
+ * RT = destination register - %r3 return register
+ * DCRF = DCRN # with upper and lower halves swapped
+ * XO = extended opcode - 323
+ * CR = CR[CR0] NOT undefined - 0
+ */
+ rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
+ rlwinm r3, r3, 5, 22, 26
+ or r3, r3, r0
+ slwi r3, r3, 10
+ oris r3, r3, 0x3e30 /* RT = %r3 */
+ ori r3, r3, 323 /* XO = 323 */
+ slwi r3, r3, 1 /* CR = 0 */
+
+ mflr r4
+ stw r3, 0(r4) /* Store instr in get_dcr() */
+ dcbst r0, r4 /* Make sure val is written out */
+ sync /* Wait for write to complete */
+ icbi r0, r4 /* Make sure old instr is dumped */
+ isync /* Wait for icbi to complete */
+
+ blr
+.Lfe1: .size _create_MFDCR,.Lfe1-_create_MFDCR
+/* end _create_MFDCR() */
+
+/*
+ * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
+ *
+ * Builds a 'mtdcr' instruction for set_dcr
+ * function.
+ */
+ .section ".text"
+ .align 2
+ .type _create_MTDCR,@function
+_create_MTDCR:
+ /*
+ * Build up a 'mtdcr' instruction formatted as follows:
+ *
+ * OPCD | RS | DCRF | XO | CR |
+ * ---------------|--------------|--------------|----|
+ * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
+ * | | DCRN | | |
+ * 31 | %r3 | (5..9|0..4) | 451 | 0 |
+ *
+ * Where:
+ * OPCD = opcode - 31
+ * RS = source register - %r4
+ * DCRF = dest. DCRN # with upper and lower halves swapped
+ * XO = extended opcode - 451
+ * CR = CR[CR0] NOT undefined - 0
+ */
+ rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
+ rlwinm r3, r3, 5, 22, 26
+ or r3, r3, r0
+ slwi r3, r3, 10
+ oris r3, r3, 0x3e40 /* RS = %r4 */
+ ori r3, r3, 451 /* XO = 451 */
+ slwi r3, r3, 1 /* CR = 0 */
+
+ mflr r5
+ stw r3, 0(r5) /* Store instr in set_dcr() */
+ dcbst r0, r5 /* Make sure val is written out */
+ sync /* Wait for write to complete */
+ icbi r0, r5 /* Make sure old instr is dumped */
+ isync /* Wait for icbi to complete */
+
+ blr
+.Lfe2: .size _create_MTDCR,.Lfe2-_create_MTDCR
+/* end _create_MTDCR() */
+
+
+/*
+ * unsigned long get_dcr(unsigned short dcrn)
+ *
+ * Return a given DCR's value.
+ */
+ /* */
+ /* XXX - This is self modifying code, hence */
+ /* it is in the data section. */
+ /* */
+ .section ".data"
+ .align 2
+ .globl get_dcr
+ .type get_dcr,@function
+get_dcr:
+ mflr r0 /* Get link register */
+ stwu r1, -32(r1) /* Save back chain and move SP */
+ stw r0, +36(r1) /* Save link register */
+
+ bl _create_MFDCR /* Build following instruction */
+ /* XXX - we build this instuction up on the fly. */
+ .long 0 /* Get DCR's value */
+
+ lwz r0, +36(r1) /* Get saved link register */
+ mtlr r0 /* Restore link register */
+ addi r1, r1, +32 /* Remove frame from stack */
+ blr /* Return to calling function */
+.Lfe3: .size get_dcr,.Lfe3-get_dcr
+/* end get_dcr() */
+
+
+/*
+ * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
+ *
+ * Return a given DCR's value.
+ */
+ /*
+ * XXX - This is self modifying code, hence
+ * it is in the data section.
+ */
+ .section ".data"
+ .align 2
+ .globl set_dcr
+ .type set_dcr,@function
+set_dcr:
+ mflr r0 /* Get link register */
+ stwu r1, -32(r1) /* Save back chain and move SP */
+ stw r0, +36(r1) /* Save link register */
+
+ bl _create_MTDCR /* Build following instruction */
+ /* XXX - we build this instuction up on the fly. */
+ .long 0 /* Set DCR's value */
+
+ lwz r0, +36(r1) /* Get saved link register */
+ mtlr r0 /* Restore link register */
+ addi r1, r1, +32 /* Remove frame from stack */
+ blr /* Return to calling function */
+.Lfe4: .size set_dcr,.Lfe4-set_dcr
+/* end set_dcr() */
+#endif
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/denali_data_eye.c
+ * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
+ *
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+/*-----------------------------------------------------------------------------+
+ * denali_wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+int denali_wait_for_dlllock(void)
+{
+ u32 val;
+ int wait;
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ for (wait = 0; wait != 0xffff; ++wait) {
+ mfsdram(DDR0_17, val);
+ if (DDR0_17_DLLLOCKREG_DECODE(val)) {
+ /* dlllockreg bit on */
+ return 0;
+ }
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+ return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+#define DDR_DCR_BASE 0x10
+#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
+#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
+
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dram_init_complete(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* --------------------------------------------------------------+
+ * Wait for 'DRAM initialization complete' bit in status register
+ * -------------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+ debug("DRAM initialization complete bit in status register did not "
+ "rise\n");
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(void)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
+ };
+
+ ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
+ DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
+ dll_dqs_delay_X++) {
+ /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
+ dll_dqs_delay_X++) { */
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* clear any ECC errors */
+ mtdcr(ddrcfga, DDR0_00);
+ mtdcr(ddrcfgd,
+ mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (denali_wait_for_dlllock() != 0) {
+ printf("dll lock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+ "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ sync();
+ eieio();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur!!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+ "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j = 0; j < NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j = 0; j < NUM_TRIES; j++) {
+ for (k = 0; k < NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r"(&ram_pointer
+ [j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed. */
+ mtdcr(ddrcfga, DDR0_00);
+ if (j < NUM_TRIES
+ || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
+ 0x3F)) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val =
+ dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases =
+ wr_dqs_shift;
+ dll_dqs_delay_X_start_window =
+ dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window =
+ dll_dqs_delay_X;
+ }
+ }
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /* -----------------------------------------------------------+
+ * Largest passing window is now detected.
+ * ----------------------------------------------------------*/
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
+ dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (denali_wait_for_dlllock() != 0) {
+ printf("dll lock did not occur !!!\n");
+ hang();
+ }
+ sync();
+ eieio();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* defined(CONFIG_DDR_DATA_EYE) */
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
--- /dev/null
+/*
+ * arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
+ * DDR2 controller, specifically the 440EPx/GRx.
+ *
+ * (C) Copyright 2007-2008
+ * Larry Johnson, lrj@acm.org.
+ *
+ * Based primarily on arch/powerpc/cpu/ppc4xx/4xx_spd_ddr2.c, which is...
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define MAXDIMMS 2
+#define MAXRANKS 2
+
+#define ONE_BILLION 1000000000
+
+#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#define DLL_DQS_DELAY 0x19
+#define DLL_DQS_BYPASS 0x0B
+#define DQS_OUT_SHIFT 0x7F
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#if defined(CONFIG_4xx_DCACHE)
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+ hang();
+}
+void spd_ddr_init_hang(void)
+ __attribute__ ((weak, alias("__spd_ddr_init_hang")));
+
+#if defined(DEBUG)
+static void print_mcsr(void)
+{
+ printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
+}
+
+static void denali_sdram_register_dump(void)
+{
+ unsigned int sdram_data;
+
+ printf("\n Register Dump:\n");
+ mfsdram(DDR0_00, sdram_data);
+ printf(" DDR0_00 = 0x%08X", sdram_data);
+ mfsdram(DDR0_01, sdram_data);
+ printf(" DDR0_01 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_02, sdram_data);
+ printf(" DDR0_02 = 0x%08X", sdram_data);
+ mfsdram(DDR0_03, sdram_data);
+ printf(" DDR0_03 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_04, sdram_data);
+ printf(" DDR0_04 = 0x%08X", sdram_data);
+ mfsdram(DDR0_05, sdram_data);
+ printf(" DDR0_05 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_06, sdram_data);
+ printf(" DDR0_06 = 0x%08X", sdram_data);
+ mfsdram(DDR0_07, sdram_data);
+ printf(" DDR0_07 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_08, sdram_data);
+ printf(" DDR0_08 = 0x%08X", sdram_data);
+ mfsdram(DDR0_09, sdram_data);
+ printf(" DDR0_09 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_10, sdram_data);
+ printf(" DDR0_10 = 0x%08X", sdram_data);
+ mfsdram(DDR0_11, sdram_data);
+ printf(" DDR0_11 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_12, sdram_data);
+ printf(" DDR0_12 = 0x%08X", sdram_data);
+ mfsdram(DDR0_14, sdram_data);
+ printf(" DDR0_14 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_17, sdram_data);
+ printf(" DDR0_17 = 0x%08X", sdram_data);
+ mfsdram(DDR0_18, sdram_data);
+ printf(" DDR0_18 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_19, sdram_data);
+ printf(" DDR0_19 = 0x%08X", sdram_data);
+ mfsdram(DDR0_20, sdram_data);
+ printf(" DDR0_20 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_21, sdram_data);
+ printf(" DDR0_21 = 0x%08X", sdram_data);
+ mfsdram(DDR0_22, sdram_data);
+ printf(" DDR0_22 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_23, sdram_data);
+ printf(" DDR0_23 = 0x%08X", sdram_data);
+ mfsdram(DDR0_24, sdram_data);
+ printf(" DDR0_24 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_25, sdram_data);
+ printf(" DDR0_25 = 0x%08X", sdram_data);
+ mfsdram(DDR0_26, sdram_data);
+ printf(" DDR0_26 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_27, sdram_data);
+ printf(" DDR0_27 = 0x%08X", sdram_data);
+ mfsdram(DDR0_28, sdram_data);
+ printf(" DDR0_28 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_31, sdram_data);
+ printf(" DDR0_31 = 0x%08X", sdram_data);
+ mfsdram(DDR0_32, sdram_data);
+ printf(" DDR0_32 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_33, sdram_data);
+ printf(" DDR0_33 = 0x%08X", sdram_data);
+ mfsdram(DDR0_34, sdram_data);
+ printf(" DDR0_34 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_35, sdram_data);
+ printf(" DDR0_35 = 0x%08X", sdram_data);
+ mfsdram(DDR0_36, sdram_data);
+ printf(" DDR0_36 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_37, sdram_data);
+ printf(" DDR0_37 = 0x%08X", sdram_data);
+ mfsdram(DDR0_38, sdram_data);
+ printf(" DDR0_38 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_39, sdram_data);
+ printf(" DDR0_39 = 0x%08X", sdram_data);
+ mfsdram(DDR0_40, sdram_data);
+ printf(" DDR0_40 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_41, sdram_data);
+ printf(" DDR0_41 = 0x%08X", sdram_data);
+ mfsdram(DDR0_42, sdram_data);
+ printf(" DDR0_42 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_43, sdram_data);
+ printf(" DDR0_43 = 0x%08X", sdram_data);
+ mfsdram(DDR0_44, sdram_data);
+ printf(" DDR0_44 = 0x%08X\n", sdram_data);
+}
+#else
+static inline void denali_sdram_register_dump(void)
+{
+}
+
+inline static void print_mcsr(void)
+{
+}
+#endif /* defined(DEBUG) */
+
+static int is_ecc_enabled(void)
+{
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
+}
+
+static unsigned char spd_read(u8 chip, unsigned int addr)
+{
+ u8 data[2];
+
+ if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
+ debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
+ return 0;
+ }
+ debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
+ chip, addr, data[0]);
+ return data[0];
+}
+
+static unsigned long get_tcyc(unsigned char reg)
+{
+ /*
+ * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
+ * nibbles: the higher order nibble (bits 4-7) designates the cycle time
+ * to a granularity of 1ns; the value presented by the lower order
+ * nibble (bits 0-3) has a granularity of .1ns and is added to the value
+ * designated by the higher nibble. In addition, four lines of the lower
+ * order nibble are assigned to support +.25, +.33, +.66, and +.75.
+ */
+
+ unsigned char subfield_b = reg & 0x0F;
+
+ switch (subfield_b & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ return 1000 * (reg >> 4) + 100 * subfield_b;
+ case 0xA:
+ return 1000 * (reg >> 4) + 250;
+ case 0xB:
+ return 1000 * (reg >> 4) + 333;
+ case 0xC:
+ return 1000 * (reg >> 4) + 667;
+ case 0xD:
+ return 1000 * (reg >> 4) + 750;
+ }
+ return 0;
+}
+
+/*------------------------------------------------------------------
+ * Find the installed DIMMs, make sure that the are DDR2, and fill
+ * in the dimm_ranks array. Then dimm_ranks[dimm_num] > 0 iff the
+ * DIMM and dimm_num is present.
+ * Note: Because there are only two chip-select lines, it is assumed
+ * that a board with a single socket can support two ranks on that
+ * socket, while a board with two sockets can support only one rank
+ * on each socket.
+ *-----------------------------------------------------------------*/
+static void get_spd_info(unsigned long dimm_ranks[],
+ unsigned long *ranks,
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found = FALSE;
+ unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ *ranks = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ unsigned char const dimm_type =
+ spd_read(iic0_dimm_addr[dimm_num], 2);
+
+ unsigned long ranks_on_dimm =
+ (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
+
+ if (8 != dimm_type) {
+ switch (dimm_type) {
+ case 1:
+ printf("ERROR: Standard Fast Page Mode "
+ "DRAM DIMM");
+ break;
+ case 2:
+ printf("ERROR: EDO DIMM");
+ break;
+ case 3:
+ printf("ERROR: Pipelined Nibble DIMM");
+ break;
+ case 4:
+ printf("ERROR: SDRAM DIMM");
+ break;
+ case 5:
+ printf("ERROR: Multiplexed ROM DIMM");
+ break;
+ case 6:
+ printf("ERROR: SGRAM DIMM");
+ break;
+ case 7:
+ printf("ERROR: DDR1 DIMM");
+ break;
+ default:
+ printf("ERROR: Unknown DIMM (type %d)",
+ (unsigned int)dimm_type);
+ break;
+ }
+ printf(" detected in slot %lu.\n", dimm_num);
+ printf("Only DDR2 SDRAM DIMMs are supported."
+ "\n");
+ printf("Replace the module with a DDR2 DIMM."
+ "\n\n");
+ spd_ddr_init_hang();
+ }
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
+ "\n", dimm_num, ranks_on_dimm);
+ if (ranks_on_dimm > max_ranks_per_dimm) {
+ printf("WARNING: DRAM DIMM in slot %lu has %lu "
+ "ranks.\n", dimm_num, ranks_on_dimm);
+ if (1 == max_ranks_per_dimm) {
+ printf("Only one rank will be used.\n");
+ } else {
+ printf
+ ("Only two ranks will be used.\n");
+ }
+ ranks_on_dimm = max_ranks_per_dimm;
+ }
+ dimm_ranks[dimm_num] = ranks_on_dimm;
+ *ranks += ranks_on_dimm;
+ } else {
+ dimm_ranks[dimm_num] = 0;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+ if (dimm_found == FALSE) {
+ printf("ERROR: No memory installed.\n");
+ printf("Install at least one DDR2 DIMM.\n\n");
+ spd_ddr_init_hang();
+ }
+ debug("Total number of ranks = %d\n", *ranks);
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_ranks,
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long cycle_time;
+ unsigned long calc_cycle_time;
+
+ /*
+ * calc_cycle_time is calculated from DDR frequency set by board/chip
+ * and is expressed in picoseconds to match the way DIMM cycle time is
+ * calculated below.
+ */
+ calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ cycle_time =
+ get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
+ debug("cycle_time=%d ps\n", cycle_time);
+
+ if (cycle_time > (calc_cycle_time + 10)) {
+ /*
+ * the provided sdram cycle_time is too small
+ * for the available DIMM cycle_time. The
+ * additionnal 10ps is here to accept a small
+ * incertainty.
+ */
+ printf
+ ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+ "slot %d \n while calculated cycle time is %d ps.\n",
+ (unsigned int)cycle_time,
+ (unsigned int)dimm_num,
+ (unsigned int)calc_cycle_time);
+ printf
+ ("Replace the DIMM, or change DDR frequency via "
+ "strapping bits.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * This routine gets size information for the installed memory
+ * DIMMs.
+ *-----------------------------------------------------------------*/
+static void get_dimm_size(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long *const rows,
+ unsigned long *const banks,
+ unsigned long *const cols, unsigned long *const width)
+{
+ unsigned long dimm_num;
+
+ *rows = 0;
+ *banks = 0;
+ *cols = 0;
+ *width = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ unsigned long t;
+
+ /* Rows */
+ t = spd_read(iic0_dimm_addr[dimm_num], 3);
+ if (0 == *rows) {
+ *rows = t;
+ } else if (t != *rows) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of rows.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Banks */
+ t = spd_read(iic0_dimm_addr[dimm_num], 17);
+ if (0 == *banks) {
+ *banks = t;
+ } else if (t != *banks) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of banks.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Columns */
+ t = spd_read(iic0_dimm_addr[dimm_num], 4);
+ if (0 == *cols) {
+ *cols = t;
+ } else if (t != *cols) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of columns.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Data width */
+ t = spd_read(iic0_dimm_addr[dimm_num], 6);
+ if (0 == *width) {
+ *width = t;
+ } else if (t != *width) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same data width.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+ debug("Number of rows = %d\n", *rows);
+ debug("Number of columns = %d\n", *cols);
+ debug("Number of banks = %d\n", *banks);
+ debug("Data width = %d\n", *width);
+ if (*rows > 14) {
+ printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
+ *rows);
+ printf("Only modules with 14 or fewer rows are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (4 != *banks && 8 != *banks) {
+ printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
+ printf("Only modules with 4 or 8 banks are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (*cols > 12) {
+ printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
+ *cols);
+ printf("Only modules with 12 or fewer columns are "
+ "supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
+ printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
+ *width);
+ printf("Only modules with widths of 32, 40, 64, and 72 bits "
+ "are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+}
+
+/*------------------------------------------------------------------
+ * Only 1.8V modules are supported. This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (0x05 != voltage_type) { /* 1.8V for DDR2 */
+ printf("ERROR: Slot %lu provides 1.8V for DDR2 "
+ "DIMMs.\n", dimm_num);
+ switch (voltage_type) {
+ case 0x00:
+ printf("This DIMM is 5.0 Volt/TTL.\n");
+ break;
+ case 0x01:
+ printf("This DIMM is LVTTL.\n");
+ break;
+ case 0x02:
+ printf("This DIMM is 1.5 Volt.\n");
+ break;
+ case 0x03:
+ printf("This DIMM is 3.3 Volt/TTL.\n");
+ break;
+ case 0x04:
+ printf("This DIMM is 2.5 Volt.\n");
+ break;
+ default:
+ printf("This DIMM is an unknown "
+ "voltage.\n");
+ break;
+ }
+ printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+}
+
+static void program_ddr0_03(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq,
+ unsigned long rows, unsigned long *cas_latency)
+{
+ unsigned long dimm_num;
+ unsigned long cas_index;
+ unsigned long cycle_2_0_clk;
+ unsigned long cycle_3_0_clk;
+ unsigned long cycle_4_0_clk;
+ unsigned long cycle_5_0_clk;
+ unsigned long max_2_0_tcyc_ps = 100;
+ unsigned long max_3_0_tcyc_ps = 100;
+ unsigned long max_4_0_tcyc_ps = 100;
+ unsigned long max_5_0_tcyc_ps = 100;
+ unsigned char cas_available = 0x3C; /* value for DDR2 */
+ u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
+ unsigned int const tcyc_addr[3] = { 9, 23, 25 };
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ debug("sdram_freq = %d\n", sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned char const cas_bit =
+ spd_read(iic0_dimm_addr[dimm_num], 18);
+ unsigned char cas_mask;
+
+ cas_available &= cas_bit;
+ for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
+ if (cas_bit & cas_mask)
+ break;
+ }
+ debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
+ cas_bit, cas_mask);
+
+ for (cas_index = 0; cas_index < 3;
+ cas_mask >>= 1, cas_index++) {
+ unsigned long cycle_time_ps;
+
+ if (!(cas_available & cas_mask)) {
+ continue;
+ }
+ cycle_time_ps =
+ get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
+ tcyc_addr[cas_index]));
+
+ debug("cas_index = %d: cycle_time_ps = %d\n",
+ cas_index, cycle_time_ps);
+ /*
+ * DDR2 devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
+ */
+ switch (cas_mask) {
+ case 0x20:
+ max_5_0_tcyc_ps =
+ max(max_5_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x10:
+ max_4_0_tcyc_ps =
+ max(max_4_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x08:
+ max_3_0_tcyc_ps =
+ max(max_3_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x04:
+ max_2_0_tcyc_ps =
+ max(max_2_0_tcyc_ps, cycle_time_ps);
+ break;
+ }
+ }
+ }
+ }
+ debug("cas_available (bit map) = 0x%02X\n", cas_available);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM mode, SDRAM_MMODE
+ *-----------------------------------------------------------------*/
+
+ /* add 10 here because of rounding problems */
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
+ debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
+ debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
+
+ if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
+ *cas_latency = 2;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x4);
+ } else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
+ *cas_latency = 3;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x6);
+ } else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
+ *cas_latency = 4;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x8);
+ } else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
+ *cas_latency = 5;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
+ DDR0_03_CASLAT_LIN_ENCODE(0xA);
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the "
+ "installed DIMMs.\n");
+ printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
+ "and 5.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range "
+ "of the DIMMs.\n");
+ printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
+ "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
+ cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
+ spd_ddr_init_hang();
+ }
+ debug("CAS latency = %d\n", *cas_latency);
+ mtsdram(DDR0_03, ddr0_03);
+}
+
+static void program_ddr0_04(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rc_ps = 0;
+ unsigned long t_rrd_ps = 0;
+ unsigned long t_rtp_ps = 0;
+ unsigned long t_rc_clk;
+ unsigned long t_rrd_clk;
+ unsigned long t_rtp_clk;
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tRC */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
+ switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
+ case 0x1:
+ ps += 250;
+ break;
+ case 0x2:
+ ps += 333;
+ break;
+ case 0x3:
+ ps += 500;
+ break;
+ case 0x4:
+ ps += 667;
+ break;
+ case 0x5:
+ ps += 750;
+ break;
+ }
+ t_rc_ps = max(t_rc_ps, ps);
+ /* tRRD */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
+ t_rrd_ps = max(t_rrd_ps, ps);
+ /* tRTP */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
+ t_rtp_ps = max(t_rtp_ps, ps);
+ }
+ }
+ debug("t_rc_ps = %d\n", t_rc_ps);
+ t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rrd_ps = %d\n", t_rrd_ps);
+ t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rtp_ps = %d\n", t_rtp_ps);
+ t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
+ DDR0_04_TRRD_ENCODE(t_rrd_clk) |
+ DDR0_04_TRTP_ENCODE(t_rtp_clk));
+}
+
+static void program_ddr0_05(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rp_ps = 0;
+ unsigned long t_ras_ps = 0;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_clk;
+ u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tRP */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
+ t_rp_ps = max(t_rp_ps, ps);
+ /* tRAS */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
+ t_ras_ps = max(t_ras_ps, ps);
+ }
+ }
+ debug("t_rp_ps = %d\n", t_rp_ps);
+ t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_ras_ps = %d\n", t_ras_ps);
+ t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
+ DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
+}
+
+static void program_ddr0_06(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned char spd_40;
+ unsigned long t_wtr_ps = 0;
+ unsigned long t_rfc_ps = 0;
+ unsigned long t_wtr_clk;
+ unsigned long t_rfc_clk;
+ u32 ddr0_06 =
+ DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tWTR */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
+ t_wtr_ps = max(t_wtr_ps, ps);
+ /* tRFC */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
+ spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
+ ps += 256000 * (spd_40 & 0x01);
+ switch ((spd_40 & 0x0E) >> 1) {
+ case 0x1:
+ ps += 250;
+ break;
+ case 0x2:
+ ps += 333;
+ break;
+ case 0x3:
+ ps += 500;
+ break;
+ case 0x4:
+ ps += 667;
+ break;
+ case 0x5:
+ ps += 750;
+ break;
+ }
+ t_rfc_ps = max(t_rfc_ps, ps);
+ }
+ }
+ debug("t_wtr_ps = %d\n", t_wtr_ps);
+ t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rfc_ps = %d\n", t_rfc_ps);
+ t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
+ DDR0_06_TRFC_ENCODE(t_rfc_clk));
+}
+
+static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
+{
+ unsigned long csmap;
+
+ if (2 == ranks) {
+ /* Both chip selects in use */
+ csmap = 0x03;
+ } else {
+ /* One chip select in use */
+ csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
+ }
+ mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
+ DDR0_10_CS_MAP_ENCODE(csmap) |
+ DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
+}
+
+static void program_ddr0_11(unsigned long sdram_freq)
+{
+ unsigned long const t_xsnr_ps = 200000; /* 200 ns */
+ unsigned long t_xsnr_clk;
+
+ debug("t_xsnr_ps = %d\n", t_xsnr_ps);
+ t_xsnr_clk =
+ (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
+ DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
+}
+
+static void program_ddr0_22(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks, unsigned long width)
+{
+#if defined(CONFIG_DDR_ECC)
+ unsigned long dimm_num;
+ unsigned long ecc_available = width >= 64;
+ u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+ DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ /* Check for ECC */
+ if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
+ 0x02)) {
+ ecc_available = FALSE;
+ }
+ }
+ }
+ if (ecc_available) {
+ debug("ECC found on all DIMMs present\n");
+ mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
+ } else {
+ debug("ECC not found on some or all DIMMs present\n");
+ mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
+ }
+#else
+ mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
+ DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+ DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
+#endif /* defined(CONFIG_DDR_ECC) */
+}
+
+static void program_ddr0_24(unsigned long ranks)
+{
+ u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) | /* 75 ohm */
+ DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
+
+ if (2 == ranks) {
+ /* Both chip selects in use */
+ ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
+ DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
+ } else {
+ /* One chip select in use */
+ /* One of the two fields added to ddr0_24 is a "don't care" */
+ ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
+ DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
+ }
+ mtsdram(DDR0_24, ddr0_24);
+}
+
+static void program_ddr0_26(unsigned long sdram_freq)
+{
+ unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
+ /* TODO: check definition of tRAS_MAX */
+ unsigned long const t_ras_max_ps = 9 * t_ref_ps;
+ unsigned long t_ras_max_clk;
+ unsigned long t_ref_clk;
+
+ /* Round down t_ras_max_clk and t_ref_clk */
+ debug("t_ras_max_ps = %d\n", t_ras_max_ps);
+ t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
+ debug("t_ref_ps = %d\n", t_ref_ps);
+ t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
+ mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
+ DDR0_26_TREF_ENCODE(t_ref_clk));
+}
+
+static void program_ddr0_27(unsigned long sdram_freq)
+{
+ unsigned long const t_init_ps = 200000000; /* 200 us. init */
+ unsigned long t_init_clk;
+
+ debug("t_init_ps = %d\n", t_init_ps);
+ t_init_clk =
+ (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
+ DDR0_27_TINIT_ENCODE(t_init_clk));
+}
+
+static void program_ddr0_43(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq,
+ unsigned long cols, unsigned long banks)
+{
+ unsigned long dimm_num;
+ unsigned long t_wr_ps = 0;
+ unsigned long t_wr_clk;
+ u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
+ DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
+ DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
+ t_wr_ps = max(t_wr_ps, ps);
+ }
+ }
+ debug("t_wr_ps = %d\n", t_wr_ps);
+ t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
+}
+
+static void program_ddr0_44(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rcd_ps = 0;
+ unsigned long t_rcd_clk;
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
+ t_rcd_ps = max(t_rcd_ps, ps);
+ }
+ }
+ debug("t_rcd_ps = %d\n", t_rcd_ps);
+ t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space. It is important that the routine does not require .sbss, .bss or
+ * .data sections. It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures SDRAM memory banks for DDR operation.
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_ranks[MAXDIMMS];
+ unsigned long ranks;
+ unsigned long rows;
+ unsigned long banks;
+ unsigned long cols;
+ unsigned long width;
+ unsigned long const sdram_freq = get_bus_freq(0);
+ unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr); /* on board dimm banks */
+ unsigned long cas_latency = 0; /* to quiet initialization warning */
+ unsigned long dram_size;
+
+ debug("\nEntering initdram()\n");
+
+ /*------------------------------------------------------------------
+ * Stop the DDR-SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*------------------------------------------------------------------
+ * Clear out the serial presence detect buffers.
+ * Perform IIC reads from the dimm. Fill in the spds.
+ * Check to see if the dimm slots are populated
+ *-----------------------------------------------------------------*/
+ get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the frequency supported for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Check and get size information.
+ *-----------------------------------------------------------------*/
+ get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
+ &cols, &width);
+
+ /*------------------------------------------------------------------
+ * Check the voltage type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program registers for SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
+ DDR0_00_DLL_START_POINT_DECODE(0x0A));
+
+ mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
+ DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
+ DDR0_01_INT_MASK_ENCODE(0xFF));
+
+ program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+ rows, &cas_latency);
+
+ program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ /*
+ * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
+ * board SDRAM, but may be overly conservative.
+ */
+ mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
+ DDR0_07_TFAW_ENCODE(13) |
+ DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
+ DDR0_07_AREFRESH_ENCODE(0));
+
+ mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
+ DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
+ DDR0_08_DDRII_ENCODE(1));
+
+ mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
+ DDR0_09_RTT_0_ENCODE(0x1) |
+ DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
+ DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
+
+ program_ddr0_10(dimm_ranks, ranks);
+
+ program_ddr0_11(sdram_freq);
+
+ mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
+
+ mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
+ DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
+ DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
+
+ mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
+
+ mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
+
+ program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
+
+ mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
+ DDR0_23_FWC_ENCODE(0));
+
+ program_ddr0_24(ranks);
+
+ program_ddr0_26(sdram_freq);
+
+ program_ddr0_27(sdram_freq);
+
+ mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
+ DDR0_28_EMRS2_DATA_ENCODE(0x0000));
+
+ mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
+
+ mtsdram(DDR0_42, DDR0_42_ADDR_PINS_ENCODE(14 - rows) |
+ DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
+
+ program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+ cols, banks);
+
+ program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ denali_sdram_register_dump();
+
+ dram_size = (width >= 64) ? 8 : 4;
+ dram_size *= 1 << cols;
+ dram_size *= banks;
+ dram_size *= 1 << rows;
+ dram_size *= ranks;
+ debug("dram_size = %lu\n", dram_size);
+
+ /* Start the SDRAM controler */
+ mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
+ denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+ /*
+ * Map the first 1 MiB of memory in the TLB, and perform the data eye
+ * search.
+ */
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
+ denali_core_search_data_eye();
+ denali_sdram_register_dump();
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
+#endif
+
+#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
+ sync();
+ /* Zero the memory */
+ debug("Zeroing SDRAM...");
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+ dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
+#else
+#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
+#endif
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
+ debug("Completed\n");
+ sync();
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
+
+#if defined(CONFIG_DDR_ECC)
+ /*
+ * If ECC is enabled, clear and enable interrupts
+ */
+ if (is_ecc_enabled()) {
+ u32 val;
+
+ sync();
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
+ DDR0_01_INT_MASK_ALL_OFF);
+#if defined(CONFIG_DDR_DATA_EYE)
+ /*
+ * Running denali_core_search_data_eye() when ECC is enabled
+ * causes non-ECC machine checks. This clears them.
+ */
+ print_mcsr();
+ mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
+ print_mcsr();
+#endif
+ sync();
+ }
+#endif /* defined(CONFIG_DDR_ECC) */
+#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
+
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
+ return dram_size;
+}
+
+void board_add_ram_info(int use_default)
+{
+ u32 val;
+
+ printf(" (ECC");
+ if (!is_ecc_enabled()) {
+ printf(" not");
+ }
+ printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
+}
+#endif /* CONFIG_SPD_EEPROM */
--- /dev/null
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * (C) Copyright 2005-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will abe useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * This file implements generic DRAM ECC initialization for
+ * PowerPC processors using a SDRAM DDR/DDR2 controller,
+ * including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
+ * 460EX/GT.
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
+ defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
+
+#if defined(CONFIG_405EX)
+/*
+ * Currently only 405EX uses 16bit data bus width as an alternative
+ * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
+ */
+#define SDRAM_DATA_ALT_WIDTH 2
+#else
+#define SDRAM_DATA_ALT_WIDTH 8
+#endif
+
+static void wait_ddr_idle(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
+static void program_ecc_addr(unsigned long start_address,
+ unsigned long num_bytes,
+ unsigned long tlb_word2_i_value)
+{
+ unsigned long current_address;
+ unsigned long end_address;
+ unsigned long address_increment;
+ unsigned long mcopt1;
+ char str[] = "ECC generation -";
+ char slash[] = "\\|/-\\|/-";
+ int loop = 0;
+ int loopi = 0;
+
+ current_address = start_address;
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ puts(str);
+
+#ifdef CONFIG_440
+ if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+#endif
+ /* ECC bit set method for non-cached memory */
+ if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+ address_increment = 4;
+ else
+ address_increment = SDRAM_DATA_ALT_WIDTH;
+ end_address = current_address + num_bytes;
+
+ while (current_address < end_address) {
+ *((unsigned long *)current_address) = 0;
+ current_address += address_increment;
+
+ if ((loop++ % (2 << 20)) == 0) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+ }
+ }
+#ifdef CONFIG_440
+ } else {
+ /* ECC bit set method for cached memory */
+ dcbz_area(start_address, num_bytes);
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(start_address, start_address + num_bytes);
+ }
+#endif /* CONFIG_440 */
+
+ blank_string(strlen(str));
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ /* clear ECC error repoting registers */
+ mtsdram(SDRAM_ECCES, 0xffffffff);
+ mtdcr(0x4c, 0xffffffff);
+
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
+ sync();
+ eieio();
+ wait_ddr_idle();
+ }
+}
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+void ecc_init(unsigned long * const start, unsigned long size)
+{
+ /*
+ * Init ECC with cache disabled (on PPC's with IBM DDR
+ * controller (non DDR2), not tested with cache enabled yet
+ */
+ program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
+}
+#endif
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+void do_program_ecc(unsigned long tlb_word2_i_value)
+{
+ unsigned long mcopt1;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ phys_size_t memsize = sdram_memsize();
+
+ if (memsize > CONFIG_MAX_MEM_MAPPED) {
+ printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
+ return;
+ }
+
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ /* DDR controller must be enabled and not in self-refresh. */
+ mfsdram(SDRAM_MCSTAT, mcstat);
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+
+ program_ecc_addr(0, memsize, tlb_word2_i_value);
+ }
+ }
+}
+#endif
+
+#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
+#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
--- /dev/null
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * Copyright (c) 2007-2009 DENX Software Engineering, GmbH
+ * Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will abe useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * This file implements ECC initialization for PowerPC processors
+ * using the IBM SDRAM DDR1 & DDR2 controller.
+ *
+ */
+
+#ifndef _ECC_H_
+#define _ECC_H_
+
+/*
+ * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
+ * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
+ * we need to make some processor dependant defines used later on by the
+ * driver.
+ */
+
+/* For 440GP/GX/EP/GR */
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+#define SDRAM_MCOPT1 SDRAM_CFG0
+#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK
+#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON
+#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN
+#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK
+#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK
+#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK
+#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32
+
+#define SDRAM_MCSTAT SDRAM0_MCSTS
+#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS
+#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT
+
+#define SDRAM_ECCES SDRAM0_ECCESR
+#endif
+
+void ecc_init(unsigned long * const start, unsigned long size);
+void do_program_ecc(unsigned long tlb_word2_i_value);
+
+static void inline blank_string(int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ putc('\b');
+ for (i = 0; i < size; i++)
+ putc(' ');
+ for (i = 0; i < size; i++)
+ putc('\b');
+}
+
+#endif /* _ECC_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#include <asm/4xx_pcie.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+ int i;
+ u32 bxcr;
+ u32 ranges[EBC_NUM_BANKS * 4];
+ u32 *p = ranges;
+ char ebc_path[] = "/plb/opb/ebc";
+
+ ft_cpu_setup(blob, bd);
+
+ /*
+ * Read 4xx EBC bus bridge registers to get mappings of the
+ * peripheral banks into the OPB/PLB address space
+ */
+ for (i = 0; i < EBC_NUM_BANKS; i++) {
+ mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
+ bxcr = mfdcr(EBC0_CFGDATA);
+
+ if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+ *p++ = i;
+ *p++ = 0;
+ *p++ = bxcr & EBC_BXCR_BAS_MASK;
+ *p++ = EBC_BXCR_BANK_SIZE(bxcr);
+
+#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+ /* Try to update reg property in nor flash node too */
+ fdt_fixup_nor_flash_size(blob, i,
+ EBC_BXCR_BANK_SIZE(bxcr));
+#endif
+ }
+ }
+
+ /* Some 405 PPC's have EBC as direct PLB child in the dts */
+ if (fdt_path_offset(blob, ebc_path) < 0)
+ strcpy(ebc_path, "/plb/ebc");
+ rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+ (p - ranges) * sizeof(u32), 1);
+ if (rc) {
+ printf("Unable to update property EBC mappings, err=%s\n",
+ fdt_strerror(rc));
+ }
+}
+void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+
+/*
+ * Fixup all PCIe nodes by setting the device_type property
+ * to "pci-endpoint" instead is "pci" for endpoint ports.
+ * This property will get checked later by the Linux driver
+ * to properly configure the PCIe port in Linux (again).
+ */
+void fdt_pcie_setup(void *blob)
+{
+ const char *compat = "ibm,plb-pciex";
+ const char *prop = "device_type";
+ const char *prop_val = "pci-endpoint";
+ const u32 *port;
+ int no;
+ int rc;
+
+ /* Search first PCIe node */
+ no = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (no != -FDT_ERR_NOTFOUND) {
+ port = fdt_getprop(blob, no, "port", NULL);
+ if (port == NULL) {
+ printf("WARNING: could not find port property\n");
+ } else {
+ if (is_end_point(*port)) {
+ rc = fdt_setprop(blob, no, prop, prop_val,
+ strlen(prop_val) + 1);
+ if (rc < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop, compat, fdt_strerror(rc));
+ }
+ }
+
+ /* Jump to next PCIe node */
+ no = fdt_node_offset_by_compatible(blob, no, compat);
+ }
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ sys_info_t sys_info;
+ int off, ndepth = 0;
+
+ get_sys_info(&sys_info);
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
+ bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
+ bd->bi_intfreq, 1);
+ do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
+ do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
+
+ if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
+ do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+ else
+ do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ /*
+ * Fixup all UART clocks for CPU internal UARTs
+ * (only these UARTs are definitely clocked by gd->uart_clk)
+ *
+ * These UARTs are direct childs of /plb/opb. This code
+ * does not touch any UARTs that are connected to the ebc.
+ */
+ off = fdt_path_offset(blob, "/plb/opb");
+ while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
+ /*
+ * process all sub nodes and stop when we are back
+ * at the starting depth
+ */
+ if (ndepth <= 0)
+ break;
+
+ /* only update direct childs */
+ if ((ndepth == 1) &&
+ (fdt_node_check_compatible(blob, off, "ns16550") == 0))
+ fdt_setprop(blob, off,
+ "clock-frequency",
+ (void*)&(gd->uart_clk), 4);
+ }
+
+ /*
+ * Fixup all ethernet nodes
+ * Note: aliases in the dts are required for this
+ */
+ fdt_fixup_ethernet(blob);
+
+ /*
+ * Fixup all available PCIe nodes by setting the device_type property
+ */
+ fdt_pcie_setup(blob);
+}
+#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
+#endif
+
+#if defined(GPIO0_OSRL)
+/* Only some 4xx variants support alternate funtions on the GPIO's */
+void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
+{
+ u32 mask;
+ u32 mask2;
+ u32 val;
+ u32 offs = 0;
+ u32 offs2 = 0;
+ int pin2 = pin << 1;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ if (pin >= GPIO_MAX/2) {
+ offs2 = 0x4;
+ pin2 = (pin - GPIO_MAX/2) << 1;
+ }
+
+ mask = 0x80000000 >> pin;
+ mask2 = 0xc0000000 >> pin2;
+
+ /* first set TCR to 0 */
+ out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
+
+ if (in_out == GPIO_OUT) {
+ val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
+ switch (gpio_alt) {
+ case GPIO_ALT1:
+ val |= GPIO_ALT1_SEL >> pin2;
+ break;
+ case GPIO_ALT2:
+ val |= GPIO_ALT2_SEL >> pin2;
+ break;
+ case GPIO_ALT3:
+ val |= GPIO_ALT3_SEL >> pin2;
+ break;
+ }
+ out_be32((void *)GPIO0_OSRL + offs + offs2, val);
+
+ /* setup requested output value */
+ if (out_val == GPIO_OUT_0)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) & ~mask);
+ else if (out_val == GPIO_OUT_1)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) | mask);
+
+ /* now configure TCR to drive output if selected */
+ out_be32((void *)GPIO0_TCR + offs,
+ in_be32((void *)GPIO0_TCR + offs) | mask);
+ } else {
+ val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
+ val |= GPIO_IN_SEL >> pin2;
+ out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
+ }
+}
+#endif /* GPIO_OSRL */
+
+void gpio_write_bit(int pin, int val)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ if (val)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
+ else
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
+}
+
+int gpio_read_out_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
+int gpio_read_in_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+void gpio_set_chip_configuration(void)
+{
+ unsigned char i=0, j=0, offs=0, gpio_core;
+ unsigned long reg, core_add;
+
+ for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
+ j = 0;
+ offs = 0;
+ /* GPIO config of the GPIOs 0 to 31 */
+ for (i=0; i<GPIO_MAX; i++, j++) {
+ if (i == GPIO_MAX/2) {
+ offs = 4;
+ j = i-16;
+ }
+
+ core_add = gpio_tab[gpio_core][i].add;
+
+ if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
+ (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
+
+ switch (gpio_tab[gpio_core][i].alt_nb) {
+ case GPIO_SEL:
+ break;
+
+ case GPIO_ALT1:
+ reg = in_be32((void *)GPIO_IS1(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS1(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT2:
+ reg = in_be32((void *)GPIO_IS2(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS2(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT3:
+ reg = in_be32((void *)GPIO_IS3(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS3(core_add+offs), reg);
+ break;
+ }
+ }
+
+ if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
+ (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
+
+ u32 gpio_alt_sel = 0;
+
+ switch (gpio_tab[gpio_core][i].alt_nb) {
+ case GPIO_SEL:
+ /*
+ * Setup output value
+ * 1 -> high level
+ * 0 -> low level
+ * else -> don't touch
+ */
+ reg = in_be32((void *)GPIO_OR(core_add));
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+ reg |= (0x80000000 >> (i));
+ else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+ reg &= ~(0x80000000 >> (i));
+ out_be32((void *)GPIO_OR(core_add), reg);
+
+ reg = in_be32((void *)GPIO_TCR(core_add)) |
+ (0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+
+ reg = in_be32((void *)GPIO_OS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_OS(core_add+offs), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT1:
+ gpio_alt_sel = GPIO_ALT1_SEL;
+ break;
+
+ case GPIO_ALT2:
+ gpio_alt_sel = GPIO_ALT2_SEL;
+ break;
+
+ case GPIO_ALT3:
+ gpio_alt_sel = GPIO_ALT3_SEL;
+ break;
+ }
+
+ if (0 != gpio_alt_sel) {
+ reg = in_be32((void *)GPIO_OS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
+ out_be32((void *)GPIO_OS(core_add+offs), reg);
+
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ | (0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ } else {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ & ~(0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ }
+ }
+ }
+ }
+ }
+}
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * CPM interrupt vector functions.
+ */
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ int count;
+};
+static struct irq_action irq_vecs[IRQ_MAX];
+
+#if defined(CONFIG_440)
+
+/* SPRN changed in 440 */
+static __inline__ void set_evpr(unsigned long val)
+{
+ asm volatile("mtspr 0x03f,%0" : : "r" (val));
+}
+
+#else /* !defined(CONFIG_440) */
+
+static __inline__ void set_pit(unsigned long val)
+{
+ asm volatile("mtpit %0" : : "r" (val));
+}
+
+
+static __inline__ void set_tcr(unsigned long val)
+{
+ asm volatile("mttcr %0" : : "r" (val));
+}
+
+
+static __inline__ void set_evpr(unsigned long val)
+{
+ asm volatile("mtevpr %0" : : "r" (val));
+}
+#endif /* defined(CONFIG_440 */
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ int vec;
+ unsigned long val;
+
+ /* decrementer is automatically reloaded */
+ *decrementer_count = 0;
+
+ /*
+ * Mark all irqs as free
+ */
+ for (vec = 0; vec < IRQ_MAX; vec++) {
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ irq_vecs[vec].count = 0;
+ }
+
+#ifdef CONFIG_4xx
+ /*
+ * Init PIT
+ */
+#if defined(CONFIG_440)
+ val = mfspr( SPRN_TCR );
+ val &= (~0x04400000); /* clear DIS & ARE */
+ mtspr( SPRN_TCR, val );
+ mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
+ mtspr( SPRN_DECAR, 0 ); /* clear reload */
+ mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
+ val = gd->bd->bi_intfreq/1000; /* 1 msec */
+ mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
+ mtspr( SPRN_DEC, val ); /* Set inital val */
+#else
+ set_pit(gd->bd->bi_intfreq / 1000);
+#endif
+#endif /* CONFIG_4xx */
+
+#ifdef CONFIG_ADCIOP
+ /*
+ * Init PIT
+ */
+ set_pit(66000);
+#endif
+
+ /*
+ * Enable PIT
+ */
+ val = mfspr(SPRN_TCR);
+ val |= 0x04400000;
+ mtspr(SPRN_TCR, val);
+
+ /*
+ * Set EVPR to 0
+ */
+ set_evpr(0x00000000);
+
+ /*
+ * Call uic or xilinx_irq pic_enable
+ */
+ pic_enable();
+
+ return (0);
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+void interrupt_run_handler(int vec)
+{
+ irq_vecs[vec].count++;
+
+ if (irq_vecs[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
+ } else {
+ pic_irq_disable(vec);
+ printf("Masking bogus interrupt vector %d\n", vec);
+ }
+
+ pic_irq_ack(vec);
+ return;
+}
+
+void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
+{
+ /*
+ * Print warning when replacing with a different irq vector
+ */
+ if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
+ printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
+ vec, (uint) handler, (uint) irq_vecs[vec].handler);
+ }
+ irq_vecs[vec].handler = handler;
+ irq_vecs[vec].arg = arg;
+
+ pic_irq_enable(vec);
+ return;
+}
+
+void irq_free_handler(int vec)
+{
+ debug("Free interrupt for vector %d ==> %p\n",
+ vec, irq_vecs[vec].handler);
+
+ pic_irq_disable(vec);
+
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ return;
+}
+
+#if defined(CONFIG_CMD_IRQ)
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int vec;
+
+ printf ("Interrupt-Information:\n");
+ printf ("Nr Routine Arg Count\n");
+
+ for (vec = 0; vec < IRQ_MAX; vec++) {
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("%02d %08lx %08lx %d\n",
+ vec,
+ (ulong)irq_vecs[vec].handler,
+ (ulong)irq_vecs[vec].arg,
+ irq_vecs[vec].count);
+ }
+ }
+
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <watchdog.h>
+
+#ifdef CONFIG_SERIAL_MULTI
+#include <serial.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_IOP480
+
+#define SPU_BASE 0x40000000
+
+#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
+#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
+#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
+#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
+#define spu_BRateDivh 0x10 /* Baud rate divisor high */
+#define spu_BRateDivl 0x14 /* Baud rate divisor low */
+#define spu_CtlReg 0x18 /* Control Register */
+#define spu_RxCmd 0x1c /* Rx Command Register */
+#define spu_TxCmd 0x20 /* Tx Command Register */
+#define spu_RxBuff 0x24 /* Rx data buffer */
+#define spu_TxBuff 0x24 /* Tx data buffer */
+
+/*-----------------------------------------------------------------------------+
+ | Line Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncLSRport1 0x40000000
+#define asyncLSRport1set 0x40000004
+#define asyncLSRDataReady 0x80
+#define asyncLSRFramingError 0x40
+#define asyncLSROverrunError 0x20
+#define asyncLSRParityError 0x10
+#define asyncLSRBreakInterrupt 0x08
+#define asyncLSRTxHoldEmpty 0x04
+#define asyncLSRTxShiftEmpty 0x02
+
+/*-----------------------------------------------------------------------------+
+ | Handshake Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncHSRport1 0x40000008
+#define asyncHSRport1set 0x4000000c
+#define asyncHSRDsr 0x80
+#define asyncLSRCts 0x40
+
+/*-----------------------------------------------------------------------------+
+ | Control Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncCRport1 0x40000018
+#define asyncCRNormal 0x00
+#define asyncCRLoopback 0x40
+#define asyncCRAutoEcho 0x80
+#define asyncCRDtr 0x20
+#define asyncCRRts 0x10
+#define asyncCRWordLength7 0x00
+#define asyncCRWordLength8 0x08
+#define asyncCRParityDisable 0x00
+#define asyncCRParityEnable 0x04
+#define asyncCREvenParity 0x00
+#define asyncCROddParity 0x02
+#define asyncCRStopBitsOne 0x00
+#define asyncCRStopBitsTwo 0x01
+#define asyncCRDisableDtrRts 0x00
+
+/*-----------------------------------------------------------------------------+
+ | Receiver Command Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncRCRport1 0x4000001c
+#define asyncRCRDisable 0x00
+#define asyncRCREnable 0x80
+#define asyncRCRIntDisable 0x00
+#define asyncRCRIntEnabled 0x20
+#define asyncRCRDMACh2 0x40
+#define asyncRCRDMACh3 0x60
+#define asyncRCRErrorInt 0x10
+#define asyncRCRPauseEnable 0x08
+
+/*-----------------------------------------------------------------------------+
+ | Transmitter Command Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncTCRport1 0x40000020
+#define asyncTCRDisable 0x00
+#define asyncTCREnable 0x80
+#define asyncTCRIntDisable 0x00
+#define asyncTCRIntEnabled 0x20
+#define asyncTCRDMACh2 0x40
+#define asyncTCRDMACh3 0x60
+#define asyncTCRTxEmpty 0x10
+#define asyncTCRErrorInt 0x08
+#define asyncTCRStopPause 0x04
+#define asyncTCRBreakGen 0x02
+
+/*-----------------------------------------------------------------------------+
+ | Miscellanies defines.
+ +-----------------------------------------------------------------------------*/
+#define asyncTxBufferport1 0x40000024
+#define asyncRxBufferport1 0x40000024
+#define asyncDLABLsbport1 0x40000014
+#define asyncDLABMsbport1 0x40000010
+#define asyncXOFFchar 0x13
+#define asyncXONchar 0x11
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+int serial_init (void)
+{
+ volatile char val;
+ unsigned short br_reg;
+
+ br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+ /*
+ * Init onboard UART
+ */
+ out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
+ out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
+ out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
+ out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
+ out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
+ out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+ val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
+
+ return (0);
+}
+
+void serial_setbrg (void)
+{
+ unsigned short br_reg;
+
+ br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+ out_8((u8 *)SPU_BASE + spu_BRateDivl,
+ (br_reg & 0x00ff)); /* Set baud rate divisor... */
+ out_8((u8 *)SPU_BASE + spu_BRateDivh,
+ ((br_reg & 0xff00) >> 8)); /* ... */
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ serial_putc ('\r');
+
+ /* load status from handshake register */
+ if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+
+ out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
+
+ while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
+ if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+ }
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc ()
+{
+ unsigned char status = 0;
+
+ while (1) {
+ status = in_8((u8 *)asyncLSRport1);
+ if ((status & asyncLSRDataReady) != 0x0) {
+ break;
+ }
+ if ((status & ( asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt )) != 0) {
+ (void) out_8((u8 *)asyncLSRport1,
+ asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt );
+ }
+ }
+ return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
+}
+
+int serial_tstc ()
+{
+ unsigned char status;
+
+ status = in_8((u8 *)asyncLSRport1);
+ if ((status & asyncLSRDataReady) != 0x0) {
+ return (1);
+ }
+ if ((status & ( asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt )) != 0) {
+ (void) out_8((u8 *)asyncLSRport1,
+ asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_IOP480 */
--- /dev/null
+/*
+ * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <version.h>
+
+#define CONFIG_405GP 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+ /*
+ * cache flushing routines for kgdb
+ */
+
+ .globl kgdb_flush_cache_all
+kgdb_flush_cache_all:
+ /* icache */
+ iccci r0,r0 /* iccci invalidates the entire I cache */
+ /* dcache */
+ addi r6,0,0x0000 /* clear GPR 6 */
+ addi r7,r0, 128 /* do loop for # of dcache lines */
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6, 32 /* bump to next line */
+ bdnz ..dcloop
+ blr
+
+ .globl kgdb_flush_cache_range
+kgdb_flush_cache_range:
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,L1_CACHE_BYTES
+ bdnz 2b
+ SYNC
+ blr
+
+#endif
--- /dev/null
+/*-----------------------------------------------------------------------------+
+ | This source code is dual-licensed. You may use it under the terms of the
+ | GNU General Public License version 2, or under the license below.
+ |
+ | This source code has been made available to you by IBM on an AS-IS
+ | basis. Anyone receiving this source is licensed under IBM
+ | copyrights to use it in any way he or she deems fit, including
+ | copying it, modifying it, compiling it, and redistributing it either
+ | with or without modifications. No license under IBM patents or
+ | patent applications is to be implied by the copyright license.
+ |
+ | Any user of this software should understand that IBM cannot provide
+ | technical support for this software and will not be responsible for
+ | any consequences resulting from the use of this software.
+ |
+ | Any person who transfers this source code or any derivative work
+ | must include the IBM copyright notice, this paragraph, and the
+ | preceding two paragraphs in the transferred software.
+ |
+ | COPYRIGHT I B M CORPORATION 1995
+ | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ +-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+ |
+ | File Name: miiphy.c
+ |
+ | Function: This module has utilities for accessing the MII PHY through
+ | the EMAC3 macro.
+ |
+ | Author: Mark Wisner
+ |
+ +-----------------------------------------------------------------------------*/
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <ppc4xx_enet.h>
+#include <405_mal.h>
+#include <miiphy.h>
+
+#if !defined(CONFIG_PHY_CLK_FREQ)
+#define CONFIG_PHY_CLK_FREQ 0
+#endif
+
+/***********************************************************/
+/* Dump out to the screen PHY regs */
+/***********************************************************/
+
+void miiphy_dump (char *devname, unsigned char addr)
+{
+ unsigned long i;
+ unsigned short data;
+
+ for (i = 0; i < 0x1A; i++) {
+ if (miiphy_read (devname, addr, i, &data)) {
+ printf ("read error for reg %lx\n", i);
+ return;
+ }
+ printf ("Phy reg %lx ==> %4x\n", i, data);
+
+ /* jump to the next set of regs */
+ if (i == 0x07)
+ i = 0x0f;
+
+ } /* end for loop */
+} /* end dump */
+
+/***********************************************************/
+/* (Re)start autonegotiation */
+/***********************************************************/
+int phy_setup_aneg (char *devname, unsigned char addr)
+{
+ u16 bmcr;
+
+#if defined(CONFIG_PHY_DYNAMIC_ANEG)
+ /*
+ * Set up advertisement based on capablilities reported by the PHY.
+ * This should work for both copper and fiber.
+ */
+ u16 bmsr;
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr = 0x0000;
+#endif
+
+ miiphy_read (devname, addr, PHY_BMSR, &bmsr);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (bmsr & PHY_BMSR_EXT_STAT)
+ miiphy_read (devname, addr, PHY_EXSR, &exsr);
+
+ if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
+ /* 1000BASE-X */
+ u16 anar = 0x0000;
+
+ if (exsr & PHY_EXSR_1000XF)
+ anar |= PHY_X_ANLPAR_FD;
+
+ if (exsr & PHY_EXSR_1000XH)
+ anar |= PHY_X_ANLPAR_HD;
+
+ miiphy_write (devname, addr, PHY_ANAR, anar);
+ } else
+#endif
+ {
+ u16 anar, btcr;
+
+ miiphy_read (devname, addr, PHY_ANAR, &anar);
+ anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
+ PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+
+ miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
+ btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
+
+ if (bmsr & PHY_BMSR_100T4)
+ anar |= PHY_ANLPAR_T4;
+
+ if (bmsr & PHY_BMSR_100TXF)
+ anar |= PHY_ANLPAR_TXFD;
+
+ if (bmsr & PHY_BMSR_100TXH)
+ anar |= PHY_ANLPAR_TX;
+
+ if (bmsr & PHY_BMSR_10TF)
+ anar |= PHY_ANLPAR_10FD;
+
+ if (bmsr & PHY_BMSR_10TH)
+ anar |= PHY_ANLPAR_10;
+
+ miiphy_write (devname, addr, PHY_ANAR, anar);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (exsr & PHY_EXSR_1000TF)
+ btcr |= PHY_1000BTCR_1000FD;
+
+ if (exsr & PHY_EXSR_1000TH)
+ btcr |= PHY_1000BTCR_1000HD;
+
+ miiphy_write (devname, addr, PHY_1000BTCR, btcr);
+#endif
+ }
+
+#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+ /*
+ * Set up standard advertisement
+ */
+ u16 adv;
+
+ miiphy_read (devname, addr, PHY_ANAR, &adv);
+ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
+ PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+ miiphy_write (devname, addr, PHY_ANAR, adv);
+
+ miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ adv |= (0x0300);
+ miiphy_write (devname, addr, PHY_1000BTCR, adv);
+
+#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+
+ /* Start/Restart aneg */
+ miiphy_read (devname, addr, PHY_BMCR, &bmcr);
+ bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write (devname, addr, PHY_BMCR, bmcr);
+
+ return 0;
+}
+
+/***********************************************************/
+/* read a phy reg and return the value with a rc */
+/***********************************************************/
+/* AMCC_TODO:
+ * Find out of the choice for the emac for MDIO is from the bridges,
+ * i.e. ZMII or RGMII as approporiate. If the bridges are not used
+ * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
+ * used? If so, then this routine below does not apply to the 460EX/GT.
+ *
+ * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
+ * return EMAC0 offset here
+ * vg: For 460EX/460GT if internal GPCS PHY address is specified
+ * return appropriate EMAC offset
+ */
+unsigned int miiphy_getemac_offset(u8 addr)
+{
+#if (defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
+ defined(CONFIG_NET_MULTI)
+ unsigned long zmii;
+ unsigned long eoffset;
+
+ /* Need to find out which mdi port we're using */
+ zmii = in_be32((void *)ZMII0_FER);
+
+ if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
+ /* using port 0 */
+ eoffset = 0;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
+ /* using port 1 */
+ eoffset = 0x100;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
+ /* using port 2 */
+ eoffset = 0x400;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
+ /* using port 3 */
+ eoffset = 0x600;
+
+ else {
+ /* None of the mdi ports are enabled! */
+ /* enable port 0 */
+ zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
+ out_be32((void *)ZMII0_FER, zmii);
+ eoffset = 0;
+ /* need to soft reset port 0 */
+ zmii = in_be32((void *)EMAC0_MR0);
+ zmii |= EMAC_MR0_SRST;
+ out_be32((void *)EMAC0_MR0, zmii);
+ }
+
+ return (eoffset);
+#else
+
+#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
+ unsigned long rgmii;
+ int devnum = 1;
+
+ rgmii = in_be32((void *)RGMII_FER);
+ if (rgmii & (1 << (19 - devnum)))
+ return 0x100;
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 eoffset = 0;
+
+ switch (addr) {
+#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
+ case CONFIG_GPCS_PHY1_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
+ eoffset = 0x100;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
+ case CONFIG_GPCS_PHY2_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
+ eoffset = 0x300;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
+ case CONFIG_GPCS_PHY3_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
+ eoffset = 0x400;
+ break;
+#endif
+ default:
+ eoffset = 0;
+ break;
+ }
+ return eoffset;
+#endif
+
+ return 0;
+#endif
+}
+
+static int emac_miiphy_wait(u32 emac_reg)
+{
+ u32 sta_reg;
+ int i;
+
+ /* wait for completion */
+ i = 0;
+ do {
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ if (i++ > 5) {
+ debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
+ __LINE__, sta_reg);
+ return -1;
+ }
+ udelay(10);
+ } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
+
+ return 0;
+}
+
+static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
+{
+ u32 emac_reg;
+ u32 sta_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ sta_reg = reg; /* reg address */
+
+ /* set clock (50MHz) and read flags */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX)
+#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
+#else
+ sta_reg |= cmd;
+#endif
+#else
+ sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
+#endif
+
+ /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
+ sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
+ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
+ if (cmd == EMAC_STACR_WRITE)
+ memcpy(&sta_reg, &value, 2); /* put in data */
+
+ out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+ if ((sta_reg & EMAC_STACR_PHYE) != 0)
+ return -1;
+
+ return 0;
+}
+
+int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ unsigned long sta_reg;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
+ return -1;
+
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ *value = sta_reg >> 16;
+
+ return 0;
+}
+
+/***********************************************************/
+/* write a phy reg and return the value with a rc */
+/***********************************************************/
+
+int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
+}
--- /dev/null
+/*
+ *(C) Copyright 2005-2009 Netstal Maschinen AG
+ * Bruno Hars (Bruno.Hars@netstal.com)
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+/*
+ * reginfo.c - register dump of HW-configuratin register for PPC4xx based board
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-uic.h>
+#include <ppc4xx_enet.h>
+
+enum REGISTER_TYPE {
+ IDCR1, /* Indirectly Accessed DCR via SDRAM0_CFGADDR/SDRAM0_CFGDATA */
+ IDCR2, /* Indirectly Accessed DCR via EBC0_CFGADDR/EBC0_CFGDATA */
+ IDCR3, /* Indirectly Accessed DCR via EBM0_CFGADDR/EBM0_CFGDATA */
+ IDCR4, /* Indirectly Accessed DCR via PPM0_CFGADDR/PPM0_CFGDATA */
+ IDCR5, /* Indirectly Accessed DCR via CPR0_CFGADDR/CPR0_CFGDATA */
+ IDCR6, /* Indirectly Accessed DCR via SDR0_CFGADDR/SDR0_CFGDATA */
+ MM /* Directly Accessed MMIO Register */
+};
+
+struct cpu_register {
+ char *name;
+ enum REGISTER_TYPE type;
+ u32 address;
+};
+
+/*
+ * PPC440EPx registers ordered for output
+ * name type addr size
+ * -------------------------------------------
+ */
+
+const struct cpu_register ppc4xx_reg[] = {
+ {"PB0CR", IDCR2, PB0CR},
+ {"PB0AP", IDCR2, PB0AP},
+ {"PB1CR", IDCR2, PB1CR},
+ {"PB1AP", IDCR2, PB1AP},
+ {"PB2CR", IDCR2, PB2CR},
+ {"PB2AP", IDCR2, PB2AP},
+ {"PB3CR", IDCR2, PB3CR},
+ {"PB3AP", IDCR2, PB3AP},
+
+ {"PB4CR", IDCR2, PB4CR},
+ {"PB4AP", IDCR2, PB4AP},
+#if !defined(CONFIG_405EP)
+ {"PB5CR", IDCR2, PB5CR},
+ {"PB5AP", IDCR2, PB5AP},
+ {"PB6CR", IDCR2, PB6CR},
+ {"PB6AP", IDCR2, PB6AP},
+ {"PB7CR", IDCR2, PB7CR},
+ {"PB7AP", IDCR2, PB7AP},
+#endif
+
+ {"PBEAR", IDCR2, PBEAR},
+#if defined(CONFIG_405EP) || defined (CONFIG_405GP)
+ {"PBESR0", IDCR2, PBESR0},
+ {"PBESR1", IDCR2, PBESR1},
+#endif
+ {"EBC0_CFG", IDCR2, EBC0_CFG},
+
+#ifdef CONFIG_405GP
+ {"SDRAM0_BESR0", IDCR1, SDRAM0_BESR0},
+ {"SDRAM0_BESRS0", IDCR1, SDRAM0_BESRS0},
+ {"SDRAM0_BESR1", IDCR1, SDRAM0_BESR1},
+ {"SDRAM0_BESRS1", IDCR1, SDRAM0_BESRS1},
+ {"SDRAM0_BEAR", IDCR1, SDRAM0_BEAR},
+ {"SDRAM0_CFG", IDCR1, SDRAM0_CFG},
+ {"SDRAM0_RTR", IDCR1, SDRAM0_RTR},
+ {"SDRAM0_PMIT", IDCR1, SDRAM0_PMIT},
+
+ {"SDRAM0_B0CR", IDCR1, SDRAM0_B0CR},
+ {"SDRAM0_B1CR", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_B2CR", IDCR1, SDRAM0_B2CR},
+ {"SDRAM0_B3CR", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_TR", IDCR1, SDRAM0_TR},
+ {"SDRAM0_ECCCFG", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_ECCESR", IDCR1, SDRAM0_ECCESR},
+
+
+#endif
+
+#ifdef CONFIG_440EPX
+ {"SDR0_SDSTP0", IDCR6, SDR0_SDSTP0},
+ {"SDR0_SDSTP1", IDCR6, SDR0_SDSTP1},
+ {"SDR0_SDSTP2", IDCR6, SDR0_SDSTP2},
+ {"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
+ {"SDR0_CUST0", IDCR6, SDR0_CUST0},
+ {"SDR0_CUST1", IDCR6, SDR0_CUST1},
+ {"SDR0_EBC0", IDCR6, SDR0_EBC0},
+ {"SDR0_AMP0", IDCR6, SD0_AMP0},
+ {"SDR0_AMP1", IDCR6, SD0_AMP1},
+ {"SDR0_CP440", IDCR6, SDR0_CP440},
+ {"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
+ {"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
+ {"SDR0_EMAC0RXST", IDCR6, SDR0_EMAC0RXST},
+ {"SDR0_EMAC0TXST", IDCR6, SDR0_EMAC0TXST},
+ {"SDR0_MFR", IDCR6, SDR0_MFR},
+ {"SDR0_PCI0", IDCR6, SDR0_PCI0},
+ {"SDR0_PFC0", IDCR6, SDR0_PFC0},
+ {"SDR0_PFC1", IDCR6, SDR0_PFC1},
+ {"SDR0_PFC2", IDCR6, SDR0_PFC2},
+ {"SDR0_PFC4", IDCR6, SDR0_PFC4},
+ {"SDR0_UART0", IDCR6, SDR0_UART0},
+ {"SDR0_UART1", IDCR6, SDR0_UART1},
+ {"SDR0_UART2", IDCR6, SDR0_UART2},
+ {"SDR0_UART3", IDCR6, SDR0_UART3},
+ {"DDR0_02", IDCR1, DDR0_02},
+ {"DDR0_00", IDCR1, DDR0_00},
+ {"DDR0_01", IDCR1, DDR0_01},
+ {"DDR0_03", IDCR1, DDR0_03},
+ {"DDR0_04", IDCR1, DDR0_04},
+ {"DDR0_05", IDCR1, DDR0_05},
+ {"DDR0_06", IDCR1, DDR0_06},
+ {"DDR0_07", IDCR1, DDR0_07},
+ {"DDR0_08", IDCR1, DDR0_08},
+ {"DDR0_09", IDCR1, DDR0_09},
+ {"DDR0_10", IDCR1, DDR0_10},
+ {"DDR0_11", IDCR1, DDR0_11},
+ {"DDR0_12", IDCR1, DDR0_12},
+ {"DDR0_14", IDCR1, DDR0_14},
+ {"DDR0_17", IDCR1, DDR0_17},
+ {"DDR0_18", IDCR1, DDR0_18},
+ {"DDR0_19", IDCR1, DDR0_19},
+ {"DDR0_20", IDCR1, DDR0_20},
+ {"DDR0_21", IDCR1, DDR0_21},
+ {"DDR0_22", IDCR1, DDR0_22},
+ {"DDR0_23", IDCR1, DDR0_23},
+ {"DDR0_24", IDCR1, DDR0_24},
+ {"DDR0_25", IDCR1, DDR0_25},
+ {"DDR0_26", IDCR1, DDR0_26},
+ {"DDR0_27", IDCR1, DDR0_27},
+ {"DDR0_28", IDCR1, DDR0_28},
+ {"DDR0_31", IDCR1, DDR0_31},
+ {"DDR0_32", IDCR1, DDR0_32},
+ {"DDR0_33", IDCR1, DDR0_33},
+ {"DDR0_34", IDCR1, DDR0_34},
+ {"DDR0_35", IDCR1, DDR0_35},
+ {"DDR0_36", IDCR1, DDR0_36},
+ {"DDR0_37", IDCR1, DDR0_37},
+ {"DDR0_38", IDCR1, DDR0_38},
+ {"DDR0_39", IDCR1, DDR0_39},
+ {"DDR0_40", IDCR1, DDR0_40},
+ {"DDR0_41", IDCR1, DDR0_41},
+ {"DDR0_42", IDCR1, DDR0_42},
+ {"DDR0_43", IDCR1, DDR0_43},
+ {"DDR0_44", IDCR1, DDR0_44},
+ {"CPR0_ICFG", IDCR5, CPR0_ICFG},
+ {"CPR0_MALD", IDCR5, CPR0_MALD},
+ {"CPR0_OPBD00", IDCR5, CPR0_OPBD0},
+ {"CPR0_PERD0", IDCR5, CPR0_PERD},
+ {"CPR0_PLLC0", IDCR5, CPR0_PLLC},
+ {"CPR0_PLLD0", IDCR5, CPR0_PLLD},
+ {"CPR0_PRIMAD0", IDCR5, CPR0_PRIMAD0},
+ {"CPR0_PRIMBD0", IDCR5, CPR0_PRIMBD0},
+ {"CPR0_SPCID", IDCR5, CPR0_SPCID},
+ {"SPI0_MODE", MM, SPI0_MODE},
+ {"IIC0_CLKDIV", MM, PCIL0_PMM1MA},
+ {"PCIL0_PMM0MA", MM, PCIL0_PMM0MA},
+ {"PCIL0_PMM1MA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM1LA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM1MS", MM, PCIL0_PTM1MS},
+ {"PCIL0_PTM2LA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM2MS", MM, PCIL0_PTM2MS},
+ {"ZMII0_FER", MM, ZMII0_FER},
+ {"ZMII0_SSR", MM, ZMII0_SSR},
+ {"EMAC0_IPGVR", MM, EMAC0_IPGVR},
+ {"EMAC0_MR1", MM, EMAC0_MR1},
+ {"EMAC0_PTR", MM, EMAC0_PTR},
+ {"EMAC0_RWMR", MM, EMAC0_RWMR},
+ {"EMAC0_STACR", MM, EMAC0_STACR},
+ {"EMAC0_TMR0", MM, EMAC0_TMR0},
+ {"EMAC0_TMR1", MM, EMAC0_TMR1},
+ {"EMAC0_TRTR", MM, EMAC0_TRTR},
+ {"EMAC1_MR1", MM, EMAC1_MR1},
+ {"GPIO0_OR", MM, GPIO0_OR},
+ {"GPIO1_OR", MM, GPIO1_OR},
+ {"GPIO0_TCR", MM, GPIO0_TCR},
+ {"GPIO1_TCR", MM, GPIO1_TCR},
+ {"GPIO0_ODR", MM, GPIO0_ODR},
+ {"GPIO1_ODR", MM, GPIO1_ODR},
+ {"GPIO0_OSRL", MM, GPIO0_OSRL},
+ {"GPIO0_OSRH", MM, GPIO0_OSRH},
+ {"GPIO1_OSRL", MM, GPIO1_OSRL},
+ {"GPIO1_OSRH", MM, GPIO1_OSRH},
+ {"GPIO0_TSRL", MM, GPIO0_TSRL},
+ {"GPIO0_TSRH", MM, GPIO0_TSRH},
+ {"GPIO1_TSRL", MM, GPIO1_TSRL},
+ {"GPIO1_TSRH", MM, GPIO1_TSRH},
+ {"GPIO0_IR", MM, GPIO0_IR},
+ {"GPIO1_IR", MM, GPIO1_IR},
+ {"GPIO0_ISR1L", MM, GPIO0_ISR1L},
+ {"GPIO0_ISR1H", MM, GPIO0_ISR1H},
+ {"GPIO1_ISR1L", MM, GPIO1_ISR1L},
+ {"GPIO1_ISR1H", MM, GPIO1_ISR1H},
+ {"GPIO0_ISR2L", MM, GPIO0_ISR2L},
+ {"GPIO0_ISR2H", MM, GPIO0_ISR2H},
+ {"GPIO1_ISR2L", MM, GPIO1_ISR2L},
+ {"GPIO1_ISR2H", MM, GPIO1_ISR2H},
+ {"GPIO0_ISR3L", MM, GPIO0_ISR3L},
+ {"GPIO0_ISR3H", MM, GPIO0_ISR3H},
+ {"GPIO1_ISR3L", MM, GPIO1_ISR3L},
+ {"GPIO1_ISR3H", MM, GPIO1_ISR3H},
+ {"SDR0_USB2PHY0CR", IDCR6, SDR0_USB2PHY0CR},
+ {"SDR0_USB2H0CR", IDCR6, SDR0_USB2H0CR},
+ {"SDR0_USB2D0CR", IDCR6, SDR0_USB2D0CR},
+#endif
+};
+
+/*
+ * CPU Register dump of PPC4xx HW configuration registers
+ * Output: first all DCR-registers, then in order of struct ppc4xx_reg
+ */
+#define PRINT_DCR(dcr) printf("0x%08x %-16s: 0x%08x\n", dcr,#dcr, mfdcr(dcr));
+
+void ppc4xx_reginfo(void)
+{
+ unsigned int i;
+ unsigned int n;
+ u32 value;
+ enum REGISTER_TYPE type;
+#if defined (CONFIG_405EP)
+ printf("Dump PPC405EP HW configuration registers\n\n");
+#elif CONFIG_405GP
+ printf ("Dump 405GP HW configuration registers\n\n");
+#elif CONFIG_440EPX
+ printf("Dump PPC440EPx HW configuration registers\n\n");
+#endif
+ printf("MSR: 0x%08x\n", mfmsr());
+
+ printf ("\nUniversal Interrupt Controller Regs\n");
+ PRINT_DCR(UIC0SR);
+ PRINT_DCR(UIC0ER);
+ PRINT_DCR(UIC0CR);
+ PRINT_DCR(UIC0PR);
+ PRINT_DCR(UIC0TR);
+ PRINT_DCR(UIC0MSR);
+ PRINT_DCR(UIC0VR);
+ PRINT_DCR(UIC0VCR);
+
+#if (UIC_MAX > 1)
+ PRINT_DCR(UIC2SR);
+ PRINT_DCR(UIC2ER);
+ PRINT_DCR(UIC2CR);
+ PRINT_DCR(UIC2PR);
+ PRINT_DCR(UIC2TR);
+ PRINT_DCR(UIC2MSR);
+ PRINT_DCR(UIC2VR);
+ PRINT_DCR(UIC2VCR);
+#endif
+
+#if (UIC_MAX > 2)
+ PRINT_DCR(UIC2SR);
+ PRINT_DCR(UIC2ER);
+ PRINT_DCR(UIC2CR);
+ PRINT_DCR(UIC2PR);
+ PRINT_DCR(UIC2TR);
+ PRINT_DCR(UIC2MSR);
+ PRINT_DCR(UIC2VR);
+ PRINT_DCR(UIC2VCR);
+#endif
+
+#if (UIC_MAX > 3)
+ PRINT_DCR(UIC3SR);
+ PRINT_DCR(UIC3ER);
+ PRINT_DCR(UIC3CR);
+ PRINT_DCR(UIC3PR);
+ PRINT_DCR(UIC3TR);
+ PRINT_DCR(UIC3MSR);
+ PRINT_DCR(UIC3VR);
+ PRINT_DCR(UIC3VCR);
+#endif
+
+#if defined (CONFIG_405EP) || defined (CONFIG_405GP)
+ printf ("\n\nDMA Channels\n");
+ PRINT_DCR(DMASR);
+ PRINT_DCR(DMASGC);
+ PRINT_DCR(DMAADR);
+
+ PRINT_DCR(DMACR0);
+ PRINT_DCR(DMACT0);
+ PRINT_DCR(DMADA0);
+ PRINT_DCR(DMASA0);
+ PRINT_DCR(DMASB0);
+
+ PRINT_DCR(DMACR1);
+ PRINT_DCR(DMACT1);
+ PRINT_DCR(DMADA1);
+ PRINT_DCR(DMASA1);
+ PRINT_DCR(DMASB1);
+
+ PRINT_DCR(DMACR2);
+ PRINT_DCR(DMACT2);
+ PRINT_DCR(DMADA2);
+ PRINT_DCR(DMASA2);
+ PRINT_DCR(DMASB2);
+
+ PRINT_DCR(DMACR3);
+ PRINT_DCR(DMACT3);
+ PRINT_DCR(DMADA3);
+ PRINT_DCR(DMASA3);
+ PRINT_DCR(DMASB3);
+#endif
+
+ printf ("\n\nVarious HW-Configuration registers\n");
+#if defined (CONFIG_440EPX)
+ PRINT_DCR(MAL0_CFG);
+ PRINT_DCR(CPM0_ER);
+ PRINT_DCR(CPM1_ER);
+ PRINT_DCR(PLB4A0_ACR);
+ PRINT_DCR(PLB4A1_ACR);
+ PRINT_DCR(PLB3A0_ACR);
+ PRINT_DCR(OPB2PLB40_BCTRL);
+ PRINT_DCR(P4P3BO0_CFG);
+#endif
+ n = sizeof(ppc4xx_reg) / sizeof(ppc4xx_reg[0]);
+ for (i = 0; i < n; i++) {
+ value = 0;
+ type = ppc4xx_reg[i].type;
+ switch (type) {
+ case IDCR1: /* Indirect via SDRAM0_CFGADDR/DDR0_CFGDATA */
+ mtdcr(SDRAM0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(SDRAM0_CFGDATA);
+ break;
+ case IDCR2: /* Indirect via EBC0_CFGADDR/EBC0_CFGDATA */
+ mtdcr(EBC0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(EBC0_CFGDATA);
+ break;
+ case IDCR5: /* Indirect via CPR0_CFGADDR/CPR0_CFGDATA */
+ mtdcr(CPR0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(CPR0_CFGDATA);
+ break;
+ case IDCR6: /* Indirect via SDR0_CFGADDR/SDR0_CFGDATA */
+ mtdcr(SDR0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(SDR0_CFGDATA);
+ break;
+ case MM: /* Directly Accessed MMIO Register */
+ value = in_be32((const volatile unsigned __iomem *)
+ ppc4xx_reg[i].address);
+ break;
+ default:
+ printf("\nERROR: struct entry %d: unknown register"
+ "type\n", i);
+ break;
+ }
+ printf("0x%08x %-16s: 0x%08x\n",ppc4xx_reg[i].address,
+ ppc4xx_reg[i].name, value);
+ }
+}
--- /dev/null
+/* Copyright MontaVista Software Incorporated, 2000 */
+#include <config.h>
+ .section .resetvec,"ax"
+#if defined(CONFIG_440)
+ b _start_440
+#else
+#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
+ b _start_pci
+#else
+ b _start
+#endif
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * (C) Copyright 2002-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include "sdram.h"
+#include "ecc.h"
+
+#ifdef CONFIG_SDRAM_BANK0
+
+#ifndef CONFIG_440
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+ {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
+ {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
+ {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
+ {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
+ {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#ifdef CONFIG_SYS_SDRAM_CASL
+static ulong ns2clks(ulong ns)
+{
+ ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
+
+ return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
+}
+#endif /* CONFIG_SYS_SDRAM_CASL */
+
+static ulong compute_sdtr1(ulong speed)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+ ulong tmp;
+ ulong sdtr1 = 0;
+
+ /* CASL */
+ if (CONFIG_SYS_SDRAM_CASL < 2)
+ sdtr1 |= (1 << SDRAM0_TR_CASL);
+ else
+ if (CONFIG_SYS_SDRAM_CASL > 4)
+ sdtr1 |= (3 << SDRAM0_TR_CASL);
+ else
+ sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+
+ /* PTA */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
+
+ /* CTP */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
+
+ /* LDF */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
+ else
+ sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
+
+ /* RFTA */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
+ if ((tmp >= 4) && (tmp <= 10))
+ sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
+ else
+ sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
+
+ /* RCD */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
+
+ return sdtr1;
+#else /* CONFIG_SYS_SDRAM_CASL */
+ /*
+ * If no values are configured in the board config file
+ * use the default values, which seem to be ok for most
+ * boards.
+ *
+ * REMARK:
+ * For new board ports we strongly recommend to define the
+ * correct values for the used SDRAM chips in your board
+ * config file (see PPChameleonEVB.h)
+ */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x01074015;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x0086400d;
+ }
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/* refresh is expressed in ms */
+static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+ ulong tmp;
+
+ tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
+ tmp /= 1000000;
+
+ return ((tmp & 0x00003FF8) << 16);
+#else /* CONFIG_SYS_SDRAM_CASL */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x07f00000;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x05f00000;
+ }
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/*
+ * Autodetect onboard SDRAM on 405 platforms
+ */
+phys_size_t initdram(int board_type)
+{
+ ulong speed;
+ ulong sdtr1;
+ int i;
+
+ /*
+ * Determine SDRAM speed
+ */
+ speed = get_bus_freq(0); /* parameter not used on ppc4xx */
+
+ /*
+ * sdtr1 (register SDRAM0_TR) must take into account timings listed
+ * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
+ * account actual SDRAM size. So we can set up sdtr1 according to what
+ * is specified in board configuration file while rtr dependds on SDRAM
+ * size we are assuming before detection.
+ */
+ sdtr1 = compute_sdtr1(speed);
+
+ for (i=0; i<N_MB0CF; i++) {
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(SDRAM0_CFG, 0x00000000);
+
+ /*
+ * Set MB0CF for bank 0.
+ */
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR, sdtr1);
+ mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
+
+ udelay(200);
+
+ /*
+ * Set memory controller options reg, MCOPT1.
+ * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
+ * read/prefetch.
+ */
+ mtsdram(SDRAM0_CFG, 0x80800000);
+
+ udelay(10000);
+
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ phys_size_t size = mb0cf[i].size;
+
+ /*
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
+ */
+#ifdef CONFIG_SDRAM_BANK1
+ mtsdram(SDRAM0_CFG, 0x00000000);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG, 0x80800000);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG, 0);
+ } else {
+ /*
+ * We have two identical banks, so the size
+ * is twice the bank size
+ */
+ size = 2 * size;
+ }
+#endif
+
+ /*
+ * OK, size detected -> all done
+ */
+ return size;
+ }
+ }
+
+ return 0;
+}
+
+#else /* CONFIG_440 */
+
+/*
+ * Define some default values. Those can be overwritten in the
+ * board config file.
+ */
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
+ {(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
+ {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_TR0
+#define CONFIG_SYS_SDRAM0_TR0 0x41094012
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_WDDCTR
+#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_RTR
+#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_CFG0
+#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+static void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+ int i;
+ int j, k;
+ volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
+ int first_good = -1, last_bad = 0x1ff;
+
+ unsigned long test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ /* go through all possible SDRAM0_TR1[RDCT] values */
+ for (i=0; i<=0x1ff; i++) {
+ /* set the current value for TR1 */
+ mtsdram(SDRAM0_TR1, (0x80800800 | i));
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* we have a SDRAM0_TR1[RDCT] that is part of the window */
+ if (j == NUM_TRIES) {
+ if (first_good == -1)
+ first_good = i; /* found beginning of window */
+ } else { /* bad read */
+ /* if we have not had a good read then don't care */
+ if (first_good != -1) {
+ /* first failure after a good read */
+ last_bad = i-1;
+ break;
+ }
+ }
+ }
+
+ /* return the current value for TR1 */
+ *tr1_value = (first_good + last_bad) / 2;
+}
+
+/*
+ * Autodetect onboard DDR SDRAM on 440 platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ * so this should be extended for other future boards
+ * using this routine!
+ */
+phys_size_t initdram(int board_type)
+{
+ int i;
+ int tr1_bank1;
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+ mtsdr(SDR0_SRST, 0x00000000);
+#endif
+
+ for (i=0; i<N_MB0CF; i++) {
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(SDRAM0_CFG0, 0x00000000);
+
+ /*
+ * Setup some default
+ */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
+ mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*
+ * Enable the controller, then wait for DCEN to complete
+ */
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ phys_size_t size = mb0cf[i].size;
+ /*
+ * Optimize TR1 to current hardware environment
+ */
+ sdram_tr1_set(0x00000000, &tr1_bank1);
+ mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
+
+
+ /*
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
+ */
+#ifdef CONFIG_SDRAM_BANK1
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
+ != mb0cf[i].size) {
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+ } else {
+ /*
+ * We have two identical banks, so the size
+ * is twice the bank size
+ */
+ size = 2 * size;
+ }
+#endif
+
+#ifdef CONFIG_SDRAM_ECC
+ ecc_init(0, size);
+#endif
+
+ /*
+ * OK, size detected -> all done
+ */
+ return size;
+ }
+ }
+
+ return 0; /* nothing found ! */
+}
+
+#endif /* CONFIG_440 */
+
+#endif /* CONFIG_SDRAM_BANK0 */
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDRAM_H_
+#define _SDRAM_H_
+
+#include <config.h>
+
+#define ONE_BILLION 1000000000
+
+struct sdram_conf_s {
+ unsigned long size;
+ int rows;
+ unsigned long reg;
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+/* Bitfields offsets */
+#define SDRAM0_TR_CASL (31 - 8)
+#define SDRAM0_TR_PTA (31 - 13)
+#define SDRAM0_TR_CTP (31 - 15)
+#define SDRAM0_TR_LDF (31 - 17)
+#define SDRAM0_TR_RFTA (31 - 29)
+#define SDRAM0_TR_RCD (31 - 31)
+
+#ifdef CONFIG_SYS_SDRAM_CL
+/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
+#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
+#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
+#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
+#define CONFIG_SYS_SDRAM_LDF 0
+#ifdef CONFIG_SYS_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
+#else
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
+#endif
+#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
+#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
+
+/*
+ * Some defines for the 440 DDR controller
+ */
+#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
+#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc_asm.tmpl>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ONE_BILLION 1000000000
+#ifdef DEBUG
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long pllmr;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ uint pvr = get_pvr();
+ unsigned long psr;
+ unsigned long m;
+
+ /*
+ * Read PLL Mode register
+ */
+ pllmr = mfdcr (CPC0_PLLMR);
+
+ /*
+ * Read Pin Strapping register
+ */
+ psr = mfdcr (CPC0_PSR);
+
+ /*
+ * Determine FWD_DIV.
+ */
+ sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
+ if (sysInfo->pllFbkDiv == 0) {
+ sysInfo->pllFbkDiv = 16;
+ }
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
+
+ /*
+ * Determine PCI_DIV.
+ */
+ sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
+
+ /*
+ * Check if PPC405GPr used (mask minor revision field)
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ /*
+ * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
+ */
+ sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
+
+ /*
+ * Determine factor m depending on PLL feedback clock source
+ */
+ if (!(psr & PSR_PCI_ASYNC_EN)) {
+ if (psr & PSR_NEW_MODE_EN) {
+ /*
+ * sync pci clock used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
+ } else {
+ /*
+ * sync pci clock used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
+ }
+ } else if (psr & PSR_NEW_MODE_EN) {
+ if (psr & PSR_PERCLK_SYNC_MODE_EN) {
+ /*
+ * PerClk used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * CPU clock used as feedback (new mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+ }
+ } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
+ /*
+ * PerClk used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * PLB clock used as feedback (legacy mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
+ }
+
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+ } else {
+ /*
+ * Check pllFwdDiv to see if running in bypass mode where the CPU speed
+ * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
+ * to make sure it is within the proper range.
+ * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
+ * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
+ */
+ if (sysInfo->pllFwdDiv == 1) {
+ sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
+ sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
+ } else {
+ sysInfo->freqVCOHz = ( 1000000000000LL *
+ (unsigned long long)sysInfo->pllFwdDiv *
+ (unsigned long long)sysInfo->pllFbkDiv *
+ (unsigned long long)sysInfo->pllPlbDiv
+ ) / (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
+ sysInfo->pllFbkDiv)) * 10000;
+ sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
+ }
+ }
+
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqProcessor;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ ulong val;
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB / sys_info.pllPciDiv;
+ return val;
+}
+
+
+#elif defined(CONFIG_440)
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+static u8 pll_fwdv_multi_bits[] = {
+ /* values for: 1 - 16 */
+ 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
+ 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
+};
+
+u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
+ if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+static u8 pll_fbdv_multi_bits[] = {
+ /* values for: 1 - 100 */
+ 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+ 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+ 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+ 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+ 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+ 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+ 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+ 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+ /* values for: 101 - 200 */
+ 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+ 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+ 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+ 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+ 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+ 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+ 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+ 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+ 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+ 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+ /* values for: 201 - 255 */
+ 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+ 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+ 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+ 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+ 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+ 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
+};
+
+u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
+ if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+/*
+ * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
+ * with latest EAS
+ */
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long m;
+ unsigned long plbedv0;
+
+ /* Extract configured divisors */
+ mfsdr(SDR0_SDSTP0, strp0);
+ mfsdr(SDR0_SDSTP1, strp1);
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
+ sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
+ sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
+ sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
+
+ temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
+ temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
+ plbedv0 = temp ? temp: 8;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) {
+ /* PLL internal feedback */
+ m = sysInfo->pllFbkDiv;
+ } else {
+ /* PLL PerClk feedback */
+ m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
+ sysInfo->pllExtBusDiv;
+ }
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqUART = sysInfo->freqPLB;
+
+ return;
+}
+
+#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfcpr(CPR0_PLLD, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfcpr(CPR0_OPBD0, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfcpr(CPR0_PERD, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfcpr(CPR0_PRIMBD0, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(SDR0_SDSTP0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfcpr(CPR0_PLLC, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+
+ /* Figure which timer source to use */
+ if (mfspr(SPRN_CCR1) & 0x0080) {
+ /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
+ && !defined(CONFIG_XILINX_440)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long temp;
+ unsigned long m;
+
+ /* Extract configured divisors */
+ strp0 = mfdcr( CPC0_STRP0 );
+ sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
+ sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
+ sysInfo->pllFbkDiv = temp ? temp : 16;
+ sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
+ sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
+
+ /* Calculate 'M' based on feedback source */
+ if( strp0 & PLLSYS0_EXTSL_MASK )
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+#else
+
+#if !defined(CONFIG_XILINX_440)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long temp1;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+
+#if defined(CONFIG_YUCCA)
+ unsigned long sys_freq;
+ unsigned long sys_per=0;
+ unsigned long msr;
+ unsigned long pci_clock_per;
+ unsigned long sdr_ddrpll;
+
+ /*-------------------------------------------------------------------------+
+ | Get the system clock period.
+ +-------------------------------------------------------------------------*/
+ sys_per = determine_sysper();
+
+ msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
+
+ /*-------------------------------------------------------------------------+
+ | Calculate the system clock speed from the period.
+ +-------------------------------------------------------------------------*/
+ sys_freq = (ONE_BILLION / sys_per) * 1000;
+#endif
+
+ /* Extract configured divisors */
+ mfsdr( SDR0_SDSTP0,strp0 );
+ mfsdr( SDR0_SDSTP1,strp1 );
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
+ sysInfo->pllFwdDivA = temp ? temp : 16 ;
+ temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+ temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+ prbdv0 = (strp0 >> 2) & 0x7;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
+ lfdiv = temp1 ? temp1 : 64;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
+ if (!temp)
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+#if defined(CONFIG_YUCCA)
+ sysInfo->freqVCOMhz = (m * sys_freq) ;
+#else
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+#endif
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+#if defined(CONFIG_YUCCA)
+ /* Determine PCI Clock Period */
+ pci_clock_per = determine_pci_clock_per();
+ sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+#endif
+
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+#endif
+#endif /* CONFIG_XILINX_440 */
+
+#if defined(CONFIG_YUCCA)
+unsigned long determine_sysper(void)
+{
+ unsigned int fpga_clocking_reg;
+ unsigned int master_clock_selection;
+ unsigned long master_clock_per = 0;
+ unsigned long fb_div_selection;
+ unsigned int vco_div_reg_value;
+ unsigned long vco_div_selection;
+ unsigned long sys_per = 0;
+ int extClkVal;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 0 and reg 1 to get FPGA reg information
+ +-------------------------------------------------------------------------*/
+ fpga_clocking_reg = in16(FPGA_REG16);
+
+
+ /* Determine Master Clock Source Selection */
+ master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
+
+ switch(master_clock_selection) {
+ case FPGA_REG16_MASTER_CLK_66_66:
+ master_clock_per = PERIOD_66_66MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_50:
+ master_clock_per = PERIOD_50_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_33_33:
+ master_clock_per = PERIOD_33_33MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_25:
+ master_clock_per = PERIOD_25_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_EXT:
+ if ((extClkVal==EXTCLK_33_33)
+ && (extClkVal==EXTCLK_50)
+ && (extClkVal==EXTCLK_66_66)
+ && (extClkVal==EXTCLK_83)) {
+ /* calculate master clock period from external clock value */
+ master_clock_per=(ONE_BILLION/extClkVal) * 1000;
+ } else {
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ break;
+ default:
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ break;
+ }
+
+ /* Determine FB divisors values */
+ if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_6;
+ else
+ fb_div_selection = FPGA_FB_DIV_12;
+ } else {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_10;
+ else
+ fb_div_selection = FPGA_FB_DIV_20;
+ }
+
+ /* Determine VCO divisors values */
+ vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
+
+ switch(vco_div_reg_value) {
+ case FPGA_REG16_VCO_DIV_4:
+ vco_div_selection = FPGA_VCO_DIV_4;
+ break;
+ case FPGA_REG16_VCO_DIV_6:
+ vco_div_selection = FPGA_VCO_DIV_6;
+ break;
+ case FPGA_REG16_VCO_DIV_8:
+ vco_div_selection = FPGA_VCO_DIV_8;
+ break;
+ case FPGA_REG16_VCO_DIV_10:
+ default:
+ vco_div_selection = FPGA_VCO_DIV_10;
+ break;
+ }
+
+ if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
+ switch(master_clock_per) {
+ case PERIOD_25_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_33_33MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_50_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_50_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_75_00MHZ;
+ }
+ break;
+ case PERIOD_66_66MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_66_66MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_100_00MHZ;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sys_per == 0) {
+ /* Other combinations are not supported */
+ DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ } else {
+ /* calcul system clock without cheking */
+ /* if engineering option clock no check is selected */
+ /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
+ sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
+ }
+
+ return(sys_per);
+}
+
+/*-------------------------------------------------------------------------+
+| determine_pci_clock_per.
++-------------------------------------------------------------------------*/
+unsigned long determine_pci_clock_per(void)
+{
+ unsigned long pci_clock_selection, pci_period;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 6 to get PCI 0 FPGA reg information
+ +-------------------------------------------------------------------------*/
+ pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
+
+
+ pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
+
+ switch (pci_clock_selection) {
+ case FPGA_REG16_PCI0_CLK_133_33:
+ pci_period = PERIOD_133_33MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_100:
+ pci_period = PERIOD_100_00MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_66_66:
+ pci_period = PERIOD_66_66MHZ;
+ break;
+ default:
+ pci_period = PERIOD_33_33MHZ;;
+ break;
+ }
+
+ return(pci_period);
+}
+#endif
+
+#elif defined(CONFIG_XILINX_405)
+extern void get_sys_info (sys_info_t * sysInfo);
+extern ulong get_PCI_freq (void);
+
+#elif defined(CONFIG_AP1000)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ sysInfo->freqProcessor = 240 * 1000 * 1000;
+ sysInfo->freqPLB = 80 * 1000 * 1000;
+ sysInfo->freqPCI = 33 * 1000 * 1000;
+}
+
+#elif defined(CONFIG_405)
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ sysInfo->freqVCOMhz=3125000;
+ sysInfo->freqProcessor=12*1000*1000;
+ sysInfo->freqPLB=50*1000*1000;
+ sysInfo->freqPCI=66*1000*1000;
+}
+
+#elif defined(CONFIG_405EP)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long pllmr0;
+ unsigned long pllmr1;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ unsigned long m;
+ unsigned long pllmr0_ccdv;
+
+ /*
+ * Read PLL Mode registers
+ */
+ pllmr0 = mfdcr (CPC0_PLLMR0);
+ pllmr1 = mfdcr (CPC0_PLLMR1);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B (should be equal to A)
+ */
+ sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
+ if (sysInfo->pllFbkDiv == 0)
+ sysInfo->pllFbkDiv = 16;
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
+
+ /*
+ * Determine PCI_DIV.
+ */
+ sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
+
+ /*
+ * Determine the M factor
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
+ if (pllmr1 & PLLMR1_SSCS_MASK) {
+ /*
+ * This is true if FWDVA == FWDVB:
+ * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
+ * / pllmr0_ccdv;
+ */
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
+ / sysInfo->pllFwdDiv / pllmr0_ccdv;
+ } else {
+ sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
+ }
+
+ /*
+ * Determine PLB clock frequency
+ */
+ sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+
+ sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+
+ sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ ulong val;
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB / sys_info.pllPciDiv;
+ return val;
+}
+
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long cpr_plld;
+ unsigned long cpr_pllc;
+ unsigned long cpr_primad;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+ unsigned long primad_cpudv;
+ unsigned long m;
+ unsigned long plloutb;
+
+ /*
+ * Read PLL Mode registers
+ */
+ mfcpr(CPR0_PLLD, cpr_plld);
+ mfcpr(CPR0_PLLC, cpr_pllc);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B
+ */
+ sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+ if (sysInfo->pllFwdDivB == 0)
+ sysInfo->pllFwdDivB = 8;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (sysInfo->pllFbkDiv == 0)
+ sysInfo->pllFbkDiv = 256;
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ mfcpr(CPC0_PRIMAD, cpr_primad);
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+ if (sysInfo->pllPlbDiv == 0)
+ sysInfo->pllPlbDiv = 16;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+ if (sysInfo->pllExtBusDiv == 0)
+ sysInfo->pllExtBusDiv = 16;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+ if (sysInfo->pllOpbDiv == 0)
+ sysInfo->pllOpbDiv = 16;
+
+ /*
+ * Determine the M factor
+ */
+ if (cpr_pllc & PLLC_SRC_MASK)
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+ if (primad_cpudv == 0)
+ primad_cpudv = 16;
+
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / primad_cpudv;
+
+ /*
+ * Determine PLB clock frequency
+ */
+ sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
+
+ sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+ sysInfo->pllOpbDiv;
+
+ sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+ sysInfo->pllExtBusDiv;
+
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
+ sysInfo->pllFwdDivB);
+ sysInfo->freqUART = plloutb;
+}
+
+#elif defined(CONFIG_405EX)
+
+/*
+ * TODO: We need to get the CPR registers and calculate these values correctly!!!!
+ * We need the specs!!!!
+ */
+static unsigned char get_fbdv(unsigned char index)
+{
+ unsigned char ret = 0;
+ /* This is table should be 256 bytes.
+ * Only take first 52 values.
+ */
+ unsigned char fbdv_tb[] = {
+ 0x00, 0xff, 0x7f, 0xfd,
+ 0x7a, 0xf5, 0x6a, 0xd5,
+ 0x2a, 0xd4, 0x29, 0xd3,
+ 0x26, 0xcc, 0x19, 0xb3,
+ 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba,
+ 0x74, 0xe9, 0x52, 0xa5,
+ 0x4b, 0x96, 0x2c, 0xd8,
+ 0x31, 0xe3, 0x46, 0x8d,
+ 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed,
+ 0x5a, 0xb5, 0x6b, 0xd6,
+ 0x2d, 0xdb, 0x36, 0xec,
+
+ };
+
+ if ((index & 0x7f) == 0)
+ return 1;
+ while (ret < sizeof (fbdv_tb)) {
+ if (fbdv_tb[ret] == index)
+ break;
+ ret++;
+ }
+ ret++;
+
+ return ret;
+}
+
+#define PLL_FBK_PLL_LOCAL 0
+#define PLL_FBK_CPU 1
+#define PLL_FBK_PERCLK 5
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ unsigned long m = 1;
+ unsigned int tmp;
+ unsigned char fwdva[16] = {
+ 1, 2, 14, 9, 4, 11, 16, 13,
+ 12, 5, 6, 15, 10, 7, 8, 3,
+ };
+ unsigned char sel, cpudv0, plb2xDiv;
+
+ mfcpr(CPR0_PLLD, tmp);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
+
+ /*
+ * Determine PLBDV0
+ */
+ sysInfo->pllPlbDiv = 2;
+
+ /*
+ * Determine PERDV0
+ */
+ mfcpr(CPR0_PERD, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
+
+ /*
+ * Determine OPBDV0
+ */
+ mfcpr(CPR0_OPBD0, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
+
+ /* Determine PLB2XDV0 */
+ mfcpr(CPR0_PLBD, tmp);
+ tmp = (tmp >> 16) & 0x07;
+ plb2xDiv = (tmp == 0) ? 8 : tmp;
+
+ /* Determine CPUDV0 */
+ mfcpr(CPR0_CPUD, tmp);
+ tmp = (tmp >> 24) & 0x07;
+ cpudv0 = (tmp == 0) ? 8 : tmp;
+
+ /* Determine SEL(5:7) in CPR0_PLLC */
+ mfcpr(CPR0_PLLC, tmp);
+ sel = (tmp >> 24) & 0x07;
+
+ /*
+ * Determine the M factor
+ * PLL local: M = FBDV
+ * CPU clock: M = FBDV * FWDVA * CPUDV0
+ * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
+ *
+ */
+ switch (sel) {
+ case PLL_FBK_CPU:
+ m = sysInfo->pllFwdDiv * cpudv0;
+ break;
+ case PLL_FBK_PERCLK:
+ m = sysInfo->pllFwdDiv * plb2xDiv * 2
+ * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
+ break;
+ case PLL_FBK_PLL_LOCAL:
+ break;
+ default:
+ printf("%s unknown m\n", __FUNCTION__);
+ return;
+
+ }
+ m *= sysInfo->pllFbkDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
+
+ /*
+ * Determine PLB clock frequency, ddr1x should be the same
+ */
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+#endif
+
+int get_clocks (void)
+{
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+ gd->cpu_clk = sys_info.freqProcessor;
+ gd->bus_clk = sys_info.freqPLB;
+
+#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
+
+#ifdef CONFIG_IOP480
+ gd->cpu_clk = 66000000;
+ gd->bus_clk = 66000000;
+#endif
+ return (0);
+}
+
+
+/********************************************
+ * get_bus_freq
+ * return PLB bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ ulong val;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB;
+
+#elif defined(CONFIG_IOP480)
+
+ val = 66;
+
+#else
+# error get_bus_freq() not implemented
+#endif
+
+ return val;
+}
+
+#if !defined(CONFIG_IOP480)
+ulong get_OPB_freq (void)
+{
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+
+ return sys_info.freqOPB;
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*------------------------------------------------------------------------------+
+ * This source code is dual-licensed. You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-------------------------------------------------------------------------------
+ */
+
+/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfffffffc and the code is executed
+ * from flash/rom.
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memorymap.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <config.h>
+#include <ppc4xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/ppc4xx-isram.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
+# define PBxAP PB1AP
+# define PBxCR PB0CR
+# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
+# define PBxAP PB1AP
+# define PBxCR PB1CR
+# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
+# define PBxAP PB2AP
+# define PBxCR PB2CR
+# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
+# define PBxAP PB3AP
+# define PBxCR PB3CR
+# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
+# define PBxAP PB4AP
+# define PBxCR PB4CR
+# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
+# define PBxAP PB5AP
+# define PBxCR PB5CR
+# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
+# define PBxAP PB6AP
+# define PBxCR PB6CR
+# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
+# define PBxAP PB7AP
+# define PBxCR PB7CR
+# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
+# endif
+# endif
+# ifndef PBxAP_VAL
+# define PBxAP_VAL 0
+# endif
+# ifndef PBxCR_VAL
+# define PBxCR_VAL 0
+# endif
+/*
+ * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
+ * used as temporary stack pointer for the primordial stack
+ */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
+# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(2) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_NONDELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED)
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
+# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
+ EBC_BXCR_BS_64MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
+# ifndef CONFIG_SYS_INIT_RAM_PATTERN
+# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
+# endif
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
+
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
+#endif
+
+/*
+ * Unless otherwise overriden, enable two 128MB cachable instruction regions
+ * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
+ * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
+ */
+#if !defined(CONFIG_SYS_FLASH_BASE)
+/* If not already defined, set it to the "last" 128MByte region */
+# define CONFIG_SYS_FLASH_BASE 0xf8000000
+#endif
+#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
+# define CONFIG_SYS_ICACHE_SACR_VALUE \
+ (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
+#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
+
+#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
+# define CONFIG_SYS_DCACHE_SACR_VALUE \
+ (0x00000000)
+#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
+
+#define function_prolog(func_name) .text; \
+ .align 2; \
+ .globl func_name; \
+ func_name:
+#define function_epilog(func_name) .type func_name,@function; \
+ .size func_name,.-func_name
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
+
+
+ .extern ext_bus_cntlr_init
+#ifdef CONFIG_NAND_U_BOOT
+ .extern reconfig_tlb0
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+#if !defined(CONFIG_NAND_SPL)
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+#endif /* CONFIG_NAND_SPL */
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * NAND U-Boot image is started from offset 0
+ */
+ .text
+#if defined(CONFIG_440)
+ bl reconfig_tlb0
+#endif
+ GET_GOT
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT)
+ /*
+ * 4xx RAM-booting U-Boot image is started from offset 0
+ */
+ .text
+ bl _start_440
+#endif
+
+/*
+ * 440 Startup -- on reset only the top 4k of the effective
+ * address space is mapped in by an entry in the instruction
+ * and data shadow TLB. The .bootpg section is located in the
+ * top 4k & does only what's necessary to map in the the rest
+ * of the boot rom. Once the boot rom is mapped in we can
+ * proceed with normal startup.
+ *
+ * NOTE: CS0 only covers the top 2MB of the effective address
+ * space after reset.
+ */
+
+#if defined(CONFIG_440)
+#if !defined(CONFIG_NAND_SPL)
+ .section .bootpg,"ax"
+#endif
+ .globl _start_440
+
+/**************************************************************************/
+_start_440:
+ /*--------------------------------------------------------------------+
+ | 440EPX BUP Change - Hardware team request
+ +--------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ sync
+ nop
+ nop
+#endif
+ /*----------------------------------------------------------------+
+ | Core bug fix. Clear the esr
+ +-----------------------------------------------------------------*/
+ li r0,0
+ mtspr SPRN_ESR,r0
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ iccci r0,r0 /* NOTE: operands not used for 440 */
+ dccci r0,r0 /* NOTE: operands not used for 440 */
+ sync
+ li r0,0
+ mtspr SPRN_SRR0,r0
+ mtspr SPRN_SRR1,r0
+ mtspr SPRN_CSRR0,r0
+ mtspr SPRN_CSRR1,r0
+ /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440) && !defined(CONFIG_440GP)
+ mtspr SPRN_MCSRR0,r0
+ mtspr SPRN_MCSRR1,r0
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* CCR0 init */
+ /*----------------------------------------------------------------*/
+ /* Disable store gathering & broadcast, guarantee inst/data
+ * cache block touch, force load/store alignment
+ * (see errata 1.12: 440_33)
+ */
+ lis r1,0x0030 /* store gathering & broadcast disable */
+ ori r1,r1,0x6000 /* cache touch */
+ mtspr SPRN_CCR0,r1
+
+ /*----------------------------------------------------------------*/
+ /* Initialize debug */
+ /*----------------------------------------------------------------*/
+ mfspr r1,SPRN_DBCR0
+ andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
+ bne skip_debug_init /* if set, don't clear debug register */
+ mtspr SPRN_DBCR0,r0
+ mtspr SPRN_DBCR1,r0
+ mtspr SPRN_DBCR2,r0
+ mtspr SPRN_IAC1,r0
+ mtspr SPRN_IAC2,r0
+ mtspr SPRN_IAC3,r0
+ mtspr SPRN_DAC1,r0
+ mtspr SPRN_DAC2,r0
+ mtspr SPRN_DVC1,r0
+ mtspr SPRN_DVC2,r0
+
+ mfspr r1,SPRN_DBSR
+ mtspr SPRN_DBSR,r1 /* Clear all valid bits */
+skip_debug_init:
+
+#if defined (CONFIG_440SPE)
+ /*----------------------------------------------------------------+
+ | Initialize Core Configuration Reg1.
+ | a. ICDPEI: Record even parity. Normal operation.
+ | b. ICTPEI: Record even parity. Normal operation.
+ | c. DCTPEI: Record even parity. Normal operation.
+ | d. DCDPEI: Record even parity. Normal operation.
+ | e. DCUPEI: Record even parity. Normal operation.
+ | f. DCMPEI: Record even parity. Normal operation.
+ | g. FCOM: Normal operation
+ | h. MMUPEI: Record even parity. Normal operation.
+ | i. FFF: Flush only as much data as necessary.
+ | j. TCS: Timebase increments from CPU clock.
+ +-----------------------------------------------------------------*/
+ li r0,0
+ mtspr SPRN_CCR1, r0
+
+ /*----------------------------------------------------------------+
+ | Reset the timebase.
+ | The previous write to CCR1 sets the timebase source.
+ +-----------------------------------------------------------------*/
+ mtspr SPRN_TBWL, r0
+ mtspr SPRN_TBWU, r0
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* Setup interrupt vectors */
+ /*----------------------------------------------------------------*/
+ mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
+ li r1,0x0100
+ mtspr SPRN_IVOR0,r1 /* Critical input */
+ li r1,0x0200
+ mtspr SPRN_IVOR1,r1 /* Machine check */
+ li r1,0x0300
+ mtspr SPRN_IVOR2,r1 /* Data storage */
+ li r1,0x0400
+ mtspr SPRN_IVOR3,r1 /* Instruction storage */
+ li r1,0x0500
+ mtspr SPRN_IVOR4,r1 /* External interrupt */
+ li r1,0x0600
+ mtspr SPRN_IVOR5,r1 /* Alignment */
+ li r1,0x0700
+ mtspr SPRN_IVOR6,r1 /* Program check */
+ li r1,0x0800
+ mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
+ li r1,0x0c00
+ mtspr SPRN_IVOR8,r1 /* System call */
+ li r1,0x0a00
+ mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
+ li r1,0x0900
+ mtspr SPRN_IVOR10,r1 /* Decrementer */
+ li r1,0x1300
+ mtspr SPRN_IVOR13,r1 /* Data TLB error */
+ li r1,0x1400
+ mtspr SPRN_IVOR14,r1 /* Instr TLB error */
+ li r1,0x2000
+ mtspr SPRN_IVOR15,r1 /* Debug */
+
+ /*----------------------------------------------------------------*/
+ /* Configure cache regions */
+ /*----------------------------------------------------------------*/
+ mtspr SPRN_INV0,r0
+ mtspr SPRN_INV1,r0
+ mtspr SPRN_INV2,r0
+ mtspr SPRN_INV3,r0
+ mtspr SPRN_DNV0,r0
+ mtspr SPRN_DNV1,r0
+ mtspr SPRN_DNV2,r0
+ mtspr SPRN_DNV3,r0
+ mtspr SPRN_ITV0,r0
+ mtspr SPRN_ITV1,r0
+ mtspr SPRN_ITV2,r0
+ mtspr SPRN_ITV3,r0
+ mtspr SPRN_DTV0,r0
+ mtspr SPRN_DTV1,r0
+ mtspr SPRN_DTV2,r0
+ mtspr SPRN_DTV3,r0
+
+ /*----------------------------------------------------------------*/
+ /* Cache victim limits */
+ /*----------------------------------------------------------------*/
+ /* floors 0, ceiling max to use the entire cache -- nothing locked
+ */
+ lis r1,0x0001
+ ori r1,r1,0xf800
+ mtspr SPRN_IVLIM,r1
+ mtspr SPRN_DVLIM,r1
+
+ /*----------------------------------------------------------------+
+ |Initialize MMUCR[STID] = 0.
+ +-----------------------------------------------------------------*/
+ mfspr r0,SPRN_MMUCR
+ addis r1,0,0xFFFF
+ ori r1,r1,0xFF00
+ and r0,r0,r1
+ mtspr SPRN_MMUCR,r0
+
+ /*----------------------------------------------------------------*/
+ /* Clear all TLB entries -- TID = 0, TS = 0 */
+ /*----------------------------------------------------------------*/
+ addis r0,0,0x0000
+#ifdef CONFIG_SYS_RAMBOOT
+ li r4,0 /* Start with TLB #0 */
+#else
+ li r4,1 /* Start with TLB #1 */
+#endif
+ li r1,64 /* 64 TLB entries */
+ sub r1,r1,r4 /* calculate last TLB # */
+ mtctr r1
+rsttlb:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
+ rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
+ beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
+#endif
+ tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
+ tlbwe r0,r4,1
+ tlbwe r0,r4,2
+tlbnxt: addi r4,r4,1 /* Next TLB */
+ bdnz rsttlb
+
+ /*----------------------------------------------------------------*/
+ /* TLB entry setup -- step thru tlbtab */
+ /*----------------------------------------------------------------*/
+#if defined(CONFIG_440SPE_REVA)
+ /*----------------------------------------------------------------*/
+ /* We have different TLB tables for revA and rev B of 440SPe */
+ /*----------------------------------------------------------------*/
+ mfspr r1, PVR
+ lis r0,0x5342
+ ori r0,r0,0x1891
+ cmpw r7,r1,r0
+ bne r7,..revA
+ bl tlbtabB
+ b ..goon
+..revA:
+ bl tlbtabA
+..goon:
+#else
+ bl tlbtab /* Get tlbtab pointer */
+#endif
+ mr r5,r0
+ li r1,0x003f /* 64 TLB entries max */
+ mtctr r1
+ li r4,0 /* TLB # */
+
+ addi r5,r5,-4
+1:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 */
+ rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
+ bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
+#endif
+ lwzu r0,4(r5)
+ cmpwi r0,0
+ beq 2f /* 0 marks end */
+ lwzu r1,4(r5)
+ lwzu r2,4(r5)
+ tlbwe r0,r4,0 /* TLB Word 0 */
+ tlbwe r1,r4,1 /* TLB Word 1 */
+ tlbwe r2,r4,2 /* TLB Word 2 */
+tlbnx2: addi r4,r4,1 /* Next TLB */
+ bdnz 1b
+
+ /*----------------------------------------------------------------*/
+ /* Continue from 'normal' start */
+ /*----------------------------------------------------------------*/
+2:
+ bl 3f
+ b _start
+
+3: li r0,0
+ mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
+ mflr r1
+ mtspr SPRN_SRR0,r1
+ rfi
+#endif /* CONFIG_440 */
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+#ifndef CONFIG_NAND_SPL
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+ CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
+
+#ifdef CONFIG_440
+/* Machine check */
+ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#else
+ CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#endif /* CONFIG_440 */
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+ STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
+ STD_EXCEPTION(0xa00, APU, UnknownException)
+#endif
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
+#else
+ STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+#endif
+ CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+ . = _START_OFFSET
+#endif
+ .globl _start
+_start:
+
+/*****************************************************************************/
+#if defined(CONFIG_440)
+
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ li r0,0x0000
+ lis r1,0xffff
+ mtspr SPRN_DEC,r0 /* prevent dec exceptions */
+ mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
+ mtspr SPRN_TBWU,r0
+ mtspr SPRN_TSR,r1 /* clear all timer exception status */
+ mtspr SPRN_TCR,r0 /* disable all */
+ mtspr SPRN_ESR,r0 /* clear exception syndrome register */
+ mtxer r0 /* clear integer exception register */
+
+ /*----------------------------------------------------------------*/
+ /* Debug setup -- some (not very good) ice's need an event*/
+ /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
+ /* value you need in this case 0x8cff 0000 should do the trick */
+ /*----------------------------------------------------------------*/
+#if defined(CONFIG_SYS_INIT_DBCR)
+ lis r1,0xffff
+ ori r1,r1,0xffff
+ mtspr SPRN_DBSR,r1 /* Clear all status bits */
+ lis r0,CONFIG_SYS_INIT_DBCR@h
+ ori r0,r0,CONFIG_SYS_INIT_DBCR@l
+ mtspr SPRN_DBCR0,r0
+ isync
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* Setup the internal SRAM */
+ /*----------------------------------------------------------------*/
+ li r0,0
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+ /* Clear Dcache to use as RAM */
+ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+ addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
+ ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ran
+ addi r5,r5,0x0001
+..d_ran:
+ mtctr r5
+..d_ag:
+ dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag
+
+ /*
+ * Lock the init-ram/stack in d-cache, so that other regions
+ * may use d-cache as well
+ * Note, that this current implementation locks exactly 4k
+ * of d-cache, so please make sure that you don't define a
+ * bigger init-ram area. Take a look at the lwmon5 440EPx
+ * implementation as a reference.
+ */
+ msync
+ isync
+ /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
+ lis r1,0x0201
+ ori r1,r1,0xf808
+ mtspr SPRN_DVLIM,r1
+ lis r1,0x0808
+ ori r1,r1,0x0808
+ mtspr SPRN_DNV0,r1
+ mtspr SPRN_DNV1,r1
+ mtspr SPRN_DNV2,r1
+ mtspr SPRN_DNV3,r1
+ mtspr SPRN_DTV0,r1
+ mtspr SPRN_DTV1,r1
+ mtspr SPRN_DTV2,r1
+ mtspr SPRN_DTV3,r1
+ msync
+ isync
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
+
+ /* 440EP & 440GR are only 440er PPC's without internal SRAM */
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+ /* not all PPC's have internal SRAM usable as L2-cache */
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460SX)
+ mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1, 0x0000
+ ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
+ mtdcr L2_CACHE_CFG,r1
+#endif
+
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,ISRAM0_DPC
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr ISRAM0_DPC,r1
+ mfdcr r1,ISRAM0_PMEG
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr ISRAM0_PMEG,r1
+
+ lis r1,0x8000 /* BAS = 8000_0000 */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+ ori r1,r1,0x0980 /* first 64k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x8001
+ ori r1,r1,0x0980 /* second 64k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x8002
+ ori r1,r1, 0x0980 /* third 64k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x8003
+ ori r1,r1, 0x0980 /* fourth 64k */
+ mtdcr ISRAM0_SB3CR,r1
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1,0x0000 /* BAS = X_0000_0000 */
+ ori r1,r1,0x0984 /* first 64k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x0001
+ ori r1,r1,0x0984 /* second 64k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0984 /* third 64k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0984 /* fourth 64k */
+ mtdcr ISRAM0_SB3CR,r1
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,ISRAM1_DPC
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr ISRAM1_DPC,r1
+ mfdcr r1,ISRAM1_PMEG
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr ISRAM1_PMEG,r1
+
+ lis r1,0x0004 /* BAS = 4_0004_0000 */
+ ori r1,r1,0x0984 /* 64k */
+ mtdcr ISRAM1_SB0CR,r1
+#endif
+#elif defined(CONFIG_460SX)
+ lis r1,0x0000 /* BAS = 0000_0000 */
+ ori r1,r1,0x0B84 /* first 128k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x0001
+ ori r1,r1,0x0B84 /* second 128k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0B84 /* third 128k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0B84 /* fourth 128k */
+ mtdcr ISRAM0_SB3CR,r1
+#elif defined(CONFIG_440GP)
+ ori r1,r1,0x0380 /* 8k rw */
+ mtdcr ISRAM0_SB0CR,r1
+ mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
+#endif
+#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
+
+ /*----------------------------------------------------------------*/
+ /* Setup the stack in internal SRAM */
+ /*----------------------------------------------------------------*/
+ lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0, RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot_common /* will not return */
+#else
+ GET_GOT
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
+
+#endif /* CONFIG_440 */
+
+/*****************************************************************************/
+#ifdef CONFIG_IOP480
+ /*----------------------------------------------------------------------- */
+ /* Set up some machine state registers. */
+ /*----------------------------------------------------------------------- */
+ addi r0,r0,0x0000 /* initialize r0 to zero */
+ mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
+ mttcr r0 /* timer control register */
+ mtexier r0 /* disable all interrupts */
+ addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
+ ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+ mtexisr r4 /* clear all pending interrupts */
+ addis r4,r0,0x8000
+ mtexier r4 /* enable critical exceptions */
+ addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
+ ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
+ mtiocr r4 /* since bit not used) & DRC to latch */
+ /* data bus on rising edge of CAS */
+ /*----------------------------------------------------------------------- */
+ /* Clear XER. */
+ /*----------------------------------------------------------------------- */
+ mtxer r0
+ /*----------------------------------------------------------------------- */
+ /* Invalidate i-cache and d-cache TAG arrays. */
+ /*----------------------------------------------------------------------- */
+ addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
+ addi r4,0,1024 /* 1/4 of I-cache */
+..cloop:
+ iccci 0,r3
+ iccci r4,r3
+ dccci 0,r3
+ addic. r3,r3,-16 /* move back one cache line */
+ bne ..cloop /* loop back to do rest until r3 = 0 */
+
+ /* */
+ /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
+ /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
+ /* */
+
+ /* first copy IOP480 register base address into r3 */
+ addis r3,0,0x5000 /* IOP480 register base address hi */
+/* ori r3,r3,0x0000 / IOP480 register base address lo */
+
+#ifdef CONFIG_ADCIOP
+ /* use r4 as the working variable */
+ /* turn on CS3 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+#ifdef CONFIG_DASA_SIM
+ /* use r4 as the working variable */
+ /* turn on MA17 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+ /* turn on MA16..13 (LCS0BRD.12 = 0) */
+ lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+ andi. r4,r4,0xefff /* make bit 12 = 0 */
+ stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /* last thing, set local init status done bit (DEVINIT.31) */
+ lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+ oris r4,r4,0x8000 /* make bit 31 = 1 */
+ stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+
+ /* clear all pending interrupts and disable all interrupts */
+ li r4,-1 /* set p1 to 0xffffffff */
+ stw r4,0x1b0(r3) /* clear all pending interrupts */
+ stw r4,0x1b8(r3) /* clear all pending interrupts */
+ li r4,0 /* set r4 to 0 */
+ stw r4,0x1b4(r3) /* disable all interrupts */
+ stw r4,0x1bc(r3) /* disable all interrupts */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /* Set-up icache cacheability. */
+ lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
+ mticcr r1
+ isync
+
+ /* Set-up dcache cacheability. */
+ lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
+ mtdccr r1
+
+ addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ bl board_init_f /* run first part of init code (from Flash) */
+
+#endif /* CONFIG_IOP480 */
+
+/*****************************************************************************/
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405)
+ /*----------------------------------------------------------------------- */
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------------- */
+ addi r4,r0,0x0000
+#if !defined(CONFIG_405EX)
+ mtspr SPRN_SGR,r4
+#else
+ /*
+ * On 405EX, completely clearing the SGR leads to PPC hangup
+ * upon PCIe configuration access. The PCIe memory regions
+ * need to be guarded!
+ */
+ lis r3,0x0000
+ ori r3,r3,0x7FFC
+ mtspr SPRN_SGR,r3
+#endif
+ mtspr SPRN_DCWR,r4
+ mtesr r4 /* clear Exception Syndrome Reg */
+ mttcr r4 /* clear Timer Control Reg */
+ mtxer r4 /* clear Fixed-Point Exception Reg */
+ mtevpr r4 /* clear Exception Vector Prefix Reg */
+ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
+ /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+
+ /* Invalidate the i- and d-caches. */
+ bl invalidate_icache
+ bl invalidate_dcache
+
+ /* Set-up icache cacheability. */
+ lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
+ mticcr r4
+ isync
+
+ /* Set-up dcache cacheability. */
+ lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
+ mtdccr r4
+
+#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
+ && !defined (CONFIG_XILINX_405)
+ /*----------------------------------------------------------------------- */
+ /* Tune the speed and size for flash CS0 */
+ /*----------------------------------------------------------------------- */
+ bl ext_bus_cntlr_init
+#endif
+
+#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
+ /*
+ * For boards that don't have OCM and can't use the data cache
+ * for their primordial stack, setup stack here directly after the
+ * SDRAM is initialized in ext_bus_cntlr_init.
+ */
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
+
+#if defined(CONFIG_405EP)
+ /*----------------------------------------------------------------------- */
+ /* DMA Status, clear to come up clean */
+ /*----------------------------------------------------------------------- */
+ addis r3,r0, 0xFFFF /* Clear all existing DMA status */
+ ori r3,r3, 0xFFFF
+ mtdcr DMASR, r3
+
+ bl ppc405ep_init /* do ppc405ep specific init */
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
+#if defined(CONFIG_405EZ)
+ /********************************************************************
+ * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
+ *******************************************************************/
+ /*
+ * We can map the OCM on the PLB3, so map it at
+ * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
+ */
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
+ mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
+ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
+ mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
+ isync
+
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
+ mtdcr OCM0_DSRC1, r3 /* Set Data Side */
+ mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
+ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
+ mtdcr OCM0_DSRC2, r3 /* Set Data Side */
+ mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
+ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
+ mtdcr OCM0_DISDPC,r3
+
+ isync
+#else /* CONFIG_405EZ */
+ /********************************************************************
+ * Setup OCM - On Chip Memory
+ *******************************************************************/
+ /* Setup OCM */
+ lis r0, 0x7FFF
+ ori r0, r0, 0xFFFF
+ mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
+ mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
+ and r3, r3, r0 /* disable data-side IRAM */
+ and r4, r4, r0 /* disable data-side IRAM */
+ mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
+ mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
+ isync
+
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ mtdcr OCM0_DSARC, r3
+ addis r4, 0, 0xC000 /* OCM data area enabled */
+ mtdcr OCM0_DSCNTL, r4
+ isync
+#endif /* CONFIG_405EZ */
+#endif
+
+ /*----------------------------------------------------------------------- */
+ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
+ /*----------------------------------------------------------------------- */
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+ li r4, PBxAP
+ mtdcr EBC0_CFGADDR, r4
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
+ mtdcr EBC0_CFGDATA, r4
+
+ addi r4, 0, PBxCR
+ mtdcr EBC0_CFGADDR, r4
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
+ mtdcr EBC0_CFGDATA, r4
+
+ /*
+ * Enable the data cache for the 128MB storage access control region
+ * at CONFIG_SYS_INIT_RAM_ADDR.
+ */
+ mfdccr r4
+ oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
+ mtdccr r4
+
+ /*
+ * Preallocate data cache lines to be used to avoid a subsequent
+ * cache miss and an ensuing machine check exception when exceptions
+ * are enabled.
+ */
+ li r0, 0
+
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+
+ /*
+ * Convert the size, in bytes, to the number of cache lines/blocks
+ * to preallocate.
+ */
+ clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
+ srwi r5, r4, L1_CACHE_SHIFT
+ beq ..load_counter
+ addi r5, r5, 0x0001
+..load_counter:
+ mtctr r5
+
+ /* Preallocate the computed number of cache blocks. */
+..alloc_dcache_block:
+ dcba r0, r3
+ addi r3, r3, L1_CACHE_BYTES
+ bdnz ..alloc_dcache_block
+ sync
+
+ /*
+ * Load the initial stack pointer and data area and convert the size,
+ * in bytes, to the number of words to initialize to a known value.
+ */
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
+
+ lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
+ ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
+ mtctr r4
+
+ lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
+
+..stackloop:
+ stwu r4, -4(r2)
+ bdnz ..stackloop
+
+ /*
+ * Make room for stack frame header and clear final stack frame so
+ * that stack backtraces terminate cleanly.
+ */
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+
+#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
+ (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
+ /*
+ * Stack in OCM.
+ */
+
+ /* Set up Stack at top of OCM */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
+
+ /* Set up a zeroized stack frame so that backtrace works right */
+ li r0, 0
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
+
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot_common /* will not return */
+#else
+ GET_GOT /* initialize GOT access */
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ /* NEVER RETURNS! */
+ bl board_init_f /* run first part of init code (from Flash) */
+#endif /* CONFIG_NAND_SPL */
+
+#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
+ /*----------------------------------------------------------------------- */
+
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+crit_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_CSRR0,r2
+ mtspr SPRN_CSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfci
+
+#ifdef CONFIG_440
+mck_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_MCSRR0,r2
+ mtspr SPRN_MCSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfmci
+#endif /* CONFIG_440 */
+
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = Relocated stack pointer
+ * r4 = Relocated global data pointer
+ * r5 = Relocated text pointer
+ */
+ .globl relocate_code
+relocate_code:
+#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
+ /*
+ * We need to flush the initial global data (gd_t) before the dcache
+ * will be invalidated.
+ */
+
+ /* Save registers */
+ mr r9, r3
+ mr r10, r4
+ mr r11, r5
+
+ /* Flush initial global data range */
+ mr r3, r4
+ addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
+ bl flush_dcache_range
+
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+ /*
+ * Undo the earlier data cache set-up for the primordial stack and
+ * data area. First, invalidate the data cache and then disable data
+ * cacheability for that area. Finally, restore the EBC values, if
+ * any.
+ */
+
+ /* Invalidate the primordial stack and data area in cache */
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+ add r4, r4, r3
+
+ bl invalidate_dcache_range
+
+ /* Disable cacheability for the region */
+ mfdccr r3
+ lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
+ and r3, r3, r4
+ mtdccr r3
+
+ /* Restore the EBC parameters */
+ li r3, PBxAP
+ mtdcr EBC0_CFGADDR, r3
+ lis r3, PBxAP_VAL@h
+ ori r3, r3, PBxAP_VAL@l
+ mtdcr EBC0_CFGDATA, r3
+
+ li r3, PBxCR
+ mtdcr EBC0_CFGADDR, r3
+ lis r3, PBxCR_VAL@h
+ ori r3, r3, PBxCR_VAL@l
+ mtdcr EBC0_CFGDATA, r3
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
+
+ /* Restore registers */
+ mr r3, r9
+ mr r4, r10
+ mr r5, r11
+#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+ /*
+ * Unlock the previously locked d-cache
+ */
+ msync
+ isync
+ /* set TFLOOR/NFLOOR to 0 again */
+ lis r6,0x0001
+ ori r6,r6,0xf800
+ mtspr SPRN_DVLIM,r6
+ lis r6,0x0000
+ ori r6,r6,0x0000
+ mtspr SPRN_DNV0,r6
+ mtspr SPRN_DNV1,r6
+ mtspr SPRN_DNV2,r6
+ mtspr SPRN_DNV3,r6
+ mtspr SPRN_DTV0,r6
+ mtspr SPRN_DTV1,r6
+ mtspr SPRN_DTV2,r6
+ mtspr SPRN_DTV3,r6
+ msync
+ isync
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
+ * to speed up the boot process. Now this cache needs to be disabled.
+ */
+ iccci 0,0 /* Invalidate inst cache */
+ dccci 0,0 /* Invalidate data cache, now no longer our stack */
+ sync
+ isync
+
+ /* Clear all potential pending exceptions */
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
+#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
+ addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
+#else
+ addi r1,r0,0x0000 /* Default TLB entry is #0 */
+#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
+ tlbre r0,r1,0x0002 /* Read contents */
+ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
+ tlbwe r0,r1,0x0002 /* Save it out */
+ sync
+ isync
+#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Init Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, L1_CACHE_BYTES /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + _START_OFFSET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 7f
+
+ li r0, 0
+
+ andi. r5, r4, 3
+ beq 6f
+ sub r4, r4, r5
+ mtctr r5
+ mr r5, r4
+5: stb r0, 0(r5)
+ addi r5, r5, 1
+ bdnz 5b
+6:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 6b
+
+7:
+ mr r3, r9 /* Init Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start_of_vectors)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + _START_OFFSET
+ li r8, Alignment - _start + _START_OFFSET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + _START_OFFSET
+ bl trap_reloc
+
+#ifdef CONFIG_440
+ li r7, .L_FPUnavailable - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_Decrementer - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_APU - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBError - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBError - _start + _START_OFFSET
+ bl trap_reloc
+#else /* CONFIG_440 */
+ li r7, .L_PIT - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+#endif /* CONFIG_440 */
+
+ li r7, .L_DebugBreakpoint - _start + _START_OFFSET
+ bl trap_reloc
+
+#if !defined(CONFIG_440)
+ addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
+ mtmsr r7 /* change MSR */
+#else
+ bl __440_msr_set
+ b __440_msr_continue
+
+__440_msr_set:
+ addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
+ mtspr SPRN_SRR1,r7
+ mflr r7
+ mtspr SPRN_SRR0,r7
+ rfi
+__440_msr_continue:
+#endif
+
+ mtlr r4 /* restore link register */
+ blr
+
+#if defined(CONFIG_440)
+/*----------------------------------------------------------------------------+
+| dcbz_area.
++----------------------------------------------------------------------------*/
+ function_prolog(dcbz_area)
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
+..d_ra2:mtctr r5
+..d_ag2:dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag2
+ sync
+ blr
+ function_epilog(dcbz_area)
+#endif /* CONFIG_440 */
+#endif /* CONFIG_NAND_SPL */
+
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/**************************************************************************/
+/* PPC405EP specific stuff */
+/**************************************************************************/
+#ifdef CONFIG_405EP
+ppc405ep_init:
+
+#ifdef CONFIG_BUBINGA
+ /*
+ * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
+ * function) to support FPGA and NVRAM accesses below.
+ */
+
+ lis r3,GPIO0_OSRH@h /* config GPIO output select */
+ ori r3,r3,GPIO0_OSRH@l
+ lis r4,CONFIG_SYS_GPIO0_OSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
+ stw r4,0(r3)
+ lis r3,GPIO0_OSRL@h
+ ori r3,r3,GPIO0_OSRL@l
+ lis r4,CONFIG_SYS_GPIO0_OSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_ISR1H@h /* config GPIO input select */
+ ori r3,r3,GPIO0_ISR1H@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1H@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
+ stw r4,0(r3)
+ lis r3,GPIO0_ISR1L@h
+ ori r3,r3,GPIO0_ISR1L@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1L@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
+ ori r3,r3,GPIO0_TSRH@l
+ lis r4,CONFIG_SYS_GPIO0_TSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
+ stw r4,0(r3)
+ lis r3,GPIO0_TSRL@h
+ ori r3,r3,GPIO0_TSRL@l
+ lis r4,CONFIG_SYS_GPIO0_TSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
+ ori r3,r3,GPIO0_TCR@l
+ lis r4,CONFIG_SYS_GPIO0_TCR@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
+ stw r4,0(r3)
+
+ li r3,PB1AP /* program EBC bank 1 for RTC access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB1CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
+ mtdcr EBC0_CFGDATA,r3
+
+ li r3,PB1AP /* program EBC bank 1 for RTC access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB1CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
+ mtdcr EBC0_CFGDATA,r3
+
+ li r3,PB4AP /* program EBC bank 4 for FPGA access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB4AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB4CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB4CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
+ mtdcr EBC0_CFGDATA,r3
+#endif
+
+ /*
+ !-----------------------------------------------------------------------
+ ! Check to see if chip is in bypass mode.
+ ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
+ ! CPU reset Otherwise, skip this step and keep going.
+ ! Note: Running BIOS in bypass mode is not supported since PLB speed
+ ! will not be fast enough for the SDRAM (min 66MHz)
+ !-----------------------------------------------------------------------
+ */
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r4,0x1
+
+ beq pll_done /* if SSCS =b'1' then PLL has */
+ /* already been set */
+ /* and CPU has been reset */
+ /* so skip to next section */
+
+#ifdef CONFIG_BUBINGA
+ /*
+ !-----------------------------------------------------------------------
+ ! Read NVRAM to get value to write in PLLMR.
+ ! If value has not been correctly saved, write default value
+ ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
+ ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
+ !
+ ! WARNING: This code assumes the first three words in the nvram_t
+ ! structure in openbios.h. Changing the beginning of
+ ! the structure will break this code.
+ !
+ !-----------------------------------------------------------------------
+ */
+ addis r3,0,NVRAM_BASE@h
+ addi r3,r3,NVRAM_BASE@l
+
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY1@h
+ addi r5,r5,NVRVFY1@l
+ cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
+ bne ..no_pllset
+ addi r3,r3,4
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY2@h
+ addi r5,r5,NVRVFY2@l
+ cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
+ bne ..no_pllset
+ addi r3,r3,8 /* Skip over conf_size */
+ lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
+ lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
+ rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r5,1 /* See if PLL is locked */
+ beq pll_write
+..no_pllset:
+#endif /* CONFIG_BUBINGA */
+
+#ifdef CONFIG_TAIHU
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ addis r5,0,CPLD_REG0_ADDR@h
+ ori r5,r5,CPLD_REG0_ADDR@l
+ andi. r5, r5, 0x10
+ bne _pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
+ addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
+ ori r3,r3,PLLMR0_DEFAULT@l /* */
+ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
+ ori r4,r4,PLLMR1_DEFAULT@l /* */
+
+#ifdef CONFIG_TAIHU
+ b 1f
+_pci_66mhz:
+ addis r3,0,PLLMR0_DEFAULT_PCI66@h
+ ori r3,r3,PLLMR0_DEFAULT_PCI66@l
+ addis r4,0,PLLMR1_DEFAULT_PCI66@h
+ ori r4,r4,PLLMR1_DEFAULT_PCI66@l
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
+ b pll_write /* Write the CPC0_PLLMR with new value */
+
+pll_done:
+ /*
+ !-----------------------------------------------------------------------
+ ! Clear Soft Reset Register
+ ! This is needed to enable PCI if not booting from serial EPROM
+ !-----------------------------------------------------------------------
+ */
+ addi r3, 0, 0x0
+ mtdcr CPC0_SRR, r3
+
+ addis r3,0,0x0010
+ mtctr r3
+pci_wait:
+ bdnz pci_wait
+
+ blr /* return to main code */
+
+/*
+!-----------------------------------------------------------------------------
+! Function: pll_write
+! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
+! That is:
+! 1. Pll is first disabled (de-activated by putting in bypass mode)
+! 2. PLL is reset
+! 3. Clock dividers are set while PLL is held in reset and bypassed
+! 4. PLL Reset is cleared
+! 5. Wait 100us for PLL to lock
+! 6. A core reset is performed
+! Input: r3 = Value to write to CPC0_PLLMR0
+! Input: r4 = Value to write to CPC0_PLLMR1
+! Output r3 = none
+!-----------------------------------------------------------------------------
+*/
+ .globl pll_write
+pll_write:
+ mfdcr r5, CPC0_UCR
+ andis. r5,r5,0xFFFF
+ ori r5,r5,0x0101 /* Stop the UART clocks */
+ mtdcr CPC0_UCR,r5 /* Before changing PLL */
+
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
+ mtdcr CPC0_PLLMR1,r5
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
+ rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
+ rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ /*
+ ! Wait min of 100us for PLL to lock.
+ ! See CMOS 27E databook for more info.
+ ! At 200MHz, that means waiting 20,000 instructions
+ */
+ addi r3,0,20000 /* 2000 = 0x4e20 */
+ mtctr r3
+pll_wait:
+ bdnz pll_wait
+
+ oris r5,r5,0x8000 /* Enable PLL */
+ mtdcr CPC0_PLLMR1,r5 /* Engage */
+
+ /*
+ * Reset CPU to guarantee timings are OK
+ * Not sure if this is needed...
+ */
+ addis r3,0,0x1000
+ mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
+ /* execution will continue from the poweron */
+ /* vector of 0xfffffffc */
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_440)
+/*----------------------------------------------------------------------------+
+| mttlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb3)
+ TLBWE(4,3,2)
+ blr
+ function_epilog(mttlb3)
+
+/*----------------------------------------------------------------------------+
+| mftlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb3)
+ TLBRE(3,3,2)
+ blr
+ function_epilog(mftlb3)
+
+/*----------------------------------------------------------------------------+
+| mttlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb2)
+ TLBWE(4,3,1)
+ blr
+ function_epilog(mttlb2)
+
+/*----------------------------------------------------------------------------+
+| mftlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb2)
+ TLBRE(3,3,1)
+ blr
+ function_epilog(mftlb2)
+
+/*----------------------------------------------------------------------------+
+| mttlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb1)
+ TLBWE(4,3,0)
+ blr
+ function_epilog(mttlb1)
+
+/*----------------------------------------------------------------------------+
+| mftlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb1)
+ TLBRE(3,3,0)
+ blr
+ function_epilog(mftlb1)
+#endif /* CONFIG_440 */
+
+#if defined(CONFIG_NAND_SPL)
+/*
+ * void nand_boot_relocate(dst, src, bytes)
+ *
+ * r3 = Destination address to copy code to (in SDRAM)
+ * r4 = Source address to copy code from
+ * r5 = size to copy in bytes
+ */
+nand_boot_relocate:
+ mr r6,r3
+ mr r7,r4
+ mflr r8
+
+ /*
+ * Copy SPL from icache into SDRAM
+ */
+ subi r3,r3,4
+ subi r4,r4,4
+ srwi r5,r5,2
+ mtctr r5
+..spl_loop:
+ lwzu r0,4(r4)
+ stwu r0,4(r3)
+ bdnz ..spl_loop
+
+ /*
+ * Calculate "corrected" link register, so that we "continue"
+ * in execution in destination range
+ */
+ sub r3,r7,r6 /* r3 = src - dst */
+ sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
+ mtlr r8
+ blr
+
+nand_boot_common:
+ /*
+ * First initialize SDRAM. It has to be available *before* calling
+ * nand_boot().
+ */
+ lis r3,CONFIG_SYS_SDRAM_BASE@h
+ ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
+ bl initdram
+
+ /*
+ * Now copy the 4k SPL code into SDRAM and continue execution
+ * from there.
+ */
+ lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
+ lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
+ ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
+ lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
+ ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
+ bl nand_boot_relocate
+
+ /*
+ * We're running from SDRAM now!!!
+ *
+ * It is necessary for 4xx systems to relocate from running at
+ * the original location (0xfffffxxx) to somewhere else (SDRAM
+ * preferably). This is because CS0 needs to be reconfigured for
+ * NAND access. And we can't reconfigure this CS when currently
+ * "running" from it.
+ */
+
+ /*
+ * Finally call nand_boot() to load main NAND U-Boot image from
+ * NAND and jump to it.
+ */
+ bl nand_boot /* will not return */
+#endif /* CONFIG_NAND_SPL */
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_440)
+
+#include <ppc440.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+typedef struct region {
+ u64 base;
+ u32 size;
+ u32 tlb_word2_i_value;
+} region_t;
+
+void remove_tlb(u32 vaddr, u32 size)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+ /*
+ * Found a TLB in the range.
+ * Disable it by writing 0 to tlb0 word.
+ */
+ mttlb1(i, 0);
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+/*
+ * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
+ * This function is used to either turn cache on or off in a specific
+ * memory area.
+ */
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_word2_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
+ ((tlb_vaddr < (vaddr + size - 1)) &&
+ ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
+ /*
+ * Found a TLB in the range.
+ * Change cache attribute in tlb2 word.
+ */
+ tlb_word2_value =
+ TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /*
+ * Now either flush or invalidate the dcache
+ */
+ if (tlb_word2_i_value)
+ flush_dcache();
+ else
+ invalidate_dcache();
+
+ mttlb3(i, tlb_word2_value);
+ asm("iccci 0,0");
+ }
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+static int add_tlb_entry(u64 phys_addr,
+ u32 virt_addr,
+ u32 tlb_word0_size_value,
+ u32 tlb_word2_i_value)
+{
+ int i;
+ unsigned long tlb_word0_value;
+ unsigned long tlb_word1_value;
+ unsigned long tlb_word2_value;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
+ break;
+ }
+ if (i >= PPC4XX_TLB_SIZE)
+ return -1;
+
+ /* Second, create the TLB entry */
+ tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
+ TLB_WORD0_TS_0 | tlb_word0_size_value;
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
+ TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
+ tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /* Wait for all memory accesses to complete */
+ sync();
+
+ /* Third, add the TLB entries */
+ mttlb1(i, tlb_word0_value);
+ mttlb2(i, tlb_word1_value);
+ mttlb3(i, tlb_word2_value);
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+
+ return 0;
+}
+
+static void program_tlb_addr(u64 phys_addr,
+ u32 virt_addr,
+ u32 mem_size,
+ u32 tlb_word2_i_value)
+{
+ int rc;
+ int tlb_i;
+
+ tlb_i = tlb_word2_i_value;
+ while (mem_size != 0) {
+ rc = 0;
+ /* Add the TLB entries in to map the region. */
+ if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256MB_SIZE)) {
+ /* Add a 256MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+ mem_size -= TLB_256MB_SIZE;
+ phys_addr += TLB_256MB_SIZE;
+ virt_addr += TLB_256MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16MB_SIZE)) {
+ /* Add a 16MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+ mem_size -= TLB_16MB_SIZE;
+ phys_addr += TLB_16MB_SIZE;
+ virt_addr += TLB_16MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1MB_SIZE)) {
+ /* Add a 1MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+ mem_size -= TLB_1MB_SIZE;
+ phys_addr += TLB_1MB_SIZE;
+ virt_addr += TLB_1MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256KB_SIZE)) {
+ /* Add a 256KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+ mem_size -= TLB_256KB_SIZE;
+ phys_addr += TLB_256KB_SIZE;
+ virt_addr += TLB_256KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_64KB_SIZE)) {
+ /* Add a 64KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+ mem_size -= TLB_64KB_SIZE;
+ phys_addr += TLB_64KB_SIZE;
+ virt_addr += TLB_64KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16KB_SIZE)) {
+ /* Add a 16KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+ mem_size -= TLB_16KB_SIZE;
+ phys_addr += TLB_16KB_SIZE;
+ virt_addr += TLB_16KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_4KB_SIZE)) {
+ /* Add a 4KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+ mem_size -= TLB_4KB_SIZE;
+ phys_addr += TLB_4KB_SIZE;
+ virt_addr += TLB_4KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1KB_SIZE)) {
+ /* Add a 1KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+ mem_size -= TLB_1KB_SIZE;
+ phys_addr += TLB_1KB_SIZE;
+ virt_addr += TLB_1KB_SIZE;
+ }
+ } else {
+ printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
+ phys_addr);
+ }
+
+ if (rc != 0)
+ printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
+ phys_addr);
+ }
+
+ return;
+}
+
+/*
+ * Program one (or multiple) TLB entries for one memory region
+ *
+ * Common usage for boards with SDRAM DIMM modules to dynamically
+ * configure the TLB's for the SDRAM
+ */
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
+{
+ region_t region_array;
+
+ region_array.base = phys_addr;
+ region_array.size = size;
+ region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
+
+ /* Call the routine to add in the tlb entries for the memory regions */
+ program_tlb_addr(region_array.base, virt_addr, region_array.size,
+ region_array.tlb_word2_i_value);
+
+ return;
+}
+
+#endif /* CONFIG_440 */
--- /dev/null
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+ */
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+
+static __inline__ void set_tsr(unsigned long val)
+{
+#if defined(CONFIG_440)
+ asm volatile("mtspr 0x150, %0" : : "r" (val));
+#else
+ asm volatile("mttsr %0" : : "r" (val));
+#endif
+}
+
+static __inline__ unsigned long get_esr(void)
+{
+ unsigned long val;
+
+#if defined(CONFIG_440)
+ asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
+#else
+ asm volatile("mfesr %0" : "=r" (val) :);
+#endif
+ return val;
+}
+
+#define ESR_MCI 0x80000000
+#define ESR_PIL 0x08000000
+#define ESR_PPR 0x04000000
+#define ESR_PTR 0x02000000
+#define ESR_DST 0x00800000
+#define ESR_DIZ 0x00400000
+#define ESR_U0F 0x00008000
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception");
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup, val;
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ u32 value2;
+ int corr_ecc = 0;
+ int uncorr_ecc = 0;
+#endif
+
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ val = mfspr(MCSR);
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine Check Exception.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ", regs);
+
+ val = get_esr();
+
+#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
+ if (val& ESR_IMCP) {
+ printf("Instruction");
+ mtspr(ESR, val & ~ESR_IMCP);
+ } else {
+ printf("Data");
+ }
+ printf(" machine check.\n");
+
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
+ if (val& ESR_IMCP){
+ printf("Instruction Synchronous Machine Check exception\n");
+ mtspr(SPRN_ESR, val & ~ESR_IMCP);
+ } else {
+ val = mfspr(MCSR);
+ if (val & MCSR_IB)
+ printf("Instruction Read PLB Error\n");
+#if defined(CONFIG_440)
+ if (val & MCSR_DRB)
+ printf("Data Read PLB Error\n");
+ if (val & MCSR_DWB)
+ printf("Data Write PLB Error\n");
+#else
+ if (val & MCSR_DB)
+ printf("Data PLB Error\n");
+#endif
+ if (val & MCSR_TLBP)
+ printf("TLB Parity Error\n");
+ if (val & MCSR_ICP){
+ /*flush_instruction_cache(); */
+ printf("I-Cache Parity Error\n");
+ }
+ if (val & MCSR_DCSP)
+ printf("D-Cache Search Parity Error\n");
+ if (val & MCSR_DCFP)
+ printf("D-Cache Flush Parity Error\n");
+ if (val & MCSR_IMPE)
+ printf("Machine Check exception is imprecise\n");
+
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
+ }
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ mfsdram(DDR0_00, val) ;
+ printf("DDR0: DDR0_00 %lx\n", val);
+ val = (val >> 16) & 0xff;
+ if (val & 0x80)
+ printf("DDR0: At least one interrupt active\n");
+ if (val & 0x40)
+ printf("DDR0: DRAM initialization complete.\n");
+ if (val & 0x20) {
+ printf("DDR0: Multiple uncorrectable ECC events.\n");
+ uncorr_ecc = 1;
+ }
+ if (val & 0x10) {
+ printf("DDR0: Single uncorrectable ECC event.\n");
+ uncorr_ecc = 1;
+ }
+ if (val & 0x08) {
+ printf("DDR0: Multiple correctable ECC events.\n");
+ corr_ecc = 1;
+ }
+ if (val & 0x04) {
+ printf("DDR0: Single correctable ECC event.\n");
+ corr_ecc = 1;
+ }
+ if (val & 0x02)
+ printf("Multiple accesses outside the defined"
+ " physical memory space detected\n");
+ if (val & 0x01)
+ printf("DDR0: Single access outside the defined"
+ " physical memory space detected.\n");
+
+ mfsdram(DDR0_01, val);
+ val = (val >> 8) & 0x7;
+ switch (val ) {
+ case 0:
+ printf("DDR0: Write Out-of-Range command\n");
+ break;
+ case 1:
+ printf("DDR0: Read Out-of-Range command\n");
+ break;
+ case 2:
+ printf("DDR0: Masked write Out-of-Range command\n");
+ break;
+ case 4:
+ printf("DDR0: Wrap write Out-of-Range command\n");
+ break;
+ case 5:
+ printf("DDR0: Wrap read Out-of-Range command\n");
+ break;
+ default:
+ mfsdram(DDR0_01, value2);
+ printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
+ }
+ mfsdram(DDR0_23, val);
+ if (((val >> 16) & 0xff) && corr_ecc)
+ printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
+ (val >> 16) & 0xff);
+ mfsdram(DDR0_23, val);
+ if (((val >> 8) & 0xff) && uncorr_ecc)
+ printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
+ (val >> 8) & 0xff);
+ mfsdram(DDR0_33, val);
+ if (val)
+ printf("DDR0: Address of command that caused an "
+ "Out-of-Range interrupt %lx\n", val);
+ mfsdram(DDR0_34, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
+ mfsdram(DDR0_35, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
+ mfsdram(DDR0_36, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_37, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_38, val);
+ if (val && corr_ecc)
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
+ mfsdram(DDR0_39, val);
+ if (val && corr_ecc)
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
+ mfsdram(DDR0_40, val);
+ if (val && corr_ecc)
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_41, val);
+ if (val && corr_ecc)
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
+#endif /* CONFIG_440EPX */
+#endif /* CONFIG_440 */
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ long esr_val;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+
+ esr_val = get_esr();
+ if( esr_val & ESR_PIL )
+ printf( "** Illegal Instruction **\n" );
+ else if( esr_val & ESR_PPR )
+ printf( "** Privileged Instruction **\n" );
+ else if( esr_val & ESR_PTR )
+ printf( "** Trap Instruction **\n" );
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+DecrementerPITException(struct pt_regs *regs)
+{
+ /*
+ * Reset PIT interrupt
+ */
+ set_tsr(0x08000000);
+
+ /*
+ * Call timer_interrupt routine in interrupts.c
+ */
+ timer_interrupt(NULL);
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "config.h" /* CONFIG_BOARDDIR */
+
+#ifndef RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ *(.got1)
+ } :text
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } :text
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+#ifdef CONFIG_440
+ .bootpg RESET_VECTOR_ADDRESS - 0xffc :
+ {
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
+
+ /*
+ * PPC440 board need a board specific object with the
+ * TLB definitions. This needs to get included right after
+ * start.o, since the first shadow TLB only covers 4k
+ * of address space.
+ */
+ CONFIG_BOARDDIR/init.o (.bootpg)
+ } :text = 0xffff
+#endif
+
+ .resetvec RESET_VECTOR_ADDRESS :
+ {
+ *(.resetvec)
+ } :text = 0xffff
+
+ . = RESET_VECTOR_ADDRESS + 0x4;
+
+ /*
+ * Make sure that the bss segment isn't linked at 0x0, otherwise its
+ * address won't be updated during relocation fixups. Note that
+ * this is a temporary fix. Code to dynamically the fixup the bss
+ * location will be added in the future. When the bss relocation
+ * fixup code is present this workaround should be removed.
+ */
+#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
+ . |= 0x10;
+#endif
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ } :bss
+
+ . = ALIGN(4);
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+
+#if (UIC_MAX > 3)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
+ UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
+#elif (UIC_MAX > 2)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#elif (UIC_MAX > 1)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
+#else
+#define UICB0_ALL 0
+#endif
+
+u32 get_dcr(u16);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+#if (UIC_MAX > 1)
+ /* Install the UIC1 handlers */
+ irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 2)
+ irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 3)
+ irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
+#endif
+}
+
+/* Handler for UIC interrupt */
+static void uic_interrupt(u32 uic_base, int vec_base)
+{
+ u32 uic_msr;
+ u32 msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = get_dcr(uic_base + UIC_MSR);
+ msr_shift = uic_msr;
+ vec = vec_base;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000)
+ interrupt_run_handler(vec);
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+ u32 uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = mfdcr(UIC0MSR);
+
+#if (UIC_MAX > 1)
+ if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
+ uic_interrupt(UIC1_DCR_BASE, 32);
+#endif
+
+#if (UIC_MAX > 2)
+ if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
+ uic_interrupt(UIC2_DCR_BASE, 64);
+#endif
+
+#if (UIC_MAX > 3)
+ if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
+ uic_interrupt(UIC3_DCR_BASE, 96);
+#endif
+
+ mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic_interrupt(UIC0_DCR_BASE, 0);
+
+ return;
+}
+
+void pic_irq_ack(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0SR, UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1SR, UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2SR, UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3SR, UIC_MASK(vec));
+}
+
+/*
+ * Install and free a interrupt handler.
+ */
+void pic_irq_enable(unsigned int vec)
+{
+
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
+
+ debug("Install interrupt vector %d\n", vec);
+}
+
+void pic_irq_disable(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
+}
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
+
+#ifdef CONFIG_4xx_DCACHE
+#include <asm/mmu.h>
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#include "usbdev.h"
+
+int usb_cpu_init(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* disable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+#endif
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
+ *
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#include "usbdev.h"
+
+#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+ (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define readl(a) (*((volatile u32 *)(a)))
+#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+#define ohci_cpu_to_le16(x) (x)
+#define ohci_cpu_to_le32(x) (x)
+#else
+#define ohci_cpu_to_le16(x) swap_16(x)
+#define ohci_cpu_to_le32(x) swap_32(x)
+#endif
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = readl (&hc->regs->roothub.register); \
+ if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = readl (&hc->regs->roothub.register); \
+ temp; })
+
+static u32 roothub_a (struct ohci *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+ { return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+ { return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+ int i;
+ int last;
+ struct td * td;
+
+ last = urb->length - 1;
+ if (last >= 0) {
+ for (i = 0; i <= last; i++) {
+ td = urb->td[i];
+ if (td) {
+ td->usb_dev = NULL;
+ urb->td[i] = NULL;
+ }
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, char * str, int small)
+{
+ urb_priv_t * purb = &urb_priv;
+
+ dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+ str,
+ sohci_get_current_frame_number (dev),
+ usb_pipedevice (pipe),
+ usb_pipeendpoint (pipe),
+ usb_pipeout (pipe)? 'O': 'I',
+ usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+ (usb_pipecontrol (pipe)? "CTRL": "BULK"),
+ purb->actual_length,
+ transfer_len, dev->status);
+#ifdef OHCI_VERBOSE_DEBUG
+ if (!small) {
+ int i, len;
+
+ if (usb_pipecontrol (pipe)) {
+ printf (__FILE__ ": cmd(8):");
+ for (i = 0; i < 8 ; i++)
+ printf (" %02x", ((__u8 *) setup) [i]);
+ printf ("\n");
+ }
+ if (transfer_len > 0 && buffer) {
+ printf (__FILE__ ": data(%d/%d):",
+ purb->actual_length,
+ transfer_len);
+ len = usb_pipeout (pipe)?
+ transfer_len: purb->actual_length;
+ for (i = 0; i < 16 && i < len; i++)
+ printf (" %02x", ((__u8 *) buffer) [i]);
+ printf ("%s\n", i < len? "...": "");
+ }
+ }
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+ int i, j;
+ __u32 * ed_p;
+ for (i= 0; i < 32; i++) {
+ j = 5;
+ ed_p = &(ohci->hcca->int_table [i]);
+ if (*ed_p == 0)
+ continue;
+ printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+ while (*ed_p != 0 && j--) {
+ ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
+ printf (" ed: %4x;", ed->hwINFO);
+ ed_p = &ed->hwNextED;
+ }
+ printf ("\n");
+ }
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+ dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+ label,
+ mask,
+ (mask & OHCI_INTR_MIE) ? " MIE" : "",
+ (mask & OHCI_INTR_OC) ? " OC" : "",
+ (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+ (mask & OHCI_INTR_FNO) ? " FNO" : "",
+ (mask & OHCI_INTR_UE) ? " UE" : "",
+ (mask & OHCI_INTR_RD) ? " RD" : "",
+ (mask & OHCI_INTR_SF) ? " SF" : "",
+ (mask & OHCI_INTR_WDH) ? " WDH" : "",
+ (mask & OHCI_INTR_SO) ? " SO" : ""
+ );
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+ ed_t *edp = (ed_t *)value;
+
+ if (value) {
+ dbg ("%s %08x", label, value);
+ dbg ("%08x", edp->hwINFO);
+ dbg ("%08x", edp->hwTailP);
+ dbg ("%08x", edp->hwHeadP);
+ dbg ("%08x", edp->hwNextED);
+ }
+}
+
+static char * hcfs2string (int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET: return "reset";
+ case OHCI_USB_RESUME: return "resume";
+ case OHCI_USB_OPER: return "operational";
+ case OHCI_USB_SUSPEND: return "suspend";
+ }
+ return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+ struct ohci_regs *regs = controller->regs;
+ __u32 temp;
+
+ temp = readl (®s->revision) & 0xff;
+ if (temp != 0x10)
+ dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+ temp = readl (®s->control);
+ dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+ (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+ (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+ (temp & OHCI_CTRL_IR) ? " IR" : "",
+ hcfs2string (temp & OHCI_CTRL_HCFS),
+ (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+ (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+ (temp & OHCI_CTRL_IE) ? " IE" : "",
+ (temp & OHCI_CTRL_PLE) ? " PLE" : "",
+ temp & OHCI_CTRL_CBSR
+ );
+
+ temp = readl (®s->cmdstatus);
+ dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+ (temp & OHCI_SOC) >> 16,
+ (temp & OHCI_OCR) ? " OCR" : "",
+ (temp & OHCI_BLF) ? " BLF" : "",
+ (temp & OHCI_CLF) ? " CLF" : "",
+ (temp & OHCI_HCR) ? " HCR" : ""
+ );
+
+ ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
+ ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
+
+ maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
+
+ maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
+ maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
+
+ maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
+ maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
+
+ maybe_print_eds ("donehead", readl (®s->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+ __u32 temp, ndp, i;
+
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+
+ if (verbose) {
+ dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+ ((temp & RH_A_POTPGT) >> 24) & 0xff,
+ (temp & RH_A_NOCP) ? " NOCP" : "",
+ (temp & RH_A_OCPM) ? " OCPM" : "",
+ (temp & RH_A_DT) ? " DT" : "",
+ (temp & RH_A_NPS) ? " NPS" : "",
+ (temp & RH_A_PSM) ? " PSM" : "",
+ ndp
+ );
+ temp = roothub_b (controller);
+ dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+ temp,
+ (temp & RH_B_PPCM) >> 16,
+ (temp & RH_B_DR)
+ );
+ temp = roothub_status (controller);
+ dbg ("roothub.status: %08x%s%s%s%s%s%s",
+ temp,
+ (temp & RH_HS_CRWE) ? " CRWE" : "",
+ (temp & RH_HS_OCIC) ? " OCIC" : "",
+ (temp & RH_HS_LPSC) ? " LPSC" : "",
+ (temp & RH_HS_DRWE) ? " DRWE" : "",
+ (temp & RH_HS_OCI) ? " OCI" : "",
+ (temp & RH_HS_LPS) ? " LPS" : ""
+ );
+ }
+
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+ i,
+ temp,
+ (temp & RH_PS_PRSC) ? " PRSC" : "",
+ (temp & RH_PS_OCIC) ? " OCIC" : "",
+ (temp & RH_PS_PSSC) ? " PSSC" : "",
+ (temp & RH_PS_PESC) ? " PESC" : "",
+ (temp & RH_PS_CSC) ? " CSC" : "",
+
+ (temp & RH_PS_LSDA) ? " LSDA" : "",
+ (temp & RH_PS_PPS) ? " PPS" : "",
+ (temp & RH_PS_PRS) ? " PRS" : "",
+ (temp & RH_PS_POCI) ? " POCI" : "",
+ (temp & RH_PS_PSS) ? " PSS" : "",
+
+ (temp & RH_PS_PES) ? " PES" : "",
+ (temp & RH_PS_CCS) ? " CCS" : ""
+ );
+ }
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+ dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+ /* dumps some of the state we know about */
+ ohci_dump_status (controller);
+ if (verbose)
+ ep_print_int_eds (controller, "hcca");
+ dbg ("hcca frame #%04x", controller->hcca->frame_no);
+ ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ ohci_t *ohci;
+ ed_t * ed;
+ urb_priv_t *purb_priv;
+ int i, size = 0;
+
+ ohci = &gohci;
+
+ /* when controller's hung, permit only roothub cleanup attempts
+ * such as powering down ports */
+ if (ohci->disabled) {
+ err("sohci_submit_job: EPIPE");
+ return -1;
+ }
+
+ /* if we have an unfinished URB from previous transaction let's
+ * fail and scream as quickly as possible so as not to corrupt
+ * further communication */
+ if (!urb_finished) {
+ err("sohci_submit_job: URB NOT FINISHED");
+ return -1;
+ }
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb_finished = 0;
+
+ /* every endpoint has a ed, locate and fill it */
+ if (!(ed = ep_add_ed (dev, pipe))) {
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+
+ /* for the private part of the URB we need the number of TDs (size) */
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK: /* one TD for every 4096 Byte */
+ size = (transfer_len - 1) / 4096 + 1;
+ break;
+ case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+ size = (transfer_len == 0)? 2:
+ (transfer_len - 1) / 4096 + 3;
+ break;
+ }
+
+ if (size >= (N_URB_TD - 1)) {
+ err("need %d TDs, only have %d", size, N_URB_TD);
+ return -1;
+ }
+ purb_priv = &urb_priv;
+ purb_priv->pipe = pipe;
+
+ /* fill the private part of the URB */
+ purb_priv->length = size;
+ purb_priv->ed = ed;
+ purb_priv->actual_length = 0;
+
+ /* allocate the TDs */
+ /* note that td[0] was allocated in ep_add_ed */
+ for (i = 0; i < size; i++) {
+ purb_priv->td[i] = td_alloc (dev);
+ if (!purb_priv->td[i]) {
+ purb_priv->length = i;
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+ }
+
+ if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: EINVAL");
+ return -1;
+ }
+
+ /* link the ed into a chain if is not already */
+ if (ed->state != ED_OPER)
+ ep_link (ohci, ed);
+
+ /* fill the TDs and link it to the ed */
+ td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+ ohci_t *ohci = &gohci;
+
+ return ohci_cpu_to_le16 (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->state = ED_OPER;
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ed->hwNextED = 0;
+ if (ohci->ed_controltail == NULL) {
+ writel (ed, &ohci->regs->ed_controlhead);
+ } else {
+ ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_controltail;
+ if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_controltail = edi;
+ break;
+
+ case PIPE_BULK:
+ ed->hwNextED = 0;
+ if (ohci->ed_bulktail == NULL) {
+ writel (ed, &ohci->regs->ed_bulkhead);
+ } else {
+ ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_bulktail;
+ if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_bulktail = edi;
+ break;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_controltail == ed) {
+ ohci->ed_controltail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_BULK:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_bulktail == ed) {
+ ohci->ed_bulktail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+ }
+ ed->state = ED_UNLINK;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+ td_t *td;
+ ed_t *ed_ret;
+ volatile ed_t *ed;
+
+ ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+ (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+ if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+ err("ep_add_ed: pending delete");
+ /* pending delete request */
+ return NULL;
+ }
+
+ if (ed->state == ED_NEW) {
+ ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
+ /* dummy td; end of td list for ed */
+ td = td_alloc (usb_dev);
+ ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
+ ed->hwHeadP = ed->hwTailP;
+ ed->state = ED_UNLINK;
+ ed->type = usb_pipetype (pipe);
+ ohci_dev.ed_cnt++;
+ }
+
+ ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
+ | usb_pipeendpoint (pipe) << 7
+ | (usb_pipeisoc (pipe)? 0x8000: 0)
+ | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+ | usb_pipeslow (pipe) << 13
+ | usb_maxpacket (usb_dev, pipe) << 16);
+
+ return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+ void *data, int len,
+ struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+ volatile td_t *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+ int i;
+#endif
+
+ if (index > urb_priv->length) {
+ err("index > length");
+ return;
+ }
+ /* use this td as the next dummy */
+ td_pt = urb_priv->td [index];
+ td_pt->hwNextTD = 0;
+
+ /* fill the old dummy TD */
+ td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
+
+ td->ed = urb_priv->ed;
+ td->next_dl_td = NULL;
+ td->index = index;
+ td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+ if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
+ for (i = 0; i < len; i++)
+ printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+ printf("\n");
+ }
+#endif
+ if (!len)
+ data = 0;
+
+ td->hwINFO = ohci_cpu_to_le32 (info);
+ td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
+ if (data)
+ td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
+ else
+ td->hwBE = 0;
+ td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
+
+ /* append to queue */
+ td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+ ohci_t *ohci = &gohci;
+ int data_len = transfer_len;
+ void *data;
+ int cnt = 0;
+ __u32 info = 0;
+ unsigned int toggle = 0;
+
+ /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+ toggle = TD_T_TOGGLE;
+ } else {
+ toggle = TD_T_DATA0;
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+ }
+ urb->td_cnt = 0;
+ if (data_len)
+ data = buffer;
+ else
+ data = 0;
+
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK:
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+ while(data_len > 4096) {
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+ data += 4096; data_len -= 4096; cnt++;
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+ cnt++;
+
+ if (!ohci->sleeping)
+ writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+ break;
+
+ case PIPE_CONTROL:
+ info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+ td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+ if (data_len > 0) {
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+ /* NOTE: mishandles transfers >8K, some >4K */
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+ td_fill (ohci, info, data, 0, dev, cnt++, urb);
+ if (!ohci->sleeping)
+ writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+ break;
+ }
+ if (urb->length != cnt)
+ dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+ __u32 tdINFO, tdBE, tdCBP;
+ urb_priv_t *lurb_priv = &urb_priv;
+
+ tdINFO = ohci_cpu_to_le32 (td->hwINFO);
+ tdBE = ohci_cpu_to_le32 (td->hwBE);
+ tdCBP = ohci_cpu_to_le32 (td->hwCBP);
+
+
+ if (!(usb_pipecontrol(lurb_priv->pipe) &&
+ ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+ if (tdBE != 0) {
+ if (td->hwCBP == 0)
+ lurb_priv->actual_length += tdBE - td->data + 1;
+ else
+ lurb_priv->actual_length += tdCBP - td->data;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+ __u32 td_list_hc;
+ td_t *td_rev = NULL;
+ td_t *td_list = NULL;
+ urb_priv_t *lurb_priv = NULL;
+
+ td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
+ ohci->hcca->done_head = 0;
+
+ while (td_list_hc) {
+ td_list = (td_t *)td_list_hc;
+
+ if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
+ lurb_priv = &urb_priv;
+ dbg(" USB-error/status: %x : %p",
+ TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
+ if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
+ if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+ td_list->ed->hwHeadP =
+ (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
+ (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
+ lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+ } else
+ td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
+ }
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
+ }
+
+ td_list->next_dl_td = td_rev;
+ td_rev = td_list;
+ td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
+ }
+ return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+ td_t *td_list_next = NULL;
+ ed_t *ed;
+ int cc = 0;
+ int stat = 0;
+ /* urb_t *urb; */
+ urb_priv_t *lurb_priv;
+ __u32 tdINFO, edHeadP, edTailP;
+
+ while (td_list) {
+ td_list_next = td_list->next_dl_td;
+
+ lurb_priv = &urb_priv;
+ tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
+
+ ed = td_list->ed;
+
+ dl_transfer_length(td_list);
+
+ /* error code of transfer */
+ cc = TD_CC_GET (tdINFO);
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+ if ((ed->state & (ED_OPER | ED_UNLINK))
+ && (lurb_priv->state != URB_DEL)) {
+ dbg("ConditionCode %#x", cc);
+ stat = cc_to_error[cc];
+ urb_finished = 1;
+ }
+ }
+
+ if (ed->state != ED_NEW) {
+ edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
+ edTailP = ohci_cpu_to_le32 (ed->hwTailP);
+
+ /* unlink eds if they are not busy */
+ if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+ ep_unlink (ohci, ed);
+ }
+
+ td_list = td_list_next;
+ }
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'O', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x) len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT roothub_status(&gohci)
+#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+ __u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) &&
+ ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ void * data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u32 datab[4];
+ __u8 *data_buf = (__u8 *)datab;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#endif
+ if (usb_pipeint(pipe)) {
+ info("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = m16_swap (cmd->value);
+ wIndex = m16_swap (cmd->index);
+ wLength = m16_swap (cmd->length);
+
+ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+ dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(__u16 *) data_buf = m16_swap (1); OK (2);
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (
+ RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+ OK (4);
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL): OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ OK(0);
+ case (RH_C_HUB_OVER_CURRENT):
+ WR_RH_STAT(RH_HS_OCIC); OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+ case (RH_C_PORT_CONNECTION):
+ WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+ case (RH_C_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+ case (RH_C_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+ case (RH_C_PORT_OVER_CURRENT):
+ WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+ case (RH_C_PORT_RESET):
+ WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+ case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PRS);
+ OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+ case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PES );
+ OK (0);
+ }
+ break;
+
+ case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des; OK(len);
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des; OK(len);
+ case (0x03): /* string descriptors */
+ if(wValue==0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ OK(len);
+ }
+ if(wValue==0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ OK(len);
+ }
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = roothub_a (&gohci);
+
+ data_buf [0] = 9; /* min length; */
+ data_buf [1] = 0x29;
+ data_buf [2] = temp & RH_A_NDP;
+ data_buf [3] = 0;
+ if (temp & RH_A_PSM) /* per-port power switching? */
+ data_buf [3] |= 0x1;
+ if (temp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf [3] |= 0x10;
+ else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
+ data_buf [3] |= 0x8;
+
+ /* corresponds to data_buf[4-7] */
+ datab [1] = 0;
+ data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+ temp = roothub_b (&gohci);
+ data_buf [7] = temp & RH_B_DR;
+ if (data_buf [2] < 7) {
+ data_buf [8] = 0xff;
+ } else {
+ data_buf [0] += 2;
+ data_buf [8] = (temp & RH_B_DR) >> 8;
+ data_buf [10] = data_buf [9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf [0], wLength));
+ OK (len);
+ }
+
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+
+ default:
+ dbg ("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+
+ len = min_t(int, len, leni);
+ if (data != data_buf)
+ memcpy (data, data_buf, len);
+ dev->act_len = len;
+ dev->status = stat;
+
+#ifdef DEBUG
+ if (transfer_len)
+ urb_priv.actual_length = transfer_len;
+ pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#endif
+
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ int stat = 0;
+ int maxsize = usb_maxpacket(dev, pipe);
+ int timeout;
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_common_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+
+ if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+ err("sohci_submit_job failed");
+ return -1;
+ }
+
+ /* allow more time for a BULK device to react - some are slow */
+#define BULK_TO 5000 /* timeout in milliseconds */
+ if (usb_pipebulk(pipe))
+ timeout = BULK_TO;
+ else
+ timeout = 100;
+
+ /* wait for it to complete */
+ for (;;) {
+ /* check whether the controller is done */
+ stat = hc_interrupt();
+ if (stat < 0) {
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+ /* 0xff is returned for an SF-interrupt */
+ break;
+ }
+
+ if (--timeout) {
+ wait_ms(1);
+ if (!urb_finished)
+ dbg("\%");
+
+ } else {
+ err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ stat = USB_ST_CRC_ERR;
+ urb_finished = 1;
+ break;
+ }
+ }
+#if 0
+ /* we got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+ got_rhsc = 0;
+ /* abuse timeout */
+ timeout = rh_check_port_status(&gohci);
+ if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+ /* the called routine adds 1 to the passed value */
+ usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+ /*
+ * XXX
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+#endif
+
+ dev->status = stat;
+ dev->act_len = transfer_len;
+
+#ifdef DEBUG
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#endif
+
+ /* free TDs in urb_priv */
+ urb_free_priv (&urb_priv);
+ return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ info("submit_bulk_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ int maxsize = usb_maxpacket(dev, pipe);
+
+ info("submit_control_msg");
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_control_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+ gohci.rh.dev = dev;
+ /* root hub - redirect */
+ return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+
+ return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ info("submit_int_msg");
+ return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+ int timeout = 30;
+ int smm_timeout = 50; /* 0,5 sec */
+
+ if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+ writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+ info("USB HC TakeOver from SMM");
+ while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+ wait_ms (10);
+ if (--smm_timeout == 0) {
+ err("USB HC TakeOver failed!");
+ return -1;
+ }
+ }
+ }
+
+ /* Disable HC interrupts */
+ writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+ dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+ ohci->slot_name,
+ readl (&ohci->regs->control));
+
+ /* Reset USB (needed by some controllers) */
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* HC Reset requires max 10 us delay */
+ writel (OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ if (--timeout == 0) {
+ err("USB HC reset timed out!");
+ return -1;
+ }
+ udelay (1);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+ __u32 mask;
+ unsigned int fminterval;
+
+ ohci->disabled = 1;
+
+ /* Tell the controller where the control and bulk lists are
+ * The lists are empty now. */
+
+ writel (0, &ohci->regs->ed_controlhead);
+ writel (0, &ohci->regs->ed_bulkhead);
+
+ writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+ fminterval = 0x2edf;
+ writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+ writel (fminterval, &ohci->regs->fminterval);
+ writel (0x628, &ohci->regs->lsthresh);
+
+ /* start controller operations */
+ ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci->disabled = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* disable all interrupts */
+ mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+ OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+ OHCI_INTR_OC | OHCI_INTR_MIE);
+ writel (mask, &ohci->regs->intrdisable);
+ /* clear all interrupts */
+ mask &= ~OHCI_INTR_MIE;
+ writel (mask, &ohci->regs->intrstatus);
+ /* Choose the interrupts we care about now - but w/o MIE */
+ mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+ writel (mask, &ohci->regs->intrenable);
+
+#ifdef OHCI_USE_NPS
+ /* required for AMD-756 and some Mac platforms */
+ writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+ &ohci->regs->roothub.a);
+ writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+ /* POTPGT delay is bits 24-31, in 2 ms units. */
+ mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+ /* connect the virtual root hub */
+ ohci->rh.devnum = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+ ohci_t *ohci = &gohci;
+ struct ohci_regs *regs = ohci->regs;
+ int ints;
+ int stat = -1;
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
+
+ ints = OHCI_INTR_WDH;
+
+ } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+
+ } else if ((ints &= readl (®s->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+
+ /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+ if (ints & OHCI_INTR_RHSC) {
+ got_rhsc = 1;
+ stat = 0xff;
+ }
+
+ if (ints & OHCI_INTR_UE) {
+ ohci->disabled++;
+ err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+ ohci->slot_name);
+ /* e.g. due to PCI Master/Target Abort */
+
+#ifdef DEBUG
+ ohci_dump (ohci, 1);
+#endif
+ /* FIXME: be optimistic, hope that bug won't repeat often. */
+ /* Make some non-interrupt context restart the controller. */
+ /* Count and limit the retries though; either hardware or */
+ /* software errors can go forever... */
+ hc_reset (ohci);
+ return -1;
+ }
+
+ if (ints & OHCI_INTR_WDH) {
+ writel (OHCI_INTR_WDH, ®s->intrdisable);
+ stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+ writel (OHCI_INTR_WDH, ®s->intrenable);
+ }
+
+ if (ints & OHCI_INTR_SO) {
+ dbg("USB Schedule overrun\n");
+ writel (OHCI_INTR_SO, ®s->intrenable);
+ stat = -1;
+ }
+
+ /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
+ if (ints & OHCI_INTR_SF) {
+ unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
+ wait_ms(1);
+ writel (OHCI_INTR_SF, ®s->intrdisable);
+ if (ohci->ed_rm_list[frame] != NULL)
+ writel (OHCI_INTR_SF, ®s->intrenable);
+ stat = 0xff;
+ }
+
+ writel (ints, ®s->intrstatus);
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+ dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+ if (!ohci->disabled)
+ hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+ memset (&gohci, 0, sizeof (ohci_t));
+ memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+ /* align the storage */
+ if ((__u32)&ghcca[0] & 0xff) {
+ err("HCCA not aligned!!");
+ return -1;
+ }
+ phcca = &ghcca[0];
+ info("aligned ghcca %p", phcca);
+ memset(&ohci_dev, 0, sizeof(struct ohci_device));
+ if ((__u32)&ohci_dev.ed[0] & 0x7) {
+ err("EDs not aligned!!");
+ return -1;
+ }
+ memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+ if ((__u32)gtd & 0x7) {
+ err("TDs not aligned!!");
+ return -1;
+ }
+ ptd = gtd;
+ gohci.hcca = phcca;
+ memset (phcca, 0, sizeof (struct ohci_hcca));
+
+ gohci.disabled = 1;
+ gohci.sleeping = 0;
+ gohci.irq = -1;
+#if defined(CONFIG_440EP)
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
+#endif
+
+ gohci.flags = 0;
+ gohci.slot_name = "ppc440";
+
+ if (hc_reset (&gohci) < 0) {
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+ if (hc_start (&gohci) < 0) {
+ err ("can't start usb-%s", gohci.slot_name);
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+#ifdef DEBUG
+ ohci_dump (&gohci, 1);
+#endif
+ ohci_inited = 1;
+ urb_finished = 1;
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ /* init the device driver */
+ usb_dev_init();
+#endif
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ /* this gets called really early - before the controller has */
+ /* even been initialized! */
+ if (!ohci_inited)
+ return 0;
+ /* TODO release any interrupts, etc. */
+ /* call hc_release_ohci() here ? */
+ hc_reset (&gohci);
+ return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
+#define ED_OPER 0x02
+#define ED_DEL 0x04
+#define ED_URB_DEL 0x08
+
+/* usb_ohci_ed */
+struct ed {
+ __u32 hwINFO;
+ __u32 hwTailP;
+ __u32 hwHeadP;
+ __u32 hwNextED;
+
+ struct ed *ed_prev;
+ __u8 int_period;
+ __u8 int_branch;
+ __u8 int_load;
+ __u8 int_interval;
+ __u8 state;
+ __u8 type;
+ __u16 last_iso;
+ struct ed *ed_rm_list;
+
+ struct usb_device *usb_dev;
+ __u32 unused[3];
+} __attribute__((aligned(16)));
+typedef struct ed ed_t;
+
+/* TD info field */
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
+
+#define MAXPSW 1
+
+struct td {
+ __u32 hwINFO;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u16 hwPSW[MAXPSW];
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
+ struct usb_device *usb_dev;
+ int transfer_len;
+ __u32 data;
+
+ __u32 unused2[2];
+} __attribute__((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP (1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of. It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32 /* part of the OHCI standard */
+struct ohci_hcca {
+ __u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
+ __u16 frame_no; /* current frame number */
+ __u16 pad1; /* set to 0 on each frame_no change */
+#endif
+ __u32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc[116];
+} __attribute__((aligned(256)));
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region. This is Memory Mapped I/O. You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+ /* control and status registers */
+ __u32 revision;
+ __u32 control;
+ __u32 cmdstatus;
+ __u32 intrstatus;
+ __u32 intrenable;
+ __u32 intrdisable;
+ /* memory pointers */
+ __u32 hcca;
+ __u32 ed_periodcurrent;
+ __u32 ed_controlhead;
+ __u32 ed_controlcurrent;
+ __u32 ed_bulkhead;
+ __u32 ed_bulkcurrent;
+ __u32 donehead;
+ /* frame counters */
+ __u32 fminterval;
+ __u32 fmremaining;
+ __u32 fmnumber;
+ __u32 periodicstart;
+ __u32 lsthresh;
+ /* Root hub ports */
+ struct ohci_roothub_regs {
+ __u32 a;
+ __u32 b;
+ __u32 status;
+ __u32 portstatus[MAX_ROOT_PORTS];
+ } roothub;
+} __attribute__((aligned(32)));
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *dev; /* was urb */
+ void *int_addr;
+ int send;
+ int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status */
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct {
+ ed_t *ed;
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
+ int state;
+ unsigned long pipe;
+ int actual_length;
+ td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+typedef struct ohci {
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma; */
+
+ int irq;
+ int disabled; /* e.g. got a UE, we're hung */
+ int sleeping;
+ unsigned long flags; /* for HC bugs */
+
+ struct ohci_regs *regs; /* OHCI controller's memory */
+
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
+ int intrstatus;
+ __u32 hc_control; /* copy of the hc control reg */
+ struct usb_device *dev[32];
+ struct virt_root_hub rh;
+
+ const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+ ed_t ed[NUM_EDS];
+ int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD + 1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *td_alloc(struct usb_device *usb_dev)
+{
+ int i;
+ struct td *td;
+
+ td = NULL;
+ for (i = 0; i < NUM_TD; i++) {
+ if (ptd[i].usb_dev == NULL) {
+ td = &ptd[i];
+ td->usb_dev = usb_dev;
+ break;
+ }
+ }
+
+ return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+ ed->usb_dev = NULL;
+}
--- /dev/null
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
+
+#include <usb.h>
+#include <asm/ppc4xx-uic.h>
+#include "usbdev.h"
+
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+
+int set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+ /*will hold the packet received */
+ struct usb_device_descriptor usb_device_packet;
+ struct usb_configuration_descriptor usb_config_packet;
+ struct usb_string_descriptor usb_string_packet;
+ struct devrequest setup_packet;
+ unsigned int *setup_packet_pt;
+ unsigned char *packet_pt = NULL;
+ int temp, temp1;
+
+ int i;
+
+ /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+ /*set usb address, seems to not work unless it is done in the next
+ interrupt, so that is why it is done this way */
+ if (set_value != -1)
+ *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
+
+ /*endpoint 1 */
+ if (usb2d0_intrin & 0x01) {
+ setup_packet_pt = (unsigned int *)&setup_packet;
+
+ /*copy packet */
+ setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+ setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+ temp = *(unsigned int *)USB2D0_FIFO_0;
+ temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+ /*do some swapping */
+ setup_packet.value = swap_16(setup_packet.value);
+ setup_packet.index = swap_16(setup_packet.index);
+ setup_packet.length = swap_16(setup_packet.length);
+
+ /*clear rx packet */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+ /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+ setup_packet.request, setup_packet.value,
+ setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+ switch (setup_packet.request) {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ switch (setup_packet.value >> 8) {
+ case USB_DT_DEVICE:
+ /*create packet */
+ usb_device_packet.bLength = 18;
+ usb_device_packet.bDescriptorType =
+ USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+ usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+ usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+ usb_device_packet.bDeviceClass = 0xff;
+ usb_device_packet.bDeviceSubClass = 0;
+ usb_device_packet.bDeviceProtocol = 0;
+ usb_device_packet.bMaxPacketSize0 = 32;
+ usb_device_packet.idVendor = swap_16(1);
+ usb_device_packet.idProduct = swap_16(2);
+ usb_device_packet.bcdDevice = swap_16(0x300);
+ usb_device_packet.iManufacturer = 1;
+ usb_device_packet.iProduct = 1;
+ usb_device_packet.iSerialNumber = 1;
+ usb_device_packet.bNumConfigurations = 1;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_device_packet;
+ break;
+
+ case USB_DT_CONFIG:
+ /*create packet */
+ usb_config_packet.bLength = 9;
+ usb_config_packet.bDescriptorType =
+ USB_DT_CONFIG;
+ usb_config_packet.wTotalLength = swap_16(25);
+ usb_config_packet.bNumInterfaces = 1;
+ usb_config_packet.bConfigurationValue = 1;
+ usb_config_packet.iConfiguration = 0;
+ usb_config_packet.bmAttributes = 0x40;
+ usb_config_packet.bMaxPower = 0;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_config_packet;
+ break;
+
+ case USB_DT_STRING:
+ /*create packet */
+ usb_string_packet.bLength = 2;
+ usb_string_packet.bDescriptorType =
+ USB_DT_STRING;
+ usb_string_packet.wData[0] = 0x0094;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_string_packet;
+ break;
+ }
+
+ /*put packet in fifo */
+ for (i = 0; i < (setup_packet.length); i++) {
+ *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+ }
+
+ /*give tx command */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+
+ /*copy usb address */
+ set_value = setup_packet.value;
+
+ break;
+ }
+
+ }
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+ /*check for sof */
+ if (usb2d0_intrusb & 0x08) {
+ /*printf("{USB device} - sof detected\n"); */
+ }
+
+ /*check for reset */
+ if (usb2d0_intrusb & 0x04) {
+ /*printf("{USB device} - reset detected\n"); */
+
+ /*copy usb address of zero, need to do this when usb reset */
+ set_value = 0;
+ }
+
+ if (usb2d0_intrusb & 0x02) {
+ /*printf("{USB device} - resume detected\n"); */
+ }
+
+ if (usb2d0_intrusb & 0x01) {
+ /*printf("{USB device} - suspend detected\n"); */
+ }
+}
+
+int usbInt(void)
+{
+ /*Must read these 2 registers and use values to clear interrupts. If you
+ do not read them then the interrupt will not be cleared. If you do not
+ use the variable the optimizer will not do a read. */
+ volatile unsigned short usb2d0_intrin =
+ *(unsigned short *)USB2D0_INTRIN_16;
+ volatile unsigned char usb2d0_intrusb =
+ *(unsigned char *)USB2D0_INTRUSB_8;
+
+ /*check if there was an endpoint interrupt */
+ if (usb2d0_intrin != 0) {
+ process_endpoints(usb2d0_intrin);
+ }
+
+ /*check for other interrupts */
+ if (usb2d0_intrusb != 0) {
+ process_other(usb2d0_intrusb);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_440EPX)
+void usb_dev_init()
+{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+ printf("USB 2.0 Device init\n");
+ /*select 2.0 device */
+ mtsdr(SDR0_USB0, 0x0); /* 2.0 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+#else
+ printf("USB 1.1 Device init\n");
+ /*select 1.1 device */
+ mtsdr(SDR0_USB0, 0x2); /* 1.1 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
+#endif
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#endif
+
+#endif /* CONFIG_440EP || CONFIG_440EPX */
--- /dev/null
+#include <config.h>
+
+/*Common Registers*/
+#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
+
+/*Indexed Registers*/
+#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
+
+/*FIFOs*/
+#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
+
+void usb_dev_init(void);
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <asm/io.h>
+#include <asm/xilinx_irq.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+ debug("Xilinx PIC at 0x%8x\n", intc);
+
+ /*
+ * Disable all external interrupts until they are
+ * explicitly requested.
+ */
+ out_be32((u32 *) IER, 0);
+
+ /* Acknowledge any pending interrupts just in case. */
+ out_be32((u32 *) IAR, 0xffffffff);
+
+ /* Turn on the Master Enable. */
+ out_be32((u32 *) MER, 0x3UL);
+
+ return;
+}
+
+int xilinx_pic_irq_get(void)
+{
+ u32 irq;
+ irq = in_be32((u32 *) IVR);
+
+ /* If no interrupt is pending then all bits of the IVR are set to 1. As
+ * the IVR is as many bits wide as numbers of inputs are available.
+ * Therefore, if all bits of the IVR are set to one, its content will
+ * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
+ */
+ if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
+ irq = -1; /* report no pending interrupt. */
+
+ debug("get_irq: %d\n", irq);
+ return (irq);
+}
+
+void pic_irq_enable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("enable: %d\n", irq);
+ out_be32((u32 *) SIE, mask);
+}
+
+void pic_irq_disable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("disable: %d\n", irq);
+ out_be32((u32 *) CIE, mask);
+}
+
+void pic_irq_ack(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("ack: %d\n", irq);
+ out_be32((u32 *) IAR, mask);
+}
+
+void external_interrupt(struct pt_regs *regs)
+{
+ int irq;
+
+ irq = xilinx_pic_irq_get();
+ if (irq < 0)
+ return;
+
+ interrupt_run_handler(irq);
+
+ return;
+}
--- /dev/null
+#ifndef _405GP_PCI_H
+#define _405GP_PCI_H
+
+#include <pci.h>
+
+/*----------------------------------------------------------------------------+
+| 405GP PCI core memory map defines.
++----------------------------------------------------------------------------*/
+#define MIN_PCI_MEMADDR1 0x80000000
+#define MIN_PCI_MEMADDR2 0x00000000
+#define MIN_PLB_PCI_IOADDR 0xE8000000 /* PLB side of PCI I/O address space */
+#define MIN_PCI_PCI_IOADDR 0x00000000 /* PCI side of PCI I/O address space */
+#define MAX_PCI_DEVICES 32
+
+/*----------------------------------------------------------------------------+
+| Defines for the 405GP PCI Config address and data registers followed by
+| defines for the standard PCI device configuration header.
++----------------------------------------------------------------------------*/
+#define PCICFGADR 0xEEC00000
+#define PCICFGDATA 0xEEC00004
+
+#define PCIBUSNUM 0x40 /* 405GP specific parameters */
+#define PCISUBBUSNUM 0x41
+#define PCIDISCOUNT 0x42
+#define PCIBRDGOPT1 0x4A
+#define PCIBRDGOPT2 0x60
+
+/*----------------------------------------------------------------------------+
+| Defines for 405GP PCI Master local configuration regs.
++----------------------------------------------------------------------------*/
+#define PMM0LA 0xEF400000
+#define PMM0MA 0xEF400004
+#define PMM0PCILA 0xEF400008
+#define PMM0PCIHA 0xEF40000C
+#define PMM1LA 0xEF400010
+#define PMM1MA 0xEF400014
+#define PMM1PCILA 0xEF400018
+#define PMM1PCIHA 0xEF40001C
+#define PMM2LA 0xEF400020
+#define PMM2MA 0xEF400024
+#define PMM2PCILA 0xEF400028
+#define PMM2PCIHA 0xEF40002C
+
+/*----------------------------------------------------------------------------+
+| Defines for 405GP PCI Target local configuration regs.
++----------------------------------------------------------------------------*/
+#define PTM1MS 0xEF400030
+#define PTM1LA 0xEF400034
+#define PTM2MS 0xEF400038
+#define PTM2LA 0xEF40003C
+
+#define PCIDEVID_405GP 0x0
+
+void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev);
+int pci_arbiter_enabled(void);
+int __pci_pre_init(struct pci_controller *hose);
+void __pci_target_init(struct pci_controller *hose);
+void __pci_master_init(struct pci_controller *hose);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __4XX_PCIE_H
+#define __4XX_PCIE_H
+
+#include <ppc4xx.h>
+#include <pci.h>
+
+#define DCRN_SDR0_CFGADDR 0x00e
+#define DCRN_SDR0_CFGDATA 0x00f
+
+#if defined(CONFIG_440SPE)
+#define CONFIG_SYS_PCIE_NR_PORTS 3
+
+#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
+
+#define DCRN_PCIE0_BASE 0x100
+#define DCRN_PCIE1_BASE 0x120
+#define DCRN_PCIE2_BASE 0x140
+
+#define PCIE0_SDR 0x300
+#define PCIE1_SDR 0x340
+#define PCIE2_SDR 0x370
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define CONFIG_SYS_PCIE_NR_PORTS 2
+
+#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
+
+#define DCRN_PCIE0_BASE 0x100
+#define DCRN_PCIE1_BASE 0x120
+
+#define PCIE0_SDR 0x300
+#define PCIE1_SDR 0x340
+#endif
+
+#if defined(CONFIG_405EX)
+#define CONFIG_SYS_PCIE_NR_PORTS 2
+
+#define CONFIG_SYS_PCIE_ADDR_HIGH 0x00000000
+
+#define DCRN_PCIE0_BASE 0x040
+#define DCRN_PCIE1_BASE 0x060
+
+#define PCIE0_SDR 0x400
+#define PCIE1_SDR 0x440
+#endif
+
+#define PCIE0 DCRN_PCIE0_BASE
+#define PCIE1 DCRN_PCIE1_BASE
+#define PCIE2 DCRN_PCIE2_BASE
+
+#define DCRN_PEGPL_CFGBAH(base) (base + 0x00)
+#define DCRN_PEGPL_CFGBAL(base) (base + 0x01)
+#define DCRN_PEGPL_CFGMSK(base) (base + 0x02)
+#define DCRN_PEGPL_MSGBAH(base) (base + 0x03)
+#define DCRN_PEGPL_MSGBAL(base) (base + 0x04)
+#define DCRN_PEGPL_MSGMSK(base) (base + 0x05)
+#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06)
+#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07)
+#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08)
+#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09)
+#define DCRN_PEGPL_REGBAH(base) (base + 0x12)
+#define DCRN_PEGPL_REGBAL(base) (base + 0x13)
+#define DCRN_PEGPL_REGMSK(base) (base + 0x14)
+#define DCRN_PEGPL_SPECIAL(base) (base + 0x15)
+#define DCRN_PEGPL_CFG(base) (base + 0x16)
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1 0x03a0
+#define PESDR0_PLLLCT2 0x03a1
+#define PESDR0_PLLLCT3 0x03a2
+
+/* common regs, at for all 4xx with PCIe core */
+#define SDRN_PESDR_UTLSET1(n) (sdr_base(n) + 0x00)
+#define SDRN_PESDR_UTLSET2(n) (sdr_base(n) + 0x01)
+#define SDRN_PESDR_DLPSET(n) (sdr_base(n) + 0x02)
+#define SDRN_PESDR_LOOP(n) (sdr_base(n) + 0x03)
+#define SDRN_PESDR_RCSSET(n) (sdr_base(n) + 0x04)
+#define SDRN_PESDR_RCSSTS(n) (sdr_base(n) + 0x05)
+
+#if defined(CONFIG_440SPE)
+#define SDRN_PESDR_HSSL0SET1(n) (sdr_base(n) + 0x06)
+#define SDRN_PESDR_HSSL0SET2(n) (sdr_base(n) + 0x07)
+#define SDRN_PESDR_HSSL0STS(n) (sdr_base(n) + 0x08)
+#define SDRN_PESDR_HSSL1SET1(n) (sdr_base(n) + 0x09)
+#define SDRN_PESDR_HSSL1SET2(n) (sdr_base(n) + 0x0a)
+#define SDRN_PESDR_HSSL1STS(n) (sdr_base(n) + 0x0b)
+#define SDRN_PESDR_HSSL2SET1(n) (sdr_base(n) + 0x0c)
+#define SDRN_PESDR_HSSL2SET2(n) (sdr_base(n) + 0x0d)
+#define SDRN_PESDR_HSSL2STS(n) (sdr_base(n) + 0x0e)
+#define SDRN_PESDR_HSSL3SET1(n) (sdr_base(n) + 0x0f)
+#define SDRN_PESDR_HSSL3SET2(n) (sdr_base(n) + 0x10)
+#define SDRN_PESDR_HSSL3STS(n) (sdr_base(n) + 0x11)
+
+#define PESDR0_UTLSET1 0x0300
+#define PESDR0_UTLSET2 0x0301
+#define PESDR0_DLPSET 0x0302
+#define PESDR0_LOOP 0x0303
+#define PESDR0_RCSSET 0x0304
+#define PESDR0_RCSSTS 0x0305
+#define PESDR0_HSSL0SET1 0x0306
+#define PESDR0_HSSL0SET2 0x0307
+#define PESDR0_HSSL0STS 0x0308
+#define PESDR0_HSSL1SET1 0x0309
+#define PESDR0_HSSL1SET2 0x030a
+#define PESDR0_HSSL1STS 0x030b
+#define PESDR0_HSSL2SET1 0x030c
+#define PESDR0_HSSL2SET2 0x030d
+#define PESDR0_HSSL2STS 0x030e
+#define PESDR0_HSSL3SET1 0x030f
+#define PESDR0_HSSL3SET2 0x0310
+#define PESDR0_HSSL3STS 0x0311
+#define PESDR0_HSSL4SET1 0x0312
+#define PESDR0_HSSL4SET2 0x0313
+#define PESDR0_HSSL4STS 0x0314
+#define PESDR0_HSSL5SET1 0x0315
+#define PESDR0_HSSL5SET2 0x0316
+#define PESDR0_HSSL5STS 0x0317
+#define PESDR0_HSSL6SET1 0x0318
+#define PESDR0_HSSL6SET2 0x0319
+#define PESDR0_HSSL6STS 0x031a
+#define PESDR0_HSSL7SET1 0x031b
+#define PESDR0_HSSL7SET2 0x031c
+#define PESDR0_HSSL7STS 0x031d
+#define PESDR0_HSSCTLSET 0x031e
+#define PESDR0_LANE_ABCD 0x031f
+#define PESDR0_LANE_EFGH 0x0320
+
+#define PESDR1_UTLSET1 0x0340
+#define PESDR1_UTLSET2 0x0341
+#define PESDR1_DLPSET 0x0342
+#define PESDR1_LOOP 0x0343
+#define PESDR1_RCSSET 0x0344
+#define PESDR1_RCSSTS 0x0345
+#define PESDR1_HSSL0SET1 0x0346
+#define PESDR1_HSSL0SET2 0x0347
+#define PESDR1_HSSL0STS 0x0348
+#define PESDR1_HSSL1SET1 0x0349
+#define PESDR1_HSSL1SET2 0x034a
+#define PESDR1_HSSL1STS 0x034b
+#define PESDR1_HSSL2SET1 0x034c
+#define PESDR1_HSSL2SET2 0x034d
+#define PESDR1_HSSL2STS 0x034e
+#define PESDR1_HSSL3SET1 0x034f
+#define PESDR1_HSSL3SET2 0x0350
+#define PESDR1_HSSL3STS 0x0351
+#define PESDR1_HSSCTLSET 0x0352
+#define PESDR1_LANE_ABCD 0x0353
+
+#define PESDR2_UTLSET1 0x0370
+#define PESDR2_UTLSET2 0x0371
+#define PESDR2_DLPSET 0x0372
+#define PESDR2_LOOP 0x0373
+#define PESDR2_RCSSET 0x0374
+#define PESDR2_RCSSTS 0x0375
+#define PESDR2_HSSL0SET1 0x0376
+#define PESDR2_HSSL0SET2 0x0377
+#define PESDR2_HSSL0STS 0x0378
+#define PESDR2_HSSL1SET1 0x0379
+#define PESDR2_HSSL1SET2 0x037a
+#define PESDR2_HSSL1STS 0x037b
+#define PESDR2_HSSL2SET1 0x037c
+#define PESDR2_HSSL2SET2 0x037d
+#define PESDR2_HSSL2STS 0x037e
+#define PESDR2_HSSL3SET1 0x037f
+#define PESDR2_HSSL3SET2 0x0380
+#define PESDR2_HSSL3STS 0x0381
+#define PESDR2_HSSCTLSET 0x0382
+#define PESDR2_LANE_ABCD 0x0383
+
+#elif defined(CONFIG_405EX)
+
+#define SDRN_PESDR_PHYSET1(n) (sdr_base(n) + 0x06)
+#define SDRN_PESDR_PHYSET2(n) (sdr_base(n) + 0x07)
+#define SDRN_PESDR_BIST(n) (sdr_base(n) + 0x08)
+#define SDRN_PESDR_LPB(n) (sdr_base(n) + 0x0b)
+#define SDRN_PESDR_PHYSTA(n) (sdr_base(n) + 0x0c)
+
+#define PESDR0_UTLSET1 0x0400
+#define PESDR0_UTLSET2 0x0401
+#define PESDR0_DLPSET 0x0402
+#define PESDR0_LOOP 0x0403
+#define PESDR0_RCSSET 0x0404
+#define PESDR0_RCSSTS 0x0405
+#define PESDR0_PHYSET1 0x0406
+#define PESDR0_PHYSET2 0x0407
+#define PESDR0_BIST 0x0408
+#define PESDR0_LPB 0x040B
+#define PESDR0_PHYSTA 0x040C
+
+#define PESDR1_UTLSET1 0x0440
+#define PESDR1_UTLSET2 0x0441
+#define PESDR1_DLPSET 0x0442
+#define PESDR1_LOOP 0x0443
+#define PESDR1_RCSSET 0x0444
+#define PESDR1_RCSSTS 0x0445
+#define PESDR1_PHYSET1 0x0446
+#define PESDR1_PHYSET2 0x0447
+#define PESDR1_BIST 0x0448
+#define PESDR1_LPB 0x044B
+#define PESDR1_PHYSTA 0x044C
+
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
+#define PESDR0_L0BIST 0x0308 /* PE0 L0 built in self test */
+#define PESDR0_L0BISTSTS 0x0309 /* PE0 L0 built in self test status */
+#define PESDR0_L0CDRCTL 0x030A /* PE0 L0 CDR control */
+#define PESDR0_L0DRV 0x030B /* PE0 L0 drive */
+#define PESDR0_L0REC 0x030C /* PE0 L0 receiver */
+#define PESDR0_L0LPB 0x030D /* PE0 L0 loopback */
+#define PESDR0_L0CLK 0x030E /* PE0 L0 clocking */
+#define PESDR0_PHY_CTL_RST 0x030F /* PE0 PHY control reset */
+#define PESDR0_RSTSTA 0x0310 /* PE0 reset status */
+#define PESDR0_OBS 0x0311 /* PE0 observation register */
+#define PESDR0_L0ERRC 0x0320 /* PE0 L0 error counter */
+
+#define PESDR1_L0BIST 0x0348 /* PE1 L0 built in self test */
+#define PESDR1_L1BIST 0x0349 /* PE1 L1 built in self test */
+#define PESDR1_L2BIST 0x034A /* PE1 L2 built in self test */
+#define PESDR1_L3BIST 0x034B /* PE1 L3 built in self test */
+#define PESDR1_L0BISTSTS 0x034C /* PE1 L0 built in self test status */
+#define PESDR1_L1BISTSTS 0x034D /* PE1 L1 built in self test status */
+#define PESDR1_L2BISTSTS 0x034E /* PE1 L2 built in self test status */
+#define PESDR1_L3BISTSTS 0x034F /* PE1 L3 built in self test status */
+#define PESDR1_L0CDRCTL 0x0350 /* PE1 L0 CDR control */
+#define PESDR1_L1CDRCTL 0x0351 /* PE1 L1 CDR control */
+#define PESDR1_L2CDRCTL 0x0352 /* PE1 L2 CDR control */
+#define PESDR1_L3CDRCTL 0x0353 /* PE1 L3 CDR control */
+#define PESDR1_L0DRV 0x0354 /* PE1 L0 drive */
+#define PESDR1_L1DRV 0x0355 /* PE1 L1 drive */
+#define PESDR1_L2DRV 0x0356 /* PE1 L2 drive */
+#define PESDR1_L3DRV 0x0357 /* PE1 L3 drive */
+#define PESDR1_L0REC 0x0358 /* PE1 L0 receiver */
+#define PESDR1_L1REC 0x0359 /* PE1 L1 receiver */
+#define PESDR1_L2REC 0x035A /* PE1 L2 receiver */
+#define PESDR1_L3REC 0x035B /* PE1 L3 receiver */
+#define PESDR1_L0LPB 0x035C /* PE1 L0 loopback */
+#define PESDR1_L1LPB 0x035D /* PE1 L1 loopback */
+#define PESDR1_L2LPB 0x035E /* PE1 L2 loopback */
+#define PESDR1_L3LPB 0x035F /* PE1 L3 loopback */
+#define PESDR1_L0CLK 0x0360 /* PE1 L0 clocking */
+#define PESDR1_L1CLK 0x0361 /* PE1 L1 clocking */
+#define PESDR1_L2CLK 0x0362 /* PE1 L2 clocking */
+#define PESDR1_L3CLK 0x0363 /* PE1 L3 clocking */
+#define PESDR1_PHY_CTL_RST 0x0364 /* PE1 PHY control reset */
+#define PESDR1_RSTSTA 0x0365 /* PE1 reset status */
+#define PESDR1_OBS 0x0366 /* PE1 observation register */
+#define PESDR1_L0ERRC 0x0368 /* PE1 L0 error counter */
+#define PESDR1_L1ERRC 0x0369 /* PE1 L1 error counter */
+#define PESDR1_L2ERRC 0x036A /* PE1 L2 error counter */
+#define PESDR1_L3ERRC 0x036B /* PE1 L3 error counter */
+#define PESDR0_IHS1 0x036C /* PE interrupt handler interfact setting 1 */
+#define PESDR0_IHS2 0x036D /* PE interrupt handler interfact setting 2 */
+
+#endif
+
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
+
+#define PESDRx_RCSSTS_PLBIDL 0x10000000
+#define PESDRx_RCSSTS_HRSTRQ 0x01000000
+#define PESDRx_RCSSTS_PGRST 0x00100000
+#define PESDRx_RCSSTS_VC0ACT 0x00010000
+#define PESDRx_RCSSTS_BMEN 0x00000100
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL 0x00
+#define PEUTL_PBBSZ 0x20
+#define PEUTL_OPDBSZ 0x68
+#define PEUTL_IPHBSZ 0x70
+#define PEUTL_IPDBSZ 0x78
+#define PEUTL_OUTTR 0x90
+#define PEUTL_INTR 0x98
+#define PEUTL_PCTL 0xa0
+#define PEUTL_RCSTA 0xb0
+#define PEUTL_RCIRQEN 0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA 0x210
+#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2LMPA 0x220
+#define PECFG_BAR2HMPA 0x224
+
+#define PECFG_PIMEN 0x33c
+#define PECFG_PIM0LAL 0x340
+#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
+#define PECFG_POM0LAL 0x380
+#define PECFG_POM0LAH 0x384
+
+#define SDR_READ(offset) ({\
+ mtdcr(DCRN_SDR0_CFGADDR, offset); \
+ mfdcr(DCRN_SDR0_CFGDATA);})
+
+#define SDR_WRITE(offset, data) ({\
+ mtdcr(DCRN_SDR0_CFGADDR, offset); \
+ mtdcr(DCRN_SDR0_CFGDATA,data);})
+
+#define GPL_DMER_MASK_DISA 0x02000000
+
+#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
+
+/*
+ * Prototypes
+ */
+int ppc4xx_init_pcie(void);
+int ppc4xx_init_pcie_rootport(int port);
+int ppc4xx_init_pcie_endport(int port);
+void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port);
+int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port);
+int pcie_hose_scan(struct pci_controller *hose, int bus);
+
+/*
+ * Function to determine root port or endport from env variable.
+ */
+static inline int is_end_point(int port)
+{
+ char s[10], *tk;
+ char *pcie_mode = getenv("pcie_mode");
+
+ if (pcie_mode == NULL)
+ return 0;
+
+ strcpy(s, pcie_mode);
+ tk = strtok(s, ":");
+
+ switch (port) {
+ case 0:
+ if (tk != NULL) {
+ if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+ return 1;
+ else
+ return 0;
+ }
+ else
+ return 0;
+
+ case 1:
+ tk = strtok(NULL, ":");
+ if (tk != NULL) {
+ if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+ return 1;
+ else
+ return 0;
+ }
+ else
+ return 0;
+
+ case 2:
+ tk = strtok(NULL, ":");
+ if (tk != NULL)
+ tk = strtok(NULL, ":");
+ if (tk != NULL) {
+ if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
+ return 1;
+ else
+ return 0;
+ }
+ else
+ return 0;
+ }
+
+ return 0;
+}
+
+static inline void mdelay(int n)
+{
+ u32 ms = n;
+
+ while (ms--)
+ udelay(1000);
+}
+
+#if defined(PCIE0_SDR)
+static inline u32 sdr_base(int port)
+{
+ switch (port) {
+ default: /* to satisfy compiler */
+ case 0:
+ return PCIE0_SDR;
+ case 1:
+ return PCIE1_SDR;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ return PCIE2_SDR;
+#endif
+ }
+}
+#endif /* defined(PCIE0_SDR) */
+
+#endif /* __4XX_PCIE_H */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: 5xx_immap.h
+ *
+ * Discription: MPC555 Internal Memory Map
+ *
+ */
+
+#ifndef __IMMAP_5XX__
+#define __IMMAP_5XX__
+
+/* System Configuration Registers.
+*/
+typedef struct sys_conf {
+ uint sc_siumcr;
+ uint sc_sypcr;
+ char res1[6];
+ ushort sc_swsr;
+ uint sc_sipend;
+ uint sc_simask;
+ uint sc_siel;
+ uint sc_sivec;
+ uint sc_tesr;
+ uint sc_sgpiodt1;
+ uint sc_sgpiodt2;
+ uint sc_sgpiocr;
+ uint sc_emcr;
+ uint sc_res1aa;
+ uint sc_res1ab;
+ uint sc_pdmcr;
+ char res3[192];
+} sysconf5xx_t;
+
+
+/* Memory Controller Registers.
+*/
+typedef struct mem_ctlr {
+ uint memc_br0;
+ uint memc_or0;
+ uint memc_br1;
+ uint memc_or1;
+ uint memc_br2;
+ uint memc_or2;
+ uint memc_br3;
+ uint memc_or3;
+ char res1[32];
+ uint memc_dmbr;
+ uint memc_dmor;
+ char res2[48];
+ ushort memc_mstat;
+ ushort memc_res4a;
+ char res3[132];
+} memctl5xx_t;
+
+/* System Integration Timers.
+*/
+typedef struct sys_int_timers {
+ ushort sit_tbscr;
+ char res1[2];
+ uint sit_tbref0;
+ uint sit_tbref1;
+ char res2[20];
+ ushort sit_rtcsc;
+ char res3[2];
+ uint sit_rtc;
+ uint sit_rtsec;
+ uint sit_rtcal;
+ char res4[16];
+ ushort sit_piscr;
+ char res5[2];
+ uint sit_pitc;
+ uint sit_pitr;
+ char res6[52];
+} sit5xx_t;
+
+/* Clocks and Reset
+*/
+typedef struct clk_and_reset {
+ uint car_sccr;
+ uint car_plprcr;
+ ushort car_rsr;
+ ushort car_res7a;
+ ushort car_colir;
+ ushort car_res7b;
+ ushort car_vsrmcr;
+ ushort car_res7c;
+ char res1[108];
+
+} car5xx_t;
+
+#define TBSCR_TBE ((ushort)0x0001)
+
+/* System Integration Timer Keys
+*/
+typedef struct sitk {
+ uint sitk_tbscrk;
+ uint sitk_tbref0k;
+ uint sitk_tbref1k;
+ uint sitk_tbk;
+ char res1[16];
+ uint sitk_rtcsck;
+ uint sitk_rtck;
+ uint sitk_rtseck;
+ uint sitk_rtcalk;
+ char res2[16];
+ uint sitk_piscrk;
+ uint sitk_pitck;
+ char res3[56];
+} sitk5xx_t;
+
+/* Clocks and Reset Keys.
+*/
+typedef struct cark {
+ uint cark_sccrk;
+ uint cark_plprcrk;
+ uint cark_rsrk;
+ char res1[1140];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY ((unsigned int)0x55ccaa33)
+
+/* Flash Configuration
+*/
+typedef struct fl {
+ uint fl_cmfmcr;
+ uint fl_cmftst;
+ uint fl_cmfctl;
+ char res1[52];
+} fl5xx_t;
+
+/* Dpram Control
+*/
+typedef struct dprc {
+ ushort dprc_dptmcr;
+ ushort dprc_ramtst;
+ ushort dprc_rambar;
+ ushort dprc_misrh;
+ ushort dprc_misrl;
+ ushort dprc_miscnt;
+} dprc5xx_t;
+
+/* Time Processor Unit
+*/
+typedef struct tpu {
+ ushort tpu_tpumcr;
+ ushort tpu_tcr;
+ ushort tpu_dscr;
+ ushort tpu_dssr;
+ ushort tpu_ticr;
+ ushort tpu_cier;
+ ushort tpu_cfsr0;
+ ushort tpu_cfsr1;
+ ushort tpu_cfsr2;
+ ushort tpu_cfsr3;
+ ushort tpu_hsqr0;
+ ushort tpu_hsqr1;
+ ushort tpu_hsrr0;
+ ushort tpu_hsrr1;
+ ushort tpu_cpr0;
+ ushort tpu_cpr1;
+ ushort tpu_cisr;
+ ushort tpu_lr;
+ ushort tpu_sglr;
+ ushort tpu_dcnr;
+ ushort tpu_tpumcr2;
+ ushort tpu_tpumcr3;
+ ushort tpu_isdr;
+ ushort tpu_iscr;
+ char res1[208];
+ char tpu[16][16];
+ char res2[512];
+} tpu5xx_t;
+
+/* QADC
+*/
+typedef struct qadc {
+ ushort qadc_64mcr;
+ ushort qadc_64test;
+ ushort qadc_64int;
+ u_char qadc_portqa;
+ u_char qadc_portqb;
+ ushort qadc_ddrqa;
+ ushort qadc_qacr0;
+ ushort qadc_qacr1;
+ ushort qadc_qacr2;
+ ushort qadc_qasr0;
+ ushort qadc_qasr1;
+ char res1[492];
+ /* command convertion word table */
+ ushort qadc_ccw[64];
+ /* result word table, unsigned right justified */
+ ushort qadc_rjurr[64];
+ /* result word table, signed left justified */
+ ushort qadc_ljsrr[64];
+ /* result word table, unsigned left justified */
+ ushort qadc_ljurr[64];
+} qadc5xx_t;
+
+/* QSMCM
+*/
+typedef struct qsmcm {
+ ushort qsmcm_qsmcr;
+ ushort qsmcm_qtest;
+ ushort qsmcm_qdsci_il;
+ ushort qsmcm_qspi_il;
+ ushort qsmcm_scc1r0;
+ ushort qsmcm_scc1r1;
+ ushort qsmcm_sc1sr;
+ ushort qsmcm_sc1dr;
+ char res1[2];
+ char res2[2];
+ ushort qsmcm_portqs;
+ u_char qsmcm_pqspar;
+ u_char qsmcm_ddrqs;
+ ushort qsmcm_spcr0;
+ ushort qsmcm_spcr1;
+ ushort qsmcm_spcr2;
+ u_char qsmcm_spcr3;
+ u_char qsmcm_spsr;
+ ushort qsmcm_scc2r0;
+ ushort qsmcm_scc2r1;
+ ushort qsmcm_sc2sr;
+ ushort qsmcm_sc2dr;
+ ushort qsmcm_qsci1cr;
+ ushort qsmcm_qsci1sr;
+ ushort qsmcm_sctq[16];
+ ushort qsmcm_scrq[16];
+ char res3[212];
+ ushort qsmcm_recram[32];
+ ushort qsmcm_tranram[32];
+ u_char qsmcm_comdram[32];
+ char res[3616];
+} qsmcm5xx_t;
+
+
+/* MIOS
+*/
+
+typedef struct mios {
+ ushort mios_mpwmsm0perr; /* mpwmsm0 */
+ ushort mios_mpwmsm0pulr;
+ ushort mios_mpwmsm0cntr;
+ ushort mios_mpwmsm0scr;
+ ushort mios_mpwmsm1perr; /* mpwmsm1 */
+ ushort mios_mpwmsm1pulr;
+ ushort mios_mpwmsm1cntr;
+ ushort mios_mpwmsm1scr;
+ ushort mios_mpwmsm2perr; /* mpwmsm2 */
+ ushort mios_mpwmsm2pulr;
+ ushort mios_mpwmsm2cntr;
+ ushort mios_mpwmsm2scr;
+ ushort mios_mpwmsm3perr; /* mpwmsm3 */
+ ushort mios_mpwmsm3pulr;
+ ushort mios_mpwmsm3cntr;
+ ushort mios_mpwmsm3scr;
+ char res1[16];
+ ushort mios_mmcsm6cnt; /* mmcsm6 */
+ ushort mios_mmcsm6mlr;
+ ushort mios_mmcsm6scrd, mmcsm6scr;
+ char res2[32];
+ ushort mios_mdasm11ar; /* mdasm11 */
+ ushort mios_mdasm11br;
+ ushort mios_mdasm11scrd, mdasm11scr;
+ ushort mios_mdasm12ar; /* mdasm12 */
+ ushort mios_mdasm12br;
+ ushort mios_mdasm12scrd, mdasm12scr;
+ ushort mios_mdasm13ar; /* mdasm13 */
+ ushort mios_mdasm13br;
+ ushort mios_mdasm13scrd, mdasm13scr;
+ ushort mios_mdasm14ar; /* mdasm14 */
+ ushort mios_mdasm14br;
+ ushort mios_mdasm14scrd, mdasm14scr;
+ ushort mios_mdasm15ar; /* mdasm15 */
+ ushort mios_mdasm15br;
+ ushort mios_mdasm15scrd, mdasm15scr;
+ ushort mios_mpwmsm16perr; /* mpwmsm16 */
+ ushort mios_mpwmsm16pulr;
+ ushort mios_mpwmsm16cntr;
+ ushort mios_mpwmsm16scr;
+ ushort mios_mpwmsm17perr; /* mpwmsm17 */
+ ushort mios_mpwmsm17pulr;
+ ushort mios_mpwmsm17cntr;
+ ushort mios_mpwmsm17scr;
+ ushort mios_mpwmsm18perr; /* mpwmsm18 */
+ ushort mios_mpwmsm18pulr;
+ ushort mios_mpwmsm18cntr;
+ ushort mios_mpwmsm18scr;
+ ushort mios_mpwmsm19perr; /* mpwmsm19 */
+ ushort mios_mpwmsm19pulr;
+ ushort mios_mpwmsm19cntr;
+ ushort mios_mpwmsm19scr;
+ char res3[16];
+ ushort mios_mmcsm22cnt; /* mmcsm22 */
+ ushort mios_mmcsm22mlr;
+ ushort mios_mmcsm22scrd, mmcsm22scr;
+ char res4[32];
+ ushort mios_mdasm27ar; /* mdasm27 */
+ ushort mios_mdasm27br;
+ ushort mios_mdasm27scrd, mdasm27scr;
+ ushort mios_mdasm28ar; /*mdasm28 */
+ ushort mios_mdasm28br;
+ ushort mios_mdasm28scrd, mdasm28scr;
+ ushort mios_mdasm29ar; /* mdasm29 */
+ ushort mios_mdasm29br;
+ ushort mios_mdasm29scrd, mdasm29scr;
+ ushort mios_mdasm30ar; /* mdasm30 */
+ ushort mios_mdasm30br;
+ ushort mios_mdasm30scrd, mdasm30scr;
+ ushort mios_mdasm31ar; /* mdasm31 */
+ ushort mios_mdasm31br;
+ ushort mios_mdasm31scrd, mdasm31scr;
+ ushort mios_mpiosm32dr;
+ ushort mios_mpiosm32ddr;
+ char res5[1788];
+ ushort mios_mios1tpcr;
+ char mios_res13[2];
+ ushort mios_mios1vnr;
+ ushort mios_mios1mcr;
+ char res6[12];
+ ushort mios_res42z;
+ ushort mios_mcpsmscr;
+ char res7[1000];
+ ushort mios_mios1sr0;
+ char res12[2];
+ ushort mios_mios1er0;
+ ushort mios_mios1rpr0;
+ char res8[40];
+ ushort mios_mios1lvl0;
+ char res9[14];
+ ushort mios_mios1sr1;
+ char res10[2];
+ ushort mios_mios1er1;
+ ushort mios_mios1rpr1;
+ char res11[40];
+ ushort mios_mios1lvl1;
+ char res13[1038];
+} mios5xx_t;
+
+/* Toucan Module
+*/
+typedef struct tcan {
+ ushort tcan_tcnmcr;
+ ushort tcan_cantcr;
+ ushort tcan_canicr;
+ u_char tcan_canctrl0;
+ u_char tcan_canctrl1;
+ u_char tcan_presdiv;
+ u_char tcan_canctrl2;
+ ushort tcan_timer;
+ char res1[4];
+ ushort tcan_rxgmskhi;
+ ushort tcan_rxgmsklo;
+ ushort tcan_rx14mskhi;
+ ushort tcan_rx14msklo;
+ ushort tcan_rx15mskhi;
+ ushort tcan_rx15msklo;
+ char res2[4];
+ ushort tcan_estat;
+ ushort tcan_imask;
+ ushort tcan_iflag;
+ u_char tcan_rxectr;
+ u_char tcan_txectr;
+ char res3[88];
+ struct {
+ ushort scr;
+ ushort id_high;
+ ushort id_low;
+ u_char data[8];
+ char res4[2];
+ } tcan_mbuff[16];
+ char res5[640];
+} tcan5xx_t;
+
+/* UIMB
+*/
+typedef struct uimb {
+ uint uimb_umcr;
+ char res1[12];
+ uint uimb_utstcreg;
+ char res2[12];
+ uint uimb_uipend;
+} uimb5xx_t;
+
+
+/* Internal Memory Map MPC555
+*/
+typedef struct immap {
+ char res1[262144]; /* CMF Flash A 256 Kbytes */
+ char res2[196608]; /* CMF Flash B 192 Kbytes */
+ char res3[2670592]; /* Reserved for Flash */
+ sysconf5xx_t im_siu_conf; /* SIU Configuration */
+ memctl5xx_t im_memctl; /* Memory Controller */
+ sit5xx_t im_sit; /* System Integration Timers */
+ car5xx_t im_clkrst; /* Clocks and Reset */
+ sitk5xx_t im_sitk; /* System Integration Timer Keys*/
+ cark8xx_t im_clkrstk; /* Clocks and Resert Keys */
+ fl5xx_t im_fla; /* Flash Module A */
+ fl5xx_t im_flb; /* Flash Module B */
+ char res4[14208]; /* Reserved for SIU */
+ dprc5xx_t im_dprc; /* Dpram Control Register */
+ char res5[8180]; /* Reserved */
+ char dptram[6144]; /* Dptram */
+ char res6[2048]; /* Reserved */
+ tpu5xx_t im_tpua; /* Time Proessing Unit A */
+ tpu5xx_t im_tpub; /* Time Processing Unit B */
+ qadc5xx_t im_qadca; /* QADC A */
+ qadc5xx_t im_qadcb; /* QADC B */
+ qsmcm5xx_t im_qsmcm; /* SCI and SPI */
+ mios5xx_t im_mios; /* MIOS */
+ tcan5xx_t im_tcana; /* Toucan A */
+ tcan5xx_t im_tcanb; /* Toucan B */
+ char res7[1792]; /* Reserved */
+ uimb5xx_t im_uimb; /* UIMB */
+} immap_t;
+
+#endif /* __IMMAP_5XX__ */
--- /dev/null
+
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions. It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try. -- Dan
+ */
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef struct sys_conf {
+ uint sc_siumcr;
+ uint sc_sypcr;
+ uint sc_swt;
+ char res1[2];
+ ushort sc_swsr;
+ uint sc_sipend;
+ uint sc_simask;
+ uint sc_siel;
+ uint sc_sivec;
+ uint sc_tesr;
+ char res2[0xc];
+ uint sc_sdcr;
+ char res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+ uint pcmc_pbr0;
+ uint pcmc_por0;
+ uint pcmc_pbr1;
+ uint pcmc_por1;
+ uint pcmc_pbr2;
+ uint pcmc_por2;
+ uint pcmc_pbr3;
+ uint pcmc_por3;
+ uint pcmc_pbr4;
+ uint pcmc_por4;
+ uint pcmc_pbr5;
+ uint pcmc_por5;
+ uint pcmc_pbr6;
+ uint pcmc_por6;
+ uint pcmc_pbr7;
+ uint pcmc_por7;
+ char res1[0x20];
+ uint pcmc_pgcra;
+ uint pcmc_pgcrb;
+ uint pcmc_pscr;
+ char res2[4];
+ uint pcmc_pipr;
+ char res3[4];
+ uint pcmc_per;
+ char res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct mem_ctlr {
+ uint memc_br0;
+ uint memc_or0;
+ uint memc_br1;
+ uint memc_or1;
+ uint memc_br2;
+ uint memc_or2;
+ uint memc_br3;
+ uint memc_or3;
+ uint memc_br4;
+ uint memc_or4;
+ uint memc_br5;
+ uint memc_or5;
+ uint memc_br6;
+ uint memc_or6;
+ uint memc_br7;
+ uint memc_or7;
+ char res1[0x24];
+ uint memc_mar;
+ uint memc_mcr;
+ char res2[4];
+ uint memc_mamr;
+ uint memc_mbmr;
+ ushort memc_mstat;
+ ushort memc_mptpr;
+ uint memc_mdr;
+ char res3[0x80];
+} memctl8xx_t;
+
+/* System Integration Timers.
+*/
+typedef struct sys_int_timers {
+ ushort sit_tbscr;
+ char res0[0x02];
+ uint sit_tbreff0;
+ uint sit_tbreff1;
+ char res1[0x14];
+ ushort sit_rtcsc;
+ char res2[0x02];
+ uint sit_rtc;
+ uint sit_rtsec;
+ uint sit_rtcal;
+ char res3[0x10];
+ ushort sit_piscr;
+ char res4[2];
+ uint sit_pitc;
+ uint sit_pitr;
+ char res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
+#define TBSCR_REFA ((ushort)0x0080)
+#define TBSCR_REFB ((ushort)0x0040)
+#define TBSCR_REFAE ((ushort)0x0008)
+#define TBSCR_REFBE ((ushort)0x0004)
+#define TBSCR_TBF ((ushort)0x0002)
+#define TBSCR_TBE ((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
+#define RTCSC_SEC ((ushort)0x0080)
+#define RTCSC_ALR ((ushort)0x0040)
+#define RTCSC_38K ((ushort)0x0010)
+#define RTCSC_SIE ((ushort)0x0008)
+#define RTCSC_ALE ((ushort)0x0004)
+#define RTCSC_RTF ((ushort)0x0002)
+#define RTCSC_RTE ((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK ((ushort)0xff00)
+#define PISCR_PS ((ushort)0x0080)
+#define PISCR_PIE ((ushort)0x0004)
+#define PISCR_PTF ((ushort)0x0002)
+#define PISCR_PTE ((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+ uint car_sccr;
+ uint car_plprcr;
+ uint car_rsr;
+ char res[0x74]; /* Reserved area */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+ uint sitk_tbscrk;
+ uint sitk_tbreff0k;
+ uint sitk_tbreff1k;
+ uint sitk_tbk;
+ char res1[0x10];
+ uint sitk_rtcsck;
+ uint sitk_rtck;
+ uint sitk_rtseck;
+ uint sitk_rtcalk;
+ char res2[0x10];
+ uint sitk_piscrk;
+ uint sitk_pitck;
+ char res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+ uint cark_sccrk;
+ uint cark_plprcrk;
+ uint cark_rsrk;
+ char res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY ((unsigned int)0x55ccaa33)
+
+/* Video interface. MPC823 Only.
+*/
+typedef struct vid823 {
+ ushort vid_vccr;
+ ushort res1;
+ u_char vid_vsr;
+ u_char res2;
+ u_char vid_vcmr;
+ u_char res3;
+ uint vid_vbcb;
+ uint res4;
+ uint vid_vfcr0;
+ uint vid_vfaa0;
+ uint vid_vfba0;
+ uint vid_vfcr1;
+ uint vid_vfaa1;
+ uint vid_vfba1;
+ u_char res5[0x18];
+} vid823_t;
+
+/* LCD interface. 823 Only.
+*/
+typedef struct lcd {
+ uint lcd_lccr;
+ uint lcd_lchcr;
+ uint lcd_lcvcr;
+ char res1[4];
+ uint lcd_lcfaa;
+ uint lcd_lcfba;
+ char lcd_lcsr;
+ char res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+ u_char i2c_i2mod;
+ char res1[3];
+ u_char i2c_i2add;
+ char res2[3];
+ u_char i2c_i2brg;
+ char res3[3];
+ u_char i2c_i2com;
+ char res4[3];
+ u_char i2c_i2cer;
+ char res5[3];
+ u_char i2c_i2cmr;
+ char res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+ char res1[4];
+ uint sdma_sdar;
+ u_char sdma_sdsr;
+ char res3[3];
+ u_char sdma_sdmr;
+ char res4[3];
+ u_char sdma_idsr1;
+ char res5[3];
+ u_char sdma_idmr1;
+ char res6[3];
+ u_char sdma_idsr2;
+ char res7[3];
+ u_char sdma_idmr2;
+ char res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+ ushort cpic_civr;
+ char res[0xe];
+ uint cpic_cicr;
+ uint cpic_cipr;
+ uint cpic_cimr;
+ uint cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+ ushort iop_padir;
+ ushort iop_papar;
+ ushort iop_paodr;
+ ushort iop_padat;
+ char res1[8];
+ ushort iop_pcdir;
+ ushort iop_pcpar;
+ ushort iop_pcso;
+ ushort iop_pcdat;
+ ushort iop_pcint;
+ char res2[6];
+ ushort iop_pddir;
+ ushort iop_pdpar;
+ char res3[2];
+ ushort iop_pddat;
+ uint utmode;
+ char res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+ ushort cpmt_tgcr;
+ char res1[0xe];
+ ushort cpmt_tmr1;
+ ushort cpmt_tmr2;
+ ushort cpmt_trr1;
+ ushort cpmt_trr2;
+ ushort cpmt_tcr1;
+ ushort cpmt_tcr2;
+ ushort cpmt_tcn1;
+ ushort cpmt_tcn2;
+ ushort cpmt_tmr3;
+ ushort cpmt_tmr4;
+ ushort cpmt_trr3;
+ ushort cpmt_trr4;
+ ushort cpmt_tcr3;
+ ushort cpmt_tcr4;
+ ushort cpmt_tcn3;
+ ushort cpmt_tcn4;
+ ushort cpmt_ter1;
+ ushort cpmt_ter2;
+ ushort cpmt_ter3;
+ ushort cpmt_ter4;
+ char res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc { /* Serial communication channels */
+ uint scc_gsmrl;
+ uint scc_gsmrh;
+ ushort scc_psmr;
+ char res1[2];
+ ushort scc_todr;
+ ushort scc_dsr;
+ ushort scc_scce;
+ char res2[2];
+ ushort scc_sccm;
+ char res3;
+ u_char scc_sccs;
+ char res4[8];
+} scc_t;
+
+typedef struct smc { /* Serial management channels */
+ char res1[2];
+ ushort smc_smcmr;
+ char res2[2];
+ u_char smc_smce;
+ char res3[3];
+ u_char smc_smcm;
+ char res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+ uint fec_addr_low; /* lower 32 bits of station address */
+ ushort fec_addr_high; /* upper 16 bits of station address */
+ ushort res1; /* reserved */
+ uint fec_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_r_des_start; /* beginning of Rx descriptor ring */
+ uint fec_x_des_start; /* beginning of Tx descriptor ring */
+ uint fec_r_buff_size; /* Rx buffer size */
+ uint res2[9]; /* reserved */
+ uint fec_ecntrl; /* ethernet control register */
+ uint fec_ievent; /* interrupt event register */
+ uint fec_imask; /* interrupt mask register */
+ uint fec_ivec; /* interrupt level and vector status */
+ uint fec_r_des_active; /* Rx ring updated flag */
+ uint fec_x_des_active; /* Tx ring updated flag */
+ uint res3[10]; /* reserved */
+ uint fec_mii_data; /* MII data register */
+ uint fec_mii_speed; /* MII speed control register */
+ uint res4[17]; /* reserved */
+ uint fec_r_bound; /* end of RAM (read-only) */
+ uint fec_r_fstart; /* Rx FIFO start address */
+ uint res5[6]; /* reserved */
+ uint fec_x_fstart; /* Tx FIFO start address */
+ uint res6[17]; /* reserved */
+ uint fec_fun_code; /* fec SDMA function code */
+ uint res7[3]; /* reserved */
+ uint fec_r_cntrl; /* Rx control register */
+ uint fec_r_hash; /* Rx hash register */
+ uint res8[14]; /* reserved */
+ uint fec_x_cntrl; /* Tx control register */
+ uint res9[0x1e]; /* reserved */
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+ fec_t fl_un_fec;
+ u_char fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+ /* General control and status registers.
+ */
+ ushort cp_cpcr;
+ u_char res1[2];
+ ushort cp_rccr;
+ u_char res2;
+ u_char cp_rmds;
+ u_char res3[4];
+ ushort cp_cpmcr1;
+ ushort cp_cpmcr2;
+ ushort cp_cpmcr3;
+ ushort cp_cpmcr4;
+ u_char res4[2];
+ ushort cp_rter;
+ u_char res5[2];
+ ushort cp_rtmr;
+ u_char res6[0x14];
+
+ /* Baud rate generators.
+ */
+ uint cp_brgc1;
+ uint cp_brgc2;
+ uint cp_brgc3;
+ uint cp_brgc4;
+
+ /* Serial Communication Channels.
+ */
+ scc_t cp_scc[4];
+
+ /* Serial Management Channels.
+ */
+ smc_t cp_smc[2];
+
+ /* Serial Peripheral Interface.
+ */
+ ushort cp_spmode;
+ u_char res7[4];
+ u_char cp_spie;
+ u_char res8[3];
+ u_char cp_spim;
+ u_char res9[2];
+ u_char cp_spcom;
+ u_char res10[2];
+
+ /* Parallel Interface Port.
+ */
+ u_char res11[2];
+ ushort cp_pipc;
+ u_char res12[2];
+ ushort cp_ptpr;
+ uint cp_pbdir;
+ uint cp_pbpar;
+ u_char res13[2];
+ ushort cp_pbodr;
+ uint cp_pbdat;
+
+ /* Port E - MPC87x/88x only.
+ */
+ uint cp_pedir;
+ uint cp_pepar;
+ uint cp_peso;
+ uint cp_peodr;
+ uint cp_pedat;
+
+ /* Communications Processor Timing Register -
+ Contains RMII Timing for the FECs on MPC87x/88x only.
+ */
+ uint cp_cptr;
+
+ /* Serial Interface and Time Slot Assignment.
+ */
+ uint cp_simode;
+ u_char cp_sigmr;
+ u_char res15;
+ u_char cp_sistr;
+ u_char cp_sicmr;
+ u_char res16[4];
+ uint cp_sicr;
+ uint cp_sirp;
+ u_char res17[0xc];
+
+ /* 256 bytes of MPC823 video controller RAM array.
+ */
+ u_char cp_vcram[0x100];
+ u_char cp_siram[0x200];
+
+ /* The fast ethernet controller is not really part of the CPM,
+ * but it resides in the address space.
+ * The LCD color map is also here.
+ */
+ union fec_lcd fl_un;
+#define cp_fec fl_un.fl_un_fec
+#define lcd_cmap fl_un.fl_un_cmap
+ char res18[0xE00];
+
+ /* The MPC885 family has a second FEC here */
+ fec_t cp_fec2;
+#define cp_fec1 cp_fec /* consistency macro */
+
+ /* Dual Ported RAM follows.
+ * There are many different formats for this memory area
+ * depending upon the devices used and options chosen.
+ * Some processors don't have all of it populated.
+ */
+ u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
+ u_char cp_dparam[0x400]; /* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+ sysconf8xx_t im_siu_conf; /* SIU Configuration */
+ pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
+ memctl8xx_t im_memctl; /* Memory Controller */
+ sit8xx_t im_sit; /* System integration timers */
+ car8xx_t im_clkrst; /* Clocks and reset */
+ sitk8xx_t im_sitk; /* Sys int timer keys */
+ cark8xx_t im_clkrstk; /* Clocks and reset keys */
+ vid823_t im_vid; /* Video (823 only) */
+ lcd823_t im_lcd; /* LCD (823 only) */
+ i2c8xx_t im_i2c; /* I2C control/status */
+ sdma8xx_t im_sdma; /* SDMA control/status */
+ cpic8xx_t im_cpic; /* CPM Interrupt Controller */
+ iop8xx_t im_ioport; /* IO Port control/status */
+ cpmtimer8xx_t im_cpmtimer; /* CPM timers */
+ cpm8xx_t im_cpm; /* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
--- /dev/null
+/*
+ * PowerPC atomic operations
+ */
+
+#ifndef _ASM_PPC_ATOMIC_H_
+#define _ASM_PPC_ATOMIC_H_
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+typedef struct { volatile int counter; } atomic_t;
+#else
+typedef struct { int counter; } atomic_t;
+#endif
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+extern void atomic_clear_mask(unsigned long mask, unsigned long *addr);
+extern void atomic_set_mask(unsigned long mask, unsigned long *addr);
+
+extern __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3\n\
+ add %0,%2,%0\n\
+ stwcx. %0,0,%3\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (a), "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3\n\
+ subf %0,%2,%0\n\
+ stwcx. %0,0,%3\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (a), "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_inc_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%2\n\
+ addic %0,%0,1\n\
+ stwcx. %0,0,%2\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_dec_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%2\n\
+ addic %0,%0,-1\n\
+ stwcx. %0,0,%2\n\
+ bne 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+#define atomic_add(a, v) ((void) atomic_add_return((a), (v)))
+#define atomic_sub(a, v) ((void) atomic_sub_return((a), (v)))
+#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0)
+#define atomic_inc(v) ((void) atomic_inc_return((v)))
+#define atomic_dec(v) ((void) atomic_dec_return((v)))
+#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0)
+
+#endif /* _ASM_PPC_ATOMIC_H_ */
--- /dev/null
+/*
+ * bitops.h: Bit string operations on the ppc
+ */
+
+#ifndef _PPC_BITOPS_H
+#define _PPC_BITOPS_H
+
+#include <linux/config.h>
+#include <asm/byteorder.h>
+
+extern void set_bit(int nr, volatile void *addr);
+extern void clear_bit(int nr, volatile void *addr);
+extern void change_bit(int nr, volatile void *addr);
+extern int test_and_set_bit(int nr, volatile void *addr);
+extern int test_and_clear_bit(int nr, volatile void *addr);
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+/*
+ * Arguably these bit operations don't imply any memory barrier or
+ * SMP ordering, but in fact a lot of drivers expect them to imply
+ * both, since they do on x86 cpus.
+ */
+#ifdef CONFIG_SMP
+#define SMP_WMB "eieio\n"
+#define SMP_MB "\nsync"
+#else
+#define SMP_WMB
+#define SMP_MB
+#endif /* CONFIG_SMP */
+
+#define __INLINE_BITOPS 1
+
+#if __INLINE_BITOPS
+/*
+ * These used to be if'd out here because using : "cc" as a constraint
+ * resulted in errors from egcs. Things may be OK with gcc-2.95.
+ */
+extern __inline__ void set_bit(int nr, volatile void * addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%3\n\
+ or %0,%0,%2\n\
+ stwcx. %0,0,%3\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc" );
+}
+
+extern __inline__ void clear_bit(int nr, volatile void *addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%3\n\
+ andc %0,%0,%2\n\
+ stwcx. %0,0,%3\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+}
+
+extern __inline__ void change_bit(int nr, volatile void *addr)
+{
+ unsigned long old;
+ unsigned long mask = 1 << (nr & 0x1f);
+ unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%3\n\
+ xor %0,%0,%2\n\
+ stwcx. %0,0,%3\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+}
+
+extern __inline__ int test_and_set_bit(int nr, volatile void *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%4\n\
+ or %1,%0,%3\n\
+ stwcx. %1,0,%4\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+
+ return (old & mask) != 0;
+}
+
+extern __inline__ int test_and_clear_bit(int nr, volatile void *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%4\n\
+ andc %1,%0,%3\n\
+ stwcx. %1,0,%4\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+
+ return (old & mask) != 0;
+}
+
+extern __inline__ int test_and_change_bit(int nr, volatile void *addr)
+{
+ unsigned int old, t;
+ unsigned int mask = 1 << (nr & 0x1f);
+ volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
+
+ __asm__ __volatile__(SMP_WMB "\
+1: lwarx %0,0,%4\n\
+ xor %1,%0,%3\n\
+ stwcx. %1,0,%4\n\
+ bne 1b"
+ SMP_MB
+ : "=&r" (old), "=&r" (t), "=m" (*p)
+ : "r" (mask), "r" (p), "m" (*p)
+ : "cc");
+
+ return (old & mask) != 0;
+}
+#endif /* __INLINE_BITOPS */
+
+extern __inline__ int test_bit(int nr, __const__ volatile void *addr)
+{
+ __const__ unsigned int *p = (__const__ unsigned int *) addr;
+
+ return ((p[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
+}
+
+/* Return the bit position of the most significant 1 bit in a word */
+/* - the result is undefined when x == 0 */
+extern __inline__ int __ilog2(unsigned int x)
+{
+ int lz;
+
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+ return 31 - lz;
+}
+
+extern __inline__ int ffz(unsigned int x)
+{
+ if ((x = ~x) == 0)
+ return 32;
+ return __ilog2(x & -x);
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ *
+ * On powerpc, __ilog2(0) returns -1, but this is not safe in general
+ */
+static __inline__ int fls(unsigned int x)
+{
+ return __ilog2(x) + 1;
+}
+#define PLATFORM_FLS
+
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#if BITS_PER_LONG == 32
+static inline int fls64(__u64 x)
+{
+ __u32 h = x >> 32;
+ if (h)
+ return fls(h) + 32;
+ return fls(x);
+}
+#elif BITS_PER_LONG == 64
+static inline int fls64(__u64 x)
+{
+ if (x == 0)
+ return 0;
+ return __ilog2(x) + 1;
+}
+#else
+#error BITS_PER_LONG not 32 or 64
+#endif
+
+static inline int __ilog2_u64(u64 n)
+{
+ return fls64(n) - 1;
+}
+
+static inline int ffs64(u64 x)
+{
+ return __ilog2_u64(x & -x) + 1ull;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+extern __inline__ int ffs(int x)
+{
+ return __ilog2(x & -x) + 1;
+}
+#define PLATFORM_FFS
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+#define find_first_zero_bit(addr, size) \
+ find_next_zero_bit((addr), (size), 0)
+
+extern __inline__ unsigned long find_next_zero_bit(void * addr,
+ unsigned long size, unsigned long offset)
+{
+ unsigned int * p = ((unsigned int *) addr) + (offset >> 5);
+ unsigned int result = offset & ~31UL;
+ unsigned int tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = *p++;
+ tmp |= ~0UL >> (32-offset);
+ if (size < 32)
+ goto found_first;
+ if (tmp != ~0U)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size >= 32) {
+ if ((tmp = *p++) != ~0U)
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+found_first:
+ tmp |= ~0UL << size;
+found_middle:
+ return result + ffz(tmp);
+}
+
+
+#define _EXT2_HAVE_ASM_BITOPS_
+
+#ifdef __KERNEL__
+/*
+ * test_and_{set,clear}_bit guarantee atomicity without
+ * disabling interrupts.
+ */
+#define ext2_set_bit(nr, addr) test_and_set_bit((nr) ^ 0x18, addr)
+#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr) ^ 0x18, addr)
+
+#else
+extern __inline__ int ext2_set_bit(int nr, void * addr)
+{
+ int mask;
+ unsigned char *ADDR = (unsigned char *) addr;
+ int oldbit;
+
+ ADDR += nr >> 3;
+ mask = 1 << (nr & 0x07);
+ oldbit = (*ADDR & mask) ? 1 : 0;
+ *ADDR |= mask;
+ return oldbit;
+}
+
+extern __inline__ int ext2_clear_bit(int nr, void * addr)
+{
+ int mask;
+ unsigned char *ADDR = (unsigned char *) addr;
+ int oldbit;
+
+ ADDR += nr >> 3;
+ mask = 1 << (nr & 0x07);
+ oldbit = (*ADDR & mask) ? 1 : 0;
+ *ADDR = *ADDR & ~mask;
+ return oldbit;
+}
+#endif /* __KERNEL__ */
+
+extern __inline__ int ext2_test_bit(int nr, __const__ void * addr)
+{
+ __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
+
+ return (ADDR[nr >> 3] >> (nr & 7)) & 1;
+}
+
+/*
+ * This implementation of ext2_find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
+ */
+
+#define ext2_find_first_zero_bit(addr, size) \
+ ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
+ unsigned long size, unsigned long offset)
+{
+ unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+ unsigned int result = offset & ~31UL;
+ unsigned int tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset &= 31UL;
+ if (offset) {
+ tmp = cpu_to_le32p(p++);
+ tmp |= ~0UL >> (32-offset);
+ if (size < 32)
+ goto found_first;
+ if (tmp != ~0U)
+ goto found_middle;
+ size -= 32;
+ result += 32;
+ }
+ while (size >= 32) {
+ if ((tmp = cpu_to_le32p(p++)) != ~0U)
+ goto found_middle;
+ result += 32;
+ size -= 32;
+ }
+ if (!size)
+ return result;
+ tmp = cpu_to_le32p(p);
+found_first:
+ tmp |= ~0U << size;
+found_middle:
+ return result + ffz(tmp);
+}
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
+#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size)
+
+#endif /* _PPC_BITOPS_H */
--- /dev/null
+#ifndef _PPC_BYTEORDER_H
+#define _PPC_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+extern __inline__ unsigned ld_le16(const volatile unsigned short *addr)
+{
+ unsigned val;
+
+ __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+ return val;
+}
+
+extern __inline__ void st_le16(volatile unsigned short *addr, const unsigned val)
+{
+ __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+extern __inline__ unsigned ld_le32(const volatile unsigned *addr)
+{
+ unsigned val;
+
+ __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+ return val;
+}
+
+extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val)
+{
+ __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+/* alas, egcs sounds like it has a bug in this code that doesn't use the
+ inline asm correctly, and can cause file corruption. Until I hear that
+ it's fixed, I can live without the extra speed. I hope. */
+#if !(__GNUC__ >= 2 && __GNUC_MINOR__ >= 90)
+#if 0
+# define __arch_swab16(x) ld_le16(&x)
+# define __arch_swab32(x) ld_le32(&x)
+#else
+static __inline__ __attribute__((const)) __u16 ___arch__swab16(__u16 value)
+{
+ __u16 result;
+
+ __asm__("rlwimi %0,%1,8,16,23"
+ : "=r" (result)
+ : "r" (value), "0" (value >> 8));
+ return result;
+}
+
+static __inline__ __attribute__((const)) __u32 ___arch__swab32(__u32 value)
+{
+ __u32 result;
+
+ __asm__("rlwimi %0,%1,24,16,23\n\t"
+ "rlwimi %0,%1,8,8,15\n\t"
+ "rlwimi %0,%1,24,0,7"
+ : "=r" (result)
+ : "r" (value), "0" (value >> 24));
+ return result;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+#endif /* 0 */
+
+#endif
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __GNUC__ */
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+#define __BYTEORDER_HAS_U64__
+#endif
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _PPC_BYTEORDER_H */
--- /dev/null
+/*
+ * include/asm-ppc/cache.h
+ */
+#ifndef __ARCH_PPC_CACHE_H
+#define __ARCH_PPC_CACHE_H
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#define L1_CACHE_SHIFT 4
+#elif defined(CONFIG_PPC64BRIDGE)
+#define L1_CACHE_SHIFT 7
+#elif defined(CONFIG_E500MC)
+#define L1_CACHE_SHIFT 6
+#else
+#define L1_CACHE_SHIFT 5
+#endif
+
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+/*
+ * For compatibility reasons support the CONFIG_SYS_CACHELINE_SIZE too
+ */
+#ifndef CONFIG_SYS_CACHELINE_SIZE
+#define CONFIG_SYS_CACHELINE_SIZE L1_CACHE_BYTES
+#endif
+
+#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define L1_CACHE_PAGES 8
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#ifdef MODULE
+#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
+#else
+#define __cacheline_aligned \
+ __attribute__((__aligned__(L1_CACHE_BYTES), \
+ __section__(".data.cacheline_aligned")))
+#endif
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache(void);
+extern void invalidate_dcache(void);
+extern void invalidate_icache(void);
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+extern void unlock_ram_in_cache(void);
+#endif /* CONFIG_SYS_INIT_RAM_LOCK */
+#endif /* __ASSEMBLY__ */
+
+/* prep registers for L2 */
+#define CACHECRBA 0x80000823 /* Cache configuration register address */
+#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB 0x00 /* 512KB */
+#define L2CACHE_256KB 0x01 /* 256KB */
+#define L2CACHE_1MB 0x02 /* 1MB */
+#define L2CACHE_NONE 0x03 /* NONE */
+#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
+
+#ifdef CONFIG_8xx
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define IC_CST 560 /* Instruction cache control/status */
+#define IC_ADR 561 /* Address needed for some commands */
+#define IC_DAT 562 /* Read-only data register */
+#define DC_CST 568 /* Data cache control/status */
+#define DC_ADR 569 /* Address needed for some commands */
+#define DC_DAT 570 /* Read-only data register */
+
+/* Commands. Only the first few are available to the instruction cache.
+*/
+#define IDC_ENABLE 0x02000000 /* Cache enable */
+#define IDC_DISABLE 0x04000000 /* Cache disable */
+#define IDC_LDLCK 0x06000000 /* Load and lock */
+#define IDC_UNLINE 0x08000000 /* Unlock line */
+#define IDC_UNALL 0x0a000000 /* Unlock all */
+#define IDC_INVALL 0x0c000000 /* Invalidate all */
+
+#define DC_FLINE 0x0e000000 /* Flush data cache line */
+#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
+#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
+#define DC_SLES 0x05000000 /* Set little endian swap mode */
+#define DC_CLES 0x07000000 /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED 0x80000000 /* Cache is enabled */
+#define IDC_CERR1 0x00200000 /* Cache error 1 */
+#define IDC_CERR2 0x00100000 /* Cache error 2 */
+#define IDC_CERR3 0x00080000 /* Cache error 3 */
+
+#define DC_DFWT 0x40000000 /* Data cache is forced write through */
+#define DC_LES 0x20000000 /* Caches are little endian mode */
+#endif /* CONFIG_8xx */
+
+#endif
--- /dev/null
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_CONFIG_H_
+#define _ASM_CONFIG_H_
+
+#define CONFIG_LMB
+
+#ifndef CONFIG_MAX_MEM_MAPPED
+#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+#else
+#define CONFIG_MAX_MEM_MAPPED (256 << 20)
+#endif
+#endif
+
+/* Check if boards need to enable FSL DMA engine for SDRAM init */
+#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
+#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
+ ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
+ !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
+#define CONFIG_FSL_DMA
+#endif
+#endif
+
+#if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \
+ defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
+ defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
+#define CONFIG_MAX_CPUS 2
+#elif defined(CONFIG_PPC_P4080)
+#define CONFIG_MAX_CPUS 8
+#else
+#define CONFIG_MAX_CPUS 1
+#endif
+
+/*
+ * Provide a default boot page translation virtual address that lines up with
+ * Freescale's default e500 reset page.
+ */
+#if (defined(CONFIG_E500) && defined(CONFIG_MP))
+#ifndef CONFIG_BPTR_VIRT_ADDR
+#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
+#endif
+#endif
+
+/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
+#if defined(CONFIG_TSEC_ENET) && \
+ (defined(CONFIG_P1020) || defined(CONFIG_P1011))
+#define CONFIG_TSECV2
+#endif
+
+/* Number of TLB CAM entries we have on FSL Book-E chips */
+#if defined(CONFIG_E500MC)
+#define CONFIG_SYS_NUM_TLBCAMS 64
+#elif defined(CONFIG_E500)
+#define CONFIG_SYS_NUM_TLBCAMS 16
+#endif
+
+/* Relocation to SDRAM works on all PPC boards */
+#define CONFIG_RELOC_FIXUP_WORKS
+
+#endif /* _ASM_CONFIG_H_ */
--- /dev/null
+
+/*
+ * MPC8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the MPC8260 internal
+ * memory map. See immap.h for details.
+ */
+#ifndef __CPM_82XX__
+#define __CPM_82XX__
+
+#include <asm/immap_8260.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((uint)0x80000000)
+#define CPM_CR_PAGE ((uint)0x7c000000)
+#define CPM_CR_SBLOCK ((uint)0x03e00000)
+#define CPM_CR_FLG ((uint)0x00010000)
+#define CPM_CR_MCN ((uint)0x00003fc0)
+#define CPM_CR_OPCODE ((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK (0x04)
+#define CPM_CR_SCC2_SBLOCK (0x05)
+#define CPM_CR_SCC3_SBLOCK (0x06)
+#define CPM_CR_SCC4_SBLOCK (0x07)
+#define CPM_CR_SMC1_SBLOCK (0x08)
+#define CPM_CR_SMC2_SBLOCK (0x09)
+#define CPM_CR_SPI_SBLOCK (0x0a)
+#define CPM_CR_I2C_SBLOCK (0x0b)
+#define CPM_CR_TIMER_SBLOCK (0x0f)
+#define CPM_CR_RAND_SBLOCK (0x0e)
+#define CPM_CR_FCC1_SBLOCK (0x10)
+#define CPM_CR_FCC2_SBLOCK (0x11)
+#define CPM_CR_FCC3_SBLOCK (0x12)
+#define CPM_CR_IDMA1_SBLOCK (0x14)
+#define CPM_CR_IDMA2_SBLOCK (0x15)
+#define CPM_CR_IDMA3_SBLOCK (0x16)
+#define CPM_CR_IDMA4_SBLOCK (0x17)
+#define CPM_CR_MCC1_SBLOCK (0x1c)
+
+#define CPM_CR_SCC1_PAGE (0x00)
+#define CPM_CR_SCC2_PAGE (0x01)
+#define CPM_CR_SCC3_PAGE (0x02)
+#define CPM_CR_SCC4_PAGE (0x03)
+#define CPM_CR_SMC1_PAGE (0x07)
+#define CPM_CR_SMC2_PAGE (0x08)
+#define CPM_CR_SPI_PAGE (0x09)
+#define CPM_CR_I2C_PAGE (0x0a)
+#define CPM_CR_TIMER_PAGE (0x0a)
+#define CPM_CR_RAND_PAGE (0x0a)
+#define CPM_CR_FCC1_PAGE (0x04)
+#define CPM_CR_FCC2_PAGE (0x05)
+#define CPM_CR_FCC3_PAGE (0x06)
+#define CPM_CR_IDMA1_PAGE (0x07)
+#define CPM_CR_IDMA2_PAGE (0x08)
+#define CPM_CR_IDMA3_PAGE (0x09)
+#define CPM_CR_IDMA4_PAGE (0x0a)
+#define CPM_CR_MCC1_PAGE (0x07)
+#define CPM_CR_MCC2_PAGE (0x08)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* Dual Port RAM addresses. The first 16K is available for almost
+ * any CPM use, so we put the BDs there. The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that. All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE ((uint)128)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+#ifndef CONFIG_MPC8272_FAMILY
+#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
+#else /* 8247/48/71/72 */
+#define CPM_DATAONLY_SIZE ((uint)(4 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
+#endif /* !CONFIG_MPC8272_FAMILY */
+
+/* The number of pages of host memory we allocate for CPM. This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES 2
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8260_t *cpmp; /* Pointer to comm processor */
+uint m8260_cpm_dpalloc(uint size, uint align);
+uint m8260_cpm_hostalloc(uint size, uint align);
+void m8260_cpm_setbrg(uint brg, uint rate);
+void m8260_cpm_fastbrg(uint brg, uint rate, int div16);
+void m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
+#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
+#else
+#define CPM_POST_WORD_ADDR CONFIG_SYS_CPM_POST_WORD_ADDR
+#endif
+
+#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
+#define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
+#else
+#define CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_BOOTCOUNT_ADDR
+#endif
+
+#define PROFF_SCC1 ((uint)0x8000)
+#define PROFF_SCC2 ((uint)0x8100)
+#define PROFF_SCC3 ((uint)0x8200)
+#define PROFF_SCC4 ((uint)0x8300)
+#define PROFF_FCC1 ((uint)0x8400)
+#define PROFF_FCC2 ((uint)0x8500)
+#define PROFF_FCC3 ((uint)0x8600)
+#define PROFF_MCC1 ((uint)0x8700)
+#define PROFF_SMC1_BASE ((uint)0x87fc)
+#define PROFF_IDMA1_BASE ((uint)0x87fe)
+#define PROFF_MCC2 ((uint)0x8800)
+#define PROFF_SMC2_BASE ((uint)0x88fc)
+#define PROFF_IDMA2_BASE ((uint)0x88fe)
+#define PROFF_SPI_BASE ((uint)0x89fc)
+#define PROFF_IDMA3_BASE ((uint)0x89fe)
+#define PROFF_TIMERS ((uint)0x8ae0)
+#define PROFF_REVNUM ((uint)0x8af0)
+#define PROFF_RAND ((uint)0x8af8)
+#define PROFF_I2C_BASE ((uint)0x8afc)
+#define PROFF_IDMA4_BASE ((uint)0x8afe)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1 (0)
+#define PROFF_SMC2 (64)
+#define PROFF_SPI ((16*1024) - 128)
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+ uint smc_stmp; /* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_TXE ((unsigned char)0x10)
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
+#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* SCC as HDLC controller - taken from commproc.h
+ */
+typedef struct scc_hdlc {
+ sccp_t sh_genscc;
+ /*
+ * HDLC specific parameter RAM
+ */
+ uchar res[4]; /* reserved */
+ ulong sh_cmask; /* CRC constant */
+ ulong sh_cpres; /* CRC preset */
+ ushort sh_disfc; /* discarded frame counter */
+ ushort sh_crcec; /* CRC error counter */
+ ushort sh_abtsc; /* abort sequence counter */
+ ushort sh_nmarc; /* nonmatching address rx cnt */
+ ushort sh_retrc; /* frame retransmission cnt */
+ ushort sh_mflr; /* maximum frame length reg */
+ ushort sh_maxcnt; /* maximum length counter */
+ ushort sh_rfthr; /* received frames threshold */
+ ushort sh_rfcnt; /* received frames count */
+ ushort sh_hmask; /* user defined frm addr mask */
+ ushort sh_haddr1; /* user defined frm address 1 */
+ ushort sh_haddr2; /* user defined frm address 2 */
+ ushort sh_haddr3; /* user defined frm address 3 */
+ ushort sh_haddr4; /* user defined frm address 4 */
+ ushort tmp; /* temp */
+ ushort tmp_mb; /* temp */
+} scc_hdlc_t;
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
+#define FCC_GFMR_TCI ((uint)0x20000000)
+#define FCC_GFMR_TRX ((uint)0x10000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_CDP ((uint)0x04000000)
+#define FCC_GFMR_CTSP ((uint)0x02000000)
+#define FCC_GFMR_CDS ((uint)0x01000000)
+#define FCC_GFMR_CTSS ((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
+#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
+#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
+#define FCC_GFMR_RTSM ((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
+#define FCC_GFMR_REVD ((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
+#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
+#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
+#define FCC_GFMR_ENR ((uint)0x00000020)
+#define FCC_GFMR_ENT ((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+ ushort fcc_riptr; /* Rx Internal temp pointer */
+ ushort fcc_tiptr; /* Tx Internal temp pointer */
+ ushort fcc_res1;
+ ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
+ uint fcc_rstate; /* Upper byte is Func code, must be set */
+ uint fcc_rbase; /* Receive BD base */
+ ushort fcc_rbdstat; /* RxBD status */
+ ushort fcc_rbdlen; /* RxBD down counter */
+ uint fcc_rdptr; /* RxBD internal data pointer */
+ uint fcc_tstate; /* Upper byte is Func code, must be set */
+ uint fcc_tbase; /* Transmit BD base */
+ ushort fcc_tbdstat; /* TxBD status */
+ ushort fcc_tbdlen; /* TxBD down counter */
+ uint fcc_tdptr; /* TxBD internal data pointer */
+ uint fcc_rbptr; /* Rx BD Internal buf pointer */
+ uint fcc_tbptr; /* Tx BD Internal buf pointer */
+ uint fcc_rcrc; /* Rx temp CRC */
+ uint fcc_res2;
+ uint fcc_tcrc; /* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+ fccp_t fen_genfcc;
+ uint fen_statbuf; /* Internal status buffer */
+ uint fen_camptr; /* CAM address */
+ uint fen_cmask; /* Constant mask for CRC */
+ uint fen_cpres; /* Preset CRC */
+ uint fen_crcec; /* CRC Error counter */
+ uint fen_alec; /* alignment error counter */
+ uint fen_disfc; /* discard frame counter */
+ ushort fen_retlim; /* Retry limit */
+ ushort fen_retcnt; /* Retry counter */
+ ushort fen_pper; /* Persistence */
+ ushort fen_boffcnt; /* backoff counter */
+ uint fen_gaddrh; /* Group address filter, high 32-bits */
+ uint fen_gaddrl; /* Group address filter, low 32-bits */
+ ushort fen_tfcstat; /* out of sequence TxBD */
+ ushort fen_tfclen;
+ uint fen_tfcptr;
+ ushort fen_mflr; /* Maximum frame length (1518) */
+ ushort fen_paddrh; /* MAC address */
+ ushort fen_paddrm;
+ ushort fen_paddrl;
+ ushort fen_ibdcount; /* Internal BD counter */
+ ushort fen_idbstart; /* Internal BD start pointer */
+ ushort fen_ibdend; /* Internal BD end pointer */
+ ushort fen_txlen; /* Internal Tx frame length counter */
+ uint fen_ibdbase[8]; /* Internal use */
+ uint fen_iaddrh; /* Individual address filter */
+ uint fen_iaddrl;
+ ushort fen_minflr; /* Minimum frame length (64) */
+ ushort fen_taddrh; /* Filter transfer MAC address */
+ ushort fen_taddrm;
+ ushort fen_taddrl;
+ ushort fen_padptr; /* Pointer to pad byte buffer */
+ ushort fen_cftype; /* control frame type */
+ ushort fen_cfrange; /* control frame range */
+ ushort fen_maxb; /* maximum BD count */
+ ushort fen_maxd1; /* Max DMA1 length (1520) */
+ ushort fen_maxd2; /* Max DMA2 length (1520) */
+ ushort fen_maxd; /* internal max DMA count */
+ ushort fen_dmacnt; /* internal DMA counter */
+ uint fen_octc; /* Total octect counter */
+ uint fen_colc; /* Total collision counter */
+ uint fen_broc; /* Total broadcast packet counter */
+ uint fen_mulc; /* Total multicast packet count */
+ uint fen_uspc; /* Total packets < 64 bytes */
+ uint fen_frgc; /* Total packets < 64 bytes with errors */
+ uint fen_ospc; /* Total packets > 1518 */
+ uint fen_jbrc; /* Total packets > 1518 with errors */
+ uint fen_p64c; /* Total packets == 64 bytes */
+ uint fen_p65c; /* Total packets 64 < bytes <= 127 */
+ uint fen_p128c; /* Total packets 127 < bytes <= 255 */
+ uint fen_p256c; /* Total packets 256 < bytes <= 511 */
+ uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
+ uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
+ uint fen_cambuf; /* Internal CAM buffer poiner */
+ ushort fen_rfthr; /* Received frames threshold */
+ ushort fen_rfcnt; /* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
+#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
+#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
+#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
+#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
+#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
+#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
+#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
+#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
+#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
+#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
+#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
+#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
+#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
+#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res; /* Tx temp. */
+ uint spi_res1[4]; /* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x) ((x) &0xF)
+
+/* SPI Event/Mask register.
+*/
+#define SPI_EMASK 0x37 /* Event Mask */
+#define SPI_MME 0x20 /* Multi-Master Error */
+#define SPI_TXE 0x10 /* Transmit Error */
+#define SPI_BSY 0x04 /* Busy */
+#define SPI_TXB 0x02 /* Tx Buffer Empty */
+#define SPI_RXB 0x01 /* RX Buffer full/closed */
+
+#define SPI_STR 0x80 /* SPCOM: Start transmit */
+
+#define SPI_EB ((u_char)0x10) /* big endian byte order */
+
+#define BD_IIC_START ((ushort)0x0400)
+
+#endif /* __CPM_82XX__ */
--- /dev/null
+
+/*
+ * MPC85xx Communication Processor Module
+ * Copyright (c) 2003,Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * MPC8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the MPC8260 internal
+ * memory map. See immap.h for details.
+ */
+#ifndef __CPM_85XX__
+#define __CPM_85XX__
+
+#include <asm/immap_85xx.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((uint)0x80000000)
+#define CPM_CR_PAGE ((uint)0x7c000000)
+#define CPM_CR_SBLOCK ((uint)0x03e00000)
+#define CPM_CR_FLG ((uint)0x00010000)
+#define CPM_CR_MCN ((uint)0x00003fc0)
+#define CPM_CR_OPCODE ((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK (0x04)
+#define CPM_CR_SCC2_SBLOCK (0x05)
+#define CPM_CR_SCC3_SBLOCK (0x06)
+#define CPM_CR_SCC4_SBLOCK (0x07)
+#define CPM_CR_SMC1_SBLOCK (0x08)
+#define CPM_CR_SMC2_SBLOCK (0x09)
+#define CPM_CR_SPI_SBLOCK (0x0a)
+#define CPM_CR_I2C_SBLOCK (0x0b)
+#define CPM_CR_TIMER_SBLOCK (0x0f)
+#define CPM_CR_RAND_SBLOCK (0x0e)
+#define CPM_CR_FCC1_SBLOCK (0x10)
+#define CPM_CR_FCC2_SBLOCK (0x11)
+#define CPM_CR_FCC3_SBLOCK (0x12)
+#define CPM_CR_MCC1_SBLOCK (0x1c)
+
+#define CPM_CR_SCC1_PAGE (0x00)
+#define CPM_CR_SCC2_PAGE (0x01)
+#define CPM_CR_SCC3_PAGE (0x02)
+#define CPM_CR_SCC4_PAGE (0x03)
+#define CPM_CR_SPI_PAGE (0x09)
+#define CPM_CR_I2C_PAGE (0x0a)
+#define CPM_CR_TIMER_PAGE (0x0a)
+#define CPM_CR_RAND_PAGE (0x0a)
+#define CPM_CR_FCC1_PAGE (0x04)
+#define CPM_CR_FCC2_PAGE (0x05)
+#define CPM_CR_FCC3_PAGE (0x06)
+#define CPM_CR_MCC1_PAGE (0x07)
+#define CPM_CR_MCC2_PAGE (0x08)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* Dual Port RAM addresses. The first 16K is available for almost
+ * any CPM use, so we put the BDs there. The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that. All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE ((uint)128)
+#define CPM_DP_NOSPACE ((uint)0x7FFFFFFF)
+#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
+#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+#else /* MPC8540, MPC8560 */
+#define CPM_FCC_SPECIAL_BASE ((uint)0x0000B000)
+#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
+#endif
+
+/* The number of pages of host memory we allocate for CPM. This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES 2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+/*extern cpm8560_t *cpmp; Pointer to comm processor */
+uint m8560_cpm_dpalloc(uint size, uint align);
+uint m8560_cpm_hostalloc(uint size, uint align);
+void m8560_cpm_setbrg(uint brg, uint rate);
+void m8560_cpm_fastbrg(uint brg, uint rate, int div16);
+void m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
+#define PROFF_SCC1 ((uint)0x8000)
+#define PROFF_SCC2 ((uint)0x8100)
+#define PROFF_SCC3 ((uint)0x8200)
+#define PROFF_SCC4 ((uint)0x8300)
+#define PROFF_FCC1 ((uint)0x8400)
+#define PROFF_FCC2 ((uint)0x8500)
+#define PROFF_FCC3 ((uint)0x8600)
+#define PROFF_MCC1 ((uint)0x8700)
+#define PROFF_MCC2 ((uint)0x8800)
+#define PROFF_SPI_BASE ((uint)0x89fc)
+#define PROFF_TIMERS ((uint)0x8ae0)
+#define PROFF_REVNUM ((uint)0x8af0)
+#define PROFF_RAND ((uint)0x8af8)
+#define PROFF_I2C_BASE ((uint)0x8afc)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
+#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
+#define FCC_GFMR_TCI ((uint)0x20000000)
+#define FCC_GFMR_TRX ((uint)0x10000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_CDP ((uint)0x04000000)
+#define FCC_GFMR_CTSP ((uint)0x02000000)
+#define FCC_GFMR_CDS ((uint)0x01000000)
+#define FCC_GFMR_CTSS ((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
+#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
+#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
+#define FCC_GFMR_RTSM ((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
+#define FCC_GFMR_REVD ((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
+#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
+#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
+#define FCC_GFMR_ENR ((uint)0x00000020)
+#define FCC_GFMR_ENT ((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+ ushort fcc_riptr; /* Rx Internal temp pointer */
+ ushort fcc_tiptr; /* Tx Internal temp pointer */
+ ushort fcc_res1;
+ ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
+ uint fcc_rstate; /* Upper byte is Func code, must be set */
+ uint fcc_rbase; /* Receive BD base */
+ ushort fcc_rbdstat; /* RxBD status */
+ ushort fcc_rbdlen; /* RxBD down counter */
+ uint fcc_rdptr; /* RxBD internal data pointer */
+ uint fcc_tstate; /* Upper byte is Func code, must be set */
+ uint fcc_tbase; /* Transmit BD base */
+ ushort fcc_tbdstat; /* TxBD status */
+ ushort fcc_tbdlen; /* TxBD down counter */
+ uint fcc_tdptr; /* TxBD internal data pointer */
+ uint fcc_rbptr; /* Rx BD Internal buf pointer */
+ uint fcc_tbptr; /* Tx BD Internal buf pointer */
+ uint fcc_rcrc; /* Rx temp CRC */
+ uint fcc_res2;
+ uint fcc_tcrc; /* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+ fccp_t fen_genfcc;
+ uint fen_statbuf; /* Internal status buffer */
+ uint fen_camptr; /* CAM address */
+ uint fen_cmask; /* Constant mask for CRC */
+ uint fen_cpres; /* Preset CRC */
+ uint fen_crcec; /* CRC Error counter */
+ uint fen_alec; /* alignment error counter */
+ uint fen_disfc; /* discard frame counter */
+ ushort fen_retlim; /* Retry limit */
+ ushort fen_retcnt; /* Retry counter */
+ ushort fen_pper; /* Persistence */
+ ushort fen_boffcnt; /* backoff counter */
+ uint fen_gaddrh; /* Group address filter, high 32-bits */
+ uint fen_gaddrl; /* Group address filter, low 32-bits */
+ ushort fen_tfcstat; /* out of sequence TxBD */
+ ushort fen_tfclen;
+ uint fen_tfcptr;
+ ushort fen_mflr; /* Maximum frame length (1518) */
+ ushort fen_paddrh; /* MAC address */
+ ushort fen_paddrm;
+ ushort fen_paddrl;
+ ushort fen_ibdcount; /* Internal BD counter */
+ ushort fen_ibdstart; /* Internal BD start pointer */
+ ushort fen_ibdend; /* Internal BD end pointer */
+ ushort fen_txlen; /* Internal Tx frame length counter */
+ uint fen_ibdbase[8]; /* Internal use */
+ uint fen_iaddrh; /* Individual address filter */
+ uint fen_iaddrl;
+ ushort fen_minflr; /* Minimum frame length (64) */
+ ushort fen_taddrh; /* Filter transfer MAC address */
+ ushort fen_taddrm;
+ ushort fen_taddrl;
+ ushort fen_padptr; /* Pointer to pad byte buffer */
+ ushort fen_cftype; /* control frame type */
+ ushort fen_cfrange; /* control frame range */
+ ushort fen_maxb; /* maximum BD count */
+ ushort fen_maxd1; /* Max DMA1 length (1520) */
+ ushort fen_maxd2; /* Max DMA2 length (1520) */
+ ushort fen_maxd; /* internal max DMA count */
+ ushort fen_dmacnt; /* internal DMA counter */
+ uint fen_octc; /* Total octect counter */
+ uint fen_colc; /* Total collision counter */
+ uint fen_broc; /* Total broadcast packet counter */
+ uint fen_mulc; /* Total multicast packet count */
+ uint fen_uspc; /* Total packets < 64 bytes */
+ uint fen_frgc; /* Total packets < 64 bytes with errors */
+ uint fen_ospc; /* Total packets > 1518 */
+ uint fen_jbrc; /* Total packets > 1518 with errors */
+ uint fen_p64c; /* Total packets == 64 bytes */
+ uint fen_p65c; /* Total packets 64 < bytes <= 127 */
+ uint fen_p128c; /* Total packets 127 < bytes <= 255 */
+ uint fen_p256c; /* Total packets 256 < bytes <= 511 */
+ uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
+ uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
+ uint fen_cambuf; /* Internal CAM buffer poiner */
+ ushort fen_rfthr; /* Received frames threshold */
+ ushort fen_rfcnt; /* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
+#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
+#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
+#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
+#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
+#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
+#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
+#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
+#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
+#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
+#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
+#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
+#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
+#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res; /* Tx temp. */
+ uint spi_res1[4]; /* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x) ((x) &0xF)
+
+#define SPI_EB ((u_char)0x10) /* big endian byte order */
+
+#define BD_IIC_START ((ushort)0x0400)
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register 15-12
+ */
+#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
+#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
+#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
+#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register 15-14
+ */
+#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
+#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
+#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
+#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
+#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
+#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
+#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
+#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
+#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
+
+#endif /* __CPM_85XX__ */
--- /dev/null
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ * Liberty Eran (liberty@freescale.com)
+ */
+
+#ifndef __E300_H__
+#define __E300_H__
+
+#define PVR_E300C1 0x80830000
+#define PVR_E300C2 0x80840000
+#define PVR_E300C3 0x80850000
+#define PVR_E300C4 0x80860000
+
+/*
+ * Hardware Implementation-Dependent Register 0 (HID0)
+ */
+
+/* #define HID0 1008 already defined in processor.h */
+#define HID0_MASK_MACHINE_CHECK 0x00000000
+#define HID0_ENABLE_MACHINE_CHECK 0x80000000
+
+#define HID0_DISABLE_CACHE_PARITY 0x00000000
+#define HID0_ENABLE_CACHE_PARITY 0x40000000
+
+#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
+
+#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_DATE_PARITY 0x10000000
+
+#define HID0_CORE_CLK_OUT 0x00000000
+#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
+
+#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
+#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
+
+#define HID0_DISABLE_DOSE_MODE 0x00000000
+#define HID0_ENABLE_DOSE_MODE 0x00800000
+
+#define HID0_DISABLE_NAP_MODE 0x00000000
+#define HID0_ENABLE_NAP_MODE 0x00400000
+
+#define HID0_DISABLE_SLEEP_MODE 0x00000000
+#define HID0_ENABLE_SLEEP_MODE 0x00200000
+
+#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
+#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
+
+#define HID0_SOFT_RESET 0x00010000
+
+#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
+#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
+
+#define HID0_DISABLE_DATA_CACHE 0x00000000
+#define HID0_ENABLE_DATA_CACHE 0x00004000
+
+#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
+
+#define HID0_LOCK_DATA_CACHE 0x00001000
+
+#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
+
+#define HID0_INVALIDATE_DATA_CACHE 0x00000400
+
+#define HID0_DISABLE_M_BIT 0x00000000
+#define HID0_ENABLE_M_BIT 0x00000080
+
+#define HID0_FBIOB 0x00000010
+
+#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
+#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
+
+#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
+#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
+
+/*
+ * Hardware Implementation-Dependent Register 2 (HID2)
+ */
+#define HID2 1011
+
+#define HID2_LET 0x08000000
+#define HID2_HBE 0x00040000
+#define HID2_IWLCK_000 0x00000000 /* no ways locked */
+#define HID2_IWLCK_001 0x00002000 /* way 0 locked */
+#define HID2_IWLCK_010 0x00004000 /* way 0 through way 1 locked */
+#define HID2_IWLCK_011 0x00006000 /* way 0 through way 2 locked */
+#define HID2_IWLCK_100 0x00008000 /* way 0 through way 3 locked */
+#define HID2_IWLCK_101 0x0000A000 /* way 0 through way 4 locked */
+#define HID2_IWLCK_110 0x0000C000 /* way 0 through way 5 locked */
+
+#endif /* __E300_H__ */
--- /dev/null
+#include <asm-generic/errno.h>
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef DDR2_DIMM_PARAMS_H
+#define DDR2_DIMM_PARAMS_H
+
+/* Parameters for a DDR2 dimm computed from the SPD */
+typedef struct dimm_params_s {
+
+ /* DIMM organization parameters */
+ char mpart[19]; /* guaranteed null terminated */
+
+ unsigned int n_ranks;
+ unsigned long long rank_density;
+ unsigned long long capacity;
+ unsigned int data_width;
+ unsigned int primary_sdram_width;
+ unsigned int ec_sdram_width;
+ unsigned int registered_dimm;
+
+ /* SDRAM device parameters */
+ unsigned int n_row_addr;
+ unsigned int n_col_addr;
+ unsigned int edc_config; /* 0 = none, 1 = parity, 2 = ECC */
+ unsigned int n_banks_per_sdram_device;
+ unsigned int burst_lengths_bitmask; /* BL=4 bit 2, BL=8 = bit 3 */
+ unsigned int row_density;
+
+ /* used in computing base address of DIMMs */
+ unsigned long long base_address;
+ /* mirrored DIMMs */
+ unsigned int mirrored_dimm; /* only for ddr3 */
+
+ /* DIMM timing parameters */
+
+ unsigned int mtb_ps; /* medium timebase ps, only for ddr3 */
+ unsigned int tAA_ps; /* minimum CAS latency time, only for ddr3 */
+ unsigned int tFAW_ps; /* four active window delay, only for ddr3 */
+
+ /*
+ * SDRAM clock periods
+ * The range for these are 1000-10000 so a short should be sufficient
+ */
+ unsigned int tCKmin_X_ps;
+ unsigned int tCKmin_X_minus_1_ps;
+ unsigned int tCKmin_X_minus_2_ps;
+ unsigned int tCKmax_ps;
+
+ /* SPD-defined CAS latencies */
+ unsigned int caslat_X;
+ unsigned int caslat_X_minus_1;
+ unsigned int caslat_X_minus_2;
+
+ unsigned int caslat_lowest_derated; /* Derated CAS latency */
+
+ /* basic timing parameters */
+ unsigned int tRCD_ps;
+ unsigned int tRP_ps;
+ unsigned int tRAS_ps;
+
+ unsigned int tWR_ps; /* maximum = 63750 ps */
+ unsigned int tWTR_ps; /* maximum = 63750 ps */
+ unsigned int tRFC_ps; /* max = 255 ns + 256 ns + .75 ns
+ = 511750 ps */
+
+ unsigned int tRRD_ps; /* maximum = 63750 ps */
+ unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
+
+ unsigned int refresh_rate_ps;
+
+ /* DDR3 doesn't need these as below */
+ unsigned int tIS_ps; /* byte 32, spd->ca_setup */
+ unsigned int tIH_ps; /* byte 33, spd->ca_hold */
+ unsigned int tDS_ps; /* byte 34, spd->data_setup */
+ unsigned int tDH_ps; /* byte 35, spd->data_hold */
+ unsigned int tRTP_ps; /* byte 38, spd->trtp */
+ unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
+ unsigned int tQHS_ps; /* byte 45, spd->tqhs */
+} dimm_params_t;
+
+extern unsigned int ddr_compute_dimm_parameters(
+ const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number);
+
+#endif
--- /dev/null
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef FSL_DDR_MEMCTL_H
+#define FSL_DDR_MEMCTL_H
+
+/*
+ * Pick a basic DDR Technology.
+ */
+#include <ddr_spd.h>
+
+#define SDRAM_TYPE_DDR1 2
+#define SDRAM_TYPE_DDR2 3
+#define SDRAM_TYPE_LPDDR1 6
+#define SDRAM_TYPE_DDR3 7
+
+#define DDR_BL4 4 /* burst length 4 */
+#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */
+#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */
+#define DDR_BL8 8 /* burst length 8 */
+
+#if defined(CONFIG_FSL_DDR1)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
+typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1
+#endif
+#elif defined(CONFIG_FSL_DDR2)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3)
+typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2
+#endif
+#elif defined(CONFIG_FSL_DDR3)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */
+typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3
+#endif
+#endif /* #if defined(CONFIG_FSL_DDR1) */
+
+/* define bank(chip select) interleaving mode */
+#define FSL_DDR_CS0_CS1 0x40
+#define FSL_DDR_CS2_CS3 0x20
+#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
+#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
+
+/* define memory controller interleaving mode */
+#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0
+#define FSL_DDR_PAGE_INTERLEAVING 0x1
+#define FSL_DDR_BANK_INTERLEAVING 0x2
+#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3
+
+/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
+ */
+#define SDRAM_CFG_MEM_EN 0x80000000
+#define SDRAM_CFG_SREN 0x40000000
+#define SDRAM_CFG_ECC_EN 0x20000000
+#define SDRAM_CFG_RD_EN 0x10000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000
+#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
+#define SDRAM_CFG_DYN_PWR 0x00200000
+#define SDRAM_CFG_32_BE 0x00080000
+#define SDRAM_CFG_8_BE 0x00040000
+#define SDRAM_CFG_NCAP 0x00020000
+#define SDRAM_CFG_2T_EN 0x00008000
+#define SDRAM_CFG_BI 0x00000001
+
+#if defined(CONFIG_P4080)
+#define RD_TO_PRE_MASK 0xf
+#define RD_TO_PRE_SHIFT 13
+#define WR_DATA_DELAY_MASK 0xf
+#define WR_DATA_DELAY_SHIFT 9
+#else
+#define RD_TO_PRE_MASK 0x7
+#define RD_TO_PRE_SHIFT 13
+#define WR_DATA_DELAY_MASK 0x7
+#define WR_DATA_DELAY_SHIFT 10
+#endif
+
+/* Record of register values computed */
+typedef struct fsl_ddr_cfg_regs_s {
+ struct {
+ unsigned int bnds;
+ unsigned int config;
+ unsigned int config_2;
+ } cs[CONFIG_CHIP_SELECTS_PER_CTRL];
+ unsigned int timing_cfg_3;
+ unsigned int timing_cfg_0;
+ unsigned int timing_cfg_1;
+ unsigned int timing_cfg_2;
+ unsigned int ddr_sdram_cfg;
+ unsigned int ddr_sdram_cfg_2;
+ unsigned int ddr_sdram_mode;
+ unsigned int ddr_sdram_mode_2;
+ unsigned int ddr_sdram_md_cntl;
+ unsigned int ddr_sdram_interval;
+ unsigned int ddr_data_init;
+ unsigned int ddr_sdram_clk_cntl;
+ unsigned int ddr_init_addr;
+ unsigned int ddr_init_ext_addr;
+ unsigned int timing_cfg_4;
+ unsigned int timing_cfg_5;
+ unsigned int ddr_zq_cntl;
+ unsigned int ddr_wrlvl_cntl;
+ unsigned int ddr_sr_cntr;
+ unsigned int ddr_sdram_rcw_1;
+ unsigned int ddr_sdram_rcw_2;
+} fsl_ddr_cfg_regs_t;
+
+typedef struct memctl_options_partial_s {
+ unsigned int all_DIMMs_ECC_capable;
+ unsigned int all_DIMMs_tCKmax_ps;
+ unsigned int all_DIMMs_burst_lengths_bitmask;
+ unsigned int all_DIMMs_registered;
+ unsigned int all_DIMMs_unbuffered;
+ /* unsigned int lowest_common_SPD_caslat; */
+ unsigned int all_DIMMs_minimum_tRCD_ps;
+} memctl_options_partial_t;
+
+/*
+ * Generalized parameters for memory controller configuration,
+ * might be a little specific to the FSL memory controller
+ */
+typedef struct memctl_options_s {
+ /*
+ * Memory organization parameters
+ *
+ * if DIMM is present in the system
+ * where DIMMs are with respect to chip select
+ * where chip selects are with respect to memory boundaries
+ */
+ unsigned int registered_dimm_en; /* use registered DIMM support */
+
+ /* Options local to a Chip Select */
+ struct cs_local_opts_s {
+ unsigned int auto_precharge;
+ unsigned int odt_rd_cfg;
+ unsigned int odt_wr_cfg;
+ } cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];
+
+ /* Special configurations for chip select */
+ unsigned int memctl_interleaving;
+ unsigned int memctl_interleaving_mode;
+ unsigned int ba_intlv_ctl;
+
+ /* Operational mode parameters */
+ unsigned int ECC_mode; /* Use ECC? */
+ /* Initialize ECC using memory controller? */
+ unsigned int ECC_init_using_memctl;
+ unsigned int DQS_config; /* Use DQS? maybe only with DDR2? */
+ /* SREN - self-refresh during sleep */
+ unsigned int self_refresh_in_sleep;
+ unsigned int dynamic_power; /* DYN_PWR */
+ /* memory data width to use (16-bit, 32-bit, 64-bit) */
+ unsigned int data_bus_width;
+ unsigned int burst_length; /* BL4, OTF and BL8 */
+ /* On-The-Fly Burst Chop enable */
+ unsigned int OTF_burst_chop_en;
+ /* mirrior DIMMs for DDR3 */
+ unsigned int mirrored_dimm;
+
+ /* Global Timing Parameters */
+ unsigned int cas_latency_override;
+ unsigned int cas_latency_override_value;
+ unsigned int use_derated_caslat;
+ unsigned int additive_latency_override;
+ unsigned int additive_latency_override_value;
+
+ unsigned int clk_adjust; /* */
+ unsigned int cpo_override;
+ unsigned int write_data_delay; /* DQS adjust */
+
+ unsigned int wrlvl_override;
+ unsigned int wrlvl_sample; /* Write leveling */
+ unsigned int wrlvl_start;
+
+ unsigned int half_strength_driver_enable;
+ unsigned int twoT_en;
+ unsigned int threeT_en;
+ unsigned int bstopre;
+ unsigned int tCKE_clock_pulse_width_ps; /* tCKE */
+ unsigned int tFAW_window_four_activates_ps; /* tFAW -- FOUR_ACT */
+
+ /* Rtt impedance */
+ unsigned int rtt_override; /* rtt_override enable */
+ unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */
+ unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */
+
+ /* Automatic self refresh */
+ unsigned int auto_self_refresh_en;
+ unsigned int sr_it;
+ /* ZQ calibration */
+ unsigned int zq_en;
+ /* Write leveling */
+ unsigned int wrlvl_en;
+} memctl_options_t;
+
+extern phys_size_t fsl_ddr_sdram(void);
+#endif
--- /dev/null
+/*
+ * Freescale DMA Controller
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_FSL_DMA_H_
+#define _ASM_FSL_DMA_H_
+
+#include <asm/types.h>
+
+#ifdef CONFIG_MPC83xx
+typedef struct fsl_dma {
+ uint mr; /* DMA mode register */
+#define FSL_DMA_MR_CS 0x00000001 /* Channel start */
+#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */
+#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */
+#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */
+#define FSL_DMA_MR_EOTIE 0x00000080 /* End-of-transfer interrupt en */
+#define FSL_DMA_MR_PRC_MASK 0x00000c00 /* PCI read command */
+#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */
+#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */
+#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */
+#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */
+#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */
+#define FSL_DMA_MR_IRQS 0x00080000 /* Interrupt steer */
+#define FSL_DMA_MR_DMSEN 0x00100000 /* Direct mode snooping en */
+#define FSL_DMA_MR_BWC_MASK 0x00e00000 /* Bandwidth/pause ctl */
+#define FSL_DMA_MR_DRCNT 0x0f000000 /* DMA request count */
+ uint sr; /* DMA status register */
+#define FSL_DMA_SR_EOCDI 0x00000001 /* End-of-chain/direct interrupt */
+#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */
+#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */
+#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */
+ uint cdar; /* DMA current descriptor address register */
+ char res0[4];
+ uint sar; /* DMA source address register */
+ char res1[4];
+ uint dar; /* DMA destination address register */
+ char res2[4];
+ uint bcr; /* DMA byte count register */
+ uint ndar; /* DMA next descriptor address register */
+ uint gsr; /* DMA general status register (DMA3 ONLY!) */
+ char res3[84];
+} fsl_dma_t;
+#else
+typedef struct fsl_dma {
+ uint mr; /* DMA mode register */
+#define FSL_DMA_MR_CS 0x00000001 /* Channel start */
+#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */
+#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */
+#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */
+#define FSL_DMA_MR_CA 0x00000008 /* Channel abort */
+#define FSL_DMA_MR_CDSM 0x00000010
+#define FSL_DMA_MR_XFE 0x00000020 /* Extended features en */
+#define FSL_DMA_MR_EIE 0x00000040 /* Error interrupt en */
+#define FSL_DMA_MR_EOLSIE 0x00000080 /* End-of-lists interrupt en */
+#define FSL_DMA_MR_EOLNIE 0x00000100 /* End-of-links interrupt en */
+#define FSL_DMA_MR_EOSIE 0x00000200 /* End-of-seg interrupt en */
+#define FSL_DMA_MR_SRW 0x00000400 /* Single register write */
+#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */
+#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */
+#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */
+#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */
+#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */
+#define FSL_DMA_MR_EMP_EN 0x00200000 /* Ext master pause en */
+#define FSL_DMA_MR_BWC_MASK 0x0f000000 /* Bandwidth/pause ctl */
+#define FSL_DMA_MR_BWC_DIS 0x0f000000 /* Bandwidth/pause ctl disable */
+ uint sr; /* DMA status register */
+#define FSL_DMA_SR_EOLSI 0x00000001 /* End-of-list interrupt */
+#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */
+#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */
+#define FSL_DMA_SR_EOLNI 0x00000008 /* End-of-links interrupt */
+#define FSL_DMA_SR_PE 0x00000010 /* Programming error */
+#define FSL_DMA_SR_CH 0x00000020 /* Channel halted */
+#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */
+ char res0[4];
+ uint clndar; /* DMA current link descriptor address register */
+ uint satr; /* DMA source attributes register */
+#define FSL_DMA_SATR_ESAD_MASK 0x000001ff /* Extended source addr */
+#define FSL_DMA_SATR_SREAD_NO_SNOOP 0x00040000 /* Read, don't snoop */
+#define FSL_DMA_SATR_SREAD_SNOOP 0x00050000 /* Read, snoop */
+#define FSL_DMA_SATR_SREAD_UNLOCK 0x00070000 /* Read, unlock l2 */
+#define FSL_DMA_SATR_STRAN_MASK 0x00f00000 /* Source interface */
+#define FSL_DMA_SATR_SSME 0x01000000 /* Source stride en */
+#define FSL_DMA_SATR_SPCIORDER 0x02000000 /* PCI transaction order */
+#define FSL_DMA_SATR_STFLOWLVL_MASK 0x0c000000 /* RIO flow level */
+#define FSL_DMA_SATR_SBPATRMU 0x20000000 /* Bypass ATMU */
+ uint sar; /* DMA source address register */
+ uint datr; /* DMA destination attributes register */
+#define FSL_DMA_DATR_EDAD_MASK 0x000001ff /* Extended dest addr */
+#define FSL_DMA_DATR_DWRITE_NO_SNOOP 0x00040000 /* Write, don't snoop */
+#define FSL_DMA_DATR_DWRITE_SNOOP 0x00050000 /* Write, snoop */
+#define FSL_DMA_DATR_DWRITE_ALLOC 0x00060000 /* Write, alloc l2 */
+#define FSL_DMA_DATR_DWRITE_LOCK 0x00070000 /* Write, lock l2 */
+#define FSL_DMA_DATR_DTRAN_MASK 0x00f00000 /* Dest interface */
+#define FSL_DMA_DATR_DSME 0x01000000 /* Dest stride en */
+#define FSL_DMA_DATR_DPCIORDER 0x02000000 /* PCI transaction order */
+#define FSL_DMA_DATR_DTFLOWLVL_MASK 0x0c000000 /* RIO flow level */
+#define FSL_DMA_DATR_DBPATRMU 0x20000000 /* Bypass ATMU */
+ uint dar; /* DMA destination address register */
+ uint bcr; /* DMA byte count register */
+ char res1[4];
+ uint nlndar; /* DMA next link descriptor address register */
+ char res2[8];
+ uint clabdar; /* DMA current List - alternate base descriptor address Register */
+ char res3[4];
+ uint nlsdar; /* DMA next list descriptor address register */
+ uint ssr; /* DMA source stride register */
+ uint dsr; /* DMA destination stride register */
+ char res4[56];
+} fsl_dma_t;
+#endif /* !CONFIG_MPC83xx */
+
+#ifdef CONFIG_FSL_DMA
+void dma_init(void);
+int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t n);
+#if (defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
+void dma_meminit(uint val, uint size);
+#endif
+#endif
+
+#endif /* _ASM_DMA_H_ */
--- /dev/null
+/*
+ * Freescale I2C Controller
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
+ * Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
+ * and Jeff Brown.
+ * Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_FSL_I2C_H_
+#define _ASM_FSL_I2C_H_
+
+#include <asm/types.h>
+
+typedef struct fsl_i2c {
+
+ u8 adr; /* I2C slave address */
+ u8 res0[3];
+#define I2C_ADR 0xFE
+#define I2C_ADR_SHIFT 1
+#define I2C_ADR_RES ~(I2C_ADR)
+
+ u8 fdr; /* I2C frequency divider register */
+ u8 res1[3];
+#define IC2_FDR 0x3F
+#define IC2_FDR_SHIFT 0
+#define IC2_FDR_RES ~(IC2_FDR)
+
+ u8 cr; /* I2C control redister */
+ u8 res2[3];
+#define I2C_CR_MEN 0x80
+#define I2C_CR_MIEN 0x40
+#define I2C_CR_MSTA 0x20
+#define I2C_CR_MTX 0x10
+#define I2C_CR_TXAK 0x08
+#define I2C_CR_RSTA 0x04
+#define I2C_CR_BCST 0x01
+
+ u8 sr; /* I2C status register */
+ u8 res3[3];
+#define I2C_SR_MCF 0x80
+#define I2C_SR_MAAS 0x40
+#define I2C_SR_MBB 0x20
+#define I2C_SR_MAL 0x10
+#define I2C_SR_BCSTM 0x08
+#define I2C_SR_SRW 0x04
+#define I2C_SR_MIF 0x02
+#define I2C_SR_RXAK 0x01
+
+ u8 dr; /* I2C data register */
+ u8 res4[3];
+#define I2C_DR 0xFF
+#define I2C_DR_SHIFT 0
+#define I2C_DR_RES ~(I2C_DR)
+
+ u8 dfsrr; /* I2C digital filter sampling rate register */
+ u8 res5[3];
+#define I2C_DFSRR 0x3F
+#define I2C_DFSRR_SHIFT 0
+#define I2C_DFSRR_RES ~(I2C_DR)
+
+ /* Fill out the reserved block */
+ u8 res6[0xE8];
+} fsl_i2c_t;
+
+#endif /* _ASM_I2C_H_ */
--- /dev/null
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _FSL_LAW_H_
+#define _FSL_LAW_H_
+
+#include <asm/io.h>
+
+#define LAW_EN 0x80000000
+
+#define SET_LAW_ENTRY(idx, a, sz, trgt) \
+ { .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
+
+#define SET_LAW(a, sz, trgt) \
+ { .index = -1, .addr = a, .size = sz, .trgt_id = trgt }
+
+enum law_size {
+ LAW_SIZE_4K = 0xb,
+ LAW_SIZE_8K,
+ LAW_SIZE_16K,
+ LAW_SIZE_32K,
+ LAW_SIZE_64K,
+ LAW_SIZE_128K,
+ LAW_SIZE_256K,
+ LAW_SIZE_512K,
+ LAW_SIZE_1M,
+ LAW_SIZE_2M,
+ LAW_SIZE_4M,
+ LAW_SIZE_8M,
+ LAW_SIZE_16M,
+ LAW_SIZE_32M,
+ LAW_SIZE_64M,
+ LAW_SIZE_128M,
+ LAW_SIZE_256M,
+ LAW_SIZE_512M,
+ LAW_SIZE_1G,
+ LAW_SIZE_2G,
+ LAW_SIZE_4G,
+ LAW_SIZE_8G,
+ LAW_SIZE_16G,
+ LAW_SIZE_32G,
+};
+
+#define law_size_bits(sz) (__ilog2_u64(sz) - 1)
+
+#ifdef CONFIG_FSL_CORENET
+enum law_trgt_if {
+ LAW_TRGT_IF_PCIE_1 = 0x00,
+ LAW_TRGT_IF_PCIE_2 = 0x01,
+ LAW_TRGT_IF_PCIE_3 = 0x02,
+ LAW_TRGT_IF_RIO_1 = 0x08,
+ LAW_TRGT_IF_RIO_2 = 0x09,
+
+ LAW_TRGT_IF_DDR_1 = 0x10,
+ LAW_TRGT_IF_DDR_2 = 0x11, /* 2nd controller */
+ LAW_TRGT_IF_DDR_INTRLV = 0x14,
+
+ LAW_TRGT_IF_BMAN = 0x18,
+ LAW_TRGT_IF_DCSR = 0x1d,
+ LAW_TRGT_IF_LBC = 0x1f,
+ LAW_TRGT_IF_QMAN = 0x3c,
+};
+#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1
+#else
+enum law_trgt_if {
+ LAW_TRGT_IF_PCI = 0x00,
+ LAW_TRGT_IF_PCI_2 = 0x01,
+#ifndef CONFIG_MPC8641
+ LAW_TRGT_IF_PCIE_1 = 0x02,
+#endif
+#if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020)
+ LAW_TRGT_IF_PCIE_3 = 0x03,
+#endif
+ LAW_TRGT_IF_LBC = 0x04,
+ LAW_TRGT_IF_CCSR = 0x08,
+ LAW_TRGT_IF_DDR_INTRLV = 0x0b,
+ LAW_TRGT_IF_RIO = 0x0c,
+ LAW_TRGT_IF_RIO_2 = 0x0d,
+ LAW_TRGT_IF_DDR = 0x0f,
+ LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */
+};
+#define LAW_TRGT_IF_DDR_1 LAW_TRGT_IF_DDR
+#define LAW_TRGT_IF_PCI_1 LAW_TRGT_IF_PCI
+#define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI
+#define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2
+
+#ifdef CONFIG_MPC8641
+#define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI
+#endif
+
+#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020)
+#define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI
+#endif
+#endif /* CONFIG_FSL_CORENET */
+
+struct law_entry {
+ int index;
+ phys_addr_t addr;
+ enum law_size size;
+ enum law_trgt_if trgt_id;
+};
+
+extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id);
+extern struct law_entry find_law(phys_addr_t addr);
+extern void disable_law(u8 idx);
+extern void init_laws(void);
+extern void print_laws(void);
+
+/* define in board code */
+extern struct law_entry law_table[];
+extern int num_law_entries;
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_FSL_LBC_H
+#define __ASM_PPC_FSL_LBC_H
+
+#include <config.h>
+
+/* BR - Base Registers
+ */
+#define BR0 0x5000 /* Register offset to immr */
+#define BR1 0x5008
+#define BR2 0x5010
+#define BR3 0x5018
+#define BR4 0x5020
+#define BR5 0x5028
+#define BR6 0x5030
+#define BR7 0x5038
+
+#define BR_BA 0xFFFF8000
+#define BR_BA_SHIFT 15
+#define BR_XBA 0x00006000
+#define BR_XBA_SHIFT 13
+#define BR_PS 0x00001800
+#define BR_PS_SHIFT 11
+#define BR_PS_8 0x00000800 /* Port Size 8 bit */
+#define BR_PS_16 0x00001000 /* Port Size 16 bit */
+#define BR_PS_32 0x00001800 /* Port Size 32 bit */
+#define BR_DECC 0x00000600
+#define BR_DECC_SHIFT 9
+#define BR_DECC_OFF 0x00000000
+#define BR_DECC_CHK 0x00000200
+#define BR_DECC_CHK_GEN 0x00000400
+#define BR_WP 0x00000100
+#define BR_WP_SHIFT 8
+#define BR_MSEL 0x000000E0
+#define BR_MSEL_SHIFT 5
+#define BR_MS_GPCM 0x00000000 /* GPCM */
+#define BR_MS_FCM 0x00000020 /* FCM */
+#ifdef CONFIG_MPC83xx
+#define BR_MS_SDRAM 0x00000060 /* SDRAM */
+#elif defined(CONFIG_MPC85xx)
+#define BR_MS_SDRAM 0x00000000 /* SDRAM */
+#endif
+#define BR_MS_UPMA 0x00000080 /* UPMA */
+#define BR_MS_UPMB 0x000000A0 /* UPMB */
+#define BR_MS_UPMC 0x000000C0 /* UPMC */
+#if !defined(CONFIG_MPC834x)
+#define BR_ATOM 0x0000000C
+#define BR_ATOM_SHIFT 2
+#endif
+#define BR_V 0x00000001
+#define BR_V_SHIFT 0
+
+#define UPMA 0
+#define UPMB 1
+#define UPMC 2
+
+#if defined(CONFIG_MPC834x)
+#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
+#else
+#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
+#endif
+
+/* Convert an address into the right format for the BR registers */
+#if defined(CONFIG_PHYS_64BIT) && !defined(CONFIG_FSL_ELBC)
+#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \
+ ((x & 0x300000000ULL) >> 19)))
+#else
+#define BR_PHYS_ADDR(x) (x & 0xffff8000)
+#endif
+
+/* OR - Option Registers
+ */
+#define OR0 0x5004 /* Register offset to immr */
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_GPCM_AM 0xFFFF8000
+#define OR_GPCM_AM_SHIFT 15
+#define OR_GPCM_XAM 0x00006000
+#define OR_GPCM_XAM_SHIFT 13
+#define OR_GPCM_BCTLD 0x00001000
+#define OR_GPCM_BCTLD_SHIFT 12
+#define OR_GPCM_CSNT 0x00000800
+#define OR_GPCM_CSNT_SHIFT 11
+#define OR_GPCM_ACS 0x00000600
+#define OR_GPCM_ACS_SHIFT 9
+#define OR_GPCM_ACS_DIV2 0x00000600
+#define OR_GPCM_ACS_DIV4 0x00000400
+#define OR_GPCM_XACS 0x00000100
+#define OR_GPCM_XACS_SHIFT 8
+#define OR_GPCM_SCY 0x000000F0
+#define OR_GPCM_SCY_SHIFT 4
+#define OR_GPCM_SCY_1 0x00000010
+#define OR_GPCM_SCY_2 0x00000020
+#define OR_GPCM_SCY_3 0x00000030
+#define OR_GPCM_SCY_4 0x00000040
+#define OR_GPCM_SCY_5 0x00000050
+#define OR_GPCM_SCY_6 0x00000060
+#define OR_GPCM_SCY_7 0x00000070
+#define OR_GPCM_SCY_8 0x00000080
+#define OR_GPCM_SCY_9 0x00000090
+#define OR_GPCM_SCY_10 0x000000a0
+#define OR_GPCM_SCY_11 0x000000b0
+#define OR_GPCM_SCY_12 0x000000c0
+#define OR_GPCM_SCY_13 0x000000d0
+#define OR_GPCM_SCY_14 0x000000e0
+#define OR_GPCM_SCY_15 0x000000f0
+#define OR_GPCM_SETA 0x00000008
+#define OR_GPCM_SETA_SHIFT 3
+#define OR_GPCM_TRLX 0x00000004
+#define OR_GPCM_TRLX_SHIFT 2
+#define OR_GPCM_EHTR 0x00000002
+#define OR_GPCM_EHTR_SHIFT 1
+#define OR_GPCM_EAD 0x00000001
+#define OR_GPCM_EAD_SHIFT 0
+
+/* helpers to convert values into an OR address mask (GPCM mode) */
+#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
+#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
+
+#define OR_FCM_AM 0xFFFF8000
+#define OR_FCM_AM_SHIFT 15
+#define OR_FCM_XAM 0x00006000
+#define OR_FCM_XAM_SHIFT 13
+#define OR_FCM_BCTLD 0x00001000
+#define OR_FCM_BCTLD_SHIFT 12
+#define OR_FCM_PGS 0x00000400
+#define OR_FCM_PGS_SHIFT 10
+#define OR_FCM_CSCT 0x00000200
+#define OR_FCM_CSCT_SHIFT 9
+#define OR_FCM_CST 0x00000100
+#define OR_FCM_CST_SHIFT 8
+#define OR_FCM_CHT 0x00000080
+#define OR_FCM_CHT_SHIFT 7
+#define OR_FCM_SCY 0x00000070
+#define OR_FCM_SCY_SHIFT 4
+#define OR_FCM_SCY_1 0x00000010
+#define OR_FCM_SCY_2 0x00000020
+#define OR_FCM_SCY_3 0x00000030
+#define OR_FCM_SCY_4 0x00000040
+#define OR_FCM_SCY_5 0x00000050
+#define OR_FCM_SCY_6 0x00000060
+#define OR_FCM_SCY_7 0x00000070
+#define OR_FCM_RST 0x00000008
+#define OR_FCM_RST_SHIFT 3
+#define OR_FCM_TRLX 0x00000004
+#define OR_FCM_TRLX_SHIFT 2
+#define OR_FCM_EHTR 0x00000002
+#define OR_FCM_EHTR_SHIFT 1
+
+#define OR_UPM_AM 0xFFFF8000
+#define OR_UPM_AM_SHIFT 15
+#define OR_UPM_XAM 0x00006000
+#define OR_UPM_XAM_SHIFT 13
+#define OR_UPM_BCTLD 0x00001000
+#define OR_UPM_BCTLD_SHIFT 12
+#define OR_UPM_BI 0x00000100
+#define OR_UPM_BI_SHIFT 8
+#define OR_UPM_TRLX 0x00000004
+#define OR_UPM_TRLX_SHIFT 2
+#define OR_UPM_EHTR 0x00000002
+#define OR_UPM_EHTR_SHIFT 1
+#define OR_UPM_EAD 0x00000001
+#define OR_UPM_EAD_SHIFT 0
+
+#define OR_SDRAM_AM 0xFFFF8000
+#define OR_SDRAM_AM_SHIFT 15
+#define OR_SDRAM_XAM 0x00006000
+#define OR_SDRAM_XAM_SHIFT 13
+#define OR_SDRAM_COLS 0x00001C00
+#define OR_SDRAM_COLS_SHIFT 10
+#define OR_SDRAM_ROWS 0x000001C0
+#define OR_SDRAM_ROWS_SHIFT 6
+#define OR_SDRAM_PMSEL 0x00000020
+#define OR_SDRAM_PMSEL_SHIFT 5
+#define OR_SDRAM_EAD 0x00000001
+#define OR_SDRAM_EAD_SHIFT 0
+
+#define OR_AM_32KB 0xFFFF8000
+#define OR_AM_64KB 0xFFFF0000
+#define OR_AM_128KB 0xFFFE0000
+#define OR_AM_256KB 0xFFFC0000
+#define OR_AM_512KB 0xFFF80000
+#define OR_AM_1MB 0xFFF00000
+#define OR_AM_2MB 0xFFE00000
+#define OR_AM_4MB 0xFFC00000
+#define OR_AM_8MB 0xFF800000
+#define OR_AM_16MB 0xFF000000
+#define OR_AM_32MB 0xFE000000
+#define OR_AM_64MB 0xFC000000
+#define OR_AM_128MB 0xF8000000
+#define OR_AM_256MB 0xF0000000
+#define OR_AM_512MB 0xE0000000
+#define OR_AM_1GB 0xC0000000
+#define OR_AM_2GB 0x80000000
+#define OR_AM_4GB 0x00000000
+
+/* MxMR - UPM Machine A/B/C Mode Registers
+ */
+#define MxMR_MAD_MSK 0x0000003f /* Machine Address Mask */
+#define MxMR_TLFx_MSK 0x000003c0 /* Refresh Loop Field Mask */
+#define MxMR_WLFx_MSK 0x00003c00 /* Write Loop Field Mask */
+#define MxMR_WLFx_1X 0x00000400 /* executed 1 time */
+#define MxMR_WLFx_2X 0x00000800 /* executed 2 times */
+#define MxMR_WLFx_3X 0x00000c00 /* executed 3 times */
+#define MxMR_WLFx_4X 0x00001000 /* executed 4 times */
+#define MxMR_WLFx_5X 0x00001400 /* executed 5 times */
+#define MxMR_WLFx_6X 0x00001800 /* executed 6 times */
+#define MxMR_WLFx_7X 0x00001c00 /* executed 7 times */
+#define MxMR_WLFx_8X 0x00002000 /* executed 8 times */
+#define MxMR_WLFx_9X 0x00002400 /* executed 9 times */
+#define MxMR_WLFx_10X 0x00002800 /* executed 10 times */
+#define MxMR_WLFx_11X 0x00002c00 /* executed 11 times */
+#define MxMR_WLFx_12X 0x00003000 /* executed 12 times */
+#define MxMR_WLFx_13X 0x00003400 /* executed 13 times */
+#define MxMR_WLFx_14X 0x00003800 /* executed 14 times */
+#define MxMR_WLFx_15X 0x00003c00 /* executed 15 times */
+#define MxMR_WLFx_16X 0x00000000 /* executed 16 times */
+#define MxMR_RLFx_MSK 0x0003c000 /* Read Loop Field Mask */
+#define MxMR_GPL_x4DIS 0x00040000 /* GPL_A4 Ouput Line Disable */
+#define MxMR_G0CLx_MSK 0x00380000 /* General Line 0 Control Mask */
+#define MxMR_DSx_1_CYCL 0x00000000 /* 1 cycle Disable Period */
+#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
+#define MxMR_DSx_3_CYCL 0x00800000 /* 3 cycle Disable Period */
+#define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */
+#define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */
+#define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */
+#define MxMR_OP_NORM 0x00000000 /* Normal Operation */
+#define MxMR_OP_WARR 0x10000000 /* Write to Array */
+#define MxMR_OP_RARR 0x20000000 /* Read from Array */
+#define MxMR_OP_RUNP 0x30000000 /* Run Pattern */
+#define MxMR_OP_MSK 0x30000000 /* Command Opcode Mask */
+#define MxMR_RFEN 0x40000000 /* Refresh Enable */
+#define MxMR_BSEL 0x80000000 /* Bus Select */
+
+#define LBLAWAR_EN 0x80000000
+#define LBLAWAR_4KB 0x0000000B
+#define LBLAWAR_8KB 0x0000000C
+#define LBLAWAR_16KB 0x0000000D
+#define LBLAWAR_32KB 0x0000000E
+#define LBLAWAR_64KB 0x0000000F
+#define LBLAWAR_128KB 0x00000010
+#define LBLAWAR_256KB 0x00000011
+#define LBLAWAR_512KB 0x00000012
+#define LBLAWAR_1MB 0x00000013
+#define LBLAWAR_2MB 0x00000014
+#define LBLAWAR_4MB 0x00000015
+#define LBLAWAR_8MB 0x00000016
+#define LBLAWAR_16MB 0x00000017
+#define LBLAWAR_32MB 0x00000018
+#define LBLAWAR_64MB 0x00000019
+#define LBLAWAR_128MB 0x0000001A
+#define LBLAWAR_256MB 0x0000001B
+#define LBLAWAR_512MB 0x0000001C
+#define LBLAWAR_1GB 0x0000001D
+#define LBLAWAR_2GB 0x0000001E
+
+/* LBCR - Local Bus Configuration Register
+ */
+#define LBCR_LDIS 0x80000000
+#define LBCR_LDIS_SHIFT 31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT 22
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT 17
+#define LBCR_EPAR 0x00010000
+#define LBCR_EPAR_SHIFT 16
+#define LBCR_BMT 0x0000FF00
+#define LBCR_BMT_SHIFT 8
+
+/* LCRR - Clock Ratio Register
+ */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_BUFCMDC_1 0x10000000
+#define LCRR_BUFCMDC_2 0x20000000
+#define LCRR_BUFCMDC_3 0x30000000
+#define LCRR_BUFCMDC_4 0x00000000
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_ECL_4 0x00000000
+#define LCRR_ECL_5 0x01000000
+#define LCRR_ECL_6 0x02000000
+#define LCRR_ECL_7 0x03000000
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_EADC_1 0x00010000
+#define LCRR_EADC_2 0x00020000
+#define LCRR_EADC_3 0x00030000
+#define LCRR_EADC_4 0x00000000
+/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit
+ * should always be zero on older parts that have a four bit CLKDIV.
+ */
+#define LCRR_CLKDIV 0x0000001F
+#define LCRR_CLKDIV_SHIFT 0
+#if defined(CONFIG_MPC83xx) || defined (CONFIG_MPC8540) || \
+ defined(CONFIG_MPC8541) || defined (CONFIG_MPC8555) || \
+ defined(CONFIG_MPC8560)
+#define LCRR_CLKDIV_2 0x00000002
+#define LCRR_CLKDIV_4 0x00000004
+#define LCRR_CLKDIV_8 0x00000008
+#elif defined(CONFIG_FSL_CORENET)
+#define LCRR_CLKDIV_8 0x00000002
+#define LCRR_CLKDIV_16 0x00000004
+#define LCRR_CLKDIV_32 0x00000008
+#else
+#define LCRR_CLKDIV_4 0x00000002
+#define LCRR_CLKDIV_8 0x00000004
+#define LCRR_CLKDIV_16 0x00000008
+#endif
+
+/* LTEDR - Transfer Error Check Disable Register
+ */
+#define LTEDR_BMD 0x80000000 /* Bus monitor disable */
+#define LTEDR_PARD 0x20000000 /* Parity error checking disabled */
+#define LTEDR_WPD 0x04000000 /* Write protect error checking diable */
+#define LTEDR_WARA 0x00800000 /* Write-after-read-atomic error checking diable */
+#define LTEDR_RAWA 0x00400000 /* Read-after-write-atomic error checking disable */
+#define LTEDR_CSD 0x00080000 /* Chip select error checking disable */
+
+/* FMR - Flash Mode Register
+ */
+#define FMR_CWTO 0x0000F000
+#define FMR_CWTO_SHIFT 12
+#define FMR_BOOT 0x00000800
+#define FMR_ECCM 0x00000100
+#define FMR_AL 0x00000030
+#define FMR_AL_SHIFT 4
+#define FMR_OP 0x00000003
+#define FMR_OP_SHIFT 0
+
+/* FIR - Flash Instruction Register
+ */
+#define FIR_OP0 0xF0000000
+#define FIR_OP0_SHIFT 28
+#define FIR_OP1 0x0F000000
+#define FIR_OP1_SHIFT 24
+#define FIR_OP2 0x00F00000
+#define FIR_OP2_SHIFT 20
+#define FIR_OP3 0x000F0000
+#define FIR_OP3_SHIFT 16
+#define FIR_OP4 0x0000F000
+#define FIR_OP4_SHIFT 12
+#define FIR_OP5 0x00000F00
+#define FIR_OP5_SHIFT 8
+#define FIR_OP6 0x000000F0
+#define FIR_OP6_SHIFT 4
+#define FIR_OP7 0x0000000F
+#define FIR_OP7_SHIFT 0
+#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
+#define FIR_OP_CA 0x1 /* Issue current column address */
+#define FIR_OP_PA 0x2 /* Issue current block+page address */
+#define FIR_OP_UA 0x3 /* Issue user defined address */
+#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */
+
+/* FCR - Flash Command Register
+ */
+#define FCR_CMD0 0xFF000000
+#define FCR_CMD0_SHIFT 24
+#define FCR_CMD1 0x00FF0000
+#define FCR_CMD1_SHIFT 16
+#define FCR_CMD2 0x0000FF00
+#define FCR_CMD2_SHIFT 8
+#define FCR_CMD3 0x000000FF
+#define FCR_CMD3_SHIFT 0
+/* FBAR - Flash Block Address Register
+ */
+#define FBAR_BLK 0x00FFFFFF
+
+/* FPAR - Flash Page Address Register
+ */
+#define FPAR_SP_PI 0x00007C00
+#define FPAR_SP_PI_SHIFT 10
+#define FPAR_SP_MS 0x00000200
+#define FPAR_SP_CI 0x000001FF
+#define FPAR_SP_CI_SHIFT 0
+#define FPAR_LP_PI 0x0003F000
+#define FPAR_LP_PI_SHIFT 12
+#define FPAR_LP_MS 0x00000800
+#define FPAR_LP_CI 0x000007FF
+#define FPAR_LP_CI_SHIFT 0
+
+/* LSDMR - SDRAM Machine Mode Register
+ */
+#define LSDMR_RFEN (1 << (31 - 1))
+#define LSDMR_BSMA1516 (3 << (31 - 10))
+#define LSDMR_BSMA1617 (4 << (31 - 10))
+#define LSDMR_RFCR5 (3 << (31 - 16))
+#define LSDMR_RFCR16 (7 << (31 - 16))
+#define LSDMR_PRETOACT3 (3 << (31 - 19))
+#define LSDMR_PRETOACT7 (7 << (31 - 19))
+#define LSDMR_ACTTORW3 (3 << (31 - 22))
+#define LSDMR_ACTTORW7 (7 << (31 - 22))
+#define LSDMR_ACTTORW6 (6 << (31 - 22))
+#define LSDMR_BL8 (1 << (31 - 23))
+#define LSDMR_WRC2 (2 << (31 - 27))
+#define LSDMR_WRC4 (0 << (31 - 27))
+#define LSDMR_BUFCMD (1 << (31 - 29))
+#define LSDMR_CL3 (3 << (31 - 31))
+
+#define LSDMR_OP_NORMAL (0 << (31 - 4))
+#define LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define LSDMR_OP_MRW (3 << (31 - 4))
+#define LSDMR_OP_PRECH (4 << (31 - 4))
+#define LSDMR_OP_PCHALL (5 << (31 - 4))
+#define LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define LSDMR_OP_RWINV (7 << (31 - 4))
+
+/* LTESR - Transfer Error Status Register
+ */
+#define LTESR_BM 0x80000000
+#define LTESR_FCT 0x40000000
+#define LTESR_PAR 0x20000000
+#define LTESR_WP 0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS 0x00080000
+#define LTESR_CC 0x00000001
+
+#ifndef __ASSEMBLY__
+/*
+ * Local Bus Controller Registers.
+ */
+typedef struct lbus_bank {
+ u32 br; /* Base Register */
+ u32 or; /* Option Register */
+} lbus_bank_t;
+
+typedef struct fsl_lbus {
+ lbus_bank_t bank[8];
+ u8 res0[0x28];
+ u32 mar; /* UPM Address Register */
+ u8 res1[0x4];
+ u32 mamr; /* UPMA Mode Register */
+ u32 mbmr; /* UPMB Mode Register */
+ u32 mcmr; /* UPMC Mode Register */
+ u8 res2[0x8];
+ u32 mrtpr; /* Memory Refresh Timer Prescaler Register */
+ u32 mdr; /* UPM Data Register */
+ u8 res3[0x4];
+ u32 lsor; /* Special Operation Initiation Register */
+ u32 lsdmr; /* SDRAM Mode Register */
+ u8 res4[0x8];
+ u32 lurt; /* UPM Refresh Timer */
+ u32 lsrt; /* SDRAM Refresh Timer */
+ u8 res5[0x8];
+ u32 ltesr; /* Transfer Error Status Register */
+ u32 ltedr; /* Transfer Error Disable Register */
+ u32 lteir; /* Transfer Error Interrupt Register */
+ u32 lteatr; /* Transfer Error Attributes Register */
+ u32 ltear; /* Transfer Error Address Register */
+ u8 res6[0xC];
+ u32 lbcr; /* Configuration Register */
+ u32 lcrr; /* Clock Ratio Register */
+ u8 res7[0x8];
+ u32 fmr; /* Flash Mode Register */
+ u32 fir; /* Flash Instruction Register */
+ u32 fcr; /* Flash Command Register */
+ u32 fbar; /* Flash Block Addr Register */
+ u32 fpar; /* Flash Page Addr Register */
+ u32 fbcr; /* Flash Byte Count Register */
+ u8 res8[0xF08];
+} fsl_lbus_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_PPC_FSL_LBC_H */
--- /dev/null
+/*
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __FSL_PCI_H_
+#define __FSL_PCI_H_
+
+#include <asm/fsl_law.h>
+
+int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel);
+
+int fsl_setup_hose(struct pci_controller *hose, unsigned long addr);
+int fsl_is_pci_agent(struct pci_controller *hose);
+void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
+void fsl_pci_config_unlock(struct pci_controller *hose);
+void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose);
+
+/*
+ * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
+ */
+
+/*
+ * PCI Translation Registers
+ */
+typedef struct pci_outbound_window {
+ u32 potar; /* 0x00 - Address */
+ u32 potear; /* 0x04 - Address Extended */
+ u32 powbar; /* 0x08 - Window Base Address */
+ u32 res1;
+ u32 powar; /* 0x10 - Window Attributes */
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+ u32 res2[3];
+} pot_t;
+
+typedef struct pci_inbound_window {
+ u32 pitar; /* 0x00 - Address */
+ u32 res1;
+ u32 piwbar; /* 0x08 - Window Base Address */
+ u32 piwbear; /* 0x0c - Window Base Address Extended */
+ u32 piwar; /* 0x10 - Window Attributes */
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+ u32 res2[3];
+} pit_t;
+
+/* PCI/PCI Express Registers */
+typedef struct ccsr_pci {
+ u32 cfg_addr; /* 0x000 - PCI Configuration Address Register */
+ u32 cfg_data; /* 0x004 - PCI Configuration Data Register */
+ u32 int_ack; /* 0x008 - PCI Interrupt Acknowledge Register */
+ u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */
+ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */
+ u32 config; /* 0x014 - PCIE CONFIG Register */
+ char res2[8];
+ u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */
+ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
+ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
+ u32 pm_command; /* 0x02c - PCIE PM Command register */
+ char res4[3016]; /* (- #xbf8 #x30)3016 */
+ u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
+ u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
+
+ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
+ u32 res5[64];
+ pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
+#define PIT3 0
+#define PIT2 1
+#define PIT1 2
+
+#if 0
+ u32 potar0; /* 0xc00 - PCI Outbound Transaction Address Register 0 */
+ u32 potear0; /* 0xc04 - PCI Outbound Translation Extended Address Register 0 */
+ char res5[8];
+ u32 powar0; /* 0xc10 - PCI Outbound Window Attributes Register 0 */
+ char res6[12];
+ u32 potar1; /* 0xc20 - PCI Outbound Transaction Address Register 1 */
+ u32 potear1; /* 0xc24 - PCI Outbound Translation Extended Address Register 1 */
+ u32 powbar1; /* 0xc28 - PCI Outbound Window Base Address Register 1 */
+ char res7[4];
+ u32 powar1; /* 0xc30 - PCI Outbound Window Attributes Register 1 */
+ char res8[12];
+ u32 potar2; /* 0xc40 - PCI Outbound Transaction Address Register 2 */
+ u32 potear2; /* 0xc44 - PCI Outbound Translation Extended Address Register 2 */
+ u32 powbar2; /* 0xc48 - PCI Outbound Window Base Address Register 2 */
+ char res9[4];
+ u32 powar2; /* 0xc50 - PCI Outbound Window Attributes Register 2 */
+ char res10[12];
+ u32 potar3; /* 0xc60 - PCI Outbound Transaction Address Register 3 */
+ u32 potear3; /* 0xc64 - PCI Outbound Translation Extended Address Register 3 */
+ u32 powbar3; /* 0xc68 - PCI Outbound Window Base Address Register 3 */
+ char res11[4];
+ u32 powar3; /* 0xc70 - PCI Outbound Window Attributes Register 3 */
+ char res12[12];
+ u32 potar4; /* 0xc80 - PCI Outbound Transaction Address Register 4 */
+ u32 potear4; /* 0xc84 - PCI Outbound Translation Extended Address Register 4 */
+ u32 powbar4; /* 0xc88 - PCI Outbound Window Base Address Register 4 */
+ char res13[4];
+ u32 powar4; /* 0xc90 - PCI Outbound Window Attributes Register 4 */
+ char res14[268];
+ u32 pitar3; /* 0xda0 - PCI Inbound Translation Address Register 3 */
+ char res15[4];
+ u32 piwbar3; /* 0xda8 - PCI Inbound Window Base Address Register 3 */
+ u32 piwbear3; /* 0xdac - PCI Inbound Window Base Extended Address Register 3 */
+ u32 piwar3; /* 0xdb0 - PCI Inbound Window Attributes Register 3 */
+ char res16[12];
+ u32 pitar2; /* 0xdc0 - PCI Inbound Translation Address Register 2 */
+ char res17[4];
+ u32 piwbar2; /* 0xdc8 - PCI Inbound Window Base Address Register 2 */
+ u32 piwbear2; /* 0xdcc - PCI Inbound Window Base Extended Address Register 2 */
+ u32 piwar2; /* 0xdd0 - PCI Inbound Window Attributes Register 2 */
+ char res18[12];
+ u32 pitar1; /* 0xde0 - PCI Inbound Translation Address Register 1 */
+ char res19[4];
+ u32 piwbar1; /* 0xde8 - PCI Inbound Window Base Address Register 1 */
+ char res20[4];
+ u32 piwar1; /* 0xdf0 - PCI Inbound Window Attributes Register 1 */
+ char res21[12];
+#endif
+ u32 pedr; /* 0xe00 - PCI Error Detect Register */
+ u32 pecdr; /* 0xe04 - PCI Error Capture Disable Register */
+ u32 peer; /* 0xe08 - PCI Error Interrupt Enable Register */
+ u32 peattrcr; /* 0xe0c - PCI Error Attributes Capture Register */
+ u32 peaddrcr; /* 0xe10 - PCI Error Address Capture Register */
+/* u32 perr_disr * 0xe10 - PCIE Erorr Disable Register */
+ u32 peextaddrcr; /* 0xe14 - PCI Error Extended Address Capture Register */
+ u32 pedlcr; /* 0xe18 - PCI Error Data Low Capture Register */
+ u32 pedhcr; /* 0xe1c - PCI Error Error Data High Capture Register */
+ u32 gas_timr; /* 0xe20 - PCI Gasket Timer Register */
+/* u32 perr_cap_stat; * 0xe20 - PCIE Error Capture Status Register */
+ char res22[4];
+ u32 perr_cap0; /* 0xe28 - PCIE Error Capture Register 0 */
+ u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
+ u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
+ u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
+ char res23[200];
+ u32 pdb_stat; /* 0xf00 - PCIE Debug Status */
+ char res24[252];
+} ccsr_fsl_pci_t;
+
+struct fsl_pci_info {
+ unsigned long regs;
+ pci_addr_t mem_bus;
+ phys_size_t mem_phys;
+ pci_size_t mem_size;
+ pci_addr_t io_bus;
+ phys_size_t io_phys;
+ pci_size_t io_size;
+ int pci_num;
+};
+
+int fsl_pci_init_port(struct fsl_pci_info *pci_info,
+ struct pci_controller *hose, int busno);
+
+#define SET_STD_PCI_INFO(x, num) \
+{ \
+ x.regs = CONFIG_SYS_PCI##num##_ADDR; \
+ x.mem_bus = CONFIG_SYS_PCI##num##_MEM_BUS; \
+ x.mem_phys = CONFIG_SYS_PCI##num##_MEM_PHYS; \
+ x.mem_size = CONFIG_SYS_PCI##num##_MEM_SIZE; \
+ x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \
+ x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \
+ x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \
+ x.pci_num = num; \
+}
+
+#define SET_STD_PCIE_INFO(x, num) \
+{ \
+ x.regs = CONFIG_SYS_PCIE##num##_ADDR; \
+ x.mem_bus = CONFIG_SYS_PCIE##num##_MEM_BUS; \
+ x.mem_phys = CONFIG_SYS_PCIE##num##_MEM_PHYS; \
+ x.mem_size = CONFIG_SYS_PCIE##num##_MEM_SIZE; \
+ x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \
+ x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \
+ x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \
+ x.pci_num = num; \
+}
+
+#endif
--- /dev/null
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+#define FSL_SERDES_CLK_100 (0 << 28)
+#define FSL_SERDES_CLK_125 (1 << 28)
+#define FSL_SERDES_CLK_150 (3 << 28)
+#define FSL_SERDES_PROTO_SATA 0
+#define FSL_SERDES_PROTO_PEX 1
+#define FSL_SERDES_PROTO_PEX_X2 2
+#define FSL_SERDES_PROTO_SGMII 3
+#define FSL_SERDES_VDD_1V 1
+
+#ifdef CONFIG_FSL_SERDES
+extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd);
+#else
+static void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd) {}
+#endif /* CONFIG_FSL_SERDES */
+
+#endif /* __FSL_SERDES_H */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+
+#include "config.h"
+#include "asm/types.h"
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+#if defined(CONFIG_8xx)
+ unsigned long brg_clk;
+#endif
+#if defined(CONFIG_CPM2)
+ /* There are many clocks on the MPC8260 - see page 9-5 */
+ unsigned long vco_out;
+ unsigned long cpm_clk;
+ unsigned long scc_clk;
+ unsigned long brg_clk;
+#ifdef CONFIG_PCI
+ unsigned long pci_clk;
+#endif
+#endif
+ unsigned long mem_clk;
+#if defined(CONFIG_MPC83xx)
+ /* There are other clocks in the MPC83XX */
+ u32 csb_clk;
+#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+ u32 tsec1_clk;
+ u32 tsec2_clk;
+ u32 usbdr_clk;
+#endif
+#if defined (CONFIG_MPC834x)
+ u32 usbmph_clk;
+#endif /* CONFIG_MPC834x */
+#if defined(CONFIG_MPC8315)
+ u32 tdm_clk;
+#endif
+ u32 core_clk;
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 pci_clk;
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
+#if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+#endif /* CONFIG_MPC8360 */
+#endif
+#if defined(CONFIG_FSL_ESDHC)
+ u32 sdhc_clk;
+#endif
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ u32 lbc_clk;
+ void *cpu;
+#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ u32 i2c1_clk;
+ u32 i2c2_clk;
+#endif
+#if defined(CONFIG_QE)
+ u32 qe_clk;
+ u32 brg_clk;
+ uint mp_alloc_base;
+ uint mp_alloc_top;
+#endif /* CONFIG_QE */
+#if defined(CONFIG_FSL_LAW)
+ u32 used_laws;
+#endif
+#if defined(CONFIG_E500)
+ u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
+#endif
+#if defined(CONFIG_MPC5xxx)
+ unsigned long ipb_clk;
+ unsigned long pci_clk;
+#endif
+#if defined(CONFIG_MPC512X)
+ u32 ips_clk;
+ u32 csb_clk;
+ u32 pci_clk;
+#endif /* CONFIG_MPC512X */
+#if defined(CONFIG_MPC8220)
+ unsigned long bExtUart;
+ unsigned long inp_clk;
+ unsigned long pci_clk;
+ unsigned long vco_clk;
+ unsigned long pev_clk;
+ unsigned long flb_clk;
+#endif
+ phys_size_t ram_size; /* RAM size */
+ unsigned long reset_status; /* reset status register at boot */
+#if defined(CONFIG_MPC83xx)
+ unsigned long arbiter_event_attributes;
+ unsigned long arbiter_event_address;
+#endif
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ unsigned long have_console; /* serial_init() was called */
+#if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
+ unsigned int dp_alloc_base;
+ unsigned int dp_alloc_top;
+#endif
+#if defined(CONFIG_4xx)
+ u32 uart_clk;
+#endif /* CONFIG_4xx */
+#if defined(CONFIG_SYS_GT_6426x)
+ unsigned int mirror_hack[16];
+#endif
+#if defined(CONFIG_A3000) || \
+ defined(CONFIG_HIDDEN_DRAGON) || \
+ defined(CONFIG_MUSENKI) || \
+ defined(CONFIG_SANDPOINT)
+ void * console_addr;
+#endif
+ unsigned long relocaddr; /* Start address of U-Boot in RAM */
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
+ unsigned long fb_base; /* Base address of framebuffer memory */
+#endif
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+ unsigned long post_log_word; /* Record POST activities */
+ unsigned long post_init_f_time; /* When post_init_f started */
+#endif
+#ifdef CONFIG_BOARD_TYPES
+ unsigned long board_type;
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ unsigned long do_mdm_init;
+ unsigned long be_quiet;
+#endif
+#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
+ unsigned long kbd_status;
+#endif
+#if defined(CONFIG_WD_MAX_RATE)
+ unsigned long long wdt_last; /* trace watch-dog triggering rate */
+#endif
+ void **jt; /* jump table */
+} gd_t;
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
+#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
+#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
+#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
+
+#if 1
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
+#else /* We could use plain global data, but the resulting code is bigger */
+#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
+#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
+ gd_t *gd
+#endif
+
+#endif /* __ASM_GBL_DATA_H */
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_PPC_GPIO_H
+#define __ASM_PPC_GPIO_H
+
+#include <asm/types.h>
+
+/* 4xx PPC's have 2 GPIO controllers */
+#if defined(CONFIG_405EZ) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define GPIO_GROUP_MAX 2
+#else
+#define GPIO_GROUP_MAX 1
+#endif
+
+/* GPIO controller */
+struct ppc4xx_gpio {
+ u32 or; /* Output Control */
+ u32 tcr; /* Tri-State Control */
+ u32 osl; /* Output Select 16..31 */
+ u32 osh; /* Output Select 0..15 */
+ u32 tsl; /* Tri-State Select 16..31 */
+ u32 tsh; /* Tri-State Select 0..15 */
+ u32 odr; /* Open Drain */
+ u32 ir; /* Input */
+ u32 rr1; /* Receive Register 1 */
+ u32 rr2; /* Receive Register 2 */
+ u32 rr3; /* Receive Register 3 */
+ u32 reserved;
+ u32 is1l; /* Input Select 1 16..31 */
+ u32 is1h; /* Input Select 1 0..15 */
+ u32 is2l; /* Input Select 2 16..31 */
+ u32 is2h; /* Input Select 2 0..15 */
+ u32 is3l; /* Input Select 3 16..31 */
+ u32 is3h; /* Input Select 3 0..15 */
+};
+
+/* Offsets */
+#define GPIOx_OR 0x00 /* GPIO Output Register */
+#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
+#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
+#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
+#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
+#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
+#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
+#define GPIOx_IR 0x1C /* GPIO Input Register */
+#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
+#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
+#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
+#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
+#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
+#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
+#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
+#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
+#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
+
+#define GPIO_OR(x) (x+GPIOx_OR) /* GPIO Output Register */
+#define GPIO_TCR(x) (x+GPIOx_TCR) /* GPIO Three-State Control Register */
+#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Select Register High or Low */
+#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
+#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
+#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
+#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
+
+#define GPIO0 0
+#define GPIO1 1
+
+#define GPIO_MAX 32
+#define GPIO_ALT1_SEL 0x40000000
+#define GPIO_ALT2_SEL 0x80000000
+#define GPIO_ALT3_SEL 0xc0000000
+#define GPIO_IN_SEL 0x40000000
+#define GPIO_MASK 0xc0000000
+
+#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
+
+#ifndef __ASSEMBLY__
+typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
+typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
+typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
+
+typedef struct {
+ unsigned long add; /* gpio core base address */
+ gpio_driver_t in_out; /* Driver Setting */
+ gpio_select_t alt_nb; /* Selected Alternate */
+ gpio_out_t out_val;/* Default Output Value */
+} gpio_param_s;
+#endif
+
+void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
+void gpio_write_bit(int pin, int val);
+int gpio_read_out_bit(int pin);
+int gpio_read_in_bit(int pin);
+void gpio_set_chip_configuration(void);
+
+#endif /* __ASM_PPC_GPIO_H */
--- /dev/null
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * MPC512x Internal Memory Map
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on the MPC83xx header.
+ */
+
+#ifndef __IMMAP_512x__
+#define __IMMAP_512x__
+
+#include <asm/types.h>
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
+
+/*
+ * System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
+
+#define SPR_5121E 0x80180000
+
+/*
+ * IMMRBAR - Internal Memory Register Base Address
+ */
+#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
+#define IMMRBAR 0x0000 /* Register offset to immr */
+#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
+#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
+
+
+#ifndef __ASSEMBLY__
+typedef struct law512x {
+ u32 bar; /* Base Addr Register */
+ u32 ar; /* Attributes Register */
+} law512x_t;
+
+/*
+ * System configuration registers
+ */
+typedef struct sysconf512x {
+ u32 immrbar; /* Internal memory map base address register */
+ u8 res0[0x1c];
+ u32 lpbaw; /* LP Boot Access Window */
+ u32 lpcs0aw; /* LP CS0 Access Window */
+ u32 lpcs1aw; /* LP CS1 Access Window */
+ u32 lpcs2aw; /* LP CS2 Access Window */
+ u32 lpcs3aw; /* LP CS3 Access Window */
+ u32 lpcs4aw; /* LP CS4 Access Window */
+ u32 lpcs5aw; /* LP CS5 Access Window */
+ u32 lpcs6aw; /* LP CS6 Access Window */
+ u32 lpcs7aw; /* LP CS7 Access Window */
+ u8 res1[0x1c];
+ law512x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */
+ u8 res2[0x28];
+ law512x_t ddrlaw; /* DDR Local Access Window */
+ u8 res3[0x18];
+ u32 mbxbar; /* MBX Base Address */
+ u32 srambar; /* SRAM Base Address */
+ u32 nfcbar; /* NFC Base Address */
+ u8 res4[0x34];
+ u32 spridr; /* System Part and Revision ID Register */
+ u32 spcr; /* System Priority Configuration Register */
+ u8 res5[0xf8];
+} sysconf512x_t;
+
+#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */
+
+/*
+ * Watch Dog Timer (WDT) Registers
+ */
+typedef struct wdt512x {
+ u8 res0[4];
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
+ u8 res1[2];
+ u16 swsrr; /* System watchdog service register */
+ u8 res2[0xF0];
+} wdt512x_t;
+
+/*
+ * RTC Module Registers
+ */
+typedef struct rtclk512x {
+ u8 fixme[0x100];
+} rtclk512x_t;
+
+/*
+ * General Purpose Timer
+ */
+typedef struct gpt512x {
+ u8 fixme[0x100];
+} gpt512x_t;
+
+/*
+ * Integrated Programmable Interrupt Controller
+ */
+typedef struct ipic512x {
+ u8 fixme[0x100];
+} ipic512x_t;
+
+/*
+ * System Arbiter Registers
+ */
+typedef struct arbiter512x {
+ u32 acr; /* Arbiter Configuration Register */
+ u32 atr; /* Arbiter Timers Register */
+ u32 ater; /* Arbiter Transfer Error Register */
+ u32 aer; /* Arbiter Event Register */
+ u32 aidr; /* Arbiter Interrupt Definition Register */
+ u32 amr; /* Arbiter Mask Register */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register */
+ u8 res1[0xDC];
+} arbiter512x_t;
+
+/*
+ * Reset Module
+ */
+typedef struct reset512x {
+ u32 rcwl; /* Reset Configuration Word Low Register */
+ u32 rcwh; /* Reset Configuration Word High Register */
+ u8 res0[8];
+ u32 rsr; /* Reset Status Register */
+ u32 rmr; /* Reset Mode Register */
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+ u32 rcer; /* Reset Control Enable Register */
+ u8 res1[0xDC];
+} reset512x_t;
+
+/* RSR - Reset Status Register */
+#define RSR_SWSR 0x00002000 /* software soft reset */
+#define RSR_SWHR 0x00001000 /* software hard reset */
+#define RSR_JHRS 0x00000200 /* jtag hreset */
+#define RSR_JSRS 0x00000100 /* jtag sreset status */
+#define RSR_CSHR 0x00000010 /* checkstop reset status */
+#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+#define RSR_SRS 0x00000002 /* soft reset status */
+#define RSR_HRS 0x00000001 /* hard reset status */
+#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\
+ RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
+ RSR_BMRS | RSR_SRS | RSR_HRS)
+
+/* RMR - Reset Mode Register */
+#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+#define RMR_CSRE_SHIFT 0
+#define RMR_RES (~(RMR_CSRE))
+
+/* RCR - Reset Control Register */
+#define RCR_SWHR 0x00000002 /* software hard reset */
+#define RCR_SWSR 0x00000001 /* software soft reset */
+#define RCR_RES (~(RCR_SWHR | RCR_SWSR))
+
+/* RCER - Reset Control Enable Register */
+#define RCER_CRE 0x00000001 /* software hard reset */
+#define RCER_RES (~(RCER_CRE))
+
+/*
+ * Clock Module
+ */
+typedef struct clk512x {
+ u32 spmr; /* System PLL Mode Register */
+ u32 sccr[2]; /* System Clock Control Registers */
+ u32 scfr[2]; /* System Clock Frequency Registers */
+ u8 res0[4];
+ u32 bcr; /* Bread Crumb Register */
+ u32 pscccr[12]; /* PSC0-11 Clock Control Registers */
+ u32 spccr; /* SPDIF Clock Control Register */
+ u32 cccr; /* CFM Clock Control Register */
+ u32 dccr; /* DIU Clock Control Register */
+ u32 msccr[4]; /* MSCAN1-4 Clock Control Registers */
+ u8 res1[0x98];
+} clk512x_t;
+
+/* SPMR - System PLL Mode Register */
+#define SPMR_SPMF 0x0F000000
+#define SPMR_SPMF_SHIFT 24
+#define SPMR_CPMF 0x000F0000
+#define SPMR_CPMF_SHIFT 16
+
+/* System Clock Control Register 1 commands */
+#define CLOCK_SCCR1_CFG_EN 0x80000000
+#define CLOCK_SCCR1_LPC_EN 0x40000000
+#define CLOCK_SCCR1_NFC_EN 0x20000000
+#define CLOCK_SCCR1_PATA_EN 0x10000000
+#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn))
+#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000
+#define CLOCK_SCCR1_SATA_EN 0x00004000
+#define CLOCK_SCCR1_FEC_EN 0x00002000
+#define CLOCK_SCCR1_TPR_EN 0x00001000
+#define CLOCK_SCCR1_PCI_EN 0x00000800
+#define CLOCK_SCCR1_DDR_EN 0x00000400
+
+/* System Clock Control Register 2 commands */
+#define CLOCK_SCCR2_DIU_EN 0x80000000
+#define CLOCK_SCCR2_AXE_EN 0x40000000
+#define CLOCK_SCCR2_MEM_EN 0x20000000
+#define CLOCK_SCCR2_USB1_EN 0x10000000
+#define CLOCK_SCCR2_USB2_EN 0x08000000
+#define CLOCK_SCCR2_I2C_EN 0x04000000
+#define CLOCK_SCCR2_BDLC_EN 0x02000000
+#define CLOCK_SCCR2_SDHC_EN 0x01000000
+#define CLOCK_SCCR2_SPDIF_EN 0x00800000
+#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000
+#define CLOCK_SCCR2_MBX_EN 0x00200000
+#define CLOCK_SCCR2_MBX_3D_EN 0x00100000
+#define CLOCK_SCCR2_IIM_EN 0x00080000
+
+/* SCFR1 System Clock Frequency Register 1 */
+#define SCFR1_IPS_DIV 0x3
+#define SCFR1_IPS_DIV_MASK 0x03800000
+#define SCFR1_IPS_DIV_SHIFT 23
+
+#define SCFR1_PCI_DIV 0x6
+#define SCFR1_PCI_DIV_MASK 0x00700000
+#define SCFR1_PCI_DIV_SHIFT 20
+
+#define SCFR1_LPC_DIV_MASK 0x00003800
+#define SCFR1_LPC_DIV_SHIFT 11
+
+/* SCFR2 System Clock Frequency Register 2 */
+#define SCFR2_SYS_DIV 0xFC000000
+#define SCFR2_SYS_DIV_SHIFT 26
+
+/* SPCR - System Priority Configuration Register */
+#define SPCR_TBEN 0x00400000 /* E300 core time base unit enable */
+
+/*
+ * Power Management Control Module
+ */
+typedef struct pmc512x {
+ u8 fixme[0x100];
+} pmc512x_t;
+
+/*
+ * General purpose I/O module
+ */
+typedef struct gpio512x {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr1;
+ u32 gpicr2;
+ u8 res0[0xE4];
+} gpio512x_t;
+
+/*
+ * DDR Memory Controller Memory Map
+ */
+typedef struct ddr512x {
+ u32 ddr_sys_config; /* System Configuration Register */
+ u32 ddr_time_config0; /* Timing Configuration Register */
+ u32 ddr_time_config1; /* Timing Configuration Register */
+ u32 ddr_time_config2; /* Timing Configuration Register */
+ u32 ddr_command; /* Command Register */
+ u32 ddr_compact_command; /* Compact Command Register */
+ u32 self_refresh_cmd_0; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_1; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_2; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_3; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_4; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_5; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_6; /* Enter/Exit Self Refresh Registers */
+ u32 self_refresh_cmd_7; /* Enter/Exit Self Refresh Registers */
+ u32 DQS_config_offset_count; /* DQS Config Offset Count */
+ u32 DQS_config_offset_time; /* DQS Config Offset Time */
+ u32 DQS_delay_status; /* DQS Delay Status */
+ u32 res0[0xF];
+ u32 prioman_config1; /* Priority Manager Configuration */
+ u32 prioman_config2; /* Priority Manager Configuration */
+ u32 hiprio_config; /* High Priority Configuration */
+ u32 lut_table0_main_upper; /* LUT0 Main Upper */
+ u32 lut_table1_main_upper; /* LUT1 Main Upper */
+ u32 lut_table2_main_upper; /* LUT2 Main Upper */
+ u32 lut_table3_main_upper; /* LUT3 Main Upper */
+ u32 lut_table4_main_upper; /* LUT4 Main Upper */
+ u32 lut_table0_main_lower; /* LUT0 Main Lower */
+ u32 lut_table1_main_lower; /* LUT1 Main Lower */
+ u32 lut_table2_main_lower; /* LUT2 Main Lower */
+ u32 lut_table3_main_lower; /* LUT3 Main Lower */
+ u32 lut_table4_main_lower; /* LUT4 Main Lower */
+ u32 lut_table0_alternate_upper; /* LUT0 Alternate Upper */
+ u32 lut_table1_alternate_upper; /* LUT1 Alternate Upper */
+ u32 lut_table2_alternate_upper; /* LUT2 Alternate Upper */
+ u32 lut_table3_alternate_upper; /* LUT3 Alternate Upper */
+ u32 lut_table4_alternate_upper; /* LUT4 Alternate Upper */
+ u32 lut_table0_alternate_lower; /* LUT0 Alternate Lower */
+ u32 lut_table1_alternate_lower; /* LUT1 Alternate Lower */
+ u32 lut_table2_alternate_lower; /* LUT2 Alternate Lower */
+ u32 lut_table3_alternate_lower; /* LUT3 Alternate Lower */
+ u32 lut_table4_alternate_lower; /* LUT4 Alternate Lower */
+ u32 performance_monitor_config;
+ u32 event_time_counter;
+ u32 event_time_preset;
+ u32 performance_monitor1_address_low;
+ u32 performance_monitor2_address_low;
+ u32 performance_monitor1_address_hi;
+ u32 performance_monitor2_address_hi;
+ u32 res1[2];
+ u32 performance_monitor1_read_counter;
+ u32 performance_monitor2_read_counter;
+ u32 performance_monitor1_write_counter;
+ u32 performance_monitor2_write_counter;
+ u32 granted_ack_counter0;
+ u32 granted_ack_counter1;
+ u32 granted_ack_counter2;
+ u32 granted_ack_counter3;
+ u32 granted_ack_counter4;
+ u32 cumulative_wait_counter0;
+ u32 cumulative_wait_counter1;
+ u32 cumulative_wait_counter2;
+ u32 cumulative_wait_counter3;
+ u32 cumulative_wait_counter4;
+ u32 summed_priority_counter0;
+ u32 summed_priority_counter1;
+ u32 summed_priority_counter2;
+ u32 summed_priority_counter3;
+ u32 summed_priority_counter4;
+ u32 res2[0x3AD];
+} ddr512x_t;
+
+/* MDDRC SYS CFG and Timing CFG0 Registers */
+#define MDDRC_SYS_CFG_EN 0xF0000000
+#define MDDRC_SYS_CFG_CMD_MASK 0x10000000
+#define MDDRC_REFRESH_ZERO_MASK 0x0000FFFF
+
+/*
+ * DDR Memory Controller Configuration settings
+ */
+typedef struct ddr512x_config {
+ u32 ddr_sys_config; /* System Configuration Register */
+ u32 ddr_time_config0; /* Timing Configuration Register */
+ u32 ddr_time_config1; /* Timing Configuration Register */
+ u32 ddr_time_config2; /* Timing Configuration Register */
+} ddr512x_config_t;
+
+/*
+ * DMA/Messaging Unit
+ */
+typedef struct dma512x {
+ u8 fixme[0x1800];
+} dma512x_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct pciconf512x {
+ u32 config_address;
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
+} pciconf512x_t;
+
+/*
+ * PCI Outbound Translation Register
+ */
+typedef struct pci_outbound_window {
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot512x_t;
+
+/* POTAR - PCI Outbound Translation Address Register */
+#define POTAR_TA_MASK 0x000fffff
+
+/* POBAR - PCI Outbound Base Address Register */
+#define POBAR_BA_MASK 0x000fffff
+
+/* POCMR - PCI Outbound Comparision Mask Register */
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */
+#define POCMR_PRE 0x20000000 /* prefetch enable */
+#define POCMR_SBS 0x00100000 /* special byte swap enable */
+#define POCMR_CM_MASK 0x000fffff
+#define POCMR_CM_4G 0x00000000
+#define POCMR_CM_2G 0x00080000
+#define POCMR_CM_1G 0x000C0000
+#define POCMR_CM_512M 0x000E0000
+#define POCMR_CM_256M 0x000F0000
+#define POCMR_CM_128M 0x000F8000
+#define POCMR_CM_64M 0x000FC000
+#define POCMR_CM_32M 0x000FE000
+#define POCMR_CM_16M 0x000FF000
+#define POCMR_CM_8M 0x000FF800
+#define POCMR_CM_4M 0x000FFC00
+#define POCMR_CM_2M 0x000FFE00
+#define POCMR_CM_1M 0x000FFF00
+#define POCMR_CM_512K 0x000FFF80
+#define POCMR_CM_256K 0x000FFFC0
+#define POCMR_CM_128K 0x000FFFE0
+#define POCMR_CM_64K 0x000FFFF0
+#define POCMR_CM_32K 0x000FFFF8
+#define POCMR_CM_16K 0x000FFFFC
+#define POCMR_CM_8K 0x000FFFFE
+#define POCMR_CM_4K 0x000FFFFF
+
+/*
+ * Sequencer
+ */
+typedef struct ios512x {
+ pot512x_t pot[6];
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
+} ios512x_t;
+
+/*
+ * PCI Controller
+ */
+typedef struct pcictrl512x {
+ u32 esr;
+ u32 ecdr;
+ u32 eer;
+ u32 eatcr;
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
+} pcictrl512x_t;
+
+
+/* PITAR - PCI Inbound Translation Address Register
+ */
+#define PITAR_TA_MASK 0x000fffff
+
+/* PIBAR - PCI Inbound Base/Extended Address Register
+ */
+#define PIBAR_MASK 0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+
+/* PIWAR - PCI Inbound Windows Attributes Register
+ */
+#define PIWAR_EN 0x80000000
+#define PIWAR_SBS 0x40000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+
+/*
+ * MSCAN
+ */
+typedef struct mscan512x {
+ u8 fixme[0x100];
+} mscan512x_t;
+
+/*
+ * BDLC
+ */
+typedef struct bdlc512x {
+ u8 fixme[0x100];
+} bdlc512x_t;
+
+/*
+ * SDHC
+ */
+typedef struct sdhc512x {
+ u8 fixme[0x100];
+} sdhc512x_t;
+
+/*
+ * SPDIF
+ */
+typedef struct spdif512x {
+ u8 fixme[0x100];
+} spdif512x_t;
+
+/*
+ * I2C
+ */
+typedef struct i2c512x_dev {
+ volatile u32 madr; /* I2Cn + 0x00 */
+ volatile u32 mfdr; /* I2Cn + 0x04 */
+ volatile u32 mcr; /* I2Cn + 0x08 */
+ volatile u32 msr; /* I2Cn + 0x0C */
+ volatile u32 mdr; /* I2Cn + 0x10 */
+ u8 res0[0x0C];
+} i2c512x_dev_t;
+
+/* Number of I2C buses */
+#define I2C_BUS_CNT 3
+
+typedef struct i2c512x {
+ i2c512x_dev_t dev[I2C_BUS_CNT];
+ volatile u32 icr;
+ volatile u32 mifr;
+ u8 res0[0x98];
+} i2c512x_t;
+
+/* I2Cn control register bits */
+#define I2C_EN 0x80
+#define I2C_IEN 0x40
+#define I2C_STA 0x20
+#define I2C_TX 0x10
+#define I2C_TXAK 0x08
+#define I2C_RSTA 0x04
+#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
+
+/* I2Cn status register bits */
+#define I2C_CF 0x80
+#define I2C_AAS 0x40
+#define I2C_BB 0x20
+#define I2C_AL 0x10
+#define I2C_SRW 0x04
+#define I2C_IF 0x02
+#define I2C_RXAK 0x01
+
+/*
+ * AXE
+ */
+typedef struct axe512x {
+ u8 fixme[0x100];
+} axe512x_t;
+
+/*
+ * DIU
+ */
+typedef struct diu512x {
+ u8 fixme[0x100];
+} diu512x_t;
+
+/*
+ * CFM
+ */
+typedef struct cfm512x {
+ u8 fixme[0x100];
+} cfm512x_t;
+
+/*
+ * FEC
+ */
+typedef struct fec512x {
+ u32 fec_id; /* FEC_ID register */
+ u32 ievent; /* Interrupt event register */
+ u32 imask; /* Interrupt mask register */
+ u32 reserved_01;
+ u32 r_des_active; /* Receive ring updated flag */
+ u32 x_des_active; /* Transmit ring updated flag */
+ u32 reserved_02[3];
+ u32 ecntrl; /* Ethernet control register */
+ u32 reserved_03[6];
+ u32 mii_data; /* MII data register */
+ u32 mii_speed; /* MII speed register */
+ u32 reserved_04[7];
+ u32 mib_control; /* MIB control/status register */
+ u32 reserved_05[7];
+ u32 r_cntrl; /* Receive control register */
+ u32 r_hash; /* Receive hash */
+ u32 reserved_06[14];
+ u32 x_cntrl; /* Transmit control register */
+ u32 reserved_07[7];
+ u32 paddr1; /* Physical address low */
+ u32 paddr2; /* Physical address high + type field */
+ u32 op_pause; /* Opcode + pause duration */
+ u32 reserved_08[10];
+ u32 iaddr1; /* Upper 32 bits of individual hash table */
+ u32 iaddr2; /* Lower 32 bits of individual hash table */
+ u32 gaddr1; /* Upper 32 bits of group hash table */
+ u32 gaddr2; /* Lower 32 bits of group hash table */
+ u32 reserved_09[7];
+ u32 x_wmrk; /* Transmit FIFO watermark */
+ u32 reserved_10;
+ u32 r_bound; /* End of RAM */
+ u32 r_fstart; /* Receive FIFO start address */
+ u32 reserved_11[11];
+ u32 r_des_start; /* Beginning of receive descriptor ring */
+ u32 x_des_start; /* Pointer to beginning of transmit descriptor ring */
+ u32 r_buff_size; /* Receive buffer size */
+ u32 reserved_12[26];
+ u32 dma_control; /* DMA control for IP bus, AMBA IF + DMA revision */
+ u32 reserved_13[2];
+
+ u32 mib[128]; /* MIB Block Counters */
+
+ u32 fifo[256]; /* used by FEC, can only be accessed by DMA */
+} fec512x_t;
+
+/*
+ * ULPI
+ */
+typedef struct ulpi512x {
+ u8 fixme[0x600];
+} ulpi512x_t;
+
+/*
+ * UTMI
+ */
+typedef struct utmi512x {
+ u8 fixme[0x3000];
+} utmi512x_t;
+
+/*
+ * PCI DMA
+ */
+typedef struct pcidma512x {
+ u8 fixme[0x300];
+} pcidma512x_t;
+
+/*
+ * IO Control
+ */
+typedef struct ioctrl512x {
+ u32 io_control_mem; /* MEM pad ctrl reg */
+ u32 io_control_gp; /* GP pad ctrl reg */
+ u32 io_control_lpc_clk; /* LPC_CLK pad ctrl reg */
+ u32 io_control_lpc_oe; /* LPC_OE pad ctrl reg */
+ u32 io_control_lpc_rw; /* LPC_R/W pad ctrl reg */
+ u32 io_control_lpc_ack; /* LPC_ACK pad ctrl reg */
+ u32 io_control_lpc_cs0; /* LPC_CS0 pad ctrl reg */
+ u32 io_control_nfc_ce0; /* NFC_CE0 pad ctrl reg */
+ u32 io_control_lpc_cs1; /* LPC_CS1 pad ctrl reg */
+ u32 io_control_lpc_cs2; /* LPC_CS2 pad ctrl reg */
+ u32 io_control_lpc_ax03; /* LPC_AX03 pad ctrl reg */
+ u32 io_control_emb_ax02; /* EMB_AX02 pad ctrl reg */
+ u32 io_control_emb_ax01; /* EMB_AX01 pad ctrl reg */
+ u32 io_control_emb_ax00; /* EMB_AX00 pad ctrl reg */
+ u32 io_control_emb_ad31; /* EMB_AD31 pad ctrl reg */
+ u32 io_control_emb_ad30; /* EMB_AD30 pad ctrl reg */
+ u32 io_control_emb_ad29; /* EMB_AD29 pad ctrl reg */
+ u32 io_control_emb_ad28; /* EMB_AD28 pad ctrl reg */
+ u32 io_control_emb_ad27; /* EMB_AD27 pad ctrl reg */
+ u32 io_control_emb_ad26; /* EMB_AD26 pad ctrl reg */
+ u32 io_control_emb_ad25; /* EMB_AD25 pad ctrl reg */
+ u32 io_control_emb_ad24; /* EMB_AD24 pad ctrl reg */
+ u32 io_control_emb_ad23; /* EMB_AD23 pad ctrl reg */
+ u32 io_control_emb_ad22; /* EMB_AD22 pad ctrl reg */
+ u32 io_control_emb_ad21; /* EMB_AD21 pad ctrl reg */
+ u32 io_control_emb_ad20; /* EMB_AD20 pad ctrl reg */
+ u32 io_control_emb_ad19; /* EMB_AD19 pad ctrl reg */
+ u32 io_control_emb_ad18; /* EMB_AD18 pad ctrl reg */
+ u32 io_control_emb_ad17; /* EMB_AD17 pad ctrl reg */
+ u32 io_control_emb_ad16; /* EMB_AD16 pad ctrl reg */
+ u32 io_control_emb_ad15; /* EMB_AD15 pad ctrl reg */
+ u32 io_control_emb_ad14; /* EMB_AD14 pad ctrl reg */
+ u32 io_control_emb_ad13; /* EMB_AD13 pad ctrl reg */
+ u32 io_control_emb_ad12; /* EMB_AD12 pad ctrl reg */
+ u32 io_control_emb_ad11; /* EMB_AD11 pad ctrl reg */
+ u32 io_control_emb_ad10; /* EMB_AD10 pad ctrl reg */
+ u32 io_control_emb_ad09; /* EMB_AD09 pad ctrl reg */
+ u32 io_control_emb_ad08; /* EMB_AD08 pad ctrl reg */
+ u32 io_control_emb_ad07; /* EMB_AD07 pad ctrl reg */
+ u32 io_control_emb_ad06; /* EMB_AD06 pad ctrl reg */
+ u32 io_control_emb_ad05; /* EMB_AD05 pad ctrl reg */
+ u32 io_control_emb_ad04; /* EMB_AD04 pad ctrl reg */
+ u32 io_control_emb_ad03; /* EMB_AD03 pad ctrl reg */
+ u32 io_control_emb_ad02; /* EMB_AD02 pad ctrl reg */
+ u32 io_control_emb_ad01; /* EMB_AD01 pad ctrl reg */
+ u32 io_control_emb_ad00; /* EMB_AD00 pad ctrl reg */
+ u32 io_control_pata_ce1; /* PATA_CE1 pad ctrl reg */
+ u32 io_control_pata_ce2; /* PATA_CE2 pad ctrl reg */
+ u32 io_control_pata_isolate; /* PATA_ISOLATE pad ctrl reg */
+ u32 io_control_pata_ior; /* PATA_IOR pad ctrl reg */
+ u32 io_control_pata_iow; /* PATA_IOW pad ctrl reg */
+ u32 io_control_pata_iochrdy; /* PATA_IOCHRDY pad ctrl reg */
+ u32 io_control_pata_intrq; /* PATA_INTRQ pad ctrl reg */
+ u32 io_control_pata_drq; /* PATA_DRQ pad ctrl reg */
+ u32 io_control_pata_dack; /* PATA_DACK pad ctrl reg */
+ u32 io_control_nfc_wp; /* NFC_WP pad ctrl reg */
+ u32 io_control_nfc_rb; /* NFC_RB pad ctrl reg */
+ u32 io_control_nfc_ale; /* NFC_ALE pad ctrl reg */
+ u32 io_control_nfc_cle; /* NFC_CLE pad ctrl reg */
+ u32 io_control_nfc_we; /* NFC_WE pad ctrl reg */
+ u32 io_control_nfc_re; /* NFC_RE pad ctrl reg */
+ u32 io_control_pci_ad31; /* PCI_AD31 pad ctrl reg */
+ u32 io_control_pci_ad30; /* PCI_AD30 pad ctrl reg */
+ u32 io_control_pci_ad29; /* PCI_AD29 pad ctrl reg */
+ u32 io_control_pci_ad28; /* PCI_AD28 pad ctrl reg */
+ u32 io_control_pci_ad27; /* PCI_AD27 pad ctrl reg */
+ u32 io_control_pci_ad26; /* PCI_AD26 pad ctrl reg */
+ u32 io_control_pci_ad25; /* PCI_AD25 pad ctrl reg */
+ u32 io_control_pci_ad24; /* PCI_AD24 pad ctrl reg */
+ u32 io_control_pci_ad23; /* PCI_AD23 pad ctrl reg */
+ u32 io_control_pci_ad22; /* PCI_AD22 pad ctrl reg */
+ u32 io_control_pci_ad21; /* PCI_AD21 pad ctrl reg */
+ u32 io_control_pci_ad20; /* PCI_AD20 pad ctrl reg */
+ u32 io_control_pci_ad19; /* PCI_AD19 pad ctrl reg */
+ u32 io_control_pci_ad18; /* PCI_AD18 pad ctrl reg */
+ u32 io_control_pci_ad17; /* PCI_AD17 pad ctrl reg */
+ u32 io_control_pci_ad16; /* PCI_AD16 pad ctrl reg */
+ u32 io_control_pci_ad15; /* PCI_AD15 pad ctrl reg */
+ u32 io_control_pci_ad14; /* PCI_AD14 pad ctrl reg */
+ u32 io_control_pci_ad13; /* PCI_AD13 pad ctrl reg */
+ u32 io_control_pci_ad12; /* PCI_AD12 pad ctrl reg */
+ u32 io_control_pci_ad11; /* PCI_AD11 pad ctrl reg */
+ u32 io_control_pci_ad10; /* PCI_AD10 pad ctrl reg */
+ u32 io_control_pci_ad09; /* PCI_AD09 pad ctrl reg */
+ u32 io_control_pci_ad08; /* PCI_AD08 pad ctrl reg */
+ u32 io_control_pci_ad07; /* PCI_AD07 pad ctrl reg */
+ u32 io_control_pci_ad06; /* PCI_AD06 pad ctrl reg */
+ u32 io_control_pci_ad05; /* PCI_AD05 pad ctrl reg */
+ u32 io_control_pci_ad04; /* PCI_AD04 pad ctrl reg */
+ u32 io_control_pci_ad03; /* PCI_AD03 pad ctrl reg */
+ u32 io_control_pci_ad02; /* PCI_AD02 pad ctrl reg */
+ u32 io_control_pci_ad01; /* PCI_AD01 pad ctrl reg */
+ u32 io_control_pci_ad00; /* PCI_AD00 pad ctrl reg */
+ u32 io_control_pci_cbe0; /* PCI_CBE0 pad ctrl reg */
+ u32 io_control_pci_cbe1; /* PCI_CBE1 pad ctrl reg */
+ u32 io_control_pci_cbe2; /* PCI_CBE2 pad ctrl reg */
+ u32 io_control_pci_cbe3; /* PCI_CBE3 pad ctrl reg */
+ u32 io_control_pci_grant2; /* PCI_GRANT2 pad ctrl reg */
+ u32 io_control_pci_req2; /* PCI_REQ2 pad ctrl reg */
+ u32 io_control_pci_grant1; /* PCI_GRANT1 pad ctrl reg */
+ u32 io_control_pci_req1; /* PCI_REQ1 pad ctrl reg */
+ u32 io_control_pci_grant0; /* PCI_GRANT0 pad ctrl reg */
+ u32 io_control_pci_req0; /* PCI_REQ0 pad ctrl reg */
+ u32 io_control_pci_inta; /* PCI_INTA pad ctrl reg */
+ u32 io_control_pci_clk; /* PCI_CLK pad ctrl reg */
+ u32 io_control_pci_rst; /* PCI_RST- pad ctrl reg */
+ u32 io_control_pci_frame; /* PCI_FRAME pad ctrl reg */
+ u32 io_control_pci_idsel; /* PCI_IDSEL pad ctrl reg */
+ u32 io_control_pci_devsel; /* PCI_DEVSEL pad ctrl reg */
+ u32 io_control_pci_irdy; /* PCI_IRDY pad ctrl reg */
+ u32 io_control_pci_trdy; /* PCI_TRDY pad ctrl reg */
+ u32 io_control_pci_stop; /* PCI_STOP pad ctrl reg */
+ u32 io_control_pci_par; /* PCI_PAR pad ctrl reg */
+ u32 io_control_pci_perr; /* PCI_PERR pad ctrl reg */
+ u32 io_control_pci_serr; /* PCI_SERR pad ctrl reg */
+ u32 io_control_spdif_txclk; /* SPDIF_TXCLK pad ctrl reg */
+ u32 io_control_spdif_tx; /* SPDIF_TX pad ctrl reg */
+ u32 io_control_spdif_rx; /* SPDIF_RX pad ctrl reg */
+ u32 io_control_i2c0_scl; /* I2C0_SCL pad ctrl reg */
+ u32 io_control_i2c0_sda; /* I2C0_SDA pad ctrl reg */
+ u32 io_control_i2c1_scl; /* I2C1_SCL pad ctrl reg */
+ u32 io_control_i2c1_sda; /* I2C1_SDA pad ctrl reg */
+ u32 io_control_i2c2_scl; /* I2C2_SCL pad ctrl reg */
+ u32 io_control_i2c2_sda; /* I2C2_SDA pad ctrl reg */
+ u32 io_control_irq0; /* IRQ0 pad ctrl reg */
+ u32 io_control_irq1; /* IRQ1 pad ctrl reg */
+ u32 io_control_can1_tx; /* CAN1_TX pad ctrl reg */
+ u32 io_control_can2_tx; /* CAN2_TX pad ctrl reg */
+ u32 io_control_j1850_tx; /* J1850_TX pad ctrl reg */
+ u32 io_control_j1850_rx; /* J1850_RX pad ctrl reg */
+ u32 io_control_psc_mclk_in; /* PSC_MCLK_IN pad ctrl reg */
+ u32 io_control_psc0_0; /* PSC0_0 pad ctrl reg */
+ u32 io_control_psc0_1; /* PSC0_1 pad ctrl reg */
+ u32 io_control_psc0_2; /* PSC0_2 pad ctrl reg */
+ u32 io_control_psc0_3; /* PSC0_3 pad ctrl reg */
+ u32 io_control_psc0_4; /* PSC0_4 pad ctrl reg */
+ u32 io_control_psc1_0; /* PSC1_0 pad ctrl reg */
+ u32 io_control_psc1_1; /* PSC1_1 pad ctrl reg */
+ u32 io_control_psc1_2; /* PSC1_2 pad ctrl reg */
+ u32 io_control_psc1_3; /* PSC1_3 pad ctrl reg */
+ u32 io_control_psc1_4; /* PSC1_4 pad ctrl reg */
+ u32 io_control_psc2_0; /* PSC2_0 pad ctrl reg */
+ u32 io_control_psc2_1; /* PSC2_1 pad ctrl reg */
+ u32 io_control_psc2_2; /* PSC2_2 pad ctrl reg */
+ u32 io_control_psc2_3; /* PSC2_3 pad ctrl reg */
+ u32 io_control_psc2_4; /* PSC2_4 pad ctrl reg */
+ u32 io_control_psc3_0; /* PSC3_0 pad ctrl reg */
+ u32 io_control_psc3_1; /* PSC3_1 pad ctrl reg */
+ u32 io_control_psc3_2; /* PSC3_2 pad ctrl reg */
+ u32 io_control_psc3_3; /* PSC3_3 pad ctrl reg */
+ u32 io_control_psc3_4; /* PSC3_4 pad ctrl reg */
+ u32 io_control_psc4_0; /* PSC4_0 pad ctrl reg */
+ u32 io_control_psc4_1; /* PSC4_1 pad ctrl reg */
+ u32 io_control_psc4_2; /* PSC4_2 pad ctrl reg */
+ u32 io_control_psc4_3; /* PSC4_3 pad ctrl reg */
+ u32 io_control_psc4_4; /* PSC4_4 pad ctrl reg */
+ u32 io_control_psc5_0; /* PSC5_0 pad ctrl reg */
+ u32 io_control_psc5_1; /* PSC5_1 pad ctrl reg */
+ u32 io_control_psc5_2; /* PSC5_2 pad ctrl reg */
+ u32 io_control_psc5_3; /* PSC5_3 pad ctrl reg */
+ u32 io_control_psc5_4; /* PSC5_4 pad ctrl reg */
+ u32 io_control_psc6_0; /* PSC6_0 pad ctrl reg */
+ u32 io_control_psc6_1; /* PSC6_1 pad ctrl reg */
+ u32 io_control_psc6_2; /* PSC6_2 pad ctrl reg */
+ u32 io_control_psc6_3; /* PSC6_3 pad ctrl reg */
+ u32 io_control_psc6_4; /* PSC6_4 pad ctrl reg */
+ u32 io_control_psc7_0; /* PSC7_0 pad ctrl reg */
+ u32 io_control_psc7_1; /* PSC7_1 pad ctrl reg */
+ u32 io_control_psc7_2; /* PSC7_2 pad ctrl reg */
+ u32 io_control_psc7_3; /* PSC7_3 pad ctrl reg */
+ u32 io_control_psc7_4; /* PSC7_4 pad ctrl reg */
+ u32 io_control_psc8_0; /* PSC8_0 pad ctrl reg */
+ u32 io_control_psc8_1; /* PSC8_1 pad ctrl reg */
+ u32 io_control_psc8_2; /* PSC8_2 pad ctrl reg */
+ u32 io_control_psc8_3; /* PSC8_3 pad ctrl reg */
+ u32 io_control_psc8_4; /* PSC8_4 pad ctrl reg */
+ u32 io_control_psc9_0; /* PSC9_0 pad ctrl reg */
+ u32 io_control_psc9_1; /* PSC9_1 pad ctrl reg */
+ u32 io_control_psc9_2; /* PSC9_2 pad ctrl reg */
+ u32 io_control_psc9_3; /* PSC9_3 pad ctrl reg */
+ u32 io_control_psc9_4; /* PSC9_4 pad ctrl reg */
+ u32 io_control_psc10_0; /* PSC10_0 pad ctrl reg */
+ u32 io_control_psc10_1; /* PSC10_1 pad ctrl reg */
+ u32 io_control_psc10_2; /* PSC10_2 pad ctrl reg */
+ u32 io_control_psc10_3; /* PSC10_3 pad ctrl reg */
+ u32 io_control_psc10_4; /* PSC10_4 pad ctrl reg */
+ u32 io_control_psc11_0; /* PSC11_0 pad ctrl reg */
+ u32 io_control_psc11_1; /* PSC11_1 pad ctrl reg */
+ u32 io_control_psc11_2; /* PSC11_2 pad ctrl reg */
+ u32 io_control_psc11_3; /* PSC11_3 pad ctrl reg */
+ u32 io_control_psc11_4; /* PSC11_4 pad ctrl reg */
+ u32 io_control_ckstp_out; /* CKSTP_OUT pad ctrl reg */
+ u32 io_control_usb_phy_drvvbus; /* USB2_DRVVBUS pad ctrl reg */
+ u8 reserved[0x0cfc]; /* fill to 4096 bytes size */
+} ioctrl512x_t;
+
+/* Indexes in regs array */
+/* Set for DDR */
+#define IOCTRL_MUX_DDR 0x00000036
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
+#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
+#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
+#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
+#define IO_PIN_DS(v) ((v)) /* slew rate */
+
+typedef struct iopin_t {
+ int p_offset; /* offset from IOCTL_MEM_OFFSET */
+ int nr_pins; /* number of pins to set this way */
+ int bit_or; /* or in the value instead of overwrite */
+ u_long val; /* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+
+/*
+ * IIM
+ */
+typedef struct iim512x {
+ u32 stat; /* IIM status register */
+ u32 statm; /* IIM status IRQ mask */
+ u32 err; /* IIM errors register */
+ u32 emask; /* IIM error IRQ mask */
+ u32 fctl; /* IIM fuse control register */
+ u32 ua; /* IIM upper address register */
+ u32 la; /* IIM lower address register */
+ u32 sdat; /* IIM explicit sense data */
+ u8 res0[0x08];
+ u32 prg_p; /* IIM program protection register */
+ u8 res1[0x10];
+ u32 divide; /* IIM divide factor register */
+ u8 res2[0x7c0];
+ u32 fbac0; /* IIM fuse bank 0 prot (for Freescale use) */
+ u32 fb0w0[0x1f]; /* IIM fuse bank 0 data (for Freescale use) */
+ u8 res3[0x380];
+ u32 fbac1; /* IIM fuse bank 1 protection */
+ u32 fb1w1[0x01f]; /* IIM fuse bank 1 data */
+ u8 res4[0x380];
+} iim512x_t;
+
+/*
+ * LPC
+ */
+typedef struct lpc512x {
+ u32 cs_cfg[8]; /* Chip Select N Configuration Registers
+ No dedicated entry for CS Boot as == CS0 */
+ u32 cs_cr; /* Chip Select Control Register */
+ u32 cs_sr; /* Chip Select Status Register */
+ u32 cs_bcr; /* Chip Select Burst Control Register */
+ u32 cs_dccr; /* Chip Select Deadcycle Control Register */
+ u32 cs_hccr; /* Chip Select Holdcycle Control Register */
+ u32 altr; /* Address Latch Timing Register */
+ u8 res0[0xc8];
+ u32 sclpc_psr; /* SCLPC Packet Size Register */
+ u32 sclpc_sar; /* SCLPC Start Address Register */
+ u32 sclpc_cr; /* SCLPC Control Register */
+ u32 sclpc_er; /* SCLPC Enable Register */
+ u32 sclpc_nar; /* SCLPC NextAddress Register */
+ u32 sclpc_sr; /* SCLPC Status Register */
+ u32 sclpc_bdr; /* SCLPC Bytes Done Register */
+ u32 emb_scr; /* EMB Share Counter Register */
+ u32 emb_pcr; /* EMB Pause Control Register */
+ u8 res1[0x1c];
+ u32 lpc_fdwr; /* LPC RX/TX FIFO Data Word Register */
+ u32 lpc_fsr; /* LPC RX/TX FIFO Status Register */
+ u32 lpc_cr; /* LPC RX/TX FIFO Control Register */
+ u32 lpc_ar; /* LPC RX/TX FIFO Alarm Register */
+ u8 res2[0xb0];
+} lpc512x_t;
+
+/*
+ * PATA
+ */
+typedef struct pata512x {
+ /* LOCAL Registers */
+ u32 pata_time1; /* Time register 1: PIO and tx timing parameter */
+ u32 pata_time2; /* Time register 2: PIO timing parameter */
+ u32 pata_time3; /* Time register 3: PIO and MDMA timing parameter */
+ u32 pata_time4; /* Time register 4: MDMA and UDMA timing parameter */
+ u32 pata_time5; /* Time register 5: UDMA timing parameter */
+ u32 pata_time6; /* Time register 6: UDMA timing parameter */
+ u32 pata_fifo_data32; /* 32bit wide dataport to/from FIFO */
+ u32 pata_fifo_data16; /* 16bit wide dataport to/from FIFO */
+ u32 pata_fifo_fill; /* FIFO filling in halfwords (READONLY)*/
+ u32 pata_ata_control; /* ATA Interface control register */
+ u32 pata_irq_pending; /* Interrupt pending register (READONLY) */
+ u32 pata_irq_enable; /* Interrupt enable register */
+ u32 pata_irq_clear; /* Interrupt clear register (WRITEONLY)*/
+ u32 pata_fifo_alarm; /* fifo alarm threshold */
+ u32 res1[0x1A];
+ /* DRIVE Registers */
+ u32 pata_drive_data; /* drive data register*/
+ u32 pata_drive_features;/* drive features register */
+ u32 pata_drive_sectcnt; /* drive sector count register */
+ u32 pata_drive_sectnum; /* drive sector number register */
+ u32 pata_drive_cyllow; /* drive cylinder low register */
+ u32 pata_drive_cylhigh; /* drive cylinder high register */
+ u32 pata_drive_dev_head;/* drive device head register */
+ u32 pata_drive_command; /* write = drive command, read = drive status reg */
+ u32 res2[0x06];
+ u32 pata_drive_alt_stat;/* write = drive control, read = drive alt status reg */
+ u32 res3[0x09];
+} pata512x_t;
+
+/*
+ * PSC
+ */
+typedef struct psc512x {
+ volatile u8 mode; /* PSC + 0x00 */
+ volatile u8 res0[3];
+ union { /* PSC + 0x04 */
+ volatile u16 status;
+ volatile u16 clock_select;
+ } sr_csr;
+#define psc_status sr_csr.status
+#define psc_clock_select sr_csr.clock_select
+ volatile u16 res1;
+ volatile u8 command; /* PSC + 0x08 */
+ volatile u8 res2[3];
+ union { /* PSC + 0x0c */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } buffer;
+#define psc_buffer_8 buffer.buffer_8
+#define psc_buffer_16 buffer.buffer_16
+#define psc_buffer_32 buffer.buffer_32
+ union { /* PSC + 0x10 */
+ volatile u8 ipcr;
+ volatile u8 acr;
+ } ipcr_acr;
+#define psc_ipcr ipcr_acr.ipcr
+#define psc_acr ipcr_acr.acr
+ volatile u8 res3[3];
+ union { /* PSC + 0x14 */
+ volatile u16 isr;
+ volatile u16 imr;
+ } isr_imr;
+#define psc_isr isr_imr.isr
+#define psc_imr isr_imr.imr
+ volatile u16 res4;
+ volatile u8 ctur; /* PSC + 0x18 */
+ volatile u8 res5[3];
+ volatile u8 ctlr; /* PSC + 0x1c */
+ volatile u8 res6[3];
+ volatile u32 ccr; /* PSC + 0x20 */
+ volatile u8 res7[12];
+ volatile u8 ivr; /* PSC + 0x30 */
+ volatile u8 res8[3];
+ volatile u8 ip; /* PSC + 0x34 */
+ volatile u8 res9[3];
+ volatile u8 op1; /* PSC + 0x38 */
+ volatile u8 res10[3];
+ volatile u8 op0; /* PSC + 0x3c */
+ volatile u8 res11[3];
+ volatile u32 sicr; /* PSC + 0x40 */
+ volatile u8 res12[60];
+ volatile u32 tfcmd; /* PSC + 0x80 */
+ volatile u32 tfalarm; /* PSC + 0x84 */
+ volatile u32 tfstat; /* PSC + 0x88 */
+ volatile u32 tfintstat; /* PSC + 0x8C */
+ volatile u32 tfintmask; /* PSC + 0x90 */
+ volatile u32 tfcount; /* PSC + 0x94 */
+ volatile u16 tfwptr; /* PSC + 0x98 */
+ volatile u16 tfrptr; /* PSC + 0x9A */
+ volatile u32 tfsize; /* PSC + 0x9C */
+ volatile u8 res13[28];
+ union { /* PSC + 0xBC */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } tfdata_buffer;
+#define tfdata_8 tfdata_buffer.buffer_8
+#define tfdata_16 tfdata_buffer.buffer_16
+#define tfdata_32 tfdata_buffer.buffer_32
+
+ volatile u32 rfcmd; /* PSC + 0xC0 */
+ volatile u32 rfalarm; /* PSC + 0xC4 */
+ volatile u32 rfstat; /* PSC + 0xC8 */
+ volatile u32 rfintstat; /* PSC + 0xCC */
+ volatile u32 rfintmask; /* PSC + 0xD0 */
+ volatile u32 rfcount; /* PSC + 0xD4 */
+ volatile u16 rfwptr; /* PSC + 0xD8 */
+ volatile u16 rfrptr; /* PSC + 0xDA */
+ volatile u32 rfsize; /* PSC + 0xDC */
+ volatile u8 res18[28];
+ union { /* PSC + 0xFC */
+ volatile u8 buffer_8;
+ volatile u16 buffer_16;
+ volatile u32 buffer_32;
+ } rfdata_buffer;
+#define rfdata_8 rfdata_buffer.buffer_8
+#define rfdata_16 rfdata_buffer.buffer_16
+#define rfdata_32 rfdata_buffer.buffer_32
+} psc512x_t;
+
+/* PSC FIFO Command values */
+#define PSC_FIFO_RESET_SLICE 0x80
+#define PSC_FIFO_ENABLE_SLICE 0x01
+
+/* PSC FIFO Controller Command values */
+#define FIFOC_ENABLE_CLOCK_GATE 0x01
+#define FIFOC_DISABLE_CLOCK_GATE 0x00
+
+/* PSC FIFO status */
+#define PSC_FIFO_EMPTY 0x01
+
+/* PSC Command values */
+#define PSC_RX_ENABLE 0x01
+#define PSC_RX_DISABLE 0x02
+#define PSC_TX_ENABLE 0x04
+#define PSC_TX_DISABLE 0x08
+#define PSC_SEL_MODE_REG_1 0x10
+#define PSC_RST_RX 0x20
+#define PSC_RST_TX 0x30
+#define PSC_RST_ERR_STAT 0x40
+#define PSC_RST_BRK_CHG_INT 0x50
+#define PSC_START_BRK 0x60
+#define PSC_STOP_BRK 0x70
+
+/* PSC status register bits */
+#define PSC_SR_CDE 0x0080
+#define PSC_SR_TXEMP 0x0800
+#define PSC_SR_OE 0x1000
+#define PSC_SR_PE 0x2000
+#define PSC_SR_FE 0x4000
+#define PSC_SR_RB 0x8000
+
+/* PSC mode fields */
+#define PSC_MODE_5_BITS 0x00
+#define PSC_MODE_6_BITS 0x01
+#define PSC_MODE_7_BITS 0x02
+#define PSC_MODE_8_BITS 0x03
+#define PSC_MODE_PAREVEN 0x00
+#define PSC_MODE_PARODD 0x04
+#define PSC_MODE_PARFORCE 0x08
+#define PSC_MODE_PARNONE 0x10
+#define PSC_MODE_ENTIMEOUT 0x20
+#define PSC_MODE_RXRTS 0x80
+#define PSC_MODE_1_STOPBIT 0x07
+
+/*
+ * FIFOC
+ */
+typedef struct fifoc512x {
+ u32 fifoc_cmd;
+ u32 fifoc_int;
+ u32 fifoc_dma;
+ u32 fifoc_axe;
+ u32 fifoc_debug;
+ u8 fixme[0xEC];
+} fifoc512x_t;
+
+/*
+ * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
+ *
+ * NOTE: individual PSC units are free to use whatever area (and size) of the
+ * FIFOC internal memory, so make sure memory areas for FIFO slices used by
+ * different PSCs do not overlap!
+ *
+ * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
+ * tests indicate that it is 1024 words total.
+ */
+#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */
+#define FIFOC_PSC0_TX_ADDR 0x0
+#define FIFOC_PSC0_RX_SIZE 0x0
+#define FIFOC_PSC0_RX_ADDR 0x0
+
+#define FIFOC_PSC1_TX_SIZE 0x0
+#define FIFOC_PSC1_TX_ADDR 0x0
+#define FIFOC_PSC1_RX_SIZE 0x0
+#define FIFOC_PSC1_RX_ADDR 0x0
+
+#define FIFOC_PSC2_TX_SIZE 0x0
+#define FIFOC_PSC2_TX_ADDR 0x0
+#define FIFOC_PSC2_RX_SIZE 0x0
+#define FIFOC_PSC2_RX_ADDR 0x0
+
+#define FIFOC_PSC3_TX_SIZE 0x04
+#define FIFOC_PSC3_TX_ADDR 0x0
+#define FIFOC_PSC3_RX_SIZE 0x04
+#define FIFOC_PSC3_RX_ADDR 0x10
+
+#define FIFOC_PSC4_TX_SIZE 0x0
+#define FIFOC_PSC4_TX_ADDR 0x0
+#define FIFOC_PSC4_RX_SIZE 0x0
+#define FIFOC_PSC4_RX_ADDR 0x0
+
+#define FIFOC_PSC5_TX_SIZE 0x0
+#define FIFOC_PSC5_TX_ADDR 0x0
+#define FIFOC_PSC5_RX_SIZE 0x0
+#define FIFOC_PSC5_RX_ADDR 0x0
+
+#define FIFOC_PSC6_TX_SIZE 0x0
+#define FIFOC_PSC6_TX_ADDR 0x0
+#define FIFOC_PSC6_RX_SIZE 0x0
+#define FIFOC_PSC6_RX_ADDR 0x0
+
+#define FIFOC_PSC7_TX_SIZE 0x0
+#define FIFOC_PSC7_TX_ADDR 0x0
+#define FIFOC_PSC7_RX_SIZE 0x0
+#define FIFOC_PSC7_RX_ADDR 0x0
+
+#define FIFOC_PSC8_TX_SIZE 0x0
+#define FIFOC_PSC8_TX_ADDR 0x0
+#define FIFOC_PSC8_RX_SIZE 0x0
+#define FIFOC_PSC8_RX_ADDR 0x0
+
+#define FIFOC_PSC9_TX_SIZE 0x0
+#define FIFOC_PSC9_TX_ADDR 0x0
+#define FIFOC_PSC9_RX_SIZE 0x0
+#define FIFOC_PSC9_RX_ADDR 0x0
+
+#define FIFOC_PSC10_TX_SIZE 0x0
+#define FIFOC_PSC10_TX_ADDR 0x0
+#define FIFOC_PSC10_RX_SIZE 0x0
+#define FIFOC_PSC10_RX_ADDR 0x0
+
+#define FIFOC_PSC11_TX_SIZE 0x0
+#define FIFOC_PSC11_TX_ADDR 0x0
+#define FIFOC_PSC11_RX_SIZE 0x0
+#define FIFOC_PSC11_RX_ADDR 0x0
+
+/*
+ * SATA
+ */
+typedef struct sata512x {
+ u8 fixme[0x2000];
+} sata512x_t;
+
+typedef struct immap {
+ sysconf512x_t sysconf; /* System configuration */
+ u8 res0[0x700];
+ wdt512x_t wdt; /* Watch Dog Timer (WDT) */
+ rtclk512x_t rtc; /* Real Time Clock Module */
+ gpt512x_t gpt; /* General Purpose Timer */
+ ipic512x_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter512x_t arbiter; /* CSB Arbiter */
+ reset512x_t reset; /* Reset Module */
+ clk512x_t clk; /* Clock Module */
+ pmc512x_t pmc; /* Power Management Control Module */
+ gpio512x_t gpio; /* General purpose I/O module */
+ u8 res1[0x100];
+ mscan512x_t mscan; /* MSCAN */
+ bdlc512x_t bdlc; /* BDLC */
+ sdhc512x_t sdhc; /* SDHC */
+ spdif512x_t spdif; /* SPDIF */
+ i2c512x_t i2c; /* I2C Controllers */
+ u8 res2[0x800];
+ axe512x_t axe; /* AXE */
+ diu512x_t diu; /* Display Interface Unit */
+ cfm512x_t cfm; /* Clock Frequency Measurement */
+ u8 res3[0x500];
+ fec512x_t fec; /* Fast Ethernet Controller */
+ ulpi512x_t ulpi; /* USB ULPI */
+ u8 res4[0xa00];
+ utmi512x_t utmi; /* USB UTMI */
+ u8 res5[0x1000];
+ pcidma512x_t pci_dma; /* PCI DMA */
+ pciconf512x_t pci_conf; /* PCI Configuration */
+ u8 res6[0x80];
+ ios512x_t ios; /* PCI Sequencer */
+ pcictrl512x_t pci_ctrl; /* PCI Controller Control and Status */
+ u8 res7[0xa00];
+ ddr512x_t mddrc; /* Multi-port DDR Memory Controller */
+ ioctrl512x_t io_ctrl; /* IO Control */
+ iim512x_t iim; /* IC Identification module */
+ u8 res8[0x4000];
+ lpc512x_t lpc; /* LocalPlus Controller */
+ pata512x_t pata; /* Parallel ATA */
+ u8 res9[0xd00];
+ psc512x_t psc[12]; /* PSCs */
+ u8 res10[0x300];
+ fifoc512x_t fifoc; /* FIFO Controller */
+ u8 res11[0x2000];
+ dma512x_t dma; /* DMA */
+ u8 res12[0xa800];
+ sata512x_t sata; /* Serial ATA */
+ u8 res13[0xde000];
+} immap_t;
+
+/* provide interface to get PATA base address */
+static inline u32 get_pata_base (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ return (u32)(&im->pata);
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* __IMMAP_512x__ */
--- /dev/null
+/*
+ * MPC8220 Internal Memory Map
+ * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * The Internal Memory Map of the 8220.
+ *
+ */
+#ifndef __IMMAP_MPC8220__
+#define __IMMAP_MPC8220__
+
+/*
+ * System configuration registers.
+ */
+typedef struct sys_conf {
+ u16 mbar; /* 0x00 */
+ u16 res1;
+
+ u16 res2; /* 0x04 */
+ u16 sdramds;
+
+ u32 res3[6]; /* 0x08 */
+
+ u32 cscfg[6]; /* 0x20 */
+
+ u32 res4[2]; /* 0x38 */
+
+ u8 res5[3]; /* 0x40 */
+ u8 rstctrl;
+
+ u8 res6[3]; /* 0x44 */
+ u8 rststat;
+
+ u32 res7[2]; /* 0x48 */
+
+ u32 jtagid; /* 0x50 */
+} sysconf8220_t;
+
+
+/*
+ * Memory controller registers.
+ */
+typedef struct mem_ctlr {
+ ushort mode; /* 0x100 */
+ ushort res1;
+ u32 ctrl; /* 0x104 */
+ u32 cfg1; /* 0x108 */
+ u32 cfg2; /* 0x10c */
+} memctl8220_t;
+
+/*
+ * XLB Arbitration registers
+ */
+typedef struct xlb_arb
+{
+ uint res1[16]; /* 0x200 */
+ uint config; /* 0x240 */
+ uint version; /* 0x244 */
+ uint status; /* 0x248 */
+ uint intEnable; /* 0x24c */
+ uint addrCap; /* 0x250 */
+ uint busSigCap; /* 0x254 */
+ uint addrTenTimeOut; /* 0x258 */
+ uint dataTenTimeOut; /* 0x25c */
+ uint busActTimeOut; /* 0x260 */
+ uint mastPriEn; /* 0x264 */
+ uint mastPriority; /* 0x268 */
+ uint baseAddr; /* 0x26c */
+} xlbarb8220_t;
+
+/*
+ * Flexbus registers
+ */
+typedef struct flexbus
+{
+ ushort csar0; /* 0x00 */
+ ushort res1;
+ uint csmr0; /* 0x04 */
+ uint cscr0; /* 0x08 */
+
+ ushort csar1; /* 0x0c */
+ ushort res2;
+ uint csmr1; /* 0x10 */
+ uint cscr1; /* 0x14 */
+
+ ushort csar2; /* 0x18 */
+ ushort res3;
+ uint csmr2; /* 0x1c */
+ uint cscr2; /* 0x20 */
+
+ ushort csar3; /* 0x24 */
+ ushort res4;
+ uint csmr3; /* 0x28 */
+ uint cscr3; /* 0x2c */
+
+ ushort csar4; /* 0x30 */
+ ushort res5;
+ uint csmr4; /* 0x34 */
+ uint cscr4; /* 0x38 */
+
+ ushort csar5; /* 0x3c */
+ ushort res6;
+ uint csmr5; /* 0x40 */
+ uint cscr5; /* 0x44 */
+} flexbus8220_t;
+
+/*
+ * GPIO registers
+ */
+typedef struct gpio
+{
+ u32 out; /* 0x00 */
+ u32 obs; /* 0x04 */
+ u32 obc; /* 0x08 */
+ u32 obt; /* 0x0c */
+ u32 en; /* 0x10 */
+ u32 ebs; /* 0x14 */
+ u32 ebc; /* 0x18 */
+ u32 ebt; /* 0x1c */
+ u32 mc; /* 0x20 */
+ u32 st; /* 0x24 */
+ u32 intr; /* 0x28 */
+} gpio8220_t;
+
+/*
+ * General Purpose Timer registers
+ */
+typedef struct gptimer
+{
+ u8 OCPW;
+ u8 OctIct;
+ u8 Control;
+ u8 Mode;
+
+ u16 Prescl; /* Prescale */
+ u16 Count; /* Count */
+
+ u16 PwmWid; /* PWM Width */
+ u8 PwmOp; /* Output Polarity */
+ u8 PwmLd; /* Immediate Update */
+
+ u16 Capture; /* Capture internal counter */
+ u8 OvfPin; /* Ovf and Pin */
+ u8 Int; /* Interrupts */
+} gptmr8220_t;
+
+/*
+ * PSC registers
+ */
+typedef struct psc
+{
+ u32 mr1_2; /* 0x00 Mode reg 1 & 2 */
+ u32 sr_csr; /* 0x04 Status/Clock Select reg */
+ u32 cr; /* 0x08 Command reg */
+ u8 xmitbuf[4]; /* 0x0c Receive/Transmit Buffer */
+ u32 ipcr_acr; /* 0x10 Input Port Change/Auxiliary Control reg */
+ u32 isr_imr; /* 0x14 Interrupt Status/Mask reg */
+ u32 ctur; /* 0x18 Counter Timer Upper reg */
+ u32 ctlr; /* 0x1c Counter Timer Lower reg */
+ u32 rsvd1[4]; /* 0x20 ... 0x2c */
+ u32 ivr; /* 0x30 Interrupt Vector reg */
+ u32 ipr; /* 0x34 Input Port reg */
+ u32 opsetr; /* 0x38 Output Port Set reg */
+ u32 opresetr; /* 0x3c Output Port Reset reg */
+ u32 sicr; /* 0x40 PSC/IrDA control reg */
+ u32 ircr1; /* 0x44 IrDA control reg 1*/
+ u32 ircr2; /* 0x48 IrDA control reg 2*/
+ u32 irsdr; /* 0x4c IrDA SIR Divide reg */
+ u32 irmdr; /* 0x50 IrDA MIR Divide reg */
+ u32 irfdr; /* 0x54 PSC IrDA FIR Divide reg */
+ u32 rfnum; /* 0x58 RX-FIFO counter */
+ u32 txnum; /* 0x5c TX-FIFO counter */
+ u32 rfdata; /* 0x60 RX-FIFO data */
+ u32 rfstat; /* 0x64 RX-FIFO status */
+ u32 rfcntl; /* 0x68 RX-FIFO control */
+ u32 rfalarm; /* 0x6c RX-FIFO alarm */
+ u32 rfrptr; /* 0x70 RX-FIFO read pointer */
+ u32 rfwptr; /* 0x74 RX-FIFO write pointer */
+ u32 rflfrptr; /* 0x78 RX-FIFO last read frame pointer */
+ u32 rflfwptr; /* 0x7c RX-FIFO last write frame pointer */
+
+ u32 tfdata; /* 0x80 TX-FIFO data */
+ u32 tfstat; /* 0x84 TX-FIFO status */
+ u32 tfcntl; /* 0x88 TX-FIFO control */
+ u32 tfalarm; /* 0x8c TX-FIFO alarm */
+ u32 tfrptr; /* 0x90 TX-FIFO read pointer */
+ u32 tfwptr; /* 0x94 TX-FIFO write pointer */
+ u32 tflfrptr; /* 0x98 TX-FIFO last read frame pointer */
+ u32 tflfwptr; /* 0x9c TX-FIFO last write frame pointer */
+} psc8220_t;
+
+/*
+ * Interrupt Controller registers
+ */
+typedef struct interrupt_controller {
+} intctl8220_t;
+
+
+/* Fast controllers
+*/
+
+/*
+ * I2C registers
+ */
+typedef struct i2c
+{
+ u8 adr; /* 0x00 */
+ u8 res1[3];
+ u8 fdr; /* 0x04 */
+ u8 res2[3];
+ u8 cr; /* 0x08 */
+ u8 res3[3];
+ u8 sr; /* 0x0C */
+ u8 res4[3];
+ u8 dr; /* 0x10 */
+ u8 res5[3];
+ u32 reserved0; /* 0x14 */
+ u32 reserved1; /* 0x18 */
+ u32 reserved2; /* 0x1c */
+ u8 icr; /* 0x20 */
+ u8 res6[3];
+} i2c8220_t;
+
+/*
+ * Port Configuration Registers
+ */
+typedef struct pcfg
+{
+ uint pcfg0; /* 0x00 */
+ uint pcfg1; /* 0x04 */
+ uint pcfg2; /* 0x08 */
+ uint pcfg3; /* 0x0c */
+} pcfg8220_t;
+
+/* ...and the whole thing wrapped up....
+*/
+typedef struct immap {
+ sysconf8220_t im_sysconf; /* System Configuration */
+ memctl8220_t im_memctl; /* Memory Controller */
+ xlbarb8220_t im_xlbarb; /* XLB Arbitration */
+ psc8220_t im_psc; /* PSC controller */
+ flexbus8220_t im_fb; /* FlexBus Controller */
+ i2c8220_t im_i2c; /* I2C control/status */
+ pcfg8220_t im_pcfg; /* Port configuration */
+} immap_t;
+
+#endif /* __IMMAP_MPC8220__ */
--- /dev/null
+/*
+ * MPC8260 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map of the 8260. I don't know how generic
+ * this will be, as I don't have any knowledge of the subsequent
+ * parts at this time. I copied this from the 8xx_immap.h.
+ */
+#ifndef __IMMAP_82XX__
+#define __IMMAP_82XX__
+
+/* System configuration registers.
+*/
+typedef struct sys_conf {
+ uint sc_siumcr;
+ uint sc_sypcr;
+ char res1[6];
+ ushort sc_swsr;
+ char res2[20];
+ uint sc_bcr;
+ u_char sc_ppc_acr;
+ char res3[3];
+ uint sc_ppc_alrh;
+ uint sc_ppc_alrl;
+ u_char sc_lcl_acr;
+ char res4[3];
+ uint sc_lcl_alrh;
+ uint sc_lcl_alrl;
+ uint sc_tescr1;
+ uint sc_tescr2;
+ uint sc_ltescr1;
+ uint sc_ltescr2;
+ uint sc_pdtea;
+ u_char sc_pdtem;
+ char res5[3];
+ uint sc_ldtea;
+ u_char sc_ldtem;
+ char res6[163];
+} sysconf8260_t;
+
+
+/* Memory controller registers.
+*/
+typedef struct mem_ctlr {
+ uint memc_br0;
+ uint memc_or0;
+ uint memc_br1;
+ uint memc_or1;
+ uint memc_br2;
+ uint memc_or2;
+ uint memc_br3;
+ uint memc_or3;
+ uint memc_br4;
+ uint memc_or4;
+ uint memc_br5;
+ uint memc_or5;
+ uint memc_br6;
+ uint memc_or6;
+ uint memc_br7;
+ uint memc_or7;
+ uint memc_br8;
+ uint memc_or8;
+ uint memc_br9;
+ uint memc_or9;
+ uint memc_br10;
+ uint memc_or10;
+ uint memc_br11;
+ uint memc_or11;
+ char res1[8];
+ uint memc_mar;
+ char res2[4];
+ uint memc_mamr;
+ uint memc_mbmr;
+ uint memc_mcmr;
+ char res3[8];
+ ushort memc_mptpr;
+ char res4[2];
+ uint memc_mdr;
+ char res5[4];
+ uint memc_psdmr;
+ uint memc_lsdmr;
+ u_char memc_purt;
+ char res6[3];
+ u_char memc_psrt;
+ char res7[3];
+ u_char memc_lurt;
+ char res8[3];
+ u_char memc_lsrt;
+ char res9[3];
+ uint memc_immr;
+ uint memc_pcibr0;
+ uint memc_pcibr1;
+ char res10[16];
+ uint memc_pcimsk0;
+ uint memc_pcimsk1;
+ char res11[52];
+} memctl8260_t;
+
+/* System Integration Timers.
+*/
+typedef struct sys_int_timers {
+ char res1[32];
+ ushort sit_tmcntsc;
+ char res2[2];
+ uint sit_tmcnt;
+ char res3[4];
+ uint sit_tmcntal;
+ char res4[16];
+ ushort sit_piscr;
+ char res5[2];
+ uint sit_pitc;
+ uint sit_pitr;
+ char res6[94];
+ char res7[390];
+} sit8260_t;
+
+/* PCI
+ */
+typedef struct pci_config {
+ uint pci_omisr;
+ uint pci_ominr;
+ char res1[8];
+ uint pci_ifqpr;
+ uint pci_ofqpr;
+ char res2[8];
+ uint pci_imr0;
+ uint pci_imr1;
+ uint pci_omr0;
+ uint pci_omr1;
+ uint pci_odr;
+ char res3[4];
+ uint pci_idr;
+ char res4[20];
+ uint pci_imisr;
+ uint pci_imimr;
+ char res5[24];
+ uint pci_ifhpr;
+ char res5_2[4];
+ uint pci_iftpr;
+ char res6[4];
+ uint pci_iphpr;
+ char res6_2[4];
+ uint pci_iptpr;
+ char res7[4];
+ uint pci_ofhpr;
+ char res7_2[4];
+ uint pci_oftpr;
+ char res8[4];
+ uint pci_ophpr;
+ char res8_2[4];
+ uint pci_optpr;
+ char res9[8];
+ uint pci_mucr;
+ char res10[8];
+ uint pci_qbar;
+ char res11[12];
+ uint pci_dmamr0;
+ uint pci_dmasr0;
+ uint pci_dmacdar0;
+ char res12[4];
+ uint pci_dmasar0;
+ char res13[4];
+ uint pci_dmadar0;
+ char res14[4];
+ uint pci_dmabcr0;
+ uint pci_dmandar0;
+ char res15[88];
+ uint pci_dmamr1;
+ uint pci_dmasr1;
+ uint pci_dmacdar1;
+ char res16[4];
+ uint pci_dmasar1;
+ char res17[4];
+ uint pci_dmadar1;
+ char res18[4];
+ uint pci_dmabcr1;
+ uint pci_dmandar1;
+ char res19[88];
+ uint pci_dmamr2;
+ uint pci_dmasr2;
+ uint pci_dmacdar2;
+ char res20[4];
+ uint pci_dmasar2;
+ char res21[4];
+ uint pci_dmadar2;
+ char res22[4];
+ uint pci_dmabcr2;
+ uint pci_dmandar2;
+ char res23[88];
+ uint pci_dmamr3;
+ uint pci_dmasr3;
+ uint pci_dmacdar3;
+ char res24[4];
+ uint pci_dmasar3;
+ char res25[4];
+ uint pci_dmadar3;
+ char res26[4];
+ uint pci_dmabcr3;
+ uint pci_dmandar3;
+ char res27[344];
+ uint pci_potar0;
+ char res28[4];
+ uint pci_pobar0;
+ char res29[4];
+ uint pci_pocmr0;
+ char res30[4];
+ uint pci_potar1;
+ char res31[4];
+ uint pci_pobar1;
+ char res32[4];
+ uint pci_pocmr1;
+ char res33[4];
+ uint pci_potar2;
+ char res34[4];
+ uint pci_pobar2;
+ char res35[4];
+ uint pci_pocmr2;
+ char res36[52];
+ uint pci_ptcr;
+ uint pci_gpcr;
+ uint pci_gcr;
+ uint pci_esr;
+ uint pci_emr;
+ uint pci_ecr;
+ uint pci_eacr;
+ char res37[4];
+ uint pci_edcr;
+ char res38[4];
+ uint pci_eccr;
+ char res39[44];
+ uint pci_pitar1;
+ char res40[4];
+ uint pci_pibar1;
+ char res41[4];
+ uint pci_picmr1;
+ char res42[4];
+ uint pci_pitar0;
+ char res43[4];
+ uint pci_pibar0;
+ char res44[4];
+ uint pci_picmr0;
+ char res45[4];
+ uint pci_cfg_addr;
+ uint pci_cfg_data;
+ uint pci_int_ack;
+ char res46[756];
+}pci8260_t;
+#define PISCR_PIRQ_MASK ((ushort)0xff00)
+#define PISCR_PS ((ushort)0x0080)
+#define PISCR_PIE ((ushort)0x0004)
+#define PISCR_PTF ((ushort)0x0002)
+#define PISCR_PTE ((ushort)0x0001)
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+ ushort ic_sicr;
+ char res1[2];
+ uint ic_sivec;
+ uint ic_sipnrh;
+ uint ic_sipnrl;
+ uint ic_siprr;
+ uint ic_scprrh;
+ uint ic_scprrl;
+ uint ic_simrh;
+ uint ic_simrl;
+ uint ic_siexr;
+ char res2[88];
+} intctl8260_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+ uint car_sccr;
+ char res1[4];
+ uint car_scmr;
+ char res2[4];
+ uint car_rsr;
+ uint car_rmr;
+ char res[104];
+} car8260_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+ uint iop_pdira;
+ uint iop_ppara;
+ uint iop_psora;
+ uint iop_podra;
+ uint iop_pdata;
+ char res1[12];
+ uint iop_pdirb;
+ uint iop_pparb;
+ uint iop_psorb;
+ uint iop_podrb;
+ uint iop_pdatb;
+ char res2[12];
+ uint iop_pdirc;
+ uint iop_pparc;
+ uint iop_psorc;
+ uint iop_podrc;
+ uint iop_pdatc;
+ char res3[12];
+ uint iop_pdird;
+ uint iop_ppard;
+ uint iop_psord;
+ uint iop_podrd;
+ uint iop_pdatd;
+ char res4[12];
+} iop8260_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+ u_char cpmt_tgcr1;
+ char res1[3];
+ u_char cpmt_tgcr2;
+ char res2[11];
+ ushort cpmt_tmr1;
+ ushort cpmt_tmr2;
+ ushort cpmt_trr1;
+ ushort cpmt_trr2;
+ ushort cpmt_tcr1;
+ ushort cpmt_tcr2;
+ ushort cpmt_tcn1;
+ ushort cpmt_tcn2;
+ ushort cpmt_tmr3;
+ ushort cpmt_tmr4;
+ ushort cpmt_trr3;
+ ushort cpmt_trr4;
+ ushort cpmt_tcr3;
+ ushort cpmt_tcr4;
+ ushort cpmt_tcn3;
+ ushort cpmt_tcn4;
+ ushort cpmt_ter1;
+ ushort cpmt_ter2;
+ ushort cpmt_ter3;
+ ushort cpmt_ter4;
+ char res3[584];
+} cpmtimer8260_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+ char res0[24];
+ u_char sdma_sdsr;
+ char res1[3];
+ u_char sdma_sdmr;
+ char res2[3];
+ u_char sdma_idsr1;
+ char res3[3];
+ u_char sdma_idmr1;
+ char res4[3];
+ u_char sdma_idsr2;
+ char res5[3];
+ u_char sdma_idmr2;
+ char res6[3];
+ u_char sdma_idsr3;
+ char res7[3];
+ u_char sdma_idmr3;
+ char res8[3];
+ u_char sdma_idsr4;
+ char res9[3];
+ u_char sdma_idmr4;
+ char res10[707];
+} sdma8260_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+ uint fcc_gfmr;
+ uint fcc_fpsmr;
+ ushort fcc_ftodr;
+ char res1[2];
+ ushort fcc_fdsr;
+ char res2[2];
+ ushort fcc_fcce;
+ char res3[2];
+ ushort fcc_fccm;
+ char res4[2];
+ u_char fcc_fccs;
+ char res5[3];
+ u_char fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+ uint fcc_firper;
+ uint fcc_firer;
+ uint fcc_firsr_hi;
+ uint fcc_firsr_lo;
+ u_char fcc_gfemr;
+ char res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+ ushort tc_tcmode;
+ ushort tc_cdsmr;
+ ushort tc_tcer;
+ ushort tc_rcc;
+ ushort tc_tcmr;
+ ushort tc_fcc;
+ ushort tc_ccc;
+ ushort tc_icc;
+ ushort tc_tcc;
+ ushort tc_ecc;
+ char res1[12];
+} tclayer_t;
+
+/* I2C
+*/
+typedef struct i2c {
+ u_char i2c_i2mod;
+ char res1[3];
+ u_char i2c_i2add;
+ char res2[3];
+ u_char i2c_i2brg;
+ char res3[3];
+ u_char i2c_i2com;
+ char res4[3];
+ u_char i2c_i2cer;
+ char res5[3];
+ u_char i2c_i2cmr;
+ char res6[331];
+} i2c8260_t;
+
+typedef struct scc { /* Serial communication channels */
+ uint scc_gsmrl;
+ uint scc_gsmrh;
+ ushort scc_psmr;
+ char res1[2];
+ ushort scc_todr;
+ ushort scc_dsr;
+ ushort scc_scce;
+ char res2[2];
+ ushort scc_sccm;
+ char res3;
+ u_char scc_sccs;
+ char res4[8];
+} scc_t;
+
+typedef struct smc { /* Serial management channels */
+ char res1[2];
+ ushort smc_smcmr;
+ char res2[2];
+ u_char smc_smce;
+ char res3[3];
+ u_char smc_smcm;
+ char res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct im_spi {
+ ushort spi_spmode;
+ char res1[4];
+ u_char spi_spie;
+ char res2[3];
+ u_char spi_spim;
+ char res3[2];
+ u_char spi_spcom;
+ char res4[82];
+} im_spi_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+ u_char cmx_si1cr;
+ char res1;
+ u_char cmx_si2cr;
+ char res2;
+ uint cmx_fcr;
+ uint cmx_scr;
+ u_char cmx_smr;
+ char res3;
+ ushort cmx_uar;
+ char res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+ ushort si_amr;
+ ushort si_bmr;
+ ushort si_cmr;
+ ushort si_dmr;
+ u_char si_gmr;
+ char res1;
+ u_char si_cmdr;
+ char res2;
+ u_char si_str;
+ char res3;
+ ushort si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+ ushort mcc_mcce;
+ char res1[2];
+ ushort mcc_mccm;
+ char res2[2];
+ u_char mcc_mccf;
+ char res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+ uint cp_cpcr;
+ uint cp_rccr;
+ char res1[14];
+ ushort cp_rter;
+ char res2[2];
+ ushort cp_rtmr;
+ ushort cp_rtscr;
+ char res3[2];
+ uint cp_rtsr;
+ char res4[12];
+} cpm8260_t;
+
+/* ...and the whole thing wrapped up....
+*/
+typedef struct immap {
+ /* Some references are into the unique and known dpram spaces,
+ * others are from the generic base.
+ */
+#define im_dprambase im_dpram1
+ u_char im_dpram1[16*1024];
+ char res1[16*1024];
+ u_char im_dpram2[4*1024];
+ char res2[8*1024];
+ u_char im_dpram3[4*1024];
+ char res3[16*1024];
+
+ sysconf8260_t im_siu_conf; /* SIU Configuration */
+ memctl8260_t im_memctl; /* Memory Controller */
+ sit8260_t im_sit; /* System Integration Timers */
+ pci8260_t im_pci; /* PCI Configuration */
+ intctl8260_t im_intctl; /* Interrupt Controller */
+ car8260_t im_clkrst; /* Clocks and reset */
+ iop8260_t im_ioport; /* IO Port control/status */
+ cpmtimer8260_t im_cpmtimer; /* CPM timers */
+ sdma8260_t im_sdma; /* SDMA control/status */
+
+ fcc_t im_fcc[3]; /* Three FCCs */
+
+ char res4[32];
+ fcc_c_t im_fcc_c[3]; /* Continued FCCs */
+ char res4a[32];
+
+ tclayer_t im_tclayer[8]; /* Eight TCLayers */
+ ushort tc_tcgsr;
+ ushort tc_tcger;
+
+ /* First set of baud rate generators.
+ */
+ char res4b[236];
+ uint im_brgc5;
+ uint im_brgc6;
+ uint im_brgc7;
+ uint im_brgc8;
+
+ char res5[608];
+
+ i2c8260_t im_i2c; /* I2C control/status */
+ cpm8260_t im_cpm; /* Communication processor */
+
+ /* Second set of baud rate generators.
+ */
+ uint im_brgc1;
+ uint im_brgc2;
+ uint im_brgc3;
+ uint im_brgc4;
+
+ scc_t im_scc[4]; /* Four SCCs */
+ smc_t im_smc[2]; /* Couple of SMCs */
+ im_spi_t im_spi; /* A SPI */
+ cpmux_t im_cpmux; /* CPM clock route mux */
+ siramctl_t im_siramctl1; /* First SI RAM Control */
+ mcc_t im_mcc1; /* First MCC */
+ siramctl_t im_siramctl2; /* Second SI RAM Control */
+ mcc_t im_mcc2; /* Second MCC */
+
+ char res6[1184];
+
+ ushort im_si1txram[256];
+ char res7[512];
+ ushort im_si1rxram[256];
+ char res8[512];
+ ushort im_si2txram[256];
+ char res9[512];
+ ushort im_si2rxram[256];
+ char res10[512];
+ char res11[4096];
+} immap_t;
+
+#endif /* __IMMAP_82XX__ */
--- /dev/null
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ *
+ * MPC83xx Internal Memory Map
+ *
+ * Contributors:
+ * Dave Liu <daveliu@freescale.com>
+ * Tanya Jiang <tanya.jiang@freescale.com>
+ * Mandy Lavi <mandy.lavi@freescale.com>
+ * Eran Liberty <liberty@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#ifndef __IMMAP_83xx__
+#define __IMMAP_83xx__
+
+#include <asm/types.h>
+#include <asm/fsl_i2c.h>
+#include <asm/mpc8xxx_spi.h>
+#include <asm/fsl_lbc.h>
+#include <asm/fsl_dma.h>
+
+/*
+ * Local Access Window
+ */
+typedef struct law83xx {
+ u32 bar; /* LBIU local access window base address register */
+ u32 ar; /* LBIU local access window attribute register */
+} law83xx_t;
+
+/*
+ * System configuration registers
+ */
+typedef struct sysconf83xx {
+ u32 immrbar; /* Internal memory map base address register */
+ u8 res0[0x04];
+ u32 altcbar; /* Alternate configuration base address register */
+ u8 res1[0x14];
+ law83xx_t lblaw[4]; /* LBIU local access window */
+ u8 res2[0x20];
+ law83xx_t pcilaw[2]; /* PCI local access window */
+ u8 res3[0x10];
+ law83xx_t pcielaw[2]; /* PCI Express local access window */
+ u8 res4[0x10];
+ law83xx_t ddrlaw[2]; /* DDR local access window */
+ u8 res5[0x50];
+ u32 sgprl; /* System General Purpose Register Low */
+ u32 sgprh; /* System General Purpose Register High */
+ u32 spridr; /* System Part and Revision ID Register */
+ u8 res6[0x04];
+ u32 spcr; /* System Priority Configuration Register */
+ u32 sicrl; /* System I/O Configuration Register Low */
+ u32 sicrh; /* System I/O Configuration Register High */
+ u8 res7[0x04];
+ u32 sidcr0; /* System I/O Delay Configuration Register 0 */
+ u32 sidcr1; /* System I/O Delay Configuration Register 1 */
+ u32 ddrcdr; /* DDR Control Driver Register */
+ u32 ddrdsr; /* DDR Debug Status Register */
+ u32 obir; /* Output Buffer Impedance Register */
+ u8 res8[0xC];
+ u32 pecr1; /* PCI Express control register 1 */
+ u32 pecr2; /* PCI Express control register 2 */
+ u8 res9[0xB8];
+} sysconf83xx_t;
+
+/*
+ * Watch Dog Timer (WDT) Registers
+ */
+typedef struct wdt83xx {
+ u8 res0[4];
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
+ u8 res1[2];
+ u16 swsrr; /* System watchdog service register */
+ u8 res2[0xF0];
+} wdt83xx_t;
+
+/*
+ * RTC/PIT Module Registers
+ */
+typedef struct rtclk83xx {
+ u32 cnr; /* control register */
+ u32 ldr; /* load register */
+ u32 psr; /* prescale register */
+ u32 ctr; /* counter value field register */
+ u32 evr; /* event register */
+ u32 alr; /* alarm register */
+ u8 res0[0xE8];
+} rtclk83xx_t;
+
+/*
+ * Global timer module
+ */
+typedef struct gtm83xx {
+ u8 cfr1; /* Timer1/2 Configuration */
+ u8 res0[3];
+ u8 cfr2; /* Timer3/4 Configuration */
+ u8 res1[10];
+ u16 mdr1; /* Timer1 Mode Register */
+ u16 mdr2; /* Timer2 Mode Register */
+ u16 rfr1; /* Timer1 Reference Register */
+ u16 rfr2; /* Timer2 Reference Register */
+ u16 cpr1; /* Timer1 Capture Register */
+ u16 cpr2; /* Timer2 Capture Register */
+ u16 cnr1; /* Timer1 Counter Register */
+ u16 cnr2; /* Timer2 Counter Register */
+ u16 mdr3; /* Timer3 Mode Register */
+ u16 mdr4; /* Timer4 Mode Register */
+ u16 rfr3; /* Timer3 Reference Register */
+ u16 rfr4; /* Timer4 Reference Register */
+ u16 cpr3; /* Timer3 Capture Register */
+ u16 cpr4; /* Timer4 Capture Register */
+ u16 cnr3; /* Timer3 Counter Register */
+ u16 cnr4; /* Timer4 Counter Register */
+ u16 evr1; /* Timer1 Event Register */
+ u16 evr2; /* Timer2 Event Register */
+ u16 evr3; /* Timer3 Event Register */
+ u16 evr4; /* Timer4 Event Register */
+ u16 psr1; /* Timer1 Prescaler Register */
+ u16 psr2; /* Timer2 Prescaler Register */
+ u16 psr3; /* Timer3 Prescaler Register */
+ u16 psr4; /* Timer4 Prescaler Register */
+ u8 res[0xC0];
+} gtm83xx_t;
+
+/*
+ * Integrated Programmable Interrupt Controller
+ */
+typedef struct ipic83xx {
+ u32 sicfr; /* System Global Interrupt Configuration Register */
+ u32 sivcr; /* System Global Interrupt Vector Register */
+ u32 sipnr_h; /* System Internal Interrupt Pending Register - High */
+ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low */
+ u32 siprr_a; /* System Internal Interrupt Group A Priority Register */
+ u8 res0[8];
+ u32 siprr_d; /* System Internal Interrupt Group D Priority Register */
+ u32 simsr_h; /* System Internal Interrupt Mask Register - High */
+ u32 simsr_l; /* System Internal Interrupt Mask Register - Low */
+ u8 res1[4];
+ u32 sepnr; /* System External Interrupt Pending Register */
+ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register */
+ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register */
+ u32 semsr; /* System External Interrupt Mask Register */
+ u32 secnr; /* System External Interrupt Control Register */
+ u32 sersr; /* System Error Status Register */
+ u32 sermr; /* System Error Mask Register */
+ u32 sercr; /* System Error Control Register */
+ u8 res2[4];
+ u32 sifcr_h; /* System Internal Interrupt Force Register - High */
+ u32 sifcr_l; /* System Internal Interrupt Force Register - Low */
+ u32 sefcr; /* System External Interrupt Force Register */
+ u32 serfr; /* System Error Force Register */
+ u32 scvcr; /* System Critical Interrupt Vector Register */
+ u32 smvcr; /* System Management Interrupt Vector Register */
+ u8 res3[0x98];
+} ipic83xx_t;
+
+/*
+ * System Arbiter Registers
+ */
+typedef struct arbiter83xx {
+ u32 acr; /* Arbiter Configuration Register */
+ u32 atr; /* Arbiter Timers Register */
+ u8 res[4];
+ u32 aer; /* Arbiter Event Register */
+ u32 aidr; /* Arbiter Interrupt Definition Register */
+ u32 amr; /* Arbiter Mask Register */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register */
+ u8 res1[0xDC];
+} arbiter83xx_t;
+
+/*
+ * Reset Module
+ */
+typedef struct reset83xx {
+ u32 rcwl; /* Reset Configuration Word Low Register */
+ u32 rcwh; /* Reset Configuration Word High Register */
+ u8 res0[8];
+ u32 rsr; /* Reset Status Register */
+ u32 rmr; /* Reset Mode Register */
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+ u32 rcer; /* Reset Control Enable Register */
+ u8 res1[0xDC];
+} reset83xx_t;
+
+/*
+ * Clock Module
+ */
+typedef struct clk83xx {
+ u32 spmr; /* system PLL mode Register */
+ u32 occr; /* output clock control Register */
+ u32 sccr; /* system clock control Register */
+ u8 res0[0xF4];
+} clk83xx_t;
+
+/*
+ * Power Management Control Module
+ */
+typedef struct pmc83xx {
+ u32 pmccr; /* PMC Configuration Register */
+ u32 pmcer; /* PMC Event Register */
+ u32 pmcmr; /* PMC Mask Register */
+ u32 pmccr1; /* PMC Configuration Register 1 */
+ u32 pmccr2; /* PMC Configuration Register 2 */
+ u8 res0[0xEC];
+} pmc83xx_t;
+
+/*
+ * General purpose I/O module
+ */
+typedef struct gpio83xx {
+ u32 dir; /* direction register */
+ u32 odr; /* open drain register */
+ u32 dat; /* data register */
+ u32 ier; /* interrupt event register */
+ u32 imr; /* interrupt mask register */
+ u32 icr; /* external interrupt control register */
+ u8 res0[0xE8];
+} gpio83xx_t;
+
+/*
+ * QE Ports Interrupts Registers
+ */
+typedef struct qepi83xx {
+ u8 res0[0xC];
+ u32 qepier; /* QE Ports Interrupt Event Register */
+ u32 qepimr; /* QE Ports Interrupt Mask Register */
+ u32 qepicr; /* QE Ports Interrupt Control Register */
+ u8 res1[0xE8];
+} qepi83xx_t;
+
+/*
+ * QE Parallel I/O Ports
+ */
+typedef struct gpio_n {
+ u32 podr; /* Open Drain Register */
+ u32 pdat; /* Data Register */
+ u32 dir1; /* direction register 1 */
+ u32 dir2; /* direction register 2 */
+ u32 ppar1; /* Pin Assignment Register 1 */
+ u32 ppar2; /* Pin Assignment Register 2 */
+} gpio_n_t;
+
+typedef struct qegpio83xx {
+ gpio_n_t ioport[0x7];
+ u8 res0[0x358];
+} qepio83xx_t;
+
+/*
+ * QE Secondary Bus Access Windows
+ */
+typedef struct qesba83xx {
+ u32 lbmcsar; /* Local bus memory controller start address */
+ u32 sdmcsar; /* Secondary DDR memory controller start address */
+ u8 res0[0x38];
+ u32 lbmcear; /* Local bus memory controller end address */
+ u32 sdmcear; /* Secondary DDR memory controller end address */
+ u8 res1[0x38];
+ u32 lbmcar; /* Local bus memory controller attributes */
+ u32 sdmcar; /* Secondary DDR memory controller attributes */
+ u8 res2[0x378];
+} qesba83xx_t;
+
+/*
+ * DDR Memory Controller Memory Map
+ */
+typedef struct ddr_cs_bnds {
+ u32 csbnds;
+ u8 res0[4];
+} ddr_cs_bnds_t;
+
+typedef struct ddr83xx {
+ ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
+ u8 res0[0x60];
+ u32 cs_config[4]; /* Chip Select x Configuration */
+ u8 res1[0x70];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 ddr_data_init; /* SDRAM Data Initialization */
+ u8 res2[4];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u8 res3[0x14];
+ u32 ddr_init_addr; /* DDR training initialization address */
+ u32 ddr_init_ext_addr; /* DDR training initialization extended address */
+ u8 res4[0xAA8];
+ u32 ddr_ip_rev1; /* DDR IP block revision 1 */
+ u32 ddr_ip_rev2; /* DDR IP block revision 2 */
+ u8 res5[0x200];
+ u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */
+ u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */
+ u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */
+ u8 res6[0x14];
+ u32 capture_data_hi; /* Memory Data Path Read Capture High */
+ u32 capture_data_lo; /* Memory Data Path Read Capture Low */
+ u32 capture_ecc; /* Memory Data Path Read Capture ECC */
+ u8 res7[0x14];
+ u32 err_detect; /* Memory Error Detect */
+ u32 err_disable; /* Memory Error Disable */
+ u32 err_int_en; /* Memory Error Interrupt Enable */
+ u32 capture_attributes; /* Memory Error Attributes Capture */
+ u32 capture_address; /* Memory Error Address Capture */
+ u32 capture_ext_address;/* Memory Error Extended Address Capture */
+ u32 err_sbe; /* Memory Single-Bit ECC Error Management */
+ u8 res8[0xA4];
+ u32 debug_reg;
+ u8 res9[0xFC];
+} ddr83xx_t;
+
+/*
+ * DUART
+ */
+typedef struct duart83xx {
+ u8 urbr_ulcr_udlb; /* combined register for URBR, UTHR and UDLB */
+ u8 uier_udmb; /* combined register for UIER and UDMB */
+ u8 uiir_ufcr_uafr; /* combined register for UIIR, UFCR and UAFR */
+ u8 ulcr; /* line control register */
+ u8 umcr; /* MODEM control register */
+ u8 ulsr; /* line status register */
+ u8 umsr; /* MODEM status register */
+ u8 uscr; /* scratch register */
+ u8 res0[8];
+ u8 udsr; /* DMA status register */
+ u8 res1[3];
+ u8 res2[0xEC];
+} duart83xx_t;
+
+/*
+ * DMA/Messaging Unit
+ */
+typedef struct dma83xx {
+ u32 res0[0xC]; /* 0x0-0x29 reseverd */
+ u32 omisr; /* 0x30 Outbound message interrupt status register */
+ u32 omimr; /* 0x34 Outbound message interrupt mask register */
+ u32 res1[0x6]; /* 0x38-0x49 reserved */
+ u32 imr0; /* 0x50 Inbound message register 0 */
+ u32 imr1; /* 0x54 Inbound message register 1 */
+ u32 omr0; /* 0x58 Outbound message register 0 */
+ u32 omr1; /* 0x5C Outbound message register 1 */
+ u32 odr; /* 0x60 Outbound doorbell register */
+ u32 res2; /* 0x64-0x67 reserved */
+ u32 idr; /* 0x68 Inbound doorbell register */
+ u32 res3[0x5]; /* 0x6C-0x79 reserved */
+ u32 imisr; /* 0x80 Inbound message interrupt status register */
+ u32 imimr; /* 0x84 Inbound message interrupt mask register */
+ u32 res4[0x1E]; /* 0x88-0x99 reserved */
+ struct fsl_dma dma[4];
+} dma83xx_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct pciconf83xx {
+ u32 config_address;
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
+} pciconf83xx_t;
+
+/*
+ * PCI Outbound Translation Register
+ */
+typedef struct pci_outbound_window {
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot83xx_t;
+
+/*
+ * Sequencer
+ */
+typedef struct ios83xx {
+ pot83xx_t pot[6];
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
+} ios83xx_t;
+
+/*
+ * PCI Controller Control and Status Registers
+ */
+typedef struct pcictrl83xx {
+ u32 esr;
+ u32 ecdr;
+ u32 eer;
+ u32 eatcr;
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
+} pcictrl83xx_t;
+
+/*
+ * USB
+ */
+typedef struct usb83xx {
+ u8 fixme[0x1000];
+} usb83xx_t;
+
+/*
+ * TSEC
+ */
+typedef struct tsec83xx {
+ u8 fixme[0x1000];
+} tsec83xx_t;
+
+/*
+ * Security
+ */
+typedef struct security83xx {
+ u8 fixme[0x10000];
+} security83xx_t;
+
+/*
+ * PCI Express
+ */
+struct pex_inbound_window {
+ u32 ar;
+ u32 tar;
+ u32 barl;
+ u32 barh;
+};
+
+struct pex_outbound_window {
+ u32 ar;
+ u32 bar;
+ u32 tarl;
+ u32 tarh;
+};
+
+struct pex_csb_bridge {
+ u32 pex_csb_ver;
+ u32 pex_csb_cab;
+ u32 pex_csb_ctrl;
+ u8 res0[8];
+ u32 pex_dms_dstmr;
+ u8 res1[4];
+ u32 pex_cbs_stat;
+ u8 res2[0x20];
+ u32 pex_csb_obctrl;
+ u32 pex_csb_obstat;
+ u8 res3[0x98];
+ u32 pex_csb_ibctrl;
+ u32 pex_csb_ibstat;
+ u8 res4[0xb8];
+ u32 pex_wdma_ctrl;
+ u32 pex_wdma_addr;
+ u32 pex_wdma_stat;
+ u8 res5[0x94];
+ u32 pex_rdma_ctrl;
+ u32 pex_rdma_addr;
+ u32 pex_rdma_stat;
+ u8 res6[0xd4];
+ u32 pex_ombcr;
+ u32 pex_ombdr;
+ u8 res7[0x38];
+ u32 pex_imbcr;
+ u32 pex_imbdr;
+ u8 res8[0x38];
+ u32 pex_int_enb;
+ u32 pex_int_stat;
+ u32 pex_int_apio_vec1;
+ u32 pex_int_apio_vec2;
+ u8 res9[0x10];
+ u32 pex_int_ppio_vec1;
+ u32 pex_int_ppio_vec2;
+ u32 pex_int_wdma_vec1;
+ u32 pex_int_wdma_vec2;
+ u32 pex_int_rdma_vec1;
+ u32 pex_int_rdma_vec2;
+ u32 pex_int_misc_vec;
+ u8 res10[4];
+ u32 pex_int_axi_pio_enb;
+ u32 pex_int_axi_wdma_enb;
+ u32 pex_int_axi_rdma_enb;
+ u32 pex_int_axi_misc_enb;
+ u32 pex_int_axi_pio_stat;
+ u32 pex_int_axi_wdma_stat;
+ u32 pex_int_axi_rdma_stat;
+ u32 pex_int_axi_misc_stat;
+ u8 res11[0xa0];
+ struct pex_outbound_window pex_outbound_win[4];
+ u8 res12[0x100];
+ u32 pex_epiwtar0;
+ u32 pex_epiwtar1;
+ u32 pex_epiwtar2;
+ u32 pex_epiwtar3;
+ u8 res13[0x70];
+ struct pex_inbound_window pex_inbound_win[4];
+};
+
+typedef struct pex83xx {
+ u8 pex_cfg_header[0x404];
+ u32 pex_ltssm_stat;
+ u8 res0[0x30];
+ u32 pex_ack_replay_timeout;
+ u8 res1[4];
+ u32 pex_gclk_ratio;
+ u8 res2[0xc];
+ u32 pex_pm_timer;
+ u32 pex_pme_timeout;
+ u8 res3[4];
+ u32 pex_aspm_req_timer;
+ u8 res4[0x18];
+ u32 pex_ssvid_update;
+ u8 res5[0x34];
+ u32 pex_cfg_ready;
+ u8 res6[0x24];
+ u32 pex_bar_sizel;
+ u8 res7[4];
+ u32 pex_bar_sel;
+ u8 res8[0x20];
+ u32 pex_bar_pf;
+ u8 res9[0x88];
+ u32 pex_pme_to_ack_tor;
+ u8 res10[0xc];
+ u32 pex_ss_intr_mask;
+ u8 res11[0x25c];
+ struct pex_csb_bridge bridge;
+ u8 res12[0x160];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+ u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+ u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+ u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+ u8 mem[0x10000];
+} rom83xx_t;
+
+/*
+ * TDM
+ */
+typedef struct tdm83xx {
+ u8 fixme[0x200];
+} tdm83xx_t;
+
+/*
+ * TDM DMAC
+ */
+typedef struct tdmdmac83xx {
+ u8 fixme[0x2000];
+} tdmdmac83xx_t;
+
+#if defined(CONFIG_MPC834x)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x200];
+ u8 dll_ddr[0x100];
+ u8 dll_lbc[0x100];
+ u8 res1[0xE00];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res2[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res3[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res4[0x1000];
+ spi8xxx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
+ u8 res5[0x19900];
+ usb83xx_t usb[2];
+ tsec83xx_t tsec[2];
+ u8 res6[0xA000];
+ security83xx_t security;
+ u8 res7[0xC0000];
+} immap_t;
+
+#ifdef CONFIG_HAS_FSL_MPH_USB
+#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x22000 /* use the MPH controller */
+#else
+#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 /* use the DR controller */
+#endif
+
+#elif defined(CONFIG_MPC8313)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi8xxx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0x1aa00];
+ usb83xx_t usb[1];
+ tsec83xx_t tsec[2];
+ u8 res6[0xA000];
+ security83xx_t security;
+ u8 res7[0xC0000];
+} immap_t;
+
+#elif defined(CONFIG_MPC8315)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi8xxx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xb000];
+ tdm83xx_t tdm; /* TDM Controller */
+ u8 res7[0x1e00];
+ sata83xx_t sata[2]; /* SATA Controller */
+ u8 res8[0x9000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res9[0x6000];
+ tdmdmac83xx_t tdmdmac; /* TDM DMAC */
+ u8 res10[0x2000];
+ security83xx_t security;
+ u8 res11[0xA3000];
+ serdes83xx_t serdes[1]; /* SerDes Registers */
+ u8 res12[0x1CF00];
+} immap_t;
+
+#elif defined(CONFIG_MPC837x)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x1200];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi8xxx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xd000];
+ sata83xx_t sata[4]; /* SATA Controller */
+ u8 res7[0x7000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res8[0x8000];
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res9[0x1000];
+ security83xx_t security;
+ u8 res10[0xA3000];
+ serdes83xx_t serdes[2]; /* SerDes Registers */
+ u8 res11[0xCE00];
+ rom83xx_t rom; /* On Chip ROM */
+} immap_t;
+
+#elif defined(CONFIG_MPC8360)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ u8 res0[0x200];
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
+ u8 res1[0x300];
+ u8 dll_ddr[0x100];
+ u8 dll_lbc[0x100];
+ u8 res2[0x200];
+ qepio83xx_t qepio; /* QE Parallel I/O ports */
+ qesba83xx_t qesba; /* QE Secondary Bus Access Windows */
+ u8 res3[0x400];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res4[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res5[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res6[0x2000];
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res7[128];
+ ios83xx_t ios; /* Sequencer (IOS) */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res8[0x4A00];
+ ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */
+ u8 res9[0x22000];
+ security83xx_t security;
+ u8 res10[0xC0000];
+ u8 qe[0x100000]; /* QE block */
+} immap_t;
+
+#elif defined(CONFIG_MPC832x)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
+ u8 res0[0x300];
+ u8 dll_ddr[0x100];
+ u8 dll_lbc[0x100];
+ u8 res1[0x200];
+ qepio83xx_t qepio; /* QE Parallel I/O ports */
+ u8 res2[0x800];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res3[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res4[0x900];
+ fsl_lbus_t lbus; /* Local Bus Controller Registers */
+ u8 res5[0x2000];
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res6[128];
+ ios83xx_t ios; /* Sequencer (IOS) */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res7[0x27A00];
+ security83xx_t security;
+ u8 res8[0xC0000];
+ u8 qe[0x100000]; /* QE block */
+} immap_t;
+#endif
+
+#define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000)
+#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
+#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
+
+#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
+#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
+#endif
+#define CONFIG_SYS_MPC83xx_USB_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+#endif /* __IMMAP_83xx__ */
--- /dev/null
+/*
+ * MPC85xx Internal Memory Map
+ *
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * Copyright(c) 2002,2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_85xx__
+#define __IMMAP_85xx__
+
+#include <asm/types.h>
+#include <asm/fsl_dma.h>
+#include <asm/fsl_i2c.h>
+#include <asm/fsl_lbc.h>
+
+typedef struct ccsr_local {
+ u32 ccsrbarh; /* CCSR Base Addr High */
+ u32 ccsrbarl; /* CCSR Base Addr Low */
+ u32 ccsrar; /* CCSR Attr */
+#define CCSRAR_C 0x80000000 /* Commit */
+ u8 res1[4];
+ u32 altcbarh; /* Alternate Configuration Base Addr High */
+ u32 altcbarl; /* Alternate Configuration Base Addr Low */
+ u32 altcar; /* Alternate Configuration Attr */
+ u8 res2[4];
+ u32 bstrh; /* Boot space translation high */
+ u32 bstrl; /* Boot space translation Low */
+ u32 bstrar; /* Boot space translation attributes */
+ u8 res3[0xbd4];
+ struct {
+ u32 lawbarh; /* LAWn base addr high */
+ u32 lawbarl; /* LAWn base addr low */
+ u32 lawar; /* LAWn attributes */
+ u8 res4[4];
+ } law[32];
+ u8 res35[0x204];
+} ccsr_local_t;
+
+/* Local-Access Registers & ECM Registers */
+typedef struct ccsr_local_ecm {
+ u32 ccsrbar; /* CCSR Base Addr */
+ u8 res1[4];
+ u32 altcbar; /* Alternate Configuration Base Addr */
+ u8 res2[4];
+ u32 altcar; /* Alternate Configuration Attr */
+ u8 res3[12];
+ u32 bptr; /* Boot Page Translation */
+ u8 res4[3044];
+ u32 lawbar0; /* Local Access Window 0 Base Addr */
+ u8 res5[4];
+ u32 lawar0; /* Local Access Window 0 Attrs */
+ u8 res6[20];
+ u32 lawbar1; /* Local Access Window 1 Base Addr */
+ u8 res7[4];
+ u32 lawar1; /* Local Access Window 1 Attrs */
+ u8 res8[20];
+ u32 lawbar2; /* Local Access Window 2 Base Addr */
+ u8 res9[4];
+ u32 lawar2; /* Local Access Window 2 Attrs */
+ u8 res10[20];
+ u32 lawbar3; /* Local Access Window 3 Base Addr */
+ u8 res11[4];
+ u32 lawar3; /* Local Access Window 3 Attrs */
+ u8 res12[20];
+ u32 lawbar4; /* Local Access Window 4 Base Addr */
+ u8 res13[4];
+ u32 lawar4; /* Local Access Window 4 Attrs */
+ u8 res14[20];
+ u32 lawbar5; /* Local Access Window 5 Base Addr */
+ u8 res15[4];
+ u32 lawar5; /* Local Access Window 5 Attrs */
+ u8 res16[20];
+ u32 lawbar6; /* Local Access Window 6 Base Addr */
+ u8 res17[4];
+ u32 lawar6; /* Local Access Window 6 Attrs */
+ u8 res18[20];
+ u32 lawbar7; /* Local Access Window 7 Base Addr */
+ u8 res19[4];
+ u32 lawar7; /* Local Access Window 7 Attrs */
+ u8 res19_8a[20];
+ u32 lawbar8; /* Local Access Window 8 Base Addr */
+ u8 res19_8b[4];
+ u32 lawar8; /* Local Access Window 8 Attrs */
+ u8 res19_9a[20];
+ u32 lawbar9; /* Local Access Window 9 Base Addr */
+ u8 res19_9b[4];
+ u32 lawar9; /* Local Access Window 9 Attrs */
+ u8 res19_10a[20];
+ u32 lawbar10; /* Local Access Window 10 Base Addr */
+ u8 res19_10b[4];
+ u32 lawar10; /* Local Access Window 10 Attrs */
+ u8 res19_11a[20];
+ u32 lawbar11; /* Local Access Window 11 Base Addr */
+ u8 res19_11b[4];
+ u32 lawar11; /* Local Access Window 11 Attrs */
+ u8 res20[652];
+ u32 eebacr; /* ECM CCB Addr Configuration */
+ u8 res21[12];
+ u32 eebpcr; /* ECM CCB Port Configuration */
+ u8 res22[3564];
+ u32 eedr; /* ECM Error Detect */
+ u8 res23[4];
+ u32 eeer; /* ECM Error Enable */
+ u32 eeatr; /* ECM Error Attrs Capture */
+ u32 eeadr; /* ECM Error Addr Capture */
+ u8 res24[492];
+} ccsr_local_ecm_t;
+
+/* DDR memory controller registers */
+typedef struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u8 res1[4];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u8 res2[4];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u8 res3[4];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u8 res4[100];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u8 res4a[48];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u8 res5[48];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u8 res6[4];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u8 res7[20];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u8 res8_1[16];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u8 reg8_1a[8];
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u8 reg8_1aa[4];
+ u32 ddr_sr_cntr; /* self refresh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u8 res8_1b[2456];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u8 res8_1c[200];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u8 res8_2[512];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u8 res9[20];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u8 res10[20];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u8 res11[164];
+ u32 debug_1;
+ u32 debug_2;
+ u32 debug_3;
+ u32 debug_4;
+ u32 debug_5;
+ u32 debug_6;
+ u32 debug_7;
+ u32 debug_8;
+ u32 debug_9;
+ u32 debug_10;
+ u32 debug_11;
+ u32 debug_12;
+ u32 debug_13;
+ u32 debug_14;
+ u32 debug_15;
+ u32 debug_16;
+ u32 debug_17;
+ u32 debug_18;
+ u8 res12[184];
+} ccsr_ddr_t;
+
+/* I2C Registers */
+typedef struct ccsr_i2c {
+ struct fsl_i2c i2c[1];
+ u8 res[4096 - 1 * sizeof(struct fsl_i2c)];
+} ccsr_i2c_t;
+
+#if defined(CONFIG_MPC8540) \
+ || defined(CONFIG_MPC8541) \
+ || defined(CONFIG_MPC8548) \
+ || defined(CONFIG_MPC8555)
+/* DUART Registers */
+typedef struct ccsr_duart {
+ u8 res1[1280];
+/* URBR1, UTHR1, UDLB1 with the same addr */
+ u8 urbr1_uthr1_udlb1;
+/* UIER1, UDMB1 with the same addr01 */
+ u8 uier1_udmb1;
+/* UIIR1, UFCR1, UAFR1 with the same addr */
+ u8 uiir1_ufcr1_uafr1;
+ u8 ulcr1; /* UART1 Line Control */
+ u8 umcr1; /* UART1 Modem Control */
+ u8 ulsr1; /* UART1 Line Status */
+ u8 umsr1; /* UART1 Modem Status */
+ u8 uscr1; /* UART1 Scratch */
+ u8 res2[8];
+ u8 udsr1; /* UART1 DMA Status */
+ u8 res3[239];
+/* URBR2, UTHR2, UDLB2 with the same addr */
+ u8 urbr2_uthr2_udlb2;
+/* UIER2, UDMB2 with the same addr */
+ u8 uier2_udmb2;
+/* UIIR2, UFCR2, UAFR2 with the same addr */
+ u8 uiir2_ufcr2_uafr2;
+ u8 ulcr2; /* UART2 Line Control */
+ u8 umcr2; /* UART2 Modem Control */
+ u8 ulsr2; /* UART2 Line Status */
+ u8 umsr2; /* UART2 Modem Status */
+ u8 uscr2; /* UART2 Scratch */
+ u8 res4[8];
+ u8 udsr2; /* UART2 DMA Status */
+ u8 res5[2543];
+} ccsr_duart_t;
+#else /* MPC8560 uses UART on its CPM */
+typedef struct ccsr_duart {
+ u8 res[4096];
+} ccsr_duart_t;
+#endif
+
+/* Local Bus Controller Registers */
+typedef struct ccsr_lbc {
+ u32 br0; /* LBC Base 0 */
+ u32 or0; /* LBC Options 0 */
+ u32 br1; /* LBC Base 1 */
+ u32 or1; /* LBC Options 1 */
+ u32 br2; /* LBC Base 2 */
+ u32 or2; /* LBC Options 2 */
+ u32 br3; /* LBC Base 3 */
+ u32 or3; /* LBC Options 3 */
+ u32 br4; /* LBC Base 4 */
+ u32 or4; /* LBC Options 4 */
+ u32 br5; /* LBC Base 5 */
+ u32 or5; /* LBC Options 5 */
+ u32 br6; /* LBC Base 6 */
+ u32 or6; /* LBC Options 6 */
+ u32 br7; /* LBC Base 7 */
+ u32 or7; /* LBC Options 7 */
+ u8 res1[40];
+ u32 mar; /* LBC UPM Addr */
+ u8 res2[4];
+ u32 mamr; /* LBC UPMA Mode */
+ u32 mbmr; /* LBC UPMB Mode */
+ u32 mcmr; /* LBC UPMC Mode */
+ u8 res3[8];
+ u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */
+ u32 mdr; /* LBC UPM Data */
+ u8 res4[8];
+ u32 lsdmr; /* LBC SDRAM Mode */
+ u8 res5[8];
+ u32 lurt; /* LBC UPM Refresh Timer */
+ u32 lsrt; /* LBC SDRAM Refresh Timer */
+ u8 res6[8];
+ u32 ltesr; /* LBC Transfer Error Status */
+ u32 ltedr; /* LBC Transfer Error Disable */
+ u32 lteir; /* LBC Transfer Error IRQ */
+ u32 lteatr; /* LBC Transfer Error Attrs */
+ u32 ltear; /* LBC Transfer Error Addr */
+ u8 res7[12];
+ u32 lbcr; /* LBC Configuration */
+ u32 lcrr; /* LBC Clock Ratio */
+ u8 res8[3880];
+} ccsr_lbc_t;
+
+/* eSPI Registers */
+typedef struct ccsr_espi {
+ u32 mode; /* eSPI mode */
+ u32 event; /* eSPI event */
+ u32 mask; /* eSPI mask */
+ u32 com; /* eSPI command */
+ u32 tx; /* eSPI transmit FIFO access */
+ u32 rx; /* eSPI receive FIFO access */
+ u8 res1[8]; /* reserved */
+ u32 csmode[4]; /* 0x2c: sSPI CS0/1/2/3 mode */
+ u8 res2[4048]; /* fill up to 0x1000 */
+} ccsr_espi_t;
+
+/* PCI Registers */
+typedef struct ccsr_pcix {
+ u32 cfg_addr; /* PCIX Configuration Addr */
+ u32 cfg_data; /* PCIX Configuration Data */
+ u32 int_ack; /* PCIX IRQ Acknowledge */
+ u8 res1[3060];
+ u32 potar0; /* PCIX Outbound Transaction Addr 0 */
+ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
+ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
+ u32 powbear0; /* PCIX Outbound Window Base Extended Addr 0 */
+ u32 powar0; /* PCIX Outbound Window Attrs 0 */
+ u8 res2[12];
+ u32 potar1; /* PCIX Outbound Transaction Addr 1 */
+ u32 potear1; /* PCIX Outbound Translation Extended Addr 1 */
+ u32 powbar1; /* PCIX Outbound Window Base Addr 1 */
+ u32 powbear1; /* PCIX Outbound Window Base Extended Addr 1 */
+ u32 powar1; /* PCIX Outbound Window Attrs 1 */
+ u8 res3[12];
+ u32 potar2; /* PCIX Outbound Transaction Addr 2 */
+ u32 potear2; /* PCIX Outbound Translation Extended Addr 2 */
+ u32 powbar2; /* PCIX Outbound Window Base Addr 2 */
+ u32 powbear2; /* PCIX Outbound Window Base Extended Addr 2 */
+ u32 powar2; /* PCIX Outbound Window Attrs 2 */
+ u8 res4[12];
+ u32 potar3; /* PCIX Outbound Transaction Addr 3 */
+ u32 potear3; /* PCIX Outbound Translation Extended Addr 3 */
+ u32 powbar3; /* PCIX Outbound Window Base Addr 3 */
+ u32 powbear3; /* PCIX Outbound Window Base Extended Addr 3 */
+ u32 powar3; /* PCIX Outbound Window Attrs 3 */
+ u8 res5[12];
+ u32 potar4; /* PCIX Outbound Transaction Addr 4 */
+ u32 potear4; /* PCIX Outbound Translation Extended Addr 4 */
+ u32 powbar4; /* PCIX Outbound Window Base Addr 4 */
+ u32 powbear4; /* PCIX Outbound Window Base Extended Addr 4 */
+ u32 powar4; /* PCIX Outbound Window Attrs 4 */
+ u8 res6[268];
+ u32 pitar3; /* PCIX Inbound Translation Addr 3 */
+ u32 pitear3; /* PCIX Inbound Translation Extended Addr 3 */
+ u32 piwbar3; /* PCIX Inbound Window Base Addr 3 */
+ u32 piwbear3; /* PCIX Inbound Window Base Extended Addr 3 */
+ u32 piwar3; /* PCIX Inbound Window Attrs 3 */
+ u8 res7[12];
+ u32 pitar2; /* PCIX Inbound Translation Addr 2 */
+ u32 pitear2; /* PCIX Inbound Translation Extended Addr 2 */
+ u32 piwbar2; /* PCIX Inbound Window Base Addr 2 */
+ u32 piwbear2; /* PCIX Inbound Window Base Extended Addr 2 */
+ u32 piwar2; /* PCIX Inbound Window Attrs 2 */
+ u8 res8[12];
+ u32 pitar1; /* PCIX Inbound Translation Addr 1 */
+ u32 pitear1; /* PCIX Inbound Translation Extended Addr 1 */
+ u32 piwbar1; /* PCIX Inbound Window Base Addr 1 */
+ u8 res9[4];
+ u32 piwar1; /* PCIX Inbound Window Attrs 1 */
+ u8 res10[12];
+ u32 pedr; /* PCIX Error Detect */
+ u32 pecdr; /* PCIX Error Capture Disable */
+ u32 peer; /* PCIX Error Enable */
+ u32 peattrcr; /* PCIX Error Attrs Capture */
+ u32 peaddrcr; /* PCIX Error Addr Capture */
+ u32 peextaddrcr; /* PCIX Error Extended Addr Capture */
+ u32 pedlcr; /* PCIX Error Data Low Capture */
+ u32 pedhcr; /* PCIX Error Error Data High Capture */
+ u32 gas_timr; /* PCIX Gasket Timer */
+ u8 res11[476];
+} ccsr_pcix_t;
+
+#define PCIX_COMMAND 0x62
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+#define POWAR_MEM_512M 0x0000001c
+#define POWAR_IO_1M 0x00000013
+
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+#define PIWAR_MEM_2G 0x0000001e
+
+typedef struct ccsr_gpio {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr;
+} ccsr_gpio_t;
+
+/* L2 Cache Registers */
+typedef struct ccsr_l2cache {
+ u32 l2ctl; /* L2 configuration 0 */
+ u8 res1[12];
+ u32 l2cewar0; /* L2 cache external write addr 0 */
+ u8 res2[4];
+ u32 l2cewcr0; /* L2 cache external write control 0 */
+ u8 res3[4];
+ u32 l2cewar1; /* L2 cache external write addr 1 */
+ u8 res4[4];
+ u32 l2cewcr1; /* L2 cache external write control 1 */
+ u8 res5[4];
+ u32 l2cewar2; /* L2 cache external write addr 2 */
+ u8 res6[4];
+ u32 l2cewcr2; /* L2 cache external write control 2 */
+ u8 res7[4];
+ u32 l2cewar3; /* L2 cache external write addr 3 */
+ u8 res8[4];
+ u32 l2cewcr3; /* L2 cache external write control 3 */
+ u8 res9[180];
+ u32 l2srbar0; /* L2 memory-mapped SRAM base addr 0 */
+ u8 res10[4];
+ u32 l2srbar1; /* L2 memory-mapped SRAM base addr 1 */
+ u8 res11[3316];
+ u32 l2errinjhi; /* L2 error injection mask high */
+ u32 l2errinjlo; /* L2 error injection mask low */
+ u32 l2errinjctl; /* L2 error injection tag/ECC control */
+ u8 res12[20];
+ u32 l2captdatahi; /* L2 error data high capture */
+ u32 l2captdatalo; /* L2 error data low capture */
+ u32 l2captecc; /* L2 error ECC capture */
+ u8 res13[20];
+ u32 l2errdet; /* L2 error detect */
+ u32 l2errdis; /* L2 error disable */
+ u32 l2errinten; /* L2 error interrupt enable */
+ u32 l2errattr; /* L2 error attributes capture */
+ u32 l2erraddr; /* L2 error addr capture */
+ u8 res14[4];
+ u32 l2errctl; /* L2 error control */
+ u8 res15[420];
+} ccsr_l2cache_t;
+
+#define MPC85xx_L2CTL_L2E 0x80000000
+#define MPC85xx_L2CTL_L2SRAM_ENTIRE 0x00010000
+#define MPC85xx_L2ERRDIS_MBECC 0x00000008
+#define MPC85xx_L2ERRDIS_SBECC 0x00000004
+
+/* DMA Registers */
+typedef struct ccsr_dma {
+ u8 res1[256];
+ struct fsl_dma dma[4];
+ u32 dgsr; /* DMA General Status */
+ u8 res2[11516];
+} ccsr_dma_t;
+
+/* tsec */
+typedef struct ccsr_tsec {
+ u8 res1[16];
+ u32 ievent; /* IRQ Event */
+ u32 imask; /* IRQ Mask */
+ u32 edis; /* Error Disabled */
+ u8 res2[4];
+ u32 ecntrl; /* Ethernet Control */
+ u32 minflr; /* Minimum Frame Len */
+ u32 ptv; /* Pause Time Value */
+ u32 dmactrl; /* DMA Control */
+ u32 tbipa; /* TBI PHY Addr */
+ u8 res3[88];
+ u32 fifo_tx_thr; /* FIFO transmit threshold */
+ u8 res4[8];
+ u32 fifo_tx_starve; /* FIFO transmit starve */
+ u32 fifo_tx_starve_shutoff; /* FIFO transmit starve shutoff */
+ u8 res5[96];
+ u32 tctrl; /* TX Control */
+ u32 tstat; /* TX Status */
+ u8 res6[4];
+ u32 tbdlen; /* TX Buffer Desc Data Len */
+ u8 res7[16];
+ u32 ctbptrh; /* Current TX Buffer Desc Ptr High */
+ u32 ctbptr; /* Current TX Buffer Desc Ptr */
+ u8 res8[88];
+ u32 tbptrh; /* TX Buffer Desc Ptr High */
+ u32 tbptr; /* TX Buffer Desc Ptr Low */
+ u8 res9[120];
+ u32 tbaseh; /* TX Desc Base Addr High */
+ u32 tbase; /* TX Desc Base Addr */
+ u8 res10[168];
+ u32 ostbd; /* Out-of-Sequence(OOS) TX Buffer Desc */
+ u32 ostbdp; /* OOS TX Data Buffer Ptr */
+ u32 os32tbdp; /* OOS 32 Bytes TX Data Buffer Ptr Low */
+ u32 os32iptrh; /* OOS 32 Bytes TX Insert Ptr High */
+ u32 os32iptrl; /* OOS 32 Bytes TX Insert Ptr Low */
+ u32 os32tbdr; /* OOS 32 Bytes TX Reserved */
+ u32 os32iil; /* OOS 32 Bytes TX Insert Idx/Len */
+ u8 res11[52];
+ u32 rctrl; /* RX Control */
+ u32 rstat; /* RX Status */
+ u8 res12[4];
+ u32 rbdlen; /* RxBD Data Len */
+ u8 res13[16];
+ u32 crbptrh; /* Current RX Buffer Desc Ptr High */
+ u32 crbptr; /* Current RX Buffer Desc Ptr */
+ u8 res14[24];
+ u32 mrblr; /* Maximum RX Buffer Len */
+ u32 mrblr2r3; /* Maximum RX Buffer Len R2R3 */
+ u8 res15[56];
+ u32 rbptrh; /* RX Buffer Desc Ptr High 0 */
+ u32 rbptr; /* RX Buffer Desc Ptr */
+ u32 rbptrh1; /* RX Buffer Desc Ptr High 1 */
+ u32 rbptrl1; /* RX Buffer Desc Ptr Low 1 */
+ u32 rbptrh2; /* RX Buffer Desc Ptr High 2 */
+ u32 rbptrl2; /* RX Buffer Desc Ptr Low 2 */
+ u32 rbptrh3; /* RX Buffer Desc Ptr High 3 */
+ u32 rbptrl3; /* RX Buffer Desc Ptr Low 3 */
+ u8 res16[96];
+ u32 rbaseh; /* RX Desc Base Addr High 0 */
+ u32 rbase; /* RX Desc Base Addr */
+ u32 rbaseh1; /* RX Desc Base Addr High 1 */
+ u32 rbasel1; /* RX Desc Base Addr Low 1 */
+ u32 rbaseh2; /* RX Desc Base Addr High 2 */
+ u32 rbasel2; /* RX Desc Base Addr Low 2 */
+ u32 rbaseh3; /* RX Desc Base Addr High 3 */
+ u32 rbasel3; /* RX Desc Base Addr Low 3 */
+ u8 res17[224];
+ u32 maccfg1; /* MAC Configuration 1 */
+ u32 maccfg2; /* MAC Configuration 2 */
+ u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ u32 hafdup; /* Half Duplex */
+ u32 maxfrm; /* Maximum Frame Len */
+ u8 res18[12];
+ u32 miimcfg; /* MII Management Configuration */
+ u32 miimcom; /* MII Management Cmd */
+ u32 miimadd; /* MII Management Addr */
+ u32 miimcon; /* MII Management Control */
+ u32 miimstat; /* MII Management Status */
+ u32 miimind; /* MII Management Indicator */
+ u8 res19[4];
+ u32 ifstat; /* Interface Status */
+ u32 macstnaddr1; /* Station Addr Part 1 */
+ u32 macstnaddr2; /* Station Addr Part 2 */
+ u8 res20[312];
+ u32 tr64; /* TX & RX 64-byte Frame Counter */
+ u32 tr127; /* TX & RX 65-127 byte Frame Counter */
+ u32 tr255; /* TX & RX 128-255 byte Frame Counter */
+ u32 tr511; /* TX & RX 256-511 byte Frame Counter */
+ u32 tr1k; /* TX & RX 512-1023 byte Frame Counter */
+ u32 trmax; /* TX & RX 1024-1518 byte Frame Counter */
+ u32 trmgv; /* TX & RX 1519-1522 byte Good VLAN Frame */
+ u32 rbyt; /* RX Byte Counter */
+ u32 rpkt; /* RX Packet Counter */
+ u32 rfcs; /* RX FCS Error Counter */
+ u32 rmca; /* RX Multicast Packet Counter */
+ u32 rbca; /* RX Broadcast Packet Counter */
+ u32 rxcf; /* RX Control Frame Packet Counter */
+ u32 rxpf; /* RX Pause Frame Packet Counter */
+ u32 rxuo; /* RX Unknown OP Code Counter */
+ u32 raln; /* RX Alignment Error Counter */
+ u32 rflr; /* RX Frame Len Error Counter */
+ u32 rcde; /* RX Code Error Counter */
+ u32 rcse; /* RX Carrier Sense Error Counter */
+ u32 rund; /* RX Undersize Packet Counter */
+ u32 rovr; /* RX Oversize Packet Counter */
+ u32 rfrg; /* RX Fragments Counter */
+ u32 rjbr; /* RX Jabber Counter */
+ u32 rdrp; /* RX Drop Counter */
+ u32 tbyt; /* TX Byte Counter Counter */
+ u32 tpkt; /* TX Packet Counter */
+ u32 tmca; /* TX Multicast Packet Counter */
+ u32 tbca; /* TX Broadcast Packet Counter */
+ u32 txpf; /* TX Pause Control Frame Counter */
+ u32 tdfr; /* TX Deferral Packet Counter */
+ u32 tedf; /* TX Excessive Deferral Packet Counter */
+ u32 tscl; /* TX Single Collision Packet Counter */
+ u32 tmcl; /* TX Multiple Collision Packet Counter */
+ u32 tlcl; /* TX Late Collision Packet Counter */
+ u32 txcl; /* TX Excessive Collision Packet Counter */
+ u32 tncl; /* TX Total Collision Counter */
+ u8 res21[4];
+ u32 tdrp; /* TX Drop Frame Counter */
+ u32 tjbr; /* TX Jabber Frame Counter */
+ u32 tfcs; /* TX FCS Error Counter */
+ u32 txcf; /* TX Control Frame Counter */
+ u32 tovr; /* TX Oversize Frame Counter */
+ u32 tund; /* TX Undersize Frame Counter */
+ u32 tfrg; /* TX Fragments Frame Counter */
+ u32 car1; /* Carry One */
+ u32 car2; /* Carry Two */
+ u32 cam1; /* Carry Mask One */
+ u32 cam2; /* Carry Mask Two */
+ u8 res22[192];
+ u32 iaddr0; /* Indivdual addr 0 */
+ u32 iaddr1; /* Indivdual addr 1 */
+ u32 iaddr2; /* Indivdual addr 2 */
+ u32 iaddr3; /* Indivdual addr 3 */
+ u32 iaddr4; /* Indivdual addr 4 */
+ u32 iaddr5; /* Indivdual addr 5 */
+ u32 iaddr6; /* Indivdual addr 6 */
+ u32 iaddr7; /* Indivdual addr 7 */
+ u8 res23[96];
+ u32 gaddr0; /* Global addr 0 */
+ u32 gaddr1; /* Global addr 1 */
+ u32 gaddr2; /* Global addr 2 */
+ u32 gaddr3; /* Global addr 3 */
+ u32 gaddr4; /* Global addr 4 */
+ u32 gaddr5; /* Global addr 5 */
+ u32 gaddr6; /* Global addr 6 */
+ u32 gaddr7; /* Global addr 7 */
+ u8 res24[96];
+ u32 pmd0; /* Pattern Match Data */
+ u8 res25[4];
+ u32 pmask0; /* Pattern Mask */
+ u8 res26[4];
+ u32 pcntrl0; /* Pattern Match Control */
+ u8 res27[4];
+ u32 pattrb0; /* Pattern Match Attrs */
+ u32 pattrbeli0; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd1; /* Pattern Match Data */
+ u8 res28[4];
+ u32 pmask1; /* Pattern Mask */
+ u8 res29[4];
+ u32 pcntrl1; /* Pattern Match Control */
+ u8 res30[4];
+ u32 pattrb1; /* Pattern Match Attrs */
+ u32 pattrbeli1; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd2; /* Pattern Match Data */
+ u8 res31[4];
+ u32 pmask2; /* Pattern Mask */
+ u8 res32[4];
+ u32 pcntrl2; /* Pattern Match Control */
+ u8 res33[4];
+ u32 pattrb2; /* Pattern Match Attrs */
+ u32 pattrbeli2; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd3; /* Pattern Match Data */
+ u8 res34[4];
+ u32 pmask3; /* Pattern Mask */
+ u8 res35[4];
+ u32 pcntrl3; /* Pattern Match Control */
+ u8 res36[4];
+ u32 pattrb3; /* Pattern Match Attrs */
+ u32 pattrbeli3; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd4; /* Pattern Match Data */
+ u8 res37[4];
+ u32 pmask4; /* Pattern Mask */
+ u8 res38[4];
+ u32 pcntrl4; /* Pattern Match Control */
+ u8 res39[4];
+ u32 pattrb4; /* Pattern Match Attrs */
+ u32 pattrbeli4; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd5; /* Pattern Match Data */
+ u8 res40[4];
+ u32 pmask5; /* Pattern Mask */
+ u8 res41[4];
+ u32 pcntrl5; /* Pattern Match Control */
+ u8 res42[4];
+ u32 pattrb5; /* Pattern Match Attrs */
+ u32 pattrbeli5; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd6; /* Pattern Match Data */
+ u8 res43[4];
+ u32 pmask6; /* Pattern Mask */
+ u8 res44[4];
+ u32 pcntrl6; /* Pattern Match Control */
+ u8 res45[4];
+ u32 pattrb6; /* Pattern Match Attrs */
+ u32 pattrbeli6; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd7; /* Pattern Match Data */
+ u8 res46[4];
+ u32 pmask7; /* Pattern Mask */
+ u8 res47[4];
+ u32 pcntrl7; /* Pattern Match Control */
+ u8 res48[4];
+ u32 pattrb7; /* Pattern Match Attrs */
+ u32 pattrbeli7; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd8; /* Pattern Match Data */
+ u8 res49[4];
+ u32 pmask8; /* Pattern Mask */
+ u8 res50[4];
+ u32 pcntrl8; /* Pattern Match Control */
+ u8 res51[4];
+ u32 pattrb8; /* Pattern Match Attrs */
+ u32 pattrbeli8; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd9; /* Pattern Match Data */
+ u8 res52[4];
+ u32 pmask9; /* Pattern Mask */
+ u8 res53[4];
+ u32 pcntrl9; /* Pattern Match Control */
+ u8 res54[4];
+ u32 pattrb9; /* Pattern Match Attrs */
+ u32 pattrbeli9; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd10; /* Pattern Match Data */
+ u8 res55[4];
+ u32 pmask10; /* Pattern Mask */
+ u8 res56[4];
+ u32 pcntrl10; /* Pattern Match Control */
+ u8 res57[4];
+ u32 pattrb10; /* Pattern Match Attrs */
+ u32 pattrbeli10; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd11; /* Pattern Match Data */
+ u8 res58[4];
+ u32 pmask11; /* Pattern Mask */
+ u8 res59[4];
+ u32 pcntrl11; /* Pattern Match Control */
+ u8 res60[4];
+ u32 pattrb11; /* Pattern Match Attrs */
+ u32 pattrbeli11; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd12; /* Pattern Match Data */
+ u8 res61[4];
+ u32 pmask12; /* Pattern Mask */
+ u8 res62[4];
+ u32 pcntrl12; /* Pattern Match Control */
+ u8 res63[4];
+ u32 pattrb12; /* Pattern Match Attrs */
+ u32 pattrbeli12; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd13; /* Pattern Match Data */
+ u8 res64[4];
+ u32 pmask13; /* Pattern Mask */
+ u8 res65[4];
+ u32 pcntrl13; /* Pattern Match Control */
+ u8 res66[4];
+ u32 pattrb13; /* Pattern Match Attrs */
+ u32 pattrbeli13; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd14; /* Pattern Match Data */
+ u8 res67[4];
+ u32 pmask14; /* Pattern Mask */
+ u8 res68[4];
+ u32 pcntrl14; /* Pattern Match Control */
+ u8 res69[4];
+ u32 pattrb14; /* Pattern Match Attrs */
+ u32 pattrbeli14; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd15; /* Pattern Match Data */
+ u8 res70[4];
+ u32 pmask15; /* Pattern Mask */
+ u8 res71[4];
+ u32 pcntrl15; /* Pattern Match Control */
+ u8 res72[4];
+ u32 pattrb15; /* Pattern Match Attrs */
+ u32 pattrbeli15; /* Pattern Match Attrs Extract Len & Idx */
+ u8 res73[248];
+ u32 attr; /* Attrs */
+ u32 attreli; /* Attrs Extract Len & Idx */
+ u8 res74[1024];
+} ccsr_tsec_t;
+
+/* PIC Registers */
+typedef struct ccsr_pic {
+ u8 res1[64];
+ u32 ipidr0; /* Interprocessor IRQ Dispatch 0 */
+ u8 res2[12];
+ u32 ipidr1; /* Interprocessor IRQ Dispatch 1 */
+ u8 res3[12];
+ u32 ipidr2; /* Interprocessor IRQ Dispatch 2 */
+ u8 res4[12];
+ u32 ipidr3; /* Interprocessor IRQ Dispatch 3 */
+ u8 res5[12];
+ u32 ctpr; /* Current Task Priority */
+ u8 res6[12];
+ u32 whoami; /* Who Am I */
+ u8 res7[12];
+ u32 iack; /* IRQ Acknowledge */
+ u8 res8[12];
+ u32 eoi; /* End Of IRQ */
+ u8 res9[3916];
+ u32 frr; /* Feature Reporting */
+ u8 res10[28];
+ u32 gcr; /* Global Configuration */
+#define MPC85xx_PICGCR_RST 0x80000000
+#define MPC85xx_PICGCR_M 0x20000000
+ u8 res11[92];
+ u32 vir; /* Vendor Identification */
+ u8 res12[12];
+ u32 pir; /* Processor Initialization */
+ u8 res13[12];
+ u32 ipivpr0; /* IPI Vector/Priority 0 */
+ u8 res14[12];
+ u32 ipivpr1; /* IPI Vector/Priority 1 */
+ u8 res15[12];
+ u32 ipivpr2; /* IPI Vector/Priority 2 */
+ u8 res16[12];
+ u32 ipivpr3; /* IPI Vector/Priority 3 */
+ u8 res17[12];
+ u32 svr; /* Spurious Vector */
+ u8 res18[12];
+ u32 tfrr; /* Timer Frequency Reporting */
+ u8 res19[12];
+ u32 gtccr0; /* Global Timer Current Count 0 */
+ u8 res20[12];
+ u32 gtbcr0; /* Global Timer Base Count 0 */
+ u8 res21[12];
+ u32 gtvpr0; /* Global Timer Vector/Priority 0 */
+ u8 res22[12];
+ u32 gtdr0; /* Global Timer Destination 0 */
+ u8 res23[12];
+ u32 gtccr1; /* Global Timer Current Count 1 */
+ u8 res24[12];
+ u32 gtbcr1; /* Global Timer Base Count 1 */
+ u8 res25[12];
+ u32 gtvpr1; /* Global Timer Vector/Priority 1 */
+ u8 res26[12];
+ u32 gtdr1; /* Global Timer Destination 1 */
+ u8 res27[12];
+ u32 gtccr2; /* Global Timer Current Count 2 */
+ u8 res28[12];
+ u32 gtbcr2; /* Global Timer Base Count 2 */
+ u8 res29[12];
+ u32 gtvpr2; /* Global Timer Vector/Priority 2 */
+ u8 res30[12];
+ u32 gtdr2; /* Global Timer Destination 2 */
+ u8 res31[12];
+ u32 gtccr3; /* Global Timer Current Count 3 */
+ u8 res32[12];
+ u32 gtbcr3; /* Global Timer Base Count 3 */
+ u8 res33[12];
+ u32 gtvpr3; /* Global Timer Vector/Priority 3 */
+ u8 res34[12];
+ u32 gtdr3; /* Global Timer Destination 3 */
+ u8 res35[268];
+ u32 tcr; /* Timer Control */
+ u8 res36[12];
+ u32 irqsr0; /* IRQ_OUT Summary 0 */
+ u8 res37[12];
+ u32 irqsr1; /* IRQ_OUT Summary 1 */
+ u8 res38[12];
+ u32 cisr0; /* Critical IRQ Summary 0 */
+ u8 res39[12];
+ u32 cisr1; /* Critical IRQ Summary 1 */
+ u8 res40[188];
+ u32 msgr0; /* Message 0 */
+ u8 res41[12];
+ u32 msgr1; /* Message 1 */
+ u8 res42[12];
+ u32 msgr2; /* Message 2 */
+ u8 res43[12];
+ u32 msgr3; /* Message 3 */
+ u8 res44[204];
+ u32 mer; /* Message Enable */
+ u8 res45[12];
+ u32 msr; /* Message Status */
+ u8 res46[60140];
+ u32 eivpr0; /* External IRQ Vector/Priority 0 */
+ u8 res47[12];
+ u32 eidr0; /* External IRQ Destination 0 */
+ u8 res48[12];
+ u32 eivpr1; /* External IRQ Vector/Priority 1 */
+ u8 res49[12];
+ u32 eidr1; /* External IRQ Destination 1 */
+ u8 res50[12];
+ u32 eivpr2; /* External IRQ Vector/Priority 2 */
+ u8 res51[12];
+ u32 eidr2; /* External IRQ Destination 2 */
+ u8 res52[12];
+ u32 eivpr3; /* External IRQ Vector/Priority 3 */
+ u8 res53[12];
+ u32 eidr3; /* External IRQ Destination 3 */
+ u8 res54[12];
+ u32 eivpr4; /* External IRQ Vector/Priority 4 */
+ u8 res55[12];
+ u32 eidr4; /* External IRQ Destination 4 */
+ u8 res56[12];
+ u32 eivpr5; /* External IRQ Vector/Priority 5 */
+ u8 res57[12];
+ u32 eidr5; /* External IRQ Destination 5 */
+ u8 res58[12];
+ u32 eivpr6; /* External IRQ Vector/Priority 6 */
+ u8 res59[12];
+ u32 eidr6; /* External IRQ Destination 6 */
+ u8 res60[12];
+ u32 eivpr7; /* External IRQ Vector/Priority 7 */
+ u8 res61[12];
+ u32 eidr7; /* External IRQ Destination 7 */
+ u8 res62[12];
+ u32 eivpr8; /* External IRQ Vector/Priority 8 */
+ u8 res63[12];
+ u32 eidr8; /* External IRQ Destination 8 */
+ u8 res64[12];
+ u32 eivpr9; /* External IRQ Vector/Priority 9 */
+ u8 res65[12];
+ u32 eidr9; /* External IRQ Destination 9 */
+ u8 res66[12];
+ u32 eivpr10; /* External IRQ Vector/Priority 10 */
+ u8 res67[12];
+ u32 eidr10; /* External IRQ Destination 10 */
+ u8 res68[12];
+ u32 eivpr11; /* External IRQ Vector/Priority 11 */
+ u8 res69[12];
+ u32 eidr11; /* External IRQ Destination 11 */
+ u8 res70[140];
+ u32 iivpr0; /* Internal IRQ Vector/Priority 0 */
+ u8 res71[12];
+ u32 iidr0; /* Internal IRQ Destination 0 */
+ u8 res72[12];
+ u32 iivpr1; /* Internal IRQ Vector/Priority 1 */
+ u8 res73[12];
+ u32 iidr1; /* Internal IRQ Destination 1 */
+ u8 res74[12];
+ u32 iivpr2; /* Internal IRQ Vector/Priority 2 */
+ u8 res75[12];
+ u32 iidr2; /* Internal IRQ Destination 2 */
+ u8 res76[12];
+ u32 iivpr3; /* Internal IRQ Vector/Priority 3 */
+ u8 res77[12];
+ u32 iidr3; /* Internal IRQ Destination 3 */
+ u8 res78[12];
+ u32 iivpr4; /* Internal IRQ Vector/Priority 4 */
+ u8 res79[12];
+ u32 iidr4; /* Internal IRQ Destination 4 */
+ u8 res80[12];
+ u32 iivpr5; /* Internal IRQ Vector/Priority 5 */
+ u8 res81[12];
+ u32 iidr5; /* Internal IRQ Destination 5 */
+ u8 res82[12];
+ u32 iivpr6; /* Internal IRQ Vector/Priority 6 */
+ u8 res83[12];
+ u32 iidr6; /* Internal IRQ Destination 6 */
+ u8 res84[12];
+ u32 iivpr7; /* Internal IRQ Vector/Priority 7 */
+ u8 res85[12];
+ u32 iidr7; /* Internal IRQ Destination 7 */
+ u8 res86[12];
+ u32 iivpr8; /* Internal IRQ Vector/Priority 8 */
+ u8 res87[12];
+ u32 iidr8; /* Internal IRQ Destination 8 */
+ u8 res88[12];
+ u32 iivpr9; /* Internal IRQ Vector/Priority 9 */
+ u8 res89[12];
+ u32 iidr9; /* Internal IRQ Destination 9 */
+ u8 res90[12];
+ u32 iivpr10; /* Internal IRQ Vector/Priority 10 */
+ u8 res91[12];
+ u32 iidr10; /* Internal IRQ Destination 10 */
+ u8 res92[12];
+ u32 iivpr11; /* Internal IRQ Vector/Priority 11 */
+ u8 res93[12];
+ u32 iidr11; /* Internal IRQ Destination 11 */
+ u8 res94[12];
+ u32 iivpr12; /* Internal IRQ Vector/Priority 12 */
+ u8 res95[12];
+ u32 iidr12; /* Internal IRQ Destination 12 */
+ u8 res96[12];
+ u32 iivpr13; /* Internal IRQ Vector/Priority 13 */
+ u8 res97[12];
+ u32 iidr13; /* Internal IRQ Destination 13 */
+ u8 res98[12];
+ u32 iivpr14; /* Internal IRQ Vector/Priority 14 */
+ u8 res99[12];
+ u32 iidr14; /* Internal IRQ Destination 14 */
+ u8 res100[12];
+ u32 iivpr15; /* Internal IRQ Vector/Priority 15 */
+ u8 res101[12];
+ u32 iidr15; /* Internal IRQ Destination 15 */
+ u8 res102[12];
+ u32 iivpr16; /* Internal IRQ Vector/Priority 16 */
+ u8 res103[12];
+ u32 iidr16; /* Internal IRQ Destination 16 */
+ u8 res104[12];
+ u32 iivpr17; /* Internal IRQ Vector/Priority 17 */
+ u8 res105[12];
+ u32 iidr17; /* Internal IRQ Destination 17 */
+ u8 res106[12];
+ u32 iivpr18; /* Internal IRQ Vector/Priority 18 */
+ u8 res107[12];
+ u32 iidr18; /* Internal IRQ Destination 18 */
+ u8 res108[12];
+ u32 iivpr19; /* Internal IRQ Vector/Priority 19 */
+ u8 res109[12];
+ u32 iidr19; /* Internal IRQ Destination 19 */
+ u8 res110[12];
+ u32 iivpr20; /* Internal IRQ Vector/Priority 20 */
+ u8 res111[12];
+ u32 iidr20; /* Internal IRQ Destination 20 */
+ u8 res112[12];
+ u32 iivpr21; /* Internal IRQ Vector/Priority 21 */
+ u8 res113[12];
+ u32 iidr21; /* Internal IRQ Destination 21 */
+ u8 res114[12];
+ u32 iivpr22; /* Internal IRQ Vector/Priority 22 */
+ u8 res115[12];
+ u32 iidr22; /* Internal IRQ Destination 22 */
+ u8 res116[12];
+ u32 iivpr23; /* Internal IRQ Vector/Priority 23 */
+ u8 res117[12];
+ u32 iidr23; /* Internal IRQ Destination 23 */
+ u8 res118[12];
+ u32 iivpr24; /* Internal IRQ Vector/Priority 24 */
+ u8 res119[12];
+ u32 iidr24; /* Internal IRQ Destination 24 */
+ u8 res120[12];
+ u32 iivpr25; /* Internal IRQ Vector/Priority 25 */
+ u8 res121[12];
+ u32 iidr25; /* Internal IRQ Destination 25 */
+ u8 res122[12];
+ u32 iivpr26; /* Internal IRQ Vector/Priority 26 */
+ u8 res123[12];
+ u32 iidr26; /* Internal IRQ Destination 26 */
+ u8 res124[12];
+ u32 iivpr27; /* Internal IRQ Vector/Priority 27 */
+ u8 res125[12];
+ u32 iidr27; /* Internal IRQ Destination 27 */
+ u8 res126[12];
+ u32 iivpr28; /* Internal IRQ Vector/Priority 28 */
+ u8 res127[12];
+ u32 iidr28; /* Internal IRQ Destination 28 */
+ u8 res128[12];
+ u32 iivpr29; /* Internal IRQ Vector/Priority 29 */
+ u8 res129[12];
+ u32 iidr29; /* Internal IRQ Destination 29 */
+ u8 res130[12];
+ u32 iivpr30; /* Internal IRQ Vector/Priority 30 */
+ u8 res131[12];
+ u32 iidr30; /* Internal IRQ Destination 30 */
+ u8 res132[12];
+ u32 iivpr31; /* Internal IRQ Vector/Priority 31 */
+ u8 res133[12];
+ u32 iidr31; /* Internal IRQ Destination 31 */
+ u8 res134[4108];
+ u32 mivpr0; /* Messaging IRQ Vector/Priority 0 */
+ u8 res135[12];
+ u32 midr0; /* Messaging IRQ Destination 0 */
+ u8 res136[12];
+ u32 mivpr1; /* Messaging IRQ Vector/Priority 1 */
+ u8 res137[12];
+ u32 midr1; /* Messaging IRQ Destination 1 */
+ u8 res138[12];
+ u32 mivpr2; /* Messaging IRQ Vector/Priority 2 */
+ u8 res139[12];
+ u32 midr2; /* Messaging IRQ Destination 2 */
+ u8 res140[12];
+ u32 mivpr3; /* Messaging IRQ Vector/Priority 3 */
+ u8 res141[12];
+ u32 midr3; /* Messaging IRQ Destination 3 */
+ u8 res142[59852];
+ u32 ipi0dr0; /* Processor 0 Interprocessor IRQ Dispatch 0 */
+ u8 res143[12];
+ u32 ipi0dr1; /* Processor 0 Interprocessor IRQ Dispatch 1 */
+ u8 res144[12];
+ u32 ipi0dr2; /* Processor 0 Interprocessor IRQ Dispatch 2 */
+ u8 res145[12];
+ u32 ipi0dr3; /* Processor 0 Interprocessor IRQ Dispatch 3 */
+ u8 res146[12];
+ u32 ctpr0; /* Current Task Priority for Processor 0 */
+ u8 res147[12];
+ u32 whoami0; /* Who Am I for Processor 0 */
+ u8 res148[12];
+ u32 iack0; /* IRQ Acknowledge for Processor 0 */
+ u8 res149[12];
+ u32 eoi0; /* End Of IRQ for Processor 0 */
+ u8 res150[130892];
+} ccsr_pic_t;
+
+/* CPM Block */
+#ifndef CONFIG_CPM2
+typedef struct ccsr_cpm {
+ u8 res[262144];
+} ccsr_cpm_t;
+#else
+/*
+ * DPARM
+ * General SIU
+ */
+typedef struct ccsr_cpm_siu {
+ u8 res1[80];
+ u32 smaer;
+ u32 smser;
+ u32 smevr;
+ u8 res2[4];
+ u32 lmaer;
+ u32 lmser;
+ u32 lmevr;
+ u8 res3[2964];
+} ccsr_cpm_siu_t;
+
+/* IRQ Controller */
+typedef struct ccsr_cpm_intctl {
+ u16 sicr;
+ u8 res1[2];
+ u32 sivec;
+ u32 sipnrh;
+ u32 sipnrl;
+ u32 siprr;
+ u32 scprrh;
+ u32 scprrl;
+ u32 simrh;
+ u32 simrl;
+ u32 siexr;
+ u8 res2[88];
+ u32 sccr;
+ u8 res3[124];
+} ccsr_cpm_intctl_t;
+
+/* input/output port */
+typedef struct ccsr_cpm_iop {
+ u32 pdira;
+ u32 ppara;
+ u32 psora;
+ u32 podra;
+ u32 pdata;
+ u8 res1[12];
+ u32 pdirb;
+ u32 pparb;
+ u32 psorb;
+ u32 podrb;
+ u32 pdatb;
+ u8 res2[12];
+ u32 pdirc;
+ u32 pparc;
+ u32 psorc;
+ u32 podrc;
+ u32 pdatc;
+ u8 res3[12];
+ u32 pdird;
+ u32 ppard;
+ u32 psord;
+ u32 podrd;
+ u32 pdatd;
+ u8 res4[12];
+} ccsr_cpm_iop_t;
+
+/* CPM timers */
+typedef struct ccsr_cpm_timer {
+ u8 tgcr1;
+ u8 res1[3];
+ u8 tgcr2;
+ u8 res2[11];
+ u16 tmr1;
+ u16 tmr2;
+ u16 trr1;
+ u16 trr2;
+ u16 tcr1;
+ u16 tcr2;
+ u16 tcn1;
+ u16 tcn2;
+ u16 tmr3;
+ u16 tmr4;
+ u16 trr3;
+ u16 trr4;
+ u16 tcr3;
+ u16 tcr4;
+ u16 tcn3;
+ u16 tcn4;
+ u16 ter1;
+ u16 ter2;
+ u16 ter3;
+ u16 ter4;
+ u8 res3[608];
+} ccsr_cpm_timer_t;
+
+/* SDMA */
+typedef struct ccsr_cpm_sdma {
+ u8 sdsr;
+ u8 res1[3];
+ u8 sdmr;
+ u8 res2[739];
+} ccsr_cpm_sdma_t;
+
+/* FCC1 */
+typedef struct ccsr_cpm_fcc1 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
+} ccsr_cpm_fcc1_t;
+
+/* FCC2 */
+typedef struct ccsr_cpm_fcc2 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
+} ccsr_cpm_fcc2_t;
+
+/* FCC3 */
+typedef struct ccsr_cpm_fcc3 {
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 res[36];
+} ccsr_cpm_fcc3_t;
+
+/* FCC1 extended */
+typedef struct ccsr_cpm_fcc1_ext {
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[15];
+
+} ccsr_cpm_fcc1_ext_t;
+
+/* FCC2 extended */
+typedef struct ccsr_cpm_fcc2_ext {
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[31];
+} ccsr_cpm_fcc2_ext_t;
+
+/* FCC3 extended */
+typedef struct ccsr_cpm_fcc3_ext {
+ u8 gfemr;
+ u8 res[47];
+} ccsr_cpm_fcc3_ext_t;
+
+/* TC layers */
+typedef struct ccsr_cpm_tmp1 {
+ u8 res[496];
+} ccsr_cpm_tmp1_t;
+
+/* BRGs:5,6,7,8 */
+typedef struct ccsr_cpm_brg2 {
+ u32 brgc5;
+ u32 brgc6;
+ u32 brgc7;
+ u32 brgc8;
+ u8 res[608];
+} ccsr_cpm_brg2_t;
+
+/* I2C */
+typedef struct ccsr_cpm_i2c {
+ u8 i2mod;
+ u8 res1[3];
+ u8 i2add;
+ u8 res2[3];
+ u8 i2brg;
+ u8 res3[3];
+ u8 i2com;
+ u8 res4[3];
+ u8 i2cer;
+ u8 res5[3];
+ u8 i2cmr;
+ u8 res6[331];
+} ccsr_cpm_i2c_t;
+
+/* CPM core */
+typedef struct ccsr_cpm_cp {
+ u32 cpcr;
+ u32 rccr;
+ u8 res1[14];
+ u16 rter;
+ u8 res2[2];
+ u16 rtmr;
+ u16 rtscr;
+ u8 res3[2];
+ u32 rtsr;
+ u8 res4[12];
+} ccsr_cpm_cp_t;
+
+/* BRGs:1,2,3,4 */
+typedef struct ccsr_cpm_brg1 {
+ u32 brgc1;
+ u32 brgc2;
+ u32 brgc3;
+ u32 brgc4;
+} ccsr_cpm_brg1_t;
+
+/* SCC1-SCC4 */
+typedef struct ccsr_cpm_scc {
+ u32 gsmrl;
+ u32 gsmrh;
+ u16 psmr;
+ u8 res1[2];
+ u16 todr;
+ u16 dsr;
+ u16 scce;
+ u8 res2[2];
+ u16 sccm;
+ u8 res3;
+ u8 sccs;
+ u8 res4[8];
+} ccsr_cpm_scc_t;
+
+typedef struct ccsr_cpm_tmp2 {
+ u8 res[32];
+} ccsr_cpm_tmp2_t;
+
+/* SPI */
+typedef struct ccsr_cpm_spi {
+ u16 spmode;
+ u8 res1[4];
+ u8 spie;
+ u8 res2[3];
+ u8 spim;
+ u8 res3[2];
+ u8 spcom;
+ u8 res4[82];
+} ccsr_cpm_spi_t;
+
+/* CPM MUX */
+typedef struct ccsr_cpm_mux {
+ u8 cmxsi1cr;
+ u8 res1;
+ u8 cmxsi2cr;
+ u8 res2;
+ u32 cmxfcr;
+ u32 cmxscr;
+ u8 res3[2];
+ u16 cmxuar;
+ u8 res4[16];
+} ccsr_cpm_mux_t;
+
+/* SI,MCC,etc */
+typedef struct ccsr_cpm_tmp3 {
+ u8 res[58592];
+} ccsr_cpm_tmp3_t;
+
+typedef struct ccsr_cpm_iram {
+ u32 iram[8192];
+ u8 res[98304];
+} ccsr_cpm_iram_t;
+
+typedef struct ccsr_cpm {
+ /* Some references are into the unique & known dpram spaces,
+ * others are from the generic base.
+ */
+#define im_dprambase im_dpram1
+ u8 im_dpram1[16*1024];
+ u8 res1[16*1024];
+ u8 im_dpram2[16*1024];
+ u8 res2[16*1024];
+ ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
+ ccsr_cpm_intctl_t im_cpm_intctl; /* IRQ Controller */
+ ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
+ ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
+ ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
+ ccsr_cpm_fcc1_t im_cpm_fcc1;
+ ccsr_cpm_fcc2_t im_cpm_fcc2;
+ ccsr_cpm_fcc3_t im_cpm_fcc3;
+ ccsr_cpm_fcc1_ext_t im_cpm_fcc1_ext;
+ ccsr_cpm_fcc2_ext_t im_cpm_fcc2_ext;
+ ccsr_cpm_fcc3_ext_t im_cpm_fcc3_ext;
+ ccsr_cpm_tmp1_t im_cpm_tmp1;
+ ccsr_cpm_brg2_t im_cpm_brg2;
+ ccsr_cpm_i2c_t im_cpm_i2c;
+ ccsr_cpm_cp_t im_cpm_cp;
+ ccsr_cpm_brg1_t im_cpm_brg1;
+ ccsr_cpm_scc_t im_cpm_scc[4];
+ ccsr_cpm_tmp2_t im_cpm_tmp2;
+ ccsr_cpm_spi_t im_cpm_spi;
+ ccsr_cpm_mux_t im_cpm_mux;
+ ccsr_cpm_tmp3_t im_cpm_tmp3;
+ ccsr_cpm_iram_t im_cpm_iram;
+} ccsr_cpm_t;
+#endif
+
+/* RapidIO Registers */
+typedef struct ccsr_rio {
+ u32 didcar; /* Device Identity Capability */
+ u32 dicar; /* Device Information Capability */
+ u32 aidcar; /* Assembly Identity Capability */
+ u32 aicar; /* Assembly Information Capability */
+ u32 pefcar; /* Processing Element Features Capability */
+ u32 spicar; /* Switch Port Information Capability */
+ u32 socar; /* Source Operations Capability */
+ u32 docar; /* Destination Operations Capability */
+ u8 res1[32];
+ u32 msr; /* Mailbox Cmd And Status */
+ u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */
+ u8 res2[4];
+ u32 pellccsr; /* Processing Element Logic Layer CCSR */
+ u8 res3[12];
+ u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */
+ u32 bdidcsr; /* Base Device ID Cmd & Status */
+ u8 res4[4];
+ u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */
+ u32 ctcsr; /* Component Tag Cmd & Status */
+ u8 res5[144];
+ u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */
+ u8 res6[28];
+ u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */
+ u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */
+ u8 res7[20];
+ u32 pgccsr; /* Port General Cmd & Status */
+ u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */
+ u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */
+ u32 plascsr; /* Port Local Ackid Status Cmd & Status */
+ u8 res8[12];
+ u32 pescsr; /* Port Error & Status Cmd & Status */
+ u32 pccsr; /* Port Control Cmd & Status */
+ u8 res9[65184];
+ u32 cr; /* Port Control Cmd & Status */
+ u8 res10[12];
+ u32 pcr; /* Port Configuration */
+ u32 peir; /* Port Error Injection */
+ u8 res11[3048];
+ u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */
+ u8 res12[12];
+ u32 rowar0; /* RIO Outbound Attrs 0 */
+ u8 res13[12];
+ u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */
+ u8 res14[4];
+ u32 rowbar1; /* RIO Outbound Window Base Addr 1 */
+ u8 res15[4];
+ u32 rowar1; /* RIO Outbound Attrs 1 */
+ u8 res16[12];
+ u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */
+ u8 res17[4];
+ u32 rowbar2; /* RIO Outbound Window Base Addr 2 */
+ u8 res18[4];
+ u32 rowar2; /* RIO Outbound Attrs 2 */
+ u8 res19[12];
+ u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */
+ u8 res20[4];
+ u32 rowbar3; /* RIO Outbound Window Base Addr 3 */
+ u8 res21[4];
+ u32 rowar3; /* RIO Outbound Attrs 3 */
+ u8 res22[12];
+ u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */
+ u8 res23[4];
+ u32 rowbar4; /* RIO Outbound Window Base Addr 4 */
+ u8 res24[4];
+ u32 rowar4; /* RIO Outbound Attrs 4 */
+ u8 res25[12];
+ u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */
+ u8 res26[4];
+ u32 rowbar5; /* RIO Outbound Window Base Addr 5 */
+ u8 res27[4];
+ u32 rowar5; /* RIO Outbound Attrs 5 */
+ u8 res28[12];
+ u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */
+ u8 res29[4];
+ u32 rowbar6; /* RIO Outbound Window Base Addr 6 */
+ u8 res30[4];
+ u32 rowar6; /* RIO Outbound Attrs 6 */
+ u8 res31[12];
+ u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */
+ u8 res32[4];
+ u32 rowbar7; /* RIO Outbound Window Base Addr 7 */
+ u8 res33[4];
+ u32 rowar7; /* RIO Outbound Attrs 7 */
+ u8 res34[12];
+ u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */
+ u8 res35[4];
+ u32 rowbar8; /* RIO Outbound Window Base Addr 8 */
+ u8 res36[4];
+ u32 rowar8; /* RIO Outbound Attrs 8 */
+ u8 res37[76];
+ u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */
+ u8 res38[4];
+ u32 riwbar4; /* RIO Inbound Window Base Addr 4 */
+ u8 res39[4];
+ u32 riwar4; /* RIO Inbound Attrs 4 */
+ u8 res40[12];
+ u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */
+ u8 res41[4];
+ u32 riwbar3; /* RIO Inbound Window Base Addr 3 */
+ u8 res42[4];
+ u32 riwar3; /* RIO Inbound Attrs 3 */
+ u8 res43[12];
+ u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */
+ u8 res44[4];
+ u32 riwbar2; /* RIO Inbound Window Base Addr 2 */
+ u8 res45[4];
+ u32 riwar2; /* RIO Inbound Attrs 2 */
+ u8 res46[12];
+ u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */
+ u8 res47[4];
+ u32 riwbar1; /* RIO Inbound Window Base Addr 1 */
+ u8 res48[4];
+ u32 riwar1; /* RIO Inbound Attrs 1 */
+ u8 res49[12];
+ u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */
+ u8 res50[12];
+ u32 riwar0; /* RIO Inbound Attrs 0 */
+ u8 res51[12];
+ u32 pnfedr; /* Port Notification/Fatal Error Detect */
+ u32 pnfedir; /* Port Notification/Fatal Error Detect */
+ u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */
+ u32 pecr; /* Port Error Control */
+ u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */
+ u32 pepr1; /* Port Error Packet 1 */
+ u32 pepr2; /* Port Error Packet 2 */
+ u8 res52[4];
+ u32 predr; /* Port Recoverable Error Detect */
+ u8 res53[4];
+ u32 pertr; /* Port Error Recovery Threshold */
+ u32 prtr; /* Port Retry Threshold */
+ u8 res54[464];
+ u32 omr; /* Outbound Mode */
+ u32 osr; /* Outbound Status */
+ u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */
+ u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */
+ u32 eosar; /* Extended Outbound Unit Source Addr */
+ u32 osar; /* Outbound Unit Source Addr */
+ u32 odpr; /* Outbound Destination Port */
+ u32 odatr; /* Outbound Destination Attrs */
+ u32 odcr; /* Outbound Doubleword Count */
+ u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */
+ u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */
+ u8 res55[52];
+ u32 imr; /* Outbound Mode */
+ u32 isr; /* Inbound Status */
+ u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */
+ u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */
+ u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */
+ u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */
+ u8 res56[1000];
+ u32 dmr; /* Doorbell Mode */
+ u32 dsr; /* Doorbell Status */
+ u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */
+ u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */
+ u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */
+ u32 dqhpar; /* Doorbell Queue Head Ptr Addr */
+ u8 res57[104];
+ u32 pwmr; /* Port-Write Mode */
+ u32 pwsr; /* Port-Write Status */
+ u32 epwqbar; /* Extended Port-Write Queue Base Addr */
+ u32 pwqbar; /* Port-Write Queue Base Addr */
+ u8 res58[60176];
+} ccsr_rio_t;
+
+/* Quick Engine Block Pin Muxing Registers */
+typedef struct par_io {
+ u32 cpodr;
+ u32 cpdat;
+ u32 cpdir1;
+ u32 cpdir2;
+ u32 cppar1;
+ u32 cppar2;
+ u8 res[8];
+} par_io_t;
+
+#ifdef CONFIG_SYS_FSL_CPC
+/*
+ * Define a single offset that is the start of all the CPC register
+ * blocks - if there is more than one CPC, we expect these to be
+ * contiguous 4k regions
+ */
+
+typedef struct cpc_corenet {
+ u32 cpccsr0; /* Config/status reg */
+ u32 res1;
+ u32 cpccfg0; /* Configuration register */
+ u32 res2;
+ u32 cpcewcr0; /* External Write reg 0 */
+ u32 cpcewabr0; /* External write base reg 0 */
+ u32 res3[2];
+ u32 cpcewcr1; /* External Write reg 1 */
+ u32 cpcewabr1; /* External write base reg 1 */
+ u32 res4[54];
+ u32 cpcsrcr1; /* SRAM control reg 1 */
+ u32 cpcsrcr0; /* SRAM control reg 0 */
+ u32 res5[62];
+ struct {
+ u32 id; /* partition ID */
+ u32 res;
+ u32 alloc; /* partition allocation */
+ u32 way; /* partition way */
+ } partition_regs[16];
+ u32 res6[704];
+ u32 cpcerrinjhi; /* Error injection high */
+ u32 cpcerrinjlo; /* Error injection lo */
+ u32 cpcerrinjctl; /* Error injection control */
+ u32 res7[5];
+ u32 cpccaptdatahi; /* capture data high */
+ u32 cpccaptdatalo; /* capture data low */
+ u32 cpcaptecc; /* capture ECC */
+ u32 res8[5];
+ u32 cpcerrdet; /* error detect */
+ u32 cpcerrdis; /* error disable */
+ u32 cpcerrinten; /* errir interrupt enable */
+ u32 cpcerrattr; /* error attribute */
+ u32 cpcerreaddr; /* error extended address */
+ u32 cpcerraddr; /* error address */
+ u32 cpcerrctl; /* error control */
+ u32 res9[105]; /* pad out to 4k */
+} cpc_corenet_t;
+
+#define CPC_CSR0_CE 0x80000000 /* Cache Enable */
+#define CPC_CSR0_PE 0x40000000 /* Enable ECC */
+#define CPC_CSR0_FI 0x00200000 /* Cache Flash Invalidate */
+#define CPC_CSR0_WT 0x00080000 /* Write-through mode */
+#define CPC_CSR0_FL 0x00000800 /* Hardware cache flush */
+#define CPC_CSR0_LFC 0x00000400 /* Cache Lock Flash Clear */
+#define CPC_CFG0_SZ_MASK 0x00003fff
+#define CPC_CFG0_SZ_K(x) ((x & CPC_CFG0_SZ_MASK) << 6)
+#define CPC_CFG0_NUM_WAYS(x) (((x >> 14) & 0x1f) + 1)
+#define CPC_CFG0_LINE_SZ(x) ((((x >> 23) & 0x3) + 1) * 32)
+#define CPC_SRCR1_SRBARU_MASK 0x0000ffff
+#define CPC_SRCR1_SRBARU(x) (((unsigned long long)x >> 32) \
+ & CPC_SRCR1_SRBARU_MASK)
+#define CPC_SRCR0_SRBARL_MASK 0xffff8000
+#define CPC_SRCR0_SRBARL(x) (x & CPC_SRCR0_SRBARL_MASK)
+#define CPC_SRCR0_INTLVEN 0x00000100
+#define CPC_SRCR0_SRAMSZ_1_WAY 0x00000000
+#define CPC_SRCR0_SRAMSZ_2_WAY 0x00000002
+#define CPC_SRCR0_SRAMSZ_4_WAY 0x00000004
+#define CPC_SRCR0_SRAMSZ_8_WAY 0x00000006
+#define CPC_SRCR0_SRAMSZ_16_WAY 0x00000008
+#define CPC_SRCR0_SRAMSZ_32_WAY 0x0000000a
+#define CPC_SRCR0_SRAMEN 0x00000001
+#define CPC_ERRDIS_TMHITDIS 0x00000080 /* multi-way hit disable */
+#endif /* CONFIG_SYS_FSL_CPC */
+
+/* Global Utilities Block */
+#ifdef CONFIG_FSL_CORENET
+typedef struct ccsr_gur {
+ u32 porsr1; /* POR status */
+ u8 res1[28];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u8 res2[12];
+ u32 gpiocr; /* GPIO control */
+ u8 res3[12];
+ u32 gpoutdr; /* General-purpose output data */
+ u8 res4[12];
+ u32 gpindr; /* General-purpose input data */
+ u8 res5[12];
+ u32 pmuxcr; /* Alt function signal multiplex control */
+ u8 res6[12];
+ u32 devdisr; /* Device disable control */
+#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
+#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
+#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
+#define FSL_CORENET_DEVDISR_RMU 0x08000000
+#define FSL_CORENET_DEVDISR_SRIO1 0x04000000
+#define FSL_CORENET_DEVDISR_SRIO2 0x02000000
+#define FSL_CORENET_DEVDISR_DMA1 0x00400000
+#define FSL_CORENET_DEVDISR_DMA2 0x00200000
+#define FSL_CORENET_DEVDISR_DDR1 0x00100000
+#define FSL_CORENET_DEVDISR_DDR2 0x00080000
+#define FSL_CORENET_DEVDISR_DBG 0x00010000
+#define FSL_CORENET_DEVDISR_NAL 0x00008000
+#define FSL_CORENET_DEVDISR_ELBC 0x00001000
+#define FSL_CORENET_DEVDISR_USB1 0x00000800
+#define FSL_CORENET_DEVDISR_USB2 0x00000400
+#define FSL_CORENET_DEVDISR_ESDHC 0x00000100
+#define FSL_CORENET_DEVDISR_GPIO 0x00000080
+#define FSL_CORENET_DEVDISR_ESPI 0x00000040
+#define FSL_CORENET_DEVDISR_I2C1 0x00000020
+#define FSL_CORENET_DEVDISR_I2C2 0x00000010
+#define FSL_CORENET_DEVDISR_DUART1 0x00000002
+#define FSL_CORENET_DEVDISR_DUART2 0x00000001
+ u8 res7[12];
+ u32 powmgtcsr; /* Power management status & control */
+ u8 res8[12];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res9[8];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u8 res10[8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res11[8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res12[4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res13[4];
+ u8 res14[4];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res15[4];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res16[4];
+ u32 brrl; /* Boot release */
+ u8 res17[24];
+ u32 rcwsr[16]; /* Reset control word status */
+#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
+#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00008000
+#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 15
+#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
+#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
+#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
+ u8 res18[192];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res19[240];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res20[240];
+ u32 scrtsr[8]; /* Core reset status */
+ u8 res21[224];
+ u32 pex1liodnr; /* PCI Express 1 LIODN */
+ u32 pex2liodnr; /* PCI Express 2 LIODN */
+ u32 pex3liodnr; /* PCI Express 3 LIODN */
+ u32 pex4liodnr; /* PCI Express 4 LIODN */
+ u32 rio1liodnr; /* RIO 1 LIODN */
+ u32 rio2liodnr; /* RIO 2 LIODN */
+ u32 rio3liodnr; /* RIO 3 LIODN */
+ u32 rio4liodnr; /* RIO 4 LIODN */
+ u32 usb1liodnr; /* USB 1 LIODN */
+ u32 usb2liodnr; /* USB 2 LIODN */
+ u32 usb3liodnr; /* USB 3 LIODN */
+ u32 usb4liodnr; /* USB 4 LIODN */
+ u32 sdmmc1liodnr; /* SD/MMC 1 LIODN */
+ u32 sdmmc2liodnr; /* SD/MMC 2 LIODN */
+ u32 sdmmc3liodnr; /* SD/MMC 3 LIODN */
+ u32 sdmmc4liodnr; /* SD/MMC 4 LIODN */
+ u32 rmuliodnr; /* RIO Message Unit LIODN */
+ u32 rduliodnr; /* RIO Doorbell Unit LIODN */
+ u32 rpwuliodnr; /* RIO Port Write Unit LIODN */
+ u8 res22[52];
+ u32 dma1liodnr; /* DMA 1 LIODN */
+ u32 dma2liodnr; /* DMA 2 LIODN */
+ u32 dma3liodnr; /* DMA 3 LIODN */
+ u32 dma4liodnr; /* DMA 4 LIODN */
+ u8 res23[48];
+ u8 res24[64];
+ u32 pblsr; /* Preboot loader status */
+ u32 pamubypenr; /* PAMU bypass enable */
+ u32 dmacr1; /* DMA control */
+ u8 res25[4];
+ u32 gensr1; /* General status */
+ u8 res26[12];
+ u32 gencr1; /* General control */
+ u8 res27[12];
+ u8 res28[4];
+ u32 cgensrl; /* Core general status */
+ u8 res29[8];
+ u8 res30[4];
+ u32 cgencrl; /* Core general control */
+ u8 res31[184];
+ u32 sriopstecr; /* SRIO prescaler timer enable control */
+ u8 res32[2300];
+} ccsr_gur_t;
+
+typedef struct ccsr_clk {
+ u32 clkc0csr; /* Core 0 Clock control/status */
+ u8 res1[0x1c];
+ u32 clkc1csr; /* Core 1 Clock control/status */
+ u8 res2[0x1c];
+ u32 clkc2csr; /* Core 2 Clock control/status */
+ u8 res3[0x1c];
+ u32 clkc3csr; /* Core 3 Clock control/status */
+ u8 res4[0x1c];
+ u32 clkc4csr; /* Core 4 Clock control/status */
+ u8 res5[0x1c];
+ u32 clkc5csr; /* Core 5 Clock control/status */
+ u8 res6[0x1c];
+ u32 clkc6csr; /* Core 6 Clock control/status */
+ u8 res7[0x1c];
+ u32 clkc7csr; /* Core 7 Clock control/status */
+ u8 res8[0x71c];
+ u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u8 res10[0x1c];
+ u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u8 res11[0x1c];
+ u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u8 res12[0x1c];
+ u32 pllc4gsr; /* Cluster PLL 4 General Status */
+ u8 res13[0x39c];
+ u32 pllpgsr; /* Platform PLL General Status */
+ u8 res14[0x1c];
+ u32 plldgsr; /* DDR PLL General Status */
+ u8 res15[0x3dc];
+} ccsr_clk_t;
+
+typedef struct ccsr_rcpm {
+ u8 res1[4];
+ u32 cdozsrl; /* Core Doze Status */
+ u8 res2[4];
+ u32 cdozcrl; /* Core Doze Control */
+ u8 res3[4];
+ u32 cnapsrl; /* Core Nap Status */
+ u8 res4[4];
+ u32 cnapcrl; /* Core Nap Control */
+ u8 res5[4];
+ u32 cdozpsrl; /* Core Doze Previous Status */
+ u8 res6[4];
+ u32 cdozpcrl; /* Core Doze Previous Control */
+ u8 res7[4];
+ u32 cwaitsrl; /* Core Wait Status */
+ u8 res8[8];
+ u32 powmgtcsr; /* Power Mangement Control & Status */
+ u8 res9[12];
+ u32 ippdexpcr0; /* IP Powerdown Exception Control 0 */
+ u8 res10[12];
+ u8 res11[4];
+ u32 cpmimrl; /* Core PM IRQ Masking */
+ u8 res12[4];
+ u32 cpmcimrl; /* Core PM Critical IRQ Masking */
+ u8 res13[4];
+ u32 cpmmcimrl; /* Core PM Machine Check IRQ Masking */
+ u8 res14[4];
+ u32 cpmnmimrl; /* Core PM NMI Masking */
+ u8 res15[4];
+ u32 ctbenrl; /* Core Time Base Enable */
+ u8 res16[4];
+ u32 ctbclkselrl; /* Core Time Base Clock Select */
+ u8 res17[4];
+ u32 ctbhltcrl; /* Core Time Base Halt Control */
+ u8 res18[0xf68];
+} ccsr_rcpm_t;
+
+#else
+typedef struct ccsr_gur {
+ u32 porpllsr; /* POR PLL ratio status */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 9
+#endif
+#define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000
+#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25
+#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e
+#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
+ u32 porbmsr; /* POR boot mode status */
+#define MPC85xx_PORBMSR_HA 0x00070000
+#define MPC85xx_PORBMSR_HA_SHIFT 16
+ u32 porimpscr; /* POR I/O impedance status & control */
+ u32 pordevsr; /* POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
+#define MPC85xx_PORDEVSR_PCI1 0x00800000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
+ u32 pordbgmsr; /* POR debug mode status */
+ u32 pordevsr2; /* POR I/O device status 2 */
+/* The 8544 RM says this is bit 26, but it's really bit 24 */
+#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
+ u8 res1[8];
+ u32 gpporcr; /* General-purpose POR configuration */
+ u8 res2[12];
+ u32 gpiocr; /* GPIO control */
+ u8 res3[12];
+#if defined(CONFIG_MPC8569)
+ u32 plppar1; /* Platform port pin assignment 1 */
+ u32 plppar2; /* Platform port pin assignment 2 */
+ u32 plpdir1; /* Platform port pin direction 1 */
+ u32 plpdir2; /* Platform port pin direction 2 */
+#else
+ u32 gpoutdr; /* General-purpose output data */
+ u8 res4[12];
+#endif
+ u32 gpindr; /* General-purpose input data */
+ u8 res5[12];
+ u32 pmuxcr; /* Alt. function signal multiplex control */
+#define MPC85xx_PMUXCR_SD_DATA 0x80000000
+#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
+#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
+ u8 res6[12];
+ u32 devdisr; /* Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
+#define MPC85xx_DEVDISR_CPU1 0x00002000
+#define MPC85xx_DEVDISR_TB1 0x00001000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
+ u8 res7[12];
+ u32 powmgtcsr; /* Power management status & control */
+ u8 res8[12];
+ u32 mcpsumr; /* Machine check summary */
+ u8 res9[12];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u8 res10a[8];
+ u32 rstcr; /* Reset control */
+#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
+ u8 res10b[76];
+ par_io_t qe_par_io[7];
+ u8 res10c[3136];
+#else
+ u8 res10b[3404];
+#endif
+ u32 clkocr; /* Clock out select */
+ u8 res11[12];
+ u32 ddrdllcr; /* DDR DLL control */
+ u8 res12[12];
+ u32 lbcdllcr; /* LBC DLL control */
+ u8 res13[248];
+ u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
+ u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
+ u32 ddrioovcr; /* DDR IO Override Control */
+ u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
+ u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
+ u8 res15[61648];
+} ccsr_gur_t;
+#endif
+
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+ u32 pllcr0; /* PLL Control Register 0 */
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res[5];
+ } bank[3];
+ u32 res1[12];
+ u32 srdstcalcr; /* TX Calibration Control */
+ u32 res2[3];
+ u32 srdsrcalcr; /* RX Calibration Control */
+ u32 res3[3];
+ u32 srdsgr0; /* General Register 0 */
+ u32 res4[11];
+ u32 srdspccr0; /* Protocol Converter Config 0 */
+ u32 srdspccr1; /* Protocol Converter Config 1 */
+ u32 srdspccr2; /* Protocol Converter Config 2 */
+#define SRDS_PCCR2_RST_XGMII1 0x00800000
+#define SRDS_PCCR2_RST_XGMII2 0x00400000
+ u32 res5[197];
+ struct {
+ u32 gcr0; /* General Control Register 0 */
+#define SRDS_GCR0_RRST 0x00400000
+#define SRDS_GCR0_1STLANE 0x00010000
+ u32 gcr1; /* General Control Register 1 */
+#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
+#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
+#define SRDS_GCR1_REIDL_CTL_SRIO 0x00000000
+#define SRDS_GCR1_REIDL_CTL_SGMII 0x00040000
+#define SRDS_GCR1_OPAD_CTL 0x04000000
+ u32 res1[4];
+ u32 tecr0; /* TX Equalization Control Reg 0 */
+#define SRDS_TECR0_TEQ_TYPE_MASK 0x30000000
+#define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000
+ u32 res3;
+ u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */
+ u32 res4[7];
+ } lane[24];
+ u32 res6[384];
+} serdes_corenet_t;
+
+enum {
+ FSL_SRDS_B1_LANE_A = 0,
+ FSL_SRDS_B1_LANE_B = 1,
+ FSL_SRDS_B1_LANE_C = 2,
+ FSL_SRDS_B1_LANE_D = 3,
+ FSL_SRDS_B1_LANE_E = 4,
+ FSL_SRDS_B1_LANE_F = 5,
+ FSL_SRDS_B1_LANE_G = 6,
+ FSL_SRDS_B1_LANE_H = 7,
+ FSL_SRDS_B1_LANE_I = 8,
+ FSL_SRDS_B1_LANE_J = 9,
+ FSL_SRDS_B2_LANE_A = 16,
+ FSL_SRDS_B2_LANE_B = 17,
+ FSL_SRDS_B2_LANE_C = 18,
+ FSL_SRDS_B2_LANE_D = 19,
+ FSL_SRDS_B3_LANE_A = 20,
+ FSL_SRDS_B3_LANE_B = 21,
+ FSL_SRDS_B3_LANE_C = 22,
+ FSL_SRDS_B3_LANE_D = 23,
+};
+
+#ifdef CONFIG_FSL_CORENET
+#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
+#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
+#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
+#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
+#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
+#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
+#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x100000
+#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000
+#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
+#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
+#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000
+#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000
+#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000
+#else
+#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
+#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
+#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000
+#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000
+#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000
+#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000
+#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000
+#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000
+#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000
+#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
+#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#ifdef CONFIG_TSECV2
+#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#else
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#endif
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
+#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
+#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
+#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
+#endif
+
+#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
+#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
+
+#define CONFIG_SYS_FSL_CPC_ADDR \
+ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
+#define CONFIG_SYS_MPC85xx_GUTS_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CCM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CLK_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_ECM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC85xx_LBC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESPI_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
+#define CONFIG_SYS_MPC85xx_GPIO_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
+#define CONFIG_SYS_MPC85xx_L2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
+#define CONFIG_SYS_MPC85xx_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
+#define CONFIG_SYS_MPC85xx_PIC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
+#define CONFIG_SYS_MPC85xx_CPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#endif /*__IMMAP_85xx__*/
--- /dev/null
+/*
+ * MPC86xx Internal Memory Map
+ *
+ * Copyright 2004 Freescale Semiconductor
+ * Jeff Brown (Jeffrey@freescale.com)
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ */
+
+#ifndef __IMMAP_86xx__
+#define __IMMAP_86xx__
+
+#include <asm/types.h>
+#include <asm/fsl_dma.h>
+#include <asm/fsl_i2c.h>
+
+/* Local-Access Registers and MCM Registers(0x0000-0x2000) */
+typedef struct ccsr_local_mcm {
+ uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */
+ char res1[4];
+ uint altcbar; /* 0x8 - Alternate Configuration Base Address Register */
+ char res2[4];
+ uint altcar; /* 0x10 - Alternate Configuration Attribute Register */
+ char res3[12];
+ uint bptr; /* 0x20 - Boot Page Translation Register */
+ char res4[3044];
+ uint lawbar0; /* 0xc08 - Local Access Window 0 Base Address Register */
+ char res5[4];
+ uint lawar0; /* 0xc10 - Local Access Window 0 Attributes Register */
+ char res6[20];
+ uint lawbar1; /* 0xc28 - Local Access Window 1 Base Address Register */
+ char res7[4];
+ uint lawar1; /* 0xc30 - Local Access Window 1 Attributes Register */
+ char res8[20];
+ uint lawbar2; /* 0xc48 - Local Access Window 2 Base Address Register */
+ char res9[4];
+ uint lawar2; /* 0xc50 - Local Access Window 2 Attributes Register */
+ char res10[20];
+ uint lawbar3; /* 0xc68 - Local Access Window 3 Base Address Register */
+ char res11[4];
+ uint lawar3; /* 0xc70 - Local Access Window 3 Attributes Register */
+ char res12[20];
+ uint lawbar4; /* 0xc88 - Local Access Window 4 Base Address Register */
+ char res13[4];
+ uint lawar4; /* 0xc90 - Local Access Window 4 Attributes Register */
+ char res14[20];
+ uint lawbar5; /* 0xca8 - Local Access Window 5 Base Address Register */
+ char res15[4];
+ uint lawar5; /* 0xcb0 - Local Access Window 5 Attributes Register */
+ char res16[20];
+ uint lawbar6; /* 0xcc8 - Local Access Window 6 Base Address Register */
+ char res17[4];
+ uint lawar6; /* 0xcd0 - Local Access Window 6 Attributes Register */
+ char res18[20];
+ uint lawbar7; /* 0xce8 - Local Access Window 7 Base Address Register */
+ char res19[4];
+ uint lawar7; /* 0xcf0 - Local Access Window 7 Attributes Register */
+ char res20[20];
+ uint lawbar8; /* 0xd08 - Local Access Window 8 Base Address Register */
+ char res21[4];
+ uint lawar8; /* 0xd10 - Local Access Window 8 Attributes Register */
+ char res22[20];
+ uint lawbar9; /* 0xd28 - Local Access Window 9 Base Address Register */
+ char res23[4];
+ uint lawar9; /* 0xd30 - Local Access Window 9 Attributes Register */
+ char res24[716];
+ uint abcr; /* 0x1000 - MCM CCB Address Configuration Register */
+ char res25[4];
+ uint dbcr; /* 0x1008 - MCM MPX data bus Configuration Register */
+ char res26[4];
+ uint pcr; /* 0x1010 - MCM CCB Port Configuration Register */
+ char res27[44];
+ uint hpmr0; /* 0x1040 - MCM HPM Threshold Count Register 0 */
+ uint hpmr1; /* 0x1044 - MCM HPM Threshold Count Register 1 */
+ uint hpmr2; /* 0x1048 - MCM HPM Threshold Count Register 2 */
+ uint hpmr3; /* 0x104c - MCM HPM Threshold Count Register 3 */
+ char res28[16];
+ uint hpmr4; /* 0x1060 - MCM HPM Threshold Count Register 4 */
+ uint hpmr5; /* 0x1064 - MCM HPM Threshold Count Register 5 */
+ uint hpmccr; /* 0x1068 - MCM HPM Cycle Count Register */
+ char res29[3476];
+ uint edr; /* 0x1e00 - MCM Error Detect Register */
+ char res30[4];
+ uint eer; /* 0x1e08 - MCM Error Enable Register */
+ uint eatr; /* 0x1e0c - MCM Error Attributes Capture Register */
+ uint eladr; /* 0x1e10 - MCM Error Low Address Capture Register */
+ uint ehadr; /* 0x1e14 - MCM Error High Address Capture Register */
+ char res31[488];
+} ccsr_local_mcm_t;
+
+/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */
+
+typedef struct ccsr_ddr {
+ uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */
+ char res1[4];
+ uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */
+ char res2[4];
+ uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */
+ char res3[4];
+ uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */
+ char res4[4];
+ uint cs4_bnds; /* 0x2020 - DDR Chip Select 4 Memory Bounds */
+ char res5[4];
+ uint cs5_bnds; /* 0x2028 - DDR Chip Select 5 Memory Bounds */
+ char res6[84];
+ uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */
+ uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */
+ uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */
+ uint cs3_config; /* 0x208c - DDR Chip Select Configuration */
+ uint cs4_config; /* 0x2090 - DDR Chip Select Configuration */
+ uint cs5_config; /* 0x2094 - DDR Chip Select Configuration */
+ char res7[104];
+ uint timing_cfg_3; /* 0x2100 - DDR SDRAM Timing Configuration Register 3 */
+ uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
+ uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
+ uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */
+ uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration 1 */
+ uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */
+ uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration 1 */
+ uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */
+ uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */
+ uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */
+ uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */
+ char res8[4];
+ uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */
+ char res9[12];
+ uint sdram_ocd_cntl; /* 0x2140 - DDR SDRAM OCD Control */
+ uint sdram_ocd_status; /* 0x2144 - DDR SDRAM OCD Status */
+ uint init_addr; /* 0x2148 - DDR training initialzation address */
+ uint init_ext_addr; /* 0x214C - DDR training initialzation extended address */
+ char res10[2728];
+ uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */
+ uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */
+ char res11[512];
+ uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
+ uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
+ uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
+ char res12[20];
+ uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */
+ uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */
+ uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */
+ char res13[20];
+ uint err_detect; /* 0x2e40 - DDR Memory Error Detect */
+ uint err_disable; /* 0x2e44 - DDR Memory Error Disable */
+ uint err_int_en; /* 0x2e48 - DDR Memory Error Interrupt Enable */
+ uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */
+ uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */
+ uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */
+ uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */
+ char res14[164];
+ uint debug_1; /* 0x2f00 */
+ uint debug_2;
+ uint debug_3;
+ uint debug_4;
+ uint debug_5;
+ char res15[236];
+} ccsr_ddr_t;
+
+
+/* Daul I2C Registers(0x3000-0x4000) */
+typedef struct ccsr_i2c {
+ struct fsl_i2c i2c[2];
+ u8 res[4096 - 2 * sizeof(struct fsl_i2c)];
+} ccsr_i2c_t;
+
+/* DUART Registers(0x4000-0x5000) */
+typedef struct ccsr_duart {
+ char res1[1280];
+ u_char urbr1_uthr1_udlb1;/* 0x4500 - URBR1, UTHR1, UDLB1 with the same address offset of 0x04500 */
+ u_char uier1_udmb1; /* 0x4501 - UIER1, UDMB1 with the same address offset of 0x04501 */
+ u_char uiir1_ufcr1_uafr1;/* 0x4502 - UIIR1, UFCR1, UAFR1 with the same address offset of 0x04502 */
+ u_char ulcr1; /* 0x4503 - UART1 Line Control Register */
+ u_char umcr1; /* 0x4504 - UART1 Modem Control Register */
+ u_char ulsr1; /* 0x4505 - UART1 Line Status Register */
+ u_char umsr1; /* 0x4506 - UART1 Modem Status Register */
+ u_char uscr1; /* 0x4507 - UART1 Scratch Register */
+ char res2[8];
+ u_char udsr1; /* 0x4510 - UART1 DMA Status Register */
+ char res3[239];
+ u_char urbr2_uthr2_udlb2;/* 0x4600 - URBR2, UTHR2, UDLB2 with the same address offset of 0x04600 */
+ u_char uier2_udmb2; /* 0x4601 - UIER2, UDMB2 with the same address offset of 0x04601 */
+ u_char uiir2_ufcr2_uafr2;/* 0x4602 - UIIR2, UFCR2, UAFR2 with the same address offset of 0x04602 */
+ u_char ulcr2; /* 0x4603 - UART2 Line Control Register */
+ u_char umcr2; /* 0x4604 - UART2 Modem Control Register */
+ u_char ulsr2; /* 0x4605 - UART2 Line Status Register */
+ u_char umsr2; /* 0x4606 - UART2 Modem Status Register */
+ u_char uscr2; /* 0x4607 - UART2 Scratch Register */
+ char res4[8];
+ u_char udsr2; /* 0x4610 - UART2 DMA Status Register */
+ char res5[2543];
+} ccsr_duart_t;
+
+
+/* Local Bus Controller Registers(0x5000-0x6000) */
+typedef struct ccsr_lbc {
+ uint br0; /* 0x5000 - LBC Base Register 0 */
+ uint or0; /* 0x5004 - LBC Options Register 0 */
+ uint br1; /* 0x5008 - LBC Base Register 1 */
+ uint or1; /* 0x500c - LBC Options Register 1 */
+ uint br2; /* 0x5010 - LBC Base Register 2 */
+ uint or2; /* 0x5014 - LBC Options Register 2 */
+ uint br3; /* 0x5018 - LBC Base Register 3 */
+ uint or3; /* 0x501c - LBC Options Register 3 */
+ uint br4; /* 0x5020 - LBC Base Register 4 */
+ uint or4; /* 0x5024 - LBC Options Register 4 */
+ uint br5; /* 0x5028 - LBC Base Register 5 */
+ uint or5; /* 0x502c - LBC Options Register 5 */
+ uint br6; /* 0x5030 - LBC Base Register 6 */
+ uint or6; /* 0x5034 - LBC Options Register 6 */
+ uint br7; /* 0x5038 - LBC Base Register 7 */
+ uint or7; /* 0x503c - LBC Options Register 7 */
+ char res1[40];
+ uint mar; /* 0x5068 - LBC UPM Address Register */
+ char res2[4];
+ uint mamr; /* 0x5070 - LBC UPMA Mode Register */
+ uint mbmr; /* 0x5074 - LBC UPMB Mode Register */
+ uint mcmr; /* 0x5078 - LBC UPMC Mode Register */
+ char res3[8];
+ uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
+ uint mdr; /* 0x5088 - LBC UPM Data Register */
+ char res4[8];
+ uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */
+ char res5[8];
+ uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */
+ uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */
+ char res6[8];
+ uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */
+ uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */
+ uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */
+ uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */
+ uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */
+ char res7[12];
+ uint lbcr; /* 0x50d0 - LBC Configuration Register */
+ uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */
+ char res8[3880];
+} ccsr_lbc_t;
+
+/* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
+typedef struct ccsr_pex {
+ uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */
+ uint cfg_data; /* 0x8004 - PEX Configuration Data Register */
+ char res1[4];
+ uint out_comp_to; /* 0x800C - PEX Outbound Completion Timeout Register */
+ char res2[16];
+ uint pme_msg_det; /* 0x8020 - PEX PME & message detect register */
+ uint pme_msg_int_en; /* 0x8024 - PEX PME & message interrupt enable register */
+ uint pme_msg_dis; /* 0x8028 - PEX PME & message disable register */
+ uint pm_command; /* 0x802c - PEX PM Command register */
+ char res3[3016];
+ uint block_rev1; /* 0x8bf8 - PEX Block Revision register 1 */
+ uint block_rev2; /* 0x8bfc - PEX Block Revision register 2 */
+ uint potar0; /* 0x8c00 - PEX Outbound Transaction Address Register 0 */
+ uint potear0; /* 0x8c04 - PEX Outbound Translation Extended Address Register 0 */
+ char res4[8];
+ uint powar0; /* 0x8c10 - PEX Outbound Window Attributes Register 0 */
+ char res5[12];
+ uint potar1; /* 0x8c20 - PEX Outbound Transaction Address Register 1 */
+ uint potear1; /* 0x8c24 - PEX Outbound Translation Extended Address Register 1 */
+ uint powbar1; /* 0x8c28 - PEX Outbound Window Base Address Register 1 */
+ char res6[4];
+ uint powar1; /* 0x8c30 - PEX Outbound Window Attributes Register 1 */
+ char res7[12];
+ uint potar2; /* 0x8c40 - PEX Outbound Transaction Address Register 2 */
+ uint potear2; /* 0x8c44 - PEX Outbound Translation Extended Address Register 2 */
+ uint powbar2; /* 0x8c48 - PEX Outbound Window Base Address Register 2 */
+ char res8[4];
+ uint powar2; /* 0x8c50 - PEX Outbound Window Attributes Register 2 */
+ char res9[12];
+ uint potar3; /* 0x8c60 - PEX Outbound Transaction Address Register 3 */
+ uint potear3; /* 0x8c64 - PEX Outbound Translation Extended Address Register 3 */
+ uint powbar3; /* 0x8c68 - PEX Outbound Window Base Address Register 3 */
+ char res10[4];
+ uint powar3; /* 0x8c70 - PEX Outbound Window Attributes Register 3 */
+ char res11[12];
+ uint potar4; /* 0x8c80 - PEX Outbound Transaction Address Register 4 */
+ uint potear4; /* 0x8c84 - PEX Outbound Translation Extended Address Register 4 */
+ uint powbar4; /* 0x8c88 - PEX Outbound Window Base Address Register 4 */
+ char res12[4];
+ uint powar4; /* 0x8c90 - PEX Outbound Window Attributes Register 4 */
+ char res13[12];
+ char res14[256];
+ uint pitar3; /* 0x8da0 - PEX Inbound Translation Address Register 3 */
+ char res15[4];
+ uint piwbar3; /* 0x8da8 - PEX Inbound Window Base Address Register 3 */
+ uint piwbear3; /* 0x8dac - PEX Inbound Window Base Extended Address Register 3 */
+ uint piwar3; /* 0x8db0 - PEX Inbound Window Attributes Register 3 */
+ char res16[12];
+ uint pitar2; /* 0x8dc0 - PEX Inbound Translation Address Register 2 */
+ char res17[4];
+ uint piwbar2; /* 0x8dc8 - PEX Inbound Window Base Address Register 2 */
+ uint piwbear2; /* 0x8dcc - PEX Inbound Window Base Extended Address Register 2 */
+ uint piwar2; /* 0x8dd0 - PEX Inbound Window Attributes Register 2 */
+ char res18[12];
+ uint pitar1; /* 0x8de0 - PEX Inbound Translation Address Register 1 */
+ char res19[4];
+ uint piwbar1; /* 0x8de8 - PEX Inbound Window Base Address Register 1 */
+ uint piwbear1;
+ uint piwar1; /* 0x8df0 - PEX Inbound Window Attributes Register 1 */
+ char res20[12];
+ uint pedr; /* 0x8e00 - PEX Error Detect Register */
+ char res21[4];
+ uint peer; /* 0x8e08 - PEX Error Interrupt Enable Register */
+ char res22[4];
+ uint pecdr; /* 0x8e10 - PEX Error Disable Register */
+ char res23[12];
+ uint peer_stat; /* 0x8e20 - PEX Error Capture Status Register */
+ char res24[4];
+ uint perr_cap0; /* 0x8e28 - PEX Error Capture Register 0 */
+ uint perr_cap1; /* 0x8e2c - PEX Error Capture Register 1 */
+ uint perr_cap2; /* 0x8e30 - PEX Error Capture Register 2 */
+ uint perr_cap3; /* 0x8e34 - PEX Error Capture Register 3 */
+ char res25[452];
+ char res26[4];
+} ccsr_pex_t;
+
+/* Hyper Transport Register Block (0xA000-0xB000) */
+typedef struct ccsr_ht {
+ uint hcfg_addr; /* 0xa000 - HT Configuration Address register */
+ uint hcfg_data; /* 0xa004 - HT Configuration Data register */
+ char res1[3064];
+ uint howtar0; /* 0xac00 - HT Outbound Window 0 Translation register */
+ char res2[12];
+ uint howar0; /* 0xac10 - HT Outbound Window 0 Attributes register */
+ char res3[12];
+ uint howtar1; /* 0xac20 - HT Outbound Window 1 Translation register */
+ char res4[4];
+ uint howbar1; /* 0xac28 - HT Outbound Window 1 Base Address register */
+ char res5[4];
+ uint howar1; /* 0xac30 - HT Outbound Window 1 Attributes register */
+ char res6[12];
+ uint howtar2; /* 0xac40 - HT Outbound Window 2 Translation register */
+ char res7[4];
+ uint howbar2; /* 0xac48 - HT Outbound Window 2 Base Address register */
+ char res8[4];
+ uint howar2; /* 0xac50 - HT Outbound Window 2 Attributes register */
+ char res9[12];
+ uint howtar3; /* 0xac60 - HT Outbound Window 3 Translation register */
+ char res10[4];
+ uint howbar3; /* 0xac68 - HT Outbound Window 3 Base Address register */
+ char res11[4];
+ uint howar3; /* 0xac70 - HT Outbound Window 3 Attributes register */
+ char res12[12];
+ uint howtar4; /* 0xac80 - HT Outbound Window 4 Translation register */
+ char res13[4];
+ uint howbar4; /* 0xac88 - HT Outbound Window 4 Base Address register */
+ char res14[4];
+ uint howar4; /* 0xac90 - HT Outbound Window 4 Attributes register */
+ char res15[236];
+ uint hiwtar4; /* 0xad80 - HT Inbound Window 4 Translation register */
+ char res16[4];
+ uint hiwbar4; /* 0xad88 - HT Inbound Window 4 Base Address register */
+ char res17[4];
+ uint hiwar4; /* 0xad90 - HT Inbound Window 4 Attributes register */
+ char res18[12];
+ uint hiwtar3; /* 0xada0 - HT Inbound Window 3 Translation register */
+ char res19[4];
+ uint hiwbar3; /* 0xada8 - HT Inbound Window 3 Base Address register */
+ char res20[4];
+ uint hiwar3; /* 0xadb0 - HT Inbound Window 3 Attributes register */
+ char res21[12];
+ uint hiwtar2; /* 0xadc0 - HT Inbound Window 2 Translation register */
+ char res22[4];
+ uint hiwbar2; /* 0xadc8 - HT Inbound Window 2 Base Address register */
+ char res23[4];
+ uint hiwar2; /* 0xadd0 - HT Inbound Window 2 Attributes register */
+ char res24[12];
+ uint hiwtar1; /* 0xade0 - HT Inbound Window 1 Translation register */
+ char res25[4];
+ uint hiwbar1; /* 0xade8 - HT Inbound Window 1 Base Address register */
+ char res26[4];
+ uint hiwar1; /* 0xadf0 - HT Inbound Window 1 Attributes register */
+ char res27[12];
+ uint hedr; /* 0xae00 - HT Error Detect register */
+ char res28[4];
+ uint heier; /* 0xae08 - HT Error Interrupt Enable register */
+ char res29[4];
+ uint hecdr; /* 0xae10 - HT Error Capture Disbale register */
+ char res30[12];
+ uint hecsr; /* 0xae20 - HT Error Capture Status register */
+ char res31[4];
+ uint hec0; /* 0xae28 - HT Error Capture 0 register */
+ uint hec1; /* 0xae2c - HT Error Capture 1 register */
+ uint hec2; /* 0xae30 - HT Error Capture 2 register */
+ char res32[460];
+} ccsr_ht_t;
+
+/* DMA Registers(0x2_1000-0x2_2000) */
+typedef struct ccsr_dma {
+ char res1[256];
+ struct fsl_dma dma[4];
+ uint dgsr; /* 0x21300 - DMA General Status Register */
+ char res2[3324];
+} ccsr_dma_t;
+
+/* tsec1-4: 24000-28000 */
+typedef struct ccsr_tsec {
+ uint id; /* 0x24000 - Controller ID Register */
+ char res1[12];
+ uint ievent; /* 0x24010 - Interrupt Event Register */
+ uint imask; /* 0x24014 - Interrupt Mask Register */
+ uint edis; /* 0x24018 - Error Disabled Register */
+ char res2[4];
+ uint ecntrl; /* 0x24020 - Ethernet Control Register */
+ char res2_1[4];
+ uint ptv; /* 0x24028 - Pause Time Value Register */
+ uint dmactrl; /* 0x2402c - DMA Control Register */
+ uint tbipa; /* 0x24030 - TBI PHY Address Register */
+ char res3[88];
+ uint fifo_tx_thr; /* 0x2408c - FIFO transmit threshold register */
+ char res4[8];
+ uint fifo_tx_starve; /* 0x24098 - FIFO transmit starve register */
+ uint fifo_tx_starve_shutoff;/* 0x2409c - FIFO transmit starve shutoff register */
+ char res4_1[4];
+ uint fifo_rx_pause; /* 0x240a4 - FIFO receive pause threshold register */
+ uint fifo_rx_alarm; /* 0x240a8 - FIFO receive alarm threshold register */
+ char res5[84];
+ uint tctrl; /* 0x24100 - Transmit Control Register */
+ uint tstat; /* 0x24104 - Transmit Status Register */
+ uint dfvlan; /* 0x24108 - Default VLAN control word */
+ char res6[4];
+ uint txic; /* 0x24110 - Transmit interrupt coalescing Register */
+ uint tqueue; /* 0x24114 - Transmit Queue Control Register */
+ char res7[40];
+ uint tr03wt; /* 0x24140 - TxBD Rings 0-3 round-robin weightings */
+ uint tw47wt; /* 0x24144 - TxBD Rings 4-7 round-robin weightings */
+ char res8[52];
+ uint tbdbph; /* 0x2417c - Transmit Data Buffer Pointer High Register */
+ char res9[4];
+ uint tbptr0; /* 0x24184 - Transmit Buffer Descriptor Pointer for Ring 0 */
+ char res10[4];
+ uint tbptr1; /* 0x2418C - Transmit Buffer Descriptor Pointer for Ring 1 */
+ char res11[4];
+ uint tbptr2; /* 0x24194 - Transmit Buffer Descriptor Pointer for Ring 2 */
+ char res12[4];
+ uint tbptr3; /* 0x2419C - Transmit Buffer Descriptor Pointer for Ring 3 */
+ char res13[4];
+ uint tbptr4; /* 0x241A4 - Transmit Buffer Descriptor Pointer for Ring 4 */
+ char res14[4];
+ uint tbptr5; /* 0x241AC - Transmit Buffer Descriptor Pointer for Ring 5 */
+ char res15[4];
+ uint tbptr6; /* 0x241B4 - Transmit Buffer Descriptor Pointer for Ring 6 */
+ char res16[4];
+ uint tbptr7; /* 0x241BC - Transmit Buffer Descriptor Pointer for Ring 7 */
+ char res17[64];
+ uint tbaseh; /* 0x24200 - Transmit Descriptor Base Address High Register */
+ uint tbase0; /* 0x24204 - Transmit Descriptor Base Address Register of Ring 0 */
+ char res18[4];
+ uint tbase1; /* 0x2420C - Transmit Descriptor base address of Ring 1 */
+ char res19[4];
+ uint tbase2; /* 0x24214 - Transmit Descriptor base address of Ring 2 */
+ char res20[4];
+ uint tbase3; /* 0x2421C - Transmit Descriptor base address of Ring 3 */
+ char res21[4];
+ uint tbase4; /* 0x24224 - Transmit Descriptor base address of Ring 4 */
+ char res22[4];
+ uint tbase5; /* 0x2422C - Transmit Descriptor base address of Ring 5 */
+ char res23[4];
+ uint tbase6; /* 0x24234 - Transmit Descriptor base address of Ring 6 */
+ char res24[4];
+ uint tbase7; /* 0x2423C - Transmit Descriptor base address of Ring 7 */
+ char res25[192];
+ uint rctrl; /* 0x24300 - Receive Control Register */
+ uint rstat; /* 0x24304 - Receive Status Register */
+ char res26[8];
+ uint rxic; /* 0x24310 - Receive Interrupt Coalecing Register */
+ uint rqueue; /* 0x24314 - Receive queue control register */
+ char res27[24];
+ uint rbifx; /* 0x24330 - Receive bit field extract control Register */
+ uint rqfar; /* 0x24334 - Receive queue filing table address Register */
+ uint rqfcr; /* 0x24338 - Receive queue filing table control Register */
+ uint rqfpr; /* 0x2433c - Receive queue filing table property Register */
+ uint mrblr; /* 0x24340 - Maximum Receive Buffer Length Register */
+ char res28[56];
+ uint rbdbph; /* 0x2437C - Receive Data Buffer Pointer High */
+ char res29[4];
+ uint rbptr0; /* 0x24384 - Receive Buffer Descriptor Pointer for Ring 0 */
+ char res30[4];
+ uint rbptr1; /* 0x2438C - Receive Buffer Descriptor Pointer for Ring 1 */
+ char res31[4];
+ uint rbptr2; /* 0x24394 - Receive Buffer Descriptor Pointer for Ring 2 */
+ char res32[4];
+ uint rbptr3; /* 0x2439C - Receive Buffer Descriptor Pointer for Ring 3 */
+ char res33[4];
+ uint rbptr4; /* 0x243A4 - Receive Buffer Descriptor Pointer for Ring 4 */
+ char res34[4];
+ uint rbptr5; /* 0x243AC - Receive Buffer Descriptor Pointer for Ring 5 */
+ char res35[4];
+ uint rbptr6; /* 0x243B4 - Receive Buffer Descriptor Pointer for Ring 6 */
+ char res36[4];
+ uint rbptr7; /* 0x243BC - Receive Buffer Descriptor Pointer for Ring 7 */
+ char res37[64];
+ uint rbaseh; /* 0x24400 - Receive Descriptor Base Address High 0 */
+ uint rbase0; /* 0x24404 - Receive Descriptor Base Address of Ring 0 */
+ char res38[4];
+ uint rbase1; /* 0x2440C - Receive Descriptor Base Address of Ring 1 */
+ char res39[4];
+ uint rbase2; /* 0x24414 - Receive Descriptor Base Address of Ring 2 */
+ char res40[4];
+ uint rbase3; /* 0x2441C - Receive Descriptor Base Address of Ring 3 */
+ char res41[4];
+ uint rbase4; /* 0x24424 - Receive Descriptor Base Address of Ring 4 */
+ char res42[4];
+ uint rbase5; /* 0x2442C - Receive Descriptor Base Address of Ring 5 */
+ char res43[4];
+ uint rbase6; /* 0x24434 - Receive Descriptor Base Address of Ring 6 */
+ char res44[4];
+ uint rbase7; /* 0x2443C - Receive Descriptor Base Address of Ring 7 */
+ char res45[192];
+ uint maccfg1; /* 0x24500 - MAC Configuration 1 Register */
+ uint maccfg2; /* 0x24504 - MAC Configuration 2 Register */
+ uint ipgifg; /* 0x24508 - Inter Packet Gap/Inter Frame Gap Register */
+ uint hafdup; /* 0x2450c - Half Duplex Register */
+ uint maxfrm; /* 0x24510 - Maximum Frame Length Register */
+ char res46[12];
+ uint miimcfg; /* 0x24520 - MII Management Configuration Register */
+ uint miimcom; /* 0x24524 - MII Management Command Register */
+ uint miimadd; /* 0x24528 - MII Management Address Register */
+ uint miimcon; /* 0x2452c - MII Management Control Register */
+ uint miimstat; /* 0x24530 - MII Management Status Register */
+ uint miimind; /* 0x24534 - MII Management Indicator Register */
+ uint ifctrl; /* 0x24538 - Interface Contrl Register */
+ uint ifstat; /* 0x2453c - Interface Status Register */
+ uint macstnaddr1; /* 0x24540 - Station Address Part 1 Register */
+ uint macstnaddr2; /* 0x24544 - Station Address Part 2 Register */
+ uint mac01addr1; /* 0x24548 - MAC exact match address 1, part 1 */
+ uint mac01addr2; /* 0x2454C - MAC exact match address 1, part 2 */
+ uint mac02addr1; /* 0x24550 - MAC exact match address 2, part 1 */
+ uint mac02addr2; /* 0x24554 - MAC exact match address 2, part 2 */
+ uint mac03addr1; /* 0x24558 - MAC exact match address 3, part 1 */
+ uint mac03addr2; /* 0x2455C - MAC exact match address 3, part 2 */
+ uint mac04addr1; /* 0x24560 - MAC exact match address 4, part 1 */
+ uint mac04addr2; /* 0x24564 - MAC exact match address 4, part 2 */
+ uint mac05addr1; /* 0x24568 - MAC exact match address 5, part 1 */
+ uint mac05addr2; /* 0x2456C - MAC exact match address 5, part 2 */
+ uint mac06addr1; /* 0x24570 - MAC exact match address 6, part 1 */
+ uint mac06addr2; /* 0x24574 - MAC exact match address 6, part 2 */
+ uint mac07addr1; /* 0x24578 - MAC exact match address 7, part 1 */
+ uint mac07addr2; /* 0x2457C - MAC exact match address 7, part 2 */
+ uint mac08addr1; /* 0x24580 - MAC exact match address 8, part 1 */
+ uint mac08addr2; /* 0x24584 - MAC exact match address 8, part 2 */
+ uint mac09addr1; /* 0x24588 - MAC exact match address 9, part 1 */
+ uint mac09addr2; /* 0x2458C - MAC exact match address 9, part 2 */
+ uint mac10addr1; /* 0x24590 - MAC exact match address 10, part 1 */
+ uint mac10addr2; /* 0x24594 - MAC exact match address 10, part 2 */
+ uint mac11addr1; /* 0x24598 - MAC exact match address 11, part 1 */
+ uint mac11addr2; /* 0x2459C - MAC exact match address 11, part 2 */
+ uint mac12addr1; /* 0x245A0 - MAC exact match address 12, part 1 */
+ uint mac12addr2; /* 0x245A4 - MAC exact match address 12, part 2 */
+ uint mac13addr1; /* 0x245A8 - MAC exact match address 13, part 1 */
+ uint mac13addr2; /* 0x245AC - MAC exact match address 13, part 2 */
+ uint mac14addr1; /* 0x245B0 - MAC exact match address 14, part 1 */
+ uint mac14addr2; /* 0x245B4 - MAC exact match address 14, part 2 */
+ uint mac15addr1; /* 0x245B8 - MAC exact match address 15, part 1 */
+ uint mac15addr2; /* 0x245BC - MAC exact match address 15, part 2 */
+ char res48[192];
+ uint tr64; /* 0x24680 - Transmit and Receive 64-byte Frame Counter */
+ uint tr127; /* 0x24684 - Transmit and Receive 65-127 byte Frame Counter */
+ uint tr255; /* 0x24688 - Transmit and Receive 128-255 byte Frame Counter */
+ uint tr511; /* 0x2468c - Transmit and Receive 256-511 byte Frame Counter */
+ uint tr1k; /* 0x24690 - Transmit and Receive 512-1023 byte Frame Counter */
+ uint trmax; /* 0x24694 - Transmit and Receive 1024-1518 byte Frame Counter */
+ uint trmgv; /* 0x24698 - Transmit and Receive 1519-1522 byte Good VLAN Frame */
+ uint rbyt; /* 0x2469c - Receive Byte Counter */
+ uint rpkt; /* 0x246a0 - Receive Packet Counter */
+ uint rfcs; /* 0x246a4 - Receive FCS Error Counter */
+ uint rmca; /* 0x246a8 - Receive Multicast Packet Counter */
+ uint rbca; /* 0x246ac - Receive Broadcast Packet Counter */
+ uint rxcf; /* 0x246b0 - Receive Control Frame Packet Counter */
+ uint rxpf; /* 0x246b4 - Receive Pause Frame Packet Counter */
+ uint rxuo; /* 0x246b8 - Receive Unknown OP Code Counter */
+ uint raln; /* 0x246bc - Receive Alignment Error Counter */
+ uint rflr; /* 0x246c0 - Receive Frame Length Error Counter */
+ uint rcde; /* 0x246c4 - Receive Code Error Counter */
+ uint rcse; /* 0x246c8 - Receive Carrier Sense Error Counter */
+ uint rund; /* 0x246cc - Receive Undersize Packet Counter */
+ uint rovr; /* 0x246d0 - Receive Oversize Packet Counter */
+ uint rfrg; /* 0x246d4 - Receive Fragments Counter */
+ uint rjbr; /* 0x246d8 - Receive Jabber Counter */
+ uint rdrp; /* 0x246dc - Receive Drop Counter */
+ uint tbyt; /* 0x246e0 - Transmit Byte Counter Counter */
+ uint tpkt; /* 0x246e4 - Transmit Packet Counter */
+ uint tmca; /* 0x246e8 - Transmit Multicast Packet Counter */
+ uint tbca; /* 0x246ec - Transmit Broadcast Packet Counter */
+ uint txpf; /* 0x246f0 - Transmit Pause Control Frame Counter */
+ uint tdfr; /* 0x246f4 - Transmit Deferral Packet Counter */
+ uint tedf; /* 0x246f8 - Transmit Excessive Deferral Packet Counter */
+ uint tscl; /* 0x246fc - Transmit Single Collision Packet Counter */
+ uint tmcl; /* 0x24700 - Transmit Multiple Collision Packet Counter */
+ uint tlcl; /* 0x24704 - Transmit Late Collision Packet Counter */
+ uint txcl; /* 0x24708 - Transmit Excessive Collision Packet Counter */
+ uint tncl; /* 0x2470c - Transmit Total Collision Counter */
+ char res49[4];
+ uint tdrp; /* 0x24714 - Transmit Drop Frame Counter */
+ uint tjbr; /* 0x24718 - Transmit Jabber Frame Counter */
+ uint tfcs; /* 0x2471c - Transmit FCS Error Counter */
+ uint txcf; /* 0x24720 - Transmit Control Frame Counter */
+ uint tovr; /* 0x24724 - Transmit Oversize Frame Counter */
+ uint tund; /* 0x24728 - Transmit Undersize Frame Counter */
+ uint tfrg; /* 0x2472c - Transmit Fragments Frame Counter */
+ uint car1; /* 0x24730 - Carry Register One */
+ uint car2; /* 0x24734 - Carry Register Two */
+ uint cam1; /* 0x24738 - Carry Mask Register One */
+ uint cam2; /* 0x2473c - Carry Mask Register Two */
+ uint rrej; /* 0x24740 - Receive filer rejected packet counter */
+ char res50[188];
+ uint iaddr0; /* 0x24800 - Indivdual address register 0 */
+ uint iaddr1; /* 0x24804 - Indivdual address register 1 */
+ uint iaddr2; /* 0x24808 - Indivdual address register 2 */
+ uint iaddr3; /* 0x2480c - Indivdual address register 3 */
+ uint iaddr4; /* 0x24810 - Indivdual address register 4 */
+ uint iaddr5; /* 0x24814 - Indivdual address register 5 */
+ uint iaddr6; /* 0x24818 - Indivdual address register 6 */
+ uint iaddr7; /* 0x2481c - Indivdual address register 7 */
+ char res51[96];
+ uint gaddr0; /* 0x24880 - Global address register 0 */
+ uint gaddr1; /* 0x24884 - Global address register 1 */
+ uint gaddr2; /* 0x24888 - Global address register 2 */
+ uint gaddr3; /* 0x2488c - Global address register 3 */
+ uint gaddr4; /* 0x24890 - Global address register 4 */
+ uint gaddr5; /* 0x24894 - Global address register 5 */
+ uint gaddr6; /* 0x24898 - Global address register 6 */
+ uint gaddr7; /* 0x2489c - Global address register 7 */
+ char res52[352];
+ uint fifocfg; /* 0x24A00 - FIFO interface configuration register */
+ char res53[500];
+ uint attr; /* 0x24BF8 - DMA Attribute register */
+ uint attreli; /* 0x24BFC - DMA Attribute extract length and index register */
+ char res54[1024];
+} ccsr_tsec_t;
+
+/* PIC Registers(0x4_0000-0x6_1000) */
+
+typedef struct ccsr_pic {
+ char res1[64];
+ uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
+ char res2[12];
+ uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
+ char res3[12];
+ uint ipidr2; /* 0x40060 - Interprocessor Interrupt Dispatch Register 2 */
+ char res4[12];
+ uint ipidr3; /* 0x40070 - Interprocessor Interrupt Dispatch Register 3 */
+ char res5[12];
+ uint ctpr; /* 0x40080 - Current Task Priority Register */
+ char res6[12];
+ uint whoami; /* 0x40090 - Who Am I Register */
+ char res7[12];
+ uint iack; /* 0x400a0 - Interrupt Acknowledge Register */
+ char res8[12];
+ uint eoi; /* 0x400b0 - End Of Interrupt Register */
+ char res9[3916];
+ uint frr; /* 0x41000 - Feature Reporting Register */
+ char res10[28];
+ uint gcr; /* 0x41020 - Global Configuration Register */
+#define MPC86xx_PICGCR_RST 0x80000000
+#define MPC86xx_PICGCR_MODE 0x20000000
+ char res11[92];
+ uint vir; /* 0x41080 - Vendor Identification Register */
+ char res12[12];
+ uint pir; /* 0x41090 - Processor Initialization Register */
+ char res13[12];
+ uint ipivpr0; /* 0x410a0 - IPI Vector/Priority Register 0 */
+ char res14[12];
+ uint ipivpr1; /* 0x410b0 - IPI Vector/Priority Register 1 */
+ char res15[12];
+ uint ipivpr2; /* 0x410c0 - IPI Vector/Priority Register 2 */
+ char res16[12];
+ uint ipivpr3; /* 0x410d0 - IPI Vector/Priority Register 3 */
+ char res17[12];
+ uint svr; /* 0x410e0 - Spurious Vector Register */
+ char res18[12];
+ uint tfrr; /* 0x410f0 - Timer Frequency Reporting Register */
+ char res19[12];
+ uint gtccr0; /* 0x41100 - Global Timer Current Count Register 0 */
+ char res20[12];
+ uint gtbcr0; /* 0x41110 - Global Timer Base Count Register 0 */
+ char res21[12];
+ uint gtvpr0; /* 0x41120 - Global Timer Vector/Priority Register 0 */
+ char res22[12];
+ uint gtdr0; /* 0x41130 - Global Timer Destination Register 0 */
+ char res23[12];
+ uint gtccr1; /* 0x41140 - Global Timer Current Count Register 1 */
+ char res24[12];
+ uint gtbcr1; /* 0x41150 - Global Timer Base Count Register 1 */
+ char res25[12];
+ uint gtvpr1; /* 0x41160 - Global Timer Vector/Priority Register 1 */
+ char res26[12];
+ uint gtdr1; /* 0x41170 - Global Timer Destination Register 1 */
+ char res27[12];
+ uint gtccr2; /* 0x41180 - Global Timer Current Count Register 2 */
+ char res28[12];
+ uint gtbcr2; /* 0x41190 - Global Timer Base Count Register 2 */
+ char res29[12];
+ uint gtvpr2; /* 0x411a0 - Global Timer Vector/Priority Register 2 */
+ char res30[12];
+ uint gtdr2; /* 0x411b0 - Global Timer Destination Register 2 */
+ char res31[12];
+ uint gtccr3; /* 0x411c0 - Global Timer Current Count Register 3 */
+ char res32[12];
+ uint gtbcr3; /* 0x411d0 - Global Timer Base Count Register 3 */
+ char res33[12];
+ uint gtvpr3; /* 0x411e0 - Global Timer Vector/Priority Register 3 */
+ char res34[12];
+ uint gtdr3; /* 0x411f0 - Global Timer Destination Register 3 */
+ char res35[268];
+ uint tcr; /* 0x41300 - Timer Control Register */
+ char res36[12];
+ uint irqsr0; /* 0x41310 - IRQ_OUT Summary Register 0 */
+ char res37[12];
+ uint irqsr1; /* 0x41320 - IRQ_OUT Summary Register 1 */
+ char res38[12];
+ uint cisr0; /* 0x41330 - Critical Interrupt Summary Register 0 */
+ char res39[12];
+ uint cisr1; /* 0x41340 - Critical Interrupt Summary Register 1 */
+ char res40[12];
+ uint pm0mr0; /* 0x41350 - Performance monitor 0 mask register 0 */
+ char res41[12];
+ uint pm0mr1; /* 0x41360 - Performance monitor 0 mask register 1 */
+ char res42[12];
+ uint pm1mr0; /* 0x41370 - Performance monitor 1 mask register 0 */
+ char res43[12];
+ uint pm1mr1; /* 0x41380 - Performance monitor 1 mask register 1 */
+ char res44[12];
+ uint pm2mr0; /* 0x41390 - Performance monitor 2 mask register 0 */
+ char res45[12];
+ uint pm2mr1; /* 0x413A0 - Performance monitor 2 mask register 1 */
+ char res46[12];
+ uint pm3mr0; /* 0x413B0 - Performance monitor 3 mask register 0 */
+ char res47[12];
+ uint pm3mr1; /* 0x413C0 - Performance monitor 3 mask register 1 */
+ char res48[60];
+ uint msgr0; /* 0x41400 - Message Register 0 */
+ char res49[12];
+ uint msgr1; /* 0x41410 - Message Register 1 */
+ char res50[12];
+ uint msgr2; /* 0x41420 - Message Register 2 */
+ char res51[12];
+ uint msgr3; /* 0x41430 - Message Register 3 */
+ char res52[204];
+ uint mer; /* 0x41500 - Message Enable Register */
+ char res53[12];
+ uint msr; /* 0x41510 - Message Status Register */
+ char res54[60140];
+ uint eivpr0; /* 0x50000 - External Interrupt Vector/Priority Register 0 */
+ char res55[12];
+ uint eidr0; /* 0x50010 - External Interrupt Destination Register 0 */
+ char res56[12];
+ uint eivpr1; /* 0x50020 - External Interrupt Vector/Priority Register 1 */
+ char res57[12];
+ uint eidr1; /* 0x50030 - External Interrupt Destination Register 1 */
+ char res58[12];
+ uint eivpr2; /* 0x50040 - External Interrupt Vector/Priority Register 2 */
+ char res59[12];
+ uint eidr2; /* 0x50050 - External Interrupt Destination Register 2 */
+ char res60[12];
+ uint eivpr3; /* 0x50060 - External Interrupt Vector/Priority Register 3 */
+ char res61[12];
+ uint eidr3; /* 0x50070 - External Interrupt Destination Register 3 */
+ char res62[12];
+ uint eivpr4; /* 0x50080 - External Interrupt Vector/Priority Register 4 */
+ char res63[12];
+ uint eidr4; /* 0x50090 - External Interrupt Destination Register 4 */
+ char res64[12];
+ uint eivpr5; /* 0x500a0 - External Interrupt Vector/Priority Register 5 */
+ char res65[12];
+ uint eidr5; /* 0x500b0 - External Interrupt Destination Register 5 */
+ char res66[12];
+ uint eivpr6; /* 0x500c0 - External Interrupt Vector/Priority Register 6 */
+ char res67[12];
+ uint eidr6; /* 0x500d0 - External Interrupt Destination Register 6 */
+ char res68[12];
+ uint eivpr7; /* 0x500e0 - External Interrupt Vector/Priority Register 7 */
+ char res69[12];
+ uint eidr7; /* 0x500f0 - External Interrupt Destination Register 7 */
+ char res70[12];
+ uint eivpr8; /* 0x50100 - External Interrupt Vector/Priority Register 8 */
+ char res71[12];
+ uint eidr8; /* 0x50110 - External Interrupt Destination Register 8 */
+ char res72[12];
+ uint eivpr9; /* 0x50120 - External Interrupt Vector/Priority Register 9 */
+ char res73[12];
+ uint eidr9; /* 0x50130 - External Interrupt Destination Register 9 */
+ char res74[12];
+ uint eivpr10; /* 0x50140 - External Interrupt Vector/Priority Register 10 */
+ char res75[12];
+ uint eidr10; /* 0x50150 - External Interrupt Destination Register 10 */
+ char res76[12];
+ uint eivpr11; /* 0x50160 - External Interrupt Vector/Priority Register 11 */
+ char res77[12];
+ uint eidr11; /* 0x50170 - External Interrupt Destination Register 11 */
+ char res78[140];
+ uint iivpr0; /* 0x50200 - Internal Interrupt Vector/Priority Register 0 */
+ char res79[12];
+ uint iidr0; /* 0x50210 - Internal Interrupt Destination Register 0 */
+ char res80[12];
+ uint iivpr1; /* 0x50220 - Internal Interrupt Vector/Priority Register 1 */
+ char res81[12];
+ uint iidr1; /* 0x50230 - Internal Interrupt Destination Register 1 */
+ char res82[12];
+ uint iivpr2; /* 0x50240 - Internal Interrupt Vector/Priority Register 2 */
+ char res83[12];
+ uint iidr2; /* 0x50250 - Internal Interrupt Destination Register 2 */
+ char res84[12];
+ uint iivpr3; /* 0x50260 - Internal Interrupt Vector/Priority Register 3 */
+ char res85[12];
+ uint iidr3; /* 0x50270 - Internal Interrupt Destination Register 3 */
+ char res86[12];
+ uint iivpr4; /* 0x50280 - Internal Interrupt Vector/Priority Register 4 */
+ char res87[12];
+ uint iidr4; /* 0x50290 - Internal Interrupt Destination Register 4 */
+ char res88[12];
+ uint iivpr5; /* 0x502a0 - Internal Interrupt Vector/Priority Register 5 */
+ char res89[12];
+ uint iidr5; /* 0x502b0 - Internal Interrupt Destination Register 5 */
+ char res90[12];
+ uint iivpr6; /* 0x502c0 - Internal Interrupt Vector/Priority Register 6 */
+ char res91[12];
+ uint iidr6; /* 0x502d0 - Internal Interrupt Destination Register 6 */
+ char res92[12];
+ uint iivpr7; /* 0x502e0 - Internal Interrupt Vector/Priority Register 7 */
+ char res93[12];
+ uint iidr7; /* 0x502f0 - Internal Interrupt Destination Register 7 */
+ char res94[12];
+ uint iivpr8; /* 0x50300 - Internal Interrupt Vector/Priority Register 8 */
+ char res95[12];
+ uint iidr8; /* 0x50310 - Internal Interrupt Destination Register 8 */
+ char res96[12];
+ uint iivpr9; /* 0x50320 - Internal Interrupt Vector/Priority Register 9 */
+ char res97[12];
+ uint iidr9; /* 0x50330 - Internal Interrupt Destination Register 9 */
+ char res98[12];
+ uint iivpr10; /* 0x50340 - Internal Interrupt Vector/Priority Register 10 */
+ char res99[12];
+ uint iidr10; /* 0x50350 - Internal Interrupt Destination Register 10 */
+ char res100[12];
+ uint iivpr11; /* 0x50360 - Internal Interrupt Vector/Priority Register 11 */
+ char res101[12];
+ uint iidr11; /* 0x50370 - Internal Interrupt Destination Register 11 */
+ char res102[12];
+ uint iivpr12; /* 0x50380 - Internal Interrupt Vector/Priority Register 12 */
+ char res103[12];
+ uint iidr12; /* 0x50390 - Internal Interrupt Destination Register 12 */
+ char res104[12];
+ uint iivpr13; /* 0x503a0 - Internal Interrupt Vector/Priority Register 13 */
+ char res105[12];
+ uint iidr13; /* 0x503b0 - Internal Interrupt Destination Register 13 */
+ char res106[12];
+ uint iivpr14; /* 0x503c0 - Internal Interrupt Vector/Priority Register 14 */
+ char res107[12];
+ uint iidr14; /* 0x503d0 - Internal Interrupt Destination Register 14 */
+ char res108[12];
+ uint iivpr15; /* 0x503e0 - Internal Interrupt Vector/Priority Register 15 */
+ char res109[12];
+ uint iidr15; /* 0x503f0 - Internal Interrupt Destination Register 15 */
+ char res110[12];
+ uint iivpr16; /* 0x50400 - Internal Interrupt Vector/Priority Register 16 */
+ char res111[12];
+ uint iidr16; /* 0x50410 - Internal Interrupt Destination Register 16 */
+ char res112[12];
+ uint iivpr17; /* 0x50420 - Internal Interrupt Vector/Priority Register 17 */
+ char res113[12];
+ uint iidr17; /* 0x50430 - Internal Interrupt Destination Register 17 */
+ char res114[12];
+ uint iivpr18; /* 0x50440 - Internal Interrupt Vector/Priority Register 18 */
+ char res115[12];
+ uint iidr18; /* 0x50450 - Internal Interrupt Destination Register 18 */
+ char res116[12];
+ uint iivpr19; /* 0x50460 - Internal Interrupt Vector/Priority Register 19 */
+ char res117[12];
+ uint iidr19; /* 0x50470 - Internal Interrupt Destination Register 19 */
+ char res118[12];
+ uint iivpr20; /* 0x50480 - Internal Interrupt Vector/Priority Register 20 */
+ char res119[12];
+ uint iidr20; /* 0x50490 - Internal Interrupt Destination Register 20 */
+ char res120[12];
+ uint iivpr21; /* 0x504a0 - Internal Interrupt Vector/Priority Register 21 */
+ char res121[12];
+ uint iidr21; /* 0x504b0 - Internal Interrupt Destination Register 21 */
+ char res122[12];
+ uint iivpr22; /* 0x504c0 - Internal Interrupt Vector/Priority Register 22 */
+ char res123[12];
+ uint iidr22; /* 0x504d0 - Internal Interrupt Destination Register 22 */
+ char res124[12];
+ uint iivpr23; /* 0x504e0 - Internal Interrupt Vector/Priority Register 23 */
+ char res125[12];
+ uint iidr23; /* 0x504f0 - Internal Interrupt Destination Register 23 */
+ char res126[12];
+ uint iivpr24; /* 0x50500 - Internal Interrupt Vector/Priority Register 24 */
+ char res127[12];
+ uint iidr24; /* 0x50510 - Internal Interrupt Destination Register 24 */
+ char res128[12];
+ uint iivpr25; /* 0x50520 - Internal Interrupt Vector/Priority Register 25 */
+ char res129[12];
+ uint iidr25; /* 0x50530 - Internal Interrupt Destination Register 25 */
+ char res130[12];
+ uint iivpr26; /* 0x50540 - Internal Interrupt Vector/Priority Register 26 */
+ char res131[12];
+ uint iidr26; /* 0x50550 - Internal Interrupt Destination Register 26 */
+ char res132[12];
+ uint iivpr27; /* 0x50560 - Internal Interrupt Vector/Priority Register 27 */
+ char res133[12];
+ uint iidr27; /* 0x50570 - Internal Interrupt Destination Register 27 */
+ char res134[12];
+ uint iivpr28; /* 0x50580 - Internal Interrupt Vector/Priority Register 28 */
+ char res135[12];
+ uint iidr28; /* 0x50590 - Internal Interrupt Destination Register 28 */
+ char res136[12];
+ uint iivpr29; /* 0x505a0 - Internal Interrupt Vector/Priority Register 29 */
+ char res137[12];
+ uint iidr29; /* 0x505b0 - Internal Interrupt Destination Register 29 */
+ char res138[12];
+ uint iivpr30; /* 0x505c0 - Internal Interrupt Vector/Priority Register 30 */
+ char res139[12];
+ uint iidr30; /* 0x505d0 - Internal Interrupt Destination Register 30 */
+ char res140[12];
+ uint iivpr31; /* 0x505e0 - Internal Interrupt Vector/Priority Register 31 */
+ char res141[12];
+ uint iidr31; /* 0x505f0 - Internal Interrupt Destination Register 31 */
+ char res142[4108];
+ uint mivpr0; /* 0x51600 - Messaging Interrupt Vector/Priority Register 0 */
+ char res143[12];
+ uint midr0; /* 0x51610 - Messaging Interrupt Destination Register 0 */
+ char res144[12];
+ uint mivpr1; /* 0x51620 - Messaging Interrupt Vector/Priority Register 1 */
+ char res145[12];
+ uint midr1; /* 0x51630 - Messaging Interrupt Destination Register 1 */
+ char res146[12];
+ uint mivpr2; /* 0x51640 - Messaging Interrupt Vector/Priority Register 2 */
+ char res147[12];
+ uint midr2; /* 0x51650 - Messaging Interrupt Destination Register 2 */
+ char res148[12];
+ uint mivpr3; /* 0x51660 - Messaging Interrupt Vector/Priority Register 3 */
+ char res149[12];
+ uint midr3; /* 0x51670 - Messaging Interrupt Destination Register 3 */
+ char res150[59852];
+ uint ipi0dr0; /* 0x60040 - Processor 0 Interprocessor Interrupt Dispatch Register 0 */
+ char res151[12];
+ uint ipi0dr1; /* 0x60050 - Processor 0 Interprocessor Interrupt Dispatch Register 1 */
+ char res152[12];
+ uint ipi0dr2; /* 0x60060 - Processor 0 Interprocessor Interrupt Dispatch Register 2 */
+ char res153[12];
+ uint ipi0dr3; /* 0x60070 - Processor 0 Interprocessor Interrupt Dispatch Register 3 */
+ char res154[12];
+ uint ctpr0; /* 0x60080 - Current Task Priority Register for Processor 0 */
+ char res155[12];
+ uint whoami0; /* 0x60090 - Who Am I Register for Processor 0 */
+ char res156[12];
+ uint iack0; /* 0x600a0 - Interrupt Acknowledge Register for Processor 0 */
+ char res157[12];
+ uint eoi0; /* 0x600b0 - End Of Interrupt Register for Processor 0 */
+ char res158[3916];
+} ccsr_pic_t;
+
+/* RapidIO Registers(0xc_0000-0xe_0000) */
+
+typedef struct ccsr_rio {
+ uint didcar; /* 0xc0000 - Device Identity Capability Register */
+ uint dicar; /* 0xc0004 - Device Information Capability Register */
+ uint aidcar; /* 0xc0008 - Assembly Identity Capability Register */
+ uint aicar; /* 0xc000c - Assembly Information Capability Register */
+ uint pefcar; /* 0xc0010 - Processing Element Features Capability Register */
+ uint spicar; /* 0xc0014 - Switch Port Information Capability Register */
+ uint socar; /* 0xc0018 - Source Operations Capability Register */
+ uint docar; /* 0xc001c - Destination Operations Capability Register */
+ char res1[32];
+ uint msr; /* 0xc0040 - Mailbox Command And Status Register */
+ uint pwdcsr; /* 0xc0044 - Port-Write and Doorbell Command And Status Register */
+ char res2[4];
+ uint pellccsr; /* 0xc004c - Processing Element Logic Layer Control Command and Status Register */
+ char res3[12];
+ uint lcsbacsr; /* 0xc005c - Local Configuration Space Base Address Command and Status Register */
+ uint bdidcsr; /* 0xc0060 - Base Device ID Command and Status Register */
+ char res4[4];
+ uint hbdidlcsr; /* 0xc0068 - Host Base Device ID Lock Command and Status Register */
+ uint ctcsr; /* 0xc006c - Component Tag Command and Status Register */
+ char res5[144];
+ uint pmbh0csr; /* 0xc0100 - 8/16 LP-LVDS Port Maintenance Block Header 0 Command and Status Register */
+ char res6[28];
+ uint pltoccsr; /* 0xc0120 - Port Link Time-out Control Command and Status Register */
+ uint prtoccsr; /* 0xc0124 - Port Response Time-out Control Command and Status Register */
+ char res7[20];
+ uint pgccsr; /* 0xc013c - Port General Command and Status Register */
+ uint plmreqcsr; /* 0xc0140 - Port Link Maintenance Request Command and Status Register */
+ uint plmrespcsr; /* 0xc0144 - Port Link Maintenance Response Command and Status Register */
+ uint plascsr; /* 0xc0148 - Port Local Ackid Status Command and Status Register */
+ char res8[12];
+ uint pescsr; /* 0xc0158 - Port Error and Status Command and Status Register */
+ uint pccsr; /* 0xc015c - Port Control Command and Status Register */
+ char res9[1184];
+ uint erbh; /* 0xc0600 - Error Reporting Block Header Register */
+ char res10[4];
+ uint ltledcsr; /* 0xc0608 - Logical/Transport layer error detect status register */
+ uint ltleecsr; /* 0xc060c - Logical/Transport layer error enable register */
+ char res11[4];
+ uint ltlaccsr; /* 0xc0614 - Logical/Transport layer addresss capture register */
+ uint ltldidccsr; /* 0xc0618 - Logical/Transport layer device ID capture register */
+ uint ltlcccsr; /* 0xc061c - Logical/Transport layer control capture register */
+ char res12[32];
+ uint edcsr; /* 0xc0640 - Port 0 error detect status register */
+ uint erecsr; /* 0xc0644 - Port 0 error rate enable status register */
+ uint ecacsr; /* 0xc0648 - Port 0 error capture attributes register */
+ uint pcseccsr0; /* 0xc064c - Port 0 packet/control symbol error capture register 0 */
+ uint peccsr1; /* 0xc0650 - Port 0 error capture command and status register 1 */
+ uint peccsr2; /* 0xc0654 - Port 0 error capture command and status register 2 */
+ uint peccsr3; /* 0xc0658 - Port 0 error capture command and status register 3 */
+ char res13[12];
+ uint ercsr; /* 0xc0668 - Port 0 error rate command and status register */
+ uint ertcsr; /* 0xc066C - Port 0 error rate threshold status register*/
+ char res14[63892];
+ uint llcr; /* 0xd0004 - Logical Layer Configuration Register */
+ char res15[12];
+ uint epwisr; /* 0xd0010 - Error / Port-Write Interrupt Status Register */
+ char res16[12];
+ uint lretcr; /* 0xd0020 - Logical Retry Error Threshold Configuration Register */
+ char res17[92];
+ uint pretcr; /* 0xd0080 - Physical Retry Erorr Threshold Configuration Register */
+ char res18[124];
+ uint adidcsr; /* 0xd0100 - Port 0 Alt. Device ID Command and Status Register */
+ char res19[28];
+ uint ptaacr; /* 0xd0120 - Port 0 Pass-Through/Accept-All Configuration Register */
+ char res20[12];
+ uint iecsr; /* 0xd0130 - Port 0 Implementation Error Status Register */
+ char res21[12];
+ uint pcr; /* 0xd0140 - Port 0 Phsyical Configuration RegisterRegister */
+ char res22[20];
+ uint slcsr; /* 0xd0158 - Port 0 Serial Link Command and Status Register */
+ char res23[4];
+ uint sleir; /* 0xd0160 - Port 0 Serial Link Error Injection Register */
+ char res24[2716];
+ uint rowtar0; /* 0xd0c00 - RapidIO Outbound Window Translation Address Register 0 */
+ uint rowtear0; /* 0xd0c04 - RapidIO Outbound Window Translation Ext. Address Register 0 */
+ char res25[8];
+ uint rowar0; /* 0xd0c10 - RapidIO Outbound Attributes Register 0 */
+ char res26[12];
+ uint rowtar1; /* 0xd0c20 - RapidIO Outbound Window Translation Address Register 1 */
+ uint rowtear1; /* 0xd0c24 - RapidIO Outbound Window Translation Ext. Address Register 1 */
+ uint rowbar1; /* 0xd0c28 - RapidIO Outbound Window Base Address Register 1 */
+ char res27[4];
+ uint rowar1; /* 0xd0c30 - RapidIO Outbound Attributes Register 1 */
+ uint rows1r1; /* 0xd0c34 - RapidIO Outbound Window Segment 1 Register 1 */
+ uint rows2r1; /* 0xd0c38 - RapidIO Outbound Window Segment 2 Register 1 */
+ uint rows3r1; /* 0xd0c3c - RapidIO Outbound Window Segment 3 Register 1 */
+ uint rowtar2; /* 0xd0c40 - RapidIO Outbound Window Translation Address Register 2 */
+ uint rowtear2; /* 0xd0c44 - RapidIO Outbound Window Translation Ext. Address Register 2 */
+ uint rowbar2; /* 0xd0c48 - RapidIO Outbound Window Base Address Register 2 */
+ char res28[4];
+ uint rowar2; /* 0xd0c50 - RapidIO Outbound Attributes Register 2 */
+ uint rows1r2; /* 0xd0c54 - RapidIO Outbound Window Segment 1 Register 2 */
+ uint rows2r2; /* 0xd0c58 - RapidIO Outbound Window Segment 2 Register 2 */
+ uint rows3r2; /* 0xd0c5c - RapidIO Outbound Window Segment 3 Register 2 */
+ uint rowtar3; /* 0xd0c60 - RapidIO Outbound Window Translation Address Register 3 */
+ uint rowtear3; /* 0xd0c64 - RapidIO Outbound Window Translation Ext. Address Register 3 */
+ uint rowbar3; /* 0xd0c68 - RapidIO Outbound Window Base Address Register 3 */
+ char res29[4];
+ uint rowar3; /* 0xd0c70 - RapidIO Outbound Attributes Register 3 */
+ uint rows1r3; /* 0xd0c74 - RapidIO Outbound Window Segment 1 Register 3 */
+ uint rows2r3; /* 0xd0c78 - RapidIO Outbound Window Segment 2 Register 3 */
+ uint rows3r3; /* 0xd0c7c - RapidIO Outbound Window Segment 3 Register 3 */
+ uint rowtar4; /* 0xd0c80 - RapidIO Outbound Window Translation Address Register 4 */
+ uint rowtear4; /* 0xd0c84 - RapidIO Outbound Window Translation Ext. Address Register 4 */
+ uint rowbar4; /* 0xd0c88 - RapidIO Outbound Window Base Address Register 4 */
+ char res30[4];
+ uint rowar4; /* 0xd0c90 - RapidIO Outbound Attributes Register 4 */
+ uint rows1r4; /* 0xd0c94 - RapidIO Outbound Window Segment 1 Register 4 */
+ uint rows2r4; /* 0xd0c98 - RapidIO Outbound Window Segment 2 Register 4 */
+ uint rows3r4; /* 0xd0c9c - RapidIO Outbound Window Segment 3 Register 4 */
+ uint rowtar5; /* 0xd0ca0 - RapidIO Outbound Window Translation Address Register 5 */
+ uint rowtear5; /* 0xd0ca4 - RapidIO Outbound Window Translation Ext. Address Register 5 */
+ uint rowbar5; /* 0xd0ca8 - RapidIO Outbound Window Base Address Register 5 */
+ char res31[4];
+ uint rowar5; /* 0xd0cb0 - RapidIO Outbound Attributes Register 5 */
+ uint rows1r5; /* 0xd0cb4 - RapidIO Outbound Window Segment 1 Register 5 */
+ uint rows2r5; /* 0xd0cb8 - RapidIO Outbound Window Segment 2 Register 5 */
+ uint rows3r5; /* 0xd0cbc - RapidIO Outbound Window Segment 3 Register 5 */
+ uint rowtar6; /* 0xd0cc0 - RapidIO Outbound Window Translation Address Register 6 */
+ uint rowtear6; /* 0xd0cc4 - RapidIO Outbound Window Translation Ext. Address Register 6 */
+ uint rowbar6; /* 0xd0cc8 - RapidIO Outbound Window Base Address Register 6 */
+ char res32[4];
+ uint rowar6; /* 0xd0cd0 - RapidIO Outbound Attributes Register 6 */
+ uint rows1r6; /* 0xd0cd4 - RapidIO Outbound Window Segment 1 Register 6 */
+ uint rows2r6; /* 0xd0cd8 - RapidIO Outbound Window Segment 2 Register 6 */
+ uint rows3r6; /* 0xd0cdc - RapidIO Outbound Window Segment 3 Register 6 */
+ uint rowtar7; /* 0xd0ce0 - RapidIO Outbound Window Translation Address Register 7 */
+ uint rowtear7; /* 0xd0ce4 - RapidIO Outbound Window Translation Ext. Address Register 7 */
+ uint rowbar7; /* 0xd0ce8 - RapidIO Outbound Window Base Address Register 7 */
+ char res33[4];
+ uint rowar7; /* 0xd0cf0 - RapidIO Outbound Attributes Register 7 */
+ uint rows1r7; /* 0xd0cf4 - RapidIO Outbound Window Segment 1 Register 7 */
+ uint rows2r7; /* 0xd0cf8 - RapidIO Outbound Window Segment 2 Register 7 */
+ uint rows3r7; /* 0xd0cfc - RapidIO Outbound Window Segment 3 Register 7 */
+ uint rowtar8; /* 0xd0d00 - RapidIO Outbound Window Translation Address Register 8 */
+ uint rowtear8; /* 0xd0d04 - RapidIO Outbound Window Translation Ext. Address Register 8 */
+ uint rowbar8; /* 0xd0d08 - RapidIO Outbound Window Base Address Register 8 */
+ char res34[4];
+ uint rowar8; /* 0xd0d10 - RapidIO Outbound Attributes Register 8 */
+ uint rows1r8; /* 0xd0d14 - RapidIO Outbound Window Segment 1 Register 8 */
+ uint rows2r8; /* 0xd0d18 - RapidIO Outbound Window Segment 2 Register 8 */
+ uint rows3r8; /* 0xd0d1c - RapidIO Outbound Window Segment 3 Register 8 */
+ char res35[64];
+ uint riwtar4; /* 0xd0d60 - RapidIO Inbound Window Translation Address Register 4 */
+ uint riwbar4; /* 0xd0d68 - RapidIO Inbound Window Base Address Register 4 */
+ char res36[4];
+ uint riwar4; /* 0xd0d70 - RapidIO Inbound Attributes Register 4 */
+ char res37[12];
+ uint riwtar3; /* 0xd0d80 - RapidIO Inbound Window Translation Address Register 3 */
+ char res38[4];
+ uint riwbar3; /* 0xd0d88 - RapidIO Inbound Window Base Address Register 3 */
+ char res39[4];
+ uint riwar3; /* 0xd0d90 - RapidIO Inbound Attributes Register 3 */
+ char res40[12];
+ uint riwtar2; /* 0xd0da0 - RapidIO Inbound Window Translation Address Register 2 */
+ char res41[4];
+ uint riwbar2; /* 0xd0da8 - RapidIO Inbound Window Base Address Register 2 */
+ char res42[4];
+ uint riwar2; /* 0xd0db0 - RapidIO Inbound Attributes Register 2 */
+ char res43[12];
+ uint riwtar1; /* 0xd0dc0 - RapidIO Inbound Window Translation Address Register 1 */
+ char res44[4];
+ uint riwbar1; /* 0xd0dc8 - RapidIO Inbound Window Base Address Register 1 */
+ char res45[4];
+ uint riwar1; /* 0xd0dd0 - RapidIO Inbound Attributes Register 1 */
+ char res46[12];
+ uint riwtar0; /* 0xd0de0 - RapidIO Inbound Window Translation Address Register 0 */
+ char res47[12];
+ uint riwar0; /* 0xd0df0 - RapidIO Inbound Attributes Register 0 */
+ char res48[12];
+ uint pnfedr; /* 0xd0e00 - Port Notification/Fatal Error Detect Register */
+ uint pnfedir; /* 0xd0e04 - Port Notification/Fatal Error Detect Register */
+ uint pnfeier; /* 0xd0e08 - Port Notification/Fatal Error Interrupt Enable Register */
+ uint pecr; /* 0xd0e0c - Port Error Control Register */
+ uint pepcsr0; /* 0xd0e10 - Port Error Packet/Control Symbol Register 0 */
+ uint pepr1; /* 0xd0e14 - Port Error Packet Register 1 */
+ uint pepr2; /* 0xd0e18 - Port Error Packet Register 2 */
+ char res49[4];
+ uint predr; /* 0xd0e20 - Port Recoverable Error Detect Register */
+ char res50[4];
+ uint pertr; /* 0xd0e28 - Port Error Recovery Threshold Register */
+ uint prtr; /* 0xd0e2c - Port Retry Threshold Register */
+ char res51[8656];
+ uint omr; /* 0xd3000 - Outbound Mode Register */
+ uint osr; /* 0xd3004 - Outbound Status Register */
+ uint eodqtpar; /* 0xd3008 - Extended Outbound Descriptor Queue Tail Pointer Address Register */
+ uint odqtpar; /* 0xd300c - Outbound Descriptor Queue Tail Pointer Address Register */
+ uint eosar; /* 0xd3010 - Extended Outbound Unit Source Address Register */
+ uint osar; /* 0xd3014 - Outbound Unit Source Address Register */
+ uint odpr; /* 0xd3018 - Outbound Destination Port Register */
+ uint odatr; /* 0xd301c - Outbound Destination Attributes Register */
+ uint odcr; /* 0xd3020 - Outbound Doubleword Count Register */
+ uint eodqhpar; /* 0xd3024 - Extended Outbound Descriptor Queue Head Pointer Address Register */
+ uint odqhpar; /* 0xd3028 - Outbound Descriptor Queue Head Pointer Address Register */
+ uint oretr; /* 0xd302C - Outbound Retry Error Threshold Register */
+ uint omgr; /* 0xd3030 - Outbound Multicast Group Register */
+ uint omlr; /* 0xd3034 - Outbound Multicast List Register */
+ char res52[40];
+ uint imr; /* 0xd3060 - Outbound Mode Register */
+ uint isr; /* 0xd3064 - Inbound Status Register */
+ uint eidqtpar; /* 0xd3068 - Extended Inbound Descriptor Queue Tail Pointer Address Register */
+ uint idqtpar; /* 0xd306c - Inbound Descriptor Queue Tail Pointer Address Register */
+ uint eifqhpar; /* 0xd3070 - Extended Inbound Frame Queue Head Pointer Address Register */
+ uint ifqhpar; /* 0xd3074 - Inbound Frame Queue Head Pointer Address Register */
+ uint imirir; /* 0xd3078 - Inbound Maximum Interrutp Report Interval Register */
+ char res53[900];
+ uint oddmr; /* 0xd3400 - Outbound Doorbell Mode Register */
+ uint oddsr; /* 0xd3404 - Outbound Doorbell Status Register */
+ char res54[16];
+ uint oddpr; /* 0xd3418 - Outbound Doorbell Destination Port Register */
+ uint oddatr; /* 0xd341C - Outbound Doorbell Destination Attributes Register */
+ char res55[12];
+ uint oddretr; /* 0xd342C - Outbound Doorbell Retry Threshold Configuration Register */
+ char res56[48];
+ uint idmr; /* 0xd3460 - Inbound Doorbell Mode Register */
+ uint idsr; /* 0xd3464 - Inbound Doorbell Status Register */
+ uint iedqtpar; /* 0xd3468 - Extended Inbound Doorbell Queue Tail Pointer Address Register */
+ uint iqtpar; /* 0xd346c - Inbound Doorbell Queue Tail Pointer Address Register */
+ uint iedqhpar; /* 0xd3470 - Extended Inbound Doorbell Queue Head Pointer Address Register */
+ uint idqhpar; /* 0xd3474 - Inbound Doorbell Queue Head Pointer Address Register */
+ uint idmirir; /* 0xd3478 - Inbound Doorbell Max Interrupt Report Interval Register */
+ char res57[100];
+ uint pwmr; /* 0xd34e0 - Port-Write Mode Register */
+ uint pwsr; /* 0xd34e4 - Port-Write Status Register */
+ uint epwqbar; /* 0xd34e8 - Extended Port-Write Queue Base Address Register */
+ uint pwqbar; /* 0xd34ec - Port-Write Queue Base Address Register */
+ char res58[51984];
+} ccsr_rio_t;
+
+/* Global Utilities Register Block(0xe_0000-0xf_ffff) */
+typedef struct ccsr_gur {
+ uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
+ uint porbmsr; /* 0xe0004 - POR boot mode status register */
+ uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
+ uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+ uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
+ char res1[12];
+ uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
+ char res2[12];
+ uint gpiocr; /* 0xe0030 - GPIO control register */
+ char res3[12];
+ uint gpoutdr; /* 0xe0040 - General-purpose output data register */
+ char res4[12];
+ uint gpindr; /* 0xe0050 - General-purpose input data register */
+ char res5[12];
+ uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
+ char res6[12];
+ uint devdisr; /* 0xe0070 - Device disable control */
+ char res7[12];
+ uint powmgtcsr; /* 0xe0080 - Power management status and control register */
+ char res8[12];
+ uint mcpsumr; /* 0xe0090 - Machine check summary register */
+ uint rstrscr; /* 0xe0094 - Reset request status and control register */
+ char res9[8];
+ uint pvr; /* 0xe00a0 - Processor version register */
+ uint svr; /* 0xe00a4 - System version register */
+ char res10a[8];
+ uint rstcr; /* 0xe00b0 - Reset control register */
+ char res10b[1868];
+ uint clkdvdr; /* 0xe0800 - Clock Divide register */
+ char res10c[796];
+ uint ddr1clkdr; /* 0xe0b20 - DDRC1 Clock Disable register */
+ char res10d[4];
+ uint ddr2clkdr; /* 0xe0b28 - DDRC2 Clock Disable register */
+ char res10e[724];
+ uint clkocr; /* 0xe0e00 - Clock out select register */
+ char res11[12];
+ uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
+ char res12[12];
+ uint lbcdllcr; /* 0xe0e20 - LBC DLL control register */
+ char res13a[224];
+ uint srds1cr0; /* 0xe0f04 - SerDes1 control register 0 */
+ char res13b[4];
+ uint srds1cr1; /* 0xe0f08 - SerDes1 control register 1 */
+ char res14[24];
+ uint ddrioovcr; /* 0xe0f24 - DDR IO Overdrive Control register */
+ char res15a[24];
+ uint srds2cr0; /* 0xe0f40 - SerDes2 control register 0 */
+ uint srds2cr1; /* 0xe0f44 - SerDes2 control register 1 */
+ char res16[184];
+} ccsr_gur_t;
+
+#define MPC8610_PORBMSR_HA 0x00070000
+#define MPC8610_PORBMSR_HA_SHIFT 16
+#define MPC8641_PORBMSR_HA 0x00060000
+#define MPC8641_PORBMSR_HA_SHIFT 17
+#define MPC8610_PORDEVSR_IO_SEL 0x00380000
+#define MPC8610_PORDEVSR_IO_SEL_SHIFT 19
+#define MPC8641_PORDEVSR_IO_SEL 0x000F0000
+#define MPC8641_PORDEVSR_IO_SEL_SHIFT 16
+#define MPC86xx_PORDEVSR_CORE1TE 0x00000080 /* ASMP (Core1 addr trans) */
+#define MPC86xx_DEVDISR_PCIEX1 0x80000000
+#define MPC86xx_DEVDISR_PCIEX2 0x40000000
+#define MPC86xx_DEVDISR_PCI1 0x80000000
+#define MPC86xx_DEVDISR_PCIE1 0x40000000
+#define MPC86xx_DEVDISR_PCIE2 0x20000000
+#define MPC86xx_DEVDISR_CPU0 0x00008000
+#define MPC86xx_DEVDISR_CPU1 0x00004000
+#define MPC86xx_RSTCR_HRST_REQ 0x00000002
+
+/*
+ * Watchdog register block(0xe_4000-0xe_4fff)
+ */
+typedef struct ccsr_wdt {
+ uint res0;
+ uint swcrr; /* System watchdog control register */
+ uint swcnr; /* System watchdog count register */
+ char res1[2];
+ ushort swsrr; /* System watchdog service register */
+ char res2[4080];
+} ccsr_wdt_t;
+
+typedef struct immap {
+ ccsr_local_mcm_t im_local_mcm;
+ ccsr_ddr_t im_ddr1;
+ ccsr_i2c_t im_i2c;
+ ccsr_duart_t im_duart;
+ ccsr_lbc_t im_lbc;
+ ccsr_ddr_t im_ddr2;
+ char res1[4096];
+ ccsr_pex_t im_pex1;
+ ccsr_pex_t im_pex2;
+ ccsr_ht_t im_ht;
+ char res2[90112];
+ ccsr_dma_t im_dma;
+ char res3[8192];
+ ccsr_tsec_t im_tsec1;
+ ccsr_tsec_t im_tsec2;
+ ccsr_tsec_t im_tsec3;
+ ccsr_tsec_t im_tsec4;
+ char res4[98304];
+ ccsr_pic_t im_pic;
+ char res5[389120];
+ ccsr_rio_t im_rio;
+ ccsr_gur_t im_gur;
+ char res6[12288];
+ ccsr_wdt_t im_wdt;
+} immap_t;
+
+extern immap_t *immr;
+
+#define CONFIG_SYS_MPC86xx_DDR_OFFSET (0x2000)
+#define CONFIG_SYS_MPC86xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC86xx_DDR2_OFFSET (0x6000)
+#define CONFIG_SYS_MPC86xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000)
+#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#endif /*__IMMAP_86xx__*/
--- /dev/null
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ *
+ * Copyright (c) 2006-2009 Freescale Semiconductor, Inc.
+ * Author: Shlomi Gridih <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __IMMAP_QE_H__
+#define __IMMAP_QE_H__
+
+/* QE I-RAM
+*/
+typedef struct qe_iram {
+ u32 iadd; /* I-RAM Address Register */
+ u32 idata; /* I-RAM Data Register */
+ u8 res0[0x4];
+ u32 iready;
+ u8 res1[0x70];
+} __attribute__ ((packed)) qe_iram_t;
+
+/* QE Interrupt Controller
+*/
+typedef struct qe_ic {
+ u32 qicr;
+ u32 qivec;
+ u32 qripnr;
+ u32 qipnr;
+ u32 qipxcc;
+ u32 qipycc;
+ u32 qipwcc;
+ u32 qipzcc;
+ u32 qimr;
+ u32 qrimr;
+ u32 qicnr;
+ u8 res0[0x4];
+ u32 qiprta;
+ u32 qiprtb;
+ u8 res1[0x4];
+ u32 qricr;
+ u8 res2[0x20];
+ u32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed)) qe_ic_t;
+
+/* Communications Processor
+*/
+typedef struct cp_qe {
+ u32 cecr; /* QE command register */
+ u32 ceccr; /* QE controller configuration register */
+ u32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ u16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ u16 cetmr; /* QE timers mask register */
+ u32 cetscr; /* QE time-stamp timer control register */
+ u32 cetsr1; /* QE time-stamp register 1 */
+ u32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ u32 cevter; /* QE virtual tasks event register */
+ u32 cevtmr; /* QE virtual tasks mask register */
+ u16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ u16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ u16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ u16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ u16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ u16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ u16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ u16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ u16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed)) cp_qe_t;
+
+/* QE Multiplexer
+*/
+typedef struct qe_mux {
+ u32 cmxgcr; /* CMX general clock route register */
+ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ u32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ u32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed)) qe_mux_t;
+
+/* QE Timers
+*/
+typedef struct qe_timers {
+ u8 gtcfr1; /* Timer 1 2 global configuration register */
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 4 global configuration register */
+ u8 res1[0xB];
+ u16 gtmdr1; /* Timer 1 mode register */
+ u16 gtmdr2; /* Timer 2 mode register */
+ u16 gtrfr1; /* Timer 1 reference register */
+ u16 gtrfr2; /* Timer 2 reference register */
+ u16 gtcpr1; /* Timer 1 capture register */
+ u16 gtcpr2; /* Timer 2 capture register */
+ u16 gtcnr1; /* Timer 1 counter */
+ u16 gtcnr2; /* Timer 2 counter */
+ u16 gtmdr3; /* Timer 3 mode register */
+ u16 gtmdr4; /* Timer 4 mode register */
+ u16 gtrfr3; /* Timer 3 reference register */
+ u16 gtrfr4; /* Timer 4 reference register */
+ u16 gtcpr3; /* Timer 3 capture register */
+ u16 gtcpr4; /* Timer 4 capture register */
+ u16 gtcnr3; /* Timer 3 counter */
+ u16 gtcnr4; /* Timer 4 counter */
+ u16 gtevr1; /* Timer 1 event register */
+ u16 gtevr2; /* Timer 2 event register */
+ u16 gtevr3; /* Timer 3 event register */
+ u16 gtevr4; /* Timer 4 event register */
+ u16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed)) qe_timers_t;
+
+/* BRG
+*/
+typedef struct qe_brg {
+ u32 brgc1; /* BRG1 configuration register */
+ u32 brgc2; /* BRG2 configuration register */
+ u32 brgc3; /* BRG3 configuration register */
+ u32 brgc4; /* BRG4 configuration register */
+ u32 brgc5; /* BRG5 configuration register */
+ u32 brgc6; /* BRG6 configuration register */
+ u32 brgc7; /* BRG7 configuration register */
+ u32 brgc8; /* BRG8 configuration register */
+ u32 brgc9; /* BRG9 configuration register */
+ u32 brgc10; /* BRG10 configuration register */
+ u32 brgc11; /* BRG11 configuration register */
+ u32 brgc12; /* BRG12 configuration register */
+ u32 brgc13; /* BRG13 configuration register */
+ u32 brgc14; /* BRG14 configuration register */
+ u32 brgc15; /* BRG15 configuration register */
+ u32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed)) qe_brg_t;
+
+/* SPI
+*/
+typedef struct spi {
+ u8 res0[0x20];
+ u32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ u32 spitd; /* SPI transmit data register (cpu mode) */
+ u32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed)) spi_t;
+
+/* SI
+*/
+typedef struct si1 {
+ u16 siamr1; /* SI1 TDMA mode register */
+ u16 sibmr1; /* SI1 TDMB mode register */
+ u16 sicmr1; /* SI1 TDMC mode register */
+ u16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ u16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ u16 siemr1; /* SI1 TDME mode register 16 bits */
+ u16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ u16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ u16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ u32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed)) si1_t;
+
+/* SI Routing Tables
+*/
+typedef struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed)) sir_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ u16 usb_usep1;
+ u16 usb_usep2;
+ u16 usb_usep3;
+ u16 usb_usep4;
+ u8 res2[4];
+ u16 usb_usber;
+ u8 res3[2];
+ u16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ u16 usb_ussft;
+ u8 res5[2];
+ u16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed)) usb_t;
+
+/* MCC
+*/
+typedef struct mcc {
+ u32 mcce; /* MCC event register */
+ u32 mccm; /* MCC mask register */
+ u32 mccf; /* MCC configuration register */
+ u32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed)) mcc_t;
+
+/* QE UCC Slow
+*/
+typedef struct ucc_slow {
+ u32 gumr_l; /* UCCx general mode register (low) */
+ u32 gumr_h; /* UCCx general mode register (high) */
+ u16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ u16 utodr; /* UCCx transmit on demand register */
+ u16 udsr; /* UCCx data synchronization register */
+ u16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ u16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ u16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_slow_t;
+
+typedef struct ucc_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifctl; /* interface control reg */
+ u32 ifstat; /* interface statux reg */
+} __attribute__ ((packed))uec_mii_t;
+
+typedef struct ucc_ethernet {
+ u32 maccfg1; /* mac configuration reg. 1 */
+ u32 maccfg2; /* mac configuration reg. 2 */
+ u32 ipgifg; /* interframe gap reg. */
+ u32 hafdup; /* half-duplex reg. */
+ u8 res1[0x10];
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifctl; /* interface control reg */
+ u32 ifstat; /* interface statux reg */
+ u32 macstnaddr1; /* mac station address part 1 reg */
+ u32 macstnaddr2; /* mac station address part 2 reg */
+ u8 res2[0x8];
+ u32 uempr; /* UCC Ethernet Mac parameter reg */
+ u32 utbipar; /* UCC tbi address reg */
+ u16 uescr; /* UCC Ethernet statistics control reg */
+ u8 res3[0x180 - 0x15A];
+ u32 tx64; /* Total number of frames (including bad
+ * frames) transmitted that were exactly
+ * of the minimal length (64 for un tagged,
+ * 68 for tagged, or with length exactly
+ * equal to the parameter MINLength */
+ u32 tx127; /* Total number of frames (including bad
+ * frames) transmitted that were between
+ * MINLength (Including FCS length==4)
+ * and 127 octets */
+ u32 tx255; /* Total number of frames (including bad
+ * frames) transmitted that were between
+ * 128 (Including FCS length==4) and 255
+ * octets */
+ u32 rx64; /* Total number of frames received including
+ * bad frames that were exactly of the
+ * mninimal length (64 bytes) */
+ u32 rx127; /* Total number of frames (including bad
+ * frames) received that were between
+ * MINLength (Including FCS length==4)
+ * and 127 octets */
+ u32 rx255; /* Total number of frames (including
+ * bad frames) received that were between
+ * 128 (Including FCS length==4) and 255
+ * octets */
+ u32 txok; /* Total number of octets residing in frames
+ * that where involved in succesfull
+ * transmission */
+ u16 txcf; /* Total number of PAUSE control frames
+ * transmitted by this MAC */
+ u8 res4[0x2];
+ u32 tmca; /* Total number of frames that were transmitted
+ * succesfully with the group address bit set
+ * that are not broadcast frames */
+ u32 tbca; /* Total number of frames transmitted
+ * succesfully that had destination address
+ * field equal to the broadcast address */
+ u32 rxfok; /* Total number of frames received OK */
+ u32 rxbok; /* Total number of octets received OK */
+ u32 rbyt; /* Total number of octets received including
+ * octets in bad frames. Must be implemented
+ * in HW because it includes octets in frames
+ * that never even reach the UCC */
+ u32 rmca; /* Total number of frames that were received
+ * succesfully with the group address bit set
+ * that are not broadcast frames */
+ u32 rbca; /* Total number of frames received succesfully
+ * that had destination address equal to the
+ * broadcast address */
+ u32 scar; /* Statistics carry register */
+ u32 scam; /* Statistics caryy mask register */
+ u8 res5[0x200 - 0x1c4];
+} __attribute__ ((packed)) uec_t;
+
+/* QE UCC Fast
+*/
+typedef struct ucc_fast {
+ u32 gumr; /* UCCx general mode register */
+ u32 upsmr; /* UCCx protocol-specific mode register */
+ u16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ u16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ u32 ucce; /* UCCx event register */
+ u32 uccm; /* UCCx mask register. */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ u32 urfb; /* UCC receive FIFO base */
+ u16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ u16 urfet; /* UCC receive FIFO emergency threshold */
+ u16 urfset; /* UCC receive FIFO special emergency
+ * threshold */
+ u32 utfb; /* UCC transmit FIFO base */
+ u16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ u16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ u16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ u16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ u32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+ uec_t ucc_eth;
+} __attribute__ ((packed)) ucc_fast_t;
+
+/* QE UCC
+*/
+typedef struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_common_t;
+
+typedef struct ucc {
+ union {
+ ucc_slow_t slow;
+ ucc_fast_t fast;
+ ucc_common_t common;
+ };
+} __attribute__ ((packed)) ucc_t;
+
+/* MultiPHY UTOPIA POS Controllers (UPC)
+*/
+typedef struct upc {
+ u32 upgcr; /* UTOPIA/POS general configuration register */
+ u32 uplpa; /* UTOPIA/POS last PHY address */
+ u32 uphec; /* ATM HEC register */
+ u32 upuc; /* UTOPIA/POS UCC configuration */
+ u32 updc1; /* UTOPIA/POS device 1 configuration */
+ u32 updc2; /* UTOPIA/POS device 2 configuration */
+ u32 updc3; /* UTOPIA/POS device 3 configuration */
+ u32 updc4; /* UTOPIA/POS device 4 configuration */
+ u32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ u32 upde1; /* UTOPIA/POS device 1 event */
+ u32 upde2; /* UTOPIA/POS device 2 event */
+ u32 upde3; /* UTOPIA/POS device 3 event */
+ u32 upde4; /* UTOPIA/POS device 4 event */
+ u16 uprp1;
+ u16 uprp2;
+ u16 uprp3;
+ u16 uprp4;
+ u8 res1[0x8];
+ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ u32 uper1; /* Device 1 port enable register */
+ u32 uper2; /* Device 2 port enable register */
+ u32 uper3; /* Device 3 port enable register */
+ u32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed)) upc_t;
+
+/* SDMA
+*/
+typedef struct sdma {
+ u32 sdsr; /* Serial DMA status register */
+ u32 sdmr; /* Serial DMA mode register */
+ u32 sdtr1; /* SDMA system bus threshold register */
+ u32 sdtr2; /* SDMA secondary bus threshold register */
+ u32 sdhy1; /* SDMA system bus hysteresis register */
+ u32 sdhy2; /* SDMA secondary bus hysteresis register */
+ u32 sdta1; /* SDMA system bus address register */
+ u32 sdta2; /* SDMA secondary bus address register */
+ u32 sdtm1; /* SDMA system bus MSNUM register */
+ u32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ u32 sdaqr; /* SDMA address bus qualify register */
+ u32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ u32 sdwbcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed)) sdma_t;
+
+/* Debug Space
+*/
+typedef struct dbg {
+ u32 bpdcr; /* Breakpoint debug command register */
+ u32 bpdsr; /* Breakpoint debug status register */
+ u32 bpdmr; /* Breakpoint debug mask register */
+ u32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ u32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ u32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ u32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ u32 bprmir; /* Breakpoint request mode immediate register */
+ u32 bprmsr; /* Breakpoint request mode serial register */
+ u32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed)) dbg_t;
+
+/*
+ * RISC Special Registers (Trap and Breakpoint). These are described in
+ * the QE Developer's Handbook.
+*/
+typedef struct rsp {
+ u32 tibcr[16]; /* Trap/instruction breakpoint control regs */
+ u8 res0[64];
+ u32 ibcr0;
+ u32 ibs0;
+ u32 ibcnr0;
+ u8 res1[4];
+ u32 ibcr1;
+ u32 ibs1;
+ u32 ibcnr1;
+ u32 npcr;
+ u32 dbcr;
+ u32 dbar;
+ u32 dbamr;
+ u32 dbsr;
+ u32 dbcnr;
+ u8 res2[12];
+ u32 dbdr_h;
+ u32 dbdr_l;
+ u32 dbdmr_h;
+ u32 dbdmr_l;
+ u32 bsr;
+ u32 bor;
+ u32 bior;
+ u8 res3[4];
+ u32 iatr[4];
+ u32 eccr; /* Exception control configuration register */
+ u32 eicr;
+ u8 res4[0x100-0xf8];
+} __attribute__ ((packed)) rsp_t;
+
+typedef struct qe_immap {
+ qe_iram_t iram; /* I-RAM */
+ qe_ic_t ic; /* Interrupt Controller */
+ cp_qe_t cp; /* Communications Processor */
+ qe_mux_t qmx; /* QE Multiplexer */
+ qe_timers_t qet; /* QE Timers */
+ spi_t spi[0x2]; /* spi */
+ mcc_t mcc; /* mcc */
+ qe_brg_t brg; /* brg */
+ usb_t usb; /* USB */
+ si1_t si1; /* SI */
+ u8 res11[0x800];
+ sir_t sir; /* SI Routing Tables */
+ ucc_t ucc1; /* ucc1 */
+ ucc_t ucc3; /* ucc3 */
+ ucc_t ucc5; /* ucc5 */
+ ucc_t ucc7; /* ucc7 */
+ u8 res12[0x600];
+ upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
+ ucc_t ucc2; /* ucc2 */
+ ucc_t ucc4; /* ucc4 */
+ ucc_t ucc6; /* ucc6 */
+ ucc_t ucc8; /* ucc8 */
+ u8 res13[0x600];
+ upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
+ sdma_t sdma; /* SDMA */
+ dbg_t dbg; /* Debug Space */
+ rsp_t rsp[0x2]; /* RISC Special Registers
+ * (Trap and Breakpoint) */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+#if defined(CONFIG_MPC8568)
+ u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */
+ u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */
+#elif defined(CONFIG_MPC8569)
+ u8 muram[0x20000]; /* 0x1_0000 - 0x3_0000 Multi-user RAM */
+ u8 res17[0x10000]; /* 0x3_0000 - 0x4_0000 */
+#else
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+#endif
+} __attribute__ ((packed)) qe_map_t;
+
+extern qe_map_t *qe_immr;
+
+#if defined(CONFIG_MPC8568)
+#define QE_MURAM_SIZE 0x10000UL
+#elif defined(CONFIG_MPC8569)
+#define QE_MURAM_SIZE 0x20000UL
+#elif defined(CONFIG_MPC8360)
+#define QE_MURAM_SIZE 0xc000UL
+#elif defined(CONFIG_MPC832x)
+#define QE_MURAM_SIZE 0x4000UL
+#endif
+
+#if defined(CONFIG_MPC8323)
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
+#elif defined(CONFIG_MPC8569)
+#define MAX_QE_RISC 4
+#define QE_NUM_OF_SNUM 46
+#else
+#define MAX_QE_RISC 2
+#define QE_NUM_OF_SNUM 28
+#endif
+
+#endif /* __IMMAP_QE_H__ */
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef INTERRUPT_H
+#define INTERRUPT_H
+
+#if defined(CONFIG_XILINX_440)
+#include <asm/xilinx_irq.h>
+#else
+#include <asm/ppc4xx-uic.h>
+#endif
+
+void pic_enable(void);
+void pic_irq_enable(unsigned int irq);
+void pic_irq_disable(unsigned int irq);
+void pic_irq_ack(unsigned int irq);
+void external_interrupt(struct pt_regs *regs);
+void interrupt_run_handler(int vec);
+
+#endif
--- /dev/null
+/* originally from linux source.
+ * removed the dependencies on CONFIG_ values
+ * removed virt_to_phys stuff (and in fact everything surrounded by #if __KERNEL__)
+ * Modified By Rob Taylor, Flying Pig Systems, 2000
+ */
+
+#ifndef _PPC_IO_H
+#define _PPC_IO_H
+
+#include <linux/config.h>
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+#define SIO_CONFIG_RA 0x398
+#define SIO_CONFIG_RD 0x399
+
+#ifndef _IO_BASE
+#define _IO_BASE 0
+#endif
+
+#define readb(addr) in_8((volatile u8 *)(addr))
+#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
+#if !defined(__BIG_ENDIAN)
+#define readw(addr) (*(volatile u16 *) (addr))
+#define readl(addr) (*(volatile u32 *) (addr))
+#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
+#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
+#else
+#define readw(addr) in_le16((volatile u16 *)(addr))
+#define readl(addr) in_le32((volatile u32 *)(addr))
+#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
+#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
+#endif
+
+/*
+ * The insw/outsw/insl/outsl macros don't do byte-swapping.
+ * They are only used in practice for transferring buffers which
+ * are arrays of bytes, and byte-swapping is not appropriate in
+ * that case. - paulus
+ */
+#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns))
+#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns))
+#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
+#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
+#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
+#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
+
+#define inb(port) in_8((u8 *)((port)+_IO_BASE))
+#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
+#if !defined(__BIG_ENDIAN)
+#define inw(port) in_be16((u16 *)((port)+_IO_BASE))
+#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val))
+#define inl(port) in_be32((u32 *)((port)+_IO_BASE))
+#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val))
+#else
+#define inw(port) in_le16((u16 *)((port)+_IO_BASE))
+#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
+#define inl(port) in_le32((u32 *)((port)+_IO_BASE))
+#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
+#endif
+
+#define inb_p(port) in_8((u8 *)((port)+_IO_BASE))
+#define outb_p(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
+#define inw_p(port) in_le16((u16 *)((port)+_IO_BASE))
+#define outw_p(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
+#define inl_p(port) in_le32((u32 *)((port)+_IO_BASE))
+#define outl_p(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
+
+extern void _insb(volatile u8 *port, void *buf, int ns);
+extern void _outsb(volatile u8 *port, const void *buf, int ns);
+extern void _insw(volatile u16 *port, void *buf, int ns);
+extern void _outsw(volatile u16 *port, const void *buf, int ns);
+extern void _insl(volatile u32 *port, void *buf, int nl);
+extern void _outsl(volatile u32 *port, const void *buf, int nl);
+extern void _insw_ns(volatile u16 *port, void *buf, int ns);
+extern void _outsw_ns(volatile u16 *port, const void *buf, int ns);
+extern void _insl_ns(volatile u32 *port, void *buf, int nl);
+extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
+
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
+#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
+#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
+#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
+
+
+#define IO_SPACE_LIMIT ~0
+
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+/*
+ * Enforce In-order Execution of I/O:
+ * Acts as a barrier to ensure all previous I/O accesses have
+ * completed before any further ones are issued.
+ */
+static inline void eieio(void)
+{
+ __asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void sync(void)
+{
+ __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+static inline void isync(void)
+{
+ __asm__ __volatile__ ("isync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r() eieio()
+#define iobarrier_w() eieio()
+
+/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+#define __iomem
+#define PCI_FIX_ADDR(addr) (addr)
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+ *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+ *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+ *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v;
+}
+
+/*
+ * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
+ */
+extern inline int in_8(const volatile unsigned char __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__(
+ "sync; lbz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
+{
+ __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline int in_le16(const volatile unsigned short __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
+}
+
+extern inline int in_be16(const volatile unsigned short __iomem *addr)
+{
+ int ret;
+
+ __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
+{
+ __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
+ "r" (val), "r" (addr));
+}
+
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
+{
+ __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
+}
+
+extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
+}
+
+extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
+{
+ __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
+ "r" (val), "r" (addr));
+}
+
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
+{
+ __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
+}
+
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+ out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+#ifdef CONFIG_ADDR_MAP
+ return (void *)(addrmap_phys_to_virt(paddr));
+#else
+ return (void *)((unsigned long)paddr);
+#endif
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+#ifdef CONFIG_ADDR_MAP
+ return addrmap_virt_to_phys(vaddr);
+#else
+ return (phys_addr_t)((unsigned long)vaddr);
+#endif
+}
+
+#endif
--- /dev/null
+/*
+ * MPC8260 I/O port pin manipulation functions
+ */
+
+#ifndef _ASM_IOPIN_8260_H_
+#define _ASM_IOPIN_8260_H_
+
+#include <linux/types.h>
+#include <asm/immap_8260.h>
+
+#ifdef __KERNEL__
+
+typedef
+ struct {
+ u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
+ u_char pin:5; /* port pin (0-31) */
+ u_char flag:1; /* for whatever */
+ }
+iopin_t;
+
+#define IOPIN_PORTA 0
+#define IOPIN_PORTB 1
+#define IOPIN_PORTC 2
+#define IOPIN_PORTD 3
+
+extern __inline__ void
+iopin_set_high(iopin_t *iopin)
+{
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
+ datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void
+iopin_set_low(iopin_t *iopin)
+{
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
+ datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint
+iopin_is_high(iopin_t *iopin)
+{
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
+ return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint
+iopin_is_low(iopin_t *iopin)
+{
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
+ return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void
+iopin_set_out(iopin_t *iopin)
+{
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
+ dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void
+iopin_set_in(iopin_t *iopin)
+{
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
+ dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint
+iopin_is_out(iopin_t *iopin)
+{
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
+ return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint
+iopin_is_in(iopin_t *iopin)
+{
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
+ return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void
+iopin_set_odr(iopin_t *iopin)
+{
+ volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
+ odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void
+iopin_set_act(iopin_t *iopin)
+{
+ volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
+ odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint
+iopin_is_odr(iopin_t *iopin)
+{
+ volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
+ return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint
+iopin_is_act(iopin_t *iopin)
+{
+ volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
+ return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void
+iopin_set_ded(iopin_t *iopin)
+{
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
+ parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void
+iopin_set_gen(iopin_t *iopin)
+{
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
+ parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint
+iopin_is_ded(iopin_t *iopin)
+{
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
+ return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint
+iopin_is_gen(iopin_t *iopin)
+{
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
+ return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void
+iopin_set_opt2(iopin_t *iopin)
+{
+ volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
+ sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void
+iopin_set_opt1(iopin_t *iopin)
+{
+ volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
+ sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint
+iopin_is_opt2(iopin_t *iopin)
+{
+ volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
+ return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint
+iopin_is_opt1(iopin_t *iopin)
+{
+ volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
+ return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IOPIN_8260_H_ */
--- /dev/null
+/*
+ * MPC85xx I/O port pin manipulation functions
+ */
+
+#ifndef _ASM_IOPIN_85xx_H_
+#define _ASM_IOPIN_85xx_H_
+
+#include <linux/types.h>
+#include <asm/immap_85xx.h>
+
+#ifdef __KERNEL__
+
+typedef struct {
+ u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
+ u_char pin:5; /* port pin (0-31) */
+ u_char flag:1; /* for whatever */
+} iopin_t;
+
+#define IOPIN_PORTA 0
+#define IOPIN_PORTB 1
+#define IOPIN_PORTC 2
+#define IOPIN_PORTD 3
+
+extern __inline__ void iopin_set_high (iopin_t * iopin)
+{
+ volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+ datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void iopin_set_low (iopin_t * iopin)
+{
+ volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+ datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint iopin_is_high (iopin_t * iopin)
+{
+ volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+ return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint iopin_is_low (iopin_t * iopin)
+{
+ volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+ return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void iopin_set_out (iopin_t * iopin)
+{
+ volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+ dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void iopin_set_in (iopin_t * iopin)
+{
+ volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+ dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint iopin_is_out (iopin_t * iopin)
+{
+ volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+ return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint iopin_is_in (iopin_t * iopin)
+{
+ volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+ return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void iopin_set_odr (iopin_t * iopin)
+{
+ volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+ odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void iopin_set_act (iopin_t * iopin)
+{
+ volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+ odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint iopin_is_odr (iopin_t * iopin)
+{
+ volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+ return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint iopin_is_act (iopin_t * iopin)
+{
+ volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+ return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void iopin_set_ded (iopin_t * iopin)
+{
+ volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+ parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void iopin_set_gen (iopin_t * iopin)
+{
+ volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+ parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint iopin_is_ded (iopin_t * iopin)
+{
+ volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+ return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint iopin_is_gen (iopin_t * iopin)
+{
+ volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+ return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+extern __inline__ void iopin_set_opt2 (iopin_t * iopin)
+{
+ volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+ sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
+}
+
+extern __inline__ void iopin_set_opt1 (iopin_t * iopin)
+{
+ volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+ sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
+}
+
+extern __inline__ uint iopin_is_opt2 (iopin_t * iopin)
+{
+ volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+ return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
+}
+
+extern __inline__ uint iopin_is_opt1 (iopin_t * iopin)
+{
+ volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+ return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IOPIN_85xx_H_ */
--- /dev/null
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8xx I/O port pin manipulation functions
+ * Roughly based on iopin_8260.h
+ */
+
+#ifndef _ASM_IOPIN_8XX_H_
+#define _ASM_IOPIN_8XX_H_
+
+#include <linux/types.h>
+#include <asm/8xx_immap.h>
+
+#ifdef __KERNEL__
+
+typedef struct {
+ u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
+ u_char pin:5; /* port pin (0-31) */
+ u_char flag:1; /* for whatever */
+} iopin_t;
+
+#define IOPIN_PORTA 0
+#define IOPIN_PORTB 1
+#define IOPIN_PORTC 2
+#define IOPIN_PORTD 3
+
+extern __inline__ void
+iopin_set_high(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
+ *datp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
+ *datp |= (1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
+ *datp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
+ *datp |= (1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_low(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
+ *datp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
+ *datp &= ~(1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
+ *datp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
+ *datp &= ~(1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_high(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
+ return (*datp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
+ return (*datp >> (31 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
+ return (*datp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
+ return (*datp >> (15 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_low(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
+ return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
+ return ((*datp >> (31 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
+ return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
+ return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+extern __inline__ void
+iopin_set_out(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
+ *dirp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
+ *dirp |= (1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
+ *dirp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
+ *dirp |= (1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_in(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
+ *dirp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
+ *dirp &= ~(1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
+ *dirp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
+ *dirp &= ~(1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_out(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
+ return (*dirp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
+ return (*dirp >> (31 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
+ return (*dirp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
+ return (*dirp >> (15 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_in(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
+ return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
+ return ((*dirp >> (31 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
+ return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
+ return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+extern __inline__ void
+iopin_set_odr(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
+ *odrp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
+ *odrp |= (1 << (31 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_act(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
+ *odrp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
+ *odrp &= ~(1 << (31 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_odr(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
+ return (*odrp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
+ return (*odrp >> (31 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_act(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
+ return ((*odrp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
+ return ((*odrp >> (31 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+extern __inline__ void
+iopin_set_ded(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
+ *parp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
+ *parp |= (1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
+ *parp |= (1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
+ *parp |= (1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_gen(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
+ *parp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
+ *parp &= ~(1 << (31 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
+ *parp &= ~(1 << (15 - iopin->pin));
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
+ *parp &= ~(1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_ded(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
+ return (*parp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
+ return (*parp >> (31 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
+ return (*parp >> (15 - iopin->pin)) & 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
+ return (*parp >> (15 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_gen(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTA) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
+ return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTB) {
+ volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
+ return ((*parp >> (31 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
+ return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
+ } else if (iopin->port == IOPIN_PORTD) {
+ volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
+ return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+extern __inline__ void
+iopin_set_opt2(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
+ *sorp |= (1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_opt1(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
+ *sorp &= ~(1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_opt2(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
+ return (*sorp >> (15 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_opt1(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
+ return ((*sorp >> (15 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+extern __inline__ void
+iopin_set_falledge(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
+ *intp |= (1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ void
+iopin_set_anyedge(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
+ *intp &= ~(1 << (15 - iopin->pin));
+ }
+}
+
+extern __inline__ uint
+iopin_is_falledge(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
+ return (*intp >> (15 - iopin->pin)) & 1;
+ }
+ return 0;
+}
+
+extern __inline__ uint
+iopin_is_anyedge(iopin_t *iopin)
+{
+ if (iopin->port == IOPIN_PORTC) {
+ volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
+ return ((*intp >> (15 - iopin->pin)) & 1) ^ 1;
+ }
+ return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IOPIN_8XX_H_ */
--- /dev/null
+
+#ifndef _PPC_KERNEL_M8260_PCI_H
+#define _PPC_KERNEL_M8260_PCI_H
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KB 0xFFFF0000
+#define PCIMSK_128KB 0xFFFE0000
+#define PCIMSK_256KB 0xFFFC0000
+#define PCIMSK_512KB 0xFFF80000
+#define PCIMSK_1MB 0xFFF00000
+#define PCIMSK_2MB 0xFFE00000
+#define PCIMSK_4MB 0xFFC00000
+#define PCIMSK_8MB 0xFF800000
+#define PCIMSK_16MB 0xFF000000
+#define PCIMSK_32MB 0xFE000000
+#define PCIMSK_64MB 0xFC000000
+#define PCIMSK_128MB 0xF8000000
+#define PCIMSK_256MB 0xF0000000
+#define PCIMSK_512MB 0xE0000000
+#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
+ * addresses are translated to PCI addresses when the MPC826x is a PCI bus
+ * master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KB 0x000FFFFF
+#define POCMR_MASK_8KB 0x000FFFFE
+#define POCMR_MASK_16KB 0x000FFFFC
+#define POCMR_MASK_32KB 0x000FFFF8
+#define POCMR_MASK_64KB 0x000FFFF0
+#define POCMR_MASK_128KB 0x000FFFE0
+#define POCMR_MASK_256KB 0x000FFFC0
+#define POCMR_MASK_512KB 0x000FFF80
+#define POCMR_MASK_1MB 0x000FFF00
+#define POCMR_MASK_2MB 0x000FFE00
+#define POCMR_MASK_4MB 0x000FFC00
+#define POCMR_MASK_8MB 0x000FF800
+#define POCMR_MASK_16MB 0x000FF000
+#define POCMR_MASK_32MB 0x000FE000
+#define POCMR_MASK_64MB 0x000FC000
+#define POCMR_MASK_128MB 0x000F8000
+#define POCMR_MASK_256MB 0x000F0000
+#define POCMR_MASK_512MB 0x000E0000
+#define POCMR_MASK_1GB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI addresses
+ * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KB 0x000FFFFF
+#define PICMR_MASK_8KB 0x000FFFFE
+#define PICMR_MASK_16KB 0x000FFFFC
+#define PICMR_MASK_32KB 0x000FFFF8
+#define PICMR_MASK_64KB 0x000FFFF0
+#define PICMR_MASK_128KB 0x000FFFE0
+#define PICMR_MASK_256KB 0x000FFFC0
+#define PICMR_MASK_512KB 0x000FFF80
+#define PICMR_MASK_1MB 0x000FFF00
+#define PICMR_MASK_2MB 0x000FFE00
+#define PICMR_MASK_4MB 0x000FFC00
+#define PICMR_MASK_8MB 0x000FF800
+#define PICMR_MASK_16MB 0x000FF000
+#define PICMR_MASK_32MB 0x000FE000
+#define PICMR_MASK_64MB 0x000FC000
+#define PICMR_MASK_128MB 0x000F8000
+#define PICMR_MASK_256MB 0x000F0000
+#define PICMR_MASK_512MB 0x000E0000
+#define PICMR_MASK_1GB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
--- /dev/null
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_PPC_MC146818RTC_H
+#define __ASM_PPC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* __ASM_PPC_MC146818RTC_H */
--- /dev/null
+/*
+ * PowerPC memory management structures
+ */
+
+#ifndef _PPC_MMU_H_
+#define _PPC_MMU_H_
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long vsid:52;
+ unsigned long api:5;
+ unsigned long :5;
+ unsigned long h:1;
+ unsigned long v:1;
+ unsigned long long rpn:52;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long v:1; /* Entry is valid */
+ unsigned long vsid:24; /* Virtual segment identifier */
+ unsigned long h:1; /* Hash algorithm indicator */
+ unsigned long api:6; /* Abbreviated page index */
+ unsigned long rpn:20; /* Real (physical) page number */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :3; /* Unused */
+ unsigned long r:1; /* Referenced */
+ unsigned long c:1; /* Changed */
+ unsigned long w:1; /* Write-thru cache mode */
+ unsigned long i:1; /* Cache inhibited */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX 0 /* Supervisor read/write, User none */
+#define PP_RWRX 1 /* Supervisor read/write, User read */
+#define PP_RWRW 2 /* Supervisor read/write, User read/write */
+#define PP_RXRX 3 /* Supervisor read, User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+ unsigned long t:1; /* Normal or I/O type */
+ unsigned long ks:1; /* Supervisor 'key' (normally 0) */
+ unsigned long kp:1; /* User 'key' (normally 1) */
+ unsigned long n:1; /* No-execute */
+ unsigned long :4; /* Unused */
+ unsigned long vsid:24; /* Virtual Segment Identifier */
+} SEGREG;
+
+/* Block Address Translation (BAT) Registers */
+typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */
+ unsigned long bepi:15; /* Effective page index (virtual address) */
+ unsigned long :8; /* unused */
+ unsigned long w:1;
+ unsigned long i:1; /* Cache inhibit */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long ks:1; /* Supervisor key (normally 0) */
+ unsigned long kp:1; /* User key (normally 1) */
+ unsigned long pp:2; /* Page access protections */
+} P601_BATU;
+
+typedef struct _BATU { /* Upper part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long bepi:47;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long bepi:15; /* Effective page index (virtual address) */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :4; /* Unused */
+ unsigned long bl:11; /* Block size mask */
+ unsigned long vs:1; /* Supervisor valid */
+ unsigned long vp:1; /* User valid */
+} BATU;
+
+typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */
+ unsigned long brpn:15; /* Real page index (physical address) */
+ unsigned long :10; /* Unused */
+ unsigned long v:1; /* Valid bit */
+ unsigned long bl:6; /* Block size mask */
+} P601_BATL;
+
+typedef struct _BATL { /* Lower part of BAT (all except 601) */
+#ifdef CONFIG_PPC64BRIDGE
+ unsigned long long brpn:47;
+#else /* CONFIG_PPC64BRIDGE */
+ unsigned long brpn:15; /* Real page index (physical address) */
+#endif /* CONFIG_PPC64BRIDGE */
+ unsigned long :10; /* Unused */
+ unsigned long w:1; /* Write-thru cache */
+ unsigned long i:1; /* Cache inhibit */
+ unsigned long m:1; /* Memory coherence */
+ unsigned long g:1; /* Guarded (MBZ in IBAT) */
+ unsigned long :1; /* Unused */
+ unsigned long pp:2; /* Page access protections */
+} BATL;
+
+typedef struct _BAT {
+ BATU batu; /* Upper register */
+ BATL batl; /* Lower register */
+} BAT;
+
+typedef struct _P601_BAT {
+ P601_BATU batu; /* Upper register */
+ P601_BATL batl; /* Lower register */
+} P601_BAT;
+
+/*
+ * Simulated two-level MMU. This structure is used by the kernel
+ * to keep track of MMU mappings and is used to update/maintain
+ * the hardware HASH table which is really a cache of mappings.
+ *
+ * The simulated structures mimic the hardware available on other
+ * platforms, notably the 80x86 and 680x0.
+ */
+
+typedef struct _pte {
+ unsigned long page_num:20;
+ unsigned long flags:12; /* Page flags (some unused bits) */
+} pte;
+
+#define PD_SHIFT (10+12) /* Page directory */
+#define PD_MASK 0x02FF
+#define PT_SHIFT (12) /* Page Table */
+#define PT_MASK 0x02FF
+#define PG_SHIFT (12) /* Page Entry */
+
+
+/* MMU context */
+
+typedef struct _MMU_context {
+ SEGREG segs[16]; /* Segment registers */
+ pte **pmap; /* Two-level page-map structure */
+} MMU_context;
+
+extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
+extern void _tlbia(void); /* invalidate all TLB entries */
+
+#ifdef CONFIG_ADDR_MAP
+extern void init_addr_map(void);
+#endif
+
+typedef enum {
+ IBAT0 = 0, IBAT1, IBAT2, IBAT3,
+ DBAT0, DBAT1, DBAT2, DBAT3,
+#ifdef CONFIG_HIGH_BATS
+ IBAT4, IBAT5, IBAT6, IBAT7,
+ DBAT4, DBAT5, DBAT6, DBAT7
+#endif
+} ppc_bat_t;
+
+extern int read_bat(ppc_bat_t bat, unsigned long *upper, unsigned long *lower);
+extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
+extern void print_bats(void);
+
+#endif /* __ASSEMBLY__ */
+
+#define BATU_VS 0x00000002
+#define BATU_VP 0x00000001
+#define BATU_INVALID 0x00000000
+
+#define BATL_WRITETHROUGH 0x00000040
+#define BATL_CACHEINHIBIT 0x00000020
+#define BATL_MEMCOHERENCE 0x00000010
+#define BATL_GUARDEDSTORAGE 0x00000008
+#define BATL_NO_ACCESS 0x00000000
+
+#define BATL_PP_MSK 0x00000003
+#define BATL_PP_00 0x00000000 /* No access */
+#define BATL_PP_01 0x00000001 /* Read-only */
+#define BATL_PP_10 0x00000002 /* Read-write */
+#define BATL_PP_11 0x00000003
+
+#define BATL_PP_NO_ACCESS BATL_PP_00
+#define BATL_PP_RO BATL_PP_01
+#define BATL_PP_RW BATL_PP_10
+
+/* BAT Block size values */
+#define BATU_BL_128K 0x00000000
+#define BATU_BL_256K 0x00000004
+#define BATU_BL_512K 0x0000000c
+#define BATU_BL_1M 0x0000001c
+#define BATU_BL_2M 0x0000003c
+#define BATU_BL_4M 0x0000007c
+#define BATU_BL_8M 0x000000fc
+#define BATU_BL_16M 0x000001fc
+#define BATU_BL_32M 0x000003fc
+#define BATU_BL_64M 0x000007fc
+#define BATU_BL_128M 0x00000ffc
+#define BATU_BL_256M 0x00001ffc
+
+/* Block lengths for processors that support extended block length */
+#ifdef HID0_XBSEN
+#define BATU_BL_512M 0x00003ffc
+#define BATU_BL_1G 0x00007ffc
+#define BATU_BL_2G 0x0000fffc
+#define BATU_BL_4G 0x0001fffc
+#define BATU_BL_MAX BATU_BL_4G
+#else
+#define BATU_BL_MAX BATU_BL_256M
+#endif
+
+/* BAT Access Protection */
+#define BPP_XX 0x00 /* No access */
+#define BPP_RX 0x01 /* Read only */
+#define BPP_RW 0x02 /* Read/write */
+
+/* Macros to get values from BATs, once data is in the BAT register format */
+#define BATU_VALID(x) (x & 0x3)
+#define BATU_VADDR(x) (x & 0xfffe0000)
+#define BATL_PADDR(x) ((phys_addr_t)((x & 0xfffe0000) \
+ | ((x & 0x0e00ULL) << 24) \
+ | ((x & 0x04ULL) << 30)))
+#define BATU_SIZE(x) (1ULL << (fls((x & BATU_BL_MAX) >> 2) + 17))
+
+/* bytes into BATU_BL */
+#define TO_BATU_BL(x) \
+ (u32)((((1ull << __ilog2_u64((u64)x)) / (128 * 1024)) - 1) * 4)
+
+/* Used to set up SDR1 register */
+#define HASH_TABLE_SIZE_64K 0x00010000
+#define HASH_TABLE_SIZE_128K 0x00020000
+#define HASH_TABLE_SIZE_256K 0x00040000
+#define HASH_TABLE_SIZE_512K 0x00080000
+#define HASH_TABLE_SIZE_1M 0x00100000
+#define HASH_TABLE_SIZE_2M 0x00200000
+#define HASH_TABLE_SIZE_4M 0x00400000
+#define HASH_TABLE_MASK_64K 0x000
+#define HASH_TABLE_MASK_128K 0x001
+#define HASH_TABLE_MASK_256K 0x003
+#define HASH_TABLE_MASK_512K 0x007
+#define HASH_TABLE_MASK_1M 0x00F
+#define HASH_TABLE_MASK_2M 0x01F
+#define HASH_TABLE_MASK_4M 0x03F
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read. A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define MI_CTR 784 /* Instruction TLB control register */
+#define MI_GPM 0x80000000 /* Set domain manager mode */
+#define MI_PPM 0x40000000 /* Set subpage protection */
+#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
+#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
+#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
+#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
+#define MI_RESETVAL 0x00000000 /* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books. For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define MI_AP 786
+#define MI_Ks 0x80000000 /* Should not be set */
+#define MI_Kp 0x40000000 /* Should always be set */
+
+/* The effective page number register. When read, contains the information
+ * about the last instruction TLB miss. When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define MI_EPN 787
+#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
+#define MI_EVALID 0x00000200 /* Entry is valid */
+#define MI_ASIDMASK 0x0000000f /* ASID match value */
+ /* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define MI_TWC 789
+#define MI_APG 0x000001e0 /* Access protection group (0) */
+#define MI_GUARDED 0x00000010 /* Guarded storage */
+#define MI_PSMASK 0x0000000c /* Mask of page size bits */
+#define MI_PS8MEG 0x0000000c /* 8M page size */
+#define MI_PS512K 0x00000004 /* 512K page size */
+#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
+#define MI_SVALID 0x00000001 /* Segment entry is valid */
+ /* Reset value is undefined */
+
+/* Real page number. Defined by the pte. Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define MI_RPN 790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization. This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT 0x000001fd
+
+#define MD_CTR 792 /* Data TLB control register */
+#define MD_GPM 0x80000000 /* Set domain manager mode */
+#define MD_PPM 0x40000000 /* Set subpage protection */
+#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
+#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
+#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
+#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
+#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
+#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
+#define MD_RESETVAL 0x04000000 /* Value of register at reset */
+
+#define M_CASID 793 /* Address space ID (context) to match */
+#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books. For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define MD_AP 794
+#define MD_Ks 0x80000000 /* Should not be set */
+#define MD_Kp 0x40000000 /* Should always be set */
+
+/* The effective page number register. When read, contains the information
+ * about the last instruction TLB miss. When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define MD_EPN 795
+#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
+#define MD_EVALID 0x00000200 /* Entry is valid */
+#define MD_ASIDMASK 0x0000000f /* ASID match value */
+ /* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define M_TWB 796
+#define M_L1TB 0xfffff000 /* Level 1 table base address */
+#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
+ /* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written. It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define MD_TWC 797
+#define MD_L2TB 0xfffff000 /* Level 2 table base address */
+#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
+#define MD_APG 0x000001e0 /* Access protection group (0) */
+#define MD_GUARDED 0x00000010 /* Guarded storage */
+#define MD_PSMASK 0x0000000c /* Mask of page size bits */
+#define MD_PS8MEG 0x0000000c /* 8M page size */
+#define MD_PS512K 0x00000004 /* 512K page size */
+#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
+#define MD_WT 0x00000002 /* Use writethrough page attribute */
+#define MD_SVALID 0x00000001 /* Segment entry is valid */
+ /* Reset value is undefined */
+
+
+/* Real page number. Defined by the pte. Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define MD_RPN 798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define M_TW 799
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully- associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively.
+ */
+
+#define PPC4XX_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+/*
+ * FSL Book-E support
+ */
+
+#define MAS0_TLBSEL_MSK 0x30000000
+#define MAS0_TLBSEL(x) ((x << 28) & MAS0_TLBSEL_MSK)
+#define MAS0_ESEL_MSK 0x0FFF0000
+#define MAS0_ESEL(x) ((x << 16) & MAS0_ESEL_MSK)
+#define MAS0_NV(x) ((x) & 0x00000FFF)
+
+#define MAS1_VALID 0x80000000
+#define MAS1_IPROT 0x40000000
+#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_TS 0x00001000
+#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
+
+#define MAS2_EPN 0xFFFFF000
+#define MAS2_X0 0x00000040
+#define MAS2_X1 0x00000020
+#define MAS2_W 0x00000010
+#define MAS2_I 0x00000008
+#define MAS2_M 0x00000004
+#define MAS2_G 0x00000002
+#define MAS2_E 0x00000001
+
+#define MAS3_RPN 0xFFFFF000
+#define MAS3_U0 0x00000200
+#define MAS3_U1 0x00000100
+#define MAS3_U2 0x00000080
+#define MAS3_U3 0x00000040
+#define MAS3_UX 0x00000020
+#define MAS3_SX 0x00000010
+#define MAS3_UW 0x00000008
+#define MAS3_SW 0x00000004
+#define MAS3_UR 0x00000002
+#define MAS3_SR 0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL 0x000F0000
+#define MAS4_TSIZED(x) MAS1_TSIZE(x)
+#define MAS4_X0D 0x00000040
+#define MAS4_X1D 0x00000020
+#define MAS4_WD 0x00000010
+#define MAS4_ID 0x00000008
+#define MAS4_MD 0x00000004
+#define MAS4_GD 0x00000002
+#define MAS4_ED 0x00000001
+
+#define MAS6_SPID0 0x3FFF0000
+#define MAS6_SPID1 0x00007FFE
+#define MAS6_SAS 0x00000001
+#define MAS6_SPID MAS6_SPID0
+
+#define MAS7_RPN 0xFFFFFFFF
+
+#define FSL_BOOKE_MAS0(tlbsel,esel,nv) \
+ (MAS0_TLBSEL(tlbsel) | MAS0_ESEL(esel) | MAS0_NV(nv))
+#define FSL_BOOKE_MAS1(v,iprot,tid,ts,tsize) \
+ ((((v) << 31) & MAS1_VALID) |\
+ (((iprot) << 30) & MAS1_IPROT) |\
+ (MAS1_TID(tid)) |\
+ (((ts) << 12) & MAS1_TS) |\
+ (MAS1_TSIZE(tsize)))
+#define FSL_BOOKE_MAS2(epn, wimge) \
+ (((epn) & MAS3_RPN) | (wimge))
+#define FSL_BOOKE_MAS3(rpn, user, perms) \
+ (((rpn) & MAS3_RPN) | (user) | (perms))
+#define FSL_BOOKE_MAS7(rpn) \
+ (((u64)(rpn)) >> 32)
+
+#define BOOKE_PAGESZ_1K 0
+#define BOOKE_PAGESZ_4K 1
+#define BOOKE_PAGESZ_16K 2
+#define BOOKE_PAGESZ_64K 3
+#define BOOKE_PAGESZ_256K 4
+#define BOOKE_PAGESZ_1M 5
+#define BOOKE_PAGESZ_4M 6
+#define BOOKE_PAGESZ_16M 7
+#define BOOKE_PAGESZ_64M 8
+#define BOOKE_PAGESZ_256M 9
+#define BOOKE_PAGESZ_1G 10
+#define BOOKE_PAGESZ_4G 11
+#define BOOKE_PAGESZ_16GB 12
+#define BOOKE_PAGESZ_64GB 13
+#define BOOKE_PAGESZ_256GB 14
+#define BOOKE_PAGESZ_1TB 15
+
+#ifdef CONFIG_E500
+#ifndef __ASSEMBLY__
+extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
+ u8 perms, u8 wimge,
+ u8 ts, u8 esel, u8 tsize, u8 iprot);
+extern void disable_tlb(u8 esel);
+extern void invalidate_tlb(u8 tlb);
+extern void init_tlbs(void);
+extern int find_tlb_idx(void *addr, u8 tlbsel);
+extern void init_used_tlb_cams(void);
+extern int find_free_tlbcam(void);
+
+extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
+
+extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
+
+#define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
+ { .mas0 = FSL_BOOKE_MAS0(_tlb, _esel, 0), \
+ .mas1 = FSL_BOOKE_MAS1(1, _iprot, 0, _ts, _sz), \
+ .mas2 = FSL_BOOKE_MAS2(_epn, _wimge), \
+ .mas3 = FSL_BOOKE_MAS3(_rpn, 0, _perms), \
+ .mas7 = FSL_BOOKE_MAS7(_rpn), }
+
+struct fsl_e_tlb_entry {
+ u32 mas0;
+ u32 mas1;
+ u32 mas2;
+ u32 mas3;
+ u32 mas7;
+};
+
+extern struct fsl_e_tlb_entry tlb_table[];
+extern int num_tlb_entries;
+#endif
+#endif
+
+#ifdef CONFIG_E300
+#define LAWAR_EN 0x80000000
+#define LAWAR_SIZE 0x0000003F
+
+#define LAWAR_TRGT_IF_PCI 0x00000000
+#define LAWAR_TRGT_IF_PCI1 0x00000000
+#define LAWAR_TRGT_IF_PCIX 0x00000000
+#define LAWAR_TRGT_IF_PCI2 0x00100000
+#define LAWAR_TRGT_IF_PCIE1 0x00200000
+#define LAWAR_TRGT_IF_PCIE2 0x00100000
+#define LAWAR_TRGT_IF_PCIE3 0x00300000
+#define LAWAR_TRGT_IF_LBC 0x00400000
+#define LAWAR_TRGT_IF_CCSR 0x00800000
+#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
+#define LAWAR_TRGT_IF_RIO 0x00c00000
+#define LAWAR_TRGT_IF_DDR 0x00f00000
+#define LAWAR_TRGT_IF_DDR1 0x00f00000
+#define LAWAR_TRGT_IF_DDR2 0x01600000
+
+#define LAWAR_SIZE_BASE 0xa
+#define LAWAR_SIZE_4K (LAWAR_SIZE_BASE+1)
+#define LAWAR_SIZE_8K (LAWAR_SIZE_BASE+2)
+#define LAWAR_SIZE_16K (LAWAR_SIZE_BASE+3)
+#define LAWAR_SIZE_32K (LAWAR_SIZE_BASE+4)
+#define LAWAR_SIZE_64K (LAWAR_SIZE_BASE+5)
+#define LAWAR_SIZE_128K (LAWAR_SIZE_BASE+6)
+#define LAWAR_SIZE_256K (LAWAR_SIZE_BASE+7)
+#define LAWAR_SIZE_512K (LAWAR_SIZE_BASE+8)
+#define LAWAR_SIZE_1M (LAWAR_SIZE_BASE+9)
+#define LAWAR_SIZE_2M (LAWAR_SIZE_BASE+10)
+#define LAWAR_SIZE_4M (LAWAR_SIZE_BASE+11)
+#define LAWAR_SIZE_8M (LAWAR_SIZE_BASE+12)
+#define LAWAR_SIZE_16M (LAWAR_SIZE_BASE+13)
+#define LAWAR_SIZE_32M (LAWAR_SIZE_BASE+14)
+#define LAWAR_SIZE_64M (LAWAR_SIZE_BASE+15)
+#define LAWAR_SIZE_128M (LAWAR_SIZE_BASE+16)
+#define LAWAR_SIZE_256M (LAWAR_SIZE_BASE+17)
+#define LAWAR_SIZE_512M (LAWAR_SIZE_BASE+18)
+#define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19)
+#define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20)
+#define LAWAR_SIZE_4G (LAWAR_SIZE_BASE+21)
+#define LAWAR_SIZE_8G (LAWAR_SIZE_BASE+22)
+#define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23)
+#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24)
+#endif
+
+#ifdef CONFIG_440
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
+#define TLB2(a) ((a) & 0x00000fbf)
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ;\
+0: mflr r0 ;\
+ mtlr r1 ;\
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/*----------------------------------------------------------------------------+
+| TLB specific defines.
++----------------------------------------------------------------------------*/
+#define TLB_256MB_ALIGN_MASK 0xFF0000000ULL
+#define TLB_16MB_ALIGN_MASK 0xFFF000000ULL
+#define TLB_1MB_ALIGN_MASK 0xFFFF00000ULL
+#define TLB_256KB_ALIGN_MASK 0xFFFFC0000ULL
+#define TLB_64KB_ALIGN_MASK 0xFFFFF0000ULL
+#define TLB_16KB_ALIGN_MASK 0xFFFFFC000ULL
+#define TLB_4KB_ALIGN_MASK 0xFFFFFF000ULL
+#define TLB_1KB_ALIGN_MASK 0xFFFFFFC00ULL
+#define TLB_256MB_SIZE 0x10000000
+#define TLB_16MB_SIZE 0x01000000
+#define TLB_1MB_SIZE 0x00100000
+#define TLB_256KB_SIZE 0x00040000
+#define TLB_64KB_SIZE 0x00010000
+#define TLB_16KB_SIZE 0x00004000
+#define TLB_4KB_SIZE 0x00001000
+#define TLB_1KB_SIZE 0x00000400
+
+#define TLB_WORD0_EPN_MASK 0xFFFFFC00
+#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_V_MASK 0x00000200
+#define TLB_WORD0_V_ENABLE 0x00000200
+#define TLB_WORD0_V_DISABLE 0x00000000
+#define TLB_WORD0_TS_MASK 0x00000100
+#define TLB_WORD0_TS_1 0x00000100
+#define TLB_WORD0_TS_0 0x00000000
+#define TLB_WORD0_SIZE_MASK 0x000000F0
+#define TLB_WORD0_SIZE_1KB 0x00000000
+#define TLB_WORD0_SIZE_4KB 0x00000010
+#define TLB_WORD0_SIZE_16KB 0x00000020
+#define TLB_WORD0_SIZE_64KB 0x00000030
+#define TLB_WORD0_SIZE_256KB 0x00000040
+#define TLB_WORD0_SIZE_1MB 0x00000050
+#define TLB_WORD0_SIZE_16MB 0x00000070
+#define TLB_WORD0_SIZE_256MB 0x00000090
+#define TLB_WORD0_TPAR_MASK 0x0000000F
+#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD1_RPN_MASK 0xFFFFFC00
+#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_PAR1_MASK 0x00000300
+#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define TLB_WORD1_PAR1_0 0x00000000
+#define TLB_WORD1_PAR1_1 0x00000100
+#define TLB_WORD1_PAR1_2 0x00000200
+#define TLB_WORD1_PAR1_3 0x00000300
+#define TLB_WORD1_ERPN_MASK 0x0000000F
+#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD2_PAR2_MASK 0xC0000000
+#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+#define TLB_WORD2_PAR2_0 0x00000000
+#define TLB_WORD2_PAR2_1 0x40000000
+#define TLB_WORD2_PAR2_2 0x80000000
+#define TLB_WORD2_PAR2_3 0xC0000000
+#define TLB_WORD2_U0_MASK 0x00008000
+#define TLB_WORD2_U0_ENABLE 0x00008000
+#define TLB_WORD2_U0_DISABLE 0x00000000
+#define TLB_WORD2_U1_MASK 0x00004000
+#define TLB_WORD2_U1_ENABLE 0x00004000
+#define TLB_WORD2_U1_DISABLE 0x00000000
+#define TLB_WORD2_U2_MASK 0x00002000
+#define TLB_WORD2_U2_ENABLE 0x00002000
+#define TLB_WORD2_U2_DISABLE 0x00000000
+#define TLB_WORD2_U3_MASK 0x00001000
+#define TLB_WORD2_U3_ENABLE 0x00001000
+#define TLB_WORD2_U3_DISABLE 0x00000000
+#define TLB_WORD2_W_MASK 0x00000800
+#define TLB_WORD2_W_ENABLE 0x00000800
+#define TLB_WORD2_W_DISABLE 0x00000000
+#define TLB_WORD2_I_MASK 0x00000400
+#define TLB_WORD2_I_ENABLE 0x00000400
+#define TLB_WORD2_I_DISABLE 0x00000000
+#define TLB_WORD2_M_MASK 0x00000200
+#define TLB_WORD2_M_ENABLE 0x00000200
+#define TLB_WORD2_M_DISABLE 0x00000000
+#define TLB_WORD2_G_MASK 0x00000100
+#define TLB_WORD2_G_ENABLE 0x00000100
+#define TLB_WORD2_G_DISABLE 0x00000000
+#define TLB_WORD2_E_MASK 0x00000080
+#define TLB_WORD2_E_ENABLE 0x00000080
+#define TLB_WORD2_E_DISABLE 0x00000000
+#define TLB_WORD2_UX_MASK 0x00000020
+#define TLB_WORD2_UX_ENABLE 0x00000020
+#define TLB_WORD2_UX_DISABLE 0x00000000
+#define TLB_WORD2_UW_MASK 0x00000010
+#define TLB_WORD2_UW_ENABLE 0x00000010
+#define TLB_WORD2_UW_DISABLE 0x00000000
+#define TLB_WORD2_UR_MASK 0x00000008
+#define TLB_WORD2_UR_ENABLE 0x00000008
+#define TLB_WORD2_UR_DISABLE 0x00000000
+#define TLB_WORD2_SX_MASK 0x00000004
+#define TLB_WORD2_SX_ENABLE 0x00000004
+#define TLB_WORD2_SX_DISABLE 0x00000000
+#define TLB_WORD2_SW_MASK 0x00000002
+#define TLB_WORD2_SW_ENABLE 0x00000002
+#define TLB_WORD2_SW_DISABLE 0x00000000
+#define TLB_WORD2_SR_MASK 0x00000001
+#define TLB_WORD2_SR_ENABLE 0x00000001
+#define TLB_WORD2_SR_DISABLE 0x00000000
+
+/*----------------------------------------------------------------------------+
+| Following instructions are not available in Book E mode of the GNU assembler.
++----------------------------------------------------------------------------*/
+#define DCCCI(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(454<<1)
+
+#define ICCCI(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(966<<1)
+
+#define DCREAD(rt,ra,rb) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(486<<1)
+
+#define ICREAD(ra,rb) .long 0x7c000000|\
+ (ra<<16)|(rb<<11)|(998<<1)
+
+#define TLBSX(rt,ra,rb) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define TLBWE(rs,ra,ws) .long 0x7c000000|\
+ (rs<<21)|(ra<<16)|(ws<<11)|(978<<1)
+
+#define TLBRE(rt,ra,ws) .long 0x7c000000|\
+ (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+
+#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\
+ (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define MSYNC .long 0x7c000000|\
+ (598<<1)
+
+#define MBAR_INST .long 0x7c000000|\
+ (854<<1)
+
+#ifndef __ASSEMBLY__
+/* Prototypes */
+void mttlb1(unsigned long index, unsigned long value);
+void mttlb2(unsigned long index, unsigned long value);
+void mttlb3(unsigned long index, unsigned long value);
+unsigned long mftlb1(unsigned long index);
+unsigned long mftlb2(unsigned long index);
+unsigned long mftlb3(unsigned long index);
+
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void remove_tlb(u32 vaddr, u32 size);
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value);
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_440 */
+#endif /* _PPC_MMU_H_ */
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_MP_H_
+#define _ASM_MP_H_
+
+#include <lmb.h>
+
+void setup_mp(void);
+void cpu_mp_lmb_reserve(struct lmb *lmb);
+u32 determine_mp_bootpg(void);
+
+#endif
--- /dev/null
+/*
+ * include/asm-ppc/mpc512x.h
+ *
+ * Prototypes, etc. for the Freescale MPC512x embedded cpu chips
+ *
+ * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASMPPC_MPC512X_H
+#define __ASMPPC_MPC512X_H
+
+/*
+ * macros for manipulating CSx_START/STOP
+ */
+#define CSAW_START(start) ((start) & 0xFFFF0000)
+#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
+
+/*
+ * Inlines
+ */
+
+/*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync.
+ */
+static inline void sync_law(volatile void *addr)
+{
+ in_be32(addr);
+ __asm__ __volatile__ ("isync");
+}
+
+/*
+ * Prototypes
+ */
+extern long int fixed_sdram(ddr512x_config_t *mddrc_config,
+ u32 *dram_init_seq, int seq_sz);
+extern int mpc5121_diu_init(void);
+extern void ide_set_reset(int idereset);
+
+#endif /* __ASMPPC_MPC512X_H */
--- /dev/null
+#ifndef _PPC_KERNEL_MPC8349_PCI_H
+#define _PPC_KERNEL_MPC8349_PCI_H
+
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KB 0xFFFF0000
+#define PCIMSK_128KB 0xFFFE0000
+#define PCIMSK_256KB 0xFFFC0000
+#define PCIMSK_512KB 0xFFF80000
+#define PCIMSK_1MB 0xFFF00000
+#define PCIMSK_2MB 0xFFE00000
+#define PCIMSK_4MB 0xFFC00000
+#define PCIMSK_8MB 0xFF800000
+#define PCIMSK_16MB 0xFF000000
+#define PCIMSK_32MB 0xFE000000
+#define PCIMSK_64MB 0xFC000000
+#define PCIMSK_128MB 0xF8000000
+#define PCIMSK_256MB 0xF0000000
+#define PCIMSK_512MB 0xE0000000
+#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus
+ * (local) addresses are translated to PCI addresses when the MPC826x is
+ * a PCI bus master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KB 0x000FFFFF
+#define POCMR_MASK_8KB 0x000FFFFE
+#define POCMR_MASK_16KB 0x000FFFFC
+#define POCMR_MASK_32KB 0x000FFFF8
+#define POCMR_MASK_64KB 0x000FFFF0
+#define POCMR_MASK_128KB 0x000FFFE0
+#define POCMR_MASK_256KB 0x000FFFC0
+#define POCMR_MASK_512KB 0x000FFF80
+#define POCMR_MASK_1MB 0x000FFF00
+#define POCMR_MASK_2MB 0x000FFE00
+#define POCMR_MASK_4MB 0x000FFC00
+#define POCMR_MASK_8MB 0x000FF800
+#define POCMR_MASK_16MB 0x000FF000
+#define POCMR_MASK_32MB 0x000FE000
+#define POCMR_MASK_64MB 0x000FC000
+#define POCMR_MASK_128MB 0x000F8000
+#define POCMR_MASK_256MB 0x000F0000
+#define POCMR_MASK_512MB 0x000E0000
+#define POCMR_MASK_1GB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+#define POCMR_PCI2 0x10000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI
+ * addresses are translated to 60x bus (local) addresses when the
+ * MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KB 0x000FFFFF
+#define PICMR_MASK_8KB 0x000FFFFE
+#define PICMR_MASK_16KB 0x000FFFFC
+#define PICMR_MASK_32KB 0x000FFFF8
+#define PICMR_MASK_64KB 0x000FFFF0
+#define PICMR_MASK_128KB 0x000FFFE0
+#define PICMR_MASK_256KB 0x000FFFC0
+#define PICMR_MASK_512KB 0x000FFF80
+#define PICMR_MASK_1MB 0x000FFF00
+#define PICMR_MASK_2MB 0x000FFE00
+#define PICMR_MASK_4MB 0x000FFC00
+#define PICMR_MASK_8MB 0x000FF800
+#define PICMR_MASK_16MB 0x000FF000
+#define PICMR_MASK_32MB 0x000FE000
+#define PICMR_MASK_64MB 0x000FC000
+#define PICMR_MASK_128MB 0x000F8000
+#define PICMR_MASK_256MB 0x000F0000
+#define PICMR_MASK_512MB 0x000E0000
+#define PICMR_MASK_1GB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
--- /dev/null
+/*
+ * Freescale non-CPM SPI Controller
+ *
+ * Copyright 2008 Qstreams Networks, Inc.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_MPC8XXX_SPI_H_
+#define _ASM_MPC8XXX_SPI_H_
+
+#include <asm/types.h>
+
+#if defined(CONFIG_MPC834x) || \
+ defined(CONFIG_MPC8313) || \
+ defined(CONFIG_MPC8315) || \
+ defined(CONFIG_MPC837x)
+
+typedef struct spi8xxx {
+ u8 res0[0x20]; /* 0x0-0x01f reserved */
+ u32 mode; /* mode register */
+ u32 event; /* event register */
+ u32 mask; /* mask register */
+ u32 com; /* command register */
+ u32 tx; /* transmit register */
+ u32 rx; /* receive register */
+ u8 res1[0xFC8]; /* fill up to 0x1000 */
+} spi8xxx_t;
+
+#endif
+
+#endif /* _ASM_MPC8XXX_SPI_H_ */
--- /dev/null
+/* originally from linux source (asm-ppc/io.h).
+ * Sanity added by Rob Taylor, Flying Pig Systems, 2000
+ */
+#ifndef _PCI_IO_H_
+#define _PCI_IO_H_
+
+#include "io.h"
+
+
+#define pci_read_le16(addr, dest) \
+ __asm__ __volatile__("lhbrx %0,0,%1" : "=r" (dest) : \
+ "r" (addr), "m" (*addr));
+
+#define pci_write_le16(addr, val) \
+ __asm__ __volatile__("sthbrx %1,0,%2" : "=m" (*addr) : \
+ "r" (val), "r" (addr));
+
+
+#define pci_read_le32(addr, dest) \
+ __asm__ __volatile__("lwbrx %0,0,%1" : "=r" (dest) : \
+ "r" (addr), "m" (*addr));
+
+#define pci_write_le32(addr, val) \
+__asm__ __volatile__("stwbrx %1,0,%2" : "=m" (*addr) : \
+ "r" (val), "r" (addr));
+
+#define pci_readb(addr,b) ((b) = *(volatile u8 *) (addr))
+#define pci_writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
+
+#if !defined(__BIG_ENDIAN)
+#define pci_readw(addr,b) ((b) = *(volatile u16 *) (addr))
+#define pci_readl(addr,b) ((b) = *(volatile u32 *) (addr))
+#define pci_writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
+#define pci_writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
+#else
+#define pci_readw(addr,b) pci_read_le16((volatile u16 *)(addr),(b))
+#define pci_readl(addr,b) pci_read_le32((volatile u32 *)(addr),(b))
+#define pci_writew(b,addr) pci_write_le16((volatile u16 *)(addr),(b))
+#define pci_writel(b,addr) pci_write_le32((volatile u32 *)(addr),(b))
+#endif
+
+
+#endif /* _PCI_IO_H_ */
--- /dev/null
+/* 11/02/95 */
+/*----------------------------------------------------------------------------*/
+/* Plug and Play header definitions */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for PnP on PowerPC Reference Platform */
+/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */
+/* (or later versions) is available on Compuserve in the PLUGPLAY area. */
+/* This code has extensions to that specification, namely new short and */
+/* long tag types for platform dependent information */
+
+/* Warning: LE notation used throughout this file */
+
+/* For enum's: if given in hex then they are bit significant, i.e. */
+/* only one bit is on for each enum */
+
+#ifndef _PNP_
+#define _PNP_
+
+#ifndef __ASSEMBLY__
+#define MAX_MEM_REGISTERS 9
+#define MAX_IO_PORTS 20
+#define MAX_IRQS 7
+/*#define MAX_DMA_CHANNELS 7*/
+
+/* Interrupt controllers */
+
+#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */
+#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */
+#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */
+#define PNPinterrupt3 "PNP0003" /* APIC */
+#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */
+
+/* Timers */
+
+#define PNPtimer0 "PNP0100" /* AT Timer */
+#define PNPtimer1 "PNP0101" /* EISA Timer */
+#define PNPtimer2 "PNP0102" /* MCA Timer */
+
+/* DMA controllers */
+
+#define PNPdma0 "PNP0200" /* AT DMA Controller */
+#define PNPdma1 "PNP0201" /* EISA DMA Controller */
+#define PNPdma2 "PNP0202" /* MCA DMA Controller */
+
+/* start of August 15, 1994 additions */
+/* CMOS */
+#define PNPCMOS "IBM0009" /* CMOS */
+
+/* L2 Cache */
+#define PNPL2 "IBM0007" /* L2 Cache */
+
+/* NVRAM */
+#define PNPNVRAM "IBM0008" /* NVRAM */
+
+/* Power Management */
+#define PNPPM "IBM0005" /* Power Management */
+/* end of August 15, 1994 additions */
+
+/* Keyboards */
+
+#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */
+#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */
+#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */
+#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */
+#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */
+#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */
+#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */
+#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */
+
+/* Parallel port controllers */
+
+#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */
+#define PNPparallel1 "PNP0401" /* ECP Parallel Port */
+#define PNPepp "IBM001C" /* EPP Parallel Port */
+
+/* Serial port controllers */
+
+#define PNPserial0 "PNP0500" /* Standard PC Serial port */
+#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */
+
+/* Disk controllers */
+
+#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */
+#define PNPdisk1 "PNP0601" /* Plus Hardcard II */
+#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */
+
+/* Diskette controllers */
+
+#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */
+
+/* Display controllers */
+
+#define PNPdisplay0 "PNP0900" /* VGA Compatible */
+#define PNPdisplay1 "PNP0901" /* Video Seven VGA */
+#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */
+#define PNPdisplay3 "PNP0903" /* Trident VGA */
+#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */
+#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */
+#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */
+#define PNPdisplay7 "PNP0907" /* Western Digital VGA */
+#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */
+#define PNPdisplay9 "PNP0909" /* S3 */
+#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */
+#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */
+#define PNPdisplayC "PNP090C" /* XGA Compatible */
+#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */
+#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */
+#define PNPdisplayF "PNP090F" /* Oak Technology VGA */
+
+/* Peripheral busses */
+
+#define PNPbuses0 "PNP0A00" /* ISA Bus */
+#define PNPbuses1 "PNP0A01" /* EISA Bus */
+#define PNPbuses2 "PNP0A02" /* MCA Bus */
+#define PNPbuses3 "PNP0A03" /* PCI Bus */
+#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */
+
+/* RTC, BIOS, planar devices */
+
+#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */
+#define PNPrtc0 "PNP0B00" /* AT RTC */
+#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */
+#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */
+#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */
+#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */
+
+/* PCMCIA controller */
+
+#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */
+
+/* Mice */
+
+#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */
+#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */
+#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */
+#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */
+#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */
+#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */
+#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */
+#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */
+#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */
+#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */
+#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */
+#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */
+
+/* Modems */
+
+#define PNPmodem0 "PNP9000" /* Specific IDs TBD */
+
+/* Network controllers */
+
+#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */
+#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */
+#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */
+#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */
+#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */
+#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */
+#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */
+#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */
+
+/* SCSI controllers */
+
+#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */
+#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */
+#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/
+#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */
+#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */
+#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */
+#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */
+
+/* Sound/Video, Multimedia */
+
+#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */
+#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */
+#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */
+#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */
+#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */
+#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */
+#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */
+#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */
+
+/* Operator Panel */
+#define PNPopctl "IBM000B" /* Operator's panel */
+
+/* Service Processor */
+#define PNPsp "IBM0011" /* IBM Service Processor */
+#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */
+#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */
+
+/* Memory Controller */
+#define PNPmemctl "IBM000A" /* Memory controller */
+
+/* Graphics Assist */
+#define PNPg_assist "IBM0014" /* Graphics Assist */
+
+/* Miscellaneous Device Controllers */
+#define PNPtablet "IBM0019" /* IBM Tablet Controller */
+
+/* PNP Packet Handles */
+
+#define S1_Packet 0x0A /* Version resource */
+#define S2_Packet 0x15 /* Logical DEVID (without flags) */
+#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */
+#define S3_Packet 0x1C /* Compatible device ID */
+#define S4_Packet 0x22 /* IRQ resource (without flags) */
+#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */
+#define S5_Packet 0x2A /* DMA resource */
+#define S6_Packet 0x30 /* Depend funct start (w/o priority) */
+#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */
+#define S7_Packet 0x38 /* Depend funct end */
+#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */
+#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */
+#define S14_Packet 0x71 /* Vendor defined */
+#define S15_Packet 0x78 /* End of resource (w/o checksum) */
+#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */
+#define L1_Packet 0x81 /* Memory range */
+#define L1_Shadow 0x20 /* Memory is shadowable */
+#define L1_32bit_mem 0x18 /* 32-bit memory only */
+#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */
+#define L1_Decode_Hi 0x04 /* decode supports high address */
+#define L1_Cache 0x02 /* read cacheable, write-through */
+#define L1_Writeable 0x01 /* Memory is writeable */
+#define L2_Packet 0x82 /* ANSI ID string */
+#define L3_Packet 0x83 /* Unicode ID string */
+#define L4_Packet 0x84 /* Vendor defined */
+#define L5_Packet 0x85 /* Large I/O */
+#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */
+#define END_TAG 0x78 /* End of resource */
+#define DF_START_TAG 0x30 /* Dependent function start */
+#define DF_START_TAG_priority 0x31 /* Dependent function start */
+#define DF_END_TAG 0x38 /* Dependent function end */
+#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */
+
+/* Device Base Type Codes */
+
+typedef enum _PnP_BASE_TYPE {
+ Reserved = 0,
+ MassStorageDevice = 1,
+ NetworkInterfaceController = 2,
+ DisplayController = 3,
+ MultimediaController = 4,
+ MemoryController = 5,
+ BridgeController = 6,
+ CommunicationsDevice = 7,
+ SystemPeripheral = 8,
+ InputDevice = 9,
+ ServiceProcessor = 0x0A, /* 11/2/95 */
+ } PnP_BASE_TYPE;
+
+/* Device Sub Type Codes */
+
+typedef enum _PnP_SUB_TYPE {
+ SCSIController = 0,
+ IDEController = 1,
+ FloppyController = 2,
+ IPIController = 3,
+ OtherMassStorageController = 0x80,
+
+ EthernetController = 0,
+ TokenRingController = 1,
+ FDDIController = 2,
+ OtherNetworkController = 0x80,
+
+ VGAController= 0,
+ SVGAController= 1,
+ XGAController= 2,
+ OtherDisplayController = 0x80,
+
+ VideoController = 0,
+ AudioController = 1,
+ OtherMultimediaController = 0x80,
+
+ RAM = 0,
+ FLASH = 1,
+ OtherMemoryDevice = 0x80,
+
+ HostProcessorBridge = 0,
+ ISABridge = 1,
+ EISABridge = 2,
+ MicroChannelBridge = 3,
+ PCIBridge = 4,
+ PCMCIABridge = 5,
+ VMEBridge = 6,
+ OtherBridgeDevice = 0x80,
+
+ RS232Device = 0,
+ ATCompatibleParallelPort = 1,
+ OtherCommunicationsDevice = 0x80,
+
+ ProgrammableInterruptController = 0,
+ DMAController = 1,
+ SystemTimer = 2,
+ RealTimeClock = 3,
+ L2Cache = 4,
+ NVRAM = 5,
+ PowerManagement = 6,
+ CMOS = 7,
+ OperatorPanel = 8,
+ ServiceProcessorClass1 = 9,
+ ServiceProcessorClass2 = 0xA,
+ ServiceProcessorClass3 = 0xB,
+ GraphicAssist = 0xC,
+ SystemPlanar = 0xF, /* 10/5/95 */
+ OtherSystemPeripheral = 0x80,
+
+ KeyboardController = 0,
+ Digitizer = 1,
+ MouseController = 2,
+ TabletController = 3, /* 10/27/95 */
+ OtherInputController = 0x80,
+
+ GeneralMemoryController = 0,
+ } PnP_SUB_TYPE;
+
+/* Device Interface Type Codes */
+
+typedef enum _PnP_INTERFACE {
+ General = 0,
+ GeneralSCSI = 0,
+ GeneralIDE = 0,
+ ATACompatible = 1,
+
+ GeneralFloppy = 0,
+ Compatible765 = 1,
+ NS398_Floppy = 2, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26E_Floppy = 3, /* Ports 26E and 26F */
+ NS15C_Floppy = 4, /* Ports 15C and 15D */
+ NS2E_Floppy = 5, /* Ports 2E and 2F */
+ CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */
+
+ GeneralIPI = 0,
+
+ GeneralEther = 0,
+ GeneralToken = 0,
+ GeneralFDDI = 0,
+
+ GeneralVGA = 0,
+ GeneralSVGA = 0,
+ GeneralXGA = 0,
+
+ GeneralVideo = 0,
+ GeneralAudio = 0,
+ CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */
+
+ GeneralRAM = 0,
+ GeneralFLASH = 0,
+ PCIMemoryController = 0, /* PCI Config Method */
+ RS6KMemoryController = 1, /* RS6K Config Method */
+
+ GeneralHostBridge = 0,
+ GeneralISABridge = 0,
+ GeneralEISABridge = 0,
+ GeneralMCABridge = 0,
+ GeneralPCIBridge = 0,
+ PCIBridgeDirect = 0,
+ PCIBridgeIndirect = 1,
+ PCIBridgeRS6K = 2,
+ GeneralPCMCIABridge = 0,
+ GeneralVMEBridge = 0,
+
+ GeneralRS232 = 0,
+ COMx = 1,
+ Compatible16450 = 2,
+ Compatible16550 = 3,
+ NS398SerPort = 4, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26ESerPort = 5, /* Ports 26E and 26F */
+ NS15CSerPort = 6, /* Ports 15C and 15D */
+ NS2ESerPort = 7, /* Ports 2E and 2F */
+
+ GeneralParPort = 0,
+ LPTx = 1,
+ NS398ParPort = 2, /* NS Super I/O wired to use index
+ register at port 398 and data
+ register at port 399 */
+ NS26EParPort = 3, /* Ports 26E and 26F */
+ NS15CParPort = 4, /* Ports 15C and 15D */
+ NS2EParPort = 5, /* Ports 2E and 2F */
+
+ GeneralPIC = 0,
+ ISA_PIC = 1,
+ EISA_PIC = 2,
+ MPIC = 3,
+ RS6K_PIC = 4,
+
+ GeneralDMA = 0,
+ ISA_DMA = 1,
+ EISA_DMA = 2,
+
+ GeneralTimer = 0,
+ ISA_Timer = 1,
+ EISA_Timer = 2,
+ GeneralRTC = 0,
+ ISA_RTC = 1,
+
+ StoreThruOnly = 1,
+ StoreInEnabled = 2,
+ RS6KL2Cache = 3,
+
+ IndirectNVRAM = 0, /* Indirectly addressed */
+ DirectNVRAM = 1, /* Memory Mapped */
+ IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */
+
+ GeneralPowerManagement = 0,
+ EPOWPowerManagement = 1,
+ PowerControl = 2, /* d1378 */
+
+ GeneralCMOS = 0,
+
+ GeneralOPPanel = 0,
+ HarddiskLight = 1,
+ CDROMLight = 2,
+ PowerLight = 3,
+ KeyLock = 4,
+ ANDisplay = 5, /* AlphaNumeric Display */
+ SystemStatusLED = 6, /* 3 digit 7 segment LED */
+ CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */
+
+ GeneralServiceProcessor = 0,
+
+ TransferData = 1,
+ IGMC32 = 2,
+ IGMC64 = 3,
+
+ GeneralSystemPlanar = 0, /* 10/5/95 */
+
+ } PnP_INTERFACE;
+
+/* PnP resources */
+
+/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
+
+typedef struct _SERIAL_ID {
+ unsigned char VendorID0; /* Bit(7)=0 */
+ /* Bits(6:2)=1st character in */
+ /* compressed ASCII */
+ /* Bits(1:0)=2nd character in */
+ /* compressed ASCII bits(4:3) */
+ unsigned char VendorID1; /* Bits(7:5)=2nd character in */
+ /* compressed ASCII bits(2:0) */
+ /* Bits(4:0)=3rd character in */
+ /* compressed ASCII */
+ unsigned char VendorID2; /* Product number - vendor assigned */
+ unsigned char VendorID3; /* Product number - vendor assigned */
+
+/* Serial number is to provide uniqueness if more than one board of same */
+/* type is in system. Must be "FFFFFFFF" if feature not supported. */
+
+ unsigned char Serial0; /* Unique serial number bits (7:0) */
+ unsigned char Serial1; /* Unique serial number bits (15:8) */
+ unsigned char Serial2; /* Unique serial number bits (23:16) */
+ unsigned char Serial3; /* Unique serial number bits (31:24) */
+ unsigned char Checksum;
+ } SERIAL_ID;
+
+typedef enum _PnPItemName {
+ Unused = 0,
+ PnPVersion = 1,
+ LogicalDevice = 2,
+ CompatibleDevice = 3,
+ IRQFormat = 4,
+ DMAFormat = 5,
+ StartDepFunc = 6,
+ EndDepFunc = 7,
+ IOPort = 8,
+ FixedIOPort = 9,
+ Res1 = 10,
+ Res2 = 11,
+ Res3 = 12,
+ SmallVendorItem = 14,
+ EndTag = 15,
+ MemoryRange = 1,
+ ANSIIdentifier = 2,
+ UnicodeIdentifier = 3,
+ LargeVendorItem = 4,
+ MemoryRange32 = 5,
+ MemoryRangeFixed32 = 6,
+ } PnPItemName;
+
+/* Define a bunch of access functions for the bits in the tag field */
+
+/* Tag type - 0 = small; 1 = large */
+#define tag_type(t) (((t) & 0x80)>>7)
+#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
+
+/* Small item name is 4 bits - one of PnPItemName enum above */
+#define tag_small_item_name(t) (((t) & 0x78)>>3)
+#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
+
+/* Small item count is 3 bits - count of further bytes in packet */
+#define tag_small_count(t) ((t) & 0x07)
+#define set_tag_count(t,v) (t = (t & 0x78) | (v))
+
+/* Large item name is 7 bits - one of PnPItemName enum above */
+#define tag_large_item_name(t) ((t) & 0x7f)
+#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
+
+/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
+
+typedef union _PnP_TAG_PACKET {
+ struct _S1_Pack{ /* VERSION PACKET */
+ unsigned char Tag; /* small tag = 0x0a */
+ unsigned char Version[2]; /* PnP version, Vendor version */
+ } S1_Pack;
+
+ struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */
+ unsigned char Tag; /* small tag = 0x15 or 0x16 */
+ unsigned char DevId[4]; /* Logical device id */
+ unsigned char Flags[2]; /* bit(0) boot device; */
+ /* bit(7:1) cmd in range x31-x37 */
+ /* bit(7:0) cmd in range x28-x3f (opt)*/
+ } S2_Pack;
+
+ struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */
+ unsigned char Tag; /* small tag = 0x1c */
+ unsigned char CompatId[4]; /* Compatible device id */
+ } S3_Pack;
+
+ struct _S4_Pack{ /* IRQ PACKET */
+ unsigned char Tag; /* small tag = 0x22 or 0x23 */
+ unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */
+ /* bit(0) is IRQ8 ... */
+ unsigned char IRQInfo; /* optional; assume bit(0)=1; else */
+ /* bit(0) - high true edge sensitive */
+ /* bit(1) - low true edge sensitive */
+ /* bit(2) - high true level sensitive*/
+ /* bit(3) - low true level sensitive */
+ /* bit(7:4) - must be 0 */
+ } S4_Pack;
+
+ struct _S5_Pack{ /* DMA PACKET */
+ unsigned char Tag; /* small tag = 0x2a */
+ unsigned char DMAMask; /* bit(0) is channel 0 ... */
+ unsigned char DMAInfo;
+ } S5_Pack;
+
+ struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */
+ unsigned char Tag; /* small tag = 0x30 or 0x31 */
+ unsigned char Priority; /* Optional; if missing then x01; else*/
+ /* x00 = best possible */
+ /* x01 = acceptible */
+ /* x02 = sub-optimal but functional */
+ } S6_Pack;
+
+ struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */
+ unsigned char Tag; /* small tag = 0x38 */
+ } S7_Pack;
+
+ struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */
+ unsigned char Tag; /* small tag x47 */
+ unsigned char IOInfo; /* x0 = decode only bits(9:0); */
+#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */
+ unsigned char RangeMin[2]; /* Min base address */
+ unsigned char RangeMax[2]; /* Max base address */
+ unsigned char IOAlign; /* base alignmt, incr in 1B blocks */
+ unsigned char IONum; /* number of contiguous I/O ports */
+ } S8_Pack;
+
+ struct _S9_Pack{ /* FIXED I/O PORT PACKET */
+ unsigned char Tag; /* small tag = 0x4b */
+ unsigned char Range[2]; /* base address 10 bits */
+ unsigned char IONum; /* number of contiguous I/O ports */
+ } S9_Pack;
+
+ struct _S14_Pack{ /* VENDOR DEFINED PACKET */
+ unsigned char Tag; /* small tag = 0x7m m = 1-7 */
+ union _S14_Data{
+ unsigned char Data[7]; /* Vendor defined */
+ struct _S14_PPCPack{ /* Pr*p s14 pack */
+ unsigned char Type; /* 00=non-IBM */
+ unsigned char PPCData[6]; /* Vendor defined */
+ } S14_PPCPack;
+ } S14_Data;
+ } S14_Pack;
+
+ struct _S15_Pack{ /* END PACKET */
+ unsigned char Tag; /* small tag = 0x78 or 0x79 */
+ unsigned char Check; /* optional - checksum */
+ } S15_Pack;
+
+ struct _L1_Pack{ /* MEMORY RANGE PACKET */
+ unsigned char Tag; /* large tag = 0x81 */
+ unsigned char Count0; /* x09 */
+ unsigned char Count1; /* x00 */
+ unsigned char Data[9]; /* a variable array of bytes, */
+ /* count in tag */
+ } L1_Pack;
+
+ struct _L2_Pack{ /* ANSI ID STRING PACKET */
+ unsigned char Tag; /* large tag = 0x82 */
+ unsigned char Count0; /* Length of string */
+ unsigned char Count1;
+ unsigned char Identifier[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L2_Pack;
+
+ struct _L3_Pack{ /* UNICODE ID STRING PACKET */
+ unsigned char Tag; /* large tag = 0x83 */
+ unsigned char Count0; /* Length + 2 of string */
+ unsigned char Count1;
+ unsigned char Country0; /* TBD */
+ unsigned char Country1; /* TBD */
+ unsigned char Identifier[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L3_Pack;
+
+ struct _L4_Pack{ /* VENDOR DEFINED PACKET */
+ unsigned char Tag; /* large tag = 0x84 */
+ unsigned char Count0;
+ unsigned char Count1;
+ union _L4_Data{
+ unsigned char Data[1]; /* a variable array of bytes, */
+ /* count in tag */
+ struct _L4_PPCPack{ /* Pr*p L4 packet */
+ unsigned char Type; /* 00=non-IBM */
+ unsigned char PPCData[1]; /* a variable array of bytes, */
+ /* count in tag */
+ } L4_PPCPack;
+ } L4_Data;
+ } L4_Pack;
+
+ struct _L5_Pack{
+ unsigned char Tag; /* large tag = 0x85 */
+ unsigned char Count0; /* Count = 17 */
+ unsigned char Count1;
+ unsigned char Data[17];
+ } L5_Pack;
+
+ struct _L6_Pack{
+ unsigned char Tag; /* large tag = 0x86 */
+ unsigned char Count0; /* Count = 9 */
+ unsigned char Count1;
+ unsigned char Data[9];
+ } L6_Pack;
+
+ } PnP_TAG_PACKET;
+
+#endif /* __ASSEMBLY__ */
+#endif /* ndef _PNP_ */
--- /dev/null
+#ifndef _PPC_POSIX_TYPES_H
+#define _PPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int __kernel_dev_t;
+typedef unsigned int __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_uid_t;
+typedef unsigned int __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define __FD_ZERO(set) \
+ ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+ || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+ unsigned int *tmp = (unsigned int *)p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 8:
+ tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
+ tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _PPC_POSIX_TYPES_H */
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC4xx_EBC_H_
+#define _PPC4xx_EBC_H_
+
+/*
+ * Currently there are two register layout versions for the IBM EBC core
+ * used on 4xx PPC's. The following grouping lists the first layout.
+ * Within this group there is a slight variation concerning the bit field
+ * position of the EMPL and EMPH fields:
+ */
+#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
+ defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define CONFIG_EBC_PPC4xx_IBM_VER1
+#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
+ defined(CONFIG_405EP)
+#define EBC_CFG_EMPH_POS 8
+#define EBC_CFG_EMPL_POS 6
+#else
+#define EBC_CFG_EMPH_POS 6
+#define EBC_CFG_EMPL_POS 8
+#endif
+#endif
+
+/*
+ * Define the max number of EBC banks (chip selects)
+ */
+#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
+ defined(CONFIG_405EZ) || \
+ defined(CONFIG_440GP) || defined(CONFIG_440GX)
+#define EBC_NUM_BANKS 8
+#endif
+
+#if defined(CONFIG_405EP)
+#define EBC_NUM_BANKS 5
+#endif
+
+#if defined(CONFIG_405EX) || \
+ defined(CONFIG_460SX)
+#define EBC_NUM_BANKS 4
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define EBC_NUM_BANKS 6
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define EBC_NUM_BANKS 3
+#endif
+
+/* Bank Configuration Register */
+#define EBC_BXCR(n) (n)
+#define EBC_BXCR_BANK_SIZE(n) (0x100000 << (((n) & EBC_BXCR_BS_MASK) >> 17))
+
+#define EBC_BXCR_BAS_MASK PPC_REG_VAL(11, 0xFFF)
+#define EBC_BXCR_BAS_ENCODE(n) (((static_cast(u32, n)) & EBC_BXCR_BAS_MASK))
+#define EBC_BXCR_BS_MASK PPC_REG_VAL(14, 0x7)
+#define EBC_BXCR_BS_1MB PPC_REG_VAL(14, 0x0)
+#define EBC_BXCR_BS_2MB PPC_REG_VAL(14, 0x1)
+#define EBC_BXCR_BS_4MB PPC_REG_VAL(14, 0x2)
+#define EBC_BXCR_BS_8MB PPC_REG_VAL(14, 0x3)
+#define EBC_BXCR_BS_16MB PPC_REG_VAL(14, 0x4)
+#define EBC_BXCR_BS_32MB PPC_REG_VAL(14, 0x5)
+#define EBC_BXCR_BS_64MB PPC_REG_VAL(14, 0x6)
+#define EBC_BXCR_BS_128MB PPC_REG_VAL(14, 0x7)
+#define EBC_BXCR_BU_MASK PPC_REG_VAL(16, 0x3)
+#define EBC_BXCR_BU_NONE PPC_REG_VAL(16, 0x0)
+#define EBC_BXCR_BU_R PPC_REG_VAL(16, 0x1)
+#define EBC_BXCR_BU_W PPC_REG_VAL(16, 0x2)
+#define EBC_BXCR_BU_RW PPC_REG_VAL(16, 0x3)
+#define EBC_BXCR_BW_MASK PPC_REG_VAL(18, 0x3)
+#define EBC_BXCR_BW_8BIT PPC_REG_VAL(18, 0x0)
+#define EBC_BXCR_BW_16BIT PPC_REG_VAL(18, 0x1)
+#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
+#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x2)
+#else
+#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x3)
+#endif
+
+/* Bank Access Parameter Register */
+#define EBC_BXAP_BME_ENABLED PPC_REG_VAL(0, 0x1)
+#define EBC_BXAP_BME_DISABLED PPC_REG_VAL(0, 0x0)
+#define EBC_BXAP_TWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0xFF)
+#define EBC_BXAP_FWT_ENCODE(n) PPC_REG_VAL(5, (static_cast(u32, n)) & 0x1F)
+#define EBC_BXAP_BWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0x7)
+#define EBC_BXAP_BCE_DISABLE PPC_REG_VAL(9, 0x0)
+#define EBC_BXAP_BCE_ENABLE PPC_REG_VAL(9, 0x1)
+#define EBC_BXAP_BCT_MASK PPC_REG_VAL(11, 0x3)
+#define EBC_BXAP_BCT_2TRANS PPC_REG_VAL(11, 0x0)
+#define EBC_BXAP_BCT_4TRANS PPC_REG_VAL(11, 0x1)
+#define EBC_BXAP_BCT_8TRANS PPC_REG_VAL(11, 0x2)
+#define EBC_BXAP_BCT_16TRANS PPC_REG_VAL(11, 0x3)
+#define EBC_BXAP_CSN_ENCODE(n) PPC_REG_VAL(13, (static_cast(u32, n)) & 0x3)
+#define EBC_BXAP_OEN_ENCODE(n) PPC_REG_VAL(15, (static_cast(u32, n)) & 0x3)
+#define EBC_BXAP_WBN_ENCODE(n) PPC_REG_VAL(17, (static_cast(u32, n)) & 0x3)
+#define EBC_BXAP_WBF_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x3)
+#define EBC_BXAP_TH_ENCODE(n) PPC_REG_VAL(22, (static_cast(u32, n)) & 0x7)
+#define EBC_BXAP_RE_ENABLED PPC_REG_VAL(23, 0x1)
+#define EBC_BXAP_RE_DISABLED PPC_REG_VAL(23, 0x0)
+#define EBC_BXAP_SOR_DELAYED PPC_REG_VAL(24, 0x0)
+#define EBC_BXAP_SOR_NONDELAYED PPC_REG_VAL(24, 0x1)
+#define EBC_BXAP_BEM_WRITEONLY PPC_REG_VAL(25, 0x0)
+#define EBC_BXAP_BEM_RW PPC_REG_VAL(25, 0x1)
+#define EBC_BXAP_PEN_DISABLED PPC_REG_VAL(26, 0x0)
+#define EBC_BXAP_PEN_ENABLED PPC_REG_VAL(26, 0x1)
+
+/* Common fields in EBC0_CFG register */
+#define EBC_CFG_PTD_MASK PPC_REG_VAL(1, 0x1)
+#define EBC_CFG_PTD_ENABLE PPC_REG_VAL(1, 0x0)
+#define EBC_CFG_PTD_DISABLE PPC_REG_VAL(1, 0x1)
+#define EBC_CFG_RTC_MASK PPC_REG_VAL(4, 0x7)
+#define EBC_CFG_RTC_16PERCLK PPC_REG_VAL(4, 0x0)
+#define EBC_CFG_RTC_32PERCLK PPC_REG_VAL(4, 0x1)
+#define EBC_CFG_RTC_64PERCLK PPC_REG_VAL(4, 0x2)
+#define EBC_CFG_RTC_128PERCLK PPC_REG_VAL(4, 0x3)
+#define EBC_CFG_RTC_256PERCLK PPC_REG_VAL(4, 0x4)
+#define EBC_CFG_RTC_512PERCLK PPC_REG_VAL(4, 0x5)
+#define EBC_CFG_RTC_1024PERCLK PPC_REG_VAL(4, 0x6)
+#define EBC_CFG_RTC_2048PERCLK PPC_REG_VAL(4, 0x7)
+#define EBC_CFG_PME_MASK PPC_REG_VAL(14, 0x1)
+#define EBC_CFG_PME_DISABLE PPC_REG_VAL(14, 0x0)
+#define EBC_CFG_PME_ENABLE PPC_REG_VAL(14, 0x1)
+#define EBC_CFG_PMT_MASK PPC_REG_VAL(19, 0x1F)
+#define EBC_CFG_PMT_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x1F)
+
+/* Now the two versions of the other bits */
+#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
+#define EBC_CFG_EBTC_MASK PPC_REG_VAL(0, 0x1)
+#define EBC_CFG_EBTC_HI PPC_REG_VAL(0, 0x0)
+#define EBC_CFG_EBTC_DRIVEN PPC_REG_VAL(0, 0x1)
+#define EBC_CFG_EMPH_MASK PPC_REG_VAL(EBC_CFG_EMPH_POS, 0x3)
+#define EBC_CFG_EMPH_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
+ (static_cast(u32, n)) & 0x3)
+#define EBC_CFG_EMPL_MASK PPC_REG_VAL(EBC_CFG_EMPL_POS, 0x3)
+#define EBC_CFG_EMPL_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
+ (static_cast(u32, n)) & 0x3)
+#define EBC_CFG_CSTC_MASK PPC_REG_VAL(9, 0x1)
+#define EBC_CFG_CSTC_HI PPC_REG_VAL(9, 0x0)
+#define EBC_CFG_CSTC_DRIVEN PPC_REG_VAL(9, 0x1)
+#define EBC_CFG_BPR_MASK PPC_REG_VAL(11, 0x3)
+#define EBC_CFG_BPR_1DW PPC_REG_VAL(11, 0x0)
+#define EBC_CFG_BPR_2DW PPC_REG_VAL(11, 0x1)
+#define EBC_CFG_BPR_4DW PPC_REG_VAL(11, 0x2)
+#define EBC_CFG_EMS_MASK PPC_REG_VAL(13, 0x3)
+#define EBC_CFG_EMS_8BIT PPC_REG_VAL(13, 0x0)
+#define EBC_CFG_EMS_16BIT PPC_REG_VAL(13, 0x1)
+#define EBC_CFG_EMS_32BIT PPC_REG_VAL(13, 0x2)
+#else
+#define EBC_CFG_LE_MASK PPC_REG_VAL(0, 0x1)
+#define EBC_CFG_LE_UNLOCK PPC_REG_VAL(0, 0x0)
+#define EBC_CFG_LE_LOCK PPC_REG_VAL(0, 0x1)
+#define EBC_CFG_ATC_MASK PPC_REG_VAL(5, 0x1)
+#define EBC_CFG_ATC_HI PPC_REG_VAL(5, 0x0)
+#define EBC_CFG_ATC_PREVIOUS PPC_REG_VAL(5, 0x1)
+#define EBC_CFG_DTC_MASK PPC_REG_VAL(6, 0x1)
+#define EBC_CFG_DTC_HI PPC_REG_VAL(6, 0x0)
+#define EBC_CFG_DTC_PREVIOUS PPC_REG_VAL(6, 0x1)
+#define EBC_CFG_CTC_MASK PPC_REG_VAL(7, 0x1)
+#define EBC_CFG_CTC_HI PPC_REG_VAL(7, 0x0)
+#define EBC_CFG_CTC_PREVIOUS PPC_REG_VAL(7, 0x1)
+#define EBC_CFG_OEO_MASK PPC_REG_VAL(8, 0x1)
+#define EBC_CFG_OEO_HI PPC_REG_VAL(8, 0x0)
+#define EBC_CFG_OEO_PREVIOUS PPC_REG_VAL(8, 0x1)
+#define EBC_CFG_EMC_MASK PPC_REG_VAL(9, 0x1)
+#define EBC_CFG_EMC_NONDEFAULT PPC_REG_VAL(9, 0x0)
+#define EBC_CFG_EMC_DEFAULT PPC_REG_VAL(9, 0x1)
+#define EBC_CFG_PR_MASK PPC_REG_VAL(21, 0x3)
+#define EBC_CFG_PR_16 PPC_REG_VAL(21, 0x0)
+#define EBC_CFG_PR_32 PPC_REG_VAL(21, 0x1)
+#define EBC_CFG_PR_64 PPC_REG_VAL(21, 0x2)
+#define EBC_CFG_PR_128 PPC_REG_VAL(21, 0x3)
+#endif
+
+#endif /* _PPC4xx_EBC_H_ */
--- /dev/null
+
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC4xx_ISRAM_H_
+#define _PPC4xx_ISRAM_H_
+
+/*
+ * Internal SRAM
+ */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define ISRAM0_DCR_BASE 0x380
+#else
+#define ISRAM0_DCR_BASE 0x020
+#endif
+#define ISRAM0_SB0CR (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define ISRAM0_SB1CR (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
+#define ISRAM0_SB2CR (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
+#define ISRAM0_SB3CR (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
+#define ISRAM0_BEAR (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define ISRAM0_BESR0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define ISRAM0_BESR1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define ISRAM0_PMEG (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define ISRAM0_CID (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define ISRAM1_DCR_BASE 0x0B0
+#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/
+#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */
+#define ISRAM1_BESR0 (ISRAM1_DCR_BASE+0x05) /* SRAM1 bus error status reg 0 */
+#define ISRAM1_BESR1 (ISRAM1_DCR_BASE+0x06) /* SRAM1 bus error status reg 1 */
+#define ISRAM1_PMEG (ISRAM1_DCR_BASE+0x07) /* SRAM1 power management */
+#define ISRAM1_CID (ISRAM1_DCR_BASE+0x08) /* SRAM1 bus core id reg */
+#define ISRAM1_REVID (ISRAM1_DCR_BASE+0x09) /* SRAM1 bus revision id reg */
+#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */
+#endif /* CONFIG_460EX || CONFIG_460GT */
+
+/*
+ * L2 Cache
+ */
+#if defined (CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+#define L2_CACHE_BASE 0x030
+#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */
+#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */
+#define L2_CACHE_ADDR (L2_CACHE_BASE+0x02) /* L2 Cache Address */
+#define L2_CACHE_DATA (L2_CACHE_BASE+0x03) /* L2 Cache Data */
+#define L2_CACHE_STAT (L2_CACHE_BASE+0x04) /* L2 Cache Status */
+#define L2_CACHE_CVER (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
+#define L2_CACHE_SNP0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
+#define L2_CACHE_SNP1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+#endif /* CONFIG_440GX */
+
+#endif /* _PPC4xx_ISRAM_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC4xx_SDRAM_H_
+#define _PPC4xx_SDRAM_H_
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_SDRAM)
+
+/*
+ * SDRAM Controller
+ */
+
+#ifndef CONFIG_405EP
+#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */
+#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */
+#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */
+#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */
+#define SDRAM0_BEAR 0x10 /* bus error address reg */
+#endif
+#define SDRAM0_CFG 0x20 /* memory controller options 1 */
+#define SDRAM0_STATUS 0x24 /* memory status */
+#define SDRAM0_RTR 0x30 /* refresh timer reg */
+#define SDRAM0_PMIT 0x34 /* power management idle timer */
+#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */
+#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */
+#ifndef CONFIG_405EP
+#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */
+#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */
+#endif
+#define SDRAM0_TR 0x80 /* timing reg 1 */
+#ifndef CONFIG_405EP
+#define SDRAM0_ECCCFG 0x94 /* ECC configuration */
+#define SDRAM0_ECCESR 0x98 /* ECC error status */
+#endif
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+
+/*
+ * Memory controller registers
+ */
+#define SDRAM_CFG0 0x20 /* memory controller options 0 */
+#define SDRAM_CFG1 0x21 /* memory controller options 1 */
+
+#define SDRAM0_BEAR 0x0010 /* bus error address reg */
+#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */
+#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */
+#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */
+#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */
+#define SDRAM0_MCSTS 0x0024 /* memory controller status */
+#define SDRAM0_RTR 0x0030 /* refresh timer register */
+#define SDRAM0_PMIT 0x0034 /* power management idle timer */
+#define SDRAM0_UABBA 0x0038 /* plb UABus base address */
+#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */
+#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */
+#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */
+#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */
+#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */
+#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */
+#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */
+#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */
+#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */
+#define SDRAM0_ECCESR 0x0098 /* ECC error status */
+
+/*
+ * Memory Controller Options 0
+ */
+#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
+#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
+#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
+#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
+
+/*
+ * Memory Controller Options 1
+ */
+#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
+#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
+
+/*
+ * SDRAM DEVPOT Options
+ */
+#define SDRAM_DEVOPT_DLL 0x80000000
+#define SDRAM_DEVOPT_DS 0x40000000
+
+/*
+ * SDRAM MCSTS Options
+ */
+#define SDRAM_MCSTS_MRSC 0x80000000
+#define SDRAM_MCSTS_SRMS 0x40000000
+#define SDRAM_MCSTS_CIS 0x20000000
+#define SDRAM_MCSTS_IDLE_NOT 0x00000000 /* Mem contr not idle */
+
+/*
+ * SDRAM Refresh Timer Register
+ */
+#define SDRAM_RTR_RINT_MASK 0xFFFF0000
+#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
+
+/*
+ * SDRAM UABus Base Address Reg
+ */
+#define SDRAM_UABBA_UBBA_MASK 0x0000000F
+
+/*
+ * Memory Bank 0-7 configuration
+ */
+#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
+#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
+#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
+#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
+#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
+#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
+#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
+#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
+#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
+#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
+#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
+#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
+#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
+#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
+#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
+
+/*
+ * SDRAM TR0 Options
+ */
+#define SDRAM_TR0_SDWR_MASK 0x80000000
+#define SDRAM_TR0_SDWR_2_CLK 0x00000000
+#define SDRAM_TR0_SDWR_3_CLK 0x80000000
+#define SDRAM_TR0_SDWD_MASK 0x40000000
+#define SDRAM_TR0_SDWD_0_CLK 0x00000000
+#define SDRAM_TR0_SDWD_1_CLK 0x40000000
+#define SDRAM_TR0_SDCL_MASK 0x01800000
+#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
+#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
+#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
+#define SDRAM_TR0_SDPA_MASK 0x000C0000
+#define SDRAM_TR0_SDPA_2_CLK 0x00040000
+#define SDRAM_TR0_SDPA_3_CLK 0x00080000
+#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
+#define SDRAM_TR0_SDCP_MASK 0x00030000
+#define SDRAM_TR0_SDCP_2_CLK 0x00000000
+#define SDRAM_TR0_SDCP_3_CLK 0x00010000
+#define SDRAM_TR0_SDCP_4_CLK 0x00020000
+#define SDRAM_TR0_SDCP_5_CLK 0x00030000
+#define SDRAM_TR0_SDLD_MASK 0x0000C000
+#define SDRAM_TR0_SDLD_1_CLK 0x00000000
+#define SDRAM_TR0_SDLD_2_CLK 0x00004000
+#define SDRAM_TR0_SDRA_MASK 0x0000001C
+#define SDRAM_TR0_SDRA_6_CLK 0x00000000
+#define SDRAM_TR0_SDRA_7_CLK 0x00000004
+#define SDRAM_TR0_SDRA_8_CLK 0x00000008
+#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
+#define SDRAM_TR0_SDRA_10_CLK 0x00000010
+#define SDRAM_TR0_SDRA_11_CLK 0x00000014
+#define SDRAM_TR0_SDRA_12_CLK 0x00000018
+#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
+#define SDRAM_TR0_SDRD_MASK 0x00000003
+#define SDRAM_TR0_SDRD_2_CLK 0x00000001
+#define SDRAM_TR0_SDRD_3_CLK 0x00000002
+#define SDRAM_TR0_SDRD_4_CLK 0x00000003
+
+/*
+ * SDRAM TR1 Options
+ */
+#define SDRAM_TR1_RDSS_MASK 0xC0000000
+#define SDRAM_TR1_RDSS_TR0 0x00000000
+#define SDRAM_TR1_RDSS_TR1 0x40000000
+#define SDRAM_TR1_RDSS_TR2 0x80000000
+#define SDRAM_TR1_RDSS_TR3 0xC0000000
+#define SDRAM_TR1_RDSL_MASK 0x00C00000
+#define SDRAM_TR1_RDSL_STAGE1 0x00000000
+#define SDRAM_TR1_RDSL_STAGE2 0x00400000
+#define SDRAM_TR1_RDSL_STAGE3 0x00800000
+#define SDRAM_TR1_RDCD_MASK 0x00000800
+#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
+#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
+#define SDRAM_TR1_RDCT_MASK 0x000001FF
+#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
+#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
+#define SDRAM_TR1_RDCT_MIN 0x00000000
+#define SDRAM_TR1_RDCT_MAX 0x000001FF
+
+/*
+ * SDRAM WDDCTR Options
+ */
+#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
+#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
+#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
+#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
+#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
+
+/*
+ * SDRAM CLKTR Options
+ */
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
+#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
+#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
+
+/*
+ * SDRAM DLYCAL Options
+ */
+#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR */
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+
+#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+#if !defined(CONFIG_405EX)
+/*
+ * Memory queue defines
+ */
+#define SDRAMQ_DCR_BASE 0x040
+
+#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
+#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
+#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
+#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
+#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
+#define SDRAM_CONF1HB_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
+#define SDRAM_CONF1HB_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
+#define SDRAM_CONF1HB_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
+#define SDRAM_CONF1HB_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
+#define SDRAM_CONF1HB_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
+#define SDRAM_CONF1HB_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
+#define SDRAM_CONF1HB_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
+#define SDRAM_CONF1HB_WRCL 0x00000080 /* MCIF Cycle Limit 1 - Bits 22..24 */
+#define SDRAM_CONF1HB_MASK 0x0000F380 /* RPLM & WRCL mask */
+
+#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
+#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
+#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
+#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
+#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
+#define SDRAM_CONF1LL_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
+#define SDRAM_CONF1LL_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
+#define SDRAM_CONF1LL_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
+#define SDRAM_CONF1LL_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
+#define SDRAM_CONF1LL_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
+#define SDRAM_CONF1LL_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
+#define SDRAM_CONF1LL_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
+#define SDRAM_CONF1LL_MASK 0x0000F000 /* RPLM mask */
+
+#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
+#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
+#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
+#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
+#define SDRAM_CONFPATHB_TPEN 0x08000000 /* Transaction Passing Enable - Bit 4 */
+
+#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
+
+/*
+ * Memory Bank 0-7 configuration
+ */
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
+#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
+#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2)
+#endif /* CONFIG_440SPE */
+#if defined(CONFIG_440SP)
+#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
+#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((u32)(n))&0xFF800000))
+#define SDRAM_RXBAS_SDBA_DECODE(n) ((((u32)(n))&0xFF800000))
+#endif /* CONFIG_440SP */
+#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
+#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((u32)(n))&0x3FF)<<6)
+#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((u32)(n))>>6)&0x3FF)
+#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
+#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
+#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
+#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
+#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
+#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
+#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
+#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
+#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
+#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
+#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
+#else /* CONFIG_405EX */
+/*
+ * XXX - ToDo:
+ * Revisit this file to check if all these 405EX defines are correct and
+ * can be used in the common 44x_spd_ddr2 code as well. sr, 2008-06-02
+ */
+#define SDRAM_RXBAS_SDSZ_MASK PPC_REG_VAL(19, 0xF)
+#define SDRAM_RXBAS_SDSZ_4MB PPC_REG_VAL(19, 0x0)
+#define SDRAM_RXBAS_SDSZ_8MB PPC_REG_VAL(19, 0x1)
+#define SDRAM_RXBAS_SDSZ_16MB PPC_REG_VAL(19, 0x2)
+#define SDRAM_RXBAS_SDSZ_32MB PPC_REG_VAL(19, 0x3)
+#define SDRAM_RXBAS_SDSZ_64MB PPC_REG_VAL(19, 0x4)
+#define SDRAM_RXBAS_SDSZ_128MB PPC_REG_VAL(19, 0x5)
+#define SDRAM_RXBAS_SDSZ_256MB PPC_REG_VAL(19, 0x6)
+#define SDRAM_RXBAS_SDSZ_512MB PPC_REG_VAL(19, 0x7)
+#define SDRAM_RXBAS_SDSZ_1024MB PPC_REG_VAL(19, 0x8)
+#define SDRAM_RXBAS_SDSZ_2048MB PPC_REG_VAL(19, 0x9)
+#define SDRAM_RXBAS_SDSZ_4096MB PPC_REG_VAL(19, 0xA)
+#define SDRAM_RXBAS_SDSZ_8192MB PPC_REG_VAL(19, 0xB)
+#define SDRAM_RXBAS_SDSZ_8 SDRAM_RXBAS_SDSZ_8MB
+#define SDRAM_RXBAS_SDSZ_16 SDRAM_RXBAS_SDSZ_16MB
+#define SDRAM_RXBAS_SDSZ_32 SDRAM_RXBAS_SDSZ_32MB
+#define SDRAM_RXBAS_SDSZ_64 SDRAM_RXBAS_SDSZ_64MB
+#define SDRAM_RXBAS_SDSZ_128 SDRAM_RXBAS_SDSZ_128MB
+#define SDRAM_RXBAS_SDSZ_256 SDRAM_RXBAS_SDSZ_256MB
+#define SDRAM_RXBAS_SDSZ_512 SDRAM_RXBAS_SDSZ_512MB
+#define SDRAM_RXBAS_SDSZ_1024 SDRAM_RXBAS_SDSZ_1024MB
+#define SDRAM_RXBAS_SDSZ_2048 SDRAM_RXBAS_SDSZ_2048MB
+#define SDRAM_RXBAS_SDSZ_4096 SDRAM_RXBAS_SDSZ_4096MB
+#define SDRAM_RXBAS_SDSZ_8192 SDRAM_RXBAS_SDSZ_8192MB
+#define SDRAM_RXBAS_SDAM_MODE0 PPC_REG_VAL(23, 0x0)
+#define SDRAM_RXBAS_SDAM_MODE1 PPC_REG_VAL(23, 0x1)
+#define SDRAM_RXBAS_SDAM_MODE2 PPC_REG_VAL(23, 0x2)
+#define SDRAM_RXBAS_SDAM_MODE3 PPC_REG_VAL(23, 0x3)
+#define SDRAM_RXBAS_SDAM_MODE4 PPC_REG_VAL(23, 0x4)
+#define SDRAM_RXBAS_SDAM_MODE5 PPC_REG_VAL(23, 0x5)
+#define SDRAM_RXBAS_SDAM_MODE6 PPC_REG_VAL(23, 0x6)
+#define SDRAM_RXBAS_SDAM_MODE7 PPC_REG_VAL(23, 0x7)
+#define SDRAM_RXBAS_SDAM_MODE8 PPC_REG_VAL(23, 0x8)
+#define SDRAM_RXBAS_SDAM_MODE9 PPC_REG_VAL(23, 0x9)
+#define SDRAM_RXBAS_SDBE_DISABLE PPC_REG_VAL(31, 0x0)
+#define SDRAM_RXBAS_SDBE_ENABLE PPC_REG_VAL(31, 0x1)
+#endif /* CONFIG_405EX */
+
+/*
+ * Memory controller registers
+ */
+#define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */
+#define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */
+#define SDRAM_BEARL 0x02 /* PLB bus error address low */
+#define SDRAM_BEARH 0x03 /* PLB bus error address high */
+#define SDRAM_WMIRQ 0x06 /* PLB write master interrupt (read/clear) */
+#define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */
+#define SDRAM_PLBOPT 0x08 /* PLB slave options */
+#define SDRAM_PUABA 0x09 /* PLB upper address base */
+#ifndef CONFIG_405EX
+#define SDRAM_MCSTAT 0x14 /* memory controller status */
+#else
+#define SDRAM_MCSTAT 0x1F /* memory controller status */
+#endif
+#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
+#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
+#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
+#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
+#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
+#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
+#define SDRAM_CODT 0x26 /* on die termination for controller */
+#define SDRAM_VVPR 0x27 /* variable VRef programmming */
+#define SDRAM_OPARS 0x28 /* on chip driver control setup */
+#define SDRAM_OPART 0x29 /* on chip driver control trigger */
+#define SDRAM_RTR 0x30 /* refresh timer */
+#define SDRAM_PMIT 0x34 /* power management idle timer */
+#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
+#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
+#define SDRAM_MB2CF 0x48
+#define SDRAM_MB3CF 0x4C
+#define SDRAM_INITPLR0 0x50 /* manual initialization control */
+#define SDRAM_INITPLR1 0x51 /* manual initialization control */
+#define SDRAM_INITPLR2 0x52 /* manual initialization control */
+#define SDRAM_INITPLR3 0x53 /* manual initialization control */
+#define SDRAM_INITPLR4 0x54 /* manual initialization control */
+#define SDRAM_INITPLR5 0x55 /* manual initialization control */
+#define SDRAM_INITPLR6 0x56 /* manual initialization control */
+#define SDRAM_INITPLR7 0x57 /* manual initialization control */
+#define SDRAM_INITPLR8 0x58 /* manual initialization control */
+#define SDRAM_INITPLR9 0x59 /* manual initialization control */
+#define SDRAM_INITPLR10 0x5a /* manual initialization control */
+#define SDRAM_INITPLR11 0x5b /* manual initialization control */
+#define SDRAM_INITPLR12 0x5c /* manual initialization control */
+#define SDRAM_INITPLR13 0x5d /* manual initialization control */
+#define SDRAM_INITPLR14 0x5e /* manual initialization control */
+#define SDRAM_INITPLR15 0x5f /* manual initialization control */
+#define SDRAM_RQDC 0x70 /* read DQS delay control */
+#define SDRAM_RFDC 0x74 /* read feedback delay control */
+#define SDRAM_RDCC 0x78 /* read data capture control */
+#define SDRAM_DLCR 0x7A /* delay line calibration */
+#define SDRAM_CLKTR 0x80 /* DDR clock timing */
+#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
+#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
+#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
+#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
+#define SDRAM_MMODE 0x88 /* memory mode */
+#define SDRAM_MEMODE 0x89 /* memory extended mode */
+#define SDRAM_ECCES 0x98 /* ECC error status */
+#define SDRAM_CID 0xA4 /* core ID */
+#ifndef CONFIG_405EX
+#define SDRAM_RID 0xA8 /* revision ID */
+#endif
+#define SDRAM_FCSR 0xB0 /* feedback calibration status */
+#define SDRAM_RTSR 0xB1 /* run time status tracking */
+#ifdef CONFIG_405EX
+#define SDRAM_RID 0xF8 /* revision ID */
+#endif
+
+/*
+ * Memory Controller Bus Error Status
+ */
+#define SDRAM_BESR_MASK PPC_REG_VAL(7, 0xFF)
+#define SDRAM_BESR_M0ID_MASK PPC_REG_VAL(3, 0xF)
+#define SDRAM_BESR_M0ID_ICU PPC_REG_VAL(3, 0x0)
+#define SDRAM_BESR_M0ID_PCIE0 PPC_REG_VAL(3, 0x1)
+#define SDRAM_BESR_M0ID_PCIE1 PPC_REG_VAL(3, 0x2)
+#define SDRAM_BESR_M0ID_DMA PPC_REG_VAL(3, 0x3)
+#define SDRAM_BESR_M0ID_DCU PPC_REG_VAL(3, 0x4)
+#define SDRAM_BESR_M0ID_OPB PPC_REG_VAL(3, 0x5)
+#define SDRAM_BESR_M0ID_MAL PPC_REG_VAL(3, 0x6)
+#define SDRAM_BESR_M0ID_SEC PPC_REG_VAL(3, 0x7)
+#define SDRAM_BESR_M0ET_MASK PPC_REG_VAL(6, 0x7)
+#define SDRAM_BESR_M0ET_NONE PPC_REG_VAL(6, 0x0)
+#define SDRAM_BESR_M0ET_ECC PPC_REG_VAL(6, 0x1)
+#define SDRAM_BESR_M0RW_WRITE PPC_REG_VAL(7, 0)
+#define SDRAM_BESR_M0RW_READ PPC_REG_VAL(8, 1)
+
+/*
+ * Memory Controller Status
+ */
+#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
+#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
+#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
+#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
+#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
+
+/*
+ * Memory Controller Options 1
+ */
+#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
+#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
+#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
+#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((u32)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
+#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
+#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
+#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
+#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
+#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
+#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
+#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
+#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
+#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
+#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
+#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
+#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
+#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
+#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
+#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
+#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
+#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
+#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
+#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
+#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
+#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
+#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
+
+/*
+ * Memory Controller Options 2
+ */
+#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
+#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
+#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
+#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
+#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
+#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
+#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
+#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
+#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
+#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
+#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
+#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
+#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
+
+/*
+ * SDRAM Refresh Timer Register
+ */
+#define SDRAM_RTR_RINT_MASK 0xFFF80000
+#define SDRAM_RTR_RINT_ENCODE(n) ((((u32)(n))&0xFFF8)<<16)
+#define SDRAM_RTR_RINT_DECODE(n) ((((u32)(n))>>16)&0xFFF8)
+
+/*
+ * SDRAM Read DQS Delay Control Register
+ */
+#define SDRAM_RQDC_RQDE_MASK 0x80000000
+#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
+#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
+#define SDRAM_RQDC_RQFD_MASK 0x000001FF
+#define SDRAM_RQDC_RQFD_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX 0x1FF
+
+/*
+ * SDRAM Read Data Capture Control Register
+ */
+#define SDRAM_RDCC_RDSS_MASK 0xC0000000
+#define SDRAM_RDCC_RDSS_T1 0x00000000
+#define SDRAM_RDCC_RDSS_T2 0x40000000
+#define SDRAM_RDCC_RDSS_T3 0x80000000
+#define SDRAM_RDCC_RDSS_T4 0xC0000000
+#define SDRAM_RDCC_RSAE_MASK 0x00000001
+#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
+#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
+#define SDRAM_RDCC_RDSS_ENCODE(n) ((((u32)(n))&0x03)<<30)
+#define SDRAM_RDCC_RDSS_DECODE(n) ((((u32)(n))>>30)&0x03)
+
+/*
+ * SDRAM Read Feedback Delay Control Register
+ */
+#define SDRAM_RFDC_ARSE_MASK 0x80000000
+#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
+#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
+#define SDRAM_RFDC_RFOS_MASK 0x007F0000
+#define SDRAM_RFDC_RFOS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK 0x000007FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((u32)(n))&0x7FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX 0x7FF
+
+/*
+ * SDRAM Delay Line Calibration Register
+ */
+#define SDRAM_DLCR_DCLM_MASK 0x80000000
+#define SDRAM_DLCR_DCLM_MANUAL 0x80000000
+#define SDRAM_DLCR_DCLM_AUTO 0x00000000
+#define SDRAM_DLCR_DLCR_MASK 0x08000000
+#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
+#define SDRAM_DLCR_DLCR_IDLE 0x00000000
+#define SDRAM_DLCR_DLCS_MASK 0x07000000
+#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
+#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
+#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
+#define SDRAM_DLCR_DLCS_ERROR 0x04000000
+#define SDRAM_DLCR_DLCV_MASK 0x000001FF
+#define SDRAM_DLCR_DLCV_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
+#define SDRAM_DLCR_DLCV_DECODE(n) ((((u32)(n))>>0)&0x1FF)
+
+/*
+ * SDRAM Memory On Die Terimination Control Register
+ */
+#define SDRAM_MODT_ODTON_DISABLE PPC_REG_VAL(0, 0)
+#define SDRAM_MODT_ODTON_ENABLE PPC_REG_VAL(0, 1)
+#define SDRAM_MODT_EB1W_DISABLE PPC_REG_VAL(1, 0)
+#define SDRAM_MODT_EB1W_ENABLE PPC_REG_VAL(1, 1)
+#define SDRAM_MODT_EB1R_DISABLE PPC_REG_VAL(2, 0)
+#define SDRAM_MODT_EB1R_ENABLE PPC_REG_VAL(2, 1)
+#define SDRAM_MODT_EB0W_DISABLE PPC_REG_VAL(7, 0)
+#define SDRAM_MODT_EB0W_ENABLE PPC_REG_VAL(7, 1)
+#define SDRAM_MODT_EB0R_DISABLE PPC_REG_VAL(8, 0)
+#define SDRAM_MODT_EB0R_ENABLE PPC_REG_VAL(8, 1)
+
+/*
+ * SDRAM Controller On Die Termination Register
+ */
+#define SDRAM_CODT_ODT_ON PPC_REG_VAL(0, 1)
+#define SDRAM_CODT_ODT_OFF PPC_REG_VAL(0, 0)
+#define SDRAM_CODT_RK1W_ON PPC_REG_VAL(1, 1)
+#define SDRAM_CODT_RK1W_OFF PPC_REG_VAL(1, 0)
+#define SDRAM_CODT_RK1R_ON PPC_REG_VAL(2, 1)
+#define SDRAM_CODT_RK1R_OFF PPC_REG_VAL(2, 0)
+#define SDRAM_CODT_RK0W_ON PPC_REG_VAL(7, 1)
+#define SDRAM_CODT_RK0W_OFF PPC_REG_VAL(7, 0)
+#define SDRAM_CODT_RK0R_ON PPC_REG_VAL(8, 1)
+#define SDRAM_CODT_RK0R_OFF PPC_REG_VAL(8, 0)
+#define SDRAM_CODT_ODTSH_NORMAL PPC_REG_VAL(10, 0)
+#define SDRAM_CODT_ODTSH_REMOVE_ONE_AT_END PPC_REG_VAL(10, 1)
+#define SDRAM_CODT_ODTSH_ADD_ONE_AT_START PPC_REG_VAL(10, 2)
+#define SDRAM_CODT_ODTSH_SHIFT_ONE_EARLIER PPC_REG_VAL(10, 3)
+#define SDRAM_CODT_CODTZ_75OHM PPC_REG_VAL(11, 0)
+#define SDRAM_CODT_CKEG_ON PPC_REG_VAL(12, 1)
+#define SDRAM_CODT_CKEG_OFF PPC_REG_VAL(12, 0)
+#define SDRAM_CODT_CTLG_ON PPC_REG_VAL(13, 1)
+#define SDRAM_CODT_CTLG_OFF PPC_REG_VAL(13, 0)
+#define SDRAM_CODT_FBDG_ON PPC_REG_VAL(14, 1)
+#define SDRAM_CODT_FBDG_OFF PPC_REG_VAL(14, 0)
+#define SDRAM_CODT_FBRG_ON PPC_REG_VAL(15, 1)
+#define SDRAM_CODT_FBRG_OFF PPC_REG_VAL(15, 0)
+#define SDRAM_CODT_CKLZ_36OHM PPC_REG_VAL(18, 1)
+#define SDRAM_CODT_CKLZ_18OHM PPC_REG_VAL(18, 0)
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK PPC_REG_VAL(26, 1)
+#define SDRAM_CODT_DQS_2_5_V_DDR1 PPC_REG_VAL(26, 0)
+#define SDRAM_CODT_DQS_1_8_V_DDR2 PPC_REG_VAL(26, 1)
+#define SDRAM_CODT_DQS_MASK PPC_REG_VAL(27, 1)
+#define SDRAM_CODT_DQS_DIFFERENTIAL PPC_REG_VAL(27, 0)
+#define SDRAM_CODT_DQS_SINGLE_END PPC_REG_VAL(27, 1)
+#define SDRAM_CODT_CKSE_DIFFERENTIAL PPC_REG_VAL(28, 0)
+#define SDRAM_CODT_CKSE_SINGLE_END PPC_REG_VAL(28, 1)
+#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END PPC_REG_VAL(29, 1)
+#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END PPC_REG_VAL(30, 1)
+#define SDRAM_CODT_IO_HIZ PPC_REG_VAL(31, 0)
+#define SDRAM_CODT_IO_NMODE PPC_REG_VAL(31, 1)
+
+/*
+ * SDRAM Initialization Preload Register
+ */
+#define SDRAM_INITPLR_ENABLE PPC_REG_VAL(0, 1)
+#define SDRAM_INITPLR_DISABLE PPC_REG_VAL(0, 0)
+#define SDRAM_INITPLR_IMWT_MASK PPC_REG_VAL(8, 0xFF)
+#define SDRAM_INITPLR_IMWT_ENCODE(n) PPC_REG_VAL(8, \
+ (static_cast(u32, \
+ n)) \
+ & 0xFF)
+#define SDRAM_INITPLR_ICMD_MASK PPC_REG_VAL(12, 0x7)
+#define SDRAM_INITPLR_ICMD_ENCODE(n) PPC_REG_VAL(12, \
+ (static_cast(u32, \
+ n)) \
+ & 0x7)
+#define SDRAM_INITPLR_IBA_MASK PPC_REG_VAL(15, 0x7)
+#define SDRAM_INITPLR_IBA_ENCODE(n) PPC_REG_VAL(15, \
+ (static_cast(u32, \
+ n)) \
+ & 0x7)
+#define SDRAM_INITPLR_IMA_MASK PPC_REG_VAL(31, 0x7FFF)
+#define SDRAM_INITPLR_IMA_ENCODE(n) PPC_REG_VAL(31, \
+ (static_cast(u32, \
+ n)) \
+ & 0x7FFF)
+
+/*
+ * JEDEC DDR Initialization Commands
+ */
+#define JEDEC_CMD_NOP 7
+#define JEDEC_CMD_PRECHARGE 2
+#define JEDEC_CMD_REFRESH 1
+#define JEDEC_CMD_EMR 0
+#define JEDEC_CMD_READ 5
+#define JEDEC_CMD_WRITE 4
+
+/*
+ * JEDEC Precharge Command Memory Address Arguments
+ */
+#define JEDEC_MA_PRECHARGE_ONE (0 << 10)
+#define JEDEC_MA_PRECHARGE_ALL (1 << 10)
+
+/*
+ * JEDEC DDR EMR Command Bank Address Arguments
+ */
+#define JEDEC_BA_MR 0
+#define JEDEC_BA_EMR 1
+#define JEDEC_BA_EMR2 2
+#define JEDEC_BA_EMR3 3
+
+/*
+ * JEDEC DDR Mode Register
+ */
+#define JEDEC_MA_MR_PDMODE_FAST_EXIT (0 << 12)
+#define JEDEC_MA_MR_PDMODE_SLOW_EXIT (1 << 12)
+#define JEDEC_MA_MR_WR_MASK (0x7 << 9)
+#define JEDEC_MA_MR_WR_DDR1 (0x0 << 9)
+#define JEDEC_MA_MR_WR_DDR2_2_CYC (0x1 << 9)
+#define JEDEC_MA_MR_WR_DDR2_3_CYC (0x2 << 9)
+#define JEDEC_MA_MR_WR_DDR2_4_CYC (0x3 << 9)
+#define JEDEC_MA_MR_WR_DDR2_5_CYC (0x4 << 9)
+#define JEDEC_MA_MR_WR_DDR2_6_CYC (0x5 << 9)
+#define JEDEC_MA_MR_DLL_RESET (1 << 8)
+#define JEDEC_MA_MR_MODE_NORMAL (0 << 8)
+#define JEDEC_MA_MR_MODE_TEST (1 << 8)
+#define JEDEC_MA_MR_CL_MASK (0x7 << 4)
+#define JEDEC_MA_MR_CL_DDR1_2_0_CLK (0x2 << 4)
+#define JEDEC_MA_MR_CL_DDR1_2_5_CLK (0x6 << 4)
+#define JEDEC_MA_MR_CL_DDR1_3_0_CLK (0x3 << 4)
+#define JEDEC_MA_MR_CL_DDR2_2_0_CLK (0x2 << 4)
+#define JEDEC_MA_MR_CL_DDR2_3_0_CLK (0x3 << 4)
+#define JEDEC_MA_MR_CL_DDR2_4_0_CLK (0x4 << 4)
+#define JEDEC_MA_MR_CL_DDR2_5_0_CLK (0x5 << 4)
+#define JEDEC_MA_MR_CL_DDR2_6_0_CLK (0x6 << 4)
+#define JEDEC_MA_MR_CL_DDR2_7_0_CLK (0x7 << 4)
+#define JEDEC_MA_MR_BTYP_SEQUENTIAL (0 << 3)
+#define JEDEC_MA_MR_BTYP_INTERLEAVED (1 << 3)
+#define JEDEC_MA_MR_BLEN_MASK (0x7 << 0)
+#define JEDEC_MA_MR_BLEN_4 (2 << 0)
+#define JEDEC_MA_MR_BLEN_8 (3 << 0)
+
+/*
+ * JEDEC DDR Extended Mode Register
+ */
+#define JEDEC_MA_EMR_OUTPUT_MASK (1 << 12)
+#define JEDEC_MA_EMR_OUTPUT_ENABLE (0 << 12)
+#define JEDEC_MA_EMR_OUTPUT_DISABLE (1 << 12)
+#define JEDEC_MA_EMR_RQDS_MASK (1 << 11)
+#define JEDEC_MA_EMR_RDQS_DISABLE (0 << 11)
+#define JEDEC_MA_EMR_RDQS_ENABLE (1 << 11)
+#define JEDEC_MA_EMR_DQS_MASK (1 << 10)
+#define JEDEC_MA_EMR_DQS_DISABLE (1 << 10)
+#define JEDEC_MA_EMR_DQS_ENABLE (0 << 10)
+#define JEDEC_MA_EMR_OCD_MASK (0x7 << 7)
+#define JEDEC_MA_EMR_OCD_EXIT (0 << 7)
+#define JEDEC_MA_EMR_OCD_ENTER (7 << 7)
+#define JEDEC_MA_EMR_AL_DDR1_0_CYC (0 << 3)
+#define JEDEC_MA_EMR_AL_DDR2_1_CYC (1 << 3)
+#define JEDEC_MA_EMR_AL_DDR2_2_CYC (2 << 3)
+#define JEDEC_MA_EMR_AL_DDR2_3_CYC (3 << 3)
+#define JEDEC_MA_EMR_AL_DDR2_4_CYC (4 << 3)
+#define JEDEC_MA_EMR_RTT_MASK (0x11 << 2)
+#define JEDEC_MA_EMR_RTT_DISABLED (0x00 << 2)
+#define JEDEC_MA_EMR_RTT_75OHM (0x01 << 2)
+#define JEDEC_MA_EMR_RTT_150OHM (0x10 << 2)
+#define JEDEC_MA_EMR_RTT_50OHM (0x11 << 2)
+#define JEDEC_MA_EMR_ODS_MASK (1 << 1)
+#define JEDEC_MA_EMR_ODS_NORMAL (0 << 1)
+#define JEDEC_MA_EMR_ODS_WEAK (1 << 1)
+#define JEDEC_MA_EMR_DLL_MASK (1 << 0)
+#define JEDEC_MA_EMR_DLL_ENABLE (0 << 0)
+#define JEDEC_MA_EMR_DLL_DISABLE (1 << 0)
+
+/*
+ * JEDEC DDR Extended Mode Register 2
+ */
+#define JEDEC_MA_EMR2_TEMP_COMMERCIAL (0 << 7)
+#define JEDEC_MA_EMR2_TEMP_INDUSTRIAL (1 << 7)
+
+/*
+ * SDRAM Mode Register (Corresponds 1:1 w/ JEDEC Mode Register)
+ */
+#define SDRAM_MMODE_WR_MASK JEDEC_MA_MR_WR_MASK
+#define SDRAM_MMODE_WR_DDR1 JEDEC_MA_MR_WR_DDR1
+#define SDRAM_MMODE_WR_DDR2_2_CYC JEDEC_MA_MR_WR_DDR2_2_CYC
+#define SDRAM_MMODE_WR_DDR2_3_CYC JEDEC_MA_MR_WR_DDR2_3_CYC
+#define SDRAM_MMODE_WR_DDR2_4_CYC JEDEC_MA_MR_WR_DDR2_4_CYC
+#define SDRAM_MMODE_WR_DDR2_5_CYC JEDEC_MA_MR_WR_DDR2_5_CYC
+#define SDRAM_MMODE_WR_DDR2_6_CYC JEDEC_MA_MR_WR_DDR2_6_CYC
+#define SDRAM_MMODE_DCL_MASK JEDEC_MA_MR_CL_MASK
+#define SDRAM_MMODE_DCL_DDR1_2_0_CLK JEDEC_MA_MR_CL_DDR1_2_0_CLK
+#define SDRAM_MMODE_DCL_DDR1_2_5_CLK JEDEC_MA_MR_CL_DDR1_2_5_CLK
+#define SDRAM_MMODE_DCL_DDR1_3_0_CLK JEDEC_MA_MR_CL_DDR1_3_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_2_0_CLK JEDEC_MA_MR_CL_DDR2_2_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_3_0_CLK JEDEC_MA_MR_CL_DDR2_3_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_4_0_CLK JEDEC_MA_MR_CL_DDR2_4_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_5_0_CLK JEDEC_MA_MR_CL_DDR2_5_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_6_0_CLK JEDEC_MA_MR_CL_DDR2_6_0_CLK
+#define SDRAM_MMODE_DCL_DDR2_7_0_CLK JEDEC_MA_MR_CL_DDR2_7_0_CLK
+#define SDRAM_MMODE_BTYP_SEQUENTIAL JEDEC_MA_MR_BTYP_SEQUENTIAL
+#define SDRAM_MMODE_BTYP_INTERLEAVED JEDEC_MA_MR_BTYP_INTERLEAVED
+#define SDRAM_MMODE_BLEN_MASK JEDEC_MA_MR_BLEN_MASK
+#define SDRAM_MMODE_BLEN_4 JEDEC_MA_MR_BLEN_4
+#define SDRAM_MMODE_BLEN_8 JEDEC_MA_MR_BLEN_8
+
+/*
+ * SDRAM Extended Mode Register (Corresponds 1:1 w/ JEDEC Extended
+ * Mode Register)
+ */
+#define SDRAM_MEMODE_QOFF_MASK JEDEC_MA_EMR_OUTPUT_MASK
+#define SDRAM_MEMODE_QOFF_DISABLE JEDEC_MA_EMR_OUTPUT_DISABLE
+#define SDRAM_MEMODE_QOFF_ENABLE JEDEC_MA_EMR_OUTPUT_ENABLE
+#define SDRAM_MEMODE_RDQS_MASK JEDEC_MA_EMR_RQDS_MASK
+#define SDRAM_MEMODE_RDQS_DISABLE JEDEC_MA_EMR_RDQS_DISABLE
+#define SDRAM_MEMODE_RDQS_ENABLE JEDEC_MA_EMR_RDQS_ENABLE
+#define SDRAM_MEMODE_DQS_MASK JEDEC_MA_EMR_DQS_MASK
+#define SDRAM_MEMODE_DQS_DISABLE JEDEC_MA_EMR_DQS_DISABLE
+#define SDRAM_MEMODE_DQS_ENABLE JEDEC_MA_EMR_DQS_ENABLE
+#define SDRAM_MEMODE_AL_DDR1_0_CYC JEDEC_MA_EMR_AL_DDR1_0_CYC
+#define SDRAM_MEMODE_AL_DDR2_1_CYC JEDEC_MA_EMR_AL_DDR2_1_CYC
+#define SDRAM_MEMODE_AL_DDR2_2_CYC JEDEC_MA_EMR_AL_DDR2_2_CYC
+#define SDRAM_MEMODE_AL_DDR2_3_CYC JEDEC_MA_EMR_AL_DDR2_3_CYC
+#define SDRAM_MEMODE_AL_DDR2_4_CYC JEDEC_MA_EMR_AL_DDR2_4_CYC
+#define SDRAM_MEMODE_RTT_MASK JEDEC_MA_EMR_RTT_MASK
+#define SDRAM_MEMODE_RTT_DISABLED JEDEC_MA_EMR_RTT_DISABLED
+#define SDRAM_MEMODE_RTT_75OHM JEDEC_MA_EMR_RTT_75OHM
+#define SDRAM_MEMODE_RTT_150OHM JEDEC_MA_EMR_RTT_150OHM
+#define SDRAM_MEMODE_RTT_50OHM JEDEC_MA_EMR_RTT_50OHM
+#define SDRAM_MEMODE_DIC_MASK JEDEC_MA_EMR_ODS_MASK
+#define SDRAM_MEMODE_DIC_NORMAL JEDEC_MA_EMR_ODS_NORMAL
+#define SDRAM_MEMODE_DIC_WEAK JEDEC_MA_EMR_ODS_WEAK
+#define SDRAM_MEMODE_DLL_MASK JEDEC_MA_EMR_DLL_MASK
+#define SDRAM_MEMODE_DLL_DISABLE JEDEC_MA_EMR_DLL_DISABLE
+#define SDRAM_MEMODE_DLL_ENABLE JEDEC_MA_EMR_DLL_ENABLE
+
+/*
+ * SDRAM Clock Timing Register
+ */
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
+#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000
+
+/*
+ * SDRAM Write Timing Register
+ */
+#define SDRAM_WRDTR_LLWP_MASK 0x10000000
+#define SDRAM_WRDTR_LLWP_DIS 0x10000000
+#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
+#define SDRAM_WRDTR_WTR_MASK 0x0E000000
+#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
+#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
+#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
+
+/*
+ * SDRAM SDTR1 Options
+ */
+#define SDRAM_SDTR1_LDOF_MASK 0x80000000
+#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
+#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
+#define SDRAM_SDTR1_RTW_MASK 0x00F00000
+#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
+#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
+#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
+#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
+#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
+#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
+#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
+#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
+
+/*
+ * SDRAM SDTR2 Options
+ */
+#define SDRAM_SDTR2_RCD_MASK 0xF0000000
+#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
+#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
+#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
+#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
+#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
+#define SDRAM_SDTR2_WTR_MASK 0x0F000000
+#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
+#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
+#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
+#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
+#define SDRAM_SDTR3_WTR_ENCODE(n) ((((u32)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
+#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
+#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
+#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
+#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
+#define SDRAM_SDTR2_WPC_MASK 0x0000F000
+#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
+#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
+#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
+#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
+#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
+#define SDRAM_SDTR3_WPC_ENCODE(n) ((((u32)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK 0x00000F00
+#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
+#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
+#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
+#define SDRAM_SDTR2_RP_MASK 0x000000F0
+#define SDRAM_SDTR2_RP_3_CLK 0x00000030
+#define SDRAM_SDTR2_RP_4_CLK 0x00000040
+#define SDRAM_SDTR2_RP_5_CLK 0x00000050
+#define SDRAM_SDTR2_RP_6_CLK 0x00000060
+#define SDRAM_SDTR2_RP_7_CLK 0x00000070
+#define SDRAM_SDTR2_RRD_MASK 0x0000000F
+#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
+#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
+
+/*
+ * SDRAM SDTR3 Options
+ */
+#define SDRAM_SDTR3_RAS_MASK 0x1F000000
+#define SDRAM_SDTR3_RAS_ENCODE(n) ((((u32)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK 0x001F0000
+#define SDRAM_SDTR3_RC_ENCODE(n) ((((u32)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK 0x00001F00
+#define SDRAM_SDTR3_XCS 0x00000D00
+#define SDRAM_SDTR3_RFC_MASK 0x0000003F
+#define SDRAM_SDTR3_RFC_ENCODE(n) ((((u32)(n))&0x3F)<<0)
+
+/*
+ * ECC Error Status
+ */
+#define SDRAM_ECCES_MASK PPC_REG_VAL(21, 0x3FFFFF)
+#define SDRAM_ECCES_BNCE_MASK PPC_REG_VAL(15, 0xFFFF)
+#define SDRAM_ECCES_BNCE_ENCODE(lane) PPC_REG_VAL(((lane) & 0xF), 1)
+#define SDRAM_ECCES_CKBER_MASK PPC_REG_VAL(17, 0x3)
+#define SDRAM_ECCES_CKBER_NONE PPC_REG_VAL(17, 0)
+#define SDRAM_ECCES_CKBER_16_ECC_0_3 PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_3 PPC_REG_VAL(17, 1)
+#define SDRAM_ECCES_CKBER_32_ECC_4_8 PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_8 PPC_REG_VAL(17, 3)
+#define SDRAM_ECCES_CE PPC_REG_VAL(18, 1)
+#define SDRAM_ECCES_UE PPC_REG_VAL(19, 1)
+#define SDRAM_ECCES_BKNER_MASK PPC_REG_VAL(21, 0x3)
+#define SDRAM_ECCES_BK0ER PPC_REG_VAL(20, 1)
+#define SDRAM_ECCES_BK1ER PPC_REG_VAL(21, 1)
+
+/*
+ * Memory Bank 0-1 configuration
+ */
+#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
+#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
+#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
+#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
+#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
+#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
+#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
+#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
+#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
+#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
+#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
+#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+
+#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
+#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
+#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
+#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
+#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
+
+#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
+
+#if defined(CONFIG_SDRAM_PPC4xx_DENALI_DDR2)
+/*
+ * SDRAM Controller
+ */
+#define DDR0_00 0x00
+#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL 0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n) ((((u32)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0 0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1 0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2 0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3 0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4 0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5 0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6 0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7 0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n) ((((u32)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n) ((((u32)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_01 0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((u32)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((u32)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((u32)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((u32)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((u32)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((u32)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK 0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n) ((((u32)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n) ((((u32)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
+
+#define DDR0_02 0x02
+#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((u32)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n) ((((u32)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((u32)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n) ((((u32)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((u32)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((u32)(n))>>8)&0xF)
+#define DDR0_02_START_MASK 0x00000001
+#define DDR0_02_START_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n) ((((u32)(n))>>0)&0x1)
+#define DDR0_02_START_OFF 0x00000000
+#define DDR0_02_START_ON 0x00000001
+
+#define DDR0_03 0x03
+#define DDR0_03_BSTLEN_MASK 0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n) ((((u32)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n) ((((u32)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK 0x00070000
+#define DDR0_03_CASLAT_ENCODE(n) ((((u32)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n) ((((u32)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((u32)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n) ((((u32)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK 0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n) ((((u32)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n) ((((u32)(n))>>0)&0xF)
+
+#define DDR0_04 0x04
+#define DDR0_04_TRC_MASK 0x1F000000
+#define DDR0_04_TRC_ENCODE(n) ((((u32)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n) ((((u32)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK 0x00070000
+#define DDR0_04_TRRD_ENCODE(n) ((((u32)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n) ((((u32)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK 0x00000700
+#define DDR0_04_TRTP_ENCODE(n) ((((u32)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n) ((((u32)(n))>>8)&0x7)
+
+#define DDR0_05 0x05
+#define DDR0_05_TMRD_MASK 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n) ((((u32)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n) ((((u32)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK 0x00070000
+#define DDR0_05_TEMRS_ENCODE(n) ((((u32)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n) ((((u32)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK 0x00000F00
+#define DDR0_05_TRP_ENCODE(n) ((((u32)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n) ((((u32)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK 0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n) ((((u32)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n) ((((u32)(n))>>0)&0xFF)
+
+#define DDR0_06 0x06
+#define DDR0_06_WRITEINTERP_MASK 0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n) ((((u32)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n) ((((u32)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK 0x00070000
+#define DDR0_06_TWTR_ENCODE(n) ((((u32)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n) ((((u32)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n) ((((u32)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n) ((((u32)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_07 0x07
+#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((u32)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((u32)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n) ((((u32)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n) ((((u32)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((u32)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((u32)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK 0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_08 0x08
+#define DDR0_08_WRLAT_MASK 0x07000000
+#define DDR0_08_WRLAT_ENCODE(n) ((((u32)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n) ((((u32)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n) ((((u32)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n) ((((u32)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK 0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n) ((((u32)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n) ((((u32)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
+#define DDR0_08_DDRII_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_09 0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((u32)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK 0x00030000
+#define DDR0_09_RTT_0_ENCODE(n) ((((u32)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n) ((((u32)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_10 0x0A
+#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((u32)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK 0x00000300
+#define DDR0_10_CS_MAP_NO_MEM 0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n) ((((u32)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n) ((((u32)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((u32)(n))>>0)&0x1F)
+
+#define DDR0_11 0x0B
+#define DDR0_11_SREFRESH_MASK 0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n) ((((u32)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK 0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n) ((((u32)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n) ((((u32)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n) ((((u32)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n) ((((u32)(n))>>8)&0xFF)
+
+#define DDR0_12 0x0C
+#define DDR0_12_TCKE_MASK 0x0000007
+#define DDR0_12_TCKE_ENCODE(n) ((((u32)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n) ((((u32)(n))>>0)&0x7)
+
+#define DDR0_14 0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((u32)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((u32)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK 0x00010000
+#define DDR0_14_REDUC_64BITS 0x00000000
+#define DDR0_14_REDUC_32BITS 0x00010000
+#define DDR0_14_REDUC_ENCODE(n) ((((u32)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n) ((((u32)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((u32)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((u32)(n))>>8)&0x1)
+
+#define DDR0_17 0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((u32)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n) ((((u32)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n) ((((u32)(n))>>8)&0x7F)
+
+#define DDR0_18 0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((u32)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((u32)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_19 0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((u32)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((u32)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_20 0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((u32)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((u32)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_21 0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((u32)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((u32)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((u32)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_22 0x16
+#define DDR0_22_CTRL_RAW_MASK 0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000
+#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000
+#define DDR0_22_CTRL_RAW_ENCODE(n) ((((u32)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n) ((((u32)(n))>>24)&0x3)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((u32)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((u32)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((u32)(n))>>0)&0x7F)
+
+#define DDR0_23 0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((u32)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n) ((((u32)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n) ((((u32)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_24 0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((u32)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((u32)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((u32)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((u32)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((u32)(n))>>0)&0x3)
+
+#define DDR0_25 0x19
+#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((u32)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((u32)(n))>>0)&0x3FF)
+
+#define DDR0_26 0x1A
+#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
+#define DDR0_26_TREF_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
+
+#define DDR0_27 0x1B
+#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK 0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
+
+#define DDR0_28 0x1C
+#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
+
+#define DDR0_31 0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
+
+#define DDR0_32 0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33 0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_34 0x22
+#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35 0x23
+#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_36 0x24
+#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37 0x25
+#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38 0x26
+#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39 0x27
+#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_40 0x28
+#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41 0x29
+#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42 0x2A
+#define DDR0_42_ADDR_PINS_MASK 0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n) ((((u32)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n) ((((u32)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((u32)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((u32)(n))>>0)&0xF)
+
+#define DDR0_43 0x2B
+#define DDR0_43_TWR_MASK 0x07000000
+#define DDR0_43_TWR_ENCODE(n) ((((u32)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n) ((((u32)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK 0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n) ((((u32)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n) ((((u32)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((u32)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((u32)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((u32)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((u32)(n))>>0)&0x1)
+
+#define DDR0_44 0x2C
+#define DDR0_44_TRCD_MASK 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n) ((((u32)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n) ((((u32)(n))>>0)&0xFF)
+
+#endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
+
+#ifndef __ASSEMBLY__
+/*
+ * Prototypes
+ */
+inline void ppc4xx_ibm_ddr2_register_dump(void);
+u32 mfdcr_any(u32);
+void mtdcr_any(u32, u32);
+u32 ddr_wrdtr(u32);
+u32 ddr_clktr(u32);
+void spd_ddr_init_hang(void);
+u32 DQS_autocalibration(void);
+phys_size_t sdram_memsize(void);
+void dcbz_area(u32 start_address, u32 num_bytes);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PPC4xx_SDRAM_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC4xx_UIC_H_
+#define _PPC4xx_UIC_H_
+
+/*
+ * Define the number of UIC's
+ */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+#define UIC_MAX 4
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_405EX)
+#define UIC_MAX 3
+#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define UIC_MAX 2
+#else
+#define UIC_MAX 1
+#endif
+
+#define IRQ_MAX (UIC_MAX * 32)
+
+/*
+ * UIC register
+ */
+#define UIC_SR 0x0 /* UIC status */
+#define UIC_ER 0x2 /* UIC enable */
+#define UIC_CR 0x3 /* UIC critical */
+#define UIC_PR 0x4 /* UIC polarity */
+#define UIC_TR 0x5 /* UIC triggering */
+#define UIC_MSR 0x6 /* UIC masked status */
+#define UIC_VR 0x7 /* UIC vector */
+#define UIC_VCR 0x8 /* UIC vector configuration */
+
+/*
+ * On 440GX we use the UICB0 as UIC0. Its the root UIC where all other UIC's
+ * are cascaded on. With this trick we can use the common UIC code for 440GX
+ * too.
+ */
+#if defined(CONFIG_440GX)
+#define UIC0_DCR_BASE 0x200
+#define UIC1_DCR_BASE 0xc0
+#define UIC2_DCR_BASE 0xd0
+#define UIC3_DCR_BASE 0x210
+#else
+#define UIC0_DCR_BASE 0xc0
+#define UIC1_DCR_BASE 0xd0
+#define UIC2_DCR_BASE 0xe0
+#define UIC3_DCR_BASE 0xf0
+#endif
+
+#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */
+#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */
+#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */
+#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
+#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
+#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
+#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */
+#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
+
+#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */
+#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */
+#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */
+#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
+#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
+#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
+#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */
+#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+
+#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
+#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
+#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */
+#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */
+#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
+#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
+#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
+#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */
+#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
+
+/*
+ * Now the interrupt vector definitions. They are different for most of
+ * the 4xx variants, so we need some more #ifdef's here. No mask
+ * definitions anymore here. For this please use the UIC_MASK macro below.
+ *
+ * Note: Please only define the interrupts really used in U-Boot here.
+ * Those are the cascading and EMAC/MAL related interrupt.
+ */
+
+#if defined(CONFIG_405EP) || defined(CONFIG_405GP)
+#define VECNUM_MAL_SERR 10
+#define VECNUM_MAL_TXEOB 11
+#define VECNUM_MAL_RXEOB 12
+#define VECNUM_MAL_TXDE 13
+#define VECNUM_MAL_RXDE 14
+#define VECNUM_ETH0 15
+#define VECNUM_ETH1_OFFS 2
+#define VECNUM_EIRQ6 29
+#endif /* defined(CONFIG_405EP) */
+
+#if defined(CONFIG_405EZ)
+#define VECNUM_USBDEV 15
+#define VECNUM_ETH0 16
+#define VECNUM_MAL_SERR 18
+#define VECNUM_MAL_TXDE 18
+#define VECNUM_MAL_RXDE 18
+#define VECNUM_MAL_TXEOB 19
+#define VECNUM_MAL_RXEOB 21
+#endif /* CONFIG_405EX */
+
+#if defined(CONFIG_405EX)
+/* UIC 0 */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1_OFFS 1
+#define VECNUM_UIC2NCI 28
+#define VECNUM_UIC2CI 29
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+#endif /* CONFIG_405EX */
+
+#if defined(CONFIG_440GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR)
+/* UIC 0 */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+#define VECNUM_USBDEV (32 + 23)
+#define VECNUM_ETH0 (32 + 28)
+#define VECNUM_ETH1_OFFS 2
+#endif /* CONFIG_440GP */
+
+#if defined(CONFIG_440GX)
+/* UICB 0 (440GX only) */
+/*
+ * All those defines below are off-by-one, so that the common UIC code
+ * can be used. So VECNUM_UIC1CI refers to VECNUM_UIC0CI etc.
+ */
+#define VECNUM_UIC1CI 0
+#define VECNUM_UIC1NCI 1
+#define VECNUM_UIC2CI 2
+#define VECNUM_UIC2NCI 3
+#define VECNUM_UIC3CI 4
+#define VECNUM_UIC3NCI 5
+
+/* UIC 0, used as UIC1 on 440GX because of UICB0 */
+#define VECNUM_MAL_TXEOB (32 + 10)
+#define VECNUM_MAL_RXEOB (32 + 11)
+
+/* UIC 1, used as UIC2 on 440GX because of UICB0 */
+#define VECNUM_MAL_SERR (64 + 0)
+#define VECNUM_MAL_TXDE (64 + 1)
+#define VECNUM_MAL_RXDE (64 + 2)
+#define VECNUM_ETH0 (64 + 28)
+#define VECNUM_ETH1_OFFS 2
+#endif /* CONFIG_440GX */
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+/* UIC 0 */
+#define VECNUM_MAL_TXEOB 10
+#define VECNUM_MAL_RXEOB 11
+#define VECNUM_USBDEV 20
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1_OFFS 1
+#define VECNUM_UIC2NCI 28
+#define VECNUM_UIC2CI 29
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 0)
+#define VECNUM_MAL_TXDE (32 + 1)
+#define VECNUM_MAL_RXDE (32 + 2)
+
+/* UIC 2 */
+#define VECNUM_EIRQ2 (64 + 3)
+#endif /* CONFIG_440EPX */
+
+#if defined(CONFIG_440SP)
+/* UIC 0 */
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 1)
+#define VECNUM_MAL_TXDE (32 + 2)
+#define VECNUM_MAL_RXDE (32 + 3)
+#define VECNUM_MAL_TXEOB (32 + 6)
+#define VECNUM_MAL_RXEOB (32 + 7)
+#define VECNUM_ETH0 (32 + 28)
+#endif /* CONFIG_440SP */
+
+#if defined(CONFIG_440SPE)
+/* UIC 0 */
+#define VECNUM_UIC2NCI 10
+#define VECNUM_UIC2CI 11
+#define VECNUM_UIC3NCI 16
+#define VECNUM_UIC3CI 17
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 1)
+#define VECNUM_MAL_TXDE (32 + 2)
+#define VECNUM_MAL_RXDE (32 + 3)
+#define VECNUM_MAL_TXEOB (32 + 6)
+#define VECNUM_MAL_RXEOB (32 + 7)
+#define VECNUM_ETH0 (32 + 28)
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+/* UIC 0 */
+#define VECNUM_UIC2NCI 10
+#define VECNUM_UIC2CI 11
+#define VECNUM_UIC3NCI 16
+#define VECNUM_UIC3CI 17
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 2 */
+#define VECNUM_MAL_SERR (64 + 3)
+#define VECNUM_MAL_TXDE (64 + 4)
+#define VECNUM_MAL_RXDE (64 + 5)
+#define VECNUM_MAL_TXEOB (64 + 6)
+#define VECNUM_MAL_RXEOB (64 + 7)
+#define VECNUM_ETH0 (64 + 16)
+#define VECNUM_ETH1_OFFS 1
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_460SX)
+/* UIC 0 */
+#define VECNUM_UIC2NCI 10
+#define VECNUM_UIC2CI 11
+#define VECNUM_UIC3NCI 16
+#define VECNUM_UIC3CI 17
+#define VECNUM_ETH0 19
+#define VECNUM_ETH1_OFFS 1
+#define VECNUM_UIC1NCI 30
+#define VECNUM_UIC1CI 31
+
+/* UIC 1 */
+#define VECNUM_MAL_SERR (32 + 1)
+#define VECNUM_MAL_TXDE (32 + 2)
+#define VECNUM_MAL_RXDE (32 + 3)
+#define VECNUM_MAL_TXEOB (32 + 6)
+#define VECNUM_MAL_RXEOB (32 + 7)
+#endif /* CONFIG_460EX */
+
+#if !defined(VECNUM_ETH1_OFFS)
+#define VECNUM_ETH1_OFFS 1
+#endif
+
+/*
+ * Mask definitions (used for example in 4xx_enet.c)
+ */
+#define UIC_MASK(vec) (0x80000000 >> ((vec) & 0x1f))
+/* UIC_NR won't work for 440GX because of its specific UIC DCR addresses */
+#define UIC_NR(vec) ((vec) >> 5)
+
+#endif /* _PPC4xx_UIC_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PPC4xx_CONFIG_H
+#define __PPC4xx_CONFIG_H
+
+#include <common.h>
+
+struct ppc4xx_config {
+ char label[16];
+ char description[64];
+ u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE];
+};
+
+extern struct ppc4xx_config ppc4xx_config_val[];
+extern int ppc4xx_config_count;
+
+#endif /* __PPC4xx_CONFIG_H */
--- /dev/null
+#ifndef __ASM_PPC_PROCESSOR_H
+#define __ASM_PPC_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+/* Machine State Register (MSR) Fields */
+
+#ifdef CONFIG_PPC64BRIDGE
+#define MSR_SF (1<<63)
+#define MSR_ISF (1<<61)
+#endif /* CONFIG_PPC64BRIDGE */
+#define MSR_UCLE (1<<26) /* User-mode cache lock enable (e500) */
+#define MSR_VEC (1<<25) /* Enable AltiVec(74xx) */
+#define MSR_SPE (1<<25) /* Enable SPE(e500) */
+#define MSR_POW (1<<18) /* Enable Power Management */
+#define MSR_WE (1<<18) /* Wait State Enable */
+#define MSR_TGPR (1<<17) /* TLB Update registers in use */
+#define MSR_CE (1<<17) /* Critical Interrupt Enable */
+#define MSR_ILE (1<<16) /* Interrupt Little Endian */
+#define MSR_EE (1<<15) /* External Interrupt Enable */
+#define MSR_PR (1<<14) /* Problem State / Privilege Level */
+#define MSR_FP (1<<13) /* Floating Point enable */
+#define MSR_ME (1<<12) /* Machine Check Enable */
+#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
+#define MSR_SE (1<<10) /* Single Step */
+#define MSR_DWE (1<<10) /* Debug Wait Enable (4xx) */
+#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
+#define MSR_BE (1<<9) /* Branch Trace */
+#define MSR_DE (1<<9) /* Debug Exception Enable */
+#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
+#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
+#define MSR_IR (1<<5) /* Instruction Relocate */
+#define MSR_IS (1<<5) /* Book E Instruction space */
+#define MSR_DR (1<<4) /* Data Relocate */
+#define MSR_DS (1<<4) /* Book E Data space */
+#define MSR_PE (1<<3) /* Protection Enable */
+#define MSR_PX (1<<2) /* Protection Exclusive Mode */
+#define MSR_PMM (1<<2) /* Performance monitor mark bit (e500) */
+#define MSR_RI (1<<1) /* Recoverable Exception */
+#define MSR_LE (1<<0) /* Little Endian */
+
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define MSR_ MSR_ME|MSR_IP|MSR_RI
+#else
+#define MSR_ MSR_ME|MSR_RI
+#endif
+#ifndef CONFIG_E500
+#define MSR_KERNEL MSR_|MSR_IR|MSR_DR
+#else
+#define MSR_KERNEL MSR_ME
+#endif
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+
+#define FPSCR_FX 0x80000000 /* FPU exception summary */
+#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
+#define FPSCR_VX 0x20000000 /* Invalid operation summary */
+#define FPSCR_OX 0x10000000 /* Overflow exception summary */
+#define FPSCR_UX 0x08000000 /* Underflow exception summary */
+#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */
+#define FPSCR_XX 0x02000000 /* Inexact exception summary */
+#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
+#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
+#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
+#define FPSCR_FR 0x00040000 /* Fraction rounded */
+#define FPSCR_FI 0x00020000 /* Fraction inexact */
+#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
+#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
+#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
+#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
+#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
+#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
+#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
+#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
+#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
+#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
+#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
+#define FPSCR_RN 0x00000003 /* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+
+/* PPC440 Architecture is BOOK-E */
+#ifdef CONFIG_440
+#define CONFIG_BOOKE
+#endif
+
+#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
+#ifdef CONFIG_BOOKE
+#define SPRN_CCR1 0x378 /* Core Configuration Register for 440 only */
+#endif
+#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#ifndef CONFIG_BOOKE
+#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
+#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#else
+#define SPRN_DAC1 0x13C /* Book E Data Address Compare 1 */
+#define SPRN_DAC2 0x13D /* Book E Data Address Compare 2 */
+#endif /* CONFIG_BOOKE */
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Lower Register */
+#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
+#define DBCR_EDM 0x80000000
+#define DBCR_IDM 0x40000000
+#define DBCR_RST(x) (((x) & 0x3) << 28)
+#define DBCR_RST_NONE 0
+#define DBCR_RST_CORE 1
+#define DBCR_RST_CHIP 2
+#define DBCR_RST_SYSTEM 3
+#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
+#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
+#define DBCR_EDE 0x02000000 /* Exception Debug Event */
+#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
+#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
+#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
+#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
+#define DAC_BYTE 0
+#define DAC_HALF 1
+#define DAC_WORD 2
+#define DAC_QUAD 3
+#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
+#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
+#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
+#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
+#define DBCR_SIA 0x00000008 /* Second IAC Enable */
+#define DBCR_SDA 0x00000004 /* Second DAC Enable */
+#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
+#ifndef CONFIG_BOOKE
+#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
+#else
+#define SPRN_DBCR0 0x134 /* Book E Debug Control Register 0 */
+#endif /* CONFIG_BOOKE */
+#ifndef CONFIG_BOOKE
+#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
+#define SPRN_DBSR 0x3F0 /* Debug Status Register */
+#else
+#define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define SPRN_DBDR 0x3f3 /* Debug Data Register */
+#endif
+#define SPRN_DBSR 0x130 /* Book E Debug Status Register */
+#define DBSR_IC 0x08000000 /* Book E Instruction Completion */
+#define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */
+#endif /* CONFIG_BOOKE */
+#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
+#define DCCR_NOCACHE 0 /* Noncacheable */
+#define DCCR_CACHE 1 /* Cacheable */
+#ifndef CONFIG_BOOKE
+#define SPRN_DCDBTRL 0x39c /* Data Cache Debug Tag Register Low */
+#define SPRN_DCDBTRH 0x39d /* Data Cache Debug Tag Register High */
+#endif
+#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
+#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
+#define DCWR_COPY 0 /* Copy-back */
+#define DCWR_WRITE 1 /* Write-through */
+#ifndef CONFIG_BOOKE
+#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
+#else
+#define SPRN_DEAR 0x03D /* Book E Data Error Address Register */
+#endif /* CONFIG_BOOKE */
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_DNV0 0x390 /* Data Cache Normal Victim 0 */
+#define SPRN_DNV1 0x391 /* Data Cache Normal Victim 1 */
+#define SPRN_DNV2 0x392 /* Data Cache Normal Victim 2 */
+#define SPRN_DNV3 0x393 /* Data Cache Normal Victim 3 */
+#endif
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_DTV0 0x394 /* Data Cache Transient Victim 0 */
+#define SPRN_DTV1 0x395 /* Data Cache Transient Victim 1 */
+#define SPRN_DTV2 0x396 /* Data Cache Transient Victim 2 */
+#define SPRN_DTV3 0x397 /* Data Cache Transient Victim 3 */
+#define SPRN_DVLIM 0x398 /* Data Cache Victim Limit */
+#endif
+#define SPRN_EAR 0x11A /* External Address Register */
+#ifndef CONFIG_BOOKE
+#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
+#else
+#define SPRN_ESR 0x03E /* Book E Exception Syndrome Register */
+#endif /* CONFIG_BOOKE */
+#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
+#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
+#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
+#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
+#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
+#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PTR 0x02000000 /* Program Exception - Trap */
+#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
+#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
+#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+
+#define HID0_ICE_SHIFT 15
+#define HID0_DCE_SHIFT 14
+#define HID0_DLOCK_SHIFT 12
+
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
+#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
+#define HID0_TBEN (1<<14) /* Time Base Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
+#define HID0_DCI HID0_DCFI
+#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_ENMAS7 (1<<7) /* Enable MAS7 Update for 36-bit phys */
+#define HID0_SGE (1<<7) /* Store Gathering Enable */
+#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
+#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
+#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
+#define HID0_ABE (1<<3) /* Address Broadcast Enable */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define HID1_RFXE (1<<17) /* Read Fault Exception Enable */
+#define HID1_ASTME (1<<13) /* Address bus streaming mode */
+#define HID1_ABE (1<<12) /* Address broadcast enable */
+#define HID1_MBDD (1<<6) /* optimized sync instruction */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#ifndef CONFIG_BOOKE
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#else
+#define SPRN_IAC1 0x138 /* Book E Instruction Address Compare 1 */
+#define SPRN_IAC2 0x139 /* Book E Instruction Address Compare 2 */
+#endif /* CONFIG_BOOKE */
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define ICCR_NOCACHE 0 /* Noncacheable */
+#define ICCR_CACHE 1 /* Cacheable */
+#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_ICDBTRL 0x39e /* instruction cache debug tag register low */
+#define SPRN_ICDBTRH 0x39f /* instruction cache debug tag register high */
+#endif
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_INV0 0x370 /* Instruction Cache Normal Victim 0 */
+#define SPRN_INV1 0x371 /* Instruction Cache Normal Victim 1 */
+#define SPRN_INV2 0x372 /* Instruction Cache Normal Victim 2 */
+#define SPRN_INV3 0x373 /* Instruction Cache Normal Victim 3 */
+#define SPRN_ITV0 0x374 /* Instruction Cache Transient Victim 0 */
+#define SPRN_ITV1 0x375 /* Instruction Cache Transient Victim 1 */
+#define SPRN_ITV2 0x376 /* Instruction Cache Transient Victim 2 */
+#define SPRN_ITV3 0x377 /* Instruction Cache Transient Victim 3 */
+#define SPRN_IVLIM 0x399 /* Instruction Cache Victim Limit */
+#endif
+#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
+#define SPRN_LR 0x008 /* Link Register */
+#define SPRN_MBAR 0x137 /* System memory base address */
+#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define SPRN_MMUCR 0x3b2 /* MMU Control Register */
+#endif
+#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
+#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
+#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
+#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
+#ifndef CONFIG_BOOKE
+#define SPRN_PID 0x3B1 /* Process ID */
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#else
+#define SPRN_PID 0x030 /* Book E Process ID */
+#define SPRN_PIR 0x11E /* Book E Processor Identification Register */
+#endif /* CONFIG_BOOKE */
+#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
+#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
+#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
+#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
+#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_RSTCFG 0x39b /* Reset Configuration */
+#endif
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
+#define SGR_NORMAL 0
+#define SGR_GUARDED 1
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
+#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
+#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
+#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
+#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+
+#ifdef CONFIG_BOOKE
+#define SPRN_SVR 0x3FF /* System Version Register */
+#else
+#define SPRN_SVR 0x11E /* System Version Register */
+#endif
+#define SPRN_TBHI 0x3DC /* Time Base High */
+#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
+#define SPRN_TBLO 0x3DD /* Time Base Low */
+#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
+#define SPRN_TBRL 0x10C /* Time Base Read Lower Register */
+#define SPRN_TBRU 0x10D /* Time Base Read Upper Register */
+#define SPRN_TBWL 0x11C /* Time Base Write Lower Register */
+#define SPRN_TBWU 0x11D /* Time Base Write Upper Register */
+#ifndef CONFIG_BOOKE
+#define SPRN_TCR 0x3DA /* Timer Control Register */
+#else
+#define SPRN_TCR 0x154 /* Book E Timer Control Register */
+#endif /* CONFIG_BOOKE */
+#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
+#define WP_2_17 0 /* 2^17 clocks */
+#define WP_2_21 1 /* 2^21 clocks */
+#define WP_2_25 2 /* 2^25 clocks */
+#define WP_2_29 3 /* 2^29 clocks */
+#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
+#define WRC_NONE 0 /* No reset will occur */
+#define WRC_CORE 1 /* Core reset will occur */
+#define WRC_CHIP 2 /* Chip reset will occur */
+#define WRC_SYSTEM 3 /* System reset will occur */
+#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
+#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
+#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
+#define FP_2_9 0 /* 2^9 clocks */
+#define FP_2_13 1 /* 2^13 clocks */
+#define FP_2_17 2 /* 2^17 clocks */
+#define FP_2_21 3 /* 2^21 clocks */
+#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
+#define TCR_ARE 0x00400000 /* Auto Reload Enable */
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+#define THRM1_TIN (1<<0)
+#define THRM1_TIV (1<<1)
+#define THRM1_THRES (0x7f<<2)
+#define THRM1_TID (1<<29)
+#define THRM1_TIE (1<<30)
+#define THRM1_V (1<<31)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<31)
+#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
+#ifndef CONFIG_BOOKE
+#define SPRN_TSR 0x3D8 /* Timer Status Register */
+#else
+#define SPRN_TSR 0x150 /* Book E Timer Status Register */
+#endif /* CONFIG_BOOKE */
+#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
+#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
+#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
+#define WRS_NONE 0 /* No WDT reset occurred */
+#define WRS_CORE 1 /* WDT forced core reset */
+#define WRS_CHIP 2 /* WDT forced chip reset */
+#define WRS_SYSTEM 3 /* WDT forced system reset */
+#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
+#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
+
+/* Book E definitions */
+#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
+#define SPRN_CSRR0 0x03A /* Critical SRR0 */
+#define SPRN_CSRR1 0x03B /* Critical SRR0 */
+#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
+#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
+#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
+#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
+#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
+#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10 0x19a /* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11 0x19b /* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12 0x19c /* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13 0x19d /* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14 0x19e /* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15 0x19f /* Interrupt Vector Offset Register 15 */
+#define SPRN_IVOR38 0x1b0 /* Interrupt Vector Offset Register 38 */
+#define SPRN_IVOR39 0x1b1 /* Interrupt Vector Offset Register 39 */
+#define SPRN_IVOR40 0x1b2 /* Interrupt Vector Offset Register 40 */
+#define SPRN_IVOR41 0x1b3 /* Interrupt Vector Offset Register 41 */
+#define SPRN_GIVOR2 0x1b8 /* Guest Interrupt Vector Offset Register 2 */
+#define SPRN_GIVOR3 0x1b9 /* Guest Interrupt Vector Offset Register 3 */
+#define SPRN_GIVOR4 0x1ba /* Guest Interrupt Vector Offset Register 4 */
+#define SPRN_GIVOR8 0x1bb /* Guest Interrupt Vector Offset Register 8 */
+#define SPRN_GIVOR13 0x1bc /* Guest Interrupt Vector Offset Register 13 */
+#define SPRN_GIVOR14 0x1bd /* Guest Interrupt Vector Offset Register 14 */
+
+/* e500 definitions */
+#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
+#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
+#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */
+#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
+#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
+#define L1CSR0_DCLFR 0x00000100 /* D-Cache Lock Flash Reset */
+#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
+#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
+#define SPRN_L1CSR1 0x3f3 /* L1 Instruction Cache Control and Status Register 1 */
+#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
+#define L1CSR1_ICLFR 0x00000100 /* I-Cache Lock Flash Reset */
+#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
+#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
+#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
+#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
+#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
+#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
+#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
+#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
+#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
+#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
+#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */
+
+#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
+#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
+#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
+#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
+#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
+#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
+#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
+#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
+#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
+#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
+#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
+#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */
+
+#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
+#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
+
+#define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */
+#define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */
+#define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */
+#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */
+#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN)
+#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_PID1 0x279 /* Process ID Register 1 */
+#define SPRN_PID2 0x27a /* Process ID Register 2 */
+#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
+#define SPRN_MCAR 0x23d /* Machine Check Address register */
+#define MCSR_MCS 0x80000000 /* Machine Check Summary */
+#define MCSR_IB 0x40000000 /* Instruction PLB Error */
+#if defined(CONFIG_440)
+#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
+#else
+#define MCSR_DB 0x20000000 /* Data PLB Error */
+#endif /* defined(CONFIG_440) */
+#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
+#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
+#define ESR_ST 0x00800000 /* Store Operation */
+
+#if defined(CONFIG_MPC86xx)
+#define SPRN_MSSCR0 0x3f6
+#define SPRN_MSSSR0 0x3f7
+#endif
+
+/* Short-hand versions for a number of the above SPRNs */
+
+#define CTR SPRN_CTR /* Counter Register */
+#define DAR SPRN_DAR /* Data Address Register */
+#define DABR SPRN_DABR /* Data Address Breakpoint Register */
+#define DAC1 SPRN_DAC1 /* Data Address Register 1 */
+#define DAC2 SPRN_DAC2 /* Data Address Register 2 */
+#define DBAT0L SPRN_DBAT0L /* Data BAT 0 Lower Register */
+#define DBAT0U SPRN_DBAT0U /* Data BAT 0 Upper Register */
+#define DBAT1L SPRN_DBAT1L /* Data BAT 1 Lower Register */
+#define DBAT1U SPRN_DBAT1U /* Data BAT 1 Upper Register */
+#define DBAT2L SPRN_DBAT2L /* Data BAT 2 Lower Register */
+#define DBAT2U SPRN_DBAT2U /* Data BAT 2 Upper Register */
+#define DBAT3L SPRN_DBAT3L /* Data BAT 3 Lower Register */
+#define DBAT3U SPRN_DBAT3U /* Data BAT 3 Upper Register */
+#define DBAT4L SPRN_DBAT4L /* Data BAT 4 Lower Register */
+#define DBAT4U SPRN_DBAT4U /* Data BAT 4 Upper Register */
+#define DBAT5L SPRN_DBAT5L /* Data BAT 5 Lower Register */
+#define DBAT5U SPRN_DBAT5U /* Data BAT 5 Upper Register */
+#define DBAT6L SPRN_DBAT6L /* Data BAT 6 Lower Register */
+#define DBAT6U SPRN_DBAT6U /* Data BAT 6 Upper Register */
+#define DBAT7L SPRN_DBAT7L /* Data BAT 7 Lower Register */
+#define DBAT7U SPRN_DBAT7U /* Data BAT 7 Upper Register */
+#define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */
+#define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */
+#define DBSR SPRN_DBSR /* Debug Status Register */
+#define DCMP SPRN_DCMP /* Data TLB Compare Register */
+#define DEC SPRN_DEC /* Decrement Register */
+#define DMISS SPRN_DMISS /* Data TLB Miss Register */
+#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
+#define EAR SPRN_EAR /* External Address Register */
+#define ESR SPRN_ESR /* Exception Syndrome Register */
+#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
+#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
+#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
+#define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */
+#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
+#define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */
+#define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */
+#define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */
+#define IBAT0U SPRN_IBAT0U /* Instruction BAT 0 Upper Register */
+#define IBAT1L SPRN_IBAT1L /* Instruction BAT 1 Lower Register */
+#define IBAT1U SPRN_IBAT1U /* Instruction BAT 1 Upper Register */
+#define IBAT2L SPRN_IBAT2L /* Instruction BAT 2 Lower Register */
+#define IBAT2U SPRN_IBAT2U /* Instruction BAT 2 Upper Register */
+#define IBAT3L SPRN_IBAT3L /* Instruction BAT 3 Lower Register */
+#define IBAT3U SPRN_IBAT3U /* Instruction BAT 3 Upper Register */
+#define IBAT4L SPRN_IBAT4L /* Instruction BAT 4 Lower Register */
+#define IBAT4U SPRN_IBAT4U /* Instruction BAT 4 Upper Register */
+#define IBAT5L SPRN_IBAT5L /* Instruction BAT 5 Lower Register */
+#define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */
+#define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */
+#define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */
+#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
+#define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */
+#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
+#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
+#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
+#define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */
+#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
+#define LR SPRN_LR
+#define MBAR SPRN_MBAR /* System memory base address */
+#if defined(CONFIG_MPC86xx)
+#define MSSCR0 SPRN_MSSCR0
+#endif
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+#define PIR SPRN_PIR
+#endif
+#define SVR SPRN_SVR /* System-On-Chip Version Register */
+#define PVR SPRN_PVR /* Processor Version */
+#define RPA SPRN_RPA /* Required Physical Address Register */
+#define SDR1 SPRN_SDR1 /* MMU hash base register */
+#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
+#define SPR1 SPRN_SPRG1
+#define SPR2 SPRN_SPRG2
+#define SPR3 SPRN_SPRG3
+#define SPRG0 SPRN_SPRG0
+#define SPRG1 SPRN_SPRG1
+#define SPRG2 SPRN_SPRG2
+#define SPRG3 SPRN_SPRG3
+#define SPRG4 SPRN_SPRG4
+#define SPRG5 SPRN_SPRG5
+#define SPRG6 SPRN_SPRG6
+#define SPRG7 SPRN_SPRG7
+#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
+#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
+#define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */
+#define SRR3 SPRN_SRR3 /* Save and Restore Register 3 */
+#define SVR SPRN_SVR /* System Version Register */
+#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
+#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
+#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
+#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
+#define TCR SPRN_TCR /* Timer Control Register */
+#define TSR SPRN_TSR /* Timer Status Register */
+#define ICTC 1019
+#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
+#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
+#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
+#define XER SPRN_XER
+
+#define DECAR SPRN_DECAR
+#define CSRR0 SPRN_CSRR0
+#define CSRR1 SPRN_CSRR1
+#define IVPR SPRN_IVPR
+#define USPRG0 SPRN_USPRG
+#define SPRG4R SPRN_SPRG4R
+#define SPRG5R SPRN_SPRG5R
+#define SPRG6R SPRN_SPRG6R
+#define SPRG7R SPRN_SPRG7R
+#define SPRG4W SPRN_SPRG4W
+#define SPRG5W SPRN_SPRG5W
+#define SPRG6W SPRN_SPRG6W
+#define SPRG7W SPRN_SPRG7W
+#define DEAR SPRN_DEAR
+#define DBCR2 SPRN_DBCR2
+#define IAC3 SPRN_IAC3
+#define IAC4 SPRN_IAC4
+#define DVC1 SPRN_DVC1
+#define DVC2 SPRN_DVC2
+#define IVOR0 SPRN_IVOR0
+#define IVOR1 SPRN_IVOR1
+#define IVOR2 SPRN_IVOR2
+#define IVOR3 SPRN_IVOR3
+#define IVOR4 SPRN_IVOR4
+#define IVOR5 SPRN_IVOR5
+#define IVOR6 SPRN_IVOR6
+#define IVOR7 SPRN_IVOR7
+#define IVOR8 SPRN_IVOR8
+#define IVOR9 SPRN_IVOR9
+#define IVOR10 SPRN_IVOR10
+#define IVOR11 SPRN_IVOR11
+#define IVOR12 SPRN_IVOR12
+#define IVOR13 SPRN_IVOR13
+#define IVOR14 SPRN_IVOR14
+#define IVOR15 SPRN_IVOR15
+#define IVOR32 SPRN_IVOR32
+#define IVOR33 SPRN_IVOR33
+#define IVOR34 SPRN_IVOR34
+#define IVOR35 SPRN_IVOR35
+#define MCSRR0 SPRN_MCSRR0
+#define MCSRR1 SPRN_MCSRR1
+#define L1CSR0 SPRN_L1CSR0
+#define L1CSR1 SPRN_L1CSR1
+#define L1CSR2 SPRN_L1CSR2
+#define L1CFG0 SPRN_L1CFG0
+#define L1CFG1 SPRN_L1CFG1
+#define L2CFG0 SPRN_L2CFG0
+#define L2CSR0 SPRN_L2CSR0
+#define L2CSR1 SPRN_L2CSR1
+#define MCSR SPRN_MCSR
+#define MMUCSR0 SPRN_MMUCSR0
+#define BUCSR SPRN_BUCSR
+#define PID0 SPRN_PID
+#define PID1 SPRN_PID1
+#define PID2 SPRN_PID2
+#define MAS0 SPRN_MAS0
+#define MAS1 SPRN_MAS1
+#define MAS2 SPRN_MAS2
+#define MAS3 SPRN_MAS3
+#define MAS4 SPRN_MAS4
+#define MAS5 SPRN_MAS5
+#define MAS6 SPRN_MAS6
+#define MAS7 SPRN_MAS7
+#define MAS8 SPRN_MAS8
+
+#if defined(CONFIG_4xx) || defined(CONFIG_44x) || defined(CONFIG_MPC85xx)
+#define DAR_DEAR DEAR
+#else
+#define DAR_DEAR DAR
+#endif
+
+/* Device Control Registers */
+
+#define DCRN_BEAR 0x090 /* Bus Error Address Register */
+#define DCRN_BESR 0x091 /* Bus Error Syndrome Register */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+#define DCRN_DMACC0 0x0C4 /* DMA Chained Count Register 0 */
+#define DCRN_DMACC1 0x0CC /* DMA Chained Count Register 1 */
+#define DCRN_DMACC2 0x0D4 /* DMA Chained Count Register 2 */
+#define DCRN_DMACC3 0x0DC /* DMA Chained Count Register 3 */
+#define DCRN_DMACR0 0x0C0 /* DMA Channel Control Register 0 */
+#define DCRN_DMACR1 0x0C8 /* DMA Channel Control Register 1 */
+#define DCRN_DMACR2 0x0D0 /* DMA Channel Control Register 2 */
+#define DCRN_DMACR3 0x0D8 /* DMA Channel Control Register 3 */
+#define DCRN_DMACT0 0x0C1 /* DMA Count Register 0 */
+#define DCRN_DMACT1 0x0C9 /* DMA Count Register 1 */
+#define DCRN_DMACT2 0x0D1 /* DMA Count Register 2 */
+#define DCRN_DMACT3 0x0D9 /* DMA Count Register 3 */
+#define DCRN_DMADA0 0x0C2 /* DMA Destination Address Register 0 */
+#define DCRN_DMADA1 0x0CA /* DMA Destination Address Register 1 */
+#define DCRN_DMADA2 0x0D2 /* DMA Destination Address Register 2 */
+#define DCRN_DMADA3 0x0DA /* DMA Destination Address Register 3 */
+#define DCRN_DMASA0 0x0C3 /* DMA Source Address Register 0 */
+#define DCRN_DMASA1 0x0CB /* DMA Source Address Register 1 */
+#define DCRN_DMASA2 0x0D3 /* DMA Source Address Register 2 */
+#define DCRN_DMASA3 0x0DB /* DMA Source Address Register 3 */
+#define DCRN_DMASR 0x0E0 /* DMA Status Register */
+#define DCRN_EXIER 0x042 /* External Interrupt Enable Register */
+#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
+#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
+#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
+#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
+#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
+#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
+#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
+#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
+#define DCRN_EXISR 0x040 /* External Interrupt Status Register */
+#define DCRN_IOCR 0x0A0 /* Input/Output Configuration Register */
+#define IOCR_E0TE 0x80000000
+#define IOCR_E0LP 0x40000000
+#define IOCR_E1TE 0x20000000
+#define IOCR_E1LP 0x10000000
+#define IOCR_E2TE 0x08000000
+#define IOCR_E2LP 0x04000000
+#define IOCR_E3TE 0x02000000
+#define IOCR_E3LP 0x01000000
+#define IOCR_E4TE 0x00800000
+#define IOCR_E4LP 0x00400000
+#define IOCR_EDT 0x00080000
+#define IOCR_SOR 0x00040000
+#define IOCR_EDO 0x00008000
+#define IOCR_2XC 0x00004000
+#define IOCR_ATC 0x00002000
+#define IOCR_SPD 0x00001000
+#define IOCR_BEM 0x00000800
+#define IOCR_PTD 0x00000400
+#define IOCR_ARE 0x00000080
+#define IOCR_DRC 0x00000020
+#define IOCR_RDM(x) (((x) & 0x3) << 3)
+#define IOCR_TCS 0x00000004
+#define IOCR_SCS 0x00000002
+#define IOCR_SPC 0x00000001
+
+/* System-On-Chip Version Register */
+
+/* System-On-Chip Version Register (SVR) field extraction */
+
+#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
+#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */
+
+#define SVR_CID(svr) (((svr) >> 28) & 0x0F) /* Company or manufacturer ID */
+#define SVR_SOCOP(svr) (((svr) >> 22) & 0x3F) /* SOC integration options */
+#define SVR_SID(svr) (((svr) >> 16) & 0x3F) /* SOC ID */
+#define SVR_PROC(svr) (((svr) >> 12) & 0x0F) /* Process revision field */
+#define SVR_MFG(svr) (((svr) >> 8) & 0x0F) /* Manufacturing revision */
+#define SVR_MJREV(svr) (((svr) >> 4) & 0x0F) /* Major SOC design revision indicator */
+#define SVR_MNREV(svr) (((svr) >> 0) & 0x0F) /* Minor SOC design revision indicator */
+
+/* Processor Version Register */
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+
+/*
+ * AMCC has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+
+/* e600 core PVR fields */
+
+#define PVR_E600_VER(pvr) (((pvr) >> 15) & 0xFFFF) /* Version/type */
+#define PVR_E600_TECH(pvr) (((pvr) >> 12) & 0xF) /* Technology */
+#define PVR_E600_MAJ(pvr) (((pvr) >> 8) & 0xF) /* Major revision */
+#define PVR_E600_MIN(pvr) (((pvr) >> 0) & 0xFF) /* Minor revision */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_405GP_RB 0x40110040
+#define PVR_405GP_RC 0x40110082
+#define PVR_405GP_RD 0x401100C4
+#define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */
+#define PVR_405CR_RA 0x40110041
+#define PVR_405CR_RB 0x401100C5
+#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */
+#define PVR_405EP_RA 0x51210950
+#define PVR_405GPR_RB 0x50910951
+#define PVR_405EZ_RA 0x41511460
+#define PVR_405EXR2_RA 0x12911471 /* 405EXr rev A/B without Security */
+#define PVR_405EX1_RA 0x12911477 /* 405EX rev A/B with Security */
+#define PVR_405EXR1_RC 0x1291147B /* 405EXr rev C with Security */
+#define PVR_405EXR2_RC 0x12911479 /* 405EXr rev C without Security */
+#define PVR_405EX1_RC 0x1291147F /* 405EX rev C with Security */
+#define PVR_405EX2_RC 0x1291147D /* 405EX rev C without Security */
+#define PVR_405EXR1_RD 0x12911472 /* 405EXr rev D with Security */
+#define PVR_405EXR2_RD 0x12911470 /* 405EXr rev D without Security */
+#define PVR_405EX1_RD 0x12911475 /* 405EX rev D with Security */
+#define PVR_405EX2_RD 0x12911473 /* 405EX rev D without Security */
+#define PVR_440GP_RB 0x40120440
+#define PVR_440GP_RC 0x40120481
+#define PVR_440EP_RA 0x42221850
+#define PVR_440EP_RB 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
+#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
+#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA 0x216218D0 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA 0x216218D4 /* 440GRX rev A without Security / Kasumi */
+#define PVR_440GX_RA 0x51B21850
+#define PVR_440GX_RB 0x51B21851
+#define PVR_440GX_RC 0x51B21892
+#define PVR_440GX_RF 0x51B21894
+#define PVR_405EP_RB 0x51210950
+#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */
+#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */
+#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */
+#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */
+#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */
+#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */
+#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */
+#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */
+#define PVR_460EX_SE_RA 0x130218A2 /* 460EX rev A with Security Engine */
+#define PVR_460EX_RA 0x130218A3 /* 460EX rev A without Security Engine */
+#define PVR_460EX_RB 0x130218A4 /* 460EX rev B with and without Sec Eng*/
+#define PVR_460GT_SE_RA 0x130218A0 /* 460GT rev A with Security Engine */
+#define PVR_460GT_RA 0x130218A1 /* 460GT rev A without Security Engine */
+#define PVR_460GT_RB 0x130218A5 /* 460GT rev B with and without Sec Eng*/
+#define PVR_460SX_RA 0x13541800 /* 460SX rev A */
+#define PVR_460SX_RA_V1 0x13541801 /* 460SX rev A Variant 1 Security disabled */
+#define PVR_460GX_RA 0x13541802 /* 460GX rev A */
+#define PVR_460GX_RA_V1 0x13541803 /* 460GX rev A Variant 1 Security disabled */
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
+#define PVR_7400 0x000C0000
+#define PVR_7410 0x800C0000
+#define PVR_7450 0x80000000
+
+#define PVR_85xx 0x80200000
+#define PVR_85xx_REV1 (PVR_85xx | 0x0010)
+#define PVR_85xx_REV2 (PVR_85xx | 0x0020)
+
+#define PVR_86xx 0x80040000
+
+#define PVR_VIRTEX5 0x7ff21912
+
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821 0x00500000
+#define PVR_823 PVR_821
+#define PVR_850 PVR_821
+#define PVR_860 PVR_821
+#define PVR_7400 0x000C0000
+#define PVR_8240 0x00810100
+
+/*
+ * PowerQUICC II family processors report different PVR values depending
+ * on silicon process (HiP3, HiP4, HiP7, etc.)
+ */
+#define PVR_8260 PVR_8240
+#define PVR_8260_HIP3 0x00810101
+#define PVR_8260_HIP4 0x80811014
+#define PVR_8260_HIP7 0x80822011
+#define PVR_8260_HIP7R1 0x80822013
+#define PVR_8260_HIP7RA 0x80822014
+
+/*
+ * MPC 52xx
+ */
+#define PVR_5200 0x80822011
+#define PVR_5200B 0x80822014
+
+/*
+ * System Version Register
+ */
+
+/* System Version Register (SVR) field extraction */
+
+#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
+#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */
+
+#define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */
+
+#define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */
+#define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */
+
+#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
+#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/
+
+/* Some parts define SVR[0:23] as the SOC version */
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */
+
+/* whether MPC8xxxE (i.e. has SEC) */
+#if defined(CONFIG_MPC85xx)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+#else
+#if defined(CONFIG_MPC83xx)
+#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
+#endif
+#endif
+
+#define IS_SVR_REV(svr, maj, min) \
+ ((SVR_MAJ(svr) == maj) && (SVR_MIN(svr) == min))
+
+/*
+ * SVR_SOC_VER() Version Values
+ */
+
+#define SVR_8533 0x803400
+#define SVR_8533_E 0x803C00
+#define SVR_8535 0x803701
+#define SVR_8535_E 0x803F01
+#define SVR_8536 0x803700
+#define SVR_8536_E 0x803F00
+#define SVR_8540 0x803000
+#define SVR_8541 0x807200
+#define SVR_8541_E 0x807A00
+#define SVR_8543 0x803200
+#define SVR_8543_E 0x803A00
+#define SVR_8544 0x803401
+#define SVR_8544_E 0x803C01
+#define SVR_8545 0x803102
+#define SVR_8545_E 0x803902
+#define SVR_8547_E 0x803901
+#define SVR_8548 0x803100
+#define SVR_8548_E 0x803900
+#define SVR_8555 0x807100
+#define SVR_8555_E 0x807900
+#define SVR_8560 0x807000
+#define SVR_8567 0x807600
+#define SVR_8567_E 0x807E00
+#define SVR_8568 0x807500
+#define SVR_8568_E 0x807D00
+#define SVR_8569 0x808000
+#define SVR_8569_E 0x808800
+#define SVR_8572 0x80E000
+#define SVR_8572_E 0x80E800
+#define SVR_P1011 0x80E500
+#define SVR_P1011_E 0x80ED00
+#define SVR_P1012 0x80E501
+#define SVR_P1012_E 0x80ED01
+#define SVR_P1013 0x80E700
+#define SVR_P1013_E 0x80EF00
+#define SVR_P1020 0x80E400
+#define SVR_P1020_E 0x80EC00
+#define SVR_P1021 0x80E401
+#define SVR_P1021_E 0x80EC01
+#define SVR_P1022 0x80E600
+#define SVR_P1022_E 0x80EE00
+#define SVR_P2010 0x80E300
+#define SVR_P2010_E 0x80EB00
+#define SVR_P2020 0x80E200
+#define SVR_P2020_E 0x80EA00
+#define SVR_P4040 0x820100
+#define SVR_P4040_E 0x820900
+#define SVR_P4080 0x820000
+#define SVR_P4080_E 0x820800
+
+#define SVR_8610 0x80A000
+#define SVR_8641 0x809000
+#define SVR_8641D 0x809001
+
+#define SVR_Unknown 0xFFFFFF
+
+#define _GLOBAL(n)\
+ .globl n;\
+n:
+
+/* Macros for setting and retrieving special purpose registers */
+
+#define stringify(s) tostring(s)
+#define tostring(s) #s
+
+#define mfdcr(rn) ({unsigned int rval; \
+ asm volatile("mfdcr %0," stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtdcr(rn, v) asm volatile("mtdcr " stringify(rn) ",%0" : : "r" (v))
+
+#define mfmsr() ({unsigned int rval; \
+ asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
+
+#define mfspr(rn) ({unsigned int rval; \
+ asm volatile("mfspr %0," stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtspr(rn, v) asm volatile("mtspr " stringify(rn) ",%0" : : "r" (v))
+
+#define tlbie(v) asm volatile("tlbie %0 \n sync" : : "r" (v))
+
+/* Segment Registers */
+
+#define SR0 0
+#define SR1 1
+#define SR2 2
+#define SR3 3
+#define SR4 4
+#define SR5 5
+#define SR6 6
+#define SR7 7
+#define SR8 8
+#define SR9 9
+#define SR10 10
+#define SR11 11
+#define SR12 12
+#define SR13 13
+#define SR14 14
+#define SR15 15
+
+#ifndef __ASSEMBLY__
+
+struct cpu_type {
+ char name[15];
+ u32 soc_ver;
+ u32 num_cores;
+};
+
+struct cpu_type *identify_cpu(u32 ver);
+
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#define CPU_TYPE_ENTRY(n, v, nc) \
+ { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), }
+#else
+#if defined(CONFIG_MPC83xx)
+#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
+#endif
+#endif
+
+
+#ifndef CONFIG_MACH_SPECIFIC
+extern int _machine;
+extern int have_of;
+#endif /* CONFIG_MACH_SPECIFIC */
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+/*
+ * This is used to identify the board type from a given PReP board
+ * vendor. Board revision is also made available.
+ */
+extern unsigned char ucSystemType;
+extern unsigned char ucBoardRev;
+extern unsigned char ucBoardRevMaj, ucBoardRevMin;
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/*
+ * Create a new kernel thread.
+ */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Bus types
+ */
+#define EISA_bus 0
+#define EISA_bus__is_a_macro /* for versions in ksyms.c */
+#define MCA_bus 0
+#define MCA_bus__is_a_macro /* for versions in ksyms.c */
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+
+/*
+ * this is the minimum allowable io space due to the location
+ * of the io areas on prep (first one at 0x80000000) but
+ * as soon as I get around to remapping the io areas with the BATs
+ * to match the mac we can raise this. -- Cort
+ */
+#define TASK_SIZE (0x80000000UL)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct thread_struct {
+ unsigned long ksp; /* Kernel stack pointer */
+ unsigned long wchan; /* Event task is sleeping on */
+ struct pt_regs *regs; /* Pointer to saved register state */
+ mm_segment_t fs; /* for get_fs() validation */
+ void *pgdir; /* root of page-table tree */
+ signed long last_syscall;
+ double fpr[32]; /* Complete floating point set */
+ unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */
+ unsigned long fpscr; /* Floating point status */
+#ifdef CONFIG_ALTIVEC
+ vector128 vr[32]; /* Complete AltiVec set */
+ vector128 vscr; /* AltiVec status */
+ unsigned long vrsave;
+#endif /* CONFIG_ALTIVEC */
+};
+
+#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD { \
+ INIT_SP, /* ksp */ \
+ 0, /* wchan */ \
+ (struct pt_regs *)INIT_SP - 1, /* regs */ \
+ KERNEL_DS, /*fs*/ \
+ swapper_pg_dir, /* pgdir */ \
+ 0, /* last_syscall */ \
+ {0}, 0, 0 \
+}
+
+/*
+ * Note: the vm_start and vm_end fields here should *not*
+ * be in kernel space. (Could vm_end == vm_start perhaps?)
+ */
+#define INIT_MMAP { &init_mm, 0, 0x1000, NULL, \
+ PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \
+ 1, NULL, NULL }
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+static inline unsigned long thread_saved_pc(struct thread_struct *t)
+{
+ return (t->regs) ? t->regs->nip : 0;
+}
+
+#define copy_segments(tsk, mm) do { } while (0)
+#define release_segments(mm) do { } while (0)
+#define forget_segments() do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) ((tsk)->thread.regs->nip)
+#define KSTK_ESP(tsk) ((tsk)->thread.regs->gpr[1])
+
+/*
+ * NOTE! The task struct and the stack go together
+ */
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define alloc_task_struct() \
+ ((struct task_struct *) __get_free_pages(GFP_KERNEL,1))
+#define free_task_struct(p) free_pages((unsigned long)(p),1)
+#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count)
+
+/* in process.c - for early bootup debug -- Cort */
+int ll_printk(const char *, ...);
+void ll_puts(const char *);
+
+#define init_task (init_task_union.task)
+#define init_stack (init_task_union.stack)
+
+/* In misc.c */
+void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#endif /* ndef ASSEMBLY*/
+
+#ifdef CONFIG_MACH_SPECIFIC
+#if defined(CONFIG_8xx)
+#define _machine _MACH_8xx
+#define have_of 0
+#elif defined(CONFIG_OAK)
+#define _machine _MACH_oak
+#define have_of 0
+#elif defined(CONFIG_WALNUT)
+#define _machine _MACH_walnut
+#define have_of 0
+#elif defined(CONFIG_APUS)
+#define _machine _MACH_apus
+#define have_of 0
+#elif defined(CONFIG_GEMINI)
+#define _machine _MACH_gemini
+#define have_of 0
+#elif defined(CONFIG_8260)
+#define _machine _MACH_8260
+#define have_of 0
+#elif defined(CONFIG_SANDPOINT)
+#define _machine _MACH_sandpoint
+#elif defined(CONFIG_HIDDEN_DRAGON)
+#define _machine _MACH_hidden_dragon
+#define have_of 0
+#else
+#error "Machine not defined correctly"
+#endif
+#endif /* CONFIG_MACH_SPECIFIC */
+
+#endif /* __ASM_PPC_PROCESSOR_H */
--- /dev/null
+#ifndef _PPC_PTRACE_H
+#define _PPC_PTRACE_H
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c.
+ */
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC64BRIDGE
+#define PPC_REG unsigned long /*long*/
+#else
+#define PPC_REG unsigned long
+#endif
+struct pt_regs {
+ PPC_REG gpr[32];
+ PPC_REG nip;
+ PPC_REG msr;
+ PPC_REG orig_gpr3; /* Used for restarting system calls */
+ PPC_REG ctr;
+ PPC_REG link;
+ PPC_REG xer;
+ PPC_REG ccr;
+ PPC_REG mq; /* 601 only (not used at present) */
+ /* Used on APUS to hold IPL value. */
+ PPC_REG trap; /* Reason for being here */
+ PPC_REG dar; /* Fault registers */
+ PPC_REG dsisr;
+ PPC_REG result; /* Result of a system call */
+};
+#endif
+
+#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE 64
+
+#define instruction_pointer(regs) ((regs)->nip)
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0 0
+#define PT_R1 1
+#define PT_R2 2
+#define PT_R3 3
+#define PT_R4 4
+#define PT_R5 5
+#define PT_R6 6
+#define PT_R7 7
+#define PT_R8 8
+#define PT_R9 9
+#define PT_R10 10
+#define PT_R11 11
+#define PT_R12 12
+#define PT_R13 13
+#define PT_R14 14
+#define PT_R15 15
+#define PT_R16 16
+#define PT_R17 17
+#define PT_R18 18
+#define PT_R19 19
+#define PT_R20 20
+#define PT_R21 21
+#define PT_R22 22
+#define PT_R23 23
+#define PT_R24 24
+#define PT_R25 25
+#define PT_R26 26
+#define PT_R27 27
+#define PT_R28 28
+#define PT_R29 29
+#define PT_R30 30
+#define PT_R31 31
+
+#define PT_NIP 32
+#define PT_MSR 33
+#ifdef __KERNEL__
+#define PT_ORIG_R3 34
+#endif
+#define PT_CTR 35
+#define PT_LNK 36
+#define PT_XER 37
+#define PT_CCR 38
+#define PT_MQ 39
+
+#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#endif
--- /dev/null
+/* 7/18/95 */
+/*----------------------------------------------------------------------------*/
+/* Residual Data header definitions and prototypes */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for RESIDUAL on PowerPC Reference Platform */
+/* residual.h - Residual data structure passed in r3. */
+/* Load point passed in r4 to boot image. */
+/* For enum's: if given in hex then they are bit significant, */
+/* i.e. only one bit is on for each enum */
+/* Reserved fields must be filled with zeros. */
+
+#ifndef _RESIDUAL_
+#define _RESIDUAL_
+
+#ifndef __ASSEMBLY__
+
+#define MAX_CPUS 32 /* These should be set to the maximum */
+#define MAX_MEMS 64 /* number possible for this system. */
+#define MAX_DEVICES 256 /* Changing these will change the */
+#define AVE_PNP_SIZE 32 /* structure, hence the version of */
+#define MAX_MEM_SEGS 64 /* this header file. */
+
+/*----------------------------------------------------------------------------*/
+/* Public structures... */
+/*----------------------------------------------------------------------------*/
+
+#include "pnp.h"
+
+typedef enum _L1CACHE_TYPE {
+ NoneCAC = 0,
+ SplitCAC = 1,
+ CombinedCAC = 2
+ } L1CACHE_TYPE;
+
+typedef enum _TLB_TYPE {
+ NoneTLB = 0,
+ SplitTLB = 1,
+ CombinedTLB = 2
+ } TLB_TYPE;
+
+typedef enum _FIRMWARE_SUPPORT {
+ Conventional = 0x01,
+ OpenFirmware = 0x02,
+ Diagnostics = 0x04,
+ LowDebug = 0x08,
+ Multiboot = 0x10,
+ LowClient = 0x20,
+ Hex41 = 0x40,
+ FAT = 0x80,
+ ISO9660 = 0x0100,
+ SCSI_InitiatorID_Override = 0x0200,
+ Tape_Boot = 0x0400,
+ FW_Boot_Path = 0x0800
+ } FIRMWARE_SUPPORT;
+
+typedef enum _FIRMWARE_SUPPLIERS {
+ IBMFirmware = 0x00,
+ MotoFirmware = 0x01, /* 7/18/95 */
+ FirmWorks = 0x02, /* 10/5/95 */
+ Bull = 0x03, /* 04/03/96 */
+ } FIRMWARE_SUPPLIERS;
+
+typedef enum _ENDIAN_SWITCH_METHODS {
+ UsePort92 = 0x01,
+ UsePCIConfigA8 = 0x02,
+ UseFF001030 = 0x03,
+ } ENDIAN_SWITCH_METHODS;
+
+typedef enum _SPREAD_IO_METHODS {
+ UsePort850 = 0x00,
+/*UsePCIConfigA8 = 0x02,*/
+ } SPREAD_IO_METHODS;
+
+typedef struct _VPD {
+
+ /* Box dependent stuff */
+ unsigned char PrintableModel[32]; /* Null terminated string.
+ Must be of the form:
+ vvv,<20h>,<model designation>,<0x0>
+ where vvv is the vendor ID
+ e.g. IBM PPS MODEL 6015<0x0> */
+ unsigned char Serial[16]; /* 12/94:
+ Serial Number; must be of the form:
+ vvv<serial number> where vvv is the
+ vendor ID.
+ e.g. IBM60151234567<20h><20h> */
+ unsigned char Reserved[48];
+ unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */
+ unsigned long FirmwareSupports; /* See FirmwareSupport enum */
+ unsigned long NvramSize; /* Size of nvram in bytes */
+ unsigned long NumSIMMSlots;
+ unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */
+ unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */
+ unsigned long SmpIar;
+ unsigned long RAMErrLogOffset; /* Heap offset to error log */
+ unsigned long Reserved5;
+ unsigned long Reserved6;
+ unsigned long ProcessorHz; /* Processor clock frequency in Hertz */
+ unsigned long ProcessorBusHz; /* Processor bus clock frequency */
+ unsigned long Reserved7;
+ unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */
+ unsigned long WordWidth; /* Word width in bits */
+ unsigned long PageSize; /* Page size in bytes */
+ unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache
+ for which coherency is maintained;
+ normally <= CacheLineSize. */
+ unsigned long GranuleSize; /* Unit of lock allocation to avoid */
+ /* false sharing of locks. */
+
+ /* L1 Cache variables */
+ unsigned long CacheSize; /* L1 Cache size in KB. This is the */
+ /* total size of the L1, whether */
+ /* combined or split */
+ unsigned long CacheAttrib; /* L1CACHE_TYPE */
+ unsigned long CacheAssoc; /* L1 Cache associativity. Use this
+ for combined cache. If split, put
+ zeros here. */
+ unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use
+ for combined cache. If split, put
+ zeros here. */
+ /* For split L1 Cache: (= combined if combined cache) */
+ unsigned long I_CacheSize;
+ unsigned long I_CacheAssoc;
+ unsigned long I_CacheLineSize;
+ unsigned long D_CacheSize;
+ unsigned long D_CacheAssoc;
+ unsigned long D_CacheLineSize;
+
+ /* Translation Lookaside Buffer variables */
+ unsigned long TLBSize; /* Total number of TLBs on the system */
+ unsigned long TLBAttrib; /* Combined I+D or split TLB */
+ unsigned long TLBAssoc; /* TLB Associativity. Use this for
+ combined TLB. If split, put zeros
+ here. */
+ /* For split TLB: (= combined if combined TLB) */
+ unsigned long I_TLBSize;
+ unsigned long I_TLBAssoc;
+ unsigned long D_TLBSize;
+ unsigned long D_TLBAssoc;
+
+ unsigned long ExtendedVPD; /* Offset to extended VPD area;
+ null if unused */
+ } VPD;
+
+typedef enum _DEVICE_FLAGS {
+ Enabled = 0x4000, /* 1 - PCI device is enabled */
+ Integrated = 0x2000,
+ Failed = 0x1000, /* 1 - device failed POST code tests */
+ Static = 0x0800, /* 0 - dynamically configurable
+ 1 - static */
+ Dock = 0x0400, /* 0 - not a docking station device
+ 1 - is a docking station device */
+ Boot = 0x0200, /* 0 - device cannot be used for BOOT
+ 1 - can be a BOOT device */
+ Configurable = 0x0100, /* 1 - device is configurable */
+ Disableable = 0x80, /* 1 - device can be disabled */
+ PowerManaged = 0x40, /* 0 - not managed; 1 - managed */
+ ReadOnly = 0x20, /* 1 - device is read only */
+ Removable = 0x10, /* 1 - device is removable */
+ ConsoleIn = 0x08,
+ ConsoleOut = 0x04,
+ Input = 0x02,
+ Output = 0x01
+ } DEVICE_FLAGS;
+
+typedef enum _BUS_ID {
+ ISADEVICE = 0x01,
+ EISADEVICE = 0x02,
+ PCIDEVICE = 0x04,
+ PCMCIADEVICE = 0x08,
+ PNPISADEVICE = 0x10,
+ MCADEVICE = 0x20,
+ MXDEVICE = 0x40, /* Devices on mezzanine bus */
+ PROCESSORDEVICE = 0x80, /* Devices on processor bus */
+ VMEDEVICE = 0x100,
+ } BUS_ID;
+
+typedef struct _DEVICE_ID {
+ unsigned long BusId; /* See BUS_ID enum above */
+ unsigned long DevId; /* Big Endian format */
+ unsigned long SerialNum; /* For multiple usage of a single
+ DevId */
+ unsigned long Flags; /* See DEVICE_FLAGS enum above */
+ unsigned char BaseType; /* See pnp.h for bit definitions */
+ unsigned char SubType; /* See pnp.h for bit definitions */
+ unsigned char Interface; /* See pnp.h for bit definitions */
+ unsigned char Spare;
+ } DEVICE_ID;
+
+typedef union _BUS_ACCESS {
+ struct _PnPAccess{
+ unsigned char CSN;
+ unsigned char LogicalDevNumber;
+ unsigned short ReadDataPort;
+ } PnPAccess;
+ struct _ISAAccess{
+ unsigned char SlotNumber; /* ISA Slot Number generally not
+ available; 0 if unknown */
+ unsigned char LogicalDevNumber;
+ unsigned short ISAReserved;
+ } ISAAccess;
+ struct _MCAAccess{
+ unsigned char SlotNumber;
+ unsigned char LogicalDevNumber;
+ unsigned short MCAReserved;
+ } MCAAccess;
+ struct _PCMCIAAccess{
+ unsigned char SlotNumber;
+ unsigned char LogicalDevNumber;
+ unsigned short PCMCIAReserved;
+ } PCMCIAAccess;
+ struct _EISAAccess{
+ unsigned char SlotNumber;
+ unsigned char FunctionNumber;
+ unsigned short EISAReserved;
+ } EISAAccess;
+ struct _PCIAccess{
+ unsigned char BusNumber;
+ unsigned char DevFuncNumber;
+ unsigned short PCIReserved;
+ } PCIAccess;
+ struct _ProcBusAccess{
+ unsigned char BusNumber;
+ unsigned char BUID;
+ unsigned short ProcBusReserved;
+ } ProcBusAccess;
+ } BUS_ACCESS;
+
+/* Per logical device information */
+typedef struct _PPC_DEVICE {
+ DEVICE_ID DeviceId;
+ BUS_ACCESS BusAccess;
+
+ /* The following three are offsets into the DevicePnPHeap */
+ /* All are in PnP compressed format */
+ unsigned long AllocatedOffset; /* Allocated resource description */
+ unsigned long PossibleOffset; /* Possible resource description */
+ unsigned long CompatibleOffset; /* Compatible device identifiers */
+ } PPC_DEVICE;
+
+typedef enum _CPU_STATE {
+ CPU_GOOD = 0, /* CPU is present, and active */
+ CPU_GOOD_FW = 1, /* CPU is present, and in firmware */
+ CPU_OFF = 2, /* CPU is present, but inactive */
+ CPU_FAILED = 3, /* CPU is present, but failed POST */
+ CPU_NOT_PRESENT = 255 /* CPU not present */
+ } CPU_STATE;
+
+typedef struct _PPC_CPU {
+ unsigned long CpuType; /* Result of mfspr from Processor
+ Version Register (PVR).
+ PVR(0-15) = Version (e.g. 601)
+ PVR(16-31 = EC Level */
+ unsigned char CpuNumber; /* CPU Number for this processor */
+ unsigned char CpuState; /* CPU State, see CPU_STATE enum */
+ unsigned short Reserved;
+ } PPC_CPU;
+
+typedef struct _PPC_MEM {
+ unsigned long SIMMSize; /* 0 - absent or bad
+ 8M, 32M (in MB) */
+ } PPC_MEM;
+
+typedef enum _MEM_USAGE {
+ Other = 0x8000,
+ ResumeBlock = 0x4000, /* for use by power management */
+ SystemROM = 0x2000, /* Flash memory (populated) */
+ UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */
+ IOMemory = 0x0800,
+ SystemIO = 0x0400,
+ SystemRegs = 0x0200,
+ PCIAddr = 0x0100,
+ PCIConfig = 0x80,
+ ISAAddr = 0x40,
+ Unpopulated = 0x20, /* Unpopulated part of System Memory */
+ Free = 0x10, /* Free part of System Memory */
+ BootImage = 0x08, /* BootImage part of System Memory */
+ FirmwareCode = 0x04, /* FirmwareCode part of System Memory */
+ FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */
+ FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/
+ } MEM_USAGE;
+
+typedef struct _MEM_MAP {
+ unsigned long Usage; /* See MEM_USAGE above */
+ unsigned long BasePage; /* Page number measured in 4KB pages */
+ unsigned long PageCount; /* Page count measured in 4KB pages */
+ } MEM_MAP;
+
+typedef struct _RESIDUAL {
+ unsigned long ResidualLength; /* Length of Residual */
+ unsigned char Version; /* of this data structure */
+ unsigned char Revision; /* of this data structure */
+ unsigned short EC; /* of this data structure */
+ /* VPD */
+ VPD VitalProductData;
+ /* CPU */
+ unsigned short MaxNumCpus; /* Max CPUs in this system */
+ unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */
+ /* that there are unpopulated or */
+ /* otherwise unusable cpu locations */
+ PPC_CPU Cpus[MAX_CPUS];
+ /* Memory */
+ unsigned long TotalMemory; /* Total amount of memory installed */
+ unsigned long GoodMemory; /* Total amount of good memory */
+ unsigned long ActualNumMemSegs;
+ MEM_MAP Segs[MAX_MEM_SEGS];
+ unsigned long ActualNumMemories;
+ PPC_MEM Memories[MAX_MEMS];
+ /* Devices */
+ unsigned long ActualNumDevices;
+ PPC_DEVICE Devices[MAX_DEVICES];
+ unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
+ } RESIDUAL;
+
+
+extern RESIDUAL *res;
+extern void print_residual_device_info(void);
+extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
+ unsigned char * DevID, int BaseType,
+ int SubType, int Interface, int n);
+extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
+ int n);
+extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
+ unsigned packet_type,
+ int n);
+extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
+ unsigned packet_type,
+ int n);
+#endif /* __ASSEMBLY__ */
+#endif /* ndef _RESIDUAL_ */
--- /dev/null
+#ifndef _ASM_PPC_SIGCONTEXT_H
+#define _ASM_PPC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+
+struct sigcontext_struct {
+ unsigned long _unused[4];
+ int signal;
+ unsigned long handler;
+ unsigned long oldmask;
+ struct pt_regs *regs;
+};
+
+#endif
--- /dev/null
+#ifndef _ASMPPC_SIGNAL_H
+#define _ASMPPC_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+#endif
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+/* Type of a signal handler. */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * asm/status_led.h
+ *
+ * MPC8xx/MPC8260/MPC5xx based status led support functions
+ */
+
+#ifndef __ASM_STATUS_LED_H__
+#define __ASM_STATUS_LED_H__
+
+/* if not overriden */
+#ifndef CONFIG_BOARD_SPECIFIC_LED
+# if defined(CONFIG_8xx)
+# include <mpc8xx.h>
+# elif defined(CONFIG_8260)
+# include <mpc8260.h>
+# elif defined(CONFIG_5xx)
+# include <mpc5xx.h>
+# else
+# error CPU specific Status LED header file missing.
+#endif
+
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+static inline void __led_init (led_id_t mask, int state)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#ifdef STATUS_LED_PAR
+ immr->STATUS_LED_PAR &= ~mask;
+#endif
+#ifdef STATUS_LED_ODR
+ immr->STATUS_LED_ODR &= ~mask;
+#endif
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ immr->STATUS_LED_DAT &= ~mask;
+ else
+ immr->STATUS_LED_DAT |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ immr->STATUS_LED_DAT |= mask;
+ else
+ immr->STATUS_LED_DAT &= ~mask;
+#endif
+#ifdef STATUS_LED_DIR
+ immr->STATUS_LED_DIR |= mask;
+#endif
+}
+
+static inline void __led_toggle (led_id_t mask)
+{
+ ((immap_t *) CONFIG_SYS_IMMR)->STATUS_LED_DAT ^= mask;
+}
+
+static inline void __led_set (led_id_t mask, int state)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+#if (STATUS_LED_ACTIVE == 0)
+ if (state == STATUS_LED_ON)
+ immr->STATUS_LED_DAT &= ~mask;
+ else
+ immr->STATUS_LED_DAT |= mask;
+#else
+ if (state == STATUS_LED_ON)
+ immr->STATUS_LED_DAT |= mask;
+ else
+ immr->STATUS_LED_DAT &= ~mask;
+#endif
+
+}
+
+#endif
+
+#endif /* __ASM_STATUS_LED_H__ */
--- /dev/null
+#ifndef _PPC_STRING_H_
+#define _PPC_STRING_H_
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_BCOPY
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern int strcasecmp(const char *, const char *);
+extern int strncasecmp(const char *, const char *, int);
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif
--- /dev/null
+#ifndef _PPC_TYPES_H
+#define _PPC_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#endif
+
+typedef struct {
+ __u32 u[4];
+} __attribute__((aligned(16))) vector128;
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* DMA addresses are 32-bits wide */
+typedef u32 dma_addr_t;
+
+#ifdef CONFIG_PHYS_64BIT
+typedef unsigned long long phys_addr_t;
+typedef unsigned long long phys_size_t;
+#else
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef __U_BOOT_H__
+#define __U_BOOT_H__
+
+/*
+ * Board information passed to Linux kernel from U-Boot
+ *
+ * include/asm-ppc/u-boot.h
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ phys_size_t bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
+ || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+ unsigned long bi_immr_base; /* base of IMMR register */
+#endif
+#if defined(CONFIG_MPC5xxx)
+ unsigned long bi_mbar_base; /* base of internal registers */
+#endif
+#if defined(CONFIG_MPC83xx)
+ unsigned long bi_immrbar;
+#endif
+#if defined(CONFIG_MPC8220)
+ unsigned long bi_mbar_base; /* base of internal registers */
+ unsigned long bi_inpfreq; /* Input Freq, In MHz */
+ unsigned long bi_pcifreq; /* PCI Freq, in MHz */
+ unsigned long bi_pevfreq; /* PEV Freq, in MHz */
+ unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
+ unsigned long bi_vcofreq; /* VCO Freq, in MHz */
+#endif
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+#if defined(CONFIG_CPM2)
+ unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
+ unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
+ unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
+ unsigned long bi_vco; /* VCO Out from PLL, in MHz */
+#endif
+#if defined(CONFIG_MPC512X)
+ unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */
+#endif /* CONFIG_MPC512X */
+#if defined(CONFIG_MPC5xxx)
+ unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
+ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
+#endif
+ unsigned long bi_baudrate; /* Console Baudrate */
+#if defined(CONFIG_405) || \
+ defined(CONFIG_405GP) || \
+ defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || \
+ defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || \
+ defined(CONFIG_440)
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
+ unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
+ unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+#endif
+#if defined(CONFIG_HYMOD)
+ hymod_conf_t bi_hymod_conf; /* hymod configuration information */
+#endif
+
+#ifdef CONFIG_HAS_ETH1
+ unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH2
+ unsigned char bi_enet2addr[6]; /* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH3
+ unsigned char bi_enet3addr[6]; /* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH4
+ unsigned char bi_enet4addr[6]; /* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH5
+ unsigned char bi_enet5addr[6]; /* OLD: see README.enetaddr */
+#endif
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+ defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ unsigned int bi_opbfreq; /* OPB clock in Hz */
+ int bi_iic_fast[2]; /* Use fast i2c mode */
+#endif
+#if defined(CONFIG_NX823)
+ unsigned char bi_sernum[8];
+#endif
+#if defined(CONFIG_4xx)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ int bi_phynum[4]; /* Determines phy mapping */
+ int bi_phymode[4]; /* Determines phy mode */
+#elif defined(CONFIG_405EP) || defined(CONFIG_440)
+ int bi_phynum[2]; /* Determines phy mapping */
+ int bi_phymode[2]; /* Determines phy mode */
+#else
+ int bi_phynum[1]; /* Determines phy mapping */
+ int bi_phymode[1]; /* Determines phy mode */
+#endif
+#endif /* defined(CONFIG_4xx) */
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __U_BOOT_H__ */
--- /dev/null
+#ifndef _ASM_POWERPC_UNALIGNED_H
+#define _ASM_POWERPC_UNALIGNED_H
+
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UNALIGNED_H */
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef XILINX_IRQ_H
+#define XILINX_IRQ_H
+
+#define intc XPAR_INTC_0_BASEADDR
+#define ISR (intc + (0 * 4)) /* Interrupt Status Register */
+#define IPR (intc + (1 * 4)) /* Interrupt Pending Register */
+#define IER (intc + (2 * 4)) /* Interrupt Enable Register */
+#define IAR (intc + (3 * 4)) /* Interrupt Acknowledge Register */
+#define SIE (intc + (4 * 4)) /* Set Interrupt Enable bits */
+#define CIE (intc + (5 * 4)) /* Clear Interrupt Enable bits */
+#define IVR (intc + (6 * 4)) /* Interrupt Vector Register */
+#define MER (intc + (7 * 4)) /* Master Enable Register */
+
+#define IRQ_MASK(irq) (1 << (irq & 0x1f))
+
+#define IRQ_MAX XPAR_INTC_MAX_NUM_INTR_INPUTS
+
+#endif
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(ARCH).a
+
+SOBJS-y += ppccache.o
+SOBJS-y += ppcstring.o
+SOBJS-y += ticks.o
+SOBJS-y += reloc.o
+
+COBJS-y += bat_rw.o
+COBJS-y += board.o
+COBJS-y += bootm.o
+COBJS-y += cache.o
+COBJS-y += extable.o
+COBJS-y += interrupts.o
+COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
+COBJS-y += time.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+$(LIB): $(obj).depend $(OBJS)
+ @if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\
+ then \
+ echo "ERROR: Your compiler doesn't generate .fixup sections!";\
+ echo " Upgrade to a recent toolchain."; \
+ exit 1; \
+ fi;
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int write_bat (ppc_bat_t bat, unsigned long upper, unsigned long lower)
+{
+ int batn = -1;
+
+ sync();
+
+ switch (bat) {
+ case DBAT0:
+ mtspr (DBAT0L, lower);
+ mtspr (DBAT0U, upper);
+ batn = 0;
+ break;
+ case IBAT0:
+ mtspr (IBAT0L, lower);
+ mtspr (IBAT0U, upper);
+ break;
+ case DBAT1:
+ mtspr (DBAT1L, lower);
+ mtspr (DBAT1U, upper);
+ batn = 1;
+ break;
+ case IBAT1:
+ mtspr (IBAT1L, lower);
+ mtspr (IBAT1U, upper);
+ break;
+ case DBAT2:
+ mtspr (DBAT2L, lower);
+ mtspr (DBAT2U, upper);
+ batn = 2;
+ break;
+ case IBAT2:
+ mtspr (IBAT2L, lower);
+ mtspr (IBAT2U, upper);
+ break;
+ case DBAT3:
+ mtspr (DBAT3L, lower);
+ mtspr (DBAT3U, upper);
+ batn = 3;
+ break;
+ case IBAT3:
+ mtspr (IBAT3L, lower);
+ mtspr (IBAT3U, upper);
+ break;
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ mtspr (DBAT4L, lower);
+ mtspr (DBAT4U, upper);
+ batn = 4;
+ break;
+ case IBAT4:
+ mtspr (IBAT4L, lower);
+ mtspr (IBAT4U, upper);
+ break;
+ case DBAT5:
+ mtspr (DBAT5L, lower);
+ mtspr (DBAT5U, upper);
+ batn = 5;
+ break;
+ case IBAT5:
+ mtspr (IBAT5L, lower);
+ mtspr (IBAT5U, upper);
+ break;
+ case DBAT6:
+ mtspr (DBAT6L, lower);
+ mtspr (DBAT6U, upper);
+ batn = 6;
+ break;
+ case IBAT6:
+ mtspr (IBAT6L, lower);
+ mtspr (IBAT6U, upper);
+ break;
+ case DBAT7:
+ mtspr (DBAT7L, lower);
+ mtspr (DBAT7U, upper);
+ batn = 7;
+ break;
+ case IBAT7:
+ mtspr (IBAT7L, lower);
+ mtspr (IBAT7U, upper);
+ break;
+#endif
+ default:
+ return (-1);
+ }
+
+#ifdef CONFIG_ADDR_MAP
+ if ((gd->flags & GD_FLG_RELOC) && (batn >= 0)) {
+ phys_size_t size;
+ if (!BATU_VALID(upper))
+ size = 0;
+ else
+ size = BATU_SIZE(upper);
+ addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
+ size, batn);
+ }
+#endif
+
+ sync();
+ isync();
+
+ return (0);
+}
+
+int read_bat (ppc_bat_t bat, unsigned long *upper, unsigned long *lower)
+{
+ unsigned long register u;
+ unsigned long register l;
+
+ switch (bat) {
+ case DBAT0:
+ l = mfspr (DBAT0L);
+ u = mfspr (DBAT0U);
+ break;
+ case IBAT0:
+ l = mfspr (IBAT0L);
+ u = mfspr (IBAT0U);
+ break;
+ case DBAT1:
+ l = mfspr (DBAT1L);
+ u = mfspr (DBAT1U);
+ break;
+ case IBAT1:
+ l = mfspr (IBAT1L);
+ u = mfspr (IBAT1U);
+ break;
+ case DBAT2:
+ l = mfspr (DBAT2L);
+ u = mfspr (DBAT2U);
+ break;
+ case IBAT2:
+ l = mfspr (IBAT2L);
+ u = mfspr (IBAT2U);
+ break;
+ case DBAT3:
+ l = mfspr (DBAT3L);
+ u = mfspr (DBAT3U);
+ break;
+ case IBAT3:
+ l = mfspr (IBAT3L);
+ u = mfspr (IBAT3U);
+ break;
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ l = mfspr (DBAT4L);
+ u = mfspr (DBAT4U);
+ break;
+ case IBAT4:
+ l = mfspr (IBAT4L);
+ u = mfspr (IBAT4U);
+ break;
+ case DBAT5:
+ l = mfspr (DBAT5L);
+ u = mfspr (DBAT5U);
+ break;
+ case IBAT5:
+ l = mfspr (IBAT5L);
+ u = mfspr (IBAT5U);
+ break;
+ case DBAT6:
+ l = mfspr (DBAT6L);
+ u = mfspr (DBAT6U);
+ break;
+ case IBAT6:
+ l = mfspr (IBAT6L);
+ u = mfspr (IBAT6U);
+ break;
+ case DBAT7:
+ l = mfspr (DBAT7L);
+ u = mfspr (DBAT7U);
+ break;
+ case IBAT7:
+ l = mfspr (IBAT7L);
+ u = mfspr (IBAT7U);
+ break;
+#endif
+ default:
+ return (-1);
+ }
+
+ *upper = u;
+ *lower = l;
+
+ return (0);
+}
+
+void print_bats(void)
+{
+ printf("BAT registers:\n");
+
+ printf ("\tIBAT0L = 0x%08X ", mfspr (IBAT0L));
+ printf ("\tIBAT0U = 0x%08X\n", mfspr (IBAT0U));
+ printf ("\tDBAT0L = 0x%08X ", mfspr (DBAT0L));
+ printf ("\tDBAT0U = 0x%08X\n", mfspr (DBAT0U));
+ printf ("\tIBAT1L = 0x%08X ", mfspr (IBAT1L));
+ printf ("\tIBAT1U = 0x%08X\n", mfspr (IBAT1U));
+ printf ("\tDBAT1L = 0x%08X ", mfspr (DBAT1L));
+ printf ("\tDBAT1U = 0x%08X\n", mfspr (DBAT1U));
+ printf ("\tIBAT2L = 0x%08X ", mfspr (IBAT2L));
+ printf ("\tIBAT2U = 0x%08X\n", mfspr (IBAT2U));
+ printf ("\tDBAT2L = 0x%08X ", mfspr (DBAT2L));
+ printf ("\tDBAT2U = 0x%08X\n", mfspr (DBAT2U));
+ printf ("\tIBAT3L = 0x%08X ", mfspr (IBAT3L));
+ printf ("\tIBAT3U = 0x%08X\n", mfspr (IBAT3U));
+ printf ("\tDBAT3L = 0x%08X ", mfspr (DBAT3L));
+ printf ("\tDBAT3U = 0x%08X\n", mfspr (DBAT3U));
+
+#ifdef CONFIG_HIGH_BATS
+ printf ("\tIBAT4L = 0x%08X ", mfspr (IBAT4L));
+ printf ("\tIBAT4U = 0x%08X\n", mfspr (IBAT4U));
+ printf ("\tDBAT4L = 0x%08X ", mfspr (DBAT4L));
+ printf ("\tDBAT4U = 0x%08X\n", mfspr (DBAT4U));
+ printf ("\tIBAT5L = 0x%08X ", mfspr (IBAT5L));
+ printf ("\tIBAT5U = 0x%08X\n", mfspr (IBAT5U));
+ printf ("\tDBAT5L = 0x%08X ", mfspr (DBAT5L));
+ printf ("\tDBAT5U = 0x%08X\n", mfspr (DBAT5U));
+ printf ("\tIBAT6L = 0x%08X ", mfspr (IBAT6L));
+ printf ("\tIBAT6U = 0x%08X\n", mfspr (IBAT6U));
+ printf ("\tDBAT6L = 0x%08X ", mfspr (DBAT6L));
+ printf ("\tDBAT6U = 0x%08X\n", mfspr (DBAT6U));
+ printf ("\tIBAT7L = 0x%08X ", mfspr (IBAT7L));
+ printf ("\tIBAT7U = 0x%08X\n", mfspr (IBAT7U));
+ printf ("\tDBAT7L = 0x%08X ", mfspr (DBAT7L));
+ printf ("\tDBAT7U = 0x%08X\n", mfspr (DBAT7U));
+#endif
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <malloc.h>
+#include <stdio_dev.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#ifdef CONFIG_5xx
+#include <mpc5xx.h>
+#endif
+#ifdef CONFIG_MPC5xxx
+#include <mpc5xxx.h>
+#endif
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+#endif
+#if defined(CONFIG_CMD_SCSI)
+#include <scsi.h>
+#endif
+#if defined(CONFIG_CMD_KGDB)
+#include <kgdb.h>
+#endif
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+#include <net.h>
+#ifdef CONFIG_GENERIC_MMC
+#include <mmc.h>
+#endif
+#include <serial.h>
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+#if !defined(CONFIG_CPM2)
+#include <commproc.h>
+#endif
+#endif
+#include <version.h>
+#if defined(CONFIG_BAB7xx)
+#include <w83c553f.h>
+#endif
+#include <dtt.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+#if defined(CONFIG_LOGBUFFER)
+#include <logbuff.h>
+#endif
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#include <asm/cache.h>
+#endif
+#ifdef CONFIG_PS2KBD
+#include <keyboard.h>
+#endif
+
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+
+#ifdef CONFIG_MP
+#include <asm/mp.h>
+#endif
+
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
+
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
+extern int update_flash_size (int flash_size);
+#endif
+
+#if defined(CONFIG_SC3)
+extern void sc3_read_eeprom(void);
+#endif
+
+#if defined(CONFIG_CMD_DOC)
+void doc_init (void);
+#endif
+#if defined(CONFIG_HARD_I2C) || \
+ defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+#include <spi.h>
+#include <nand.h>
+
+static char *failed = "*** failed ***\n";
+
+#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
+extern flash_info_t flash_info[];
+#endif
+
+#if defined(CONFIG_START_IDE)
+extern int board_start_ide(void);
+#endif
+#include <environment.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_ENV_IS_EMBEDDED)
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+ defined(CONFIG_ENV_IS_IN_NVRAM)
+#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
+#else
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#endif
+
+#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
+#define CONFIG_SYS_MEM_TOP_HIDE 0
+#endif
+
+extern ulong __init_end;
+extern ulong _end;
+ulong monitor_flash_len;
+
+#if defined(CONFIG_CMD_BEDBUG)
+#include <bedbug/type.h>
+#endif
+
+/************************************************************************
+ * Utilities *
+ ************************************************************************
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+/************************************************************************
+ * Init Utilities *
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * but let's get it working (again) first...
+ */
+
+static int init_baudrate (void)
+{
+ char tmp[64]; /* long enough for environment variables */
+ int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+ gd->baudrate = (i > 0)
+ ? (int) simple_strtoul (tmp, NULL, 10)
+ : CONFIG_BAUDRATE;
+ return (0);
+}
+
+/***********************************************************************/
+
+void __board_add_ram_info(int use_default)
+{
+ /* please define platform specific board_add_ram_info() */
+}
+void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
+
+
+static int init_func_ram (void)
+{
+#ifdef CONFIG_BOARD_TYPES
+ int board_type = gd->board_type;
+#else
+ int board_type = 0; /* use dummy arg */
+#endif
+ puts ("DRAM: ");
+
+ if ((gd->ram_size = initdram (board_type)) > 0) {
+ print_size (gd->ram_size, "");
+ board_add_ram_info(0);
+ putc('\n');
+ return (0);
+ }
+ puts (failed);
+ return (1);
+}
+
+/***********************************************************************/
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c (void)
+{
+ puts ("I2C: ");
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ puts ("ready\n");
+ return (0);
+}
+#endif
+
+#if defined(CONFIG_HARD_SPI)
+static int init_func_spi (void)
+{
+ puts ("SPI: ");
+ spi_init ();
+ puts ("ready\n");
+ return (0);
+}
+#endif
+
+/***********************************************************************/
+
+#if defined(CONFIG_WATCHDOG)
+static int init_func_watchdog_init (void)
+{
+ puts (" Watchdog enabled\n");
+ WATCHDOG_RESET ();
+ return (0);
+}
+# define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
+
+static int init_func_watchdog_reset (void)
+{
+ WATCHDOG_RESET ();
+ return (0);
+}
+# define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
+#else
+# define INIT_FUNC_WATCHDOG_INIT /* undef */
+# define INIT_FUNC_WATCHDOG_RESET /* undef */
+#endif /* CONFIG_WATCHDOG */
+
+/************************************************************************
+ * Initialization sequence *
+ ************************************************************************
+ */
+
+init_fnc_t *init_sequence[] = {
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ probecpu,
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+ board_early_init_f,
+#endif
+#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
+ get_clocks, /* get CPU and bus clocks (etc.) */
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+ && !defined(CONFIG_TQM885D)
+ adjust_sdram_tbs_8xx,
+#endif
+ init_timebase,
+#endif
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+#if !defined(CONFIG_CPM2)
+ dpram_init,
+#endif
+#endif
+#if defined(CONFIG_BOARD_POSTCLK_INIT)
+ board_postclk_init,
+#endif
+ env_init,
+#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
+ get_clocks_866, /* get CPU and bus clocks according to the environment variable */
+ sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */
+ init_timebase,
+#endif
+ init_baudrate,
+ serial_init,
+ console_init_f,
+ display_options,
+#if defined(CONFIG_8260)
+ prt_8260_rsr,
+ prt_8260_clks,
+#endif /* CONFIG_8260 */
+#if defined(CONFIG_MPC83xx)
+ prt_83xx_rsr,
+#endif
+ checkcpu,
+#if defined(CONFIG_MPC5xxx)
+ prt_mpc5xxx_clks,
+#endif /* CONFIG_MPC5xxx */
+#if defined(CONFIG_MPC8220)
+ prt_mpc8220_clks,
+#endif
+ checkboard,
+ INIT_FUNC_WATCHDOG_INIT
+#if defined(CONFIG_MISC_INIT_F)
+ misc_init_f,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ init_func_i2c,
+#endif
+#if defined(CONFIG_HARD_SPI)
+ init_func_spi,
+#endif
+#ifdef CONFIG_POST
+ post_init_f,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+ init_func_ram,
+#if defined(CONFIG_SYS_DRAM_TEST)
+ testdram,
+#endif /* CONFIG_SYS_DRAM_TEST */
+ INIT_FUNC_WATCHDOG_RESET
+
+ NULL, /* Terminate this list */
+};
+
+ulong get_effective_memsize(void)
+{
+#ifndef CONFIG_VERY_BIG_RAM
+ return gd->ram_size;
+#else
+ /* limit stack to what we can reasonable map */
+ return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size);
+#endif
+}
+
+/************************************************************************
+ *
+ * This is the first part of the initialization sequence that is
+ * implemented in C, but still running from ROM.
+ *
+ * The main purpose is to provide a (serial) console interface as
+ * soon as possible (so we can see any error messages), and to
+ * initialize the RAM so that we can relocate the monitor code to
+ * RAM.
+ *
+ * Be aware of the restrictions: global data is read-only, BSS is not
+ * initialized, and stack space is limited to a few kB.
+ *
+ ************************************************************************
+ */
+
+#ifdef CONFIG_LOGBUFFER
+unsigned long logbuffer_base(void)
+{
+ return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+}
+#endif
+
+void board_init_f (ulong bootflag)
+{
+ bd_t *bd;
+ ulong len, addr, addr_sp;
+ ulong *s;
+ gd_t *id;
+ init_fnc_t **init_fnc_ptr;
+#ifdef CONFIG_PRAM
+ int i;
+ ulong reg;
+ uchar tmp[64]; /* long enough for environment variables */
+#endif
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+ /* compiler optimization barrier needed for GCC >= 3.4 */
+ __asm__ __volatile__("": : :"memory");
+
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
+ !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
+ !defined(CONFIG_MPC86xx)
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+#endif
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+ if ((*init_fnc_ptr) () != 0) {
+ hang ();
+ }
+ }
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ *
+ * Reserve memory at end of RAM for (top down in that order):
+ * - area that won't get touched by U-Boot and Linux (optional)
+ * - kernel log buffer
+ * - protected RAM
+ * - LCD framebuffer
+ * - monitor code
+ * - board info struct
+ */
+ len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
+
+ /*
+ * Subtract specified amount of memory to hide so that it won't
+ * get "touched" at all by U-Boot. By fixing up gd->ram_size
+ * the Linux kernel should now get passed the now "corrected"
+ * memory size and won't touch it either. This should work
+ * for arch/ppc and arch/powerpc. Only Linux board ports in
+ * arch/powerpc with bootwrapper support, that recalculate the
+ * memory size from the SDRAM controller setup will have to
+ * get fixed.
+ */
+ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+
+ addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+ /*
+ * We need to make sure the location we intend to put secondary core
+ * boot code is reserved and not used by any part of u-boot
+ */
+ if (addr > determine_mp_bootpg()) {
+ addr = determine_mp_bootpg();
+ debug ("Reserving MP boot page to %08lx\n", addr);
+ }
+#endif
+
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+ /* reserve kernel log buffer */
+ addr -= (LOGBUFF_RESERVE);
+ debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+#endif
+#endif
+
+#ifdef CONFIG_PRAM
+ /*
+ * reserve protected RAM
+ */
+ i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
+ reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+ addr -= (reg << 10); /* size is in kB */
+ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+#endif /* CONFIG_PRAM */
+
+ /* round down to next 4 kB limit */
+ addr &= ~(4096 - 1);
+ debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+#ifdef CONFIG_LCD
+ /* reserve memory for LCD display (always full pages) */
+ addr = lcd_setmem (addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_LCD */
+
+#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
+ /* reserve memory for video display (always full pages) */
+ addr = video_setmem (addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_VIDEO */
+
+ /*
+ * reserve memory for U-Boot code, data & bss
+ * round down to next 4 kB limit
+ */
+ addr -= len;
+ addr &= ~(4096 - 1);
+#ifdef CONFIG_E500
+ /* round down to next 64 kB limit so that IVPR stays aligned */
+ addr &= ~(65536 - 1);
+#endif
+
+ debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+
+ /*
+ * reserve memory for malloc() arena
+ */
+ addr_sp = addr - TOTAL_MALLOC_LEN;
+ debug ("Reserving %dk for malloc() at: %08lx\n",
+ TOTAL_MALLOC_LEN >> 10, addr_sp);
+
+ /*
+ * (permanently) allocate a Board Info struct
+ * and a permanent copy of the "global" data
+ */
+ addr_sp -= sizeof (bd_t);
+ bd = (bd_t *) addr_sp;
+ gd->bd = bd;
+ debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+ sizeof (bd_t), addr_sp);
+ addr_sp -= sizeof (gd_t);
+ id = (gd_t *) addr_sp;
+ debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+ sizeof (gd_t), addr_sp);
+
+ /*
+ * Finally, we set up a new (bigger) stack.
+ *
+ * Leave some safety gap for SP, force alignment on 16 byte boundary
+ * Clear initial stack frame
+ */
+ addr_sp -= 16;
+ addr_sp &= ~0xF;
+ s = (ulong *)addr_sp;
+ *s-- = 0;
+ *s-- = 0;
+ addr_sp = (ulong)s;
+ debug ("Stack Pointer at: %08lx\n", addr_sp);
+
+ /*
+ * Save local variables to board info struct
+ */
+
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
+ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
+
+#ifdef CONFIG_IP860
+ bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
+ bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
+#elif defined CONFIG_MPC8220
+ bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
+ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
+#else
+ bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
+ bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
+#endif
+
+#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
+ defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+ bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
+#endif
+#if defined(CONFIG_MPC5xxx)
+ bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
+#endif
+#if defined(CONFIG_MPC83xx)
+ bd->bi_immrbar = CONFIG_SYS_IMMR;
+#endif
+#if defined(CONFIG_MPC8220)
+ bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
+ bd->bi_inpfreq = gd->inp_clk;
+ bd->bi_pcifreq = gd->pci_clk;
+ bd->bi_vcofreq = gd->vco_clk;
+ bd->bi_pevfreq = gd->pev_clk;
+ bd->bi_flbfreq = gd->flb_clk;
+
+ /* store bootparam to sram (backward compatible), here? */
+ {
+ u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
+ *sram++ = gd->ram_size;
+ *sram++ = gd->bus_clk;
+ *sram++ = gd->inp_clk;
+ *sram++ = gd->cpu_clk;
+ *sram++ = gd->vco_clk;
+ *sram++ = gd->flb_clk;
+ *sram++ = 0xb8c3ba11; /* boot signature */
+ }
+#endif
+
+ bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
+
+ WATCHDOG_RESET ();
+ bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
+ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
+#if defined(CONFIG_CPM2)
+ bd->bi_cpmfreq = gd->cpm_clk;
+ bd->bi_brgfreq = gd->brg_clk;
+ bd->bi_sccfreq = gd->scc_clk;
+ bd->bi_vco = gd->vco_out;
+#endif /* CONFIG_CPM2 */
+#if defined(CONFIG_MPC512X)
+ bd->bi_ipsfreq = gd->ips_clk;
+#endif /* CONFIG_MPC512X */
+#if defined(CONFIG_MPC5xxx)
+ bd->bi_ipbfreq = gd->ipb_clk;
+ bd->bi_pcifreq = gd->pci_clk;
+#endif /* CONFIG_MPC5xxx */
+ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
+
+#ifdef CONFIG_SYS_EXTBDINFO
+ strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
+ strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
+
+ bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
+ bd->bi_plb_busfreq = gd->bus_clk;
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ bd->bi_pci_busfreq = get_PCI_freq ();
+ bd->bi_opbfreq = get_OPB_freq ();
+#elif defined(CONFIG_XILINX_405)
+ bd->bi_pci_busfreq = get_PCI_freq ();
+#endif
+#endif
+
+ debug ("New Stack Pointer is: %08lx\n", addr_sp);
+
+ WATCHDOG_RESET ();
+
+#ifdef CONFIG_POST
+ post_bootmode_init();
+ post_run (NULL, POST_ROM | post_bootmode_get(0));
+#endif
+
+ WATCHDOG_RESET();
+
+ gd->relocaddr = addr; /* Record relocation address, useful for debug */
+
+ memcpy (id, (void *)gd, sizeof (gd_t));
+
+ relocate_code (addr_sp, id, addr);
+
+ /* NOTREACHED - relocate_code() does not return */
+}
+
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+ char *s;
+ bd_t *bd;
+ ulong malloc_start;
+
+#ifndef CONFIG_SYS_NO_FLASH
+ ulong flash_size;
+#endif
+
+ gd = id; /* initialize RAM version of global data */
+ bd = gd->bd;
+
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+
+ /* The Malloc area is immediately below the monitor copy in DRAM */
+ malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ /*
+ * The gd->cpu pointer is set to an address in flash before relocation.
+ * We need to update it to point to the same CPU entry in RAM.
+ */
+ gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
+
+ debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
+ WATCHDOG_RESET ();
+
+ /*
+ * Setup trap handlers
+ */
+ trap_init (dest_addr);
+
+#ifdef CONFIG_ADDR_MAP
+ init_addr_map();
+#endif
+
+#if defined(CONFIG_BOARD_EARLY_INIT_R)
+ board_early_init_r ();
+#endif
+
+ monitor_flash_len = (ulong)&__init_end - dest_addr;
+
+ WATCHDOG_RESET ();
+
+#ifdef CONFIG_LOGBUFFER
+ logbuff_init_ptrs ();
+#endif
+#ifdef CONFIG_POST
+ post_output_backlog ();
+#endif
+
+ WATCHDOG_RESET();
+
+#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
+ icache_enable (); /* it's time to enable the instruction cache */
+#endif
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+ unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
+#endif
+
+#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
+ /*
+ * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
+ * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
+ * bridge there.
+ */
+ pci_init ();
+#endif
+#if defined(CONFIG_BAB7xx)
+ /*
+ * Initialise the ISA bridge
+ */
+ initialise_w83c553f ();
+#endif
+
+ asm ("sync ; isync");
+
+ mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+ puts ("FLASH: ");
+
+ if ((flash_size = flash_init ()) > 0) {
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
+ print_size (flash_size, "");
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ s = getenv ("flashchecksum");
+ if (s && (*s == 'y')) {
+ printf (" CRC: %08X",
+ crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+ );
+ }
+ putc ('\n');
+# else /* !CONFIG_SYS_FLASH_CHECKSUM */
+ print_size (flash_size, "\n");
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
+ } else {
+ puts (failed);
+ hang ();
+ }
+
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
+ bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
+
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+ /* Make a update of the Memctrl. */
+ update_flash_size (flash_size);
+#endif
+
+
+# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
+ /* flash mapped at end of memory map */
+ bd->bi_flashoffset = TEXT_BASE + flash_size;
+# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
+# else
+ bd->bi_flashoffset = 0;
+# endif
+#else /* CONFIG_SYS_NO_FLASH */
+
+ bd->bi_flashsize = 0;
+ bd->bi_flashstart = 0;
+ bd->bi_flashoffset = 0;
+#endif /* !CONFIG_SYS_NO_FLASH */
+
+ WATCHDOG_RESET ();
+
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r ();
+
+ WATCHDOG_RESET ();
+
+#ifdef CONFIG_SPI
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
+ spi_init_f ();
+# endif
+ spi_init_r ();
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+ WATCHDOG_RESET ();
+ puts ("NAND: ");
+ nand_init(); /* go init the NAND */
+#endif
+
+ /* relocate environment function pointers etc. */
+ env_relocate ();
+
+ /*
+ * Fill in missing fields of bd_info.
+ * We do this here, where we have "normal" access to the
+ * environment; we used to do this still running from ROM,
+ * where had to use getenv_r(), which can be pretty slow when
+ * the environment is in EEPROM.
+ */
+
+#if defined(CONFIG_SYS_EXTBDINFO)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_I2CFAST)
+ /*
+ * set bi_iic_fast for linux taking environment variable
+ * "i2cfast" into account
+ */
+ {
+ char *s = getenv ("i2cfast");
+ if (s && ((*s == 'y') || (*s == 'Y'))) {
+ bd->bi_iic_fast[0] = 1;
+ bd->bi_iic_fast[1] = 1;
+ } else {
+ bd->bi_iic_fast[0] = 0;
+ bd->bi_iic_fast[1] = 0;
+ }
+ }
+#else
+ bd->bi_iic_fast[0] = 0;
+ bd->bi_iic_fast[1] = 0;
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CONFIG_SYS_EXTBDINFO */
+
+#if defined(CONFIG_SC3)
+ sc3_read_eeprom();
+#endif
+
+#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
+ mac_read_from_eeprom();
+#endif
+
+#ifdef CONFIG_HERMES
+ if ((gd->board_type >> 16) == 2)
+ bd->bi_ethspeed = gd->board_type & 0xFFFF;
+ else
+ bd->bi_ethspeed = 0xFFFF;
+#endif
+
+#ifdef CONFIG_CMD_NET
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
+#ifdef CONFIG_HAS_ETH1
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
+#endif
+#ifdef CONFIG_HAS_ETH2
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
+#endif
+#ifdef CONFIG_HAS_ETH3
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
+#endif
+#ifdef CONFIG_HAS_ETH4
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
+#endif
+#ifdef CONFIG_HAS_ETH5
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
+#endif
+#endif /* CONFIG_CMD_NET */
+
+ /* IP Address */
+ bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+
+ WATCHDOG_RESET ();
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
+ /*
+ * Do pci configuration
+ */
+ pci_init ();
+#endif
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+ /* Initialize stdio devices */
+ stdio_init ();
+
+ /* Initialize the jump table for applications */
+ jumptable_init ();
+
+#if defined(CONFIG_API)
+ /* Initialize API */
+ api_init ();
+#endif
+
+ /* Initialize the console (after the relocation and devices init) */
+ console_init_r ();
+
+#if defined(CONFIG_MISC_INIT_R)
+ /* miscellaneous platform dependent initialisations */
+ misc_init_r ();
+#endif
+
+#ifdef CONFIG_HERMES
+ if (bd->bi_ethspeed != 0xFFFF)
+ hermes_start_lxt980 ((int) bd->bi_ethspeed);
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+ WATCHDOG_RESET ();
+ puts ("KGDB: ");
+ kgdb_init ();
+#endif
+
+ debug ("U-Boot relocated to %08lx\n", dest_addr);
+
+ /*
+ * Enable Interrupts
+ */
+ interrupt_init ();
+
+ /* Must happen after interrupts are initialized since
+ * an irq handler gets installed
+ */
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+ serial_buffered_init();
+#endif
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
+ udelay (20);
+
+ set_timer (0);
+
+ /* Initialize from environment */
+ if ((s = getenv ("loadaddr")) != NULL) {
+ load_addr = simple_strtoul (s, NULL, 16);
+ }
+#if defined(CONFIG_CMD_NET)
+ if ((s = getenv ("bootfile")) != NULL) {
+ copy_filename (BootFile, s, sizeof (BootFile));
+ }
+#endif
+
+ WATCHDOG_RESET ();
+
+#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
+ dtt_init ();
+#endif
+#if defined(CONFIG_CMD_SCSI)
+ WATCHDOG_RESET ();
+ puts ("SCSI: ");
+ scsi_init ();
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+ WATCHDOG_RESET ();
+ puts ("MMC: ");
+ mmc_initialize (bd);
+#endif
+
+#if defined(CONFIG_CMD_DOC)
+ WATCHDOG_RESET ();
+ puts ("DOC: ");
+ doc_init ();
+#endif
+
+#ifdef CONFIG_BITBANGMII
+ bb_miiphy_init();
+#endif
+#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+ WATCHDOG_RESET ();
+ puts ("Net: ");
+#endif
+ eth_initialize (bd);
+#endif
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+ WATCHDOG_RESET ();
+ debug ("Reset Ethernet PHY\n");
+ reset_phy ();
+#endif
+
+#ifdef CONFIG_POST
+ post_run (NULL, POST_RAM | post_bootmode_get(0));
+#endif
+
+#if defined(CONFIG_CMD_PCMCIA) \
+ && !defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET ();
+ puts ("PCMCIA:");
+ pcmcia_init ();
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET ();
+# ifdef CONFIG_IDE_8xx_PCCARD
+ puts ("PCMCIA:");
+# else
+ puts ("IDE: ");
+#endif
+#if defined(CONFIG_START_IDE)
+ if (board_start_ide())
+ ide_init ();
+#else
+ ide_init ();
+#endif
+#endif
+
+#ifdef CONFIG_LAST_STAGE_INIT
+ WATCHDOG_RESET ();
+ /*
+ * Some parts can be only initialized if all others (like
+ * Interrupts) are up and running (i.e. the PC-style ISA
+ * keyboard).
+ */
+ last_stage_init ();
+#endif
+
+#if defined(CONFIG_CMD_BEDBUG)
+ WATCHDOG_RESET ();
+ bedbug_init ();
+#endif
+
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+ /*
+ * Export available size of memory for Linux,
+ * taking into account the protected RAM at top of memory
+ */
+ {
+ ulong pram;
+ uchar memsz[32];
+#ifdef CONFIG_PRAM
+ char *s;
+
+ if ((s = getenv ("pram")) != NULL) {
+ pram = simple_strtoul (s, NULL, 10);
+ } else {
+ pram = CONFIG_PRAM;
+ }
+#else
+ pram=0;
+#endif
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+ /* Also take the logbuffer into account (pram is in kB) */
+ pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+#endif
+#endif
+ sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+ setenv ("mem", (char *)memsz);
+ }
+#endif
+
+#ifdef CONFIG_PS2KBD
+ puts ("PS/2: ");
+ kbd_init();
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+ {
+ extern int do_mdm_init;
+ do_mdm_init = gd->do_mdm_init;
+ }
+#endif
+
+ /* Initialization complete - start the monitor */
+
+ /* main_loop() can return to retry autoboot, if so just run it again. */
+ for (;;) {
+ WATCHDOG_RESET ();
+ main_loop ();
+ }
+
+ /* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+ puts ("### ERROR ### Please RESET the board ###\n");
+ show_boot_progress(-30);
+ for (;;);
+}
+
+
+#if 0 /* We could use plain global data, but the resulting code is bigger */
+/*
+ * Pointer to initial global data area
+ *
+ * Here we initialize it.
+ */
+#undef XTRN_DECLARE_GLOBAL_DATA_PTR
+#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
+DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+#endif /* 0 */
+
+/************************************************************************/
--- /dev/null
+/*
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <image.h>
+#include <malloc.h>
+#include <u-boot/zlib.h>
+#include <bzlib.h>
+#include <environment.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <fdt.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#endif
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+#include <asm/cache.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern ulong get_effective_memsize(void);
+static ulong get_sp (void);
+static void set_clocks_in_mhz (bd_t *kbd);
+
+#ifndef CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE
+#define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE (768*1024*1024)
+#endif
+
+static void boot_jump_linux(bootm_headers_t *images)
+{
+ void (*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
+ ulong r7, ulong r8, ulong r9);
+#ifdef CONFIG_OF_LIBFDT
+ char *of_flat_tree = images->ft_addr;
+#endif
+
+ kernel = (void (*)(bd_t *, ulong, ulong, ulong,
+ ulong, ulong, ulong))images->ep;
+ debug ("## Transferring control to Linux (at address %08lx) ...\n",
+ (ulong)kernel);
+
+ show_boot_progress (15);
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+ unlock_ram_in_cache();
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+ if (of_flat_tree) { /* device tree; boot new style */
+ /*
+ * Linux Kernel Parameters (passing device tree):
+ * r3: pointer to the fdt
+ * r4: 0
+ * r5: 0
+ * r6: epapr magic
+ * r7: size of IMA in bytes
+ * r8: 0
+ * r9: 0
+ */
+#if defined(CONFIG_85xx) || defined(CONFIG_440)
+ #define EPAPR_MAGIC (0x45504150)
+#else
+ #define EPAPR_MAGIC (0x65504150)
+#endif
+
+ debug (" Booting using OF flat tree...\n");
+ WATCHDOG_RESET ();
+ (*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
+ CONFIG_SYS_BOOTMAPSZ, 0, 0);
+ /* does not return */
+ } else
+#endif
+ {
+ /*
+ * Linux Kernel Parameters (passing board info data):
+ * r3: ptr to board info data
+ * r4: initrd_start or 0 if no initrd
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ * r8: 0
+ * r9: 0
+ */
+ ulong cmd_start = images->cmdline_start;
+ ulong cmd_end = images->cmdline_end;
+ ulong initrd_start = images->initrd_start;
+ ulong initrd_end = images->initrd_end;
+ bd_t *kbd = images->kbd;
+
+ debug (" Booting using board info...\n");
+ WATCHDOG_RESET ();
+ (*kernel) (kbd, initrd_start, initrd_end,
+ cmd_start, cmd_end, 0, 0);
+ /* does not return */
+ }
+ return ;
+}
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+ phys_size_t bootm_size;
+ ulong size, sp, bootmap_base;
+
+ bootmap_base = getenv_bootm_low();
+ bootm_size = getenv_bootm_size();
+
+#ifdef DEBUG
+ if (((u64)bootmap_base + bootm_size) >
+ (CONFIG_SYS_SDRAM_BASE + (u64)gd->ram_size))
+ puts("WARNING: bootm_low + bootm_size exceed total memory\n");
+ if ((bootmap_base + bootm_size) > get_effective_memsize())
+ puts("WARNING: bootm_low + bootm_size exceed eff. memory\n");
+#endif
+
+ size = min(bootm_size, get_effective_memsize());
+ size = min(size, CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
+
+ if (size < bootm_size) {
+ ulong base = bootmap_base + size;
+ printf("WARNING: adjusting available memory to %lx\n", size);
+ lmb_reserve(lmb, base, bootm_size - size);
+ }
+
+ /*
+ * Booting a (Linux) kernel image
+ *
+ * Allocate space for command line and board info - the
+ * address should be as high as possible within the reach of
+ * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+ * memory, which means far enough below the current stack
+ * pointer.
+ */
+ sp = get_sp();
+ debug ("## Current stack ends at 0x%08lx\n", sp);
+
+ /* adjust sp by 1K to be safe */
+ sp -= 1024;
+ lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp));
+
+ return ;
+}
+
+static void boot_prep_linux(void)
+{
+#ifdef CONFIG_MP
+ /* if we are MP make sure to flush the dcache() to any changes are made
+ * visibile to all other cores */
+ flush_dcache();
+#endif
+ return ;
+}
+
+static int boot_cmdline_linux(bootm_headers_t *images)
+{
+ ulong bootmap_base = getenv_bootm_low();
+ ulong of_size = images->ft_len;
+ struct lmb *lmb = &images->lmb;
+ ulong *cmd_start = &images->cmdline_start;
+ ulong *cmd_end = &images->cmdline_end;
+
+ int ret = 0;
+
+ if (!of_size) {
+ /* allocate space and init command line */
+ ret = boot_get_cmdline (lmb, cmd_start, cmd_end, bootmap_base);
+ if (ret) {
+ puts("ERROR with allocation of cmdline\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int boot_bd_t_linux(bootm_headers_t *images)
+{
+ ulong bootmap_base = getenv_bootm_low();
+ ulong of_size = images->ft_len;
+ struct lmb *lmb = &images->lmb;
+ bd_t **kbd = &images->kbd;
+
+ int ret = 0;
+
+ if (!of_size) {
+ /* allocate space for kernel copy of board info */
+ ret = boot_get_kbd (lmb, kbd, bootmap_base);
+ if (ret) {
+ puts("ERROR with allocation of kernel bd\n");
+ return ret;
+ }
+ set_clocks_in_mhz(*kbd);
+ }
+
+ return ret;
+}
+
+static int boot_body_linux(bootm_headers_t *images)
+{
+ ulong rd_len;
+ struct lmb *lmb = &images->lmb;
+ ulong *initrd_start = &images->initrd_start;
+ ulong *initrd_end = &images->initrd_end;
+#if defined(CONFIG_OF_LIBFDT)
+ ulong bootmap_base = getenv_bootm_low();
+ ulong of_size = images->ft_len;
+ char **of_flat_tree = &images->ft_addr;
+#endif
+
+ int ret;
+
+ /* allocate space and init command line */
+ ret = boot_cmdline_linux(images);
+ if (ret)
+ return ret;
+
+ /* allocate space for kernel copy of board info */
+ ret = boot_bd_t_linux(images);
+ if (ret)
+ return ret;
+
+ rd_len = images->rd_end - images->rd_start;
+ ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
+ if (ret)
+ return ret;
+
+#if defined(CONFIG_OF_LIBFDT)
+ ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
+ if (ret)
+ return ret;
+
+ /*
+ * Add the chosen node if it doesn't exist, add the env and bd_t
+ * if the user wants it (the logic is in the subroutines).
+ */
+ if (of_size) {
+ if (fdt_chosen(*of_flat_tree, 1) < 0) {
+ puts ("ERROR: ");
+ puts ("/chosen node create failed");
+ puts (" - must RESET the board to recover.\n");
+ return -1;
+ }
+#ifdef CONFIG_OF_BOARD_SETUP
+ /* Call the board-specific fixup routine */
+ ft_board_setup(*of_flat_tree, gd->bd);
+#endif
+
+ /* Delete the old LMB reservation */
+ lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
+ (phys_size_t)fdt_totalsize(*of_flat_tree));
+
+ ret = fdt_resize(*of_flat_tree);
+ if (ret < 0)
+ return ret;
+ of_size = ret;
+
+ if (*initrd_start && *initrd_end)
+ of_size += FDT_RAMDISK_OVERHEAD;
+ /* Create a new LMB reservation */
+ lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
+
+ /* fixup the initrd now that we know where it should be */
+ if (*initrd_start && *initrd_end)
+ fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+ }
+#endif /* CONFIG_OF_LIBFDT */
+ return 0;
+}
+
+__attribute__((noinline))
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+ int ret;
+
+ if (flag & BOOTM_STATE_OS_CMDLINE) {
+ boot_cmdline_linux(images);
+ return 0;
+ }
+
+ if (flag & BOOTM_STATE_OS_BD_T) {
+ boot_bd_t_linux(images);
+ return 0;
+ }
+
+ if (flag & BOOTM_STATE_OS_PREP) {
+ boot_prep_linux();
+ return 0;
+ }
+
+ if (flag & BOOTM_STATE_OS_GO) {
+ boot_jump_linux(images);
+ return 0;
+ }
+
+ boot_prep_linux();
+ ret = boot_body_linux(images);
+ if (ret)
+ return ret;
+ boot_jump_linux(images);
+
+ return 0;
+}
+
+static ulong get_sp (void)
+{
+ ulong sp;
+
+ asm( "mr %0,1": "=r"(sp) : );
+ return sp;
+}
+
+static void set_clocks_in_mhz (bd_t *kbd)
+{
+ char *s;
+
+ if ((s = getenv ("clocks_in_mhz")) != NULL) {
+ /* convert all clock information to MHz */
+ kbd->bi_intfreq /= 1000000L;
+ kbd->bi_busfreq /= 1000000L;
+#if defined(CONFIG_MPC8220)
+ kbd->bi_inpfreq /= 1000000L;
+ kbd->bi_pcifreq /= 1000000L;
+ kbd->bi_pevfreq /= 1000000L;
+ kbd->bi_flbfreq /= 1000000L;
+ kbd->bi_vcofreq /= 1000000L;
+#endif
+#if defined(CONFIG_CPM2)
+ kbd->bi_cpmfreq /= 1000000L;
+ kbd->bi_brgfreq /= 1000000L;
+ kbd->bi_sccfreq /= 1000000L;
+ kbd->bi_vco /= 1000000L;
+#endif
+#if defined(CONFIG_MPC5xxx)
+ kbd->bi_ipbfreq /= 1000000L;
+ kbd->bi_pcifreq /= 1000000L;
+#endif /* CONFIG_MPC5xxx */
+ }
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/cache.h>
+#include <watchdog.h>
+
+void flush_cache(ulong start_addr, ulong size)
+{
+#ifndef CONFIG_5xx
+ ulong addr, start, end;
+
+ start = start_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+ end = start_addr + size - 1;
+
+ for (addr = start; (addr <= end) && (addr >= start);
+ addr += CONFIG_SYS_CACHELINE_SIZE) {
+ asm volatile("dcbst 0,%0" : : "r" (addr) : "memory");
+ WATCHDOG_RESET();
+ }
+ /* wait for all dcbst to complete on bus */
+ asm volatile("sync" : : : "memory");
+
+ for (addr = start; (addr <= end) && (addr >= start);
+ addr += CONFIG_SYS_CACHELINE_SIZE) {
+ asm volatile("icbi 0,%0" : : "r" (addr) : "memory");
+ WATCHDOG_RESET();
+ }
+ asm volatile("sync" : : : "memory");
+ /* flush prefetch queue */
+ asm volatile("isync" : : : "memory");
+#endif
+}
--- /dev/null
+/*
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+extern const struct exception_table_entry __start___ex_table[];
+extern const struct exception_table_entry __stop___ex_table[];
+
+static inline unsigned long
+search_one_table(const struct exception_table_entry *first,
+ const struct exception_table_entry *last,
+ unsigned long value)
+{
+ long diff;
+ while (first <= last) {
+ diff = first->insn - value;
+ if (diff == 0)
+ return first->fixup;
+ first++;
+ }
+
+ return 0;
+}
+
+int ex_tab_message = 1;
+
+unsigned long
+search_exception_table(unsigned long addr)
+{
+ unsigned long ret;
+
+ /* There is only the kernel to search. */
+ ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
+ /* if the serial port does not hang in exception, printf can be used */
+#if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION)
+ if (ex_tab_message)
+ debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+#endif
+ if (ret) return ret;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Gleb Natapov <gnatapov@mrv.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <watchdog.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+
+#ifdef CONFIG_SHOW_ACTIVITY
+void board_show_activity (ulong) __attribute__((weak, alias("__board_show_activity")));
+
+void __board_show_activity (ulong dummy)
+{
+ return;
+}
+#endif /* CONFIG_SHOW_ACTIVITY */
+
+#ifndef CONFIG_SYS_WATCHDOG_FREQ
+#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 2)
+#endif
+
+extern int interrupt_init_cpu (unsigned *);
+extern void timer_interrupt_cpu (struct pt_regs *);
+
+static unsigned decrementer_count; /* count value for 1e6/HZ microseconds */
+
+static __inline__ unsigned long get_msr (void)
+{
+ unsigned long msr;
+
+ asm volatile ("mfmsr %0":"=r" (msr):);
+
+ return msr;
+}
+
+static __inline__ void set_msr (unsigned long msr)
+{
+ asm volatile ("mtmsr %0"::"r" (msr));
+}
+
+static __inline__ unsigned long get_dec (void)
+{
+ unsigned long val;
+
+ asm volatile ("mfdec %0":"=r" (val):);
+
+ return val;
+}
+
+
+static __inline__ void set_dec (unsigned long val)
+{
+ if (val)
+ asm volatile ("mtdec %0"::"r" (val));
+}
+
+
+void enable_interrupts (void)
+{
+ set_msr (get_msr () | MSR_EE);
+}
+
+/* returns flag if MSR_EE was set before */
+int disable_interrupts (void)
+{
+ ulong msr = get_msr ();
+
+ set_msr (msr & ~MSR_EE);
+ return ((msr & MSR_EE) != 0);
+}
+
+int interrupt_init (void)
+{
+ int ret;
+
+ /* call cpu specific function from $(CPU)/interrupts.c */
+ ret = interrupt_init_cpu (&decrementer_count);
+
+ if (ret)
+ return ret;
+
+ set_dec (decrementer_count);
+
+ set_msr (get_msr () | MSR_EE);
+
+ return (0);
+}
+
+static volatile ulong timestamp = 0;
+
+void timer_interrupt (struct pt_regs *regs)
+{
+ /* call cpu specific function from $(CPU)/interrupts.c */
+ timer_interrupt_cpu (regs);
+
+ /* Restore Decrementer Count */
+ set_dec (decrementer_count);
+
+ timestamp++;
+
+#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
+ if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
+ WATCHDOG_RESET ();
+#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
+
+#ifdef CONFIG_STATUS_LED
+ status_led_tick (timestamp);
+#endif /* CONFIG_STATUS_LED */
+
+#ifdef CONFIG_SHOW_ACTIVITY
+ board_show_activity (timestamp);
+#endif /* CONFIG_SHOW_ACTIVITY */
+}
+
+void reset_timer (void)
+{
+ timestamp = 0;
+}
+
+ulong get_timer (ulong base)
+{
+ return (timestamp - base);
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
--- /dev/null
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/signal.h>
+#include <asm/processor.h>
+
+#define PC_REGNUM 64
+#define SP_REGNUM 1
+
+void breakinst(void);
+
+int
+kgdb_setjmp(long *buf)
+{
+ asm ("mflr 0; stw 0,0(%0);"
+ "stw 1,4(%0); stw 2,8(%0);"
+ "mfcr 0; stw 0,12(%0);"
+ "stmw 13,16(%0)"
+ : : "r" (buf));
+ /* XXX should save fp regs as well */
+ return 0;
+}
+
+void
+kgdb_longjmp(long *buf, int val)
+{
+ if (val == 0)
+ val = 1;
+ asm ("lmw 13,16(%0);"
+ "lwz 0,12(%0); mtcrf 0x38,0;"
+ "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
+ "mtlr 0; mr 3,%1"
+ : : "r" (buf), "r" (val));
+}
+
+static inline unsigned long
+get_msr(void)
+{
+ unsigned long msr;
+ asm volatile("mfmsr %0" : "=r" (msr):);
+ return msr;
+}
+
+static inline void
+set_msr(unsigned long msr)
+{
+ asm volatile("mtmsr %0" : : "r" (msr));
+}
+
+/* Convert the SPARC hardware trap type code to a unix signal number. */
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.
+ */
+static struct hard_trap_info
+{
+ unsigned int tt; /* Trap type code for powerpc */
+ unsigned char signo; /* Signal that we map this trap into */
+} hard_trap_info[] = {
+ { 0x200, SIGSEGV }, /* machine check */
+ { 0x300, SIGSEGV }, /* address error (store) */
+ { 0x400, SIGBUS }, /* instruction bus error */
+ { 0x500, SIGINT }, /* interrupt */
+ { 0x600, SIGBUS }, /* alingment */
+ { 0x700, SIGTRAP }, /* breakpoint trap */
+ { 0x800, SIGFPE }, /* fpu unavail */
+ { 0x900, SIGALRM }, /* decrementer */
+ { 0xa00, SIGILL }, /* reserved */
+ { 0xb00, SIGILL }, /* reserved */
+ { 0xc00, SIGCHLD }, /* syscall */
+ { 0xd00, SIGTRAP }, /* single-step/watch */
+ { 0xe00, SIGFPE }, /* fp assist */
+ { 0, 0} /* Must be last */
+};
+
+static int
+computeSignal(unsigned int tt)
+{
+ struct hard_trap_info *ht;
+
+ for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+ if (ht->tt == tt)
+ return ht->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+void
+kgdb_enter(struct pt_regs *regs, kgdb_data *kdp)
+{
+ unsigned long msr;
+
+ kdp->private[0] = msr = get_msr();
+ set_msr(msr & ~MSR_EE); /* disable interrupts */
+
+ if (regs->nip == (unsigned long)breakinst) {
+ /* Skip over breakpoint trap insn */
+ regs->nip += 4;
+ }
+ regs->msr &= ~MSR_SE;
+
+ /* reply to host that an exception has occurred */
+ kdp->sigval = computeSignal(regs->trap);
+
+ kdp->nregs = 2;
+
+ kdp->regs[0].num = PC_REGNUM;
+ kdp->regs[0].val = regs->nip;
+
+ kdp->regs[1].num = SP_REGNUM;
+ kdp->regs[1].val = regs->gpr[SP_REGNUM];
+}
+
+void
+kgdb_exit(struct pt_regs *regs, kgdb_data *kdp)
+{
+ unsigned long msr = kdp->private[0];
+
+ if (kdp->extype & KGDBEXIT_WITHADDR)
+ regs->nip = kdp->exaddr;
+
+ switch (kdp->extype & KGDBEXIT_TYPEMASK) {
+
+ case KGDBEXIT_KILL:
+ case KGDBEXIT_CONTINUE:
+ set_msr(msr);
+ break;
+
+ case KGDBEXIT_SINGLE:
+ regs->msr |= MSR_SE;
+#if 0
+ set_msr(msr | MSR_SE);
+#endif
+ break;
+ }
+}
+
+int
+kgdb_trap(struct pt_regs *regs)
+{
+ return (regs->trap);
+}
+
+/* return the value of the CPU registers.
+ * some of them are non-PowerPC names :(
+ * they are stored in gdb like:
+ * struct {
+ * u32 gpr[32];
+ * f64 fpr[32];
+ * u32 pc, ps, cnd, lr; (ps=msr)
+ * u32 cnt, xer, mq;
+ * }
+ */
+
+#define SPACE_REQUIRED ((32*4)+(32*8)+(6*4))
+
+#ifdef CONFIG_8260
+/* store floating double indexed */
+#define STFDI(n,p) __asm__ __volatile__ ("stfd " #n ",%0" : "=o"(p[2*n]))
+/* store floating double multiple */
+#define STFDM(p) { STFDI( 0,p); STFDI( 1,p); STFDI( 2,p); STFDI( 3,p); \
+ STFDI( 4,p); STFDI( 5,p); STFDI( 6,p); STFDI( 7,p); \
+ STFDI( 8,p); STFDI( 9,p); STFDI(10,p); STFDI(11,p); \
+ STFDI(12,p); STFDI(13,p); STFDI(14,p); STFDI(15,p); \
+ STFDI(16,p); STFDI(17,p); STFDI(18,p); STFDI(19,p); \
+ STFDI(20,p); STFDI(21,p); STFDI(22,p); STFDI(23,p); \
+ STFDI(24,p); STFDI(25,p); STFDI(26,p); STFDI(27,p); \
+ STFDI(28,p); STFDI(29,p); STFDI(30,p); STFDI(31,p); }
+#endif
+
+int
+kgdb_getregs(struct pt_regs *regs, char *buf, int max)
+{
+ int i;
+ unsigned long *ptr = (unsigned long *)buf;
+
+ if (max < SPACE_REQUIRED)
+ kgdb_error(KGDBERR_NOSPACE);
+
+ if ((unsigned long)ptr & 3)
+ kgdb_error(KGDBERR_ALIGNFAULT);
+
+ /* General Purpose Regs */
+ for (i = 0; i < 32; i++)
+ *ptr++ = regs->gpr[i];
+
+ /* Floating Point Regs */
+#ifdef CONFIG_8260
+ STFDM(ptr);
+ ptr += 32*2;
+#else
+ for (i = 0; i < 32; i++) {
+ *ptr++ = 0;
+ *ptr++ = 0;
+ }
+#endif
+
+ /* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+ *ptr++ = regs->nip;
+ *ptr++ = regs->msr;
+ *ptr++ = regs->ccr;
+ *ptr++ = regs->link;
+ *ptr++ = regs->ctr;
+ *ptr++ = regs->xer;
+
+ return (SPACE_REQUIRED);
+}
+
+/* set the value of the CPU registers */
+
+#ifdef CONFIG_8260
+/* load floating double */
+#define LFD(n,v) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"(v))
+/* load floating double indexed */
+#define LFDI(n,p) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"((p)[2*n]))
+/* load floating double multiple */
+#define LFDM(p) { LFDI( 0,p); LFDI( 1,p); LFDI( 2,p); LFDI( 3,p); \
+ LFDI( 4,p); LFDI( 5,p); LFDI( 6,p); LFDI( 7,p); \
+ LFDI( 8,p); LFDI( 9,p); LFDI(10,p); LFDI(11,p); \
+ LFDI(12,p); LFDI(13,p); LFDI(14,p); LFDI(15,p); \
+ LFDI(16,p); LFDI(17,p); LFDI(18,p); LFDI(19,p); \
+ LFDI(20,p); LFDI(21,p); LFDI(22,p); LFDI(23,p); \
+ LFDI(24,p); LFDI(25,p); LFDI(26,p); LFDI(27,p); \
+ LFDI(28,p); LFDI(29,p); LFDI(30,p); LFDI(31,p); }
+#endif
+
+void
+kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length)
+{
+ unsigned long *ptr = (unsigned long *)buf;
+
+ if (regno < 0 || regno >= 70)
+ kgdb_error(KGDBERR_BADPARAMS);
+ else if (regno >= 32 && regno < 64) {
+ if (length < 8)
+ kgdb_error(KGDBERR_NOSPACE);
+ }
+ else {
+ if (length < 4)
+ kgdb_error(KGDBERR_NOSPACE);
+ }
+
+ if ((unsigned long)ptr & 3)
+ kgdb_error(KGDBERR_ALIGNFAULT);
+
+ if (regno >= 0 && regno < 32)
+ regs->gpr[regno] = *ptr;
+ else switch (regno) {
+
+#ifdef CONFIG_8260
+#define caseF(n) \
+ case (n) + 32: LFD(n, *ptr); break;
+
+caseF( 0) caseF( 1) caseF( 2) caseF( 3) caseF( 4) caseF( 5) caseF( 6) caseF( 7)
+caseF( 8) caseF( 9) caseF(10) caseF(11) caseF(12) caseF(13) caseF(14) caseF(15)
+caseF(16) caseF(17) caseF(18) caseF(19) caseF(20) caseF(21) caseF(22) caseF(23)
+caseF(24) caseF(25) caseF(26) caseF(27) caseF(28) caseF(29) caseF(30) caseF(31)
+
+#undef caseF
+#endif
+
+ case 64: regs->nip = *ptr; break;
+ case 65: regs->msr = *ptr; break;
+ case 66: regs->ccr = *ptr; break;
+ case 67: regs->link = *ptr; break;
+ case 68: regs->ctr = *ptr; break;
+ case 69: regs->ctr = *ptr; break;
+
+ default:
+ kgdb_error(KGDBERR_BADPARAMS);
+ }
+}
+
+void
+kgdb_putregs(struct pt_regs *regs, char *buf, int length)
+{
+ int i;
+ unsigned long *ptr = (unsigned long *)buf;
+
+ if (length < SPACE_REQUIRED)
+ kgdb_error(KGDBERR_NOSPACE);
+
+ if ((unsigned long)ptr & 3)
+ kgdb_error(KGDBERR_ALIGNFAULT);
+
+ /*
+ * If the stack pointer has moved, you should pray.
+ * (cause only god can help you).
+ */
+
+ /* General Purpose Regs */
+ for (i = 0; i < 32; i++)
+ regs->gpr[i] = *ptr++;
+
+ /* Floating Point Regs */
+#ifdef CONFIG_8260
+ LFDM(ptr);
+#endif
+ ptr += 32*2;
+
+ /* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+ regs->nip = *ptr++;
+ regs->msr = *ptr++;
+ regs->ccr = *ptr++;
+ regs->link = *ptr++;
+ regs->ctr = *ptr++;
+ regs->xer = *ptr++;
+}
+
+/* This function will generate a breakpoint exception. It is used at the
+ beginning of a program to sync up with a debugger and can be used
+ otherwise as a quick means to stop program execution and "break" into
+ the debugger. */
+
+void
+kgdb_breakpoint(int argc, char *argv[])
+{
+ asm(" .globl breakinst\n\
+ breakinst: .long 0x7d821008\n\
+ ");
+}
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbf */
+/* Description: Data Cache block flush */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbf
+ppcDcbf:
+ dcbf r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbi */
+/* Description: Data Cache block Invalidate */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbi
+ppcDcbi:
+ dcbi r0,r3
+ blr
+
+/*--------------------------------------------------------------------------
+ * Function: ppcDcbz
+ * Description: Data Cache block zero.
+ * Input: r3 = effective address
+ * Output: none.
+ *-------------------------------------------------------------------------- */
+
+ .globl ppcDcbz
+ppcDcbz:
+ dcbz r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcSync */
+/* Description: Processor Synchronize */
+/* Input: none. */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcSync
+ppcSync:
+ sync
+ blr
--- /dev/null
+/*
+ * String handling functions for PowerPC.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <ppc_asm.tmpl>
+#include <asm/errno.h>
+
+ .globl strcpy
+strcpy:
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r5)
+ bne 1b
+ blr
+
+ .globl strncpy
+strncpy:
+ cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r6,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r6)
+ bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
+ blr
+
+ .globl strcat
+strcat:
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r5)
+ cmpwi 0,r0,0
+ bne 1b
+ addi r5,r5,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r5)
+ bne 1b
+ blr
+
+ .globl strcmp
+strcmp:
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r5)
+ cmpwi 1,r3,0
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ beqlr 1
+ beq 1b
+ blr
+
+ .globl strlen
+strlen:
+ addi r4,r3,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ bne 1b
+ subf r3,r3,r4
+ blr
+
+ .globl memset
+memset:
+ rlwimi r4,r4,8,16,23
+ rlwimi r4,r4,16,0,15
+ addi r6,r3,-4
+ cmplwi 0,r5,4
+ blt 7f
+ stwu r4,4(r6)
+ beqlr
+ andi. r0,r6,3
+ add r5,r0,r5
+ subf r6,r0,r6
+ rlwinm r0,r5,32-2,2,31
+ mtctr r0
+ bdz 6f
+1: stwu r4,4(r6)
+ bdnz 1b
+6: andi. r5,r5,3
+7: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r6,r6,3
+8: stbu r4,1(r6)
+ bdnz 8b
+ blr
+
+ .globl bcopy
+bcopy:
+ mr r6,r3
+ mr r3,r4
+ mr r4,r6
+ b memcpy
+
+ .globl memmove
+memmove:
+ cmplw 0,r3,r4
+ bgt backwards_memcpy
+ /* fall through */
+
+ .globl memcpy
+memcpy:
+ rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
+ addi r6,r3,-4
+ addi r4,r4,-4
+ beq 2f /* if less than 8 bytes to do */
+ andi. r0,r6,3 /* get dest word aligned */
+ mtctr r7
+ bne 5f
+1: lwz r7,4(r4)
+ lwzu r8,8(r4)
+ stw r7,4(r6)
+ stwu r8,8(r6)
+ bdnz 1b
+ andi. r5,r5,7
+2: cmplwi 0,r5,4
+ blt 3f
+ lwzu r0,4(r4)
+ addi r5,r5,-4
+ stwu r0,4(r6)
+3: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r4,r4,3
+ addi r6,r6,3
+4: lbzu r0,1(r4)
+ stbu r0,1(r6)
+ bdnz 4b
+ blr
+5: subfic r0,r0,4
+ mtctr r0
+6: lbz r7,4(r4)
+ addi r4,r4,1
+ stb r7,4(r6)
+ addi r6,r6,1
+ bdnz 6b
+ subf r5,r0,r5
+ rlwinm. r7,r5,32-3,3,31
+ beq 2b
+ mtctr r7
+ b 1b
+
+ .globl backwards_memcpy
+backwards_memcpy:
+ rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
+ add r6,r3,r5
+ add r4,r4,r5
+ beq 2f
+ andi. r0,r6,3
+ mtctr r7
+ bne 5f
+1: lwz r7,-4(r4)
+ lwzu r8,-8(r4)
+ stw r7,-4(r6)
+ stwu r8,-8(r6)
+ bdnz 1b
+ andi. r5,r5,7
+2: cmplwi 0,r5,4
+ blt 3f
+ lwzu r0,-4(r4)
+ subi r5,r5,4
+ stwu r0,-4(r6)
+3: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+4: lbzu r0,-1(r4)
+ stbu r0,-1(r6)
+ bdnz 4b
+ blr
+5: mtctr r0
+6: lbzu r7,-1(r4)
+ stbu r7,-1(r6)
+ bdnz 6b
+ subf r5,r0,r5
+ rlwinm. r7,r5,32-3,3,31
+ beq 2b
+ mtctr r7
+ b 1b
+
+ .globl memcmp
+memcmp:
+ cmpwi 0,r5,0
+ ble- 2f
+ mtctr r5
+ addi r6,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r6)
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ bdnzt 2,1b
+ blr
+2: li r3,0
+ blr
+
+ .global memchr
+memchr:
+ cmpwi 0,r5,0
+ ble- 2f
+ mtctr r5
+ addi r3,r3,-1
+1: lbzu r0,1(r3)
+ cmpw 0,r0,r4
+ bdnzf 2,1b
+ beqlr
+2: li r3,0
+ blr
--- /dev/null
+/*
+ * Copyright (C) 2009 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+
+ .file "reloc.S"
+
+ .text
+#ifndef CONFIG_NAND_SPL
+ /*
+ * Function: relocate entries for one exception vector
+ */
+ .globl trap_reloc
+ .type trap_reloc, @function
+trap_reloc:
+ lwz r0, 0(r7) /* hdlr ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 0(r7)
+
+ lwz r0, 4(r7) /* int_return ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 4(r7)
+
+ lwz r0, 8(r7) /* transfer_to_handler ...*/
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 8(r7)
+
+ blr
+ .size trap_reloc, .-trap_reloc
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000, 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
+ * base on code by
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <config.h>
+#include <watchdog.h>
+
+/*
+ * unsigned long long get_ticks(void);
+ *
+ * read timebase as "long long"
+ */
+ .globl get_ticks
+get_ticks:
+1: mftbu r3
+ mftb r4
+ mftbu r5
+ cmp 0,r3,r5
+ bne 1b
+ blr
+
+/*
+ * Delay for a number of ticks
+ */
+ .globl wait_ticks
+wait_ticks:
+ mflr r8 /* save link register */
+ mr r7, r3 /* save tick count */
+ bl get_ticks /* Get start time */
+
+ /* Calculate end time */
+ addc r7, r4, r7 /* Compute end time lower */
+ addze r6, r3 /* and end time upper */
+
+ WATCHDOG_RESET /* Trigger watchdog, if needed */
+1: bl get_ticks /* Get current time */
+ subfc r4, r4, r7 /* Subtract current time from end time */
+ subfe. r3, r3, r6
+ bge 1b /* Loop until time expired */
+
+ mtlr r8 /* restore link register */
+ blr
--- /dev/null
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+ ulong ticks;
+
+ if (usec < 1000) {
+ ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+ } else {
+ ticks = ((usec / 10) * (get_tbclk() / 100000));
+ }
+
+ return (ticks);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * We implement the delay by converting the delay (the number of
+ * microseconds to wait) into a number of time base ticks; then we
+ * watch the time base until it has incremented by that amount.
+ */
+void __udelay(unsigned long usec)
+{
+ ulong ticks = usec2ticks (usec);
+ wait_ticks (ticks);
+}
+
+/* ------------------------------------------------------------------------- */
+#ifndef CONFIG_NAND_SPL
+unsigned long ticks2usec(unsigned long ticks)
+{
+ ulong tbclk = get_tbclk();
+
+ /* usec = ticks * 1000000 / tbclk
+ * Multiplication would overflow at ~4.2e3 ticks,
+ * so we break it up into
+ * usec = ( ( ticks * 1000) / tbclk ) * 1000;
+ */
+ ticks *= 1000L;
+ ticks /= tbclk;
+ ticks *= 1000L;
+
+ return ((ulong)ticks);
+}
+#endif
+/* ------------------------------------------------------------------------- */
+
+int init_timebase (void)
+{
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ /* unlock */
+ immap->im_sitk.sitk_tbk = KAPWR_KEY;
+#endif
+
+ /* reset */
+ asm ("li 3,0 ; mttbu 3 ; mttbl 3 ;");
+
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
+ /* enable */
+ immap->im_sit.sit_tbscr |= TBSCR_TBE;
+#endif
+ return (0);
+}
+/* ------------------------------------------------------------------------- */
+++ /dev/null
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= ppc_8xx-
-
-STANDALONE_LOAD_ADDR = 0x40000
-
-PLATFORM_RELFLAGS += -mrelocatable
-PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
-PLATFORM_LDFLAGS += -n
-
-#
-# When cross-compiling on NetBSD, we have to define __PPC__ or else we
-# will pick up a va_list declaration that is incompatible with the
-# actual argument lists emitted by the compiler.
-#
-# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
-
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = cache.o kgdb.o io.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#include <config.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CACHE_LINE_SIZE
-# define CACHE_LINE_SIZE L1_CACHE_BYTES
-#endif
-
-#if CACHE_LINE_SIZE == 128
-#define LG_CACHE_LINE_SIZE 7
-#elif CACHE_LINE_SIZE == 32
-#define LG_CACHE_LINE_SIZE 5
-#elif CACHE_LINE_SIZE == 16
-#define LG_CACHE_LINE_SIZE 4
-#elif CACHE_LINE_SIZE == 8
-#define LG_CACHE_LINE_SIZE 3
-#else
-# error "Invalid cache line size!"
-#endif
-
-/*
- * Invalidate L1 instruction cache.
- */
-_GLOBAL(invalidate_l1_instruction_cache)
- mfspr r3,PVR
- rlwinm r3,r3,16,16,31
- cmpi 0,r3,1
- beqlr /* for 601, do nothing */
- /* 603/604 processor - use invalidate-all bit in HID0 */
- mfspr r3,HID0
- ori r3,r3,HID0_ICFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Invalidate L1 data cache.
- */
-_GLOBAL(invalidate_l1_data_cache)
- mfspr r3,HID0
- ori r3,r3,HID0_DCFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Flush data cache.
- */
-_GLOBAL(flush_dcache)
- lis r3,0
- lis r5,CACHE_LINE_SIZE
-flush:
- cmp 0,1,r3,r5
- bge done
- lwz r5,0(r3)
- lis r5,CACHE_LINE_SIZE
- addi r3,r3,0x4
- b flush
-done:
- blr
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5 /* align r3 down to cache line */
- subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
- add r4,r4,r5 /* r4 += cache_line_size-1 */
- srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
- beqlr /* if r4 == 0 return */
- mtctr r4 /* ctr = r4 */
-
- sync
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbf 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbf's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_page_to_ram(void *page)
- */
-_GLOBAL(__flush_page_to_ram)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Flush a particular page from the instruction cache.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_icache_page(void *page)
- */
-_GLOBAL(__flush_icache_page)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
-1: icbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Clear a page using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- */
-_GLOBAL(clear_page)
- li r0,4096/CACHE_LINE_SIZE
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- blr
-
-/*
- * Enable L1 Instruction cache
- */
-_GLOBAL(icache_enable)
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Disable L1 Instruction cache
- */
-_GLOBAL(icache_disable)
- mflr r4
- bl invalidate_l1_instruction_cache /* uses r3 */
- sync
- mtlr r4
- mfspr r3, HID0
- li r5, 0
- ori r5, r5, HID0_ICE
- andc r3, r3, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Is instruction cache enabled?
- */
-_GLOBAL(icache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_ICE
- blr
-
-
-_GLOBAL(l1dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
-/*
- * Enable data cache(s) - L1 and optionally L2
- * Calls l2cache_enable. LR saved in r5
- */
-_GLOBAL(dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- mflr r5
- bl l2cache_enable /* uses r3 and r4 */
- sync
- mtlr r5
-#endif
- blr
-
-
-/*
- * Disable data cache(s) - L1 and optionally L2
- * Calls flush_dcache and l2cache_disable_no_flush.
- * LR saved in r4
- */
-_GLOBAL(dcache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- li r5, HID0_DCE|HID0_DCFI
- andc r3, r3, r5 /* no enable, no invalidate */
- mtspr HID0, r3
- sync
-#ifdef CONFIG_SYS_L2
- bl l2cache_disable_no_flush /* uses r3 */
-#endif
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Is data cache enabled?
- */
-_GLOBAL(dcache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_DCE
- blr
-
-/*
- * Invalidate L2 cache using L2I and polling L2IP or L2I
- */
-_GLOBAL(l2cache_invalidate)
- sync
- mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- sync
- mtspr l2cr, r3
- sync
- mfspr r3, PVR
- sync
- rlwinm r3, r3, 16,16,31
- cmpli 0,r3,0x8000 /* 7451, 7441 */
- beq 0,inv_7450
- cmpli 0,r3,0x8001 /* 7455, 7445 */
- beq 0,inv_7450
- cmpli 0,r3,0x8002 /* 7457, 7447 */
- beq 0,inv_7450
- cmpli 0,r3,0x8003 /* 7447A */
- beq 0,inv_7450
- cmpli 0,r3,0x8004 /* 7448 */
- beq 0,inv_7450
-invl2:
- mfspr r3, l2cr
- andi. r3, r3, L2CR_L2IP
- bne invl2
- /* turn off the global invalidate bit */
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 11, 9
- sync
- mtspr l2cr, r3
- sync
- blr
-inv_7450:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne inv_7450
- blr
-
-/*
- * Enable L2 cache
- * Calls l2cache_invalidate. LR is saved in r4
- */
-_GLOBAL(l2cache_enable)
- mflr r4 /* save link register */
- bl l2cache_invalidate /* uses r3 */
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Disable L2 cache
- * Calls flush_dcache. LR is saved in r4
- */
-_GLOBAL(l2cache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mtlr r4 /* restore link register */
-l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- isync
- blr
+++ /dev/null
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -mstring
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- *
- * more modifications by
- * Josh Huber <huber@mclx.com>
- * added support for the 74xx series of cpus
- * added support for the 7xx series of cpus
- * made the code a little less hard-coded, and more auto-detectish
- */
-
-#include <common.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#include "../board/MAI/AmigaOneG3SE/memio.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-cpu_t
-get_cpu_type(void)
-{
- uint pvr = get_pvr();
- cpu_t type;
-
- type = CPU_UNKNOWN;
-
- switch (PVR_VER(pvr)) {
- case 0x000c:
- type = CPU_7400;
- break;
- case 0x0008:
- type = CPU_750;
-
- if (((pvr >> 8) & 0xff) == 0x01) {
- type = CPU_750CX; /* old CX (80100 and 8010x?)*/
- } else if (((pvr >> 8) & 0xff) == 0x22) {
- type = CPU_750CX; /* CX (82201,82202) and CXe (82214) */
- } else if (((pvr >> 8) & 0xff) == 0x33) {
- type = CPU_750CX; /* CXe (83311) */
- } else if (((pvr >> 12) & 0xF) == 0x3) {
- type = CPU_755;
- }
- break;
-
- case 0x7000:
- type = CPU_750FX;
- break;
-
- case 0x7002:
- type = CPU_750GX;
- break;
-
- case 0x800C:
- type = CPU_7410;
- break;
-
- case 0x8000:
- type = CPU_7450;
- break;
-
- case 0x8001:
- type = CPU_7455;
- break;
-
- case 0x8002:
- type = CPU_7457;
- break;
-
- case 0x8003:
- type = CPU_7447A;
- break;
-
- case 0x8004:
- type = CPU_7448;
- break;
-
- default:
- break;
- }
-
- return type;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if !defined(CONFIG_BAB7xx)
-int checkcpu (void)
-{
- uint type = get_cpu_type();
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
- char *str;
-
- puts ("CPU: ");
-
- switch (type) {
- case CPU_750CX:
- printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"",
- (pvr>>8) & 0xf,
- pvr & 0xf);
- goto PR_CLK;
-
- case CPU_750:
- str = "750";
- break;
-
- case CPU_750FX:
- str = "750FX";
- break;
-
- case CPU_750GX:
- str = "750GX";
- break;
-
- case CPU_755:
- str = "755";
- break;
-
- case CPU_7400:
- str = "MPC7400";
- break;
-
- case CPU_7410:
- str = "MPC7410";
- break;
-
- case CPU_7447A:
- str = "MPC7447A";
- break;
-
- case CPU_7448:
- str = "MPC7448";
- break;
-
- case CPU_7450:
- str = "MPC7450";
- break;
-
- case CPU_7455:
- str = "MPC7455";
- break;
-
- case CPU_7457:
- str = "MPC7457";
- break;
-
- default:
- printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
- return -1;
- }
-
- printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF);
-PR_CLK:
- printf (" @ %s MHz\n", strmhz(buf, clock));
-
- return (0);
-}
-#endif
-/* these two functions are unimplemented currently [josh] */
-
-/* -------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int
-checkicache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int
-checkdcache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline void
-soft_restart(unsigned long addr)
-{
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-
- __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
- __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
- __asm__ __volatile__ ("mtspr 27, 4");
- __asm__ __volatile__ ("rfi");
-
- while(1); /* not reached */
-}
-
-
-#if !defined(CONFIG_PCIPPC2) && \
- !defined(CONFIG_BAB7xx) && \
- !defined(CONFIG_ELPPC) && \
- !defined(CONFIG_PPMC7XX)
-/* no generic way to do board reset. simply call soft_reset. */
-void
-do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong addr;
- /* flush and disable I/D cache */
- __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
- __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
- __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
- __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 4");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 5");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
-
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on your
- * system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- soft_restart(addr);
- while(1); /* not reached */
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
- */
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
-unsigned long get_tbclk(void)
-{
- return (gd->bus_clk / 4);
-}
-#else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
-
-unsigned long get_tbclk (void)
-{
- return CONFIG_SYS_BUS_HZ / 4;
-}
-#endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_WATCHDOG)
-#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
-void
-watchdog_reset(void)
-{
-
-}
-#endif /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_OF_LIBFDT
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- fdt_fixup_ethernet(blob);
-}
-#endif
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu_init.c - low level cpu init
- *
- * there's really nothing going on here yet. future work area?
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-
-/*
- * Breath some life into the CPU...
- *
- * there's basically nothing to do here since the memory controller
- * isn't on the CPU in this case.
- */
-void
-cpu_init_f (void)
-{
- switch (get_cpu_type()) {
- case CPU_7450:
- case CPU_7455:
- case CPU_7457:
- case CPU_7447A:
- case CPU_7448:
- /* enable the timebase bit in HID0 */
- set_hid0(get_hid0() | 0x4000000);
- break;
- default:
- /* do nothing */
- break;
- }
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-#include <command.h>
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
-#if defined(DEBUG) && !defined(CONFIG_AMIGAONEG3SE)
- printf("interrupt_init: GT main cause reg: %08x:%08x\n",
- GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
- puts("interrupt_init: setting decrementer_count\n");
-#endif
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void
-external_interrupt(struct pt_regs *regs)
-{
- puts("external_interrupt (oops!)\n");
-}
-
-volatile ulong timestamp = 0;
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void
-timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-
-}
-
-void
-irq_free_handler(int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- puts("IRQ related functions are unimplemented currently.\n");
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
+++ /dev/null
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3,0
- addis r4,r0,0x0040
-kgdb_flush_loop:
- lwz r5,0(r3)
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- cmp 0,0,r3,r4
- bne kgdb_flush_loop
- SYNC
- mfspr r3,1008
- ori r3,r3,0x8800
- mtspr 1008,r3
- sync
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern unsigned long get_board_bus_clk (void);
-
-static const int hid1_multipliers_x_10[] = {
- 25, /* 0000 - 2.5x */
- 75, /* 0001 - 7.5x */
- 70, /* 0010 - 7x */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 65, /* 0101 - 6.5x */
- 100, /* 0110 - 10x */
- 45, /* 0111 - 4.5x */
- 30, /* 1000 - 3x */
- 55, /* 1001 - 5.5x */
- 40, /* 1010 - 4x */
- 50, /* 1011 - 5x */
- 80, /* 1100 - 8x */
- 60, /* 1101 - 6x */
- 35, /* 1110 - 3.5x */
- 0 /* 1111 - off */
-};
-
-/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
-static const int hid1_74xx_multipliers_x_10[] = {
- 115, /* 00000 - 11.5x */
- 170, /* 00001 - 17x */
- 75, /* 00010 - 7.5x */
- 150, /* 00011 - 15x */
- 70, /* 00100 - 7x */
- 180, /* 00101 - 18x */
- 10, /* 00110 - bypass */
- 200, /* 00111 - 20x */
- 20, /* 01000 - 2x */
- 210, /* 01001 - 21x */
- 65, /* 01010 - 6.5x */
- 130, /* 01011 - 13x */
- 85, /* 01100 - 8.5x */
- 240, /* 01101 - 24x */
- 95, /* 01110 - 9.5x */
- 90, /* 01111 - 9x */
- 30, /* 10000 - 3x */
- 105, /* 10001 - 10.5x */
- 55, /* 10010 - 5.5x */
- 110, /* 10011 - 11x */
- 40, /* 10100 - 4x */
- 100, /* 10101 - 10x */
- 50, /* 10110 - 5x */
- 120, /* 10111 - 12x */
- 80, /* 11000 - 8x */
- 140, /* 11001 - 14x */
- 60, /* 11010 - 6x */
- 160, /* 11011 - 16x */
- 135, /* 11100 - 13.5x */
- 280, /* 11101 - 28x */
- 0, /* 11110 - off */
- 125 /* 11111 - 12.5x */
-};
-
-static const int hid1_fx_multipliers_x_10[] = {
- 00, /* 0000 - off */
- 00, /* 0001 - off */
- 10, /* 0010 - bypass */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 25, /* 0101 - 2.5x */
- 30, /* 0110 - 3x */
- 35, /* 0111 - 3.5x */
- 40, /* 1000 - 4x */
- 45, /* 1001 - 4.5x */
- 50, /* 1010 - 5x */
- 55, /* 1011 - 5.5x */
- 60, /* 1100 - 6x */
- 65, /* 1101 - 6.5x */
- 70, /* 1110 - 7x */
- 75, /* 1111 - 7.5 */
- 80, /* 10000 - 8x */
- 85, /* 10001 - 8.5x */
- 90, /* 10010 - 9x */
- 95, /* 10011 - 9.5x */
- 100, /* 10100 - 10x */
- 110, /* 10101 - 11x */
- 120, /* 10110 - 12x */
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2)
- *
- * (Approx. GCLK frequency in Hz)
- */
-
-int get_clocks (void)
-{
- ulong clock = 0;
-
-#ifdef CONFIG_SYS_BUS_CLK
- gd->bus_clk = CONFIG_SYS_BUS_CLK; /* bus clock is a fixed frequency */
-#else
- gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
-#endif
-
- /* calculate the clock frequency based upon the CPU type */
- switch (get_cpu_type()) {
- case CPU_7447A:
- case CPU_7448:
- case CPU_7455:
- case CPU_7457:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
- break;
-
- case CPU_750GX:
- case CPU_750FX:
- clock = (gd->bus_clk / 10) *
- hid1_fx_multipliers_x_10[get_hid1 () >> 27];
- break;
-
- case CPU_7450:
- case CPU_740:
- case CPU_740P:
- case CPU_745:
- case CPU_750CX:
- case CPU_750:
- case CPU_750P:
- case CPU_755:
- case CPU_7400:
- case CPU_7410:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_multipliers_x_10[get_hid1 () >> 28];
- break;
-
- case CPU_UNKNOWN:
- printf ("get_gclk_freq(): unknown CPU type\n");
- clock = 0;
- return (1);
- }
-
- gd->cpu_clk = clock;
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2001 Josh Huber <huber@mclx.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfff00100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- */
-#include <config.h>
-#include <74xx_7xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if !defined(CONFIG_DB64360) && \
- !defined(CONFIG_DB64460) && \
- !defined(CONFIG_CPCI750) && \
- !defined(CONFIG_P3Mx)
-#include <galileo/gt64260R.h>
-#endif
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
-
- /* the boot code is located below the exception table */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /*
- * On the MPC8xx, this is a software emulation interrupt. It
- * occurs for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x2000
-
-boot_cold:
-boot_warm:
- /* disable everything */
- li r0, 0
- mtspr HID0, r0
- sync
- mtmsr 0
- bl invalidate_bats
- sync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#endif
-#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx)
- .long 0x7e00066c
- /*
- * dssall instruction, gas doesn't have it yet
- * ...for altivec, data stream stop all this probably
- * isn't needed unless we warm (software) reboot U-Boot
- */
-#endif
-
-#ifdef CONFIG_SYS_L2
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-#ifdef CONFIG_SYS_BOARD_ASM_INIT
- /* do early init */
- bl board_asm_init
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*------------------------------------------------------*/
-
- /* perform low-level init */
- /* sdram init, galileo init, etc */
- /* r3: NHR bit from HID0 */
-
- /* setup the bats */
- bl setup_bats
- sync
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * This means:
- * 1) for the EVB, original gt regs need to be mapped
- * 2) need to have an IBAT for the 0xf region,
- * we are running there!
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- * The init-mem BAT can be reused after reloc. The old
- * gt-regs BAT can be reused after board_init_f calls
- * board_early_init_f (EVB only).
- */
-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
- /* enable address translation */
- bl enable_addr_trans
- sync
-
- /* enable and invalidate the data cache */
- bl l1dcache_enable
- sync
-#endif
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- /* run low-level CPU init code (from Flash) */
- bl cpu_init_f
- sync
-
- mr r3, r21
-
- /* r3: BOOTFLAG */
- /* run 1st part of board init code (from Flash) */
- bl board_init_f
- sync
-
- /* NOTREACHED */
-
- .globl invalidate_bats
-invalidate_bats:
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-#endif
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-#endif
- isync
- sync
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- addis r3, r0, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- /* DBAT 0 */
- addis r4, r0, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- addis r3, r0, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- /* IBAT 1 */
- addis r4, r0, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- addis r3, r0, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- /* DBAT 1 */
- addis r4, r0, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- addis r3, r0, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- /* IBAT 2 */
- addis r4, r0, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- addis r3, r0, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- /* DBAT 2 */
- addis r4, r0, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- addis r3, r0, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- /* IBAT 3 */
- addis r4, r0, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- addis r3, r0, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- addis r4, r0, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- addis r3, r0, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CONFIG_SYS_IBAT4L@h
- ori r4, r4, CONFIG_SYS_IBAT4L@l
- addis r3, r0, CONFIG_SYS_IBAT4U@h
- ori r3, r3, CONFIG_SYS_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
- isync
-
- /* DBAT 4 */
- addis r4, r0, CONFIG_SYS_DBAT4L@h
- ori r4, r4, CONFIG_SYS_DBAT4L@l
- addis r3, r0, CONFIG_SYS_DBAT4U@h
- ori r3, r3, CONFIG_SYS_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
- isync
-
- /* IBAT 5 */
- addis r4, r0, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- addis r3, r0, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- addis r4, r0, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- addis r3, r0, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- addis r4, r0, CONFIG_SYS_IBAT6L@h
- ori r4, r4, CONFIG_SYS_IBAT6L@l
- addis r3, r0, CONFIG_SYS_IBAT6U@h
- ori r3, r3, CONFIG_SYS_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- addis r4, r0, CONFIG_SYS_DBAT6L@h
- ori r4, r4, CONFIG_SYS_DBAT6L@l
- addis r3, r0, CONFIG_SYS_DBAT6U@h
- ori r3, r3, CONFIG_SYS_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
- /* IBAT 7 */
- addis r4, r0, CONFIG_SYS_IBAT7L@h
- ori r4, r4, CONFIG_SYS_IBAT7L@l
- addis r3, r0, CONFIG_SYS_IBAT7U@h
- ori r3, r3, CONFIG_SYS_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- addis r4, r0, CONFIG_SYS_DBAT7L@h
- ori r4, r4, CONFIG_SYS_DBAT7L@l
- addis r3, r0, CONFIG_SYS_DBAT7U@h
- ori r3, r3, CONFIG_SYS_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
-
- /* bats are done, now invalidate the TLBs */
-
- addis r3, 0, 0x0000
- addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */
-
- isync
-
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt tlblp
-
- blr
-
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
- .globl dc_read
-dc_read:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*-----------------------------------------------------------------------*/
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-#ifdef CONFIG_ECC
- bl board_relocate_rom
- sync
- mr r3, r10 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-#else
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-#endif
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-#ifdef CONFIG_ECC
- bl board_init_ecc
-#endif
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-/* clear_bss: */
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r10 /* Destination Address */
-#if defined(CONFIG_AMIGAONEG3SE) || \
- defined(CONFIG_DB64360) || \
- defined(CONFIG_DB64460) || \
- defined(CONFIG_CPCI750) || \
- defined(CONFIG_PPMC7XX) || \
- defined(CONFIG_P3Mx)
- mr r4, r9 /* Use RAM copy of the global data */
-#endif
- bl after_reloc
-
- /* not reached - end relocate_code */
-/*-----------------------------------------------------------------------*/
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- /* enable execptions from RAM vectors */
- mfmsr r7
- li r8,MSR_IP
- andc r7,r7,r8
- mtmsr r7
-
- mtlr r4 /* restore link register */
- blr
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, 0x1000
- sync
- mtspr HID0, r0
- sync
- blr
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-
- /* Unlock the data cache and invalidate it */
- mfspr r0, HID0
- li r3,0x1000
- andc r0,r0,r3
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_AMIGAONEG3SE
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#ifdef CONFIG_AMIGAONEG3SE
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-#else
-#define END_OF_MEM 0x02000000
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void
-show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
- " %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP:"
- " %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
- int i, j;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
-
- p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0);
- p -= 32;
- for (i = 0; i < 256; i+=16) {
- printf("%08x: ", (unsigned int)p+i);
- for (j = 0; j < 16; j++) {
- printf("%02x ", p[i+j]);
- }
- printf("\n");
- }
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-#
-# (C) Copyright 2007-2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-$(shell mkdir -p $(OBJTREE)/board/freescale/common)
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS-y := cpu.o
-COBJS-y += traps.o
-COBJS-y += cpu_init.o
-COBJS-y += fixed_sdram.o
-COBJS-y += i2c.o
-COBJS-y += interrupts.o
-COBJS-y += iopin.o
-COBJS-y += serial.o
-COBJS-y += speed.o
-COBJS-${CONFIG_FSL_DIU_FB} += diu.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../../../../board/freescale/common/fsl_diu_fb.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../../../../board/freescale/common/fsl_logo_bmp.o
-COBJS-${CONFIG_CMD_IDE} += ide.o
-COBJS-${CONFIG_IIM} += iim.o
-COBJS-$(CONFIG_PCI) += pci.o
-
-COBJS := $(COBJS-y)
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * needed for arch/ppc/cpu/mpc512x/start.S
- *
- * These should be auto-generated
- */
-#define LPCS0AW 0x0024
-#define SRAMBAR 0x00C4
-#define SWCRR 0x0904
-#define LPC_OFFSET 0x10000
-#define CS0_CONFIG 0x00000
-#define CS_CTRL 0x00020
-#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */
-
-#define EXC_OFF_SYS_RESET 0x0100
-#define _START_OFFSET EXC_OFF_SYS_RESET
+++ /dev/null
-#
-# (C) Copyright 2007-2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
- -ffixed-r2 -msoft-float -mcpu=603e
-
-# Use default linker script.
-# A board port can override this setting in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc512x/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2007-2010 DENX Software Engineering
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC512x family.
- *
- * Derived from the MPC83xx code.
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- ulong clock = gd->cpu_clk;
- u32 pvr = get_pvr ();
- u32 spridr = in_be32(&immr->sysconf.spridr);
- char buf1[32], buf2[32];
-
- puts ("CPU: ");
-
- switch (spridr & 0xffff0000) {
- case SPR_5121E:
- puts ("MPC5121e ");
- break;
- default:
- printf ("Unknown part ID %08x ", spridr & 0xffff0000);
- }
- printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr));
-
- switch (pvr & 0xffff0000) {
- case PVR_E300C4:
- puts ("e300c4 ");
- break;
- default:
- puts ("unknown ");
- }
- printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n",
- strmhz(buf1, clock),
- strmhz(buf2, gd->csb_clk),
- gd->reset_status & 0xffff);
- return 0;
-}
-
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~( MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Enable Reset Control Reg - "RSTE" is the magic word that let us go
- */
- out_be32(&immap->reset.rpr, 0x52535445);
-
- /* Verify Reset Control Reg is enabled */
- while (!(in_be32(&immap->reset.rcer) & RCER_CRE))
- ;
-
- printf ("Resetting the board.\n");
- udelay(200);
-
- /* Perform reset */
- out_be32(&immap->reset.rcr, RCR_SWHR);
-
- /* Unreached... */
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return tbclk;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- /* Reset watchdog */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- out_be32(&immr->wdt.swsrr, 0x556c);
- out_be32(&immr->wdt.swsrr, 0xaa39);
-
- if (re_enable)
- enable_interrupts ();
-}
-#endif
-
-#ifdef CONFIG_OF_LIBFDT
-
-#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
-/*
- * fdt setup for old device trees
- * fix up
- * cpu clocks
- * soc clocks
- * ethernet addresses
- */
-static void old_ft_cpu_setup(void *blob, bd_t *bd)
-{
- /*
- * avoid fixing up by path because that
- * produces scary error messages
- */
- uchar enetaddr[6];
-
- /*
- * old device trees have ethernet nodes with
- * device_type = "network"
- */
- eth_getenv_enetaddr("ethaddr", enetaddr);
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "local-mac-address", enetaddr, 6, 0);
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "address", enetaddr, 6, 0);
- /*
- * old device trees have soc nodes with
- * device_type = "soc"
- */
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_ipsfreq, 0);
-}
-#endif
-
-static void ft_clock_setup(void *blob, bd_t *bd)
-{
- char *cpu_path = "/cpus/" OF_CPU;
-
- /*
- * fixup cpu clocks using path
- */
- do_fixup_by_path_u32(blob, cpu_path,
- "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "clock-frequency", bd->bi_intfreq, 1);
- /*
- * fixup soc clocks using compatible
- */
- do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
- "bus-frequency", bd->bi_ipsfreq, 1);
-}
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- old_ft_cpu_setup(blob, bd);
-#endif
- ft_clock_setup(blob, bd);
-#ifdef CONFIG_HAS_ETH0
- fdt_fixup_ethernet(blob);
-#endif
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif
-
-#ifdef CONFIG_MPC512x_FEC
-/* Default initializations for FEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(bd_t *bis)
- */
-
-int cpu_eth_init(bd_t *bis)
-{
- return mpc512x_fec_initialize(bis);
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * Copyright (C) 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- *
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Set up the memory map, initialize registers,
- */
-void cpu_init_f (volatile immap_t * im)
-{
- u32 ips_div;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- out_be32(&im->arbiter.acr,
- (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT)
- );
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- out_be32(im->arbiter.acr,
- (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT)
- );
-#endif
-
- /* RSR - Reset Status Register - clear all status */
- gd->reset_status = im->reset.rsr;
- out_be32(&im->reset.rsr, ~RSR_RES);
-
- /*
- * RMR - Reset Mode Register - enable checkstop reset
- */
- out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT));
-
- /* Set IPS-CSB divider: IPS = 1/2 CSB */
- ips_div = in_be32(&im->clk.scfr[0]);
- ips_div &= ~(SCFR1_IPS_DIV_MASK);
- ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT;
- out_be32(&im->clk.scfr[0], ips_div);
-
- /*
- * Enable Time Base/Decrementer
- *
- * NOTICE: TB needs to be enabled as early as possible in order to
- * have udelay() working; if not enabled, usually leads to a hang, like
- * during FLASH chip identification etc.
- */
- setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
-}
-
-int cpu_init_r (void)
-{
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- * York Sun <yorksun@freescale.com>
- *
- * FSL DIU Framebuffer driver
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#include "../../../../board/freescale/common/fsl_diu_fb.h"
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-#include <stdio_dev.h>
-#include <video_fb.h>
-#endif
-
-#ifdef CONFIG_FSL_DIU_LOGO_BMP
-extern unsigned int FSL_Logo_BMP[];
-#else
-#define FSL_Logo_BMP NULL
-#endif
-
-static int xres, yres;
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile clk512x_t *clk = &immap->clk;
- volatile unsigned int *clkdvdr = &clk->scfr[0];
- unsigned long speed_ccb, temp, pixval;
-
- speed_ccb = get_bus_freq(0) * 4;
- temp = 1000000000/pixclock;
- temp *= 1000;
- pixval = speed_ccb / temp;
- debug("DIU pixval = %lu\n", pixval);
-
- /* Modify PXCLK in GUTS CLKDVDR */
- debug("DIU: Current value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
- temp = in_be32(clkdvdr) & 0xFFFFFF00;
- out_be32(clkdvdr, temp | (pixval & 0xFF));
- debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
-}
-
-char *valid_bmp(char *addr)
-{
- unsigned long h_addr;
-
- h_addr = simple_strtoul(addr, NULL, 16);
- if (h_addr < CONFIG_SYS_FLASH_BASE ||
- h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
- printf("bmp addr %lx is not a valid flash address\n", h_addr);
- return 0;
- } else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
- printf("bmp addr is not a bmp\n");
- return 0;
- } else
- return (char *)h_addr;
-}
-
-int mpc5121_diu_init(void)
-{
- unsigned int pixel_format;
- char *bmp = NULL;
- char *bmp_env;
-
- xres = 1024;
- yres = 768;
- pixel_format = 0x88883316;
-
- debug("mpc5121_diu_init\n");
- bmp_env = getenv("diu_bmp_addr");
- if (bmp_env) {
- bmp = valid_bmp(bmp_env);
- }
- if (!bmp)
- bmp = (char *)FSL_Logo_BMP;
- return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
-}
-
-int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
- int flag, int argc, char *argv[])
-{
- unsigned int addr;
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if (!strncmp(argv[1], "init", 4)) {
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
- fsl_diu_clear_screen();
- drv_video_init();
-#else
- return mpc5121_diu_init();
-#endif
- } else {
- addr = simple_strtoul(argv[1], NULL, 16);
- fsl_diu_clear_screen();
- fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- diufb, CONFIG_SYS_MAXARGS, 1, mpc5121diu_init_show_bmp,
- "Init or Display BMP file",
- "init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'"
- );
-
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-
-/*
- * The Graphic Device
- */
-GraphicDevice ctfb;
-void *video_hw_init(void)
-{
- GraphicDevice *pGD = (GraphicDevice *) &ctfb;
- struct fb_info *info;
-
- if (mpc5121_diu_init() < 0)
- return NULL;
-
- /* fill in Graphic device struct */
- sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
- xres, yres, 32, 64, 60);
-
- pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
- pGD->winSizeX = xres;
- pGD->winSizeY = yres - info->logo_height;
- pGD->plnSizeX = pGD->winSizeX;
- pGD->plnSizeY = pGD->winSizeY;
-
- pGD->gdfBytesPP = 4;
- pGD->gdfIndex = GDF_32BIT_X888RGB;
-
- pGD->isaBase = 0;
- pGD->pciBase = 0;
- pGD->memSize = info->screen_size - info->logo_size;
-
- /* Cursor Start Address */
- pGD->dprBase = 0;
- pGD->vprBase = 0;
- pGD->cprBase = 0;
-
- return (void *)pGD;
-}
-
-/**
- * Set the LUT
- *
- * @index: color number
- * @r: red
- * @b: blue
- * @g: green
- */
-void video_set_lut
- (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
-{
- return;
-}
-
-#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
+++ /dev/null
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/mpc512x.h>
-
-/*
- * MDDRC Config Runtime Settings
- */
-ddr512x_config_t default_mddrc_config = {
- .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG,
- .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
- .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1,
- .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2,
-};
-
-u32 default_init_seq[] = {
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_EM2,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_EM2,
- CONFIG_SYS_DDRCMD_EM3,
- CONFIG_SYS_DDRCMD_EN_DLL,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_OCD_DEFAULT,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP
-};
-
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram(ddr512x_config_t *mddrc_config,
- u32 *dram_init_seq, int seq_sz)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2(msize);
- u32 i;
-
- /* take default settings and init sequence if necessary */
- if (mddrc_config == NULL)
- mddrc_config = &default_mddrc_config;
- if (dram_init_seq == NULL) {
- dram_init_seq = default_init_seq;
- seq_sz = sizeof(default_init_seq)/sizeof(u32);
- }
-
- /* Initialize IO Control */
- out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
- /* Initialize DDR Local Window */
- out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
- out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
- sync_law(&im->sysconf.ddrlaw.ar);
-
- /* DDR Enable */
- out_be32(&im->mddrc.ddr_sys_config, MDDRC_SYS_CFG_EN);
-
- /* Initialize DDR Priority Manager */
- out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
- out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
- out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
- out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
- out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
- out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
- out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
- out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
- out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
- out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
- out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
- out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
- out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
- out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
- out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
- out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
- out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
- out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
- out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
- out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
- out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
- out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
- out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
- /*
- * Initialize MDDRC
- * put MDDRC in CMD mode and
- * set the max time between refreshes to 0 during init process
- */
- out_be32(&im->mddrc.ddr_sys_config,
- mddrc_config->ddr_sys_config | MDDRC_SYS_CFG_CMD_MASK);
- out_be32(&im->mddrc.ddr_time_config0,
- mddrc_config->ddr_time_config0 & MDDRC_REFRESH_ZERO_MASK);
- out_be32(&im->mddrc.ddr_time_config1,
- mddrc_config->ddr_time_config1);
- out_be32(&im->mddrc.ddr_time_config2,
- mddrc_config->ddr_time_config2);
-
- /* Initialize DDR with either default or supplied init sequence */
- for (i = 0; i < seq_sz; i++)
- out_be32(&im->mddrc.ddr_command, dram_init_seq[i]);
-
- /* Start MDDRC */
- out_be32(&im->mddrc.ddr_time_config0, mddrc_config->ddr_time_config0);
- out_be32(&im->mddrc.ddr_sys_config, mddrc_config->ddr_sys_config);
-
- return msize;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003 - 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC5xxx code.
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <i2c.h>
-
-/* by default set I2C bus 0 active */
-static unsigned int bus_num __attribute__ ((section (".data"))) = 0;
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 3
-
-struct mpc512x_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in(volatile u32 *reg);
-static void mpc_reg_out(volatile u32 *reg, int val, int mask);
-static int wait_for_bb(void);
-static int wait_for_pin(int *status);
-static int do_address(uchar chip, char rdwr_flag);
-static int send_bytes(uchar chip, char *buf, int len);
-static int receive_bytes(uchar chip, char *buf, int len);
-static int mpc_get_fdr(int);
-
-static int mpc_reg_in (volatile u32 *reg)
-{
- int ret = in_be32(reg) >> 24;
-
- return ret;
-}
-
-static void mpc_reg_out (volatile u32 *reg, int val, int mask)
-{
- if (!mask) {
- out_be32(reg, val << 24);
- } else {
- clrsetbits_be32(reg, mask << 24, (val & mask) << 24);
- }
-}
-
-static int wait_for_bb (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in (®s->msr);
-
- while (timeout-- && (status & I2C_BB)) {
- volatile int temp;
- mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
- temp = mpc_reg_in (®s->mdr);
- mpc_reg_out (®s->mcr, 0, I2C_STA);
- mpc_reg_out (®s->mcr, 0, 0);
- mpc_reg_out (®s->mcr, I2C_EN, 0);
-
- udelay (1000);
- status = mpc_reg_in (®s->msr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in (®s->msr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay (1000);
- *status = mpc_reg_in (®s->msr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out (®s->msr, 0, I2C_IF);
-
- return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag) {
- chip |= 1;
- }
-
- mpc_reg_out (®s->mcr, I2C_TX, I2C_TX);
- mpc_reg_out (®s->mdr, chip, 0);
-
- if (wait_for_pin (&status)) {
- return -2;
- }
-
- if (status & I2C_RXAK) {
- return -3;
- }
-
- return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out (®s->mdr, buf[wrcount], 0);
-
- if (wait_for_pin (&status)) {
- break;
- }
-
- if (status & I2C_RXAK) {
- break;
- }
-
- }
-
- return !(wrcount == len);
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out (®s->mcr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in (®s->mdr);
-
- if (dummy) {
- dummy = 0;
- } else {
- rdcount++;
- }
-
- if (wait_for_pin (&status)) {
- return -4;
- }
- }
-
- mpc_reg_out (®s->mcr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in (®s->mdr);
-
- if (wait_for_pin (&status)) {
- return -5;
- }
-
- mpc_reg_out (®s->mcr, 0, I2C_TXAK);
-
- return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- int i;
-
- for (i = 0; i < I2C_BUS_CNT; i++){
- volatile i2c512x_dev_t *regs = &im->i2c.dev[i];
-
- mpc_reg_out (®s->mcr, 0, 0);
-
- /* Set clock */
- mpc_reg_out (®s->mfdr, mpc_get_fdr (speed), 0);
- mpc_reg_out (®s->madr, saddr << 1, 0);
-
- /* Enable module */
- mpc_reg_out (®s->mcr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out (®s->msr, 0, I2C_IF);
- }
-
- /* Disable interrupts */
- out_be32(&im->i2c.icr, 0);
-
- /* Turn off filters */
- out_be32(&im->i2c.mifr, 0);
-}
-
-static int mpc_get_fdr (int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ips, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
- struct mpc512x_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ips = gd->ips_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] - 1) * scltap[j].tap2tap
- + 2);
- if (ips <= speed*scl) {
- if ((speed*scl - ips) < bestmatch) {
- bestmatch = speed*scl - ips;
- best_i = i;
- best_j = j;
- best_speed = ips/scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- debug("%ld kHz, \n", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
-
- if (! do_address (chip, 0)) {
- mpc_reg_out (®s->mcr, 0, I2C_STA);
- udelay (500);
- break;
- }
-
- mpc_reg_out (®s->mcr, 0, I2C_STA);
- udelay (500);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- char xaddr[4];
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, &xaddr[4-alen], alen)) {
- printf ("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out (®s->mcr, I2C_RSTA, I2C_RSTA);
- if (do_address (chip, 1)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes (chip, (char *)buf, len)) {
- printf ("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out (®s->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- char xaddr[4];
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->mcr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, &xaddr[4-alen], alen)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)buf, len)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out (®s->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_set_bus_num (unsigned int bus)
-{
- if (bus >= I2C_BUS_CNT) {
- return -1;
- }
- bus_num = bus;
-
- return 0;
-}
-
-unsigned int i2c_get_bus_num (void)
-{
- return bus_num;
-}
-
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_IDE_RESET)
-
-void ide_set_reset (int idereset)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- debug ("ide_set_reset(%d)\n", idereset);
-
- if (idereset) {
- out_be32(&im->pata.pata_ata_control, 0);
- } else {
- out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B);
- }
- udelay(100);
-}
-
-void init_ide_reset (void)
-{
- debug ("init_ide_reset\n");
-
- /*
- * Clear the reset bit to reset the interface
- * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
- */
- ide_set_reset(1);
-
- /* Assert the reset bit to enable the interface */
- ide_set_reset(0);
-
-}
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-int ide_preinit (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- long t;
- const struct {
- short t0;
- short t1;
- short t2_8;
- short t2_16;
- short t2i;
- short t4;
- short t9;
- short tA;
- } pio_specs = {
- .t0 = 600,
- .t1 = 70,
- .t2_8 = 290,
- .t2_16 = 165,
- .t2i = 0,
- .t4 = 30,
- .t9 = 20,
- .tA = 50,
- };
- union {
- u32 config;
- struct {
- u8 field1;
- u8 field2;
- u8 field3;
- u8 field4;
- }bytes;
- } cfg;
-
- debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
- (u32)&im->pata);
-
- /* Set the reset bit to 1 to enable the interface */
- ide_set_reset(0);
-
- /* Init timings : we use PIO mode 0 timings */
- t = 1000000000 / gd->ips_clk; /* period in ns */
- cfg.bytes.field1 = 3;
- cfg.bytes.field2 = 3;
- cfg.bytes.field3 = (pio_specs.t1 + t) / t;
- cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
-
- out_be32(&im->pata.pata_time1, cfg.config);
-
- cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
- cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
- cfg.bytes.field3 = 1;
- cfg.bytes.field4 = (pio_specs.t4 + t) / t;
-
- out_be32(&im->pata.pata_time2, cfg.config);
-
- cfg.config = in_be32(&im->pata.pata_time3);
- cfg.bytes.field1 = (pio_specs.t9 + t) / t;
-
- out_be32(&im->pata.pata_time3, cfg.config);
-
- debug ("PATA preinit complete.\n");
-
- return 0;
-}
-
-#endif /* defined(CONFIG_IDE_RESET) */
+++ /dev/null
-/*
- * Copyright 2008 Silicon Turnkey Express, Inc.
- * Martha Marx <mmarx@silicontkx.com>
- *
- * ADS5121 IIM (Fusebox) Interface
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_CMD_FUSE
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char cur_bank = '1';
-
-char *iim_err_msg(u32 err)
-{
- static char *IIM_errs[] = {
- "Parity Error in cache",
- "Explicit Sense Cycle Error",
- "Write to Locked Register Error",
- "Read Protect Error",
- "Override Protect Error",
- "Write Protect Error"};
-
- int i;
-
- if (!err)
- return "";
- for (i = 1; i < 8; i++)
- if (err & (1 << i))
- printf("IIM - %s\n", IIM_errs[i-1]);
- return "";
-}
-
-int in_range(int n, int min, int max, char *err, char *usg)
-{
- if (n > max || n < min) {
- printf(err);
- printf("Usage:\n%s\n", usg);
- return 0;
- }
- return 1;
-}
-
-int ads5121_fuse_read(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb, dummy;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- dummy = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("\tRead protect fuse is set\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- return 0;
- }
- printf("Reading Bank %d cache\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, num--, f++) {
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)(iim_fb[f]));
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (ctr % 4 != 0)
- printf("\n");
-}
-
-int ads5121_fuse_override(int bank, int f, u8 val)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb;
- u32 iim_stat;
- int i;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- iim_stat = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("Read protect fuse is set on bank %d;"
- "Override protect may also be set\n", bank);
- printf("An attempt will be made to override\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- }
- if (iim_stat & IIM_FBAC_FBOP) {
- printf("Override protect fuse is set on bank %d\n", bank);
- return 1;
- }
- if (f > IIM_FMAX) /* reset the entire bank */
- for (i = 0; i < IIM_FMAX + 1; i++)
- out_be32(&iim_fb[i], 0);
- else
- out_be32(&iim_fb[f], val);
- return 0;
-}
-
-int ads5121_fuse_prog(cmd_tbl_t *cmdtp, int bank, char *fuseno_bitno)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- int f, i, bitno;
- u32 stat, err;
-
- f = simple_strtol(fuseno_bitno, NULL, 10);
- if (f == 0 && fuseno_bitno[0] != '0')
- f = -1;
- if (!in_range(f, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- bitno = -1;
- for (i = 0; i < 6; i++) {
- if (fuseno_bitno[i] == '_') {
- bitno = simple_strtol(&(fuseno_bitno[i+1]), NULL, 10);
- if (bitno == 0 && fuseno_bitno[i+1] != '0')
- bitno = -1;
- break;
- }
- }
- if (!in_range(bitno, 0, 7, "Bit number ranges from 0-7\n"
- "Example of <frow_bitno>: \"18_4\" sets bit 4 of row 18\n",
- cmdtp->usage))
- return 1;
- out_be32(&iim->err, in_be32(&iim->err));
- out_be32(&iim->prg_p, IIM_PRG_P_SET);
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, bitno));
-#ifdef DEBUG
- printf("Programming disabled with DEBUG defined \n");
- printf(""Set up to pro
- printf("iim.ua = %x; iim.la = %x\n", iim->ua, iim->la);
-#else
- out_be32(&iim->fctl, IIM_FCTL_PROG_PULSE | IIM_FCTL_PROG);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- out_be32(&iim->prg_p, 0);
- err = in_be32(&iim->err);
- if (stat & IIM_STAT_PRGD) {
- if (!(err & (IIM_ERR_WPE | IIM_ERR_WPE))) {
- printf("Fuse is successfully set");
- if (err)
- printf(" - however there are other errors");
- printf("\n");
- }
- iim->stat = 0;
- }
- if (err) {
- iim_err_msg(err);
- out_be32(&iim->err, in_be32(&iim->err));
- }
-#endif
-}
-
-int ads5121_fuse_sense(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 stat, err, err_hold = 0;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- if (iim_fbac & IIM_FBAC_FBESP) {
- printf("\tSense Protect disallows this operation\n");
- out_be32(&iim->err, IIM_FBAC_FBESP);
- return 1;
- }
- err = in_be32(&iim->err);
- if (err) {
- iim_err_msg(err);
- err_hold |= err;
- }
- if (err & IIM_ERR_RPE)
- printf("\tRead protect fuse is set; "
- "Sense Protect may be set but will be attempted\n");
- if (err)
- out_be32(&iim->err, err);
- printf("Sensing fuse(s) on Bank %d\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, f++, num--) {
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, 0));
- out_be32(&iim->fctl, IIM_FCTL_ESNS_N);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- err = in_be32(&iim->err);
- if (err & IIM_ERR_SNSE) {
- iim_err_msg(err);
- out_be32(&iim->err, IIM_ERR_SNSE);
- return 1;
- }
- if (stat & IIM_STAT_SNSD) {
- out_be32(&iim->stat, 0);
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)iim->sdat);
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (err) {
- err_hold |= err;
- out_be32(&iim->err, err);
- }
- }
- if (ctr % 4 != 0)
- printf("\n");
- if (err_hold)
- iim_err_msg(err_hold);
-
- return 0;
-}
-
-int ads5121_fuse_stat(int bank)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 err;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- err = in_be32(&iim->err);
- if (err)
- iim_err_msg(err);
- if (err & IIM_ERR_RPE || iim_fbac & IIM_FBAC_FBRP) {
- if (iim_fbac == 0)
- printf("Since protection settings can't be read - "
- "try sensing fuse row 0;\n");
- return 0;
- }
- if (iim_fbac & IIM_PROTECTION)
- printf("Protection Fuses Bank %d = %#04x:\n", bank, iim_fbac);
- else if (!(err & IIM_ERR_RPE))
- printf("No Protection fuses are set\n");
- if (iim_fbac & IIM_FBAC_FBWP)
- printf("\tWrite Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBOP)
- printf("\tOverride Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBESP)
- printf("\tSense Protect Fuse is set\n");
- out_be32(&iim->err, in_be32(&iim->err));
-
- return 0;
-}
-
-int do_ads5121_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int frow, n, v, bank;
-
- if (cur_bank == '0')
- bank = 0;
- else
- bank = 1;
-
- switch (argc) {
- case 0:
- case 1:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 2:
- if (strncmp(argv[1], "stat", 4) == 0)
- return ads5121_fuse_stat(bank);
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, IIM_FMAX + 1, 0);
- if (strncmp(argv[1], "bank", 4) == 0) {
- printf("Active Fuse Bank is %c\n", cur_bank);
- return 0;
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 3:
- if (strncmp(argv[1], "bank", 4) == 0) {
- if (argv[2][0] == '0')
- cur_bank = '0';
- else if (argv[2][0] == '1')
- cur_bank = '1';
- else {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- printf("Setting Active Fuse Bank to %c\n", cur_bank);
- return 0;
- }
- if (strncmp(argv[1], "prog", 4) == 0)
- return ads5121_fuse_prog(cmdtp, bank, argv[2]);
-
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, frow, 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, frow, 0);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, frow, 1);
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 4:
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_read(bank, frow, n);
- }
- if (strncmp(argv[1], "ovride", 6) == 0) {
- v = (int)simple_strtol(argv[3], NULL, 10);
- return ads5121_fuse_override(bank, frow, v);
- }
- if (strncmp(argv[1], "sense", 5) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_sense(bank, frow, n);
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- default: /* at least 5 args */
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-}
-
-U_BOOT_CMD(
- fuse, CONFIG_SYS_MAXARGS, 0, do_ads5121_fuse,
- " - Read, Sense, Override or Program Fuses\n",
- "bank <n> - sets active Fuse Bank to 0 or 1\n"
- " no args shows current active bank\n"
- "fuse stat - print active fuse bank's protection status\n"
- "fuse read [<frow> [<n>]] - print <n> fuse rows starting at <frow>\n"
- " no args to print entire bank's fuses\n"
- "fuse ovride [<frow> [<v>]]- override fuses at <frow> with <v>\n"
- " no <v> defaults to 0 for the row\n"
- " no args resets entire bank to 0\n"
- " NOTE - settings persist until hard reset\n"
- "fuse sense [<frow>] - senses current fuse at <frow>\n"
- " no args for entire bank\n"
- "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n"
- " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n"
- " WARNING - this is permanent"
-);
-#endif /* CONFIG_CMD_FUSE */
+++ /dev/null
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- return 0;
-}
-
-/*
- * Install and free an interrupt handler.
- */
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
-}
-
-void irq_free_handler (int irq)
-{
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-void iopin_initialize(iopin_t *ioregs_init, int len)
-{
- short i, j, p;
- u32 *reg;
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- reg = (u32 *)&(im->io_ctrl);
-
- if (sizeof(ioregs_init) == 0)
- return;
-
- for (i = 0; i < len; i++) {
- for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
- p < ioregs_init[i].nr_pins; p++, j++) {
- if (ioregs_init[i].bit_or)
- setbits_be32(reg + j, ioregs_init[i].val);
- else
- out_be32 (reg + j, ioregs_init[i].val);
- }
- }
- return;
-}
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 DENX Software Engineering <wd@denx.de>
- * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/global_data.h>
-#include <pci.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-
-static struct pci_controller pci_hose;
-
-
-/**************************************************************************
- * pci_init_board()
- *
- */
-void
-pci_init_board(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile law512x_t *pci_law;
- volatile pot512x_t *pci_pot;
- volatile pcictrl512x_t *pci_ctrl;
- volatile pciconf512x_t *pci_conf;
- u16 reg16;
- u32 reg32;
- u32 dev;
- int i;
- struct pci_controller *hose;
-
- /* Set PCI divider for 33MHz */
- reg32 = in_be32(&im->clk.scfr[0]);
- reg32 &= ~(SCFR1_PCI_DIV_MASK);
- reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
- out_be32(&im->clk.scfr[0], reg32);
-
- clrsetbits_be32(&im->clk.scfr[0],
- SCFR1_PCI_DIV_MASK,
- SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT
- );
-
- pci_law = im->sysconf.pcilaw;
- pci_pot = im->ios.pot;
- pci_ctrl = &im->pci_ctrl;
- pci_conf = &im->pci_conf;
-
- hose = &pci_hose;
-
- /*
- * Release PCI RST Output signal
- */
- out_be32(&pci_ctrl->gcr, 0);
- udelay(2000);
- out_be32(&pci_ctrl->gcr, 1);
-
- /* We need to wait at least a 1sec based on PCI specs */
- for (i = 0; i < 1000; i++)
- udelay(1000);
-
- /*
- * Configure PCI Local Access Windows
- */
- out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M);
-
- out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M);
-
- /*
- * Configure PCI Outbound Translation Windows
- */
-
- /* PCI mem space - prefetch */
- out_be32(&pci_pot[0].potar,
- (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[0].pobar,
- (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[0].pocmr,
- POCMR_EN | POCMR_PRE | POCMR_CM_256M);
-
- /* PCI IO space */
- out_be32(&pci_pot[1].potar,
- (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[1].pobar,
- (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[1].pocmr,
- POCMR_EN | POCMR_IO | POCMR_CM_16M);
-
- /* PCI mmio - non-prefetch mem space */
- out_be32(&pci_pot[2].potar,
- (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[2].pobar,
- (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[2].pocmr,
- POCMR_EN | POCMR_CM_256M);
-
- /*
- * Configure PCI Inbound Translation Windows
- */
-
- /* we need RAM mapped to PCI space for the devices to
- * access main memory */
- out_be32(&pci_ctrl[0].pitar1, 0x0);
- out_be32(&pci_ctrl[0].pibar1, 0x0);
- out_be32(&pci_ctrl[0].piebar1, 0x0);
- out_be32(&pci_ctrl[0].piwar1,
- PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
- PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1));
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI_MEM_BASE,
- CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE,
- PCI_REGION_MEM|PCI_REGION_PREFETCH);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI_MMIO_BASE,
- CONFIG_SYS_PCI_MMIO_PHYS,
- CONFIG_SYS_PCI_MMIO_SIZE,
- PCI_REGION_MEM);
-
- /* PCI IO space */
- pci_set_region(hose->regions + 2,
- CONFIG_SYS_PCI_IO_BASE,
- CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* System memory space */
- pci_set_region(hose->regions + 3,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 4;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR + 0x8300),
- (CONFIG_SYS_IMMR + 0x8304));
-
- pci_register_hose(hose);
-
- /*
- * Write to Command register
- */
- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int tmp[2];
- const char *path;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
- path = fdt_getprop(blob, nodeoffset, "pci", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose.first_busno);
- tmp[1] = cpu_to_be32(pci_hose.last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
- }
-}
-#endif /* CONFIG_OF_LIBFDT */
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based ont the MPC5200 PSC driver.
- * Adapted for MPC512x by Jan Wrobel <wrr@semihalf.com>
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PSC_CONSOLE)
-
-static void fifo_init (volatile psc512x_t *psc)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-
- /* reset Rx & Tx fifo slice */
- out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE);
- out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE);
-
- /* disable Tx & Rx FIFO interrupts */
- out_be32(&psc->rfintmask, 0);
- out_be32(&psc->tfintmask, 0);
-
- out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16));
- out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16));
-
- /* enable Tx & Rx FIFO slice */
- out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE);
- out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE);
-
- out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE);
- __asm__ volatile ("sync");
-}
-
-void serial_setbrg(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
- unsigned long baseclk, div;
-
- /* calculate dividor for setting PSC CTUR and CTLR registers */
- baseclk = (gd->ips_clk + 8) / 16;
- div = (baseclk + (gd->baudrate / 2)) / gd->baudrate;
-
- out_8(&psc->ctur, (div >> 8) & 0xff);
- out_8(&psc->ctlr, div & 0xff); /* set baudrate */
-}
-
-int serial_init(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- fifo_init (psc);
-
- /* set MR register to point to MR1 */
- out_8(&psc->command, PSC_SEL_MODE_REG_1);
-
- /* disable Tx/Rx */
- out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE);
-
- /* choose the prescaler by 16 for the Tx/Rx clock generation */
- out_be16(&psc->psc_clock_select, 0xdd00);
-
- /* switch to UART mode */
- out_be32(&psc->sicr, 0);
-
- /* mode register points to mr1 */
- /* configure parity, bit length and so on in mode register 1*/
- out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
- /* now, mode register points to mr2 */
- out_8(&psc->mode, PSC_MODE_1_STOPBIT);
-
- /* set baudrate */
- serial_setbrg();
-
- /* disable all interrupts */
- out_be16(&psc->psc_imr, 0);
-
- /* reset and enable Rx/Tx */
- out_8(&psc->command, PSC_RST_RX);
- out_8(&psc->command, PSC_RST_TX);
- out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
-
- return 0;
-}
-
-void serial_putc (const char c)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- if (c == '\n')
- serial_putc ('\r');
-
- /* Wait for last character to go. */
- while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
- ;
-
- out_8(&psc->tfdata_8, c);
-}
-
-void serial_putc_raw (const char c)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- /* Wait for last character to go. */
- while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
- ;
-
- out_8(&psc->tfdata_8, c);
-}
-
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- /* Wait for a character to arrive. */
- while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY)
- ;
-
- return in_8(&psc->rfdata_8);
-}
-
-int serial_tstc (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY);
-}
-
-void serial_setrts(int s)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- if (s) {
- /* Assert RTS (become LOW) */
- out_8(&psc->op1, 0x1);
- }
- else {
- /* Negate RTS (become HIGH) */
- out_8(&psc->op0, 0x1);
- }
-}
-
-int serial_getcts(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- return (in_8(&psc->ip) & 0x1) ? 0 : 1;
-}
-#endif /* CONFIG_PSC_CONSOLE */
+++ /dev/null
-/*
- * (C) Copyright 2000-2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC83xx code.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int spmf_mult[] = {
- 68, 1, 12, 16,
- 20, 24, 28, 32,
- 36, 40, 44, 48,
- 52, 56, 60, 64
-};
-
-static int cpmf_mult[][2] = {
- {0, 1}, {0, 1}, /* 0 and 1 are not valid */
- {1, 1}, {3, 2},
- {2, 1}, {5, 2},
- {3, 1}, {7, 2},
- {0, 1}, {0, 1}, /* and all above 7 are not valid too */
- {0, 1}, {0, 1},
- {0, 1}, {0, 1},
- {0, 1}, {0, 1}
-};
-
-static int sys_dividors[][2] = {
- {2, 1}, {5, 2}, {3, 1}, {7, 2}, {4, 1},
- {9, 2}, {5, 1}, {7, 1}, {6, 1}, {8, 1},
- {9, 1}, {11, 1}, {10, 1}, {12, 1}, {13, 1},
- {15, 1}, {14, 1}, {16, 1}, {17, 1}, {19, 1},
- {18, 1}, {20, 1}, {21, 1}, {23, 1}, {22, 1},
- {24, 1}, {25, 1}, {27, 1}, {26, 1}, {28, 1},
- {29, 1}, {31, 1}, {30, 1}, {32, 1}, {33, 1}
-};
-
-int get_clocks (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u8 spmf;
- u8 cpmf;
- u8 sys_div;
- u8 ips_div;
- u8 pci_div;
- u32 ref_clk = CONFIG_SYS_MPC512X_CLKIN;
- u32 spll;
- u32 sys_clk;
- u32 core_clk;
- u32 csb_clk;
- u32 ips_clk;
- u32 pci_clk;
- u32 reg;
-
- reg = in_be32(&im->sysconf.immrbar);
- if ((reg & IMMRBAR_BASE_ADDR) != (u32) im)
- return -1;
-
- reg = in_be32(&im->clk.spmr);
- spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
- spll = ref_clk * spmf_mult[spmf];
-
- reg = in_be32(&im->clk.scfr[1]);
- sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT;
- sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0];
-
- csb_clk = sys_clk / 2;
-
- reg = in_be32(&im->clk.spmr);
- cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT;
- core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1];
-
- reg = in_be32(&im->clk.scfr[0]);
- ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT;
- if (ips_div != 0) {
- ips_clk = csb_clk / ips_div;
- } else {
- /* in case we cannot get a sane IPS divisor, fail gracefully */
- ips_clk = 0;
- }
-
- reg = in_be32(&im->clk.scfr[0]);
- pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT;
- if (pci_div != 0) {
- pci_clk = csb_clk / pci_div;
- } else {
- /* in case we cannot get a sane IPS divisor, fail gracefully */
- pci_clk = 333333;
- }
-
- gd->ips_clk = ips_clk;
- gd->pci_clk = pci_clk;
- gd->csb_clk = csb_clk;
- gd->cpu_clk = core_clk;
- gd->bus_clk = csb_clk;
- return 0;
-
-}
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- return gd->csb_clk;
-}
-
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char buf[32];
-
- printf("Clock configuration:\n");
- printf(" CPU: %-4s MHz\n", strmhz(buf, gd->cpu_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
- printf(" IPS Bus: %-4s MHz\n", strmhz(buf, gd->ips_clk));
- printf(" PCI: %-4s MHz\n", strmhz(buf, gd->pci_clk));
- printf(" DDR: %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
- return 0;
-}
-
-U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "print clock configuration",
- " clocks"
-);
-
-int prt_mpc512x_clks (void)
-{
- do_clocks (NULL, 0, 0, NULL);
- return (0);
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000-2009 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC83xx code.
- */
-
-/*
- * U-Boot - Startup Code for MPC512x based Embedded Boards
- */
-
-#include <config.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_521X 1 /* needed for Linux kernel header files*/
-
-#include <asm/immap_512x.h>
-#include "asm-offsets.h"
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC512X"
-#endif
-
-/*
- * Floating Point enable, Machine Check and Recoverable Interr.
- */
-#undef MSR_KERNEL
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/* Macros for manipulating CSx_START/STOP */
-#define START_REG(start) ((start) >> 16)
-#define STOP_REG(start, size) (((start) + (size) - 1) >> 16)
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Magic number and version string
- */
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii " ", CONFIG_IDENT_STRING, "\0"
-
-/*
- * Vector Table
- */
- .text
- . = EXC_OFF_SYS_RESET
-
- .globl _start
- /* Start from here after reset/power on */
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, UnknownException)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-/* Floating Point Unit unavailable exception */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-/* Decrementer */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
-/* Critical interrupt */
- STD_EXCEPTION(0xa00, Critical, UnknownException)
-
-/* System Call */
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-/* Trace interrupt */
- STD_EXCEPTION(0xd00, Trace, UnknownException)
-
-/* Performance Monitor interrupt */
- STD_EXCEPTION(0xf00, PerfMon, UnknownException)
-
-/* Intruction Translation Miss */
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
-
-/* Data Load Translation Miss */
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
-
-/* Data Store Translation Miss */
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-
-/* Instruction Address Breakpoint */
- STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException)
-
-/* System Management interrupt */
- STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-boot_cold:
- /* Save msr contents */
- mfmsr r5
-
- /* Set IMMR area to our preferred location */
- lis r4, CONFIG_DEFAULT_IMMR@h
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
- stw r3, IMMRBAR(r4)
- mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */
-
- /* Initialise the machine */
- bl cpu_early_init
-
- /*
- * Set up Local Access Windows:
- *
- * 1) Boot/CS0 (boot FLASH)
- * 2) On-chip SRAM (initial stack purposes)
- */
-
- /* Boot CS/CS0 window range */
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
-
- lis r4, START_REG(CONFIG_SYS_FLASH_BASE)
- ori r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)
- stw r4, LPCS0AW(r3)
-
- /*
- * The SRAM window has a fixed size (256K), so only the start address
- * is necessary
- */
- lis r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00
- stw r4, SRAMBAR(r3)
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- lwz r4, SRAMBAR(r3)
- isync
-
- /*
- * Set configuration of the Boot/CS0, the SRAM window does not have a
- * config register so no params can be set for it
- */
- lis r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h
- ori r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l
-
- lis r4, CONFIG_SYS_CS0_CFG@h
- ori r4, r4, CONFIG_SYS_CS0_CFG@l
- stw r4, CS0_CONFIG(r3)
-
- /* Master enable all CS's */
- lis r4, CS_CTRL_ME@h
- ori r4, r4, CS_CTRL_ME@l
- stw r4, CS_CTRL(r3)
-
- lis r4, (CONFIG_SYS_MONITOR_BASE)@h
- ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
- addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r5
- blr
-
-in_flash:
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable & stack humble */
- /*------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- lis r3, CONFIG_SYS_IMMR@h
- /* run low-level CPU init code (in Flash) */
- bl cpu_init_f
-
- /* r3: BOOTFLAG */
- mr r3, r21
- /* run 1st part of board init code (in Flash) */
- bl board_init_f
-
- /* NOTREACHED - board_init_f() does not return */
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the machine, it expects original MSR contents to be in r5.
- */
-cpu_early_init:
- /* Initialize machine status; enable machine check interrupt */
- /*-----------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */
-#endif
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */
-
- lis r3, CONFIG_SYS_IMMR@h
-
-#if defined(CONFIG_WATCHDOG)
- /* Initialise the watchdog and reset it */
- /*--------------------------------------*/
- lis r4, CONFIG_SYS_WATCHDOG_VALUE
- ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
- stw r4, SWCRR(r3)
-
- /* reset */
- li r4, 0x556C
- sth r4, SWSRR@l(r3)
- li r4, 0x0
- ori r4, r4, 0xAA39
- sth r4, SWSRR@l(r3)
-#else
- /* Disable the watchdog */
- /*----------------------*/
- lwz r4, SWCRR(r3)
- /*
- * Check to see if it's enabled for disabling: once disabled by s/w
- * it's not possible to re-enable it
- */
- andi. r4, r4, 0x4
- beq 1f
- xor r4, r4, r4
- stw r4, SWCRR(r3)
-1:
-#endif /* CONFIG_WATCHDOG */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*------------------------------------------------------*/
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- SYNC
- mtspr HID2, r3
- sync
- blr
-
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*-------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
- * + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* copy */
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
-
- addi r0,r5,3
- srwi. r0,r0,2
- mtctr r0
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* and compare */
-20: lwzu r20,4(r8)
- lwzu r21,4(r7)
- xor. r22, r20, r21
- bne 30f
- bdnz 20b
- b 4f
-
- /* compare failed */
-30: li r3, 0
- blr
-
-2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_Trace - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware
- * exceptions
- */
-
-#include <common.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace (unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf ("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *) *sp;
- }
- putc ('\n');
-}
-
-void show_regs (struct pt_regs * regs)
-{
- int i;
-
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0,
- regs->msr & MSR_IR ? 1 : 0,
- regs->msr & MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
- }
-
- printf ("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception (int signr, struct pt_regs *regs)
-{
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Exception at pc %lx signal %d", regs->nip,signr);
-}
-
-
-void
-MachineCheckException (struct pt_regs *regs)
-{
- unsigned long fixup;
-
- if ((fixup = search_exception_table (regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check.\nCaused by (from msr): ");
- printf ("regs %p ",regs);
- switch (regs->msr & 0x00FF0000) {
- case (0x80000000 >> 10):
- puts ("Instruction cache parity signal\n");
- break;
- case (0x80000000 >> 11):
- puts ("Data cache parity signal\n");
- break;
- case (0x80000000 >> 12):
- puts ("Machine check signal\n");
- break;
- case (0x80000000 >> 13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
-
- panic ("machine check");
-}
-
-void
-AlignmentException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Alignment Exception");
-}
-
-void
-ProgramCheckException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Program Check Exception");
-}
-
-void
-SoftEmuException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Software Emulation Exception");
-}
-
-
-void
-UnknownException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
-}
-
-#ifdef CONFIG_CMD_BEDBUG
-extern void do_bedbug_breakpoint (struct pt_regs *);
-#endif
-
-void
-DebugException (struct pt_regs *regs)
-{
- printf ("Debugger trap at @ %lx\n", regs->nip );
- show_regs (regs);
-#ifdef CONFIG_CMD_BEDBUG
- do_bedbug_breakpoint (regs);
-#endif
-}
+++ /dev/null
-/*
- * (C) Copyright 2007 DENX Software Engineering.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc512x/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
-ENTRY(_start)
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# File: arch/ppc/cpu/mpc5xx/Makefile
-#
-# Discription: Makefile to build mpc5xx cpu configuration.
-# Will include top config.mk which itselfs
-# uses the definitions made in arch/ppc/cpu/mpc5xx/config.mk
-#
-
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# File: config.mk
-#
-# Discription: compiler flags and make definitions
-#
-
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xx/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: cpu.c
- *
- * Discription: Some cpu specific function for watchdog,
- * cpu version test, clock setting ...
- *
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined(CONFIG_MPC555))
-# define ID_STR "MPC555/556"
-
-/*
- * Check version of cpu with Processor Version Register (PVR)
- */
-static int check_cpu_version (long clock, uint pvr, uint immr)
-{
- char buf[32];
- /* The highest 16 bits should be 0x0002 for a MPC555/556 */
- if ((pvr >> 16) == 0x0002) {
- printf (" " ID_STR " Version %x", (pvr >> 16));
- printf (" at %s MHz:", strmhz (buf, clock));
- } else {
- printf ("Not supported cpu version");
- return -1;
- }
- return 0;
-}
-#endif /* CONFIG_MPC555 */
-
-
-/*
- * Check version of mpc5xx
- */
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- uint immr = get_immr (0); /* Return full IMMR contents */
- uint pvr = get_pvr (); /* Retrieve PVR register */
-
- puts ("CPU: ");
-
- return check_cpu_version (clock, pvr, immr);
-}
-
-/*
- * Called by macro WATCHDOG_RESET
- */
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-
-/*
- * Will clear software reset
- */
-void reset_5xx_watchdog (volatile immap_t * immr)
-{
- /* Use the MPC5xx Internal Watchdog */
- immr->im_siu_conf.sc_swsr = 0x556c; /* Prevent SW time-out */
- immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-
-#endif /* CONFIG_WATCHDOG */
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
- volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
- ulong oscclk, factor;
-
- if (immr->im_clkrst.car_sccr & SCCR_TBS) {
- return (gd->cpu_clk / 16);
- }
-
- factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
-
- oscclk = gd->cpu_clk / factor;
-
- if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
- return (oscclk / 4);
- }
- return (oscclk / 16);
-}
-
-void dcache_enable (void)
-{
- return;
-}
-
-void dcache_disable (void)
-{
- return;
-}
-
-int dcache_status (void)
-{
- return 0; /* always off */
-}
-
-/*
- * Reset board
- */
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-#if defined(CONFIG_PATI)
- volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
- *addr = 1;
-#else
- ulong addr;
-
- /* Interrupts off, enable reset */
- __asm__ volatile (" mtspr 81, %r0 \n\t"
- " mfmsr %r3 \n\t"
- " rlwinm %r31,%r3,0,25,23\n\t"
- " mtmsr %r31 \n\t");
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*) (void)) addr) ();
-#endif /* #if defined(CONFIG_PATI) */
- return 1;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: cpu_init.c
- *
- * Discription: Contains initialisation functions to setup
- * the cpu properly
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <watchdog.h>
-
-/*
- * Setup essential cpu registers to run
- */
-void cpu_init_f (volatile immap_t * immr)
-{
- volatile memctl5xx_t *memctl = &immr->im_memctl;
- ulong reg;
-
- /* SYPCR - contains watchdog control. This will enable watchdog */
- /* if CONFIG_WATCHDOG is set */
- immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
-
- /* SIUMCR - contains debug pin configuration */
- immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-
- /* Initialize timebase. Unlock TBSCRK */
- immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
- immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
- /* Full IMB bus speed */
- immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
-
- /* Time base and decrementer will be enables (TBE) */
- /* in init_timebase() in time.c called from board_init_f(). */
-
- /* Initialize the PIT. Unlock PISCRK */
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-#if !defined(CONFIG_PATI)
- /* PATI sest PLL in start.S */
- /* PLL (CPU clock) settings */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
- * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
- * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
- * field value.
- */
-#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
- reg = CONFIG_SYS_PLPRCR; /* reset control bits */
-#else
- reg = immr->im_clkrst.car_plprcr;
- reg &= PLPRCR_MF_MSK; /* isolate MF field */
- reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
-#endif
- immr->im_clkrst.car_plprcr = reg;
-
-#endif /* !defined(CONFIG_PATI) */
-
- /* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
- immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
- reg = immr->im_clkrst.car_sccr;
- reg &= SCCR_MASK;
- reg |= CONFIG_SYS_SCCR;
- immr->im_clkrst.car_sccr = reg;
-
- /* Memory Controller */
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-}
-
-/*
- * Initialize higher level parts of cpu
- */
-int cpu_init_r (void)
-{
- /* Nothing to do at the moment */
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: interrupt.c
- *
- * Discription: Contains interrupt routines needed by U-Boot
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_PATI)
-/* PATI uses IRQs for PCI doorbell */
-#undef NR_IRQS
-#define NR_IRQS 16
-#endif
-
-struct interrupt_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-/*
- * Initialise interrupts
- */
-
-int interrupt_init_cpu (ulong *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int vec;
-
- /* Decrementer used here for status led */
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- /* Disable all interrupts */
- immr->im_siu_conf.sc_simask = 0;
- for (vec=0; vec<NR_IRQS; vec++) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
- return (0);
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- ulong simask, newmask;
- ulong vec, v_bit;
-
- /*
- * read the SIVEC register and shift the bits down
- * to get the irq number
- */
- vec = immr->im_siu_conf.sc_sivec;
- irq = vec >> 26;
- v_bit = 0x80000000UL >> irq;
-
- /*
- * Read Interrupt Mask Register and Mask Interrupts
- */
- simask = immr->im_siu_conf.sc_simask;
- newmask = simask & (~(0xFFFF0000 >> irq));
- immr->im_siu_conf.sc_simask = newmask;
-
- if (!(irq & 0x1)) { /* External Interrupt ? */
- ulong siel;
-
- /*
- * Read Interrupt Edge/Level Register
- */
- siel = immr->im_siu_conf.sc_siel;
-
- if (siel & v_bit) { /* edge triggered interrupt ? */
- /*
- * Rewrite SIPEND Register to clear interrupt
- */
- immr->im_siu_conf.sc_sipend = v_bit;
- }
- }
-
- if (irq_vecs[irq].handler != NULL) {
- irq_vecs[irq].handler (irq_vecs[irq].arg);
- } else {
- printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
- irq, vec);
- /* turn off the bogus interrupt to avoid it from now */
- simask &= ~v_bit;
- }
- /*
- * Re-Enable old Interrupt Mask
- */
- immr->im_siu_conf.sc_simask = simask;
-}
-
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
- void *arg)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- /* SIU interrupt */
- if (irq_vecs[vec].handler != NULL) {
- printf ("SIU interrupt %d 0x%x\n",
- vec,
- (uint) handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
- immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
- printf ("Install SIU interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
-}
-
-void irq_free_handler (int vec)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- /* SIU interrupt */
-#if 0
- printf ("Free CPM interrupt for vector %d\n",
- vec);
-#endif
- immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
-}
-
-/*
- * Timer interrupt - gets called when bit 0 of DEC changes from
- * 0. Decrementer is enabled with bit TBE in TBSCR.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
- printf ("*** Timer Interrupt *** ");
-#endif
- /* Reset Timer Status Bit and Timers Interrupt Status */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
- __asm__ ("nop");
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
-
- return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-/*******************************************************************************
- *
- * irqinfo - print information about IRQs
- *
- */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("\nInterrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<NR_IRQS; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
- return 0;
-}
-
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: serial.c
- *
- * Discription: Serial interface driver for SCI1 and SCI2.
- * Since this code will be called from ROM use
- * only non-static local variables.
- *
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Local function prototypes
- */
-
-static int ready_to_send(void);
-
-/*
- * Minimal global serial functions needed to use one of the SCI modules.
- */
-
-int serial_init (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- serial_setbrg();
-
-#if defined(CONFIG_5xx_CONS_SCI1)
- /* 10-Bit, 1 start bit, 8 data bit, no parity, 1 stop bit */
- immr->im_qsmcm.qsmcm_scc1r1 = SCI_M_10;
- immr->im_qsmcm.qsmcm_scc1r1 = SCI_TE | SCI_RE;
-#else
- immr->im_qsmcm.qsmcm_scc2r1 = SCI_M_10;
- immr->im_qsmcm.qsmcm_scc2r1 = SCI_TE | SCI_RE;
-#endif
- return 0;
-}
-
-void serial_putc(const char c)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- /* Test for completition */
- if(ready_to_send()) {
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_sc1dr = (short)c;
-#else
- immr->im_qsmcm.qsmcm_sc2dr = (short)c;
-#endif
- if(c == '\n') {
- if(ready_to_send());
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_sc1dr = (short)'\r';
-#else
- immr->im_qsmcm.qsmcm_sc2dr = (short)'\r';
-#endif
- }
- }
-}
-
-int serial_getc(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile short status;
- unsigned char tmp;
-
- /* New data ? */
- do {
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
- } while ((status & SCI_RDRF) == 0);
-
- /* Read data */
-#if defined(CONFIG_5xx_CONS_SCI1)
- tmp = (unsigned char)(immr->im_qsmcm.qsmcm_sc1dr & SCI_SCXDR_MK);
-#else
- tmp = (unsigned char)( immr->im_qsmcm.qsmcm_sc2dr & SCI_SCXDR_MK);
-#endif
- return tmp;
-}
-
-int serial_tstc()
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- short status;
-
- /* New data character ? */
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
- return (status & SCI_RDRF);
-}
-
-void serial_setbrg (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- short scxbr;
-
- /* Set baudrate */
- scxbr = (gd->cpu_clk / (32 * gd->baudrate));
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_scc1r0 = (scxbr & SCI_SCXBR_MK);
-#else
- immr->im_qsmcm.qsmcm_scc2r0 = (scxbr & SCI_SCXBR_MK);
-#endif
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc(*s);
- ++s;
- }
-}
-
-int ready_to_send(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile short status;
-
- do {
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
- } while ((status & SCI_TDRE) == 0);
- return 1;
-
-}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: speed.c
- *
- * Discription: Provides cpu speed calculation
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Get cpu and bus clock
- */
-int get_clocks (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#ifndef CONFIG_5xx_GCLK_FREQ
- uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
- uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
- ulong vcoout;
-
- vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
- if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
- gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
- } else {
- gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
- }
-
-#else /* CONFIG_5xx_GCLK_FREQ */
- gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
-#endif /* CONFIG_5xx_GCLK_FREQ */
-
- if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
- /* No Bus Divider active */
- gd->bus_clk = gd->cpu_clk;
- } else {
- /* CLKOUT is GCLK / 2 */
- gd->bus_clk = gd->cpu_clk / 2;
- }
- return (0);
-}
+++ /dev/null
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC5xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- * Ported to MPC5xx
- * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/5xx_immap.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <net.h>
-
-#if defined(CONFIG_SPI)
-
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-
-void spi_init_f (void)
-{
- int i;
-
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
- qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
- qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PQSPAR[00] = 0 reserved
- * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
- * PQSPAR[02] = 0 [0x0000] -> GPIO
- * PQSPAR[03] = 0 [0x0000] -> GPIO
- * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
- * PQSPAR[05] = 0 reseved
- * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
- * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
- * -------------------------------------------- */
- qsmcm->qsmcm_pqspar = 0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
-
- /* --------------------------------------------
- * DDRQS[00] = 0 reserved
- * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
- * DDRQS[02] = 0 [0x0000] -> GPIO Output
- * DDRQS[03] = 0 [0x0000] -> GPIO Output
- * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
- * DDRQS[05] = 1 [0x0004] -> SPICLK Output
- * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
- * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
- * -------------------------------------------- */
- qsmcm->qsmcm_ddrqs = 0x7E;
- /* --------------------------------------------
- * Base state for used SPI CS pins, if base = 0 active must be 1
- * PORTQS[00] = 0 reserved
- * PORTQS[01] = 0 reserved
- * PORTQS[02] = 0 reserved
- * PORTQS[03] = 0 reserved
- * PORTQS[04] = 0 [0x0000] RxD2
- * PORTQS[05] = 1 [0x0400] TxD2
- * PORTQS[06] = 0 [0x0000] RxD1
- * PORTQS[07] = 1 [0x0100] TxD1
- * PORTQS[08] = 0 reserved
- * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
- * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
- * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
- * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
- * PORTQS[13] = 0 [0x0004] -> SPICLK Output
- * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
- * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
- * -------------------------------------------- */
- qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
- /* --------------------------------------------
- * Controll Register 0
- * SPCR0[00] = 1 (0x8000) Master
- * SPCR0[01] = 0 (0x0000) Wired-Or
- * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
- * SPCR0[06] = 0 (0x0000) Normal polarity
- * SPCR0[07] = 0 (0x0000) Normal Clock Phase
- * SPCR0[08..15] = 14 1.4MHz
- */
- qsmcm->qsmcm_spcr0=0xA00E;
- /* --------------------------------------------
- * Controll Register 1
- * SPCR1[00] = 0 (0x0000) QSPI enabled
- * SPCR1[1..7] = (0x7F00) Delay before Transfer
- * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
- */
- qsmcm->qsmcm_spcr1=0x7F00;
- /* --------------------------------------------
- * Controll Register 2
- * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
- * SPCR2[01] = 0 (0x0000) No Wrap around
- * SPCR2[02] = 0 (0x0000) Wrap to 0
- * SPCR2[3..7] = (0x0000) End Queue pointer = 0
- * SPCR2[8..10] = 0 (0x0000) reserved
- * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
- */
- qsmcm->qsmcm_spcr2=0x0000;
- /* --------------------------------------------
- * Controll Register 3
- * SPCR3[00..04] = 0 (0x0000) reserved
- * SPCR3[05] = 0 (0x0000) Feedback disabled
- * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
- * SPCR3[07] = 0 (0x0000) Not halted
- */
- qsmcm->qsmcm_spcr3=0x00;
- /* --------------------------------------------
- * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
- * SPCR3[08] = 1 (0x80) QSPI finished
- * SPCR3[09] = 1 (0x40) Mode Fault Flag
- * SPCR3[10] = 1 (0x20) HALTA
- * SPCR3[11..15] = 0 (0x0000) Last executed command
- */
- qsmcm->qsmcm_spsr=0xE0;
- /*-------------------------------------------
- * Setup RAM
- */
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- * Dummy, all initializations have been done in spi_init_r
- * *********************************************************************** */
-void spi_init_r (void)
-{
- return;
-
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i,dlen;
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- i=0;
- qsmcm->qsmcm_tranram[i++] = SPI_EEPROM_WRITE; /* WRITE memory array */
- qsmcm->qsmcm_tranram[i++] = addr[0];
- qsmcm->qsmcm_tranram[i++] = addr[1];
-
- for(dlen=0;dlen<len;dlen++) {
- qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
- }
- /* transmit it */
- spi_xfer(i+dlen);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- qsmcm->qsmcm_tranram[0] = SPI_EEPROM_RDSR; /* read status */
- qsmcm->qsmcm_tranram[1] = 0;
- spi_xfer(2);
- if (!(qsmcm->qsmcm_recram[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
- return len;
-}
-
-#define TRANSFER_LEN 16
-
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int index,i,newlen;
- uchar newaddr[2];
- int curraddr;
-
- curraddr=(addr[alen-2]<<8)+addr[alen-1];
- i=len;
- index=0;
- do {
- newaddr[1]=(curraddr & 0xff);
- newaddr[0]=((curraddr>>8) & 0xff);
- if(i>TRANSFER_LEN) {
- newlen=TRANSFER_LEN;
- i-=TRANSFER_LEN;
- }
- else {
- newlen=i;
- i=0;
- }
- short_spi_write (newaddr, 2, &buffer[index], newlen);
- index+=newlen;
- curraddr+=newlen;
- }while(i);
- return (len);
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- i=0;
- qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
- qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
- qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
- spi_xfer(3 + len);
- for(i=0;i<len;i++) {
- *buffer++=(char)qsmcm->qsmcm_recram[i+3];
- }
- return len;
-}
-
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- int index,i,newlen;
- uchar newaddr[2];
- int curraddr;
-
- curraddr=(addr[alen-2]<<8)+addr[alen-1];
- i=len;
- index=0;
- do {
- newaddr[1]=(curraddr & 0xff);
- newaddr[0]=((curraddr>>8) & 0xff);
- if(i>TRANSFER_LEN) {
- newlen=TRANSFER_LEN;
- i-=TRANSFER_LEN;
- }
- else {
- newlen=i;
- i=0;
- }
- short_spi_read (newaddr, 2, &buffer[index], newlen);
- index+=newlen;
- curraddr+=newlen;
- }while(i);
- return (len);
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
- int i;
- int tm;
- ushort status;
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
- DPRINT (("*** spi_xfer entered count %d***\n",count));
-
- /* Set CS for device */
- for(i=0;i<(count-1);i++)
- qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
-
- qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
- qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
-
- qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- qsmcm->qsmcm_spcr1 |= 0x8000; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- status=qsmcm->qsmcm_spcr1;
- if((status & 0x8000)==0)
- break;
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_tranram, 32); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_recram, 32); /* dump of rxbuf after transmit */
- printf ("\nspi_xfer: commbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_comdram, 32); /* dump of txbuf before transmit */
- printf ("\n");
-#endif
-
- return count;
-}
-
-#endif /* CONFIG_SPI */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001, 2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * File: start.S
- *
- * Discription: startup code
- *
- */
-
-#include <config.h>
-#include <mpc5xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_5xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <linux/config.h>
-#include <asm/processor.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't have a MMU.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- mfspr r3, 638
- li r4, CONFIG_SYS_ISB /* Set ISB bit */
- or r3, r3, r4
- mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x20
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize debug port registers */
- /*----------------------------------------------------------------------*/
- xor r0, r0, r0 /* Clear R0 */
- mtspr LCTRL1, r0 /* Initialize debug port regs */
- mtspr LCTRL2, r0
- mtspr COUNTA, r0
- mtspr COUNTB, r0
-
-#if defined(CONFIG_PATI)
- /* the external flash access on PATI fails if programming the PLL to 40MHz.
- * Copy the PLL programming code to the internal RAM and execute it
- *----------------------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
-
- lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
- mtlr r4
- addis r5,0,0x0
- ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
- mtctr r5
- addi r3, r3, -4
- addi r4, r4, -4
-0:
- lwzu r0,4(r3)
- stwu r0,4(r4)
- bdnz 0b /* copy loop */
- blrl
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-
- /* Initialize some SPRs that are hard to access from C */
- /*----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* Pass IMMR as arg1 to C routine */
- lis r2, CONFIG_SYS_INIT_SP_ADDR@h
- ori r1, r2, CONFIG_SYS_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
- /* Note: R0 is still 0 here */
- stwu r0, -4(r1) /* Clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /*
- * Disable serialized ifetch and show cycles
- * (i.e. set processor to normal mode) for maximum
- * performance.
- */
-
- li r2, 0x0007
- mtspr ICTRL, r2
-
- /* Set up debug mode entry */
-
- lis r2, CONFIG_SYS_DER@h
- ori r2, r2, CONFIG_SYS_DER@l
- mtspr DER, r2
-
- /* Let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* FPU on MPC5xx available. We will use it later.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
- .globl get_immr
-get_immr:
- mr r4,r3 /* save mask */
- mfspr r3, IMMR /* IMMR */
- cmpwi 0,r4,0 /* mask != 0 ? */
- beq 4f
- and r3,r3,r4 /* IMMR & mask */
-4:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer in SRAM */
- mr r9, r4 /* Save copy of global data pointer in SRAM */
- mr r10, r5 /* Save copy of monitor destination Address in SRAM */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 4f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-4: sync
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_PATI)
-/* Program the PLL */
-pll_prog_code_start:
- lis r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
- ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
- lis r3, (0x55ccaa33)@h
- ori r3, r3, (0x55ccaa33)@l
- stw r3, 0(r4)
- lis r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
- ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
- lis r3, CONFIG_SYS_PLPRCR@h
- ori r3, r3, CONFIG_SYS_PLPRCR@l
- stw r3, 0(r4)
- addis r3,0,0x0
- ori r3,r3,0xA000
- mtctr r3
-..spinlp:
- bdnz ..spinlp /* spin loop */
- blr
-pll_prog_code_end:
- nop
- blr
-#endif
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x0001000
-
-
-/*
- * Print stack backtrace
- */
-void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-/*
- * Print current registers
- */
-void show_regs(struct pt_regs * regs)
-{
- int i;
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-/*
- * General exception handler routine
- */
-void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-/*
- * Machine check exception handler routine
- */
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-/*
- * Alignment exception handler routine
- */
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-/*
- * Program check exception handler routine
- */
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-/*
- * Software emulation exception handler routine
- */
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-/*
- * Unknown exception handler routine
- */
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/*
- * Debug exception handler routine
- */
-void DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
+++ /dev/null
-/*
- * (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/ppc/cpu/mpc5xx/start.o (.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
-
- _end = . ;
- PROVIDE (end = .);
-/* . = env_start;
- .ppcenv :
- {
- common/env_embedded.o (.ppcenv)
- }
-*/
-}
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = io.o firmware_sc_task_bestcomm.impl.o
-COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
- loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC5xxx CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <net.h>
-#include <mpc5xxx.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-#if defined(CONFIG_OF_IDE_FIXUP)
-#include <ide.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- char buf[32];
- uint svr, pvr;
-
- puts ("CPU: ");
-
- svr = get_svr();
- pvr = get_pvr();
-
- switch (pvr) {
- case PVR_5200:
- printf("MPC5200");
- break;
- case PVR_5200B:
- printf("MPC5200B");
- break;
- default:
- printf("Unknown MPC5xxx");
- break;
- }
-
- printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
- PVR_MAJ(pvr), PVR_MIN(pvr));
- printf (" at %s MHz\n", strmhz (buf, clock));
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* Charge the watchdog timer */
- *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0x0001000f;
- *(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */
- while(1);
-
- return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4;
- char * cpu_path = "/cpus/" OF_CPU;
-#ifdef CONFIG_MPC5xxx_FEC
- uchar enetaddr[6];
- char * eth_path = "/" OF_SOC "/ethernet@3000";
-#endif
-
- do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency",
- bd->bi_busfreq*div, 1);
-#ifdef CONFIG_MPC5xxx_FEC
- eth_getenv_enetaddr("ethaddr", enetaddr);
- do_fixup_by_path(blob, eth_path, "mac-address", enetaddr, 6, 0);
- do_fixup_by_path(blob, eth_path, "local-mac-address", enetaddr, 6, 0);
-#endif
-#if defined(CONFIG_OF_IDE_FIXUP)
- if (!ide_device_present(0)) {
- /* NO CF card detected -> delete ata node in DTS */
- int nodeoffset = 0;
- char nodename[] = "/soc5200@f0000000/ata@3a00";
-
- nodeoffset = fdt_path_offset(blob, nodename);
- if (nodeoffset >= 0) {
- fdt_del_node(blob, nodeoffset);
- } else {
- printf("%s: cannot find %s node err:%s\n",
- __func__, nodename, fdt_strerror(nodeoffset));
- }
- }
-
-#endif
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
-
- *save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | a;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
-
- if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
- return 0;
- else
- return (*save_addr & 0x0000ffff);
-}
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
-
-#ifdef CONFIG_MPC5xxx_FEC
-/* Default initializations for FEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(bd_t *bis)
- */
-
-int cpu_eth_init(bd_t *bis)
-{
- return mpc5xxx_fec_initialize(bis);
-}
-#endif
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_5xxx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void reset_5xxx_watchdog(void)
-{
- volatile struct mpc5xxx_gpt *gpt0 =
- (struct mpc5xxx_gpt *) MPC5XXX_GPT;
-
- /* Trigger TIMER_0 by writing A5 to OCPW */
- clrsetbits_be32(&gpt0->emsr, 0xff000000, 0xa5000000);
-}
-#endif /* CONFIG_WATCHDOG */
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_lpb *lpb =
- (struct mpc5xxx_lpb *) MPC5XXX_LPB;
- volatile struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
- volatile struct mpc5xxx_xlb *xlb =
- (struct mpc5xxx_xlb *) MPC5XXX_XLBARB;
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *) MPC5XXX_CDM;
-#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
-#if defined(CONFIG_WATCHDOG)
- volatile struct mpc5xxx_gpt *gpt0 =
- (struct mpc5xxx_gpt *) MPC5XXX_GPT;
-#endif /* CONFIG_WATCHDOG */
- unsigned long addecr = (1 << 25); /* Boot_CS */
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /*
- * Memory Controller: configure chip selects and enable them
- */
-#if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE)
- out_be32(&mm->boot_start, START_REG(CONFIG_SYS_BOOTCS_START));
- out_be32(&mm->boot_stop, STOP_REG(CONFIG_SYS_BOOTCS_START,
- CONFIG_SYS_BOOTCS_SIZE));
-#endif
-#if defined(CONFIG_SYS_BOOTCS_CFG)
- out_be32(&lpb->cs0_cfg, CONFIG_SYS_BOOTCS_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE)
- out_be32(&mm->cs0_start, START_REG(CONFIG_SYS_CS0_START));
- out_be32(&mm->cs0_stop, STOP_REG(CONFIG_SYS_CS0_START,
- CONFIG_SYS_CS0_SIZE));
- /* CS0 and BOOT_CS cannot be enabled at once. */
- /* addecr |= (1 << 16); */
-#endif
-#if defined(CONFIG_SYS_CS0_CFG)
- out_be32(&lpb->cs0_cfg, CONFIG_SYS_CS0_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE)
- out_be32(&mm->cs1_start, START_REG(CONFIG_SYS_CS1_START));
- out_be32(&mm->cs1_stop, STOP_REG(CONFIG_SYS_CS1_START,
- CONFIG_SYS_CS1_SIZE));
- addecr |= (1 << 17);
-#endif
-#if defined(CONFIG_SYS_CS1_CFG)
- out_be32(&lpb->cs1_cfg, CONFIG_SYS_CS1_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE)
- out_be32(&mm->cs2_start, START_REG(CONFIG_SYS_CS2_START));
- out_be32(&mm->cs2_stop, STOP_REG(CONFIG_SYS_CS2_START,
- CONFIG_SYS_CS2_SIZE));
- addecr |= (1 << 18);
-#endif
-#if defined(CONFIG_SYS_CS2_CFG)
- out_be32(&lpb->cs2_cfg, CONFIG_SYS_CS2_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE)
- out_be32(&mm->cs3_start, START_REG(CONFIG_SYS_CS3_START));
- out_be32(&mm->cs3_stop, STOP_REG(CONFIG_SYS_CS3_START,
- CONFIG_SYS_CS3_SIZE));
- addecr |= (1 << 19);
-#endif
-#if defined(CONFIG_SYS_CS3_CFG)
- out_be32(&lpb->cs3_cfg, CONFIG_SYS_CS3_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE)
- out_be32(&mm->cs4_start, START_REG(CONFIG_SYS_CS4_START));
- out_be32(&mm->cs4_stop, STOP_REG(CONFIG_SYS_CS4_START,
- CONFIG_SYS_CS4_SIZE));
- addecr |= (1 << 20);
-#endif
-#if defined(CONFIG_SYS_CS4_CFG)
- out_be32(&lpb->cs4_cfg, CONFIG_SYS_CS4_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE)
- out_be32(&mm->cs5_start, START_REG(CONFIG_SYS_CS5_START));
- out_be32(&mm->cs5_stop, STOP_REG(CONFIG_SYS_CS5_START,
- CONFIG_SYS_CS5_SIZE));
- addecr |= (1 << 21);
-#endif
-#if defined(CONFIG_SYS_CS5_CFG)
- out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
-#endif
-
- addecr |= 1;
-#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
- out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
- out_be32(&mm->cs6_stop, STOP_REG(CONFIG_SYS_CS6_START,
- CONFIG_SYS_CS6_SIZE));
- addecr |= (1 << 26);
-#endif
-#if defined(CONFIG_SYS_CS6_CFG)
- out_be32(&lpb->cs6_cfg, CONFIG_SYS_CS6_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE)
- out_be32(&mm->cs7_start, START_REG(CONFIG_SYS_CS7_START));
- out_be32(&mm->cs7_stop, STOP_REG(CONFIG_SYS_CS7_START,
- CONFIG_SYS_CS7_SIZE));
- addecr |= (1 << 27);
-#endif
-#if defined(CONFIG_SYS_CS7_CFG)
- out_be32(&lpb->cs7_cfg, CONFIG_SYS_CS7_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS_BURST)
- out_be32(&lpb->cs_burst, CONFIG_SYS_CS_BURST);
-#endif
-#if defined(CONFIG_SYS_CS_DEADCYCLE)
- out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
-#endif
-
- /* Enable chip selects */
- out_be32(&mm->ipbi_ws_ctrl, addecr);
- out_be32(&lpb->cs_ctrl, (1 << 24));
-
- /* Setup pin multiplexing */
-#if defined(CONFIG_SYS_GPS_PORT_CONFIG)
- out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
-#endif
-
- /* enable timebase */
- setbits_be32(&xlb->config, (1 << 13));
-
- /* Enable snooping for RAM */
- setbits_be32(&xlb->config, (1 << 15));
- out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
-
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
- /* Motorola reports IPB should better run at 133 MHz. */
- setbits_be32(&mm->ipbi_ws_ctrl, 1);
- /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
- addecr = in_be32(&cdm->cfg);
- addecr &= ~0x103;
-# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
- /* pci_clk_sel = 0x01 -> IPB_CLK/2 */
- addecr |= 0x01;
-# else
- /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
- addecr |= 0x02;
-# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
- out_be32(&cdm->cfg, addecr);
-#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
-#if defined(CONFIG_SYS_XLB_PIPELINING)
- /* Enable piplining */
- clrbits_be32(&xlb->config, (1 << 31));
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- /* Charge the watchdog timer - prescaler = 64k, count = 64k*/
- out_be32(&gpt0->cir, 0x0000ffff);
- out_be32(&gpt0->emsr, 0x9004); /* wden|ce|timer_ms */
-
- reset_5xxx_watchdog();
-#endif /* CONFIG_WATCHDOG */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- volatile struct mpc5xxx_intr *intr =
- (struct mpc5xxx_intr *) MPC5XXX_ICTL;
-
- /* mask all interrupts */
- out_be32(&intr->per_mask, 0xffffff00);
- setbits_be32(&intr->main_mask, 0x0001ffff);
- clrbits_be32(&intr->ctrl, 0x00000f00);
- /* route critical ints to normal ints */
- setbits_be32(&intr->ctrl, 0x00000001);
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC5xxx_FEC)
- /* load FEC microcode */
- loadtask(0, 2);
-#endif
-
- return (0);
-}
+++ /dev/null
-/*
- * Copyright (C) 2001, Software Center, Motorola China.
- *
- * This file contains microcode for the FEC controller of the MPC5200 CPU.
- */
-
-#include <config.h>
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.align 9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x000000a4
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long CONFIG_SYS_MBAR
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000d0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long CONFIG_SYS_MBAR
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010cf04c /* 0020: DRD2B1: var4 = EU3(); EU3(var1,var12) */
-.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf04e /* 0030: DRD2B1: var6 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020cf04f /* 0038: DRD2B1: var8 = EU3(); EU3(var1,var15) */
-.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
-.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */
-.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
-.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
-.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
-.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
-.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
-.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
-.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04c /* 00A0: DRD2B1: idx0 = EU3(); EU3(var1,var12) */
-.long 0x000001f8 /* 00A4(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80024800 /* 0000: LCDEXT: idx0 = 0xf0008800; ; */
-.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024cf04d /* 0020: DRD2B1: var9 = EU3(); EU3(var1,var13) */
-.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010cf04e /* 0034: DRD2B1: var4 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014cf04f /* 003C: DRD2B1: var5 = EU3(); EU3(var1,var15) */
-.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028cf050 /* 0044: DRD2B1: var10 = EU3(); EU3(var1,var16) */
-.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf051 /* 004C: DRD2B1: var6 = EU3(); EU3(var1,var17) */
-.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01ccf0a1 /* 0058: DRD2B1: var7 = EU3(); EU3(var2,idx1) */
-.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
-.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
-.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
-.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000001 /* 0088: DRD2A: EU0=0 EU1=0 EU2=0 EU3=1 EXT init=0 WS=0 RS=0 */
-.long 0x0c4cfc4d /* 008C: DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
-.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04d /* 00CC: DRD2B1: idx0 = EU3(); EU3(var1,var13) */
-.long 0x000001f8 /* 00D0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long (CONFIG_SYS_MBAR + 0x8800) /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x000005e4 /* var[16] */
-.long 0x0000000e /* var[17] */
-.long 0x000005e0 /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000001 /* inc[2] */
-.long 0x80000000 /* inc[3] */
-.long 0x40000000 /* inc[4] */
-.long 0x00000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long (CONFIG_SYS_MBAR + 0x8800) /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000008 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0x4000ffff /* inc[3] */
-.long 0xe0000001 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 128, 0x0
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc5xxx.h>
-#include <i2c.h>
-
-#if (CONFIG_SYS_I2C_MODULE == 2)
-#define I2C_BASE MPC5XXX_I2C2
-#elif (CONFIG_SYS_I2C_MODULE == 1)
-#define I2C_BASE MPC5XXX_I2C1
-#else
-#error CONFIG_SYS_I2C_MODULE is not properly configured
-#endif
-
-#define I2C_TIMEOUT 6667
-#define I2C_RETRIES 3
-
-struct mpc5xxx_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 *reg);
-static void mpc_reg_out (volatile u32 *reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in(volatile u32 *reg)
-{
- int ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out(volatile u32 *reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in(reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in(®s->msr);
-
- while (timeout-- && (status & I2C_BB)) {
-#if 1
- volatile int temp;
- mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
- temp = mpc_reg_in(®s->mdr);
- mpc_reg_out(®s->mcr, 0, I2C_STA);
- mpc_reg_out(®s->mcr, 0, 0);
- mpc_reg_out(®s->mcr, I2C_EN, 0);
-#endif
- udelay(15);
- status = mpc_reg_in(®s->msr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin(int *status)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in(®s->msr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay(15);
- *status = mpc_reg_in(®s->msr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out(®s->msr, 0, I2C_IF);
-
- return 0;
-}
-
-static int do_address(uchar chip, char rdwr_flag)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag) {
- chip |= 1;
- }
-
- mpc_reg_out(®s->mcr, I2C_TX, I2C_TX);
- mpc_reg_out(®s->mdr, chip, 0);
-
- if (wait_for_pin(&status)) {
- return -2;
- }
-
- if (status & I2C_RXAK) {
- return -3;
- }
-
- return 0;
-}
-
-static int send_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out(®s->mdr, buf[wrcount], 0);
-
- if (wait_for_pin(&status)) {
- break;
- }
-
- if (status & I2C_RXAK) {
- break;
- }
-
- }
-
- return !(wrcount == len);
-}
-
-static int receive_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out(®s->mcr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in(®s->mdr);
-
- if (dummy) {
- dummy = 0;
- } else {
- rdcount++;
- }
-
-
- if (wait_for_pin(&status)) {
- return -4;
- }
- }
-
- mpc_reg_out(®s->mcr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in(®s->mdr);
-
- if (wait_for_pin(&status)) {
- return -5;
- }
-
- mpc_reg_out(®s->mcr, 0, I2C_TXAK);
-
- return 0;
-}
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
-
-#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
-#define FDR432(x) (u8) ((x & 0x1C) >> 2)
-/*
- * Reset any i2c devices that may have been interrupted during a system reset.
- * Normally this would be accomplished by clocking the line until SCL and SDA
- * are released and then sending a start condtiion (From an Atmel datasheet).
- * There is no direct access to the i2c pins so instead create start commands
- * through the i2c interface. Send a start command then delay for the SDA Hold
- * time, repeat this by disabling/enabling the bus a total of 9 times.
- */
-static void send_reset(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
- u32 delay;
- u8 fdr;
- int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- fdr = (u8)mpc_reg_in(®s->mfdr);
-
- delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
- scltap[FDR432(fdr)].tap2tap) + 3;
-
- for (i = 0; i < 9; i++) {
- mpc_reg_out(®s->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
- udelay(delay);
- mpc_reg_out(®s->mcr, 0, I2C_INIT_MASK);
- udelay(delay);
- }
-
- mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
-}
-#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
-
-/**************** I2C API ****************/
-
-void i2c_init(int speed, int saddr)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
-
- mpc_reg_out(®s->mcr, 0, 0);
- mpc_reg_out(®s->madr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out(®s->mfdr, mpc_get_fdr(speed), 0);
-
- /* Enable module
- */
- mpc_reg_out(®s->mcr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out(®s->msr, 0, I2C_IF);
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
- send_reset();
-#endif
- return;
-}
-
-static int mpc_get_fdr(int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->ipb_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed*scl) {
- if ((speed*scl - ipb) < bestmatch) {
- bestmatch = speed*scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb/scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- if (gd->have_console)
- printf("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe(uchar chip)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
-
- if (! do_address(chip, 0)) {
- mpc_reg_out(®s->mcr, 0, I2C_STA);
- udelay(500);
- break;
- }
-
- mpc_reg_out(®s->mcr, 0, I2C_STA);
- udelay(500);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out(®s->mcr, I2C_RSTA, I2C_RSTA);
- if (do_address(chip, 1)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(®s->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(®s->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(®s->mcr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Pierre AUBERT, Staubli Faverges, <p.aubert@staubli.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Init is derived from Linux code.
- */
-#include <common.h>
-
-#if defined(CONFIG_CMD_IDE)
-#include <mpc5xxx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-#ifdef CONFIG_IDE_RESET
-extern void init_ide_reset (void);
-#endif
-
-int ide_preinit (void)
-{
- long period, t0, t1, t2_8, t2_16, t4, ta;
- vu_long reg;
- struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
-
- reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG;
-#if defined(CONFIG_SYS_ATA_CS_ON_I2C2)
- /* ATA cs0/1 on i2c2 clk/io */
- reg = (reg & ~0x03000000ul) | 0x02000000ul;
-#elif defined(CONFIG_SYS_ATA_CS_ON_TIMER01)
- /* ATA cs0/1 on Timer 0/1 */
- reg = (reg & ~0x03000000ul) | 0x03000000ul;
-#else
- /* ATA cs0/1 on Local Plus cs4/5 */
- reg = (reg & ~0x03000000ul) | 0x01000000ul;
-#endif /* CONFIG_TOTAL5200 */
- *(vu_long *) MPC5XXX_GPS_PORT_CONFIG = reg;
-
- /* All sample codes do that... */
- *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0;
-
-#if defined(CONFIG_UC101)
- /* Configure and reset host */
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG =
- MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
- udelay (10);
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0;
-#else
- /* Configure and reset host */
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY |
- MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
- udelay (10);
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY;
-#endif
-
- /* Disable prefetch on Commbus */
- psdma->PtdCntrl |= 1;
-
- /* Init timings : we use PIO mode 0 timings */
- period = 1000000000 / gd->ipb_clk; /* period in ns */
-
- t0 = CALC_TIMING (600);
- t2_8 = CALC_TIMING (290);
- t2_16 = CALC_TIMING (165);
- reg = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8);
- *(vu_long *) MPC5XXX_ATA_PIO1 = reg;
-
- t4 = CALC_TIMING (30);
- t1 = CALC_TIMING (70);
- ta = CALC_TIMING (35);
- reg = (t4 << 24) | (t1 << 16) | (ta << 8);
-
- *(vu_long *) MPC5XXX_ATA_PIO2 = reg;
-
-#ifdef CONFIG_IDE_RESET
- init_ide_reset ();
-#endif /* CONFIG_IDE_RESET */
-
- return (0);
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu@denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the
- * Linux 2.6 source with the following copyright.
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS];
-
-static struct mpc5xxx_intr *intr;
-static struct mpc5xxx_sdma *sdma;
-
-static void mpc5xxx_ic_disable(unsigned int irq)
-{
- u32 val;
-
- if (irq == MPC5XXX_IRQ0) {
- val = in_be32(&intr->ctrl);
- val &= ~(1 << 11);
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_IRQ1) {
- BUG();
- } else if (irq <= MPC5XXX_IRQ3) {
- val = in_be32(&intr->ctrl);
- val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1)));
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
- val = in_be32(&intr->main_mask);
- val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE));
- out_be32(&intr->main_mask, val);
- } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
- val = in_be32(&sdma->IntMask);
- val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE);
- out_be32(&sdma->IntMask, val);
- } else {
- val = in_be32(&intr->per_mask);
- val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE));
- out_be32(&intr->per_mask, val);
- }
-}
-
-static void mpc5xxx_ic_enable(unsigned int irq)
-{
- u32 val;
-
- if (irq == MPC5XXX_IRQ0) {
- val = in_be32(&intr->ctrl);
- val |= 1 << 11;
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_IRQ1) {
- BUG();
- } else if (irq <= MPC5XXX_IRQ3) {
- val = in_be32(&intr->ctrl);
- val |= 1 << (10 - (irq - MPC5XXX_IRQ1));
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
- val = in_be32(&intr->main_mask);
- val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)));
- out_be32(&intr->main_mask, val);
- } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
- val = in_be32(&sdma->IntMask);
- val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
- out_be32(&sdma->IntMask, val);
- } else {
- val = in_be32(&intr->per_mask);
- val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)));
- out_be32(&intr->per_mask, val);
- }
-}
-
-static void mpc5xxx_ic_ack(unsigned int irq)
-{
- u32 val;
-
- /*
- * Only some irqs are reset here, others in interrupting hardware.
- */
-
- switch (irq) {
- case MPC5XXX_IRQ0:
- val = in_be32(&intr->ctrl);
- val |= 0x08000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_CCS_IRQ:
- val = in_be32(&intr->enc_status);
- val |= 0x00000400;
- out_be32(&intr->enc_status, val);
- break;
- case MPC5XXX_IRQ1:
- val = in_be32(&intr->ctrl);
- val |= 0x04000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_IRQ2:
- val = in_be32(&intr->ctrl);
- val |= 0x02000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_IRQ3:
- val = in_be32(&intr->ctrl);
- val |= 0x01000000;
- out_be32(&intr->ctrl, val);
- break;
- default:
- if (irq >= MPC5XXX_SDMA_IRQ_BASE
- && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) {
- out_be32(&sdma->IntPend,
- 1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
- }
- break;
- }
-}
-
-static void mpc5xxx_ic_disable_and_ack(unsigned int irq)
-{
- mpc5xxx_ic_disable(irq);
- mpc5xxx_ic_ack(irq);
-}
-
-static void mpc5xxx_ic_end(unsigned int irq)
-{
- mpc5xxx_ic_enable(irq);
-}
-
-void mpc5xxx_init_irq(void)
-{
- u32 intr_ctrl;
-
- /* Remap the necessary zones */
- intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
- sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA);
-
- /* Disable all interrupt sources. */
- out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
- out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
- out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
- out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
- intr_ctrl = in_be32(&intr->ctrl);
- intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
- 0x00ff0000 | /* IRQ 0-3 level sensitive low active */
- 0x00001000 | /* MEE master external enable */
- 0x00000000 | /* 0 means disable IRQ 0-3 */
- 0x00000001; /* CEb route critical normally */
- out_be32(&intr->ctrl, intr_ctrl);
-
- /* Zero a bunch of the priority settings. */
- out_be32(&intr->per_pri1, 0);
- out_be32(&intr->per_pri2, 0);
- out_be32(&intr->per_pri3, 0);
- out_be32(&intr->main_pri1, 0);
- out_be32(&intr->main_pri2, 0);
-}
-
-int mpc5xxx_get_irq(struct pt_regs *regs)
-{
- u32 status;
- int irq = -1;
-
- status = in_be32(&intr->enc_status);
-
- if (status & 0x00000400) { /* critical */
- irq = (status >> 8) & 0x3;
- if (irq == 2) /* high priority peripheral */
- goto peripheral;
- irq += MPC5XXX_CRIT_IRQ_BASE;
- } else if (status & 0x00200000) { /* main */
- irq = (status >> 16) & 0x1f;
- if (irq == 4) /* low priority peripheral */
- goto peripheral;
- irq += MPC5XXX_MAIN_IRQ_BASE;
- } else if (status & 0x20000000) { /* peripheral */
- peripheral:
- irq = (status >> 24) & 0x1f;
- if (irq == 0) { /* bestcomm */
- status = in_be32(&sdma->IntPend);
- irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1;
- } else
- irq += MPC5XXX_PERP_IRQ_BASE;
- }
-
- return irq;
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(ulong * decrementer_count)
-{
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- mpc5xxx_init_irq();
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- int irq, unmask = 1;
-
- irq = mpc5xxx_get_irq(regs);
-
- mpc5xxx_ic_disable_and_ack(irq);
-
- enable_interrupts();
-
- if (irq_handlers[irq].handler != NULL)
- (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
- else {
- printf("\nBogus External Interrupt IRQ %d\n", irq);
- /*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
- unmask = 0;
- }
-
- if (unmask)
- mpc5xxx_ic_end(irq);
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- mpc5xxx_ic_enable(irq);
-}
-
-void irq_free_handler(int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- mpc5xxx_ic_disable(irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- int irq, re_enable;
- u32 intr_ctrl;
- char *irq_config[] = { "level sensitive, active high",
- "edge sensitive, rising active edge",
- "edge sensitive, falling active edge",
- "level sensitive, active low"
- };
-
- re_enable = disable_interrupts();
-
- intr_ctrl = in_be32(&intr->ctrl);
- printf("Interrupt configuration:\n");
-
- for (irq = 0; irq <= 3; irq++) {
- printf("IRQ%d: %s\n", irq,
- irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]);
- }
-
- puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < NR_IRQS; irq++)
- if (irq_handlers[irq].handler != NULL)
- printf("%02d %08lx %08lx %ld\n", irq,
- (ulong) irq_handlers[irq].handler,
- (ulong) irq_handlers[irq].arg,
- irq_handlers[irq].count);
-
- if (re_enable)
- enable_interrupts();
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-/* BestComm/SmartComm microcode */
-extern int taskTable;
-
-void loadtask(int basetask, int tasks)
-{
- int *sram = (int *)MPC5XXX_SRAM;
- int *task_org = &taskTable;
- unsigned int start, offset, end;
- int i;
-
-#ifdef DEBUG
- printf("basetask = %d, tasks = %d\n", basetask, tasks);
- printf("task_org = 0x%08x\n", (unsigned int)task_org);
-#endif
-
- /* setup TaskBAR register */
- *(vu_long *)MPC5XXX_SDMA = MPC5XXX_SRAM;
-
- /* relocate task table entries */
- offset = (unsigned int)sram;
- for (i = basetask; i < basetask + tasks; i++) {
- sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
- sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
- sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
- sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
- sram[i * 8 + 4] = task_org[i * 8 + 4];
- sram[i * 8 + 5] = task_org[i * 8 + 5];
- sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
- sram[i * 8 + 7] = task_org[i * 8 + 7];
- }
-
- /* relocate task descriptors */
- start = (sram[basetask * 8] - (unsigned int)sram);
- end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int)sram);
-
-#ifdef DEBUG
- printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
- start /= 4;
- end /= 4;
- for (i = start; i <= end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate variables */
- start = (sram[basetask * 8 + 2] - (unsigned int)sram);
- end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 - (unsigned int)sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate function decriptors */
- start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int)sram);
- end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 - (unsigned int)sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- asm volatile ("sync");
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_PCI)
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <mpc5xxx.h>
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_MEMORY_SIZE (1024 * 1024 * 1024)
-
-/* PCIIWCR bit fields */
-#define IWCR_MEM (0 << 3)
-#define IWCR_IO (1 << 3)
-#define IWCR_READ (0 << 1)
-#define IWCR_READLINE (1 << 1)
-#define IWCR_READMULT (2 << 1)
-#define IWCR_EN (1 << 0)
-
-static int mpc5200_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32* value)
-{
- *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
- eieio();
- udelay(10);
-#if (defined CONFIG_PF5200 || defined CONFIG_CPCI5200)
- if (dev & 0x00ff0000) {
- u32 val;
- val = in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+2));
- udelay(10);
- val = val << 16;
- val |= in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+0));
- *value = val;
- } else {
- *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
- }
- udelay(10);
-#else
- *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
-#endif
- eieio();
- *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
- udelay(10);
- return 0;
-}
-
-static int mpc5200_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 value)
-{
- *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
- eieio();
- udelay(10);
- out_le32((volatile u32 *)CONFIG_PCI_IO_PHYS, value);
- eieio();
- *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
- udelay(10);
- return 0;
-}
-
-void pci_mpc5xxx_init (struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System space */
- pci_set_region(hose->regions + 0,
- CONFIG_PCI_MEMORY_BUS,
- CONFIG_PCI_MEMORY_PHYS,
- CONFIG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_PCI_MEM_BUS,
- CONFIG_PCI_MEM_PHYS,
- CONFIG_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI IO space */
- pci_set_region(hose->regions + 2,
- CONFIG_PCI_IO_BUS,
- CONFIG_PCI_IO_PHYS,
- CONFIG_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose(hose);
-
- /* GPIO Multiplexing - enable PCI */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~(1 << 15);
-
- /* Set host bridge as pci master and enable memory decoding */
- *(vu_long *)MPC5XXX_PCI_CMD |=
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-
- /* Set maximum latency timer */
- *(vu_long *)MPC5XXX_PCI_CFG |= (0xf800);
-
- /* Set cache line size */
- *(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) |
- (CONFIG_SYS_CACHELINE_SIZE / 4);
-
- /* Map MBAR to PCI space */
- *(vu_long *)MPC5XXX_PCI_BAR0 = CONFIG_SYS_MBAR;
- *(vu_long *)MPC5XXX_PCI_TBATR0 = CONFIG_SYS_MBAR | 1;
-
- /* Map RAM to PCI space */
- *(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
- *(vu_long *)MPC5XXX_PCI_TBATR1 = CONFIG_PCI_MEMORY_PHYS | 1;
-
- /* Park XLB on PCI */
- *(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~((7 << 8) | (3 << 5));
- *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (3 << 8) | (3 << 5);
-
- /* Disable interrupts from PCI controller */
- *(vu_long *)MPC5XXX_PCI_GSCR &= ~(7 << 12);
- *(vu_long *)MPC5XXX_PCI_ICR &= ~(7 << 24);
-
- /* Set PCI retry counter to 0 = infinite retry. */
- /* The default of 255 is too short for slow devices. */
- *(vu_long *)MPC5XXX_PCI_ICR &= 0xFFFFFF00;
-
- /* Disable initiator windows */
- *(vu_long *)MPC5XXX_PCI_IWCR = 0;
-
- /* Map PCI memory to physical space */
- *(vu_long *)MPC5XXX_PCI_IW0BTAR = CONFIG_PCI_MEM_PHYS |
- (((CONFIG_PCI_MEM_SIZE - 1) >> 8) & 0x00ff0000) |
- (CONFIG_PCI_MEM_BUS >> 16);
- *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_MEM | IWCR_READ | IWCR_EN) << 24;
-
- /* Map PCI I/O to physical space */
- *(vu_long *)MPC5XXX_PCI_IW1BTAR = CONFIG_PCI_IO_PHYS |
- (((CONFIG_PCI_IO_SIZE - 1) >> 8) & 0x00ff0000) |
- (CONFIG_PCI_IO_BUS >> 16);
- *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_IO | IWCR_READ | IWCR_EN) << 16;
-
- /* Reset the PCI bus */
- *(vu_long *)MPC5XXX_PCI_GSCR |= 1;
- udelay(1000);
- *(vu_long *)MPC5XXX_PCI_GSCR &= ~1;
- udelay(1000);
-
- pci_set_ops(hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- mpc5200_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- mpc5200_write_config_dword);
-
- udelay(1000);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
- * Linux/PPC sources (m8260_tty.c had no copyright info in it).
- *
- * Martin Krause, 8 Jun 2006
- * Added CONFIG_SERIAL_MULTI support
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-#if defined (CONFIG_SERIAL_MULTI)
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PSC_CONSOLE)
-
-#if CONFIG_PSC_CONSOLE == 1
-#define PSC_BASE MPC5XXX_PSC1
-#elif CONFIG_PSC_CONSOLE == 2
-#define PSC_BASE MPC5XXX_PSC2
-#elif CONFIG_PSC_CONSOLE == 3
-#define PSC_BASE MPC5XXX_PSC3
-#elif CONFIG_PSC_CONSOLE == 4
-#define PSC_BASE MPC5XXX_PSC4
-#elif CONFIG_PSC_CONSOLE == 5
-#define PSC_BASE MPC5XXX_PSC5
-#elif CONFIG_PSC_CONSOLE == 6
-#define PSC_BASE MPC5XXX_PSC6
-#else
-#error CONFIG_PSC_CONSOLE must be in 1 ... 6
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI) && !defined(CONFIG_PSC_CONSOLE2)
-#error you must define CONFIG_PSC_CONSOLE2 if CONFIG_SERIAL_MULTI is set
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-#if CONFIG_PSC_CONSOLE2 == 1
-#define PSC_BASE2 MPC5XXX_PSC1
-#elif CONFIG_PSC_CONSOLE2 == 2
-#define PSC_BASE2 MPC5XXX_PSC2
-#elif CONFIG_PSC_CONSOLE2 == 3
-#define PSC_BASE2 MPC5XXX_PSC3
-#elif CONFIG_PSC_CONSOLE2 == 4
-#define PSC_BASE2 MPC5XXX_PSC4
-#elif CONFIG_PSC_CONSOLE2 == 5
-#define PSC_BASE2 MPC5XXX_PSC5
-#elif CONFIG_PSC_CONSOLE2 == 6
-#define PSC_BASE2 MPC5XXX_PSC6
-#else
-#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6
-#endif
-#endif /* CONFIG_SERIAL_MULTI */
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_init_dev (unsigned long dev_base)
-#else
-int serial_init (void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- unsigned long baseclk;
- int div;
-
- /* reset PSC */
- psc->command = PSC_SEL_MODE_REG_1;
-
- /* select clock sources */
- psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
-
- /* switch to UART mode */
- psc->sicr = 0;
-
- /* configure parity, bit length and so on */
- psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
- psc->mode = PSC_MODE_ONE_STOP;
-
- /* set up UART divisor */
- div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
- psc->ctur = (div >> 8) & 0xff;
- psc->ctlr = div & 0xff;
-
- /* disable all interrupts */
- psc->psc_imr = 0;
-
- /* reset and enable Rx/Tx */
- psc->command = PSC_RST_RX;
- psc->command = PSC_RST_TX;
- psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
-
- return (0);
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_putc_dev (unsigned long dev_base, const char c)
-#else
-void serial_putc(const char c)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- if (c == '\n')
-#if defined(CONFIG_SERIAL_MULTI)
- serial_putc_dev (dev_base, '\r');
-#else
- serial_putc('\r');
-#endif
-
- /* Wait for last character to go. */
- while (!(psc->psc_status & PSC_SR_TXEMP))
- ;
-
- psc->psc_buffer_8 = c;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_putc_raw_dev(unsigned long dev_base, const char c)
-#else
-void serial_putc_raw(const char c)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- /* Wait for last character to go. */
- while (!(psc->psc_status & PSC_SR_TXEMP))
- ;
-
- psc->psc_buffer_8 = c;
-}
-
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_puts_dev (unsigned long dev_base, const char *s)
-#else
-void serial_puts (const char *s)
-#endif
-{
- while (*s) {
-#if defined(CONFIG_SERIAL_MULTI)
- serial_putc_dev (dev_base, *s++);
-#else
- serial_putc (*s++);
-#endif
- }
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_getc_dev (unsigned long dev_base)
-#else
-int serial_getc(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- /* Wait for a character to arrive. */
- while (!(psc->psc_status & PSC_SR_RXRDY))
- ;
-
- return psc->psc_buffer_8;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_tstc_dev (unsigned long dev_base)
-#else
-int serial_tstc(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- return (psc->psc_status & PSC_SR_RXRDY);
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_setbrg_dev (unsigned long dev_base)
-#else
-void serial_setbrg(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- unsigned long baseclk, div;
-
- baseclk = (gd->ipb_clk + 16) / 32;
-
- /* set up UART divisor */
- div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
- psc->ctur = (div >> 8) & 0xFF;
- psc->ctlr = div & 0xff;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_setrts_dev (unsigned long dev_base, int s)
-#else
-void serial_setrts(int s)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- if (s) {
- /* Assert RTS (become LOW) */
- psc->op1 = 0x1;
- }
- else {
- /* Negate RTS (become HIGH) */
- psc->op0 = 0x1;
- }
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_getcts_dev (unsigned long dev_base)
-#else
-int serial_getcts(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- return (psc->ip & 0x1) ? 0 : 1;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial0_init(void)
-{
- return (serial_init_dev(PSC_BASE));
-}
-
-int serial1_init(void)
-{
- return (serial_init_dev(PSC_BASE2));
-}
-void serial0_setbrg (void)
-{
- serial_setbrg_dev(PSC_BASE);
-}
-void serial1_setbrg (void)
-{
- serial_setbrg_dev(PSC_BASE2);
-}
-
-void serial0_putc(const char c)
-{
- serial_putc_dev(PSC_BASE,c);
-}
-
-void serial1_putc(const char c)
-{
- serial_putc_dev(PSC_BASE2, c);
-}
-void serial0_puts(const char *s)
-{
- serial_puts_dev(PSC_BASE, s);
-}
-
-void serial1_puts(const char *s)
-{
- serial_puts_dev(PSC_BASE2, s);
-}
-
-int serial0_getc(void)
-{
- return(serial_getc_dev(PSC_BASE));
-}
-
-int serial1_getc(void)
-{
- return(serial_getc_dev(PSC_BASE2));
-}
-int serial0_tstc(void)
-{
- return (serial_tstc_dev(PSC_BASE));
-}
-
-int serial1_tstc(void)
-{
- return (serial_tstc_dev(PSC_BASE2));
-}
-
-struct serial_device serial0_device =
-{
- "serial0",
- "UART0",
- serial0_init,
- serial0_setbrg,
- serial0_getc,
- serial0_tstc,
- serial0_putc,
- serial0_puts,
-};
-
-struct serial_device serial1_device =
-{
- "serial1",
- "UART1",
- serial1_init,
- serial1_setbrg,
- serial1_getc,
- serial1_tstc,
- serial1_putc,
- serial1_puts,
-};
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* CONFIG_PSC_CONSOLE */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* Bus-to-Core Multipliers */
-
-static int bus2core[] = {
- 3, 2, 2, 2, 4, 4, 5, 9,
- 6, 11, 8, 10, 3, 12, 7, 0,
- 6, 5, 13, 2, 14, 4, 15, 9,
- 0, 11, 8, 10, 16, 12, 7, 0
-};
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- ulong val, vco;
-
-#if !defined(CONFIG_SYS_MPC5XXX_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC5XXX_CLKIN
-#endif
-
- val = *(vu_long *)MPC5XXX_CDM_PORCFG;
- if (val & (1 << 6)) {
- vco = CONFIG_SYS_MPC5XXX_CLKIN * 12;
- } else {
- vco = CONFIG_SYS_MPC5XXX_CLKIN * 16;
- }
- if (val & (1 << 5)) {
- gd->bus_clk = vco / 8;
- } else {
- gd->bus_clk = vco / 4;
- }
- gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 2;
-
- val = *(vu_long *)MPC5XXX_CDM_CFG;
- if (val & (1 << 8)) {
- gd->ipb_clk = gd->bus_clk / 2;
- } else {
- gd->ipb_clk = gd->bus_clk;
- }
- switch (val & 3) {
- case 0: gd->pci_clk = gd->ipb_clk; break;
- case 1: gd->pci_clk = gd->ipb_clk / 2; break;
- default: gd->pci_clk = gd->bus_clk / 4; break;
- }
-
- return (0);
-}
-
-int prt_mpc5xxx_clks (void)
-{
- char buf1[32], buf2[32], buf3[32];
-
- printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
- strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->ipb_clk),
- strmhz(buf3, gd->pci_clk)
- );
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC5xxx CPUs
- */
-#include <config.h>
-#include <mpc5xxx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
- mfmsr r5 /* save msr contents */
-
- /* Move CSBoot and adjust instruction pointer */
- /*--------------------------------------------------------------*/
-
-#if defined(CONFIG_SYS_LOWBOOT)
-# if defined(CONFIG_SYS_RAMBOOT)
-# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
-# endif /* CONFIG_SYS_RAMBOOT */
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4(r4) /* CS0 start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x8(r4) /* CS0 stop */
- lis r3, 0x02010000@h
- ori r3, r3, 0x02010000@l
- stw r3, 0x54(r4) /* CS0 and Boot enable */
-
- lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
- ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
- mtlr r3
- blr
-
-lowboot_reentry:
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4c(r4) /* Boot start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x50(r4) /* Boot stop */
- lis r3, 0x02000001@h
- ori r3, r3, 0x02000001@l
- stw r3, 0x54(r4) /* Boot enable, CS0 disable */
-#endif /* CONFIG_SYS_LOWBOOT */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- rlwinm r3, r3, 16, 16, 31
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC5xxx processor core */
- /*--------------------------------------------------------------*/
-
- bl init_5xxx_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the MPC5xxx processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_5xx_core
-init_5xxx_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_DCE
- lis r4, 0
- ori r4, r4, HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3, SVR
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
- switch( regs->msr & 0x000F0000)
- {
- case (0x80000000>>12) :
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13) :
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14) :
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15) :
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/ppc/cpu/mpc5xxx/start.o (.text)
- arch/ppc/cpu/mpc5xxx/traps.o (.text)
- lib/crc32.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
-
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc5xxx/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-
-#include <mpc5xxx.h>
-
-int usb_cpu_init(void)
-{
- /* Set the USB Clock */
- *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
-
-#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
- /* remove all PSC3 USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
-#else
- /* remove all USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-#endif
- /* Activate USB port */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
-
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the MPC5200.
- *
- * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#include <mpc5xxx.h>
-
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-#define ohci_cpu_to_le16(x) (x)
-#define ohci_cpu_to_le32(x) (x)
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- urb_priv_t * purb = &urb_priv;
-
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (®s->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (®s->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (®s->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (®s->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv;
- int i, size = 0;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* if we have an unfinished URB from previous transaction let's
- * fail and scream as quickly as possible so as not to corrupt
- * further communication */
- if (!urb_finished) {
- err("sohci_submit_job: URB NOT FINISHED");
- return -1;
- }
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb_finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- }
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv = &urb_priv;
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return ohci_cpu_to_le16 (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->state = ED_OPER;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = ohci_cpu_to_le32 (info);
- td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
- if (data)
- td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
-
- tdINFO = ohci_cpu_to_le32 (td->hwINFO);
- tdBE = ohci_cpu_to_le32 (td->hwBE);
- tdCBP = ohci_cpu_to_le32 (td->hwCBP);
-
-
- if (!(usb_pipecontrol(lurb_priv->pipe) &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
- (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
- }
- td_list->hwNextTD = 0;
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- lurb_priv = &urb_priv;
- tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
-
- ed = td_list->ed;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
- if ((ed->state & (ED_OPER | ED_UNLINK))
- && (lurb_priv->state != URB_DEL)) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- urb_finished = 1;
- }
- }
-
- if (ed->state != ED_NEW) {
- edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
- edTailP = ohci_cpu_to_le32 (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#endif
- if (usb_pipeint(pipe)) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipebulk(pipe))
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb_finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- stat = USB_ST_CRC_ERR;
- urb_finished = 1;
- break;
- }
- }
-#if 0
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-#endif
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#endif
-
- /* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
- ohci->slot_name,
- readl (&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
-
- ints = OHCI_INTR_WDH;
-
- } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
-
- } else if ((ints &= readl (®s->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- writel (OHCI_INTR_WDH, ®s->intrdisable);
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, ®s->intrenable);
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, ®s->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, ®s->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, ®s->intrenable);
- stat = 0xff;
- }
-
- writel (ints, ®s->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
-
- /* Set the USB Clock */
- *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
-
-#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
- /* remove all PSC3 USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
-#else
- /* remove all USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-#endif
- /* Activate USB port */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
-
- memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)MPC5XXX_USB;
-
- gohci.flags = 0;
- gohci.slot_name = "mpc5200";
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- return -1;
- }
-
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#endif
- ohci_inited = 1;
- urb_finished = 1;
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
- return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- __u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
- } roothub;
-} __attribute__((aligned(32)));
-
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct
-{
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- int state;
- unsigned long pipe;
- int actual_length;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma;*/
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++)
- {
- if (ptd[i].usb_dev == NULL)
- {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = io.o fec_dma_tasks.o
-COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
- interrupts.o loadtask.o speed.o \
- traps.o uart.o pci.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc8220/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC8220 CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8220.h>
-#include <netdev.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- printf (CPU_ID_STR);
-
- printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
-
- printf (" at %s MHz\n", strmhz (buf, clock));
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR;
- ulong msr;
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* Charge the watchdog timer */
- gptmr->Prescl = 10;
- gptmr->Count = 1;
-
- gptmr->Mode = GPT_TMS_SGPIO;
-
- gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE;
-
- return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_MPC8220_FEC)
- mpc8220_fec_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
- volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
- volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* Clear all port configuration */
- portcfg->pcfg0 = 0;
- portcfg->pcfg1 = 0;
- portcfg->pcfg2 = 0;
- portcfg->pcfg3 = 0;
- portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
- portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
-
- /*
- * Flexbus Controller: configure chip selects and enable them
- */
-#if defined (CONFIG_SYS_CS0_BASE)
- flexbus->csar0 = CONFIG_SYS_CS0_BASE;
-
-/* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CONFIG_SYS_CS0_CTRL)
- flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
-#endif
- flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS1_BASE)
- flexbus->csar1 = CONFIG_SYS_CS1_BASE;
- flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
- flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS2_BASE)
- flexbus->csar2 = CONFIG_SYS_CS2_BASE;
- flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
- flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS3_BASE)
- flexbus->csar3 = CONFIG_SYS_CS3_BASE;
- flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
- flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS4_BASE)
- flexbus->csar4 = CONFIG_SYS_CS4_BASE;
- flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
- flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS5_BASE)
- flexbus->csar5 = CONFIG_SYS_CS5_BASE;
- flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
- flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-
- /* This section of the code cannot place in cpu_init_r(),
- it will cause the system to hang */
- /* enable timebase */
- xlbarb->addrTenTimeOut = 0x1000;
- xlbarb->dataTenTimeOut = 0x1000;
- xlbarb->busActTimeOut = 0x2000;
-
- xlbarb->config = 0x00002000;
-
- /* Master Priority Enable */
- xlbarb->mastPriority = 0;
- xlbarb->mastPriEn = 0xff;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- /* this may belongs to disable interrupt section */
- /* mask all interrupts */
- *(vu_long *) 0xf0000700 = 0xfffffc00;
- *(vu_long *) 0xf0000714 |= 0x0001ffff;
- *(vu_long *) 0xf0000710 &= ~0x00000f00;
-
- /* route critical ints to normal ints */
- *(vu_long *) 0xf0000710 |= 0x00000001;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
- /* load FEC microcode */
- loadtask (0, 2);
-#endif
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- *
- * MPC8220 dma header file
- */
-
-#ifndef __MPC8220_DMA_H
-#define __MPC8220_DMA_H
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Task number assignment */
-#define FEC_RECV_TASK_NO 0
-#define FEC_XMIT_TASK_NO 1
-
-/*---------------------------------------------------------------------
- * Stuff for Ethernet Tx/Rx tasks
- *---------------------------------------------------------------------
- */
-
-/* Layout of Ethernet controller Parameter SRAM area:
- * ----------------------------------------------------------------
- * 0x00: TBD_BASE, base address of TX BD ring
- * 0x04: TBD_NEXT, address of next TX BD to be processed
- * 0x08: RBD_BASE, base address of RX BD ring
- * 0x0C: RBD_NEXT, address of next RX BD to be processed
- * ---------------------------------------------------------------
- * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
- */
-
-/* base address of SRAM area to store parameters used by Ethernet tasks */
-#define FEC_PARAM_BASE (MMAP_SRAM + 0x5b00)
-
-/* base address of SRAM area for buffer descriptors */
-#define FEC_BD_BASE (MMAP_SRAM + 0x5b20)
-
-/*---------------------------------------------------------------------
- * common shortcuts used by driver C code
- *---------------------------------------------------------------------
- */
-
-/* Disable SmartDMA task */
-#define DMA_TASK_DISABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \
- *tcr = (*tcr) & (~0x8000); \
-}
-
-/* Enable SmartDMA task */
-#define DMA_TASK_ENABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\
- *tcr = (*tcr) | 0x8000; \
-}
-
-/* Clear interrupt pending bits */
-#define DMA_CLEAR_IEVENT(tasknum) \
-{ \
- struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA; \
- dma->IntPend = (1 << tasknum); \
-}
-
-#endif /* __MPC8220_DMA_H */
+++ /dev/null
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-DESCRIPTION
-Read Dram spd and base on its information to calculate the memory size,
-characteristics to initialize the dram on MPC8220
-*/
-
-#include <common.h>
-#include <mpc8220.h>
-#include "i2cCore.h"
-#include "dramSetup.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
-#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
-#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
-
-int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
-{
- int i;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- return (ERROR);
-}
-
-int spd_clear (volatile i2c8220_t * pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-int spd_stop (volatile i2c8220_t * pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-int readSpdData (u8 * spdData)
-{
- volatile i2c8220_t *pi2cReg;
- volatile pcfg8220_t *pcfg;
- u8 slvAdr = DRAM_SPD;
- u8 Tmp;
- int Length = SPD_SIZE;
- int i = 0;
-
- /* Enable Port Configuration for SDA and SDL signals */
- pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
- __asm__ ("sync");
- pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
- __asm__ ("sync");
-
- /* Points the structure to I2c mbar memory offset */
- pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
-
-
- /* Clear FDR, ADR, SR and CR reg */
- pi2cReg->adr = 0;
- pi2cReg->fdr = 0;
- pi2cReg->cr = 0;
- pi2cReg->sr = 0;
-
- /* Set for fix XLB Bus Frequency */
- switch (gd->bus_clk) {
- case 60000000:
- pi2cReg->fdr = 0x15;
- break;
- case 70000000:
- pi2cReg->fdr = 0x16;
- break;
- case 80000000:
- pi2cReg->fdr = 0x3a;
- break;
- case 90000000:
- pi2cReg->fdr = 0x17;
- break;
- case 100000000:
- pi2cReg->fdr = 0x3b;
- break;
- case 110000000:
- pi2cReg->fdr = 0x18;
- break;
- case 120000000:
- pi2cReg->fdr = 0x19;
- break;
- case 130000000:
- pi2cReg->fdr = 0x1a;
- break;
- }
-
- pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
-
- pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
- if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
- pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
- return ERROR;
-
-
- /* Write slave address */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Issue the offset to start */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = 0; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Set repeat start */
- pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr | 1; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2cReg->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
- return spd_stop (pi2cReg);
- }
- i++;
- Length--;
- spdData++;
- }
-
- /* Stop the service */
- spd_stop (pi2cReg);
-
- return OK;
-}
-
-int getBankInfo (int bank, draminfo_t * pBank)
-{
- int status;
- int checksum;
- int count;
- u8 spdData[SPD_SIZE];
-
-
- if (bank > 2 || pBank == 0) {
- /* illegal values */
- return (-42);
- }
-
- status = readSpdData (&spdData[0]);
- if (status < 0)
- return (-1);
-
- /* check the checksum */
- for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
- checksum += spdData[count];
-
- checksum = checksum - ((checksum / 256) * 256);
-
- if (checksum != spdData[LOC_CHECKSUM])
- return (-2);
-
- /* Get the memory type */
- if (!
- ((spdData[LOC_TYPE] == TYPE_DDR)
- || (spdData[LOC_TYPE] == TYPE_SDR)))
- /* not one of the types we support */
- return (-3);
-
- pBank->type = spdData[LOC_TYPE];
-
- /* Set logical banks */
- pBank->banks = spdData[LOC_LOGICAL_BANKS];
-
- /* Check that we have enough physical banks to cover the bank we are
- * figuring out. Odd-numbered banks correspond to the second bank
- * on the device.
- */
- if (bank & 1) {
- /* Second bank of a "device" */
- if (spdData[LOC_PHYS_BANKS] < 2)
- /* this bank doesn't exist on the "device" */
- return (-4);
-
- if (spdData[LOC_ROWS] & 0xf0)
- /* Two asymmetric banks */
- pBank->rows = spdData[LOC_ROWS] >> 4;
- else
- pBank->rows = spdData[LOC_ROWS];
-
- if (spdData[LOC_COLS] & 0xf0)
- /* Two asymmetric banks */
- pBank->cols = spdData[LOC_COLS] >> 4;
- else
- pBank->cols = spdData[LOC_COLS];
- } else {
- /* First bank of a "device" */
- pBank->rows = spdData[LOC_ROWS];
- pBank->cols = spdData[LOC_COLS];
- }
-
- pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
- pBank->bursts = spdData[LOC_BURSTS];
- pBank->CAS = spdData[LOC_CAS];
- pBank->CS = spdData[LOC_CS];
- pBank->WE = spdData[LOC_WE];
- pBank->Trp = spdData[LOC_Trp];
- pBank->Trcd = spdData[LOC_Trcd];
- pBank->buffered = spdData[LOC_Buffered] & 1;
- pBank->refresh = spdData[LOC_REFRESH];
-
- return (0);
-}
-
-
-/* checkMuxSetting -- given a row/column device geometry, return a mask
- * of the valid DRAM controller addr_mux settings for
- * that geometry.
- *
- * Arguments: u8 rows: number of row addresses in this device
- * u8 columns: number of column addresses in this device
- *
- * Returns: a mask of the allowed addr_mux settings for this
- * geometry. Each bit in the mask represents a
- * possible addr_mux settings (for example, the
- * (1<<2) bit in the mask represents the 0b10 setting)/
- *
- */
-u8 checkMuxSetting (u8 rows, u8 columns)
-{
- muxdesc_t *pIdx, *pMux;
- u8 mask;
- int lrows, lcolumns;
- u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
-
- /* Setup MuxDescriptor in SRAM space */
- /* MUXDESC AddressRuns [] = {
- { 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
- { 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
- { 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
- { 0xff } / list terminator /
- }; */
-
- pIdx = (muxdesc_t *) & mux[0];
-
- /* Check rows x columns against each possible address mux setting */
- for (pMux = pIdx, mask = 0;; pMux++) {
- lrows = rows;
- lcolumns = columns;
-
- if (pMux->MuxValue == 0xff)
- break; /* end of list */
-
- /* For a given mux setting, since we want all the memory in a
- * device to be contiguous, we want the device "use up" the
- * address lines such that there are no extra column or row
- * address lines on the device.
- */
-
- lcolumns -= pMux->Columns;
- if (lcolumns < 0)
- /* Not enough columns to get to the rows */
- continue;
-
- lrows -= pMux->Rows;
- if (lrows > 0)
- /* we have extra rows left -- can't do that! */
- continue;
-
- /* At this point, we either have to have used up all the
- * rows or we have to have no columns left.
- */
-
- if (lcolumns != 0 && lrows != 0)
- /* rows AND columns are left. Bad! */
- continue;
-
- lcolumns -= pMux->MoreColumns;
-
- if (lcolumns <= 0)
- mask |= (1 << pMux->MuxValue);
- }
-
- return (mask);
-}
-
-
-u32 dramSetup (void)
-{
- draminfo_t DramInfo[TOTAL_BANK];
- draminfo_t *pDramInfo;
- u32 size, temp, cfg_value, mode_value, refresh;
- u8 *ptr;
- u8 bursts, Trp, Trcd, type, buffered;
- u8 muxmask, rows, columns;
- int count, banknum;
- u32 *prefresh, *pIdx;
- u32 refrate[8] = { 15625, 3900, 7800, 31300,
- 62500, 125000, 0xffffffff, 0xffffffff
- };
- volatile sysconf8220_t *sysconf;
- volatile memctl8220_t *memctl;
-
- sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
- memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
-
- /* Set everything in the descriptions to zero */
- ptr = (u8 *) & DramInfo[0];
- for (count = 0; count < sizeof (DramInfo); count++)
- *ptr++ = 0;
-
- for (banknum = 0; banknum < TOTAL_BANK; banknum++)
- sysconf->cscfg[banknum];
-
- /* Descriptions of row/column address muxing for various
- * addr_mux settings.
- */
-
- pIdx = prefresh = (u32 *) & refrate[0];
-
- /* Get all the info for all three logical banks */
- bursts = 0xff;
- Trp = 0;
- Trcd = 0;
- type = 0;
- buffered = 0xff;
- refresh = 0xffffffff;
- muxmask = 0xff;
-
- /* Two bank, CS0 and CS1 */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- pDramInfo->ordinal = banknum; /* initial sorting */
- if (getBankInfo (banknum, pDramInfo) < 0)
- continue;
-
- /* get cumulative parameters of all three banks */
- if (type && pDramInfo->type != type)
- return 0;
-
- type = pDramInfo->type;
- rows = pDramInfo->rows;
- columns = pDramInfo->cols;
-
- /* This chip only supports 13 DRAM memory lines, but some devices
- * have 14 rows. To deal with this, ignore the 14th address line
- * by limiting the number of rows (and columns) to 13. This will
- * mean that for 14-row devices we will only be able to use
- * half of the memory, but it's better than nothing.
- */
- if (rows > 13)
- rows = 13;
- if (columns > 13)
- columns = 13;
-
- pDramInfo->size =
- ((1 << (rows + columns)) * pDramInfo->width);
- pDramInfo->size *= pDramInfo->banks;
- pDramInfo->size >>= 3;
-
- /* figure out which addr_mux configurations will support this device */
- muxmask &= checkMuxSetting (rows, columns);
- if (muxmask == 0)
- return 0;
-
- buffered = pDramInfo->buffered;
- bursts &= pDramInfo->bursts; /* union of all bursts */
- if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
- Trp = pDramInfo->Trp;
-
- if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
- Trcd = pDramInfo->Trcd;
-
- prefresh = pIdx;
- /* worst case (shortest) Refresh period */
- if (refresh > prefresh[pDramInfo->refresh & 7])
- refresh = prefresh[pDramInfo->refresh & 7];
-
- } /* for loop */
-
-
- /* We only allow a burst length of 8! */
- if (!(bursts & 8))
- bursts = 8;
-
- /* Sort the devices. In order to get each chip select region
- * aligned properly, put the biggest device at the lowest address.
- * A simple bubble sort will do the trick.
- */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (pDramInfo->size < DramInfo[i].size &&
- pDramInfo->ordinal < DramInfo[i].ordinal) {
- /* If the current bank is smaller, but if the ordinal is also
- * smaller, swap the ordinals
- */
- u8 temp8;
-
- temp8 = DramInfo[i].ordinal;
- DramInfo[i].ordinal = pDramInfo->ordinal;
- pDramInfo->ordinal = temp8;
- }
- }
- }
-
-
- /* Now figure out the base address for each bank. While
- * we're at it, figure out how much memory there is.
- *
- */
- size = 0;
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (DramInfo[i].ordinal == banknum
- && DramInfo[i].size != 0) {
- DramInfo[i].base = size;
- size += DramInfo[i].size;
- }
- }
- }
-
- /* Set up the Drive Strength register */
- sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
-
- /* ********************** Cfg 1 ************************* */
-
- /* Set the single read to read/write/precharge delay */
- cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the single write to read/write/precharge delay.
- * This may or may not be correct. The controller spec
- * says "tWR", but "tWR" does not appear in the SPD. It
- * always seems to be 15nsec for the class of device we're
- * using, which turns out to be 2 clock cycles at 133MHz,
- * so that's what we're going to use.
- *
- * HOWEVER, because of a bug in the controller, for DDR
- * we need to set this to be the same as the value
- * calculated for bwt2rwp.
- */
- cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
-
- /* Set the Read CAS latency. We're going to use a CL of
- * 2.5 for DDR and 2 SDR.
- */
- cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
-
-
- /* Set the Active to Read/Write delay. This depends
- * on Trcd which is reported as nanoseconds times 4.
- * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, with a minimum value of 2 */
- temp = ((temp + 999) / 1000) - 1;
- if (temp < 2)
- temp = 2;
-
- cfg_value |= CFG1_ACT2WR (temp);
-
- /* Set the precharge to active delay. This depends
- * on Trp which is reported as nanoseconds times 4.
- * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trp * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, then subtract 1, with a
- * minumum value of 1 and a maximum value of 7.
- */
- temp = (((temp + 999) / 1000) - 1) & 7;
- if (temp < 1)
- temp = 1;
-
- cfg_value |= CFG1_PRE2ACT (temp);
-
- /* Set refresh to active delay. This depends
- * on Trfc which is not reported in the SPD.
- * We'll use a nominal value of 75nsec which is
- * what the controller spec uses.
- */
- temp = (75 * (gd->bus_clk / 1000000));
- /* account for nanoseconds and round up, then subtract 1 */
- cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
-
- /* Set the write latency, using the values given in the controller spec */
- cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
- memctl->cfg1 = cfg_value; /* cfg 1 */
- asm volatile ("sync");
-
-
- /* ********************** Cfg 2 ************************* */
-
- /* Set the burst read to read/precharge delay */
- cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
-
- /* Set the burst write to read/precharge delay. Semi-magic numbers
- * based on the controller spec recommendations, assuming tWR is
- * two clock cycles.
- */
- cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
-
- /* Set the Burst read to write delay. Semi-magic numbers
- * based on the DRAM controller documentation.
- */
- cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the burst length -- must be 8!! Well, 7, actually, becuase
- * it's burst lenght minus 1.
- */
- cfg_value |= CFG2_BURSTLEN (7);
- memctl->cfg2 = cfg_value; /* cfg 2 */
- asm volatile ("sync");
-
-
- /* ********************** mode ************************* */
-
- /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
- * disable automatic refresh.
- */
- cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
- ((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
-
- /* Set the address mux based on whichever setting(s) is/are common
- * to all the devices we have. If there is more than one, choose
- * one arbitrarily.
- */
- if (muxmask & 0x4)
- cfg_value |= CTL_ADDRMUX (2);
- else if (muxmask & 0x2)
- cfg_value |= CTL_ADDRMUX (1);
- else
- cfg_value |= CTL_ADDRMUX (0);
-
- /* Set the refresh interval. */
- temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
- cfg_value |= CTL_REFRESH_INTERVAL (temp);
-
- /* Set buffered/non-buffered memory */
- if (buffered)
- cfg_value |= CTL_BUFFERED;
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- if (type == TYPE_DDR) {
- /* issue precharge all */
- temp = cfg_value | CTL_PRECHARGE_CMD;
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
- }
-
-
- /* Set up mode value for CAS latency */
-#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
-#else
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
-#endif
- asm volatile ("sync");
-
- /* Write Extended Mode - enable DLL */
- if (type == TYPE_DDR) {
- temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
- MODE_X_DS_NORMAL | MODE_CMD;
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Write Mode - reset DLL, set CAS latency */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
- }
-
- /* Program the chip selects. */
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- if (DramInfo[banknum].size != 0) {
- u32 mask;
- int i;
-
- for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
- if (DramInfo[banknum].size & mask)
- break;
- }
- temp = (DramInfo[banknum].base & 0xfff00000) | (i -
- 1);
-
- sysconf->cscfg[banknum] = temp;
- asm volatile ("sync");
- }
- }
-
- /* Wait for DLL lock */
- udelay (200);
-
- temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- /* Write Mode - DLL normal */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Enable refresh, enable DQS's (if DDR), and lock the control register */
- cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
- cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
-
- if (type == TYPE_DDR)
- cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- return size;
-}
+++ /dev/null
-/*
- * dramSetup.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCdramsetuph
-#define __INCdramsetuph
-#ifndef __ASSEMBLY__
-/* Where various things are in the SPD */
-#define LOC_TYPE 2
-#define LOC_CHECKSUM 63
-#define LOC_PHYS_BANKS 5
-#define LOC_LOGICAL_BANKS 17
-#define LOC_ROWS 3
-#define LOC_COLS 4
-#define LOC_WIDTH_HIGH 7
-#define LOC_WIDTH_LOW 6
-#define LOC_REFRESH 12
-#define LOC_BURSTS 16
-#define LOC_CAS 18
-#define LOC_CS 19
-#define LOC_WE 20
-#define LOC_Tcyc 9
-#define LOC_Tac 10
-#define LOC_Trp 27
-#define LOC_Trrd 28
-#define LOC_Trcd 29
-#define LOC_Tras 30
-#define LOC_Buffered 21
-/* Types of memory the SPD can tell us about.
- * We can actually only use SDRAM and DDR.
- */
-#define TYPE_DRAM 1 /* plain old dram */
-#define TYPE_EDO 2 /* EDO dram */
-#define TYPE_Nibble 3 /* serial nibble memory */
-#define TYPE_SDR 4 /* SDRAM */
-#define TYPE_ROM 5 /* */
-#define TYPE_SGRRAM 6 /* graphics memory */
-#define TYPE_DDR 7 /* DDR sdram */
-#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */
-#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */
-#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */
-#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */
-#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */
-#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */
-#define DRIVE_STRENGTH_HIGH 0
-#define DRIVE_STRENGTH_MED 1
-#define DRIVE_STRENGTH_LOW 2
-#define DRIVE_STRENGTH_OFF 3
-
-#define OK 0
-#define ERROR -1
-/* Structure to hold information about address muxing. */
- typedef struct tagMuxDescriptor {
- u8 MuxValue;
- u8 Columns;
- u8 Rows;
- u8 MoreColumns;
-} muxdesc_t;
-
-/* Structure to define one physical bank of
- * memory. Note that dram size in bytes is
- * (2^^(rows+columns)) * width * banks / 8
-*/
-typedef struct tagDramInfo {
- u32 size; /* size in bytes */
- u32 base; /* base address */
- u8 ordinal; /* where in the memory map will we put this */
- u8 type;
- u8 rows;
- u8 cols;
- u16 width; /* width of each chip in bits */
- u8 banks; /* number of chips, aka logical banks */
- u8 bursts; /* bit-encoded allowable burst length */
- u8 CAS; /* bit-encoded CAS latency values */
- u8 CS; /* bit-encoded CS latency values */
- u8 WE; /* bit-encoded WE latency values */
- u8 Trp; /* bit-encoded row precharge time */
- u8 Trcd; /* bit-encoded RAS to CAS delay */
- u8 buffered; /* buffered or not */
- u8 refresh; /* encoded refresh rate */
-} draminfo_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCdramsetuph */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.c,
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "dma.h"
-#include "fec.h"
-
-#undef DEBUG
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
- defined(CONFIG_MPC8220_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#ifdef DEBUG
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
-#endif /* DEBUG */
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len);
-#endif
-
-typedef struct {
- u8 data[1500]; /* actual data */
- int length; /* actual length */
- int used; /* buffer in use or not */
- u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
-} NBUF;
-
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);
-
-/********************************************************************/
-#ifdef DEBUG
-static void mpc8220_fec_phydump (char *devname)
-{
- u16 phyStatus, i;
- u8 phyAddr = CONFIG_PHY_ADDR;
- u8 reg_mask[] = {
-#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
- /* regs to print: 0...7, 16...19, 21, 23, 24 */
- 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-#else
- /* regs to print: 0...8, 16...20 */
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-#endif
- };
-
- for (i = 0; i < 32; i++) {
- if (reg_mask[i]) {
- miiphy_read (devname, phyAddr, i, &phyStatus);
- printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- }
-}
-#endif
-
-/********************************************************************/
-static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
- char *data;
- static int once = 0;
-
- for (ix = 0; ix < FEC_RBD_NUM; ix++) {
- if (!once) {
- data = (char *) malloc (FEC_MAX_PKT_SIZE);
- if (data == NULL) {
- printf ("RBD INIT FAILED\n");
- return -1;
- }
- fec->rbdBase[ix].dataPointer = (u32) data;
- }
- fec->rbdBase[ix].status = FEC_RBD_EMPTY;
- fec->rbdBase[ix].dataLength = 0;
- }
- once++;
-
- /*
- * have the last RBD to close the ring
- */
- fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
- fec->rbdIndex = 0;
-
- return 0;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
-
- for (ix = 0; ix < FEC_TBD_NUM; ix++) {
- fec->tbdBase[ix].status = 0;
- }
-
- /*
- * Have the last TBD to close the ring
- */
- fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
-
- /*
- * Initialize some indices
- */
- fec->tbdIndex = 0;
- fec->usedTbdIndex = 0;
- fec->cleanTbdNum = FEC_TBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
-{
- /*
- * Reset buffer descriptor as empty
- */
- if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
- pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
- else
- pRbd->status = FEC_RBD_EMPTY;
-
- pRbd->dataLength = 0;
-
- /*
- * Now, we have an empty RxBD, restart the SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
- /*
- * Increment BD count
- */
- fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
-{
- FEC_TBD *pUsedTbd;
-
-#ifdef DEBUG
- printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
- fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
- /*
- * process all the consumed TBDs
- */
- while (fec->cleanTbdNum < FEC_TBD_NUM) {
- pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
- if (pUsedTbd->status & FEC_TBD_READY) {
-#ifdef DEBUG
- printf ("Cannot clean TBD %d, in use\n",
- fec->cleanTbdNum);
-#endif
- return;
- }
-
- /*
- * clean this buffer descriptor
- */
- if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
- pUsedTbd->status = FEC_TBD_WRAP;
- else
- pUsedTbd->status = 0;
-
- /*
- * update some indeces for a correct handling of the TBD ring
- */
- fec->cleanTbdNum++;
- fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
- }
-}
-
-/********************************************************************/
-static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
-{
- u8 currByte; /* byte for which to compute the CRC */
- int byte; /* loop - counter */
- int bit; /* loop - counter */
- u32 crc = 0xffffffff; /* initial value */
-
- /*
- * The algorithm used is the following:
- * we loop on each of the six bytes of the provided address,
- * and we compute the CRC by left-shifting the previous
- * value by one position, so that each bit in the current
- * byte of the address may contribute the calculation. If
- * the latter and the MSB in the CRC are different, then
- * the CRC value so computed is also ex-ored with the
- * "polynomium generator". The current byte of the address
- * is also shifted right by one bit at each iteration.
- * This is because the CRC generatore in hardware is implemented
- * as a shift-register with as many ex-ores as the radixes
- * in the polynomium. This suggests that we represent the
- * polynomiumm itself as a 32-bit constant.
- */
- for (byte = 0; byte < 6; byte++) {
- currByte = mac[byte];
- for (bit = 0; bit < 8; bit++) {
- if ((currByte & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- currByte >>= 1;
- }
- }
-
- crc = crc >> 26;
-
- /*
- * Set individual hash table register
- */
- if (crc >= 32) {
- fec->eth->iaddr1 = (1 << (crc - 32));
- fec->eth->iaddr2 = 0;
- } else {
- fec->eth->iaddr1 = 0;
- fec->eth->iaddr2 = (1 << crc);
- }
-
- /*
- * Set physical address
- */
- fec->eth->paddr1 =
- (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
- fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
- const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Begin\n");
-#endif
-
- /*
- * Initialize RxBD/TxBD rings
- */
- mpc8220_fec_rbd_init (fec);
- mpc8220_fec_tbd_init (fec);
-
- /*
- * Set up Pin Muxing for FEC 1
- */
- *(vu_long *) MMAP_PCFG = 0;
- *(vu_long *) (MMAP_PCFG + 4) = 0;
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
- fec->eth->ievent = 0xffffffff;
-
- /*
- * Set interrupt mask register
- */
- fec->eth->imask = 0x00000000;
-
- /*
- * Set FEC-Lite receive control register(R_CNTRL):
- */
- if (fec->xcv_type == SEVENWIRE) {
- /*
- * Frame length=1518; 7-wire mode
- */
- fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
- } else {
- /*
- * Frame length=1518; MII mode;
- */
- fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
- }
-
- fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- /* tbd - rtm */
- /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
- /* No MII for 7-wire mode */
- fec->eth->mii_speed = 0x00000030;
- }
-
- /*
- * Set Opcode/Pause Duration Register
- */
- fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */
-
- /*
- * Set Rx FIFO alarm and granularity value
- */
- fec->eth->rfifo_cntrl = 0x0c000000;
- fec->eth->rfifo_alarm = 0x0000030c;
-#ifdef DEBUG
- if (fec->eth->rfifo_status & 0x00700000) {
- printf ("mpc8220_fec_init() RFIFO error\n");
- }
-#endif
-
- /*
- * Set Tx FIFO granularity value
- */
- /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
- fec->eth->tfifo_cntrl = 0x0e000000;
-#ifdef DEBUG
- printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
- printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
-#endif
-
- /*
- * Set transmit fifo watermark register(X_WMRK), default = 64
- */
- fec->eth->tfifo_alarm = 0x00000080;
- fec->eth->x_wmrk = 0x2;
-
- /*
- * Set individual address filter for unicast address
- * and set physical address registers.
- */
- mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
-
- /*
- * Set multicast address filter
- */
- fec->eth->gaddr1 = 0x00000000;
- fec->eth->gaddr2 = 0x00000000;
-
- /*
- * Turn ON cheater FSM: ????
- */
- fec->eth->xmit_fsm = 0x03000000;
-
-#if 1
-/*#if defined(CONFIG_MPC5200)*/
- /*
- * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
- * work w/ the current receive task.
- */
- dma->PtdCntrl |= 0x00000001;
-#endif
-
- /*
- * Set priority of different initiators
- */
- dma->IPR0 = 7; /* always */
- dma->IPR3 = 6; /* Eth RX */
- dma->IPR4 = 5; /* Eth Tx */
-
- /*
- * Clear SmartDMA task interrupt pending bits
- */
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-
- /*
- * Initialize SmartDMA parameters stored in SRAM
- */
- *(int *) FEC_TBD_BASE = (int) fec->tbdBase;
- *(int *) FEC_RBD_BASE = (int) fec->rbdBase;
- *(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
- *(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
-
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Initialize PHY(LXT971A):
- *
- * Generally, on power up, the LXT971A reads its configuration
- * pins to check for forced operation, If not cofigured for
- * forced operation, it uses auto-negotiation/parallel detection
- * to automatically determine line operating conditions.
- * If the PHY device on the other side of the link supports
- * auto-negotiation, the LXT971A auto-negotiates with it
- * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
- * support auto-negotiation, the LXT971A automatically detects
- * the presence of either link pulses(10Mbps PHY) or Idle
- * symbols(100Mbps) and sets its operating conditions accordingly.
- *
- * When auto-negotiation is controlled by software, the following
- * steps are recommended.
- *
- * Note:
- * The physical address is dependent on hardware configuration.
- *
- */
- int timeout = 1;
- u16 phyStatus;
-
- /*
- * Reset PHY, then delay 300ns
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
- udelay (1000);
-
- if (fec->xcv_type == MII10) {
- /*
- * Force 10Base-T, FDX operation
- */
-#ifdef DEBUG
- printf ("Forcing 10 Mbps ethernet link... ");
-#endif
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
- /*
- miiphy_write(fec, phyAddr, 0x0, 0x0100);
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
- timeout = 20;
- do { /* wait for link status to go down */
- udelay (10000);
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("hmmm, should not have waited...");
-#endif
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("=");
-#endif
- } while ((phyStatus & 0x0004)); /* !link up */
-
- timeout = 1000;
- do { /* wait for link status to come back up */
- udelay (10000);
- if ((timeout--) == 0) {
- printf ("failed. Link is down.\n");
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("+");
-#endif
- } while (!(phyStatus & 0x0004)); /* !link up */
-
-#ifdef DEBUG
- printf ("done.\n");
-#endif
- } else { /* MII100 */
- /*
- * Set the auto-negotiation advertisement register bits
- */
- miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
- /*
- * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
- /*
- * Wait for AN completion
- */
- timeout = 5000;
- do {
- udelay (1000);
-
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 0 failed...\n");
-#endif
- return -1;
- }
-
- if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
- 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
- return -1;
- }
- } while (!(phyStatus & 0x0004));
-
-#ifdef DEBUG
- printf ("PHY auto neg complete! \n");
-#endif
- }
-
- }
-
- /*
- * Enable FEC-Lite controller
- */
- fec->eth->ecntrl |= 0x00000006;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * Enable SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Done \n");
-#endif
-
- return 1;
-}
-
-/********************************************************************/
-static void mpc8220_fec_halt (struct eth_device *dev)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- int counter = 0xffff;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * mask FEC chip interrupts
- */
- fec->eth->imask = 0;
-
- /*
- * issue graceful stop command to the FEC transmitter if necessary
- */
- fec->eth->x_cntrl |= 0x00000001;
-
- /*
- * wait for graceful stop to register
- */
- while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
-
- /*
- * Disable SmartDMA tasks
- */
- DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
- DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-
- /*
- * Disable the Ethernet Controller
- */
- fec->eth->ecntrl &= 0xfffffffd;
-
- /*
- * Clear FIFO status registers
- */
- fec->eth->rfifo_status &= 0x00700000;
- fec->eth->tfifo_status &= 0x00700000;
-
- fec->eth->reset_cntrl = 0x01000000;
-
- /*
- * Issue a reset command to the FEC chip
- */
- fec->eth->ecntrl |= 0x1;
-
- /*
- * wait at least 16 clock cycles
- */
- udelay (10);
-
-#ifdef DEBUG
- printf ("Ethernet task stopped\n");
-#endif
-}
-
-#ifdef DEBUG
-/********************************************************************/
-
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
- || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->tfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
- }
-}
-
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
- || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->rfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
- }
-}
-#endif /* DEBUG */
-
-/********************************************************************/
-
-static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
- int data_length)
-{
- /*
- * This routine transmits one frame. This routine only accepts
- * 6-byte Ethernet addresses.
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_TBD *pTbd;
-
-#ifdef DEBUG
- printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
- tfifo_print (dev->name, fec);
-#endif
-
- /*
- * Clear Tx BD ring at first
- */
- mpc8220_fec_tbd_scrub (fec);
-
- /*
- * Check for valid length of data.
- */
- if ((data_length > 1500) || (data_length <= 0)) {
- return -1;
- }
-
- /*
- * Check the number of vacant TxBDs.
- */
- if (fec->cleanTbdNum < 1) {
-#ifdef DEBUG
- printf ("No available TxBDs ...\n");
-#endif
- return -1;
- }
-
- /*
- * Get the first TxBD to send the mac header
- */
- pTbd = &fec->tbdBase[fec->tbdIndex];
- pTbd->dataLength = data_length;
- pTbd->dataPointer = (u32) eth_data;
- pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
- fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
-#ifdef DEBUG
- printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
-#endif
-
- /*
- * Kick the MII i/f
- */
- if (fec->xcv_type != SEVENWIRE) {
- u16 phyStatus;
-
- miiphy_read (dev->name, 0, 0x1, &phyStatus);
- }
-
- /*
- * Enable SmartDMA transmit task
- */
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
- DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
-#ifdef DEBUG
- printf ("+");
-#endif
-
- fec->cleanTbdNum -= 1;
-
-#ifdef DEBUG
- printf ("smartDMA ethernet Tx task enabled\n");
-#endif
- /*
- * wait until frame is sent .
- */
- while (pTbd->status & FEC_TBD_READY) {
- udelay (10);
-#ifdef DEBUG
- printf ("TDB status = %04x\n", pTbd->status);
-#endif
- }
-
- return 0;
-}
-
-
-/********************************************************************/
-static int mpc8220_fec_recv (struct eth_device *dev)
-{
- /*
- * This command pulls one frame from the card
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
- unsigned long ievent;
- int frame_length, len = 0;
- NBUF *frame;
-
-#ifdef DEBUG
- printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
- printf ("-");
-#endif
-
- /*
- * Check if any critical events have happened
- */
- ievent = fec->eth->ievent;
- fec->eth->ievent = ievent;
- if (ievent & 0x20060000) {
- /* BABT, Rx/Tx FIFO errors */
- mpc8220_fec_halt (dev);
- mpc8220_fec_init (dev, NULL);
- return 0;
- }
- if (ievent & 0x80000000) {
- /* Heartbeat error */
- fec->eth->x_cntrl |= 0x00000001;
- }
- if (ievent & 0x10000000) {
- /* Graceful stop complete */
- if (fec->eth->x_cntrl & 0x00000001) {
- mpc8220_fec_halt (dev);
- fec->eth->x_cntrl &= ~0x00000001;
- mpc8220_fec_init (dev, NULL);
- }
- }
-
- if (!(pRbd->status & FEC_RBD_EMPTY)) {
- if ((pRbd->status & FEC_RBD_LAST)
- && !(pRbd->status & FEC_RBD_ERR)
- && ((pRbd->dataLength - 4) > 14)) {
-
- /*
- * Get buffer address and size
- */
- frame = (NBUF *) pRbd->dataPointer;
- frame_length = pRbd->dataLength - 4;
-
-#if (0)
- {
- int i;
-
- printf ("recv data hdr:");
- for (i = 0; i < 14; i++)
- printf ("%x ", *(frame->head + i));
- printf ("\n");
- }
-#endif
- /*
- * Fill the buffer and pass it to upper layers
- */
-/* memcpy(buff, frame->head, 14);
- memcpy(buff + 14, frame->data, frame_length);*/
- NetReceive ((volatile uchar *) pRbd->dataPointer,
- frame_length);
- len = frame_length;
- }
- /*
- * Reset buffer descriptor as empty
- */
- mpc8220_fec_rbd_clean (fec, pRbd);
- }
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
- return len;
-}
-
-
-/********************************************************************/
-int mpc8220_fec_initialize (bd_t * bis)
-{
- mpc8220_fec_priv *fec;
-
-#ifdef CONFIG_HAS_ETH1
- mpc8220_fec_priv *fec2;
-#endif
- struct eth_device *dev;
- char *tmp, *end;
- char env_enetaddr[6];
-
-#ifdef CONFIG_HAS_ETH1
- char env_enet1addr[6];
-#endif
- int i;
-
- fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- dev = (struct eth_device *) malloc (sizeof (*dev));
- memset (dev, 0, sizeof *dev);
-
- fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_HAS_ETH1
- fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- fec2->eth = (ethernet_regs *) MMAP_FEC2;
-#endif
- fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
- fec->rbdBase =
- (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
- fec->xcv_type = MII100;
-
- dev->priv = (void *) fec;
- dev->iobase = MMAP_FEC1;
- dev->init = mpc8220_fec_init;
- dev->halt = mpc8220_fec_halt;
- dev->send = mpc8220_fec_send;
- dev->recv = mpc8220_fec_recv;
-
- sprintf (dev->name, "FEC ETHERNET");
- eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register (dev->name,
- fec8220_miiphy_read, fec8220_miiphy_write);
-#endif
-
- /*
- * Try to set the mac address now. The fec mac address is
- * a garbage after reset. When not using fec for booting
- * the Linux fec driver will try to work with this garbage.
- */
- tmp = getenv ("ethaddr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec, env_enetaddr);
- }
-#ifdef CONFIG_HAS_ETH1
- tmp = getenv ("eth1addr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enet1addr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
- }
-#endif
-
- return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- /*
- * reading from any PHY's register is done by properly
- * programming the FEC's MII data register.
- */
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data =
- (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
- | reg);
-
- /*
- * wait for the related interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Read MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear mii interrupt bit
- */
- eth->ievent = 0x00800000;
-
- /*
- * it's now safe to read the PHY's register
- */
- *retVal = (u16) eth->mii_data;
-
- return 0;
-}
-
-/********************************************************************/
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
- FEC_MII_DATA_TA | phy | reg | data);
-
- /*
- * wait for the MII interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Write MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear MII interrupt bit
- */
- eth->ievent = 0x00800000;
-
- return 0;
-}
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len)
-{
- int i;
- char c;
- unsigned int crc, count;
-
- /*
- * crc32 algorithm
- */
- /*
- * crc = 0xffffffff; * The initialized value should be 0xffffffff
- */
- crc = crc_value;
-
- for (i = len; --i >= 0;) {
- c = *string++;
- for (count = 0; count < 8; count++) {
- if ((c & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- c >>= 1;
- }
- }
-
- /*
- * In big endian system, do byte swaping for crc value
- */
- return crc;
-}
-#endif /* DEBUG */
-
-#endif /* CONFIG_MPC8220_FEC */
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.h
- * (C) Copyright Motorola, Inc., 2000
- *
- * odin ethernet header file
- */
-
-#ifndef __MPC8220_FEC_H
-#define __MPC8220_FEC_H
-
-#include <common.h>
-#include <mpc8220.h>
-#include "dma.h"
-
-typedef struct ethernet_register_set {
-
-/* [10:2]addr = 00 */
-
-/* Control and status Registers (offset 000-1FF) */
-
- volatile u32 fec_id; /* MBAR_ETH + 0x000 */
- volatile u32 ievent; /* MBAR_ETH + 0x004 */
- volatile u32 imask; /* MBAR_ETH + 0x008 */
-
- volatile u32 RES0[1]; /* MBAR_ETH + 0x00C */
- volatile u32 r_des_active; /* MBAR_ETH + 0x010 */
- volatile u32 x_des_active; /* MBAR_ETH + 0x014 */
- volatile u32 r_des_active_cl; /* MBAR_ETH + 0x018 */
- volatile u32 x_des_active_cl; /* MBAR_ETH + 0x01C */
- volatile u32 ivent_set; /* MBAR_ETH + 0x020 */
- volatile u32 ecntrl; /* MBAR_ETH + 0x024 */
-
- volatile u32 RES1[6]; /* MBAR_ETH + 0x028-03C */
- volatile u32 mii_data; /* MBAR_ETH + 0x040 */
- volatile u32 mii_speed; /* MBAR_ETH + 0x044 */
- volatile u32 mii_status; /* MBAR_ETH + 0x048 */
-
- volatile u32 RES2[5]; /* MBAR_ETH + 0x04C-05C */
- volatile u32 mib_data; /* MBAR_ETH + 0x060 */
- volatile u32 mib_control; /* MBAR_ETH + 0x064 */
-
- volatile u32 RES3[6]; /* MBAR_ETH + 0x068-7C */
- volatile u32 r_activate; /* MBAR_ETH + 0x080 */
- volatile u32 r_cntrl; /* MBAR_ETH + 0x084 */
- volatile u32 r_hash; /* MBAR_ETH + 0x088 */
- volatile u32 r_data; /* MBAR_ETH + 0x08C */
- volatile u32 ar_done; /* MBAR_ETH + 0x090 */
- volatile u32 r_test; /* MBAR_ETH + 0x094 */
- volatile u32 r_mib; /* MBAR_ETH + 0x098 */
- volatile u32 r_da_low; /* MBAR_ETH + 0x09C */
- volatile u32 r_da_high; /* MBAR_ETH + 0x0A0 */
-
- volatile u32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */
- volatile u32 x_activate; /* MBAR_ETH + 0x0C0 */
- volatile u32 x_cntrl; /* MBAR_ETH + 0x0C4 */
- volatile u32 backoff; /* MBAR_ETH + 0x0C8 */
- volatile u32 x_data; /* MBAR_ETH + 0x0CC */
- volatile u32 x_status; /* MBAR_ETH + 0x0D0 */
- volatile u32 x_mib; /* MBAR_ETH + 0x0D4 */
- volatile u32 x_test; /* MBAR_ETH + 0x0D8 */
- volatile u32 fdxfc_da1; /* MBAR_ETH + 0x0DC */
- volatile u32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */
- volatile u32 paddr1; /* MBAR_ETH + 0x0E4 */
- volatile u32 paddr2; /* MBAR_ETH + 0x0E8 */
- volatile u32 op_pause; /* MBAR_ETH + 0x0EC */
-
- volatile u32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */
- volatile u32 instr_reg; /* MBAR_ETH + 0x100 */
- volatile u32 context_reg; /* MBAR_ETH + 0x104 */
- volatile u32 test_cntrl; /* MBAR_ETH + 0x108 */
- volatile u32 acc_reg; /* MBAR_ETH + 0x10C */
- volatile u32 ones; /* MBAR_ETH + 0x110 */
- volatile u32 zeros; /* MBAR_ETH + 0x114 */
- volatile u32 iaddr1; /* MBAR_ETH + 0x118 */
- volatile u32 iaddr2; /* MBAR_ETH + 0x11C */
- volatile u32 gaddr1; /* MBAR_ETH + 0x120 */
- volatile u32 gaddr2; /* MBAR_ETH + 0x124 */
- volatile u32 random; /* MBAR_ETH + 0x128 */
- volatile u32 rand1; /* MBAR_ETH + 0x12C */
- volatile u32 tmp; /* MBAR_ETH + 0x130 */
-
- volatile u32 RES6[3]; /* MBAR_ETH + 0x134-13C */
- volatile u32 fifo_id; /* MBAR_ETH + 0x140 */
- volatile u32 x_wmrk; /* MBAR_ETH + 0x144 */
- volatile u32 fcntrl; /* MBAR_ETH + 0x148 */
- volatile u32 r_bound; /* MBAR_ETH + 0x14C */
- volatile u32 r_fstart; /* MBAR_ETH + 0x150 */
- volatile u32 r_count; /* MBAR_ETH + 0x154 */
- volatile u32 r_lag; /* MBAR_ETH + 0x158 */
- volatile u32 r_read; /* MBAR_ETH + 0x15C */
- volatile u32 r_write; /* MBAR_ETH + 0x160 */
- volatile u32 x_count; /* MBAR_ETH + 0x164 */
- volatile u32 x_lag; /* MBAR_ETH + 0x168 */
- volatile u32 x_retry; /* MBAR_ETH + 0x16C */
- volatile u32 x_write; /* MBAR_ETH + 0x170 */
- volatile u32 x_read; /* MBAR_ETH + 0x174 */
-
- volatile u32 RES7[2]; /* MBAR_ETH + 0x178-17C */
- volatile u32 fm_cntrl; /* MBAR_ETH + 0x180 */
- volatile u32 rfifo_data; /* MBAR_ETH + 0x184 */
- volatile u32 rfifo_status; /* MBAR_ETH + 0x188 */
- volatile u32 rfifo_cntrl; /* MBAR_ETH + 0x18C */
- volatile u32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */
- volatile u32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */
- volatile u32 rfifo_alarm; /* MBAR_ETH + 0x198 */
- volatile u32 rfifo_rdptr; /* MBAR_ETH + 0x19C */
- volatile u32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */
- volatile u32 tfifo_data; /* MBAR_ETH + 0x1A4 */
- volatile u32 tfifo_status; /* MBAR_ETH + 0x1A8 */
- volatile u32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */
- volatile u32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */
- volatile u32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */
- volatile u32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */
- volatile u32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */
- volatile u32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */
-
- volatile u32 reset_cntrl; /* MBAR_ETH + 0x1C4 */
- volatile u32 xmit_fsm; /* MBAR_ETH + 0x1C8 */
-
- volatile u32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */
- volatile u32 rdes_data0; /* MBAR_ETH + 0x1D8 */
- volatile u32 rdes_data1; /* MBAR_ETH + 0x1DC */
- volatile u32 r_length; /* MBAR_ETH + 0x1E0 */
- volatile u32 x_length; /* MBAR_ETH + 0x1E4 */
- volatile u32 x_addr; /* MBAR_ETH + 0x1E8 */
- volatile u32 cdes_data; /* MBAR_ETH + 0x1EC */
- volatile u32 status; /* MBAR_ETH + 0x1F0 */
- volatile u32 dma_control; /* MBAR_ETH + 0x1F4 */
- volatile u32 des_cmnd; /* MBAR_ETH + 0x1F8 */
- volatile u32 data; /* MBAR_ETH + 0x1FC */
-
- /* MIB COUNTERS (Offset 200-2FF) */
-
- volatile u32 rmon_t_drop; /* MBAR_ETH + 0x200 */
- volatile u32 rmon_t_packets; /* MBAR_ETH + 0x204 */
- volatile u32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
- volatile u32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
- volatile u32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
- volatile u32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
- volatile u32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
- volatile u32 rmon_t_frag; /* MBAR_ETH + 0x21C */
- volatile u32 rmon_t_jab; /* MBAR_ETH + 0x220 */
- volatile u32 rmon_t_col; /* MBAR_ETH + 0x224 */
- volatile u32 rmon_t_p64; /* MBAR_ETH + 0x228 */
- volatile u32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
- volatile u32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
- volatile u32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
- volatile u32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
- volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */
- volatile u32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
- volatile u32 rmon_t_octets; /* MBAR_ETH + 0x244 */
- volatile u32 ieee_t_drop; /* MBAR_ETH + 0x248 */
- volatile u32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
- volatile u32 ieee_t_1col; /* MBAR_ETH + 0x250 */
- volatile u32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
- volatile u32 ieee_t_def; /* MBAR_ETH + 0x258 */
- volatile u32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
- volatile u32 ieee_t_excol; /* MBAR_ETH + 0x260 */
- volatile u32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
- volatile u32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
- volatile u32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
- volatile u32 t_fdxfc; /* MBAR_ETH + 0x270 */
- volatile u32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
-
- volatile u32 RES9[2]; /* MBAR_ETH + 0x278-27C */
- volatile u32 rmon_r_drop; /* MBAR_ETH + 0x280 */
- volatile u32 rmon_r_packets; /* MBAR_ETH + 0x284 */
- volatile u32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
- volatile u32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
- volatile u32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
- volatile u32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
- volatile u32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
- volatile u32 rmon_r_frag; /* MBAR_ETH + 0x29C */
- volatile u32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
-
- volatile u32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
-
- volatile u32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
- volatile u32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
- volatile u32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
- volatile u32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
- volatile u32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
- volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */
- volatile u32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
- volatile u32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
- volatile u32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
- volatile u32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
- volatile u32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
- volatile u32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
- volatile u32 r_macerr; /* MBAR_ETH + 0x2D8 */
- volatile u32 r_fdxfc; /* MBAR_ETH + 0x2DC */
- volatile u32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
-
- volatile u32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */
-
- volatile u32 RES11[64]; /* MBAR_ETH + 0x300-3FF */
-} ethernet_regs;
-
-/* Receive & Transmit Buffer Descriptor definitions */
-typedef struct BufferDescriptor {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_RBD;
-
-typedef struct {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_TBD;
-
-/* private structure */
-typedef enum {
- SEVENWIRE, /* 7-wire */
- MII10, /* MII 10Mbps */
- MII100 /* MII 100Mbps */
-} xceiver_type;
-
-typedef struct {
- ethernet_regs *eth;
- xceiver_type xcv_type; /* transceiver type */
- FEC_RBD *rbdBase; /* RBD ring */
- FEC_TBD *tbdBase; /* TBD ring */
- u16 rbdIndex; /* next receive BD to read */
- u16 tbdIndex; /* next transmit BD to send */
- u16 usedTbdIndex; /* next transmit BD to clean */
- u16 cleanTbdNum; /* the number of available transmit BDs */
-} mpc8220_fec_priv;
-
-/* Ethernet parameter area */
-#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00)
-#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04)
-#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08)
-#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c)
-
-/* BD Numer definitions */
-#define FEC_TBD_NUM 48 /* The user can adjust this value */
-#define FEC_RBD_NUM 32 /* The user can adjust this value */
-
-/* packet size limit */
-#define FEC_MAX_PKT_SIZE 1536
-
-/* RBD bits definitions */
-#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
-#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_RBD_INT 0x1000 /* Interrupt */
-#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
-#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
-#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
-#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
-#define FEC_RBD_LG 0x0020 /* Frame length violation */
-#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
-#define FEC_RBD_SH 0x0008 /* Short frame */
-#define FEC_RBD_CR 0x0004 /* CRC error */
-#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
-#define FEC_RBD_TR 0x0001 /* Frame is truncated */
-#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
- FEC_RBD_OV | FEC_RBD_TR)
-
-/* TBD bits definitions */
-#define FEC_TBD_READY 0x8000 /* Buffer is ready */
-#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_TBD_INT 0x1000 /* Interrupt */
-#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
-#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
-#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
-
-/* MII-related definitios */
-#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
-#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
-#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
-#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
-#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
-#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
-#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
-
-#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
-#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
-
-#endif /* __MPC8220_FEC_H */
+++ /dev/null
-/*
- * Copyright (C) 2004, Freescale Semiconductor, Inc.
- *
- * This file contains microcode for the FEC controller of the MPC8220.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MPC8220)
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.align 9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x00000094
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long 0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000e0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long 0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000(153): LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004(153): LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008(156): DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C(157): DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010(158): DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(162): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(164): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(165): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010cf04c /* 0020(165): DRD2B1: var4 = EU3(); EU3(var1,var12) */
-.long 0x82180349 /* 0024(169): LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028(172): LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C(174): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf04e /* 0030(174): DRD2B1: var6 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0034(175): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020cf04f /* 0038(175): DRD2B1: var8 = EU3(); EU3(var1,var15) */
-.long 0x00000b88 /* 003C(176): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x80025184 /* 0040(205): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x86810412 /* 0044(205): LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */
-.long 0x0200cf88 /* 0048(209): DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */
-.long 0x80025184 /* 004C(217): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x8681845b /* 0050(217): LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */
-.long 0x0000cf88 /* 0054(221): DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0xc31883a4 /* 0058(225): LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */
-.long 0x80190000 /* 005C(225): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0060(227): DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038360 /* 0064(232): LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */
-.long 0x81c50000 /* 0068(233): LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 006C(235): DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0070(236): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc418836d /* 0074(238): LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */
-.long 0x83990000 /* 0078(238): LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 007C(240): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0080(241): DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0084(245): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0088(247): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 008C(248): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04c /* 0090(248): DRD2B1: idx0 = EU3(); EU3(var1,var12) */
-.long 0x000001f8 /* 0094(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80095b00 /* 0000(280): LCDEXT: idx0 = 0xf0025b00; ; */
-.long 0x85c60004 /* 0004(280): LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008(283): DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C(284): DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010(285): DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(288): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(290): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(291): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024cf04d /* 0020(291): DRD2B1: var9 = EU3(); EU3(var1,var13) */
-.long 0x84980309 /* 0024(294): LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028(297): LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C(297): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030(299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010cf04e /* 0034(299): DRD2B1: var4 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0038(300): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014cf04f /* 003C(300): DRD2B1: var5 = EU3(); EU3(var1,var15) */
-.long 0x70000000 /* 0040(301): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028cf050 /* 0044(301): DRD2B1: var10 = EU3(); EU3(var1,var16) */
-.long 0x70000000 /* 0048(302): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf051 /* 004C(302): DRD2B1: var6 = EU3(); EU3(var1,var17) */
-.long 0x10000b90 /* 0050(303): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054(304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01ccf0a1 /* 0058(304): DRD2B1: var7 = EU3(); EU3(var2,idx1) */
-.long 0xc2988312 /* 005C(308): LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060(308): LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064(310): DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x800251a4 /* 0068(315): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc30104dc /* 006C(315): LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */
-.long 0x839a032d /* 0070(316): LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */
-.long 0x0220c798 /* 0074(321): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */
-.long 0x800251a4 /* 0078(329): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0x99198337 /* 007C(329): LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */
-.long 0x022ac798 /* 0080(333): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */
-.long 0x800251a4 /* 0084(350): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc1430000 /* 0088(350): LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 008C(351): LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x0a2ac790 /* 0090(354): DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */
-.long 0x81988000 /* 0094(359): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000002 /* 0098(361): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
-.long 0x0c4cfc4d /* 009C(361): DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
-.long 0xc21883ad /* 00A0(365): LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 00A4(365): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 00A8(367): DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 00AC(371): LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81ca0000 /* 00B0(372): LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00B4(374): DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00B8(375): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00BC(378): LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00C0(378): LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00C4(380): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00C8(381): DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00CC(382): DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00D0(386): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00D4(388): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00D8(389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04d /* 00DC(389): DRD2B1: idx0 = EU3(); EU3(var1,var13) */
-.long 0x000001f8 /* 00E0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0xf0025b00 /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x00000800 /* var[16] */
-.long 0x00000001 /* var[17] */
-.long 0x00000000 /* var[18] */
-.long 0x00000000 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000004 /* inc[2] */
-.long 0x20000001 /* inc[3] */
-.long 0x80000000 /* inc[4] */
-.long 0x40000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long 0xf0025b00 /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000008 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0xc000fffc /* inc[3] */
-.long 0xe0000004 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x4000ffff /* inc[6] */
-.long 0xe0000001 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 128, 0x0
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc8220.h>
-#include <i2c.h>
-
-typedef struct mpc8220_i2c {
- volatile u32 adr; /* I2Cn + 0x00 */
- volatile u32 fdr; /* I2Cn + 0x04 */
- volatile u32 cr; /* I2Cn + 0x08 */
- volatile u32 sr; /* I2Cn + 0x0C */
- volatile u32 dr; /* I2Cn + 0x10 */
-} i2c_t;
-
-/* I2Cn control register bits */
-#define I2C_EN 0x80
-#define I2C_IEN 0x40
-#define I2C_STA 0x20
-#define I2C_TX 0x10
-#define I2C_TXAK 0x08
-#define I2C_RSTA 0x04
-#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF 0x80
-#define I2C_AAS 0x40
-#define I2C_BB 0x20
-#define I2C_AL 0x10
-#define I2C_SRW 0x04
-#define I2C_IF 0x02
-#define I2C_RXAK 0x01
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 1
-
-struct mpc8220_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 * reg);
-static void mpc_reg_out (volatile u32 * reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in (volatile u32 * reg)
-{
- int ret;
- ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out (volatile u32 * reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in (reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb (void)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in (®s->sr);
-
- while (timeout-- && (status & I2C_BB)) {
-#if 1
- volatile int temp;
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- temp = mpc_reg_in (®s->dr);
- mpc_reg_out (®s->cr, 0, I2C_STA);
- mpc_reg_out (®s->cr, 0, 0);
- mpc_reg_out (®s->cr, I2C_EN, 0);
-#endif
- udelay (1000);
- status = mpc_reg_in (®s->sr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in (®s->sr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay (1000);
- *status = mpc_reg_in (®s->sr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out (®s->sr, 0, I2C_IF);
- return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag)
- chip |= 1;
-
- mpc_reg_out (®s->cr, I2C_TX, I2C_TX);
- mpc_reg_out (®s->dr, chip, 0);
-
- if (wait_for_pin (&status))
- return -2;
- if (status & I2C_RXAK)
- return -3;
- return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out (®s->dr, buf[wrcount], 0);
-
- if (wait_for_pin (&status))
- break;
-
- if (status & I2C_RXAK)
- break;
-
- }
-
- return !(wrcount == len);
- return 0;
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out (®s->cr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in (®s->dr);
-
- if (dummy)
- dummy = 0;
- else
- rdcount++;
-
- if (wait_for_pin (&status))
- return -4;
- }
-
- mpc_reg_out (®s->cr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in (®s->dr);
-
- if (wait_for_pin (&status))
- return -5;
-
- mpc_reg_out (®s->cr, 0, I2C_TXAK);
- return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
-
- mpc_reg_out (®s->cr, 0, 0);
- mpc_reg_out (®s->adr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out (®s->fdr, mpc_get_fdr (speed), 0);
-
- /* Enable module
- */
- mpc_reg_out (®s->cr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out (®s->sr, 0, I2C_IF);
- return;
-}
-
-static int mpc_get_fdr (int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 };
- struct mpc8220_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->bus_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] -
- 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed * scl) {
- if ((speed * scl - ipb) < bestmatch) {
- bestmatch = speed * scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb / scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- printf ("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
-
- if (!do_address (chip, 0)) {
- mpc_reg_out (®s->cr, 0, I2C_STA);
- break;
- }
-
- mpc_reg_out (®s->cr, 0, I2C_STA);
- udelay (50);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_RSTA, I2C_RSTA);
- if (do_address (chip, 1)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes (chip, (char *)buf, len)) {
- printf ("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (®s->cr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)buf, len)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (®s->cr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-/* I2cCore.c - MPC8220 PPC I2C Library */
-
-/* Copyright 2004 Freescale Semiconductor, Inc. */
-
-/*
-modification history
---------------------
-01c,29jun04,tcl 1.3 removed CR. Added two bytes offset support.
-01b,19jan04,tcl 1.2 removed i2cMsDelay and sysDecGet. renamed i2cMsDelay
- back to sysMsDelay
-01a,19jan04,tcl 1.1 created and seperated from i2c.c
-*/
-
-/*
-DESCRIPTION
-This file contain I2C low level handling library functions
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <vxWorks.h>
-#include <sysLib.h>
-#include <iosLib.h>
-#include <logLib.h>
-#include <tickLib.h>
-
-/* BSP Includes */
-#include "config.h"
-#include "mpc8220.h"
-#include "i2cCore.h"
-
-#ifdef DEBUG_I2CCORE
-int I2CCDbg = 0;
-#endif
-
-#define ABS(x) ((x < 0)? -x : x)
-
-char *I2CERR[16] = {
- "Transfer in Progress\n", /* 0 */
- "Transfer complete\n",
- "Not Addressed\n", /* 2 */
- "Addressed as a slave\n",
- "Bus is Idle\n", /* 4 */
- "Bus is busy\n",
- "Arbitration Lost\n", /* 6 */
- "Arbitration on Track\n",
- "Slave receive, master writing to slave\n", /* 8 */
- "Slave transmit, master reading from slave\n",
- "Interrupt is pending\n", /* 10 */
- "Interrupt complete\n",
- "Acknowledge received\n", /* 12 */
- "No acknowledge received\n",
- "Unknown status\n", /* 14 */
- "\n"
-};
-
-/******************************************************************************
- *
- * chk_status - Check I2C status bit
- *
- * RETURNS: OK, or ERROR if the bit encounter
- *
- */
-
-STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse)
-{
- int i, status = 0;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n",
- pi2c->sr, sta_bit, truefalse, 0, 0, 0));
-
- if (i == I2C_POLL_COUNT) {
- switch (sta_bit) {
- case I2C_STA_CF:
- status = 0;
- break;
- case I2C_STA_AAS:
- status = 2;
- break;
- case I2C_STA_BB:
- status = 4;
- break;
- case I2C_STA_AL:
- status = 6;
- break;
- case I2C_STA_SRW:
- status = 8;
- break;
- case I2C_STA_IF:
- status = 10;
- break;
- case I2C_STA_RXAK:
- status = 12;
- break;
- default:
- status = 14;
- break;
- }
-
- if (!truefalse)
- status++;
-
- I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0));
- I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0));
- }
-
- return (ERROR);
-}
-
-/******************************************************************************
- *
- * I2C Enable - Enable the I2C Controller
- *
- */
-STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet)
-{
- int fdr = pi2cSet->bit_rate;
- UINT8 adr = pi2cSet->i2c_adr;
-
- I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0));
-
- i2c_clear (pi2c); /* Clear FDR, ADR, SR and CR reg */
-
- SetI2cFDR (pi2c, fdr); /* Frequency */
- pi2c->adr = adr;
-
- pi2c->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK) {
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (chk_status (pi2c, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Disable - Disable the I2C Controller
- *
- */
-STATUS i2c_disable (PSI2C pi2c)
-{
- i2c_clear (pi2c);
-
- pi2c->cr &= I2C_CTL_EN; /* Disable I2c */
-
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Clear - Clear the I2C Controller
- *
- */
-STATUS i2c_clear (PSI2C pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-
-STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet)
-{
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
-#if 1
- UINT8 tmp = 0;
-#endif
- UINT8 Addr = pi2cSet->slv_adr;
-
- pi2c->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (chk_status (pi2c, I2C_STA_BB, 1) != OK)
- return ERROR;
-
- /* Write slave address */
- if (i2c_writebyte (pi2c, &Addr) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#ifdef TWOBYTES
-# if 0
- /* Issue the offset to start */
- if (i2c_write2byte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
- tmp = (ByteOffset >> 8) & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
- tmp = ByteOffset & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#else
- if (i2c_writebyte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
-
- return (OK);
-}
-
-STATUS i2c_stop (PSI2C pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * Read Len bytes to the location pointed to by *Data from the device
- * with address Addr.
- */
-int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int i = 0;
- UINT8 Tmp;
-
-/* UINT8 ByteOffset = pi2cSet->str_adr; not used? */
- UINT8 Addr = pi2cSet->slv_adr;
- int Length = pi2cSet->xfer_size;
-
- I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n",
- Addr, (int) Data, Length, ByteOffset, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) { /* Check if Arbitration lost */
- I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear Arbitration status bit */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- pi2c->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- Tmp = Addr | 1;
-
- if (i2c_writebyte (pi2c, &Tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- pi2c->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (i2c_readbyte (pi2c, &Tmp, &i) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2c->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (i2c_readbyte (pi2c, Data, &Length) != OK) {
- return i2c_stop (pi2c);
- }
- i++;
- Length--;
- Data++;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- return i;
-}
-
-STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int Length = pi2cSet->xfer_size;
-
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
- int j, k;
-
- I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) {
- /* Check if arbitration lost */
- I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear the condition */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- /* Do the not even offset first */
- if ((ByteOffset % 8) != 0) {
- int remain;
-
- if (Length > 8) {
- remain = 8 - (ByteOffset % 8);
- Length -= remain;
-
- pi2cSet->str_adr = ByteOffset;
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- for (j = ByteOffset; j < remain; j++) {
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (32);
-
- /* Update the new ByteOffset */
- ByteOffset += remain;
- }
- }
-
- for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) {
- if ((j % 8) == 0) {
- pi2cSet->str_adr = j;
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
- }
-
- k++;
-
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
-
- if ((j == (Length - 1)) || ((k % 8) == 0)) {
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (50);
- }
-
- }
-
- return k;
-}
-
-STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-
-STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2c->dr = *writeb; /* Write a byte */
-
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
-
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
-
- return OK;
-}
-
-STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
-{
- UINT8 data;
-
- data = (UINT8) ((*writeb >> 8) & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- data = (UINT8) (*writeb & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- return OK;
-}
-
-/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
-FDR FDR scl sda scl2tap2
-510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5
-000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0
-000 001 9 3 4 2 44 Clocks 11 Clocks 758 KHz 0 0 1 0 0 0
-000 010 9 3 6 4 80 Clocks 17 Clocks 417 KHz 0 0 0 1 0 0
-000 011 9 3 6 8 144 Clocks 25 Clocks 231 KHz 0 0 1 1 0 0
-000 100 9 3 14 16 288 Clocks 49 Clocks 116 KHz 0 0 0 0 1 0
-000 101 9 3 30 32 576 Clocks 97 Clocks 58 KHz 0 0 1 0 1 0
-000 110 9 3 62 64 1152 Clocks 193 Clocks 29 KHz 0 0 0 1 1 0
-000 111 9 3 126 128 2304 Clocks 385 Clocks 14 KHz 0 0 1 1 1 0
-001 000 10 3 4 1 30 Clocks 9 Clocks 1111 KHz1 0 0 0 0 0
-001 001 10 3 4 2 48 Clocks 11 Clocks 694 KHz 1 0 1 0 0 0
-001 010 10 3 6 4 88 Clocks 17 Clocks 379 KHz 1 0 0 1 0 0
-001 011 10 3 6 8 160 Clocks 25 Clocks 208 KHz 1 0 1 1 0 0
-001 100 10 3 14 16 320 Clocks 49 Clocks 104 KHz 1 0 0 0 1 0
-001 101 10 3 30 32 640 Clocks 97 Clocks 52 KHz 1 0 1 0 1 0
-001 110 10 3 62 64 1280 Clocks 193 Clocks 26 KHz 1 0 0 1 1 0
-001 111 10 3 126 128 2560 Clocks 385 Clocks 13 KHz 1 0 1 1 1 0
-010 000 12 4 4 1 34 Clocks 10 Clocks 980 KHz 0 1 0 0 0 0
-010 001 12 4 4 2 56 Clocks 13 Clocks 595 KHz 0 1 1 0 0 0
-010 010 12 4 6 4 104 Clocks 21 Clocks 321 KHz 0 1 0 1 0 0
-010 011 12 4 6 8 192 Clocks 33 Clocks 174 KHz 0 1 1 1 0 0
-010 100 12 4 14 16 384 Clocks 65 Clocks 87 KHz 0 1 0 0 1 0
-010 101 12 4 30 32 768 Clocks 129 Clocks 43 KHz 0 1 1 0 1 0
-010 110 12 4 62 64 1536 Clocks 257 Clocks 22 KHz 0 1 0 1 1 0
-010 111 12 4 126 128 3072 Clocks 513 Clocks 11 KHz 0 1 1 1 1 0
-011 000 15 4 4 1 40 Clocks 10 Clocks 833 KHz 1 1 0 0 0 0
-011 001 15 4 4 2 68 Clocks 13 Clocks 490 KHz 1 1 1 0 0 0
-011 010 15 4 6 4 128 Clocks 21 Clocks 260 KHz 1 1 0 1 0 0
-011 011 15 4 6 8 240 Clocks 33 Clocks 139 KHz 1 1 1 1 0 0
-011 100 15 4 14 16 480 Clocks 65 Clocks 69 KHz 1 1 0 0 1 0
-011 101 15 4 30 32 960 Clocks 129 Clocks 35 KHz 1 1 1 0 1 0
-011 110 15 4 62 64 1920 Clocks 257 Clocks 17 KHz 1 1 0 1 1 0
-011 111 15 4 126 128 3840 Clocks 513 Clocks 9 KHz 1 1 1 1 1 0
-100 000 5 1 4 1 20 Clocks 7 Clocks 1667 KHz 0 0 0 0 0 1
-100 001 5 1 4 2 28 Clocks 7 Clocks 1190 KHz 0 0 1 0 0 1
-100 010 5 1 6 4 48 Clocks 9 Clocks 694 KHz 0 0 0 1 0 1
-100 011 5 1 6 8 80 Clocks 9 Clocks 417 KHz 0 0 1 1 0 1
-100 100 5 1 14 16 160 Clocks 17 Clocks 208 KHz 0 0 0 0 1 1
-100 101 5 1 30 32 320 Clocks 33 Clocks 104 KHz 0 0 1 0 1 1
-100 110 5 1 62 64 640 Clocks 65 Clocks 52 KHz 0 0 0 1 1 1
-100 111 5 1 126 128 1280 Clocks 129 Clocks 26 KHz 0 0 1 1 1 1
-101 000 6 1 4 1 22 Clocks 7 Clocks 1515 KHz 1 0 0 0 0 1
-101 001 6 1 4 2 32 Clocks 7 Clocks 1042 KHz 1 0 1 0 0 1
-101 010 6 1 6 4 56 Clocks 9 Clocks 595 KHz 1 0 0 1 0 1
-101 011 6 1 6 8 96 Clocks 9 Clocks 347 KHz 1 0 1 1 0 1
-101 100 6 1 14 16 192 Clocks 17 Clocks 174 KHz 1 0 0 0 1 1
-101 101 6 1 30 32 384 Clocks 33 Clocks 87 KHz 1 0 1 0 1 1
-101 110 6 1 62 64 768 Clocks 65 Clocks 43 KHz 1 0 0 1 1 1
-101 111 6 1 126 128 1536 Clocks 129 Clocks 22 KHz 1 0 1 1 1 1
-110 000 7 2 4 1 24 Clocks 8 Clocks 1389 KHz 0 1 0 0 0 1
-110 001 7 2 4 2 36 Clocks 9 Clocks 926 KHz 0 1 1 0 0 1
-110 010 7 2 6 4 64 Clocks 13 Clocks 521 KHz 0 1 0 1 0 1
-110 011 7 2 6 8 112 Clocks 17 Clocks 298 KHz 0 1 1 1 0 1
-110 100 7 2 14 16 224 Clocks 33 Clocks 149 KHz 0 1 0 0 1 1
-110 101 7 2 30 32 448 Clocks 65 Clocks 74 KHz 0 1 1 0 1 1
-110 110 7 2 62 64 896 Clocks 129 Clocks 37 KHz 0 1 0 1 1 1
-110 111 7 2 126 128 1792 Clocks 257 Clocks 19 KHz 0 1 1 1 1 1
-111 000 8 2 4 1 26 Clocks 8 Clocks 1282 KHz 1 1 0 0 0 1
-111 001 8 2 4 2 40 Clocks 9 Clocks 833 KHz 1 1 1 0 0 1
-111 010 8 2 6 4 72 Clocks 13 Clocks 463 KHz 1 1 0 1 0 1
-111 011 8 2 6 8 128 Clocks 17 Clocks 260 KHz 1 1 1 1 0 1
-111 100 8 2 14 16 256 Clocks 33 Clocks 130 KHz 1 1 0 0 1 1
-111 101 8 2 30 32 512 Clocks 65 Clocks 65 KHz 1 1 1 0 1 1
-111 110 8 2 62 64 1024 Clocks 129 Clocks 33 KHz 1 1 0 1 1 1
-111 111 8 2 126 128 2048 Clocks 257 Clocks 16 KHz 1 1 1 1 1 1
-*/
-STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate)
-{
-/* Constants */
- const UINT8 div_hold[8][3] = { {9, 3}, {10, 3},
- {12, 4}, {15, 4},
- {5, 1}, {6, 1},
- {7, 2}, {8, 2}
- };
-
- const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2},
- {6, 4}, {6, 8},
- {14, 16}, {30, 32},
- {62, 64}, {126, 128}
- };
-
- UINT8 mfdr_bits;
-
- int i = 0;
- int j = 0;
-
- int Diff, min;
- int WhichFreq, iRec, jRec;
- int SCL_Period;
- int SCL_Hold;
- int I2C_Freq;
-
- I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n",
- bitrate, (int) pi2cRegs, 0, 0, 0, 0));
-
- if (bitrate < 0) {
- I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0));
- return ERROR;
- }
-
- /* Initialize */
- mfdr_bits = 0;
- min = 0x7fffffff;
- WhichFreq = iRec = jRec = 0;
-
- for (i = 0; i < 8; i++) {
- for (j = 0; j < 8; j++) {
- /* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2)
- * SCL Hold = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3
- * Bit Rate (I2C Freq) = System Freq / SCL Period
- */
- SCL_Period =
- 2 * (scl_tap[i][0] +
- ((div_hold[j][0] - 1) * scl_tap[i][1]) +
- 2);
-
- /* Now get the I2C Freq */
- I2C_Freq = DEV_CLOCK_FREQ / SCL_Period;
-
- /* Take equal or slower */
- if (I2C_Freq > bitrate)
- continue;
-
- /* Take the differences */
- Diff = I2C_Freq - bitrate;
-
- Diff = ABS (Diff);
-
- /* Find the closer value */
- if (Diff < min) {
- min = Diff;
- WhichFreq = I2C_Freq;
- iRec = i;
- jRec = j;
- }
-
- I2CCDBG (L2,
- ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n",
- i, j, I2C_Freq, Diff, min, 0));
- }
- }
-
- SCL_Period =
- 2 * (scl_tap[iRec][0] +
- ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2);
-
- I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n",
- min, WhichFreq, iRec, jRec, 0, 0));
- I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n",
- scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1],
- 0, 0, 0));
-
- /* This may no require */
- SCL_Hold =
- scl_tap[iRec][0] +
- ((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3;
- I2CCDBG (L2,
- ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0,
- 0, 0, 0));
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- /* FDR 4,3,2 */
- if ((iRec & 1) == 1)
- mfdr_bits |= 0x04; /* FDR 2 */
- if ((iRec & 2) == 2)
- mfdr_bits |= 0x08; /* FDR 3 */
- if ((iRec & 4) == 4)
- mfdr_bits |= 0x10; /* FDR 4 */
- /* FDR 5,1,0 */
- if ((jRec & 1) == 1)
- mfdr_bits |= 0x01; /* FDR 0 */
- if ((jRec & 2) == 2)
- mfdr_bits |= 0x02; /* FDR 1 */
- if ((jRec & 4) == 4)
- mfdr_bits |= 0x20; /* FDR 5 */
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- pi2cRegs->fdr = mfdr_bits;
-
- return OK;
-}
+++ /dev/null
-/*
- * i2cCore.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCi2ccoreh
-#define __INCi2ccoreh
-#ifndef __ASSEMBLY__
-/* device types */
-#define I2C_DEVICE_TYPE_EEPROM 0
-#define I2C_EEPROM_ADRS 0xa0
-#define I2C_CTRL_ADRS I2C_EEPROM_ADRS
-#define EEPROM_ADDR0 0xA2 /* on Dimm SPD eeprom */
-#define EEPROM_ADDR1 0xA4 /* on Board SPD eeprom */
-#define EEPROM_ADDR2 0xD2 /* non-standard eeprom - clock generator */
-/* Control Register */
-#define I2C_CTL_EN 0x80 /* I2C Enable */
-#define I2C_CTL_IEN 0x40 /* I2C Interrupt Enable */
-#define I2C_CTL_STA 0x20 /* Master/Slave Mode select */
-#define I2C_CTL_TX 0x10 /* Transmit/Receive Mode Select */
-#define I2C_CTL_TXAK 0x08 /* Transmit Acknowledge Enable */
-#define I2C_CTL_RSTA 0x04 /* Repeat Start */
-/* Status Register */
-#define I2C_STA_CF 0x80 /* Data Transfer */
-#define I2C_STA_AAS 0x40 /* Adressed As Slave */
-#define I2C_STA_BB 0x20 /* Bus Busy */
-#define I2C_STA_AL 0x10 /* Arbitration Lost */
-#define I2C_STA_SRW 0x04 /* Slave Read/Write */
-#define I2C_STA_IF 0x02 /* I2C Interrupt */
-#define I2C_STA_RXAK 0x01 /* Receive Acknowledge */
-/* Interrupt Contol Register */
-#define I2C_INT_BNBE2 0x80 /* Bus Not Busy Enable 2 */
-#define I2C_INT_TE2 0x40 /* Transmit Enable 2 */
-#define I2C_INT_RE2 0x20 /* Receive Enable 2 */
-#define I2C_INT_IE2 0x10 /* Interrupt Enable 2 */
-#define I2C_INT_BNBE1 0x08 /* Bus Not Busy Enable 1 */
-#define I2C_INT_TE1 0x04 /* Transmit Enable 1 */
-#define I2C_INT_RE1 0x02 /* Receive Enable 1 */
-#define I2C_INT_IE1 0x01 /* Interrupt Enable 1 */
-#define I2C_POLL_COUNT 0x100000
-#define I2C_ENABLE 0x00000001
-#define I2C_DISABLE 0x00000002
-#define I2C_START 0x00000004
-#define I2C_REPSTART 0x00000008
-#define I2C_STOP 0x00000010
-#define I2C_BITRATE 0x00000020
-#define I2C_SLAVEADR 0x00000040
-#define I2C_STARTADR 0x00000080
-#undef TWOBYTES
-typedef struct i2c_settings {
- /* Device settings */
- int bit_rate; /* Device bit rate */
- u8 i2c_adr; /* I2C address */
- u8 slv_adr; /* Slave address */
-#ifdef TWOBYTES
- u16 str_adr; /* Start address */
-#else
- u8 str_adr; /* Start address */
-#endif
- int xfer_size; /* Transfer Size */
-
- int bI2c_en; /* Enable or Disable */
- int cmdFlag; /* I2c Command Flags */
-} i2cset_t;
-
-/*
-int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse);
-int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_disable(PSI2C pi2c);
-int i2c_start(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_stop(PSI2C pi2c);
-int i2c_clear(PSI2C pi2c);
-int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index);
-int i2c_writebyte(PSI2C pi2c, u8 *writeb);
-int SetI2cFDR( PSI2C pi2cRegs, int bitrate );
-*/
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCi2ccoreh */
+++ /dev/null
-/*
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-int interrupt_init_cpu (ulong * decrementer_count)
-{
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- puts ("external_interrupt (oops!)\n");
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- puts ("IRQ related functions are unimplemented currently.\n");
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Multichannel DMA microcode */
-extern int taskTable;
-
-void loadtask (int basetask, int tasks)
-{
- int *sram = (int *) (MMAP_SRAM + 512);
- int *task_org = &taskTable;
- unsigned int start, offset, end;
- int i;
-
-#ifdef DEBUG
- printf ("basetask = %d, tasks = %d\n", basetask, tasks);
- printf ("task_org = 0x%08x\n", (unsigned int) task_org);
-#endif
-
- /* setup TaskBAR register */
- *(vu_long *) MMAP_DMA = (MMAP_SRAM + 512);
-
- /* relocate task table entries */
- offset = (unsigned int) sram;
- for (i = basetask; i < basetask + tasks; i++) {
- sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
- sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
- sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
- sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
- sram[i * 8 + 4] = task_org[i * 8 + 4];
- sram[i * 8 + 5] = task_org[i * 8 + 5];
- sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
- sram[i * 8 + 7] = task_org[i * 8 + 7];
- }
-
- /* relocate task descriptors */
- start = (sram[basetask * 8] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram);
-
-#ifdef DEBUG
- printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
- start /= 4;
- end /= 4;
- for (i = start; i <= end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate variables */
- start = (sram[basetask * 8 + 2] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate function decriptors */
- start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram);
- end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- asm volatile ("sync");
-}
+++ /dev/null
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC8220 PCI Bridge
- */
-#include <common.h>
-#include <mpc8220.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_PCI)
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op) *val = op((type)(addr));
-#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask) \
-int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- u32 addr = 0; \
- u16 cfg_type = 0; \
- addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
- out_be32(hose->cfg_addr, addr); \
- __asm__ __volatile__("sync"); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- __asm__ __volatile__("sync"); \
- return 0; \
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 *val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
-void
-pci_mpc8220_init(struct pci_controller *hose)
-{
- u32 win0, win1, win2;
- volatile mpc8220_xcpci_t *xcpci =
- (volatile mpc8220_xcpci_t *) MMAP_XCPCI;
-
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
-
- win0 = (u32) CONFIG_PCI_MEM_PHYS;
- win1 = (u32) CONFIG_PCI_IO_PHYS;
- win2 = (u32) CONFIG_PCI_CFG_PHYS;
-
- /* Assert PCI reset */
- out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
-
- /* Disable prefetching but read-multiples will still prefetch */
- out_be32 (&xcpci->target_ctrl, 0x00000000);
-
- /* Initiator windows */
- out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000);
- out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
- out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
-
- out_be32 (&xcpci->init_win_cfg,
- PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
- PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
- PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
-
- out_be32 (&xcpci->init_ctrl, 0x00000000);
-
- /* Enable bus master and mem access */
- out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
-
- /* Cache line size and master latency */
- out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-
- out_be32 (&xcpci->target_bar0,
- PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
- out_be32 (&xcpci->target_bar1,
- PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
-
- /* Deassert reset bit */
- out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
-
- /* Enable PCI bus master support */
- /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
- PCIREQ2, PCIGNT2 */
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0,
- CONFIG_PCI_MEM_BUS,
- CONFIG_PCI_MEM_PHYS,
- CONFIG_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_PCI_IO_BUS,
- CONFIG_PCI_IO_PHYS,
- CONFIG_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- pci_set_region(hose->regions + 2,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 3;
-
- hose->cfg_addr = &(xcpci->cfg_adr);
- hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
-
- pci_set_ops(hose,
- mpc8220_pci_read_config_byte,
- mpc8220_pci_read_config_word,
- mpc8220_pci_read_config_dword,
- mpc8220_pci_write_config_byte,
- mpc8220_pci_write_config_word,
- mpc8220_pci_write_config_dword);
-
- /* Hose scan */
- pci_register_hose(hose);
- hose->last_busno = pci_hose_scan(hose);
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-}
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct pllmultiplier {
- u8 hid1;
- int multi;
- int vco_div;
-} pllcfg_t;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- pllcfg_t bus2core[] = {
- {0x02, 2, 8}, /* 1 */
- {0x01, 2, 4},
- {0x0C, 3, 8}, /* 1.5 */
- {0x00, 3, 4},
- {0x18, 3, 2},
- {0x05, 4, 4}, /* 2 */
- {0x04, 4, 2},
- {0x11, 5, 4}, /* 2.5 */
- {0x06, 5, 2},
- {0x10, 6, 4}, /* 3 */
- {0x08, 6, 2},
- {0x0E, 7, 2}, /* 3.5 */
- {0x0A, 8, 2}, /* 4 */
- {0x07, 9, 2}, /* 4.5 */
- {0x0B, 10, 2}, /* 5 */
- {0x09, 11, 2}, /* 5.5 */
- {0x0D, 12, 2}, /* 6 */
- {0x12, 13, 2}, /* 6.5 */
- {0x14, 14, 2}, /* 7 */
- {0x16, 15, 2}, /* 7.5 */
- {0x1C, 16, 2} /* 8 */
- };
- u32 hid1;
- int i, size, pci2bus;
-
-#if !defined(CONFIG_SYS_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
-#endif
-
- gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* Read XLB to PCI(INP) clock multiplier */
- pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
- PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
-
- /* XLB bus clock */
- gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
-
- /* PCI clock is same as input clock */
- gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* FlexBus is temporary set as the same as input clock */
- /* will do dynamic in the future */
- gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* CPU Clock - Read HID1 */
- asm volatile ("mfspr %0, 1009":"=r" (hid1):);
-
- size = sizeof (bus2core) / sizeof (pllcfg_t);
-
- hid1 >>= 27;
-
- for (i = 0; i < size; i++)
- if (hid1 == bus2core[i].hid1) {
- gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
- gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
- break;
- }
-
- /* hardcoded 81MHz for now */
- gd->pev_clk = 81000000;
-
- return (0);
-}
-
-int prt_mpc8220_clks (void)
-{
- char buf1[32], buf2[32], buf3[32], buf4[32];
-
- printf (" Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
- strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->cpu_clk),
- strmhz(buf3, gd->pci_clk),
- strmhz(buf4, gd->vco_clk)
- );
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC8220 CPUs
- */
-#include <config.h>
-#include <mpc8220.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
- mfmsr r5 /* save msr contents */
-
- /* replace default MBAR base address from 0x80000000
- to 0xf0000000 */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
-
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- mtspr SPRN_SPRG7W,r3
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC8220 processor core */
- /*--------------------------------------------------------------*/
-
- bl init_8220_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the MPC8220 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_8220_core
-init_8220_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* Enable Extra BATs */
- mfspr r3, 1011 /* HID2 */
- lis r4, 0x0004
- ori r4, r4, 0x0000
- or r4, r4, r3
- mtspr 1011, r4
- sync
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- lis r4, 0
- ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */
- rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 17, 15 /* clear the ICE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit */
- rlwinm r3, r4, 0, 22, 20 /* clear the DCFI bit */
-
- /* Enable address translation in MSR bit */
- mfmsr r5
- ori r5, r5, 0x
-
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Data Cache & Inval cache*/
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 18, 16 /* clear the DCE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table (unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void print_backtrace (unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf ("Call backtrace: ");
- while (sp) {
- if ((uint) sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf ("\n");
- printf ("%08lX ", i);
- if (cnt > 32)
- break;
- sp = (unsigned long *) *sp;
- }
- printf ("\n");
-}
-
-void show_regs (struct pt_regs *regs)
-{
- int i;
-
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr,
- regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
- regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
-
- printf ("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
- }
-
- printf ("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf ("\n");
- }
- }
-}
-
-
-void _exception (int signr, struct pt_regs *regs)
-{
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void MachineCheckException (struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table (regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
-
- printf ("Machine check in kernel mode.\n");
- printf ("Caused by (from msr): ");
- printf ("regs %p ", regs);
- /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
- switch (regs->msr & 0x000F0000) {
- case (0x80000000 >> 12):
- printf ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000 >> 13):
- printf ("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- printf ("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- printf ("Address parity signal\n");
- break;
- default:
- printf ("Unknown values in msr\n");
- }
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("machine check");
-}
-
-void AlignmentException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Alignment Exception");
-}
-
-void ProgramCheckException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Program Check Exception");
-}
-
-void SoftEmuException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Software Emulation Exception");
-}
-
-
-void UnknownException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint (struct pt_regs *);
-#endif
-
-void DebugException (struct pt_regs *regs)
-{
-
- printf ("Debugger trap at @ %lx\n", regs->nip);
- show_regs (regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint (regs);
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe (uint * addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__ ("1: lwz %0,0(%1)\n"
- " eieio\n"
- " li %0,0\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: li %0,-1\n"
- " b 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 2\n"
- " .long 1b,3b\n"
- ".text":"=r" (retval):"r" (addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc8220/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PSC_BASE MMAP_PSC1
-
-#if defined(CONFIG_PSC_CONSOLE)
-int serial_init (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
- psc->cr = 0;
- psc->ipcr_acr = 0;
- psc->isr_imr = 0;
-
- /* write to CSR: RX/TX baud rate from timers */
- psc->sr_csr = 0xdd000000;
-
- psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1;
-
- /* Setting up BaudRate */
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
- psc->cr = PSC_CR_RST_ERR_STS_CMD;
- psc->cr = PSC_CR_RST_BRK_INT_CMD;
- psc->cr = PSC_CR_RST_MR_PTR_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
- return (0);
-}
-
-void serial_putc (const char c)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- if (c == '\n')
- serial_putc ('\r');
-
- /* Wait for last character to go. */
- while (!(psc->sr_csr & PSC_SR_TXRDY));
-
- psc->xmitbuf[0] = c;
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- /* Wait for a character to arrive. */
- while (!(psc->sr_csr & PSC_SR_RXRDY));
- return psc->xmitbuf[2];
-}
-
-int serial_tstc (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- return (psc->sr_csr & PSC_SR_RXRDY);
-}
-
-void serial_setbrg (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
-}
-#endif /* CONFIG_PSC_CONSOLE */
+++ /dev/null
-/bedbug_603e.c
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)drivers/epic)
-$(shell mkdir -p $(obj)drivers/i2c)
-endif
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
- drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
-COBJS_LN = bedbug_603e.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-$(obj)bedbug_603e.c:
- ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc824x/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mpc824x.h>
-#include <common.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- unsigned int pvr = get_pvr ();
- unsigned int version = pvr >> 16;
- unsigned char revision;
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- switch (version) {
- case CPU_TYPE_8240:
- puts ("MPC8240");
- break;
-
- case CPU_TYPE_8245:
- puts ("MPC8245");
- break;
-
- default:
- return -1; /*not valid for this source */
- }
-
- CONFIG_READ_BYTE (REVID, revision);
-
- if (revision) {
- printf (" Revision %d.%d",
- (revision & 0xf0) >> 4,
- (revision & 0x0f));
- } else {
- return -1; /* no valid CPU revision info */
- }
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- puts ("\n");
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int checkicache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int checkdcache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-
-};
-
-/*------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- /* Interrupts and MMU off */
- __asm__ ("mtspr 81, 0");
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~0x1030;
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on
- * your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- * This is the sys_logic_clk (memory bus) divided by 4
- */
-unsigned long get_tbclk (void)
-{
- return ((get_bus_freq (0) + 2L) / 4L);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * The MPC824x has an integrated PCI controller known as the MPC107.
- * The following are MPC107 Bridge Controller and PCI Support functions
- *
- */
-
-/*
- * This procedure reads a 32-bit address MPC107 register, and returns
- * a 32 bit value. It swaps the address to little endian before
- * writing it to config address, and swaps the value to big endian
- * before returning to the caller.
- */
-unsigned int mpc824x_mpc107_getreg (unsigned int regNum)
-{
- unsigned int temp;
-
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- temp = *(volatile unsigned int *) CHRP_REG_DATA;
- return PCISWAP (temp); /* swap the data upon return */
-}
-
-/*
- * This procedure writes a 32-bit address MPC107 register. It swaps
- * the address to little endian before writing it to config address.
- */
-
-void mpc824x_mpc107_setreg (unsigned int regNum, unsigned int regVal)
-{
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- *(volatile unsigned int *) CHRP_REG_DATA = PCISWAP (regVal);
- return;
-}
-
-
-/*
- * Write a byte (8 bits) to a memory location.
- */
-void mpc824x_mpc107_write8 (unsigned int addr, unsigned char data)
-{
- *(unsigned char *) addr = data;
- __asm__ ("sync");
-}
-
-/*
- * Write a word (16 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write16 (unsigned int address, unsigned short data)
-{
- *(volatile unsigned short *) address = BYTE_SWAP_16_BIT (data);
- __asm__ ("sync");
-}
-
-/*
- * Write a long word (32 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write32 (unsigned int address, unsigned int data)
-{
- *(volatile unsigned int *) address = LONGSWAP (data);
- __asm__ ("sync");
-}
-
-/*
- * Read a byte (8 bits) from a memory location.
- */
-unsigned char mpc824x_mpc107_read8 (unsigned int addr)
-{
- return *(volatile unsigned char *) addr;
-}
-
-
-/*
- * Read a word (16 bits) from a memory location, and byte swap the
- * value before returning to the caller.
- */
-unsigned short mpc824x_mpc107_read16 (unsigned int address)
-{
- unsigned short retVal;
-
- retVal = BYTE_SWAP_16_BIT (*(unsigned short *) address);
- return retVal;
-}
-
-
-/*
- * Read a long word (32 bits) from a memory location, and byte
- * swap the value before returning to the caller.
- */
-unsigned int mpc824x_mpc107_read32 (unsigned int address)
-{
- unsigned int retVal;
-
- retVal = LONGSWAP (*(unsigned int *) address);
- return (retVal);
-}
-
-
-/*
- * Read a register in the Embedded Utilities Memory Block address
- * space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register number
- * being passed is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * Output: The 32 bit little endian value of the register.
- */
-
-unsigned int mpc824x_eummbar_read (unsigned int regNum)
-{
- unsigned int temp;
-
- temp = *(volatile unsigned int *) (EUMBBAR_VAL + regNum);
- temp = PCISWAP (temp);
- return temp;
-}
-
-
-/*
- * Write a value to a register in the Embedded Utilities Memory
- * Block address space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register
- * number is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * regVal - value to be written to the register.
- */
-
-void mpc824x_eummbar_write (unsigned int regNum, unsigned int regVal)
-{
- *(volatile unsigned int *) (EUMBBAR_VAL + regNum) = PCISWAP (regVal);
- return;
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <mpc824x.h>
-
-#ifndef CONFIG_SYS_BANK0_ROW
-#define CONFIG_SYS_BANK0_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK1_ROW
-#define CONFIG_SYS_BANK1_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK2_ROW
-#define CONFIG_SYS_BANK2_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK3_ROW
-#define CONFIG_SYS_BANK3_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK4_ROW
-#define CONFIG_SYS_BANK4_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK5_ROW
-#define CONFIG_SYS_BANK5_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK6_ROW
-#define CONFIG_SYS_BANK6_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK7_ROW
-#define CONFIG_SYS_BANK7_ROW 0
-#endif
-#ifndef CONFIG_SYS_DBUS_SIZE2
-#define CONFIG_SYS_DBUS_SIZE2 0
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- */
-void
-cpu_init_f (void)
-{
-/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
- register unsigned long val;
- CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
-/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
-
-#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62)
-/* Why is this here, you ask? Try, just try setting 0x8000
- * in PCIACR with CONFIG_WRITE_HALFWORD()
- * this one was a stumper, and we are annoyed
- */
-
-#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
- __asm__ __volatile__(" \
- stw %2,0(%0)\n \
- sync\n \
- sth %3,2(%1)\n \
- sync\n \
- " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
- "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
- );
-
- M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
-#endif
-
- CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
- CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
- /*
- * Note that although this bit is cleared after a hard reset, it
- * must be explicitly set and then cleared by software during
- * initialization in order to guarantee correct operation of the
- * DLL and the SDRAM_CLK[0:3] signals (if they are used).
- */
- CONFIG_READ_BYTE (AMBOR, val);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
- CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
-#ifdef CONFIG_MPC8245
- /* silicon bug 28 MPC8245 */
- CONFIG_READ_BYTE(AMBOR,val);
- CONFIG_WRITE_BYTE(AMBOR,val|0x1);
-
-#if 0
- /*
- * The following bug only affects older (XPC8245) processors.
- * DMA transfers initiated by external devices get corrupted due
- * to a hardware scheduling problem.
- *
- * The effect is:
- * when transferring X words, the first 32 words are transferred
- * OK, the next 3 x 32 words are 'old' data (from previous DMA)
- * while the rest of the X words is xferred fine.
- *
- * Disabling 3 of the 4 32 word hardware buffers solves the problem
- * with no significant performance loss.
- */
-
- CONFIG_READ_BYTE(PCMBCR,val);
- /* in order not to corrupt data which is being read over the PCI bus
- * with the PPC as slave, we need to reduce the number of PCMRBs to 1,
- * 4.11 in the processor user manual
- * */
-
-#if 1
- CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
-#else
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
- /* default, 4 PCMRBs are used */
-#endif
-#endif
-#endif
-
- CONFIG_READ_WORD(PICR1, val);
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
- PIRC1_MSK | PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_EN_PCS |
- PICR1_CF_APARK );
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_RCS0)) |
- PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
- PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_READ_WORD(PICR2, val);
- val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
-#ifndef CONFIG_PN62
- val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
-#endif
- CONFIG_WRITE_WORD(PICR2, val);
-
- CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
-#ifndef CONFIG_SYS_RAMBOOT
- CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
- (CONFIG_SYS_BANK0_ROW) |
- (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
- (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
- (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
- (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
- (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
- (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
- (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
- (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
-#endif
-
-#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
- CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
- CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
-#else
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
-#endif
-
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
- (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT));
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-/* this is gross. We think these should all be the same, and various boards
- * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
- * its not set, we define it to zero in this file
- */
-#if defined(CONFIG_CU824) || defined(CONFIG_PN62)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
-#elif defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#elif defined(CONFIG_MPC8245)
- CONFIG_READ_WORD(MCCR1, val);
- val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
-
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- (CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
- (CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_WRITE_WORD(MSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-
- CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
-#ifdef CONFIG_SYS_DLL_MAX_DELAY
- CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */
-#endif
-#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
- CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
-#endif
-#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
- CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */
-#endif /* setup & hold time */
-
- CONFIG_WRITE_BYTE(MBER,
- CONFIG_SYS_BANK0_ENABLE |
- (CONFIG_SYS_BANK1_ENABLE << 1) |
- (CONFIG_SYS_BANK2_ENABLE << 2) |
- (CONFIG_SYS_BANK3_ENABLE << 3) |
- (CONFIG_SYS_BANK4_ENABLE << 4) |
- (CONFIG_SYS_BANK5_ENABLE << 5) |
- (CONFIG_SYS_BANK6_ENABLE << 6) |
- (CONFIG_SYS_BANK7_ENABLE << 7));
-
-#ifdef CONFIG_SYS_PGMAX
- CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
-#endif
-
- /* ! Wait 200us before initialize other registers */
- /*FIXME: write a decent udelay wait */
- __asm__ __volatile__(
- " mtctr %0 \n \
- 0: bdnz 0b\n"
- :
- : "r" (0x10000));
-
- CONFIG_READ_WORD(MCCR1, val);
- CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
- __asm__ __volatile__("eieio");
-
-#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
-}
-
-
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
-struct MPC107_s {
- unsigned int iobase;
- char desc[120];
-} MPC107Regs[] = {
- { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" },
- { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" },
- { BMC_BASE + 0x08, "MPC107 Revision" },
- { BMC_BASE + 0x0C, "MPC107 Cache Line Size" },
- { BMC_BASE + 0x10, "MPC107 LMBAR" },
- { BMC_BASE + 0x14, "MPC824x PCSR" },
- { BMC_BASE + 0xA8, "MPC824x PICR1" },
- { BMC_BASE + 0xAC, "MPC824x PICR2" },
- { BMC_BASE + 0x46, "MPC824x PACR" },
- { BMC_BASE + 0x310, "MPC824x ITWR" },
- { BMC_BASE + 0x300, "MPC824x OMBAR" },
- { BMC_BASE + 0x308, "MPC824x OTWR" },
- { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" },
- { BMC_BASE + 0x78, "MPC107 EUMBAR" },
- { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" },
- { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" },
- { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
- { BMC_BASE + 0xE0, "MPC107 AMBOR Register" },
- { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" },
- { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" },
- { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" },
- { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" },
-};
-#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
- unsigned int tmp = 0, i;
-#endif
- /*
- * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
- * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
- * be accessed.
- */
-
-#ifdef CONFIG_MPC8240 /* only on MPC8240 */
- mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
- /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
- mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
-#endif
-
-
-#ifdef INCLUDE_MPC107_REPORT
- /* Check MPC824x PCI Device and Vendor ID */
- while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
- printf (" MPC107: offset=0x%x, val = 0x%x\n",
- BMC_BASE,
- tmp);
- }
-
- for (i = 0; i < N_MPC107_Regs; i++) {
- printf (" 0x%x/%s = 0x%x\n",
- MPC107Regs[i].iobase,
- MPC107Regs[i].desc,
- mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
- }
-
- printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
- printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
- printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
- printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
- printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
- printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
- printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
- printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
- printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
- printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
- printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
- printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
- printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
- printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
- printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
- printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
- return (0);
-}
+++ /dev/null
-#include "epic/epic.h"
+++ /dev/null
-CONTENT:
-
- epic.h
- epic1.c
- epic2.s
-
-WHAT ARE THESE FILES:
-
-These files contain MPC8240 (Kahlua) EPIC
-driver routines. The driver routines are not
-written for any specific operating system.
-They serves the purpose of code sample, and
-jump-start for using the MPC8240 EPIC unit.
-
-For the reason of correctness of C language
-syntax, these files are compiled by Metaware
-C compiler and assembler.
-
-ENDIAN NOTATION:
-
-The algorithm is designed for big-endian mode,
-software is responsible for byte swapping.
-
-USAGE:
-
-1. The host system that is running on MPC8240
- shall link the files listed here. The memory
- location of driver routines shall take into
- account of that driver routines need to run
- in supervisor mode and they process external
- interrupts.
-
- The routine epic_exception shall be called by
- exception vector at location 0x500, i.e.,
- 603e core external exception vector.
-
-2. The host system is responsible for configuring
- the MPC8240 including Embedded Utilities Memory
- Block. All EPIC driver functions require the
- content of Embedded Utilities Memory Block
- Base Address Register, EUMBBAR, as the first
- parameter.
-
-3. Before EPIC unit of MPC8240 can be used,
- initialize EPIC unit by calling epicInit
- with the corresponding parameters.
-
- The initialization shall disable the 603e
- core External Exception by calling CoreExtIntDisable( ).
- Next, call epicInit( ). Last, enable the 603e core
- External Exception by calling CoreExtIntEnable( ).
-
-4. After EPIC unit has been successfully initialized,
- epicIntSourceSet( ) shall be used to register each
- external interrupt source. Anytime, an external
- interrupt source can be disabled or enabled by
- calling corresponding function, epicIntDisable( ),
- or epicIntEnable( ).
-
- Global Timers' resource, base count and frequency,
- can be changed by calling epicTmFrequencySet( )
- and epicTmBaseSet( ).
-
- To stop counting a specific global timer, use
- the function, epicTmInhibit while epicTmEnable
- can be used to start counting a timer.
-
-5. To mask a set of external interrupts that are
- are certain level below, epicIntPrioritySet( )
- can be used. For example, if the processor's
- current task priority register is set to 0x7,
- only interrupts of priority 0x8 or higher will
- be passed to the processor.
-
- Be careful when using this function. It may
- corrupt the current interrupt pending, selector,
- and request registers, resulting an invalid vetor.
-
- After enabling an interrupt, disable it may also
- cause an invalid vector. User may consider using
- the spurious vector interrupt service routine to
- handle this case.
-
-6. The EPIC driver routines contains a set
- of utilities, Set and Get, for host system
- to query and modify the desired EPIC source
- registers.
-
-7. Each external interrupt source shall register
- its interrupt service routine. The routine
- shall contain all interrupt source specific
- processes and keep as short as possible.
-
- Special customized end of interrupt routine
- is optional. If it is needed, it shall contain
- the external interrupt source specific end of
- interrupt process.
-
- External interrupt exception vector at 0x500
- shall always call the epicEOI just before
- rfi instruction. Refer to the routine,
- epic_exception, for a code sample.
+++ /dev/null
-/*********************************************************************
- * mpc8240epic.h - EPIC module of the MPC8240 micro-controller
- *
- * Copyrigh 1999 Motorola Inc.
- *
- * Modification History:
- * =====================
- * 01a,04Feb99,My Created.
- * 15Nov200, robt -modified to use in U-Boot
- *
-*/
-
-#ifndef __INCEPICh
-#define __INCEPICh
-
-#define ULONG unsigned long
-#define MAXVEC 20
-#define MAXIRQ 5 /* IRQs */
-#define EPIC_DIRECT_IRQ 0 /* Direct interrupt type */
-
-/* EPIC register addresses */
-
-#define EPIC_EUMBBAR 0x40000 /* EUMBBAR of EPIC */
-#define EPIC_FEATURES_REG (EPIC_EUMBBAR + 0x01000)/* Feature reporting */
-#define EPIC_GLOBAL_REG (EPIC_EUMBBAR + 0x01020)/* Global config. */
-#define EPIC_INT_CONF_REG (EPIC_EUMBBAR + 0x01030)/* Interrupt config. */
-#define EPIC_VENDOR_ID_REG (EPIC_EUMBBAR + 0x01080)/* Vendor id */
-#define EPIC_PROC_INIT_REG (EPIC_EUMBBAR + 0x01090)/* Processor init. */
-#define EPIC_SPUR_VEC_REG (EPIC_EUMBBAR + 0x010e0)/* Spurious vector */
-#define EPIC_TM_FREQ_REG (EPIC_EUMBBAR + 0x010f0)/* Timer Frequency */
-
-#define EPIC_TM0_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01100)/* Gbl TM0 Cur. Count*/
-#define EPIC_TM0_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01110)/* Gbl TM0 Base Count*/
-#define EPIC_TM0_VEC_REG (EPIC_EUMBBAR + 0x01120)/* Gbl TM0 Vector Pri*/
-#define EPIC_TM0_DES_REG (EPIC_EUMBBAR + 0x01130)/* Gbl TM0 Dest. */
-
-#define EPIC_TM1_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01140)/* Gbl TM1 Cur. Count*/
-#define EPIC_TM1_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01150)/* Gbl TM1 Base Count*/
-#define EPIC_TM1_VEC_REG (EPIC_EUMBBAR + 0x01160)/* Gbl TM1 Vector Pri*/
-#define EPIC_TM1_DES_REG (EPIC_EUMBBAR + 0x01170)/* Gbl TM1 Dest. */
-
-#define EPIC_TM2_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01180)/* Gbl TM2 Cur. Count*/
-#define EPIC_TM2_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01190)/* Gbl TM2 Base Count*/
-#define EPIC_TM2_VEC_REG (EPIC_EUMBBAR + 0x011a0)/* Gbl TM2 Vector Pri*/
-#define EPIC_TM2_DES_REG (EPIC_EUMBBAR + 0x011b0)/* Gbl TM2 Dest */
-
-#define EPIC_TM3_CUR_COUNT_REG (EPIC_EUMBBAR + 0x011c0)/* Gbl TM3 Cur. Count*/
-#define EPIC_TM3_BASE_COUNT_REG (EPIC_EUMBBAR + 0x011d0)/* Gbl TM3 Base Count*/
-#define EPIC_TM3_VEC_REG (EPIC_EUMBBAR + 0x011e0)/* Gbl TM3 Vector Pri*/
-#define EPIC_TM3_DES_REG (EPIC_EUMBBAR + 0x011f0)/* Gbl TM3 Dest. */
-
-#define EPIC_EX_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Ext. Int. Sr0 Des */
-#define EPIC_EX_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Ext. Int. Sr0 Vect*/
-#define EPIC_EX_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Ext. Int. Sr1 Des */
-#define EPIC_EX_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Ext. Int. Sr1 Vect*/
-#define EPIC_EX_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Ext. Int. Sr2 Des */
-#define EPIC_EX_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Ext. Int. Sr2 Vect*/
-#define EPIC_EX_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Ext. Int. Sr3 Des */
-#define EPIC_EX_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Ext. Int. Sr3 Vect*/
-#define EPIC_EX_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Ext. Int. Sr4 Des */
-#define EPIC_EX_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Ext. Int. Sr4 Vect*/
-
-#define EPIC_SR_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Sr. Int. Sr0 Des */
-#define EPIC_SR_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Sr. Int. Sr0 Vect */
-#define EPIC_SR_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Sr. Int. Sr1 Des */
-#define EPIC_SR_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Sr. Int. Sr1 Vect.*/
-#define EPIC_SR_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Sr. Int. Sr2 Des */
-#define EPIC_SR_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Sr. Int. Sr2 Vect.*/
-#define EPIC_SR_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Sr. Int. Sr3 Des */
-#define EPIC_SR_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Sr. Int. Sr3 Vect.*/
-#define EPIC_SR_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Sr. Int. Sr4 Des */
-#define EPIC_SR_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Sr. Int. Sr4 Vect.*/
-
-#define EPIC_SR_INT5_VEC_REG (EPIC_EUMBBAR + 0x102a0)/* Sr. Int. Sr5 Des */
-#define EPIC_SR_INT5_DES_REG (EPIC_EUMBBAR + 0x102b0)/* Sr. Int. Sr5 Vect.*/
-#define EPIC_SR_INT6_VEC_REG (EPIC_EUMBBAR + 0x102c0)/* Sr. Int. Sr6 Des */
-#define EPIC_SR_INT6_DES_REG (EPIC_EUMBBAR + 0x102d0)/* Sr. Int. Sr6 Vect.*/
-#define EPIC_SR_INT7_VEC_REG (EPIC_EUMBBAR + 0x102e0)/* Sr. Int. Sr7 Des */
-#define EPIC_SR_INT7_DES_REG (EPIC_EUMBBAR + 0x102f0)/* Sr. Int. Sr7 Vect.*/
-#define EPIC_SR_INT8_VEC_REG (EPIC_EUMBBAR + 0x10300)/* Sr. Int. Sr8 Des */
-#define EPIC_SR_INT8_DES_REG (EPIC_EUMBBAR + 0x10310)/* Sr. Int. Sr8 Vect.*/
-#define EPIC_SR_INT9_VEC_REG (EPIC_EUMBBAR + 0x10320)/* Sr. Int. Sr9 Des */
-#define EPIC_SR_INT9_DES_REG (EPIC_EUMBBAR + 0x10330)/* Sr. Int. Sr9 Vect.*/
-
-#define EPIC_SR_INT10_VEC_REG (EPIC_EUMBBAR + 0x10340)/* Sr. Int. Sr10 Des */
-#define EPIC_SR_INT10_DES_REG (EPIC_EUMBBAR + 0x10350)/* Sr. Int. Sr10 Vect*/
-#define EPIC_SR_INT11_VEC_REG (EPIC_EUMBBAR + 0x10360)/* Sr. Int. Sr11 Des */
-#define EPIC_SR_INT11_DES_REG (EPIC_EUMBBAR + 0x10370)/* Sr. Int. Sr11 Vect*/
-#define EPIC_SR_INT12_VEC_REG (EPIC_EUMBBAR + 0x10380)/* Sr. Int. Sr12 Des */
-#define EPIC_SR_INT12_DES_REG (EPIC_EUMBBAR + 0x10390)/* Sr. Int. Sr12 Vect*/
-#define EPIC_SR_INT13_VEC_REG (EPIC_EUMBBAR + 0x103a0)/* Sr. Int. Sr13 Des */
-#define EPIC_SR_INT13_DES_REG (EPIC_EUMBBAR + 0x103b0)/* Sr. Int. Sr13 Vect*/
-#define EPIC_SR_INT14_VEC_REG (EPIC_EUMBBAR + 0x103c0)/* Sr. Int. Sr14 Des */
-#define EPIC_SR_INT14_DES_REG (EPIC_EUMBBAR + 0x103d0)/* Sr. Int. Sr14 Vect*/
-#define EPIC_SR_INT15_VEC_REG (EPIC_EUMBBAR + 0x103e0)/* Sr. Int. Sr15 Des */
-#define EPIC_SR_INT15_DES_REG (EPIC_EUMBBAR + 0x103f0)/* Sr. Int. Sr15 Vect*/
-
-#define EPIC_I2C_INT_VEC_REG (EPIC_EUMBBAR + 0x11020)/* I2C Int. Vect Pri.*/
-#define EPIC_I2C_INT_DES_REG (EPIC_EUMBBAR + 0x11030)/* I2C Int. Dest */
-#define EPIC_DMA0_INT_VEC_REG (EPIC_EUMBBAR + 0x11040)/* DMA0 Int. Vect Pri*/
-#define EPIC_DMA0_INT_DES_REG (EPIC_EUMBBAR + 0x11050)/* DMA0 Int. Dest */
-#define EPIC_DMA1_INT_VEC_REG (EPIC_EUMBBAR + 0x11060)/* DMA1 Int. Vect Pri*/
-#define EPIC_DMA1_INT_DES_REG (EPIC_EUMBBAR + 0x11070)/* DMA1 Int. Dest */
-#define EPIC_MSG_INT_VEC_REG (EPIC_EUMBBAR + 0x110c0)/* Msg Int. Vect Pri*/
-#define EPIC_MSG_INT_DES_REG (EPIC_EUMBBAR + 0x110d0)/* Msg Int. Dest */
-
-#define EPIC_PROC_CTASK_PRI_REG (EPIC_EUMBBAR + 0x20080)/* Proc. current task*/
-#define EPIC_PROC_INT_ACK_REG (EPIC_EUMBBAR + 0x200a0)/* Int. acknowledge */
-#define EPIC_PROC_EOI_REG (EPIC_EUMBBAR + 0x200b0)/* End of interrupt */
-
-#define EPIC_VEC_PRI_MASK 0x80000000 /* Mask Interrupt bit in IVPR */
-#define EPIC_VEC_PRI_DFLT_PRI 8 /* Interrupt Priority in IVPR */
-
-/* Error code */
-
-#define OK 0
-#define ERROR -1
-
-/* function prototypes */
-
-void epicVendorId( unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- );
-void epicFeatures( unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *VerId );
-extern void epicInit( unsigned int IRQType, unsigned int clkRatio);
-ULONG sysEUMBBARRead ( ULONG regNum );
-void sysEUMBBARWrite ( ULONG regNum, ULONG regVal);
-extern void epicTmFrequencySet( unsigned int frq );
-extern unsigned int epicTmFrequencyGet(void);
-extern unsigned int epicTmBaseSet( ULONG srcAddr,
- unsigned int cnt,
- unsigned int inhibit );
-extern unsigned int epicTmBaseGet ( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmInhibit( unsigned int timer );
-extern unsigned int epicTmEnable( ULONG srcAdr );
-extern void CoreExtIntEnable(void); /* Enable 603e external interrupts */
-extern void CoreExtIntDisable(void); /* Disable 603e external interrupts */
-extern unsigned char epicIntTaskGet(void);
-extern void epicIntTaskSet( unsigned char val );
-extern unsigned int epicIntAck(void);
-extern void epicSprSet( unsigned int eumbbar, unsigned char );
-extern void epicConfigGet( unsigned int *clkRatio,
- unsigned int *serEnable );
-extern void SrcVecTableInit(void);
-extern unsigned int epicModeGet(void);
-extern void epicIntEnable(int Vect);
-extern void epicIntDisable(int Vect);
-extern int epicIntSourceConfig(int Vect, int Polarity, int Sense, int Prio);
-extern unsigned int epicIntAck(void);
-extern void epicEOI(void);
-extern int epicCurTaskPrioSet(int Vect);
-
-struct SrcVecTable
- {
- ULONG srcAddr;
- char srcName[40];
- };
-
-#endif /* EPIC_H */
+++ /dev/null
-/**************************************************
- *
- * copyright @ motorola, 1999
- *
- *************************************************/
-#include <mpc824x.h>
-#include <common.h>
-#include "epic.h"
-
-
-#define PRINT(format, args...) printf(format , ## args)
-
-typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */
-struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */
- {
- { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"},
- { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"},
- { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"},
- { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"},
- { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"},
-
- { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"},
- { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"},
- { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"},
- { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"},
- { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"},
- { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"},
- { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"},
- { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"},
- { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"},
- { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"},
- { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"},
-
- { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"},
- { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"},
- { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"},
- { EPIC_MSG_INT_VEC_REG, "Internal Message Source"},
- };
-
-VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */
-
-
-/****************************************************************************
-* epicInit - Initialize the EPIC registers
-*
-* This routine resets the Global Configuration Register, thus it:
-* - Disables all interrupts
-* - Sets epic registers to reset values
-* - Sets the value of the Processor Current Task Priority to the
-* highest priority (0xF).
-* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass
-* Through or 8259 compatible mode).
-*
-* If IRQType (input) is Direct IRQs:
-* - IRQType is written to the SIE bit of the EPIC Interrupt
-* Configuration register (ICR).
-* - clkRatio is ignored.
-* If IRQType is Serial IRQs:
-* - both IRQType and clkRatio will be written to the ICR register
-*/
-
-void epicInit
- (
- unsigned int IRQType, /* Direct or Serial */
- unsigned int clkRatio /* Clk Ratio for Serial IRQs */
- )
- {
- ULONG tmp;
-
- tmp = sysEUMBBARRead(EPIC_GLOBAL_REG);
- tmp |= 0xa0000000; /* Set the Global Conf. register */
- sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp);
- /*
- * Wait for EPIC to reset - CLH
- */
- while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1);
- sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000);
- tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */
-
- if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff);
- else /* Serial mode */
- {
- tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp);
- }
-
- while (epicIntAck() != 0xff) /* Clear all pending interrupts */
- epicEOI();
-}
-
-/****************************************************************************
- * epicIntEnable - Enable an interrupt source
- *
- * This routine clears the mask bit of an external, an internal or
- * a Timer register to enable the interrupt.
- *
- * RETURNS: None
- */
-void epicIntEnable(int intVec)
-{
- ULONG tmp;
- ULONG srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */
- tmp = sysEUMBBARRead(srAddr);
- tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */
- tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */
- tmp |= intVec; /* Set Vector number */
- sysEUMBBARWrite(srAddr, tmp);
-
- return;
- }
-
-/****************************************************************************
- * epicIntDisable - Disable an interrupt source
- *
- * This routine sets the mask bit of an external, an internal or
- * a Timer register to disable the interrupt.
- *
- * RETURNS: OK or ERROR
- *
- */
-
-void epicIntDisable
- (
- int intVec /* Interrupt vector number */
- )
- {
-
- ULONG tmp, srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- tmp |= 0x80000000; /* Set the mask bit */
- sysEUMBBARWrite(srAddr, tmp);
- return;
- }
-
-/****************************************************************************
- * epicIntSourceConfig - Set properties of an interrupt source
- *
- * This function sets interrupt properites (Polarity, Sense, Interrupt
- * Prority, and Interrupt Vector) of an Interrupt Source. The properties
- * can be set when the current source is not in-request or in-service,
- * which is determined by the Activity bit. This routine return ERROR
- * if the the Activity bit is 1 (in-request or in-service).
- *
- * This function assumes that the Source Vector/Priority register (input)
- * is a valid address.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicIntSourceConfig
- (
- int Vect, /* interrupt source vector number */
- int Polarity, /* interrupt source polarity */
- int Sense, /* interrupt source Sense */
- int Prio /* interrupt source priority */
- )
-
- {
- ULONG tmp, newVal;
- ULONG actBit, srAddr;
-
- srAddr = SrcVecTable[Vect].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */
- if (actBit == 1)
- return ERROR;
-
- tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */
- newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect;
- sysEUMBBARWrite(srAddr, tmp | newVal );
- return (OK);
- }
-
-/****************************************************************************
- * epicIntAck - acknowledge an interrupt
- *
- * This function reads the Interrupt acknowldge register and return
- * the vector number of the highest pending interrupt.
- *
- * RETURNS: Interrupt Vector number.
- */
-
-unsigned int epicIntAck(void)
-{
- return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG ));
-}
-
-/****************************************************************************
- * epicEOI - signal an end of interrupt
- *
- * This function writes 0x0 to the EOI register to signal end of interrupt.
- * It is usually called after an interrupt routine is served.
- *
- * RETURNS: None
- */
-
-void epicEOI(void)
- {
- sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0);
- }
-
-/****************************************************************************
- * epicCurTaskPrioSet - sets the priority of the Processor Current Task
- *
- * This function should be called after epicInit() to lower the priority
- * of the processor current task.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicCurTaskPrioSet
- (
- int prioNum /* New priority value */
- )
- {
-
- if ( (prioNum < 0) || (prioNum > 0xF))
- return ERROR;
- sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum);
- return OK;
- }
-
-
-/************************************************************************
- * function: epicIntTaskGet
- *
- * description: Get value of processor current interrupt task priority register
- *
- * note:
- ***********************************************************************/
-unsigned char epicIntTaskGet()
-{
- /* get the interrupt task priority register */
- ULONG reg;
- unsigned char rec;
-
- reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG );
- rec = ( reg & 0x0F );
- return rec;
-}
-
-
-/**************************************************************
- * function: epicISR
- *
- * description: EPIC service routine called by the core exception
- * at 0x500
- *
- * note:
- **************************************************************/
-unsigned int epicISR(void)
-{
- return 0;
-}
-
-
-/************************************************************
- * function: epicModeGet
- *
- * description: query EPIC mode, return 0 if pass through mode
- * return 1 if mixed mode
- *
- * note:
- *************************************************************/
-unsigned int epicModeGet(void)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_GLOBAL_REG );
- return (( val & 0x20000000 ) >> 29);
-}
-
-
-/*********************************************
- * function: epicConfigGet
- *
- * description: Get the EPIC interrupt Configuration
- * return 0 if not error, otherwise return 1
- *
- * note:
- ********************************************/
-void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_INT_CONF_REG );
- *clkRatio = ( val & 0x70000000 ) >> 28;
- *serEnable = ( val & 0x8000000 ) >> 27;
-}
-
-
-/*******************************************************************
- * sysEUMBBARRead - Read a 32-bit EUMBBAR register
- *
- * This routine reads the content of a register in the Embedded
- * Utilities Memory Block, and swaps to big endian before returning
- * the value.
- *
- * RETURNS: The content of the specified EUMBBAR register.
- */
-
-ULONG sysEUMBBARRead
- (
- ULONG regNum
- )
- {
- ULONG temp;
-
- temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
- return ( LONGSWAP(temp));
- }
-
-/*******************************************************************
- * sysEUMBBARWrite - Write a 32-bit EUMBBAR register
- *
- * This routine swaps the value to little endian then writes it to
- * a register in the Embedded Utilities Memory Block address space.
- *
- * RETURNS: N/A
- */
-
-void sysEUMBBARWrite
- (
- ULONG regNum, /* EUMBBAR register address */
- ULONG regVal /* Value to be written */
- )
- {
-
- *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
- return ;
- }
-
-
-/********************************************************
- * function: epicVendorId
- *
- * description: return the EPIC Vendor Identification
- * register:
- *
- * siliccon version, device id, and vendor id
- *
- * note:
- ********************************************************/
-void epicVendorId
- (
- unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- )
- {
- ULONG val;
- val = sysEUMBBARRead( EPIC_VENDOR_ID_REG );
- *step = ( val & 0x00FF0000 ) >> 16;
- *devId = ( val & 0x0000FF00 ) >> 8;
- *venId = ( val & 0x000000FF );
- }
-
-/**************************************************
- * function: epicFeatures
- *
- * description: return the number of IRQ supported,
- * number of CPU, and the version of the
- * OpenEPIC
- *
- * note:
- *************************************************/
-void epicFeatures
- (
- unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *verId
- )
- {
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_FEATURES_REG );
- *noIRQs = ( val & 0x07FF0000 ) >> 16;
- *noCPUs = ( val & 0x00001F00 ) >> 8;
- *verId = ( val & 0x000000FF );
-}
-
-
-/*********************************************************
- * function: epciTmFrequncySet
- *
- * description: Set the timer frequency reporting register
- ********************************************************/
-void epicTmFrequencySet( unsigned int frq )
-{
- sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq);
-}
-
-/*******************************************************
- * function: epicTmFrequncyGet
- *
- * description: Get the current value of the Timer Frequency
- * Reporting register
- *
- ******************************************************/
-unsigned int epicTmFrequencyGet(void)
-{
- return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ;
-}
-
-
-/****************************************************
- * function: epicTmBaseSet
- *
- * description: Set the #n global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ****************************************************/
-unsigned int epicTmBaseSet
- (
- ULONG srcAddr, /* Address of the Timer Base register */
- unsigned int cnt, /* Base count */
- unsigned int inhibit /* 1 - count inhibit */
- )
-{
-
- unsigned int val = 0x80000000;
- /* First inhibit counting the timer */
- sysEUMBBARWrite(srcAddr, val) ;
-
- /* set the new value */
- val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31);
- sysEUMBBARWrite(srcAddr, val) ;
- return 0;
-}
-
-/***********************************************************************
- * function: epicTmBaseGet
- *
- * description: Get the current value of the global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ***********************************************************************/
-unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-/***********************************************************
- * function: epicTmCountGet
- *
- * description: Get the value of a given global timer
- * current count register
- * return 0 if no error, otherwise return 1
- * note:
- **********************************************************/
-unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-
-/***********************************************************
- * function: epicTmInhibit
- *
- * description: Stop counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- ***********************************************************/
-unsigned int epicTmInhibit( unsigned int srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val |= 0x80000000;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-/******************************************************************
- * function: epicTmEnable
- *
- * description: Enable counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- *****************************************************************/
-unsigned int epicTmEnable( ULONG srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val &= 0x7fffffff;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-void epicSourcePrint(int Vect)
- {
- ULONG srcVal;
-
- srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr);
- PRINT("%s\n", SrcVecTable[Vect].srcName);
- PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr);
- PRINT("Vector = %ld\n", (srcVal & 0x000000FF) );
- PRINT("Mask = %ld\n", srcVal >> 31);
- PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30);
- PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23);
- PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22);
- PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16);
- }
+++ /dev/null
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-
-/*********************************************
- * function: CoreExtIntEnable
- *
- * description: Enable 603e core external interrupt
- *
- * note: mtmsr is context-synchronization
- **********************************************/
- .text
- .align 2
- .global CoreExtIntEnable
-CoreExtIntEnable:
- mfmsr r3
-
- ori r3,r3,0x8000 /* enable external interrupt */
- mtmsr r3
-
- bclr 20, 0
-
-/*******************************************
- * function: CoreExtIntDisable
- *
- * description: Disable 603e core external interrupt
- *
- * note:
- *******************************************/
- .text
- .align 2
- .global CoreExtIntDisable
-CoreExtIntDisable:
- mfmsr r4
-
- xor r3,r3,r3
- or r3,r3,r4
-
- andis. r4,r4,0xffff
- andi. r3,r3,0x7fff /* disable external interrupt */
-
- or r3,r3,r4
- mtmsr r3
-
- bclr 20, 0
-
-/*********************************************************
- * function: epicEOI
- *
- * description: signal the EOI and restore machine status
- * Input: r3 - value of eumbbar
- * Output: r3 - value of eumbbar
- * r4 - ISR vector value
- * note:
- ********************************************************/
- .text
- .align 2
- .global epicEOI
-epicEOI:
- lis r5,0x0006 /* Build End Of Interrupt Register offset */
- ori r5,r5,0x00b0
- xor r7,r7,r7 /* Clear r7 */
- stwbrx r7,r5,r3 /* Save r7, writing to this register will
- * intidate the end of processing the
- * highest interrupt.
- */
- sync
-
- /* ---RESTORE MACHINE STATE */
- mfmsr r13 /* Clear Recoverable Interrupt bit in MSR */
- or r7,r7,r13
-
- andis. r7,r7,0xffff
- andi. r13,r13,0x7ffd /* (and disable interrupts) */
- or r13,r13,r7
- mtmsr r13
-
- lwz r13,0x1c(r1) /* pull ctr */
- mtctr r13
-
- lwz r13,0x18(r1) /* pull xer */
- mtctr r13
-
- lwz r13,0x14(r1) /* pull lr */
- mtctr r13
-
- lwz r13,0x10(r1) /* Pull SRR1 from stack */
- mtspr SRR1,r13 /* Restore SRR1 */
-
- lwz r13,0xc(r1) /* Pull SRR0 from stack */
- mtspr SRR0,r13 /* Restore SRR0 */
-
- lwz r13,0x8(r1) /* Pull User stack pointer from stack */
- mtspr SPRG1,r13 /* Restore SPRG1 */
-
- lwz r4,0x4(r1) /* vector value */
- lwz r3,0x0(r1) /* eumbbar */
- sync
-
- addi r1,r1,0x20 /* Deallocate stack */
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer */
- mfspr r1,SPRG1 /* Restore User stack pointer */
-
- bclr 20,0
-
-/***********************************************************
- * function: exception routine called by exception vector
- * at 0x500, external interrupt
- *
- * description: Kahlua EPIC controller
- *
- * input: r3 - content of eumbbar
- * output: r3 - ISR return value
- * r4 - Interrupt vector number
- * note:
- ***********************************************************/
-
- .text
- .align 2
- .global epic_exception
-
-epic_exception:
-
- /*---SAVE MACHINE STATE TO A STACK */
- mtspr SPRG1,r1 /* Save User stack pointer to SPRG1 */
- mfspr r1,SPRG0 /* Load Supervisor stack pointer into r1 */
-
- stwu r3,-0x20(r1) /* Push the value of eumbbar onto stack */
-
- mfspr r3,SPRG1 /* Push User stack pointer onto stack */
- stw r3,0x8(r1)
- mfspr r3,SRR0 /* Push SRR0 onto stack */
- stw r1,0xc(r1)
- mfspr r3,SRR1 /* Push SRR1 onto stack */
- stw r3,0x10(r1)
- mflr r3
- stw r3,0x14(r1) /* Push LR */
- mfxer r3
- stw r3,0x18(r1) /* Push Xer */
- mfctr r3
- stw r3,0x1c(r1) /* Push CTR */
-
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer
- * value to SPRG0
- */
- mfmsr r3
- ori r3,r3,0x0002 /* Set Recoverable Interrupt bit in MSR */
- mtmsr r3
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r6,0(r1) /* this is eumbbar */
- sync
-
- /* ---READ EPIC REGISTER: PROCESSOR INTERRUPT ACKNOWLEDGE REGISTER */
- lis r5,0x0006 /* Build Interrupt Acknowledge Register
- * offset
- */
- ori r5,r5,0x00a0
- lwbrx r7,r5,r6 /* Load interrupt vector into r7 */
- sync
-
- /* --MASK OFF ALL BITS EXCEPT THE VECTOR */
- xor r3,r3,r3
- xor r4,r4,r4
- or r3, r3, r6 /* eumbbar in r3 */
- andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
-
- stw r4,0x04(r1) /* save the vector value */
-
- lis r5,epicISR@ha
- ori r5,r5,epicISR@l
- mtlr r5
- blrl
-
- xor r30,r30,r30
- or r30,r30,r3 /* save the r3 which containts the return value from epicISR */
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r3,0(r1)
- sync
-
- lis r5,epicEOI@ha
- ori r5,r5,epicEOI@l
- mtlr r5
- blrl
-
- xor r3,r3,r3
- or r3,r3,r30 /* restore the ISR return value */
-
- bclr 20,0
+++ /dev/null
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- *
- * This file contains two commonly used
- * lower level utility routines.
- *
- * The utility routines are also in other
- * Kahlua device driver libraries. The
- * need to be linked in only once.
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- xor r5,r5,r5
- or r5,r5,r3 /* save eumbbar */
-
- lwbrx r3,r4,r5
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- xor r0,r0,r0
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
+++ /dev/null
-/* Copyright Motorola, Inc. 1993, 1994
- ALL RIGHTS RESERVED
-
- You are hereby granted a copyright license to use, modify, and
- distribute the SOFTWARE so long as this entire notice is retained
- without alteration in any modified and/or redistributed versions,
- and that such modified versions are clearly identified as such.
- No licenses are granted by implication, estoppel or otherwise under
- any patents or trademarks of Motorola, Inc.
-
- The SOFTWARE is provided on an "AS IS" basis and without warranty.
- To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
- ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
- PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
- REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
- THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-
- To the maximum extent permitted by applicable law, IN NO EVENT SHALL
- MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
- (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
- BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
- INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
- INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility
- for the maintenance and support of the SOFTWARE.
-
-*/
-
-
-#include "config.h"
-
-/*
- 1 2 3 4 5 6 7 8
-01234567890123456789012345678901234567890123456789012345678901234567890123456789
-*/
-/* List define statements here */
-
-/* These are for all the toolboxes and functions to use. These will help
-to standardize the error handling in the current project */
-
- /* this is the "data type" for the error
- messages in the system */
-#define STATUS unsigned int
-
- /* this is a success status code */
-#define SUCCESS 1
-
- /* likewise this is failure */
-#define FAILURE 0
-
-#define NUM_ERRORS 47
-
-/* This first section of "defines" are for error codes ONLY. The called
- routine will return one of these error codes to the caller. If the final
- returned code is "VALID", then everything is a-okay. However, if one
- of the functions returns a non-valid status, that error code should be
- propogated back to all the callers. At the end, the last caller will
- call an error_processing function, and send in the status which was
- returned. It's up to the error_processing function to determine which
- error occured (as indicated by the status), and print an appropriate
- message back to the user.
-*/
-/*----------------------------------------------------------------------*/
-/* these are specifically for the parser routines */
-
-#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
-#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
-#define ILLEGAL_RD_STAGE 0xfb02 /* cannot specify reg. family in range*/
-#define ILLEGAL_REG_FAMILY 0xfb03 /* "cannot specify a range of special
- or miscellaneous registers"*/
-#define RANGE_CROSS_FAMILY 0xfb04 /* "cannot specify a range across
- register families" */
-#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
-#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
-#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
-#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
-#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
-#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the error checking toolbox */
-
-#define INVALID 0xfd00 /* NOT valid */
-#define VALID 0xfd01 /* valid */
-
- /* This error is found in the fcn:
- is_right_size_input() to indicate
- that the input was not 8 characters
- long. */
-#define INVALID_SIZE 0xfd02
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the address given falls outside
- of valid memory defined by MEM_START
- to MEM_END.
- */
-#define OUT_OF_BOUNDS_ADDRESS 0xfd03
-
- /* This error is found in the fcn:
- is_valid_hex_input() to indicate that
- one of more of the characters entered
- are not valid hex characters. Valid
- hex characters are 0-9, A-F, a-f.
- */
-#define INVALID_HEX_INPUT 0xfd04
-
- /* This error is found in the fcn:
- is_valid_register_number() to indicate
- that a given register does not exist.
- */
-#define REG_NOT_READABLE 0xfd05
-
- /* This error is found in the fcn:
- is_word_aligned_address() to indicate
- that the given address is not word-
- aligned. A word-aligned address ends
- in 0x0,0x4,0x8,0xc.
- */
-#define NOT_WORD_ALIGNED 0xfd07
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the starting address is greater
- than the ending address.
- */
-#define REVERSED_ADDRESS 0xfd08
-
- /* this error tells us that the address
- specified as the destination is within
- the source addresses */
-#define RANGE_OVERLAP 0xfd09
-
-
-#define ERROR 0xfd0a /* An error occured */
-#define INVALID_PARAM 0xfd0b /* "invalid input parameter " */
-
-
-#define INVALID_FLAG 0xfd0c /* invalid flag */
-
-/*----------------------------------------------------------------------*/
-/* these are for the getarg toolbox */
-
-#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
-#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the tokenizer toolbox */
-
-#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
-#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
-#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
-#define INVALID_STRING 0xFF03 /* unable to extract string from input */
-#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
-#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
-#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
-#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
-#define NO_OPEN_IBS 0xFF08 /* "no open input buffers" */
-
-
-/* these are for the read from screen toolbox */
-
-#define RESERVED_WORD 0xFC00 /* used a reserved word as an arguement*/
-
-
-/* these are for the breakpoint routines */
-
-#define FULL_BPDS 0xFA00 /* breakpoint data structure is full */
-
-
-/* THESE are for the downloader */
-
-#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
-#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
-#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
-#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
-
-
-/* these are for the compression and decompression stuff */
-
-#define COMP_UNK_CHARACTER 0xf800 /* "unknown compressed character " */
-
-#define COMP_UNKNOWN_STATE 0xf801 /* "unknown binary state" */
-
-#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
-
-
-/* these are for the DUART handling things */
-
- /* "unrecognized serial port configuration" */
-#define UNKNOWN_PORT_STATE 0xf700
-
-
-/* these are for the register toolbox */
-
- /* "cannot find register in special
- purpose register file " */
-#define SPR_NOT_FOUND 0xf600
-
-
-/* these are for the duart specific stuff */
-
- /* "transparent mode needs access to
- two serial ports" */
-#define TM_NEEDS_BOTH_PORTS 0xf500
-
-
-/*----------------------------------------------------------------------*/
-/* these are specifically for the flash routines */
-#define FLASH_ERROR 0xf100 /* general flash error */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#undef I2CDBG
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CONFIG_SYS_HZ/4)
-
-#define I2C_Addr ((unsigned *)(CONFIG_SYS_EUMB_ADDR + 0x3000))
-
-#define I2CADR &I2C_Addr[0]
-#define I2CFDR &I2C_Addr[1]
-#define I2CCCR &I2C_Addr[2]
-#define I2CCSR &I2C_Addr[3]
-#define I2CCDR &I2C_Addr[4]
-
-#define MPC107_CCR_MEN 0x80
-#define MPC107_CCR_MIEN 0x40
-#define MPC107_CCR_MSTA 0x20
-#define MPC107_CCR_MTX 0x10
-#define MPC107_CCR_TXAK 0x08
-#define MPC107_CCR_RSTA 0x04
-
-#define MPC107_CSR_MCF 0x80
-#define MPC107_CSR_MAAS 0x40
-#define MPC107_CSR_MBB 0x20
-#define MPC107_CSR_MAL 0x10
-#define MPC107_CSR_SRW 0x04
-#define MPC107_CSR_MIF 0x02
-#define MPC107_CSR_RXAK 0x01
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-/* taken from linux include/asm-ppc/io.h */
-inline unsigned in_le32 (volatile unsigned *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__ ("lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync":"=r" (ret): "r" (addr), "m" (*addr));
- return ret;
-}
-
-inline void out_le32 (volatile unsigned *addr, int val)
-{
- __asm__ __volatile__ ("stwbrx %1,0,%2; eieio":"=m" (*addr):"r" (val),
- "r" (addr));
-}
-
-#define writel(val, addr) out_le32(addr, val)
-#define readl(addr) in_le32(addr)
-
-void i2c_init (int speed, int slaveadd)
-{
- /* stop I2C controller */
- writel (0x0, I2CCCR);
- /* set clock */
- writel (0x1020, I2CFDR);
- /* write slave address */
- writel (slaveadd, I2CADR);
- /* clear status register */
- writel (0x0, I2CCSR);
- /* start I2C controller */
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return;
-}
-
-static __inline__ int i2c_wait4bus (void)
-{
- ulong timeval = get_timer (0);
-
- while (readl (I2CCSR) & MPC107_CSR_MBB)
- if (get_timer (timeval) > TIMEOUT)
- return -1;
-
- return 0;
-}
-
-static __inline__ int i2c_wait (int write)
-{
- u32 csr;
- ulong timeval = get_timer (0);
-
- do {
- csr = readl (I2CCSR);
-
- if (!(csr & MPC107_CSR_MIF))
- continue;
-
- writel (0x0, I2CCSR);
-
- if (csr & MPC107_CSR_MAL) {
-#ifdef I2CDBG
- printf ("i2c_wait: MAL\n");
-#endif
- return -1;
- }
-
- if (!(csr & MPC107_CSR_MCF)) {
-#ifdef I2CDBG
- printf ("i2c_wait: unfinished\n");
-#endif
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & MPC107_CSR_RXAK)) {
-#ifdef I2CDBG
- printf ("i2c_wait: No RXACK\n");
-#endif
- return -1;
- }
-
- return 0;
- } while (get_timer (timeval) < TIMEOUT);
-
-#ifdef I2CDBG
- printf ("i2c_wait: timed out\n");
-#endif
- return -1;
-}
-
-static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX |
- (rsta ? MPC107_CCR_RSTA : 0), I2CCCR);
-
- writel ((dev << 1) | dir, I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- return 0;
-
- return 1;
-}
-
-static __inline__ int __i2c_write (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX, I2CCCR);
-
- for (i = 0; i < length; i++) {
- writel (data[i], I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- break;
- }
-
- return i;
-}
-
-static __inline__ int __i2c_read (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- ((length == 1) ? MPC107_CCR_TXAK : 0), I2CCCR);
-
- /* dummy read */
- readl (I2CCDR);
-
- for (i = 0; i < length; i++) {
- if (i2c_wait (I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- MPC107_CCR_TXAK, I2CCCR);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writel (MPC107_CCR_MEN | MPC107_CCR_TXAK, I2CCCR);
-
- data[i] = readl (I2CCDR);
- }
-
- return i;
-}
-
-int i2c_read (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_write (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay (10000);
- return i2c_read (chip, 0, 1, (uchar *) &tmp, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-#ifndef I2C_EXPORT_H
-#define I2C_EXPORT_H
-
-/****************************************************
- *
- * Copyright Motrola 1999
- *
- ****************************************************/
-
-/* These are the defined return values for the I2C_do_transaction function.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _i2c_status
-{
- I2C_SUCCESS = 0,
- I2C_ERROR,
-} I2C_Status;
-
-/* These are the defined tasks for I2C_do_transaction.
- * Modes for SLAVE_RCV and SLAVE_XMIT will be added.
- */
-typedef enum _i2c_transaction_mode
-{
- I2C_MASTER_RCV = 0,
- I2C_MASTER_XMIT = 1,
-} I2C_TRANSACTION_MODE;
-
-typedef enum _i2c_interrupt_mode
-{
- I2C_INT_DISABLE = 0,
- I2C_INT_ENABLE = 1,
-} I2C_INTERRUPT_MODE;
-
-typedef enum _i2c_stop
-{
- I2C_NO_STOP = 0,
- I2C_STOP = 1,
-} I2C_STOP_MODE;
-
-typedef enum _i2c_restart
-{
- I2C_NO_RESTART = 0,
- I2C_RESTART = 1,
-} I2C_RESTART_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by I2C driver.
- * This is a "generic" I2C interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we just transfer whatever
- * we are given
- **************************************************/
-
-
-/* Initialize I2C unit with the following:
- * driver's slave address
- * interrupt enabled
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * desired clock rate
- * digital filter frequency sampling rate
- *
- * This function must be called before I2C unit can be used.
- */
-extern I2C_Status I2C_Initialize(
- unsigned char addr, /* driver's I2C slave address */
- I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt
- * 0 - disable I2C interrupt
- */
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV
- * are implemented. Both are only in polling mode.
- *
- * en_int controls interrupt/polling mode
- * act is the type of transaction
- * addr is the I2C address of the slave device
- * len is the length of data to send or receive
- * buffer is the address of the data buffer
- * stop = I2C_NO_STOP, don't signal STOP at end of transaction
- * I2C_STOP, signal STOP at end of transaction
- * retry is the timeout retry value, currently ignored
- * rsta = I2C_NO_RESTART, this is not continuation of existing transaction
- * I2C_RESTART, this is a continuation of existing transaction
- */
-extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int,
- I2C_TRANSACTION_MODE act,
- unsigned char i2c_addr,
- unsigned char data_addr,
- int len,
- char *buffer,
- I2C_STOP_MODE stop,
- int retry,
- I2C_RESTART_MODE rsta);
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <commproc.h>
-#include "drivers/epic.h"
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- *decrementer_count = (get_bus_freq (0) / 4) / CONFIG_SYS_HZ;
-
- /*
- * It's all broken at the moment and I currently don't need
- * interrupts. If you want to fix it, have a look at the epic
- * drivers in dink32 v12. They do everthing and Motorola said
- * I could use the dink source in this project as long as
- * copyright notices remain intact.
- */
-
- epicInit (EPIC_DIRECT_IRQ, 0);
- /* EPIC won't generate INT unless Current Task Pri < 15 */
- epicCurTaskPrioSet(0);
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- register unsigned long temp;
-
- pci_readl (CONFIG_SYS_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
- sync (); /* i'm not convinced this is needed, but dink source has it */
- temp &= 0xff; /*get vector */
-
- /*TODO: handle them -... */
- epicEOI ();
-}
-
-/****************************************************************************/
-
-/*
- * blank int handlers.
- */
-
-void
-irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/*TODO: some handlers for winbond and 87308 interrupts
- and what about generic pci inteerupts?
- vga?
- */
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
+++ /dev/null
-/*
- * arch/ppc/kernel/mpc10x_common.c
- *
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <mpc824x.h>
-
-void pci_mpc824x_init (struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
- pci_set_region(hose->regions + 0,
- CHRP_PCI_MEMORY_BUS,
- CHRP_PCI_MEMORY_PHYS,
- CHRP_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CHRP_PCI_MEM_BUS,
- CHRP_PCI_MEM_PHYS,
- CHRP_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
- CHRP_ISA_MEM_BUS,
- CHRP_ISA_MEM_PHYS,
- CHRP_ISA_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + 3,
- CHRP_PCI_IO_BUS,
- CHRP_PCI_IO_PHYS,
- CHRP_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
- CHRP_ISA_IO_BUS,
- CHRP_ISA_IO_PHYS,
- CHRP_ISA_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 5;
-
- pci_setup_indirect(hose,
- CHRP_REG_ADDR,
- CHRP_REG_DATA);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency on
- * PCI_SYNC_IN .
- *
- * CONFIG_PLL_PCI_TO_MEM_MULTIPLIER is only required on MPC8240
- * boards. It should be defined as the PCI to Memory Multiplier as
- * documented in the MPC8240 Hardware Specs.
- *
- * Other mpc824x boards don't need CONFIG_PLL_PCI_TO_MEM_MULTIPLIER
- * because they can determine it from the PCR.
- *
- * Gary Milliorn <gary.milliorn@motorola.com> (who should know since
- * he designed the Sandpoint) told us that the PCR is not in all revs
- * of the MPC8240 CPU, so it's not guaranteeable and we cannot do
- * away with CONFIG_PLL_PCI_TO_MEM_MULTIPLIER altogether.
- */
-/* ------------------------------------------------------------------------- */
-
-/* This gives the PCI to Memory multiplier times 10 */
-/* The index is the value of PLL_CFG[0:4] */
-/* This is documented in the MPC8240/5 Hardware Specs */
-
-short pll_pci_to_mem_multiplier[] = {
-#if defined(CONFIG_MPC8240)
- 30, 30, 10, 10, 20, 10, 0, 10,
- 10, 0, 20, 0, 20, 0, 20, 0,
- 30, 0, 15, 0, 20, 0, 20, 0,
- 25, 0, 10, 0, 15, 15, 0, 0,
-#elif defined(CONFIG_MPC8245)
- 30, 30, 10, 10, 20, 10, 10, 10,
- 10, 20, 20, 15, 20, 15, 20, 30,
- 30, 40, 15, 40, 20, 25, 20, 40,
- 25, 20, 10, 20, 15, 15, 15, 0,
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-};
-
-#define CU824_PLL_STATE_REG 0xFE80002F
-#define PCR 0x800000E2
-
-/* ------------------------------------------------------------------------- */
-
-/* compute the memory bus clock frequency */
-ulong get_bus_freq (ulong dummy)
-{
- unsigned char pll_cfg;
-#if defined(CONFIG_MPC8240) && !defined(CONFIG_CU824)
- return (CONFIG_SYS_CLK_FREQ) * (CONFIG_PLL_PCI_TO_MEM_MULTIPLIER);
-#elif defined(CONFIG_CU824)
- pll_cfg = *(volatile unsigned char *) (CU824_PLL_STATE_REG);
- pll_cfg &= 0x1f;
-#else
- CONFIG_READ_BYTE(PCR, pll_cfg);
- pll_cfg = (pll_cfg >> 3) & 0x1f;
-#endif
- return ((CONFIG_SYS_CLK_FREQ) * pll_pci_to_mem_multiplier[pll_cfg] + 5) / 10;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/* This gives the Memory to CPU Core multiplier times 10 */
-/* The index is the value of PLLRATIO in HID1 */
-/* This is documented in the MPC8240 Hardware Specs */
-/* This is not documented for MPC8245 ? FIXME */
-short pllratio_to_factor[] = {
- 0, 0, 0, 10, 20, 20, 25, 45,
- 30, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 10, 0, 0, 0, 45,
- 30, 0, 40, 0, 0, 0, 35, 0,
-};
-
-/* compute the CPU and memory bus clock frequencies */
-int get_clocks (void)
-{
- uint hid1 = mfspr(HID1);
- hid1 = (hid1 >> (32-5)) & 0x1f;
- gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
- / 10;
- gd->bus_clk = get_bus_freq(0);
- return (0);
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <mpc824x.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* FP, Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
-#if defined(CONFIG_FADS)
- GOT_ENTRY(environment)
-#endif
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set FP, ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- addis r0,0,0x0000 /* lets make sure that r0 is really 0 */
- mtspr HID0, r0 /* disable I and D caches */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- mfmsr r3 /* turn off address translation */
- addis r4,0,0xffff
- ori r4,r4,0xffcf
- and r3,r3,r4
- mtmsr r3
- isync
- sync /* the MMU should be off... */
-
-
-in_flash:
-#if defined(CONFIG_BMW)
- bl early_init_f /* Must be ASM: no stack yet! */
-#endif
- /*
- * Setup BATs - cannot be done in C since we don't have a stack yet
- */
- bl setup_bats
-
- /* Enable MMU.
- */
- mfmsr r3
- ori r3, r3, (MSR_IR | MSR_DR)
- mtmsr r3
-#if !defined(CONFIG_BMW)
- /* Enable and invalidate data cache.
- */
- mfspr r3, HID0
- mr r2, r3
- ori r3, r3, HID0_DCE | HID0_DCI
- ori r2, r2, HID0_DCE
- sync
- mtspr HID0, r3
- mtspr HID0, r2
- sync
-
- /* Allocate Initial RAM in data cache.
- */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- li r2, 128
- mtctr r2
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock way0 in data cache.
- */
- mfspr r3, 1011
- lis r2, 0xffff
- ori r2, r2, 0xff1f
- and r3, r3, r2
- ori r3, r3, 0x0080
- sync
- mtspr 1011, r3
-#endif /* !CONFIG_BMW */
- /*
- * Thisk the stack pointer *somewhere* sensible. Doesnt
- * matter much where as we'll move it when we relocate
- */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = EXC_OFF_ALIGN
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = EXC_OFF_PROGRAM
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException)
- STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
- STD_EXCEPTION(0x1c00, ReservedC, UnknownException)
- STD_EXCEPTION(0x1d00, ReservedD, UnknownException)
- STD_EXCEPTION(0x1e00, ReservedE, UnknownException)
- STD_EXCEPTION(0x1f00, ReservedF, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
-#if 0
- andi. r23,r23,MSR_PR
- mfspr r23,SPRG3 /* if from user, fix up tss.regs */
- beq 2f
- addi r24,r1,STACK_FRAME_OVERHEAD
- stw r24,PT_REGS(r23)
-2: addi r2,r23,-TSS /* set r2 to current */
- tovirt(r2,r2,r23)
-#endif
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
-#if 0
- addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
- cmplw 0,r1,r2
- cmplw 1,r1,r24
- crand 1,1,4
- bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
-#endif
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- ori r20,r20,0x30 /* enable IR, DR */
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- mfspr r5,HID0 /* turn on the I cache. */
- ori r5,r5,0x8800 /* Instruction cache only! */
- addis r6,0,0xFFFF
- ori r6,r6,0xF7FF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0x7FFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- srwi r3, r3, 15 /* >>15 & 1=> select bit 16 */
- andi. r3, r3, 1
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r5,HID0 /* turn on the D cache. */
- ori r5,r5,0x4400 /* Data cache only! */
- mfspr r4, PVR /* read PVR */
- srawi r3, r4, 16 /* shift off the least 16 bits */
- cmpi 0, 0, r3, 0xC /* Check for Max pvr */
- bne NotMax
- ori r5,r5,0x0040 /* setting the DCFA bit, for Max rev 1 errata */
-NotMax:
- addis r6,0,0xFFFF
- ori r6,r6,0xFBFF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0xBFFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- srwi r3, r3, 14 /* >>14 & 1=> select bit 17 */
- andi. r3, r3, 1
- blr
-
- .globl dc_read
-dc_read:
-/*TODO : who uses this, what should it do?
-*/
- blr
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
-
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
-#ifdef CONFIG_SYS_RAMBOOT
- lis r4, CONFIG_SYS_SDRAM_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_SDRAM_BASE@l
-#else
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
-#endif
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-4:
-#if !defined(CONFIG_BMW)
-/* Unlock the data cache and invalidate locked area */
- xor r0, r0, r0
- mtspr 1011, r0
- lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
- li r0, 128
- mtctr r0
-41:
- dcbi r0, r4
- addi r4, r4, 32
- bdnz 41b
-#endif
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
- cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- blt 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
- /* Setup the BAT registers.
- */
-setup_bats:
- lis r4, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- lis r3, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- lis r3, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- lis r3, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- lis r3, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- lis r3, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- lis r3, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- lis r3, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
- /* Invalidate TLBs.
- * -> for (val = 0; val < 0x20000; val+=0x1000)
- * -> tlbie(val);
- */
- lis r3, 0
- lis r5, 2
-
-1:
- tlbie r3
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt 1b
-
- blr
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x00400000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc824x/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o kgdb.o
-COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
- interrupts.o ether_fcc.o i2c.o commproc.o \
- bedbug_603e.o pci.o spi.o
-
-COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
-
-COBJS += $(COBJS-y)
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * Bedbug Functions specific to the MPC603e core
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/type.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-
-#if defined(CONFIG_CMD_BEDBUG) \
- && (defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260))
-
-#define MAX_BREAK_POINTS 1
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug603e_init __P((void));
-void bedbug603e_do_break __P((cmd_tbl_t*,int,int,char*[]));
-void bedbug603e_break_isr __P((struct pt_regs*));
-int bedbug603e_find_empty __P((void));
-int bedbug603e_set __P((int,unsigned long));
-int bedbug603e_clear __P((int));
-
-\f
-/* ======================================================================
- * Initialize the global bug_ctx structure for the processor. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug603e_init( void )
-{
- int i;
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug603e_do_break;
- bug_ctx.break_isr = bedbug603e_break_isr;
- bug_ctx.find_empty = bedbug603e_find_empty;
- bug_ctx.set = bedbug603e_set;
- bug_ctx.clear = bedbug603e_clear;
-
- for( i = 1; i <= MAX_BREAK_POINTS; ++i )
- (*bug_ctx.clear)( i );
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-\f
-/* ======================================================================
- * Set/clear/show the hardware breakpoint for the 603e. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char *argv[])
-{
- long addr; /* Address to break at */
- int which_bp; /* Breakpoint number */
- /* -------------------------------------------------- */
-
- if (argc < 2)
- {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if( strcmp( argv[ 1 ], "off" ) == 0 )
- {
- if( bug_ctx.hw_debug_enabled == 0 )
- {
- puts ( "No breakpoints enabled\n" );
- return;
- }
-
- which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
- if( bug_ctx.clear )
- (*bug_ctx.clear)( which_bp );
-
- printf( "Breakpoint %d removed\n", which_bp );
- return;
- }
-
- /* Show a list of breakpoints */
-
- if( strcmp( argv[ 1 ], "show" ) == 0 )
- {
- for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
- {
-
- addr = GET_IABR();
-
- printf( "Breakpoint [%d]: ", which_bp );
- if( (addr & 0x00000002) == 0 )
- puts ( "NOT SET\n" );
- else
- disppc( (unsigned char *)(addr & 0xFFFFFFFC), 0, 1, bedbug_puts, F_RADHEX );
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if(!(( isdigit( argv[ 1 ][ 0 ] )) ||
- (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) ||
- (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' ))))
- {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul( argv[ 1 ], NULL, 16 );
-
- if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
- {
- printf( "Breakpoint [%d]: ", which_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
-
- return;
-} /* bedbug603e_do_break */
-
-
-\f
-/* ======================================================================
- * Handle a breakpoint. Enter a mini main loop. Stay in the loop until
- * the stopped flag in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug603e_break_isr( struct pt_regs *regs )
-{
- unsigned long addr; /* Address stopped at */
- /* -------------------------------------------------- */
-
- bug_ctx.current_bp = 1;
- addr = GET_IABR() & 0xFFFFFFFC;
-
- bedbug_main_loop( addr, regs );
- return;
-} /* bedbug603e_break_isr */
-
-
-\f
-/* ======================================================================
- * See if the hardware breakpoint is available.
- * ====================================================================== */
-
-int bedbug603e_find_empty( void )
-{
- /* -------------------------------------------------- */
-
- if( (GET_IABR() && 0x00000002) == 0 )
- return 1;
-
- return 0;
-} /* bedbug603e_find_empty */
-
-
-\f
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the IABR register.
- * ====================================================================== */
-
-int bedbug603e_set( int which_bp, unsigned long addr )
-{
- /* -------------------------------------------------- */
-
- if(( addr & 0x00000003 ) != 0 )
- {
- puts ( "Breakpoints must be on a 32 bit boundary\n" );
- return 0;
- }
-
- /* Only look if which_bp == 0, else use which_bp */
- if(( bug_ctx.find_empty ) && ( !which_bp ) &&
- ( which_bp = (*bug_ctx.find_empty)()) == 0 )
- {
- puts ( "All breakpoints in use\n" );
- return 0;
- }
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # %d\n", which_bp );
- return 0;
- }
-
- if( ! bug_ctx.hw_debug_enabled )
- {
- bug_ctx.hw_debug_enabled = 1;
- }
-
- SET_IABR( addr | 0x00000002 );
-
- return which_bp;
-} /* bedbug603e_set */
-
-
-\f
-/* ======================================================================
- * Disable a specific breakoint by setting the IABR register to zero.
- * ====================================================================== */
-
-int bedbug603e_clear( int which_bp )
-{
- /* -------------------------------------------------- */
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # (%d)\n", which_bp );
- return -1;
- }
-
- SET_IABR( 0 );
-
- return 0;
-} /* bedbug603e_clear */
-
-
-/* ====================================================================== */
-#endif
+++ /dev/null
-/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void
-m8260_cpm_reset(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile ulong count;
-
- /* Reclaim the DP memory for our use.
- */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
-
- /*
- * Reset CPM
- */
- immr->im_cpm.cp_cpcr = CPM_CR_RST;
- count = 0;
- do { /* Spin until command processed */
- __asm__ __volatile__ ("eieio");
- } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
-
-#ifdef CONFIG_HARD_I2C
- *((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
-#endif
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8260_cpm_dpalloc(uint size, uint align)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint retloc;
- uint align_mask, off;
- uint savebase;
-
- align_mask = align - 1;
- savebase = gd->dp_alloc_base;
-
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
-
- if ((off = size & align_mask) != 0)
- size += align - off;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
- panic("m8260_cpm_dpalloc: ran out of dual port ram!");
- }
-
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
-
- memset((void *)&immr->im_dprambase[retloc], 0, size);
-
- return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8260_cpm_hostalloc(uint size, uint align)
-{
- /* the host might not even have RAM yet - just use dual port RAM */
- return (m8260_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK (BRG_INT_CLK / 16)
-
-/* This function is used by UARTs, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8260_cpm_setbrg(uint brg, uint rate)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
- uint cd = BRG_UART_CLK / rate;
-
- if ((BRG_UART_CLK % rate) < (rate / 2))
- cd--;
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = (cd << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8260_cpm_fastbrg(uint brg, uint rate, int div16)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (pinsel == 0)
- *bp |= CPM_BRG_EXTC_CLK3_9;
- else
- *bp |= CPM_BRG_EXTC_CLK5_15;
-}
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc8260/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * modified by
- * Wolfgang Denk <wd@denx.de>
- *
- * modified for 8260 by
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * added 8260 masks by
- * Marius Groeger <mag@sysgo.de>
- *
- * added HiP7 (824x/827x/8280) processors support by
- * Yuli Barcohen <yuli@arabellasw.com>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/cpm_8260.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_GET_CPU_STR_F)
-extern int get_cpu_str_f (char *buf);
-#endif
-
-int checkcpu (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong clock = gd->cpu_clk;
- uint pvr = get_pvr ();
- uint immr, rev, m, k;
- char buf[32];
-
- puts ("CPU: ");
-
- switch (pvr) {
- case PVR_8260:
- case PVR_8260_HIP3:
- k = 3;
- break;
- case PVR_8260_HIP4:
- k = 4;
- break;
- case PVR_8260_HIP7R1:
- case PVR_8260_HIP7RA:
- case PVR_8260_HIP7:
- k = 7;
- break;
- default:
- return -1; /* whoops! not an MPC8260 */
- }
- rev = pvr & 0xff;
-
- immr = immap->im_memctl.memc_immr;
- if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR)
- return -1; /* whoops! someone moved the IMMR */
-
-#if defined(CONFIG_GET_CPU_STR_F)
- get_cpu_str_f (buf);
- printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev);
-#else
- printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
-#endif
-
- /*
- * the bottom 16 bits of the immr are the Part Number and Mask Number
- * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the
- * RISC Microcode Revision Number (13-10).
- * For the 8260, Motorola doesn't include the Microcode Revision
- * in the mask.
- */
- m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
- k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]);
-
- switch (m) {
- case 0x0000:
- puts ("0.2 2J24M");
- break;
- case 0x0010:
- puts ("A.0 K22A");
- break;
- case 0x0011:
- puts ("A.1 1K22A-XC");
- break;
- case 0x0001:
- puts ("B.1 1K23A");
- break;
- case 0x0021:
- puts ("B.2 2K23A-XC");
- break;
- case 0x0023:
- puts ("B.3 3K23A");
- break;
- case 0x0024:
- puts ("C.2 6K23A");
- break;
- case 0x0060:
- puts ("A.0(A) 2K25A");
- break;
- case 0x0062:
- puts ("B.1 4K25A");
- break;
- case 0x0064:
- puts ("C.0 5K25A");
- break;
- case 0x0A00:
- puts ("0.0 0K49M");
- break;
- case 0x0A01:
- puts ("0.1 1K49M");
- break;
- case 0x0A10:
- puts ("1.0 1K49M");
- break;
- case 0x0C00:
- puts ("0.0 0K50M");
- break;
- case 0x0C10:
- puts ("1.0 1K50M");
- break;
- case 0x0D00:
- puts ("0.0 0K50M");
- break;
- case 0x0D10:
- puts ("1.0 1K50M");
- break;
- default:
- printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
- break;
- }
-
- printf (") at %s MHz\n", strmhz (buf, clock));
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-/* configures a UPM by writing into the UPM RAM array */
-/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */
-/* NOTE: the physical address chosen must not overlap into any other area */
-/* mapped by the memory controller because bank 11 has the lowest priority */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */
- uint i;
-
- /* first set up bank 11 to reference the correct UPM at a dummy address */
-
- memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */
-
- switch (upm) {
-
- case UPMA:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA |
- BRx_V;
- memctl->memc_mamr = MxMR_OP_WARR;
- break;
-
- case UPMB:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB |
- BRx_V;
- memctl->memc_mbmr = MxMR_OP_WARR;
- break;
-
- case UPMC:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC |
- BRx_V;
- memctl->memc_mcmr = MxMR_OP_WARR;
- break;
-
- default:
- panic ("upmconfig passed invalid UPM number (%u)\n", upm);
- break;
-
- }
-
- /*
- * at this point, the dummy address is set up to access the selected UPM,
- * the MAD pointer is zero, and the MxMR OP is set for writing to RAM
- *
- * now we simply load the mdr with each word and poke the dummy address.
- * the MAD is incremented on each access.
- */
-
- for (i = 0; i < size; i++) {
- memctl->memc_mdr = table[i];
- *dummy = 0;
- }
-
- /* now kill bank 11 */
- memctl->memc_br11 = 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if !defined(CONFIG_HAVE_OWN_RESET)
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
- * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-
-}
-#endif /* CONFIG_HAVE_OWN_RESET */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
-void ft_cpu_setup (void *blob, bd_t *bd)
-{
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
- fdt_fixup_ethernet(blob);
-#endif
-
- do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
- "clock-frequency", bd->bi_brgfreq, 1);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif /* CONFIG_OF_LIBFDT */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_ETHER_ON_FCC)
- fec_initialize(bis);
-#endif
-#if defined(CONFIG_ETHER_ON_SCC)
- mpc82xx_scc_enet_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#include <ioports.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-extern unsigned long board_get_cpu_clk_f (void);
-#endif
-
-static void config_8260_ioports (volatile immap_t * immr)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (immr, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-
-#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask))
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
- uint sccr;
-#endif
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- unsigned long cpu_clk;
-#endif
- volatile memctl8260_t *memctl = &immr->im_memctl;
- extern void m8260_cpm_reset (void);
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* RSR - Reset Status Register - clear all status (5-4) */
- gd->reset_status = immr->im_clkrst.car_rsr;
- immr->im_clkrst.car_rsr = RSR_ALLBITS;
-
- /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
- immr->im_clkrst.car_rmr = CONFIG_SYS_RMR;
-
- /* BCR - Bus Configuration Register (4-25) */
-#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE)
- if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010);
- } else {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010);
- }
-#else
- immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR;
-#endif
-
- /* SIUMCR - contains debug pin configuration (4-31) */
-#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH)
- cpu_clk = board_get_cpu_clk_f ();
- if (cpu_clk >= 100000000) {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000);
- } else {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000);
- }
-#else
- immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
-
- config_8260_ioports (immr);
-
- /* initialize time counter status and control register (4-40) */
- immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC;
-
- /* initialize the PIT (4-42) */
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
- /* System clock control register (9-8) */
- sccr = immr->im_clkrst.car_sccr &
- (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
- immr->im_clkrst.car_sccr = sccr |
- (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
-#endif /* !CONFIG_COGENT */
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* the PS came from the HRCW, don´t change it */
- memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM)
- memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM;
- memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM)
- memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM;
- memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM)
- memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM;
- memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM)
- memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM;
- memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM;
-#endif
-
- m8260_cpm_reset ();
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
-
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-
- return (0);
-}
-
-/*
- * print out the reason for the reset
- */
-int prt_8260_rsr (void)
-{
- static struct {
- ulong mask;
- char *desc;
- } bits[] = {
- {
- RSR_JTRS, "JTAG"}, {
- RSR_CSRS, "Check Stop"}, {
- RSR_SWRS, "Software Watchdog"}, {
- RSR_BMRS, "Bus Monitor"}, {
- RSR_ESRS, "External Soft"}, {
- RSR_EHRS, "External Hard"}
- };
- static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
- int i;
- char *sep;
-
- puts (CPU_ID_STR " Reset Status:");
-
- sep = " ";
- for (i = 0; i < n; i++)
- if (rsr & bits[i].mask) {
- printf ("%s%s", sep, bits[i].desc);
- sep = ", ";
- }
-
- puts ("\n\n");
- return (0);
-}
+++ /dev/null
-/*
- * MPC8260 FCC Fast Ethernet
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8260 FCC Fast Ethernet
- * Basic ET HW initialization and packet RX/TX routines
- *
- * This code will not perform the IO port configuration. This should be
- * done in the iop_conf_t structure specific for the board.
- *
- * TODO:
- * add a PHY driver to do the negotiation
- * reflect negotiation results in FPSMR
- * look for ways to configure the board specific stuff elsewhere, eg.
- * config_xxx.h or the board directory
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/cpm_8260.h>
-#include <mpc8260.h>
-#include <command.h>
-#include <config.h>
-#include <net.h>
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
- defined(CONFIG_NET_MULTI)
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int proff_enet;
- ulong cpm_cr_enet_sblock;
- ulong cpm_cr_enet_page;
- ulong cmxfcr_mask;
- ulong cmxfcr_value;
-}
- ether_fcc_info[] =
-{
-#ifdef CONFIG_ETHER_ON_FCC1
-{
- 0,
- PROFF_FCC1,
- CPM_CR_FCC1_SBLOCK,
- CPM_CR_FCC1_PAGE,
- CONFIG_SYS_CMXFCR_MASK1,
- CONFIG_SYS_CMXFCR_VALUE1
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC2
-{
- 1,
- PROFF_FCC2,
- CPM_CR_FCC2_SBLOCK,
- CPM_CR_FCC2_PAGE,
- CONFIG_SYS_CMXFCR_MASK2,
- CONFIG_SYS_CMXFCR_VALUE2
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC3
-{
- 2,
- PROFF_FCC3,
- CPM_CR_FCC3_SBLOCK,
- CPM_CR_FCC3_PAGE,
- CONFIG_SYS_CMXFCR_MASK3,
- CONFIG_SYS_CMXFCR_VALUE3
-},
-#endif
-};
-
-/*---------------------------------------------------------------------*/
-
-/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
-#define PKT_MAXDMA_SIZE 1520
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets. */
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-
-/* Maximum input buffer size. Must be a multiple of 32. */
-#define PKT_MAXBLR_SIZE 1536
-
-#define TOUT_LOOP 1000000
-
-#define TX_BUF_CNT 2
-#ifdef __GNUC__
-static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8)));
-#else
-#error "txbuf must be 64-bit aligned"
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FCC Ethernet Tx and Rx buffer descriptors.
- * Provide for Double Buffering
- * Note: PKTBUFSRX is defined in net.h
- */
-
-typedef volatile struct rtxbd {
- cbd_t rxbd[PKTBUFSRX];
- cbd_t txbd[TX_BUF_CNT];
-} RTXBD;
-
-/* Good news: the FCC supports external BDs! */
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
-
- if (length <= 0) {
- printf("fec: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- puts ("fec: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx.txbd[txIdx].cbd_datlen = length;
- rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
- BD_ENET_TX_WRAP);
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- puts ("fec: tx error\n");
- goto out;
- }
- }
-
-#ifdef ET_DEBUG
- printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc);
-#endif
-
- /* return only status bits */
- result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
-
-out:
- return result;
-}
-
-static int fec_recv(struct eth_device* dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
- length = rtx.rxbd[rxIdx].cbd_datlen;
-
- if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
- printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
- }
- else {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the FCC. */
- rtx.rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-
-static int fec_init(struct eth_device* dev, bd_t *bis)
-{
- struct ether_fcc_info_s * info = dev->priv;
- int i;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8260_t *cp = &(immr->im_cpm);
- fcc_enet_t *pram_ptr;
- unsigned long mem_addr;
-
-#if 0
- mii_discover_phy();
-#endif
-
- /* 28.9 - (1-2): ioports have been set up already */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) |
- info->cmxfcr_value;
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
- immr->im_fcc[info->ether_index].fcc_gfmr =
- FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
-
- /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */
- immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555;
-
- /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
- rxIdx = 0;
- txIdx = 0;
-
- /* Setup Receiver Buffer Descriptors */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx.rxbd[i].cbd_datlen = 0;
- rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* Setup Ethernet Transmitter Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
- rtx.txbd[i].cbd_datlen = 0;
- rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
- }
- rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 28.9 - (7): initialise parameter ram */
- pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]);
-
- /* clear whole structure to make sure all reserved fields are zero */
- memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- */
- mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
- pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
- pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- */
- pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
- pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
- pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
-
- /* protocol-specific area */
- pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
- pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
- pram_ptr->fen_retlim = 15; /* Retry limit threshold */
- pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So, far we have only been given one Ethernet address. We make
- * it unique by setting a few bits in the upper byte of the
- * non-static part of the address.
- */
-#define ea eth_get_dev()->enetaddr
- pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
- pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
- /* pad pointer. use tiptr since we don't need a specific padding char */
- pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
- pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */
- pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */
- pram_ptr->fen_rfthr = 1;
- pram_ptr->fen_rfcnt = 1;
-#if 0
- printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n",
- pram_ptr->fen_genfcc.fcc_rbase);
- printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n",
- pram_ptr->fen_genfcc.fcc_tbase);
-#endif
-
- /* 28.9 - (8): clear out events in FCCE */
- immr->im_fcc[info->ether_index].fcc_fcce = ~0x0;
-
- /* 28.9 - (9): FCCM: mask all events */
- immr->im_fcc[info->ether_index].fcc_fccm = 0;
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
- info->cpm_cr_enet_sblock,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
-
- return 1;
-}
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s * info = dev->priv;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- /* write GFMR: disable tx/rx */
- immr->im_fcc[info->ether_index].fcc_gfmr &=
- ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
-}
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- {
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "FCC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- dev->priv = ðer_fcc_info[i];
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
- && defined(CONFIG_BITBANGMII)
- miiphy_register(dev->name,
- bb_miiphy_read, bb_miiphy_write);
-#endif
- }
-
- return 1;
-}
-
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
-
-#define ELBT_BUFSZ 1024 /* must be multiple of 32 */
-
-#define ELBT_CRCSZ 4
-
-#define ELBT_NRXBD 4 /* must be at least 2 */
-#define ELBT_NTXBD 4
-
-#define ELBT_MAXRXERR 32
-#define ELBT_MAXTXERR 32
-
-#define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */
-
-typedef
- struct {
- uint off;
- char *lab;
- }
-elbt_prdesc;
-
-typedef
- struct {
- uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl;
- uint badsrc, badtyp, badlen, badbit;
- }
-elbt_rxeacc;
-
-static elbt_prdesc rxeacc_descs[] = {
- { offsetof(elbt_rxeacc, _l), "Not Last in Frame" },
- { offsetof(elbt_rxeacc, _f), "Not First in Frame" },
- { offsetof(elbt_rxeacc, m), "Address Miss" },
- { offsetof(elbt_rxeacc, bc), "Broadcast Address" },
- { offsetof(elbt_rxeacc, mc), "Multicast Address" },
- { offsetof(elbt_rxeacc, lg), "Frame Length Violation"},
- { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" },
- { offsetof(elbt_rxeacc, sh), "Short Frame" },
- { offsetof(elbt_rxeacc, cr), "CRC Error" },
- { offsetof(elbt_rxeacc, ov), "Overrun" },
- { offsetof(elbt_rxeacc, cl), "Collision" },
- { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" },
- { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" },
- { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" },
- { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" },
-};
-static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]);
-
-typedef
- struct {
- uint def, hb, lc, rl, rc, un, csl;
- }
-elbt_txeacc;
-
-static elbt_prdesc txeacc_descs[] = {
- { offsetof(elbt_txeacc, def), "Defer Indication" },
- { offsetof(elbt_txeacc, hb), "Heartbeat" },
- { offsetof(elbt_txeacc, lc), "Late Collision" },
- { offsetof(elbt_txeacc, rl), "Retransmission Limit" },
- { offsetof(elbt_txeacc, rc), "Retry Count" },
- { offsetof(elbt_txeacc, un), "Underrun" },
- { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" },
-};
-static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]);
-
-typedef
- struct {
- uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ];
- uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ];
- cbd_t rxbd[ELBT_NRXBD];
- cbd_t txbd[ELBT_NTXBD];
- enum { Idle, Running, Closing, Closed } state;
- int proff, page, sblock;
- uint clstime, nsent, ntxerr, nrcvd, nrxerr;
- ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR];
- elbt_rxeacc rxeacc;
- elbt_txeacc txeacc;
- } __attribute__ ((aligned(8)))
-elbt_chan;
-
-static uchar patbytes[ELBT_NTXBD] = {
- 0xff, 0xaa, 0x55, 0x00
-};
-static uint patwords[ELBT_NTXBD] = {
- 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000
-};
-
-#ifdef __GNUC__
-static elbt_chan elbt_chans[3] __attribute__ ((aligned(8)));
-#else
-#error "elbt_chans must be 64-bit aligned"
-#endif
-
-#define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005)
-
-static elbt_prdesc epram_descs[] = {
- { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" },
- { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" },
- { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" },
- { offsetof(fcc_enet_t, fen_octc), "Octets" },
- { offsetof(fcc_enet_t, fen_colc), "Collisions" },
- { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" },
- { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" },
- { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" },
- { offsetof(fcc_enet_t, fen_frgc), "Fragments" },
- { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" },
- { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" },
- { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"},
-};
-static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]);
-
-/*
- * given an elbt_prdesc array and an array of base addresses, print
- * each prdesc down the screen with the values fetched from each
- * base address across the screen
- */
-static void
-print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase)
-{
- elbt_prdesc *dp = descs, *edp = dp + ndesc;
- int i;
-
- printf ("%32s", "");
-
- for (i = 0; i < nbase; i++)
- printf (" Channel %d", i);
-
- putc ('\n');
-
- while (dp < edp) {
-
- printf ("%-32s", dp->lab);
-
- for (i = 0; i < nbase; i++) {
- uint val = *(uint *)(bases[i] + dp->off);
-
- printf (" %10u", val);
- }
-
- putc ('\n');
-
- dp++;
- }
-}
-
-/*
- * return number of bits that are set in a value; value contains
- * nbits (right-justified) bits.
- */
-static uint __inline__
-nbs (uint value, uint nbits)
-{
- uint cnt = 0;
-#if 1
- uint pos = sizeof (uint) * 8;
-
- __asm__ __volatile__ ("\
- mtctr %2\n\
-1: rlwnm. %2,%1,%4,31,31\n\
- beq 2f\n\
- addi %0,%0,1\n\
-2: subi %4,%4,1\n\
- bdnz 1b"
- : "=r"(cnt)
- : "r"(value), "r"(nbits), "r"(cnt), "r"(pos)
- : "ctr", "cc" );
-#else
- uint mask = 1;
-
- do {
- if (value & mask)
- cnt++;
- mask <<= 1;
- } while (--nbits);
-#endif
-
- return (cnt);
-}
-
-static ulong
-badbits (uchar *bp, int n, ulong pat)
-{
- ulong *lp, cnt = 0;
- int nl;
-
- while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) {
- uchar diff;
-
- diff = *bp++ ^ (uchar)pat;
-
- if (diff)
- cnt += nbs ((ulong)diff, 8);
-
- n--;
- }
-
- lp = (ulong *)bp;
- nl = n / sizeof (ulong);
- n -= nl * sizeof (ulong);
-
- while (nl > 0) {
- ulong diff;
-
- diff = *lp++ ^ pat;
-
- if (diff)
- cnt += nbs (diff, 32);
-
- nl--;
- }
-
- bp = (uchar *)lp;
-
- while (n > 0) {
- uchar diff;
-
- diff = *bp++ ^ (uchar)pat;
-
- if (diff)
- cnt += nbs ((ulong)diff, 8);
-
- n--;
- }
-
- return (cnt);
-}
-
-static inline unsigned short
-swap16 (unsigned short x)
-{
- return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
-}
-
-/* broadcast is not an error - we send them like that */
-#define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC)
-
-void
-eth_loopback_test (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8260_t *cp = &(immr->im_cpm);
- int c, nclosed;
- ulong runtime, nmsec;
- uchar *bases[3];
-
- puts ("FCC Ethernet External loopback test\n");
-
- eth_getenv_enetaddr("ethaddr", NetOurEther);
-
- /*
- * global initialisations for all FCC channels
- */
-
- /* 28.9 - (1-2): ioports have been set up already */
-
-#if defined(CONFIG_HYMOD)
- /*
- * Attention: this is board-specific
- * 0, FCC1
- * 1, FCC2
- * 2, FCC3
- */
-# define FCC_START_LOOP 0
-# define FCC_END_LOOP 2
-
- /*
- * Attention: this is board-specific
- * - FCC1 Rx-CLK is CLK10
- * - FCC1 Tx-CLK is CLK11
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- * - FCC3 Rx-CLK is CLK15
- * - FCC3 Tx-CLK is CLK16
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
- CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
- CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
- /*
- * Attention: this is board-specific
- * 1, FCC2
- */
-# define FCC_START_LOOP 1
-# define FCC_END_LOOP 1
-
- /*
- * Attention: this is board-specific
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
-#else
-#error "eth_loopback_test not supported on your board"
-#endif
-
- puts ("Initialise FCC channels:");
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- elbt_chan *ecp = &elbt_chans[c];
- volatile fcc_t *fcp = &immr->im_fcc[c];
- volatile fcc_enet_t *fpp;
- int i;
- ulong addr;
-
- /*
- * initialise channel data
- */
-
- printf (" %d", c);
-
- memset ((void *)ecp, 0, sizeof (*ecp));
-
- ecp->state = Idle;
-
- switch (c) {
-
- case 0: /* FCC1 */
- ecp->proff = PROFF_FCC1;
- ecp->page = CPM_CR_FCC1_PAGE;
- ecp->sblock = CPM_CR_FCC1_SBLOCK;
- break;
-
- case 1: /* FCC2 */
- ecp->proff = PROFF_FCC2;
- ecp->page = CPM_CR_FCC2_PAGE;
- ecp->sblock = CPM_CR_FCC2_SBLOCK;
- break;
-
- case 2: /* FCC3 */
- ecp->proff = PROFF_FCC3;
- ecp->page = CPM_CR_FCC3_PAGE;
- ecp->sblock = CPM_CR_FCC3_SBLOCK;
- break;
- }
-
- /*
- * set up tx buffers and bds
- */
-
- for (i = 0; i < ELBT_NTXBD; i++) {
- cbd_t *bdp = &ecp->txbd[i];
- uchar *bp = &ecp->txbufs[i][0];
-
- bdp->cbd_bufaddr = (uint)bp;
- /* room for crc */
- bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ;
- bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
- BD_ENET_TX_LAST | BD_ENET_TX_TC;
-
- memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
- NetSetEther (bp, NetBcastAddr, 0x8000);
- }
- ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /*
- * set up rx buffers and bds
- */
-
- for (i = 0; i < ELBT_NRXBD; i++) {
- cbd_t *bdp = &ecp->rxbd[i];
- uchar *bp = &ecp->rxbufs[i][0];
-
- bdp->cbd_bufaddr = (uint)bp;
- bdp->cbd_datlen = 0;
- bdp->cbd_sc = BD_ENET_RX_EMPTY;
-
- memset ((void *)bp, 0, ELBT_BUFSZ);
- }
- ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * set up the FCC channel hardware
- */
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
- fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
-
- /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */
- fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \
- FCC_PSMR_ENCRC | FCC_PSMR_PRO | \
- FCC_PSMR_MON | FCC_PSMR_RSH;
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- fcp->fcc_fdsr = 0xD555;
-
- /* 29.9 - (7): initialise parameter ram */
- fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]);
-
- /* clear whole struct to make sure all resv fields are zero */
- memset ((void *)fpp, 0, sizeof (fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- */
- addr = CPM_FCC_SPECIAL_BASE + (c * 64);
- fpp->fen_genfcc.fcc_riptr = addr;
- fpp->fen_genfcc.fcc_tiptr = addr + 32;
-
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- * buffers are in 60x bus memory.
- */
- fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
- fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
- fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]);
- fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
- fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]);
-
- /* protocol-specific area */
- fpp->fen_cmask = 0xdebb20e3; /* CRC mask */
- fpp->fen_cpres = 0xffffffff; /* CRC preset */
- fpp->fen_retlim = 15; /* Retry limit threshold */
- fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */
-
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So, far we have only been given one Ethernet address. We use
- * the same address for all channels
- */
-#define ea NetOurEther
- fpp->fen_paddrh = (ea[5] << 8) + ea[4];
- fpp->fen_paddrm = (ea[3] << 8) + ea[2];
- fpp->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
- fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
- /*
- * pad pointer. use tiptr since we don't need
- * a specific padding char
- */
- fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr;
- fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */
- fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */
- fpp->fen_rfthr = 1;
- fpp->fen_rfcnt = 1;
-
- /* 28.9 - (8): clear out events in FCCE */
- fcp->fcc_fcce = ~0x0;
-
- /* 28.9 - (9): FCCM: mask all events */
- fcp->fcc_fccm = 0;
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \
- 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
- }
-
- puts (" done\nStarting test... (Ctrl-C to Finish)\n");
-
- /*
- * Note: don't want serial output from here until the end of the
- * test - the delays would probably stuff things up.
- */
-
- clear_ctrlc ();
- runtime = get_timer (0);
-
- do {
- nclosed = 0;
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- volatile fcc_t *fcp = &immr->im_fcc[c];
- elbt_chan *ecp = &elbt_chans[c];
- int i;
-
- switch (ecp->state) {
-
- case Idle:
- /*
- * set the channel Running ...
- */
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
-
- ecp->state = Running;
- break;
-
- case Running:
- /*
- * (while Running only) check for
- * termination of the test
- */
-
- (void)ctrlc ();
-
- if (had_ctrlc ()) {
- /*
- * initiate a "graceful stop transmit"
- * on the channel
- */
- cp->cp_cpcr = mk_cr_cmd (ecp->page, \
- ecp->sblock, 0x0c, \
- CPM_CR_GRACEFUL_STOP_TX) | \
- CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- ecp->clstime = get_timer (0);
- ecp->state = Closing;
- }
- /* fall through ... */
-
- case Closing:
- /*
- * (while Running or Closing) poll the channel:
- * - check for any non-READY tx buffers and
- * make them ready
- * - check for any non-EMPTY rx buffers and
- * check that they were received correctly,
- * adjust counters etc, then make empty
- */
-
- for (i = 0; i < ELBT_NTXBD; i++) {
- cbd_t *bdp = &ecp->txbd[i];
- ushort sc = bdp->cbd_sc;
-
- if ((sc & BD_ENET_TX_READY) != 0)
- continue;
-
- /*
- * this frame has finished
- * transmitting
- */
- ecp->nsent++;
-
- if (sc & BD_ENET_TX_STATS) {
- ulong n;
-
- /*
- * we had an error on
- * the transmission
- */
- n = ecp->ntxerr++;
- if (n < ELBT_MAXTXERR)
- ecp->txerrs[n] = sc;
-
- if (sc & BD_ENET_TX_DEF)
- ecp->txeacc.def++;
- if (sc & BD_ENET_TX_HB)
- ecp->txeacc.hb++;
- if (sc & BD_ENET_TX_LC)
- ecp->txeacc.lc++;
- if (sc & BD_ENET_TX_RL)
- ecp->txeacc.rl++;
- if (sc & BD_ENET_TX_RCMASK)
- ecp->txeacc.rc++;
- if (sc & BD_ENET_TX_UN)
- ecp->txeacc.un++;
- if (sc & BD_ENET_TX_CSL)
- ecp->txeacc.csl++;
-
- bdp->cbd_sc &= \
- ~BD_ENET_TX_STATS;
- }
-
- if (ecp->state == Closing)
- ecp->clstime = get_timer (0);
-
- /* make it ready again */
- bdp->cbd_sc |= BD_ENET_TX_READY;
- }
-
- for (i = 0; i < ELBT_NRXBD; i++) {
- cbd_t *bdp = &ecp->rxbd[i];
- ushort sc = bdp->cbd_sc, mask;
-
- if ((sc & BD_ENET_RX_EMPTY) != 0)
- continue;
-
- /* we have a new frame in this buffer */
- ecp->nrcvd++;
-
- mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST;
- if ((sc & mask) != mask) {
- /* somethings wrong here ... */
- if (!(sc & BD_ENET_RX_LAST))
- ecp->rxeacc._l++;
- if (!(sc & BD_ENET_RX_FIRST))
- ecp->rxeacc._f++;
- }
-
- if (sc & BD_ENET_RX_ERRS) {
- ulong n;
-
- /*
- * we had some sort of error
- * on the frame
- */
- n = ecp->nrxerr++;
- if (n < ELBT_MAXRXERR)
- ecp->rxerrs[n] = sc;
-
- if (sc & BD_ENET_RX_MISS)
- ecp->rxeacc.m++;
- if (sc & BD_ENET_RX_BC)
- ecp->rxeacc.bc++;
- if (sc & BD_ENET_RX_MC)
- ecp->rxeacc.mc++;
- if (sc & BD_ENET_RX_LG)
- ecp->rxeacc.lg++;
- if (sc & BD_ENET_RX_NO)
- ecp->rxeacc.no++;
- if (sc & BD_ENET_RX_SH)
- ecp->rxeacc.sh++;
- if (sc & BD_ENET_RX_CR)
- ecp->rxeacc.cr++;
- if (sc & BD_ENET_RX_OV)
- ecp->rxeacc.ov++;
- if (sc & BD_ENET_RX_CL)
- ecp->rxeacc.cl++;
-
- bdp->cbd_sc &= \
- ~BD_ENET_RX_ERRS;
- }
- else {
- ushort datlen = bdp->cbd_datlen;
- Ethernet_t *ehp;
- ushort prot;
- int ours, tb, n, nbytes;
-
- ehp = (Ethernet_t *) \
- &ecp->rxbufs[i][0];
-
- ours = memcmp (ehp->et_src, \
- NetOurEther, 6);
-
- prot = swap16 (ehp->et_protlen);
- tb = prot & 0x8000;
- n = prot & 0x7fff;
-
- nbytes = ELBT_BUFSZ - \
- offsetof (Ethernet_t, \
- et_dsap) - \
- ELBT_CRCSZ;
-
- /* check the frame is correct */
- if (datlen != ELBT_BUFSZ)
- ecp->rxeacc.badlen++;
- else if (!ours)
- ecp->rxeacc.badsrc++;
- else if (!tb || n >= ELBT_NTXBD)
- ecp->rxeacc.badtyp++;
- else {
- ulong patword = \
- patwords[n];
- uint nbb;
-
- nbb = badbits ( \
- &ehp->et_dsap, \
- nbytes, \
- patword);
-
- ecp->rxeacc.badbit += \
- nbb;
- }
- }
-
- if (ecp->state == Closing)
- ecp->clstime = get_timer (0);
-
- /* make it empty again */
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
- }
-
- if (ecp->state != Closing)
- break;
-
- /*
- * (while Closing) check to see if
- * waited long enough
- */
-
- if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) {
- /* write GFMR: disable tx/rx */
- fcp->fcc_gfmr &= \
- ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- ecp->state = Closed;
- }
-
- break;
-
- case Closed:
- nclosed++;
- break;
- }
- }
-
- } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
-
- runtime = get_timer (runtime);
- if (runtime <= ELBT_CLSWAIT) {
- printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n",
- runtime, ELBT_CLSWAIT);
- return;
- }
- nmsec = runtime - ELBT_CLSWAIT;
-
- printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n",
- nmsec, ELBT_CLSWAIT);
-
- /*
- * now print stats
- */
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- elbt_chan *ecp = &elbt_chans[c];
- uint rxpps, txpps, nerr;
-
- rxpps = (ecp->nrcvd * 1000) / nmsec;
- txpps = (ecp->nsent * 1000) / nmsec;
-
- printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), "
- "%d sent (%d pps, %d txerrs)\n\n", c,
- ecp->nrcvd, rxpps, ecp->nrxerr,
- ecp->nsent, txpps, ecp->ntxerr);
-
- if ((nerr = ecp->nrxerr) > 0) {
- ulong i;
-
- printf ("\tFirst %d rx errs:", nerr);
- for (i = 0; i < nerr; i++)
- printf (" %04x", ecp->rxerrs[i]);
- putc ('\n');
- }
-
- if ((nerr = ecp->ntxerr) > 0) {
- ulong i;
-
- printf ("\tFirst %d tx errs:", nerr);
- for (i = 0; i < nerr; i++)
- printf (" %04x", ecp->txerrs[i]);
- putc ('\n');
- }
- }
-
- puts ("Receive Error Counts:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&elbt_chans[c].rxeacc;
- print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
-
- puts ("\nTransmit Error Counts:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&elbt_chans[c].txeacc;
- print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
-
- puts ("\nRMON(-like) Counters:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
- print_desc (epram_descs, epram_ndesc, bases, 3);
-}
-
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
-#endif
+++ /dev/null
-/*
- * MPC8260 SCC Ethernet
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright (c) 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jtm@smoothsmoothie.com>
- *
- * Modified so that it plays nicely when more than one ETHERNET interface
- * is in use a la ether_fcc.c.
- * (C) Copyright 2008
- * DENX Software Engineerin GmbH
- * Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/cpm_8260.h>
-#include <mpc8260.h>
-#include <malloc.h>
-#include <net.h>
-#include <command.h>
-#include <config.h>
-
-#ifndef CONFIG_NET_MULTI
-#error "CONFIG_NET_MULTI must be defined."
-#endif
-
-#if (CONFIG_ETHER_INDEX == 1)
-# define PROFF_ENET PROFF_SCC1
-# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC1 |\
- CMXSCR_RS1CS_MSK |\
- CMXSCR_TS1CS_MSK)
-
-#elif (CONFIG_ETHER_INDEX == 2)
-# define PROFF_ENET PROFF_SCC2
-# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC2 |\
- CMXSCR_RS2CS_MSK |\
- CMXSCR_TS2CS_MSK)
-
-#elif (CONFIG_ETHER_INDEX == 3)
-# define PROFF_ENET PROFF_SCC3
-# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC3 |\
- CMXSCR_RS3CS_MSK |\
- CMXSCR_TS3CS_MSK)
-#elif (CONFIG_ETHER_INDEX == 4)
-# define PROFF_ENET PROFF_SCC4
-# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC4 |\
- CMXSCR_RS4CS_MSK |\
- CMXSCR_TS4CS_MSK)
-
-#endif
-
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#if !defined(CONFIG_SYS_SCC_TOUT_LOOP)
- #define CONFIG_SYS_SCC_TOUT_LOOP 1000000
-#endif
-
-static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * SCC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-
-static int sec_send(struct eth_device *dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
-
- if (length <= 0) {
- printf("scc: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
- puts ("scc: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
- BD_ENET_TX_WRAP);
-
- for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
- puts ("scc: tx error\n");
- goto out;
- }
- }
-
- /* return only status bits */
- result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
-
- out:
- return result;
-}
-
-
-static int sec_rx(struct eth_device *dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
- {
- printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
- }
- else
- {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
- BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-/**************************************************************
- *
- * SCC Ethernet Initialization Routine
- *
- *************************************************************/
-
-static int sec_init(struct eth_device *dev, bd_t *bis)
-{
- int i;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- scc_enet_t *pram_ptr;
- uint dpaddr;
- uchar ea[6];
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Assign static pointer to BD area.
- * Avoid exhausting DPRAM, which would cause a panic.
- */
- if (rtx == NULL) {
- dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
- rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
- }
-
- /* 24.21 - (1-3): ioports have been set up already */
-
- /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
- CONFIG_SYS_CMXSCR_VALUE);
-
-
- /* 24.21 (6) write RBASE and TBASE to parameter RAM */
- pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]);
- pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]);
- pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]);
-
- pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */
- pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */
-
- pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */
-
- pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
- pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
-
-
- /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
- while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
- CPM_CR_ENET_SBLOCK,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- /* 24.21 - (8-18): Set up parameter RAM */
- pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
- pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */
- pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
-
- pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
-
- pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
-
- pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
- pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
-
- pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
- pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
-
- pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
- pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
- pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
- pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
-
- eth_getenv_enetaddr("ethaddr", ea);
- pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-
- pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
-
- pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
- pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
- pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
- pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
-
- pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
- pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
- pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
-
- /* 24.21 - (19): Initialize RxBD */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
-
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* 24.21 - (20): Initialize TxBD */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
- BD_ENET_TX_LAST |
- BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
- }
-
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 24.21 - (21): Write 0xffff to SCCE */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0);
-
- /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
- SCCE_ENET_RXF |
- SCCE_ENET_TXB);
-
- /* 24.21 - (23): we don't use ethernet interrupts */
-
- /* 24.21 - (24): Clear GSMR_H to enable normal operations */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0;
-
- /* 24.21 - (25): Clear GSMR_L to enable normal operations */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
-
- /* 24.21 - (26): Initialize DSR */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
-
- /* 24.21 - (27): Initialize PSMR2
- *
- * Settings:
- * CRC = 32-Bit CCITT
- * NIB = Begin searching for SFD 22 bits after RENA
- * FDE = Full Duplex Enable
- * BRO = Reject broadcast packets
- * PROMISCOUS = Catch all packets regardless of dest. MAC adress
- */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC |
- SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
- SCC_PSMR_FDE |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
- SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
- SCC_PSMR_PRO |
-#endif
- 0;
-
- /* 24.21 - (28): Write to GSMR_L to enable SCC */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-
- return 0;
-}
-
-
-static void sec_halt(struct eth_device *dev)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-}
-
-#if 0
-static void sec_restart(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-}
-#endif
-
-int mpc82xx_scc_enet_initialize(bd_t *bis)
-{
- struct eth_device *dev;
-
- dev = (struct eth_device *) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "SCC ETHERNET");
- dev->init = sec_init;
- dev->halt = sec_halt;
- dev->send = sec_send;
- dev->recv = sec_rx;
-
- eth_register(dev);
-
- return 1;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_HARD_I2C)
-
-#include <asm/cpm_8260.h>
-#include <i2c.h>
-
-/* define to enable debug messages */
-#undef DEBUG_I2C
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
-#endif /* CONFIG_I2C_MULTI_BUS */
-
-/* uSec to wait between polls of the i2c */
-#define DELAY_US 100
-/* uSec to wait for the CPM to start processing the buffer */
-#define START_DELAY_US 1000
-
-/*
- * tx/rx per-byte timeout: we delay DELAY_US uSec between polls so the
- * timeout will be (tx_length + rx_length) * DELAY_US * TOUT_LOOP
- */
-#define TOUT_LOOP 5
-
-/*-----------------------------------------------------------------------
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-typedef void (*i2c_ecb_t)(int, int, void *); /* error callback function */
-
-/* This structure keeps track of the bd and buffer space usage. */
-typedef struct i2c_state {
- int rx_idx; /* index to next free Rx BD */
- int tx_idx; /* index to next free Tx BD */
- void *rxbd; /* pointer to next free Rx BD */
- void *txbd; /* pointer to next free Tx BD */
- int tx_space; /* number of Tx bytes left */
- unsigned char *tx_buf; /* pointer to free Tx area */
- i2c_ecb_t err_cb; /* error callback function */
- void *cb_data; /* private data to be passed */
-} i2c_state_t;
-
-/* flags for i2c_send() and i2c_receive() */
-#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
-#define I2CF_START_COND 0x02 /* tx: generate start condition */
-#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
-
-/* return codes */
-#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */
-#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */
-#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */
-#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/receive */
-#define I2CERR_IO_ERROR 5 /* had an error during comms */
-
-/* error callback flags */
-#define I2CECB_RX_ERR 0x10 /* this is a receive error */
-#define I2CECB_RX_OV 0x02 /* receive overrun error */
-#define I2CECB_RX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
-#define I2CECB_TX_CL 0x01 /* transmit collision error */
-#define I2CECB_TX_UN 0x02 /* transmit underflow error */
-#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
-#define I2CECB_TX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
-
-#define ERROR_I2C_NONE 0
-#define ERROR_I2C_LENGTH 1
-
-#define I2C_WRITE_BIT 0x00
-#define I2C_READ_BIT 0x01
-
-#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-
-
-#define NUM_RX_BDS 4
-#define NUM_TX_BDS 4
-#define MAX_TX_SPACE 256
-
-typedef struct I2C_BD
-{
- unsigned short status;
- unsigned short length;
- unsigned char *addr;
-} I2C_BD;
-#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
-
-#define BD_I2C_TX_CL 0x0001 /* collision error */
-#define BD_I2C_TX_UN 0x0002 /* underflow error */
-#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
-#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
-
-#define BD_I2C_RX_ERR BD_SC_OV
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-/*
- * Returns the best value of I2BRG to meet desired clock speed of I2C with
- * input parameters (clock speed, filter, and predivider value).
- * It returns computer speed value and the difference between it and desired
- * speed.
- */
-static inline int
-i2c_roundrate(int hz, int speed, int filter, int modval,
- int *brgval, int *totspeed)
-{
- int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
-
- PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
- hz, speed, filter, modval));
-
- div = moddiv * speed;
- brgdiv = (hz + div - 1) / div;
-
- PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
-
- *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
-
- if ((*brgval < 0) || (*brgval > 255)) {
- PRINTD(("\t\trejected brgval=%d\n", *brgval));
- return -1;
- }
-
- brgdiv = 2 * (*brgval + 3 + (2 * filter));
- div = moddiv * brgdiv ;
- *totspeed = hz / div;
-
- PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
-
- return 0;
-}
-
-/*
- * Sets the I2C clock predivider and divider to meet required clock speed.
- */
-static int i2c_setrate(int hz, int speed)
-{
- immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- int brgval,
- modval, /* 0-3 */
- bestspeed_diff = speed,
- bestspeed_brgval=0,
- bestspeed_modval=0,
- bestspeed_filter=0,
- totspeed,
- filter = 0; /* Use this fixed value */
-
- for (modval = 0; modval < 4; modval++)
- {
- if (i2c_roundrate (hz, speed, filter, modval, &brgval, &totspeed) == 0)
- {
- int diff = speed - totspeed ;
-
- if ((diff >= 0) && (diff < bestspeed_diff))
- {
- bestspeed_diff = diff ;
- bestspeed_modval = modval;
- bestspeed_brgval = brgval;
- bestspeed_filter = filter;
- }
- }
- }
-
- PRINTD(("[I2C] Best is:\n"));
- PRINTD(("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
- hz, speed,
- bestspeed_filter, bestspeed_modval, bestspeed_brgval,
- bestspeed_diff));
-
- i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
- i2c->i2c_i2brg = bestspeed_brgval & 0xff;
-
- PRINTD(("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, i2c->i2c_i2brg));
-
- return 1 ;
-}
-
-void i2c_init(int speed, int slaveadd)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- volatile iic_t *iip;
- ulong rbase, tbase;
- volatile I2C_BD *rxbd, *txbd;
- uint dpaddr;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#endif
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- if (dpaddr == 0) {
- /* need to allocate dual port ram */
- dpaddr = m8260_cpm_dpalloc(64 +
- (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
- MAX_TX_SPACE, 64);
- *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])) = dpaddr;
- }
-
- /*
- * initialise data in dual port ram:
- *
- * dpaddr -> parameter ram (64 bytes)
- * rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
- * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
- * tx buffer (MAX_TX_SPACE bytes)
- */
-
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- memset((void*)iip, 0, sizeof(iic_t));
-
- rbase = dpaddr + 64;
- tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
-
- /* Disable interrupts */
- i2c->i2c_i2mod = 0x00;
- i2c->i2c_i2cmr = 0x00;
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2add = slaveadd;
-
- /*
- * Set the I2C BRG Clock division factor from desired i2c rate
- * and current CPU rate (we assume sccr dfbgr field is 0;
- * divide BRGCLK by 1)
- */
- PRINTD(("[I2C] Setting rate...\n"));
- i2c_setrate (gd->brg_clk, CONFIG_SYS_I2C_SPEED) ;
-
- /* Set I2C controller in master mode */
- i2c->i2c_i2com = 0x01;
-
- /* Initialize Tx/Rx parameters */
- iip->iic_rbase = rbase;
- iip->iic_tbase = tbase;
- rxbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_rbase]);
- txbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_tbase]);
-
- PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
- PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- /* Set big endian byte order */
- iip->iic_tfcr = 0x10;
- iip->iic_rfcr = 0x10;
-
- /* Set maximum receive size. */
- iip->iic_mrblr = I2C_RXTX_LEN;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE,
- CPM_CR_I2C_SBLOCK,
- 0x00,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* Clear events and interrupts */
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2cmr = 0x00;
-}
-
-static
-void i2c_newio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile iic_t *iip;
- uint dpaddr;
-
- PRINTD(("[I2C] i2c_newio\n"));
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- state->rx_idx = 0;
- state->tx_idx = 0;
- state->rxbd = (void*)&immap->im_dprambase[iip->iic_rbase];
- state->txbd = (void*)&immap->im_dprambase[iip->iic_tbase];
- state->tx_space = MAX_TX_SPACE;
- state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
- state->err_cb = NULL;
- state->cb_data = NULL;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
- PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
-
- /* clear the buffer memory */
- memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
-}
-
-static
-int i2c_send(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size,
- unsigned char *dataout)
-{
- volatile I2C_BD *txbd;
- int i,j;
-
- PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
- address, secondary_address, flags, size));
-
- /* trying to send message larger than BD */
- if (size > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
- return I2CERR_NO_BUFFERS;
-
- txbd = (I2C_BD *)state->txbd;
- txbd->addr = state->tx_buf;
-
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- if (flags & I2CF_START_COND)
- {
- PRINTD(("[I2C] Formatting addresses...\n"));
- if (flags & I2CF_ENABLE_SECONDARY)
- {
- txbd->length = size + 2; /* Length of message plus dest addresses */
- txbd->addr[0] = address << 1;
- txbd->addr[1] = secondary_address;
- i = 2;
- }
- else
- {
- txbd->length = size + 1; /* Length of message plus dest address */
- txbd->addr[0] = address << 1; /* Write destination address to BD */
- i = 1;
- }
- }
- else
- {
- txbd->length = size; /* Length of message */
- i = 0;
- }
-
- /* set up txbd */
- txbd->status = BD_SC_READY;
- if (flags & I2CF_START_COND)
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-
- /* Copy data to send into buffer */
- PRINTD(("[I2C] copy data...\n"));
- for(j = 0; j < size; i++, j++)
- txbd->addr[i] = dataout[j];
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
-
- return 0;
-}
-
-static
-int i2c_receive(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size_to_expect,
- unsigned char *datain)
-{
- volatile I2C_BD *rxbd, *txbd;
-
- PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
-
- /* Expected to receive too much */
- if (size_to_expect > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
- || state->tx_space < 2)
- return I2CERR_NO_BUFFERS;
-
- rxbd = (I2C_BD *)state->rxbd;
- txbd = (I2C_BD *)state->txbd;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- txbd->addr = state->tx_buf;
-
- /* set up TXBD for destination address */
- if (flags & I2CF_ENABLE_SECONDARY)
- {
- txbd->length = 2;
- txbd->addr[0] = address << 1; /* Write data */
- txbd->addr[1] = secondary_address; /* Internal address */
- txbd->status = BD_SC_READY;
- }
- else
- {
- txbd->length = 1 + size_to_expect;
- txbd->addr[0] = (address << 1) | 0x01;
- txbd->status = BD_SC_READY;
- memset(&txbd->addr[1], 0, txbd->length);
- }
-
- /* set up rxbd for reception */
- rxbd->status = BD_SC_EMPTY;
- rxbd->length = size_to_expect;
- rxbd->addr = datain;
-
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- {
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
- rxbd->status |= BD_SC_WRAP;
- }
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
- PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- rxbd->length,
- rxbd->status,
- rxbd->addr[0],
- rxbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
- state->rx_idx++;
- state->rxbd = (void*)(rxbd + 1);
-
- return 0;
-}
-
-
-static
-int i2c_doio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile iic_t *iip;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- volatile I2C_BD *txbd, *rxbd;
- int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
- uint dpaddr;
-
- PRINTD(("[I2C] i2c_doio\n"));
-
- if (state->tx_idx <= 0 && state->rx_idx <= 0) {
- PRINTD(("[I2C] No I/O is queued\n"));
- return I2CERR_QUEUE_EMPTY;
- }
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
-
- /* Enable I2C */
- PRINTD(("[I2C] Enabling I2C...\n"));
- i2c->i2c_i2mod |= 0x01;
-
- /* Begin transmission */
- i2c->i2c_i2com |= 0x80;
-
- /* Loop until transmit & receive completed */
-
- if ((n = state->tx_idx) > 0) {
-
- txbd = ((I2C_BD*)state->txbd) - n;
- for (i = 0; i < n; i++) {
- txtimeo += TOUT_LOOP * txbd->length;
- txbd++;
- }
-
- txbd--; /* wait until last in list is done */
-
- PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
-
- udelay(START_DELAY_US); /* give it time to start */
- while((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) {
- udelay(DELAY_US);
- if (ctrlc())
- return (-1);
- __asm__ __volatile__ ("eieio");
- }
- }
-
- if (txcnt < txtimeo && (n = state->rx_idx) > 0) {
-
- rxbd = ((I2C_BD*)state->rxbd) - n;
- for (i = 0; i < n; i++) {
- rxtimeo += TOUT_LOOP * rxbd->length;
- rxbd++;
- }
-
- rxbd--; /* wait until last in list is done */
-
- PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
-
- udelay(START_DELAY_US); /* give it time to start */
- while((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) {
- udelay(DELAY_US);
- if (ctrlc())
- return (-1);
- __asm__ __volatile__ ("eieio");
- }
- }
-
- /* Turn off I2C */
- i2c->i2c_i2mod &= ~0x01;
-
- if ((n = state->tx_idx) > 0) {
- for (i = 0; i < n; i++) {
- txbd = ((I2C_BD*)state->txbd) - (n - i);
- if ((b = txbd->status & BD_I2C_TX_ERR) != 0) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_TX_ERR|b, i,
- state->cb_data);
- if (rc == 0)
- rc = I2CERR_IO_ERROR;
- }
- }
- }
-
- if ((n = state->rx_idx) > 0) {
- for (i = 0; i < n; i++) {
- rxbd = ((I2C_BD*)state->rxbd) - (n - i);
- if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_RX_ERR|b, i,
- state->cb_data);
- if (rc == 0)
- rc = I2CERR_IO_ERROR;
- }
- }
- }
-
- if ((txtimeo > 0 && txcnt >= txtimeo) || \
- (rxtimeo > 0 && rxcnt >= rxtimeo)) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_TIMEOUT, -1, state->cb_data);
- if (rc == 0)
- rc = I2CERR_TIMEOUT;
- }
-
- return (rc);
-}
-
-static void
-i2c_probe_callback(int flags, int xnum, void *data)
-{
- /*
- * the only acceptable errors are a transmit NAK or a receive
- * overrun - tx NAK means the device does not exist, rx OV
- * means the device must have responded to the slave address
- * even though the transfer failed
- */
- if (flags == (I2CECB_TX_ERR|I2CECB_TX_NAK))
- *(int *)data |= 1;
- if (flags == (I2CECB_RX_ERR|I2CECB_RX_OV))
- *(int *)data |= 2;
-}
-
-int
-i2c_probe(uchar chip)
-{
- i2c_state_t state;
- int rc, err_flag;
- uchar buf[1];
-
- i2c_newio(&state);
-
- state.err_cb = i2c_probe_callback;
- state.cb_data = (void *) &err_flag;
- err_flag = 0;
-
- rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
-
- if (rc != 0)
- return (rc); /* probe failed */
-
- rc = i2c_doio(&state);
-
- if (rc == 0)
- return (0); /* device exists - read succeeded */
-
- if (rc == I2CERR_TIMEOUT)
- return (-1); /* device does not exist - timeout */
-
- if (rc != I2CERR_IO_ERROR || err_flag == 0)
- return (rc); /* probe failed */
-
- if (err_flag & 1)
- return (-1); /* device does not exist - had transmit NAK */
-
- return (0); /* device exists - had receive overrun */
-}
-
-
-int
-i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
- * and the extra bits end up in the "chip address" bit slots.
- * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
- * chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- printf("i2c_read: i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- printf("i2c_read: i2c_receive failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- printf("i2c_read: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-int
-i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
- * and the extra bits end up in the "chip address" bit slots.
- * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
- * chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- printf("i2c_write: first i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- printf("i2c_write: second i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- printf("i2c_write: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
- return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
- if (bus < CONFIG_SYS_MAX_I2C_BUS) {
- i2c_bus_num = bus;
- } else {
- int ret;
-
- ret = i2x_mux_select_mux(bus);
- if (ret == 0)
- i2c_bus_num = bus;
- else
- return ret;
- }
-#else
- if (bus >= CONFIG_SYS_MAX_I2C_BUS)
- return -1;
- i2c_bus_num = bus;
-#endif
- return 0;
-}
-
-#endif /* CONFIG_I2C_MULTI_BUS */
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <mpc8260_irq.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/****************************************************************************/
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS];
-
-static ulong ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/****************************************************************************/
-/* this section was ripped out of arch/ppc/kernel/ppc8260_pic.c in the */
-/* Linux/PPC 2.4.x source. There was no copyright notice in that file. */
-
-/* The 8260 internal interrupt controller. It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-static u_char irq_to_siureg[] = {
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-static u_char irq_to_siubit[] = {
- 31, 16, 17, 18, 19, 20, 21, 22,
- 23, 24, 25, 26, 27, 28, 29, 30,
- 29, 30, 16, 17, 18, 19, 20, 21,
- 22, 23, 24, 25, 26, 27, 28, 31,
- 0, 1, 2, 3, 4, 5, 6, 7,
- 8, 9, 10, 11, 12, 13, 14, 15,
- 15, 14, 13, 12, 11, 10, 9, 8,
- 7, 6, 5, 4, 3, 2, 1, 0
-};
-
-static void m8260_mask_irq (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void m8260_unmask_irq (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- ppc_cached_irq_mask[word] |= (1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void m8260_mask_and_ack (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr, *sipnr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- sipnr = &(immr->im_intctl.ic_sipnrh);
- ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
- sipnr[word] = 1 << (31 - bit);
-}
-
-static int m8260_get_irq (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- unsigned long bits;
-
- /* For MPC8260, read the SIVEC register and shift the bits down
- * to get the irq number. */
- bits = immr->im_intctl.ic_sivec;
- irq = bits >> 26;
- return irq;
-}
-
-/* end of code ripped out of arch/ppc/kernel/ppc8260_pic.c */
-/****************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
-
- /* Initialize the default interrupt mapping priorities */
- immr->im_intctl.ic_sicr = 0;
- immr->im_intctl.ic_siprr = 0x05309770;
- immr->im_intctl.ic_scprrh = 0x05309770;
- immr->im_intctl.ic_scprrl = 0x05309770;
-
- /* disable all interrupts and clear all pending bits */
- immr->im_intctl.ic_simrh = ppc_cached_irq_mask[0] = 0;
- immr->im_intctl.ic_simrl = ppc_cached_irq_mask[1] = 0;
- immr->im_intctl.ic_sipnrh = 0xffffffff;
- immr->im_intctl.ic_sipnrl = 0xffffffff;
-
-#ifdef CONFIG_HYMOD
- /*
- * ensure all external interrupt sources default to trigger on
- * high-to-low transition (i.e. edge triggered active low)
- */
- immr->im_intctl.ic_siexr = -1;
-#endif
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- int irq, unmask = 1;
-
- irq = m8260_get_irq (regs);
-
- m8260_mask_and_ack (irq);
-
- enable_interrupts ();
-
- if (irq_handlers[irq].handler != NULL)
- (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
- else {
- printf ("\nBogus External Interrupt IRQ %d\n", irq);
- /*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
- unmask = 0;
- }
-
- if (unmask)
- m8260_unmask_irq (irq);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free an interrupt handler.
- */
-
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf ("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf ("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- m8260_unmask_irq (irq);
-}
-
-void irq_free_handler (int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf ("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- m8260_mask_irq (irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-
-/* ripped this out of ppc4xx/interrupts.c */
-
-/*******************************************************************************
-*
-* irqinfo - print information about PCI devices
-*
-*/
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- int irq, re_enable;
-
- re_enable = disable_interrupts ();
-
- puts ("\nInterrupt-Information:\n"
- "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < 32; irq++)
- if (irq_handlers[irq].handler != NULL)
- printf ("%02d %08lx %08lx %ld\n", irq,
- (ulong) irq_handlers[irq].handler,
- (ulong) irq_handlers[irq].arg,
- irq_handlers[irq].count);
-
- if (re_enable)
- enable_interrupts ();
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <version.h>
-
-#define CONFIG_8260 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- mfspr r3, HID0
- ori r3, r3, HID0_ICFI|HID0_DCI /* Invalidate All */
- SYNC
- mtspr HID0, r3
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI bridge on MPC8272ADS
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <pci.h>
-#include <mpc8260.h>
-#include <asm/m8260_pci.h>
-#include <asm/io.h>
-#ifdef CONFIG_OF_LIBFDT
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-/*
- * Local->PCI map (from CPU) controlled by
- * MPC826x master window
- *
- * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
- * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
- *
- * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
- * PCI Mem with prefetch
- *
- * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
- * PCI Mem w/o prefetch
- *
- * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
- * 32-bit PCI IO
- *
- * PCI->Local map (from PCI)
- * MPC826x slave window controlled by
- *
- * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
- * MPC826x local memory
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
-#else
-#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
-#else
-#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
-#endif
-
-#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
-#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
- PICMR_PREFETCH_EN)
-#else
-#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
-#endif
-
-/*
- * These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
- * these windows.
- */
-
-/* PCIBR0 */
-#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
-#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
-#else
-#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCIMSK0_MASK
-#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
-#else
-#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK
-#endif
-
-/* PCIBR1 */
-#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
-#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
-#else
-#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCIMSK1_MASK
-#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
-#else
-#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK
-#endif
-
-/*
- * Master window that allows the CPU to access PCI Memory (prefetch).
- * This window will be setup with the first set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#else
-#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#else
-#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_MEM_START
-#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
-#else
-#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
-#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
-#else
-#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
-#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
-#else
-#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
-#endif
-
-/*
- * Master window that allows the CPU to access PCI Memory (non-prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
-#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
-#else
-#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
-#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
-#else
-#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
-#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
-#else
-#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
-#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
-#else
-#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
-#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
-#else
-#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
-#endif
-
-/*
- * Master window that allows the CPU to access PCI IO space.
- * This window will be setup with the third set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
-#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
-#else
-#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
-#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
-#else
-#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_IO_START
-#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
-#else
-#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
-#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
-#else
-#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
-#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
-#else
-#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
-#endif
-
-/* PCI bus configuration registers.
- */
-
-#define PCI_CLASS_BRIDGE_CTLR 0x06
-
-
-static inline void pci_outl (u32 addr, u32 data)
-{
- *(volatile u32 *) addr = cpu_to_le32 (data);
-}
-
-void pci_mpc8250_init (struct pci_controller *hose)
-{
- u16 tempShort;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- pci_dev_t host_devno = PCI_BDF (0, 0, 0);
-
- pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
- CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);
-
- /*
- * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
- */
-#ifdef CONFIG_MPC8266ADS
- immap->im_siu_conf.sc_siumcr =
- (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
- | SIUMCR_LBPC01;
-#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-/* nothing to do for this board here */
-#elif defined CONFIG_MPC8272
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_BBD &
- ~SIUMCR_ESE &
- ~SIUMCR_PBSE &
- ~SIUMCR_CDIS &
- ~SIUMCR_DPPC11 &
- ~SIUMCR_L2CPC11 &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_APPC11 &
- ~SIUMCR_CS10PC11 &
- ~SIUMCR_BCTLC11 &
- ~SIUMCR_MMR11)
- | SIUMCR_DPPC11
- | SIUMCR_L2CPC01
- | SIUMCR_LBPC00
- | SIUMCR_APPC10
- | SIUMCR_CS10PC00
- | SIUMCR_BCTLC00
- | SIUMCR_MMR11;
-#elif defined(CONFIG_TQM8272)
-/* nothing to do for this Board here */
-#else
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_CS10PC11 &
- ~SIUMCR_LBPC11) |
- SIUMCR_LBPC01 |
- SIUMCR_CS10PC01 |
- SIUMCR_APPC10;
-#endif
-
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
-
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.sc_ppc_acr = 0x6;
-
- /*
- * Set up master windows that allow the CPU to access PCI space. These
- * windows are set up using the two SIU PCIBR registers.
- */
- immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
- immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
-
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
- immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
-#endif
-
- /* Release PCI RST (by default the PCI RST signal is held low) */
- immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
-
- /* give it some time */
- {
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- /* Give the PCI cards more time to initialize before query
- This might be good for other boards also
- */
- int i;
-
- for (i = 0; i < 1000; ++i)
-#endif
- udelay (1000);
- }
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
- immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
- immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
- immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */
-
- /* See above for description - puts PCI request as highest priority */
-#ifdef CONFIG_MPC8272
- immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
-#else
- immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
-#endif
-
- /* Park the bus on the PCI */
- immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
- /* Host mode - specify the bridge as a host-PCI bridge */
-
- pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
- PCI_CLASS_BRIDGE_CTLR);
-
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
- pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY);
-
- /* do some bridge init, should be done on all 8260 based bridges */
- pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
- 0x08);
- pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
- 0xF8);
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
- pci_set_region (hose->regions + 0,
- PCI_SLV_MEM_BUS,
- PCI_SLV_MEM_LOCAL,
- gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-#else
- pci_set_region (hose->regions + 0,
- CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_BASE,
- 0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-#endif
-
- /* PCI memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- pci_set_region (hose->regions + 1,
- PCI_MSTR_MEMIO_BUS,
- PCI_MSTR_MEMIO_LOCAL,
- PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
-#else
- pci_set_region (hose->regions + 1,
- PCI_MSTR_MEM_BUS,
- PCI_MSTR_MEM_LOCAL,
- PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
-#endif
-
- /* PCI I/O space */
- pci_set_region (hose->regions + 2,
- PCI_MSTR_IO_BUS,
- PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose (hose);
- /* Mask off master abort machine checks */
- immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
- eieio ();
-
- hose->last_busno = pci_hose_scan (hose);
-
-
- /* clear the error in the error status register */
- immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
-
- /* unmask master abort machine checks */
- immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
-}
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
- "clock-frequency", gd->pci_clk, 1);
-}
-#endif
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
- */
-
-/*
- * Minimal serial functions needed to use one of the SCC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SCC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
-
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
-
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
-
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
-
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-int serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr;
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(im->im_scc[SCC_INDEX]);
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
-
- /* Disable transmitter/receiver.
- */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr&~CMXSCR_MASK)|CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
- serial_setbrg ();
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->scc_gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(SCC_INDEX, gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile immap_t *im;
-
- if (c == '\n')
- serial_putc ('\r');
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
- unsigned char c;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-int
-serial_tstc()
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
-}
-
-#endif /* CONFIG_CONS_ON_SCC */
-
-#if defined(CONFIG_KGDB_ON_SCC)
-
-#if defined(CONFIG_CONS_ON_SCC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Whoops! serial console and kgdb are on the same scc serial port
-#endif
-
-#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SCC1 */
-
-#define KGDB_SCC_INDEX 0
-#define KGDB_PROFF_SCC PROFF_SCC1
-#define KGDB_CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SCC2 */
-
-#define KGDB_SCC_INDEX 1
-#define KGDB_PROFF_SCC PROFF_SCC2
-#define KGDB_CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 3 /* KGDB Port on SCC3 */
-
-#define KGDB_SCC_INDEX 2
-#define KGDB_PROFF_SCC PROFF_SCC3
-#define KGDB_CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 4 /* KGDB Port on SCC4 */
-
-#define KGDB_SCC_INDEX 3
-#define KGDB_PROFF_SCC PROFF_SCC4
-#define KGDB_CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "kgdb serial port not correctly defined"
-
-#endif
-
-void
-kgdb_serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
- char *s, *e;
-
- if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
- ulong rate = simple_strtoul(s, &e, 10);
- if (e > s && *e == '\0')
- speed = rate;
- }
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(im->im_scc[KGDB_SCC_INDEX]);
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
-
- /* Disable transmitter/receiver.
- */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- im->im_cpmux.cmx_scr = \
- (im->im_cpmux.cmx_scr & ~KGDB_CMXSCR_MASK) | KGDB_CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
-#if defined(CONFIG_KGDB_USE_EXTC)
- m8260_cpm_extcbrg(KGDB_SCC_INDEX, speed,
- CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(KGDB_SCC_INDEX, speed);
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->scc_gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SCC_PAGE, KGDB_CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- printf("SCC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
-}
-
-void
-putDebugChar(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile immap_t *im;
-
- if (c == '\n')
- putDebugChar ('\r');
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
- tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-putDebugStr (const char *s)
-{
- while (*s) {
- putDebugChar (*s++);
- }
-}
-
-int
-getDebugChar(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
- unsigned char c;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-
-#endif /* CONFIG_KGDB_ON_SCC */
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
- * Linux/PPC sources (m8260_tty.c had no copyright info in it).
- */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SMC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */
-
-#define SMC_INDEX 0
-#define PROFF_SMC_BASE PROFF_SMC1_BASE
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */
-
-#define SMC_INDEX 1
-#define PROFF_SMC_BASE PROFF_SMC2_BASE
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-/* map rs_table index to baud rate generator index */
-static unsigned char brg_map[] = {
- 6, /* BRG7 for SMC1 */
- 7, /* BRG8 for SMC2 */
- 0, /* BRG1 for SCC1 */
- 1, /* BRG1 for SCC2 */
- 2, /* BRG1 for SCC3 */
- 3, /* BRG1 for SCC4 */
-};
-
-int serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- /* allocate size of struct serialbuffer with bd rx/tx,
- * buffer rx/tx and rx index
- */
- dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr];
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
- serial_setbrg ();
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for last character to go. */
- while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY)
- ;
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- ;
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-int
-serial_tstc()
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-#endif /* CONFIG_CONS_ON_SMC */
-
-#if defined(CONFIG_KGDB_ON_SMC)
-
-#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Whoops! serial console and kgdb are on the same smc serial port
-#endif
-
-#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */
-
-#define KGDB_SMC_INDEX 0
-#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE
-#define KGDB_PROFF_SMC PROFF_SMC1
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */
-
-#define KGDB_SMC_INDEX 1
-#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE
-#define KGDB_PROFF_SMC PROFF_SMC2
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-void
-kgdb_serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
- char *s, *e;
-
- if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
- ulong rate = simple_strtoul(s, &e, 10);
- if (e > s && *e == '\0')
- speed = rate;
- }
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr =
- (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
-#if defined(CONFIG_KGDB_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed,
- CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed);
-#endif
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Single character receive. */
- up->smc_mrblr = 1;
- up->smc_maxidl = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
-}
-
-void
-putDebugChar(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- if (c == '\n')
- putDebugChar ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
-
- /* Wait for last character to go. */
- buf = (char *)tbdf->cbd_bufaddr;
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-putDebugStr (const char *s)
-{
- while (*s) {
- putDebugChar (*s++);
- }
-}
-
-int
-getDebugChar(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-
-#endif /* CONFIG_KGDB_ON_SMC */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-extern unsigned long board_get_cpu_clk_f (void);
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* Bus-to-Core Multiplier */
-#define _1x 2
-#define _1_5x 3
-#define _2x 4
-#define _2_5x 5
-#define _3x 6
-#define _3_5x 7
-#define _4x 8
-#define _4_5x 9
-#define _5x 10
-#define _5_5x 11
-#define _6x 12
-#define _6_5x 13
-#define _7x 14
-#define _7_5x 15
-#define _8x 16
-#define _byp -1
-#define _off -2
-#define _unk -3
-
-typedef struct {
- int b2c_mult;
- int vco_div;
- char *freq_60x;
- char *freq_core;
-} corecnf_t;
-
-/*
- * this table based on "Errata to MPC8260 PowerQUICC II User's Manual",
- * Rev. 1, 8/2000, page 10.
- */
-corecnf_t corecnf_tab[] = {
- { _1_5x, 4, " 33-100", " 33-100" }, /* 0x00 */
- { _1x, 4, " 50-150", " 50-150" }, /* 0x01 */
- { _1x, 8, " 25-75 ", " 25-75 " }, /* 0x02 */
- { _byp, -1, " ?-? ", " ?-? " }, /* 0x03 */
- { _2x, 2, " 50-150", "100-300" }, /* 0x04 */
- { _2x, 4, " 25-75 ", " 50-150" }, /* 0x05 */
- { _2_5x, 2, " 40-120", "100-240" }, /* 0x06 */
- { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x07 */
- { _3x, 2, " 33-100", "100-300" }, /* 0x08 */
- { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x09 */
- { _4x, 2, " 25-75 ", "100-300" }, /* 0x0A */
- { _5x, 2, " 20-60 ", "100-300" }, /* 0x0B */
- { _1_5x, 8, " 16-50 ", " 16-50 " }, /* 0x0C */
- { _6x, 2, " 16-50 ", "100-300" }, /* 0x0D */
- { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x0E */
- { _off, -1, " ?-? ", " ?-? " }, /* 0x0F */
- { _3x, 4, " 16-50 ", " 50-150" }, /* 0x10 */
- { _2_5x, 4, " 20-60 ", " 50-120" }, /* 0x11 */
- { _6_5x, 2, " 15-46 ", "100-300" }, /* 0x12 */
- { _byp, -1, " ?-? ", " ?-? " }, /* 0x13 */
- { _7x, 2, " 14-43 ", "100-300" }, /* 0x14 */
- { _2x, 4, " 25-75 ", " 50-150" }, /* 0x15 */
- { _7_5x, 2, " 13-40 ", "100-300" }, /* 0x16 */
- { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x17 */
- { _unk, -1, " ?-? ", " ?-? " }, /* 0x18 */
- { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x19 */
- { _4x, 2, " 25-75 ", "100-300" }, /* 0x1A */
- { _5x, 2, " 20-60 ", "100-300" }, /* 0x1B */
- { _8x, 2, " 12-38 ", "100-300" }, /* 0x1C */
- { _6x, 2, " 16-50 ", "100-300" }, /* 0x1D */
- { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x1E */
- { _off, -1, " ?-? ", " ?-? " }, /* 0x1F */
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong clkin;
- ulong sccr, dfbrg;
- ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
- corecnf_t *cp;
-
-#if !defined(CONFIG_8260_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_8260_CLKIN
-#else
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- clkin = board_get_cpu_clk_f ();
-#else
- clkin = CONFIG_8260_CLKIN;
-#endif
-#endif
-
- sccr = immap->im_clkrst.car_sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-
- scmr = immap->im_clkrst.car_scmr;
- corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- cp = &corecnf_tab[corecnf];
-
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
-
- /* HiP7, HiP7 Rev01, HiP7 RevA */
- if ((get_pvr () == PVR_8260_HIP7) ||
- (get_pvr () == PVR_8260_HIP7R1) ||
- (get_pvr () == PVR_8260_HIP7RA)) {
- pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
- gd->vco_out = clkin * (pllmf + 1);
- } else { /* HiP3, HiP4 */
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
- }
-#if 0
- if (gd->vco_out / (busdf + 1) != clkin) {
- /* aaarrrggghhh!!! */
- return (1);
- }
-#endif
-
- gd->cpm_clk = gd->vco_out / 2;
- gd->bus_clk = clkin;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
-
- if (cp->b2c_mult > 0) {
- gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
- } else {
- gd->cpu_clk = clkin;
- }
-
-#ifdef CONFIG_PCI
- gd->pci_clk = clkin;
-
- if (sccr & SCCR_PCI_MODE) {
- uint pci_div;
- uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
- if (sccr & SCCR_PCI_MODCK) {
- pci_div = 2;
- if (pcidf == 9) {
- pci_div *= 5;
- } else if (pcidf == 0xB) {
- pci_div *= 6;
- } else {
- pci_div *= (pcidf + 1);
- }
- } else {
- pci_div = pcidf + 1;
- }
-
- gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
- }
-#endif
-
- return (0);
-}
-
-int prt_8260_clks (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong sccr, dfbrg;
- ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
- corecnf_t *cp;
-
- sccr = immap->im_clkrst.car_sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-
- scmr = immap->im_clkrst.car_scmr;
- corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
- pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
- cp = &corecnf_tab[corecnf];
-
- puts (CPU_ID_STR " Clock Configuration\n - Bus-to-Core Mult ");
-
- switch (cp->b2c_mult) {
- case _byp:
- puts ("BYPASS");
- break;
-
- case _off:
- puts ("OFF");
- break;
-
- case _unk:
- puts ("UNKNOWN");
- break;
-
- default:
- printf ("%d%sx",
- cp->b2c_mult / 2,
- (cp->b2c_mult % 2) ? ".5" : "");
- break;
- }
-
- printf (", VCO Div %d, 60x Bus Freq %s, Core Freq %s\n",
- cp->vco_div, cp->freq_60x, cp->freq_core);
-
- printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, "
- "plldf %ld, pllmf %ld, pcidf %ld\n",
- dfbrg, corecnf, busdf, cpmdf,
- plldf, pllmf, pcidf);
-
- printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
- gd->vco_out, gd->scc_clk, gd->brg_clk);
-
- printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
- gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
-#ifdef CONFIG_PCI
- printf (" - pci_clk %10ld\n", gd->pci_clk);
-#endif
- putc ('\n');
-
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*-----------------------------------------------------------------------
- * Timer value for timer 2, ICLK = 10
- *
- * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
- * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
- *
- * SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
- * SPEED_TMR2_PS prescaler
- */
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
-
-/*-----------------------------------------------------------------------
- * Timer value for PIT
- *
- * PIT_TIME = SPEED_PITC / PITRTCLK
- * PITRTCLK = 8192
- */
-#define SPEED_PITC (82 << 16) /* start counting from 82 */
-
-/*
- * The new value for PTA is calculated from
- *
- * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock !)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- * DFBRG For normal mode (no clock reduction) always 0
- * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
- * NCS Number of SDRAM banks (chip selects) on this UPM.
- */
+++ /dev/null
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8260 CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <asm/cpm_8260.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <net.h>
-
-#if defined(CONFIG_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0x2000 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000
-#endif
-
-#define CPM_SPI_BASE 0x100
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER 0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
- unsigned int dpaddr;
-
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- *(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
-/* 1 */
- /* ------------------------------------------------
- * Initialize Port D SPI pins
- * (we are only in Master Mode !)
- * ------------------------------------------------ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PPARD[16] = 1 [0x00008000] (SPIMISO)
- * PPARD[17] = 1 [0x00004000] (SPIMOSI)
- * PPARD[18] = 1 [0x00002000] (SPICLK)
- * PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM)
- * -------------------------------------------- */
- immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */
- immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */
-
- /* ----------------------------------------------
- * In/Out or per. Function 0/1
- * PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO
- * PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI
- * PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK
- * PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM
- * ---------------------------------------------- */
- immr->im_ioport.iop_pdird &= ~0x0000E000;
- immr->im_ioport.iop_pdird |= 0x00080000;
-
- /* ----------------------------------------------
- * special option reg.
- * PSORD[16] = 1 [0x00008000] -> SPIMISO
- * PSORD[17] = 1 [0x00004000] -> SPIMOSI
- * PSORD[18] = 1 [0x00002000] -> SPICLK
- * ---------------------------------------------- */
- immr->im_ioport.iop_psord |= 0x0000E000;
-
- /* Initialize the parameter ram.
- * We need to make sure many things are initialized to zero
- */
- spi->spi_rstate = 0;
- spi->spi_rdp = 0;
- spi->spi_rbptr = 0;
- spi->spi_rbc = 0;
- spi->spi_rxtmp = 0;
- spi->spi_tstate = 0;
- spi->spi_tdp = 0;
- spi->spi_tbptr = 0;
- spi->spi_tbc = 0;
- spi->spi_txtmp = 0;
-
- /* Allocate space for one transmit and one receive buffer
- * descriptor in the DP ram
- */
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = m8260_cpm_dpalloc (sizeof(cbd_t)*2, 8);
-#else
- dpaddr = CPM_SPI_BASE;
-#endif
-
-/* 3 */
- /* Set up the SPI parameters in the parameter ram */
- spi->spi_rbase = dpaddr;
- spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
- /***********IMPORTANT******************/
-
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
- */
- spi->spi_rbptr = spi->spi_rbase;
- spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
- /* Init SPI Tx + Rx Parameters */
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
-
-/* 6 */
- /* Set to big endian. */
- spi->spi_tfcr = CPMFCR_EB;
- spi->spi_rfcr = CPMFCR_EB;
-
-/* 7 */
- /* Set maximum receive size. */
- spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- tbdf->cbd_sc &= ~BD_SC_READY;
- rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
- /* Set the bd's rx and tx buffer address pointers */
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
- immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
- immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
-
-
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *) malloc (MAX_BUFFER);
- txbuf = (uchar *) malloc (MAX_BUFFER);
-
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile spi_t *spi;
- cbd_t *tbdf, *rbdf;
- int tm;
-
- DPRINT (("*** spi_xfer entered ***\n"));
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- /* Board-specific: Set CS for device (ATC EEPROM) */
- immr->im_ioport.iop_pdatd &= ~0x00080000;
-
- /* Setting tx bd status and data length */
- tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
- tbdf->cbd_datlen = count;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
- tbdf->cbd_datlen));
-
- /* Setting rx bd status and data length */
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- rbdf->cbd_datlen = 0; /* rx length has no significance */
-
- immr->im_spi.spi_spmode = SPMODE_REV |
- SPMODE_MSTR |
- SPMODE_EN |
- SPMODE_LEN(8) | /* 8 Bits per char */
- SPMODE_PM(0x8) ; /* medium speed */
- immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
- immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */
- DPRINT (("*** spi_xfer: Tx buffer empty\n"));
- break;
- }
- if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
- DPRINT (("*** spi_xfer: Tx BD done\n"));
- break;
- }
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
- DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
- printf ("\n");
-#endif
-
- /* Clear CS for device */
- immr->im_ioport.iop_pdatd |= 0x00080000;
-
- return count;
-}
-#endif /* CONFIG_SPI */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards
- */
-#include <config.h>
-#include <mpc8260.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_8260 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
- GOT_ENTRY(environment)
-#endif
- END_GOT
-
-/*
- * Version string - must be in data segment because MPC8260 uses the first
- * 256 bytes for the Hard Reset Configuration Word table (see below).
- * Similarly, can't have the U-Boot Magic Number as the first thing in
- * the image - don't know how this will affect the image tools, but I guess
- * I'll find out soon
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Hard Reset Configuration Word (HRCW) table
- *
- * The Hard Reset Configuration Word (HRCW) sets a number of useful things
- * such as whether there is an external memory controller, whether the
- * PowerPC core is disabled (i.e. only the communications processor is
- * active, accessed by another CPU on the bus), whether using external
- * arbitration, external bus mode, boot port size, core initial prefix,
- * internal space base, boot memory space, etc.
- *
- * These things dictate where the processor begins execution, where the
- * boot ROM appears in memory, the memory controller setup when access
- * boot ROM, etc. The HRCW is *extremely* important.
- *
- * The HRCW is read from the bus during reset. One CPU on the bus will
- * be a hard reset configuration master, any others will be hard reset
- * configuration slaves. The master reads eight HRCWs from flash during
- * reset - the first it uses for itself, the other 7 it communicates to
- * up to 7 configuration slaves by some complicated mechanism, which is
- * not really important here.
- *
- * The configuration master performs 32 successive reads starting at address
- * 0 and incrementing by 8 each read (i.e. on 64 bit boundaries) but only 8
- * bits is read, and always from byte lane D[0-7] (so that port size of the
- * boot device does not matter). The first four reads form the 32 bit HRCW
- * for the master itself. The second four reads form the HRCW for the first
- * slave, and so on, up to seven slaves. The 32 bit HRCW is formed by
- * concatenating the four bytes, with the first read placed in byte 0 (the
- * most significant byte), and so on with the fourth read placed in byte 3
- * (the least significant byte).
- */
-#define _HRCW_TABLE_ENTRY(w) \
- .fill 8,1,(((w)>>24)&0xff); \
- .fill 8,1,(((w)>>16)&0xff); \
- .fill 8,1,(((w)>> 8)&0xff); \
- .fill 8,1,(((w) )&0xff)
- .text
- .globl _hrcw_table
-_hrcw_table:
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7)
-/*
- * After configuration, a system reset exception is executed using the
- * vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP]
- * is 0, the base address is 0x00000000. If MSR[IP] is 1, the base address
- * is 0xfff00000. In the case of a Power On Reset or Hard Reset, the value
- * of MSR[IP] is determined by the CIP field in the HRCW.
- *
- * Other bits in the HRCW set up the Base Address and Port Size in BR0.
- * This determines the location of the boot ROM (flash or EPROM) in the
- * processor's address space at boot time. As long as the HRCW is set up
- * so that we eventually end up executing the code below when the processor
- * executes the reset exception, the actual values used should not matter.
- *
- * Once we have got here, the address mask in OR0 is cleared so that the
- * bottom 32K of the boot ROM is effectively repeated all throughout the
- * processor's address space, after which we can jump to the absolute
- * address at which the boot ROM was linked at compile time, and proceed
- * to initialise the memory controller without worrying if the rug will be
- * pulled out from under us, so to speak (it will be fine as long as we
- * configure BR0 with the same boot ROM link address).
- */
- . = EXC_OFF_SYS_RESET
-
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
- lis r3, CONFIG_SYS_DEFAULT_IMMR@h
- nop
- lwz r4, 0(r3)
- nop
- rlwinm r4, r4, 0, 8, 5
- nop
- oris r4, r4, 0x0200
- nop
- stw r4, 0(r3)
- nop
-#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
-boot_warm:
- mfmsr r5 /* save msr contents */
-
-#if defined(CONFIG_COGENT)
- /* this is what the cogent EPROM does */
- li r0, 0
- mtmsr r0
- isync
- bl cogent_init_8260
-#endif /* CONFIG_COGENT */
-
-#if defined(CONFIG_SYS_DEFAULT_IMMR)
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
- lis r4, CONFIG_SYS_DEFAULT_IMMR@h
- stw r3, 0x1A8(r4)
-#endif /* CONFIG_SYS_DEFAULT_IMMR */
-
- /* Initialise the MPC8260 processor core */
- /*--------------------------------------------------------------*/
-
- bl init_8260_core
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* When booting from ROM (Flash or EPROM), clear the */
- /* Address Mask in OR0 so ROM appears everywhere */
- /*--------------------------------------------------------------*/
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
- lwz r4, IM_OR0@l(r3)
- li r5, 0x7fff
- and r4, r4, r5
- stw r4, IM_OR0@l(r3)
-
- /* Calculate absolute address in FLASH and jump there */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* set up stack in internal DPRAM */
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
-#ifdef DEBUG
- bl init_debug /* set up debugging stuff */
-#endif
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-#if defined(CONFIG_COGENT)
-
-/*
- * This code initialises the MPC8260 processor core
- * (conforms to PowerPC 603e spec)
- */
-
- .globl cogent_init_8260
-cogent_init_8260:
-
- /* Taken from page 14 of CMA282 manual */
- /*--------------------------------------------------------------*/
-
- lis r4, (CONFIG_SYS_IMMR+IM_REGBASE)@h
- lis r3, CONFIG_SYS_IMMR@h
- stw r3, IM_IMMR@l(r4)
- lwz r3, IM_IMMR@l(r4)
- stw r3, 0(r0)
- lis r3, CONFIG_SYS_SYPCR@h
- ori r3, r3, CONFIG_SYS_SYPCR@l
- stw r3, IM_SYPCR@l(r4)
- lwz r3, IM_SYPCR@l(r4)
- stw r3, 4(r0)
- lis r3, CONFIG_SYS_SCCR@h
- ori r3, r3, CONFIG_SYS_SCCR@l
- stw r3, IM_SCCR@l(r4)
- lwz r3, IM_SCCR@l(r4)
- stw r3, 8(r0)
-
- /* the rest of this was disassembled from the */
- /* EPROM code that came with my CMA282 CPU module */
- /*--------------------------------------------------------------*/
-
- lis r1, 0x1234
- ori r1, r1, 0x5678
- stw r1, 0x20(r0)
- lwz r1, 0x20(r0)
- stw r1, 0x24(r0)
- lwz r1, 0x24(r0)
- lis r3, 0x0e80
- ori r3, r3, 0
- stw r1, 4(r3)
- lwz r1, 4(r3)
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-#endif /* CONFIG_COGENT */
-
-/*
- * This code initialises the MPC8260 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_8260_core
-init_8260_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialise the SYPCR early, and reset the watchdog (if req) */
- /*--------------------------------------------------------------*/
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-#if !defined(CONFIG_COGENT)
- lis r4, CONFIG_SYS_SYPCR@h
- ori r4, r4, CONFIG_SYS_SYPCR@l
- stw r4, IM_SYPCR@l(r3)
-#endif /* !CONFIG_COGENT */
-#if defined(CONFIG_WATCHDOG)
- li r4, 21868 /* = 0x556c */
- sth r4, IM_SWSR@l(r3)
- li r4, -21959 /* = 0xaa39 */
- sth r4, IM_SWSR@l(r3)
-#endif /* CONFIG_WATCHDOG */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- mtspr HID2, r3
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-#ifdef DEBUG
-
-/*
- * initialise things related to debugging.
- *
- * must be called after the global offset table (GOT) is initialised
- * (GET_GOT) and after cpu_init_f() has executed.
- */
-
- .globl init_debug
-init_debug:
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-
- /* Quick and dirty hack to enable the RAM and copy the */
- /* vectors so that we can take exceptions. */
- /*--------------------------------------------------------------*/
- /* write Memory Refresh Prescaler */
- li r4, CONFIG_SYS_MPTPR
- sth r4, IM_MPTPR@l(r3)
- /* write 60x Refresh Timer */
- li r4, CONFIG_SYS_PSRT
- stb r4, IM_PSRT@l(r3)
- /* init the 60x SDRAM Mode Register */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l
- stw r4, IM_PSDMR@l(r3)
- /* write Precharge All Banks command */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* write eight CBR Refresh commands */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- /* write Mode Register Write command */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* write Normal Operation command and enable Refresh */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* RAM should now be operational */
-
-#define VEC_WRD_CNT ((_end_of_vectors - _start + EXC_OFF_SYS_RESET) / 4)
- mflr r3
- GET_GOT
- mtlr r3
- lwz r3, GOT(_end_of_vectors)
- rlwinm r4, r3, 0, 18, 31 /* _end_of_vectors & 0x3FFF */
- lis r5, VEC_WRD_CNT@h
- ori r5, r5, VEC_WRD_CNT@l
- mtctr r5
-1:
- lwzu r5, -4(r3)
- stwu r5, -4(r4)
- bdnz 1b
-
- /* Load the Instruction Address Breakpoint Register (IABR). */
- /* */
- /* The address to load is stored in the first word of dual port */
- /* ram and should be preserved while the power is on, so you */
- /* can plug addresses into that location then reset the cpu and */
- /* this code will load that address into the IABR after the */
- /* reset. */
- /* */
- /* When the program counter matches the contents of the IABR, */
- /* an exception is generated (before the instruction at that */
- /* location completes). The vector for this exception is 0x1300 */
- /*--------------------------------------------------------------*/
- lis r3, CONFIG_SYS_IMMR@h
- lwz r3, 0(r3)
- mtspr IABR, r3
-
- /* Set the entire dual port RAM (where the initial stack */
- /* resides) to a known value - makes it easier to see where */
- /* the stack has been written */
- /*--------------------------------------------------------------*/
- lis r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l
- li r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4)
- mtctr r4
- lis r4, 0xdeadbeaf@h
- ori r4, r4, 0xdeadbeaf@l
-1:
- stwu r4, -4(r3)
- bdnz 1b
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-#endif
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_DCE
- lis r4, 0
- ori r4, r4, HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
- lwz r4,GOT(_end)
-#endif
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/m8260_pci.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- putc ('\n');
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-#ifdef CONFIG_PCI
-void dump_pci (void)
-{
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- printf ("PCI: err status %x err mask %x err ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_esr),
- le32_to_cpu (immap->im_pci.pci_emr),
- le32_to_cpu (immap->im_pci.pci_ecr));
- printf (" error address %x error data %x ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_eacr),
- le32_to_cpu (immap->im_pci.pci_edcr),
- le32_to_cpu (immap->im_pci.pci_eccr));
-
-}
-#endif
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
-#ifdef CONFIG_PCI
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-#ifdef DEBUG
- dump_pci();
-#endif
- /* clear the error in the error status register */
- if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
- immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
- return;
- }
-#endif
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check in kernel mode.\n"
- "Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- puts ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000>>15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-#ifdef CONFIG_PCI
- dump_pci();
-#endif
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc8260/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-
-COBJS-y += traps.o
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-COBJS-y += speed.o
-COBJS-y += interrupts.o
-COBJS-y += spd_sdram.o
-COBJS-y += ecc.o
-COBJS-$(CONFIG_QE) += qe_io.o
-COBJS-$(CONFIG_FSL_SERDES) += serdes.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-$(CONFIG_PCIE) += pcie.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-
-COBJS := $(COBJS-y)
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
- -ffixed-r2 -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc83xx/u-boot.lds
+++ /dev/null
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC83xx family.
- *
- * Derived from the MPC8260 and MPC85xx.
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-#include <libfdt.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <fsl_esdhc.h>
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-#include <asm/immap_qe.h>
-#include <asm/io.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu(void)
-{
- volatile immap_t *immr;
- ulong clock = gd->cpu_clk;
- u32 pvr = get_pvr();
- u32 spridr;
- char buf[32];
- int i;
-
- const struct cpu_type {
- char name[15];
- u32 partid;
- } cpu_type_list [] = {
- CPU_TYPE_ENTRY(8311),
- CPU_TYPE_ENTRY(8313),
- CPU_TYPE_ENTRY(8314),
- CPU_TYPE_ENTRY(8315),
- CPU_TYPE_ENTRY(8321),
- CPU_TYPE_ENTRY(8323),
- CPU_TYPE_ENTRY(8343),
- CPU_TYPE_ENTRY(8347_TBGA_),
- CPU_TYPE_ENTRY(8347_PBGA_),
- CPU_TYPE_ENTRY(8349),
- CPU_TYPE_ENTRY(8358_TBGA_),
- CPU_TYPE_ENTRY(8358_PBGA_),
- CPU_TYPE_ENTRY(8360),
- CPU_TYPE_ENTRY(8377),
- CPU_TYPE_ENTRY(8378),
- CPU_TYPE_ENTRY(8379),
- };
-
- immr = (immap_t *)CONFIG_SYS_IMMR;
-
- puts("CPU: ");
-
- switch (pvr & 0xffff0000) {
- case PVR_E300C1:
- printf("e300c1, ");
- break;
-
- case PVR_E300C2:
- printf("e300c2, ");
- break;
-
- case PVR_E300C3:
- printf("e300c3, ");
- break;
-
- case PVR_E300C4:
- printf("e300c4, ");
- break;
-
- default:
- printf("Unknown core, ");
- }
-
- spridr = immr->sysconf.spridr;
-
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
- if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
- puts("MPC");
- puts(cpu_type_list[i].name);
- if (IS_E_PROCESSOR(spridr))
- puts("E");
- if (REVID_MAJOR(spridr) >= 2)
- puts("A");
- printf(", Rev: %d.%d", REVID_MAJOR(spridr),
- REVID_MINOR(spridr));
- break;
- }
-
- if (i == ARRAY_SIZE(cpu_type_list))
- printf("(SPRIDR %08x unknown), ", spridr);
-
- printf(" at %s MHz, ", strmhz(buf, clock));
-
- printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
-
- return 0;
-}
-
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM. The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM. To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want. Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array. Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile fsl_lbus_t *lbus = &immap->lbus;
- volatile uchar *dummy = NULL;
- const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
- volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
- uint i;
-
- /* Scan all the banks to determine the base address of the device */
- for (i = 0; i < 8; i++) {
- if ((lbus->bank[i].br & BR_MSEL) == msel) {
- dummy = (uchar *) (lbus->bank[i].br & BR_BA);
- break;
- }
- }
-
- if (!dummy) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
- *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
- for (i = 0; i < size; i++) {
- lbus->mdr = table[i];
- __asm__ __volatile__ ("sync");
- *dummy = 0; /* Write the value to memory and increment MAD */
- __asm__ __volatile__ ("sync");
- while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
- }
-
- /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
- *mxmr &= 0xCFFFFFC0;
-}
-
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
-#ifndef MPC83xx_RESET
- ulong addr;
-#endif
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- puts("Resetting the board.\n");
-
-#ifdef MPC83xx_RESET
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~( MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* enable Reset Control Reg */
- immap->reset.rpr = 0x52535445;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* confirm Reset Control Reg is enabled */
- while(!((immap->reset.rcer) & RCER_CRE));
-
- udelay(200);
-
- /* perform reset, only one bit */
- immap->reset.rcr = RCR_SWHR;
-
-#else /* ! MPC83xx_RESET */
-
- immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
- addr = CONFIG_SYS_RESET_ADDRESS;
-
- ((void (*)(void)) addr) ();
-#endif /* MPC83xx_RESET */
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-
-unsigned long get_tbclk(void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return tbclk;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts();
-
- /* Reset the 83xx watchdog */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- immr->wdt.swsrr = 0x556c;
- immr->wdt.swsrr = 0xaa39;
-
- if (re_enable)
- enable_interrupts ();
-}
-#endif
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_UEC_ETH)
- uec_standard_init(bis);
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
- tsec_standard_init(bis);
-#endif
- return 0;
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
- return fsl_esdhc_mmc_init(bis);
-#else
- return 0;
-#endif
-}
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-#if !defined(CONFIG_MPC8360)
-#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
-#endif
-
-#if !defined(CONFIG_BOOTCOUNT_ADDR)
-#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
-#endif
-
-#include <asm/io.h>
-
-void bootcount_store (ulong a)
-{
- void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
- out_be32 (reg, a);
- out_be32 (reg + 4, BOOTCOUNT_MAGIC);
-}
-
-ulong bootcount_load (void)
-{
- void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
-
- if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
- return 0;
- else
- return in_be32 (reg);
-}
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
+++ /dev/null
-/*
- * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <ioports.h>
-#include <asm/io.h>
-#ifdef CONFIG_USB_EHCI_FSL
-#include <usb/ehci-fsl.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_QE
-extern qe_iop_conf_t qe_iop_conf_tab[];
-extern void qe_config_iopin(u8 port, u8 pin, int dir,
- int open_drain, int assign);
-extern void qe_init(uint qe_base);
-extern void qe_reset(void);
-
-static void config_qe_ioports(void)
-{
- u8 port, pin;
- int dir, open_drain, assign;
- int i;
-
- for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
- port = qe_iop_conf_tab[i].port;
- pin = qe_iop_conf_tab[i].pin;
- dir = qe_iop_conf_tab[i].dir;
- open_drain = qe_iop_conf_tab[i].open_drain;
- assign = qe_iop_conf_tab[i].assign;
- qe_config_iopin(port, pin, dir, open_drain, assign);
- }
-}
-#endif
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
- __be32 acr_mask =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
- (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
- (ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
- (ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
- (ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
- 0;
- __be32 acr_val =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
- (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
- (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
- 0;
- __be32 spcr_mask =
-#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
- (SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
- (SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
- (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
- (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
- 0;
- __be32 spcr_val =
-#ifdef CONFIG_SYS_SPCR_OPT
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
- (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
- (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
- (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
- 0;
- __be32 sccr_mask =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
- (SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
- (SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
- (SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
- (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
- (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
- (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
- (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
- (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
- (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
- (SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
- 0;
- __be32 sccr_val =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
- (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
- (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
- (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
- (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
- (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
- (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
- (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
- (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
- (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
- (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
- 0;
- __be32 lcrr_mask =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
- LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
- LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
- LCRR_CLKDIV |
-#endif
- 0;
- __be32 lcrr_val =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
- CONFIG_SYS_LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC
- CONFIG_SYS_LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
- CONFIG_SYS_LCRR_CLKDIV |
-#endif
- 0;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
- clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
-
- clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
-
- clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
-
- /* RSR - Reset Status Register - clear all status (4.6.1.3) */
- gd->reset_status = __raw_readl(&im->reset.rsr);
- __raw_writel(~(RSR_RES), &im->reset.rsr);
-
- /* AER - Arbiter Event Register - store status */
- gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
- gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
-
- /*
- * RMR - Reset Mode Register
- * contains checkstop reset enable (4.6.1.4)
- */
- __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
-
- /* LCRR - Clock Ratio Register (10.3.1.16)
- * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
- */
- clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
- __raw_readl(&im->lbus.lcrr);
- isync();
-
- /* Enable Time Base & Decrementer ( so we will have udelay() )*/
- setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
-
- /* System General Purpose Register */
-#ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
- /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
- __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
- &im->sysconf.sicrh);
-#else
- __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
-#endif
-#endif
-#ifdef CONFIG_SYS_SICRL
- __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
-#endif
-#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
- __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
-#endif
-#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
- __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
-#endif
-
-#ifdef CONFIG_QE
- /* Config QE ioports */
- config_qe_ioports();
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_BR0_PRELIM) \
- && defined(CONFIG_SYS_OR0_PRELIM) \
- && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
- && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
- im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
- im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
- im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
- im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
-#else
-#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
- im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
- im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
- im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
- im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
- im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
- im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
- im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
- im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
- im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
- im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
- im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
- im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
- im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
- im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
- im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
- im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
- im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
- im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
- im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
- im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
- im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
-#endif
-#ifdef CONFIG_SYS_GPIO1_PRELIM
- im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
- im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
-#endif
-#ifdef CONFIG_SYS_GPIO2_PRELIM
- im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
- im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
-#endif
-#ifdef CONFIG_USB_EHCI_FSL
-#ifndef CONFIG_MPC834x
- uint32_t temp;
- struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
-
- /* Configure interface. */
- setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
-
- /* Wait for clock to stabilize */
- do {
- temp = __raw_readl(&ehci->control);
- udelay(1000);
- } while (!(temp & PHY_CLK_VALID));
-#endif
-#endif
-}
-
-int cpu_init_r (void)
-{
-#ifdef CONFIG_QE
- uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
-
- qe_init(qe_base);
- qe_reset();
-#endif
- return 0;
-}
-
-/*
- * Print out the bus arbiter event
- */
-#if defined(CONFIG_DISPLAY_AER_FULL)
-static int print_83xx_arb_event(int force)
-{
- static char* event[] = {
- "Address Time Out",
- "Data Time Out",
- "Address Only Transfer Type",
- "External Control Word Transfer Type",
- "Reserved Transfer Type",
- "Transfer Error",
- "reserved",
- "reserved"
- };
- static char* master[] = {
- "e300 Core Data Transaction",
- "reserved",
- "e300 Core Instruction Fetch",
- "reserved",
- "TSEC1",
- "TSEC2",
- "USB MPH",
- "USB DR",
- "Encryption Core",
- "I2C Boot Sequencer",
- "JTAG",
- "reserved",
- "eSDHC",
- "PCI1",
- "PCI2",
- "DMA",
- "QUICC Engine 00",
- "QUICC Engine 01",
- "QUICC Engine 10",
- "QUICC Engine 11",
- "reserved",
- "reserved",
- "reserved",
- "reserved",
- "SATA1",
- "SATA2",
- "SATA3",
- "SATA4",
- "reserved",
- "PCI Express 1",
- "PCI Express 2",
- "TDM-DMAC"
- };
- static char *transfer[] = {
- "Address-only, Clean Block",
- "Address-only, lwarx reservation set",
- "Single-beat or Burst write",
- "reserved",
- "Address-only, Flush Block",
- "reserved",
- "Burst write",
- "reserved",
- "Address-only, sync",
- "Address-only, tlbsync",
- "Single-beat or Burst read",
- "Single-beat or Burst read",
- "Address-only, Kill Block",
- "Address-only, icbi",
- "Burst read",
- "reserved",
- "Address-only, eieio",
- "reserved",
- "Single-beat write",
- "reserved",
- "ecowx - Illegal single-beat write",
- "reserved",
- "reserved",
- "reserved",
- "Address-only, TLB Invalidate",
- "reserved",
- "Single-beat or Burst read",
- "reserved",
- "eciwx - Illegal single-beat read",
- "reserved",
- "Burst read",
- "reserved"
- };
-
- int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
- >> AEATR_EVENT_SHIFT;
- int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
- >> AEATR_MSTR_ID_SHIFT;
- int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
- >> AEATR_TBST_SHIFT;
- int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
- >> AEATR_TSIZE_SHIFT;
- int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
- >> AEATR_TTYPE_SHIFT;
-
- if (!force && !gd->arbiter_event_address)
- return 0;
-
- puts("Arbiter Event Status:\n");
- printf(" Event Address: 0x%08lX\n", gd->arbiter_event_address);
- printf(" Event Type: 0x%1x = %s\n", etype, event[etype]);
- printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]);
- printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize,
- tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
- printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
-
- return gd->arbiter_event_address;
-}
-
-#elif defined(CONFIG_DISPLAY_AER_BRIEF)
-
-static int print_83xx_arb_event(int force)
-{
- if (!force && !gd->arbiter_event_address)
- return 0;
-
- printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
- gd->arbiter_event_attributes, gd->arbiter_event_address);
-
- return gd->arbiter_event_address;
-}
-#endif /* CONFIG_DISPLAY_AER_xxxx */
-
-/*
- * Figure out the cause of the reset
- */
-int prt_83xx_rsr(void)
-{
- static struct {
- ulong mask;
- char *desc;
- } bits[] = {
- {
- RSR_SWSR, "Software Soft"}, {
- RSR_SWHR, "Software Hard"}, {
- RSR_JSRS, "JTAG Soft"}, {
- RSR_CSHR, "Check Stop"}, {
- RSR_SWRS, "Software Watchdog"}, {
- RSR_BMRS, "Bus Monitor"}, {
- RSR_SRS, "External/Internal Soft"}, {
- RSR_HRS, "External/Internal Hard"}
- };
- static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
- int i;
- char *sep;
-
- puts("Reset Status:");
-
- sep = " ";
- for (i = 0; i < n; i++)
- if (rsr & bits[i].mask) {
- printf("%s%s", sep, bits[i].desc);
- sep = ", ";
- }
- puts("\n");
-
-#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
- print_83xx_arb_event(rsr & RSR_BMRS);
-#endif
- puts("\n");
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on the contribution of Marian Balakowicz <m8@semihalf.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n",
- (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
- ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
- ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
- ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
- ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr;
- u32 count;
- register u64 *i;
- u32 ret[2];
- u32 pattern[2];
- u32 writeback[2];
-
- /* The pattern is written into memory to generate error */
- pattern[0] = 0xfedcba98UL;
- pattern[1] = 0x76543210UL;
-
- /* After injecting error, re-initialize the memory with the value */
- writeback[0] = 0x01234567UL;
- writeback[1] = 0x89abcdefUL;
-
- if (argc > 4) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, "
- "should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
- if (argc == 4) {
- if (strcmp(argv[1], "testdw") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- ppcDWstore((u32 *) i, pattern);
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* read data, this generates ECC error */
- ppcDWload((u32 *) i, ret);
- __asm__ __volatile__("sync");
-
- /* re-initialize memory, double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- if (strcmp(argv[1], "testword") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- *(u32 *) i = 0xfedcba98UL;
- __asm__ __volatile__("sync");
-
- /* sub double word write,
- * bus will read-modify-write,
- * generates ECC error */
- *((u32 *) i + 1) = 0x76543210UL;
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* re-initialize memory,
- * double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- }
- cmd_usage(cmdtp);
- return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
- "support for DDR ECC features",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with double word access\n"
- " - disables injects\n"
- " - reads pattern back with double word access, generates error\n"
- " - re-inits memory\n"
- "ecc testword <addr> <cnt> - test mem region with word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with word access\n"
- " - writes pattern with word access, generates error\n"
- " - disables injects\n" " - re-inits memory");
-#endif
+++ /dev/null
-/*
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-
-extern void ft_qe_setup(void *blob);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
-#include <asm/immap_qe.h>
-
-void fdt_fixup_muram (void *blob)
-{
- ulong data[2];
-
- data[0] = 0;
- data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
- do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
- data, sizeof (data), 0);
-}
-#endif
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- int spridr = immr->sysconf.spridr;
-
- /*
- * delete crypto node if not on an E-processor
- * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
- * EA revisions got the SEC uprevved to 2.4 but since the default device
- * tree contains SEC 2.0 properties we uprev them here.
- */
- if (!IS_E_PROCESSOR(spridr))
- fdt_fixup_crypto_node(blob, 0);
- else if (IS_E_PROCESSOR(spridr) &&
- (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
- SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
- REVID_MAJOR(spridr) >= 2)
- fdt_fixup_crypto_node(blob, 0x0204);
-
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
- defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
- fdt_fixup_ethernet(blob);
-#ifdef CONFIG_MPC8313
- /*
- * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
- * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
- * so if on Rev. 2 (and higher) h/w, we fix them up here
- */
- if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
- int nodeoffset, path;
- const char *prop;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
-#if defined(CONFIG_HAS_ETH0)
- prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
- if (prop) {
- u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
-
- path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
- if (prop)
- fdt_setprop(blob, path, "interrupts",
- &tmp, sizeof(tmp));
- }
-#endif
-#if defined(CONFIG_HAS_ETH1)
- prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
- if (prop) {
- u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
-
- path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
- if (prop)
- fdt_setprop(blob, path, "interrupts",
- &tmp, sizeof(tmp));
- }
-#endif
- }
- }
-#endif
-#endif
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", (bd->bi_busfreq / 4), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", gd->core_clk, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,soc",
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,soc",
- "clock-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,immr",
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,immr",
- "clock-frequency", bd->bi_busfreq, 1);
-#ifdef CONFIG_QE
- ft_qe_setup(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
- fdt_fixup_muram (blob);
-#endif
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
-
- /* Enable e300 time base */
-
- immr->sysconf.spcr |= 0x00400000;
-
- return 0;
-}
-
-
-/*
- * Handle external interrupts
- */
-
-void external_interrupt (struct pt_regs *regs)
-{
-}
-
-
-/*
- * Install and free an interrupt handler.
- */
-
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
-}
-
-
-void irq_free_handler (int irq)
-{
-}
-
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-
-#if defined(CONFIG_CMD_IRQ)
-
-/* ripped this out of ppc4xx/interrupts.c */
-
-/*
- * irqinfo - print information about PCI devices
- */
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
- int i;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_SPCR_OPT
- /* Optimize transactions between CSB and other devices */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
-#endif
-
- /* Enable Time Base & Decrimenter (so we will have udelay()) */
- im->sysconf.spcr |= SPCR_TBEN;
-
- /* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
-#endif
- /* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
- im->sysconf.obir = CONFIG_SYS_OBIR;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
- && defined(CONFIG_SYS_NAND_OR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
- im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
- im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
- im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
- im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
-#else
-#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
-#endif
-}
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk(void)
-{
- return (gd->bus_clk + 3L) / 4L;
-}
-
-void puts(const char *str)
-{
- while (*str)
- putc(*str++);
-}
+++ /dev/null
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2007
- *
- * Author: Scott Wood <scottwood@freescale.com>,
- * with some bits from older board-specific PCI initialization.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#include <asm/mpc8349_pci.h>
-
-#define MAX_BUSES 2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_controller pci_hose[MAX_BUSES];
-static int pci_num_buses;
-
-static void pci_init_bus(int bus, struct pci_region *reg)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile pot83xx_t *pot = immr->ios.pot;
- volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
- struct pci_controller *hose = &pci_hose[bus];
- u32 dev;
- u16 reg16;
- int i;
-
- if (bus == 1)
- pot += 3;
-
- /* Setup outbound translation windows */
- for (i = 0; i < 3; i++, reg++, pot++) {
- if (reg->size == 0)
- break;
-
- hose->regions[i] = *reg;
- hose->region_count++;
-
- pot->potar = reg->bus_start >> 12;
- pot->pobar = reg->phys_start >> 12;
- pot->pocmr = ~(reg->size - 1) >> 12;
-
- if (reg->flags & PCI_REGION_IO)
- pot->pocmr |= POCMR_IO;
-#ifdef CONFIG_83XX_PCI_STREAMING
- else if (reg->flags & PCI_REGION_PREFETCH)
- pot->pocmr |= POCMR_SE;
-#endif
-
- if (bus == 1)
- pot->pocmr |= POCMR_DST;
-
- pot->pocmr |= POCMR_EN;
- }
-
- /* Point inbound translation at RAM */
- pci_ctrl->pitar1 = 0;
- pci_ctrl->pibar1 = 0;
- pci_ctrl->piebar1 = 0;
- pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
- PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
-
- i = hose->region_count++;
- hose->regions[i].bus_start = 0;
- hose->regions[i].phys_start = 0;
- hose->regions[i].size = gd->ram_size;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- hose->first_busno = pci_last_busno() + 1;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
- CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
-
- pci_register_hose(hose);
-
- /*
- * Write to Command register
- */
- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-#ifndef CONFIG_PCISLAVE
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-
-/*
- * The caller must have already set OCCR, and the PCI_LAW BARs
- * must have been set to cover all of the requested regions.
- *
- * If fewer than three regions are requested, then the region
- * list is terminated with a region of size 0.
- */
-void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- int i;
-
- if (num_buses > MAX_BUSES) {
- printf("%d PCI buses requsted, %d supported\n",
- num_buses, MAX_BUSES);
-
- num_buses = MAX_BUSES;
- }
-
- pci_num_buses = num_buses;
-
- /*
- * Release PCI RST Output signal.
- * Power on to RST high must be at least 100 ms as per PCI spec.
- * On warm boots only 1 ms is required.
- */
- udelay(warmboot ? 1000 : 100000);
-
- for (i = 0; i < num_buses; i++)
- immr->pci_ctrl[i].gcr = 1;
-
- /*
- * RST high to first config access must be at least 2^25 cycles
- * as per PCI spec. This could be cut in half if we know we're
- * running at 66MHz. This could be insufficiently long if we're
- * running the PCI bus at significantly less than 33MHz.
- */
- udelay(1020000);
-
- for (i = 0; i < num_buses; i++)
- pci_init_bus(i, reg[i]);
-}
-
-#ifdef CONFIG_PCISLAVE
-
-#define PCI_FUNCTION_CONFIG 0x44
-#define PCI_FUNCTION_CFG_LOCK 0x20
-
-/*
- * Unlock the configuration bit so that the host system can begin booting
- *
- * This should be used after you have:
- * 1) Called mpc83xx_pci_init()
- * 2) Set up your inbound translation windows to the appropriate size
- */
-void mpc83xx_pcislave_unlock(int bus)
-{
- struct pci_controller *hose = &pci_hose[bus];
- u32 dev;
- u16 reg16;
-
- /* Unlock configuration lock in PCI function configuration register */
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16);
- reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
- pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
-
- /* The configuration bit is now unlocked, so we can scan the bus */
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int tmp[2];
- const char *path;
-
- if (pci_num_buses < 1)
- return;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
- path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
-
- if (pci_num_buses < 2)
- return;
-
- path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
- }
-}
-#endif /* CONFIG_OF_LIBFDT */
+++ /dev/null
-/*
- * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
- * Copyright (C) 2008-2009 MontaVista Software, Inc.
- *
- * Authors: Tony Li <tony.li@freescale.com>
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PCIE_MAX_BUSES 2
-
-#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
-
-static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
-{
- int bus = PCI_BUS(dev) - hose->first_busno;
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- pex83xx_t *pex = &immr->pciexp[bus];
- struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
- u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
- u32 dev_base = bus << 24 | devfn << 16;
-
- if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
- return -1;
- /*
- * Workaround for the HW bug: for Type 0 configure transactions the
- * PCI-E controller does not check the device number bits and just
- * assumes that the device number bits are 0.
- */
- if (devfn & 0xf8)
- return -1;
-
- out_le32(&out_win->tarl, dev_base);
- return 0;
-}
-
-#define cfg_read(val, addr, type, op) \
- do { *val = op((type)(addr)); } while (0)
-#define cfg_write(val, addr, type, op) \
- do { op((type *)(addr), (val)); } while (0)
-
-#define cfg_read_err(val) do { *val = -1; } while (0)
-#define cfg_write_err(val) do { } while (0)
-
-#define PCIE_OP(rw, size, type, op) \
-static int pcie_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, \
- type val) \
-{ \
- int ret; \
- \
- ret = mpc83xx_pcie_remap_cfg(hose, dev); \
- if (ret) { \
- cfg_##rw##_err(val); \
- return ret; \
- } \
- cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \
- return 0; \
-}
-
-PCIE_OP(read, byte, u8 *, in_8)
-PCIE_OP(read, word, u16 *, in_le16)
-PCIE_OP(read, dword, u32 *, in_le32)
-PCIE_OP(write, byte, u8, out_8)
-PCIE_OP(write, word, u16, out_le16)
-PCIE_OP(write, dword, u32, out_le32)
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
- u8 link)
-{
- extern void disable_addr_trans(void); /* start.S */
- static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
- struct pci_controller *hose = &pcie_hose[bus];
- int i;
-
- /*
- * There are no spare BATs to remap all PCI-E windows for U-Boot, so
- * disable translations. In general, this is not great solution, and
- * that's why we don't register PCI-E hoses by default.
- */
- disable_addr_trans();
-
- for (i = 0; i < 2; i++, reg++) {
- if (reg->size == 0)
- break;
-
- hose->regions[i] = *reg;
- hose->region_count++;
- }
-
- i = hose->region_count++;
- hose->regions[i].bus_start = 0;
- hose->regions[i].phys_start = 0;
- hose->regions[i].size = gd->ram_size;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- i = hose->region_count++;
- hose->regions[i].bus_start = CONFIG_SYS_IMMR;
- hose->regions[i].phys_start = CONFIG_SYS_IMMR;
- hose->regions[i].size = 0x100000;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- hose->first_busno = pci_last_busno() + 1;
- hose->last_busno = 0xff;
-
- if (bus == 0)
- hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE;
- else
- hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- if (!link)
- hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
-
- pci_register_hose(hose);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#else
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
- u8 link) {}
-
-#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
-
-static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
-{
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- pex83xx_t *pex = &immr->pciexp[bus];
- struct pex_outbound_window *out_win;
- struct pex_inbound_window *in_win;
- void *hose_cfg_base;
- unsigned int ram_sz;
- unsigned int barl;
- unsigned int tar;
- u16 reg16;
- int i;
-
- /* Enable pex csb bridge inbound & outbound transactions */
- out_le32(&pex->bridge.pex_csb_ctrl,
- in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
- PEX_CSB_CTRL_IBPIOE);
-
- /* Enable bridge outbound */
- out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
- PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
- PEX_CSB_OBCTRL_CFGWE);
-
- out_win = &pex->bridge.pex_outbound_win[0];
- if (bus) {
- out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
- CONFIG_SYS_PCIE2_CFG_SIZE);
- out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE);
- } else {
- out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
- CONFIG_SYS_PCIE1_CFG_SIZE);
- out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE);
- }
- out_le32(&out_win->tarl, 0);
- out_le32(&out_win->tarh, 0);
-
- for (i = 0; i < 2; i++, reg++) {
- u32 ar;
-
- if (reg->size == 0)
- break;
-
- out_win = &pex->bridge.pex_outbound_win[i + 1];
- out_le32(&out_win->bar, reg->phys_start);
- out_le32(&out_win->tarl, reg->bus_start);
- out_le32(&out_win->tarh, 0);
- ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
- if (reg->flags & PCI_REGION_IO)
- ar |= PEX_OWAR_TYPE_IO;
- else
- ar |= PEX_OWAR_TYPE_MEM;
- out_le32(&out_win->ar, ar);
- }
-
- out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
-
- ram_sz = gd->ram_size;
- barl = 0;
- tar = 0;
- i = 0;
- while (ram_sz > 0) {
- in_win = &pex->bridge.pex_inbound_win[i];
- out_le32(&in_win->barl, barl);
- out_le32(&in_win->barh, 0x0);
- out_le32(&in_win->tar, tar);
- if (ram_sz >= 0x10000000) {
- /* The maxium windows size is 256M */
- out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
- PEX_IWAR_TYPE_PF | 0x0FFFF000);
- barl += 0x10000000;
- tar += 0x10000000;
- ram_sz -= 0x10000000;
- } else {
- /* The UM is not clear here.
- * So, round up to even Mb boundary */
-
- ram_sz = ram_sz >> (20 +
- ((ram_sz & 0xFFFFF) ? 1 : 0));
- if (!(ram_sz % 2))
- ram_sz -= 1;
- out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
- PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
- ram_sz = 0;
- }
- i++;
- }
-
- in_win = &pex->bridge.pex_inbound_win[i];
- out_le32(&in_win->barl, CONFIG_SYS_IMMR);
- out_le32(&in_win->barh, 0);
- out_le32(&in_win->tar, CONFIG_SYS_IMMR);
- out_le32(&in_win->ar, PEX_IWAR_EN |
- PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
-
- /* Enable the host virtual INTX interrupts */
- out_le32(&pex->bridge.pex_int_axi_misc_enb,
- in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
-
- /* Hose configure header is memory-mapped */
- hose_cfg_base = (void *)pex;
-
- get_clocks();
- /* Configure the PCIE controller core clock ratio */
- out_le32(hose_cfg_base + PEX_GCLK_RATIO,
- (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
- / 333);
- udelay(1000000);
-
- /* Do Type 1 bridge configuration */
- out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
- out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
- out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
-
- /*
- * Write to Command register
- */
- reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
- reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
- PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
- out_le16(hose_cfg_base + PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
- out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
- out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
-
- printf("PCIE%d: ", bus);
-
- reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
- if (reg16 >= PCI_LTSSM_L0)
- printf("link\n");
- else
- printf("No link\n");
-
- mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
-}
-
-/*
- * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
- * must have been set to cover all of the requested regions.
- */
-void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot)
-{
- int i;
-
- /*
- * Release PCI RST Output signal.
- * Power on to RST high must be at least 100 ms as per PCI spec.
- * On warm boots only 1 ms is required.
- */
- udelay(warmboot ? 1000 : 100000);
-
- for (i = 0; i < num_buses; i++)
- mpc83xx_pcie_init_bus(i, reg[i]);
-}
+++ /dev/null
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "common.h"
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "asm/immap_83xx.h"
-
-#define NUM_OF_PINS 32
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
-{
- u32 pin_2bit_mask;
- u32 pin_2bit_dir;
- u32 pin_2bit_assign;
- u32 pin_1bit_mask;
- u32 tmp_val;
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio;
-
- /* Caculate pin location and 2bit mask and dir */
- pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
- pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Setup the direction */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
- in_be32(&par_io->ioport[port].dir2) :
- in_be32(&par_io->ioport[port].dir1);
-
- if (pin > (NUM_OF_PINS/2) -1) {
- out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
- }
-
- /* Calculate pin location for 1bit mask */
- pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
-
- /* Setup the open drain */
- tmp_val = in_be32(&par_io->ioport[port].podr);
- if (open_drain) {
- out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
- }
-
- /* Setup the assignment */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
- in_be32(&par_io->ioport[port].ppar2):
- in_be32(&par_io->ioport[port].ppar1);
- pin_2bit_assign = (u32)(assign
- << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Clear and set 2 bits mask */
- if (pin > (NUM_OF_PINS/2) - 1) {
- out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
- }
-}
+++ /dev/null
-/*
- * Freescale SerDes initialization routine
- *
- * Copyright (C) 2007 Freescale Semicondutor, Inc.
- * Copyright (C) 2008 MontaVista Software, Inc.
- *
- * Author: Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-
-/* SerDes registers */
-#define FSL_SRDSCR0_OFFS 0x0
-#define FSL_SRDSCR0_DPP_1V2 0x00008800
-#define FSL_SRDSCR1_OFFS 0x4
-#define FSL_SRDSCR1_PLLBW 0x00000040
-#define FSL_SRDSCR2_OFFS 0x8
-#define FSL_SRDSCR2_VDD_1V2 0x00800000
-#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
-#define FSL_SRDSCR2_SEIC_SATA 0x00001414
-#define FSL_SRDSCR2_SEIC_PEX 0x00001010
-#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
-#define FSL_SRDSCR3_OFFS 0xc
-#define FSL_SRDSCR3_KFR_SATA 0x10100000
-#define FSL_SRDSCR3_KPH_SATA 0x04040000
-#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
-#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
-#define FSL_SRDSCR4_OFFS 0x10
-#define FSL_SRDSCR4_PROT_SATA 0x00000808
-#define FSL_SRDSCR4_PROT_PEX 0x00000101
-#define FSL_SRDSCR4_PROT_SGMII 0x00000505
-#define FSL_SRDSCR4_PLANE_X2 0x01000000
-#define FSL_SRDSRSTCTL_OFFS 0x20
-#define FSL_SRDSRSTCTL_RST 0x80000000
-#define FSL_SRDSRSTCTL_SATA_RESET 0xf
-
-void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
-{
- void *regs = (void *)CONFIG_SYS_IMMR + offset;
- u32 tmp;
-
- /* 1.0V corevdd */
- if (vdd) {
- /* DPPE/DPPA = 0 */
- tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_DPP_1V2;
- out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
-
- /* VDD = 0 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_VDD_1V2;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
- }
-
- /* protocol specific configuration */
- switch (proto) {
- case FSL_SERDES_PROTO_SATA:
- /* Set and clear reset bits */
- tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
- tmp |= FSL_SRDSRSTCTL_SATA_RESET;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
- udelay(1000);
- tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_SATA;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
- FSL_SRDSCR3_SDFM_SATA_PEX |
- FSL_SRDSCR3_SDTXL_SATA;
- out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- case FSL_SERDES_PROTO_PEX:
- case FSL_SERDES_PROTO_PEX_X2:
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp |= FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_PEX;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
- out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
- if (proto == FSL_SERDES_PROTO_PEX_X2)
- tmp |= FSL_SRDSCR4_PLANE_X2;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- case FSL_SERDES_PROTO_SGMII:
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_SGMII;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- out_be32(regs + FSL_SRDSCR3_OFFS, 0);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- default:
- return;
- }
-
- /* Do a software reset */
- tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
- tmp |= FSL_SRDSRSTCTL_RST;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-}
+++ /dev/null
-/*
- * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include <spd.h>
-#include <asm/mmu.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_add_ram_info(int use_default)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- char buf[32];
-
- printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
- >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
-
- if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
- puts(", 32-bit");
- else
- puts(", 64-bit");
-
- if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on");
- else
- puts(", ECC off");
-
- printf(", %s MHz)", strmhz(buf, gd->mem_clk));
-
-#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
- puts("\nSDRAM: ");
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
-#endif
-}
-
-#ifdef CONFIG_SPD_EEPROM
-#ifndef CONFIG_SYS_READ_SPD
-#define CONFIG_SYS_READ_SPD i2c_read
-#endif
-
-/*
- * Convert picoseconds into clock cycles (rounding up if needed).
- */
-int
-picos_to_clk(int picos)
-{
- unsigned int mem_bus_clk;
- int clks;
-
- mem_bus_clk = gd->mem_clk >> 1;
- clks = picos / (1000000000 / (mem_bus_clk / 1000));
- if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
- clks++;
-
- return clks;
-}
-
-unsigned int banksize(unsigned char row_dens)
-{
- return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
-}
-
-int read_spd(uint addr)
-{
- return ((int) addr);
-}
-
-#undef SPD_DEBUG
-#ifdef SPD_DEBUG
-static void spd_debug(spd_eeprom_t *spd)
-{
- printf ("\nDIMM type: %-18.18s\n", spd->mpart);
- printf ("SPD size: %d\n", spd->info_size);
- printf ("EEPROM size: %d\n", 1 << spd->chip_size);
- printf ("Memory type: %d\n", spd->mem_type);
- printf ("Row addr: %d\n", spd->nrow_addr);
- printf ("Column addr: %d\n", spd->ncol_addr);
- printf ("# of rows: %d\n", spd->nrows);
- printf ("Row density: %d\n", spd->row_dens);
- printf ("# of banks: %d\n", spd->nbanks);
- printf ("Data width: %d\n",
- 256 * spd->dataw_msb + spd->dataw_lsb);
- printf ("Chip width: %d\n", spd->primw);
- printf ("Refresh rate: %02X\n", spd->refresh);
- printf ("CAS latencies: %02X\n", spd->cas_lat);
- printf ("Write latencies: %02X\n", spd->write_lat);
- printf ("tRP: %d\n", spd->trp);
- printf ("tRCD: %d\n", spd->trcd);
- printf ("\n");
-}
-#endif /* SPD_DEBUG */
-
-long int spd_sdram()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
- spd_eeprom_t spd;
- unsigned int n_ranks;
- unsigned int odt_rd_cfg, odt_wr_cfg;
- unsigned char twr_clk, twtr_clk;
- unsigned int sdram_type;
- unsigned int memsize;
- unsigned int law_size;
- unsigned char caslat, caslat_ctrl;
- unsigned int trfc, trfc_clk, trfc_low, trfc_high;
- unsigned int trcd_clk, trtp_clk;
- unsigned char cke_min_clk;
- unsigned char add_lat, wr_lat;
- unsigned char wr_data_delay;
- unsigned char four_act;
- unsigned char cpo;
- unsigned char burstlen;
- unsigned char odt_cfg, mode_odt_enable;
- unsigned int max_bus_clk;
- unsigned int max_data_rate, effective_data_rate;
- unsigned int ddrc_clk;
- unsigned int refresh_clk;
- unsigned int sdram_cfg;
- unsigned int ddrc_ecc_enable;
- unsigned int pvr = get_pvr();
-
- /*
- * First disable the memory controller (could be enabled
- * by the debugger)
- */
- clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
- sync();
- isync();
-
- /* Read SPD parameters with I2C */
- CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-#ifdef SPD_DEBUG
- spd_debug(&spd);
-#endif
- /* Check the memory type */
- if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
- debug("DDR: Module mem type is %02X\n", spd.mem_type);
- return 0;
- }
-
- /* Check the number of physical bank */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- n_ranks = spd.nrows;
- } else {
- n_ranks = (spd.nrows & 0x7) + 1;
- }
-
- if (n_ranks > 2) {
- printf("DDR: The number of physical bank is %02X\n", n_ranks);
- return 0;
- }
-
- /* Check if the number of row of the module is in the range of DDRC */
- if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
- printf("DDR: Row number is out of range of DDRC, row=%02X\n",
- spd.nrow_addr);
- return 0;
- }
-
- /* Check if the number of col of the module is in the range of DDRC */
- if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
- printf("DDR: Col number is out of range of DDRC, col=%02X\n",
- spd.ncol_addr);
- return 0;
- }
-
-#ifdef CONFIG_SYS_DDRCDR_VALUE
- /*
- * Adjust DDR II IO voltage biasing. It just makes it work.
- */
- if(spd.mem_type == SPD_MEMTYPE_DDR2) {
- immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
- }
- udelay(50000);
-#endif
-
- /*
- * ODT configuration recommendation from DDR Controller Chapter.
- */
- odt_rd_cfg = 0; /* Never assert ODT */
- odt_wr_cfg = 0; /* Never assert ODT */
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- odt_wr_cfg = 1; /* Assert ODT on writes to CSn */
- }
-
- /* Setup DDR chip select register */
-#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
- ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs_config[0] = ( 1 << 31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
- debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
- if (n_ranks == 2) {
- ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs_config[1] = ( 1<<31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
- debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
- }
-
-#else
- ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs_config[2] = ( 1 << 31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
- debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
- if (n_ranks == 2) {
- ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs_config[3] = ( 1<<31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
- debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
- }
-#endif
-
- /*
- * Figure out memory size in Megabytes.
- */
- memsize = n_ranks * banksize(spd.row_dens) / 0x100000;
-
- /*
- * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
- */
- law_size = 19 + __ilog2(memsize);
-
- /*
- * Set up LAWBAR for all of DDR.
- */
- ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
- ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
- debug("DDR:bar=0x%08x\n", ecm->bar);
- debug("DDR:ar=0x%08x\n", ecm->ar);
-
- /*
- * Find the largest CAS by locating the highest 1 bit
- * in the spd.cas_lat field. Translate it to a DDR
- * controller field value:
- *
- * CAS Lat DDR I DDR II Ctrl
- * Clocks SPD Bit SPD Bit Value
- * ------- ------- ------- -----
- * 1.0 0 0001
- * 1.5 1 0010
- * 2.0 2 2 0011
- * 2.5 3 0100
- * 3.0 4 3 0101
- * 3.5 5 0110
- * 4.0 6 4 0111
- * 4.5 1000
- * 5.0 5 1001
- */
- caslat = __ilog2(spd.cas_lat);
- if ((spd.mem_type == SPD_MEMTYPE_DDR)
- && (caslat > 6)) {
- printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
- return 0;
- } else if (spd.mem_type == SPD_MEMTYPE_DDR2
- && (caslat < 2 || caslat > 5)) {
- printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
- spd.cas_lat);
- return 0;
- }
- debug("DDR: caslat SPD bit is %d\n", caslat);
-
- max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
- + (spd.clk_cycle & 0x0f));
- max_data_rate = max_bus_clk * 2;
-
- debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
-
- ddrc_clk = gd->mem_clk / 1000000;
- effective_data_rate = 0;
-
- if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
- if (spd.cas_lat & 0x08)
- caslat = 3;
- else
- caslat = 4;
- if (ddrc_clk <= 460 && ddrc_clk > 350)
- effective_data_rate = 400;
- else if (ddrc_clk <=350 && ddrc_clk > 280)
- effective_data_rate = 333;
- else if (ddrc_clk <= 280 && ddrc_clk > 230)
- effective_data_rate = 266;
- else
- effective_data_rate = 200;
- } else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
- if (ddrc_clk <= 460 && ddrc_clk > 350) {
- /* DDR controller clk at 350~460 */
- effective_data_rate = 400; /* 5ns */
- caslat = caslat;
- } else if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- effective_data_rate = 333; /* 6ns */
- if (spd.clk_cycle2 == 0x60)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- if (spd.clk_cycle3 == 0x75)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0x75)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle3 == 0xa0)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- else
- caslat = caslat;
- }
- } else if (max_data_rate >= 323) { /* it is DDR 333 */
- if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- effective_data_rate = 333; /* 6ns */
- caslat = caslat;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- if (spd.clk_cycle2 == 0x75)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle3 == 0xa0)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- else
- caslat = caslat;
- }
- } else if (max_data_rate >= 256) { /* it is DDR 266 */
- if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- printf("DDR: DDR controller freq is more than "
- "max data rate of the module\n");
- return 0;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- }
- } else if (max_data_rate >= 190) { /* it is DDR 200 */
- if (ddrc_clk <= 350 && ddrc_clk > 230) {
- /* DDR controller clk at 230~350 */
- printf("DDR: DDR controller freq is more than "
- "max data rate of the module\n");
- return 0;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- caslat = caslat;
- }
- }
-
- debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
- debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
-
- /*
- * Errata DDR6 work around: input enable 2 cycles earlier.
- * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
- */
- if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
- if (caslat == 2)
- ddr->debug_reg = 0x201c0000; /* CL=2 */
- else if (caslat == 3)
- ddr->debug_reg = 0x202c0000; /* CL=2.5 */
- else if (caslat == 4)
- ddr->debug_reg = 0x202c0000; /* CL=3.0 */
-
- __asm__ __volatile__ ("sync");
-
- debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
- }
-
- /*
- * Convert caslat clocks to DDR controller value.
- * Force caslat_ctrl to be DDR Controller field-sized.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- caslat_ctrl = (caslat + 1) & 0x07;
- } else {
- caslat_ctrl = (2 * caslat - 1) & 0x0f;
- }
-
- debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
- debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
- caslat, caslat_ctrl);
-
- /*
- * Timing Config 0.
- * Avoid writing for DDR I.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- unsigned char taxpd_clk = 8; /* By the book. */
- unsigned char tmrd_clk = 2; /* By the book. */
- unsigned char act_pd_exit = 2; /* Empirical? */
- unsigned char pre_pd_exit = 6; /* Empirical? */
-
- ddr->timing_cfg_0 = (0
- | ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */
- | ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */
- | ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */
- | ((tmrd_clk & 0xf) << 0) /* MRS_CYC */
- );
- debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
- }
-
- /*
- * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
- * use conservative value.
- * For DDR II, they are bytes 36 and 37, in quarter nanos.
- */
-
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- twr_clk = 3; /* Clocks */
- twtr_clk = 1; /* Clocks */
- } else {
- twr_clk = picos_to_clk(spd.twr * 250);
- twtr_clk = picos_to_clk(spd.twtr * 250);
- if (twtr_clk < 2)
- twtr_clk = 2;
- }
-
- /*
- * Calculate Trfc, in picos.
- * DDR I: Byte 42 straight up in ns.
- * DDR II: Byte 40 and 42 swizzled some, in ns.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- trfc = spd.trfc * 1000; /* up to ps */
- } else {
- unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0,
- 0
- };
-
- trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
- + byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
- }
- trfc_clk = picos_to_clk(trfc);
-
- /*
- * Trcd, Byte 29, from quarter nanos to ps and clocks.
- */
- trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
-
- /*
- * Convert trfc_clk to DDR controller fields. DDR I should
- * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
- * 83xx controller has an extended REFREC field of three bits.
- * The controller automatically adds 8 clocks to this value,
- * so preadjust it down 8 first before splitting it up.
- */
- trfc_low = (trfc_clk - 8) & 0xf;
- trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
-
- ddr->timing_cfg_1 =
- (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | /* PRETOACT */
- ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
- (trcd_clk << 20 ) | /* ACTTORW */
- (caslat_ctrl << 16 ) | /* CASLAT */
- (trfc_low << 12 ) | /* REFEC */
- ((twr_clk & 0x07) << 8) | /* WRRREC */
- ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | /* ACTTOACT */
- ((twtr_clk & 0x07) << 0) /* WRTORD */
- );
-
- /*
- * Additive Latency
- * For DDR I, 0.
- * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- */
- add_lat = 0;
- if (spd.mem_type == SPD_MEMTYPE_DDR2
- && (odt_wr_cfg || odt_rd_cfg)
- && (caslat < 4)) {
- add_lat = 4 - caslat;
- if ((add_lat + caslat) < 4) {
- add_lat = 0;
- }
- }
-
- /*
- * Write Data Delay
- * Historically 0x2 == 4/8 clock delay.
- * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
- */
- wr_data_delay = 2;
-
- /*
- * Write Latency
- * Read to Precharge
- * Minimum CKE Pulse Width.
- * Four Activate Window
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- /*
- * This is a lie. It should really be 1, but if it is
- * set to 1, bits overlap into the old controller's
- * otherwise unused ACSM field. If we leave it 0, then
- * the HW will magically treat it as 1 for DDR 1. Oh Yea.
- */
- wr_lat = 0;
-
- trtp_clk = 2; /* By the book. */
- cke_min_clk = 1; /* By the book. */
- four_act = 1; /* By the book. */
-
- } else {
- wr_lat = caslat - 1;
-
- /* Convert SPD value from quarter nanos to picos. */
- trtp_clk = picos_to_clk(spd.trtp * 250);
- if (trtp_clk < 2)
- trtp_clk = 2;
- trtp_clk += add_lat;
-
- cke_min_clk = 3; /* By the book. */
- four_act = picos_to_clk(37500); /* By the book. 1k pages? */
- }
-
- /*
- * Empirically set ~MCAS-to-preamble override for DDR 2.
- * Your milage will vary.
- */
- cpo = 0;
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- if (effective_data_rate == 266) {
- cpo = 0x4; /* READ_LAT + 1/2 */
- } else if (effective_data_rate == 333) {
- cpo = 0x6; /* READ_LAT + 1 */
- } else if (effective_data_rate == 400) {
- cpo = 0x7; /* READ_LAT + 5/4 */
- } else {
- /* Automatic calibration */
- cpo = 0x1f;
- }
- }
-
- ddr->timing_cfg_2 = (0
- | ((add_lat & 0x7) << 28) /* ADD_LAT */
- | ((cpo & 0x1f) << 23) /* CPO */
- | ((wr_lat & 0x7) << 19) /* WR_LAT */
- | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
- | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
- | ((cke_min_clk & 0x7) << 6) /* CKE_PLS */
- | ((four_act & 0x1f) << 0) /* FOUR_ACT */
- );
-
- debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
- debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
-
- /* Check DIMM data bus width */
- if (spd.dataw_lsb < 64) {
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
- else
- burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
- debug("\n DDR DIMM: data bus width is 32 bit");
- } else {
- burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
- debug("\n DDR DIMM: data bus width is 64 bit");
- }
-
- /* Is this an ECC DDR chip? */
- if (spd.config == 0x02)
- debug(" with ECC\n");
- else
- debug(" without ECC\n");
-
- /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
- Burst type is sequential
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- switch (caslat) {
- case 1:
- ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
- break;
- case 2:
- ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
- break;
- case 3:
- ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
- break;
- case 4:
- ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
- break;
- default:
- printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
- return 0;
- }
- } else {
- mode_odt_enable = 0x0; /* Default disabled */
- if (odt_wr_cfg || odt_rd_cfg) {
- /*
- * Bits 6 and 2 in Extended MRS(1)
- * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
- * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
- */
- mode_odt_enable = 0x40; /* 150 Ohm */
- }
-
- ddr->sdram_mode =
- (0
- | (1 << (16 + 10)) /* DQS Differential disable */
- | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
- | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
- | ((twr_clk - 1) << 9) /* Write Recovery Autopre */
- | (caslat << 4) /* caslat */
- | (burstlen << 0) /* Burst length */
- );
- }
- debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
-
- /*
- * Clear EMRS2 and EMRS3.
- */
- ddr->sdram_mode2 = 0;
- debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
-
- switch (spd.refresh) {
- case 0x00:
- case 0x80:
- refresh_clk = picos_to_clk(15625000);
- break;
- case 0x01:
- case 0x81:
- refresh_clk = picos_to_clk(3900000);
- break;
- case 0x02:
- case 0x82:
- refresh_clk = picos_to_clk(7800000);
- break;
- case 0x03:
- case 0x83:
- refresh_clk = picos_to_clk(31300000);
- break;
- case 0x04:
- case 0x84:
- refresh_clk = picos_to_clk(62500000);
- break;
- case 0x05:
- case 0x85:
- refresh_clk = picos_to_clk(125000000);
- break;
- default:
- refresh_clk = 0x512;
- break;
- }
-
- /*
- * Set BSTOPRE to 0x100 for page mode
- * If auto-charge is used, set BSTOPRE = 0
- */
- ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
- debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
-
- /*
- * SDRAM Cfg 2
- */
- odt_cfg = 0;
-#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
- if (odt_rd_cfg | odt_wr_cfg) {
- odt_cfg = 0x2; /* ODT to IOs during reads */
- }
-#endif
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- ddr->sdram_cfg2 = (0
- | (0 << 26) /* True DQS */
- | (odt_cfg << 21) /* ODT only read */
- | (1 << 12) /* 1 refresh at a time */
- );
-
- debug("DDR: sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg2);
- }
-
-#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */
- ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-#endif
- debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
-
- asm("sync;isync");
-
- udelay(600);
-
- /*
- * Figure out the settings for the sdram_cfg register. Build up
- * the value in 'sdram_cfg' before writing since the write into
- * the register will actually enable the memory controller, and all
- * settings must be done before enabling.
- *
- * sdram_cfg[0] = 1 (ddr sdram logic enable)
- * sdram_cfg[1] = 1 (self-refresh-enable)
- * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
- * 010 DDR 1 SDRAM
- * 011 DDR 2 SDRAM
- * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
- * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
- else
- sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
-
- sdram_cfg = (0
- | SDRAM_CFG_MEM_EN /* DDR enable */
- | SDRAM_CFG_SREN /* Self refresh */
- | sdram_type /* SDRAM type */
- );
-
- /* sdram_cfg[3] = RD_EN - registered DIMM enable */
- if (spd.mod_attr & 0x02)
- sdram_cfg |= SDRAM_CFG_RD_EN;
-
- /* The DIMM is 32bit width */
- if (spd.dataw_lsb < 64) {
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
- if (spd.mem_type == SPD_MEMTYPE_DDR2)
- sdram_cfg |= SDRAM_CFG_32_BE;
- }
-
- ddrc_ecc_enable = 0;
-
-#if defined(CONFIG_DDR_ECC)
- /* Enable ECC with sdram_cfg[2] */
- if (spd.config == 0x02) {
- sdram_cfg |= 0x20000000;
- ddrc_ecc_enable = 1;
- /* disable error detection */
- ddr->err_disable = ~ECC_ERROR_ENABLE;
- /* set single bit error threshold to maximum value,
- * reset counter to zero */
- ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
- (0 << ECC_ERROR_MAN_SBEC_SHIFT);
- }
-
- debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
- debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
-
-#if defined(CONFIG_DDR_2T_TIMING)
- /*
- * Enable 2T timing by setting sdram_cfg[16].
- */
- sdram_cfg |= SDRAM_CFG_2T_EN;
-#endif
- /* Enable controller, and GO! */
- ddr->sdram_cfg = sdram_cfg;
- asm("sync;isync");
- udelay(500);
-
- debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
- return memsize; /*in MBytes*/
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Use timebase counter, get_timer() is not availabe
- * at this point of initialization yet.
- */
-static __inline__ unsigned long get_tbms (void)
-{
- unsigned long tbl;
- unsigned long tbu1, tbu2;
- unsigned long ms;
- unsigned long long tmp;
-
- ulong tbclk = get_tbclk();
-
- /* get the timebase ticks */
- do {
- asm volatile ("mftbu %0":"=r" (tbu1):);
- asm volatile ("mftb %0":"=r" (tbl):);
- asm volatile ("mftbu %0":"=r" (tbu2):);
- } while (tbu1 != tbu2);
-
- /* convert ticks to ms */
- tmp = (unsigned long long)(tbu1);
- tmp = (tmp << 32);
- tmp += (unsigned long long)(tbl);
- ms = tmp/(tbclk/1000);
-
- return ms;
-}
-
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-void ddr_enable_ecc(unsigned int dram_size)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr= &immap->ddr;
- unsigned long t_start, t_end;
- register u64 *p;
- register uint size;
- unsigned int pattern[2];
-
- icache_enable();
- t_start = get_tbms();
- pattern[0] = 0xdeadbeef;
- pattern[1] = 0xdeadbeef;
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
- dma_meminit(pattern[0], dram_size);
-#else
- debug("ddr init: CPU FP write method\n");
- size = dram_size;
- for (p = 0; p < (u64*)(size); p++) {
- ppcDWstore((u32*)p, pattern);
- }
- __asm__ __volatile__ ("sync");
-#endif
-
- t_end = get_tbms();
- icache_disable();
-
- debug("\nREADY!!\n");
- debug("ddr init duration: %ld ms\n", t_end - t_start);
-
- /* Clear All ECC Errors */
- if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
- ddr->err_detect |= ECC_ERROR_DETECT_MME;
- if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
- ddr->err_detect |= ECC_ERROR_DETECT_MBE;
- if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
- ddr->err_detect |= ECC_ERROR_DETECT_SBE;
- if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
- ddr->err_detect |= ECC_ERROR_DETECT_MSE;
-
- /* Disable ECC-Interrupts */
- ddr->err_int_en &= ECC_ERR_INT_DISABLE;
-
- /* Enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
-
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-}
-#endif /* CONFIG_DDR_ECC */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ----------------------------------------------------------------- */
-
-typedef enum {
- _unk,
- _off,
- _byp,
- _x8,
- _x4,
- _x2,
- _x1,
- _1x,
- _1_5x,
- _2x,
- _2_5x,
- _3x
-} mult_t;
-
-typedef struct {
- mult_t core_csb_ratio;
- mult_t vco_divider;
-} corecnf_t;
-
-corecnf_t corecnf_tab[] = {
- {_byp, _byp}, /* 0x00 */
- {_byp, _byp}, /* 0x01 */
- {_byp, _byp}, /* 0x02 */
- {_byp, _byp}, /* 0x03 */
- {_byp, _byp}, /* 0x04 */
- {_byp, _byp}, /* 0x05 */
- {_byp, _byp}, /* 0x06 */
- {_byp, _byp}, /* 0x07 */
- {_1x, _x2}, /* 0x08 */
- {_1x, _x4}, /* 0x09 */
- {_1x, _x8}, /* 0x0A */
- {_1x, _x8}, /* 0x0B */
- {_1_5x, _x2}, /* 0x0C */
- {_1_5x, _x4}, /* 0x0D */
- {_1_5x, _x8}, /* 0x0E */
- {_1_5x, _x8}, /* 0x0F */
- {_2x, _x2}, /* 0x10 */
- {_2x, _x4}, /* 0x11 */
- {_2x, _x8}, /* 0x12 */
- {_2x, _x8}, /* 0x13 */
- {_2_5x, _x2}, /* 0x14 */
- {_2_5x, _x4}, /* 0x15 */
- {_2_5x, _x8}, /* 0x16 */
- {_2_5x, _x8}, /* 0x17 */
- {_3x, _x2}, /* 0x18 */
- {_3x, _x4}, /* 0x19 */
- {_3x, _x8}, /* 0x1A */
- {_3x, _x8}, /* 0x1B */
-};
-
-/* ----------------------------------------------------------------- */
-
-/*
- *
- */
-int get_clocks(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 pci_sync_in;
- u8 spmf;
- u8 clkin_div;
- u32 sccr;
- u32 corecnf_tab_index;
- u8 corepll;
- u32 lcrr;
-
- u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- u32 tsec1_clk;
- u32 tsec2_clk;
- u32 usbdr_clk;
-#endif
-#ifdef CONFIG_MPC834x
- u32 usbmph_clk;
-#endif
- u32 core_clk;
- u32 i2c1_clk;
-#if !defined(CONFIG_MPC832x)
- u32 i2c2_clk;
-#endif
-#if defined(CONFIG_MPC8315)
- u32 tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- u32 sdhc_clk;
-#endif
- u32 enc_clk;
- u32 lbiu_clk;
- u32 lclk_clk;
- u32 mem_clk;
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- u32 qepmf;
- u32 qepdf;
- u32 qe_clk;
- u32 brg_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
- u32 pciexp1_clk;
- u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- u32 sata_clk;
-#endif
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
- return -1;
-
- clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
- if (im->reset.rcwh & HRCWH_PCI_HOST) {
-#if defined(CONFIG_83XX_CLKIN)
- pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
-#else
- pci_sync_in = 0xDEADBEEF;
-#endif
- } else {
-#if defined(CONFIG_83XX_PCICLK)
- pci_sync_in = CONFIG_83XX_PCICLK;
-#else
- pci_sync_in = 0xDEADBEEF;
-#endif
- }
-
- spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
- csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
-
- sccr = im->clk.sccr;
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
- case 0:
- tsec1_clk = 0;
- break;
- case 1:
- tsec1_clk = csb_clk;
- break;
- case 2:
- tsec1_clk = csb_clk / 2;
- break;
- case 3:
- tsec1_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TSEC1CM value */
- return -2;
- }
-
- switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
- case 0:
- usbdr_clk = 0;
- break;
- case 1:
- usbdr_clk = csb_clk;
- break;
- case 2:
- usbdr_clk = csb_clk / 2;
- break;
- case 3:
- usbdr_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_USBDRCM value */
- return -3;
- }
-#endif
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
- case 0:
- tsec2_clk = 0;
- break;
- case 1:
- tsec2_clk = csb_clk;
- break;
- case 2:
- tsec2_clk = csb_clk / 2;
- break;
- case 3:
- tsec2_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TSEC2CM value */
- return -4;
- }
-#elif defined(CONFIG_MPC8313)
- tsec2_clk = tsec1_clk;
-
- if (!(sccr & SCCR_TSEC1ON))
- tsec1_clk = 0;
- if (!(sccr & SCCR_TSEC2ON))
- tsec2_clk = 0;
-#endif
-
-#if defined(CONFIG_MPC834x)
- switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
- case 0:
- usbmph_clk = 0;
- break;
- case 1:
- usbmph_clk = csb_clk;
- break;
- case 2:
- usbmph_clk = csb_clk / 2;
- break;
- case 3:
- usbmph_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_USBMPHCM value */
- return -5;
- }
-
- if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
- /* if USB MPH clock is not disabled and
- * USB DR clock is not disabled then
- * USB MPH & USB DR must have the same rate
- */
- return -6;
- }
-#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
- case 0:
- enc_clk = 0;
- break;
- case 1:
- enc_clk = csb_clk;
- break;
- case 2:
- enc_clk = csb_clk / 2;
- break;
- case 3:
- enc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_ENCCM value */
- return -7;
- }
-
-#if defined(CONFIG_MPC837x)
- switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
- case 0:
- sdhc_clk = 0;
- break;
- case 1:
- sdhc_clk = csb_clk;
- break;
- case 2:
- sdhc_clk = csb_clk / 2;
- break;
- case 3:
- sdhc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_SDHCCM value */
- return -8;
- }
-#endif
-#if defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
- case 0:
- tdm_clk = 0;
- break;
- case 1:
- tdm_clk = csb_clk;
- break;
- case 2:
- tdm_clk = csb_clk / 2;
- break;
- case 3:
- tdm_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TDMCM value */
- return -8;
- }
-#endif
-
-#if defined(CONFIG_MPC834x)
- i2c1_clk = tsec2_clk;
-#elif defined(CONFIG_MPC8360)
- i2c1_clk = csb_clk;
-#elif defined(CONFIG_MPC832x)
- i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC831x)
- i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC837x)
- i2c1_clk = sdhc_clk;
-#endif
-#if !defined(CONFIG_MPC832x)
- i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
- switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
- case 0:
- pciexp1_clk = 0;
- break;
- case 1:
- pciexp1_clk = csb_clk;
- break;
- case 2:
- pciexp1_clk = csb_clk / 2;
- break;
- case 3:
- pciexp1_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_PCIEXP1CM value */
- return -9;
- }
-
- switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
- case 0:
- pciexp2_clk = 0;
- break;
- case 1:
- pciexp2_clk = csb_clk;
- break;
- case 2:
- pciexp2_clk = csb_clk / 2;
- break;
- case 3:
- pciexp2_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_PCIEXP2CM value */
- return -10;
- }
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
- case 0:
- sata_clk = 0;
- break;
- case 1:
- sata_clk = csb_clk;
- break;
- case 2:
- sata_clk = csb_clk / 2;
- break;
- case 3:
- sata_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_SATACM value */
- return -11;
- }
-#endif
-
- lbiu_clk = csb_clk *
- (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
- lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
- switch (lcrr) {
- case 2:
- case 4:
- case 8:
- lclk_clk = lbiu_clk / lcrr;
- break;
- default:
- /* unknown lcrr */
- return -12;
- }
-
- mem_clk = csb_clk *
- (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
- corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
-#if defined(CONFIG_MPC8360)
- mem_sec_clk = csb_clk * (1 +
- ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-#endif
-
- corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
- if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
- /* corecnf_tab_index is too high, possibly worng value */
- return -11;
- }
- switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
- case _byp:
- case _x1:
- case _1x:
- core_clk = csb_clk;
- break;
- case _1_5x:
- core_clk = (3 * csb_clk) / 2;
- break;
- case _2x:
- core_clk = 2 * csb_clk;
- break;
- case _2_5x:
- core_clk = (5 * csb_clk) / 2;
- break;
- case _3x:
- core_clk = 3 * csb_clk;
- break;
- default:
- /* unkown core to csb ratio */
- return -13;
- }
-
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
- qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
- qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
- brg_clk = qe_clk / 2;
-#endif
-
- gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- gd->tsec1_clk = tsec1_clk;
- gd->tsec2_clk = tsec2_clk;
- gd->usbdr_clk = usbdr_clk;
-#endif
-#if defined(CONFIG_MPC834x)
- gd->usbmph_clk = usbmph_clk;
-#endif
-#if defined(CONFIG_MPC8315)
- gd->tdm_clk = tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- gd->sdhc_clk = sdhc_clk;
-#endif
- gd->core_clk = core_clk;
- gd->i2c1_clk = i2c1_clk;
-#if !defined(CONFIG_MPC832x)
- gd->i2c2_clk = i2c2_clk;
-#endif
- gd->enc_clk = enc_clk;
- gd->lbiu_clk = lbiu_clk;
- gd->lclk_clk = lclk_clk;
- gd->mem_clk = mem_clk;
-#if defined(CONFIG_MPC8360)
- gd->mem_sec_clk = mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- gd->qe_clk = qe_clk;
- gd->brg_clk = brg_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- gd->pciexp1_clk = pciexp1_clk;
- gd->pciexp2_clk = pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- gd->sata_clk = sata_clk;
-#endif
- gd->pci_clk = pci_sync_in;
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->csb_clk;
- return 0;
-
-}
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq(ulong dummy)
-{
- return gd->csb_clk;
-}
-
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char buf[32];
-
- printf("Clock configuration:\n");
- printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
- printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
-#endif
- printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
- printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
- printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
-#if defined(CONFIG_MPC8360)
- printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
-#endif
- printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
- printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
-#if !defined(CONFIG_MPC832x)
- printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
-#endif
-#if defined(CONFIG_MPC8315)
- printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
-#endif
-#if defined(CONFIG_MPC837x)
- printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
-#endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
- printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
-#endif
-#if defined(CONFIG_MPC834x)
- printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
-#endif
-#if defined(CONFIG_MPC837x)
- printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
- printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
-#endif
- return 0;
-}
-
-U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "print clock configuration",
- " clocks"
-);
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
- */
-
-#include <config.h>
-#include <mpc83xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC83XX"
-#endif
-
-/* We don't want the MMU yet.
- */
-#undef MSR_KERNEL
-
-/*
- * Floating Point enable, Machine Check and Recoverable Interr.
- */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_SYS_FLASHBOOT
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(__bss_start)
- GOT_ENTRY(_end)
-
-#ifndef CONFIG_NAND_SPL
- GOT_ENTRY(_FIXUP_TABLE_)
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-#endif
- END_GOT
-
-/*
- * The Hard Reset Configuration Word (HRCW) table is in the first 64
- * (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
- * times so the processor can fetch it out of flash whether the flash
- * is 8, 16, 32, or 64 bits wide (hardware trickery).
- */
- .text
-#define _HRCW_TABLE_ENTRY(w) \
- .fill 8,1,(((w)>>24)&0xff); \
- .fill 8,1,(((w)>>16)&0xff); \
- .fill 8,1,(((w)>> 8)&0xff); \
- .fill 8,1,(((w) )&0xff)
-
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
-
-/*
- * Magic number and version string - put it after the HRCW since it
- * cannot be first in flash like it is in many other processors.
- */
- .long 0x27051956 /* U-Boot Magic Number */
-
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii " ", CONFIG_IDENT_STRING, "\0"
-
- .align 2
-
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
- .globl ppcDWstore
-ppcDWstore:
- lfd 1, 0(r4)
- stfd 1, 0(r3)
- blr
-
- .globl ppcDWload
-ppcDWload:
- lfd 1, 0(r3)
- stfd 1, 0(r4)
- blr
-
-#ifndef CONFIG_DEFAULT_IMMR
-#error CONFIG_DEFAULT_IMMR must be defined
-#endif /* CONFIG_SYS_DEFAULT_IMMR */
-#ifndef CONFIG_SYS_IMMR
-#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
-#endif /* CONFIG_SYS_IMMR */
-
-/*
- * After configuration, a system reset exception is executed using the
- * vector at offset 0x100 relative to the base set by MSR[IP]. If
- * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
- * base address is 0xfff00000. In the case of a Power On Reset or Hard
- * Reset, the value of MSR[IP] is determined by the CIP field in the
- * HRCW.
- *
- * Other bits in the HRCW set up the Base Address and Port Size in BR0.
- * This determines the location of the boot ROM (flash or EPROM) in the
- * processor's address space at boot time. As long as the HRCW is set up
- * so that we eventually end up executing the code below when the
- * processor executes the reset exception, the actual values used should
- * not matter.
- *
- * Once we have got here, the address mask in OR0 is cleared so that the
- * bottom 32K of the boot ROM is effectively repeated all throughout the
- * processor's address space, after which we can jump to the absolute
- * address at which the boot ROM was linked at compile time, and proceed
- * to initialise the memory controller without worrying if the rug will
- * be pulled out from under us, so to speak (it will be fine as long as
- * we configure BR0 with the same boot ROM link address).
- */
- . = EXC_OFF_SYS_RESET
-
- .globl _start
-_start: /* time t 0 */
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-
-boot_cold: /* time t 3 */
- lis r4, CONFIG_DEFAULT_IMMR@h
- nop
-boot_warm: /* time t 5 */
- mfmsr r5 /* save msr contents */
-
- /* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
- bl 1f
-1: mflr r7
-
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
-
- lwz r6, IMMRBAR(r4)
- isync
-
- stw r3, IMMRBAR(r4)
- lwz r6, 0(r7) /* Arbitrary external load */
- isync
-
- lwz r6, IMMRBAR(r3)
- isync
-
- /* Initialise the E300 processor core */
- /*------------------------------------------*/
-
-#ifdef CONFIG_NAND_SPL
- /* The FCM begins execution after only the first page
- * is loaded. Wait for the rest before branching
- * to another flash page.
- */
-1: lwz r6, 0x50b0(r3)
- andi. r6, r6, 1
- beq 1b
-#endif
-
- bl init_e300_core
-
-#ifdef CONFIG_SYS_FLASHBOOT
-
- /* Inflate flash location so it appears everywhere, calculate */
- /* the absolute address in final location of the FLASH, jump */
- /* there and deflate the flash size back to minimal size */
- /*------------------------------------------------------------*/
- bl map_flash_by_law1
- lis r4, (CONFIG_SYS_MONITOR_BASE)@h
- ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
- addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r5
- blr
-in_flash:
-#if 1 /* Remapping flash with LAW0. */
- bl remap_flash_by_law0
-#endif
-#endif /* CONFIG_SYS_FLASHBOOT */
-
- /* setup the bats */
- bl setup_bats
- sync
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * This means:
- * 1) for the EVB, original gt regs need to be mapped
- * 2) need to have an IBAT for the 0xf region,
- * we are running there!
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- * The init-mem BAT can be reused after reloc. The old
- * gt-regs BAT can be reused after board_init_f calls
- * board_early_init_f (EVB only).
- */
- /* enable address translation */
- bl enable_addr_trans
- sync
-
- /* enable the data cache */
- bl dcache_enable
- sync
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable & stack humble */
- /*------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- lis r3, CONFIG_SYS_IMMR@h
- /* run low-level CPU init code (in Flash)*/
- bl cpu_init_f
-
- /* r3: BOOTFLAG */
- mr r3, r21
- /* run 1st part of board init code (in Flash)*/
- bl board_init_f
-
-#ifndef CONFIG_NAND_SPL
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-#ifndef FIXME
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-#endif
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-#endif /* !CONFIG_NAND_SPL */
-
-/*
- * This code initialises the E300 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
- .globl init_e300_core
-init_e300_core: /* time t 10 */
- /* Initialize machine status; enable machine check interrupt */
- /*-----------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
-
- lis r3, CONFIG_SYS_IMMR@h
-#if defined(CONFIG_WATCHDOG)
- /* Initialise the Wathcdog values and reset it (if req) */
- /*------------------------------------------------------*/
- lis r4, CONFIG_SYS_WATCHDOG_VALUE
- ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
- stw r4, SWCRR(r3)
-
- /* and reset it */
-
- li r4, 0x556C
- sth r4, SWSRR@l(r3)
- li r4, -0x55C7
- sth r4, SWSRR@l(r3)
-#else
- /* Disable Wathcdog */
- /*-------------------*/
- lwz r4, SWCRR(r3)
- /* Check to see if its enabled for disabling
- once disabled by SW you can't re-enable */
- andi. r4, r4, 0x4
- beq 1f
- xor r4, r4, r4
- stw r4, SWCRR(r3)
-1:
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_MASK_AER_AO)
- /* Write the Arbiter Event Enable to mask Address Only traps. */
- /* This prevents the dcbz instruction from being trapped when */
- /* HID0_ABE Address Broadcast Enable is set and the MEMORY */
- /* COHERENCY bit is set in the WIMG bits, which is often */
- /* needed for PCI operation. */
- lwz r4, 0x0808(r3)
- rlwinm r0, r4, 0, ~AER_AO
- stw r0, 0x0808(r3)
-#endif /* CONFIG_MASK_AER_AO */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /* - force invalidation of data and instruction caches */
- /*------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- SYNC
- mtspr HID2, r3
-
- /* Done! */
- /*------------------------------*/
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- addis r3, r0, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
-
- /* DBAT 0 */
- addis r4, r0, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- addis r3, r0, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
-
- /* IBAT 1 */
- addis r4, r0, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- addis r3, r0, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
-
- /* DBAT 1 */
- addis r4, r0, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- addis r3, r0, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
-
- /* IBAT 2 */
- addis r4, r0, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- addis r3, r0, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
-
- /* DBAT 2 */
- addis r4, r0, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- addis r3, r0, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
-
- /* IBAT 3 */
- addis r4, r0, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- addis r3, r0, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
-
- /* DBAT 3 */
- addis r4, r0, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- addis r3, r0, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CONFIG_SYS_IBAT4L@h
- ori r4, r4, CONFIG_SYS_IBAT4L@l
- addis r3, r0, CONFIG_SYS_IBAT4U@h
- ori r3, r3, CONFIG_SYS_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
-
- /* DBAT 4 */
- addis r4, r0, CONFIG_SYS_DBAT4L@h
- ori r4, r4, CONFIG_SYS_DBAT4L@l
- addis r3, r0, CONFIG_SYS_DBAT4U@h
- ori r3, r3, CONFIG_SYS_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
-
- /* IBAT 5 */
- addis r4, r0, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- addis r3, r0, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
-
- /* DBAT 5 */
- addis r4, r0, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- addis r3, r0, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
-
- /* IBAT 6 */
- addis r4, r0, CONFIG_SYS_IBAT6L@h
- ori r4, r4, CONFIG_SYS_IBAT6L@l
- addis r3, r0, CONFIG_SYS_IBAT6U@h
- ori r3, r3, CONFIG_SYS_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
-
- /* DBAT 6 */
- addis r4, r0, CONFIG_SYS_DBAT6L@h
- ori r4, r4, CONFIG_SYS_DBAT6L@l
- addis r3, r0, CONFIG_SYS_DBAT6U@h
- ori r3, r3, CONFIG_SYS_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
-
- /* IBAT 7 */
- addis r4, r0, CONFIG_SYS_IBAT7L@h
- ori r4, r4, CONFIG_SYS_IBAT7L@l
- addis r3, r0, CONFIG_SYS_IBAT7U@h
- ori r3, r3, CONFIG_SYS_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
-
- /* DBAT 7 */
- addis r4, r0, CONFIG_SYS_DBAT7L@h
- ori r4, r4, CONFIG_SYS_DBAT7L@l
- addis r3, r0, CONFIG_SYS_DBAT7U@h
- ori r3, r3, CONFIG_SYS_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
-#endif
-
- isync
-
- /* invalidate all tlb's
- *
- * From the 603e User Manual: "The 603e provides the ability to
- * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
- * instruction invalidates the TLB entry indexed by the EA, and
- * operates on both the instruction and data TLBs simultaneously
- * invalidating four TLB entries (both sets in each TLB). The
- * index corresponds to bits 15-19 of the EA. To invalidate all
- * entries within both TLBs, 32 tlbie instructions should be
- * issued, incrementing this field by one each time."
- *
- * "Note that the tlbia instruction is not implemented on the
- * 603e."
- *
- * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
- * incrementing by 0x1000 each time. The code below is sort of
- * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
- *
- */
- lis r3, 0
- lis r5, 2
-
-1:
- tlbie r3
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt 1b
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- li r4, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
- andc r3, r3, r4
- isync
- mtspr HID0, r3 /* clears invalidate, enable and lock */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- ori r3, r3, HID0_DCE
- sync
- mtspr HID0, r3 /* enable, no invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r4
- bl flush_dcache /* uses r3 and r5 */
- mfspr r3, HID0
- li r5, HID0_DCE|HID0_DLOCK
- andc r3, r3, r5
- ori r5, r3, HID0_DCFI
- sync
- mtspr HID0, r5 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- mtlr r4
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
- blr
-
- .globl flush_dcache
-flush_dcache:
- lis r3, 0
- lis r5, CONFIG_SYS_CACHELINE_SIZE
-1: cmp 0, 1, r3, r5
- bge 2f
- lwz r5, 0(r3)
- lis r5, CONFIG_SYS_CACHELINE_SIZE
- addi r3, r3, 0x4
- b 1b
-2: blr
-
-/*-------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__bss_start)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
- * + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* copy */
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
-
- addi r0,r5,3
- srwi. r0,r0,2
- mtctr r0
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* and compare */
-20: lwzu r20,4(r8)
- lwzu r21,4(r7)
- xor. r22, r20, r21
- bne 30f
- bdnz 20b
- b 4f
-
- /* compare failed */
-30: li r3, 0
- blr
-
-2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-#endif
-
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
- lwz r4,GOT(_end)
-#endif
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
-
-#endif /* !CONFIG_NAND_SPL */
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, HID0_DLOCK
- sync
- mtspr HID0, r0
- sync
- blr
-
-#ifndef CONFIG_NAND_SPL
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- dcbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-
- /* Unlock the data cache and invalidate it */
- mfspr r3, HID0
- li r5, HID0_DLOCK|HID0_DCFI
- andc r3, r3, r5 /* no invalidate, unlock */
- ori r5, r3, HID0_DCFI /* invalidate, unlock */
- sync
- mtspr HID0, r5 /* invalidate, unlock */
- sync
- mtspr HID0, r3 /* no invalidate, unlock */
- blr
-#endif /* !CONFIG_NAND_SPL */
-#endif /* CONFIG_SYS_INIT_RAM_LOCK */
-
-#ifdef CONFIG_SYS_FLASHBOOT
-map_flash_by_law1:
- /* When booting from ROM (Flash or EPROM), clear the */
- /* Address Mask in OR0 so ROM appears everywhere */
- /*----------------------------------------------------*/
- lis r3, (CONFIG_SYS_IMMR)@h /* r3 <= CONFIG_SYS_IMMR */
- lwz r4, OR0@l(r3)
- li r5, 0x7fff /* r5 <= 0x00007FFFF */
- and r4, r4, r5
- stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
-
- /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
- * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
- * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
- * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
- * 0xFF800. From the hard resetting to here, the processor fetched and
- * executed the instructions one by one. There is not absolutely
- * jumping happened. Laterly, the u-boot code has to do an absolutely
- * jumping to tell the CPU instruction fetching component what the
- * u-boot TEXT base address is. Because the TEXT base resides in the
- * boot ROM memory space, to garantee the code can run smoothly after
- * that jumping, we must map in the entire boot ROM by Local Access
- * Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
- * address for boot ROM, such as 0xFE000000. In this case, the default
- * LBIU Local Access Widow 0 will not cover this memory space. So, we
- * need another window to map in it.
- */
- lis r4, (CONFIG_SYS_FLASH_BASE)@h
- ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
- stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
-
- /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
- lis r4, (0x80000012)@h
- ori r4, r4, (0x80000012)@l
- li r5, CONFIG_SYS_FLASH_SIZE
-1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
- addi r4, r4, 1
- bne 1b
-
- stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
- blr
-
- /* Though all the LBIU Local Access Windows and LBC Banks will be
- * initialized in the C code, we'd better configure boot ROM's
- * window 0 and bank 0 correctly at here.
- */
-remap_flash_by_law0:
- /* Initialize the BR0 with the boot ROM starting address. */
- lwz r4, BR0(r3)
- li r5, 0x7FFF
- and r4, r4, r5
- lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
- ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
- or r5, r5, r4
- stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
-
- lwz r4, OR0(r3)
- lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
- or r4, r4, r5
- stw r4, OR0(r3)
-
- lis r4, (CONFIG_SYS_FLASH_BASE)@h
- ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
- stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
-
- /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
- lis r4, (0x80000012)@h
- ori r4, r4, (0x80000012)@l
- li r5, CONFIG_SYS_FLASH_SIZE
-1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
- addi r4, r4, 1
- bne 1b
- stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
-
-
- xor r4, r4, r4
- stw r4, LBLAWBAR1(r3)
- stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
- blr
-#endif /* CONFIG_SYS_FLASHBOOT */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware
- * exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/mpc8349_pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- putc ('\n');
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-#ifdef CONFIG_PCI
-void dump_pci (void)
-{
-/*
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- printf ("PCI: err status %x err mask %x err ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_esr),
- le32_to_cpu (immap->im_pci.pci_emr),
- le32_to_cpu (immap->im_pci.pci_ecr));
- printf (" error address %x error data %x ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_eacr),
- le32_to_cpu (immap->im_pci.pci_edcr),
- le32_to_cpu (immap->im_pci.pci_eccr));
-*/
-}
-#endif
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
-#ifdef CONFIG_PCI
-#if 0
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-#ifdef DEBUG
- dump_pci();
-#endif
- /* clear the error in the error status register */
- if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
- immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
- return;
- }
-#endif
-#endif /* CONFIG_PCI */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check in kernel mode.\n"
- "Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- puts ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000>>15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-#ifdef CONFIG_PCI
- dump_pci();
-#endif
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/ppc/cpu/mpc83xx/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
-ENTRY(_start)
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao,X.Xiao@motorola.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o resetvec.o
-SOBJS-$(CONFIG_MP) += release.o
-SOBJS = $(SOBJS-y)
-
-COBJS-$(CONFIG_CPM2) += commproc.o
-
-# supports ddr1
-COBJS-$(CONFIG_MPC8540) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8560) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8541) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-COBJS-$(CONFIG_MPC8548) += ddr-gen2.o
-COBJS-$(CONFIG_MPC8568) += ddr-gen2.o
-COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
-COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
-COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
-COBJS-$(CONFIG_P1011) += ddr-gen3.o
-COBJS-$(CONFIG_P1012) += ddr-gen3.o
-COBJS-$(CONFIG_P1013) += ddr-gen3.o
-COBJS-$(CONFIG_P1020) += ddr-gen3.o
-COBJS-$(CONFIG_P1021) += ddr-gen3.o
-COBJS-$(CONFIG_P1022) += ddr-gen3.o
-COBJS-$(CONFIG_P2010) += ddr-gen3.o
-COBJS-$(CONFIG_P2020) += ddr-gen3.o
-COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
-
-COBJS-$(CONFIG_CPM2) += ether_fcc.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-$(CONFIG_MP) += mp.o
-COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-$(CONFIG_QE) += qe_io.o
-COBJS-$(CONFIG_CPM2) += serial_scc.o
-
-COBJS = $(COBJS-y)
-COBJS += cpu.o
-COBJS += cpu_init.o
-COBJS += cpu_init_early.o
-COBJS += interrupts.o
-COBJS += speed.o
-COBJS += tlb.o
-COBJS += traps.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * Adapted for Motorola MPC8560 chips
- * Xianghua Xiao <x.xiao@motorola.com>
- *
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8220 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- * Copyright (c) 2003 Motorola,Inc.
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm/cpm_85xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * because we have stack and init data in dual port ram
- * we must reduce the size
- */
-#undef CPM_DATAONLY_SIZE
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-
-void
-m8560_cpm_reset(void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ulong count;
-
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Reclaim the DP memory for our use.
- */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
-
- /*
- * Reset CPM
- */
- cpm->im_cpm_cp.cpcr = CPM_CR_RST;
- count = 0;
- do { /* Spin until command processed */
- __asm__ __volatile__ ("eieio");
- } while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8560_cpm_dpalloc(uint size, uint align)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint retloc;
- uint align_mask, off;
- uint savebase;
-
- align_mask = align - 1;
- savebase = gd->dp_alloc_base;
-
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
-
- if ((off = size & align_mask) != 0)
- size += align - off;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
- panic("m8560_cpm_dpalloc: ran out of dual port ram!");
- }
-
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
-
- memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
-
- return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8560_cpm_hostalloc(uint size, uint align)
-{
- /* the host might not even have RAM yet - just use dual port RAM */
- return (m8560_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8560_cpm_setbrg(uint brg, uint rate)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8560_cpm_fastbrg(uint brg, uint rate, int div16)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (pinsel == 0)
- *bp |= CPM_BRG_EXTC_CLK3_9;
- else
- *bp |= CPM_BRG_EXTC_CLK5_15;
-}
-
-#ifdef CONFIG_POST
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST */
+++ /dev/null
-#
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao, X.Xiao@motorola.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
-
-# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
-# see "[PATCH,rs6000] make -mno-spe work as expected" on
-# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
-PLATFORM_CPPFLAGS +=$(call cc-option,-mspe=yes)
-PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc85xx/u-boot.lds
+++ /dev/null
-/*
- * Copyright 2004,2007-2009 Freescale Semiconductor, Inc.
- * (C) Copyright 2002, 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <fsl_esdhc.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- sys_info_t sysinfo;
- uint pvr, svr;
- uint fam;
- uint ver;
- uint major, minor;
- struct cpu_type *cpu;
- char buf1[32], buf2[32];
-#ifdef CONFIG_DDR_CLK_FREQ
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
- >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
-#else
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#endif
-#else
-#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync = 0;
-#else
- u32 ddr_ratio = 0;
-#endif
-#endif /* CONFIG_DDR_CLK_FREQ */
- int i;
-
- svr = get_svr();
- major = SVR_MAJ(svr);
-#ifdef CONFIG_MPC8536
- major &= 0x7; /* the msb of this nibble is a mfg code */
-#endif
- minor = SVR_MIN(svr);
-
- if (cpu_numcores() > 1) {
-#ifndef CONFIG_MP
- puts("Unicore software on multiprocessor system!!\n"
- "To enable mutlticore build define CONFIG_MP\n");
-#endif
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- printf("CPU%d: ", pic->whoami);
- } else {
- puts("CPU: ");
- }
-
- cpu = gd->cpu;
-
- puts(cpu->name);
- if (IS_E_PROCESSOR(svr))
- puts("E");
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
-
- pvr = get_pvr();
- fam = PVR_FAM(pvr);
- ver = PVR_VER(pvr);
- major = PVR_MAJ(pvr);
- minor = PVR_MIN(pvr);
-
- printf("Core: ");
- switch (fam) {
- case PVR_FAM(PVR_85xx):
- puts("E500");
- break;
- default:
- puts("Unknown");
- break;
- }
-
- if (PVR_MEM(pvr) == 0x03)
- puts("MC");
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
-
- get_sys_info(&sysinfo);
-
- puts("Clock Configuration:");
- for (i = 0; i < cpu_numcores(); i++) {
- if (!(i & 3))
- printf ("\n ");
- printf("CPU%d:%-4s MHz, ",
- i,strmhz(buf1, sysinfo.freqProcessor[i]));
- }
- printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
-
-#ifdef CONFIG_FSL_CORENET
- if (ddr_sync == 1) {
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- } else {
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- }
-#else
- switch (ddr_ratio) {
- case 0x0:
- printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- case 0x7:
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- default:
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- }
-#endif
-
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
- } else {
- printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
- }
-
-#ifdef CONFIG_CPM2
- printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
-#endif
-
-#ifdef CONFIG_QE
- printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
- printf(" FMAN%d: %s MHz\n", i,
- strmhz(buf1, sysinfo.freqFMan[i]));
- }
-#endif
-
-#ifdef CONFIG_SYS_DPAA_PME
- printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
-#endif
-
- puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
-/* Everything after the first generation of PQ3 parts has RSTCR */
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
- defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
- unsigned long val, msr;
-
- /*
- * Initiate hard reset in debug control register DBCR0
- * Make sure MSR[DE] = 1. This only resets the core.
- */
- msr = mfmsr ();
- msr |= MSR_DE;
- mtmsr (msr);
-
- val = mfspr(DBCR0);
- val |= 0x70000000;
- mtspr(DBCR0,val);
-#else
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */
- udelay(100);
-#endif
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-#ifdef CONFIG_FSL_CORENET
- return (gd->bus_clk + 8) / 16;
-#else
- return (gd->bus_clk + 4UL)/8UL;
-#endif
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_85xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void
-reset_85xx_watchdog(void)
-{
- /*
- * Clear TSR(WIS) bit by writing 1
- */
- unsigned long val;
- val = mfspr(SPRN_TSR);
- val |= TSR_WIS;
- mtspr(SPRN_TSR, val);
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Configures a UPM. The function requires the respective MxMR to be set
- * before calling this function. "size" is the number or entries, not a sizeof.
- */
-void upmconfig (uint upm, uint * table, uint size)
-{
- int i, mdr, mad, old_mad = 0;
- volatile u32 *mxmr;
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- volatile u32 *brp,*orp;
- volatile u8* dummy = NULL;
- int upmmask;
-
- switch (upm) {
- case UPMA:
- mxmr = &lbc->mamr;
- upmmask = BR_MS_UPMA;
- break;
- case UPMB:
- mxmr = &lbc->mbmr;
- upmmask = BR_MS_UPMB;
- break;
- case UPMC:
- mxmr = &lbc->mcmr;
- upmmask = BR_MS_UPMC;
- break;
- default:
- printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
- hang();
- }
-
- /* Find the address for the dummy write transaction */
- for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
- i++, brp += 2, orp += 2) {
-
- /* Look for a valid BR with selected UPM */
- if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
- dummy = (volatile u8*)(in_be32(brp) & BR_BA);
- break;
- }
- }
-
- if (i == 8) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- for (i = 0; i < size; i++) {
- /* 1 */
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
- /* 2 */
- out_be32(&lbc->mdr, table[i]);
- /* 3 */
- mdr = in_be32(&lbc->mdr);
- /* 4 */
- *(volatile u8 *)dummy = 0;
- /* 5 */
- do {
- mad = in_be32(mxmr) & MxMR_MAD_MSK;
- } while (mad <= old_mad && !(!mad && i == (size-1)));
- old_mad = mad;
- }
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
- return fsl_esdhc_mmc_init(bis);
-#else
- return 0;
-#endif
-}
+++ /dev/null
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2003 Motorola Inc.
- * Modified by Xianghua Xiao, X.Xiao@motorola.com
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <asm/processor.h>
-#include <ioports.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include "mp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MPC8536
-extern void fsl_serdes_init(void);
-#endif
-
-#ifdef CONFIG_QE
-extern qe_iop_conf_t qe_iop_conf_tab[];
-extern void qe_config_iopin(u8 port, u8 pin, int dir,
- int open_drain, int assign);
-extern void qe_init(uint qe_base);
-extern void qe_reset(void);
-
-static void config_qe_ioports(void)
-{
- u8 port, pin;
- int dir, open_drain, assign;
- int i;
-
- for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
- port = qe_iop_conf_tab[i].port;
- pin = qe_iop_conf_tab[i].pin;
- dir = qe_iop_conf_tab[i].dir;
- open_drain = qe_iop_conf_tab[i].open_drain;
- assign = qe_iop_conf_tab[i].assign;
- qe_config_iopin(port, pin, dir, open_drain, assign);
- }
-}
-#endif
-
-#ifdef CONFIG_CPM2
-void config_8560_ioports (volatile ccsr_cpm_t * cpm)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (cpm, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-#endif
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map
- * initialize a bunch of registers
- */
-
-#ifdef CONFIG_FSL_CORENET
-static void corenet_tb_init(void)
-{
- volatile ccsr_rcpm_t *rcpm =
- (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
- volatile ccsr_pic_t *pic =
- (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- u32 whoami = in_be32(&pic->whoami);
-
- /* Enable the timebase register for this core */
- out_be32(&rcpm->ctbenrl, (1 << whoami));
-}
-#endif
-
-void cpu_init_f (void)
-{
- volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- extern void m8560_cpm_reset (void);
-#ifdef CONFIG_MPC8548
- ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- uint svr = get_svr();
-
- /*
- * CPU2 errata workaround: A core hang possible while executing
- * a msync instruction and a snoopable transaction from an I/O
- * master tagged to make quick forward progress is present.
- * Fixed in silicon rev 2.1.
- */
- if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
- out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
-#endif
-
- disable_tlb(14);
- disable_tlb(15);
-
-#ifdef CONFIG_CPM2
- config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
-#endif
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* if cs1 is already set via debugger, leave cs0/cs1 alone */
- if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
- memctl->br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
- }
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#if defined(CONFIG_CPM2)
- m8560_cpm_reset();
-#endif
-#ifdef CONFIG_QE
- /* Config QE ioports */
- config_qe_ioports();
-#endif
-#if defined(CONFIG_MPC8536)
- fsl_serdes_init();
-#endif
-#if defined(CONFIG_FSL_DMA)
- dma_init();
-#endif
-#ifdef CONFIG_FSL_CORENET
- corenet_tb_init();
-#endif
- init_used_tlb_cams();
-}
-
-
-/*
- * Initialize L2 as cache.
- *
- * The newer 8548, etc, parts have twice as much cache, but
- * use the same bit-encoding as the older 8555, etc, parts.
- *
- */
-
-int cpu_init_r(void)
-{
- puts ("L2: ");
-
-#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- volatile uint cache_ctl;
- uint svr, ver;
- uint l2srbar;
- u32 l2siz_field;
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
-
- asm("msync;isync");
- cache_ctl = l2cache->l2ctl;
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
- if (cache_ctl & MPC85xx_L2CTL_L2E) {
- /* Clear L2 SRAM memory-mapped base address */
- out_be32(&l2cache->l2srbar0, 0x0);
- out_be32(&l2cache->l2srbar1, 0x0);
-
- /* set MBECCDIS=0, SBECCDIS=0 */
- clrbits_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC |
- MPC85xx_L2ERRDIS_SBECC));
-
- /* set L2E=0, L2SRAM=0 */
- clrbits_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E |
- MPC85xx_L2CTL_L2SRAM_ENTIRE));
- }
-#endif
-
- l2siz_field = (cache_ctl >> 28) & 0x3;
-
- switch (l2siz_field) {
- case 0x0:
- printf(" unknown size (0x%08x)\n", cache_ctl);
- return -1;
- break;
- case 0x1:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
- puts("128 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
- cache_ctl = 0xc4000000;
- } else {
- puts("256 KB ");
- cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
- }
- break;
- case 0x2:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
- puts("256 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
- cache_ctl = 0xc8000000;
- } else {
- puts ("512 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
- }
- break;
- case 0x3:
- puts("1024 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
- break;
- }
-
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
- puts("already enabled");
- l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
- && l2srbar >= CONFIG_SYS_FLASH_BASE) {
- l2srbar = CONFIG_SYS_INIT_L2_ADDR;
- l2cache->l2srbar0 = l2srbar;
- printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
- }
-#endif /* CONFIG_SYS_INIT_L2_ADDR */
- puts("\n");
- } else {
- asm("msync;isync");
- l2cache->l2ctl = cache_ctl; /* invalidate & enable */
- asm("msync;isync");
- puts("enabled\n");
- }
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
- u32 l2cfg0 = mfspr(SPRN_L2CFG0);
-
- /* invalidate the L2 cache */
- mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
- while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
- ;
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- /* set stash id to (coreID) * 2 + 32 + L2 (1) */
- mtspr(SPRN_L2CSR1, (32 + 1));
-#endif
-
- /* enable the cache */
- mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
-
- if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
- while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
- ;
- printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
- }
-#else
- puts("disabled\n");
-#endif
-#ifdef CONFIG_QE
- uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
- qe_init(qe_base);
- qe_reset();
-#endif
-
-#if defined(CONFIG_MP)
- setup_mp();
-#endif
- return 0;
-}
-
-extern void setup_ivors(void);
-
-void arch_preboot_os(void)
-{
- u32 msr;
-
- /*
- * We are changing interrupt offsets and are about to boot the OS so
- * we need to make sure we disable all async interrupts. EE is already
- * disabled by the time we get called.
- */
- msr = mfmsr();
- msr &= ~(MSR_ME|MSR_CE|MSR_DE);
- mtmsr(msr);
-
- setup_ivors();
-}
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
-#ifdef CONFIG_FSL_CORENET
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
- volatile ccsr_local_t *ccm;
-
- /*
- * We can't call set_law() because we haven't moved
- * CCSR yet.
- */
- ccm = (void *)ccsr_virt;
-
- out_be32(&ccm->law[0].lawbarh,
- (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->law[0].lawar,
- LAW_EN | (0x1e << 20) | LAW_SIZE_4K);
-
- in_be32((u32 *)(ccsr_virt + 0));
- in_be32((u32 *)(ccsr_virt + 1));
- isync();
-
- ccm = (void *)CONFIG_SYS_CCSRBAR;
- /* Now use the temporary LAW to move CCSR */
- out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->ccsrar, CCSRAR_C);
- temp = in_be32(&ccm->ccsrar);
- disable_law(0);
-}
-#else
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
-
- temp = in_be32(ccsr_virt);
- out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
- temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
-}
-#endif
-#endif
-
-/* We run cpu_init_early_f in AS = 1 */
-void cpu_init_early_f(void)
-{
- u32 mas0, mas1, mas2, mas3, mas7;
- int i;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /*
- * Clear initial global data
- * we don't use memset so we can share this code with NAND_SPL
- */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
-
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0);
- mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K);
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
-
- write_tlb(mas0, mas1, mas2, mas3, mas7);
-
- /* set up CCSR if we want it moved */
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
- /* mas1 is the same as above */
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
-
- write_tlb(mas0, mas1, mas2, mas3, mas7);
-
- setup_ccsrbar();
-#endif
-
- init_laws();
- invalidate_tlb(0);
- init_tlbs();
-}
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-void cpu_init_f(void)
-{
- ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
- /*
- * LCRR - Clock Ratio Register - set up local bus timing
- * when needed
- */
- out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
-
-#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
- out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
- out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
-#else
-#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
- ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- char *l2srbar;
- int i;
-
- out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
-
- /* set MBECCDIS=1, SBECCDIS=1 */
- out_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
-
- /* set L2E=1 & L2SRAM=001 */
- out_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
-
- /* Initialize L2 SRAM to zero */
- l2srbar = (char *)CONFIG_SYS_INIT_L2_ADDR;
- for (i = 0; i < CONFIG_SYS_L2_SIZE; i++)
- l2srbar[i] = 0;
-#endif
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-
- if (ctrl_num != 0) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#endif
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- asm("sync;isync;msync");
- udelay(500);
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-
-void
-ddr_enable_ecc(unsigned int dram_size)
-{
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
- dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
- /*
- * Enable errors for ECC.
- */
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
- ddr->err_disable = 0x00000000;
- asm("sync;isync;msync");
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-}
-
-#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-
- if (ctrl_num) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr;
- u32 temp_sdram_cfg;
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
- break;
- case 1:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
- break;
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
- out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
- out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
- out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
-
- /* Set, but do not enable the memory */
- temp_sdram_cfg = regs->ddr_sdram_cfg;
- temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
- /*
- * For 8572 DDR1 erratum - DDR controller may enter illegal state
- * when operatiing in 32-bit bus mode with 4-beat bursts,
- * This erratum does not affect DDR3 mode, only for DDR2 mode.
- */
-#ifdef CONFIG_MPC8572
- if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
- && in_be32(&ddr->sdram_cfg) & 0x80000) {
- /* set DEBUG_1[31] */
- u32 temp = in_be32(&ddr->debug_1);
- out_be32(&ddr->debug_1, temp | 1);
- }
-#endif
-
- /*
- * 500 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- * DDR2 need 200 us, and DDR3 need 500 us from spec,
- * we choose the max, that is 500 us for all of case.
- */
- udelay(500);
- asm volatile("sync;isync");
-
- /* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
+++ /dev/null
-/*
- * MPC8560 FCC Fast Ethernet
- * Copyright (c) 2003 Motorola,Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8560 FCC Fast Ethernet
- * Basic ET HW initialization and packet RX/TX routines
- *
- * This code will not perform the IO port configuration. This should be
- * done in the iop_conf_t structure specific for the board.
- *
- * TODO:
- * add a PHY driver to do the negotiation
- * reflect negotiation results in FPSMR
- * look for ways to configure the board specific stuff elsewhere, eg.
- * config_xxx.h or the board directory
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/cpm_85xx.h>
-#include <command.h>
-#include <config.h>
-#include <net.h>
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
- defined(CONFIG_NET_MULTI)
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int proff_enet;
- ulong cpm_cr_enet_sblock;
- ulong cpm_cr_enet_page;
- ulong cmxfcr_mask;
- ulong cmxfcr_value;
-}
- ether_fcc_info[] =
-{
-#ifdef CONFIG_ETHER_ON_FCC1
-{
- 0,
- PROFF_FCC1,
- CPM_CR_FCC1_SBLOCK,
- CPM_CR_FCC1_PAGE,
- CONFIG_SYS_CMXFCR_MASK1,
- CONFIG_SYS_CMXFCR_VALUE1
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC2
-{
- 1,
- PROFF_FCC2,
- CPM_CR_FCC2_SBLOCK,
- CPM_CR_FCC2_PAGE,
- CONFIG_SYS_CMXFCR_MASK2,
- CONFIG_SYS_CMXFCR_VALUE2
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC3
-{
- 2,
- PROFF_FCC3,
- CPM_CR_FCC3_SBLOCK,
- CPM_CR_FCC3_PAGE,
- CONFIG_SYS_CMXFCR_MASK3,
- CONFIG_SYS_CMXFCR_VALUE3
-},
-#endif
-};
-
-/*---------------------------------------------------------------------*/
-
-/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
-#define PKT_MAXDMA_SIZE 1520
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets. */
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-
-/* Maximum input buffer size. Must be a multiple of 32. */
-#define PKT_MAXBLR_SIZE 1536
-
-#define TOUT_LOOP 1000000
-
-#define TX_BUF_CNT 2
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FCC Ethernet Tx and Rx buffer descriptors.
- * Provide for Double Buffering
- * Note: PKTBUFSRX is defined in net.h
- */
-
-typedef volatile struct rtxbd {
- cbd_t rxbd[PKTBUFSRX];
- cbd_t txbd[TX_BUF_CNT];
-} RTXBD;
-
-/* Good news: the FCC supports external BDs! */
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-#undef ET_DEBUG
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i = 0;
- int result = 0;
-
- if (length <= 0) {
- printf("fec: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("fec: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx.txbd[txIdx].cbd_datlen = length;
- rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \
- BD_ENET_TX_TC | BD_ENET_TX_PAD);
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("fec: tx error\n");
- goto out;
- }
- }
-
-#ifdef ET_DEBUG
- printf("cycles: 0x%x txIdx=0x%04x status: 0x%04x\n", i, txIdx,rtx.txbd[txIdx].cbd_sc);
- printf("packets at 0x%08x, length_in_bytes=0x%x\n",(uint)packet,length);
- for(i=0;i<(length/16 + 1);i++) {
- printf("%08x %08x %08x %08x\n",*((uint *)rtx.txbd[txIdx].cbd_bufaddr+i*4),\
- *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 1),*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 2), \
- *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 3));
- }
-#endif
-
- /* return only status bits */
- result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
-out:
- return result;
-}
-
-static int fec_recv(struct eth_device* dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
- length = rtx.rxbd[rxIdx].cbd_datlen;
-
- if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
- printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
- }
- else {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the FCC. */
- rtx.rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-
-static int fec_init(struct eth_device* dev, bd_t *bis)
-{
- struct ether_fcc_info_s * info = dev->priv;
- int i;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
- fcc_enet_t *pram_ptr;
- unsigned long mem_addr;
-
-#if 0
- mii_discover_phy();
-#endif
-
- /* 28.9 - (1-2): ioports have been set up already */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- cpm->im_cpm_mux.cmxuar = 0; /* ATM */
- cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
- info->cmxfcr_value;
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- }
-
- /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- } else if (info->ether_index == 1){
- cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- } else if (info->ether_index == 2){
- cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- }
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fdsr = 0xD555;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.fdsr = 0xD555;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.fdsr = 0xD555;
- }
-
- /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
- rxIdx = 0;
- txIdx = 0;
-
- /* Setup Receiver Buffer Descriptors */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx.rxbd[i].cbd_datlen = 0;
- rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* Setup Ethernet Transmitter Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx.txbd[i].cbd_sc = 0;
- rtx.txbd[i].cbd_datlen = 0;
- rtx.txbd[i].cbd_bufaddr = 0;
- }
- rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 28.9 - (7): initialize parameter ram */
- pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
-
- /* clear whole structure to make sure all reserved fields are zero */
- memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- * CPM_FCC_SPECIAL_BASE: 0xB000 for MPC8540, MPC8560
- * 0x9000 for MPC8541, MPC8555
- */
- mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
- pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
- pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- */
- pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */
- /* localbus SDRAM should be preferred */
- pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
- pram_ptr->fen_genfcc.fcc_rbdstat = 0;
- pram_ptr->fen_genfcc.fcc_rbdlen = 0;
- pram_ptr->fen_genfcc.fcc_rdptr = 0;
- /* localbus SDRAM should be preferred */
- pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
- pram_ptr->fen_genfcc.fcc_tbdstat = 0;
- pram_ptr->fen_genfcc.fcc_tbdlen = 0;
- pram_ptr->fen_genfcc.fcc_tdptr = 0;
-
- /* protocol-specific area */
- pram_ptr->fen_statbuf = 0x0;
- pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
- pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
- pram_ptr->fen_crcec = 0;
- pram_ptr->fen_alec = 0;
- pram_ptr->fen_disfc = 0;
- pram_ptr->fen_retlim = 15; /* Retry limit threshold */
- pram_ptr->fen_retcnt = 0;
- pram_ptr->fen_pper = 0;
- pram_ptr->fen_boffcnt = 0;
- pram_ptr->fen_gaddrh = 0;
- pram_ptr->fen_gaddrl = 0;
- pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So far we have only been given one Ethernet address. We make
- * it unique by setting a few bits in the upper byte of the
- * non-static part of the address.
- */
-#define ea eth_get_dev()->enetaddr
- pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
- pram_ptr->fen_ibdcount = 0;
- pram_ptr->fen_ibdstart = 0;
- pram_ptr->fen_ibdend = 0;
- pram_ptr->fen_txlen = 0;
- pram_ptr->fen_iaddrh = 0; /* disable hash */
- pram_ptr->fen_iaddrl = 0;
- pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register: 64 */
- /* pad pointer. use tiptr since we don't need a specific padding char */
- pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
- pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length:1520 */
- pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length:1520 */
-
-#if defined(ET_DEBUG)
- printf("parm_ptr(0xff788500) = %p\n",pram_ptr);
- printf("pram_ptr->fen_genfcc.fcc_rbase %08x\n",
- pram_ptr->fen_genfcc.fcc_rbase);
- printf("pram_ptr->fen_genfcc.fcc_tbase %08x\n",
- pram_ptr->fen_genfcc.fcc_tbase);
-#endif
-
- /* 28.9 - (8)(9): clear out events in FCCE */
- /* 28.9 - (9): FCCM: mask all events */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fcce = ~0x0;
- cpm->im_cpm_fcc1.fccm = 0;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.fcce = ~0x0;
- cpm->im_cpm_fcc2.fccm = 0;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.fcce = ~0x0;
- cpm->im_cpm_fcc3.fccm = 0;
- }
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
- info->cpm_cr_enet_sblock,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cpcr & CPM_CR_FLG);
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- }
-
- return 1;
-}
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s * info = dev->priv;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- /* write GFMR: disable tx/rx */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- } else if(info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- } else if(info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- }
-}
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- {
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "FCC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- dev->priv = ðer_fcc_info[i];
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
- && defined(CONFIG_BITBANGMII)
- miiphy_register(dev->name,
- bb_miiphy_read, bb_miiphy_write);
-#endif
- }
-
- return 1;
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <linux/ctype.h>
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void ft_qe_setup(void *blob);
-extern void ft_fixup_num_cores(void *blob);
-
-#ifdef CONFIG_MP
-#include "mp.h"
-
-void ft_fixup_cpu(void *blob, u64 memory_limit)
-{
- int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
- u32 id = get_my_id();
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-
- if (reg) {
- if (*reg == id) {
- fdt_setprop_string(blob, off, "status", "okay");
- } else {
- u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
- val = cpu_to_fdt32(val);
- fdt_setprop_string(blob, off, "status",
- "disabled");
- fdt_setprop_string(blob, off, "enable-method",
- "spin-table");
- fdt_setprop(blob, off, "cpu-release-addr",
- &val, sizeof(val));
- }
- } else {
- printf ("cpu NULL\n");
- }
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
-
- /* Reserve the boot page so OSes dont use it */
- if ((u64)bootpg < memory_limit) {
- off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
- if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
- }
-}
-#endif
-
-#define ft_fixup_l3cache(x, y)
-
-#if defined(CONFIG_L2_CACHE)
-/* return size in kilobytes */
-static inline u32 l2cache_size(void)
-{
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
- u32 ver = SVR_SOC_VER(get_svr());
-
- switch (l2siz_field) {
- case 0x0:
- break;
- case 0x1:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
- return 128;
- else
- return 256;
- break;
- case 0x2:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
- return 256;
- else
- return 512;
- break;
- case 0x3:
- return 1024;
- break;
- }
-
- return 0;
-}
-
-static inline void ft_fixup_l2cache(void *blob)
-{
- int len, off;
- u32 *ph;
- struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
- char compat_buf[38];
-
- const u32 line_size = 32;
- const u32 num_ways = 8;
- const u32 size = l2cache_size() * 1024;
- const u32 num_sets = size / (line_size * num_ways);
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- if (off < 0) {
- debug("no cpu node fount\n");
- return;
- }
-
- ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- return ;
- }
-
- off = fdt_node_offset_by_phandle(blob, *ph);
- if (off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- return ;
- }
-
- if (cpu) {
- if (isdigit(cpu->name[0]))
- len = sprintf(compat_buf,
- "fsl,mpc%s-l2-cache-controller", cpu->name);
- else
- len = sprintf(compat_buf,
- "fsl,%c%s-l2-cache-controller",
- tolower(cpu->name[0]), cpu->name + 1);
-
- sprintf(&compat_buf[len + 1], "cache");
- }
- fdt_setprop(blob, off, "cache-unified", NULL, 0);
- fdt_setprop_cell(blob, off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, off, "cache-size", size);
- fdt_setprop_cell(blob, off, "cache-sets", num_sets);
- fdt_setprop_cell(blob, off, "cache-level", 2);
- fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
-
- /* we dont bother w/L3 since no platform of this type has one */
-}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
-static inline void ft_fixup_l2cache(void *blob)
-{
- int off, l2_off, l3_off = -1;
- u32 *ph;
- u32 l2cfg0 = mfspr(SPRN_L2CFG0);
- u32 size, line_size, num_ways, num_sets;
-
- size = (l2cfg0 & 0x3fff) * 64 * 1024;
- num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
- line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
- num_sets = size / (line_size * num_ways);
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
-
- while (off != -FDT_ERR_NOTFOUND) {
- ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- goto next;
- }
-
- l2_off = fdt_node_offset_by_phandle(blob, *ph);
- if (l2_off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- goto next;
- }
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
- fdt_setprop_cell(blob, l2_off, "cache-stash-id",
- (*reg * 2) + 32 + 1);
- }
-#endif
-
- fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
- fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, l2_off, "cache-size", size);
- fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
- fdt_setprop_cell(blob, l2_off, "cache-level", 2);
- fdt_setprop(blob, l2_off, "compatible", "cache", 6);
-
- if (l3_off < 0) {
- ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- goto next;
- }
- l3_off = *ph;
- }
-next:
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
- if (l3_off > 0) {
- l3_off = fdt_node_offset_by_phandle(blob, l3_off);
- if (l3_off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- return ;
- }
- ft_fixup_l3cache(blob, l3_off);
- }
-}
-#else
-#define ft_fixup_l2cache(x)
-#endif
-
-static inline void ft_fixup_cache(void *blob)
-{
- int off;
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
-
- while (off != -FDT_ERR_NOTFOUND) {
- u32 l1cfg0 = mfspr(SPRN_L1CFG0);
- u32 l1cfg1 = mfspr(SPRN_L1CFG1);
- u32 isize, iline_size, inum_sets, inum_ways;
- u32 dsize, dline_size, dnum_sets, dnum_ways;
-
- /* d-side config */
- dsize = (l1cfg0 & 0x7ff) * 1024;
- dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
- dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
- dnum_sets = dsize / (dline_size * dnum_ways);
-
- fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
- fdt_setprop_cell(blob, off, "d-cache-size", dsize);
- fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
- fdt_setprop_cell(blob, off, "cache-stash-id",
- (*reg * 2) + 32 + 0);
- }
-#endif
-
- /* i-side config */
- isize = (l1cfg1 & 0x7ff) * 1024;
- inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
- iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
- inum_sets = isize / (iline_size * inum_ways);
-
- fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
- fdt_setprop_cell(blob, off, "i-cache-size", isize);
- fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
-
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
-
- ft_fixup_l2cache(blob);
-}
-
-
-void fdt_add_enet_stashing(void *fdt)
-{
- do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
-
- do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
-
- do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
-}
-
-#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
-static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
-{
- const char *path = fdt_get_alias(blob, alias);
-
- int off = fdt_path_offset(blob, path);
-
- if (off >= 0) {
- off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
- if (off > 0)
- printf("WARNING enable to set clock-frequency "
- "for %s: %s\n", alias, fdt_strerror(off));
- }
-}
-
-static void ft_fixup_dpaa_clks(void *blob)
-{
- sys_info_t sysinfo;
-
- get_sys_info(&sysinfo);
- ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
- ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
-#endif
-
-#ifdef CONFIG_SYS_DPAA_PME
- ft_fixup_clks(blob, "pme", sysinfo.freqPME);
-#endif
-}
-#else
-#define ft_fixup_dpaa_clks(x)
-#endif
-
-#ifdef CONFIG_QE
-static void ft_fixup_qe_snum(void *blob)
-{
- unsigned int svr;
-
- svr = mfspr(SPRN_SVR);
- if (SVR_SOC_VER(svr) == SVR_8569_E) {
- if(IS_SVR_REV(svr, 1, 0))
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "fsl,qe-num-snums", 46, 1);
- else
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "fsl,qe-num-snums", 76, 1);
- }
-}
-#endif
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- int off;
- int val;
- sys_info_t sysinfo;
-
- /* delete crypto node if not on an E-processor */
- if (!IS_E_PROCESSOR(get_svr()))
- fdt_fixup_crypto_node(blob, 0);
-
- fdt_fixup_ethernet(blob);
-
- fdt_add_enet_stashing(blob);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- get_sys_info(&sysinfo);
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
- fdt_setprop(blob, off, "clock-frequency", &val, 4);
- off = fdt_node_offset_by_prop_value(blob, off, "device_type",
- "cpu", 4);
- }
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
- do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
- "bus-frequency", gd->lbc_clk, 1);
- do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
-#ifdef CONFIG_QE
- ft_qe_setup(blob);
- ft_fixup_qe_snum(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
-#ifdef CONFIG_CPM2
- do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
- "current-speed", bd->bi_baudrate, 1);
-
- do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
- "clock-frequency", bd->bi_brgfreq, 1);
-#endif
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#ifdef CONFIG_MP
- ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
-#endif
- ft_fixup_num_cores(blob);
-
- ft_fixup_cache(blob);
-
-#if defined(CONFIG_FSL_ESDHC)
- fdt_fixup_esdhc(blob, bd);
-#endif
-
- ft_fixup_dpaa_clks(blob);
-}
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * Kumar Gala <kumar.gala@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This file is intended to be included by other asm code since
- * we will want to execute this on both the primary core when
- * it does a bootm and the secondary core's that get released
- * out of the spin table */
-
-#define SET_IVOR(vector_number, vector_offset) \
- li r3,vector_offset@l; \
- mtspr SPRN_IVOR##vector_number,r3;
-
-#define SET_GIVOR(vector_number, vector_offset) \
- li r3,vector_offset@l; \
- mtspr SPRN_GIVOR##vector_number,r3;
-
- SET_IVOR(0, 0x020) /* Critical Input */
- SET_IVOR(1, 0x000) /* Machine Check */
- SET_IVOR(2, 0x060) /* Data Storage */
- SET_IVOR(3, 0x080) /* Instruction Storage */
- SET_IVOR(4, 0x0a0) /* External Input */
- SET_IVOR(5, 0x0c0) /* Alignment */
- SET_IVOR(6, 0x0e0) /* Program */
- SET_IVOR(7, 0x100) /* FP Unavailable */
- SET_IVOR(8, 0x120) /* System Call */
- SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
- SET_IVOR(10, 0x160) /* Decrementer */
- SET_IVOR(11, 0x180) /* Fixed Interval Timer */
- SET_IVOR(12, 0x1a0) /* Watchdog Timer */
- SET_IVOR(13, 0x1c0) /* Data TLB Error */
- SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
- SET_IVOR(15, 0x040) /* Debug */
-
-/* e500v1 & e500v2 only */
-#ifndef CONFIG_E500MC
- SET_IVOR(32, 0x200) /* SPE Unavailable */
- SET_IVOR(33, 0x220) /* Embedded FP Data */
- SET_IVOR(34, 0x240) /* Embedded FP Round */
-#endif
-
- SET_IVOR(35, 0x260) /* Performance monitor */
-
-/* e500mc only */
-#ifdef CONFIG_E500MC
- SET_IVOR(36, 0x280) /* Processor doorbell */
- SET_IVOR(37, 0x2a0) /* Processor doorbell critical */
- SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */
- SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */
- SET_IVOR(40, 0x300) /* Hypervisor system call */
- SET_IVOR(41, 0x320) /* Hypervisor Priviledge */
-
- SET_GIVOR(2, 0x060) /* Guest Data Storage */
- SET_GIVOR(3, 0x080) /* Guest Instruction Storage */
- SET_GIVOR(4, 0x0a0) /* Guest External Input */
- SET_GIVOR(8, 0x120) /* Guest System Call */
- SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */
- SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-int interrupt_init_cpu(unsigned int *decrementer_count)
-{
- ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC85xx_PIC_ADDR;
-
- out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
- while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
- ;
- out_be32(&pic->gcr, MPC85xx_PICGCR_M);
- in_be32(&pic->gcr);
-
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- /* PIE is same as DIE, dec interrupt enable */
- mtspr(SPRN_TCR, TCR_PIE);
-
-#ifdef CONFIG_INTERRUPTS
- pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
- debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
-
- pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
- debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
-
- pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
- debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
-
-#ifdef CONFIG_PCI1
- pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
- debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
-#endif
-#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
- pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
- debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
-#endif
-#ifdef CONFIG_PCIE1
- pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
- debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
-#endif
-#ifdef CONFIG_PCIE3
- pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
- debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
-#endif
-
- pic->ctpr=0; /* 40080 clear current task priority register */
-#endif
-
- return (0);
-}
-
-/* Install and free a interrupt handler. Not implemented yet. */
-
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
- return;
-}
-
-void
-irq_free_handler(int vec)
-{
- return;
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* PIS is same as DIS, dec interrupt status */
- mtspr(SPRN_TSR, TSR_PIS);
-}
-
-#if defined(CONFIG_CMD_IRQ)
-/* irqinfo - print information about PCI devices,not implemented. */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <ioports.h>
-#include <lmb.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include "mp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32 get_my_id()
-{
- return mfspr(SPRN_PIR);
-}
-
-int cpu_reset(int nr)
-{
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- out_be32(&pic->pir, 1 << nr);
- /* the dummy read works around an errata on early 85xx MP PICs */
- (void)in_be32(&pic->pir);
- out_be32(&pic->pir, 0x0);
-
- return 0;
-}
-
-int cpu_status(int nr)
-{
- u32 *table, id = get_my_id();
-
- if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
- printf("table base @ 0x%p\n", table);
- } else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
- printf("Running on cpu %d\n", id);
- printf("\n");
- printf("table @ 0x%p\n", table);
- printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
- printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_FSL_CORENET
-int cpu_disable(int nr)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- setbits_be32(&gur->coredisrl, 1 << nr);
-
- return 0;
-}
-#else
-int cpu_disable(int nr)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- switch (nr) {
- case 0:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
- break;
- case 1:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
- break;
- default:
- printf("Invalid cpu number for disable %d\n", nr);
- return 1;
- }
-
- return 0;
-}
-#endif
-
-static u8 boot_entry_map[4] = {
- 0,
- BOOT_ENTRY_PIR,
- BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
-};
-
-int cpu_release(int nr, int argc, char *argv[])
-{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
- u64 boot_addr;
-
- if (nr == get_my_id()) {
- printf("Invalid to release the boot core.\n\n");
- return 1;
- }
-
- if (argc != 4) {
- printf("Invalid number of arguments to release.\n\n");
- return 1;
- }
-
- boot_addr = simple_strtoull(argv[0], NULL, 16);
-
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
- if (argv[i][0] != '-') {
- u8 entry = boot_entry_map[i];
- val = simple_strtoul(argv[i], NULL, 16);
- table[entry] = val;
- }
- }
-
- table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
-
- /* ensure all table updates complete before final address write */
- eieio();
-
- table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
-
- return 0;
-}
-
-u32 determine_mp_bootpg(void)
-{
- /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
-
- return (gd->ram_size - 4096);
-}
-
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-ulong get_spin_virt_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
-{
- u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
- volatile ccsr_gur_t *gur;
- volatile ccsr_local_t *ccm;
- volatile ccsr_rcpm_t *rcpm;
- volatile ccsr_pic_t *pic;
- int timeout = 10;
- u32 nr_cpus;
- struct law_entry e;
-
- gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
- rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
- pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
-
- nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
-
- whoami = in_be32(&pic->whoami);
- cpu_up_mask = 1 << whoami;
- out_be32(&ccm->bstrl, bootpg);
-
- e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
-
- /* readback to sync write */
- in_be32(&ccm->bstrar);
-
- /* disable time base at the platform */
- out_be32(&rcpm->ctbenrl, cpu_up_mask);
-
- /* release the hounds */
- up = ((1 << nr_cpus) - 1);
- out_be32(&gur->brrl, up);
-
- /* wait for everyone */
- while (timeout) {
- int i;
- for (i = 0; i < nr_cpus; i++) {
- if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
- cpu_up_mask |= (1 << i);
- };
-
- if ((cpu_up_mask & up) == up)
- break;
-
- udelay(100);
- timeout--;
- }
-
- if (timeout == 0)
- printf("CPU up timeout. CPU up mask is %x should be %x\n",
- cpu_up_mask, up);
-
- /* enable time base at the platform */
- out_be32(&rcpm->ctbenrl, 0);
- mtspr(SPRN_TBWU, 0);
- mtspr(SPRN_TBWL, 0);
- out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
-
-#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
- /*
- * Disabling Boot Page Translation allows the memory region 0xfffff000
- * to 0xffffffff to be used normally. Leaving Boot Page Translation
- * enabled remaps 0xfffff000 to SDRAM which makes that memory region
- * unusable for normal operation but it does allow OSes to easily
- * reset a processor core to put it back into U-Boot's spinloop.
- */
- clrbits_be32(&ecm->bptr, 0x80000000);
-#endif
-}
-#else
-static void plat_mp_up(unsigned long bootpg)
-{
- u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
- volatile u32 bpcr;
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- u32 devdisr;
- int timeout = 10;
-
- whoami = in_be32(&pic->whoami);
- out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
-
- /* disable time base at the platform */
- devdisr = in_be32(&gur->devdisr);
- if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB0;
- else
- devdisr |= MPC85xx_DEVDISR_TB1;
- out_be32(&gur->devdisr, devdisr);
-
- /* release the hounds */
- up = ((1 << cpu_numcores()) - 1);
- bpcr = in_be32(&ecm->eebpcr);
- bpcr |= (up << 24);
- out_be32(&ecm->eebpcr, bpcr);
- asm("sync; isync; msync");
-
- cpu_up_mask = 1 << whoami;
- /* wait for everyone */
- while (timeout) {
- int i;
- for (i = 0; i < cpu_numcores(); i++) {
- if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
- cpu_up_mask |= (1 << i);
- };
-
- if ((cpu_up_mask & up) == up)
- break;
-
- udelay(100);
- timeout--;
- }
-
- if (timeout == 0)
- printf("CPU up timeout. CPU up mask is %x should be %x\n",
- cpu_up_mask, up);
-
- /* enable time base at the platform */
- if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB1;
- else
- devdisr |= MPC85xx_DEVDISR_TB0;
- out_be32(&gur->devdisr, devdisr);
- mtspr(SPRN_TBWU, 0);
- mtspr(SPRN_TBWL, 0);
-
- devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
- out_be32(&gur->devdisr, devdisr);
-
-#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
- /*
- * Disabling Boot Page Translation allows the memory region 0xfffff000
- * to 0xffffffff to be used normally. Leaving Boot Page Translation
- * enabled remaps 0xfffff000 to SDRAM which makes that memory region
- * unusable for normal operation but it does allow OSes to easily
- * reset a processor core to put it back into U-Boot's spinloop.
- */
- clrbits_be32(&ecm->bptr, 0x80000000);
-#endif
-}
-#endif
-
-void cpu_mp_lmb_reserve(struct lmb *lmb)
-{
- u32 bootpg = determine_mp_bootpg();
-
- lmb_reserve(lmb, bootpg, 4096);
-}
-
-void setup_mp(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
-
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
-
- /* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
-
- /* we found a match */
- if (i != -1) {
- /* map reset page to bootpg so we can copy code there */
- disable_tlb(i);
-
- set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
- 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
-
- memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
-
- plat_mp_up(bootpg);
- } else {
- puts("WARNING: No reset page TLB. "
- "Skipping secondary core setup\n");
- }
-}
+++ /dev/null
-#ifndef __MPC85XX_MP_H_
-#define __MPC85XX_MP_H_
-
-#include <asm/mp.h>
-
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
-u32 get_my_id(void);
-
-#define BOOT_ENTRY_ADDR_UPPER 0
-#define BOOT_ENTRY_ADDR_LOWER 1
-#define BOOT_ENTRY_R3_UPPER 2
-#define BOOT_ENTRY_R3_LOWER 3
-#define BOOT_ENTRY_RESV 4
-#define BOOT_ENTRY_PIR 5
-#define BOOT_ENTRY_R6_UPPER 6
-#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
-#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2008 Freescale Semicondutor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/immap_85xx.h>
-
-/* PORDEVSR register */
-#define GUTS_PORDEVSR_OFFS 0xc
-#define GUTS_PORDEVSR_SERDES2_IO_SEL 0x38000000
-#define GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT 27
-
-/* SerDes CR0 register */
-#define FSL_SRDSCR0_OFFS 0x0
-#define FSL_SRDSCR0_TXEQA_MASK 0x00007000
-#define FSL_SRDSCR0_TXEQA_SGMII 0x00004000
-#define FSL_SRDSCR0_TXEQA_SATA 0x00001000
-#define FSL_SRDSCR0_TXEQE_MASK 0x00000700
-#define FSL_SRDSCR0_TXEQE_SGMII 0x00000400
-#define FSL_SRDSCR0_TXEQE_SATA 0x00000100
-
-/* SerDes CR1 register */
-#define FSL_SRDSCR1_OFFS 0x4
-#define FSL_SRDSCR1_LANEA_MASK 0x80200000
-#define FSL_SRDSCR1_LANEA_OFF 0x80200000
-#define FSL_SRDSCR1_LANEE_MASK 0x08020000
-#define FSL_SRDSCR1_LANEE_OFF 0x08020000
-
-/* SerDes CR2 register */
-#define FSL_SRDSCR2_OFFS 0x8
-#define FSL_SRDSCR2_EICA_MASK 0x00001f00
-#define FSL_SRDSCR2_EICA_SGMII 0x00000400
-#define FSL_SRDSCR2_EICA_SATA 0x00001400
-#define FSL_SRDSCR2_EICE_MASK 0x0000001f
-#define FSL_SRDSCR2_EICE_SGMII 0x00000004
-#define FSL_SRDSCR2_EICE_SATA 0x00000014
-
-/* SerDes CR3 register */
-#define FSL_SRDSCR3_OFFS 0xc
-#define FSL_SRDSCR3_LANEA_MASK 0x3f000700
-#define FSL_SRDSCR3_LANEA_SGMII 0x00000000
-#define FSL_SRDSCR3_LANEA_SATA 0x15000500
-#define FSL_SRDSCR3_LANEE_MASK 0x003f0007
-#define FSL_SRDSCR3_LANEE_SGMII 0x00000000
-#define FSL_SRDSCR3_LANEE_SATA 0x00150005
-
-void fsl_serdes_init(void)
-{
- void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
- u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
- u32 srds2_io_sel;
- u32 tmp;
-
- /* parse the SRDS2_IO_SEL of PORDEVSR */
- srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
- >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
-
- switch (srds2_io_sel) {
- case 1: /* Lane A - SATA1, Lane E - SATA2 */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SATA;
- tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
- tmp |= FSL_SRDSCR0_TXEQE_SATA;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SATA;
- tmp &= ~FSL_SRDSCR2_EICE_MASK;
- tmp |= FSL_SRDSCR2_EICE_SATA;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SATA;
- tmp &= ~FSL_SRDSCR3_LANEE_MASK;
- tmp |= FSL_SRDSCR3_LANEE_SATA;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 3: /* Lane A - SATA1, Lane E - disabled */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SATA;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SATA;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SATA;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 4: /* Lane A - eTSEC1 SGMII, Lane E - eTSEC3 SGMII */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SGMII;
- tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
- tmp |= FSL_SRDSCR0_TXEQE_SGMII;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SGMII;
- tmp &= ~FSL_SRDSCR2_EICE_MASK;
- tmp |= FSL_SRDSCR2_EICE_SGMII;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SGMII;
- tmp &= ~FSL_SRDSCR3_LANEE_MASK;
- tmp |= FSL_SRDSCR3_LANEE_SGMII;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 6: /* Lane A - eTSEC1 SGMII, Lane E - disabled */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SGMII;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SGMII;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SGMII;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 7: /* Lane A - disabled, Lane E - disabled */
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp |= FSL_SRDSCR1_LANEA_OFF;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- break;
- default:
- break;
- }
-}
+++ /dev/null
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC85xx PCI Bridge
- */
-#include <common.h>
-#include <asm/cpm_85xx.h>
-#include <pci.h>
-
-#if !defined(CONFIG_FSL_PCI_INIT)
-
-#ifndef CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
-#endif
-
-static struct pci_controller *pci_hose;
-
-void
-pci_mpc85xx_init(struct pci_controller *board_hose)
-{
- u16 reg16;
- u32 dev;
-
- volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
-#ifdef CONFIG_MPC85XX_PCI2
- volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
-#endif
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct pci_controller * hose;
-
- pci_hose = board_hose;
-
- hose = &pci_hose[0];
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR+0x8000),
- (CONFIG_SYS_IMMR+0x8004));
-
- /*
- * Hose scan.
- */
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
- /* PCI-X init */
- if (CONFIG_SYS_CLK_FREQ < 66000000)
- printf("PCI-X will only work at 66 MHz\n");
-
- reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
- | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
- }
-
- pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
- pcix->potear1 = 0x00000000;
- pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
- pcix->powbear1 = 0x00000000;
- pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
-
- pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
- pcix->potear2 = 0x00000000;
- pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
- pcix->powbear2 = 0x00000000;
- pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
-
- pcix->pitar1 = 0x00000000;
- pcix->piwbar1 = 0x00000000;
- pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
-
- pcix->powar3 = 0;
- pcix->powar4 = 0;
- pcix->piwar2 = 0;
- pcix->piwar3 = 0;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
- pci_register_hose(hose);
-
-#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
- /*
- * This is a SW workaround for an apparent HW problem
- * in the PCI controller on the MPC85555/41 CDS boards.
- * The first config cycle must be to a valid, known
- * device on the PCI bus in order to trick the PCI
- * controller state machine into a known valid state.
- * Without this, the first config cycle has the chance
- * of hanging the controller permanently, just leaving
- * it in a semi-working state, or leaving it working.
- *
- * Pick on the Tundra, Device 17, to get it right.
- */
- {
- u8 header_type;
-
- pci_hose_read_config_byte(hose,
- PCI_BDF(0,BRIDGE_ID,0),
- PCI_HEADER_TYPE,
- &header_type);
- }
-#endif
-
- hose->last_busno = pci_hose_scan(hose);
-
-#ifdef CONFIG_MPC85XX_PCI2
- hose = &pci_hose[1];
-
- hose->first_busno = pci_hose[0].last_busno + 1;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR+0x9000),
- (CONFIG_SYS_IMMR+0x9004));
-
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-
- pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
- pcix2->potear1 = 0x00000000;
- pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
- pcix2->powbear1 = 0x00000000;
- pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
-
- pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
- pcix2->potear2 = 0x00000000;
- pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
- pcix2->powbear2 = 0x00000000;
- pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
-
- pcix2->pitar1 = 0x00000000;
- pcix2->piwbar1 = 0x00000000;
- pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
-
- pcix2->powar3 = 0;
- pcix2->powar4 = 0;
- pcix2->piwar2 = 0;
- pcix2->piwar3 = 0;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
- /*
- * Hose scan.
- */
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-#endif /* !CONFIG_FSL_PCI_INIT */
+++ /dev/null
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "common.h"
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "asm/immap_85xx.h"
-
-#if defined(CONFIG_QE)
-#define NUM_OF_PINS 32
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
-{
- u32 pin_2bit_mask;
- u32 pin_2bit_dir;
- u32 pin_2bit_assign;
- u32 pin_1bit_mask;
- u32 tmp_val;
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile par_io_t *par_io = (volatile par_io_t *)
- &(gur->qe_par_io);
-
- /* Caculate pin location and 2bit mask and dir */
- pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
- pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Setup the direction */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
- in_be32(&par_io[port].cpdir2) :
- in_be32(&par_io[port].cpdir1);
-
- if (pin > (NUM_OF_PINS/2) -1) {
- out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val);
- } else {
- out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val);
- }
-
- /* Calculate pin location for 1bit mask */
- pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
-
- /* Setup the open drain */
- tmp_val = in_be32(&par_io[port].cpodr);
- if (open_drain)
- out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val);
- else
- out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val);
-
- /* Setup the assignment */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
- in_be32(&par_io[port].cppar2):
- in_be32(&par_io[port].cppar1);
- pin_2bit_assign = (u32)(assign
- << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Clear and set 2 bits mask */
- if (pin > (NUM_OF_PINS/2) - 1) {
- out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val);
- } else {
- out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val);
- }
-}
-
-#endif /* CONFIG_QE */
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- * Kumar Gala <kumar.gala@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/* To boot secondary cpus, we need a place for them to start up.
- * Normally, they start at 0xfffffffc, but that's usually the
- * firmware, and we don't want to have to run the firmware again.
- * Instead, the primary cpu will set the BPTR to point here to
- * this page. We then set up the core, and head to
- * start_secondary. Note that this means that the code below
- * must never exceed 1023 instructions (the branch at the end
- * would then be the 1024th).
- */
- .globl __secondary_start_page
- .align 12
-__secondary_start_page:
-/* First do some preliminary setup */
- lis r3, HID0_EMCP@h /* enable machine check */
-#ifndef CONFIG_E500MC
- ori r3,r3,HID0_TBEN@l /* enable Timebase */
-#endif
-#ifdef CONFIG_PHYS_64BIT
- ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */
-#endif
- mtspr SPRN_HID0,r3
-
-#ifndef CONFIG_E500MC
- li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
- mfspr r0,PVR
- andi. r0,r0,0xff
- cmpwi r0,0x50@l /* if we are rev 5.0 or greater set MBDD */
- blt 1f
- /* Set MBDD bit also */
- ori r3, r3, HID1_MBDD@l
-1:
- mtspr SPRN_HID1,r3
-#endif
-
- /* Enable branch prediction */
- lis r3,BUCSR_ENABLE@h
- ori r3,r3,BUCSR_ENABLE@l
- mtspr SPRN_BUCSR,r3
-
- /* Ensure TB is 0 */
- li r3,0
- mttbl r3
- mttbu r3
-
- /* Enable/invalidate the I-Cache */
- lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
- ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
- mtspr SPRN_L1CSR1,r2
-1:
- mfspr r3,SPRN_L1CSR1
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
- ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
- mtspr SPRN_L1CSR1,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR1
- andi. r1,r3,L1CSR1_ICE@l
- beq 2b
-
- /* Enable/invalidate the D-Cache */
- lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
- ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
- mtspr SPRN_L1CSR0,r2
-1:
- mfspr r3,SPRN_L1CSR0
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
- ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
- mtspr SPRN_L1CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR0
- andi. r1,r3,L1CSR0_DCE@l
- beq 2b
-
-#define toreset(x) (x - __secondary_start_page + 0xfffff000)
-
- /* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
-
- /* r10 has the base address for the entry */
- mfspr r0,SPRN_PIR
-#ifdef CONFIG_E500MC
- rlwinm r4,r0,27,27,31
-#else
- mr r4,r0
-#endif
- slwi r8,r4,5
- add r10,r3,r8
-
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
-#ifdef CONFIG_BACKSIDE_L2_CACHE
- /* Enable/invalidate the L2 cache */
- msync
- lis r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
- ori r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
- mtspr SPRN_L2CSR0,r2
-1:
- mfspr r3,SPRN_L2CSR0
- and. r1,r3,r2
- bne 1b
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- /* set stash id to (coreID) * 2 + 32 + L2 (1) */
- addi r3,r8,1
- mtspr SPRN_L2CSR1,r3
-#endif
-
- lis r3,CONFIG_SYS_INIT_L2CSR0@h
- ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l
- mtspr SPRN_L2CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L2CSR0
- andis. r1,r3,L2CSR0_L2E@h
- beq 2b
-#endif
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r0,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
- lwz r13,0(r13)
-
- /* setup mapping for AS = 1, and jump there */
- lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
- mtspr SPRN_MAS0,r11
- lis r11,(MAS1_VALID|MAS1_IPROT)@h
- ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
- mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
- mtspr SPRN_MAS2,r11
- oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
- ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
- mtspr SPRN_MAS3,r11
- tlbwe
-
- bl 1f
-1: mflr r11
- /*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
- */
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
- mfmsr r13
- ori r12,r13,MSR_IS|MSR_DS@l
-
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- rfi
-
- /* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
- andi. r11,r4,1
- bne 2b
- isync
-
- /* setup IVORs to match fixed offsets */
-#include "fixed_ivor.S"
-
- /* get the upper bits of the addr */
- lwz r11,ENTRY_ADDR_UPPER(r10)
-
- /* setup branch addr */
- mtspr SPRN_SRR0,r4
-
- /* mark the entry as released */
- li r8,3
- stw r8,ENTRY_ADDR_LOWER(r10)
-
- /* mask by ~64M to setup our tlb we will jump to */
- rlwinm r12,r4,0,0,5
-
- /* setup r3, r4, r5, r6, r7, r8, r9 */
- lwz r3,ENTRY_R3_LOWER(r10)
- li r4,0
- li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
- lis r7,(64*1024*1024)@h
- li r8,0
- li r9,0
-
- /* load up the pir */
- lwz r0,ENTRY_PIR(r10)
- mtspr SPRN_PIR,r0
- mfspr r0,SPRN_PIR
- stw r0,ENTRY_PIR(r10)
-
- mtspr IVPR,r12
-/*
- * Coming here, we know the cpu has one TLB mapping in TLB1[0]
- * which maps 0xfffff000-0xffffffff one-to-one. We set up a
- * second mapping that maps addr 1:1 for 64M, and then we jump to
- * addr
- */
- lis r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
- mtspr SPRN_MAS0,r10
- lis r10,(MAS1_VALID|MAS1_IPROT)@h
- ori r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
- mtspr SPRN_MAS1,r10
- /* WIMGE = 0b00000 for now */
- mtspr SPRN_MAS2,r12
- ori r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
- mtspr SPRN_MAS3,r12
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr SPRN_MAS7,r11
-#endif
- tlbwe
-
-/* Now we have another mapping for this page, so we jump to that
- * mapping
- */
- mtspr SPRN_SRR1,r13
- rfi
-
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
-
- .align L1_CACHE_SHIFT
- .globl __spin_table
-__spin_table:
- .space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
+++ /dev/null
- .section .resetvec,"ax"
- b _start_e500
+++ /dev/null
-/*
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- * Modified based on 8260 for 8560.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
- */
-
-/*
- * Minimal serial functions needed to use one of the SCC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <asm/cpm_85xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SCC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
-
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
-
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
-
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
-
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-int serial_init (void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ccsr_cpm_scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
- uint dpaddr;
-
- /* initialize pointers to SCC */
-
- sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
-
- /* Disable transmitter/receiver.
- */
- sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- cpm->im_cpm_mux.cmxscr = \
- (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
- serial_setbrg ();
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->sccm = 0;
- sp->scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS no flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->psmr = SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- unsigned char c;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-int
-serial_tstc()
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
-}
-
-#endif /* CONFIG_CONS_ON_SCC */
+++ /dev/null
-/*
- * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* --------------------------------------------------------------- */
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_CORENET
- volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
-
- const u8 core_cplx_PLL[16] = {
- [ 0] = 0, /* CC1 PPL / 1 */
- [ 1] = 0, /* CC1 PPL / 2 */
- [ 2] = 0, /* CC1 PPL / 4 */
- [ 4] = 1, /* CC2 PPL / 1 */
- [ 5] = 1, /* CC2 PPL / 2 */
- [ 6] = 1, /* CC2 PPL / 4 */
- [ 8] = 2, /* CC3 PPL / 1 */
- [ 9] = 2, /* CC3 PPL / 2 */
- [10] = 2, /* CC3 PPL / 4 */
- [12] = 3, /* CC4 PPL / 1 */
- [13] = 3, /* CC4 PPL / 2 */
- [14] = 3, /* CC4 PPL / 4 */
- };
-
- const u8 core_cplx_PLL_div[16] = {
- [ 0] = 1, /* CC1 PPL / 1 */
- [ 1] = 2, /* CC1 PPL / 2 */
- [ 2] = 4, /* CC1 PPL / 4 */
- [ 4] = 1, /* CC2 PPL / 1 */
- [ 5] = 2, /* CC2 PPL / 2 */
- [ 6] = 4, /* CC2 PPL / 4 */
- [ 8] = 1, /* CC3 PPL / 1 */
- [ 9] = 2, /* CC3 PPL / 2 */
- [10] = 4, /* CC3 PPL / 4 */
- [12] = 1, /* CC4 PPL / 1 */
- [13] = 2, /* CC4 PPL / 2 */
- [14] = 4, /* CC4 PPL / 4 */
- };
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
-
- sysInfo->freqSystemBus = sysclk;
- sysInfo->freqDDRBus = sysclk;
- freqCC_PLL[0] = sysclk;
- freqCC_PLL[1] = sysclk;
- freqCC_PLL[2] = sysclk;
- freqCC_PLL[3] = sysclk;
-
- sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0x1f);
- freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
- freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
- freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
- freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
-
- rcw_tmp = in_be32(&gur->rcwsr[3]);
- for (i = 0; i < cpu_numcores(); i++) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf;
- u32 cplx_pll = core_cplx_PLL[c_pll_sel];
-
- sysInfo->freqProcessor[i] =
- freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
- }
-
-#define PME_CLK_SEL 0x80000000
-#define FM1_CLK_SEL 0x40000000
-#define FM2_CLK_SEL 0x20000000
- rcw_tmp = in_be32(&gur->rcwsr[7]);
-
-#ifdef CONFIG_SYS_DPAA_PME
- if (rcw_tmp & PME_CLK_SEL)
- sysInfo->freqPME = freqCC_PLL[2] / 2;
- else
- sysInfo->freqPME = sysInfo->freqSystemBus / 2;
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- if (rcw_tmp & FM1_CLK_SEL)
- sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
- else
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
-#if (CONFIG_SYS_NUM_FMAN) == 2
- if (rcw_tmp & FM2_CLK_SEL)
- sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
- else
- sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
-#endif
-#endif
-
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
- uint lcrr_div;
- int i;
-#ifdef CONFIG_QE
- u32 qe_ratio;
-#endif
-
- plat_ratio = (gur->porpllsr) & 0x0000003e;
- plat_ratio >>= 1;
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
-
- /* Divide before multiply to avoid integer
- * overflow for processor speeds above 2GHz */
- half_freqSystemBus = sysInfo->freqSystemBus/2;
- for (i = 0; i < cpu_numcores(); i++) {
- e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
- sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
- }
-
- /* Note: freqDDRBus is the MCLK frequency, not the data rate. */
- sysInfo->freqDDRBus = sysInfo->freqSystemBus;
-
-#ifdef CONFIG_DDR_CLK_FREQ
- {
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
- if (ddr_ratio != 0x7)
- sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
- }
-#endif
-#endif
-
-#ifdef CONFIG_QE
- qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
- >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
- sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
-#endif
-
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- {
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
- }
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-#if defined(CONFIG_FSL_CORENET)
- /* If this is corenet based SoC, bit-representation
- * for four times the clock divider values.
- */
- lcrr_div *= 4;
-#elif !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
- !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- lcrr_div *= 2;
-#endif
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
- } else {
- /* In case anyone cares what the unknown value is */
- sysInfo->freqLocalBus = lcrr_div;
- }
-}
-
-
-int get_clocks (void)
-{
- sys_info_t sys_info;
-#ifdef CONFIG_MPC8544
- volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#endif
-#if defined(CONFIG_CPM2)
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint sccr, dfbrg;
-
- /* set VCO = 4 * BRG */
- cpm->im_cpm_intctl.sccr &= 0xfffffffc;
- sccr = cpm->im_cpm_intctl.sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-#endif
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor[0];
- gd->bus_clk = sys_info.freqSystemBus;
- gd->mem_clk = sys_info.freqDDRBus;
- gd->lbc_clk = sys_info.freqLocalBus;
-
-#ifdef CONFIG_QE
- gd->qe_clk = sys_info.freqQE;
- gd->brg_clk = gd->qe_clk / 2;
-#endif
- /*
- * The base clock for I2C depends on the actual SOC. Unfortunately,
- * there is no pattern that can be used to determine the frequency, so
- * the only choice is to look up the actual SOC number and use the value
- * for that SOC. This information is taken from application note
- * AN2919.
- */
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
- defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
- gd->i2c1_clk = sys_info.freqSystemBus;
-#elif defined(CONFIG_MPC8544)
- /*
- * On the 8544, the I2C clock is the same as the SEC clock. This can be
- * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
- * 4.4.3.3 of the 8544 RM. Note that this might actually work for all
- * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
- * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
- */
- if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->i2c1_clk = sys_info.freqSystemBus / 3;
- else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#else
- /* Most 85xx SOCs use CCB/2, so this is the default behavior. */
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#endif
- gd->i2c2_clk = gd->i2c1_clk;
-
-#if defined(CONFIG_FSL_ESDHC)
-#ifdef CONFIG_MPC8569
- gd->sdhc_clk = gd->bus_clk;
-#else
- gd->sdhc_clk = gd->bus_clk / 2;
-#endif
-#endif /* defined(CONFIG_FSL_ESDHC) */
-
-#if defined(CONFIG_CPM2)
- gd->vco_out = 2*sys_info.freqSystemBus;
- gd->cpm_clk = gd->vco_out / 2;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
-#endif
-
- if(gd->cpu_clk != 0) return (0);
- else return (1);
-}
-
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- return gd->bus_clk;
-}
-
-/********************************************
- * get_ddr_freq
- * return ddr bus freq in Hz
- *********************************************/
-ulong get_ddr_freq (ulong dummy)
-{
- return gd->mem_clk;
-}
+++ /dev/null
-/*
- * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc.
- * Copyright (C) 2003 Motorola,Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards
- *
- * The processor starts at 0xfffffffc and the code is first executed in the
- * last 4K page(0xfffff000-0xffffffff) in flash/rom.
- *
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
-#ifndef CONFIG_NAND_SPL
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-#endif
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * e500 Startup -- after reset only the last 4KB of the effective
- * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
- * section is located at THIS LAST page and basically does three
- * things: clear some registers, set up exception tables and
- * add more TLB entries for 'larger spaces'(e.g. the boot rom) to
- * continue the boot procedure.
-
- * Once the boot rom is mapped by TLB entries we can proceed
- * with normal startup.
- *
- */
-
- .section .bootpg,"ax"
- .globl _start_e500
-
-_start_e500:
-
-/* clear registers/arrays not reset by hardware */
-
- /* L1 */
- li r0,2
- mtspr L1CSR0,r0 /* invalidate d-cache */
- mtspr L1CSR1,r0 /* invalidate i-cache */
-
- mfspr r1,DBSR
- mtspr DBSR,r1 /* Clear all valid bits */
-
- /*
- * Enable L1 Caches early
- *
- */
-
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- li r2,(32 + 0)
- mtspr L1CSR2,r2
-#endif
-
- /* Enable/invalidate the I-Cache */
- lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
- ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
- mtspr SPRN_L1CSR1,r2
-1:
- mfspr r3,SPRN_L1CSR1
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
- ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
- mtspr SPRN_L1CSR1,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR1
- andi. r1,r3,L1CSR1_ICE@l
- beq 2b
-
- /* Enable/invalidate the D-Cache */
- lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
- ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
- mtspr SPRN_L1CSR0,r2
-1:
- mfspr r3,SPRN_L1CSR0
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
- ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
- mtspr SPRN_L1CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR0
- andi. r1,r3,L1CSR0_DCE@l
- beq 2b
-
- /* Setup interrupt vectors */
- lis r1,TEXT_BASE@h
- mtspr IVPR,r1
-
- li r1,0x0100
- mtspr IVOR0,r1 /* 0: Critical input */
- li r1,0x0200
- mtspr IVOR1,r1 /* 1: Machine check */
- li r1,0x0300
- mtspr IVOR2,r1 /* 2: Data storage */
- li r1,0x0400
- mtspr IVOR3,r1 /* 3: Instruction storage */
- li r1,0x0500
- mtspr IVOR4,r1 /* 4: External interrupt */
- li r1,0x0600
- mtspr IVOR5,r1 /* 5: Alignment */
- li r1,0x0700
- mtspr IVOR6,r1 /* 6: Program check */
- li r1,0x0800
- mtspr IVOR7,r1 /* 7: floating point unavailable */
- li r1,0x0900
- mtspr IVOR8,r1 /* 8: System call */
- /* 9: Auxiliary processor unavailable(unsupported) */
- li r1,0x0a00
- mtspr IVOR10,r1 /* 10: Decrementer */
- li r1,0x0b00
- mtspr IVOR11,r1 /* 11: Interval timer */
- li r1,0x0c00
- mtspr IVOR12,r1 /* 12: Watchdog timer */
- li r1,0x0d00
- mtspr IVOR13,r1 /* 13: Data TLB error */
- li r1,0x0e00
- mtspr IVOR14,r1 /* 14: Instruction TLB error */
- li r1,0x0f00
- mtspr IVOR15,r1 /* 15: Debug */
-
- /* Clear and set up some registers. */
- li r0,0x0000
- lis r1,0xffff
- mtspr DEC,r0 /* prevent dec exceptions */
- mttbl r0 /* prevent fit & wdt exceptions */
- mttbu r0
- mtspr TSR,r1 /* clear all timer exception status */
- mtspr TCR,r0 /* disable all */
- mtspr ESR,r0 /* clear exception syndrome register */
- mtspr MCSR,r0 /* machine check syndrome register */
- mtxer r0 /* clear integer exception register */
-
-#ifdef CONFIG_SYS_BOOK3E_HV
- mtspr MAS8,r0 /* make sure MAS8 is clear */
-#endif
-
- /* Enable Time Base and Select Time Base Clock */
- lis r0,HID0_EMCP@h /* Enable machine check */
-#if defined(CONFIG_ENABLE_36BIT_PHYS)
- ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
-#endif
-#ifndef CONFIG_E500MC
- ori r0,r0,HID0_TBEN@l /* Enable Timebase */
-#endif
- mtspr HID0,r0
-
-#ifndef CONFIG_E500MC
- li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
- mfspr r3,PVR
- andi. r3,r3, 0xff
- cmpwi r3,0x50@l /* if we are rev 5.0 or greater set MBDD */
- blt 1f
- /* Set MBDD bit also */
- ori r0, r0, HID1_MBDD@l
-1:
- mtspr HID1,r0
-#endif
-
- /* Enable Branch Prediction */
-#if defined(CONFIG_BTB)
- lis r0,BUCSR_ENABLE@h
- ori r0,r0,BUCSR_ENABLE@l
- mtspr SPRN_BUCSR,r0
-#endif
-
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr DBCR0,r0
-#endif
-
-#ifdef CONFIG_MPC8569
-#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
-#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
-
- /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
- * use address space which is more than 12bits, and it must be done in
- * the 4K boot page. So we set this bit here.
- */
-
- /* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- /* Set LBCR register */
- lis r4,CONFIG_SYS_LBCR_ADDR@h
- ori r4,r4,CONFIG_SYS_LBCR_ADDR@l
-
- lis r5,CONFIG_SYS_LBC_LBCR@h
- ori r5,r5,CONFIG_SYS_LBC_LBCR@l
- stw r5,0(r4)
- isync
-
- /* invalidate this temp TLB */
- lis r4,CONFIG_SYS_LBC_ADDR@h
- ori r4,r4,CONFIG_SYS_LBC_ADDR@l
- tlbivax 0,r4
- isync
-
-#endif /* CONFIG_MPC8569 */
-
- lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-#else
- /*
- * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
- * image has been relocated to TEXT_BASE on the second stage.
- */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-#endif
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- /* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- lis r6,MSR_IS|MSR_DS@h
- ori r6,r6,MSR_IS|MSR_DS@l
- lis r7,switch_as@h
- ori r7,r7,switch_as@l
-
- mtspr SPRN_SRR0,r7
- mtspr SPRN_SRR1,r6
- rfi
-
-switch_as:
-/* L1 DCache is used for initial RAM */
-
- /* Allocate Initial RAM in data cache.
- */
- lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- mfspr r2, L1CFG0
- andi. r2, r2, 0x1ff
- /* cache size * 1024 / (2 * L1 line size) */
- slwi r2, r2, (10 - 1 - L1_CACHE_SHIFT)
- mtctr r2
- li r0,0
-1:
- dcbz r0,r3
- dcbtls 0,r0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
-
- /* Jump out the last 4K page and continue to 'normal' start */
-#ifdef CONFIG_SYS_RAMBOOT
- b _start_cont
-#else
- /* Calculate absolute address in FLASH and jump there */
- /*--------------------------------------------------------------*/
- lis r3,CONFIG_SYS_MONITOR_BASE@h
- ori r3,r3,CONFIG_SYS_MONITOR_BASE@l
- addi r3,r3,_start_cont - _start + _START_OFFSET
- mtlr r3
- blr
-#endif
-
- .text
- .globl _start
-_start:
- .long 0x27051956 /* U-BOOT Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- .align 4
- .globl _start_cont
-_start_cont:
- /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
-
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0,RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
- GET_GOT
- bl cpu_init_early_f
-
- /* switch back to AS = 0 */
- lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
- ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
- mtmsr r3
- isync
-
- bl cpu_init_f
- bl board_init_f
- isync
-
-#ifndef CONFIG_NAND_SPL
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
-
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x0300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x0400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
-
-/* Alignment exception. */
- . = 0x0600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x0700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC85xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
-
- . = 0x0900
-/*
- * r0 - SYSCALL number
- * r3-... arguments
- */
-SystemCall:
- addis r11,r0,0 /* get functions table addr */
- ori r11,r11,0 /* Note: this code is patched in trap_init */
- addis r12,r0,0 /* get number of functions */
- ori r12,r12,0
-
- cmplw 0,r0,r12
- bge 1f
-
- rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
- add r11,r11,r0
- lwz r11,0(r11)
-
- li r20,0xd00-4 /* Get stack pointer */
- lwz r12,0(r20)
- subi r12,r12,12 /* Adjust stack pointer */
- li r0,0xc00+_end_back-SystemCall
- cmplw 0,r0,r12 /* Check stack overflow */
- bgt 1f
- stw r12,0(r20)
-
- mflr r0
- stw r0,0(r12)
- mfspr r0,SRR0
- stw r0,4(r12)
- mfspr r0,SRR1
- stw r0,8(r12)
-
- li r12,0xc00+_back-SystemCall
- mtlr r12
- mtspr SRR0,r11
-
-1: SYNC
- rfi
-_back:
-
- mfmsr r11 /* Disable interrupts */
- li r12,0
- ori r12,r12,MSR_EE
- andc r11,r11,r12
- SYNC /* Some chip revs need this... */
- mtmsr r11
- SYNC
-
- li r12,0xd00-4 /* restore regs */
- lwz r12,0(r12)
-
- lwz r11,0(r12)
- mtlr r11
- lwz r11,4(r12)
- mtspr SRR0,r11
- lwz r11,8(r12)
- mtspr SRR1,r11
-
- addi r12,r12,12 /* Adjust stack pointer */
- li r20,0xd00-4
- stw r12,0(r20)
-
- SYNC
- rfi
-_end_back:
-
- STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
- STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
- STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
-
- STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
- STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
-
- CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = . + (0x100 - ( . & 0xff )) /* align for debug */
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
-
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
-
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-
-/* Cache functions.
-*/
-.globl invalidate_icache
-invalidate_icache:
- mfspr r0,L1CSR1
- ori r0,r0,L1CSR1_ICFI
- msync
- isync
- mtspr L1CSR1,r0
- isync
- blr /* entire I cache */
-
-.globl invalidate_dcache
-invalidate_dcache:
- mfspr r0,L1CSR0
- ori r0,r0,L1CSR0_DCFI
- msync
- isync
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl icache_enable
-icache_enable:
- mflr r8
- bl invalidate_icache
- mtlr r8
- isync
- mfspr r4,L1CSR1
- ori r4,r4,0x0001
- oris r4,r4,0x0001
- mtspr L1CSR1,r4
- isync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r0,L1CSR1
- lis r3,0
- ori r3,r3,L1CSR1_ICE
- andc r0,r0,r3
- mtspr L1CSR1,r0
- isync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3,L1CSR1
- andi. r3,r3,L1CSR1_ICE
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
- bl invalidate_dcache
- mtlr r8
- isync
- mfspr r0,L1CSR0
- ori r0,r0,0x0001
- oris r0,r0,0x0001
- msync
- isync
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3,L1CSR0
- lis r4,0
- ori r4,r4,L1CSR0_DCE
- andc r3,r3,r4
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3,L1CSR0
- andi. r3,r3,L1CSR0_DCE
- blr
-
- .globl get_pir
-get_pir:
- mfspr r3,PIR
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3,PVR
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3,SVR
- blr
-
- .globl wr_tcr
-wr_tcr:
- mtspr TCR,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-#endif /* !CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void write_tlb(mas0, mas1, mas2, mas3, mas7)
- */
- .globl write_tlb
-write_tlb:
- mtspr MAS0,r3
- mtspr MAS1,r4
- mtspr MAS2,r5
- mtspr MAS3,r6
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr MAS7,r7
-#endif
- li r3,0
-#ifdef CONFIG_SYS_BOOK3E_HV
- mtspr MAS8,r3
-#endif
- isync
- tlbwe
- msync
- isync
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1,r3 /* Set new stack pointer */
- mr r9,r4 /* Save copy of Init Data pointer */
- mr r10,r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3,r5 /* Destination Address */
- lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4,r4,CONFIG_SYS_MONITOR_BASE@l
- lwz r5,GOT(__init_end)
- sub r5,r5,r4
- li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15,r10,r4
-
- /* First our own GOT */
- add r12,r12,r15
- /* the the one used by the C code */
- add r30,r30,r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
- /*
- * Re-point the IVPR at RAM
- */
- mtspr IVPR,r10
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0,r10,in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
- .globl in_ram
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0,r3,r4
- beq 6f
-
- li r0,0
-5:
- stw r0,0(r3)
- addi r3,r3,4
- cmplw 0,r3,r4
- bne 5b
-6:
-
- mr r3,r9 /* Init Data pointer */
- mr r4,r10 /* Destination Address */
- bl board_init_r
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7,GOT(_start_of_vectors)
- lwz r8,GOT(_end_of_vectors)
-
- li r9,0x100 /* reset vector always at 0x100 */
-
- cmplw 0,r7,r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0,0(r7)
- stw r0,0(r9)
- addi r7,r7,4
- addi r9,r9,4
- cmplw 0,r7,r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7,.L_CriticalInput - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_MachineCheck - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_DataStorage - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_InstStorage - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_ExtInterrupt - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_Alignment - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_IntervalTimer - _start + _START_OFFSET
- li r8,_end_of_vectors - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7,r7,0x100 /* next exception vector */
- cmplw 0,r7,r8
- blt 2b
-
- lis r7,0x0
- mtspr IVPR,r7
-
- mtlr r4 /* restore link register */
- blr
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
- ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
- mfspr r4,L1CFG0
- andi. r4,r4,0x1ff
- slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
- mtctr r4
-1: dcbi r0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync
-
- /* Invalidate the TLB entries for the cache */
- lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- isync
- blr
-
-.globl flush_dcache
-flush_dcache:
- mfspr r3,SPRN_L1CFG0
-
- rlwinm r5,r3,9,3 /* Extract cache block size */
- twlgti r5,1 /* Only 32 and 64 byte cache blocks
- * are currently defined.
- */
- li r4,32
- subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
- * log2(number of ways)
- */
- slw r5,r4,r5 /* r5 = cache block size */
-
- rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
- mulli r7,r7,13 /* An 8-way cache will require 13
- * loads per set.
- */
- slw r7,r7,r6
-
- /* save off HID0 and set DCFA */
- mfspr r8,SPRN_HID0
- ori r9,r8,HID0_DCFA@l
- mtspr SPRN_HID0,r9
- isync
-
- lis r4,0
- mtctr r7
-
-1: lwz r3,0(r4) /* Load... */
- add r4,r4,r5
- bdnz 1b
-
- msync
- lis r4,0
- mtctr r7
-
-1: dcbf 0,r4 /* ...and flush. */
- add r4,r4,r5
- bdnz 1b
-
- /* restore HID0 */
- mtspr SPRN_HID0,r8
- isync
-
- blr
-
-.globl setup_ivors
-setup_ivors:
-
-#include "fixed_ivor.S"
- blr
-#endif /* !CONFIG_NAND_SPL */
+++ /dev/null
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#ifdef CONFIG_ADDR_MAP
-#include <addr_map.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void invalidate_tlb(u8 tlb)
-{
- if (tlb == 0)
- mtspr(MMUCSR0, 0x4);
- if (tlb == 1)
- mtspr(MMUCSR0, 0x2);
-}
-
-void init_tlbs(void)
-{
- int i;
-
- for (i = 0; i < num_tlb_entries; i++) {
- write_tlb(tlb_table[i].mas0,
- tlb_table[i].mas1,
- tlb_table[i].mas2,
- tlb_table[i].mas3,
- tlb_table[i].mas7);
- }
-
- return ;
-}
-
-#ifndef CONFIG_NAND_SPL
-static inline void use_tlb_cam(u8 idx)
-{
- int i = idx / 32;
- int bit = idx % 32;
-
- gd->used_tlb_cams[i] |= (1 << bit);
-}
-
-static inline void free_tlb_cam(u8 idx)
-{
- int i = idx / 32;
- int bit = idx % 32;
-
- gd->used_tlb_cams[i] &= ~(1 << bit);
-}
-
-void init_used_tlb_cams(void)
-{
- int i;
- unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
-
- for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
- gd->used_tlb_cams[i] = 0;
-
- /* walk all the entries */
- for (i = 0; i < num_cam; i++) {
- u32 _mas1;
-
- mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
- asm volatile("tlbre;isync");
- _mas1 = mfspr(MAS1);
-
- /* if the entry isn't valid skip it */
- if ((_mas1 & MAS1_VALID))
- use_tlb_cam(i);
- }
-}
-
-int find_free_tlbcam(void)
-{
- int i;
- u32 idx;
-
- for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
- idx = ffz(gd->used_tlb_cams[i]);
-
- if (idx != 32)
- break;
- }
-
- idx += i * 32;
-
- if (idx >= CONFIG_SYS_NUM_TLBCAMS)
- return -1;
-
- return idx;
-}
-
-void set_tlb(u8 tlb, u32 epn, u64 rpn,
- u8 perms, u8 wimge,
- u8 ts, u8 esel, u8 tsize, u8 iprot)
-{
- u32 _mas0, _mas1, _mas2, _mas3, _mas7;
-
- if (tlb == 1)
- use_tlb_cam(esel);
-
- _mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
- _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
- _mas2 = FSL_BOOKE_MAS2(epn, wimge);
- _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
- _mas7 = FSL_BOOKE_MAS7(rpn);
-
- write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
-
-#ifdef CONFIG_ADDR_MAP
- if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
- addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
-#endif
-}
-
-void disable_tlb(u8 esel)
-{
- u32 _mas0, _mas1, _mas2, _mas3, _mas7;
-
- free_tlb_cam(esel);
-
- _mas0 = FSL_BOOKE_MAS0(1, esel, 0);
- _mas1 = 0;
- _mas2 = 0;
- _mas3 = 0;
- _mas7 = 0;
-
- mtspr(MAS0, _mas0);
- mtspr(MAS1, _mas1);
- mtspr(MAS2, _mas2);
- mtspr(MAS3, _mas3);
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr(MAS7, _mas7);
-#endif
- asm volatile("isync;msync;tlbwe;isync");
-
-#ifdef CONFIG_ADDR_MAP
- if (gd->flags & GD_FLG_RELOC)
- addrmap_set_entry(0, 0, 0, esel);
-#endif
-}
-
-static void tlbsx (const volatile unsigned *addr)
-{
- __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
-}
-
-/* return -1 if we didn't find anything */
-int find_tlb_idx(void *addr, u8 tlbsel)
-{
- u32 _mas0, _mas1;
-
- /* zero out Search PID, AS */
- mtspr(MAS6, 0);
-
- tlbsx(addr);
-
- _mas0 = mfspr(MAS0);
- _mas1 = mfspr(MAS1);
-
- /* we found something, and its in the TLB we expect */
- if ((MAS1_VALID & _mas1) &&
- (MAS0_TLBSEL(tlbsel) == (_mas0 & MAS0_TLBSEL_MSK))) {
- return ((_mas0 & MAS0_ESEL_MSK) >> 16);
- }
-
- return -1;
-}
-
-#ifdef CONFIG_ADDR_MAP
-void init_addr_map(void)
-{
- int i;
- unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
-
- /* walk all the entries */
- for (i = 0; i < num_cam; i++) {
- unsigned long epn;
- u32 tsize, _mas1;
- phys_addr_t rpn;
-
- mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
- asm volatile("tlbre;isync");
- _mas1 = mfspr(MAS1);
-
- /* if the entry isn't valid skip it */
- if (!(_mas1 & MAS1_VALID))
- continue;
-
- tsize = (_mas1 >> 8) & 0xf;
- epn = mfspr(MAS2) & MAS2_EPN;
- rpn = mfspr(MAS3) & MAS3_RPN;
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- rpn |= ((phys_addr_t)mfspr(MAS7)) << 32;
-#endif
-
- addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i);
- }
-
- return ;
-}
-#endif
-
-unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
-{
- int i;
- unsigned int tlb_size;
- unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
- unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
- u64 size, memsize = (u64)memsize_in_meg << 20;
-
- size = min(memsize, CONFIG_MAX_MEM_MAPPED);
-
- /* Convert (4^max) kB to (2^max) bytes */
- max_cam = max_cam * 2 + 10;
-
- for (i = 0; size && i < 8; i++) {
- int ram_tlb_index = find_free_tlbcam();
- u32 camsize = __ilog2_u64(size) & ~1U;
- u32 align = __ilog2(ram_tlb_address) & ~1U;
-
- if (ram_tlb_index == -1)
- break;
-
- if (align == -2) align = max_cam;
- if (camsize > align)
- camsize = align;
-
- if (camsize > max_cam)
- camsize = max_cam;
-
- tlb_size = (camsize - 10) / 2;
-
- set_tlb(1, ram_tlb_address, ram_tlb_address,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, ram_tlb_index, tlb_size, 1);
-
- size -= 1ULL << camsize;
- memsize -= 1ULL << camsize;
- ram_tlb_address += 1UL << camsize;
- }
-
- if (memsize)
- print_size(memsize, " left unmapped\n");
-
- /*
- * Confirm that the requested amount of memory was mapped.
- */
- return memsize_in_meg;
-}
-#endif /* !CONFIG_NAND_SPL */
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright 2007 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola
- * Modified by Xianghua Xiao(x.xiao@motorola.com)
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-static __inline__ void set_tsr(unsigned long val)
-{
- asm volatile("mtspr 0x150, %0" : : "r" (val));
-}
-
-static __inline__ unsigned long get_esr(void)
-{
- unsigned long val;
- asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
- return val;
-}
-
-#define ESR_MCI 0x80000000
-#define ESR_PIL 0x08000000
-#define ESR_PPR 0x04000000
-#define ESR_PTR 0x02000000
-#define ESR_DST 0x00800000
-#define ESR_DIZ 0x00400000
-#define ESR_U0F 0x00008000
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-CritcalInputException(struct pt_regs *regs)
-{
- panic("Critical Input Exception");
-}
-
-int machinecheck_count = 0;
-int machinecheck_error = 0;
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
- unsigned int mcsr, mcsrr0, mcsrr1, mcar;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
- mcsrr0 = mfspr(SPRN_MCSRR0);
- mcsrr1 = mfspr(SPRN_MCSRR1);
- mcsr = mfspr(SPRN_MCSR);
- mcar = mfspr(SPRN_MCAR);
-
- machinecheck_count++;
- machinecheck_error=1;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from mcsr): ");
- printf("mcsr = 0x%08x\n", mcsr);
- if (mcsr & 0x80000000)
- printf("Machine check input pin\n");
- if (mcsr & 0x40000000)
- printf("Instruction cache parity error\n");
- if (mcsr & 0x20000000)
- printf("Data cache push parity error\n");
- if (mcsr & 0x10000000)
- printf("Data cache parity error\n");
- if (mcsr & 0x00000080)
- printf("Bus instruction address error\n");
- if (mcsr & 0x00000040)
- printf("Bus Read address error\n");
- if (mcsr & 0x00000020)
- printf("Bus Write address error\n");
- if (mcsr & 0x00000010)
- printf("Bus Instruction data bus error\n");
- if (mcsr & 0x00000008)
- printf("Bus Read data bus error\n");
- if (mcsr & 0x00000004)
- printf("Bus Write bus error\n");
- if (mcsr & 0x00000002)
- printf("Bus Instruction parity error\n");
- if (mcsr & 0x00000001)
- printf("Bus Read parity error\n");
-
- show_regs(regs);
- printf("MCSR=0x%08x \tMCSRR0=0x%08x \nMCSRR1=0x%08x \tMCAR=0x%08x\n",
- mcsr, mcsrr0, mcsrr1, mcar);
- print_backtrace((unsigned long *)regs->gpr[1]);
- if (machinecheck_count > 10) {
- panic("machine check count too high\n");
- }
-
- if (machinecheck_count > 1) {
- regs->nip += 4; /* skip offending instruction */
- printf("Skipping current instr, Returning to 0x%08lx\n",
- regs->nip);
- } else {
- printf("Returning back to 0x%08lx\n",regs->nip);
- }
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- long esr_val;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
-
- esr_val = get_esr();
- if( esr_val & ESR_PIL )
- printf( "** Illegal Instruction **\n" );
- else if( esr_val & ESR_PPR )
- printf( "** Privileged Instruction **\n" );
- else if( esr_val & ESR_PTR )
- printf( "** Trap Instruction **\n" );
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-PITException(struct pt_regs *regs)
-{
- /*
- * Reset PIT interrupt
- */
- set_tsr(0x0c000000);
-
- /*
- * Call timer_interrupt routine in interrupts.c
- */
- timer_interrupt(NULL);
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-ExtIntException(struct pt_regs *regs)
-{
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
-
- uint vect;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
- regs->nip, regs->msr, regs->trap);
- vect = pic->iack0;
- printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect);
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- .bootpg ADDR(.text) - 0x1000 :
- {
- arch/ppc/cpu/mpc85xx/start.o (.bootpg)
- } :text = 0xffff
-
- . = ADDR(.text) + 0x80000;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de
- *
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- . = 0xfff00000;
- .text : {
- *(.text)
- }
- _etext = .;
-
- .reloc : {
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- . = ALIGN(8);
- .data : {
- *(.rodata*)
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
-
- . = ALIGN(8);
- __init_begin = .;
- __init_end = .;
-
- .resetvec ADDR(.text) + 0xffc : {
- *(.resetvec)
- } = 0xffff
-
- __bss_start = .;
- .bss : {
- *(.sbss)
- *(.bss)
- }
- _end = .;
-}
-ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big");
+++ /dev/null
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- .bootpg RESET_VECTOR_ADDRESS - 0xffc :
- {
- arch/ppc/cpu/mpc85xx/start.o (.bootpg)
- } :text = 0xffff
-
- .resetvec RESET_VECTOR_ADDRESS :
- {
- *(.resetvec)
- } :text = 0xffff
-
- . = RESET_VECTOR_ADDRESS + 0x4;
-
- /*
- * Make sure that the bss segment isn't linked at 0x0, otherwise its
- * address won't be updated during relocation fixups. Note that
- * this is a temporary fix. Code to dynamically the fixup the bss
- * location will be added in the future. When the bss relocation
- * fixup code is present this workaround should be removed.
- */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
- . |= 0x10;
-#endif
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# Copyright 2007 Freescale Semiconductor, Inc.
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao,X.Xiao@motorola.com
-#
-# (C) Copyright 2004 Freescale Semiconductor. (MC86xx Port)
-# Jeff Brown
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-
-SOBJS-y += cache.o
-SOBJS-$(CONFIG_MP) += release.o
-
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-# 8610 & 8641 are identical w/regards to DDR
-COBJS-$(CONFIG_MPC8610) += ddr-8641.o
-COBJS-$(CONFIG_MPC8641) += ddr-8641.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-y += interrupts.o
-COBJS-$(CONFIG_MP) += mp.o
-COBJS-y += speed.o
-COBJS-y += traps.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(ASOBJS) $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#include <config.h>
-#include <mpc86xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CACHE_LINE_SIZE
-# define CACHE_LINE_SIZE L1_CACHE_BYTES
-#endif
-
-#if CACHE_LINE_SIZE == 128
-#define LG_CACHE_LINE_SIZE 7
-#elif CACHE_LINE_SIZE == 32
-#define LG_CACHE_LINE_SIZE 5
-#elif CACHE_LINE_SIZE == 16
-#define LG_CACHE_LINE_SIZE 4
-#elif CACHE_LINE_SIZE == 8
-#define LG_CACHE_LINE_SIZE 3
-#else
-# error "Invalid cache line size!"
-#endif
-
-/*
- * Most of this code is taken from 74xx_7xx/cache.S
- * and then cleaned up a bit
- */
-
-/*
- * Invalidate L1 instruction cache.
- */
-_GLOBAL(invalidate_l1_instruction_cache)
- /* use invalidate-all bit in HID0 */
- mfspr r3,HID0
- ori r3,r3,HID0_ICFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Invalidate L1 data cache.
- */
-_GLOBAL(invalidate_l1_data_cache)
- mfspr r3,HID0
- ori r3,r3,HID0_DCFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Flush data cache.
- */
-_GLOBAL(flush_dcache)
- lis r3,0
- lis r5,CACHE_LINE_SIZE
-flush:
- cmp 0,1,r3,r5
- bge done
- lwz r5,0(r3)
- lis r5,CACHE_LINE_SIZE
- addi r3,r3,0x4
- b flush
-done:
- blr
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5 /* align r3 down to cache line */
- subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
- add r4,r4,r5 /* r4 += cache_line_size-1 */
- srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
- beqlr /* if r4 == 0 return */
- mtctr r4 /* ctr = r4 */
-
- sync
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbf 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbf's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_page_to_ram(void *page)
- */
-_GLOBAL(__flush_page_to_ram)
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Flush a particular page from the instruction cache.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_icache_page(void *page)
- */
-_GLOBAL(__flush_icache_page)
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
-1: icbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Clear a page using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- */
-_GLOBAL(clear_page)
- li r0,4096/CACHE_LINE_SIZE
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- blr
-
-/*
- * Enable L1 Instruction cache
- */
-_GLOBAL(icache_enable)
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Disable L1 Instruction cache
- */
-_GLOBAL(icache_disable)
- mflr r4
- bl invalidate_l1_instruction_cache /* uses r3 */
- sync
- mtlr r4
- mfspr r3, HID0
- li r5, 0
- ori r5, r5, HID0_ICE
- andc r3, r3, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Is instruction cache enabled?
- */
-_GLOBAL(icache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_ICE
- blr
-
-
-_GLOBAL(l1dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
-/*
- * Enable data cache(s) - L1 and optionally L2
- * Calls l2cache_enable. LR saved in r5
- */
-_GLOBAL(dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- mflr r5
- bl l2cache_enable /* uses r3 and r4 */
- sync
- mtlr r5
-#endif
- blr
-
-
-/*
- * Disable data cache(s) - L1 and optionally L2
- * Calls flush_dcache and l2cache_disable_no_flush.
- * LR saved in r4
- */
-_GLOBAL(dcache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- li r5, HID0_DCE|HID0_DCFI
- andc r3, r3, r5 /* no enable, no invalidate */
- mtspr HID0, r3
- sync
-#ifdef CONFIG_SYS_L2
- bl l2cache_disable_no_flush /* uses r3 */
-#endif
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Is data cache enabled?
- */
-_GLOBAL(dcache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_DCE
- blr
-
-/*
- * Invalidate L2 cache using L2I, assume L2 is enabled
- */
-_GLOBAL(l2cache_invalidate)
- mfspr r3, l2cr
- rlwinm. r3, r3, 0, 0, 0
- beq 1f
-
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 1, 31
-
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr l2cr, r3
- sync
-1: mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- mtspr l2cr, r3
-
-invl2:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne invl2
- blr
-
-/*
- * Enable L2 cache
- * Calls l2cache_invalidate. LR is saved in r4
- */
-_GLOBAL(l2cache_enable)
- mflr r4 /* save link register */
- bl l2cache_invalidate /* uses r3 */
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Disable L2 cache
- * Calls flush_dcache. LR is saved in r4
- */
-_GLOBAL(l2cache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mtlr r4 /* restore link register */
-l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- isync
- blr
+++ /dev/null
-#
-# (C) Copyright 2004 Freescale Semiconductor.
-# Jeff Brown
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -mstring
-PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
+++ /dev/null
-/*
- * Copyright 2006,2009-2010 Freescale Semiconductor, Inc.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <mpc86xx.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Default board reset function
- */
-static void
-__board_reset(void)
-{
- /* Do nothing */
-}
-void board_reset(void) __attribute__((weak, alias("__board_reset")));
-
-
-int
-checkcpu(void)
-{
- sys_info_t sysinfo;
- uint pvr, svr;
- uint ver;
- uint major, minor;
- char buf1[32], buf2[32];
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- struct cpu_type *cpu;
- uint msscr0 = mfspr(MSSCR0);
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
- major = SVR_MAJ(svr);
- minor = SVR_MIN(svr);
-
- if (cpu_numcores() > 1) {
-#ifndef CONFIG_MP
- puts("Unicore software on multiprocessor system!!\n"
- "To enable mutlticore build define CONFIG_MP\n");
-#endif
- }
- puts("CPU: ");
-
- cpu = gd->cpu;
-
- puts(cpu->name);
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
- puts("Core: ");
-
- pvr = get_pvr();
- ver = PVR_E600_VER(pvr);
- major = PVR_E600_MAJ(pvr);
- minor = PVR_E600_MIN(pvr);
-
- printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
- if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
- puts("\n Core1Translation Enabled");
- debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
-
- get_sys_info(&sysinfo);
-
- puts("Clock Configuration:\n");
- printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
- printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
- printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqSystemBus / 2),
- strmhz(buf2, sysinfo.freqSystemBus));
-
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
- } else {
- printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
- }
-
- puts("L1: D-cache 32 KB enabled\n");
- puts(" I-cache 32 KB enabled\n");
-
- puts("L2: ");
- if (get_l2cr() & 0x80000000) {
-#if defined(CONFIG_MPC8610)
- puts("256");
-#elif defined(CONFIG_MPC8641)
- puts("512");
-#endif
- puts(" KB enabled\n");
- } else {
- puts("Disabled\n");
- }
-
- return 0;
-}
-
-
-void
-do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
-
- /* Attempt board-specific reset */
- board_reset();
-
- /* Next try asserting HRESET_REQ */
- out_be32(&gur->rstcr, MPC86xx_RSTCR_HRST_REQ);
-
- while (1)
- ;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long
-get_tbclk(void)
-{
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- return (sys_info.freqSystemBus + 3L) / 4L;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
-{
-#if defined(CONFIG_MPC8610)
- /*
- * This actually feed the hard enabled watchdog.
- */
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_wdt_t *wdt = &immap->im_wdt;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- u32 tmp = gur->pordevsr;
-
- if (tmp & 0x4000) {
- wdt->swsrr = 0x556c;
- wdt->swsrr = 0xaa39;
- }
-#endif
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Print out the state of various machine registers.
- * Currently prints out LAWs, BR0/OR0, and BATs
- */
-void mpc86xx_reginfo(void)
-{
- immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- ccsr_lbc_t *lbc = &immap->im_lbc;
-
- print_bats();
- print_laws();
-
- printf ("Local Bus Controller Registers\n"
- "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
- printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
- printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
- printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
- printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
- printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
- printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
- printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
-
-}
-
-/*
- * Set the DDR BATs to reflect the actual size of DDR.
- *
- * dram_size is the actual size of DDR, in bytes
- *
- * Note: we assume that CONFIG_MAX_MEM_MAPPED is 2G or smaller as we only
- * are using a single BAT to cover DDR.
- *
- * If this is not true, (e.g. CONFIG_MAX_MEM_MAPPED is 2GB but HID0_XBSEN
- * is not defined) then we might have a situation where U-Boot will attempt
- * to relocated itself outside of the region mapped by DBAT0.
- * This will cause a machine check.
- *
- * Currently we are limited to power of two sized DDR since we only use a
- * single bat. If a non-power of two size is used that is less than
- * CONFIG_MAX_MEM_MAPPED u-boot will crash.
- *
- */
-void setup_ddr_bat(phys_addr_t dram_size)
-{
- unsigned long batu, bl;
-
- bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED));
-
- if (BATU_SIZE(bl) != dram_size) {
- u64 sz = (u64)dram_size - BATU_SIZE(bl);
- print_size(sz, " left unmapped\n");
- }
-
- batu = bl | BATU_VS | BATU_VP;
- write_bat(DBAT0, batu, CONFIG_SYS_DBAT0L);
- write_bat(IBAT0, batu, CONFIG_SYS_IBAT0L);
-}
+++ /dev/null
-/*
- * Copyright 2004,2009 Freescale Semiconductor, Inc.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu_init.c - low level cpu init
- */
-
-#include <config.h>
-#include <common.h>
-#include <mpc86xx.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include <asm/mp.h>
-
-void setup_bats(void);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map
- * initialize a bunch of registers
- */
-
-void cpu_init_f(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
-#ifdef CONFIG_FSL_LAW
- init_laws();
-#endif
-
- setup_bats();
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
- memctl->br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-#if defined(CONFIG_FSL_DMA)
- dma_init();
-#endif
-
- /* enable the timebase bit in HID0 */
- set_hid0(get_hid0() | 0x4000000);
-
- /* enable EMCP, SYNCBE | ABE bits in HID1 */
- set_hid1(get_hid1() | 0x80000C00);
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r(void)
-{
-#if defined(CONFIG_MP)
- setup_mp();
-#endif
- return 0;
-}
-
-/* Set up BAT registers */
-void setup_bats(void)
-{
-#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L)
- write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L);
-#endif
-#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
- write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L);
-#endif
- write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L);
- write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L);
- write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L);
- write_bat(IBAT2, CONFIG_SYS_IBAT2U, CONFIG_SYS_IBAT2L);
- write_bat(DBAT3, CONFIG_SYS_DBAT3U, CONFIG_SYS_DBAT3L);
- write_bat(IBAT3, CONFIG_SYS_IBAT3U, CONFIG_SYS_IBAT3L);
- write_bat(DBAT4, CONFIG_SYS_DBAT4U, CONFIG_SYS_DBAT4L);
- write_bat(IBAT4, CONFIG_SYS_IBAT4U, CONFIG_SYS_IBAT4L);
- write_bat(DBAT5, CONFIG_SYS_DBAT5U, CONFIG_SYS_DBAT5L);
- write_bat(IBAT5, CONFIG_SYS_IBAT5U, CONFIG_SYS_IBAT5L);
- write_bat(DBAT6, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
- write_bat(IBAT6, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
- write_bat(DBAT7, CONFIG_SYS_DBAT7U, CONFIG_SYS_DBAT7L);
- write_bat(IBAT7, CONFIG_SYS_IBAT7U, CONFIG_SYS_IBAT7L);
-
- return;
-}
-
-#ifdef CONFIG_ADDR_MAP
-/* Initialize address mapping array */
-void init_addr_map(void)
-{
- int i;
- ppc_bat_t bat = DBAT0;
- phys_size_t size;
- unsigned long upper, lower;
-
- for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++, bat++) {
- if (read_bat(bat, &upper, &lower) != -1) {
- if (!BATU_VALID(upper))
- size = 0;
- else
- size = BATU_SIZE(upper);
- addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
- size, i);
- }
-#ifdef CONFIG_HIGH_BATS
- /* High bats are not contiguous with low BAT numbers */
- if (bat == DBAT3)
- bat = DBAT4 - 1;
-#endif
- }
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr;
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
- break;
- case 1:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
- break;
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- debug("before go\n");
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /*
- * Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done
- */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/mp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void ft_fixup_num_cores(void *blob);
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_MP
- int off;
- u32 bootpg = determine_mp_bootpg();
-#endif
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
-#if defined(CONFIG_MPC8641)
- do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
- "bus-frequency", gd->lbc_clk, 1);
-#endif
- do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
- || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
- fdt_fixup_ethernet(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
-#ifdef CONFIG_MP
- /* Reserve the boot page so OSes dont use it */
- off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
- if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
-#endif
- ft_fixup_num_cores(blob);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * (C) Copyright 2004, 2007 Freescale Semiconductor. (MPC86xx Port)
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc86xx.h>
-#include <command.h>
-#include <asm/processor.h>
-
-int interrupt_init_cpu(unsigned long *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_pic_t *pic = &immr->im_pic;
-
- pic->gcr = MPC86xx_PICGCR_RST;
- while (pic->gcr & MPC86xx_PICGCR_RST)
- ;
- pic->gcr = MPC86xx_PICGCR_MODE;
-
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
- debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
- (get_tbclk() / 1000000),
- *decrementer_count);
-
-#ifdef CONFIG_INTERRUPTS
-
- pic->iivpr1 = 0x810001; /* 50220 enable mcm interrupts */
- debug("iivpr1@%x = %x\n", &pic->iivpr1, pic->iivpr1);
-
- pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
- debug("iivpr2@%x = %x\n", &pic->iivpr2, pic->iivpr2);
-
- pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
- debug("iivpr3@%x = %x\n", &pic->iivpr3, pic->iivpr3);
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCIE1)
- pic->iivpr8 = 0x810008; /* enable pcie1 interrupts */
- debug("iivpr8@%x = %x\n", &pic->iivpr8, pic->iivpr8);
-#endif
-#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
- pic->iivpr9 = 0x810009; /* enable pcie2 interrupts */
- debug("iivpr9@%x = %x\n", &pic->iivpr9, pic->iivpr9);
-#endif
-
- pic->ctpr = 0; /* 40080 clear current task priority register */
-#endif
-
- return 0;
-}
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
-}
-
-/*
- * Install and free a interrupt handler. Not implemented yet.
- */
-void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-}
-
-void irq_free_handler(int vec)
-{
-}
-
-/*
- * irqinfo - print information about PCI devices,not implemented.
- */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- return 0;
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- puts("external_interrupt (oops!)\n");
-}
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <ioports.h>
-#include <lmb.h>
-#include <asm/io.h>
-#include <asm/mp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int cpu_reset(int nr)
-{
- /* dummy function so common/cmd_mp.c will build
- * should be implemented in the future, when cpu_release()
- * is supported. Be aware there may be a similiar bug
- * as exists on MPC85xx w/its PIC having a timing window
- * associated to resetting the core */
- return 1;
-}
-
-int cpu_status(int nr)
-{
- /* dummy function so common/cmd_mp.c will build */
- return 0;
-}
-
-int cpu_disable(int nr)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
-
- switch (nr) {
- case 0:
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU0);
- break;
- case 1:
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU1);
- break;
- default:
- printf("Invalid cpu number for disable %d\n", nr);
- return 1;
- }
-
- return 0;
-}
-
-int cpu_release(int nr, int argc, char *argv[])
-{
- /* dummy function so common/cmd_mp.c will build
- * should be implemented in the future */
- return 1;
-}
-
-u32 determine_mp_bootpg(void)
-{
- /* if we have 4G or more of memory, put the boot page at 4Gb-1M */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfff00000);
-
- return (gd->ram_size - (1024 * 1024));
-}
-
-void cpu_mp_lmb_reserve(struct lmb *lmb)
-{
- u32 bootpg = determine_mp_bootpg();
-
- /* tell u-boot we stole a page */
- lmb_reserve(lmb, bootpg, 4096);
-}
-
-/*
- * Copy the code for other cpus to execute into an
- * aligned location accessible via BPTR
- */
-void setup_mp(void)
-{
- extern ulong __secondary_start_page;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
- u32 bootpg_va;
-
- if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
- /* We're not covered by the DDR mapping, set up BAT */
- write_bat(DBAT7, CONFIG_SYS_SCRATCH_VA | BATU_BL_128K |
- BATU_VS | BATU_VP,
- bootpg | BATL_PP_RW | BATL_MEMCOHERENCE);
- bootpg_va = CONFIG_SYS_SCRATCH_VA;
- } else {
- bootpg_va = bootpg;
- }
-
- memcpy((void *)bootpg_va, (void *)fixup, 4096);
- flush_cache(bootpg_va, 4096);
-
- /* remove the temporary BAT mapping */
- if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE)
- write_bat(DBAT7, 0, 0);
-
- /* If the physical location of bootpg is not at fff00000, set BPTR */
- if (bootpg != 0xfff00000)
- out_be32((uint *)(CONFIG_SYS_CCSRBAR + 0x20), 0x80000000 |
- (bootpg >> 12));
-}
+++ /dev/null
-/*
- * Copyright 2004, 2007, 2008 Freescale Semiconductor.
- * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-#include <mpc86xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/* If this is a multi-cpu system then we need to handle the
- * 2nd cpu. The assumption is that the 2nd cpu is being
- * held in boot holdoff mode until the 1st cpu unlocks it
- * from Linux. We'll do some basic cpu init and then pass
- * it to the Linux Reset Vector.
- * Sri: Much of this initialization is not required. Linux
- * rewrites the bats, and the sprs and also enables the L1 cache.
- *
- * Core 0 must copy this to a 1M aligned region and set BPTR
- * to point to it.
- */
- .align 12
-.globl __secondary_start_page
-__secondary_start_page:
- .space 0x100 /* space over to reset vector loc */
- mfspr r0, MSSCR0
- andi. r0, r0, 0x0020
- rlwinm r0,r0,27,31,31
- mtspr PIR, r0
-
- /* Invalidate BATs */
- li r0, 0
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
- isync
- sync
-
- /* enable extended addressing */
- mfspr r0, HID0
- lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
- ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
- mtspr HID0, r0
- sync
- isync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- /* invalidate the L2 cache */
- mfspr r3, l2cr
- rlwinm. r3, r3, 0, 0, 0
- beq 1f
-
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 1, 31
-
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr l2cr, r3
- sync
-1: mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- mtspr l2cr, r3
-
-invl2:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne invl2
- sync
-#endif
-
- /* enable and invalidate the data cache */
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- sync
-#endif
-
- /* enable and invalidate the instruction cache*/
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- sync
-
- /* TBEN in HID0 */
- mfspr r4, HID0
- oris r4, r4, 0x0400
- mtspr HID0, r4
- sync
- isync
-
- /* MCP|SYNCBE|ABE in HID1 */
- mfspr r4, HID1
- oris r4, r4, 0x8000
- ori r4, r4, 0x0C00
- mtspr HID1, r4
- sync
- isync
-
- lis r3, CONFIG_LINUX_RESET_VEC@h
- ori r3, r3, CONFIG_LINUX_RESET_VEC@l
- mtlr r3
- blr
-
- /* Never Returns, Running in Linux Now */
+++ /dev/null
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc86xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
-extern unsigned long get_board_sys_clk(unsigned long dummy);
-
-void get_sys_info(sys_info_t *sysInfo)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint plat_ratio, e600_ratio;
- uint lcrr_div;
-
- plat_ratio = (gur->porpllsr) & 0x0000003e;
- plat_ratio >>= 1;
-
- switch (plat_ratio) {
- case 0x0:
- sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
- break;
- case 0x02:
- case 0x03:
- case 0x04:
- case 0x05:
- case 0x06:
- case 0x08:
- case 0x09:
- case 0x0a:
- case 0x0c:
- case 0x10:
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
- break;
- default:
- sysInfo->freqSystemBus = 0;
- break;
- }
-
- e600_ratio = (gur->porpllsr) & 0x003f0000;
- e600_ratio >>= 16;
-
- switch (e600_ratio) {
- case 0x10:
- sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
- break;
- case 0x19:
- sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
- break;
- case 0x20:
- sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
- break;
- case 0x39:
- sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
- break;
- case 0x28:
- sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
- break;
- case 0x1d:
- sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
- break;
- default:
- sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
- break;
- }
-
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- {
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
- lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
- }
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
- } else {
- /* In case anyone cares what the unknown value is */
- sysInfo->freqLocalBus = lcrr_div;
- }
-}
-
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2)
- * (Approx. GCLK frequency in Hz)
- */
-
-int get_clocks(void)
-{
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqSystemBus;
- gd->lbc_clk = sys_info.freqLocalBus;
-
- /*
- * The base clock for I2C depends on the actual SOC. Unfortunately,
- * there is no pattern that can be used to determine the frequency, so
- * the only choice is to look up the actual SOC number and use the value
- * for that SOC. This information is taken from application note
- * AN2919.
- */
-#ifdef CONFIG_MPC8610
- gd->i2c1_clk = sys_info.freqSystemBus;
-#else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#endif
- gd->i2c2_clk = gd->i2c1_clk;
-
- if (gd->cpu_clk != 0)
- return 0;
- else
- return 1;
-}
-
-
-/*
- * get_bus_freq
- * Return system bus freq in Hz
- */
-
-ulong get_bus_freq(ulong dummy)
-{
- ulong val;
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- val = sys_info.freqSystemBus;
-
- return val;
-}
+++ /dev/null
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfff00100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- */
-#include <config.h>
-#include <mpc86xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/*
- * Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions
- */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
-
- /* the boot code is located below the exception table */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x2000
-
-boot_cold:
-boot_warm:
- /*
- * NOTE: Only Cpu 0 will ever come here. Other cores go to an
- * address specified by the BPTR
- */
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- /* disable everything */
- li r0, 0
- mtspr HID0, r0
- sync
- mtmsr 0
-#endif
-
- /* Invalidate BATs */
- bl invalidate_bats
- sync
- /* Invalidate all of TLB before MMU turn on */
- bl clear_tlbs
- sync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*------------------------------------------------------*/
- /* perform low-level init */
-
- /* enable extended addressing */
- bl enable_ext_addr
-
- /* setup the bats */
- bl early_bats
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- */
-
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- lis r3,addr_trans_enabled@h
- ori r3, r3, addr_trans_enabled@l
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r5
- rfi
-
-addr_trans_enabled:
- /* enable and invalidate the data cache */
-/* bl l1dcache_enable */
- bl dcache_enable
- sync
-
-#if 1
- bl icache_enable
-#endif
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
- bl setup_ccsrbar
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- /* run low-level CPU init code (from Flash) */
- bl cpu_init_f
- sync
-
-#ifdef RUN_DIAG
-
- /* Load PX_AUX register address in r4 */
- lis r4, PIXIS_BASE@h
- ori r4, r4, 0x6
- /* Load contents of PX_AUX in r3 bits 24 to 31*/
- lbz r3, 0(r4)
-
- /* Mask and obtain the bit in r3 */
- rlwinm. r3, r3, 0, 24, 24
- /* If not zero, jump and continue with u-boot */
- bne diag_done
-
- /* Load back contents of PX_AUX in r3 bits 24 to 31 */
- lbz r3, 0(r4)
- /* Set the MSB of the register value */
- ori r3, r3, 0x80
- /* Write value in r3 back to PX_AUX */
- stb r3, 0(r4)
-
- /* Get the address to jump to in r3*/
- lis r3, CONFIG_SYS_DIAG_ADDR@h
- ori r3, r3, CONFIG_SYS_DIAG_ADDR@l
-
- /* Load the LR with the branch address */
- mtlr r3
-
- /* Branch to diagnostic */
- blr
-
-diag_done:
-#endif
-
-/* bl l2cache_enable */
- mr r3, r21
-
- /* r3: BOOTFLAG */
- /* run 1st part of board init code (from Flash) */
- bl board_init_f
- sync
-
- /* NOTREACHED */
-
- .globl invalidate_bats
-invalidate_bats:
-
- li r0, 0
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-
- isync
- sync
- blr
-
-/*
- * early_bats:
- *
- * Set up bats needed early on - this is usually the BAT for the
- * stack-in-cache, the Flash, and CCSR space
- */
- .globl early_bats
-early_bats:
- /* IBAT 3 */
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- lis r4, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- lis r3, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
- /* IBAT 5 */
- lis r4, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- lis r3, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- lis r4, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- lis r3, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- lis r4, CONFIG_SYS_IBAT6L_EARLY@h
- ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
- lis r3, CONFIG_SYS_IBAT6U_EARLY@h
- ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- lis r4, CONFIG_SYS_DBAT6L_EARLY@h
- ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
- lis r3, CONFIG_SYS_DBAT6U_EARLY@h
- ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
-#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
- /* IBAT 7 */
- lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
- ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
- lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
- ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
- ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
- lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
- ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
- blr
-
- .globl clear_tlbs
-clear_tlbs:
- addis r3, 0, 0x0000
- addis r5, 0, 0x4
- isync
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt tlblp
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
- .globl dc_read
-dc_read:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3, SVR
- blr
-
-
-/*
- * Function: in8
- * Description: Input 8 bits
- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*
- * Function: out8
- * Description: Output 8 bits
- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*
- * Function: out16
- * Description: Output 16 bits
- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*
- * Function: out16r
- * Description: Byte reverse and output 16 bits
- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*
- * Function: out32
- * Description: Output 32 bits
- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*
- * Function: out32r
- * Description: Byte reverse and output 32 bits
- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*
- * Function: in16
- * Description: Input 16 bits
- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*
- * Function: in16r
- * Description: Input 16 bits and byte reverse
- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*
- * Function: in32
- * Description: Input 32 bits
- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/*
- * Function: in32r
- * Description: Input 32 bits and byte reverse
- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
-
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-/* clear_bss: */
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r9 /* Init Date pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /* not reached - end relocate_code */
-/*-----------------------------------------------------------------------*/
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- /* enable execptions from RAM vectors */
- mfmsr r7
- li r8,MSR_IP
- andc r7,r7,r8
- ori r7,r7,MSR_ME /* Enable Machine Check */
- mtmsr r7
-
- mtlr r4 /* restore link register */
- blr
-
-.globl enable_ext_addr
-enable_ext_addr:
- mfspr r0, HID0
- lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
- ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
- mtspr HID0, r0
- sync
- isync
- blr
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-.globl setup_ccsrbar
-setup_ccsrbar:
- /* Special sequence needed to update CCSRBAR itself */
- lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
- ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
-
- lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
- ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
- srwi r5,r5,12
- li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
- rlwimi r5,r6,20,8,11
- stw r5, 0(r4) /* Store physical value of CCSR */
- isync
-
- lis r5, TEXT_BASE@h
- ori r5,r5,TEXT_BASE@l
- lwz r5, 0(r5)
- isync
-
- /* Use VA of CCSR to do read */
- lis r3, CONFIG_SYS_CCSRBAR@h
- lwz r5, CONFIG_SYS_CCSRBAR@l(r3)
- isync
-
- blr
-#endif
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-#if 1
-/* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, 0x1000
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#if 0
- /* Lock the first way of the data cache */
- mfspr r0, LDSTCR
- ori r0, r0, 0x0080
-#if defined(CONFIG_ALTIVEC)
- dssall
-#endif
- sync
- mtspr LDSTCR, r0
- sync
- isync
- blr
-#endif
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-#if 1
-/* Unlock the data cache and invalidate it */
- mfspr r0, HID0
- li r3,0x1000
- andc r0,r0,r3
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#if 0
- /* Unlock the first way of the data cache */
- mfspr r0, LDSTCR
- li r3,0x0080
- andc r0,r0,r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr LDSTCR, r0
- sync
- isync
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#endif
+++ /dev/null
-/*
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint) sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32)
- break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void
-show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
- " %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP:"
- " %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr & MSR_EE ? 1 : 0,
- regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,
- regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0,
- regs->msr & MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
- switch ( regs->msr & 0x001F0000) {
- case (0x80000000>>11):
- printf("MSS error. MSSSR0: %08x\n", mfspr(SPRN_MSSSR0));
- break;
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000 >> 13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- printf("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
- int i, j;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
-
- p = (unsigned char *)((unsigned long)p & 0xFFFFFFE0);
- p -= 32;
- for (i = 0; i < 256; i += 16) {
- printf("%08x: ", (unsigned int)p + i);
- for (j = 0; j < 16; j++) {
- printf("%02x ", p[i + j]);
- }
- printf("\n");
- }
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- printf("UnknownException regs@%lx\n", (ulong)regs);
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/*
- * Probe an address by reading.
- * If not present, return -1,
- * otherwise return 0.
- */
-int
-addr_probe(uint *addr)
-{
- return 0;
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG
-
-LIB = $(obj)lib$(CPU).a
-
-START-y += start.o
-START-y += kgdb.o
-COBJS-y += bedbug_860.o
-COBJS-y += commproc.o
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-COBJS-y += fec.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-y += i2c.o
-COBJS-y += interrupts.o
-COBJS-y += lcd.o
-COBJS-y += scc.o
-COBJS-y += serial.o
-COBJS-y += speed.o
-COBJS-y += spi.o
-COBJS-y += traps.o
-COBJS-y += upatch.o
-COBJS-y += video.o
-SOBJS-y += plprcr_write.o
-
-SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START-y))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * Bedbug Functions specific to the MPC860 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-#include <bedbug/type.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
-
-#define MAX_BREAK_POINTS 2
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug860_init __P((void));
-void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*[]));
-void bedbug860_break_isr __P((struct pt_regs*));
-int bedbug860_find_empty __P((void));
-int bedbug860_set __P((int,unsigned long));
-int bedbug860_clear __P((int));
-
-\f
-/* ======================================================================
- * Initialize the global bug_ctx structure for the MPC860. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug860_init( void )
-{
- int i;
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug860_do_break;
- bug_ctx.break_isr = bedbug860_break_isr;
- bug_ctx.find_empty = bedbug860_find_empty;
- bug_ctx.set = bedbug860_set;
- bug_ctx.clear = bedbug860_clear;
-
- for( i = 1; i <= MAX_BREAK_POINTS; ++i )
- (*bug_ctx.clear)( i );
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-\f
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 860. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char *argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
- /* -------------------------------------------------- */
-
- if (argc < 2)
- {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if( strcmp( argv[ 1 ], "off" ) == 0 )
- {
- if( bug_ctx.hw_debug_enabled == 0 )
- {
- printf( "No breakpoints enabled\n" );
- return;
- }
-
- which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
- if( bug_ctx.clear )
- (*bug_ctx.clear)( which_bp );
-
- printf( "Breakpoint %d removed\n", which_bp );
- return;
- }
-
- /* Show a list of breakpoints */
-
- if( strcmp( argv[ 1 ], "show" ) == 0 )
- {
- for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
- {
-
- switch( which_bp )
- {
- case 1: addr = GET_CMPA(); break;
- case 2: addr = GET_CMPB(); break;
- case 3: addr = GET_CMPC(); break;
- case 4: addr = GET_CMPD(); break;
- }
-
- printf( "Breakpoint [%d]: ", which_bp );
- if( addr == 0 )
- printf( "NOT SET\n" );
- else
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if( !isdigit( argv[ 1 ][ 0 ]))
- {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
-
- if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
- {
- printf( "Breakpoint [%d]: ", which_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
-
- return;
-} /* bedbug860_do_break */
-
-
-\f
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug860_break_isr( struct pt_regs *regs )
-{
- unsigned long addr; /* Address stopped at */
- unsigned long cause; /* Address stopped at */
- /* -------------------------------------------------- */
-
- cause = GET_ICR();
-
- if( !(cause & 0x00000004)) {
- printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
- return;
- }
-
- addr = regs->nip;
-
- if( addr == GET_CMPA() )
- {
- bug_ctx.current_bp = 1;
- }
- else if( addr == GET_CMPB() )
- {
- bug_ctx.current_bp = 2;
- }
- else if( addr == GET_CMPC() )
- {
- bug_ctx.current_bp = 3;
- }
- else if( addr == GET_CMPD() )
- {
- bug_ctx.current_bp = 4;
- }
-
- bedbug_main_loop( addr, regs );
- return;
-} /* bedbug860_break_isr */
-
-
-\f
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug860_find_empty( void )
-{
- /* -------------------------------------------------- */
-
- if( GET_CMPA() == 0 )
- return 1;
-
- if( GET_CMPB() == 0 )
- return 2;
-
- if( GET_CMPC() == 0 )
- return 3;
-
- if( GET_CMPD() == 0 )
- return 4;
-
- return 0;
-} /* bedbug860_find_empty */
-
-
-\f
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_set( int which_bp, unsigned long addr )
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if(( bug_ctx.find_empty ) && ( !which_bp ) &&
- ( which_bp = (*bug_ctx.find_empty)()) == 0 )
- {
- printf( "All breakpoints in use\n" );
- return 0;
- }
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # %d\n", which_bp );
- return 0;
- }
-
- if( ! bug_ctx.hw_debug_enabled )
- {
- bug_ctx.hw_debug_enabled = 1;
- SET_DER( GET_DER() | 0x00000004 );
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( addr );
- SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( addr );
- SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( addr );
- SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( addr );
- SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return which_bp;
-} /* bedbug860_set */
-
-
-\f
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_clear( int which_bp )
-{
- /* -------------------------------------------------- */
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # (%d)\n", which_bp );
- return -1;
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return 0;
-} /* bedbug860_clear */
-
-
-/* ====================================================================== */
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-
-int dpram_init (void)
-{
- /* Reclaim the DP memory for our use. */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
-
- return (0);
-}
-
-/* Allocate some memory from the dual ported ram. We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc (uint size)
-{
- uint addr = gd->dp_alloc_base;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
- return (CPM_DP_NOSPACE);
-
- gd->dp_alloc_base += size;
-
- return addr;
-}
-
-uint dpram_base (void)
-{
- return gd->dp_alloc_base;
-}
-
-/* Allocate some memory from the dual ported ram. We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc_align (uint size, uint align)
-{
- uint addr, mask = align - 1;
-
- addr = (gd->dp_alloc_base + mask) & ~mask;
-
- if ((addr + size) >= gd->dp_alloc_top)
- return (CPM_DP_NOSPACE);
-
- gd->dp_alloc_base = addr + size;
-
- return addr;
-}
-
-uint dpram_base_align (uint align)
-{
- uint mask = align - 1;
-
- return (gd->dp_alloc_base + mask) & ~mask;
-}
-#endif /* CONFIG_SYS_ALLOC_DPRAM */
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- *(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- return *(volatile ulong *) save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
- CPM_BOOTCOUNT_ADDR );
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
- CPM_BOOTCOUNT_ADDR );
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * m8xx.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <netdev.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char *cpu_warning = "\n " \
- "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
-
-#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
- !defined(CONFIG_MPC862))
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- char *id_str =
-# if defined(CONFIG_MPC855)
- "PC855";
-# elif defined(CONFIG_MPC860P)
- "PC860P";
-# else
- NULL;
-# endif
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 860 */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
- suf = "";
-
- /*
- * Some boards use sockets so different CPUs can be used.
- * We have to check chip version in run time.
- */
- switch (k) {
- case 0x00020001: pre = 'P'; break;
- case 0x00030001: break;
- case 0x00120003: suf = "A"; break;
- case 0x00130003: suf = "A3"; break;
-
- case 0x00200004: suf = "B"; break;
-
- case 0x00300004: suf = "C"; break;
- case 0x00310004: suf = "C1"; m = 1; break;
-
- case 0x00200064: mid = "SR"; suf = "B"; break;
- case 0x00300065: mid = "SR"; suf = "C"; break;
- case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
- case 0x05010000: suf = "D3"; m = 1; break;
- case 0x05020000: suf = "D4"; m = 1; break;
- /* this value is not documented anywhere */
- case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
- /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
- case 0x08010004: /* Rev. A.0 */
- suf = "A";
- /* fall through */
- case 0x08000003: /* Rev. 0.3 */
- pre = 'M'; m = 1;
- if (id_str == NULL)
- id_str =
-# if defined(CONFIG_MPC852T)
- "PC852T";
-# elif defined(CONFIG_MPC859T)
- "PC859T";
-# elif defined(CONFIG_MPC859DSL)
- "PC859DSL";
-# elif defined(CONFIG_MPC866T)
- "PC866T";
-# else
- "PC866x"; /* Unknown chip from MPC866 family */
-# endif
- break;
- case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
- if (id_str == NULL)
- id_str = "PC885"; /* 870/875/880/885 */
- break;
-
- default: suf = NULL; break;
- }
-
- if (id_str == NULL)
- id_str = "PC86x"; /* Unknown 86x chip */
- if (suf)
- printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
- else
- printf ("unknown M%s (0x%08x)", id_str, k);
-
-
-#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
- printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
- strmhz (buf, clock),
- CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
- CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
- );
-#else
- printf (" at %s MHz: ", strmhz (buf, clock));
-#endif
- printf ("%u kB I-Cache %u kB D-Cache",
- checkicache () >> 10,
- checkdcache () >> 10
- );
-
- /* do we have a FEC (860T/P or 852/859/866/885)? */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
-#ifdef DEBUG
- if(clock != measure_gclk()) {
- printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
- }
-#endif
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC862)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
-
- /* this value is not documented anywhere */
- case 0x06000000: mid = "P"; suf = "0"; break;
- case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
- case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
- default: suf = NULL; break;
- }
-
-#ifndef CONFIG_MPC857
- if (suf)
- printf ("%cPC862%sZPnn%s", pre, mid, suf);
- else
- printf ("unknown MPC862 (0x%08x)", k);
-#else
- if (suf)
- printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
- else
- printf ("unknown MPC857 (0x%08x)", k);
-#endif
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 862T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC823)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
- /* MPC823 */
- case 0x20000000: suf = "0"; break;
- case 0x20010000: suf = "0.1"; break;
- case 0x20020000: suf = "Z2/3"; break;
- case 0x20020001: suf = "Z3"; break;
- case 0x21000000: suf = "A"; break;
- case 0x21010000: suf = "B"; m = 1; break;
- case 0x21010001: suf = "B2"; m = 1; break;
- /* MPC823E */
- case 0x24010000: suf = NULL;
- puts ("PPC823EZTnnB2");
- m = 1;
- break;
- default:
- suf = NULL;
- printf ("unknown MPC823 (0x%08x)", k);
- break;
- }
- if (suf)
- printf ("PPC823ZTnn%s", suf);
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 860T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- puts (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC850)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
- case 0x20020001:
- printf ("XPC850xxZT");
- break;
- case 0x21000065:
- printf ("XPC850xxZTA");
- break;
- case 0x21010067:
- printf ("XPC850xxZTB");
- m = 1;
- break;
- case 0x21020068:
- printf ("XPC850xxZTC");
- m = 1;
- break;
- default:
- printf ("unknown MPC850 (0x%08x)", k);
- }
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 850T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-#else
-#error CPU undefined
-#endif
-/* ------------------------------------------------------------------------- */
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- uint immr = get_immr (0); /* Return full IMMR contents */
- uint pvr = get_pvr ();
-
- puts ("CPU: ");
-
- /* 850 has PARTNUM 20 */
- /* 801 has PARTNUM 10 */
- return check_CPU (clock, pvr, immr);
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
-
-int checkicache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_ic_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
- wr_ic_cst (IDC_DISABLE);
- __asm__ volatile ("isync");
-
- while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
- wr_ic_adr (k);
- wr_ic_cst (IDC_LDLCK);
- __asm__ volatile ("isync");
-
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
-
- if (cacheon)
- wr_ic_cst (IDC_ENABLE);
- else
- wr_ic_cst (IDC_DISABLE);
-
- __asm__ volatile ("isync");
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
-/* call with cache disabled */
-
-int checkdcache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_dc_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
- wr_dc_cst (IDC_DISABLE);
-
- while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
- wr_dc_adr (k);
- wr_dc_cst (IDC_LDLCK);
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
-
- if (cacheon)
- wr_dc_cst (IDC_ENABLE);
- else
- wr_dc_cst (IDC_DISABLE);
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
- uint i;
- uint addr = 0;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- for (i = 0; i < size; i++) {
- memctl->memc_mdr = table[i]; /* (16-15) */
- memctl->memc_mcr = addr | upm; /* (16-16) */
- addr++;
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifndef CONFIG_LWMON
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ volatile ("mtspr 81, 0");
- __asm__ volatile ("mfmsr %0":"=r" (msr));
-
- msr &= ~0x1030;
- __asm__ volatile ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
- * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-}
-
-#else /* CONFIG_LWMON */
-
-/*
- * On the LWMON board, the MCLR reset input of the PIC's on the board
- * uses a 47K/1n RC combination which has a 47us time constant. The
- * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
- * and thus too short to reset the external hardware. So we use the
- * watchdog to reset the board.
- */
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- /* prevent triggering the watchdog */
- disable_interrupts ();
-
- /* make sure the watchdog is running */
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-
- /* wait for watchdog reset */
- while (1) {};
-
- /* NOTREACHED */
- return 1;
-}
-
-#endif /* CONFIG_LWMON */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- * See sections 14.2 and 14.6 of the User's Manual
- */
-unsigned long get_tbclk (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
- ulong oscclk, factor, pll;
-
- if (immap->im_clkrst.car_sccr & SCCR_TBS) {
- return (gd->cpu_clk / 16);
- }
-
- pll = immap->im_clkrst.car_plprcr;
-
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-
- /*
- * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
- * factor is calculated as follows:
- *
- * MFN
- * MFI + -------
- * MFD + 1
- * factor = -----------------
- * (PDF + 1) * 2^S
- *
- * For older chips, it's just MF field of PLPRCR plus one.
- */
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
- (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
- } else {
- factor = PLPRCR_val(MF)+1;
- }
-
- oscclk = gd->cpu_clk / factor;
-
- if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
- return (oscclk / 4);
- }
- return (oscclk / 16);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
-
-void reset_8xx_watchdog (volatile immap_t * immr)
-{
-# if defined(CONFIG_LWMON)
- /*
- * The LWMON board uses a MAX6301 Watchdog
- * with the trigger pin connected to port PA.7
- *
- * (The old board version used a MAX706TESA Watchdog, which
- * had to be handled exactly the same.)
- */
-# define WATCHDOG_BIT 0x0100
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
- /*
- * The KUP4 boards uses a TPS3705 Watchdog
- * with the trigger pin connected to port PA.5
- */
-# define WATCHDOG_BIT 0x0400
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# else
- /*
- * All other boards use the MPC8xx Internal Watchdog
- */
- immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
- immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
-# endif /* CONFIG_LWMON */
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
- scc_initialize(bis);
-#endif
-#if defined(FEC_ENET)
- fec_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-void cpm_load_patch (volatile immap_t * immr);
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-#ifndef CONFIG_MBX
- volatile memctl8xx_t *memctl = &immr->im_memctl;
-# ifdef CONFIG_SYS_PLPRCR
- ulong mfmask;
-# endif
-#endif
- ulong reg;
-
- /* SYPCR - contains watchdog control (11-9) */
-
- immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
- reset_8xx_watchdog (immr);
-#endif /* CONFIG_WATCHDOG */
-
- /* SIUMCR - contains debug pin configuration (11-6) */
-#ifndef CONFIG_SVM_SC8xx
- immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-#else
- immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
- /* initialize timebase status and control register (11-26) */
- /* unlock TBSCRK */
-
- immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
- immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
- /* initialize the PIT (11-31) */
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /* System integration timers. Don't change EBDF! (15-27) */
-
- immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
- reg = immr->im_clkrst.car_sccr;
- reg &= SCCR_MASK;
- reg |= CONFIG_SYS_SCCR;
- immr->im_clkrst.car_sccr = reg;
-
- /* PLL (CPU clock) settings (15-30) */
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
-#ifndef CONFIG_MBX /* MBX board does things different */
-
- /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
- * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
- * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
- * field value.
- *
- * For newer (starting MPC866) chips PLPRCR layout is different.
- */
-#ifdef CONFIG_SYS_PLPRCR
- if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
- mfmask = PLPRCR_MFACT_MSK;
- else
- mfmask = PLPRCR_MF_MSK;
-
- if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
- reg = CONFIG_SYS_PLPRCR; /* reset control bits */
- else {
- reg = immr->im_clkrst.car_plprcr;
- reg &= mfmask; /* isolate MF-related fields */
- reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
- }
- immr->im_clkrst.car_plprcr = reg;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* perform BR0 reset that MPC850 Rev. A can't guarantee */
- reg = memctl->memc_br0;
- reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
- reg |= BR_V; /* then add just the "Bank Valid" bit */
- memctl->memc_br0 = reg;
-
- /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
- * preliminary addresses - these have to be modified later
- * when FLASH size has been determined
- *
- * Depending on the size of the memory region defined by
- * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
- * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
- * map CONFIG_SYS_MONITOR_BASE.
- *
- * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
- * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
- *
- * If BR0 wasn't loaded with address base 0xff000000, then BR0's
- * base address remains as 0x00000000. However, the address mask
- * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
- * into the Bank0.
- *
- * This is why CONFIG_IVMS8 and similar boards must load BR0 with
- * CONFIG_SYS_BR0_PRELIM in advance.
- *
- * [Thanks to Michael Liao for this explanation.
- * I owe him a free beer. - wd]
- */
-
-#if defined(CONFIG_GTH) || \
- defined(CONFIG_HERMES) || \
- defined(CONFIG_ICU862) || \
- defined(CONFIG_IP860) || \
- defined(CONFIG_IVML24) || \
- defined(CONFIG_IVMS8) || \
- defined(CONFIG_LWMON) || \
- defined(CONFIG_MHPC) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_R360MPI) || \
- defined(CONFIG_RMU) || \
- defined(CONFIG_RPXCLASSIC) || \
- defined(CONFIG_RPXLITE) || \
- defined(CONFIG_SPC1920) || \
- defined(CONFIG_SPD823TS)
-
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR5_REMAP)
- memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
- memctl->memc_br0 = 0;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#endif /* ! CONFIG_MBX */
-
- /*
- * Reset CPM
- */
- immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_MBX
- /*
- * on the MBX, things are a little bit different:
- * - we need to read the VPD to get board information
- * - the plprcr is set up dynamically
- * - the memory controller is set up dynamically
- */
- mbx_init ();
-#endif /* CONFIG_MBX */
-
-#ifdef CONFIG_RPXCLASSIC
- rpxclassic_init ();
-#endif
-
-#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
- rpxlite_init ();
-#endif
-
-#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
- /* write config value */
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
- cpm_load_patch (immr); /* load mpc8xx microcode patch */
-#endif
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
-#endif
-
-#ifdef CONFIG_SYS_RTCSC
- /* Unlock RTSC register */
- immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
- /* write config value */
- immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
-#endif
-
-#ifdef CONFIG_SYS_RMDS
- /* write config value */
- immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
-#endif
- return (0);
-}
+++ /dev/null
-/*
- * Copyright 2008 (C) Bryan O'Donoghue
- *
- * Code copied & edited from Freescale mpc85xx stuff.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
- gd->brg_clk, 1);
-
- /* Fixup ethernet MAC addresses */
- fdt_fixup_ethernet(blob);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef ET_DEBUG
-
-#if defined(CONFIG_CMD_NET) && \
- (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
-
-/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
-#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_ETHER_ON_FEC1 1
-#endif
-
-/* define WANT_MII when MII support is required */
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
-#define WANT_MII
-#else
-#undef WANT_MII
-#endif
-
-#if defined(WANT_MII)
-#include <miiphy.h>
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#endif
-
-#if defined(CONFIG_RMII) && !defined(WANT_MII)
-#error RMII support is unusable without a working PHY.
-#endif
-
-#ifdef CONFIG_SYS_DISCOVER_PHY
-static int mii_discover_phy(struct eth_device *dev);
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int fecp_offset;
- int phy_addr;
- int actual_phy_addr;
- int initialized;
-}
- ether_fcc_info[] = {
-#if defined(CONFIG_ETHER_ON_FEC1)
- {
- 0,
- offsetof(immap_t, im_cpm.cp_fec1),
-#if defined(CONFIG_FEC1_PHY)
- CONFIG_FEC1_PHY,
-#else
- -1, /* discover */
-#endif
- -1,
- 0,
-
- },
-#endif
-#if defined(CONFIG_ETHER_ON_FEC2)
- {
- 1,
- offsetof(immap_t, im_cpm.cp_fec2),
-#if defined(CONFIG_FEC2_PHY)
- CONFIG_FEC2_PHY,
-#else
- -1,
-#endif
- -1,
- 0,
- },
-#endif
-};
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-#ifdef __GNUC__
-static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
-#else
-#error txbuf must be aligned.
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = NULL;
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length);
-static int fec_recv(struct eth_device* dev);
-static int fec_init(struct eth_device* dev, bd_t * bd);
-static void fec_halt(struct eth_device* dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static void __mii_init(void);
-#endif
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- struct ether_fcc_info_s *efis;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) {
-
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- hang();
-
- memset(dev, 0, sizeof(*dev));
-
- /* for FEC1 make sure that the name of the interface is the same
- as the old one for compatibility reasons */
- if (i == 0) {
- sprintf (dev->name, "FEC ETHERNET");
- } else {
- sprintf (dev->name, "FEC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- }
-
- efis = ðer_fcc_info[i];
-
- /*
- * reset actual phy addr
- */
- efis->actual_phy_addr = -1;
-
- dev->priv = efis;
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register(dev->name,
- fec8xx_miiphy_read, fec8xx_miiphy_write);
-#endif
- }
- return 1;
-}
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int j, rc;
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX not ready\n");
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
- __asm__ ("eieio");
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
-
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-#if defined(CONFIG_ICU862)
- udelay(10);
-#else
- udelay(1);
-#endif
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX timeout\n");
- }
-#ifdef ET_DEBUG
- printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
-#endif
- /* return only status bits */;
- rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-static int fec_recv (struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- volatile uchar *rx = NetRxPackets[rxIdx];
-
- length -= 4;
-
-#if defined(CONFIG_CMD_CDP)
- if ((rx[0] & 1) != 0
- && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
- && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
- rx = NULL;
-#endif
- /*
- * Pass the packet up to the protocol layers.
- */
- if (rx != NULL)
- NetReceive (rx, length);
- }
-
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- __asm__ ("eieio");
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50
-
-#if defined(CONFIG_RMII)
-
-static inline void fec_10Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask;
-}
-
-static inline void fec_100Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
-}
-
-#endif
-
-static inline void fec_full_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
-}
-
-static inline void fec_half_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
-}
-
-static void fec_pin_init(int fecidx)
-{
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp;
-
- /*
- * only two FECs please
- */
- if ((unsigned int)fecidx >= 2)
- hang();
-
- if (fecidx == 0)
- fecp = &immr->im_cpm.cp_fec1;
- else
- fecp = &immr->im_cpm.cp_fec2;
-
- /*
- * Set MII speed to 2.5 MHz or slightly below.
- * * According to the MPC860T (Rev. D) Fast ethernet controller user
- * * manual (6.2.14),
- * * the MII management interface clock must be less than or equal
- * * to 2.5 MHz.
- * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
- * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
- *
- * All MII configuration is done via FEC1 registers:
- */
- immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
- /* our PHYs are the limit at 2.5 MHz */
- fecp->fec_mii_speed <<= 1;
-#endif
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
- /* use MDC for MII */
- immr->im_ioport.iop_pdpar |= 0x0080;
- immr->im_ioport.iop_pddir &= ~0x0080;
-#endif
-
- if (fecidx == 0) {
-#if defined(CONFIG_ETHER_ON_FEC1)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-
- immr->im_ioport.iop_papar |= 0xf830;
- immr->im_ioport.iop_padir |= 0x0830;
- immr->im_ioport.iop_padir &= ~0xf000;
-
- immr->im_cpm.cp_pbpar |= 0x00001001;
- immr->im_cpm.cp_pbdir &= ~0x00001001;
-
- immr->im_ioport.iop_pcpar |= 0x000c;
- immr->im_ioport.iop_pcdir &= ~0x000c;
-
- immr->im_cpm.cp_pepar |= 0x00000003;
- immr->im_cpm.cp_pedir |= 0x00000003;
- immr->im_cpm.cp_peso &= ~0x00000003;
-
- immr->im_cpm.cp_cptr &= ~0x00000100;
-
-#else
-
-#if !defined(CONFIG_FEC1_PHY_NORXERR)
- immr->im_ioport.iop_papar |= 0x1000;
- immr->im_ioport.iop_padir &= ~0x1000;
-#endif
- immr->im_ioport.iop_papar |= 0xe810;
- immr->im_ioport.iop_padir |= 0x0810;
- immr->im_ioport.iop_padir &= ~0xe000;
-
- immr->im_cpm.cp_pbpar |= 0x00000001;
- immr->im_cpm.cp_pbdir &= ~0x00000001;
-
- immr->im_cpm.cp_cptr |= 0x00000100;
- immr->im_cpm.cp_cptr &= ~0x00000050;
-
-#endif /* !CONFIG_RMII */
-
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
- /*
- * Configure all of port D for MII.
- */
- immr->im_ioport.iop_pdpar = 0x1fff;
-
- /*
- * Bits moved from Rev. D onward
- */
- if ((get_immr(0) & 0xffff) < 0x0501)
- immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-#else
- /*
- * Configure port A for MII.
- */
-
-#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
-
- /*
- * On the ICU862 board the MII-MDC pin is routed to PD8 pin
- * * of CPU, so for this board we need to configure Utopia and
- * * enable PD8 to MII-MDC function
- */
- immr->im_ioport.iop_pdpar |= 0x4080;
-#endif
-
- /*
- * Has Utopia been configured?
- */
- if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
- /*
- * YES - Use MUXED mode for UTOPIA bus.
- * This frees Port A for use by MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode &= ~0x80;
- } else {
- /*
- * NO - set SPLIT mode for UTOPIA bus.
- *
- * This doesn't really effect UTOPIA (which isn't
- * enabled anyway) but just tells the 862
- * to use port A for MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode |= 0x80;
- }
-#endif /* !defined(CONFIG_ICU862) */
-
-#endif /* CONFIG_ETHER_ON_FEC1 */
- } else if (fecidx == 1) {
-
-#if defined(CONFIG_ETHER_ON_FEC2)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
- immr->im_cpm.cp_pepar |= 0x0003fffc;
- immr->im_cpm.cp_pedir |= 0x0003fffc;
- immr->im_cpm.cp_peso &= ~0x000087fc;
- immr->im_cpm.cp_peso |= 0x00037800;
-
- immr->im_cpm.cp_cptr &= ~0x00000080;
-#else
-
-#if !defined(CONFIG_FEC2_PHY_NORXERR)
- immr->im_cpm.cp_pepar |= 0x00000010;
- immr->im_cpm.cp_pedir |= 0x00000010;
- immr->im_cpm.cp_peso &= ~0x00000010;
-#endif
- immr->im_cpm.cp_pepar |= 0x00039620;
- immr->im_cpm.cp_pedir |= 0x00039620;
- immr->im_cpm.cp_peso |= 0x00031000;
- immr->im_cpm.cp_peso &= ~0x00008620;
-
- immr->im_cpm.cp_cptr |= 0x00000080;
- immr->im_cpm.cp_cptr &= ~0x00000028;
-#endif /* CONFIG_RMII */
-
-#endif /* CONFIG_MPC885_FAMILY */
-
-#endif /* CONFIG_ETHER_ON_FEC2 */
-
- }
-}
-
-static int fec_reset(volatile fec_t *fecp)
-{
- int i;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY)
- return -1;
-
- return 0;
-}
-
-static int fec_init (struct eth_device *dev, bd_t * bd)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- if (efis->ether_index == 0) {
-#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
-#if defined(CONFIG_MPC885ADS)
- *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
-#else
- /* configure FADS for fast (FEC) ethernet, half-duplex */
- /* The LXT970 needs about 50ms to recover from reset, so
- * wait for it by discovering the PHY before leaving eth_init().
- */
- {
- volatile uint *bcsr4 = (volatile uint *) BCSR4;
-
- *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
- | (BCSR4_FETHCFG0 | BCSR4_FETHFDE |
- BCSR4_FETHRST);
-
- /* reset the LXT970 PHY */
- *bcsr4 &= ~BCSR4_FETHRST;
- udelay (10);
- *bcsr4 |= BCSR4_FETHRST;
- udelay (10);
- }
-#endif /* CONFIG_MPC885ADS */
-#endif /* CONFIG_FADS */
- }
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- /* the MII interface is connected to FEC1
- * so for the miiphy_xxx function to work we must
- * call mii_init since fec_halt messes the thing up
- */
- if (efis->ether_index != 0)
- __mii_init();
-#endif
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* No need to set the IVEC register */
-
- /* Set station address
- */
-#define ea dev->enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
-#undef ea
-
-#if defined(CONFIG_CMD_CDP)
- /*
- * Turn on multicast address hash table
- */
- fecp->fec_hash_table_high = 0xffffffff;
- fecp->fec_hash_table_low = 0xffffffff;
-#else
- /* Clear multicast address hash table
- */
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-#endif
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
- /* Set maximum frame length
- */
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
- /*
- * Setup Buffers and Buffer Desriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
- dpram_alloc_align (sizeof (RTXBD), 8));
-#else
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
-#endif
- }
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* Set receive and transmit descriptor base
- */
- fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
- fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
- /* Enable MII mode
- */
-#if 0 /* Full duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
- fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else /* Half duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl = 0;
-#endif
-
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-
- /*
- * Setup the pin configuration of the FEC
- */
- fec_pin_init (efis->ether_index);
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-
- if (efis->phy_addr == -1) {
-#ifdef CONFIG_SYS_DISCOVER_PHY
- /*
- * wait for the PHY to wake up after reset
- */
- efis->actual_phy_addr = mii_discover_phy (dev);
-
- if (efis->actual_phy_addr == -1) {
- printf ("Unable to discover phy!\n");
- return -1;
- }
-#else
- efis->actual_phy_addr = -1;
-#endif
- } else {
- efis->actual_phy_addr = efis->phy_addr;
- }
-
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
- /*
- * adapt the RMII speed to the speed of the phy
- */
- if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
- fec_100Mbps (dev);
- } else {
- fec_10Mbps (dev);
- }
-#endif
-
-#if defined(CONFIG_MII)
- /*
- * adapt to the half/full speed settings
- */
- if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
- fec_full_duplex (dev);
- } else {
- fec_half_duplex (dev);
- }
-#endif
-
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
-
- efis->initialized = 1;
-
- return 0;
-}
-
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- /* avoid halt if initialized; mii gets stuck otherwise */
- if (!efis->initialized)
- return;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return;
- }
-
- efis->initialized = 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/* PHY identification
- */
-#define PHY_ID_LXT970 0x78100000 /* LXT970 */
-#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
-#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
-#define PHY_ID_QS6612 0x01814400 /* QS6612 */
-#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
-#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
-#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
-#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
-
-/* send command to phy using mii, wait for result */
-static uint
-mii_send(uint mii_cmd)
-{
- uint mii_reply;
- volatile fec_t *ep;
- int cnt;
-
- ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
-
- ep->fec_mii_data = mii_cmd; /* command to phy */
-
- /* wait for mii complete */
- cnt = 0;
- while (!(ep->fec_ievent & FEC_ENET_MII)) {
- if (++cnt > 1000) {
- printf("mii_send STUCK!\n");
- break;
- }
- }
- mii_reply = ep->fec_mii_data; /* result from phy */
- ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
-#if 0
- printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
- __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
-#endif
- return (mii_reply & 0xffff); /* data read from phy */
-}
-#endif
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-static int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
- uint phyno;
- int pass;
- uint phytype;
- int phyaddr;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay(10000); /* wait 10ms */
- }
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-#ifdef ET_DEBUG
- printf("PHY type 0x%x pass %d type ", phytype, pass);
-#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype |= mii_send(mk_mii_read(phyno,
- PHY_PHYIDR1)) << 16;
-
-#ifdef ET_DEBUG
- printf("PHY @ 0x%x pass %d type ",phyno,pass);
- switch (phytype & 0xfffffff0) {
- case PHY_ID_LXT970:
- printf("LXT970\n");
- break;
- case PHY_ID_LXT971:
- printf("LXT971\n");
- break;
- case PHY_ID_82555:
- printf("82555\n");
- break;
- case PHY_ID_QS6612:
- printf("QS6612\n");
- break;
- case PHY_ID_AMD79C784:
- printf("AMD79C784\n");
- break;
- case PHY_ID_LSI80225B:
- printf("LSI L80225/B\n");
- break;
- case PHY_ID_DM9161:
- printf("Davicom DM9161\n");
- break;
- case PHY_ID_KSM8995M:
- printf("MICREL KS8995M\n");
- break;
- default:
- printf("0x%08x\n", phytype);
- break;
- }
-#endif
- }
- }
- }
- if (phyaddr < 0) {
- printf("No PHY device found.\n");
- }
- return phyaddr;
-}
-#endif /* CONFIG_SYS_DISCOVER_PHY */
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
-
-/****************************************************************************
- * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-static void __mii_init(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-}
-
-void mii_init (void)
-{
- int i;
-
- __mii_init();
-
- /* Setup the pin configuration of the FEC(s)
- */
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- fec_pin_init(ether_fcc_info[i].ether_index);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_read(addr, reg));
-
- *value = rdreg;
-#ifdef MII_DEBUG
- printf ("0x%04x\n", *value);
-#endif
- return 0;
-}
-
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- short rdreg; /* register working value */
-#ifdef MII_DEBUG
- printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
- printf ("0x%04x\n", value);
-#endif
- return 0;
-}
-#endif
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FEC_H_
-#define _FEC_H_
-
-
-#endif /* _FEC_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Back ported to the 8xx platform (from the 8260 platform) by
- * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <commproc.h>
-#include <i2c.h>
-#ifdef CONFIG_LWMON
-#include <watchdog.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* define to enable debug messages */
-#undef DEBUG_I2C
-
-/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
-#define TOUT_LOOP 1000000
-
-#define NUM_RX_BDS 4
-#define NUM_TX_BDS 4
-#define MAX_TX_SPACE 256
-#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-
-typedef struct I2C_BD
-{
- unsigned short status;
- unsigned short length;
- unsigned char *addr;
-} I2C_BD;
-#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
-
-#define BD_I2C_TX_CL 0x0001 /* collision error */
-#define BD_I2C_TX_UN 0x0002 /* underflow error */
-#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
-#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
-
-#define BD_I2C_RX_ERR BD_SC_OV
-
-typedef void (*i2c_ecb_t)(int, int); /* error callback function */
-
-/* This structure keeps track of the bd and buffer space usage. */
-typedef struct i2c_state {
- int rx_idx; /* index to next free Rx BD */
- int tx_idx; /* index to next free Tx BD */
- void *rxbd; /* pointer to next free Rx BD */
- void *txbd; /* pointer to next free Tx BD */
- int tx_space; /* number of Tx bytes left */
- unsigned char *tx_buf; /* pointer to free Tx area */
- i2c_ecb_t err_cb; /* error callback function */
-} i2c_state_t;
-
-
-/* flags for i2c_send() and i2c_receive() */
-#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
-#define I2CF_START_COND 0x02 /* tx: generate start condition */
-#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
-
-/* return codes */
-#define I2CERR_NO_BUFFERS 0x01 /* no more BDs or buffer space */
-#define I2CERR_MSG_TOO_LONG 0x02 /* tried to send/receive to much data */
-#define I2CERR_TIMEOUT 0x03 /* timeout in i2c_doio() */
-#define I2CERR_QUEUE_EMPTY 0x04 /* i2c_doio called without send/receive */
-
-/* error callback flags */
-#define I2CECB_RX_ERR 0x10 /* this is a receive error */
-#define I2CECB_RX_ERR_OV 0x02 /* receive overrun error */
-#define I2CECB_RX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
-#define I2CECB_TX_CL 0x01 /* transmit collision error */
-#define I2CECB_TX_UN 0x02 /* transmit underflow error */
-#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
-#define I2CECB_TX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-/*
- * Returns the best value of I2BRG to meet desired clock speed of I2C with
- * input parameters (clock speed, filter, and predivider value).
- * It returns computer speed value and the difference between it and desired
- * speed.
- */
-static inline int
-i2c_roundrate(int hz, int speed, int filter, int modval,
- int *brgval, int *totspeed)
-{
- int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
-
- PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
- hz, speed, filter, modval));
-
- div = moddiv * speed;
- brgdiv = (hz + div - 1) / div;
-
- PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
-
- *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
-
- if ((*brgval < 0) || (*brgval > 255)) {
- PRINTD(("\t\trejected brgval=%d\n", *brgval));
- return -1;
- }
-
- brgdiv = 2 * (*brgval + 3 + (2 * filter));
- div = moddiv * brgdiv ;
- *totspeed = hz / div;
-
- PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
-
- return 0;
-}
-
-/*
- * Sets the I2C clock predivider and divider to meet required clock speed.
- */
-static int
-i2c_setrate (int hz, int speed)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
- int brgval,
- modval, /* 0-3 */
- bestspeed_diff = speed,
- bestspeed_brgval = 0,
- bestspeed_modval = 0,
- bestspeed_filter = 0,
- totspeed,
- filter = 0; /* Use this fixed value */
-
- for (modval = 0; modval < 4; modval++) {
- if (i2c_roundrate(hz,speed,filter,modval,&brgval,&totspeed) == 0) {
- int diff = speed - totspeed;
-
- if ((diff >= 0) && (diff < bestspeed_diff)) {
- bestspeed_diff = diff;
- bestspeed_modval = modval;
- bestspeed_brgval = brgval;
- bestspeed_filter = filter;
- }
- }
- }
-
- PRINTD (("[I2C] Best is:\n"));
- PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
- hz,
- speed,
- bestspeed_filter,
- bestspeed_modval,
- bestspeed_brgval,
- bestspeed_diff));
-
- i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
- i2c->i2c_i2brg = bestspeed_brgval & 0xff;
-
- PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
- i2c->i2c_i2brg));
-
- return 1;
-}
-
-void
-i2c_init(int speed, int slaveaddr)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
- ulong rbase, tbase;
- volatile I2C_BD *rxbd, *txbd;
- uint dpaddr;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#else
- /* Disable relocation */
- iip->iic_rpbase = 0;
-#endif
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = iip->iic_rbase;
- if (dpaddr == 0) {
- /* need to allocate dual port ram */
- dpaddr = dpram_alloc_align(
- (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
- MAX_TX_SPACE, 8);
- }
-#else
- dpaddr = CPM_I2C_BASE;
-#endif
-
- /*
- * initialise data in dual port ram:
- *
- * dpaddr->rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
- * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
- * tx buffer (MAX_TX_SPACE bytes)
- */
-
- rbase = dpaddr;
- tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
-
- /* Initialize Port B I2C pins. */
- cp->cp_pbpar |= 0x00000030;
- cp->cp_pbdir |= 0x00000030;
- cp->cp_pbodr |= 0x00000030;
-
- /* Disable interrupts */
- i2c->i2c_i2mod = 0x00;
- i2c->i2c_i2cmr = 0x00;
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2add = slaveaddr;
-
- /*
- * Set the I2C BRG Clock division factor from desired i2c rate
- * and current CPU rate (we assume sccr dfbgr field is 0;
- * divide BRGCLK by 1)
- */
- PRINTD(("[I2C] Setting rate...\n"));
- i2c_setrate (gd->cpu_clk, CONFIG_SYS_I2C_SPEED) ;
-
- /* Set I2C controller in master mode */
- i2c->i2c_i2com = 0x01;
-
- /* Set SDMA bus arbitration level to 5 (SDCR) */
- immap->im_siu_conf.sc_sdcr = 0x0001 ;
-
- /* Initialize Tx/Rx parameters */
- iip->iic_rbase = rbase;
- iip->iic_tbase = tbase;
- rxbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_rbase]);
- txbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_tbase]);
-
- PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
- PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- /* Set big endian byte order */
- iip->iic_tfcr = 0x10;
- iip->iic_rfcr = 0x10;
-
- /* Set maximum receive size. */
- iip->iic_mrblr = I2C_RXTX_LEN;
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- /*
- * Initialize required parameters if using microcode patch.
- */
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
- iip->iic_rstate = 0;
- iip->iic_tstate = 0;
-#else
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-#endif
-
- /* Clear events and interrupts */
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2cmr = 0x00;
-}
-
-static void
-i2c_newio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
- PRINTD(("[I2C] i2c_newio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
- state->rx_idx = 0;
- state->tx_idx = 0;
- state->rxbd = (void*)&cp->cp_dpmem[iip->iic_rbase];
- state->txbd = (void*)&cp->cp_dpmem[iip->iic_tbase];
- state->tx_space = MAX_TX_SPACE;
- state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
- state->err_cb = NULL;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
- PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
-
- /* clear the buffer memory */
- memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
-}
-
-static int
-i2c_send(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size,
- unsigned char *dataout)
-{
- volatile I2C_BD *txbd;
- int i,j;
-
- PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
- address, secondary_address, flags, size));
-
- /* trying to send message larger than BD */
- if (size > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
- return I2CERR_NO_BUFFERS;
-
- txbd = (I2C_BD *)state->txbd;
- txbd->addr = state->tx_buf;
-
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- if (flags & I2CF_START_COND) {
- PRINTD(("[I2C] Formatting addresses...\n"));
- if (flags & I2CF_ENABLE_SECONDARY) {
- txbd->length = size + 2; /* Length of msg + dest addr */
- txbd->addr[0] = address << 1;
- txbd->addr[1] = secondary_address;
- i = 2;
- } else {
- txbd->length = size + 1; /* Length of msg + dest addr */
- txbd->addr[0] = address << 1; /* Write dest addr to BD */
- i = 1;
- }
- } else {
- txbd->length = size; /* Length of message */
- i = 0;
- }
-
- /* set up txbd */
- txbd->status = BD_SC_READY;
- if (flags & I2CF_START_COND)
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-
- /* Copy data to send into buffer */
- PRINTD(("[I2C] copy data...\n"));
- for(j = 0; j < size; i++, j++)
- txbd->addr[i] = dataout[j];
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
-
- return 0;
-}
-
-static int
-i2c_receive(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size_to_expect,
- unsigned char *datain)
-{
- volatile I2C_BD *rxbd, *txbd;
-
- PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
-
- /* Expected to receive too much */
- if (size_to_expect > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
- || state->tx_space < 2)
- return I2CERR_NO_BUFFERS;
-
- rxbd = (I2C_BD *)state->rxbd;
- txbd = (I2C_BD *)state->txbd;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- txbd->addr = state->tx_buf;
-
- /* set up TXBD for destination address */
- if (flags & I2CF_ENABLE_SECONDARY) {
- txbd->length = 2;
- txbd->addr[0] = address << 1; /* Write data */
- txbd->addr[1] = secondary_address; /* Internal address */
- txbd->status = BD_SC_READY;
- } else {
- txbd->length = 1 + size_to_expect;
- txbd->addr[0] = (address << 1) | 0x01;
- txbd->status = BD_SC_READY;
- memset(&txbd->addr[1], 0, txbd->length);
- }
-
- /* set up rxbd for reception */
- rxbd->status = BD_SC_EMPTY;
- rxbd->length = size_to_expect;
- rxbd->addr = datain;
-
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND) {
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
- rxbd->status |= BD_SC_WRAP;
- }
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
- PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- rxbd->length,
- rxbd->status,
- rxbd->addr[0],
- rxbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
- state->rx_idx++;
- state->rxbd = (void*)(rxbd + 1);
-
- return 0;
-}
-
-
-static int i2c_doio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
- volatile I2C_BD *txbd, *rxbd;
- volatile int j = 0;
-
- PRINTD(("[I2C] i2c_doio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
-
- if (state->tx_idx <= 0 && state->rx_idx <= 0) {
- PRINTD(("[I2C] No I/O is queued\n"));
- return I2CERR_QUEUE_EMPTY;
- }
-
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
-
- /* Enable I2C */
- PRINTD(("[I2C] Enabling I2C...\n"));
- i2c->i2c_i2mod |= 0x01;
-
- /* Begin transmission */
- i2c->i2c_i2com |= 0x80;
-
- /* Loop until transmit & receive completed */
-
- if (state->tx_idx > 0) {
- txbd = ((I2C_BD*)state->txbd) - 1;
- PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
- while((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
- if (ctrlc()) {
- return (-1);
- }
- __asm__ __volatile__ ("eieio");
- }
- }
-
- if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
- rxbd = ((I2C_BD*)state->rxbd) - 1;
- PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
- while((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
- if (ctrlc()) {
- return (-1);
- }
- __asm__ __volatile__ ("eieio");
- }
- }
-
- /* Turn off I2C */
- i2c->i2c_i2mod &= ~0x01;
-
- if (state->err_cb != NULL) {
- int n, i, b;
-
- /*
- * if we have an error callback function, look at the
- * error bits in the bd status and pass them back
- */
-
- if ((n = state->tx_idx) > 0) {
- for (i = 0; i < n; i++) {
- txbd = ((I2C_BD*)state->txbd) - (n - i);
- if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
- (*state->err_cb)(I2CECB_TX_ERR|b, i);
- }
- }
-
- if ((n = state->rx_idx) > 0) {
- for (i = 0; i < n; i++) {
- rxbd = ((I2C_BD*)state->rxbd) - (n - i);
- if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
- (*state->err_cb)(I2CECB_RX_ERR|b, i);
- }
- }
-
- if (j >= TOUT_LOOP)
- (*state->err_cb)(I2CECB_TIMEOUT, 0);
- }
-
- return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0;
-}
-
-static int had_tx_nak;
-
-static void
-i2c_test_callback(int flags, int xnum)
-{
- if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
- had_tx_nak = 1;
-}
-
-int i2c_probe(uchar chip)
-{
- i2c_state_t state;
- int rc;
- uchar buf[1];
-
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- i2c_newio(&state);
-
- state.err_cb = i2c_test_callback;
- had_tx_nak = 0;
-
- rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
-
- if (rc != 0)
- return (rc);
-
- rc = i2c_doio(&state);
-
- if ((rc != 0) && (rc != I2CERR_TIMEOUT))
- return (rc);
-
- return (had_tx_nak);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
-#ifdef CONFIG_LWMON
- WATCHDOG_RESET();
-#endif
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones like
- * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
- * extra bits end up in the "chip address" bit slots. This makes
- * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_receive failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones like
- * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
- * extra bits end up in the "chip address" bit slots. This makes
- * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: first i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: second i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-#endif /* CONFIG_HARD_I2C */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-
-/************************************************************************/
-
-/*
- * CPM interrupt vector functions.
- */
-struct interrupt_action {
- interrupt_handler_t *handler;
- void *arg;
-};
-
-static struct interrupt_action cpm_vecs[CPMVEC_NR];
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-static void cpm_interrupt_init (void);
-static void cpm_interrupt (void *regs);
-
-/************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- /* disable all interrupts */
- immr->im_siu_conf.sc_simask = 0;
-
- /* Configure CPM interrupts */
- cpm_interrupt_init ();
-
- return (0);
-}
-
-/************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- ulong simask, newmask;
- ulong vec, v_bit;
-
- /*
- * read the SIVEC register and shift the bits down
- * to get the irq number
- */
- vec = immr->im_siu_conf.sc_sivec;
- irq = vec >> 26;
- v_bit = 0x80000000UL >> irq;
-
- /*
- * Read Interrupt Mask Register and Mask Interrupts
- */
- simask = immr->im_siu_conf.sc_simask;
- newmask = simask & (~(0xFFFF0000 >> irq));
- immr->im_siu_conf.sc_simask = newmask;
-
- if (!(irq & 0x1)) { /* External Interrupt ? */
- ulong siel;
-
- /*
- * Read Interrupt Edge/Level Register
- */
- siel = immr->im_siu_conf.sc_siel;
-
- if (siel & v_bit) { /* edge triggered interrupt ? */
- /*
- * Rewrite SIPEND Register to clear interrupt
- */
- immr->im_siu_conf.sc_sipend = v_bit;
- }
- }
-
- if (irq_vecs[irq].handler != NULL) {
- irq_vecs[irq].handler (irq_vecs[irq].arg);
- } else {
- printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
- irq, vec);
- /* turn off the bogus interrupt to avoid it from now */
- simask &= ~v_bit;
- }
- /*
- * Re-Enable old Interrupt Mask
- */
- immr->im_siu_conf.sc_simask = simask;
-}
-
-/************************************************************************/
-
-/*
- * CPM interrupt handler
- */
-static void cpm_interrupt (void *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- uint vec;
-
- /*
- * Get the vector by setting the ACK bit
- * and then reading the register.
- */
- immr->im_cpic.cpic_civr = 1;
- vec = immr->im_cpic.cpic_civr;
- vec >>= 11;
-
- if (cpm_vecs[vec].handler != NULL) {
- (*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
- } else {
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
- }
- /*
- * After servicing the interrupt,
- * we have to remove the status indicator.
- */
- immr->im_cpic.cpic_cisr |= (1 << vec);
-}
-
-/*
- * The CPM can generate the error interrupt when there is a race
- * condition between generating and masking interrupts. All we have
- * to do is ACK it and return. This is a no-op function so we don't
- * need any special tests in the interrupt handler.
- */
-static void cpm_error_interrupt (void *dummy)
-{
-}
-
-/************************************************************************/
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
- void *arg)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
- if (cpm_vecs[vec].handler != NULL) {
- printf ("CPM interrupt 0x%x replacing 0x%x\n",
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- cpm_vecs[vec].handler = handler;
- cpm_vecs[vec].arg = arg;
- immr->im_cpic.cpic_cimr |= (1 << vec);
-#if 0
- printf ("Install CPM interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- } else {
- /* SIU interrupt */
- if (irq_vecs[vec].handler != NULL) {
- printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
- vec,
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
- immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
- printf ("Install SIU interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- }
-}
-
-void irq_free_handler (int vec)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- cpm_vecs[vec].handler = NULL;
- cpm_vecs[vec].arg = NULL;
- } else {
- /* SIU interrupt */
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- }
-}
-
-/************************************************************************/
-
-static void cpm_interrupt_init (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /*
- * Initialize the CPM interrupt controller.
- */
-
- immr->im_cpic.cpic_cicr =
- (CICR_SCD_SCC4 |
- CICR_SCC_SCC3 |
- CICR_SCB_SCC2 |
- CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
-
- immr->im_cpic.cpic_cimr = 0;
-
- /*
- * Install the error handler.
- */
- irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
-
- immr->im_cpic.cpic_cicr |= CICR_IEN;
-
- /*
- * Install the cpm interrupt handler
- */
- irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
-}
-
-/************************************************************************/
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
- printf ("*** Timer Interrupt *** ");
-#endif
- /* Reset Timer Expired and Timers Interrupt Status */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
- __asm__ ("nop");
- /*
- Clear TEXPS (and TMIST on older chips). SPLSS (on older
- chips) is cleared too.
-
- Bitwise OR is a read-modify-write operation so ALL bits
- which are cleared by writing `1' would be cleared by
- operations like
-
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
-
- The same can be achieved by simple writing of the PLPRCR
- to itself. If a bit value should be preserved, read the
- register, ZERO the bit and write, not OR, the result back.
- */
- immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
-}
-
-/************************************************************************/
+++ /dev/null
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <version.h>
-
-#define CONFIG_8xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- sync
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- SYNC
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
-/* #define DEBUG */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#include <version.h>
-#include <stdarg.h>
-#include <lcdvideo.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
-#include <lcd.h>
-
-#ifdef CONFIG_LCD
-
-/************************************************************************/
-/* ** CONFIG STUFF -- should be moved to board config file */
-/************************************************************************/
-#ifndef CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
-#endif
-
-#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
-#undef CONFIG_LCD_LOGO
-#undef CONFIG_LCD_INFO
-#endif
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_KYOCERA_KCS057QV1AJ
-/*
- * Kyocera KCS057QV1AJ-G23. Passive, color, single scan.
- */
-#define LCD_BPP LCD_COLOR4
-
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- LCD_BPP, 1, 0, 1, 0, 5, 0, 0, 0
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_KYOCERA_KCS057QV1AJ */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_HITACHI_SP19X001_Z1A
-/*
- * Hitachi SP19X001-. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HITACHI_SP19X001_Z1A */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_NEC_NL6448AC33
-/*
- * NEC NL6448AC33-18. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448AC33 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC20
-/*
- * NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC20 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC33_54
-/*
- * NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC33_54 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ104V7DS01
-/*
- * SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
- 3, 0, 0, 1, 1, 25, 1, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ104V7DS01 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_16x9
-/*
- * Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am
- * not sure what it is.......
- */
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 15, 4, 0, 3
-};
-#endif /* CONFIG_SHARP_16x9 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ057Q3DC02
-/*
- * Sharp LQ057Q3DC02 display. Active, color, single scan.
- */
-#undef LCD_DF
-#define LCD_DF 12
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 15, 4, 0, 3
- /* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ057Q3DC02 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ64D341
-/*
- * Sharp LQ64D341 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 128, 16, 0, 32
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ64D341 */
-
-#ifdef CONFIG_SHARP_LQ065T9DR51U
-/*
- * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 248, 4, 0, 35
- /* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ065T9DR51U */
-
-#ifdef CONFIG_SHARP_LQ084V1DG21
-/*
- * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
- 3, 0, 0, 1, 1, 160, 3, 0, 48
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ084V1DG21 */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_HLD1045
-/*
- * HLD1045 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 160, 3, 0, 48
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HLD1045 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_PRIMEVIEW_V16C6448AC
-/*
- * Prime View V16C6448AC
- */
-vidinfo_t panel_info = {
- 640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 35
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_PRIMEVIEW_V16C6448AC */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_OPTREX_BW
-/*
- * Optrex CBL50840-2 NF-FW 99 22 M5
- * or
- * Hitachi LMG6912RPFC-00T
- * or
- * Hitachi SP14Q002
- *
- * 320x240. Black & white.
- */
-#define OPTREX_BPP 0 /* 0 - monochrome, 1 bpp */
- /* 1 - 4 grey levels, 2 bpp */
- /* 2 - 16 grey levels, 4 bpp */
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
-};
-#endif /* CONFIG_OPTREX_BW */
-
-/*-----------------------------------------------------------------*/
-#ifdef CONFIG_EDT32F10
-/*
- * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
- */
-#define LCD_BPP LCD_MONOCHROME
-#define LCD_DF 10
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0
-};
-#endif
-/*----------------------------------------------------------------------*/
-
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-short console_col;
-short console_row;
-
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno,
- ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#if defined(CONFIG_RBC823)
-void lcd_disable (void);
-#endif
-
-/************************************************************************/
-
-/************************************************************************/
-/* ----------------- chipset specific functions ----------------------- */
-/************************************************************************/
-
-/*
- * Calculate fb size for VIDEOLFB_ATAG.
- */
-ulong calc_fbsize (void)
-{
- ulong size;
- int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
- size = line_length * panel_info.vl_row;
-
- return size;
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
- uint lccrtmp;
- uint lchcr_hpc_tmp;
-
- /* Initialize the LCD control register according to the LCD
- * parameters defined. We do everything here but enable
- * the controller.
- */
-
-#ifdef CONFIG_RPXLITE
- /* This is special for RPXlite_DW Software Development Platform **[Sam]** */
- panel_info.vl_dp = CONFIG_SYS_LOW;
-#endif
-
- lccrtmp = LCDBIT (LCCR_BNUM_BIT,
- (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
-
- lccrtmp |= LCDBIT (LCCR_CLKP_BIT, panel_info.vl_clkp) |
- LCDBIT (LCCR_OEP_BIT, panel_info.vl_oep) |
- LCDBIT (LCCR_HSP_BIT, panel_info.vl_hsp) |
- LCDBIT (LCCR_VSP_BIT, panel_info.vl_vsp) |
- LCDBIT (LCCR_DP_BIT, panel_info.vl_dp) |
- LCDBIT (LCCR_BPIX_BIT, panel_info.vl_bpix) |
- LCDBIT (LCCR_LBW_BIT, panel_info.vl_lbw) |
- LCDBIT (LCCR_SPLT_BIT, panel_info.vl_splt) |
- LCDBIT (LCCR_CLOR_BIT, panel_info.vl_clor) |
- LCDBIT (LCCR_TFT_BIT, panel_info.vl_tft);
-
-#if 0
- lccrtmp |= ((SIU_LEVEL5 / 2) << 12);
- lccrtmp |= LCCR_EIEN;
-#endif
-
- lcdp->lcd_lccr = lccrtmp;
- lcdp->lcd_lcsr = 0xFF; /* Clear pending interrupts */
-
- /* Initialize LCD controller bus priorities.
- */
-#ifdef CONFIG_RBC823
- immr->im_siu_conf.sc_sdcr = (immr->im_siu_conf.sc_sdcr & ~0x0f) | 1; /* RAID = 01, LAID = 00 */
-#else
- immr->im_siu_conf.sc_sdcr &= ~0x0f; /* RAID = LAID = 0 */
-
- /* set SHFT/CLOCK division factor 4
- * This needs to be set based upon display type and processor
- * speed. The TFT displays run about 20 to 30 MHz.
- * I was running 64 MHz processor speed.
- * The value for this divider must be chosen so the result is
- * an integer of the processor speed (i.e., divide by 3 with
- * 64 MHz would be bad).
- */
- immr->im_clkrst.car_sccr &= ~0x1F;
- immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
-
-#endif /* CONFIG_RBC823 */
-
-#if defined(CONFIG_RBC823)
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pddat &= 0x0300;
- immr->im_ioport.iop_pdpar |= 0x1CFF;
- immr->im_ioport.iop_pddir |= 0x1CFF;
-
- /* Configure LCD_ON, VEE_ON, CCFL_ON on port B.
- */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
- immr->im_cpm.cp_pbpar &= ~0x00005001;
- immr->im_cpm.cp_pbdir |= 0x00005001;
-#elif !defined(CONFIG_EDT32F10)
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1FFF;
- immr->im_ioport.iop_pddir |= 0x1FFF;
-
- /* Enable LCD_A/B/C on port B.
- */
- immr->im_cpm.cp_pbpar |= 0x00005001;
- immr->im_cpm.cp_pbdir |= 0x00005001;
-#else
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1DFF;
- immr->im_ioport.iop_pdpar &= ~0x0200;
- immr->im_ioport.iop_pddir |= 0x1FFF;
- immr->im_ioport.iop_pddat |= 0x0200;
-#endif
-
- /* Load the physical address of the linear frame buffer
- * into the LCD controller.
- * BIG NOTE: This has to be modified to load A and B depending
- * upon the split mode of the LCD.
- */
- lcdp->lcd_lcfaa = (ulong)lcd_base;
- lcdp->lcd_lcfba = (ulong)lcd_base;
-
- /* MORE HACKS...This must be updated according to 823 manual
- * for different panels.
- * Udi Finkelstein - done - see below:
- * Note: You better not try unsupported combinations such as
- * 4-bit wide passive dual scan LCD at 4/8 Bit color.
- */
- lchcr_hpc_tmp =
- (panel_info.vl_col *
- (panel_info.vl_tft ? 8 :
- (((2 - panel_info.vl_lbw) << /* 4 bit=2, 8-bit = 1 */
- /* use << to mult by: single scan = 1, dual scan = 2 */
- panel_info.vl_splt) *
- (panel_info.vl_bpix | 1)))) >> 3; /* 2/4 BPP = 1, 8/16 BPP = 3 */
-
- lcdp->lcd_lchcr = LCHCR_BO |
- LCDBIT (LCHCR_AT_BIT, 4) |
- LCDBIT (LCHCR_HPC_BIT, lchcr_hpc_tmp) |
- panel_info.vl_wbl;
-
- lcdp->lcd_lcvcr = LCDBIT (LCVCR_VPW_BIT, panel_info.vl_vpw) |
- LCDBIT (LCVCR_LCD_AC_BIT, panel_info.vl_lcdac) |
- LCDBIT (LCVCR_VPC_BIT, panel_info.vl_row) |
- panel_info.vl_wbf;
-
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef NOT_USED_SO_FAR
-static void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- unsigned short colreg, *cmap_ptr;
-
- cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
- colreg = *cmap_ptr;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
-
- *red = (colreg >> 8) & 0x0F;
- *green = (colreg >> 4) & 0x0F;
- *blue = colreg & 0x0F;
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- unsigned short colreg, *cmap_ptr;
-
- cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
- colreg = ((red & 0x0F) << 8) |
- ((green & 0x0F) << 4) |
- (blue & 0x0F) ;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
- *cmap_ptr = colreg;
-
- debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
- regno, &(cp->lcd_cmap[regno * 2]),
- red, green, blue,
- cp->lcd_cmap[ regno * 2 ], cp->lcd_cmap[(regno * 2) + 1]);
-}
-#endif /* LCD_COLOR8 */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_MONOCHROME
-static
-void lcd_initcolregs (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- ushort regno;
-
- for (regno = 0; regno < 16; regno++) {
- cp->lcd_cmap[regno * 2] = 0;
- cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
- }
-}
-#endif
-
-/*----------------------------------------------------------------------*/
-
-void lcd_enable (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
- /* Enable the LCD panel */
-#ifndef CONFIG_RBC823
- immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */
-#endif
- lcdp->lcd_lccr |= LCCR_PON;
-
-#ifdef CONFIG_V37
- /* Turn on display backlight */
- immr->im_cpm.cp_pbpar |= 0x00008000;
- immr->im_cpm.cp_pbdir |= 0x00008000;
-#elif defined(CONFIG_RBC823)
- /* Turn on display backlight */
- immr->im_cpm.cp_pbdat |= 0x00004000;
-#endif
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
-#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
- /* Enable LCD later in sysmon test, only if temperature is OK */
-#else
- c |= 0x07; /* Power on CCFL, Enable CCFL, Chip Enable LCD */
-#endif
- pic_write (0x60, c);
- }
-#endif /* CONFIG_LWMON */
-
-#if defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
- unsigned long bgi, ctr;
- char *p;
-
- if ((p = getenv("lcdbgi")) != NULL) {
- bgi = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- bgi = 0xFFF;
- }
-
- if ((p = getenv("lcdctr")) != NULL) {
- ctr = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- ctr=0x7FF;
- }
-
- r360_i2c_lcd_write(0x10, 0x01);
- r360_i2c_lcd_write(0x20, 0x01);
- r360_i2c_lcd_write(0x30 | ((bgi>>8) & 0xF), bgi & 0xFF);
- r360_i2c_lcd_write(0x40 | ((ctr>>8) & 0xF), ctr & 0xFF);
- }
-#endif /* CONFIG_R360MPI */
-#ifdef CONFIG_RBC823
- udelay(200000); /* wait 200ms */
- /* Turn VEE_ON first */
- immr->im_cpm.cp_pbdat |= 0x00000001;
- udelay(200000); /* wait 200ms */
- /* Now turn on LCD_ON */
- immr->im_cpm.cp_pbdat |= 0x00001000;
-#endif
-#ifdef CONFIG_RRVISION
- debug ("PC4->Output(1): enable LVDS\n");
- debug ("PC5->Output(0): disable PAL clock\n");
- immr->im_ioport.iop_pddir |= 0x1000;
- immr->im_ioport.iop_pcpar &= ~(0x0C00);
- immr->im_ioport.iop_pcdir |= 0x0C00 ;
- immr->im_ioport.iop_pcdat |= 0x0800 ;
- immr->im_ioport.iop_pcdat &= ~(0x0400);
- debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
- immr->im_ioport.iop_pdpar,
- immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
- debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
- immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir,
- immr->im_ioport.iop_pcdat);
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-#if defined (CONFIG_RBC823)
-void lcd_disable (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
- c &= ~0x07; /* Power off CCFL, Disable CCFL, Chip Disable LCD */
- pic_write (0x60, c);
- }
-#elif defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
-
- r360_i2c_lcd_write(0x10, 0x00);
- r360_i2c_lcd_write(0x20, 0x00);
- r360_i2c_lcd_write(0x30, 0x00);
- r360_i2c_lcd_write(0x40, 0x00);
- }
-#endif /* CONFIG_LWMON */
- /* Disable the LCD panel */
- lcdp->lcd_lccr &= ~LCCR_PON;
-#ifdef CONFIG_RBC823
- /* Turn off display backlight, VEE and LCD_ON */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
-#else
- immr->im_siu_conf.sc_sdcr &= ~(1 << (31 - 25)); /* LAM = 0 */
-#endif /* CONFIG_RBC823 */
-}
-#endif /* NOT_USED_SO_FAR || CONFIG_RBC823 */
-
-
-/************************************************************************/
-
-#endif /* CONFIG_LCD */
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <mpc8xx.h>
-#include <ppc_asm.tmpl>
-#include <asm/cache.h>
-
-#define CACHE_CMD_ENABLE 0x02000000
-#define CACHE_CMD_DISABLE 0x04000000
-#define CACHE_CMD_LOAD_LOCK 0x06000000
-#define CACHE_CMD_UNLOCK_LINE 0x08000000
-#define CACHE_CMD_UNLOCK_ALL 0x0A000000
-#define CACHE_CMD_INVALIDATE 0x0C000000
-#define SPEED_PLPRCR_WAIT_5CYC 150
-#define _CACHE_ALIGN_SIZE 16
-
-
- .text
- .align 2
- .globl plprcr_write_866
-
-/*
- * void plprcr_write_866 (long plprcr)
- * Write PLPRCR, including workaround for device errata SIU4 and SIU9.
- */
-
-plprcr_write_866:
- mfspr r10, LR /* save the Link Register value */
-
- /* turn instruction cache on (no MMU required for instructions)
- */
- lis r4, CACHE_CMD_ENABLE@h
- ori r4, r4, CACHE_CMD_ENABLE@l
- mtspr IC_CST, r4
- isync
-
- /* clear IC_CST error bits
- */
- mfspr r4, IC_CST
-
- bl plprcr_here
-
-plprcr_here:
- mflr r5
-
- /* calculate relocation offset
- */
- lis r4, plprcr_here@h
- ori r4, r4, plprcr_here@l
- sub r5, r5, r4
-
- /* calculate first address of this function
- */
- lis r6, plprcr_write_866@h
- ori r6, r6, plprcr_write_866@l
- add r6, r6, r5
-
- /* calculate end address of this function
- */
- lis r7, plprcr_end@h
- ori r7, r7, plprcr_end@l
- add r7, r7, r5
-
- /* load and lock code addresses
- */
- mr r5, r6
-
-plprcr_loop:
- mtspr IC_ADR, r5
- addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */
-
- lis r4, CACHE_CMD_LOAD_LOCK@h
- ori r4, r4, CACHE_CMD_LOAD_LOCK@l
- mtspr IC_CST, r4
- isync
-
- cmpw r5, r7
- blt plprcr_loop
-
- /* IC_CST error bits not evaluated
- */
-
- /* switch PLPRCR
- */
- mfspr r4, IMMR /* read IMMR */
- rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */
-
- /* write sequence according to MPC866 Errata
- */
- stw r3, PLPRCR(r4)
- isync
-
- lis r3, SPEED_PLPRCR_WAIT_5CYC@h
- ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
-
-plprcr_wait:
- cmpwi r3, 0
- beq plprcr_wait_end
- nop
- subi r3, r3, 1
- b plprcr_wait
-
-plprcr_wait_end:
-
- /* unlock instruction cache but leave it enabled
- */
- lis r4, CACHE_CMD_UNLOCK_ALL@h
- ori r4, r4, CACHE_CMD_UNLOCK_ALL@l
- mtspr IC_CST, r4
- isync
-
- mtspr LR, r10 /* restore original Link Register value */
- blr
-
-plprcr_end:
+++ /dev/null
-/*
- * File: scc.c
- * Description:
- * Basic ET HW initialization and packet RX/TX routines
- *
- * NOTE <<<IMPORTANT: PLEASE READ>>>:
- * Do not cache Rx/Tx buffers!
- */
-
-/*
- * MPC823 <-> MC68160 Connections:
- *
- * Setup MPC823 to work with MC68160 Enhanced Ethernet
- * Serial Tranceiver as follows:
- *
- * MPC823 Signal MC68160 Comments
- * ------ ------ ------- --------
- * PA-12 ETHTX --------> TX Eth. Port Transmit Data
- * PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
- * PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
- * PA-13 ETHRX <-------- RX Eth. Port Receive Data
- * PC-8 E_RENA <-------- RENA Eth. Receive Enable
- * PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
- * PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
- *
- * FADS Board Signal MC68160 Comments
- * ----------------- ------- --------
- * (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
- * (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
- * (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
- * (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
- *
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * SCC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length);
-static int scc_recv(struct eth_device* dev);
-static int scc_init (struct eth_device* dev, bd_t * bd);
-static void scc_halt(struct eth_device* dev);
-
-int scc_initialize(bd_t *bis)
-{
- struct eth_device* dev;
-
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "SCC ETHERNET");
- dev->iobase = 0;
- dev->priv = 0;
- dev->init = scc_init;
- dev->halt = scc_halt;
- dev->send = scc_send;
- dev->recv = scc_recv;
-
- eth_register(dev);
-
- return 1;
-}
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i, j=0;
-#if 0
- volatile char *in, *out;
-#endif
-
- /* section 16.9.23.3
- * Wait for ready
- */
-#if 0
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
- out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
- in = packet;
- for(i = 0; i < length; i++) {
- *out++ = *in++;
- }
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
-
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
-
- /* wrap around buffer index when necessary */
- if (txIdx >= TX_BUF_CNT) txIdx = 0;
-#endif
-
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX not ready\n");
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX timeout\n");
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
- return i;
-}
-
-static int scc_recv (struct eth_device *dev)
-{
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- NetReceive (NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-/**************************************************************
- *
- * SCC Ethernet Initialization Routine
- *
- *************************************************************/
-
-static int scc_init (struct eth_device *dev, bd_t * bis)
-{
-
- int i;
- scc_enet_t *pram_ptr;
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_LWMON)
- reset_phy();
-#endif
-
-#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
- /* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
- *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
- *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#else
- *((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
- *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif
-#endif
-
- pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
-
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
- dpram_alloc_align (sizeof (RTXBD), 8));
-#else
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-#endif
- }
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
- /* Configure port A pins for Txd and Rxd.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
- /* Configure port B pins for Txd and Rxd.
- */
- immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
-#else
-#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
- /* Configure port C pins to disable External Loopback
- */
- immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
- immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
-#endif /* PC_ENET_LBK */
-
- /* Configure port C pins to enable CLSN and RENA.
- */
- immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
- /* Configure port A for TCLK and RCLK.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
- immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-
- /*
- * Configure Serial Interface clock routing -- see section 16.7.5.3
- * First, clear all SCC bits to zero, then set the ones we want.
- */
-
- immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
- immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
-
-
- /*
- * Initialize SDCR -- see section 16.9.23.7
- * SDMA configuration register
- */
- immr->im_siu_conf.sc_sdcr = 0x01;
-
-
- /*
- * Setup SCC Ethernet Parameter RAM
- */
-
- pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
- pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
-
- pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
-
- pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
- pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
-
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
-
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
-
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
- */
-
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc =
- (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
-
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /*
- * Enter Command: Initialize Rx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Ethernet Specific Parameter RAM
- * see table 13-16, pg. 660,
- * pg. 681 (example with suggested settings)
- */
-
- pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
- pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
- pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
- pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
- pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
- pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
-
- pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
- pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
- pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
-
- pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
- pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
-
- pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
- pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
- pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
- pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
-
-#define ea eth_get_dev()->enetaddr
- pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
- pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
- pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
- pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
- pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
- pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
- pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
- pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
- pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
-
- /*
- * Enter Command: Initialize Tx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Mask all Events in SCCM - we use polling mode
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
-
- /*
- * Clear Events in SCCE -- Clear bits by writing 1's
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
-
-
- /*
- * Initialize GSMR High 32-Bits
- * Settings: Normal Mode
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
-
- /*
- * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
- * Settings:
- * TCI = Invert
- * TPL = 48 bits
- * TPP = Repeating 10's
- * MODE = Ethernet
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
-
- /*
- * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
-
- /*
- * Initialize the PSMR
- * Settings:
- * CRC = 32-Bit CCITT
- * NIB = Begin searching for SFD 22 bits after RENA
- * FDE = Full Duplex Enable
- * LPB = Loopback Enable (Needed when FDE is set)
- * BRO = Reject broadcast packets
- * PROMISCOUS = Catch all packets regardless of dest. MAC adress
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
- SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
- SCC_PSMR_FDE | SCC_PSMR_LPB |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
- SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
- SCC_PSMR_PRO |
-#endif
- 0;
-
- /*
- * Configure Ethernet TENA Signal
- */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
- immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
- immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
- immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
- immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
- /*
- * Port C is used to control the PHY,MC68160.
- */
- immr->im_ioport.iop_pcdir |=
- (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
- immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
- immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#ifdef CONFIG_RPXCLASSIC
- *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
- *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
-#ifdef CONFIG_RPXLITE
- *((uchar *) BCSR0) |= BCSR0_ETHEN;
-#endif
-
-#if defined(CONFIG_QS860T)
- /*
- * PB27=FDE-, set output low for full duplex
- * PB26=Link Test Enable, normally high output
- */
- immr->im_cpm.cp_pbdir |= 0x00000030;
- immr->im_cpm.cp_pbdat |= 0x00000020;
- immr->im_cpm.cp_pbdat &= ~0x00000010;
-#endif /* QS860T */
-
-#ifdef CONFIG_MBX
- board_ether_init ();
-#endif
-
-#if defined(CONFIG_NETVIA)
-#if defined(PA_ENET_PDN)
- immr->im_ioport.iop_papar &= ~PA_ENET_PDN;
- immr->im_ioport.iop_padir |= PA_ENET_PDN;
- immr->im_ioport.iop_padat |= PA_ENET_PDN;
-#elif defined(PB_ENET_PDN)
- immr->im_cpm.cp_pbpar &= ~PB_ENET_PDN;
- immr->im_cpm.cp_pbdir |= PB_ENET_PDN;
- immr->im_cpm.cp_pbdat |= PB_ENET_PDN;
-#elif defined(PC_ENET_PDN)
- immr->im_ioport.iop_pcpar &= ~PC_ENET_PDN;
- immr->im_ioport.iop_pcdir |= PC_ENET_PDN;
- immr->im_ioport.iop_pcdat |= PC_ENET_PDN;
-#elif defined(PD_ENET_PDN)
- immr->im_ioport.iop_pdpar &= ~PD_ENET_PDN;
- immr->im_ioport.iop_pddir |= PD_ENET_PDN;
- immr->im_ioport.iop_pddat |= PD_ENET_PDN;
-#endif
-#endif
-
- /*
- * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /*
- * Work around transmit problem with first eth packet
- */
-#if defined (CONFIG_FADS)
- udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
- udelay (100000); /* wait 100 ms */
-#endif
-
- return 1;
-}
-
-
-static void scc_halt (struct eth_device *dev)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-}
-
-#if 0
-void restart (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-}
-#endif
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
-
-#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
-#define SMC_INDEX 0
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
-
-#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
-#define SMC_INDEX 1
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
-
-#endif /* CONFIG_8xx_CONS_SMCx */
-
-#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
-
-#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
-
-#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
-
-#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-static void serial_setdivisor(volatile cpm8xx_t *cp)
-{
- int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
-
- if(divisor/16>0x1000) {
- /* bad divisor, assume 50MHz clock and 9600 baud */
- divisor=(50*1000*1000 + 8*9600)/16/9600;
- }
-
-#ifdef CONFIG_SYS_BRGCLK_PRESCALE
- divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
-#endif
-
- if(divisor<=0x1000) {
- cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
- } else {
- cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
- }
-}
-
-#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static void smc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SMCx
- */
-
- cp->cp_simode = 0x00000000;
-
- serial_setdivisor(cp);
-}
-
-static int smc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
- up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
-#else
- /* Disable relocation */
- up->smc_rpbase = 0;
-#endif
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 1;
-
- /* clear error conditions */
-#ifdef CONFIG_SYS_SDSR
- im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
- im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
- /* clear SDMA interrupt mask */
-#ifdef CONFIG_SYS_SDMR
- im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
- im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-#if defined(CONFIG_8xx_CONS_SMC1)
- /* Use Port B for SMC1 instead of other functions. */
- cp->cp_pbpar |= 0x000000c0;
- cp->cp_pbdir &= ~0x000000c0;
- cp->cp_pbodr &= ~0x000000c0;
-#else /* CONFIG_8xx_CONS_SMC2 */
-# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
- /* Use Port A for SMC2 instead of other functions. */
- ip->iop_papar |= 0x00c0;
- ip->iop_padir &= ~0x00c0;
- ip->iop_paodr &= ~0x00c0;
-# else /* must be a 860 then */
- /* Use Port B for SMC2 instead of other functions.
- */
- cp->cp_pbpar |= 0x00000c00;
- cp->cp_pbdir &= ~0x00000c00;
- cp->cp_pbodr &= ~0x00000c00;
-# endif
-#endif
-
-#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
- /* Enable RS232 */
-#if defined(CONFIG_8xx_CONS_SMC1)
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
-#else
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
-#endif
-#endif /* CONFIG_FADS */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
- /* Enable Monitor Port Transceiver */
- *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
-#endif /* CONFIG_RPXLITE */
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- /* allocate
- * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
- */
- dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
-#else
- dpaddr = CPM_SERIAL_BASE ;
-#endif
-
- rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
- /* Allocate space for two buffer descriptors in the DP ram.
- * For now, this address seems OK, but it may have to
- * change with newer versions of the firmware.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = SMC_EB;
- up->smc_tfcr = SMC_EB;
-#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
- up->smc_rbptr = up->smc_rbase;
- up->smc_tbptr = up->smc_tbase;
- up->smc_rstate = 0;
- up->smc_tstate = 0;
-#endif
-
-#if defined(CONFIG_MBX)
- board_serial_init();
-#endif /* CONFIG_MBX */
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
-#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
- /* clock source is PLD */
-
- /* set freq to 19200 Baud */
- *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
- /* configure clk4 as input */
- im->im_ioport.iop_pdpar |= 0x800;
- im->im_ioport.iop_pddir &= ~0x800;
-
- cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
-#else
- /* Set up the baud rate generator */
- smc_setbrg ();
-#endif
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-static void
-smc_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
- if (c == '\n')
- smc_putc ('\r');
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for last character to go. */
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (rtx->txbd.cbd_sc & BD_SC_READY) {
- WATCHDOG_RESET ();
- __asm__("eieio");
- }
-}
-
-static void
-smc_puts (const char *s)
-{
- while (*s) {
- smc_putc (*s++);
- }
-}
-
-static int
-smc_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-static int
-smc_tstc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-struct serial_device serial_smc_device =
-{
- "serial_smc",
- "SMC",
- smc_init,
- smc_setbrg,
- smc_getc,
- smc_tstc,
- smc_putc,
- smc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
-
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-static void
-scc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCx
- */
-
- cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
- serial_setdivisor(cp);
-}
-
-static int scc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- uint dpaddr;
-#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
- up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-
-#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
- { /* Disable Ethernet, enable Serial */
- uchar c;
-
- c = pic_read (0x61);
- c &= ~0x40; /* enable COM3 */
- c |= 0x80; /* disable Ethernet */
- pic_write (0x61, c);
-
- /* enable RTS2 */
- cp->cp_pbpar |= 0x2000;
- cp->cp_pbdat |= 0x2000;
- cp->cp_pbdir |= 0x2000;
- }
-#endif /* CONFIG_LWMON */
-
- /* Disable transmitter/receiver. */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
- /*
- * The MPC850 has SCC3 on Port B
- */
- cp->cp_pbpar |= 0x06;
- cp->cp_pbdir &= ~0x06;
- cp->cp_pbodr &= ~0x06;
-
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
- /*
- * Standard configuration for SCC's is on Part A
- */
- ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
- ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
- ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
- /*
- * The IP860 has SCC3 and SCC4 on Port D
- */
- ip->iop_pdpar |= ((3 << (2 * SCC_INDEX)));
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram. */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
- dpaddr = CPM_SERIAL2_BASE ;
-#endif
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 0x0001;
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
- rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the baud rate generator. */
- scc_setbrg ();
-
- /* Set up the uart parameters in the parameter ram. */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
- up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
-
- up->scc_genscc.scc_mrblr = 1; /* Single character receive */
- up->scc_maxidl = 0; /* disable max idle */
- up->scc_brkcr = 1; /* send one break character on stop TX */
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = 0x8000;
- up->scc_char2 = 0x8000;
- up->scc_char3 = 0x8000;
- up->scc_char4 = 0x8000;
- up->scc_char5 = 0x8000;
- up->scc_char6 = 0x8000;
- up->scc_char7 = 0x8000;
- up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Set low latency / small fifo. */
- sp->scc_gsmrh = SCC_GSMRH_RFW;
-
- /* Set SCC(x) clock mode to 16x
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCn
- */
-
- /* Set UART mode, clock divider 16 on Tx and Rx */
- sp->scc_gsmrl &= ~0xF;
- sp->scc_gsmrl |=
- (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
- sp->scc_psmr = 0;
- sp->scc_psmr |= SCU_PSMR_CL;
-
- /* Mask all interrupts and remove anything pending. */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
- sp->scc_dsr = 0x7e7e;
- sp->scc_psmr = 0x3000;
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Enable transmitter/receiver. */
- sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- return (0);
-}
-
-static void
-scc_putc(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
- if (c == '\n')
- scc_putc ('\r');
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go. */
-
- buf = (char *)tbdf->cbd_bufaddr;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (tbdf->cbd_sc & BD_SC_READY) {
- __asm__("eieio");
- WATCHDOG_RESET ();
- }
-}
-
-static void
-scc_puts (const char *s)
-{
- while (*s) {
- scc_putc (*s++);
- }
-}
-
-static int
-scc_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- unsigned char c;
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
-
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-static int
-scc_tstc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-struct serial_device serial_scc_device =
-{
- "serial_scc",
- "SCC",
- scc_init,
- scc_setbrg,
- scc_getc,
- scc_tstc,
- scc_putc,
- scc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- gd->be_quiet = 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-
-void
-kgdb_serial_init(void)
-{
- int i = -1;
-
- if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SMC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SMC2)
- i = 2;
-#endif
- }
- else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SCC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- i = 2;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- i = 3;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- i = 4;
-#endif
- }
-
- if (i >= 0)
- {
- serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
- }
-}
-
-void
-putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
- return;
-}
-#endif
-
-#endif /* CONFIG_8xx_CONS_NONE */
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
-
-#define PITC_SHIFT 16
-#define PITR_SHIFT 16
-/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
-#define SPEED_PIT_COUNTS 58
-#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
-#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
-
-/* Access functions for the Machine State Register */
-static __inline__ unsigned long get_msr(void)
-{
- unsigned long msr;
-
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2),
- * also determine bus clock speed (checking bus divider factor)
- *
- * (Approx. GCLK frequency in Hz)
- *
- * Initializes timer 2 and PIT, but disables them before return.
- * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
- *
- * When measuring the CPU clock against the PIT, we count cpu clocks
- * for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
- * These strange values for the timing interval and prescaling are used
- * because the formula for the CPU clock is:
- *
- * CPU clock = count * (177 * (8192 / 58))
- *
- * = count * 24999.7241
- *
- * which is very close to
- *
- * = count * 25000
- *
- * Since the count gives the CPU clock divided by 25000, we can get
- * the CPU clock rounded to the nearest 0.1 MHz by
- *
- * CPU clock = ((count + 2) / 4) * 100000;
- *
- * The rounding is important since the measurement is sometimes going
- * to be high or low by 0.025 MHz, depending on exactly how the clocks
- * and counters interact. By rounding we get the exact answer for any
- * CPU clock that is an even multiple of 0.1 MHz.
- */
-
-unsigned long measure_gclk(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
- ulong timer2_val;
- ulong msr_val;
-
-#ifdef CONFIG_SYS_8XX_XIN
- /* dont use OSCM, only use EXTCLK/512 */
- immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
-#else
- immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
-#endif
-
- /* Reset + Stop Timer 2, no cascading
- */
- timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
-
- /* Keep stopped, halt in debug mode
- */
- timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
-
- /* Timer 2 setup:
- * Output ref. interrupt disable, int. clock
- * Prescale by 177. Note that prescaler divides by value + 1
- * so we must subtract 1 here.
- */
- timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
-
- timerp->cpmt_tcn2 = 0; /* reset state */
- timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
-
- /*
- * PIT setup:
- *
- * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
- * so the count value would be SPEED_PITC_COUNTS - 1.
- * But there would be an uncertainty in the start time of 1/4
- * count since when we enable the PIT the count is not
- * synchronized to the 32768 Hz oscillator. The trick here is
- * to start the count higher and wait until the PIT count
- * changes to the required value before starting timer 2.
- *
- * One count high should be enough, but occasionally the start
- * is off by 1 or 2 counts of 32768 Hz. With the start value
- * set two counts high it seems very reliable.
- */
-
- immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
- immr->im_sit.sit_pitc = SPEED_PITC_INIT;
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /*
- * Start measurement - disable interrupts, just in case
- */
- msr_val = get_msr ();
- set_msr (msr_val & ~MSR_EE);
-
- immr->im_sit.sit_piscr |= PISCR_PTE;
-
- /* spin until get exact count when we want to start */
- while (immr->im_sit.sit_pitr > SPEED_PITC);
-
- timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
- while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
- timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
-
- /* re-enable external interrupts if they were on */
- set_msr (msr_val);
-
- /* Disable timer and PIT
- */
- timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
-
- timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
- immr->im_sit.sit_piscr &= ~PISCR_PTE;
-
-#if defined(CONFIG_SYS_8XX_XIN)
- /* not using OSCM, using XIN, so scale appropriately */
- return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
-#else
- return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
-#endif
-}
-
-#endif
-
-void get_brgclk(uint sccr)
-{
- uint divider = 0;
-
- switch((sccr&SCCR_DFBRG11)>>11){
- case 0:
- divider = 1;
- break;
- case 1:
- divider = 4;
- break;
- case 2:
- divider = 16;
- break;
- case 3:
- divider = 64;
- break;
- }
- gd->brg_clk = gd->cpu_clk/divider;
-}
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
-
-/*
- * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
- * or (if it is not defined) measure_gclk() (which uses the ref clock)
- * from above.
- */
-int get_clocks (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint sccr = immap->im_clkrst.car_sccr;
- /*
- * If for some reason measuring the gclk frequency won't
- * work, we return the hardwired value.
- * (For example, the cogent CMA286-60 CPU module has no
- * separate oscillator for PITRTCLK)
- */
-#if defined(CONFIG_8xx_GCLK_FREQ)
- gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-#elif defined(CONFIG_8xx_OSCLK)
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
- uint pll = immap->im_clkrst.car_plprcr;
- uint clk;
-
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
- (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
- (1<<PLPRCR_val(S));
- } else {
- clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
- }
- if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
- gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
- } else { /* High frequency division factor is used */
- gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
- }
-#else
- gd->cpu_clk = measure_gclk();
-#endif /* CONFIG_8xx_GCLK_FREQ */
-
- if ((sccr & SCCR_EBDF11) == 0) {
- /* No Bus Divider active */
- gd->bus_clk = gd->cpu_clk;
- } else {
- /* The MPC8xx has only one BDF: half clock speed */
- gd->bus_clk = gd->cpu_clk / 2;
- }
-
- get_brgclk(sccr);
-
- return (0);
-}
-
-#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
-
-static long init_pll_866 (long clk);
-
-/* This function sets up PLL (init_pll_866() is called) and
- * fills gd->cpu_clk and gd->bus_clk according to the environment
- * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
- * contains invalid value).
- * This functions requires an MPC866 or newer series CPU.
- */
-int get_clocks_866 (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- char tmp[64];
- long cpuclk = 0;
- long sccr_reg;
-
- if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0)
- cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-
- if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
- cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
-
- gd->cpu_clk = init_pll_866 (cpuclk);
-#if defined(CONFIG_SYS_MEASURE_CPUCLK)
- gd->cpu_clk = measure_gclk ();
-#endif
-
- get_brgclk(immr->im_clkrst.car_sccr);
-
- /* if cpu clock <= 66 MHz then set bus division factor to 1,
- * otherwise set it to 2
- */
- sccr_reg = immr->im_clkrst.car_sccr;
- sccr_reg &= ~SCCR_EBDF11;
-
- if (gd->cpu_clk <= 66000000) {
- sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
- gd->bus_clk = gd->cpu_clk;
- } else {
- sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */
- gd->bus_clk = gd->cpu_clk / 2;
- }
- immr->im_clkrst.car_sccr = sccr_reg;
-
- return (0);
-}
-
-/* Adjust sdram refresh rate to actual CPU clock.
- */
-int sdram_adjust_866 (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long mamr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- return (0);
-}
-
-/* Configure PLL for MPC866/859/885 CPU series
- * PLL multiplication factor is set to the value nearest to the desired clk,
- * assuming a oscclk of 10 MHz.
- */
-static long init_pll_866 (long clk)
-{
- extern void plprcr_write_866 (long);
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long n, plprcr;
- char mfi, mfn, mfd, s, pdf;
- long step_mfi, step_mfn;
-
- if (clk < 20000000) {
- clk *= 2;
- pdf = 1;
- } else {
- pdf = 0;
- }
-
- if (clk < 40000000) {
- s = 2;
- step_mfi = CONFIG_8xx_OSCLK / 4;
- mfd = 7;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else if (clk < 80000000) {
- s = 1;
- step_mfi = CONFIG_8xx_OSCLK / 2;
- mfd = 14;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else {
- s = 0;
- step_mfi = CONFIG_8xx_OSCLK;
- mfd = 29;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- }
-
- /* Calculate integer part of multiplication factor
- */
- n = clk / step_mfi;
- mfi = (char)n;
-
- /* Calculate numerator of fractional part of multiplication factor
- */
- n = clk - (n * step_mfi);
- mfn = (char)(n / step_mfn);
-
- /* Calculate effective clk
- */
- n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
- | PLPRCR_MFD_MSK | PLPRCR_S_MSK
- | PLPRCR_MFI_MSK | PLPRCR_DBRMO
- | PLPRCR_PDF_MSK))
- | (mfn << PLPRCR_MFN_SHIFT)
- | (mfd << PLPRCR_MFD_SHIFT)
- | (s << PLPRCR_S_SHIFT)
- | (mfi << PLPRCR_MFI_SHIFT)
- | (pdf << PLPRCR_PDF_SHIFT);
-
- if( (mfn > 0) && ((mfd / mfn) > 10) )
- plprcr |= PLPRCR_DBRMO;
-
- plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */
- immr->im_clkrstk.cark_plprcrk = 0x00000000;
-
- return (n);
-}
-
-#endif /* CONFIG_8xx_CPUCLK_DEFAULT */
-
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
- && !defined(CONFIG_TQM885D)
-/*
- * Adjust sdram refresh rate to actual CPU clock
- * and set timebase source according to actual CPU clock
- */
-int adjust_sdram_tbs_8xx (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long mamr;
- long sccr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- if (gd->cpu_clk < 67000000) {
- sccr = immr->im_clkrst.car_sccr;
- sccr |= SCCR_TBS;
- immr->im_clkrst.car_sccr = sccr;
- }
-
- return (0);
-}
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <serial.h>
-
-#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0xb00 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
-#endif
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER 0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
- unsigned int dpaddr;
-
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpic8xx_t *cpi;
- volatile cpm8xx_t *cp;
- volatile iop8xx_t *iop;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cpi = (cpic8xx_t *)&immr->im_cpic;
- iop = (iop8xx_t *) &immr->im_ioport;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
-/* 1 */
- /* ------------------------------------------------
- * Initialize Port B SPI pins -> page 34-8 MPC860UM
- * (we are only in Master Mode !)
- * ------------------------------------------------ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
- * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
- * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
- * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
- * -------------------------------------------- */
- cp->cp_pbpar |= 0x0000000E; /* set bits */
- cp->cp_pbpar &= ~0x00000001; /* reset bit */
-
- /* ----------------------------------------------
- * In/Out or per. Function 0/1
- * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
- * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
- * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
- * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
- * ---------------------------------------------- */
- cp->cp_pbdir |= 0x0000000F;
-
- /* ----------------------------------------------
- * open drain or active output
- * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
- * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
- * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
- * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
- * ---------------------------------------------- */
-
- cp->cp_pbodr |= 0x00000008;
- cp->cp_pbodr &= ~0x00000007;
-
- /* Initialize the parameter ram.
- * We need to make sure many things are initialized to zero
- */
- spi->spi_rstate = 0;
- spi->spi_rdp = 0;
- spi->spi_rbptr = 0;
- spi->spi_rbc = 0;
- spi->spi_rxtmp = 0;
- spi->spi_tstate = 0;
- spi->spi_tdp = 0;
- spi->spi_tbptr = 0;
- spi->spi_tbc = 0;
- spi->spi_txtmp = 0;
-
- /* Allocate space for one transmit and one receive buffer
- * descriptor in the DP ram
- */
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
-#else
- dpaddr = CPM_SPI_BASE;
-#endif
-
-/* 3 */
- /* Set up the SPI parameters in the parameter ram */
- spi->spi_rbase = dpaddr;
- spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
- /***********IMPORTANT******************/
-
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
- */
- spi->spi_rbptr = spi->spi_rbase;
- spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- /*
- * Initialize required parameters if using microcode patch.
- */
- spi->spi_rstate = 0;
- spi->spi_tstate = 0;
-#else
- /* Init SPI Tx + Rx Parameters */
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
-#endif /* CONFIG_SYS_SPI_UCODE_PATCH */
-
-/* 5 */
- /* Set SDMA configuration register */
- immr->im_siu_conf.sc_sdcr = 0x0001;
-
-/* 6 */
- /* Set to big endian. */
- spi->spi_tfcr = SMC_EB;
- spi->spi_rfcr = SMC_EB;
-
-/* 7 */
- /* Set maximum receive size. */
- spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- tbdf->cbd_sc &= ~BD_SC_READY;
- rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
- /* Set the bd's rx and tx buffer address pointers */
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *) malloc (MAX_BUFFER);
- txbuf = (uchar *) malloc (MAX_BUFFER);
-
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- cbd_t *tbdf, *rbdf;
- ushort loop;
- int tm;
-
- DPRINT (("*** spi_xfer entered ***\n"));
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Set CS for device */
- cp->cp_pbdat &= ~0x0001;
-
- /* Setting tx bd status and data length */
- tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
- tbdf->cbd_datlen = count;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
- tbdf->cbd_datlen));
-
- /* Setting rx bd status and data length */
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- rbdf->cbd_datlen = 0; /* rx length has no significance */
-
- loop = cp->cp_spmode & SPMODE_LOOP;
- cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
- loop |
- SPMODE_REV |
- SPMODE_MSTR |
- SPMODE_EN |
- SPMODE_LEN(8) | /* 8 Bits per char */
- SPMODE_PM(0x8) ; /* medium speed */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- cp->cp_spcom |= SPI_STR; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
- DPRINT (("*** spi_xfer: Tx buffer empty\n"));
- break;
- }
- if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
- DPRINT (("*** spi_xfer: Tx BD done\n"));
- break;
- }
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
- DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
- printf ("\n");
-#endif
-
- /* Clear CS for device */
- cp->cp_pbdat |= 0x0001;
-
- return count;
-}
-#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
-
-/*
- * SPI test
- *
- * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
- * The interface is configured accordingly and several packets
- * are transfered. The configurable test parameters are:
- * TEST_MIN_LENGTH - minimum size of packet to transfer
- * TEST_MAX_LENGTH - maximum size of packet to transfer
- * TEST_NUM - number of tests
- */
-
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
-
-#define TEST_MIN_LENGTH 1
-#define TEST_MAX_LENGTH MAX_BUFFER
-#define TEST_NUM 1
-
-static void packet_fill (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++)
- {
- packet[i] = c++;
- }
-}
-
-static int packet_check (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++) {
- if (packet[i] != c++) return -1;
- }
-
- return 0;
-}
-
-int spi_post_test (int flags)
-{
- int res = -1;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
- int i;
- int l;
-
- spi_init_f ();
- spi_init_r ();
-
- cp->cp_spmode |= SPMODE_LOOP;
-
- for (i = 0; i < TEST_NUM; i++) {
- for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
- packet_fill ((char *)txbuf, l);
-
- spi_xfer (l);
-
- if (packet_check ((char *)rxbuf, l) < 0) {
- goto Done;
- }
- }
- }
-
- res = 0;
-
- Done:
-
- cp->cp_spmode &= ~SPMODE_LOOP;
-
- /*
- * SCC2 parameter RAM space overlaps
- * the SPI parameter RAM space. So we need to restore
- * the SCC2 configuration if it is used by UART.
- */
-
-#if !defined(CONFIG_8xx_CONS_NONE)
- serial_reinit_all ();
-#endif
-
- if (res != 0) {
- post_log ("SPI test failed\n");
- }
-
- return res;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating,
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memory map.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <mpc8xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_8xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
- mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- /* Initialize debug port registers */
- /*----------------------------------------------------------------------*/
- xor r0, r0, r0 /* Clear R0 */
- mtspr LCTRL1, r0 /* Initialize debug port regs */
- mtspr LCTRL2, r0
- mtspr COUNTA, r0
- mtspr COUNTB, r0
-
- /* Reset the caches */
- /*----------------------------------------------------------------------*/
-
- mfspr r3, IC_CST /* Clear error bits */
- mfspr r3, DC_CST
-
- lis r3, IDC_UNALL@h /* Unlock all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_INVALL@h /* Invalidate all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_DISABLE@h /* Disable data cache */
- mtspr DC_CST, r3
-
-#if !defined(CONFIG_SYS_DELAYED_ICACHE)
- /* On IP860 and PCU E,
- * we cannot enable IC yet
- */
- lis r3, IDC_ENABLE@h /* Enable instruction cache */
-#endif
- mtspr IC_CST, r3
-
- /* invalidate all tlb's */
- /*----------------------------------------------------------------------*/
-
- tlbia
- isync
-
- /*
- * Calculate absolute address in FLASH and jump there
- *----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-
- /* initialize some SPRs that are hard to access from C */
- /*----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
- /* Note: R0 is still 0 here */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /*
- * Disable serialized ifetch and show cycles
- * (i.e. set processor to normal mode).
- * This is also a silicon bug workaround, see errata
- */
-
- li r2, 0x0007
- mtspr ICTRL, r2
-
- /* Set up debug mode entry */
-
- lis r2, CONFIG_SYS_DER@h
- ori r2, r2, CONFIG_SYS_DER@l
- mtspr DER, r2
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- SYNC
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- lis r3, IDC_ENABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_disable
-icache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, IC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
-#if 0
- SYNC
-#endif
-#if 1
- lis r3, 0x0400 /* Set cache mode with MMU off */
- mtspr MD_CTR, r3
-#endif
-
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
-#if 0
- lis r3, DC_SFWT@h
- mtspr DC_CST, r3
-#endif
- lis r3, IDC_ENABLE@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr DC_CST, r3
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, DC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dc_read
-dc_read:
- mtspr DC_ADR, r3
- mfspr r3, DC_DAT
- blr
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
- .globl get_immr
-get_immr:
- mr r4,r3 /* save mask */
- mfspr r3, IMMR /* IMMR */
- cmpwi 0,r4,0 /* mask != 0 ? */
- beq 4f
- and r3,r3,r4 /* IMMR & mask */
-4:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
- .globl wr_ic_cst
-wr_ic_cst:
- mtspr IC_CST, r3
- blr
-
- .globl rd_ic_cst
-rd_ic_cst:
- mfspr r3, IC_CST
- blr
-
- .globl wr_ic_adr
-wr_ic_adr:
- mtspr IC_ADR, r3
- blr
-
-
- .globl wr_dc_cst
-wr_dc_cst:
- mtspr DC_CST, r3
- blr
-
- .globl rd_dc_cst
-rd_dc_cst:
- mfspr r3, DC_CST
- blr
-
- .globl wr_dc_adr
-wr_dc_adr:
- mtspr DC_ADR, r3
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-#include <common.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-
-static void UcodeCopy (volatile cpm8xx_t *cpm);
-
-void cpm_load_patch (volatile immap_t *immr)
-{
- immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
-
- UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- {
- volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SPI parameters (not I2C). */
- immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
- spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
- }
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- {
- volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the I2C parameters (not SPI). */
- immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
- immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
- iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
- }
-#endif
-
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- {
- volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SMC parameters. */
- immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
- up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
- }
-#endif
-
- /*
- * Enable DPRAM microcode to execute from the first 512 bytes
- * and a 256 byte extension of DPRAM.
- */
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- immr->im_cpm.cp_rccr |= 0x0002;
-#else
- immr->im_cpm.cp_rccr |= 0x0001;
-#endif
-}
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
-static ulong patch_2000[] = {
- 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
- 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
- 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
- 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
- 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
- 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
- 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
- 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
- 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
- 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
- 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
- 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
- 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
- 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
- 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
- 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
- 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
- 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
- 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
- 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
- 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
- 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
- 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
- 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
- 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
- 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
- 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
- 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
- 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
- 0x7FBDB081, 0x5F8147F8,
-};
-
-static ulong patch_2F00[] = {
- 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
- 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
- 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
- 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
- 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
- 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
- 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
- 0x19797937, 0x69350000,
-};
-#else
-
-static ulong patch_2000[] = {
- 0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
- 0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
- 0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
- 0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
- 0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
- 0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
- 0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
- 0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
- 0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
- 0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
- 0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
- 0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
- 0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
- 0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
- 0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
- 0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
- 0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
- 0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
- 0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
- 0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
- 0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
- 0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
- 0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
- 0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
- 0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
- 0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
- 0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
- 0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
- 0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
- 0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
- 0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
- 0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
- 0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
- 0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
- 0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
- 0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
- 0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
- 0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
- 0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
- 0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
- 0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
- 0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
- 0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
- 0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
- 0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
- 0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
- 0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
- 0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
- 0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
- 0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
- 0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
- 0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
- 0xe2bb2ff9, 0x6079e2bb,
-};
-
-static ulong patch_2F00[] = {
- 0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
- 0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
- 0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
- 0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
- 0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
- 0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
- 0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
- 0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
- 0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
- 0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
- 0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
- 0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
- 0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
- 0xf22f0000,
-};
-#endif
-
-static void UcodeCopy (volatile cpm8xx_t *cpm)
-{
- vu_long *p;
- int i;
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
- for (i=0; i < sizeof(patch_2000)/4; ++i) {
- p[i] = patch_2000[i];
- }
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
- for (i=0; i < sizeof(patch_2F00)/4; ++i) {
- p[i] = patch_2F00[i];
- }
-}
-
-#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- * (C) Copyright 2002
- * Wolfgang Denk, wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
-#include <stdarg.h>
-#include <common.h>
-#include <config.h>
-#include <version.h>
-#include <timestamp.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#ifdef CONFIG_VIDEO
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/************************************************************************/
-/* ** DEBUG SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_DEBUG_COLORBARS /* Force colorbars output */
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_MODE_EXTENDED /* Allow screen size bigger than visible area */
-#define VIDEO_MODE_NTSC
-#endif
-
-#define VIDEO_MODE_PAL
-
-#if 0
-#define VIDEO_BLINK /* This enables cursor blinking (under construction) */
-#endif
-
-#define VIDEO_INFO /* Show U-Boot information */
-#define VIDEO_INFO_X VIDEO_LOGO_WIDTH+8
-#define VIDEO_INFO_Y 16
-
-/************************************************************************/
-/* ** VIDEO ENCODER CONSTANTS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7176
-
-#include <video_ad7176.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7176_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7177
-
-#include <video_ad7177.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7177_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7179
-
-#include <video_ad7179.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7179_ADDR
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE CONSTANTS */
-/************************************************************************/
-
-#ifdef VIDEO_MODE_EXTENDED
-#define VIDEO_COLS VIDEO_ACTIVE_COLS
-#define VIDEO_ROWS VIDEO_ACTIVE_ROWS
-#else
-#define VIDEO_COLS VIDEO_VISIBLE_COLS
-#define VIDEO_ROWS VIDEO_VISIBLE_ROWS
-#endif
-
-#define VIDEO_PIXEL_SIZE (VIDEO_MODE_BPP/8)
-#define VIDEO_SIZE (VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Total size of buffer */
-#define VIDEO_PIX_BLOCKS (VIDEO_SIZE >> 2) /* Number of ints */
-#define VIDEO_LINE_LEN (VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Number of bytes per line */
-#define VIDEO_BURST_LEN (VIDEO_COLS/8)
-
-#ifdef VIDEO_MODE_YUYV
-#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
-#else
-#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
-#endif
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA */
-/************************************************************************/
-
-#include <video_font.h> /* Get font data, width and height */
-
-#ifdef CONFIG_VIDEO_LOGO
-#include <video_logo.h> /* Get logo data, width and height */
-
-#define VIDEO_LOGO_WIDTH DEF_U_BOOT_LOGO_WIDTH
-#define VIDEO_LOGO_HEIGHT DEF_U_BOOT_LOGO_HEIGHT
-#define VIDEO_LOGO_ADDR &u_boot_logo
-#endif
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER CONSTANTS */
-/************************************************************************/
-
-/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */
-
-#define VIDEO_VCCR_VON 0 /* Video controller ON */
-#define VIDEO_VCCR_CSRC 1 /* Clock source */
-#define VIDEO_VCCR_PDF 13 /* Pixel display format */
-#define VIDEO_VCCR_IEN 11 /* Interrupt enable */
-
-/* VSR - VIDEO STATUS REGISTER */
-
-#define VIDEO_VSR_CAS 6 /* Active set */
-#define VIDEO_VSR_EOF 0 /* End of frame */
-
-/* VCMR - VIDEO COMMAND REGISTER */
-
-#define VIDEO_VCMR_BD 0 /* Blank display */
-#define VIDEO_VCMR_ASEL 1 /* Active set selection */
-
-/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */
-
-#define VIDEO_BCSR4_RESET_BIT 21 /* BCSR4 - Extern video encoder reset */
-#define VIDEO_BCSR4_EXTCLK_BIT 22 /* BCSR4 - Extern clock enable */
-#define VIDEO_BCSR4_VIDLED_BIT 23 /* BCSR4 - Video led disable */
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
-#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
-#else
-#define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT)
-#endif
-
-#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
-#define CONSOLE_ROW_FIRST (video_console_address)
-#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK 0
-#define CONSOLE_COLOR_RED 1
-#define CONSOLE_COLOR_GREEN 2
-#define CONSOLE_COLOR_YELLOW 3
-#define CONSOLE_COLOR_BLUE 4
-#define CONSOLE_COLOR_MAGENTA 5
-#define CONSOLE_COLOR_CYAN 6
-#define CONSOLE_COLOR_GREY 13
-#define CONSOLE_COLOR_GREY2 14
-#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
-
-/************************************************************************/
-/* ** BITOPS MACROS */
-/************************************************************************/
-
-#define HISHORT(i) ((i >> 16)&0xffff)
-#define LOSHORT(i) (i & 0xffff)
-#define HICHAR(s) ((i >> 8)&0xff)
-#define LOCHAR(s) (i & 0xff)
-#define HI(c) ((c >> 4)&0xf)
-#define LO(c) (c & 0xf)
-#define SWAPINT(i) (HISHORT(i) | (LOSHORT(i) << 16))
-#define SWAPSHORT(s) (HICHAR(s) | (LOCHAR(s) << 8))
-#define SWAPCHAR(c) (HI(c) | (LO(c) << 4))
-#define BITMASK(b) (1 << (b))
-#define GETBIT(v,b) (((v) & BITMASK(b)) > 0)
-#define SETBIT(v,b,d) (v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b)))
-
-/************************************************************************/
-/* ** STRUCTURES */
-/************************************************************************/
-
-typedef struct {
- unsigned char V, Y1, U, Y2;
-} tYUYV;
-
-/* This structure is based on the Video Ram in the MPC823. */
-typedef struct VRAM {
- unsigned hx:2, /* Horizontal sync */
- vx:2, /* Vertical sync */
- fx:2, /* Frame */
- bx:2, /* Blank */
- res1:6, /* Reserved */
- vds:2, /* Video Data Select */
- inter:1, /* Interrupt */
- res2:2, /* Reserved */
- lcyc:11, /* Loop/video cycles */
- lp:1, /* Loop start/end */
- lst:1; /* Last entry */
-} VRAM;
-
-/************************************************************************/
-/* ** VARIABLES */
-/************************************************************************/
-
-static int
- video_panning_range_x = 0, /* Video mode invisible pixels x range */
- video_panning_range_y = 0, /* Video mode invisible pixels y range */
- video_panning_value_x = 0, /* Video mode x panning value (absolute) */
- video_panning_value_y = 0, /* Video mode y panning value (absolute) */
- video_panning_factor_x = 0, /* Video mode x panning value (-127 +127) */
- video_panning_factor_y = 0, /* Video mode y panning value (-127 +127) */
- console_col = 0, /* Cursor col */
- console_row = 0, /* Cursor row */
- video_palette[16]; /* Our palette */
-
-static const int video_font_draw_table[] =
- { 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff };
-
-static char
- video_color_fg = 0, /* Current fg color index (0-15) */
- video_color_bg = 0, /* Current bg color index (0-15) */
- video_enable = 0; /* Video has been initialized? */
-
-static void
- *video_fb_address, /* Frame buffer address */
- *video_console_address; /* Console frame buffer start address */
-
-/************************************************************************/
-/* ** MEMORY FUNCTIONS (32bit) */
-/************************************************************************/
-
-static void memsetl (int *p, int c, int v)
-{
- while (c--)
- *(p++) = v;
-}
-
-static void memcpyl (int *d, int *s, int c)
-{
- while (c--)
- *(d++) = *(s++);
-}
-
-/************************************************************************/
-/* ** VIDEO DRAWING AND COLOR FUNCTIONS */
-/************************************************************************/
-
-static int video_maprgb (int r, int g, int b)
-{
-#ifdef VIDEO_MODE_YUYV
- unsigned int pR, pG, pB;
- tYUYV YUYV;
- unsigned int *ret = (unsigned int *) &YUYV;
-
- /* Transform (0-255) components to (0-100) */
-
- pR = r * 100 / 255;
- pG = g * 100 / 255;
- pB = b * 100 / 255;
-
- /* Calculate YUV values (0-255) from RGB beetween 0-100 */
-
- YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
- YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
- YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
- return *ret;
-#endif
-#ifdef VIDEO_MODE_RGB
- return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3);
-#endif
-}
-
-static void video_setpalette (int color, int r, int g, int b)
-{
- color &= 0xf;
-
- video_palette[color] = video_maprgb (r, g, b);
-
- /* Swap values if our panning offset is odd */
- if (video_panning_value_x & 1)
- video_palette[color] = SWAPINT (video_palette[color]);
-}
-
-static void video_fill (int color)
-{
- memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color);
-}
-
-static void video_setfgcolor (int i)
-{
- video_color_fg = i & 0xf;
-}
-
-static void video_setbgcolor (int i)
-{
- video_color_bg = i & 0xf;
-}
-
-static int video_pickcolor (int i)
-{
- return video_palette[i & 0xf];
-}
-
-/* Absolute console plotting functions */
-
-#ifdef VIDEO_BLINK
-static void video_revchar (int xx, int yy)
-{
- int rows;
- u8 *dest;
-
- dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2;
-
- for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) {
- switch (VIDEO_FONT_WIDTH) {
- case 16:
- ((u32 *) dest)[6] ^= 0xffffffff;
- ((u32 *) dest)[7] ^= 0xffffffff;
- /* FALL THROUGH */
- case 12:
- ((u32 *) dest)[4] ^= 0xffffffff;
- ((u32 *) dest)[5] ^= 0xffffffff;
- /* FALL THROUGH */
- case 8:
- ((u32 *) dest)[2] ^= 0xffffffff;
- ((u32 *) dest)[3] ^= 0xffffffff;
- /* FALL THROUGH */
- case 4:
- ((u32 *) dest)[0] ^= 0xffffffff;
- ((u32 *) dest)[1] ^= 0xffffffff;
- }
- }
-}
-#endif
-
-static void video_drawchars (int xx, int yy, unsigned char *s, int count)
-{
- u8 *cdat, *dest, *dest0;
- int rows, offset, c;
- u32 eorx, fgx, bgx;
-
- offset = yy * VIDEO_LINE_LEN + xx * 2;
- dest0 = video_fb_address + offset;
-
- fgx = video_pickcolor (video_color_fg);
- bgx = video_pickcolor (video_color_bg);
-
- if (xx & 1) {
- fgx = SWAPINT (fgx);
- bgx = SWAPINT (bgx);
- }
-
- eorx = fgx ^ bgx;
-
- switch (VIDEO_FONT_WIDTH) {
- case 4:
- case 8:
- while (count--) {
- c = *s;
- cdat = video_fontdata + c * VIDEO_FONT_HEIGHT;
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0;
- rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 8) {
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- dest0 += VIDEO_FONT_WIDTH * 2;
- s++;
- }
- break;
- case 12:
- case 16:
- while (count--) {
- cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1);
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- bits = *cdat++;
- ((u32 *) dest)[4] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[5] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 16) {
- ((u32 *) dest)[6] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[7] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- s++;
- dest0 += VIDEO_FONT_WIDTH * 2;
- }
- break;
- }
-}
-
-static inline void video_drawstring (int xx, int yy, char *s)
-{
- video_drawchars (xx, yy, (unsigned char *)s, strlen (s));
-}
-
-/* Relative to console plotting functions */
-
-static void video_putchars (int xx, int yy, unsigned char *s, int count)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count);
-#else
- video_drawchars (xx, yy, s, count);
-#endif
-}
-
-static void video_putchar (int xx, int yy, unsigned char c)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
-#else
- video_drawchars (xx, yy, &c, 1);
-#endif
-}
-
-static inline void video_putstring (int xx, int yy, unsigned char *s)
-{
- video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s));
-}
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
-/************************************************************************/
-
-#if !defined(CONFIG_RRVISION)
-static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
-{
- int i;
-
- for (i = 0; i < entries; i++) {
- dest[i] = source[i]; /* Copy the entire record */
- dest[i].fx = (!dest[i].fx) * 3; /* Negate field bit */
- }
-
- dest[0].lcyc++; /* Add a cycle to the first entry */
- dest[entries - 1].lst = 1; /* Set end of ram entries */
-}
-#endif
-
-static void inline video_mode_addentry (VRAM * vr,
- int Hx, int Vx, int Fx, int Bx,
- int VDS, int INT, int LCYC, int LP, int LST)
-{
- vr->hx = Hx;
- vr->vx = Vx;
- vr->fx = Fx;
- vr->bx = Bx;
- vr->vds = VDS;
- vr->inter = INT;
- vr->lcyc = LCYC;
- vr->lp = LP;
- vr->lst = LST;
-}
-
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
-
-static int video_mode_generate (void)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- VRAM *vr = (VRAM *) (((void *) immap) + 0xb00); /* Pointer to the VRAM table */
- int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
-
- /* CHECKING PARAMETERS */
-
- if (video_panning_factor_y < -128)
- video_panning_factor_y = -128;
-
- if (video_panning_factor_y > 128)
- video_panning_factor_y = 128;
-
- if (video_panning_factor_x < -128)
- video_panning_factor_x = -128;
-
- if (video_panning_factor_x > 128)
- video_panning_factor_x = 128;
-
- /* Setting panning */
-
- DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2;
- DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2;
-
- video_panning_value_x = (video_panning_factor_x + 128) * DX / 256;
- video_panning_value_y = (video_panning_factor_y + 128) * DY / 256;
-
- /* We assume these are burst units (multiplied by 2, we need it pari) */
- X1 = video_panning_value_x & 0xfffe;
- X2 = DX - X1;
-
- /* We assume these are field line units (divided by 2, we need it pari) */
- Y1 = video_panning_value_y & 0xfffe;
- Y2 = DY - Y1;
-
- debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
- X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
-
-#ifdef VIDEO_MODE_NTSC
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * Retrace blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Odd field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Odd field active area
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-
-/*
- * Odd field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Even field active area (CENTER)
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1);
-#endif
-
-#ifdef VIDEO_MODE_PAL
-
-#if defined(CONFIG_RRVISION)
-
-#define HPW 160 /* horizontal pulse width (was 139) */
-#define VPW 2 /* vertical pulse width */
-#define HBP 104 /* horizontal back porch (was 112) */
-#define VBP 19 /* vertical back porch (was 19) */
-#define VID_R 240 /* number of rows */
-
- debug ("[VIDEO CTRL] Starting to add controller entries...");
-/*
- * Even field
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
- ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
- ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-/*
- * Odd field
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
- ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
- ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-
- debug ("done\n");
-
-#else /* !CONFIG_RRVISION */
-
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); /* 11? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field active area (CENTER)
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0); /* 265? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * field active area (BOTTOM)
- */
- if (Y2 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); /* 12? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * Create the other field (like this, but whit other field selected,
- * one more cycle loop and a last identifier)
- */
- video_mode_dupefield (vr, &vr[entry], entry);
-#endif /* CONFIG_RRVISION */
-
-#endif /* VIDEO_MODE_PAL */
-
- /* See what FIFO are we using */
- fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
-
- /* Set number of lines and burst (only one frame for now) */
- if (fifo) {
- immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- } else {
- immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- }
-
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo);
-
-/*
- * Wait until changes are applied (not done)
- * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ;
- */
-
- /* Return number of VRAM entries */
- return entry * 2;
-}
-
-static void video_encoder_init (void)
-{
-#ifdef VIDEO_I2C
- int rc;
-
- /* Initialize the I2C */
- debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-#ifdef CONFIG_FADS
- /* Reset ADV7176 chip */
- debug ("[VIDEO ENCODER] Resetting encoder...\n");
- (*(int *) BCSR4) &= ~(1 << 21);
-
- /* Wait for 5 ms inside the reset */
- debug ("[VIDEO ENCODER] Waiting for encoder reset...\n");
- udelay (5000);
-
- /* Take ADV7176 out of reset */
- (*(int *) BCSR4) |= 1 << 21;
-
- /* Wait for 5 ms after the reset */
- udelay (5000);
-#endif /* CONFIG_FADS */
-
- /* Send configuration */
-#ifdef DEBUG
- {
- int i;
-
- puts ("[VIDEO ENCODER] Configuring the encoder...\n");
-
- printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ",
- sizeof(video_encoder_data),
- (ulong)video_encoder_data,
- (ulong)VIDEO_I2C_ADDR);
- for (i=0; i<sizeof(video_encoder_data); ++i) {
- printf(" %02X", video_encoder_data[i]);
- }
- putc ('\n');
- }
-#endif /* DEBUG */
-
- if ((rc = i2c_write (VIDEO_I2C_ADDR, 0, 1,
- video_encoder_data,
- sizeof(video_encoder_data))) != 0) {
- printf ("i2c_send error: rc=%d\n", rc);
- return;
- }
-#endif /* VIDEO_I2C */
- return;
-}
-
-static void video_ctrl_init (void *memptr)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- video_fb_address = memptr;
-
- /* Set background */
- debug ("[VIDEO CTRL] Setting background color...\n");
- immap->im_vid.vid_vbcb = VIDEO_BG_COL;
-
- /* Show the background */
- debug ("[VIDEO CTRL] Forcing background...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1);
-
- /* Turn off video controller */
- debug ("[VIDEO CTRL] Turning off video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
-
-#ifdef CONFIG_FADS
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning off video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 1);
-
- /* Disable internal clock */
- debug ("[VIDEO CTRL] Disabling internal clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 0);
-#endif
-
- /* Generate and make active a new video mode */
- debug ("[VIDEO CTRL] Generating video mode...\n");
- video_mode_generate ();
-
- /* Start of frame buffer (even and odd frame, to make it working with */
- /* any selected active set) */
- debug ("[VIDEO CTRL] Setting frame buffer address...\n");
- immap->im_vid.vid_vfaa1 =
- immap->im_vid.vid_vfaa0 = (u32) video_fb_address;
- immap->im_vid.vid_vfba1 =
- immap->im_vid.vid_vfba0 =
- (u32) video_fb_address + VIDEO_LINE_LEN;
-
- /* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */
- debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n");
- immap->im_vid.vid_vccr = 0x2042;
-
- /* Configure port pins */
- debug ("[VIDEO CTRL] Configuring input/output pins...\n");
- immap->im_ioport.iop_pdpar = 0x1fff;
- immap->im_ioport.iop_pddir = 0x0000;
-
-#ifdef CONFIG_FADS
- /* Turn on Video Port Clock - ONLY AFTER SET VCCR TO ENABLE EXTERNAL CLOCK */
- debug ("[VIDEO CTRL] Turning on video clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 1);
-
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning on video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
-#endif
-#ifdef CONFIG_RRVISION
- debug ("PC5->Output(1): enable PAL clock");
- immap->im_ioport.iop_pcpar &= ~(0x0400);
- immap->im_ioport.iop_pcdir |= 0x0400 ;
- immap->im_ioport.iop_pcdat |= 0x0400 ;
- debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
- immap->im_ioport.iop_pdpar,
- immap->im_ioport.iop_pddir,
- immap->im_ioport.iop_pddat);
- debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
- immap->im_ioport.iop_pcpar,
- immap->im_ioport.iop_pcdir,
- immap->im_ioport.iop_pcdat);
-#endif /* CONFIG_RRVISION */
-
- /* Blanking the screen. */
- debug ("[VIDEO CTRL] Blanking the screen...\n");
- video_fill (VIDEO_BG_COL);
-
- /*
- * Turns on Aggressive Mode. Normally, turning on the caches
- * will cause the screen to flicker when the caches try to
- * fill. This gives the FIFO's for the Video Controller
- * higher priority and prevents flickering because of
- * underrun. This may still be an issue when using FLASH,
- * since accessing data from Flash is so slow.
- */
- debug ("[VIDEO CTRL] Turning on aggressive mode...\n");
- immap->im_siu_conf.sc_sdcr = 0x40;
-
- /* Turn on video controller */
- debug ("[VIDEO CTRL] Turning on video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1);
-
- /* Show the display */
- debug ("[VIDEO CTRL] Enabling the video...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0);
-}
-
-/************************************************************************/
-/* ** CONSOLE FUNCTIONS */
-/************************************************************************/
-
-static void console_scrollup (void)
-{
- /* Copy up rows ignoring the first one */
- memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2);
-
- /* Clear the last one */
- memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL);
-}
-
-static inline void console_back (void)
-{
- console_col--;
-
- if (console_col < 0) {
- console_col = CONSOLE_COLS - 1;
- console_row--;
- if (console_row < 0)
- console_row = 0;
- }
-
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, ' ');
-}
-
-static inline void console_newline (void)
-{
- console_row++;
- console_col = 0;
-
- /* Check if we need to scroll the terminal */
- if (console_row >= CONSOLE_ROWS) {
- /* Scroll everything up */
- console_scrollup ();
-
- /* Decrement row number */
- console_row--;
- }
-}
-
-void video_putc (const char c)
-{
- if (!video_enable) {
- serial_putc (c);
- return;
- }
-
- switch (c) {
- case 13: /* Simply ignore this */
- break;
-
- case '\n': /* Next line, please */
- console_newline ();
- break;
-
- case 9: /* Tab (8 chars alignment) */
- console_col |= 0x0008; /* Next 8 chars boundary */
- console_col &= ~0x0007; /* Set this bit to zero */
-
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- break;
-
- case 8: /* Eat last character */
- console_back ();
- break;
-
- default: /* Add to the console */
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, c);
- console_col++;
- /* Check if we need to go to next row */
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- }
-}
-
-void video_puts (const char *s)
-{
- int count = strlen (s);
-
- if (!video_enable)
- while (count--)
- serial_putc (*s++);
- else
- while (count--)
- video_putc (*s++);
-}
-
-/************************************************************************/
-/* ** CURSOR BLINKING FUNCTIONS */
-/************************************************************************/
-
-#ifdef VIDEO_BLINK
-
-#define BLINK_TIMER_ID 0
-#define BLINK_TIMER_HZ 2
-
-static unsigned char blink_enabled = 0;
-static timer_t blink_timer;
-
-static void blink_update (void)
-{
- static int blink_row = -1, blink_col = -1, blink_old = 0;
-
- /* Check if we have a new position to invert */
- if ((console_row != blink_row) || (console_col != blink_col)) {
- /* Check if we need to reverse last character */
- if (blink_old)
- video_revchar ( blink_col * VIDEO_FONT_WIDTH,
- (blink_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
- /* Update values */
- blink_row = console_row;
- blink_col = console_col;
- blink_old = 0;
- }
-
-/* Reverse this character */
- blink_old = !blink_old;
- video_revchar ( console_col * VIDEO_FONT_WIDTH,
- (console_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
-}
-
-/*
- * Handler for blinking cursor
- */
-static void blink_handler (void *arg)
-{
-/* Blink */
- blink_update ();
-/* Ack the timer */
- timer_ack (&blink_timer);
-}
-
-int blink_set (int blink)
-{
- int ret = blink_enabled;
-
- if (blink)
- timer_enable (&blink_timer);
- else
- timer_disable (&blink_timer);
-
- blink_enabled = blink;
-
- return ret;
-}
-
-static inline void blink_close (void)
-{
- timer_close (&blink_timer);
-}
-
-static inline void blink_init (void)
-{
- timer_init (&blink_timer,
- BLINK_TIMER_ID, BLINK_TIMER_HZ,
- blink_handler);
-}
-#endif
-
-/************************************************************************/
-/* ** LOGO PLOTTING FUNCTIONS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-void easylogo_plot (fastimage_t * image, void *screen, int width, int x,
- int y)
-{
- int skip = width - image->width, xcount, ycount = image->height;
-
-#ifdef VIDEO_MODE_YUYV
- ushort *source = (ushort *) image->data;
- ushort *dest = (ushort *) screen + y * width + x;
-
- while (ycount--) {
- xcount = image->width;
- while (xcount--)
- *dest++ = *source++;
- dest += skip;
- }
-#endif
-#ifdef VIDEO_MODE_RGB
- unsigned char
- *source = (unsigned short *) image->data,
- *dest = (unsigned short *) screen + ((y * width) + x) * 3;
-
- while (ycount--) {
- xcount = image->width * 3;
- memcpy (dest, source, xcount);
- source += xcount;
- dest += ycount;
- }
-#endif
-}
-
-static void *video_logo (void)
-{
- u16 *screen = video_fb_address, width = VIDEO_COLS;
-#ifdef VIDEO_INFO
-# ifndef CONFIG_FADS
- char temp[32];
-# endif
- char info[80];
-#endif /* VIDEO_INFO */
-
- easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
-
-#ifdef VIDEO_INFO
- sprintf (info, "%s (%s - %s) ",
- U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
-
- sprintf (info, "(C) 2002 DENX Software Engineering");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- sprintf (info, " Wolfgang DENK, wd@denx.de");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-#ifndef CONFIG_FADS /* all normal boards */
- /* leave one blank line */
-
- sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- info);
-#else /* FADS :-( */
- sprintf (info, "MPC823 CPU at 50 MHz on FADS823 board");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-#endif
-#endif
-
- return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;
-}
-#endif
-
-/************************************************************************/
-/* ** VIDEO HIGH-LEVEL FUNCTIONS */
-/************************************************************************/
-
-static int video_init (void *videobase)
-{
- /* Initialize the encoder */
- debug ("[VIDEO] Initializing video encoder...\n");
- video_encoder_init ();
-
- /* Initialize the video controller */
- debug ("[VIDEO] Initializing video controller at %08x...\n",
- (int) videobase);
- video_ctrl_init (videobase);
-
- /* Setting the palette */
- video_setpalette (CONSOLE_COLOR_BLACK, 0, 0, 0);
- video_setpalette (CONSOLE_COLOR_RED, 0xFF, 0, 0);
- video_setpalette (CONSOLE_COLOR_GREEN, 0, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_BLUE, 0, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF);
- video_setpalette (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA);
- video_setpalette (CONSOLE_COLOR_GREY2, 0xF8, 0xF8, 0xF8);
- video_setpalette (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF);
-
-#ifndef CONFIG_SYS_WHITE_ON_BLACK
- video_setfgcolor (CONSOLE_COLOR_BLACK);
- video_setbgcolor (CONSOLE_COLOR_GREY2);
-#else
- video_setfgcolor (CONSOLE_COLOR_GREY2);
- video_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif /* CONFIG_SYS_WHITE_ON_BLACK */
-
-#ifdef CONFIG_VIDEO_LOGO
- /* Paint the logo and retrieve tv base address */
- debug ("[VIDEO] Drawing the logo...\n");
- video_console_address = video_logo ();
-#else
- video_console_address = video_fb_address;
-#endif
-
-#ifdef VIDEO_BLINK
- /* Enable the blinking (under construction) */
- blink_init ();
- blink_set (0); /* To Fix! */
-#endif
-
- /* Initialize the console */
- console_col = 0;
- console_row = 0;
- video_enable = 1;
-
-#ifdef VIDEO_MODE_PAL
-# define VIDEO_MODE_TMP1 "PAL"
-#endif
-#ifdef VIDEO_MODE_NTSC
-# define VIDEO_MODE_TMP1 "NTSC"
-#endif
-#ifdef VIDEO_MODE_YUYV
-# define VIDEO_MODE_TMP2 "YCbYCr"
-#endif
-#ifdef VIDEO_MODE_RGB
-# define VIDEO_MODE_TMP2 "RGB"
-#endif
- debug ( VIDEO_MODE_TMP1
- " %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n",
- VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP,
- VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS);
- return 0;
-}
-
-int drv_video_init (void)
-{
- int error, devices = 1;
-
- struct stdio_dev videodev;
-
- video_init ((void *)(gd->fb_base)); /* Video initialization */
-
-/* Device initialization */
-
- memset (&videodev, 0, sizeof (videodev));
-
- strcpy (videodev.name, "video");
- videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
- videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */
- videodev.putc = video_putc; /* 'putc' function */
- videodev.puts = video_puts; /* 'puts' function */
-
- error = stdio_register (&videodev);
-
- return (error == 0) ? devices : error;
-}
-
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory */
-/************************************************************************/
-
-/*
- * This is called early in the system initialization to grab memory
- * for the video controller.
- * Returns new address for monitor, after reserving video buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
- */
-ulong video_setmem (ulong addr)
-{
- /* Allocate pages for the frame buffer. */
- addr -= VIDEO_SIZE;
-
- debug ("Reserving %dk for Video Framebuffer at: %08lx\n",
- VIDEO_SIZE>>10, addr);
-
- return (addr);
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_WL_4PPM_KEYBOARD
-
-/* WIP: Wireless keyboard on SMC
- */
-int drv_wlkbd_init (void)
-{
- return 0 ;
-}
-
-#endif /* CONFIG_WL_4PPM_KEYBOARD */
+++ /dev/null
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib8xxx.a
-
-COBJS-y += cpu.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-$(CONFIG_PCI) += pci_cfg.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
+++ /dev/null
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * This file is derived from arch/ppc/cpu/mpc85xx/cpu.c and
- * arch/ppc/cpu/mpc86xx/cpu.c. Basically this file contains
- * cpu specific common code for 85xx/86xx processors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct cpu_type cpu_type_list [] = {
-#if defined(CONFIG_MPC85xx)
- CPU_TYPE_ENTRY(8533, 8533, 1),
- CPU_TYPE_ENTRY(8533, 8533_E, 1),
- CPU_TYPE_ENTRY(8535, 8535, 1),
- CPU_TYPE_ENTRY(8535, 8535_E, 1),
- CPU_TYPE_ENTRY(8536, 8536, 1),
- CPU_TYPE_ENTRY(8536, 8536_E, 1),
- CPU_TYPE_ENTRY(8540, 8540, 1),
- CPU_TYPE_ENTRY(8541, 8541, 1),
- CPU_TYPE_ENTRY(8541, 8541_E, 1),
- CPU_TYPE_ENTRY(8543, 8543, 1),
- CPU_TYPE_ENTRY(8543, 8543_E, 1),
- CPU_TYPE_ENTRY(8544, 8544, 1),
- CPU_TYPE_ENTRY(8544, 8544_E, 1),
- CPU_TYPE_ENTRY(8545, 8545, 1),
- CPU_TYPE_ENTRY(8545, 8545_E, 1),
- CPU_TYPE_ENTRY(8547, 8547_E, 1),
- CPU_TYPE_ENTRY(8548, 8548, 1),
- CPU_TYPE_ENTRY(8548, 8548_E, 1),
- CPU_TYPE_ENTRY(8555, 8555, 1),
- CPU_TYPE_ENTRY(8555, 8555_E, 1),
- CPU_TYPE_ENTRY(8560, 8560, 1),
- CPU_TYPE_ENTRY(8567, 8567, 1),
- CPU_TYPE_ENTRY(8567, 8567_E, 1),
- CPU_TYPE_ENTRY(8568, 8568, 1),
- CPU_TYPE_ENTRY(8568, 8568_E, 1),
- CPU_TYPE_ENTRY(8569, 8569, 1),
- CPU_TYPE_ENTRY(8569, 8569_E, 1),
- CPU_TYPE_ENTRY(8572, 8572, 2),
- CPU_TYPE_ENTRY(8572, 8572_E, 2),
- CPU_TYPE_ENTRY(P1011, P1011, 1),
- CPU_TYPE_ENTRY(P1011, P1011_E, 1),
- CPU_TYPE_ENTRY(P1012, P1012, 1),
- CPU_TYPE_ENTRY(P1012, P1012_E, 1),
- CPU_TYPE_ENTRY(P1013, P1013, 1),
- CPU_TYPE_ENTRY(P1013, P1013_E, 1),
- CPU_TYPE_ENTRY(P1020, P1020, 2),
- CPU_TYPE_ENTRY(P1020, P1020_E, 2),
- CPU_TYPE_ENTRY(P1021, P1021, 2),
- CPU_TYPE_ENTRY(P1021, P1021_E, 2),
- CPU_TYPE_ENTRY(P1022, P1022, 2),
- CPU_TYPE_ENTRY(P1022, P1022_E, 2),
- CPU_TYPE_ENTRY(P2010, P2010, 1),
- CPU_TYPE_ENTRY(P2010, P2010_E, 1),
- CPU_TYPE_ENTRY(P2020, P2020, 2),
- CPU_TYPE_ENTRY(P2020, P2020_E, 2),
- CPU_TYPE_ENTRY(P4040, P4040, 4),
- CPU_TYPE_ENTRY(P4040, P4040_E, 4),
- CPU_TYPE_ENTRY(P4080, P4080, 8),
- CPU_TYPE_ENTRY(P4080, P4080_E, 8),
-#elif defined(CONFIG_MPC86xx)
- CPU_TYPE_ENTRY(8610, 8610, 1),
- CPU_TYPE_ENTRY(8641, 8641, 2),
- CPU_TYPE_ENTRY(8641D, 8641D, 2),
-#endif
-};
-
-struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 1);
-
-struct cpu_type *identify_cpu(u32 ver)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) {
- if (cpu_type_list[i].soc_ver == ver)
- return &cpu_type_list[i];
- }
- return &cpu_type_unknown;
-}
-
-int cpu_numcores() {
- struct cpu_type *cpu;
- cpu = gd->cpu;
- return cpu->num_cores;
-}
-
-int probecpu (void)
-{
- uint svr;
- uint ver;
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
-
- gd->cpu = identify_cpu(ver);
-
- return 0;
-}
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_ETHER_ON_FCC)
- fec_initialize(bis);
-#endif
-
-#if defined(CONFIG_UEC_ETH)
- uec_standard_init(bis);
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
- tsec_standard_init(bis);
-#endif
-
- return 0;
-}
+++ /dev/null
-#
-# Copyright 2008 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)libddr.a
-
-COBJS-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o
-
-COBJS-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o
-
-COBJS-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef COMMON_TIMING_PARAMS_H
-#define COMMON_TIMING_PARAMS_H
-
-typedef struct {
- /* parameters to constrict */
-
- unsigned int tCKmin_X_ps;
- unsigned int tCKmax_ps;
- unsigned int tCKmax_max_ps;
- unsigned int tRCD_ps;
- unsigned int tRP_ps;
- unsigned int tRAS_ps;
-
- unsigned int tWR_ps; /* maximum = 63750 ps */
- unsigned int tWTR_ps; /* maximum = 63750 ps */
- unsigned int tRFC_ps; /* maximum = 255 ns + 256 ns + .75 ns
- = 511750 ps */
-
- unsigned int tRRD_ps; /* maximum = 63750 ps */
- unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
-
- unsigned int refresh_rate_ps;
-
- unsigned int tIS_ps; /* byte 32, spd->ca_setup */
- unsigned int tIH_ps; /* byte 33, spd->ca_hold */
- unsigned int tDS_ps; /* byte 34, spd->data_setup */
- unsigned int tDH_ps; /* byte 35, spd->data_hold */
- unsigned int tRTP_ps; /* byte 38, spd->trtp */
- unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
- unsigned int tQHS_ps; /* byte 45, spd->tqhs */
-
- unsigned int ndimms_present;
- unsigned int lowest_common_SPD_caslat;
- unsigned int highest_common_derated_caslat;
- unsigned int additive_latency;
- unsigned int all_DIMMs_burst_lengths_bitmask;
- unsigned int all_DIMMs_registered;
- unsigned int all_DIMMs_unbuffered;
- unsigned int all_DIMMs_ECC_capable;
-
- unsigned long long total_mem;
- unsigned long long base_address;
-} common_timing_params_t;
-
-#endif
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-extern unsigned int picos_to_mclk(unsigned int picos);
-/*
- * Determine Rtt value.
- *
- * This should likely be either board or controller specific.
- *
- * Rtt(nominal) - DDR2:
- * 0 = Rtt disabled
- * 1 = 75 ohm
- * 2 = 150 ohm
- * 3 = 50 ohm
- * Rtt(nominal) - DDR3:
- * 0 = Rtt disabled
- * 1 = 60 ohm
- * 2 = 120 ohm
- * 3 = 40 ohm
- * 4 = 20 ohm
- * 5 = 30 ohm
- *
- * FIXME: Apparently 8641 needs a value of 2
- * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
- *
- * FIXME: There was some effort down this line earlier:
- *
- * unsigned int i;
- * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
- * if (popts->dimmslot[i].num_valid_cs
- * && (popts->cs_local_opts[2*i].odt_rd_cfg
- * || popts->cs_local_opts[2*i].odt_wr_cfg)) {
- * rtt = 2;
- * break;
- * }
- * }
- */
-static inline int fsl_ddr_get_rtt(void)
-{
- int rtt;
-
-#if defined(CONFIG_FSL_DDR1)
- rtt = 0;
-#elif defined(CONFIG_FSL_DDR2)
- rtt = 3;
-#else
- rtt = 0;
-#endif
-
- return rtt;
-}
-
-/*
- * compute the CAS write latency according to DDR3 spec
- * CWL = 5 if tCK >= 2.5ns
- * 6 if 2.5ns > tCK >= 1.875ns
- * 7 if 1.875ns > tCK >= 1.5ns
- * 8 if 1.5ns > tCK >= 1.25ns
- */
-static inline unsigned int compute_cas_write_latency(void)
-{
- unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- if (mclk_ps >= 2500)
- cwl = 5;
- else if (mclk_ps >= 1875)
- cwl = 6;
- else if (mclk_ps >= 1500)
- cwl = 7;
- else if (mclk_ps >= 1250)
- cwl = 8;
- else
- cwl = 8;
- return cwl;
-}
-
-/* Chip Select Configuration (CSn_CONFIG) */
-static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const dimm_params_t *dimm_params)
-{
- unsigned int cs_n_en = 0; /* Chip Select enable */
- unsigned int intlv_en = 0; /* Memory controller interleave enable */
- unsigned int intlv_ctl = 0; /* Interleaving control */
- unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
- unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
- unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
- unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
- unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
- unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
-
- /* Compute CS_CONFIG only for existing ranks of each DIMM. */
- if ((((i&1) == 0)
- && (dimm_params[i/2].n_ranks == 1))
- || (dimm_params[i/2].n_ranks == 2)) {
- unsigned int n_banks_per_sdram_device;
- cs_n_en = 1;
- if (i == 0) {
- /* These fields only available in CS0_CONFIG */
- intlv_en = popts->memctl_interleaving;
- intlv_ctl = popts->memctl_interleaving_mode;
- }
- ap_n_en = popts->cs_local_opts[i].auto_precharge;
- odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
- odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
- n_banks_per_sdram_device
- = dimm_params[i/2].n_banks_per_sdram_device;
- ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
- row_bits_cs_n = dimm_params[i/2].n_row_addr - 12;
- col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
- }
-
- ddr->cs[i].config = (0
- | ((cs_n_en & 0x1) << 31)
- | ((intlv_en & 0x3) << 29)
- | ((intlv_ctl & 0xf) << 24)
- | ((ap_n_en & 0x1) << 23)
-
- /* XXX: some implementation only have 1 bit starting at left */
- | ((odt_rd_cfg & 0x7) << 20)
-
- /* XXX: Some implementation only have 1 bit starting at left */
- | ((odt_wr_cfg & 0x7) << 16)
-
- | ((ba_bits_cs_n & 0x3) << 14)
- | ((row_bits_cs_n & 0x7) << 8)
- | ((col_bits_cs_n & 0x7) << 0)
- );
- debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
-}
-
-/* Chip Select Configuration 2 (CSn_CONFIG_2) */
-/* FIXME: 8572 */
-static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int pasr_cfg = 0; /* Partial array self refresh config */
-
- ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
- debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
-}
-
-/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
-
-#if !defined(CONFIG_FSL_DDR1)
-/*
- * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
- *
- * Avoid writing for DDR I. The new PQ38 DDR controller
- * dreams up non-zero default values to be backwards compatible.
- */
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
- unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
- /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
- unsigned char trrt_mclk = 0; /* Read-to-read turnaround */
- unsigned char twwt_mclk = 0; /* Write-to-write turnaround */
-
- /* Active powerdown exit timing (tXARD and tXARDS). */
- unsigned char act_pd_exit_mclk;
- /* Precharge powerdown exit timing (tXP). */
- unsigned char pre_pd_exit_mclk;
- /* Precharge powerdown exit timing (tAXPD). */
- unsigned char taxpd_mclk;
- /* Mode register set cycle time (tMRD). */
- unsigned char tmrd_mclk;
-
-#if defined(CONFIG_FSL_DDR3)
- /*
- * (tXARD and tXARDS). Empirical?
- * The DDR3 spec has not tXARD,
- * we use the tXP instead of it.
- * tXP=max(3nCK, 7.5ns) for DDR3.
- * spec has not the tAXPD, we use
- * tAXPD=8, need design to confirm.
- */
- int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
- act_pd_exit_mclk = picos_to_mclk(tXP);
- /* Mode register MR0[A12] is '1' - fast exit */
- pre_pd_exit_mclk = act_pd_exit_mclk;
- taxpd_mclk = 8;
- tmrd_mclk = 4;
-#else /* CONFIG_FSL_DDR2 */
- /*
- * (tXARD and tXARDS). Empirical?
- * tXARD = 2 for DDR2
- * tXP=2
- * tAXPD=8
- */
- act_pd_exit_mclk = 2;
- pre_pd_exit_mclk = 2;
- taxpd_mclk = 8;
- tmrd_mclk = 2;
-#endif
-
- ddr->timing_cfg_0 = (0
- | ((trwt_mclk & 0x3) << 30) /* RWT */
- | ((twrt_mclk & 0x3) << 28) /* WRT */
- | ((trrt_mclk & 0x3) << 26) /* RRT */
- | ((twwt_mclk & 0x3) << 24) /* WWT */
- | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */
- | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */
- | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */
- | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */
- );
- debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
-}
-#endif /* defined(CONFIG_FSL_DDR2) */
-
-/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
-static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Extended Activate to precharge interval (tRAS) */
- unsigned int ext_acttopre = 0;
- unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */
- unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
- unsigned int cntl_adj = 0; /* Control Adjust */
-
- /* If the tRAS > 19 MCLK, we use the ext mode */
- if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13)
- ext_acttopre = 1;
-
- ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
-
- /* If the CAS latency more than 8, use the ext mode */
- if (cas_latency > 8)
- ext_caslat = 1;
-
- ddr->timing_cfg_3 = (0
- | ((ext_acttopre & 0x1) << 24)
- | ((ext_refrec & 0xF) << 16)
- | ((ext_caslat & 0x1) << 12)
- | ((cntl_adj & 0x7) << 0)
- );
- debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
-}
-
-/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
-static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Precharge-to-activate interval (tRP) */
- unsigned char pretoact_mclk;
- /* Activate to precharge interval (tRAS) */
- unsigned char acttopre_mclk;
- /* Activate to read/write interval (tRCD) */
- unsigned char acttorw_mclk;
- /* CASLAT */
- unsigned char caslat_ctrl;
- /* Refresh recovery time (tRFC) ; trfc_low */
- unsigned char refrec_ctrl;
- /* Last data to precharge minimum interval (tWR) */
- unsigned char wrrec_mclk;
- /* Activate-to-activate interval (tRRD) */
- unsigned char acttoact_mclk;
- /* Last write data pair to read command issue interval (tWTR) */
- unsigned char wrtord_mclk;
-
- pretoact_mclk = picos_to_mclk(common_dimm->tRP_ps);
- acttopre_mclk = picos_to_mclk(common_dimm->tRAS_ps);
- acttorw_mclk = picos_to_mclk(common_dimm->tRCD_ps);
-
- /*
- * Translate CAS Latency to a DDR controller field value:
- *
- * CAS Lat DDR I DDR II Ctrl
- * Clocks SPD Bit SPD Bit Value
- * ------- ------- ------- -----
- * 1.0 0 0001
- * 1.5 1 0010
- * 2.0 2 2 0011
- * 2.5 3 0100
- * 3.0 4 3 0101
- * 3.5 5 0110
- * 4.0 4 0111
- * 4.5 1000
- * 5.0 5 1001
- */
-#if defined(CONFIG_FSL_DDR1)
- caslat_ctrl = (cas_latency + 1) & 0x07;
-#elif defined(CONFIG_FSL_DDR2)
- caslat_ctrl = 2 * cas_latency - 1;
-#else
- /*
- * if the CAS latency more than 8 cycle,
- * we need set extend bit for it at
- * TIMING_CFG_3[EXT_CASLAT]
- */
- if (cas_latency > 8)
- cas_latency -= 8;
- caslat_ctrl = 2 * cas_latency - 1;
-#endif
-
- refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps);
- if (popts->OTF_burst_chop_en)
- wrrec_mclk += 2;
-
- acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps);
- /*
- * JEDEC has min requirement for tRRD
- */
-#if defined(CONFIG_FSL_DDR3)
- if (acttoact_mclk < 4)
- acttoact_mclk = 4;
-#endif
- wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps);
- /*
- * JEDEC has some min requirements for tWTR
- */
-#if defined(CONFIG_FSL_DDR2)
- if (wrtord_mclk < 2)
- wrtord_mclk = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (wrtord_mclk < 4)
- wrtord_mclk = 4;
-#endif
- if (popts->OTF_burst_chop_en)
- wrtord_mclk += 2;
-
- ddr->timing_cfg_1 = (0
- | ((pretoact_mclk & 0x0F) << 28)
- | ((acttopre_mclk & 0x0F) << 24)
- | ((acttorw_mclk & 0xF) << 20)
- | ((caslat_ctrl & 0xF) << 16)
- | ((refrec_ctrl & 0xF) << 12)
- | ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
- );
- debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
-}
-
-/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
-static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- /* Additive latency */
- unsigned char add_lat_mclk;
- /* CAS-to-preamble override */
- unsigned short cpo;
- /* Write latency */
- unsigned char wr_lat;
- /* Read to precharge (tRTP) */
- unsigned char rd_to_pre;
- /* Write command to write data strobe timing adjustment */
- unsigned char wr_data_delay;
- /* Minimum CKE pulse width (tCKE) */
- unsigned char cke_pls;
- /* Window for four activates (tFAW) */
- unsigned short four_act;
-
- /* FIXME add check that this must be less than acttorw_mclk */
- add_lat_mclk = additive_latency;
- cpo = popts->cpo_override;
-
-#if defined(CONFIG_FSL_DDR1)
- /*
- * This is a lie. It should really be 1, but if it is
- * set to 1, bits overlap into the old controller's
- * otherwise unused ACSM field. If we leave it 0, then
- * the HW will magically treat it as 1 for DDR 1. Oh Yea.
- */
- wr_lat = 0;
-#elif defined(CONFIG_FSL_DDR2)
- wr_lat = cas_latency - 1;
-#else
- wr_lat = compute_cas_write_latency();
-#endif
-
- rd_to_pre = picos_to_mclk(common_dimm->tRTP_ps);
- /*
- * JEDEC has some min requirements for tRTP
- */
-#if defined(CONFIG_FSL_DDR2)
- if (rd_to_pre < 2)
- rd_to_pre = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (rd_to_pre < 4)
- rd_to_pre = 4;
-#endif
- if (additive_latency)
- rd_to_pre += additive_latency;
- if (popts->OTF_burst_chop_en)
- rd_to_pre += 2; /* according to UM */
-
- wr_data_delay = popts->write_data_delay;
- cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
- four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
-
- ddr->timing_cfg_2 = (0
- | ((add_lat_mclk & 0xf) << 28)
- | ((cpo & 0x1f) << 23)
- | ((wr_lat & 0xf) << 19)
- | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT)
- | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT)
- | ((cke_pls & 0x7) << 6)
- | ((four_act & 0x3f) << 0)
- );
- debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
-}
-
-/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
-static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int mem_en; /* DDR SDRAM interface logic enable */
- unsigned int sren; /* Self refresh enable (during sleep) */
- unsigned int ecc_en; /* ECC enable. */
- unsigned int rd_en; /* Registered DIMM enable */
- unsigned int sdram_type; /* Type of SDRAM */
- unsigned int dyn_pwr; /* Dynamic power management mode */
- unsigned int dbw; /* DRAM dta bus width */
- unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */
- unsigned int ncap = 0; /* Non-concurrent auto-precharge */
- unsigned int threeT_en; /* Enable 3T timing */
- unsigned int twoT_en; /* Enable 2T timing */
- unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */
- unsigned int x32_en = 0; /* x32 enable */
- unsigned int pchb8 = 0; /* precharge bit 8 enable */
- unsigned int hse; /* Global half strength override */
- unsigned int mem_halt = 0; /* memory controller halt */
- unsigned int bi = 0; /* Bypass initialization */
-
- mem_en = 1;
- sren = popts->self_refresh_in_sleep;
- if (common_dimm->all_DIMMs_ECC_capable) {
- /* Allow setting of ECC only if all DIMMs are ECC. */
- ecc_en = popts->ECC_mode;
- } else {
- ecc_en = 0;
- }
-
- rd_en = (common_dimm->all_DIMMs_registered
- && !common_dimm->all_DIMMs_unbuffered);
-
- sdram_type = CONFIG_FSL_SDRAM_TYPE;
-
- dyn_pwr = popts->dynamic_power;
- dbw = popts->data_bus_width;
- /* 8-beat burst enable DDR-III case
- * we must clear it when use the on-the-fly mode,
- * must set it when use the 32-bits bus mode.
- */
- if (sdram_type == SDRAM_TYPE_DDR3) {
- if (popts->burst_length == DDR_BL8)
- eight_be = 1;
- if (popts->burst_length == DDR_OTF)
- eight_be = 0;
- if (dbw == 0x1)
- eight_be = 1;
- }
-
- threeT_en = popts->threeT_en;
- twoT_en = popts->twoT_en;
- ba_intlv_ctl = popts->ba_intlv_ctl;
- hse = popts->half_strength_driver_enable;
-
- ddr->ddr_sdram_cfg = (0
- | ((mem_en & 0x1) << 31)
- | ((sren & 0x1) << 30)
- | ((ecc_en & 0x1) << 29)
- | ((rd_en & 0x1) << 28)
- | ((sdram_type & 0x7) << 24)
- | ((dyn_pwr & 0x1) << 21)
- | ((dbw & 0x3) << 19)
- | ((eight_be & 0x1) << 18)
- | ((ncap & 0x1) << 17)
- | ((threeT_en & 0x1) << 16)
- | ((twoT_en & 0x1) << 15)
- | ((ba_intlv_ctl & 0x7F) << 8)
- | ((x32_en & 0x1) << 5)
- | ((pchb8 & 0x1) << 4)
- | ((hse & 0x1) << 3)
- | ((mem_halt & 0x1) << 1)
- | ((bi & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
-}
-
-/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
-static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int frc_sr = 0; /* Force self refresh */
- unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
- unsigned int dll_rst_dis; /* DLL reset disable */
- unsigned int dqs_cfg; /* DQS configuration */
- unsigned int odt_cfg; /* ODT configuration */
- unsigned int num_pr; /* Number of posted refreshes */
- unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
- unsigned int ap_en; /* Address Parity Enable */
- unsigned int d_init; /* DRAM data initialization */
- unsigned int rcw_en = 0; /* Register Control Word Enable */
- unsigned int md_en = 0; /* Mirrored DIMM Enable */
-
- dll_rst_dis = 1; /* Make this configurable */
- dqs_cfg = popts->DQS_config;
- if (popts->cs_local_opts[0].odt_rd_cfg
- || popts->cs_local_opts[0].odt_wr_cfg) {
- /* FIXME */
- odt_cfg = 2;
- } else {
- odt_cfg = 0;
- }
-
- num_pr = 1; /* Make this configurable */
-
- /*
- * 8572 manual says
- * {TIMING_CFG_1[PRETOACT]
- * + [DDR_SDRAM_CFG_2[NUM_PR]
- * * ({EXT_REFREC || REFREC} + 8 + 2)]}
- * << DDR_SDRAM_INTERVAL[REFINT]
- */
-#if defined(CONFIG_FSL_DDR3)
- obc_cfg = popts->OTF_burst_chop_en;
-#else
- obc_cfg = 0;
-#endif
-
- ap_en = 0; /* Make this configurable? */
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /* Use the DDR controller to auto initialize memory. */
- d_init = 1;
- ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
- debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
-#else
- /* Memory will be initialized via DMA, or not at all. */
- d_init = 0;
-#endif
-
-#if defined(CONFIG_FSL_DDR3)
- md_en = popts->mirrored_dimm;
-#endif
- ddr->ddr_sdram_cfg_2 = (0
- | ((frc_sr & 0x1) << 31)
- | ((sr_ie & 0x1) << 30)
- | ((dll_rst_dis & 0x1) << 29)
- | ((dqs_cfg & 0x3) << 26)
- | ((odt_cfg & 0x3) << 21)
- | ((num_pr & 0xf) << 12)
- | ((obc_cfg & 0x1) << 6)
- | ((ap_en & 0x1) << 5)
- | ((d_init & 0x1) << 4)
- | ((rcw_en & 0x1) << 2)
- | ((md_en & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
-}
-
-/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
- unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
-
-#if defined(CONFIG_FSL_DDR3)
- unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
- unsigned int srt = 0; /* self-refresh temerature, normal range */
- unsigned int asr = 0; /* auto self-refresh disable */
- unsigned int cwl = compute_cas_write_latency() - 5;
- unsigned int pasr = 0; /* partial array self refresh disable */
-
- if (popts->rtt_override)
- rtt_wr = popts->rtt_wr_override_value;
-
- esdmode2 = (0
- | ((rtt_wr & 0x3) << 9)
- | ((srt & 0x1) << 7)
- | ((asr & 0x1) << 6)
- | ((cwl & 0x7) << 3)
- | ((pasr & 0x7) << 0));
-#endif
- ddr->ddr_sdram_mode_2 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
-}
-
-/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
-static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int refint; /* Refresh interval */
- unsigned int bstopre; /* Precharge interval */
-
- refint = picos_to_mclk(common_dimm->refresh_rate_ps);
-
- bstopre = popts->bstopre;
-
- /* refint field used 0x3FFF in earlier controllers */
- ddr->ddr_sdram_interval = (0
- | ((refint & 0xFFFF) << 16)
- | ((bstopre & 0x3FFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
-}
-
-#if defined(CONFIG_FSL_DDR3)
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /* Mode Register - MR1 */
- unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */
- unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */
- unsigned int rtt;
- unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */
- unsigned int al = 0; /* Posted CAS# additive latency (AL) */
- unsigned int dic = 1; /* Output driver impedance, 34ohm */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register - MR0 */
- unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */
- unsigned int wr; /* Write Recovery */
- unsigned int dll_rst; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
- /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
- unsigned int wr_mclk;
-
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- rtt = fsl_ddr_get_rtt();
- if (popts->rtt_override)
- rtt = popts->rtt_override_value;
-
- if (additive_latency == (cas_latency - 1))
- al = 1;
- if (additive_latency == (cas_latency - 2))
- al = 2;
-
- /*
- * The esdmode value will also be used for writing
- * MR1 during write leveling for DDR3, although the
- * bits specifically related to the write leveling
- * scheme will be handled automatically by the DDR
- * controller. so we set the wrlvl_en = 0 here.
- */
- esdmode = (0
- | ((qoff & 0x1) << 12)
- | ((tdqs_en & 0x1) << 11)
- | ((rtt & 0x4) << 7) /* rtt field is split */
- | ((wrlvl_en & 0x1) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((dic & 0x2) << 4) /* DIC field is split */
- | ((al & 0x3) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((dic & 0x1) << 1) /* DIC field is split */
- | ((dll_en & 0x1) << 0)
- );
-
- /*
- * DLL control for precharge PD
- * 0=slow exit DLL off (tXPDLL)
- * 1=fast exit DLL on (tXP)
- */
- dll_on = 1;
- wr_mclk = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps;
- if (wr_mclk >= 12)
- wr = 6;
- else if (wr_mclk >= 9)
- wr = 5;
- else
- wr = wr_mclk - 4;
- dll_rst = 0; /* dll no reset */
- mode = 0; /* normal mode */
-
- /* look up table to get the cas latency bits */
- if (cas_latency >= 5 && cas_latency <= 11) {
- unsigned char cas_latency_table[7] = {
- 0x2, /* 5 clocks */
- 0x4, /* 6 clocks */
- 0x6, /* 7 clocks */
- 0x8, /* 8 clocks */
- 0xa, /* 9 clocks */
- 0xc, /* 10 clocks */
- 0xe /* 11 clocks */
- };
- caslat = cas_latency_table[cas_latency - 5];
- }
- bt = 0; /* Nibble sequential */
-
- switch (popts->burst_length) {
- case DDR_BL8:
- bl = 0;
- break;
- case DDR_OTF:
- bl = 1;
- break;
- case DDR_BC4:
- bl = 2;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to on-the-fly BC4 or BL8 beats.\n",
- popts->burst_length);
- bl = 1;
- break;
- }
-
- sdmode = (0
- | ((dll_on & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_rst & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | (((caslat >> 1) & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((bl & 0x3) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
-
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-}
-
-#else /* !CONFIG_FSL_DDR3 */
-
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /*
- * FIXME: This ought to be pre-calculated in a
- * technology-specific routine,
- * e.g. compute_DDR2_mode_register(), and then the
- * sdmode and esdmode passed in as part of common_dimm.
- */
-
- /* Extended Mode Register */
- unsigned int mrs = 0; /* Mode Register Set */
- unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */
- unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */
- unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */
- unsigned int ocd = 0; /* 0x0=OCD not supported,
- 0x7=OCD default state */
- unsigned int rtt;
- unsigned int al; /* Posted CAS# additive latency (AL) */
- unsigned int ods = 0; /* Output Drive Strength:
- 0 = Full strength (18ohm)
- 1 = Reduced strength (4ohm) */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register (MR) */
- unsigned int mr; /* Mode Register Definition */
- unsigned int pd; /* Power-Down Mode */
- unsigned int wr; /* Write Recovery */
- unsigned int dll_res; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 0;/* CAS# latency */
- /* BT: Burst Type (0=Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
-#if defined(CONFIG_FSL_DDR2)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-#endif
-
- rtt = fsl_ddr_get_rtt();
-
- al = additive_latency;
-
- esdmode = (0
- | ((mrs & 0x3) << 14)
- | ((outputs & 0x1) << 12)
- | ((rdqs_en & 0x1) << 11)
- | ((dqs_en & 0x1) << 10)
- | ((ocd & 0x7) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((al & 0x7) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((ods & 0x1) << 1)
- | ((dll_en & 0x1) << 0)
- );
-
- mr = 0; /* FIXME: CHECKME */
-
- /*
- * 0 = Fast Exit (Normal)
- * 1 = Slow Exit (Low Power)
- */
- pd = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- wr = 0; /* Historical */
-#elif defined(CONFIG_FSL_DDR2)
- wr = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps - 1;
-#endif
- dll_res = 0;
- mode = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- if (1 <= cas_latency && cas_latency <= 4) {
- unsigned char mode_caslat_table[4] = {
- 0x5, /* 1.5 clocks */
- 0x2, /* 2.0 clocks */
- 0x6, /* 2.5 clocks */
- 0x3 /* 3.0 clocks */
- };
- caslat = mode_caslat_table[cas_latency - 1];
- } else {
- printf("Warning: unknown cas_latency %d\n", cas_latency);
- }
-#elif defined(CONFIG_FSL_DDR2)
- caslat = cas_latency;
-#endif
- bt = 0;
-
- switch (popts->burst_length) {
- case DDR_BL4:
- bl = 2;
- break;
- case DDR_BL8:
- bl = 3;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to 4 beats.\n",
- popts->burst_length);
- bl = 2;
- break;
- }
-
- sdmode = (0
- | ((mr & 0x3) << 14)
- | ((pd & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_res & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | ((caslat & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((bl & 0x7) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-}
-#endif
-
-/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
-static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_value; /* Initialization value */
-
- init_value = 0xDEADBEEF;
- ddr->ddr_data_init = init_value;
-}
-
-/*
- * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
- * The old controller on the 8540/60 doesn't have this register.
- * Hope it's OK to set it (to 0) anyway.
- */
-static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int clk_adjust; /* Clock adjust */
-
- clk_adjust = popts->clk_adjust;
- ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
-}
-
-/* DDR Initialization Address (DDR_INIT_ADDR) */
-static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_addr = 0; /* Initialization address */
-
- ddr->ddr_init_addr = init_addr;
-}
-
-/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
-static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int uia = 0; /* Use initialization address */
- unsigned int init_ext_addr = 0; /* Initialization address */
-
- ddr->ddr_init_ext_addr = (0
- | ((uia & 0x1) << 31)
- | (init_ext_addr & 0xF)
- );
-}
-
-/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
-static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
- unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
- unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
- unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
- unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
-
-#if defined(CONFIG_FSL_DDR3)
- if (popts->burst_length == DDR_BL8) {
- /* We set BL/2 for fixed BL8 */
- rrt = 0; /* BL/2 clocks */
- wwt = 0; /* BL/2 clocks */
- } else {
- /* We need to set BL/2 + 2 to BC4 and OTF */
- rrt = 2; /* BL/2 + 2 clocks */
- wwt = 2; /* BL/2 + 2 clocks */
- }
- dll_lock = 1; /* tDLLK = 512 clocks from spec */
-#endif
- ddr->timing_cfg_4 = (0
- | ((rwt & 0xf) << 28)
- | ((wrt & 0xf) << 24)
- | ((rrt & 0xf) << 20)
- | ((wwt & 0xf) << 16)
- | (dll_lock & 0x3)
- );
- debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
-}
-
-/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
-static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rodt_on = 0; /* Read to ODT on */
- unsigned int rodt_off = 0; /* Read to ODT off */
- unsigned int wodt_on = 0; /* Write to ODT on */
- unsigned int wodt_off = 0; /* Write to ODT off */
-
-#if defined(CONFIG_FSL_DDR3)
- rodt_on = 3; /* 2 clocks */
- rodt_off = 4; /* 4 clocks */
- wodt_on = 2; /* 1 clocks */
- wodt_off = 4; /* 4 clocks */
-#endif
-
- ddr->timing_cfg_5 = (0
- | ((rodt_on & 0x1f) << 24)
- | ((rodt_off & 0x7) << 20)
- | ((wodt_on & 0x1f) << 12)
- | ((wodt_off & 0x7) << 8)
- );
- debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
-}
-
-/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
-static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en)
-{
- unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
- /* Normal Operation Full Calibration Time (tZQoper) */
- unsigned int zqoper = 0;
- /* Normal Operation Short Calibration Time (tZQCS) */
- unsigned int zqcs = 0;
-
- if (zq_en) {
- zqinit = 9; /* 512 clocks */
- zqoper = 8; /* 256 clocks */
- zqcs = 6; /* 64 clocks */
- }
-
- ddr->ddr_zq_cntl = (0
- | ((zq_en & 0x1) << 31)
- | ((zqinit & 0xF) << 24)
- | ((zqoper & 0xF) << 16)
- | ((zqcs & 0xF) << 8)
- );
-}
-
-/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
-static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
- const memctl_options_t *popts)
-{
- /*
- * First DQS pulse rising edge after margining mode
- * is programmed (tWL_MRD)
- */
- unsigned int wrlvl_mrd = 0;
- /* ODT delay after margining mode is programmed (tWL_ODTEN) */
- unsigned int wrlvl_odten = 0;
- /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
- unsigned int wrlvl_dqsen = 0;
- /* WRLVL_SMPL: Write leveling sample time */
- unsigned int wrlvl_smpl = 0;
- /* WRLVL_WLR: Write leveling repeition time */
- unsigned int wrlvl_wlr = 0;
- /* WRLVL_START: Write leveling start time */
- unsigned int wrlvl_start = 0;
-
- /* suggest enable write leveling for DDR3 due to fly-by topology */
- if (wrlvl_en) {
- /* tWL_MRD min = 40 nCK, we set it 64 */
- wrlvl_mrd = 0x6;
- /* tWL_ODTEN 128 */
- wrlvl_odten = 0x7;
- /* tWL_DQSEN min = 25 nCK, we set it 32 */
- wrlvl_dqsen = 0x5;
- /*
- * Write leveling sample time at least need 6 clocks
- * higher than tWLO to allow enough time for progagation
- * delay and sampling the prime data bits.
- */
- wrlvl_smpl = 0xf;
- /*
- * Write leveling repetition time
- * at least tWLO + 6 clocks clocks
- * we set it 32
- */
- wrlvl_wlr = 0x5;
- /*
- * Write leveling start time
- * The value use for the DQS_ADJUST for the first sample
- * when write leveling is enabled.
- */
- wrlvl_start = 0x8;
- /*
- * Override the write leveling sample and start time
- * according to specific board
- */
- if (popts->wrlvl_override) {
- wrlvl_smpl = popts->wrlvl_sample;
- wrlvl_start = popts->wrlvl_start;
- }
- }
-
- ddr->ddr_wrlvl_cntl = (0
- | ((wrlvl_en & 0x1) << 31)
- | ((wrlvl_mrd & 0x7) << 24)
- | ((wrlvl_odten & 0x7) << 20)
- | ((wrlvl_dqsen & 0x7) << 16)
- | ((wrlvl_smpl & 0xf) << 12)
- | ((wrlvl_wlr & 0x7) << 8)
- | ((wrlvl_start & 0x1F) << 0)
- );
-}
-
-/* DDR Self Refresh Counter (DDR_SR_CNTR) */
-static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
-{
- /* Self Refresh Idle Threshold */
- ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
-}
-
-/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */
-static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */
- unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */
- unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */
- unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */
- unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */
- unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */
- unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */
- unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */
-
- ddr->ddr_sdram_rcw_1 = (0
- | ((rcw0 & 0xF) << 28)
- | ((rcw1 & 0xF) << 24)
- | ((rcw2 & 0xF) << 20)
- | ((rcw3 & 0xF) << 16)
- | ((rcw4 & 0xF) << 12)
- | ((rcw5 & 0xF) << 8)
- | ((rcw6 & 0xF) << 4)
- | ((rcw7 & 0xF) << 0)
- );
-}
-
-/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */
-static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */
- unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */
- unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */
- unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */
- unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */
- unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */
- unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */
- unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */
-
- ddr->ddr_sdram_rcw_2 = (0
- | ((rcw8 & 0xF) << 28)
- | ((rcw9 & 0xF) << 24)
- | ((rcw10 & 0xF) << 20)
- | ((rcw11 & 0xF) << 16)
- | ((rcw12 & 0xF) << 12)
- | ((rcw13 & 0xF) << 8)
- | ((rcw14 & 0xF) << 4)
- | ((rcw15 & 0xF) << 0)
- );
-}
-
-unsigned int
-check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int res = 0;
-
- /*
- * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
- * not set at the same time.
- */
- if (ddr->ddr_sdram_cfg & 0x10000000
- && ddr->ddr_sdram_cfg & 0x00008000) {
- printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
- " should not be set at the same time.\n");
- res++;
- }
-
- return res;
-}
-
-unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_params,
- unsigned int dbw_cap_adj)
-{
- unsigned int i;
- unsigned int cas_latency;
- unsigned int additive_latency;
- unsigned int sr_it;
- unsigned int zq_en;
- unsigned int wrlvl_en;
-
- memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
-
- if (common_dimm == NULL) {
- printf("Error: subset DIMM params struct null pointer\n");
- return 1;
- }
-
- /*
- * Process overrides first.
- *
- * FIXME: somehow add dereated caslat to this
- */
- cas_latency = (popts->cas_latency_override)
- ? popts->cas_latency_override_value
- : common_dimm->lowest_common_SPD_caslat;
-
- additive_latency = (popts->additive_latency_override)
- ? popts->additive_latency_override_value
- : common_dimm->additive_latency;
-
- sr_it = (popts->auto_self_refresh_en)
- ? popts->sr_it
- : 0;
- /* ZQ calibration */
- zq_en = (popts->zq_en) ? 1 : 0;
- /* write leveling */
- wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
-
- /* Chip Select Memory Bounds (CSn_BNDS) */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- unsigned long long ea = 0, sa = 0;
-
- if (popts->ba_intlv_ctl && (i > 0) &&
- ((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) {
- /* Don't set up boundaries for other CS
- * other than CS0, if bank interleaving
- * is enabled and not CS2+CS3 interleaved.
- * But we need to set the ODT_RD_CFG and
- * ODT_WR_CFG for CS1_CONFIG here.
- */
- set_csn_config(i, ddr, popts, dimm_params);
- break;
- }
-
- if (dimm_params[i/2].n_ranks == 0) {
- debug("Skipping setup of CS%u "
- "because n_ranks on DIMM %u is 0\n", i, i/2);
- continue;
- }
- if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
- /*
- * This works superbank 2CS
- * There are 2 memory controllers configured
- * identically, memory is interleaved between them,
- * and each controller uses rank interleaving within
- * itself. Therefore the starting and ending address
- * on each controller is twice the amount present on
- * each controller.
- */
- unsigned long long rank_density
- = dimm_params[0].capacity;
- ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
- }
- else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
- /*
- * If memory interleaving between controllers is NOT
- * enabled, the starting address for each memory
- * controller is distinct. However, because rank
- * interleaving is enabled, the starting and ending
- * addresses of the total memory on that memory
- * controller needs to be programmed into its
- * respective CS0_BNDS.
- */
- unsigned long long rank_density
- = dimm_params[i/2].rank_density;
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- /* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
- * needs to be set.
- */
- sa = common_dimm->base_address;
- ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- /* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
- * and CS2_CNDS need to be set.
- */
- if (!(i&1)) {
- sa = dimm_params[i/2].base_address;
- ea = sa + (i * (rank_density >>
- dbw_cap_adj)) - 1;
- }
- break;
- case FSL_DDR_CS0_CS1:
- /* CS0+CS1 interleaving, CS0_CNDS needs
- * to be set
- */
- sa = common_dimm->base_address;
- ea = sa + (2 * (rank_density >> dbw_cap_adj))-1;
- break;
- case FSL_DDR_CS2_CS3:
- /* CS2+CS3 interleaving*/
- if (i == 2) {
- sa = dimm_params[i/2].base_address;
- ea = sa + (2 * (rank_density >>
- dbw_cap_adj)) - 1;
- }
- break;
- default: /* No bank(chip-select) interleaving */
- break;
- }
- }
- else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
- /*
- * Only the rank on CS0 of each memory controller may
- * be used if memory controller interleaving is used
- * without rank interleaving within each memory
- * controller. However, the ending address programmed
- * into each CS0 must be the sum of the amount of
- * memory in the two CS0 ranks.
- */
- if (i == 0) {
- unsigned long long rank_density
- = dimm_params[0].rank_density;
- ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
- }
-
- }
- else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) {
- /*
- * No rank interleaving and no memory controller
- * interleaving.
- */
- unsigned long long rank_density
- = dimm_params[i/2].rank_density;
- sa = dimm_params[i/2].base_address;
- ea = sa + (rank_density >> dbw_cap_adj) - 1;
- if (i&1) {
- if ((dimm_params[i/2].n_ranks == 1)) {
- /* Odd chip select, single-rank dimm */
- sa = 0;
- ea = 0;
- } else {
- /* Odd chip select, dual-rank DIMM */
- sa += rank_density >> dbw_cap_adj;
- ea += rank_density >> dbw_cap_adj;
- }
- }
- }
-
- sa >>= 24;
- ea >>= 24;
-
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
-
- debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- set_csn_config(i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- }
-
-#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr);
-#endif
-
- set_timing_cfg_3(ddr, common_dimm, cas_latency);
- set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_2(ddr, popts, common_dimm,
- cas_latency, additive_latency);
-
- set_ddr_sdram_cfg(ddr, popts, common_dimm);
-
- set_ddr_sdram_cfg_2(ddr, popts);
- set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency);
- set_ddr_sdram_mode_2(ddr, popts);
- set_ddr_sdram_interval(ddr, popts, common_dimm);
- set_ddr_data_init(ddr);
- set_ddr_sdram_clk_cntl(ddr, popts);
- set_ddr_init_addr(ddr);
- set_ddr_init_ext_addr(ddr);
- set_timing_cfg_4(ddr, popts);
- set_timing_cfg_5(ddr);
-
- set_ddr_zq_cntl(ddr, zq_en);
- set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
-
- set_ddr_sr_cntr(ddr, sr_it);
-
- set_ddr_sdram_rcw_1(ddr);
- set_ddr_sdram_rcw_2(ddr);
-
- return check_fsl_memctl_config_regs(ddr);
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef FSL_DDR_MAIN_H
-#define FSL_DDR_MAIN_H
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-#include "common_timing_params.h"
-
-/*
- * Bind the main DDR setup driver's generic names
- * to this specific DDR technology.
- */
-static __inline__ int
-compute_dimm_parameters(const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
-}
-
-/*
- * Data Structures
- *
- * All data structures have to be on the stack
- */
-#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
-
-typedef struct {
- generic_spd_eeprom_t
- spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- struct dimm_params_s
- dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
- common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
- fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
-} fsl_ddr_info_t;
-
-/* Compute steps */
-#define STEP_GET_SPD (1 << 0)
-#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
-#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
-#define STEP_GATHER_OPTS (1 << 3)
-#define STEP_ASSIGN_ADDRESSES (1 << 4)
-#define STEP_COMPUTE_REGS (1 << 5)
-#define STEP_PROGRAM_REGS (1 << 6)
-#define STEP_ALL 0xFFF
-
-extern unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step);
-
-extern const char * step_to_string(unsigned int step);
-
-extern unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_parameters,
- unsigned int dbw_capacity_adjust);
-extern unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms);
-extern unsigned int populate_memctl_options(int all_DIMMs_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-
-extern unsigned int mclk_to_picos(unsigned int mclk);
-extern unsigned int get_memory_clk_period_ps(void);
-extern unsigned int picos_to_mclk(unsigned int picos);
-
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- */
-
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 2 bits up to the top. */
- bsize = ((row_dens >> 2) | ((row_dens & 3) << 6));
- bsize <<= 24ULL;
- debug("DDR: DDR I rank density = 0x%08x\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * tCKmax from DDR I SPD Byte 43
- *
- * Bits 7:2 == whole ns
- * Bits 1:0 == quarter ns
- * 00 == 0.00 ns
- * 01 == 0.25 ns
- * 10 == 0.50 ns
- * 11 == 0.75 ns
- *
- * Returns picoseconds.
- */
-static unsigned int
-compute_tckmax_from_spd_ps(unsigned int byte43)
-{
- return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can be.
- * If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-E
- * Table 11.
- *
- * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2
- */
- /* CL2.0 CL2.5 CL3.0 */
-unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 };
-
-unsigned int
-compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr1_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && lowest_tCKmin_found <= x && x <= mclk_ps) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 1;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR1 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR) {
- printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr1_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = spd->nrows;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw_lsb;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /*
- * FIXME: Need to determine registered_dimm status.
- * 1 == register buffered
- * 0 == unbuffered
- */
- pdimm->registered_dimm = 0; /* unbuffered */
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->bank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tCKmin_X_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tCKmin_X_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tCKmin_X_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tCKmax_ps = compute_tckmax_from_spd_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_X should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_X = __ilog2(spd->cas_lat);
- pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X));
- pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X)
- & ~(1 << pdimm->caslat_X_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->tRCD_ps = spd->trcd * 250;
- pdimm->tRP_ps = spd->trp * 250;
- pdimm->tRAS_ps = spd->tras * 1000;
-
- pdimm->tWR_ps = mclk_to_picos(3);
- pdimm->tWTR_ps = mclk_to_picos(1);
- pdimm->tRFC_ps = compute_trfc_ps_from_spd(0, spd->trfc);
-
- pdimm->tRRD_ps = spd->trrd * 250;
- pdimm->tRC_ps = compute_trc_ps_from_spd(0, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tDS_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tDH_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->tRTP_ps = mclk_to_picos(2); /* By the book. */
- pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
- pdimm->tQHS_ps = spd->tqhs * 10;
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- *
- */
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 5 bits up to the top. */
- bsize = ((row_dens >> 5) | ((row_dens & 31) << 3));
- bsize <<= 27ULL;
- debug("DDR: DDR II rank density = 0x%08x\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can.
- * be. If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-2C
- * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS,
- * and tRC for corresponding bin"
- *
- * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
- * Not certain if any good value exists for CL=2
- */
- /* CL2 CL3 CL4 CL5 CL6 */
-unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500 };
-
-unsigned int
-compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr2_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 2;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR2 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR2) {
- printf("DIMM %u: is not a DDR2 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr2_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /* FIXME: what about registered SO-DIMM? */
- switch (spd->dimm_type) {
- case 0x01: /* RDIMM */
- case 0x10: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
- break;
-
- case 0x02: /* UDIMM */
- case 0x04: /* SO-DIMM */
- case 0x08: /* Micro-DIMM */
- case 0x20: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
- break;
-
- default:
- printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
- return 1;
- break;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->rank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tCKmin_X_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tCKmin_X_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tCKmin_X_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_X should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_X = __ilog2(spd->cas_lat);
- pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X));
- pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X)
- & ~(1 << pdimm->caslat_X_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->tRCD_ps = spd->trcd * 250;
- pdimm->tRP_ps = spd->trp * 250;
- pdimm->tRAS_ps = spd->tras * 1000;
-
- pdimm->tWR_ps = spd->twr * 250;
- pdimm->tWTR_ps = spd->twtr * 250;
- pdimm->tRFC_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc);
-
- pdimm->tRRD_ps = spd->trrd * 250;
- pdimm->tRC_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tDS_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tDH_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->tRTP_ps = spd->trtp * 250;
- pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
- pdimm->tQHS_ps = spd->tqhs * 10;
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * calculate the organization and timing parameter
- * from ddr3 spd, please refer to the spec
- * JEDEC standard No.21-C 4_01_02_11R18.pdf
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * each rank size =
- * sdram capacity(bit) / 8 * primary bus width / sdram width
- *
- * where: sdram capacity = spd byte4[3:0]
- * primary bus width = spd byte8[2:0]
- * sdram width = spd byte7[2:0]
- *
- * SPD byte4 - sdram density and banks
- * bit[3:0] size(bit) size(byte)
- * 0000 256Mb 32MB
- * 0001 512Mb 64MB
- * 0010 1Gb 128MB
- * 0011 2Gb 256MB
- * 0100 4Gb 512MB
- * 0101 8Gb 1GB
- * 0110 16Gb 2GB
- *
- * SPD byte8 - module memory bus width
- * bit[2:0] primary bus width
- * 000 8bits
- * 001 16bits
- * 010 32bits
- * 011 64bits
- *
- * SPD byte7 - module organiztion
- * bit[2:0] sdram device width
- * 000 4bits
- * 001 8bits
- * 010 16bits
- * 011 32bits
- *
- */
-static unsigned long long
-compute_ranksize(const ddr3_spd_eeprom_t *spd)
-{
- unsigned long long bsize;
-
- int nbit_sdram_cap_bsize = 0;
- int nbit_primary_bus_width = 0;
- int nbit_sdram_width = 0;
-
- if ((spd->density_banks & 0xf) < 7)
- nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
- if ((spd->bus_width & 0x7) < 4)
- nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
- if ((spd->organization & 0x7) < 4)
- nbit_sdram_width = (spd->organization & 0x7) + 2;
-
- bsize = 1ULL << (nbit_sdram_cap_bsize - 3
- + nbit_primary_bus_width - nbit_sdram_width);
-
- debug("DDR: DDR III rank density = 0x%16lx\n", bsize);
-
- return bsize;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR3 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
- unsigned int mtb_ps;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR3) {
- printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr3_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
- if ((spd->bus_width >> 3) & 0x3)
- pdimm->ec_sdram_width = 8;
- else
- pdimm->ec_sdram_width = 0;
- pdimm->data_width = pdimm->primary_sdram_width
- + pdimm->ec_sdram_width;
-
- switch (spd->module_type & 0xf) {
- case 0x01: /* RDIMM */
- case 0x05: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
- break;
-
- case 0x02: /* UDIMM */
- case 0x03: /* SO-DIMM */
- case 0x04: /* Micro-DIMM */
- case 0x06: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
- break;
-
- default:
- printf("unknown dimm_type 0x%02X\n", spd->module_type);
- return 1;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
- pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
- pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
-
- /*
- * The SPD spec has not the ECC bit,
- * We consider the DIMM as ECC capability
- * when the extension bus exist
- */
- if (pdimm->ec_sdram_width)
- pdimm->edc_config = 0x02;
- else
- pdimm->edc_config = 0x00;
-
- /*
- * The SPD spec has not the burst length byte
- * but DDR3 spec has nature BL8 and BC4,
- * BL8 -bit3, BC4 -bit2
- */
- pdimm->burst_lengths_bitmask = 0x0c;
- pdimm->row_density = __ilog2(pdimm->rank_density);
-
- /* MTB - medium timebase
- * The unit in the SPD spec is ns,
- * We convert it to ps.
- * eg: MTB = 0.125ns (125ps)
- */
- mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
- pdimm->mtb_ps = mtb_ps;
-
- /*
- * sdram minimum cycle time
- * we assume the MTB is 0.125ns
- * eg:
- * tCK_min=15 MTB (1.875ns) ->DDR3-1066
- * =12 MTB (1.5ns) ->DDR3-1333
- * =10 MTB (1.25ns) ->DDR3-1600
- */
- pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
-
- /*
- * CAS latency supported
- * bit4 - CL4
- * bit5 - CL5
- * bit18 - CL18
- */
- pdimm->caslat_X = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
-
- /*
- * min CAS latency time
- * eg: tAA_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->tAA_ps = spd->tAA_min * mtb_ps;
-
- /*
- * min write recovery time
- * eg:
- * tWR_min = 120 MTB (15ns) -> all speed grades.
- */
- pdimm->tWR_ps = spd->tWR_min * mtb_ps;
-
- /*
- * min RAS to CAS delay time
- * eg: tRCD_min =
- * DDR3-800 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25)
- */
- pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
-
- /*
- * min row active to row active delay time
- * eg: tRRD_min =
- * DDR3-800(1KB page) 80 MTB (10ns)
- * DDR3-1333(1KB page) 48 MTB (6ns)
- */
- pdimm->tRRD_ps = spd->tRRD_min * mtb_ps;
-
- /*
- * min row precharge delay time
- * eg: tRP_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->tRP_ps = spd->tRP_min * mtb_ps;
-
- /* min active to precharge delay time
- * eg: tRAS_min =
- * DDR3-800D 300 MTB (37.5ns)
- * DDR3-1066F 300 MTB (37.5ns)
- * DDR3-1333H 288 MTB (36ns)
- * DDR3-1600H 280 MTB (35ns)
- */
- pdimm->tRAS_ps = (((spd->tRAS_tRC_ext & 0xf) << 8) | spd->tRAS_min_lsb)
- * mtb_ps;
- /*
- * min active to actice/refresh delay time
- * eg: tRC_min =
- * DDR3-800D 400 MTB (50ns)
- * DDR3-1066F 405 MTB (50.625ns)
- * DDR3-1333H 396 MTB (49.5ns)
- * DDR3-1600H 370 MTB (46.25ns)
- */
- pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
- * mtb_ps;
- /*
- * min refresh recovery delay time
- * eg: tRFC_min =
- * 512Mb 720 MTB (90ns)
- * 1Gb 880 MTB (110ns)
- * 2Gb 1280 MTB (160ns)
- */
- pdimm->tRFC_ps = ((spd->tRFC_min_msb << 8) | spd->tRFC_min_lsb)
- * mtb_ps;
- /*
- * min internal write to read command delay time
- * eg: tWTR_min = 40 MTB (7.5ns) - all speed bins.
- * tWRT is at least 4 mclk independent of operating freq.
- */
- pdimm->tWTR_ps = spd->tWTR_min * mtb_ps;
-
- /*
- * min internal read to precharge command delay time
- * eg: tRTP_min = 40 MTB (7.5ns) - all speed bins.
- * tRTP is at least 4 mclk independent of operating freq.
- */
- pdimm->tRTP_ps = spd->tRTP_min * mtb_ps;
-
- /*
- * Average periodic refresh interval
- * tREFI = 7.8 us at normal temperature range
- * = 3.9 us at ext temperature range
- */
- pdimm->refresh_rate_ps = 7800000;
-
- /*
- * min four active window delay time
- * eg: tFAW_min =
- * DDR3-800(1KB page) 320 MTB (40ns)
- * DDR3-1066(1KB page) 300 MTB (37.5ns)
- * DDR3-1333(1KB page) 240 MTB (30ns)
- * DDR3-1600(1KB page) 240 MTB (30ns)
- */
- pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
- * mtb_ps;
-
- /*
- * We need check the address mirror for unbuffered DIMM
- * If SPD indicate the address map mirror, The DDR controller
- * need care it.
- */
- if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
- (spd->module_type == SPD_MODULETYPE_SODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MINIUDIMM))
- pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-unsigned int
-compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
- unsigned int tAAmin_ps = 0;
- unsigned int tCKmin_X_ps = 0;
- unsigned int common_caslat;
- unsigned int caslat_actual;
- unsigned int retry = 16;
- unsigned int tmp;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- /* compute the common CAS latency supported between slots */
- tmp = dimm_params[0].caslat_X;
- for (i = 1; i < number_of_dimms; i++)
- tmp &= dimm_params[i].caslat_X;
- common_caslat = tmp;
-
- /* compute the max tAAmin tCKmin between slots */
- for (i = 0; i < number_of_dimms; i++) {
- tAAmin_ps = max(tAAmin_ps, dimm_params[i].tAA_ps);
- tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
- }
- /* validate if the memory clk is in the range of dimms */
- if (mclk_ps < tCKmin_X_ps) {
- printf("The DIMM max tCKmin is %d ps,"
- "doesn't support the MCLK cycle %d ps\n",
- tCKmin_X_ps, mclk_ps);
- return 1;
- }
- /* determine the acutal cas latency */
- caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
- /* check if the dimms support the CAS latency */
- while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
- caslat_actual++;
- retry--;
- }
- /* once the caculation of caslat_actual is completed
- * we must verify that this CAS latency value does not
- * exceed tAAmax, which is 20 ns for all DDR3 speed grades
- */
- if (caslat_actual * mclk_ps > 20000) {
- printf("The choosen cas latency %d is too large\n",
- caslat_actual);
- return 1;
- }
- outpdimm->lowest_common_SPD_caslat = caslat_actual;
-
- return 0;
-}
-
-/*
- * compute_lowest_common_dimm_parameters()
- *
- * Determine the worst-case DIMM timing parameters from the set of DIMMs
- * whose parameters have been computed into the array pointed to
- * by dimm_params.
- */
-unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
-
- unsigned int tCKmin_X_ps = 0;
- unsigned int tCKmax_ps = 0xFFFFFFFF;
- unsigned int tCKmax_max_ps = 0;
- unsigned int tRCD_ps = 0;
- unsigned int tRP_ps = 0;
- unsigned int tRAS_ps = 0;
- unsigned int tWR_ps = 0;
- unsigned int tWTR_ps = 0;
- unsigned int tRFC_ps = 0;
- unsigned int tRRD_ps = 0;
- unsigned int tRC_ps = 0;
- unsigned int refresh_rate_ps = 0;
- unsigned int tIS_ps = 0;
- unsigned int tIH_ps = 0;
- unsigned int tDS_ps = 0;
- unsigned int tDH_ps = 0;
- unsigned int tRTP_ps = 0;
- unsigned int tDQSQ_max_ps = 0;
- unsigned int tQHS_ps = 0;
-
- unsigned int temp1, temp2;
- unsigned int additive_latency = 0;
-#if !defined(CONFIG_FSL_DDR3)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
- unsigned int lowest_good_caslat;
- unsigned int not_ok;
-
- debug("using mclk_ps = %u\n", mclk_ps);
-#endif
-
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- /*
- * If there are no ranks on this DIMM,
- * it probably doesn't exist, so skip it.
- */
- if (dimm_params[i].n_ranks == 0) {
- temp1++;
- continue;
- }
-
- /*
- * Find minimum tCKmax_ps to find fastest slow speed,
- * i.e., this is the slowest the whole system can go.
- */
- tCKmax_ps = min(tCKmax_ps, dimm_params[i].tCKmax_ps);
-
- /* Either find maximum value to determine slowest
- * speed, delay, time, period, etc */
- tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
- tCKmax_max_ps = max(tCKmax_max_ps, dimm_params[i].tCKmax_ps);
- tRCD_ps = max(tRCD_ps, dimm_params[i].tRCD_ps);
- tRP_ps = max(tRP_ps, dimm_params[i].tRP_ps);
- tRAS_ps = max(tRAS_ps, dimm_params[i].tRAS_ps);
- tWR_ps = max(tWR_ps, dimm_params[i].tWR_ps);
- tWTR_ps = max(tWTR_ps, dimm_params[i].tWTR_ps);
- tRFC_ps = max(tRFC_ps, dimm_params[i].tRFC_ps);
- tRRD_ps = max(tRRD_ps, dimm_params[i].tRRD_ps);
- tRC_ps = max(tRC_ps, dimm_params[i].tRC_ps);
- tIS_ps = max(tIS_ps, dimm_params[i].tIS_ps);
- tIH_ps = max(tIH_ps, dimm_params[i].tIH_ps);
- tDS_ps = max(tDS_ps, dimm_params[i].tDS_ps);
- tDH_ps = max(tDH_ps, dimm_params[i].tDH_ps);
- tRTP_ps = max(tRTP_ps, dimm_params[i].tRTP_ps);
- tQHS_ps = max(tQHS_ps, dimm_params[i].tQHS_ps);
- refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
-
- /*
- * Find maximum tDQSQ_max_ps to find slowest.
- *
- * FIXME: is finding the slowest value the correct
- * strategy for this parameter?
- */
- tDQSQ_max_ps = max(tDQSQ_max_ps, dimm_params[i].tDQSQ_max_ps);
- }
-
- outpdimm->ndimms_present = number_of_dimms - temp1;
-
- if (temp1 == number_of_dimms) {
- debug("no dimms this memory controller\n");
- return 0;
- }
-
- outpdimm->tCKmin_X_ps = tCKmin_X_ps;
- outpdimm->tCKmax_ps = tCKmax_ps;
- outpdimm->tCKmax_max_ps = tCKmax_max_ps;
- outpdimm->tRCD_ps = tRCD_ps;
- outpdimm->tRP_ps = tRP_ps;
- outpdimm->tRAS_ps = tRAS_ps;
- outpdimm->tWR_ps = tWR_ps;
- outpdimm->tWTR_ps = tWTR_ps;
- outpdimm->tRFC_ps = tRFC_ps;
- outpdimm->tRRD_ps = tRRD_ps;
- outpdimm->tRC_ps = tRC_ps;
- outpdimm->refresh_rate_ps = refresh_rate_ps;
- outpdimm->tIS_ps = tIS_ps;
- outpdimm->tIH_ps = tIH_ps;
- outpdimm->tDS_ps = tDS_ps;
- outpdimm->tDH_ps = tDH_ps;
- outpdimm->tRTP_ps = tRTP_ps;
- outpdimm->tDQSQ_max_ps = tDQSQ_max_ps;
- outpdimm->tQHS_ps = tQHS_ps;
-
- /* Determine common burst length for all DIMMs. */
- temp1 = 0xff;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp1 &= dimm_params[i].burst_lengths_bitmask;
- }
- }
- outpdimm->all_DIMMs_burst_lengths_bitmask = temp1;
-
- /* Determine if all DIMMs registered buffered. */
- temp1 = temp2 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- if (dimm_params[i].registered_dimm)
- temp1 = 1;
- if (!dimm_params[i].registered_dimm)
- temp2 = 1;
- }
- }
-
- outpdimm->all_DIMMs_registered = 0;
- if (temp1 && !temp2) {
- outpdimm->all_DIMMs_registered = 1;
- }
-
- outpdimm->all_DIMMs_unbuffered = 0;
- if (!temp1 && temp2) {
- outpdimm->all_DIMMs_unbuffered = 1;
- }
-
- /* CHECKME: */
- if (!outpdimm->all_DIMMs_registered
- && !outpdimm->all_DIMMs_unbuffered) {
- printf("ERROR: Mix of registered buffered and unbuffered "
- "DIMMs detected!\n");
- }
-
-#if defined(CONFIG_FSL_DDR3)
- if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
- return 1;
-#else
- /*
- * Compute a CAS latency suitable for all DIMMs
- *
- * Strategy for SPD-defined latencies: compute only
- * CAS latency defined by all DIMMs.
- */
-
- /*
- * Step 1: find CAS latency common to all DIMMs using bitwise
- * operation.
- */
- temp1 = 0xFF;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp2 = 0;
- temp2 |= 1 << dimm_params[i].caslat_X;
- temp2 |= 1 << dimm_params[i].caslat_X_minus_1;
- temp2 |= 1 << dimm_params[i].caslat_X_minus_2;
- /*
- * FIXME: If there was no entry for X-2 (X-1) in
- * the SPD, then caslat_X_minus_2
- * (caslat_X_minus_1) contains either 255 or
- * 0xFFFFFFFF because that's what the glorious
- * __ilog2 function returns for an input of 0.
- * On 32-bit PowerPC, left shift counts with bit
- * 26 set (that the value of 255 or 0xFFFFFFFF
- * will have), cause the destination register to
- * be 0. That is why this works.
- */
- temp1 &= temp2;
- }
- }
-
- /*
- * Step 2: check each common CAS latency against tCK of each
- * DIMM's SPD.
- */
- lowest_good_caslat = 0;
- temp2 = 0;
- while (temp1) {
- not_ok = 0;
- temp2 = __ilog2(temp1);
- debug("checking common caslat = %u\n", temp2);
-
- /* Check if this CAS latency will work on all DIMMs at tCK. */
- for (i = 0; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks) {
- continue;
- }
- if (dimm_params[i].caslat_X == temp2) {
- if (mclk_ps >= dimm_params[i].tCKmin_X_ps) {
- debug("CL = %u ok on DIMM %u at tCK=%u"
- " ps with its tCKmin_X_ps of %u\n",
- temp2, i, mclk_ps,
- dimm_params[i].tCKmin_X_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_X_minus_1 == temp2) {
- unsigned int tCKmin_X_minus_1_ps
- = dimm_params[i].tCKmin_X_minus_1_ps;
- if (mclk_ps >= tCKmin_X_minus_1_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tCKmin_X_minus_1_ps of %u\n",
- temp2, i, mclk_ps,
- tCKmin_X_minus_1_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_X_minus_2 == temp2) {
- unsigned int tCKmin_X_minus_2_ps
- = dimm_params[i].tCKmin_X_minus_2_ps;
- if (mclk_ps >= tCKmin_X_minus_2_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tCKmin_X_minus_2_ps of %u\n",
- temp2, i, mclk_ps,
- tCKmin_X_minus_2_ps);
- continue;
- } else {
- not_ok++;
- }
- }
- }
-
- if (!not_ok) {
- lowest_good_caslat = temp2;
- }
-
- temp1 &= ~(1 << temp2);
- }
-
- debug("lowest common SPD-defined CAS latency = %u\n",
- lowest_good_caslat);
- outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
-
-
- /*
- * Compute a common 'de-rated' CAS latency.
- *
- * The strategy here is to find the *highest* dereated cas latency
- * with the assumption that all of the DIMMs will support a dereated
- * CAS latency higher than or equal to their lowest dereated value.
- */
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
- }
- outpdimm->highest_common_derated_caslat = temp1;
- debug("highest common dereated CAS latency = %u\n", temp1);
-#endif /* #if defined(CONFIG_FSL_DDR3) */
-
- /* Determine if all DIMMs ECC capable. */
- temp1 = 1;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks && dimm_params[i].edc_config != 2) {
- temp1 = 0;
- break;
- }
- }
- if (temp1) {
- debug("all DIMMs ECC capable\n");
- } else {
- debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
- }
- outpdimm->all_DIMMs_ECC_capable = temp1;
-
-#ifndef CONFIG_FSL_DDR3
- /* FIXME: move to somewhere else to validate. */
- if (mclk_ps > tCKmax_max_ps) {
- printf("Warning: some of the installed DIMMs "
- "can not operate this slowly.\n");
- return 1;
- }
-#endif
- /*
- * Compute additive latency.
- *
- * For DDR1, additive latency should be 0.
- *
- * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- *
- * For DDR3, we use the AL=0
- *
- * When to use additive latency for DDR2:
- *
- * I. Because you are using CL=3 and need to do ODT on writes and
- * want functionality.
- * 1. Are you going to use ODT? (Does your board not have
- * additional termination circuitry for DQ, DQS, DQS_,
- * DM, RDQS, RDQS_ for x4/x8 configs?)
- * 2. If so, is your lowest supported CL going to be 3?
- * 3. If so, then you must set AL=1 because
- *
- * WL >= 3 for ODT on writes
- * RL = AL + CL
- * WL = RL - 1
- * ->
- * WL = AL + CL - 1
- * AL + CL - 1 >= 3
- * AL + CL >= 4
- * QED
- *
- * RL >= 3 for ODT on reads
- * RL = AL + CL
- *
- * Since CL aren't usually less than 2, AL=0 is a minimum,
- * so the WL-derived AL should be the -- FIXME?
- *
- * II. Because you are using auto-precharge globally and want to
- * use additive latency (posted CAS) to get more bandwidth.
- * 1. Are you going to use auto-precharge mode globally?
- *
- * Use addtivie latency and compute AL to be 1 cycle less than
- * tRCD, i.e. the READ or WRITE command is in the cycle
- * immediately following the ACTIVATE command..
- *
- * III. Because you feel like it or want to do some sort of
- * degraded-performance experiment.
- * 1. Do you just want to use additive latency because you feel
- * like it?
- *
- * Validation: AL is less than tRCD, and within the other
- * read-to-precharge constraints.
- */
-
- additive_latency = 0;
-
-#if defined(CONFIG_FSL_DDR2)
- if (lowest_good_caslat < 4) {
- additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
- if (mclk_to_picos(additive_latency) > tRCD_ps) {
- additive_latency = picos_to_mclk(tRCD_ps);
- debug("setting additive_latency to %u because it was "
- " greater than tRCD_ps\n", additive_latency);
- }
- }
-
-#elif defined(CONFIG_FSL_DDR3)
- /*
- * The system will not use the global auto-precharge mode.
- * However, it uses the page mode, so we set AL=0
- */
- additive_latency = 0;
-#endif
-
- /*
- * Validate additive latency
- * FIXME: move to somewhere else to validate
- *
- * AL <= tRCD(min)
- */
- if (mclk_to_picos(additive_latency) > tRCD_ps) {
- printf("Error: invalid additive latency exceeds tRCD(min).\n");
- return 1;
- }
-
- /*
- * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
- * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
- * ADD_LAT (the register) must be set to a value less
- * than ACTTORW if WL = 1, then AL must be set to 1
- * RD_TO_PRE (the register) must be set to a minimum
- * tRTP + AL if AL is nonzero
- */
-
- /*
- * Additive latency will be applied only if the memctl option to
- * use it.
- */
- outpdimm->additive_latency = additive_latency;
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-extern void fsl_ddr_set_lawbar(
- const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-/* processor specific function */
-extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num);
-
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num);
-
-/*
- * ASSUMPTIONS:
- * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
- * - Same memory data bus width on all controllers
- *
- * NOTES:
- *
- * The memory controller and associated documentation use confusing
- * terminology when referring to the orgranization of DRAM.
- *
- * Here is a terminology translation table:
- *
- * memory controller/documention |industry |this code |signals
- * -------------------------------|-----------|-----------|-----------------
- * physical bank/bank |rank |rank |chip select (CS)
- * logical bank/sub-bank |bank |bank |bank address (BA)
- * page/row |row |page |row address
- * ??? |column |column |column address
- *
- * The naming confusion is further exacerbated by the descriptions of the
- * memory controller interleaving feature, where accesses are interleaved
- * _BETWEEN_ two seperate memory controllers. This is configured only in
- * CS0_CONFIG[INTLV_CTL] of each memory controller.
- *
- * memory controller documentation | number of chip selects
- * | per memory controller supported
- * --------------------------------|-----------------------------------------
- * cache line interleaving | 1 (CS0 only)
- * page interleaving | 1 (CS0 only)
- * bank interleaving | 1 (CS0 only)
- * superbank interleraving | depends on bank (chip select)
- * | interleraving [rank interleaving]
- * | mode used on every memory controller
- *
- * Even further confusing is the existence of the interleaving feature
- * _WITHIN_ each memory controller. The feature is referred to in
- * documentation as chip select interleaving or bank interleaving,
- * although it is configured in the DDR_SDRAM_CFG field.
- *
- * Name of field | documentation name | this code
- * -----------------------------|-----------------------|------------------
- * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving
- * | interleaving
- */
-
-#ifdef DEBUG
-const char *step_string_tbl[] = {
- "STEP_GET_SPD",
- "STEP_COMPUTE_DIMM_PARMS",
- "STEP_COMPUTE_COMMON_PARMS",
- "STEP_GATHER_OPTS",
- "STEP_ASSIGN_ADDRESSES",
- "STEP_COMPUTE_REGS",
- "STEP_PROGRAM_REGS",
- "STEP_ALL"
-};
-
-const char * step_to_string(unsigned int step) {
-
- unsigned int s = __ilog2(step);
-
- if ((1 << s) != step)
- return step_string_tbl[7];
-
- return step_string_tbl[s];
-}
-#endif
-
-int step_assign_addresses(fsl_ddr_info_t *pinfo,
- unsigned int dbw_cap_adj[],
- unsigned int *memctl_interleaving,
- unsigned int *rank_interleaving)
-{
- int i, j;
-
- /*
- * If a reduced data width is requested, but the SPD
- * specifies a physically wider device, adjust the
- * computed dimm capacities accordingly before
- * assigning addresses.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- unsigned int found = 0;
-
- switch (pinfo->memctl_opts[i].data_bus_width) {
- case 2:
- /* 16-bit */
- printf("can't handle 16-bit mode yet\n");
- break;
-
- case 1:
- /* 32-bit */
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int dw;
- dw = pinfo->dimm_params[i][j].data_width;
- if (pinfo->dimm_params[i][j].n_ranks
- && (dw == 72 || dw == 64)) {
- /*
- * FIXME: can't really do it
- * like this because this just
- * further reduces the memory
- */
- found = 1;
- break;
- }
- }
- if (found) {
- dbw_cap_adj[i] = 1;
- }
- break;
-
- case 0:
- /* 64-bit */
- break;
-
- default:
- printf("unexpected data bus width "
- "specified controller %u\n", i);
- return 1;
- }
- }
-
- /*
- * Check if all controllers are configured for memory
- * controller interleaving.
- */
- j = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (pinfo->memctl_opts[i].memctl_interleaving) {
- j++;
- }
- }
- if (j == 2)
- *memctl_interleaving = 1;
-
- /* Check that all controllers are rank interleaving. */
- j = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (pinfo->memctl_opts[i].ba_intlv_ctl) {
- j++;
- }
- }
- if (j == 2)
- *rank_interleaving = 1;
-
- if (*memctl_interleaving) {
- unsigned long long addr, total_mem_per_ctlr = 0;
- /*
- * If interleaving between memory controllers,
- * make each controller start at a base address
- * of 0.
- *
- * Also, if bank interleaving (chip select
- * interleaving) is enabled on each memory
- * controller, CS0 needs to be programmed to
- * cover the entire memory range on that memory
- * controller
- *
- * Bank interleaving also implies that each
- * addressed chip select is identical in size.
- */
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- addr = 0;
- pinfo->common_timing_params[i].base_address = 0ull;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned long long cap
- = pinfo->dimm_params[i][j].capacity;
-
- pinfo->dimm_params[i][j].base_address = addr;
- addr += cap >> dbw_cap_adj[i];
- total_mem_per_ctlr += cap >> dbw_cap_adj[i];
- }
- }
- pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
- } else {
- /*
- * Simple linear assignment if memory
- * controllers are not interleaved.
- */
- unsigned long long cur_memsize = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- u64 total_mem_per_ctlr = 0;
- pinfo->common_timing_params[i].base_address =
- cur_memsize;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- /* Compute DIMM base addresses. */
- unsigned long long cap =
- pinfo->dimm_params[i][j].capacity;
- pinfo->dimm_params[i][j].base_address =
- cur_memsize;
- cur_memsize += cap >> dbw_cap_adj[i];
- total_mem_per_ctlr += cap >> dbw_cap_adj[i];
- }
- pinfo->common_timing_params[i].total_mem =
- total_mem_per_ctlr;
- }
- }
-
- return 0;
-}
-
-unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
-{
- unsigned int i, j;
- unsigned int all_controllers_memctl_interleaving = 0;
- unsigned int all_controllers_rank_interleaving = 0;
- unsigned long long total_mem = 0;
-
- fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
- common_timing_params_t *timing_params = pinfo->common_timing_params;
-
- /* data bus width capacity adjust shift amount */
- unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- dbw_capacity_adjust[i] = 0;
- }
-
- debug("starting at step %u (%s)\n",
- start_step, step_to_string(start_step));
-
- switch (start_step) {
- case STEP_GET_SPD:
- /* STEP 1: Gather all DIMM SPD data */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
- }
-
- case STEP_COMPUTE_DIMM_PARMS:
- /* STEP 2: Compute DIMM parameters from SPD data */
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int retval;
- generic_spd_eeprom_t *spd =
- &(pinfo->spd_installed_dimms[i][j]);
- dimm_params_t *pdimm =
- &(pinfo->dimm_params[i][j]);
-
- retval = compute_dimm_parameters(spd, pdimm, i);
- if (retval == 2) {
- printf("Error: compute_dimm_parameters"
- " non-zero returned FATAL value "
- "for memctl=%u dimm=%u\n", i, j);
- return 0;
- }
- if (retval) {
- debug("Warning: compute_dimm_parameters"
- " non-zero return value for memctl=%u "
- "dimm=%u\n", i, j);
- }
- }
- }
-
- case STEP_COMPUTE_COMMON_PARMS:
- /*
- * STEP 3: Compute a common set of timing parameters
- * suitable for all of the DIMMs on each memory controller
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Computing lowest common DIMM"
- " parameters for memctl=%u\n", i);
- compute_lowest_common_dimm_parameters(
- pinfo->dimm_params[i],
- &timing_params[i],
- CONFIG_DIMM_SLOTS_PER_CTLR);
- }
-
- case STEP_GATHER_OPTS:
- /* STEP 4: Gather configuration requirements from user */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Reloading memory controller "
- "configuration options for memctl=%u\n", i);
- /*
- * This "reloads" the memory controller options
- * to defaults. If the user "edits" an option,
- * next_step points to the step after this,
- * which is currently STEP_ASSIGN_ADDRESSES.
- */
- populate_memctl_options(
- timing_params[i].all_DIMMs_registered,
- &pinfo->memctl_opts[i],
- pinfo->dimm_params[i], i);
- }
-
- case STEP_ASSIGN_ADDRESSES:
- /* STEP 5: Assign addresses to chip selects */
- step_assign_addresses(pinfo,
- dbw_capacity_adjust,
- &all_controllers_memctl_interleaving,
- &all_controllers_rank_interleaving);
-
- case STEP_COMPUTE_REGS:
- /* STEP 6: compute controller register values */
- debug("FSL Memory ctrl cg register computation\n");
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (timing_params[i].ndimms_present == 0) {
- memset(&ddr_reg[i], 0,
- sizeof(fsl_ddr_cfg_regs_t));
- continue;
- }
-
- compute_fsl_memctl_config_regs(
- &pinfo->memctl_opts[i],
- &ddr_reg[i], &timing_params[i],
- pinfo->dimm_params[i],
- dbw_capacity_adjust[i]);
- }
-
- default:
- break;
- }
-
- /* Compute the total amount of memory. */
-
- /*
- * If bank interleaving but NOT memory controller interleaving
- * CS_BNDS describe the quantity of memory on each memory
- * controller, so the total is the sum across.
- */
- if (!all_controllers_memctl_interleaving
- && all_controllers_rank_interleaving) {
- total_mem = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- total_mem += timing_params[i].total_mem;
- }
-
- } else {
- /*
- * Compute the amount of memory available just by
- * looking for the highest valid CSn_BNDS value.
- * This allows us to also experiment with using
- * only CS0 when using dual-rank DIMMs.
- */
- unsigned int max_end = 0;
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
- fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
- if (reg->cs[j].config & 0x80000000) {
- unsigned int end;
- end = reg->cs[j].bnds & 0xFFF;
- if (end > max_end) {
- max_end = end;
- }
- }
- }
- }
-
- total_mem = 1 + (((unsigned long long)max_end << 24ULL)
- | 0xFFFFFFULL);
- }
-
- return total_mem;
-}
-
-/*
- * fsl_ddr_sdram() -- this is the main function to be called by
- * initdram() in the board file.
- *
- * It returns amount of memory configured in bytes.
- */
-phys_size_t fsl_ddr_sdram(void)
-{
- unsigned int i;
- unsigned int memctl_interleaved;
- unsigned long long total_memory;
- fsl_ddr_info_t info;
-
- /* Reset info structure. */
- memset(&info, 0, sizeof(fsl_ddr_info_t));
-
- /* Compute it once normally. */
- total_memory = fsl_ddr_compute(&info, STEP_GET_SPD);
-
- /* Check for memory controller interleaving. */
- memctl_interleaved = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- memctl_interleaved +=
- info.memctl_opts[i].memctl_interleaving;
- }
-
- if (memctl_interleaved) {
- if (memctl_interleaved == CONFIG_NUM_DDR_CONTROLLERS) {
- debug("memctl interleaving\n");
- /*
- * Change the meaning of memctl_interleaved
- * to be "boolean".
- */
- memctl_interleaved = 1;
- } else {
- printf("Warning: memctl interleaving not "
- "properly configured on all controllers\n");
- memctl_interleaved = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
- info.memctl_opts[i].memctl_interleaving = 0;
- debug("Recomputing with memctl_interleaving off.\n");
- total_memory = fsl_ddr_compute(&info,
- STEP_ASSIGN_ADDRESSES);
- }
- }
-
- /* Program configuration registers. */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Programming controller %u\n", i);
- if (info.common_timing_params[i].ndimms_present == 0) {
- debug("No dimms present on controller %u; "
- "skipping programming\n", i);
- continue;
- }
-
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i);
- }
-
- if (memctl_interleaved) {
- const unsigned int ctrl_num = 0;
-
- /* Only set LAWBAR1 if memory controller interleaving is on. */
- fsl_ddr_set_lawbar(&info.common_timing_params[0],
- memctl_interleaved, ctrl_num);
- } else {
- /*
- * Memory controller interleaving is NOT on;
- * set each lawbar individually.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- 0, i);
- }
- }
-
- debug("total_memory = %llu\n", total_memory);
-
-#if !defined(CONFIG_PHYS_64BIT)
- /* Check for 4G or more. Bad. */
- if (total_memory >= (1ull << 32)) {
- printf("Detected %lld MB of memory\n", total_memory >> 20);
- printf("This U-Boot only supports < 4G of DDR\n");
- printf("You could rebuild it with CONFIG_PHYS_64BIT\n");
- total_memory = CONFIG_MAX_MEM_MAPPED;
- }
-#endif
-
- return total_memory;
-}
+++ /dev/null
-/*
- * Copyright 2008, 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-
-unsigned int populate_memctl_options(int all_DIMMs_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- unsigned int i;
- const char *p;
-
- /* Chip select options. */
-
- /* Pick chip-select local options. */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- /* If not DDR2, odt_rd_cfg and odt_wr_cfg need to be 0. */
-
- /* only for single CS? */
- popts->cs_local_opts[i].odt_rd_cfg = 0;
-
- popts->cs_local_opts[i].odt_wr_cfg = 1;
- popts->cs_local_opts[i].auto_precharge = 0;
- }
-
- /* Pick interleaving mode. */
-
- /*
- * 0 = no interleaving
- * 1 = interleaving between 2 controllers
- */
- popts->memctl_interleaving = 0;
-
- /*
- * 0 = cacheline
- * 1 = page
- * 2 = (logical) bank
- * 3 = superbank (only if CS interleaving is enabled)
- */
- popts->memctl_interleaving_mode = 0;
-
- /*
- * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
- * 1: page: bit to the left of the column bits selects the memctl
- * 2: bank: bit to the left of the bank bits selects the memctl
- * 3: superbank: bit to the left of the chip select selects the memctl
- *
- * NOTE: ba_intlv (rank interleaving) is independent of memory
- * controller interleaving; it is only within a memory controller.
- * Must use superbank interleaving if rank interleaving is used and
- * memory controller interleaving is enabled.
- */
-
- /*
- * 0 = no
- * 0x40 = CS0,CS1
- * 0x20 = CS2,CS3
- * 0x60 = CS0,CS1 + CS2,CS3
- * 0x04 = CS0,CS1,CS2,CS3
- */
- popts->ba_intlv_ctl = 0;
-
- /* Memory Organization Parameters */
- popts->registered_dimm_en = all_DIMMs_registered;
-
- /* Operational Mode Paramters */
-
- /* Pick ECC modes */
-#ifdef CONFIG_DDR_ECC
- popts->ECC_mode = 1; /* 0 = disabled, 1 = enabled */
-#else
- popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */
-#endif
- popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
-
- /*
- * Choose DQS config
- * 0 for DDR1
- * 1 for DDR2
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->DQS_config = 0;
-#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
- popts->DQS_config = 1;
-#endif
-
- /* Choose self-refresh during sleep. */
- popts->self_refresh_in_sleep = 1;
-
- /* Choose dynamic power management mode. */
- popts->dynamic_power = 0;
-
- /* 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */
- popts->data_bus_width = 0;
-
- /* Choose burst length. */
-#if defined(CONFIG_FSL_DDR3)
-#if defined(CONFIG_E500MC)
- popts->OTF_burst_chop_en = 0; /* on-the-fly burst chop disable */
- popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
-#else
- popts->OTF_burst_chop_en = 1; /* on-the-fly burst chop */
- popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
-#endif
-#else
- popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
-#endif
-
- /* Choose ddr controller address mirror mode */
-#if defined(CONFIG_FSL_DDR3)
- popts->mirrored_dimm = pdimm[0].mirrored_dimm;
-#endif
-
- /* Global Timing Parameters. */
- debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
-
- /* Pick a caslat override. */
- popts->cas_latency_override = 0;
- popts->cas_latency_override_value = 3;
- if (popts->cas_latency_override) {
- debug("using caslat override value = %u\n",
- popts->cas_latency_override_value);
- }
-
- /* Decide whether to use the computed derated latency */
- popts->use_derated_caslat = 0;
-
- /* Choose an additive latency. */
- popts->additive_latency_override = 0;
- popts->additive_latency_override_value = 3;
- if (popts->additive_latency_override) {
- debug("using additive latency override value = %u\n",
- popts->additive_latency_override_value);
- }
-
- /*
- * 2T_EN setting
- *
- * Factors to consider for 2T_EN:
- * - number of DIMMs installed
- * - number of components, number of active ranks
- * - how much time you want to spend playing around
- */
- popts->twoT_en = 0;
- popts->threeT_en = 0;
-
- /*
- * BSTTOPRE precharge interval
- *
- * Set this to 0 for global auto precharge
- *
- * FIXME: Should this be configured in picoseconds?
- * Why it should be in ps: better understanding of this
- * relative to actual DRAM timing parameters such as tRAS.
- * e.g. tRAS(min) = 40 ns
- */
- popts->bstopre = 0x100;
-
- /* Minimum CKE pulse width -- tCKE(MIN) */
- popts->tCKE_clock_pulse_width_ps
- = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
-
- /*
- * Window for four activates -- tFAW
- *
- * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
- * FIXME: varies depending upon number of column addresses or data
- * FIXME: width, was considering looking at pdimm->primary_sdram_width
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->tFAW_window_four_activates_ps = mclk_to_picos(1);
-
-#elif defined(CONFIG_FSL_DDR2)
- /*
- * x4/x8; some datasheets have 35000
- * x16 wide columns only? Use 50000?
- */
- popts->tFAW_window_four_activates_ps = 37500;
-
-#elif defined(CONFIG_FSL_DDR3)
- popts->tFAW_window_four_activates_ps = pdimm[0].tFAW_ps;
-#endif
- popts->zq_en = 0;
- popts->wrlvl_en = 0;
-#if defined(CONFIG_FSL_DDR3)
- /*
- * due to ddr3 dimm is fly-by topology
- * we suggest to enable write leveling to
- * meet the tQDSS under different loading.
- */
- popts->wrlvl_en = 1;
- popts->wrlvl_override = 0;
-#endif
-
- /*
- * Check interleaving configuration from environment.
- * Please refer to doc/README.fsl-ddr for the detail.
- *
- * If memory controller interleaving is enabled, then the data
- * bus widths must be programmed identically for the 2 memory
- * controllers.
- *
- * XXX: Attempt to set both controllers to the same chip select
- * interleaving mode. It will do a best effort to get the
- * requested ranks interleaved together such that the result
- * should be a subset of the requested configuration.
- */
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if ((p = getenv("memctl_intlv_ctl")) != NULL) {
- if (pdimm[0].n_ranks == 0) {
- printf("There is no rank on CS0. Because only rank on "
- "CS0 and ranks chip-select interleaved with CS0"
- " are controller interleaved, force non memory "
- "controller interleaving\n");
- popts->memctl_interleaving = 0;
- } else {
- popts->memctl_interleaving = 1;
- if (strcmp(p, "cacheline") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_CACHE_LINE_INTERLEAVING;
- else if (strcmp(p, "page") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_PAGE_INTERLEAVING;
- else if (strcmp(p, "bank") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_BANK_INTERLEAVING;
- else if (strcmp(p, "superbank") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_SUPERBANK_INTERLEAVING;
- else
- popts->memctl_interleaving_mode =
- simple_strtoul(p, NULL, 0);
- }
- }
-#endif
-
- if( ((p = getenv("ba_intlv_ctl")) != NULL) &&
- (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
- if (strcmp(p, "cs0_cs1") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
- else if (strcmp(p, "cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
- else
- popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0);
-
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- case FSL_DDR_CS0_CS1:
- if (pdimm[0].n_ranks != 2) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for "
- "CS0+CS1, force non-interleaving!\n");
- }
- break;
- case FSL_DDR_CS2_CS3:
- if (pdimm[1].n_ranks !=2){
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS2+CS3, "
- "force non-interleaving!\n");
- }
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS0+CS1 or "
- "CS2+CS3, force non-interleaving!\n");
- }
- break;
- default:
- popts->ba_intlv_ctl = 0;
- break;
- }
- }
-
- fsl_ddr_board_options(popts, pdimm, ctrl_num);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-
-#include "ddr.h"
-
-unsigned int fsl_ddr_get_mem_data_rate(void);
-
-/*
- * Round mclk_ps to nearest 10 ps in memory controller code.
- *
- * If an imprecise data rate is too high due to rounding error
- * propagation, compute a suitably rounded mclk_ps to compute
- * a working memory controller configuration.
- */
-unsigned int get_memory_clk_period_ps(void)
-{
- unsigned int mclk_ps;
-
- mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate();
- /* round to nearest 10 ps */
- return 10 * ((mclk_ps + 5) / 10);
-}
-
-/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
-unsigned int picos_to_mclk(unsigned int picos)
-{
- const unsigned long long ULL_2e12 = 2000000000000ULL;
- const unsigned long long ULL_8Fs = 0xFFFFFFFFULL;
- unsigned long long clks;
- unsigned long long clks_temp;
-
- if (!picos)
- return 0;
-
- clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos;
- clks_temp = clks;
- clks = clks / ULL_2e12;
- if (clks_temp % ULL_2e12) {
- clks++;
- }
-
- if (clks > ULL_8Fs) {
- clks = ULL_8Fs;
- }
-
- return (unsigned int) clks;
-}
-
-unsigned int mclk_to_picos(unsigned int mclk)
-{
- return get_memory_clk_period_ps() * mclk;
-}
-
-void
-__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num)
-{
- unsigned long long base = memctl_common_params->base_address;
- unsigned long long size = memctl_common_params->total_mem;
-
- /*
- * If no DIMMs on this controller, do not proceed any further.
- */
- if (!memctl_common_params->ndimms_present) {
- return;
- }
-
-#if !defined(CONFIG_PHYS_64BIT)
- if (base >= CONFIG_MAX_MEM_MAPPED)
- return;
- if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
- size = CONFIG_MAX_MEM_MAPPED - base;
-#endif
-
- if (ctrl_num == 0) {
- /*
- * Set up LAW for DDR controller 1 space.
- */
- unsigned int lawbar1_target_id = memctl_interleaved
- ? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
-
- if (set_ddr_laws(base, size, lawbar1_target_id) < 0) {
- printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__,
- memctl_interleaved);
- return ;
- }
- } else if (ctrl_num == 1) {
- if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) {
- printf("%s: ERROR (ctrl #1)\n", __func__);
- return ;
- }
- } else {
- printf("%s: unexpected DDR controller number (%u)\n", __func__,
- ctrl_num);
- }
-}
-
-__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
-fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-void board_add_ram_info(int use_default)
-{
-#if defined(CONFIG_MPC85xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- uint32_t cs0_config = in_be32(&ddr->cs0_config);
-#endif
- uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
- int cas_lat;
-
- puts(" (DDR");
- switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
- SDRAM_CFG_SDRAM_TYPE_SHIFT) {
- case SDRAM_TYPE_DDR1:
- puts("1");
- break;
- case SDRAM_TYPE_DDR2:
- puts("2");
- break;
- case SDRAM_TYPE_DDR3:
- puts("3");
- break;
- default:
- puts("?");
- break;
- }
-
- if (sdram_cfg & SDRAM_CFG_32_BE)
- puts(", 32-bit");
- else
- puts(", 64-bit");
-
- /* Calculate CAS latency based on timing cfg values */
- cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
- if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1)
- cas_lat += (8 << 1);
- printf(", CL=%d", cas_lat >> 1);
- if (cas_lat & 0x1)
- puts(".5");
-
- if (sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on)");
- else
- puts(", ECC off)");
-
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if (cs0_config & 0x20000000) {
- puts("\n");
- puts(" DDR Controller Interleaving Mode: ");
-
- switch ((cs0_config >> 24) & 0xf) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- puts("cache line");
- break;
- case FSL_DDR_PAGE_INTERLEAVING:
- puts("page");
- break;
- case FSL_DDR_BANK_INTERLEAVING:
- puts("bank");
- break;
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- puts("super-bank");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-#endif
-
- if ((sdram_cfg >> 8) & 0x7f) {
- puts("\n");
- puts(" DDR Chip-Select Interleaving Mode: ");
- switch(sdram_cfg >> 8 & 0x7f) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- puts("CS0+CS1+CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1:
- puts("CS0+CS1");
- break;
- case FSL_DDR_CS2_CS3:
- puts("CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- puts("CS0+CS1 and CS2+CS3");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-}
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This file is derived from arch/ppc/cpu/mpc85xx/cpu.c and
- * arch/ppc/cpu/mpc86xx/cpu.c. Basically this file contains
- * cpu specific common code for 85xx/86xx processors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-void ft_fixup_num_cores(void *blob) {
- int off, num_cores, del_cores;
-
- del_cores = 0;
- num_cores = cpu_numcores();
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-
- /* if we find a cpu node outside of what we expect delete it
- * and reset the offset back to the start since we can't
- * trust the offsets anymore
- */
- if (*reg > num_cores-1) {
- fdt_del_node(blob, off);
- del_cores++;
- off = -1;
- }
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
- debug ("%x core system found\n", num_cores);
- debug ("deleted %d extra core entry entries from device tree\n",
- del_cores);
-}
+++ /dev/null
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <pci.h>
-
-struct pci_info {
- u32 cfg;
-};
-
-/* The cfg field is a bit mask in which each bit represents the value of
- * cfg_IO_ports[] signal and the bit is set if the interface would be
- * enabled based on the value of cfg_IO_ports[] signal
- *
- * On MPC86xx/PQ3 based systems:
- * we extract cfg_IO_ports from GUTS register PORDEVSR
- *
- * cfg_IO_ports only exist on systems w/PCIe (we set cfg 0 for systems
- * without PCIe)
- */
-
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8560)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
-};
-#elif defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
-};
-#elif defined(CONFIG_MPC8536)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8544)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
- (1 << 6) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 6) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8548)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI_1] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCI_2] = {
- .cfg = 0,
- },
- /* PCI_2 is always host and we dont use iosel to determine enable/disable */
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 3) | (1 << 4) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8568)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 3) | (1 << 4) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8569)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
- (1 << 8) | (1 << 0xc) | (1 << 0xf),
- },
-};
-#elif defined(CONFIG_MPC8572)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 7) |
- (1 << 0xb) | (1 << 0xc) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 3) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8610)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI_1] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 1) | (1 << 4),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0) | (1 << 4),
- },
-};
-#elif defined(CONFIG_MPC8641)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) |
- (1 << 7) | (1 << 0xe) | (1 << 0xf),
- },
-};
-#elif defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
- defined(CONFIG_P1012) || defined(CONFIG_P1021)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 6) | (1 << 0xe) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0xe),
- },
-};
-#elif defined(CONFIG_P1013) || defined(CONFIG_P1022)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xa) |
- (1 << 0xb) | (1 << 0xd) | (1 << 0xe) |
- (1 << 0xf) | (1 << 0x15) | (1 << 0x16) |
- (1 << 0x17) | (1 << 0x18) | (1 << 0x19) |
- (1 << 0x1a) | (1 << 0x1b) | (1 << 0x1c) |
- (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) |
- (1 << 9) | (1 << 0xa) | (1 << 0xb) | (1 << 0xd) |
- (1 << 0x15) | (1 << 0x16) | (1 << 0x17) |
- (1 << 0x18) | (1 << 0x1c),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xd) |
- (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | (1 << 0x18) |
- (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b),
- },
-};
-#elif defined(CONFIG_P2010) || defined(CONFIG_P2020)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6) |
- (1 << 0xd) | (1 << 0xe) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 2) | (1 << 0xe),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 2) | (1 << 4),
- },
-};
-#elif defined(CONFIG_FSL_CORENET)
-#else
-#error Need to define pci_config_info for processor
-#endif
-
-#ifndef CONFIG_FSL_CORENET
-int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel)
-{
- return ((1 << io_sel) & pci_config_info[trgt].cfg);
-}
-#endif
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/40x_spd_sdram.c
- * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
- * SDRAM controller. Those are all current 405 PPC's.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
-
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
-
-/* SDRAM0_CFG enable macro */
-#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
-
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
-
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
-
-#ifdef CONFIG_SPDDRAM_SILENT
-# define SPD_ERR(x) do { return 0; } while (0)
-#else
-# define SPD_ERR(x) do { printf(x); return(0); } while (0)
-#endif
-
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/* function prototypes */
-int spd_read(uint addr);
-
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * Input: null for default I2C spd functions or a pointer to a custom function
- * returning spd_data.
- */
-
-long int spd_sdram(int(read_spd)(uint addr))
-{
- int tmp,row,col;
- int total_size,bank_size,bank_code;
- int ecc_on;
- int mode;
- int bank_cnt;
-
- int sdram0_pmit=0x07c00000;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0 = -1;
- int sdram0_besr1 = -1;
- int sdram0_eccesr = -1;
-#endif
- int sdram0_ecccfg;
-
- int sdram0_rtr=0;
- int sdram0_tr=0;
-
- int sdram0_b0cr;
- int sdram0_b1cr;
- int sdram0_b2cr;
- int sdram0_b3cr;
-
- int sdram0_cfg=0;
-
- int t_rp;
- int t_rcd;
- int t_ras;
- int t_rc;
- int min_cas;
-
- PPC4xx_SYS_INFO sys_info;
- unsigned long bus_period_x_10;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- if (read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- }
-
- /* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04) {
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
- /* ------------------------------------------------------------------
- * configure memory timing register
- *
- * data from DIMM:
- * 27 IN Row Precharge Time ( t RP)
- * 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- * -------------------------------------------------------------------*/
-
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
-
- tmp = read_spd(127) & 0x6;
- if (tmp == 0x02) { /* only cas = 2 supported */
- min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
- min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
- min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
- } else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
- }
-
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
-
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
- if (tmp < 1)
- tmp = 1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
- if (tmp < 0)
- tmp = 0;
- if (tmp > 6)
- tmp = 6;
- sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-
-
- /*------------------------------------------------------------------
- * configure RTR register
- * -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch (tmp) {
- case 0x00:
- tmp = 15625;
- break;
- case 0x01:
- tmp = 15625 / 4;
- break;
- case 0x02:
- tmp = 15625 / 2;
- break;
- case 0x03:
- tmp = 15625 * 2;
- break;
- case 0x04:
- tmp = 15625 * 4;
- break;
- case 0x05:
- tmp = 15625 * 8;
- break;
- default:
- SPD_ERR("SDRAM - Bad refresh period \n");
- }
- /* convert from nsec to bus cycles */
- tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-
- /*------------------------------------------------------------------
- * determine the number of banks used
- * -------------------------------------------------------------------*/
- /* byte 7:6 is module data width */
- if (read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
- tmp = read_spd(6);
- if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
- else if (tmp < 64)
- bank_cnt = 1; /* one bank per sdram side */
- else if (tmp < 73)
- bank_cnt = 2; /* need two banks per side */
- else if (tmp < 161)
- bank_cnt = 4; /* need four banks per side */
- else
- SPD_ERR("SDRAM - unsupported module width\n");
-
- /* byte 5 is the module row count (refered to as dimm "sides") */
- tmp = read_spd(5);
- if (tmp == 1)
- ;
- else if (tmp==2)
- bank_cnt *= 2;
- else if (tmp==4)
- bank_cnt *= 4;
- else
- bank_cnt = 8; /* 8 is an error code */
-
- if (bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
-
- /* now check for ECC ability of module. We only support ECC
- * on 32 bit wide devices with 8 bit ECC.
- */
- if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
- sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- } else {
- sdram0_ecccfg = 0;
- ecc_on = 0;
- }
-
- /*------------------------------------------------------------------
- * calculate total size
- * -------------------------------------------------------------------*/
- /* calculate total size and do sanity check */
- tmp = read_spd(31);
- total_size = 1 << 22; /* total_size = 4MB */
- /* now multiply 4M by the smallest device row density */
- /* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)) {
- total_size = total_size << 1;
- tmp = tmp >> 1;
- }
- total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-
- /*------------------------------------------------------------------
- * map rows * cols * banks to a mode
- * -------------------------------------------------------------------*/
-
- switch (row) {
- case 11:
- switch (col) {
- case 8:
- mode=4; /* mode 5 */
- break;
- case 9:
- case 10:
- mode=0; /* mode 1 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 12:
- switch (col) {
- case 8:
- mode=3; /* mode 4 */
- break;
- case 9:
- case 10:
- mode=1; /* mode 2 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 13:
- switch (col) {
- case 8:
- mode=5; /* mode 6 */
- break;
- case 9:
- case 10:
- if (read_spd(17) == 2)
- mode = 6; /* mode 7 */
- else
- mode = 2; /* mode 3 */
- break;
- case 11:
- mode = 2; /* mode 3 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
-
- /*------------------------------------------------------------------
- * using the calculated values, compute the bank
- * config register values.
- * -------------------------------------------------------------------*/
- sdram0_b1cr = 0;
- sdram0_b2cr = 0;
- sdram0_b3cr = 0;
-
- /* compute the size of each bank */
- bank_size = total_size / bank_cnt;
- /* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
- bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
- bank_code++; /* and stores result in bank_code */
- tmp = tmp >> 1;
- } /* bank_code is now log2(bank_size) */
- bank_code -= 22; /* subtract 22 to get the code */
-
- tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size * 0) | tmp;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- if (bank_cnt > 1)
- sdram0_b2cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- sdram0_b1cr = (bank_size * 2) | tmp;
- if (bank_cnt > 3)
- sdram0_b3cr = (bank_size * 3) | tmp;
-#else
- /* PPC405EP chip only supports two SDRAM banks */
- if (bank_cnt > 1)
- sdram0_b1cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- total_size = 2 * bank_size;
-#endif
-
- /*
- * enable sdram controller DCE=1
- * enable burst read prefetch to 32 bytes BRPF=2
- * leave other functions off
- */
-
- /*------------------------------------------------------------------
- * now that we've done our calculations, we are ready to
- * program all the registers.
- * -------------------------------------------------------------------*/
-
- /* disable memcontroller so updates work */
- mtsdram(SDRAM0_CFG, 0);
-
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_BESR0, sdram0_besr0);
- mtsdram(SDRAM0_BESR1, sdram0_besr1);
- mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
- mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
-#endif
- mtsdram(SDRAM0_RTR, sdram0_rtr);
- mtsdram(SDRAM0_PMIT, sdram0_pmit);
- mtsdram(SDRAM0_B0CR, sdram0_b0cr);
- mtsdram(SDRAM0_B1CR, sdram0_b1cr);
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_B2CR, sdram0_b2cr);
- mtsdram(SDRAM0_B3CR, sdram0_b3cr);
-#endif
- mtsdram(SDRAM0_TR, sdram0_tr);
-
- /* SDRAM have a power on delay, 500 micro should do */
- udelay(500);
- sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if (ecc_on)
- sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram(SDRAM0_CFG, sdram0_cfg);
-
- return (total_size);
-}
-
-int spd_read(uint addr)
-{
- uchar data[2];
-
- if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
- return (int)data[0];
- else
- return 0;
-}
-
-#endif /* CONFIG_SPD_EEPROM */
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/44x_spd_ddr.c
- * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
- * DDR controller. Those are 440GP/GX/EP/GR.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-#include <asm/mmu.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR))
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*-----------------------------------------------------------------------------+
- | General Definition
- +-----------------------------------------------------------------------------*/
-#define DEFAULT_SPD_ADDR1 0x53
-#define DEFAULT_SPD_ADDR2 0x52
-#define MAXBANKS 4 /* at most 4 dimm banks */
-#define MAX_SPD_BYTES 256
-#define NUMHALFCYCLES 4
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define MAXBXCR 4
-#define TRUE 1
-#define FALSE 0
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/* bank_parms is used to sort the bank sizes by descending order */
-struct bank_param {
- unsigned long cr;
- unsigned long bank_size_bytes;
-};
-
-typedef struct bank_param BANKPARMS;
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
-extern const unsigned char cfg_simulate_spd_eeprom[128];
-#endif
-
-static unsigned char spd_read(uchar chip, uint addr);
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr1(void);
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * BUG: Don't handle ECC memory
- * BUG: A few values in the TR register is currently hardcoded
- */
-long int spd_sdram(void) {
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
- unsigned long total_size;
- unsigned long cfg0;
- unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*
- * Read the SPD information using I2C interface. Check to see if the
- * DIMM slots are populated.
- */
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the memory type for the dimms plugged.
- */
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the voltage type for the dimms plugged.
- */
- check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG0)
- */
- program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG1)
- */
- program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM refresh register (SDRAM0_RTR)
- */
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM Timing Register 0 (SDRAM0_TR0)
- */
- program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program the BxCR registers to find out total sdram installed
- */
- total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
- num_dimm_banks);
-
-#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
- /* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
-#endif
-
- /*
- * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
- */
- mtsdram(SDRAM0_CLKTR, 0x40000000);
-
- /*
- * delay to ensure 200 usec has elapsed
- */
- udelay(400);
-
- /*
- * enable the memory controller
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
-
- /*
- * wait for SDRAM_CFG0_DC_EN to complete
- */
- while (1) {
- mfsdram(SDRAM0_MCSTS, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
- break;
- }
-
- /*
- * program SDRAM Timing Register 1, adding some delays
- */
- program_tr1();
-
-#ifdef CONFIG_DDR_ECC
- /*
- * If ecc is enabled, initialize the parity bits.
- */
- ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
-#endif
-
- return total_size;
-}
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
- if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
- /*
- * Onboard spd eeprom requested -> simulate values
- */
- return cfg_simulate_spd_eeprom[addr];
- }
-#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
-
- if (i2c_probe(chip) == 0) {
- if (i2c_read(chip, addr, 1, data, 1) == 0) {
- return data[0];
- }
- }
-
- return 0;
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned char dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 7:
- debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
- break;
- default:
- printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
- dimm_num);
- printf("Only DDR SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (voltage_type != 0x04) {
- printf("ERROR: DIMM %lu with unsupported voltage level.\n",
- dimm_num);
- spd_ddr_init_hang ();
- } else {
- debug("DIMM %lu voltage level supported.\n", dimm_num);
- }
- break;
- }
- }
-}
-
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long cfg0;
- unsigned long ecc_enabled;
- unsigned char ecc;
- unsigned char attributes;
- unsigned long data_width;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
-
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(SDRAM0_CFG0, cfg0);
-
- /*
- * clear bits
- */
- cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
- SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
- SDRAM_CFG0_DMWD_MASK |
- SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
-
-
- /*
- * FIXME: assume the DDR SDRAMs in both banks are the same
- */
- ecc_enabled = TRUE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) {
- ecc_enabled = FALSE;
- }
-
- /*
- * program Registered DIMM Enable
- */
- attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
- if ((attributes & 0x02) != 0x00) {
- cfg0 |= SDRAM_CFG0_RDEN;
- }
-
- /*
- * program DDR SDRAM Data Width
- */
- data_width =
- (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
- if (data_width == 64 || data_width == 72) {
- dimm_64bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_64;
- } else if (data_width == 32 || data_width == 40) {
- dimm_32bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_32;
- } else {
- printf("WARNING: DIMM with datawidth of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- spd_ddr_init_hang ();
- }
- break;
- }
- }
-
- /*
- * program Memory Data Error Checking
- */
- if (ecc_enabled == TRUE) {
- cfg0 |= SDRAM_CFG0_MCHK_GEN;
- } else {
- cfg0 |= SDRAM_CFG0_MCHK_NON;
- }
-
- /*
- * program Page Management Unit (0 == enabled)
- */
- cfg0 &= ~SDRAM_CFG0_PMUD;
-
- /*
- * program Memory Controller Options 0
- * Note: DCEN must be enabled after all DDR SDRAM controller
- * configuration registers get initialized.
- */
- mtsdram(SDRAM0_CFG0, cfg0);
-}
-
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long cfg1;
- mfsdram(SDRAM0_CFG1, cfg1);
-
- /*
- * Self-refresh exit, disable PM
- */
- cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
-
- /*
- * program Memory Controller Options 1
- */
- mtsdram(SDRAM0_CFG1, cfg1);
-}
-
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bus_period_x_10;
- unsigned long refresh_rate = 0;
- unsigned char refresh_rate_type;
- unsigned long refresh_interval;
- unsigned long sdram_rtr;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
- switch (refresh_rate_type) {
- case 0x00:
- refresh_rate = 15625;
- break;
- case 0x01:
- refresh_rate = 15625/4;
- break;
- case 0x02:
- refresh_rate = 15625/2;
- break;
- case 0x03:
- refresh_rate = 15626*2;
- break;
- case 0x04:
- refresh_rate = 15625*4;
- break;
- case 0x05:
- refresh_rate = 15625*8;
- break;
- default:
- printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
- dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n");
- break;
- }
-
- break;
- }
- }
-
- refresh_interval = refresh_rate * 10 / bus_period_x_10;
- sdram_rtr = (refresh_interval & 0x3ff8) << 16;
-
- /*
- * program Refresh Timer Register (SDRAM0_RTR)
- */
- mtsdram(SDRAM0_RTR, sdram_rtr);
-}
-
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tr0;
- unsigned char wcsbc;
- unsigned char t_rp_ns;
- unsigned char t_rcd_ns;
- unsigned char t_ras_ns;
- unsigned long t_rp_clk;
- unsigned long t_ras_rcd_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rfc_clk;
- unsigned long plb_check;
- unsigned char cas_bit;
- unsigned long cas_index;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned long cycle_time_ns_x_10[3];
- unsigned long tcyc_3_0_ns_x_10;
- unsigned long tcyc_2_5_ns_x_10;
- unsigned long tcyc_2_0_ns_x_10;
- unsigned long tcyc_reg;
- unsigned long bus_period_x_10;
- PPC4xx_SYS_INFO sys_info;
- unsigned long residue;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR0, tr0);
- tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
- SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
- SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
- SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
-
- /*
- * initialization
- */
- wcsbc = 0;
- t_rp_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- tcyc_2_0_ns_x_10 = 0;
- tcyc_2_5_ns_x_10 = 0;
- tcyc_3_0_ns_x_10 = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
- t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
- t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
- dimm_num);
- spd_ddr_init_hang ();
- }
-
- cycle_time_ns_x_10[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
- }
-
- cas_index = 0;
-
- if ((cas_bit & 0x80) != 0) {
- cas_index += 3;
- } else if ((cas_bit & 0x40) != 0) {
- cas_index += 2;
- } else if ((cas_bit & 0x20) != 0) {
- cas_index += 1;
- }
-
- if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
- tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
- tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
- tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_0_available = FALSE;
- }
-
- break;
- }
- }
-
- /*
- * Program SD_WR and SD_WCSBC fields
- */
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
- switch (wcsbc) {
- case 0:
- tr0 |= SDRAM_TR0_SDWD_0_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDWD_1_CLK;
- break;
- }
-
- /*
- * Program SD_CASL field
- */
- if ((cas_2_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
- } else if ((cas_2_5_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
- } else if ((cas_3_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
- } else {
- printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
- printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * Calculate Trp in clock cycles and round up if necessary
- * Program SD_PTA field
- */
- t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rp_clk++;
- }
- switch ((unsigned long)t_rp_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDPA_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDPA_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDPA_4_CLK;
- break;
- }
-
- /*
- * Program SD_CTP field
- */
- t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
- plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
- if (sys_info.freqPLB != plb_check) {
- t_ras_rcd_clk++;
- }
- switch (t_ras_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDCP_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDCP_3_CLK;
- break;
- case 4:
- tr0 |= SDRAM_TR0_SDCP_4_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDCP_5_CLK;
- break;
- }
-
- /*
- * Program SD_LDF field
- */
- tr0 |= SDRAM_TR0_SDLD_2_CLK;
-
- /*
- * Program SD_RFTA field
- * FIXME tRFC hardcoded as 75 nanoseconds
- */
- t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
- residue = sys_info.freqPLB % (ONE_BILLION / 75);
- if (residue >= (ONE_BILLION / 150)) {
- t_rfc_clk++;
- }
- switch (t_rfc_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- tr0 |= SDRAM_TR0_SDRA_6_CLK;
- break;
- case 7:
- tr0 |= SDRAM_TR0_SDRA_7_CLK;
- break;
- case 8:
- tr0 |= SDRAM_TR0_SDRA_8_CLK;
- break;
- case 9:
- tr0 |= SDRAM_TR0_SDRA_9_CLK;
- break;
- case 10:
- tr0 |= SDRAM_TR0_SDRA_10_CLK;
- break;
- case 11:
- tr0 |= SDRAM_TR0_SDRA_11_CLK;
- break;
- case 12:
- tr0 |= SDRAM_TR0_SDRA_12_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRA_13_CLK;
- break;
- }
-
- /*
- * Program SD_RCD field
- */
- t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rcd_clk++;
- }
- switch (t_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDRD_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDRD_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRD_4_CLK;
- break;
- }
-
- debug("tr0: %x\n", tr0);
- mtsdram(SDRAM0_TR0, tr0);
-}
-
-static int short_mem_test(void)
-{
- unsigned long i, j;
- unsigned long bxcr_num;
- unsigned long *membase;
- const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
-
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
- if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
-
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- /* printf("bank enabled base:%x\n", &membase[j]); */
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- return 0;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- if (j < NUMMEMWORDS)
- return 0;
- }
-
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS)
- return 0;
- }
- }
-
- return 1;
-}
-
-static void program_tr1(void)
-{
- unsigned long tr0;
- unsigned long tr1;
- unsigned long cfg0;
- unsigned long ecc_temp;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long k;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- unsigned long rdclt;
- unsigned long rdclt_offset;
- long max_start;
- long max_end;
- long rdclt_average;
- unsigned char window_found;
- unsigned char fail_found;
- unsigned char pass_found;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR1, tr1);
- tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
- SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
-
- mfsdram(SDRAM0_TR0, tr0);
- if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
- (sys_info.freqPLB > 100000000)) {
- tr1 |= SDRAM_TR1_RDSS_TR2;
- tr1 |= SDRAM_TR1_RDSL_STAGE3;
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDSS_TR1;
- tr1 |= SDRAM_TR1_RDSL_STAGE2;
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * save CFG0 ECC setting to a temporary variable and turn ECC off
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM0_DLYCAL, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- rdclt_offset = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
- debug("Starting memory test ");
-
- for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
- /*
- * Set the timing reg for the test.
- */
- mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
-
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0) {
- current_start = rdclt_offset + rdclt;
- }
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rdclt_offset + rdclt;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val>>2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- }
- debug(".");
-
- if (window_found == TRUE) {
- break;
- }
-
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- rdclt_offset += dly_val;
- }
- debug("\n");
-
- /*
- * make sure we find the window
- */
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * restore the orignal ECC setting
- */
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
-
- /*
- * set the SDRAM TR1 RDCD value
- */
- tr1 &= ~SDRAM_TR1_RDCD_MASK;
- if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * set the SDRAM TR1 RDCLT value
- */
- tr1 &= ~SDRAM_TR1_RDCT_MASK;
- while (max_end >= (dly_val << 1)) {
- max_end -= (dly_val << 1);
- max_start -= (dly_val << 1);
- }
-
- rdclt_average = ((max_start + max_end) >> 1);
-
- if (rdclt_average < 0) {
- rdclt_average = 0;
- }
-
- if (rdclt_average >= dly_val) {
- rdclt_average -= dly_val;
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- }
- tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
-
- debug("tr1: %x\n", tr1);
-
- /*
- * program SDRAM Timing Register 1 TR1
- */
- mtsdram(SDRAM0_TR1, tr1);
-}
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bank_base_addr;
- unsigned long cr;
- unsigned long i;
- unsigned long j;
- unsigned long temp;
- unsigned char num_row_addr;
- unsigned char num_col_addr;
- unsigned char num_banks;
- unsigned char bank_size_id;
- unsigned long ctrl_bank_num[MAXBANKS];
- unsigned long bx_cr_num;
- unsigned long largest_size_index;
- unsigned long largest_size;
- unsigned long current_size_index;
- BANKPARMS bank_parms[MAXBXCR];
- unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
- unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
-
- /*
- * Set the BxCR regs. First, wipe out the bank config registers.
- */
- for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
- mtdcr(SDRAM0_CFGDATA, 0x00000000);
- bank_parms[bx_cr_num].bank_size_bytes = 0;
- }
-
-#ifdef CONFIG_BAMBOO
- /*
- * This next section is hardware dependent and must be programmed
- * to match the hardware. For bamboo, the following holds...
- * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
- * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
- * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
- * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
- * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 3;
-#else
- /*
- * Ocotea, Ebony and the other IBM/AMCC eval boards have
- * 2 DIMM slots with each max 2 banks
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 2;
-#endif
-
- /*
- * reset the bank_base address
- */
- bank_base_addr = CONFIG_SYS_SDRAM_BASE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
- bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
- debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
- num_row_addr, num_col_addr, num_banks);
-
- /*
- * Set the SDRAM0_BxCR regs
- */
- cr = 0;
- switch (bank_size_id) {
- case 0x02:
- cr |= SDRAM_BXCR_SDSZ_8;
- break;
- case 0x04:
- cr |= SDRAM_BXCR_SDSZ_16;
- break;
- case 0x08:
- cr |= SDRAM_BXCR_SDSZ_32;
- break;
- case 0x10:
- cr |= SDRAM_BXCR_SDSZ_64;
- break;
- case 0x20:
- cr |= SDRAM_BXCR_SDSZ_128;
- break;
- case 0x40:
- cr |= SDRAM_BXCR_SDSZ_256;
- break;
- case 0x80:
- cr |= SDRAM_BXCR_SDSZ_512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- bank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- switch (num_col_addr) {
- case 0x08:
- cr |= SDRAM_BXCR_SDAM_1;
- break;
- case 0x09:
- cr |= SDRAM_BXCR_SDAM_2;
- break;
- case 0x0A:
- cr |= SDRAM_BXCR_SDAM_3;
- break;
- case 0x0B:
- cr |= SDRAM_BXCR_SDAM_4;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * enable the bank
- */
- cr |= SDRAM_BXCR_SDBE;
-
- for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
- (4 << 20) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
- debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
- dimm_num, i, ctrl_bank_num[dimm_num]+i,
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- }
- }
- }
-
- /* Initialize sort tables */
- for (i = 0; i < MAXBXCR; i++) {
- sorted_bank_num[i] = i;
- sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
- }
-
- for (i = 0; i < MAXBXCR-1; i++) {
- largest_size = sorted_bank_size[i];
- largest_size_index = 255;
-
- /* Find the largest remaining value */
- for (j = i + 1; j < MAXBXCR; j++) {
- if (sorted_bank_size[j] > largest_size) {
- /* Save largest remaining value and its index */
- largest_size = sorted_bank_size[j];
- largest_size_index = j;
- }
- }
-
- if (largest_size_index != 255) {
- /* Swap the current and largest values */
- current_size_index = sorted_bank_num[largest_size_index];
- sorted_bank_size[largest_size_index] = sorted_bank_size[i];
- sorted_bank_size[i] = largest_size;
- sorted_bank_num[largest_size_index] = sorted_bank_num[i];
- sorted_bank_num[i] = current_size_index;
- }
- }
-
- /* Set the SDRAM0_BxCR regs thanks to sort tables */
- for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
- temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
- temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
- bank_parms[sorted_bank_num[bx_cr_num]].cr;
- mtdcr(SDRAM0_CFGDATA, temp);
- bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
- debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
- }
- }
-
- return(bank_base_addr);
-}
-#endif /* CONFIG_SPD_EEPROM */
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX(r)
- * 440/460: 440SP/440SPe/460EX/460GT
- *
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
-
- * (C) Copyright 2007-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
-#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
- do { \
- u32 data; \
- mfsdram(SDRAM_##mnemonic, data); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
- do { \
- u32 data; \
- data = mfdcr(SDRAM_##mnemonic); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#if defined(CONFIG_440)
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
- * memory region. Right now the cache should still be disabled in U-Boot
- * because of the EMAC driver, that need its buffer descriptor to be located
- * in non cached memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-/* enable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE 0
-#else
-/* disable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
-#endif /* CONFIG_4xx_DCACHE */
-
-void dcbz_area(u32 start_address, u32 num_bytes);
-#endif /* CONFIG_440 */
-
-#define MAXRANKS 4
-#define MAXBXCF 4
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#if !defined(CONFIG_NAND_SPL)
-/*-----------------------------------------------------------------------------+
- * sdram_memsize
- *-----------------------------------------------------------------------------*/
-phys_size_t sdram_memsize(void)
-{
- phys_size_t mem_size;
- unsigned long mcopt2;
- unsigned long mcstat;
- unsigned long mb0cf;
- unsigned long sdsz;
- unsigned long i;
-
- mem_size = 0;
-
- mfsdram(SDRAM_MCOPT2, mcopt2);
- mfsdram(SDRAM_MCSTAT, mcstat);
-
- /* DDR controller must be enabled and not in self-refresh. */
- /* Otherwise memsize is zero. */
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
- for (i = 0; i < MAXBXCF; i++) {
- mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
- /* Banks enabled */
- if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-#if defined(CONFIG_440)
- sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
-#else
- sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK;
-#endif
- switch(sdsz) {
- case SDRAM_RXBAS_SDSZ_8:
- mem_size+=8;
- break;
- case SDRAM_RXBAS_SDSZ_16:
- mem_size+=16;
- break;
- case SDRAM_RXBAS_SDSZ_32:
- mem_size+=32;
- break;
- case SDRAM_RXBAS_SDSZ_64:
- mem_size+=64;
- break;
- case SDRAM_RXBAS_SDSZ_128:
- mem_size+=128;
- break;
- case SDRAM_RXBAS_SDSZ_256:
- mem_size+=256;
- break;
- case SDRAM_RXBAS_SDSZ_512:
- mem_size+=512;
- break;
- case SDRAM_RXBAS_SDSZ_1024:
- mem_size+=1024;
- break;
- case SDRAM_RXBAS_SDSZ_2048:
- mem_size+=2048;
- break;
- case SDRAM_RXBAS_SDSZ_4096:
- mem_size+=4096;
- break;
- default:
- printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
- , sdsz);
- mem_size=0;
- break;
- }
- }
- }
- }
-
- return mem_size << 20;
-}
-
-/*-----------------------------------------------------------------------------+
- * is_ecc_enabled
- *-----------------------------------------------------------------------------*/
-static unsigned long is_ecc_enabled(void)
-{
- unsigned long val;
-
- mfsdram(SDRAM_MCOPT1, val);
-
- return SDRAM_MCOPT1_MCHK_CHK_DECODE(val);
-}
-
-/*-----------------------------------------------------------------------------+
- * board_add_ram_info
- *-----------------------------------------------------------------------------*/
-void board_add_ram_info(int use_default)
-{
- PPC4xx_SYS_INFO board_cfg;
- u32 val;
-
- if (is_ecc_enabled())
- puts(" (ECC");
- else
- puts(" (ECC not");
-
- get_sys_info(&board_cfg);
-
-#if defined(CONFIG_405EX)
- val = board_cfg.freqPLB;
-#else
- mfsdr(SDR0_DDR0, val);
- val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1);
-#endif
- printf(" enabled, %d MHz", (val * 2) / 1000000);
-
- mfsdram(SDRAM_MMODE, val);
- val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
- printf(", CL%d)", val);
-}
-#endif /* !CONFIG_NAND_SPL */
-
-#if defined(CONFIG_SPD_EEPROM)
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define SDRAM_DDR1 1
-#define SDRAM_DDR2 2
-#define SDRAM_NONE 0
-
-#define MAXDIMMS 2
-#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
-
-#define ONE_BILLION 1000000000
-
-#define CMD_NOP (7 << 19)
-#define CMD_PRECHARGE (2 << 19)
-#define CMD_REFRESH (1 << 19)
-#define CMD_EMR (0 << 19)
-#define CMD_READ (5 << 19)
-#define CMD_WRITE (4 << 19)
-
-#define SELECT_MR (0 << 16)
-#define SELECT_EMR (1 << 16)
-#define SELECT_EMR2 (2 << 16)
-#define SELECT_EMR3 (3 << 16)
-
-/* MR */
-#define DLL_RESET 0x00000100
-
-#define WRITE_RECOV_2 (1 << 9)
-#define WRITE_RECOV_3 (2 << 9)
-#define WRITE_RECOV_4 (3 << 9)
-#define WRITE_RECOV_5 (4 << 9)
-#define WRITE_RECOV_6 (5 << 9)
-
-#define BURST_LEN_4 0x00000002
-
-/* EMR */
-#define ODT_0_OHM 0x00000000
-#define ODT_50_OHM 0x00000044
-#define ODT_75_OHM 0x00000004
-#define ODT_150_OHM 0x00000040
-
-#define ODS_FULL 0x00000000
-#define ODS_REDUCED 0x00000002
-#define OCD_CALIB_DEF 0x00000380
-
-/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
-#define ODT_EB0R (0x80000000 >> 8)
-#define ODT_EB0W (0x80000000 >> 7)
-#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
-#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
-#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
-
-/* Defines for the Read Cycle Delay test */
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define NUMLOOPS 64 /* memory test loops */
-
-/*
- * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
- * To support such configurations, we "only" map the first 2GB via the TLB's. We
- * need some free virtual address space for the remaining peripherals like, SoC
- * devices, FLASH etc.
- *
- * Note that ECC is currently not supported on configurations with more than 2GB
- * SDRAM. This is because we only map the first 2GB on such systems, and therefore
- * the ECC parity byte of the remaining area can't be written.
- */
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-
-/* Private Structure Definitions */
-
-/* enum only to ease code for cas latency setting */
-typedef enum ddr_cas_id {
- DDR_CAS_2 = 20,
- DDR_CAS_2_5 = 25,
- DDR_CAS_3 = 30,
- DDR_CAS_4 = 40,
- DDR_CAS_5 = 50
-} ddr_cas_id_t;
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery);
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery);
-#ifdef CONFIG_DDR_ECC
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value);
-#endif
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
-static void test(void);
-#else
-static void DQS_calibration_process(void);
-#endif
-#endif
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
- if (i2c_probe(chip) == 0)
- if (i2c_read(chip, addr, 1, data, 1) == 0)
- return data[0];
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned char spd0[MAX_SPD_BYTES];
- unsigned char spd1[MAX_SPD_BYTES];
- unsigned char *dimm_spd[MAXDIMMS];
- unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
- unsigned long num_dimm_banks; /* on board dimm banks */
- unsigned long val;
- ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
- int write_recovery;
- phys_size_t dram_size = 0;
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*------------------------------------------------------------------
- * Set up an array of SPD matrixes.
- *-----------------------------------------------------------------*/
- dimm_spd[0] = spd0;
- dimm_spd[1] = spd1;
-
- /*------------------------------------------------------------------
- * Reset the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdr(SDR0_SRST, (0x80000000 >> 10));
- mtsdr(SDR0_SRST, 0x00000000);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
-
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the memory type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the total rank number.
- *-----------------------------------------------------------------*/
- check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Except Enabling of the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val &
- ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
- SDRAM_MCOPT2_ISIE_MASK))
- | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
- SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
- SDRAM_MCOPT2_ISIE_ENABLE));
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 1 register
- * Note: Does not enable the memory controller.
- *-----------------------------------------------------------------*/
- program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM refresh register.
- *-----------------------------------------------------------------*/
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM mode register.
- *-----------------------------------------------------------------*/
- program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- &selected_cas, &write_recovery);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
-
- /*------------------------------------------------------------------
- * Set the SDRAM Clock Timing Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CLKTR, val);
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
- ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
-
- /*------------------------------------------------------------------
- * Program the BxCF registers.
- *-----------------------------------------------------------------*/
- program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM timing registers.
- *-----------------------------------------------------------------*/
- program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the Extended Mode register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MEMODE, val);
- mtsdram(SDRAM_MEMODE,
- (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
- SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
- (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
- | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
-
- /*------------------------------------------------------------------
- * Program Initialization preload registers.
- *-----------------------------------------------------------------*/
- program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- selected_cas, write_recovery);
-
- /*------------------------------------------------------------------
- * Delay to ensure 200usec have elapsed since reset.
- *-----------------------------------------------------------------*/
- udelay(400);
-
- /*------------------------------------------------------------------
- * Set the memory queue core base addr.
- *-----------------------------------------------------------------*/
- program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Enable the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
- SDRAM_MCOPT2_IPTR_EXECUTE);
-
- /*------------------------------------------------------------------
- * Wait for IPTR_EXECUTE init sequence to complete.
- *-----------------------------------------------------------------*/
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
-
- /* enable the controller only after init sequence completes */
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
-
- /* Make sure delay-line calibration is done before proceeding */
- do {
- mfsdram(SDRAM_DLCR, val);
- } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
-
- /* get installed memory size */
- dram_size = sdram_memsize();
-
- /*
- * Limit size to 2GB
- */
- if (dram_size > CONFIG_MAX_MEM_MAPPED)
- dram_size = CONFIG_MAX_MEM_MAPPED;
-
- /* and program tlb entries for this size (dynamic) */
-
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, dram_size, 0);
-
- /*------------------------------------------------------------------
- * DQS calibration.
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- DQS_autocalibration();
-#else
- program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#endif
-
-#ifdef CONFIG_DDR_ECC
- /*------------------------------------------------------------------
- * If ecc is enabled, initialize the parity bits.
- *-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
-#endif
-
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, dram_size);
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
-
- ppc4xx_ibm_ddr2_register_dump();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- return sdram_memsize();
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- debug("\nspd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], num_of_bytes);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- debug("spd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], total_size);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that they
- * really are DDR specific DIMMs.
- *-----------------------------------------------------------------*/
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
- "slot %d.\n", (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 2:
- printf("ERROR: EDO DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 4:
- printf("ERROR: SDRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 6:
- printf("ERROR: SGRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 7:
- debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR1;
- break;
- case 8:
- debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR2;
- break;
- default:
- printf("ERROR: Unknown DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
- for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
- if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
- && (dimm_populated[dimm_num] != SDRAM_NONE)
- && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
- printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tcyc_reg;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in multiple of 10 picoseconds
- * to match the way DIMM cycle time is calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- /*
- * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
- * the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns;
- * the value presented by the lower order nibble (bits 0-3)
- * has a granularity of .1ns and is added to the value designated
- * by the higher nibble. In addition, four lines of the lower order
- * nibble are assigned to support +.25,+.33, +.66 and +.75.
- */
- /* Convert from hex to decimal */
- if ((tcyc_reg & 0x0F) == 0x0D)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- else if ((tcyc_reg & 0x0F) == 0x0C)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
- else if ((tcyc_reg & 0x0F) == 0x0B)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
- else if ((tcyc_reg & 0x0F) == 0x0A)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
- else
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time.
- * The additionnal 100ps is here to accept a small incertainty.
- */
- printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)(cycle_time*10),
- (unsigned int)dimm_num,
- (unsigned int)(calc_cycle_time*10));
- printf("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang ();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies two
- * ranks/banks maximum are availables.
- *-----------------------------------------------------------------*/
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_rank;
- unsigned long total_rank = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- dimm_rank = (dimm_rank & 0x0F) +1;
- else
- dimm_rank = dimm_rank & 0x0F;
-
-
- if (dimm_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with %lu ranks in "
- "slot %lu is not supported.\n", dimm_rank, dimm_num);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- } else
- total_rank += dimm_rank;
- }
- if (total_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with a total of %d ranks "
- "for all slots.\n", (unsigned int)total_rank);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Remove one of the DIMM modules.\n\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * only support 2.5V modules.
- * This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- switch (voltage_type) {
- case 0x00:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 5.0 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x01:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is LVTTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x02:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 1.5 Volt.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x03:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 3.3 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x04:
- /* 2.5 Voltage only for DDR1 */
- break;
- case 0x05:
- /* 1.8 Voltage only for DDR2 */
- break;
- default:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------------+
- * program_copt1.
- *-----------------------------------------------------------------------------*/
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long mcopt1;
- unsigned long ecc_enabled;
- unsigned long ecc = 0;
- unsigned long data_width = 0;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
- unsigned long registered = 0;
- unsigned long attribute = 0;
- unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- unsigned long bankcount;
- unsigned long ddrtype;
- unsigned long val;
-
-#ifdef CONFIG_DDR_ECC
- ecc_enabled = TRUE;
-#else
- ecc_enabled = FALSE;
-#endif
- dimm_32bit = FALSE;
- dimm_64bit = FALSE;
- buf0 = FALSE;
- buf1 = FALSE;
-
- /*------------------------------------------------------------------
- * Set memory controller options reg 1, SDRAM_MCOPT1.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, val);
- mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
- SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
- SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
- SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
- SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
- SDRAM_MCOPT1_DREF_MASK);
-
- mcopt1 |= SDRAM_MCOPT1_QDEP;
- mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
- mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- /* test ecc support */
- ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) /* ecc not supported */
- ecc_enabled = FALSE;
-
- /* test bank count */
- bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
- if (bankcount == 0x04) /* bank count = 4 */
- mcopt1 |= SDRAM_MCOPT1_4_BANKS;
- else /* bank count = 8 */
- mcopt1 |= SDRAM_MCOPT1_8_BANKS;
-
- /* test DDR type */
- ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
- /* test for buffered/unbuffered, registered, differential clocks */
- registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
- attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
-
- /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- if (dimm_num == 0) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) { /* DDR2 always buffered */
- /* TODO: what about above comments ? */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- } else {
- /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf0 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- }
- }
- }
- else if (dimm_num == 1) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) {
- /* DDR2 always buffered */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- } else {
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf1 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- }
- }
- }
-
- /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
- data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
-
- switch (data_width) {
- case 72:
- case 64:
- dimm_64bit = TRUE;
- break;
- case 40:
- case 32:
- dimm_32bit = TRUE;
- break;
- default:
- printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
- break;
- }
- }
- }
-
- /* verify matching properties */
- if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
- if (buf0 != buf1) {
- printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
- printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
- spd_ddr_init_hang ();
- }
- else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_64;
- } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_32;
- } else {
- printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
-
- if (ecc_enabled == TRUE)
- mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
- else
- mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
-
- mtsdram(SDRAM_MCOPT1, mcopt1);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_codt.
- *-----------------------------------------------------------------------------*/
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long codt;
- unsigned long modt0 = 0;
- unsigned long modt1 = 0;
- unsigned long modt2 = 0;
- unsigned long modt3 = 0;
- unsigned char dimm_num;
- unsigned char dimm_rank;
- unsigned char total_rank = 0;
- unsigned char total_dimm = 0;
- unsigned char dimm_type = 0;
- unsigned char firstSlot = 0;
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CODT, codt);
- codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END);
- codt |= SDRAM_CODT_IO_NMODE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
- dimm_rank = (dimm_rank & 0x0F) + 1;
- dimm_type = SDRAM_DDR2;
- } else {
- dimm_rank = dimm_rank & 0x0F;
- dimm_type = SDRAM_DDR1;
- }
-
- total_rank += dimm_rank;
- total_dimm++;
- if ((dimm_num == 0) && (total_dimm == 1))
- firstSlot = TRUE;
- else
- firstSlot = FALSE;
- }
- }
- if (dimm_type == SDRAM_DDR2) {
- codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
- if ((total_dimm == 1) && (firstSlot == TRUE)) {
- if (total_rank == 1) { /* PUUU */
- codt |= CALC_ODT_R(0);
- modt0 = CALC_ODT_W(0);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* PPUU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
- modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
- if (total_rank == 1) { /* UUPU */
- codt |= CALC_ODT_R(2);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2);
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* UUPP */
- codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
- modt3 = 0x00000000;
- }
- }
- if (total_dimm == 2) {
- if (total_rank == 2) { /* PUPU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
- modt0 = CALC_ODT_RW(2);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0);
- modt3 = 0x00000000;
- }
- if (total_rank == 4) { /* PPPP */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
- CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
- modt3 = 0x00000000;
- }
- }
- } else {
- codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
-
- if (total_dimm == 1) {
- if (total_rank == 1)
- codt |= 0x00800000;
- if (total_rank == 2)
- codt |= 0x02800000;
- }
- if (total_dimm == 2) {
- if (total_rank == 2)
- codt |= 0x08800000;
- if (total_rank == 4)
- codt |= 0x2a800000;
- }
- }
-
- debug("nb of dimm %d\n", total_dimm);
- debug("nb of rank %d\n", total_rank);
- if (total_dimm == 1)
- debug("dimm in slot %d\n", firstSlot);
-
- mtsdram(SDRAM_CODT, codt);
- mtsdram(SDRAM_MODT0, modt0);
- mtsdram(SDRAM_MODT1, modt1);
- mtsdram(SDRAM_MODT2, modt2);
- mtsdram(SDRAM_MODT3, modt3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_initplr.
- *-----------------------------------------------------------------------------*/
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery)
-{
- u32 cas = 0;
- u32 odt = 0;
- u32 ods = 0;
- u32 mr;
- u32 wr;
- u32 emr;
- u32 emr2;
- u32 emr3;
- int dimm_num;
- int total_dimm = 0;
-
- /******************************************************
- ** Assumption: if more than one DIMM, all DIMMs are the same
- ** as already checked in check_memory_type
- ******************************************************/
-
- if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
- mtsdram(SDRAM_INITPLR0, 0x81B80000);
- mtsdram(SDRAM_INITPLR1, 0x81900400);
- mtsdram(SDRAM_INITPLR2, 0x81810000);
- mtsdram(SDRAM_INITPLR3, 0xff800162);
- mtsdram(SDRAM_INITPLR4, 0x81900400);
- mtsdram(SDRAM_INITPLR5, 0x86080000);
- mtsdram(SDRAM_INITPLR6, 0x86080000);
- mtsdram(SDRAM_INITPLR7, 0x81000062);
- } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
- switch (selected_cas) {
- case DDR_CAS_3:
- cas = 3 << 4;
- break;
- case DDR_CAS_4:
- cas = 4 << 4;
- break;
- case DDR_CAS_5:
- cas = 5 << 4;
- break;
- default:
- printf("ERROR: ucode error on selected_cas value %d", selected_cas);
- spd_ddr_init_hang ();
- break;
- }
-
-#if 0
- /*
- * ToDo - Still a problem with the write recovery:
- * On the Corsair CM2X512-5400C4 module, setting write recovery
- * in the INITPLR reg to the value calculated in program_mode()
- * results in not correctly working DDR2 memory (crash after
- * relocation).
- *
- * So for now, set the write recovery to 3. This seems to work
- * on the Corair module too.
- *
- * 2007-03-01, sr
- */
- switch (write_recovery) {
- case 3:
- wr = WRITE_RECOV_3;
- break;
- case 4:
- wr = WRITE_RECOV_4;
- break;
- case 5:
- wr = WRITE_RECOV_5;
- break;
- case 6:
- wr = WRITE_RECOV_6;
- break;
- default:
- printf("ERROR: write recovery not support (%d)", write_recovery);
- spd_ddr_init_hang ();
- break;
- }
-#else
- wr = WRITE_RECOV_3; /* test-only, see description above */
-#endif
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- total_dimm++;
- if (total_dimm == 1) {
- odt = ODT_150_OHM;
- ods = ODS_FULL;
- } else if (total_dimm == 2) {
- odt = ODT_75_OHM;
- ods = ODS_REDUCED;
- } else {
- printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
- spd_ddr_init_hang ();
- }
-
- mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
- emr = CMD_EMR | SELECT_EMR | odt | ods;
- emr2 = CMD_EMR | SELECT_EMR2;
- emr3 = CMD_EMR | SELECT_EMR3;
- /* NOP - Wait 106 MemClk cycles */
- mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
- SDRAM_INITPLR_IMWT_ENCODE(106));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* EMR2 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR3 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* MR w/ DLL reset - 200 cycle wait for DLL reset */
- mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
- SDRAM_INITPLR_IMWT_ENCODE(200));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
- SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
- /* EMR OCD Exit */
- mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- } else {
- printf("ERROR: ucode error as unknown DDR type in program_initplr");
- spd_ddr_init_hang ();
- }
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_MMODE register.
- * the selected_cas is an output parameter, that will be passed
- * by caller to call the above program_initplr( )
- *-----------------------------------------------------------------*/
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_wr_ns;
- unsigned long t_wr_clk;
- unsigned long cas_bit;
- unsigned long cas_index;
- unsigned long sdram_freq;
- unsigned long ddr_check;
- unsigned long mmode;
- unsigned long tcyc_reg;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_2_5_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ns_x_100;
- unsigned long max_2_5_tcyc_ns_x_100;
- unsigned long max_3_0_tcyc_ns_x_100;
- unsigned long max_4_0_tcyc_ns_x_100;
- unsigned long max_5_0_tcyc_ns_x_100;
- unsigned long cycle_time_ns_x_100[3];
- PPC4xx_SYS_INFO board_cfg;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned char cas_4_0_available;
- unsigned char cas_5_0_available;
- unsigned long sdr_ddrpll;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
- debug("sdram_freq=%lu\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_wr_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- cas_4_0_available = TRUE;
- cas_5_0_available = TRUE;
- max_2_0_tcyc_ns_x_100 = 10;
- max_2_5_tcyc_ns_x_100 = 10;
- max_3_0_tcyc_ns_x_100 = 10;
- max_4_0_tcyc_ns_x_100 = 10;
- max_5_0_tcyc_ns_x_100 = 10;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
-
- /* For a particular DIMM, grab the three CAS values it supports */
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- if ((tcyc_reg & 0x0F) == 0x0D) {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- } else {
- printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
- "in slot %d\n", (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- }
- } else {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- }
- debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
- cycle_time_ns_x_100[cas_index]);
- }
-
- /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
- /* supported for a particular DIMM. */
- cas_index = 0;
-
- if (sdram_ddr1) {
- /*
- * DDR devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
- */
- if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_0_available = FALSE;
- }
- } else {
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_5_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
- }
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MMODE, mmode);
- mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
- cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
- debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
- debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
- debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
- *selected_cas = DDR_CAS_2;
- } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
- *selected_cas = DDR_CAS_2_5;
- } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
- } else { /* DDR2 */
- debug("cas_3_0_available=%d\n", cas_3_0_available);
- debug("cas_4_0_available=%d\n", cas_4_0_available);
- debug("cas_5_0_available=%d\n", cas_5_0_available);
- if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
- *selected_cas = DDR_CAS_4;
- } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
- *selected_cas = DDR_CAS_5;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
- printf("cas3=%d cas4=%d cas5=%d\n",
- cas_3_0_available, cas_4_0_available, cas_5_0_available);
- printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
- sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang ();
- }
- }
-
- if (sdram_ddr1 == TRUE)
- mmode |= SDRAM_MMODE_WR_DDR1;
- else {
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
- spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
- if (sdram_freq != ddr_check)
- t_wr_clk++;
-
- switch (t_wr_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
- break;
- case 4:
- mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
- break;
- case 5:
- mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
- break;
- default:
- mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
- break;
- }
- *write_recovery = t_wr_clk;
- }
-
- debug("CAS latency = %d\n", *selected_cas);
- debug("Write recovery = %d\n", *write_recovery);
-
- mtsdram(SDRAM_MMODE, mmode);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_rtr.
- *-----------------------------------------------------------------------------*/
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- PPC4xx_SYS_INFO board_cfg;
- unsigned long max_refresh_rate;
- unsigned long dimm_num;
- unsigned long refresh_rate_type;
- unsigned long refresh_rate;
- unsigned long rint;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- unsigned long val;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Refresh Timing Register, SDRAM_RTR
- *-----------------------------------------------------------------*/
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- max_refresh_rate = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
-
- refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
- refresh_rate_type &= 0x7F;
- switch (refresh_rate_type) {
- case 0:
- refresh_rate = 15625;
- break;
- case 1:
- refresh_rate = 3906;
- break;
- case 2:
- refresh_rate = 7812;
- break;
- case 3:
- refresh_rate = 31250;
- break;
- case 4:
- refresh_rate = 62500;
- break;
- case 5:
- refresh_rate = 125000;
- break;
- default:
- refresh_rate = 0;
- printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
- (unsigned int)dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
-
- max_refresh_rate = max(max_refresh_rate, refresh_rate);
- }
- }
-
- rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
- mfsdram(SDRAM_RTR, val);
- mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
- (SDRAM_RTR_RINT_ENCODE(rint)));
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_TRx registers.
- *-----------------------------------------------------------------*/
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_rp_ns;
- unsigned long t_rcd_ns;
- unsigned long t_rrd_ns;
- unsigned long t_ras_ns;
- unsigned long t_rc_ns;
- unsigned long t_rfc_ns;
- unsigned long t_wpc_ns;
- unsigned long t_wtr_ns;
- unsigned long t_rpc_ns;
- unsigned long t_rp_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rrd_clk;
- unsigned long t_ras_clk;
- unsigned long t_rc_clk;
- unsigned long t_rfc_clk;
- unsigned long t_wpc_clk;
- unsigned long t_wtr_clk;
- unsigned long t_rpc_clk;
- unsigned long sdtr1, sdtr2, sdtr3;
- unsigned long ddr_check;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
-
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_rp_ns = 0;
- t_rrd_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- t_rc_ns = 0;
- t_rfc_ns = 0;
- t_wpc_ns = 0;
- t_wtr_ns = 0;
- t_rpc_ns = 0;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR2)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 1, SDRAM_TR1
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR1, sdtr1);
- sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
- SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
-
- /* default values */
- sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
- sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
-
- /* normal operations */
- sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
- sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
-
- mtsdram(SDRAM_SDTR1, sdtr1);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 2, SDRAM_TR2
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR2, sdtr2);
- sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
- SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
- SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
- SDRAM_SDTR2_RRD_MASK);
-
- /*
- * convert t_rcd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
- if (sdram_freq != ddr_check)
- t_rcd_clk++;
-
- switch (t_rcd_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
- break;
- }
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if (sdram_freq < 200000000) {
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- } else {
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- }
- } else { /* DDR2 */
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
- }
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
- if (sdram_freq != ddr_check)
- t_wpc_clk++;
-
- switch (t_wpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
- if (sdram_freq != ddr_check)
- t_wtr_clk++;
-
- switch (t_wtr_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
- if (sdram_freq != ddr_check)
- t_rpc_clk++;
-
- switch (t_rpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
- break;
- }
- }
-
- /* default value */
- sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
-
- /*
- * convert t_rrd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
- if (sdram_freq != ddr_check)
- t_rrd_clk++;
-
- if (t_rrd_clk == 3)
- sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
- else
- sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
-
- /*
- * convert t_rp from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
- if (sdram_freq != ddr_check)
- t_rp_clk++;
-
- switch (t_rp_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
- break;
- case 6:
- sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
- break;
- }
-
- mtsdram(SDRAM_SDTR2, sdtr2);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 3, SDRAM_TR3
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR3, sdtr3);
- sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
- SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
-
- /*
- * convert t_ras from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
- if (sdram_freq != ddr_check)
- t_ras_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
-
- /*
- * convert t_rc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
- if (sdram_freq != ddr_check)
- t_rc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
-
- /* default xcs value */
- sdtr3 |= SDRAM_SDTR3_XCS;
-
- /*
- * convert t_rfc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
- if (sdram_freq != ddr_check)
- t_rfc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
-
- mtsdram(SDRAM_SDTR3, sdtr3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_bxcf.
- *-----------------------------------------------------------------------------*/
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long num_col_addr;
- unsigned long num_ranks;
- unsigned long num_banks;
- unsigned long mode;
- unsigned long ind_rank;
- unsigned long ind;
- unsigned long ind_bank;
- unsigned long bank_0_populated;
-
- /*------------------------------------------------------------------
- * Set the BxCF regs. First, wipe out the bank config registers.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MB0CF, 0x00000000);
- mtsdram(SDRAM_MB1CF, 0x00000000);
- mtsdram(SDRAM_MB2CF, 0x00000000);
- mtsdram(SDRAM_MB3CF, 0x00000000);
-
- mode = SDRAM_BXCF_M_BE_ENABLE;
-
- bank_0_populated = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) +1;
- else
- num_ranks = num_ranks & 0x0F;
-
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
-
- for (ind_bank = 0; ind_bank < 2; ind_bank++) {
- if (num_banks == 4)
- ind = 0;
- else
- ind = 5 << 8;
- switch (num_col_addr) {
- case 0x08:
- mode |= (SDRAM_BXCF_M_AM_0 + ind);
- break;
- case 0x09:
- mode |= (SDRAM_BXCF_M_AM_1 + ind);
- break;
- case 0x0A:
- mode |= (SDRAM_BXCF_M_AM_2 + ind);
- break;
- case 0x0B:
- mode |= (SDRAM_BXCF_M_AM_3 + ind);
- break;
- case 0x0C:
- mode |= (SDRAM_BXCF_M_AM_4 + ind);
- break;
- default:
- printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", (unsigned int)num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
- bank_0_populated = 1;
-
- for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
- mtsdram(SDRAM_MB0CF +
- ((dimm_num + bank_0_populated + ind_rank) << 2),
- mode);
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * program memory queue.
- *-----------------------------------------------------------------*/
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- phys_size_t rank_base_addr;
- unsigned long rank_reg;
- phys_size_t rank_size_bytes;
- unsigned long rank_size_id;
- unsigned long num_ranks;
- unsigned long baseadd_size;
- unsigned long i;
- unsigned long bank_0_populated = 0;
- phys_size_t total_size = 0;
-
- /*------------------------------------------------------------------
- * Reset the rank_base_address.
- *-----------------------------------------------------------------*/
- rank_reg = SDRAM_R0BAS;
-
- rank_base_addr = 0x00000000;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) + 1;
- else
- num_ranks = num_ranks & 0x0F;
-
- rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
-
- /*------------------------------------------------------------------
- * Set the sizes
- *-----------------------------------------------------------------*/
- baseadd_size = 0;
- switch (rank_size_id) {
- case 0x01:
- baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
- total_size = 1024;
- break;
- case 0x02:
- baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
- total_size = 2048;
- break;
- case 0x04:
- baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
- total_size = 4096;
- break;
- case 0x08:
- baseadd_size |= SDRAM_RXBAS_SDSZ_32;
- total_size = 32;
- break;
- case 0x10:
- baseadd_size |= SDRAM_RXBAS_SDSZ_64;
- total_size = 64;
- break;
- case 0x20:
- baseadd_size |= SDRAM_RXBAS_SDSZ_128;
- total_size = 128;
- break;
- case 0x40:
- baseadd_size |= SDRAM_RXBAS_SDSZ_256;
- total_size = 256;
- break;
- case 0x80:
- baseadd_size |= SDRAM_RXBAS_SDSZ_512;
- total_size = 512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- (unsigned int)rank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- rank_size_bytes = total_size << 20;
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
- bank_0_populated = 1;
-
- for (i = 0; i < num_ranks; i++) {
- mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
- (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
- baseadd_size));
- rank_base_addr += rank_size_bytes;
- }
- }
- }
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Enable high bandwidth access
- * This is currently not used, but with this setup
- * it is possible to use it later on in e.g. the Linux
- * EMAC driver for performance gain.
- */
- mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
-
- /*
- * Set optimal value for Memory Queue HB/LL Configuration registers
- */
- mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
- SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
- SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
- mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
- SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
- SDRAM_CONF1LL_RPLM);
- mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
-#endif
-}
-
-#ifdef CONFIG_DDR_ECC
-/*-----------------------------------------------------------------------------+
- * program_ecc.
- *-----------------------------------------------------------------------------*/
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value)
-{
- unsigned long dimm_num;
- unsigned long ecc;
-
- ecc = 0;
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
- }
- if (ecc == 0)
- return;
-
- do_program_ecc(tlb_word2_i_value);
-}
-#endif
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-/*-----------------------------------------------------------------------------+
- * program_DQS_calibration.
- *-----------------------------------------------------------------------------*/
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long val;
-
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
- mtsdram(SDRAM_RQDC, 0x80000037);
- mtsdram(SDRAM_RDCC, 0x40000000);
- mtsdram(SDRAM_RFDC, 0x000001DF);
-
- test();
-#else
- /*------------------------------------------------------------------
- * Program RDCC register
- * Read sample cycle auto-update enable
- *-----------------------------------------------------------------*/
-
- mfsdram(SDRAM_RDCC, val);
- mtsdram(SDRAM_RDCC,
- (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | SDRAM_RDCC_RSAE_ENABLE);
-
- /*------------------------------------------------------------------
- * Program RQDC register
- * Internal DQS delay mechanism enable
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
-
- /*------------------------------------------------------------------
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- * Set RFOS to 1/4 of memclk cycle (0x3f)
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_RFDC, val);
- mtsdram(SDRAM_RFDC,
- (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
- SDRAM_RFDC_RFFD_MASK))
- | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
- SDRAM_RFDC_RFFD_ENCODE(0)));
-
- DQS_calibration_process();
-#endif
-}
-
-static int short_mem_test(void)
-{
- u32 *membase;
- u32 bxcr_num;
- u32 bxcf;
- int i;
- int j;
- phys_size_t base_addr;
- u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
- int l;
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
-
- /* Banks enabled */
- if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
- /* Bank is enabled */
-
- /*
- * Only run test on accessable memory (below 2GB)
- */
- base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
- if (base_addr >= CONFIG_MAX_MEM_MAPPED)
- continue;
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- membase = (u32 *)(u32)base_addr;
-
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (l=0; l<NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- return 0;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- }
- }
- } /* if bank enabled */
- } /* for bxcf_num */
-
- return 1;
-}
-
-#ifndef HARD_CODED_DQS
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void DQS_calibration_process(void)
-{
- unsigned long rfdc_reg;
- unsigned long rffd;
- unsigned long val;
- long rffd_average;
- long max_start;
- long min_end;
- unsigned long begin_rqfd[MAXRANKS];
- unsigned long begin_rffd[MAXRANKS];
- unsigned long end_rqfd[MAXRANKS];
- unsigned long end_rffd[MAXRANKS];
- char window_found;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- long max_end;
- unsigned char fail_found;
- unsigned char pass_found;
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- u32 rqdc_reg;
- u32 rqfd;
- u32 rqfd_start;
- u32 rqfd_average;
- int loopi = 0;
- char str[] = "Auto calibration -";
- char slash[] = "\\|/-\\|/-";
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
-
- /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
- rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
-
- puts(str);
-
-calibration_loop:
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
-#else /* CONFIG_DDR_RQDC_FIXED */
- /*
- * On Katmai the complete auto-calibration somehow doesn't seem to
- * produce the best results, meaning optimal values for RQFD/RFFD.
- * This was discovered by GDA using a high bandwidth scope,
- * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
- * so now on Katmai "only" RFFD is auto-calibrated.
- */
- mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- max_start = 0;
- min_end = 0;
- begin_rqfd[0] = 0;
- begin_rffd[0] = 0;
- begin_rqfd[1] = 0;
- begin_rffd[1] = 0;
- end_rqfd[0] = 0;
- end_rffd[0] = 0;
- end_rqfd[1] = 0;
- end_rffd[1] = 0;
- window_found = FALSE;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM_DLCR, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rffd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rffd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val >> 2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- } /* for rffd */
-
- /*------------------------------------------------------------------
- * Set the average RFFD value
- *-----------------------------------------------------------------*/
- rffd_average = ((max_start + max_end) >> 1);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
- /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rqfd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rqfd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
-
- rqfd_average = ((max_start + max_end) >> 1);
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- /* try again from with a different RQFD start value */
- rqfd_start++;
- goto calibration_loop;
- }
-
- printf("\nERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang ();
- }
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC,
- (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- blank_string(strlen(str));
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- /*
- * Now complete RDSS configuration as mentioned on page 7 of the AMCC
- * PowerPC440SP/SPe DDR2 application note:
- * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- */
- mfsdram(SDRAM_RTSR, val);
- if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
- mfsdram(SDRAM_RDCC, val);
- if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
- val += 0x40000000;
- mtsdram(SDRAM_RDCC, val);
- }
- }
-
- mfsdram(SDRAM_DLCR, val);
- debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RQDC, val);
- debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RFDC, val);
- debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RDCC, val);
- debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
-}
-#else /* calibration test with hardvalues */
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void test(void)
-{
- unsigned long dimm_num;
- unsigned long ecc_temp;
- unsigned long i, j;
- unsigned long *membase;
- unsigned long bxcf[MAXRANKS];
- unsigned long val;
- char window_found;
- char begin_found[MAXDIMMS];
- char end_found[MAXDIMMS];
- char search_end[MAXDIMMS];
- unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, ecc_temp);
- ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
- mfsdram(SDRAM_MCOPT1, val);
- mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
- SDRAM_MCOPT1_MCHK_NON);
-
- window_found = FALSE;
- begin_found[0] = FALSE;
- end_found[0] = FALSE;
- search_end[0] = FALSE;
- begin_found[1] = FALSE;
- end_found[1] = FALSE;
- search_end[1] = FALSE;
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
-
- /* Banks enabled */
- if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-
- /* Bank is enabled */
- membase =
- (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- break;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- if (j < NUMMEMWORDS)
- break;
- }
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (i < NUMMEMTESTS) {
- if ((end_found[dimm_num] == FALSE) &&
- (search_end[dimm_num] == TRUE)) {
- end_found[dimm_num] = TRUE;
- }
- if ((end_found[0] == TRUE) &&
- (end_found[1] == TRUE))
- break;
- } else {
- if (begin_found[dimm_num] == FALSE) {
- begin_found[dimm_num] = TRUE;
- search_end[dimm_num] = TRUE;
- }
- }
- } else {
- begin_found[dimm_num] = TRUE;
- end_found[dimm_num] = TRUE;
- }
- }
-
- if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
- window_found = TRUE;
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- spd_ddr_init_hang ();
- }
-
- /*------------------------------------------------------------------
- * Restore the ECC variable to what it originally was
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MCOPT1,
- (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
- | ecc_temp);
-}
-#endif /* !HARD_CODED_DQS */
-#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
-
-#else /* CONFIG_SPD_EEPROM */
-
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
- * The configuration is performed using static, compile-
- * time parameters.
- * Configures the PPC405EX(r) and PPC460EX/GT
- *---------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- /*
- * Only run this SDRAM init code once. For NAND booting
- * targets like Kilauea, we call initdram() early from the
- * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
- * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
- * which calls initdram() again. This time the controller
- * mustn't be reconfigured again since we're already running
- * from SDRAM.
- */
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- unsigned long val;
-
-#if defined(CONFIG_440)
- mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
- mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
- mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
- mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
- mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
- mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
- mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
- mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
-#endif
-
- /* Set Memory Bank Configuration Registers */
-
- mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
- mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
- mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
- mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
-
- /* Set Memory Clock Timing Register */
-
- mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
-
- /* Set Refresh Time Register */
-
- mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
-
- /* Set SDRAM Timing Registers */
-
- mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
- mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
- mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
-
- /* Set Mode and Extended Mode Registers */
-
- mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
- mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
-
- /* Set Memory Controller Options 1 Register */
-
- mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
-
- /* Set Manual Initialization Control Registers */
-
- mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
- mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
- mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
- mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
- mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
- mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
- mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
- mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
- mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
- mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
- mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
- mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
- mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
- mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
- mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
- mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
-
- /* Set On-Die Termination Registers */
-
- mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
- mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
- mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
-
- /* Set Write Timing Register */
-
- mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
-
- /*
- * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
- * SDRAM0_MCOPT2[IPTR] = 1
- */
-
- mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
- SDRAM_MCOPT2_IPTR_EXECUTE));
-
- /*
- * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
- * completion of initialization.
- */
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
-
- /* Set Delay Control Registers */
-
- mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
- mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
- mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
-#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
- /*
- * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
- */
-
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
-
-#if defined(CONFIG_440)
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
-#endif
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*------------------------------------------------------------------
- | DQS calibration.
- +-----------------------------------------------------------------*/
- DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#if defined(CONFIG_DDR_ECC)
- do_program_ecc(0);
-#endif /* defined(CONFIG_DDR_ECC) */
-
-#if defined(CONFIG_440)
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
-#endif
-
- ppc4xx_ibm_ddr2_register_dump();
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-
- return (CONFIG_SYS_MBYTES_SDRAM << 20);
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#if defined(CONFIG_440)
-u32 mfdcr_any(u32 dcr)
-{
- u32 val;
-
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- val = mfdcr(SDRAM_R0BAS + 0);
- break;
- case SDRAM_R0BAS + 1:
- val = mfdcr(SDRAM_R0BAS + 1);
- break;
- case SDRAM_R0BAS + 2:
- val = mfdcr(SDRAM_R0BAS + 2);
- break;
- case SDRAM_R0BAS + 3:
- val = mfdcr(SDRAM_R0BAS + 3);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- val = 0; /* just to satisfy the compiler */
- }
-
- return val;
-}
-
-void mtdcr_any(u32 dcr, u32 val)
-{
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- mtdcr(SDRAM_R0BAS + 0, val);
- break;
- case SDRAM_R0BAS + 1:
- mtdcr(SDRAM_R0BAS + 1, val);
- break;
- case SDRAM_R0BAS + 2:
- mtdcr(SDRAM_R0BAS + 2, val);
- break;
- case SDRAM_R0BAS + 3:
- mtdcr(SDRAM_R0BAS + 3, val);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- }
-}
-#endif /* defined(CONFIG_440) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-
-inline void ppc4xx_ibm_ddr2_register_dump(void)
-{
-#if defined(DEBUG)
- printf("\nPPC4xx IBM DDR2 Register Dump:\n");
-
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
-#endif /* (defined(CONFIG_440SP) || ... */
-#if defined(CONFIG_405EX)
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
-#endif /* defined(CONFIG_405EX) */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
- /*
- * OPART is only used as a trigger register.
- *
- * No data is contained in this register, and reading or writing
- * to is can cause bad things to happen (hangs). Just skip it and
- * report "N/A".
- */
- printf("%20s = N/A\n", "SDRAM_OPART");
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
-#endif /* defined(DEBUG) */
-}
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX
- * 440/460: 440SP/440SPe/460EX/460GT/460SX
- *
- * (C) Copyright 2008 Applied Micro Circuits Corporation
- * Adam Graham <agraham@amcc.com>
- *
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#undef DEBUG
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-
-/*
- * Only compile the DDR auto-calibration code for NOR boot and
- * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
- */
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-
-#define MAXBXCF 4
-#define SDRAM_RXBAS_SHIFT_1M 20
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
-#define NUMMEMTESTS 24
-#else
-#define NUMMEMTESTS 8
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
-#define NUMLOOPS 1 /* configure as you deem approporiate */
-#define NUMMEMWORDS 16
-
-#define SDRAM_RDCC_RDSS_VAL(n) SDRAM_RDCC_RDSS_DECODE(ddr_rdss_opt(n))
-
-/* Private Structure Definitions */
-
-struct autocal_regs {
- u32 rffd;
- u32 rqfd;
-};
-
-struct ddrautocal {
- u32 rffd;
- u32 rffd_min;
- u32 rffd_max;
- u32 rffd_size;
- u32 rqfd;
- u32 rqfd_size;
- u32 rdcc;
- u32 flags;
-};
-
-struct sdram_timing {
- u32 wrdtr;
- u32 clktr;
-};
-
-struct sdram_timing_clks {
- u32 wrdtr;
- u32 clktr;
- u32 rdcc;
- u32 flags;
-};
-
-struct autocal_clks {
- struct sdram_timing_clks clocks;
- struct ddrautocal autocal;
-};
-
-/*--------------------------------------------------------------------------+
- * Prototypes
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-static u32 DQS_calibration_methodA(struct ddrautocal *);
-static u32 program_DQS_calibration_methodA(struct ddrautocal *);
-#else
-static u32 DQS_calibration_methodB(struct ddrautocal *);
-static u32 program_DQS_calibration_methodB(struct ddrautocal *);
-#endif
-static int short_mem_test(u32 *);
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void
-spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-#endif /* defined(CONFIG_SPD_EEPROM) */
-
-ulong __ddr_scan_option(ulong default_val)
-{
- return default_val;
-}
-ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
-
-u32 __ddr_rdss_opt(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt")));
-
-
-static u32 *get_membase(int bxcr_num)
-{
- ulong bxcf;
- u32 *membase;
-
-#if defined(SDRAM_R0BAS)
- /* BAS from Memory Queue rank reg. */
- membase =
- (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
- bxcf = 0; /* just to satisfy the compiler */
-#else
- /* BAS from SDRAM_MBxCF mem rank reg. */
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
- membase = (u32 *)((bxcf & 0xfff80000) << 3);
-#endif
-
- return membase;
-}
-
-static inline void ecc_clear_status_reg(void)
-{
- mtsdram(SDRAM_ECCES, 0xffffffff);
-#if defined(SDRAM_R0BAS)
- mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
-#endif
-}
-
-/*
- * Reset and relock memory DLL after SDRAM_CLKTR change
- */
-static inline void relock_memory_DLL(void)
-{
- u32 reg;
-
- mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
-
- do {
- mfsdram(SDRAM_MCSTAT, reg);
- } while (!(reg & SDRAM_MCSTAT_MIC_COMP));
-
- mfsdram(SDRAM_MCOPT2, reg);
- mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
-}
-
-static int ecc_check_status_reg(void)
-{
- u32 ecc_status;
-
- /*
- * Compare suceeded, now check
- * if got ecc error. If got an
- * ecc error, then don't count
- * this as a passing value
- */
- mfsdram(SDRAM_ECCES, ecc_status);
- if (ecc_status != 0x00000000) {
- /* clear on error */
- ecc_clear_status_reg();
- /* ecc check failure */
- return 0;
- }
- ecc_clear_status_reg();
- sync();
-
- return 1;
-}
-
-/* return 1 if passes, 0 if fail */
-static int short_mem_test(u32 *base_address)
-{
- int i, j, l;
- u32 ecc_mode = 0;
-
- ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
- /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
- /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
- /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
- /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
- /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
- /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
- /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
- /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
- /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
- /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
- /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
- /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
- /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
- /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
- /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
- /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
- /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
- };
-
- mfsdram(SDRAM_MCOPT1, ecc_mode);
- if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
- SDRAM_MCOPT1_MCHK_CHK_REP) {
- ecc_clear_status_reg();
- sync();
- ecc_mode = 1;
- } else {
- ecc_mode = 0;
- }
-
- /*
- * Run the short memory test.
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- base_address[j] = test[i][j];
- ppcDcbf((ulong)&(base_address[j]));
- }
- sync();
- iobarrier_rw();
- for (l = 0; l < NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (base_address[j] != test[i][j]) {
- ppcDcbf((u32)&(base_address[j]));
- return 0;
- } else {
- if (ecc_mode) {
- if (!ecc_check_status_reg())
- return 0;
- }
- }
- ppcDcbf((u32)&(base_address[j]));
- } /* for (j = 0; j < NUMMEMWORDS; j++) */
- sync();
- iobarrier_rw();
- } /* for (l=0; l<NUMLOOPS; l++) */
- }
-
- return 1;
-}
-
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodA.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodA(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodA()
- *
- * Autocalibration Method A
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD
- * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1; RQDC.RQFD
- * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD
- * }
- * }
- * }
- */
-static u32 DQS_calibration_methodA(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- u32 passed = 0;
-
- int in_window;
- struct autocal_regs curr_win_min;
- struct autocal_regs curr_win_max;
- struct autocal_regs best_win_min;
- struct autocal_regs best_win_max;
- struct autocal_regs loop_win_min;
- struct autocal_regs loop_win_max;
-
-#ifdef DEBUG
- ulong temp;
-#endif
- ulong rdcc;
-
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
-
- /* start */
- in_window = 0;
-
- memset(&curr_win_min, 0, sizeof(curr_win_min));
- memset(&curr_win_max, 0, sizeof(curr_win_max));
- memset(&best_win_min, 0, sizeof(best_win_min));
- memset(&best_win_max, 0, sizeof(best_win_max));
- memset(&loop_win_min, 0, sizeof(loop_win_min));
- memset(&loop_win_max, 0, sizeof(loop_win_max));
-
- rdcc = 0;
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
- mfsdram(SDRAM_RTSR, temp);
- debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
- mfsdram(SDRAM_FCSR, temp);
- debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
-#endif
-
- putc(' ');
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- curr_win_min.rffd = 0;
- curr_win_max.rffd = 0;
- in_window = 0;
-
- for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC,
- rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass = short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcr_num */
-
- /* If this value passed update RFFD windows */
- if (pass && !in_window) { /* at the start of window */
- in_window = 1;
- curr_win_min.rffd = curr_win_max.rffd = rffd;
- curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
- mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
- } else if (!pass && in_window) { /* at end of window */
- in_window = 0;
- } else if (pass && in_window) { /* within the window */
- curr_win_max.rffd = rffd;
- curr_win_max.rqfd = rqfd;
- }
- /* else if (!pass && !in_window)
- skip - no pass, not currently in a window */
-
- if (in_window) {
- if ((curr_win_max.rffd - curr_win_min.rffd) >
- (best_win_max.rffd - best_win_min.rffd)) {
- best_win_min.rffd = curr_win_min.rffd;
- best_win_max.rffd = curr_win_max.rffd;
-
- best_win_min.rqfd = curr_win_min.rqfd;
- best_win_max.rqfd = curr_win_max.rqfd;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* RFDC.RFFD */
-
- /*
- * save-off the best window results of the RFDC.RFFD
- * for this RQDC.RQFD setting
- */
- /*
- * if (just ended RFDC.RFDC loop pass window) >
- * (prior RFDC.RFFD loop pass window)
- */
- if ((best_win_max.rffd - best_win_min.rffd) >
- (loop_win_max.rffd - loop_win_min.rffd)) {
- loop_win_min.rffd = best_win_min.rffd;
- loop_win_max.rffd = best_win_max.rffd;
- loop_win_min.rqfd = rqfd;
- loop_win_max.rqfd = rqfd;
- debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
- "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
- loop_win_min.rqfd, loop_win_max.rqfd,
- loop_win_min.rffd, loop_win_max.rffd);
- }
- } /* RQDC.RQFD */
-
- putc('\b');
-
- debug("\n");
-
- if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
- (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
- (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
- passed = 0;
- }
-
- /*
- * Need to program RQDC before RFDC.
- */
- debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
- debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
- rqfd_average = loop_win_max.rqfd;
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
- debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
- rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = loop_win_max.rffd - loop_win_min.rffd;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- cal->rffd_min = loop_win_min.rffd;
- cal->rffd_max = loop_win_max.rffd;
- }
-
- return (u32)passed;
-}
-
-#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-#endif
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
-#if defined(CONFIG_DDR_RQDC_START_VAL)
- SDRAM_RQDC_RQDE_ENABLE |
- SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
-#else
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
-#endif
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) |
- SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodB(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodB()
- *
- * Autocalibration Method B
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
- *
- * for (j = 0; j < Entire Feedback Range; j++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * FDBK_Valid_Window[j] = 1;
- * }
- * }
- *
- * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
- *
- * for (i = 0; i < Entire DQS Range; i++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1;
- * }
- * }
- *
- * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
- */
-/*-----------------------------------------------------------------------------+
-| DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 DQS_calibration_methodB(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- ulong rdcc;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- uint passed = 0;
-
- int in_window;
- u32 curr_win_min, curr_win_max;
- u32 best_win_min, best_win_max;
- u32 size = 0;
-
- /*------------------------------------------------------------------
- | Test to determine the best read clock delay tuning bits.
- |
- | Before the DDR controller can be used, the read clock delay needs to
- | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- | This value cannot be hardcoded into the program because it changes
- | depending on the board's setup and environment.
- | To do this, all delay values are tested to see if they
- | work or not. By doing this, you get groups of fails with groups of
- | passing values. The idea is to find the start and end of a passing
- | window and take the center of it to use as the read clock delay.
- |
- | A failure has to be seen first so that when we hit a pass, we know
- | that it is truely the start of the window. If we get passing values
- | to start off with, we don't know if we are at the start of the window
- |
- | The code assumes that a failure will always be found.
- | If a failure is not found, there is no easy way to get the middle
- | of the passing window. I guess we can pretty much pick any value
- | but some values will be better than others. Since the lowest speed
- | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- | from experimentation it is safe to say you will always have a failure
- +-----------------------------------------------------------------*/
-
- debug("\n\n");
-
- in_window = 0;
- rdcc = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) { /* start of passing window */
- in_window = 1;
- curr_win_min = curr_win_max = rffd;
- mfsdram(SDRAM_RDCC, rdcc); /* record this value */
- } else if (!pass && in_window) { /* end passing window */
- in_window = 0;
- } else if (pass && in_window) { /* within the passing window */
- curr_win_max = rffd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* for rffd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
- else
- size = best_win_max - best_win_min;
-
- debug("RFFD Min: 0x%x\n", best_win_min);
- debug("RFFD Max: 0x%x\n", best_win_max);
- rffd_average = ((best_win_min + best_win_max) / 2);
-
- cal->rffd_min = best_win_min;
- cal->rffd_max = best_win_max;
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- rffd = rffd_average;
- in_window = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
-
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) {
- in_window = 1;
- curr_win_min = curr_win_max = rqfd;
- } else if (!pass && in_window) {
- in_window = 0;
- } else if (pass && in_window) {
- curr_win_max = rqfd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- }
- passed = 1;
- }
- } /* for rqfd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
-
- debug("RQFD Min: 0x%x\n", best_win_min);
- debug("RQFD Max: 0x%x\n", best_win_max);
- rqfd_average = ((best_win_min + best_win_max) / 2);
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mfsdram(SDRAM_RFDC, rfdc_reg);
-
- /*
- * Need to program RQDC before RFDC. The value is read above.
- * That is the reason why auto cal not work.
- * See, comments below.
- */
- mtsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RFDC, rfdc_reg);
-
- debug("RQDC: 0x%08X\n", rqdc_reg);
- debug("RFDC: 0x%08X\n", rfdc_reg);
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = size;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- }
-
- return (uint)passed;
-}
-#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*
- * Default table for DDR auto-calibration of all
- * possible WRDTR and CLKTR values.
- * Table format is:
- * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
- *
- * Table is terminated with {-1, -1} value pair.
- *
- * Board vendors can specify their own board specific subset of
- * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
- * pairs via a board defined ddr_scan_option() function.
- */
-struct sdram_timing full_scan_options[] = {
- {0, 0}, {0, 1}, {0, 2}, {0, 3},
- {1, 0}, {1, 1}, {1, 2}, {1, 3},
- {2, 0}, {2, 1}, {2, 2}, {2, 3},
- {3, 0}, {3, 1}, {3, 2}, {3, 3},
- {4, 0}, {4, 1}, {4, 2}, {4, 3},
- {5, 0}, {5, 1}, {5, 2}, {5, 3},
- {6, 0}, {6, 1}, {6, 2}, {6, 3},
- {-1, -1}
-};
-
-/*---------------------------------------------------------------------------+
-| DQS_calibration.
-+----------------------------------------------------------------------------*/
-u32 DQS_autocalibration(void)
-{
- u32 wdtr;
- u32 clkp;
- u32 result = 0;
- u32 best_result = 0;
- u32 best_rdcc;
- struct ddrautocal ddrcal;
- struct autocal_clks tcal;
- ulong rfdc_reg;
- ulong rqdc_reg;
- u32 val;
- int verbose_lvl = 0;
- char *str;
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
- struct sdram_timing *scan_list;
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- int i;
- char tmp[64]; /* long enough for environment variables */
-#endif
-
- memset(&tcal, 0, sizeof(tcal));
-
- ddr_scan_option((ulong)full_scan_options);
-
- scan_list =
- (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
-
- mfsdram(SDRAM_MCOPT1, val);
- if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
- str = "ECC Auto calibration -";
- else
- str = "Auto calibration -";
-
- puts(str);
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- i = getenv_r("autocalib", tmp, sizeof(tmp));
- if (i < 0)
- strcpy(tmp, CONFIG_AUTOCALIB);
-
- if (strcmp(tmp, "final") == 0) {
- /* display the final autocalibration results only */
- verbose_lvl = 1;
- } else if (strcmp(tmp, "loop") == 0) {
- /* display summary autocalibration info per iteration */
- verbose_lvl = 2;
- } else if (strcmp(tmp, "display") == 0) {
- /* display full debug autocalibration window info. */
- verbose_lvl = 3;
- }
-#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
-
- best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
-
- while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
- wdtr = scan_list->wrdtr;
- clkp = scan_list->clktr;
-
- mfsdram(SDRAM_WRDTR, val);
- val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
- mtsdram(SDRAM_WRDTR, (val |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
-
- mtsdram(SDRAM_CLKTR, clkp << 30);
-
- relock_memory_DLL();
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
-#ifdef DEBUG
- debug("\n");
- debug("*** --------------\n");
- mfsdram(SDRAM_WRDTR, val);
- debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
- mfsdram(SDRAM_CLKTR, val);
- debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
-#endif
-
- debug("\n");
- if (verbose_lvl > 2) {
- printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
- printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
- }
-
- memset(&ddrcal, 0, sizeof(ddrcal));
-
- /*
- * DQS calibration.
- */
- /*
- * program_DQS_calibration_method[A|B]() returns 0 if no
- * passing RFDC.[RFFD] window is found or returns the size
- * of the best passing window; in the case of a found passing
- * window, the ddrcal will contain the values of the best
- * window RQDC.[RQFD] and RFDC.[RFFD].
- */
-
- /*
- * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
- * Default is methodB.
- * Defined the autocalibration method in the board specific
- * header file.
- * Please see include/configs/kilauea.h for an example for
- * a board specific implementation.
- */
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
- result = program_DQS_calibration_methodA(&ddrcal);
-#else
- result = program_DQS_calibration_methodB(&ddrcal);
-#endif
-
- sync();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- val = ddrcal.rdcc; /* RDCC from the best passing window */
-
- udelay(100);
-
- if (verbose_lvl > 1) {
- char *tstr;
- switch ((val >> 30)) {
- case 0:
- if (result != 0)
- tstr = "T1";
- else
- tstr = "N/A";
- break;
- case 1:
- tstr = "T2";
- break;
- case 2:
- tstr = "T3";
- break;
- case 3:
- tstr = "T4";
- break;
- default:
- tstr = "unknown";
- break;
- }
- printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
- "max-min(0x%04x)(0x%04x), RDCC: %s\n",
- wdtr, clkp, result, best_result,
- ddrcal.rffd_min, ddrcal.rffd_max, tstr);
- }
-
- /*
- * The DQS calibration "result" is either "0"
- * if no passing window was found, or is the
- * size of the RFFD passing window.
- */
- /*
- * want the lowest Read Sample Cycle Select
- */
- val = SDRAM_RDCC_RDSS_DECODE(val);
- debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
- val, best_rdcc);
-
- if ((result != 0) &&
- (val >= SDRAM_RDCC_RDSS_VAL(SDRAM_RDCC_RDSS_T2))) {
- if (((result == best_result) && (val < best_rdcc)) ||
- ((result > best_result) && (val <= best_rdcc))) {
- tcal.autocal.flags = 1;
- debug("*** (%d)(%d) result passed window "
- "size: 0x%08x, rqfd = 0x%08x, "
- "rffd = 0x%08x, rdcc = 0x%08x\n",
- wdtr, clkp, result, ddrcal.rqfd,
- ddrcal.rffd, ddrcal.rdcc);
-
- /*
- * Save the SDRAM_WRDTR and SDRAM_CLKTR
- * settings for the largest returned
- * RFFD passing window size.
- */
- best_rdcc = val;
- tcal.clocks.wrdtr = wdtr;
- tcal.clocks.clktr = clkp;
- tcal.clocks.rdcc = SDRAM_RDCC_RDSS_ENCODE(val);
- tcal.autocal.rqfd = ddrcal.rqfd;
- tcal.autocal.rffd = ddrcal.rffd;
- best_result = result;
-
- if (verbose_lvl > 2) {
- printf("** (%d)(%d) "
- "best result: 0x%04x\n",
- wdtr, clkp,
- best_result);
- printf("** (%d)(%d) "
- "best WRDTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.wrdtr);
- printf("** (%d)(%d) "
- "best CLKTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.clktr);
- printf("** (%d)(%d) "
- "best RQDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rqfd);
- printf("** (%d)(%d) "
- "best RFDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rffd);
- printf("** (%d)(%d) "
- "best RDCC: 0x%08x\n",
- wdtr, clkp,
- (u32)tcal.clocks.rdcc);
- mfsdram(SDRAM_RTSR, val);
- printf("** (%d)(%d) best "
- "loop RTSR: 0x%08x\n",
- wdtr, clkp, val);
- mfsdram(SDRAM_FCSR, val);
- printf("** (%d)(%d) best "
- "loop FCSR: 0x%08x\n",
- wdtr, clkp, val);
- }
- }
- } /* if ((result != 0) && (val >= (ddr_rdss_opt()))) */
- scan_list++;
- } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
-
- if (tcal.autocal.flags == 1) {
- if (verbose_lvl > 0) {
- printf("*** --------------\n");
- printf("*** best_result window size: %d\n",
- best_result);
- printf("*** best_result WRDTR: 0x%04x\n",
- tcal.clocks.wrdtr);
- printf("*** best_result CLKTR: 0x%04x\n",
- tcal.clocks.clktr);
- printf("*** best_result RQFD: 0x%04x\n",
- tcal.autocal.rqfd);
- printf("*** best_result RFFD: 0x%04x\n",
- tcal.autocal.rffd);
- printf("*** best_result RDCC: 0x%04x\n",
- tcal.clocks.rdcc);
- printf("*** --------------\n");
- printf("\n");
- }
-
- /*
- * if got best passing result window, then lock in the
- * best CLKTR, WRDTR, RQFD, and RFFD values
- */
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val &
- ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
- (tcal.clocks.wrdtr << 25)));
-
- mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
-
- relock_memory_DLL();
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg |
- SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
- rqdc_reg);
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg |
- SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
- rfdc_reg);
- mfsdram(SDRAM_RDCC, val);
- debug("*** SDRAM_RDCC 0x%08x\n", val);
- } else {
- /*
- * no valid windows were found
- */
- printf("DQS memory calibration window can not be determined, "
- "terminating u-boot.\n");
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang();
- }
-
- blank_string(strlen(str));
-
- return 0;
-}
-#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-u32 DQS_autocalibration(void)
-{
- return 0;
-}
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
+++ /dev/null
-/*-----------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of
- * the GNU General Public license version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
- *
- * File Name: 405gp_pci.c
- *
- * Function: Initialization code for the 405GP PCI Configuration regs.
- *
- * Author: Mark Game
- *
- * Change Activity-
- *
- * Date Description of Change BY
- * --------- --------------------- ---
- * 09-Sep-98 Created MCG
- * 02-Nov-98 Removed External arbiter selected message JWB
- * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB
- * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG
- * from (0 to n) to (1 to n).
- * 17-May-99 Port to Walnut JWB
- * 17-Jun-99 Updated for VGA support JWB
- * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB
- * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG
- * target latency timer values are not supported).
- * Should be fixed in pass 2.
- * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB
- * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
- * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
- * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
- * really required after a reset since PMMxMAs are already
- * disabled but is a good practice nonetheless. JWB
- * 12-Jun-01 stefan.roese@esd-electronics.com
- * - PCI host/adapter handling reworked
- * 09-Jul-01 stefan.roese@esd-electronics.com
- * - PCI host now configures from device 0 (not 1) to max_dev,
- * (host configures itself)
- * - On CPCI-405 pci base address and size is generated from
- * SDRAM and FLASH size (CFG regs not used anymore)
- * - Some minor changes for CPCI-405-A (adapter version)
- * 14-Sep-01 stefan.roese@esd-electronics.com
- * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
- * 28-Sep-01 stefan.roese@esd-electronics.com
- * - Changed pci master configuration for linux compatibility
- * (no need for bios_fixup() anymore)
- * 26-Feb-02 stefan.roese@esd-electronics.com
- * - Bug fixed in pci configuration (Andrew May)
- * - Removed pci class code init for CPCI405 board
- * 15-May-02 stefan.roese@esd-electronics.com
- * - New vga device handling
- * 29-May-02 stefan.roese@esd-electronics.com
- * - PCI class code init added (if defined)
- *----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <command.h>
-#include <asm/4xx_pci.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#ifdef CONFIG_PCI
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-
-#if defined(CONFIG_PMC405)
-ushort pmc405_pci_subsys_deviceid(void);
-#endif
-
-/*#define DEBUG*/
-
-/*
- * Board-specific pci initialization
- * Platform code can reimplement pci_pre_init() if needed
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
-#if defined(CONFIG_405EP)
- /*
- * Enable the internal PCI arbiter by default.
- *
- * On 405EP CPUs the internal arbiter can be controlled
- * by the I2C strapping EEPROM. If you want to do so
- * or if you want to disable the arbiter pci_pre_init()
- * must be reimplemented without enabling the arbiter.
- * The arbiter is enabled in this place because of
- * compatibility reasons.
- */
- mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
-#endif /* CONFIG_405EP */
-
- return 1;
-}
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-int __is_pci_host(struct pci_controller *hose)
-{
-#if defined(CONFIG_405GP)
- if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
- return 1;
-#elif defined (CONFIG_405EP)
- if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
- return 1;
-#endif
- return 0;
-}
-int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
-
-/*-----------------------------------------------------------------------------+
- * pci_init. Initializes the 405GP PCI Configuration regs.
- *-----------------------------------------------------------------------------*/
-void pci_405gp_init(struct pci_controller *hose)
-{
- int i, reg_num = 0;
- bd_t *bd = gd->bd;
-
- unsigned short temp_short;
- unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- char *ptmla_str, *ptmms_str;
-#endif
- unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
- unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
-#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
- unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
- unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
- unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
- unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
-#else
- unsigned long pmmla[3] = {0x80000000, 0,0};
- unsigned long pmmma[3] = {0xC0000001, 0,0};
- unsigned long pmmpcila[3] = {0x80000000, 0,0};
- unsigned long pmmpciha[3] = {0x00000000, 0,0};
-#endif
-#ifdef CONFIG_PCI_PNP
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- char *s;
-#endif
-#endif
-
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- ptmla_str = getenv("ptm1la");
- ptmms_str = getenv("ptm1ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
- }
-
- ptmla_str = getenv("ptm2la");
- ptmms_str = getenv("ptm2ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
- }
-#endif
-
- /*
- * Register the hose
- */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- MIN_PCI_PCI_IOADDR,
- MIN_PLB_PCI_IOADDR,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00800000,
- 0xe8800000,
- 0x03800000,
- PCI_REGION_IO);
-
- reg_num = 2;
-
- /* Memory spaces */
- for (i=0; i<2; i++)
- if (ptmms[i] & 1)
- {
- if (!i) hose->pci_fb = hose->regions + reg_num;
-
- pci_set_region(hose->regions + reg_num++,
- ptmpcila[i], ptmla[i],
- ~(ptmms[i] & 0xfffff000) + 1,
- PCI_REGION_MEM |
- PCI_REGION_SYS_MEMORY);
- }
-
- /* PCI memory spaces */
- for (i=0; i<3; i++)
- if (pmmma[i] & 1)
- {
- pci_set_region(hose->regions + reg_num++,
- pmmpcila[i], pmmla[i],
- ~(pmmma[i] & 0xfffff000) + 1,
- PCI_REGION_MEM);
- }
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose,
- PCICFGADR,
- PCICFGDATA);
-
- if (hose->pci_fb)
- pciauto_region_init(hose->pci_fb);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
-
- pci_register_hose(hose);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Master configuration.
- * Map one 512 MB range of PLB/processor addresses to PCI memory space.
- * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
- * Use byte reversed out routines to handle endianess.
- *--------------------------------------------------------------------------*/
- out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
- out32r(PMM0LA, pmmla[0]);
- out32r(PMM0PCILA, pmmpcila[0]);
- out32r(PMM0PCIHA, pmmpciha[0]);
- out32r(PMM0MA, pmmma[0]);
-
- /*--------------------------------------------------------------------------+
- * PMM1 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM1MA, (pmmma[1]&~0x1));
- out32r(PMM1LA, pmmla[1]);
- out32r(PMM1PCILA, pmmpcila[1]);
- out32r(PMM1PCIHA, pmmpciha[1]);
- out32r(PMM1MA, pmmma[1]);
-
- /*--------------------------------------------------------------------------+
- * PMM2 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM2MA, (pmmma[2]&~0x1));
- out32r(PMM2LA, pmmla[2]);
- out32r(PMM2PCILA, pmmpcila[2]);
- out32r(PMM2PCIHA, pmmpciha[2]);
- out32r(PMM2MA, pmmma[2]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM1)
- * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
- *--------------------------------------------------------------------------*/
- out32r(PTM1LA, ptmla[0]); /* insert address */
- out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM2)
- *--------------------------------------------------------------------------*/
- out32r(PTM2LA, ptmla[1]); /* insert address */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
-
- if (ptmms[1] == 0)
- {
- out32r(PTM2MS, 0x00000001); /* set enable bit */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
- out32r(PTM2MS, 0x00000000); /* disable */
- }
- else
- {
- out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */
- }
-
- /*
- * Insert Subsystem Vendor and Device ID
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-#ifdef CONFIG_CPCI405
- if (is_pci_host(hose))
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
- else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
-#else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-#endif
-
- /*
- * Insert Class-code
- */
-#ifdef CONFIG_SYS_PCI_CLASSCODE
- pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
-#endif /* CONFIG_SYS_PCI_CLASSCODE */
-
- /*--------------------------------------------------------------------------+
- * If PCI speed = 66MHz, set 66MHz capable bit.
- *--------------------------------------------------------------------------*/
- if (bd->bi_pci_busfreq >= 66000000) {
- pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
- pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
- }
-
-#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
- /*--------------------------------------------------------------------------+
- * Write the 405GP PCI Configuration regs.
- * Enable 405GP to be a master on the PCI bus (PMM).
- * Enable 405GP to act as a PCI memory target (PTM).
- *--------------------------------------------------------------------------*/
- pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- }
-#endif
-
-#if defined(CONFIG_405EP)
- /*
- * on ppc405ep vendor/device id is not set
- * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
- * are the correct values.
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
- pci_write_config_word(PCIDEVID_405GP,
- PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
-#endif
-
- /*
- * Set HCE bit (Host Configuration Enabled)
- */
- pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
-
-#ifdef CONFIG_PCI_PNP
- /*--------------------------------------------------------------------------+
- * Scan the PCI bus and configure devices found.
- *--------------------------------------------------------------------------*/
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
-#endif /* CONFIG_PCI_PNP */
-
-}
-
-/*
- * drivers/pci/pci.c skips every host bridge but the 405GP since it could
- * be set as an Adapter.
- *
- * I (Andrew May) don't know what we should do here, but I don't want
- * the auto setup of a PCI device disabling what is done pci_405gp_init
- * as has happened before.
- */
-void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
-#ifdef DEBUG
- printf("405gp_setup_bridge\n");
-#endif
-}
-
-/*
- *
- */
-
-void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char int_line = 0xff;
-
- /*
- * Write pci interrupt line register (cpci405 specific)
- */
- switch (PCI_DEV(dev) & 0x03)
- {
- case 0:
- int_line = 27 + 2;
- break;
- case 1:
- int_line = 27 + 3;
- break;
- case 2:
- int_line = 27 + 0;
- break;
- case 3:
- int_line = 27 + 1;
- break;
- }
-
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-}
-
-void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
- unsigned int cmdstat = 0;
-
- pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
-
- /* always enable io space on vga boards */
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
- cmdstat |= PCI_COMMAND_IO;
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
-}
-
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
-
-/*
- *As is these functs get called out of flash Not a horrible
- *thing, but something to keep in mind. (no statics?)
- */
-static struct pci_config_table pci_405gp_config_table[] = {
-/*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
- {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
-#endif
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- { }
-};
-
-static struct pci_controller hose = {
- fixup_irq: pci_405gp_fixup_irq,
- config_table: pci_405gp_config_table,
-};
-
-void pci_init_board(void)
-{
- /*we want the ptrs to RAM not flash (ie don't use init list)*/
- hose.fixup_irq = pci_405gp_fixup_irq;
- hose.config_table = pci_405gp_config_table;
- pci_405gp_init(&hose);
-}
-
-#endif
-
-#endif /* CONFIG_405GP */
-
-/*-----------------------------------------------------------------------------+
- * CONFIG_440
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440)
-
-static struct pci_controller ppc440_hose = {0};
-
-/*
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- * Weak default implementation: "Normal" boards implement the PCI
- * host functionality. This can be overridden for PCI adapter boards.
- */
-int __is_pci_host(struct pci_controller *hose)
-{
- return 1;
-}
-int is_pci_host(struct pci_controller *hose)
- __attribute__((weak, alias("__is_pci_host")));
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX)
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-/*
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- */
-void __pci_target_init(struct pci_controller *hose)
-{
- /*
- * Set up Direct MMIO registers
- */
-
- /*
- * PowerPC440 EP PCI Master configuration.
- * Map one 1Gig range of PLB/processor addresses to PCI memory space.
- * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
- * Use byte reversed out routines to handle endianess.
- * Make this region non-prefetchable.
- */
- /* PMM0 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM0MA, 0x00000000);
- /* PMM0 Local Address */
- out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI Low Address */
- out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI High Address */
- out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
-
- /* PMM1 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM1MA, 0x00000000);
- /* PMM1 Local Address */
- out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI Low Address */
- out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI High Address */
- out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
-
- out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */
- out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */
-
- /*
- * Set up Configuration registers
- */
-
- /* Program the board's subsystem id/vendor id */
- pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CONFIG_SYS_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
-
- /* Configure command register as bus master */
- pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
- /* 240nS PCI clock */
- pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
- /* No error reporting */
- pci_write_config_word(0, PCI_ERREN, 0);
-
- pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-/*
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- *
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
- u32 reg;
-
- /*
- * Set priority for all PLB3 devices to 0.
- * Set PLB3 arbiter to fair mode.
- */
- mfsdr(SD0_AMP1, reg);
- mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB3_ACR);
- mtdcr(PLB3_ACR, reg | 0x80000000);
-
- /*
- * Set priority for all PLB4 devices to 0.
- */
- mfsdr(SD0_AMP0, reg);
- mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB4_ACR) | 0xa0000000;
- mtdcr(PLB4_ACR, reg);
-
- /*
- * Set Nebula PLB4 arbiter to fair mode.
- */
- /* Segment0 */
- reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
- reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
- reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
- reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
- mtdcr(PLB0_ACR, reg);
-
- /* Segment1 */
- reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
- reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
- reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
- reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
- mtdcr(PLB1_ACR, reg);
-
-#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
- hose->fixup_irq = board_pci_fixup_irq;
-#endif
-
- return 1;
-}
-
-#else /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void __pci_target_init(struct pci_controller * hose)
-{
- /*
- * Disable everything
- */
- out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
- out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
-
- /*
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
- * strapping options do not support sizes such as 128/256 MB.
- */
- out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
- out_le32((void *)PCIL0_PIM0LAH, 0);
- out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out_le32((void *)PCIL0_BAR0, 0);
-
- /*
- * Program the board's subsystem id/vendor id
- */
- out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
- out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-
- out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
- PCI_COMMAND_MEMORY);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int __pci_pre_init(struct pci_controller *hose)
-{
- /*
- * This board is always configured as the host & requires the
- * PCI arbiter to be enabled.
- */
- if (!pci_arbiter_enabled()) {
- printf("PCI: PCI Arbiter disabled!\n");
- return 0;
- }
-
- return 1;
-}
-
-#endif /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose)
- __attribute__((weak, alias("__pci_target_init")));
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
-void __pci_master_init(struct pci_controller *hose)
-{
- u16 reg;
-
- /*
- * Write the PowerPC440 EP PCI Configuration regs.
- * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- * Enable PowerPC440 EP to act as a PCI memory target (PTM).
- */
- pci_read_config_word(0, PCI_COMMAND, ®);
- pci_write_config_word(0, PCI_COMMAND, reg |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-void pci_master_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_master_init")));
-#endif /* CONFIG_SYS_PCI_MASTER_INIT */
-
-int pci_440_init (struct pci_controller *hose)
-{
- int reg_num = 0;
-
-#ifndef CONFIG_DISABLE_PISE_TEST
- /*--------------------------------------------------------------------------+
- * The PCI initialization sequence enable bit must be set ... if not abort
- * pci setup since updating the bit requires chip reset.
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long strap;
-
- mfsdr(SDR0_SDSTP1,strap);
- if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
- printf("PCI: SDR0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#elif defined(CONFIG_440GP)
- unsigned long strap;
-
- strap = mfdcr(CPC0_STRP1);
- if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
- printf("PCI: CPC0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#endif
-#endif /* CONFIG_DISABLE_PISE_TEST */
-
- /*--------------------------------------------------------------------------+
- * PCI controller init
- *--------------------------------------------------------------------------*/
- hose->first_busno = 0;
- hose->last_busno = 0;
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00000000,
- PCIL0_IOBASE,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_SYS_PCI_TARGBASE,
- CONFIG_SYS_PCI_MEMBASE,
-#ifdef CONFIG_SYS_PCI_MEMSIZE
- CONFIG_SYS_PCI_MEMSIZE,
-#else
- 0x10000000,
-#endif
- PCI_REGION_MEM );
-
-#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
- defined(CONFIG_PCI_SYS_MEM_SIZE)
- /* System memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
-#endif
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-
- pci_register_hose( hose );
-
- /*--------------------------------------------------------------------------+
- * PCI target init
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
- pci_target_init(hose); /* Let board setup pci target */
-#else
- out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
- out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
-#elif defined(PCIL0_BRDGOPT1)
- out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI master init: default is one 256MB region for PCI memory:
- * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
- pci_master_init(hose); /* Let board setup pci master */
-#else
- out32r( PCIL0_POM0SA, 0 ); /* disable */
- out32r( PCIL0_POM1SA, 0 ); /* disable */
- out32r( PCIL0_POM2SA, 0 ); /* disable */
-#if defined(CONFIG_440SPE)
- out32r( PCIL0_POM0LAL, 0x10000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_POM0LAL, 0x20000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#else
- out32r( PCIL0_POM0LAL, 0x00000000 );
- out32r( PCIL0_POM0LAH, 0x00000003 );
-#endif
- out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
- out32r( PCIL0_POM0PCIAH, 0x00000000 );
- out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
- out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI host configuration -- we don't make any assumptions here ... the
- * _board_must_indicate_ what to do -- there's just too many runtime
- * scenarios in environments like cPCI, PPMC, etc. to make a determination
- * based on hard-coded values or state of arbiter enable.
- *--------------------------------------------------------------------------*/
- if (is_pci_host(hose)) {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
- out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
- return hose->last_busno;
-}
-
-void pci_init_board(void)
-{
- int busno;
-
- busno = pci_440_init (&ppc440_hose);
-#if (defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- !defined(CONFIG_PCI_DISABLE_PCIE)
- pcie_setup_hoses(busno + 1);
-#endif
-}
-
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_405EX)
-void pci_init_board(void)
-{
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- pcie_setup_hoses(0);
-}
-#endif /* CONFIG_405EX */
-
-#endif /* CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2006 - 2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <pci.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
-
-#include <asm/4xx_pcie.h>
-
-enum {
- PTYPE_ENDPOINT = 0x0,
- PTYPE_LEGACY_ENDPOINT = 0x1,
- PTYPE_ROOT_PORT = 0x4,
-
- LNKW_X1 = 0x1,
- LNKW_X4 = 0x4,
- LNKW_X8 = 0x8
-};
-
-static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
-
-/*
- * Per default, all cards are present, so we need to check if the
- * link comes up.
- */
-int __board_pcie_card_present(int port)
-{
- return 1;
-}
-int board_pcie_card_present(int port)
- __attribute__((weak, alias("__board_pcie_card_present")));
-
-/*
- * Some boards have runtime detection of the first and last PCIe
- * slot used, so let's provide weak default functions for the
- * common version.
- */
-int __board_pcie_first(void)
-{
- return 0;
-}
-int board_pcie_first(void)
- __attribute__((weak, alias("__board_pcie_first")));
-
-int __board_pcie_last(void)
-{
- return CONFIG_SYS_PCIE_NR_PORTS - 1;
-}
-int board_pcie_last(void)
- __attribute__((weak, alias("__board_pcie_last")));
-
-void __board_pcie_setup_port(int port, int rootpoint)
-{
- /* noting in this weak default implementation */
-}
-void board_pcie_setup_port(int port, int rootpoint)
- __attribute__((weak, alias("__board_pcie_setup_port")));
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
- int first = board_pcie_first();
- int last = board_pcie_last();
-
- /*
- * Assume we're called after the PCI(X) hose(s) are initialized,
- * which takes bus ID 0... and therefore start numbering PCIe's
- * from the next number.
- */
- bus = busno;
-
- for (i = first; i <= last; i++) {
- /*
- * Some boards (e.g. Katmai) can detects via hardware
- * if a PCIe card is plugged, so let's check this.
- */
- if (!board_pcie_card_present(i))
- continue;
-
- if (is_end_point(i)) {
- board_pcie_setup_port(i, 0);
- ret = ppc4xx_init_pcie_endport(i);
- } else {
- board_pcie_setup_port(i, 1);
- ret = ppc4xx_init_pcie_rootport(i);
- }
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
-
-static int validate_endpoint(struct pci_controller *hose)
-{
- if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
- return (is_end_point(0));
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
- return (is_end_point(1));
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
- return (is_end_point(2));
-#endif
-
- return 0;
-}
-
-static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
-{
- u8 *base = (u8*)hose->cfg_data;
-
- /* use local configuration space for the first bus */
- if (PCI_BUS(devfn) == 0) {
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
-#endif
- }
-
- return base;
-}
-
-static void pcie_dmer_disable(void)
-{
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
-#endif
-}
-
-static void pcie_dmer_enable(void)
-{
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
-#endif
-}
-
-static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 *val) {
-
- u8 *address;
- *val = 0;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * NOTICE: configuration space ranges are currenlty mapped only for
- * the first 16 buses, so such limit must be imposed. In case more
- * buses are required the TLB settings in board/amcc/<board>/init.S
- * need to be altered accordingly (one bus takes 1 MB of memory space).
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- /*
- * Only single device/single function is supported for the primary and
- * secondary buses of the 440SPe host bridge.
- */
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Reading from configuration space of non-existing device can
- * generate transaction errors. For the read duration we suppress
- * assertion of machine check exceptions to avoid those.
- */
- pcie_dmer_disable ();
-
- debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
- switch (len) {
- case 1:
- *val = in_8(hose->cfg_data + offset);
- break;
- case 2:
- *val = in_le16((u16 *)(hose->cfg_data + offset));
- break;
- default:
- *val = in_le32((u32*)(hose->cfg_data + offset));
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 val) {
-
- u8 *address;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * Same constraints as in pcie_read_config().
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Suppress MCK exceptions, similar to pcie_read_config()
- */
- pcie_dmer_disable ();
-
- switch (len) {
- case 1:
- out_8(hose->cfg_data + offset, val);
- break;
- case 2:
- out_le16((u16 *)(hose->cfg_data + offset), val);
- break;
- default:
- out_le32((u32 *)(hose->cfg_data + offset), val);
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 1, &v);
- *val = (u8)v;
- return rv;
-}
-
-int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 2, &v);
- *val = (u16)v;
- return rv;
-}
-
-int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 3, &v);
- *val = (u32)v;
- return rv;
-}
-
-int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,1,val);
-}
-
-int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
-}
-
-int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
-}
-
-#if defined(CONFIG_440SPE)
-static void ppc4xx_setup_utl(u32 port) {
-
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
- break;
-
- case 2:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
- out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066);
-}
-
-static int check_error(void)
-{
- u32 valPE0, valPE1, valPE2;
- int err = 0;
-
- /* SDR0_PEGPLLLCT1 reset */
- if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
- printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
-
- valPE0 = SDR_READ(PESDR0_RCSSET);
- valPE1 = SDR_READ(PESDR1_RCSSET);
- valPE2 = SDR_READ(PESDR2_RCSSET);
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & 0x01000000) ||
- !(valPE1 & 0x01000000) ||
- !(valPE2 & 0x01000000)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & 0x00010000) ||
- !(valPE1 & 0x00010000) ||
- !(valPE2 & 0x00010000)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & 0x00001000) ||
- (valPE1 & 0x00001000) ||
- (valPE2 & 0x00001000)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & 0x10000000) ||
- (valPE1 & 0x10000000) ||
- (valPE2 & 0x10000000)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & 0x00100000) ||
- (valPE1 & 0x00100000) ||
- (valPE2 & 0x00100000)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET shutdown */
- if ((valPE0 & 0x00000100) ||
- (valPE1 & 0x00000100) ||
- (valPE2 & 0x00000100)) {
- printf("PCIE: SDR0_PExRCSSET shutdown error\n");
- err = -1;
- }
- return err;
-}
-
-/*
- * Initialize PCI Express core
- */
-int ppc4xx_init_pcie(void)
-{
- int time_out = 20;
-
- /* Set PLL clock receiver to LVPECL */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
- if (check_error()) {
- printf("ERROR: failed to set PCIe reference clock receiver --"
- "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
-
- return -1;
- }
-
- /* Did resistance calibration work? */
- if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
- printf("ERROR: PCIe resistance calibration failed --"
- "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
-
- return -1;
- }
- /* De-assert reset of PCIe PLL, wait for lock */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
- udelay(300); /* 300 uS is maximum time lock should take */
-
- while (time_out) {
- if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
- time_out--;
- udelay(20); /* Wait 20 uS more if needed */
- } else
- break;
- }
- if (!time_out) {
- printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
- "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
-
- return -1;
- }
- return 0;
-}
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-static void ppc4xx_setup_utl(u32 port)
-{
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
- + 0x1000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
- out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
- out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
-}
-
-/*
- * TODO: double check PCI express SDR based on the latest user manual
- * Some registers specified here no longer exist.. has to be
- * updated based on the final EAS spec.
- */
-static int check_error(void)
-{
- u32 valPE0, valPE1;
- int err = 0;
-
- valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
- valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- return err;
-}
-
-/*
- * Initialize PCI Express core as described in User Manual
- * TODO: double check PE SDR PLL Register with the updated user manual.
- */
-int ppc4xx_init_pcie(void)
-{
- if (check_error())
- return -1;
-
- return 0;
-}
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX)
-static void ppc4xx_setup_utl(u32 port)
-{
- u32 utl_base;
-
- /*
- * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
-
- break;
- }
- utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
- out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
- out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
-
- out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
- out_be32((u32 *)(utl_base + PEUTL_RCSTA),
- in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
-}
-
-int ppc4xx_init_pcie(void)
-{
- /*
- * Nothing to do on 405EX
- */
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-/*
- * Board-specific pcie initialization
- * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
- */
-
-/*
- * Initialize various parts of the PCI Express core for our port:
- *
- * - Set as a root port and enable max width
- * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
- * - Set up UTL configuration.
- * - Increase SERDES drive strength to levels suggested by AMCC.
- * - De-assert RSTPYN, RSTDL and RSTGU.
- *
- * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
- * with default setting 0x11310000. The register has new fields,
- * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
- * hang.
- */
-#if defined(CONFIG_440SPE)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val = 1 << 24;
- u32 utlset1;
-
- if (rootport) {
- val = PTYPE_ROOT_PORT << 20;
- utlset1 = 0x21222222;
- } else {
- val = PTYPE_LEGACY_ENDPOINT << 20;
- utlset1 = 0x20222222;
- }
-
- if (port == 0)
- val |= LNKW_X8 << 12;
- else
- val |= LNKW_X4 << 12;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- if (!ppc440spe_revB())
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
- SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
- if (port == 0) {
- SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(1 << 24 | 1 << 16)) | 1 << 12);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
- u32 utlset1;
-
- if (rootport)
- val = PTYPE_ROOT_PORT << 20;
- else
- val = PTYPE_LEGACY_ENDPOINT << 20;
-
- if (port == 0) {
- val |= LNKW_X1 << 12;
- utlset1 = 0x20000000;
- } else {
- val |= LNKW_X4 << 12;
- utlset1 = 0x20101101;
- }
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
-
- switch (port) {
- case 0:
- SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR0_L0DRV, 0x00000130);
- SDR_WRITE(PESDR0_L0CLK, 0x00000006);
-
- SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
- break;
-
- case 1:
- SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L0DRV, 0x00000130);
- SDR_WRITE(PESDR1_L1DRV, 0x00000130);
- SDR_WRITE(PESDR1_L2DRV, 0x00000130);
- SDR_WRITE(PESDR1_L3DRV, 0x00000130);
- SDR_WRITE(PESDR1_L0CLK, 0x00000006);
- SDR_WRITE(PESDR1_L1CLK, 0x00000006);
- SDR_WRITE(PESDR1_L2CLK, 0x00000006);
- SDR_WRITE(PESDR1_L3CLK, 0x00000006);
-
- SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
- (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
-
- /* Poll for PHY reset */
- switch (port) {
- case 0:
- while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
- udelay(10);
- break;
- case 1:
- while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
- udelay(10);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
- PESDRx_RCSSET_RSTPYN);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_405EX)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
-
- if (rootport)
- val = 0x00401000;
- else
- val = 0x00101000;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
- SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
- SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
-
- /* Assert the PE0_PHY reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
- udelay(1000);
-
- /* deassert the PE0_hotreset */
- if (is_end_point(port))
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
- else
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
-
- /* poll for phy !reset */
- while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
- ;
-
- /* deassert the PE0_gpl_utl_reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
-
- if (port == 0)
- mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
- else
- mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
-
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-int ppc4xx_init_pcie_port_hw(int port, int rootport)
-__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
-
-/*
- * We map PCI Express configuration access into the 512MB regions
- *
- * NOTICE: revB is very strict about PLB real addressess and ranges to
- * be mapped for config space; it seems to only work with d_nnnn_nnnn
- * range (hangs the core upon config transaction attempts when set
- * otherwise) while revA uses c_nnnn_nnnn.
- *
- * For 440SPe revA:
- * PCIE0: 0xc_4000_0000
- * PCIE1: 0xc_8000_0000
- * PCIE2: 0xc_c000_0000
- *
- * For 440SPe revB:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- * PCIE2: 0xd_4000_0000
- *
- * For 405EX:
- * PCIE0: 0xa000_0000
- * PCIE1: 0xc000_0000
- *
- * For 460EX/GT:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- */
-static inline u64 ppc4xx_get_cfgaddr(int port)
-{
-#if defined(CONFIG_405EX)
- if (port == 0)
- return (u64)CONFIG_SYS_PCIE0_CFGBASE;
- else
- return (u64)CONFIG_SYS_PCIE1_CFGBASE;
-#endif
-#if defined(CONFIG_440SPE)
- if (ppc440spe_revB()) {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000d00000000ULL;
- case 1:
- return 0x0000000d20000000ULL;
- case 2:
- return 0x0000000d40000000ULL;
- }
- } else {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000c40000000ULL;
- case 1:
- return 0x0000000c80000000ULL;
- case 2:
- return 0x0000000cc0000000ULL;
- }
- }
-#endif
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- if (port == 0)
- return 0x0000000d00000000ULL;
- else
- return 0x0000000d20000000ULL;
-#endif
-}
-
-/*
- * 4xx boards as endpoint and root point setup
- * and
- * testing inbound and out bound windows
- *
- * 4xx boards can be plugged into another 4xx boards or you can get PCI-E
- * cable which can be used to setup loop back from one port to another port.
- * Please rememeber that unless there is a endpoint plugged in to root port it
- * will not initialize. It is the same in case of endpoint , unless there is
- * root port attached it will not initialize.
- *
- * In this release of software all the PCI-E ports are configured as either
- * endpoint or rootpoint.In future we will have support for selective ports
- * setup as endpoint and root point in single board.
- *
- * Once your board came up as root point , you can verify by reading
- * /proc/bus/pci/devices. Where you can see the configuration registers
- * of endpoint device attached to the port.
- *
- * Enpoint cofiguration can be verified by connecting 4xx board to any
- * host or another 4xx board. Then try to scan the device. In case of
- * linux use "lspci" or appripriate os command.
- *
- * How do I verify the inbound and out bound windows ? (4xx to 4xx)
- * in this configuration inbound and outbound windows are setup to access
- * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
- * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
- * This is waere your POM(PLB out bound memory window) mapped. then
- * read the data from other 4xx board's u-boot prompt at address
- * 0x9000 0000(SRAM). Data should match.
- * In case of inbound , write data to u-boot command prompt at 0xb000 0000
- * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
- * data at 0x9000 0000(SRAM).Data should match.
- */
-int ppc4xx_init_pcie_port(int port, int rootport)
-{
- static int core_init;
- volatile u32 val = 0;
- int attempts;
- u64 addr;
- u32 low, high;
-
- if (!core_init) {
- if (ppc4xx_init_pcie())
- return -1;
- ++core_init;
- }
-
- /*
- * Initialize various parts of the PCI Express core for our port
- */
- ppc4xx_init_pcie_port_hw(port, rootport);
-
- /*
- * Notice: the following delay has critical impact on device
- * initialization - if too short (<50ms) the link doesn't get up.
- */
- mdelay(100);
-
- val = SDR_READ(SDRN_PESDR_RCSSTS(port));
- if (val & (1 << 20)) {
- printf("PCIE%d: PGRST failed %08x\n", port, val);
- return -1;
- }
-
- /*
- * Verify link is up
- */
- val = SDR_READ(SDRN_PESDR_LOOP(port));
- if (!(val & 0x00001000)) {
- printf("PCIE%d: link is not up.\n", port);
- return -ENODEV;
- }
-
- /*
- * Setup UTL registers - but only on revA!
- * We use default settings for revB chip.
- */
- if (!ppc440spe_revB())
- ppc4xx_setup_utl(port);
-
- /*
- * We map PCI Express configuration access into the 512MB regions
- */
- addr = ppc4xx_get_cfgaddr(port);
- low = U64_TO_U32_LOW(addr);
- high = U64_TO_U32_HIGH(addr);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
- break;
- case 1:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
- break;
-#endif
- }
-
- /*
- * Check for VC0 active and assert RDY.
- */
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
- if (!(attempts--)) {
- printf("PCIE%d: VC0 not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
- mdelay(100);
-
- return 0;
-}
-
-int ppc4xx_init_pcie_rootport(int port)
-{
- return ppc4xx_init_pcie_port(port, 1);
-}
-
-int ppc4xx_init_pcie_endport(int port)
-{
- return ppc4xx_init_pcie_port(port, 0);
-}
-
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- volatile void *rmbase = NULL;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set bus numbers on our root port
- */
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
- in_le32(mbase + PECFG_POM0LAL));
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
- break;
-#endif
- }
-
- /* Set up 4GB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
- out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAL, 0);
- out_le32(mbase + PECFG_PIM0LAH, 0);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
- /* Set Device and Vendor Id */
- out_le16(mbase + 0x200, 0xaaa0 + port);
- out_le16(mbase + 0x202, 0xbed0 + port);
-
- /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
- out_le32(mbase + 0x208, 0x06040001);
-
- printf("PCIE%d: successfully set as root-complex\n", port);
-}
-
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- int attempts = 0;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if defined(CONFIG_SYS_PCIE2_CFGBASE)
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
- out_le32(mbase + PECFG_POM0LAL, 0x00001000);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#endif
- }
-
- /* Set up 64MB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
- out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
-
- /* Setup BAR0 */
- out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
-
- /* Disable BAR1 & BAR2 */
- out_le32(mbase + PECFG_BAR1MPA, 0);
- out_le32(mbase + PECFG_BAR2HMPA, 0);
- out_le32(mbase + PECFG_BAR2LMPA, 0);
-
- out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
- out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
-
- /* Set Class Code to Processor/PPC */
- out_le32(mbase + 0x208, 0x0b200001);
-
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
- if (!(attempts--)) {
- printf("PCIE%d: BME not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
-
- printf("PCIE%d: successfully set as endpoint\n", port);
-
- return 0;
-}
-#endif /* CONFIG_440SPE && CONFIG_PCI */
+++ /dev/null
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-#include <ppc4xx.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-#include <malloc.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_440)
-
-#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
-#else
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
-#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_440GP)
-#define CR0_MASK 0x3fff0000
-#define CR0_EXTCLK_ENA 0x00600000
-#define CR0_UDIV_POS 16
-#define UDIV_SUBTRACT 1
-#define UART0_SDR CPC0_CR0
-#define MFREG(a, d) d = mfdcr(a)
-#define MTREG(a, d) mtdcr(a, d)
-#else /* #if defined(CONFIG_440GP) */
-/* all other 440 PPC's access clock divider via sdr register */
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_SDR SDR0_UART2
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART3_SDR SDR0_UART3
-#endif
-#define MFREG(a, d) mfsdr(a, d)
-#define MTREG(a, d) mtsdr(a, d)
-#endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define UCR0_MASK 0x0000007f
-#define UCR1_MASK 0x00007f00
-#define UCR0_UDIV_POS 0
-#define UCR1_UDIV_POS 8
-#define UDIV_MAX 127
-#elif defined(CONFIG_405EX)
-#define UART0_BASE 0xef600200
-#define UART1_BASE 0xef600300
-#define CR0_MASK 0x000000ff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#else /* CONFIG_405GP || CONFIG_405CR */
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define CR0_MASK 0x00001fff
-#define CR0_EXTCLK_ENA 0x000000c0
-#define CR0_UDIV_POS 1
-#define UDIV_MAX 32
-#endif
-
-/* using serial port 0 or 1 as U-Boot console ? */
-#if defined(CONFIG_UART1_CONSOLE)
-#define ACTING_UART0_BASE UART1_BASE
-#define ACTING_UART1_BASE UART0_BASE
-#else
-#define ACTING_UART0_BASE UART0_BASE
-#define ACTING_UART1_BASE UART1_BASE
-#endif
-
-#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-#error "External serial clock not supported on AMCC PPC405EP!"
-#endif
-
-#define UART_RBR 0x00
-#define UART_THR 0x00
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRDataReady1 0x01
-#define asyncLSROverrunError1 0x02
-#define asyncLSRParityError1 0x04
-#define asyncLSRFramingError1 0x08
-#define asyncLSRBreakInterrupt1 0x10
-#define asyncLSRTxHoldEmpty1 0x20
-#define asyncLSRTxShiftEmpty1 0x40
-#define asyncLSRRxFifoError1 0x80
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-/*-----------------------------------------------------------------------------+
- | Fifo
- +-----------------------------------------------------------------------------*/
-typedef struct {
- char *rx_buffer;
- ulong rx_put;
- ulong rx_get;
-} serial_buffer_t;
-
-volatile static serial_buffer_t buf_info;
-#endif
-
-static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
-{
- PPC4xx_SYS_INFO sys_info;
- u8 val;
-
- get_sys_info(&sys_info);
-
- /* Correct UART frequency in bd-info struct now that
- * the UART divisor is available
- */
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
-#else
- gd->uart_clk = sys_info.freqUART / udiv;
-#endif
-
- out_8((u8 *)base + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)base + UART_DLL, bdiv); /* set baudrate divisor */
- out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
- out_8((u8 *)base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out_8((u8 *)base + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)base + UART_LSR); /* clear line status */
- val = in_8((u8 *)base + UART_RBR); /* read receive buffer */
- out_8((u8 *)base + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)base + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
- !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
-
- get_sys_info(&sysinfo);
-
- udiv = 32; /* Assume lowest possible serial clk */
- div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
- umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
- diff = 32; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (32) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 32; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- *pbdiv = div / udiv;
-}
-
-#elif defined(CONFIG_405EZ)
-
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
- unsigned long plloutb;
- unsigned long cpr_pllc;
- u32 reg;
-
- /* check the pll feedback source */
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- get_sys_info(&sysinfo);
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
- sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
- udiv = 256; /* Assume lowest possible serial clk */
- div = plloutb / (16 * baudrate); /* total divisor */
- umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
- diff = 256; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (256) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 256; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- mfcpr(CPC0_PERD0, reg);
- reg &= ~0x0000ffff;
- reg |= ((udiv - 0) << 8) | (udiv - 0);
- mtcpr(CPC0_PERD0, reg);
- *pbdiv = div / udiv;
-}
-#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#if defined(CONFIG_440)
-int serial_init_dev(unsigned long base)
-{
- unsigned long reg;
- unsigned long udiv;
- unsigned short bdiv;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- unsigned long tmp;
-#endif
-
- MFREG(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- /* For 440, the cpu clock is on divider chain A, UART on divider
- * chain B ... so cpu clock is irrelevant. Get the "optimized"
- * values that are subject to the 1/2 opb clock constraint
- */
- serial_divs (gd->baudrate, &udiv, &bdiv);
-#endif
-
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- MTREG(UART0_SDR, reg);
-#if defined(UART1_SDR)
- MTREG(UART1_SDR, reg);
-#endif
-#if defined(UART2_SDR)
- MTREG(UART2_SDR, reg);
-#endif
-#if defined(UART3_SDR)
- MTREG(UART3_SDR, reg);
-#endif
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#else /* !defined(CONFIG_440) */
-
-int serial_init_dev (unsigned long base)
-{
- unsigned long reg;
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CONFIG_405EX
- clk = tmp = 0;
- mfsdr(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- serial_divs(gd->baudrate, &udiv, &bdiv);
-#endif
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- mtsdr(UART0_SDR, reg);
-
-#if defined(UART1_SDR)
- mtsdr(UART1_SDR, reg);
-#endif
-
-#elif defined(CONFIG_405EZ)
- serial_divs(gd->baudrate, &udiv, &bdiv);
- clk = tmp = reg = 0;
-#else
-#ifdef CONFIG_405EP
- reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
- clk = gd->cpu_clk;
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
- reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
- reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_UCR, reg);
-#else /* CONFIG_405EP */
- reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
- udiv = 1;
- reg |= CR0_EXTCLK_ENA;
-#else
- clk = gd->cpu_clk;
-#ifdef CONFIG_SYS_405_UART_ERRATA_59
- udiv = 31; /* Errata 59: stuck at 31 */
-#else
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
-#endif
-#endif
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_CR0, reg);
-#endif /* CONFIG_405EP */
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* CONFIG_405EX */
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#endif /* if defined(CONFIG_440) */
-
-void serial_setbrg_dev(unsigned long base)
-{
- serial_init_dev(base);
-}
-
-void serial_putc_dev(unsigned long base, const char c)
-{
- int i;
-
- if (c == '\n')
- serial_putc_dev(base, '\r');
-
- /* check THRE bit, wait for transmiter available */
- for (i = 1; i < 3500; i++) {
- if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
- break;
- udelay (100);
- }
-
- out_8((u8 *)base + UART_THR, c); /* put character out */
-}
-
-void serial_puts_dev (unsigned long base, const char *s)
-{
- while (*s)
- serial_putc_dev (base, *s++);
-}
-
-int serial_getc_dev (unsigned long base)
-{
- unsigned char status = 0;
-
- while (1) {
-#if defined(CONFIG_HW_WATCHDOG)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
-#endif /* CONFIG_HW_WATCHDOG */
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)base));
-}
-
-int serial_tstc_dev (unsigned long base)
-{
- unsigned char status;
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- return (1);
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-
-void serial_isr (void *arg)
-{
- int space;
- int c;
- const int rx_get = buf_info.rx_get;
- int rx_put = buf_info.rx_put;
-
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- while (serial_tstc_dev (ACTING_UART0_BASE)) {
- c = serial_getc_dev (ACTING_UART0_BASE);
- if (space) {
- buf_info.rx_buffer[rx_put++] = c;
- space--;
- }
- if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_put = 0;
- if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
- /* Stop flow by setting RTS inactive */
- out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
- (0xFF ^ 0x02));
- }
- }
- buf_info.rx_put = rx_put;
-}
-
-void serial_buffered_init (void)
-{
- serial_puts ("Switching to interrupt driven serial input mode.\n");
- buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
- buf_info.rx_put = 0;
- buf_info.rx_get = 0;
-
- if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
- serial_puts ("Check CTS signal present on serial port: OK.\n");
- else
- serial_puts ("WARNING: CTS signal not present on serial port.\n");
-
- irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
- serial_isr /*interrupt_handler_t *handler */ ,
- (void *) &buf_info /*void *arg */ );
-
- /* Enable "RX Data Available" Interrupt on UART */
- out_8(ACTING_UART0_BASE + UART_IER, 0x01);
- /* Set DTR active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
- out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
-}
-
-void serial_buffered_putc (const char c)
-{
- /* Wait for CTS */
-#if defined(CONFIG_HW_WATCHDOG)
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
- WATCHDOG_RESET ();
-#else
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
-#endif
- serial_putc (c);
-}
-
-void serial_buffered_puts (const char *s)
-{
- serial_puts (s);
-}
-
-int serial_buffered_getc (void)
-{
- int space;
- int c;
- int rx_get = buf_info.rx_get;
- int rx_put;
-
-#if defined(CONFIG_HW_WATCHDOG)
- while (rx_get == buf_info.rx_put)
- WATCHDOG_RESET ();
-#else
- while (rx_get == buf_info.rx_put);
-#endif
- c = buf_info.rx_buffer[rx_get++];
- if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_get = 0;
- buf_info.rx_get = rx_get;
-
- rx_put = buf_info.rx_put;
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- }
-
- return c;
-}
-
-int serial_buffered_tstc (void)
-{
- return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
-}
-
-#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-
-#if defined(CONFIG_CMD_KGDB)
-/*
- AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
- number 0 or number 1
- - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
- configuration has been already done
- - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
- configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
-*/
-#if (CONFIG_KGDB_SER_INDEX & 2)
-void kgdb_serial_init (void)
-{
- u8 val;
- u16 br_reg;
-
- get_clocks ();
- br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
- 5) / 10;
- /*
- * Init onboard 16550 UART
- */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
- out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR); /* clear line status */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
- out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-void putDebugChar (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- out_8((u8 *)ACTING_UART1_BASE + UART_THR, c); /* put character out */
-
- /* check THRE bit, wait for transfer done */
- while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
-}
-
-void putDebugStr (const char *s)
-{
- while (*s)
- serial_putc (*s++);
-}
-
-int getDebugChar (void)
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & (asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-
-#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
-
-void kgdb_serial_init (void)
-{
- serial_printf ("[on serial] ");
-}
-
-void putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int getDebugChar (void)
-{
- return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif
-
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial0_init(void)
-{
- return (serial_init_dev(UART0_BASE));
-}
-
-int serial1_init(void)
-{
- return (serial_init_dev(UART1_BASE));
-}
-
-void serial0_setbrg (void)
-{
- serial_setbrg_dev(UART0_BASE);
-}
-
-void serial1_setbrg (void)
-{
- serial_setbrg_dev(UART1_BASE);
-}
-
-void serial0_putc(const char c)
-{
- serial_putc_dev(UART0_BASE,c);
-}
-
-void serial1_putc(const char c)
-{
- serial_putc_dev(UART1_BASE, c);
-}
-
-void serial0_puts(const char *s)
-{
- serial_puts_dev(UART0_BASE, s);
-}
-
-void serial1_puts(const char *s)
-{
- serial_puts_dev(UART1_BASE, s);
-}
-
-int serial0_getc(void)
-{
- return(serial_getc_dev(UART0_BASE));
-}
-
-int serial1_getc(void)
-{
- return(serial_getc_dev(UART1_BASE));
-}
-
-int serial0_tstc(void)
-{
- return (serial_tstc_dev(UART0_BASE));
-}
-
-int serial1_tstc(void)
-{
- return (serial_tstc_dev(UART1_BASE));
-}
-
-struct serial_device serial0_device =
-{
- "serial0",
- "UART0",
- serial0_init,
- serial0_setbrg,
- serial0_getc,
- serial0_tstc,
- serial0_putc,
- serial0_puts,
-};
-
-struct serial_device serial1_device =
-{
- "serial1",
- "UART1",
- serial1_init,
- serial1_setbrg,
- serial1_getc,
- serial1_tstc,
- serial1_putc,
- serial1_puts,
-};
-#else
-/*
- * Wrapper functions
- */
-int serial_init(void)
-{
- return serial_init_dev(ACTING_UART0_BASE);
-}
-
-void serial_setbrg(void)
-{
- serial_setbrg_dev(ACTING_UART0_BASE);
-}
-
-void serial_putc(const char c)
-{
- serial_putc_dev(ACTING_UART0_BASE, c);
-}
-
-void serial_puts(const char *s)
-{
- serial_puts_dev(ACTING_UART0_BASE, s);
-}
-
-int serial_getc(void)
-{
- return serial_getc_dev(ACTING_UART0_BASE);
-}
-
-int serial_tstc(void)
-{
- return serial_tstc_dev(ACTING_UART0_BASE);
-}
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* CONFIG_405GP || CONFIG_405CR */
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START := resetvec.o
-START += start.o
-
-SOBJS := cache.o
-SOBJS += dcr.o
-SOBJS += kgdb.o
-
-COBJS := 40x_spd_sdram.o
-
-COBJS += 44x_spd_ddr.o
-COBJS += 44x_spd_ddr2.o
-ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
-COBJS += 4xx_ibm_ddr2_autocalib.o
-endif
-COBJS += 4xx_pci.o
-COBJS += 4xx_pcie.o
-COBJS += bedbug_405.o
-ifdef CONFIG_CMD_CHIP_CONFIG
-COBJS += cmd_chip_config.o
-endif
-COBJS += commproc.o
-COBJS += cpu.o
-COBJS += cpu_init.o
-COBJS += denali_data_eye.o
-COBJS += denali_spd_ddr2.o
-COBJS += ecc.o
-COBJS += fdt.o
-COBJS += interrupts.o
-COBJS += iop480_uart.o
-ifdef CONFIG_CMD_REGINFO
-COBJS += reginfo.o
-endif
-COBJS += sdram.o
-COBJS += speed.o
-COBJS += tlb.o
-COBJS += traps.o
-COBJS += usb.o
-COBJS += usb_ohci.o
-COBJS += usbdev.o
-ifndef CONFIG_XILINX_440
-COBJS += 4xx_uart.o
-COBJS += gpio.o
-COBJS += miiphy.o
-COBJS += uic.o
-else
-COBJS += xilinx_irq.o
-endif
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * Bedbug Functions specific to the PPC405 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/type.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
-
-#define MAX_BREAK_POINTS 4
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug405_init __P ((void));
-void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
-void bedbug405_break_isr __P ((struct pt_regs *));
-int bedbug405_find_empty __P ((void));
-int bedbug405_set __P ((int, unsigned long));
-int bedbug405_clear __P ((int));
-\f
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug405_init (void)
-{
- int i;
-
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug405_do_break;
- bug_ctx.break_isr = bedbug405_break_isr;
- bug_ctx.find_empty = bedbug405_find_empty;
- bug_ctx.set = bedbug405_set;
- bug_ctx.clear = bedbug405_clear;
-
- for (i = 1; i <= MAX_BREAK_POINTS; ++i)
- (*bug_ctx.clear) (i);
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-\f
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 405. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
-
- /* -------------------------------------------------- */
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if (strcmp (argv[1], "off") == 0) {
- if (bug_ctx.hw_debug_enabled == 0) {
- printf ("No breakpoints enabled\n");
- return;
- }
-
- which_bp = simple_strtoul (argv[2], NULL, 10);
-
- if (bug_ctx.clear)
- (*bug_ctx.clear) (which_bp);
-
- printf ("Breakpoint %d removed\n", which_bp);
- return;
- }
-
- /* Show a list of breakpoints */
-
- if (strcmp (argv[1], "show") == 0) {
- for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {
-
- switch (which_bp) {
- case 1:
- addr = GET_IAC1 ();
- break;
- case 2:
- addr = GET_IAC2 ();
- break;
- case 3:
- addr = GET_IAC3 ();
- break;
- case 4:
- addr = GET_IAC4 ();
- break;
- }
-
- printf ("Breakpoint [%d]: ", which_bp);
- if (addr == 0)
- printf ("NOT SET\n");
- else
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
- F_RADHEX);
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if (!isdigit (argv[1][0])) {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;
-
- if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
- printf ("Breakpoint [%d]: ", which_bp);
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
- }
-
- return;
-} /* bedbug405_do_break */
-\f
-
-
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug405_break_isr (struct pt_regs *regs)
-{
- unsigned long dbsr_val; /* Value of the DBSR */
- unsigned long addr = 0; /* Address stopped at */
-
- /* -------------------------------------------------- */
-
- dbsr_val = GET_DBSR ();
-
- if (dbsr_val & DBSR_IA1) {
- bug_ctx.current_bp = 1;
- addr = GET_IAC1 ();
- SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA2) {
- bug_ctx.current_bp = 2;
- addr = GET_IAC2 ();
- SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA3) {
- bug_ctx.current_bp = 3;
- addr = GET_IAC3 ();
- SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA4) {
- bug_ctx.current_bp = 4;
- addr = GET_IAC4 ();
- SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
- }
-
- bedbug_main_loop (addr, regs);
- return;
-} /* bedbug405_break_isr */
-\f
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug405_find_empty (void)
-{
- /* -------------------------------------------------- */
-
- if (GET_IAC1 () == 0)
- return 1;
-
- if (GET_IAC2 () == 0)
- return 2;
-
- if (GET_IAC3 () == 0)
- return 3;
-
- if (GET_IAC4 () == 0)
- return 4;
-
- return 0;
-} /* bedbug405_find_empty */
-\f
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_set (int which_bp, unsigned long addr)
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if ((bug_ctx.find_empty) && (!which_bp) &&
- (which_bp = (*bug_ctx.find_empty) ()) == 0) {
- printf ("All breakpoints in use\n");
- return 0;
- }
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # %d\n", which_bp);
- return 0;
- }
-
- if (!bug_ctx.hw_debug_enabled) {
- SET_MSR (GET_MSR () | 0x200); /* set MSR[ DE ] */
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
- bug_ctx.hw_debug_enabled = 1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
- break;
- }
-
- return which_bp;
-} /* bedbug405_set */
-\f
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_clear (int which_bp)
-{
- /* -------------------------------------------------- */
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # (%d)\n", which_bp);
- return -1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
- break;
- }
-
- return 0;
-} /* bedbug405_clear */
-
-
-/* ====================================================================== */
-#endif
+++ /dev/null
-/*
- * This file contains miscellaneous low-level functions.
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <config.h>
-#include <config.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/*
- * Flush instruction cache.
- */
-_GLOBAL(invalidate_icache)
- iccci r0,r0
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS 64
-#define CACHE_NLINES 32
-
-_GLOBAL(flush_dcache)
- li r4,(2 * CACHE_NWAYS * CACHE_NLINES)
- mtctr r4
- lis r5,0
-1: lwz r3,0(r5) /* Load one word from every line */
- addi r5,r5,L1_CACHE_BYTES
- bdnz 1b
- sync
- blr
-
-_GLOBAL(invalidate_dcache)
- addi r6,0,0x0000 /* clear GPR 6 */
- /* Do loop for # of dcache congruence classes. */
- lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
- ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6,L1_CACHE_BYTES /* bump to next line */
- bdnz ..dcloop
- sync
- blr
-
-/*
- * Cache functions.
- *
- * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
- * although for some cache-ralated calls stubs have to be provided to satisfy
- * symbols resolution.
- * Icache-related functions are used in POST framework.
- *
- */
-#ifdef CONFIG_440
-
- .globl dcache_disable
- .globl dcache_enable
- .globl icache_disable
- .globl icache_enable
-dcache_disable:
-dcache_enable:
-icache_disable:
-icache_enable:
- blr
-
- .globl dcache_status
- .globl icache_status
-dcache_status:
-icache_status:
- mr r3, 0
- blr
-
-#else /* CONFIG_440 */
-
- .globl icache_enable
-icache_enable:
- mflr r8
- bl invalidate_icache
- mtlr r8
- isync
- addis r3,r0, 0xc000 /* set bit 0 */
- mticcr r3
- blr
-
- .globl icache_disable
-icache_disable:
- addis r3,r0, 0x0000 /* clear bit 0 */
- mticcr r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mficcr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
- bl invalidate_dcache
- mtlr r8
- isync
- addis r3,r0, 0x8000 /* set bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r8
- bl flush_dcache
- mtlr r8
- addis r3,r0, 0x0000 /* clear bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfdccr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
-#endif /* CONFIG_440 */
+++ /dev/null
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/ppc4xx_config.h>
-#include <asm/io.h>
-
-static void print_configs(int cur_config_nr)
-{
- int i;
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- printf("%-16s - %s", ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
- if (i == cur_config_nr)
- printf(" ***");
- printf("\n");
- }
-
-}
-
-static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int i;
- int ret;
- int cur_config_nr = -1;
- u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
-
- /*
- * First switch to correct I2C bus. This is I2C bus 0
- * for all currently available 4xx derivats.
- */
- I2C_SET_BUS(0);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- if (ret) {
- printf("Error reading EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- /*
- * Search the current configuration
- */
- for (i = 0; i < ppc4xx_config_count; i++) {
- if (memcmp(cur_config, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
- cur_config_nr = i;
- }
-
- if (cur_config_nr == -1) {
- printf("Warning: The I2C bootstrap values don't match any"
- " of the available options!\n");
- printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
- printf("%02x ", cur_config[i]);
- }
- printf("\n");
- }
-
- if (argc < 2) {
- printf("Available configurations (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- print_configs(cur_config_nr);
- return 0;
- }
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- /*
- * Search for configuration name/label
- */
- if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
- printf("Using configuration:\n%-16s - %s\n",
- ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- if (ret) {
- printf("Error updating EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- printf("done (dump via 'i2c md %x 0.1 %x')\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
- printf("Reset the board for the changes to"
- " take effect\n");
- return 0;
- }
- }
-
- printf("Configuration %s not found!\n", argv[1]);
- print_configs(cur_config_nr);
- return -1;
-}
-
-U_BOOT_CMD(
- chip_config, 2, 0, do_chip_config,
- "program the I2C bootstrap EEPROM",
- "[config-label]"
-);
+++ /dev/null
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Atapted for ppc4XX by Denis Peter
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
-#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
-# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
-#endif
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- out_be32(save_addr, a);
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- return in_be32(save_addr);
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
+++ /dev/null
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
-
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
-PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
-else
-PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
-endif
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/ppc4xx/u-boot.lds
+++ /dev/null
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_reset(void);
-
-/*
- * To provide an interface to detect CPU number for boards that support
- * more then one CPU, we implement the "weak" default functions here.
- *
- * Returns CPU number
- */
-int __get_cpu_num(void)
-{
- return NA_OR_UNKNOWN_CPU;
-}
-int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
-
-#if defined(CONFIG_PCI)
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define PCI_ASYNC
-
-static int pci_async_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_SDSTP1, val);
- return (val & SDR0_SDSTP1_PAME_MASK);
-#endif
-}
-#endif
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
- !defined(CONFIG_405) && !defined(CONFIG_405EX)
-int pci_arbiter_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_440GP)
- return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long val;
-
- mfsdr(SDR0_XCR, val);
- return (val & 0x80000000);
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_PCI0, val);
- return (val & 0x80000000);
-#endif
-}
-#endif
-
-#if defined(CONFIG_405EP)
-#define I2C_BOOTROM
-
-static int i2c_bootrom_enabled(void)
-{
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
-#else
- unsigned long val;
-
- mfsdr(SDR0_SDCS0, val);
- return (val & SDR0_SDCS_SDD);
-#endif
-}
-#endif
-
-#if defined(CONFIG_440GX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (16 bits)",
- "EBC (8 bits)",
- "EBC (32 bits)",
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "Reserved",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define SDR0_PINSTP_SHIFT 30
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "NAND (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "PCI",
- "PCI",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
-#endif
-
-#if defined(CONFIG_460SX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (32 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
-#endif
-
-#if defined(CONFIG_405EZ)
-#define SDR0_PINSTP_SHIFT 28
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "SPI (fast)",
- "NAND (512 page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (32 bits)",
- "I2C (Addr 0x50)",
- "NAND (2K page, 5 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (16 bits)",
- "Reserved",
- "NAND (2K page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "NAND (512 page, 3 addr cycle)",
- "I2C (Addr 0x50)",
- "SPI (slow)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
- 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
-#endif
-
-#if defined(CONFIG_405EX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)",
- "EBC (8 bits)",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(SDR0_PINSTP_SHIFT)
-static int bootstrap_option(void)
-{
- unsigned long val;
-
- mfsdr(SDR0_PINSTP, val);
- return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
-}
-#endif /* SDR0_PINSTP_SHIFT */
-
-
-#if defined(CONFIG_440)
-static int do_chip_reset (unsigned long sys0, unsigned long sys1)
-{
- /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
- * reset.
- */
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */
- mtdcr (CPC0_SYS0, sys0);
- mtdcr (CPC0_SYS1, sys1);
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */
- mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
-
- return 1;
-}
-#endif
-
-
-int checkcpu (void)
-{
-#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 reg;
-#endif
-
-#if !defined(CONFIG_IOP480)
- char addstr[64] = "";
- sys_info_t sys_info;
- int cpu_num;
-
- cpu_num = get_cpu_num();
- if (cpu_num >= 0)
- printf("CPU%d: ", cpu_num);
- else
- puts("CPU: ");
-
- get_sys_info(&sys_info);
-
-#if defined(CONFIG_XILINX_440)
- puts("IBM PowerPC 4");
-#else
- puts("AMCC PowerPC 4");
-#endif
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX)
- puts("05");
-#endif
-#if defined(CONFIG_440)
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- puts("60");
-#else
- puts("40");
-#endif
-#endif
-
- switch (pvr) {
- case PVR_405GP_RB:
- puts("GP Rev. B");
- break;
-
- case PVR_405GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_405GP_RD:
- puts("GP Rev. D");
- break;
-
-#ifdef CONFIG_405GP
- case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
- puts("GP Rev. E");
- break;
-#endif
-
- case PVR_405CR_RA:
- puts("CR Rev. A");
- break;
-
- case PVR_405CR_RB:
- puts("CR Rev. B");
- break;
-
-#ifdef CONFIG_405CR
- case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
- puts("CR Rev. C");
- break;
-#endif
-
- case PVR_405GPR_RB:
- puts("GPr Rev. B");
- break;
-
- case PVR_405EP_RB:
- puts("EP Rev. B");
- break;
-
- case PVR_405EZ_RA:
- puts("EZ Rev. A");
- break;
-
- case PVR_405EX1_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RA:
- puts("EXr Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RC:
- puts("EX Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RC:
- puts("EX Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RD:
- puts("EX Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RD:
- puts("EX Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
-#if defined(CONFIG_440)
- case PVR_440GP_RB:
- puts("GP Rev. B");
- /* See errata 1.12: CHIP_4 */
- if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
- (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
- puts ( "\n\t CPC0_SYSx DCRs corrupted. "
- "Resetting chip ...\n");
- udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
- do_chip_reset ( mfdcr(CPC0_STRP0),
- mfdcr(CPC0_STRP1) );
- }
- break;
-
- case PVR_440GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_440GX_RA:
- puts("GX Rev. A");
- break;
-
- case PVR_440GX_RB:
- puts("GX Rev. B");
- break;
-
- case PVR_440GX_RC:
- puts("GX Rev. C");
- break;
-
- case PVR_440GX_RF:
- puts("GX Rev. F");
- break;
-
- case PVR_440EP_RA:
- puts("EP Rev. A");
- break;
-
-#ifdef CONFIG_440EP
- case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
- puts("EP Rev. B");
- break;
-
- case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */
- puts("EP Rev. C");
- break;
-#endif /* CONFIG_440EP */
-
-#ifdef CONFIG_440GR
- case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
- puts("GR Rev. A");
- break;
-
- case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */
- puts("GR Rev. B");
- break;
-#endif /* CONFIG_440GR */
-#endif /* CONFIG_440 */
-
-#ifdef CONFIG_440EPX
- case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440EPX */
-
-#ifdef CONFIG_440GRX
- case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440GRX */
-
- case PVR_440SP_6_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SP_6_RC:
- puts("SP Rev. C");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RC:
- puts("SP Rev. C");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- case PVR_460EX_RA:
- puts("EX Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460EX_SE_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460EX_RB:
- puts("EX Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RA:
- puts("GT Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460GT_SE_RA:
- puts("GT Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RB:
- puts("GT Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-#endif
-
- case PVR_460SX_RA:
- puts("SX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460SX_RA_V1:
- puts("SX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_460GX_RA:
- puts("GX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460GX_RA_V1:
- puts("GX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_VIRTEX5:
- puts("x5 VIRTEX5");
- break;
-
- default:
- printf (" UNKNOWN (PVR=%08x)", pvr);
- break;
- }
-
- printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
- strmhz(buf, clock),
- sys_info.freqPLB / 1000000,
- get_OPB_freq() / 1000000,
- sys_info.freqEBC / 1000000);
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
- printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
-#endif
- printf(")\n");
-
- if (addstr[0] != 0)
- printf(" %s\n", addstr);
-
-#if defined(I2C_BOOTROM)
- printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
-#endif /* I2C_BOOTROM */
-#if defined(SDR0_PINSTP_SHIFT)
- printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
- printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
-#ifdef CONFIG_NAND_U_BOOT
- puts(", booting from NAND");
-#endif /* CONFIG_NAND_U_BOOT */
- putc('\n');
-#endif /* SDR0_PINSTP_SHIFT */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
-#endif
-
-#if defined(CONFIG_PCI) && defined(PCI_ASYNC)
- if (pci_async_enabled()) {
- printf (", PCI async ext clock used");
- } else {
- printf (", PCI sync clock at %lu MHz",
- sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
- }
-#endif
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- putc('\n');
-#endif
-
-#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
- printf (" 16 kB I-Cache 16 kB D-Cache");
-#elif defined(CONFIG_440)
- printf (" 32 kB I-Cache 32 kB D-Cache");
-#else
- printf (" 16 kB I-Cache %d kB D-Cache",
- ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
-#endif
-#endif /* !defined(CONFIG_IOP480) */
-
-#if defined(CONFIG_IOP480)
- printf ("PLX IOP480 (PVR=%08x)", pvr);
- printf (" at %s MHz:", strmhz(buf, clock));
- printf (" %u kB I-Cache", 4);
- printf (" %u kB D-Cache", 2);
-#endif
-
-#endif /* !defined(CONFIG_405) */
-
- putc ('\n');
-
- return 0;
-}
-
-int ppc440spe_revB() {
- unsigned int pvr;
-
- pvr = get_pvr();
- if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
- return 1;
- else
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-#if defined(CONFIG_BOARD_RESET)
- board_reset();
-#else
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
-#else
- /*
- * Initiate system reset in debug control register DBCR
- */
- mtspr(SPRN_DBCR0, 0x30000000);
-#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
-#endif /* defined(CONFIG_BOARD_RESET) */
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-#if !defined(CONFIG_IOP480)
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- return (sys_info.freqProcessor);
-#else
- return (66000000);
-#endif
-
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_4xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void reset_4xx_watchdog(void)
-{
- /*
- * Clear TSR(WIS) bit
- */
- mtspr(SPRN_TSR, 0x40000000);
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_PPC4xx_EMAC)
- ppc_4xx_eth_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <ppc4xx_enet.h>
-#include <asm/processor.h>
-#include <asm/gpio.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#ifndef CONFIG_SYS_PLL_RECONFIG
-#define CONFIG_SYS_PLL_RECONFIG 0
-#endif
-
-void reconfigure_pll(u32 new_cpu_freq)
-{
-#if defined(CONFIG_440EPX)
- int reset_needed = 0;
- u32 reg, temp;
- u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
- fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
- fbdv, target_fbdv, lfbdv, target_lfbdv,
- perdv0, target_perdv0, /* CLK_PERD */
- spcid0, target_spcid0; /* CLK_SPCID */
-
- /* Reconfigure clocks if necessary.
- * See PPC440EPx User's Manual, sections 8.2 and 14 */
- if (new_cpu_freq == 667) {
- target_prbdv0 = 2;
- target_fwdva = 2;
- target_fwdvb = 4;
- target_fbdv = 20;
- target_lfbdv = 1;
- target_perdv0 = 4;
- target_spcid0 = 4;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
- if (prbdv0 != target_prbdv0) {
- reg &= ~PRBDV_MASK;
- reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
- mtcpr(CPR0_PRIMBD0, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PLLD, reg);
-
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdva = temp ? temp : 16;
-
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdvb = temp ? temp : 8;
-
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
-
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
-
- if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
- ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
- ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
- (target_lfbdv == 64 ? 0 : target_lfbdv);
- mtcpr(CPR0_PLLD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PERD, reg);
- perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
- if (perdv0 != target_perdv0) {
- reg &= ~CPR0_PERD_PERDV0_MASK;
- reg |= (target_perdv0 << 24);
- mtcpr(CPR0_PERD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
- spcid0 = temp ? temp : 4;
- if (spcid0 != target_spcid0) {
- reg &= ~CPR0_SPCID_SPCIDV0_MASK;
- reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
- mtcpr(CPR0_SPCID, reg);
- reset_needed = 1;
- }
- }
-
- /* Get current value of FWDVA.*/
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
-
- /*
- * Check to see if FWDVA has been set to value of 1. if it has we must
- * modify it.
- */
- if (temp == 1) {
- mfcpr(CPR0_PLLD, reg);
- /* Get current value of fbdv. */
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
- /* Get current value of lfbdv. */
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
- /*
- * Load register that contains current boot strapping option.
- */
- mfcpr(CPR0_ICFG, reg);
- /* Shift strapping option into low 3 bits.*/
- reg = (reg >> 28);
-
- if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
- (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
- /*
- * Get current value of FWDVA. Assign current FWDVA to
- * new FWDVB.
- */
- mfcpr(CPR0_PLLD, reg);
- target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdvb = target_fwdvb ? target_fwdvb : 8;
- /*
- * Get current value of FWDVB. Assign current FWDVB to
- * new FWDVA.
- */
- target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdva = target_fwdva ? target_fwdva : 16;
- /*
- * Update CPR0_PLLD with switched FWDVA and FWDVB.
- */
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
- ((fwdvb == 8 ? 0 : fwdvb) << 8) |
- ((fbdv == 32 ? 0 : fbdv) << 24) |
- (lfbdv == 64 ? 0 : lfbdv);
- mtcpr(CPR0_PLLD, reg);
- /* Acknowledge that a reset is required. */
- reset_needed = 1;
- }
- }
-
- if (reset_needed) {
- /*
- * Set reload inhibit so configuration will persist across
- * processor resets
- */
- mfcpr(CPR0_ICFG, reg);
- reg &= ~CPR0_ICFG_RLI_MASK;
- reg |= 1 << 31;
- mtcpr(CPR0_ICFG, reg);
-
- /* Reset processor if configuration changed */
- __asm__ __volatile__ ("sync; isync");
- mtspr(SPRN_DBCR0, 0x20000000);
- }
-#endif
-}
-
-/*
- * Breath some life into the CPU...
- *
- * Reconfigure PLL if necessary,
- * set up the memory map,
- * initialize a bunch of registers
- */
-void
-cpu_init_f (void)
-{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
- u32 val;
-#endif
-
- reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
-
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
- /*
- * GPIO0 setup (select GPIO or alternate function)
- */
-#if defined(CONFIG_SYS_GPIO0_OR)
- out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
-#endif
-#if defined(CONFIG_SYS_GPIO0_ODR)
- out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
-#endif
- out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
- out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
- out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
- out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
- out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-#if defined(CONFIG_SYS_GPIO0_ISR2H)
- out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
- out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
-#endif
-#if defined (CONFIG_SYS_GPIO0_TCR)
- out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
-#endif
-#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
-
-#if defined (CONFIG_405EP)
- /*
- * Set EMAC noise filter bits
- */
- mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
- gpio_set_chip_configuration();
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
-
- /*
- * External Bus Controller (EBC) Setup
- */
-#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405))
- /*
- * Move the next instructions into icache, since these modify the flash
- * we are running from!
- */
- asm volatile(" bl 0f" ::: "lr");
- asm volatile("0: mflr 3" ::: "r3");
- asm volatile(" addi 4, 0, 14" ::: "r4");
- asm volatile(" mtctr 4" ::: "ctr");
- asm volatile("1: icbt 0, 3");
- asm volatile(" addi 3, 3, 32" ::: "r3");
- asm volatile(" bdnz 1b" ::: "ctr", "cr0");
- asm volatile(" addis 3, 0, 0x0" ::: "r3");
- asm volatile(" ori 3, 3, 0xA000" ::: "r3");
- asm volatile(" mtctr 3" ::: "ctr");
- asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
-#endif
-
- mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
- mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
- mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
- mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
- mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
- mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
- mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
- mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
- mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
- mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
- mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
- mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
- mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
- mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
- mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
- mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
-#endif
-
-#if defined (CONFIG_SYS_EBC_CFG)
- mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- val = mfspr(tcr);
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- val |= 0xb8000000; /* generate system reset after 1.34 seconds */
-#elif defined(CONFIG_440EPX)
- val |= 0xb0000000; /* generate system reset after 1.34 seconds */
-#else
- val |= 0xf0000000; /* generate system reset after 2.684 seconds */
-#endif
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- val &= ~0x30000000; /* clear WRC bits */
- val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
-#endif
- mtspr(tcr, val);
-
- val = mfspr(tsr);
- val |= 0x80000000; /* enable watchdog timer */
- mtspr(tsr, val);
-
- reset_4xx_watchdog();
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_440GX)
- /* Take the GX out of compatibility mode
- * Travis Sawyer, 9 Mar 2004
- * NOTE: 440gx user manual inconsistency here
- * Compatibility mode and Ethernet Clock select are not
- * correct in the manual
- */
- mfsdr(SDR0_MFR, val);
- val &= ~0x10000000;
- mtsdr(SDR0_MFR,val);
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_460EX)
- /*
- * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
- * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
- * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
- */
- mfsdr(SDR0_AHB_CFG, val);
- val |= 0x80;
- val &= ~0x40;
- mtsdr(SDR0_AHB_CFG, val);
- mfsdr(SDR0_USB2HOST_CFG, val);
- val &= ~0xf00;
- val |= 0x400;
- mtsdr(SDR0_USB2HOST_CFG, val);
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
- */
- mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
- PLB0_ACR_RDP_4DEEP);
- mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
- PLB1_ACR_RDP_4DEEP);
-#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_405GP)
- uint pvr = get_pvr();
-
- /*
- * Set edge conditioning circuitry on PPC405GPr
- * for compatibility to existing PPC405GP designs.
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- mtdcr(CPC0_ECR, 0x60606000);
- }
-#endif /* defined(CONFIG_405GP) */
-
- return 0;
-}
-
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
-/*
- * 440EP(x)/GR(x) PCI async/sync clocking restriction:
- *
- * In asynchronous PCI mode, the synchronous PCI clock must meet
- * certain requirements. The following equation describes the
- * relationship that must be maintained between the asynchronous PCI
- * clock and synchronous PCI clock. Select an appropriate PCI:PLB
- * ratio to maintain the relationship:
- *
- * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
- */
-static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
-{
- if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
- return 0;
- else
- return 1;
-}
-
-int ppc4xx_pci_sync_clock_config(u32 async)
-{
- sys_info_t sys_info;
- u32 sync;
- int div;
- u32 reg;
- u32 spcid_val[] = {
- CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
- CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
-
- get_sys_info(&sys_info);
- sync = sys_info.freqPCI;
-
- /*
- * First check if the equation above is met
- */
- if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
- /*
- * Reconfigure PCI sync clock to meet the equation.
- * Start with highest possible PCI sync frequency
- * (divider 1).
- */
- for (div = 1; div <= 4; div++) {
- sync = sys_info.freqPLB / div;
- if (ppc4xx_pci_sync_clock_ok(sync, async))
- break;
- }
-
- if (div <= 4) {
- mtcpr(CPR0_SPCID, spcid_val[div]);
-
- mfcpr(CPR0_ICFG, reg);
- reg |= CPR0_ICFG_RLI_MASK;
- mtcpr(CPR0_ICFG, reg);
-
- /* do chip reset */
- mtspr(SPRN_DBCR0, 0x20000000);
- } else {
- /* Impossible to configure the PCI sync clock */
- return -1;
- }
- }
-
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define _ASMLANGUAGE
-
-/*****************************************************************************
- *
- * XXX - DANGER
- * These routines make use of self modifying code. DO NOT CALL THEM
- * UNTIL THEY ARE RELOCATED TO RAM. Additionally, I do not
- * recommend them for use in anything other than an interactive
- * debugging environment. This is mainly due to performance reasons.
- *
- ****************************************************************************/
-
-/*
- * static void _create_MFDCR(unsigned short dcrn)
- *
- * Builds a 'mfdcr' instruction for get_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MFDCR,@function
-_create_MFDCR:
- /*
- * Build up a 'mfdcr' instruction formatted as follows:
- *
- * OPCD | RT | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 323 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RT = destination register - %r3 return register
- * DCRF = DCRN # with upper and lower halves swapped
- * XO = extended opcode - 323
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e30 /* RT = %r3 */
- ori r3, r3, 323 /* XO = 323 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r4
- stw r3, 0(r4) /* Store instr in get_dcr() */
- dcbst r0, r4 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r4 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe1: .size _create_MFDCR,.Lfe1-_create_MFDCR
-/* end _create_MFDCR() */
-
-/*
- * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
- *
- * Builds a 'mtdcr' instruction for set_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MTDCR,@function
-_create_MTDCR:
- /*
- * Build up a 'mtdcr' instruction formatted as follows:
- *
- * OPCD | RS | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 451 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RS = source register - %r4
- * DCRF = dest. DCRN # with upper and lower halves swapped
- * XO = extended opcode - 451
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e40 /* RS = %r4 */
- ori r3, r3, 451 /* XO = 451 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r5
- stw r3, 0(r5) /* Store instr in set_dcr() */
- dcbst r0, r5 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r5 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe2: .size _create_MTDCR,.Lfe2-_create_MTDCR
-/* end _create_MTDCR() */
-
-
-/*
- * unsigned long get_dcr(unsigned short dcrn)
- *
- * Return a given DCR's value.
- */
- /* */
- /* XXX - This is self modifying code, hence */
- /* it is in the data section. */
- /* */
- .section ".data"
- .align 2
- .globl get_dcr
- .type get_dcr,@function
-get_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MFDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Get DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe3: .size get_dcr,.Lfe3-get_dcr
-/* end get_dcr() */
-
-
-/*
- * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
- *
- * Return a given DCR's value.
- */
- /*
- * XXX - This is self modifying code, hence
- * it is in the data section.
- */
- .section ".data"
- .align 2
- .globl set_dcr
- .type set_dcr,@function
-set_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MTDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Set DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe4: .size set_dcr,.Lfe4-set_dcr
-/* end set_dcr() */
-#endif
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/denali_data_eye.c
- * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
- *
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/*-----------------------------------------------------------------------------+
- * denali_wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-int denali_wait_for_dlllock(void)
-{
- u32 val;
- int wait;
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- for (wait = 0; wait != 0xffff; ++wait) {
- mfsdram(DDR0_17, val);
- if (DDR0_17_DLLLOCKREG_DECODE(val)) {
- /* dlllockreg bit on */
- return 0;
- }
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
- return -1;
-}
-
-#if defined(CONFIG_DDR_DATA_EYE)
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-static int wait_for_dram_init_complete(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* --------------------------------------------------------------+
- * Wait for 'DRAM initialization complete' bit in status register
- * -------------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
- debug("DRAM initialization complete bit in status register did not "
- "rise\n");
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(void)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
- };
-
- ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
- dll_dqs_delay_X++) {
- /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
- dll_dqs_delay_X++) { */
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* clear any ECC errors */
- mtdcr(ddrcfga, DDR0_00);
- mtdcr(ddrcfgd,
- mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur!!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j = 0; j < NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
- }
-
- /* read values back */
- for (j = 0; j < NUM_TRIES; j++) {
- for (k = 0; k < NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer
- [j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed. */
- mtdcr(ddrcfga, DDR0_00);
- if (j < NUM_TRIES
- || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
- 0x3F)) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val =
- dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases =
- wr_dqs_shift;
- dll_dqs_delay_X_start_window =
- dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window =
- dll_dqs_delay_X;
- }
- }
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /* -----------------------------------------------------------+
- * Largest passing window is now detected.
- * ----------------------------------------------------------*/
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
- dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* defined(CONFIG_DDR_DATA_EYE) */
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+++ /dev/null
-/*
- * arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
- * DDR2 controller, specifically the 440EPx/GRx.
- *
- * (C) Copyright 2007-2008
- * Larry Johnson, lrj@acm.org.
- *
- * Based primarily on arch/ppc/cpu/ppc4xx/4xx_spd_ddr2.c, which is...
- *
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define MAXDIMMS 2
-#define MAXRANKS 2
-
-#define ONE_BILLION 1000000000
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#define DLL_DQS_DELAY 0x19
-#define DLL_DQS_BYPASS 0x0B
-#define DQS_OUT_SHIFT 0x7F
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#if defined(CONFIG_4xx_DCACHE)
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-extern void dcbz_area(u32 start_address, u32 num_bytes);
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void spd_ddr_init_hang(void)
- __attribute__ ((weak, alias("__spd_ddr_init_hang")));
-
-#if defined(DEBUG)
-static void print_mcsr(void)
-{
- printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
-}
-
-static void denali_sdram_register_dump(void)
-{
- unsigned int sdram_data;
-
- printf("\n Register Dump:\n");
- mfsdram(DDR0_00, sdram_data);
- printf(" DDR0_00 = 0x%08X", sdram_data);
- mfsdram(DDR0_01, sdram_data);
- printf(" DDR0_01 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_02, sdram_data);
- printf(" DDR0_02 = 0x%08X", sdram_data);
- mfsdram(DDR0_03, sdram_data);
- printf(" DDR0_03 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_04, sdram_data);
- printf(" DDR0_04 = 0x%08X", sdram_data);
- mfsdram(DDR0_05, sdram_data);
- printf(" DDR0_05 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_06, sdram_data);
- printf(" DDR0_06 = 0x%08X", sdram_data);
- mfsdram(DDR0_07, sdram_data);
- printf(" DDR0_07 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_08, sdram_data);
- printf(" DDR0_08 = 0x%08X", sdram_data);
- mfsdram(DDR0_09, sdram_data);
- printf(" DDR0_09 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_10, sdram_data);
- printf(" DDR0_10 = 0x%08X", sdram_data);
- mfsdram(DDR0_11, sdram_data);
- printf(" DDR0_11 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_12, sdram_data);
- printf(" DDR0_12 = 0x%08X", sdram_data);
- mfsdram(DDR0_14, sdram_data);
- printf(" DDR0_14 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_17, sdram_data);
- printf(" DDR0_17 = 0x%08X", sdram_data);
- mfsdram(DDR0_18, sdram_data);
- printf(" DDR0_18 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_19, sdram_data);
- printf(" DDR0_19 = 0x%08X", sdram_data);
- mfsdram(DDR0_20, sdram_data);
- printf(" DDR0_20 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_21, sdram_data);
- printf(" DDR0_21 = 0x%08X", sdram_data);
- mfsdram(DDR0_22, sdram_data);
- printf(" DDR0_22 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_23, sdram_data);
- printf(" DDR0_23 = 0x%08X", sdram_data);
- mfsdram(DDR0_24, sdram_data);
- printf(" DDR0_24 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_25, sdram_data);
- printf(" DDR0_25 = 0x%08X", sdram_data);
- mfsdram(DDR0_26, sdram_data);
- printf(" DDR0_26 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_27, sdram_data);
- printf(" DDR0_27 = 0x%08X", sdram_data);
- mfsdram(DDR0_28, sdram_data);
- printf(" DDR0_28 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_31, sdram_data);
- printf(" DDR0_31 = 0x%08X", sdram_data);
- mfsdram(DDR0_32, sdram_data);
- printf(" DDR0_32 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_33, sdram_data);
- printf(" DDR0_33 = 0x%08X", sdram_data);
- mfsdram(DDR0_34, sdram_data);
- printf(" DDR0_34 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_35, sdram_data);
- printf(" DDR0_35 = 0x%08X", sdram_data);
- mfsdram(DDR0_36, sdram_data);
- printf(" DDR0_36 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_37, sdram_data);
- printf(" DDR0_37 = 0x%08X", sdram_data);
- mfsdram(DDR0_38, sdram_data);
- printf(" DDR0_38 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_39, sdram_data);
- printf(" DDR0_39 = 0x%08X", sdram_data);
- mfsdram(DDR0_40, sdram_data);
- printf(" DDR0_40 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_41, sdram_data);
- printf(" DDR0_41 = 0x%08X", sdram_data);
- mfsdram(DDR0_42, sdram_data);
- printf(" DDR0_42 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_43, sdram_data);
- printf(" DDR0_43 = 0x%08X", sdram_data);
- mfsdram(DDR0_44, sdram_data);
- printf(" DDR0_44 = 0x%08X\n", sdram_data);
-}
-#else
-static inline void denali_sdram_register_dump(void)
-{
-}
-
-inline static void print_mcsr(void)
-{
-}
-#endif /* defined(DEBUG) */
-
-static int is_ecc_enabled(void)
-{
- u32 val;
-
- mfsdram(DDR0_22, val);
- return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
-}
-
-static unsigned char spd_read(u8 chip, unsigned int addr)
-{
- u8 data[2];
-
- if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
- debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
- return 0;
- }
- debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
- chip, addr, data[0]);
- return data[0];
-}
-
-static unsigned long get_tcyc(unsigned char reg)
-{
- /*
- * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
- * nibbles: the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns; the value presented by the lower order
- * nibble (bits 0-3) has a granularity of .1ns and is added to the value
- * designated by the higher nibble. In addition, four lines of the lower
- * order nibble are assigned to support +.25, +.33, +.66, and +.75.
- */
-
- unsigned char subfield_b = reg & 0x0F;
-
- switch (subfield_b & 0x0F) {
- case 0x0:
- case 0x1:
- case 0x2:
- case 0x3:
- case 0x4:
- case 0x5:
- case 0x6:
- case 0x7:
- case 0x8:
- case 0x9:
- return 1000 * (reg >> 4) + 100 * subfield_b;
- case 0xA:
- return 1000 * (reg >> 4) + 250;
- case 0xB:
- return 1000 * (reg >> 4) + 333;
- case 0xC:
- return 1000 * (reg >> 4) + 667;
- case 0xD:
- return 1000 * (reg >> 4) + 750;
- }
- return 0;
-}
-
-/*------------------------------------------------------------------
- * Find the installed DIMMs, make sure that the are DDR2, and fill
- * in the dimm_ranks array. Then dimm_ranks[dimm_num] > 0 iff the
- * DIMM and dimm_num is present.
- * Note: Because there are only two chip-select lines, it is assumed
- * that a board with a single socket can support two ranks on that
- * socket, while a board with two sockets can support only one rank
- * on each socket.
- *-----------------------------------------------------------------*/
-static void get_spd_info(unsigned long dimm_ranks[],
- unsigned long *ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found = FALSE;
- unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- *ranks = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- if ((num_of_bytes != 0) && (total_size != 0)) {
- unsigned char const dimm_type =
- spd_read(iic0_dimm_addr[dimm_num], 2);
-
- unsigned long ranks_on_dimm =
- (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
-
- if (8 != dimm_type) {
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode "
- "DRAM DIMM");
- break;
- case 2:
- printf("ERROR: EDO DIMM");
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM");
- break;
- case 4:
- printf("ERROR: SDRAM DIMM");
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM");
- break;
- case 6:
- printf("ERROR: SGRAM DIMM");
- break;
- case 7:
- printf("ERROR: DDR1 DIMM");
- break;
- default:
- printf("ERROR: Unknown DIMM (type %d)",
- (unsigned int)dimm_type);
- break;
- }
- printf(" detected in slot %lu.\n", dimm_num);
- printf("Only DDR2 SDRAM DIMMs are supported."
- "\n");
- printf("Replace the module with a DDR2 DIMM."
- "\n\n");
- spd_ddr_init_hang();
- }
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
- "\n", dimm_num, ranks_on_dimm);
- if (ranks_on_dimm > max_ranks_per_dimm) {
- printf("WARNING: DRAM DIMM in slot %lu has %lu "
- "ranks.\n", dimm_num, ranks_on_dimm);
- if (1 == max_ranks_per_dimm) {
- printf("Only one rank will be used.\n");
- } else {
- printf
- ("Only two ranks will be used.\n");
- }
- ranks_on_dimm = max_ranks_per_dimm;
- }
- dimm_ranks[dimm_num] = ranks_on_dimm;
- *ranks += ranks_on_dimm;
- } else {
- dimm_ranks[dimm_num] = 0;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
- if (dimm_found == FALSE) {
- printf("ERROR: No memory installed.\n");
- printf("Install at least one DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- debug("Total number of ranks = %d\n", *ranks);
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in picoseconds to match the way DIMM cycle time is
- * calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- cycle_time =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
- debug("cycle_time=%d ps\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time. The
- * additionnal 10ps is here to accept a small
- * incertainty.
- */
- printf
- ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)cycle_time,
- (unsigned int)dimm_num,
- (unsigned int)calc_cycle_time);
- printf
- ("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * This routine gets size information for the installed memory
- * DIMMs.
- *-----------------------------------------------------------------*/
-static void get_dimm_size(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long *const rows,
- unsigned long *const banks,
- unsigned long *const cols, unsigned long *const width)
-{
- unsigned long dimm_num;
-
- *rows = 0;
- *banks = 0;
- *cols = 0;
- *width = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- unsigned long t;
-
- /* Rows */
- t = spd_read(iic0_dimm_addr[dimm_num], 3);
- if (0 == *rows) {
- *rows = t;
- } else if (t != *rows) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of rows.\n\n");
- spd_ddr_init_hang();
- }
- /* Banks */
- t = spd_read(iic0_dimm_addr[dimm_num], 17);
- if (0 == *banks) {
- *banks = t;
- } else if (t != *banks) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of banks.\n\n");
- spd_ddr_init_hang();
- }
- /* Columns */
- t = spd_read(iic0_dimm_addr[dimm_num], 4);
- if (0 == *cols) {
- *cols = t;
- } else if (t != *cols) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of columns.\n\n");
- spd_ddr_init_hang();
- }
- /* Data width */
- t = spd_read(iic0_dimm_addr[dimm_num], 6);
- if (0 == *width) {
- *width = t;
- } else if (t != *width) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same data width.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
- debug("Number of rows = %d\n", *rows);
- debug("Number of columns = %d\n", *cols);
- debug("Number of banks = %d\n", *banks);
- debug("Data width = %d\n", *width);
- if (*rows > 14) {
- printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
- *rows);
- printf("Only modules with 14 or fewer rows are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (4 != *banks && 8 != *banks) {
- printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
- printf("Only modules with 4 or 8 banks are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (*cols > 12) {
- printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
- *cols);
- printf("Only modules with 12 or fewer columns are "
- "supported.\n\n");
- spd_ddr_init_hang();
- }
- if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
- printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
- *width);
- printf("Only modules with widths of 32, 40, 64, and 72 bits "
- "are supported.\n\n");
- spd_ddr_init_hang();
- }
-}
-
-/*------------------------------------------------------------------
- * Only 1.8V modules are supported. This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (0x05 != voltage_type) { /* 1.8V for DDR2 */
- printf("ERROR: Slot %lu provides 1.8V for DDR2 "
- "DIMMs.\n", dimm_num);
- switch (voltage_type) {
- case 0x00:
- printf("This DIMM is 5.0 Volt/TTL.\n");
- break;
- case 0x01:
- printf("This DIMM is LVTTL.\n");
- break;
- case 0x02:
- printf("This DIMM is 1.5 Volt.\n");
- break;
- case 0x03:
- printf("This DIMM is 3.3 Volt/TTL.\n");
- break;
- case 0x04:
- printf("This DIMM is 2.5 Volt.\n");
- break;
- default:
- printf("This DIMM is an unknown "
- "voltage.\n");
- break;
- }
- printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-static void program_ddr0_03(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long rows, unsigned long *cas_latency)
-{
- unsigned long dimm_num;
- unsigned long cas_index;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ps = 100;
- unsigned long max_3_0_tcyc_ps = 100;
- unsigned long max_4_0_tcyc_ps = 100;
- unsigned long max_5_0_tcyc_ps = 100;
- unsigned char cas_available = 0x3C; /* value for DDR2 */
- u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
- unsigned int const tcyc_addr[3] = { 9, 23, 25 };
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- debug("sdram_freq = %d\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned char const cas_bit =
- spd_read(iic0_dimm_addr[dimm_num], 18);
- unsigned char cas_mask;
-
- cas_available &= cas_bit;
- for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
- if (cas_bit & cas_mask)
- break;
- }
- debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
- cas_bit, cas_mask);
-
- for (cas_index = 0; cas_index < 3;
- cas_mask >>= 1, cas_index++) {
- unsigned long cycle_time_ps;
-
- if (!(cas_available & cas_mask)) {
- continue;
- }
- cycle_time_ps =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
- tcyc_addr[cas_index]));
-
- debug("cas_index = %d: cycle_time_ps = %d\n",
- cas_index, cycle_time_ps);
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- switch (cas_mask) {
- case 0x20:
- max_5_0_tcyc_ps =
- max(max_5_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x10:
- max_4_0_tcyc_ps =
- max(max_4_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x08:
- max_3_0_tcyc_ps =
- max(max_3_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x04:
- max_2_0_tcyc_ps =
- max(max_2_0_tcyc_ps, cycle_time_ps);
- break;
- }
- }
- }
- }
- debug("cas_available (bit map) = 0x%02X\n", cas_available);
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
- debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
- debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
- debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
- debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
-
- if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
- *cas_latency = 2;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
- DDR0_03_CASLAT_LIN_ENCODE(0x4);
- } else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
- *cas_latency = 3;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
- DDR0_03_CASLAT_LIN_ENCODE(0x6);
- } else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
- *cas_latency = 4;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
- DDR0_03_CASLAT_LIN_ENCODE(0x8);
- } else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
- *cas_latency = 5;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
- DDR0_03_CASLAT_LIN_ENCODE(0xA);
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the "
- "installed DIMMs.\n");
- printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
- "and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range "
- "of the DIMMs.\n");
- printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
- "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
- cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang();
- }
- debug("CAS latency = %d\n", *cas_latency);
- mtsdram(DDR0_03, ddr0_03);
-}
-
-static void program_ddr0_04(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rc_ps = 0;
- unsigned long t_rrd_ps = 0;
- unsigned long t_rtp_ps = 0;
- unsigned long t_rc_clk;
- unsigned long t_rrd_clk;
- unsigned long t_rtp_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
- switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rc_ps = max(t_rc_ps, ps);
- /* tRRD */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
- t_rrd_ps = max(t_rrd_ps, ps);
- /* tRTP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
- t_rtp_ps = max(t_rtp_ps, ps);
- }
- }
- debug("t_rc_ps = %d\n", t_rc_ps);
- t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rrd_ps = %d\n", t_rrd_ps);
- t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rtp_ps = %d\n", t_rtp_ps);
- t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
- DDR0_04_TRRD_ENCODE(t_rrd_clk) |
- DDR0_04_TRTP_ENCODE(t_rtp_clk));
-}
-
-static void program_ddr0_05(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rp_ps = 0;
- unsigned long t_ras_ps = 0;
- unsigned long t_rp_clk;
- unsigned long t_ras_clk;
- u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
- t_rp_ps = max(t_rp_ps, ps);
- /* tRAS */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
- t_ras_ps = max(t_ras_ps, ps);
- }
- }
- debug("t_rp_ps = %d\n", t_rp_ps);
- t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
- debug("t_ras_ps = %d\n", t_ras_ps);
- t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
- DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
-}
-
-static void program_ddr0_06(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned char spd_40;
- unsigned long t_wtr_ps = 0;
- unsigned long t_rfc_ps = 0;
- unsigned long t_wtr_clk;
- unsigned long t_rfc_clk;
- u32 ddr0_06 =
- DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tWTR */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
- t_wtr_ps = max(t_wtr_ps, ps);
- /* tRFC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
- spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
- ps += 256000 * (spd_40 & 0x01);
- switch ((spd_40 & 0x0E) >> 1) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rfc_ps = max(t_rfc_ps, ps);
- }
- }
- debug("t_wtr_ps = %d\n", t_wtr_ps);
- t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rfc_ps = %d\n", t_rfc_ps);
- t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
- DDR0_06_TRFC_ENCODE(t_rfc_clk));
-}
-
-static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
-{
- unsigned long csmap;
-
- if (2 == ranks) {
- /* Both chip selects in use */
- csmap = 0x03;
- } else {
- /* One chip select in use */
- csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
- }
- mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
- DDR0_10_CS_MAP_ENCODE(csmap) |
- DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
-}
-
-static void program_ddr0_11(unsigned long sdram_freq)
-{
- unsigned long const t_xsnr_ps = 200000; /* 200 ns */
- unsigned long t_xsnr_clk;
-
- debug("t_xsnr_ps = %d\n", t_xsnr_ps);
- t_xsnr_clk =
- (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
- DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
-}
-
-static void program_ddr0_22(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks, unsigned long width)
-{
-#if defined(CONFIG_DDR_ECC)
- unsigned long dimm_num;
- unsigned long ecc_available = width >= 64;
- u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- /* Check for ECC */
- if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
- 0x02)) {
- ecc_available = FALSE;
- }
- }
- }
- if (ecc_available) {
- debug("ECC found on all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
- } else {
- debug("ECC not found on some or all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
- }
-#else
- mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
- DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
-#endif /* defined(CONFIG_DDR_ECC) */
-}
-
-static void program_ddr0_24(unsigned long ranks)
-{
- u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) | /* 75 ohm */
- DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
-
- if (2 == ranks) {
- /* Both chip selects in use */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
- } else {
- /* One chip select in use */
- /* One of the two fields added to ddr0_24 is a "don't care" */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
- }
- mtsdram(DDR0_24, ddr0_24);
-}
-
-static void program_ddr0_26(unsigned long sdram_freq)
-{
- unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
- /* TODO: check definition of tRAS_MAX */
- unsigned long const t_ras_max_ps = 9 * t_ref_ps;
- unsigned long t_ras_max_clk;
- unsigned long t_ref_clk;
-
- /* Round down t_ras_max_clk and t_ref_clk */
- debug("t_ras_max_ps = %d\n", t_ras_max_ps);
- t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
- debug("t_ref_ps = %d\n", t_ref_ps);
- t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
- mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
- DDR0_26_TREF_ENCODE(t_ref_clk));
-}
-
-static void program_ddr0_27(unsigned long sdram_freq)
-{
- unsigned long const t_init_ps = 200000000; /* 200 us. init */
- unsigned long t_init_clk;
-
- debug("t_init_ps = %d\n", t_init_ps);
- t_init_clk =
- (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
- DDR0_27_TINIT_ENCODE(t_init_clk));
-}
-
-static void program_ddr0_43(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long cols, unsigned long banks)
-{
- unsigned long dimm_num;
- unsigned long t_wr_ps = 0;
- unsigned long t_wr_clk;
- u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
- DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
- DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
- t_wr_ps = max(t_wr_ps, ps);
- }
- }
- debug("t_wr_ps = %d\n", t_wr_ps);
- t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
-}
-
-static void program_ddr0_44(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rcd_ps = 0;
- unsigned long t_rcd_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
- t_rcd_ps = max(t_rcd_ps, ps);
- }
- }
- debug("t_rcd_ps = %d\n", t_rcd_ps);
- t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_ranks[MAXDIMMS];
- unsigned long ranks;
- unsigned long rows;
- unsigned long banks;
- unsigned long cols;
- unsigned long width;
- unsigned long const sdram_freq = get_bus_freq(0);
- unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr); /* on board dimm banks */
- unsigned long cas_latency = 0; /* to quiet initialization warning */
- unsigned long dram_size;
-
- debug("\nEntering initdram()\n");
-
- /*------------------------------------------------------------------
- * Stop the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*------------------------------------------------------------------
- * Check and get size information.
- *-----------------------------------------------------------------*/
- get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
- &cols, &width);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program registers for SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
- DDR0_00_DLL_START_POINT_DECODE(0x0A));
-
- mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
- DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
- DDR0_01_INT_MASK_ENCODE(0xFF));
-
- program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- rows, &cas_latency);
-
- program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*
- * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
- * board SDRAM, but may be overly conservative.
- */
- mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
- DDR0_07_TFAW_ENCODE(13) |
- DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
- DDR0_07_AREFRESH_ENCODE(0));
-
- mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
- DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
- DDR0_08_DDRII_ENCODE(1));
-
- mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
- DDR0_09_RTT_0_ENCODE(0x1) |
- DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
-
- program_ddr0_10(dimm_ranks, ranks);
-
- program_ddr0_11(sdram_freq);
-
- mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
-
- mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
- DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
- DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
-
- mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
-
- mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
-
- program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
-
- mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
- DDR0_23_FWC_ENCODE(0));
-
- program_ddr0_24(ranks);
-
- program_ddr0_26(sdram_freq);
-
- program_ddr0_27(sdram_freq);
-
- mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
- DDR0_28_EMRS2_DATA_ENCODE(0x0000));
-
- mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
-
- mtsdram(DDR0_42, DDR0_42_ADDR_PINS_ENCODE(14 - rows) |
- DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
-
- program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- cols, banks);
-
- program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- denali_sdram_register_dump();
-
- dram_size = (width >= 64) ? 8 : 4;
- dram_size *= 1 << cols;
- dram_size *= banks;
- dram_size *= 1 << rows;
- dram_size *= ranks;
- debug("dram_size = %lu\n", dram_size);
-
- /* Start the SDRAM controler */
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
- denali_wait_for_dlllock();
-
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Map the first 1 MiB of memory in the TLB, and perform the data eye
- * search.
- */
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
- denali_core_search_data_eye();
- denali_sdram_register_dump();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
-#endif
-
-#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
- sync();
- /* Zero the memory */
- debug("Zeroing SDRAM...");
-#if defined(CONFIG_SYS_MEM_TOP_HIDE)
- dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
-#else
-#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
-#endif
- /* Write modified dcache lines back to memory */
- clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
- debug("Completed\n");
- sync();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
-
-#if defined(CONFIG_DDR_ECC)
- /*
- * If ECC is enabled, clear and enable interrupts
- */
- if (is_ecc_enabled()) {
- u32 val;
-
- sync();
- /* Clear error status */
- mfsdram(DDR0_00, val);
- mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
- /* Set 'int_mask' parameter to functionnal value */
- mfsdram(DDR0_01, val);
- mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
- DDR0_01_INT_MASK_ALL_OFF);
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Running denali_core_search_data_eye() when ECC is enabled
- * causes non-ECC machine checks. This clears them.
- */
- print_mcsr();
- mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
- print_mcsr();
-#endif
- sync();
- }
-#endif /* defined(CONFIG_DDR_ECC) */
-#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
-
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
- return dram_size;
-}
-
-void board_add_ram_info(int use_default)
-{
- u32 val;
-
- printf(" (ECC");
- if (!is_ecc_enabled()) {
- printf(" not");
- }
- printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
-
- mfsdram(DDR0_03, val);
- printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
-}
-#endif /* CONFIG_SPD_EEPROM */
+++ /dev/null
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2005-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements generic DRAM ECC initialization for
- * PowerPC processors using a SDRAM DDR/DDR2 controller,
- * including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
- * 460EX/GT.
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
- defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
-
-#if defined(CONFIG_405EX)
-/*
- * Currently only 405EX uses 16bit data bus width as an alternative
- * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
- */
-#define SDRAM_DATA_ALT_WIDTH 2
-#else
-#define SDRAM_DATA_ALT_WIDTH 8
-#endif
-
-static void wait_ddr_idle(void)
-{
- u32 val;
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
-}
-
-static void program_ecc_addr(unsigned long start_address,
- unsigned long num_bytes,
- unsigned long tlb_word2_i_value)
-{
- unsigned long current_address;
- unsigned long end_address;
- unsigned long address_increment;
- unsigned long mcopt1;
- char str[] = "ECC generation -";
- char slash[] = "\\|/-\\|/-";
- int loop = 0;
- int loopi = 0;
-
- current_address = start_address;
- mfsdram(SDRAM_MCOPT1, mcopt1);
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
- sync();
- eieio();
- wait_ddr_idle();
-
- puts(str);
-
-#ifdef CONFIG_440
- if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
-#endif
- /* ECC bit set method for non-cached memory */
- if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
- address_increment = 4;
- else
- address_increment = SDRAM_DATA_ALT_WIDTH;
- end_address = current_address + num_bytes;
-
- while (current_address < end_address) {
- *((unsigned long *)current_address) = 0;
- current_address += address_increment;
-
- if ((loop++ % (2 << 20)) == 0) {
- putc('\b');
- putc(slash[loopi++ % 8]);
- }
- }
-#ifdef CONFIG_440
- } else {
- /* ECC bit set method for cached memory */
- dcbz_area(start_address, num_bytes);
- /* Write modified dcache lines back to memory */
- clean_dcache_range(start_address, start_address + num_bytes);
- }
-#endif /* CONFIG_440 */
-
- blank_string(strlen(str));
-
- sync();
- eieio();
- wait_ddr_idle();
-
- /* clear ECC error repoting registers */
- mtsdram(SDRAM_ECCES, 0xffffffff);
- mtdcr(0x4c, 0xffffffff);
-
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
- sync();
- eieio();
- wait_ddr_idle();
- }
-}
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-void ecc_init(unsigned long * const start, unsigned long size)
-{
- /*
- * Init ECC with cache disabled (on PPC's with IBM DDR
- * controller (non DDR2), not tested with cache enabled yet
- */
- program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
-}
-#endif
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-void do_program_ecc(unsigned long tlb_word2_i_value)
-{
- unsigned long mcopt1;
- unsigned long mcopt2;
- unsigned long mcstat;
- phys_size_t memsize = sdram_memsize();
-
- if (memsize > CONFIG_MAX_MEM_MAPPED) {
- printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
- return;
- }
-
- mfsdram(SDRAM_MCOPT1, mcopt1);
- mfsdram(SDRAM_MCOPT2, mcopt2);
-
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- /* DDR controller must be enabled and not in self-refresh. */
- mfsdram(SDRAM_MCSTAT, mcstat);
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
-
- program_ecc_addr(0, memsize, tlb_word2_i_value);
- }
- }
-}
-#endif
-
-#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
-#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
+++ /dev/null
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * Copyright (c) 2007-2009 DENX Software Engineering, GmbH
- * Stefan Roese <sr@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements ECC initialization for PowerPC processors
- * using the IBM SDRAM DDR1 & DDR2 controller.
- *
- */
-
-#ifndef _ECC_H_
-#define _ECC_H_
-
-/*
- * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
- * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
- * we need to make some processor dependant defines used later on by the
- * driver.
- */
-
-/* For 440GP/GX/EP/GR */
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-#define SDRAM_MCOPT1 SDRAM_CFG0
-#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK
-#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON
-#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN
-#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK
-#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32
-
-#define SDRAM_MCSTAT SDRAM0_MCSTS
-#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS
-#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT
-
-#define SDRAM_ECCES SDRAM0_ECCESR
-#endif
-
-void ecc_init(unsigned long * const start, unsigned long size);
-void do_program_ecc(unsigned long tlb_word2_i_value);
-
-static void inline blank_string(int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- putc('\b');
- for (i = 0; i < size; i++)
- putc(' ');
- for (i = 0; i < size; i++)
- putc('\b');
-}
-
-#endif /* _ECC_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#include <asm/4xx_pcie.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void __ft_board_setup(void *blob, bd_t *bd)
-{
- int rc;
- int i;
- u32 bxcr;
- u32 ranges[EBC_NUM_BANKS * 4];
- u32 *p = ranges;
- char ebc_path[] = "/plb/opb/ebc";
-
- ft_cpu_setup(blob, bd);
-
- /*
- * Read 4xx EBC bus bridge registers to get mappings of the
- * peripheral banks into the OPB/PLB address space
- */
- for (i = 0; i < EBC_NUM_BANKS; i++) {
- mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
- bxcr = mfdcr(EBC0_CFGDATA);
-
- if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
- *p++ = i;
- *p++ = 0;
- *p++ = bxcr & EBC_BXCR_BAS_MASK;
- *p++ = EBC_BXCR_BANK_SIZE(bxcr);
-
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Try to update reg property in nor flash node too */
- fdt_fixup_nor_flash_size(blob, i,
- EBC_BXCR_BANK_SIZE(bxcr));
-#endif
- }
- }
-
- /* Some 405 PPC's have EBC as direct PLB child in the dts */
- if (fdt_path_offset(blob, ebc_path) < 0)
- strcpy(ebc_path, "/plb/ebc");
- rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
- (p - ranges) * sizeof(u32), 1);
- if (rc) {
- printf("Unable to update property EBC mappings, err=%s\n",
- fdt_strerror(rc));
- }
-}
-void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
-
-/*
- * Fixup all PCIe nodes by setting the device_type property
- * to "pci-endpoint" instead is "pci" for endpoint ports.
- * This property will get checked later by the Linux driver
- * to properly configure the PCIe port in Linux (again).
- */
-void fdt_pcie_setup(void *blob)
-{
- const char *compat = "ibm,plb-pciex";
- const char *prop = "device_type";
- const char *prop_val = "pci-endpoint";
- const u32 *port;
- int no;
- int rc;
-
- /* Search first PCIe node */
- no = fdt_node_offset_by_compatible(blob, -1, compat);
- while (no != -FDT_ERR_NOTFOUND) {
- port = fdt_getprop(blob, no, "port", NULL);
- if (port == NULL) {
- printf("WARNING: could not find port property\n");
- } else {
- if (is_end_point(*port)) {
- rc = fdt_setprop(blob, no, prop, prop_val,
- strlen(prop_val) + 1);
- if (rc < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop, compat, fdt_strerror(rc));
- }
- }
-
- /* Jump to next PCIe node */
- no = fdt_node_offset_by_compatible(blob, no, compat);
- }
-}
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- sys_info_t sys_info;
- int off, ndepth = 0;
-
- get_sys_info(&sys_info);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
- do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
-
- if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
- do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
- else
- do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- /*
- * Fixup all UART clocks for CPU internal UARTs
- * (only these UARTs are definitely clocked by gd->uart_clk)
- *
- * These UARTs are direct childs of /plb/opb. This code
- * does not touch any UARTs that are connected to the ebc.
- */
- off = fdt_path_offset(blob, "/plb/opb");
- while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
- /*
- * process all sub nodes and stop when we are back
- * at the starting depth
- */
- if (ndepth <= 0)
- break;
-
- /* only update direct childs */
- if ((ndepth == 1) &&
- (fdt_node_check_compatible(blob, off, "ns16550") == 0))
- fdt_setprop(blob, off,
- "clock-frequency",
- (void*)&(gd->uart_clk), 4);
- }
-
- /*
- * Fixup all ethernet nodes
- * Note: aliases in the dts are required for this
- */
- fdt_fixup_ethernet(blob);
-
- /*
- * Fixup all available PCIe nodes by setting the device_type property
- */
- fdt_pcie_setup(blob);
-}
-#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
-#endif
-
-#if defined(GPIO0_OSRL)
-/* Only some 4xx variants support alternate funtions on the GPIO's */
-void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
-{
- u32 mask;
- u32 mask2;
- u32 val;
- u32 offs = 0;
- u32 offs2 = 0;
- int pin2 = pin << 1;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (pin >= GPIO_MAX/2) {
- offs2 = 0x4;
- pin2 = (pin - GPIO_MAX/2) << 1;
- }
-
- mask = 0x80000000 >> pin;
- mask2 = 0xc0000000 >> pin2;
-
- /* first set TCR to 0 */
- out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
-
- if (in_out == GPIO_OUT) {
- val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
- switch (gpio_alt) {
- case GPIO_ALT1:
- val |= GPIO_ALT1_SEL >> pin2;
- break;
- case GPIO_ALT2:
- val |= GPIO_ALT2_SEL >> pin2;
- break;
- case GPIO_ALT3:
- val |= GPIO_ALT3_SEL >> pin2;
- break;
- }
- out_be32((void *)GPIO0_OSRL + offs + offs2, val);
-
- /* setup requested output value */
- if (out_val == GPIO_OUT_0)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~mask);
- else if (out_val == GPIO_OUT_1)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | mask);
-
- /* now configure TCR to drive output if selected */
- out_be32((void *)GPIO0_TCR + offs,
- in_be32((void *)GPIO0_TCR + offs) | mask);
- } else {
- val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
- val |= GPIO_IN_SEL >> pin2;
- out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
- }
-}
-#endif /* GPIO_OSRL */
-
-void gpio_write_bit(int pin, int val)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (val)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
- else
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
-}
-
-int gpio_read_out_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-int gpio_read_in_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-void gpio_set_chip_configuration(void)
-{
- unsigned char i=0, j=0, offs=0, gpio_core;
- unsigned long reg, core_add;
-
- for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
- j = 0;
- offs = 0;
- /* GPIO config of the GPIOs 0 to 31 */
- for (i=0; i<GPIO_MAX; i++, j++) {
- if (i == GPIO_MAX/2) {
- offs = 4;
- j = i-16;
- }
-
- core_add = gpio_tab[gpio_core][i].add;
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- break;
-
- case GPIO_ALT1:
- reg = in_be32((void *)GPIO_IS1(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS1(core_add+offs), reg);
- break;
-
- case GPIO_ALT2:
- reg = in_be32((void *)GPIO_IS2(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS2(core_add+offs), reg);
- break;
-
- case GPIO_ALT3:
- reg = in_be32((void *)GPIO_IS3(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS3(core_add+offs), reg);
- break;
- }
- }
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- u32 gpio_alt_sel = 0;
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- /*
- * Setup output value
- * 1 -> high level
- * 0 -> low level
- * else -> don't touch
- */
- reg = in_be32((void *)GPIO_OR(core_add));
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
- reg |= (0x80000000 >> (i));
- else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
- reg &= ~(0x80000000 >> (i));
- out_be32((void *)GPIO_OR(core_add), reg);
-
- reg = in_be32((void *)GPIO_TCR(core_add)) |
- (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
-
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- break;
-
- case GPIO_ALT1:
- gpio_alt_sel = GPIO_ALT1_SEL;
- break;
-
- case GPIO_ALT2:
- gpio_alt_sel = GPIO_ALT2_SEL;
- break;
-
- case GPIO_ALT3:
- gpio_alt_sel = GPIO_ALT3_SEL;
- break;
- }
-
- if (0 != gpio_alt_sel) {
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
-
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
- reg = in_be32((void *)GPIO_TCR(core_add))
- | (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- } else {
- reg = in_be32((void *)GPIO_TCR(core_add))
- & ~(0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- }
- }
- }
- }
- }
-}
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * CPM interrupt vector functions.
- */
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-static struct irq_action irq_vecs[IRQ_MAX];
-
-#if defined(CONFIG_440)
-
-/* SPRN changed in 440 */
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtspr 0x03f,%0" : : "r" (val));
-}
-
-#else /* !defined(CONFIG_440) */
-
-static __inline__ void set_pit(unsigned long val)
-{
- asm volatile("mtpit %0" : : "r" (val));
-}
-
-
-static __inline__ void set_tcr(unsigned long val)
-{
- asm volatile("mttcr %0" : : "r" (val));
-}
-
-
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtevpr %0" : : "r" (val));
-}
-#endif /* defined(CONFIG_440 */
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- int vec;
- unsigned long val;
-
- /* decrementer is automatically reloaded */
- *decrementer_count = 0;
-
- /*
- * Mark all irqs as free
- */
- for (vec = 0; vec < IRQ_MAX; vec++) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
-#ifdef CONFIG_4xx
- /*
- * Init PIT
- */
-#if defined(CONFIG_440)
- val = mfspr( SPRN_TCR );
- val &= (~0x04400000); /* clear DIS & ARE */
- mtspr( SPRN_TCR, val );
- mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
- mtspr( SPRN_DECAR, 0 ); /* clear reload */
- mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
- val = gd->bd->bi_intfreq/1000; /* 1 msec */
- mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
- mtspr( SPRN_DEC, val ); /* Set inital val */
-#else
- set_pit(gd->bd->bi_intfreq / 1000);
-#endif
-#endif /* CONFIG_4xx */
-
-#ifdef CONFIG_ADCIOP
- /*
- * Init PIT
- */
- set_pit(66000);
-#endif
-
- /*
- * Enable PIT
- */
- val = mfspr(SPRN_TCR);
- val |= 0x04400000;
- mtspr(SPRN_TCR, val);
-
- /*
- * Set EVPR to 0
- */
- set_evpr(0x00000000);
-
- /*
- * Call uic or xilinx_irq pic_enable
- */
- pic_enable();
-
- return (0);
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-void interrupt_run_handler(int vec)
-{
- irq_vecs[vec].count++;
-
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
- } else {
- pic_irq_disable(vec);
- printf("Masking bogus interrupt vector %d\n", vec);
- }
-
- pic_irq_ack(vec);
- return;
-}
-
-void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
-{
- /*
- * Print warning when replacing with a different irq vector
- */
- if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
- printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
- vec, (uint) handler, (uint) irq_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
-
- pic_irq_enable(vec);
- return;
-}
-
-void irq_free_handler(int vec)
-{
- debug("Free interrupt for vector %d ==> %p\n",
- vec, irq_vecs[vec].handler);
-
- pic_irq_disable(vec);
-
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("Interrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec = 0; vec < IRQ_MAX; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
-
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE 0x40000000
-
-#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
-#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
-#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
-#define spu_BRateDivh 0x10 /* Baud rate divisor high */
-#define spu_BRateDivl 0x14 /* Baud rate divisor low */
-#define spu_CtlReg 0x18 /* Control Register */
-#define spu_RxCmd 0x1c /* Rx Command Register */
-#define spu_TxCmd 0x20 /* Tx Command Register */
-#define spu_RxBuff 0x24 /* Rx data buffer */
-#define spu_TxBuff 0x24 /* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRport1 0x40000000
-#define asyncLSRport1set 0x40000004
-#define asyncLSRDataReady 0x80
-#define asyncLSRFramingError 0x40
-#define asyncLSROverrunError 0x20
-#define asyncLSRParityError 0x10
-#define asyncLSRBreakInterrupt 0x08
-#define asyncLSRTxHoldEmpty 0x04
-#define asyncLSRTxShiftEmpty 0x02
-
-/*-----------------------------------------------------------------------------+
- | Handshake Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncHSRport1 0x40000008
-#define asyncHSRport1set 0x4000000c
-#define asyncHSRDsr 0x80
-#define asyncLSRCts 0x40
-
-/*-----------------------------------------------------------------------------+
- | Control Register.
- +-----------------------------------------------------------------------------*/
-#define asyncCRport1 0x40000018
-#define asyncCRNormal 0x00
-#define asyncCRLoopback 0x40
-#define asyncCRAutoEcho 0x80
-#define asyncCRDtr 0x20
-#define asyncCRRts 0x10
-#define asyncCRWordLength7 0x00
-#define asyncCRWordLength8 0x08
-#define asyncCRParityDisable 0x00
-#define asyncCRParityEnable 0x04
-#define asyncCREvenParity 0x00
-#define asyncCROddParity 0x02
-#define asyncCRStopBitsOne 0x00
-#define asyncCRStopBitsTwo 0x01
-#define asyncCRDisableDtrRts 0x00
-
-/*-----------------------------------------------------------------------------+
- | Receiver Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncRCRport1 0x4000001c
-#define asyncRCRDisable 0x00
-#define asyncRCREnable 0x80
-#define asyncRCRIntDisable 0x00
-#define asyncRCRIntEnabled 0x20
-#define asyncRCRDMACh2 0x40
-#define asyncRCRDMACh3 0x60
-#define asyncRCRErrorInt 0x10
-#define asyncRCRPauseEnable 0x08
-
-/*-----------------------------------------------------------------------------+
- | Transmitter Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncTCRport1 0x40000020
-#define asyncTCRDisable 0x00
-#define asyncTCREnable 0x80
-#define asyncTCRIntDisable 0x00
-#define asyncTCRIntEnabled 0x20
-#define asyncTCRDMACh2 0x40
-#define asyncTCRDMACh3 0x60
-#define asyncTCRTxEmpty 0x10
-#define asyncTCRErrorInt 0x08
-#define asyncTCRStopPause 0x04
-#define asyncTCRBreakGen 0x02
-
-/*-----------------------------------------------------------------------------+
- | Miscellanies defines.
- +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1 0x40000024
-#define asyncRxBufferport1 0x40000024
-#define asyncDLABLsbport1 0x40000014
-#define asyncDLABMsbport1 0x40000010
-#define asyncXOFFchar 0x13
-#define asyncXONchar 0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-int serial_init (void)
-{
- volatile char val;
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- /*
- * Init onboard UART
- */
- out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
- out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
- out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
- out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
- out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
-
- return (0);
-}
-
-void serial_setbrg (void)
-{
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- out_8((u8 *)SPU_BASE + spu_BRateDivl,
- (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh,
- ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-void serial_putc (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- /* load status from handshake register */
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
-
- out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
-
- while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- }
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc ()
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- break;
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt );
- }
- }
- return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
-}
-
-int serial_tstc ()
-{
- unsigned char status;
-
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- return (1);
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt);
- }
- return 0;
-}
-
-#endif /* CONFIG_IOP480 */
+++ /dev/null
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <version.h>
-
-#define CONFIG_405GP 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- /* icache */
- iccci r0,r0 /* iccci invalidates the entire I cache */
- /* dcache */
- addi r6,0,0x0000 /* clear GPR 6 */
- addi r7,r0, 128 /* do loop for # of dcache lines */
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6, 32 /* bump to next line */
- bdnz ..dcloop
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- SYNC
- blr
-
-#endif
+++ /dev/null
-/*-----------------------------------------------------------------------------+
- | This source code is dual-licensed. You may use it under the terms of the
- | GNU General Public License version 2, or under the license below.
- |
- | This source code has been made available to you by IBM on an AS-IS
- | basis. Anyone receiving this source is licensed under IBM
- | copyrights to use it in any way he or she deems fit, including
- | copying it, modifying it, compiling it, and redistributing it either
- | with or without modifications. No license under IBM patents or
- | patent applications is to be implied by the copyright license.
- |
- | Any user of this software should understand that IBM cannot provide
- | technical support for this software and will not be responsible for
- | any consequences resulting from the use of this software.
- |
- | Any person who transfers this source code or any derivative work
- | must include the IBM copyright notice, this paragraph, and the
- | preceding two paragraphs in the transferred software.
- |
- | COPYRIGHT I B M CORPORATION 1995
- | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- +-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
- |
- | File Name: miiphy.c
- |
- | Function: This module has utilities for accessing the MII PHY through
- | the EMAC3 macro.
- |
- | Author: Mark Wisner
- |
- +-----------------------------------------------------------------------------*/
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <ppc4xx_enet.h>
-#include <405_mal.h>
-#include <miiphy.h>
-
-#if !defined(CONFIG_PHY_CLK_FREQ)
-#define CONFIG_PHY_CLK_FREQ 0
-#endif
-
-/***********************************************************/
-/* Dump out to the screen PHY regs */
-/***********************************************************/
-
-void miiphy_dump (char *devname, unsigned char addr)
-{
- unsigned long i;
- unsigned short data;
-
- for (i = 0; i < 0x1A; i++) {
- if (miiphy_read (devname, addr, i, &data)) {
- printf ("read error for reg %lx\n", i);
- return;
- }
- printf ("Phy reg %lx ==> %4x\n", i, data);
-
- /* jump to the next set of regs */
- if (i == 0x07)
- i = 0x0f;
-
- } /* end for loop */
-} /* end dump */
-
-/***********************************************************/
-/* (Re)start autonegotiation */
-/***********************************************************/
-int phy_setup_aneg (char *devname, unsigned char addr)
-{
- u16 bmcr;
-
-#if defined(CONFIG_PHY_DYNAMIC_ANEG)
- /*
- * Set up advertisement based on capablilities reported by the PHY.
- * This should work for both copper and fiber.
- */
- u16 bmsr;
-#if defined(CONFIG_PHY_GIGE)
- u16 exsr = 0x0000;
-#endif
-
- miiphy_read (devname, addr, PHY_BMSR, &bmsr);
-
-#if defined(CONFIG_PHY_GIGE)
- if (bmsr & PHY_BMSR_EXT_STAT)
- miiphy_read (devname, addr, PHY_EXSR, &exsr);
-
- if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
- /* 1000BASE-X */
- u16 anar = 0x0000;
-
- if (exsr & PHY_EXSR_1000XF)
- anar |= PHY_X_ANLPAR_FD;
-
- if (exsr & PHY_EXSR_1000XH)
- anar |= PHY_X_ANLPAR_HD;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
- } else
-#endif
- {
- u16 anar, btcr;
-
- miiphy_read (devname, addr, PHY_ANAR, &anar);
- anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
- btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
-
- if (bmsr & PHY_BMSR_100T4)
- anar |= PHY_ANLPAR_T4;
-
- if (bmsr & PHY_BMSR_100TXF)
- anar |= PHY_ANLPAR_TXFD;
-
- if (bmsr & PHY_BMSR_100TXH)
- anar |= PHY_ANLPAR_TX;
-
- if (bmsr & PHY_BMSR_10TF)
- anar |= PHY_ANLPAR_10FD;
-
- if (bmsr & PHY_BMSR_10TH)
- anar |= PHY_ANLPAR_10;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
-
-#if defined(CONFIG_PHY_GIGE)
- if (exsr & PHY_EXSR_1000TF)
- btcr |= PHY_1000BTCR_1000FD;
-
- if (exsr & PHY_EXSR_1000TH)
- btcr |= PHY_1000BTCR_1000HD;
-
- miiphy_write (devname, addr, PHY_1000BTCR, btcr);
-#endif
- }
-
-#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
- /*
- * Set up standard advertisement
- */
- u16 adv;
-
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD | PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &adv);
- adv |= (0x0300);
- miiphy_write (devname, addr, PHY_1000BTCR, adv);
-
-#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
-
- /* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &bmcr);
- bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, bmcr);
-
- return 0;
-}
-
-/***********************************************************/
-/* read a phy reg and return the value with a rc */
-/***********************************************************/
-/* AMCC_TODO:
- * Find out of the choice for the emac for MDIO is from the bridges,
- * i.e. ZMII or RGMII as approporiate. If the bridges are not used
- * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
- * used? If so, then this routine below does not apply to the 460EX/GT.
- *
- * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
- * return EMAC0 offset here
- * vg: For 460EX/460GT if internal GPCS PHY address is specified
- * return appropriate EMAC offset
- */
-unsigned int miiphy_getemac_offset(u8 addr)
-{
-#if (defined(CONFIG_440) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
- defined(CONFIG_NET_MULTI)
- unsigned long zmii;
- unsigned long eoffset;
-
- /* Need to find out which mdi port we're using */
- zmii = in_be32((void *)ZMII0_FER);
-
- if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
- /* using port 0 */
- eoffset = 0;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
- /* using port 1 */
- eoffset = 0x100;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
- /* using port 2 */
- eoffset = 0x400;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
- /* using port 3 */
- eoffset = 0x600;
-
- else {
- /* None of the mdi ports are enabled! */
- /* enable port 0 */
- zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
- out_be32((void *)ZMII0_FER, zmii);
- eoffset = 0;
- /* need to soft reset port 0 */
- zmii = in_be32((void *)EMAC0_MR0);
- zmii |= EMAC_MR0_SRST;
- out_be32((void *)EMAC0_MR0, zmii);
- }
-
- return (eoffset);
-#else
-
-#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
- unsigned long rgmii;
- int devnum = 1;
-
- rgmii = in_be32((void *)RGMII_FER);
- if (rgmii & (1 << (19 - devnum)))
- return 0x100;
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 eoffset = 0;
-
- switch (addr) {
-#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
- case CONFIG_GPCS_PHY1_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
- eoffset = 0x100;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
- case CONFIG_GPCS_PHY2_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
- eoffset = 0x300;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
- case CONFIG_GPCS_PHY3_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
- eoffset = 0x400;
- break;
-#endif
- default:
- eoffset = 0;
- break;
- }
- return eoffset;
-#endif
-
- return 0;
-#endif
-}
-
-static int emac_miiphy_wait(u32 emac_reg)
-{
- u32 sta_reg;
- int i;
-
- /* wait for completion */
- i = 0;
- do {
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- if (i++ > 5) {
- debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
- __LINE__, sta_reg);
- return -1;
- }
- udelay(10);
- } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
-
- return 0;
-}
-
-static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
-{
- u32 emac_reg;
- u32 sta_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- sta_reg = reg; /* reg address */
-
- /* set clock (50MHz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
-#else
- sta_reg |= cmd;
-#endif
-#else
- sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
- /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
- sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
- sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
- if (cmd == EMAC_STACR_WRITE)
- memcpy(&sta_reg, &value, 2); /* put in data */
-
- out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
-
- return 0;
-}
-
-int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
-{
- unsigned long sta_reg;
- unsigned long emac_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
- return -1;
-
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- *value = sta_reg >> 16;
-
- return 0;
-}
-
-/***********************************************************/
-/* write a phy reg and return the value with a rc */
-/***********************************************************/
-
-int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
- unsigned short value)
-{
- return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
-}
+++ /dev/null
-/*
- *(C) Copyright 2005-2009 Netstal Maschinen AG
- * Bruno Hars (Bruno.Hars@netstal.com)
- * Niklaus Giger (Niklaus.Giger@netstal.com)
- *
- * This source code is free software; you can redistribute it
- * and/or modify it in source code form under the terms of the GNU
- * General Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-/*
- * reginfo.c - register dump of HW-configuratin register for PPC4xx based board
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-uic.h>
-#include <ppc4xx_enet.h>
-
-enum REGISTER_TYPE {
- IDCR1, /* Indirectly Accessed DCR via SDRAM0_CFGADDR/SDRAM0_CFGDATA */
- IDCR2, /* Indirectly Accessed DCR via EBC0_CFGADDR/EBC0_CFGDATA */
- IDCR3, /* Indirectly Accessed DCR via EBM0_CFGADDR/EBM0_CFGDATA */
- IDCR4, /* Indirectly Accessed DCR via PPM0_CFGADDR/PPM0_CFGDATA */
- IDCR5, /* Indirectly Accessed DCR via CPR0_CFGADDR/CPR0_CFGDATA */
- IDCR6, /* Indirectly Accessed DCR via SDR0_CFGADDR/SDR0_CFGDATA */
- MM /* Directly Accessed MMIO Register */
-};
-
-struct cpu_register {
- char *name;
- enum REGISTER_TYPE type;
- u32 address;
-};
-
-/*
- * PPC440EPx registers ordered for output
- * name type addr size
- * -------------------------------------------
- */
-
-const struct cpu_register ppc4xx_reg[] = {
- {"PB0CR", IDCR2, PB0CR},
- {"PB0AP", IDCR2, PB0AP},
- {"PB1CR", IDCR2, PB1CR},
- {"PB1AP", IDCR2, PB1AP},
- {"PB2CR", IDCR2, PB2CR},
- {"PB2AP", IDCR2, PB2AP},
- {"PB3CR", IDCR2, PB3CR},
- {"PB3AP", IDCR2, PB3AP},
-
- {"PB4CR", IDCR2, PB4CR},
- {"PB4AP", IDCR2, PB4AP},
-#if !defined(CONFIG_405EP)
- {"PB5CR", IDCR2, PB5CR},
- {"PB5AP", IDCR2, PB5AP},
- {"PB6CR", IDCR2, PB6CR},
- {"PB6AP", IDCR2, PB6AP},
- {"PB7CR", IDCR2, PB7CR},
- {"PB7AP", IDCR2, PB7AP},
-#endif
-
- {"PBEAR", IDCR2, PBEAR},
-#if defined(CONFIG_405EP) || defined (CONFIG_405GP)
- {"PBESR0", IDCR2, PBESR0},
- {"PBESR1", IDCR2, PBESR1},
-#endif
- {"EBC0_CFG", IDCR2, EBC0_CFG},
-
-#ifdef CONFIG_405GP
- {"SDRAM0_BESR0", IDCR1, SDRAM0_BESR0},
- {"SDRAM0_BESRS0", IDCR1, SDRAM0_BESRS0},
- {"SDRAM0_BESR1", IDCR1, SDRAM0_BESR1},
- {"SDRAM0_BESRS1", IDCR1, SDRAM0_BESRS1},
- {"SDRAM0_BEAR", IDCR1, SDRAM0_BEAR},
- {"SDRAM0_CFG", IDCR1, SDRAM0_CFG},
- {"SDRAM0_RTR", IDCR1, SDRAM0_RTR},
- {"SDRAM0_PMIT", IDCR1, SDRAM0_PMIT},
-
- {"SDRAM0_B0CR", IDCR1, SDRAM0_B0CR},
- {"SDRAM0_B1CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_B2CR", IDCR1, SDRAM0_B2CR},
- {"SDRAM0_B3CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_TR", IDCR1, SDRAM0_TR},
- {"SDRAM0_ECCCFG", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_ECCESR", IDCR1, SDRAM0_ECCESR},
-
-
-#endif
-
-#ifdef CONFIG_440EPX
- {"SDR0_SDSTP0", IDCR6, SDR0_SDSTP0},
- {"SDR0_SDSTP1", IDCR6, SDR0_SDSTP1},
- {"SDR0_SDSTP2", IDCR6, SDR0_SDSTP2},
- {"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
- {"SDR0_CUST0", IDCR6, SDR0_CUST0},
- {"SDR0_CUST1", IDCR6, SDR0_CUST1},
- {"SDR0_EBC0", IDCR6, SDR0_EBC0},
- {"SDR0_AMP0", IDCR6, SD0_AMP0},
- {"SDR0_AMP1", IDCR6, SD0_AMP1},
- {"SDR0_CP440", IDCR6, SDR0_CP440},
- {"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
- {"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
- {"SDR0_EMAC0RXST", IDCR6, SDR0_EMAC0RXST},
- {"SDR0_EMAC0TXST", IDCR6, SDR0_EMAC0TXST},
- {"SDR0_MFR", IDCR6, SDR0_MFR},
- {"SDR0_PCI0", IDCR6, SDR0_PCI0},
- {"SDR0_PFC0", IDCR6, SDR0_PFC0},
- {"SDR0_PFC1", IDCR6, SDR0_PFC1},
- {"SDR0_PFC2", IDCR6, SDR0_PFC2},
- {"SDR0_PFC4", IDCR6, SDR0_PFC4},
- {"SDR0_UART0", IDCR6, SDR0_UART0},
- {"SDR0_UART1", IDCR6, SDR0_UART1},
- {"SDR0_UART2", IDCR6, SDR0_UART2},
- {"SDR0_UART3", IDCR6, SDR0_UART3},
- {"DDR0_02", IDCR1, DDR0_02},
- {"DDR0_00", IDCR1, DDR0_00},
- {"DDR0_01", IDCR1, DDR0_01},
- {"DDR0_03", IDCR1, DDR0_03},
- {"DDR0_04", IDCR1, DDR0_04},
- {"DDR0_05", IDCR1, DDR0_05},
- {"DDR0_06", IDCR1, DDR0_06},
- {"DDR0_07", IDCR1, DDR0_07},
- {"DDR0_08", IDCR1, DDR0_08},
- {"DDR0_09", IDCR1, DDR0_09},
- {"DDR0_10", IDCR1, DDR0_10},
- {"DDR0_11", IDCR1, DDR0_11},
- {"DDR0_12", IDCR1, DDR0_12},
- {"DDR0_14", IDCR1, DDR0_14},
- {"DDR0_17", IDCR1, DDR0_17},
- {"DDR0_18", IDCR1, DDR0_18},
- {"DDR0_19", IDCR1, DDR0_19},
- {"DDR0_20", IDCR1, DDR0_20},
- {"DDR0_21", IDCR1, DDR0_21},
- {"DDR0_22", IDCR1, DDR0_22},
- {"DDR0_23", IDCR1, DDR0_23},
- {"DDR0_24", IDCR1, DDR0_24},
- {"DDR0_25", IDCR1, DDR0_25},
- {"DDR0_26", IDCR1, DDR0_26},
- {"DDR0_27", IDCR1, DDR0_27},
- {"DDR0_28", IDCR1, DDR0_28},
- {"DDR0_31", IDCR1, DDR0_31},
- {"DDR0_32", IDCR1, DDR0_32},
- {"DDR0_33", IDCR1, DDR0_33},
- {"DDR0_34", IDCR1, DDR0_34},
- {"DDR0_35", IDCR1, DDR0_35},
- {"DDR0_36", IDCR1, DDR0_36},
- {"DDR0_37", IDCR1, DDR0_37},
- {"DDR0_38", IDCR1, DDR0_38},
- {"DDR0_39", IDCR1, DDR0_39},
- {"DDR0_40", IDCR1, DDR0_40},
- {"DDR0_41", IDCR1, DDR0_41},
- {"DDR0_42", IDCR1, DDR0_42},
- {"DDR0_43", IDCR1, DDR0_43},
- {"DDR0_44", IDCR1, DDR0_44},
- {"CPR0_ICFG", IDCR5, CPR0_ICFG},
- {"CPR0_MALD", IDCR5, CPR0_MALD},
- {"CPR0_OPBD00", IDCR5, CPR0_OPBD0},
- {"CPR0_PERD0", IDCR5, CPR0_PERD},
- {"CPR0_PLLC0", IDCR5, CPR0_PLLC},
- {"CPR0_PLLD0", IDCR5, CPR0_PLLD},
- {"CPR0_PRIMAD0", IDCR5, CPR0_PRIMAD0},
- {"CPR0_PRIMBD0", IDCR5, CPR0_PRIMBD0},
- {"CPR0_SPCID", IDCR5, CPR0_SPCID},
- {"SPI0_MODE", MM, SPI0_MODE},
- {"IIC0_CLKDIV", MM, PCIL0_PMM1MA},
- {"PCIL0_PMM0MA", MM, PCIL0_PMM0MA},
- {"PCIL0_PMM1MA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1MS", MM, PCIL0_PTM1MS},
- {"PCIL0_PTM2LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM2MS", MM, PCIL0_PTM2MS},
- {"ZMII0_FER", MM, ZMII0_FER},
- {"ZMII0_SSR", MM, ZMII0_SSR},
- {"EMAC0_IPGVR", MM, EMAC0_IPGVR},
- {"EMAC0_MR1", MM, EMAC0_MR1},
- {"EMAC0_PTR", MM, EMAC0_PTR},
- {"EMAC0_RWMR", MM, EMAC0_RWMR},
- {"EMAC0_STACR", MM, EMAC0_STACR},
- {"EMAC0_TMR0", MM, EMAC0_TMR0},
- {"EMAC0_TMR1", MM, EMAC0_TMR1},
- {"EMAC0_TRTR", MM, EMAC0_TRTR},
- {"EMAC1_MR1", MM, EMAC1_MR1},
- {"GPIO0_OR", MM, GPIO0_OR},
- {"GPIO1_OR", MM, GPIO1_OR},
- {"GPIO0_TCR", MM, GPIO0_TCR},
- {"GPIO1_TCR", MM, GPIO1_TCR},
- {"GPIO0_ODR", MM, GPIO0_ODR},
- {"GPIO1_ODR", MM, GPIO1_ODR},
- {"GPIO0_OSRL", MM, GPIO0_OSRL},
- {"GPIO0_OSRH", MM, GPIO0_OSRH},
- {"GPIO1_OSRL", MM, GPIO1_OSRL},
- {"GPIO1_OSRH", MM, GPIO1_OSRH},
- {"GPIO0_TSRL", MM, GPIO0_TSRL},
- {"GPIO0_TSRH", MM, GPIO0_TSRH},
- {"GPIO1_TSRL", MM, GPIO1_TSRL},
- {"GPIO1_TSRH", MM, GPIO1_TSRH},
- {"GPIO0_IR", MM, GPIO0_IR},
- {"GPIO1_IR", MM, GPIO1_IR},
- {"GPIO0_ISR1L", MM, GPIO0_ISR1L},
- {"GPIO0_ISR1H", MM, GPIO0_ISR1H},
- {"GPIO1_ISR1L", MM, GPIO1_ISR1L},
- {"GPIO1_ISR1H", MM, GPIO1_ISR1H},
- {"GPIO0_ISR2L", MM, GPIO0_ISR2L},
- {"GPIO0_ISR2H", MM, GPIO0_ISR2H},
- {"GPIO1_ISR2L", MM, GPIO1_ISR2L},
- {"GPIO1_ISR2H", MM, GPIO1_ISR2H},
- {"GPIO0_ISR3L", MM, GPIO0_ISR3L},
- {"GPIO0_ISR3H", MM, GPIO0_ISR3H},
- {"GPIO1_ISR3L", MM, GPIO1_ISR3L},
- {"GPIO1_ISR3H", MM, GPIO1_ISR3H},
- {"SDR0_USB2PHY0CR", IDCR6, SDR0_USB2PHY0CR},
- {"SDR0_USB2H0CR", IDCR6, SDR0_USB2H0CR},
- {"SDR0_USB2D0CR", IDCR6, SDR0_USB2D0CR},
-#endif
-};
-
-/*
- * CPU Register dump of PPC4xx HW configuration registers
- * Output: first all DCR-registers, then in order of struct ppc4xx_reg
- */
-#define PRINT_DCR(dcr) printf("0x%08x %-16s: 0x%08x\n", dcr,#dcr, mfdcr(dcr));
-
-void ppc4xx_reginfo(void)
-{
- unsigned int i;
- unsigned int n;
- u32 value;
- enum REGISTER_TYPE type;
-#if defined (CONFIG_405EP)
- printf("Dump PPC405EP HW configuration registers\n\n");
-#elif CONFIG_405GP
- printf ("Dump 405GP HW configuration registers\n\n");
-#elif CONFIG_440EPX
- printf("Dump PPC440EPx HW configuration registers\n\n");
-#endif
- printf("MSR: 0x%08x\n", mfmsr());
-
- printf ("\nUniversal Interrupt Controller Regs\n");
- PRINT_DCR(UIC0SR);
- PRINT_DCR(UIC0ER);
- PRINT_DCR(UIC0CR);
- PRINT_DCR(UIC0PR);
- PRINT_DCR(UIC0TR);
- PRINT_DCR(UIC0MSR);
- PRINT_DCR(UIC0VR);
- PRINT_DCR(UIC0VCR);
-
-#if (UIC_MAX > 1)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 2)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 3)
- PRINT_DCR(UIC3SR);
- PRINT_DCR(UIC3ER);
- PRINT_DCR(UIC3CR);
- PRINT_DCR(UIC3PR);
- PRINT_DCR(UIC3TR);
- PRINT_DCR(UIC3MSR);
- PRINT_DCR(UIC3VR);
- PRINT_DCR(UIC3VCR);
-#endif
-
-#if defined (CONFIG_405EP) || defined (CONFIG_405GP)
- printf ("\n\nDMA Channels\n");
- PRINT_DCR(DMASR);
- PRINT_DCR(DMASGC);
- PRINT_DCR(DMAADR);
-
- PRINT_DCR(DMACR0);
- PRINT_DCR(DMACT0);
- PRINT_DCR(DMADA0);
- PRINT_DCR(DMASA0);
- PRINT_DCR(DMASB0);
-
- PRINT_DCR(DMACR1);
- PRINT_DCR(DMACT1);
- PRINT_DCR(DMADA1);
- PRINT_DCR(DMASA1);
- PRINT_DCR(DMASB1);
-
- PRINT_DCR(DMACR2);
- PRINT_DCR(DMACT2);
- PRINT_DCR(DMADA2);
- PRINT_DCR(DMASA2);
- PRINT_DCR(DMASB2);
-
- PRINT_DCR(DMACR3);
- PRINT_DCR(DMACT3);
- PRINT_DCR(DMADA3);
- PRINT_DCR(DMASA3);
- PRINT_DCR(DMASB3);
-#endif
-
- printf ("\n\nVarious HW-Configuration registers\n");
-#if defined (CONFIG_440EPX)
- PRINT_DCR(MAL0_CFG);
- PRINT_DCR(CPM0_ER);
- PRINT_DCR(CPM1_ER);
- PRINT_DCR(PLB4A0_ACR);
- PRINT_DCR(PLB4A1_ACR);
- PRINT_DCR(PLB3A0_ACR);
- PRINT_DCR(OPB2PLB40_BCTRL);
- PRINT_DCR(P4P3BO0_CFG);
-#endif
- n = sizeof(ppc4xx_reg) / sizeof(ppc4xx_reg[0]);
- for (i = 0; i < n; i++) {
- value = 0;
- type = ppc4xx_reg[i].type;
- switch (type) {
- case IDCR1: /* Indirect via SDRAM0_CFGADDR/DDR0_CFGDATA */
- mtdcr(SDRAM0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDRAM0_CFGDATA);
- break;
- case IDCR2: /* Indirect via EBC0_CFGADDR/EBC0_CFGDATA */
- mtdcr(EBC0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(EBC0_CFGDATA);
- break;
- case IDCR5: /* Indirect via CPR0_CFGADDR/CPR0_CFGDATA */
- mtdcr(CPR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(CPR0_CFGDATA);
- break;
- case IDCR6: /* Indirect via SDR0_CFGADDR/SDR0_CFGDATA */
- mtdcr(SDR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDR0_CFGDATA);
- break;
- case MM: /* Directly Accessed MMIO Register */
- value = in_be32((const volatile unsigned __iomem *)
- ppc4xx_reg[i].address);
- break;
- default:
- printf("\nERROR: struct entry %d: unknown register"
- "type\n", i);
- break;
- }
- printf("0x%08x %-16s: 0x%08x\n",ppc4xx_reg[i].address,
- ppc4xx_reg[i].name, value);
- }
-}
+++ /dev/null
-/* Copyright MontaVista Software Incorporated, 2000 */
-#include <config.h>
- .section .resetvec,"ax"
-#if defined(CONFIG_440)
- b _start_440
-#else
-#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
- b _start_pci
-#else
- b _start
-#endif
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * (C) Copyright 2002-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include "sdram.h"
-#include "ecc.h"
-
-#ifdef CONFIG_SDRAM_BANK0
-
-#ifndef CONFIG_440
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
- {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
- {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
- {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
- {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#ifdef CONFIG_SYS_SDRAM_CASL
-static ulong ns2clks(ulong ns)
-{
- ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
-
- return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
-}
-#endif /* CONFIG_SYS_SDRAM_CASL */
-
-static ulong compute_sdtr1(ulong speed)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
- ulong sdtr1 = 0;
-
- /* CASL */
- if (CONFIG_SYS_SDRAM_CASL < 2)
- sdtr1 |= (1 << SDRAM0_TR_CASL);
- else
- if (CONFIG_SYS_SDRAM_CASL > 4)
- sdtr1 |= (3 << SDRAM0_TR_CASL);
- else
- sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
-
- /* PTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
-
- /* CTP */
- tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
-
- /* LDF */
- tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
- else
- sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
-
- /* RFTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
- if ((tmp >= 4) && (tmp <= 10))
- sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
- else
- sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
-
- /* RCD */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
-
- return sdtr1;
-#else /* CONFIG_SYS_SDRAM_CASL */
- /*
- * If no values are configured in the board config file
- * use the default values, which seem to be ok for most
- * boards.
- *
- * REMARK:
- * For new board ports we strongly recommend to define the
- * correct values for the used SDRAM chips in your board
- * config file (see PPChameleonEVB.h)
- */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x01074015;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x0086400d;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/* refresh is expressed in ms */
-static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
-
- tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
- tmp /= 1000000;
-
- return ((tmp & 0x00003FF8) << 16);
-#else /* CONFIG_SYS_SDRAM_CASL */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x07f00000;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x05f00000;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/*
- * Autodetect onboard SDRAM on 405 platforms
- */
-phys_size_t initdram(int board_type)
-{
- ulong speed;
- ulong sdtr1;
- int i;
-
- /*
- * Determine SDRAM speed
- */
- speed = get_bus_freq(0); /* parameter not used on ppc4xx */
-
- /*
- * sdtr1 (register SDRAM0_TR) must take into account timings listed
- * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
- * account actual SDRAM size. So we can set up sdtr1 according to what
- * is specified in board configuration file while rtr dependds on SDRAM
- * size we are assuming before detection.
- */
- sdtr1 = compute_sdtr1(speed);
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG, 0x00000000);
-
- /*
- * Set MB0CF for bank 0.
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR, sdtr1);
- mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
-
- udelay(200);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram(SDRAM0_CFG, 0x80800000);
-
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG, 0x00000000);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG, 0x80800000);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
- mb0cf[i].size) {
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG, 0);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0;
-}
-
-#else /* CONFIG_440 */
-
-/*
- * Define some default values. Those can be overwritten in the
- * board config file.
- */
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
- {(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
- {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_TR0
-#define CONFIG_SYS_SDRAM0_TR0 0x41094012
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_WDDCTR
-#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_RTR
-#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_CFG0
-#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-static void sdram_tr1_set(int ram_address, int* tr1_value)
-{
- int i;
- int j, k;
- volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
- int first_good = -1, last_bad = 0x1ff;
-
- unsigned long test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- /* go through all possible SDRAM0_TR1[RDCT] values */
- for (i=0; i<=0x1ff; i++) {
- /* set the current value for TR1 */
- mtsdram(SDRAM0_TR1, (0x80800800 | i));
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* we have a SDRAM0_TR1[RDCT] that is part of the window */
- if (j == NUM_TRIES) {
- if (first_good == -1)
- first_good = i; /* found beginning of window */
- } else { /* bad read */
- /* if we have not had a good read then don't care */
- if (first_good != -1) {
- /* first failure after a good read */
- last_bad = i-1;
- break;
- }
- }
- }
-
- /* return the current value for TR1 */
- *tr1_value = (first_good + last_bad) / 2;
-}
-
-/*
- * Autodetect onboard DDR SDRAM on 440 platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-phys_size_t initdram(int board_type)
-{
- int i;
- int tr1_bank1;
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG0, 0x00000000);
-
- /*
- * Setup some default
- */
- mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
- mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
- mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
- mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
- mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
- udelay(400); /* Delay 200 usecs (min) */
-
- /*
- * Enable the controller, then wait for DCEN to complete
- */
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
- /*
- * Optimize TR1 to current hardware environment
- */
- sdram_tr1_set(0x00000000, &tr1_bank1);
- mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
-
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
- != mb0cf[i].size) {
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
-#ifdef CONFIG_SDRAM_ECC
- ecc_init(0, size);
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0; /* nothing found ! */
-}
-
-#endif /* CONFIG_440 */
-
-#endif /* CONFIG_SDRAM_BANK0 */
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SDRAM_H_
-#define _SDRAM_H_
-
-#include <config.h>
-
-#define ONE_BILLION 1000000000
-
-struct sdram_conf_s {
- unsigned long size;
- int rows;
- unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-/* Bitfields offsets */
-#define SDRAM0_TR_CASL (31 - 8)
-#define SDRAM0_TR_PTA (31 - 13)
-#define SDRAM0_TR_CTP (31 - 15)
-#define SDRAM0_TR_LDF (31 - 17)
-#define SDRAM0_TR_RFTA (31 - 29)
-#define SDRAM0_TR_RCD (31 - 31)
-
-#ifdef CONFIG_SYS_SDRAM_CL
-/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
-#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
-#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
-#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
-#define CONFIG_SYS_SDRAM_LDF 0
-#ifdef CONFIG_SYS_SDRAM_tRFC
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
-#else
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
-#endif
-#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
-#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
-
-/*
- * Some defines for the 440 DDR controller
- */
-#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
-#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ONE_BILLION 1000000000
-#ifdef DEBUG
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
-
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- uint pvr = get_pvr();
- unsigned long psr;
- unsigned long m;
-
- /*
- * Read PLL Mode register
- */
- pllmr = mfdcr (CPC0_PLLMR);
-
- /*
- * Read Pin Strapping register
- */
- psr = mfdcr (CPC0_PSR);
-
- /*
- * Determine FWD_DIV.
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
- if (sysInfo->pllFbkDiv == 0) {
- sysInfo->pllFbkDiv = 16;
- }
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
-
- /*
- * Check if PPC405GPr used (mask minor revision field)
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- /*
- * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
- */
- sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
-
- /*
- * Determine factor m depending on PLL feedback clock source
- */
- if (!(psr & PSR_PCI_ASYNC_EN)) {
- if (psr & PSR_NEW_MODE_EN) {
- /*
- * sync pci clock used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
- } else {
- /*
- * sync pci clock used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
- }
- } else if (psr & PSR_NEW_MODE_EN) {
- if (psr & PSR_PERCLK_SYNC_MODE_EN) {
- /*
- * PerClk used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
- } else {
- /*
- * CPU clock used as feedback (new mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
- }
- } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
- /*
- * PerClk used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
- } else {
- /*
- * PLB clock used as feedback (legacy mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
- }
-
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
- sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
- } else {
- /*
- * Check pllFwdDiv to see if running in bypass mode where the CPU speed
- * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
- * to make sure it is within the proper range.
- * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
- * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
- */
- if (sysInfo->pllFwdDiv == 1) {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
- sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
- } else {
- sysInfo->freqVCOHz = ( 1000000000000LL *
- (unsigned long long)sysInfo->pllFwdDiv *
- (unsigned long long)sysInfo->pllFbkDiv *
- (unsigned long long)sysInfo->pllPlbDiv
- ) / (unsigned long long)sysClkPeriodPs;
- sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- }
- }
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqProcessor;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-
-#elif defined(CONFIG_440)
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-static u8 pll_fwdv_multi_bits[] = {
- /* values for: 1 - 16 */
- 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
- 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
-};
-
-u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
- if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-static u8 pll_fbdv_multi_bits[] = {
- /* values for: 1 - 100 */
- 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
- 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
- 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
- 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
- 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
- 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
- 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
- 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
- /* values for: 101 - 200 */
- 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
- 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
- 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
- 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
- 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
- 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
- 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
- 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
- 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
- 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
- /* values for: 201 - 255 */
- 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
- 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
- 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
- 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
- 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
- 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
-};
-
-u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
- if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-/*
- * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
- * with latest EAS
- */
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long m;
- unsigned long plbedv0;
-
- /* Extract configured divisors */
- mfsdr(SDR0_SDSTP0, strp0);
- mfsdr(SDR0_SDSTP1, strp1);
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
- sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
- sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
- sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
-
- temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
- temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
-
- temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
- plbedv0 = temp ? temp: 8;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) {
- /* PLL internal feedback */
- m = sysInfo->pllFbkDiv;
- } else {
- /* PLL PerClk feedback */
- m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
- sysInfo->pllExtBusDiv;
- }
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- return;
-}
-
-#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void get_sys_info (sys_info_t *sysInfo)
-{
- unsigned long temp;
- unsigned long reg;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
- /*
- WARNING: ASSUMES the following:
- ENG=1
- PRADV0=1
- PRBDV0=1
- */
-
- /* Decode CPR0_PLLD0 for divisors */
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- sysInfo->pllFwdDivA = temp ? temp : 16;
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- lfdiv = reg & PLLD_LFBDV_MASK;
-
- mfcpr(CPR0_OPBD0, reg);
- temp = (reg & OPBDDV_MASK) >> 24;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- mfcpr(CPR0_PERD, reg);
- temp = (reg & PERDV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 8;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & SPCID_MASK) >> 24;
- sysInfo->pllPciDiv = temp ? temp : 4;
-
- /* Calculate 'M' based on feedback source */
- mfsdr(SDR0_SDSTP0, reg);
- temp = (reg & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- mfcpr(CPR0_PLLC, reg);
- temp = (reg & PLLC_SRC_MASK) >> 29;
- if (!temp) /* PLLOUTA */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else /* PLLOUTB */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
- sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- /* Figure which timer source to use */
- if (mfspr(SPRN_CCR1) & 0x0080) {
- /* External Clock, assume same as SYS_CLK */
- temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
- if (CONFIG_SYS_CLK_FREQ > temp)
- sysInfo->freqTmrClk = temp;
- else
- sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
- }
- else /* Internal clock */
- sysInfo->freqTmrClk = sysInfo->freqProcessor;
-}
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- sys_info_t sys_info;
- get_sys_info (&sys_info);
- return sys_info.freqPCI;
-}
-
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
- && !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long temp;
- unsigned long m;
-
- /* Extract configured divisors */
- strp0 = mfdcr( CPC0_STRP0 );
- sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
- sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
- sysInfo->pllFbkDiv = temp ? temp : 16;
- sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
- sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
-
- /* Calculate 'M' based on feedback source */
- if( strp0 & PLLSYS0_EXTSL_MASK )
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-#else
-
-#if !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long temp1;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
-
-#if defined(CONFIG_YUCCA)
- unsigned long sys_freq;
- unsigned long sys_per=0;
- unsigned long msr;
- unsigned long pci_clock_per;
- unsigned long sdr_ddrpll;
-
- /*-------------------------------------------------------------------------+
- | Get the system clock period.
- +-------------------------------------------------------------------------*/
- sys_per = determine_sysper();
-
- msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
-
- /*-------------------------------------------------------------------------+
- | Calculate the system clock speed from the period.
- +-------------------------------------------------------------------------*/
- sys_freq = (ONE_BILLION / sys_per) * 1000;
-#endif
-
- /* Extract configured divisors */
- mfsdr( SDR0_SDSTP0,strp0 );
- mfsdr( SDR0_SDSTP1,strp1 );
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
- sysInfo->pllFwdDivA = temp ? temp : 16 ;
- temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
- sysInfo->pllOpbDiv = temp ? temp : 4;
- temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
- prbdv0 = (strp0 >> 2) & 0x7;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
- lfdiv = temp1 ? temp1 : 64;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
- if (!temp)
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
-#if defined(CONFIG_YUCCA)
- sysInfo->freqVCOMhz = (m * sys_freq) ;
-#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-#endif
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
-#if defined(CONFIG_YUCCA)
- /* Determine PCI Clock Period */
- pci_clock_per = determine_pci_clock_per();
- sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-#endif
-
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-#endif /* CONFIG_XILINX_440 */
-
-#if defined(CONFIG_YUCCA)
-unsigned long determine_sysper(void)
-{
- unsigned int fpga_clocking_reg;
- unsigned int master_clock_selection;
- unsigned long master_clock_per = 0;
- unsigned long fb_div_selection;
- unsigned int vco_div_reg_value;
- unsigned long vco_div_selection;
- unsigned long sys_per = 0;
- int extClkVal;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 0 and reg 1 to get FPGA reg information
- +-------------------------------------------------------------------------*/
- fpga_clocking_reg = in16(FPGA_REG16);
-
-
- /* Determine Master Clock Source Selection */
- master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
-
- switch(master_clock_selection) {
- case FPGA_REG16_MASTER_CLK_66_66:
- master_clock_per = PERIOD_66_66MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_50:
- master_clock_per = PERIOD_50_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_33_33:
- master_clock_per = PERIOD_33_33MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_25:
- master_clock_per = PERIOD_25_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_EXT:
- if ((extClkVal==EXTCLK_33_33)
- && (extClkVal==EXTCLK_50)
- && (extClkVal==EXTCLK_66_66)
- && (extClkVal==EXTCLK_83)) {
- /* calculate master clock period from external clock value */
- master_clock_per=(ONE_BILLION/extClkVal) * 1000;
- } else {
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- break;
- default:
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- break;
- }
-
- /* Determine FB divisors values */
- if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_6;
- else
- fb_div_selection = FPGA_FB_DIV_12;
- } else {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_10;
- else
- fb_div_selection = FPGA_FB_DIV_20;
- }
-
- /* Determine VCO divisors values */
- vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
-
- switch(vco_div_reg_value) {
- case FPGA_REG16_VCO_DIV_4:
- vco_div_selection = FPGA_VCO_DIV_4;
- break;
- case FPGA_REG16_VCO_DIV_6:
- vco_div_selection = FPGA_VCO_DIV_6;
- break;
- case FPGA_REG16_VCO_DIV_8:
- vco_div_selection = FPGA_VCO_DIV_8;
- break;
- case FPGA_REG16_VCO_DIV_10:
- default:
- vco_div_selection = FPGA_VCO_DIV_10;
- break;
- }
-
- if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
- switch(master_clock_per) {
- case PERIOD_25_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_33_33MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_50_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_50_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_75_00MHZ;
- }
- break;
- case PERIOD_66_66MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_66_66MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_100_00MHZ;
- }
- break;
- default:
- break;
- }
-
- if (sys_per == 0) {
- /* Other combinations are not supported */
- DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- } else {
- /* calcul system clock without cheking */
- /* if engineering option clock no check is selected */
- /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
- sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
- }
-
- return(sys_per);
-}
-
-/*-------------------------------------------------------------------------+
-| determine_pci_clock_per.
-+-------------------------------------------------------------------------*/
-unsigned long determine_pci_clock_per(void)
-{
- unsigned long pci_clock_selection, pci_period;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 6 to get PCI 0 FPGA reg information
- +-------------------------------------------------------------------------*/
- pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
-
-
- pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
-
- switch (pci_clock_selection) {
- case FPGA_REG16_PCI0_CLK_133_33:
- pci_period = PERIOD_133_33MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_100:
- pci_period = PERIOD_100_00MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_66_66:
- pci_period = PERIOD_66_66MHZ;
- break;
- default:
- pci_period = PERIOD_33_33MHZ;;
- break;
- }
-
- return(pci_period);
-}
-#endif
-
-#elif defined(CONFIG_XILINX_405)
-extern void get_sys_info (sys_info_t * sysInfo);
-extern ulong get_PCI_freq (void);
-
-#elif defined(CONFIG_AP1000)
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqProcessor = 240 * 1000 * 1000;
- sysInfo->freqPLB = 80 * 1000 * 1000;
- sysInfo->freqPCI = 33 * 1000 * 1000;
-}
-
-#elif defined(CONFIG_405)
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqVCOMhz=3125000;
- sysInfo->freqProcessor=12*1000*1000;
- sysInfo->freqPLB=50*1000*1000;
- sysInfo->freqPCI=66*1000*1000;
-}
-
-#elif defined(CONFIG_405EP)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr0;
- unsigned long pllmr1;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m;
- unsigned long pllmr0_ccdv;
-
- /*
- * Read PLL Mode registers
- */
- pllmr0 = mfdcr (CPC0_PLLMR0);
- pllmr1 = mfdcr (CPC0_PLLMR1);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B (should be equal to A)
- */
- sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 16;
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
-
- /*
- * Determine the M factor
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
- if (pllmr1 & PLLMR1_SSCS_MASK) {
- /*
- * This is true if FWDVA == FWDVB:
- * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- * / pllmr0_ccdv;
- */
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
- / sysInfo->pllFwdDiv / pllmr0_ccdv;
- } else {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
- }
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-
- sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-#elif defined(CONFIG_405EZ)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long cpr_plld;
- unsigned long cpr_pllc;
- unsigned long cpr_primad;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
- unsigned long primad_cpudv;
- unsigned long m;
- unsigned long plloutb;
-
- /*
- * Read PLL Mode registers
- */
- mfcpr(CPR0_PLLD, cpr_plld);
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B
- */
- sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0)
- sysInfo->pllFwdDivB = 8;
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 256;
-
- /*
- * Read CPR_PRIMAD register
- */
- mfcpr(CPC0_PRIMAD, cpr_primad);
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0)
- sysInfo->pllPlbDiv = 16;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0)
- sysInfo->pllExtBusDiv = 16;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0)
- sysInfo->pllOpbDiv = 16;
-
- /*
- * Determine the M factor
- */
- if (cpr_pllc & PLLC_SRC_MASK)
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0)
- primad_cpudv = 16;
-
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / primad_cpudv;
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
-
- sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllOpbDiv;
-
- sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllExtBusDiv;
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
- sysInfo->pllFwdDivB);
- sysInfo->freqUART = plloutb;
-}
-
-#elif defined(CONFIG_405EX)
-
-/*
- * TODO: We need to get the CPR registers and calculate these values correctly!!!!
- * We need the specs!!!!
- */
-static unsigned char get_fbdv(unsigned char index)
-{
- unsigned char ret = 0;
- /* This is table should be 256 bytes.
- * Only take first 52 values.
- */
- unsigned char fbdv_tb[] = {
- 0x00, 0xff, 0x7f, 0xfd,
- 0x7a, 0xf5, 0x6a, 0xd5,
- 0x2a, 0xd4, 0x29, 0xd3,
- 0x26, 0xcc, 0x19, 0xb3,
- 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba,
- 0x74, 0xe9, 0x52, 0xa5,
- 0x4b, 0x96, 0x2c, 0xd8,
- 0x31, 0xe3, 0x46, 0x8d,
- 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed,
- 0x5a, 0xb5, 0x6b, 0xd6,
- 0x2d, 0xdb, 0x36, 0xec,
-
- };
-
- if ((index & 0x7f) == 0)
- return 1;
- while (ret < sizeof (fbdv_tb)) {
- if (fbdv_tb[ret] == index)
- break;
- ret++;
- }
- ret++;
-
- return ret;
-}
-
-#define PLL_FBK_PLL_LOCAL 0
-#define PLL_FBK_CPU 1
-#define PLL_FBK_PERCLK 5
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m = 1;
- unsigned int tmp;
- unsigned char fwdva[16] = {
- 1, 2, 14, 9, 4, 11, 16, 13,
- 12, 5, 6, 15, 10, 7, 8, 3,
- };
- unsigned char sel, cpudv0, plb2xDiv;
-
- mfcpr(CPR0_PLLD, tmp);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
-
- /*
- * Determine PLBDV0
- */
- sysInfo->pllPlbDiv = 2;
-
- /*
- * Determine PERDV0
- */
- mfcpr(CPR0_PERD, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
-
- /*
- * Determine OPBDV0
- */
- mfcpr(CPR0_OPBD0, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
-
- /* Determine PLB2XDV0 */
- mfcpr(CPR0_PLBD, tmp);
- tmp = (tmp >> 16) & 0x07;
- plb2xDiv = (tmp == 0) ? 8 : tmp;
-
- /* Determine CPUDV0 */
- mfcpr(CPR0_CPUD, tmp);
- tmp = (tmp >> 24) & 0x07;
- cpudv0 = (tmp == 0) ? 8 : tmp;
-
- /* Determine SEL(5:7) in CPR0_PLLC */
- mfcpr(CPR0_PLLC, tmp);
- sel = (tmp >> 24) & 0x07;
-
- /*
- * Determine the M factor
- * PLL local: M = FBDV
- * CPU clock: M = FBDV * FWDVA * CPUDV0
- * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
- *
- */
- switch (sel) {
- case PLL_FBK_CPU:
- m = sysInfo->pllFwdDiv * cpudv0;
- break;
- case PLL_FBK_PERCLK:
- m = sysInfo->pllFwdDiv * plb2xDiv * 2
- * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
- break;
- case PLL_FBK_PLL_LOCAL:
- break;
- default:
- printf("%s unknown m\n", __FUNCTION__);
- return;
-
- }
- m *= sysInfo->pllFbkDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
-
- /*
- * Determine PLB clock frequency, ddr1x should be the same
- */
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-
-int get_clocks (void)
-{
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqPLB;
-
-#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
-
-#ifdef CONFIG_IOP480
- gd->cpu_clk = 66000000;
- gd->bus_clk = 66000000;
-#endif
- return (0);
-}
-
-
-/********************************************
- * get_bus_freq
- * return PLB bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- ulong val;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB;
-
-#elif defined(CONFIG_IOP480)
-
- val = 66;
-
-#else
-# error get_bus_freq() not implemented
-#endif
-
- return val;
-}
-
-#if !defined(CONFIG_IOP480)
-ulong get_OPB_freq (void)
-{
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
-
- return sys_info.freqOPB;
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*------------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------
- */
-
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <ppc4xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx-isram.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
-# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
-# define PBxAP PB1AP
-# define PBxCR PB0CR
-# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
-# define PBxAP PB1AP
-# define PBxCR PB1CR
-# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
-# define PBxAP PB2AP
-# define PBxCR PB2CR
-# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
-# define PBxAP PB3AP
-# define PBxCR PB3CR
-# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
-# define PBxAP PB4AP
-# define PBxCR PB4CR
-# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
-# define PBxAP PB5AP
-# define PBxCR PB5CR
-# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
-# define PBxAP PB6AP
-# define PBxCR PB6CR
-# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
-# define PBxAP PB7AP
-# define PBxCR PB7CR
-# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
-# endif
-# endif
-# ifndef PBxAP_VAL
-# define PBxAP_VAL 0
-# endif
-# ifndef PBxCR_VAL
-# define PBxCR_VAL 0
-# endif
-/*
- * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
- * used as temporary stack pointer for the primordial stack
- */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
-# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(7) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(0) | \
- EBC_BXAP_WBN_ENCODE(0) | \
- EBC_BXAP_WBF_ENCODE(0) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
-# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
- EBC_BXCR_BS_64MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
-# ifndef CONFIG_SYS_INIT_RAM_PATTERN
-# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
-# endif
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
-#endif
-
-/*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
- */
-#if !defined(CONFIG_SYS_FLASH_BASE)
-/* If not already defined, set it to the "last" 128MByte region */
-# define CONFIG_SYS_FLASH_BASE 0xf8000000
-#endif
-#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
-# define CONFIG_SYS_ICACHE_SACR_VALUE \
- (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
-#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
-
-#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
-# define CONFIG_SYS_DCACHE_SACR_VALUE \
- (0x00000000)
-#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
-
-#define function_prolog(func_name) .text; \
- .align 2; \
- .globl func_name; \
- func_name:
-#define function_epilog(func_name) .type func_name,@function; \
- .size func_name,.-func_name
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-
- .extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
- .extern reconfig_tlb0
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-#if !defined(CONFIG_NAND_SPL)
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-#endif /* CONFIG_NAND_SPL */
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*
- * NAND U-Boot image is started from offset 0
- */
- .text
-#if defined(CONFIG_440)
- bl reconfig_tlb0
-#endif
- GET_GOT
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
- /*
- * 4xx RAM-booting U-Boot image is started from offset 0
- */
- .text
- bl _start_440
-#endif
-
-/*
- * 440 Startup -- on reset only the top 4k of the effective
- * address space is mapped in by an entry in the instruction
- * and data shadow TLB. The .bootpg section is located in the
- * top 4k & does only what's necessary to map in the the rest
- * of the boot rom. Once the boot rom is mapped in we can
- * proceed with normal startup.
- *
- * NOTE: CS0 only covers the top 2MB of the effective address
- * space after reset.
- */
-
-#if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
- .section .bootpg,"ax"
-#endif
- .globl _start_440
-
-/**************************************************************************/
-_start_440:
- /*--------------------------------------------------------------------+
- | 440EPX BUP Change - Hardware team request
- +--------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- sync
- nop
- nop
-#endif
- /*----------------------------------------------------------------+
- | Core bug fix. Clear the esr
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_ESR,r0
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- iccci r0,r0 /* NOTE: operands not used for 440 */
- dccci r0,r0 /* NOTE: operands not used for 440 */
- sync
- li r0,0
- mtspr SPRN_SRR0,r0
- mtspr SPRN_SRR1,r0
- mtspr SPRN_CSRR0,r0
- mtspr SPRN_CSRR1,r0
- /* NOTE: 440GX adds machine check status regs */
-#if defined(CONFIG_440) && !defined(CONFIG_440GP)
- mtspr SPRN_MCSRR0,r0
- mtspr SPRN_MCSRR1,r0
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#endif
-
- /*----------------------------------------------------------------*/
- /* CCR0 init */
- /*----------------------------------------------------------------*/
- /* Disable store gathering & broadcast, guarantee inst/data
- * cache block touch, force load/store alignment
- * (see errata 1.12: 440_33)
- */
- lis r1,0x0030 /* store gathering & broadcast disable */
- ori r1,r1,0x6000 /* cache touch */
- mtspr SPRN_CCR0,r1
-
- /*----------------------------------------------------------------*/
- /* Initialize debug */
- /*----------------------------------------------------------------*/
- mfspr r1,SPRN_DBCR0
- andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
- bne skip_debug_init /* if set, don't clear debug register */
- mtspr SPRN_DBCR0,r0
- mtspr SPRN_DBCR1,r0
- mtspr SPRN_DBCR2,r0
- mtspr SPRN_IAC1,r0
- mtspr SPRN_IAC2,r0
- mtspr SPRN_IAC3,r0
- mtspr SPRN_DAC1,r0
- mtspr SPRN_DAC2,r0
- mtspr SPRN_DVC1,r0
- mtspr SPRN_DVC2,r0
-
- mfspr r1,SPRN_DBSR
- mtspr SPRN_DBSR,r1 /* Clear all valid bits */
-skip_debug_init:
-
-#if defined (CONFIG_440SPE)
- /*----------------------------------------------------------------+
- | Initialize Core Configuration Reg1.
- | a. ICDPEI: Record even parity. Normal operation.
- | b. ICTPEI: Record even parity. Normal operation.
- | c. DCTPEI: Record even parity. Normal operation.
- | d. DCDPEI: Record even parity. Normal operation.
- | e. DCUPEI: Record even parity. Normal operation.
- | f. DCMPEI: Record even parity. Normal operation.
- | g. FCOM: Normal operation
- | h. MMUPEI: Record even parity. Normal operation.
- | i. FFF: Flush only as much data as necessary.
- | j. TCS: Timebase increments from CPU clock.
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_CCR1, r0
-
- /*----------------------------------------------------------------+
- | Reset the timebase.
- | The previous write to CCR1 sets the timebase source.
- +-----------------------------------------------------------------*/
- mtspr SPRN_TBWL, r0
- mtspr SPRN_TBWU, r0
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup interrupt vectors */
- /*----------------------------------------------------------------*/
- mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
- li r1,0x0100
- mtspr SPRN_IVOR0,r1 /* Critical input */
- li r1,0x0200
- mtspr SPRN_IVOR1,r1 /* Machine check */
- li r1,0x0300
- mtspr SPRN_IVOR2,r1 /* Data storage */
- li r1,0x0400
- mtspr SPRN_IVOR3,r1 /* Instruction storage */
- li r1,0x0500
- mtspr SPRN_IVOR4,r1 /* External interrupt */
- li r1,0x0600
- mtspr SPRN_IVOR5,r1 /* Alignment */
- li r1,0x0700
- mtspr SPRN_IVOR6,r1 /* Program check */
- li r1,0x0800
- mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
- li r1,0x0c00
- mtspr SPRN_IVOR8,r1 /* System call */
- li r1,0x0a00
- mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
- li r1,0x0900
- mtspr SPRN_IVOR10,r1 /* Decrementer */
- li r1,0x1300
- mtspr SPRN_IVOR13,r1 /* Data TLB error */
- li r1,0x1400
- mtspr SPRN_IVOR14,r1 /* Instr TLB error */
- li r1,0x2000
- mtspr SPRN_IVOR15,r1 /* Debug */
-
- /*----------------------------------------------------------------*/
- /* Configure cache regions */
- /*----------------------------------------------------------------*/
- mtspr SPRN_INV0,r0
- mtspr SPRN_INV1,r0
- mtspr SPRN_INV2,r0
- mtspr SPRN_INV3,r0
- mtspr SPRN_DNV0,r0
- mtspr SPRN_DNV1,r0
- mtspr SPRN_DNV2,r0
- mtspr SPRN_DNV3,r0
- mtspr SPRN_ITV0,r0
- mtspr SPRN_ITV1,r0
- mtspr SPRN_ITV2,r0
- mtspr SPRN_ITV3,r0
- mtspr SPRN_DTV0,r0
- mtspr SPRN_DTV1,r0
- mtspr SPRN_DTV2,r0
- mtspr SPRN_DTV3,r0
-
- /*----------------------------------------------------------------*/
- /* Cache victim limits */
- /*----------------------------------------------------------------*/
- /* floors 0, ceiling max to use the entire cache -- nothing locked
- */
- lis r1,0x0001
- ori r1,r1,0xf800
- mtspr SPRN_IVLIM,r1
- mtspr SPRN_DVLIM,r1
-
- /*----------------------------------------------------------------+
- |Initialize MMUCR[STID] = 0.
- +-----------------------------------------------------------------*/
- mfspr r0,SPRN_MMUCR
- addis r1,0,0xFFFF
- ori r1,r1,0xFF00
- and r0,r0,r1
- mtspr SPRN_MMUCR,r0
-
- /*----------------------------------------------------------------*/
- /* Clear all TLB entries -- TID = 0, TS = 0 */
- /*----------------------------------------------------------------*/
- addis r0,0,0x0000
-#ifdef CONFIG_SYS_RAMBOOT
- li r4,0 /* Start with TLB #0 */
-#else
- li r4,1 /* Start with TLB #1 */
-#endif
- li r1,64 /* 64 TLB entries */
- sub r1,r1,r4 /* calculate last TLB # */
- mtctr r1
-rsttlb:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
- rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
- beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
-#endif
- tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
- tlbwe r0,r4,1
- tlbwe r0,r4,2
-tlbnxt: addi r4,r4,1 /* Next TLB */
- bdnz rsttlb
-
- /*----------------------------------------------------------------*/
- /* TLB entry setup -- step thru tlbtab */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE_REVA)
- /*----------------------------------------------------------------*/
- /* We have different TLB tables for revA and rev B of 440SPe */
- /*----------------------------------------------------------------*/
- mfspr r1, PVR
- lis r0,0x5342
- ori r0,r0,0x1891
- cmpw r7,r1,r0
- bne r7,..revA
- bl tlbtabB
- b ..goon
-..revA:
- bl tlbtabA
-..goon:
-#else
- bl tlbtab /* Get tlbtab pointer */
-#endif
- mr r5,r0
- li r1,0x003f /* 64 TLB entries max */
- mtctr r1
- li r4,0 /* TLB # */
-
- addi r5,r5,-4
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 */
- rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
- bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
-#endif
- lwzu r0,4(r5)
- cmpwi r0,0
- beq 2f /* 0 marks end */
- lwzu r1,4(r5)
- lwzu r2,4(r5)
- tlbwe r0,r4,0 /* TLB Word 0 */
- tlbwe r1,r4,1 /* TLB Word 1 */
- tlbwe r2,r4,2 /* TLB Word 2 */
-tlbnx2: addi r4,r4,1 /* Next TLB */
- bdnz 1b
-
- /*----------------------------------------------------------------*/
- /* Continue from 'normal' start */
- /*----------------------------------------------------------------*/
-2:
- bl 3f
- b _start
-
-3: li r0,0
- mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
- mflr r1
- mtspr SPRN_SRR0,r1
- rfi
-#endif /* CONFIG_440 */
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-#ifndef CONFIG_NAND_SPL
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
-
-#ifdef CONFIG_440
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#else
- CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#endif /* CONFIG_440 */
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
- STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
- STD_EXCEPTION(0xa00, APU, UnknownException)
-#endif
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
-#else
- STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-#endif
- CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
- . = _START_OFFSET
-#endif
- .globl _start
-_start:
-
-/*****************************************************************************/
-#if defined(CONFIG_440)
-
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- li r0,0x0000
- lis r1,0xffff
- mtspr SPRN_DEC,r0 /* prevent dec exceptions */
- mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
- mtspr SPRN_TBWU,r0
- mtspr SPRN_TSR,r1 /* clear all timer exception status */
- mtspr SPRN_TCR,r0 /* disable all */
- mtspr SPRN_ESR,r0 /* clear exception syndrome register */
- mtxer r0 /* clear integer exception register */
-
- /*----------------------------------------------------------------*/
- /* Debug setup -- some (not very good) ice's need an event*/
- /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
- /* value you need in this case 0x8cff 0000 should do the trick */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr SPRN_DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr SPRN_DBCR0,r0
- isync
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup the internal SRAM */
- /*----------------------------------------------------------------*/
- li r0,0
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /* Clear Dcache to use as RAM */
- addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
- ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ran
- addi r5,r5,0x0001
-..d_ran:
- mtctr r5
-..d_ag:
- dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag
-
- /*
- * Lock the init-ram/stack in d-cache, so that other regions
- * may use d-cache as well
- * Note, that this current implementation locks exactly 4k
- * of d-cache, so please make sure that you don't define a
- * bigger init-ram area. Take a look at the lwmon5 440EPx
- * implementation as a reference.
- */
- msync
- isync
- /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
- lis r1,0x0201
- ori r1,r1,0xf808
- mtspr SPRN_DVLIM,r1
- lis r1,0x0808
- ori r1,r1,0x0808
- mtspr SPRN_DNV0,r1
- mtspr SPRN_DNV1,r1
- mtspr SPRN_DNV2,r1
- mtspr SPRN_DNV3,r1
- mtspr SPRN_DTV0,r1
- mtspr SPRN_DTV1,r1
- mtspr SPRN_DTV2,r1
- mtspr SPRN_DTV3,r1
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
- /* 440EP & 440GR are only 440er PPC's without internal SRAM */
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
- /* not all PPC's have internal SRAM usable as L2-cache */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460SX)
- mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1, 0x0000
- ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
- mtdcr L2_CACHE_CFG,r1
-#endif
-
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM0_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM0_DPC,r1
- mfdcr r1,ISRAM0_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM0_PMEG,r1
-
- lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
- ori r1,r1,0x0980 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x8001
- ori r1,r1,0x0980 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x8002
- ori r1,r1, 0x0980 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x8003
- ori r1,r1, 0x0980 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1,0x0000 /* BAS = X_0000_0000 */
- ori r1,r1,0x0984 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0984 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0984 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0984 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM1_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM1_DPC,r1
- mfdcr r1,ISRAM1_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM1_PMEG,r1
-
- lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
- mtdcr ISRAM1_SB0CR,r1
-#endif
-#elif defined(CONFIG_460SX)
- lis r1,0x0000 /* BAS = 0000_0000 */
- ori r1,r1,0x0B84 /* first 128k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0B84 /* second 128k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0B84 /* third 128k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0B84 /* fourth 128k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440GP)
- ori r1,r1,0x0380 /* 8k rw */
- mtdcr ISRAM0_SB0CR,r1
- mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
-#endif
-#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
-
- /*----------------------------------------------------------------*/
- /* Setup the stack in internal SRAM */
- /*----------------------------------------------------------------*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0, RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#endif /* CONFIG_440 */
-
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405)
- /*----------------------------------------------------------------------- */
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------------- */
- addi r4,r0,0x0000
-#if !defined(CONFIG_405EX)
- mtspr SPRN_SGR,r4
-#else
- /*
- * On 405EX, completely clearing the SGR leads to PPC hangup
- * upon PCIe configuration access. The PCIe memory regions
- * need to be guarded!
- */
- lis r3,0x0000
- ori r3,r3,0x7FFC
- mtspr SPRN_SGR,r3
-#endif
- mtspr SPRN_DCWR,r4
- mtesr r4 /* clear Exception Syndrome Reg */
- mttcr r4 /* clear Timer Control Reg */
- mtxer r4 /* clear Fixed-Point Exception Reg */
- mtevpr r4 /* clear Exception Vector Prefix Reg */
- addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
- /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
-
- /* Invalidate the i- and d-caches. */
- bl invalidate_icache
- bl invalidate_dcache
-
- /* Set-up icache cacheability. */
- lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r4
- isync
-
- /* Set-up dcache cacheability. */
- lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r4
-
-#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
- && !defined (CONFIG_XILINX_405)
- /*----------------------------------------------------------------------- */
- /* Tune the speed and size for flash CS0 */
- /*----------------------------------------------------------------------- */
- bl ext_bus_cntlr_init
-#endif
-
-#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
- /*
- * For boards that don't have OCM and can't use the data cache
- * for their primordial stack, setup stack here directly after the
- * SDRAM is initialized in ext_bus_cntlr_init.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
-
-#if defined(CONFIG_405EP)
- /*----------------------------------------------------------------------- */
- /* DMA Status, clear to come up clean */
- /*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
- ori r3,r3, 0xFFFF
- mtdcr DMASR, r3
-
- bl ppc405ep_init /* do ppc405ep specific init */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
-#if defined(CONFIG_405EZ)
- /********************************************************************
- * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
- *******************************************************************/
- /*
- * We can map the OCM on the PLB3, so map it at
- * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
- */
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_DSRC1, r3 /* Set Data Side */
- mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_DSRC2, r3 /* Set Data Side */
- mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
- addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
- mtdcr OCM0_DISDPC,r3
-
- isync
-#else /* CONFIG_405EZ */
- /********************************************************************
- * Setup OCM - On Chip Memory
- *******************************************************************/
- /* Setup OCM */
- lis r0, 0x7FFF
- ori r0, r0, 0xFFFF
- mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
- mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
- and r3, r3, r0 /* disable data-side IRAM */
- and r4, r4, r0 /* disable data-side IRAM */
- mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
- mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- mtdcr OCM0_DSARC, r3
- addis r4, 0, 0xC000 /* OCM data area enabled */
- mtdcr OCM0_DSCNTL, r4
- isync
-#endif /* CONFIG_405EZ */
-#endif
-
- /*----------------------------------------------------------------------- */
- /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
- /*----------------------------------------------------------------------- */
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
- li r4, PBxAP
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
- mtdcr EBC0_CFGDATA, r4
-
- addi r4, 0, PBxCR
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
- mtdcr EBC0_CFGDATA, r4
-
- /*
- * Enable the data cache for the 128MB storage access control region
- * at CONFIG_SYS_INIT_RAM_ADDR.
- */
- mfdccr r4
- oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- mtdccr r4
-
- /*
- * Preallocate data cache lines to be used to avoid a subsequent
- * cache miss and an ensuing machine check exception when exceptions
- * are enabled.
- */
- li r0, 0
-
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
-
- /*
- * Convert the size, in bytes, to the number of cache lines/blocks
- * to preallocate.
- */
- clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
- srwi r5, r4, L1_CACHE_SHIFT
- beq ..load_counter
- addi r5, r5, 0x0001
-..load_counter:
- mtctr r5
-
- /* Preallocate the computed number of cache blocks. */
-..alloc_dcache_block:
- dcba r0, r3
- addi r3, r3, L1_CACHE_BYTES
- bdnz ..alloc_dcache_block
- sync
-
- /*
- * Load the initial stack pointer and data area and convert the size,
- * in bytes, to the number of words to initialize to a known value.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
-
- lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
- ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
- mtctr r4
-
- lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
-
- lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
-
-..stackloop:
- stwu r4, -4(r2)
- bdnz ..stackloop
-
- /*
- * Make room for stack frame header and clear final stack frame so
- * that stack backtraces terminate cleanly.
- */
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-
-#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
- (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
- /*
- * Stack in OCM.
- */
-
- /* Set up Stack at top of OCM */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
-
- /* Set up a zeroized stack frame so that backtrace works right */
- li r0, 0
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT /* initialize GOT access */
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- /* NEVER RETURNS! */
- bl board_init_f /* run first part of init code (from Flash) */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
- /*----------------------------------------------------------------------- */
-
-
-#ifndef CONFIG_NAND_SPL
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-#ifdef CONFIG_440
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-#endif /* CONFIG_440 */
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = Relocated stack pointer
- * r4 = Relocated global data pointer
- * r5 = Relocated text pointer
- */
- .globl relocate_code
-relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
- */
-
- /* Save registers */
- mr r9, r3
- mr r10, r4
- mr r11, r5
-
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
- bl flush_dcache_range
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * Undo the earlier data cache set-up for the primordial stack and
- * data area. First, invalidate the data cache and then disable data
- * cacheability for that area. Finally, restore the EBC values, if
- * any.
- */
-
- /* Invalidate the primordial stack and data area in cache */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
- add r4, r4, r3
-
- bl invalidate_dcache_range
-
- /* Disable cacheability for the region */
- mfdccr r3
- lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- and r3, r3, r4
- mtdccr r3
-
- /* Restore the EBC parameters */
- li r3, PBxAP
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxAP_VAL@h
- ori r3, r3, PBxAP_VAL@l
- mtdcr EBC0_CFGDATA, r3
-
- li r3, PBxCR
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxCR_VAL@h
- ori r3, r3, PBxCR_VAL@l
- mtdcr EBC0_CFGDATA, r3
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
- /* Restore registers */
- mr r3, r9
- mr r4, r10
- mr r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /*
- * Unlock the previously locked d-cache
- */
- msync
- isync
- /* set TFLOOR/NFLOOR to 0 again */
- lis r6,0x0001
- ori r6,r6,0xf800
- mtspr SPRN_DVLIM,r6
- lis r6,0x0000
- ori r6,r6,0x0000
- mtspr SPRN_DNV0,r6
- mtspr SPRN_DNV1,r6
- mtspr SPRN_DNV2,r6
- mtspr SPRN_DNV3,r6
- mtspr SPRN_DTV0,r6
- mtspr SPRN_DTV1,r6
- mtspr SPRN_DTV2,r6
- mtspr SPRN_DTV3,r6
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
- * to speed up the boot process. Now this cache needs to be disabled.
- */
- iccci 0,0 /* Invalidate inst cache */
- dccci 0,0 /* Invalidate data cache, now no longer our stack */
- sync
- isync
-
- /* Clear all potential pending exceptions */
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
- addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
-#else
- addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
- tlbre r0,r1,0x0002 /* Read contents */
- ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
- tlbwe r0,r1,0x0002 /* Save it out */
- sync
- isync
-#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Init Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, L1_CACHE_BYTES /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 7f
-
- li r0, 0
-
- andi. r5, r4, 3
- beq 6f
- sub r4, r4, r5
- mtctr r5
- mr r5, r4
-5: stb r0, 0(r5)
- addi r5, r5, 1
- bdnz 5b
-6:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 6b
-
-7:
- mr r3, r9 /* Init Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start_of_vectors)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + _START_OFFSET
- li r8, Alignment - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
-
-#ifdef CONFIG_440
- li r7, .L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_APU - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBError - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBError - _start + _START_OFFSET
- bl trap_reloc
-#else /* CONFIG_440 */
- li r7, .L_PIT - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-#endif /* CONFIG_440 */
-
- li r7, .L_DebugBreakpoint - _start + _START_OFFSET
- bl trap_reloc
-
-#if !defined(CONFIG_440)
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtmsr r7 /* change MSR */
-#else
- bl __440_msr_set
- b __440_msr_continue
-
-__440_msr_set:
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtspr SPRN_SRR1,r7
- mflr r7
- mtspr SPRN_SRR0,r7
- rfi
-__440_msr_continue:
-#endif
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| dcbz_area.
-+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
-#endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/**************************************************************************/
-/* PPC405EP specific stuff */
-/**************************************************************************/
-#ifdef CONFIG_405EP
-ppc405ep_init:
-
-#ifdef CONFIG_BUBINGA
- /*
- * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
- * function) to support FPGA and NVRAM accesses below.
- */
-
- lis r3,GPIO0_OSRH@h /* config GPIO output select */
- ori r3,r3,GPIO0_OSRH@l
- lis r4,CONFIG_SYS_GPIO0_OSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_OSRL@h
- ori r3,r3,GPIO0_OSRL@l
- lis r4,CONFIG_SYS_GPIO0_OSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_ISR1H@h /* config GPIO input select */
- ori r3,r3,GPIO0_ISR1H@l
- lis r4,CONFIG_SYS_GPIO0_ISR1H@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
- stw r4,0(r3)
- lis r3,GPIO0_ISR1L@h
- ori r3,r3,GPIO0_ISR1L@l
- lis r4,CONFIG_SYS_GPIO0_ISR1L@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
- ori r3,r3,GPIO0_TSRH@l
- lis r4,CONFIG_SYS_GPIO0_TSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_TSRL@h
- ori r3,r3,GPIO0_TSRL@l
- lis r4,CONFIG_SYS_GPIO0_TSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
- ori r3,r3,GPIO0_TCR@l
- lis r4,CONFIG_SYS_GPIO0_TCR@h
- ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
- stw r4,0(r3)
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB4AP /* program EBC bank 4 for FPGA access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB4CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
- mtdcr EBC0_CFGDATA,r3
-#endif
-
- /*
- !-----------------------------------------------------------------------
- ! Check to see if chip is in bypass mode.
- ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
- ! CPU reset Otherwise, skip this step and keep going.
- ! Note: Running BIOS in bypass mode is not supported since PLB speed
- ! will not be fast enough for the SDRAM (min 66MHz)
- !-----------------------------------------------------------------------
- */
- mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r4,0x1
-
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
-
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Read NVRAM to get value to write in PLLMR.
- ! If value has not been correctly saved, write default value
- ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
- ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
- !
- ! WARNING: This code assumes the first three words in the nvram_t
- ! structure in openbios.h. Changing the beginning of
- ! the structure will break this code.
- !
- !-----------------------------------------------------------------------
- */
- addis r3,0,NVRAM_BASE@h
- addi r3,r3,NVRAM_BASE@l
-
- lwz r4, 0(r3)
- addis r5,0,NVRVFY1@h
- addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
- bne ..no_pllset
- addi r3,r3,4
- lwz r4, 0(r3)
- addis r5,0,NVRVFY2@h
- addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
- bne ..no_pllset
- addi r3,r3,8 /* Skip over conf_size */
- lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
- lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
- rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r5,1 /* See if PLL is locked */
- beq pll_write
-..no_pllset:
-#endif /* CONFIG_BUBINGA */
-
-#ifdef CONFIG_TAIHU
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- addis r5,0,CPLD_REG0_ADDR@h
- ori r5,r5,CPLD_REG0_ADDR@l
- andi. r5, r5, 0x10
- bne _pci_66mhz
-#endif /* CONFIG_TAIHU */
-
-#if defined(CONFIG_ZEUS)
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- lis r3,0x0000
- addi r3,r3,0x3030
- lis r4,0x8042
- addi r4,r4,0x223e
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
- b 1f
-#endif
-
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
-
-#ifdef CONFIG_TAIHU
- b 1f
-_pci_66mhz:
- addis r3,0,PLLMR0_DEFAULT_PCI66@h
- ori r3,r3,PLLMR0_DEFAULT_PCI66@l
- addis r4,0,PLLMR1_DEFAULT_PCI66@h
- ori r4,r4,PLLMR1_DEFAULT_PCI66@l
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
-#endif /* CONFIG_TAIHU */
-
-1:
- b pll_write /* Write the CPC0_PLLMR with new value */
-
-pll_done:
- /*
- !-----------------------------------------------------------------------
- ! Clear Soft Reset Register
- ! This is needed to enable PCI if not booting from serial EPROM
- !-----------------------------------------------------------------------
- */
- addi r3, 0, 0x0
- mtdcr CPC0_SRR, r3
-
- addis r3,0,0x0010
- mtctr r3
-pci_wait:
- bdnz pci_wait
-
- blr /* return to main code */
-
-/*
-!-----------------------------------------------------------------------------
-! Function: pll_write
-! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
-! That is:
-! 1. Pll is first disabled (de-activated by putting in bypass mode)
-! 2. PLL is reset
-! 3. Clock dividers are set while PLL is held in reset and bypassed
-! 4. PLL Reset is cleared
-! 5. Wait 100us for PLL to lock
-! 6. A core reset is performed
-! Input: r3 = Value to write to CPC0_PLLMR0
-! Input: r4 = Value to write to CPC0_PLLMR1
-! Output r3 = none
-!-----------------------------------------------------------------------------
-*/
- .globl pll_write
-pll_write:
- mfdcr r5, CPC0_UCR
- andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
-
- mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
- mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- /*
- ! Wait min of 100us for PLL to lock.
- ! See CMOS 27E databook for more info.
- ! At 200MHz, that means waiting 20,000 instructions
- */
- addi r3,0,20000 /* 2000 = 0x4e20 */
- mtctr r3
-pll_wait:
- bdnz pll_wait
-
- oris r5,r5,0x8000 /* Enable PLL */
- mtdcr CPC0_PLLMR1,r5 /* Engage */
-
- /*
- * Reset CPU to guarantee timings are OK
- * Not sure if this is needed...
- */
- addis r3,0,0x1000
- mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| mttlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb3)
- TLBWE(4,3,2)
- blr
- function_epilog(mttlb3)
-
-/*----------------------------------------------------------------------------+
-| mftlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb3)
- TLBRE(3,3,2)
- blr
- function_epilog(mftlb3)
-
-/*----------------------------------------------------------------------------+
-| mttlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb2)
- TLBWE(4,3,1)
- blr
- function_epilog(mttlb2)
-
-/*----------------------------------------------------------------------------+
-| mftlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb2)
- TLBRE(3,3,1)
- blr
- function_epilog(mftlb2)
-
-/*----------------------------------------------------------------------------+
-| mttlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb1)
- TLBWE(4,3,0)
- blr
- function_epilog(mttlb1)
-
-/*----------------------------------------------------------------------------+
-| mftlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb1)
- TLBRE(3,3,0)
- blr
- function_epilog(mftlb1)
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
- mr r6,r3
- mr r7,r4
- mflr r8
-
- /*
- * Copy SPL from icache into SDRAM
- */
- subi r3,r3,4
- subi r4,r4,4
- srwi r5,r5,2
- mtctr r5
-..spl_loop:
- lwzu r0,4(r4)
- stwu r0,4(r3)
- bdnz ..spl_loop
-
- /*
- * Calculate "corrected" link register, so that we "continue"
- * in execution in destination range
- */
- sub r3,r7,r6 /* r3 = src - dst */
- sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
- mtlr r8
- blr
-
-nand_boot_common:
- /*
- * First initialize SDRAM. It has to be available *before* calling
- * nand_boot().
- */
- lis r3,CONFIG_SYS_SDRAM_BASE@h
- ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
- bl initdram
-
- /*
- * Now copy the 4k SPL code into SDRAM and continue execution
- * from there.
- */
- lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
- ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
- lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
- lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
- bl nand_boot_relocate
-
- /*
- * We're running from SDRAM now!!!
- *
- * It is necessary for 4xx systems to relocate from running at
- * the original location (0xfffffxxx) to somewhere else (SDRAM
- * preferably). This is because CS0 needs to be reconfigured for
- * NAND access. And we can't reconfigure this CS when currently
- * "running" from it.
- */
-
- /*
- * Finally call nand_boot() to load main NAND U-Boot image from
- * NAND and jump to it.
- */
- bl nand_boot /* will not return */
-#endif /* CONFIG_NAND_SPL */
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_440)
-
-#include <ppc440.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-
-typedef struct region {
- u64 base;
- u32 size;
- u32 tlb_word2_i_value;
-} region_t;
-
-void remove_tlb(u32 vaddr, u32 size)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
- /*
- * Found a TLB in the range.
- * Disable it by writing 0 to tlb0 word.
- */
- mttlb1(i, 0);
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-/*
- * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
- * This function is used to either turn cache on or off in a specific
- * memory area.
- */
-void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_word2_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
- ((tlb_vaddr < (vaddr + size - 1)) &&
- ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
- /*
- * Found a TLB in the range.
- * Change cache attribute in tlb2 word.
- */
- tlb_word2_value =
- TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /*
- * Now either flush or invalidate the dcache
- */
- if (tlb_word2_i_value)
- flush_dcache();
- else
- invalidate_dcache();
-
- mttlb3(i, tlb_word2_value);
- asm("iccci 0,0");
- }
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-static int add_tlb_entry(u64 phys_addr,
- u32 virt_addr,
- u32 tlb_word0_size_value,
- u32 tlb_word2_i_value)
-{
- int i;
- unsigned long tlb_word0_value;
- unsigned long tlb_word1_value;
- unsigned long tlb_word2_value;
-
- /* First, find the index of a TLB entry not being used */
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
- break;
- }
- if (i >= PPC4XX_TLB_SIZE)
- return -1;
-
- /* Second, create the TLB entry */
- tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
- TLB_WORD0_TS_0 | tlb_word0_size_value;
- tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
- TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
- tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /* Wait for all memory accesses to complete */
- sync();
-
- /* Third, add the TLB entries */
- mttlb1(i, tlb_word0_value);
- mttlb2(i, tlb_word1_value);
- mttlb3(i, tlb_word2_value);
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-
- return 0;
-}
-
-static void program_tlb_addr(u64 phys_addr,
- u32 virt_addr,
- u32 mem_size,
- u32 tlb_word2_i_value)
-{
- int rc;
- int tlb_i;
-
- tlb_i = tlb_word2_i_value;
- while (mem_size != 0) {
- rc = 0;
- /* Add the TLB entries in to map the region. */
- if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256MB_SIZE)) {
- /* Add a 256MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
- mem_size -= TLB_256MB_SIZE;
- phys_addr += TLB_256MB_SIZE;
- virt_addr += TLB_256MB_SIZE;
- }
- } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16MB_SIZE)) {
- /* Add a 16MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
- mem_size -= TLB_16MB_SIZE;
- phys_addr += TLB_16MB_SIZE;
- virt_addr += TLB_16MB_SIZE;
- }
- } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1MB_SIZE)) {
- /* Add a 1MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
- mem_size -= TLB_1MB_SIZE;
- phys_addr += TLB_1MB_SIZE;
- virt_addr += TLB_1MB_SIZE;
- }
- } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256KB_SIZE)) {
- /* Add a 256KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
- mem_size -= TLB_256KB_SIZE;
- phys_addr += TLB_256KB_SIZE;
- virt_addr += TLB_256KB_SIZE;
- }
- } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_64KB_SIZE)) {
- /* Add a 64KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
- mem_size -= TLB_64KB_SIZE;
- phys_addr += TLB_64KB_SIZE;
- virt_addr += TLB_64KB_SIZE;
- }
- } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16KB_SIZE)) {
- /* Add a 16KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
- mem_size -= TLB_16KB_SIZE;
- phys_addr += TLB_16KB_SIZE;
- virt_addr += TLB_16KB_SIZE;
- }
- } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_4KB_SIZE)) {
- /* Add a 4KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
- mem_size -= TLB_4KB_SIZE;
- phys_addr += TLB_4KB_SIZE;
- virt_addr += TLB_4KB_SIZE;
- }
- } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1KB_SIZE)) {
- /* Add a 1KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
- mem_size -= TLB_1KB_SIZE;
- phys_addr += TLB_1KB_SIZE;
- virt_addr += TLB_1KB_SIZE;
- }
- } else {
- printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
- phys_addr);
- }
-
- if (rc != 0)
- printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
- phys_addr);
- }
-
- return;
-}
-
-/*
- * Program one (or multiple) TLB entries for one memory region
- *
- * Common usage for boards with SDRAM DIMM modules to dynamically
- * configure the TLB's for the SDRAM
- */
-void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
-{
- region_t region_array;
-
- region_array.base = phys_addr;
- region_array.size = size;
- region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
-
- /* Call the routine to add in the tlb entries for the memory regions */
- program_tlb_addr(region_array.base, virt_addr, region_array.size,
- region_array.tlb_word2_i_value);
-
- return;
-}
-
-#endif /* CONFIG_440 */
+++ /dev/null
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
- */
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-static __inline__ void set_tsr(unsigned long val)
-{
-#if defined(CONFIG_440)
- asm volatile("mtspr 0x150, %0" : : "r" (val));
-#else
- asm volatile("mttsr %0" : : "r" (val));
-#endif
-}
-
-static __inline__ unsigned long get_esr(void)
-{
- unsigned long val;
-
-#if defined(CONFIG_440)
- asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
-#else
- asm volatile("mfesr %0" : "=r" (val) :);
-#endif
- return val;
-}
-
-#define ESR_MCI 0x80000000
-#define ESR_PIL 0x08000000
-#define ESR_PPR 0x04000000
-#define ESR_PTR 0x02000000
-#define ESR_DST 0x00800000
-#define ESR_DIZ 0x00400000
-#define ESR_U0F 0x00008000
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception");
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup, val;
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- u32 value2;
- int corr_ecc = 0;
- int uncorr_ecc = 0;
-#endif
-
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- val = mfspr(MCSR);
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine Check Exception.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
-
- val = get_esr();
-
-#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
- if (val& ESR_IMCP) {
- printf("Instruction");
- mtspr(ESR, val & ~ESR_IMCP);
- } else {
- printf("Data");
- }
- printf(" machine check.\n");
-
-#elif defined(CONFIG_440) || defined(CONFIG_405EX)
- if (val& ESR_IMCP){
- printf("Instruction Synchronous Machine Check exception\n");
- mtspr(SPRN_ESR, val & ~ESR_IMCP);
- } else {
- val = mfspr(MCSR);
- if (val & MCSR_IB)
- printf("Instruction Read PLB Error\n");
-#if defined(CONFIG_440)
- if (val & MCSR_DRB)
- printf("Data Read PLB Error\n");
- if (val & MCSR_DWB)
- printf("Data Write PLB Error\n");
-#else
- if (val & MCSR_DB)
- printf("Data PLB Error\n");
-#endif
- if (val & MCSR_TLBP)
- printf("TLB Parity Error\n");
- if (val & MCSR_ICP){
- /*flush_instruction_cache(); */
- printf("I-Cache Parity Error\n");
- }
- if (val & MCSR_DCSP)
- printf("D-Cache Search Parity Error\n");
- if (val & MCSR_DCFP)
- printf("D-Cache Flush Parity Error\n");
- if (val & MCSR_IMPE)
- printf("Machine Check exception is imprecise\n");
-
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- }
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- mfsdram(DDR0_00, val) ;
- printf("DDR0: DDR0_00 %lx\n", val);
- val = (val >> 16) & 0xff;
- if (val & 0x80)
- printf("DDR0: At least one interrupt active\n");
- if (val & 0x40)
- printf("DDR0: DRAM initialization complete.\n");
- if (val & 0x20) {
- printf("DDR0: Multiple uncorrectable ECC events.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x10) {
- printf("DDR0: Single uncorrectable ECC event.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x08) {
- printf("DDR0: Multiple correctable ECC events.\n");
- corr_ecc = 1;
- }
- if (val & 0x04) {
- printf("DDR0: Single correctable ECC event.\n");
- corr_ecc = 1;
- }
- if (val & 0x02)
- printf("Multiple accesses outside the defined"
- " physical memory space detected\n");
- if (val & 0x01)
- printf("DDR0: Single access outside the defined"
- " physical memory space detected.\n");
-
- mfsdram(DDR0_01, val);
- val = (val >> 8) & 0x7;
- switch (val ) {
- case 0:
- printf("DDR0: Write Out-of-Range command\n");
- break;
- case 1:
- printf("DDR0: Read Out-of-Range command\n");
- break;
- case 2:
- printf("DDR0: Masked write Out-of-Range command\n");
- break;
- case 4:
- printf("DDR0: Wrap write Out-of-Range command\n");
- break;
- case 5:
- printf("DDR0: Wrap read Out-of-Range command\n");
- break;
- default:
- mfsdram(DDR0_01, value2);
- printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
- }
- mfsdram(DDR0_23, val);
- if (((val >> 16) & 0xff) && corr_ecc)
- printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
- (val >> 16) & 0xff);
- mfsdram(DDR0_23, val);
- if (((val >> 8) & 0xff) && uncorr_ecc)
- printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
- (val >> 8) & 0xff);
- mfsdram(DDR0_33, val);
- if (val)
- printf("DDR0: Address of command that caused an "
- "Out-of-Range interrupt %lx\n", val);
- mfsdram(DDR0_34, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_35, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_36, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_37, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_38, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_39, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_40, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_41, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
-#endif /* CONFIG_440EPX */
-#endif /* CONFIG_440 */
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- long esr_val;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
-
- esr_val = get_esr();
- if( esr_val & ESR_PIL )
- printf( "** Illegal Instruction **\n" );
- else if( esr_val & ESR_PPR )
- printf( "** Privileged Instruction **\n" );
- else if( esr_val & ESR_PTR )
- printf( "** Trap Instruction **\n" );
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-DecrementerPITException(struct pt_regs *regs)
-{
- /*
- * Reset PIT interrupt
- */
- set_tsr(0x08000000);
-
- /*
- * Call timer_interrupt routine in interrupts.c
- */
- timer_interrupt(NULL);
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "config.h" /* CONFIG_BOARDDIR */
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
-#ifdef CONFIG_440
- .bootpg RESET_VECTOR_ADDRESS - 0xffc :
- {
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
-
- /*
- * PPC440 board need a board specific object with the
- * TLB definitions. This needs to get included right after
- * start.o, since the first shadow TLB only covers 4k
- * of address space.
- */
- CONFIG_BOARDDIR/init.o (.bootpg)
- } :text = 0xffff
-#endif
-
- .resetvec RESET_VECTOR_ADDRESS :
- {
- *(.resetvec)
- } :text = 0xffff
-
- . = RESET_VECTOR_ADDRESS + 0x4;
-
- /*
- * Make sure that the bss segment isn't linked at 0x0, otherwise its
- * address won't be updated during relocation fixups. Note that
- * this is a temporary fix. Code to dynamically the fixup the bss
- * location will be added in the future. When the bss relocation
- * fixup code is present this workaround should be removed.
- */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
- . |= 0x10;
-#endif
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-#if (UIC_MAX > 3)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
- UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
-#elif (UIC_MAX > 2)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
-#elif (UIC_MAX > 1)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
-#else
-#define UICB0_ALL 0
-#endif
-
-u32 get_dcr(u16);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
-#if (UIC_MAX > 1)
- /* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
-#endif
-}
-
-/* Handler for UIC interrupt */
-static void uic_interrupt(u32 uic_base, int vec_base)
-{
- u32 uic_msr;
- u32 msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = get_dcr(uic_base + UIC_MSR);
- msr_shift = uic_msr;
- vec = vec_base;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000)
- interrupt_run_handler(vec);
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- u32 uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(UIC0MSR);
-
-#if (UIC_MAX > 1)
- if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
- uic_interrupt(UIC1_DCR_BASE, 32);
-#endif
-
-#if (UIC_MAX > 2)
- if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
- uic_interrupt(UIC2_DCR_BASE, 64);
-#endif
-
-#if (UIC_MAX > 3)
- if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
- uic_interrupt(UIC3_DCR_BASE, 96);
-#endif
-
- mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
-
- if (uic_msr & ~(UICB0_ALL))
- uic_interrupt(UIC0_DCR_BASE, 0);
-
- return;
-}
-
-void pic_irq_ack(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0SR, UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1SR, UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2SR, UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3SR, UIC_MASK(vec));
-}
-
-/*
- * Install and free a interrupt handler.
- */
-void pic_irq_enable(unsigned int vec)
-{
-
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
-
- debug("Install interrupt vector %d\n", vec);
-}
-
-void pic_irq_disable(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
-}
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-
-#ifdef CONFIG_4xx_DCACHE
-#include <asm/mmu.h>
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#include "usbdev.h"
-
-int usb_cpu_init(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- usb_dev_init();
-#endif
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
- *
- * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#include "usbdev.h"
-
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
-#define ohci_cpu_to_le16(x) (x)
-#define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- urb_priv_t * purb = &urb_priv;
-
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (®s->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (®s->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (®s->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (®s->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv;
- int i, size = 0;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* if we have an unfinished URB from previous transaction let's
- * fail and scream as quickly as possible so as not to corrupt
- * further communication */
- if (!urb_finished) {
- err("sohci_submit_job: URB NOT FINISHED");
- return -1;
- }
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb_finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- }
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv = &urb_priv;
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return ohci_cpu_to_le16 (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->state = ED_OPER;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = ohci_cpu_to_le32 (info);
- td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
- if (data)
- td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
-
- tdINFO = ohci_cpu_to_le32 (td->hwINFO);
- tdBE = ohci_cpu_to_le32 (td->hwBE);
- tdCBP = ohci_cpu_to_le32 (td->hwCBP);
-
-
- if (!(usb_pipecontrol(lurb_priv->pipe) &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
- (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
- }
-#ifdef CONFIG_MPC5200
- td_list->hwNextTD = 0;
-#endif
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- lurb_priv = &urb_priv;
- tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
-
- ed = td_list->ed;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
- if ((ed->state & (ED_OPER | ED_UNLINK))
- && (lurb_priv->state != URB_DEL)) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- urb_finished = 1;
- }
- }
-
- if (ed->state != ED_NEW) {
- edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
- edTailP = ohci_cpu_to_le32 (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#endif
- if (usb_pipeint(pipe)) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipebulk(pipe))
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb_finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- stat = USB_ST_CRC_ERR;
- urb_finished = 1;
- break;
- }
- }
-#if 0
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-#endif
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#endif
-
- /* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
- ohci->slot_name,
- readl (&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
-
- ints = OHCI_INTR_WDH;
-
- } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
-
- } else if ((ints &= readl (®s->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- writel (OHCI_INTR_WDH, ®s->intrdisable);
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, ®s->intrenable);
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, ®s->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, ®s->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, ®s->intrenable);
- stat = 0xff;
- }
-
- writel (ints, ®s->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
- memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
-#if defined(CONFIG_440EP)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
-#endif
-
- gohci.flags = 0;
- gohci.slot_name = "ppc440";
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- return -1;
- }
-
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#endif
- ohci_inited = 1;
- urb_finished = 1;
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- /* init the device driver */
- usb_dev_init();
-#endif
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
- return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- __u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u16 hwPSW[MAXPSW];
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
- } roothub;
-} __attribute__((aligned(32)));
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status */
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct {
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- int state;
- unsigned long pipe;
- int actual_length;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma; */
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD + 1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *td_alloc(struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++) {
- if (ptd[i].usb_dev == NULL) {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void ed_free(struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
+++ /dev/null
-/*USB 1.1,2.0 device*/
-
-#include <common.h>
-#include <asm/processor.h>
-
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
-
-#include <usb.h>
-#include <asm/ppc4xx-uic.h>
-#include "usbdev.h"
-
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-
-int set_value = -1;
-
-void process_endpoints(unsigned short usb2d0_intrin)
-{
- /*will hold the packet received */
- struct usb_device_descriptor usb_device_packet;
- struct usb_configuration_descriptor usb_config_packet;
- struct usb_string_descriptor usb_string_packet;
- struct devrequest setup_packet;
- unsigned int *setup_packet_pt;
- unsigned char *packet_pt = NULL;
- int temp, temp1;
-
- int i;
-
- /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
-
- /*set usb address, seems to not work unless it is done in the next
- interrupt, so that is why it is done this way */
- if (set_value != -1)
- *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
-
- /*endpoint 1 */
- if (usb2d0_intrin & 0x01) {
- setup_packet_pt = (unsigned int *)&setup_packet;
-
- /*copy packet */
- setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
- setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
- temp = *(unsigned int *)USB2D0_FIFO_0;
- temp1 = *(unsigned int *)USB2D0_FIFO_0;
-
- /*do some swapping */
- setup_packet.value = swap_16(setup_packet.value);
- setup_packet.index = swap_16(setup_packet.index);
- setup_packet.length = swap_16(setup_packet.length);
-
- /*clear rx packet */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
-
- /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
- setup_packet.request, setup_packet.value,
- setup_packet.index, setup_packet.length, temp, temp1 ); */
-
- switch (setup_packet.request) {
- case USB_REQ_GET_DESCRIPTOR:
-
- switch (setup_packet.value >> 8) {
- case USB_DT_DEVICE:
- /*create packet */
- usb_device_packet.bLength = 18;
- usb_device_packet.bDescriptorType =
- USB_DT_DEVICE;
-#ifdef USB_2_0_DEVICE
- usb_device_packet.bcdUSB = swap_16(0x200);
-#else
- usb_device_packet.bcdUSB = swap_16(0x110);
-#endif
- usb_device_packet.bDeviceClass = 0xff;
- usb_device_packet.bDeviceSubClass = 0;
- usb_device_packet.bDeviceProtocol = 0;
- usb_device_packet.bMaxPacketSize0 = 32;
- usb_device_packet.idVendor = swap_16(1);
- usb_device_packet.idProduct = swap_16(2);
- usb_device_packet.bcdDevice = swap_16(0x300);
- usb_device_packet.iManufacturer = 1;
- usb_device_packet.iProduct = 1;
- usb_device_packet.iSerialNumber = 1;
- usb_device_packet.bNumConfigurations = 1;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_device_packet;
- break;
-
- case USB_DT_CONFIG:
- /*create packet */
- usb_config_packet.bLength = 9;
- usb_config_packet.bDescriptorType =
- USB_DT_CONFIG;
- usb_config_packet.wTotalLength = swap_16(25);
- usb_config_packet.bNumInterfaces = 1;
- usb_config_packet.bConfigurationValue = 1;
- usb_config_packet.iConfiguration = 0;
- usb_config_packet.bmAttributes = 0x40;
- usb_config_packet.bMaxPower = 0;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_config_packet;
- break;
-
- case USB_DT_STRING:
- /*create packet */
- usb_string_packet.bLength = 2;
- usb_string_packet.bDescriptorType =
- USB_DT_STRING;
- usb_string_packet.wData[0] = 0x0094;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_string_packet;
- break;
- }
-
- /*put packet in fifo */
- for (i = 0; i < (setup_packet.length); i++) {
- *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
- }
-
- /*give tx command */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
-
- break;
-
- case USB_REQ_SET_ADDRESS:
-
- /*copy usb address */
- set_value = setup_packet.value;
-
- break;
- }
-
- }
-}
-
-void process_other(unsigned char usb2d0_intrusb)
-{
-
- /*check for sof */
- if (usb2d0_intrusb & 0x08) {
- /*printf("{USB device} - sof detected\n"); */
- }
-
- /*check for reset */
- if (usb2d0_intrusb & 0x04) {
- /*printf("{USB device} - reset detected\n"); */
-
- /*copy usb address of zero, need to do this when usb reset */
- set_value = 0;
- }
-
- if (usb2d0_intrusb & 0x02) {
- /*printf("{USB device} - resume detected\n"); */
- }
-
- if (usb2d0_intrusb & 0x01) {
- /*printf("{USB device} - suspend detected\n"); */
- }
-}
-
-int usbInt(void)
-{
- /*Must read these 2 registers and use values to clear interrupts. If you
- do not read them then the interrupt will not be cleared. If you do not
- use the variable the optimizer will not do a read. */
- volatile unsigned short usb2d0_intrin =
- *(unsigned short *)USB2D0_INTRIN_16;
- volatile unsigned char usb2d0_intrusb =
- *(unsigned char *)USB2D0_INTRUSB_8;
-
- /*check if there was an endpoint interrupt */
- if (usb2d0_intrin != 0) {
- process_endpoints(usb2d0_intrin);
- }
-
- /*check for other interrupts */
- if (usb2d0_intrusb != 0) {
- process_other(usb2d0_intrusb);
- }
-
- return 0;
-}
-
-#if defined(CONFIG_440EPX)
-void usb_dev_init()
-{
- printf("USB 2.0 Device init\n");
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#else
-void usb_dev_init()
-{
-#ifdef USB_2_0_DEVICE
- printf("USB 2.0 Device init\n");
- /*select 2.0 device */
- mtsdr(SDR0_USB0, 0x0); /* 2.0 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-#else
- printf("USB 1.1 Device init\n");
- /*select 1.1 device */
- mtsdr(SDR0_USB0, 0x2); /* 1.1 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
-#endif
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#endif
-
-#endif /* CONFIG_440EP || CONFIG_440EPX */
+++ /dev/null
-#include <config.h>
-
-/*Common Registers*/
-#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
-#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
-#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
-#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
-#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
-#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
-#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
-#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
-#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
-#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
-#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
-
-/*Indexed Registers*/
-#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
-#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
-#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
-#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
-#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
-
-/*FIFOs*/
-#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
-#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
-#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
-#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
-
-void usb_dev_init(void);
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <asm/io.h>
-#include <asm/xilinx_irq.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
- debug("Xilinx PIC at 0x%8x\n", intc);
-
- /*
- * Disable all external interrupts until they are
- * explicitly requested.
- */
- out_be32((u32 *) IER, 0);
-
- /* Acknowledge any pending interrupts just in case. */
- out_be32((u32 *) IAR, 0xffffffff);
-
- /* Turn on the Master Enable. */
- out_be32((u32 *) MER, 0x3UL);
-
- return;
-}
-
-int xilinx_pic_irq_get(void)
-{
- u32 irq;
- irq = in_be32((u32 *) IVR);
-
- /* If no interrupt is pending then all bits of the IVR are set to 1. As
- * the IVR is as many bits wide as numbers of inputs are available.
- * Therefore, if all bits of the IVR are set to one, its content will
- * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
- */
- if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
- irq = -1; /* report no pending interrupt. */
-
- debug("get_irq: %d\n", irq);
- return (irq);
-}
-
-void pic_irq_enable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("enable: %d\n", irq);
- out_be32((u32 *) SIE, mask);
-}
-
-void pic_irq_disable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("disable: %d\n", irq);
- out_be32((u32 *) CIE, mask);
-}
-
-void pic_irq_ack(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("ack: %d\n", irq);
- out_be32((u32 *) IAR, mask);
-}
-
-void external_interrupt(struct pt_regs *regs)
-{
- int irq;
-
- irq = xilinx_pic_irq_get();
- if (irq < 0)
- return;
-
- interrupt_run_handler(irq);
-
- return;
-}
+++ /dev/null
-#ifndef _405GP_PCI_H
-#define _405GP_PCI_H
-
-#include <pci.h>
-
-/*----------------------------------------------------------------------------+
-| 405GP PCI core memory map defines.
-+----------------------------------------------------------------------------*/
-#define MIN_PCI_MEMADDR1 0x80000000
-#define MIN_PCI_MEMADDR2 0x00000000
-#define MIN_PLB_PCI_IOADDR 0xE8000000 /* PLB side of PCI I/O address space */
-#define MIN_PCI_PCI_IOADDR 0x00000000 /* PCI side of PCI I/O address space */
-#define MAX_PCI_DEVICES 32
-
-/*----------------------------------------------------------------------------+
-| Defines for the 405GP PCI Config address and data registers followed by
-| defines for the standard PCI device configuration header.
-+----------------------------------------------------------------------------*/
-#define PCICFGADR 0xEEC00000
-#define PCICFGDATA 0xEEC00004
-
-#define PCIBUSNUM 0x40 /* 405GP specific parameters */
-#define PCISUBBUSNUM 0x41
-#define PCIDISCOUNT 0x42
-#define PCIBRDGOPT1 0x4A
-#define PCIBRDGOPT2 0x60
-
-/*----------------------------------------------------------------------------+
-| Defines for 405GP PCI Master local configuration regs.
-+----------------------------------------------------------------------------*/
-#define PMM0LA 0xEF400000
-#define PMM0MA 0xEF400004
-#define PMM0PCILA 0xEF400008
-#define PMM0PCIHA 0xEF40000C
-#define PMM1LA 0xEF400010
-#define PMM1MA 0xEF400014
-#define PMM1PCILA 0xEF400018
-#define PMM1PCIHA 0xEF40001C
-#define PMM2LA 0xEF400020
-#define PMM2MA 0xEF400024
-#define PMM2PCILA 0xEF400028
-#define PMM2PCIHA 0xEF40002C
-
-/*----------------------------------------------------------------------------+
-| Defines for 405GP PCI Target local configuration regs.
-+----------------------------------------------------------------------------*/
-#define PTM1MS 0xEF400030
-#define PTM1LA 0xEF400034
-#define PTM2MS 0xEF400038
-#define PTM2LA 0xEF40003C
-
-#define PCIDEVID_405GP 0x0
-
-void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev);
-int pci_arbiter_enabled(void);
-int __pci_pre_init(struct pci_controller *hose);
-void __pci_target_init(struct pci_controller *hose);
-void __pci_master_init(struct pci_controller *hose);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __4XX_PCIE_H
-#define __4XX_PCIE_H
-
-#include <ppc4xx.h>
-#include <pci.h>
-
-#define DCRN_SDR0_CFGADDR 0x00e
-#define DCRN_SDR0_CFGDATA 0x00f
-
-#if defined(CONFIG_440SPE)
-#define CONFIG_SYS_PCIE_NR_PORTS 3
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
-
-#define DCRN_PCIE0_BASE 0x100
-#define DCRN_PCIE1_BASE 0x120
-#define DCRN_PCIE2_BASE 0x140
-
-#define PCIE0_SDR 0x300
-#define PCIE1_SDR 0x340
-#define PCIE2_SDR 0x370
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define CONFIG_SYS_PCIE_NR_PORTS 2
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
-
-#define DCRN_PCIE0_BASE 0x100
-#define DCRN_PCIE1_BASE 0x120
-
-#define PCIE0_SDR 0x300
-#define PCIE1_SDR 0x340
-#endif
-
-#if defined(CONFIG_405EX)
-#define CONFIG_SYS_PCIE_NR_PORTS 2
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x00000000
-
-#define DCRN_PCIE0_BASE 0x040
-#define DCRN_PCIE1_BASE 0x060
-
-#define PCIE0_SDR 0x400
-#define PCIE1_SDR 0x440
-#endif
-
-#define PCIE0 DCRN_PCIE0_BASE
-#define PCIE1 DCRN_PCIE1_BASE
-#define PCIE2 DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base) (base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base) (base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base) (base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base) (base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base) (base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base) (base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09)
-#define DCRN_PEGPL_REGBAH(base) (base + 0x12)
-#define DCRN_PEGPL_REGBAL(base) (base + 0x13)
-#define DCRN_PEGPL_REGMSK(base) (base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base) (base + 0x15)
-#define DCRN_PEGPL_CFG(base) (base + 0x16)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1 0x03a0
-#define PESDR0_PLLLCT2 0x03a1
-#define PESDR0_PLLLCT3 0x03a2
-
-/* common regs, at for all 4xx with PCIe core */
-#define SDRN_PESDR_UTLSET1(n) (sdr_base(n) + 0x00)
-#define SDRN_PESDR_UTLSET2(n) (sdr_base(n) + 0x01)
-#define SDRN_PESDR_DLPSET(n) (sdr_base(n) + 0x02)
-#define SDRN_PESDR_LOOP(n) (sdr_base(n) + 0x03)
-#define SDRN_PESDR_RCSSET(n) (sdr_base(n) + 0x04)
-#define SDRN_PESDR_RCSSTS(n) (sdr_base(n) + 0x05)
-
-#if defined(CONFIG_440SPE)
-#define SDRN_PESDR_HSSL0SET1(n) (sdr_base(n) + 0x06)
-#define SDRN_PESDR_HSSL0SET2(n) (sdr_base(n) + 0x07)
-#define SDRN_PESDR_HSSL0STS(n) (sdr_base(n) + 0x08)
-#define SDRN_PESDR_HSSL1SET1(n) (sdr_base(n) + 0x09)
-#define SDRN_PESDR_HSSL1SET2(n) (sdr_base(n) + 0x0a)
-#define SDRN_PESDR_HSSL1STS(n) (sdr_base(n) + 0x0b)
-#define SDRN_PESDR_HSSL2SET1(n) (sdr_base(n) + 0x0c)
-#define SDRN_PESDR_HSSL2SET2(n) (sdr_base(n) + 0x0d)
-#define SDRN_PESDR_HSSL2STS(n) (sdr_base(n) + 0x0e)
-#define SDRN_PESDR_HSSL3SET1(n) (sdr_base(n) + 0x0f)
-#define SDRN_PESDR_HSSL3SET2(n) (sdr_base(n) + 0x10)
-#define SDRN_PESDR_HSSL3STS(n) (sdr_base(n) + 0x11)
-
-#define PESDR0_UTLSET1 0x0300
-#define PESDR0_UTLSET2 0x0301
-#define PESDR0_DLPSET 0x0302
-#define PESDR0_LOOP 0x0303
-#define PESDR0_RCSSET 0x0304
-#define PESDR0_RCSSTS 0x0305
-#define PESDR0_HSSL0SET1 0x0306
-#define PESDR0_HSSL0SET2 0x0307
-#define PESDR0_HSSL0STS 0x0308
-#define PESDR0_HSSL1SET1 0x0309
-#define PESDR0_HSSL1SET2 0x030a
-#define PESDR0_HSSL1STS 0x030b
-#define PESDR0_HSSL2SET1 0x030c
-#define PESDR0_HSSL2SET2 0x030d
-#define PESDR0_HSSL2STS 0x030e
-#define PESDR0_HSSL3SET1 0x030f
-#define PESDR0_HSSL3SET2 0x0310
-#define PESDR0_HSSL3STS 0x0311
-#define PESDR0_HSSL4SET1 0x0312
-#define PESDR0_HSSL4SET2 0x0313
-#define PESDR0_HSSL4STS 0x0314
-#define PESDR0_HSSL5SET1 0x0315
-#define PESDR0_HSSL5SET2 0x0316
-#define PESDR0_HSSL5STS 0x0317
-#define PESDR0_HSSL6SET1 0x0318
-#define PESDR0_HSSL6SET2 0x0319
-#define PESDR0_HSSL6STS 0x031a
-#define PESDR0_HSSL7SET1 0x031b
-#define PESDR0_HSSL7SET2 0x031c
-#define PESDR0_HSSL7STS 0x031d
-#define PESDR0_HSSCTLSET 0x031e
-#define PESDR0_LANE_ABCD 0x031f
-#define PESDR0_LANE_EFGH 0x0320
-
-#define PESDR1_UTLSET1 0x0340
-#define PESDR1_UTLSET2 0x0341
-#define PESDR1_DLPSET 0x0342
-#define PESDR1_LOOP 0x0343
-#define PESDR1_RCSSET 0x0344
-#define PESDR1_RCSSTS 0x0345
-#define PESDR1_HSSL0SET1 0x0346
-#define PESDR1_HSSL0SET2 0x0347
-#define PESDR1_HSSL0STS 0x0348
-#define PESDR1_HSSL1SET1 0x0349
-#define PESDR1_HSSL1SET2 0x034a
-#define PESDR1_HSSL1STS 0x034b
-#define PESDR1_HSSL2SET1 0x034c
-#define PESDR1_HSSL2SET2 0x034d
-#define PESDR1_HSSL2STS 0x034e
-#define PESDR1_HSSL3SET1 0x034f
-#define PESDR1_HSSL3SET2 0x0350
-#define PESDR1_HSSL3STS 0x0351
-#define PESDR1_HSSCTLSET 0x0352
-#define PESDR1_LANE_ABCD 0x0353
-
-#define PESDR2_UTLSET1 0x0370
-#define PESDR2_UTLSET2 0x0371
-#define PESDR2_DLPSET 0x0372
-#define PESDR2_LOOP 0x0373
-#define PESDR2_RCSSET 0x0374
-#define PESDR2_RCSSTS 0x0375
-#define PESDR2_HSSL0SET1 0x0376
-#define PESDR2_HSSL0SET2 0x0377
-#define PESDR2_HSSL0STS 0x0378
-#define PESDR2_HSSL1SET1 0x0379
-#define PESDR2_HSSL1SET2 0x037a
-#define PESDR2_HSSL1STS 0x037b
-#define PESDR2_HSSL2SET1 0x037c
-#define PESDR2_HSSL2SET2 0x037d
-#define PESDR2_HSSL2STS 0x037e
-#define PESDR2_HSSL3SET1 0x037f
-#define PESDR2_HSSL3SET2 0x0380
-#define PESDR2_HSSL3STS 0x0381
-#define PESDR2_HSSCTLSET 0x0382
-#define PESDR2_LANE_ABCD 0x0383
-
-#elif defined(CONFIG_405EX)
-
-#define SDRN_PESDR_PHYSET1(n) (sdr_base(n) + 0x06)
-#define SDRN_PESDR_PHYSET2(n) (sdr_base(n) + 0x07)
-#define SDRN_PESDR_BIST(n) (sdr_base(n) + 0x08)
-#define SDRN_PESDR_LPB(n) (sdr_base(n) + 0x0b)
-#define SDRN_PESDR_PHYSTA(n) (sdr_base(n) + 0x0c)
-
-#define PESDR0_UTLSET1 0x0400
-#define PESDR0_UTLSET2 0x0401
-#define PESDR0_DLPSET 0x0402
-#define PESDR0_LOOP 0x0403
-#define PESDR0_RCSSET 0x0404
-#define PESDR0_RCSSTS 0x0405
-#define PESDR0_PHYSET1 0x0406
-#define PESDR0_PHYSET2 0x0407
-#define PESDR0_BIST 0x0408
-#define PESDR0_LPB 0x040B
-#define PESDR0_PHYSTA 0x040C
-
-#define PESDR1_UTLSET1 0x0440
-#define PESDR1_UTLSET2 0x0441
-#define PESDR1_DLPSET 0x0442
-#define PESDR1_LOOP 0x0443
-#define PESDR1_RCSSET 0x0444
-#define PESDR1_RCSSTS 0x0445
-#define PESDR1_PHYSET1 0x0446
-#define PESDR1_PHYSET2 0x0447
-#define PESDR1_BIST 0x0448
-#define PESDR1_LPB 0x044B
-#define PESDR1_PHYSTA 0x044C
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define PESDR0_L0BIST 0x0308 /* PE0 L0 built in self test */
-#define PESDR0_L0BISTSTS 0x0309 /* PE0 L0 built in self test status */
-#define PESDR0_L0CDRCTL 0x030A /* PE0 L0 CDR control */
-#define PESDR0_L0DRV 0x030B /* PE0 L0 drive */
-#define PESDR0_L0REC 0x030C /* PE0 L0 receiver */
-#define PESDR0_L0LPB 0x030D /* PE0 L0 loopback */
-#define PESDR0_L0CLK 0x030E /* PE0 L0 clocking */
-#define PESDR0_PHY_CTL_RST 0x030F /* PE0 PHY control reset */
-#define PESDR0_RSTSTA 0x0310 /* PE0 reset status */
-#define PESDR0_OBS 0x0311 /* PE0 observation register */
-#define PESDR0_L0ERRC 0x0320 /* PE0 L0 error counter */
-
-#define PESDR1_L0BIST 0x0348 /* PE1 L0 built in self test */
-#define PESDR1_L1BIST 0x0349 /* PE1 L1 built in self test */
-#define PESDR1_L2BIST 0x034A /* PE1 L2 built in self test */
-#define PESDR1_L3BIST 0x034B /* PE1 L3 built in self test */
-#define PESDR1_L0BISTSTS 0x034C /* PE1 L0 built in self test status */
-#define PESDR1_L1BISTSTS 0x034D /* PE1 L1 built in self test status */
-#define PESDR1_L2BISTSTS 0x034E /* PE1 L2 built in self test status */
-#define PESDR1_L3BISTSTS 0x034F /* PE1 L3 built in self test status */
-#define PESDR1_L0CDRCTL 0x0350 /* PE1 L0 CDR control */
-#define PESDR1_L1CDRCTL 0x0351 /* PE1 L1 CDR control */
-#define PESDR1_L2CDRCTL 0x0352 /* PE1 L2 CDR control */
-#define PESDR1_L3CDRCTL 0x0353 /* PE1 L3 CDR control */
-#define PESDR1_L0DRV 0x0354 /* PE1 L0 drive */
-#define PESDR1_L1DRV 0x0355 /* PE1 L1 drive */
-#define PESDR1_L2DRV 0x0356 /* PE1 L2 drive */
-#define PESDR1_L3DRV 0x0357 /* PE1 L3 drive */
-#define PESDR1_L0REC 0x0358 /* PE1 L0 receiver */
-#define PESDR1_L1REC 0x0359 /* PE1 L1 receiver */
-#define PESDR1_L2REC 0x035A /* PE1 L2 receiver */
-#define PESDR1_L3REC 0x035B /* PE1 L3 receiver */
-#define PESDR1_L0LPB 0x035C /* PE1 L0 loopback */
-#define PESDR1_L1LPB 0x035D /* PE1 L1 loopback */
-#define PESDR1_L2LPB 0x035E /* PE1 L2 loopback */
-#define PESDR1_L3LPB 0x035F /* PE1 L3 loopback */
-#define PESDR1_L0CLK 0x0360 /* PE1 L0 clocking */
-#define PESDR1_L1CLK 0x0361 /* PE1 L1 clocking */
-#define PESDR1_L2CLK 0x0362 /* PE1 L2 clocking */
-#define PESDR1_L3CLK 0x0363 /* PE1 L3 clocking */
-#define PESDR1_PHY_CTL_RST 0x0364 /* PE1 PHY control reset */
-#define PESDR1_RSTSTA 0x0365 /* PE1 reset status */
-#define PESDR1_OBS 0x0366 /* PE1 observation register */
-#define PESDR1_L0ERRC 0x0368 /* PE1 L0 error counter */
-#define PESDR1_L1ERRC 0x0369 /* PE1 L1 error counter */
-#define PESDR1_L2ERRC 0x036A /* PE1 L2 error counter */
-#define PESDR1_L3ERRC 0x036B /* PE1 L3 error counter */
-#define PESDR0_IHS1 0x036C /* PE interrupt handler interfact setting 1 */
-#define PESDR0_IHS2 0x036D /* PE interrupt handler interfact setting 2 */
-
-#endif
-
-/* SDR Bit Mappings */
-#define PESDRx_RCSSET_HLDPLB 0x10000000
-#define PESDRx_RCSSET_RSTGU 0x01000000
-#define PESDRx_RCSSET_RDY 0x00100000
-#define PESDRx_RCSSET_RSTDL 0x00010000
-#define PESDRx_RCSSET_RSTPYN 0x00001000
-
-#define PESDRx_RCSSTS_PLBIDL 0x10000000
-#define PESDRx_RCSSTS_HRSTRQ 0x01000000
-#define PESDRx_RCSSTS_PGRST 0x00100000
-#define PESDRx_RCSSTS_VC0ACT 0x00010000
-#define PESDRx_RCSSTS_BMEN 0x00000100
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBCTL 0x00
-#define PEUTL_PBBSZ 0x20
-#define PEUTL_OPDBSZ 0x68
-#define PEUTL_IPHBSZ 0x70
-#define PEUTL_IPDBSZ 0x78
-#define PEUTL_OUTTR 0x90
-#define PEUTL_INTR 0x98
-#define PEUTL_PCTL 0xa0
-#define PEUTL_RCSTA 0xb0
-#define PEUTL_RCIRQEN 0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA 0x210
-#define PECFG_BAR0HMPA 0x214
-#define PECFG_BAR1MPA 0x218
-#define PECFG_BAR2LMPA 0x220
-#define PECFG_BAR2HMPA 0x224
-
-#define PECFG_PIMEN 0x33c
-#define PECFG_PIM0LAL 0x340
-#define PECFG_PIM0LAH 0x344
-#define PECFG_PIM1LAL 0x348
-#define PECFG_PIM1LAH 0x34c
-#define PECFG_PIM01SAL 0x350
-#define PECFG_PIM01SAH 0x354
-
-#define PECFG_POM0LAL 0x380
-#define PECFG_POM0LAH 0x384
-
-#define SDR_READ(offset) ({\
- mtdcr(DCRN_SDR0_CFGADDR, offset); \
- mfdcr(DCRN_SDR0_CFGDATA);})
-
-#define SDR_WRITE(offset, data) ({\
- mtdcr(DCRN_SDR0_CFGADDR, offset); \
- mtdcr(DCRN_SDR0_CFGDATA,data);})
-
-#define GPL_DMER_MASK_DISA 0x02000000
-
-#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
-#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
-
-/*
- * Prototypes
- */
-int ppc4xx_init_pcie(void);
-int ppc4xx_init_pcie_rootport(int port);
-int ppc4xx_init_pcie_endport(int port);
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port);
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port);
-int pcie_hose_scan(struct pci_controller *hose, int bus);
-
-/*
- * Function to determine root port or endport from env variable.
- */
-static inline int is_end_point(int port)
-{
- char s[10], *tk;
- char *pcie_mode = getenv("pcie_mode");
-
- if (pcie_mode == NULL)
- return 0;
-
- strcpy(s, pcie_mode);
- tk = strtok(s, ":");
-
- switch (port) {
- case 0:
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
-
- case 1:
- tk = strtok(NULL, ":");
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
-
- case 2:
- tk = strtok(NULL, ":");
- if (tk != NULL)
- tk = strtok(NULL, ":");
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
- }
-
- return 0;
-}
-
-static inline void mdelay(int n)
-{
- u32 ms = n;
-
- while (ms--)
- udelay(1000);
-}
-
-#if defined(PCIE0_SDR)
-static inline u32 sdr_base(int port)
-{
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return PCIE0_SDR;
- case 1:
- return PCIE1_SDR;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- return PCIE2_SDR;
-#endif
- }
-}
-#endif /* defined(PCIE0_SDR) */
-
-#endif /* __4XX_PCIE_H */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: 5xx_immap.h
- *
- * Discription: MPC555 Internal Memory Map
- *
- */
-
-#ifndef __IMMAP_5XX__
-#define __IMMAP_5XX__
-
-/* System Configuration Registers.
-*/
-typedef struct sys_conf {
- uint sc_siumcr;
- uint sc_sypcr;
- char res1[6];
- ushort sc_swsr;
- uint sc_sipend;
- uint sc_simask;
- uint sc_siel;
- uint sc_sivec;
- uint sc_tesr;
- uint sc_sgpiodt1;
- uint sc_sgpiodt2;
- uint sc_sgpiocr;
- uint sc_emcr;
- uint sc_res1aa;
- uint sc_res1ab;
- uint sc_pdmcr;
- char res3[192];
-} sysconf5xx_t;
-
-
-/* Memory Controller Registers.
-*/
-typedef struct mem_ctlr {
- uint memc_br0;
- uint memc_or0;
- uint memc_br1;
- uint memc_or1;
- uint memc_br2;
- uint memc_or2;
- uint memc_br3;
- uint memc_or3;
- char res1[32];
- uint memc_dmbr;
- uint memc_dmor;
- char res2[48];
- ushort memc_mstat;
- ushort memc_res4a;
- char res3[132];
-} memctl5xx_t;
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- ushort sit_tbscr;
- char res1[2];
- uint sit_tbref0;
- uint sit_tbref1;
- char res2[20];
- ushort sit_rtcsc;
- char res3[2];
- uint sit_rtc;
- uint sit_rtsec;
- uint sit_rtcal;
- char res4[16];
- ushort sit_piscr;
- char res5[2];
- uint sit_pitc;
- uint sit_pitr;
- char res6[52];
-} sit5xx_t;
-
-/* Clocks and Reset
-*/
-typedef struct clk_and_reset {
- uint car_sccr;
- uint car_plprcr;
- ushort car_rsr;
- ushort car_res7a;
- ushort car_colir;
- ushort car_res7b;
- ushort car_vsrmcr;
- ushort car_res7c;
- char res1[108];
-
-} car5xx_t;
-
-#define TBSCR_TBE ((ushort)0x0001)
-
-/* System Integration Timer Keys
-*/
-typedef struct sitk {
- uint sitk_tbscrk;
- uint sitk_tbref0k;
- uint sitk_tbref1k;
- uint sitk_tbk;
- char res1[16];
- uint sitk_rtcsck;
- uint sitk_rtck;
- uint sitk_rtseck;
- uint sitk_rtcalk;
- char res2[16];
- uint sitk_piscrk;
- uint sitk_pitck;
- char res3[56];
-} sitk5xx_t;
-
-/* Clocks and Reset Keys.
-*/
-typedef struct cark {
- uint cark_sccrk;
- uint cark_plprcrk;
- uint cark_rsrk;
- char res1[1140];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY ((unsigned int)0x55ccaa33)
-
-/* Flash Configuration
-*/
-typedef struct fl {
- uint fl_cmfmcr;
- uint fl_cmftst;
- uint fl_cmfctl;
- char res1[52];
-} fl5xx_t;
-
-/* Dpram Control
-*/
-typedef struct dprc {
- ushort dprc_dptmcr;
- ushort dprc_ramtst;
- ushort dprc_rambar;
- ushort dprc_misrh;
- ushort dprc_misrl;
- ushort dprc_miscnt;
-} dprc5xx_t;
-
-/* Time Processor Unit
-*/
-typedef struct tpu {
- ushort tpu_tpumcr;
- ushort tpu_tcr;
- ushort tpu_dscr;
- ushort tpu_dssr;
- ushort tpu_ticr;
- ushort tpu_cier;
- ushort tpu_cfsr0;
- ushort tpu_cfsr1;
- ushort tpu_cfsr2;
- ushort tpu_cfsr3;
- ushort tpu_hsqr0;
- ushort tpu_hsqr1;
- ushort tpu_hsrr0;
- ushort tpu_hsrr1;
- ushort tpu_cpr0;
- ushort tpu_cpr1;
- ushort tpu_cisr;
- ushort tpu_lr;
- ushort tpu_sglr;
- ushort tpu_dcnr;
- ushort tpu_tpumcr2;
- ushort tpu_tpumcr3;
- ushort tpu_isdr;
- ushort tpu_iscr;
- char res1[208];
- char tpu[16][16];
- char res2[512];
-} tpu5xx_t;
-
-/* QADC
-*/
-typedef struct qadc {
- ushort qadc_64mcr;
- ushort qadc_64test;
- ushort qadc_64int;
- u_char qadc_portqa;
- u_char qadc_portqb;
- ushort qadc_ddrqa;
- ushort qadc_qacr0;
- ushort qadc_qacr1;
- ushort qadc_qacr2;
- ushort qadc_qasr0;
- ushort qadc_qasr1;
- char res1[492];
- /* command convertion word table */
- ushort qadc_ccw[64];
- /* result word table, unsigned right justified */
- ushort qadc_rjurr[64];
- /* result word table, signed left justified */
- ushort qadc_ljsrr[64];
- /* result word table, unsigned left justified */
- ushort qadc_ljurr[64];
-} qadc5xx_t;
-
-/* QSMCM
-*/
-typedef struct qsmcm {
- ushort qsmcm_qsmcr;
- ushort qsmcm_qtest;
- ushort qsmcm_qdsci_il;
- ushort qsmcm_qspi_il;
- ushort qsmcm_scc1r0;
- ushort qsmcm_scc1r1;
- ushort qsmcm_sc1sr;
- ushort qsmcm_sc1dr;
- char res1[2];
- char res2[2];
- ushort qsmcm_portqs;
- u_char qsmcm_pqspar;
- u_char qsmcm_ddrqs;
- ushort qsmcm_spcr0;
- ushort qsmcm_spcr1;
- ushort qsmcm_spcr2;
- u_char qsmcm_spcr3;
- u_char qsmcm_spsr;
- ushort qsmcm_scc2r0;
- ushort qsmcm_scc2r1;
- ushort qsmcm_sc2sr;
- ushort qsmcm_sc2dr;
- ushort qsmcm_qsci1cr;
- ushort qsmcm_qsci1sr;
- ushort qsmcm_sctq[16];
- ushort qsmcm_scrq[16];
- char res3[212];
- ushort qsmcm_recram[32];
- ushort qsmcm_tranram[32];
- u_char qsmcm_comdram[32];
- char res[3616];
-} qsmcm5xx_t;
-
-
-/* MIOS
-*/
-
-typedef struct mios {
- ushort mios_mpwmsm0perr; /* mpwmsm0 */
- ushort mios_mpwmsm0pulr;
- ushort mios_mpwmsm0cntr;
- ushort mios_mpwmsm0scr;
- ushort mios_mpwmsm1perr; /* mpwmsm1 */
- ushort mios_mpwmsm1pulr;
- ushort mios_mpwmsm1cntr;
- ushort mios_mpwmsm1scr;
- ushort mios_mpwmsm2perr; /* mpwmsm2 */
- ushort mios_mpwmsm2pulr;
- ushort mios_mpwmsm2cntr;
- ushort mios_mpwmsm2scr;
- ushort mios_mpwmsm3perr; /* mpwmsm3 */
- ushort mios_mpwmsm3pulr;
- ushort mios_mpwmsm3cntr;
- ushort mios_mpwmsm3scr;
- char res1[16];
- ushort mios_mmcsm6cnt; /* mmcsm6 */
- ushort mios_mmcsm6mlr;
- ushort mios_mmcsm6scrd, mmcsm6scr;
- char res2[32];
- ushort mios_mdasm11ar; /* mdasm11 */
- ushort mios_mdasm11br;
- ushort mios_mdasm11scrd, mdasm11scr;
- ushort mios_mdasm12ar; /* mdasm12 */
- ushort mios_mdasm12br;
- ushort mios_mdasm12scrd, mdasm12scr;
- ushort mios_mdasm13ar; /* mdasm13 */
- ushort mios_mdasm13br;
- ushort mios_mdasm13scrd, mdasm13scr;
- ushort mios_mdasm14ar; /* mdasm14 */
- ushort mios_mdasm14br;
- ushort mios_mdasm14scrd, mdasm14scr;
- ushort mios_mdasm15ar; /* mdasm15 */
- ushort mios_mdasm15br;
- ushort mios_mdasm15scrd, mdasm15scr;
- ushort mios_mpwmsm16perr; /* mpwmsm16 */
- ushort mios_mpwmsm16pulr;
- ushort mios_mpwmsm16cntr;
- ushort mios_mpwmsm16scr;
- ushort mios_mpwmsm17perr; /* mpwmsm17 */
- ushort mios_mpwmsm17pulr;
- ushort mios_mpwmsm17cntr;
- ushort mios_mpwmsm17scr;
- ushort mios_mpwmsm18perr; /* mpwmsm18 */
- ushort mios_mpwmsm18pulr;
- ushort mios_mpwmsm18cntr;
- ushort mios_mpwmsm18scr;
- ushort mios_mpwmsm19perr; /* mpwmsm19 */
- ushort mios_mpwmsm19pulr;
- ushort mios_mpwmsm19cntr;
- ushort mios_mpwmsm19scr;
- char res3[16];
- ushort mios_mmcsm22cnt; /* mmcsm22 */
- ushort mios_mmcsm22mlr;
- ushort mios_mmcsm22scrd, mmcsm22scr;
- char res4[32];
- ushort mios_mdasm27ar; /* mdasm27 */
- ushort mios_mdasm27br;
- ushort mios_mdasm27scrd, mdasm27scr;
- ushort mios_mdasm28ar; /*mdasm28 */
- ushort mios_mdasm28br;
- ushort mios_mdasm28scrd, mdasm28scr;
- ushort mios_mdasm29ar; /* mdasm29 */
- ushort mios_mdasm29br;
- ushort mios_mdasm29scrd, mdasm29scr;
- ushort mios_mdasm30ar; /* mdasm30 */
- ushort mios_mdasm30br;
- ushort mios_mdasm30scrd, mdasm30scr;
- ushort mios_mdasm31ar; /* mdasm31 */
- ushort mios_mdasm31br;
- ushort mios_mdasm31scrd, mdasm31scr;
- ushort mios_mpiosm32dr;
- ushort mios_mpiosm32ddr;
- char res5[1788];
- ushort mios_mios1tpcr;
- char mios_res13[2];
- ushort mios_mios1vnr;
- ushort mios_mios1mcr;
- char res6[12];
- ushort mios_res42z;
- ushort mios_mcpsmscr;
- char res7[1000];
- ushort mios_mios1sr0;
- char res12[2];
- ushort mios_mios1er0;
- ushort mios_mios1rpr0;
- char res8[40];
- ushort mios_mios1lvl0;
- char res9[14];
- ushort mios_mios1sr1;
- char res10[2];
- ushort mios_mios1er1;
- ushort mios_mios1rpr1;
- char res11[40];
- ushort mios_mios1lvl1;
- char res13[1038];
-} mios5xx_t;
-
-/* Toucan Module
-*/
-typedef struct tcan {
- ushort tcan_tcnmcr;
- ushort tcan_cantcr;
- ushort tcan_canicr;
- u_char tcan_canctrl0;
- u_char tcan_canctrl1;
- u_char tcan_presdiv;
- u_char tcan_canctrl2;
- ushort tcan_timer;
- char res1[4];
- ushort tcan_rxgmskhi;
- ushort tcan_rxgmsklo;
- ushort tcan_rx14mskhi;
- ushort tcan_rx14msklo;
- ushort tcan_rx15mskhi;
- ushort tcan_rx15msklo;
- char res2[4];
- ushort tcan_estat;
- ushort tcan_imask;
- ushort tcan_iflag;
- u_char tcan_rxectr;
- u_char tcan_txectr;
- char res3[88];
- struct {
- ushort scr;
- ushort id_high;
- ushort id_low;
- u_char data[8];
- char res4[2];
- } tcan_mbuff[16];
- char res5[640];
-} tcan5xx_t;
-
-/* UIMB
-*/
-typedef struct uimb {
- uint uimb_umcr;
- char res1[12];
- uint uimb_utstcreg;
- char res2[12];
- uint uimb_uipend;
-} uimb5xx_t;
-
-
-/* Internal Memory Map MPC555
-*/
-typedef struct immap {
- char res1[262144]; /* CMF Flash A 256 Kbytes */
- char res2[196608]; /* CMF Flash B 192 Kbytes */
- char res3[2670592]; /* Reserved for Flash */
- sysconf5xx_t im_siu_conf; /* SIU Configuration */
- memctl5xx_t im_memctl; /* Memory Controller */
- sit5xx_t im_sit; /* System Integration Timers */
- car5xx_t im_clkrst; /* Clocks and Reset */
- sitk5xx_t im_sitk; /* System Integration Timer Keys*/
- cark8xx_t im_clkrstk; /* Clocks and Resert Keys */
- fl5xx_t im_fla; /* Flash Module A */
- fl5xx_t im_flb; /* Flash Module B */
- char res4[14208]; /* Reserved for SIU */
- dprc5xx_t im_dprc; /* Dpram Control Register */
- char res5[8180]; /* Reserved */
- char dptram[6144]; /* Dptram */
- char res6[2048]; /* Reserved */
- tpu5xx_t im_tpua; /* Time Proessing Unit A */
- tpu5xx_t im_tpub; /* Time Processing Unit B */
- qadc5xx_t im_qadca; /* QADC A */
- qadc5xx_t im_qadcb; /* QADC B */
- qsmcm5xx_t im_qsmcm; /* SCI and SPI */
- mios5xx_t im_mios; /* MIOS */
- tcan5xx_t im_tcana; /* Toucan A */
- tcan5xx_t im_tcanb; /* Toucan B */
- char res7[1792]; /* Reserved */
- uimb5xx_t im_uimb; /* UIMB */
-} immap_t;
-
-#endif /* __IMMAP_5XX__ */
+++ /dev/null
-
-/*
- * MPC8xx Internal Memory Map
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * The I/O on the MPC860 is comprised of blocks of special registers
- * and the dual port ram for the Communication Processor Module.
- * Within this space are functional units such as the SIU, memory
- * controller, system timers, and other control functions. It is
- * a combination that I found difficult to separate into logical
- * functional files.....but anyone else is welcome to try. -- Dan
- */
-#ifndef __IMMAP_8XX__
-#define __IMMAP_8XX__
-
-/* System configuration registers.
-*/
-typedef struct sys_conf {
- uint sc_siumcr;
- uint sc_sypcr;
- uint sc_swt;
- char res1[2];
- ushort sc_swsr;
- uint sc_sipend;
- uint sc_simask;
- uint sc_siel;
- uint sc_sivec;
- uint sc_tesr;
- char res2[0xc];
- uint sc_sdcr;
- char res3[0x4c];
-} sysconf8xx_t;
-
-/* PCMCIA configuration registers.
-*/
-typedef struct pcmcia_conf {
- uint pcmc_pbr0;
- uint pcmc_por0;
- uint pcmc_pbr1;
- uint pcmc_por1;
- uint pcmc_pbr2;
- uint pcmc_por2;
- uint pcmc_pbr3;
- uint pcmc_por3;
- uint pcmc_pbr4;
- uint pcmc_por4;
- uint pcmc_pbr5;
- uint pcmc_por5;
- uint pcmc_pbr6;
- uint pcmc_por6;
- uint pcmc_pbr7;
- uint pcmc_por7;
- char res1[0x20];
- uint pcmc_pgcra;
- uint pcmc_pgcrb;
- uint pcmc_pscr;
- char res2[4];
- uint pcmc_pipr;
- char res3[4];
- uint pcmc_per;
- char res4[4];
-} pcmconf8xx_t;
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- uint memc_br0;
- uint memc_or0;
- uint memc_br1;
- uint memc_or1;
- uint memc_br2;
- uint memc_or2;
- uint memc_br3;
- uint memc_or3;
- uint memc_br4;
- uint memc_or4;
- uint memc_br5;
- uint memc_or5;
- uint memc_br6;
- uint memc_or6;
- uint memc_br7;
- uint memc_or7;
- char res1[0x24];
- uint memc_mar;
- uint memc_mcr;
- char res2[4];
- uint memc_mamr;
- uint memc_mbmr;
- ushort memc_mstat;
- ushort memc_mptpr;
- uint memc_mdr;
- char res3[0x80];
-} memctl8xx_t;
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- ushort sit_tbscr;
- char res0[0x02];
- uint sit_tbreff0;
- uint sit_tbreff1;
- char res1[0x14];
- ushort sit_rtcsc;
- char res2[0x02];
- uint sit_rtc;
- uint sit_rtsec;
- uint sit_rtcal;
- char res3[0x10];
- ushort sit_piscr;
- char res4[2];
- uint sit_pitc;
- uint sit_pitr;
- char res5[0x34];
-} sit8xx_t;
-
-#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
-#define TBSCR_REFA ((ushort)0x0080)
-#define TBSCR_REFB ((ushort)0x0040)
-#define TBSCR_REFAE ((ushort)0x0008)
-#define TBSCR_REFBE ((ushort)0x0004)
-#define TBSCR_TBF ((ushort)0x0002)
-#define TBSCR_TBE ((ushort)0x0001)
-
-#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
-#define RTCSC_SEC ((ushort)0x0080)
-#define RTCSC_ALR ((ushort)0x0040)
-#define RTCSC_38K ((ushort)0x0010)
-#define RTCSC_SIE ((ushort)0x0008)
-#define RTCSC_ALE ((ushort)0x0004)
-#define RTCSC_RTF ((ushort)0x0002)
-#define RTCSC_RTE ((ushort)0x0001)
-
-#define PISCR_PIRQ_MASK ((ushort)0xff00)
-#define PISCR_PS ((ushort)0x0080)
-#define PISCR_PIE ((ushort)0x0004)
-#define PISCR_PTF ((ushort)0x0002)
-#define PISCR_PTE ((ushort)0x0001)
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- uint car_sccr;
- uint car_plprcr;
- uint car_rsr;
- char res[0x74]; /* Reserved area */
-} car8xx_t;
-
-/* System Integration Timers keys.
-*/
-typedef struct sitk {
- uint sitk_tbscrk;
- uint sitk_tbreff0k;
- uint sitk_tbreff1k;
- uint sitk_tbk;
- char res1[0x10];
- uint sitk_rtcsck;
- uint sitk_rtck;
- uint sitk_rtseck;
- uint sitk_rtcalk;
- char res2[0x10];
- uint sitk_piscrk;
- uint sitk_pitck;
- char res3[0x38];
-} sitk8xx_t;
-
-/* Clocks and reset keys.
-*/
-typedef struct cark {
- uint cark_sccrk;
- uint cark_plprcrk;
- uint cark_rsrk;
- char res[0x474];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY ((unsigned int)0x55ccaa33)
-
-/* Video interface. MPC823 Only.
-*/
-typedef struct vid823 {
- ushort vid_vccr;
- ushort res1;
- u_char vid_vsr;
- u_char res2;
- u_char vid_vcmr;
- u_char res3;
- uint vid_vbcb;
- uint res4;
- uint vid_vfcr0;
- uint vid_vfaa0;
- uint vid_vfba0;
- uint vid_vfcr1;
- uint vid_vfaa1;
- uint vid_vfba1;
- u_char res5[0x18];
-} vid823_t;
-
-/* LCD interface. 823 Only.
-*/
-typedef struct lcd {
- uint lcd_lccr;
- uint lcd_lchcr;
- uint lcd_lcvcr;
- char res1[4];
- uint lcd_lcfaa;
- uint lcd_lcfba;
- char lcd_lcsr;
- char res2[0x7];
-} lcd823_t;
-
-/* I2C
-*/
-typedef struct i2c {
- u_char i2c_i2mod;
- char res1[3];
- u_char i2c_i2add;
- char res2[3];
- u_char i2c_i2brg;
- char res3[3];
- u_char i2c_i2com;
- char res4[3];
- u_char i2c_i2cer;
- char res5[3];
- u_char i2c_i2cmr;
- char res6[0x8b];
-} i2c8xx_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- char res1[4];
- uint sdma_sdar;
- u_char sdma_sdsr;
- char res3[3];
- u_char sdma_sdmr;
- char res4[3];
- u_char sdma_idsr1;
- char res5[3];
- u_char sdma_idmr1;
- char res6[3];
- u_char sdma_idsr2;
- char res7[3];
- u_char sdma_idmr2;
- char res8[0x13];
-} sdma8xx_t;
-
-/* Communication Processor Module Interrupt Controller.
-*/
-typedef struct cpm_ic {
- ushort cpic_civr;
- char res[0xe];
- uint cpic_cicr;
- uint cpic_cipr;
- uint cpic_cimr;
- uint cpic_cisr;
-} cpic8xx_t;
-
-/* Input/Output Port control/status registers.
-*/
-typedef struct io_port {
- ushort iop_padir;
- ushort iop_papar;
- ushort iop_paodr;
- ushort iop_padat;
- char res1[8];
- ushort iop_pcdir;
- ushort iop_pcpar;
- ushort iop_pcso;
- ushort iop_pcdat;
- ushort iop_pcint;
- char res2[6];
- ushort iop_pddir;
- ushort iop_pdpar;
- char res3[2];
- ushort iop_pddat;
- uint utmode;
- char res4[4];
-} iop8xx_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- ushort cpmt_tgcr;
- char res1[0xe];
- ushort cpmt_tmr1;
- ushort cpmt_tmr2;
- ushort cpmt_trr1;
- ushort cpmt_trr2;
- ushort cpmt_tcr1;
- ushort cpmt_tcr2;
- ushort cpmt_tcn1;
- ushort cpmt_tcn2;
- ushort cpmt_tmr3;
- ushort cpmt_tmr4;
- ushort cpmt_trr3;
- ushort cpmt_trr4;
- ushort cpmt_tcr3;
- ushort cpmt_tcr4;
- ushort cpmt_tcn3;
- ushort cpmt_tcn4;
- ushort cpmt_ter1;
- ushort cpmt_ter2;
- ushort cpmt_ter3;
- ushort cpmt_ter4;
- char res2[8];
-} cpmtimer8xx_t;
-
-/* Finally, the Communication Processor stuff.....
-*/
-typedef struct scc { /* Serial communication channels */
- uint scc_gsmrl;
- uint scc_gsmrh;
- ushort scc_psmr;
- char res1[2];
- ushort scc_todr;
- ushort scc_dsr;
- ushort scc_scce;
- char res2[2];
- ushort scc_sccm;
- char res3;
- u_char scc_sccs;
- char res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- char res1[2];
- ushort smc_smcmr;
- char res2[2];
- u_char smc_smce;
- char res3[3];
- u_char smc_smcm;
- char res4[5];
-} smc_t;
-
-/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
- * it fits within the address space.
- */
-
-typedef struct fec {
- uint fec_addr_low; /* lower 32 bits of station address */
- ushort fec_addr_high; /* upper 16 bits of station address */
- ushort res1; /* reserved */
- uint fec_hash_table_high; /* upper 32-bits of hash table */
- uint fec_hash_table_low; /* lower 32-bits of hash table */
- uint fec_r_des_start; /* beginning of Rx descriptor ring */
- uint fec_x_des_start; /* beginning of Tx descriptor ring */
- uint fec_r_buff_size; /* Rx buffer size */
- uint res2[9]; /* reserved */
- uint fec_ecntrl; /* ethernet control register */
- uint fec_ievent; /* interrupt event register */
- uint fec_imask; /* interrupt mask register */
- uint fec_ivec; /* interrupt level and vector status */
- uint fec_r_des_active; /* Rx ring updated flag */
- uint fec_x_des_active; /* Tx ring updated flag */
- uint res3[10]; /* reserved */
- uint fec_mii_data; /* MII data register */
- uint fec_mii_speed; /* MII speed control register */
- uint res4[17]; /* reserved */
- uint fec_r_bound; /* end of RAM (read-only) */
- uint fec_r_fstart; /* Rx FIFO start address */
- uint res5[6]; /* reserved */
- uint fec_x_fstart; /* Tx FIFO start address */
- uint res6[17]; /* reserved */
- uint fec_fun_code; /* fec SDMA function code */
- uint res7[3]; /* reserved */
- uint fec_r_cntrl; /* Rx control register */
- uint fec_r_hash; /* Rx hash register */
- uint res8[14]; /* reserved */
- uint fec_x_cntrl; /* Tx control register */
- uint res9[0x1e]; /* reserved */
-} fec_t;
-
-/* The FEC and LCD color map share the same address space....
- * I guess we will never see an 823T :-).
- */
-union fec_lcd {
- fec_t fl_un_fec;
- u_char fl_un_cmap[0x200];
-};
-
-typedef struct comm_proc {
- /* General control and status registers.
- */
- ushort cp_cpcr;
- u_char res1[2];
- ushort cp_rccr;
- u_char res2;
- u_char cp_rmds;
- u_char res3[4];
- ushort cp_cpmcr1;
- ushort cp_cpmcr2;
- ushort cp_cpmcr3;
- ushort cp_cpmcr4;
- u_char res4[2];
- ushort cp_rter;
- u_char res5[2];
- ushort cp_rtmr;
- u_char res6[0x14];
-
- /* Baud rate generators.
- */
- uint cp_brgc1;
- uint cp_brgc2;
- uint cp_brgc3;
- uint cp_brgc4;
-
- /* Serial Communication Channels.
- */
- scc_t cp_scc[4];
-
- /* Serial Management Channels.
- */
- smc_t cp_smc[2];
-
- /* Serial Peripheral Interface.
- */
- ushort cp_spmode;
- u_char res7[4];
- u_char cp_spie;
- u_char res8[3];
- u_char cp_spim;
- u_char res9[2];
- u_char cp_spcom;
- u_char res10[2];
-
- /* Parallel Interface Port.
- */
- u_char res11[2];
- ushort cp_pipc;
- u_char res12[2];
- ushort cp_ptpr;
- uint cp_pbdir;
- uint cp_pbpar;
- u_char res13[2];
- ushort cp_pbodr;
- uint cp_pbdat;
-
- /* Port E - MPC87x/88x only.
- */
- uint cp_pedir;
- uint cp_pepar;
- uint cp_peso;
- uint cp_peodr;
- uint cp_pedat;
-
- /* Communications Processor Timing Register -
- Contains RMII Timing for the FECs on MPC87x/88x only.
- */
- uint cp_cptr;
-
- /* Serial Interface and Time Slot Assignment.
- */
- uint cp_simode;
- u_char cp_sigmr;
- u_char res15;
- u_char cp_sistr;
- u_char cp_sicmr;
- u_char res16[4];
- uint cp_sicr;
- uint cp_sirp;
- u_char res17[0xc];
-
- /* 256 bytes of MPC823 video controller RAM array.
- */
- u_char cp_vcram[0x100];
- u_char cp_siram[0x200];
-
- /* The fast ethernet controller is not really part of the CPM,
- * but it resides in the address space.
- * The LCD color map is also here.
- */
- union fec_lcd fl_un;
-#define cp_fec fl_un.fl_un_fec
-#define lcd_cmap fl_un.fl_un_cmap
- char res18[0xE00];
-
- /* The MPC885 family has a second FEC here */
- fec_t cp_fec2;
-#define cp_fec1 cp_fec /* consistency macro */
-
- /* Dual Ported RAM follows.
- * There are many different formats for this memory area
- * depending upon the devices used and options chosen.
- * Some processors don't have all of it populated.
- */
- u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
- u_char cp_dparam[0x400]; /* Parameter RAM */
-} cpm8xx_t;
-
-/* Internal memory map.
-*/
-typedef struct immap {
- sysconf8xx_t im_siu_conf; /* SIU Configuration */
- pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
- memctl8xx_t im_memctl; /* Memory Controller */
- sit8xx_t im_sit; /* System integration timers */
- car8xx_t im_clkrst; /* Clocks and reset */
- sitk8xx_t im_sitk; /* Sys int timer keys */
- cark8xx_t im_clkrstk; /* Clocks and reset keys */
- vid823_t im_vid; /* Video (823 only) */
- lcd823_t im_lcd; /* LCD (823 only) */
- i2c8xx_t im_i2c; /* I2C control/status */
- sdma8xx_t im_sdma; /* SDMA control/status */
- cpic8xx_t im_cpic; /* CPM Interrupt Controller */
- iop8xx_t im_ioport; /* IO Port control/status */
- cpmtimer8xx_t im_cpmtimer; /* CPM timers */
- cpm8xx_t im_cpm; /* Communication processor */
-} immap_t;
-
-#endif /* __IMMAP_8XX__ */
+++ /dev/null
-/*
- * PowerPC atomic operations
- */
-
-#ifndef _ASM_PPC_ATOMIC_H_
-#define _ASM_PPC_ATOMIC_H_
-
-#include <linux/config.h>
-
-#ifdef CONFIG_SMP
-typedef struct { volatile int counter; } atomic_t;
-#else
-typedef struct { int counter; } atomic_t;
-#endif
-
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-extern void atomic_clear_mask(unsigned long mask, unsigned long *addr);
-extern void atomic_set_mask(unsigned long mask, unsigned long *addr);
-
-extern __inline__ int atomic_add_return(int a, atomic_t *v)
-{
- int t;
-
- __asm__ __volatile__("\n\
-1: lwarx %0,0,%3\n\
- add %0,%2,%0\n\
- stwcx. %0,0,%3\n\
- bne- 1b"
- : "=&r" (t), "=m" (*v)
- : "r" (a), "r" (v), "m" (*v)
- : "cc");
-
- return t;
-}
-
-extern __inline__ int atomic_sub_return(int a, atomic_t *v)
-{
- int t;
-
- __asm__ __volatile__("\n\
-1: lwarx %0,0,%3\n\
- subf %0,%2,%0\n\
- stwcx. %0,0,%3\n\
- bne- 1b"
- : "=&r" (t), "=m" (*v)
- : "r" (a), "r" (v), "m" (*v)
- : "cc");
-
- return t;
-}
-
-extern __inline__ int atomic_inc_return(atomic_t *v)
-{
- int t;
-
- __asm__ __volatile__("\n\
-1: lwarx %0,0,%2\n\
- addic %0,%0,1\n\
- stwcx. %0,0,%2\n\
- bne- 1b"
- : "=&r" (t), "=m" (*v)
- : "r" (v), "m" (*v)
- : "cc");
-
- return t;
-}
-
-extern __inline__ int atomic_dec_return(atomic_t *v)
-{
- int t;
-
- __asm__ __volatile__("\n\
-1: lwarx %0,0,%2\n\
- addic %0,%0,-1\n\
- stwcx. %0,0,%2\n\
- bne 1b"
- : "=&r" (t), "=m" (*v)
- : "r" (v), "m" (*v)
- : "cc");
-
- return t;
-}
-
-#define atomic_add(a, v) ((void) atomic_add_return((a), (v)))
-#define atomic_sub(a, v) ((void) atomic_sub_return((a), (v)))
-#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0)
-#define atomic_inc(v) ((void) atomic_inc_return((v)))
-#define atomic_dec(v) ((void) atomic_dec_return((v)))
-#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0)
-
-#endif /* _ASM_PPC_ATOMIC_H_ */
+++ /dev/null
-/*
- * bitops.h: Bit string operations on the ppc
- */
-
-#ifndef _PPC_BITOPS_H
-#define _PPC_BITOPS_H
-
-#include <linux/config.h>
-#include <asm/byteorder.h>
-
-extern void set_bit(int nr, volatile void *addr);
-extern void clear_bit(int nr, volatile void *addr);
-extern void change_bit(int nr, volatile void *addr);
-extern int test_and_set_bit(int nr, volatile void *addr);
-extern int test_and_clear_bit(int nr, volatile void *addr);
-extern int test_and_change_bit(int nr, volatile void *addr);
-
-/*
- * Arguably these bit operations don't imply any memory barrier or
- * SMP ordering, but in fact a lot of drivers expect them to imply
- * both, since they do on x86 cpus.
- */
-#ifdef CONFIG_SMP
-#define SMP_WMB "eieio\n"
-#define SMP_MB "\nsync"
-#else
-#define SMP_WMB
-#define SMP_MB
-#endif /* CONFIG_SMP */
-
-#define __INLINE_BITOPS 1
-
-#if __INLINE_BITOPS
-/*
- * These used to be if'd out here because using : "cc" as a constraint
- * resulted in errors from egcs. Things may be OK with gcc-2.95.
- */
-extern __inline__ void set_bit(int nr, volatile void * addr)
-{
- unsigned long old;
- unsigned long mask = 1 << (nr & 0x1f);
- unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%3\n\
- or %0,%0,%2\n\
- stwcx. %0,0,%3\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc" );
-}
-
-extern __inline__ void clear_bit(int nr, volatile void *addr)
-{
- unsigned long old;
- unsigned long mask = 1 << (nr & 0x1f);
- unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%3\n\
- andc %0,%0,%2\n\
- stwcx. %0,0,%3\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc");
-}
-
-extern __inline__ void change_bit(int nr, volatile void *addr)
-{
- unsigned long old;
- unsigned long mask = 1 << (nr & 0x1f);
- unsigned long *p = ((unsigned long *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%3\n\
- xor %0,%0,%2\n\
- stwcx. %0,0,%3\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc");
-}
-
-extern __inline__ int test_and_set_bit(int nr, volatile void *addr)
-{
- unsigned int old, t;
- unsigned int mask = 1 << (nr & 0x1f);
- volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%4\n\
- or %1,%0,%3\n\
- stwcx. %1,0,%4\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=&r" (t), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc");
-
- return (old & mask) != 0;
-}
-
-extern __inline__ int test_and_clear_bit(int nr, volatile void *addr)
-{
- unsigned int old, t;
- unsigned int mask = 1 << (nr & 0x1f);
- volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%4\n\
- andc %1,%0,%3\n\
- stwcx. %1,0,%4\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=&r" (t), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc");
-
- return (old & mask) != 0;
-}
-
-extern __inline__ int test_and_change_bit(int nr, volatile void *addr)
-{
- unsigned int old, t;
- unsigned int mask = 1 << (nr & 0x1f);
- volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5);
-
- __asm__ __volatile__(SMP_WMB "\
-1: lwarx %0,0,%4\n\
- xor %1,%0,%3\n\
- stwcx. %1,0,%4\n\
- bne 1b"
- SMP_MB
- : "=&r" (old), "=&r" (t), "=m" (*p)
- : "r" (mask), "r" (p), "m" (*p)
- : "cc");
-
- return (old & mask) != 0;
-}
-#endif /* __INLINE_BITOPS */
-
-extern __inline__ int test_bit(int nr, __const__ volatile void *addr)
-{
- __const__ unsigned int *p = (__const__ unsigned int *) addr;
-
- return ((p[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
-}
-
-/* Return the bit position of the most significant 1 bit in a word */
-/* - the result is undefined when x == 0 */
-extern __inline__ int __ilog2(unsigned int x)
-{
- int lz;
-
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
- return 31 - lz;
-}
-
-extern __inline__ int ffz(unsigned int x)
-{
- if ((x = ~x) == 0)
- return 32;
- return __ilog2(x & -x);
-}
-
-/*
- * fls: find last (most-significant) bit set.
- * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
- *
- * On powerpc, __ilog2(0) returns -1, but this is not safe in general
- */
-static __inline__ int fls(unsigned int x)
-{
- return __ilog2(x) + 1;
-}
-#define PLATFORM_FLS
-
-/**
- * fls64 - find last set bit in a 64-bit word
- * @x: the word to search
- *
- * This is defined in a similar way as the libc and compiler builtin
- * ffsll, but returns the position of the most significant set bit.
- *
- * fls64(value) returns 0 if value is 0 or the position of the last
- * set bit if value is nonzero. The last (most significant) bit is
- * at position 64.
- */
-#if BITS_PER_LONG == 32
-static inline int fls64(__u64 x)
-{
- __u32 h = x >> 32;
- if (h)
- return fls(h) + 32;
- return fls(x);
-}
-#elif BITS_PER_LONG == 64
-static inline int fls64(__u64 x)
-{
- if (x == 0)
- return 0;
- return __ilog2(x) + 1;
-}
-#else
-#error BITS_PER_LONG not 32 or 64
-#endif
-
-static inline int __ilog2_u64(u64 n)
-{
- return fls64(n) - 1;
-}
-
-static inline int ffs64(u64 x)
-{
- return __ilog2_u64(x & -x) + 1ull;
-}
-
-#ifdef __KERNEL__
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-extern __inline__ int ffs(int x)
-{
- return __ilog2(x & -x) + 1;
-}
-#define PLATFORM_FFS
-
-/*
- * hweightN: returns the hamming weight (i.e. the number
- * of bits set) of a N-bit word
- */
-
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
-
-#endif /* __KERNEL__ */
-
-/*
- * This implementation of find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h.
- */
-#define find_first_zero_bit(addr, size) \
- find_next_zero_bit((addr), (size), 0)
-
-extern __inline__ unsigned long find_next_zero_bit(void * addr,
- unsigned long size, unsigned long offset)
-{
- unsigned int * p = ((unsigned int *) addr) + (offset >> 5);
- unsigned int result = offset & ~31UL;
- unsigned int tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if (offset) {
- tmp = *p++;
- tmp |= ~0UL >> (32-offset);
- if (size < 32)
- goto found_first;
- if (tmp != ~0U)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while (size >= 32) {
- if ((tmp = *p++) != ~0U)
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if (!size)
- return result;
- tmp = *p;
-found_first:
- tmp |= ~0UL << size;
-found_middle:
- return result + ffz(tmp);
-}
-
-
-#define _EXT2_HAVE_ASM_BITOPS_
-
-#ifdef __KERNEL__
-/*
- * test_and_{set,clear}_bit guarantee atomicity without
- * disabling interrupts.
- */
-#define ext2_set_bit(nr, addr) test_and_set_bit((nr) ^ 0x18, addr)
-#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr) ^ 0x18, addr)
-
-#else
-extern __inline__ int ext2_set_bit(int nr, void * addr)
-{
- int mask;
- unsigned char *ADDR = (unsigned char *) addr;
- int oldbit;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
- oldbit = (*ADDR & mask) ? 1 : 0;
- *ADDR |= mask;
- return oldbit;
-}
-
-extern __inline__ int ext2_clear_bit(int nr, void * addr)
-{
- int mask;
- unsigned char *ADDR = (unsigned char *) addr;
- int oldbit;
-
- ADDR += nr >> 3;
- mask = 1 << (nr & 0x07);
- oldbit = (*ADDR & mask) ? 1 : 0;
- *ADDR = *ADDR & ~mask;
- return oldbit;
-}
-#endif /* __KERNEL__ */
-
-extern __inline__ int ext2_test_bit(int nr, __const__ void * addr)
-{
- __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
-
- return (ADDR[nr >> 3] >> (nr & 7)) & 1;
-}
-
-/*
- * This implementation of ext2_find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
- */
-
-#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
-
-static __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
- unsigned long size, unsigned long offset)
-{
- unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
- unsigned int result = offset & ~31UL;
- unsigned int tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 31UL;
- if (offset) {
- tmp = cpu_to_le32p(p++);
- tmp |= ~0UL >> (32-offset);
- if (size < 32)
- goto found_first;
- if (tmp != ~0U)
- goto found_middle;
- size -= 32;
- result += 32;
- }
- while (size >= 32) {
- if ((tmp = cpu_to_le32p(p++)) != ~0U)
- goto found_middle;
- result += 32;
- size -= 32;
- }
- if (!size)
- return result;
- tmp = cpu_to_le32p(p);
-found_first:
- tmp |= ~0U << size;
-found_middle:
- return result + ffz(tmp);
-}
-
-/* Bitmap functions for the minix filesystem. */
-#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
-#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
-#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size)
-
-#endif /* _PPC_BITOPS_H */
+++ /dev/null
-#ifndef _PPC_BYTEORDER_H
-#define _PPC_BYTEORDER_H
-
-#include <asm/types.h>
-
-#ifdef __GNUC__
-
-extern __inline__ unsigned ld_le16(const volatile unsigned short *addr)
-{
- unsigned val;
-
- __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
- return val;
-}
-
-extern __inline__ void st_le16(volatile unsigned short *addr, const unsigned val)
-{
- __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-extern __inline__ unsigned ld_le32(const volatile unsigned *addr)
-{
- unsigned val;
-
- __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
- return val;
-}
-
-extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val)
-{
- __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-/* alas, egcs sounds like it has a bug in this code that doesn't use the
- inline asm correctly, and can cause file corruption. Until I hear that
- it's fixed, I can live without the extra speed. I hope. */
-#if !(__GNUC__ >= 2 && __GNUC_MINOR__ >= 90)
-#if 0
-# define __arch_swab16(x) ld_le16(&x)
-# define __arch_swab32(x) ld_le32(&x)
-#else
-static __inline__ __attribute__((const)) __u16 ___arch__swab16(__u16 value)
-{
- __u16 result;
-
- __asm__("rlwimi %0,%1,8,16,23"
- : "=r" (result)
- : "r" (value), "0" (value >> 8));
- return result;
-}
-
-static __inline__ __attribute__((const)) __u32 ___arch__swab32(__u32 value)
-{
- __u32 result;
-
- __asm__("rlwimi %0,%1,24,16,23\n\t"
- "rlwimi %0,%1,8,8,15\n\t"
- "rlwimi %0,%1,24,0,7"
- : "=r" (result)
- : "r" (value), "0" (value >> 24));
- return result;
-}
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#endif /* 0 */
-
-#endif
-
-/* The same, but returns converted value from the location pointer by addr. */
-#define __arch__swab16p(addr) ld_le16(addr)
-#define __arch__swab32p(addr) ld_le32(addr)
-
-/* The same, but do the conversion in situ, ie. put the value back to addr. */
-#define __arch__swab16s(addr) st_le16(addr,*addr)
-#define __arch__swab32s(addr) st_le32(addr,*addr)
-
-#endif /* __GNUC__ */
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-#define __BYTEORDER_HAS_U64__
-#endif
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _PPC_BYTEORDER_H */
+++ /dev/null
-/*
- * include/asm-ppc/cache.h
- */
-#ifndef __ARCH_PPC_CACHE_H
-#define __ARCH_PPC_CACHE_H
-
-#include <linux/config.h>
-#include <asm/processor.h>
-
-/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
-#define L1_CACHE_SHIFT 4
-#elif defined(CONFIG_PPC64BRIDGE)
-#define L1_CACHE_SHIFT 7
-#elif defined(CONFIG_E500MC)
-#define L1_CACHE_SHIFT 6
-#else
-#define L1_CACHE_SHIFT 5
-#endif
-
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-/*
- * For compatibility reasons support the CONFIG_SYS_CACHELINE_SIZE too
- */
-#ifndef CONFIG_SYS_CACHELINE_SIZE
-#define CONFIG_SYS_CACHELINE_SIZE L1_CACHE_BYTES
-#endif
-
-#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
-#define L1_CACHE_PAGES 8
-
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-
-#ifdef MODULE
-#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
-#else
-#define __cacheline_aligned \
- __attribute__((__aligned__(L1_CACHE_BYTES), \
- __section__(".data.cacheline_aligned")))
-#endif
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache(void);
-extern void invalidate_dcache(void);
-extern void invalidate_icache(void);
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-extern void unlock_ram_in_cache(void);
-#endif /* CONFIG_SYS_INIT_RAM_LOCK */
-#endif /* __ASSEMBLY__ */
-
-/* prep registers for L2 */
-#define CACHECRBA 0x80000823 /* Cache configuration register address */
-#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
-#define L2CACHE_512KB 0x00 /* 512KB */
-#define L2CACHE_256KB 0x01 /* 256KB */
-#define L2CACHE_1MB 0x02 /* 1MB */
-#define L2CACHE_NONE 0x03 /* NONE */
-#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
-
-#ifdef CONFIG_8xx
-/* Cache control on the MPC8xx is provided through some additional
- * special purpose registers.
- */
-#define IC_CST 560 /* Instruction cache control/status */
-#define IC_ADR 561 /* Address needed for some commands */
-#define IC_DAT 562 /* Read-only data register */
-#define DC_CST 568 /* Data cache control/status */
-#define DC_ADR 569 /* Address needed for some commands */
-#define DC_DAT 570 /* Read-only data register */
-
-/* Commands. Only the first few are available to the instruction cache.
-*/
-#define IDC_ENABLE 0x02000000 /* Cache enable */
-#define IDC_DISABLE 0x04000000 /* Cache disable */
-#define IDC_LDLCK 0x06000000 /* Load and lock */
-#define IDC_UNLINE 0x08000000 /* Unlock line */
-#define IDC_UNALL 0x0a000000 /* Unlock all */
-#define IDC_INVALL 0x0c000000 /* Invalidate all */
-
-#define DC_FLINE 0x0e000000 /* Flush data cache line */
-#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
-#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
-#define DC_SLES 0x05000000 /* Set little endian swap mode */
-#define DC_CLES 0x07000000 /* Clear little endian swap mode */
-
-/* Status.
-*/
-#define IDC_ENABLED 0x80000000 /* Cache is enabled */
-#define IDC_CERR1 0x00200000 /* Cache error 1 */
-#define IDC_CERR2 0x00100000 /* Cache error 2 */
-#define IDC_CERR3 0x00080000 /* Cache error 3 */
-
-#define DC_DFWT 0x40000000 /* Data cache is forced write through */
-#define DC_LES 0x20000000 /* Caches are little endian mode */
-#endif /* CONFIG_8xx */
-
-#endif
+++ /dev/null
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-#define CONFIG_LMB
-
-#ifndef CONFIG_MAX_MEM_MAPPED
-#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
-#else
-#define CONFIG_MAX_MEM_MAPPED (256 << 20)
-#endif
-#endif
-
-/* Check if boards need to enable FSL DMA engine for SDRAM init */
-#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
-#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
- ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
- !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
-#define CONFIG_FSL_DMA
-#endif
-#endif
-
-#if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \
- defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
- defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
-#define CONFIG_MAX_CPUS 2
-#elif defined(CONFIG_PPC_P4080)
-#define CONFIG_MAX_CPUS 8
-#else
-#define CONFIG_MAX_CPUS 1
-#endif
-
-/*
- * Provide a default boot page translation virtual address that lines up with
- * Freescale's default e500 reset page.
- */
-#if (defined(CONFIG_E500) && defined(CONFIG_MP))
-#ifndef CONFIG_BPTR_VIRT_ADDR
-#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
-#endif
-#endif
-
-/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
-#if defined(CONFIG_TSEC_ENET) && \
- (defined(CONFIG_P1020) || defined(CONFIG_P1011))
-#define CONFIG_TSECV2
-#endif
-
-/* Number of TLB CAM entries we have on FSL Book-E chips */
-#if defined(CONFIG_E500MC)
-#define CONFIG_SYS_NUM_TLBCAMS 64
-#elif defined(CONFIG_E500)
-#define CONFIG_SYS_NUM_TLBCAMS 16
-#endif
-
-/* Relocation to SDRAM works on all PPC boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
-#endif /* _ASM_CONFIG_H_ */
+++ /dev/null
-
-/*
- * MPC8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the MPC8260 internal
- * memory map. See immap.h for details.
- */
-#ifndef __CPM_82XX__
-#define __CPM_82XX__
-
-#include <asm/immap_8260.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((uint)0x80000000)
-#define CPM_CR_PAGE ((uint)0x7c000000)
-#define CPM_CR_SBLOCK ((uint)0x03e00000)
-#define CPM_CR_FLG ((uint)0x00010000)
-#define CPM_CR_MCN ((uint)0x00003fc0)
-#define CPM_CR_OPCODE ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK (0x04)
-#define CPM_CR_SCC2_SBLOCK (0x05)
-#define CPM_CR_SCC3_SBLOCK (0x06)
-#define CPM_CR_SCC4_SBLOCK (0x07)
-#define CPM_CR_SMC1_SBLOCK (0x08)
-#define CPM_CR_SMC2_SBLOCK (0x09)
-#define CPM_CR_SPI_SBLOCK (0x0a)
-#define CPM_CR_I2C_SBLOCK (0x0b)
-#define CPM_CR_TIMER_SBLOCK (0x0f)
-#define CPM_CR_RAND_SBLOCK (0x0e)
-#define CPM_CR_FCC1_SBLOCK (0x10)
-#define CPM_CR_FCC2_SBLOCK (0x11)
-#define CPM_CR_FCC3_SBLOCK (0x12)
-#define CPM_CR_IDMA1_SBLOCK (0x14)
-#define CPM_CR_IDMA2_SBLOCK (0x15)
-#define CPM_CR_IDMA3_SBLOCK (0x16)
-#define CPM_CR_IDMA4_SBLOCK (0x17)
-#define CPM_CR_MCC1_SBLOCK (0x1c)
-
-#define CPM_CR_SCC1_PAGE (0x00)
-#define CPM_CR_SCC2_PAGE (0x01)
-#define CPM_CR_SCC3_PAGE (0x02)
-#define CPM_CR_SCC4_PAGE (0x03)
-#define CPM_CR_SMC1_PAGE (0x07)
-#define CPM_CR_SMC2_PAGE (0x08)
-#define CPM_CR_SPI_PAGE (0x09)
-#define CPM_CR_I2C_PAGE (0x0a)
-#define CPM_CR_TIMER_PAGE (0x0a)
-#define CPM_CR_RAND_PAGE (0x0a)
-#define CPM_CR_FCC1_PAGE (0x04)
-#define CPM_CR_FCC2_PAGE (0x05)
-#define CPM_CR_FCC3_PAGE (0x06)
-#define CPM_CR_IDMA1_PAGE (0x07)
-#define CPM_CR_IDMA2_PAGE (0x08)
-#define CPM_CR_IDMA3_PAGE (0x09)
-#define CPM_CR_IDMA4_PAGE (0x0a)
-#define CPM_CR_MCC1_PAGE (0x07)
-#define CPM_CR_MCC2_PAGE (0x08)
-
-/* Some opcodes (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
- ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-#ifndef CONFIG_MPC8272_FAMILY
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
-#else /* 8247/48/71/72 */
-#define CPM_DATAONLY_SIZE ((uint)(4 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
-#endif /* !CONFIG_MPC8272_FAMILY */
-
-/* The number of pages of host memory we allocate for CPM. This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES 2
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8260_t *cpmp; /* Pointer to comm processor */
-uint m8260_cpm_dpalloc(uint size, uint align);
-uint m8260_cpm_hostalloc(uint size, uint align);
-void m8260_cpm_setbrg(uint brg, uint rate);
-void m8260_cpm_fastbrg(uint brg, uint rate, int div16);
-void m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
-#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
-#else
-#define CPM_POST_WORD_ADDR CONFIG_SYS_CPM_POST_WORD_ADDR
-#endif
-
-#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
-#define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
-#else
-#define CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_BOOTCOUNT_ADDR
-#endif
-
-#define PROFF_SCC1 ((uint)0x8000)
-#define PROFF_SCC2 ((uint)0x8100)
-#define PROFF_SCC3 ((uint)0x8200)
-#define PROFF_SCC4 ((uint)0x8300)
-#define PROFF_FCC1 ((uint)0x8400)
-#define PROFF_FCC2 ((uint)0x8500)
-#define PROFF_FCC3 ((uint)0x8600)
-#define PROFF_MCC1 ((uint)0x8700)
-#define PROFF_SMC1_BASE ((uint)0x87fc)
-#define PROFF_IDMA1_BASE ((uint)0x87fe)
-#define PROFF_MCC2 ((uint)0x8800)
-#define PROFF_SMC2_BASE ((uint)0x88fc)
-#define PROFF_IDMA2_BASE ((uint)0x88fe)
-#define PROFF_SPI_BASE ((uint)0x89fc)
-#define PROFF_IDMA3_BASE ((uint)0x89fe)
-#define PROFF_TIMERS ((uint)0x8ae0)
-#define PROFF_REVNUM ((uint)0x8af0)
-#define PROFF_RAND ((uint)0x8af8)
-#define PROFF_I2C_BASE ((uint)0x8afc)
-#define PROFF_IDMA4_BASE ((uint)0x8afe)
-
-/* The SMCs are relocated to any of the first eight DPRAM pages.
- * We will fix these at the first locations of DPRAM, until we
- * get some microcode patches :-).
- * The parameter ram space for the SMCs is fifty-some bytes, and
- * they are required to start on a 64 byte boundary.
- */
-#define PROFF_SMC1 (0)
-#define PROFF_SMC2 (64)
-#define PROFF_SPI ((16*1024) - 128)
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- uint smc_stmp; /* SDMA Temp */
-} smc_uart_t;
-
-/* SMC uart mode register (Internal memory map).
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_TXE ((unsigned char)0x10)
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* SCC as HDLC controller - taken from commproc.h
- */
-typedef struct scc_hdlc {
- sccp_t sh_genscc;
- /*
- * HDLC specific parameter RAM
- */
- uchar res[4]; /* reserved */
- ulong sh_cmask; /* CRC constant */
- ulong sh_cpres; /* CRC preset */
- ushort sh_disfc; /* discarded frame counter */
- ushort sh_crcec; /* CRC error counter */
- ushort sh_abtsc; /* abort sequence counter */
- ushort sh_nmarc; /* nonmatching address rx cnt */
- ushort sh_retrc; /* frame retransmission cnt */
- ushort sh_mflr; /* maximum frame length reg */
- ushort sh_maxcnt; /* maximum length counter */
- ushort sh_rfthr; /* received frames threshold */
- ushort sh_rfcnt; /* received frames count */
- ushort sh_hmask; /* user defined frm addr mask */
- ushort sh_haddr1; /* user defined frm address 1 */
- ushort sh_haddr2; /* user defined frm address 2 */
- ushort sh_haddr3; /* user defined frm address 3 */
- ushort sh_haddr4; /* user defined frm address 4 */
- ushort tmp; /* temp */
- ushort tmp_mb; /* temp */
-} scc_hdlc_t;
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
-#define FCC_GFMR_TCI ((uint)0x20000000)
-#define FCC_GFMR_TRX ((uint)0x10000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_CDP ((uint)0x04000000)
-#define FCC_GFMR_CTSP ((uint)0x02000000)
-#define FCC_GFMR_CDS ((uint)0x01000000)
-#define FCC_GFMR_CTSS ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
-#define FCC_GFMR_RTSM ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
-#define FCC_GFMR_REVD ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
-#define FCC_GFMR_ENR ((uint)0x00000020)
-#define FCC_GFMR_ENT ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
- ushort fcc_riptr; /* Rx Internal temp pointer */
- ushort fcc_tiptr; /* Tx Internal temp pointer */
- ushort fcc_res1;
- ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
- uint fcc_rstate; /* Upper byte is Func code, must be set */
- uint fcc_rbase; /* Receive BD base */
- ushort fcc_rbdstat; /* RxBD status */
- ushort fcc_rbdlen; /* RxBD down counter */
- uint fcc_rdptr; /* RxBD internal data pointer */
- uint fcc_tstate; /* Upper byte is Func code, must be set */
- uint fcc_tbase; /* Transmit BD base */
- ushort fcc_tbdstat; /* TxBD status */
- ushort fcc_tbdlen; /* TxBD down counter */
- uint fcc_tdptr; /* TxBD internal data pointer */
- uint fcc_rbptr; /* Rx BD Internal buf pointer */
- uint fcc_tbptr; /* Tx BD Internal buf pointer */
- uint fcc_rcrc; /* Rx temp CRC */
- uint fcc_res2;
- uint fcc_tcrc; /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
- fccp_t fen_genfcc;
- uint fen_statbuf; /* Internal status buffer */
- uint fen_camptr; /* CAM address */
- uint fen_cmask; /* Constant mask for CRC */
- uint fen_cpres; /* Preset CRC */
- uint fen_crcec; /* CRC Error counter */
- uint fen_alec; /* alignment error counter */
- uint fen_disfc; /* discard frame counter */
- ushort fen_retlim; /* Retry limit */
- ushort fen_retcnt; /* Retry counter */
- ushort fen_pper; /* Persistence */
- ushort fen_boffcnt; /* backoff counter */
- uint fen_gaddrh; /* Group address filter, high 32-bits */
- uint fen_gaddrl; /* Group address filter, low 32-bits */
- ushort fen_tfcstat; /* out of sequence TxBD */
- ushort fen_tfclen;
- uint fen_tfcptr;
- ushort fen_mflr; /* Maximum frame length (1518) */
- ushort fen_paddrh; /* MAC address */
- ushort fen_paddrm;
- ushort fen_paddrl;
- ushort fen_ibdcount; /* Internal BD counter */
- ushort fen_idbstart; /* Internal BD start pointer */
- ushort fen_ibdend; /* Internal BD end pointer */
- ushort fen_txlen; /* Internal Tx frame length counter */
- uint fen_ibdbase[8]; /* Internal use */
- uint fen_iaddrh; /* Individual address filter */
- uint fen_iaddrl;
- ushort fen_minflr; /* Minimum frame length (64) */
- ushort fen_taddrh; /* Filter transfer MAC address */
- ushort fen_taddrm;
- ushort fen_taddrl;
- ushort fen_padptr; /* Pointer to pad byte buffer */
- ushort fen_cftype; /* control frame type */
- ushort fen_cfrange; /* control frame range */
- ushort fen_maxb; /* maximum BD count */
- ushort fen_maxd1; /* Max DMA1 length (1520) */
- ushort fen_maxd2; /* Max DMA2 length (1520) */
- ushort fen_maxd; /* internal max DMA count */
- ushort fen_dmacnt; /* internal DMA counter */
- uint fen_octc; /* Total octect counter */
- uint fen_colc; /* Total collision counter */
- uint fen_broc; /* Total broadcast packet counter */
- uint fen_mulc; /* Total multicast packet count */
- uint fen_uspc; /* Total packets < 64 bytes */
- uint fen_frgc; /* Total packets < 64 bytes with errors */
- uint fen_ospc; /* Total packets > 1518 */
- uint fen_jbrc; /* Total packets > 1518 with errors */
- uint fen_p64c; /* Total packets == 64 bytes */
- uint fen_p65c; /* Total packets 64 < bytes <= 127 */
- uint fen_p128c; /* Total packets 127 < bytes <= 255 */
- uint fen_p256c; /* Total packets 256 < bytes <= 511 */
- uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
- uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
- uint fen_cambuf; /* Internal CAM buffer poiner */
- ushort fen_rfthr; /* Received frames threshold */
- ushort fen_rfcnt; /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
-#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
-#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
-#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
-#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
-#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
-#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
-#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
-#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
-#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
-#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
-#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
-#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
-#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
-#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-/* SPI Event/Mask register.
-*/
-#define SPI_EMASK 0x37 /* Event Mask */
-#define SPI_MME 0x20 /* Multi-Master Error */
-#define SPI_TXE 0x10 /* Transmit Error */
-#define SPI_BSY 0x04 /* Busy */
-#define SPI_TXB 0x02 /* Tx Buffer Empty */
-#define SPI_RXB 0x01 /* RX Buffer full/closed */
-
-#define SPI_STR 0x80 /* SPCOM: Start transmit */
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
-#define BD_IIC_START ((ushort)0x0400)
-
-#endif /* __CPM_82XX__ */
+++ /dev/null
-
-/*
- * MPC85xx Communication Processor Module
- * Copyright (c) 2003,Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * MPC8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the MPC8260 internal
- * memory map. See immap.h for details.
- */
-#ifndef __CPM_85XX__
-#define __CPM_85XX__
-
-#include <asm/immap_85xx.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((uint)0x80000000)
-#define CPM_CR_PAGE ((uint)0x7c000000)
-#define CPM_CR_SBLOCK ((uint)0x03e00000)
-#define CPM_CR_FLG ((uint)0x00010000)
-#define CPM_CR_MCN ((uint)0x00003fc0)
-#define CPM_CR_OPCODE ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK (0x04)
-#define CPM_CR_SCC2_SBLOCK (0x05)
-#define CPM_CR_SCC3_SBLOCK (0x06)
-#define CPM_CR_SCC4_SBLOCK (0x07)
-#define CPM_CR_SMC1_SBLOCK (0x08)
-#define CPM_CR_SMC2_SBLOCK (0x09)
-#define CPM_CR_SPI_SBLOCK (0x0a)
-#define CPM_CR_I2C_SBLOCK (0x0b)
-#define CPM_CR_TIMER_SBLOCK (0x0f)
-#define CPM_CR_RAND_SBLOCK (0x0e)
-#define CPM_CR_FCC1_SBLOCK (0x10)
-#define CPM_CR_FCC2_SBLOCK (0x11)
-#define CPM_CR_FCC3_SBLOCK (0x12)
-#define CPM_CR_MCC1_SBLOCK (0x1c)
-
-#define CPM_CR_SCC1_PAGE (0x00)
-#define CPM_CR_SCC2_PAGE (0x01)
-#define CPM_CR_SCC3_PAGE (0x02)
-#define CPM_CR_SCC4_PAGE (0x03)
-#define CPM_CR_SPI_PAGE (0x09)
-#define CPM_CR_I2C_PAGE (0x0a)
-#define CPM_CR_TIMER_PAGE (0x0a)
-#define CPM_CR_RAND_PAGE (0x0a)
-#define CPM_CR_FCC1_PAGE (0x04)
-#define CPM_CR_FCC2_PAGE (0x05)
-#define CPM_CR_FCC3_PAGE (0x06)
-#define CPM_CR_MCC1_PAGE (0x07)
-#define CPM_CR_MCC2_PAGE (0x08)
-
-/* Some opcodes (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
- ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7FFFFFFF)
-#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#else /* MPC8540, MPC8560 */
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000B000)
-#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-#endif
-
-/* The number of pages of host memory we allocate for CPM. This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES 2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-/*extern cpm8560_t *cpmp; Pointer to comm processor */
-uint m8560_cpm_dpalloc(uint size, uint align);
-uint m8560_cpm_hostalloc(uint size, uint align);
-void m8560_cpm_setbrg(uint brg, uint rate);
-void m8560_cpm_fastbrg(uint brg, uint rate, int div16);
-void m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
-#define PROFF_SCC1 ((uint)0x8000)
-#define PROFF_SCC2 ((uint)0x8100)
-#define PROFF_SCC3 ((uint)0x8200)
-#define PROFF_SCC4 ((uint)0x8300)
-#define PROFF_FCC1 ((uint)0x8400)
-#define PROFF_FCC2 ((uint)0x8500)
-#define PROFF_FCC3 ((uint)0x8600)
-#define PROFF_MCC1 ((uint)0x8700)
-#define PROFF_MCC2 ((uint)0x8800)
-#define PROFF_SPI_BASE ((uint)0x89fc)
-#define PROFF_TIMERS ((uint)0x8ae0)
-#define PROFF_REVNUM ((uint)0x8af0)
-#define PROFF_RAND ((uint)0x8af8)
-#define PROFF_I2C_BASE ((uint)0x8afc)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
-#define FCC_GFMR_TCI ((uint)0x20000000)
-#define FCC_GFMR_TRX ((uint)0x10000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_CDP ((uint)0x04000000)
-#define FCC_GFMR_CTSP ((uint)0x02000000)
-#define FCC_GFMR_CDS ((uint)0x01000000)
-#define FCC_GFMR_CTSS ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
-#define FCC_GFMR_RTSM ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
-#define FCC_GFMR_REVD ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
-#define FCC_GFMR_ENR ((uint)0x00000020)
-#define FCC_GFMR_ENT ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
- ushort fcc_riptr; /* Rx Internal temp pointer */
- ushort fcc_tiptr; /* Tx Internal temp pointer */
- ushort fcc_res1;
- ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
- uint fcc_rstate; /* Upper byte is Func code, must be set */
- uint fcc_rbase; /* Receive BD base */
- ushort fcc_rbdstat; /* RxBD status */
- ushort fcc_rbdlen; /* RxBD down counter */
- uint fcc_rdptr; /* RxBD internal data pointer */
- uint fcc_tstate; /* Upper byte is Func code, must be set */
- uint fcc_tbase; /* Transmit BD base */
- ushort fcc_tbdstat; /* TxBD status */
- ushort fcc_tbdlen; /* TxBD down counter */
- uint fcc_tdptr; /* TxBD internal data pointer */
- uint fcc_rbptr; /* Rx BD Internal buf pointer */
- uint fcc_tbptr; /* Tx BD Internal buf pointer */
- uint fcc_rcrc; /* Rx temp CRC */
- uint fcc_res2;
- uint fcc_tcrc; /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
- fccp_t fen_genfcc;
- uint fen_statbuf; /* Internal status buffer */
- uint fen_camptr; /* CAM address */
- uint fen_cmask; /* Constant mask for CRC */
- uint fen_cpres; /* Preset CRC */
- uint fen_crcec; /* CRC Error counter */
- uint fen_alec; /* alignment error counter */
- uint fen_disfc; /* discard frame counter */
- ushort fen_retlim; /* Retry limit */
- ushort fen_retcnt; /* Retry counter */
- ushort fen_pper; /* Persistence */
- ushort fen_boffcnt; /* backoff counter */
- uint fen_gaddrh; /* Group address filter, high 32-bits */
- uint fen_gaddrl; /* Group address filter, low 32-bits */
- ushort fen_tfcstat; /* out of sequence TxBD */
- ushort fen_tfclen;
- uint fen_tfcptr;
- ushort fen_mflr; /* Maximum frame length (1518) */
- ushort fen_paddrh; /* MAC address */
- ushort fen_paddrm;
- ushort fen_paddrl;
- ushort fen_ibdcount; /* Internal BD counter */
- ushort fen_ibdstart; /* Internal BD start pointer */
- ushort fen_ibdend; /* Internal BD end pointer */
- ushort fen_txlen; /* Internal Tx frame length counter */
- uint fen_ibdbase[8]; /* Internal use */
- uint fen_iaddrh; /* Individual address filter */
- uint fen_iaddrl;
- ushort fen_minflr; /* Minimum frame length (64) */
- ushort fen_taddrh; /* Filter transfer MAC address */
- ushort fen_taddrm;
- ushort fen_taddrl;
- ushort fen_padptr; /* Pointer to pad byte buffer */
- ushort fen_cftype; /* control frame type */
- ushort fen_cfrange; /* control frame range */
- ushort fen_maxb; /* maximum BD count */
- ushort fen_maxd1; /* Max DMA1 length (1520) */
- ushort fen_maxd2; /* Max DMA2 length (1520) */
- ushort fen_maxd; /* internal max DMA count */
- ushort fen_dmacnt; /* internal DMA counter */
- uint fen_octc; /* Total octect counter */
- uint fen_colc; /* Total collision counter */
- uint fen_broc; /* Total broadcast packet counter */
- uint fen_mulc; /* Total multicast packet count */
- uint fen_uspc; /* Total packets < 64 bytes */
- uint fen_frgc; /* Total packets < 64 bytes with errors */
- uint fen_ospc; /* Total packets > 1518 */
- uint fen_jbrc; /* Total packets > 1518 with errors */
- uint fen_p64c; /* Total packets == 64 bytes */
- uint fen_p65c; /* Total packets 64 < bytes <= 127 */
- uint fen_p128c; /* Total packets 127 < bytes <= 255 */
- uint fen_p256c; /* Total packets 256 < bytes <= 511 */
- uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
- uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
- uint fen_cambuf; /* Internal CAM buffer poiner */
- ushort fen_rfthr; /* Received frames threshold */
- ushort fen_rfcnt; /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
-#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
-#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
-#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
-#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
-#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
-#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
-#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
-#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
-#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
-#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
-#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
-#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
-#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register 15-12
- */
-#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
-#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
-#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
-#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register 15-14
- */
-#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
-#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
-#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
-#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
-#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
-#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
-#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
-#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
-#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
-
-#endif /* __CPM_85XX__ */
+++ /dev/null
-/*
- * Copyright 2004 Freescale Semiconductor, Inc.
- * Liberty Eran (liberty@freescale.com)
- */
-
-#ifndef __E300_H__
-#define __E300_H__
-
-#define PVR_E300C1 0x80830000
-#define PVR_E300C2 0x80840000
-#define PVR_E300C3 0x80850000
-#define PVR_E300C4 0x80860000
-
-/*
- * Hardware Implementation-Dependent Register 0 (HID0)
- */
-
-/* #define HID0 1008 already defined in processor.h */
-#define HID0_MASK_MACHINE_CHECK 0x00000000
-#define HID0_ENABLE_MACHINE_CHECK 0x80000000
-
-#define HID0_DISABLE_CACHE_PARITY 0x00000000
-#define HID0_ENABLE_CACHE_PARITY 0x40000000
-
-#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
-#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
-
-#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
-#define HID0_ENABLE_DATE_PARITY 0x10000000
-
-#define HID0_CORE_CLK_OUT 0x00000000
-#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
-
-#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
-#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
-
-#define HID0_DISABLE_DOSE_MODE 0x00000000
-#define HID0_ENABLE_DOSE_MODE 0x00800000
-
-#define HID0_DISABLE_NAP_MODE 0x00000000
-#define HID0_ENABLE_NAP_MODE 0x00400000
-
-#define HID0_DISABLE_SLEEP_MODE 0x00000000
-#define HID0_ENABLE_SLEEP_MODE 0x00200000
-
-#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
-#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
-
-#define HID0_SOFT_RESET 0x00010000
-
-#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
-#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
-
-#define HID0_DISABLE_DATA_CACHE 0x00000000
-#define HID0_ENABLE_DATA_CACHE 0x00004000
-
-#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
-
-#define HID0_LOCK_DATA_CACHE 0x00001000
-
-#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
-
-#define HID0_INVALIDATE_DATA_CACHE 0x00000400
-
-#define HID0_DISABLE_M_BIT 0x00000000
-#define HID0_ENABLE_M_BIT 0x00000080
-
-#define HID0_FBIOB 0x00000010
-
-#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
-#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
-
-#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
-#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
-
-/*
- * Hardware Implementation-Dependent Register 2 (HID2)
- */
-#define HID2 1011
-
-#define HID2_LET 0x08000000
-#define HID2_HBE 0x00040000
-#define HID2_IWLCK_000 0x00000000 /* no ways locked */
-#define HID2_IWLCK_001 0x00002000 /* way 0 locked */
-#define HID2_IWLCK_010 0x00004000 /* way 0 through way 1 locked */
-#define HID2_IWLCK_011 0x00006000 /* way 0 through way 2 locked */
-#define HID2_IWLCK_100 0x00008000 /* way 0 through way 3 locked */
-#define HID2_IWLCK_101 0x0000A000 /* way 0 through way 4 locked */
-#define HID2_IWLCK_110 0x0000C000 /* way 0 through way 5 locked */
-
-#endif /* __E300_H__ */
+++ /dev/null
-#include <asm-generic/errno.h>
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef DDR2_DIMM_PARAMS_H
-#define DDR2_DIMM_PARAMS_H
-
-/* Parameters for a DDR2 dimm computed from the SPD */
-typedef struct dimm_params_s {
-
- /* DIMM organization parameters */
- char mpart[19]; /* guaranteed null terminated */
-
- unsigned int n_ranks;
- unsigned long long rank_density;
- unsigned long long capacity;
- unsigned int data_width;
- unsigned int primary_sdram_width;
- unsigned int ec_sdram_width;
- unsigned int registered_dimm;
-
- /* SDRAM device parameters */
- unsigned int n_row_addr;
- unsigned int n_col_addr;
- unsigned int edc_config; /* 0 = none, 1 = parity, 2 = ECC */
- unsigned int n_banks_per_sdram_device;
- unsigned int burst_lengths_bitmask; /* BL=4 bit 2, BL=8 = bit 3 */
- unsigned int row_density;
-
- /* used in computing base address of DIMMs */
- unsigned long long base_address;
- /* mirrored DIMMs */
- unsigned int mirrored_dimm; /* only for ddr3 */
-
- /* DIMM timing parameters */
-
- unsigned int mtb_ps; /* medium timebase ps, only for ddr3 */
- unsigned int tAA_ps; /* minimum CAS latency time, only for ddr3 */
- unsigned int tFAW_ps; /* four active window delay, only for ddr3 */
-
- /*
- * SDRAM clock periods
- * The range for these are 1000-10000 so a short should be sufficient
- */
- unsigned int tCKmin_X_ps;
- unsigned int tCKmin_X_minus_1_ps;
- unsigned int tCKmin_X_minus_2_ps;
- unsigned int tCKmax_ps;
-
- /* SPD-defined CAS latencies */
- unsigned int caslat_X;
- unsigned int caslat_X_minus_1;
- unsigned int caslat_X_minus_2;
-
- unsigned int caslat_lowest_derated; /* Derated CAS latency */
-
- /* basic timing parameters */
- unsigned int tRCD_ps;
- unsigned int tRP_ps;
- unsigned int tRAS_ps;
-
- unsigned int tWR_ps; /* maximum = 63750 ps */
- unsigned int tWTR_ps; /* maximum = 63750 ps */
- unsigned int tRFC_ps; /* max = 255 ns + 256 ns + .75 ns
- = 511750 ps */
-
- unsigned int tRRD_ps; /* maximum = 63750 ps */
- unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
-
- unsigned int refresh_rate_ps;
-
- /* DDR3 doesn't need these as below */
- unsigned int tIS_ps; /* byte 32, spd->ca_setup */
- unsigned int tIH_ps; /* byte 33, spd->ca_hold */
- unsigned int tDS_ps; /* byte 34, spd->data_setup */
- unsigned int tDH_ps; /* byte 35, spd->data_hold */
- unsigned int tRTP_ps; /* byte 38, spd->trtp */
- unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
- unsigned int tQHS_ps; /* byte 45, spd->tqhs */
-} dimm_params_t;
-
-extern unsigned int ddr_compute_dimm_parameters(
- const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number);
-
-#endif
+++ /dev/null
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef FSL_DDR_MEMCTL_H
-#define FSL_DDR_MEMCTL_H
-
-/*
- * Pick a basic DDR Technology.
- */
-#include <ddr_spd.h>
-
-#define SDRAM_TYPE_DDR1 2
-#define SDRAM_TYPE_DDR2 3
-#define SDRAM_TYPE_LPDDR1 6
-#define SDRAM_TYPE_DDR3 7
-
-#define DDR_BL4 4 /* burst length 4 */
-#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */
-#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */
-#define DDR_BL8 8 /* burst length 8 */
-
-#if defined(CONFIG_FSL_DDR1)
-#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
-typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
-#ifndef CONFIG_FSL_SDRAM_TYPE
-#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1
-#endif
-#elif defined(CONFIG_FSL_DDR2)
-#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3)
-typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
-#ifndef CONFIG_FSL_SDRAM_TYPE
-#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2
-#endif
-#elif defined(CONFIG_FSL_DDR3)
-#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */
-typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
-#ifndef CONFIG_FSL_SDRAM_TYPE
-#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3
-#endif
-#endif /* #if defined(CONFIG_FSL_DDR1) */
-
-/* define bank(chip select) interleaving mode */
-#define FSL_DDR_CS0_CS1 0x40
-#define FSL_DDR_CS2_CS3 0x20
-#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
-#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
-
-/* define memory controller interleaving mode */
-#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0
-#define FSL_DDR_PAGE_INTERLEAVING 0x1
-#define FSL_DDR_BANK_INTERLEAVING 0x2
-#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3
-
-/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
- */
-#define SDRAM_CFG_MEM_EN 0x80000000
-#define SDRAM_CFG_SREN 0x40000000
-#define SDRAM_CFG_ECC_EN 0x20000000
-#define SDRAM_CFG_RD_EN 0x10000000
-#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000
-#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000
-#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000
-#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
-#define SDRAM_CFG_DYN_PWR 0x00200000
-#define SDRAM_CFG_32_BE 0x00080000
-#define SDRAM_CFG_8_BE 0x00040000
-#define SDRAM_CFG_NCAP 0x00020000
-#define SDRAM_CFG_2T_EN 0x00008000
-#define SDRAM_CFG_BI 0x00000001
-
-#if defined(CONFIG_P4080)
-#define RD_TO_PRE_MASK 0xf
-#define RD_TO_PRE_SHIFT 13
-#define WR_DATA_DELAY_MASK 0xf
-#define WR_DATA_DELAY_SHIFT 9
-#else
-#define RD_TO_PRE_MASK 0x7
-#define RD_TO_PRE_SHIFT 13
-#define WR_DATA_DELAY_MASK 0x7
-#define WR_DATA_DELAY_SHIFT 10
-#endif
-
-/* Record of register values computed */
-typedef struct fsl_ddr_cfg_regs_s {
- struct {
- unsigned int bnds;
- unsigned int config;
- unsigned int config_2;
- } cs[CONFIG_CHIP_SELECTS_PER_CTRL];
- unsigned int timing_cfg_3;
- unsigned int timing_cfg_0;
- unsigned int timing_cfg_1;
- unsigned int timing_cfg_2;
- unsigned int ddr_sdram_cfg;
- unsigned int ddr_sdram_cfg_2;
- unsigned int ddr_sdram_mode;
- unsigned int ddr_sdram_mode_2;
- unsigned int ddr_sdram_md_cntl;
- unsigned int ddr_sdram_interval;
- unsigned int ddr_data_init;
- unsigned int ddr_sdram_clk_cntl;
- unsigned int ddr_init_addr;
- unsigned int ddr_init_ext_addr;
- unsigned int timing_cfg_4;
- unsigned int timing_cfg_5;
- unsigned int ddr_zq_cntl;
- unsigned int ddr_wrlvl_cntl;
- unsigned int ddr_sr_cntr;
- unsigned int ddr_sdram_rcw_1;
- unsigned int ddr_sdram_rcw_2;
-} fsl_ddr_cfg_regs_t;
-
-typedef struct memctl_options_partial_s {
- unsigned int all_DIMMs_ECC_capable;
- unsigned int all_DIMMs_tCKmax_ps;
- unsigned int all_DIMMs_burst_lengths_bitmask;
- unsigned int all_DIMMs_registered;
- unsigned int all_DIMMs_unbuffered;
- /* unsigned int lowest_common_SPD_caslat; */
- unsigned int all_DIMMs_minimum_tRCD_ps;
-} memctl_options_partial_t;
-
-/*
- * Generalized parameters for memory controller configuration,
- * might be a little specific to the FSL memory controller
- */
-typedef struct memctl_options_s {
- /*
- * Memory organization parameters
- *
- * if DIMM is present in the system
- * where DIMMs are with respect to chip select
- * where chip selects are with respect to memory boundaries
- */
- unsigned int registered_dimm_en; /* use registered DIMM support */
-
- /* Options local to a Chip Select */
- struct cs_local_opts_s {
- unsigned int auto_precharge;
- unsigned int odt_rd_cfg;
- unsigned int odt_wr_cfg;
- } cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];
-
- /* Special configurations for chip select */
- unsigned int memctl_interleaving;
- unsigned int memctl_interleaving_mode;
- unsigned int ba_intlv_ctl;
-
- /* Operational mode parameters */
- unsigned int ECC_mode; /* Use ECC? */
- /* Initialize ECC using memory controller? */
- unsigned int ECC_init_using_memctl;
- unsigned int DQS_config; /* Use DQS? maybe only with DDR2? */
- /* SREN - self-refresh during sleep */
- unsigned int self_refresh_in_sleep;
- unsigned int dynamic_power; /* DYN_PWR */
- /* memory data width to use (16-bit, 32-bit, 64-bit) */
- unsigned int data_bus_width;
- unsigned int burst_length; /* BL4, OTF and BL8 */
- /* On-The-Fly Burst Chop enable */
- unsigned int OTF_burst_chop_en;
- /* mirrior DIMMs for DDR3 */
- unsigned int mirrored_dimm;
-
- /* Global Timing Parameters */
- unsigned int cas_latency_override;
- unsigned int cas_latency_override_value;
- unsigned int use_derated_caslat;
- unsigned int additive_latency_override;
- unsigned int additive_latency_override_value;
-
- unsigned int clk_adjust; /* */
- unsigned int cpo_override;
- unsigned int write_data_delay; /* DQS adjust */
-
- unsigned int wrlvl_override;
- unsigned int wrlvl_sample; /* Write leveling */
- unsigned int wrlvl_start;
-
- unsigned int half_strength_driver_enable;
- unsigned int twoT_en;
- unsigned int threeT_en;
- unsigned int bstopre;
- unsigned int tCKE_clock_pulse_width_ps; /* tCKE */
- unsigned int tFAW_window_four_activates_ps; /* tFAW -- FOUR_ACT */
-
- /* Rtt impedance */
- unsigned int rtt_override; /* rtt_override enable */
- unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */
- unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */
-
- /* Automatic self refresh */
- unsigned int auto_self_refresh_en;
- unsigned int sr_it;
- /* ZQ calibration */
- unsigned int zq_en;
- /* Write leveling */
- unsigned int wrlvl_en;
-} memctl_options_t;
-
-extern phys_size_t fsl_ddr_sdram(void);
-#endif
+++ /dev/null
-/*
- * Freescale DMA Controller
- *
- * Copyright 2006 Freescale Semiconductor, Inc.
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_FSL_DMA_H_
-#define _ASM_FSL_DMA_H_
-
-#include <asm/types.h>
-
-#ifdef CONFIG_MPC83xx
-typedef struct fsl_dma {
- uint mr; /* DMA mode register */
-#define FSL_DMA_MR_CS 0x00000001 /* Channel start */
-#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */
-#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */
-#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */
-#define FSL_DMA_MR_EOTIE 0x00000080 /* End-of-transfer interrupt en */
-#define FSL_DMA_MR_PRC_MASK 0x00000c00 /* PCI read command */
-#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */
-#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */
-#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */
-#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */
-#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */
-#define FSL_DMA_MR_IRQS 0x00080000 /* Interrupt steer */
-#define FSL_DMA_MR_DMSEN 0x00100000 /* Direct mode snooping en */
-#define FSL_DMA_MR_BWC_MASK 0x00e00000 /* Bandwidth/pause ctl */
-#define FSL_DMA_MR_DRCNT 0x0f000000 /* DMA request count */
- uint sr; /* DMA status register */
-#define FSL_DMA_SR_EOCDI 0x00000001 /* End-of-chain/direct interrupt */
-#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */
-#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */
-#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */
- uint cdar; /* DMA current descriptor address register */
- char res0[4];
- uint sar; /* DMA source address register */
- char res1[4];
- uint dar; /* DMA destination address register */
- char res2[4];
- uint bcr; /* DMA byte count register */
- uint ndar; /* DMA next descriptor address register */
- uint gsr; /* DMA general status register (DMA3 ONLY!) */
- char res3[84];
-} fsl_dma_t;
-#else
-typedef struct fsl_dma {
- uint mr; /* DMA mode register */
-#define FSL_DMA_MR_CS 0x00000001 /* Channel start */
-#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */
-#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */
-#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */
-#define FSL_DMA_MR_CA 0x00000008 /* Channel abort */
-#define FSL_DMA_MR_CDSM 0x00000010
-#define FSL_DMA_MR_XFE 0x00000020 /* Extended features en */
-#define FSL_DMA_MR_EIE 0x00000040 /* Error interrupt en */
-#define FSL_DMA_MR_EOLSIE 0x00000080 /* End-of-lists interrupt en */
-#define FSL_DMA_MR_EOLNIE 0x00000100 /* End-of-links interrupt en */
-#define FSL_DMA_MR_EOSIE 0x00000200 /* End-of-seg interrupt en */
-#define FSL_DMA_MR_SRW 0x00000400 /* Single register write */
-#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */
-#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */
-#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */
-#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */
-#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */
-#define FSL_DMA_MR_EMP_EN 0x00200000 /* Ext master pause en */
-#define FSL_DMA_MR_BWC_MASK 0x0f000000 /* Bandwidth/pause ctl */
-#define FSL_DMA_MR_BWC_DIS 0x0f000000 /* Bandwidth/pause ctl disable */
- uint sr; /* DMA status register */
-#define FSL_DMA_SR_EOLSI 0x00000001 /* End-of-list interrupt */
-#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */
-#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */
-#define FSL_DMA_SR_EOLNI 0x00000008 /* End-of-links interrupt */
-#define FSL_DMA_SR_PE 0x00000010 /* Programming error */
-#define FSL_DMA_SR_CH 0x00000020 /* Channel halted */
-#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */
- char res0[4];
- uint clndar; /* DMA current link descriptor address register */
- uint satr; /* DMA source attributes register */
-#define FSL_DMA_SATR_ESAD_MASK 0x000001ff /* Extended source addr */
-#define FSL_DMA_SATR_SREAD_NO_SNOOP 0x00040000 /* Read, don't snoop */
-#define FSL_DMA_SATR_SREAD_SNOOP 0x00050000 /* Read, snoop */
-#define FSL_DMA_SATR_SREAD_UNLOCK 0x00070000 /* Read, unlock l2 */
-#define FSL_DMA_SATR_STRAN_MASK 0x00f00000 /* Source interface */
-#define FSL_DMA_SATR_SSME 0x01000000 /* Source stride en */
-#define FSL_DMA_SATR_SPCIORDER 0x02000000 /* PCI transaction order */
-#define FSL_DMA_SATR_STFLOWLVL_MASK 0x0c000000 /* RIO flow level */
-#define FSL_DMA_SATR_SBPATRMU 0x20000000 /* Bypass ATMU */
- uint sar; /* DMA source address register */
- uint datr; /* DMA destination attributes register */
-#define FSL_DMA_DATR_EDAD_MASK 0x000001ff /* Extended dest addr */
-#define FSL_DMA_DATR_DWRITE_NO_SNOOP 0x00040000 /* Write, don't snoop */
-#define FSL_DMA_DATR_DWRITE_SNOOP 0x00050000 /* Write, snoop */
-#define FSL_DMA_DATR_DWRITE_ALLOC 0x00060000 /* Write, alloc l2 */
-#define FSL_DMA_DATR_DWRITE_LOCK 0x00070000 /* Write, lock l2 */
-#define FSL_DMA_DATR_DTRAN_MASK 0x00f00000 /* Dest interface */
-#define FSL_DMA_DATR_DSME 0x01000000 /* Dest stride en */
-#define FSL_DMA_DATR_DPCIORDER 0x02000000 /* PCI transaction order */
-#define FSL_DMA_DATR_DTFLOWLVL_MASK 0x0c000000 /* RIO flow level */
-#define FSL_DMA_DATR_DBPATRMU 0x20000000 /* Bypass ATMU */
- uint dar; /* DMA destination address register */
- uint bcr; /* DMA byte count register */
- char res1[4];
- uint nlndar; /* DMA next link descriptor address register */
- char res2[8];
- uint clabdar; /* DMA current List - alternate base descriptor address Register */
- char res3[4];
- uint nlsdar; /* DMA next list descriptor address register */
- uint ssr; /* DMA source stride register */
- uint dsr; /* DMA destination stride register */
- char res4[56];
-} fsl_dma_t;
-#endif /* !CONFIG_MPC83xx */
-
-#ifdef CONFIG_FSL_DMA
-void dma_init(void);
-int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t n);
-#if (defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
-void dma_meminit(uint val, uint size);
-#endif
-#endif
-
-#endif /* _ASM_DMA_H_ */
+++ /dev/null
-/*
- * Freescale I2C Controller
- *
- * Copyright 2006 Freescale Semiconductor, Inc.
- *
- * Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
- * Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
- * and Jeff Brown.
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_FSL_I2C_H_
-#define _ASM_FSL_I2C_H_
-
-#include <asm/types.h>
-
-typedef struct fsl_i2c {
-
- u8 adr; /* I2C slave address */
- u8 res0[3];
-#define I2C_ADR 0xFE
-#define I2C_ADR_SHIFT 1
-#define I2C_ADR_RES ~(I2C_ADR)
-
- u8 fdr; /* I2C frequency divider register */
- u8 res1[3];
-#define IC2_FDR 0x3F
-#define IC2_FDR_SHIFT 0
-#define IC2_FDR_RES ~(IC2_FDR)
-
- u8 cr; /* I2C control redister */
- u8 res2[3];
-#define I2C_CR_MEN 0x80
-#define I2C_CR_MIEN 0x40
-#define I2C_CR_MSTA 0x20
-#define I2C_CR_MTX 0x10
-#define I2C_CR_TXAK 0x08
-#define I2C_CR_RSTA 0x04
-#define I2C_CR_BCST 0x01
-
- u8 sr; /* I2C status register */
- u8 res3[3];
-#define I2C_SR_MCF 0x80
-#define I2C_SR_MAAS 0x40
-#define I2C_SR_MBB 0x20
-#define I2C_SR_MAL 0x10
-#define I2C_SR_BCSTM 0x08
-#define I2C_SR_SRW 0x04
-#define I2C_SR_MIF 0x02
-#define I2C_SR_RXAK 0x01
-
- u8 dr; /* I2C data register */
- u8 res4[3];
-#define I2C_DR 0xFF
-#define I2C_DR_SHIFT 0
-#define I2C_DR_RES ~(I2C_DR)
-
- u8 dfsrr; /* I2C digital filter sampling rate register */
- u8 res5[3];
-#define I2C_DFSRR 0x3F
-#define I2C_DFSRR_SHIFT 0
-#define I2C_DFSRR_RES ~(I2C_DR)
-
- /* Fill out the reserved block */
- u8 res6[0xE8];
-} fsl_i2c_t;
-
-#endif /* _ASM_I2C_H_ */
+++ /dev/null
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef _FSL_LAW_H_
-#define _FSL_LAW_H_
-
-#include <asm/io.h>
-
-#define LAW_EN 0x80000000
-
-#define SET_LAW_ENTRY(idx, a, sz, trgt) \
- { .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
-
-#define SET_LAW(a, sz, trgt) \
- { .index = -1, .addr = a, .size = sz, .trgt_id = trgt }
-
-enum law_size {
- LAW_SIZE_4K = 0xb,
- LAW_SIZE_8K,
- LAW_SIZE_16K,
- LAW_SIZE_32K,
- LAW_SIZE_64K,
- LAW_SIZE_128K,
- LAW_SIZE_256K,
- LAW_SIZE_512K,
- LAW_SIZE_1M,
- LAW_SIZE_2M,
- LAW_SIZE_4M,
- LAW_SIZE_8M,
- LAW_SIZE_16M,
- LAW_SIZE_32M,
- LAW_SIZE_64M,
- LAW_SIZE_128M,
- LAW_SIZE_256M,
- LAW_SIZE_512M,
- LAW_SIZE_1G,
- LAW_SIZE_2G,
- LAW_SIZE_4G,
- LAW_SIZE_8G,
- LAW_SIZE_16G,
- LAW_SIZE_32G,
-};
-
-#define law_size_bits(sz) (__ilog2_u64(sz) - 1)
-
-#ifdef CONFIG_FSL_CORENET
-enum law_trgt_if {
- LAW_TRGT_IF_PCIE_1 = 0x00,
- LAW_TRGT_IF_PCIE_2 = 0x01,
- LAW_TRGT_IF_PCIE_3 = 0x02,
- LAW_TRGT_IF_RIO_1 = 0x08,
- LAW_TRGT_IF_RIO_2 = 0x09,
-
- LAW_TRGT_IF_DDR_1 = 0x10,
- LAW_TRGT_IF_DDR_2 = 0x11, /* 2nd controller */
- LAW_TRGT_IF_DDR_INTRLV = 0x14,
-
- LAW_TRGT_IF_BMAN = 0x18,
- LAW_TRGT_IF_DCSR = 0x1d,
- LAW_TRGT_IF_LBC = 0x1f,
- LAW_TRGT_IF_QMAN = 0x3c,
-};
-#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1
-#else
-enum law_trgt_if {
- LAW_TRGT_IF_PCI = 0x00,
- LAW_TRGT_IF_PCI_2 = 0x01,
-#ifndef CONFIG_MPC8641
- LAW_TRGT_IF_PCIE_1 = 0x02,
-#endif
-#if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020)
- LAW_TRGT_IF_PCIE_3 = 0x03,
-#endif
- LAW_TRGT_IF_LBC = 0x04,
- LAW_TRGT_IF_CCSR = 0x08,
- LAW_TRGT_IF_DDR_INTRLV = 0x0b,
- LAW_TRGT_IF_RIO = 0x0c,
- LAW_TRGT_IF_RIO_2 = 0x0d,
- LAW_TRGT_IF_DDR = 0x0f,
- LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */
-};
-#define LAW_TRGT_IF_DDR_1 LAW_TRGT_IF_DDR
-#define LAW_TRGT_IF_PCI_1 LAW_TRGT_IF_PCI
-#define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI
-#define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2
-
-#ifdef CONFIG_MPC8641
-#define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI
-#endif
-
-#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020)
-#define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI
-#endif
-#endif /* CONFIG_FSL_CORENET */
-
-struct law_entry {
- int index;
- phys_addr_t addr;
- enum law_size size;
- enum law_trgt_if trgt_id;
-};
-
-extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
-extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
-extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
-extern int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id);
-extern struct law_entry find_law(phys_addr_t addr);
-extern void disable_law(u8 idx);
-extern void init_laws(void);
-extern void print_laws(void);
-
-/* define in board code */
-extern struct law_entry law_table[];
-extern int num_law_entries;
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#ifndef __ASM_PPC_FSL_LBC_H
-#define __ASM_PPC_FSL_LBC_H
-
-#include <config.h>
-
-/* BR - Base Registers
- */
-#define BR0 0x5000 /* Register offset to immr */
-#define BR1 0x5008
-#define BR2 0x5010
-#define BR3 0x5018
-#define BR4 0x5020
-#define BR5 0x5028
-#define BR6 0x5030
-#define BR7 0x5038
-
-#define BR_BA 0xFFFF8000
-#define BR_BA_SHIFT 15
-#define BR_XBA 0x00006000
-#define BR_XBA_SHIFT 13
-#define BR_PS 0x00001800
-#define BR_PS_SHIFT 11
-#define BR_PS_8 0x00000800 /* Port Size 8 bit */
-#define BR_PS_16 0x00001000 /* Port Size 16 bit */
-#define BR_PS_32 0x00001800 /* Port Size 32 bit */
-#define BR_DECC 0x00000600
-#define BR_DECC_SHIFT 9
-#define BR_DECC_OFF 0x00000000
-#define BR_DECC_CHK 0x00000200
-#define BR_DECC_CHK_GEN 0x00000400
-#define BR_WP 0x00000100
-#define BR_WP_SHIFT 8
-#define BR_MSEL 0x000000E0
-#define BR_MSEL_SHIFT 5
-#define BR_MS_GPCM 0x00000000 /* GPCM */
-#define BR_MS_FCM 0x00000020 /* FCM */
-#ifdef CONFIG_MPC83xx
-#define BR_MS_SDRAM 0x00000060 /* SDRAM */
-#elif defined(CONFIG_MPC85xx)
-#define BR_MS_SDRAM 0x00000000 /* SDRAM */
-#endif
-#define BR_MS_UPMA 0x00000080 /* UPMA */
-#define BR_MS_UPMB 0x000000A0 /* UPMB */
-#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#if !defined(CONFIG_MPC834x)
-#define BR_ATOM 0x0000000C
-#define BR_ATOM_SHIFT 2
-#endif
-#define BR_V 0x00000001
-#define BR_V_SHIFT 0
-
-#define UPMA 0
-#define UPMB 1
-#define UPMC 2
-
-#if defined(CONFIG_MPC834x)
-#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#else
-#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
-#endif
-
-/* Convert an address into the right format for the BR registers */
-#if defined(CONFIG_PHYS_64BIT) && !defined(CONFIG_FSL_ELBC)
-#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \
- ((x & 0x300000000ULL) >> 19)))
-#else
-#define BR_PHYS_ADDR(x) (x & 0xffff8000)
-#endif
-
-/* OR - Option Registers
- */
-#define OR0 0x5004 /* Register offset to immr */
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_GPCM_AM 0xFFFF8000
-#define OR_GPCM_AM_SHIFT 15
-#define OR_GPCM_XAM 0x00006000
-#define OR_GPCM_XAM_SHIFT 13
-#define OR_GPCM_BCTLD 0x00001000
-#define OR_GPCM_BCTLD_SHIFT 12
-#define OR_GPCM_CSNT 0x00000800
-#define OR_GPCM_CSNT_SHIFT 11
-#define OR_GPCM_ACS 0x00000600
-#define OR_GPCM_ACS_SHIFT 9
-#define OR_GPCM_ACS_DIV2 0x00000600
-#define OR_GPCM_ACS_DIV4 0x00000400
-#define OR_GPCM_XACS 0x00000100
-#define OR_GPCM_XACS_SHIFT 8
-#define OR_GPCM_SCY 0x000000F0
-#define OR_GPCM_SCY_SHIFT 4
-#define OR_GPCM_SCY_1 0x00000010
-#define OR_GPCM_SCY_2 0x00000020
-#define OR_GPCM_SCY_3 0x00000030
-#define OR_GPCM_SCY_4 0x00000040
-#define OR_GPCM_SCY_5 0x00000050
-#define OR_GPCM_SCY_6 0x00000060
-#define OR_GPCM_SCY_7 0x00000070
-#define OR_GPCM_SCY_8 0x00000080
-#define OR_GPCM_SCY_9 0x00000090
-#define OR_GPCM_SCY_10 0x000000a0
-#define OR_GPCM_SCY_11 0x000000b0
-#define OR_GPCM_SCY_12 0x000000c0
-#define OR_GPCM_SCY_13 0x000000d0
-#define OR_GPCM_SCY_14 0x000000e0
-#define OR_GPCM_SCY_15 0x000000f0
-#define OR_GPCM_SETA 0x00000008
-#define OR_GPCM_SETA_SHIFT 3
-#define OR_GPCM_TRLX 0x00000004
-#define OR_GPCM_TRLX_SHIFT 2
-#define OR_GPCM_EHTR 0x00000002
-#define OR_GPCM_EHTR_SHIFT 1
-#define OR_GPCM_EAD 0x00000001
-#define OR_GPCM_EAD_SHIFT 0
-
-/* helpers to convert values into an OR address mask (GPCM mode) */
-#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */
-#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20)
-
-#define OR_FCM_AM 0xFFFF8000
-#define OR_FCM_AM_SHIFT 15
-#define OR_FCM_XAM 0x00006000
-#define OR_FCM_XAM_SHIFT 13
-#define OR_FCM_BCTLD 0x00001000
-#define OR_FCM_BCTLD_SHIFT 12
-#define OR_FCM_PGS 0x00000400
-#define OR_FCM_PGS_SHIFT 10
-#define OR_FCM_CSCT 0x00000200
-#define OR_FCM_CSCT_SHIFT 9
-#define OR_FCM_CST 0x00000100
-#define OR_FCM_CST_SHIFT 8
-#define OR_FCM_CHT 0x00000080
-#define OR_FCM_CHT_SHIFT 7
-#define OR_FCM_SCY 0x00000070
-#define OR_FCM_SCY_SHIFT 4
-#define OR_FCM_SCY_1 0x00000010
-#define OR_FCM_SCY_2 0x00000020
-#define OR_FCM_SCY_3 0x00000030
-#define OR_FCM_SCY_4 0x00000040
-#define OR_FCM_SCY_5 0x00000050
-#define OR_FCM_SCY_6 0x00000060
-#define OR_FCM_SCY_7 0x00000070
-#define OR_FCM_RST 0x00000008
-#define OR_FCM_RST_SHIFT 3
-#define OR_FCM_TRLX 0x00000004
-#define OR_FCM_TRLX_SHIFT 2
-#define OR_FCM_EHTR 0x00000002
-#define OR_FCM_EHTR_SHIFT 1
-
-#define OR_UPM_AM 0xFFFF8000
-#define OR_UPM_AM_SHIFT 15
-#define OR_UPM_XAM 0x00006000
-#define OR_UPM_XAM_SHIFT 13
-#define OR_UPM_BCTLD 0x00001000
-#define OR_UPM_BCTLD_SHIFT 12
-#define OR_UPM_BI 0x00000100
-#define OR_UPM_BI_SHIFT 8
-#define OR_UPM_TRLX 0x00000004
-#define OR_UPM_TRLX_SHIFT 2
-#define OR_UPM_EHTR 0x00000002
-#define OR_UPM_EHTR_SHIFT 1
-#define OR_UPM_EAD 0x00000001
-#define OR_UPM_EAD_SHIFT 0
-
-#define OR_SDRAM_AM 0xFFFF8000
-#define OR_SDRAM_AM_SHIFT 15
-#define OR_SDRAM_XAM 0x00006000
-#define OR_SDRAM_XAM_SHIFT 13
-#define OR_SDRAM_COLS 0x00001C00
-#define OR_SDRAM_COLS_SHIFT 10
-#define OR_SDRAM_ROWS 0x000001C0
-#define OR_SDRAM_ROWS_SHIFT 6
-#define OR_SDRAM_PMSEL 0x00000020
-#define OR_SDRAM_PMSEL_SHIFT 5
-#define OR_SDRAM_EAD 0x00000001
-#define OR_SDRAM_EAD_SHIFT 0
-
-#define OR_AM_32KB 0xFFFF8000
-#define OR_AM_64KB 0xFFFF0000
-#define OR_AM_128KB 0xFFFE0000
-#define OR_AM_256KB 0xFFFC0000
-#define OR_AM_512KB 0xFFF80000
-#define OR_AM_1MB 0xFFF00000
-#define OR_AM_2MB 0xFFE00000
-#define OR_AM_4MB 0xFFC00000
-#define OR_AM_8MB 0xFF800000
-#define OR_AM_16MB 0xFF000000
-#define OR_AM_32MB 0xFE000000
-#define OR_AM_64MB 0xFC000000
-#define OR_AM_128MB 0xF8000000
-#define OR_AM_256MB 0xF0000000
-#define OR_AM_512MB 0xE0000000
-#define OR_AM_1GB 0xC0000000
-#define OR_AM_2GB 0x80000000
-#define OR_AM_4GB 0x00000000
-
-/* MxMR - UPM Machine A/B/C Mode Registers
- */
-#define MxMR_MAD_MSK 0x0000003f /* Machine Address Mask */
-#define MxMR_TLFx_MSK 0x000003c0 /* Refresh Loop Field Mask */
-#define MxMR_WLFx_MSK 0x00003c00 /* Write Loop Field Mask */
-#define MxMR_WLFx_1X 0x00000400 /* executed 1 time */
-#define MxMR_WLFx_2X 0x00000800 /* executed 2 times */
-#define MxMR_WLFx_3X 0x00000c00 /* executed 3 times */
-#define MxMR_WLFx_4X 0x00001000 /* executed 4 times */
-#define MxMR_WLFx_5X 0x00001400 /* executed 5 times */
-#define MxMR_WLFx_6X 0x00001800 /* executed 6 times */
-#define MxMR_WLFx_7X 0x00001c00 /* executed 7 times */
-#define MxMR_WLFx_8X 0x00002000 /* executed 8 times */
-#define MxMR_WLFx_9X 0x00002400 /* executed 9 times */
-#define MxMR_WLFx_10X 0x00002800 /* executed 10 times */
-#define MxMR_WLFx_11X 0x00002c00 /* executed 11 times */
-#define MxMR_WLFx_12X 0x00003000 /* executed 12 times */
-#define MxMR_WLFx_13X 0x00003400 /* executed 13 times */
-#define MxMR_WLFx_14X 0x00003800 /* executed 14 times */
-#define MxMR_WLFx_15X 0x00003c00 /* executed 15 times */
-#define MxMR_WLFx_16X 0x00000000 /* executed 16 times */
-#define MxMR_RLFx_MSK 0x0003c000 /* Read Loop Field Mask */
-#define MxMR_GPL_x4DIS 0x00040000 /* GPL_A4 Ouput Line Disable */
-#define MxMR_G0CLx_MSK 0x00380000 /* General Line 0 Control Mask */
-#define MxMR_DSx_1_CYCL 0x00000000 /* 1 cycle Disable Period */
-#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */
-#define MxMR_DSx_3_CYCL 0x00800000 /* 3 cycle Disable Period */
-#define MxMR_DSx_4_CYCL 0x00c00000 /* 4 cycle Disable Period */
-#define MxMR_DSx_MSK 0x00c00000 /* Disable Timer Period Mask */
-#define MxMR_AMx_MSK 0x07000000 /* Addess Multiplex Size Mask */
-#define MxMR_OP_NORM 0x00000000 /* Normal Operation */
-#define MxMR_OP_WARR 0x10000000 /* Write to Array */
-#define MxMR_OP_RARR 0x20000000 /* Read from Array */
-#define MxMR_OP_RUNP 0x30000000 /* Run Pattern */
-#define MxMR_OP_MSK 0x30000000 /* Command Opcode Mask */
-#define MxMR_RFEN 0x40000000 /* Refresh Enable */
-#define MxMR_BSEL 0x80000000 /* Bus Select */
-
-#define LBLAWAR_EN 0x80000000
-#define LBLAWAR_4KB 0x0000000B
-#define LBLAWAR_8KB 0x0000000C
-#define LBLAWAR_16KB 0x0000000D
-#define LBLAWAR_32KB 0x0000000E
-#define LBLAWAR_64KB 0x0000000F
-#define LBLAWAR_128KB 0x00000010
-#define LBLAWAR_256KB 0x00000011
-#define LBLAWAR_512KB 0x00000012
-#define LBLAWAR_1MB 0x00000013
-#define LBLAWAR_2MB 0x00000014
-#define LBLAWAR_4MB 0x00000015
-#define LBLAWAR_8MB 0x00000016
-#define LBLAWAR_16MB 0x00000017
-#define LBLAWAR_32MB 0x00000018
-#define LBLAWAR_64MB 0x00000019
-#define LBLAWAR_128MB 0x0000001A
-#define LBLAWAR_256MB 0x0000001B
-#define LBLAWAR_512MB 0x0000001C
-#define LBLAWAR_1GB 0x0000001D
-#define LBLAWAR_2GB 0x0000001E
-
-/* LBCR - Local Bus Configuration Register
- */
-#define LBCR_LDIS 0x80000000
-#define LBCR_LDIS_SHIFT 31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT 22
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT 17
-#define LBCR_EPAR 0x00010000
-#define LBCR_EPAR_SHIFT 16
-#define LBCR_BMT 0x0000FF00
-#define LBCR_BMT_SHIFT 8
-
-/* LCRR - Clock Ratio Register
- */
-#define LCRR_DBYP 0x80000000
-#define LCRR_DBYP_SHIFT 31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT 28
-#define LCRR_BUFCMDC_1 0x10000000
-#define LCRR_BUFCMDC_2 0x20000000
-#define LCRR_BUFCMDC_3 0x30000000
-#define LCRR_BUFCMDC_4 0x00000000
-#define LCRR_ECL 0x03000000
-#define LCRR_ECL_SHIFT 24
-#define LCRR_ECL_4 0x00000000
-#define LCRR_ECL_5 0x01000000
-#define LCRR_ECL_6 0x02000000
-#define LCRR_ECL_7 0x03000000
-#define LCRR_EADC 0x00030000
-#define LCRR_EADC_SHIFT 16
-#define LCRR_EADC_1 0x00010000
-#define LCRR_EADC_2 0x00020000
-#define LCRR_EADC_3 0x00030000
-#define LCRR_EADC_4 0x00000000
-/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit
- * should always be zero on older parts that have a four bit CLKDIV.
- */
-#define LCRR_CLKDIV 0x0000001F
-#define LCRR_CLKDIV_SHIFT 0
-#if defined(CONFIG_MPC83xx) || defined (CONFIG_MPC8540) || \
- defined(CONFIG_MPC8541) || defined (CONFIG_MPC8555) || \
- defined(CONFIG_MPC8560)
-#define LCRR_CLKDIV_2 0x00000002
-#define LCRR_CLKDIV_4 0x00000004
-#define LCRR_CLKDIV_8 0x00000008
-#elif defined(CONFIG_FSL_CORENET)
-#define LCRR_CLKDIV_8 0x00000002
-#define LCRR_CLKDIV_16 0x00000004
-#define LCRR_CLKDIV_32 0x00000008
-#else
-#define LCRR_CLKDIV_4 0x00000002
-#define LCRR_CLKDIV_8 0x00000004
-#define LCRR_CLKDIV_16 0x00000008
-#endif
-
-/* LTEDR - Transfer Error Check Disable Register
- */
-#define LTEDR_BMD 0x80000000 /* Bus monitor disable */
-#define LTEDR_PARD 0x20000000 /* Parity error checking disabled */
-#define LTEDR_WPD 0x04000000 /* Write protect error checking diable */
-#define LTEDR_WARA 0x00800000 /* Write-after-read-atomic error checking diable */
-#define LTEDR_RAWA 0x00400000 /* Read-after-write-atomic error checking disable */
-#define LTEDR_CSD 0x00080000 /* Chip select error checking disable */
-
-/* FMR - Flash Mode Register
- */
-#define FMR_CWTO 0x0000F000
-#define FMR_CWTO_SHIFT 12
-#define FMR_BOOT 0x00000800
-#define FMR_ECCM 0x00000100
-#define FMR_AL 0x00000030
-#define FMR_AL_SHIFT 4
-#define FMR_OP 0x00000003
-#define FMR_OP_SHIFT 0
-
-/* FIR - Flash Instruction Register
- */
-#define FIR_OP0 0xF0000000
-#define FIR_OP0_SHIFT 28
-#define FIR_OP1 0x0F000000
-#define FIR_OP1_SHIFT 24
-#define FIR_OP2 0x00F00000
-#define FIR_OP2_SHIFT 20
-#define FIR_OP3 0x000F0000
-#define FIR_OP3_SHIFT 16
-#define FIR_OP4 0x0000F000
-#define FIR_OP4_SHIFT 12
-#define FIR_OP5 0x00000F00
-#define FIR_OP5_SHIFT 8
-#define FIR_OP6 0x000000F0
-#define FIR_OP6_SHIFT 4
-#define FIR_OP7 0x0000000F
-#define FIR_OP7_SHIFT 0
-#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
-#define FIR_OP_CA 0x1 /* Issue current column address */
-#define FIR_OP_PA 0x2 /* Issue current block+page address */
-#define FIR_OP_UA 0x3 /* Issue user defined address */
-#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
-#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */
-
-/* FCR - Flash Command Register
- */
-#define FCR_CMD0 0xFF000000
-#define FCR_CMD0_SHIFT 24
-#define FCR_CMD1 0x00FF0000
-#define FCR_CMD1_SHIFT 16
-#define FCR_CMD2 0x0000FF00
-#define FCR_CMD2_SHIFT 8
-#define FCR_CMD3 0x000000FF
-#define FCR_CMD3_SHIFT 0
-/* FBAR - Flash Block Address Register
- */
-#define FBAR_BLK 0x00FFFFFF
-
-/* FPAR - Flash Page Address Register
- */
-#define FPAR_SP_PI 0x00007C00
-#define FPAR_SP_PI_SHIFT 10
-#define FPAR_SP_MS 0x00000200
-#define FPAR_SP_CI 0x000001FF
-#define FPAR_SP_CI_SHIFT 0
-#define FPAR_LP_PI 0x0003F000
-#define FPAR_LP_PI_SHIFT 12
-#define FPAR_LP_MS 0x00000800
-#define FPAR_LP_CI 0x000007FF
-#define FPAR_LP_CI_SHIFT 0
-
-/* LSDMR - SDRAM Machine Mode Register
- */
-#define LSDMR_RFEN (1 << (31 - 1))
-#define LSDMR_BSMA1516 (3 << (31 - 10))
-#define LSDMR_BSMA1617 (4 << (31 - 10))
-#define LSDMR_RFCR5 (3 << (31 - 16))
-#define LSDMR_RFCR16 (7 << (31 - 16))
-#define LSDMR_PRETOACT3 (3 << (31 - 19))
-#define LSDMR_PRETOACT7 (7 << (31 - 19))
-#define LSDMR_ACTTORW3 (3 << (31 - 22))
-#define LSDMR_ACTTORW7 (7 << (31 - 22))
-#define LSDMR_ACTTORW6 (6 << (31 - 22))
-#define LSDMR_BL8 (1 << (31 - 23))
-#define LSDMR_WRC2 (2 << (31 - 27))
-#define LSDMR_WRC4 (0 << (31 - 27))
-#define LSDMR_BUFCMD (1 << (31 - 29))
-#define LSDMR_CL3 (3 << (31 - 31))
-
-#define LSDMR_OP_NORMAL (0 << (31 - 4))
-#define LSDMR_OP_ARFRSH (1 << (31 - 4))
-#define LSDMR_OP_SRFRSH (2 << (31 - 4))
-#define LSDMR_OP_MRW (3 << (31 - 4))
-#define LSDMR_OP_PRECH (4 << (31 - 4))
-#define LSDMR_OP_PCHALL (5 << (31 - 4))
-#define LSDMR_OP_ACTBNK (6 << (31 - 4))
-#define LSDMR_OP_RWINV (7 << (31 - 4))
-
-/* LTESR - Transfer Error Status Register
- */
-#define LTESR_BM 0x80000000
-#define LTESR_FCT 0x40000000
-#define LTESR_PAR 0x20000000
-#define LTESR_WP 0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS 0x00080000
-#define LTESR_CC 0x00000001
-
-#ifndef __ASSEMBLY__
-/*
- * Local Bus Controller Registers.
- */
-typedef struct lbus_bank {
- u32 br; /* Base Register */
- u32 or; /* Option Register */
-} lbus_bank_t;
-
-typedef struct fsl_lbus {
- lbus_bank_t bank[8];
- u8 res0[0x28];
- u32 mar; /* UPM Address Register */
- u8 res1[0x4];
- u32 mamr; /* UPMA Mode Register */
- u32 mbmr; /* UPMB Mode Register */
- u32 mcmr; /* UPMC Mode Register */
- u8 res2[0x8];
- u32 mrtpr; /* Memory Refresh Timer Prescaler Register */
- u32 mdr; /* UPM Data Register */
- u8 res3[0x4];
- u32 lsor; /* Special Operation Initiation Register */
- u32 lsdmr; /* SDRAM Mode Register */
- u8 res4[0x8];
- u32 lurt; /* UPM Refresh Timer */
- u32 lsrt; /* SDRAM Refresh Timer */
- u8 res5[0x8];
- u32 ltesr; /* Transfer Error Status Register */
- u32 ltedr; /* Transfer Error Disable Register */
- u32 lteir; /* Transfer Error Interrupt Register */
- u32 lteatr; /* Transfer Error Attributes Register */
- u32 ltear; /* Transfer Error Address Register */
- u8 res6[0xC];
- u32 lbcr; /* Configuration Register */
- u32 lcrr; /* Clock Ratio Register */
- u8 res7[0x8];
- u32 fmr; /* Flash Mode Register */
- u32 fir; /* Flash Instruction Register */
- u32 fcr; /* Flash Command Register */
- u32 fbar; /* Flash Block Addr Register */
- u32 fpar; /* Flash Page Addr Register */
- u32 fbcr; /* Flash Byte Count Register */
- u8 res8[0xF08];
-} fsl_lbus_t;
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_PPC_FSL_LBC_H */
+++ /dev/null
-/*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef __FSL_PCI_H_
-#define __FSL_PCI_H_
-
-#include <asm/fsl_law.h>
-
-int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel);
-
-int fsl_setup_hose(struct pci_controller *hose, unsigned long addr);
-int fsl_is_pci_agent(struct pci_controller *hose);
-void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
-void fsl_pci_config_unlock(struct pci_controller *hose);
-void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose);
-
-/*
- * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
- */
-
-/*
- * PCI Translation Registers
- */
-typedef struct pci_outbound_window {
- u32 potar; /* 0x00 - Address */
- u32 potear; /* 0x04 - Address Extended */
- u32 powbar; /* 0x08 - Window Base Address */
- u32 res1;
- u32 powar; /* 0x10 - Window Attributes */
-#define POWAR_EN 0x80000000
-#define POWAR_IO_READ 0x00080000
-#define POWAR_MEM_READ 0x00040000
-#define POWAR_IO_WRITE 0x00008000
-#define POWAR_MEM_WRITE 0x00004000
- u32 res2[3];
-} pot_t;
-
-typedef struct pci_inbound_window {
- u32 pitar; /* 0x00 - Address */
- u32 res1;
- u32 piwbar; /* 0x08 - Window Base Address */
- u32 piwbear; /* 0x0c - Window Base Address Extended */
- u32 piwar; /* 0x10 - Window Attributes */
-#define PIWAR_EN 0x80000000
-#define PIWAR_PF 0x20000000
-#define PIWAR_LOCAL 0x00f00000
-#define PIWAR_READ_SNOOP 0x00050000
-#define PIWAR_WRITE_SNOOP 0x00005000
- u32 res2[3];
-} pit_t;
-
-/* PCI/PCI Express Registers */
-typedef struct ccsr_pci {
- u32 cfg_addr; /* 0x000 - PCI Configuration Address Register */
- u32 cfg_data; /* 0x004 - PCI Configuration Data Register */
- u32 int_ack; /* 0x008 - PCI Interrupt Acknowledge Register */
- u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */
- u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */
- u32 config; /* 0x014 - PCIE CONFIG Register */
- char res2[8];
- u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */
- u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
- u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
- u32 pm_command; /* 0x02c - PCIE PM Command register */
- char res4[3016]; /* (- #xbf8 #x30)3016 */
- u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
- u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
-
- pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
- u32 res5[64];
- pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
-#define PIT3 0
-#define PIT2 1
-#define PIT1 2
-
-#if 0
- u32 potar0; /* 0xc00 - PCI Outbound Transaction Address Register 0 */
- u32 potear0; /* 0xc04 - PCI Outbound Translation Extended Address Register 0 */
- char res5[8];
- u32 powar0; /* 0xc10 - PCI Outbound Window Attributes Register 0 */
- char res6[12];
- u32 potar1; /* 0xc20 - PCI Outbound Transaction Address Register 1 */
- u32 potear1; /* 0xc24 - PCI Outbound Translation Extended Address Register 1 */
- u32 powbar1; /* 0xc28 - PCI Outbound Window Base Address Register 1 */
- char res7[4];
- u32 powar1; /* 0xc30 - PCI Outbound Window Attributes Register 1 */
- char res8[12];
- u32 potar2; /* 0xc40 - PCI Outbound Transaction Address Register 2 */
- u32 potear2; /* 0xc44 - PCI Outbound Translation Extended Address Register 2 */
- u32 powbar2; /* 0xc48 - PCI Outbound Window Base Address Register 2 */
- char res9[4];
- u32 powar2; /* 0xc50 - PCI Outbound Window Attributes Register 2 */
- char res10[12];
- u32 potar3; /* 0xc60 - PCI Outbound Transaction Address Register 3 */
- u32 potear3; /* 0xc64 - PCI Outbound Translation Extended Address Register 3 */
- u32 powbar3; /* 0xc68 - PCI Outbound Window Base Address Register 3 */
- char res11[4];
- u32 powar3; /* 0xc70 - PCI Outbound Window Attributes Register 3 */
- char res12[12];
- u32 potar4; /* 0xc80 - PCI Outbound Transaction Address Register 4 */
- u32 potear4; /* 0xc84 - PCI Outbound Translation Extended Address Register 4 */
- u32 powbar4; /* 0xc88 - PCI Outbound Window Base Address Register 4 */
- char res13[4];
- u32 powar4; /* 0xc90 - PCI Outbound Window Attributes Register 4 */
- char res14[268];
- u32 pitar3; /* 0xda0 - PCI Inbound Translation Address Register 3 */
- char res15[4];
- u32 piwbar3; /* 0xda8 - PCI Inbound Window Base Address Register 3 */
- u32 piwbear3; /* 0xdac - PCI Inbound Window Base Extended Address Register 3 */
- u32 piwar3; /* 0xdb0 - PCI Inbound Window Attributes Register 3 */
- char res16[12];
- u32 pitar2; /* 0xdc0 - PCI Inbound Translation Address Register 2 */
- char res17[4];
- u32 piwbar2; /* 0xdc8 - PCI Inbound Window Base Address Register 2 */
- u32 piwbear2; /* 0xdcc - PCI Inbound Window Base Extended Address Register 2 */
- u32 piwar2; /* 0xdd0 - PCI Inbound Window Attributes Register 2 */
- char res18[12];
- u32 pitar1; /* 0xde0 - PCI Inbound Translation Address Register 1 */
- char res19[4];
- u32 piwbar1; /* 0xde8 - PCI Inbound Window Base Address Register 1 */
- char res20[4];
- u32 piwar1; /* 0xdf0 - PCI Inbound Window Attributes Register 1 */
- char res21[12];
-#endif
- u32 pedr; /* 0xe00 - PCI Error Detect Register */
- u32 pecdr; /* 0xe04 - PCI Error Capture Disable Register */
- u32 peer; /* 0xe08 - PCI Error Interrupt Enable Register */
- u32 peattrcr; /* 0xe0c - PCI Error Attributes Capture Register */
- u32 peaddrcr; /* 0xe10 - PCI Error Address Capture Register */
-/* u32 perr_disr * 0xe10 - PCIE Erorr Disable Register */
- u32 peextaddrcr; /* 0xe14 - PCI Error Extended Address Capture Register */
- u32 pedlcr; /* 0xe18 - PCI Error Data Low Capture Register */
- u32 pedhcr; /* 0xe1c - PCI Error Error Data High Capture Register */
- u32 gas_timr; /* 0xe20 - PCI Gasket Timer Register */
-/* u32 perr_cap_stat; * 0xe20 - PCIE Error Capture Status Register */
- char res22[4];
- u32 perr_cap0; /* 0xe28 - PCIE Error Capture Register 0 */
- u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
- u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
- u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
- char res23[200];
- u32 pdb_stat; /* 0xf00 - PCIE Debug Status */
- char res24[252];
-} ccsr_fsl_pci_t;
-
-struct fsl_pci_info {
- unsigned long regs;
- pci_addr_t mem_bus;
- phys_size_t mem_phys;
- pci_size_t mem_size;
- pci_addr_t io_bus;
- phys_size_t io_phys;
- pci_size_t io_size;
- int pci_num;
-};
-
-int fsl_pci_init_port(struct fsl_pci_info *pci_info,
- struct pci_controller *hose, int busno);
-
-#define SET_STD_PCI_INFO(x, num) \
-{ \
- x.regs = CONFIG_SYS_PCI##num##_ADDR; \
- x.mem_bus = CONFIG_SYS_PCI##num##_MEM_BUS; \
- x.mem_phys = CONFIG_SYS_PCI##num##_MEM_PHYS; \
- x.mem_size = CONFIG_SYS_PCI##num##_MEM_SIZE; \
- x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \
- x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \
- x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \
- x.pci_num = num; \
-}
-
-#define SET_STD_PCIE_INFO(x, num) \
-{ \
- x.regs = CONFIG_SYS_PCIE##num##_ADDR; \
- x.mem_bus = CONFIG_SYS_PCIE##num##_MEM_BUS; \
- x.mem_phys = CONFIG_SYS_PCIE##num##_MEM_PHYS; \
- x.mem_size = CONFIG_SYS_PCIE##num##_MEM_SIZE; \
- x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \
- x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \
- x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \
- x.pci_num = num; \
-}
-
-#endif
+++ /dev/null
-#ifndef __FSL_SERDES_H
-#define __FSL_SERDES_H
-
-#include <config.h>
-
-#define FSL_SERDES_CLK_100 (0 << 28)
-#define FSL_SERDES_CLK_125 (1 << 28)
-#define FSL_SERDES_CLK_150 (3 << 28)
-#define FSL_SERDES_PROTO_SATA 0
-#define FSL_SERDES_PROTO_PEX 1
-#define FSL_SERDES_PROTO_PEX_X2 2
-#define FSL_SERDES_PROTO_SGMII 3
-#define FSL_SERDES_VDD_1V 1
-
-#ifdef CONFIG_FSL_SERDES
-extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd);
-#else
-static void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd) {}
-#endif /* CONFIG_FSL_SERDES */
-
-#endif /* __FSL_SERDES_H */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_GBL_DATA_H
-#define __ASM_GBL_DATA_H
-
-#include "config.h"
-#include "asm/types.h"
-
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned long baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
-#if defined(CONFIG_8xx)
- unsigned long brg_clk;
-#endif
-#if defined(CONFIG_CPM2)
- /* There are many clocks on the MPC8260 - see page 9-5 */
- unsigned long vco_out;
- unsigned long cpm_clk;
- unsigned long scc_clk;
- unsigned long brg_clk;
-#ifdef CONFIG_PCI
- unsigned long pci_clk;
-#endif
-#endif
- unsigned long mem_clk;
-#if defined(CONFIG_MPC83xx)
- /* There are other clocks in the MPC83XX */
- u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- u32 tsec1_clk;
- u32 tsec2_clk;
- u32 usbdr_clk;
-#endif
-#if defined (CONFIG_MPC834x)
- u32 usbmph_clk;
-#endif /* CONFIG_MPC834x */
-#if defined(CONFIG_MPC8315)
- u32 tdm_clk;
-#endif
- u32 core_clk;
- u32 enc_clk;
- u32 lbiu_clk;
- u32 lclk_clk;
- u32 pci_clk;
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
- u32 pciexp1_clk;
- u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- u32 sata_clk;
-#endif
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
-#if defined(CONFIG_FSL_ESDHC)
- u32 sdhc_clk;
-#endif
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- u32 lbc_clk;
- void *cpu;
-#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- u32 i2c1_clk;
- u32 i2c2_clk;
-#endif
-#if defined(CONFIG_QE)
- u32 qe_clk;
- u32 brg_clk;
- uint mp_alloc_base;
- uint mp_alloc_top;
-#endif /* CONFIG_QE */
-#if defined(CONFIG_FSL_LAW)
- u32 used_laws;
-#endif
-#if defined(CONFIG_E500)
- u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
-#endif
-#if defined(CONFIG_MPC5xxx)
- unsigned long ipb_clk;
- unsigned long pci_clk;
-#endif
-#if defined(CONFIG_MPC512X)
- u32 ips_clk;
- u32 csb_clk;
- u32 pci_clk;
-#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC8220)
- unsigned long bExtUart;
- unsigned long inp_clk;
- unsigned long pci_clk;
- unsigned long vco_clk;
- unsigned long pev_clk;
- unsigned long flb_clk;
-#endif
- phys_size_t ram_size; /* RAM size */
- unsigned long reset_status; /* reset status register at boot */
-#if defined(CONFIG_MPC83xx)
- unsigned long arbiter_event_attributes;
- unsigned long arbiter_event_address;
-#endif
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long have_console; /* serial_init() was called */
-#if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
- unsigned int dp_alloc_base;
- unsigned int dp_alloc_top;
-#endif
-#if defined(CONFIG_4xx)
- u32 uart_clk;
-#endif /* CONFIG_4xx */
-#if defined(CONFIG_SYS_GT_6426x)
- unsigned int mirror_hack[16];
-#endif
-#if defined(CONFIG_A3000) || \
- defined(CONFIG_HIDDEN_DRAGON) || \
- defined(CONFIG_MUSENKI) || \
- defined(CONFIG_SANDPOINT)
- void * console_addr;
-#endif
- unsigned long relocaddr; /* Start address of U-Boot in RAM */
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
- unsigned long fb_base; /* Base address of framebuffer memory */
-#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
-#ifdef CONFIG_BOARD_TYPES
- unsigned long board_type;
-#endif
-#ifdef CONFIG_MODEM_SUPPORT
- unsigned long do_mdm_init;
- unsigned long be_quiet;
-#endif
-#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
- unsigned long kbd_status;
-#endif
-#if defined(CONFIG_WD_MAX_RATE)
- unsigned long long wdt_last; /* trace watch-dog triggering rate */
-#endif
- void **jt; /* jump table */
-} gd_t;
-
-/*
- * Global Data Flags
- */
-#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
-#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
-#define GD_FLG_SILENT 0x00004 /* Silent mode */
-#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
-#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
-#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
-#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
-
-#if 1
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
-#else /* We could use plain global data, but the resulting code is bigger */
-#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
-#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
- gd_t *gd
-#endif
-
-#endif /* __ASM_GBL_DATA_H */
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_PPC_GPIO_H
-#define __ASM_PPC_GPIO_H
-
-#include <asm/types.h>
-
-/* 4xx PPC's have 2 GPIO controllers */
-#if defined(CONFIG_405EZ) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define GPIO_GROUP_MAX 2
-#else
-#define GPIO_GROUP_MAX 1
-#endif
-
-/* GPIO controller */
-struct ppc4xx_gpio {
- u32 or; /* Output Control */
- u32 tcr; /* Tri-State Control */
- u32 osl; /* Output Select 16..31 */
- u32 osh; /* Output Select 0..15 */
- u32 tsl; /* Tri-State Select 16..31 */
- u32 tsh; /* Tri-State Select 0..15 */
- u32 odr; /* Open Drain */
- u32 ir; /* Input */
- u32 rr1; /* Receive Register 1 */
- u32 rr2; /* Receive Register 2 */
- u32 rr3; /* Receive Register 3 */
- u32 reserved;
- u32 is1l; /* Input Select 1 16..31 */
- u32 is1h; /* Input Select 1 0..15 */
- u32 is2l; /* Input Select 2 16..31 */
- u32 is2h; /* Input Select 2 0..15 */
- u32 is3l; /* Input Select 3 16..31 */
- u32 is3h; /* Input Select 3 0..15 */
-};
-
-/* Offsets */
-#define GPIOx_OR 0x00 /* GPIO Output Register */
-#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
-#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
-#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
-#define GPIOx_IR 0x1C /* GPIO Input Register */
-#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
-#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
-#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
-#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
-
-#define GPIO_OR(x) (x+GPIOx_OR) /* GPIO Output Register */
-#define GPIO_TCR(x) (x+GPIOx_TCR) /* GPIO Three-State Control Register */
-#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Select Register High or Low */
-#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
-#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
-#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
-
-#define GPIO0 0
-#define GPIO1 1
-
-#define GPIO_MAX 32
-#define GPIO_ALT1_SEL 0x40000000
-#define GPIO_ALT2_SEL 0x80000000
-#define GPIO_ALT3_SEL 0xc0000000
-#define GPIO_IN_SEL 0x40000000
-#define GPIO_MASK 0xc0000000
-
-#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
-
-#ifndef __ASSEMBLY__
-typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
-typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
-typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
-
-typedef struct {
- unsigned long add; /* gpio core base address */
- gpio_driver_t in_out; /* Driver Setting */
- gpio_select_t alt_nb; /* Selected Alternate */
- gpio_out_t out_val;/* Default Output Value */
-} gpio_param_s;
-#endif
-
-void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
-void gpio_write_bit(int pin, int val);
-int gpio_read_out_bit(int pin);
-int gpio_read_in_bit(int pin);
-void gpio_set_chip_configuration(void);
-
-#endif /* __ASM_PPC_GPIO_H */
+++ /dev/null
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * MPC512x Internal Memory Map
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC83xx header.
- */
-
-#ifndef __IMMAP_512x__
-#define __IMMAP_512x__
-
-#include <asm/types.h>
-#if defined(CONFIG_E300)
-#include <asm/e300.h>
-#endif
-
-/*
- * System reset offset (PowerPC standard)
- */
-#define EXC_OFF_SYS_RESET 0x0100
-#define _START_OFFSET EXC_OFF_SYS_RESET
-
-#define SPR_5121E 0x80180000
-
-/*
- * IMMRBAR - Internal Memory Register Base Address
- */
-#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
-#define IMMRBAR 0x0000 /* Register offset to immr */
-#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
-#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
-
-
-#ifndef __ASSEMBLY__
-typedef struct law512x {
- u32 bar; /* Base Addr Register */
- u32 ar; /* Attributes Register */
-} law512x_t;
-
-/*
- * System configuration registers
- */
-typedef struct sysconf512x {
- u32 immrbar; /* Internal memory map base address register */
- u8 res0[0x1c];
- u32 lpbaw; /* LP Boot Access Window */
- u32 lpcs0aw; /* LP CS0 Access Window */
- u32 lpcs1aw; /* LP CS1 Access Window */
- u32 lpcs2aw; /* LP CS2 Access Window */
- u32 lpcs3aw; /* LP CS3 Access Window */
- u32 lpcs4aw; /* LP CS4 Access Window */
- u32 lpcs5aw; /* LP CS5 Access Window */
- u32 lpcs6aw; /* LP CS6 Access Window */
- u32 lpcs7aw; /* LP CS7 Access Window */
- u8 res1[0x1c];
- law512x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */
- u8 res2[0x28];
- law512x_t ddrlaw; /* DDR Local Access Window */
- u8 res3[0x18];
- u32 mbxbar; /* MBX Base Address */
- u32 srambar; /* SRAM Base Address */
- u32 nfcbar; /* NFC Base Address */
- u8 res4[0x34];
- u32 spridr; /* System Part and Revision ID Register */
- u32 spcr; /* System Priority Configuration Register */
- u8 res5[0xf8];
-} sysconf512x_t;
-
-#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */
-
-/*
- * Watch Dog Timer (WDT) Registers
- */
-typedef struct wdt512x {
- u8 res0[4];
- u32 swcrr; /* System watchdog control register */
- u32 swcnr; /* System watchdog count register */
- u8 res1[2];
- u16 swsrr; /* System watchdog service register */
- u8 res2[0xF0];
-} wdt512x_t;
-
-/*
- * RTC Module Registers
- */
-typedef struct rtclk512x {
- u8 fixme[0x100];
-} rtclk512x_t;
-
-/*
- * General Purpose Timer
- */
-typedef struct gpt512x {
- u8 fixme[0x100];
-} gpt512x_t;
-
-/*
- * Integrated Programmable Interrupt Controller
- */
-typedef struct ipic512x {
- u8 fixme[0x100];
-} ipic512x_t;
-
-/*
- * System Arbiter Registers
- */
-typedef struct arbiter512x {
- u32 acr; /* Arbiter Configuration Register */
- u32 atr; /* Arbiter Timers Register */
- u32 ater; /* Arbiter Transfer Error Register */
- u32 aer; /* Arbiter Event Register */
- u32 aidr; /* Arbiter Interrupt Definition Register */
- u32 amr; /* Arbiter Mask Register */
- u32 aeatr; /* Arbiter Event Attributes Register */
- u32 aeadr; /* Arbiter Event Address Register */
- u32 aerr; /* Arbiter Event Response Register */
- u8 res1[0xDC];
-} arbiter512x_t;
-
-/*
- * Reset Module
- */
-typedef struct reset512x {
- u32 rcwl; /* Reset Configuration Word Low Register */
- u32 rcwh; /* Reset Configuration Word High Register */
- u8 res0[8];
- u32 rsr; /* Reset Status Register */
- u32 rmr; /* Reset Mode Register */
- u32 rpr; /* Reset protection Register */
- u32 rcr; /* Reset Control Register */
- u32 rcer; /* Reset Control Enable Register */
- u8 res1[0xDC];
-} reset512x_t;
-
-/* RSR - Reset Status Register */
-#define RSR_SWSR 0x00002000 /* software soft reset */
-#define RSR_SWHR 0x00001000 /* software hard reset */
-#define RSR_JHRS 0x00000200 /* jtag hreset */
-#define RSR_JSRS 0x00000100 /* jtag sreset status */
-#define RSR_CSHR 0x00000010 /* checkstop reset status */
-#define RSR_SWRS 0x00000008 /* software watchdog reset status */
-#define RSR_BMRS 0x00000004 /* bus monitop reset status */
-#define RSR_SRS 0x00000002 /* soft reset status */
-#define RSR_HRS 0x00000001 /* hard reset status */
-#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\
- RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
- RSR_BMRS | RSR_SRS | RSR_HRS)
-
-/* RMR - Reset Mode Register */
-#define RMR_CSRE 0x00000001 /* checkstop reset enable */
-#define RMR_CSRE_SHIFT 0
-#define RMR_RES (~(RMR_CSRE))
-
-/* RCR - Reset Control Register */
-#define RCR_SWHR 0x00000002 /* software hard reset */
-#define RCR_SWSR 0x00000001 /* software soft reset */
-#define RCR_RES (~(RCR_SWHR | RCR_SWSR))
-
-/* RCER - Reset Control Enable Register */
-#define RCER_CRE 0x00000001 /* software hard reset */
-#define RCER_RES (~(RCER_CRE))
-
-/*
- * Clock Module
- */
-typedef struct clk512x {
- u32 spmr; /* System PLL Mode Register */
- u32 sccr[2]; /* System Clock Control Registers */
- u32 scfr[2]; /* System Clock Frequency Registers */
- u8 res0[4];
- u32 bcr; /* Bread Crumb Register */
- u32 pscccr[12]; /* PSC0-11 Clock Control Registers */
- u32 spccr; /* SPDIF Clock Control Register */
- u32 cccr; /* CFM Clock Control Register */
- u32 dccr; /* DIU Clock Control Register */
- u32 msccr[4]; /* MSCAN1-4 Clock Control Registers */
- u8 res1[0x98];
-} clk512x_t;
-
-/* SPMR - System PLL Mode Register */
-#define SPMR_SPMF 0x0F000000
-#define SPMR_SPMF_SHIFT 24
-#define SPMR_CPMF 0x000F0000
-#define SPMR_CPMF_SHIFT 16
-
-/* System Clock Control Register 1 commands */
-#define CLOCK_SCCR1_CFG_EN 0x80000000
-#define CLOCK_SCCR1_LPC_EN 0x40000000
-#define CLOCK_SCCR1_NFC_EN 0x20000000
-#define CLOCK_SCCR1_PATA_EN 0x10000000
-#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn))
-#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000
-#define CLOCK_SCCR1_SATA_EN 0x00004000
-#define CLOCK_SCCR1_FEC_EN 0x00002000
-#define CLOCK_SCCR1_TPR_EN 0x00001000
-#define CLOCK_SCCR1_PCI_EN 0x00000800
-#define CLOCK_SCCR1_DDR_EN 0x00000400
-
-/* System Clock Control Register 2 commands */
-#define CLOCK_SCCR2_DIU_EN 0x80000000
-#define CLOCK_SCCR2_AXE_EN 0x40000000
-#define CLOCK_SCCR2_MEM_EN 0x20000000
-#define CLOCK_SCCR2_USB1_EN 0x10000000
-#define CLOCK_SCCR2_USB2_EN 0x08000000
-#define CLOCK_SCCR2_I2C_EN 0x04000000
-#define CLOCK_SCCR2_BDLC_EN 0x02000000
-#define CLOCK_SCCR2_SDHC_EN 0x01000000
-#define CLOCK_SCCR2_SPDIF_EN 0x00800000
-#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000
-#define CLOCK_SCCR2_MBX_EN 0x00200000
-#define CLOCK_SCCR2_MBX_3D_EN 0x00100000
-#define CLOCK_SCCR2_IIM_EN 0x00080000
-
-/* SCFR1 System Clock Frequency Register 1 */
-#define SCFR1_IPS_DIV 0x3
-#define SCFR1_IPS_DIV_MASK 0x03800000
-#define SCFR1_IPS_DIV_SHIFT 23
-
-#define SCFR1_PCI_DIV 0x6
-#define SCFR1_PCI_DIV_MASK 0x00700000
-#define SCFR1_PCI_DIV_SHIFT 20
-
-#define SCFR1_LPC_DIV_MASK 0x00003800
-#define SCFR1_LPC_DIV_SHIFT 11
-
-/* SCFR2 System Clock Frequency Register 2 */
-#define SCFR2_SYS_DIV 0xFC000000
-#define SCFR2_SYS_DIV_SHIFT 26
-
-/* SPCR - System Priority Configuration Register */
-#define SPCR_TBEN 0x00400000 /* E300 core time base unit enable */
-
-/*
- * Power Management Control Module
- */
-typedef struct pmc512x {
- u8 fixme[0x100];
-} pmc512x_t;
-
-/*
- * General purpose I/O module
- */
-typedef struct gpio512x {
- u32 gpdir;
- u32 gpodr;
- u32 gpdat;
- u32 gpier;
- u32 gpimr;
- u32 gpicr1;
- u32 gpicr2;
- u8 res0[0xE4];
-} gpio512x_t;
-
-/*
- * DDR Memory Controller Memory Map
- */
-typedef struct ddr512x {
- u32 ddr_sys_config; /* System Configuration Register */
- u32 ddr_time_config0; /* Timing Configuration Register */
- u32 ddr_time_config1; /* Timing Configuration Register */
- u32 ddr_time_config2; /* Timing Configuration Register */
- u32 ddr_command; /* Command Register */
- u32 ddr_compact_command; /* Compact Command Register */
- u32 self_refresh_cmd_0; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_1; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_2; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_3; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_4; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_5; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_6; /* Enter/Exit Self Refresh Registers */
- u32 self_refresh_cmd_7; /* Enter/Exit Self Refresh Registers */
- u32 DQS_config_offset_count; /* DQS Config Offset Count */
- u32 DQS_config_offset_time; /* DQS Config Offset Time */
- u32 DQS_delay_status; /* DQS Delay Status */
- u32 res0[0xF];
- u32 prioman_config1; /* Priority Manager Configuration */
- u32 prioman_config2; /* Priority Manager Configuration */
- u32 hiprio_config; /* High Priority Configuration */
- u32 lut_table0_main_upper; /* LUT0 Main Upper */
- u32 lut_table1_main_upper; /* LUT1 Main Upper */
- u32 lut_table2_main_upper; /* LUT2 Main Upper */
- u32 lut_table3_main_upper; /* LUT3 Main Upper */
- u32 lut_table4_main_upper; /* LUT4 Main Upper */
- u32 lut_table0_main_lower; /* LUT0 Main Lower */
- u32 lut_table1_main_lower; /* LUT1 Main Lower */
- u32 lut_table2_main_lower; /* LUT2 Main Lower */
- u32 lut_table3_main_lower; /* LUT3 Main Lower */
- u32 lut_table4_main_lower; /* LUT4 Main Lower */
- u32 lut_table0_alternate_upper; /* LUT0 Alternate Upper */
- u32 lut_table1_alternate_upper; /* LUT1 Alternate Upper */
- u32 lut_table2_alternate_upper; /* LUT2 Alternate Upper */
- u32 lut_table3_alternate_upper; /* LUT3 Alternate Upper */
- u32 lut_table4_alternate_upper; /* LUT4 Alternate Upper */
- u32 lut_table0_alternate_lower; /* LUT0 Alternate Lower */
- u32 lut_table1_alternate_lower; /* LUT1 Alternate Lower */
- u32 lut_table2_alternate_lower; /* LUT2 Alternate Lower */
- u32 lut_table3_alternate_lower; /* LUT3 Alternate Lower */
- u32 lut_table4_alternate_lower; /* LUT4 Alternate Lower */
- u32 performance_monitor_config;
- u32 event_time_counter;
- u32 event_time_preset;
- u32 performance_monitor1_address_low;
- u32 performance_monitor2_address_low;
- u32 performance_monitor1_address_hi;
- u32 performance_monitor2_address_hi;
- u32 res1[2];
- u32 performance_monitor1_read_counter;
- u32 performance_monitor2_read_counter;
- u32 performance_monitor1_write_counter;
- u32 performance_monitor2_write_counter;
- u32 granted_ack_counter0;
- u32 granted_ack_counter1;
- u32 granted_ack_counter2;
- u32 granted_ack_counter3;
- u32 granted_ack_counter4;
- u32 cumulative_wait_counter0;
- u32 cumulative_wait_counter1;
- u32 cumulative_wait_counter2;
- u32 cumulative_wait_counter3;
- u32 cumulative_wait_counter4;
- u32 summed_priority_counter0;
- u32 summed_priority_counter1;
- u32 summed_priority_counter2;
- u32 summed_priority_counter3;
- u32 summed_priority_counter4;
- u32 res2[0x3AD];
-} ddr512x_t;
-
-/* MDDRC SYS CFG and Timing CFG0 Registers */
-#define MDDRC_SYS_CFG_EN 0xF0000000
-#define MDDRC_SYS_CFG_CMD_MASK 0x10000000
-#define MDDRC_REFRESH_ZERO_MASK 0x0000FFFF
-
-/*
- * DDR Memory Controller Configuration settings
- */
-typedef struct ddr512x_config {
- u32 ddr_sys_config; /* System Configuration Register */
- u32 ddr_time_config0; /* Timing Configuration Register */
- u32 ddr_time_config1; /* Timing Configuration Register */
- u32 ddr_time_config2; /* Timing Configuration Register */
-} ddr512x_config_t;
-
-/*
- * DMA/Messaging Unit
- */
-typedef struct dma512x {
- u8 fixme[0x1800];
-} dma512x_t;
-
-/*
- * PCI Software Configuration Registers
- */
-typedef struct pciconf512x {
- u32 config_address;
- u32 config_data;
- u32 int_ack;
- u8 res[116];
-} pciconf512x_t;
-
-/*
- * PCI Outbound Translation Register
- */
-typedef struct pci_outbound_window {
- u32 potar;
- u8 res0[4];
- u32 pobar;
- u8 res1[4];
- u32 pocmr;
- u8 res2[4];
-} pot512x_t;
-
-/* POTAR - PCI Outbound Translation Address Register */
-#define POTAR_TA_MASK 0x000fffff
-
-/* POBAR - PCI Outbound Base Address Register */
-#define POBAR_BA_MASK 0x000fffff
-
-/* POCMR - PCI Outbound Comparision Mask Register */
-#define POCMR_EN 0x80000000
-#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */
-#define POCMR_PRE 0x20000000 /* prefetch enable */
-#define POCMR_SBS 0x00100000 /* special byte swap enable */
-#define POCMR_CM_MASK 0x000fffff
-#define POCMR_CM_4G 0x00000000
-#define POCMR_CM_2G 0x00080000
-#define POCMR_CM_1G 0x000C0000
-#define POCMR_CM_512M 0x000E0000
-#define POCMR_CM_256M 0x000F0000
-#define POCMR_CM_128M 0x000F8000
-#define POCMR_CM_64M 0x000FC000
-#define POCMR_CM_32M 0x000FE000
-#define POCMR_CM_16M 0x000FF000
-#define POCMR_CM_8M 0x000FF800
-#define POCMR_CM_4M 0x000FFC00
-#define POCMR_CM_2M 0x000FFE00
-#define POCMR_CM_1M 0x000FFF00
-#define POCMR_CM_512K 0x000FFF80
-#define POCMR_CM_256K 0x000FFFC0
-#define POCMR_CM_128K 0x000FFFE0
-#define POCMR_CM_64K 0x000FFFF0
-#define POCMR_CM_32K 0x000FFFF8
-#define POCMR_CM_16K 0x000FFFFC
-#define POCMR_CM_8K 0x000FFFFE
-#define POCMR_CM_4K 0x000FFFFF
-
-/*
- * Sequencer
- */
-typedef struct ios512x {
- pot512x_t pot[6];
- u8 res0[0x60];
- u32 pmcr;
- u8 res1[4];
- u32 dtcr;
- u8 res2[4];
-} ios512x_t;
-
-/*
- * PCI Controller
- */
-typedef struct pcictrl512x {
- u32 esr;
- u32 ecdr;
- u32 eer;
- u32 eatcr;
- u32 eacr;
- u32 eeacr;
- u32 edlcr;
- u32 edhcr;
- u32 gcr;
- u32 ecr;
- u32 gsr;
- u8 res0[12];
- u32 pitar2;
- u8 res1[4];
- u32 pibar2;
- u32 piebar2;
- u32 piwar2;
- u8 res2[4];
- u32 pitar1;
- u8 res3[4];
- u32 pibar1;
- u32 piebar1;
- u32 piwar1;
- u8 res4[4];
- u32 pitar0;
- u8 res5[4];
- u32 pibar0;
- u8 res6[4];
- u32 piwar0;
- u8 res7[132];
-} pcictrl512x_t;
-
-
-/* PITAR - PCI Inbound Translation Address Register
- */
-#define PITAR_TA_MASK 0x000fffff
-
-/* PIBAR - PCI Inbound Base/Extended Address Register
- */
-#define PIBAR_MASK 0xffffffff
-#define PIEBAR_EBA_MASK 0x000fffff
-
-/* PIWAR - PCI Inbound Windows Attributes Register
- */
-#define PIWAR_EN 0x80000000
-#define PIWAR_SBS 0x40000000
-#define PIWAR_PF 0x20000000
-#define PIWAR_RTT_MASK 0x000f0000
-#define PIWAR_RTT_NO_SNOOP 0x00040000
-#define PIWAR_RTT_SNOOP 0x00050000
-#define PIWAR_WTT_MASK 0x0000f000
-#define PIWAR_WTT_NO_SNOOP 0x00004000
-#define PIWAR_WTT_SNOOP 0x00005000
-
-/*
- * MSCAN
- */
-typedef struct mscan512x {
- u8 fixme[0x100];
-} mscan512x_t;
-
-/*
- * BDLC
- */
-typedef struct bdlc512x {
- u8 fixme[0x100];
-} bdlc512x_t;
-
-/*
- * SDHC
- */
-typedef struct sdhc512x {
- u8 fixme[0x100];
-} sdhc512x_t;
-
-/*
- * SPDIF
- */
-typedef struct spdif512x {
- u8 fixme[0x100];
-} spdif512x_t;
-
-/*
- * I2C
- */
-typedef struct i2c512x_dev {
- volatile u32 madr; /* I2Cn + 0x00 */
- volatile u32 mfdr; /* I2Cn + 0x04 */
- volatile u32 mcr; /* I2Cn + 0x08 */
- volatile u32 msr; /* I2Cn + 0x0C */
- volatile u32 mdr; /* I2Cn + 0x10 */
- u8 res0[0x0C];
-} i2c512x_dev_t;
-
-/* Number of I2C buses */
-#define I2C_BUS_CNT 3
-
-typedef struct i2c512x {
- i2c512x_dev_t dev[I2C_BUS_CNT];
- volatile u32 icr;
- volatile u32 mifr;
- u8 res0[0x98];
-} i2c512x_t;
-
-/* I2Cn control register bits */
-#define I2C_EN 0x80
-#define I2C_IEN 0x40
-#define I2C_STA 0x20
-#define I2C_TX 0x10
-#define I2C_TXAK 0x08
-#define I2C_RSTA 0x04
-#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF 0x80
-#define I2C_AAS 0x40
-#define I2C_BB 0x20
-#define I2C_AL 0x10
-#define I2C_SRW 0x04
-#define I2C_IF 0x02
-#define I2C_RXAK 0x01
-
-/*
- * AXE
- */
-typedef struct axe512x {
- u8 fixme[0x100];
-} axe512x_t;
-
-/*
- * DIU
- */
-typedef struct diu512x {
- u8 fixme[0x100];
-} diu512x_t;
-
-/*
- * CFM
- */
-typedef struct cfm512x {
- u8 fixme[0x100];
-} cfm512x_t;
-
-/*
- * FEC
- */
-typedef struct fec512x {
- u32 fec_id; /* FEC_ID register */
- u32 ievent; /* Interrupt event register */
- u32 imask; /* Interrupt mask register */
- u32 reserved_01;
- u32 r_des_active; /* Receive ring updated flag */
- u32 x_des_active; /* Transmit ring updated flag */
- u32 reserved_02[3];
- u32 ecntrl; /* Ethernet control register */
- u32 reserved_03[6];
- u32 mii_data; /* MII data register */
- u32 mii_speed; /* MII speed register */
- u32 reserved_04[7];
- u32 mib_control; /* MIB control/status register */
- u32 reserved_05[7];
- u32 r_cntrl; /* Receive control register */
- u32 r_hash; /* Receive hash */
- u32 reserved_06[14];
- u32 x_cntrl; /* Transmit control register */
- u32 reserved_07[7];
- u32 paddr1; /* Physical address low */
- u32 paddr2; /* Physical address high + type field */
- u32 op_pause; /* Opcode + pause duration */
- u32 reserved_08[10];
- u32 iaddr1; /* Upper 32 bits of individual hash table */
- u32 iaddr2; /* Lower 32 bits of individual hash table */
- u32 gaddr1; /* Upper 32 bits of group hash table */
- u32 gaddr2; /* Lower 32 bits of group hash table */
- u32 reserved_09[7];
- u32 x_wmrk; /* Transmit FIFO watermark */
- u32 reserved_10;
- u32 r_bound; /* End of RAM */
- u32 r_fstart; /* Receive FIFO start address */
- u32 reserved_11[11];
- u32 r_des_start; /* Beginning of receive descriptor ring */
- u32 x_des_start; /* Pointer to beginning of transmit descriptor ring */
- u32 r_buff_size; /* Receive buffer size */
- u32 reserved_12[26];
- u32 dma_control; /* DMA control for IP bus, AMBA IF + DMA revision */
- u32 reserved_13[2];
-
- u32 mib[128]; /* MIB Block Counters */
-
- u32 fifo[256]; /* used by FEC, can only be accessed by DMA */
-} fec512x_t;
-
-/*
- * ULPI
- */
-typedef struct ulpi512x {
- u8 fixme[0x600];
-} ulpi512x_t;
-
-/*
- * UTMI
- */
-typedef struct utmi512x {
- u8 fixme[0x3000];
-} utmi512x_t;
-
-/*
- * PCI DMA
- */
-typedef struct pcidma512x {
- u8 fixme[0x300];
-} pcidma512x_t;
-
-/*
- * IO Control
- */
-typedef struct ioctrl512x {
- u32 io_control_mem; /* MEM pad ctrl reg */
- u32 io_control_gp; /* GP pad ctrl reg */
- u32 io_control_lpc_clk; /* LPC_CLK pad ctrl reg */
- u32 io_control_lpc_oe; /* LPC_OE pad ctrl reg */
- u32 io_control_lpc_rw; /* LPC_R/W pad ctrl reg */
- u32 io_control_lpc_ack; /* LPC_ACK pad ctrl reg */
- u32 io_control_lpc_cs0; /* LPC_CS0 pad ctrl reg */
- u32 io_control_nfc_ce0; /* NFC_CE0 pad ctrl reg */
- u32 io_control_lpc_cs1; /* LPC_CS1 pad ctrl reg */
- u32 io_control_lpc_cs2; /* LPC_CS2 pad ctrl reg */
- u32 io_control_lpc_ax03; /* LPC_AX03 pad ctrl reg */
- u32 io_control_emb_ax02; /* EMB_AX02 pad ctrl reg */
- u32 io_control_emb_ax01; /* EMB_AX01 pad ctrl reg */
- u32 io_control_emb_ax00; /* EMB_AX00 pad ctrl reg */
- u32 io_control_emb_ad31; /* EMB_AD31 pad ctrl reg */
- u32 io_control_emb_ad30; /* EMB_AD30 pad ctrl reg */
- u32 io_control_emb_ad29; /* EMB_AD29 pad ctrl reg */
- u32 io_control_emb_ad28; /* EMB_AD28 pad ctrl reg */
- u32 io_control_emb_ad27; /* EMB_AD27 pad ctrl reg */
- u32 io_control_emb_ad26; /* EMB_AD26 pad ctrl reg */
- u32 io_control_emb_ad25; /* EMB_AD25 pad ctrl reg */
- u32 io_control_emb_ad24; /* EMB_AD24 pad ctrl reg */
- u32 io_control_emb_ad23; /* EMB_AD23 pad ctrl reg */
- u32 io_control_emb_ad22; /* EMB_AD22 pad ctrl reg */
- u32 io_control_emb_ad21; /* EMB_AD21 pad ctrl reg */
- u32 io_control_emb_ad20; /* EMB_AD20 pad ctrl reg */
- u32 io_control_emb_ad19; /* EMB_AD19 pad ctrl reg */
- u32 io_control_emb_ad18; /* EMB_AD18 pad ctrl reg */
- u32 io_control_emb_ad17; /* EMB_AD17 pad ctrl reg */
- u32 io_control_emb_ad16; /* EMB_AD16 pad ctrl reg */
- u32 io_control_emb_ad15; /* EMB_AD15 pad ctrl reg */
- u32 io_control_emb_ad14; /* EMB_AD14 pad ctrl reg */
- u32 io_control_emb_ad13; /* EMB_AD13 pad ctrl reg */
- u32 io_control_emb_ad12; /* EMB_AD12 pad ctrl reg */
- u32 io_control_emb_ad11; /* EMB_AD11 pad ctrl reg */
- u32 io_control_emb_ad10; /* EMB_AD10 pad ctrl reg */
- u32 io_control_emb_ad09; /* EMB_AD09 pad ctrl reg */
- u32 io_control_emb_ad08; /* EMB_AD08 pad ctrl reg */
- u32 io_control_emb_ad07; /* EMB_AD07 pad ctrl reg */
- u32 io_control_emb_ad06; /* EMB_AD06 pad ctrl reg */
- u32 io_control_emb_ad05; /* EMB_AD05 pad ctrl reg */
- u32 io_control_emb_ad04; /* EMB_AD04 pad ctrl reg */
- u32 io_control_emb_ad03; /* EMB_AD03 pad ctrl reg */
- u32 io_control_emb_ad02; /* EMB_AD02 pad ctrl reg */
- u32 io_control_emb_ad01; /* EMB_AD01 pad ctrl reg */
- u32 io_control_emb_ad00; /* EMB_AD00 pad ctrl reg */
- u32 io_control_pata_ce1; /* PATA_CE1 pad ctrl reg */
- u32 io_control_pata_ce2; /* PATA_CE2 pad ctrl reg */
- u32 io_control_pata_isolate; /* PATA_ISOLATE pad ctrl reg */
- u32 io_control_pata_ior; /* PATA_IOR pad ctrl reg */
- u32 io_control_pata_iow; /* PATA_IOW pad ctrl reg */
- u32 io_control_pata_iochrdy; /* PATA_IOCHRDY pad ctrl reg */
- u32 io_control_pata_intrq; /* PATA_INTRQ pad ctrl reg */
- u32 io_control_pata_drq; /* PATA_DRQ pad ctrl reg */
- u32 io_control_pata_dack; /* PATA_DACK pad ctrl reg */
- u32 io_control_nfc_wp; /* NFC_WP pad ctrl reg */
- u32 io_control_nfc_rb; /* NFC_RB pad ctrl reg */
- u32 io_control_nfc_ale; /* NFC_ALE pad ctrl reg */
- u32 io_control_nfc_cle; /* NFC_CLE pad ctrl reg */
- u32 io_control_nfc_we; /* NFC_WE pad ctrl reg */
- u32 io_control_nfc_re; /* NFC_RE pad ctrl reg */
- u32 io_control_pci_ad31; /* PCI_AD31 pad ctrl reg */
- u32 io_control_pci_ad30; /* PCI_AD30 pad ctrl reg */
- u32 io_control_pci_ad29; /* PCI_AD29 pad ctrl reg */
- u32 io_control_pci_ad28; /* PCI_AD28 pad ctrl reg */
- u32 io_control_pci_ad27; /* PCI_AD27 pad ctrl reg */
- u32 io_control_pci_ad26; /* PCI_AD26 pad ctrl reg */
- u32 io_control_pci_ad25; /* PCI_AD25 pad ctrl reg */
- u32 io_control_pci_ad24; /* PCI_AD24 pad ctrl reg */
- u32 io_control_pci_ad23; /* PCI_AD23 pad ctrl reg */
- u32 io_control_pci_ad22; /* PCI_AD22 pad ctrl reg */
- u32 io_control_pci_ad21; /* PCI_AD21 pad ctrl reg */
- u32 io_control_pci_ad20; /* PCI_AD20 pad ctrl reg */
- u32 io_control_pci_ad19; /* PCI_AD19 pad ctrl reg */
- u32 io_control_pci_ad18; /* PCI_AD18 pad ctrl reg */
- u32 io_control_pci_ad17; /* PCI_AD17 pad ctrl reg */
- u32 io_control_pci_ad16; /* PCI_AD16 pad ctrl reg */
- u32 io_control_pci_ad15; /* PCI_AD15 pad ctrl reg */
- u32 io_control_pci_ad14; /* PCI_AD14 pad ctrl reg */
- u32 io_control_pci_ad13; /* PCI_AD13 pad ctrl reg */
- u32 io_control_pci_ad12; /* PCI_AD12 pad ctrl reg */
- u32 io_control_pci_ad11; /* PCI_AD11 pad ctrl reg */
- u32 io_control_pci_ad10; /* PCI_AD10 pad ctrl reg */
- u32 io_control_pci_ad09; /* PCI_AD09 pad ctrl reg */
- u32 io_control_pci_ad08; /* PCI_AD08 pad ctrl reg */
- u32 io_control_pci_ad07; /* PCI_AD07 pad ctrl reg */
- u32 io_control_pci_ad06; /* PCI_AD06 pad ctrl reg */
- u32 io_control_pci_ad05; /* PCI_AD05 pad ctrl reg */
- u32 io_control_pci_ad04; /* PCI_AD04 pad ctrl reg */
- u32 io_control_pci_ad03; /* PCI_AD03 pad ctrl reg */
- u32 io_control_pci_ad02; /* PCI_AD02 pad ctrl reg */
- u32 io_control_pci_ad01; /* PCI_AD01 pad ctrl reg */
- u32 io_control_pci_ad00; /* PCI_AD00 pad ctrl reg */
- u32 io_control_pci_cbe0; /* PCI_CBE0 pad ctrl reg */
- u32 io_control_pci_cbe1; /* PCI_CBE1 pad ctrl reg */
- u32 io_control_pci_cbe2; /* PCI_CBE2 pad ctrl reg */
- u32 io_control_pci_cbe3; /* PCI_CBE3 pad ctrl reg */
- u32 io_control_pci_grant2; /* PCI_GRANT2 pad ctrl reg */
- u32 io_control_pci_req2; /* PCI_REQ2 pad ctrl reg */
- u32 io_control_pci_grant1; /* PCI_GRANT1 pad ctrl reg */
- u32 io_control_pci_req1; /* PCI_REQ1 pad ctrl reg */
- u32 io_control_pci_grant0; /* PCI_GRANT0 pad ctrl reg */
- u32 io_control_pci_req0; /* PCI_REQ0 pad ctrl reg */
- u32 io_control_pci_inta; /* PCI_INTA pad ctrl reg */
- u32 io_control_pci_clk; /* PCI_CLK pad ctrl reg */
- u32 io_control_pci_rst; /* PCI_RST- pad ctrl reg */
- u32 io_control_pci_frame; /* PCI_FRAME pad ctrl reg */
- u32 io_control_pci_idsel; /* PCI_IDSEL pad ctrl reg */
- u32 io_control_pci_devsel; /* PCI_DEVSEL pad ctrl reg */
- u32 io_control_pci_irdy; /* PCI_IRDY pad ctrl reg */
- u32 io_control_pci_trdy; /* PCI_TRDY pad ctrl reg */
- u32 io_control_pci_stop; /* PCI_STOP pad ctrl reg */
- u32 io_control_pci_par; /* PCI_PAR pad ctrl reg */
- u32 io_control_pci_perr; /* PCI_PERR pad ctrl reg */
- u32 io_control_pci_serr; /* PCI_SERR pad ctrl reg */
- u32 io_control_spdif_txclk; /* SPDIF_TXCLK pad ctrl reg */
- u32 io_control_spdif_tx; /* SPDIF_TX pad ctrl reg */
- u32 io_control_spdif_rx; /* SPDIF_RX pad ctrl reg */
- u32 io_control_i2c0_scl; /* I2C0_SCL pad ctrl reg */
- u32 io_control_i2c0_sda; /* I2C0_SDA pad ctrl reg */
- u32 io_control_i2c1_scl; /* I2C1_SCL pad ctrl reg */
- u32 io_control_i2c1_sda; /* I2C1_SDA pad ctrl reg */
- u32 io_control_i2c2_scl; /* I2C2_SCL pad ctrl reg */
- u32 io_control_i2c2_sda; /* I2C2_SDA pad ctrl reg */
- u32 io_control_irq0; /* IRQ0 pad ctrl reg */
- u32 io_control_irq1; /* IRQ1 pad ctrl reg */
- u32 io_control_can1_tx; /* CAN1_TX pad ctrl reg */
- u32 io_control_can2_tx; /* CAN2_TX pad ctrl reg */
- u32 io_control_j1850_tx; /* J1850_TX pad ctrl reg */
- u32 io_control_j1850_rx; /* J1850_RX pad ctrl reg */
- u32 io_control_psc_mclk_in; /* PSC_MCLK_IN pad ctrl reg */
- u32 io_control_psc0_0; /* PSC0_0 pad ctrl reg */
- u32 io_control_psc0_1; /* PSC0_1 pad ctrl reg */
- u32 io_control_psc0_2; /* PSC0_2 pad ctrl reg */
- u32 io_control_psc0_3; /* PSC0_3 pad ctrl reg */
- u32 io_control_psc0_4; /* PSC0_4 pad ctrl reg */
- u32 io_control_psc1_0; /* PSC1_0 pad ctrl reg */
- u32 io_control_psc1_1; /* PSC1_1 pad ctrl reg */
- u32 io_control_psc1_2; /* PSC1_2 pad ctrl reg */
- u32 io_control_psc1_3; /* PSC1_3 pad ctrl reg */
- u32 io_control_psc1_4; /* PSC1_4 pad ctrl reg */
- u32 io_control_psc2_0; /* PSC2_0 pad ctrl reg */
- u32 io_control_psc2_1; /* PSC2_1 pad ctrl reg */
- u32 io_control_psc2_2; /* PSC2_2 pad ctrl reg */
- u32 io_control_psc2_3; /* PSC2_3 pad ctrl reg */
- u32 io_control_psc2_4; /* PSC2_4 pad ctrl reg */
- u32 io_control_psc3_0; /* PSC3_0 pad ctrl reg */
- u32 io_control_psc3_1; /* PSC3_1 pad ctrl reg */
- u32 io_control_psc3_2; /* PSC3_2 pad ctrl reg */
- u32 io_control_psc3_3; /* PSC3_3 pad ctrl reg */
- u32 io_control_psc3_4; /* PSC3_4 pad ctrl reg */
- u32 io_control_psc4_0; /* PSC4_0 pad ctrl reg */
- u32 io_control_psc4_1; /* PSC4_1 pad ctrl reg */
- u32 io_control_psc4_2; /* PSC4_2 pad ctrl reg */
- u32 io_control_psc4_3; /* PSC4_3 pad ctrl reg */
- u32 io_control_psc4_4; /* PSC4_4 pad ctrl reg */
- u32 io_control_psc5_0; /* PSC5_0 pad ctrl reg */
- u32 io_control_psc5_1; /* PSC5_1 pad ctrl reg */
- u32 io_control_psc5_2; /* PSC5_2 pad ctrl reg */
- u32 io_control_psc5_3; /* PSC5_3 pad ctrl reg */
- u32 io_control_psc5_4; /* PSC5_4 pad ctrl reg */
- u32 io_control_psc6_0; /* PSC6_0 pad ctrl reg */
- u32 io_control_psc6_1; /* PSC6_1 pad ctrl reg */
- u32 io_control_psc6_2; /* PSC6_2 pad ctrl reg */
- u32 io_control_psc6_3; /* PSC6_3 pad ctrl reg */
- u32 io_control_psc6_4; /* PSC6_4 pad ctrl reg */
- u32 io_control_psc7_0; /* PSC7_0 pad ctrl reg */
- u32 io_control_psc7_1; /* PSC7_1 pad ctrl reg */
- u32 io_control_psc7_2; /* PSC7_2 pad ctrl reg */
- u32 io_control_psc7_3; /* PSC7_3 pad ctrl reg */
- u32 io_control_psc7_4; /* PSC7_4 pad ctrl reg */
- u32 io_control_psc8_0; /* PSC8_0 pad ctrl reg */
- u32 io_control_psc8_1; /* PSC8_1 pad ctrl reg */
- u32 io_control_psc8_2; /* PSC8_2 pad ctrl reg */
- u32 io_control_psc8_3; /* PSC8_3 pad ctrl reg */
- u32 io_control_psc8_4; /* PSC8_4 pad ctrl reg */
- u32 io_control_psc9_0; /* PSC9_0 pad ctrl reg */
- u32 io_control_psc9_1; /* PSC9_1 pad ctrl reg */
- u32 io_control_psc9_2; /* PSC9_2 pad ctrl reg */
- u32 io_control_psc9_3; /* PSC9_3 pad ctrl reg */
- u32 io_control_psc9_4; /* PSC9_4 pad ctrl reg */
- u32 io_control_psc10_0; /* PSC10_0 pad ctrl reg */
- u32 io_control_psc10_1; /* PSC10_1 pad ctrl reg */
- u32 io_control_psc10_2; /* PSC10_2 pad ctrl reg */
- u32 io_control_psc10_3; /* PSC10_3 pad ctrl reg */
- u32 io_control_psc10_4; /* PSC10_4 pad ctrl reg */
- u32 io_control_psc11_0; /* PSC11_0 pad ctrl reg */
- u32 io_control_psc11_1; /* PSC11_1 pad ctrl reg */
- u32 io_control_psc11_2; /* PSC11_2 pad ctrl reg */
- u32 io_control_psc11_3; /* PSC11_3 pad ctrl reg */
- u32 io_control_psc11_4; /* PSC11_4 pad ctrl reg */
- u32 io_control_ckstp_out; /* CKSTP_OUT pad ctrl reg */
- u32 io_control_usb_phy_drvvbus; /* USB2_DRVVBUS pad ctrl reg */
- u8 reserved[0x0cfc]; /* fill to 4096 bytes size */
-} ioctrl512x_t;
-
-/* Indexes in regs array */
-/* Set for DDR */
-#define IOCTRL_MUX_DDR 0x00000036
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
-#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
-#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
-#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
-#define IO_PIN_DS(v) ((v)) /* slew rate */
-
-typedef struct iopin_t {
- int p_offset; /* offset from IOCTL_MEM_OFFSET */
- int nr_pins; /* number of pins to set this way */
- int bit_or; /* or in the value instead of overwrite */
- u_long val; /* value to write or or */
-}iopin_t;
-
-void iopin_initialize(iopin_t *,int);
-
-/*
- * IIM
- */
-typedef struct iim512x {
- u32 stat; /* IIM status register */
- u32 statm; /* IIM status IRQ mask */
- u32 err; /* IIM errors register */
- u32 emask; /* IIM error IRQ mask */
- u32 fctl; /* IIM fuse control register */
- u32 ua; /* IIM upper address register */
- u32 la; /* IIM lower address register */
- u32 sdat; /* IIM explicit sense data */
- u8 res0[0x08];
- u32 prg_p; /* IIM program protection register */
- u8 res1[0x10];
- u32 divide; /* IIM divide factor register */
- u8 res2[0x7c0];
- u32 fbac0; /* IIM fuse bank 0 prot (for Freescale use) */
- u32 fb0w0[0x1f]; /* IIM fuse bank 0 data (for Freescale use) */
- u8 res3[0x380];
- u32 fbac1; /* IIM fuse bank 1 protection */
- u32 fb1w1[0x01f]; /* IIM fuse bank 1 data */
- u8 res4[0x380];
-} iim512x_t;
-
-/*
- * LPC
- */
-typedef struct lpc512x {
- u32 cs_cfg[8]; /* Chip Select N Configuration Registers
- No dedicated entry for CS Boot as == CS0 */
- u32 cs_cr; /* Chip Select Control Register */
- u32 cs_sr; /* Chip Select Status Register */
- u32 cs_bcr; /* Chip Select Burst Control Register */
- u32 cs_dccr; /* Chip Select Deadcycle Control Register */
- u32 cs_hccr; /* Chip Select Holdcycle Control Register */
- u32 altr; /* Address Latch Timing Register */
- u8 res0[0xc8];
- u32 sclpc_psr; /* SCLPC Packet Size Register */
- u32 sclpc_sar; /* SCLPC Start Address Register */
- u32 sclpc_cr; /* SCLPC Control Register */
- u32 sclpc_er; /* SCLPC Enable Register */
- u32 sclpc_nar; /* SCLPC NextAddress Register */
- u32 sclpc_sr; /* SCLPC Status Register */
- u32 sclpc_bdr; /* SCLPC Bytes Done Register */
- u32 emb_scr; /* EMB Share Counter Register */
- u32 emb_pcr; /* EMB Pause Control Register */
- u8 res1[0x1c];
- u32 lpc_fdwr; /* LPC RX/TX FIFO Data Word Register */
- u32 lpc_fsr; /* LPC RX/TX FIFO Status Register */
- u32 lpc_cr; /* LPC RX/TX FIFO Control Register */
- u32 lpc_ar; /* LPC RX/TX FIFO Alarm Register */
- u8 res2[0xb0];
-} lpc512x_t;
-
-/*
- * PATA
- */
-typedef struct pata512x {
- /* LOCAL Registers */
- u32 pata_time1; /* Time register 1: PIO and tx timing parameter */
- u32 pata_time2; /* Time register 2: PIO timing parameter */
- u32 pata_time3; /* Time register 3: PIO and MDMA timing parameter */
- u32 pata_time4; /* Time register 4: MDMA and UDMA timing parameter */
- u32 pata_time5; /* Time register 5: UDMA timing parameter */
- u32 pata_time6; /* Time register 6: UDMA timing parameter */
- u32 pata_fifo_data32; /* 32bit wide dataport to/from FIFO */
- u32 pata_fifo_data16; /* 16bit wide dataport to/from FIFO */
- u32 pata_fifo_fill; /* FIFO filling in halfwords (READONLY)*/
- u32 pata_ata_control; /* ATA Interface control register */
- u32 pata_irq_pending; /* Interrupt pending register (READONLY) */
- u32 pata_irq_enable; /* Interrupt enable register */
- u32 pata_irq_clear; /* Interrupt clear register (WRITEONLY)*/
- u32 pata_fifo_alarm; /* fifo alarm threshold */
- u32 res1[0x1A];
- /* DRIVE Registers */
- u32 pata_drive_data; /* drive data register*/
- u32 pata_drive_features;/* drive features register */
- u32 pata_drive_sectcnt; /* drive sector count register */
- u32 pata_drive_sectnum; /* drive sector number register */
- u32 pata_drive_cyllow; /* drive cylinder low register */
- u32 pata_drive_cylhigh; /* drive cylinder high register */
- u32 pata_drive_dev_head;/* drive device head register */
- u32 pata_drive_command; /* write = drive command, read = drive status reg */
- u32 res2[0x06];
- u32 pata_drive_alt_stat;/* write = drive control, read = drive alt status reg */
- u32 res3[0x09];
-} pata512x_t;
-
-/*
- * PSC
- */
-typedef struct psc512x {
- volatile u8 mode; /* PSC + 0x00 */
- volatile u8 res0[3];
- union { /* PSC + 0x04 */
- volatile u16 status;
- volatile u16 clock_select;
- } sr_csr;
-#define psc_status sr_csr.status
-#define psc_clock_select sr_csr.clock_select
- volatile u16 res1;
- volatile u8 command; /* PSC + 0x08 */
- volatile u8 res2[3];
- union { /* PSC + 0x0c */
- volatile u8 buffer_8;
- volatile u16 buffer_16;
- volatile u32 buffer_32;
- } buffer;
-#define psc_buffer_8 buffer.buffer_8
-#define psc_buffer_16 buffer.buffer_16
-#define psc_buffer_32 buffer.buffer_32
- union { /* PSC + 0x10 */
- volatile u8 ipcr;
- volatile u8 acr;
- } ipcr_acr;
-#define psc_ipcr ipcr_acr.ipcr
-#define psc_acr ipcr_acr.acr
- volatile u8 res3[3];
- union { /* PSC + 0x14 */
- volatile u16 isr;
- volatile u16 imr;
- } isr_imr;
-#define psc_isr isr_imr.isr
-#define psc_imr isr_imr.imr
- volatile u16 res4;
- volatile u8 ctur; /* PSC + 0x18 */
- volatile u8 res5[3];
- volatile u8 ctlr; /* PSC + 0x1c */
- volatile u8 res6[3];
- volatile u32 ccr; /* PSC + 0x20 */
- volatile u8 res7[12];
- volatile u8 ivr; /* PSC + 0x30 */
- volatile u8 res8[3];
- volatile u8 ip; /* PSC + 0x34 */
- volatile u8 res9[3];
- volatile u8 op1; /* PSC + 0x38 */
- volatile u8 res10[3];
- volatile u8 op0; /* PSC + 0x3c */
- volatile u8 res11[3];
- volatile u32 sicr; /* PSC + 0x40 */
- volatile u8 res12[60];
- volatile u32 tfcmd; /* PSC + 0x80 */
- volatile u32 tfalarm; /* PSC + 0x84 */
- volatile u32 tfstat; /* PSC + 0x88 */
- volatile u32 tfintstat; /* PSC + 0x8C */
- volatile u32 tfintmask; /* PSC + 0x90 */
- volatile u32 tfcount; /* PSC + 0x94 */
- volatile u16 tfwptr; /* PSC + 0x98 */
- volatile u16 tfrptr; /* PSC + 0x9A */
- volatile u32 tfsize; /* PSC + 0x9C */
- volatile u8 res13[28];
- union { /* PSC + 0xBC */
- volatile u8 buffer_8;
- volatile u16 buffer_16;
- volatile u32 buffer_32;
- } tfdata_buffer;
-#define tfdata_8 tfdata_buffer.buffer_8
-#define tfdata_16 tfdata_buffer.buffer_16
-#define tfdata_32 tfdata_buffer.buffer_32
-
- volatile u32 rfcmd; /* PSC + 0xC0 */
- volatile u32 rfalarm; /* PSC + 0xC4 */
- volatile u32 rfstat; /* PSC + 0xC8 */
- volatile u32 rfintstat; /* PSC + 0xCC */
- volatile u32 rfintmask; /* PSC + 0xD0 */
- volatile u32 rfcount; /* PSC + 0xD4 */
- volatile u16 rfwptr; /* PSC + 0xD8 */
- volatile u16 rfrptr; /* PSC + 0xDA */
- volatile u32 rfsize; /* PSC + 0xDC */
- volatile u8 res18[28];
- union { /* PSC + 0xFC */
- volatile u8 buffer_8;
- volatile u16 buffer_16;
- volatile u32 buffer_32;
- } rfdata_buffer;
-#define rfdata_8 rfdata_buffer.buffer_8
-#define rfdata_16 rfdata_buffer.buffer_16
-#define rfdata_32 rfdata_buffer.buffer_32
-} psc512x_t;
-
-/* PSC FIFO Command values */
-#define PSC_FIFO_RESET_SLICE 0x80
-#define PSC_FIFO_ENABLE_SLICE 0x01
-
-/* PSC FIFO Controller Command values */
-#define FIFOC_ENABLE_CLOCK_GATE 0x01
-#define FIFOC_DISABLE_CLOCK_GATE 0x00
-
-/* PSC FIFO status */
-#define PSC_FIFO_EMPTY 0x01
-
-/* PSC Command values */
-#define PSC_RX_ENABLE 0x01
-#define PSC_RX_DISABLE 0x02
-#define PSC_TX_ENABLE 0x04
-#define PSC_TX_DISABLE 0x08
-#define PSC_SEL_MODE_REG_1 0x10
-#define PSC_RST_RX 0x20
-#define PSC_RST_TX 0x30
-#define PSC_RST_ERR_STAT 0x40
-#define PSC_RST_BRK_CHG_INT 0x50
-#define PSC_START_BRK 0x60
-#define PSC_STOP_BRK 0x70
-
-/* PSC status register bits */
-#define PSC_SR_CDE 0x0080
-#define PSC_SR_TXEMP 0x0800
-#define PSC_SR_OE 0x1000
-#define PSC_SR_PE 0x2000
-#define PSC_SR_FE 0x4000
-#define PSC_SR_RB 0x8000
-
-/* PSC mode fields */
-#define PSC_MODE_5_BITS 0x00
-#define PSC_MODE_6_BITS 0x01
-#define PSC_MODE_7_BITS 0x02
-#define PSC_MODE_8_BITS 0x03
-#define PSC_MODE_PAREVEN 0x00
-#define PSC_MODE_PARODD 0x04
-#define PSC_MODE_PARFORCE 0x08
-#define PSC_MODE_PARNONE 0x10
-#define PSC_MODE_ENTIMEOUT 0x20
-#define PSC_MODE_RXRTS 0x80
-#define PSC_MODE_1_STOPBIT 0x07
-
-/*
- * FIFOC
- */
-typedef struct fifoc512x {
- u32 fifoc_cmd;
- u32 fifoc_int;
- u32 fifoc_dma;
- u32 fifoc_axe;
- u32 fifoc_debug;
- u8 fixme[0xEC];
-} fifoc512x_t;
-
-/*
- * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
- *
- * NOTE: individual PSC units are free to use whatever area (and size) of the
- * FIFOC internal memory, so make sure memory areas for FIFO slices used by
- * different PSCs do not overlap!
- *
- * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
- * tests indicate that it is 1024 words total.
- */
-#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */
-#define FIFOC_PSC0_TX_ADDR 0x0
-#define FIFOC_PSC0_RX_SIZE 0x0
-#define FIFOC_PSC0_RX_ADDR 0x0
-
-#define FIFOC_PSC1_TX_SIZE 0x0
-#define FIFOC_PSC1_TX_ADDR 0x0
-#define FIFOC_PSC1_RX_SIZE 0x0
-#define FIFOC_PSC1_RX_ADDR 0x0
-
-#define FIFOC_PSC2_TX_SIZE 0x0
-#define FIFOC_PSC2_TX_ADDR 0x0
-#define FIFOC_PSC2_RX_SIZE 0x0
-#define FIFOC_PSC2_RX_ADDR 0x0
-
-#define FIFOC_PSC3_TX_SIZE 0x04
-#define FIFOC_PSC3_TX_ADDR 0x0
-#define FIFOC_PSC3_RX_SIZE 0x04
-#define FIFOC_PSC3_RX_ADDR 0x10
-
-#define FIFOC_PSC4_TX_SIZE 0x0
-#define FIFOC_PSC4_TX_ADDR 0x0
-#define FIFOC_PSC4_RX_SIZE 0x0
-#define FIFOC_PSC4_RX_ADDR 0x0
-
-#define FIFOC_PSC5_TX_SIZE 0x0
-#define FIFOC_PSC5_TX_ADDR 0x0
-#define FIFOC_PSC5_RX_SIZE 0x0
-#define FIFOC_PSC5_RX_ADDR 0x0
-
-#define FIFOC_PSC6_TX_SIZE 0x0
-#define FIFOC_PSC6_TX_ADDR 0x0
-#define FIFOC_PSC6_RX_SIZE 0x0
-#define FIFOC_PSC6_RX_ADDR 0x0
-
-#define FIFOC_PSC7_TX_SIZE 0x0
-#define FIFOC_PSC7_TX_ADDR 0x0
-#define FIFOC_PSC7_RX_SIZE 0x0
-#define FIFOC_PSC7_RX_ADDR 0x0
-
-#define FIFOC_PSC8_TX_SIZE 0x0
-#define FIFOC_PSC8_TX_ADDR 0x0
-#define FIFOC_PSC8_RX_SIZE 0x0
-#define FIFOC_PSC8_RX_ADDR 0x0
-
-#define FIFOC_PSC9_TX_SIZE 0x0
-#define FIFOC_PSC9_TX_ADDR 0x0
-#define FIFOC_PSC9_RX_SIZE 0x0
-#define FIFOC_PSC9_RX_ADDR 0x0
-
-#define FIFOC_PSC10_TX_SIZE 0x0
-#define FIFOC_PSC10_TX_ADDR 0x0
-#define FIFOC_PSC10_RX_SIZE 0x0
-#define FIFOC_PSC10_RX_ADDR 0x0
-
-#define FIFOC_PSC11_TX_SIZE 0x0
-#define FIFOC_PSC11_TX_ADDR 0x0
-#define FIFOC_PSC11_RX_SIZE 0x0
-#define FIFOC_PSC11_RX_ADDR 0x0
-
-/*
- * SATA
- */
-typedef struct sata512x {
- u8 fixme[0x2000];
-} sata512x_t;
-
-typedef struct immap {
- sysconf512x_t sysconf; /* System configuration */
- u8 res0[0x700];
- wdt512x_t wdt; /* Watch Dog Timer (WDT) */
- rtclk512x_t rtc; /* Real Time Clock Module */
- gpt512x_t gpt; /* General Purpose Timer */
- ipic512x_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter512x_t arbiter; /* CSB Arbiter */
- reset512x_t reset; /* Reset Module */
- clk512x_t clk; /* Clock Module */
- pmc512x_t pmc; /* Power Management Control Module */
- gpio512x_t gpio; /* General purpose I/O module */
- u8 res1[0x100];
- mscan512x_t mscan; /* MSCAN */
- bdlc512x_t bdlc; /* BDLC */
- sdhc512x_t sdhc; /* SDHC */
- spdif512x_t spdif; /* SPDIF */
- i2c512x_t i2c; /* I2C Controllers */
- u8 res2[0x800];
- axe512x_t axe; /* AXE */
- diu512x_t diu; /* Display Interface Unit */
- cfm512x_t cfm; /* Clock Frequency Measurement */
- u8 res3[0x500];
- fec512x_t fec; /* Fast Ethernet Controller */
- ulpi512x_t ulpi; /* USB ULPI */
- u8 res4[0xa00];
- utmi512x_t utmi; /* USB UTMI */
- u8 res5[0x1000];
- pcidma512x_t pci_dma; /* PCI DMA */
- pciconf512x_t pci_conf; /* PCI Configuration */
- u8 res6[0x80];
- ios512x_t ios; /* PCI Sequencer */
- pcictrl512x_t pci_ctrl; /* PCI Controller Control and Status */
- u8 res7[0xa00];
- ddr512x_t mddrc; /* Multi-port DDR Memory Controller */
- ioctrl512x_t io_ctrl; /* IO Control */
- iim512x_t iim; /* IC Identification module */
- u8 res8[0x4000];
- lpc512x_t lpc; /* LocalPlus Controller */
- pata512x_t pata; /* Parallel ATA */
- u8 res9[0xd00];
- psc512x_t psc[12]; /* PSCs */
- u8 res10[0x300];
- fifoc512x_t fifoc; /* FIFO Controller */
- u8 res11[0x2000];
- dma512x_t dma; /* DMA */
- u8 res12[0xa800];
- sata512x_t sata; /* Serial ATA */
- u8 res13[0xde000];
-} immap_t;
-
-/* provide interface to get PATA base address */
-static inline u32 get_pata_base (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- return (u32)(&im->pata);
-}
-#endif /* __ASSEMBLY__ */
-
-#endif /* __IMMAP_512x__ */
+++ /dev/null
-/*
- * MPC8220 Internal Memory Map
- * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * The Internal Memory Map of the 8220.
- *
- */
-#ifndef __IMMAP_MPC8220__
-#define __IMMAP_MPC8220__
-
-/*
- * System configuration registers.
- */
-typedef struct sys_conf {
- u16 mbar; /* 0x00 */
- u16 res1;
-
- u16 res2; /* 0x04 */
- u16 sdramds;
-
- u32 res3[6]; /* 0x08 */
-
- u32 cscfg[6]; /* 0x20 */
-
- u32 res4[2]; /* 0x38 */
-
- u8 res5[3]; /* 0x40 */
- u8 rstctrl;
-
- u8 res6[3]; /* 0x44 */
- u8 rststat;
-
- u32 res7[2]; /* 0x48 */
-
- u32 jtagid; /* 0x50 */
-} sysconf8220_t;
-
-
-/*
- * Memory controller registers.
- */
-typedef struct mem_ctlr {
- ushort mode; /* 0x100 */
- ushort res1;
- u32 ctrl; /* 0x104 */
- u32 cfg1; /* 0x108 */
- u32 cfg2; /* 0x10c */
-} memctl8220_t;
-
-/*
- * XLB Arbitration registers
- */
-typedef struct xlb_arb
-{
- uint res1[16]; /* 0x200 */
- uint config; /* 0x240 */
- uint version; /* 0x244 */
- uint status; /* 0x248 */
- uint intEnable; /* 0x24c */
- uint addrCap; /* 0x250 */
- uint busSigCap; /* 0x254 */
- uint addrTenTimeOut; /* 0x258 */
- uint dataTenTimeOut; /* 0x25c */
- uint busActTimeOut; /* 0x260 */
- uint mastPriEn; /* 0x264 */
- uint mastPriority; /* 0x268 */
- uint baseAddr; /* 0x26c */
-} xlbarb8220_t;
-
-/*
- * Flexbus registers
- */
-typedef struct flexbus
-{
- ushort csar0; /* 0x00 */
- ushort res1;
- uint csmr0; /* 0x04 */
- uint cscr0; /* 0x08 */
-
- ushort csar1; /* 0x0c */
- ushort res2;
- uint csmr1; /* 0x10 */
- uint cscr1; /* 0x14 */
-
- ushort csar2; /* 0x18 */
- ushort res3;
- uint csmr2; /* 0x1c */
- uint cscr2; /* 0x20 */
-
- ushort csar3; /* 0x24 */
- ushort res4;
- uint csmr3; /* 0x28 */
- uint cscr3; /* 0x2c */
-
- ushort csar4; /* 0x30 */
- ushort res5;
- uint csmr4; /* 0x34 */
- uint cscr4; /* 0x38 */
-
- ushort csar5; /* 0x3c */
- ushort res6;
- uint csmr5; /* 0x40 */
- uint cscr5; /* 0x44 */
-} flexbus8220_t;
-
-/*
- * GPIO registers
- */
-typedef struct gpio
-{
- u32 out; /* 0x00 */
- u32 obs; /* 0x04 */
- u32 obc; /* 0x08 */
- u32 obt; /* 0x0c */
- u32 en; /* 0x10 */
- u32 ebs; /* 0x14 */
- u32 ebc; /* 0x18 */
- u32 ebt; /* 0x1c */
- u32 mc; /* 0x20 */
- u32 st; /* 0x24 */
- u32 intr; /* 0x28 */
-} gpio8220_t;
-
-/*
- * General Purpose Timer registers
- */
-typedef struct gptimer
-{
- u8 OCPW;
- u8 OctIct;
- u8 Control;
- u8 Mode;
-
- u16 Prescl; /* Prescale */
- u16 Count; /* Count */
-
- u16 PwmWid; /* PWM Width */
- u8 PwmOp; /* Output Polarity */
- u8 PwmLd; /* Immediate Update */
-
- u16 Capture; /* Capture internal counter */
- u8 OvfPin; /* Ovf and Pin */
- u8 Int; /* Interrupts */
-} gptmr8220_t;
-
-/*
- * PSC registers
- */
-typedef struct psc
-{
- u32 mr1_2; /* 0x00 Mode reg 1 & 2 */
- u32 sr_csr; /* 0x04 Status/Clock Select reg */
- u32 cr; /* 0x08 Command reg */
- u8 xmitbuf[4]; /* 0x0c Receive/Transmit Buffer */
- u32 ipcr_acr; /* 0x10 Input Port Change/Auxiliary Control reg */
- u32 isr_imr; /* 0x14 Interrupt Status/Mask reg */
- u32 ctur; /* 0x18 Counter Timer Upper reg */
- u32 ctlr; /* 0x1c Counter Timer Lower reg */
- u32 rsvd1[4]; /* 0x20 ... 0x2c */
- u32 ivr; /* 0x30 Interrupt Vector reg */
- u32 ipr; /* 0x34 Input Port reg */
- u32 opsetr; /* 0x38 Output Port Set reg */
- u32 opresetr; /* 0x3c Output Port Reset reg */
- u32 sicr; /* 0x40 PSC/IrDA control reg */
- u32 ircr1; /* 0x44 IrDA control reg 1*/
- u32 ircr2; /* 0x48 IrDA control reg 2*/
- u32 irsdr; /* 0x4c IrDA SIR Divide reg */
- u32 irmdr; /* 0x50 IrDA MIR Divide reg */
- u32 irfdr; /* 0x54 PSC IrDA FIR Divide reg */
- u32 rfnum; /* 0x58 RX-FIFO counter */
- u32 txnum; /* 0x5c TX-FIFO counter */
- u32 rfdata; /* 0x60 RX-FIFO data */
- u32 rfstat; /* 0x64 RX-FIFO status */
- u32 rfcntl; /* 0x68 RX-FIFO control */
- u32 rfalarm; /* 0x6c RX-FIFO alarm */
- u32 rfrptr; /* 0x70 RX-FIFO read pointer */
- u32 rfwptr; /* 0x74 RX-FIFO write pointer */
- u32 rflfrptr; /* 0x78 RX-FIFO last read frame pointer */
- u32 rflfwptr; /* 0x7c RX-FIFO last write frame pointer */
-
- u32 tfdata; /* 0x80 TX-FIFO data */
- u32 tfstat; /* 0x84 TX-FIFO status */
- u32 tfcntl; /* 0x88 TX-FIFO control */
- u32 tfalarm; /* 0x8c TX-FIFO alarm */
- u32 tfrptr; /* 0x90 TX-FIFO read pointer */
- u32 tfwptr; /* 0x94 TX-FIFO write pointer */
- u32 tflfrptr; /* 0x98 TX-FIFO last read frame pointer */
- u32 tflfwptr; /* 0x9c TX-FIFO last write frame pointer */
-} psc8220_t;
-
-/*
- * Interrupt Controller registers
- */
-typedef struct interrupt_controller {
-} intctl8220_t;
-
-
-/* Fast controllers
-*/
-
-/*
- * I2C registers
- */
-typedef struct i2c
-{
- u8 adr; /* 0x00 */
- u8 res1[3];
- u8 fdr; /* 0x04 */
- u8 res2[3];
- u8 cr; /* 0x08 */
- u8 res3[3];
- u8 sr; /* 0x0C */
- u8 res4[3];
- u8 dr; /* 0x10 */
- u8 res5[3];
- u32 reserved0; /* 0x14 */
- u32 reserved1; /* 0x18 */
- u32 reserved2; /* 0x1c */
- u8 icr; /* 0x20 */
- u8 res6[3];
-} i2c8220_t;
-
-/*
- * Port Configuration Registers
- */
-typedef struct pcfg
-{
- uint pcfg0; /* 0x00 */
- uint pcfg1; /* 0x04 */
- uint pcfg2; /* 0x08 */
- uint pcfg3; /* 0x0c */
-} pcfg8220_t;
-
-/* ...and the whole thing wrapped up....
-*/
-typedef struct immap {
- sysconf8220_t im_sysconf; /* System Configuration */
- memctl8220_t im_memctl; /* Memory Controller */
- xlbarb8220_t im_xlbarb; /* XLB Arbitration */
- psc8220_t im_psc; /* PSC controller */
- flexbus8220_t im_fb; /* FlexBus Controller */
- i2c8220_t im_i2c; /* I2C control/status */
- pcfg8220_t im_pcfg; /* Port configuration */
-} immap_t;
-
-#endif /* __IMMAP_MPC8220__ */
+++ /dev/null
-/*
- * MPC8260 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * The Internal Memory Map of the 8260. I don't know how generic
- * this will be, as I don't have any knowledge of the subsequent
- * parts at this time. I copied this from the 8xx_immap.h.
- */
-#ifndef __IMMAP_82XX__
-#define __IMMAP_82XX__
-
-/* System configuration registers.
-*/
-typedef struct sys_conf {
- uint sc_siumcr;
- uint sc_sypcr;
- char res1[6];
- ushort sc_swsr;
- char res2[20];
- uint sc_bcr;
- u_char sc_ppc_acr;
- char res3[3];
- uint sc_ppc_alrh;
- uint sc_ppc_alrl;
- u_char sc_lcl_acr;
- char res4[3];
- uint sc_lcl_alrh;
- uint sc_lcl_alrl;
- uint sc_tescr1;
- uint sc_tescr2;
- uint sc_ltescr1;
- uint sc_ltescr2;
- uint sc_pdtea;
- u_char sc_pdtem;
- char res5[3];
- uint sc_ldtea;
- u_char sc_ldtem;
- char res6[163];
-} sysconf8260_t;
-
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- uint memc_br0;
- uint memc_or0;
- uint memc_br1;
- uint memc_or1;
- uint memc_br2;
- uint memc_or2;
- uint memc_br3;
- uint memc_or3;
- uint memc_br4;
- uint memc_or4;
- uint memc_br5;
- uint memc_or5;
- uint memc_br6;
- uint memc_or6;
- uint memc_br7;
- uint memc_or7;
- uint memc_br8;
- uint memc_or8;
- uint memc_br9;
- uint memc_or9;
- uint memc_br10;
- uint memc_or10;
- uint memc_br11;
- uint memc_or11;
- char res1[8];
- uint memc_mar;
- char res2[4];
- uint memc_mamr;
- uint memc_mbmr;
- uint memc_mcmr;
- char res3[8];
- ushort memc_mptpr;
- char res4[2];
- uint memc_mdr;
- char res5[4];
- uint memc_psdmr;
- uint memc_lsdmr;
- u_char memc_purt;
- char res6[3];
- u_char memc_psrt;
- char res7[3];
- u_char memc_lurt;
- char res8[3];
- u_char memc_lsrt;
- char res9[3];
- uint memc_immr;
- uint memc_pcibr0;
- uint memc_pcibr1;
- char res10[16];
- uint memc_pcimsk0;
- uint memc_pcimsk1;
- char res11[52];
-} memctl8260_t;
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- char res1[32];
- ushort sit_tmcntsc;
- char res2[2];
- uint sit_tmcnt;
- char res3[4];
- uint sit_tmcntal;
- char res4[16];
- ushort sit_piscr;
- char res5[2];
- uint sit_pitc;
- uint sit_pitr;
- char res6[94];
- char res7[390];
-} sit8260_t;
-
-/* PCI
- */
-typedef struct pci_config {
- uint pci_omisr;
- uint pci_ominr;
- char res1[8];
- uint pci_ifqpr;
- uint pci_ofqpr;
- char res2[8];
- uint pci_imr0;
- uint pci_imr1;
- uint pci_omr0;
- uint pci_omr1;
- uint pci_odr;
- char res3[4];
- uint pci_idr;
- char res4[20];
- uint pci_imisr;
- uint pci_imimr;
- char res5[24];
- uint pci_ifhpr;
- char res5_2[4];
- uint pci_iftpr;
- char res6[4];
- uint pci_iphpr;
- char res6_2[4];
- uint pci_iptpr;
- char res7[4];
- uint pci_ofhpr;
- char res7_2[4];
- uint pci_oftpr;
- char res8[4];
- uint pci_ophpr;
- char res8_2[4];
- uint pci_optpr;
- char res9[8];
- uint pci_mucr;
- char res10[8];
- uint pci_qbar;
- char res11[12];
- uint pci_dmamr0;
- uint pci_dmasr0;
- uint pci_dmacdar0;
- char res12[4];
- uint pci_dmasar0;
- char res13[4];
- uint pci_dmadar0;
- char res14[4];
- uint pci_dmabcr0;
- uint pci_dmandar0;
- char res15[88];
- uint pci_dmamr1;
- uint pci_dmasr1;
- uint pci_dmacdar1;
- char res16[4];
- uint pci_dmasar1;
- char res17[4];
- uint pci_dmadar1;
- char res18[4];
- uint pci_dmabcr1;
- uint pci_dmandar1;
- char res19[88];
- uint pci_dmamr2;
- uint pci_dmasr2;
- uint pci_dmacdar2;
- char res20[4];
- uint pci_dmasar2;
- char res21[4];
- uint pci_dmadar2;
- char res22[4];
- uint pci_dmabcr2;
- uint pci_dmandar2;
- char res23[88];
- uint pci_dmamr3;
- uint pci_dmasr3;
- uint pci_dmacdar3;
- char res24[4];
- uint pci_dmasar3;
- char res25[4];
- uint pci_dmadar3;
- char res26[4];
- uint pci_dmabcr3;
- uint pci_dmandar3;
- char res27[344];
- uint pci_potar0;
- char res28[4];
- uint pci_pobar0;
- char res29[4];
- uint pci_pocmr0;
- char res30[4];
- uint pci_potar1;
- char res31[4];
- uint pci_pobar1;
- char res32[4];
- uint pci_pocmr1;
- char res33[4];
- uint pci_potar2;
- char res34[4];
- uint pci_pobar2;
- char res35[4];
- uint pci_pocmr2;
- char res36[52];
- uint pci_ptcr;
- uint pci_gpcr;
- uint pci_gcr;
- uint pci_esr;
- uint pci_emr;
- uint pci_ecr;
- uint pci_eacr;
- char res37[4];
- uint pci_edcr;
- char res38[4];
- uint pci_eccr;
- char res39[44];
- uint pci_pitar1;
- char res40[4];
- uint pci_pibar1;
- char res41[4];
- uint pci_picmr1;
- char res42[4];
- uint pci_pitar0;
- char res43[4];
- uint pci_pibar0;
- char res44[4];
- uint pci_picmr0;
- char res45[4];
- uint pci_cfg_addr;
- uint pci_cfg_data;
- uint pci_int_ack;
- char res46[756];
-}pci8260_t;
-#define PISCR_PIRQ_MASK ((ushort)0xff00)
-#define PISCR_PS ((ushort)0x0080)
-#define PISCR_PIE ((ushort)0x0004)
-#define PISCR_PTF ((ushort)0x0002)
-#define PISCR_PTE ((ushort)0x0001)
-
-/* Interrupt Controller.
-*/
-typedef struct interrupt_controller {
- ushort ic_sicr;
- char res1[2];
- uint ic_sivec;
- uint ic_sipnrh;
- uint ic_sipnrl;
- uint ic_siprr;
- uint ic_scprrh;
- uint ic_scprrl;
- uint ic_simrh;
- uint ic_simrl;
- uint ic_siexr;
- char res2[88];
-} intctl8260_t;
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- uint car_sccr;
- char res1[4];
- uint car_scmr;
- char res2[4];
- uint car_rsr;
- uint car_rmr;
- char res[104];
-} car8260_t;
-
-/* Input/Output Port control/status registers.
- * Names consistent with processor manual, although they are different
- * from the original 8xx names.......
- */
-typedef struct io_port {
- uint iop_pdira;
- uint iop_ppara;
- uint iop_psora;
- uint iop_podra;
- uint iop_pdata;
- char res1[12];
- uint iop_pdirb;
- uint iop_pparb;
- uint iop_psorb;
- uint iop_podrb;
- uint iop_pdatb;
- char res2[12];
- uint iop_pdirc;
- uint iop_pparc;
- uint iop_psorc;
- uint iop_podrc;
- uint iop_pdatc;
- char res3[12];
- uint iop_pdird;
- uint iop_ppard;
- uint iop_psord;
- uint iop_podrd;
- uint iop_pdatd;
- char res4[12];
-} iop8260_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- u_char cpmt_tgcr1;
- char res1[3];
- u_char cpmt_tgcr2;
- char res2[11];
- ushort cpmt_tmr1;
- ushort cpmt_tmr2;
- ushort cpmt_trr1;
- ushort cpmt_trr2;
- ushort cpmt_tcr1;
- ushort cpmt_tcr2;
- ushort cpmt_tcn1;
- ushort cpmt_tcn2;
- ushort cpmt_tmr3;
- ushort cpmt_tmr4;
- ushort cpmt_trr3;
- ushort cpmt_trr4;
- ushort cpmt_tcr3;
- ushort cpmt_tcr4;
- ushort cpmt_tcn3;
- ushort cpmt_tcn4;
- ushort cpmt_ter1;
- ushort cpmt_ter2;
- ushort cpmt_ter3;
- ushort cpmt_ter4;
- char res3[584];
-} cpmtimer8260_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- char res0[24];
- u_char sdma_sdsr;
- char res1[3];
- u_char sdma_sdmr;
- char res2[3];
- u_char sdma_idsr1;
- char res3[3];
- u_char sdma_idmr1;
- char res4[3];
- u_char sdma_idsr2;
- char res5[3];
- u_char sdma_idmr2;
- char res6[3];
- u_char sdma_idsr3;
- char res7[3];
- u_char sdma_idmr3;
- char res8[3];
- u_char sdma_idsr4;
- char res9[3];
- u_char sdma_idmr4;
- char res10[707];
-} sdma8260_t;
-
-/* Fast controllers
-*/
-typedef struct fcc {
- uint fcc_gfmr;
- uint fcc_fpsmr;
- ushort fcc_ftodr;
- char res1[2];
- ushort fcc_fdsr;
- char res2[2];
- ushort fcc_fcce;
- char res3[2];
- ushort fcc_fccm;
- char res4[2];
- u_char fcc_fccs;
- char res5[3];
- u_char fcc_ftirr_phy[4];
-} fcc_t;
-
-/* Fast controllers continued
- */
-typedef struct fcc_c {
- uint fcc_firper;
- uint fcc_firer;
- uint fcc_firsr_hi;
- uint fcc_firsr_lo;
- u_char fcc_gfemr;
- char res1[15];
-} fcc_c_t;
-
-/* TC Layer
- */
-typedef struct tclayer {
- ushort tc_tcmode;
- ushort tc_cdsmr;
- ushort tc_tcer;
- ushort tc_rcc;
- ushort tc_tcmr;
- ushort tc_fcc;
- ushort tc_ccc;
- ushort tc_icc;
- ushort tc_tcc;
- ushort tc_ecc;
- char res1[12];
-} tclayer_t;
-
-/* I2C
-*/
-typedef struct i2c {
- u_char i2c_i2mod;
- char res1[3];
- u_char i2c_i2add;
- char res2[3];
- u_char i2c_i2brg;
- char res3[3];
- u_char i2c_i2com;
- char res4[3];
- u_char i2c_i2cer;
- char res5[3];
- u_char i2c_i2cmr;
- char res6[331];
-} i2c8260_t;
-
-typedef struct scc { /* Serial communication channels */
- uint scc_gsmrl;
- uint scc_gsmrh;
- ushort scc_psmr;
- char res1[2];
- ushort scc_todr;
- ushort scc_dsr;
- ushort scc_scce;
- char res2[2];
- ushort scc_sccm;
- char res3;
- u_char scc_sccs;
- char res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- char res1[2];
- ushort smc_smcmr;
- char res2[2];
- u_char smc_smce;
- char res3[3];
- u_char smc_smcm;
- char res4[5];
-} smc_t;
-
-/* Serial Peripheral Interface.
-*/
-typedef struct im_spi {
- ushort spi_spmode;
- char res1[4];
- u_char spi_spie;
- char res2[3];
- u_char spi_spim;
- char res3[2];
- u_char spi_spcom;
- char res4[82];
-} im_spi_t;
-
-/* CPM Mux.
-*/
-typedef struct cpmux {
- u_char cmx_si1cr;
- char res1;
- u_char cmx_si2cr;
- char res2;
- uint cmx_fcr;
- uint cmx_scr;
- u_char cmx_smr;
- char res3;
- ushort cmx_uar;
- char res4[16];
-} cpmux_t;
-
-/* SIRAM control
-*/
-typedef struct siram {
- ushort si_amr;
- ushort si_bmr;
- ushort si_cmr;
- ushort si_dmr;
- u_char si_gmr;
- char res1;
- u_char si_cmdr;
- char res2;
- u_char si_str;
- char res3;
- ushort si_rsr;
-} siramctl_t;
-
-typedef struct mcc {
- ushort mcc_mcce;
- char res1[2];
- ushort mcc_mccm;
- char res2[2];
- u_char mcc_mccf;
- char res3[7];
-} mcc_t;
-
-typedef struct comm_proc {
- uint cp_cpcr;
- uint cp_rccr;
- char res1[14];
- ushort cp_rter;
- char res2[2];
- ushort cp_rtmr;
- ushort cp_rtscr;
- char res3[2];
- uint cp_rtsr;
- char res4[12];
-} cpm8260_t;
-
-/* ...and the whole thing wrapped up....
-*/
-typedef struct immap {
- /* Some references are into the unique and known dpram spaces,
- * others are from the generic base.
- */
-#define im_dprambase im_dpram1
- u_char im_dpram1[16*1024];
- char res1[16*1024];
- u_char im_dpram2[4*1024];
- char res2[8*1024];
- u_char im_dpram3[4*1024];
- char res3[16*1024];
-
- sysconf8260_t im_siu_conf; /* SIU Configuration */
- memctl8260_t im_memctl; /* Memory Controller */
- sit8260_t im_sit; /* System Integration Timers */
- pci8260_t im_pci; /* PCI Configuration */
- intctl8260_t im_intctl; /* Interrupt Controller */
- car8260_t im_clkrst; /* Clocks and reset */
- iop8260_t im_ioport; /* IO Port control/status */
- cpmtimer8260_t im_cpmtimer; /* CPM timers */
- sdma8260_t im_sdma; /* SDMA control/status */
-
- fcc_t im_fcc[3]; /* Three FCCs */
-
- char res4[32];
- fcc_c_t im_fcc_c[3]; /* Continued FCCs */
- char res4a[32];
-
- tclayer_t im_tclayer[8]; /* Eight TCLayers */
- ushort tc_tcgsr;
- ushort tc_tcger;
-
- /* First set of baud rate generators.
- */
- char res4b[236];
- uint im_brgc5;
- uint im_brgc6;
- uint im_brgc7;
- uint im_brgc8;
-
- char res5[608];
-
- i2c8260_t im_i2c; /* I2C control/status */
- cpm8260_t im_cpm; /* Communication processor */
-
- /* Second set of baud rate generators.
- */
- uint im_brgc1;
- uint im_brgc2;
- uint im_brgc3;
- uint im_brgc4;
-
- scc_t im_scc[4]; /* Four SCCs */
- smc_t im_smc[2]; /* Couple of SMCs */
- im_spi_t im_spi; /* A SPI */
- cpmux_t im_cpmux; /* CPM clock route mux */
- siramctl_t im_siramctl1; /* First SI RAM Control */
- mcc_t im_mcc1; /* First MCC */
- siramctl_t im_siramctl2; /* Second SI RAM Control */
- mcc_t im_mcc2; /* Second MCC */
-
- char res6[1184];
-
- ushort im_si1txram[256];
- char res7[512];
- ushort im_si1rxram[256];
- char res8[512];
- ushort im_si2txram[256];
- char res9[512];
- ushort im_si2rxram[256];
- char res10[512];
- char res11[4096];
-} immap_t;
-
-#endif /* __IMMAP_82XX__ */
+++ /dev/null
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc.
- *
- * MPC83xx Internal Memory Map
- *
- * Contributors:
- * Dave Liu <daveliu@freescale.com>
- * Tanya Jiang <tanya.jiang@freescale.com>
- * Mandy Lavi <mandy.lavi@freescale.com>
- * Eran Liberty <liberty@freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#ifndef __IMMAP_83xx__
-#define __IMMAP_83xx__
-
-#include <asm/types.h>
-#include <asm/fsl_i2c.h>
-#include <asm/mpc8xxx_spi.h>
-#include <asm/fsl_lbc.h>
-#include <asm/fsl_dma.h>
-
-/*
- * Local Access Window
- */
-typedef struct law83xx {
- u32 bar; /* LBIU local access window base address register */
- u32 ar; /* LBIU local access window attribute register */
-} law83xx_t;
-
-/*
- * System configuration registers
- */
-typedef struct sysconf83xx {
- u32 immrbar; /* Internal memory map base address register */
- u8 res0[0x04];
- u32 altcbar; /* Alternate configuration base address register */
- u8 res1[0x14];
- law83xx_t lblaw[4]; /* LBIU local access window */
- u8 res2[0x20];
- law83xx_t pcilaw[2]; /* PCI local access window */
- u8 res3[0x10];
- law83xx_t pcielaw[2]; /* PCI Express local access window */
- u8 res4[0x10];
- law83xx_t ddrlaw[2]; /* DDR local access window */
- u8 res5[0x50];
- u32 sgprl; /* System General Purpose Register Low */
- u32 sgprh; /* System General Purpose Register High */
- u32 spridr; /* System Part and Revision ID Register */
- u8 res6[0x04];
- u32 spcr; /* System Priority Configuration Register */
- u32 sicrl; /* System I/O Configuration Register Low */
- u32 sicrh; /* System I/O Configuration Register High */
- u8 res7[0x04];
- u32 sidcr0; /* System I/O Delay Configuration Register 0 */
- u32 sidcr1; /* System I/O Delay Configuration Register 1 */
- u32 ddrcdr; /* DDR Control Driver Register */
- u32 ddrdsr; /* DDR Debug Status Register */
- u32 obir; /* Output Buffer Impedance Register */
- u8 res8[0xC];
- u32 pecr1; /* PCI Express control register 1 */
- u32 pecr2; /* PCI Express control register 2 */
- u8 res9[0xB8];
-} sysconf83xx_t;
-
-/*
- * Watch Dog Timer (WDT) Registers
- */
-typedef struct wdt83xx {
- u8 res0[4];
- u32 swcrr; /* System watchdog control register */
- u32 swcnr; /* System watchdog count register */
- u8 res1[2];
- u16 swsrr; /* System watchdog service register */
- u8 res2[0xF0];
-} wdt83xx_t;
-
-/*
- * RTC/PIT Module Registers
- */
-typedef struct rtclk83xx {
- u32 cnr; /* control register */
- u32 ldr; /* load register */
- u32 psr; /* prescale register */
- u32 ctr; /* counter value field register */
- u32 evr; /* event register */
- u32 alr; /* alarm register */
- u8 res0[0xE8];
-} rtclk83xx_t;
-
-/*
- * Global timer module
- */
-typedef struct gtm83xx {
- u8 cfr1; /* Timer1/2 Configuration */
- u8 res0[3];
- u8 cfr2; /* Timer3/4 Configuration */
- u8 res1[10];
- u16 mdr1; /* Timer1 Mode Register */
- u16 mdr2; /* Timer2 Mode Register */
- u16 rfr1; /* Timer1 Reference Register */
- u16 rfr2; /* Timer2 Reference Register */
- u16 cpr1; /* Timer1 Capture Register */
- u16 cpr2; /* Timer2 Capture Register */
- u16 cnr1; /* Timer1 Counter Register */
- u16 cnr2; /* Timer2 Counter Register */
- u16 mdr3; /* Timer3 Mode Register */
- u16 mdr4; /* Timer4 Mode Register */
- u16 rfr3; /* Timer3 Reference Register */
- u16 rfr4; /* Timer4 Reference Register */
- u16 cpr3; /* Timer3 Capture Register */
- u16 cpr4; /* Timer4 Capture Register */
- u16 cnr3; /* Timer3 Counter Register */
- u16 cnr4; /* Timer4 Counter Register */
- u16 evr1; /* Timer1 Event Register */
- u16 evr2; /* Timer2 Event Register */
- u16 evr3; /* Timer3 Event Register */
- u16 evr4; /* Timer4 Event Register */
- u16 psr1; /* Timer1 Prescaler Register */
- u16 psr2; /* Timer2 Prescaler Register */
- u16 psr3; /* Timer3 Prescaler Register */
- u16 psr4; /* Timer4 Prescaler Register */
- u8 res[0xC0];
-} gtm83xx_t;
-
-/*
- * Integrated Programmable Interrupt Controller
- */
-typedef struct ipic83xx {
- u32 sicfr; /* System Global Interrupt Configuration Register */
- u32 sivcr; /* System Global Interrupt Vector Register */
- u32 sipnr_h; /* System Internal Interrupt Pending Register - High */
- u32 sipnr_l; /* System Internal Interrupt Pending Register - Low */
- u32 siprr_a; /* System Internal Interrupt Group A Priority Register */
- u8 res0[8];
- u32 siprr_d; /* System Internal Interrupt Group D Priority Register */
- u32 simsr_h; /* System Internal Interrupt Mask Register - High */
- u32 simsr_l; /* System Internal Interrupt Mask Register - Low */
- u8 res1[4];
- u32 sepnr; /* System External Interrupt Pending Register */
- u32 smprr_a; /* System Mixed Interrupt Group A Priority Register */
- u32 smprr_b; /* System Mixed Interrupt Group B Priority Register */
- u32 semsr; /* System External Interrupt Mask Register */
- u32 secnr; /* System External Interrupt Control Register */
- u32 sersr; /* System Error Status Register */
- u32 sermr; /* System Error Mask Register */
- u32 sercr; /* System Error Control Register */
- u8 res2[4];
- u32 sifcr_h; /* System Internal Interrupt Force Register - High */
- u32 sifcr_l; /* System Internal Interrupt Force Register - Low */
- u32 sefcr; /* System External Interrupt Force Register */
- u32 serfr; /* System Error Force Register */
- u32 scvcr; /* System Critical Interrupt Vector Register */
- u32 smvcr; /* System Management Interrupt Vector Register */
- u8 res3[0x98];
-} ipic83xx_t;
-
-/*
- * System Arbiter Registers
- */
-typedef struct arbiter83xx {
- u32 acr; /* Arbiter Configuration Register */
- u32 atr; /* Arbiter Timers Register */
- u8 res[4];
- u32 aer; /* Arbiter Event Register */
- u32 aidr; /* Arbiter Interrupt Definition Register */
- u32 amr; /* Arbiter Mask Register */
- u32 aeatr; /* Arbiter Event Attributes Register */
- u32 aeadr; /* Arbiter Event Address Register */
- u32 aerr; /* Arbiter Event Response Register */
- u8 res1[0xDC];
-} arbiter83xx_t;
-
-/*
- * Reset Module
- */
-typedef struct reset83xx {
- u32 rcwl; /* Reset Configuration Word Low Register */
- u32 rcwh; /* Reset Configuration Word High Register */
- u8 res0[8];
- u32 rsr; /* Reset Status Register */
- u32 rmr; /* Reset Mode Register */
- u32 rpr; /* Reset protection Register */
- u32 rcr; /* Reset Control Register */
- u32 rcer; /* Reset Control Enable Register */
- u8 res1[0xDC];
-} reset83xx_t;
-
-/*
- * Clock Module
- */
-typedef struct clk83xx {
- u32 spmr; /* system PLL mode Register */
- u32 occr; /* output clock control Register */
- u32 sccr; /* system clock control Register */
- u8 res0[0xF4];
-} clk83xx_t;
-
-/*
- * Power Management Control Module
- */
-typedef struct pmc83xx {
- u32 pmccr; /* PMC Configuration Register */
- u32 pmcer; /* PMC Event Register */
- u32 pmcmr; /* PMC Mask Register */
- u32 pmccr1; /* PMC Configuration Register 1 */
- u32 pmccr2; /* PMC Configuration Register 2 */
- u8 res0[0xEC];
-} pmc83xx_t;
-
-/*
- * General purpose I/O module
- */
-typedef struct gpio83xx {
- u32 dir; /* direction register */
- u32 odr; /* open drain register */
- u32 dat; /* data register */
- u32 ier; /* interrupt event register */
- u32 imr; /* interrupt mask register */
- u32 icr; /* external interrupt control register */
- u8 res0[0xE8];
-} gpio83xx_t;
-
-/*
- * QE Ports Interrupts Registers
- */
-typedef struct qepi83xx {
- u8 res0[0xC];
- u32 qepier; /* QE Ports Interrupt Event Register */
- u32 qepimr; /* QE Ports Interrupt Mask Register */
- u32 qepicr; /* QE Ports Interrupt Control Register */
- u8 res1[0xE8];
-} qepi83xx_t;
-
-/*
- * QE Parallel I/O Ports
- */
-typedef struct gpio_n {
- u32 podr; /* Open Drain Register */
- u32 pdat; /* Data Register */
- u32 dir1; /* direction register 1 */
- u32 dir2; /* direction register 2 */
- u32 ppar1; /* Pin Assignment Register 1 */
- u32 ppar2; /* Pin Assignment Register 2 */
-} gpio_n_t;
-
-typedef struct qegpio83xx {
- gpio_n_t ioport[0x7];
- u8 res0[0x358];
-} qepio83xx_t;
-
-/*
- * QE Secondary Bus Access Windows
- */
-typedef struct qesba83xx {
- u32 lbmcsar; /* Local bus memory controller start address */
- u32 sdmcsar; /* Secondary DDR memory controller start address */
- u8 res0[0x38];
- u32 lbmcear; /* Local bus memory controller end address */
- u32 sdmcear; /* Secondary DDR memory controller end address */
- u8 res1[0x38];
- u32 lbmcar; /* Local bus memory controller attributes */
- u32 sdmcar; /* Secondary DDR memory controller attributes */
- u8 res2[0x378];
-} qesba83xx_t;
-
-/*
- * DDR Memory Controller Memory Map
- */
-typedef struct ddr_cs_bnds {
- u32 csbnds;
- u8 res0[4];
-} ddr_cs_bnds_t;
-
-typedef struct ddr83xx {
- ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */
- u8 res0[0x60];
- u32 cs_config[4]; /* Chip Select x Configuration */
- u8 res1[0x70];
- u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
- u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
- u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
- u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
- u32 sdram_cfg; /* SDRAM Control Configuration */
- u32 sdram_cfg2; /* SDRAM Control Configuration 2 */
- u32 sdram_mode; /* SDRAM Mode Configuration */
- u32 sdram_mode2; /* SDRAM Mode Configuration 2 */
- u32 sdram_md_cntl; /* SDRAM Mode Control */
- u32 sdram_interval; /* SDRAM Interval Configuration */
- u32 ddr_data_init; /* SDRAM Data Initialization */
- u8 res2[4];
- u32 sdram_clk_cntl; /* SDRAM Clock Control */
- u8 res3[0x14];
- u32 ddr_init_addr; /* DDR training initialization address */
- u32 ddr_init_ext_addr; /* DDR training initialization extended address */
- u8 res4[0xAA8];
- u32 ddr_ip_rev1; /* DDR IP block revision 1 */
- u32 ddr_ip_rev2; /* DDR IP block revision 2 */
- u8 res5[0x200];
- u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */
- u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */
- u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */
- u8 res6[0x14];
- u32 capture_data_hi; /* Memory Data Path Read Capture High */
- u32 capture_data_lo; /* Memory Data Path Read Capture Low */
- u32 capture_ecc; /* Memory Data Path Read Capture ECC */
- u8 res7[0x14];
- u32 err_detect; /* Memory Error Detect */
- u32 err_disable; /* Memory Error Disable */
- u32 err_int_en; /* Memory Error Interrupt Enable */
- u32 capture_attributes; /* Memory Error Attributes Capture */
- u32 capture_address; /* Memory Error Address Capture */
- u32 capture_ext_address;/* Memory Error Extended Address Capture */
- u32 err_sbe; /* Memory Single-Bit ECC Error Management */
- u8 res8[0xA4];
- u32 debug_reg;
- u8 res9[0xFC];
-} ddr83xx_t;
-
-/*
- * DUART
- */
-typedef struct duart83xx {
- u8 urbr_ulcr_udlb; /* combined register for URBR, UTHR and UDLB */
- u8 uier_udmb; /* combined register for UIER and UDMB */
- u8 uiir_ufcr_uafr; /* combined register for UIIR, UFCR and UAFR */
- u8 ulcr; /* line control register */
- u8 umcr; /* MODEM control register */
- u8 ulsr; /* line status register */
- u8 umsr; /* MODEM status register */
- u8 uscr; /* scratch register */
- u8 res0[8];
- u8 udsr; /* DMA status register */
- u8 res1[3];
- u8 res2[0xEC];
-} duart83xx_t;
-
-/*
- * DMA/Messaging Unit
- */
-typedef struct dma83xx {
- u32 res0[0xC]; /* 0x0-0x29 reseverd */
- u32 omisr; /* 0x30 Outbound message interrupt status register */
- u32 omimr; /* 0x34 Outbound message interrupt mask register */
- u32 res1[0x6]; /* 0x38-0x49 reserved */
- u32 imr0; /* 0x50 Inbound message register 0 */
- u32 imr1; /* 0x54 Inbound message register 1 */
- u32 omr0; /* 0x58 Outbound message register 0 */
- u32 omr1; /* 0x5C Outbound message register 1 */
- u32 odr; /* 0x60 Outbound doorbell register */
- u32 res2; /* 0x64-0x67 reserved */
- u32 idr; /* 0x68 Inbound doorbell register */
- u32 res3[0x5]; /* 0x6C-0x79 reserved */
- u32 imisr; /* 0x80 Inbound message interrupt status register */
- u32 imimr; /* 0x84 Inbound message interrupt mask register */
- u32 res4[0x1E]; /* 0x88-0x99 reserved */
- struct fsl_dma dma[4];
-} dma83xx_t;
-
-/*
- * PCI Software Configuration Registers
- */
-typedef struct pciconf83xx {
- u32 config_address;
- u32 config_data;
- u32 int_ack;
- u8 res[116];
-} pciconf83xx_t;
-
-/*
- * PCI Outbound Translation Register
- */
-typedef struct pci_outbound_window {
- u32 potar;
- u8 res0[4];
- u32 pobar;
- u8 res1[4];
- u32 pocmr;
- u8 res2[4];
-} pot83xx_t;
-
-/*
- * Sequencer
- */
-typedef struct ios83xx {
- pot83xx_t pot[6];
- u8 res0[0x60];
- u32 pmcr;
- u8 res1[4];
- u32 dtcr;
- u8 res2[4];
-} ios83xx_t;
-
-/*
- * PCI Controller Control and Status Registers
- */
-typedef struct pcictrl83xx {
- u32 esr;
- u32 ecdr;
- u32 eer;
- u32 eatcr;
- u32 eacr;
- u32 eeacr;
- u32 edlcr;
- u32 edhcr;
- u32 gcr;
- u32 ecr;
- u32 gsr;
- u8 res0[12];
- u32 pitar2;
- u8 res1[4];
- u32 pibar2;
- u32 piebar2;
- u32 piwar2;
- u8 res2[4];
- u32 pitar1;
- u8 res3[4];
- u32 pibar1;
- u32 piebar1;
- u32 piwar1;
- u8 res4[4];
- u32 pitar0;
- u8 res5[4];
- u32 pibar0;
- u8 res6[4];
- u32 piwar0;
- u8 res7[132];
-} pcictrl83xx_t;
-
-/*
- * USB
- */
-typedef struct usb83xx {
- u8 fixme[0x1000];
-} usb83xx_t;
-
-/*
- * TSEC
- */
-typedef struct tsec83xx {
- u8 fixme[0x1000];
-} tsec83xx_t;
-
-/*
- * Security
- */
-typedef struct security83xx {
- u8 fixme[0x10000];
-} security83xx_t;
-
-/*
- * PCI Express
- */
-struct pex_inbound_window {
- u32 ar;
- u32 tar;
- u32 barl;
- u32 barh;
-};
-
-struct pex_outbound_window {
- u32 ar;
- u32 bar;
- u32 tarl;
- u32 tarh;
-};
-
-struct pex_csb_bridge {
- u32 pex_csb_ver;
- u32 pex_csb_cab;
- u32 pex_csb_ctrl;
- u8 res0[8];
- u32 pex_dms_dstmr;
- u8 res1[4];
- u32 pex_cbs_stat;
- u8 res2[0x20];
- u32 pex_csb_obctrl;
- u32 pex_csb_obstat;
- u8 res3[0x98];
- u32 pex_csb_ibctrl;
- u32 pex_csb_ibstat;
- u8 res4[0xb8];
- u32 pex_wdma_ctrl;
- u32 pex_wdma_addr;
- u32 pex_wdma_stat;
- u8 res5[0x94];
- u32 pex_rdma_ctrl;
- u32 pex_rdma_addr;
- u32 pex_rdma_stat;
- u8 res6[0xd4];
- u32 pex_ombcr;
- u32 pex_ombdr;
- u8 res7[0x38];
- u32 pex_imbcr;
- u32 pex_imbdr;
- u8 res8[0x38];
- u32 pex_int_enb;
- u32 pex_int_stat;
- u32 pex_int_apio_vec1;
- u32 pex_int_apio_vec2;
- u8 res9[0x10];
- u32 pex_int_ppio_vec1;
- u32 pex_int_ppio_vec2;
- u32 pex_int_wdma_vec1;
- u32 pex_int_wdma_vec2;
- u32 pex_int_rdma_vec1;
- u32 pex_int_rdma_vec2;
- u32 pex_int_misc_vec;
- u8 res10[4];
- u32 pex_int_axi_pio_enb;
- u32 pex_int_axi_wdma_enb;
- u32 pex_int_axi_rdma_enb;
- u32 pex_int_axi_misc_enb;
- u32 pex_int_axi_pio_stat;
- u32 pex_int_axi_wdma_stat;
- u32 pex_int_axi_rdma_stat;
- u32 pex_int_axi_misc_stat;
- u8 res11[0xa0];
- struct pex_outbound_window pex_outbound_win[4];
- u8 res12[0x100];
- u32 pex_epiwtar0;
- u32 pex_epiwtar1;
- u32 pex_epiwtar2;
- u32 pex_epiwtar3;
- u8 res13[0x70];
- struct pex_inbound_window pex_inbound_win[4];
-};
-
-typedef struct pex83xx {
- u8 pex_cfg_header[0x404];
- u32 pex_ltssm_stat;
- u8 res0[0x30];
- u32 pex_ack_replay_timeout;
- u8 res1[4];
- u32 pex_gclk_ratio;
- u8 res2[0xc];
- u32 pex_pm_timer;
- u32 pex_pme_timeout;
- u8 res3[4];
- u32 pex_aspm_req_timer;
- u8 res4[0x18];
- u32 pex_ssvid_update;
- u8 res5[0x34];
- u32 pex_cfg_ready;
- u8 res6[0x24];
- u32 pex_bar_sizel;
- u8 res7[4];
- u32 pex_bar_sel;
- u8 res8[0x20];
- u32 pex_bar_pf;
- u8 res9[0x88];
- u32 pex_pme_to_ack_tor;
- u8 res10[0xc];
- u32 pex_ss_intr_mask;
- u8 res11[0x25c];
- struct pex_csb_bridge bridge;
- u8 res12[0x160];
-} pex83xx_t;
-
-/*
- * SATA
- */
-typedef struct sata83xx {
- u8 fixme[0x1000];
-} sata83xx_t;
-
-/*
- * eSDHC
- */
-typedef struct sdhc83xx {
- u8 fixme[0x1000];
-} sdhc83xx_t;
-
-/*
- * SerDes
- */
-typedef struct serdes83xx {
- u8 fixme[0x100];
-} serdes83xx_t;
-
-/*
- * On Chip ROM
- */
-typedef struct rom83xx {
- u8 mem[0x10000];
-} rom83xx_t;
-
-/*
- * TDM
- */
-typedef struct tdm83xx {
- u8 fixme[0x200];
-} tdm83xx_t;
-
-/*
- * TDM DMAC
- */
-typedef struct tdmdmac83xx {
- u8 fixme[0x2000];
-} tdmdmac83xx_t;
-
-#if defined(CONFIG_MPC834x)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- gpio83xx_t gpio[2]; /* General purpose I/O module */
- u8 res0[0x200];
- u8 dll_ddr[0x100];
- u8 dll_lbc[0x100];
- u8 res1[0xE00];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res2[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res3[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res4[0x1000];
- spi8xxx_t spi; /* Serial Peripheral Interface */
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */
- ios83xx_t ios; /* Sequencer */
- pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
- u8 res5[0x19900];
- usb83xx_t usb[2];
- tsec83xx_t tsec[2];
- u8 res6[0xA000];
- security83xx_t security;
- u8 res7[0xC0000];
-} immap_t;
-
-#ifdef CONFIG_HAS_FSL_MPH_USB
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x22000 /* use the MPH controller */
-#else
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 /* use the DR controller */
-#endif
-
-#elif defined(CONFIG_MPC8313)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- gpio83xx_t gpio[1]; /* General purpose I/O module */
- u8 res0[0x1300];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res1[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res2[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res3[0x1000];
- spi8xxx_t spi; /* Serial Peripheral Interface */
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res4[0x80];
- ios83xx_t ios; /* Sequencer */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res5[0x1aa00];
- usb83xx_t usb[1];
- tsec83xx_t tsec[2];
- u8 res6[0xA000];
- security83xx_t security;
- u8 res7[0xC0000];
-} immap_t;
-
-#elif defined(CONFIG_MPC8315)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- gpio83xx_t gpio[1]; /* General purpose I/O module */
- u8 res0[0x1300];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res1[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res2[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res3[0x1000];
- spi8xxx_t spi; /* Serial Peripheral Interface */
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res4[0x80];
- ios83xx_t ios; /* Sequencer */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res5[0xa00];
- pex83xx_t pciexp[2]; /* PCI Express Controller */
- u8 res6[0xb000];
- tdm83xx_t tdm; /* TDM Controller */
- u8 res7[0x1e00];
- sata83xx_t sata[2]; /* SATA Controller */
- u8 res8[0x9000];
- usb83xx_t usb[1]; /* USB DR Controller */
- tsec83xx_t tsec[2];
- u8 res9[0x6000];
- tdmdmac83xx_t tdmdmac; /* TDM DMAC */
- u8 res10[0x2000];
- security83xx_t security;
- u8 res11[0xA3000];
- serdes83xx_t serdes[1]; /* SerDes Registers */
- u8 res12[0x1CF00];
-} immap_t;
-
-#elif defined(CONFIG_MPC837x)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- gpio83xx_t gpio[2]; /* General purpose I/O module */
- u8 res0[0x1200];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res1[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res2[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res3[0x1000];
- spi8xxx_t spi; /* Serial Peripheral Interface */
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res4[0x80];
- ios83xx_t ios; /* Sequencer */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res5[0xa00];
- pex83xx_t pciexp[2]; /* PCI Express Controller */
- u8 res6[0xd000];
- sata83xx_t sata[4]; /* SATA Controller */
- u8 res7[0x7000];
- usb83xx_t usb[1]; /* USB DR Controller */
- tsec83xx_t tsec[2];
- u8 res8[0x8000];
- sdhc83xx_t sdhc; /* SDHC Controller */
- u8 res9[0x1000];
- security83xx_t security;
- u8 res10[0xA3000];
- serdes83xx_t serdes[2]; /* SerDes Registers */
- u8 res11[0xCE00];
- rom83xx_t rom; /* On Chip ROM */
-} immap_t;
-
-#elif defined(CONFIG_MPC8360)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- u8 res0[0x200];
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- qepi83xx_t qepi; /* QE Ports Interrupts Registers */
- u8 res1[0x300];
- u8 dll_ddr[0x100];
- u8 dll_lbc[0x100];
- u8 res2[0x200];
- qepio83xx_t qepio; /* QE Parallel I/O ports */
- qesba83xx_t qesba; /* QE Secondary Bus Access Windows */
- u8 res3[0x400];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res4[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res5[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res6[0x2000];
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res7[128];
- ios83xx_t ios; /* Sequencer (IOS) */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res8[0x4A00];
- ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */
- u8 res9[0x22000];
- security83xx_t security;
- u8 res10[0xC0000];
- u8 qe[0x100000]; /* QE block */
-} immap_t;
-
-#elif defined(CONFIG_MPC832x)
-typedef struct immap {
- sysconf83xx_t sysconf; /* System configuration */
- wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
- rtclk83xx_t rtc; /* Real Time Clock Module Registers */
- rtclk83xx_t pit; /* Periodic Interval Timer */
- gtm83xx_t gtm[2]; /* Global Timers Module */
- ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
- arbiter83xx_t arbiter; /* System Arbiter Registers */
- reset83xx_t reset; /* Reset Module */
- clk83xx_t clk; /* System Clock Module */
- pmc83xx_t pmc; /* Power Management Control Module */
- qepi83xx_t qepi; /* QE Ports Interrupts Registers */
- u8 res0[0x300];
- u8 dll_ddr[0x100];
- u8 dll_lbc[0x100];
- u8 res1[0x200];
- qepio83xx_t qepio; /* QE Parallel I/O ports */
- u8 res2[0x800];
- ddr83xx_t ddr; /* DDR Memory Controller Memory */
- fsl_i2c_t i2c[2]; /* I2C Controllers */
- u8 res3[0x1300];
- duart83xx_t duart[2]; /* DUART */
- u8 res4[0x900];
- fsl_lbus_t lbus; /* Local Bus Controller Registers */
- u8 res5[0x2000];
- dma83xx_t dma; /* DMA */
- pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
- u8 res6[128];
- ios83xx_t ios; /* Sequencer (IOS) */
- pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
- u8 res7[0x27A00];
- security83xx_t security;
- u8 res8[0xC0000];
- u8 qe[0x100000]; /* QE block */
-} immap_t;
-#endif
-
-#define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000)
-#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
-#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000)
-#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
-
-#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
-#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000
-#endif
-#define CONFIG_SYS_MPC83xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
-
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_MDIO1_OFFSET 0x24000
-
-#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
-#endif /* __IMMAP_83xx__ */
+++ /dev/null
-/*
- * MPC85xx Internal Memory Map
- *
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * Copyright(c) 2002,2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __IMMAP_85xx__
-#define __IMMAP_85xx__
-
-#include <asm/types.h>
-#include <asm/fsl_dma.h>
-#include <asm/fsl_i2c.h>
-#include <asm/fsl_lbc.h>
-
-typedef struct ccsr_local {
- u32 ccsrbarh; /* CCSR Base Addr High */
- u32 ccsrbarl; /* CCSR Base Addr Low */
- u32 ccsrar; /* CCSR Attr */
-#define CCSRAR_C 0x80000000 /* Commit */
- u8 res1[4];
- u32 altcbarh; /* Alternate Configuration Base Addr High */
- u32 altcbarl; /* Alternate Configuration Base Addr Low */
- u32 altcar; /* Alternate Configuration Attr */
- u8 res2[4];
- u32 bstrh; /* Boot space translation high */
- u32 bstrl; /* Boot space translation Low */
- u32 bstrar; /* Boot space translation attributes */
- u8 res3[0xbd4];
- struct {
- u32 lawbarh; /* LAWn base addr high */
- u32 lawbarl; /* LAWn base addr low */
- u32 lawar; /* LAWn attributes */
- u8 res4[4];
- } law[32];
- u8 res35[0x204];
-} ccsr_local_t;
-
-/* Local-Access Registers & ECM Registers */
-typedef struct ccsr_local_ecm {
- u32 ccsrbar; /* CCSR Base Addr */
- u8 res1[4];
- u32 altcbar; /* Alternate Configuration Base Addr */
- u8 res2[4];
- u32 altcar; /* Alternate Configuration Attr */
- u8 res3[12];
- u32 bptr; /* Boot Page Translation */
- u8 res4[3044];
- u32 lawbar0; /* Local Access Window 0 Base Addr */
- u8 res5[4];
- u32 lawar0; /* Local Access Window 0 Attrs */
- u8 res6[20];
- u32 lawbar1; /* Local Access Window 1 Base Addr */
- u8 res7[4];
- u32 lawar1; /* Local Access Window 1 Attrs */
- u8 res8[20];
- u32 lawbar2; /* Local Access Window 2 Base Addr */
- u8 res9[4];
- u32 lawar2; /* Local Access Window 2 Attrs */
- u8 res10[20];
- u32 lawbar3; /* Local Access Window 3 Base Addr */
- u8 res11[4];
- u32 lawar3; /* Local Access Window 3 Attrs */
- u8 res12[20];
- u32 lawbar4; /* Local Access Window 4 Base Addr */
- u8 res13[4];
- u32 lawar4; /* Local Access Window 4 Attrs */
- u8 res14[20];
- u32 lawbar5; /* Local Access Window 5 Base Addr */
- u8 res15[4];
- u32 lawar5; /* Local Access Window 5 Attrs */
- u8 res16[20];
- u32 lawbar6; /* Local Access Window 6 Base Addr */
- u8 res17[4];
- u32 lawar6; /* Local Access Window 6 Attrs */
- u8 res18[20];
- u32 lawbar7; /* Local Access Window 7 Base Addr */
- u8 res19[4];
- u32 lawar7; /* Local Access Window 7 Attrs */
- u8 res19_8a[20];
- u32 lawbar8; /* Local Access Window 8 Base Addr */
- u8 res19_8b[4];
- u32 lawar8; /* Local Access Window 8 Attrs */
- u8 res19_9a[20];
- u32 lawbar9; /* Local Access Window 9 Base Addr */
- u8 res19_9b[4];
- u32 lawar9; /* Local Access Window 9 Attrs */
- u8 res19_10a[20];
- u32 lawbar10; /* Local Access Window 10 Base Addr */
- u8 res19_10b[4];
- u32 lawar10; /* Local Access Window 10 Attrs */
- u8 res19_11a[20];
- u32 lawbar11; /* Local Access Window 11 Base Addr */
- u8 res19_11b[4];
- u32 lawar11; /* Local Access Window 11 Attrs */
- u8 res20[652];
- u32 eebacr; /* ECM CCB Addr Configuration */
- u8 res21[12];
- u32 eebpcr; /* ECM CCB Port Configuration */
- u8 res22[3564];
- u32 eedr; /* ECM Error Detect */
- u8 res23[4];
- u32 eeer; /* ECM Error Enable */
- u32 eeatr; /* ECM Error Attrs Capture */
- u32 eeadr; /* ECM Error Addr Capture */
- u8 res24[492];
-} ccsr_local_ecm_t;
-
-/* DDR memory controller registers */
-typedef struct ccsr_ddr {
- u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
- u8 res1[4];
- u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
- u8 res2[4];
- u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
- u8 res3[4];
- u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
- u8 res4[100];
- u32 cs0_config; /* Chip Select Configuration */
- u32 cs1_config; /* Chip Select Configuration */
- u32 cs2_config; /* Chip Select Configuration */
- u32 cs3_config; /* Chip Select Configuration */
- u8 res4a[48];
- u32 cs0_config_2; /* Chip Select Configuration 2 */
- u32 cs1_config_2; /* Chip Select Configuration 2 */
- u32 cs2_config_2; /* Chip Select Configuration 2 */
- u32 cs3_config_2; /* Chip Select Configuration 2 */
- u8 res5[48];
- u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
- u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
- u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
- u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
- u32 sdram_cfg; /* SDRAM Control Configuration */
- u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
- u32 sdram_mode; /* SDRAM Mode Configuration */
- u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
- u32 sdram_md_cntl; /* SDRAM Mode Control */
- u32 sdram_interval; /* SDRAM Interval Configuration */
- u32 sdram_data_init; /* SDRAM Data initialization */
- u8 res6[4];
- u32 sdram_clk_cntl; /* SDRAM Clock Control */
- u8 res7[20];
- u32 init_addr; /* training init addr */
- u32 init_ext_addr; /* training init extended addr */
- u8 res8_1[16];
- u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
- u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
- u8 reg8_1a[8];
- u32 ddr_zq_cntl; /* ZQ calibration control*/
- u32 ddr_wrlvl_cntl; /* write leveling control*/
- u8 reg8_1aa[4];
- u32 ddr_sr_cntr; /* self refresh counter */
- u32 ddr_sdram_rcw_1; /* Control Words 1 */
- u32 ddr_sdram_rcw_2; /* Control Words 2 */
- u8 res8_1b[2456];
- u32 ddr_dsr1; /* Debug Status 1 */
- u32 ddr_dsr2; /* Debug Status 2 */
- u32 ddr_cdr1; /* Control Driver 1 */
- u32 ddr_cdr2; /* Control Driver 2 */
- u8 res8_1c[200];
- u32 ip_rev1; /* IP Block Revision 1 */
- u32 ip_rev2; /* IP Block Revision 2 */
- u8 res8_2[512];
- u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
- u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
- u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
- u8 res9[20];
- u32 capture_data_hi; /* Data Path Read Capture High */
- u32 capture_data_lo; /* Data Path Read Capture Low */
- u32 capture_ecc; /* Data Path Read Capture ECC */
- u8 res10[20];
- u32 err_detect; /* Error Detect */
- u32 err_disable; /* Error Disable */
- u32 err_int_en;
- u32 capture_attributes; /* Error Attrs Capture */
- u32 capture_address; /* Error Addr Capture */
- u32 capture_ext_address; /* Error Extended Addr Capture */
- u32 err_sbe; /* Single-Bit ECC Error Management */
- u8 res11[164];
- u32 debug_1;
- u32 debug_2;
- u32 debug_3;
- u32 debug_4;
- u32 debug_5;
- u32 debug_6;
- u32 debug_7;
- u32 debug_8;
- u32 debug_9;
- u32 debug_10;
- u32 debug_11;
- u32 debug_12;
- u32 debug_13;
- u32 debug_14;
- u32 debug_15;
- u32 debug_16;
- u32 debug_17;
- u32 debug_18;
- u8 res12[184];
-} ccsr_ddr_t;
-
-/* I2C Registers */
-typedef struct ccsr_i2c {
- struct fsl_i2c i2c[1];
- u8 res[4096 - 1 * sizeof(struct fsl_i2c)];
-} ccsr_i2c_t;
-
-#if defined(CONFIG_MPC8540) \
- || defined(CONFIG_MPC8541) \
- || defined(CONFIG_MPC8548) \
- || defined(CONFIG_MPC8555)
-/* DUART Registers */
-typedef struct ccsr_duart {
- u8 res1[1280];
-/* URBR1, UTHR1, UDLB1 with the same addr */
- u8 urbr1_uthr1_udlb1;
-/* UIER1, UDMB1 with the same addr01 */
- u8 uier1_udmb1;
-/* UIIR1, UFCR1, UAFR1 with the same addr */
- u8 uiir1_ufcr1_uafr1;
- u8 ulcr1; /* UART1 Line Control */
- u8 umcr1; /* UART1 Modem Control */
- u8 ulsr1; /* UART1 Line Status */
- u8 umsr1; /* UART1 Modem Status */
- u8 uscr1; /* UART1 Scratch */
- u8 res2[8];
- u8 udsr1; /* UART1 DMA Status */
- u8 res3[239];
-/* URBR2, UTHR2, UDLB2 with the same addr */
- u8 urbr2_uthr2_udlb2;
-/* UIER2, UDMB2 with the same addr */
- u8 uier2_udmb2;
-/* UIIR2, UFCR2, UAFR2 with the same addr */
- u8 uiir2_ufcr2_uafr2;
- u8 ulcr2; /* UART2 Line Control */
- u8 umcr2; /* UART2 Modem Control */
- u8 ulsr2; /* UART2 Line Status */
- u8 umsr2; /* UART2 Modem Status */
- u8 uscr2; /* UART2 Scratch */
- u8 res4[8];
- u8 udsr2; /* UART2 DMA Status */
- u8 res5[2543];
-} ccsr_duart_t;
-#else /* MPC8560 uses UART on its CPM */
-typedef struct ccsr_duart {
- u8 res[4096];
-} ccsr_duart_t;
-#endif
-
-/* Local Bus Controller Registers */
-typedef struct ccsr_lbc {
- u32 br0; /* LBC Base 0 */
- u32 or0; /* LBC Options 0 */
- u32 br1; /* LBC Base 1 */
- u32 or1; /* LBC Options 1 */
- u32 br2; /* LBC Base 2 */
- u32 or2; /* LBC Options 2 */
- u32 br3; /* LBC Base 3 */
- u32 or3; /* LBC Options 3 */
- u32 br4; /* LBC Base 4 */
- u32 or4; /* LBC Options 4 */
- u32 br5; /* LBC Base 5 */
- u32 or5; /* LBC Options 5 */
- u32 br6; /* LBC Base 6 */
- u32 or6; /* LBC Options 6 */
- u32 br7; /* LBC Base 7 */
- u32 or7; /* LBC Options 7 */
- u8 res1[40];
- u32 mar; /* LBC UPM Addr */
- u8 res2[4];
- u32 mamr; /* LBC UPMA Mode */
- u32 mbmr; /* LBC UPMB Mode */
- u32 mcmr; /* LBC UPMC Mode */
- u8 res3[8];
- u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */
- u32 mdr; /* LBC UPM Data */
- u8 res4[8];
- u32 lsdmr; /* LBC SDRAM Mode */
- u8 res5[8];
- u32 lurt; /* LBC UPM Refresh Timer */
- u32 lsrt; /* LBC SDRAM Refresh Timer */
- u8 res6[8];
- u32 ltesr; /* LBC Transfer Error Status */
- u32 ltedr; /* LBC Transfer Error Disable */
- u32 lteir; /* LBC Transfer Error IRQ */
- u32 lteatr; /* LBC Transfer Error Attrs */
- u32 ltear; /* LBC Transfer Error Addr */
- u8 res7[12];
- u32 lbcr; /* LBC Configuration */
- u32 lcrr; /* LBC Clock Ratio */
- u8 res8[3880];
-} ccsr_lbc_t;
-
-/* eSPI Registers */
-typedef struct ccsr_espi {
- u32 mode; /* eSPI mode */
- u32 event; /* eSPI event */
- u32 mask; /* eSPI mask */
- u32 com; /* eSPI command */
- u32 tx; /* eSPI transmit FIFO access */
- u32 rx; /* eSPI receive FIFO access */
- u8 res1[8]; /* reserved */
- u32 csmode[4]; /* 0x2c: sSPI CS0/1/2/3 mode */
- u8 res2[4048]; /* fill up to 0x1000 */
-} ccsr_espi_t;
-
-/* PCI Registers */
-typedef struct ccsr_pcix {
- u32 cfg_addr; /* PCIX Configuration Addr */
- u32 cfg_data; /* PCIX Configuration Data */
- u32 int_ack; /* PCIX IRQ Acknowledge */
- u8 res1[3060];
- u32 potar0; /* PCIX Outbound Transaction Addr 0 */
- u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
- u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
- u32 powbear0; /* PCIX Outbound Window Base Extended Addr 0 */
- u32 powar0; /* PCIX Outbound Window Attrs 0 */
- u8 res2[12];
- u32 potar1; /* PCIX Outbound Transaction Addr 1 */
- u32 potear1; /* PCIX Outbound Translation Extended Addr 1 */
- u32 powbar1; /* PCIX Outbound Window Base Addr 1 */
- u32 powbear1; /* PCIX Outbound Window Base Extended Addr 1 */
- u32 powar1; /* PCIX Outbound Window Attrs 1 */
- u8 res3[12];
- u32 potar2; /* PCIX Outbound Transaction Addr 2 */
- u32 potear2; /* PCIX Outbound Translation Extended Addr 2 */
- u32 powbar2; /* PCIX Outbound Window Base Addr 2 */
- u32 powbear2; /* PCIX Outbound Window Base Extended Addr 2 */
- u32 powar2; /* PCIX Outbound Window Attrs 2 */
- u8 res4[12];
- u32 potar3; /* PCIX Outbound Transaction Addr 3 */
- u32 potear3; /* PCIX Outbound Translation Extended Addr 3 */
- u32 powbar3; /* PCIX Outbound Window Base Addr 3 */
- u32 powbear3; /* PCIX Outbound Window Base Extended Addr 3 */
- u32 powar3; /* PCIX Outbound Window Attrs 3 */
- u8 res5[12];
- u32 potar4; /* PCIX Outbound Transaction Addr 4 */
- u32 potear4; /* PCIX Outbound Translation Extended Addr 4 */
- u32 powbar4; /* PCIX Outbound Window Base Addr 4 */
- u32 powbear4; /* PCIX Outbound Window Base Extended Addr 4 */
- u32 powar4; /* PCIX Outbound Window Attrs 4 */
- u8 res6[268];
- u32 pitar3; /* PCIX Inbound Translation Addr 3 */
- u32 pitear3; /* PCIX Inbound Translation Extended Addr 3 */
- u32 piwbar3; /* PCIX Inbound Window Base Addr 3 */
- u32 piwbear3; /* PCIX Inbound Window Base Extended Addr 3 */
- u32 piwar3; /* PCIX Inbound Window Attrs 3 */
- u8 res7[12];
- u32 pitar2; /* PCIX Inbound Translation Addr 2 */
- u32 pitear2; /* PCIX Inbound Translation Extended Addr 2 */
- u32 piwbar2; /* PCIX Inbound Window Base Addr 2 */
- u32 piwbear2; /* PCIX Inbound Window Base Extended Addr 2 */
- u32 piwar2; /* PCIX Inbound Window Attrs 2 */
- u8 res8[12];
- u32 pitar1; /* PCIX Inbound Translation Addr 1 */
- u32 pitear1; /* PCIX Inbound Translation Extended Addr 1 */
- u32 piwbar1; /* PCIX Inbound Window Base Addr 1 */
- u8 res9[4];
- u32 piwar1; /* PCIX Inbound Window Attrs 1 */
- u8 res10[12];
- u32 pedr; /* PCIX Error Detect */
- u32 pecdr; /* PCIX Error Capture Disable */
- u32 peer; /* PCIX Error Enable */
- u32 peattrcr; /* PCIX Error Attrs Capture */
- u32 peaddrcr; /* PCIX Error Addr Capture */
- u32 peextaddrcr; /* PCIX Error Extended Addr Capture */
- u32 pedlcr; /* PCIX Error Data Low Capture */
- u32 pedhcr; /* PCIX Error Error Data High Capture */
- u32 gas_timr; /* PCIX Gasket Timer */
- u8 res11[476];
-} ccsr_pcix_t;
-
-#define PCIX_COMMAND 0x62
-#define POWAR_EN 0x80000000
-#define POWAR_IO_READ 0x00080000
-#define POWAR_MEM_READ 0x00040000
-#define POWAR_IO_WRITE 0x00008000
-#define POWAR_MEM_WRITE 0x00004000
-#define POWAR_MEM_512M 0x0000001c
-#define POWAR_IO_1M 0x00000013
-
-#define PIWAR_EN 0x80000000
-#define PIWAR_PF 0x20000000
-#define PIWAR_LOCAL 0x00f00000
-#define PIWAR_READ_SNOOP 0x00050000
-#define PIWAR_WRITE_SNOOP 0x00005000
-#define PIWAR_MEM_2G 0x0000001e
-
-typedef struct ccsr_gpio {
- u32 gpdir;
- u32 gpodr;
- u32 gpdat;
- u32 gpier;
- u32 gpimr;
- u32 gpicr;
-} ccsr_gpio_t;
-
-/* L2 Cache Registers */
-typedef struct ccsr_l2cache {
- u32 l2ctl; /* L2 configuration 0 */
- u8 res1[12];
- u32 l2cewar0; /* L2 cache external write addr 0 */
- u8 res2[4];
- u32 l2cewcr0; /* L2 cache external write control 0 */
- u8 res3[4];
- u32 l2cewar1; /* L2 cache external write addr 1 */
- u8 res4[4];
- u32 l2cewcr1; /* L2 cache external write control 1 */
- u8 res5[4];
- u32 l2cewar2; /* L2 cache external write addr 2 */
- u8 res6[4];
- u32 l2cewcr2; /* L2 cache external write control 2 */
- u8 res7[4];
- u32 l2cewar3; /* L2 cache external write addr 3 */
- u8 res8[4];
- u32 l2cewcr3; /* L2 cache external write control 3 */
- u8 res9[180];
- u32 l2srbar0; /* L2 memory-mapped SRAM base addr 0 */
- u8 res10[4];
- u32 l2srbar1; /* L2 memory-mapped SRAM base addr 1 */
- u8 res11[3316];
- u32 l2errinjhi; /* L2 error injection mask high */
- u32 l2errinjlo; /* L2 error injection mask low */
- u32 l2errinjctl; /* L2 error injection tag/ECC control */
- u8 res12[20];
- u32 l2captdatahi; /* L2 error data high capture */
- u32 l2captdatalo; /* L2 error data low capture */
- u32 l2captecc; /* L2 error ECC capture */
- u8 res13[20];
- u32 l2errdet; /* L2 error detect */
- u32 l2errdis; /* L2 error disable */
- u32 l2errinten; /* L2 error interrupt enable */
- u32 l2errattr; /* L2 error attributes capture */
- u32 l2erraddr; /* L2 error addr capture */
- u8 res14[4];
- u32 l2errctl; /* L2 error control */
- u8 res15[420];
-} ccsr_l2cache_t;
-
-#define MPC85xx_L2CTL_L2E 0x80000000
-#define MPC85xx_L2CTL_L2SRAM_ENTIRE 0x00010000
-#define MPC85xx_L2ERRDIS_MBECC 0x00000008
-#define MPC85xx_L2ERRDIS_SBECC 0x00000004
-
-/* DMA Registers */
-typedef struct ccsr_dma {
- u8 res1[256];
- struct fsl_dma dma[4];
- u32 dgsr; /* DMA General Status */
- u8 res2[11516];
-} ccsr_dma_t;
-
-/* tsec */
-typedef struct ccsr_tsec {
- u8 res1[16];
- u32 ievent; /* IRQ Event */
- u32 imask; /* IRQ Mask */
- u32 edis; /* Error Disabled */
- u8 res2[4];
- u32 ecntrl; /* Ethernet Control */
- u32 minflr; /* Minimum Frame Len */
- u32 ptv; /* Pause Time Value */
- u32 dmactrl; /* DMA Control */
- u32 tbipa; /* TBI PHY Addr */
- u8 res3[88];
- u32 fifo_tx_thr; /* FIFO transmit threshold */
- u8 res4[8];
- u32 fifo_tx_starve; /* FIFO transmit starve */
- u32 fifo_tx_starve_shutoff; /* FIFO transmit starve shutoff */
- u8 res5[96];
- u32 tctrl; /* TX Control */
- u32 tstat; /* TX Status */
- u8 res6[4];
- u32 tbdlen; /* TX Buffer Desc Data Len */
- u8 res7[16];
- u32 ctbptrh; /* Current TX Buffer Desc Ptr High */
- u32 ctbptr; /* Current TX Buffer Desc Ptr */
- u8 res8[88];
- u32 tbptrh; /* TX Buffer Desc Ptr High */
- u32 tbptr; /* TX Buffer Desc Ptr Low */
- u8 res9[120];
- u32 tbaseh; /* TX Desc Base Addr High */
- u32 tbase; /* TX Desc Base Addr */
- u8 res10[168];
- u32 ostbd; /* Out-of-Sequence(OOS) TX Buffer Desc */
- u32 ostbdp; /* OOS TX Data Buffer Ptr */
- u32 os32tbdp; /* OOS 32 Bytes TX Data Buffer Ptr Low */
- u32 os32iptrh; /* OOS 32 Bytes TX Insert Ptr High */
- u32 os32iptrl; /* OOS 32 Bytes TX Insert Ptr Low */
- u32 os32tbdr; /* OOS 32 Bytes TX Reserved */
- u32 os32iil; /* OOS 32 Bytes TX Insert Idx/Len */
- u8 res11[52];
- u32 rctrl; /* RX Control */
- u32 rstat; /* RX Status */
- u8 res12[4];
- u32 rbdlen; /* RxBD Data Len */
- u8 res13[16];
- u32 crbptrh; /* Current RX Buffer Desc Ptr High */
- u32 crbptr; /* Current RX Buffer Desc Ptr */
- u8 res14[24];
- u32 mrblr; /* Maximum RX Buffer Len */
- u32 mrblr2r3; /* Maximum RX Buffer Len R2R3 */
- u8 res15[56];
- u32 rbptrh; /* RX Buffer Desc Ptr High 0 */
- u32 rbptr; /* RX Buffer Desc Ptr */
- u32 rbptrh1; /* RX Buffer Desc Ptr High 1 */
- u32 rbptrl1; /* RX Buffer Desc Ptr Low 1 */
- u32 rbptrh2; /* RX Buffer Desc Ptr High 2 */
- u32 rbptrl2; /* RX Buffer Desc Ptr Low 2 */
- u32 rbptrh3; /* RX Buffer Desc Ptr High 3 */
- u32 rbptrl3; /* RX Buffer Desc Ptr Low 3 */
- u8 res16[96];
- u32 rbaseh; /* RX Desc Base Addr High 0 */
- u32 rbase; /* RX Desc Base Addr */
- u32 rbaseh1; /* RX Desc Base Addr High 1 */
- u32 rbasel1; /* RX Desc Base Addr Low 1 */
- u32 rbaseh2; /* RX Desc Base Addr High 2 */
- u32 rbasel2; /* RX Desc Base Addr Low 2 */
- u32 rbaseh3; /* RX Desc Base Addr High 3 */
- u32 rbasel3; /* RX Desc Base Addr Low 3 */
- u8 res17[224];
- u32 maccfg1; /* MAC Configuration 1 */
- u32 maccfg2; /* MAC Configuration 2 */
- u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */
- u32 hafdup; /* Half Duplex */
- u32 maxfrm; /* Maximum Frame Len */
- u8 res18[12];
- u32 miimcfg; /* MII Management Configuration */
- u32 miimcom; /* MII Management Cmd */
- u32 miimadd; /* MII Management Addr */
- u32 miimcon; /* MII Management Control */
- u32 miimstat; /* MII Management Status */
- u32 miimind; /* MII Management Indicator */
- u8 res19[4];
- u32 ifstat; /* Interface Status */
- u32 macstnaddr1; /* Station Addr Part 1 */
- u32 macstnaddr2; /* Station Addr Part 2 */
- u8 res20[312];
- u32 tr64; /* TX & RX 64-byte Frame Counter */
- u32 tr127; /* TX & RX 65-127 byte Frame Counter */
- u32 tr255; /* TX & RX 128-255 byte Frame Counter */
- u32 tr511; /* TX & RX 256-511 byte Frame Counter */
- u32 tr1k; /* TX & RX 512-1023 byte Frame Counter */
- u32 trmax; /* TX & RX 1024-1518 byte Frame Counter */
- u32 trmgv; /* TX & RX 1519-1522 byte Good VLAN Frame */
- u32 rbyt; /* RX Byte Counter */
- u32 rpkt; /* RX Packet Counter */
- u32 rfcs; /* RX FCS Error Counter */
- u32 rmca; /* RX Multicast Packet Counter */
- u32 rbca; /* RX Broadcast Packet Counter */
- u32 rxcf; /* RX Control Frame Packet Counter */
- u32 rxpf; /* RX Pause Frame Packet Counter */
- u32 rxuo; /* RX Unknown OP Code Counter */
- u32 raln; /* RX Alignment Error Counter */
- u32 rflr; /* RX Frame Len Error Counter */
- u32 rcde; /* RX Code Error Counter */
- u32 rcse; /* RX Carrier Sense Error Counter */
- u32 rund; /* RX Undersize Packet Counter */
- u32 rovr; /* RX Oversize Packet Counter */
- u32 rfrg; /* RX Fragments Counter */
- u32 rjbr; /* RX Jabber Counter */
- u32 rdrp; /* RX Drop Counter */
- u32 tbyt; /* TX Byte Counter Counter */
- u32 tpkt; /* TX Packet Counter */
- u32 tmca; /* TX Multicast Packet Counter */
- u32 tbca; /* TX Broadcast Packet Counter */
- u32 txpf; /* TX Pause Control Frame Counter */
- u32 tdfr; /* TX Deferral Packet Counter */
- u32 tedf; /* TX Excessive Deferral Packet Counter */
- u32 tscl; /* TX Single Collision Packet Counter */
- u32 tmcl; /* TX Multiple Collision Packet Counter */
- u32 tlcl; /* TX Late Collision Packet Counter */
- u32 txcl; /* TX Excessive Collision Packet Counter */
- u32 tncl; /* TX Total Collision Counter */
- u8 res21[4];
- u32 tdrp; /* TX Drop Frame Counter */
- u32 tjbr; /* TX Jabber Frame Counter */
- u32 tfcs; /* TX FCS Error Counter */
- u32 txcf; /* TX Control Frame Counter */
- u32 tovr; /* TX Oversize Frame Counter */
- u32 tund; /* TX Undersize Frame Counter */
- u32 tfrg; /* TX Fragments Frame Counter */
- u32 car1; /* Carry One */
- u32 car2; /* Carry Two */
- u32 cam1; /* Carry Mask One */
- u32 cam2; /* Carry Mask Two */
- u8 res22[192];
- u32 iaddr0; /* Indivdual addr 0 */
- u32 iaddr1; /* Indivdual addr 1 */
- u32 iaddr2; /* Indivdual addr 2 */
- u32 iaddr3; /* Indivdual addr 3 */
- u32 iaddr4; /* Indivdual addr 4 */
- u32 iaddr5; /* Indivdual addr 5 */
- u32 iaddr6; /* Indivdual addr 6 */
- u32 iaddr7; /* Indivdual addr 7 */
- u8 res23[96];
- u32 gaddr0; /* Global addr 0 */
- u32 gaddr1; /* Global addr 1 */
- u32 gaddr2; /* Global addr 2 */
- u32 gaddr3; /* Global addr 3 */
- u32 gaddr4; /* Global addr 4 */
- u32 gaddr5; /* Global addr 5 */
- u32 gaddr6; /* Global addr 6 */
- u32 gaddr7; /* Global addr 7 */
- u8 res24[96];
- u32 pmd0; /* Pattern Match Data */
- u8 res25[4];
- u32 pmask0; /* Pattern Mask */
- u8 res26[4];
- u32 pcntrl0; /* Pattern Match Control */
- u8 res27[4];
- u32 pattrb0; /* Pattern Match Attrs */
- u32 pattrbeli0; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd1; /* Pattern Match Data */
- u8 res28[4];
- u32 pmask1; /* Pattern Mask */
- u8 res29[4];
- u32 pcntrl1; /* Pattern Match Control */
- u8 res30[4];
- u32 pattrb1; /* Pattern Match Attrs */
- u32 pattrbeli1; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd2; /* Pattern Match Data */
- u8 res31[4];
- u32 pmask2; /* Pattern Mask */
- u8 res32[4];
- u32 pcntrl2; /* Pattern Match Control */
- u8 res33[4];
- u32 pattrb2; /* Pattern Match Attrs */
- u32 pattrbeli2; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd3; /* Pattern Match Data */
- u8 res34[4];
- u32 pmask3; /* Pattern Mask */
- u8 res35[4];
- u32 pcntrl3; /* Pattern Match Control */
- u8 res36[4];
- u32 pattrb3; /* Pattern Match Attrs */
- u32 pattrbeli3; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd4; /* Pattern Match Data */
- u8 res37[4];
- u32 pmask4; /* Pattern Mask */
- u8 res38[4];
- u32 pcntrl4; /* Pattern Match Control */
- u8 res39[4];
- u32 pattrb4; /* Pattern Match Attrs */
- u32 pattrbeli4; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd5; /* Pattern Match Data */
- u8 res40[4];
- u32 pmask5; /* Pattern Mask */
- u8 res41[4];
- u32 pcntrl5; /* Pattern Match Control */
- u8 res42[4];
- u32 pattrb5; /* Pattern Match Attrs */
- u32 pattrbeli5; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd6; /* Pattern Match Data */
- u8 res43[4];
- u32 pmask6; /* Pattern Mask */
- u8 res44[4];
- u32 pcntrl6; /* Pattern Match Control */
- u8 res45[4];
- u32 pattrb6; /* Pattern Match Attrs */
- u32 pattrbeli6; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd7; /* Pattern Match Data */
- u8 res46[4];
- u32 pmask7; /* Pattern Mask */
- u8 res47[4];
- u32 pcntrl7; /* Pattern Match Control */
- u8 res48[4];
- u32 pattrb7; /* Pattern Match Attrs */
- u32 pattrbeli7; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd8; /* Pattern Match Data */
- u8 res49[4];
- u32 pmask8; /* Pattern Mask */
- u8 res50[4];
- u32 pcntrl8; /* Pattern Match Control */
- u8 res51[4];
- u32 pattrb8; /* Pattern Match Attrs */
- u32 pattrbeli8; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd9; /* Pattern Match Data */
- u8 res52[4];
- u32 pmask9; /* Pattern Mask */
- u8 res53[4];
- u32 pcntrl9; /* Pattern Match Control */
- u8 res54[4];
- u32 pattrb9; /* Pattern Match Attrs */
- u32 pattrbeli9; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd10; /* Pattern Match Data */
- u8 res55[4];
- u32 pmask10; /* Pattern Mask */
- u8 res56[4];
- u32 pcntrl10; /* Pattern Match Control */
- u8 res57[4];
- u32 pattrb10; /* Pattern Match Attrs */
- u32 pattrbeli10; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd11; /* Pattern Match Data */
- u8 res58[4];
- u32 pmask11; /* Pattern Mask */
- u8 res59[4];
- u32 pcntrl11; /* Pattern Match Control */
- u8 res60[4];
- u32 pattrb11; /* Pattern Match Attrs */
- u32 pattrbeli11; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd12; /* Pattern Match Data */
- u8 res61[4];
- u32 pmask12; /* Pattern Mask */
- u8 res62[4];
- u32 pcntrl12; /* Pattern Match Control */
- u8 res63[4];
- u32 pattrb12; /* Pattern Match Attrs */
- u32 pattrbeli12; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd13; /* Pattern Match Data */
- u8 res64[4];
- u32 pmask13; /* Pattern Mask */
- u8 res65[4];
- u32 pcntrl13; /* Pattern Match Control */
- u8 res66[4];
- u32 pattrb13; /* Pattern Match Attrs */
- u32 pattrbeli13; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd14; /* Pattern Match Data */
- u8 res67[4];
- u32 pmask14; /* Pattern Mask */
- u8 res68[4];
- u32 pcntrl14; /* Pattern Match Control */
- u8 res69[4];
- u32 pattrb14; /* Pattern Match Attrs */
- u32 pattrbeli14; /* Pattern Match Attrs Extract Len & Idx */
- u32 pmd15; /* Pattern Match Data */
- u8 res70[4];
- u32 pmask15; /* Pattern Mask */
- u8 res71[4];
- u32 pcntrl15; /* Pattern Match Control */
- u8 res72[4];
- u32 pattrb15; /* Pattern Match Attrs */
- u32 pattrbeli15; /* Pattern Match Attrs Extract Len & Idx */
- u8 res73[248];
- u32 attr; /* Attrs */
- u32 attreli; /* Attrs Extract Len & Idx */
- u8 res74[1024];
-} ccsr_tsec_t;
-
-/* PIC Registers */
-typedef struct ccsr_pic {
- u8 res1[64];
- u32 ipidr0; /* Interprocessor IRQ Dispatch 0 */
- u8 res2[12];
- u32 ipidr1; /* Interprocessor IRQ Dispatch 1 */
- u8 res3[12];
- u32 ipidr2; /* Interprocessor IRQ Dispatch 2 */
- u8 res4[12];
- u32 ipidr3; /* Interprocessor IRQ Dispatch 3 */
- u8 res5[12];
- u32 ctpr; /* Current Task Priority */
- u8 res6[12];
- u32 whoami; /* Who Am I */
- u8 res7[12];
- u32 iack; /* IRQ Acknowledge */
- u8 res8[12];
- u32 eoi; /* End Of IRQ */
- u8 res9[3916];
- u32 frr; /* Feature Reporting */
- u8 res10[28];
- u32 gcr; /* Global Configuration */
-#define MPC85xx_PICGCR_RST 0x80000000
-#define MPC85xx_PICGCR_M 0x20000000
- u8 res11[92];
- u32 vir; /* Vendor Identification */
- u8 res12[12];
- u32 pir; /* Processor Initialization */
- u8 res13[12];
- u32 ipivpr0; /* IPI Vector/Priority 0 */
- u8 res14[12];
- u32 ipivpr1; /* IPI Vector/Priority 1 */
- u8 res15[12];
- u32 ipivpr2; /* IPI Vector/Priority 2 */
- u8 res16[12];
- u32 ipivpr3; /* IPI Vector/Priority 3 */
- u8 res17[12];
- u32 svr; /* Spurious Vector */
- u8 res18[12];
- u32 tfrr; /* Timer Frequency Reporting */
- u8 res19[12];
- u32 gtccr0; /* Global Timer Current Count 0 */
- u8 res20[12];
- u32 gtbcr0; /* Global Timer Base Count 0 */
- u8 res21[12];
- u32 gtvpr0; /* Global Timer Vector/Priority 0 */
- u8 res22[12];
- u32 gtdr0; /* Global Timer Destination 0 */
- u8 res23[12];
- u32 gtccr1; /* Global Timer Current Count 1 */
- u8 res24[12];
- u32 gtbcr1; /* Global Timer Base Count 1 */
- u8 res25[12];
- u32 gtvpr1; /* Global Timer Vector/Priority 1 */
- u8 res26[12];
- u32 gtdr1; /* Global Timer Destination 1 */
- u8 res27[12];
- u32 gtccr2; /* Global Timer Current Count 2 */
- u8 res28[12];
- u32 gtbcr2; /* Global Timer Base Count 2 */
- u8 res29[12];
- u32 gtvpr2; /* Global Timer Vector/Priority 2 */
- u8 res30[12];
- u32 gtdr2; /* Global Timer Destination 2 */
- u8 res31[12];
- u32 gtccr3; /* Global Timer Current Count 3 */
- u8 res32[12];
- u32 gtbcr3; /* Global Timer Base Count 3 */
- u8 res33[12];
- u32 gtvpr3; /* Global Timer Vector/Priority 3 */
- u8 res34[12];
- u32 gtdr3; /* Global Timer Destination 3 */
- u8 res35[268];
- u32 tcr; /* Timer Control */
- u8 res36[12];
- u32 irqsr0; /* IRQ_OUT Summary 0 */
- u8 res37[12];
- u32 irqsr1; /* IRQ_OUT Summary 1 */
- u8 res38[12];
- u32 cisr0; /* Critical IRQ Summary 0 */
- u8 res39[12];
- u32 cisr1; /* Critical IRQ Summary 1 */
- u8 res40[188];
- u32 msgr0; /* Message 0 */
- u8 res41[12];
- u32 msgr1; /* Message 1 */
- u8 res42[12];
- u32 msgr2; /* Message 2 */
- u8 res43[12];
- u32 msgr3; /* Message 3 */
- u8 res44[204];
- u32 mer; /* Message Enable */
- u8 res45[12];
- u32 msr; /* Message Status */
- u8 res46[60140];
- u32 eivpr0; /* External IRQ Vector/Priority 0 */
- u8 res47[12];
- u32 eidr0; /* External IRQ Destination 0 */
- u8 res48[12];
- u32 eivpr1; /* External IRQ Vector/Priority 1 */
- u8 res49[12];
- u32 eidr1; /* External IRQ Destination 1 */
- u8 res50[12];
- u32 eivpr2; /* External IRQ Vector/Priority 2 */
- u8 res51[12];
- u32 eidr2; /* External IRQ Destination 2 */
- u8 res52[12];
- u32 eivpr3; /* External IRQ Vector/Priority 3 */
- u8 res53[12];
- u32 eidr3; /* External IRQ Destination 3 */
- u8 res54[12];
- u32 eivpr4; /* External IRQ Vector/Priority 4 */
- u8 res55[12];
- u32 eidr4; /* External IRQ Destination 4 */
- u8 res56[12];
- u32 eivpr5; /* External IRQ Vector/Priority 5 */
- u8 res57[12];
- u32 eidr5; /* External IRQ Destination 5 */
- u8 res58[12];
- u32 eivpr6; /* External IRQ Vector/Priority 6 */
- u8 res59[12];
- u32 eidr6; /* External IRQ Destination 6 */
- u8 res60[12];
- u32 eivpr7; /* External IRQ Vector/Priority 7 */
- u8 res61[12];
- u32 eidr7; /* External IRQ Destination 7 */
- u8 res62[12];
- u32 eivpr8; /* External IRQ Vector/Priority 8 */
- u8 res63[12];
- u32 eidr8; /* External IRQ Destination 8 */
- u8 res64[12];
- u32 eivpr9; /* External IRQ Vector/Priority 9 */
- u8 res65[12];
- u32 eidr9; /* External IRQ Destination 9 */
- u8 res66[12];
- u32 eivpr10; /* External IRQ Vector/Priority 10 */
- u8 res67[12];
- u32 eidr10; /* External IRQ Destination 10 */
- u8 res68[12];
- u32 eivpr11; /* External IRQ Vector/Priority 11 */
- u8 res69[12];
- u32 eidr11; /* External IRQ Destination 11 */
- u8 res70[140];
- u32 iivpr0; /* Internal IRQ Vector/Priority 0 */
- u8 res71[12];
- u32 iidr0; /* Internal IRQ Destination 0 */
- u8 res72[12];
- u32 iivpr1; /* Internal IRQ Vector/Priority 1 */
- u8 res73[12];
- u32 iidr1; /* Internal IRQ Destination 1 */
- u8 res74[12];
- u32 iivpr2; /* Internal IRQ Vector/Priority 2 */
- u8 res75[12];
- u32 iidr2; /* Internal IRQ Destination 2 */
- u8 res76[12];
- u32 iivpr3; /* Internal IRQ Vector/Priority 3 */
- u8 res77[12];
- u32 iidr3; /* Internal IRQ Destination 3 */
- u8 res78[12];
- u32 iivpr4; /* Internal IRQ Vector/Priority 4 */
- u8 res79[12];
- u32 iidr4; /* Internal IRQ Destination 4 */
- u8 res80[12];
- u32 iivpr5; /* Internal IRQ Vector/Priority 5 */
- u8 res81[12];
- u32 iidr5; /* Internal IRQ Destination 5 */
- u8 res82[12];
- u32 iivpr6; /* Internal IRQ Vector/Priority 6 */
- u8 res83[12];
- u32 iidr6; /* Internal IRQ Destination 6 */
- u8 res84[12];
- u32 iivpr7; /* Internal IRQ Vector/Priority 7 */
- u8 res85[12];
- u32 iidr7; /* Internal IRQ Destination 7 */
- u8 res86[12];
- u32 iivpr8; /* Internal IRQ Vector/Priority 8 */
- u8 res87[12];
- u32 iidr8; /* Internal IRQ Destination 8 */
- u8 res88[12];
- u32 iivpr9; /* Internal IRQ Vector/Priority 9 */
- u8 res89[12];
- u32 iidr9; /* Internal IRQ Destination 9 */
- u8 res90[12];
- u32 iivpr10; /* Internal IRQ Vector/Priority 10 */
- u8 res91[12];
- u32 iidr10; /* Internal IRQ Destination 10 */
- u8 res92[12];
- u32 iivpr11; /* Internal IRQ Vector/Priority 11 */
- u8 res93[12];
- u32 iidr11; /* Internal IRQ Destination 11 */
- u8 res94[12];
- u32 iivpr12; /* Internal IRQ Vector/Priority 12 */
- u8 res95[12];
- u32 iidr12; /* Internal IRQ Destination 12 */
- u8 res96[12];
- u32 iivpr13; /* Internal IRQ Vector/Priority 13 */
- u8 res97[12];
- u32 iidr13; /* Internal IRQ Destination 13 */
- u8 res98[12];
- u32 iivpr14; /* Internal IRQ Vector/Priority 14 */
- u8 res99[12];
- u32 iidr14; /* Internal IRQ Destination 14 */
- u8 res100[12];
- u32 iivpr15; /* Internal IRQ Vector/Priority 15 */
- u8 res101[12];
- u32 iidr15; /* Internal IRQ Destination 15 */
- u8 res102[12];
- u32 iivpr16; /* Internal IRQ Vector/Priority 16 */
- u8 res103[12];
- u32 iidr16; /* Internal IRQ Destination 16 */
- u8 res104[12];
- u32 iivpr17; /* Internal IRQ Vector/Priority 17 */
- u8 res105[12];
- u32 iidr17; /* Internal IRQ Destination 17 */
- u8 res106[12];
- u32 iivpr18; /* Internal IRQ Vector/Priority 18 */
- u8 res107[12];
- u32 iidr18; /* Internal IRQ Destination 18 */
- u8 res108[12];
- u32 iivpr19; /* Internal IRQ Vector/Priority 19 */
- u8 res109[12];
- u32 iidr19; /* Internal IRQ Destination 19 */
- u8 res110[12];
- u32 iivpr20; /* Internal IRQ Vector/Priority 20 */
- u8 res111[12];
- u32 iidr20; /* Internal IRQ Destination 20 */
- u8 res112[12];
- u32 iivpr21; /* Internal IRQ Vector/Priority 21 */
- u8 res113[12];
- u32 iidr21; /* Internal IRQ Destination 21 */
- u8 res114[12];
- u32 iivpr22; /* Internal IRQ Vector/Priority 22 */
- u8 res115[12];
- u32 iidr22; /* Internal IRQ Destination 22 */
- u8 res116[12];
- u32 iivpr23; /* Internal IRQ Vector/Priority 23 */
- u8 res117[12];
- u32 iidr23; /* Internal IRQ Destination 23 */
- u8 res118[12];
- u32 iivpr24; /* Internal IRQ Vector/Priority 24 */
- u8 res119[12];
- u32 iidr24; /* Internal IRQ Destination 24 */
- u8 res120[12];
- u32 iivpr25; /* Internal IRQ Vector/Priority 25 */
- u8 res121[12];
- u32 iidr25; /* Internal IRQ Destination 25 */
- u8 res122[12];
- u32 iivpr26; /* Internal IRQ Vector/Priority 26 */
- u8 res123[12];
- u32 iidr26; /* Internal IRQ Destination 26 */
- u8 res124[12];
- u32 iivpr27; /* Internal IRQ Vector/Priority 27 */
- u8 res125[12];
- u32 iidr27; /* Internal IRQ Destination 27 */
- u8 res126[12];
- u32 iivpr28; /* Internal IRQ Vector/Priority 28 */
- u8 res127[12];
- u32 iidr28; /* Internal IRQ Destination 28 */
- u8 res128[12];
- u32 iivpr29; /* Internal IRQ Vector/Priority 29 */
- u8 res129[12];
- u32 iidr29; /* Internal IRQ Destination 29 */
- u8 res130[12];
- u32 iivpr30; /* Internal IRQ Vector/Priority 30 */
- u8 res131[12];
- u32 iidr30; /* Internal IRQ Destination 30 */
- u8 res132[12];
- u32 iivpr31; /* Internal IRQ Vector/Priority 31 */
- u8 res133[12];
- u32 iidr31; /* Internal IRQ Destination 31 */
- u8 res134[4108];
- u32 mivpr0; /* Messaging IRQ Vector/Priority 0 */
- u8 res135[12];
- u32 midr0; /* Messaging IRQ Destination 0 */
- u8 res136[12];
- u32 mivpr1; /* Messaging IRQ Vector/Priority 1 */
- u8 res137[12];
- u32 midr1; /* Messaging IRQ Destination 1 */
- u8 res138[12];
- u32 mivpr2; /* Messaging IRQ Vector/Priority 2 */
- u8 res139[12];
- u32 midr2; /* Messaging IRQ Destination 2 */
- u8 res140[12];
- u32 mivpr3; /* Messaging IRQ Vector/Priority 3 */
- u8 res141[12];
- u32 midr3; /* Messaging IRQ Destination 3 */
- u8 res142[59852];
- u32 ipi0dr0; /* Processor 0 Interprocessor IRQ Dispatch 0 */
- u8 res143[12];
- u32 ipi0dr1; /* Processor 0 Interprocessor IRQ Dispatch 1 */
- u8 res144[12];
- u32 ipi0dr2; /* Processor 0 Interprocessor IRQ Dispatch 2 */
- u8 res145[12];
- u32 ipi0dr3; /* Processor 0 Interprocessor IRQ Dispatch 3 */
- u8 res146[12];
- u32 ctpr0; /* Current Task Priority for Processor 0 */
- u8 res147[12];
- u32 whoami0; /* Who Am I for Processor 0 */
- u8 res148[12];
- u32 iack0; /* IRQ Acknowledge for Processor 0 */
- u8 res149[12];
- u32 eoi0; /* End Of IRQ for Processor 0 */
- u8 res150[130892];
-} ccsr_pic_t;
-
-/* CPM Block */
-#ifndef CONFIG_CPM2
-typedef struct ccsr_cpm {
- u8 res[262144];
-} ccsr_cpm_t;
-#else
-/*
- * DPARM
- * General SIU
- */
-typedef struct ccsr_cpm_siu {
- u8 res1[80];
- u32 smaer;
- u32 smser;
- u32 smevr;
- u8 res2[4];
- u32 lmaer;
- u32 lmser;
- u32 lmevr;
- u8 res3[2964];
-} ccsr_cpm_siu_t;
-
-/* IRQ Controller */
-typedef struct ccsr_cpm_intctl {
- u16 sicr;
- u8 res1[2];
- u32 sivec;
- u32 sipnrh;
- u32 sipnrl;
- u32 siprr;
- u32 scprrh;
- u32 scprrl;
- u32 simrh;
- u32 simrl;
- u32 siexr;
- u8 res2[88];
- u32 sccr;
- u8 res3[124];
-} ccsr_cpm_intctl_t;
-
-/* input/output port */
-typedef struct ccsr_cpm_iop {
- u32 pdira;
- u32 ppara;
- u32 psora;
- u32 podra;
- u32 pdata;
- u8 res1[12];
- u32 pdirb;
- u32 pparb;
- u32 psorb;
- u32 podrb;
- u32 pdatb;
- u8 res2[12];
- u32 pdirc;
- u32 pparc;
- u32 psorc;
- u32 podrc;
- u32 pdatc;
- u8 res3[12];
- u32 pdird;
- u32 ppard;
- u32 psord;
- u32 podrd;
- u32 pdatd;
- u8 res4[12];
-} ccsr_cpm_iop_t;
-
-/* CPM timers */
-typedef struct ccsr_cpm_timer {
- u8 tgcr1;
- u8 res1[3];
- u8 tgcr2;
- u8 res2[11];
- u16 tmr1;
- u16 tmr2;
- u16 trr1;
- u16 trr2;
- u16 tcr1;
- u16 tcr2;
- u16 tcn1;
- u16 tcn2;
- u16 tmr3;
- u16 tmr4;
- u16 trr3;
- u16 trr4;
- u16 tcr3;
- u16 tcr4;
- u16 tcn3;
- u16 tcn4;
- u16 ter1;
- u16 ter2;
- u16 ter3;
- u16 ter4;
- u8 res3[608];
-} ccsr_cpm_timer_t;
-
-/* SDMA */
-typedef struct ccsr_cpm_sdma {
- u8 sdsr;
- u8 res1[3];
- u8 sdmr;
- u8 res2[739];
-} ccsr_cpm_sdma_t;
-
-/* FCC1 */
-typedef struct ccsr_cpm_fcc1 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 ftirr_phy[4];
-} ccsr_cpm_fcc1_t;
-
-/* FCC2 */
-typedef struct ccsr_cpm_fcc2 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 ftirr_phy[4];
-} ccsr_cpm_fcc2_t;
-
-/* FCC3 */
-typedef struct ccsr_cpm_fcc3 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 res[36];
-} ccsr_cpm_fcc3_t;
-
-/* FCC1 extended */
-typedef struct ccsr_cpm_fcc1_ext {
- u32 firper;
- u32 firer;
- u32 firsr_h;
- u32 firsr_l;
- u8 gfemr;
- u8 res[15];
-
-} ccsr_cpm_fcc1_ext_t;
-
-/* FCC2 extended */
-typedef struct ccsr_cpm_fcc2_ext {
- u32 firper;
- u32 firer;
- u32 firsr_h;
- u32 firsr_l;
- u8 gfemr;
- u8 res[31];
-} ccsr_cpm_fcc2_ext_t;
-
-/* FCC3 extended */
-typedef struct ccsr_cpm_fcc3_ext {
- u8 gfemr;
- u8 res[47];
-} ccsr_cpm_fcc3_ext_t;
-
-/* TC layers */
-typedef struct ccsr_cpm_tmp1 {
- u8 res[496];
-} ccsr_cpm_tmp1_t;
-
-/* BRGs:5,6,7,8 */
-typedef struct ccsr_cpm_brg2 {
- u32 brgc5;
- u32 brgc6;
- u32 brgc7;
- u32 brgc8;
- u8 res[608];
-} ccsr_cpm_brg2_t;
-
-/* I2C */
-typedef struct ccsr_cpm_i2c {
- u8 i2mod;
- u8 res1[3];
- u8 i2add;
- u8 res2[3];
- u8 i2brg;
- u8 res3[3];
- u8 i2com;
- u8 res4[3];
- u8 i2cer;
- u8 res5[3];
- u8 i2cmr;
- u8 res6[331];
-} ccsr_cpm_i2c_t;
-
-/* CPM core */
-typedef struct ccsr_cpm_cp {
- u32 cpcr;
- u32 rccr;
- u8 res1[14];
- u16 rter;
- u8 res2[2];
- u16 rtmr;
- u16 rtscr;
- u8 res3[2];
- u32 rtsr;
- u8 res4[12];
-} ccsr_cpm_cp_t;
-
-/* BRGs:1,2,3,4 */
-typedef struct ccsr_cpm_brg1 {
- u32 brgc1;
- u32 brgc2;
- u32 brgc3;
- u32 brgc4;
-} ccsr_cpm_brg1_t;
-
-/* SCC1-SCC4 */
-typedef struct ccsr_cpm_scc {
- u32 gsmrl;
- u32 gsmrh;
- u16 psmr;
- u8 res1[2];
- u16 todr;
- u16 dsr;
- u16 scce;
- u8 res2[2];
- u16 sccm;
- u8 res3;
- u8 sccs;
- u8 res4[8];
-} ccsr_cpm_scc_t;
-
-typedef struct ccsr_cpm_tmp2 {
- u8 res[32];
-} ccsr_cpm_tmp2_t;
-
-/* SPI */
-typedef struct ccsr_cpm_spi {
- u16 spmode;
- u8 res1[4];
- u8 spie;
- u8 res2[3];
- u8 spim;
- u8 res3[2];
- u8 spcom;
- u8 res4[82];
-} ccsr_cpm_spi_t;
-
-/* CPM MUX */
-typedef struct ccsr_cpm_mux {
- u8 cmxsi1cr;
- u8 res1;
- u8 cmxsi2cr;
- u8 res2;
- u32 cmxfcr;
- u32 cmxscr;
- u8 res3[2];
- u16 cmxuar;
- u8 res4[16];
-} ccsr_cpm_mux_t;
-
-/* SI,MCC,etc */
-typedef struct ccsr_cpm_tmp3 {
- u8 res[58592];
-} ccsr_cpm_tmp3_t;
-
-typedef struct ccsr_cpm_iram {
- u32 iram[8192];
- u8 res[98304];
-} ccsr_cpm_iram_t;
-
-typedef struct ccsr_cpm {
- /* Some references are into the unique & known dpram spaces,
- * others are from the generic base.
- */
-#define im_dprambase im_dpram1
- u8 im_dpram1[16*1024];
- u8 res1[16*1024];
- u8 im_dpram2[16*1024];
- u8 res2[16*1024];
- ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
- ccsr_cpm_intctl_t im_cpm_intctl; /* IRQ Controller */
- ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
- ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
- ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
- ccsr_cpm_fcc1_t im_cpm_fcc1;
- ccsr_cpm_fcc2_t im_cpm_fcc2;
- ccsr_cpm_fcc3_t im_cpm_fcc3;
- ccsr_cpm_fcc1_ext_t im_cpm_fcc1_ext;
- ccsr_cpm_fcc2_ext_t im_cpm_fcc2_ext;
- ccsr_cpm_fcc3_ext_t im_cpm_fcc3_ext;
- ccsr_cpm_tmp1_t im_cpm_tmp1;
- ccsr_cpm_brg2_t im_cpm_brg2;
- ccsr_cpm_i2c_t im_cpm_i2c;
- ccsr_cpm_cp_t im_cpm_cp;
- ccsr_cpm_brg1_t im_cpm_brg1;
- ccsr_cpm_scc_t im_cpm_scc[4];
- ccsr_cpm_tmp2_t im_cpm_tmp2;
- ccsr_cpm_spi_t im_cpm_spi;
- ccsr_cpm_mux_t im_cpm_mux;
- ccsr_cpm_tmp3_t im_cpm_tmp3;
- ccsr_cpm_iram_t im_cpm_iram;
-} ccsr_cpm_t;
-#endif
-
-/* RapidIO Registers */
-typedef struct ccsr_rio {
- u32 didcar; /* Device Identity Capability */
- u32 dicar; /* Device Information Capability */
- u32 aidcar; /* Assembly Identity Capability */
- u32 aicar; /* Assembly Information Capability */
- u32 pefcar; /* Processing Element Features Capability */
- u32 spicar; /* Switch Port Information Capability */
- u32 socar; /* Source Operations Capability */
- u32 docar; /* Destination Operations Capability */
- u8 res1[32];
- u32 msr; /* Mailbox Cmd And Status */
- u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */
- u8 res2[4];
- u32 pellccsr; /* Processing Element Logic Layer CCSR */
- u8 res3[12];
- u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */
- u32 bdidcsr; /* Base Device ID Cmd & Status */
- u8 res4[4];
- u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */
- u32 ctcsr; /* Component Tag Cmd & Status */
- u8 res5[144];
- u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */
- u8 res6[28];
- u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */
- u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */
- u8 res7[20];
- u32 pgccsr; /* Port General Cmd & Status */
- u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */
- u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */
- u32 plascsr; /* Port Local Ackid Status Cmd & Status */
- u8 res8[12];
- u32 pescsr; /* Port Error & Status Cmd & Status */
- u32 pccsr; /* Port Control Cmd & Status */
- u8 res9[65184];
- u32 cr; /* Port Control Cmd & Status */
- u8 res10[12];
- u32 pcr; /* Port Configuration */
- u32 peir; /* Port Error Injection */
- u8 res11[3048];
- u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */
- u8 res12[12];
- u32 rowar0; /* RIO Outbound Attrs 0 */
- u8 res13[12];
- u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */
- u8 res14[4];
- u32 rowbar1; /* RIO Outbound Window Base Addr 1 */
- u8 res15[4];
- u32 rowar1; /* RIO Outbound Attrs 1 */
- u8 res16[12];
- u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */
- u8 res17[4];
- u32 rowbar2; /* RIO Outbound Window Base Addr 2 */
- u8 res18[4];
- u32 rowar2; /* RIO Outbound Attrs 2 */
- u8 res19[12];
- u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */
- u8 res20[4];
- u32 rowbar3; /* RIO Outbound Window Base Addr 3 */
- u8 res21[4];
- u32 rowar3; /* RIO Outbound Attrs 3 */
- u8 res22[12];
- u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */
- u8 res23[4];
- u32 rowbar4; /* RIO Outbound Window Base Addr 4 */
- u8 res24[4];
- u32 rowar4; /* RIO Outbound Attrs 4 */
- u8 res25[12];
- u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */
- u8 res26[4];
- u32 rowbar5; /* RIO Outbound Window Base Addr 5 */
- u8 res27[4];
- u32 rowar5; /* RIO Outbound Attrs 5 */
- u8 res28[12];
- u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */
- u8 res29[4];
- u32 rowbar6; /* RIO Outbound Window Base Addr 6 */
- u8 res30[4];
- u32 rowar6; /* RIO Outbound Attrs 6 */
- u8 res31[12];
- u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */
- u8 res32[4];
- u32 rowbar7; /* RIO Outbound Window Base Addr 7 */
- u8 res33[4];
- u32 rowar7; /* RIO Outbound Attrs 7 */
- u8 res34[12];
- u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */
- u8 res35[4];
- u32 rowbar8; /* RIO Outbound Window Base Addr 8 */
- u8 res36[4];
- u32 rowar8; /* RIO Outbound Attrs 8 */
- u8 res37[76];
- u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */
- u8 res38[4];
- u32 riwbar4; /* RIO Inbound Window Base Addr 4 */
- u8 res39[4];
- u32 riwar4; /* RIO Inbound Attrs 4 */
- u8 res40[12];
- u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */
- u8 res41[4];
- u32 riwbar3; /* RIO Inbound Window Base Addr 3 */
- u8 res42[4];
- u32 riwar3; /* RIO Inbound Attrs 3 */
- u8 res43[12];
- u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */
- u8 res44[4];
- u32 riwbar2; /* RIO Inbound Window Base Addr 2 */
- u8 res45[4];
- u32 riwar2; /* RIO Inbound Attrs 2 */
- u8 res46[12];
- u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */
- u8 res47[4];
- u32 riwbar1; /* RIO Inbound Window Base Addr 1 */
- u8 res48[4];
- u32 riwar1; /* RIO Inbound Attrs 1 */
- u8 res49[12];
- u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */
- u8 res50[12];
- u32 riwar0; /* RIO Inbound Attrs 0 */
- u8 res51[12];
- u32 pnfedr; /* Port Notification/Fatal Error Detect */
- u32 pnfedir; /* Port Notification/Fatal Error Detect */
- u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */
- u32 pecr; /* Port Error Control */
- u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */
- u32 pepr1; /* Port Error Packet 1 */
- u32 pepr2; /* Port Error Packet 2 */
- u8 res52[4];
- u32 predr; /* Port Recoverable Error Detect */
- u8 res53[4];
- u32 pertr; /* Port Error Recovery Threshold */
- u32 prtr; /* Port Retry Threshold */
- u8 res54[464];
- u32 omr; /* Outbound Mode */
- u32 osr; /* Outbound Status */
- u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */
- u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */
- u32 eosar; /* Extended Outbound Unit Source Addr */
- u32 osar; /* Outbound Unit Source Addr */
- u32 odpr; /* Outbound Destination Port */
- u32 odatr; /* Outbound Destination Attrs */
- u32 odcr; /* Outbound Doubleword Count */
- u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */
- u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */
- u8 res55[52];
- u32 imr; /* Outbound Mode */
- u32 isr; /* Inbound Status */
- u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */
- u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */
- u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */
- u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */
- u8 res56[1000];
- u32 dmr; /* Doorbell Mode */
- u32 dsr; /* Doorbell Status */
- u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */
- u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */
- u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */
- u32 dqhpar; /* Doorbell Queue Head Ptr Addr */
- u8 res57[104];
- u32 pwmr; /* Port-Write Mode */
- u32 pwsr; /* Port-Write Status */
- u32 epwqbar; /* Extended Port-Write Queue Base Addr */
- u32 pwqbar; /* Port-Write Queue Base Addr */
- u8 res58[60176];
-} ccsr_rio_t;
-
-/* Quick Engine Block Pin Muxing Registers */
-typedef struct par_io {
- u32 cpodr;
- u32 cpdat;
- u32 cpdir1;
- u32 cpdir2;
- u32 cppar1;
- u32 cppar2;
- u8 res[8];
-} par_io_t;
-
-#ifdef CONFIG_SYS_FSL_CPC
-/*
- * Define a single offset that is the start of all the CPC register
- * blocks - if there is more than one CPC, we expect these to be
- * contiguous 4k regions
- */
-
-typedef struct cpc_corenet {
- u32 cpccsr0; /* Config/status reg */
- u32 res1;
- u32 cpccfg0; /* Configuration register */
- u32 res2;
- u32 cpcewcr0; /* External Write reg 0 */
- u32 cpcewabr0; /* External write base reg 0 */
- u32 res3[2];
- u32 cpcewcr1; /* External Write reg 1 */
- u32 cpcewabr1; /* External write base reg 1 */
- u32 res4[54];
- u32 cpcsrcr1; /* SRAM control reg 1 */
- u32 cpcsrcr0; /* SRAM control reg 0 */
- u32 res5[62];
- struct {
- u32 id; /* partition ID */
- u32 res;
- u32 alloc; /* partition allocation */
- u32 way; /* partition way */
- } partition_regs[16];
- u32 res6[704];
- u32 cpcerrinjhi; /* Error injection high */
- u32 cpcerrinjlo; /* Error injection lo */
- u32 cpcerrinjctl; /* Error injection control */
- u32 res7[5];
- u32 cpccaptdatahi; /* capture data high */
- u32 cpccaptdatalo; /* capture data low */
- u32 cpcaptecc; /* capture ECC */
- u32 res8[5];
- u32 cpcerrdet; /* error detect */
- u32 cpcerrdis; /* error disable */
- u32 cpcerrinten; /* errir interrupt enable */
- u32 cpcerrattr; /* error attribute */
- u32 cpcerreaddr; /* error extended address */
- u32 cpcerraddr; /* error address */
- u32 cpcerrctl; /* error control */
- u32 res9[105]; /* pad out to 4k */
-} cpc_corenet_t;
-
-#define CPC_CSR0_CE 0x80000000 /* Cache Enable */
-#define CPC_CSR0_PE 0x40000000 /* Enable ECC */
-#define CPC_CSR0_FI 0x00200000 /* Cache Flash Invalidate */
-#define CPC_CSR0_WT 0x00080000 /* Write-through mode */
-#define CPC_CSR0_FL 0x00000800 /* Hardware cache flush */
-#define CPC_CSR0_LFC 0x00000400 /* Cache Lock Flash Clear */
-#define CPC_CFG0_SZ_MASK 0x00003fff
-#define CPC_CFG0_SZ_K(x) ((x & CPC_CFG0_SZ_MASK) << 6)
-#define CPC_CFG0_NUM_WAYS(x) (((x >> 14) & 0x1f) + 1)
-#define CPC_CFG0_LINE_SZ(x) ((((x >> 23) & 0x3) + 1) * 32)
-#define CPC_SRCR1_SRBARU_MASK 0x0000ffff
-#define CPC_SRCR1_SRBARU(x) (((unsigned long long)x >> 32) \
- & CPC_SRCR1_SRBARU_MASK)
-#define CPC_SRCR0_SRBARL_MASK 0xffff8000
-#define CPC_SRCR0_SRBARL(x) (x & CPC_SRCR0_SRBARL_MASK)
-#define CPC_SRCR0_INTLVEN 0x00000100
-#define CPC_SRCR0_SRAMSZ_1_WAY 0x00000000
-#define CPC_SRCR0_SRAMSZ_2_WAY 0x00000002
-#define CPC_SRCR0_SRAMSZ_4_WAY 0x00000004
-#define CPC_SRCR0_SRAMSZ_8_WAY 0x00000006
-#define CPC_SRCR0_SRAMSZ_16_WAY 0x00000008
-#define CPC_SRCR0_SRAMSZ_32_WAY 0x0000000a
-#define CPC_SRCR0_SRAMEN 0x00000001
-#define CPC_ERRDIS_TMHITDIS 0x00000080 /* multi-way hit disable */
-#endif /* CONFIG_SYS_FSL_CPC */
-
-/* Global Utilities Block */
-#ifdef CONFIG_FSL_CORENET
-typedef struct ccsr_gur {
- u32 porsr1; /* POR status */
- u8 res1[28];
- u32 gpporcr1; /* General-purpose POR configuration */
- u8 res2[12];
- u32 gpiocr; /* GPIO control */
- u8 res3[12];
- u32 gpoutdr; /* General-purpose output data */
- u8 res4[12];
- u32 gpindr; /* General-purpose input data */
- u8 res5[12];
- u32 pmuxcr; /* Alt function signal multiplex control */
- u8 res6[12];
- u32 devdisr; /* Device disable control */
-#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
-#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
-#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
-#define FSL_CORENET_DEVDISR_RMU 0x08000000
-#define FSL_CORENET_DEVDISR_SRIO1 0x04000000
-#define FSL_CORENET_DEVDISR_SRIO2 0x02000000
-#define FSL_CORENET_DEVDISR_DMA1 0x00400000
-#define FSL_CORENET_DEVDISR_DMA2 0x00200000
-#define FSL_CORENET_DEVDISR_DDR1 0x00100000
-#define FSL_CORENET_DEVDISR_DDR2 0x00080000
-#define FSL_CORENET_DEVDISR_DBG 0x00010000
-#define FSL_CORENET_DEVDISR_NAL 0x00008000
-#define FSL_CORENET_DEVDISR_ELBC 0x00001000
-#define FSL_CORENET_DEVDISR_USB1 0x00000800
-#define FSL_CORENET_DEVDISR_USB2 0x00000400
-#define FSL_CORENET_DEVDISR_ESDHC 0x00000100
-#define FSL_CORENET_DEVDISR_GPIO 0x00000080
-#define FSL_CORENET_DEVDISR_ESPI 0x00000040
-#define FSL_CORENET_DEVDISR_I2C1 0x00000020
-#define FSL_CORENET_DEVDISR_I2C2 0x00000010
-#define FSL_CORENET_DEVDISR_DUART1 0x00000002
-#define FSL_CORENET_DEVDISR_DUART2 0x00000001
- u8 res7[12];
- u32 powmgtcsr; /* Power management status & control */
- u8 res8[12];
- u32 coredisru; /* uppper portion for support of 64 cores */
- u32 coredisrl; /* lower portion for support of 64 cores */
- u8 res9[8];
- u32 pvr; /* Processor version */
- u32 svr; /* System version */
- u8 res10[8];
- u32 rstcr; /* Reset control */
- u32 rstrqpblsr; /* Reset request preboot loader status */
- u8 res11[8];
- u32 rstrqmr1; /* Reset request mask */
- u8 res12[4];
- u32 rstrqsr1; /* Reset request status */
- u8 res13[4];
- u8 res14[4];
- u32 rstrqwdtmrl; /* Reset request WDT mask */
- u8 res15[4];
- u32 rstrqwdtsrl; /* Reset request WDT status */
- u8 res16[4];
- u32 brrl; /* Boot release */
- u8 res17[24];
- u32 rcwsr[16]; /* Reset control word status */
-#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
-#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00008000
-#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 15
-#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
-#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
-#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
- u8 res18[192];
- u32 scratchrw[4]; /* Scratch Read/Write */
- u8 res19[240];
- u32 scratchw1r[4]; /* Scratch Read (Write once) */
- u8 res20[240];
- u32 scrtsr[8]; /* Core reset status */
- u8 res21[224];
- u32 pex1liodnr; /* PCI Express 1 LIODN */
- u32 pex2liodnr; /* PCI Express 2 LIODN */
- u32 pex3liodnr; /* PCI Express 3 LIODN */
- u32 pex4liodnr; /* PCI Express 4 LIODN */
- u32 rio1liodnr; /* RIO 1 LIODN */
- u32 rio2liodnr; /* RIO 2 LIODN */
- u32 rio3liodnr; /* RIO 3 LIODN */
- u32 rio4liodnr; /* RIO 4 LIODN */
- u32 usb1liodnr; /* USB 1 LIODN */
- u32 usb2liodnr; /* USB 2 LIODN */
- u32 usb3liodnr; /* USB 3 LIODN */
- u32 usb4liodnr; /* USB 4 LIODN */
- u32 sdmmc1liodnr; /* SD/MMC 1 LIODN */
- u32 sdmmc2liodnr; /* SD/MMC 2 LIODN */
- u32 sdmmc3liodnr; /* SD/MMC 3 LIODN */
- u32 sdmmc4liodnr; /* SD/MMC 4 LIODN */
- u32 rmuliodnr; /* RIO Message Unit LIODN */
- u32 rduliodnr; /* RIO Doorbell Unit LIODN */
- u32 rpwuliodnr; /* RIO Port Write Unit LIODN */
- u8 res22[52];
- u32 dma1liodnr; /* DMA 1 LIODN */
- u32 dma2liodnr; /* DMA 2 LIODN */
- u32 dma3liodnr; /* DMA 3 LIODN */
- u32 dma4liodnr; /* DMA 4 LIODN */
- u8 res23[48];
- u8 res24[64];
- u32 pblsr; /* Preboot loader status */
- u32 pamubypenr; /* PAMU bypass enable */
- u32 dmacr1; /* DMA control */
- u8 res25[4];
- u32 gensr1; /* General status */
- u8 res26[12];
- u32 gencr1; /* General control */
- u8 res27[12];
- u8 res28[4];
- u32 cgensrl; /* Core general status */
- u8 res29[8];
- u8 res30[4];
- u32 cgencrl; /* Core general control */
- u8 res31[184];
- u32 sriopstecr; /* SRIO prescaler timer enable control */
- u8 res32[2300];
-} ccsr_gur_t;
-
-typedef struct ccsr_clk {
- u32 clkc0csr; /* Core 0 Clock control/status */
- u8 res1[0x1c];
- u32 clkc1csr; /* Core 1 Clock control/status */
- u8 res2[0x1c];
- u32 clkc2csr; /* Core 2 Clock control/status */
- u8 res3[0x1c];
- u32 clkc3csr; /* Core 3 Clock control/status */
- u8 res4[0x1c];
- u32 clkc4csr; /* Core 4 Clock control/status */
- u8 res5[0x1c];
- u32 clkc5csr; /* Core 5 Clock control/status */
- u8 res6[0x1c];
- u32 clkc6csr; /* Core 6 Clock control/status */
- u8 res7[0x1c];
- u32 clkc7csr; /* Core 7 Clock control/status */
- u8 res8[0x71c];
- u32 pllc1gsr; /* Cluster PLL 1 General Status */
- u8 res10[0x1c];
- u32 pllc2gsr; /* Cluster PLL 2 General Status */
- u8 res11[0x1c];
- u32 pllc3gsr; /* Cluster PLL 3 General Status */
- u8 res12[0x1c];
- u32 pllc4gsr; /* Cluster PLL 4 General Status */
- u8 res13[0x39c];
- u32 pllpgsr; /* Platform PLL General Status */
- u8 res14[0x1c];
- u32 plldgsr; /* DDR PLL General Status */
- u8 res15[0x3dc];
-} ccsr_clk_t;
-
-typedef struct ccsr_rcpm {
- u8 res1[4];
- u32 cdozsrl; /* Core Doze Status */
- u8 res2[4];
- u32 cdozcrl; /* Core Doze Control */
- u8 res3[4];
- u32 cnapsrl; /* Core Nap Status */
- u8 res4[4];
- u32 cnapcrl; /* Core Nap Control */
- u8 res5[4];
- u32 cdozpsrl; /* Core Doze Previous Status */
- u8 res6[4];
- u32 cdozpcrl; /* Core Doze Previous Control */
- u8 res7[4];
- u32 cwaitsrl; /* Core Wait Status */
- u8 res8[8];
- u32 powmgtcsr; /* Power Mangement Control & Status */
- u8 res9[12];
- u32 ippdexpcr0; /* IP Powerdown Exception Control 0 */
- u8 res10[12];
- u8 res11[4];
- u32 cpmimrl; /* Core PM IRQ Masking */
- u8 res12[4];
- u32 cpmcimrl; /* Core PM Critical IRQ Masking */
- u8 res13[4];
- u32 cpmmcimrl; /* Core PM Machine Check IRQ Masking */
- u8 res14[4];
- u32 cpmnmimrl; /* Core PM NMI Masking */
- u8 res15[4];
- u32 ctbenrl; /* Core Time Base Enable */
- u8 res16[4];
- u32 ctbclkselrl; /* Core Time Base Clock Select */
- u8 res17[4];
- u32 ctbhltcrl; /* Core Time Base Halt Control */
- u8 res18[0xf68];
-} ccsr_rcpm_t;
-
-#else
-typedef struct ccsr_gur {
- u32 porpllsr; /* POR PLL ratio status */
-#ifdef CONFIG_MPC8536
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
-#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
-#else
-#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
-#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 9
-#endif
-#define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000
-#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25
-#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e
-#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
- u32 porbmsr; /* POR boot mode status */
-#define MPC85xx_PORBMSR_HA 0x00070000
-#define MPC85xx_PORBMSR_HA_SHIFT 16
- u32 porimpscr; /* POR I/O impedance status & control */
- u32 pordevsr; /* POR I/O device status regsiter */
-#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
-#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
-#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
-#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
-#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
-#define MPC85xx_PORDEVSR_PCI1 0x00800000
-#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
-#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
-#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
-#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
-#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
-#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
-#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
-#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
-#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
-#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
- u32 pordbgmsr; /* POR debug mode status */
- u32 pordevsr2; /* POR I/O device status 2 */
-/* The 8544 RM says this is bit 26, but it's really bit 24 */
-#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
- u8 res1[8];
- u32 gpporcr; /* General-purpose POR configuration */
- u8 res2[12];
- u32 gpiocr; /* GPIO control */
- u8 res3[12];
-#if defined(CONFIG_MPC8569)
- u32 plppar1; /* Platform port pin assignment 1 */
- u32 plppar2; /* Platform port pin assignment 2 */
- u32 plpdir1; /* Platform port pin direction 1 */
- u32 plpdir2; /* Platform port pin direction 2 */
-#else
- u32 gpoutdr; /* General-purpose output data */
- u8 res4[12];
-#endif
- u32 gpindr; /* General-purpose input data */
- u8 res5[12];
- u32 pmuxcr; /* Alt. function signal multiplex control */
-#define MPC85xx_PMUXCR_SD_DATA 0x80000000
-#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
-#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
- u8 res6[12];
- u32 devdisr; /* Device disable control */
-#define MPC85xx_DEVDISR_PCI1 0x80000000
-#define MPC85xx_DEVDISR_PCI2 0x40000000
-#define MPC85xx_DEVDISR_PCIE 0x20000000
-#define MPC85xx_DEVDISR_LBC 0x08000000
-#define MPC85xx_DEVDISR_PCIE2 0x04000000
-#define MPC85xx_DEVDISR_PCIE3 0x02000000
-#define MPC85xx_DEVDISR_SEC 0x01000000
-#define MPC85xx_DEVDISR_SRIO 0x00080000
-#define MPC85xx_DEVDISR_RMSG 0x00040000
-#define MPC85xx_DEVDISR_DDR 0x00010000
-#define MPC85xx_DEVDISR_CPU 0x00008000
-#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
-#define MPC85xx_DEVDISR_TB 0x00004000
-#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
-#define MPC85xx_DEVDISR_CPU1 0x00002000
-#define MPC85xx_DEVDISR_TB1 0x00001000
-#define MPC85xx_DEVDISR_DMA 0x00000400
-#define MPC85xx_DEVDISR_TSEC1 0x00000080
-#define MPC85xx_DEVDISR_TSEC2 0x00000040
-#define MPC85xx_DEVDISR_TSEC3 0x00000020
-#define MPC85xx_DEVDISR_TSEC4 0x00000010
-#define MPC85xx_DEVDISR_I2C 0x00000004
-#define MPC85xx_DEVDISR_DUART 0x00000002
- u8 res7[12];
- u32 powmgtcsr; /* Power management status & control */
- u8 res8[12];
- u32 mcpsumr; /* Machine check summary */
- u8 res9[12];
- u32 pvr; /* Processor version */
- u32 svr; /* System version */
- u8 res10a[8];
- u32 rstcr; /* Reset control */
-#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
- u8 res10b[76];
- par_io_t qe_par_io[7];
- u8 res10c[3136];
-#else
- u8 res10b[3404];
-#endif
- u32 clkocr; /* Clock out select */
- u8 res11[12];
- u32 ddrdllcr; /* DDR DLL control */
- u8 res12[12];
- u32 lbcdllcr; /* LBC DLL control */
- u8 res13[248];
- u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
- u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
- u32 ddrioovcr; /* DDR IO Override Control */
- u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
- u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
- u8 res15[61648];
-} ccsr_gur_t;
-#endif
-
-typedef struct serdes_corenet {
- struct {
- u32 rstctl; /* Reset Control Register */
-#define SRDS_RSTCTL_RST 0x80000000
-#define SRDS_RSTCTL_RSTDONE 0x40000000
-#define SRDS_RSTCTL_RSTERR 0x20000000
- u32 pllcr0; /* PLL Control Register 0 */
- u32 pllcr1; /* PLL Control Register 1 */
-#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
- u32 res[5];
- } bank[3];
- u32 res1[12];
- u32 srdstcalcr; /* TX Calibration Control */
- u32 res2[3];
- u32 srdsrcalcr; /* RX Calibration Control */
- u32 res3[3];
- u32 srdsgr0; /* General Register 0 */
- u32 res4[11];
- u32 srdspccr0; /* Protocol Converter Config 0 */
- u32 srdspccr1; /* Protocol Converter Config 1 */
- u32 srdspccr2; /* Protocol Converter Config 2 */
-#define SRDS_PCCR2_RST_XGMII1 0x00800000
-#define SRDS_PCCR2_RST_XGMII2 0x00400000
- u32 res5[197];
- struct {
- u32 gcr0; /* General Control Register 0 */
-#define SRDS_GCR0_RRST 0x00400000
-#define SRDS_GCR0_1STLANE 0x00010000
- u32 gcr1; /* General Control Register 1 */
-#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
-#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
-#define SRDS_GCR1_REIDL_CTL_SRIO 0x00000000
-#define SRDS_GCR1_REIDL_CTL_SGMII 0x00040000
-#define SRDS_GCR1_OPAD_CTL 0x04000000
- u32 res1[4];
- u32 tecr0; /* TX Equalization Control Reg 0 */
-#define SRDS_TECR0_TEQ_TYPE_MASK 0x30000000
-#define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000
- u32 res3;
- u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */
- u32 res4[7];
- } lane[24];
- u32 res6[384];
-} serdes_corenet_t;
-
-enum {
- FSL_SRDS_B1_LANE_A = 0,
- FSL_SRDS_B1_LANE_B = 1,
- FSL_SRDS_B1_LANE_C = 2,
- FSL_SRDS_B1_LANE_D = 3,
- FSL_SRDS_B1_LANE_E = 4,
- FSL_SRDS_B1_LANE_F = 5,
- FSL_SRDS_B1_LANE_G = 6,
- FSL_SRDS_B1_LANE_H = 7,
- FSL_SRDS_B1_LANE_I = 8,
- FSL_SRDS_B1_LANE_J = 9,
- FSL_SRDS_B2_LANE_A = 16,
- FSL_SRDS_B2_LANE_B = 17,
- FSL_SRDS_B2_LANE_C = 18,
- FSL_SRDS_B2_LANE_D = 19,
- FSL_SRDS_B3_LANE_A = 20,
- FSL_SRDS_B3_LANE_B = 21,
- FSL_SRDS_B3_LANE_C = 22,
- FSL_SRDS_B3_LANE_D = 23,
-};
-
-#ifdef CONFIG_FSL_CORENET
-#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
-#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
-#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
-#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
-#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
-#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x100000
-#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000
-#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
-#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
-#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000
-#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000
-#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000
-#else
-#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
-#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000
-#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000
-#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000
-#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000
-#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000
-#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000
-#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000
-#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
-#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
-#ifdef CONFIG_TSECV2
-#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
-#else
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#endif
-#define CONFIG_SYS_MDIO1_OFFSET 0x24000
-#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
-#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
-#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
-#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
-#endif
-
-#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
-#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
-
-#define CONFIG_SYS_FSL_CPC_ADDR \
- (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
-#define CONFIG_SYS_MPC85xx_GUTS_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_CCM_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_CLK_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
-#define CONFIG_SYS_MPC85xx_ECM_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_LBC_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
-#define CONFIG_SYS_MPC85xx_ESPI_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
-#define CONFIG_SYS_MPC85xx_PCIX_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
-#define CONFIG_SYS_MPC85xx_PCIX2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
-#define CONFIG_SYS_MPC85xx_GPIO_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET)
-#define CONFIG_SYS_MPC85xx_SATA1_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
-#define CONFIG_SYS_MPC85xx_SATA2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
-#define CONFIG_SYS_MPC85xx_L2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DMA_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
-#define CONFIG_SYS_MPC85xx_ESDHC_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
-#define CONFIG_SYS_MPC85xx_PIC_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
-#define CONFIG_SYS_MPC85xx_CPM_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
-#define CONFIG_SYS_MPC85xx_SERDES1_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
-#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
-#define CONFIG_SYS_MPC85xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
-
-#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
-
-#endif /*__IMMAP_85xx__*/
+++ /dev/null
-/*
- * MPC86xx Internal Memory Map
- *
- * Copyright 2004 Freescale Semiconductor
- * Jeff Brown (Jeffrey@freescale.com)
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- */
-
-#ifndef __IMMAP_86xx__
-#define __IMMAP_86xx__
-
-#include <asm/types.h>
-#include <asm/fsl_dma.h>
-#include <asm/fsl_i2c.h>
-
-/* Local-Access Registers and MCM Registers(0x0000-0x2000) */
-typedef struct ccsr_local_mcm {
- uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */
- char res1[4];
- uint altcbar; /* 0x8 - Alternate Configuration Base Address Register */
- char res2[4];
- uint altcar; /* 0x10 - Alternate Configuration Attribute Register */
- char res3[12];
- uint bptr; /* 0x20 - Boot Page Translation Register */
- char res4[3044];
- uint lawbar0; /* 0xc08 - Local Access Window 0 Base Address Register */
- char res5[4];
- uint lawar0; /* 0xc10 - Local Access Window 0 Attributes Register */
- char res6[20];
- uint lawbar1; /* 0xc28 - Local Access Window 1 Base Address Register */
- char res7[4];
- uint lawar1; /* 0xc30 - Local Access Window 1 Attributes Register */
- char res8[20];
- uint lawbar2; /* 0xc48 - Local Access Window 2 Base Address Register */
- char res9[4];
- uint lawar2; /* 0xc50 - Local Access Window 2 Attributes Register */
- char res10[20];
- uint lawbar3; /* 0xc68 - Local Access Window 3 Base Address Register */
- char res11[4];
- uint lawar3; /* 0xc70 - Local Access Window 3 Attributes Register */
- char res12[20];
- uint lawbar4; /* 0xc88 - Local Access Window 4 Base Address Register */
- char res13[4];
- uint lawar4; /* 0xc90 - Local Access Window 4 Attributes Register */
- char res14[20];
- uint lawbar5; /* 0xca8 - Local Access Window 5 Base Address Register */
- char res15[4];
- uint lawar5; /* 0xcb0 - Local Access Window 5 Attributes Register */
- char res16[20];
- uint lawbar6; /* 0xcc8 - Local Access Window 6 Base Address Register */
- char res17[4];
- uint lawar6; /* 0xcd0 - Local Access Window 6 Attributes Register */
- char res18[20];
- uint lawbar7; /* 0xce8 - Local Access Window 7 Base Address Register */
- char res19[4];
- uint lawar7; /* 0xcf0 - Local Access Window 7 Attributes Register */
- char res20[20];
- uint lawbar8; /* 0xd08 - Local Access Window 8 Base Address Register */
- char res21[4];
- uint lawar8; /* 0xd10 - Local Access Window 8 Attributes Register */
- char res22[20];
- uint lawbar9; /* 0xd28 - Local Access Window 9 Base Address Register */
- char res23[4];
- uint lawar9; /* 0xd30 - Local Access Window 9 Attributes Register */
- char res24[716];
- uint abcr; /* 0x1000 - MCM CCB Address Configuration Register */
- char res25[4];
- uint dbcr; /* 0x1008 - MCM MPX data bus Configuration Register */
- char res26[4];
- uint pcr; /* 0x1010 - MCM CCB Port Configuration Register */
- char res27[44];
- uint hpmr0; /* 0x1040 - MCM HPM Threshold Count Register 0 */
- uint hpmr1; /* 0x1044 - MCM HPM Threshold Count Register 1 */
- uint hpmr2; /* 0x1048 - MCM HPM Threshold Count Register 2 */
- uint hpmr3; /* 0x104c - MCM HPM Threshold Count Register 3 */
- char res28[16];
- uint hpmr4; /* 0x1060 - MCM HPM Threshold Count Register 4 */
- uint hpmr5; /* 0x1064 - MCM HPM Threshold Count Register 5 */
- uint hpmccr; /* 0x1068 - MCM HPM Cycle Count Register */
- char res29[3476];
- uint edr; /* 0x1e00 - MCM Error Detect Register */
- char res30[4];
- uint eer; /* 0x1e08 - MCM Error Enable Register */
- uint eatr; /* 0x1e0c - MCM Error Attributes Capture Register */
- uint eladr; /* 0x1e10 - MCM Error Low Address Capture Register */
- uint ehadr; /* 0x1e14 - MCM Error High Address Capture Register */
- char res31[488];
-} ccsr_local_mcm_t;
-
-/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */
-
-typedef struct ccsr_ddr {
- uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */
- char res1[4];
- uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */
- char res2[4];
- uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */
- char res3[4];
- uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */
- char res4[4];
- uint cs4_bnds; /* 0x2020 - DDR Chip Select 4 Memory Bounds */
- char res5[4];
- uint cs5_bnds; /* 0x2028 - DDR Chip Select 5 Memory Bounds */
- char res6[84];
- uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */
- uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */
- uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */
- uint cs3_config; /* 0x208c - DDR Chip Select Configuration */
- uint cs4_config; /* 0x2090 - DDR Chip Select Configuration */
- uint cs5_config; /* 0x2094 - DDR Chip Select Configuration */
- char res7[104];
- uint timing_cfg_3; /* 0x2100 - DDR SDRAM Timing Configuration Register 3 */
- uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
- uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
- uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */
- uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration 1 */
- uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */
- uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration 1 */
- uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */
- uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */
- uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */
- uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */
- char res8[4];
- uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */
- char res9[12];
- uint sdram_ocd_cntl; /* 0x2140 - DDR SDRAM OCD Control */
- uint sdram_ocd_status; /* 0x2144 - DDR SDRAM OCD Status */
- uint init_addr; /* 0x2148 - DDR training initialzation address */
- uint init_ext_addr; /* 0x214C - DDR training initialzation extended address */
- char res10[2728];
- uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */
- uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */
- char res11[512];
- uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
- uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
- uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
- char res12[20];
- uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */
- uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */
- uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */
- char res13[20];
- uint err_detect; /* 0x2e40 - DDR Memory Error Detect */
- uint err_disable; /* 0x2e44 - DDR Memory Error Disable */
- uint err_int_en; /* 0x2e48 - DDR Memory Error Interrupt Enable */
- uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */
- uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */
- uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */
- uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */
- char res14[164];
- uint debug_1; /* 0x2f00 */
- uint debug_2;
- uint debug_3;
- uint debug_4;
- uint debug_5;
- char res15[236];
-} ccsr_ddr_t;
-
-
-/* Daul I2C Registers(0x3000-0x4000) */
-typedef struct ccsr_i2c {
- struct fsl_i2c i2c[2];
- u8 res[4096 - 2 * sizeof(struct fsl_i2c)];
-} ccsr_i2c_t;
-
-/* DUART Registers(0x4000-0x5000) */
-typedef struct ccsr_duart {
- char res1[1280];
- u_char urbr1_uthr1_udlb1;/* 0x4500 - URBR1, UTHR1, UDLB1 with the same address offset of 0x04500 */
- u_char uier1_udmb1; /* 0x4501 - UIER1, UDMB1 with the same address offset of 0x04501 */
- u_char uiir1_ufcr1_uafr1;/* 0x4502 - UIIR1, UFCR1, UAFR1 with the same address offset of 0x04502 */
- u_char ulcr1; /* 0x4503 - UART1 Line Control Register */
- u_char umcr1; /* 0x4504 - UART1 Modem Control Register */
- u_char ulsr1; /* 0x4505 - UART1 Line Status Register */
- u_char umsr1; /* 0x4506 - UART1 Modem Status Register */
- u_char uscr1; /* 0x4507 - UART1 Scratch Register */
- char res2[8];
- u_char udsr1; /* 0x4510 - UART1 DMA Status Register */
- char res3[239];
- u_char urbr2_uthr2_udlb2;/* 0x4600 - URBR2, UTHR2, UDLB2 with the same address offset of 0x04600 */
- u_char uier2_udmb2; /* 0x4601 - UIER2, UDMB2 with the same address offset of 0x04601 */
- u_char uiir2_ufcr2_uafr2;/* 0x4602 - UIIR2, UFCR2, UAFR2 with the same address offset of 0x04602 */
- u_char ulcr2; /* 0x4603 - UART2 Line Control Register */
- u_char umcr2; /* 0x4604 - UART2 Modem Control Register */
- u_char ulsr2; /* 0x4605 - UART2 Line Status Register */
- u_char umsr2; /* 0x4606 - UART2 Modem Status Register */
- u_char uscr2; /* 0x4607 - UART2 Scratch Register */
- char res4[8];
- u_char udsr2; /* 0x4610 - UART2 DMA Status Register */
- char res5[2543];
-} ccsr_duart_t;
-
-
-/* Local Bus Controller Registers(0x5000-0x6000) */
-typedef struct ccsr_lbc {
- uint br0; /* 0x5000 - LBC Base Register 0 */
- uint or0; /* 0x5004 - LBC Options Register 0 */
- uint br1; /* 0x5008 - LBC Base Register 1 */
- uint or1; /* 0x500c - LBC Options Register 1 */
- uint br2; /* 0x5010 - LBC Base Register 2 */
- uint or2; /* 0x5014 - LBC Options Register 2 */
- uint br3; /* 0x5018 - LBC Base Register 3 */
- uint or3; /* 0x501c - LBC Options Register 3 */
- uint br4; /* 0x5020 - LBC Base Register 4 */
- uint or4; /* 0x5024 - LBC Options Register 4 */
- uint br5; /* 0x5028 - LBC Base Register 5 */
- uint or5; /* 0x502c - LBC Options Register 5 */
- uint br6; /* 0x5030 - LBC Base Register 6 */
- uint or6; /* 0x5034 - LBC Options Register 6 */
- uint br7; /* 0x5038 - LBC Base Register 7 */
- uint or7; /* 0x503c - LBC Options Register 7 */
- char res1[40];
- uint mar; /* 0x5068 - LBC UPM Address Register */
- char res2[4];
- uint mamr; /* 0x5070 - LBC UPMA Mode Register */
- uint mbmr; /* 0x5074 - LBC UPMB Mode Register */
- uint mcmr; /* 0x5078 - LBC UPMC Mode Register */
- char res3[8];
- uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
- uint mdr; /* 0x5088 - LBC UPM Data Register */
- char res4[8];
- uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */
- char res5[8];
- uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */
- uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */
- char res6[8];
- uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */
- uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */
- uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */
- uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */
- uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */
- char res7[12];
- uint lbcr; /* 0x50d0 - LBC Configuration Register */
- uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */
- char res8[3880];
-} ccsr_lbc_t;
-
-/* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
-typedef struct ccsr_pex {
- uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */
- uint cfg_data; /* 0x8004 - PEX Configuration Data Register */
- char res1[4];
- uint out_comp_to; /* 0x800C - PEX Outbound Completion Timeout Register */
- char res2[16];
- uint pme_msg_det; /* 0x8020 - PEX PME & message detect register */
- uint pme_msg_int_en; /* 0x8024 - PEX PME & message interrupt enable register */
- uint pme_msg_dis; /* 0x8028 - PEX PME & message disable register */
- uint pm_command; /* 0x802c - PEX PM Command register */
- char res3[3016];
- uint block_rev1; /* 0x8bf8 - PEX Block Revision register 1 */
- uint block_rev2; /* 0x8bfc - PEX Block Revision register 2 */
- uint potar0; /* 0x8c00 - PEX Outbound Transaction Address Register 0 */
- uint potear0; /* 0x8c04 - PEX Outbound Translation Extended Address Register 0 */
- char res4[8];
- uint powar0; /* 0x8c10 - PEX Outbound Window Attributes Register 0 */
- char res5[12];
- uint potar1; /* 0x8c20 - PEX Outbound Transaction Address Register 1 */
- uint potear1; /* 0x8c24 - PEX Outbound Translation Extended Address Register 1 */
- uint powbar1; /* 0x8c28 - PEX Outbound Window Base Address Register 1 */
- char res6[4];
- uint powar1; /* 0x8c30 - PEX Outbound Window Attributes Register 1 */
- char res7[12];
- uint potar2; /* 0x8c40 - PEX Outbound Transaction Address Register 2 */
- uint potear2; /* 0x8c44 - PEX Outbound Translation Extended Address Register 2 */
- uint powbar2; /* 0x8c48 - PEX Outbound Window Base Address Register 2 */
- char res8[4];
- uint powar2; /* 0x8c50 - PEX Outbound Window Attributes Register 2 */
- char res9[12];
- uint potar3; /* 0x8c60 - PEX Outbound Transaction Address Register 3 */
- uint potear3; /* 0x8c64 - PEX Outbound Translation Extended Address Register 3 */
- uint powbar3; /* 0x8c68 - PEX Outbound Window Base Address Register 3 */
- char res10[4];
- uint powar3; /* 0x8c70 - PEX Outbound Window Attributes Register 3 */
- char res11[12];
- uint potar4; /* 0x8c80 - PEX Outbound Transaction Address Register 4 */
- uint potear4; /* 0x8c84 - PEX Outbound Translation Extended Address Register 4 */
- uint powbar4; /* 0x8c88 - PEX Outbound Window Base Address Register 4 */
- char res12[4];
- uint powar4; /* 0x8c90 - PEX Outbound Window Attributes Register 4 */
- char res13[12];
- char res14[256];
- uint pitar3; /* 0x8da0 - PEX Inbound Translation Address Register 3 */
- char res15[4];
- uint piwbar3; /* 0x8da8 - PEX Inbound Window Base Address Register 3 */
- uint piwbear3; /* 0x8dac - PEX Inbound Window Base Extended Address Register 3 */
- uint piwar3; /* 0x8db0 - PEX Inbound Window Attributes Register 3 */
- char res16[12];
- uint pitar2; /* 0x8dc0 - PEX Inbound Translation Address Register 2 */
- char res17[4];
- uint piwbar2; /* 0x8dc8 - PEX Inbound Window Base Address Register 2 */
- uint piwbear2; /* 0x8dcc - PEX Inbound Window Base Extended Address Register 2 */
- uint piwar2; /* 0x8dd0 - PEX Inbound Window Attributes Register 2 */
- char res18[12];
- uint pitar1; /* 0x8de0 - PEX Inbound Translation Address Register 1 */
- char res19[4];
- uint piwbar1; /* 0x8de8 - PEX Inbound Window Base Address Register 1 */
- uint piwbear1;
- uint piwar1; /* 0x8df0 - PEX Inbound Window Attributes Register 1 */
- char res20[12];
- uint pedr; /* 0x8e00 - PEX Error Detect Register */
- char res21[4];
- uint peer; /* 0x8e08 - PEX Error Interrupt Enable Register */
- char res22[4];
- uint pecdr; /* 0x8e10 - PEX Error Disable Register */
- char res23[12];
- uint peer_stat; /* 0x8e20 - PEX Error Capture Status Register */
- char res24[4];
- uint perr_cap0; /* 0x8e28 - PEX Error Capture Register 0 */
- uint perr_cap1; /* 0x8e2c - PEX Error Capture Register 1 */
- uint perr_cap2; /* 0x8e30 - PEX Error Capture Register 2 */
- uint perr_cap3; /* 0x8e34 - PEX Error Capture Register 3 */
- char res25[452];
- char res26[4];
-} ccsr_pex_t;
-
-/* Hyper Transport Register Block (0xA000-0xB000) */
-typedef struct ccsr_ht {
- uint hcfg_addr; /* 0xa000 - HT Configuration Address register */
- uint hcfg_data; /* 0xa004 - HT Configuration Data register */
- char res1[3064];
- uint howtar0; /* 0xac00 - HT Outbound Window 0 Translation register */
- char res2[12];
- uint howar0; /* 0xac10 - HT Outbound Window 0 Attributes register */
- char res3[12];
- uint howtar1; /* 0xac20 - HT Outbound Window 1 Translation register */
- char res4[4];
- uint howbar1; /* 0xac28 - HT Outbound Window 1 Base Address register */
- char res5[4];
- uint howar1; /* 0xac30 - HT Outbound Window 1 Attributes register */
- char res6[12];
- uint howtar2; /* 0xac40 - HT Outbound Window 2 Translation register */
- char res7[4];
- uint howbar2; /* 0xac48 - HT Outbound Window 2 Base Address register */
- char res8[4];
- uint howar2; /* 0xac50 - HT Outbound Window 2 Attributes register */
- char res9[12];
- uint howtar3; /* 0xac60 - HT Outbound Window 3 Translation register */
- char res10[4];
- uint howbar3; /* 0xac68 - HT Outbound Window 3 Base Address register */
- char res11[4];
- uint howar3; /* 0xac70 - HT Outbound Window 3 Attributes register */
- char res12[12];
- uint howtar4; /* 0xac80 - HT Outbound Window 4 Translation register */
- char res13[4];
- uint howbar4; /* 0xac88 - HT Outbound Window 4 Base Address register */
- char res14[4];
- uint howar4; /* 0xac90 - HT Outbound Window 4 Attributes register */
- char res15[236];
- uint hiwtar4; /* 0xad80 - HT Inbound Window 4 Translation register */
- char res16[4];
- uint hiwbar4; /* 0xad88 - HT Inbound Window 4 Base Address register */
- char res17[4];
- uint hiwar4; /* 0xad90 - HT Inbound Window 4 Attributes register */
- char res18[12];
- uint hiwtar3; /* 0xada0 - HT Inbound Window 3 Translation register */
- char res19[4];
- uint hiwbar3; /* 0xada8 - HT Inbound Window 3 Base Address register */
- char res20[4];
- uint hiwar3; /* 0xadb0 - HT Inbound Window 3 Attributes register */
- char res21[12];
- uint hiwtar2; /* 0xadc0 - HT Inbound Window 2 Translation register */
- char res22[4];
- uint hiwbar2; /* 0xadc8 - HT Inbound Window 2 Base Address register */
- char res23[4];
- uint hiwar2; /* 0xadd0 - HT Inbound Window 2 Attributes register */
- char res24[12];
- uint hiwtar1; /* 0xade0 - HT Inbound Window 1 Translation register */
- char res25[4];
- uint hiwbar1; /* 0xade8 - HT Inbound Window 1 Base Address register */
- char res26[4];
- uint hiwar1; /* 0xadf0 - HT Inbound Window 1 Attributes register */
- char res27[12];
- uint hedr; /* 0xae00 - HT Error Detect register */
- char res28[4];
- uint heier; /* 0xae08 - HT Error Interrupt Enable register */
- char res29[4];
- uint hecdr; /* 0xae10 - HT Error Capture Disbale register */
- char res30[12];
- uint hecsr; /* 0xae20 - HT Error Capture Status register */
- char res31[4];
- uint hec0; /* 0xae28 - HT Error Capture 0 register */
- uint hec1; /* 0xae2c - HT Error Capture 1 register */
- uint hec2; /* 0xae30 - HT Error Capture 2 register */
- char res32[460];
-} ccsr_ht_t;
-
-/* DMA Registers(0x2_1000-0x2_2000) */
-typedef struct ccsr_dma {
- char res1[256];
- struct fsl_dma dma[4];
- uint dgsr; /* 0x21300 - DMA General Status Register */
- char res2[3324];
-} ccsr_dma_t;
-
-/* tsec1-4: 24000-28000 */
-typedef struct ccsr_tsec {
- uint id; /* 0x24000 - Controller ID Register */
- char res1[12];
- uint ievent; /* 0x24010 - Interrupt Event Register */
- uint imask; /* 0x24014 - Interrupt Mask Register */
- uint edis; /* 0x24018 - Error Disabled Register */
- char res2[4];
- uint ecntrl; /* 0x24020 - Ethernet Control Register */
- char res2_1[4];
- uint ptv; /* 0x24028 - Pause Time Value Register */
- uint dmactrl; /* 0x2402c - DMA Control Register */
- uint tbipa; /* 0x24030 - TBI PHY Address Register */
- char res3[88];
- uint fifo_tx_thr; /* 0x2408c - FIFO transmit threshold register */
- char res4[8];
- uint fifo_tx_starve; /* 0x24098 - FIFO transmit starve register */
- uint fifo_tx_starve_shutoff;/* 0x2409c - FIFO transmit starve shutoff register */
- char res4_1[4];
- uint fifo_rx_pause; /* 0x240a4 - FIFO receive pause threshold register */
- uint fifo_rx_alarm; /* 0x240a8 - FIFO receive alarm threshold register */
- char res5[84];
- uint tctrl; /* 0x24100 - Transmit Control Register */
- uint tstat; /* 0x24104 - Transmit Status Register */
- uint dfvlan; /* 0x24108 - Default VLAN control word */
- char res6[4];
- uint txic; /* 0x24110 - Transmit interrupt coalescing Register */
- uint tqueue; /* 0x24114 - Transmit Queue Control Register */
- char res7[40];
- uint tr03wt; /* 0x24140 - TxBD Rings 0-3 round-robin weightings */
- uint tw47wt; /* 0x24144 - TxBD Rings 4-7 round-robin weightings */
- char res8[52];
- uint tbdbph; /* 0x2417c - Transmit Data Buffer Pointer High Register */
- char res9[4];
- uint tbptr0; /* 0x24184 - Transmit Buffer Descriptor Pointer for Ring 0 */
- char res10[4];
- uint tbptr1; /* 0x2418C - Transmit Buffer Descriptor Pointer for Ring 1 */
- char res11[4];
- uint tbptr2; /* 0x24194 - Transmit Buffer Descriptor Pointer for Ring 2 */
- char res12[4];
- uint tbptr3; /* 0x2419C - Transmit Buffer Descriptor Pointer for Ring 3 */
- char res13[4];
- uint tbptr4; /* 0x241A4 - Transmit Buffer Descriptor Pointer for Ring 4 */
- char res14[4];
- uint tbptr5; /* 0x241AC - Transmit Buffer Descriptor Pointer for Ring 5 */
- char res15[4];
- uint tbptr6; /* 0x241B4 - Transmit Buffer Descriptor Pointer for Ring 6 */
- char res16[4];
- uint tbptr7; /* 0x241BC - Transmit Buffer Descriptor Pointer for Ring 7 */
- char res17[64];
- uint tbaseh; /* 0x24200 - Transmit Descriptor Base Address High Register */
- uint tbase0; /* 0x24204 - Transmit Descriptor Base Address Register of Ring 0 */
- char res18[4];
- uint tbase1; /* 0x2420C - Transmit Descriptor base address of Ring 1 */
- char res19[4];
- uint tbase2; /* 0x24214 - Transmit Descriptor base address of Ring 2 */
- char res20[4];
- uint tbase3; /* 0x2421C - Transmit Descriptor base address of Ring 3 */
- char res21[4];
- uint tbase4; /* 0x24224 - Transmit Descriptor base address of Ring 4 */
- char res22[4];
- uint tbase5; /* 0x2422C - Transmit Descriptor base address of Ring 5 */
- char res23[4];
- uint tbase6; /* 0x24234 - Transmit Descriptor base address of Ring 6 */
- char res24[4];
- uint tbase7; /* 0x2423C - Transmit Descriptor base address of Ring 7 */
- char res25[192];
- uint rctrl; /* 0x24300 - Receive Control Register */
- uint rstat; /* 0x24304 - Receive Status Register */
- char res26[8];
- uint rxic; /* 0x24310 - Receive Interrupt Coalecing Register */
- uint rqueue; /* 0x24314 - Receive queue control register */
- char res27[24];
- uint rbifx; /* 0x24330 - Receive bit field extract control Register */
- uint rqfar; /* 0x24334 - Receive queue filing table address Register */
- uint rqfcr; /* 0x24338 - Receive queue filing table control Register */
- uint rqfpr; /* 0x2433c - Receive queue filing table property Register */
- uint mrblr; /* 0x24340 - Maximum Receive Buffer Length Register */
- char res28[56];
- uint rbdbph; /* 0x2437C - Receive Data Buffer Pointer High */
- char res29[4];
- uint rbptr0; /* 0x24384 - Receive Buffer Descriptor Pointer for Ring 0 */
- char res30[4];
- uint rbptr1; /* 0x2438C - Receive Buffer Descriptor Pointer for Ring 1 */
- char res31[4];
- uint rbptr2; /* 0x24394 - Receive Buffer Descriptor Pointer for Ring 2 */
- char res32[4];
- uint rbptr3; /* 0x2439C - Receive Buffer Descriptor Pointer for Ring 3 */
- char res33[4];
- uint rbptr4; /* 0x243A4 - Receive Buffer Descriptor Pointer for Ring 4 */
- char res34[4];
- uint rbptr5; /* 0x243AC - Receive Buffer Descriptor Pointer for Ring 5 */
- char res35[4];
- uint rbptr6; /* 0x243B4 - Receive Buffer Descriptor Pointer for Ring 6 */
- char res36[4];
- uint rbptr7; /* 0x243BC - Receive Buffer Descriptor Pointer for Ring 7 */
- char res37[64];
- uint rbaseh; /* 0x24400 - Receive Descriptor Base Address High 0 */
- uint rbase0; /* 0x24404 - Receive Descriptor Base Address of Ring 0 */
- char res38[4];
- uint rbase1; /* 0x2440C - Receive Descriptor Base Address of Ring 1 */
- char res39[4];
- uint rbase2; /* 0x24414 - Receive Descriptor Base Address of Ring 2 */
- char res40[4];
- uint rbase3; /* 0x2441C - Receive Descriptor Base Address of Ring 3 */
- char res41[4];
- uint rbase4; /* 0x24424 - Receive Descriptor Base Address of Ring 4 */
- char res42[4];
- uint rbase5; /* 0x2442C - Receive Descriptor Base Address of Ring 5 */
- char res43[4];
- uint rbase6; /* 0x24434 - Receive Descriptor Base Address of Ring 6 */
- char res44[4];
- uint rbase7; /* 0x2443C - Receive Descriptor Base Address of Ring 7 */
- char res45[192];
- uint maccfg1; /* 0x24500 - MAC Configuration 1 Register */
- uint maccfg2; /* 0x24504 - MAC Configuration 2 Register */
- uint ipgifg; /* 0x24508 - Inter Packet Gap/Inter Frame Gap Register */
- uint hafdup; /* 0x2450c - Half Duplex Register */
- uint maxfrm; /* 0x24510 - Maximum Frame Length Register */
- char res46[12];
- uint miimcfg; /* 0x24520 - MII Management Configuration Register */
- uint miimcom; /* 0x24524 - MII Management Command Register */
- uint miimadd; /* 0x24528 - MII Management Address Register */
- uint miimcon; /* 0x2452c - MII Management Control Register */
- uint miimstat; /* 0x24530 - MII Management Status Register */
- uint miimind; /* 0x24534 - MII Management Indicator Register */
- uint ifctrl; /* 0x24538 - Interface Contrl Register */
- uint ifstat; /* 0x2453c - Interface Status Register */
- uint macstnaddr1; /* 0x24540 - Station Address Part 1 Register */
- uint macstnaddr2; /* 0x24544 - Station Address Part 2 Register */
- uint mac01addr1; /* 0x24548 - MAC exact match address 1, part 1 */
- uint mac01addr2; /* 0x2454C - MAC exact match address 1, part 2 */
- uint mac02addr1; /* 0x24550 - MAC exact match address 2, part 1 */
- uint mac02addr2; /* 0x24554 - MAC exact match address 2, part 2 */
- uint mac03addr1; /* 0x24558 - MAC exact match address 3, part 1 */
- uint mac03addr2; /* 0x2455C - MAC exact match address 3, part 2 */
- uint mac04addr1; /* 0x24560 - MAC exact match address 4, part 1 */
- uint mac04addr2; /* 0x24564 - MAC exact match address 4, part 2 */
- uint mac05addr1; /* 0x24568 - MAC exact match address 5, part 1 */
- uint mac05addr2; /* 0x2456C - MAC exact match address 5, part 2 */
- uint mac06addr1; /* 0x24570 - MAC exact match address 6, part 1 */
- uint mac06addr2; /* 0x24574 - MAC exact match address 6, part 2 */
- uint mac07addr1; /* 0x24578 - MAC exact match address 7, part 1 */
- uint mac07addr2; /* 0x2457C - MAC exact match address 7, part 2 */
- uint mac08addr1; /* 0x24580 - MAC exact match address 8, part 1 */
- uint mac08addr2; /* 0x24584 - MAC exact match address 8, part 2 */
- uint mac09addr1; /* 0x24588 - MAC exact match address 9, part 1 */
- uint mac09addr2; /* 0x2458C - MAC exact match address 9, part 2 */
- uint mac10addr1; /* 0x24590 - MAC exact match address 10, part 1 */
- uint mac10addr2; /* 0x24594 - MAC exact match address 10, part 2 */
- uint mac11addr1; /* 0x24598 - MAC exact match address 11, part 1 */
- uint mac11addr2; /* 0x2459C - MAC exact match address 11, part 2 */
- uint mac12addr1; /* 0x245A0 - MAC exact match address 12, part 1 */
- uint mac12addr2; /* 0x245A4 - MAC exact match address 12, part 2 */
- uint mac13addr1; /* 0x245A8 - MAC exact match address 13, part 1 */
- uint mac13addr2; /* 0x245AC - MAC exact match address 13, part 2 */
- uint mac14addr1; /* 0x245B0 - MAC exact match address 14, part 1 */
- uint mac14addr2; /* 0x245B4 - MAC exact match address 14, part 2 */
- uint mac15addr1; /* 0x245B8 - MAC exact match address 15, part 1 */
- uint mac15addr2; /* 0x245BC - MAC exact match address 15, part 2 */
- char res48[192];
- uint tr64; /* 0x24680 - Transmit and Receive 64-byte Frame Counter */
- uint tr127; /* 0x24684 - Transmit and Receive 65-127 byte Frame Counter */
- uint tr255; /* 0x24688 - Transmit and Receive 128-255 byte Frame Counter */
- uint tr511; /* 0x2468c - Transmit and Receive 256-511 byte Frame Counter */
- uint tr1k; /* 0x24690 - Transmit and Receive 512-1023 byte Frame Counter */
- uint trmax; /* 0x24694 - Transmit and Receive 1024-1518 byte Frame Counter */
- uint trmgv; /* 0x24698 - Transmit and Receive 1519-1522 byte Good VLAN Frame */
- uint rbyt; /* 0x2469c - Receive Byte Counter */
- uint rpkt; /* 0x246a0 - Receive Packet Counter */
- uint rfcs; /* 0x246a4 - Receive FCS Error Counter */
- uint rmca; /* 0x246a8 - Receive Multicast Packet Counter */
- uint rbca; /* 0x246ac - Receive Broadcast Packet Counter */
- uint rxcf; /* 0x246b0 - Receive Control Frame Packet Counter */
- uint rxpf; /* 0x246b4 - Receive Pause Frame Packet Counter */
- uint rxuo; /* 0x246b8 - Receive Unknown OP Code Counter */
- uint raln; /* 0x246bc - Receive Alignment Error Counter */
- uint rflr; /* 0x246c0 - Receive Frame Length Error Counter */
- uint rcde; /* 0x246c4 - Receive Code Error Counter */
- uint rcse; /* 0x246c8 - Receive Carrier Sense Error Counter */
- uint rund; /* 0x246cc - Receive Undersize Packet Counter */
- uint rovr; /* 0x246d0 - Receive Oversize Packet Counter */
- uint rfrg; /* 0x246d4 - Receive Fragments Counter */
- uint rjbr; /* 0x246d8 - Receive Jabber Counter */
- uint rdrp; /* 0x246dc - Receive Drop Counter */
- uint tbyt; /* 0x246e0 - Transmit Byte Counter Counter */
- uint tpkt; /* 0x246e4 - Transmit Packet Counter */
- uint tmca; /* 0x246e8 - Transmit Multicast Packet Counter */
- uint tbca; /* 0x246ec - Transmit Broadcast Packet Counter */
- uint txpf; /* 0x246f0 - Transmit Pause Control Frame Counter */
- uint tdfr; /* 0x246f4 - Transmit Deferral Packet Counter */
- uint tedf; /* 0x246f8 - Transmit Excessive Deferral Packet Counter */
- uint tscl; /* 0x246fc - Transmit Single Collision Packet Counter */
- uint tmcl; /* 0x24700 - Transmit Multiple Collision Packet Counter */
- uint tlcl; /* 0x24704 - Transmit Late Collision Packet Counter */
- uint txcl; /* 0x24708 - Transmit Excessive Collision Packet Counter */
- uint tncl; /* 0x2470c - Transmit Total Collision Counter */
- char res49[4];
- uint tdrp; /* 0x24714 - Transmit Drop Frame Counter */
- uint tjbr; /* 0x24718 - Transmit Jabber Frame Counter */
- uint tfcs; /* 0x2471c - Transmit FCS Error Counter */
- uint txcf; /* 0x24720 - Transmit Control Frame Counter */
- uint tovr; /* 0x24724 - Transmit Oversize Frame Counter */
- uint tund; /* 0x24728 - Transmit Undersize Frame Counter */
- uint tfrg; /* 0x2472c - Transmit Fragments Frame Counter */
- uint car1; /* 0x24730 - Carry Register One */
- uint car2; /* 0x24734 - Carry Register Two */
- uint cam1; /* 0x24738 - Carry Mask Register One */
- uint cam2; /* 0x2473c - Carry Mask Register Two */
- uint rrej; /* 0x24740 - Receive filer rejected packet counter */
- char res50[188];
- uint iaddr0; /* 0x24800 - Indivdual address register 0 */
- uint iaddr1; /* 0x24804 - Indivdual address register 1 */
- uint iaddr2; /* 0x24808 - Indivdual address register 2 */
- uint iaddr3; /* 0x2480c - Indivdual address register 3 */
- uint iaddr4; /* 0x24810 - Indivdual address register 4 */
- uint iaddr5; /* 0x24814 - Indivdual address register 5 */
- uint iaddr6; /* 0x24818 - Indivdual address register 6 */
- uint iaddr7; /* 0x2481c - Indivdual address register 7 */
- char res51[96];
- uint gaddr0; /* 0x24880 - Global address register 0 */
- uint gaddr1; /* 0x24884 - Global address register 1 */
- uint gaddr2; /* 0x24888 - Global address register 2 */
- uint gaddr3; /* 0x2488c - Global address register 3 */
- uint gaddr4; /* 0x24890 - Global address register 4 */
- uint gaddr5; /* 0x24894 - Global address register 5 */
- uint gaddr6; /* 0x24898 - Global address register 6 */
- uint gaddr7; /* 0x2489c - Global address register 7 */
- char res52[352];
- uint fifocfg; /* 0x24A00 - FIFO interface configuration register */
- char res53[500];
- uint attr; /* 0x24BF8 - DMA Attribute register */
- uint attreli; /* 0x24BFC - DMA Attribute extract length and index register */
- char res54[1024];
-} ccsr_tsec_t;
-
-/* PIC Registers(0x4_0000-0x6_1000) */
-
-typedef struct ccsr_pic {
- char res1[64];
- uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
- char res2[12];
- uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
- char res3[12];
- uint ipidr2; /* 0x40060 - Interprocessor Interrupt Dispatch Register 2 */
- char res4[12];
- uint ipidr3; /* 0x40070 - Interprocessor Interrupt Dispatch Register 3 */
- char res5[12];
- uint ctpr; /* 0x40080 - Current Task Priority Register */
- char res6[12];
- uint whoami; /* 0x40090 - Who Am I Register */
- char res7[12];
- uint iack; /* 0x400a0 - Interrupt Acknowledge Register */
- char res8[12];
- uint eoi; /* 0x400b0 - End Of Interrupt Register */
- char res9[3916];
- uint frr; /* 0x41000 - Feature Reporting Register */
- char res10[28];
- uint gcr; /* 0x41020 - Global Configuration Register */
-#define MPC86xx_PICGCR_RST 0x80000000
-#define MPC86xx_PICGCR_MODE 0x20000000
- char res11[92];
- uint vir; /* 0x41080 - Vendor Identification Register */
- char res12[12];
- uint pir; /* 0x41090 - Processor Initialization Register */
- char res13[12];
- uint ipivpr0; /* 0x410a0 - IPI Vector/Priority Register 0 */
- char res14[12];
- uint ipivpr1; /* 0x410b0 - IPI Vector/Priority Register 1 */
- char res15[12];
- uint ipivpr2; /* 0x410c0 - IPI Vector/Priority Register 2 */
- char res16[12];
- uint ipivpr3; /* 0x410d0 - IPI Vector/Priority Register 3 */
- char res17[12];
- uint svr; /* 0x410e0 - Spurious Vector Register */
- char res18[12];
- uint tfrr; /* 0x410f0 - Timer Frequency Reporting Register */
- char res19[12];
- uint gtccr0; /* 0x41100 - Global Timer Current Count Register 0 */
- char res20[12];
- uint gtbcr0; /* 0x41110 - Global Timer Base Count Register 0 */
- char res21[12];
- uint gtvpr0; /* 0x41120 - Global Timer Vector/Priority Register 0 */
- char res22[12];
- uint gtdr0; /* 0x41130 - Global Timer Destination Register 0 */
- char res23[12];
- uint gtccr1; /* 0x41140 - Global Timer Current Count Register 1 */
- char res24[12];
- uint gtbcr1; /* 0x41150 - Global Timer Base Count Register 1 */
- char res25[12];
- uint gtvpr1; /* 0x41160 - Global Timer Vector/Priority Register 1 */
- char res26[12];
- uint gtdr1; /* 0x41170 - Global Timer Destination Register 1 */
- char res27[12];
- uint gtccr2; /* 0x41180 - Global Timer Current Count Register 2 */
- char res28[12];
- uint gtbcr2; /* 0x41190 - Global Timer Base Count Register 2 */
- char res29[12];
- uint gtvpr2; /* 0x411a0 - Global Timer Vector/Priority Register 2 */
- char res30[12];
- uint gtdr2; /* 0x411b0 - Global Timer Destination Register 2 */
- char res31[12];
- uint gtccr3; /* 0x411c0 - Global Timer Current Count Register 3 */
- char res32[12];
- uint gtbcr3; /* 0x411d0 - Global Timer Base Count Register 3 */
- char res33[12];
- uint gtvpr3; /* 0x411e0 - Global Timer Vector/Priority Register 3 */
- char res34[12];
- uint gtdr3; /* 0x411f0 - Global Timer Destination Register 3 */
- char res35[268];
- uint tcr; /* 0x41300 - Timer Control Register */
- char res36[12];
- uint irqsr0; /* 0x41310 - IRQ_OUT Summary Register 0 */
- char res37[12];
- uint irqsr1; /* 0x41320 - IRQ_OUT Summary Register 1 */
- char res38[12];
- uint cisr0; /* 0x41330 - Critical Interrupt Summary Register 0 */
- char res39[12];
- uint cisr1; /* 0x41340 - Critical Interrupt Summary Register 1 */
- char res40[12];
- uint pm0mr0; /* 0x41350 - Performance monitor 0 mask register 0 */
- char res41[12];
- uint pm0mr1; /* 0x41360 - Performance monitor 0 mask register 1 */
- char res42[12];
- uint pm1mr0; /* 0x41370 - Performance monitor 1 mask register 0 */
- char res43[12];
- uint pm1mr1; /* 0x41380 - Performance monitor 1 mask register 1 */
- char res44[12];
- uint pm2mr0; /* 0x41390 - Performance monitor 2 mask register 0 */
- char res45[12];
- uint pm2mr1; /* 0x413A0 - Performance monitor 2 mask register 1 */
- char res46[12];
- uint pm3mr0; /* 0x413B0 - Performance monitor 3 mask register 0 */
- char res47[12];
- uint pm3mr1; /* 0x413C0 - Performance monitor 3 mask register 1 */
- char res48[60];
- uint msgr0; /* 0x41400 - Message Register 0 */
- char res49[12];
- uint msgr1; /* 0x41410 - Message Register 1 */
- char res50[12];
- uint msgr2; /* 0x41420 - Message Register 2 */
- char res51[12];
- uint msgr3; /* 0x41430 - Message Register 3 */
- char res52[204];
- uint mer; /* 0x41500 - Message Enable Register */
- char res53[12];
- uint msr; /* 0x41510 - Message Status Register */
- char res54[60140];
- uint eivpr0; /* 0x50000 - External Interrupt Vector/Priority Register 0 */
- char res55[12];
- uint eidr0; /* 0x50010 - External Interrupt Destination Register 0 */
- char res56[12];
- uint eivpr1; /* 0x50020 - External Interrupt Vector/Priority Register 1 */
- char res57[12];
- uint eidr1; /* 0x50030 - External Interrupt Destination Register 1 */
- char res58[12];
- uint eivpr2; /* 0x50040 - External Interrupt Vector/Priority Register 2 */
- char res59[12];
- uint eidr2; /* 0x50050 - External Interrupt Destination Register 2 */
- char res60[12];
- uint eivpr3; /* 0x50060 - External Interrupt Vector/Priority Register 3 */
- char res61[12];
- uint eidr3; /* 0x50070 - External Interrupt Destination Register 3 */
- char res62[12];
- uint eivpr4; /* 0x50080 - External Interrupt Vector/Priority Register 4 */
- char res63[12];
- uint eidr4; /* 0x50090 - External Interrupt Destination Register 4 */
- char res64[12];
- uint eivpr5; /* 0x500a0 - External Interrupt Vector/Priority Register 5 */
- char res65[12];
- uint eidr5; /* 0x500b0 - External Interrupt Destination Register 5 */
- char res66[12];
- uint eivpr6; /* 0x500c0 - External Interrupt Vector/Priority Register 6 */
- char res67[12];
- uint eidr6; /* 0x500d0 - External Interrupt Destination Register 6 */
- char res68[12];
- uint eivpr7; /* 0x500e0 - External Interrupt Vector/Priority Register 7 */
- char res69[12];
- uint eidr7; /* 0x500f0 - External Interrupt Destination Register 7 */
- char res70[12];
- uint eivpr8; /* 0x50100 - External Interrupt Vector/Priority Register 8 */
- char res71[12];
- uint eidr8; /* 0x50110 - External Interrupt Destination Register 8 */
- char res72[12];
- uint eivpr9; /* 0x50120 - External Interrupt Vector/Priority Register 9 */
- char res73[12];
- uint eidr9; /* 0x50130 - External Interrupt Destination Register 9 */
- char res74[12];
- uint eivpr10; /* 0x50140 - External Interrupt Vector/Priority Register 10 */
- char res75[12];
- uint eidr10; /* 0x50150 - External Interrupt Destination Register 10 */
- char res76[12];
- uint eivpr11; /* 0x50160 - External Interrupt Vector/Priority Register 11 */
- char res77[12];
- uint eidr11; /* 0x50170 - External Interrupt Destination Register 11 */
- char res78[140];
- uint iivpr0; /* 0x50200 - Internal Interrupt Vector/Priority Register 0 */
- char res79[12];
- uint iidr0; /* 0x50210 - Internal Interrupt Destination Register 0 */
- char res80[12];
- uint iivpr1; /* 0x50220 - Internal Interrupt Vector/Priority Register 1 */
- char res81[12];
- uint iidr1; /* 0x50230 - Internal Interrupt Destination Register 1 */
- char res82[12];
- uint iivpr2; /* 0x50240 - Internal Interrupt Vector/Priority Register 2 */
- char res83[12];
- uint iidr2; /* 0x50250 - Internal Interrupt Destination Register 2 */
- char res84[12];
- uint iivpr3; /* 0x50260 - Internal Interrupt Vector/Priority Register 3 */
- char res85[12];
- uint iidr3; /* 0x50270 - Internal Interrupt Destination Register 3 */
- char res86[12];
- uint iivpr4; /* 0x50280 - Internal Interrupt Vector/Priority Register 4 */
- char res87[12];
- uint iidr4; /* 0x50290 - Internal Interrupt Destination Register 4 */
- char res88[12];
- uint iivpr5; /* 0x502a0 - Internal Interrupt Vector/Priority Register 5 */
- char res89[12];
- uint iidr5; /* 0x502b0 - Internal Interrupt Destination Register 5 */
- char res90[12];
- uint iivpr6; /* 0x502c0 - Internal Interrupt Vector/Priority Register 6 */
- char res91[12];
- uint iidr6; /* 0x502d0 - Internal Interrupt Destination Register 6 */
- char res92[12];
- uint iivpr7; /* 0x502e0 - Internal Interrupt Vector/Priority Register 7 */
- char res93[12];
- uint iidr7; /* 0x502f0 - Internal Interrupt Destination Register 7 */
- char res94[12];
- uint iivpr8; /* 0x50300 - Internal Interrupt Vector/Priority Register 8 */
- char res95[12];
- uint iidr8; /* 0x50310 - Internal Interrupt Destination Register 8 */
- char res96[12];
- uint iivpr9; /* 0x50320 - Internal Interrupt Vector/Priority Register 9 */
- char res97[12];
- uint iidr9; /* 0x50330 - Internal Interrupt Destination Register 9 */
- char res98[12];
- uint iivpr10; /* 0x50340 - Internal Interrupt Vector/Priority Register 10 */
- char res99[12];
- uint iidr10; /* 0x50350 - Internal Interrupt Destination Register 10 */
- char res100[12];
- uint iivpr11; /* 0x50360 - Internal Interrupt Vector/Priority Register 11 */
- char res101[12];
- uint iidr11; /* 0x50370 - Internal Interrupt Destination Register 11 */
- char res102[12];
- uint iivpr12; /* 0x50380 - Internal Interrupt Vector/Priority Register 12 */
- char res103[12];
- uint iidr12; /* 0x50390 - Internal Interrupt Destination Register 12 */
- char res104[12];
- uint iivpr13; /* 0x503a0 - Internal Interrupt Vector/Priority Register 13 */
- char res105[12];
- uint iidr13; /* 0x503b0 - Internal Interrupt Destination Register 13 */
- char res106[12];
- uint iivpr14; /* 0x503c0 - Internal Interrupt Vector/Priority Register 14 */
- char res107[12];
- uint iidr14; /* 0x503d0 - Internal Interrupt Destination Register 14 */
- char res108[12];
- uint iivpr15; /* 0x503e0 - Internal Interrupt Vector/Priority Register 15 */
- char res109[12];
- uint iidr15; /* 0x503f0 - Internal Interrupt Destination Register 15 */
- char res110[12];
- uint iivpr16; /* 0x50400 - Internal Interrupt Vector/Priority Register 16 */
- char res111[12];
- uint iidr16; /* 0x50410 - Internal Interrupt Destination Register 16 */
- char res112[12];
- uint iivpr17; /* 0x50420 - Internal Interrupt Vector/Priority Register 17 */
- char res113[12];
- uint iidr17; /* 0x50430 - Internal Interrupt Destination Register 17 */
- char res114[12];
- uint iivpr18; /* 0x50440 - Internal Interrupt Vector/Priority Register 18 */
- char res115[12];
- uint iidr18; /* 0x50450 - Internal Interrupt Destination Register 18 */
- char res116[12];
- uint iivpr19; /* 0x50460 - Internal Interrupt Vector/Priority Register 19 */
- char res117[12];
- uint iidr19; /* 0x50470 - Internal Interrupt Destination Register 19 */
- char res118[12];
- uint iivpr20; /* 0x50480 - Internal Interrupt Vector/Priority Register 20 */
- char res119[12];
- uint iidr20; /* 0x50490 - Internal Interrupt Destination Register 20 */
- char res120[12];
- uint iivpr21; /* 0x504a0 - Internal Interrupt Vector/Priority Register 21 */
- char res121[12];
- uint iidr21; /* 0x504b0 - Internal Interrupt Destination Register 21 */
- char res122[12];
- uint iivpr22; /* 0x504c0 - Internal Interrupt Vector/Priority Register 22 */
- char res123[12];
- uint iidr22; /* 0x504d0 - Internal Interrupt Destination Register 22 */
- char res124[12];
- uint iivpr23; /* 0x504e0 - Internal Interrupt Vector/Priority Register 23 */
- char res125[12];
- uint iidr23; /* 0x504f0 - Internal Interrupt Destination Register 23 */
- char res126[12];
- uint iivpr24; /* 0x50500 - Internal Interrupt Vector/Priority Register 24 */
- char res127[12];
- uint iidr24; /* 0x50510 - Internal Interrupt Destination Register 24 */
- char res128[12];
- uint iivpr25; /* 0x50520 - Internal Interrupt Vector/Priority Register 25 */
- char res129[12];
- uint iidr25; /* 0x50530 - Internal Interrupt Destination Register 25 */
- char res130[12];
- uint iivpr26; /* 0x50540 - Internal Interrupt Vector/Priority Register 26 */
- char res131[12];
- uint iidr26; /* 0x50550 - Internal Interrupt Destination Register 26 */
- char res132[12];
- uint iivpr27; /* 0x50560 - Internal Interrupt Vector/Priority Register 27 */
- char res133[12];
- uint iidr27; /* 0x50570 - Internal Interrupt Destination Register 27 */
- char res134[12];
- uint iivpr28; /* 0x50580 - Internal Interrupt Vector/Priority Register 28 */
- char res135[12];
- uint iidr28; /* 0x50590 - Internal Interrupt Destination Register 28 */
- char res136[12];
- uint iivpr29; /* 0x505a0 - Internal Interrupt Vector/Priority Register 29 */
- char res137[12];
- uint iidr29; /* 0x505b0 - Internal Interrupt Destination Register 29 */
- char res138[12];
- uint iivpr30; /* 0x505c0 - Internal Interrupt Vector/Priority Register 30 */
- char res139[12];
- uint iidr30; /* 0x505d0 - Internal Interrupt Destination Register 30 */
- char res140[12];
- uint iivpr31; /* 0x505e0 - Internal Interrupt Vector/Priority Register 31 */
- char res141[12];
- uint iidr31; /* 0x505f0 - Internal Interrupt Destination Register 31 */
- char res142[4108];
- uint mivpr0; /* 0x51600 - Messaging Interrupt Vector/Priority Register 0 */
- char res143[12];
- uint midr0; /* 0x51610 - Messaging Interrupt Destination Register 0 */
- char res144[12];
- uint mivpr1; /* 0x51620 - Messaging Interrupt Vector/Priority Register 1 */
- char res145[12];
- uint midr1; /* 0x51630 - Messaging Interrupt Destination Register 1 */
- char res146[12];
- uint mivpr2; /* 0x51640 - Messaging Interrupt Vector/Priority Register 2 */
- char res147[12];
- uint midr2; /* 0x51650 - Messaging Interrupt Destination Register 2 */
- char res148[12];
- uint mivpr3; /* 0x51660 - Messaging Interrupt Vector/Priority Register 3 */
- char res149[12];
- uint midr3; /* 0x51670 - Messaging Interrupt Destination Register 3 */
- char res150[59852];
- uint ipi0dr0; /* 0x60040 - Processor 0 Interprocessor Interrupt Dispatch Register 0 */
- char res151[12];
- uint ipi0dr1; /* 0x60050 - Processor 0 Interprocessor Interrupt Dispatch Register 1 */
- char res152[12];
- uint ipi0dr2; /* 0x60060 - Processor 0 Interprocessor Interrupt Dispatch Register 2 */
- char res153[12];
- uint ipi0dr3; /* 0x60070 - Processor 0 Interprocessor Interrupt Dispatch Register 3 */
- char res154[12];
- uint ctpr0; /* 0x60080 - Current Task Priority Register for Processor 0 */
- char res155[12];
- uint whoami0; /* 0x60090 - Who Am I Register for Processor 0 */
- char res156[12];
- uint iack0; /* 0x600a0 - Interrupt Acknowledge Register for Processor 0 */
- char res157[12];
- uint eoi0; /* 0x600b0 - End Of Interrupt Register for Processor 0 */
- char res158[3916];
-} ccsr_pic_t;
-
-/* RapidIO Registers(0xc_0000-0xe_0000) */
-
-typedef struct ccsr_rio {
- uint didcar; /* 0xc0000 - Device Identity Capability Register */
- uint dicar; /* 0xc0004 - Device Information Capability Register */
- uint aidcar; /* 0xc0008 - Assembly Identity Capability Register */
- uint aicar; /* 0xc000c - Assembly Information Capability Register */
- uint pefcar; /* 0xc0010 - Processing Element Features Capability Register */
- uint spicar; /* 0xc0014 - Switch Port Information Capability Register */
- uint socar; /* 0xc0018 - Source Operations Capability Register */
- uint docar; /* 0xc001c - Destination Operations Capability Register */
- char res1[32];
- uint msr; /* 0xc0040 - Mailbox Command And Status Register */
- uint pwdcsr; /* 0xc0044 - Port-Write and Doorbell Command And Status Register */
- char res2[4];
- uint pellccsr; /* 0xc004c - Processing Element Logic Layer Control Command and Status Register */
- char res3[12];
- uint lcsbacsr; /* 0xc005c - Local Configuration Space Base Address Command and Status Register */
- uint bdidcsr; /* 0xc0060 - Base Device ID Command and Status Register */
- char res4[4];
- uint hbdidlcsr; /* 0xc0068 - Host Base Device ID Lock Command and Status Register */
- uint ctcsr; /* 0xc006c - Component Tag Command and Status Register */
- char res5[144];
- uint pmbh0csr; /* 0xc0100 - 8/16 LP-LVDS Port Maintenance Block Header 0 Command and Status Register */
- char res6[28];
- uint pltoccsr; /* 0xc0120 - Port Link Time-out Control Command and Status Register */
- uint prtoccsr; /* 0xc0124 - Port Response Time-out Control Command and Status Register */
- char res7[20];
- uint pgccsr; /* 0xc013c - Port General Command and Status Register */
- uint plmreqcsr; /* 0xc0140 - Port Link Maintenance Request Command and Status Register */
- uint plmrespcsr; /* 0xc0144 - Port Link Maintenance Response Command and Status Register */
- uint plascsr; /* 0xc0148 - Port Local Ackid Status Command and Status Register */
- char res8[12];
- uint pescsr; /* 0xc0158 - Port Error and Status Command and Status Register */
- uint pccsr; /* 0xc015c - Port Control Command and Status Register */
- char res9[1184];
- uint erbh; /* 0xc0600 - Error Reporting Block Header Register */
- char res10[4];
- uint ltledcsr; /* 0xc0608 - Logical/Transport layer error detect status register */
- uint ltleecsr; /* 0xc060c - Logical/Transport layer error enable register */
- char res11[4];
- uint ltlaccsr; /* 0xc0614 - Logical/Transport layer addresss capture register */
- uint ltldidccsr; /* 0xc0618 - Logical/Transport layer device ID capture register */
- uint ltlcccsr; /* 0xc061c - Logical/Transport layer control capture register */
- char res12[32];
- uint edcsr; /* 0xc0640 - Port 0 error detect status register */
- uint erecsr; /* 0xc0644 - Port 0 error rate enable status register */
- uint ecacsr; /* 0xc0648 - Port 0 error capture attributes register */
- uint pcseccsr0; /* 0xc064c - Port 0 packet/control symbol error capture register 0 */
- uint peccsr1; /* 0xc0650 - Port 0 error capture command and status register 1 */
- uint peccsr2; /* 0xc0654 - Port 0 error capture command and status register 2 */
- uint peccsr3; /* 0xc0658 - Port 0 error capture command and status register 3 */
- char res13[12];
- uint ercsr; /* 0xc0668 - Port 0 error rate command and status register */
- uint ertcsr; /* 0xc066C - Port 0 error rate threshold status register*/
- char res14[63892];
- uint llcr; /* 0xd0004 - Logical Layer Configuration Register */
- char res15[12];
- uint epwisr; /* 0xd0010 - Error / Port-Write Interrupt Status Register */
- char res16[12];
- uint lretcr; /* 0xd0020 - Logical Retry Error Threshold Configuration Register */
- char res17[92];
- uint pretcr; /* 0xd0080 - Physical Retry Erorr Threshold Configuration Register */
- char res18[124];
- uint adidcsr; /* 0xd0100 - Port 0 Alt. Device ID Command and Status Register */
- char res19[28];
- uint ptaacr; /* 0xd0120 - Port 0 Pass-Through/Accept-All Configuration Register */
- char res20[12];
- uint iecsr; /* 0xd0130 - Port 0 Implementation Error Status Register */
- char res21[12];
- uint pcr; /* 0xd0140 - Port 0 Phsyical Configuration RegisterRegister */
- char res22[20];
- uint slcsr; /* 0xd0158 - Port 0 Serial Link Command and Status Register */
- char res23[4];
- uint sleir; /* 0xd0160 - Port 0 Serial Link Error Injection Register */
- char res24[2716];
- uint rowtar0; /* 0xd0c00 - RapidIO Outbound Window Translation Address Register 0 */
- uint rowtear0; /* 0xd0c04 - RapidIO Outbound Window Translation Ext. Address Register 0 */
- char res25[8];
- uint rowar0; /* 0xd0c10 - RapidIO Outbound Attributes Register 0 */
- char res26[12];
- uint rowtar1; /* 0xd0c20 - RapidIO Outbound Window Translation Address Register 1 */
- uint rowtear1; /* 0xd0c24 - RapidIO Outbound Window Translation Ext. Address Register 1 */
- uint rowbar1; /* 0xd0c28 - RapidIO Outbound Window Base Address Register 1 */
- char res27[4];
- uint rowar1; /* 0xd0c30 - RapidIO Outbound Attributes Register 1 */
- uint rows1r1; /* 0xd0c34 - RapidIO Outbound Window Segment 1 Register 1 */
- uint rows2r1; /* 0xd0c38 - RapidIO Outbound Window Segment 2 Register 1 */
- uint rows3r1; /* 0xd0c3c - RapidIO Outbound Window Segment 3 Register 1 */
- uint rowtar2; /* 0xd0c40 - RapidIO Outbound Window Translation Address Register 2 */
- uint rowtear2; /* 0xd0c44 - RapidIO Outbound Window Translation Ext. Address Register 2 */
- uint rowbar2; /* 0xd0c48 - RapidIO Outbound Window Base Address Register 2 */
- char res28[4];
- uint rowar2; /* 0xd0c50 - RapidIO Outbound Attributes Register 2 */
- uint rows1r2; /* 0xd0c54 - RapidIO Outbound Window Segment 1 Register 2 */
- uint rows2r2; /* 0xd0c58 - RapidIO Outbound Window Segment 2 Register 2 */
- uint rows3r2; /* 0xd0c5c - RapidIO Outbound Window Segment 3 Register 2 */
- uint rowtar3; /* 0xd0c60 - RapidIO Outbound Window Translation Address Register 3 */
- uint rowtear3; /* 0xd0c64 - RapidIO Outbound Window Translation Ext. Address Register 3 */
- uint rowbar3; /* 0xd0c68 - RapidIO Outbound Window Base Address Register 3 */
- char res29[4];
- uint rowar3; /* 0xd0c70 - RapidIO Outbound Attributes Register 3 */
- uint rows1r3; /* 0xd0c74 - RapidIO Outbound Window Segment 1 Register 3 */
- uint rows2r3; /* 0xd0c78 - RapidIO Outbound Window Segment 2 Register 3 */
- uint rows3r3; /* 0xd0c7c - RapidIO Outbound Window Segment 3 Register 3 */
- uint rowtar4; /* 0xd0c80 - RapidIO Outbound Window Translation Address Register 4 */
- uint rowtear4; /* 0xd0c84 - RapidIO Outbound Window Translation Ext. Address Register 4 */
- uint rowbar4; /* 0xd0c88 - RapidIO Outbound Window Base Address Register 4 */
- char res30[4];
- uint rowar4; /* 0xd0c90 - RapidIO Outbound Attributes Register 4 */
- uint rows1r4; /* 0xd0c94 - RapidIO Outbound Window Segment 1 Register 4 */
- uint rows2r4; /* 0xd0c98 - RapidIO Outbound Window Segment 2 Register 4 */
- uint rows3r4; /* 0xd0c9c - RapidIO Outbound Window Segment 3 Register 4 */
- uint rowtar5; /* 0xd0ca0 - RapidIO Outbound Window Translation Address Register 5 */
- uint rowtear5; /* 0xd0ca4 - RapidIO Outbound Window Translation Ext. Address Register 5 */
- uint rowbar5; /* 0xd0ca8 - RapidIO Outbound Window Base Address Register 5 */
- char res31[4];
- uint rowar5; /* 0xd0cb0 - RapidIO Outbound Attributes Register 5 */
- uint rows1r5; /* 0xd0cb4 - RapidIO Outbound Window Segment 1 Register 5 */
- uint rows2r5; /* 0xd0cb8 - RapidIO Outbound Window Segment 2 Register 5 */
- uint rows3r5; /* 0xd0cbc - RapidIO Outbound Window Segment 3 Register 5 */
- uint rowtar6; /* 0xd0cc0 - RapidIO Outbound Window Translation Address Register 6 */
- uint rowtear6; /* 0xd0cc4 - RapidIO Outbound Window Translation Ext. Address Register 6 */
- uint rowbar6; /* 0xd0cc8 - RapidIO Outbound Window Base Address Register 6 */
- char res32[4];
- uint rowar6; /* 0xd0cd0 - RapidIO Outbound Attributes Register 6 */
- uint rows1r6; /* 0xd0cd4 - RapidIO Outbound Window Segment 1 Register 6 */
- uint rows2r6; /* 0xd0cd8 - RapidIO Outbound Window Segment 2 Register 6 */
- uint rows3r6; /* 0xd0cdc - RapidIO Outbound Window Segment 3 Register 6 */
- uint rowtar7; /* 0xd0ce0 - RapidIO Outbound Window Translation Address Register 7 */
- uint rowtear7; /* 0xd0ce4 - RapidIO Outbound Window Translation Ext. Address Register 7 */
- uint rowbar7; /* 0xd0ce8 - RapidIO Outbound Window Base Address Register 7 */
- char res33[4];
- uint rowar7; /* 0xd0cf0 - RapidIO Outbound Attributes Register 7 */
- uint rows1r7; /* 0xd0cf4 - RapidIO Outbound Window Segment 1 Register 7 */
- uint rows2r7; /* 0xd0cf8 - RapidIO Outbound Window Segment 2 Register 7 */
- uint rows3r7; /* 0xd0cfc - RapidIO Outbound Window Segment 3 Register 7 */
- uint rowtar8; /* 0xd0d00 - RapidIO Outbound Window Translation Address Register 8 */
- uint rowtear8; /* 0xd0d04 - RapidIO Outbound Window Translation Ext. Address Register 8 */
- uint rowbar8; /* 0xd0d08 - RapidIO Outbound Window Base Address Register 8 */
- char res34[4];
- uint rowar8; /* 0xd0d10 - RapidIO Outbound Attributes Register 8 */
- uint rows1r8; /* 0xd0d14 - RapidIO Outbound Window Segment 1 Register 8 */
- uint rows2r8; /* 0xd0d18 - RapidIO Outbound Window Segment 2 Register 8 */
- uint rows3r8; /* 0xd0d1c - RapidIO Outbound Window Segment 3 Register 8 */
- char res35[64];
- uint riwtar4; /* 0xd0d60 - RapidIO Inbound Window Translation Address Register 4 */
- uint riwbar4; /* 0xd0d68 - RapidIO Inbound Window Base Address Register 4 */
- char res36[4];
- uint riwar4; /* 0xd0d70 - RapidIO Inbound Attributes Register 4 */
- char res37[12];
- uint riwtar3; /* 0xd0d80 - RapidIO Inbound Window Translation Address Register 3 */
- char res38[4];
- uint riwbar3; /* 0xd0d88 - RapidIO Inbound Window Base Address Register 3 */
- char res39[4];
- uint riwar3; /* 0xd0d90 - RapidIO Inbound Attributes Register 3 */
- char res40[12];
- uint riwtar2; /* 0xd0da0 - RapidIO Inbound Window Translation Address Register 2 */
- char res41[4];
- uint riwbar2; /* 0xd0da8 - RapidIO Inbound Window Base Address Register 2 */
- char res42[4];
- uint riwar2; /* 0xd0db0 - RapidIO Inbound Attributes Register 2 */
- char res43[12];
- uint riwtar1; /* 0xd0dc0 - RapidIO Inbound Window Translation Address Register 1 */
- char res44[4];
- uint riwbar1; /* 0xd0dc8 - RapidIO Inbound Window Base Address Register 1 */
- char res45[4];
- uint riwar1; /* 0xd0dd0 - RapidIO Inbound Attributes Register 1 */
- char res46[12];
- uint riwtar0; /* 0xd0de0 - RapidIO Inbound Window Translation Address Register 0 */
- char res47[12];
- uint riwar0; /* 0xd0df0 - RapidIO Inbound Attributes Register 0 */
- char res48[12];
- uint pnfedr; /* 0xd0e00 - Port Notification/Fatal Error Detect Register */
- uint pnfedir; /* 0xd0e04 - Port Notification/Fatal Error Detect Register */
- uint pnfeier; /* 0xd0e08 - Port Notification/Fatal Error Interrupt Enable Register */
- uint pecr; /* 0xd0e0c - Port Error Control Register */
- uint pepcsr0; /* 0xd0e10 - Port Error Packet/Control Symbol Register 0 */
- uint pepr1; /* 0xd0e14 - Port Error Packet Register 1 */
- uint pepr2; /* 0xd0e18 - Port Error Packet Register 2 */
- char res49[4];
- uint predr; /* 0xd0e20 - Port Recoverable Error Detect Register */
- char res50[4];
- uint pertr; /* 0xd0e28 - Port Error Recovery Threshold Register */
- uint prtr; /* 0xd0e2c - Port Retry Threshold Register */
- char res51[8656];
- uint omr; /* 0xd3000 - Outbound Mode Register */
- uint osr; /* 0xd3004 - Outbound Status Register */
- uint eodqtpar; /* 0xd3008 - Extended Outbound Descriptor Queue Tail Pointer Address Register */
- uint odqtpar; /* 0xd300c - Outbound Descriptor Queue Tail Pointer Address Register */
- uint eosar; /* 0xd3010 - Extended Outbound Unit Source Address Register */
- uint osar; /* 0xd3014 - Outbound Unit Source Address Register */
- uint odpr; /* 0xd3018 - Outbound Destination Port Register */
- uint odatr; /* 0xd301c - Outbound Destination Attributes Register */
- uint odcr; /* 0xd3020 - Outbound Doubleword Count Register */
- uint eodqhpar; /* 0xd3024 - Extended Outbound Descriptor Queue Head Pointer Address Register */
- uint odqhpar; /* 0xd3028 - Outbound Descriptor Queue Head Pointer Address Register */
- uint oretr; /* 0xd302C - Outbound Retry Error Threshold Register */
- uint omgr; /* 0xd3030 - Outbound Multicast Group Register */
- uint omlr; /* 0xd3034 - Outbound Multicast List Register */
- char res52[40];
- uint imr; /* 0xd3060 - Outbound Mode Register */
- uint isr; /* 0xd3064 - Inbound Status Register */
- uint eidqtpar; /* 0xd3068 - Extended Inbound Descriptor Queue Tail Pointer Address Register */
- uint idqtpar; /* 0xd306c - Inbound Descriptor Queue Tail Pointer Address Register */
- uint eifqhpar; /* 0xd3070 - Extended Inbound Frame Queue Head Pointer Address Register */
- uint ifqhpar; /* 0xd3074 - Inbound Frame Queue Head Pointer Address Register */
- uint imirir; /* 0xd3078 - Inbound Maximum Interrutp Report Interval Register */
- char res53[900];
- uint oddmr; /* 0xd3400 - Outbound Doorbell Mode Register */
- uint oddsr; /* 0xd3404 - Outbound Doorbell Status Register */
- char res54[16];
- uint oddpr; /* 0xd3418 - Outbound Doorbell Destination Port Register */
- uint oddatr; /* 0xd341C - Outbound Doorbell Destination Attributes Register */
- char res55[12];
- uint oddretr; /* 0xd342C - Outbound Doorbell Retry Threshold Configuration Register */
- char res56[48];
- uint idmr; /* 0xd3460 - Inbound Doorbell Mode Register */
- uint idsr; /* 0xd3464 - Inbound Doorbell Status Register */
- uint iedqtpar; /* 0xd3468 - Extended Inbound Doorbell Queue Tail Pointer Address Register */
- uint iqtpar; /* 0xd346c - Inbound Doorbell Queue Tail Pointer Address Register */
- uint iedqhpar; /* 0xd3470 - Extended Inbound Doorbell Queue Head Pointer Address Register */
- uint idqhpar; /* 0xd3474 - Inbound Doorbell Queue Head Pointer Address Register */
- uint idmirir; /* 0xd3478 - Inbound Doorbell Max Interrupt Report Interval Register */
- char res57[100];
- uint pwmr; /* 0xd34e0 - Port-Write Mode Register */
- uint pwsr; /* 0xd34e4 - Port-Write Status Register */
- uint epwqbar; /* 0xd34e8 - Extended Port-Write Queue Base Address Register */
- uint pwqbar; /* 0xd34ec - Port-Write Queue Base Address Register */
- char res58[51984];
-} ccsr_rio_t;
-
-/* Global Utilities Register Block(0xe_0000-0xf_ffff) */
-typedef struct ccsr_gur {
- uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
- uint porbmsr; /* 0xe0004 - POR boot mode status register */
- uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
- uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
- uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
- char res1[12];
- uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
- char res2[12];
- uint gpiocr; /* 0xe0030 - GPIO control register */
- char res3[12];
- uint gpoutdr; /* 0xe0040 - General-purpose output data register */
- char res4[12];
- uint gpindr; /* 0xe0050 - General-purpose input data register */
- char res5[12];
- uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
- char res6[12];
- uint devdisr; /* 0xe0070 - Device disable control */
- char res7[12];
- uint powmgtcsr; /* 0xe0080 - Power management status and control register */
- char res8[12];
- uint mcpsumr; /* 0xe0090 - Machine check summary register */
- uint rstrscr; /* 0xe0094 - Reset request status and control register */
- char res9[8];
- uint pvr; /* 0xe00a0 - Processor version register */
- uint svr; /* 0xe00a4 - System version register */
- char res10a[8];
- uint rstcr; /* 0xe00b0 - Reset control register */
- char res10b[1868];
- uint clkdvdr; /* 0xe0800 - Clock Divide register */
- char res10c[796];
- uint ddr1clkdr; /* 0xe0b20 - DDRC1 Clock Disable register */
- char res10d[4];
- uint ddr2clkdr; /* 0xe0b28 - DDRC2 Clock Disable register */
- char res10e[724];
- uint clkocr; /* 0xe0e00 - Clock out select register */
- char res11[12];
- uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
- char res12[12];
- uint lbcdllcr; /* 0xe0e20 - LBC DLL control register */
- char res13a[224];
- uint srds1cr0; /* 0xe0f04 - SerDes1 control register 0 */
- char res13b[4];
- uint srds1cr1; /* 0xe0f08 - SerDes1 control register 1 */
- char res14[24];
- uint ddrioovcr; /* 0xe0f24 - DDR IO Overdrive Control register */
- char res15a[24];
- uint srds2cr0; /* 0xe0f40 - SerDes2 control register 0 */
- uint srds2cr1; /* 0xe0f44 - SerDes2 control register 1 */
- char res16[184];
-} ccsr_gur_t;
-
-#define MPC8610_PORBMSR_HA 0x00070000
-#define MPC8610_PORBMSR_HA_SHIFT 16
-#define MPC8641_PORBMSR_HA 0x00060000
-#define MPC8641_PORBMSR_HA_SHIFT 17
-#define MPC8610_PORDEVSR_IO_SEL 0x00380000
-#define MPC8610_PORDEVSR_IO_SEL_SHIFT 19
-#define MPC8641_PORDEVSR_IO_SEL 0x000F0000
-#define MPC8641_PORDEVSR_IO_SEL_SHIFT 16
-#define MPC86xx_PORDEVSR_CORE1TE 0x00000080 /* ASMP (Core1 addr trans) */
-#define MPC86xx_DEVDISR_PCIEX1 0x80000000
-#define MPC86xx_DEVDISR_PCIEX2 0x40000000
-#define MPC86xx_DEVDISR_PCI1 0x80000000
-#define MPC86xx_DEVDISR_PCIE1 0x40000000
-#define MPC86xx_DEVDISR_PCIE2 0x20000000
-#define MPC86xx_DEVDISR_CPU0 0x00008000
-#define MPC86xx_DEVDISR_CPU1 0x00004000
-#define MPC86xx_RSTCR_HRST_REQ 0x00000002
-
-/*
- * Watchdog register block(0xe_4000-0xe_4fff)
- */
-typedef struct ccsr_wdt {
- uint res0;
- uint swcrr; /* System watchdog control register */
- uint swcnr; /* System watchdog count register */
- char res1[2];
- ushort swsrr; /* System watchdog service register */
- char res2[4080];
-} ccsr_wdt_t;
-
-typedef struct immap {
- ccsr_local_mcm_t im_local_mcm;
- ccsr_ddr_t im_ddr1;
- ccsr_i2c_t im_i2c;
- ccsr_duart_t im_duart;
- ccsr_lbc_t im_lbc;
- ccsr_ddr_t im_ddr2;
- char res1[4096];
- ccsr_pex_t im_pex1;
- ccsr_pex_t im_pex2;
- ccsr_ht_t im_ht;
- char res2[90112];
- ccsr_dma_t im_dma;
- char res3[8192];
- ccsr_tsec_t im_tsec1;
- ccsr_tsec_t im_tsec2;
- ccsr_tsec_t im_tsec3;
- ccsr_tsec_t im_tsec4;
- char res4[98304];
- ccsr_pic_t im_pic;
- char res5[389120];
- ccsr_rio_t im_rio;
- ccsr_gur_t im_gur;
- char res6[12288];
- ccsr_wdt_t im_wdt;
-} immap_t;
-
-extern immap_t *immr;
-
-#define CONFIG_SYS_MPC86xx_DDR_OFFSET (0x2000)
-#define CONFIG_SYS_MPC86xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC86xx_DDR2_OFFSET (0x6000)
-#define CONFIG_SYS_MPC86xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000)
-#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
-
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_MDIO1_OFFSET 0x24000
-
-#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
-
-#endif /*__IMMAP_86xx__*/
+++ /dev/null
-/*
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
- *
- * Copyright (c) 2006-2009 Freescale Semiconductor, Inc.
- * Author: Shlomi Gridih <gridish@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __IMMAP_QE_H__
-#define __IMMAP_QE_H__
-
-/* QE I-RAM
-*/
-typedef struct qe_iram {
- u32 iadd; /* I-RAM Address Register */
- u32 idata; /* I-RAM Data Register */
- u8 res0[0x4];
- u32 iready;
- u8 res1[0x70];
-} __attribute__ ((packed)) qe_iram_t;
-
-/* QE Interrupt Controller
-*/
-typedef struct qe_ic {
- u32 qicr;
- u32 qivec;
- u32 qripnr;
- u32 qipnr;
- u32 qipxcc;
- u32 qipycc;
- u32 qipwcc;
- u32 qipzcc;
- u32 qimr;
- u32 qrimr;
- u32 qicnr;
- u8 res0[0x4];
- u32 qiprta;
- u32 qiprtb;
- u8 res1[0x4];
- u32 qricr;
- u8 res2[0x20];
- u32 qhivec;
- u8 res3[0x1C];
-} __attribute__ ((packed)) qe_ic_t;
-
-/* Communications Processor
-*/
-typedef struct cp_qe {
- u32 cecr; /* QE command register */
- u32 ceccr; /* QE controller configuration register */
- u32 cecdr; /* QE command data register */
- u8 res0[0xA];
- u16 ceter; /* QE timer event register */
- u8 res1[0x2];
- u16 cetmr; /* QE timers mask register */
- u32 cetscr; /* QE time-stamp timer control register */
- u32 cetsr1; /* QE time-stamp register 1 */
- u32 cetsr2; /* QE time-stamp register 2 */
- u8 res2[0x8];
- u32 cevter; /* QE virtual tasks event register */
- u32 cevtmr; /* QE virtual tasks mask register */
- u16 cercr; /* QE RAM control register */
- u8 res3[0x2];
- u8 res4[0x24];
- u16 ceexe1; /* QE external request 1 event register */
- u8 res5[0x2];
- u16 ceexm1; /* QE external request 1 mask register */
- u8 res6[0x2];
- u16 ceexe2; /* QE external request 2 event register */
- u8 res7[0x2];
- u16 ceexm2; /* QE external request 2 mask register */
- u8 res8[0x2];
- u16 ceexe3; /* QE external request 3 event register */
- u8 res9[0x2];
- u16 ceexm3; /* QE external request 3 mask register */
- u8 res10[0x2];
- u16 ceexe4; /* QE external request 4 event register */
- u8 res11[0x2];
- u16 ceexm4; /* QE external request 4 mask register */
- u8 res12[0x2];
- u8 res13[0x280];
-} __attribute__ ((packed)) cp_qe_t;
-
-/* QE Multiplexer
-*/
-typedef struct qe_mux {
- u32 cmxgcr; /* CMX general clock route register */
- u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
- u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
- u32 cmxsi1syr; /* CMX SI1 SYNC route register */
- u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
- u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
- u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
- u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
- u32 cmxupcr; /* CMX UPC clock route register */
- u8 res0[0x1C];
-} __attribute__ ((packed)) qe_mux_t;
-
-/* QE Timers
-*/
-typedef struct qe_timers {
- u8 gtcfr1; /* Timer 1 2 global configuration register */
- u8 res0[0x3];
- u8 gtcfr2; /* Timer 3 4 global configuration register */
- u8 res1[0xB];
- u16 gtmdr1; /* Timer 1 mode register */
- u16 gtmdr2; /* Timer 2 mode register */
- u16 gtrfr1; /* Timer 1 reference register */
- u16 gtrfr2; /* Timer 2 reference register */
- u16 gtcpr1; /* Timer 1 capture register */
- u16 gtcpr2; /* Timer 2 capture register */
- u16 gtcnr1; /* Timer 1 counter */
- u16 gtcnr2; /* Timer 2 counter */
- u16 gtmdr3; /* Timer 3 mode register */
- u16 gtmdr4; /* Timer 4 mode register */
- u16 gtrfr3; /* Timer 3 reference register */
- u16 gtrfr4; /* Timer 4 reference register */
- u16 gtcpr3; /* Timer 3 capture register */
- u16 gtcpr4; /* Timer 4 capture register */
- u16 gtcnr3; /* Timer 3 counter */
- u16 gtcnr4; /* Timer 4 counter */
- u16 gtevr1; /* Timer 1 event register */
- u16 gtevr2; /* Timer 2 event register */
- u16 gtevr3; /* Timer 3 event register */
- u16 gtevr4; /* Timer 4 event register */
- u16 gtps; /* Timer 1 prescale register */
- u8 res2[0x46];
-} __attribute__ ((packed)) qe_timers_t;
-
-/* BRG
-*/
-typedef struct qe_brg {
- u32 brgc1; /* BRG1 configuration register */
- u32 brgc2; /* BRG2 configuration register */
- u32 brgc3; /* BRG3 configuration register */
- u32 brgc4; /* BRG4 configuration register */
- u32 brgc5; /* BRG5 configuration register */
- u32 brgc6; /* BRG6 configuration register */
- u32 brgc7; /* BRG7 configuration register */
- u32 brgc8; /* BRG8 configuration register */
- u32 brgc9; /* BRG9 configuration register */
- u32 brgc10; /* BRG10 configuration register */
- u32 brgc11; /* BRG11 configuration register */
- u32 brgc12; /* BRG12 configuration register */
- u32 brgc13; /* BRG13 configuration register */
- u32 brgc14; /* BRG14 configuration register */
- u32 brgc15; /* BRG15 configuration register */
- u32 brgc16; /* BRG16 configuration register */
- u8 res0[0x40];
-} __attribute__ ((packed)) qe_brg_t;
-
-/* SPI
-*/
-typedef struct spi {
- u8 res0[0x20];
- u32 spmode; /* SPI mode register */
- u8 res1[0x2];
- u8 spie; /* SPI event register */
- u8 res2[0x1];
- u8 res3[0x2];
- u8 spim; /* SPI mask register */
- u8 res4[0x1];
- u8 res5[0x1];
- u8 spcom; /* SPI command register */
- u8 res6[0x2];
- u32 spitd; /* SPI transmit data register (cpu mode) */
- u32 spird; /* SPI receive data register (cpu mode) */
- u8 res7[0x8];
-} __attribute__ ((packed)) spi_t;
-
-/* SI
-*/
-typedef struct si1 {
- u16 siamr1; /* SI1 TDMA mode register */
- u16 sibmr1; /* SI1 TDMB mode register */
- u16 sicmr1; /* SI1 TDMC mode register */
- u16 sidmr1; /* SI1 TDMD mode register */
- u8 siglmr1_h; /* SI1 global mode register high */
- u8 res0[0x1];
- u8 sicmdr1_h; /* SI1 command register high */
- u8 res2[0x1];
- u8 sistr1_h; /* SI1 status register high */
- u8 res3[0x1];
- u16 sirsr1_h; /* SI1 RAM shadow address register high */
- u8 sitarc1; /* SI1 RAM counter Tx TDMA */
- u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
- u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
- u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
- u8 sirarc1; /* SI1 RAM counter Rx TDMA */
- u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
- u8 sircrc1; /* SI1 RAM counter Rx TDMC */
- u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
- u8 res4[0x8];
- u16 siemr1; /* SI1 TDME mode register 16 bits */
- u16 sifmr1; /* SI1 TDMF mode register 16 bits */
- u16 sigmr1; /* SI1 TDMG mode register 16 bits */
- u16 sihmr1; /* SI1 TDMH mode register 16 bits */
- u8 siglmg1_l; /* SI1 global mode register low 8 bits */
- u8 res5[0x1];
- u8 sicmdr1_l; /* SI1 command register low 8 bits */
- u8 res6[0x1];
- u8 sistr1_l; /* SI1 status register low 8 bits */
- u8 res7[0x1];
- u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */
- u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
- u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
- u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
- u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
- u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
- u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
- u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
- u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
- u8 res8[0x8];
- u32 siml1; /* SI1 multiframe limit register */
- u8 siedm1; /* SI1 extended diagnostic mode register */
- u8 res9[0xBB];
-} __attribute__ ((packed)) si1_t;
-
-/* SI Routing Tables
-*/
-typedef struct sir {
- u8 tx[0x400];
- u8 rx[0x400];
- u8 res0[0x800];
-} __attribute__ ((packed)) sir_t;
-
-/* USB Controller.
-*/
-typedef struct usb_ctlr {
- u8 usb_usmod;
- u8 usb_usadr;
- u8 usb_uscom;
- u8 res1[1];
- u16 usb_usep1;
- u16 usb_usep2;
- u16 usb_usep3;
- u16 usb_usep4;
- u8 res2[4];
- u16 usb_usber;
- u8 res3[2];
- u16 usb_usbmr;
- u8 res4[1];
- u8 usb_usbs;
- u16 usb_ussft;
- u8 res5[2];
- u16 usb_usfrn;
- u8 res6[0x22];
-} __attribute__ ((packed)) usb_t;
-
-/* MCC
-*/
-typedef struct mcc {
- u32 mcce; /* MCC event register */
- u32 mccm; /* MCC mask register */
- u32 mccf; /* MCC configuration register */
- u32 merl; /* MCC emergency request level register */
- u8 res0[0xF0];
-} __attribute__ ((packed)) mcc_t;
-
-/* QE UCC Slow
-*/
-typedef struct ucc_slow {
- u32 gumr_l; /* UCCx general mode register (low) */
- u32 gumr_h; /* UCCx general mode register (high) */
- u16 upsmr; /* UCCx protocol-specific mode register */
- u8 res0[0x2];
- u16 utodr; /* UCCx transmit on demand register */
- u16 udsr; /* UCCx data synchronization register */
- u16 ucce; /* UCCx event register */
- u8 res1[0x2];
- u16 uccm; /* UCCx mask register */
- u8 res2[0x1];
- u8 uccs; /* UCCx status register */
- u8 res3[0x24];
- u16 utpt;
- u8 guemr; /* UCC general extended mode register */
- u8 res4[0x200 - 0x091];
-} __attribute__ ((packed)) ucc_slow_t;
-
-typedef struct ucc_mii_mng {
- u32 miimcfg; /* MII management configuration reg */
- u32 miimcom; /* MII management command reg */
- u32 miimadd; /* MII management address reg */
- u32 miimcon; /* MII management control reg */
- u32 miimstat; /* MII management status reg */
- u32 miimind; /* MII management indication reg */
- u32 ifctl; /* interface control reg */
- u32 ifstat; /* interface statux reg */
-} __attribute__ ((packed))uec_mii_t;
-
-typedef struct ucc_ethernet {
- u32 maccfg1; /* mac configuration reg. 1 */
- u32 maccfg2; /* mac configuration reg. 2 */
- u32 ipgifg; /* interframe gap reg. */
- u32 hafdup; /* half-duplex reg. */
- u8 res1[0x10];
- u32 miimcfg; /* MII management configuration reg */
- u32 miimcom; /* MII management command reg */
- u32 miimadd; /* MII management address reg */
- u32 miimcon; /* MII management control reg */
- u32 miimstat; /* MII management status reg */
- u32 miimind; /* MII management indication reg */
- u32 ifctl; /* interface control reg */
- u32 ifstat; /* interface statux reg */
- u32 macstnaddr1; /* mac station address part 1 reg */
- u32 macstnaddr2; /* mac station address part 2 reg */
- u8 res2[0x8];
- u32 uempr; /* UCC Ethernet Mac parameter reg */
- u32 utbipar; /* UCC tbi address reg */
- u16 uescr; /* UCC Ethernet statistics control reg */
- u8 res3[0x180 - 0x15A];
- u32 tx64; /* Total number of frames (including bad
- * frames) transmitted that were exactly
- * of the minimal length (64 for un tagged,
- * 68 for tagged, or with length exactly
- * equal to the parameter MINLength */
- u32 tx127; /* Total number of frames (including bad
- * frames) transmitted that were between
- * MINLength (Including FCS length==4)
- * and 127 octets */
- u32 tx255; /* Total number of frames (including bad
- * frames) transmitted that were between
- * 128 (Including FCS length==4) and 255
- * octets */
- u32 rx64; /* Total number of frames received including
- * bad frames that were exactly of the
- * mninimal length (64 bytes) */
- u32 rx127; /* Total number of frames (including bad
- * frames) received that were between
- * MINLength (Including FCS length==4)
- * and 127 octets */
- u32 rx255; /* Total number of frames (including
- * bad frames) received that were between
- * 128 (Including FCS length==4) and 255
- * octets */
- u32 txok; /* Total number of octets residing in frames
- * that where involved in succesfull
- * transmission */
- u16 txcf; /* Total number of PAUSE control frames
- * transmitted by this MAC */
- u8 res4[0x2];
- u32 tmca; /* Total number of frames that were transmitted
- * succesfully with the group address bit set
- * that are not broadcast frames */
- u32 tbca; /* Total number of frames transmitted
- * succesfully that had destination address
- * field equal to the broadcast address */
- u32 rxfok; /* Total number of frames received OK */
- u32 rxbok; /* Total number of octets received OK */
- u32 rbyt; /* Total number of octets received including
- * octets in bad frames. Must be implemented
- * in HW because it includes octets in frames
- * that never even reach the UCC */
- u32 rmca; /* Total number of frames that were received
- * succesfully with the group address bit set
- * that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
- * that had destination address equal to the
- * broadcast address */
- u32 scar; /* Statistics carry register */
- u32 scam; /* Statistics caryy mask register */
- u8 res5[0x200 - 0x1c4];
-} __attribute__ ((packed)) uec_t;
-
-/* QE UCC Fast
-*/
-typedef struct ucc_fast {
- u32 gumr; /* UCCx general mode register */
- u32 upsmr; /* UCCx protocol-specific mode register */
- u16 utodr; /* UCCx transmit on demand register */
- u8 res0[0x2];
- u16 udsr; /* UCCx data synchronization register */
- u8 res1[0x2];
- u32 ucce; /* UCCx event register */
- u32 uccm; /* UCCx mask register. */
- u8 uccs; /* UCCx status register */
- u8 res2[0x7];
- u32 urfb; /* UCC receive FIFO base */
- u16 urfs; /* UCC receive FIFO size */
- u8 res3[0x2];
- u16 urfet; /* UCC receive FIFO emergency threshold */
- u16 urfset; /* UCC receive FIFO special emergency
- * threshold */
- u32 utfb; /* UCC transmit FIFO base */
- u16 utfs; /* UCC transmit FIFO size */
- u8 res4[0x2];
- u16 utfet; /* UCC transmit FIFO emergency threshold */
- u8 res5[0x2];
- u16 utftt; /* UCC transmit FIFO transmit threshold */
- u8 res6[0x2];
- u16 utpt; /* UCC transmit polling timer */
- u8 res7[0x2];
- u32 urtry; /* UCC retry counter register */
- u8 res8[0x4C];
- u8 guemr; /* UCC general extended mode register */
- u8 res9[0x100 - 0x091];
- uec_t ucc_eth;
-} __attribute__ ((packed)) ucc_fast_t;
-
-/* QE UCC
-*/
-typedef struct ucc_common {
- u8 res1[0x90];
- u8 guemr;
- u8 res2[0x200 - 0x091];
-} __attribute__ ((packed)) ucc_common_t;
-
-typedef struct ucc {
- union {
- ucc_slow_t slow;
- ucc_fast_t fast;
- ucc_common_t common;
- };
-} __attribute__ ((packed)) ucc_t;
-
-/* MultiPHY UTOPIA POS Controllers (UPC)
-*/
-typedef struct upc {
- u32 upgcr; /* UTOPIA/POS general configuration register */
- u32 uplpa; /* UTOPIA/POS last PHY address */
- u32 uphec; /* ATM HEC register */
- u32 upuc; /* UTOPIA/POS UCC configuration */
- u32 updc1; /* UTOPIA/POS device 1 configuration */
- u32 updc2; /* UTOPIA/POS device 2 configuration */
- u32 updc3; /* UTOPIA/POS device 3 configuration */
- u32 updc4; /* UTOPIA/POS device 4 configuration */
- u32 upstpa; /* UTOPIA/POS STPA threshold */
- u8 res0[0xC];
- u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
- u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
- u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
- u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
- u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
- u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
- u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
- u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
- u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
- u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
- u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
- u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
- u32 upde1; /* UTOPIA/POS device 1 event */
- u32 upde2; /* UTOPIA/POS device 2 event */
- u32 upde3; /* UTOPIA/POS device 3 event */
- u32 upde4; /* UTOPIA/POS device 4 event */
- u16 uprp1;
- u16 uprp2;
- u16 uprp3;
- u16 uprp4;
- u8 res1[0x8];
- u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
- u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
- u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
- u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
- u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
- u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
- u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
- u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
- u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
- u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
- u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
- u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
- u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
- u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
- u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
- u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
- u32 uper1; /* Device 1 port enable register */
- u32 uper2; /* Device 2 port enable register */
- u32 uper3; /* Device 3 port enable register */
- u32 uper4; /* Device 4 port enable register */
- u8 res2[0x150];
-} __attribute__ ((packed)) upc_t;
-
-/* SDMA
-*/
-typedef struct sdma {
- u32 sdsr; /* Serial DMA status register */
- u32 sdmr; /* Serial DMA mode register */
- u32 sdtr1; /* SDMA system bus threshold register */
- u32 sdtr2; /* SDMA secondary bus threshold register */
- u32 sdhy1; /* SDMA system bus hysteresis register */
- u32 sdhy2; /* SDMA secondary bus hysteresis register */
- u32 sdta1; /* SDMA system bus address register */
- u32 sdta2; /* SDMA secondary bus address register */
- u32 sdtm1; /* SDMA system bus MSNUM register */
- u32 sdtm2; /* SDMA secondary bus MSNUM register */
- u8 res0[0x10];
- u32 sdaqr; /* SDMA address bus qualify register */
- u32 sdaqmr; /* SDMA address bus qualify mask register */
- u8 res1[0x4];
- u32 sdwbcr; /* SDMA CAM entries base register */
- u8 res2[0x38];
-} __attribute__ ((packed)) sdma_t;
-
-/* Debug Space
-*/
-typedef struct dbg {
- u32 bpdcr; /* Breakpoint debug command register */
- u32 bpdsr; /* Breakpoint debug status register */
- u32 bpdmr; /* Breakpoint debug mask register */
- u32 bprmrr0; /* Breakpoint request mode risc register 0 */
- u32 bprmrr1; /* Breakpoint request mode risc register 1 */
- u8 res0[0x8];
- u32 bprmtr0; /* Breakpoint request mode trb register 0 */
- u32 bprmtr1; /* Breakpoint request mode trb register 1 */
- u8 res1[0x8];
- u32 bprmir; /* Breakpoint request mode immediate register */
- u32 bprmsr; /* Breakpoint request mode serial register */
- u32 bpemr; /* Breakpoint exit mode register */
- u8 res2[0x48];
-} __attribute__ ((packed)) dbg_t;
-
-/*
- * RISC Special Registers (Trap and Breakpoint). These are described in
- * the QE Developer's Handbook.
-*/
-typedef struct rsp {
- u32 tibcr[16]; /* Trap/instruction breakpoint control regs */
- u8 res0[64];
- u32 ibcr0;
- u32 ibs0;
- u32 ibcnr0;
- u8 res1[4];
- u32 ibcr1;
- u32 ibs1;
- u32 ibcnr1;
- u32 npcr;
- u32 dbcr;
- u32 dbar;
- u32 dbamr;
- u32 dbsr;
- u32 dbcnr;
- u8 res2[12];
- u32 dbdr_h;
- u32 dbdr_l;
- u32 dbdmr_h;
- u32 dbdmr_l;
- u32 bsr;
- u32 bor;
- u32 bior;
- u8 res3[4];
- u32 iatr[4];
- u32 eccr; /* Exception control configuration register */
- u32 eicr;
- u8 res4[0x100-0xf8];
-} __attribute__ ((packed)) rsp_t;
-
-typedef struct qe_immap {
- qe_iram_t iram; /* I-RAM */
- qe_ic_t ic; /* Interrupt Controller */
- cp_qe_t cp; /* Communications Processor */
- qe_mux_t qmx; /* QE Multiplexer */
- qe_timers_t qet; /* QE Timers */
- spi_t spi[0x2]; /* spi */
- mcc_t mcc; /* mcc */
- qe_brg_t brg; /* brg */
- usb_t usb; /* USB */
- si1_t si1; /* SI */
- u8 res11[0x800];
- sir_t sir; /* SI Routing Tables */
- ucc_t ucc1; /* ucc1 */
- ucc_t ucc3; /* ucc3 */
- ucc_t ucc5; /* ucc5 */
- ucc_t ucc7; /* ucc7 */
- u8 res12[0x600];
- upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
- ucc_t ucc2; /* ucc2 */
- ucc_t ucc4; /* ucc4 */
- ucc_t ucc6; /* ucc6 */
- ucc_t ucc8; /* ucc8 */
- u8 res13[0x600];
- upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
- sdma_t sdma; /* SDMA */
- dbg_t dbg; /* Debug Space */
- rsp_t rsp[0x2]; /* RISC Special Registers
- * (Trap and Breakpoint) */
- u8 res14[0x300];
- u8 res15[0x3A00];
- u8 res16[0x8000]; /* 0x108000 - 0x110000 */
-#if defined(CONFIG_MPC8568)
- u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */
- u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */
-#elif defined(CONFIG_MPC8569)
- u8 muram[0x20000]; /* 0x1_0000 - 0x3_0000 Multi-user RAM */
- u8 res17[0x10000]; /* 0x3_0000 - 0x4_0000 */
-#else
- u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
- u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
- u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
-#endif
-} __attribute__ ((packed)) qe_map_t;
-
-extern qe_map_t *qe_immr;
-
-#if defined(CONFIG_MPC8568)
-#define QE_MURAM_SIZE 0x10000UL
-#elif defined(CONFIG_MPC8569)
-#define QE_MURAM_SIZE 0x20000UL
-#elif defined(CONFIG_MPC8360)
-#define QE_MURAM_SIZE 0xc000UL
-#elif defined(CONFIG_MPC832x)
-#define QE_MURAM_SIZE 0x4000UL
-#endif
-
-#if defined(CONFIG_MPC8323)
-#define MAX_QE_RISC 1
-#define QE_NUM_OF_SNUM 28
-#elif defined(CONFIG_MPC8569)
-#define MAX_QE_RISC 4
-#define QE_NUM_OF_SNUM 46
-#else
-#define MAX_QE_RISC 2
-#define QE_NUM_OF_SNUM 28
-#endif
-
-#endif /* __IMMAP_QE_H__ */
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef INTERRUPT_H
-#define INTERRUPT_H
-
-#if defined(CONFIG_XILINX_440)
-#include <asm/xilinx_irq.h>
-#else
-#include <asm/ppc4xx-uic.h>
-#endif
-
-void pic_enable(void);
-void pic_irq_enable(unsigned int irq);
-void pic_irq_disable(unsigned int irq);
-void pic_irq_ack(unsigned int irq);
-void external_interrupt(struct pt_regs *regs);
-void interrupt_run_handler(int vec);
-
-#endif
+++ /dev/null
-/* originally from linux source.
- * removed the dependencies on CONFIG_ values
- * removed virt_to_phys stuff (and in fact everything surrounded by #if __KERNEL__)
- * Modified By Rob Taylor, Flying Pig Systems, 2000
- */
-
-#ifndef _PPC_IO_H
-#define _PPC_IO_H
-
-#include <linux/config.h>
-#include <asm/byteorder.h>
-
-#ifdef CONFIG_ADDR_MAP
-#include <addr_map.h>
-#endif
-
-#define SIO_CONFIG_RA 0x398
-#define SIO_CONFIG_RD 0x399
-
-#ifndef _IO_BASE
-#define _IO_BASE 0
-#endif
-
-#define readb(addr) in_8((volatile u8 *)(addr))
-#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
-#if !defined(__BIG_ENDIAN)
-#define readw(addr) (*(volatile u16 *) (addr))
-#define readl(addr) (*(volatile u32 *) (addr))
-#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
-#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
-#else
-#define readw(addr) in_le16((volatile u16 *)(addr))
-#define readl(addr) in_le32((volatile u32 *)(addr))
-#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
-#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
-#endif
-
-/*
- * The insw/outsw/insl/outsl macros don't do byte-swapping.
- * They are only used in practice for transferring buffers which
- * are arrays of bytes, and byte-swapping is not appropriate in
- * that case. - paulus
- */
-#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns))
-#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns))
-#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
-#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
-#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
-#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
-
-#define inb(port) in_8((u8 *)((port)+_IO_BASE))
-#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
-#if !defined(__BIG_ENDIAN)
-#define inw(port) in_be16((u16 *)((port)+_IO_BASE))
-#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val))
-#define inl(port) in_be32((u32 *)((port)+_IO_BASE))
-#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val))
-#else
-#define inw(port) in_le16((u16 *)((port)+_IO_BASE))
-#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
-#define inl(port) in_le32((u32 *)((port)+_IO_BASE))
-#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
-#endif
-
-#define inb_p(port) in_8((u8 *)((port)+_IO_BASE))
-#define outb_p(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
-#define inw_p(port) in_le16((u16 *)((port)+_IO_BASE))
-#define outw_p(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
-#define inl_p(port) in_le32((u32 *)((port)+_IO_BASE))
-#define outl_p(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
-
-extern void _insb(volatile u8 *port, void *buf, int ns);
-extern void _outsb(volatile u8 *port, const void *buf, int ns);
-extern void _insw(volatile u16 *port, void *buf, int ns);
-extern void _outsw(volatile u16 *port, const void *buf, int ns);
-extern void _insl(volatile u32 *port, void *buf, int nl);
-extern void _outsl(volatile u32 *port, const void *buf, int nl);
-extern void _insw_ns(volatile u16 *port, void *buf, int ns);
-extern void _outsw_ns(volatile u16 *port, const void *buf, int ns);
-extern void _insl_ns(volatile u32 *port, void *buf, int nl);
-extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
-
-/*
- * The *_ns versions below don't do byte-swapping.
- * Neither do the standard versions now, these are just here
- * for older code.
- */
-#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
-#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
-#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
-#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
-
-
-#define IO_SPACE_LIMIT ~0
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-/*
- * Enforce In-order Execution of I/O:
- * Acts as a barrier to ensure all previous I/O accesses have
- * completed before any further ones are issued.
- */
-static inline void eieio(void)
-{
- __asm__ __volatile__ ("eieio" : : : "memory");
-}
-
-static inline void sync(void)
-{
- __asm__ __volatile__ ("sync" : : : "memory");
-}
-
-static inline void isync(void)
-{
- __asm__ __volatile__ ("isync" : : : "memory");
-}
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r() eieio()
-#define iobarrier_w() eieio()
-
-/*
- * Non ordered and non-swapping "raw" accessors
- */
-#define __iomem
-#define PCI_FIX_ADDR(addr) (addr)
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
- return *(volatile unsigned short *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
- return *(volatile unsigned int *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v;
-}
-
-/*
- * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
- *
- * Read operations have additional twi & isync to make sure the read
- * is actually performed (i.e. the data has come back) before we start
- * executing any following instructions.
- */
-extern inline int in_8(const volatile unsigned char __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__(
- "sync; lbz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_8(volatile unsigned char __iomem *addr, int val)
-{
- __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
-}
-
-extern inline int in_le16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline int in_be16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-
-extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-
-/* Clear and set bits in one shot. These macros can be used to clear and
- * set multiple bits in a register using a single call. These macros can
- * also be used to set a multiple-bit bit pattern using a mask, by
- * specifying the mask in the 'clear' parameter and the new bit pattern
- * in the 'set' parameter.
- */
-
-#define clrbits(type, addr, clear) \
- out_##type((addr), in_##type(addr) & ~(clear))
-
-#define setbits(type, addr, set) \
- out_##type((addr), in_##type(addr) | (set))
-
-#define clrsetbits(type, addr, clear, set) \
- out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
-
-#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
-#define setbits_be32(addr, set) setbits(be32, addr, set)
-#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
-
-#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
-#define setbits_le32(addr, set) setbits(le32, addr, set)
-#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
-
-#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
-#define setbits_be16(addr, set) setbits(be16, addr, set)
-#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
-
-#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
-#define setbits_le16(addr, set) setbits(le16, addr, set)
-#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
-
-#define clrbits_8(addr, clear) clrbits(8, addr, clear)
-#define setbits_8(addr, set) setbits(8, addr, set)
-#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-#define MAP_NOCACHE (0)
-#define MAP_WRCOMBINE (0)
-#define MAP_WRBACK (0)
-#define MAP_WRTHROUGH (0)
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
-#ifdef CONFIG_ADDR_MAP
- return (void *)(addrmap_phys_to_virt(paddr));
-#else
- return (void *)((unsigned long)paddr);
-#endif
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
-#ifdef CONFIG_ADDR_MAP
- return addrmap_virt_to_phys(vaddr);
-#else
- return (phys_addr_t)((unsigned long)vaddr);
-#endif
-}
-
-#endif
+++ /dev/null
-/*
- * MPC8260 I/O port pin manipulation functions
- */
-
-#ifndef _ASM_IOPIN_8260_H_
-#define _ASM_IOPIN_8260_H_
-
-#include <linux/types.h>
-#include <asm/immap_8260.h>
-
-#ifdef __KERNEL__
-
-typedef
- struct {
- u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
- u_char pin:5; /* port pin (0-31) */
- u_char flag:1; /* for whatever */
- }
-iopin_t;
-
-#define IOPIN_PORTA 0
-#define IOPIN_PORTB 1
-#define IOPIN_PORTC 2
-#define IOPIN_PORTD 3
-
-extern __inline__ void
-iopin_set_high(iopin_t *iopin)
-{
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
- datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void
-iopin_set_low(iopin_t *iopin)
-{
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
- datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint
-iopin_is_high(iopin_t *iopin)
-{
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
- return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint
-iopin_is_low(iopin_t *iopin)
-{
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
- return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void
-iopin_set_out(iopin_t *iopin)
-{
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
- dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void
-iopin_set_in(iopin_t *iopin)
-{
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
- dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint
-iopin_is_out(iopin_t *iopin)
-{
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
- return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint
-iopin_is_in(iopin_t *iopin)
-{
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
- return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void
-iopin_set_odr(iopin_t *iopin)
-{
- volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
- odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void
-iopin_set_act(iopin_t *iopin)
-{
- volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
- odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint
-iopin_is_odr(iopin_t *iopin)
-{
- volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
- return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint
-iopin_is_act(iopin_t *iopin)
-{
- volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
- return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void
-iopin_set_ded(iopin_t *iopin)
-{
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
- parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void
-iopin_set_gen(iopin_t *iopin)
-{
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
- parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint
-iopin_is_ded(iopin_t *iopin)
-{
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
- return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint
-iopin_is_gen(iopin_t *iopin)
-{
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
- return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void
-iopin_set_opt2(iopin_t *iopin)
-{
- volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
- sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void
-iopin_set_opt1(iopin_t *iopin)
-{
- volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
- sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint
-iopin_is_opt2(iopin_t *iopin)
-{
- volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
- return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint
-iopin_is_opt1(iopin_t *iopin)
-{
- volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
- return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IOPIN_8260_H_ */
+++ /dev/null
-/*
- * MPC85xx I/O port pin manipulation functions
- */
-
-#ifndef _ASM_IOPIN_85xx_H_
-#define _ASM_IOPIN_85xx_H_
-
-#include <linux/types.h>
-#include <asm/immap_85xx.h>
-
-#ifdef __KERNEL__
-
-typedef struct {
- u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
- u_char pin:5; /* port pin (0-31) */
- u_char flag:1; /* for whatever */
-} iopin_t;
-
-#define IOPIN_PORTA 0
-#define IOPIN_PORTB 1
-#define IOPIN_PORTC 2
-#define IOPIN_PORTD 3
-
-extern __inline__ void iopin_set_high (iopin_t * iopin)
-{
- volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
- datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void iopin_set_low (iopin_t * iopin)
-{
- volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
- datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint iopin_is_high (iopin_t * iopin)
-{
- volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
- return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint iopin_is_low (iopin_t * iopin)
-{
- volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
- return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void iopin_set_out (iopin_t * iopin)
-{
- volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
- dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void iopin_set_in (iopin_t * iopin)
-{
- volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
- dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint iopin_is_out (iopin_t * iopin)
-{
- volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
- return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint iopin_is_in (iopin_t * iopin)
-{
- volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
- return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void iopin_set_odr (iopin_t * iopin)
-{
- volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
- odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void iopin_set_act (iopin_t * iopin)
-{
- volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
- odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint iopin_is_odr (iopin_t * iopin)
-{
- volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
- return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint iopin_is_act (iopin_t * iopin)
-{
- volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
- return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void iopin_set_ded (iopin_t * iopin)
-{
- volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
- parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void iopin_set_gen (iopin_t * iopin)
-{
- volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
- parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint iopin_is_ded (iopin_t * iopin)
-{
- volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
- return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint iopin_is_gen (iopin_t * iopin)
-{
- volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
- return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-extern __inline__ void iopin_set_opt2 (iopin_t * iopin)
-{
- volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
- sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
-}
-
-extern __inline__ void iopin_set_opt1 (iopin_t * iopin)
-{
- volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
- sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
-}
-
-extern __inline__ uint iopin_is_opt2 (iopin_t * iopin)
-{
- volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
- return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
-}
-
-extern __inline__ uint iopin_is_opt1 (iopin_t * iopin)
-{
- volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
- return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IOPIN_85xx_H_ */
+++ /dev/null
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8xx I/O port pin manipulation functions
- * Roughly based on iopin_8260.h
- */
-
-#ifndef _ASM_IOPIN_8XX_H_
-#define _ASM_IOPIN_8XX_H_
-
-#include <linux/types.h>
-#include <asm/8xx_immap.h>
-
-#ifdef __KERNEL__
-
-typedef struct {
- u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
- u_char pin:5; /* port pin (0-31) */
- u_char flag:1; /* for whatever */
-} iopin_t;
-
-#define IOPIN_PORTA 0
-#define IOPIN_PORTB 1
-#define IOPIN_PORTC 2
-#define IOPIN_PORTD 3
-
-extern __inline__ void
-iopin_set_high(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
- *datp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
- *datp |= (1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
- *datp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
- *datp |= (1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_low(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
- *datp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
- *datp &= ~(1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
- *datp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
- *datp &= ~(1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_high(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
- return (*datp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
- return (*datp >> (31 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
- return (*datp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
- return (*datp >> (15 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_low(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
- return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
- return ((*datp >> (31 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
- return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
- return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-extern __inline__ void
-iopin_set_out(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
- *dirp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
- *dirp |= (1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
- *dirp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
- *dirp |= (1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_in(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
- *dirp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
- *dirp &= ~(1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
- *dirp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
- *dirp &= ~(1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_out(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
- return (*dirp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
- return (*dirp >> (31 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
- return (*dirp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
- return (*dirp >> (15 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_in(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
- return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
- return ((*dirp >> (31 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
- return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
- return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-extern __inline__ void
-iopin_set_odr(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
- *odrp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
- *odrp |= (1 << (31 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_act(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
- *odrp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
- *odrp &= ~(1 << (31 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_odr(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
- return (*odrp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
- return (*odrp >> (31 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_act(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
- return ((*odrp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
- return ((*odrp >> (31 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-extern __inline__ void
-iopin_set_ded(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
- *parp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
- *parp |= (1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
- *parp |= (1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
- *parp |= (1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_gen(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
- *parp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
- *parp &= ~(1 << (31 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
- *parp &= ~(1 << (15 - iopin->pin));
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
- *parp &= ~(1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_ded(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
- return (*parp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
- return (*parp >> (31 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
- return (*parp >> (15 - iopin->pin)) & 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
- return (*parp >> (15 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_gen(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTA) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
- return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTB) {
- volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
- return ((*parp >> (31 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTC) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
- return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
- } else if (iopin->port == IOPIN_PORTD) {
- volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
- return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-extern __inline__ void
-iopin_set_opt2(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
- *sorp |= (1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_opt1(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
- *sorp &= ~(1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_opt2(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
- return (*sorp >> (15 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_opt1(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
- return ((*sorp >> (15 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-extern __inline__ void
-iopin_set_falledge(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
- *intp |= (1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ void
-iopin_set_anyedge(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
- *intp &= ~(1 << (15 - iopin->pin));
- }
-}
-
-extern __inline__ uint
-iopin_is_falledge(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
- return (*intp >> (15 - iopin->pin)) & 1;
- }
- return 0;
-}
-
-extern __inline__ uint
-iopin_is_anyedge(iopin_t *iopin)
-{
- if (iopin->port == IOPIN_PORTC) {
- volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
- return ((*intp >> (15 - iopin->pin)) & 1) ^ 1;
- }
- return 0;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IOPIN_8XX_H_ */
+++ /dev/null
-
-#ifndef _PPC_KERNEL_M8260_PCI_H
-#define _PPC_KERNEL_M8260_PCI_H
-
-#define M8265_PCIBR0 0x101ac
-#define M8265_PCIBR1 0x101b0
-#define M8265_PCIMSK0 0x101c4
-#define M8265_PCIMSK1 0x101c8
-
-/* Bit definitions for PCIBR registers */
-
-#define PCIBR_ENABLE 0x00000001
-
-/* Bit definitions for PCIMSK registers */
-
-#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
-#define PCIMSK_64KB 0xFFFF0000
-#define PCIMSK_128KB 0xFFFE0000
-#define PCIMSK_256KB 0xFFFC0000
-#define PCIMSK_512KB 0xFFF80000
-#define PCIMSK_1MB 0xFFF00000
-#define PCIMSK_2MB 0xFFE00000
-#define PCIMSK_4MB 0xFFC00000
-#define PCIMSK_8MB 0xFF800000
-#define PCIMSK_16MB 0xFF000000
-#define PCIMSK_32MB 0xFE000000
-#define PCIMSK_64MB 0xFC000000
-#define PCIMSK_128MB 0xF8000000
-#define PCIMSK_256MB 0xF0000000
-#define PCIMSK_512MB 0xE0000000
-#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
-
-
-#define M826X_SCCR_PCI_MODE_EN 0x100
-
-
-/*
- * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
- * addresses are translated to PCI addresses when the MPC826x is a PCI bus
- * master (initiator).
- */
-
-#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
-#define POTAR_REG1 0x10818
-#define POTAR_REG2 0x10830
-
-#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
-#define POBAR_REG1 0x10820
-#define POBAR_REG2 0x10838
-
-#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
-#define POCMR_REG1 0x10828
-#define POCMR_REG2 0x10840
-
-/* Bit definitions for POMCR registers */
-
-#define POCMR_MASK_4KB 0x000FFFFF
-#define POCMR_MASK_8KB 0x000FFFFE
-#define POCMR_MASK_16KB 0x000FFFFC
-#define POCMR_MASK_32KB 0x000FFFF8
-#define POCMR_MASK_64KB 0x000FFFF0
-#define POCMR_MASK_128KB 0x000FFFE0
-#define POCMR_MASK_256KB 0x000FFFC0
-#define POCMR_MASK_512KB 0x000FFF80
-#define POCMR_MASK_1MB 0x000FFF00
-#define POCMR_MASK_2MB 0x000FFE00
-#define POCMR_MASK_4MB 0x000FFC00
-#define POCMR_MASK_8MB 0x000FF800
-#define POCMR_MASK_16MB 0x000FF000
-#define POCMR_MASK_32MB 0x000FE000
-#define POCMR_MASK_64MB 0x000FC000
-#define POCMR_MASK_128MB 0x000F8000
-#define POCMR_MASK_256MB 0x000F0000
-#define POCMR_MASK_512MB 0x000E0000
-#define POCMR_MASK_1GB 0x000C0000
-
-#define POCMR_ENABLE 0x80000000
-#define POCMR_PCI_IO 0x40000000
-#define POCMR_PREFETCH_EN 0x20000000
-
-/* Soft PCI reset */
-
-#define PCI_GCR_REG 0x10880
-
-/* Bit definitions for PCI_GCR registers */
-
-#define PCIGCR_PCI_BUS_EN 0x1
-
-/*
- * Inbound ATU registers (2 sets). These registers control how PCI addresses
- * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
- */
-
-#define PITAR_REG1 0x108D0
-#define PIBAR_REG1 0x108D8
-#define PICMR_REG1 0x108E0
-#define PITAR_REG0 0x108E8
-#define PIBAR_REG0 0x108F0
-#define PICMR_REG0 0x108F8
-
-/* Bit definitions for PCI Inbound Comparison Mask registers */
-
-#define PICMR_MASK_4KB 0x000FFFFF
-#define PICMR_MASK_8KB 0x000FFFFE
-#define PICMR_MASK_16KB 0x000FFFFC
-#define PICMR_MASK_32KB 0x000FFFF8
-#define PICMR_MASK_64KB 0x000FFFF0
-#define PICMR_MASK_128KB 0x000FFFE0
-#define PICMR_MASK_256KB 0x000FFFC0
-#define PICMR_MASK_512KB 0x000FFF80
-#define PICMR_MASK_1MB 0x000FFF00
-#define PICMR_MASK_2MB 0x000FFE00
-#define PICMR_MASK_4MB 0x000FFC00
-#define PICMR_MASK_8MB 0x000FF800
-#define PICMR_MASK_16MB 0x000FF000
-#define PICMR_MASK_32MB 0x000FE000
-#define PICMR_MASK_64MB 0x000FC000
-#define PICMR_MASK_128MB 0x000F8000
-#define PICMR_MASK_256MB 0x000F0000
-#define PICMR_MASK_512MB 0x000E0000
-#define PICMR_MASK_1GB 0x000C0000
-
-#define PICMR_ENABLE 0x80000000
-#define PICMR_NO_SNOOP_EN 0x40000000
-#define PICMR_PREFETCH_EN 0x20000000
-
-/* PCI error Registers */
-
-#define PCI_ERROR_STATUS_REG 0x10884
-#define PCI_ERROR_MASK_REG 0x10888
-#define PCI_ERROR_CONTROL_REG 0x1088C
-#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
-#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
-#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
-
-/* PCI error Register bit defines */
-
-#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
-#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
-#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
-#define PCI_ERROR_PCI_NO_RSP 0x00000008
-#define PCI_ERROR_PCI_TAR_ABT 0x00000010
-#define PCI_ERROR_PCI_SERR 0x00000020
-#define PCI_ERROR_PCI_PERR_RD 0x00000040
-#define PCI_ERROR_PCI_PERR_WR 0x00000080
-#define PCI_ERROR_I2O_OFQO 0x00000100
-#define PCI_ERROR_I2O_IPQO 0x00000200
-#define PCI_ERROR_IRA 0x00000400
-#define PCI_ERROR_NMI 0x00000800
-#define PCI_ERROR_I2O_DBMC 0x00001000
-
-/*
- * Register pair used to generate configuration cycles on the PCI bus
- * and access the MPC826x's own PCI configuration registers.
- */
-
-#define PCI_CFG_ADDR_REG 0x10900
-#define PCI_CFG_DATA_REG 0x10904
-
-/* Bus parking decides where the bus control sits when idle */
-/* If modifying memory controllers for PCI park on the core */
-
-#define PPC_ACR_BUS_PARK_CORE 0x6
-#define PPC_ACR_BUS_PARK_PCI 0x3
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef __ASM_PPC_MC146818RTC_H
-#define __ASM_PPC_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* __ASM_PPC_MC146818RTC_H */
+++ /dev/null
-/*
- * PowerPC memory management structures
- */
-
-#ifndef _PPC_MMU_H_
-#define _PPC_MMU_H_
-
-#include <linux/config.h>
-
-#ifndef __ASSEMBLY__
-/* Hardware Page Table Entry */
-typedef struct _PTE {
-#ifdef CONFIG_PPC64BRIDGE
- unsigned long long vsid:52;
- unsigned long api:5;
- unsigned long :5;
- unsigned long h:1;
- unsigned long v:1;
- unsigned long long rpn:52;
-#else /* CONFIG_PPC64BRIDGE */
- unsigned long v:1; /* Entry is valid */
- unsigned long vsid:24; /* Virtual segment identifier */
- unsigned long h:1; /* Hash algorithm indicator */
- unsigned long api:6; /* Abbreviated page index */
- unsigned long rpn:20; /* Real (physical) page number */
-#endif /* CONFIG_PPC64BRIDGE */
- unsigned long :3; /* Unused */
- unsigned long r:1; /* Referenced */
- unsigned long c:1; /* Changed */
- unsigned long w:1; /* Write-thru cache mode */
- unsigned long i:1; /* Cache inhibited */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page protection */
-} PTE;
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-#define PP_RWXX 0 /* Supervisor read/write, User none */
-#define PP_RWRX 1 /* Supervisor read/write, User read */
-#define PP_RWRW 2 /* Supervisor read/write, User read/write */
-#define PP_RXRX 3 /* Supervisor read, User read */
-
-/* Segment Register */
-typedef struct _SEGREG {
- unsigned long t:1; /* Normal or I/O type */
- unsigned long ks:1; /* Supervisor 'key' (normally 0) */
- unsigned long kp:1; /* User 'key' (normally 1) */
- unsigned long n:1; /* No-execute */
- unsigned long :4; /* Unused */
- unsigned long vsid:24; /* Virtual Segment Identifier */
-} SEGREG;
-
-/* Block Address Translation (BAT) Registers */
-typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :8; /* unused */
- unsigned long w:1;
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long ks:1; /* Supervisor key (normally 0) */
- unsigned long kp:1; /* User key (normally 1) */
- unsigned long pp:2; /* Page access protections */
-} P601_BATU;
-
-typedef struct _BATU { /* Upper part of BAT (all except 601) */
-#ifdef CONFIG_PPC64BRIDGE
- unsigned long long bepi:47;
-#else /* CONFIG_PPC64BRIDGE */
- unsigned long bepi:15; /* Effective page index (virtual address) */
-#endif /* CONFIG_PPC64BRIDGE */
- unsigned long :4; /* Unused */
- unsigned long bl:11; /* Block size mask */
- unsigned long vs:1; /* Supervisor valid */
- unsigned long vp:1; /* User valid */
-} BATU;
-
-typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long v:1; /* Valid bit */
- unsigned long bl:6; /* Block size mask */
-} P601_BATL;
-
-typedef struct _BATL { /* Lower part of BAT (all except 601) */
-#ifdef CONFIG_PPC64BRIDGE
- unsigned long long brpn:47;
-#else /* CONFIG_PPC64BRIDGE */
- unsigned long brpn:15; /* Real page index (physical address) */
-#endif /* CONFIG_PPC64BRIDGE */
- unsigned long :10; /* Unused */
- unsigned long w:1; /* Write-thru cache */
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded (MBZ in IBAT) */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page access protections */
-} BATL;
-
-typedef struct _BAT {
- BATU batu; /* Upper register */
- BATL batl; /* Lower register */
-} BAT;
-
-typedef struct _P601_BAT {
- P601_BATU batu; /* Upper register */
- P601_BATL batl; /* Lower register */
-} P601_BAT;
-
-/*
- * Simulated two-level MMU. This structure is used by the kernel
- * to keep track of MMU mappings and is used to update/maintain
- * the hardware HASH table which is really a cache of mappings.
- *
- * The simulated structures mimic the hardware available on other
- * platforms, notably the 80x86 and 680x0.
- */
-
-typedef struct _pte {
- unsigned long page_num:20;
- unsigned long flags:12; /* Page flags (some unused bits) */
-} pte;
-
-#define PD_SHIFT (10+12) /* Page directory */
-#define PD_MASK 0x02FF
-#define PT_SHIFT (12) /* Page Table */
-#define PT_MASK 0x02FF
-#define PG_SHIFT (12) /* Page Entry */
-
-
-/* MMU context */
-
-typedef struct _MMU_context {
- SEGREG segs[16]; /* Segment registers */
- pte **pmap; /* Two-level page-map structure */
-} MMU_context;
-
-extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
-extern void _tlbia(void); /* invalidate all TLB entries */
-
-#ifdef CONFIG_ADDR_MAP
-extern void init_addr_map(void);
-#endif
-
-typedef enum {
- IBAT0 = 0, IBAT1, IBAT2, IBAT3,
- DBAT0, DBAT1, DBAT2, DBAT3,
-#ifdef CONFIG_HIGH_BATS
- IBAT4, IBAT5, IBAT6, IBAT7,
- DBAT4, DBAT5, DBAT6, DBAT7
-#endif
-} ppc_bat_t;
-
-extern int read_bat(ppc_bat_t bat, unsigned long *upper, unsigned long *lower);
-extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
-extern void print_bats(void);
-
-#endif /* __ASSEMBLY__ */
-
-#define BATU_VS 0x00000002
-#define BATU_VP 0x00000001
-#define BATU_INVALID 0x00000000
-
-#define BATL_WRITETHROUGH 0x00000040
-#define BATL_CACHEINHIBIT 0x00000020
-#define BATL_MEMCOHERENCE 0x00000010
-#define BATL_GUARDEDSTORAGE 0x00000008
-#define BATL_NO_ACCESS 0x00000000
-
-#define BATL_PP_MSK 0x00000003
-#define BATL_PP_00 0x00000000 /* No access */
-#define BATL_PP_01 0x00000001 /* Read-only */
-#define BATL_PP_10 0x00000002 /* Read-write */
-#define BATL_PP_11 0x00000003
-
-#define BATL_PP_NO_ACCESS BATL_PP_00
-#define BATL_PP_RO BATL_PP_01
-#define BATL_PP_RW BATL_PP_10
-
-/* BAT Block size values */
-#define BATU_BL_128K 0x00000000
-#define BATU_BL_256K 0x00000004
-#define BATU_BL_512K 0x0000000c
-#define BATU_BL_1M 0x0000001c
-#define BATU_BL_2M 0x0000003c
-#define BATU_BL_4M 0x0000007c
-#define BATU_BL_8M 0x000000fc
-#define BATU_BL_16M 0x000001fc
-#define BATU_BL_32M 0x000003fc
-#define BATU_BL_64M 0x000007fc
-#define BATU_BL_128M 0x00000ffc
-#define BATU_BL_256M 0x00001ffc
-
-/* Block lengths for processors that support extended block length */
-#ifdef HID0_XBSEN
-#define BATU_BL_512M 0x00003ffc
-#define BATU_BL_1G 0x00007ffc
-#define BATU_BL_2G 0x0000fffc
-#define BATU_BL_4G 0x0001fffc
-#define BATU_BL_MAX BATU_BL_4G
-#else
-#define BATU_BL_MAX BATU_BL_256M
-#endif
-
-/* BAT Access Protection */
-#define BPP_XX 0x00 /* No access */
-#define BPP_RX 0x01 /* Read only */
-#define BPP_RW 0x02 /* Read/write */
-
-/* Macros to get values from BATs, once data is in the BAT register format */
-#define BATU_VALID(x) (x & 0x3)
-#define BATU_VADDR(x) (x & 0xfffe0000)
-#define BATL_PADDR(x) ((phys_addr_t)((x & 0xfffe0000) \
- | ((x & 0x0e00ULL) << 24) \
- | ((x & 0x04ULL) << 30)))
-#define BATU_SIZE(x) (1ULL << (fls((x & BATU_BL_MAX) >> 2) + 17))
-
-/* bytes into BATU_BL */
-#define TO_BATU_BL(x) \
- (u32)((((1ull << __ilog2_u64((u64)x)) / (128 * 1024)) - 1) * 4)
-
-/* Used to set up SDR1 register */
-#define HASH_TABLE_SIZE_64K 0x00010000
-#define HASH_TABLE_SIZE_128K 0x00020000
-#define HASH_TABLE_SIZE_256K 0x00040000
-#define HASH_TABLE_SIZE_512K 0x00080000
-#define HASH_TABLE_SIZE_1M 0x00100000
-#define HASH_TABLE_SIZE_2M 0x00200000
-#define HASH_TABLE_SIZE_4M 0x00400000
-#define HASH_TABLE_MASK_64K 0x000
-#define HASH_TABLE_MASK_128K 0x001
-#define HASH_TABLE_MASK_256K 0x003
-#define HASH_TABLE_MASK_512K 0x007
-#define HASH_TABLE_MASK_1M 0x00F
-#define HASH_TABLE_MASK_2M 0x01F
-#define HASH_TABLE_MASK_4M 0x03F
-
-/* Control/status registers for the MPC8xx.
- * A write operation to these registers causes serialized access.
- * During software tablewalk, the registers used perform mask/shift-add
- * operations when written/read. A TLB entry is created when the Mx_RPN
- * is written, and the contents of several registers are used to
- * create the entry.
- */
-#define MI_CTR 784 /* Instruction TLB control register */
-#define MI_GPM 0x80000000 /* Set domain manager mode */
-#define MI_PPM 0x40000000 /* Set subpage protection */
-#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MI_RESETVAL 0x00000000 /* Value of register at reset */
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define MI_AP 786
-#define MI_Ks 0x80000000 /* Should not be set */
-#define MI_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define MI_EPN 787
-#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MI_EVALID 0x00000200 /* Entry is valid */
-#define MI_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define MI_TWC 789
-#define MI_APG 0x000001e0 /* Access protection group (0) */
-#define MI_GUARDED 0x00000010 /* Guarded storage */
-#define MI_PSMASK 0x0000000c /* Mask of page size bits */
-#define MI_PS8MEG 0x0000000c /* 8M page size */
-#define MI_PS512K 0x00000004 /* 512K page size */
-#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MI_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define MI_RPN 790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization. This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT 0x000001fd
-
-#define MD_CTR 792 /* Data TLB control register */
-#define MD_GPM 0x80000000 /* Set domain manager mode */
-#define MD_PPM 0x40000000 /* Set subpage protection */
-#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
-#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
-#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MD_RESETVAL 0x04000000 /* Value of register at reset */
-
-#define M_CASID 793 /* Address space ID (context) to match */
-#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
-
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define MD_AP 794
-#define MD_Ks 0x80000000 /* Should not be set */
-#define MD_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define MD_EPN 795
-#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MD_EVALID 0x00000200 /* Entry is valid */
-#define MD_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define M_TWB 796
-#define M_L1TB 0xfffff000 /* Level 1 table base address */
-#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written. It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define MD_TWC 797
-#define MD_L2TB 0xfffff000 /* Level 2 table base address */
-#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
-#define MD_APG 0x000001e0 /* Access protection group (0) */
-#define MD_GUARDED 0x00000010 /* Guarded storage */
-#define MD_PSMASK 0x0000000c /* Mask of page size bits */
-#define MD_PS8MEG 0x0000000c /* 8M page size */
-#define MD_PS512K 0x00000004 /* 512K page size */
-#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MD_WT 0x00000002 /* Use writethrough page attribute */
-#define MD_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define MD_RPN 798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
- */
-#define M_TW 799
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully- associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively.
- */
-
-#define PPC4XX_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion. On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-/*
- * FSL Book-E support
- */
-
-#define MAS0_TLBSEL_MSK 0x30000000
-#define MAS0_TLBSEL(x) ((x << 28) & MAS0_TLBSEL_MSK)
-#define MAS0_ESEL_MSK 0x0FFF0000
-#define MAS0_ESEL(x) ((x << 16) & MAS0_ESEL_MSK)
-#define MAS0_NV(x) ((x) & 0x00000FFF)
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
-
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL 0x000F0000
-#define MAS4_TSIZED(x) MAS1_TSIZE(x)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID0 0x3FFF0000
-#define MAS6_SPID1 0x00007FFE
-#define MAS6_SAS 0x00000001
-#define MAS6_SPID MAS6_SPID0
-
-#define MAS7_RPN 0xFFFFFFFF
-
-#define FSL_BOOKE_MAS0(tlbsel,esel,nv) \
- (MAS0_TLBSEL(tlbsel) | MAS0_ESEL(esel) | MAS0_NV(nv))
-#define FSL_BOOKE_MAS1(v,iprot,tid,ts,tsize) \
- ((((v) << 31) & MAS1_VALID) |\
- (((iprot) << 30) & MAS1_IPROT) |\
- (MAS1_TID(tid)) |\
- (((ts) << 12) & MAS1_TS) |\
- (MAS1_TSIZE(tsize)))
-#define FSL_BOOKE_MAS2(epn, wimge) \
- (((epn) & MAS3_RPN) | (wimge))
-#define FSL_BOOKE_MAS3(rpn, user, perms) \
- (((rpn) & MAS3_RPN) | (user) | (perms))
-#define FSL_BOOKE_MAS7(rpn) \
- (((u64)(rpn)) >> 32)
-
-#define BOOKE_PAGESZ_1K 0
-#define BOOKE_PAGESZ_4K 1
-#define BOOKE_PAGESZ_16K 2
-#define BOOKE_PAGESZ_64K 3
-#define BOOKE_PAGESZ_256K 4
-#define BOOKE_PAGESZ_1M 5
-#define BOOKE_PAGESZ_4M 6
-#define BOOKE_PAGESZ_16M 7
-#define BOOKE_PAGESZ_64M 8
-#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1G 10
-#define BOOKE_PAGESZ_4G 11
-#define BOOKE_PAGESZ_16GB 12
-#define BOOKE_PAGESZ_64GB 13
-#define BOOKE_PAGESZ_256GB 14
-#define BOOKE_PAGESZ_1TB 15
-
-#ifdef CONFIG_E500
-#ifndef __ASSEMBLY__
-extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
- u8 perms, u8 wimge,
- u8 ts, u8 esel, u8 tsize, u8 iprot);
-extern void disable_tlb(u8 esel);
-extern void invalidate_tlb(u8 tlb);
-extern void init_tlbs(void);
-extern int find_tlb_idx(void *addr, u8 tlbsel);
-extern void init_used_tlb_cams(void);
-extern int find_free_tlbcam(void);
-
-extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
-
-extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
-
-#define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
- { .mas0 = FSL_BOOKE_MAS0(_tlb, _esel, 0), \
- .mas1 = FSL_BOOKE_MAS1(1, _iprot, 0, _ts, _sz), \
- .mas2 = FSL_BOOKE_MAS2(_epn, _wimge), \
- .mas3 = FSL_BOOKE_MAS3(_rpn, 0, _perms), \
- .mas7 = FSL_BOOKE_MAS7(_rpn), }
-
-struct fsl_e_tlb_entry {
- u32 mas0;
- u32 mas1;
- u32 mas2;
- u32 mas3;
- u32 mas7;
-};
-
-extern struct fsl_e_tlb_entry tlb_table[];
-extern int num_tlb_entries;
-#endif
-#endif
-
-#ifdef CONFIG_E300
-#define LAWAR_EN 0x80000000
-#define LAWAR_SIZE 0x0000003F
-
-#define LAWAR_TRGT_IF_PCI 0x00000000
-#define LAWAR_TRGT_IF_PCI1 0x00000000
-#define LAWAR_TRGT_IF_PCIX 0x00000000
-#define LAWAR_TRGT_IF_PCI2 0x00100000
-#define LAWAR_TRGT_IF_PCIE1 0x00200000
-#define LAWAR_TRGT_IF_PCIE2 0x00100000
-#define LAWAR_TRGT_IF_PCIE3 0x00300000
-#define LAWAR_TRGT_IF_LBC 0x00400000
-#define LAWAR_TRGT_IF_CCSR 0x00800000
-#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
-#define LAWAR_TRGT_IF_RIO 0x00c00000
-#define LAWAR_TRGT_IF_DDR 0x00f00000
-#define LAWAR_TRGT_IF_DDR1 0x00f00000
-#define LAWAR_TRGT_IF_DDR2 0x01600000
-
-#define LAWAR_SIZE_BASE 0xa
-#define LAWAR_SIZE_4K (LAWAR_SIZE_BASE+1)
-#define LAWAR_SIZE_8K (LAWAR_SIZE_BASE+2)
-#define LAWAR_SIZE_16K (LAWAR_SIZE_BASE+3)
-#define LAWAR_SIZE_32K (LAWAR_SIZE_BASE+4)
-#define LAWAR_SIZE_64K (LAWAR_SIZE_BASE+5)
-#define LAWAR_SIZE_128K (LAWAR_SIZE_BASE+6)
-#define LAWAR_SIZE_256K (LAWAR_SIZE_BASE+7)
-#define LAWAR_SIZE_512K (LAWAR_SIZE_BASE+8)
-#define LAWAR_SIZE_1M (LAWAR_SIZE_BASE+9)
-#define LAWAR_SIZE_2M (LAWAR_SIZE_BASE+10)
-#define LAWAR_SIZE_4M (LAWAR_SIZE_BASE+11)
-#define LAWAR_SIZE_8M (LAWAR_SIZE_BASE+12)
-#define LAWAR_SIZE_16M (LAWAR_SIZE_BASE+13)
-#define LAWAR_SIZE_32M (LAWAR_SIZE_BASE+14)
-#define LAWAR_SIZE_64M (LAWAR_SIZE_BASE+15)
-#define LAWAR_SIZE_128M (LAWAR_SIZE_BASE+16)
-#define LAWAR_SIZE_256M (LAWAR_SIZE_BASE+17)
-#define LAWAR_SIZE_512M (LAWAR_SIZE_BASE+18)
-#define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19)
-#define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20)
-#define LAWAR_SIZE_4G (LAWAR_SIZE_BASE+21)
-#define LAWAR_SIZE_8G (LAWAR_SIZE_BASE+22)
-#define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23)
-#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24)
-#endif
-
-#ifdef CONFIG_440
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
-#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
-#define TLB2(a) ((a) & 0x00000fbf)
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ;\
-0: mflr r0 ;\
- mtlr r1 ;\
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-/*----------------------------------------------------------------------------+
-| TLB specific defines.
-+----------------------------------------------------------------------------*/
-#define TLB_256MB_ALIGN_MASK 0xFF0000000ULL
-#define TLB_16MB_ALIGN_MASK 0xFFF000000ULL
-#define TLB_1MB_ALIGN_MASK 0xFFFF00000ULL
-#define TLB_256KB_ALIGN_MASK 0xFFFFC0000ULL
-#define TLB_64KB_ALIGN_MASK 0xFFFFF0000ULL
-#define TLB_16KB_ALIGN_MASK 0xFFFFFC000ULL
-#define TLB_4KB_ALIGN_MASK 0xFFFFFF000ULL
-#define TLB_1KB_ALIGN_MASK 0xFFFFFFC00ULL
-#define TLB_256MB_SIZE 0x10000000
-#define TLB_16MB_SIZE 0x01000000
-#define TLB_1MB_SIZE 0x00100000
-#define TLB_256KB_SIZE 0x00040000
-#define TLB_64KB_SIZE 0x00010000
-#define TLB_16KB_SIZE 0x00004000
-#define TLB_4KB_SIZE 0x00001000
-#define TLB_1KB_SIZE 0x00000400
-
-#define TLB_WORD0_EPN_MASK 0xFFFFFC00
-#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_V_MASK 0x00000200
-#define TLB_WORD0_V_ENABLE 0x00000200
-#define TLB_WORD0_V_DISABLE 0x00000000
-#define TLB_WORD0_TS_MASK 0x00000100
-#define TLB_WORD0_TS_1 0x00000100
-#define TLB_WORD0_TS_0 0x00000000
-#define TLB_WORD0_SIZE_MASK 0x000000F0
-#define TLB_WORD0_SIZE_1KB 0x00000000
-#define TLB_WORD0_SIZE_4KB 0x00000010
-#define TLB_WORD0_SIZE_16KB 0x00000020
-#define TLB_WORD0_SIZE_64KB 0x00000030
-#define TLB_WORD0_SIZE_256KB 0x00000040
-#define TLB_WORD0_SIZE_1MB 0x00000050
-#define TLB_WORD0_SIZE_16MB 0x00000070
-#define TLB_WORD0_SIZE_256MB 0x00000090
-#define TLB_WORD0_TPAR_MASK 0x0000000F
-#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD1_RPN_MASK 0xFFFFFC00
-#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_PAR1_MASK 0x00000300
-#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-#define TLB_WORD1_PAR1_0 0x00000000
-#define TLB_WORD1_PAR1_1 0x00000100
-#define TLB_WORD1_PAR1_2 0x00000200
-#define TLB_WORD1_PAR1_3 0x00000300
-#define TLB_WORD1_ERPN_MASK 0x0000000F
-#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD2_PAR2_MASK 0xC0000000
-#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
-#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
-#define TLB_WORD2_PAR2_0 0x00000000
-#define TLB_WORD2_PAR2_1 0x40000000
-#define TLB_WORD2_PAR2_2 0x80000000
-#define TLB_WORD2_PAR2_3 0xC0000000
-#define TLB_WORD2_U0_MASK 0x00008000
-#define TLB_WORD2_U0_ENABLE 0x00008000
-#define TLB_WORD2_U0_DISABLE 0x00000000
-#define TLB_WORD2_U1_MASK 0x00004000
-#define TLB_WORD2_U1_ENABLE 0x00004000
-#define TLB_WORD2_U1_DISABLE 0x00000000
-#define TLB_WORD2_U2_MASK 0x00002000
-#define TLB_WORD2_U2_ENABLE 0x00002000
-#define TLB_WORD2_U2_DISABLE 0x00000000
-#define TLB_WORD2_U3_MASK 0x00001000
-#define TLB_WORD2_U3_ENABLE 0x00001000
-#define TLB_WORD2_U3_DISABLE 0x00000000
-#define TLB_WORD2_W_MASK 0x00000800
-#define TLB_WORD2_W_ENABLE 0x00000800
-#define TLB_WORD2_W_DISABLE 0x00000000
-#define TLB_WORD2_I_MASK 0x00000400
-#define TLB_WORD2_I_ENABLE 0x00000400
-#define TLB_WORD2_I_DISABLE 0x00000000
-#define TLB_WORD2_M_MASK 0x00000200
-#define TLB_WORD2_M_ENABLE 0x00000200
-#define TLB_WORD2_M_DISABLE 0x00000000
-#define TLB_WORD2_G_MASK 0x00000100
-#define TLB_WORD2_G_ENABLE 0x00000100
-#define TLB_WORD2_G_DISABLE 0x00000000
-#define TLB_WORD2_E_MASK 0x00000080
-#define TLB_WORD2_E_ENABLE 0x00000080
-#define TLB_WORD2_E_DISABLE 0x00000000
-#define TLB_WORD2_UX_MASK 0x00000020
-#define TLB_WORD2_UX_ENABLE 0x00000020
-#define TLB_WORD2_UX_DISABLE 0x00000000
-#define TLB_WORD2_UW_MASK 0x00000010
-#define TLB_WORD2_UW_ENABLE 0x00000010
-#define TLB_WORD2_UW_DISABLE 0x00000000
-#define TLB_WORD2_UR_MASK 0x00000008
-#define TLB_WORD2_UR_ENABLE 0x00000008
-#define TLB_WORD2_UR_DISABLE 0x00000000
-#define TLB_WORD2_SX_MASK 0x00000004
-#define TLB_WORD2_SX_ENABLE 0x00000004
-#define TLB_WORD2_SX_DISABLE 0x00000000
-#define TLB_WORD2_SW_MASK 0x00000002
-#define TLB_WORD2_SW_ENABLE 0x00000002
-#define TLB_WORD2_SW_DISABLE 0x00000000
-#define TLB_WORD2_SR_MASK 0x00000001
-#define TLB_WORD2_SR_ENABLE 0x00000001
-#define TLB_WORD2_SR_DISABLE 0x00000000
-
-/*----------------------------------------------------------------------------+
-| Following instructions are not available in Book E mode of the GNU assembler.
-+----------------------------------------------------------------------------*/
-#define DCCCI(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(454<<1)
-
-#define ICCCI(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(966<<1)
-
-#define DCREAD(rt,ra,rb) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(rb<<11)|(486<<1)
-
-#define ICREAD(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(998<<1)
-
-#define TLBSX(rt,ra,rb) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
-
-#define TLBWE(rs,ra,ws) .long 0x7c000000|\
- (rs<<21)|(ra<<16)|(ws<<11)|(978<<1)
-
-#define TLBRE(rt,ra,ws) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
-
-#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\
- (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
-
-#define MSYNC .long 0x7c000000|\
- (598<<1)
-
-#define MBAR_INST .long 0x7c000000|\
- (854<<1)
-
-#ifndef __ASSEMBLY__
-/* Prototypes */
-void mttlb1(unsigned long index, unsigned long value);
-void mttlb2(unsigned long index, unsigned long value);
-void mttlb3(unsigned long index, unsigned long value);
-unsigned long mftlb1(unsigned long index);
-unsigned long mftlb2(unsigned long index);
-unsigned long mftlb3(unsigned long index);
-
-void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
-void remove_tlb(u32 vaddr, u32 size);
-void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value);
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_440 */
-#endif /* _PPC_MMU_H_ */
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_MP_H_
-#define _ASM_MP_H_
-
-#include <lmb.h>
-
-void setup_mp(void);
-void cpu_mp_lmb_reserve(struct lmb *lmb);
-u32 determine_mp_bootpg(void);
-
-#endif
+++ /dev/null
-/*
- * include/asm-ppc/mpc512x.h
- *
- * Prototypes, etc. for the Freescale MPC512x embedded cpu chips
- *
- * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASMPPC_MPC512X_H
-#define __ASMPPC_MPC512X_H
-
-/*
- * macros for manipulating CSx_START/STOP
- */
-#define CSAW_START(start) ((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
-
-/*
- * Inlines
- */
-
-/*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync.
- */
-static inline void sync_law(volatile void *addr)
-{
- in_be32(addr);
- __asm__ __volatile__ ("isync");
-}
-
-/*
- * Prototypes
- */
-extern long int fixed_sdram(ddr512x_config_t *mddrc_config,
- u32 *dram_init_seq, int seq_sz);
-extern int mpc5121_diu_init(void);
-extern void ide_set_reset(int idereset);
-
-#endif /* __ASMPPC_MPC512X_H */
+++ /dev/null
-#ifndef _PPC_KERNEL_MPC8349_PCI_H
-#define _PPC_KERNEL_MPC8349_PCI_H
-
-
-#define M8265_PCIBR0 0x101ac
-#define M8265_PCIBR1 0x101b0
-#define M8265_PCIMSK0 0x101c4
-#define M8265_PCIMSK1 0x101c8
-
-/* Bit definitions for PCIBR registers */
-
-#define PCIBR_ENABLE 0x00000001
-
-/* Bit definitions for PCIMSK registers */
-
-#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
-#define PCIMSK_64KB 0xFFFF0000
-#define PCIMSK_128KB 0xFFFE0000
-#define PCIMSK_256KB 0xFFFC0000
-#define PCIMSK_512KB 0xFFF80000
-#define PCIMSK_1MB 0xFFF00000
-#define PCIMSK_2MB 0xFFE00000
-#define PCIMSK_4MB 0xFFC00000
-#define PCIMSK_8MB 0xFF800000
-#define PCIMSK_16MB 0xFF000000
-#define PCIMSK_32MB 0xFE000000
-#define PCIMSK_64MB 0xFC000000
-#define PCIMSK_128MB 0xF8000000
-#define PCIMSK_256MB 0xF0000000
-#define PCIMSK_512MB 0xE0000000
-#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
-
-
-#define M826X_SCCR_PCI_MODE_EN 0x100
-
-
-/*
- * Outbound ATU registers (3 sets). These registers control how 60x bus
- * (local) addresses are translated to PCI addresses when the MPC826x is
- * a PCI bus master (initiator).
- */
-
-#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
-#define POTAR_REG1 0x10818
-#define POTAR_REG2 0x10830
-
-#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
-#define POBAR_REG1 0x10820
-#define POBAR_REG2 0x10838
-
-#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
-#define POCMR_REG1 0x10828
-#define POCMR_REG2 0x10840
-
-/* Bit definitions for POMCR registers */
-
-#define POCMR_MASK_4KB 0x000FFFFF
-#define POCMR_MASK_8KB 0x000FFFFE
-#define POCMR_MASK_16KB 0x000FFFFC
-#define POCMR_MASK_32KB 0x000FFFF8
-#define POCMR_MASK_64KB 0x000FFFF0
-#define POCMR_MASK_128KB 0x000FFFE0
-#define POCMR_MASK_256KB 0x000FFFC0
-#define POCMR_MASK_512KB 0x000FFF80
-#define POCMR_MASK_1MB 0x000FFF00
-#define POCMR_MASK_2MB 0x000FFE00
-#define POCMR_MASK_4MB 0x000FFC00
-#define POCMR_MASK_8MB 0x000FF800
-#define POCMR_MASK_16MB 0x000FF000
-#define POCMR_MASK_32MB 0x000FE000
-#define POCMR_MASK_64MB 0x000FC000
-#define POCMR_MASK_128MB 0x000F8000
-#define POCMR_MASK_256MB 0x000F0000
-#define POCMR_MASK_512MB 0x000E0000
-#define POCMR_MASK_1GB 0x000C0000
-
-#define POCMR_ENABLE 0x80000000
-#define POCMR_PCI_IO 0x40000000
-#define POCMR_PREFETCH_EN 0x20000000
-#define POCMR_PCI2 0x10000000
-
-/* Soft PCI reset */
-
-#define PCI_GCR_REG 0x10880
-
-/* Bit definitions for PCI_GCR registers */
-
-#define PCIGCR_PCI_BUS_EN 0x1
-
-/*
- * Inbound ATU registers (2 sets). These registers control how PCI
- * addresses are translated to 60x bus (local) addresses when the
- * MPC826x is a PCI bus target.
- */
-
-#define PITAR_REG1 0x108D0
-#define PIBAR_REG1 0x108D8
-#define PICMR_REG1 0x108E0
-#define PITAR_REG0 0x108E8
-#define PIBAR_REG0 0x108F0
-#define PICMR_REG0 0x108F8
-
-/* Bit definitions for PCI Inbound Comparison Mask registers */
-
-#define PICMR_MASK_4KB 0x000FFFFF
-#define PICMR_MASK_8KB 0x000FFFFE
-#define PICMR_MASK_16KB 0x000FFFFC
-#define PICMR_MASK_32KB 0x000FFFF8
-#define PICMR_MASK_64KB 0x000FFFF0
-#define PICMR_MASK_128KB 0x000FFFE0
-#define PICMR_MASK_256KB 0x000FFFC0
-#define PICMR_MASK_512KB 0x000FFF80
-#define PICMR_MASK_1MB 0x000FFF00
-#define PICMR_MASK_2MB 0x000FFE00
-#define PICMR_MASK_4MB 0x000FFC00
-#define PICMR_MASK_8MB 0x000FF800
-#define PICMR_MASK_16MB 0x000FF000
-#define PICMR_MASK_32MB 0x000FE000
-#define PICMR_MASK_64MB 0x000FC000
-#define PICMR_MASK_128MB 0x000F8000
-#define PICMR_MASK_256MB 0x000F0000
-#define PICMR_MASK_512MB 0x000E0000
-#define PICMR_MASK_1GB 0x000C0000
-
-#define PICMR_ENABLE 0x80000000
-#define PICMR_NO_SNOOP_EN 0x40000000
-#define PICMR_PREFETCH_EN 0x20000000
-
-/* PCI error Registers */
-
-#define PCI_ERROR_STATUS_REG 0x10884
-#define PCI_ERROR_MASK_REG 0x10888
-#define PCI_ERROR_CONTROL_REG 0x1088C
-#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
-#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
-#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
-
-/* PCI error Register bit defines */
-
-#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
-#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
-#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
-#define PCI_ERROR_PCI_NO_RSP 0x00000008
-#define PCI_ERROR_PCI_TAR_ABT 0x00000010
-#define PCI_ERROR_PCI_SERR 0x00000020
-#define PCI_ERROR_PCI_PERR_RD 0x00000040
-#define PCI_ERROR_PCI_PERR_WR 0x00000080
-#define PCI_ERROR_I2O_OFQO 0x00000100
-#define PCI_ERROR_I2O_IPQO 0x00000200
-#define PCI_ERROR_IRA 0x00000400
-#define PCI_ERROR_NMI 0x00000800
-#define PCI_ERROR_I2O_DBMC 0x00001000
-
-/*
- * Register pair used to generate configuration cycles on the PCI bus
- * and access the MPC826x's own PCI configuration registers.
- */
-
-#define PCI_CFG_ADDR_REG 0x10900
-#define PCI_CFG_DATA_REG 0x10904
-
-/* Bus parking decides where the bus control sits when idle */
-/* If modifying memory controllers for PCI park on the core */
-
-#define PPC_ACR_BUS_PARK_CORE 0x6
-#define PPC_ACR_BUS_PARK_PCI 0x3
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
+++ /dev/null
-/*
- * Freescale non-CPM SPI Controller
- *
- * Copyright 2008 Qstreams Networks, Inc.
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_MPC8XXX_SPI_H_
-#define _ASM_MPC8XXX_SPI_H_
-
-#include <asm/types.h>
-
-#if defined(CONFIG_MPC834x) || \
- defined(CONFIG_MPC8313) || \
- defined(CONFIG_MPC8315) || \
- defined(CONFIG_MPC837x)
-
-typedef struct spi8xxx {
- u8 res0[0x20]; /* 0x0-0x01f reserved */
- u32 mode; /* mode register */
- u32 event; /* event register */
- u32 mask; /* mask register */
- u32 com; /* command register */
- u32 tx; /* transmit register */
- u32 rx; /* receive register */
- u8 res1[0xFC8]; /* fill up to 0x1000 */
-} spi8xxx_t;
-
-#endif
-
-#endif /* _ASM_MPC8XXX_SPI_H_ */
+++ /dev/null
-/* originally from linux source (asm-ppc/io.h).
- * Sanity added by Rob Taylor, Flying Pig Systems, 2000
- */
-#ifndef _PCI_IO_H_
-#define _PCI_IO_H_
-
-#include "io.h"
-
-
-#define pci_read_le16(addr, dest) \
- __asm__ __volatile__("lhbrx %0,0,%1" : "=r" (dest) : \
- "r" (addr), "m" (*addr));
-
-#define pci_write_le16(addr, val) \
- __asm__ __volatile__("sthbrx %1,0,%2" : "=m" (*addr) : \
- "r" (val), "r" (addr));
-
-
-#define pci_read_le32(addr, dest) \
- __asm__ __volatile__("lwbrx %0,0,%1" : "=r" (dest) : \
- "r" (addr), "m" (*addr));
-
-#define pci_write_le32(addr, val) \
-__asm__ __volatile__("stwbrx %1,0,%2" : "=m" (*addr) : \
- "r" (val), "r" (addr));
-
-#define pci_readb(addr,b) ((b) = *(volatile u8 *) (addr))
-#define pci_writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
-
-#if !defined(__BIG_ENDIAN)
-#define pci_readw(addr,b) ((b) = *(volatile u16 *) (addr))
-#define pci_readl(addr,b) ((b) = *(volatile u32 *) (addr))
-#define pci_writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
-#define pci_writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
-#else
-#define pci_readw(addr,b) pci_read_le16((volatile u16 *)(addr),(b))
-#define pci_readl(addr,b) pci_read_le32((volatile u32 *)(addr),(b))
-#define pci_writew(b,addr) pci_write_le16((volatile u16 *)(addr),(b))
-#define pci_writel(b,addr) pci_write_le32((volatile u32 *)(addr),(b))
-#endif
-
-
-#endif /* _PCI_IO_H_ */
+++ /dev/null
-/* 11/02/95 */
-/*----------------------------------------------------------------------------*/
-/* Plug and Play header definitions */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for PnP on PowerPC Reference Platform */
-/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */
-/* (or later versions) is available on Compuserve in the PLUGPLAY area. */
-/* This code has extensions to that specification, namely new short and */
-/* long tag types for platform dependent information */
-
-/* Warning: LE notation used throughout this file */
-
-/* For enum's: if given in hex then they are bit significant, i.e. */
-/* only one bit is on for each enum */
-
-#ifndef _PNP_
-#define _PNP_
-
-#ifndef __ASSEMBLY__
-#define MAX_MEM_REGISTERS 9
-#define MAX_IO_PORTS 20
-#define MAX_IRQS 7
-/*#define MAX_DMA_CHANNELS 7*/
-
-/* Interrupt controllers */
-
-#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */
-#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */
-#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */
-#define PNPinterrupt3 "PNP0003" /* APIC */
-#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */
-
-/* Timers */
-
-#define PNPtimer0 "PNP0100" /* AT Timer */
-#define PNPtimer1 "PNP0101" /* EISA Timer */
-#define PNPtimer2 "PNP0102" /* MCA Timer */
-
-/* DMA controllers */
-
-#define PNPdma0 "PNP0200" /* AT DMA Controller */
-#define PNPdma1 "PNP0201" /* EISA DMA Controller */
-#define PNPdma2 "PNP0202" /* MCA DMA Controller */
-
-/* start of August 15, 1994 additions */
-/* CMOS */
-#define PNPCMOS "IBM0009" /* CMOS */
-
-/* L2 Cache */
-#define PNPL2 "IBM0007" /* L2 Cache */
-
-/* NVRAM */
-#define PNPNVRAM "IBM0008" /* NVRAM */
-
-/* Power Management */
-#define PNPPM "IBM0005" /* Power Management */
-/* end of August 15, 1994 additions */
-
-/* Keyboards */
-
-#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */
-#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */
-#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */
-#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */
-#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */
-#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */
-#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */
-#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */
-
-/* Parallel port controllers */
-
-#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */
-#define PNPparallel1 "PNP0401" /* ECP Parallel Port */
-#define PNPepp "IBM001C" /* EPP Parallel Port */
-
-/* Serial port controllers */
-
-#define PNPserial0 "PNP0500" /* Standard PC Serial port */
-#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */
-
-/* Disk controllers */
-
-#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */
-#define PNPdisk1 "PNP0601" /* Plus Hardcard II */
-#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */
-
-/* Diskette controllers */
-
-#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */
-
-/* Display controllers */
-
-#define PNPdisplay0 "PNP0900" /* VGA Compatible */
-#define PNPdisplay1 "PNP0901" /* Video Seven VGA */
-#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */
-#define PNPdisplay3 "PNP0903" /* Trident VGA */
-#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */
-#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */
-#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */
-#define PNPdisplay7 "PNP0907" /* Western Digital VGA */
-#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */
-#define PNPdisplay9 "PNP0909" /* S3 */
-#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */
-#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */
-#define PNPdisplayC "PNP090C" /* XGA Compatible */
-#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */
-#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */
-#define PNPdisplayF "PNP090F" /* Oak Technology VGA */
-
-/* Peripheral busses */
-
-#define PNPbuses0 "PNP0A00" /* ISA Bus */
-#define PNPbuses1 "PNP0A01" /* EISA Bus */
-#define PNPbuses2 "PNP0A02" /* MCA Bus */
-#define PNPbuses3 "PNP0A03" /* PCI Bus */
-#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */
-
-/* RTC, BIOS, planar devices */
-
-#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */
-#define PNPrtc0 "PNP0B00" /* AT RTC */
-#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */
-#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */
-#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */
-#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */
-
-/* PCMCIA controller */
-
-#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */
-
-/* Mice */
-
-#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */
-#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */
-#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */
-#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */
-#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */
-#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */
-#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */
-#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */
-#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */
-#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */
-#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */
-#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */
-
-/* Modems */
-
-#define PNPmodem0 "PNP9000" /* Specific IDs TBD */
-
-/* Network controllers */
-
-#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */
-#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */
-#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */
-#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */
-#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */
-#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */
-#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */
-#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */
-
-/* SCSI controllers */
-
-#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */
-#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */
-#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/
-#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */
-#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */
-#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */
-#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */
-
-/* Sound/Video, Multimedia */
-
-#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */
-#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */
-#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */
-#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */
-#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */
-#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */
-#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */
-#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */
-
-/* Operator Panel */
-#define PNPopctl "IBM000B" /* Operator's panel */
-
-/* Service Processor */
-#define PNPsp "IBM0011" /* IBM Service Processor */
-#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */
-#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */
-
-/* Memory Controller */
-#define PNPmemctl "IBM000A" /* Memory controller */
-
-/* Graphics Assist */
-#define PNPg_assist "IBM0014" /* Graphics Assist */
-
-/* Miscellaneous Device Controllers */
-#define PNPtablet "IBM0019" /* IBM Tablet Controller */
-
-/* PNP Packet Handles */
-
-#define S1_Packet 0x0A /* Version resource */
-#define S2_Packet 0x15 /* Logical DEVID (without flags) */
-#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */
-#define S3_Packet 0x1C /* Compatible device ID */
-#define S4_Packet 0x22 /* IRQ resource (without flags) */
-#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */
-#define S5_Packet 0x2A /* DMA resource */
-#define S6_Packet 0x30 /* Depend funct start (w/o priority) */
-#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */
-#define S7_Packet 0x38 /* Depend funct end */
-#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */
-#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */
-#define S14_Packet 0x71 /* Vendor defined */
-#define S15_Packet 0x78 /* End of resource (w/o checksum) */
-#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */
-#define L1_Packet 0x81 /* Memory range */
-#define L1_Shadow 0x20 /* Memory is shadowable */
-#define L1_32bit_mem 0x18 /* 32-bit memory only */
-#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */
-#define L1_Decode_Hi 0x04 /* decode supports high address */
-#define L1_Cache 0x02 /* read cacheable, write-through */
-#define L1_Writeable 0x01 /* Memory is writeable */
-#define L2_Packet 0x82 /* ANSI ID string */
-#define L3_Packet 0x83 /* Unicode ID string */
-#define L4_Packet 0x84 /* Vendor defined */
-#define L5_Packet 0x85 /* Large I/O */
-#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */
-#define END_TAG 0x78 /* End of resource */
-#define DF_START_TAG 0x30 /* Dependent function start */
-#define DF_START_TAG_priority 0x31 /* Dependent function start */
-#define DF_END_TAG 0x38 /* Dependent function end */
-#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */
-
-/* Device Base Type Codes */
-
-typedef enum _PnP_BASE_TYPE {
- Reserved = 0,
- MassStorageDevice = 1,
- NetworkInterfaceController = 2,
- DisplayController = 3,
- MultimediaController = 4,
- MemoryController = 5,
- BridgeController = 6,
- CommunicationsDevice = 7,
- SystemPeripheral = 8,
- InputDevice = 9,
- ServiceProcessor = 0x0A, /* 11/2/95 */
- } PnP_BASE_TYPE;
-
-/* Device Sub Type Codes */
-
-typedef enum _PnP_SUB_TYPE {
- SCSIController = 0,
- IDEController = 1,
- FloppyController = 2,
- IPIController = 3,
- OtherMassStorageController = 0x80,
-
- EthernetController = 0,
- TokenRingController = 1,
- FDDIController = 2,
- OtherNetworkController = 0x80,
-
- VGAController= 0,
- SVGAController= 1,
- XGAController= 2,
- OtherDisplayController = 0x80,
-
- VideoController = 0,
- AudioController = 1,
- OtherMultimediaController = 0x80,
-
- RAM = 0,
- FLASH = 1,
- OtherMemoryDevice = 0x80,
-
- HostProcessorBridge = 0,
- ISABridge = 1,
- EISABridge = 2,
- MicroChannelBridge = 3,
- PCIBridge = 4,
- PCMCIABridge = 5,
- VMEBridge = 6,
- OtherBridgeDevice = 0x80,
-
- RS232Device = 0,
- ATCompatibleParallelPort = 1,
- OtherCommunicationsDevice = 0x80,
-
- ProgrammableInterruptController = 0,
- DMAController = 1,
- SystemTimer = 2,
- RealTimeClock = 3,
- L2Cache = 4,
- NVRAM = 5,
- PowerManagement = 6,
- CMOS = 7,
- OperatorPanel = 8,
- ServiceProcessorClass1 = 9,
- ServiceProcessorClass2 = 0xA,
- ServiceProcessorClass3 = 0xB,
- GraphicAssist = 0xC,
- SystemPlanar = 0xF, /* 10/5/95 */
- OtherSystemPeripheral = 0x80,
-
- KeyboardController = 0,
- Digitizer = 1,
- MouseController = 2,
- TabletController = 3, /* 10/27/95 */
- OtherInputController = 0x80,
-
- GeneralMemoryController = 0,
- } PnP_SUB_TYPE;
-
-/* Device Interface Type Codes */
-
-typedef enum _PnP_INTERFACE {
- General = 0,
- GeneralSCSI = 0,
- GeneralIDE = 0,
- ATACompatible = 1,
-
- GeneralFloppy = 0,
- Compatible765 = 1,
- NS398_Floppy = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26E_Floppy = 3, /* Ports 26E and 26F */
- NS15C_Floppy = 4, /* Ports 15C and 15D */
- NS2E_Floppy = 5, /* Ports 2E and 2F */
- CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */
-
- GeneralIPI = 0,
-
- GeneralEther = 0,
- GeneralToken = 0,
- GeneralFDDI = 0,
-
- GeneralVGA = 0,
- GeneralSVGA = 0,
- GeneralXGA = 0,
-
- GeneralVideo = 0,
- GeneralAudio = 0,
- CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */
-
- GeneralRAM = 0,
- GeneralFLASH = 0,
- PCIMemoryController = 0, /* PCI Config Method */
- RS6KMemoryController = 1, /* RS6K Config Method */
-
- GeneralHostBridge = 0,
- GeneralISABridge = 0,
- GeneralEISABridge = 0,
- GeneralMCABridge = 0,
- GeneralPCIBridge = 0,
- PCIBridgeDirect = 0,
- PCIBridgeIndirect = 1,
- PCIBridgeRS6K = 2,
- GeneralPCMCIABridge = 0,
- GeneralVMEBridge = 0,
-
- GeneralRS232 = 0,
- COMx = 1,
- Compatible16450 = 2,
- Compatible16550 = 3,
- NS398SerPort = 4, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26ESerPort = 5, /* Ports 26E and 26F */
- NS15CSerPort = 6, /* Ports 15C and 15D */
- NS2ESerPort = 7, /* Ports 2E and 2F */
-
- GeneralParPort = 0,
- LPTx = 1,
- NS398ParPort = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26EParPort = 3, /* Ports 26E and 26F */
- NS15CParPort = 4, /* Ports 15C and 15D */
- NS2EParPort = 5, /* Ports 2E and 2F */
-
- GeneralPIC = 0,
- ISA_PIC = 1,
- EISA_PIC = 2,
- MPIC = 3,
- RS6K_PIC = 4,
-
- GeneralDMA = 0,
- ISA_DMA = 1,
- EISA_DMA = 2,
-
- GeneralTimer = 0,
- ISA_Timer = 1,
- EISA_Timer = 2,
- GeneralRTC = 0,
- ISA_RTC = 1,
-
- StoreThruOnly = 1,
- StoreInEnabled = 2,
- RS6KL2Cache = 3,
-
- IndirectNVRAM = 0, /* Indirectly addressed */
- DirectNVRAM = 1, /* Memory Mapped */
- IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */
-
- GeneralPowerManagement = 0,
- EPOWPowerManagement = 1,
- PowerControl = 2, /* d1378 */
-
- GeneralCMOS = 0,
-
- GeneralOPPanel = 0,
- HarddiskLight = 1,
- CDROMLight = 2,
- PowerLight = 3,
- KeyLock = 4,
- ANDisplay = 5, /* AlphaNumeric Display */
- SystemStatusLED = 6, /* 3 digit 7 segment LED */
- CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */
-
- GeneralServiceProcessor = 0,
-
- TransferData = 1,
- IGMC32 = 2,
- IGMC64 = 3,
-
- GeneralSystemPlanar = 0, /* 10/5/95 */
-
- } PnP_INTERFACE;
-
-/* PnP resources */
-
-/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
-
-typedef struct _SERIAL_ID {
- unsigned char VendorID0; /* Bit(7)=0 */
- /* Bits(6:2)=1st character in */
- /* compressed ASCII */
- /* Bits(1:0)=2nd character in */
- /* compressed ASCII bits(4:3) */
- unsigned char VendorID1; /* Bits(7:5)=2nd character in */
- /* compressed ASCII bits(2:0) */
- /* Bits(4:0)=3rd character in */
- /* compressed ASCII */
- unsigned char VendorID2; /* Product number - vendor assigned */
- unsigned char VendorID3; /* Product number - vendor assigned */
-
-/* Serial number is to provide uniqueness if more than one board of same */
-/* type is in system. Must be "FFFFFFFF" if feature not supported. */
-
- unsigned char Serial0; /* Unique serial number bits (7:0) */
- unsigned char Serial1; /* Unique serial number bits (15:8) */
- unsigned char Serial2; /* Unique serial number bits (23:16) */
- unsigned char Serial3; /* Unique serial number bits (31:24) */
- unsigned char Checksum;
- } SERIAL_ID;
-
-typedef enum _PnPItemName {
- Unused = 0,
- PnPVersion = 1,
- LogicalDevice = 2,
- CompatibleDevice = 3,
- IRQFormat = 4,
- DMAFormat = 5,
- StartDepFunc = 6,
- EndDepFunc = 7,
- IOPort = 8,
- FixedIOPort = 9,
- Res1 = 10,
- Res2 = 11,
- Res3 = 12,
- SmallVendorItem = 14,
- EndTag = 15,
- MemoryRange = 1,
- ANSIIdentifier = 2,
- UnicodeIdentifier = 3,
- LargeVendorItem = 4,
- MemoryRange32 = 5,
- MemoryRangeFixed32 = 6,
- } PnPItemName;
-
-/* Define a bunch of access functions for the bits in the tag field */
-
-/* Tag type - 0 = small; 1 = large */
-#define tag_type(t) (((t) & 0x80)>>7)
-#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
-
-/* Small item name is 4 bits - one of PnPItemName enum above */
-#define tag_small_item_name(t) (((t) & 0x78)>>3)
-#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
-
-/* Small item count is 3 bits - count of further bytes in packet */
-#define tag_small_count(t) ((t) & 0x07)
-#define set_tag_count(t,v) (t = (t & 0x78) | (v))
-
-/* Large item name is 7 bits - one of PnPItemName enum above */
-#define tag_large_item_name(t) ((t) & 0x7f)
-#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
-
-/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
-
-typedef union _PnP_TAG_PACKET {
- struct _S1_Pack{ /* VERSION PACKET */
- unsigned char Tag; /* small tag = 0x0a */
- unsigned char Version[2]; /* PnP version, Vendor version */
- } S1_Pack;
-
- struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x15 or 0x16 */
- unsigned char DevId[4]; /* Logical device id */
- unsigned char Flags[2]; /* bit(0) boot device; */
- /* bit(7:1) cmd in range x31-x37 */
- /* bit(7:0) cmd in range x28-x3f (opt)*/
- } S2_Pack;
-
- struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x1c */
- unsigned char CompatId[4]; /* Compatible device id */
- } S3_Pack;
-
- struct _S4_Pack{ /* IRQ PACKET */
- unsigned char Tag; /* small tag = 0x22 or 0x23 */
- unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */
- /* bit(0) is IRQ8 ... */
- unsigned char IRQInfo; /* optional; assume bit(0)=1; else */
- /* bit(0) - high true edge sensitive */
- /* bit(1) - low true edge sensitive */
- /* bit(2) - high true level sensitive*/
- /* bit(3) - low true level sensitive */
- /* bit(7:4) - must be 0 */
- } S4_Pack;
-
- struct _S5_Pack{ /* DMA PACKET */
- unsigned char Tag; /* small tag = 0x2a */
- unsigned char DMAMask; /* bit(0) is channel 0 ... */
- unsigned char DMAInfo;
- } S5_Pack;
-
- struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x30 or 0x31 */
- unsigned char Priority; /* Optional; if missing then x01; else*/
- /* x00 = best possible */
- /* x01 = acceptible */
- /* x02 = sub-optimal but functional */
- } S6_Pack;
-
- struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x38 */
- } S7_Pack;
-
- struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */
- unsigned char Tag; /* small tag x47 */
- unsigned char IOInfo; /* x0 = decode only bits(9:0); */
-#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */
- unsigned char RangeMin[2]; /* Min base address */
- unsigned char RangeMax[2]; /* Max base address */
- unsigned char IOAlign; /* base alignmt, incr in 1B blocks */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S8_Pack;
-
- struct _S9_Pack{ /* FIXED I/O PORT PACKET */
- unsigned char Tag; /* small tag = 0x4b */
- unsigned char Range[2]; /* base address 10 bits */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S9_Pack;
-
- struct _S14_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* small tag = 0x7m m = 1-7 */
- union _S14_Data{
- unsigned char Data[7]; /* Vendor defined */
- struct _S14_PPCPack{ /* Pr*p s14 pack */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[6]; /* Vendor defined */
- } S14_PPCPack;
- } S14_Data;
- } S14_Pack;
-
- struct _S15_Pack{ /* END PACKET */
- unsigned char Tag; /* small tag = 0x78 or 0x79 */
- unsigned char Check; /* optional - checksum */
- } S15_Pack;
-
- struct _L1_Pack{ /* MEMORY RANGE PACKET */
- unsigned char Tag; /* large tag = 0x81 */
- unsigned char Count0; /* x09 */
- unsigned char Count1; /* x00 */
- unsigned char Data[9]; /* a variable array of bytes, */
- /* count in tag */
- } L1_Pack;
-
- struct _L2_Pack{ /* ANSI ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x82 */
- unsigned char Count0; /* Length of string */
- unsigned char Count1;
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L2_Pack;
-
- struct _L3_Pack{ /* UNICODE ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x83 */
- unsigned char Count0; /* Length + 2 of string */
- unsigned char Count1;
- unsigned char Country0; /* TBD */
- unsigned char Country1; /* TBD */
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L3_Pack;
-
- struct _L4_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* large tag = 0x84 */
- unsigned char Count0;
- unsigned char Count1;
- union _L4_Data{
- unsigned char Data[1]; /* a variable array of bytes, */
- /* count in tag */
- struct _L4_PPCPack{ /* Pr*p L4 packet */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[1]; /* a variable array of bytes, */
- /* count in tag */
- } L4_PPCPack;
- } L4_Data;
- } L4_Pack;
-
- struct _L5_Pack{
- unsigned char Tag; /* large tag = 0x85 */
- unsigned char Count0; /* Count = 17 */
- unsigned char Count1;
- unsigned char Data[17];
- } L5_Pack;
-
- struct _L6_Pack{
- unsigned char Tag; /* large tag = 0x86 */
- unsigned char Count0; /* Count = 9 */
- unsigned char Count1;
- unsigned char Data[9];
- } L6_Pack;
-
- } PnP_TAG_PACKET;
-
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _PNP_ */
+++ /dev/null
-#ifndef _PPC_POSIX_TYPES_H
-#define _PPC_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned int __kernel_dev_t;
-typedef unsigned int __kernel_ino_t;
-typedef unsigned int __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-#ifndef __GNUC__
-
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
-
-#else /* __GNUC__ */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
-{
- unsigned long _tmp = fd / __NFDBITS;
- unsigned long _rem = fd % __NFDBITS;
- return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
-{
- unsigned int *tmp = (unsigned int *)p->fds_bits;
- int i;
-
- if (__builtin_constant_p(__FDSET_LONGS)) {
- switch (__FDSET_LONGS) {
- case 8:
- tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
- tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
- return;
- }
- }
- i = __FDSET_LONGS;
- while (i) {
- i--;
- *tmp = 0;
- tmp++;
- }
-}
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-#endif /* __GNUC__ */
-#endif /* _PPC_POSIX_TYPES_H */
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PPC4xx_EBC_H_
-#define _PPC4xx_EBC_H_
-
-/*
- * Currently there are two register layout versions for the IBM EBC core
- * used on 4xx PPC's. The following grouping lists the first layout.
- * Within this group there is a slight variation concerning the bit field
- * position of the EMPL and EMPH fields:
- */
-#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
- defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define CONFIG_EBC_PPC4xx_IBM_VER1
-#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
- defined(CONFIG_405EP)
-#define EBC_CFG_EMPH_POS 8
-#define EBC_CFG_EMPL_POS 6
-#else
-#define EBC_CFG_EMPH_POS 6
-#define EBC_CFG_EMPL_POS 8
-#endif
-#endif
-
-/*
- * Define the max number of EBC banks (chip selects)
- */
-#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
- defined(CONFIG_405EZ) || \
- defined(CONFIG_440GP) || defined(CONFIG_440GX)
-#define EBC_NUM_BANKS 8
-#endif
-
-#if defined(CONFIG_405EP)
-#define EBC_NUM_BANKS 5
-#endif
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_460SX)
-#define EBC_NUM_BANKS 4
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define EBC_NUM_BANKS 6
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define EBC_NUM_BANKS 3
-#endif
-
-/* Bank Configuration Register */
-#define EBC_BXCR(n) (n)
-#define EBC_BXCR_BANK_SIZE(n) (0x100000 << (((n) & EBC_BXCR_BS_MASK) >> 17))
-
-#define EBC_BXCR_BAS_MASK PPC_REG_VAL(11, 0xFFF)
-#define EBC_BXCR_BAS_ENCODE(n) (((static_cast(u32, n)) & EBC_BXCR_BAS_MASK))
-#define EBC_BXCR_BS_MASK PPC_REG_VAL(14, 0x7)
-#define EBC_BXCR_BS_1MB PPC_REG_VAL(14, 0x0)
-#define EBC_BXCR_BS_2MB PPC_REG_VAL(14, 0x1)
-#define EBC_BXCR_BS_4MB PPC_REG_VAL(14, 0x2)
-#define EBC_BXCR_BS_8MB PPC_REG_VAL(14, 0x3)
-#define EBC_BXCR_BS_16MB PPC_REG_VAL(14, 0x4)
-#define EBC_BXCR_BS_32MB PPC_REG_VAL(14, 0x5)
-#define EBC_BXCR_BS_64MB PPC_REG_VAL(14, 0x6)
-#define EBC_BXCR_BS_128MB PPC_REG_VAL(14, 0x7)
-#define EBC_BXCR_BU_MASK PPC_REG_VAL(16, 0x3)
-#define EBC_BXCR_BU_NONE PPC_REG_VAL(16, 0x0)
-#define EBC_BXCR_BU_R PPC_REG_VAL(16, 0x1)
-#define EBC_BXCR_BU_W PPC_REG_VAL(16, 0x2)
-#define EBC_BXCR_BU_RW PPC_REG_VAL(16, 0x3)
-#define EBC_BXCR_BW_MASK PPC_REG_VAL(18, 0x3)
-#define EBC_BXCR_BW_8BIT PPC_REG_VAL(18, 0x0)
-#define EBC_BXCR_BW_16BIT PPC_REG_VAL(18, 0x1)
-#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
-#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x2)
-#else
-#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x3)
-#endif
-
-/* Bank Access Parameter Register */
-#define EBC_BXAP_BME_ENABLED PPC_REG_VAL(0, 0x1)
-#define EBC_BXAP_BME_DISABLED PPC_REG_VAL(0, 0x0)
-#define EBC_BXAP_TWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0xFF)
-#define EBC_BXAP_FWT_ENCODE(n) PPC_REG_VAL(5, (static_cast(u32, n)) & 0x1F)
-#define EBC_BXAP_BWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0x7)
-#define EBC_BXAP_BCE_DISABLE PPC_REG_VAL(9, 0x0)
-#define EBC_BXAP_BCE_ENABLE PPC_REG_VAL(9, 0x1)
-#define EBC_BXAP_BCT_MASK PPC_REG_VAL(11, 0x3)
-#define EBC_BXAP_BCT_2TRANS PPC_REG_VAL(11, 0x0)
-#define EBC_BXAP_BCT_4TRANS PPC_REG_VAL(11, 0x1)
-#define EBC_BXAP_BCT_8TRANS PPC_REG_VAL(11, 0x2)
-#define EBC_BXAP_BCT_16TRANS PPC_REG_VAL(11, 0x3)
-#define EBC_BXAP_CSN_ENCODE(n) PPC_REG_VAL(13, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_OEN_ENCODE(n) PPC_REG_VAL(15, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_WBN_ENCODE(n) PPC_REG_VAL(17, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_WBF_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_TH_ENCODE(n) PPC_REG_VAL(22, (static_cast(u32, n)) & 0x7)
-#define EBC_BXAP_RE_ENABLED PPC_REG_VAL(23, 0x1)
-#define EBC_BXAP_RE_DISABLED PPC_REG_VAL(23, 0x0)
-#define EBC_BXAP_SOR_DELAYED PPC_REG_VAL(24, 0x0)
-#define EBC_BXAP_SOR_NONDELAYED PPC_REG_VAL(24, 0x1)
-#define EBC_BXAP_BEM_WRITEONLY PPC_REG_VAL(25, 0x0)
-#define EBC_BXAP_BEM_RW PPC_REG_VAL(25, 0x1)
-#define EBC_BXAP_PEN_DISABLED PPC_REG_VAL(26, 0x0)
-#define EBC_BXAP_PEN_ENABLED PPC_REG_VAL(26, 0x1)
-
-/* Common fields in EBC0_CFG register */
-#define EBC_CFG_PTD_MASK PPC_REG_VAL(1, 0x1)
-#define EBC_CFG_PTD_ENABLE PPC_REG_VAL(1, 0x0)
-#define EBC_CFG_PTD_DISABLE PPC_REG_VAL(1, 0x1)
-#define EBC_CFG_RTC_MASK PPC_REG_VAL(4, 0x7)
-#define EBC_CFG_RTC_16PERCLK PPC_REG_VAL(4, 0x0)
-#define EBC_CFG_RTC_32PERCLK PPC_REG_VAL(4, 0x1)
-#define EBC_CFG_RTC_64PERCLK PPC_REG_VAL(4, 0x2)
-#define EBC_CFG_RTC_128PERCLK PPC_REG_VAL(4, 0x3)
-#define EBC_CFG_RTC_256PERCLK PPC_REG_VAL(4, 0x4)
-#define EBC_CFG_RTC_512PERCLK PPC_REG_VAL(4, 0x5)
-#define EBC_CFG_RTC_1024PERCLK PPC_REG_VAL(4, 0x6)
-#define EBC_CFG_RTC_2048PERCLK PPC_REG_VAL(4, 0x7)
-#define EBC_CFG_PME_MASK PPC_REG_VAL(14, 0x1)
-#define EBC_CFG_PME_DISABLE PPC_REG_VAL(14, 0x0)
-#define EBC_CFG_PME_ENABLE PPC_REG_VAL(14, 0x1)
-#define EBC_CFG_PMT_MASK PPC_REG_VAL(19, 0x1F)
-#define EBC_CFG_PMT_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x1F)
-
-/* Now the two versions of the other bits */
-#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
-#define EBC_CFG_EBTC_MASK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_EBTC_HI PPC_REG_VAL(0, 0x0)
-#define EBC_CFG_EBTC_DRIVEN PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_EMPH_MASK PPC_REG_VAL(EBC_CFG_EMPH_POS, 0x3)
-#define EBC_CFG_EMPH_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
- (static_cast(u32, n)) & 0x3)
-#define EBC_CFG_EMPL_MASK PPC_REG_VAL(EBC_CFG_EMPL_POS, 0x3)
-#define EBC_CFG_EMPL_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
- (static_cast(u32, n)) & 0x3)
-#define EBC_CFG_CSTC_MASK PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_CSTC_HI PPC_REG_VAL(9, 0x0)
-#define EBC_CFG_CSTC_DRIVEN PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_BPR_MASK PPC_REG_VAL(11, 0x3)
-#define EBC_CFG_BPR_1DW PPC_REG_VAL(11, 0x0)
-#define EBC_CFG_BPR_2DW PPC_REG_VAL(11, 0x1)
-#define EBC_CFG_BPR_4DW PPC_REG_VAL(11, 0x2)
-#define EBC_CFG_EMS_MASK PPC_REG_VAL(13, 0x3)
-#define EBC_CFG_EMS_8BIT PPC_REG_VAL(13, 0x0)
-#define EBC_CFG_EMS_16BIT PPC_REG_VAL(13, 0x1)
-#define EBC_CFG_EMS_32BIT PPC_REG_VAL(13, 0x2)
-#else
-#define EBC_CFG_LE_MASK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_LE_UNLOCK PPC_REG_VAL(0, 0x0)
-#define EBC_CFG_LE_LOCK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_ATC_MASK PPC_REG_VAL(5, 0x1)
-#define EBC_CFG_ATC_HI PPC_REG_VAL(5, 0x0)
-#define EBC_CFG_ATC_PREVIOUS PPC_REG_VAL(5, 0x1)
-#define EBC_CFG_DTC_MASK PPC_REG_VAL(6, 0x1)
-#define EBC_CFG_DTC_HI PPC_REG_VAL(6, 0x0)
-#define EBC_CFG_DTC_PREVIOUS PPC_REG_VAL(6, 0x1)
-#define EBC_CFG_CTC_MASK PPC_REG_VAL(7, 0x1)
-#define EBC_CFG_CTC_HI PPC_REG_VAL(7, 0x0)
-#define EBC_CFG_CTC_PREVIOUS PPC_REG_VAL(7, 0x1)
-#define EBC_CFG_OEO_MASK PPC_REG_VAL(8, 0x1)
-#define EBC_CFG_OEO_HI PPC_REG_VAL(8, 0x0)
-#define EBC_CFG_OEO_PREVIOUS PPC_REG_VAL(8, 0x1)
-#define EBC_CFG_EMC_MASK PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_EMC_NONDEFAULT PPC_REG_VAL(9, 0x0)
-#define EBC_CFG_EMC_DEFAULT PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_PR_MASK PPC_REG_VAL(21, 0x3)
-#define EBC_CFG_PR_16 PPC_REG_VAL(21, 0x0)
-#define EBC_CFG_PR_32 PPC_REG_VAL(21, 0x1)
-#define EBC_CFG_PR_64 PPC_REG_VAL(21, 0x2)
-#define EBC_CFG_PR_128 PPC_REG_VAL(21, 0x3)
-#endif
-
-#endif /* _PPC4xx_EBC_H_ */
+++ /dev/null
-
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PPC4xx_ISRAM_H_
-#define _PPC4xx_ISRAM_H_
-
-/*
- * Internal SRAM
- */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ISRAM0_DCR_BASE 0x380
-#else
-#define ISRAM0_DCR_BASE 0x020
-#endif
-#define ISRAM0_SB0CR (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define ISRAM0_SB1CR (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
-#define ISRAM0_SB2CR (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
-#define ISRAM0_SB3CR (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
-#define ISRAM0_BEAR (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define ISRAM0_BESR0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define ISRAM0_BESR1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define ISRAM0_PMEG (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define ISRAM0_CID (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define ISRAM1_DCR_BASE 0x0B0
-#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/
-#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */
-#define ISRAM1_BESR0 (ISRAM1_DCR_BASE+0x05) /* SRAM1 bus error status reg 0 */
-#define ISRAM1_BESR1 (ISRAM1_DCR_BASE+0x06) /* SRAM1 bus error status reg 1 */
-#define ISRAM1_PMEG (ISRAM1_DCR_BASE+0x07) /* SRAM1 power management */
-#define ISRAM1_CID (ISRAM1_DCR_BASE+0x08) /* SRAM1 bus core id reg */
-#define ISRAM1_REVID (ISRAM1_DCR_BASE+0x09) /* SRAM1 bus revision id reg */
-#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */
-#endif /* CONFIG_460EX || CONFIG_460GT */
-
-/*
- * L2 Cache
- */
-#if defined (CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define L2_CACHE_BASE 0x030
-#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */
-#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */
-#define L2_CACHE_ADDR (L2_CACHE_BASE+0x02) /* L2 Cache Address */
-#define L2_CACHE_DATA (L2_CACHE_BASE+0x03) /* L2 Cache Data */
-#define L2_CACHE_STAT (L2_CACHE_BASE+0x04) /* L2 Cache Status */
-#define L2_CACHE_CVER (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
-#define L2_CACHE_SNP0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
-#define L2_CACHE_SNP1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
-#endif /* CONFIG_440GX */
-
-#endif /* _PPC4xx_ISRAM_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PPC4xx_SDRAM_H_
-#define _PPC4xx_SDRAM_H_
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_SDRAM)
-
-/*
- * SDRAM Controller
- */
-
-#ifndef CONFIG_405EP
-#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */
-#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */
-#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */
-#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */
-#define SDRAM0_BEAR 0x10 /* bus error address reg */
-#endif
-#define SDRAM0_CFG 0x20 /* memory controller options 1 */
-#define SDRAM0_STATUS 0x24 /* memory status */
-#define SDRAM0_RTR 0x30 /* refresh timer reg */
-#define SDRAM0_PMIT 0x34 /* power management idle timer */
-#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */
-#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */
-#ifndef CONFIG_405EP
-#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */
-#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */
-#endif
-#define SDRAM0_TR 0x80 /* timing reg 1 */
-#ifndef CONFIG_405EP
-#define SDRAM0_ECCCFG 0x94 /* ECC configuration */
-#define SDRAM0_ECCESR 0x98 /* ECC error status */
-#endif
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-
-/*
- * Memory controller registers
- */
-#define SDRAM_CFG0 0x20 /* memory controller options 0 */
-#define SDRAM_CFG1 0x21 /* memory controller options 1 */
-
-#define SDRAM0_BEAR 0x0010 /* bus error address reg */
-#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */
-#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */
-#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */
-#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */
-#define SDRAM0_MCSTS 0x0024 /* memory controller status */
-#define SDRAM0_RTR 0x0030 /* refresh timer register */
-#define SDRAM0_PMIT 0x0034 /* power management idle timer */
-#define SDRAM0_UABBA 0x0038 /* plb UABus base address */
-#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */
-#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */
-#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */
-#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */
-#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */
-#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */
-#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */
-#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */
-#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */
-#define SDRAM0_ECCESR 0x0098 /* ECC error status */
-
-/*
- * Memory Controller Options 0
- */
-#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
-#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
-#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
-#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
-
-/*
- * Memory Controller Options 1
- */
-#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
-#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
-
-/*
- * SDRAM DEVPOT Options
- */
-#define SDRAM_DEVOPT_DLL 0x80000000
-#define SDRAM_DEVOPT_DS 0x40000000
-
-/*
- * SDRAM MCSTS Options
- */
-#define SDRAM_MCSTS_MRSC 0x80000000
-#define SDRAM_MCSTS_SRMS 0x40000000
-#define SDRAM_MCSTS_CIS 0x20000000
-#define SDRAM_MCSTS_IDLE_NOT 0x00000000 /* Mem contr not idle */
-
-/*
- * SDRAM Refresh Timer Register
- */
-#define SDRAM_RTR_RINT_MASK 0xFFFF0000
-#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
-
-/*
- * SDRAM UABus Base Address Reg
- */
-#define SDRAM_UABBA_UBBA_MASK 0x0000000F
-
-/*
- * Memory Bank 0-7 configuration
- */
-#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
-#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
-#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
-#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
-#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
-#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
-#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
-#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
-#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
-#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
-#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
-#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
-#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
-#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
-#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
-
-/*
- * SDRAM TR0 Options
- */
-#define SDRAM_TR0_SDWR_MASK 0x80000000
-#define SDRAM_TR0_SDWR_2_CLK 0x00000000
-#define SDRAM_TR0_SDWR_3_CLK 0x80000000
-#define SDRAM_TR0_SDWD_MASK 0x40000000
-#define SDRAM_TR0_SDWD_0_CLK 0x00000000
-#define SDRAM_TR0_SDWD_1_CLK 0x40000000
-#define SDRAM_TR0_SDCL_MASK 0x01800000
-#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
-#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
-#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
-#define SDRAM_TR0_SDPA_MASK 0x000C0000
-#define SDRAM_TR0_SDPA_2_CLK 0x00040000
-#define SDRAM_TR0_SDPA_3_CLK 0x00080000
-#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
-#define SDRAM_TR0_SDCP_MASK 0x00030000
-#define SDRAM_TR0_SDCP_2_CLK 0x00000000
-#define SDRAM_TR0_SDCP_3_CLK 0x00010000
-#define SDRAM_TR0_SDCP_4_CLK 0x00020000
-#define SDRAM_TR0_SDCP_5_CLK 0x00030000
-#define SDRAM_TR0_SDLD_MASK 0x0000C000
-#define SDRAM_TR0_SDLD_1_CLK 0x00000000
-#define SDRAM_TR0_SDLD_2_CLK 0x00004000
-#define SDRAM_TR0_SDRA_MASK 0x0000001C
-#define SDRAM_TR0_SDRA_6_CLK 0x00000000
-#define SDRAM_TR0_SDRA_7_CLK 0x00000004
-#define SDRAM_TR0_SDRA_8_CLK 0x00000008
-#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
-#define SDRAM_TR0_SDRA_10_CLK 0x00000010
-#define SDRAM_TR0_SDRA_11_CLK 0x00000014
-#define SDRAM_TR0_SDRA_12_CLK 0x00000018
-#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
-#define SDRAM_TR0_SDRD_MASK 0x00000003
-#define SDRAM_TR0_SDRD_2_CLK 0x00000001
-#define SDRAM_TR0_SDRD_3_CLK 0x00000002
-#define SDRAM_TR0_SDRD_4_CLK 0x00000003
-
-/*
- * SDRAM TR1 Options
- */
-#define SDRAM_TR1_RDSS_MASK 0xC0000000
-#define SDRAM_TR1_RDSS_TR0 0x00000000
-#define SDRAM_TR1_RDSS_TR1 0x40000000
-#define SDRAM_TR1_RDSS_TR2 0x80000000
-#define SDRAM_TR1_RDSS_TR3 0xC0000000
-#define SDRAM_TR1_RDSL_MASK 0x00C00000
-#define SDRAM_TR1_RDSL_STAGE1 0x00000000
-#define SDRAM_TR1_RDSL_STAGE2 0x00400000
-#define SDRAM_TR1_RDSL_STAGE3 0x00800000
-#define SDRAM_TR1_RDCD_MASK 0x00000800
-#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
-#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
-#define SDRAM_TR1_RDCT_MASK 0x000001FF
-#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
-#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
-#define SDRAM_TR1_RDCT_MIN 0x00000000
-#define SDRAM_TR1_RDCT_MAX 0x000001FF
-
-/*
- * SDRAM WDDCTR Options
- */
-#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
-#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
-#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
-#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
-#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
-
-/*
- * SDRAM CLKTR Options
- */
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
-#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
-#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
-
-/*
- * SDRAM DLYCAL Options
- */
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR */
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-#if !defined(CONFIG_405EX)
-/*
- * Memory queue defines
- */
-#define SDRAMQ_DCR_BASE 0x040
-
-#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
-#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
-#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
-#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
-#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
-#define SDRAM_CONF1HB_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
-#define SDRAM_CONF1HB_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
-#define SDRAM_CONF1HB_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
-#define SDRAM_CONF1HB_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
-#define SDRAM_CONF1HB_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
-#define SDRAM_CONF1HB_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
-#define SDRAM_CONF1HB_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
-#define SDRAM_CONF1HB_WRCL 0x00000080 /* MCIF Cycle Limit 1 - Bits 22..24 */
-#define SDRAM_CONF1HB_MASK 0x0000F380 /* RPLM & WRCL mask */
-
-#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
-#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
-#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
-#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
-#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
-#define SDRAM_CONF1LL_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
-#define SDRAM_CONF1LL_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
-#define SDRAM_CONF1LL_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
-#define SDRAM_CONF1LL_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
-#define SDRAM_CONF1LL_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
-#define SDRAM_CONF1LL_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
-#define SDRAM_CONF1LL_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
-#define SDRAM_CONF1LL_MASK 0x0000F000 /* RPLM mask */
-
-#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
-#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
-#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
-#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
-#define SDRAM_CONFPATHB_TPEN 0x08000000 /* Transaction Passing Enable - Bit 4 */
-
-#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
-
-/*
- * Memory Bank 0-7 configuration
- */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2)
-#endif /* CONFIG_440SPE */
-#if defined(CONFIG_440SP)
-#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((u32)(n))&0xFF800000))
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((u32)(n))&0xFF800000))
-#endif /* CONFIG_440SP */
-#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
-#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((u32)(n))&0x3FF)<<6)
-#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((u32)(n))>>6)&0x3FF)
-#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
-#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
-#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
-#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
-#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
-#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
-#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
-#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
-#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
-#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
-#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
-#else /* CONFIG_405EX */
-/*
- * XXX - ToDo:
- * Revisit this file to check if all these 405EX defines are correct and
- * can be used in the common 44x_spd_ddr2 code as well. sr, 2008-06-02
- */
-#define SDRAM_RXBAS_SDSZ_MASK PPC_REG_VAL(19, 0xF)
-#define SDRAM_RXBAS_SDSZ_4MB PPC_REG_VAL(19, 0x0)
-#define SDRAM_RXBAS_SDSZ_8MB PPC_REG_VAL(19, 0x1)
-#define SDRAM_RXBAS_SDSZ_16MB PPC_REG_VAL(19, 0x2)
-#define SDRAM_RXBAS_SDSZ_32MB PPC_REG_VAL(19, 0x3)
-#define SDRAM_RXBAS_SDSZ_64MB PPC_REG_VAL(19, 0x4)
-#define SDRAM_RXBAS_SDSZ_128MB PPC_REG_VAL(19, 0x5)
-#define SDRAM_RXBAS_SDSZ_256MB PPC_REG_VAL(19, 0x6)
-#define SDRAM_RXBAS_SDSZ_512MB PPC_REG_VAL(19, 0x7)
-#define SDRAM_RXBAS_SDSZ_1024MB PPC_REG_VAL(19, 0x8)
-#define SDRAM_RXBAS_SDSZ_2048MB PPC_REG_VAL(19, 0x9)
-#define SDRAM_RXBAS_SDSZ_4096MB PPC_REG_VAL(19, 0xA)
-#define SDRAM_RXBAS_SDSZ_8192MB PPC_REG_VAL(19, 0xB)
-#define SDRAM_RXBAS_SDSZ_8 SDRAM_RXBAS_SDSZ_8MB
-#define SDRAM_RXBAS_SDSZ_16 SDRAM_RXBAS_SDSZ_16MB
-#define SDRAM_RXBAS_SDSZ_32 SDRAM_RXBAS_SDSZ_32MB
-#define SDRAM_RXBAS_SDSZ_64 SDRAM_RXBAS_SDSZ_64MB
-#define SDRAM_RXBAS_SDSZ_128 SDRAM_RXBAS_SDSZ_128MB
-#define SDRAM_RXBAS_SDSZ_256 SDRAM_RXBAS_SDSZ_256MB
-#define SDRAM_RXBAS_SDSZ_512 SDRAM_RXBAS_SDSZ_512MB
-#define SDRAM_RXBAS_SDSZ_1024 SDRAM_RXBAS_SDSZ_1024MB
-#define SDRAM_RXBAS_SDSZ_2048 SDRAM_RXBAS_SDSZ_2048MB
-#define SDRAM_RXBAS_SDSZ_4096 SDRAM_RXBAS_SDSZ_4096MB
-#define SDRAM_RXBAS_SDSZ_8192 SDRAM_RXBAS_SDSZ_8192MB
-#define SDRAM_RXBAS_SDAM_MODE0 PPC_REG_VAL(23, 0x0)
-#define SDRAM_RXBAS_SDAM_MODE1 PPC_REG_VAL(23, 0x1)
-#define SDRAM_RXBAS_SDAM_MODE2 PPC_REG_VAL(23, 0x2)
-#define SDRAM_RXBAS_SDAM_MODE3 PPC_REG_VAL(23, 0x3)
-#define SDRAM_RXBAS_SDAM_MODE4 PPC_REG_VAL(23, 0x4)
-#define SDRAM_RXBAS_SDAM_MODE5 PPC_REG_VAL(23, 0x5)
-#define SDRAM_RXBAS_SDAM_MODE6 PPC_REG_VAL(23, 0x6)
-#define SDRAM_RXBAS_SDAM_MODE7 PPC_REG_VAL(23, 0x7)
-#define SDRAM_RXBAS_SDAM_MODE8 PPC_REG_VAL(23, 0x8)
-#define SDRAM_RXBAS_SDAM_MODE9 PPC_REG_VAL(23, 0x9)
-#define SDRAM_RXBAS_SDBE_DISABLE PPC_REG_VAL(31, 0x0)
-#define SDRAM_RXBAS_SDBE_ENABLE PPC_REG_VAL(31, 0x1)
-#endif /* CONFIG_405EX */
-
-/*
- * Memory controller registers
- */
-#define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */
-#define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */
-#define SDRAM_BEARL 0x02 /* PLB bus error address low */
-#define SDRAM_BEARH 0x03 /* PLB bus error address high */
-#define SDRAM_WMIRQ 0x06 /* PLB write master interrupt (read/clear) */
-#define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */
-#define SDRAM_PLBOPT 0x08 /* PLB slave options */
-#define SDRAM_PUABA 0x09 /* PLB upper address base */
-#ifndef CONFIG_405EX
-#define SDRAM_MCSTAT 0x14 /* memory controller status */
-#else
-#define SDRAM_MCSTAT 0x1F /* memory controller status */
-#endif
-#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
-#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
-#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
-#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
-#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
-#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
-#define SDRAM_CODT 0x26 /* on die termination for controller */
-#define SDRAM_VVPR 0x27 /* variable VRef programmming */
-#define SDRAM_OPARS 0x28 /* on chip driver control setup */
-#define SDRAM_OPART 0x29 /* on chip driver control trigger */
-#define SDRAM_RTR 0x30 /* refresh timer */
-#define SDRAM_PMIT 0x34 /* power management idle timer */
-#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
-#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
-#define SDRAM_MB2CF 0x48
-#define SDRAM_MB3CF 0x4C
-#define SDRAM_INITPLR0 0x50 /* manual initialization control */
-#define SDRAM_INITPLR1 0x51 /* manual initialization control */
-#define SDRAM_INITPLR2 0x52 /* manual initialization control */
-#define SDRAM_INITPLR3 0x53 /* manual initialization control */
-#define SDRAM_INITPLR4 0x54 /* manual initialization control */
-#define SDRAM_INITPLR5 0x55 /* manual initialization control */
-#define SDRAM_INITPLR6 0x56 /* manual initialization control */
-#define SDRAM_INITPLR7 0x57 /* manual initialization control */
-#define SDRAM_INITPLR8 0x58 /* manual initialization control */
-#define SDRAM_INITPLR9 0x59 /* manual initialization control */
-#define SDRAM_INITPLR10 0x5a /* manual initialization control */
-#define SDRAM_INITPLR11 0x5b /* manual initialization control */
-#define SDRAM_INITPLR12 0x5c /* manual initialization control */
-#define SDRAM_INITPLR13 0x5d /* manual initialization control */
-#define SDRAM_INITPLR14 0x5e /* manual initialization control */
-#define SDRAM_INITPLR15 0x5f /* manual initialization control */
-#define SDRAM_RQDC 0x70 /* read DQS delay control */
-#define SDRAM_RFDC 0x74 /* read feedback delay control */
-#define SDRAM_RDCC 0x78 /* read data capture control */
-#define SDRAM_DLCR 0x7A /* delay line calibration */
-#define SDRAM_CLKTR 0x80 /* DDR clock timing */
-#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
-#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
-#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
-#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
-#define SDRAM_MMODE 0x88 /* memory mode */
-#define SDRAM_MEMODE 0x89 /* memory extended mode */
-#define SDRAM_ECCES 0x98 /* ECC error status */
-#define SDRAM_CID 0xA4 /* core ID */
-#ifndef CONFIG_405EX
-#define SDRAM_RID 0xA8 /* revision ID */
-#endif
-#define SDRAM_FCSR 0xB0 /* feedback calibration status */
-#define SDRAM_RTSR 0xB1 /* run time status tracking */
-#ifdef CONFIG_405EX
-#define SDRAM_RID 0xF8 /* revision ID */
-#endif
-
-/*
- * Memory Controller Bus Error Status
- */
-#define SDRAM_BESR_MASK PPC_REG_VAL(7, 0xFF)
-#define SDRAM_BESR_M0ID_MASK PPC_REG_VAL(3, 0xF)
-#define SDRAM_BESR_M0ID_ICU PPC_REG_VAL(3, 0x0)
-#define SDRAM_BESR_M0ID_PCIE0 PPC_REG_VAL(3, 0x1)
-#define SDRAM_BESR_M0ID_PCIE1 PPC_REG_VAL(3, 0x2)
-#define SDRAM_BESR_M0ID_DMA PPC_REG_VAL(3, 0x3)
-#define SDRAM_BESR_M0ID_DCU PPC_REG_VAL(3, 0x4)
-#define SDRAM_BESR_M0ID_OPB PPC_REG_VAL(3, 0x5)
-#define SDRAM_BESR_M0ID_MAL PPC_REG_VAL(3, 0x6)
-#define SDRAM_BESR_M0ID_SEC PPC_REG_VAL(3, 0x7)
-#define SDRAM_BESR_M0ET_MASK PPC_REG_VAL(6, 0x7)
-#define SDRAM_BESR_M0ET_NONE PPC_REG_VAL(6, 0x0)
-#define SDRAM_BESR_M0ET_ECC PPC_REG_VAL(6, 0x1)
-#define SDRAM_BESR_M0RW_WRITE PPC_REG_VAL(7, 0)
-#define SDRAM_BESR_M0RW_READ PPC_REG_VAL(8, 1)
-
-/*
- * Memory Controller Status
- */
-#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
-#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
-#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
-#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
-#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
-
-/*
- * Memory Controller Options 1
- */
-#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
-#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
-#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
-#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((u32)(n))>>28)&0x3)
-#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
-#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
-#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
-#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
-#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
-#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
-#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
-#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
-#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
-#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
-#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
-#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
-#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
-#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
-#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
-#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
-#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
-#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
-#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
-#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
-#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
-#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
-#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
-#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
-
-/*
- * Memory Controller Options 2
- */
-#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
-#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
-#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
-#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
-#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
-#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
-#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
-#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
-#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
-#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
-#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
-#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
-#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
-
-/*
- * SDRAM Refresh Timer Register
- */
-#define SDRAM_RTR_RINT_MASK 0xFFF80000
-#define SDRAM_RTR_RINT_ENCODE(n) ((((u32)(n))&0xFFF8)<<16)
-#define SDRAM_RTR_RINT_DECODE(n) ((((u32)(n))>>16)&0xFFF8)
-
-/*
- * SDRAM Read DQS Delay Control Register
- */
-#define SDRAM_RQDC_RQDE_MASK 0x80000000
-#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
-#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
-#define SDRAM_RQDC_RQFD_MASK 0x000001FF
-#define SDRAM_RQDC_RQFD_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
-
-#define SDRAM_RQDC_RQFD_MAX 0x1FF
-
-/*
- * SDRAM Read Data Capture Control Register
- */
-#define SDRAM_RDCC_RDSS_MASK 0xC0000000
-#define SDRAM_RDCC_RDSS_T1 0x00000000
-#define SDRAM_RDCC_RDSS_T2 0x40000000
-#define SDRAM_RDCC_RDSS_T3 0x80000000
-#define SDRAM_RDCC_RDSS_T4 0xC0000000
-#define SDRAM_RDCC_RSAE_MASK 0x00000001
-#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
-#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
-#define SDRAM_RDCC_RDSS_ENCODE(n) ((((u32)(n))&0x03)<<30)
-#define SDRAM_RDCC_RDSS_DECODE(n) ((((u32)(n))>>30)&0x03)
-
-/*
- * SDRAM Read Feedback Delay Control Register
- */
-#define SDRAM_RFDC_ARSE_MASK 0x80000000
-#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
-#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
-#define SDRAM_RFDC_RFOS_MASK 0x007F0000
-#define SDRAM_RFDC_RFOS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000007FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((u32)(n))&0x7FF)<<0)
-
-#define SDRAM_RFDC_RFFD_MAX 0x7FF
-
-/*
- * SDRAM Delay Line Calibration Register
- */
-#define SDRAM_DLCR_DCLM_MASK 0x80000000
-#define SDRAM_DLCR_DCLM_MANUAL 0x80000000
-#define SDRAM_DLCR_DCLM_AUTO 0x00000000
-#define SDRAM_DLCR_DLCR_MASK 0x08000000
-#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
-#define SDRAM_DLCR_DLCR_IDLE 0x00000000
-#define SDRAM_DLCR_DLCS_MASK 0x07000000
-#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
-#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
-#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
-#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
-#define SDRAM_DLCR_DLCS_ERROR 0x04000000
-#define SDRAM_DLCR_DLCV_MASK 0x000001FF
-#define SDRAM_DLCR_DLCV_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
-#define SDRAM_DLCR_DLCV_DECODE(n) ((((u32)(n))>>0)&0x1FF)
-
-/*
- * SDRAM Memory On Die Terimination Control Register
- */
-#define SDRAM_MODT_ODTON_DISABLE PPC_REG_VAL(0, 0)
-#define SDRAM_MODT_ODTON_ENABLE PPC_REG_VAL(0, 1)
-#define SDRAM_MODT_EB1W_DISABLE PPC_REG_VAL(1, 0)
-#define SDRAM_MODT_EB1W_ENABLE PPC_REG_VAL(1, 1)
-#define SDRAM_MODT_EB1R_DISABLE PPC_REG_VAL(2, 0)
-#define SDRAM_MODT_EB1R_ENABLE PPC_REG_VAL(2, 1)
-#define SDRAM_MODT_EB0W_DISABLE PPC_REG_VAL(7, 0)
-#define SDRAM_MODT_EB0W_ENABLE PPC_REG_VAL(7, 1)
-#define SDRAM_MODT_EB0R_DISABLE PPC_REG_VAL(8, 0)
-#define SDRAM_MODT_EB0R_ENABLE PPC_REG_VAL(8, 1)
-
-/*
- * SDRAM Controller On Die Termination Register
- */
-#define SDRAM_CODT_ODT_ON PPC_REG_VAL(0, 1)
-#define SDRAM_CODT_ODT_OFF PPC_REG_VAL(0, 0)
-#define SDRAM_CODT_RK1W_ON PPC_REG_VAL(1, 1)
-#define SDRAM_CODT_RK1W_OFF PPC_REG_VAL(1, 0)
-#define SDRAM_CODT_RK1R_ON PPC_REG_VAL(2, 1)
-#define SDRAM_CODT_RK1R_OFF PPC_REG_VAL(2, 0)
-#define SDRAM_CODT_RK0W_ON PPC_REG_VAL(7, 1)
-#define SDRAM_CODT_RK0W_OFF PPC_REG_VAL(7, 0)
-#define SDRAM_CODT_RK0R_ON PPC_REG_VAL(8, 1)
-#define SDRAM_CODT_RK0R_OFF PPC_REG_VAL(8, 0)
-#define SDRAM_CODT_ODTSH_NORMAL PPC_REG_VAL(10, 0)
-#define SDRAM_CODT_ODTSH_REMOVE_ONE_AT_END PPC_REG_VAL(10, 1)
-#define SDRAM_CODT_ODTSH_ADD_ONE_AT_START PPC_REG_VAL(10, 2)
-#define SDRAM_CODT_ODTSH_SHIFT_ONE_EARLIER PPC_REG_VAL(10, 3)
-#define SDRAM_CODT_CODTZ_75OHM PPC_REG_VAL(11, 0)
-#define SDRAM_CODT_CKEG_ON PPC_REG_VAL(12, 1)
-#define SDRAM_CODT_CKEG_OFF PPC_REG_VAL(12, 0)
-#define SDRAM_CODT_CTLG_ON PPC_REG_VAL(13, 1)
-#define SDRAM_CODT_CTLG_OFF PPC_REG_VAL(13, 0)
-#define SDRAM_CODT_FBDG_ON PPC_REG_VAL(14, 1)
-#define SDRAM_CODT_FBDG_OFF PPC_REG_VAL(14, 0)
-#define SDRAM_CODT_FBRG_ON PPC_REG_VAL(15, 1)
-#define SDRAM_CODT_FBRG_OFF PPC_REG_VAL(15, 0)
-#define SDRAM_CODT_CKLZ_36OHM PPC_REG_VAL(18, 1)
-#define SDRAM_CODT_CKLZ_18OHM PPC_REG_VAL(18, 0)
-#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK PPC_REG_VAL(26, 1)
-#define SDRAM_CODT_DQS_2_5_V_DDR1 PPC_REG_VAL(26, 0)
-#define SDRAM_CODT_DQS_1_8_V_DDR2 PPC_REG_VAL(26, 1)
-#define SDRAM_CODT_DQS_MASK PPC_REG_VAL(27, 1)
-#define SDRAM_CODT_DQS_DIFFERENTIAL PPC_REG_VAL(27, 0)
-#define SDRAM_CODT_DQS_SINGLE_END PPC_REG_VAL(27, 1)
-#define SDRAM_CODT_CKSE_DIFFERENTIAL PPC_REG_VAL(28, 0)
-#define SDRAM_CODT_CKSE_SINGLE_END PPC_REG_VAL(28, 1)
-#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END PPC_REG_VAL(29, 1)
-#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END PPC_REG_VAL(30, 1)
-#define SDRAM_CODT_IO_HIZ PPC_REG_VAL(31, 0)
-#define SDRAM_CODT_IO_NMODE PPC_REG_VAL(31, 1)
-
-/*
- * SDRAM Initialization Preload Register
- */
-#define SDRAM_INITPLR_ENABLE PPC_REG_VAL(0, 1)
-#define SDRAM_INITPLR_DISABLE PPC_REG_VAL(0, 0)
-#define SDRAM_INITPLR_IMWT_MASK PPC_REG_VAL(8, 0xFF)
-#define SDRAM_INITPLR_IMWT_ENCODE(n) PPC_REG_VAL(8, \
- (static_cast(u32, \
- n)) \
- & 0xFF)
-#define SDRAM_INITPLR_ICMD_MASK PPC_REG_VAL(12, 0x7)
-#define SDRAM_INITPLR_ICMD_ENCODE(n) PPC_REG_VAL(12, \
- (static_cast(u32, \
- n)) \
- & 0x7)
-#define SDRAM_INITPLR_IBA_MASK PPC_REG_VAL(15, 0x7)
-#define SDRAM_INITPLR_IBA_ENCODE(n) PPC_REG_VAL(15, \
- (static_cast(u32, \
- n)) \
- & 0x7)
-#define SDRAM_INITPLR_IMA_MASK PPC_REG_VAL(31, 0x7FFF)
-#define SDRAM_INITPLR_IMA_ENCODE(n) PPC_REG_VAL(31, \
- (static_cast(u32, \
- n)) \
- & 0x7FFF)
-
-/*
- * JEDEC DDR Initialization Commands
- */
-#define JEDEC_CMD_NOP 7
-#define JEDEC_CMD_PRECHARGE 2
-#define JEDEC_CMD_REFRESH 1
-#define JEDEC_CMD_EMR 0
-#define JEDEC_CMD_READ 5
-#define JEDEC_CMD_WRITE 4
-
-/*
- * JEDEC Precharge Command Memory Address Arguments
- */
-#define JEDEC_MA_PRECHARGE_ONE (0 << 10)
-#define JEDEC_MA_PRECHARGE_ALL (1 << 10)
-
-/*
- * JEDEC DDR EMR Command Bank Address Arguments
- */
-#define JEDEC_BA_MR 0
-#define JEDEC_BA_EMR 1
-#define JEDEC_BA_EMR2 2
-#define JEDEC_BA_EMR3 3
-
-/*
- * JEDEC DDR Mode Register
- */
-#define JEDEC_MA_MR_PDMODE_FAST_EXIT (0 << 12)
-#define JEDEC_MA_MR_PDMODE_SLOW_EXIT (1 << 12)
-#define JEDEC_MA_MR_WR_MASK (0x7 << 9)
-#define JEDEC_MA_MR_WR_DDR1 (0x0 << 9)
-#define JEDEC_MA_MR_WR_DDR2_2_CYC (0x1 << 9)
-#define JEDEC_MA_MR_WR_DDR2_3_CYC (0x2 << 9)
-#define JEDEC_MA_MR_WR_DDR2_4_CYC (0x3 << 9)
-#define JEDEC_MA_MR_WR_DDR2_5_CYC (0x4 << 9)
-#define JEDEC_MA_MR_WR_DDR2_6_CYC (0x5 << 9)
-#define JEDEC_MA_MR_DLL_RESET (1 << 8)
-#define JEDEC_MA_MR_MODE_NORMAL (0 << 8)
-#define JEDEC_MA_MR_MODE_TEST (1 << 8)
-#define JEDEC_MA_MR_CL_MASK (0x7 << 4)
-#define JEDEC_MA_MR_CL_DDR1_2_0_CLK (0x2 << 4)
-#define JEDEC_MA_MR_CL_DDR1_2_5_CLK (0x6 << 4)
-#define JEDEC_MA_MR_CL_DDR1_3_0_CLK (0x3 << 4)
-#define JEDEC_MA_MR_CL_DDR2_2_0_CLK (0x2 << 4)
-#define JEDEC_MA_MR_CL_DDR2_3_0_CLK (0x3 << 4)
-#define JEDEC_MA_MR_CL_DDR2_4_0_CLK (0x4 << 4)
-#define JEDEC_MA_MR_CL_DDR2_5_0_CLK (0x5 << 4)
-#define JEDEC_MA_MR_CL_DDR2_6_0_CLK (0x6 << 4)
-#define JEDEC_MA_MR_CL_DDR2_7_0_CLK (0x7 << 4)
-#define JEDEC_MA_MR_BTYP_SEQUENTIAL (0 << 3)
-#define JEDEC_MA_MR_BTYP_INTERLEAVED (1 << 3)
-#define JEDEC_MA_MR_BLEN_MASK (0x7 << 0)
-#define JEDEC_MA_MR_BLEN_4 (2 << 0)
-#define JEDEC_MA_MR_BLEN_8 (3 << 0)
-
-/*
- * JEDEC DDR Extended Mode Register
- */
-#define JEDEC_MA_EMR_OUTPUT_MASK (1 << 12)
-#define JEDEC_MA_EMR_OUTPUT_ENABLE (0 << 12)
-#define JEDEC_MA_EMR_OUTPUT_DISABLE (1 << 12)
-#define JEDEC_MA_EMR_RQDS_MASK (1 << 11)
-#define JEDEC_MA_EMR_RDQS_DISABLE (0 << 11)
-#define JEDEC_MA_EMR_RDQS_ENABLE (1 << 11)
-#define JEDEC_MA_EMR_DQS_MASK (1 << 10)
-#define JEDEC_MA_EMR_DQS_DISABLE (1 << 10)
-#define JEDEC_MA_EMR_DQS_ENABLE (0 << 10)
-#define JEDEC_MA_EMR_OCD_MASK (0x7 << 7)
-#define JEDEC_MA_EMR_OCD_EXIT (0 << 7)
-#define JEDEC_MA_EMR_OCD_ENTER (7 << 7)
-#define JEDEC_MA_EMR_AL_DDR1_0_CYC (0 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_1_CYC (1 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_2_CYC (2 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_3_CYC (3 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_4_CYC (4 << 3)
-#define JEDEC_MA_EMR_RTT_MASK (0x11 << 2)
-#define JEDEC_MA_EMR_RTT_DISABLED (0x00 << 2)
-#define JEDEC_MA_EMR_RTT_75OHM (0x01 << 2)
-#define JEDEC_MA_EMR_RTT_150OHM (0x10 << 2)
-#define JEDEC_MA_EMR_RTT_50OHM (0x11 << 2)
-#define JEDEC_MA_EMR_ODS_MASK (1 << 1)
-#define JEDEC_MA_EMR_ODS_NORMAL (0 << 1)
-#define JEDEC_MA_EMR_ODS_WEAK (1 << 1)
-#define JEDEC_MA_EMR_DLL_MASK (1 << 0)
-#define JEDEC_MA_EMR_DLL_ENABLE (0 << 0)
-#define JEDEC_MA_EMR_DLL_DISABLE (1 << 0)
-
-/*
- * JEDEC DDR Extended Mode Register 2
- */
-#define JEDEC_MA_EMR2_TEMP_COMMERCIAL (0 << 7)
-#define JEDEC_MA_EMR2_TEMP_INDUSTRIAL (1 << 7)
-
-/*
- * SDRAM Mode Register (Corresponds 1:1 w/ JEDEC Mode Register)
- */
-#define SDRAM_MMODE_WR_MASK JEDEC_MA_MR_WR_MASK
-#define SDRAM_MMODE_WR_DDR1 JEDEC_MA_MR_WR_DDR1
-#define SDRAM_MMODE_WR_DDR2_2_CYC JEDEC_MA_MR_WR_DDR2_2_CYC
-#define SDRAM_MMODE_WR_DDR2_3_CYC JEDEC_MA_MR_WR_DDR2_3_CYC
-#define SDRAM_MMODE_WR_DDR2_4_CYC JEDEC_MA_MR_WR_DDR2_4_CYC
-#define SDRAM_MMODE_WR_DDR2_5_CYC JEDEC_MA_MR_WR_DDR2_5_CYC
-#define SDRAM_MMODE_WR_DDR2_6_CYC JEDEC_MA_MR_WR_DDR2_6_CYC
-#define SDRAM_MMODE_DCL_MASK JEDEC_MA_MR_CL_MASK
-#define SDRAM_MMODE_DCL_DDR1_2_0_CLK JEDEC_MA_MR_CL_DDR1_2_0_CLK
-#define SDRAM_MMODE_DCL_DDR1_2_5_CLK JEDEC_MA_MR_CL_DDR1_2_5_CLK
-#define SDRAM_MMODE_DCL_DDR1_3_0_CLK JEDEC_MA_MR_CL_DDR1_3_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_2_0_CLK JEDEC_MA_MR_CL_DDR2_2_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_3_0_CLK JEDEC_MA_MR_CL_DDR2_3_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_4_0_CLK JEDEC_MA_MR_CL_DDR2_4_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_5_0_CLK JEDEC_MA_MR_CL_DDR2_5_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_6_0_CLK JEDEC_MA_MR_CL_DDR2_6_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_7_0_CLK JEDEC_MA_MR_CL_DDR2_7_0_CLK
-#define SDRAM_MMODE_BTYP_SEQUENTIAL JEDEC_MA_MR_BTYP_SEQUENTIAL
-#define SDRAM_MMODE_BTYP_INTERLEAVED JEDEC_MA_MR_BTYP_INTERLEAVED
-#define SDRAM_MMODE_BLEN_MASK JEDEC_MA_MR_BLEN_MASK
-#define SDRAM_MMODE_BLEN_4 JEDEC_MA_MR_BLEN_4
-#define SDRAM_MMODE_BLEN_8 JEDEC_MA_MR_BLEN_8
-
-/*
- * SDRAM Extended Mode Register (Corresponds 1:1 w/ JEDEC Extended
- * Mode Register)
- */
-#define SDRAM_MEMODE_QOFF_MASK JEDEC_MA_EMR_OUTPUT_MASK
-#define SDRAM_MEMODE_QOFF_DISABLE JEDEC_MA_EMR_OUTPUT_DISABLE
-#define SDRAM_MEMODE_QOFF_ENABLE JEDEC_MA_EMR_OUTPUT_ENABLE
-#define SDRAM_MEMODE_RDQS_MASK JEDEC_MA_EMR_RQDS_MASK
-#define SDRAM_MEMODE_RDQS_DISABLE JEDEC_MA_EMR_RDQS_DISABLE
-#define SDRAM_MEMODE_RDQS_ENABLE JEDEC_MA_EMR_RDQS_ENABLE
-#define SDRAM_MEMODE_DQS_MASK JEDEC_MA_EMR_DQS_MASK
-#define SDRAM_MEMODE_DQS_DISABLE JEDEC_MA_EMR_DQS_DISABLE
-#define SDRAM_MEMODE_DQS_ENABLE JEDEC_MA_EMR_DQS_ENABLE
-#define SDRAM_MEMODE_AL_DDR1_0_CYC JEDEC_MA_EMR_AL_DDR1_0_CYC
-#define SDRAM_MEMODE_AL_DDR2_1_CYC JEDEC_MA_EMR_AL_DDR2_1_CYC
-#define SDRAM_MEMODE_AL_DDR2_2_CYC JEDEC_MA_EMR_AL_DDR2_2_CYC
-#define SDRAM_MEMODE_AL_DDR2_3_CYC JEDEC_MA_EMR_AL_DDR2_3_CYC
-#define SDRAM_MEMODE_AL_DDR2_4_CYC JEDEC_MA_EMR_AL_DDR2_4_CYC
-#define SDRAM_MEMODE_RTT_MASK JEDEC_MA_EMR_RTT_MASK
-#define SDRAM_MEMODE_RTT_DISABLED JEDEC_MA_EMR_RTT_DISABLED
-#define SDRAM_MEMODE_RTT_75OHM JEDEC_MA_EMR_RTT_75OHM
-#define SDRAM_MEMODE_RTT_150OHM JEDEC_MA_EMR_RTT_150OHM
-#define SDRAM_MEMODE_RTT_50OHM JEDEC_MA_EMR_RTT_50OHM
-#define SDRAM_MEMODE_DIC_MASK JEDEC_MA_EMR_ODS_MASK
-#define SDRAM_MEMODE_DIC_NORMAL JEDEC_MA_EMR_ODS_NORMAL
-#define SDRAM_MEMODE_DIC_WEAK JEDEC_MA_EMR_ODS_WEAK
-#define SDRAM_MEMODE_DLL_MASK JEDEC_MA_EMR_DLL_MASK
-#define SDRAM_MEMODE_DLL_DISABLE JEDEC_MA_EMR_DLL_DISABLE
-#define SDRAM_MEMODE_DLL_ENABLE JEDEC_MA_EMR_DLL_ENABLE
-
-/*
- * SDRAM Clock Timing Register
- */
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
-#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
-#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000
-
-/*
- * SDRAM Write Timing Register
- */
-#define SDRAM_WRDTR_LLWP_MASK 0x10000000
-#define SDRAM_WRDTR_LLWP_DIS 0x10000000
-#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
-#define SDRAM_WRDTR_WTR_MASK 0x0E000000
-#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
-#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
-#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
-#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
-
-/*
- * SDRAM SDTR1 Options
- */
-#define SDRAM_SDTR1_LDOF_MASK 0x80000000
-#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
-#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
-#define SDRAM_SDTR1_RTW_MASK 0x00F00000
-#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
-#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
-#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
-#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
-#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
-#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
-#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
-#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
-
-/*
- * SDRAM SDTR2 Options
- */
-#define SDRAM_SDTR2_RCD_MASK 0xF0000000
-#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
-#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
-#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
-#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
-#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
-#define SDRAM_SDTR2_WTR_MASK 0x0F000000
-#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
-#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
-#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
-#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
-#define SDRAM_SDTR3_WTR_ENCODE(n) ((((u32)(n))&0xF)<<24)
-#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
-#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
-#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
-#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
-#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
-#define SDRAM_SDTR2_WPC_MASK 0x0000F000
-#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
-#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
-#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
-#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
-#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
-#define SDRAM_SDTR3_WPC_ENCODE(n) ((((u32)(n))&0xF)<<12)
-#define SDRAM_SDTR2_RPC_MASK 0x00000F00
-#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
-#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
-#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
-#define SDRAM_SDTR2_RP_MASK 0x000000F0
-#define SDRAM_SDTR2_RP_3_CLK 0x00000030
-#define SDRAM_SDTR2_RP_4_CLK 0x00000040
-#define SDRAM_SDTR2_RP_5_CLK 0x00000050
-#define SDRAM_SDTR2_RP_6_CLK 0x00000060
-#define SDRAM_SDTR2_RP_7_CLK 0x00000070
-#define SDRAM_SDTR2_RRD_MASK 0x0000000F
-#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
-#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
-
-/*
- * SDRAM SDTR3 Options
- */
-#define SDRAM_SDTR3_RAS_MASK 0x1F000000
-#define SDRAM_SDTR3_RAS_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define SDRAM_SDTR3_RC_MASK 0x001F0000
-#define SDRAM_SDTR3_RC_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define SDRAM_SDTR3_XCS_MASK 0x00001F00
-#define SDRAM_SDTR3_XCS 0x00000D00
-#define SDRAM_SDTR3_RFC_MASK 0x0000003F
-#define SDRAM_SDTR3_RFC_ENCODE(n) ((((u32)(n))&0x3F)<<0)
-
-/*
- * ECC Error Status
- */
-#define SDRAM_ECCES_MASK PPC_REG_VAL(21, 0x3FFFFF)
-#define SDRAM_ECCES_BNCE_MASK PPC_REG_VAL(15, 0xFFFF)
-#define SDRAM_ECCES_BNCE_ENCODE(lane) PPC_REG_VAL(((lane) & 0xF), 1)
-#define SDRAM_ECCES_CKBER_MASK PPC_REG_VAL(17, 0x3)
-#define SDRAM_ECCES_CKBER_NONE PPC_REG_VAL(17, 0)
-#define SDRAM_ECCES_CKBER_16_ECC_0_3 PPC_REG_VAL(17, 2)
-#define SDRAM_ECCES_CKBER_32_ECC_0_3 PPC_REG_VAL(17, 1)
-#define SDRAM_ECCES_CKBER_32_ECC_4_8 PPC_REG_VAL(17, 2)
-#define SDRAM_ECCES_CKBER_32_ECC_0_8 PPC_REG_VAL(17, 3)
-#define SDRAM_ECCES_CE PPC_REG_VAL(18, 1)
-#define SDRAM_ECCES_UE PPC_REG_VAL(19, 1)
-#define SDRAM_ECCES_BKNER_MASK PPC_REG_VAL(21, 0x3)
-#define SDRAM_ECCES_BK0ER PPC_REG_VAL(20, 1)
-#define SDRAM_ECCES_BK1ER PPC_REG_VAL(21, 1)
-
-/*
- * Memory Bank 0-1 configuration
- */
-#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
-#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
-#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
-#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
-#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
-#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
-#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
-#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
-#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
-#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
-#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
-#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
-
-#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
-#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
-#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
-#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
-#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
-
-#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
-
-#if defined(CONFIG_SDRAM_PPC4xx_DENALI_DDR2)
-/*
- * SDRAM Controller
- */
-#define DDR0_00 0x00
-#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL 0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n) ((((u32)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0 0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1 0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2 0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3 0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4 0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5 0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6 0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7 0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_01 0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((u32)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((u32)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK 0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n) ((((u32)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
-
-#define DDR0_02 0x02
-#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((u32)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n) ((((u32)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((u32)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n) ((((u32)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_02_START_MASK 0x00000001
-#define DDR0_02_START_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n) ((((u32)(n))>>0)&0x1)
-#define DDR0_02_START_OFF 0x00000000
-#define DDR0_02_START_ON 0x00000001
-
-#define DDR0_03 0x03
-#define DDR0_03_BSTLEN_MASK 0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK 0x00070000
-#define DDR0_03_CASLAT_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK 0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n) ((((u32)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n) ((((u32)(n))>>0)&0xF)
-
-#define DDR0_04 0x04
-#define DDR0_04_TRC_MASK 0x1F000000
-#define DDR0_04_TRC_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK 0x00070000
-#define DDR0_04_TRRD_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK 0x00000700
-#define DDR0_04_TRTP_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n) ((((u32)(n))>>8)&0x7)
-
-#define DDR0_05 0x05
-#define DDR0_05_TMRD_MASK 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK 0x00070000
-#define DDR0_05_TEMRS_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK 0x00000F00
-#define DDR0_05_TRP_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK 0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n) ((((u32)(n))>>0)&0xFF)
-
-#define DDR0_06 0x06
-#define DDR0_06_WRITEINTERP_MASK 0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK 0x00070000
-#define DDR0_06_TWTR_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n) ((((u32)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_07 0x07
-#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n) ((((u32)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((u32)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK 0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_08 0x08
-#define DDR0_08_WRLAT_MASK 0x07000000
-#define DDR0_08_WRLAT_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK 0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n) ((((u32)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
-#define DDR0_08_DDRII_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_09 0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK 0x00030000
-#define DDR0_09_RTT_0_ENCODE(n) ((((u32)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n) ((((u32)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_10 0x0A
-#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK 0x00000300
-#define DDR0_10_CS_MAP_NO_MEM 0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n) ((((u32)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n) ((((u32)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((u32)(n))>>0)&0x1F)
-
-#define DDR0_11 0x0B
-#define DDR0_11_SREFRESH_MASK 0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK 0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n) ((((u32)(n))>>8)&0xFF)
-
-#define DDR0_12 0x0C
-#define DDR0_12_TCKE_MASK 0x0000007
-#define DDR0_12_TCKE_ENCODE(n) ((((u32)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n) ((((u32)(n))>>0)&0x7)
-
-#define DDR0_14 0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK 0x00010000
-#define DDR0_14_REDUC_64BITS 0x00000000
-#define DDR0_14_REDUC_32BITS 0x00010000
-#define DDR0_14_REDUC_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((u32)(n))>>8)&0x1)
-
-#define DDR0_17 0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n) ((((u32)(n))>>8)&0x7F)
-
-#define DDR0_18 0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_19 0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_20 0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_21 0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_22 0x16
-#define DDR0_22_CTRL_RAW_MASK 0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000
-#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000
-#define DDR0_22_CTRL_RAW_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_23 0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n) ((((u32)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_24 0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((u32)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((u32)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((u32)(n))>>0)&0x3)
-
-#define DDR0_25 0x19
-#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((u32)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((u32)(n))>>0)&0x3FF)
-
-#define DDR0_26 0x1A
-#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
-#define DDR0_26_TREF_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
-
-#define DDR0_27 0x1B
-#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK 0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
-
-#define DDR0_28 0x1C
-#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
-
-#define DDR0_31 0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
-
-#define DDR0_32 0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33 0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_34 0x22
-#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35 0x23
-#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_36 0x24
-#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37 0x25
-#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38 0x26
-#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39 0x27
-#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_40 0x28
-#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41 0x29
-#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42 0x2A
-#define DDR0_42_ADDR_PINS_MASK 0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((u32)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((u32)(n))>>0)&0xF)
-
-#define DDR0_43 0x2B
-#define DDR0_43_TWR_MASK 0x07000000
-#define DDR0_43_TWR_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK 0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n) ((((u32)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n) ((((u32)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((u32)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_44 0x2C
-#define DDR0_44_TRCD_MASK 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n) ((((u32)(n))>>0)&0xFF)
-
-#endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
-
-#ifndef __ASSEMBLY__
-/*
- * Prototypes
- */
-inline void ppc4xx_ibm_ddr2_register_dump(void);
-u32 mfdcr_any(u32);
-void mtdcr_any(u32, u32);
-u32 ddr_wrdtr(u32);
-u32 ddr_clktr(u32);
-void spd_ddr_init_hang(void);
-u32 DQS_autocalibration(void);
-phys_size_t sdram_memsize(void);
-void dcbz_area(u32 start_address, u32 num_bytes);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _PPC4xx_SDRAM_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PPC4xx_UIC_H_
-#define _PPC4xx_UIC_H_
-
-/*
- * Define the number of UIC's
- */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define UIC_MAX 4
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UIC_MAX 3
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define UIC_MAX 2
-#else
-#define UIC_MAX 1
-#endif
-
-#define IRQ_MAX (UIC_MAX * 32)
-
-/*
- * UIC register
- */
-#define UIC_SR 0x0 /* UIC status */
-#define UIC_ER 0x2 /* UIC enable */
-#define UIC_CR 0x3 /* UIC critical */
-#define UIC_PR 0x4 /* UIC polarity */
-#define UIC_TR 0x5 /* UIC triggering */
-#define UIC_MSR 0x6 /* UIC masked status */
-#define UIC_VR 0x7 /* UIC vector */
-#define UIC_VCR 0x8 /* UIC vector configuration */
-
-/*
- * On 440GX we use the UICB0 as UIC0. Its the root UIC where all other UIC's
- * are cascaded on. With this trick we can use the common UIC code for 440GX
- * too.
- */
-#if defined(CONFIG_440GX)
-#define UIC0_DCR_BASE 0x200
-#define UIC1_DCR_BASE 0xc0
-#define UIC2_DCR_BASE 0xd0
-#define UIC3_DCR_BASE 0x210
-#else
-#define UIC0_DCR_BASE 0xc0
-#define UIC1_DCR_BASE 0xd0
-#define UIC2_DCR_BASE 0xe0
-#define UIC3_DCR_BASE 0xf0
-#endif
-
-#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
-
-#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-
-#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */
-#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */
-#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
-#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
-#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
-#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */
-#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
-
-/*
- * Now the interrupt vector definitions. They are different for most of
- * the 4xx variants, so we need some more #ifdef's here. No mask
- * definitions anymore here. For this please use the UIC_MASK macro below.
- *
- * Note: Please only define the interrupts really used in U-Boot here.
- * Those are the cascading and EMAC/MAL related interrupt.
- */
-
-#if defined(CONFIG_405EP) || defined(CONFIG_405GP)
-#define VECNUM_MAL_SERR 10
-#define VECNUM_MAL_TXEOB 11
-#define VECNUM_MAL_RXEOB 12
-#define VECNUM_MAL_TXDE 13
-#define VECNUM_MAL_RXDE 14
-#define VECNUM_ETH0 15
-#define VECNUM_ETH1_OFFS 2
-#define VECNUM_EIRQ6 29
-#endif /* defined(CONFIG_405EP) */
-
-#if defined(CONFIG_405EZ)
-#define VECNUM_USBDEV 15
-#define VECNUM_ETH0 16
-#define VECNUM_MAL_SERR 18
-#define VECNUM_MAL_TXDE 18
-#define VECNUM_MAL_RXDE 18
-#define VECNUM_MAL_TXEOB 19
-#define VECNUM_MAL_RXEOB 21
-#endif /* CONFIG_405EX */
-
-#if defined(CONFIG_405EX)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC2NCI 28
-#define VECNUM_UIC2CI 29
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-#endif /* CONFIG_405EX */
-
-#if defined(CONFIG_440GP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-#define VECNUM_USBDEV (32 + 23)
-#define VECNUM_ETH0 (32 + 28)
-#define VECNUM_ETH1_OFFS 2
-#endif /* CONFIG_440GP */
-
-#if defined(CONFIG_440GX)
-/* UICB 0 (440GX only) */
-/*
- * All those defines below are off-by-one, so that the common UIC code
- * can be used. So VECNUM_UIC1CI refers to VECNUM_UIC0CI etc.
- */
-#define VECNUM_UIC1CI 0
-#define VECNUM_UIC1NCI 1
-#define VECNUM_UIC2CI 2
-#define VECNUM_UIC2NCI 3
-#define VECNUM_UIC3CI 4
-#define VECNUM_UIC3NCI 5
-
-/* UIC 0, used as UIC1 on 440GX because of UICB0 */
-#define VECNUM_MAL_TXEOB (32 + 10)
-#define VECNUM_MAL_RXEOB (32 + 11)
-
-/* UIC 1, used as UIC2 on 440GX because of UICB0 */
-#define VECNUM_MAL_SERR (64 + 0)
-#define VECNUM_MAL_TXDE (64 + 1)
-#define VECNUM_MAL_RXDE (64 + 2)
-#define VECNUM_ETH0 (64 + 28)
-#define VECNUM_ETH1_OFFS 2
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_USBDEV 20
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC2NCI 28
-#define VECNUM_UIC2CI 29
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-
-/* UIC 2 */
-#define VECNUM_EIRQ2 (64 + 3)
-#endif /* CONFIG_440EPX */
-
-#if defined(CONFIG_440SP)
-/* UIC 0 */
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#define VECNUM_ETH0 (32 + 28)
-#endif /* CONFIG_440SP */
-
-#if defined(CONFIG_440SPE)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#define VECNUM_ETH0 (32 + 28)
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 2 */
-#define VECNUM_MAL_SERR (64 + 3)
-#define VECNUM_MAL_TXDE (64 + 4)
-#define VECNUM_MAL_RXDE (64 + 5)
-#define VECNUM_MAL_TXEOB (64 + 6)
-#define VECNUM_MAL_RXEOB (64 + 7)
-#define VECNUM_ETH0 (64 + 16)
-#define VECNUM_ETH1_OFFS 1
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_460SX)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_ETH0 19
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#endif /* CONFIG_460EX */
-
-#if !defined(VECNUM_ETH1_OFFS)
-#define VECNUM_ETH1_OFFS 1
-#endif
-
-/*
- * Mask definitions (used for example in 4xx_enet.c)
- */
-#define UIC_MASK(vec) (0x80000000 >> ((vec) & 0x1f))
-/* UIC_NR won't work for 440GX because of its specific UIC DCR addresses */
-#define UIC_NR(vec) ((vec) >> 5)
-
-#endif /* _PPC4xx_UIC_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef __PPC4xx_CONFIG_H
-#define __PPC4xx_CONFIG_H
-
-#include <common.h>
-
-struct ppc4xx_config {
- char label[16];
- char description[64];
- u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE];
-};
-
-extern struct ppc4xx_config ppc4xx_config_val[];
-extern int ppc4xx_config_count;
-
-#endif /* __PPC4xx_CONFIG_H */
+++ /dev/null
-#ifndef __ASM_PPC_PROCESSOR_H
-#define __ASM_PPC_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/config.h>
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-/* Machine State Register (MSR) Fields */
-
-#ifdef CONFIG_PPC64BRIDGE
-#define MSR_SF (1<<63)
-#define MSR_ISF (1<<61)
-#endif /* CONFIG_PPC64BRIDGE */
-#define MSR_UCLE (1<<26) /* User-mode cache lock enable (e500) */
-#define MSR_VEC (1<<25) /* Enable AltiVec(74xx) */
-#define MSR_SPE (1<<25) /* Enable SPE(e500) */
-#define MSR_POW (1<<18) /* Enable Power Management */
-#define MSR_WE (1<<18) /* Wait State Enable */
-#define MSR_TGPR (1<<17) /* TLB Update registers in use */
-#define MSR_CE (1<<17) /* Critical Interrupt Enable */
-#define MSR_ILE (1<<16) /* Interrupt Little Endian */
-#define MSR_EE (1<<15) /* External Interrupt Enable */
-#define MSR_PR (1<<14) /* Problem State / Privilege Level */
-#define MSR_FP (1<<13) /* Floating Point enable */
-#define MSR_ME (1<<12) /* Machine Check Enable */
-#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
-#define MSR_SE (1<<10) /* Single Step */
-#define MSR_DWE (1<<10) /* Debug Wait Enable (4xx) */
-#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
-#define MSR_BE (1<<9) /* Branch Trace */
-#define MSR_DE (1<<9) /* Debug Exception Enable */
-#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
-#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
-#define MSR_IR (1<<5) /* Instruction Relocate */
-#define MSR_IS (1<<5) /* Book E Instruction space */
-#define MSR_DR (1<<4) /* Data Relocate */
-#define MSR_DS (1<<4) /* Book E Data space */
-#define MSR_PE (1<<3) /* Protection Enable */
-#define MSR_PX (1<<2) /* Protection Exclusive Mode */
-#define MSR_PMM (1<<2) /* Performance monitor mark bit (e500) */
-#define MSR_RI (1<<1) /* Recoverable Exception */
-#define MSR_LE (1<<0) /* Little Endian */
-
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define MSR_ MSR_ME|MSR_IP|MSR_RI
-#else
-#define MSR_ MSR_ME|MSR_RI
-#endif
-#ifndef CONFIG_E500
-#define MSR_KERNEL MSR_|MSR_IR|MSR_DR
-#else
-#define MSR_KERNEL MSR_ME
-#endif
-
-/* Floating Point Status and Control Register (FPSCR) Fields */
-
-#define FPSCR_FX 0x80000000 /* FPU exception summary */
-#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
-#define FPSCR_VX 0x20000000 /* Invalid operation summary */
-#define FPSCR_OX 0x10000000 /* Overflow exception summary */
-#define FPSCR_UX 0x08000000 /* Underflow exception summary */
-#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */
-#define FPSCR_XX 0x02000000 /* Inexact exception summary */
-#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
-#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
-#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
-#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
-#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
-#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
-#define FPSCR_FR 0x00040000 /* Fraction rounded */
-#define FPSCR_FI 0x00020000 /* Fraction inexact */
-#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
-#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
-#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
-#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
-#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
-#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
-#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
-#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
-#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
-#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
-#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
-#define FPSCR_RN 0x00000003 /* FPU rounding control */
-
-/* Special Purpose Registers (SPRNs)*/
-
-/* PPC440 Architecture is BOOK-E */
-#ifdef CONFIG_440
-#define CONFIG_BOOKE
-#endif
-
-#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
-#ifdef CONFIG_BOOKE
-#define SPRN_CCR1 0x378 /* Core Configuration Register for 440 only */
-#endif
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
-#define SPRN_CTR 0x009 /* Count Register */
-#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
-#ifndef CONFIG_BOOKE
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
-#else
-#define SPRN_DAC1 0x13C /* Book E Data Address Compare 1 */
-#define SPRN_DAC2 0x13D /* Book E Data Address Compare 2 */
-#endif /* CONFIG_BOOKE */
-#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
-#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
-#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
-#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
-#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
-#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
-#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
-#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
-#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
-#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
-#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
-#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
-#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
-#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
-#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
-#define SPRN_DBAT7U 0x23E /* Data BAT 7 Lower Register */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define DBCR_EDM 0x80000000
-#define DBCR_IDM 0x40000000
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
-#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
-#define DBCR_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#ifndef CONFIG_BOOKE
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#else
-#define SPRN_DBCR0 0x134 /* Book E Debug Control Register 0 */
-#endif /* CONFIG_BOOKE */
-#ifndef CONFIG_BOOKE
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#else
-#define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */
-#ifdef CONFIG_BOOKE
-#define SPRN_DBDR 0x3f3 /* Debug Data Register */
-#endif
-#define SPRN_DBSR 0x130 /* Book E Debug Status Register */
-#define DBSR_IC 0x08000000 /* Book E Instruction Completion */
-#define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */
-#endif /* CONFIG_BOOKE */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-#ifndef CONFIG_BOOKE
-#define SPRN_DCDBTRL 0x39c /* Data Cache Debug Tag Register Low */
-#define SPRN_DCDBTRH 0x39d /* Data Cache Debug Tag Register High */
-#endif
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-#ifndef CONFIG_BOOKE
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
-#else
-#define SPRN_DEAR 0x03D /* Book E Data Error Address Register */
-#endif /* CONFIG_BOOKE */
-#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
-#ifdef CONFIG_BOOKE
-#define SPRN_DNV0 0x390 /* Data Cache Normal Victim 0 */
-#define SPRN_DNV1 0x391 /* Data Cache Normal Victim 1 */
-#define SPRN_DNV2 0x392 /* Data Cache Normal Victim 2 */
-#define SPRN_DNV3 0x393 /* Data Cache Normal Victim 3 */
-#endif
-#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
-#ifdef CONFIG_BOOKE
-#define SPRN_DTV0 0x394 /* Data Cache Transient Victim 0 */
-#define SPRN_DTV1 0x395 /* Data Cache Transient Victim 1 */
-#define SPRN_DTV2 0x396 /* Data Cache Transient Victim 2 */
-#define SPRN_DTV3 0x397 /* Data Cache Transient Victim 3 */
-#define SPRN_DVLIM 0x398 /* Data Cache Victim Limit */
-#endif
-#define SPRN_EAR 0x11A /* External Address Register */
-#ifndef CONFIG_BOOKE
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#else
-#define SPRN_ESR 0x03E /* Book E Exception Syndrome Register */
-#endif /* CONFIG_BOOKE */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
-#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-
-#define HID0_ICE_SHIFT 15
-#define HID0_DCE_SHIFT 14
-#define HID0_DLOCK_SHIFT 12
-
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
-#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
-#define HID0_TBEN (1<<14) /* Time Base Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
-#define HID0_DCI HID0_DCFI
-#define HID0_SPD (1<<9) /* Speculative disable */
-#define HID0_ENMAS7 (1<<7) /* Enable MAS7 Update for 36-bit phys */
-#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
-#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
-#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
-#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
-#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
-#define HID1_RFXE (1<<17) /* Read Fault Exception Enable */
-#define HID1_ASTME (1<<13) /* Address bus streaming mode */
-#define HID1_ABE (1<<12) /* Address broadcast enable */
-#define HID1_MBDD (1<<6) /* optimized sync instruction */
-#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
-#ifndef CONFIG_BOOKE
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
-#else
-#define SPRN_IAC1 0x138 /* Book E Instruction Address Compare 1 */
-#define SPRN_IAC2 0x139 /* Book E Instruction Address Compare 2 */
-#endif /* CONFIG_BOOKE */
-#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
-#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
-#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
-#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
-#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
-#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
-#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
-#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
-#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
-#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
-#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
-#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
-#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
-#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
-#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
-#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#ifdef CONFIG_BOOKE
-#define SPRN_ICDBTRL 0x39e /* instruction cache debug tag register low */
-#define SPRN_ICDBTRH 0x39f /* instruction cache debug tag register high */
-#endif
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
-#ifdef CONFIG_BOOKE
-#define SPRN_INV0 0x370 /* Instruction Cache Normal Victim 0 */
-#define SPRN_INV1 0x371 /* Instruction Cache Normal Victim 1 */
-#define SPRN_INV2 0x372 /* Instruction Cache Normal Victim 2 */
-#define SPRN_INV3 0x373 /* Instruction Cache Normal Victim 3 */
-#define SPRN_ITV0 0x374 /* Instruction Cache Transient Victim 0 */
-#define SPRN_ITV1 0x375 /* Instruction Cache Transient Victim 1 */
-#define SPRN_ITV2 0x376 /* Instruction Cache Transient Victim 2 */
-#define SPRN_ITV3 0x377 /* Instruction Cache Transient Victim 3 */
-#define SPRN_IVLIM 0x399 /* Instruction Cache Victim Limit */
-#endif
-#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */
-#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
-#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_MBAR 0x137 /* System memory base address */
-#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
-#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
-#ifdef CONFIG_BOOKE
-#define SPRN_MMUCR 0x3b2 /* MMU Control Register */
-#endif
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-#ifndef CONFIG_BOOKE
-#define SPRN_PID 0x3B1 /* Process ID */
-#define SPRN_PIR 0x3FF /* Processor Identification Register */
-#else
-#define SPRN_PID 0x030 /* Book E Process ID */
-#define SPRN_PIR 0x11E /* Book E Processor Identification Register */
-#endif /* CONFIG_BOOKE */
-#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
-#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
-#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
-#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
-#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
-#define SPRN_PVR 0x11F /* Processor Version Register */
-#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
-#ifdef CONFIG_BOOKE
-#define SPRN_RSTCFG 0x39b /* Reset Configuration */
-#endif
-#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
-#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SGR_NORMAL 0
-#define SGR_GUARDED 1
-#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
-#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
-#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
-#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
-#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
-#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
-#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
-#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
-#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
-#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
-#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
-#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
-
-#ifdef CONFIG_BOOKE
-#define SPRN_SVR 0x3FF /* System Version Register */
-#else
-#define SPRN_SVR 0x11E /* System Version Register */
-#endif
-#define SPRN_TBHI 0x3DC /* Time Base High */
-#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
-#define SPRN_TBLO 0x3DD /* Time Base Low */
-#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
-#define SPRN_TBRL 0x10C /* Time Base Read Lower Register */
-#define SPRN_TBRU 0x10D /* Time Base Read Upper Register */
-#define SPRN_TBWL 0x11C /* Time Base Write Lower Register */
-#define SPRN_TBWU 0x11D /* Time Base Write Upper Register */
-#ifndef CONFIG_BOOKE
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#else
-#define SPRN_TCR 0x154 /* Book E Timer Control Register */
-#endif /* CONFIG_BOOKE */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-#define THRM1_TIN (1<<0)
-#define THRM1_TIV (1<<1)
-#define THRM1_THRES (0x7f<<2)
-#define THRM1_TID (1<<29)
-#define THRM1_TIE (1<<30)
-#define THRM1_V (1<<31)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<31)
-#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
-#ifndef CONFIG_BOOKE
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#else
-#define SPRN_TSR 0x150 /* Book E Timer Status Register */
-#endif /* CONFIG_BOOKE */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
-#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
-#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
-#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
-#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
-#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
-#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
-#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
-#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
-
-/* Book E definitions */
-#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
-#define SPRN_CSRR0 0x03A /* Critical SRR0 */
-#define SPRN_CSRR1 0x03B /* Critical SRR0 */
-#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
-#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
-#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
-#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
-#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
-#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
-#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
-#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
-#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
-#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
-#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
-#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
-#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
-#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
-#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
-#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
-#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
-#define SPRN_IVOR10 0x19a /* Interrupt Vector Offset Register 10 */
-#define SPRN_IVOR11 0x19b /* Interrupt Vector Offset Register 11 */
-#define SPRN_IVOR12 0x19c /* Interrupt Vector Offset Register 12 */
-#define SPRN_IVOR13 0x19d /* Interrupt Vector Offset Register 13 */
-#define SPRN_IVOR14 0x19e /* Interrupt Vector Offset Register 14 */
-#define SPRN_IVOR15 0x19f /* Interrupt Vector Offset Register 15 */
-#define SPRN_IVOR38 0x1b0 /* Interrupt Vector Offset Register 38 */
-#define SPRN_IVOR39 0x1b1 /* Interrupt Vector Offset Register 39 */
-#define SPRN_IVOR40 0x1b2 /* Interrupt Vector Offset Register 40 */
-#define SPRN_IVOR41 0x1b3 /* Interrupt Vector Offset Register 41 */
-#define SPRN_GIVOR2 0x1b8 /* Guest Interrupt Vector Offset Register 2 */
-#define SPRN_GIVOR3 0x1b9 /* Guest Interrupt Vector Offset Register 3 */
-#define SPRN_GIVOR4 0x1ba /* Guest Interrupt Vector Offset Register 4 */
-#define SPRN_GIVOR8 0x1bb /* Guest Interrupt Vector Offset Register 8 */
-#define SPRN_GIVOR13 0x1bc /* Guest Interrupt Vector Offset Register 13 */
-#define SPRN_GIVOR14 0x1bd /* Guest Interrupt Vector Offset Register 14 */
-
-/* e500 definitions */
-#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
-#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
-#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */
-#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
-#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
-#define L1CSR0_DCLFR 0x00000100 /* D-Cache Lock Flash Reset */
-#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
-#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
-#define SPRN_L1CSR1 0x3f3 /* L1 Instruction Cache Control and Status Register 1 */
-#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
-#define L1CSR1_ICLFR 0x00000100 /* I-Cache Lock Flash Reset */
-#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
-#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
-#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
-#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
-#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
-#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
-#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
-#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
-#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
-#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
-#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
-#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
-#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
-#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
-#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
-#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
-#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */
-
-#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
-#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
-#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
-#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
-#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
-#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
-#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
-#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
-#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
-#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
-#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
-#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */
-
-#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
-#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
-#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
-#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
-#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
-#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
-#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
-
-#define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */
-#define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */
-#define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */
-#define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */
-#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */
-#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN)
-#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
-#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
-#define SPRN_PID1 0x279 /* Process ID Register 1 */
-#define SPRN_PID2 0x27a /* Process ID Register 2 */
-#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
-#define SPRN_MCAR 0x23d /* Machine Check Address register */
-#define MCSR_MCS 0x80000000 /* Machine Check Summary */
-#define MCSR_IB 0x40000000 /* Instruction PLB Error */
-#if defined(CONFIG_440)
-#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
-#else
-#define MCSR_DB 0x20000000 /* Data PLB Error */
-#endif /* defined(CONFIG_440) */
-#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
-#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
-#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
-#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
-#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
-#define ESR_ST 0x00800000 /* Store Operation */
-
-#if defined(CONFIG_MPC86xx)
-#define SPRN_MSSCR0 0x3f6
-#define SPRN_MSSSR0 0x3f7
-#endif
-
-/* Short-hand versions for a number of the above SPRNs */
-
-#define CTR SPRN_CTR /* Counter Register */
-#define DAR SPRN_DAR /* Data Address Register */
-#define DABR SPRN_DABR /* Data Address Breakpoint Register */
-#define DAC1 SPRN_DAC1 /* Data Address Register 1 */
-#define DAC2 SPRN_DAC2 /* Data Address Register 2 */
-#define DBAT0L SPRN_DBAT0L /* Data BAT 0 Lower Register */
-#define DBAT0U SPRN_DBAT0U /* Data BAT 0 Upper Register */
-#define DBAT1L SPRN_DBAT1L /* Data BAT 1 Lower Register */
-#define DBAT1U SPRN_DBAT1U /* Data BAT 1 Upper Register */
-#define DBAT2L SPRN_DBAT2L /* Data BAT 2 Lower Register */
-#define DBAT2U SPRN_DBAT2U /* Data BAT 2 Upper Register */
-#define DBAT3L SPRN_DBAT3L /* Data BAT 3 Lower Register */
-#define DBAT3U SPRN_DBAT3U /* Data BAT 3 Upper Register */
-#define DBAT4L SPRN_DBAT4L /* Data BAT 4 Lower Register */
-#define DBAT4U SPRN_DBAT4U /* Data BAT 4 Upper Register */
-#define DBAT5L SPRN_DBAT5L /* Data BAT 5 Lower Register */
-#define DBAT5U SPRN_DBAT5U /* Data BAT 5 Upper Register */
-#define DBAT6L SPRN_DBAT6L /* Data BAT 6 Lower Register */
-#define DBAT6U SPRN_DBAT6U /* Data BAT 6 Upper Register */
-#define DBAT7L SPRN_DBAT7L /* Data BAT 7 Lower Register */
-#define DBAT7U SPRN_DBAT7U /* Data BAT 7 Upper Register */
-#define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */
-#define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */
-#define DBSR SPRN_DBSR /* Debug Status Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
-#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
-#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
-#define ESR SPRN_ESR /* Exception Syndrome Register */
-#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
-#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
-#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
-#define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */
-#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
-#define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */
-#define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */
-#define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */
-#define IBAT0U SPRN_IBAT0U /* Instruction BAT 0 Upper Register */
-#define IBAT1L SPRN_IBAT1L /* Instruction BAT 1 Lower Register */
-#define IBAT1U SPRN_IBAT1U /* Instruction BAT 1 Upper Register */
-#define IBAT2L SPRN_IBAT2L /* Instruction BAT 2 Lower Register */
-#define IBAT2U SPRN_IBAT2U /* Instruction BAT 2 Upper Register */
-#define IBAT3L SPRN_IBAT3L /* Instruction BAT 3 Lower Register */
-#define IBAT3U SPRN_IBAT3U /* Instruction BAT 3 Upper Register */
-#define IBAT4L SPRN_IBAT4L /* Instruction BAT 4 Lower Register */
-#define IBAT4U SPRN_IBAT4U /* Instruction BAT 4 Upper Register */
-#define IBAT5L SPRN_IBAT5L /* Instruction BAT 5 Lower Register */
-#define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */
-#define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */
-#define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */
-#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
-#define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */
-#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
-#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
-#define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */
-#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
-#define LR SPRN_LR
-#define MBAR SPRN_MBAR /* System memory base address */
-#if defined(CONFIG_MPC86xx)
-#define MSSCR0 SPRN_MSSCR0
-#endif
-#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-#define PIR SPRN_PIR
-#endif
-#define SVR SPRN_SVR /* System-On-Chip Version Register */
-#define PVR SPRN_PVR /* Processor Version */
-#define RPA SPRN_RPA /* Required Physical Address Register */
-#define SDR1 SPRN_SDR1 /* MMU hash base register */
-#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
-#define SPR1 SPRN_SPRG1
-#define SPR2 SPRN_SPRG2
-#define SPR3 SPRN_SPRG3
-#define SPRG0 SPRN_SPRG0
-#define SPRG1 SPRN_SPRG1
-#define SPRG2 SPRN_SPRG2
-#define SPRG3 SPRN_SPRG3
-#define SPRG4 SPRN_SPRG4
-#define SPRG5 SPRN_SPRG5
-#define SPRG6 SPRN_SPRG6
-#define SPRG7 SPRN_SPRG7
-#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
-#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
-#define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */
-#define SRR3 SPRN_SRR3 /* Save and Restore Register 3 */
-#define SVR SPRN_SVR /* System Version Register */
-#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
-#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
-#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
-#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
-#define TCR SPRN_TCR /* Timer Control Register */
-#define TSR SPRN_TSR /* Timer Status Register */
-#define ICTC 1019
-#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
-#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
-#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
-#define XER SPRN_XER
-
-#define DECAR SPRN_DECAR
-#define CSRR0 SPRN_CSRR0
-#define CSRR1 SPRN_CSRR1
-#define IVPR SPRN_IVPR
-#define USPRG0 SPRN_USPRG
-#define SPRG4R SPRN_SPRG4R
-#define SPRG5R SPRN_SPRG5R
-#define SPRG6R SPRN_SPRG6R
-#define SPRG7R SPRN_SPRG7R
-#define SPRG4W SPRN_SPRG4W
-#define SPRG5W SPRN_SPRG5W
-#define SPRG6W SPRN_SPRG6W
-#define SPRG7W SPRN_SPRG7W
-#define DEAR SPRN_DEAR
-#define DBCR2 SPRN_DBCR2
-#define IAC3 SPRN_IAC3
-#define IAC4 SPRN_IAC4
-#define DVC1 SPRN_DVC1
-#define DVC2 SPRN_DVC2
-#define IVOR0 SPRN_IVOR0
-#define IVOR1 SPRN_IVOR1
-#define IVOR2 SPRN_IVOR2
-#define IVOR3 SPRN_IVOR3
-#define IVOR4 SPRN_IVOR4
-#define IVOR5 SPRN_IVOR5
-#define IVOR6 SPRN_IVOR6
-#define IVOR7 SPRN_IVOR7
-#define IVOR8 SPRN_IVOR8
-#define IVOR9 SPRN_IVOR9
-#define IVOR10 SPRN_IVOR10
-#define IVOR11 SPRN_IVOR11
-#define IVOR12 SPRN_IVOR12
-#define IVOR13 SPRN_IVOR13
-#define IVOR14 SPRN_IVOR14
-#define IVOR15 SPRN_IVOR15
-#define IVOR32 SPRN_IVOR32
-#define IVOR33 SPRN_IVOR33
-#define IVOR34 SPRN_IVOR34
-#define IVOR35 SPRN_IVOR35
-#define MCSRR0 SPRN_MCSRR0
-#define MCSRR1 SPRN_MCSRR1
-#define L1CSR0 SPRN_L1CSR0
-#define L1CSR1 SPRN_L1CSR1
-#define L1CSR2 SPRN_L1CSR2
-#define L1CFG0 SPRN_L1CFG0
-#define L1CFG1 SPRN_L1CFG1
-#define L2CFG0 SPRN_L2CFG0
-#define L2CSR0 SPRN_L2CSR0
-#define L2CSR1 SPRN_L2CSR1
-#define MCSR SPRN_MCSR
-#define MMUCSR0 SPRN_MMUCSR0
-#define BUCSR SPRN_BUCSR
-#define PID0 SPRN_PID
-#define PID1 SPRN_PID1
-#define PID2 SPRN_PID2
-#define MAS0 SPRN_MAS0
-#define MAS1 SPRN_MAS1
-#define MAS2 SPRN_MAS2
-#define MAS3 SPRN_MAS3
-#define MAS4 SPRN_MAS4
-#define MAS5 SPRN_MAS5
-#define MAS6 SPRN_MAS6
-#define MAS7 SPRN_MAS7
-#define MAS8 SPRN_MAS8
-
-#if defined(CONFIG_4xx) || defined(CONFIG_44x) || defined(CONFIG_MPC85xx)
-#define DAR_DEAR DEAR
-#else
-#define DAR_DEAR DAR
-#endif
-
-/* Device Control Registers */
-
-#define DCRN_BEAR 0x090 /* Bus Error Address Register */
-#define DCRN_BESR 0x091 /* Bus Error Syndrome Register */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-#define DCRN_DMACC0 0x0C4 /* DMA Chained Count Register 0 */
-#define DCRN_DMACC1 0x0CC /* DMA Chained Count Register 1 */
-#define DCRN_DMACC2 0x0D4 /* DMA Chained Count Register 2 */
-#define DCRN_DMACC3 0x0DC /* DMA Chained Count Register 3 */
-#define DCRN_DMACR0 0x0C0 /* DMA Channel Control Register 0 */
-#define DCRN_DMACR1 0x0C8 /* DMA Channel Control Register 1 */
-#define DCRN_DMACR2 0x0D0 /* DMA Channel Control Register 2 */
-#define DCRN_DMACR3 0x0D8 /* DMA Channel Control Register 3 */
-#define DCRN_DMACT0 0x0C1 /* DMA Count Register 0 */
-#define DCRN_DMACT1 0x0C9 /* DMA Count Register 1 */
-#define DCRN_DMACT2 0x0D1 /* DMA Count Register 2 */
-#define DCRN_DMACT3 0x0D9 /* DMA Count Register 3 */
-#define DCRN_DMADA0 0x0C2 /* DMA Destination Address Register 0 */
-#define DCRN_DMADA1 0x0CA /* DMA Destination Address Register 1 */
-#define DCRN_DMADA2 0x0D2 /* DMA Destination Address Register 2 */
-#define DCRN_DMADA3 0x0DA /* DMA Destination Address Register 3 */
-#define DCRN_DMASA0 0x0C3 /* DMA Source Address Register 0 */
-#define DCRN_DMASA1 0x0CB /* DMA Source Address Register 1 */
-#define DCRN_DMASA2 0x0D3 /* DMA Source Address Register 2 */
-#define DCRN_DMASA3 0x0DB /* DMA Source Address Register 3 */
-#define DCRN_DMASR 0x0E0 /* DMA Status Register */
-#define DCRN_EXIER 0x042 /* External Interrupt Enable Register */
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-#define DCRN_EXISR 0x040 /* External Interrupt Status Register */
-#define DCRN_IOCR 0x0A0 /* Input/Output Configuration Register */
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
-
-/* System-On-Chip Version Register */
-
-/* System-On-Chip Version Register (SVR) field extraction */
-
-#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
-#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */
-
-#define SVR_CID(svr) (((svr) >> 28) & 0x0F) /* Company or manufacturer ID */
-#define SVR_SOCOP(svr) (((svr) >> 22) & 0x3F) /* SOC integration options */
-#define SVR_SID(svr) (((svr) >> 16) & 0x3F) /* SOC ID */
-#define SVR_PROC(svr) (((svr) >> 12) & 0x0F) /* Process revision field */
-#define SVR_MFG(svr) (((svr) >> 8) & 0x0F) /* Manufacturing revision */
-#define SVR_MJREV(svr) (((svr) >> 4) & 0x0F) /* Major SOC design revision indicator */
-#define SVR_MNREV(svr) (((svr) >> 0) & 0x0F) /* Minor SOC design revision indicator */
-
-/* Processor Version Register */
-
-/* Processor Version Register (PVR) field extraction */
-
-#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
-#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
-
-/*
- * AMCC has further subdivided the standard PowerPC 16-bit version and
- * revision subfields of the PVR for the PowerPC 403s into the following:
- */
-
-#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
-#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
-#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
-#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
-#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
-#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
-
-/* e600 core PVR fields */
-
-#define PVR_E600_VER(pvr) (((pvr) >> 15) & 0xFFFF) /* Version/type */
-#define PVR_E600_TECH(pvr) (((pvr) >> 12) & 0xF) /* Technology */
-#define PVR_E600_MAJ(pvr) (((pvr) >> 8) & 0xF) /* Major revision */
-#define PVR_E600_MIN(pvr) (((pvr) >> 0) & 0xFF) /* Minor revision */
-
-/* Processor Version Numbers */
-
-#define PVR_403GA 0x00200000
-#define PVR_403GB 0x00200100
-#define PVR_403GC 0x00200200
-#define PVR_403GCX 0x00201400
-#define PVR_405GP 0x40110000
-#define PVR_405GP_RB 0x40110040
-#define PVR_405GP_RC 0x40110082
-#define PVR_405GP_RD 0x401100C4
-#define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */
-#define PVR_405CR_RA 0x40110041
-#define PVR_405CR_RB 0x401100C5
-#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */
-#define PVR_405EP_RA 0x51210950
-#define PVR_405GPR_RB 0x50910951
-#define PVR_405EZ_RA 0x41511460
-#define PVR_405EXR2_RA 0x12911471 /* 405EXr rev A/B without Security */
-#define PVR_405EX1_RA 0x12911477 /* 405EX rev A/B with Security */
-#define PVR_405EXR1_RC 0x1291147B /* 405EXr rev C with Security */
-#define PVR_405EXR2_RC 0x12911479 /* 405EXr rev C without Security */
-#define PVR_405EX1_RC 0x1291147F /* 405EX rev C with Security */
-#define PVR_405EX2_RC 0x1291147D /* 405EX rev C without Security */
-#define PVR_405EXR1_RD 0x12911472 /* 405EXr rev D with Security */
-#define PVR_405EXR2_RD 0x12911470 /* 405EXr rev D without Security */
-#define PVR_405EX1_RD 0x12911475 /* 405EX rev D with Security */
-#define PVR_405EX2_RD 0x12911473 /* 405EX rev D without Security */
-#define PVR_440GP_RB 0x40120440
-#define PVR_440GP_RC 0x40120481
-#define PVR_440EP_RA 0x42221850
-#define PVR_440EP_RB 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
-#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
-#define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
-#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
-#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
-#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
-#define PVR_440GRX1_RA 0x216218D0 /* 440GRX rev A with Security / Kasumi */
-#define PVR_440GRX2_RA 0x216218D4 /* 440GRX rev A without Security / Kasumi */
-#define PVR_440GX_RA 0x51B21850
-#define PVR_440GX_RB 0x51B21851
-#define PVR_440GX_RC 0x51B21892
-#define PVR_440GX_RF 0x51B21894
-#define PVR_405EP_RB 0x51210950
-#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */
-#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */
-#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */
-#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */
-#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */
-#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */
-#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */
-#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */
-#define PVR_460EX_SE_RA 0x130218A2 /* 460EX rev A with Security Engine */
-#define PVR_460EX_RA 0x130218A3 /* 460EX rev A without Security Engine */
-#define PVR_460EX_RB 0x130218A4 /* 460EX rev B with and without Sec Eng*/
-#define PVR_460GT_SE_RA 0x130218A0 /* 460GT rev A with Security Engine */
-#define PVR_460GT_RA 0x130218A1 /* 460GT rev A without Security Engine */
-#define PVR_460GT_RB 0x130218A5 /* 460GT rev B with and without Sec Eng*/
-#define PVR_460SX_RA 0x13541800 /* 460SX rev A */
-#define PVR_460SX_RA_V1 0x13541801 /* 460SX rev A Variant 1 Security disabled */
-#define PVR_460GX_RA 0x13541802 /* 460GX rev A */
-#define PVR_460GX_RA_V1 0x13541803 /* 460GX rev A Variant 1 Security disabled */
-#define PVR_601 0x00010000
-#define PVR_602 0x00050000
-#define PVR_603 0x00030000
-#define PVR_603e 0x00060000
-#define PVR_603ev 0x00070000
-#define PVR_603r 0x00071000
-#define PVR_604 0x00040000
-#define PVR_604e 0x00090000
-#define PVR_604r 0x000A0000
-#define PVR_620 0x00140000
-#define PVR_740 0x00080000
-#define PVR_750 PVR_740
-#define PVR_740P 0x10080000
-#define PVR_750P PVR_740P
-#define PVR_7400 0x000C0000
-#define PVR_7410 0x800C0000
-#define PVR_7450 0x80000000
-
-#define PVR_85xx 0x80200000
-#define PVR_85xx_REV1 (PVR_85xx | 0x0010)
-#define PVR_85xx_REV2 (PVR_85xx | 0x0020)
-
-#define PVR_86xx 0x80040000
-
-#define PVR_VIRTEX5 0x7ff21912
-
-/*
- * For the 8xx processors, all of them report the same PVR family for
- * the PowerPC core. The various versions of these processors must be
- * differentiated by the version number in the Communication Processor
- * Module (CPM).
- */
-#define PVR_821 0x00500000
-#define PVR_823 PVR_821
-#define PVR_850 PVR_821
-#define PVR_860 PVR_821
-#define PVR_7400 0x000C0000
-#define PVR_8240 0x00810100
-
-/*
- * PowerQUICC II family processors report different PVR values depending
- * on silicon process (HiP3, HiP4, HiP7, etc.)
- */
-#define PVR_8260 PVR_8240
-#define PVR_8260_HIP3 0x00810101
-#define PVR_8260_HIP4 0x80811014
-#define PVR_8260_HIP7 0x80822011
-#define PVR_8260_HIP7R1 0x80822013
-#define PVR_8260_HIP7RA 0x80822014
-
-/*
- * MPC 52xx
- */
-#define PVR_5200 0x80822011
-#define PVR_5200B 0x80822014
-
-/*
- * System Version Register
- */
-
-/* System Version Register (SVR) field extraction */
-
-#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
-#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */
-
-#define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */
-
-#define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */
-#define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */
-
-#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
-#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/
-
-/* Some parts define SVR[0:23] as the SOC version */
-#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */
-
-/* whether MPC8xxxE (i.e. has SEC) */
-#if defined(CONFIG_MPC85xx)
-#define IS_E_PROCESSOR(svr) (svr & 0x80000)
-#else
-#if defined(CONFIG_MPC83xx)
-#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
-#endif
-#endif
-
-#define IS_SVR_REV(svr, maj, min) \
- ((SVR_MAJ(svr) == maj) && (SVR_MIN(svr) == min))
-
-/*
- * SVR_SOC_VER() Version Values
- */
-
-#define SVR_8533 0x803400
-#define SVR_8533_E 0x803C00
-#define SVR_8535 0x803701
-#define SVR_8535_E 0x803F01
-#define SVR_8536 0x803700
-#define SVR_8536_E 0x803F00
-#define SVR_8540 0x803000
-#define SVR_8541 0x807200
-#define SVR_8541_E 0x807A00
-#define SVR_8543 0x803200
-#define SVR_8543_E 0x803A00
-#define SVR_8544 0x803401
-#define SVR_8544_E 0x803C01
-#define SVR_8545 0x803102
-#define SVR_8545_E 0x803902
-#define SVR_8547_E 0x803901
-#define SVR_8548 0x803100
-#define SVR_8548_E 0x803900
-#define SVR_8555 0x807100
-#define SVR_8555_E 0x807900
-#define SVR_8560 0x807000
-#define SVR_8567 0x807600
-#define SVR_8567_E 0x807E00
-#define SVR_8568 0x807500
-#define SVR_8568_E 0x807D00
-#define SVR_8569 0x808000
-#define SVR_8569_E 0x808800
-#define SVR_8572 0x80E000
-#define SVR_8572_E 0x80E800
-#define SVR_P1011 0x80E500
-#define SVR_P1011_E 0x80ED00
-#define SVR_P1012 0x80E501
-#define SVR_P1012_E 0x80ED01
-#define SVR_P1013 0x80E700
-#define SVR_P1013_E 0x80EF00
-#define SVR_P1020 0x80E400
-#define SVR_P1020_E 0x80EC00
-#define SVR_P1021 0x80E401
-#define SVR_P1021_E 0x80EC01
-#define SVR_P1022 0x80E600
-#define SVR_P1022_E 0x80EE00
-#define SVR_P2010 0x80E300
-#define SVR_P2010_E 0x80EB00
-#define SVR_P2020 0x80E200
-#define SVR_P2020_E 0x80EA00
-#define SVR_P4040 0x820100
-#define SVR_P4040_E 0x820900
-#define SVR_P4080 0x820000
-#define SVR_P4080_E 0x820800
-
-#define SVR_8610 0x80A000
-#define SVR_8641 0x809000
-#define SVR_8641D 0x809001
-
-#define SVR_Unknown 0xFFFFFF
-
-#define _GLOBAL(n)\
- .globl n;\
-n:
-
-/* Macros for setting and retrieving special purpose registers */
-
-#define stringify(s) tostring(s)
-#define tostring(s) #s
-
-#define mfdcr(rn) ({unsigned int rval; \
- asm volatile("mfdcr %0," stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtdcr(rn, v) asm volatile("mtdcr " stringify(rn) ",%0" : : "r" (v))
-
-#define mfmsr() ({unsigned int rval; \
- asm volatile("mfmsr %0" : "=r" (rval)); rval;})
-#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
-
-#define mfspr(rn) ({unsigned int rval; \
- asm volatile("mfspr %0," stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtspr(rn, v) asm volatile("mtspr " stringify(rn) ",%0" : : "r" (v))
-
-#define tlbie(v) asm volatile("tlbie %0 \n sync" : : "r" (v))
-
-/* Segment Registers */
-
-#define SR0 0
-#define SR1 1
-#define SR2 2
-#define SR3 3
-#define SR4 4
-#define SR5 5
-#define SR6 6
-#define SR7 7
-#define SR8 8
-#define SR9 9
-#define SR10 10
-#define SR11 11
-#define SR12 12
-#define SR13 13
-#define SR14 14
-#define SR15 15
-
-#ifndef __ASSEMBLY__
-
-struct cpu_type {
- char name[15];
- u32 soc_ver;
- u32 num_cores;
-};
-
-struct cpu_type *identify_cpu(u32 ver);
-
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
-#define CPU_TYPE_ENTRY(n, v, nc) \
- { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), }
-#else
-#if defined(CONFIG_MPC83xx)
-#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
-#endif
-#endif
-
-
-#ifndef CONFIG_MACH_SPECIFIC
-extern int _machine;
-extern int have_of;
-#endif /* CONFIG_MACH_SPECIFIC */
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-/*
- * This is used to identify the board type from a given PReP board
- * vendor. Board revision is also made available.
- */
-extern unsigned char ucSystemType;
-extern unsigned char ucBoardRev;
-extern unsigned char ucBoardRevMaj, ucBoardRevMin;
-
-struct task_struct;
-void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
-void release_thread(struct task_struct *);
-
-/*
- * Create a new kernel thread.
- */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/*
- * Bus types
- */
-#define EISA_bus 0
-#define EISA_bus__is_a_macro /* for versions in ksyms.c */
-#define MCA_bus 0
-#define MCA_bus__is_a_macro /* for versions in ksyms.c */
-
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-
-/*
- * this is the minimum allowable io space due to the location
- * of the io areas on prep (first one at 0x80000000) but
- * as soon as I get around to remapping the io areas with the BATs
- * to match the mac we can raise this. -- Cort
- */
-#define TASK_SIZE (0x80000000UL)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-struct thread_struct {
- unsigned long ksp; /* Kernel stack pointer */
- unsigned long wchan; /* Event task is sleeping on */
- struct pt_regs *regs; /* Pointer to saved register state */
- mm_segment_t fs; /* for get_fs() validation */
- void *pgdir; /* root of page-table tree */
- signed long last_syscall;
- double fpr[32]; /* Complete floating point set */
- unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */
- unsigned long fpscr; /* Floating point status */
-#ifdef CONFIG_ALTIVEC
- vector128 vr[32]; /* Complete AltiVec set */
- vector128 vscr; /* AltiVec status */
- unsigned long vrsave;
-#endif /* CONFIG_ALTIVEC */
-};
-
-#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
-
-#define INIT_THREAD { \
- INIT_SP, /* ksp */ \
- 0, /* wchan */ \
- (struct pt_regs *)INIT_SP - 1, /* regs */ \
- KERNEL_DS, /*fs*/ \
- swapper_pg_dir, /* pgdir */ \
- 0, /* last_syscall */ \
- {0}, 0, 0 \
-}
-
-/*
- * Note: the vm_start and vm_end fields here should *not*
- * be in kernel space. (Could vm_end == vm_start perhaps?)
- */
-#define INIT_MMAP { &init_mm, 0, 0x1000, NULL, \
- PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \
- 1, NULL, NULL }
-
-/*
- * Return saved PC of a blocked thread. For now, this is the "user" PC
- */
-static inline unsigned long thread_saved_pc(struct thread_struct *t)
-{
- return (t->regs) ? t->regs->nip : 0;
-}
-
-#define copy_segments(tsk, mm) do { } while (0)
-#define release_segments(mm) do { } while (0)
-#define forget_segments() do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) ((tsk)->thread.regs->nip)
-#define KSTK_ESP(tsk) ((tsk)->thread.regs->gpr[1])
-
-/*
- * NOTE! The task struct and the stack go together
- */
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_task_struct() \
- ((struct task_struct *) __get_free_pages(GFP_KERNEL,1))
-#define free_task_struct(p) free_pages((unsigned long)(p),1)
-#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count)
-
-/* in process.c - for early bootup debug -- Cort */
-int ll_printk(const char *, ...);
-void ll_puts(const char *);
-
-#define init_task (init_task_union.task)
-#define init_stack (init_task_union.stack)
-
-/* In misc.c */
-void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#endif /* ndef ASSEMBLY*/
-
-#ifdef CONFIG_MACH_SPECIFIC
-#if defined(CONFIG_8xx)
-#define _machine _MACH_8xx
-#define have_of 0
-#elif defined(CONFIG_OAK)
-#define _machine _MACH_oak
-#define have_of 0
-#elif defined(CONFIG_WALNUT)
-#define _machine _MACH_walnut
-#define have_of 0
-#elif defined(CONFIG_APUS)
-#define _machine _MACH_apus
-#define have_of 0
-#elif defined(CONFIG_GEMINI)
-#define _machine _MACH_gemini
-#define have_of 0
-#elif defined(CONFIG_8260)
-#define _machine _MACH_8260
-#define have_of 0
-#elif defined(CONFIG_SANDPOINT)
-#define _machine _MACH_sandpoint
-#elif defined(CONFIG_HIDDEN_DRAGON)
-#define _machine _MACH_hidden_dragon
-#define have_of 0
-#else
-#error "Machine not defined correctly"
-#endif
-#endif /* CONFIG_MACH_SPECIFIC */
-
-#endif /* __ASM_PPC_PROCESSOR_H */
+++ /dev/null
-#ifndef _PPC_PTRACE_H
-#define _PPC_PTRACE_H
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- *
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
- *
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
- *
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c.
- */
-
-#include <linux/config.h>
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC64BRIDGE
-#define PPC_REG unsigned long /*long*/
-#else
-#define PPC_REG unsigned long
-#endif
-struct pt_regs {
- PPC_REG gpr[32];
- PPC_REG nip;
- PPC_REG msr;
- PPC_REG orig_gpr3; /* Used for restarting system calls */
- PPC_REG ctr;
- PPC_REG link;
- PPC_REG xer;
- PPC_REG ccr;
- PPC_REG mq; /* 601 only (not used at present) */
- /* Used on APUS to hold IPL value. */
- PPC_REG trap; /* Reason for being here */
- PPC_REG dar; /* Fault registers */
- PPC_REG dsisr;
- PPC_REG result; /* Result of a system call */
-};
-#endif
-
-#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
-
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE 64
-
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
-
-/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
- */
-#define PT_R0 0
-#define PT_R1 1
-#define PT_R2 2
-#define PT_R3 3
-#define PT_R4 4
-#define PT_R5 5
-#define PT_R6 6
-#define PT_R7 7
-#define PT_R8 8
-#define PT_R9 9
-#define PT_R10 10
-#define PT_R11 11
-#define PT_R12 12
-#define PT_R13 13
-#define PT_R14 14
-#define PT_R15 15
-#define PT_R16 16
-#define PT_R17 17
-#define PT_R18 18
-#define PT_R19 19
-#define PT_R20 20
-#define PT_R21 21
-#define PT_R22 22
-#define PT_R23 23
-#define PT_R24 24
-#define PT_R25 25
-#define PT_R26 26
-#define PT_R27 27
-#define PT_R28 28
-#define PT_R29 29
-#define PT_R30 30
-#define PT_R31 31
-
-#define PT_NIP 32
-#define PT_MSR 33
-#ifdef __KERNEL__
-#define PT_ORIG_R3 34
-#endif
-#define PT_CTR 35
-#define PT_LNK 36
-#define PT_XER 37
-#define PT_CCR 38
-#define PT_MQ 39
-
-#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
-
-#endif
+++ /dev/null
-/* 7/18/95 */
-/*----------------------------------------------------------------------------*/
-/* Residual Data header definitions and prototypes */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for RESIDUAL on PowerPC Reference Platform */
-/* residual.h - Residual data structure passed in r3. */
-/* Load point passed in r4 to boot image. */
-/* For enum's: if given in hex then they are bit significant, */
-/* i.e. only one bit is on for each enum */
-/* Reserved fields must be filled with zeros. */
-
-#ifndef _RESIDUAL_
-#define _RESIDUAL_
-
-#ifndef __ASSEMBLY__
-
-#define MAX_CPUS 32 /* These should be set to the maximum */
-#define MAX_MEMS 64 /* number possible for this system. */
-#define MAX_DEVICES 256 /* Changing these will change the */
-#define AVE_PNP_SIZE 32 /* structure, hence the version of */
-#define MAX_MEM_SEGS 64 /* this header file. */
-
-/*----------------------------------------------------------------------------*/
-/* Public structures... */
-/*----------------------------------------------------------------------------*/
-
-#include "pnp.h"
-
-typedef enum _L1CACHE_TYPE {
- NoneCAC = 0,
- SplitCAC = 1,
- CombinedCAC = 2
- } L1CACHE_TYPE;
-
-typedef enum _TLB_TYPE {
- NoneTLB = 0,
- SplitTLB = 1,
- CombinedTLB = 2
- } TLB_TYPE;
-
-typedef enum _FIRMWARE_SUPPORT {
- Conventional = 0x01,
- OpenFirmware = 0x02,
- Diagnostics = 0x04,
- LowDebug = 0x08,
- Multiboot = 0x10,
- LowClient = 0x20,
- Hex41 = 0x40,
- FAT = 0x80,
- ISO9660 = 0x0100,
- SCSI_InitiatorID_Override = 0x0200,
- Tape_Boot = 0x0400,
- FW_Boot_Path = 0x0800
- } FIRMWARE_SUPPORT;
-
-typedef enum _FIRMWARE_SUPPLIERS {
- IBMFirmware = 0x00,
- MotoFirmware = 0x01, /* 7/18/95 */
- FirmWorks = 0x02, /* 10/5/95 */
- Bull = 0x03, /* 04/03/96 */
- } FIRMWARE_SUPPLIERS;
-
-typedef enum _ENDIAN_SWITCH_METHODS {
- UsePort92 = 0x01,
- UsePCIConfigA8 = 0x02,
- UseFF001030 = 0x03,
- } ENDIAN_SWITCH_METHODS;
-
-typedef enum _SPREAD_IO_METHODS {
- UsePort850 = 0x00,
-/*UsePCIConfigA8 = 0x02,*/
- } SPREAD_IO_METHODS;
-
-typedef struct _VPD {
-
- /* Box dependent stuff */
- unsigned char PrintableModel[32]; /* Null terminated string.
- Must be of the form:
- vvv,<20h>,<model designation>,<0x0>
- where vvv is the vendor ID
- e.g. IBM PPS MODEL 6015<0x0> */
- unsigned char Serial[16]; /* 12/94:
- Serial Number; must be of the form:
- vvv<serial number> where vvv is the
- vendor ID.
- e.g. IBM60151234567<20h><20h> */
- unsigned char Reserved[48];
- unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */
- unsigned long FirmwareSupports; /* See FirmwareSupport enum */
- unsigned long NvramSize; /* Size of nvram in bytes */
- unsigned long NumSIMMSlots;
- unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */
- unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */
- unsigned long SmpIar;
- unsigned long RAMErrLogOffset; /* Heap offset to error log */
- unsigned long Reserved5;
- unsigned long Reserved6;
- unsigned long ProcessorHz; /* Processor clock frequency in Hertz */
- unsigned long ProcessorBusHz; /* Processor bus clock frequency */
- unsigned long Reserved7;
- unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */
- unsigned long WordWidth; /* Word width in bits */
- unsigned long PageSize; /* Page size in bytes */
- unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache
- for which coherency is maintained;
- normally <= CacheLineSize. */
- unsigned long GranuleSize; /* Unit of lock allocation to avoid */
- /* false sharing of locks. */
-
- /* L1 Cache variables */
- unsigned long CacheSize; /* L1 Cache size in KB. This is the */
- /* total size of the L1, whether */
- /* combined or split */
- unsigned long CacheAttrib; /* L1CACHE_TYPE */
- unsigned long CacheAssoc; /* L1 Cache associativity. Use this
- for combined cache. If split, put
- zeros here. */
- unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use
- for combined cache. If split, put
- zeros here. */
- /* For split L1 Cache: (= combined if combined cache) */
- unsigned long I_CacheSize;
- unsigned long I_CacheAssoc;
- unsigned long I_CacheLineSize;
- unsigned long D_CacheSize;
- unsigned long D_CacheAssoc;
- unsigned long D_CacheLineSize;
-
- /* Translation Lookaside Buffer variables */
- unsigned long TLBSize; /* Total number of TLBs on the system */
- unsigned long TLBAttrib; /* Combined I+D or split TLB */
- unsigned long TLBAssoc; /* TLB Associativity. Use this for
- combined TLB. If split, put zeros
- here. */
- /* For split TLB: (= combined if combined TLB) */
- unsigned long I_TLBSize;
- unsigned long I_TLBAssoc;
- unsigned long D_TLBSize;
- unsigned long D_TLBAssoc;
-
- unsigned long ExtendedVPD; /* Offset to extended VPD area;
- null if unused */
- } VPD;
-
-typedef enum _DEVICE_FLAGS {
- Enabled = 0x4000, /* 1 - PCI device is enabled */
- Integrated = 0x2000,
- Failed = 0x1000, /* 1 - device failed POST code tests */
- Static = 0x0800, /* 0 - dynamically configurable
- 1 - static */
- Dock = 0x0400, /* 0 - not a docking station device
- 1 - is a docking station device */
- Boot = 0x0200, /* 0 - device cannot be used for BOOT
- 1 - can be a BOOT device */
- Configurable = 0x0100, /* 1 - device is configurable */
- Disableable = 0x80, /* 1 - device can be disabled */
- PowerManaged = 0x40, /* 0 - not managed; 1 - managed */
- ReadOnly = 0x20, /* 1 - device is read only */
- Removable = 0x10, /* 1 - device is removable */
- ConsoleIn = 0x08,
- ConsoleOut = 0x04,
- Input = 0x02,
- Output = 0x01
- } DEVICE_FLAGS;
-
-typedef enum _BUS_ID {
- ISADEVICE = 0x01,
- EISADEVICE = 0x02,
- PCIDEVICE = 0x04,
- PCMCIADEVICE = 0x08,
- PNPISADEVICE = 0x10,
- MCADEVICE = 0x20,
- MXDEVICE = 0x40, /* Devices on mezzanine bus */
- PROCESSORDEVICE = 0x80, /* Devices on processor bus */
- VMEDEVICE = 0x100,
- } BUS_ID;
-
-typedef struct _DEVICE_ID {
- unsigned long BusId; /* See BUS_ID enum above */
- unsigned long DevId; /* Big Endian format */
- unsigned long SerialNum; /* For multiple usage of a single
- DevId */
- unsigned long Flags; /* See DEVICE_FLAGS enum above */
- unsigned char BaseType; /* See pnp.h for bit definitions */
- unsigned char SubType; /* See pnp.h for bit definitions */
- unsigned char Interface; /* See pnp.h for bit definitions */
- unsigned char Spare;
- } DEVICE_ID;
-
-typedef union _BUS_ACCESS {
- struct _PnPAccess{
- unsigned char CSN;
- unsigned char LogicalDevNumber;
- unsigned short ReadDataPort;
- } PnPAccess;
- struct _ISAAccess{
- unsigned char SlotNumber; /* ISA Slot Number generally not
- available; 0 if unknown */
- unsigned char LogicalDevNumber;
- unsigned short ISAReserved;
- } ISAAccess;
- struct _MCAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short MCAReserved;
- } MCAAccess;
- struct _PCMCIAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short PCMCIAReserved;
- } PCMCIAAccess;
- struct _EISAAccess{
- unsigned char SlotNumber;
- unsigned char FunctionNumber;
- unsigned short EISAReserved;
- } EISAAccess;
- struct _PCIAccess{
- unsigned char BusNumber;
- unsigned char DevFuncNumber;
- unsigned short PCIReserved;
- } PCIAccess;
- struct _ProcBusAccess{
- unsigned char BusNumber;
- unsigned char BUID;
- unsigned short ProcBusReserved;
- } ProcBusAccess;
- } BUS_ACCESS;
-
-/* Per logical device information */
-typedef struct _PPC_DEVICE {
- DEVICE_ID DeviceId;
- BUS_ACCESS BusAccess;
-
- /* The following three are offsets into the DevicePnPHeap */
- /* All are in PnP compressed format */
- unsigned long AllocatedOffset; /* Allocated resource description */
- unsigned long PossibleOffset; /* Possible resource description */
- unsigned long CompatibleOffset; /* Compatible device identifiers */
- } PPC_DEVICE;
-
-typedef enum _CPU_STATE {
- CPU_GOOD = 0, /* CPU is present, and active */
- CPU_GOOD_FW = 1, /* CPU is present, and in firmware */
- CPU_OFF = 2, /* CPU is present, but inactive */
- CPU_FAILED = 3, /* CPU is present, but failed POST */
- CPU_NOT_PRESENT = 255 /* CPU not present */
- } CPU_STATE;
-
-typedef struct _PPC_CPU {
- unsigned long CpuType; /* Result of mfspr from Processor
- Version Register (PVR).
- PVR(0-15) = Version (e.g. 601)
- PVR(16-31 = EC Level */
- unsigned char CpuNumber; /* CPU Number for this processor */
- unsigned char CpuState; /* CPU State, see CPU_STATE enum */
- unsigned short Reserved;
- } PPC_CPU;
-
-typedef struct _PPC_MEM {
- unsigned long SIMMSize; /* 0 - absent or bad
- 8M, 32M (in MB) */
- } PPC_MEM;
-
-typedef enum _MEM_USAGE {
- Other = 0x8000,
- ResumeBlock = 0x4000, /* for use by power management */
- SystemROM = 0x2000, /* Flash memory (populated) */
- UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */
- IOMemory = 0x0800,
- SystemIO = 0x0400,
- SystemRegs = 0x0200,
- PCIAddr = 0x0100,
- PCIConfig = 0x80,
- ISAAddr = 0x40,
- Unpopulated = 0x20, /* Unpopulated part of System Memory */
- Free = 0x10, /* Free part of System Memory */
- BootImage = 0x08, /* BootImage part of System Memory */
- FirmwareCode = 0x04, /* FirmwareCode part of System Memory */
- FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */
- FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/
- } MEM_USAGE;
-
-typedef struct _MEM_MAP {
- unsigned long Usage; /* See MEM_USAGE above */
- unsigned long BasePage; /* Page number measured in 4KB pages */
- unsigned long PageCount; /* Page count measured in 4KB pages */
- } MEM_MAP;
-
-typedef struct _RESIDUAL {
- unsigned long ResidualLength; /* Length of Residual */
- unsigned char Version; /* of this data structure */
- unsigned char Revision; /* of this data structure */
- unsigned short EC; /* of this data structure */
- /* VPD */
- VPD VitalProductData;
- /* CPU */
- unsigned short MaxNumCpus; /* Max CPUs in this system */
- unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */
- /* that there are unpopulated or */
- /* otherwise unusable cpu locations */
- PPC_CPU Cpus[MAX_CPUS];
- /* Memory */
- unsigned long TotalMemory; /* Total amount of memory installed */
- unsigned long GoodMemory; /* Total amount of good memory */
- unsigned long ActualNumMemSegs;
- MEM_MAP Segs[MAX_MEM_SEGS];
- unsigned long ActualNumMemories;
- PPC_MEM Memories[MAX_MEMS];
- /* Devices */
- unsigned long ActualNumDevices;
- PPC_DEVICE Devices[MAX_DEVICES];
- unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
- } RESIDUAL;
-
-
-extern RESIDUAL *res;
-extern void print_residual_device_info(void);
-extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
- unsigned char * DevID, int BaseType,
- int SubType, int Interface, int n);
-extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
- int n);
-extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _RESIDUAL_ */
+++ /dev/null
-#ifndef _ASM_PPC_SIGCONTEXT_H
-#define _ASM_PPC_SIGCONTEXT_H
-
-#include <asm/ptrace.h>
-
-
-struct sigcontext_struct {
- unsigned long _unused[4];
- int signal;
- unsigned long handler;
- unsigned long oldmask;
- struct pt_regs *regs;
-};
-
-#endif
+++ /dev/null
-#ifndef _ASMPPC_SIGNAL_H
-#define _ASMPPC_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_PROBE SA_ONESHOT
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#endif
-
-#define SIG_BLOCK 0 /* for blocking signals */
-#define SIG_UNBLOCK 1 /* for unblocking signals */
-#define SIG_SETMASK 2 /* for setting the signal mask */
-
-/* Type of a signal handler. */
-typedef void (*__sighandler_t)(int);
-
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
-
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * asm/status_led.h
- *
- * MPC8xx/MPC8260/MPC5xx based status led support functions
- */
-
-#ifndef __ASM_STATUS_LED_H__
-#define __ASM_STATUS_LED_H__
-
-/* if not overriden */
-#ifndef CONFIG_BOARD_SPECIFIC_LED
-# if defined(CONFIG_8xx)
-# include <mpc8xx.h>
-# elif defined(CONFIG_8260)
-# include <mpc8260.h>
-# elif defined(CONFIG_5xx)
-# include <mpc5xx.h>
-# else
-# error CPU specific Status LED header file missing.
-#endif
-
-/* led_id_t is unsigned long mask */
-typedef unsigned long led_id_t;
-
-static inline void __led_init (led_id_t mask, int state)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#ifdef STATUS_LED_PAR
- immr->STATUS_LED_PAR &= ~mask;
-#endif
-#ifdef STATUS_LED_ODR
- immr->STATUS_LED_ODR &= ~mask;
-#endif
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- immr->STATUS_LED_DAT &= ~mask;
- else
- immr->STATUS_LED_DAT |= mask;
-#else
- if (state == STATUS_LED_ON)
- immr->STATUS_LED_DAT |= mask;
- else
- immr->STATUS_LED_DAT &= ~mask;
-#endif
-#ifdef STATUS_LED_DIR
- immr->STATUS_LED_DIR |= mask;
-#endif
-}
-
-static inline void __led_toggle (led_id_t mask)
-{
- ((immap_t *) CONFIG_SYS_IMMR)->STATUS_LED_DAT ^= mask;
-}
-
-static inline void __led_set (led_id_t mask, int state)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- immr->STATUS_LED_DAT &= ~mask;
- else
- immr->STATUS_LED_DAT |= mask;
-#else
- if (state == STATUS_LED_ON)
- immr->STATUS_LED_DAT |= mask;
- else
- immr->STATUS_LED_DAT &= ~mask;
-#endif
-
-}
-
-#endif
-
-#endif /* __ASM_STATUS_LED_H__ */
+++ /dev/null
-#ifndef _PPC_STRING_H_
-#define _PPC_STRING_H_
-
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRNCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-
-extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, int);
-extern char * strcpy(char *,const char *);
-extern char * strncpy(char *,const char *, __kernel_size_t);
-extern __kernel_size_t strlen(const char *);
-extern int strcmp(const char *,const char *);
-extern char * strcat(char *, const char *);
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * memmove(void *,const void *,__kernel_size_t);
-extern int memcmp(const void *,const void *,__kernel_size_t);
-extern void * memchr(const void *,int,__kernel_size_t);
-
-#endif
+++ /dev/null
-#ifndef _PPC_TYPES_H
-#define _PPC_TYPES_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-typedef struct {
- __u32 u[4];
-} __attribute__((aligned(16))) vector128;
-
-#ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* DMA addresses are 32-bits wide */
-typedef u32 dma_addr_t;
-
-#ifdef CONFIG_PHYS_64BIT
-typedef unsigned long long phys_addr_t;
-typedef unsigned long long phys_size_t;
-#else
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- * NOTE: This header file defines an interface to U-Boot. Including
- * this (unmodified) header file in another file is considered normal
- * use of U-Boot, and does *not* fall under the heading of "derived
- * work".
- ********************************************************************
- */
-
-#ifndef __U_BOOT_H__
-#define __U_BOOT_H__
-
-/*
- * Board information passed to Linux kernel from U-Boot
- *
- * include/asm-ppc/u-boot.h
- */
-
-#ifndef __ASSEMBLY__
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- phys_size_t bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
- || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
- unsigned long bi_immr_base; /* base of IMMR register */
-#endif
-#if defined(CONFIG_MPC5xxx)
- unsigned long bi_mbar_base; /* base of internal registers */
-#endif
-#if defined(CONFIG_MPC83xx)
- unsigned long bi_immrbar;
-#endif
-#if defined(CONFIG_MPC8220)
- unsigned long bi_mbar_base; /* base of internal registers */
- unsigned long bi_inpfreq; /* Input Freq, In MHz */
- unsigned long bi_pcifreq; /* PCI Freq, in MHz */
- unsigned long bi_pevfreq; /* PEV Freq, in MHz */
- unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
- unsigned long bi_vcofreq; /* VCO Freq, in MHz */
-#endif
- unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
- unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
- unsigned long bi_intfreq; /* Internal Freq, in MHz */
- unsigned long bi_busfreq; /* Bus Freq, in MHz */
-#if defined(CONFIG_CPM2)
- unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
- unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
- unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
- unsigned long bi_vco; /* VCO Out from PLL, in MHz */
-#endif
-#if defined(CONFIG_MPC512X)
- unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */
-#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC5xxx)
- unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
- unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
-#endif
- unsigned long bi_baudrate; /* Console Baudrate */
-#if defined(CONFIG_405) || \
- defined(CONFIG_405GP) || \
- defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || \
- defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || \
- defined(CONFIG_440)
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
- unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
- unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
-
-#ifdef CONFIG_HAS_ETH1
- unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
-#endif
-#ifdef CONFIG_HAS_ETH2
- unsigned char bi_enet2addr[6]; /* OLD: see README.enetaddr */
-#endif
-#ifdef CONFIG_HAS_ETH3
- unsigned char bi_enet3addr[6]; /* OLD: see README.enetaddr */
-#endif
-#ifdef CONFIG_HAS_ETH4
- unsigned char bi_enet4addr[6]; /* OLD: see README.enetaddr */
-#endif
-#ifdef CONFIG_HAS_ETH5
- unsigned char bi_enet5addr[6]; /* OLD: see README.enetaddr */
-#endif
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
- defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned int bi_opbfreq; /* OPB clock in Hz */
- int bi_iic_fast[2]; /* Use fast i2c mode */
-#endif
-#if defined(CONFIG_NX823)
- unsigned char bi_sernum[8];
-#endif
-#if defined(CONFIG_4xx)
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- int bi_phynum[4]; /* Determines phy mapping */
- int bi_phymode[4]; /* Determines phy mode */
-#elif defined(CONFIG_405EP) || defined(CONFIG_440)
- int bi_phynum[2]; /* Determines phy mapping */
- int bi_phymode[2]; /* Determines phy mode */
-#else
- int bi_phynum[1]; /* Determines phy mapping */
- int bi_phymode[1]; /* Determines phy mode */
-#endif
-#endif /* defined(CONFIG_4xx) */
-} bd_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __U_BOOT_H__ */
+++ /dev/null
-#ifndef _ASM_POWERPC_UNALIGNED_H
-#define _ASM_POWERPC_UNALIGNED_H
-
-#ifdef __KERNEL__
-
-/*
- * The PowerPC can do unaligned accesses itself in big endian mode.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_UNALIGNED_H */
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef XILINX_IRQ_H
-#define XILINX_IRQ_H
-
-#define intc XPAR_INTC_0_BASEADDR
-#define ISR (intc + (0 * 4)) /* Interrupt Status Register */
-#define IPR (intc + (1 * 4)) /* Interrupt Pending Register */
-#define IER (intc + (2 * 4)) /* Interrupt Enable Register */
-#define IAR (intc + (3 * 4)) /* Interrupt Acknowledge Register */
-#define SIE (intc + (4 * 4)) /* Set Interrupt Enable bits */
-#define CIE (intc + (5 * 4)) /* Clear Interrupt Enable bits */
-#define IVR (intc + (6 * 4)) /* Interrupt Vector Register */
-#define MER (intc + (7 * 4)) /* Master Enable Register */
-
-#define IRQ_MASK(irq) (1 << (irq & 0x1f))
-
-#define IRQ_MAX XPAR_INTC_MAX_NUM_INTR_INPUTS
-
-#endif
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(ARCH).a
-
-SOBJS-y += ppccache.o
-SOBJS-y += ppcstring.o
-SOBJS-y += ticks.o
-SOBJS-y += reloc.o
-
-COBJS-y += bat_rw.o
-COBJS-y += board.o
-COBJS-y += bootm.o
-COBJS-y += cache.o
-COBJS-y += extable.o
-COBJS-y += interrupts.o
-COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
-COBJS-y += time.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-$(LIB): $(obj).depend $(OBJS)
- @if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\
- then \
- echo "ERROR: Your compiler doesn't generate .fixup sections!";\
- echo " Upgrade to a recent toolchain."; \
- exit 1; \
- fi;
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_ADDR_MAP
-#include <addr_map.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int write_bat (ppc_bat_t bat, unsigned long upper, unsigned long lower)
-{
- int batn = -1;
-
- sync();
-
- switch (bat) {
- case DBAT0:
- mtspr (DBAT0L, lower);
- mtspr (DBAT0U, upper);
- batn = 0;
- break;
- case IBAT0:
- mtspr (IBAT0L, lower);
- mtspr (IBAT0U, upper);
- break;
- case DBAT1:
- mtspr (DBAT1L, lower);
- mtspr (DBAT1U, upper);
- batn = 1;
- break;
- case IBAT1:
- mtspr (IBAT1L, lower);
- mtspr (IBAT1U, upper);
- break;
- case DBAT2:
- mtspr (DBAT2L, lower);
- mtspr (DBAT2U, upper);
- batn = 2;
- break;
- case IBAT2:
- mtspr (IBAT2L, lower);
- mtspr (IBAT2U, upper);
- break;
- case DBAT3:
- mtspr (DBAT3L, lower);
- mtspr (DBAT3U, upper);
- batn = 3;
- break;
- case IBAT3:
- mtspr (IBAT3L, lower);
- mtspr (IBAT3U, upper);
- break;
-#ifdef CONFIG_HIGH_BATS
- case DBAT4:
- mtspr (DBAT4L, lower);
- mtspr (DBAT4U, upper);
- batn = 4;
- break;
- case IBAT4:
- mtspr (IBAT4L, lower);
- mtspr (IBAT4U, upper);
- break;
- case DBAT5:
- mtspr (DBAT5L, lower);
- mtspr (DBAT5U, upper);
- batn = 5;
- break;
- case IBAT5:
- mtspr (IBAT5L, lower);
- mtspr (IBAT5U, upper);
- break;
- case DBAT6:
- mtspr (DBAT6L, lower);
- mtspr (DBAT6U, upper);
- batn = 6;
- break;
- case IBAT6:
- mtspr (IBAT6L, lower);
- mtspr (IBAT6U, upper);
- break;
- case DBAT7:
- mtspr (DBAT7L, lower);
- mtspr (DBAT7U, upper);
- batn = 7;
- break;
- case IBAT7:
- mtspr (IBAT7L, lower);
- mtspr (IBAT7U, upper);
- break;
-#endif
- default:
- return (-1);
- }
-
-#ifdef CONFIG_ADDR_MAP
- if ((gd->flags & GD_FLG_RELOC) && (batn >= 0)) {
- phys_size_t size;
- if (!BATU_VALID(upper))
- size = 0;
- else
- size = BATU_SIZE(upper);
- addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
- size, batn);
- }
-#endif
-
- sync();
- isync();
-
- return (0);
-}
-
-int read_bat (ppc_bat_t bat, unsigned long *upper, unsigned long *lower)
-{
- unsigned long register u;
- unsigned long register l;
-
- switch (bat) {
- case DBAT0:
- l = mfspr (DBAT0L);
- u = mfspr (DBAT0U);
- break;
- case IBAT0:
- l = mfspr (IBAT0L);
- u = mfspr (IBAT0U);
- break;
- case DBAT1:
- l = mfspr (DBAT1L);
- u = mfspr (DBAT1U);
- break;
- case IBAT1:
- l = mfspr (IBAT1L);
- u = mfspr (IBAT1U);
- break;
- case DBAT2:
- l = mfspr (DBAT2L);
- u = mfspr (DBAT2U);
- break;
- case IBAT2:
- l = mfspr (IBAT2L);
- u = mfspr (IBAT2U);
- break;
- case DBAT3:
- l = mfspr (DBAT3L);
- u = mfspr (DBAT3U);
- break;
- case IBAT3:
- l = mfspr (IBAT3L);
- u = mfspr (IBAT3U);
- break;
-#ifdef CONFIG_HIGH_BATS
- case DBAT4:
- l = mfspr (DBAT4L);
- u = mfspr (DBAT4U);
- break;
- case IBAT4:
- l = mfspr (IBAT4L);
- u = mfspr (IBAT4U);
- break;
- case DBAT5:
- l = mfspr (DBAT5L);
- u = mfspr (DBAT5U);
- break;
- case IBAT5:
- l = mfspr (IBAT5L);
- u = mfspr (IBAT5U);
- break;
- case DBAT6:
- l = mfspr (DBAT6L);
- u = mfspr (DBAT6U);
- break;
- case IBAT6:
- l = mfspr (IBAT6L);
- u = mfspr (IBAT6U);
- break;
- case DBAT7:
- l = mfspr (DBAT7L);
- u = mfspr (DBAT7U);
- break;
- case IBAT7:
- l = mfspr (IBAT7L);
- u = mfspr (IBAT7U);
- break;
-#endif
- default:
- return (-1);
- }
-
- *upper = u;
- *lower = l;
-
- return (0);
-}
-
-void print_bats(void)
-{
- printf("BAT registers:\n");
-
- printf ("\tIBAT0L = 0x%08X ", mfspr (IBAT0L));
- printf ("\tIBAT0U = 0x%08X\n", mfspr (IBAT0U));
- printf ("\tDBAT0L = 0x%08X ", mfspr (DBAT0L));
- printf ("\tDBAT0U = 0x%08X\n", mfspr (DBAT0U));
- printf ("\tIBAT1L = 0x%08X ", mfspr (IBAT1L));
- printf ("\tIBAT1U = 0x%08X\n", mfspr (IBAT1U));
- printf ("\tDBAT1L = 0x%08X ", mfspr (DBAT1L));
- printf ("\tDBAT1U = 0x%08X\n", mfspr (DBAT1U));
- printf ("\tIBAT2L = 0x%08X ", mfspr (IBAT2L));
- printf ("\tIBAT2U = 0x%08X\n", mfspr (IBAT2U));
- printf ("\tDBAT2L = 0x%08X ", mfspr (DBAT2L));
- printf ("\tDBAT2U = 0x%08X\n", mfspr (DBAT2U));
- printf ("\tIBAT3L = 0x%08X ", mfspr (IBAT3L));
- printf ("\tIBAT3U = 0x%08X\n", mfspr (IBAT3U));
- printf ("\tDBAT3L = 0x%08X ", mfspr (DBAT3L));
- printf ("\tDBAT3U = 0x%08X\n", mfspr (DBAT3U));
-
-#ifdef CONFIG_HIGH_BATS
- printf ("\tIBAT4L = 0x%08X ", mfspr (IBAT4L));
- printf ("\tIBAT4U = 0x%08X\n", mfspr (IBAT4U));
- printf ("\tDBAT4L = 0x%08X ", mfspr (DBAT4L));
- printf ("\tDBAT4U = 0x%08X\n", mfspr (DBAT4U));
- printf ("\tIBAT5L = 0x%08X ", mfspr (IBAT5L));
- printf ("\tIBAT5U = 0x%08X\n", mfspr (IBAT5U));
- printf ("\tDBAT5L = 0x%08X ", mfspr (DBAT5L));
- printf ("\tDBAT5U = 0x%08X\n", mfspr (DBAT5U));
- printf ("\tIBAT6L = 0x%08X ", mfspr (IBAT6L));
- printf ("\tIBAT6U = 0x%08X\n", mfspr (IBAT6U));
- printf ("\tDBAT6L = 0x%08X ", mfspr (DBAT6L));
- printf ("\tDBAT6U = 0x%08X\n", mfspr (DBAT6U));
- printf ("\tIBAT7L = 0x%08X ", mfspr (IBAT7L));
- printf ("\tIBAT7U = 0x%08X\n", mfspr (IBAT7U));
- printf ("\tDBAT7L = 0x%08X ", mfspr (DBAT7L));
- printf ("\tDBAT7U = 0x%08X\n", mfspr (DBAT7U));
-#endif
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#ifdef CONFIG_8xx
-#include <mpc8xx.h>
-#endif
-#ifdef CONFIG_5xx
-#include <mpc5xx.h>
-#endif
-#ifdef CONFIG_MPC5xxx
-#include <mpc5xxx.h>
-#endif
-#if defined(CONFIG_CMD_IDE)
-#include <ide.h>
-#endif
-#if defined(CONFIG_CMD_SCSI)
-#include <scsi.h>
-#endif
-#if defined(CONFIG_CMD_KGDB)
-#include <kgdb.h>
-#endif
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-#include <net.h>
-#ifdef CONFIG_GENERIC_MMC
-#include <mmc.h>
-#endif
-#include <serial.h>
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-#if !defined(CONFIG_CPM2)
-#include <commproc.h>
-#endif
-#endif
-#include <version.h>
-#if defined(CONFIG_BAB7xx)
-#include <w83c553f.h>
-#endif
-#include <dtt.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
-#if defined(CONFIG_LOGBUFFER)
-#include <logbuff.h>
-#endif
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
-#include <asm/cache.h>
-#endif
-#ifdef CONFIG_PS2KBD
-#include <keyboard.h>
-#endif
-
-#ifdef CONFIG_ADDR_MAP
-#include <asm/mmu.h>
-#endif
-
-#ifdef CONFIG_MP
-#include <asm/mp.h>
-#endif
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-extern int update_flash_size (int flash_size);
-#endif
-
-#if defined(CONFIG_SC3)
-extern void sc3_read_eeprom(void);
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void);
-#endif
-#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
-#include <i2c.h>
-#endif
-#include <spi.h>
-#include <nand.h>
-
-static char *failed = "*** failed ***\n";
-
-#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
-extern flash_info_t flash_info[];
-#endif
-
-#if defined(CONFIG_START_IDE)
-extern int board_start_ide(void);
-#endif
-#include <environment.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_ENV_IS_EMBEDDED)
-#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
-#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
- (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
- defined(CONFIG_ENV_IS_IN_NVRAM)
-#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
-#else
-#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
-#endif
-
-#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
-#define CONFIG_SYS_MEM_TOP_HIDE 0
-#endif
-
-extern ulong __init_end;
-extern ulong _end;
-ulong monitor_flash_len;
-
-#if defined(CONFIG_CMD_BEDBUG)
-#include <bedbug/type.h>
-#endif
-
-/************************************************************************
- * Utilities *
- ************************************************************************
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-/************************************************************************
- * Init Utilities *
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * but let's get it working (again) first...
- */
-
-static int init_baudrate (void)
-{
- char tmp[64]; /* long enough for environment variables */
- int i = getenv_r ("baudrate", tmp, sizeof (tmp));
-
- gd->baudrate = (i > 0)
- ? (int) simple_strtoul (tmp, NULL, 10)
- : CONFIG_BAUDRATE;
- return (0);
-}
-
-/***********************************************************************/
-
-void __board_add_ram_info(int use_default)
-{
- /* please define platform specific board_add_ram_info() */
-}
-void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
-
-
-static int init_func_ram (void)
-{
-#ifdef CONFIG_BOARD_TYPES
- int board_type = gd->board_type;
-#else
- int board_type = 0; /* use dummy arg */
-#endif
- puts ("DRAM: ");
-
- if ((gd->ram_size = initdram (board_type)) > 0) {
- print_size (gd->ram_size, "");
- board_add_ram_info(0);
- putc('\n');
- return (0);
- }
- puts (failed);
- return (1);
-}
-
-/***********************************************************************/
-
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
-{
- puts ("I2C: ");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- puts ("ready\n");
- return (0);
-}
-#endif
-
-#if defined(CONFIG_HARD_SPI)
-static int init_func_spi (void)
-{
- puts ("SPI: ");
- spi_init ();
- puts ("ready\n");
- return (0);
-}
-#endif
-
-/***********************************************************************/
-
-#if defined(CONFIG_WATCHDOG)
-static int init_func_watchdog_init (void)
-{
- puts (" Watchdog enabled\n");
- WATCHDOG_RESET ();
- return (0);
-}
-# define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
-
-static int init_func_watchdog_reset (void)
-{
- WATCHDOG_RESET ();
- return (0);
-}
-# define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
-#else
-# define INIT_FUNC_WATCHDOG_INIT /* undef */
-# define INIT_FUNC_WATCHDOG_RESET /* undef */
-#endif /* CONFIG_WATCHDOG */
-
-/************************************************************************
- * Initialization sequence *
- ************************************************************************
- */
-
-init_fnc_t *init_sequence[] = {
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- probecpu,
-#endif
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
- board_early_init_f,
-#endif
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
- get_clocks, /* get CPU and bus clocks (etc.) */
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
- && !defined(CONFIG_TQM885D)
- adjust_sdram_tbs_8xx,
-#endif
- init_timebase,
-#endif
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-#if !defined(CONFIG_CPM2)
- dpram_init,
-#endif
-#endif
-#if defined(CONFIG_BOARD_POSTCLK_INIT)
- board_postclk_init,
-#endif
- env_init,
-#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
- get_clocks_866, /* get CPU and bus clocks according to the environment variable */
- sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */
- init_timebase,
-#endif
- init_baudrate,
- serial_init,
- console_init_f,
- display_options,
-#if defined(CONFIG_8260)
- prt_8260_rsr,
- prt_8260_clks,
-#endif /* CONFIG_8260 */
-#if defined(CONFIG_MPC83xx)
- prt_83xx_rsr,
-#endif
- checkcpu,
-#if defined(CONFIG_MPC5xxx)
- prt_mpc5xxx_clks,
-#endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
- prt_mpc8220_clks,
-#endif
- checkboard,
- INIT_FUNC_WATCHDOG_INIT
-#if defined(CONFIG_MISC_INIT_F)
- misc_init_f,
-#endif
- INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- init_func_i2c,
-#endif
-#if defined(CONFIG_HARD_SPI)
- init_func_spi,
-#endif
-#ifdef CONFIG_POST
- post_init_f,
-#endif
- INIT_FUNC_WATCHDOG_RESET
- init_func_ram,
-#if defined(CONFIG_SYS_DRAM_TEST)
- testdram,
-#endif /* CONFIG_SYS_DRAM_TEST */
- INIT_FUNC_WATCHDOG_RESET
-
- NULL, /* Terminate this list */
-};
-
-ulong get_effective_memsize(void)
-{
-#ifndef CONFIG_VERY_BIG_RAM
- return gd->ram_size;
-#else
- /* limit stack to what we can reasonable map */
- return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
- CONFIG_MAX_MEM_MAPPED : gd->ram_size);
-#endif
-}
-
-/************************************************************************
- *
- * This is the first part of the initialization sequence that is
- * implemented in C, but still running from ROM.
- *
- * The main purpose is to provide a (serial) console interface as
- * soon as possible (so we can see any error messages), and to
- * initialize the RAM so that we can relocate the monitor code to
- * RAM.
- *
- * Be aware of the restrictions: global data is read-only, BSS is not
- * initialized, and stack space is limited to a few kB.
- *
- ************************************************************************
- */
-
-#ifdef CONFIG_LOGBUFFER
-unsigned long logbuffer_base(void)
-{
- return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
-}
-#endif
-
-void board_init_f (ulong bootflag)
-{
- bd_t *bd;
- ulong len, addr, addr_sp;
- ulong *s;
- gd_t *id;
- init_fnc_t **init_fnc_ptr;
-#ifdef CONFIG_PRAM
- int i;
- ulong reg;
- uchar tmp[64]; /* long enough for environment variables */
-#endif
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("": : :"memory");
-
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
- !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
- !defined(CONFIG_MPC86xx)
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-#endif
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr) () != 0) {
- hang ();
- }
- }
-
- /*
- * Now that we have DRAM mapped and working, we can
- * relocate the code and continue running from DRAM.
- *
- * Reserve memory at end of RAM for (top down in that order):
- * - area that won't get touched by U-Boot and Linux (optional)
- * - kernel log buffer
- * - protected RAM
- * - LCD framebuffer
- * - monitor code
- * - board info struct
- */
- len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
-
- /*
- * Subtract specified amount of memory to hide so that it won't
- * get "touched" at all by U-Boot. By fixing up gd->ram_size
- * the Linux kernel should now get passed the now "corrected"
- * memory size and won't touch it either. This should work
- * for arch/ppc and arch/powerpc. Only Linux board ports in
- * arch/powerpc with bootwrapper support, that recalculate the
- * memory size from the SDRAM controller setup will have to
- * get fixed.
- */
- gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
-
- addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
-
-#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
- /*
- * We need to make sure the location we intend to put secondary core
- * boot code is reserved and not used by any part of u-boot
- */
- if (addr > determine_mp_bootpg()) {
- addr = determine_mp_bootpg();
- debug ("Reserving MP boot page to %08lx\n", addr);
- }
-#endif
-
-#ifdef CONFIG_LOGBUFFER
-#ifndef CONFIG_ALT_LB_ADDR
- /* reserve kernel log buffer */
- addr -= (LOGBUFF_RESERVE);
- debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
-#endif
-#endif
-
-#ifdef CONFIG_PRAM
- /*
- * reserve protected RAM
- */
- i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
- reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
- addr -= (reg << 10); /* size is in kB */
- debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
-#endif /* CONFIG_PRAM */
-
- /* round down to next 4 kB limit */
- addr &= ~(4096 - 1);
- debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
-#ifdef CONFIG_LCD
- /* reserve memory for LCD display (always full pages) */
- addr = lcd_setmem (addr);
- gd->fb_base = addr;
-#endif /* CONFIG_LCD */
-
-#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
- /* reserve memory for video display (always full pages) */
- addr = video_setmem (addr);
- gd->fb_base = addr;
-#endif /* CONFIG_VIDEO */
-
- /*
- * reserve memory for U-Boot code, data & bss
- * round down to next 4 kB limit
- */
- addr -= len;
- addr &= ~(4096 - 1);
-#ifdef CONFIG_E500
- /* round down to next 64 kB limit so that IVPR stays aligned */
- addr &= ~(65536 - 1);
-#endif
-
- debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
- /*
- * reserve memory for malloc() arena
- */
- addr_sp = addr - TOTAL_MALLOC_LEN;
- debug ("Reserving %dk for malloc() at: %08lx\n",
- TOTAL_MALLOC_LEN >> 10, addr_sp);
-
- /*
- * (permanently) allocate a Board Info struct
- * and a permanent copy of the "global" data
- */
- addr_sp -= sizeof (bd_t);
- bd = (bd_t *) addr_sp;
- gd->bd = bd;
- debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
- sizeof (bd_t), addr_sp);
- addr_sp -= sizeof (gd_t);
- id = (gd_t *) addr_sp;
- debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
- sizeof (gd_t), addr_sp);
-
- /*
- * Finally, we set up a new (bigger) stack.
- *
- * Leave some safety gap for SP, force alignment on 16 byte boundary
- * Clear initial stack frame
- */
- addr_sp -= 16;
- addr_sp &= ~0xF;
- s = (ulong *)addr_sp;
- *s-- = 0;
- *s-- = 0;
- addr_sp = (ulong)s;
- debug ("Stack Pointer at: %08lx\n", addr_sp);
-
- /*
- * Save local variables to board info struct
- */
-
- bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
- bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
-
-#ifdef CONFIG_IP860
- bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
- bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
-#elif defined CONFIG_MPC8220
- bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
- bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
-#else
- bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
- bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
-#endif
-
-#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
- defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
- bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
-#endif
-#if defined(CONFIG_MPC5xxx)
- bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
-#endif
-#if defined(CONFIG_MPC83xx)
- bd->bi_immrbar = CONFIG_SYS_IMMR;
-#endif
-#if defined(CONFIG_MPC8220)
- bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
- bd->bi_inpfreq = gd->inp_clk;
- bd->bi_pcifreq = gd->pci_clk;
- bd->bi_vcofreq = gd->vco_clk;
- bd->bi_pevfreq = gd->pev_clk;
- bd->bi_flbfreq = gd->flb_clk;
-
- /* store bootparam to sram (backward compatible), here? */
- {
- u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
- *sram++ = gd->ram_size;
- *sram++ = gd->bus_clk;
- *sram++ = gd->inp_clk;
- *sram++ = gd->cpu_clk;
- *sram++ = gd->vco_clk;
- *sram++ = gd->flb_clk;
- *sram++ = 0xb8c3ba11; /* boot signature */
- }
-#endif
-
- bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
-
- WATCHDOG_RESET ();
- bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
- bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
-#if defined(CONFIG_CPM2)
- bd->bi_cpmfreq = gd->cpm_clk;
- bd->bi_brgfreq = gd->brg_clk;
- bd->bi_sccfreq = gd->scc_clk;
- bd->bi_vco = gd->vco_out;
-#endif /* CONFIG_CPM2 */
-#if defined(CONFIG_MPC512X)
- bd->bi_ipsfreq = gd->ips_clk;
-#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC5xxx)
- bd->bi_ipbfreq = gd->ipb_clk;
- bd->bi_pcifreq = gd->pci_clk;
-#endif /* CONFIG_MPC5xxx */
- bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
-
-#ifdef CONFIG_SYS_EXTBDINFO
- strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
- strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
-
- bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
- bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- bd->bi_pci_busfreq = get_PCI_freq ();
- bd->bi_opbfreq = get_OPB_freq ();
-#elif defined(CONFIG_XILINX_405)
- bd->bi_pci_busfreq = get_PCI_freq ();
-#endif
-#endif
-
- debug ("New Stack Pointer is: %08lx\n", addr_sp);
-
- WATCHDOG_RESET ();
-
-#ifdef CONFIG_POST
- post_bootmode_init();
- post_run (NULL, POST_ROM | post_bootmode_get(0));
-#endif
-
- WATCHDOG_RESET();
-
- gd->relocaddr = addr; /* Record relocation address, useful for debug */
-
- memcpy (id, (void *)gd, sizeof (gd_t));
-
- relocate_code (addr_sp, id, addr);
-
- /* NOTREACHED - relocate_code() does not return */
-}
-
-/************************************************************************
- *
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- *
- ************************************************************************
- */
-void board_init_r (gd_t *id, ulong dest_addr)
-{
- char *s;
- bd_t *bd;
- ulong malloc_start;
-
-#ifndef CONFIG_SYS_NO_FLASH
- ulong flash_size;
-#endif
-
- gd = id; /* initialize RAM version of global data */
- bd = gd->bd;
-
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-
- /* The Malloc area is immediately below the monitor copy in DRAM */
- malloc_start = dest_addr - TOTAL_MALLOC_LEN;
-
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- /*
- * The gd->cpu pointer is set to an address in flash before relocation.
- * We need to update it to point to the same CPU entry in RAM.
- */
- gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
-#endif
-
-#ifdef CONFIG_SERIAL_MULTI
- serial_initialize();
-#endif
-
- debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
- WATCHDOG_RESET ();
-
- /*
- * Setup trap handlers
- */
- trap_init (dest_addr);
-
-#ifdef CONFIG_ADDR_MAP
- init_addr_map();
-#endif
-
-#if defined(CONFIG_BOARD_EARLY_INIT_R)
- board_early_init_r ();
-#endif
-
- monitor_flash_len = (ulong)&__init_end - dest_addr;
-
- WATCHDOG_RESET ();
-
-#ifdef CONFIG_LOGBUFFER
- logbuff_init_ptrs ();
-#endif
-#ifdef CONFIG_POST
- post_output_backlog ();
-#endif
-
- WATCHDOG_RESET();
-
-#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
- icache_enable (); /* it's time to enable the instruction cache */
-#endif
-
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
- unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
-#endif
-
-#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
- /*
- * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
- * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
- * bridge there.
- */
- pci_init ();
-#endif
-#if defined(CONFIG_BAB7xx)
- /*
- * Initialise the ISA bridge
- */
- initialise_w83c553f ();
-#endif
-
- asm ("sync ; isync");
-
- mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-
-#if !defined(CONFIG_SYS_NO_FLASH)
- puts ("FLASH: ");
-
- if ((flash_size = flash_init ()) > 0) {
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
- print_size (flash_size, "");
- /*
- * Compute and print flash CRC if flashchecksum is set to 'y'
- *
- * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
- */
- s = getenv ("flashchecksum");
- if (s && (*s == 'y')) {
- printf (" CRC: %08X",
- crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
- );
- }
- putc ('\n');
-# else /* !CONFIG_SYS_FLASH_CHECKSUM */
- print_size (flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
- } else {
- puts (failed);
- hang ();
- }
-
- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
- bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
-
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
- /* Make a update of the Memctrl. */
- update_flash_size (flash_size);
-#endif
-
-
-# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
- /* flash mapped at end of memory map */
- bd->bi_flashoffset = TEXT_BASE + flash_size;
-# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
-# else
- bd->bi_flashoffset = 0;
-# endif
-#else /* CONFIG_SYS_NO_FLASH */
-
- bd->bi_flashsize = 0;
- bd->bi_flashstart = 0;
- bd->bi_flashoffset = 0;
-#endif /* !CONFIG_SYS_NO_FLASH */
-
- WATCHDOG_RESET ();
-
- /* initialize higher level parts of CPU like time base and timers */
- cpu_init_r ();
-
- WATCHDOG_RESET ();
-
-#ifdef CONFIG_SPI
-# if !defined(CONFIG_ENV_IS_IN_EEPROM)
- spi_init_f ();
-# endif
- spi_init_r ();
-#endif
-
-#if defined(CONFIG_CMD_NAND)
- WATCHDOG_RESET ();
- puts ("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
- /* relocate environment function pointers etc. */
- env_relocate ();
-
- /*
- * Fill in missing fields of bd_info.
- * We do this here, where we have "normal" access to the
- * environment; we used to do this still running from ROM,
- * where had to use getenv_r(), which can be pretty slow when
- * the environment is in EEPROM.
- */
-
-#if defined(CONFIG_SYS_EXTBDINFO)
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-#if defined(CONFIG_I2CFAST)
- /*
- * set bi_iic_fast for linux taking environment variable
- * "i2cfast" into account
- */
- {
- char *s = getenv ("i2cfast");
- if (s && ((*s == 'y') || (*s == 'Y'))) {
- bd->bi_iic_fast[0] = 1;
- bd->bi_iic_fast[1] = 1;
- } else {
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
- }
- }
-#else
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
-#endif /* CONFIG_I2CFAST */
-#endif /* CONFIG_405GP, CONFIG_405EP */
-#endif /* CONFIG_SYS_EXTBDINFO */
-
-#if defined(CONFIG_SC3)
- sc3_read_eeprom();
-#endif
-
-#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
- mac_read_from_eeprom();
-#endif
-
-#ifdef CONFIG_HERMES
- if ((gd->board_type >> 16) == 2)
- bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- bd->bi_ethspeed = 0xFFFF;
-#endif
-
-#ifdef CONFIG_CMD_NET
- /* kept around for legacy kernels only ... ignore the next section */
- eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
-#ifdef CONFIG_HAS_ETH1
- eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
-#endif
-#ifdef CONFIG_HAS_ETH2
- eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
-#endif
-#ifdef CONFIG_HAS_ETH3
- eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
-#endif
-#ifdef CONFIG_HAS_ETH4
- eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
-#endif
-#ifdef CONFIG_HAS_ETH5
- eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
-#endif
-#endif /* CONFIG_CMD_NET */
-
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
- WATCHDOG_RESET ();
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
- /*
- * Do pci configuration
- */
- pci_init ();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize stdio devices */
- stdio_init ();
-
- /* Initialize the jump table for applications */
- jumptable_init ();
-
-#if defined(CONFIG_API)
- /* Initialize API */
- api_init ();
-#endif
-
- /* Initialize the console (after the relocation and devices init) */
- console_init_r ();
-
-#if defined(CONFIG_MISC_INIT_R)
- /* miscellaneous platform dependent initialisations */
- misc_init_r ();
-#endif
-
-#ifdef CONFIG_HERMES
- if (bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980 ((int) bd->bi_ethspeed);
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
- WATCHDOG_RESET ();
- puts ("KGDB: ");
- kgdb_init ();
-#endif
-
- debug ("U-Boot relocated to %08lx\n", dest_addr);
-
- /*
- * Enable Interrupts
- */
- interrupt_init ();
-
- /* Must happen after interrupts are initialized since
- * an irq handler gets installed
- */
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
- serial_buffered_init();
-#endif
-
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
- status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
- udelay (20);
-
- set_timer (0);
-
- /* Initialize from environment */
- if ((s = getenv ("loadaddr")) != NULL) {
- load_addr = simple_strtoul (s, NULL, 16);
- }
-#if defined(CONFIG_CMD_NET)
- if ((s = getenv ("bootfile")) != NULL) {
- copy_filename (BootFile, s, sizeof (BootFile));
- }
-#endif
-
- WATCHDOG_RESET ();
-
-#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
- dtt_init ();
-#endif
-#if defined(CONFIG_CMD_SCSI)
- WATCHDOG_RESET ();
- puts ("SCSI: ");
- scsi_init ();
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
- WATCHDOG_RESET ();
- puts ("MMC: ");
- mmc_initialize (bd);
-#endif
-
-#if defined(CONFIG_CMD_DOC)
- WATCHDOG_RESET ();
- puts ("DOC: ");
- doc_init ();
-#endif
-
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-#if defined(CONFIG_NET_MULTI)
- WATCHDOG_RESET ();
- puts ("Net: ");
-#endif
- eth_initialize (bd);
-#endif
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
- WATCHDOG_RESET ();
- debug ("Reset Ethernet PHY\n");
- reset_phy ();
-#endif
-
-#ifdef CONFIG_POST
- post_run (NULL, POST_RAM | post_bootmode_get(0));
-#endif
-
-#if defined(CONFIG_CMD_PCMCIA) \
- && !defined(CONFIG_CMD_IDE)
- WATCHDOG_RESET ();
- puts ("PCMCIA:");
- pcmcia_init ();
-#endif
-
-#if defined(CONFIG_CMD_IDE)
- WATCHDOG_RESET ();
-# ifdef CONFIG_IDE_8xx_PCCARD
- puts ("PCMCIA:");
-# else
- puts ("IDE: ");
-#endif
-#if defined(CONFIG_START_IDE)
- if (board_start_ide())
- ide_init ();
-#else
- ide_init ();
-#endif
-#endif
-
-#ifdef CONFIG_LAST_STAGE_INIT
- WATCHDOG_RESET ();
- /*
- * Some parts can be only initialized if all others (like
- * Interrupts) are up and running (i.e. the PC-style ISA
- * keyboard).
- */
- last_stage_init ();
-#endif
-
-#if defined(CONFIG_CMD_BEDBUG)
- WATCHDOG_RESET ();
- bedbug_init ();
-#endif
-
-#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
- /*
- * Export available size of memory for Linux,
- * taking into account the protected RAM at top of memory
- */
- {
- ulong pram;
- uchar memsz[32];
-#ifdef CONFIG_PRAM
- char *s;
-
- if ((s = getenv ("pram")) != NULL) {
- pram = simple_strtoul (s, NULL, 10);
- } else {
- pram = CONFIG_PRAM;
- }
-#else
- pram=0;
-#endif
-#ifdef CONFIG_LOGBUFFER
-#ifndef CONFIG_ALT_LB_ADDR
- /* Also take the logbuffer into account (pram is in kB) */
- pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
-#endif
-#endif
- sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
- setenv ("mem", (char *)memsz);
- }
-#endif
-
-#ifdef CONFIG_PS2KBD
- puts ("PS/2: ");
- kbd_init();
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
- {
- extern int do_mdm_init;
- do_mdm_init = gd->do_mdm_init;
- }
-#endif
-
- /* Initialization complete - start the monitor */
-
- /* main_loop() can return to retry autoboot, if so just run it again. */
- for (;;) {
- WATCHDOG_RESET ();
- main_loop ();
- }
-
- /* NOTREACHED - no way out of command loop except booting */
-}
-
-void hang (void)
-{
- puts ("### ERROR ### Please RESET the board ###\n");
- show_boot_progress(-30);
- for (;;);
-}
-
-
-#if 0 /* We could use plain global data, but the resulting code is bigger */
-/*
- * Pointer to initial global data area
- *
- * Here we initialize it.
- */
-#undef XTRN_DECLARE_GLOBAL_DATA_PTR
-#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-#endif /* 0 */
-
-/************************************************************************/
+++ /dev/null
-/*
- * (C) Copyright 2008 Semihalf
- *
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <image.h>
-#include <malloc.h>
-#include <u-boot/zlib.h>
-#include <bzlib.h>
-#include <environment.h>
-#include <asm/byteorder.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <fdt.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#endif
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-#include <asm/cache.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-extern ulong get_effective_memsize(void);
-static ulong get_sp (void);
-static void set_clocks_in_mhz (bd_t *kbd);
-
-#ifndef CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE
-#define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE (768*1024*1024)
-#endif
-
-static void boot_jump_linux(bootm_headers_t *images)
-{
- void (*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
- ulong r7, ulong r8, ulong r9);
-#ifdef CONFIG_OF_LIBFDT
- char *of_flat_tree = images->ft_addr;
-#endif
-
- kernel = (void (*)(bd_t *, ulong, ulong, ulong,
- ulong, ulong, ulong))images->ep;
- debug ("## Transferring control to Linux (at address %08lx) ...\n",
- (ulong)kernel);
-
- show_boot_progress (15);
-
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && !defined(CONFIG_E500)
- unlock_ram_in_cache();
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
- if (of_flat_tree) { /* device tree; boot new style */
- /*
- * Linux Kernel Parameters (passing device tree):
- * r3: pointer to the fdt
- * r4: 0
- * r5: 0
- * r6: epapr magic
- * r7: size of IMA in bytes
- * r8: 0
- * r9: 0
- */
-#if defined(CONFIG_85xx) || defined(CONFIG_440)
- #define EPAPR_MAGIC (0x45504150)
-#else
- #define EPAPR_MAGIC (0x65504150)
-#endif
-
- debug (" Booting using OF flat tree...\n");
- WATCHDOG_RESET ();
- (*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
- CONFIG_SYS_BOOTMAPSZ, 0, 0);
- /* does not return */
- } else
-#endif
- {
- /*
- * Linux Kernel Parameters (passing board info data):
- * r3: ptr to board info data
- * r4: initrd_start or 0 if no initrd
- * r5: initrd_end - unused if r4 is 0
- * r6: Start of command line string
- * r7: End of command line string
- * r8: 0
- * r9: 0
- */
- ulong cmd_start = images->cmdline_start;
- ulong cmd_end = images->cmdline_end;
- ulong initrd_start = images->initrd_start;
- ulong initrd_end = images->initrd_end;
- bd_t *kbd = images->kbd;
-
- debug (" Booting using board info...\n");
- WATCHDOG_RESET ();
- (*kernel) (kbd, initrd_start, initrd_end,
- cmd_start, cmd_end, 0, 0);
- /* does not return */
- }
- return ;
-}
-
-void arch_lmb_reserve(struct lmb *lmb)
-{
- phys_size_t bootm_size;
- ulong size, sp, bootmap_base;
-
- bootmap_base = getenv_bootm_low();
- bootm_size = getenv_bootm_size();
-
-#ifdef DEBUG
- if (((u64)bootmap_base + bootm_size) >
- (CONFIG_SYS_SDRAM_BASE + (u64)gd->ram_size))
- puts("WARNING: bootm_low + bootm_size exceed total memory\n");
- if ((bootmap_base + bootm_size) > get_effective_memsize())
- puts("WARNING: bootm_low + bootm_size exceed eff. memory\n");
-#endif
-
- size = min(bootm_size, get_effective_memsize());
- size = min(size, CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
-
- if (size < bootm_size) {
- ulong base = bootmap_base + size;
- printf("WARNING: adjusting available memory to %lx\n", size);
- lmb_reserve(lmb, base, bootm_size - size);
- }
-
- /*
- * Booting a (Linux) kernel image
- *
- * Allocate space for command line and board info - the
- * address should be as high as possible within the reach of
- * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
- * memory, which means far enough below the current stack
- * pointer.
- */
- sp = get_sp();
- debug ("## Current stack ends at 0x%08lx\n", sp);
-
- /* adjust sp by 1K to be safe */
- sp -= 1024;
- lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp));
-
- return ;
-}
-
-static void boot_prep_linux(void)
-{
-#ifdef CONFIG_MP
- /* if we are MP make sure to flush the dcache() to any changes are made
- * visibile to all other cores */
- flush_dcache();
-#endif
- return ;
-}
-
-static int boot_cmdline_linux(bootm_headers_t *images)
-{
- ulong bootmap_base = getenv_bootm_low();
- ulong of_size = images->ft_len;
- struct lmb *lmb = &images->lmb;
- ulong *cmd_start = &images->cmdline_start;
- ulong *cmd_end = &images->cmdline_end;
-
- int ret = 0;
-
- if (!of_size) {
- /* allocate space and init command line */
- ret = boot_get_cmdline (lmb, cmd_start, cmd_end, bootmap_base);
- if (ret) {
- puts("ERROR with allocation of cmdline\n");
- return ret;
- }
- }
-
- return ret;
-}
-
-static int boot_bd_t_linux(bootm_headers_t *images)
-{
- ulong bootmap_base = getenv_bootm_low();
- ulong of_size = images->ft_len;
- struct lmb *lmb = &images->lmb;
- bd_t **kbd = &images->kbd;
-
- int ret = 0;
-
- if (!of_size) {
- /* allocate space for kernel copy of board info */
- ret = boot_get_kbd (lmb, kbd, bootmap_base);
- if (ret) {
- puts("ERROR with allocation of kernel bd\n");
- return ret;
- }
- set_clocks_in_mhz(*kbd);
- }
-
- return ret;
-}
-
-static int boot_body_linux(bootm_headers_t *images)
-{
- ulong rd_len;
- struct lmb *lmb = &images->lmb;
- ulong *initrd_start = &images->initrd_start;
- ulong *initrd_end = &images->initrd_end;
-#if defined(CONFIG_OF_LIBFDT)
- ulong bootmap_base = getenv_bootm_low();
- ulong of_size = images->ft_len;
- char **of_flat_tree = &images->ft_addr;
-#endif
-
- int ret;
-
- /* allocate space and init command line */
- ret = boot_cmdline_linux(images);
- if (ret)
- return ret;
-
- /* allocate space for kernel copy of board info */
- ret = boot_bd_t_linux(images);
- if (ret)
- return ret;
-
- rd_len = images->rd_end - images->rd_start;
- ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
- if (ret)
- return ret;
-
-#if defined(CONFIG_OF_LIBFDT)
- ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
- if (ret)
- return ret;
-
- /*
- * Add the chosen node if it doesn't exist, add the env and bd_t
- * if the user wants it (the logic is in the subroutines).
- */
- if (of_size) {
- if (fdt_chosen(*of_flat_tree, 1) < 0) {
- puts ("ERROR: ");
- puts ("/chosen node create failed");
- puts (" - must RESET the board to recover.\n");
- return -1;
- }
-#ifdef CONFIG_OF_BOARD_SETUP
- /* Call the board-specific fixup routine */
- ft_board_setup(*of_flat_tree, gd->bd);
-#endif
-
- /* Delete the old LMB reservation */
- lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
- (phys_size_t)fdt_totalsize(*of_flat_tree));
-
- ret = fdt_resize(*of_flat_tree);
- if (ret < 0)
- return ret;
- of_size = ret;
-
- if (*initrd_start && *initrd_end)
- of_size += FDT_RAMDISK_OVERHEAD;
- /* Create a new LMB reservation */
- lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
-
- /* fixup the initrd now that we know where it should be */
- if (*initrd_start && *initrd_end)
- fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
- }
-#endif /* CONFIG_OF_LIBFDT */
- return 0;
-}
-
-__attribute__((noinline))
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
- int ret;
-
- if (flag & BOOTM_STATE_OS_CMDLINE) {
- boot_cmdline_linux(images);
- return 0;
- }
-
- if (flag & BOOTM_STATE_OS_BD_T) {
- boot_bd_t_linux(images);
- return 0;
- }
-
- if (flag & BOOTM_STATE_OS_PREP) {
- boot_prep_linux();
- return 0;
- }
-
- if (flag & BOOTM_STATE_OS_GO) {
- boot_jump_linux(images);
- return 0;
- }
-
- boot_prep_linux();
- ret = boot_body_linux(images);
- if (ret)
- return ret;
- boot_jump_linux(images);
-
- return 0;
-}
-
-static ulong get_sp (void)
-{
- ulong sp;
-
- asm( "mr %0,1": "=r"(sp) : );
- return sp;
-}
-
-static void set_clocks_in_mhz (bd_t *kbd)
-{
- char *s;
-
- if ((s = getenv ("clocks_in_mhz")) != NULL) {
- /* convert all clock information to MHz */
- kbd->bi_intfreq /= 1000000L;
- kbd->bi_busfreq /= 1000000L;
-#if defined(CONFIG_MPC8220)
- kbd->bi_inpfreq /= 1000000L;
- kbd->bi_pcifreq /= 1000000L;
- kbd->bi_pevfreq /= 1000000L;
- kbd->bi_flbfreq /= 1000000L;
- kbd->bi_vcofreq /= 1000000L;
-#endif
-#if defined(CONFIG_CPM2)
- kbd->bi_cpmfreq /= 1000000L;
- kbd->bi_brgfreq /= 1000000L;
- kbd->bi_sccfreq /= 1000000L;
- kbd->bi_vco /= 1000000L;
-#endif
-#if defined(CONFIG_MPC5xxx)
- kbd->bi_ipbfreq /= 1000000L;
- kbd->bi_pcifreq /= 1000000L;
-#endif /* CONFIG_MPC5xxx */
- }
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/cache.h>
-#include <watchdog.h>
-
-void flush_cache(ulong start_addr, ulong size)
-{
-#ifndef CONFIG_5xx
- ulong addr, start, end;
-
- start = start_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1);
- end = start_addr + size - 1;
-
- for (addr = start; (addr <= end) && (addr >= start);
- addr += CONFIG_SYS_CACHELINE_SIZE) {
- asm volatile("dcbst 0,%0" : : "r" (addr) : "memory");
- WATCHDOG_RESET();
- }
- /* wait for all dcbst to complete on bus */
- asm volatile("sync" : : : "memory");
-
- for (addr = start; (addr <= end) && (addr >= start);
- addr += CONFIG_SYS_CACHELINE_SIZE) {
- asm volatile("icbi 0,%0" : : "r" (addr) : "memory");
- WATCHDOG_RESET();
- }
- asm volatile("sync" : : : "memory");
- /* flush prefetch queue */
- asm volatile("isync" : : : "memory");
-#endif
-}
+++ /dev/null
-/*
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-extern const struct exception_table_entry __start___ex_table[];
-extern const struct exception_table_entry __stop___ex_table[];
-
-static inline unsigned long
-search_one_table(const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
-{
- long diff;
- while (first <= last) {
- diff = first->insn - value;
- if (diff == 0)
- return first->fixup;
- first++;
- }
-
- return 0;
-}
-
-int ex_tab_message = 1;
-
-unsigned long
-search_exception_table(unsigned long addr)
-{
- unsigned long ret;
-
- /* There is only the kernel to search. */
- ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
- /* if the serial port does not hang in exception, printf can be used */
-#if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION)
- if (ex_tab_message)
- debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
-#endif
- if (ret) return ret;
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <watchdog.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-#ifdef CONFIG_SHOW_ACTIVITY
-void board_show_activity (ulong) __attribute__((weak, alias("__board_show_activity")));
-
-void __board_show_activity (ulong dummy)
-{
- return;
-}
-#endif /* CONFIG_SHOW_ACTIVITY */
-
-#ifndef CONFIG_SYS_WATCHDOG_FREQ
-#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 2)
-#endif
-
-extern int interrupt_init_cpu (unsigned *);
-extern void timer_interrupt_cpu (struct pt_regs *);
-
-static unsigned decrementer_count; /* count value for 1e6/HZ microseconds */
-
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
-
- asm volatile ("mfmsr %0":"=r" (msr):);
-
- return msr;
-}
-
-static __inline__ void set_msr (unsigned long msr)
-{
- asm volatile ("mtmsr %0"::"r" (msr));
-}
-
-static __inline__ unsigned long get_dec (void)
-{
- unsigned long val;
-
- asm volatile ("mfdec %0":"=r" (val):);
-
- return val;
-}
-
-
-static __inline__ void set_dec (unsigned long val)
-{
- if (val)
- asm volatile ("mtdec %0"::"r" (val));
-}
-
-
-void enable_interrupts (void)
-{
- set_msr (get_msr () | MSR_EE);
-}
-
-/* returns flag if MSR_EE was set before */
-int disable_interrupts (void)
-{
- ulong msr = get_msr ();
-
- set_msr (msr & ~MSR_EE);
- return ((msr & MSR_EE) != 0);
-}
-
-int interrupt_init (void)
-{
- int ret;
-
- /* call cpu specific function from $(CPU)/interrupts.c */
- ret = interrupt_init_cpu (&decrementer_count);
-
- if (ret)
- return ret;
-
- set_dec (decrementer_count);
-
- set_msr (get_msr () | MSR_EE);
-
- return (0);
-}
-
-static volatile ulong timestamp = 0;
-
-void timer_interrupt (struct pt_regs *regs)
-{
- /* call cpu specific function from $(CPU)/interrupts.c */
- timer_interrupt_cpu (regs);
-
- /* Restore Decrementer Count */
- set_dec (decrementer_count);
-
- timestamp++;
-
-#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
- if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
- WATCHDOG_RESET ();
-#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
-
-#ifdef CONFIG_STATUS_LED
- status_led_tick (timestamp);
-#endif /* CONFIG_STATUS_LED */
-
-#ifdef CONFIG_SHOW_ACTIVITY
- board_show_activity (timestamp);
-#endif /* CONFIG_SHOW_ACTIVITY */
-}
-
-void reset_timer (void)
-{
- timestamp = 0;
-}
-
-ulong get_timer (ulong base)
-{
- return (timestamp - base);
-}
-
-void set_timer (ulong t)
-{
- timestamp = t;
-}
+++ /dev/null
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/signal.h>
-#include <asm/processor.h>
-
-#define PC_REGNUM 64
-#define SP_REGNUM 1
-
-void breakinst(void);
-
-int
-kgdb_setjmp(long *buf)
-{
- asm ("mflr 0; stw 0,0(%0);"
- "stw 1,4(%0); stw 2,8(%0);"
- "mfcr 0; stw 0,12(%0);"
- "stmw 13,16(%0)"
- : : "r" (buf));
- /* XXX should save fp regs as well */
- return 0;
-}
-
-void
-kgdb_longjmp(long *buf, int val)
-{
- if (val == 0)
- val = 1;
- asm ("lmw 13,16(%0);"
- "lwz 0,12(%0); mtcrf 0x38,0;"
- "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
- "mtlr 0; mr 3,%1"
- : : "r" (buf), "r" (val));
-}
-
-static inline unsigned long
-get_msr(void)
-{
- unsigned long msr;
- asm volatile("mfmsr %0" : "=r" (msr):);
- return msr;
-}
-
-static inline void
-set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-/* Convert the SPARC hardware trap type code to a unix signal number. */
-/*
- * This table contains the mapping between PowerPC hardware trap types, and
- * signals, which are primarily what GDB understands.
- */
-static struct hard_trap_info
-{
- unsigned int tt; /* Trap type code for powerpc */
- unsigned char signo; /* Signal that we map this trap into */
-} hard_trap_info[] = {
- { 0x200, SIGSEGV }, /* machine check */
- { 0x300, SIGSEGV }, /* address error (store) */
- { 0x400, SIGBUS }, /* instruction bus error */
- { 0x500, SIGINT }, /* interrupt */
- { 0x600, SIGBUS }, /* alingment */
- { 0x700, SIGTRAP }, /* breakpoint trap */
- { 0x800, SIGFPE }, /* fpu unavail */
- { 0x900, SIGALRM }, /* decrementer */
- { 0xa00, SIGILL }, /* reserved */
- { 0xb00, SIGILL }, /* reserved */
- { 0xc00, SIGCHLD }, /* syscall */
- { 0xd00, SIGTRAP }, /* single-step/watch */
- { 0xe00, SIGFPE }, /* fp assist */
- { 0, 0} /* Must be last */
-};
-
-static int
-computeSignal(unsigned int tt)
-{
- struct hard_trap_info *ht;
-
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- if (ht->tt == tt)
- return ht->signo;
-
- return SIGHUP; /* default for things we don't know about */
-}
-
-void
-kgdb_enter(struct pt_regs *regs, kgdb_data *kdp)
-{
- unsigned long msr;
-
- kdp->private[0] = msr = get_msr();
- set_msr(msr & ~MSR_EE); /* disable interrupts */
-
- if (regs->nip == (unsigned long)breakinst) {
- /* Skip over breakpoint trap insn */
- regs->nip += 4;
- }
- regs->msr &= ~MSR_SE;
-
- /* reply to host that an exception has occurred */
- kdp->sigval = computeSignal(regs->trap);
-
- kdp->nregs = 2;
-
- kdp->regs[0].num = PC_REGNUM;
- kdp->regs[0].val = regs->nip;
-
- kdp->regs[1].num = SP_REGNUM;
- kdp->regs[1].val = regs->gpr[SP_REGNUM];
-}
-
-void
-kgdb_exit(struct pt_regs *regs, kgdb_data *kdp)
-{
- unsigned long msr = kdp->private[0];
-
- if (kdp->extype & KGDBEXIT_WITHADDR)
- regs->nip = kdp->exaddr;
-
- switch (kdp->extype & KGDBEXIT_TYPEMASK) {
-
- case KGDBEXIT_KILL:
- case KGDBEXIT_CONTINUE:
- set_msr(msr);
- break;
-
- case KGDBEXIT_SINGLE:
- regs->msr |= MSR_SE;
-#if 0
- set_msr(msr | MSR_SE);
-#endif
- break;
- }
-}
-
-int
-kgdb_trap(struct pt_regs *regs)
-{
- return (regs->trap);
-}
-
-/* return the value of the CPU registers.
- * some of them are non-PowerPC names :(
- * they are stored in gdb like:
- * struct {
- * u32 gpr[32];
- * f64 fpr[32];
- * u32 pc, ps, cnd, lr; (ps=msr)
- * u32 cnt, xer, mq;
- * }
- */
-
-#define SPACE_REQUIRED ((32*4)+(32*8)+(6*4))
-
-#ifdef CONFIG_8260
-/* store floating double indexed */
-#define STFDI(n,p) __asm__ __volatile__ ("stfd " #n ",%0" : "=o"(p[2*n]))
-/* store floating double multiple */
-#define STFDM(p) { STFDI( 0,p); STFDI( 1,p); STFDI( 2,p); STFDI( 3,p); \
- STFDI( 4,p); STFDI( 5,p); STFDI( 6,p); STFDI( 7,p); \
- STFDI( 8,p); STFDI( 9,p); STFDI(10,p); STFDI(11,p); \
- STFDI(12,p); STFDI(13,p); STFDI(14,p); STFDI(15,p); \
- STFDI(16,p); STFDI(17,p); STFDI(18,p); STFDI(19,p); \
- STFDI(20,p); STFDI(21,p); STFDI(22,p); STFDI(23,p); \
- STFDI(24,p); STFDI(25,p); STFDI(26,p); STFDI(27,p); \
- STFDI(28,p); STFDI(29,p); STFDI(30,p); STFDI(31,p); }
-#endif
-
-int
-kgdb_getregs(struct pt_regs *regs, char *buf, int max)
-{
- int i;
- unsigned long *ptr = (unsigned long *)buf;
-
- if (max < SPACE_REQUIRED)
- kgdb_error(KGDBERR_NOSPACE);
-
- if ((unsigned long)ptr & 3)
- kgdb_error(KGDBERR_ALIGNFAULT);
-
- /* General Purpose Regs */
- for (i = 0; i < 32; i++)
- *ptr++ = regs->gpr[i];
-
- /* Floating Point Regs */
-#ifdef CONFIG_8260
- STFDM(ptr);
- ptr += 32*2;
-#else
- for (i = 0; i < 32; i++) {
- *ptr++ = 0;
- *ptr++ = 0;
- }
-#endif
-
- /* pc, msr, cr, lr, ctr, xer, (mq is unused) */
- *ptr++ = regs->nip;
- *ptr++ = regs->msr;
- *ptr++ = regs->ccr;
- *ptr++ = regs->link;
- *ptr++ = regs->ctr;
- *ptr++ = regs->xer;
-
- return (SPACE_REQUIRED);
-}
-
-/* set the value of the CPU registers */
-
-#ifdef CONFIG_8260
-/* load floating double */
-#define LFD(n,v) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"(v))
-/* load floating double indexed */
-#define LFDI(n,p) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"((p)[2*n]))
-/* load floating double multiple */
-#define LFDM(p) { LFDI( 0,p); LFDI( 1,p); LFDI( 2,p); LFDI( 3,p); \
- LFDI( 4,p); LFDI( 5,p); LFDI( 6,p); LFDI( 7,p); \
- LFDI( 8,p); LFDI( 9,p); LFDI(10,p); LFDI(11,p); \
- LFDI(12,p); LFDI(13,p); LFDI(14,p); LFDI(15,p); \
- LFDI(16,p); LFDI(17,p); LFDI(18,p); LFDI(19,p); \
- LFDI(20,p); LFDI(21,p); LFDI(22,p); LFDI(23,p); \
- LFDI(24,p); LFDI(25,p); LFDI(26,p); LFDI(27,p); \
- LFDI(28,p); LFDI(29,p); LFDI(30,p); LFDI(31,p); }
-#endif
-
-void
-kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length)
-{
- unsigned long *ptr = (unsigned long *)buf;
-
- if (regno < 0 || regno >= 70)
- kgdb_error(KGDBERR_BADPARAMS);
- else if (regno >= 32 && regno < 64) {
- if (length < 8)
- kgdb_error(KGDBERR_NOSPACE);
- }
- else {
- if (length < 4)
- kgdb_error(KGDBERR_NOSPACE);
- }
-
- if ((unsigned long)ptr & 3)
- kgdb_error(KGDBERR_ALIGNFAULT);
-
- if (regno >= 0 && regno < 32)
- regs->gpr[regno] = *ptr;
- else switch (regno) {
-
-#ifdef CONFIG_8260
-#define caseF(n) \
- case (n) + 32: LFD(n, *ptr); break;
-
-caseF( 0) caseF( 1) caseF( 2) caseF( 3) caseF( 4) caseF( 5) caseF( 6) caseF( 7)
-caseF( 8) caseF( 9) caseF(10) caseF(11) caseF(12) caseF(13) caseF(14) caseF(15)
-caseF(16) caseF(17) caseF(18) caseF(19) caseF(20) caseF(21) caseF(22) caseF(23)
-caseF(24) caseF(25) caseF(26) caseF(27) caseF(28) caseF(29) caseF(30) caseF(31)
-
-#undef caseF
-#endif
-
- case 64: regs->nip = *ptr; break;
- case 65: regs->msr = *ptr; break;
- case 66: regs->ccr = *ptr; break;
- case 67: regs->link = *ptr; break;
- case 68: regs->ctr = *ptr; break;
- case 69: regs->ctr = *ptr; break;
-
- default:
- kgdb_error(KGDBERR_BADPARAMS);
- }
-}
-
-void
-kgdb_putregs(struct pt_regs *regs, char *buf, int length)
-{
- int i;
- unsigned long *ptr = (unsigned long *)buf;
-
- if (length < SPACE_REQUIRED)
- kgdb_error(KGDBERR_NOSPACE);
-
- if ((unsigned long)ptr & 3)
- kgdb_error(KGDBERR_ALIGNFAULT);
-
- /*
- * If the stack pointer has moved, you should pray.
- * (cause only god can help you).
- */
-
- /* General Purpose Regs */
- for (i = 0; i < 32; i++)
- regs->gpr[i] = *ptr++;
-
- /* Floating Point Regs */
-#ifdef CONFIG_8260
- LFDM(ptr);
-#endif
- ptr += 32*2;
-
- /* pc, msr, cr, lr, ctr, xer, (mq is unused) */
- regs->nip = *ptr++;
- regs->msr = *ptr++;
- regs->ccr = *ptr++;
- regs->link = *ptr++;
- regs->ctr = *ptr++;
- regs->xer = *ptr++;
-}
-
-/* This function will generate a breakpoint exception. It is used at the
- beginning of a program to sync up with a debugger and can be used
- otherwise as a quick means to stop program execution and "break" into
- the debugger. */
-
-void
-kgdb_breakpoint(int argc, char *argv[])
-{
- asm(" .globl breakinst\n\
- breakinst: .long 0x7d821008\n\
- ");
-}
+++ /dev/null
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcDcbf */
-/* Description: Data Cache block flush */
-/* Input: r3 = effective address */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcDcbf
-ppcDcbf:
- dcbf r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcDcbi */
-/* Description: Data Cache block Invalidate */
-/* Input: r3 = effective address */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcDcbi
-ppcDcbi:
- dcbi r0,r3
- blr
-
-/*--------------------------------------------------------------------------
- * Function: ppcDcbz
- * Description: Data Cache block zero.
- * Input: r3 = effective address
- * Output: none.
- *-------------------------------------------------------------------------- */
-
- .globl ppcDcbz
-ppcDcbz:
- dcbz r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcSync */
-/* Description: Processor Synchronize */
-/* Input: none. */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcSync
-ppcSync:
- sync
- blr
+++ /dev/null
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <ppc_asm.tmpl>
-#include <asm/errno.h>
-
- .globl strcpy
-strcpy:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r5)
- bne 1b
- blr
-
- .globl strncpy
-strncpy:
- cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r6,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r6)
- bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
- blr
-
- .globl strcat
-strcat:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r0,1(r5)
- cmpwi 0,r0,0
- bne 1b
- addi r5,r5,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- stbu r0,1(r5)
- bne 1b
- blr
-
- .globl strcmp
-strcmp:
- addi r5,r3,-1
- addi r4,r4,-1
-1: lbzu r3,1(r5)
- cmpwi 1,r3,0
- lbzu r0,1(r4)
- subf. r3,r0,r3
- beqlr 1
- beq 1b
- blr
-
- .globl strlen
-strlen:
- addi r4,r3,-1
-1: lbzu r0,1(r4)
- cmpwi 0,r0,0
- bne 1b
- subf r3,r3,r4
- blr
-
- .globl memset
-memset:
- rlwimi r4,r4,8,16,23
- rlwimi r4,r4,16,0,15
- addi r6,r3,-4
- cmplwi 0,r5,4
- blt 7f
- stwu r4,4(r6)
- beqlr
- andi. r0,r6,3
- add r5,r0,r5
- subf r6,r0,r6
- rlwinm r0,r5,32-2,2,31
- mtctr r0
- bdz 6f
-1: stwu r4,4(r6)
- bdnz 1b
-6: andi. r5,r5,3
-7: cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r6,r6,3
-8: stbu r4,1(r6)
- bdnz 8b
- blr
-
- .globl bcopy
-bcopy:
- mr r6,r3
- mr r3,r4
- mr r4,r6
- b memcpy
-
- .globl memmove
-memmove:
- cmplw 0,r3,r4
- bgt backwards_memcpy
- /* fall through */
-
- .globl memcpy
-memcpy:
- rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
- addi r6,r3,-4
- addi r4,r4,-4
- beq 2f /* if less than 8 bytes to do */
- andi. r0,r6,3 /* get dest word aligned */
- mtctr r7
- bne 5f
-1: lwz r7,4(r4)
- lwzu r8,8(r4)
- stw r7,4(r6)
- stwu r8,8(r6)
- bdnz 1b
- andi. r5,r5,7
-2: cmplwi 0,r5,4
- blt 3f
- lwzu r0,4(r4)
- addi r5,r5,-4
- stwu r0,4(r6)
-3: cmpwi 0,r5,0
- beqlr
- mtctr r5
- addi r4,r4,3
- addi r6,r6,3
-4: lbzu r0,1(r4)
- stbu r0,1(r6)
- bdnz 4b
- blr
-5: subfic r0,r0,4
- mtctr r0
-6: lbz r7,4(r4)
- addi r4,r4,1
- stb r7,4(r6)
- addi r6,r6,1
- bdnz 6b
- subf r5,r0,r5
- rlwinm. r7,r5,32-3,3,31
- beq 2b
- mtctr r7
- b 1b
-
- .globl backwards_memcpy
-backwards_memcpy:
- rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
- add r6,r3,r5
- add r4,r4,r5
- beq 2f
- andi. r0,r6,3
- mtctr r7
- bne 5f
-1: lwz r7,-4(r4)
- lwzu r8,-8(r4)
- stw r7,-4(r6)
- stwu r8,-8(r6)
- bdnz 1b
- andi. r5,r5,7
-2: cmplwi 0,r5,4
- blt 3f
- lwzu r0,-4(r4)
- subi r5,r5,4
- stwu r0,-4(r6)
-3: cmpwi 0,r5,0
- beqlr
- mtctr r5
-4: lbzu r0,-1(r4)
- stbu r0,-1(r6)
- bdnz 4b
- blr
-5: mtctr r0
-6: lbzu r7,-1(r4)
- stbu r7,-1(r6)
- bdnz 6b
- subf r5,r0,r5
- rlwinm. r7,r5,32-3,3,31
- beq 2b
- mtctr r7
- b 1b
-
- .globl memcmp
-memcmp:
- cmpwi 0,r5,0
- ble- 2f
- mtctr r5
- addi r6,r3,-1
- addi r4,r4,-1
-1: lbzu r3,1(r6)
- lbzu r0,1(r4)
- subf. r3,r0,r3
- bdnzt 2,1b
- blr
-2: li r3,0
- blr
-
- .global memchr
-memchr:
- cmpwi 0,r5,0
- ble- 2f
- mtctr r5
- addi r3,r3,-1
-1: lbzu r0,1(r3)
- cmpw 0,r0,r4
- bdnzf 2,1b
- beqlr
-2: li r3,0
- blr
+++ /dev/null
-/*
- * Copyright (C) 2009 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-
- .file "reloc.S"
-
- .text
-#ifndef CONFIG_NAND_SPL
- /*
- * Function: relocate entries for one exception vector
- */
- .globl trap_reloc
- .type trap_reloc, @function
-trap_reloc:
- lwz r0, 0(r7) /* hdlr ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 0(r7)
-
- lwz r0, 4(r7) /* int_return ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 4(r7)
-
- lwz r0, 8(r7) /* transfer_to_handler ...*/
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 8(r7)
-
- blr
- .size trap_reloc, .-trap_reloc
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- * base on code by
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <config.h>
-#include <watchdog.h>
-
-/*
- * unsigned long long get_ticks(void);
- *
- * read timebase as "long long"
- */
- .globl get_ticks
-get_ticks:
-1: mftbu r3
- mftb r4
- mftbu r5
- cmp 0,r3,r5
- bne 1b
- blr
-
-/*
- * Delay for a number of ticks
- */
- .globl wait_ticks
-wait_ticks:
- mflr r8 /* save link register */
- mr r7, r3 /* save tick count */
- bl get_ticks /* Get start time */
-
- /* Calculate end time */
- addc r7, r4, r7 /* Compute end time lower */
- addze r6, r3 /* and end time upper */
-
- WATCHDOG_RESET /* Trigger watchdog, if needed */
-1: bl get_ticks /* Get current time */
- subfc r4, r4, r7 /* Subtract current time from end time */
- subfe. r3, r3, r6
- bge 1b /* Loop until time expired */
-
- mtlr r8 /* restore link register */
- blr
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * This function is intended for SHORT delays only.
- * It will overflow at around 10 seconds @ 400MHz,
- * or 20 seconds @ 200MHz.
- */
-unsigned long usec2ticks(unsigned long usec)
-{
- ulong ticks;
-
- if (usec < 1000) {
- ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
- } else {
- ticks = ((usec / 10) * (get_tbclk() / 100000));
- }
-
- return (ticks);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * We implement the delay by converting the delay (the number of
- * microseconds to wait) into a number of time base ticks; then we
- * watch the time base until it has incremented by that amount.
- */
-void __udelay(unsigned long usec)
-{
- ulong ticks = usec2ticks (usec);
- wait_ticks (ticks);
-}
-
-/* ------------------------------------------------------------------------- */
-#ifndef CONFIG_NAND_SPL
-unsigned long ticks2usec(unsigned long ticks)
-{
- ulong tbclk = get_tbclk();
-
- /* usec = ticks * 1000000 / tbclk
- * Multiplication would overflow at ~4.2e3 ticks,
- * so we break it up into
- * usec = ( ( ticks * 1000) / tbclk ) * 1000;
- */
- ticks *= 1000L;
- ticks /= tbclk;
- ticks *= 1000L;
-
- return ((ulong)ticks);
-}
-#endif
-/* ------------------------------------------------------------------------- */
-
-int init_timebase (void)
-{
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* unlock */
- immap->im_sitk.sitk_tbk = KAPWR_KEY;
-#endif
-
- /* reset */
- asm ("li 3,0 ; mttbu 3 ; mttbl 3 ;");
-
-#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
- /* enable */
- immap->im_sit.sit_tbscr |= TBSCR_TBE;
-#endif
- return (0);
-}
-/* ------------------------------------------------------------------------- */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
lib/string.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/extable.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/extable.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
. = env_offset;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
common/env_embedded.o(.text)
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*
* further modified by Josh Huber <huber@mclx.com> to support
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
* modified slightly to
* have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * arch/powerpc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o (.ppcenv)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
#define BOARD_ARCHES 4
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
#if defined(CONFIG_ARCHES)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x20000);
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_wrdtr(u32 default_val) {
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_clktr(u32 default_val) {
extern void denali_core_search_data_eye(void);
#if defined(CONFIG_NAND_SPL)
-/* Using arch/ppc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+/* Using arch/powerpc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big
* for the 4k NAND boot image so define bus_frequency to 133MHz here
* which is save for the refresh counter setup.
*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
*(.text)
*(.got1)
}
/*
- * Override the default functions in arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c with
+ * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
static int ppc440spe_rev_a(void)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/amirix/ap1000/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
* modified slightly to
* have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/serial.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/speed.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/serial.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/cpu.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/speed.o (.text)
- arch/ppc/cpu/mpc8xx/serial.o (.text)
- arch/ppc/lib/extable.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/speed.o (.text)
+ arch/powerpc/cpu/mpc8xx/serial.o (.text)
+ arch/powerpc/lib/extable.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/string.o (.text)
lib/crc32.o (.text)
common/dlmalloc.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*. = DEFINED(env_offset) ? env_offset : .;*/
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
* We will over-ride the env_init called in board_init_f
* This is really a work-around because, the HLP bank 1
* where NVRAM resides is not visible during board_init_f
- * (arch/ppc/lib/board.c)
+ * (arch/powerpc/lib/board.c)
* Alternatively, we could use the I2C EEPROM at start-up to configure
* and enable all HLP banks and not just HLP 0 as is being done for
* Taiga Rev. 2.
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
drivers/bios_emulator/atibios.o (.text)
*(.text)
/*
* Configure the MPC8XX I/O ports per the ioport configuration table
- * (taken from ./arch/ppc/cpu/mpc8260/cpu_init.c)
+ * (taken from ./arch/powerpc/cpu/mpc8260/cpu_init.c)
*/
void config_mpc8xx_ioports (volatile immap_t * immr)
{
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o(.text)
*(.text)
common/env_embedded.o(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
- arch/ppc/lib/cache.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
+ arch/powerpc/lib/cache.o (.text)
lib/crc32.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
. = env_offset;
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8260/start.o (.text)
+ arch/powerpc/cpu/mpc8260/start.o (.text)
/*
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
/**
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
- arch/ppc/lib/ticks.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
+ arch/powerpc/lib/ticks.o (.text)
/**
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
#endif
/*
- * This function is also called by arch/ppc/lib/board.c:board_init_f (it is
+ * This function is also called by arch/powerpc/lib/board.c:board_init_f (it is
* also in the init_sequence array) but later. Many more things are
* configured, but we are still running from flash.
*/
/* **** No more functions called by board_init_f. **** */
/*
- * This function is called by arch/ppc/lib/board.c:board_init_r. At this
+ * This function is called by arch/powerpc/lib/board.c:board_init_r. At this
* point, basic setup is done, U-Boot has been moved into SDRAM and
* PCI has been set up. From here we done late setup.
*/
/*
* this is even after checkboard. It returns the size of the SDRAM
* that we have installed. This function is called by board_init_f
- * in arch/ppc/lib/board.c to initialize the memory and return what I
+ * in arch/powerpc/lib/board.c to initialize the memory and return what I
* found.
*/
phys_size_t initdram (int board_type)
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8260/ether_scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8xx/scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8xx/scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
- * Based in part on arch/ppc/cpu/mpc8260/ether_scc.c.
+ * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
*
* See file CREDITS for list of people who contributed to this
* project.
.bootpg 0xF7FBF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
/*
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * This file was adapted from arch/ppc/cpu/mpc5xxx/serial.c
+ * This file was adapted from arch/powerpc/cpu/mpc5xxx/serial.c
*
*/
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
{
/* WARNING - the following is hand-optimized to fit within */
/* the first two sectors (=8KB) of our S29GL flash chip */
- cpu/mpc5xxx/start.o (.text)
- cpu/mpc5xxx/traps.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/cache.o (.text)
- lib_ppc/time.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text)
+ lib/crc32.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
/* This is only needed to force failure if size of above code will ever */
/* increase and grow into reserved space. */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
- * Code in faintly related to linux/arch/ppc/8xx_io:
+ * Code in faintly related to linux/arch/powerpc/8xx_io:
* MPC8xx CPM I2C interface. Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
*
* This file implements functions to read the MBX's Vital Product Data
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/ml2/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc824x/start.o (.text)
- arch/ppc/lib/board.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/lib/board.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
PROVIDE(_f_init_rom = .);
.init : {
- arch/ppc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
*(.init)
} > ram
_init_size = SIZEOF(.init);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc824x/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text)
common/board.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc5xxx/start.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
*(.text)
*(.got1)
. = ALIGN(16);
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
*(.text)
*(.got1)
}
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
Startup sequence
----------------
-(arch/ppc/cpu/ppc4xx/resetvec.S)
+(arch/powerpc/cpu/ppc4xx/resetvec.S)
depending on configs option
call _start_440 _start_pci oder _start
-(arch/ppc/cpu/ppc4xx/start.S)
+(arch/powerpc/cpu/ppc4xx/start.S)
_start_440:
initialize register like
call cpu_init_f /* run low-level CPU init code (from Flash) */
call cpu_init_f
- board_init_f: (arch/ppc/lib\board.c)
+ board_init_f: (arch/powerpc/lib\board.c)
init_sequence defines a list of function to be called
board_early_init_f: (board/netstal/hcu5/hcu5.c)
We are using Bootstrap-Option A
* - board info struct
Save local variables to board info struct
call relocate_code() does not return
- relocate_code: (arch/ppc/cpu/ppc4xx/start.S)
+ relocate_code: (arch/powerpc/cpu/ppc4xx/start.S)
-------------------------------------------------------
From now on our copy is in RAM and we will run from there,
starting with board_init_r
-------------------------------------------------------
- board_init_r: (arch/ppc/lib\board.c)
+ board_init_r: (arch/powerpc/lib\board.c)
setup bd function pointers
trap_init
flash_init: (board/netstal/hcu5/flash.c)
/* setup for u-boot erase, update */
setup bd flash info
- cpu_init_r: (arch/ppc/cpu/ppc4xx/cpu_init.c)
+ cpu_init_r: (arch/powerpc/cpu/ppc4xx/cpu_init.c)
peripheral chip select in using defines like
CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h
mem_malloc_init
Most of the HW specific code for the HCU5 may be found in
include/configs/hcu5.h
board/netstal/hcu5/*
-arch/ppc/cpu/ppc4xx/*
-arch/ppc/lib/*
+arch/powerpc/cpu/ppc4xx/*
+arch/powerpc/lib/*
include/ppc440.h
Drivers for serial etc are found under drivers/
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
/*
* This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/ppc/lib/board.c:board_init_f by virtue
+ * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */
/*--------------------------------------------------------------------
- * GPIO's are alreay setup in arch/ppc/cpu/ppc4xx/cpu_init.c
+ * GPIO's are alreay setup in arch/powerpc/cpu/ppc4xx/cpu_init.c
* via define from board config file.
*-------------------------------------------------------------------*/
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
*************************************************************************/
/*
* based on Linux code
- * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
+ * arch/powerpc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports
* Copyright (C) 2002 rabeeh@galileo.co.il
* This program is free software; you can redistribute it and/or
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/74xx_7xx/start.o (.text)
/* store the environment in a seperate sector in the boot flash */
/* . = env_offset; */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
/***
. = env_offset;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8260/start.o (.text)
+ arch/powerpc/cpu/mpc8260/start.o (.text)
*(.text)
*(.got1)
/*. = env_offset; */
*/
/*
- * Ported from arch/ppc/cpu/ppc4xx/i2c.c by AS HARNOIS by
+ * Ported from arch/powerpc/cpu/ppc4xx/i2c.c by AS HARNOIS by
* Travis B. Sawyer
* Sandburst Corporation.
*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sandburst/karef/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
drivers/net/4xx_enet.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sandburst/metrobox/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
drivers/net/4xx_enet.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/sc3/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* . = env_offset;*/
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
- arch/ppc/cpu/mpc8xx/interrupts.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
+ arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
#endif
/* Why is the phy reset done _after_ the ethernet
- * initialization in arch/ppc/lib/board.c?
+ * initialization in arch/powerpc/lib/board.c?
* Do it here so it's done before the TSECs are used.
*/
reset_phy();
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
. = env_offset;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
+ arch/powerpc/lib/cache.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
common/env_embedded.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/mpc5xxx/u-boot-customlayout.lds
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
- arch/ppc/cpu/mpc8xx/traps.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
+ arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/lib/time.o (.text)
/*
. = env_offset;
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
common/env_embedded.o(.text)
/*
* ToDo: Move the asm init routine sdram_init() to this C file,
* or even better use some common ppc4xx code available
- * in arch/ppc/cpu/ppc4xx
+ * in arch/powerpc/cpu/ppc4xx
*/
sdram_init();
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
- arch/ppc/lib/ppcstring.o (.text)
+ arch/powerpc/lib/ppcstring.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
lib/zlib.o (.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib/vsprintf.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
. = env_offset;
common/env_embedded.o(.text)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/ppc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
board/xes/xpedite1000/init.o (.text)
- arch/ppc/cpu/ppc4xx/kgdb.o (.text)
- arch/ppc/cpu/ppc4xx/traps.o (.text)
- arch/ppc/cpu/ppc4xx/interrupts.o (.text)
- arch/ppc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/ppc/cpu/ppc4xx/cpu_init.o (.text)
- arch/ppc/cpu/ppc4xx/speed.o (.text)
+ arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
+ arch/powerpc/cpu/ppc4xx/traps.o (.text)
+ arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
+ arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
+ arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
+ arch/powerpc/cpu/ppc4xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
/* common/env_embedded.o(.text) */
.plt : { *(.plt) }
.text :
{
- arch/ppc/cpu/mpc86xx/start.o (.text)
- arch/ppc/cpu/mpc86xx/traps.o (.text)
- arch/ppc/cpu/mpc86xx/interrupts.o (.text)
- arch/ppc/cpu/mpc86xx/cpu_init.o (.text)
- arch/ppc/cpu/mpc86xx/cpu.o (.text)
- arch/ppc/cpu/mpc86xx/speed.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text)
+ arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
+ arch/powerpc/cpu/mpc86xx/cpu.o (.text)
+ arch/powerpc/cpu/mpc86xx/speed.o (.text)
common/dlmalloc.o (.text)
lib/crc32.o (.text)
- arch/ppc/lib/extable.o (.text)
+ arch/powerpc/lib/extable.o (.text)
lib/zlib.o (.text)
*(.text)
*(.got1)
.bootpg 0xFFFFF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
.bootpg 0xFFFFF000 :
{
- arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+ arch/powerpc/cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
-/* taken from arch/ppc/kernel/ppc-stub.c */
+/* taken from arch/powerpc/kernel/ppc-stub.c */
/****************************************************************************
$ make oldconfig
$ make dep
$ make uImage
- $ cp -p arch/ppc/mbxboot/uImage /tftpboot
+ $ cp -p arch/powerpc/mbxboot/uImage /tftpboot
Load uImage via tftp and boot it.
added console settings from environment
- common/devices.c added ISA keyboard init
- common/main.c corrected the read of bootdelay
-- arch/ppc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
-- arch/ppc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
+- arch/powerpc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
+- arch/powerpc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
added page write
-- arch/ppc/cpu/ppc4xx/speed.c added get_PCI_freq
-- arch/ppc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
+- arch/powerpc/cpu/ppc4xx/speed.c added get_PCI_freq
+- arch/powerpc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
- disk/Makefile added part_iso for CD support
- disk/part.c changed to work with block device description
added ISO CD support
"U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
and custom versions.
Changed files:
-- arch/ppc/cpu/ppc4xx/start.s
+- arch/powerpc/cpu/ppc4xx/start.s
Firmware Image:
---------------
Correct PCI Frequency for PPC405:
---------------------------------
-Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
The PCI Frequency will now be set correct in the board description in common/board.c.
(was set to the busfreq before).
Changed files:
-- arch/ppc/cpu/ppc4xx/speed.c
+- arch/powerpc/cpu/ppc4xx/speed.c
- common/board.c
I2C Stuff:
Added 16bit read/write support for I2C (PPC405), and page write to
I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
Changed files:
-- arch/ppc/cpu/ppc4xx/i2c.c
+- arch/powerpc/cpu/ppc4xx/i2c.c
- common/cmd_i2c.c
Environment / Console:
reconfiguration of the physical interface chip.
The test routines for the SCC ethernet tests will be located in
-arch/ppc/cpu/mpc8xx/scc.c.
+arch/powerpc/cpu/mpc8xx/scc.c.
2.2.3.2. UART tests (SMC/SCC)
test will be executed manually.
The test routine for the SMC/SCC UART tests will be located in
-arch/ppc/cpu/mpc8xx/serial.c.
+arch/powerpc/cpu/mpc8xx/serial.c.
2.2.3.3. USB test
board/RPXLITE/RPXLITE.c /* DRAM-related routines */
board/RPXLITE/flash.c /* flash-related routines */
board/RPXLITE/config.mk /* set text base address */
- arch/ppc/cpu/mpc8xx/serial.c /* board specific register setting */
+ arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
include/config_RPXLITE.h /* board specific registers */
See 'reg_config.txt' for register values in detail.
MAKEALL - TQM8260 entry added
Makefile - TQM8260_config entry added
-arch/ppc/cpu/mpc8260/Makefile - soft_i2c.o module added
-arch/ppc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
+arch/powerpc/cpu/mpc8260/Makefile - soft_i2c.o module added
+arch/powerpc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
bug fixed (fcr -> scr)
-arch/ppc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
+arch/powerpc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
include/flash.h - added definitions for the AM29LV640D Flash chip
board/tqm8260/flash.c - flash driver (for AM29LV640D)
board/tqm8260/ppcboot.lds - linker script
board/tqm8260/tqm8260.c - ioport and memory initialization
-arch/ppc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
+arch/powerpc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
include/config_TQM8260.h - main configuration file
- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
vco_clk, pev_clk, flb_clk, and bExtUart
-- arch/ppc/lib/board.c added CONFIG_MPC8220 support
+- arch/powerpc/lib/board.c added CONFIG_MPC8220 support
- net/eth.c added FEC support for MPC8220
- board/alaska/config.mk config make
- board/alaska/u-boot.lds Linker description
-- arch/ppc/cpu/mpc8220/dma.h multi-channel dma header file
-- arch/ppc/cpu/mpc8220/dramSetup.h dram setup header file
-- arch/ppc/cpu/mpc8220/fec.h MPC8220 FEC header file
-- arch/ppc/cpu/mpc8220/cpu.c cpu specific code
-- arch/ppc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
-- arch/ppc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
-- arch/ppc/cpu/mpc8220/fec.c MPC8220 FEC driver
-- arch/ppc/cpu/mpc8220/i2c.c MPC8220 I2C driver
-- arch/ppc/cpu/mpc8220/interrupts.c interrupt support (not enable)
-- arch/ppc/cpu/mpc8220/loadtask.c load dma
-- arch/ppc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
-- arch/ppc/cpu/mpc8220/traps.c exception
-- arch/ppc/cpu/mpc8220/uart.c MPC8220 UART driver
-- arch/ppc/cpu/mpc8220/Makefile Makefile
-- arch/ppc/cpu/mpc8220/config.mk config make
-- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/ppc/cpu/mpc8220/io.S io functions
-- arch/ppc/cpu/mpc8220/start.S start up
+- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file
+- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file
+- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file
+- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code
+- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
+- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
+- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver
+- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver
+- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable)
+- arch/powerpc/cpu/mpc8220/loadtask.c load dma
+- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
+- arch/powerpc/cpu/mpc8220/traps.c exception
+- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver
+- arch/powerpc/cpu/mpc8220/Makefile Makefile
+- arch/powerpc/cpu/mpc8220/config.mk config make
+- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
+- arch/powerpc/cpu/mpc8220/io.S io functions
+- arch/powerpc/cpu/mpc8220/start.S start up
- include/mpc8220.h
./common/board.c
Added call to initialize debugger on startup.
-./arch/ppc/cpu/ppc4xx/Makefile
+./arch/powerpc/cpu/ppc4xx/Makefile
Added bedbug_405.c to the Makefile.
-./arch/ppc/cpu/ppc4xx/start.S
+./arch/powerpc/cpu/ppc4xx/start.S
Added code to handle the debug exception (0x2000) on the 405.
Also added code to handle critical exceptions since the debug
is treated as critical on the 405.
-./arch/ppc/cpu/ppc4xx/traps.c
+./arch/powerpc/cpu/ppc4xx/traps.c
Added more detailed output for the program exception to tell
if it is an illegal instruction, privileged instruction or
a trap. Also added debug trap handler.
hardware breakpoints and stepping through code. These
routines are common to all PowerPC processors.
-./arch/ppc/cpu/ppc4xx/bedbug_405.c
+./arch/powerpc/cpu/ppc4xx/bedbug_405.c
AMCC PPC405 specific debugger routines.
common/cmd_bedbug.c
Added call to initialize 860 debugger.
- arch/ppc/cpu/mpc8xx/Makefile
+ arch/powerpc/cpu/mpc8xx/Makefile
Added new file "bedbug_860.c" to the makefile
- arch/ppc/cpu/mpc8xx/start.S
+ arch/powerpc/cpu/mpc8xx/start.S
Added handler for InstructionBreakpoint (0xfd00)
- arch/ppc/cpu/mpc8xx/traps.c
+ arch/powerpc/cpu/mpc8xx/traps.c
Added new routine DebugException()
New Files:
- arch/ppc/cpu/mpc8xx/bedbug_860.c
+ arch/powerpc/cpu/mpc8xx/bedbug_860.c
CPU-specific routines for 860 debug registers.
u-boot-0.2.0/common/cmd_boot.c
u-boot-0.2.0/common/cmd_reginfo.c
u-boot-0.2.0/common/environment.c
-u-boot-0.2.0/arch/ppc/cpu/mpc5xx/*
+u-boot-0.2.0/arch/powerpc/cpu/mpc5xx/*
u-boot-0.2.0/include/cmd_reginfo.h
u-boot-0.2.0/include/common.h
u-boot-0.2.0/include/ppc_asm.tmpl
u-boot-0.2.0/include/status_led.h
u-boot-0.2.0/include/asm-ppc/u-boot.h
u-boot-0.2.0/include/asm-ppc/5xx_immap.h
-u-boot-0.2.0/arch/ppc/lib/board.c
-u-boot-0.2.0/arch/ppc/lib/cache.c
-u-boot-0.2.0/arch/ppc/lib/time.c
+u-boot-0.2.0/arch/powerpc/lib/board.c
+u-boot-0.2.0/arch/powerpc/lib/cache.c
+u-boot-0.2.0/arch/powerpc/lib/time.c
u-boot-0.2.0/Makefile
u-boot-0.2.0/CREDITS
u-boot-0.2.0/doc/README.mpc5xx
kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
default configuration files as your starting points to configure the
kernel:
- arch/ppc/configs/mpc8540_ads_defconfig
- arch/ppc/configs/mpc8560_ads_defconfig
+ arch/powerpc/configs/mpc8540_ads_defconfig
+ arch/powerpc/configs/mpc8560_ads_defconfig
3. DEFINITIONS AND COMPILATION
/*
- * arch/ppc/kernel/pci_auto.c
+ * arch/powerpc/kernel/pci_auto.c
*
* PCI autoconfiguration library
*
/*--------------------------------------------------------------------+
* Fixed PHY (PHY-less) support for Ethernet Ports.
*
- * Copied from arch/ppc/cpu/ppc4xx/4xx_enet.c
+ * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
*--------------------------------------------------------------------*/
/*
/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
/*
* Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
- * With help from the common/soft_spi and arch/ppc/cpu/mpc8260 drivers
+ * With help from the common/soft_spi and arch/powerpc/cpu/mpc8260 drivers
*
* See file CREDITS for list of people who contributed to this
* project.
# MA 02111-1307 USA
#
-ifeq ($(ARCH),ppc)
+ifeq ($(ARCH),powerpc)
LOAD_ADDR = 0x40000
endif
ifeq ($(ARCH),arm)
EXT_COBJ_FILES-$(CONFIG_API) += lib/string.o
EXT_COBJ_FILES-$(CONFIG_API) += lib/time.o
EXT_COBJ_FILES-$(CONFIG_API) += lib/vsprintf.o
-ifeq ($(ARCH),ppc)
-EXT_SOBJ_FILES-$(CONFIG_API) += arch/ppc/lib/ppcstring.o
+ifeq ($(ARCH),powerpc)
+EXT_SOBJ_FILES-$(CONFIG_API) += arch/powerpc/lib/ppcstring.o
endif
# Create a list of source files so their dependencies can be auto-generated
/* The dpalloc function used and implemented in this file was derieved
- * from PPCBoot/U-Boot file "arch/ppc/cpu/mpc8260/commproc.c".
+ * from PPCBoot/U-Boot file "arch/powerpc/cpu/mpc8260/commproc.c".
*/
/* Author: Arun Dharankar <ADharankar@ATTBI.Com>
*/
/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
* copyright notice:
*
* General Purpose functions for the global management of the
/*
* Backward compatible definitions,
- * so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
*/
#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2)
#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3)
#define CONFIG_SYS_FLASH_BASE 0xfe000000
/*
- * The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
* variable defined
*/
#define CONFIG_SYS_FLASH_SIZE 0x02000000
* SDRAM Controller DDR autocalibration values and takes a lot longer
* to run than Method_B.
* (See the Method_A and Method_B algorithm discription in the file:
- * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
* Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
*
* DDR Autocalibration Method_B is the default.
* taken from the orignal Linkstation boot code
*
* Most of the low level configuration setttings are normally used
- * in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
+ * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
* Low level initialisation is done in board/linkstation/early_init.S
* The values below are included for reference purpose only
*/
* Definitions for initial stack pointer and data area (in data cache)
*/
/* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./arch/ppc/cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/start.S */
#define CONFIG_SYS_TEMP_STACK_OCM 1
/* On Chip Memory location */
* Taken from PPCBoot board/icecube/icecube.h
*/
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
#define CONFIG_SYS_EBC_PB0AP 0x04002480
/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000
*
* Taken in part from PPCBoot board/icecube/icecube.h
*/
-/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
#define CONFIG_SYS_GPIO0_OSRH 0x55555550
#define CONFIG_SYS_GPIO0_OSRL 0x00000110
#define CONFIG_SYS_GPIO0_ISR1H 0x00000000
* - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
* - Stackpointer will be located to
* (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
- * in arch/ppc/cpu/ppc4xx/start.S
+ * in arch/powerpc/cpu/ppc4xx/start.S
*/
#undef CONFIG_SYS_INIT_DCACHE_CS
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/* ################################################################################### */
-/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
+/* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects */
/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */
/* This chip select accesses the boot device */
/*
* NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
*
* Cleanup and unification
* (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S.
+ * assembly versions such as arch/powerpc/lib/div64.S and arch/sh/lib/div64.S.
*/
#include <linux/types.h>
# from cpu directory
$(obj)cache.S:
@rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/cache.S $(obj)cache.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
$(obj)gpio.c:
@rm -f $(obj)gpio.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/gpio.c $(obj)gpio.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $(obj)gpio.c
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)memory.c:
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
# from cpu directory
$(obj)44x_spd_ddr2.c: $(obj)ecc.h
@rm -f $(obj)44x_spd_ddr2.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c
$(obj)cache.S:
@rm -f $(obj)cache.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/cache.S $(obj)cache.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S
$(obj)ecc.h:
@rm -f $(obj)ecc.h
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/ecc.h $(obj)ecc.h
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $(obj)ecc.h
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from nand_spl directory
$(obj)nand_boot.c:
# from cpu directory
$(obj)denali_data_eye.c:
@rm -f $(obj)denali_data_eye.c
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
$(obj)resetvec.S:
@rm -f $(obj)resetvec.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
$(obj)start.S:
@rm -f $(obj)start.S
- ln -s $(SRCTREE)/arch/ppc/cpu/ppc4xx/start.S $(obj)start.S
+ ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S
# from board directory
$(obj)init.S:
# create symbolic links for common files
$(obj)start.S:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
$(obj)nand_boot_fsl_elbc.c:
ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)time.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/time.c $(obj)time.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/ppc/lib/ticks.S $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
#########################################################################
# create symbolic links for common files
$(obj)start.S:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
$(obj)nand_boot_fsl_elbc.c:
ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)time.c:
- ln -sf $(SRCTREE)/arch/ppc/lib/time.c $(obj)time.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/ppc/lib/ticks.S $(obj)ticks.S
+ ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
#########################################################################
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)cache.c:
@rm -f $(obj)cache.c
- ln -sf $(SRCTREE)/arch/ppc/lib/cache.c $(obj)cache.c
+ ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
$(obj)cpu_init_early.c:
@rm -f $(obj)cpu_init_early.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
$(obj)cpu_init_nand.c:
@rm -f $(obj)cpu_init_nand.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
$(obj)fsl_law.c:
@rm -f $(obj)fsl_law.c
$(obj)fixed_ivor.S:
@rm -f $(obj)fixed_ivor.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
$(obj)start.S: $(obj)fixed_ivor.S
@rm -f $(obj)start.S
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/start.S $(obj)start.S
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S
$(obj)tlb.c:
@rm -f $(obj)tlb.c
- ln -sf $(SRCTREE)/arch/ppc/cpu/mpc85xx/tlb.c $(obj)tlb.c
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c
$(obj)tlb_table.c:
@rm -f $(obj)tlb_table.c
$(obj)start.S:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/cpu/mpc83xx/start.S $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $@
$(obj)nand_boot_fsl_elbc.c:
@rm -f $@
$(obj)nand_init.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/cpu/mpc83xx/nand_init.c $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $@
$(obj)cache.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/cache.c $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/cache.c $@
$(obj)time.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/time.c $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/time.c $@
$(obj)ticks.S:
@rm -f $@
- ln -s $(SRCTREE)/arch/ppc/lib/ticks.S $@
+ ln -s $(SRCTREE)/arch/powerpc/lib/ticks.S $@
#########################################################################
/* Additional Special-Purpose Registers.
* The values must match the initialization
- * values from arch/ppc/cpu/ppc4xx/start.S
+ * values from arch/powerpc/cpu/ppc4xx/start.S
*/
{0x30, "PID", 0x00000000, 0x00000000},
{0x3a, "CSRR0", 0x00000000, 0x00000000},
--- /dev/null
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB = libpost$(ARCH).a
+
+AOBJS-$(CONFIG_HAS_POST) += asm.o
+COBJS-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
+COBJS-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
+COBJS-$(CONFIG_HAS_POST) += store.o load.o cr.o b.o multi.o string.o complex.o
+
+include $(TOPDIR)/post/rules.mk
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Logic instructions: andi., andis.
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_andi_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong res;
+} cpu_post_andi_table[] =
+{
+ {
+ OP_ANDI_,
+ 0x80008000,
+ 0xffff,
+ 0x00008000
+ },
+ {
+ OP_ANDIS_,
+ 0x80008000,
+ 0xffff,
+ 0x80000000
+ },
+};
+static unsigned int cpu_post_andi_size =
+ sizeof (cpu_post_andi_table) / sizeof (struct cpu_post_andi_s);
+
+int cpu_post_test_andi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_andi_size && ret == 0; i++)
+ {
+ struct cpu_post_andi_s *test = cpu_post_andi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11IX(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at andi test %d !\n", i);
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+/* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
+ .global cpu_post_exec_02
+cpu_post_exec_02:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+
+ subi r1, r1, 104
+ stmw r6, 0(r1)
+
+ mtlr r3
+ mr r3, r4
+ mr r4, r5
+ blrl
+
+ lmw r6, 0(r1)
+ addi r1, r1, 104
+
+ lwz r0, 0(r1)
+ addi r1, r1, 4
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
+ .global cpu_post_exec_04
+cpu_post_exec_04:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+
+ subi r1, r1, 96
+ stmw r8, 0(r1)
+
+ mtlr r3
+ mr r3, r4
+ mr r4, r5
+ mr r5, r6
+ mtxer r7
+ blrl
+
+ lmw r8, 0(r1)
+ addi r1, r1, 96
+
+ lwz r0, 0(r1)
+ addi r1, r1, 4
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
+ .global cpu_post_exec_12
+cpu_post_exec_12:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ mr r3, r5
+ mr r4, r6
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
+ .global cpu_post_exec_11
+cpu_post_exec_11:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ mr r3, r5
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
+ .global cpu_post_exec_21
+cpu_post_exec_21:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ li r0, 0
+ mtxer r0
+ lwz r0, 0(r4)
+ mtcr r0
+
+ mtlr r3
+ mr r3, r6
+ blrl
+
+ mfcr r0
+ lwz r4, 4(r1)
+ stw r0, 0(r4)
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2); */
+ .global cpu_post_exec_22
+cpu_post_exec_22:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ li r0, 0
+ mtxer r0
+ lwz r0, 0(r4)
+ mtcr r0
+
+ mtlr r3
+ mr r3, r6
+ mr r4, r7
+ blrl
+
+ mfcr r0
+ lwz r4, 4(r1)
+ stw r0, 0(r4)
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
+ .global cpu_post_exec_12w
+cpu_post_exec_12w:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ mr r5, r6
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
+ .global cpu_post_exec_11w
+cpu_post_exec_11w:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ blrl
+
+ lwz r4, 0(r1)
+ stw r3, 0(r4)
+
+ lwz r0, 4(r1)
+ addi r1, r1, 8
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
+ .global cpu_post_exec_22w
+cpu_post_exec_22w:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r6, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ mr r4, r5
+ blrl
+
+ lwz r4, 4(r1)
+ stw r3, 0(r4)
+ lwz r4, 0(r1)
+ stw r5, 0(r4)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
+ .global cpu_post_exec_21w
+cpu_post_exec_21w:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ blrl
+
+ lwz r5, 4(r1)
+ stw r3, 0(r5)
+ lwz r5, 0(r1)
+ stw r4, 0(r5)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
+ .global cpu_post_exec_21x
+cpu_post_exec_21x:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+
+ mtlr r3
+ mr r3, r6
+ blrl
+
+ lwz r5, 4(r1)
+ stw r3, 0(r5)
+ lwz r5, 0(r1)
+ stw r4, 0(r5)
+
+ lwz r0, 8(r1)
+ addi r1, r1, 12
+ mtlr r0
+ blr
+
+/* void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+ ulong cr); */
+ .global cpu_post_exec_31
+cpu_post_exec_31:
+ isync
+ mflr r0
+ stwu r0, -4(r1)
+ stwu r4, -4(r1)
+ stwu r5, -4(r1)
+ stwu r6, -4(r1)
+
+ mtlr r3
+ lwz r3, 0(r4)
+ lwz r4, 0(r5)
+ mr r6, r7
+
+ mfcr r7
+ blrl
+ mtcr r7
+
+ lwz r7, 8(r1)
+ stw r3, 0(r7)
+ lwz r7, 4(r1)
+ stw r4, 0(r7)
+ lwz r7, 0(r1)
+ stw r5, 0(r7)
+
+ lwz r0, 12(r1)
+ addi r1, r1, 16
+ mtlr r0
+ blr
+
+/* int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n); */
+ .global cpu_post_complex_1_asm
+cpu_post_complex_1_asm:
+ li r9,0
+ cmpw r9,r7
+ bge cpu_post_complex_1_done
+ mtctr r7
+cpu_post_complex_1_loop:
+ mullw r0,r3,r4
+ subf r0,r5,r0
+ divw r0,r0,r6
+ add r9,r9,r0
+ bdnz cpu_post_complex_1_loop
+cpu_post_complex_1_done:
+ mr r3,r9
+ blr
+
+/* int cpu_post_complex_2_asm (int x, int n); */
+ .global cpu_post_complex_2_asm
+cpu_post_complex_2_asm:
+ mr. r0,r4
+ mtctr r0
+ mr r0,r3
+ li r3,1
+ li r4,1
+ blelr
+cpu_post_complex_2_loop:
+ mullw r3,r3,r0
+ add r3,r3,r4
+ bdnz cpu_post_complex_2_loop
+blr
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Branch instructions: b, bl, bc
+ *
+ * The first 2 instructions (b, bl) are verified by jumping
+ * to a fixed address and checking whether control was transfered
+ * to that very point. For the bl instruction the value of the
+ * link register is checked as well (using mfspr).
+ * To verify the bc instruction various combinations of the BI/BO
+ * fields, the CTR and the condition register values are
+ * checked. The list of such combinations is pre-built and
+ * linked in U-Boot at build time.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+ ulong cr);
+
+static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
+ int pjump, int decr, int link, ulong pctr, ulong cr)
+{
+ int ret = 0;
+ ulong lr = 0;
+ ulong ctr = pctr;
+ ulong jump;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(6),
+ ASM_MFLR(6),
+ ASM_MTCTR(3),
+ ASM_MTLR(4),
+ ASM_LI(5, 1),
+ ASM_3O(cmd, bo, bi, 8),
+ ASM_LI(5, 0),
+ ASM_MFCTR(3),
+ ASM_MFLR(4),
+ ASM_MTLR(6),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_31 (code, &ctr, &lr, &jump, cr);
+
+ if (ret == 0)
+ ret = pjump == jump ? 0 : -1;
+ if (ret == 0)
+ {
+ if (decr)
+ ret = pctr == ctr + 1 ? 0 : -1;
+ else
+ ret = pctr == ctr ? 0 : -1;
+ }
+ if (ret == 0)
+ {
+ if (link)
+ ret = lr == (ulong) code + 24 ? 0 : -1;
+ else
+ ret = lr == 0 ? 0 : -1;
+ }
+
+ return ret;
+}
+
+int cpu_post_test_b (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ if (ret == 0)
+ {
+ ulong code[] =
+ {
+ ASM_MFLR(4),
+ ASM_MTLR(3),
+ ASM_B(4),
+ ASM_MFLR(3),
+ ASM_MTLR(4),
+ ASM_BLR,
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, &res, 0);
+
+ ret = res == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at b1 test !\n");
+ }
+ }
+
+ if (ret == 0)
+ {
+ ulong code[] =
+ {
+ ASM_MFLR(4),
+ ASM_MTLR(3),
+ ASM_BL(4),
+ ASM_MFLR(3),
+ ASM_MTLR(4),
+ ASM_BLR,
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, &res, 0);
+
+ ret = res == (ulong)code + 12 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at b2 test !\n");
+ }
+ }
+
+ if (ret == 0)
+ {
+ ulong cc, cd;
+ int cond;
+ ulong ctr;
+ int link;
+
+ i = 0;
+
+ for (cc = 0; cc < 4 && ret == 0; cc++)
+ {
+ for (cd = 0; cd < 4 && ret == 0; cd++)
+ {
+ for (link = 0; link <= 1 && ret == 0; link++)
+ {
+ for (cond = 0; cond <= 1 && ret == 0; cond++)
+ {
+ for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
+ {
+ int decr = cd < 2;
+ int cr = cond ? 0x80000000 : 0x00000000;
+ int jumpc = cc >= 2 ||
+ (cc == 0 && !cond) ||
+ (cc == 1 && cond);
+ int jumpd = cd >= 2 ||
+ (cd == 0 && ctr != 1) ||
+ (cd == 1 && ctr == 1);
+ int jump = jumpc && jumpd;
+
+ ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
+ (cc << 3) + (cd << 1), 0, jump, decr, link,
+ ctr, cr);
+
+ if (ret != 0)
+ {
+ post_log ("Error at b3 test %d !\n", i);
+ }
+
+ i++;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions: cmpw, cmplw
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2);
+
+static struct cpu_post_cmp_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong cr;
+ ulong res;
+} cpu_post_cmp_table[] =
+{
+ {
+ OP_CMPW,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPW,
+ 123,
+ 133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPW,
+ 123,
+ -133,
+ 4,
+ 0x04
+ },
+ {
+ OP_CMPLW,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPLW,
+ 123,
+ -133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPLW,
+ 123,
+ 113,
+ 4,
+ 0x04
+ },
+};
+static unsigned int cpu_post_cmp_size =
+ sizeof (cpu_post_cmp_table) / sizeof (struct cpu_post_cmp_s);
+
+int cpu_post_test_cmp (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
+ {
+ struct cpu_post_cmp_s *test = cpu_post_cmp_table + i;
+ unsigned long code[] =
+ {
+ ASM_2C(test->cmd, test->cr, 3, 4),
+ ASM_MFCR(3),
+ ASM_BLR
+ };
+ ulong res;
+
+ cpu_post_exec_12 (code, & res, test->op1, test->op2);
+
+ ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cmp test %d !\n", i);
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions: cmpwi, cmplwi
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+
+static struct cpu_post_cmpi_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong cr;
+ ulong res;
+} cpu_post_cmpi_table[] =
+{
+ {
+ OP_CMPWI,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPWI,
+ 123,
+ 133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPWI,
+ 123,
+ -133,
+ 4,
+ 0x04
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ 123,
+ 2,
+ 0x02
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ -133,
+ 3,
+ 0x08
+ },
+ {
+ OP_CMPLWI,
+ 123,
+ 113,
+ 4,
+ 0x04
+ },
+};
+static unsigned int cpu_post_cmpi_size =
+ sizeof (cpu_post_cmpi_table) / sizeof (struct cpu_post_cmpi_s);
+
+int cpu_post_test_cmpi (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
+ {
+ struct cpu_post_cmpi_s *test = cpu_post_cmpi_table + i;
+ unsigned long code[] =
+ {
+ ASM_1IC(test->cmd, test->cr, 3, test->op2),
+ ASM_MFCR(3),
+ ASM_BLR
+ };
+ ulong res;
+
+ cpu_post_exec_11 (code, & res, test->op1);
+
+ ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cmpi test %d !\n", i);
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Complex calculations
+ *
+ * The calculations in this test are just a combination of simpler
+ * calculations, but probably under different timing conditions, etc.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n);
+extern int cpu_post_complex_2_asm (int x, int n);
+
+ /*
+ * n
+ * SUM (a1 * a2 - a3) / a4 = n * result
+ * i=1
+ */
+static int cpu_post_test_complex_1 (void)
+{
+ int a1 = 666;
+ int a2 = 667;
+ int a3 = 668;
+ int a4 = 66;
+ int n = 100;
+ int result = 6720; /* (a1 * a2 - a3) / a4 */
+
+ if (cpu_post_complex_1_asm(a1, a2, a3, a4, n) != n * result)
+ {
+ return -1;
+ }
+
+ return 0;
+}
+
+ /* (1 + x + x^2 + ... + x^n) * (1 - x) = 1 - x^(n+1)
+ */
+static int cpu_post_test_complex_2 (void)
+{
+ int ret = -1;
+ int x;
+ int n;
+ int k;
+ int left;
+ int right;
+
+ for (x = -8; x <= 8; x ++)
+ {
+ n = 9;
+
+ left = cpu_post_complex_2_asm(x, n);
+ left *= 1 - x;
+
+ right = 1;
+ for (k = 0; k <= n; k ++)
+ {
+ right *= x;
+ }
+ right = 1 - right;
+
+ if (left != right)
+ {
+ goto Done;
+ }
+ }
+
+ ret = 0;
+ Done:
+
+ return ret;
+}
+
+int cpu_post_test_complex (void)
+{
+ int ret = 0;
+ int flag = disable_interrupts();
+
+ if (ret == 0)
+ {
+ ret = cpu_post_test_complex_1();
+ }
+
+ if (ret == 0)
+ {
+ ret = cpu_post_test_complex_2();
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at complex test !\n");
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#include <watchdog.h>
+#include <post.h>
+#include <asm/mmu.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern int cpu_post_test_cmp (void);
+extern int cpu_post_test_cmpi (void);
+extern int cpu_post_test_two (void);
+extern int cpu_post_test_twox (void);
+extern int cpu_post_test_three (void);
+extern int cpu_post_test_threex (void);
+extern int cpu_post_test_threei (void);
+extern int cpu_post_test_andi (void);
+extern int cpu_post_test_srawi (void);
+extern int cpu_post_test_rlwnm (void);
+extern int cpu_post_test_rlwinm (void);
+extern int cpu_post_test_rlwimi (void);
+extern int cpu_post_test_store (void);
+extern int cpu_post_test_load (void);
+extern int cpu_post_test_cr (void);
+extern int cpu_post_test_b (void);
+extern int cpu_post_test_multi (void);
+extern int cpu_post_test_string (void);
+extern int cpu_post_test_complex (void);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ulong cpu_post_makecr (long v)
+{
+ ulong cr = 0;
+
+ if (v < 0)
+ cr |= 0x80000000;
+ if (v > 0)
+ cr |= 0x40000000;
+ if (v == 0)
+ cr |= 0x20000000;
+
+ return cr;
+}
+
+int cpu_post_test (int flags)
+{
+ int ic = icache_status ();
+ int ret = 0;
+
+ WATCHDOG_RESET();
+ if (ic)
+ icache_disable ();
+#ifdef CONFIG_4xx_DCACHE
+ /* disable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
+
+ if (ret == 0)
+ ret = cpu_post_test_cmp ();
+ if (ret == 0)
+ ret = cpu_post_test_cmpi ();
+ if (ret == 0)
+ ret = cpu_post_test_two ();
+ if (ret == 0)
+ ret = cpu_post_test_twox ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_three ();
+ if (ret == 0)
+ ret = cpu_post_test_threex ();
+ if (ret == 0)
+ ret = cpu_post_test_threei ();
+ if (ret == 0)
+ ret = cpu_post_test_andi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_srawi ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwnm ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwinm ();
+ if (ret == 0)
+ ret = cpu_post_test_rlwimi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_store ();
+ if (ret == 0)
+ ret = cpu_post_test_load ();
+ if (ret == 0)
+ ret = cpu_post_test_cr ();
+ if (ret == 0)
+ ret = cpu_post_test_b ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_multi ();
+ WATCHDOG_RESET();
+ if (ret == 0)
+ ret = cpu_post_test_string ();
+ if (ret == 0)
+ ret = cpu_post_test_complex ();
+ WATCHDOG_RESET();
+
+ if (ic)
+ icache_enable ();
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+
+ WATCHDOG_RESET();
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CPU */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CPU_ASM_H
+#define _CPU_ASM_H
+
+#define BIT_C 0x00000001
+
+#define OP_BLR 0x4e800020
+#define OP_EXTSB 0x7c000774
+#define OP_EXTSH 0x7c000734
+#define OP_NEG 0x7c0000d0
+#define OP_CNTLZW 0x7c000034
+#define OP_ADD 0x7c000214
+#define OP_ADDC 0x7c000014
+#define OP_ADDME 0x7c0001d4
+#define OP_ADDZE 0x7c000194
+#define OP_ADDE 0x7c000114
+#define OP_ADDI 0x38000000
+#define OP_SUBF 0x7c000050
+#define OP_SUBFC 0x7c000010
+#define OP_SUBFE 0x7c000110
+#define OP_SUBFME 0x7c0001d0
+#define OP_SUBFZE 0x7c000190
+#define OP_MFCR 0x7c000026
+#define OP_MTCR 0x7c0ff120
+#define OP_MFXER 0x7c0102a6
+#define OP_MTXER 0x7c0103a6
+#define OP_MCRXR 0x7c000400
+#define OP_MCRF 0x4c000000
+#define OP_CRAND 0x4c000202
+#define OP_CRANDC 0x4c000102
+#define OP_CROR 0x4c000382
+#define OP_CRORC 0x4c000342
+#define OP_CRXOR 0x4c000182
+#define OP_CRNAND 0x4c0001c2
+#define OP_CRNOR 0x4c000042
+#define OP_CREQV 0x4c000242
+#define OP_CMPW 0x7c000000
+#define OP_CMPLW 0x7c000040
+#define OP_CMPWI 0x2c000000
+#define OP_CMPLWI 0x28000000
+#define OP_MULLW 0x7c0001d6
+#define OP_MULHW 0x7c000096
+#define OP_MULHWU 0x7c000016
+#define OP_DIVW 0x7c0003d6
+#define OP_DIVWU 0x7c000396
+#define OP_OR 0x7c000378
+#define OP_ORC 0x7c000338
+#define OP_XOR 0x7c000278
+#define OP_NAND 0x7c0003b8
+#define OP_NOR 0x7c0000f8
+#define OP_EQV 0x7c000238
+#define OP_SLW 0x7c000030
+#define OP_SRW 0x7c000430
+#define OP_SRAW 0x7c000630
+#define OP_ORI 0x60000000
+#define OP_ORIS 0x64000000
+#define OP_XORI 0x68000000
+#define OP_XORIS 0x6c000000
+#define OP_ANDI_ 0x70000000
+#define OP_ANDIS_ 0x74000000
+#define OP_SRAWI 0x7c000670
+#define OP_RLWINM 0x54000000
+#define OP_RLWNM 0x5c000000
+#define OP_RLWIMI 0x50000000
+#define OP_LWZ 0x80000000
+#define OP_LHZ 0xa0000000
+#define OP_LHA 0xa8000000
+#define OP_LBZ 0x88000000
+#define OP_LWZU 0x84000000
+#define OP_LHZU 0xa4000000
+#define OP_LHAU 0xac000000
+#define OP_LBZU 0x8c000000
+#define OP_LWZX 0x7c00002e
+#define OP_LHZX 0x7c00022e
+#define OP_LHAX 0x7c0002ae
+#define OP_LBZX 0x7c0000ae
+#define OP_LWZUX 0x7c00006e
+#define OP_LHZUX 0x7c00026e
+#define OP_LHAUX 0x7c0002ee
+#define OP_LBZUX 0x7c0000ee
+#define OP_STW 0x90000000
+#define OP_STH 0xb0000000
+#define OP_STB 0x98000000
+#define OP_STWU 0x94000000
+#define OP_STHU 0xb4000000
+#define OP_STBU 0x9c000000
+#define OP_STWX 0x7c00012e
+#define OP_STHX 0x7c00032e
+#define OP_STBX 0x7c0001ae
+#define OP_STWUX 0x7c00016e
+#define OP_STHUX 0x7c00036e
+#define OP_STBUX 0x7c0001ee
+#define OP_B 0x48000000
+#define OP_BL 0x48000001
+#define OP_BC 0x40000000
+#define OP_BCL 0x40000001
+#define OP_MTLR 0x7c0803a6
+#define OP_MFLR 0x7c0802a6
+#define OP_MTCTR 0x7c0903a6
+#define OP_MFCTR 0x7c0902a6
+#define OP_LMW 0xb8000000
+#define OP_STMW 0xbc000000
+#define OP_LSWI 0x7c0004aa
+#define OP_LSWX 0x7c00042a
+#define OP_STSWI 0x7c0005aa
+#define OP_STSWX 0x7c00052a
+
+#define ASM_0(opcode) (opcode)
+#define ASM_1(opcode, rd) ((opcode) + \
+ ((rd) << 21))
+#define ASM_1C(opcode, cr) ((opcode) + \
+ ((cr) << 23))
+#define ASM_11(opcode, rd, rs) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16))
+#define ASM_11C(opcode, cd, cs) ((opcode) + \
+ ((cd) << 23) + \
+ ((cs) << 18))
+#define ASM_11X(opcode, rd, rs) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16))
+#define ASM_11I(opcode, rd, rs, simm) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16) + \
+ ((simm) & 0xffff))
+#define ASM_11IF(opcode, rd, rs, simm) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs) << 16) + \
+ ((simm) << 11))
+#define ASM_11S(opcode, rd, rs, sh) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((sh) << 11))
+#define ASM_11IX(opcode, rd, rs, imm) ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((imm) & 0xffff))
+#define ASM_12(opcode, rd, rs1, rs2) ((opcode) + \
+ ((rd) << 21) + \
+ ((rs1) << 16) + \
+ ((rs2) << 11))
+#define ASM_12F(opcode, fd, fs1, fs2) ((opcode) + \
+ ((fd) << 21) + \
+ ((fs1) << 16) + \
+ ((fs2) << 11))
+#define ASM_12X(opcode, rd, rs1, rs2) ((opcode) + \
+ ((rs1) << 21) + \
+ ((rd) << 16) + \
+ ((rs2) << 11))
+#define ASM_2C(opcode, cr, rs1, rs2) ((opcode) + \
+ ((cr) << 23) + \
+ ((rs1) << 16) + \
+ ((rs2) << 11))
+#define ASM_1IC(opcode, cr, rs, imm) ((opcode) + \
+ ((cr) << 23) + \
+ ((rs) << 16) + \
+ ((imm) & 0xffff))
+#define ASM_122(opcode, rd, rs1, rs2, imm1, imm2) \
+ ((opcode) + \
+ ((rs1) << 21) + \
+ ((rd) << 16) + \
+ ((rs2) << 11) + \
+ ((imm1) << 6) + \
+ ((imm2) << 1))
+#define ASM_113(opcode, rd, rs, imm1, imm2, imm3) \
+ ((opcode) + \
+ ((rs) << 21) + \
+ ((rd) << 16) + \
+ ((imm1) << 11) + \
+ ((imm2) << 6) + \
+ ((imm3) << 1))
+#define ASM_1O(opcode, off) ((opcode) + (off))
+#define ASM_3O(opcode, bo, bi, off) ((opcode) + \
+ ((bo) << 21) + \
+ ((bi) << 16) + \
+ (off))
+
+#define ASM_ADDI(rd, rs, simm) ASM_11I(OP_ADDI, rd, rs, simm)
+#define ASM_BLR ASM_0(OP_BLR)
+#define ASM_STW(rd, rs, simm) ASM_11I(OP_STW, rd, rs, simm)
+#define ASM_LWZ(rd, rs, simm) ASM_11I(OP_LWZ, rd, rs, simm)
+#define ASM_MFCR(rd) ASM_1(OP_MFCR, rd)
+#define ASM_MTCR(rd) ASM_1(OP_MTCR, rd)
+#define ASM_MFXER(rd) ASM_1(OP_MFXER, rd)
+#define ASM_MTXER(rd) ASM_1(OP_MTXER, rd)
+#define ASM_MFCTR(rd) ASM_1(OP_MFCTR, rd)
+#define ASM_MTCTR(rd) ASM_1(OP_MTCTR, rd)
+#define ASM_MCRXR(cr) ASM_1C(OP_MCRXR, cr)
+#define ASM_MCRF(cd, cs) ASM_11C(OP_MCRF, cd, cs)
+#define ASM_B(off) ASM_1O(OP_B, off)
+#define ASM_BL(off) ASM_1O(OP_BL, off)
+#define ASM_MFLR(rd) ASM_1(OP_MFLR, rd)
+#define ASM_MTLR(rd) ASM_1(OP_MTLR, rd)
+#define ASM_LI(rd, imm) ASM_ADDI(rd, 0, imm)
+#define ASM_LMW(rd, rs, simm) ASM_11I(OP_LMW, rd, rs, simm)
+#define ASM_STMW(rd, rs, simm) ASM_11I(OP_STMW, rd, rs, simm)
+#define ASM_LSWI(rd, rs, simm) ASM_11IF(OP_LSWI, rd, rs, simm)
+#define ASM_LSWX(rd, rs1, rs2) ASM_12(OP_LSWX, rd, rs1, rs2)
+#define ASM_STSWI(rd, rs, simm) ASM_11IF(OP_STSWI, rd, rs, simm)
+#define ASM_STSWX(rd, rs1, rs2) ASM_12(OP_STSWX, rd, rs1, rs2)
+
+
+#endif /* _CPU_ASM_H */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Condition register istructions: mtcr, mfcr, mcrxr,
+ * crand, crandc, cror, crorc, crxor,
+ * crnand, crnor, creqv, mcrf
+ *
+ * The mtcrf/mfcr instructions is tested by loading different
+ * values into the condition register (mtcrf), moving its value
+ * to a general-purpose register (mfcr) and comparing this value
+ * with the expected one.
+ * The mcrxr instruction is tested by loading a fixed value
+ * into the XER register (mtspr), moving XER value to the
+ * condition register (mcrxr), moving it to a general-purpose
+ * register (mfcr) and comparing the value of this register with
+ * the expected one.
+ * The rest of instructions is tested by loading a fixed
+ * value into the condition register (mtcrf), executing each
+ * instruction several times to modify all 4-bit condition
+ * fields, moving the value of the conditional register to a
+ * general-purpose register (mfcr) and comparing it with the
+ * expected one.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3);
+
+static ulong cpu_post_cr_table1[] =
+{
+ 0xaaaaaaaa,
+ 0x55555555,
+};
+static unsigned int cpu_post_cr_size1 =
+ sizeof (cpu_post_cr_table1) / sizeof (ulong);
+
+static struct cpu_post_cr_s2 {
+ ulong xer;
+ ulong cr;
+} cpu_post_cr_table2[] =
+{
+ {
+ 0xa0000000,
+ 1
+ },
+ {
+ 0x40000000,
+ 5
+ },
+};
+static unsigned int cpu_post_cr_size2 =
+ sizeof (cpu_post_cr_table2) / sizeof (struct cpu_post_cr_s2);
+
+static struct cpu_post_cr_s3 {
+ ulong cr;
+ ulong cs;
+ ulong cd;
+ ulong res;
+} cpu_post_cr_table3[] =
+{
+ {
+ 0x01234567,
+ 0,
+ 4,
+ 0x01230567
+ },
+ {
+ 0x01234567,
+ 7,
+ 0,
+ 0x71234567
+ },
+};
+static unsigned int cpu_post_cr_size3 =
+ sizeof (cpu_post_cr_table3) / sizeof (struct cpu_post_cr_s3);
+
+static struct cpu_post_cr_s4 {
+ ulong cmd;
+ ulong cr;
+ ulong op1;
+ ulong op2;
+ ulong op3;
+ ulong res;
+} cpu_post_cr_table4[] =
+{
+ {
+ OP_CRAND,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRAND,
+ 0x0000ffff,
+ 16,
+ 17,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRANDC,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRANDC,
+ 0x0000ffff,
+ 16,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CROR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CROR,
+ 0x0000ffff,
+ 0,
+ 1,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRORC,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRORC,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRXOR,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRXOR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRNAND,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CRNAND,
+ 0x0000ffff,
+ 16,
+ 17,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRNOR,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+ {
+ OP_CRNOR,
+ 0x0000ffff,
+ 0,
+ 1,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CREQV,
+ 0x0000ffff,
+ 0,
+ 0,
+ 0,
+ 0x8000ffff
+ },
+ {
+ OP_CREQV,
+ 0x0000ffff,
+ 0,
+ 16,
+ 0,
+ 0x0000ffff
+ },
+};
+static unsigned int cpu_post_cr_size4 =
+ sizeof (cpu_post_cr_table4) / sizeof (struct cpu_post_cr_s4);
+
+int cpu_post_test_cr (void)
+{
+ int ret = 0;
+ unsigned int i;
+ unsigned long cr_sav;
+ int flag = disable_interrupts();
+
+ asm ( "mfcr %0" : "=r" (cr_sav) : );
+
+ for (i = 0; i < cpu_post_cr_size1 && ret == 0; i++)
+ {
+ ulong cr = cpu_post_cr_table1[i];
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, cr);
+
+ ret = res == cr ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr1 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size2 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s2 *test = cpu_post_cr_table2 + i;
+ ulong res;
+ ulong xer;
+
+ unsigned long code[] =
+ {
+ ASM_MTXER(3),
+ ASM_MCRXR(test->cr),
+ ASM_MFCR(3),
+ ASM_MFXER(4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_21x (code, &res, &xer, test->xer);
+
+ ret = xer == 0 && ((res << (4 * test->cr)) & 0xe0000000) == test->xer ?
+ 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr2 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size3 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s3 *test = cpu_post_cr_table3 + i;
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_MCRF(test->cd, test->cs),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, test->cr);
+
+ ret = res == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr3 test %d !\n", i);
+ }
+ }
+
+ for (i = 0; i < cpu_post_cr_size4 && ret == 0; i++)
+ {
+ struct cpu_post_cr_s4 *test = cpu_post_cr_table4 + i;
+ ulong res;
+
+ unsigned long code[] =
+ {
+ ASM_MTCR(3),
+ ASM_12F(test->cmd, test->op3, test->op1, test->op2),
+ ASM_MFCR(3),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11 (code, &res, test->cr);
+
+ ret = res == test->res ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at cr4 test %d !\n", i);
+ }
+ }
+
+ asm ( "mtcr %0" : : "r" (cr_sav));
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math1 (void)
+{
+ volatile double a, *p;
+ double c, d;
+ volatile double b;
+
+ d = 1.0;
+ p = &b;
+
+ do
+ {
+ c = d;
+ d = c * 0.5;
+ b = 1 + d;
+ } while (b != 1.0);
+
+ a = 1.0 + c;
+
+ if (a == 1.0) {
+ post_log ("Error in FPU math1 test\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static float rintf (float x)
+{
+ volatile float TWO23 = 8388608.0;
+
+ if (__builtin_fabs (x) < TWO23)
+ {
+ if (x > 0.0)
+ {
+ x += TWO23;
+ x -= TWO23;
+ }
+ else if (x < 0.0)
+ {
+ x = TWO23 - x;
+ x = -(x - TWO23);
+ }
+ }
+
+ return x;
+}
+
+int fpu_post_test_math2 (void)
+{
+ if (rintf (-1.5) != -2.0) {
+ post_log ("Error in FPU math2 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math3 (void)
+{
+ volatile long double dfrom = 1.1;
+ volatile long double m1;
+ volatile long double m2;
+ volatile unsigned long mant_long;
+
+ m1 = dfrom / 2.0;
+ m2 = m1 * 4294967296.0;
+ mant_long = ((unsigned long) m2) & 0xffffffff;
+
+ if (mant_long != 0x8ccccccc) {
+ post_log ("Error in FPU math3 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math4 (void)
+{
+ volatile float reale = 1.0f;
+ volatile float oneplus;
+ int i;
+
+ if (sizeof (float) != 4)
+ return 0;
+
+ for (i = 0; ; i++)
+ {
+ oneplus = 1.0f + reale;
+ if (oneplus == 1.0f)
+ break;
+ reale = reale / 2.0f;
+ }
+ /* Assumes ieee754 accurate arithmetic above. */
+ if (i != 24) {
+ post_log ("Error in FPU math4 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB = libpost$(ARCH)fpu.a
+
+COBJS-$(CONFIG_HAS_POST) += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
+COBJS-$(CONFIG_HAS_POST) += acc1.o compare-fp-1.o mul-subnormal-single-1.o
+
+include $(TOPDIR)/post/rules.mk
+
+CFLAGS := $(shell echo $(CFLAGS) | sed s/-msoft-float//)
+CFLAGS += -mhard-float -fkeep-inline-functions
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static double func (const double *array)
+{
+ double d = *array;
+
+ if (d == 0.0)
+ return d;
+ else
+ return d + func (array + 1);
+}
+
+int fpu_post_test_math5 (void)
+{
+ double values[] = { 0.1e-100, 1.0, -1.0, 0.0 };
+
+ if (func (values) != 0.1e-100) {
+ post_log ("Error in FPU math5 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Test for correctness of composite floating-point comparisons.
+ * Written by Paolo Bonzini, 26th May 2004.
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static int failed;
+
+#define TEST(c) if ((c) != ok) failed++
+#define ORD(a, b) (!__builtin_isunordered ((a), (b)))
+#define UNORD(a, b) (__builtin_isunordered ((a), (b)))
+#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b)))
+#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b)))
+#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b)))
+#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b)))
+#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b)))
+#define LTGT(a, b) (__builtin_islessgreater ((a), (b)))
+
+static float pinf;
+static float ninf;
+static float NaN;
+
+static void iuneq (float x, float y, int ok)
+{
+ TEST (UNEQ (x, y));
+ TEST (!LTGT (x, y));
+ TEST (UNLE (x, y) && UNGE (x,y));
+}
+
+static void ieq (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNEQ (x, y));
+}
+
+static void iltgt (float x, float y, int ok)
+{
+ TEST (!UNEQ (x, y)); /* Not optimizable. */
+ TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */
+ TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y)));
+}
+
+static void ine (float x, float y, int ok)
+{
+ TEST (UNLT (x, y) || UNGT (x, y));
+}
+
+static void iunlt (float x, float y, int ok)
+{
+ TEST (UNLT (x, y));
+ TEST (UNORD (x, y) || (x < y));
+}
+
+static void ilt (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */
+ TEST ((x <= y) && (x != y));
+ TEST ((x <= y) && (y != x));
+ TEST ((x != y) && (x <= y)); /* Not optimized */
+ TEST ((y != x) && (x <= y)); /* Not optimized */
+}
+
+static void iunle (float x, float y, int ok)
+{
+ TEST (UNLE (x, y));
+ TEST (UNORD (x, y) || (x <= y));
+}
+
+static void ile (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */
+ TEST ((x < y) || (x == y));
+ TEST ((y > x) || (x == y));
+ TEST ((x == y) || (x < y)); /* Not optimized */
+ TEST ((y == x) || (x < y)); /* Not optimized */
+}
+
+static void iungt (float x, float y, int ok)
+{
+ TEST (UNGT (x, y));
+ TEST (UNORD (x, y) || (x > y));
+}
+
+static void igt (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */
+ TEST ((x >= y) && (x != y));
+ TEST ((x >= y) && (y != x));
+ TEST ((x != y) && (x >= y)); /* Not optimized */
+ TEST ((y != x) && (x >= y)); /* Not optimized */
+}
+
+static void iunge (float x, float y, int ok)
+{
+ TEST (UNGE (x, y));
+ TEST (UNORD (x, y) || (x >= y));
+}
+
+static void ige (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */
+ TEST ((x > y) || (x == y));
+ TEST ((y < x) || (x == y));
+ TEST ((x == y) || (x > y)); /* Not optimized */
+ TEST ((y == x) || (x > y)); /* Not optimized */
+}
+
+int fpu_post_test_math6 (void)
+{
+ pinf = __builtin_inf ();
+ ninf = -__builtin_inf ();
+ NaN = __builtin_nan ("");
+
+ iuneq (ninf, pinf, 0);
+ iuneq (NaN, NaN, 1);
+ iuneq (pinf, ninf, 0);
+ iuneq (1, 4, 0);
+ iuneq (3, 3, 1);
+ iuneq (5, 2, 0);
+
+ ieq (1, 4, 0);
+ ieq (3, 3, 1);
+ ieq (5, 2, 0);
+
+ iltgt (ninf, pinf, 1);
+ iltgt (NaN, NaN, 0);
+ iltgt (pinf, ninf, 1);
+ iltgt (1, 4, 1);
+ iltgt (3, 3, 0);
+ iltgt (5, 2, 1);
+
+ ine (1, 4, 1);
+ ine (3, 3, 0);
+ ine (5, 2, 1);
+
+ iunlt (NaN, ninf, 1);
+ iunlt (pinf, NaN, 1);
+ iunlt (pinf, ninf, 0);
+ iunlt (pinf, pinf, 0);
+ iunlt (ninf, ninf, 0);
+ iunlt (1, 4, 1);
+ iunlt (3, 3, 0);
+ iunlt (5, 2, 0);
+
+ ilt (1, 4, 1);
+ ilt (3, 3, 0);
+ ilt (5, 2, 0);
+
+ iunle (NaN, ninf, 1);
+ iunle (pinf, NaN, 1);
+ iunle (pinf, ninf, 0);
+ iunle (pinf, pinf, 1);
+ iunle (ninf, ninf, 1);
+ iunle (1, 4, 1);
+ iunle (3, 3, 1);
+ iunle (5, 2, 0);
+
+ ile (1, 4, 1);
+ ile (3, 3, 1);
+ ile (5, 2, 0);
+
+ iungt (NaN, ninf, 1);
+ iungt (pinf, NaN, 1);
+ iungt (pinf, ninf, 1);
+ iungt (pinf, pinf, 0);
+ iungt (ninf, ninf, 0);
+ iungt (1, 4, 0);
+ iungt (3, 3, 0);
+ iungt (5, 2, 1);
+
+ igt (1, 4, 0);
+ igt (3, 3, 0);
+ igt (5, 2, 1);
+
+ iunge (NaN, ninf, 1);
+ iunge (pinf, NaN, 1);
+ iunge (ninf, pinf, 0);
+ iunge (pinf, pinf, 1);
+ iunge (ninf, ninf, 1);
+ iunge (1, 4, 0);
+ iunge (3, 3, 1);
+ iunge (5, 2, 1);
+
+ ige (1, 4, 0);
+ ige (3, 3, 1);
+ ige (5, 2, 1);
+
+ if (failed) {
+ post_log ("Error in FPU math6 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * FPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+#include <watchdog.h>
+
+GNU_FPOST_ATTR
+
+extern int fpu_status (void);
+extern void fpu_enable (void);
+extern void fpu_disable (void);
+
+extern int fpu_post_test_math1 (void);
+extern int fpu_post_test_math2 (void);
+extern int fpu_post_test_math3 (void);
+extern int fpu_post_test_math4 (void);
+extern int fpu_post_test_math5 (void);
+extern int fpu_post_test_math6 (void);
+extern int fpu_post_test_math7 (void);
+
+int fpu_post_test (int flags)
+{
+ int fpu = fpu_status ();
+
+ int ret = 0;
+
+ WATCHDOG_RESET ();
+
+ if (!fpu)
+ fpu_enable ();
+
+ if (ret == 0)
+ ret = fpu_post_test_math1 ();
+ if (ret == 0)
+ ret = fpu_post_test_math2 ();
+ if (ret == 0)
+ ret = fpu_post_test_math3 ();
+ if (ret == 0)
+ ret = fpu_post_test_math4 ();
+ if (ret == 0)
+ ret = fpu_post_test_math5 ();
+ if (ret == 0)
+ ret = fpu_post_test_math6 ();
+ if (ret == 0)
+ ret = fpu_post_test_math7 ();
+
+ if (!fpu)
+ fpu_disable ();
+
+ WATCHDOG_RESET ();
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ * Check that certain subnormal numbers (formerly known as denormalized
+ * numbers) are rounded to within 0.5 ulp. PR other/14354.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+union uf
+{
+ unsigned int u;
+ float f;
+};
+
+static float
+u2f (unsigned int v)
+{
+ union uf u;
+ u.u = v;
+ return u.f;
+}
+
+static unsigned int
+f2u (float v)
+{
+ union uf u;
+ u.f = v;
+ return u.u;
+}
+
+static int ok = 1;
+
+static void
+tstmul (unsigned int ux, unsigned int uy, unsigned int ur)
+{
+ float x = u2f (ux);
+ float y = u2f (uy);
+
+ if (f2u (x * y) != ur)
+ /* Set a variable rather than aborting here, to simplify tracing when
+ several computations are wrong. */
+ ok = 0;
+}
+
+/* We don't want to make this const and static, or else we risk inlining
+ causing the test to fold as constants at compile-time. */
+struct
+{
+ unsigned int p1, p2, res;
+} static volatile expected[] =
+{
+ {0xfff, 0x3f800400, 0xfff},
+ {0xf, 0x3fc88888, 0x17},
+ {0xf, 0x3f844444, 0xf}
+};
+
+int fpu_post_test_math7 (void)
+{
+ unsigned int i;
+
+ for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++)
+ {
+ tstmul (expected[i].p1, expected[i].p2, expected[i].res);
+ tstmul (expected[i].p2, expected[i].p1, expected[i].res);
+ }
+
+ if (!ok) {
+ post_log ("Error in FPU math7 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load instructions: lbz(x)(u), lhz(x)(u), lha(x)(u), lwz(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the array contents, the value of the index
+ * register and the expected value of the destination register.
+ * After executing the instruction, the test verifies the
+ * value of the destination register and the value of the base
+ * register (it must change for "load with update" instructions).
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
+extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
+
+static struct cpu_post_load_s
+{
+ ulong cmd;
+ uint width;
+ int update;
+ int index;
+ ulong offset;
+} cpu_post_load_table[] =
+{
+ {
+ OP_LWZ,
+ 4,
+ 0,
+ 0,
+ 4
+ },
+ {
+ OP_LHA,
+ 3,
+ 0,
+ 0,
+ 2
+ },
+ {
+ OP_LHZ,
+ 2,
+ 0,
+ 0,
+ 2
+ },
+ {
+ OP_LBZ,
+ 1,
+ 0,
+ 0,
+ 1
+ },
+ {
+ OP_LWZU,
+ 4,
+ 1,
+ 0,
+ 4
+ },
+ {
+ OP_LHAU,
+ 3,
+ 1,
+ 0,
+ 2
+ },
+ {
+ OP_LHZU,
+ 2,
+ 1,
+ 0,
+ 2
+ },
+ {
+ OP_LBZU,
+ 1,
+ 1,
+ 0,
+ 1
+ },
+ {
+ OP_LWZX,
+ 4,
+ 0,
+ 1,
+ 4
+ },
+ {
+ OP_LHAX,
+ 3,
+ 0,
+ 1,
+ 2
+ },
+ {
+ OP_LHZX,
+ 2,
+ 0,
+ 1,
+ 2
+ },
+ {
+ OP_LBZX,
+ 1,
+ 0,
+ 1,
+ 1
+ },
+ {
+ OP_LWZUX,
+ 4,
+ 1,
+ 1,
+ 4
+ },
+ {
+ OP_LHAUX,
+ 3,
+ 1,
+ 1,
+ 2
+ },
+ {
+ OP_LHZUX,
+ 2,
+ 1,
+ 1,
+ 2
+ },
+ {
+ OP_LBZUX,
+ 1,
+ 1,
+ 1,
+ 1
+ },
+};
+static unsigned int cpu_post_load_size =
+ sizeof (cpu_post_load_table) / sizeof (struct cpu_post_load_s);
+
+int cpu_post_test_load (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_load_size && ret == 0; i++)
+ {
+ struct cpu_post_load_s *test = cpu_post_load_table + i;
+ uchar data[16] =
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+ ulong base0 = (ulong) (data + 8);
+ ulong base = base0;
+ ulong value;
+
+ if (test->index)
+ {
+ ulong code[] =
+ {
+ ASM_12(test->cmd, 5, 3, 4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_22w (code, &base, test->offset, &value);
+ }
+ else
+ {
+ ulong code[] =
+ {
+ ASM_11I(test->cmd, 4, 3, test->offset),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_21w (code, &base, &value);
+ }
+
+ if (ret == 0)
+ {
+ if (test->update)
+ ret = base == base0 + test->offset ? 0 : -1;
+ else
+ ret = base == base0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ switch (test->width)
+ {
+ case 1:
+ ret = *(uchar *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 2:
+ ret = *(ushort *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 3:
+ ret = *(short *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ case 4:
+ ret = *(ulong *)(base0 + test->offset) == value ?
+ 0 : -1;
+ break;
+ }
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at load test %d !\n", i);
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store multiple word instructions: lmw, stmw
+ *
+ * 26 consecutive words are loaded from a source memory buffer
+ * into GPRs r6 through r31. After that, 26 consecutive words are stored
+ * from the GPRs r6 through r31 into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+
+int cpu_post_test_multi (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ if (ret == 0)
+ {
+ ulong src [26], dst [26];
+
+ ulong code[] =
+ {
+ ASM_LMW(5, 3, 0),
+ ASM_STMW(5, 4, 0),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src) / sizeof(src[0]); i ++)
+ {
+ src[i] = i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at multi test !\n");
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwimi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwimi_s
+{
+ ulong cmd;
+ ulong op0;
+ ulong op1;
+ uchar op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwimi_table[] =
+{
+ {
+ OP_RLWIMI,
+ 0xff00ffff,
+ 0x0000aa00,
+ 8,
+ 8,
+ 15,
+ 0xffaaffff
+ },
+};
+static unsigned int cpu_post_rlwimi_size =
+ sizeof (cpu_post_rlwimi_table) / sizeof (struct cpu_post_rlwimi_s);
+
+int cpu_post_test_rlwimi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwimi_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwimi_s *test = cpu_post_rlwimi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -20),
+ ASM_STW(3, stk, 8),
+ ASM_STW(4, stk, 12),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg1, stk, 8),
+ ASM_LWZ(reg0, stk, 12),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 20),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -20),
+ ASM_STW(3, stk, 8),
+ ASM_STW(4, stk, 12),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg1, stk, 8),
+ ASM_LWZ(reg0, stk, 12),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me) |
+ BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 20),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwimi test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwimi test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwinm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwinm_s
+{
+ ulong cmd;
+ ulong op1;
+ uchar op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwinm_table[] =
+{
+ {
+ OP_RLWINM,
+ 0xffff0000,
+ 24,
+ 16,
+ 23,
+ 0x0000ff00
+ },
+};
+static unsigned int cpu_post_rlwinm_size =
+ sizeof (cpu_post_rlwinm_table) / sizeof (struct cpu_post_rlwinm_s);
+
+int cpu_post_test_rlwinm (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwinm_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwinm_s *test = cpu_post_rlwinm_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_113(test->cmd, reg1, reg0, test->op2, test->mb,
+ test->me) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwinm test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwinm test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: rlwnm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwnm_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ uchar mb;
+ uchar me;
+ ulong res;
+} cpu_post_rlwnm_table[] =
+{
+ {
+ OP_RLWNM,
+ 0xffff0000,
+ 24,
+ 16,
+ 23,
+ 0x0000ff00
+ },
+};
+static unsigned int cpu_post_rlwnm_size =
+ sizeof (cpu_post_rlwnm_table) / sizeof (struct cpu_post_rlwnm_s);
+
+int cpu_post_test_rlwnm (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_rlwnm_size && ret == 0; i++)
+ {
+ struct cpu_post_rlwnm_s *test = cpu_post_rlwnm_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me) |
+ BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwnm test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at rlwnm test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions: srawi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_srawi_s
+{
+ ulong cmd;
+ ulong op1;
+ uchar op2;
+ ulong res;
+} cpu_post_srawi_table[] =
+{
+ {
+ OP_SRAWI,
+ 0x8000,
+ 3,
+ 0x1000
+ },
+ {
+ OP_SRAWI,
+ 0x80000000,
+ 3,
+ 0xf0000000
+ },
+};
+static unsigned int cpu_post_srawi_size =
+ sizeof (cpu_post_srawi_table) / sizeof (struct cpu_post_srawi_s);
+
+int cpu_post_test_srawi (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_srawi_size && ret == 0; i++)
+ {
+ struct cpu_post_srawi_s *test = cpu_post_srawi_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11S(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11S(test->cmd, reg1, reg0, test->op2) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at srawi test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at srawi test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Store instructions: stb(x)(u), sth(x)(u), stw(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the value of the index register and
+ * the value of the source register. After executing the
+ * instruction, the test verifies the contents of the array
+ * and the value of the base register (it must change for "store
+ * with update" instructions).
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);
+extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);
+
+static struct cpu_post_store_s
+{
+ ulong cmd;
+ uint width;
+ int update;
+ int index;
+ ulong offset;
+ ulong value;
+} cpu_post_store_table[] =
+{
+ {
+ OP_STW,
+ 4,
+ 0,
+ 0,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STH,
+ 2,
+ 0,
+ 0,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STB,
+ 1,
+ 0,
+ 0,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWU,
+ 4,
+ 1,
+ 0,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHU,
+ 2,
+ 1,
+ 0,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBU,
+ 1,
+ 1,
+ 0,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWX,
+ 4,
+ 0,
+ 1,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHX,
+ 2,
+ 0,
+ 1,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBX,
+ 1,
+ 0,
+ 1,
+ -1,
+ 0xff
+ },
+ {
+ OP_STWUX,
+ 4,
+ 1,
+ 1,
+ -4,
+ 0xff00ff00
+ },
+ {
+ OP_STHUX,
+ 2,
+ 1,
+ 1,
+ -2,
+ 0xff00
+ },
+ {
+ OP_STBUX,
+ 1,
+ 1,
+ 1,
+ -1,
+ 0xff
+ },
+};
+static unsigned int cpu_post_store_size =
+ sizeof (cpu_post_store_table) / sizeof (struct cpu_post_store_s);
+
+int cpu_post_test_store (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_store_size && ret == 0; i++)
+ {
+ struct cpu_post_store_s *test = cpu_post_store_table + i;
+ uchar data[16] =
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+ ulong base0 = (ulong) (data + 8);
+ ulong base = base0;
+
+ if (test->index)
+ {
+ ulong code[] =
+ {
+ ASM_12(test->cmd, 5, 3, 4),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_12w (code, &base, test->offset, test->value);
+ }
+ else
+ {
+ ulong code[] =
+ {
+ ASM_11I(test->cmd, 4, 3, test->offset),
+ ASM_BLR,
+ };
+
+ cpu_post_exec_11w (code, &base, test->value);
+ }
+
+ if (ret == 0)
+ {
+ if (test->update)
+ ret = base == base0 + test->offset ? 0 : -1;
+ else
+ ret = base == base0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ switch (test->width)
+ {
+ case 1:
+ ret = *(uchar *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ case 2:
+ ret = *(ushort *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ case 4:
+ ret = *(ulong *)(base0 + test->offset) == test->value ?
+ 0 : -1;
+ break;
+ }
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at store test %d !\n", i);
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store string instructions: lswi, stswi, lswx, stswx
+ *
+ * Several consecutive bytes from a source memory buffer are loaded
+ * left to right into GPRs. After that, the bytes are stored
+ * from the GPRs into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+extern void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3,
+ ulong op4);
+
+#include <bedbug/regs.h>
+int cpu_post_test_string (void)
+{
+ int ret = 0;
+ unsigned int i;
+ int flag = disable_interrupts();
+
+ if (ret == 0)
+ {
+ char src [31], dst [31];
+
+ ulong code[] =
+ {
+ ASM_LSWI(5, 3, 31),
+ ASM_STSWI(5, 4, 31),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src); i ++)
+ {
+ src[i] = (char) i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret == 0)
+ {
+ char src [95], dst [95];
+
+ ulong code[] =
+ {
+ ASM_LSWX(8, 3, 5),
+ ASM_STSWX(8, 4, 5),
+ ASM_BLR,
+ };
+
+ for (i = 0; i < sizeof(src); i ++)
+ {
+ src[i] = (char) i;
+ dst[i] = 0;
+ }
+
+ cpu_post_exec_04(code, (ulong)src, (ulong)dst, 0, sizeof(src));
+
+ ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+ }
+
+ if (ret != 0)
+ {
+ post_log ("Error at string test !\n");
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rD,rA,rB
+ *
+ * Arithmetic instructions: add, addc, adde, subf, subfc, subfe,
+ * mullw, mulhw, mulhwu, divw, divwu
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_three_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong res;
+} cpu_post_three_table[] =
+{
+ {
+ OP_ADD,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADD,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_ADDC,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADDC,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_ADDE,
+ 100,
+ 200,
+ 300
+ },
+ {
+ OP_ADDE,
+ 100,
+ -200,
+ -100
+ },
+ {
+ OP_SUBF,
+ 100,
+ 200,
+ 100
+ },
+ {
+ OP_SUBF,
+ 300,
+ 200,
+ -100
+ },
+ {
+ OP_SUBFC,
+ 100,
+ 200,
+ 100
+ },
+ {
+ OP_SUBFC,
+ 300,
+ 200,
+ -100
+ },
+ {
+ OP_SUBFE,
+ 100,
+ 200,
+ 200 + ~100
+ },
+ {
+ OP_SUBFE,
+ 300,
+ 200,
+ 200 + ~300
+ },
+ {
+ OP_MULLW,
+ 200,
+ 300,
+ 200 * 300
+ },
+ {
+ OP_MULHW,
+ 0x10000000,
+ 0x10000000,
+ 0x1000000
+ },
+ {
+ OP_MULHWU,
+ 0x80000000,
+ 0x80000000,
+ 0x40000000
+ },
+ {
+ OP_DIVW,
+ -20,
+ 5,
+ -4
+ },
+ {
+ OP_DIVWU,
+ 0x8000,
+ 0x200,
+ 0x40
+ },
+};
+static unsigned int cpu_post_three_size =
+ sizeof (cpu_post_three_table) / sizeof (struct cpu_post_three_s);
+
+int cpu_post_test_three (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_three_size && ret == 0; i++)
+ {
+ struct cpu_post_three_s *test = cpu_post_three_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12(test->cmd, reg2, reg1, reg0),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12(test->cmd, reg2, reg1, reg0) | BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at three test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at three test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rA,rS,UIMM
+ *
+ * Logic instructions: ori, oris, xori, xoris
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threei_s
+{
+ ulong cmd;
+ ulong op1;
+ ushort op2;
+ ulong res;
+} cpu_post_threei_table[] =
+{
+ {
+ OP_ORI,
+ 0x80000000,
+ 0xffff,
+ 0x8000ffff
+ },
+ {
+ OP_ORIS,
+ 0x00008000,
+ 0xffff,
+ 0xffff8000
+ },
+ {
+ OP_XORI,
+ 0x8000ffff,
+ 0xffff,
+ 0x80000000
+ },
+ {
+ OP_XORIS,
+ 0x00008000,
+ 0xffff,
+ 0xffff8000
+ },
+};
+static unsigned int cpu_post_threei_size =
+ sizeof (cpu_post_threei_table) / sizeof (struct cpu_post_threei_s);
+
+int cpu_post_test_threei (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_threei_size && ret == 0; i++)
+ {
+ struct cpu_post_threei_s *test = cpu_post_threei_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11IX(test->cmd, reg1, reg0, test->op2),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threei test %d !\n", i);
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions instr rA,rS,rB
+ *
+ * Logic instructions: or, orc, xor, nand, nor, eqv
+ * Shift instructions: slw, srw, sraw
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+ ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threex_s
+{
+ ulong cmd;
+ ulong op1;
+ ulong op2;
+ ulong res;
+} cpu_post_threex_table[] =
+{
+ {
+ OP_OR,
+ 0x1234,
+ 0x5678,
+ 0x1234 | 0x5678
+ },
+ {
+ OP_ORC,
+ 0x1234,
+ 0x5678,
+ 0x1234 | ~0x5678
+ },
+ {
+ OP_XOR,
+ 0x1234,
+ 0x5678,
+ 0x1234 ^ 0x5678
+ },
+ {
+ OP_NAND,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 & 0x5678)
+ },
+ {
+ OP_NOR,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 | 0x5678)
+ },
+ {
+ OP_EQV,
+ 0x1234,
+ 0x5678,
+ ~(0x1234 ^ 0x5678)
+ },
+ {
+ OP_SLW,
+ 0x80,
+ 16,
+ 0x800000
+ },
+ {
+ OP_SLW,
+ 0x80,
+ 32,
+ 0
+ },
+ {
+ OP_SRW,
+ 0x800000,
+ 16,
+ 0x80
+ },
+ {
+ OP_SRW,
+ 0x800000,
+ 32,
+ 0
+ },
+ {
+ OP_SRAW,
+ 0x80000000,
+ 3,
+ 0xf0000000
+ },
+ {
+ OP_SRAW,
+ 0x8000,
+ 3,
+ 0x1000
+ },
+};
+static unsigned int cpu_post_threex_size =
+ sizeof (cpu_post_threex_table) / sizeof (struct cpu_post_threex_s);
+
+int cpu_post_test_threex (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_threex_size && ret == 0; i++)
+ {
+ struct cpu_post_threex_s *test = cpu_post_threex_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int reg2 = (reg + 2) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12X(test->cmd, reg2, reg1, reg0),
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -24),
+ ASM_STW(3, stk, 12),
+ ASM_STW(4, stk, 16),
+ ASM_STW(reg0, stk, 8),
+ ASM_STW(reg1, stk, 4),
+ ASM_STW(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 12),
+ ASM_LWZ(reg0, stk, 16),
+ ASM_12X(test->cmd, reg2, reg1, reg0) | BIT_C,
+ ASM_STW(reg2, stk, 12),
+ ASM_LWZ(reg2, stk, 0),
+ ASM_LWZ(reg1, stk, 4),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_LWZ(3, stk, 12),
+ ASM_ADDI(1, stk, 24),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threex test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at threex test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions instr rD,rA
+ *
+ * Logic instructions: neg
+ * Arithmetic instructions: addme, addze, subfme, subfze
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_two_s
+{
+ ulong cmd;
+ ulong op;
+ ulong res;
+} cpu_post_two_table[] =
+{
+ {
+ OP_NEG,
+ 3,
+ -3
+ },
+ {
+ OP_NEG,
+ 5,
+ -5
+ },
+ {
+ OP_ADDME,
+ 6,
+ 5
+ },
+ {
+ OP_ADDZE,
+ 5,
+ 5
+ },
+ {
+ OP_SUBFME,
+ 6,
+ ~6 - 1
+ },
+ {
+ OP_SUBFZE,
+ 5,
+ ~5
+ },
+};
+static unsigned int cpu_post_two_size =
+ sizeof (cpu_post_two_table) / sizeof (struct cpu_post_two_s);
+
+int cpu_post_test_two (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_two_size && ret == 0; i++)
+ {
+ struct cpu_post_two_s *test = cpu_post_two_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11(test->cmd, reg1, reg0),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11(test->cmd, reg1, reg0) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at two test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at two test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions instr rA,rS
+ *
+ * Logic instructions: cntlzw
+ * Arithmetic instructions: extsb, extsh
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_twox_s
+{
+ ulong cmd;
+ ulong op;
+ ulong res;
+} cpu_post_twox_table[] =
+{
+ {
+ OP_EXTSB,
+ 3,
+ 3
+ },
+ {
+ OP_EXTSB,
+ 0xff,
+ -1
+ },
+ {
+ OP_EXTSH,
+ 3,
+ 3
+ },
+ {
+ OP_EXTSH,
+ 0xff,
+ 0xff
+ },
+ {
+ OP_EXTSH,
+ 0xffff,
+ -1
+ },
+ {
+ OP_CNTLZW,
+ 0x000fffff,
+ 12
+ },
+};
+static unsigned int cpu_post_twox_size =
+ sizeof (cpu_post_twox_table) / sizeof (struct cpu_post_twox_s);
+
+int cpu_post_test_twox (void)
+{
+ int ret = 0;
+ unsigned int i, reg;
+ int flag = disable_interrupts();
+
+ for (i = 0; i < cpu_post_twox_size && ret == 0; i++)
+ {
+ struct cpu_post_twox_s *test = cpu_post_twox_table + i;
+
+ for (reg = 0; reg < 32 && ret == 0; reg++)
+ {
+ unsigned int reg0 = (reg + 0) % 32;
+ unsigned int reg1 = (reg + 1) % 32;
+ unsigned int stk = reg < 16 ? 31 : 15;
+ unsigned long code[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11X(test->cmd, reg1, reg0),
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ unsigned long codecr[] =
+ {
+ ASM_STW(stk, 1, -4),
+ ASM_ADDI(stk, 1, -16),
+ ASM_STW(3, stk, 8),
+ ASM_STW(reg0, stk, 4),
+ ASM_STW(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 8),
+ ASM_11X(test->cmd, reg1, reg0) | BIT_C,
+ ASM_STW(reg1, stk, 8),
+ ASM_LWZ(reg1, stk, 0),
+ ASM_LWZ(reg0, stk, 4),
+ ASM_LWZ(3, stk, 8),
+ ASM_ADDI(1, stk, 16),
+ ASM_LWZ(stk, 1, -4),
+ ASM_BLR,
+ };
+ ulong res;
+ ulong cr;
+
+ if (ret == 0)
+ {
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op);
+
+ ret = res == test->res && cr == 0 ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at twox test %d !\n", i);
+ }
+ }
+
+ if (ret == 0)
+ {
+ cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+ ret = res == test->res &&
+ (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+ if (ret != 0)
+ {
+ post_log ("Error at twox test %d !\n", i);
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ret;
+}
+
+#endif
+++ /dev/null
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-include $(TOPDIR)/config.mk
-
-LIB = libpostppc.a
-
-AOBJS-$(CONFIG_HAS_POST) += asm.o
-COBJS-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
-COBJS-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
-COBJS-$(CONFIG_HAS_POST) += store.o load.o cr.o b.o multi.o string.o complex.o
-
-include $(TOPDIR)/post/rules.mk
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Logic instructions: andi., andis.
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_andi_s
-{
- ulong cmd;
- ulong op1;
- ushort op2;
- ulong res;
-} cpu_post_andi_table[] =
-{
- {
- OP_ANDI_,
- 0x80008000,
- 0xffff,
- 0x00008000
- },
- {
- OP_ANDIS_,
- 0x80008000,
- 0xffff,
- 0x80000000
- },
-};
-static unsigned int cpu_post_andi_size =
- sizeof (cpu_post_andi_table) / sizeof (struct cpu_post_andi_s);
-
-int cpu_post_test_andi (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_andi_size && ret == 0; i++)
- {
- struct cpu_post_andi_s *test = cpu_post_andi_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11IX(test->cmd, reg1, reg0, test->op2),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- cpu_post_exec_21 (codecr, & cr, & res, test->op1);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at andi test %d !\n", i);
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#include <post.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-/* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
- .global cpu_post_exec_02
-cpu_post_exec_02:
- isync
- mflr r0
- stwu r0, -4(r1)
-
- subi r1, r1, 104
- stmw r6, 0(r1)
-
- mtlr r3
- mr r3, r4
- mr r4, r5
- blrl
-
- lmw r6, 0(r1)
- addi r1, r1, 104
-
- lwz r0, 0(r1)
- addi r1, r1, 4
- mtlr r0
- blr
-
-/* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
- .global cpu_post_exec_04
-cpu_post_exec_04:
- isync
- mflr r0
- stwu r0, -4(r1)
-
- subi r1, r1, 96
- stmw r8, 0(r1)
-
- mtlr r3
- mr r3, r4
- mr r4, r5
- mr r5, r6
- mtxer r7
- blrl
-
- lmw r8, 0(r1)
- addi r1, r1, 96
-
- lwz r0, 0(r1)
- addi r1, r1, 4
- mtlr r0
- blr
-
-/* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
- .global cpu_post_exec_12
-cpu_post_exec_12:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
-
- mtlr r3
- mr r3, r5
- mr r4, r6
- blrl
-
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 4(r1)
- addi r1, r1, 8
- mtlr r0
- blr
-
-/* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
- .global cpu_post_exec_11
-cpu_post_exec_11:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
-
- mtlr r3
- mr r3, r5
- blrl
-
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 4(r1)
- addi r1, r1, 8
- mtlr r0
- blr
-
-/* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
- .global cpu_post_exec_21
-cpu_post_exec_21:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r5, -4(r1)
-
- li r0, 0
- mtxer r0
- lwz r0, 0(r4)
- mtcr r0
-
- mtlr r3
- mr r3, r6
- blrl
-
- mfcr r0
- lwz r4, 4(r1)
- stw r0, 0(r4)
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 8(r1)
- addi r1, r1, 12
- mtlr r0
- blr
-
-/* void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
- ulong op2); */
- .global cpu_post_exec_22
-cpu_post_exec_22:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r5, -4(r1)
-
- li r0, 0
- mtxer r0
- lwz r0, 0(r4)
- mtcr r0
-
- mtlr r3
- mr r3, r6
- mr r4, r7
- blrl
-
- mfcr r0
- lwz r4, 4(r1)
- stw r0, 0(r4)
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 8(r1)
- addi r1, r1, 12
- mtlr r0
- blr
-
-/* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
- .global cpu_post_exec_12w
-cpu_post_exec_12w:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
-
- mtlr r3
- lwz r3, 0(r4)
- mr r4, r5
- mr r5, r6
- blrl
-
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 4(r1)
- addi r1, r1, 8
- mtlr r0
- blr
-
-/* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
- .global cpu_post_exec_11w
-cpu_post_exec_11w:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
-
- mtlr r3
- lwz r3, 0(r4)
- mr r4, r5
- blrl
-
- lwz r4, 0(r1)
- stw r3, 0(r4)
-
- lwz r0, 4(r1)
- addi r1, r1, 8
- mtlr r0
- blr
-
-/* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
- .global cpu_post_exec_22w
-cpu_post_exec_22w:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r6, -4(r1)
-
- mtlr r3
- lwz r3, 0(r4)
- mr r4, r5
- blrl
-
- lwz r4, 4(r1)
- stw r3, 0(r4)
- lwz r4, 0(r1)
- stw r5, 0(r4)
-
- lwz r0, 8(r1)
- addi r1, r1, 12
- mtlr r0
- blr
-
-/* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
- .global cpu_post_exec_21w
-cpu_post_exec_21w:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r5, -4(r1)
-
- mtlr r3
- lwz r3, 0(r4)
- blrl
-
- lwz r5, 4(r1)
- stw r3, 0(r5)
- lwz r5, 0(r1)
- stw r4, 0(r5)
-
- lwz r0, 8(r1)
- addi r1, r1, 12
- mtlr r0
- blr
-
-/* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
- .global cpu_post_exec_21x
-cpu_post_exec_21x:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r5, -4(r1)
-
- mtlr r3
- mr r3, r6
- blrl
-
- lwz r5, 4(r1)
- stw r3, 0(r5)
- lwz r5, 0(r1)
- stw r4, 0(r5)
-
- lwz r0, 8(r1)
- addi r1, r1, 12
- mtlr r0
- blr
-
-/* void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
- ulong cr); */
- .global cpu_post_exec_31
-cpu_post_exec_31:
- isync
- mflr r0
- stwu r0, -4(r1)
- stwu r4, -4(r1)
- stwu r5, -4(r1)
- stwu r6, -4(r1)
-
- mtlr r3
- lwz r3, 0(r4)
- lwz r4, 0(r5)
- mr r6, r7
-
- mfcr r7
- blrl
- mtcr r7
-
- lwz r7, 8(r1)
- stw r3, 0(r7)
- lwz r7, 4(r1)
- stw r4, 0(r7)
- lwz r7, 0(r1)
- stw r5, 0(r7)
-
- lwz r0, 12(r1)
- addi r1, r1, 16
- mtlr r0
- blr
-
-/* int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n); */
- .global cpu_post_complex_1_asm
-cpu_post_complex_1_asm:
- li r9,0
- cmpw r9,r7
- bge cpu_post_complex_1_done
- mtctr r7
-cpu_post_complex_1_loop:
- mullw r0,r3,r4
- subf r0,r5,r0
- divw r0,r0,r6
- add r9,r9,r0
- bdnz cpu_post_complex_1_loop
-cpu_post_complex_1_done:
- mr r3,r9
- blr
-
-/* int cpu_post_complex_2_asm (int x, int n); */
- .global cpu_post_complex_2_asm
-cpu_post_complex_2_asm:
- mr. r0,r4
- mtctr r0
- mr r0,r3
- li r3,1
- li r4,1
- blelr
-cpu_post_complex_2_loop:
- mullw r3,r3,r0
- add r3,r3,r4
- bdnz cpu_post_complex_2_loop
-blr
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Branch instructions: b, bl, bc
- *
- * The first 2 instructions (b, bl) are verified by jumping
- * to a fixed address and checking whether control was transfered
- * to that very point. For the bl instruction the value of the
- * link register is checked as well (using mfspr).
- * To verify the bc instruction various combinations of the BI/BO
- * fields, the CTR and the condition register values are
- * checked. The list of such combinations is pre-built and
- * linked in U-Boot at build time.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
-extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
- ulong cr);
-
-static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
- int pjump, int decr, int link, ulong pctr, ulong cr)
-{
- int ret = 0;
- ulong lr = 0;
- ulong ctr = pctr;
- ulong jump;
-
- unsigned long code[] =
- {
- ASM_MTCR(6),
- ASM_MFLR(6),
- ASM_MTCTR(3),
- ASM_MTLR(4),
- ASM_LI(5, 1),
- ASM_3O(cmd, bo, bi, 8),
- ASM_LI(5, 0),
- ASM_MFCTR(3),
- ASM_MFLR(4),
- ASM_MTLR(6),
- ASM_BLR,
- };
-
- cpu_post_exec_31 (code, &ctr, &lr, &jump, cr);
-
- if (ret == 0)
- ret = pjump == jump ? 0 : -1;
- if (ret == 0)
- {
- if (decr)
- ret = pctr == ctr + 1 ? 0 : -1;
- else
- ret = pctr == ctr ? 0 : -1;
- }
- if (ret == 0)
- {
- if (link)
- ret = lr == (ulong) code + 24 ? 0 : -1;
- else
- ret = lr == 0 ? 0 : -1;
- }
-
- return ret;
-}
-
-int cpu_post_test_b (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- if (ret == 0)
- {
- ulong code[] =
- {
- ASM_MFLR(4),
- ASM_MTLR(3),
- ASM_B(4),
- ASM_MFLR(3),
- ASM_MTLR(4),
- ASM_BLR,
- };
- ulong res;
-
- cpu_post_exec_11 (code, &res, 0);
-
- ret = res == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at b1 test !\n");
- }
- }
-
- if (ret == 0)
- {
- ulong code[] =
- {
- ASM_MFLR(4),
- ASM_MTLR(3),
- ASM_BL(4),
- ASM_MFLR(3),
- ASM_MTLR(4),
- ASM_BLR,
- };
- ulong res;
-
- cpu_post_exec_11 (code, &res, 0);
-
- ret = res == (ulong)code + 12 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at b2 test !\n");
- }
- }
-
- if (ret == 0)
- {
- ulong cc, cd;
- int cond;
- ulong ctr;
- int link;
-
- i = 0;
-
- for (cc = 0; cc < 4 && ret == 0; cc++)
- {
- for (cd = 0; cd < 4 && ret == 0; cd++)
- {
- for (link = 0; link <= 1 && ret == 0; link++)
- {
- for (cond = 0; cond <= 1 && ret == 0; cond++)
- {
- for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
- {
- int decr = cd < 2;
- int cr = cond ? 0x80000000 : 0x00000000;
- int jumpc = cc >= 2 ||
- (cc == 0 && !cond) ||
- (cc == 1 && cond);
- int jumpd = cd >= 2 ||
- (cd == 0 && ctr != 1) ||
- (cd == 1 && ctr == 1);
- int jump = jumpc && jumpd;
-
- ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
- (cc << 3) + (cd << 1), 0, jump, decr, link,
- ctr, cr);
-
- if (ret != 0)
- {
- post_log ("Error at b3 test %d !\n", i);
- }
-
- i++;
- }
- }
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Integer compare instructions: cmpw, cmplw
- *
- * To verify these instructions the test runs them with
- * different combinations of operands, reads the condition
- * register value and compares it with the expected one.
- * The test contains a pre-built table
- * containing the description of each test case: the instruction,
- * the values of the operands, the condition field to save
- * the result in and the expected result.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2);
-
-static struct cpu_post_cmp_s
-{
- ulong cmd;
- ulong op1;
- ulong op2;
- ulong cr;
- ulong res;
-} cpu_post_cmp_table[] =
-{
- {
- OP_CMPW,
- 123,
- 123,
- 2,
- 0x02
- },
- {
- OP_CMPW,
- 123,
- 133,
- 3,
- 0x08
- },
- {
- OP_CMPW,
- 123,
- -133,
- 4,
- 0x04
- },
- {
- OP_CMPLW,
- 123,
- 123,
- 2,
- 0x02
- },
- {
- OP_CMPLW,
- 123,
- -133,
- 3,
- 0x08
- },
- {
- OP_CMPLW,
- 123,
- 113,
- 4,
- 0x04
- },
-};
-static unsigned int cpu_post_cmp_size =
- sizeof (cpu_post_cmp_table) / sizeof (struct cpu_post_cmp_s);
-
-int cpu_post_test_cmp (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
- {
- struct cpu_post_cmp_s *test = cpu_post_cmp_table + i;
- unsigned long code[] =
- {
- ASM_2C(test->cmd, test->cr, 3, 4),
- ASM_MFCR(3),
- ASM_BLR
- };
- ulong res;
-
- cpu_post_exec_12 (code, & res, test->op1, test->op2);
-
- ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cmp test %d !\n", i);
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Integer compare instructions: cmpwi, cmplwi
- *
- * To verify these instructions the test runs them with
- * different combinations of operands, reads the condition
- * register value and compares it with the expected one.
- * The test contains a pre-built table
- * containing the description of each test case: the instruction,
- * the values of the operands, the condition field to save
- * the result in and the expected result.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
-
-static struct cpu_post_cmpi_s
-{
- ulong cmd;
- ulong op1;
- ushort op2;
- ulong cr;
- ulong res;
-} cpu_post_cmpi_table[] =
-{
- {
- OP_CMPWI,
- 123,
- 123,
- 2,
- 0x02
- },
- {
- OP_CMPWI,
- 123,
- 133,
- 3,
- 0x08
- },
- {
- OP_CMPWI,
- 123,
- -133,
- 4,
- 0x04
- },
- {
- OP_CMPLWI,
- 123,
- 123,
- 2,
- 0x02
- },
- {
- OP_CMPLWI,
- 123,
- -133,
- 3,
- 0x08
- },
- {
- OP_CMPLWI,
- 123,
- 113,
- 4,
- 0x04
- },
-};
-static unsigned int cpu_post_cmpi_size =
- sizeof (cpu_post_cmpi_table) / sizeof (struct cpu_post_cmpi_s);
-
-int cpu_post_test_cmpi (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
- {
- struct cpu_post_cmpi_s *test = cpu_post_cmpi_table + i;
- unsigned long code[] =
- {
- ASM_1IC(test->cmd, test->cr, 3, test->op2),
- ASM_MFCR(3),
- ASM_BLR
- };
- ulong res;
-
- cpu_post_exec_11 (code, & res, test->op1);
-
- ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cmpi test %d !\n", i);
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Complex calculations
- *
- * The calculations in this test are just a combination of simpler
- * calculations, but probably under different timing conditions, etc.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n);
-extern int cpu_post_complex_2_asm (int x, int n);
-
- /*
- * n
- * SUM (a1 * a2 - a3) / a4 = n * result
- * i=1
- */
-static int cpu_post_test_complex_1 (void)
-{
- int a1 = 666;
- int a2 = 667;
- int a3 = 668;
- int a4 = 66;
- int n = 100;
- int result = 6720; /* (a1 * a2 - a3) / a4 */
-
- if (cpu_post_complex_1_asm(a1, a2, a3, a4, n) != n * result)
- {
- return -1;
- }
-
- return 0;
-}
-
- /* (1 + x + x^2 + ... + x^n) * (1 - x) = 1 - x^(n+1)
- */
-static int cpu_post_test_complex_2 (void)
-{
- int ret = -1;
- int x;
- int n;
- int k;
- int left;
- int right;
-
- for (x = -8; x <= 8; x ++)
- {
- n = 9;
-
- left = cpu_post_complex_2_asm(x, n);
- left *= 1 - x;
-
- right = 1;
- for (k = 0; k <= n; k ++)
- {
- right *= x;
- }
- right = 1 - right;
-
- if (left != right)
- {
- goto Done;
- }
- }
-
- ret = 0;
- Done:
-
- return ret;
-}
-
-int cpu_post_test_complex (void)
-{
- int ret = 0;
- int flag = disable_interrupts();
-
- if (ret == 0)
- {
- ret = cpu_post_test_complex_1();
- }
-
- if (ret == 0)
- {
- ret = cpu_post_test_complex_2();
- }
-
- if (ret != 0)
- {
- post_log ("Error at complex test !\n");
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- *
- * This test checks the arithmetic logic unit (ALU) of CPU.
- * It tests independently various groups of instructions using
- * run-time modification of the code to reduce the memory footprint.
- * For more details refer to post/cpu/ *.c files.
- */
-
-#include <watchdog.h>
-#include <post.h>
-#include <asm/mmu.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern int cpu_post_test_cmp (void);
-extern int cpu_post_test_cmpi (void);
-extern int cpu_post_test_two (void);
-extern int cpu_post_test_twox (void);
-extern int cpu_post_test_three (void);
-extern int cpu_post_test_threex (void);
-extern int cpu_post_test_threei (void);
-extern int cpu_post_test_andi (void);
-extern int cpu_post_test_srawi (void);
-extern int cpu_post_test_rlwnm (void);
-extern int cpu_post_test_rlwinm (void);
-extern int cpu_post_test_rlwimi (void);
-extern int cpu_post_test_store (void);
-extern int cpu_post_test_load (void);
-extern int cpu_post_test_cr (void);
-extern int cpu_post_test_b (void);
-extern int cpu_post_test_multi (void);
-extern int cpu_post_test_string (void);
-extern int cpu_post_test_complex (void);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ulong cpu_post_makecr (long v)
-{
- ulong cr = 0;
-
- if (v < 0)
- cr |= 0x80000000;
- if (v > 0)
- cr |= 0x40000000;
- if (v == 0)
- cr |= 0x20000000;
-
- return cr;
-}
-
-int cpu_post_test (int flags)
-{
- int ic = icache_status ();
- int ret = 0;
-
- WATCHDOG_RESET();
- if (ic)
- icache_disable ();
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
-
- if (ret == 0)
- ret = cpu_post_test_cmp ();
- if (ret == 0)
- ret = cpu_post_test_cmpi ();
- if (ret == 0)
- ret = cpu_post_test_two ();
- if (ret == 0)
- ret = cpu_post_test_twox ();
- WATCHDOG_RESET();
- if (ret == 0)
- ret = cpu_post_test_three ();
- if (ret == 0)
- ret = cpu_post_test_threex ();
- if (ret == 0)
- ret = cpu_post_test_threei ();
- if (ret == 0)
- ret = cpu_post_test_andi ();
- WATCHDOG_RESET();
- if (ret == 0)
- ret = cpu_post_test_srawi ();
- if (ret == 0)
- ret = cpu_post_test_rlwnm ();
- if (ret == 0)
- ret = cpu_post_test_rlwinm ();
- if (ret == 0)
- ret = cpu_post_test_rlwimi ();
- WATCHDOG_RESET();
- if (ret == 0)
- ret = cpu_post_test_store ();
- if (ret == 0)
- ret = cpu_post_test_load ();
- if (ret == 0)
- ret = cpu_post_test_cr ();
- if (ret == 0)
- ret = cpu_post_test_b ();
- WATCHDOG_RESET();
- if (ret == 0)
- ret = cpu_post_test_multi ();
- WATCHDOG_RESET();
- if (ret == 0)
- ret = cpu_post_test_string ();
- if (ret == 0)
- ret = cpu_post_test_complex ();
- WATCHDOG_RESET();
-
- if (ic)
- icache_enable ();
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
-
- WATCHDOG_RESET();
-
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_CPU */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _CPU_ASM_H
-#define _CPU_ASM_H
-
-#define BIT_C 0x00000001
-
-#define OP_BLR 0x4e800020
-#define OP_EXTSB 0x7c000774
-#define OP_EXTSH 0x7c000734
-#define OP_NEG 0x7c0000d0
-#define OP_CNTLZW 0x7c000034
-#define OP_ADD 0x7c000214
-#define OP_ADDC 0x7c000014
-#define OP_ADDME 0x7c0001d4
-#define OP_ADDZE 0x7c000194
-#define OP_ADDE 0x7c000114
-#define OP_ADDI 0x38000000
-#define OP_SUBF 0x7c000050
-#define OP_SUBFC 0x7c000010
-#define OP_SUBFE 0x7c000110
-#define OP_SUBFME 0x7c0001d0
-#define OP_SUBFZE 0x7c000190
-#define OP_MFCR 0x7c000026
-#define OP_MTCR 0x7c0ff120
-#define OP_MFXER 0x7c0102a6
-#define OP_MTXER 0x7c0103a6
-#define OP_MCRXR 0x7c000400
-#define OP_MCRF 0x4c000000
-#define OP_CRAND 0x4c000202
-#define OP_CRANDC 0x4c000102
-#define OP_CROR 0x4c000382
-#define OP_CRORC 0x4c000342
-#define OP_CRXOR 0x4c000182
-#define OP_CRNAND 0x4c0001c2
-#define OP_CRNOR 0x4c000042
-#define OP_CREQV 0x4c000242
-#define OP_CMPW 0x7c000000
-#define OP_CMPLW 0x7c000040
-#define OP_CMPWI 0x2c000000
-#define OP_CMPLWI 0x28000000
-#define OP_MULLW 0x7c0001d6
-#define OP_MULHW 0x7c000096
-#define OP_MULHWU 0x7c000016
-#define OP_DIVW 0x7c0003d6
-#define OP_DIVWU 0x7c000396
-#define OP_OR 0x7c000378
-#define OP_ORC 0x7c000338
-#define OP_XOR 0x7c000278
-#define OP_NAND 0x7c0003b8
-#define OP_NOR 0x7c0000f8
-#define OP_EQV 0x7c000238
-#define OP_SLW 0x7c000030
-#define OP_SRW 0x7c000430
-#define OP_SRAW 0x7c000630
-#define OP_ORI 0x60000000
-#define OP_ORIS 0x64000000
-#define OP_XORI 0x68000000
-#define OP_XORIS 0x6c000000
-#define OP_ANDI_ 0x70000000
-#define OP_ANDIS_ 0x74000000
-#define OP_SRAWI 0x7c000670
-#define OP_RLWINM 0x54000000
-#define OP_RLWNM 0x5c000000
-#define OP_RLWIMI 0x50000000
-#define OP_LWZ 0x80000000
-#define OP_LHZ 0xa0000000
-#define OP_LHA 0xa8000000
-#define OP_LBZ 0x88000000
-#define OP_LWZU 0x84000000
-#define OP_LHZU 0xa4000000
-#define OP_LHAU 0xac000000
-#define OP_LBZU 0x8c000000
-#define OP_LWZX 0x7c00002e
-#define OP_LHZX 0x7c00022e
-#define OP_LHAX 0x7c0002ae
-#define OP_LBZX 0x7c0000ae
-#define OP_LWZUX 0x7c00006e
-#define OP_LHZUX 0x7c00026e
-#define OP_LHAUX 0x7c0002ee
-#define OP_LBZUX 0x7c0000ee
-#define OP_STW 0x90000000
-#define OP_STH 0xb0000000
-#define OP_STB 0x98000000
-#define OP_STWU 0x94000000
-#define OP_STHU 0xb4000000
-#define OP_STBU 0x9c000000
-#define OP_STWX 0x7c00012e
-#define OP_STHX 0x7c00032e
-#define OP_STBX 0x7c0001ae
-#define OP_STWUX 0x7c00016e
-#define OP_STHUX 0x7c00036e
-#define OP_STBUX 0x7c0001ee
-#define OP_B 0x48000000
-#define OP_BL 0x48000001
-#define OP_BC 0x40000000
-#define OP_BCL 0x40000001
-#define OP_MTLR 0x7c0803a6
-#define OP_MFLR 0x7c0802a6
-#define OP_MTCTR 0x7c0903a6
-#define OP_MFCTR 0x7c0902a6
-#define OP_LMW 0xb8000000
-#define OP_STMW 0xbc000000
-#define OP_LSWI 0x7c0004aa
-#define OP_LSWX 0x7c00042a
-#define OP_STSWI 0x7c0005aa
-#define OP_STSWX 0x7c00052a
-
-#define ASM_0(opcode) (opcode)
-#define ASM_1(opcode, rd) ((opcode) + \
- ((rd) << 21))
-#define ASM_1C(opcode, cr) ((opcode) + \
- ((cr) << 23))
-#define ASM_11(opcode, rd, rs) ((opcode) + \
- ((rd) << 21) + \
- ((rs) << 16))
-#define ASM_11C(opcode, cd, cs) ((opcode) + \
- ((cd) << 23) + \
- ((cs) << 18))
-#define ASM_11X(opcode, rd, rs) ((opcode) + \
- ((rs) << 21) + \
- ((rd) << 16))
-#define ASM_11I(opcode, rd, rs, simm) ((opcode) + \
- ((rd) << 21) + \
- ((rs) << 16) + \
- ((simm) & 0xffff))
-#define ASM_11IF(opcode, rd, rs, simm) ((opcode) + \
- ((rd) << 21) + \
- ((rs) << 16) + \
- ((simm) << 11))
-#define ASM_11S(opcode, rd, rs, sh) ((opcode) + \
- ((rs) << 21) + \
- ((rd) << 16) + \
- ((sh) << 11))
-#define ASM_11IX(opcode, rd, rs, imm) ((opcode) + \
- ((rs) << 21) + \
- ((rd) << 16) + \
- ((imm) & 0xffff))
-#define ASM_12(opcode, rd, rs1, rs2) ((opcode) + \
- ((rd) << 21) + \
- ((rs1) << 16) + \
- ((rs2) << 11))
-#define ASM_12F(opcode, fd, fs1, fs2) ((opcode) + \
- ((fd) << 21) + \
- ((fs1) << 16) + \
- ((fs2) << 11))
-#define ASM_12X(opcode, rd, rs1, rs2) ((opcode) + \
- ((rs1) << 21) + \
- ((rd) << 16) + \
- ((rs2) << 11))
-#define ASM_2C(opcode, cr, rs1, rs2) ((opcode) + \
- ((cr) << 23) + \
- ((rs1) << 16) + \
- ((rs2) << 11))
-#define ASM_1IC(opcode, cr, rs, imm) ((opcode) + \
- ((cr) << 23) + \
- ((rs) << 16) + \
- ((imm) & 0xffff))
-#define ASM_122(opcode, rd, rs1, rs2, imm1, imm2) \
- ((opcode) + \
- ((rs1) << 21) + \
- ((rd) << 16) + \
- ((rs2) << 11) + \
- ((imm1) << 6) + \
- ((imm2) << 1))
-#define ASM_113(opcode, rd, rs, imm1, imm2, imm3) \
- ((opcode) + \
- ((rs) << 21) + \
- ((rd) << 16) + \
- ((imm1) << 11) + \
- ((imm2) << 6) + \
- ((imm3) << 1))
-#define ASM_1O(opcode, off) ((opcode) + (off))
-#define ASM_3O(opcode, bo, bi, off) ((opcode) + \
- ((bo) << 21) + \
- ((bi) << 16) + \
- (off))
-
-#define ASM_ADDI(rd, rs, simm) ASM_11I(OP_ADDI, rd, rs, simm)
-#define ASM_BLR ASM_0(OP_BLR)
-#define ASM_STW(rd, rs, simm) ASM_11I(OP_STW, rd, rs, simm)
-#define ASM_LWZ(rd, rs, simm) ASM_11I(OP_LWZ, rd, rs, simm)
-#define ASM_MFCR(rd) ASM_1(OP_MFCR, rd)
-#define ASM_MTCR(rd) ASM_1(OP_MTCR, rd)
-#define ASM_MFXER(rd) ASM_1(OP_MFXER, rd)
-#define ASM_MTXER(rd) ASM_1(OP_MTXER, rd)
-#define ASM_MFCTR(rd) ASM_1(OP_MFCTR, rd)
-#define ASM_MTCTR(rd) ASM_1(OP_MTCTR, rd)
-#define ASM_MCRXR(cr) ASM_1C(OP_MCRXR, cr)
-#define ASM_MCRF(cd, cs) ASM_11C(OP_MCRF, cd, cs)
-#define ASM_B(off) ASM_1O(OP_B, off)
-#define ASM_BL(off) ASM_1O(OP_BL, off)
-#define ASM_MFLR(rd) ASM_1(OP_MFLR, rd)
-#define ASM_MTLR(rd) ASM_1(OP_MTLR, rd)
-#define ASM_LI(rd, imm) ASM_ADDI(rd, 0, imm)
-#define ASM_LMW(rd, rs, simm) ASM_11I(OP_LMW, rd, rs, simm)
-#define ASM_STMW(rd, rs, simm) ASM_11I(OP_STMW, rd, rs, simm)
-#define ASM_LSWI(rd, rs, simm) ASM_11IF(OP_LSWI, rd, rs, simm)
-#define ASM_LSWX(rd, rs1, rs2) ASM_12(OP_LSWX, rd, rs1, rs2)
-#define ASM_STSWI(rd, rs, simm) ASM_11IF(OP_STSWI, rd, rs, simm)
-#define ASM_STSWX(rd, rs1, rs2) ASM_12(OP_STSWX, rd, rs1, rs2)
-
-
-#endif /* _CPU_ASM_H */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Condition register istructions: mtcr, mfcr, mcrxr,
- * crand, crandc, cror, crorc, crxor,
- * crnand, crnor, creqv, mcrf
- *
- * The mtcrf/mfcr instructions is tested by loading different
- * values into the condition register (mtcrf), moving its value
- * to a general-purpose register (mfcr) and comparing this value
- * with the expected one.
- * The mcrxr instruction is tested by loading a fixed value
- * into the XER register (mtspr), moving XER value to the
- * condition register (mcrxr), moving it to a general-purpose
- * register (mfcr) and comparing the value of this register with
- * the expected one.
- * The rest of instructions is tested by loading a fixed
- * value into the condition register (mtcrf), executing each
- * instruction several times to modify all 4-bit condition
- * fields, moving the value of the conditional register to a
- * general-purpose register (mfcr) and comparing it with the
- * expected one.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
-extern void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3);
-
-static ulong cpu_post_cr_table1[] =
-{
- 0xaaaaaaaa,
- 0x55555555,
-};
-static unsigned int cpu_post_cr_size1 =
- sizeof (cpu_post_cr_table1) / sizeof (ulong);
-
-static struct cpu_post_cr_s2 {
- ulong xer;
- ulong cr;
-} cpu_post_cr_table2[] =
-{
- {
- 0xa0000000,
- 1
- },
- {
- 0x40000000,
- 5
- },
-};
-static unsigned int cpu_post_cr_size2 =
- sizeof (cpu_post_cr_table2) / sizeof (struct cpu_post_cr_s2);
-
-static struct cpu_post_cr_s3 {
- ulong cr;
- ulong cs;
- ulong cd;
- ulong res;
-} cpu_post_cr_table3[] =
-{
- {
- 0x01234567,
- 0,
- 4,
- 0x01230567
- },
- {
- 0x01234567,
- 7,
- 0,
- 0x71234567
- },
-};
-static unsigned int cpu_post_cr_size3 =
- sizeof (cpu_post_cr_table3) / sizeof (struct cpu_post_cr_s3);
-
-static struct cpu_post_cr_s4 {
- ulong cmd;
- ulong cr;
- ulong op1;
- ulong op2;
- ulong op3;
- ulong res;
-} cpu_post_cr_table4[] =
-{
- {
- OP_CRAND,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x0000ffff
- },
- {
- OP_CRAND,
- 0x0000ffff,
- 16,
- 17,
- 0,
- 0x8000ffff
- },
- {
- OP_CRANDC,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x0000ffff
- },
- {
- OP_CRANDC,
- 0x0000ffff,
- 16,
- 0,
- 0,
- 0x8000ffff
- },
- {
- OP_CROR,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x8000ffff
- },
- {
- OP_CROR,
- 0x0000ffff,
- 0,
- 1,
- 0,
- 0x0000ffff
- },
- {
- OP_CRORC,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x0000ffff
- },
- {
- OP_CRORC,
- 0x0000ffff,
- 0,
- 0,
- 0,
- 0x8000ffff
- },
- {
- OP_CRXOR,
- 0x0000ffff,
- 0,
- 0,
- 0,
- 0x0000ffff
- },
- {
- OP_CRXOR,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x8000ffff
- },
- {
- OP_CRNAND,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x8000ffff
- },
- {
- OP_CRNAND,
- 0x0000ffff,
- 16,
- 17,
- 0,
- 0x0000ffff
- },
- {
- OP_CRNOR,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x0000ffff
- },
- {
- OP_CRNOR,
- 0x0000ffff,
- 0,
- 1,
- 0,
- 0x8000ffff
- },
- {
- OP_CREQV,
- 0x0000ffff,
- 0,
- 0,
- 0,
- 0x8000ffff
- },
- {
- OP_CREQV,
- 0x0000ffff,
- 0,
- 16,
- 0,
- 0x0000ffff
- },
-};
-static unsigned int cpu_post_cr_size4 =
- sizeof (cpu_post_cr_table4) / sizeof (struct cpu_post_cr_s4);
-
-int cpu_post_test_cr (void)
-{
- int ret = 0;
- unsigned int i;
- unsigned long cr_sav;
- int flag = disable_interrupts();
-
- asm ( "mfcr %0" : "=r" (cr_sav) : );
-
- for (i = 0; i < cpu_post_cr_size1 && ret == 0; i++)
- {
- ulong cr = cpu_post_cr_table1[i];
- ulong res;
-
- unsigned long code[] =
- {
- ASM_MTCR(3),
- ASM_MFCR(3),
- ASM_BLR,
- };
-
- cpu_post_exec_11 (code, &res, cr);
-
- ret = res == cr ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cr1 test %d !\n", i);
- }
- }
-
- for (i = 0; i < cpu_post_cr_size2 && ret == 0; i++)
- {
- struct cpu_post_cr_s2 *test = cpu_post_cr_table2 + i;
- ulong res;
- ulong xer;
-
- unsigned long code[] =
- {
- ASM_MTXER(3),
- ASM_MCRXR(test->cr),
- ASM_MFCR(3),
- ASM_MFXER(4),
- ASM_BLR,
- };
-
- cpu_post_exec_21x (code, &res, &xer, test->xer);
-
- ret = xer == 0 && ((res << (4 * test->cr)) & 0xe0000000) == test->xer ?
- 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cr2 test %d !\n", i);
- }
- }
-
- for (i = 0; i < cpu_post_cr_size3 && ret == 0; i++)
- {
- struct cpu_post_cr_s3 *test = cpu_post_cr_table3 + i;
- ulong res;
-
- unsigned long code[] =
- {
- ASM_MTCR(3),
- ASM_MCRF(test->cd, test->cs),
- ASM_MFCR(3),
- ASM_BLR,
- };
-
- cpu_post_exec_11 (code, &res, test->cr);
-
- ret = res == test->res ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cr3 test %d !\n", i);
- }
- }
-
- for (i = 0; i < cpu_post_cr_size4 && ret == 0; i++)
- {
- struct cpu_post_cr_s4 *test = cpu_post_cr_table4 + i;
- ulong res;
-
- unsigned long code[] =
- {
- ASM_MTCR(3),
- ASM_12F(test->cmd, test->op3, test->op1, test->op2),
- ASM_MFCR(3),
- ASM_BLR,
- };
-
- cpu_post_exec_11 (code, &res, test->cr);
-
- ret = res == test->res ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at cr4 test %d !\n", i);
- }
- }
-
- asm ( "mtcr %0" : : "r" (cr_sav));
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-int fpu_post_test_math1 (void)
-{
- volatile double a, *p;
- double c, d;
- volatile double b;
-
- d = 1.0;
- p = &b;
-
- do
- {
- c = d;
- d = c * 0.5;
- b = 1 + d;
- } while (b != 1.0);
-
- a = 1.0 + c;
-
- if (a == 1.0) {
- post_log ("Error in FPU math1 test\n");
- return -1;
- }
-
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-static float rintf (float x)
-{
- volatile float TWO23 = 8388608.0;
-
- if (__builtin_fabs (x) < TWO23)
- {
- if (x > 0.0)
- {
- x += TWO23;
- x -= TWO23;
- }
- else if (x < 0.0)
- {
- x = TWO23 - x;
- x = -(x - TWO23);
- }
- }
-
- return x;
-}
-
-int fpu_post_test_math2 (void)
-{
- if (rintf (-1.5) != -2.0) {
- post_log ("Error in FPU math2 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-int fpu_post_test_math3 (void)
-{
- volatile long double dfrom = 1.1;
- volatile long double m1;
- volatile long double m2;
- volatile unsigned long mant_long;
-
- m1 = dfrom / 2.0;
- m2 = m1 * 4294967296.0;
- mant_long = ((unsigned long) m2) & 0xffffffff;
-
- if (mant_long != 0x8ccccccc) {
- post_log ("Error in FPU math3 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-int fpu_post_test_math4 (void)
-{
- volatile float reale = 1.0f;
- volatile float oneplus;
- int i;
-
- if (sizeof (float) != 4)
- return 0;
-
- for (i = 0; ; i++)
- {
- oneplus = 1.0f + reale;
- if (oneplus == 1.0f)
- break;
- reale = reale / 2.0f;
- }
- /* Assumes ieee754 accurate arithmetic above. */
- if (i != 24) {
- post_log ("Error in FPU math4 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-include $(TOPDIR)/config.mk
-
-LIB = libpostppcfpu.a
-
-COBJS-$(CONFIG_HAS_POST) += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
-COBJS-$(CONFIG_HAS_POST) += acc1.o compare-fp-1.o mul-subnormal-single-1.o
-
-include $(TOPDIR)/post/rules.mk
-
-CFLAGS := $(shell echo $(CFLAGS) | sed s/-msoft-float//)
-CFLAGS += -mhard-float -fkeep-inline-functions
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-static double func (const double *array)
-{
- double d = *array;
-
- if (d == 0.0)
- return d;
- else
- return d + func (array + 1);
-}
-
-int fpu_post_test_math5 (void)
-{
- double values[] = { 0.1e-100, 1.0, -1.0, 0.0 };
-
- if (func (values) != 0.1e-100) {
- post_log ("Error in FPU math5 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * Test for correctness of composite floating-point comparisons.
- * Written by Paolo Bonzini, 26th May 2004.
- * This file is originally a part of the GCC testsuite.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-static int failed;
-
-#define TEST(c) if ((c) != ok) failed++
-#define ORD(a, b) (!__builtin_isunordered ((a), (b)))
-#define UNORD(a, b) (__builtin_isunordered ((a), (b)))
-#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b)))
-#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b)))
-#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b)))
-#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b)))
-#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b)))
-#define LTGT(a, b) (__builtin_islessgreater ((a), (b)))
-
-static float pinf;
-static float ninf;
-static float NaN;
-
-static void iuneq (float x, float y, int ok)
-{
- TEST (UNEQ (x, y));
- TEST (!LTGT (x, y));
- TEST (UNLE (x, y) && UNGE (x,y));
-}
-
-static void ieq (float x, float y, int ok)
-{
- TEST (ORD (x, y) && UNEQ (x, y));
-}
-
-static void iltgt (float x, float y, int ok)
-{
- TEST (!UNEQ (x, y)); /* Not optimizable. */
- TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */
- TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y)));
-}
-
-static void ine (float x, float y, int ok)
-{
- TEST (UNLT (x, y) || UNGT (x, y));
-}
-
-static void iunlt (float x, float y, int ok)
-{
- TEST (UNLT (x, y));
- TEST (UNORD (x, y) || (x < y));
-}
-
-static void ilt (float x, float y, int ok)
-{
- TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */
- TEST ((x <= y) && (x != y));
- TEST ((x <= y) && (y != x));
- TEST ((x != y) && (x <= y)); /* Not optimized */
- TEST ((y != x) && (x <= y)); /* Not optimized */
-}
-
-static void iunle (float x, float y, int ok)
-{
- TEST (UNLE (x, y));
- TEST (UNORD (x, y) || (x <= y));
-}
-
-static void ile (float x, float y, int ok)
-{
- TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */
- TEST ((x < y) || (x == y));
- TEST ((y > x) || (x == y));
- TEST ((x == y) || (x < y)); /* Not optimized */
- TEST ((y == x) || (x < y)); /* Not optimized */
-}
-
-static void iungt (float x, float y, int ok)
-{
- TEST (UNGT (x, y));
- TEST (UNORD (x, y) || (x > y));
-}
-
-static void igt (float x, float y, int ok)
-{
- TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */
- TEST ((x >= y) && (x != y));
- TEST ((x >= y) && (y != x));
- TEST ((x != y) && (x >= y)); /* Not optimized */
- TEST ((y != x) && (x >= y)); /* Not optimized */
-}
-
-static void iunge (float x, float y, int ok)
-{
- TEST (UNGE (x, y));
- TEST (UNORD (x, y) || (x >= y));
-}
-
-static void ige (float x, float y, int ok)
-{
- TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */
- TEST ((x > y) || (x == y));
- TEST ((y < x) || (x == y));
- TEST ((x == y) || (x > y)); /* Not optimized */
- TEST ((y == x) || (x > y)); /* Not optimized */
-}
-
-int fpu_post_test_math6 (void)
-{
- pinf = __builtin_inf ();
- ninf = -__builtin_inf ();
- NaN = __builtin_nan ("");
-
- iuneq (ninf, pinf, 0);
- iuneq (NaN, NaN, 1);
- iuneq (pinf, ninf, 0);
- iuneq (1, 4, 0);
- iuneq (3, 3, 1);
- iuneq (5, 2, 0);
-
- ieq (1, 4, 0);
- ieq (3, 3, 1);
- ieq (5, 2, 0);
-
- iltgt (ninf, pinf, 1);
- iltgt (NaN, NaN, 0);
- iltgt (pinf, ninf, 1);
- iltgt (1, 4, 1);
- iltgt (3, 3, 0);
- iltgt (5, 2, 1);
-
- ine (1, 4, 1);
- ine (3, 3, 0);
- ine (5, 2, 1);
-
- iunlt (NaN, ninf, 1);
- iunlt (pinf, NaN, 1);
- iunlt (pinf, ninf, 0);
- iunlt (pinf, pinf, 0);
- iunlt (ninf, ninf, 0);
- iunlt (1, 4, 1);
- iunlt (3, 3, 0);
- iunlt (5, 2, 0);
-
- ilt (1, 4, 1);
- ilt (3, 3, 0);
- ilt (5, 2, 0);
-
- iunle (NaN, ninf, 1);
- iunle (pinf, NaN, 1);
- iunle (pinf, ninf, 0);
- iunle (pinf, pinf, 1);
- iunle (ninf, ninf, 1);
- iunle (1, 4, 1);
- iunle (3, 3, 1);
- iunle (5, 2, 0);
-
- ile (1, 4, 1);
- ile (3, 3, 1);
- ile (5, 2, 0);
-
- iungt (NaN, ninf, 1);
- iungt (pinf, NaN, 1);
- iungt (pinf, ninf, 1);
- iungt (pinf, pinf, 0);
- iungt (ninf, ninf, 0);
- iungt (1, 4, 0);
- iungt (3, 3, 0);
- iungt (5, 2, 1);
-
- igt (1, 4, 0);
- igt (3, 3, 0);
- igt (5, 2, 1);
-
- iunge (NaN, ninf, 1);
- iunge (pinf, NaN, 1);
- iunge (ninf, pinf, 0);
- iunge (pinf, pinf, 1);
- iunge (ninf, ninf, 1);
- iunge (1, 4, 0);
- iunge (3, 3, 1);
- iunge (5, 2, 1);
-
- ige (1, 4, 0);
- ige (3, 3, 1);
- ige (5, 2, 1);
-
- if (failed) {
- post_log ("Error in FPU math6 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Author: Sergei Poselenov <sposelenov@emcraft.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * FPU test
- *
- * This test checks the arithmetic logic unit (ALU) of CPU.
- * It tests independently various groups of instructions using
- * run-time modification of the code to reduce the memory footprint.
- * For more details refer to post/cpu/ *.c files.
- */
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-#include <watchdog.h>
-
-GNU_FPOST_ATTR
-
-extern int fpu_status (void);
-extern void fpu_enable (void);
-extern void fpu_disable (void);
-
-extern int fpu_post_test_math1 (void);
-extern int fpu_post_test_math2 (void);
-extern int fpu_post_test_math3 (void);
-extern int fpu_post_test_math4 (void);
-extern int fpu_post_test_math5 (void);
-extern int fpu_post_test_math6 (void);
-extern int fpu_post_test_math7 (void);
-
-int fpu_post_test (int flags)
-{
- int fpu = fpu_status ();
-
- int ret = 0;
-
- WATCHDOG_RESET ();
-
- if (!fpu)
- fpu_enable ();
-
- if (ret == 0)
- ret = fpu_post_test_math1 ();
- if (ret == 0)
- ret = fpu_post_test_math2 ();
- if (ret == 0)
- ret = fpu_post_test_math3 ();
- if (ret == 0)
- ret = fpu_post_test_math4 ();
- if (ret == 0)
- ret = fpu_post_test_math5 ();
- if (ret == 0)
- ret = fpu_post_test_math6 ();
- if (ret == 0)
- ret = fpu_post_test_math7 ();
-
- if (!fpu)
- fpu_disable ();
-
- WATCHDOG_RESET ();
-
- return ret;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * Copyright (C) 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * This file is originally a part of the GCC testsuite.
- * Check that certain subnormal numbers (formerly known as denormalized
- * numbers) are rounded to within 0.5 ulp. PR other/14354.
- */
-
-#include <common.h>
-
-#include <post.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_FPU
-
-GNU_FPOST_ATTR
-
-union uf
-{
- unsigned int u;
- float f;
-};
-
-static float
-u2f (unsigned int v)
-{
- union uf u;
- u.u = v;
- return u.f;
-}
-
-static unsigned int
-f2u (float v)
-{
- union uf u;
- u.f = v;
- return u.u;
-}
-
-static int ok = 1;
-
-static void
-tstmul (unsigned int ux, unsigned int uy, unsigned int ur)
-{
- float x = u2f (ux);
- float y = u2f (uy);
-
- if (f2u (x * y) != ur)
- /* Set a variable rather than aborting here, to simplify tracing when
- several computations are wrong. */
- ok = 0;
-}
-
-/* We don't want to make this const and static, or else we risk inlining
- causing the test to fold as constants at compile-time. */
-struct
-{
- unsigned int p1, p2, res;
-} static volatile expected[] =
-{
- {0xfff, 0x3f800400, 0xfff},
- {0xf, 0x3fc88888, 0x17},
- {0xf, 0x3f844444, 0xf}
-};
-
-int fpu_post_test_math7 (void)
-{
- unsigned int i;
-
- for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++)
- {
- tstmul (expected[i].p1, expected[i].p2, expected[i].res);
- tstmul (expected[i].p2, expected[i].p1, expected[i].res);
- }
-
- if (!ok) {
- post_log ("Error in FPU math7 test\n");
- return -1;
- }
- return 0;
-}
-
-#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Load instructions: lbz(x)(u), lhz(x)(u), lha(x)(u), lwz(x)(u)
- *
- * All operations are performed on a 16-byte array. The array
- * is 4-byte aligned. The base register points to offset 8.
- * The immediate offset (index register) ranges in [-8 ... +7].
- * The test cases are composed so that they do not
- * cause alignment exceptions.
- * The test contains a pre-built table describing all test cases.
- * The table entry contains:
- * the instruction opcode, the array contents, the value of the index
- * register and the expected value of the destination register.
- * After executing the instruction, the test verifies the
- * value of the destination register and the value of the base
- * register (it must change for "load with update" instructions).
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
-extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
-
-static struct cpu_post_load_s
-{
- ulong cmd;
- uint width;
- int update;
- int index;
- ulong offset;
-} cpu_post_load_table[] =
-{
- {
- OP_LWZ,
- 4,
- 0,
- 0,
- 4
- },
- {
- OP_LHA,
- 3,
- 0,
- 0,
- 2
- },
- {
- OP_LHZ,
- 2,
- 0,
- 0,
- 2
- },
- {
- OP_LBZ,
- 1,
- 0,
- 0,
- 1
- },
- {
- OP_LWZU,
- 4,
- 1,
- 0,
- 4
- },
- {
- OP_LHAU,
- 3,
- 1,
- 0,
- 2
- },
- {
- OP_LHZU,
- 2,
- 1,
- 0,
- 2
- },
- {
- OP_LBZU,
- 1,
- 1,
- 0,
- 1
- },
- {
- OP_LWZX,
- 4,
- 0,
- 1,
- 4
- },
- {
- OP_LHAX,
- 3,
- 0,
- 1,
- 2
- },
- {
- OP_LHZX,
- 2,
- 0,
- 1,
- 2
- },
- {
- OP_LBZX,
- 1,
- 0,
- 1,
- 1
- },
- {
- OP_LWZUX,
- 4,
- 1,
- 1,
- 4
- },
- {
- OP_LHAUX,
- 3,
- 1,
- 1,
- 2
- },
- {
- OP_LHZUX,
- 2,
- 1,
- 1,
- 2
- },
- {
- OP_LBZUX,
- 1,
- 1,
- 1,
- 1
- },
-};
-static unsigned int cpu_post_load_size =
- sizeof (cpu_post_load_table) / sizeof (struct cpu_post_load_s);
-
-int cpu_post_test_load (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_load_size && ret == 0; i++)
- {
- struct cpu_post_load_s *test = cpu_post_load_table + i;
- uchar data[16] =
- { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
- ulong base0 = (ulong) (data + 8);
- ulong base = base0;
- ulong value;
-
- if (test->index)
- {
- ulong code[] =
- {
- ASM_12(test->cmd, 5, 3, 4),
- ASM_BLR,
- };
-
- cpu_post_exec_22w (code, &base, test->offset, &value);
- }
- else
- {
- ulong code[] =
- {
- ASM_11I(test->cmd, 4, 3, test->offset),
- ASM_BLR,
- };
-
- cpu_post_exec_21w (code, &base, &value);
- }
-
- if (ret == 0)
- {
- if (test->update)
- ret = base == base0 + test->offset ? 0 : -1;
- else
- ret = base == base0 ? 0 : -1;
- }
-
- if (ret == 0)
- {
- switch (test->width)
- {
- case 1:
- ret = *(uchar *)(base0 + test->offset) == value ?
- 0 : -1;
- break;
- case 2:
- ret = *(ushort *)(base0 + test->offset) == value ?
- 0 : -1;
- break;
- case 3:
- ret = *(short *)(base0 + test->offset) == value ?
- 0 : -1;
- break;
- case 4:
- ret = *(ulong *)(base0 + test->offset) == value ?
- 0 : -1;
- break;
- }
- }
-
- if (ret != 0)
- {
- post_log ("Error at load test %d !\n", i);
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Load/store multiple word instructions: lmw, stmw
- *
- * 26 consecutive words are loaded from a source memory buffer
- * into GPRs r6 through r31. After that, 26 consecutive words are stored
- * from the GPRs r6 through r31 into a target memory buffer. The contents
- * of the source and target buffers are then compared.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
-
-int cpu_post_test_multi (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- if (ret == 0)
- {
- ulong src [26], dst [26];
-
- ulong code[] =
- {
- ASM_LMW(5, 3, 0),
- ASM_STMW(5, 4, 0),
- ASM_BLR,
- };
-
- for (i = 0; i < sizeof(src) / sizeof(src[0]); i ++)
- {
- src[i] = i;
- dst[i] = 0;
- }
-
- cpu_post_exec_02(code, (ulong)src, (ulong)dst);
-
- ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
- }
-
- if (ret != 0)
- {
- post_log ("Error at multi test !\n");
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Shift instructions: rlwimi
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
- ulong op2);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_rlwimi_s
-{
- ulong cmd;
- ulong op0;
- ulong op1;
- uchar op2;
- uchar mb;
- uchar me;
- ulong res;
-} cpu_post_rlwimi_table[] =
-{
- {
- OP_RLWIMI,
- 0xff00ffff,
- 0x0000aa00,
- 8,
- 8,
- 15,
- 0xffaaffff
- },
-};
-static unsigned int cpu_post_rlwimi_size =
- sizeof (cpu_post_rlwimi_table) / sizeof (struct cpu_post_rlwimi_s);
-
-int cpu_post_test_rlwimi (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_rlwimi_size && ret == 0; i++)
- {
- struct cpu_post_rlwimi_s *test = cpu_post_rlwimi_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -20),
- ASM_STW(3, stk, 8),
- ASM_STW(4, stk, 12),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg1, stk, 8),
- ASM_LWZ(reg0, stk, 12),
- ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 20),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -20),
- ASM_STW(3, stk, 8),
- ASM_STW(4, stk, 12),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg1, stk, 8),
- ASM_LWZ(reg0, stk, 12),
- ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me) |
- BIT_C,
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 20),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwimi test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwimi test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Shift instructions: rlwinm
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_rlwinm_s
-{
- ulong cmd;
- ulong op1;
- uchar op2;
- uchar mb;
- uchar me;
- ulong res;
-} cpu_post_rlwinm_table[] =
-{
- {
- OP_RLWINM,
- 0xffff0000,
- 24,
- 16,
- 23,
- 0x0000ff00
- },
-};
-static unsigned int cpu_post_rlwinm_size =
- sizeof (cpu_post_rlwinm_table) / sizeof (struct cpu_post_rlwinm_s);
-
-int cpu_post_test_rlwinm (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_rlwinm_size && ret == 0; i++)
- {
- struct cpu_post_rlwinm_s *test = cpu_post_rlwinm_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_113(test->cmd, reg1, reg0, test->op2, test->mb,
- test->me) | BIT_C,
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op1);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwinm test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_21 (codecr, & cr, & res, test->op1);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwinm test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Shift instructions: rlwnm
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
- ulong op2);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_rlwnm_s
-{
- ulong cmd;
- ulong op1;
- ulong op2;
- uchar mb;
- uchar me;
- ulong res;
-} cpu_post_rlwnm_table[] =
-{
- {
- OP_RLWNM,
- 0xffff0000,
- 24,
- 16,
- 23,
- 0x0000ff00
- },
-};
-static unsigned int cpu_post_rlwnm_size =
- sizeof (cpu_post_rlwnm_table) / sizeof (struct cpu_post_rlwnm_s);
-
-int cpu_post_test_rlwnm (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_rlwnm_size && ret == 0; i++)
- {
- struct cpu_post_rlwnm_s *test = cpu_post_rlwnm_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int reg2 = (reg + 2) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me),
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me) |
- BIT_C,
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwnm test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at rlwnm test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Shift instructions: srawi
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_srawi_s
-{
- ulong cmd;
- ulong op1;
- uchar op2;
- ulong res;
-} cpu_post_srawi_table[] =
-{
- {
- OP_SRAWI,
- 0x8000,
- 3,
- 0x1000
- },
- {
- OP_SRAWI,
- 0x80000000,
- 3,
- 0xf0000000
- },
-};
-static unsigned int cpu_post_srawi_size =
- sizeof (cpu_post_srawi_table) / sizeof (struct cpu_post_srawi_s);
-
-int cpu_post_test_srawi (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_srawi_size && ret == 0; i++)
- {
- struct cpu_post_srawi_s *test = cpu_post_srawi_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11S(test->cmd, reg1, reg0, test->op2),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11S(test->cmd, reg1, reg0, test->op2) | BIT_C,
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op1);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at srawi test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_21 (codecr, & cr, & res, test->op1);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at srawi test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Store instructions: stb(x)(u), sth(x)(u), stw(x)(u)
- *
- * All operations are performed on a 16-byte array. The array
- * is 4-byte aligned. The base register points to offset 8.
- * The immediate offset (index register) ranges in [-8 ... +7].
- * The test cases are composed so that they do not
- * cause alignment exceptions.
- * The test contains a pre-built table describing all test cases.
- * The table entry contains:
- * the instruction opcode, the value of the index register and
- * the value of the source register. After executing the
- * instruction, the test verifies the contents of the array
- * and the value of the base register (it must change for "store
- * with update" instructions).
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);
-extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);
-
-static struct cpu_post_store_s
-{
- ulong cmd;
- uint width;
- int update;
- int index;
- ulong offset;
- ulong value;
-} cpu_post_store_table[] =
-{
- {
- OP_STW,
- 4,
- 0,
- 0,
- -4,
- 0xff00ff00
- },
- {
- OP_STH,
- 2,
- 0,
- 0,
- -2,
- 0xff00
- },
- {
- OP_STB,
- 1,
- 0,
- 0,
- -1,
- 0xff
- },
- {
- OP_STWU,
- 4,
- 1,
- 0,
- -4,
- 0xff00ff00
- },
- {
- OP_STHU,
- 2,
- 1,
- 0,
- -2,
- 0xff00
- },
- {
- OP_STBU,
- 1,
- 1,
- 0,
- -1,
- 0xff
- },
- {
- OP_STWX,
- 4,
- 0,
- 1,
- -4,
- 0xff00ff00
- },
- {
- OP_STHX,
- 2,
- 0,
- 1,
- -2,
- 0xff00
- },
- {
- OP_STBX,
- 1,
- 0,
- 1,
- -1,
- 0xff
- },
- {
- OP_STWUX,
- 4,
- 1,
- 1,
- -4,
- 0xff00ff00
- },
- {
- OP_STHUX,
- 2,
- 1,
- 1,
- -2,
- 0xff00
- },
- {
- OP_STBUX,
- 1,
- 1,
- 1,
- -1,
- 0xff
- },
-};
-static unsigned int cpu_post_store_size =
- sizeof (cpu_post_store_table) / sizeof (struct cpu_post_store_s);
-
-int cpu_post_test_store (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_store_size && ret == 0; i++)
- {
- struct cpu_post_store_s *test = cpu_post_store_table + i;
- uchar data[16] =
- { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
- ulong base0 = (ulong) (data + 8);
- ulong base = base0;
-
- if (test->index)
- {
- ulong code[] =
- {
- ASM_12(test->cmd, 5, 3, 4),
- ASM_BLR,
- };
-
- cpu_post_exec_12w (code, &base, test->offset, test->value);
- }
- else
- {
- ulong code[] =
- {
- ASM_11I(test->cmd, 4, 3, test->offset),
- ASM_BLR,
- };
-
- cpu_post_exec_11w (code, &base, test->value);
- }
-
- if (ret == 0)
- {
- if (test->update)
- ret = base == base0 + test->offset ? 0 : -1;
- else
- ret = base == base0 ? 0 : -1;
- }
-
- if (ret == 0)
- {
- switch (test->width)
- {
- case 1:
- ret = *(uchar *)(base0 + test->offset) == test->value ?
- 0 : -1;
- break;
- case 2:
- ret = *(ushort *)(base0 + test->offset) == test->value ?
- 0 : -1;
- break;
- case 4:
- ret = *(ulong *)(base0 + test->offset) == test->value ?
- 0 : -1;
- break;
- }
- }
-
- if (ret != 0)
- {
- post_log ("Error at store test %d !\n", i);
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Load/store string instructions: lswi, stswi, lswx, stswx
- *
- * Several consecutive bytes from a source memory buffer are loaded
- * left to right into GPRs. After that, the bytes are stored
- * from the GPRs into a target memory buffer. The contents
- * of the source and target buffers are then compared.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
-extern void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3,
- ulong op4);
-
-#include <bedbug/regs.h>
-int cpu_post_test_string (void)
-{
- int ret = 0;
- unsigned int i;
- int flag = disable_interrupts();
-
- if (ret == 0)
- {
- char src [31], dst [31];
-
- ulong code[] =
- {
- ASM_LSWI(5, 3, 31),
- ASM_STSWI(5, 4, 31),
- ASM_BLR,
- };
-
- for (i = 0; i < sizeof(src); i ++)
- {
- src[i] = (char) i;
- dst[i] = 0;
- }
-
- cpu_post_exec_02(code, (ulong)src, (ulong)dst);
-
- ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
- }
-
- if (ret == 0)
- {
- char src [95], dst [95];
-
- ulong code[] =
- {
- ASM_LSWX(8, 3, 5),
- ASM_STSWX(8, 4, 5),
- ASM_BLR,
- };
-
- for (i = 0; i < sizeof(src); i ++)
- {
- src[i] = (char) i;
- dst[i] = 0;
- }
-
- cpu_post_exec_04(code, (ulong)src, (ulong)dst, 0, sizeof(src));
-
- ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
- }
-
- if (ret != 0)
- {
- post_log ("Error at string test !\n");
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Ternary instructions instr rD,rA,rB
- *
- * Arithmetic instructions: add, addc, adde, subf, subfc, subfe,
- * mullw, mulhw, mulhwu, divw, divwu
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
- ulong op2);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_three_s
-{
- ulong cmd;
- ulong op1;
- ulong op2;
- ulong res;
-} cpu_post_three_table[] =
-{
- {
- OP_ADD,
- 100,
- 200,
- 300
- },
- {
- OP_ADD,
- 100,
- -200,
- -100
- },
- {
- OP_ADDC,
- 100,
- 200,
- 300
- },
- {
- OP_ADDC,
- 100,
- -200,
- -100
- },
- {
- OP_ADDE,
- 100,
- 200,
- 300
- },
- {
- OP_ADDE,
- 100,
- -200,
- -100
- },
- {
- OP_SUBF,
- 100,
- 200,
- 100
- },
- {
- OP_SUBF,
- 300,
- 200,
- -100
- },
- {
- OP_SUBFC,
- 100,
- 200,
- 100
- },
- {
- OP_SUBFC,
- 300,
- 200,
- -100
- },
- {
- OP_SUBFE,
- 100,
- 200,
- 200 + ~100
- },
- {
- OP_SUBFE,
- 300,
- 200,
- 200 + ~300
- },
- {
- OP_MULLW,
- 200,
- 300,
- 200 * 300
- },
- {
- OP_MULHW,
- 0x10000000,
- 0x10000000,
- 0x1000000
- },
- {
- OP_MULHWU,
- 0x80000000,
- 0x80000000,
- 0x40000000
- },
- {
- OP_DIVW,
- -20,
- 5,
- -4
- },
- {
- OP_DIVWU,
- 0x8000,
- 0x200,
- 0x40
- },
-};
-static unsigned int cpu_post_three_size =
- sizeof (cpu_post_three_table) / sizeof (struct cpu_post_three_s);
-
-int cpu_post_test_three (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_three_size && ret == 0; i++)
- {
- struct cpu_post_three_s *test = cpu_post_three_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int reg2 = (reg + 2) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_12(test->cmd, reg2, reg1, reg0),
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_12(test->cmd, reg2, reg1, reg0) | BIT_C,
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at three test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at three test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Ternary instructions instr rA,rS,UIMM
- *
- * Logic instructions: ori, oris, xori, xoris
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_threei_s
-{
- ulong cmd;
- ulong op1;
- ushort op2;
- ulong res;
-} cpu_post_threei_table[] =
-{
- {
- OP_ORI,
- 0x80000000,
- 0xffff,
- 0x8000ffff
- },
- {
- OP_ORIS,
- 0x00008000,
- 0xffff,
- 0xffff8000
- },
- {
- OP_XORI,
- 0x8000ffff,
- 0xffff,
- 0x80000000
- },
- {
- OP_XORIS,
- 0x00008000,
- 0xffff,
- 0xffff8000
- },
-};
-static unsigned int cpu_post_threei_size =
- sizeof (cpu_post_threei_table) / sizeof (struct cpu_post_threei_s);
-
-int cpu_post_test_threei (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_threei_size && ret == 0; i++)
- {
- struct cpu_post_threei_s *test = cpu_post_threei_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11IX(test->cmd, reg1, reg0, test->op2),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op1);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at threei test %d !\n", i);
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Ternary instructions instr rA,rS,rB
- *
- * Logic instructions: or, orc, xor, nand, nor, eqv
- * Shift instructions: slw, srw, sraw
- *
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
- ulong op2);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_threex_s
-{
- ulong cmd;
- ulong op1;
- ulong op2;
- ulong res;
-} cpu_post_threex_table[] =
-{
- {
- OP_OR,
- 0x1234,
- 0x5678,
- 0x1234 | 0x5678
- },
- {
- OP_ORC,
- 0x1234,
- 0x5678,
- 0x1234 | ~0x5678
- },
- {
- OP_XOR,
- 0x1234,
- 0x5678,
- 0x1234 ^ 0x5678
- },
- {
- OP_NAND,
- 0x1234,
- 0x5678,
- ~(0x1234 & 0x5678)
- },
- {
- OP_NOR,
- 0x1234,
- 0x5678,
- ~(0x1234 | 0x5678)
- },
- {
- OP_EQV,
- 0x1234,
- 0x5678,
- ~(0x1234 ^ 0x5678)
- },
- {
- OP_SLW,
- 0x80,
- 16,
- 0x800000
- },
- {
- OP_SLW,
- 0x80,
- 32,
- 0
- },
- {
- OP_SRW,
- 0x800000,
- 16,
- 0x80
- },
- {
- OP_SRW,
- 0x800000,
- 32,
- 0
- },
- {
- OP_SRAW,
- 0x80000000,
- 3,
- 0xf0000000
- },
- {
- OP_SRAW,
- 0x8000,
- 3,
- 0x1000
- },
-};
-static unsigned int cpu_post_threex_size =
- sizeof (cpu_post_threex_table) / sizeof (struct cpu_post_threex_s);
-
-int cpu_post_test_threex (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_threex_size && ret == 0; i++)
- {
- struct cpu_post_threex_s *test = cpu_post_threex_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int reg2 = (reg + 2) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_12X(test->cmd, reg2, reg1, reg0),
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -24),
- ASM_STW(3, stk, 12),
- ASM_STW(4, stk, 16),
- ASM_STW(reg0, stk, 8),
- ASM_STW(reg1, stk, 4),
- ASM_STW(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 12),
- ASM_LWZ(reg0, stk, 16),
- ASM_12X(test->cmd, reg2, reg1, reg0) | BIT_C,
- ASM_STW(reg2, stk, 12),
- ASM_LWZ(reg2, stk, 0),
- ASM_LWZ(reg1, stk, 4),
- ASM_LWZ(reg0, stk, 8),
- ASM_LWZ(3, stk, 12),
- ASM_ADDI(1, stk, 24),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at threex test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at threex test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Binary instructions instr rD,rA
- *
- * Logic instructions: neg
- * Arithmetic instructions: addme, addze, subfme, subfze
-
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_two_s
-{
- ulong cmd;
- ulong op;
- ulong res;
-} cpu_post_two_table[] =
-{
- {
- OP_NEG,
- 3,
- -3
- },
- {
- OP_NEG,
- 5,
- -5
- },
- {
- OP_ADDME,
- 6,
- 5
- },
- {
- OP_ADDZE,
- 5,
- 5
- },
- {
- OP_SUBFME,
- 6,
- ~6 - 1
- },
- {
- OP_SUBFZE,
- 5,
- ~5
- },
-};
-static unsigned int cpu_post_two_size =
- sizeof (cpu_post_two_table) / sizeof (struct cpu_post_two_s);
-
-int cpu_post_test_two (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_two_size && ret == 0; i++)
- {
- struct cpu_post_two_s *test = cpu_post_two_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11(test->cmd, reg1, reg0),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11(test->cmd, reg1, reg0) | BIT_C,
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at two test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_21 (codecr, & cr, & res, test->op);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at two test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * CPU test
- * Binary instructions instr rA,rS
- *
- * Logic instructions: cntlzw
- * Arithmetic instructions: extsb, extsh
-
- * The test contains a pre-built table of instructions, operands and
- * expected results. For each table entry, the test will cyclically use
- * different sets of operand registers and result registers.
- */
-
-#include <post.h>
-#include "cpu_asm.h"
-
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
-
-extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
-extern ulong cpu_post_makecr (long v);
-
-static struct cpu_post_twox_s
-{
- ulong cmd;
- ulong op;
- ulong res;
-} cpu_post_twox_table[] =
-{
- {
- OP_EXTSB,
- 3,
- 3
- },
- {
- OP_EXTSB,
- 0xff,
- -1
- },
- {
- OP_EXTSH,
- 3,
- 3
- },
- {
- OP_EXTSH,
- 0xff,
- 0xff
- },
- {
- OP_EXTSH,
- 0xffff,
- -1
- },
- {
- OP_CNTLZW,
- 0x000fffff,
- 12
- },
-};
-static unsigned int cpu_post_twox_size =
- sizeof (cpu_post_twox_table) / sizeof (struct cpu_post_twox_s);
-
-int cpu_post_test_twox (void)
-{
- int ret = 0;
- unsigned int i, reg;
- int flag = disable_interrupts();
-
- for (i = 0; i < cpu_post_twox_size && ret == 0; i++)
- {
- struct cpu_post_twox_s *test = cpu_post_twox_table + i;
-
- for (reg = 0; reg < 32 && ret == 0; reg++)
- {
- unsigned int reg0 = (reg + 0) % 32;
- unsigned int reg1 = (reg + 1) % 32;
- unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11X(test->cmd, reg1, reg0),
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- unsigned long codecr[] =
- {
- ASM_STW(stk, 1, -4),
- ASM_ADDI(stk, 1, -16),
- ASM_STW(3, stk, 8),
- ASM_STW(reg0, stk, 4),
- ASM_STW(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 8),
- ASM_11X(test->cmd, reg1, reg0) | BIT_C,
- ASM_STW(reg1, stk, 8),
- ASM_LWZ(reg1, stk, 0),
- ASM_LWZ(reg0, stk, 4),
- ASM_LWZ(3, stk, 8),
- ASM_ADDI(1, stk, 16),
- ASM_LWZ(stk, 1, -4),
- ASM_BLR,
- };
- ulong res;
- ulong cr;
-
- if (ret == 0)
- {
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op);
-
- ret = res == test->res && cr == 0 ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at twox test %d !\n", i);
- }
- }
-
- if (ret == 0)
- {
- cpu_post_exec_21 (codecr, & cr, & res, test->op);
-
- ret = res == test->res &&
- (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
-
- if (ret != 0)
- {
- post_log ("Error at twox test %d !\n", i);
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- return ret;
-}
-
-#endif
projects / oweals / u-boot.git / commitdiff