+commit f9476902b789b0481b9df49af88d6ca94fb16fa0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 15 12:10:47 2009 -0600
+
+ mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation
+
+ The gd->cpu pointer is set to an address located in flash when the
+ probecpu() function is called while U-Boot is executing from flash.
+ This pointer needs to be updated to point to an address in RAM after
+ relocation has occurred otherwise Linux may not be able to boot due to
+ "fdt board" crashing if flash has been erased or changed.
+
+ This bug was introduced in commit
+ a0e2066f392782730f0398095e583c87812d97f2.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Tested-by: Kumar Gala <galak@kernel.crashing.org>
+ Tested on MPC8527DS.
+ Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 13 17:58:34 2009 -0600
+
+ MVBLUE: Remove CONFIG_CMD_IRQ
+
+ Neither the MVBLUE nor its underlying architecture implement the
+ do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
+ This change fixes the following MVBLUE compiler error:
+
+ -> ./MAKEALL MVBLUE
+ Configuring for MVBLUE board...
+ common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Dec 14 17:54:40 2009 +0100
+
+ imx27lite: Reenable MTD support on NOR flash.
+
+ The support for this was silently dropped by a configuration
+ split during the merge of the imx27lite board support in commit
+ 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
+ handling of FLASH devices via MTD layer).
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f4cfe42758192d09f8375e384cc000aa70d97029
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 9 09:01:43 2009 +0100
+
+ nand: Fix access to last block in NAND devices
+
+ Currently, the last block of NAND devices can't be accessed. This patch
+ fixes this issue by correcting the boundary checking (off-by-one error).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 3b887ca8ce72cc12129183538f6e828db13f4867
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Dec 8 22:20:34 2009 +0100
+
+ mpc83xx: boot time regression, move LCRR setup back to cpu_init_f
+
+ Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
+ and LCRR bitfields) moved the LCRR assignment to after relocation
+ to RAM because of the potential problem with changing the local bus
+ clock while executing from flash.
+
+ This change unfortunately adversely affects the boot time, as running
+ all code up to cpu_init_r can cause significant slowdown.
+
+ E.G. on a 8347 board a bootup time increase of ~600ms has been observed:
+
+ 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.168 RS: 232
+ 0.172 I2C: ready
+ 0.176 DRAM: 64 MB
+ 1.236 FLASH: 32 MB
+
+ Versus:
+
+ 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.092 RS: 232
+ 0.092 I2C: ready
+ 0.096 DRAM: 64 MB
+ 0.644 FLASH: 32 MB
+
+ So far no boards have needed the late LCRR setup, so simply revert it
+ for now - If it is needed at a later time, those boards can either do
+ their own final LCRR setup in board code (E.G. in board_early_init_r),
+ or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
+ the setup in cpu_init_r.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 386118a896554b13f14ad0f82356276988f7de82
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Dec 8 09:12:49 2009 +0100
+
+ microblaze: Correct ffs regression for Microblaze
+
+ We are using generic implementation of ffs. This should
+ be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
+
+ Here is warning message which this patch removes.
+
+ In file included from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
+ In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
+ from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
+ warning: this is the location of the previous definition
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 8fe7b29f9811322931f0192a56431edcf819d6b9
+Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+Date: Mon Dec 7 08:09:57 2009 -0800
+
+ microblaze: Stop stack clobbering in microblaze-generic.
+
+ A typo caused the stack and malloc regions to overlap, which prevented
+ mem_malloc_init() from returning. This commit makes the memory layout match
+ the example described in include/configs/microblaze-generic.h
+
+ Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 7 23:14:13 2009 +0100
+
+ Update CHANGELOG, prepare -rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit f2352877cb2daac88115192fb09991a2397d0b27
Author: Peter Tyser <ptyser@xes-inc.com>
Date: Sun Dec 6 23:58:28 2009 -0600
projects / oweals / u-boot.git / commitdiff