board: ti: DRA7: added USB initializtion code

Implemented board_usb_init(), board_usb_cleanup() and
usb_gadget_handle_interrupts() in dra7xx board file that
can be invoked by various gadget drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index e2181598d5d8dd0190a764493655594afbfd1219..e844bfb884e1203ad8188939b504a17d5c7c5df6 100644 (file)
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -33,6 +33,18 @@
 #define CONTROL_ID_CODE                CONTROL_CORE_ID_CODE
 #endif
 
+#ifdef CONFIG_DRA7XX
+#define DRA7_USB_OTG_SS1_BASE          0x48890000
+#define DRA7_USB_OTG_SS1_GLUE_BASE     0x48880000
+#define DRA7_USB3_PHY1_PLL_CTRL                0x4A084C00
+#define DRA7_USB3_PHY1_POWER           0x4A002370
+#define DRA7_USB2_PHY1_POWER           0x4A002300
+
+#define DRA7_USB_OTG_SS2_BASE          0x488D0000
+#define DRA7_USB_OTG_SS2_GLUE_BASE     0x488C0000
+#define DRA7_USB2_PHY2_POWER           0x4A002E74
+#endif
+
 /* To be verified */
 #define OMAP5430_CONTROL_ID_CODE_ES1_0         0x0B94202F
 #define OMAP5430_CONTROL_ID_CODE_ES2_0          0x1B94202F

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 65222419ebbdb9b0e3a2c120fa27b56a9138a779..284775ca9f34fd296c21659bf48f213f8132bccd 100644 (file)
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -14,11 +14,16 @@
 #include <palmas.h>
 #include <sata.h>
 #include <asm/gpio.h>
+#include <usb.h>
+#include <linux/usb/gadget.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sata.h>
 #include <environment.h>
+#include <dwc3-uboot.h>
+#include <dwc3-omap-uboot.h>
+#include <ti-usb-phy-uboot.h>
 
 #include "mux_data.h"
 
@@ -123,6 +128,110 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_USB_DWC3
+static struct dwc3_device usb_otg_ss1 = {
+       .maximum_speed = USB_SPEED_SUPER,
+       .base = DRA7_USB_OTG_SS1_BASE,
+       .tx_fifo_resize = false,
+       .index = 0,
+};
+
+static struct dwc3_omap_device usb_otg_ss1_glue = {
+       .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
+       .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+       .vbus_id_status = OMAP_DWC3_VBUS_VALID,
+       .index = 0,
+};
+
+static struct ti_usb_phy_device usb_phy1_device = {
+       .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
+       .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
+       .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
+       .index = 0,
+};
+
+static struct dwc3_device usb_otg_ss2 = {
+       .maximum_speed = USB_SPEED_SUPER,
+       .base = DRA7_USB_OTG_SS2_BASE,
+       .tx_fifo_resize = false,
+       .index = 1,
+};
+
+static struct dwc3_omap_device usb_otg_ss2_glue = {
+       .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
+       .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+       .vbus_id_status = OMAP_DWC3_VBUS_VALID,
+       .index = 1,
+};
+
+static struct ti_usb_phy_device usb_phy2_device = {
+       .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
+       .index = 1,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+       switch (index) {
+       case 0:
+               if (init == USB_INIT_DEVICE) {
+                       usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
+                       usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+               } else {
+                       usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
+                       usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+               }
+
+               ti_usb_phy_uboot_init(&usb_phy1_device);
+               dwc3_omap_uboot_init(&usb_otg_ss1_glue);
+               dwc3_uboot_init(&usb_otg_ss1);
+               break;
+       case 1:
+               if (init == USB_INIT_DEVICE) {
+                       usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
+                       usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+               } else {
+                       usb_otg_ss2.dr_mode = USB_DR_MODE_HOST;
+                       usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+               }
+
+               ti_usb_phy_uboot_init(&usb_phy2_device);
+               dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+               dwc3_uboot_init(&usb_otg_ss2);
+               break;
+       default:
+               printf("Invalid Controller Index\n");
+       }
+
+       return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+       switch (index) {
+       case 0:
+       case 1:
+               ti_usb_phy_uboot_exit(index);
+               dwc3_uboot_exit(index);
+               dwc3_omap_uboot_exit(index);
+               break;
+       default:
+               printf("Invalid Controller Index\n");
+       }
+       return 0;
+}
+
+int usb_gadget_handle_interrupts(void)
+{
+       u32 status;
+
+       status = dwc3_omap_uboot_interrupt_status(0);
+       if (status)
+               dwc3_uboot_handle_interrupt(0);
+
+       return 0;
+}
+#endif
+
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
 int spl_start_uboot(void)
 {