rockchip: Add initial support for the Pinebook Pro laptop from Pine64.
authorPeter Robinson <pbrobinson@gmail.com>
Mon, 20 Apr 2020 19:27:36 +0000 (20:27 +0100)
committerKever Yang <kever.yang@rock-chips.com>
Sun, 31 May 2020 14:22:07 +0000 (22:22 +0800)
Specification:
- Rockchip RK3399
- 4GB Dual-Channel LPDDR4
- eMMC socket
- mSD card slot
- 128Mbit (16Mb) SPI Flash
- AP6256 for 11AC WiFi + BT5
- 14 inch 1920*1080 eDP MiPi display
- Camera
- USB 3.0, 2.0 ports
- Type-C port with alt-mode display (DP 1.2) and 15W charge
- DC 5V/3A
- optional PCIe slot for NVMe SSD drive

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi [new file with mode: 0644]
arch/arm/mach-rockchip/rk3399/Kconfig
board/pine64/pinebook-pro-rk3399/Kconfig [new file with mode: 0644]
board/pine64/pinebook-pro-rk3399/MAINTAINERS [new file with mode: 0644]
board/pine64/pinebook-pro-rk3399/Makefile [new file with mode: 0644]
board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c [new file with mode: 0644]
configs/pinebook-pro-rk3399_defconfig [new file with mode: 0644]
include/configs/pinebook-pro-rk3399.h [new file with mode: 0644]

diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
new file mode 100644 (file)
index 0000000..1a2e24d
--- /dev/null
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+       aliases {
+               spi0 = &spi1;
+       };
+
+       chosen {
+               u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+       };
+};
+
+&i2c0 {
+       u-boot,dm-pre-reloc;
+};
+
+&rk808 {
+       u-boot,dm-pre-reloc;
+};
+
+&sdhci {
+       max-frequency = <25000000>;
+       u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+       max-frequency = <20000000>;
+       u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+       u-boot,dm-pre-reloc;
+};
+
+&vdd_log {
+       regulator-init-microvolt = <950000>;
+};
index 927bb62a9fea628658b5a8e7c1c5112f734be467..254b9c5b4d728dd2522b3266fbdaf2076105140e 100644 (file)
@@ -19,6 +19,13 @@ config TARGET_EVB_RK3399
          with full function and physical connectors support like Type-C ports,
          USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
 
+config TARGET_PINEBOOK_PRO_RK3399
+       bool "Pinebook Pro"
+       help
+         Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
+         with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
+         1920*1080 screen and all the usual laptop features.
+
 config TARGET_PUMA_RK3399
        bool "Theobroma Systems RK3399-Q7 (Puma)"
        help
@@ -144,6 +151,7 @@ endif # BOOTCOUNT_LIMIT
 
 source "board/firefly/roc-pc-rk3399/Kconfig"
 source "board/google/gru/Kconfig"
+source "board/pine64/pinebook-pro-rk3399/Kconfig"
 source "board/pine64/rockpro64_rk3399/Kconfig"
 source "board/rockchip/evb_rk3399/Kconfig"
 source "board/theobroma-systems/puma_rk3399/Kconfig"
diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig b/board/pine64/pinebook-pro-rk3399/Kconfig
new file mode 100644 (file)
index 0000000..3bb7ca4
--- /dev/null
@@ -0,0 +1,15 @@
+if TARGET_PINEBOOK_PRO_RK3399
+
+config SYS_BOARD
+       default "pinebook-pro-rk3399"
+
+config SYS_VENDOR
+       default "pine64"
+
+config SYS_CONFIG_NAME
+       default "pinebook-pro-rk3399"
+
+config BOARD_SPECIFIC_OPTIONS
+       def_bool y
+
+endif
diff --git a/board/pine64/pinebook-pro-rk3399/MAINTAINERS b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
new file mode 100644 (file)
index 0000000..227c1c0
--- /dev/null
@@ -0,0 +1,8 @@
+PINEBOOK_PRO
+M:     Peter Robinson <pbrobinson@gmail.com>
+S:     Maintained
+F:     board/pine64/rk3399-pinebook-pro/
+F:     include/configs/rk3399-pinebook-pro.h
+F:     arch/arm/dts/rk3399-pinebook-pro.dts
+F:     arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+F:     configs/pinebook-pro-rk3399_defconfig
diff --git a/board/pine64/pinebook-pro-rk3399/Makefile b/board/pine64/pinebook-pro-rk3399/Makefile
new file mode 100644 (file)
index 0000000..2f692a1
--- /dev/null
@@ -0,0 +1 @@
+obj-y  += pinebook-pro-rk3399.o
diff --git a/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
new file mode 100644 (file)
index 0000000..516292a
--- /dev/null
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2020 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+#include <power/regulator.h>
+
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define PMUGRF_CON0_VSEL_SHIFT 8
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_f(void)
+{
+       struct udevice *regulator;
+       int ret;
+
+       ret = regulator_get_by_platname("vcc5v0_usb", &regulator);
+       if (ret) {
+               pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
+               goto out;
+       }
+
+       ret = regulator_set_enable(regulator, true);
+       if (ret)
+               pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret);
+
+out:
+       return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+static void setup_iodomain(void)
+{
+       struct rk3399_grf_regs *grf =
+          syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+       struct rk3399_pmugrf_regs *pmugrf =
+          syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+       /* BT565 is in 1.8v domain */
+       rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+       /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+       rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+
+int misc_init_r(void)
+{
+       const u32 cpuid_offset = 0x7;
+       const u32 cpuid_length = 0x10;
+       u8 cpuid[cpuid_length];
+       int ret;
+
+       setup_iodomain();
+
+       ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+       if (ret)
+               return ret;
+
+       ret = rockchip_cpuid_set(cpuid, cpuid_length);
+       if (ret)
+               return ret;
+
+       return ret;
+}
+#endif
diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
new file mode 100644 (file)
index 0000000..0e9f0ec
--- /dev/null
@@ -0,0 +1,84 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
+CONFIG_MISC_INIT_R=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_USB=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_BOOTDELAY=3
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_USB_XHCI_ROCKCHIP is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_EDP=y
diff --git a/include/configs/pinebook-pro-rk3399.h b/include/configs/pinebook-pro-rk3399.h
new file mode 100644 (file)
index 0000000..4bc8802
--- /dev/null
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#ifndef __PINEBOOK_PRO_RK3399_H
+#define __PINEBOOK_PRO_RK3399_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+               "stdin=serial,usbkbd\0" \
+               "stdout=serial,vidconsole\0" \
+               "stderr=serial,vidconsole\0"
+
+#include <configs/rk3399_common.h>
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE           (8 * 1024)
+#endif
+
+#undef CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     1024 * 512
+
+#define SDRAM_BANK_SIZE                        (2UL << 30)
+
+#endif