+++ /dev/null
-/*
- * OMAP1 CPU identification code
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/compiler.h>
-
-#if defined(CONFIG_OMAP)
-
-#define omap_readw(x) *(volatile unsigned short *)(x)
-#define omap_readl(x) *(volatile unsigned long *)(x)
-
-#define OMAP_DIE_ID_0 0xfffe1800
-#define OMAP_DIE_ID_1 0xfffe1804
-#define OMAP_PRODUCTION_ID_0 0xfffe2000
-#define OMAP_PRODUCTION_ID_1 0xfffe2004
-#define OMAP32_ID_0 0xfffed400
-#define OMAP32_ID_1 0xfffed404
-
-struct omap_id {
- u16 jtag_id; /* Used to determine OMAP type */
- u8 die_rev; /* Processor revision */
- u32 omap_id; /* OMAP revision */
- u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] = {
- { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
- { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
- { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
- { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
- { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
- { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
- { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
- { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
- { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
- { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
- { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
- { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
- { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
- { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
- { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
- { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
- { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
- { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
- { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
-};
-
-/*
- * Get OMAP type from PROD_ID.
- * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
- * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
- * Undocumented register in TEST BLOCK is used as fallback; This seems to
- * work on 1510, 1610 & 1710. The official way hopefully will work in future
- * processors.
- */
-static u16 omap_get_jtag_id(void)
-{
- u32 prod_id, omap_id;
-
- prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
- omap_id = omap_readl(OMAP32_ID_1);
-
- /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
- if (((prod_id >> 20) == 0) || (prod_id == omap_id))
- prod_id = 0;
- else
- prod_id &= 0xffff;
-
- if (prod_id)
- return prod_id;
-
- /* Use OMAP32_ID_1 as fallback */
- prod_id = ((omap_id >> 12) & 0xffff);
-
- return prod_id;
-}
-
-/*
- * Get OMAP revision from DIE_REV.
- * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
- * Undocumented register in the TEST BLOCK is used as fallback.
- * REVISIT: This does not seem to work on 1510
- */
-static u8 omap_get_die_rev(void)
-{
- u32 die_rev;
-
- die_rev = omap_readl(OMAP_DIE_ID_1);
-
- /* Check for broken OMAP_DIE_ID on early 1710 */
- if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
- die_rev = 0;
-
- die_rev = (die_rev >> 17) & 0xf;
- if (die_rev)
- return die_rev;
-
- die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
-
- return die_rev;
-}
-
-static unsigned long dpll1(void)
-{
- unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG);
- unsigned long rate;
-
- rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */
- if (pll_ctl_val & 0x10) {
- /* PLL enabled, apply multiplier and divisor */
- if (pll_ctl_val & 0xf80)
- rate *= (pll_ctl_val & 0xf80) >> 7;
- rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
- } else {
- /* PLL disabled, apply bypass divisor */
- switch (pll_ctl_val & 0xc) {
- case 0:
- break;
- case 0x4:
- rate /= 2;
- break;
- default:
- rate /= 4;
- break;
- }
- }
-
- return rate;
-}
-
-static unsigned long armcore(void)
-{
- unsigned short arm_ckctl = omap_readw(ARM_CKCTL);
-
- return (dpll1() >> ((arm_ckctl & 0x0030) >> 4));
-}
-
-int print_cpuinfo (void)
-{
- int i;
- u16 jtag_id;
- u8 die_rev;
- u32 omap_id;
- u8 cpu_type;
- __maybe_unused u32 system_serial_high;
- __maybe_unused u32 system_serial_low;
- u32 system_rev = 0;
-
- jtag_id = omap_get_jtag_id();
- die_rev = omap_get_die_rev();
- omap_id = omap_readl(OMAP32_ID_0);
-
-#ifdef DEBUG
- printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
- printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
- omap_readl(OMAP_DIE_ID_1),
- (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
- printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
- printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
- omap_readl(OMAP_PRODUCTION_ID_1),
- omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
- printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
- printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
- printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
-#endif
-
- system_serial_high = omap_readl(OMAP_DIE_ID_0);
- system_serial_low = omap_readl(OMAP_DIE_ID_1);
-
- /* First check only the major version in a safe way */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == (omap_ids[i].jtag_id)) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Check if we can find the die revision */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Finally check also the omap_id */
- for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
- if (jtag_id == omap_ids[i].jtag_id
- && die_rev == omap_ids[i].die_rev
- && omap_id == omap_ids[i].omap_id) {
- system_rev = omap_ids[i].type;
- break;
- }
- }
-
- /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
- cpu_type = system_rev >> 24;
-
- switch (cpu_type) {
- case 0x07:
- system_rev |= 0x07;
- break;
- case 0x03:
- case 0x15:
- system_rev |= 0x15;
- break;
- case 0x16:
- case 0x17:
- system_rev |= 0x16;
- break;
- case 0x24:
- system_rev |= 0x24;
- break;
- default:
- printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
- }
-
- printf("CPU: OMAP%04x", system_rev >> 16);
- if ((system_rev >> 8) & 0xff)
- printf("%x", (system_rev >> 8) & 0xff);
-#ifdef DEBUG
- printf(" revision %i handled as %02xxx id: %08x%08x",
- die_rev, system_rev & 0xff, system_serial_low, system_serial_high);
-#endif
- printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n",
- armcore() / 1000000, (armcore() / 100000) % 10,
- dpll1() / 1000000, (dpll1() / 100000) % 10);
-
- return 0;
-}
-
-#endif /* #if defined(CONFIG_OMAP) */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
-#define TIMER_LOAD_VAL 0xffffffff
-
-/* macro to read the 32 bit timer */
-#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+8) \
- / (TIMER_CLOCK / CONFIG_SYS_HZ)
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define timestamp gd->arch.tbl
-#define lastdec gd->arch.lastinc
-
-int timer_init (void)
-{
- int32_t val;
-
- /* Start the decrementer ticking down from 0xffffffff */
- *((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
- val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PTV << MPUTIM_PTV_BIT);
- *((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val;
-
- /* init the timestamp and lastdec value */
- reset_timer_masked();
-
- return 0;
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer (ulong base)
-{
- return get_timer_masked () - base;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay (unsigned long usec)
-{
- ulong tmo, tmp;
-
- if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- }else{ /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- }
-
- tmp = get_timer (0); /* get current timestamp */
- if( (tmo + tmp + 1) < tmp ) /* if setting this fordward will roll time stamp */
- reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastdec value */
- else
- tmo += tmp; /* else, set advancing stamp wake up time */
-
- while (get_timer_masked () < tmo)/* loop till event */
- /*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER; /* capure current decrementer value time */
- timestamp = 0; /* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER; /* current tick value */
-
- if (lastdec >= now) { /* normal mode (non roll) */
- /* normal mode */
- timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
- } else { /* we have overflow of the count down timer */
- /* nts = ts + ld + (TLV - now)
- * ts=old stamp, ld=time that passed before passing through -1
- * (TLV-now) amount of time after passing though -1
- * nts = new "advancing time stamp"...it could also roll and cause problems.
- */
- timestamp += lastdec + (TIMER_LOAD_VAL / (TIMER_CLOCK /
- CONFIG_SYS_HZ)) - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- }
-
- endtime = get_timer_masked () + tmo;
-
- do {
- ulong now = get_timer_masked ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- return CONFIG_SYS_HZ;
-}
projects / oweals / u-boot.git / commitdiff