--- /dev/null
+CONFIG_64BIT=y
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+# CONFIG_ACPI_CMPC is not set
+# CONFIG_ACPI_CONTAINER is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DOCK is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
+CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_PROCESSOR=y
+# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
+# CONFIG_ACPI_PROCFS_POWER is not set
+# CONFIG_ACPI_SBS is not set
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_WMI is not set
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SUPPORTS_INT128=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_ATA_SFF is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_AVERAGE=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_CALGARY_IOMMU=y
+CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
+# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
+# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
+# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
+# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
+# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
+# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
+# CONFIG_CRYPTO_SALSA20_X86_64 is not set
+# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
+# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
+# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
+# CONFIG_CRYPTO_SHA1_MB is not set
+# CONFIG_CRYPTO_SHA1_SSSE3 is not set
+# CONFIG_CRYPTO_SHA256_SSSE3 is not set
+# CONFIG_CRYPTO_SHA512_SSSE3 is not set
+# CONFIG_CRYPTO_SKEIN is not set
+# CONFIG_CRYPTO_THREEFISH is not set
+# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
+# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
+# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_EFI is not set
+CONFIG_FB=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_VESA is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_GART_IOMMU=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CPU=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_HAVE_ACPI_APEI=y
+CONFIG_HAVE_ACPI_APEI_NMI=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_FENTRY=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HID=y
+CONFIG_HID_BATTERY_STRENGTH=y
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+# CONFIG_HP_ACCEL is not set
+CONFIG_HW_RANDOM_INTEL=y
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HYPERVISOR_GUEST=y
+# CONFIG_I7300_IDLE is not set
+# CONFIG_IA32_EMULATION is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_INTEL_IPS is not set
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_INTEL_MIC_BUS is not set
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_IOMMU_HELPER=y
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_ITCO_VENDOR_SUPPORT is not set
+CONFIG_ITCO_WDT=y
+# CONFIG_KVM_DEBUG_FS is not set
+CONFIG_KVM_GUEST=y
+CONFIG_LPC_ICH=y
+# CONFIG_MAXSMP is not set
+CONFIG_MEMORY_BALLOON=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MFD_CORE=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MPSC is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=8
+# CONFIG_NUMA is not set
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_CLOCK=y
+# CONFIG_PARAVIRT_DEBUG is not set
+# CONFIG_PARAVIRT_SPINLOCKS is not set
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCI_IOAPIC is not set
+CONFIG_PCI_LABEL=y
+# CONFIG_PCI_MMCONFIG is not set
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+# CONFIG_PVPANIC is not set
+CONFIG_QUEUE_RWLOCK=y
+CONFIG_RAS=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+# CONFIG_SAMSUNG_Q10 is not set
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SLUB_CPU_PARTIAL=y
+CONFIG_SMP=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_MANUAL=y
+# CONFIG_SPARSEMEM_VMEMMAP is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_TOSHIBA_BT_RFKILL is not set
+CONFIG_TREE_RCU=y
+# CONFIG_UNISYSSPAR is not set
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VMWARE_BALLOON=y
+CONFIG_VMWARE_PVSCSI=y
+CONFIG_VMWARE_VMCI=y
+CONFIG_VMWARE_VMCI_VSOCKETS=y
+CONFIG_VMXNET3=y
+CONFIG_VSOCKETS=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_X86_64=y
+CONFIG_X86_64_SMP=y
+# CONFIG_X86_ACPI_CPUFREQ is not set
+CONFIG_X86_CMOV=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_X86_HT=y
+# CONFIG_X86_INTEL_LPSS is not set
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_PCC_CPUFREQ is not set
+CONFIG_X86_PM_TIMER=y
+CONFIG_X86_TSC=y
+# CONFIG_XEN is not set
+CONFIG_XPS=y
+CONFIG_ZONE_DMA32=y
--- /dev/null
+ARCH:=x86_64
+BOARDNAME:=x86_64
+DEFAULT_PACKAGES += kmod-acpi-button kmod-button-hotplug kmod-e1000e kmod-e1000 kmod-r8169
+ARCH_PACKAGES:=x86_64
+MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
+
+define Target/Description
+ Build images for 64 bit systems including virtualized guests.
+endef
--- /dev/null
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=i386
+BOARD:=x86
+BOARDNAME:=x86
+FEATURES:=squashfs ext4 vdi vmdk pcmcia targz
+SUBTARGETS=generic xen_domu kvm_guest 64
+MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
+
+KERNEL_PATCHVER:=3.18
+
+KERNELNAME:=bzImage
+
+include $(INCLUDE_DIR)/target.mk
+
+$(eval $(call BuildTarget))
+
+$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \
+ Please install mkisofs. \
+))
--- /dev/null
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+ option ip6assign 60
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
+
+config interface wan6
+ option ifname eth1
+ option proto dhcpv6
+
+config globals globals
+ option ula_prefix auto
--- /dev/null
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyS0::askfirst:/bin/ash --login
+tty1::askfirst:/bin/ash --login
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2010 Vertical Communications
+
+do_mount_procfs() {
+ mount -o noatime -t proc none /proc
+}
+
--- /dev/null
+check_for_iso() {
+ grep -qE '/dev/root.*iso9660' /proc/mounts && ramoverlay
+}
+
+boot_hook_add preinit_mount_root check_for_iso
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2012-2015 OpenWrt.org
+
+move_config() {
+ . /lib/upgrade/platform.sh
+
+ if platform_export_bootpart; then
+ mount -t ext4 -o rw,noatime "$BOOTPART" /mnt
+ mv -f /mnt/sysupgrade.tgz /
+ umount /mnt
+ fi
+}
+
+boot_hook_add preinit_mount_root move_config
+
--- /dev/null
+platform_export_bootpart() {
+ local cmdline uuid disk
+
+ if read cmdline < /proc/cmdline; then
+ case "$cmdline" in
+ *block2mtd=*)
+ disk="${cmdline##*block2mtd=}"
+ disk="${disk%%,*}"
+ ;;
+ *root=*)
+ disk="${cmdline##*root=}"
+ disk="${disk%% *}"
+ ;;
+ esac
+
+ case "$disk" in
+ PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02)
+ uuid="${disk#PARTUUID=}"
+ uuid="${uuid%-02}"
+ for disk in /dev/[hsv]d[a-z]; do
+ set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
+ if [ "$4$3$2$1" = "$uuid" ]; then
+ export BOOTPART="${disk}1"
+ return 0
+ fi
+ done
+ ;;
+ /dev/*)
+ export BOOTPART="${disk%[0-9]}1"
+ return 0
+ ;;
+ esac
+ fi
+
+ return 1
+}
+
+platform_check_image() {
+ [ "$#" -gt 1 ] && return 1
+
+ case "$(get_magic_word "$1")" in
+ eb48|eb63) return 0;;
+ *)
+ echo "Invalid image type"
+ return 1
+ ;;
+ esac
+}
+
+platform_copy_config() {
+ if [ -b "$BOOTPART" ]; then
+ mount -t ext4 -o rw,noatime "$BOOTPART" /mnt
+ cp -af "$CONF_TAR" /mnt/
+ umount /mnt
+ fi
+}
+
+platform_do_upgrade() {
+ platform_export_bootpart
+
+ if [ -b "${BOOTPART%[0-9]}" ]; then
+ sync
+ get_image "$@" | dd of="${BOOTPART%[0-9]}" bs=4096 conv=fsync
+ sleep 1
+ fi
+}
--- /dev/null
+# CONFIG_60XX_WDT is not set
+# CONFIG_64BIT is not set
+# CONFIG_ACPI is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIX is not set
+CONFIG_AMD_NB=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+# CONFIG_ARCH_RANDOM is not set
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUE_RWLOCK=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ATA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_ATA_PIIX=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BOUNCE=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMPAT_VDSO=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPU5_WDT is not set
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AES_586=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32_PCLMUL is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
+# CONFIG_CX_ECAT is not set
+CONFIG_DCACHE_WORD_ACCESS=y
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DELL_RBU is not set
+# CONFIG_DMI is not set
+CONFIG_DNOTIFY=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_EDD is not set
+# CONFIG_EUROTECH_WDT is not set
+CONFIG_EXT4_FS=y
+# CONFIG_F71808E_WDT is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GLOB=y
+# CONFIG_GOOGLE_FIRMWARE is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_HPET_TIMER=y
+# CONFIG_HP_WATCHDOG is not set
+CONFIG_HT_IRQ=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_GEODE=y
+CONFIG_HW_RANDOM_VIA=y
+# CONFIG_HYPERVISOR_GUEST is not set
+CONFIG_HZ_PERIODIC=y
+CONFIG_I8253_LOCK=y
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_RTL is not set
+# CONFIG_IE6XX_WDT is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INSTRUCTION_DECODER=y
+# CONFIG_INTEL_POWERCLAMP is not set
+# CONFIG_IOMMU_STRESS is not set
+# CONFIG_IOSF_MBI is not set
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+# CONFIG_IO_DELAY_UDELAY is not set
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
+# CONFIG_ITCO_WDT is not set
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACHZ_WDT is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MATOM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MELAN is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_MICROCODE_AMD_EARLY is not set
+# CONFIG_MICROCODE_INTEL_EARLY is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+CONFIG_NAMESPACES=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET5501 is not set
+# CONFIG_NET_NS is not set
+CONFIG_NOHIGHMEM=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=1
+# CONFIG_NSC_GPIO is not set
+# CONFIG_NTB is not set
+CONFIG_NVRAM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+# CONFIG_OLPC is not set
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_OPTIMIZE_INLINING is not set
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_PC87413_WDT is not set
+CONFIG_PCI=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_MSI=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_EVENTS_INTEL_UNCORE=y
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_PMC_ATOM=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PROCESSOR_SELECT is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_GZIP=y
+# CONFIG_RELOCATABLE is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCSI=y
+CONFIG_SCx200=y
+CONFIG_SCx200HR_TIMER=y
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_SCx200_WDT is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TELCLOCK is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_GOV_STEP_WISE=y
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_TOSHIBA is not set
+CONFIG_UID16=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USER_NS is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VIA_WDT is not set
+CONFIG_VM86=y
+# CONFIG_VMWARE_VMCI is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_WAFER_WDT is not set
+CONFIG_X86=y
+# CONFIG_X86_16BIT is not set
+CONFIG_X86_32=y
+# CONFIG_X86_32_IRIS is not set
+CONFIG_X86_32_LAZY_GS=y
+CONFIG_X86_ALIGNMENT_16=y
+# CONFIG_X86_ANCIENT_MCE is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# CONFIG_X86_CPUID is not set
+# CONFIG_X86_DECODER_SELFTEST is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_FEATURE_NAMES=y
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_INTEL_PSTATE is not set
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_LOCAL_APIC=y
+# CONFIG_X86_LONGRUN is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_AMD=y
+# CONFIG_X86_MCE_INJECT is not set
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_MSR=y
+# CONFIG_X86_P4_CLOCKMOD is not set
+# CONFIG_X86_PAE is not set
+CONFIG_X86_PAT=y
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_X86_POWERNOW_K6 is not set
+# CONFIG_X86_POWERNOW_K7 is not set
+CONFIG_X86_PPRO_FENCE=y
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_RESERVE_LOW=64
+# CONFIG_X86_SMAP is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_SPEEDSTEP_ICH is not set
+# CONFIG_X86_SPEEDSTEP_LIB is not set
+# CONFIG_X86_SPEEDSTEP_SMI is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_APIC_MSI=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_ZLIB_INFLATE=y
+# CONFIG_ZONE_DMA32 is not set
--- /dev/null
+# CONFIG_3C515 is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_8129=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_ALIX=y
+# CONFIG_ATA_PIIX is not set
+CONFIG_CS5535_CLOCK_EVENT_SRC=y
+CONFIG_CS5535_MFGPT=y
+CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
+CONFIG_DMI=y
+# CONFIG_DMIID is not set
+# CONFIG_DMI_SYSFS is not set
+# CONFIG_EISA is not set
+# CONFIG_EL3 is not set
+CONFIG_GEODE_WDT=y
+CONFIG_GEOS=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_CS5535=y
+CONFIG_GPIO_DEVRES=y
+# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_INTEL_MID is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HWMON=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=y
+CONFIG_I2C_ALGOPCF=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_ISA=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_LANCE is not set
+# CONFIG_LEDS_CLEVO_MAIL is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_M486 is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_CS5535=y
+CONFIG_MGEODEGX1=y
+# CONFIG_MIXCOMWD is not set
+CONFIG_NATSEMI=y
+CONFIG_NET5501=y
+CONFIG_NLS=y
+CONFIG_NSC_GPIO=y
+CONFIG_PATA_CS5520=y
+CONFIG_PATA_CS5530=y
+CONFIG_PATA_CS5535=y
+CONFIG_PATA_CS5536=y
+CONFIG_PATA_SC1200=y
+CONFIG_PC8736x_GPIO=y
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_PNP is not set
+CONFIG_SC1200_WDT=y
+CONFIG_SCx200_ACB=y
+CONFIG_SCx200_WDT=y
+CONFIG_SENSORS_LM90=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_VIA_RHINE=y
+CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_WDT is not set
+CONFIG_X86_CPUID=y
+CONFIG_X86_DEBUGCTLMSR=y
+# CONFIG_X86_MCE is not set
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_X86_TSC=y
--- /dev/null
+BOARDNAME:=AMD Geode based systems
+FEATURES:=squashfs ext4 pci usb gpio
+DEFAULT_PACKAGES += \
+ kmod-crypto-hw-geode kmod-crypto-ocf kmod-crypto-cbc \
+ kmod-ath5k kmod-ath9k \
+ kmod-button-hotplug \
+ kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
+ kmod-ledtrig-netdev hwclock wpad-mini
+
+CPU_TYPE := geode
+
+define Target/Description
+ Build firmware images for AMD Geode GX/LX based systems (net5501, alix, geos)
+endef
--- /dev/null
+config X86_ETHERBOOT_IMAGES
+ bool "Build Etherboot image"
+ depends on TARGET_x86_thincan_DBE61
+ default y
+ help
+ Builds network bootable image for ThinCan DBE61 (Etherboot BIOS)
+
+config X86_ETHERBOOT_BOOTOPTS
+ string "Extra kernel boot options"
+ depends on X86_ETHERBOOT_IMAGES
+ default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS
+ default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61"
+ help
+ Kernel arguments to pass to the kernel eg. NFS root location etc.
--- /dev/null
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+export PATH=$(TARGET_PATH):/sbin
+
+GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
+GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE =
+
+USE_ATKBD = generic kvm_guest
+
+ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)))),)
+ GRUB2_MODULES += at_keyboard
+ GRUB2_MODULES_ISO += at_keyboard
+endif
+
+ifneq ($(CONFIG_GRUB_CONSOLE),)
+ GRUB_CONSOLE_CMDLINE += console=tty0
+ GRUB_TERMINALS += console
+endif
+
+GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
+
+ifneq ($(GRUB_SERIAL),)
+ GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8
+ GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=off
+ GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+ GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
+endif
+
+SIGNATURE:=$(shell dd if=/dev/urandom bs=4 count=1 2>/dev/null | hexdump -v -e '"%08x"')
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(SIGNATURE)-02)
+
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
+
+ifneq ($(CONFIG_GRUB_IMAGES),)
+
+ BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
+
+ define Image/cmdline/ext4
+ root=$(ROOTPART) rootfstype=ext4 rootwait
+ endef
+
+ define Image/cmdline/jffs2-64k
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
+ endef
+
+ define Image/cmdline/jffs2-128k
+ block2mtd.block2mtd=$(ROOTPART),131072,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
+ endef
+
+ define Image/cmdline/squashfs
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=squashfs rootwait
+ endef
+
+ define Image/Build/grub2
+ # left here because the image builder doesnt need these
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
+ -o $(KDIR)/grub2/core.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES)
+ $(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
+ echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ ./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ PADDING="$(CONFIG_TARGET_IMAGES_PAD)" SIGNATURE="$(SIGNATURE)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
+ 256
+ grub-bios-setup \
+ --device-map="$(KDIR)/grub2/device.map" \
+ -d "$(KDIR)/grub2" \
+ -r "hd0,msdos1" \
+ "$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
+ $(call Image/Build/grub/$(1))
+ endef
+endif
+
+ROOTDELAY=10
+
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
+define Image/Build/iso
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
+ -o $(KDIR)/grub2/eltorito.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES_ISO)
+ cat \
+ $(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \
+ $(KDIR)/grub2/eltorito.img \
+ > $(KDIR)/root.grub/boot/grub/eltorito.img
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ ./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \
+ -o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
+endef
+
+ifneq ($(CONFIG_VDI_IMAGES),)
+ define Image/Build/vdi
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
+ qemu-img convert -f raw -O vdi \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
+ # XXX: VBoxManage insists on setting perms to 0600
+ chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
+ endef
+endif
+
+ifneq ($(CONFIG_VMDK_IMAGES),)
+ define Image/Build/vmdk
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
+ qemu-img convert -f raw -O vmdk \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
+ endef
+endif
+
+define Image/Build/gzip
+ gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
+ gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
+endef
+
+ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
+ define Image/Build/gzip/ext4
+ $(call Image/Build/gzip,ext4)
+ endef
+ ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
+ define Image/Build/gzip/squashfs
+ $(call Image/Build/gzip,squashfs)
+ endef
+ define Image/Build/gzip/jffs2-64k
+ $(call Image/Build/gzip,jffs2-64k)
+ endef
+ define Image/Build/gzip/jffs2-128k
+ $(call Image/Build/gzip,jffs2-128k)
+ endef
+ endif
+endif
+
+define Image/BuildKernel
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+ ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
+ rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
+ $(STAGING_DIR_HOST)/bin/mkelfImage \
+ --append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
+ $(KDIR)/bzImage \
+ $(BIN_DIR)/$(IMG_PREFIX)-etherboot
+ endif
+endef
+
+define Image/Build/Profile/ar525w
+ cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
+ $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32
+ $(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img
+ $(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img
+endef
+
+define Image/Build/Profile/sitecom
+ cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
+ #32k config data + 20 bytes header + 2 bytes checksum after kernel image
+ $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790
+ $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img
+ cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
+ cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img
+ rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp
+endef
+
+define Image/Build/Profile/bifferboard
+ $(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img
+endef
+
+define Image/Prepare
+ $(call Image/Prepare/grub2)
+endef
+
+define Image/Build/Initramfs
+ $(CP) $(KDIR)/bzImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage
+endef
+
+define Image/Build
+ $(call Image/Build/$(1))
+ ifneq ($(1),iso)
+ $(call Image/Build/grub2,$(1))
+ $(call Image/Build/vdi,$(1))
+ $(call Image/Build/vmdk,$(1))
+ $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
+ else
+ $(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso
+ endif
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+ $(call Image/Build/gzip/$(1))
+ $(call Image/Build/Profile/$(PROFILE),$(1))
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+ $(call Image/Build/Initramfs)
+endif
+endef
+
+$(eval $(call BuildImage))
--- /dev/null
+#!/usr/bin/env bash
+# Copyright (C) 2006-2012 OpenWrt.org
+set -x
+[ $# == 5 -o $# == 6 ] || {
+ echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image> [<align>]"
+ exit 1
+}
+
+OUTPUT="$1"
+KERNELSIZE="$2"
+KERNELDIR="$3"
+ROOTFSSIZE="$4"
+ROOTFSIMAGE="$5"
+ALIGN="$6"
+
+rm -f "$OUTPUT"
+
+head=16
+sect=63
+cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512)))
+
+# create partition table
+set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m ${ALIGN:+-l $ALIGN} ${SIGNATURE:+-S 0x$SIGNATURE}`
+
+KERNELOFFSET="$(($1 / 512))"
+KERNELSIZE="$2"
+ROOTFSOFFSET="$(($3 / 512))"
+ROOTFSSIZE="$(($4 / 512))"
+
+[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE"
+dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc
+
+[ -n "$NOGRUB" ] && exit 0
+
+make_ext4fs -J -l "$KERNELSIZE" "$OUTPUT.kernel" "$KERNELDIR"
+dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc
+rm -f "$OUTPUT.kernel"
--- /dev/null
+configfile (hd0,msdos1)/boot/grub/grub.cfg
--- /dev/null
+@SERIAL_CONFIG@
+@TERMINAL_CONFIG@
+
+set default="0"
+set timeout="@TIMEOUT@"
+set root='(cd)'
+
+menuentry "libreCMC" {
+ linux /boot/vmlinuz @CMDLINE@ noinitrd
+}
--- /dev/null
+@SERIAL_CONFIG@
+@TERMINAL_CONFIG@
+
+set default="0"
+set timeout="@TIMEOUT@"
+set root='(hd0,msdos1)'
+
+menuentry "libreCMC" {
+ linux /boot/vmlinuz @CMDLINE@ noinitrd
+}
+menuentry "libreCMC (failsafe)" {
+ linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd
+}
--- /dev/null
+#!/usr/bin/env python
+
+"""
+ Create firmware for 4/8MB Bifferboards, suitable for uploading using
+ either bb_upload8.py or bb_eth_upload8.py
+"""
+
+import struct, sys
+
+# Increase the kmax value if the script gives errors about the kernel being
+# too large. You need to set the Biffboot kmax value to the same value you
+# use here.
+kmax = 0x10
+
+# No need to change this for 4MB devices, it's only used to tell you if
+# the firmware is too large!
+flash_size = 0x800000
+
+# This is always the same, for 1MB, 4MB and 8MB devices
+config_extent = 0x6000
+
+kernel_extent = kmax * 0x10000
+
+if __name__ == "__main__":
+
+ if len(sys.argv) != 4:
+ print "usage: mkimg_bifferboard.py <kernel> <rootfs> <output file>"
+ sys.exit(-1)
+
+ bzimage = sys.argv[1]
+ rootfs = sys.argv[2]
+ target = sys.argv[3]
+
+ # Kernel first
+ fw = file(bzimage).read()
+ if len(fw) > (kernel_extent - config_extent):
+ raise IOError("Kernel too large")
+
+ # Pad up to end of kernel partition
+ while len(fw) < (kernel_extent - config_extent):
+ fw += "\xff"
+
+ fw += file(rootfs).read()
+
+ # Check length of total
+ if len(fw) > (flash_size - 0x10000 - config_extent):
+ raise IOError("Rootfs too large")
+
+ file(target,"wb").write(fw)
+ print "Firmware written to '%s'" % target
--- /dev/null
+#!/usr/bin/perl
+
+open (bzimg, @ARGV[0]);
+while (<bzimg>) { $i .= $_; }
+$i .= pack "v", -(unpack "%v*", $i);
+print "CSYS";
+print pack("V", length($i));
+print pack("V", 0);
+print "WRRM";
+print pack("V", length($i));
+print $i;
--- /dev/null
+CONFIG_ACPI=y
+# CONFIG_ACPI_AC is not set
+# CONFIG_ACPI_BATTERY is not set
+CONFIG_ACPI_BUTTON=y
+# CONFIG_ACPI_CMPC is not set
+# CONFIG_ACPI_CONTAINER is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DOCK is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+# CONFIG_ACPI_FAN is not set
+# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
+CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_PROCESSOR=y
+# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
+# CONFIG_ACPI_PROCFS_POWER is not set
+# CONFIG_ACPI_SBS is not set
+# CONFIG_ACPI_THERMAL is not set
+# CONFIG_ACPI_WMI is not set
+CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+# CONFIG_ASUS_LAPTOP is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_EEEPC_LAPTOP is not set
+# CONFIG_EFI is not set
+CONFIG_HAVE_ACPI_APEI=y
+CONFIG_HAVE_ACPI_APEI_NMI=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_IBM is not set
+CONFIG_HOTPLUG_PCI_PCIE=y
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HPET is not set
+# CONFIG_HP_ACCEL is not set
+CONFIG_HVC_DRIVER=y
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HYPERVISOR_GUEST=y
+# CONFIG_INTEL_IPS is not set
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_KVM is not set
+# CONFIG_KVM_DEBUG_FS is not set
+CONFIG_KVM_GUEST=y
+# CONFIG_LGUEST is not set
+# CONFIG_LGUEST_GUEST is not set
+CONFIG_NO_HZ=y
+# CONFIG_M486 is not set
+CONFIG_MPENTIUM4=y
+CONFIG_NR_CPUS=4
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_CLOCK=y
+# CONFIG_PARAVIRT_DEBUG is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
+CONFIG_PARAVIRT_TIME_ACCOUNTING=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+# CONFIG_PVPANIC is not set
+CONFIG_RAS=y
+# CONFIG_SAMSUNG_Q10 is not set
+# CONFIG_SCSI_VIRTIO is not set
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SLUB_CPU_PARTIAL=y
+CONFIG_SMP=y
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_TOSHIBA_BT_RFKILL is not set
+# CONFIG_VHOST_NET is not set
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_VIRTIO_NET is not set
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_VMWARE_BALLOON is not set
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_X86_32_SMP=y
+# CONFIG_X86_ACPI_CPUFREQ is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_E_POWERSAVER is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_HT=y
+# CONFIG_X86_INTEL_LPSS is not set
+CONFIG_X86_INTERNODE_CACHE_SHIFT=4
+CONFIG_X86_L1_CACHE_SHIFT=4
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_PAE=y
+# CONFIG_X86_PAT is not set
+# CONFIG_X86_PCC_CPUFREQ is not set
+CONFIG_X86_PM_TIMER=y
+# CONFIG_X86_PPRO_FENCE is not set
+# CONFIG_XEN is not set
--- /dev/null
+BOARDNAME:=KVM Guest
+FEATURES:=ext4 pci usb
+DEFAULT_PACKAGES += kmod-acpi-button kmod-button-hotplug kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
+CPU_TYPE := pentium4
--- /dev/null
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/rdc321x-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=RDC321x watchdog
+ DEPENDS:=@TARGET_x86_rdc
+ KCONFIG:=CONFIG_RDC321X_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
+endef
+
+define KernelPackage/rdc321x-wdt/description
+ RDC-321x watchdog driver
+endef
+
+$(eval $(call KernelPackage,rdc321x-wdt))
+
--- /dev/null
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d
+
+ /* We must finish initialization here */
+
++#ifdef CONFIG_X86_RDC321X
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
++
++ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
++ config_writel(socket, 35*4, 0x00000022);
++ config_writel(socket, 36*4, 0x60200000);
++ config_writel(socket, 40*4, 0x7e020000);
++#endif
++
+ if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
+ /* No IRQ or request_irq failed. Poll */
+ socket->cb_irq = 0; /* But zero is a valid IRQ number. */
--- /dev/null
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -531,6 +531,8 @@ config X86_RDC321X
+ depends on X86_EXTENDED_PLATFORM
+ select M486
+ select X86_REBOOTFIXUPS
++ select EMBEDDED
++ select ARCH_REQUIRE_GPIOLIB
+ ---help---
+ This option is needed for RDC R-321x system-on-chip, also known
+ as R-8610-(G).
--- /dev/null
+--- /dev/null
++++ b/Documentation/x86/rdc.txt
+@@ -0,0 +1,69 @@
++
++Introduction
++============
++
++RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
++(system-on-chips) for a number of years. They are not the fastest of
++CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
++coupled with very low power consumption[1] and low cost make them ideal
++for embedded applications.
++
++
++Where to find
++=============
++
++RDC chips show up in numerous embedded devices, but be careful since
++many of them will not run Linux 2.6 without significant expertise.
++
++There are several variants of what the linux kernel refers to generically
++as RDC321X: R8610, R321x, S3282 and AMRISC20000.
++
++R321x: Found in various routers, see the OpenWrt project for details,
++ http://wiki.openwrt.org/oldwiki/rdcport
++
++R8610: Found on the RDC evaluation board
++ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
++
++AMRISC20000: Found in the MGB-100 wireless hard disk
++ http://tintuc.no-ip.com/linux/tipps/mgb100/
++
++S3282: Found in various NAS devices, including the Bifferboard
++ http://www.bifferos.com
++
++
++Kernel Configuration
++====================
++
++Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths
++emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
++(CONFIG_X86_MCE not selected).
++
++
++CPU detection
++=============
++
++None of these chips support the cpuid instruction, so as with some
++other x86 compatible SoCs, we must check the north bridge and look
++for specific 'signature' PCI device config.
++
++The current detection code has been tested only on the Bifferboard
++(S3282 CPU), please send bug reports or success stories with
++other devices to bifferos@yahoo.co.uk.
++
++
++Credits
++=======
++
++Many thanks to RDC for providing the customer codes to allow
++detection of all known variants, without which this detection code
++would have been very hard to ascertain.
++
++
++References
++==========
++
++[1] S3282 in certain NAS solutions consumes less than 1W
++
++
++mark@bifferos.com 2009
++
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -529,6 +529,7 @@ config X86_RDC321X
+ bool "RDC R-321x SoC"
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
++ select PCI
+ select M486
+ select X86_REBOOTFIXUPS
+ select EMBEDDED
+--- a/arch/x86/include/asm/processor.h
++++ b/arch/x86/include/asm/processor.h
+@@ -136,7 +136,8 @@ struct cpuinfo_x86 {
+ #define X86_VENDOR_CENTAUR 5
+ #define X86_VENDOR_TRANSMETA 7
+ #define X86_VENDOR_NSC 8
+-#define X86_VENDOR_NUM 9
++#define X86_VENDOR_RDC 9
++#define X86_VENDOR_NUM 10
+
+ #define X86_VENDOR_UNKNOWN 0xff
+
+--- a/arch/x86/kernel/cpu/Makefile
++++ b/arch/x86/kernel/cpu/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix
+ obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
+ obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
+ obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
++obj-$(CONFIG_X86_RDC321X) += rdc.o
+
+ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+
+--- /dev/null
++++ b/arch/x86/kernel/cpu/rdc.c
+@@ -0,0 +1,69 @@
++/*
++ * See Documentation/x86/rdc.txt
++ *
++ * mark@bifferos.com
++ */
++
++#include <linux/pci.h>
++#include <asm/pci-direct.h>
++#include "cpu.h"
++
++
++static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
++{
++ u16 vendor, device;
++ u32 customer_id;
++
++ if (!early_pci_allowed())
++ return;
++
++ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */
++ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
++ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
++
++ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
++ return; /* not RDC */
++ /*
++ * NB: We could go on and check other devices, e.g. r6040 NIC, but
++ * that's probably overkill
++ */
++
++ customer_id = read_pci_config(0, 0, 0, 0x90);
++
++ switch (customer_id) {
++ /* id names are from RDC */
++ case 0x00321000:
++ strcpy(c->x86_model_id, "R3210/R3211");
++ break;
++ case 0x00321001:
++ strcpy(c->x86_model_id, "AMITRISC20000/20010");
++ break;
++ case 0x00321002:
++ strcpy(c->x86_model_id, "R3210X/Edimax");
++ break;
++ case 0x00321003:
++ strcpy(c->x86_model_id, "R3210/Kcodes");
++ break;
++ case 0x00321004: /* tested */
++ strcpy(c->x86_model_id, "S3282/CodeTek");
++ break;
++ case 0x00321007:
++ strcpy(c->x86_model_id, "R8610");
++ break;
++ default:
++ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
++ break;
++ }
++
++ strcpy(c->x86_vendor_id, "RDC");
++ c->x86_vendor = X86_VENDOR_RDC;
++}
++
++static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
++ .c_vendor = "RDC",
++ .c_ident = { "RDC" },
++ .c_identify = rdc_identify,
++ .c_x86_vendor = X86_VENDOR_RDC,
++};
++
++cpu_dev_register(rdc_cpu_dev);
--- /dev/null
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+
+ quiet_cmd_lzma = LZMA $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+- lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++ lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
+ quiet_cmd_lzo = LZO $@
+--- a/arch/x86/include/asm/boot.h
++++ b/arch/x86/include/asm/boot.h
+@@ -23,7 +23,7 @@
+ #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+ #endif
+
+-#ifdef CONFIG_KERNEL_BZIP2
++#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
+ #define BOOT_HEAP_SIZE 0x400000
+ #else /* !CONFIG_KERNEL_BZIP2 */
+
--- /dev/null
+--- a/drivers/mtd/mtdblock.c
++++ b/drivers/mtd/mtdblock.c
+@@ -63,7 +63,7 @@ static void erase_callback(struct erase_
+ wake_up(wait_q);
+ }
+
+-static int erase_write (struct mtd_info *mtd, unsigned long pos,
++int erase_write (struct mtd_info *mtd, unsigned long pos,
+ int len, const char *buf)
+ {
+ struct erase_info erase;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -416,6 +416,9 @@ extern void register_mtd_user (struct mt
+ extern int unregister_mtd_user (struct mtd_notifier *old);
+ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+
++int erase_write (struct mtd_info *mtd, unsigned long pos,
++ int len, const char *buf);
++
+ void mtd_erase_callback(struct erase_info *instr);
+
+ static inline int mtd_is_bitflip(int err) {
--- /dev/null
+--- a/arch/x86/Makefile
++++ b/arch/x86/Makefile
+@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/
+ # See arch/x86/Kbuild for content of core part of the kernel
+ core-y += arch/x86/
+
++# RDC R-321X support
++core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
++
+ # drivers-y are linked after core-y
+ drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+ drivers-$(CONFIG_PCI) += arch/x86/pci/
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for the RDC321x specific parts of the kernel
++#
++obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
++
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/platform.c
+@@ -0,0 +1,115 @@
++/*
++ * Generic RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/physmap.h>
++#include <linux/root_dev.h>
++
++#include <asm/rdc_boards.h>
++
++static struct rdc_platform_data rdcplat_data;
++
++/* LEDS */
++static struct platform_device rdc321x_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &rdcplat_data.led_data,
++ }
++};
++
++/* Button */
++static struct platform_device rdc321x_buttons = {
++ .name = "gpio-keys-polled",
++ .id = -1,
++ .dev = {
++ .platform_data = &rdcplat_data.button_data,
++ }
++};
++
++static __initdata struct platform_device *rdc321x_devs[] = {
++ &rdc321x_leds,
++ &rdc321x_buttons,
++};
++
++const char *__initdata boards[] = {
++ "Sitecom",
++ "AR525W",
++ "Bifferboard",
++ "R8610",
++ 0
++};
++
++static struct map_info rdc_map_info = {
++ .name = "rdc_flash",
++ .size = 0x800000, /* 8MB */
++ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */
++ .bankwidth = 2,
++};
++
++static int __init rdc_board_setup(void)
++{
++ struct mtd_info *mtdinfo;
++ struct mtd_part_parser_data *ppdata;
++ int res;
++
++ simple_map_init(&rdc_map_info);
++
++ while (1) {
++ rdc_map_info.virt = ioremap(rdc_map_info.phys,
++ rdc_map_info.size);
++ if (rdc_map_info.virt == NULL)
++ continue;
++
++ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
++ if (mtdinfo == NULL)
++ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
++ if (mtdinfo != NULL)
++ break;
++
++ iounmap(rdc_map_info.virt);
++ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */
++ panic("RDC321x: Could not find start of flash!");
++ rdc_map_info.phys = (u32) -rdc_map_info.size;
++ }
++
++ /*
++ * TODO: add a new field to mtd_part_parser_data, and use that
++ * instead of this ugly casting
++ */
++ ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
++ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
++ if (res) {
++ panic("RDC321x: can't identify board type");
++ return -ENOSYS;
++ }
++
++ ROOT_DEV = 0;
++
++ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
++}
++late_initcall(rdc_board_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/ar525w.c
+@@ -0,0 +1,251 @@
++/*
++ * ar525w RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/vmalloc.h>
++#include <linux/mtd/mtd.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++ char magic[4]; /* ASICII: GMTK */
++ u32 checksum; /* CRC32 */
++ u32 version; /* x.x.x.x */
++ u32 kernelsz; /* The size of the kernel image */
++ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */
++ u32 pid; /* Product ID */
++ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */
++ u32 reserved;
++};
++
++static struct gpio_led ar525w_leds[] = {
++ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
++};
++static struct gpio_keys_button ar525w_btns[] = {
++ {
++ .gpio = 6,
++ .code = BTN_0,
++ .desc = "Reset",
++ .active_low = 1,
++ }
++};
++
++static u32 __initdata crctab[257] = {
++ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
++ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
++ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
++ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
++ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
++ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
++ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
++ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
++ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
++ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
++ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
++ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
++ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
++ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
++ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
++ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
++ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
++ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
++ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
++ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
++ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
++ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
++ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
++ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
++ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
++ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
++ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
++ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
++ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
++ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
++ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
++ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
++ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
++ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
++ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
++ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
++ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
++ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
++ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
++ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
++ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
++ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
++ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
++ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
++ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
++ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
++ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
++ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
++ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
++ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
++ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
++ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
++ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
++ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
++ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
++ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
++ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
++ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
++ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
++ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
++ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
++ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
++ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
++ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
++ 0
++};
++
++static u32 __init crc32(u8 * buf, u32 len)
++{
++ register int i;
++ u32 sum;
++ register u32 s0;
++ s0 = ~0;
++ for (i = 0; i < len; i++) {
++ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
++ }
++ sum = ~s0;
++ return sum;
++}
++
++static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
++{
++ char *buffer;
++ int res;
++ u32 bufferlength = header->kernelsz + sizeof(struct image_header);
++ u32 len;
++ static char crcbuf[0x400];
++
++ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
++ header->imagesz, bufferlength);
++
++ buffer = vmalloc(bufferlength);
++ if (!buffer) {
++ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
++ return -ENOMEM;
++ }
++
++ res = mtd_read(master, 0x0, bufferlength, &len, buffer);
++ if (res || len != bufferlength)
++ goto out;
++
++ header = (struct image_header *) buffer;
++ header->imagesz = bufferlength;
++ header->checksum = 0;
++ header->fastcksum = 0;
++
++ memcpy(crcbuf, buffer, 0x100);
++ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
++ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
++
++ header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
++ header->checksum = crc32(buffer, bufferlength);
++
++ res = mtd_unlock(master, 0, master->erasesize);
++ if (res != 0 && res != -EOPNOTSUPP) {
++ printk(KERN_ERR "Can't unlock image header\n");
++ goto out;
++ }
++
++ res = erase_write (master, 0, master->erasesize, buffer);
++ if (res)
++ printk(KERN_ERR "Can't rewrite image header\n");
++
++out:
++ vfree(buffer);
++ return res;
++}
++
++static int __init
++parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct image_header header;
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++ if (master->size != 0x400000) //4MB
++ return -ENOSYS;
++
++ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header);
++ if (res)
++ return res;
++
++ if (strncmp(header.magic, "GMTK", 4))
++ return -ENOSYS;
++
++ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
++ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
++ return -EINVAL;
++ }
++
++ if (header.kernelsz + sizeof(header) != header.imagesz) {
++ res = fixup_ar525w_header(master, &header);
++ if (res)
++ return res;
++ }
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++ rdc_flash_parts[0].name = "firmware";
++ rdc_flash_parts[0].offset = 0x0;
++ rdc_flash_parts[0].size = 0x3E0000;
++ rdc_flash_parts[1].name = "rootfs";
++ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
++ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
++ rdc_flash_parts[2].name = "bootloader";
++ rdc_flash_parts[2].offset = 0x3E0000;
++ rdc_flash_parts[2].size = 0x20000;
++
++ *pparts = rdc_flash_parts;
++
++ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
++ pdata->led_data.leds = ar525w_leds;
++ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
++ pdata->button_data.buttons = ar525w_btns;
++
++ return 3;
++}
++
++static struct mtd_part_parser __initdata ar525w_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_ar525w_partitions,
++ .name = "AR525W",
++};
++
++static int __init ar525w_setup(void)
++{
++ return register_mtd_parser(&ar525w_parser);
++}
++
++arch_initcall(ar525w_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
+@@ -0,0 +1,74 @@
++/*
++ * Bifferboard RDC321x platform devices
++ *
++ * Copyright (C) 2010 bifferos@yahoo.co.uk
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_bifferboard_partitions(struct mtd_info *master,
++ struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ u32 kernel_len;
++ u16 tmp;
++
++ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
++ if (res)
++ return res;
++ kernel_len = tmp * master->erasesize;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++ *pparts = rdc_flash_parts;
++
++ rdc_flash_parts[0].name = "kernel";
++ rdc_flash_parts[0].offset = 0;
++ rdc_flash_parts[0].size = kernel_len;
++ rdc_flash_parts[1].name = "rootfs";
++ rdc_flash_parts[1].offset = kernel_len;
++ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
++ rdc_flash_parts[2].name = "biffboot";
++ rdc_flash_parts[2].offset = master->size - 0x10000;
++ rdc_flash_parts[2].size = 0x10000;
++
++ return 3;
++}
++
++struct mtd_part_parser __initdata bifferboard_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_bifferboard_partitions,
++ .name = "Bifferboard",
++};
++
++static int __init bifferboard_setup(void)
++{
++ return register_mtd_parser(&bifferboard_parser);
++}
++arch_initcall(bifferboard_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/r8610.c
+@@ -0,0 +1,69 @@
++/*
++ * R8610 RDC321x platform devices
++ *
++ * Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct mtd_partition *rdc_flash_parts;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
++
++ *pparts = rdc_flash_parts;
++
++ rdc_flash_parts[0].name = "kernel";
++ rdc_flash_parts[0].size = 0x001f0000;
++ rdc_flash_parts[0].offset = 0;
++ rdc_flash_parts[1].name = "config";
++ rdc_flash_parts[1].size = 0x10000;
++ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[2].name = "rootfs";
++ rdc_flash_parts[2].size = 0x1E0000;
++ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[3].name = "redboot";
++ rdc_flash_parts[3].size = 0x20000;
++ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
++ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
++
++ return 4;
++}
++
++struct mtd_part_parser __initdata r8610_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_r8610_partitions,
++ .name = "R8610",
++};
++
++static int __init r8610_setup(void)
++{
++ return register_mtd_parser(&r8610_parser);
++}
++
++arch_initcall(r8610_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/sitecom.c
+@@ -0,0 +1,115 @@
++/*
++ * Sitecom RDC321x platform devices
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++ char magic[4];
++ u32 kernel_length;
++ u32 ramdisk_length;
++ char magic2[4];
++ u32 kernel_length2;
++};
++
++static struct gpio_led sitecom_leds[] = {
++ { .name = "rdc321x:power", .gpio = 15, .active_low = 1},
++ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
++ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
++};
++
++static struct gpio_keys_button sitecom_btns[] = {
++ {
++ .gpio = 6,
++ .code = BTN_0,
++ .desc = "Reset",
++ .active_low = 1,
++ }
++};
++
++static int __init
++parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++ struct mtd_part_parser_data *plat_data)
++{
++ struct image_header header;
++ int res;
++ size_t len;
++ struct mtd_partition *rdc_flash_parts;
++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++ if (master->size != 0x400000) /* 4MB */
++ return -ENOSYS;
++
++ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header);
++ if (res)
++ return res;
++
++ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
++ return -ENOSYS;
++
++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
++
++ rdc_flash_parts[0].name = "firmware";
++ rdc_flash_parts[0].offset = 0x8000;
++ rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
++ rdc_flash_parts[1].name = "config";
++ rdc_flash_parts[1].offset = 0;
++ rdc_flash_parts[1].size = 0x8000;
++ rdc_flash_parts[2].name = "kernel";
++ rdc_flash_parts[2].offset = 0x8014;
++ rdc_flash_parts[2].size = header.kernel_length;
++ rdc_flash_parts[3].name = "rootfs";
++ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
++ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
++ rdc_flash_parts[4].name = "bootloader";
++ rdc_flash_parts[4].offset = 0x3F0000;
++ rdc_flash_parts[4].size = 0x10000;
++
++ *pparts = rdc_flash_parts;
++
++ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
++ pdata->led_data.leds = sitecom_leds;
++ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
++ pdata->button_data.buttons = sitecom_btns;
++
++ return 5;
++}
++
++struct mtd_part_parser __initdata sitecom_parser = {
++ .owner = THIS_MODULE,
++ .parse_fn = parse_sitecom_partitions,
++ .name = "Sitecom",
++};
++
++static int __init sitecom_setup(void)
++{
++ return register_mtd_parser(&sitecom_parser);
++}
++
++arch_initcall(sitecom_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/reboot.c
+@@ -0,0 +1,44 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++static void rdc321x_reset(void)
++{
++ unsigned i;
++
++ /* write to southbridge config register 0x41
++ enable pci reset on cpu reset, make internal port 0x92 writeable
++ and switch port 0x92 to internal */
++ outl(0x80003840, 0xCF8);
++ i = inl(0xCFC);
++ i |= 0x1600;
++ outl(i, 0xCFC);
++
++ /* soft reset */
++ outb(1, 0x92);
++}
++
++static int __init rdc_setup_reset(void)
++{
++ machine_ops.emergency_restart = rdc321x_reset;
++ return 0;
++}
++
++arch_initcall(rdc_setup_reset);
+--- /dev/null
++++ b/arch/x86/include/asm/rdc_boards.h
+@@ -0,0 +1,36 @@
++/*
++ * RDC321x boards
++ *
++ * Copyright (C) 2007-2009 OpenWrt.org
++ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ * Boston, MA 02110-1301, USA.
++ *
++ */
++
++#ifndef _RDC_BOARDS_H__
++#define _RDC_BOARDS_H__
++
++#include <linux/leds.h>
++#include <linux/gpio_keys.h>
++
++struct rdc_platform_data {
++ struct gpio_led_platform_data led_data;
++ struct gpio_keys_platform_data button_data;
++};
++
++#endif
--- /dev/null
+--- a/drivers/mfd/rdc321x-southbridge.c
++++ b/drivers/mfd/rdc321x-southbridge.c
+@@ -85,6 +85,8 @@ static int rdc321x_sb_probe(struct pci_d
+ rdc321x_gpio_pdata.sb_pdev = pdev;
+ rdc321x_wdt_pdata.sb_pdev = pdev;
+
++ panic_on_unrecovered_nmi = 1;
++
+ return mfd_add_devices(&pdev->dev, -1,
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
+ NULL, 0, NULL);
--- /dev/null
+--- a/include/linux/timex.h
++++ b/include/linux/timex.h
+@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti
+ void ntp_notify_cmos_timer(void);
+
+ /* The clock frequency of the i8253/i8254 PIT */
++#ifdef CONFIG_X86_RDC321X
++#define PIT_TICK_RATE 1041816ul
++#else
+ #define PIT_TICK_RATE 1193182ul
++#endif
+
+ #endif /* LINUX_TIMEX_H */
--- /dev/null
+From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
+From: root <root@cent.localnet>
+Date: Sun, 6 Dec 2009 18:26:43 +0000
+Subject: [PATCH 03/14] kexec fix
+
+---
+ arch/x86/kernel/relocate_kernel_32.S | 6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+--- a/arch/x86/kernel/relocate_kernel_32.S
++++ b/arch/x86/kernel/relocate_kernel_32.S
+@@ -54,8 +54,10 @@ relocate_kernel:
+ movl %eax, CR0(%edi)
+ movl %cr3, %eax
+ movl %eax, CR3(%edi)
++#ifndef CONFIG_X86_RDC321X
+ movl %cr4, %eax
+ movl %eax, CR4(%edi)
++#endif
+
+ /* read the arguments and say goodbye to the stack */
+ movl 20+4(%esp), %ebx /* page_list */
+@@ -124,7 +126,9 @@ identity_mapped:
+ * Setting everything to zero seems safe.
+ */
+ xorl %eax, %eax
++#ifndef CONFIG_X86_RDC321X
+ movl %eax, %cr4
++#endif
+
+ jmp 1f
+ 1:
+@@ -195,8 +199,10 @@ identity_mapped:
+ ret
+
+ virtual_mapped:
++#ifndef CONFIG_X86_RDC321X
+ movl CR4(%edi), %eax
+ movl %eax, %cr4
++#endif
+ movl CR3(%edi), %eax
+ movl %eax, %cr3
+ movl CR0(%edi), %eax
--- /dev/null
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K stop
+tts/0::askfirst:/bin/ash --login
+hvc0::askfirst:/bin/ash --login
+tty1::askfirst:/bin/ash --login
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2010 OpenWrt.org
+
+do_mount_xenfs() {
+ [ -f /etc/modules.d/??-xenfs ] && {
+ insmod $(cat /etc/modules.d/??-xenfs)
+ mount -o noatime none /proc/xen -t xenfs
+ }
+}
+
+boot_hook_add preinit_mount_root do_mount_xenfs
--- /dev/null
+# CONFIG_APM is not set
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
+CONFIG_CPU_RMAP=y
+# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
+CONFIG_FREEZER=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_HIBERNATE_CALLBACKS=y
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_LGUEST_GUEST is not set
+# CONFIG_M486 is not set
+CONFIG_MMU_NOTIFIER=y
+CONFIG_MPENTIUM4=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NR_CPUS=4
+CONFIG_PARAVIRT=y
+CONFIG_PARAVIRT_CLOCK=y
+# CONFIG_PARAVIRT_DEBUG is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_PCI_XEN=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SCHED_MC=y
+CONFIG_SLUB_CPU_PARTIAL=y
+CONFIG_SMP=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+CONFIG_SWIOTLB_XEN=y
+CONFIG_SYS_HYPERVISOR=y
+CONFIG_TREE_RCU=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+# CONFIG_VMWARE_BALLOON is not set
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_X86_32_SMP=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_CMOV=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_X86_HT=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_PAE=y
+CONFIG_X86_TSC=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_XEN=y
+# CONFIG_XENFS is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_XEN_DEBUG_FS=y
+# CONFIG_XEN_DEV_EVTCHN is not set
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_XEN_HAVE_PVMMU=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=64
+# CONFIG_XEN_NETDEV_FRONTEND is not set
+# CONFIG_XEN_PCIDEV_FRONTEND is not set
+CONFIG_XEN_PRIVCMD=m
+# CONFIG_XEN_PRIVILEGED_GUEST is not set
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_SAVE_RESTORE=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_SCSI_FRONTEND=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+# CONFIG_XEN_WDT is not set
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XPS=y
--- /dev/null
+BOARDNAME:=Xen Paravirt Guest
+DEFAULT_PACKAGES += kmod-xen-fs kmod-xen-evtchn kmod-xen-netdev kmod-xen-kbddev
+FEATURES:=display ext4 targz
+CPU_TYPE := pentium4
projects / librecmc / librecmc-fossil.git / commitdiff