* Add support for MPC8247 based "IDS8247" board.
Changes for U-Boot 1.1.3:
======================================================================
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
* Add support for 2 x TSEC interfaces on the TQM8540 board.
* On LWMON we must use the watchdog to reset the board as the CPU
hymod_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 hymod
+IDS8247_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
IPHASE4539_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
--- /dev/null
+#
+# (C) Copyright 2005
+# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2005
+# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# IDS 8247 Board
+#
+
+# This should be equal to the CFG_FLASH_BASE define in config_IDS8247.h
+# for the "final" configuration, with U-Boot in flash, or the address
+# in RAM where U-Boot is loaded at for debugging.
+#
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#undef DEBUG
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH8
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#elif FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#else /* FLASH_PORT_WIDTH8 */
+#define FLASH_PORT_WIDTH uchar
+#define FLASH_PORT_WIDTHV vu_char
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPWV * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0;
+ int i;
+ volatile immap_t * immr = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immr->im_memctl;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+ size_b0 = flash_get_size ((FPW *) CFG_FLASH0_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ memctl->memc_or0 = 0xff800060;
+ memctl->memc_br0 = 0xff800801;
+
+ flash_get_offsets (0xff800000, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ (void) flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J3A:
+ printf ("28F320J3A\n");
+ break;
+ case FLASH_28F640J3A:
+ printf ("28F640J3A\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (FPWV * addr, flash_info_t * info)
+{
+ FPW value;
+
+ addr[0] = (FPW) 0x00900090;
+
+ value = addr[0];
+
+ debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
+
+ switch (value) {
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+#ifdef FLASH_PORT_WIDTH8
+ value = addr[2]; /* device ID */
+#else
+ value = addr[1]; /* device ID */
+#endif
+
+ debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
+
+ switch (value) {
+ case (FPW) INTEL_ID_28F320J3A:
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (FPW) INTEL_ID_28F640J3A:
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ }
+ }
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+
+ int i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#elif defined(FLASH_PORT_WIDTH32)
+ wp = (addr & ~3);
+ port_width = 4;
+#else
+ wp = addr;
+ port_width = 1;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ start = get_timer (0);
+
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 COL */
+ /* PA30 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
+ /* PA29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
+ /* PA28 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
+ /* PA27 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
+ /* PA26 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
+ /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */
+#if defined(CONFIG_SOFT_I2C)
+ /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */
+ /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */
+#else /* normal I/O port pins */
+ /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */
+ /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */
+#endif
+ /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */
+ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
+ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
+ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
+ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
+ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
+ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
+ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
+ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
+ /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */
+ /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */
+ /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */
+ /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */
+ /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
+ /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
+ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
+ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
+ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
+ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
+ /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
+ /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
+ /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
+ /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
+ /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
+ /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
+ /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
+ /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
+ /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
+ /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
+ /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */
+ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
+ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */
+ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
+ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */
+ /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
+ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
+ /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
+ /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
+ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
+ /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
+ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */
+ /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */
+ /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */
+ /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */
+ /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */
+ /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */
+ /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */
+ /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */
+ /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */
+ /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */
+#if defined(CONFIG_HARD_I2C)
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */
+#else /* normal I/O port pins */
+ /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */
+ /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */
+#endif
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
+ /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
+ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* MII_MDIO */
+ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Check Board Identity:
+ */
+int checkboard (void)
+{
+ puts ("Board: IDS 8247\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
+ ulong orx, volatile uchar * base)
+{
+ volatile uchar c = 0xff;
+ volatile uint *sdmr_ptr;
+ volatile uint *orx_ptr;
+ ulong maxsize, size;
+ int i;
+
+ /* We must be able to test a location outsize the maximum legal size
+ * to find out THAT we are outside; but this address still has to be
+ * mapped by the controller. That means, that the initial mapping has
+ * to be (at least) twice as large as the maximum expected size.
+ */
+ maxsize = (1 + (~orx | 0x7fff)) / 2;
+
+ sdmr_ptr = &memctl->memc_psdmr;
+ orx_ptr = &memctl->memc_or2;
+
+ *orx_ptr = orx;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ *sdmr_ptr = sdmr | PSDMR_OP_PREA;
+ *base = c;
+
+ *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *base = c;
+
+ *sdmr_ptr = sdmr | PSDMR_OP_MRW;
+ *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+
+ *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *base = c;
+
+ size = get_ram_size((long *)base, maxsize);
+ *orx_ptr = orx | ~(size - 1);
+
+ return (size);
+}
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+
+ long psize, lsize;
+
+ psize = 16 * 1024 * 1024;
+ lsize = 0;
+
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+#ifndef CFG_RAMBOOT
+ /* 60x SDRAM setup:
+ */
+ psize = try_init (memctl, CFG_PSDMR, CFG_OR2,
+ (uchar *) CFG_SDRAM_BASE);
+#endif /* CFG_RAMBOOT */
+
+ icache_enable ();
+
+ return (psize);
+}
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_flashstart = 0xff800000;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern ulong
+nand_probe (ulong physadr);
+
+void
+nand_init (void)
+{
+ ulong totlen = 0;
+
+ debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
+ totlen += nand_probe (CFG_NAND0_BASE);
+
+ printf ("%4lu MB\n", totlen >>20);
+}
+
+#endif /* CFG_CMD_NAND */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ common/environment.o(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
info->flash_id +=FLASH_28F256K3;
info->sector_count = 259;
info->size = 0x02000000;
- printf ("\Intel StrataFlash 28F256K3C device initialized\n");
+ debug ("Intel StrataFlash 28F256K3C device initialized\n");
break; /* => 32 MB */
case (FPW) (INTEL_ID_28F128J3A):
info->flash_id +=FLASH_28F128J3A;
info->sector_count = 259;
info->size = 0x02000000;
- printf ("\Micron StrataFlash MT28F128J3 device initialized\n");
+ debug ("Micron StrataFlash MT28F128J3 device initialized\n");
break; /* => 32 MB */
default:
id = READ_NAND(nand->IO_ADDR);
NAND_DISABLE_CE(nand); /* set pin high */
- /* No response - return failure */
- if (mfr == 0xff || mfr == 0) {
+
#ifdef NAND_DEBUG
- printf("NanD_Command (ReadID) got %d %d\n", mfr, id);
+ printf("NanD_Command (ReadID) got %x %x\n", mfr, id);
#endif
+ if (mfr == 0xff || mfr == 0) {
+ /* No response - return failure */
return 0;
}
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
+#define CONFIG_MPC8272_FAMILY 1
+#define CONFIG_IDS8247 1
+#define CPU_ID_STR "MPC8247"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw " \
+ "console=ttyS0,115200\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "bootfile=/tftpboot/IDS8247/uImage\0" \
+ "kernel_addr=ff800000\0" \
+ "ramdisk_addr=ffa00000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_MISC_INIT_R 1
+
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+
+#define I2C_PORT 0 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00000080)
+#define I2C_TRISTATE (iop->pdir &= ~0x00000080)
+#define I2C_READ ((iop->pdat & 0x00000080) != 0)
+#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000080; \
+ else iop->pdat &= ~0x00000080
+#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000100; \
+ else iop->pdat &= ~0x00000100
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+#if 0
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CONFIG_I2C_X
+#endif
+
+/*
+ * select serial console configuration
+ * use the extern UART for the console
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 14745600
+
+#define CFG_UART_BASE 0xE0000000
+#define CFG_UART_SIZE 0x10000
+
+#define CFG_NS16550_COM1 (CFG_UART_BASE + 0x8000)
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ *
+ */
+#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
+#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
+#undef CONFIG_ETHER_NONE /* define if ether on something else */
+#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE 0
+# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
+
+
+/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
+#define CONFIG_8260_CLKIN 66666666 /* in Hz */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_NFS | \
+ CFG_CMD_NAND | \
+ CFG_CMD_I2C | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
+ * The main FLASH is whichever is connected to *CS0.
+ */
+#define CFG_FLASH0_BASE 0xFFF00000
+#define CFG_FLASH0_SIZE 8
+
+/* Flash bank size (for preliminary settings)
+ */
+#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+/* Environment in flash */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x60000)
+#define CFG_ENV_SIZE 0x20000
+#define CFG_ENV_SECT_SIZE 0x20000
+
+/*-----------------------------------------------------------------------
+ * NAND-FLASH stuff
+ *-----------------------------------------------------------------------
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#define CFG_NAND0_BASE 0xE1000000
+
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define SECTORSIZE 512
+#define NAND_NO_RB
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define NAND_DISABLE_CE(nand) do \
+{ \
+ *(((volatile __u8 *)(nand->IO_ADDR)) + 0xc) = 0; \
+} while(0)
+
+#define NAND_ENABLE_CE(nand) do \
+{ \
+ *(((volatile __u8 *)(nand->IO_ADDR)) + 0x8) = 0; \
+} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) do \
+{ \
+ *(((volatile __u8 *)nandptr) + 0x8) = 0; \
+} while(0)
+
+#define NAND_CTL_SETALE(nandptr) do \
+{ \
+ *(((volatile __u8 *)nandptr) + 0x9) = 0; \
+} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) do \
+{ \
+ *(((volatile __u8 *)nandptr) + 0x8) = 0; \
+} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) do \
+{ \
+ *(((volatile __u8 *)nandptr) + 0xa) = 0; \
+} while(0)
+
+#ifdef NAND_NO_RB
+/* constant delay (see also tR in the datasheet) */
+#define NAND_WAIT_READY(nand) do { \
+ udelay(12); \
+} while (0)
+#else
+/* use the R/B pin */
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x2)) = (__u8)(d); } while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x1)) = (__u8)(d); } while(0)
+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x0)) = (__u8)d; } while(0)
+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr + 0x0)))
+
+#endif /* CFG_CMD_NAND */
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ *
+ * if you change bits in the HRCW, you must also change the CFG_*
+ * defines for the various registers affected by the HRCW e.g. changing
+ * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ */
+#define CFG_HRCW_MASTER (HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)
+
+/* no slaves so just fill with zeros */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xF0000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ *
+ * 60x SDRAM is mapped at CFG_SDRAM_BASE
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE CFG_FLASH0_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+
+#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
+#define CFG_HID0_FINAL 0
+#define CFG_HID2 0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR 0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR 0
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+ SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+ SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control 9-8
+ *-----------------------------------------------------------------------
+ * Ensure DFBRG is Divide by 16
+ */
+#define CFG_SCCR (0x00000028 | SCCR_DFBRG01)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 16 bit FLASH
+ * 1 60x GPCM 8 bit NAND
+ * 2 60x SDRAM 32 bit SDRAM
+ * 3 60x GPCM 8 bit UART
+ *
+ */
+
+#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
+
+/* Minimum mask to separate preliminary
+ * address ranges for CS[0:2]
+ */
+#define CFG_GLOBAL_SDRAM_LIMIT (32<<20) /* less than 32 MB */
+
+#define CFG_MPTPR 0x6600
+
+/*-----------------------------------------------------------------------------
+ * Address for Mode Register Set (MRS) command
+ *-----------------------------------------------------------------------------
+ */
+#define CFG_MRS_OFFS 0x00000110
+
+
+/* Bank 0 - FLASH
+ */
+#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\
+ ORxG_SCY_6_CLK )
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+/* Bank 1 - NAND Flash
+*/
+#define CFG_NAND_BASE CFG_NAND0_BASE
+#define CFG_NAND_SIZE 0x8000
+
+#define CFG_OR_TIMING_NAND 0x000036
+
+#define CFG_BR1_PRELIM ((CFG_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
+#define CFG_OR1_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | CFG_OR_TIMING_NAND )
+#endif
+
+/* Bank 2 - 60x bus SDRAM
+ */
+#define CFG_PSRT 0x20
+#define CFG_LSRT 0x20
+
+#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CFG_OR2_PRELIM CFG_OR2
+
+
+/* SDRAM initialization values
+*/
+#define CFG_OR2 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A10 |\
+ ORxS_NUMR_12)
+
+#define CFG_PSDMR (PSDMR_SDAM_A13_IS_A5 |\
+ PSDMR_BSMA_A15_A17 |\
+ PSDMR_SDA10_PBI0_A11 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_BL |\
+ PSDMR_LDOTOPRE_2C |\
+ PSDMR_WRC_3C |\
+ PSDMR_CL_3)
+
+/* Bank 3 - UART
+*/
+
+#define CFG_BR3_PRELIM ((CFG_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
+#define CFG_OR3_PRELIM (((-CFG_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )
+
+#endif /* __CONFIG_H */
#else
#define JFFS2_NUM_COMPR 7
#endif
-
+
/* Compatibility flags. */
#define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
#define JFFS2_NODE_ACCURATE 0x2000
projects / oweals / u-boot.git / commitdiff