boards: amlogic: add Khadas VIM3L support

Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]

diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 3b21f503677d41969daf6d61ce1e49b798815769..2ff90039ca218426467c273673402b4375af796b 100644 (file)
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -4,4 +4,5 @@ S:      Maintained
 L:     u-boot-amlogic@groups.io
 F:     board/amlogic/w400/
 F:     configs/khadas-vim3_defconfig
+F:     configs/khadas-vim3l_defconfig
 F:     configs/odroid-n2_defconfig

diff --git a/board/amlogic/w400/README.khadas-vim3l b/board/amlogic/w400/README.khadas-vim3l
new file mode 100644 (file)
index 0000000..0afff16
--- /dev/null
+++ b/board/amlogic/w400/README.khadas-vim3l
@@ -0,0 +1,132 @@
+U-Boot for Khadas VIM3L
+=======================
+
+Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion
+Technology Co., Ltd. with the following specifications:
+
+ - Amlogic S905D3 Arm Cortex-A55 quad-core SoC
+ - 2GB LPDDR4 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 40-pin GPIO header
+ - 1 x USB 3.0 Host, 1 x USB 2.0 Host
+ - eMMC, microSD
+ - M.2
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the U-Boot port supports the following devices:
+ - serial
+ - eMMC, microSD
+ - Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - ADC
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make khadas-vim3l_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ > DIR=vim3l-u-boot
+ > git clone --depth 1 \
+       https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
+       $DIR
+
+ > cd vim3l-u-boot
+ > make kvim3l_defconfig
+ > make
+ > export UBOOTDIR=$PWD
+
+ Go back to mainline U-Boot source tree then :
+ > mkdir fip
+
+ > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl2.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl30.bin fip/
+ > cp $UBOOTDIR/fip/g12a/bl31.img fip/
+ > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
+ > cp $UBOOTDIR/fip/g12a/piei.fw fip/
+ > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > sh fip/blx_fix.sh \
+       fip/bl30.bin \
+       fip/zero_tmp \
+       fip/bl30_zero.bin \
+       fip/bl301.bin \
+       fip/bl301_zero.bin \
+       fip/bl30_new.bin \
+       bl30
+
+ > sh fip/blx_fix.sh \
+       fip/bl2.bin \
+       fip/zero_tmp \
+       fip/bl2_zero.bin \
+       fip/acs.bin \
+       fip/bl21_zero.bin \
+       fip/bl2_new.bin \
+       bl2
+
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+                                       --output fip/bl30_new.bin.g12a.enc \
+                                       --level v3
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+                                       --output fip/bl30_new.bin.enc \
+                                       --level v3 --type bl30
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+                                       --output fip/bl31.img.enc \
+                                       --level v3 --type bl31
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+                                       --output fip/bl33.bin.enc \
+                                       --level v3 --type bl33 --compress lz4
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+                                       --output fip/bl2.n.bin.sig
+ > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
+               --output fip/u-boot.bin \
+               --bl2 fip/bl2.n.bin.sig \
+               --bl30 fip/bl30_new.bin.enc \
+               --bl31 fip/bl31.img.enc \
+               --bl33 fip/bl33.bin.enc \
+               --ddrfw1 fip/ddr4_1d.fw \
+               --ddrfw2 fip/ddr4_2d.fw \
+               --ddrfw3 fip/ddr3_1d.fw \
+               --ddrfw4 fip/piei.fw \
+               --ddrfw5 fip/lpddr4_1d.fw \
+               --ddrfw6 fip/lpddr4_2d.fw \
+               --ddrfw7 fip/diag_lpddr4.fw \
+               --ddrfw8 fip/aml_ddr.fw \
+               --ddrfw9 fip/lpddr3_1d.fw \
+               --level v3
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444

diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig
new file mode 100644 (file)
index 0000000..51e0f80
--- /dev/null
+++ b/configs/khadas-vim3l_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="w400"
+CONFIG_ARCH_MESON=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_MESON_G12A=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xff803000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_IDENT_STRING=" khadas-vim3l"
+CONFIG_DEBUG_UART=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MESON_G12A_USB_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_G12A=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MESON_EE_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_MESON_G12A=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
+CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_MESON=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_OF_LIBFDT_OVERLAY=y