luci-app-travelmate: sync with update 1.4.5

* see https://github.com/openwrt/packages/pull/8637 for reference

Signed-off-by: Dirk Brenken <dev@brenken.org>

diff --git a/applications/luci-app-travelmate/luasrc/model/cbi/travelmate/overview_tab.lua b/applications/luci-app-travelmate/luasrc/model/cbi/travelmate/overview_tab.lua
index 7fe5f23a4738eef6112af91f4c0f744efbdf9147..827a39b8cf3713c81884ab9b815c5943e93e7f8a 100644 (file)
--- a/applications/luci-app-travelmate/luasrc/model/cbi/travelmate/overview_tab.lua
+++ b/applications/luci-app-travelmate/luasrc/model/cbi/travelmate/overview_tab.lua
@@ -60,24 +60,30 @@ o2 = s:option(Flag, "trm_captive", translate("Captive Portal Detection"),
 o2.default = o2.enabled
 o2.rmempty = false
 
-o3 = s:option(Flag, "trm_proactive", translate("ProActive Uplink Switch"),
-       translate("Proactively scan and switch to a higher prioritized uplink, despite of an already existing connection."))
-o3.default = o3.enabled
+o3 = s:option(Flag, "trm_netcheck", translate("Net Error Check"),
+       translate("Treat missing internet availability as an error."))
+o3:depends("trm_captive", 1)
+o3.default = o3.disabled
 o3.rmempty = false
 
-o4 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
+o4 = s:option(Flag, "trm_proactive", translate("ProActive Uplink Switch"),
+       translate("Proactively scan and switch to a higher prioritized uplink, despite of an already existing connection."))
+o4.default = o4.enabled
+o4.rmempty = false
+
+o5 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
        translate("Name of the used uplink interface."))
 if dump then
        local i, v
        for i, v in ipairs(dump.interface) do
                if v.interface ~= "loopback" and v.interface ~= "lan" then
                        local device = v.l3_device or v.device or "-"
-                       o4:value(v.interface, v.interface.. " (" ..device.. ")")
+                       o5:value(v.interface, v.interface.. " (" ..device.. ")")
                end
        end
 end
-o4.default = trmiface
-o4.rmempty = false
+o5.default = trmiface
+o5.rmempty = false
 
 -- Runtime information
 
@@ -97,34 +103,40 @@ e2 = e:option(Value, "trm_radio", translate("Radio Selection / Order"),
        translate("Restrict travelmate to a single radio (e.g. 'radio1') or change the overall scanning order (e.g. 'radio1 radio2 radio0')."))
 e2.rmempty = true
 
-e3 = e:option(Value, "trm_triggerdelay", translate("Trigger Delay"),
-       translate("Additional trigger delay in seconds before travelmate processing begins."))
-e3.datatype = "range(1,60)"
-e3.default = 2
+e3 = e:option(Value, "trm_listexpiry", translate("List Auto Expiry"),
+       translate("Automatically resets the 'Faulty Stations' list after n minutes. Default is '0' which means no expiry."))
+e3.datatype = "range(0,300)"
+e3.default = 0
 e3.rmempty = false
 
-e4 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
-       translate("Retry limit to connect to an uplink."))
-e4.default = 3
-e4.datatype = "range(1,10)"
+e4 = e:option(Value, "trm_triggerdelay", translate("Trigger Delay"),
+       translate("Additional trigger delay in seconds before travelmate processing begins."))
+e4.datatype = "range(1,60)"
+e4.default = 2
 e4.rmempty = false
 
-e5 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
-       translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
-e5.default = 35
-e5.datatype = "range(20,80)"
+e5 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
+       translate("Retry limit to connect to an uplink."))
+e5.default = 5
+e5.datatype = "range(1,10)"
 e5.rmempty = false
 
-e6 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
-       translate("How long should travelmate wait for a successful wlan uplink connection."))
-e6.default = 30
-e6.datatype = "range(20,40)"
+e6 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
+       translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
+e6.default = 35
+e6.datatype = "range(20,80)"
 e6.rmempty = false
 
-e7 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
-       translate("Overall retry timeout in seconds."))
-e7.default = 60
-e7.datatype = "range(30,300)"
+e7 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
+       translate("How long should travelmate wait for a successful wlan uplink connection."))
+e7.default = 30
+e7.datatype = "range(20,40)"
 e7.rmempty = false
 
+e8 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
+       translate("Overall retry timeout in seconds."))
+e8.default = 60
+e8.datatype = "range(30,300)"
+e8.rmempty = false
+
 return m