spi: mxc_spi: Update pre and post divider algorithm
authorDirk Behme <dirk.behme@gmail.com>
Sat, 11 May 2013 05:25:54 +0000 (07:25 +0200)
committerStefano Babic <sbabic@denx.de>
Wed, 26 Jun 2013 14:23:30 +0000 (16:23 +0200)
The spi clock divisor is of the form x * (2**y),  or  x  << y, where x is
1 to 16, and y is 0 to 15. Note the similarity with floating point numbers.
Convert the desired divisor to the smallest number which is >= desired divisor,
and can be represented in this form. The previous algorithm chose a divisor
which could be almost twice as large as needed.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
drivers/spi/mxc_spi.c

index b553a9c5965a35a4c2d01409663428628979244a..0eca7767e0bf3e30015af4b536f836de8a0348c1 100644 (file)
@@ -128,8 +128,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
                unsigned int max_hz, unsigned int mode)
 {
        u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
-       s32 pre_div = 1, post_div = 0, i, reg_ctrl, reg_config;
-       u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
+       s32 reg_ctrl, reg_config;
+       u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, pre_div = 0, post_div = 0;
        struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
 
        if (max_hz == 0) {
@@ -147,26 +147,20 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
        reg_ctrl |=  MXC_CSPICTRL_EN;
        reg_write(&regs->ctrl, reg_ctrl);
 
-       /*
-        * The following computation is taken directly from Freescale's code.
-        */
        if (clk_src > max_hz) {
-               pre_div = DIV_ROUND_UP(clk_src, max_hz);
-               if (pre_div > 16) {
-                       post_div = pre_div / 16;
-                       pre_div = 16;
-               }
-               if (post_div != 0) {
-                       for (i = 0; i < 16; i++) {
-                               if ((1 << i) >= post_div)
-                                       break;
-                       }
-                       if (i == 16) {
+               pre_div = (clk_src - 1) / max_hz;
+               /* fls(1) = 1, fls(0x80000000) = 32, fls(16) = 5 */
+               post_div = fls(pre_div);
+               if (post_div > 4) {
+                       post_div -= 4;
+                       if (post_div >= 16) {
                                printf("Error: no divider for the freq: %d\n",
                                        max_hz);
                                return -1;
                        }
-                       post_div = i;
+                       pre_div >>= post_div;
+               } else {
+                       post_div = 0;
                }
        }
 
@@ -174,7 +168,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
        reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_SELCHAN(3)) |
                MXC_CSPICTRL_SELCHAN(cs);
        reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_PREDIV(0x0F)) |
-               MXC_CSPICTRL_PREDIV(pre_div - 1);
+               MXC_CSPICTRL_PREDIV(pre_div);
        reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) |
                MXC_CSPICTRL_POSTDIV(post_div);