imx8: Jump from alias to OCRAM address at SPL init

When running SPL on iMX8, the A core starts at address 0
which is a alias to OCRAM 0x100000.
The alias only map first 96KB of OCRAM, so this require the
SPL size can't beyond 96KB. But when using SPL DM, the size increase
significantly and may exceed 96KB.
So to fix the problem, we will change SPL linker address to OCRAM
address 0x100000. And then jump to the absolute address not the PC relative
address for entering OCRAM.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c5027c1338f6cdec12fd17e89643753b1285fe54..1df2aba3c2dade14b37e69eb1e9f2ef4950c9282 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -788,6 +788,7 @@ config ARCH_IMX8
        select ARM64
        select DM
        select OF_CONTROL
+       select ENABLE_ARM_SOC_BOOT0_HOOK
 
 config ARCH_IMX8M
        bool "NXP i.MX8M platform"

diff --git a/arch/arm/include/asm/arch-imx8/boot0.h b/arch/arm/include/asm/arch-imx8/boot0.h
new file mode 100644 (file)
index 0000000..5ce781a
--- /dev/null
+++ b/arch/arm/include/asm/arch-imx8/boot0.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#if defined(CONFIG_SPL_BUILD)
+       /*
+        * We use absolute address not PC relative address to jump.
+        * When running SPL on iMX8, the A core starts at address 0, a alias to OCRAM 0x100000,
+        * our linker address for SPL is from 0x100000. So using absolute address can jump to
+        * the OCRAM address from the alias.
+        * The alias only map first 96KB of OCRAM, so this require the SPL size can't beyond 96KB.
+        * But when using SPL DM, the size increase significantly and may exceed 96KB.
+        * That's why we have to jump to OCRAM.
+        */
+
+       ldr     x0, =reset
+       br      x0
+#else
+       b       reset
+#endif