bool "Support MPC837XEMDS"
select BOARD_EARLY_INIT_F
imply CMD_SATA
+ imply FSL_SATA
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
# Use DDR3 controller with DDR2 DIMMs on this board
select SYS_FSL_DDRC_GEN3
imply CMD_SATA
+ imply FSL_SATA
config TARGET_MPC8541CDS
bool "Support MPC8541CDS"
select SUPPORT_SPL
select SUPPORT_TPL
imply CMD_SATA
+ imply FSL_SATA
config TARGET_P1023RDB
bool "Support P1023RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select PHYS_64BIT
imply CMD_SATA
+ imply FSL_SATA
config TARGET_QEMU_PPCE500
bool "Support qemu-ppce500"
select PHYS_64BIT
imply CMD_EEPROM
imply CMD_SATA
+ imply FSL_SATA
config TARGET_T1023RDB
bool "Support T1023RDB"
imply CMD_SATA
imply CMD_PCI
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_P1011
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_P4080
bool
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_P5040
bool
select FSL_ELBC
imply CMD_SATA
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_QEMU_E500
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_T1042
bool
imply CMD_NAND
imply CMD_SATA
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_T2080
bool
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_T2081
bool
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
+ imply FSL_SATA
config ARCH_T4240
bool
imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
+ imply FSL_SATA
config BOOKE
bool
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=e0600000.flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=e0600000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
+CONFIG_FSL_SATA=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PHYLIB=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_FSL_SATA=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
+CONFIG_FSL_SATA=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
+CONFIG_FSL_SATA=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
Enable this driver to support Sata devices through
Synopsys DWC AHCI module.
+config FSL_SATA
+ bool "Enable Freescale SATA controller driver support"
+ help
+ Enable this driver to support the SATA controller found in
+ some Freescale PowerPC SoCs.
+
config SATA_MV
bool "Enable Marvell SATA controller driver support"
help
* SATA
*/
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
* SATA
*/
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
* SATA
*/
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
/* SATA */
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#endif /* CONFIG_TSEC_ENET */
/* SATA */
-#define CONFIG_FSL_SATA
#define CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
/* SATA */
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_FSL_SATA_V2
#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_FSL_SATA
#define CONFIG_LIBATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_FSL_SATA_V2
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_FSL_SATA_V2
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_FSL_SATA_V2
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_SATA1
*/
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
*/
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_LIBATA
#define CONFIG_LBA48
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SATA1
CONFIG_FSL_QIXIS
CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
CONFIG_FSL_QIXIS_V2
-CONFIG_FSL_SATA
CONFIG_FSL_SATA_V2
CONFIG_FSL_SDHC_V2_3
CONFIG_FSL_SDRAM_TYPE