--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6838.dtsi"
+
+/ {
+ model = "Broadcom bcm68380gerg";
+ compatible = "broadcom,bcm68380gerg", "brcm,bcm6838";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&memory {
+ force-size = <0x10000000>;
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+
+ led@0 {
+ reg = <0>;
+ active-low;
+ label = "bcm968380gerg:green:usb";
+ };
+};
choice
prompt "Board select"
+config BOARD_BROADCOM_BCM968380GERG
+ bool "Broadcom bcm968380gerg"
+ depends on SOC_BMIPS_BCM6838
+ select BMIPS_SUPPORTS_BOOT_RAM
+ help
+ Broadcom BCM968380GERG reference board with BCM68380 SoC with 512 MB
+ of RAM and 128 MB of flash (nand).
+ Between its different peripherals there's an integrated switch with 4
+ ethernet ports, 2 USB ports, 1 UART, GPIO buttons and LEDs, and
+ a BCM43217 (PCIe).
+
config BOARD_COMTREND_AR5315U
bool "Comtrend AR-5315u"
depends on SOC_BMIPS_BCM6318
config BMIPS_SUPPORTS_BOOT_RAM
bool
+source "board/broadcom/bcm968380gerg/Kconfig"
source "board/comtrend/ar5315u/Kconfig"
source "board/comtrend/ar5387un/Kconfig"
source "board/comtrend/ct5361/Kconfig"
--- /dev/null
+if BOARD_BROADCOM_BCM968380GERG
+
+config SYS_BOARD
+ default "bcm968380gerg"
+
+config SYS_VENDOR
+ default "broadcom"
+
+config SYS_CONFIG_NAME
+ default "broadcom_bcm968380gerg"
+
+endif
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += bcm968380gerg.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include <common.h>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include <common.h>
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ARCH_BMIPS=y
+CONFIG_SOC_BMIPS_BCM6838=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="brcm,bcm968380gerg"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="bcm968380gerg # "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_DM_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_BCM6328=y
+CONFIG_LED_BLINK=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_BCM6328_POWER_DOMAIN=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_BCM6345=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_LZO=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6838.h>
+
+#define CONFIG_ENV_SIZE (8 * 1024)