to 20MHz. It is useful since it reduces the amount of protocol code
required.
+config CMD_ONENAND
+ bool "onenand - access to onenand device"
+ help
+ OneNAND is a brand of NAND ('Not AND' gate) flash which provides
+ various useful features. This command allows reading, writing,
+ and erasing blocks. It allso provides a way to show and change
+ bad blocks, and test the device.
+
config CMD_PART
bool "part"
select PARTITION_UUIDS
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_FPGA is not set
CONFIG_SYS_PROMPT="SMDKC100 # "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_ONENAND=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
* Alphabetical list of all possible commands.
*/
-#define CONFIG_CMD_ONENAND /* OneNAND support */
#define CONFIG_CMD_PCI /* pciinfo */
#define CONFIG_CMD_PCMCIA /* PCMCIA support */
#define CONFIG_CMD_PORTIO /* Port I/O */
/* SD/MMC configuration */
#define CONFIG_MMC_DEFAULT_DEV 0
-#undef CONFIG_CMD_ONENAND
-
/* TIZEN THOR downloader support */
#define CONFIG_CMD_THOR_DOWNLOAD
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-#ifdef ONENAND_SUPPORT
-
-#define CONFIG_CMD_ONENAND /* ONENAND support */
-
-#endif
-
#define CONFIG_OMAP3_SPI
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
-#define CONFIG_CMD_ONENAND
-
#ifndef CONFIG_SPL_BUILD
/* Environment */
/* PWM */
#define CONFIG_PWM 1
-#define CONFIG_CMD_ONENAND
-
/* USB Composite download gadget - g_dnl */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
/***********************************************************
* Command definition
***********************************************************/
-#define CONFIG_CMD_ONENAND
-
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
#endif /* CONFIG_CMD_USB */
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_CMD_ONENAND
-#endif
-
/*
* BOOTP options
*/
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_ONENAND
CONFIG_CMD_PCA953X
CONFIG_CMD_PCA953X_INFO
CONFIG_CMD_PCI