ls102xa: pblimage: Add pblimage tool support for LS102xA
authorAlison Wang <b18965@freescale.com>
Wed, 3 Dec 2014 07:00:41 +0000 (15:00 +0800)
committerYork Sun <yorksun@freescale.com>
Thu, 11 Dec 2014 17:36:34 +0000 (09:36 -0800)
For LS102xA, the size of spl/u-boot-spl.bin is variable.
This patch adds the support to deal with the variable
u-boot size in pblimage tool. It will be padded to 64
byte boundary.

Use pblimage_check_params() to add the specific operations
for ARM, such as PBI CRC and END command and the calculation
of pbl_cmd_initaddr.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Makefile
tools/pblimage.c

index 2308828fb98c983453541ba660add7c91f1bd637..d3e99e5865fc1b656a8ae33f1489dffff9b810db 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -999,7 +999,8 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
 #concatenated with u-boot binary. It is need by PowerPC SoC having
 #internal SRAM <= 512KB.
 MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-               -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+               -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+               -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
 
 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
index 6e6e801314956a28fe3566d535412c2bb2b8a9b2..2a799ab4b64eb9214c1a38b317d782cd5fe1e0ea 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
@@ -8,6 +8,10 @@
 #include "pblimage.h"
 #include "pbl_crc32.h"
 
+#define roundup(x, y)          ((((x) + ((y) - 1)) / (y)) * (y))
+#define PBL_ACS_CONT_CMD       0x81000000
+#define PBL_ADDR_24BIT_MASK    0x00ffffff
+
 /*
  * Initialize to an invalid value.
  */
@@ -22,6 +26,13 @@ static int pbl_size;
 static char *fname = "Unknown";
 static int lineno = -1;
 static struct pbl_header pblimage_header;
+static int uboot_size;
+static int arch_flag;
+
+static uint32_t pbl_cmd_initaddr;
+static uint32_t pbi_crc_cmd1;
+static uint32_t pbi_crc_cmd2;
+static uint32_t pbl_end_cmd[4];
 
 static union
 {
@@ -38,20 +49,6 @@ static union
  * start offset by subtracting the size of the u-boot image from the
  * top of the allowable 24-bit range.
  */
-static void init_next_pbl_cmd(FILE *fp_uboot)
-{
-       struct stat st;
-       int fd = fileno(fp_uboot);
-
-       if (fstat(fd, &st) == -1) {
-               printf("Error: Could not determine u-boot image size. %s\n",
-                       strerror(errno));
-               exit(EXIT_FAILURE);
-       }
-
-       next_pbl_cmd = 0x82000000 - st.st_size;
-}
-
 static void generate_pbl_cmd(void)
 {
        uint32_t val = next_pbl_cmd;
@@ -66,11 +63,15 @@ static void generate_pbl_cmd(void)
 
 static void pbl_fget(size_t size, FILE *stream)
 {
-       unsigned char c;
+       unsigned char c = 0xff;
        int c_temp;
 
-       while (size && (c_temp = fgetc(stream)) != EOF) {
-               c = (unsigned char)c_temp;
+       while (size) {
+               c_temp = fgetc(stream);
+               if (c_temp != EOF)
+                       c = (unsigned char)c_temp;
+               else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
+                       c = 0xff;
                *pmem_buf++ = c;
                pbl_size++;
                size--;
@@ -80,8 +81,8 @@ static void pbl_fget(size_t size, FILE *stream)
 /* load split u-boot with PBI command 81xxxxxx. */
 static void load_uboot(FILE *fp_uboot)
 {
-       init_next_pbl_cmd(fp_uboot);
-       while (next_pbl_cmd < 0x82000000) {
+       next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
+       while (next_pbl_cmd < pbl_cmd_initaddr) {
                generate_pbl_cmd();
                pbl_fget(64, fp_uboot);
        }
@@ -154,8 +155,6 @@ static uint32_t reverse_byte(uint32_t val)
 /* write end command and crc command to memory. */
 static void add_end_cmd(void)
 {
-       uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
-               0x091380c0, 0x00000000};
        uint32_t crc32_pbl;
        int i;
        unsigned char *p = (unsigned char *)&pbl_end_cmd;
@@ -172,8 +171,8 @@ static void add_end_cmd(void)
 
        /* Add PBI CRC command. */
        *pmem_buf++ = 0x08;
-       *pmem_buf++ = 0x13;
-       *pmem_buf++ = 0x80;
+       *pmem_buf++ = pbi_crc_cmd1;
+       *pmem_buf++ = pbi_crc_cmd2;
        *pmem_buf++ = 0x40;
        pbl_size += 4;
 
@@ -184,17 +183,6 @@ static void add_end_cmd(void)
        *pmem_buf++ = (crc32_pbl >> 8) & 0xff;
        *pmem_buf++ = (crc32_pbl) & 0xff;
        pbl_size += 4;
-
-       if ((pbl_size % 16) != 0) {
-               for (i = 0; i < 8; i++) {
-                       *pmem_buf++ = 0x0;
-                       pbl_size++;
-               }
-       }
-       if ((pbl_size % 16 != 0)) {
-               printf("Error: Bad size of image file\n");
-               exit(EXIT_FAILURE);
-       }
 }
 
 void pbl_load_uboot(int ifd, struct image_tool_params *params)
@@ -268,12 +256,64 @@ static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
        /*nothing need to do, pbl_load_uboot takes care of whole file. */
 }
 
+int pblimage_check_params(struct image_tool_params *params)
+{
+       FILE *fp_uboot;
+       int fd;
+       struct stat st;
+
+       if (!params)
+               return EXIT_FAILURE;
+
+       fp_uboot = fopen(params->datafile, "r");
+       if (fp_uboot == NULL) {
+               printf("Error: %s open failed\n", params->datafile);
+               exit(EXIT_FAILURE);
+       }
+       fd = fileno(fp_uboot);
+
+       if (fstat(fd, &st) == -1) {
+               printf("Error: Could not determine u-boot image size. %s\n",
+                      strerror(errno));
+               exit(EXIT_FAILURE);
+       }
+
+       /* For the variable size, we need to pad it to 64 byte boundary */
+       uboot_size = roundup(st.st_size, 64);
+
+       if (params->arch == IH_ARCH_ARM) {
+               arch_flag = IH_ARCH_ARM;
+               pbi_crc_cmd1 = 0x61;
+               pbi_crc_cmd2 = 0;
+               pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
+               pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
+               pbl_cmd_initaddr |= uboot_size;
+               pbl_end_cmd[0] = 0x09610000;
+               pbl_end_cmd[1] = 0x00000000;
+               pbl_end_cmd[2] = 0x096100c0;
+               pbl_end_cmd[3] = 0x00000000;
+       } else if (params->arch == IH_ARCH_PPC) {
+               arch_flag = IH_ARCH_PPC;
+               pbi_crc_cmd1 = 0x13;
+               pbi_crc_cmd2 = 0x80;
+               pbl_cmd_initaddr = 0x82000000;
+               pbl_end_cmd[0] = 0x09138000;
+               pbl_end_cmd[1] = 0x00000000;
+               pbl_end_cmd[2] = 0x091380c0;
+               pbl_end_cmd[3] = 0x00000000;
+       }
+
+       next_pbl_cmd = pbl_cmd_initaddr;
+       return 0;
+};
+
 /* pblimage parameters */
 static struct image_type_params pblimage_params = {
        .name           = "Freescale PBL Boot Image support",
        .header_size    = sizeof(struct pbl_header),
        .hdr            = (void *)&pblimage_header,
        .check_image_type = pblimage_check_image_types,
+       .check_params   = pblimage_check_params,
        .verify_header  = pblimage_verify_header,
        .print_header   = pblimage_print_header,
        .set_header     = pblimage_set_header,