usb: ulpi: Add omap-ulpi-view port support
authorGovindraj.R <govindraj.raja@ti.com>
Mon, 6 Feb 2012 03:55:32 +0000 (03:55 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sun, 12 Feb 2012 09:11:30 +0000 (10:11 +0100)
Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.

Currently ehci ports are available on omap3/4 platforms so enable the same
for beagle and panda, patch is tested on the same boards.

Thanks to Igor Grinberg <grinberg@compulab.co.il> for reviewing the
omap-ehci patches and suggesting this approach.

[1]: http://www.mail-archive.com/u-boot@lists.denx.de/msg76076.html

Tested-by: Stefano Babic <sbabic@denx.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
doc/README.omap-ulpi-viewport [new file with mode: 0644]
drivers/usb/ulpi/Makefile
drivers/usb/ulpi/omap-ulpi-viewport.c [new file with mode: 0644]
include/configs/omap3_beagle.h
include/configs/omap4_panda.h

diff --git a/doc/README.omap-ulpi-viewport b/doc/README.omap-ulpi-viewport
new file mode 100644 (file)
index 0000000..a5240b9
--- /dev/null
@@ -0,0 +1,27 @@
+Reference code ""drivers/usb/ulpi/omap-ulpi-viewport.c"
+
+Contains the ulpi read write api's to perform
+any ulpi phy port access on omap platform.
+
+On omap ehci reg map contains INSNREG05_ULPI
+register which offers the ulpi phy access so
+any ulpi phy commands should be passsed using this
+register.
+
+omap-ulpi-viewport.c is a low level function
+implementation of "drivers/usb/ulpi/ulpi.c"
+
+To enable and use omap-ulpi-viewport.c
+we require CONFIG_USB_ULPI_VIEWPORT_OMAP and
+CONFIG_USB_ULPI be enabled in config file.
+
+Any ulpi ops request can be done with ulpi.c
+and soc specific binding and usage is done with
+omap-ulpi-viewport implementation.
+
+Ex: scenario:
+omap-ehci driver code requests for ulpi phy reset if
+ehci is used in phy mode, which will call ulpi phy reset
+the ulpi phy reset does ulpi_read/write from viewport
+implementation which will do ulpi reset using the
+INSNREG05_ULPI register.
index d43b2293e1f0badb0db008a25017b53df253b823..281eb1c5c12cb8876935e31e28c2e1c7d5ee673e 100644 (file)
@@ -24,6 +24,7 @@ LIB   := $(obj)libusb_ulpi.o
 
 COBJS-$(CONFIG_USB_ULPI)               += ulpi.o
 COBJS-$(CONFIG_USB_ULPI_VIEWPORT)      += ulpi-viewport.o
+COBJS-$(CONFIG_USB_ULPI_VIEWPORT_OMAP) += omap-ulpi-viewport.o
 
 COBJS  := $(COBJS-y)
 SRCS   := $(COBJS:.o=.c)
diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c b/drivers/usb/ulpi/omap-ulpi-viewport.c
new file mode 100644 (file)
index 0000000..3c1ea1a
--- /dev/null
@@ -0,0 +1,105 @@
+/*
+ * OMAP ulpi viewport support
+ * Based on drivers/usb/ulpi/ulpi-viewport.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb/ulpi.h>
+
+#define OMAP_ULPI_WR_OPSEL     (3 << 21)
+#define OMAP_ULPI_ACCESS       (1 << 31)
+
+/*
+ * Wait for the ULPI Access to complete
+ */
+static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
+{
+       int timeout = CONFIG_USB_ULPI_TIMEOUT;
+
+       while (--timeout) {
+               if ((readl(ulpi_vp->viewport_addr) & mask))
+                       return 0;
+
+               udelay(1);
+       }
+
+       return ULPI_ERROR;
+}
+
+/*
+ * Wake the ULPI PHY up for communication
+ *
+ * returns 0 on success.
+ */
+static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
+{
+       int err;
+
+       if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS)
+               return 0; /* already awake */
+
+       writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr);
+
+       err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
+       if (err)
+               debug("ULPI wakeup timed out\n");
+
+       return err;
+}
+
+/*
+ * Issue a ULPI read/write request
+ */
+static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
+{
+       int err;
+
+       err = ulpi_wakeup(ulpi_vp);
+       if (err)
+               return err;
+
+       writel(value, ulpi_vp->viewport_addr);
+
+       err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
+       if (err)
+               debug("ULPI request timed out\n");
+
+       return err;
+}
+
+int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
+{
+       u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
+                       OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff);
+
+       return ulpi_request(ulpi_vp, val);
+}
+
+u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
+{
+       int err;
+       u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
+                        OMAP_ULPI_WR_OPSEL | ((u32)reg << 16);
+
+       err = ulpi_request(ulpi_vp, val);
+       if (err)
+               return err;
+
+       return readl(ulpi_vp->viewport_addr) & 0xff;
+}
index 4c7a686d390b713be73d930b51f34c93dac0581b..45c8ded6c905e1aead9ccecd99e37bcf9ab35fc6 100644 (file)
 /* USB EHCI */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
+
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
index e9ef2a3782b159b30bdf7f77e93b7dcbefc1ef84..416eb390570622d0170f5f7c84862d342bfd2e76 100644 (file)
@@ -33,6 +33,9 @@
  */
 #define CONFIG_PANDA           1       /* working with Panda */
 
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+
 #include <configs/omap4_common.h>
 
 /* GPIO */