+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ATA_SFF is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_AVERAGE=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_CALGARY_IOMMU=y
-CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC_T10DIF=y
-# CONFIG_CRYPTO_AES_X86_64 is not set
-# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
-# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
-CONFIG_CRYPTO_CRCT10DIF=y
-# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
-# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
-# CONFIG_CRYPTO_SALSA20_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
-# CONFIG_CRYPTO_SHA1_MB is not set
-# CONFIG_CRYPTO_SHA1_SSSE3 is not set
-# CONFIG_CRYPTO_SHA256_SSSE3 is not set
-# CONFIG_CRYPTO_SHA512_SSSE3 is not set
-# CONFIG_CRYPTO_SKEIN is not set
-# CONFIG_CRYPTO_THREEFISH is not set
-# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
-CONFIG_DIRECT_GBPAGES=y
-# CONFIG_EFI is not set
-CONFIG_FB=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_VESA is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_GART_IOMMU=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_SOFT_DIRTY=y
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_FENTRY=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HID=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HW_RANDOM_INTEL=y
-# CONFIG_HW_RANDOM_VIRTIO is not set
-CONFIG_HYPERVISOR_GUEST=y
-# CONFIG_I7300_IDLE is not set
-# CONFIG_IA32_EMULATION is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_MIC_BUS is not set
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_IOMMU_HELPER=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_ITCO_VENDOR_SUPPORT is not set
-CONFIG_ITCO_WDT=y
-# CONFIG_KVM_DEBUG_FS is not set
-CONFIG_KVM_GUEST=y
-CONFIG_LPC_ICH=y
-# CONFIG_MAXSMP is not set
-CONFIG_MEMORY_BALLOON=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_MFD_CORE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPSC is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=8
-# CONFIG_NUMA is not set
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-# CONFIG_PARAVIRT_SPINLOCKS is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCI_IOAPIC is not set
-CONFIG_PCI_LABEL=y
-# CONFIG_PCI_MMCONFIG is not set
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_QUEUE_RWLOCK=y
-CONFIG_RAS=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SLUB_CPU_PARTIAL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-# CONFIG_SPARSEMEM_VMEMMAP is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_TREE_RCU=y
-# CONFIG_UNISYSSPAR is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_VMWARE_BALLOON=y
-CONFIG_VMWARE_PVSCSI=y
-CONFIG_VMWARE_VMCI=y
-CONFIG_VMWARE_VMCI_VSOCKETS=y
-CONFIG_VMXNET3=y
-CONFIG_VSOCKETS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_X86_64=y
-CONFIG_X86_64_SMP=y
-# CONFIG_X86_ACPI_CPUFREQ is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_DEV_DMA_OPS=y
-CONFIG_X86_HT=y
-# CONFIG_X86_INTEL_LPSS is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-CONFIG_X86_TSC=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-ARCH:=x86_64
-BOARDNAME:=x86_64
-DEFAULT_PACKAGES += kmod-acpi-button kmod-button-hotplug kmod-e1000e kmod-e1000 kmod-r8169
-ARCH_PACKAGES:=x86_64
-MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-
-define Target/Description
- Build images for 64 bit systems including virtualized guests.
-endef
+++ /dev/null
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=i386
-BOARD:=x86
-BOARDNAME:=x86
-FEATURES:=squashfs ext4 vdi vmdk pcmcia targz
-SUBTARGETS=generic xen_domu ep80579 geode kvm_guest rdc 64
-MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-
-KERNEL_PATCHVER:=3.18
-
-KERNELNAME:=bzImage
-
-include $(INCLUDE_DIR)/target.mk
-
-$(eval $(call BuildTarget))
-
-$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \
- Please install mkisofs. \
-))
+++ /dev/null
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth0
- option type bridge
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
- option ip6assign 60
-
-config interface wan
- option ifname eth1
- option proto dhcp
-
-config interface wan6
- option ifname eth1
- option proto dhcpv6
-
-config globals globals
- option ula_prefix auto
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyS0::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_procfs() {
- mount -o noatime -t proc none /proc
-}
-
+++ /dev/null
-check_for_iso() {
- grep -qE '/dev/root.*iso9660' /proc/mounts && ramoverlay
-}
-
-boot_hook_add preinit_mount_root check_for_iso
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2012-2015 OpenWrt.org
-
-move_config() {
- . /lib/upgrade/platform.sh
-
- if platform_export_bootpart; then
- mount -t ext4 -o rw,noatime "$BOOTPART" /mnt
- mv -f /mnt/sysupgrade.tgz /
- umount /mnt
- fi
-}
-
-boot_hook_add preinit_mount_root move_config
-
+++ /dev/null
-platform_export_bootpart() {
- local cmdline uuid disk
-
- if read cmdline < /proc/cmdline; then
- case "$cmdline" in
- *block2mtd=*)
- disk="${cmdline##*block2mtd=}"
- disk="${disk%%,*}"
- ;;
- *root=*)
- disk="${cmdline##*root=}"
- disk="${disk%% *}"
- ;;
- esac
-
- case "$disk" in
- PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02)
- uuid="${disk#PARTUUID=}"
- uuid="${uuid%-02}"
- for disk in /dev/[hsv]d[a-z]; do
- set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "')
- if [ "$4$3$2$1" = "$uuid" ]; then
- export BOOTPART="${disk}1"
- return 0
- fi
- done
- ;;
- /dev/*)
- export BOOTPART="${disk%[0-9]}1"
- return 0
- ;;
- esac
- fi
-
- return 1
-}
-
-platform_check_image() {
- [ "$#" -gt 1 ] && return 1
-
- case "$(get_magic_word "$1")" in
- eb48|eb63) return 0;;
- *)
- echo "Invalid image type"
- return 1
- ;;
- esac
-}
-
-platform_copy_config() {
- if [ -b "$BOOTPART" ]; then
- mount -t ext4 -o rw,noatime "$BOOTPART" /mnt
- cp -af "$CONF_TAR" /mnt/
- umount /mnt
- fi
-}
-
-platform_do_upgrade() {
- platform_export_bootpart
-
- if [ -b "${BOOTPART%[0-9]}" ]; then
- sync
- get_image "$@" | dd of="${BOOTPART%[0-9]}" bs=4096 conv=fsync
- sleep 1
- fi
-}
+++ /dev/null
-# CONFIG_60XX_WDT is not set
-# CONFIG_64BIT is not set
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIX is not set
-CONFIG_AMD_NB=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUE_RWLOCK=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_PIIX=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BOUNCE=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMPAT_VDSO=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPU5_WDT is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
-# CONFIG_CX_ECAT is not set
-CONFIG_DCACHE_WORD_ACCESS=y
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DELL_RBU is not set
-# CONFIG_DMI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_EDD is not set
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT4_FS=y
-# CONFIG_F71808E_WDT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCSPKR_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HP_WATCHDOG is not set
-CONFIG_HT_IRQ=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
-# CONFIG_HYPERVISOR_GUEST is not set
-CONFIG_HZ_PERIODIC=y
-CONFIG_I8253_LOCK=y
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_RTL is not set
-# CONFIG_IE6XX_WDT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INSTRUCTION_DECODER=y
-# CONFIG_INTEL_POWERCLAMP is not set
-# CONFIG_IOMMU_STRESS is not set
-# CONFIG_IOSF_MBI is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-# CONFIG_IO_DELAY_UDELAY is not set
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_ITCO_WDT is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_MATOM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MELAN is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_MICROCODE_AMD_EARLY is not set
-# CONFIG_MICROCODE_INTEL_EARLY is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-CONFIG_NAMESPACES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET5501 is not set
-# CONFIG_NET_NS is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=1
-# CONFIG_NSC_GPIO is not set
-# CONFIG_NTB is not set
-CONFIG_NVRAM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OLPC is not set
-CONFIG_OPROFILE_NMI_TIMER=y
-# CONFIG_OPTIMIZE_INLINING is not set
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_MSI=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_EVENTS_INTEL_UNCORE=y
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_PMC_ATOM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-# CONFIG_RELOCATABLE is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TELCLOCK is not set
-CONFIG_THERMAL=y
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-CONFIG_THERMAL_GOV_STEP_WISE=y
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-# CONFIG_TOSHIBA is not set
-CONFIG_UID16=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VIA_WDT is not set
-CONFIG_VM86=y
-# CONFIG_VMWARE_VMCI is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-# CONFIG_X86_16BIT is not set
-CONFIG_X86_32=y
-# CONFIG_X86_32_IRIS is not set
-CONFIG_X86_32_LAZY_GS=y
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_ANCIENT_MCE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_F00F_BUG=y
-CONFIG_X86_FEATURE_NAMES=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GX_SUSPMOD is not set
-# CONFIG_X86_INTEL_PSTATE is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_INVD_BUG=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGRUN is not set
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_AMD=y
-# CONFIG_X86_MCE_INJECT is not set
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_MPPARSE=y
-CONFIG_X86_MSR=y
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_PAE is not set
-CONFIG_X86_PAT=y
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-CONFIG_X86_PPRO_FENCE=y
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_RESERVE_LOW=64
-# CONFIG_X86_SMAP is not set
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_APIC_MSI=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_INFLATE=y
-# CONFIG_ZONE_DMA32 is not set
+++ /dev/null
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHPTE is not set
-# CONFIG_ITCO_VENDOR_SUPPORT is not set
-CONFIG_ITCO_WDT=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_MTD is not set
-# CONFIG_NOHIGHMEM is not set
-CONFIG_SATA_AHCI=y
-# CONFIG_SQUASHFS is not set
+++ /dev/null
-BOARDNAME:=Intel EP80579
-KERNEL_PATCHVER:=3.3
-DEFAULT_PACKAGES += kmod-ep80579-can kmod-ep80579-eth kmod-ep80579-misc \
- kmod-usb-core kmod-usb2 kmod-usb-hid kmod-usb-uhci
-FEATURES += broken
-
-define Target/Description
- Build firmware images for Intel EP80579 based boards
- (e.g : ADI Engineering Ocracoke Island)
-endef
-
+++ /dev/null
-# CONFIG_3C515 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_I2C_OPREGION is not set
-# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_APPLE_GMUX is not set
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_SAHARA is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_DELL_SMO8800 is not set
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMI=y
-# CONFIG_DMIID is not set
-CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
-# CONFIG_DMI_SYSFS is not set
-CONFIG_DRM=y
-# CONFIG_DRM_AST is not set
-CONFIG_DRM_BOCHS=y
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I810 is not set
-CONFIG_DRM_I915=y
-CONFIG_DRM_I915_FBDEV=y
-CONFIG_DRM_I915_KMS=y
-# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_PTN3460 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_TTM=y
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_EFI is not set
-# CONFIG_EISA is not set
-# CONFIG_EL3 is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_VESA is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_GEOS is not set
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INT340X_THERMAL is not set
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_INTERVAL_TREE=y
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_LANCE is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_MDA_CONSOLE is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-# CONFIG_PANASONIC_LAPTOP is not set
-CONFIG_PATA_AMD=y
-CONFIG_PATA_LEGACY=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_VIA=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_IOAPIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_RAS=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-# CONFIG_TOSHIBA_HAPS is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-# CONFIG_WDT is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-# CONFIG_X86_E_POWERSAVER is not set
-# CONFIG_X86_INTEL_LPSS is not set
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
+++ /dev/null
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Generic
- NAME:=Generic
- PACKAGES:=kmod-3c59x kmod-e100 kmod-e1000 kmod-natsemi kmod-ne2k-pci \
- kmod-pcnet32 kmod-8139too kmod-r8169 kmod-sis900 kmod-tg3 \
- kmod-via-rhine kmod-via-velocity
-endef
-
-define Profile/Generic/Description
- Generic Profile
-endef
-$(eval $(call Profile,Generic))
+++ /dev/null
-BOARDNAME:=Generic
-
-define Target/Description
- Build firmware images for x86 based boards
- (e.g : Soekris, ...)
-endef
-
+++ /dev/null
-# CONFIG_3C515 is not set
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_8129=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_ALIX=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-# CONFIG_EISA is not set
-# CONFIG_EL3 is not set
-CONFIG_GEODE_WDT=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_CS5535=y
-CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_INTEL_MID is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HWMON=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCA=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_ISA=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_LANCE is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_M486 is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_CS5535=y
-CONFIG_MGEODEGX1=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_NATSEMI=y
-CONFIG_NET5501=y
-CONFIG_NLS=y
-CONFIG_NSC_GPIO=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5535=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_SC1200=y
-CONFIG_PC8736x_GPIO=y
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_PNP is not set
-CONFIG_SC1200_WDT=y
-CONFIG_SCx200_ACB=y
-CONFIG_SCx200_WDT=y
-CONFIG_SENSORS_LM90=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIA_RHINE=y
-CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_WDT is not set
-CONFIG_X86_CPUID=y
-CONFIG_X86_DEBUGCTLMSR=y
-# CONFIG_X86_MCE is not set
-CONFIG_X86_REBOOTFIXUPS=y
-CONFIG_X86_TSC=y
+++ /dev/null
-BOARDNAME:=AMD Geode based systems
-FEATURES:=squashfs ext4 pci usb gpio
-DEFAULT_PACKAGES += \
- kmod-crypto-hw-geode kmod-crypto-ocf kmod-crypto-cbc \
- kmod-ath5k kmod-ath9k \
- kmod-button-hotplug \
- kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
- kmod-ledtrig-netdev hwclock wpad-mini
-
-CPU_TYPE := geode
-
-define Target/Description
- Build firmware images for AMD Geode GX/LX based systems (net5501, alix, geos)
-endef
+++ /dev/null
-config X86_ETHERBOOT_IMAGES
- bool "Build Etherboot image"
- depends on TARGET_x86_thincan_DBE61
- default y
- help
- Builds network bootable image for ThinCan DBE61 (Etherboot BIOS)
-
-config X86_ETHERBOOT_BOOTOPTS
- string "Extra kernel boot options"
- depends on X86_ETHERBOOT_IMAGES
- default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS
- default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61"
- help
- Kernel arguments to pass to the kernel eg. NFS root location etc.
+++ /dev/null
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-export PATH=$(TARGET_PATH):/sbin
-
-GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
-GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
-GRUB_TERMINALS =
-GRUB_SERIAL_CONFIG =
-GRUB_TERMINAL_CONFIG =
-GRUB_CONSOLE_CMDLINE =
-
-USE_ATKBD = generic kvm_guest
-
-ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)))),)
- GRUB2_MODULES += at_keyboard
- GRUB2_MODULES_ISO += at_keyboard
-endif
-
-ifneq ($(CONFIG_GRUB_CONSOLE),)
- GRUB_CONSOLE_CMDLINE += console=tty0
- GRUB_TERMINALS += console
-endif
-
-GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
-
-ifneq ($(GRUB_SERIAL),)
- GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8
- GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=off
- GRUB_TERMINALS += serial
-endif
-
-ifneq ($(GRUB_TERMINALS),)
- GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
-endif
-
-SIGNATURE:=$(shell dd if=/dev/urandom bs=4 count=1 2>/dev/null | hexdump -v -e '"%08x"')
-ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(SIGNATURE)-02)
-
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
-
-ifneq ($(CONFIG_GRUB_IMAGES),)
-
- BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
-
- define Image/cmdline/ext4
- root=$(ROOTPART) rootfstype=ext4 rootwait
- endef
-
- define Image/cmdline/jffs2-64k
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
- endef
-
- define Image/cmdline/jffs2-128k
- block2mtd.block2mtd=$(ROOTPART),131072,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
- endef
-
- define Image/cmdline/squashfs
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=squashfs rootwait
- endef
-
- define Image/Build/grub2
- # left here because the image builder doesnt need these
- $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
- $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
- grub-mkimage \
- -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
- -o $(KDIR)/grub2/core.img \
- -O i386-pc \
- -c ./grub-early.cfg \
- $(GRUB2_MODULES)
- $(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
- echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
- sed \
- -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
- -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
- -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
- ./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
- PADDING="$(CONFIG_TARGET_IMAGES_PAD)" SIGNATURE="$(SIGNATURE)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
- 256
- grub-bios-setup \
- --device-map="$(KDIR)/grub2/device.map" \
- -d "$(KDIR)/grub2" \
- -r "hd0,msdos1" \
- "$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
- $(call Image/Build/grub/$(1))
- endef
-endif
-
-ROOTDELAY=10
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/Build/iso
- $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
- $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
- grub-mkimage \
- -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
- -o $(KDIR)/grub2/eltorito.img \
- -O i386-pc \
- -c ./grub-early.cfg \
- $(GRUB2_MODULES_ISO)
- cat \
- $(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \
- $(KDIR)/grub2/eltorito.img \
- > $(KDIR)/root.grub/boot/grub/eltorito.img
- sed \
- -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
- -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
- -e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
- -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
- ./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
- $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
- mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \
- -o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
-endef
-
-ifneq ($(CONFIG_VDI_IMAGES),)
- define Image/Build/vdi
- rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
- qemu-img convert -f raw -O vdi \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
- # XXX: VBoxManage insists on setting perms to 0600
- chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
- endef
-endif
-
-ifneq ($(CONFIG_VMDK_IMAGES),)
- define Image/Build/vmdk
- rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
- qemu-img convert -f raw -O vmdk \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
- $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
- endef
-endif
-
-define Image/Build/gzip
- gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
- gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
-endef
-
-ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
- define Image/Build/gzip/ext4
- $(call Image/Build/gzip,ext4)
- endef
- ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
- define Image/Build/gzip/squashfs
- $(call Image/Build/gzip,squashfs)
- endef
- define Image/Build/gzip/jffs2-64k
- $(call Image/Build/gzip,jffs2-64k)
- endef
- define Image/Build/gzip/jffs2-128k
- $(call Image/Build/gzip,jffs2-128k)
- endef
- endif
-endif
-
-define Image/BuildKernel
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
- ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
- rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
- $(STAGING_DIR_HOST)/bin/mkelfImage \
- --append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
- $(KDIR)/bzImage \
- $(BIN_DIR)/$(IMG_PREFIX)-etherboot
- endif
-endef
-
-define Image/Build/Profile/ar525w
- cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
- $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32
- $(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
- $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img
- $(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
- $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img
-endef
-
-define Image/Build/Profile/sitecom
- cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
- #32k config data + 20 bytes header + 2 bytes checksum after kernel image
- $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790
- $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img
- cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
- cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img
- rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp
-endef
-
-define Image/Build/Profile/bifferboard
- $(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \
- $(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img
-endef
-
-define Image/Prepare
- $(call Image/Prepare/grub2)
-endef
-
-define Image/Build/Initramfs
- $(CP) $(KDIR)/bzImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage
-endef
-
-define Image/Build
- $(call Image/Build/$(1))
- ifneq ($(1),iso)
- $(call Image/Build/grub2,$(1))
- $(call Image/Build/vdi,$(1))
- $(call Image/Build/vmdk,$(1))
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
- else
- $(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso
- endif
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
- $(call Image/Build/gzip/$(1))
- $(call Image/Build/Profile/$(PROFILE),$(1))
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- $(call Image/Build/Initramfs)
-endif
-endef
-
-$(eval $(call BuildImage))
+++ /dev/null
-#!/usr/bin/env bash
-# Copyright (C) 2006-2012 OpenWrt.org
-set -x
-[ $# == 5 -o $# == 6 ] || {
- echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image> [<align>]"
- exit 1
-}
-
-OUTPUT="$1"
-KERNELSIZE="$2"
-KERNELDIR="$3"
-ROOTFSSIZE="$4"
-ROOTFSIMAGE="$5"
-ALIGN="$6"
-
-rm -f "$OUTPUT"
-
-head=16
-sect=63
-cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512)))
-
-# create partition table
-set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m ${ALIGN:+-l $ALIGN} ${SIGNATURE:+-S 0x$SIGNATURE}`
-
-KERNELOFFSET="$(($1 / 512))"
-KERNELSIZE="$2"
-ROOTFSOFFSET="$(($3 / 512))"
-ROOTFSSIZE="$(($4 / 512))"
-
-[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE"
-dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc
-
-[ -n "$NOGRUB" ] && exit 0
-
-make_ext4fs -J -l "$KERNELSIZE" "$OUTPUT.kernel" "$KERNELDIR"
-dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc
-rm -f "$OUTPUT.kernel"
+++ /dev/null
-configfile (hd0,msdos1)/boot/grub/grub.cfg
+++ /dev/null
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-set root='(cd)'
-
-menuentry "libreCMC" {
- linux /boot/vmlinuz @CMDLINE@ noinitrd
-}
+++ /dev/null
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-set root='(hd0,msdos1)'
-
-menuentry "libreCMC" {
- linux /boot/vmlinuz @CMDLINE@ noinitrd
-}
-menuentry "libreCMC (failsafe)" {
- linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd
-}
+++ /dev/null
-#!/usr/bin/env python
-
-"""
- Create firmware for 4/8MB Bifferboards, suitable for uploading using
- either bb_upload8.py or bb_eth_upload8.py
-"""
-
-import struct, sys
-
-# Increase the kmax value if the script gives errors about the kernel being
-# too large. You need to set the Biffboot kmax value to the same value you
-# use here.
-kmax = 0x10
-
-# No need to change this for 4MB devices, it's only used to tell you if
-# the firmware is too large!
-flash_size = 0x800000
-
-# This is always the same, for 1MB, 4MB and 8MB devices
-config_extent = 0x6000
-
-kernel_extent = kmax * 0x10000
-
-if __name__ == "__main__":
-
- if len(sys.argv) != 4:
- print "usage: mkimg_bifferboard.py <kernel> <rootfs> <output file>"
- sys.exit(-1)
-
- bzimage = sys.argv[1]
- rootfs = sys.argv[2]
- target = sys.argv[3]
-
- # Kernel first
- fw = file(bzimage).read()
- if len(fw) > (kernel_extent - config_extent):
- raise IOError("Kernel too large")
-
- # Pad up to end of kernel partition
- while len(fw) < (kernel_extent - config_extent):
- fw += "\xff"
-
- fw += file(rootfs).read()
-
- # Check length of total
- if len(fw) > (flash_size - 0x10000 - config_extent):
- raise IOError("Rootfs too large")
-
- file(target,"wb").write(fw)
- print "Firmware written to '%s'" % target
+++ /dev/null
-#!/usr/bin/perl
-
-open (bzimg, @ARGV[0]);
-while (<bzimg>) { $i .= $_; }
-$i .= pack "v", -(unpack "%v*", $i);
-print "CSYS";
-print pack("V", length($i));
-print pack("V", 0);
-print "WRRM";
-print pack("V", length($i));
-print $i;
+++ /dev/null
-CONFIG_ACPI=y
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_BATTERY is not set
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_SBS is not set
-# CONFIG_ACPI_THERMAL is not set
-# CONFIG_ACPI_WMI is not set
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-# CONFIG_ASUS_LAPTOP is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EFI is not set
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HPET is not set
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-# CONFIG_HW_RANDOM_VIRTIO is not set
-CONFIG_HYPERVISOR_GUEST=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_KVM is not set
-# CONFIG_KVM_DEBUG_FS is not set
-CONFIG_KVM_GUEST=y
-# CONFIG_LGUEST is not set
-# CONFIG_LGUEST_GUEST is not set
-CONFIG_NO_HZ=y
-# CONFIG_M486 is not set
-CONFIG_MPENTIUM4=y
-CONFIG_NR_CPUS=4
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-CONFIG_PARAVIRT_TIME_ACCOUNTING=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_IOAPIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_RAS=y
-# CONFIG_SAMSUNG_Q10 is not set
-# CONFIG_SCSI_VIRTIO is not set
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SLUB_CPU_PARTIAL=y
-CONFIG_SMP=y
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-# CONFIG_VHOST_NET is not set
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_VIRTIO_NET is not set
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_VMWARE_BALLOON is not set
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_X86_32_SMP=y
-# CONFIG_X86_ACPI_CPUFREQ is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_E_POWERSAVER is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_HT=y
-# CONFIG_X86_INTEL_LPSS is not set
-CONFIG_X86_INTERNODE_CACHE_SHIFT=4
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_LONGHAUL is not set
-CONFIG_X86_PAE=y
-# CONFIG_X86_PAT is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_PPRO_FENCE is not set
-# CONFIG_XEN is not set
+++ /dev/null
-BOARDNAME:=KVM Guest
-FEATURES:=ext4 pci usb
-DEFAULT_PACKAGES += kmod-acpi-button kmod-button-hotplug kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
-CPU_TYPE := pentium4
+++ /dev/null
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/rdc321x-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RDC321x watchdog
- DEPENDS:=@TARGET_x86_rdc
- KCONFIG:=CONFIG_RDC321X_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
-endef
-
-define KernelPackage/rdc321x-wdt/description
- RDC-321x watchdog driver
-endef
-
-$(eval $(call KernelPackage,rdc321x-wdt))
-
+++ /dev/null
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d
-
- /* We must finish initialization here */
-
-+#ifdef CONFIG_X86_RDC321X
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
-+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
-+
-+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
-+ config_writel(socket, 35*4, 0x00000022);
-+ config_writel(socket, 36*4, 0x60200000);
-+ config_writel(socket, 40*4, 0x7e020000);
-+#endif
-+
- if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
- /* No IRQ or request_irq failed. Poll */
- socket->cb_irq = 0; /* But zero is a valid IRQ number. */
+++ /dev/null
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -531,6 +531,8 @@ config X86_RDC321X
- depends on X86_EXTENDED_PLATFORM
- select M486
- select X86_REBOOTFIXUPS
-+ select EMBEDDED
-+ select ARCH_REQUIRE_GPIOLIB
- ---help---
- This option is needed for RDC R-321x system-on-chip, also known
- as R-8610-(G).
+++ /dev/null
---- /dev/null
-+++ b/Documentation/x86/rdc.txt
-@@ -0,0 +1,69 @@
-+
-+Introduction
-+============
-+
-+RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
-+(system-on-chips) for a number of years. They are not the fastest of
-+CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
-+coupled with very low power consumption[1] and low cost make them ideal
-+for embedded applications.
-+
-+
-+Where to find
-+=============
-+
-+RDC chips show up in numerous embedded devices, but be careful since
-+many of them will not run Linux 2.6 without significant expertise.
-+
-+There are several variants of what the linux kernel refers to generically
-+as RDC321X: R8610, R321x, S3282 and AMRISC20000.
-+
-+R321x: Found in various routers, see the libreCMC project for details,
-+ http://wiki.librecmc.org/oldwiki/rdcport
-+
-+R8610: Found on the RDC evaluation board
-+ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
-+
-+AMRISC20000: Found in the MGB-100 wireless hard disk
-+ http://tintuc.no-ip.com/linux/tipps/mgb100/
-+
-+S3282: Found in various NAS devices, including the Bifferboard
-+ http://www.bifferos.com
-+
-+
-+Kernel Configuration
-+====================
-+
-+Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths
-+emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
-+(CONFIG_X86_MCE not selected).
-+
-+
-+CPU detection
-+=============
-+
-+None of these chips support the cpuid instruction, so as with some
-+other x86 compatible SoCs, we must check the north bridge and look
-+for specific 'signature' PCI device config.
-+
-+The current detection code has been tested only on the Bifferboard
-+(S3282 CPU), please send bug reports or success stories with
-+other devices to bifferos@yahoo.co.uk.
-+
-+
-+Credits
-+=======
-+
-+Many thanks to RDC for providing the customer codes to allow
-+detection of all known variants, without which this detection code
-+would have been very hard to ascertain.
-+
-+
-+References
-+==========
-+
-+[1] S3282 in certain NAS solutions consumes less than 1W
-+
-+
-+mark@bifferos.com 2009
-+
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -529,6 +529,7 @@ config X86_RDC321X
- bool "RDC R-321x SoC"
- depends on X86_32
- depends on X86_EXTENDED_PLATFORM
-+ select PCI
- select M486
- select X86_REBOOTFIXUPS
- select EMBEDDED
---- a/arch/x86/include/asm/processor.h
-+++ b/arch/x86/include/asm/processor.h
-@@ -136,7 +136,8 @@ struct cpuinfo_x86 {
- #define X86_VENDOR_CENTAUR 5
- #define X86_VENDOR_TRANSMETA 7
- #define X86_VENDOR_NSC 8
--#define X86_VENDOR_NUM 9
-+#define X86_VENDOR_RDC 9
-+#define X86_VENDOR_NUM 10
-
- #define X86_VENDOR_UNKNOWN 0xff
-
---- a/arch/x86/kernel/cpu/Makefile
-+++ b/arch/x86/kernel/cpu/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix
- obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
- obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
- obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
-+obj-$(CONFIG_X86_RDC321X) += rdc.o
-
- obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-
---- /dev/null
-+++ b/arch/x86/kernel/cpu/rdc.c
-@@ -0,0 +1,69 @@
-+/*
-+ * See Documentation/x86/rdc.txt
-+ *
-+ * mark@bifferos.com
-+ */
-+
-+#include <linux/pci.h>
-+#include <asm/pci-direct.h>
-+#include "cpu.h"
-+
-+
-+static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
-+{
-+ u16 vendor, device;
-+ u32 customer_id;
-+
-+ if (!early_pci_allowed())
-+ return;
-+
-+ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */
-+ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
-+ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
-+
-+ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
-+ return; /* not RDC */
-+ /*
-+ * NB: We could go on and check other devices, e.g. r6040 NIC, but
-+ * that's probably overkill
-+ */
-+
-+ customer_id = read_pci_config(0, 0, 0, 0x90);
-+
-+ switch (customer_id) {
-+ /* id names are from RDC */
-+ case 0x00321000:
-+ strcpy(c->x86_model_id, "R3210/R3211");
-+ break;
-+ case 0x00321001:
-+ strcpy(c->x86_model_id, "AMITRISC20000/20010");
-+ break;
-+ case 0x00321002:
-+ strcpy(c->x86_model_id, "R3210X/Edimax");
-+ break;
-+ case 0x00321003:
-+ strcpy(c->x86_model_id, "R3210/Kcodes");
-+ break;
-+ case 0x00321004: /* tested */
-+ strcpy(c->x86_model_id, "S3282/CodeTek");
-+ break;
-+ case 0x00321007:
-+ strcpy(c->x86_model_id, "R8610");
-+ break;
-+ default:
-+ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
-+ break;
-+ }
-+
-+ strcpy(c->x86_vendor_id, "RDC");
-+ c->x86_vendor = X86_VENDOR_RDC;
-+}
-+
-+static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
-+ .c_vendor = "RDC",
-+ .c_ident = { "RDC" },
-+ .c_identify = rdc_identify,
-+ .c_x86_vendor = X86_VENDOR_RDC,
-+};
-+
-+cpu_dev_register(rdc_cpu_dev);
+++ /dev/null
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
-
- quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
-- lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+ lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- (rm -f $@ ; false)
-
- quiet_cmd_lzo = LZO $@
---- a/arch/x86/include/asm/boot.h
-+++ b/arch/x86/include/asm/boot.h
-@@ -23,7 +23,7 @@
- #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
- #endif
-
--#ifdef CONFIG_KERNEL_BZIP2
-+#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
- #define BOOT_HEAP_SIZE 0x400000
- #else /* !CONFIG_KERNEL_BZIP2 */
-
+++ /dev/null
---- a/drivers/mtd/mtdblock.c
-+++ b/drivers/mtd/mtdblock.c
-@@ -63,7 +63,7 @@ static void erase_callback(struct erase_
- wake_up(wait_q);
- }
-
--static int erase_write (struct mtd_info *mtd, unsigned long pos,
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
- int len, const char *buf)
- {
- struct erase_info erase;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -416,6 +416,9 @@ extern void register_mtd_user (struct mt
- extern int unregister_mtd_user (struct mtd_notifier *old);
- void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
-
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
-+ int len, const char *buf);
-+
- void mtd_erase_callback(struct erase_info *instr);
-
- static inline int mtd_is_bitflip(int err) {
+++ /dev/null
---- a/arch/x86/Makefile
-+++ b/arch/x86/Makefile
-@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/
- # See arch/x86/Kbuild for content of core part of the kernel
- core-y += arch/x86/
-
-+# RDC R-321X support
-+core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
-+
- # drivers-y are linked after core-y
- drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
- drivers-$(CONFIG_PCI) += arch/x86/pci/
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the RDC321x specific parts of the kernel
-+#
-+obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
-+
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/platform.c
-@@ -0,0 +1,115 @@
-+/*
-+ * Generic RDC321x platform devices
-+ *
-+ * Copyright (C) 2007-2009 OpenWrt.org
-+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/root_dev.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static struct rdc_platform_data rdcplat_data;
-+
-+/* LEDS */
-+static struct platform_device rdc321x_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &rdcplat_data.led_data,
-+ }
-+};
-+
-+/* Button */
-+static struct platform_device rdc321x_buttons = {
-+ .name = "gpio-keys-polled",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &rdcplat_data.button_data,
-+ }
-+};
-+
-+static __initdata struct platform_device *rdc321x_devs[] = {
-+ &rdc321x_leds,
-+ &rdc321x_buttons,
-+};
-+
-+const char *__initdata boards[] = {
-+ "Sitecom",
-+ "AR525W",
-+ "Bifferboard",
-+ "R8610",
-+ 0
-+};
-+
-+static struct map_info rdc_map_info = {
-+ .name = "rdc_flash",
-+ .size = 0x800000, /* 8MB */
-+ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */
-+ .bankwidth = 2,
-+};
-+
-+static int __init rdc_board_setup(void)
-+{
-+ struct mtd_info *mtdinfo;
-+ struct mtd_part_parser_data *ppdata;
-+ int res;
-+
-+ simple_map_init(&rdc_map_info);
-+
-+ while (1) {
-+ rdc_map_info.virt = ioremap(rdc_map_info.phys,
-+ rdc_map_info.size);
-+ if (rdc_map_info.virt == NULL)
-+ continue;
-+
-+ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
-+ if (mtdinfo == NULL)
-+ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
-+ if (mtdinfo != NULL)
-+ break;
-+
-+ iounmap(rdc_map_info.virt);
-+ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */
-+ panic("RDC321x: Could not find start of flash!");
-+ rdc_map_info.phys = (u32) -rdc_map_info.size;
-+ }
-+
-+ /*
-+ * TODO: add a new field to mtd_part_parser_data, and use that
-+ * instead of this ugly casting
-+ */
-+ ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
-+ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
-+ if (res) {
-+ panic("RDC321x: can't identify board type");
-+ return -ENOSYS;
-+ }
-+
-+ ROOT_DEV = 0;
-+
-+ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
-+}
-+late_initcall(rdc_board_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/ar525w.c
-@@ -0,0 +1,251 @@
-+/*
-+ * ar525w RDC321x platform devices
-+ *
-+ * Copyright (C) 2007-2009 OpenWrt.org
-+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+ char magic[4]; /* ASICII: GMTK */
-+ u32 checksum; /* CRC32 */
-+ u32 version; /* x.x.x.x */
-+ u32 kernelsz; /* The size of the kernel image */
-+ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */
-+ u32 pid; /* Product ID */
-+ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */
-+ u32 reserved;
-+};
-+
-+static struct gpio_led ar525w_leds[] = {
-+ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
-+};
-+static struct gpio_keys_button ar525w_btns[] = {
-+ {
-+ .gpio = 6,
-+ .code = BTN_0,
-+ .desc = "Reset",
-+ .active_low = 1,
-+ }
-+};
-+
-+static u32 __initdata crctab[257] = {
-+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-+ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-+ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-+ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-+ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-+ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-+ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-+ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-+ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-+ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-+ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-+ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-+ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-+ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-+ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-+ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-+ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-+ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-+ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-+ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-+ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-+ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-+ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-+ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-+ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-+ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-+ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-+ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-+ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-+ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-+ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-+ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-+ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-+ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-+ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-+ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-+ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-+ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-+ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-+ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-+ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-+ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-+ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-+ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-+ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-+ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-+ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-+ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-+ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-+ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-+ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-+ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
-+ 0
-+};
-+
-+static u32 __init crc32(u8 * buf, u32 len)
-+{
-+ register int i;
-+ u32 sum;
-+ register u32 s0;
-+ s0 = ~0;
-+ for (i = 0; i < len; i++) {
-+ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
-+ }
-+ sum = ~s0;
-+ return sum;
-+}
-+
-+static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
-+{
-+ char *buffer;
-+ int res;
-+ u32 bufferlength = header->kernelsz + sizeof(struct image_header);
-+ u32 len;
-+ static char crcbuf[0x400];
-+
-+ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
-+ header->imagesz, bufferlength);
-+
-+ buffer = vmalloc(bufferlength);
-+ if (!buffer) {
-+ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
-+ return -ENOMEM;
-+ }
-+
-+ res = mtd_read(master, 0x0, bufferlength, &len, buffer);
-+ if (res || len != bufferlength)
-+ goto out;
-+
-+ header = (struct image_header *) buffer;
-+ header->imagesz = bufferlength;
-+ header->checksum = 0;
-+ header->fastcksum = 0;
-+
-+ memcpy(crcbuf, buffer, 0x100);
-+ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
-+ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
-+
-+ header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
-+ header->checksum = crc32(buffer, bufferlength);
-+
-+ res = mtd_unlock(master, 0, master->erasesize);
-+ if (res != 0 && res != -EOPNOTSUPP) {
-+ printk(KERN_ERR "Can't unlock image header\n");
-+ goto out;
-+ }
-+
-+ res = erase_write (master, 0, master->erasesize, buffer);
-+ if (res)
-+ printk(KERN_ERR "Can't rewrite image header\n");
-+
-+out:
-+ vfree(buffer);
-+ return res;
-+}
-+
-+static int __init
-+parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *plat_data)
-+{
-+ struct image_header header;
-+ int res;
-+ size_t len;
-+ struct mtd_partition *rdc_flash_parts;
-+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+ if (master->size != 0x400000) //4MB
-+ return -ENOSYS;
-+
-+ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header);
-+ if (res)
-+ return res;
-+
-+ if (strncmp(header.magic, "GMTK", 4))
-+ return -ENOSYS;
-+
-+ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
-+ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
-+ return -EINVAL;
-+ }
-+
-+ if (header.kernelsz + sizeof(header) != header.imagesz) {
-+ res = fixup_ar525w_header(master, &header);
-+ if (res)
-+ return res;
-+ }
-+
-+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+ rdc_flash_parts[0].name = "firmware";
-+ rdc_flash_parts[0].offset = 0x0;
-+ rdc_flash_parts[0].size = 0x3E0000;
-+ rdc_flash_parts[1].name = "rootfs";
-+ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
-+ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
-+ rdc_flash_parts[2].name = "bootloader";
-+ rdc_flash_parts[2].offset = 0x3E0000;
-+ rdc_flash_parts[2].size = 0x20000;
-+
-+ *pparts = rdc_flash_parts;
-+
-+ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
-+ pdata->led_data.leds = ar525w_leds;
-+ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
-+ pdata->button_data.buttons = ar525w_btns;
-+
-+ return 3;
-+}
-+
-+static struct mtd_part_parser __initdata ar525w_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_ar525w_partitions,
-+ .name = "AR525W",
-+};
-+
-+static int __init ar525w_setup(void)
-+{
-+ return register_mtd_parser(&ar525w_parser);
-+}
-+
-+arch_initcall(ar525w_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
-@@ -0,0 +1,74 @@
-+/*
-+ * Bifferboard RDC321x platform devices
-+ *
-+ * Copyright (C) 2010 bifferos@yahoo.co.uk
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_bifferboard_partitions(struct mtd_info *master,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *plat_data)
-+{
-+ int res;
-+ size_t len;
-+ struct mtd_partition *rdc_flash_parts;
-+ u32 kernel_len;
-+ u16 tmp;
-+
-+ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
-+ if (res)
-+ return res;
-+ kernel_len = tmp * master->erasesize;
-+
-+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+ *pparts = rdc_flash_parts;
-+
-+ rdc_flash_parts[0].name = "kernel";
-+ rdc_flash_parts[0].offset = 0;
-+ rdc_flash_parts[0].size = kernel_len;
-+ rdc_flash_parts[1].name = "rootfs";
-+ rdc_flash_parts[1].offset = kernel_len;
-+ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
-+ rdc_flash_parts[2].name = "biffboot";
-+ rdc_flash_parts[2].offset = master->size - 0x10000;
-+ rdc_flash_parts[2].size = 0x10000;
-+
-+ return 3;
-+}
-+
-+struct mtd_part_parser __initdata bifferboard_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_bifferboard_partitions,
-+ .name = "Bifferboard",
-+};
-+
-+static int __init bifferboard_setup(void)
-+{
-+ return register_mtd_parser(&bifferboard_parser);
-+}
-+arch_initcall(bifferboard_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/r8610.c
-@@ -0,0 +1,69 @@
-+/*
-+ * R8610 RDC321x platform devices
-+ *
-+ * Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *plat_data)
-+{
-+ struct mtd_partition *rdc_flash_parts;
-+
-+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
-+
-+ *pparts = rdc_flash_parts;
-+
-+ rdc_flash_parts[0].name = "kernel";
-+ rdc_flash_parts[0].size = 0x001f0000;
-+ rdc_flash_parts[0].offset = 0;
-+ rdc_flash_parts[1].name = "config";
-+ rdc_flash_parts[1].size = 0x10000;
-+ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
-+ rdc_flash_parts[2].name = "rootfs";
-+ rdc_flash_parts[2].size = 0x1E0000;
-+ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
-+ rdc_flash_parts[3].name = "redboot";
-+ rdc_flash_parts[3].size = 0x20000;
-+ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
-+ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
-+
-+ return 4;
-+}
-+
-+struct mtd_part_parser __initdata r8610_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_r8610_partitions,
-+ .name = "R8610",
-+};
-+
-+static int __init r8610_setup(void)
-+{
-+ return register_mtd_parser(&r8610_parser);
-+}
-+
-+arch_initcall(r8610_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/sitecom.c
-@@ -0,0 +1,115 @@
-+/*
-+ * Sitecom RDC321x platform devices
-+ *
-+ * Copyright (C) 2007-2009 OpenWrt.org
-+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+ char magic[4];
-+ u32 kernel_length;
-+ u32 ramdisk_length;
-+ char magic2[4];
-+ u32 kernel_length2;
-+};
-+
-+static struct gpio_led sitecom_leds[] = {
-+ { .name = "rdc321x:power", .gpio = 15, .active_low = 1},
-+ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
-+ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
-+};
-+
-+static struct gpio_keys_button sitecom_btns[] = {
-+ {
-+ .gpio = 6,
-+ .code = BTN_0,
-+ .desc = "Reset",
-+ .active_low = 1,
-+ }
-+};
-+
-+static int __init
-+parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *plat_data)
-+{
-+ struct image_header header;
-+ int res;
-+ size_t len;
-+ struct mtd_partition *rdc_flash_parts;
-+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+ if (master->size != 0x400000) /* 4MB */
-+ return -ENOSYS;
-+
-+ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header);
-+ if (res)
-+ return res;
-+
-+ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
-+ return -ENOSYS;
-+
-+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
-+
-+ rdc_flash_parts[0].name = "firmware";
-+ rdc_flash_parts[0].offset = 0x8000;
-+ rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
-+ rdc_flash_parts[1].name = "config";
-+ rdc_flash_parts[1].offset = 0;
-+ rdc_flash_parts[1].size = 0x8000;
-+ rdc_flash_parts[2].name = "kernel";
-+ rdc_flash_parts[2].offset = 0x8014;
-+ rdc_flash_parts[2].size = header.kernel_length;
-+ rdc_flash_parts[3].name = "rootfs";
-+ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
-+ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
-+ rdc_flash_parts[4].name = "bootloader";
-+ rdc_flash_parts[4].offset = 0x3F0000;
-+ rdc_flash_parts[4].size = 0x10000;
-+
-+ *pparts = rdc_flash_parts;
-+
-+ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
-+ pdata->led_data.leds = sitecom_leds;
-+ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
-+ pdata->button_data.buttons = sitecom_btns;
-+
-+ return 5;
-+}
-+
-+struct mtd_part_parser __initdata sitecom_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_sitecom_partitions,
-+ .name = "Sitecom",
-+};
-+
-+static int __init sitecom_setup(void)
-+{
-+ return register_mtd_parser(&sitecom_parser);
-+}
-+
-+arch_initcall(sitecom_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/reboot.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+static void rdc321x_reset(void)
-+{
-+ unsigned i;
-+
-+ /* write to southbridge config register 0x41
-+ enable pci reset on cpu reset, make internal port 0x92 writeable
-+ and switch port 0x92 to internal */
-+ outl(0x80003840, 0xCF8);
-+ i = inl(0xCFC);
-+ i |= 0x1600;
-+ outl(i, 0xCFC);
-+
-+ /* soft reset */
-+ outb(1, 0x92);
-+}
-+
-+static int __init rdc_setup_reset(void)
-+{
-+ machine_ops.emergency_restart = rdc321x_reset;
-+ return 0;
-+}
-+
-+arch_initcall(rdc_setup_reset);
---- /dev/null
-+++ b/arch/x86/include/asm/rdc_boards.h
-@@ -0,0 +1,36 @@
-+/*
-+ * RDC321x boards
-+ *
-+ * Copyright (C) 2007-2009 OpenWrt.org
-+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ * Boston, MA 02110-1301, USA.
-+ *
-+ */
-+
-+#ifndef _RDC_BOARDS_H__
-+#define _RDC_BOARDS_H__
-+
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+
-+struct rdc_platform_data {
-+ struct gpio_led_platform_data led_data;
-+ struct gpio_keys_platform_data button_data;
-+};
-+
-+#endif
+++ /dev/null
---- a/drivers/mfd/rdc321x-southbridge.c
-+++ b/drivers/mfd/rdc321x-southbridge.c
-@@ -85,6 +85,8 @@ static int rdc321x_sb_probe(struct pci_d
- rdc321x_gpio_pdata.sb_pdev = pdev;
- rdc321x_wdt_pdata.sb_pdev = pdev;
-
-+ panic_on_unrecovered_nmi = 1;
-+
- return mfd_add_devices(&pdev->dev, -1,
- rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
- NULL, 0, NULL);
+++ /dev/null
---- a/include/linux/timex.h
-+++ b/include/linux/timex.h
-@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti
- void ntp_notify_cmos_timer(void);
-
- /* The clock frequency of the i8253/i8254 PIT */
-+#ifdef CONFIG_X86_RDC321X
-+#define PIT_TICK_RATE 1041816ul
-+#else
- #define PIT_TICK_RATE 1193182ul
-+#endif
-
- #endif /* LINUX_TIMEX_H */
+++ /dev/null
-From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
-From: root <root@cent.localnet>
-Date: Sun, 6 Dec 2009 18:26:43 +0000
-Subject: [PATCH 03/14] kexec fix
-
----
- arch/x86/kernel/relocate_kernel_32.S | 6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/arch/x86/kernel/relocate_kernel_32.S
-+++ b/arch/x86/kernel/relocate_kernel_32.S
-@@ -54,8 +54,10 @@ relocate_kernel:
- movl %eax, CR0(%edi)
- movl %cr3, %eax
- movl %eax, CR3(%edi)
-+#ifndef CONFIG_X86_RDC321X
- movl %cr4, %eax
- movl %eax, CR4(%edi)
-+#endif
-
- /* read the arguments and say goodbye to the stack */
- movl 20+4(%esp), %ebx /* page_list */
-@@ -124,7 +126,9 @@ identity_mapped:
- * Setting everything to zero seems safe.
- */
- xorl %eax, %eax
-+#ifndef CONFIG_X86_RDC321X
- movl %eax, %cr4
-+#endif
-
- jmp 1f
- 1:
-@@ -195,8 +199,10 @@ identity_mapped:
- ret
-
- virtual_mapped:
-+#ifndef CONFIG_X86_RDC321X
- movl CR4(%edi), %eax
- movl %eax, %cr4
-+#endif
- movl CR3(%edi), %eax
- movl %eax, %cr3
- movl CR0(%edi), %eax
+++ /dev/null
-# Copyright (C) 2009 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth1
- option type bridge
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
- option ip6assign 60
-
-config interface wan
- option ifname eth0
- option proto dhcp
-
-config interface wan6
- option ifname eth0
- option proto dhcpv6
-
-config globals globals
- option ula_prefix auto
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2007-2013 OpenWrt.org
-
-. /lib/functions/leds.sh
-
-status_led="rdc321x:dmz"
-
-set_state() {
- case "$1" in
- preinit)
- status_led_on
- ;;
- done)
- status_led_off
- ;;
- esac
-}
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2009-2012 OpenWrt.org
-
-. /lib/functions.sh
-
-r6040_module() {
- insmod libphy
- insmod swconfig
- insmod ip17xx
- sleep 1
- insmod r6040
-}
-
-set_ether_mac() {
- kernel=$(grep firmware /proc/mtd | awk -F: '{print $1}')
- [ -n "$kernel" ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null)
- [ "$hdr" = "CSYS" ] && config=$(find_mtd_part config)
- if [ -n "$config" ]; then
- mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-)
- [ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0
- mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-)
- [ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac1" = "0:0:0:0:0:0" ] && unset mac1
- fi
- if [ -n "$mac0" ]; then
- logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0"
- ifconfig eth0 hw ether "$mac0"
- fi
- if [ -n "$mac1" ]; then
- logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1"
- ifconfig eth1 hw ether "$mac1"
- fi
-}
-
-boot_hook_add preinit_main r6040_module
-boot_hook_add preinit_main set_ether_mac
-
+++ /dev/null
-PART_NAME=firmware
-
-platform_check_image() {
- [ "$(get_magic_word $(find_mtd_part firmware))" -eq "$(get_magic_word "$1")" ] && return 0
-
- echo "Invalid image type. Please use an appropriate .bin file"
- return 1
-}
-
-# use default for platform_do_upgrade()
+++ /dev/null
-CONFIG_ARCH_RANDOM=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARPD is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BRIDGE=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=uart,io,0x3f8 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CPU_SUP_AMD is not set
-# CONFIG_CPU_SUP_CENTAUR is not set
-# CONFIG_CPU_SUP_CYRIX_32 is not set
-# CONFIG_CPU_SUP_INTEL is not set
-# CONFIG_CPU_SUP_TRANSMETA_32 is not set
-# CONFIG_CPU_SUP_UMC_32 is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RDC321X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HPET_TIMER is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_IP_MROUTE is not set
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LLC=m
-CONFIG_MFD_CORE=y
-CONFIG_MFD_RDC321X=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MTRR is not set
-CONFIG_NLS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-# CONFIG_PCI_QUIRKS is not set
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_PROCESSOR_SELECT=y
-CONFIG_RDC321X_WDT=m
-# CONFIG_SCx200 is not set
-# CONFIG_SHMEM is not set
-CONFIG_STP=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_VM86 is not set
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_INTERNODE_CACHE_SHIFT=4
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_MCE is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_X86_PPRO_FENCE is not set
-CONFIG_X86_RDC321X=y
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_X86_WANT_INTEL_MID is not set
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/ar525w
- NAME:=Airlink AR525W
- PACKAGES:=kmod-rt61-pci kmod-switch-ip17xx swconfig
-endef
-$(eval $(call Profile,ar525w))
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/bifferboard
- NAME:=Bifferboard
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
- kmod-usb-storage kmod-scsi-core kmod-fs-ext4
-endef
-$(eval $(call Profile,bifferboard))
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/r8610
- NAME:=RDC R8610 Evaluation Board
- PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
- kmod-hwmon-core kmod-hwmon-w83627hf kmod-ide-core kmod-ide-it821x \
- kmod-rtc-core kmod-rtc-m48t86 kmod-fs-ext4
-endef
-$(eval $(call Profile,r8610))
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/sitecom
- NAME:=Devices from Sitecom (WL-153, DC-230)
- PACKAGES:=kmod-rt61-pci kmod-usb-core kmod-usb-ohci kmod-usb2
-endef
-$(eval $(call Profile,sitecom))
+++ /dev/null
-BOARDNAME:=RDC R-321x
-FEATURES:=squashfs pci usb gpio pcmcia
-MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-FEATURES += broken
-
-DEFAULT_PACKAGES += kmod-llc kmod-stp kmod-bridge kmod-8021q \
- wpad-mini kmod-libphy kmod-r6040 kmod-input-core \
- kmod-input-polldev kmod-button-hotplug kmod-rdc321x-wdt
-
-define Target/Description
- Build firmware images for RDC321x based routers
- (e.g. Airlink101 AR525W, Linksys WRT54GR, Sitecom WL-153)
-endef
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K stop
-tts/0::askfirst:/bin/ash --login
-hvc0::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2010 OpenWrt.org
-
-do_mount_xenfs() {
- [ -f /etc/modules.d/??-xenfs ] && {
- insmod $(cat /etc/modules.d/??-xenfs)
- mount -o noatime none /proc/xen -t xenfs
- }
-}
-
-boot_hook_add preinit_mount_root do_mount_xenfs
+++ /dev/null
-# CONFIG_APM is not set
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_CPU_RMAP=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-CONFIG_FREEZER=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_HIBERNATE_CALLBACKS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_LGUEST_GUEST is not set
-# CONFIG_M486 is not set
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MPENTIUM4=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NR_CPUS=4
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-CONFIG_PCI_XEN=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCHED_MC=y
-CONFIG_SLUB_CPU_PARTIAL=y
-CONFIG_SMP=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_TREE_RCU=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-# CONFIG_VMWARE_BALLOON is not set
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_X86_32_SMP=y
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_HT=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=7
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
-CONFIG_X86_PAE=y
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_XEN=y
-# CONFIG_XENFS is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_DEBUG_FS=y
-# CONFIG_XEN_DEV_EVTCHN is not set
-CONFIG_XEN_GNTDEV=m
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_HAVE_PVMMU=y
-CONFIG_XEN_MAX_DOMAIN_MEMORY=64
-# CONFIG_XEN_NETDEV_FRONTEND is not set
-# CONFIG_XEN_PCIDEV_FRONTEND is not set
-CONFIG_XEN_PRIVCMD=m
-# CONFIG_XEN_PRIVILEGED_GUEST is not set
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_WDT is not set
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
+++ /dev/null
-BOARDNAME:=Xen Paravirt Guest
-DEFAULT_PACKAGES += kmod-xen-fs kmod-xen-evtchn kmod-xen-netdev kmod-xen-kbddev
-FEATURES:=display ext4 targz
-CPU_TYPE := pentium4
projects / librecmc / librecmc-fossil.git / commitdiff