rockchip: clk: rk3399: add clock support for SCLK_SPI1 and SCLK_SPI5
authorPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Thu, 20 Apr 2017 20:05:49 +0000 (22:05 +0200)
committerSimon Glass <sjg@chromium.org>
Wed, 10 May 2017 19:37:21 +0000 (13:37 -0600)
This change adds support for configuring the module clocks for SPI1 and
SPI5 from the 594MHz GPLL.

Note that the driver (rk_spi.c) always sets this to 99MHz, but the
implemented functionality is more general and will also support
different clock configurations.

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
drivers/clk/rockchip/clk_rk3399.c

index ff3cc37af33842f534b0f0cbeaf426ae269e4738..1c53ca247e65ad03d8f85875a632d2852934bd52 100644 (file)
@@ -1,5 +1,6 @@
 /*
  * (C) Copyright 2015 Google, Inc
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
  *
  * SPDX-License-Identifier:    GPL-2.0
  */
@@ -207,12 +208,15 @@ enum {
        DCLK_VOP_DIV_CON_SHIFT          = 0,
 
        /* CLKSEL_CON58 */
-       CLK_SPI_PLL_SEL_MASK            = 1,
-       CLK_SPI_PLL_SEL_CPLL            = 0,
-       CLK_SPI_PLL_SEL_GPLL            = 1,
-       CLK_SPI_PLL_DIV_CON_MASK        = 0x7f,
-       CLK_SPI5_PLL_DIV_CON_SHIFT      = 8,
-       CLK_SPI5_PLL_SEL_SHIFT          = 15,
+       CLK_SPI_PLL_SEL_WIDTH = 1,
+       CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1),
+       CLK_SPI_PLL_SEL_CPLL = 0,
+       CLK_SPI_PLL_SEL_GPLL = 1,
+       CLK_SPI_PLL_DIV_CON_WIDTH = 7,
+       CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1),
+
+       CLK_SPI5_PLL_DIV_CON_SHIFT      = 8,
+       CLK_SPI5_PLL_SEL_SHIFT          = 15,
 
        /* CLKSEL_CON59 */
        CLK_SPI1_PLL_SEL_SHIFT          = 15,
@@ -605,6 +609,96 @@ static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
        return DIV_TO_RATE(GPLL_HZ, src_clk_div);
 }
 
+/*
+ * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit
+ * to select either CPLL or GPLL as the clock-parent. The location within
+ * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
+ */
+
+struct spi_clkreg {
+       uint8_t reg;  /* CLKSEL_CON[reg] register in CRU */
+       uint8_t div_shift;
+       uint8_t sel_shift;
+};
+
+/*
+ * The entries are numbered relative to their offset from SCLK_SPI0.
+ *
+ * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different
+ * logic is not supported).
+ */
+static const struct spi_clkreg spi_clkregs[] = {
+       [0] = { .reg = 59,
+               .div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT,
+               .sel_shift = CLK_SPI0_PLL_SEL_SHIFT, },
+       [1] = { .reg = 59,
+               .div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT,
+               .sel_shift = CLK_SPI1_PLL_SEL_SHIFT, },
+       [2] = { .reg = 60,
+               .div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT,
+               .sel_shift = CLK_SPI2_PLL_SEL_SHIFT, },
+       [3] = { .reg = 60,
+               .div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT,
+               .sel_shift = CLK_SPI4_PLL_SEL_SHIFT, },
+       [4] = { .reg = 58,
+               .div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT,
+               .sel_shift = CLK_SPI5_PLL_SEL_SHIFT, },
+};
+
+static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
+{
+       return (val >> shift) & ((1 << width) - 1);
+}
+
+static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id)
+{
+       const struct spi_clkreg *spiclk = NULL;
+       u32 div, val;
+
+       switch (clk_id) {
+       case SCLK_SPI0 ... SCLK_SPI5:
+               spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
+               break;
+
+       default:
+               error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+               return -EINVAL;
+       }
+
+       val = readl(&cru->clksel_con[spiclk->reg]);
+       div = extract_bits(val, CLK_SPI_PLL_DIV_CON_WIDTH, spiclk->div_shift);
+
+       return DIV_TO_RATE(GPLL_HZ, div);
+}
+
+static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
+{
+       const struct spi_clkreg *spiclk = NULL;
+       int src_clk_div;
+
+       src_clk_div = RATE_TO_DIV(GPLL_HZ, hz);
+       assert(src_clk_div < 127);
+
+       switch (clk_id) {
+       case SCLK_SPI1 ... SCLK_SPI5:
+               spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
+               break;
+
+       default:
+               error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+               return -EINVAL;
+       }
+
+       rk_clrsetreg(&cru->clksel_con[spiclk->reg],
+                    ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) |
+                      (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)),
+                    ((src_clk_div << spiclk->div_shift) |
+                     (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)));
+
+
+       return DIV_TO_RATE(GPLL_HZ, src_clk_div);
+}
+
 static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
 {
        struct pll_div vpll_config = {0};
@@ -780,6 +874,12 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
        case SCLK_I2C7:
                rate = rk3399_i2c_get_clk(priv->cru, clk->id);
                break;
+       case SCLK_SPI0...SCLK_SPI5:
+               rate = rk3399_spi_get_clk(priv->cru, clk->id);
+               break;
+       case SCLK_UART0:
+       case SCLK_UART2:
+               return 24000000;
        case DCLK_VOP0:
        case DCLK_VOP1:
                break;
@@ -814,6 +914,9 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
        case SCLK_I2C7:
                ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate);
                break;
+       case SCLK_SPI0...SCLK_SPI5:
+               ret = rk3399_spi_set_clk(priv->cru, clk->id, rate);
+               break;
        case DCLK_VOP0:
        case DCLK_VOP1:
                ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);