TQM5200: Add Flat Device Tree support, update default env. accordingly.
authorBartlomiej Sieka <tur@semihalf.com>
Fri, 8 Jun 2007 12:52:22 +0000 (14:52 +0200)
committerBartlomiej Sieka <tur@semihalf.com>
Fri, 8 Jun 2007 12:52:22 +0000 (14:52 +0200)
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
board/tqm5200/tqm5200.c
include/configs/TQM5200.h

index a4322b6661a02e6b91c0505b6f70c94590017247..cf97603afc5295fa9faae21a784140f90ecb4835 100644 (file)
 #include <pci.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
 #endif
@@ -775,3 +779,10 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+       ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
index 7935593febe62b992bc20d858b8543734f372d3e..9da1d884b144828e4892905c45868543d5b585b9 100644 (file)
 #ifndef CONFIG_CAM5200
 #define CUSTOM_ENV_SETTINGS                                            \
        "bootfile=/tftpboot/tqm5200/uImage\0"                           \
+       "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0"                   \
+       "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"                      \
        "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
 #else
 #define CUSTOM_ENV_SETTINGS                                            \
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       "console=ttyS0\0"                                               \
+       "kernel_addr=200000\0"                                          \
+       "fdt_addr=400000\0"                                             \
+       "hostname=tqm5200\0"                                            \
        "netdev=eth0\0"                                                 \
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
                ":${hostname}:${netdev}:off panic=1\0"                  \
        "addcons=setenv bootargs ${bootargs} "                          \
-               "console=ttyS0,${baudrate}\0"                           \
+               "console=${console},${baudrate}\0"                      \
        "flash_self=run ramargs addip addcons;"                         \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addcons;"                          \
                "bootm ${kernel_addr}\0"                                \
-       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"    \
-               "bootm\0"                                               \
+       "net_nfs=tftp ${kernel_addr} ${bootfile};"                      \
+               "run nfsargs addip addcons;bootm\0"                     \
+       "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};"              \
+               "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;"  \
+               "run nfsargs addip addcons;"                            \
+               "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
        CUSTOM_ENV_SETTINGS                                             \
        "load=tftp 200000 ${u-boot}\0"                                  \
        ENV_UPDT                                                        \
 /* Interval between registers                                               */
 #define CFG_ATA_STRIDE         4
 
+/*-----------------------------------------------------------------------
+ * Open firmware flat tree support
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_OF_FLAT_TREE    1
+#define CONFIG_OF_BOARD_SETUP  1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE  8192
+#define OF_CPU                 "PowerPC,5200@0"
+#define OF_SOC                 "soc5200@f0000000"
+#define OF_TBCLK               (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH         "/soc5200@f0000000/serial@2000"
+
 #endif /* __CONFIG_H */