The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
unsigned short Id1, Id2;
at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR1, &Id1);
- at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR2, &Id2);
+ at91rm9200_EmacReadPhy(p_mac, MII_PHYSID1, &Id1);
+ at91rm9200_EmacReadPhy(p_mac, MII_PHYSID2, &Id2);
at91rm9200_EmacDisableMDIO (p_mac);
if ((Id1 == (0x0013)) && ((Id2 & 0xFFF0) == 0x78E0))
unsigned short value;
/* Set lxt972 control register */
- if (!at91rm9200_EmacReadPhy (p_mac, PHY_BMCR, &value))
+ if (!at91rm9200_EmacReadPhy (p_mac, MII_BMCR, &value))
return FALSE;
/* Restart Auto_negotiation */
- value |= PHY_BMCR_RST_NEG;
- if (!at91rm9200_EmacWritePhy (p_mac, PHY_BMCR, &value))
+ value |= BMCR_ANRESTART;
+ if (!at91rm9200_EmacWritePhy (p_mac, MII_BMCR, &value))
return FALSE;
/*check AutoNegotiate complete */
udelay (10000);
- at91rm9200_EmacReadPhy(p_mac, PHY_BMSR, &value);
- if (!(value & PHY_BMSR_AUTN_COMP))
+ at91rm9200_EmacReadPhy(p_mac, MII_BMSR, &value);
+ if (!(value & BMSR_ANEGCOMPLETE))
return FALSE;
return (lxt972_GetLinkSpeed (p_mac));
{
u_int16_t id1, id2;
- if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
+ if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
return(0);
- if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
+ if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
return(0);
if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
{
u_int16_t tmp;
- if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
- tmp |= PHY_BMCR_RST_NEG;
- davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ tmp |= BMCR_ANRESTART;
+ davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
return(0);
- if (!(tmp & PHY_BMSR_AUTN_COMP))
+ if (!(tmp & BMSR_ANEGCOMPLETE))
return(0);
return (lxt972_get_link_speed(phy_addr));
unsigned short ctl, adv;
/* Setup standard advertise */
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
- PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
- PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
+ miiphy_read (devname, addr, MII_ADVERTISE, &adv);
+ adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 |
+ LPA_100FULL | LPA_100HALF | LPA_10FULL |
+ LPA_10HALF);
+ miiphy_write (devname, addr, MII_ADVERTISE, adv);
/* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &ctl);
- ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, ctl);
+ miiphy_read (devname, addr, MII_BMCR, &ctl);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ miiphy_write (devname, addr, MII_BMCR, ctl);
return 0;
}
debug("%s: 1\n", __FUNCTION__);
- miiphy_read (dev->name, p_npe->phy_no, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, p_npe->phy_no, MII_BMSR, ®_short);
/*
* Wait if PHY is capable of autonegotiation and autonegotiation is not complete
*/
- if ((reg_short & PHY_BMSR_AUTN_ABLE) && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+ if ((reg_short & BMSR_ANEGCAPABLE) && !(reg_short & BMSR_ANEGCOMPLETE)) {
puts ("Waiting for PHY auto negotiation to complete");
i = 0;
- while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+ while (!(reg_short & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
if ((i++ % 1000) == 0) {
putc ('.');
- miiphy_read (dev->name, p_npe->phy_no, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, p_npe->phy_no, MII_BMSR, ®_short);
}
udelay (1000); /* 1 ms */
}
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+ phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type ", phytype, pass);
#endif
if (phytype != 0xffff) {
phyaddr = phyno;
phytype |= mii_send(mk_mii_read(phyno,
- PHY_PHYIDR1)) << 16;
+ MII_PHYSID1)) << 16;
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d type ",phyno,pass);
u16 exsr = 0x0000;
#endif
- miiphy_read (devname, addr, PHY_BMSR, &bmsr);
+ miiphy_read (devname, addr, MII_BMSR, &bmsr);
#if defined(CONFIG_PHY_GIGE)
- if (bmsr & PHY_BMSR_EXT_STAT)
- miiphy_read (devname, addr, PHY_EXSR, &exsr);
+ if (bmsr & BMSR_ESTATEN)
+ miiphy_read (devname, addr, MII_ESTATUS, &exsr);
- if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
+ if (exsr & (ESTATUS_1000XF | ESTATUS_1000XH)) {
/* 1000BASE-X */
u16 anar = 0x0000;
- if (exsr & PHY_EXSR_1000XF)
- anar |= PHY_X_ANLPAR_FD;
+ if (exsr & ESTATUS_1000XF)
+ anar |= ADVERTISE_1000XFULL);
- if (exsr & PHY_EXSR_1000XH)
- anar |= PHY_X_ANLPAR_HD;
+ if (exsr & ESTATUS_1000XH)
+ anar |= ADVERTISE_1000XHALF;
- miiphy_write (devname, addr, PHY_ANAR, anar);
+ miiphy_write (devname, addr, MII_ADVERTISE, anar);
} else
#endif
{
u16 anar, btcr;
- miiphy_read (devname, addr, PHY_ANAR, &anar);
- anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+ miiphy_read (devname, addr, MII_ADVERTISE, &anar);
+ anar &= ~(0x5000 | LPA_100BASE4 | LPA_100FULL |
+ LPA_100HALF | LPA_10FULL | LPA_10HALF);
- miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
+ miiphy_read (devname, addr, MII_CTRL1000, &btcr);
btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
- if (bmsr & PHY_BMSR_100T4)
- anar |= PHY_ANLPAR_T4;
+ if (bmsr & BMSR_100BASE4)
+ anar |= LPA_100BASE4;
- if (bmsr & PHY_BMSR_100TXF)
- anar |= PHY_ANLPAR_TXFD;
+ if (bmsr & BMSR_100FULL)
+ anar |= LPA_100FULL;
- if (bmsr & PHY_BMSR_100TXH)
- anar |= PHY_ANLPAR_TX;
+ if (bmsr & BMSR_100HALF)
+ anar |= LPA_100HALF;
- if (bmsr & PHY_BMSR_10TF)
- anar |= PHY_ANLPAR_10FD;
+ if (bmsr & BMSR_10FULL)
+ anar |= LPA_10FULL;
- if (bmsr & PHY_BMSR_10TH)
- anar |= PHY_ANLPAR_10;
+ if (bmsr & BMSR_10HALF)
+ anar |= LPA_10HALF;
- miiphy_write (devname, addr, PHY_ANAR, anar);
+ miiphy_write (devname, addr, MII_ADVERTISE, anar);
#if defined(CONFIG_PHY_GIGE)
- if (exsr & PHY_EXSR_1000TF)
+ if (exsr & ESTATUS_1000_TFULL)
btcr |= PHY_1000BTCR_1000FD;
- if (exsr & PHY_EXSR_1000TH)
+ if (exsr & ESTATUS_1000_THALF)
btcr |= PHY_1000BTCR_1000HD;
- miiphy_write (devname, addr, PHY_1000BTCR, btcr);
+ miiphy_write (devname, addr, MII_CTRL1000, btcr);
#endif
}
*/
u16 adv;
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD | PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
+ miiphy_read (devname, addr, MII_ADVERTISE, &adv);
+ adv |= (LPA_LPACK | LPA_100FULL | LPA_100HALF |
+ LPA_10FULL | LPA_10HALF);
+ miiphy_write (devname, addr, MII_ADVERTISE, adv);
- miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ miiphy_read (devname, addr, MII_CTRL1000, &adv);
adv |= (0x0300);
- miiphy_write (devname, addr, PHY_1000BTCR, adv);
+ miiphy_write (devname, addr, MII_CTRL1000, adv);
#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
/* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &bmcr);
- bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, bmcr);
+ miiphy_read (devname, addr, MII_BMCR, &bmcr);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ miiphy_write (devname, addr, MII_BMCR, bmcr);
return 0;
}
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
/* reset the phy */
- if (miiphy_read (name, devadr, PHY_BMCR, ®) != 0) {
+ if (miiphy_read (name, devadr, MII_BMCR, ®) != 0) {
printf("Err..(%s) PHY status read failed\n", __FUNCTION__);
return;
}
- if (miiphy_write (name, devadr, PHY_BMCR, reg | 0x8000) != 0) {
+ if (miiphy_write (name, devadr, MII_BMCR, reg | 0x8000) != 0) {
printf("Err..(%s) PHY reset failed\n", __FUNCTION__);
return;
}
/* initialize the PHY */
miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
- miiphy_read ("NPE0", CONFIG_PHY_ADDR, PHY_PHYIDR1, &id1);
- miiphy_read ("NPE0", CONFIG_PHY_ADDR, PHY_PHYIDR2, &id2);
+ miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
+ miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
id2 &= 0xFFF0; /* mask out revision bits */
miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
/* AUTO neg */
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
/* LEDs */
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_NWAYTEST, 0x0d08);
return 0; /* success */
miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
/* AUTO neg */
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
/* LEDs */
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_NWAYTEST, 0x0d08);
return 0; /* success */
}
static void
check_phy_state(struct eth_dev_s *p)
{
- int bmsr = miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_BMSR);
+ int bmsr = miiphy_read_ret(ether_port_phy_addr[p->dev], MII_BMSR);
int psr = GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + p->reg_base);
- if ((psr & 1<<3) && (bmsr & PHY_BMSR_LS)) {
- int nego = miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_ANAR) &
- miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_ANLPAR);
+ if ((psr & 1<<3) && (bmsr & BMSR_LSTATUS)) {
+ int nego = miiphy_read_ret(ether_port_phy_addr[p->dev], MII_ADVERTISE) &
+ miiphy_read_ret(ether_port_phy_addr[p->dev], MII_LPA);
int want;
- if (nego & PHY_ANLPAR_TXFD) {
+ if (nego & LPA_100FULL) {
want = 0x3;
printf("MII: 100Base-TX, Full Duplex\n");
- } else if (nego & PHY_ANLPAR_TX) {
+ } else if (nego & LPA_100HALF) {
want = 0x1;
printf("MII: 100Base-TX, Half Duplex\n");
- } else if (nego & PHY_ANLPAR_10FD) {
+ } else if (nego & LPA_10FULL) {
want = 0x2;
printf("MII: 10Base-T, Full Duplex\n");
- } else if (nego & PHY_ANLPAR_10) {
+ } else if (nego & LPA_10HALF) {
want = 0x0;
printf("MII: 10Base-T, Half Duplex\n");
} else {
* Enable autonegotiation.
*/
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
- bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#else
/*
* Ethernet PHY is configured (by means of configuration pins)
*/
/* Advertise all capabilities */
- bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_ANAR, 0x01E1);
+ bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1);
/* Do not bypass Rx/Tx (de)scrambler */
- bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_DCR, 0x0000);
+ bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER, 0x0000);
- bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
#endif /* CONFIG_MII */
}
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
- bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+ bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
- bb_miiphy_write(NULL, 0x02, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, 0x02, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_MII */
}
mii_init();
/* disable auto-negotiation, 100mbit, full-duplex */
- fec8xx_miiphy_write(NULL, 0, PHY_BMCR, 0x2100);
+ fec8xx_miiphy_write(NULL, 0, MII_BMCR, 0x2100);
/* set LED's to Link, Transmit, Receive */
- fec8xx_miiphy_write(NULL, 0, PHY_FCSCR, 0x4122);
+ fec8xx_miiphy_write(NULL, 0, MII_NWAYTEST, 0x4122);
return 0;
}
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
+ fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
if (v == 0xFFFF)
continue;
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
- PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
udelay(10000);
}
}
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
+ fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
if (v == 0xFFFF)
continue;
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
- PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
udelay(10000);
}
}
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
- fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
+ fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
if (v == 0xFFFF)
continue;
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
udelay(10000);
- fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
- PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
udelay(10000);
}
}
}
#endif /* defined(CONFIG_PHY_RESET) */
- miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, reg, MII_BMSR, ®_short);
/*
* Wait if PHY is capable of autonegotiation and autonegotiation is not complete
*/
- if ((reg_short & PHY_BMSR_AUTN_ABLE)
- && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+ if ((reg_short & BMSR_ANEGCAPABLE)
+ && !(reg_short & BMSR_ANEGCOMPLETE)) {
puts ("Waiting for PHY auto negotiation to complete");
i = 0;
- while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+ while (!(reg_short & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
putc ('.');
}
udelay (1000); /* 1 ms */
- miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, reg, MII_BMSR, ®_short);
}
puts (" done\n");
unsigned short ctl, adv;
/* Setup standard advertise */
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
- PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
- PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
+ miiphy_read (devname, addr, MII_ADVERTISE, &adv);
+ adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 |
+ LPA_100FULL | LPA_100HALF | LPA_10FULL |
+ LPA_10HALF);
+ miiphy_write (devname, addr, MII_ADVERTISE, adv);
- miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ miiphy_read (devname, addr, MII_CTRL1000, &adv);
adv |= (0x0300);
- miiphy_write (devname, addr, PHY_1000BTCR, adv);
+ miiphy_write (devname, addr, MII_CTRL1000, adv);
/* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &ctl);
- ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, ctl);
+ miiphy_read (devname, addr, MII_BMCR, &ctl);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ miiphy_write (devname, addr, MII_BMCR, ctl);
return 0;
}
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
- bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+ bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
- bb_miiphy_write(NULL, 0x02, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, 0x02, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_MII */
}
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
- bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+ bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
- bb_miiphy_write(NULL, 0x02, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, 0x02, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_MII */
#endif
}
miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
- bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+ bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
- bb_miiphy_write(NULL, 0x02, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ bb_miiphy_write(NULL, 0x02, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_MII */
#endif
}
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
- miiphy_read("FEC", phyno, PHY_PHYIDR1, &v);
+ miiphy_read("FEC", phyno, MII_PHYSID1, &v);
if (v == 0xFFFF)
continue;
- miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_POWD);
+ miiphy_write("FEC", phyno, MII_BMCR, BMCR_PDOWN);
udelay(10000);
- miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ miiphy_write("FEC", phyno, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
udelay(10000);
}
}
return 0;
for (i = 0; i < 2; i++) {
- ret = miiphy_read("FEC", phy[i], PHY_BMCR, ®);
+ ret = miiphy_read("FEC", phy[i], MII_BMCR, ®);
if (ret) {
printf("Cannot read BMCR on PHY %d\n", phy[i]);
return 0;
}
/* Auto-negotiation off, hard set full duplex, 100Mbps */
ret = miiphy_write("FEC", phy[i],
- PHY_BMCR, (reg | PHY_BMCR_100MB |
- PHY_BMCR_DPLX) & ~PHY_BMCR_AUTON);
+ MII_BMCR, (reg | BMCR_SPEED100 |
+ BMCR_FULLDPLX) & ~BMCR_ANENABLE);
if (ret) {
printf("Cannot write BMCR on PHY %d\n", phy[i]);
return 0;
} MII_reg_desc_t;
static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
- { 0, "PHY control register" },
- { 1, "PHY status register" },
- { 2, "PHY ID 1 register" },
- { 3, "PHY ID 2 register" },
- { 4, "Autonegotiation advertisement register" },
- { 5, "Autonegotiation partner abilities register" },
+ { MII_BMCR, "PHY control register" },
+ { MII_BMSR, "PHY status register" },
+ { MII_PHYSID1, "PHY ID 1 register" },
+ { MII_PHYSID2, "PHY ID 2 register" },
+ { MII_ADVERTISE, "Autonegotiation advertisement register" },
+ { MII_LPA, "Autonegotiation partner abilities register" },
};
typedef struct _MII_field_desc_t {
const MII_field_desc_t *pdesc,
ushort regval)
{
- if ((regno == 0) && (pdesc->lo == 6)) {
- ushort speed_bits = regval & PHY_BMCR_SPEED_MASK;
+ if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
+ ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
printf("%2u,%2u = b%u%u speed selection = %s Mbps",
6, 13,
(regval >> 6) & 1,
(regval >> 13) & 1,
- speed_bits == PHY_BMCR_1000_MBPS ? "1000" :
- speed_bits == PHY_BMCR_100_MBPS ? "100" :
- speed_bits == PHY_BMCR_10_MBPS ? "10" :
- "???");
+ speed_bits == BMCR_SPEED1000 ? "1000" :
+ speed_bits == BMCR_SPEED100 ? "100" :
+ "10");
return 1;
}
- else if ((regno == 0) && (pdesc->lo == 8)) {
+ else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
printf("%2u = %5u duplex = %s",
pdesc->lo,
(regval >> pdesc->lo) & 1,
return 1;
}
- else if ((regno == 4) && (pdesc->lo == 0)) {
+ else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
printf("%2u-%2u = %5u selector = %s",
pdesc->hi, pdesc->lo, sel_bits,
return 1;
}
- else if ((regno == 5) && (pdesc->lo == 0)) {
+ else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
printf("%2u-%2u = %u selector = %s",
pdesc->hi, pdesc->lo, sel_bits,
unsigned int reg = 0;
unsigned short tmp;
- if (miiphy_read (devname, addr, PHY_PHYIDR2, &tmp) != 0) {
+ if (miiphy_read (devname, addr, MII_PHYSID2, &tmp) != 0) {
debug ("PHY ID register 2 read failed\n");
return (-1);
}
reg = tmp;
- debug ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
+ debug ("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
if (reg == 0xFFFF) {
/* No physical device present at this address */
return (-1);
}
- if (miiphy_read (devname, addr, PHY_PHYIDR1, &tmp) != 0) {
+ if (miiphy_read (devname, addr, MII_PHYSID1, &tmp) != 0) {
debug ("PHY ID register 1 read failed\n");
return (-1);
}
unsigned short reg;
int timeout = 500;
- if (miiphy_read (devname, addr, PHY_BMCR, ®) != 0) {
+ if (miiphy_read (devname, addr, MII_BMCR, ®) != 0) {
debug ("PHY status read failed\n");
return (-1);
}
- if (miiphy_write (devname, addr, PHY_BMCR, reg | PHY_BMCR_RESET) != 0) {
+ if (miiphy_write (devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
debug ("PHY reset failed\n");
return (-1);
}
*/
reg = 0x8000;
while (((reg & 0x8000) != 0) && timeout--) {
- if (miiphy_read(devname, addr, PHY_BMCR, ®) != 0) {
+ if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) {
debug("PHY status read failed\n");
return -1;
}
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
- if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
printf ("PHY 1000BT status");
goto miiphy_read_failed;
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
printf ("PHY speed");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if (bmcr & PHY_BMCR_AUTON) {
+ if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
printf ("PHY AN speed");
goto miiphy_read_failed;
}
- return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
+ return (anlpar & LPA_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
- return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
+ return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
miiphy_read_failed:
printf (" read failed, assuming 10BASE-T\n");
/* Check for 1000BASE-X. */
if (miiphy_is_1000base_x (devname, addr)) {
/* 1000BASE-X */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
printf ("1000BASE-X PHY AN duplex");
goto miiphy_read_failed;
}
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
- if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+ if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
printf ("PHY 1000BT status");
goto miiphy_read_failed;
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+ if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
puts ("PHY duplex");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
- if (bmcr & PHY_BMCR_AUTON) {
+ if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+ if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
puts ("PHY AN duplex");
goto miiphy_read_failed;
}
- return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+ return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
FULL : HALF;
}
/* Get speed from basic control settings. */
- return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+ return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
miiphy_read_failed:
printf (" read failed, assuming half duplex\n");
#if defined(CONFIG_PHY_GIGE)
u16 exsr;
- if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+ if (miiphy_read (devname, addr, MII_ESTATUS, &exsr)) {
printf ("PHY extended status read failed, assuming no "
"1000BASE-X\n");
return 0;
}
- return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+ return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
#else
return 0;
#endif
unsigned short reg;
/* dummy read; needed to latch some phys */
- (void)miiphy_read (devname, addr, PHY_BMSR, ®);
- if (miiphy_read (devname, addr, PHY_BMSR, ®)) {
- puts ("PHY_BMSR read failed, assuming no link\n");
+ (void)miiphy_read (devname, addr, MII_BMSR, ®);
+ if (miiphy_read (devname, addr, MII_BMSR, ®)) {
+ puts ("MII_BMSR read failed, assuming no link\n");
return (0);
}
/* Determine if a link is active */
- if ((reg & PHY_BMSR_LS) != 0) {
+ if ((reg & BMSR_LSTATUS) != 0) {
return (1);
} else {
return (0);
}
#endif /* defined(CONFIG_PHY_RESET) */
- miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, reg, MII_BMSR, ®_short);
/*
* Wait if PHY is capable of autonegotiation and autonegotiation is not complete
*/
- if ((reg_short & PHY_BMSR_AUTN_ABLE)
- && !(reg_short & PHY_BMSR_AUTN_COMP)) {
+ if ((reg_short & BMSR_ANEGCAPABLE)
+ && !(reg_short & BMSR_ANEGCOMPLETE)) {
puts ("Waiting for PHY auto negotiation to complete");
i = 0;
- while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
+ while (!(reg_short & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
putc ('.');
}
udelay (1000); /* 1 ms */
- miiphy_read (dev->name, reg, PHY_BMSR, ®_short);
+ miiphy_read (dev->name, reg, MII_BMSR, ®_short);
}
puts (" done\n");
udelay (500000); /* another 500 ms (results in faster booting) */
*/
mii_reg = tse_mdio_read(priv, MIIM_STATUS);
- if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
- && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
+ && !(mii_reg & BMSR_ANEGCOMPLETE)) {
int i = 0;
puts("Waiting for PHY auto negotiation to complete");
- while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
"Unknown/Generic PHY",
32,
(struct phy_cmd[]){ /* config */
- {PHY_BMCR, PHY_BMCR_RESET, NULL},
- {PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL},
+ {MII_BMCR, BMCR_RESET, NULL},
+ {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
{miim_end,}
},
(struct phy_cmd[]){ /* startup */
- {PHY_BMSR, miim_read, NULL},
- {PHY_BMSR, miim_read, &mii_parse_sr},
+ {MII_BMSR, miim_read, NULL},
+ {MII_BMSR, miim_read, &mii_parse_sr},
{miim_end,}
},
(struct phy_cmd[]){ /* shutdown */
#define MIIM_STATUS 0x1
#define MIIM_STATUS_AN_DONE 0x00000020
#define MIIM_STATUS_LINK 0x0004
-#define PHY_BMSR_AUTN_ABLE 0x0008
-#define PHY_BMSR_AUTN_COMP 0x0020
#define MIIM_PHYIR1 0x2
#define MIIM_PHYIR2 0x3
{
u_int16_t dummy;
- return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+ return(davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy));
}
static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
- if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
- tmp |= PHY_BMCR_AUTON;
- davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ tmp |= BMCR_ANENABLE;
+ davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
return(0);
- if (!(tmp & PHY_BMSR_AUTN_COMP))
+ if (!(tmp & BMSR_ANEGCOMPLETE))
return(0);
return(gen_get_link_speed(phy_addr));
return(0);
/* Get PHY ID and initialize phy_ops for a detected PHY */
- if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID1, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
phy_id = (tmp << 16) & 0xffff0000;
- if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID2, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
u16 ctrl, oldctrl;
do {
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- oldctrl = ctrl & PHY_BMCR_AUTON;
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ oldctrl = ctrl & BMCR_ANENABLE;
- ctrl ^= PHY_BMCR_AUTON;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- ctrl &= PHY_BMCR_AUTON;
+ ctrl ^= BMCR_ANENABLE;
+ eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ ctrl &= BMCR_ANENABLE;
if (ctrl == oldctrl) {
phy_addr++;
} else {
- ctrl ^= PHY_BMCR_AUTON;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+ ctrl ^= BMCR_ANENABLE;
+ eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
return phy_addr;
}
int timeout = CONFIG_PHYRESET_TIMEOUT;
u32 phy_addr = priv->address;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+ eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
do {
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- if (!(ctrl & PHY_BMCR_RESET))
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ if (!(ctrl & BMCR_RESET))
break;
udelay(1000);
} while (timeout--);
return -1;
#if defined(CONFIG_DW_AUTONEG)
- bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
- PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
+ BMCR_FULLDPLX | BMCR_SPEED1000;
#else
- bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+ bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
#if defined(CONFIG_DW_SPEED10M)
- bmcr &= ~PHY_BMCR_100MB;
+ bmcr &= ~BMCR_SPEED100;
#endif
#if defined(CONFIG_DW_DUPLEXHALF)
- bmcr &= ~PHY_BMCR_DPLX;
+ bmcr &= ~BMCR_FULLDPLX;
#endif
#endif
- if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+ if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
return -1;
/* Read the phy status register and populate priv structure */
#if defined(CONFIG_DW_AUTONEG)
timeout = CONFIG_AUTONEG_TIMEOUT;
do {
- eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
- if (bmsr & PHY_BMSR_AUTN_COMP)
+ eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
+ if (bmsr & BMSR_ANEGCOMPLETE)
break;
udelay(1000);
} while (timeout--);
- eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
- eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+ eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
+ eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
priv->speed = SPEED_1000M;
else
priv->duplex = HALF_DUPLEX;
} else {
- if (anlpar & PHY_ANLPAR_100)
+ if (anlpar & LPA_100)
priv->speed = SPEED_100M;
else
priv->speed = SPEED_10M;
- if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ if (anlpar & (LPA_10FULL | LPA_100FULL))
priv->duplex = FULL_DUPLEX;
else
priv->duplex = HALF_DUPLEX;
}
#else
- if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+ if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
return -1;
- if (ctrl & PHY_BMCR_DPLX)
+ if (ctrl & BMCR_FULLDPLX)
priv->duplex = FULL_DUPLEX;
else
priv->duplex = HALF_DUPLEX;
- if (ctrl & PHY_BMCR_1000_MBPS)
+ if (ctrl & BMCR_SPEED1000)
priv->speed = SPEED_1000M;
- else if (ctrl & PHY_BMCR_100_MBPS)
+ else if (ctrl & BMCR_SPEED100)
priv->speed = SPEED_100M;
else
priv->speed = SPEED_10M;
}
/* read id2 register */
- if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+ if (get_phyreg(dev, addr, MII_PHYSID2, &value) != 0) {
printf("%s: mii read timeout!\n", devname);
return NULL;
}
* Reset PHY, then delay 300ns
*/
#ifdef CONFIG_MX27
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF);
+ miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_DCOUNTER, 0x00FF);
#endif
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
- PHY_BMCR_RESET);
+ miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+ BMCR_RESET);
udelay(1000);
/*
* Set the auto-negotiation advertisement register bits
*/
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR,
- PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
- PHY_ANLPAR_10 | PHY_ANLPAR_PSB_802_3);
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
- PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_ADVERTISE,
+ LPA_100FULL | LPA_100HALF | LPA_10FULL |
+ LPA_10HALF | PHY_ANLPAR_PSB_802_3);
+ miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART);
return 0;
}
}
if (miiphy_read(dev->name, CONFIG_FEC_MXC_PHYADDR,
- PHY_BMSR, &status)) {
+ MII_BMSR, &status)) {
printf("%s: Autonegotiation failed. status: 0x%04x\n",
dev->name, status);
return -1;
}
- } while (!(status & PHY_BMSR_LS));
+ } while (!(status & BMSR_LSTATUS));
return 0;
}
cbd_t *pTbd, *pUsedTbd;
u16 phyStatus;
- miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
+ miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
/* process all the consumed TBDs */
while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
- (6 << 16)); /* PHY_ANER */
+ (6 << 16)); /* MII_EXPANSION */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
} while (phyReg6 & (1 << 31));
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
- (4 << 16)); /* PHY_ANAR */
+ (4 << 16)); /* MII_ADVERTISE */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
} while (phyReg4 & (1 << 31));
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
- (5 << 16)); /* PHY_ANLPAR */
+ (5 << 16)); /* MII_LPA */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
} while (phyReg5 & (1 << 31));
int j, rc;
u16 phyStatus;
- miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
+ miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
/* section 16.9.23.3
* Wait for ready
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+ phytype = mii_send(mk_mii_read(phyno, MII_PHYSID1));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type\n", phytype, pass);
#endif
phyaddr = phyno;
phytype <<= 16;
phytype |=
- mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+ mii_send(mk_mii_read(phyno, MII_PHYSID2));
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d\n", phyno, pass);
status = 0;
i++;
/* Read PHY control register */
- miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &status);
+ miiphy_read(dev->name, info->phy_addr, MII_BMCR, &status);
/* If phy set to autonegotiate, wait for autonegotiation done,
* if phy is not autonegotiating, just wait for link up.
*/
- if ((status & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
- linkgood = (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS);
+ if ((status & BMCR_ANENABLE) == BMCR_ANENABLE) {
+ linkgood = (BMSR_ANEGCOMPLETE | BMSR_LSTATUS);
} else {
- linkgood = PHY_BMSR_LS;
+ linkgood = BMSR_LSTATUS;
}
/* Read PHY status register */
- miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &status);
+ miiphy_read(dev->name, info->phy_addr, MII_BMSR, &status);
if ((status & linkgood) == linkgood)
break;
ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
/* reset PHY */
- ns7520_mii_write(PHY_BMCR, PHY_BMCR_RESET);
- ns7520_mii_write(PHY_BMCR, 0);
+ ns7520_mii_write(MII_BMCR, BMCR_RESET);
+ ns7520_mii_write(MII_BMCR, 0);
udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */
/* run auto-negotation */
/* define what we are capable of */
- ns7520_mii_write(PHY_ANAR,
- PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD |
- PHY_ANLPAR_10 |
+ ns7520_mii_write(MII_ADVERTISE,
+ LPA_100FULL |
+ LPA_100HALF |
+ LPA_10FULL |
+ LPA_10HALF |
PHY_ANLPAR_PSB_802_3);
/* start auto-negotiation */
- ns7520_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ ns7520_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
/* wait for completion */
ulStartJiffies = get_timer(0);
while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) {
- uiStatus = ns7520_mii_read(PHY_BMSR);
+ uiStatus = ns7520_mii_read(MII_BMSR);
if ((uiStatus &
- (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
- (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
+ (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
+ (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
/* lucky we are, auto-negotiation succeeded */
ns7520_link_print_changed();
ns7520_link_update_egcr();
DEBUG_FN(DEBUG_LINK);
- uiControl = ns7520_mii_read(PHY_BMCR);
+ uiControl = ns7520_mii_read(MII_BMCR);
- if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
- /* PHY_BMSR_LS is only set on autonegotiation */
- uiStatus = ns7520_mii_read(PHY_BMSR);
+ if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
+ /* BMSR_LSTATUS is only set on autonegotiation */
+ uiStatus = ns7520_mii_read(MII_BMSR);
- if (!(uiStatus & PHY_BMSR_LS)) {
+ if (!(uiStatus & BMSR_LSTATUS)) {
printk(KERN_WARNING NS7520_DRIVER_NAME
": link down\n");
/* @TODO Linux: carrier_off */
DEBUG_FN(DEBUG_MII);
- phyDetected = (PhyType) uiID1 = ns7520_mii_read(PHY_PHYIDR1);
+ phyDetected = (PhyType) uiID1 = ns7520_mii_read(MII_PHYSID1);
switch (phyDetected) {
case PHY_LXT971A:
szName = "LXT971A";
- uiID2 = ns7520_mii_read(PHY_PHYIDR2);
+ uiID2 = ns7520_mii_read(MII_PHYSID2);
nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
cRes = 1;
break;
ns9750_mii_get_clock_divisor (nPhyMaxMdioClock);
/* reset PHY */
- ns9750_mii_write(PHY_BMCR, PHY_BMCR_RESET);
- ns9750_mii_write(PHY_BMCR, 0);
+ ns9750_mii_write(MII_BMCR, BMCR_RESET);
+ ns9750_mii_write(MII_BMCR, 0);
/* @TODO check time */
udelay (3000); /* [2] p.70 says at least 300us reset recovery time. But
DEBUG_FN (DEBUG_LINK);
- uiControl = ns9750_mii_read(PHY_BMCR);
- uiControl &= ~(PHY_BMCR_SPEED_MASK |
- PHY_BMCR_AUTON | PHY_BMCR_DPLX);
+ uiControl = ns9750_mii_read(MII_BMCR);
+ uiControl &= ~(BMCR_SPEED1000 | BMCR_SPEED100 |
+ BMCR_ANENABLE | BMCR_FULLDPLX);
uiLastLinkStatus = 0;
if ((ucLinkMode & FS_EEPROM_AUTONEG_SPEED_MASK) ==
FS_EEPROM_AUTONEG_SPEED_100) {
- uiControl |= PHY_BMCR_100MB;
+ uiControl |= BMCR_SPEED100;
uiLastLinkStatus |= PHY_LXT971_STAT2_100BTX;
- } else
- uiControl |= PHY_BMCR_10_MBPS;
+ }
if ((ucLinkMode & FS_EEPROM_AUTONEG_DUPLEX_MASK) ==
FS_EEPROM_AUTONEG_DUPLEX_FULL) {
- uiControl |= PHY_BMCR_DPLX;
+ uiControl |= BMCR_FULLDPLX;
uiLastLinkStatus |= PHY_LXT971_STAT2_DUPLEX_MODE;
}
- ns9750_mii_write(PHY_BMCR, uiControl);
+ ns9750_mii_write(MII_BMCR, uiControl);
ns9750_link_print_changed ();
ns9750_link_update_egcr ();
/* run auto-negotation */
/* define what we are capable of */
- ns9750_mii_write(PHY_ANAR,
- PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD |
- PHY_ANLPAR_10 |
+ ns9750_mii_write(MII_ADVERTISE,
+ LPA_100FULL |
+ LPA_100HALF |
+ LPA_10FULL |
+ LPA_10HALF |
PHY_ANLPAR_PSB_802_3);
/* start auto-negotiation */
- ns9750_mii_write(PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ ns9750_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
/* wait for completion */
ulStartJiffies = get_ticks ();
while (get_ticks () < ulStartJiffies + NS9750_MII_NEG_DELAY) {
- uiStatus = ns9750_mii_read(PHY_BMSR);
+ uiStatus = ns9750_mii_read(MII_BMSR);
if ((uiStatus &
- (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) ==
- (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)) {
+ (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
+ (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
/* lucky we are, auto-negotiation succeeded */
ns9750_link_print_changed ();
ns9750_link_update_egcr ();
DEBUG_FN (DEBUG_LINK);
- uiControl = ns9750_mii_read(PHY_BMCR);
+ uiControl = ns9750_mii_read(MII_BMCR);
- if ((uiControl & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
- /* PHY_BMSR_LS is only set on autonegotiation */
- uiStatus = ns9750_mii_read(PHY_BMSR);
+ if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
+ /* BMSR_LSTATUS is only set on autonegotiation */
+ uiStatus = ns9750_mii_read(MII_BMSR);
- if (!(uiStatus & PHY_BMSR_LS)) {
+ if (!(uiStatus & BMSR_LSTATUS)) {
printk (KERN_WARNING NS9750_DRIVER_NAME
": link down\n");
/* @TODO Linux: carrier_off */
DEBUG_FN (DEBUG_MII);
- phyDetected = (PhyType) uiID1 = ns9750_mii_read(PHY_PHYIDR1);
+ phyDetected = (PhyType) uiID1 = ns9750_mii_read(MII_PHYSID1);
switch (phyDetected) {
case PHY_LXT971A:
szName = "LXT971A";
- uiID2 = ns9750_mii_read(PHY_PHYIDR2);
+ uiID2 = ns9750_mii_read(MII_PHYSID2);
nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
cRes = 1;
break;
printf("Invalid cpu port config, using default port5\n");
}
- RD_PHY(name, MV88E61XX_PRT_OFST, PHY_PHYIDR2, ®);
+ RD_PHY(name, MV88E61XX_PRT_OFST, MII_PHYSID2, ®);
switch (reg &= 0xfff0) {
case 0x1610:
idstr = "88E6161";
smc911x_phy_reset(dev);
- smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_RESET);
+ smc911x_miiphy_write(dev, 1, MII_BMCR, BMCR_RESET);
mdelay(1);
- smc911x_miiphy_write(dev, 1, PHY_ANAR, 0x01e1);
- smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_AUTON |
- PHY_BMCR_RST_NEG);
+ smc911x_miiphy_write(dev, 1, MII_ADVERTISE, 0x01e1);
+ smc911x_miiphy_write(dev, 1, MII_BMCR, BMCR_ANENABLE |
+ BMCR_ANRESTART);
timeout = 5000;
do {
if ((timeout--) == 0)
goto err_out;
- if (smc911x_miiphy_read(dev, 1, PHY_BMSR, &status) != 0)
+ if (smc911x_miiphy_read(dev, 1, MII_BMSR, &status) != 0)
goto err_out;
- } while (!(status & PHY_BMSR_LS));
+ } while (!(status & BMSR_LSTATUS));
printf(DRIVERNAME ": phy initialized\n");
* (ie - we're capable and it's not done)
*/
mii_reg = read_phy_reg(priv, MIIM_STATUS);
- if ((mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
int i = 0;
puts("Waiting for PHY auto negotiation to complete");
- while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
{
/* We're using autonegotiation */
- if (mii_reg & PHY_BMSR_AUTN_ABLE) {
+ if (mii_reg & BMSR_ANEGCAPABLE) {
uint lpa = 0;
uint gblpa = 0;
/* Check for gigabit capability */
- if (mii_reg & PHY_BMSR_EXT) {
+ if (mii_reg & BMSR_ERCAP) {
/* We want a list of states supported by
* both PHYs in the link
*/
- gblpa = read_phy_reg(priv, PHY_1000BTSR);
- gblpa &= read_phy_reg(priv, PHY_1000BTCR) << 2;
+ gblpa = read_phy_reg(priv, MII_STAT1000);
+ gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2;
}
/* Set the baseline so we only have to set them
return 0;
}
- lpa = read_phy_reg(priv, PHY_ANAR);
- lpa &= read_phy_reg(priv, PHY_ANLPAR);
+ lpa = read_phy_reg(priv, MII_ADVERTISE);
+ lpa &= read_phy_reg(priv, MII_LPA);
- if (lpa & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) {
+ if (lpa & (LPA_100FULL | LPA_100HALF)) {
priv->speed = 100;
- if (lpa & PHY_ANLPAR_TXFD)
+ if (lpa & LPA_100FULL)
priv->duplexity = 1;
- } else if (lpa & PHY_ANLPAR_10FD)
+ } else if (lpa & LPA_10FULL)
priv->duplexity = 1;
} else {
- uint bmcr = read_phy_reg(priv, PHY_BMCR);
+ uint bmcr = read_phy_reg(priv, MII_BMCR);
priv->speed = 10;
priv->duplexity = 0;
- if (bmcr & PHY_BMCR_DPLX)
+ if (bmcr & BMCR_FULLDPLX)
priv->duplexity = 1;
- if (bmcr & PHY_BMCR_1000_MBPS)
+ if (bmcr & BMCR_SPEED1000)
priv->speed = 1000;
- else if (bmcr & PHY_BMCR_100_MBPS)
+ else if (bmcr & BMCR_SPEED100)
priv->speed = 100;
}
"Micrel KSZ804 PHY",
4,
(struct phy_cmd[]) { /* config */
- {PHY_BMCR, PHY_BMCR_RESET, NULL},
- {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {MII_BMCR, BMCR_RESET, NULL},
+ {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
{miim_end,}
},
(struct phy_cmd[]) { /* startup */
- {PHY_BMSR, miim_read, NULL},
- {PHY_BMSR, miim_read, &mii_parse_sr},
- {PHY_BMSR, miim_read, &mii_parse_link},
+ {MII_BMSR, miim_read, NULL},
+ {MII_BMSR, miim_read, &mii_parse_sr},
+ {MII_BMSR, miim_read, &mii_parse_link},
{miim_end,}
},
(struct phy_cmd[]) { /* shutdown */
"Unknown/Generic PHY",
32,
(struct phy_cmd[]) { /* config */
- {PHY_BMCR, PHY_BMCR_RESET, NULL},
- {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {MII_BMCR, BMCR_RESET, NULL},
+ {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
{miim_end,}
},
(struct phy_cmd[]) { /* startup */
- {PHY_BMSR, miim_read, NULL},
- {PHY_BMSR, miim_read, &mii_parse_sr},
- {PHY_BMSR, miim_read, &mii_parse_link},
+ {MII_BMSR, miim_read, NULL},
+ {MII_BMSR, miim_read, &mii_parse_sr},
+ {MII_BMSR, miim_read, &mii_parse_link},
{miim_end,}
},
(struct phy_cmd[]) { /* shutdown */
advertise = mii_info->advertising;
/* Setup standard advertisement */
- adv = phy_read (mii_info, PHY_ANAR);
+ adv = phy_read (mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
- phy_write (mii_info, PHY_ANAR, adv);
+ phy_write (mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced (struct uec_mii_info *mii_info)
u16 ctrl;
u32 features = mii_info->phyinfo->features;
- ctrl = phy_read (mii_info, PHY_BMCR);
+ ctrl = phy_read (mii_info, MII_BMCR);
- ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS |
- PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON);
- ctrl |= PHY_BMCR_RESET;
+ ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
+ BMCR_SPEED1000 | BMCR_ANENABLE);
+ ctrl |= BMCR_RESET;
switch (mii_info->speed) {
case SPEED_1000:
if (features & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
- ctrl |= PHY_BMCR_1000_MBPS;
+ ctrl |= BMCR_SPEED1000;
break;
}
mii_info->speed = SPEED_100;
case SPEED_100:
if (features & (SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full)) {
- ctrl |= PHY_BMCR_100_MBPS;
+ ctrl |= BMCR_SPEED100;
break;
}
mii_info->speed = SPEED_10;
break;
}
- phy_write (mii_info, PHY_BMCR, ctrl);
+ phy_write (mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
{
u16 ctl;
- ctl = phy_read (mii_info, PHY_BMCR);
- ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- phy_write (mii_info, PHY_BMCR, ctl);
+ ctl = phy_read (mii_info, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write (mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg (struct uec_mii_info *mii_info)
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
- phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET);
+ phy_write (mii_info, MII_BMCR, BMCR_RESET);
phy_write (mii_info, 0x1d, 0x1f);
phy_write (mii_info, 0x1e, 0x200c);
u16 status;
/* Status is read once to clear old link state */
- phy_read (mii_info, PHY_BMSR);
+ phy_read (mii_info, MII_BMSR);
/*
* Wait if the link is up, and autonegotiation is in progress
* (ie - we're capable and it's not done)
*/
- status = phy_read(mii_info, PHY_BMSR);
- if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE)
- && !(status & PHY_BMSR_AUTN_COMP)) {
+ status = phy_read(mii_info, MII_BMSR);
+ if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
+ && !(status & BMSR_ANEGCOMPLETE)) {
int i = 0;
- while (!(status & PHY_BMSR_AUTN_COMP)) {
+ while (!(status & BMSR_ANEGCOMPLETE)) {
/*
* Timeout reached ?
*/
i++;
udelay(1000); /* 1 ms */
- status = phy_read(mii_info, PHY_BMSR);
+ status = phy_read(mii_info, MII_BMSR);
}
mii_info->link = 1;
} else {
- if (status & PHY_BMSR_LS)
+ if (status & BMSR_LSTATUS)
mii_info->link = 1;
else
mii_info->link = 0;
else
mii_info->duplex = DUPLEX_HALF;
} else {
- status = phy_read(mii_info, PHY_ANLPAR);
+ status = phy_read(mii_info, MII_LPA);
- if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
- if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ if (status & (LPA_100FULL | LPA_100HALF))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
/* Wait for aneg to complete. */
do
- val = phy_read(mii_info, PHY_BMSR);
- while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
+ val = phy_read(mii_info, MII_BMSR);
+ while (--cnt && !(val & BMSR_ANEGCOMPLETE));
/* Set RDX clk delay. */
phy_write(mii_info, 0x18, 0x7 | (7 << 12));
temp |= MII_M1111_HWCFG_MODE_RGMII;
phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
- phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+ phy_write(mii_info, MII_BMCR, BMCR_RESET);
}
return 0;
static int dm9161_init (struct uec_mii_info *mii_info)
{
/* Reset the PHY */
- phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) |
- PHY_BMCR_RESET);
+ phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+ BMCR_RESET);
/* PHY and MAC connect */
- phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
- ~PHY_BMCR_ISO);
+ phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+ ~BMCR_ISOLATE);
phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
struct phy_info *theInfo = NULL;
/* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read (mii_info, PHY_PHYIDR1);
+ phy_reg = phy_read (mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read (mii_info, PHY_PHYIDR2);
+ phy_reg = phy_read (mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
/* handle 88e1111 rev.B2 erratum 5.6 */
if (mii_info->autoneg) {
- status = phy_read (mii_info, PHY_BMCR);
- phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);
+ status = phy_read (mii_info, MII_BMCR);
+ phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
}
/* now the B2 will correctly report autoneg completion status */
}
#define ADVERTISED_BNC (1 << 11)
#define ADVERTISED_10000baseT_Full (1 << 12)
-/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_RESV 0x1c00 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
-
/* Taken from mii_if_info and sungem_phy.h */
struct uec_mii_info {
/* Information about the PHY type */
#ifndef _miiphy_h_
#define _miiphy_h_
+#include <linux/mii.h>
#include <net.h>
int miiphy_read (const char *devname, unsigned char addr, unsigned char reg,
#define FULL 44
/* phy register offsets */
-#define PHY_BMCR 0x00
-#define PHY_BMSR 0x01
-#define PHY_PHYIDR1 0x02
-#define PHY_PHYIDR2 0x03
-#define PHY_ANAR 0x04
-#define PHY_ANLPAR 0x05
-#define PHY_ANER 0x06
-#define PHY_ANNPTR 0x07
-#define PHY_ANLPNP 0x08
-#define PHY_1000BTCR 0x09
-#define PHY_1000BTSR 0x0A
-#define PHY_EXSR 0x0F
-#define PHY_PHYSTS 0x10
-#define PHY_MIPSCR 0x11
-#define PHY_MIPGSR 0x12
-#define PHY_DCR 0x13
-#define PHY_FCSCR 0x14
-#define PHY_RECR 0x15
-#define PHY_PCSR 0x16
-#define PHY_LBR 0x17
-#define PHY_10BTSCR 0x18
-#define PHY_PHYCTRL 0x19
-
-/* PHY BMCR */
-#define PHY_BMCR_RESET 0x8000
-#define PHY_BMCR_LOOP 0x4000
-#define PHY_BMCR_100MB 0x2000
-#define PHY_BMCR_AUTON 0x1000
-#define PHY_BMCR_POWD 0x0800
-#define PHY_BMCR_ISO 0x0400
-#define PHY_BMCR_RST_NEG 0x0200
-#define PHY_BMCR_DPLX 0x0100
-#define PHY_BMCR_COL_TST 0x0080
-
-#define PHY_BMCR_SPEED_MASK 0x2040
-#define PHY_BMCR_1000_MBPS 0x0040
-#define PHY_BMCR_100_MBPS 0x2000
-#define PHY_BMCR_10_MBPS 0x0000
-
-/* phy BMSR */
-#define PHY_BMSR_100T4 0x8000
-#define PHY_BMSR_100TXF 0x4000
-#define PHY_BMSR_100TXH 0x2000
-#define PHY_BMSR_10TF 0x1000
-#define PHY_BMSR_10TH 0x0800
-#define PHY_BMSR_EXT_STAT 0x0100
-#define PHY_BMSR_PRE_SUP 0x0040
-#define PHY_BMSR_AUTN_COMP 0x0020
-#define PHY_BMSR_RF 0x0010
-#define PHY_BMSR_AUTN_ABLE 0x0008
-#define PHY_BMSR_LS 0x0004
-#define PHY_BMSR_JD 0x0002
-#define PHY_BMSR_EXT 0x0001
-
-/*phy ANLPAR */
-#define PHY_ANLPAR_NP 0x8000
-#define PHY_ANLPAR_ACK 0x4000
-#define PHY_ANLPAR_RF 0x2000
-#define PHY_ANLPAR_ASYMP 0x0800
-#define PHY_ANLPAR_PAUSE 0x0400
-#define PHY_ANLPAR_T4 0x0200
-#define PHY_ANLPAR_TXFD 0x0100
-#define PHY_ANLPAR_TX 0x0080
-#define PHY_ANLPAR_10FD 0x0040
-#define PHY_ANLPAR_10 0x0020
-#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
-/* phy ANLPAR 1000BASE-X */
-#define PHY_X_ANLPAR_NP 0x8000
-#define PHY_X_ANLPAR_ACK 0x4000
-#define PHY_X_ANLPAR_RF_MASK 0x3000
-#define PHY_X_ANLPAR_PAUSE_MASK 0x0180
-#define PHY_X_ANLPAR_HD 0x0040
-#define PHY_X_ANLPAR_FD 0x0020
-
-#define PHY_ANLPAR_PSB_MASK 0x001f
+#define MII_MIPSCR 0x11
+
+/* MII_LPA */
#define PHY_ANLPAR_PSB_802_3 0x0001
#define PHY_ANLPAR_PSB_802_9 0x0002
-/* phy 1000BTCR */
+/* MII_CTRL1000 masks */
#define PHY_1000BTCR_1000FD 0x0200
#define PHY_1000BTCR_1000HD 0x0100
-/* phy 1000BTSR */
+/* MII_STAT1000 masks */
#define PHY_1000BTSR_MSCF 0x8000
#define PHY_1000BTSR_MSCR 0x4000
#define PHY_1000BTSR_LRS 0x2000
#define PHY_1000BTSR_1000HD 0x0400
/* phy EXSR */
-#define PHY_EXSR_1000XF 0x8000
-#define PHY_EXSR_1000XH 0x4000
-#define PHY_EXSR_1000TF 0x2000
-#define PHY_EXSR_1000TH 0x1000
+#define ESTATUS_1000XF 0x8000
+#define ESTATUS_1000XH 0x4000
#endif
#define MIIM_STATUS 0x1
#define MIIM_STATUS_AN_DONE 0x00000020
#define MIIM_STATUS_LINK 0x0004
-#define PHY_BMSR_AUTN_ABLE 0x0008
-#define PHY_BMSR_AUTN_COMP 0x0020
#define MIIM_PHYIR1 0x2
#define MIIM_PHYIR2 0x3
projects / oweals / u-boot.git / commitdiff