===========
The exact build target you need will depend on the board you have. For
Logic PD boards, or other boards which store the ethernet MAC address at
-the end of SPI flash, run 'make da850evm'. For boards which store the
-ethernet MAC address in the i2c EEPROM located at 0x50, run
-'make da850_am18xxevm'. Once this build completes you will have a
+the end of SPI flash, run 'make da850evm'. Once this build completes you will have a
u-boot.ais file that needs to be written to the correct persistent
storage.
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_SYS_TEXT_BASE=0xc1080000
-CONFIG_TARGET_DA850EVM=y
-CONFIG_MAC_ADDR_IN_EEPROM=y
-CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x800
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50"
-CONFIG_BOOTDELAY=3
-CONFIG_MISC_INIT_R=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot > "
-CONFIG_CRC32_VERIFY=y
-# CONFIG_CMD_EEPROM is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_GPIO is not set
-# CONFIG_CMD_GPT is not set
-# CONFIG_CMD_PART is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_TIME is not set
-# CONFIG_CMD_EXT4 is not set
-# CONFIG_CMD_FS_GENERIC is not set
-CONFIG_CMD_DIAG=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
-CONFIG_SPL_OF_PLATDATA=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_DA8XX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_DM_I2C_COMPAT=y
-CONFIG_SYS_I2C_DAVINCI=y
-CONFIG_MTD_DEVICE=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_DAVINCI_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_DA8XX=y
-CONFIG_USB_STORAGE=y
-# CONFIG_FAT_WRITE is not set