omap3_dss: cosmetic changes
authorJeroen Hofstee <jhofstee@victronenergy.com>
Fri, 18 May 2012 00:51:01 +0000 (00:51 +0000)
committerAnatolij Gustschin <agust@denx.de>
Fri, 25 May 2012 13:35:25 +0000 (15:35 +0200)
Remove unnecessary brackets.
Unwrap lines which are below 80 chars.
Single line comment as single line (as the rest).
Moved init values to the source code.

cc: s-paulraj@ti.com
cc: khasim@ti.com
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
arch/arm/include/asm/arch-omap3/dss.h
drivers/video/omap3_dss.c

index 101e8c8e29564261c3022b93ebb93cd5192006a5..a830c43de208355b41b0ca5356ba82414762643e 100644 (file)
@@ -28,9 +28,7 @@
 #ifndef DSS_H
 #define DSS_H
 
-/*
- * DSS Base Registers
- */
+/* DSS Base Registers */
 #define OMAP3_DSS_BASE         0x48050000
 #define OMAP3_DISPC_BASE       0x48050400
 #define OMAP3_VENC_BASE                0x48050C00
@@ -163,26 +161,14 @@ struct venc_regs {
 #define GP_OUT0                                        (1 << 15)
 #define GP_OUT1                                        (1 << 16)
 
-#define DISPC_ENABLE                           (LCD_ENABLE | \
-                                                DIG_ENABLE | \
-                                                GO_LCD | \
-                                                GO_DIG | \
-                                                GP_OUT0| \
-                                                GP_OUT1)
-
 /* Configure VENC DSS Params */
 #define VENC_CLK_ENABLE                                (1 << 3)
 #define DAC_DEMEN                              (1 << 4)
 #define DAC_POWERDN                            (1 << 5)
 #define VENC_OUT_SEL                           (1 << 6)
 #define DIG_LPP_SHIFT                          16
-#define VENC_DSS_CONFIG                                (VENC_CLK_ENABLE | \
-                                                DAC_DEMEN | \
-                                                DAC_POWERDN | \
-                                                VENC_OUT_SEL)
-/*
- * Panel Configuration
- */
+
+/* Panel Configuration */
 struct panel_config {
        u32 timing_h;
        u32 timing_v;
@@ -196,9 +182,7 @@ struct panel_config {
        void *frame_buffer;
 };
 
-/*
- * Generic DSS Functions
- */
+/* Generic DSS Functions */
 void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
                        u32 height, u32 width);
 void omap3_dss_panel_config(const struct panel_config *panel_cfg);
index dfe61b348c74062747c7d65f9175419ab4dbaf2b..6686718b0a793306d77862a672e7cf731f8b8cd9 100644 (file)
@@ -30,9 +30,7 @@
 #include <asm/arch/dss.h>
 #include <video_fb.h>
 
-/*
- * Configure VENC for a given Mode (NTSC / PAL)
- */
+/* Configure VENC for a given Mode (NTSC / PAL) */
 void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
                                u32 height, u32 width)
 {
@@ -65,10 +63,8 @@ void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
        writel(venc_cfg->savid__eavid, &venc->savid__eavid);
        writel(venc_cfg->flen__fal, &venc->flen__fal);
        writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
-       writel(venc_cfg->hs_int_start_stop_x,
-                               &venc->hs_int_start_stop_x);
-       writel(venc_cfg->hs_ext_start_stop_x,
-                               &venc->hs_ext_start_stop_x);
+       writel(venc_cfg->hs_int_start_stop_x, &venc->hs_int_start_stop_x);
+       writel(venc_cfg->hs_ext_start_stop_x, &venc->hs_ext_start_stop_x);
        writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
        writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
                        &venc->vs_int_stop_x__vs_int_start_y);
@@ -94,15 +90,14 @@ void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
        writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
 
        /* Configure DSS for VENC Settings */
-       writel(VENC_DSS_CONFIG, &dss->control);
+       writel(VENC_CLK_ENABLE | DAC_DEMEN | DAC_POWERDN | VENC_OUT_SEL,
+                       &dss->control);
 
        /* Configure height and width for Digital out */
-       writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
+       writel(height << DIG_LPP_SHIFT | width, &dispc->size_dig);
 }
 
-/*
- * Configure Panel Specific Parameters
- */
+/* Configure Panel Specific Parameters */
 void omap3_dss_panel_config(const struct panel_config *panel_cfg)
 {
        struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
@@ -117,9 +112,9 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg)
        writel(panel_cfg->pol_freq, &dispc->pol_freq);
        writel(panel_cfg->divisor, &dispc->divisor);
        writel(panel_cfg->lcd_size, &dispc->size_lcd);
-       writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
-       writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
-               (panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
+       writel(panel_cfg->load_mode << FRAME_MODE_SHIFT, &dispc->config);
+       writel(panel_cfg->panel_type << TFTSTN_SHIFT |
+               panel_cfg->data_lines << DATALINES_SHIFT, &dispc->control);
        writel(panel_cfg->panel_color, &dispc->default_color0);
        writel((u32) panel_cfg->frame_buffer, &dispc->gfx_ba0);
 
@@ -133,16 +128,14 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg)
        writel(panel_cfg->lcd_size, &dispc->gfx_size);
 }
 
-/*
- * Enable LCD and DIGITAL OUT in DSS
- */
+/* Enable LCD and DIGITAL OUT in DSS */
 void omap3_dss_enable(void)
 {
        struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-       u32 l = 0;
+       u32 l;
 
        l = readl(&dispc->control);
-       l |= DISPC_ENABLE;
+       l |= LCD_ENABLE | GO_LCD | DIG_ENABLE | GO_DIG | GP_OUT0 | GP_OUT1;
        writel(l, &dispc->control);
 }