switch the am335x-evmsk to the new wlcore bindings

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39948

diff --git a/target/linux/omap/patches-3.12/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-3.12/950-am335x-evmsk-wilink-dts.patch
index 00fd0b2c2de420da3307533da1401a3c282e17a0..933c059281751c9ae62f52586e917edfc4b0e65b 100644 (file)
--- a/target/linux/omap/patches-3.12/950-am335x-evmsk-wilink-dts.patch
+++ b/target/linux/omap/patches-3.12/950-am335x-evmsk-wilink-dts.patch
@@ -8,7 +8,7 @@
  #include <dt-bindings/pwm/pwm.h>
  
  / {
-@@ -200,6 +201,33 @@
+@@ -200,6 +201,26 @@
                                0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
                        >;
                };
@@ -28,21 +28,14 @@
 +      };
 +      
 +      wlan {
-+              compatible = "ti,wilink6";
-+              interrupt-parent = <&gpio0>;
-+              interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-+              clocks = <&refclock>;
-+              clock-names = "refclock";
++              compatible = "wlcore";
++              gpio = <31>;
 +
-+              refclock: refclock {
-+                      compatible = "ti,wilink-clock";
-+                      #clock-cells = <0>;
-+                      clock-frequency = <38400000>;
-+              };
++              board-ref-clock = <4>;
        };
  
        ocp {
-@@ -335,6 +363,16 @@
+@@ -335,6 +356,16 @@
                regulator-boot-on;
        };
  
@@ -59,7 +52,7 @@
        leds {
                pinctrl-names = "default";
                pinctrl-0 = <&user_leds_s0>;
-@@ -535,6 +573,16 @@
+@@ -535,6 +566,16 @@
        status = "okay";
  };
  

diff --git a/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch
index f52773ca25e68f250dbc054e563b8f50edb6a51d..7ebbbeaec3fb7436df40395c2677223612fc0d82 100644 (file)
--- a/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch
+++ b/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch
@@ -8,28 +8,21 @@
  #include <dt-bindings/pwm/pwm.h>
  
  / {
-@@ -26,6 +27,20 @@
+@@ -26,6 +27,13 @@
                };
        };
  
 +      wlan {
-+              compatible = "ti,wilink6";
-+              interrupt-parent = <&gpio0>;
-+              interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-+              clocks = <&refclock>;
-+              clock-names = "refclock";
++              compatible = "wlcore";
 +
-+              refclock: refclock {
-+                      compatible = "ti,wilink-clock";
-+                      #clock-cells = <0>;
-+                      clock-frequency = <38400000>;
-+              };
++              gpio = <31>;
++              board-ref-clock = <4>;
 +      };
 +
        memory {
                device_type = "memory";
                reg = <0x80000000 0x10000000>; /* 256 MB */
-@@ -45,6 +60,16 @@
+@@ -45,6 +53,16 @@
                regulator-boot-on;
        };
  
@@ -46,7 +39,7 @@
        leds {
                pinctrl-names = "default";
                pinctrl-0 = <&user_leds_s0>;
-@@ -297,6 +322,20 @@
+@@ -297,6 +315,20 @@
                        0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
                >;
        };
@@ -67,7 +60,7 @@
  };
  
  &uart0 {
-@@ -503,6 +542,16 @@
+@@ -503,6 +535,16 @@
        ti,no-reset-on-init;
  };