--- /dev/null
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# April 2010
+#
+# The module implements "4-bit" GCM GHASH function and underlying
+# single multiplication operation in GF(2^128). "4-bit" means that it
+# uses 256 bytes per-key table [+32 bytes shared table]. There is no
+# experimental performance data available yet. The only approximation
+# that can be made at this point is based on code size. Inner loop is
+# 32 instructions long and on single-issue core should execute in <40
+# cycles. Having verified that gcc 3.4 didn't unroll corresponding
+# loop, this assembler loop body was found to be ~3x smaller than
+# compiler-generated one...
+#
+# Byte order [in]dependence. =========================================
+#
+# Caller is expected to maintain specific *dword* order in Htable,
+# namely with *least* significant dword of 128-bit value at *lower*
+# address. This differs completely from C code and has everything to
+# do with ldm instruction and order in which dwords are "consumed" by
+# algorithm. *Byte* order within these dwords in turn is whatever
+# *native* byte order on current platform. See gcm128.c for working
+# example...
+
+$Xi="r0"; # argument block
+$Htbl="r1";
+$inp="r2";
+$len="r3";
+$Zll="r4"; # variables
+$Zlh="r5";
+$Zhl="r6";
+$Zhh="r7";
+$Tll="r8";
+$Tlh="r9";
+$Thl="r10";
+$Thh="r11";
+$nlo="r12";
+################# r13 is stack pointer
+$nhi="r14";
+################# r15 is program counter
+
+$rem_4bit=$inp; # used in gcm_gmult_4bit
+$cnt=$len;
+
+$output=shift;
+open STDOUT,">$output";
+
+sub Zsmash() {
+ my $i=12;
+ my @args=@_;
+ for ($Zll,$Zlh,$Zhl,$Zhh) {
+ # can be reduced to single "str $_,[$Xi,$i]" on big-endian platforms
+ $code.=<<___;
+ mov $Tlh,$_,lsr#8
+ strb $_,[$Xi,#$i+3]
+ mov $Thl,$_,lsr#16
+ strb $Tlh,[$Xi,#$i+2]
+ mov $Thh,$_,lsr#24
+ strb $Thl,[$Xi,#$i+1]
+ strb $Thh,[$Xi,#$i]
+___
+ $code.="\t".shift(@args)."\n";
+ $i-=4;
+ }
+}
+
+$code=<<___;
+.text
+.code 32
+
+.type rem_4bit,%object
+.align 5
+rem_4bit:
+.short 0x0000,0x1C20,0x3840,0x2460
+.short 0x7080,0x6CA0,0x48C0,0x54E0
+.short 0xE100,0xFD20,0xD940,0xC560
+.short 0x9180,0x8DA0,0xA9C0,0xB5E0
+.size rem_4bit,.-rem_4bit
+
+.type rem_4bit_get,%function
+rem_4bit_get:
+ sub $rem_4bit,pc,#8
+ sub $rem_4bit,$rem_4bit,#32 @ &rem_4bit
+ b .Lrem_4bit_got
+ nop
+.size rem_4bit_get,.-rem_4bit_get
+
+.global gcm_ghash_4bit
+.type gcm_ghash_4bit,%function
+gcm_ghash_4bit:
+ sub r12,pc,#8
+ add $len,$inp,$len @ $len to point at the end
+ stmdb sp!,{r3-r11,lr} @ save $len/end too
+ sub r12,r12,#48 @ &rem_4bit
+
+ ldmia r12,{r4-r11} @ copy rem_4bit ...
+ stmdb sp!,{r4-r11} @ ... to stack
+
+ ldrb $nlo,[$inp,#15]
+ ldrb $nhi,[$Xi,#15]
+.Louter:
+ eor $nlo,$nlo,$nhi
+ and $nhi,$nlo,#0xf0
+ and $nlo,$nlo,#0x0f
+ mov $cnt,#14
+
+ add $Zhh,$Htbl,$nlo,lsl#4
+ ldmia $Zhh,{$Zll-$Zhh} @ load Htbl[nlo]
+ ldrb $nlo,[$inp,#14]
+
+ add $Thh,$Htbl,$nhi
+ and $nhi,$Zll,#0xf @ rem
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nhi]
+ mov $nhi,$nhi,lsl#1
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[sp,$nhi] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ ldrb $nhi,[$Xi,#14]
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ eor $nlo,$nlo,$nhi
+ eor $Zhh,$Zhh,$Tll,lsl#16
+ and $nhi,$nlo,#0xf0
+ and $nlo,$nlo,#0x0f
+
+.Loop:
+ add $Thh,$Htbl,$nlo,lsl#4
+ subs $cnt,$cnt,#1
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nlo]
+ and $nlo,$Zll,#0xf @ rem
+ add $nlo,$nlo,$nlo
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[sp,$nlo] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ ldrplb $nlo,[$inp,$cnt]
+
+ add $Thh,$Htbl,$nhi
+ eor $Zhh,$Zhh,$Tll,lsl#16 @ ^= rem_4bit[rem]
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nhi]
+ and $nhi,$Zll,#0xf @ rem
+ add $nhi,$nhi,$nhi
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[sp,$nhi] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ ldrplb $nhi,[$Xi,$cnt]
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ eorpl $nlo,$nlo,$nhi
+ eor $Zhh,$Zhh,$Tll,lsl#16 @ ^= rem_4bit[rem]
+ andpl $nhi,$nlo,#0xf0
+ andpl $nlo,$nlo,#0x0f
+ bpl .Loop
+
+ ldr $len,[sp,#32] @ re-load $len/end
+ add $inp,$inp,#16
+ mov $nhi,$Zll
+___
+ &Zsmash("cmp\t$inp,$len","ldrneb\t$nlo,[$inp,#15]");
+$code.=<<___;
+ bne .Louter
+
+ add sp,sp,#36
+ ldmia sp!,{r4-r11,lr}
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ bx lr @ interoperable with Thumb ISA:-)
+.size gcm_ghash_4bit,.-gcm_ghash_4bit
+
+.global gcm_gmult_4bit
+.type gcm_gmult_4bit,%function
+gcm_gmult_4bit:
+ stmdb sp!,{r4-r11,lr}
+ ldrb $nlo,[$Xi,#15]
+ b rem_4bit_get
+.Lrem_4bit_got:
+ and $nhi,$nlo,#0xf0
+ and $nlo,$nlo,#0x0f
+ mov $cnt,#14
+
+ add $Zhh,$Htbl,$nlo,lsl#4
+ ldmia $Zhh,{$Zll-$Zhh} @ load Htbl[nlo]
+ ldrb $nlo,[$Xi,#14]
+
+ add $Thh,$Htbl,$nhi
+ and $nhi,$Zll,#0xf @ rem
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nhi]
+ mov $nhi,$nhi,lsl#1
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[$rem_4bit,$nhi] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ and $nhi,$nlo,#0xf0
+ eor $Zhh,$Zhh,$Tll,lsl#16
+ and $nlo,$nlo,#0x0f
+
+.Loop2:
+ add $Thh,$Htbl,$nlo,lsl#4
+ subs $cnt,$cnt,#1
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nlo]
+ and $nlo,$Zll,#0xf @ rem
+ add $nlo,$nlo,$nlo
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[$rem_4bit,$nlo] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ ldrplb $nlo,[$Xi,$cnt]
+
+ add $Thh,$Htbl,$nhi
+ eor $Zhh,$Zhh,$Tll,lsl#16 @ ^= rem_4bit[rem]
+ ldmia $Thh,{$Tll-$Thh} @ load Htbl[nhi]
+ and $nhi,$Zll,#0xf @ rem
+ add $nhi,$nhi,$nhi
+ eor $Zll,$Tll,$Zll,lsr#4
+ ldrh $Tll,[$rem_4bit,$nhi] @ rem_4bit[rem]
+ eor $Zll,$Zll,$Zlh,lsl#28
+ eor $Zlh,$Tlh,$Zlh,lsr#4
+ eor $Zlh,$Zlh,$Zhl,lsl#28
+ eor $Zhl,$Thl,$Zhl,lsr#4
+ eor $Zhl,$Zhl,$Zhh,lsl#28
+ eor $Zhh,$Thh,$Zhh,lsr#4
+ andpl $nhi,$nlo,#0xf0
+ eor $Zhh,$Zhh,$Tll,lsl#16 @ ^= rem_4bit[rem]
+ andpl $nlo,$nlo,#0x0f
+ bpl .Loop2
+___
+ &Zsmash();
+$code.=<<___;
+ ldmia sp!,{r4-r11,lr}
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ bx lr @ interoperable with Thumb ISA:-)
+.size gcm_gmult_4bit,.-gcm_gmult_4bit
+.asciz "GHASH for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
+.align 2
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4
+print $code;
+close STDOUT; # enforce flush
projects / oweals / openssl.git / commitdiff