+++ /dev/null
-
-U-Boot for Motorola (or Freescale/NXP) ColdFire processors
-
-===============================================================================
-History
-
-November 02, 2017 Angelo Dureghello <angelo@sysam.it>
-August 08, 2005 Jens Scharsig <esw@bus-elektronik.de>
- MCF5282 implementation without preloader
-January 12, 2004 <josef.baumgartner@telex.de>
-===============================================================================
-
-
-This file contains status information for the port of U-Boot to the
-Motorola ColdFire series of CPUs.
-
-
-1. Overview
-
-The ColdFire instruction set is "assembly source" compatible but an evolution
-of the original 68000 instruction set. Some not much used instructions has
-been removed. The instructions are only 16, 32, or 48 bits long, a
-simplification compared to the 68000 series.
-
-Bernhard Kuhn ported U-Boot 0.4.0 to the Motorola ColdFire architecture.
-The patches of Bernhard support the MCF5272 and MCF5282. A great disadvantage
-of these patches was that they needed a pre-bootloader to start U-Boot.
-Because of this, a new port was created which no longer needs a first stage
-booter.
-
-Thanks mainly to Freescale but also to several other contributors, U-Boot now
-supports nearly the entire range of ColdFire processors and their related
-development boards.
-
-
-2. Supported CPU families
-
-Please "make menuconfig" with ARCH=m68k, or check arch/m68k/cpu to see the
-currently supported processor and families.
-
-
-3. Supported boards
-
-U-Boot supports actually more than 40 ColdFire based boards.
-Board configuration can be done trough include/configs/<boardname>.h but the
-current recommended method is to use the new and more friendly approach as
-the "make menuconfig" way, very similar to the Linux way.
-
-To know details as memory map, build targets, default setup, etc, of a
-specific board please check:
-
-include/configs/<boardname>.h
-and/or
-configs/<boardname>_defconfig
-
-It is possible to build all ColdFire boards in a single command-line command,
-from u-boot root directory, as:
-
-./tools/buildman/buildman m68k
-
-
-3.1. Build U-Boot for a specific board
-
-A bash script similar to the one below may be used:
-
-#!/bin/bash
-
-export CROSS_COMPILE=/opt/toolchains/m68k/gcc-4.9.0-nolibc/bin/m68k-linux-
-
-board=M5475DFE
-
-make distclean
-make ARCH=m68k ${board}_defconfig
-make ARCH=m68k KBUILD_VERBOSE=1
-
-
-4. Adopted toolchains
-
-Please check:
-https://www.denx.de/wiki/U-Boot/ColdFireNotes
-
-
-5. ColdFire specific configuration options/settings
-
-
-5.1. Configuration to use a pre-loader
-
-If U-Boot should be loaded to RAM and started by a pre-loader
-CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
-initial vector table and basic processor initialization will not
-be compiled in. The start address of U-Boot must be adjusted in
-the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
-(CONFIG_SYS_TEXT_BASE) to the load address.
-
-
-5.2 ColdFire CPU specific options/settings
-
-To specify a CPU model, some defines shoudl be used, i.e.:
-
-CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs
-CONFIG_M5272 -- defined for all Motorola MCF5272 CPUs
-
-Other options, generally set inside include/configs/<boardname>.h, they may
-apply to one or more cpu for the ColdFire family:
-
-CONFIG_SYS_MBAR -- defines the base address of the MCF5272 configuration
- registers
-CONFIG_SYS_ENET_BD_BASE
- -- defines the base address of the FEC buffer descriptors
-CONFIG_SYS_SCR -- defines the contents of the System Configuration Register
-CONFIG_SYS_SPR -- defines the contents of the System Protection Register
-CONFIG_SYS_MFD -- defines the PLL Multiplication Factor Divider
- (see table 9-4 of MCF user manual)
-CONFIG_SYS_RFD -- defines the PLL Reduce Frequency Devider
- (see table 9-4 of MCF user manual)
-CONFIG_SYS_CSx_BASE
- -- defines the base address of chip select x
-CONFIG_SYS_CSx_SIZE
- -- defines the memory size (address range) of chip select x
-CONFIG_SYS_CSx_WIDTH
- -- defines the bus with of chip select x
-CONFIG_SYS_CSx_MASK
- -- defines the mask for the related chip select x
-CONFIG_SYS_CSx_RO
- -- if set to 0 chip select x is read/write else chip select
- is read only
-CONFIG_SYS_CSx_WS
- -- defines the number of wait states of chip select x
-CONFIG_SYS_CACHE_ICACR
-CONFIG_SYS_CACHE_DCACR
-CONFIG_SYS_CACHE_ACRX
- -- cache-related registers config
-CONFIG_SYS_SDRAM_BASE
-CONFIG_SYS_SDRAM_SIZE
-CONFIG_SYS_SDRAM_BASEX
-CONFIG_SYS_SDRAM_CFG1
-CONFIG_SYS_SDRAM_CFG2
-CONFIG_SYS_SDRAM_CTRL
-CONFIG_SYS_SDRAM_MODE
-CONFIG_SYS_SDRAM_EMOD
- -- SDRAM config for SDRAM controller-specific registers, please
- see arch/m68k/cpu/<specific_cpu>/start.S files to see how
- these options are used.
-CONFIG_MCFUART
- -- defines enabling of ColdFire UART driver
-CONFIG_SYS_UART_PORT
- -- defines the UART port to be used (only a single UART can be
- actually enabled)
-CONFIG_SYS_SBFHDR_SIZE
- -- size of the prepended SBF header, if any
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+M68K / ColdFire
+===============
+
+History
+-------
+* November 02, 2017 Angelo Dureghello <angelo@sysam.it>
+* August 08, 2005 Jens Scharsig <esw@bus-elektronik.de>
+ MCF5282 implementation without preloader
+* January 12, 2004 <josef.baumgartner@telex.de>
+
+This file contains status information for the port of U-Boot to the
+Motorola ColdFire series of CPUs.
+
+Overview
+--------
+
+The ColdFire instruction set is "assembly source" compatible but an evolution
+of the original 68000 instruction set. Some not much used instructions has
+been removed. The instructions are only 16, 32, or 48 bits long, a
+simplification compared to the 68000 series.
+
+Bernhard Kuhn ported U-Boot 0.4.0 to the Motorola ColdFire architecture.
+The patches of Bernhard support the MCF5272 and MCF5282. A great disadvantage
+of these patches was that they needed a pre-bootloader to start U-Boot.
+Because of this, a new port was created which no longer needs a first stage
+booter.
+
+Thanks mainly to Freescale but also to several other contributors, U-Boot now
+supports nearly the entire range of ColdFire processors and their related
+development boards.
+
+
+Supported CPU families
+----------------------
+
+Please "make menuconfig" with ARCH=m68k, or check arch/m68k/cpu to see the
+currently supported processor and families.
+
+
+Supported boards
+----------------
+
+U-Boot supports actually more than 40 ColdFire based boards.
+Board configuration can be done trough include/configs/<boardname>.h but the
+current recommended method is to use the new and more friendly approach as
+the "make menuconfig" way, very similar to the Linux way.
+
+To know details as memory map, build targets, default setup, etc, of a
+specific board please check:
+
+* include/configs/<boardname>.h
+
+and/or
+
+* configs/<boardname>_defconfig
+
+It is possible to build all ColdFire boards in a single command-line command,
+from u-boot root directory, as::
+
+ ./tools/buildman/buildman m68k
+
+Build U-Boot for a specific board
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+A bash script similar to the one below may be used:
+
+.. code-block:: shell
+
+ #!/bin/bash
+
+ export CROSS_COMPILE=/opt/toolchains/m68k/gcc-4.9.0-nolibc/bin/m68k-linux-
+
+ board=M5475DFE
+
+ make distclean
+ make ARCH=m68k ${board}_defconfig
+ make ARCH=m68k KBUILD_VERBOSE=1
+
+
+Adopted toolchains
+------------------
+
+Please check:
+https://www.denx.de/wiki/U-Boot/ColdFireNotes
+
+
+ColdFire specific configuration options/settings
+------------------------------------------------
+
+Configuration to use a pre-loader
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If U-Boot should be loaded to RAM and started by a pre-loader
+CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
+initial vector table and basic processor initialization will not
+be compiled in. The start address of U-Boot must be adjusted in
+the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
+(CONFIG_SYS_TEXT_BASE) to the load address.
+
+ColdFire CPU specific options/settings
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To specify a CPU model, some defines shoudl be used, i.e.:
+
+CONFIG_MCF52x2:
+ defined for all MCF52x2 CPUs
+CONFIG_M5272:
+ defined for all Motorola MCF5272 CPUs
+
+Other options, generally set inside include/configs/<boardname>.h, they may
+apply to one or more cpu for the ColdFire family:
+
+CONFIG_SYS_MBAR:
+ defines the base address of the MCF5272 configuration registers
+CONFIG_SYS_ENET_BD_BASE:
+ defines the base address of the FEC buffer descriptors
+CONFIG_SYS_SCR:
+ defines the contents of the System Configuration Register
+CONFIG_SYS_SPR:
+ defines the contents of the System Protection Register
+CONFIG_SYS_MFD:
+ defines the PLL Multiplication Factor Divider
+ (see table 9-4 of MCF user manual)
+CONFIG_SYS_RFD:
+ defines the PLL Reduce Frequency Devider
+ (see table 9-4 of MCF user manual)
+CONFIG_SYS_CSx_BASE:
+ defines the base address of chip select x
+CONFIG_SYS_CSx_SIZE:
+ defines the memory size (address range) of chip select x
+CONFIG_SYS_CSx_WIDTH:
+ defines the bus with of chip select x
+CONFIG_SYS_CSx_MASK:
+ defines the mask for the related chip select x
+CONFIG_SYS_CSx_RO:
+ if set to 0 chip select x is read/write else chip select is read only
+CONFIG_SYS_CSx_WS:
+ defines the number of wait states of chip select x
+CONFIG_SYS_CACHE_ICACR:
+ cache-related registers config
+CONFIG_SYS_CACHE_DCACR:
+ cache-related registers config
+CONFIG_SYS_CACHE_ACRX:
+ cache-related registers config
+CONFIG_SYS_SDRAM_BASE:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_SIZE:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_BASEX:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_CFG1:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_CFG2:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_CTRL:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_MODE:
+ SDRAM config for SDRAM controller-specific registers
+CONFIG_SYS_SDRAM_EMOD:
+ SDRAM config for SDRAM controller-specific registers, please
+ see arch/m68k/cpu/<specific_cpu>/start.S files to see how
+ these options are used.
+CONFIG_MCFUART:
+ defines enabling of ColdFire UART driver
+CONFIG_SYS_UART_PORT:
+ defines the UART port to be used (only a single UART can be actually enabled)
+CONFIG_SYS_SBFHDR_SIZE:
+ size of the prepended SBF header, if any
projects / oweals / u-boot.git / commitdiff