ARM: DT: stm32f7: add usart1 & clock device tree nodes

Also created alias for usart1 and specified oscillator clock for stm32f7
discovery board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index bad0698193e34f5004598f9203ebd64f5ccd555d..454b515db38e082b02cd935de98b4d914b2cf3ed 100644 (file)
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -61,10 +61,15 @@
        };
 
        aliases {
+               serial0 = &usart1;
                spi0 = &qspi;
        };
 };
 
+&clk_hse {
+       clock-frequency = <25000000>;
+};
+
 &mac {
        status = "okay";
        phy-mode = "rmii";

diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index 3902e7625f731f8a412a957d8846895651c016f7..afcd3277c5bd0a40d2ad97de96f79046e78f3684 100644 (file)
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -48,7 +48,16 @@
 #include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
 
 / {
+       clocks {
+               clk_hse: clk-hse {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <0>;
+               };
+};
+
        soc {
+               u-boot,dm-pre-reloc;
                mac: ethernet@40028000 {
                        compatible = "st,stm32-dwmac";
                        reg = <0x40028000 0x8000>;
@@ -71,6 +80,24 @@
                        spi-max-frequency = <108000000>;
                        status = "disabled";
                };
+               usart1: serial@40011000 {
+                       compatible = "st,stm32-usart", "st,stm32-uart";
+                       reg = <0x40011000 0x400>;
+                       interrupts = <37>;
+                       clocks = <&rcc 0 164>;
+                       status = "disabled";
+                       u-boot,dm-pre-reloc;
+               };
+               rcc: rcc@40023810 {
+                       #reset-cells = <1>;
+                       #clock-cells = <2>;
+                       compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+                       reg = <0x40023800 0x400>;
+                       clocks = <&clk_hse>;
+                       u-boot,dm-pre-reloc;
+               };
+
+
        };
 };